drivers/usb/storage/isd200.c

   1 /* Transport & Protocol Driver for In-System Design, Inc. ISD200 ASIC
   2  *
   3  * Current development and maintenance:
   4  *   (C) 2001-2002 Björn Stenberg ([email protected])
   5  *
   6  * Developed with the assistance of:
   7  *   (C) 2002 Alan Stern <[email protected]>
   8  *
   9  * Initial work:
  10  *   (C) 2000 In-System Design, Inc. ([email protected])
  11  *
  12  * The ISD200 ASIC does not natively support ATA devices.  The chip
  13  * does implement an interface, the ATA Command Block (ATACB) which provides
  14  * a means of passing ATA commands and ATA register accesses to a device.
  15  *
  16  * This program is free software; you can redistribute it and/or modify it
  17  * under the terms of the GNU General Public License as published by the
  18  * Free Software Foundation; either version 2, or (at your option) any
  19  * later version.
  20  *
  21  * This program is distributed in the hope that it will be useful, but
  22  * WITHOUT ANY WARRANTY; without even the implied warranty of
  23  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  24  * General Public License for more details.
  25  *
  26  * You should have received a copy of the GNU General Public License along
  27  * with this program; if not, write to the Free Software Foundation, Inc.,
  28  * 675 Mass Ave, Cambridge, MA 02139, USA.
  29  *
  30  * History:
  31  *
  32  *  2002-10-19: Removed the specialized transfer routines.
  33  *              (Alan Stern <[email protected]>)
  34  *  2001-02-24: Removed lots of duplicate code and simplified the structure.
  35  *            ([email protected])
  36  *  2002-01-16: Fixed endianness bug so it works on the ppc arch.
  37  *            (Luc Saillard <[email protected]>)
  38  *  2002-01-17: All bitfields removed.
  39  *            ([email protected])
  40  */
  41
  42
  43 /* Include files */
  44
  45 #include <linux/jiffies.h>
  46 #include <linux/errno.h>
  47 #include <linux/module.h>
  48 #include <linux/slab.h>
  49 #include <linux/ata.h>
  50 #include <linux/hdreg.h>
  51 #include <linux/scatterlist.h>
  52
  53 #include <scsi/scsi.h>
  54 #include <scsi/scsi_cmnd.h>
  55 #include <scsi/scsi_device.h>
  56
  57 #include "usb.h"
  58 #include "transport.h"
  59 #include "protocol.h"
  60 #include "debug.h"
  61 #include "scsiglue.h"
  62
  63 MODULE_DESCRIPTION("Driver for In-System Design, Inc. ISD200 ASIC");
  64 MODULE_AUTHOR("Björn Stenberg <[email protected]>");
  65 MODULE_LICENSE("GPL");
  66
  67 static int isd200_Initialization(struct us_data *us);
  68
  69
  70 /*
  71  * The table of devices
  72  */
  73 #define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
  74                     vendorName, productName, useProtocol, useTransport, \
  75                     initFunction, flags) \
  76 { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
  77   .driver_info = (flags) }
  78
  79 static struct usb_device_id isd200_usb_ids[] = {
  80 #       include "unusual_isd200.h"
  81         { }             /* Terminating entry */
  82 };
  83 MODULE_DEVICE_TABLE(usb, isd200_usb_ids);
  84
  85 #undef UNUSUAL_DEV
  86
  87 /*
  88  * The flags table
  89  */
  90 #define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
  91                     vendor_name, product_name, use_protocol, use_transport, \
  92                     init_function, Flags) \
  93 { \
  94         .vendorName = vendor_name,      \
  95         .productName = product_name,    \
  96         .useProtocol = use_protocol,    \
  97         .useTransport = use_transport,  \
  98         .initFunction = init_function,  \
  99 }
 100
 101 static struct us_unusual_dev isd200_unusual_dev_list[] = {
 102 #       include "unusual_isd200.h"
 103         { }             /* Terminating entry */
 104 };
 105
 106 #undef UNUSUAL_DEV
 107
 108 /* Timeout defines (in Seconds) */
 109
 110 #define ISD200_ENUM_BSY_TIMEOUT         35
 111 #define ISD200_ENUM_DETECT_TIMEOUT      30
 112 #define ISD200_DEFAULT_TIMEOUT          30
 113
 114 /* device flags */
 115 #define DF_ATA_DEVICE           0x0001
 116 #define DF_MEDIA_STATUS_ENABLED 0x0002
 117 #define DF_REMOVABLE_MEDIA      0x0004
 118
 119 /* capability bit definitions */
 120 #define CAPABILITY_DMA          0x01
 121 #define CAPABILITY_LBA          0x02
 122
 123 /* command_setX bit definitions */
 124 #define COMMANDSET_REMOVABLE    0x02
 125 #define COMMANDSET_MEDIA_STATUS 0x10
 126
 127 /* ATA Vendor Specific defines */
 128 #define ATA_ADDRESS_DEVHEAD_STD      0xa0
 129 #define ATA_ADDRESS_DEVHEAD_LBA_MODE 0x40
 130 #define ATA_ADDRESS_DEVHEAD_SLAVE    0x10
 131
 132 /* Action Select bits */
 133 #define ACTION_SELECT_0      0x01
 134 #define ACTION_SELECT_1      0x02
 135 #define ACTION_SELECT_2      0x04
 136 #define ACTION_SELECT_3      0x08
 137 #define ACTION_SELECT_4      0x10
 138 #define ACTION_SELECT_5      0x20
 139 #define ACTION_SELECT_6      0x40
 140 #define ACTION_SELECT_7      0x80
 141
 142 /* Register Select bits */
 143 #define REG_ALTERNATE_STATUS    0x01
 144 #define REG_DEVICE_CONTROL      0x01
 145 #define REG_ERROR               0x02
 146 #define REG_FEATURES            0x02
 147 #define REG_SECTOR_COUNT        0x04
 148 #define REG_SECTOR_NUMBER       0x08
 149 #define REG_CYLINDER_LOW        0x10
 150 #define REG_CYLINDER_HIGH       0x20
 151 #define REG_DEVICE_HEAD         0x40
 152 #define REG_STATUS              0x80
 153 #define REG_COMMAND             0x80
 154
 155 /* ATA registers offset definitions */
 156 #define ATA_REG_ERROR_OFFSET            1
 157 #define ATA_REG_LCYL_OFFSET             4
 158 #define ATA_REG_HCYL_OFFSET             5
 159 #define ATA_REG_STATUS_OFFSET           7
 160
 161 /* ATA error definitions not in <linux/hdreg.h> */
 162 #define ATA_ERROR_MEDIA_CHANGE          0x20
 163
 164 /* ATA command definitions not in <linux/hdreg.h> */
 165 #define ATA_COMMAND_GET_MEDIA_STATUS    0xDA
 166 #define ATA_COMMAND_MEDIA_EJECT         0xED
 167
 168 /* ATA drive control definitions */
 169 #define ATA_DC_DISABLE_INTERRUPTS       0x02
 170 #define ATA_DC_RESET_CONTROLLER         0x04
 171 #define ATA_DC_REENABLE_CONTROLLER      0x00
 172
 173 /*
 174  *  General purpose return codes
 175  */
 176
 177 #define ISD200_ERROR            -1
 178 #define ISD200_GOOD              0
 179
 180 /*
 181  * Transport return codes
 182  */
 183
 184 #define ISD200_TRANSPORT_GOOD       0   /* Transport good, command good     */
 185 #define ISD200_TRANSPORT_FAILED     1   /* Transport good, command failed   */
 186 #define ISD200_TRANSPORT_ERROR      2   /* Transport bad (i.e. device dead) */
 187
 188 /* driver action codes */
 189 #define ACTION_READ_STATUS      0
 190 #define ACTION_RESET            1
 191 #define ACTION_REENABLE         2
 192 #define ACTION_SOFT_RESET       3
 193 #define ACTION_ENUM             4
 194 #define ACTION_IDENTIFY         5
 195
 196
 197 /*
 198  * ata_cdb struct
 199  */
 200
 201
 202 union ata_cdb {
 203         struct {
 204                 unsigned char SignatureByte0;
 205                 unsigned char SignatureByte1;
 206                 unsigned char ActionSelect;
 207                 unsigned char RegisterSelect;
 208                 unsigned char TransferBlockSize;
 209                 unsigned char WriteData3F6;
 210                 unsigned char WriteData1F1;
 211                 unsigned char WriteData1F2;
 212                 unsigned char WriteData1F3;
 213                 unsigned char WriteData1F4;
 214                 unsigned char WriteData1F5;
 215                 unsigned char WriteData1F6;
 216                 unsigned char WriteData1F7;
 217                 unsigned char Reserved[3];
 218         } generic;
 219
 220         struct {
 221                 unsigned char SignatureByte0;
 222                 unsigned char SignatureByte1;
 223                 unsigned char ActionSelect;
 224                 unsigned char RegisterSelect;
 225                 unsigned char TransferBlockSize;
 226                 unsigned char AlternateStatusByte;
 227                 unsigned char ErrorByte;
 228                 unsigned char SectorCountByte;
 229                 unsigned char SectorNumberByte;
 230                 unsigned char CylinderLowByte;
 231                 unsigned char CylinderHighByte;
 232                 unsigned char DeviceHeadByte;
 233                 unsigned char StatusByte;
 234                 unsigned char Reserved[3];
 235         } read;
 236
 237         struct {
 238                 unsigned char SignatureByte0;
 239                 unsigned char SignatureByte1;
 240                 unsigned char ActionSelect;
 241                 unsigned char RegisterSelect;
 242                 unsigned char TransferBlockSize;
 243                 unsigned char DeviceControlByte;
 244                 unsigned char FeaturesByte;
 245                 unsigned char SectorCountByte;
 246                 unsigned char SectorNumberByte;
 247                 unsigned char CylinderLowByte;
 248                 unsigned char CylinderHighByte;
 249                 unsigned char DeviceHeadByte;
 250                 unsigned char CommandByte;
 251                 unsigned char Reserved[3];
 252         } write;
 253 };
 254
 255
 256 /*
 257  * Inquiry data structure. This is the data returned from the target
 258  * after it receives an inquiry.
 259  *
 260  * This structure may be extended by the number of bytes specified
 261  * in the field AdditionalLength. The defined size constant only
 262  * includes fields through ProductRevisionLevel.
 263  */
 264
 265 /*
 266  * DeviceType field
 267  */
 268 #define DIRECT_ACCESS_DEVICE        0x00    /* disks */
 269 #define DEVICE_REMOVABLE                0x80
 270
 271 struct inquiry_data {
 272         unsigned char DeviceType;
 273         unsigned char DeviceTypeModifier;
 274         unsigned char Versions;
 275         unsigned char Format;
 276         unsigned char AdditionalLength;
 277         unsigned char Reserved[2];
 278         unsigned char Capability;
 279         unsigned char VendorId[8];
 280         unsigned char ProductId[16];
 281         unsigned char ProductRevisionLevel[4];
 282         unsigned char VendorSpecific[20];
 283         unsigned char Reserved3[40];
 284 } __attribute__ ((packed));
 285
 286 /*
 287  * INQUIRY data buffer size
 288  */
 289
 290 #define INQUIRYDATABUFFERSIZE 36
 291
 292
 293 /*
 294  * ISD200 CONFIG data struct
 295  */
 296
 297 #define ATACFG_TIMING     0x0f
 298 #define ATACFG_ATAPI_RESET     0x10
 299 #define ATACFG_MASTER     0x20
 300 #define ATACFG_BLOCKSIZE       0xa0
 301
 302 #define ATACFGE_LAST_LUN       0x07
 303 #define ATACFGE_DESC_OVERRIDE  0x08
 304 #define ATACFGE_STATE_SUSPEND  0x10
 305 #define ATACFGE_SKIP_BOOT      0x20
 306 #define ATACFGE_CONF_DESC2     0x40
 307 #define ATACFGE_INIT_STATUS    0x80
 308
 309 #define CFG_CAPABILITY_SRST    0x01
 310
 311 struct isd200_config {
 312         unsigned char EventNotification;
 313         unsigned char ExternalClock;
 314         unsigned char ATAInitTimeout;
 315         unsigned char ATAConfig;
 316         unsigned char ATAMajorCommand;
 317         unsigned char ATAMinorCommand;
 318         unsigned char ATAExtraConfig;
 319         unsigned char Capability;
 320 }__attribute__ ((packed));
 321
 322
 323 /*
 324  * ISD200 driver information struct
 325  */
 326
 327 struct isd200_info {
 328         struct inquiry_data InquiryData;
 329         u16 *id;
 330         struct isd200_config ConfigData;
 331         unsigned char *RegsBuf;
 332         unsigned char ATARegs[8];
 333         unsigned char DeviceHead;
 334         unsigned char DeviceFlags;
 335
 336         /* maximum number of LUNs supported */
 337         unsigned char MaxLUNs;
 338         unsigned char cmnd[BLK_MAX_CDB];
 339         struct scsi_cmnd srb;
 340         struct scatterlist sg;
 341 };
 342
 343
 344 /*
 345  * Read Capacity Data - returned in Big Endian format
 346  */
 347
 348 struct read_capacity_data {
 349         __be32 LogicalBlockAddress;
 350         __be32 BytesPerBlock;
 351 };
 352
 353 /*
 354  * Read Block Limits Data - returned in Big Endian format
 355  * This structure returns the maximum and minimum block
 356  * size for a TAPE device.
 357  */
 358
 359 struct read_block_limits {
 360         unsigned char Reserved;
 361         unsigned char BlockMaximumSize[3];
 362         unsigned char BlockMinimumSize[2];
 363 };
 364
 365
 366 /*
 367  * Sense Data Format
 368  */
 369
 370 #define SENSE_ERRCODE      0x7f
 371 #define SENSE_ERRCODE_VALID     0x80
 372 #define SENSE_FLAG_SENSE_KEY    0x0f
 373 #define SENSE_FLAG_BAD_LENGTH   0x20
 374 #define SENSE_FLAG_END_OF_MEDIA 0x40
 375 #define SENSE_FLAG_FILE_MARK    0x80
 376 struct sense_data {
 377         unsigned char ErrorCode;
 378         unsigned char SegmentNumber;
 379         unsigned char Flags;
 380         unsigned char Information[4];
 381         unsigned char AdditionalSenseLength;
 382         unsigned char CommandSpecificInformation[4];
 383         unsigned char AdditionalSenseCode;
 384         unsigned char AdditionalSenseCodeQualifier;
 385         unsigned char FieldReplaceableUnitCode;
 386         unsigned char SenseKeySpecific[3];
 387 } __attribute__ ((packed));
 388
 389 /*
 390  * Default request sense buffer size
 391  */
 392
 393 #define SENSE_BUFFER_SIZE 18
 394
 395 /***********************************************************************
 396  * Helper routines
 397  ***********************************************************************/
 398
 399 /**************************************************************************
 400  * isd200_build_sense
 401  *
 402  *  Builds an artificial sense buffer to report the results of a
 403  *  failed command.
 404  *
 405  * RETURNS:
 406  *    void
 407  */
 408 static void isd200_build_sense(struct us_data *us, struct scsi_cmnd *srb)
 409 {
 410         struct isd200_info *info = (struct isd200_info *)us->extra;
 411         struct sense_data *buf = (struct sense_data *) &srb->sense_buffer[0];
 412         unsigned char error = info->ATARegs[ATA_REG_ERROR_OFFSET];
 413
 414         if(error & ATA_ERROR_MEDIA_CHANGE) {
 415                 buf->ErrorCode = 0x70 | SENSE_ERRCODE_VALID;
 416                 buf->AdditionalSenseLength = 0xb;
 417                 buf->Flags = UNIT_ATTENTION;
 418                 buf->AdditionalSenseCode = 0;
 419                 buf->AdditionalSenseCodeQualifier = 0;
 420         } else if (error & ATA_MCR) {
 421                 buf->ErrorCode = 0x70 | SENSE_ERRCODE_VALID;
 422                 buf->AdditionalSenseLength = 0xb;
 423                 buf->Flags =  UNIT_ATTENTION;
 424                 buf->AdditionalSenseCode = 0;
 425                 buf->AdditionalSenseCodeQualifier = 0;
 426         } else if (error & ATA_TRK0NF) {
 427                 buf->ErrorCode = 0x70 | SENSE_ERRCODE_VALID;
 428                 buf->AdditionalSenseLength = 0xb;
 429                 buf->Flags =  NOT_READY;
 430                 buf->AdditionalSenseCode = 0;
 431                 buf->AdditionalSenseCodeQualifier = 0;
 432         } else if (error & ATA_UNC) {
 433                 buf->ErrorCode = 0x70 | SENSE_ERRCODE_VALID;
 434                 buf->AdditionalSenseLength = 0xb;
 435                 buf->Flags =  DATA_PROTECT;
 436                 buf->AdditionalSenseCode = 0;
 437                 buf->AdditionalSenseCodeQualifier = 0;
 438         } else {
 439                 buf->ErrorCode = 0;
 440                 buf->AdditionalSenseLength = 0;
 441                 buf->Flags =  0;
 442                 buf->AdditionalSenseCode = 0;
 443                 buf->AdditionalSenseCodeQualifier = 0;
 444         }
 445 }
 446
 447
 448 /***********************************************************************
 449  * Transport routines
 450  ***********************************************************************/
 451
 452 /**************************************************************************
 453  *  isd200_set_srb(), isd200_srb_set_bufflen()
 454  *
 455  * Two helpers to facilitate in initialization of scsi_cmnd structure
 456  * Will need to change when struct scsi_cmnd changes
 457  */
 458 static void isd200_set_srb(struct isd200_info *info,
 459         enum dma_data_direction dir, void* buff, unsigned bufflen)
 460 {
 461         struct scsi_cmnd *srb = &info->srb;
 462
 463         if (buff)
 464                 sg_init_one(&info->sg, buff, bufflen);
 465
 466         srb->sc_data_direction = dir;
 467         srb->sdb.table.sgl = buff ? &info->sg : NULL;
 468         srb->sdb.length = bufflen;
 469         srb->sdb.table.nents = buff ? 1 : 0;
 470 }
 471
 472 static void isd200_srb_set_bufflen(struct scsi_cmnd *srb, unsigned bufflen)
 473 {
 474         srb->sdb.length = bufflen;
 475 }
 476
 477
 478 /**************************************************************************
 479  *  isd200_action
 480  *
 481  * Routine for sending commands to the isd200
 482  *
 483  * RETURNS:
 484  *    ISD status code
 485  */
 486 static int isd200_action( struct us_data *us, int action,
 487                           void* pointer, int value )
 488 {
 489         union ata_cdb ata;
 490         /* static to prevent this large struct being placed on the valuable stack */
 491         static struct scsi_device srb_dev;
 492         struct isd200_info *info = (struct isd200_info *)us->extra;
 493         struct scsi_cmnd *srb = &info->srb;
 494         int status;
 495
 496         memset(&ata, 0, sizeof(ata));
 497         srb->cmnd = info->cmnd;
 498         srb->device = &srb_dev;
 499
 500         ata.generic.SignatureByte0 = info->ConfigData.ATAMajorCommand;
 501         ata.generic.SignatureByte1 = info->ConfigData.ATAMinorCommand;
 502         ata.generic.TransferBlockSize = 1;
 503
 504         switch ( action ) {
 505         case ACTION_READ_STATUS:
 506                 US_DEBUGP("   isd200_action(READ_STATUS)\n");
 507                 ata.generic.ActionSelect = ACTION_SELECT_0|ACTION_SELECT_2;
 508                 ata.generic.RegisterSelect =
 509                   REG_CYLINDER_LOW | REG_CYLINDER_HIGH |
 510                   REG_STATUS | REG_ERROR;
 511                 isd200_set_srb(info, DMA_FROM_DEVICE, pointer, value);
 512                 break;
 513
 514         case ACTION_ENUM:
 515                 US_DEBUGP("   isd200_action(ENUM,0x%02x)\n",value);
 516                 ata.generic.ActionSelect = ACTION_SELECT_1|ACTION_SELECT_2|
 517                                            ACTION_SELECT_3|ACTION_SELECT_4|
 518                                            ACTION_SELECT_5;
 519                 ata.generic.RegisterSelect = REG_DEVICE_HEAD;
 520                 ata.write.DeviceHeadByte = value;
 521                 isd200_set_srb(info, DMA_NONE, NULL, 0);
 522                 break;
 523
 524         case ACTION_RESET:
 525                 US_DEBUGP("   isd200_action(RESET)\n");
 526                 ata.generic.ActionSelect = ACTION_SELECT_1|ACTION_SELECT_2|
 527                                            ACTION_SELECT_3|ACTION_SELECT_4;
 528                 ata.generic.RegisterSelect = REG_DEVICE_CONTROL;
 529                 ata.write.DeviceControlByte = ATA_DC_RESET_CONTROLLER;
 530                 isd200_set_srb(info, DMA_NONE, NULL, 0);
 531                 break;
 532
 533         case ACTION_REENABLE:
 534                 US_DEBUGP("   isd200_action(REENABLE)\n");
 535                 ata.generic.ActionSelect = ACTION_SELECT_1|ACTION_SELECT_2|
 536                                            ACTION_SELECT_3|ACTION_SELECT_4;
 537                 ata.generic.RegisterSelect = REG_DEVICE_CONTROL;
 538                 ata.write.DeviceControlByte = ATA_DC_REENABLE_CONTROLLER;
 539                 isd200_set_srb(info, DMA_NONE, NULL, 0);
 540                 break;
 541
 542         case ACTION_SOFT_RESET:
 543                 US_DEBUGP("   isd200_action(SOFT_RESET)\n");
 544                 ata.generic.ActionSelect = ACTION_SELECT_1|ACTION_SELECT_5;
 545                 ata.generic.RegisterSelect = REG_DEVICE_HEAD | REG_COMMAND;
 546                 ata.write.DeviceHeadByte = info->DeviceHead;
 547                 ata.write.CommandByte = ATA_CMD_DEV_RESET;
 548                 isd200_set_srb(info, DMA_NONE, NULL, 0);
 549                 break;
 550
 551         case ACTION_IDENTIFY:
 552                 US_DEBUGP("   isd200_action(IDENTIFY)\n");
 553                 ata.generic.RegisterSelect = REG_COMMAND;
 554                 ata.write.CommandByte = ATA_CMD_ID_ATA;
 555                 isd200_set_srb(info, DMA_FROM_DEVICE, info->id,
 556                                 ATA_ID_WORDS * 2);
 557                 break;
 558
 559         default:
 560                 US_DEBUGP("Error: Undefined action %d\n",action);
 561                 return ISD200_ERROR;
 562         }
 563
 564         memcpy(srb->cmnd, &ata, sizeof(ata.generic));
 565         srb->cmd_len = sizeof(ata.generic);
 566         status = usb_stor_Bulk_transport(srb, us);
 567         if (status == USB_STOR_TRANSPORT_GOOD)
 568                 status = ISD200_GOOD;
 569         else {
 570                 US_DEBUGP("   isd200_action(0x%02x) error: %d\n",action,status);
 571                 status = ISD200_ERROR;
 572                 /* need to reset device here */
 573         }
 574
 575         return status;
 576 }
 577
 578 /**************************************************************************
 579  * isd200_read_regs
 580  *
 581  * Read ATA Registers
 582  *
 583  * RETURNS:
 584  *    ISD status code
 585  */
 586 static int isd200_read_regs( struct us_data *us )
 587 {
 588         struct isd200_info *info = (struct isd200_info *)us->extra;
 589         int retStatus = ISD200_GOOD;
 590         int transferStatus;
 591
 592         US_DEBUGP("Entering isd200_IssueATAReadRegs\n");
 593
 594         transferStatus = isd200_action( us, ACTION_READ_STATUS,
 595                                     info->RegsBuf, sizeof(info->ATARegs) );
 596         if (transferStatus != ISD200_TRANSPORT_GOOD) {
 597                 US_DEBUGP("   Error reading ATA registers\n");
 598                 retStatus = ISD200_ERROR;
 599         } else {
 600                 memcpy(info->ATARegs, info->RegsBuf, sizeof(info->ATARegs));
 601                 US_DEBUGP("   Got ATA Register[ATA_REG_ERROR_OFFSET] = 0x%x\n",
 602                           info->ATARegs[ATA_REG_ERROR_OFFSET]);
 603         }
 604
 605         return retStatus;
 606 }
 607
 608
 609 /**************************************************************************
 610  * Invoke the transport and basic error-handling/recovery methods
 611  *
 612  * This is used by the protocol layers to actually send the message to
 613  * the device and receive the response.
 614  */
 615 static void isd200_invoke_transport( struct us_data *us,
 616                               struct scsi_cmnd *srb,
 617                               union ata_cdb *ataCdb )
 618 {
 619         int need_auto_sense = 0;
 620         int transferStatus;
 621         int result;
 622
 623         /* send the command to the transport layer */
 624         memcpy(srb->cmnd, ataCdb, sizeof(ataCdb->generic));
 625         srb->cmd_len = sizeof(ataCdb->generic);
 626         transferStatus = usb_stor_Bulk_transport(srb, us);
 627
 628         /* if the command gets aborted by the higher layers, we need to
 629          * short-circuit all other processing
 630          */
 631         if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) {
 632                 US_DEBUGP("-- command was aborted\n");
 633                 goto Handle_Abort;
 634         }
 635
 636         switch (transferStatus) {
 637
 638         case USB_STOR_TRANSPORT_GOOD:
 639                 /* Indicate a good result */
 640                 srb->result = SAM_STAT_GOOD;
 641                 break;
 642
 643         case USB_STOR_TRANSPORT_NO_SENSE:
 644                 US_DEBUGP("-- transport indicates protocol failure\n");
 645                 srb->result = SAM_STAT_CHECK_CONDITION;
 646                 return;
 647
 648         case USB_STOR_TRANSPORT_FAILED:
 649                 US_DEBUGP("-- transport indicates command failure\n");
 650                 need_auto_sense = 1;
 651                 break;
 652
 653         case USB_STOR_TRANSPORT_ERROR:
 654                 US_DEBUGP("-- transport indicates transport error\n");
 655                 srb->result = DID_ERROR << 16;
 656                 /* Need reset here */
 657                 return;
 658
 659         default:
 660                 US_DEBUGP("-- transport indicates unknown error\n");
 661                 srb->result = DID_ERROR << 16;
 662                 /* Need reset here */
 663                 return;
 664         }
 665
 666         if ((scsi_get_resid(srb) > 0) &&
 667             !((srb->cmnd[0] == REQUEST_SENSE) ||
 668               (srb->cmnd[0] == INQUIRY) ||
 669               (srb->cmnd[0] == MODE_SENSE) ||
 670               (srb->cmnd[0] == LOG_SENSE) ||
 671               (srb->cmnd[0] == MODE_SENSE_10))) {
 672                 US_DEBUGP("-- unexpectedly short transfer\n");
 673                 need_auto_sense = 1;
 674         }
 675
 676         if (need_auto_sense) {
 677                 result = isd200_read_regs(us);
 678                 if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) {
 679                         US_DEBUGP("-- auto-sense aborted\n");
 680                         goto Handle_Abort;
 681                 }
 682                 if (result == ISD200_GOOD) {
 683                         isd200_build_sense(us, srb);
 684                         srb->result = SAM_STAT_CHECK_CONDITION;
 685
 686                         /* If things are really okay, then let's show that */
 687                         if ((srb->sense_buffer[2] & 0xf) == 0x0)
 688                                 srb->result = SAM_STAT_GOOD;
 689                 } else {
 690                         srb->result = DID_ERROR << 16;
 691                         /* Need reset here */
 692                 }
 693         }
 694
 695         /* Regardless of auto-sense, if we _know_ we have an error
 696          * condition, show that in the result code
 697          */
 698         if (transferStatus == USB_STOR_TRANSPORT_FAILED)
 699                 srb->result = SAM_STAT_CHECK_CONDITION;
 700         return;
 701
 702         /* abort processing: the bulk-only transport requires a reset
 703          * following an abort */
 704         Handle_Abort:
 705         srb->result = DID_ABORT << 16;
 706
 707         /* permit the reset transfer to take place */
 708         clear_bit(US_FLIDX_ABORTING, &us->dflags);
 709         /* Need reset here */
 710 }
 711
 712 #ifdef CONFIG_USB_STORAGE_DEBUG
 713 static void isd200_log_config( struct isd200_info* info )
 714 {
 715         US_DEBUGP("      Event Notification: 0x%x\n",
 716                   info->ConfigData.EventNotification);
 717         US_DEBUGP("      External Clock: 0x%x\n",
 718                   info->ConfigData.ExternalClock);
 719         US_DEBUGP("      ATA Init Timeout: 0x%x\n",
 720                   info->ConfigData.ATAInitTimeout);
 721         US_DEBUGP("      ATAPI Command Block Size: 0x%x\n",
 722                   (info->ConfigData.ATAConfig & ATACFG_BLOCKSIZE) >> 6);
 723         US_DEBUGP("      Master/Slave Selection: 0x%x\n",
 724                   info->ConfigData.ATAConfig & ATACFG_MASTER);
 725         US_DEBUGP("      ATAPI Reset: 0x%x\n",
 726                   info->ConfigData.ATAConfig & ATACFG_ATAPI_RESET);
 727         US_DEBUGP("      ATA Timing: 0x%x\n",
 728                   info->ConfigData.ATAConfig & ATACFG_TIMING);
 729         US_DEBUGP("      ATA Major Command: 0x%x\n",
 730                   info->ConfigData.ATAMajorCommand);
 731         US_DEBUGP("      ATA Minor Command: 0x%x\n",
 732                   info->ConfigData.ATAMinorCommand);
 733         US_DEBUGP("      Init Status: 0x%x\n",
 734                   info->ConfigData.ATAExtraConfig & ATACFGE_INIT_STATUS);
 735         US_DEBUGP("      Config Descriptor 2: 0x%x\n",
 736                   info->ConfigData.ATAExtraConfig & ATACFGE_CONF_DESC2);
 737         US_DEBUGP("      Skip Device Boot: 0x%x\n",
 738                   info->ConfigData.ATAExtraConfig & ATACFGE_SKIP_BOOT);
 739         US_DEBUGP("      ATA 3 State Supsend: 0x%x\n",
 740                   info->ConfigData.ATAExtraConfig & ATACFGE_STATE_SUSPEND);
 741         US_DEBUGP("      Descriptor Override: 0x%x\n",
 742                   info->ConfigData.ATAExtraConfig & ATACFGE_DESC_OVERRIDE);
 743         US_DEBUGP("      Last LUN Identifier: 0x%x\n",
 744                   info->ConfigData.ATAExtraConfig & ATACFGE_LAST_LUN);
 745         US_DEBUGP("      SRST Enable: 0x%x\n",
 746                   info->ConfigData.ATAExtraConfig & CFG_CAPABILITY_SRST);
 747 }
 748 #endif
 749
 750 /**************************************************************************
 751  * isd200_write_config
 752  *
 753  * Write the ISD200 Configuration data
 754  *
 755  * RETURNS:
 756  *    ISD status code
 757  */
 758 static int isd200_write_config( struct us_data *us )
 759 {
 760         struct isd200_info *info = (struct isd200_info *)us->extra;
 761         int retStatus = ISD200_GOOD;
 762         int result;
 763
 764 #ifdef CONFIG_USB_STORAGE_DEBUG
 765         US_DEBUGP("Entering isd200_write_config\n");
 766         US_DEBUGP("   Writing the following ISD200 Config Data:\n");
 767         isd200_log_config(info);
 768 #endif
 769
 770         /* let's send the command via the control pipe */
 771         result = usb_stor_ctrl_transfer(
 772                 us,
 773                 us->send_ctrl_pipe,
 774                 0x01,
 775                 USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
 776                 0x0000,
 777                 0x0002,
 778                 (void *) &info->ConfigData,
 779                 sizeof(info->ConfigData));
 780
 781         if (result >= 0) {
 782                 US_DEBUGP("   ISD200 Config Data was written successfully\n");
 783         } else {
 784                 US_DEBUGP("   Request to write ISD200 Config Data failed!\n");
 785                 retStatus = ISD200_ERROR;
 786         }
 787
 788         US_DEBUGP("Leaving isd200_write_config %08X\n", retStatus);
 789         return retStatus;
 790 }
 791
 792
 793 /**************************************************************************
 794  * isd200_read_config
 795  *
 796  * Reads the ISD200 Configuration data
 797  *
 798  * RETURNS:
 799  *    ISD status code
 800  */
 801 static int isd200_read_config( struct us_data *us )
 802 {
 803         struct isd200_info *info = (struct isd200_info *)us->extra;
 804         int retStatus = ISD200_GOOD;
 805         int result;
 806
 807         US_DEBUGP("Entering isd200_read_config\n");
 808
 809         /* read the configuration information from ISD200.  Use this to */
 810         /* determine what the special ATA CDB bytes are.                */
 811
 812         result = usb_stor_ctrl_transfer(
 813                 us,
 814                 us->recv_ctrl_pipe,
 815                 0x02,
 816                 USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
 817                 0x0000,
 818                 0x0002,
 819                 (void *) &info->ConfigData,
 820                 sizeof(info->ConfigData));
 821
 822
 823         if (result >= 0) {
 824                 US_DEBUGP("   Retrieved the following ISD200 Config Data:\n");
 825 #ifdef CONFIG_USB_STORAGE_DEBUG
 826                 isd200_log_config(info);
 827 #endif
 828         } else {
 829                 US_DEBUGP("   Request to get ISD200 Config Data failed!\n");
 830                 retStatus = ISD200_ERROR;
 831         }
 832
 833         US_DEBUGP("Leaving isd200_read_config %08X\n", retStatus);
 834         return retStatus;
 835 }
 836
 837
 838 /**************************************************************************
 839  * isd200_atapi_soft_reset
 840  *
 841  * Perform an Atapi Soft Reset on the device
 842  *
 843  * RETURNS:
 844  *    NT status code
 845  */
 846 static int isd200_atapi_soft_reset( struct us_data *us )
 847 {
 848         int retStatus = ISD200_GOOD;
 849         int transferStatus;
 850
 851         US_DEBUGP("Entering isd200_atapi_soft_reset\n");
 852
 853         transferStatus = isd200_action( us, ACTION_SOFT_RESET, NULL, 0 );
 854         if (transferStatus != ISD200_TRANSPORT_GOOD) {
 855                 US_DEBUGP("   Error issuing Atapi Soft Reset\n");
 856                 retStatus = ISD200_ERROR;
 857         }
 858
 859         US_DEBUGP("Leaving isd200_atapi_soft_reset %08X\n", retStatus);
 860         return retStatus;
 861 }
 862
 863
 864 /**************************************************************************
 865  * isd200_srst
 866  *
 867  * Perform an SRST on the device
 868  *
 869  * RETURNS:
 870  *    ISD status code
 871  */
 872 static int isd200_srst( struct us_data *us )
 873 {
 874         int retStatus = ISD200_GOOD;
 875         int transferStatus;
 876
 877         US_DEBUGP("Entering isd200_SRST\n");
 878
 879         transferStatus = isd200_action( us, ACTION_RESET, NULL, 0 );
 880
 881         /* check to see if this request failed */
 882         if (transferStatus != ISD200_TRANSPORT_GOOD) {
 883                 US_DEBUGP("   Error issuing SRST\n");
 884                 retStatus = ISD200_ERROR;
 885         } else {
 886                 /* delay 10ms to give the drive a chance to see it */
 887                 msleep(10);
 888
 889                 transferStatus = isd200_action( us, ACTION_REENABLE, NULL, 0 );
 890                 if (transferStatus != ISD200_TRANSPORT_GOOD) {
 891                         US_DEBUGP("   Error taking drive out of reset\n");
 892                         retStatus = ISD200_ERROR;
 893                 } else {
 894                         /* delay 50ms to give the drive a chance to recover after SRST */
 895                         msleep(50);
 896                 }
 897         }
 898
 899         US_DEBUGP("Leaving isd200_srst %08X\n", retStatus);
 900         return retStatus;
 901 }
 902
 903
 904 /**************************************************************************
 905  * isd200_try_enum
 906  *
 907  * Helper function for isd200_manual_enum(). Does ENUM and READ_STATUS
 908  * and tries to analyze the status registers
 909  *
 910  * RETURNS:
 911  *    ISD status code
 912  */
 913 static int isd200_try_enum(struct us_data *us, unsigned char master_slave,
 914                            int detect )
 915 {
 916         int status = ISD200_GOOD;
 917         unsigned long endTime;
 918         struct isd200_info *info = (struct isd200_info *)us->extra;
 919         unsigned char *regs = info->RegsBuf;
 920         int recheckAsMaster = 0;
 921
 922         if ( detect )
 923                 endTime = jiffies + ISD200_ENUM_DETECT_TIMEOUT * HZ;
 924         else
 925                 endTime = jiffies + ISD200_ENUM_BSY_TIMEOUT * HZ;
 926
 927         /* loop until we detect !BSY or timeout */
 928         while(1) {
 929 #ifdef CONFIG_USB_STORAGE_DEBUG
 930                 char* mstr = master_slave == ATA_ADDRESS_DEVHEAD_STD ?
 931                         "Master" : "Slave";
 932 #endif
 933
 934                 status = isd200_action( us, ACTION_ENUM, NULL, master_slave );
 935                 if ( status != ISD200_GOOD )
 936                         break;
 937
 938                 status = isd200_action( us, ACTION_READ_STATUS,
 939                                         regs, 8 );
 940                 if ( status != ISD200_GOOD )
 941                         break;
 942
 943                 if (!detect) {
 944                         if (regs[ATA_REG_STATUS_OFFSET] & ATA_BUSY) {
 945                                 US_DEBUGP("   %s status is still BSY, try again...\n",mstr);
 946                         } else {
 947                                 US_DEBUGP("   %s status !BSY, continue with next operation\n",mstr);
 948                                 break;
 949                         }
 950                 }
 951                 /* check for ATA_BUSY and */
 952                 /* ATA_DF (workaround ATA Zip drive) and */
 953                 /* ATA_ERR (workaround for Archos CD-ROM) */
 954                 else if (regs[ATA_REG_STATUS_OFFSET] &
 955                          (ATA_BUSY | ATA_DF | ATA_ERR)) {
 956                         US_DEBUGP("   Status indicates it is not ready, try again...\n");
 957                 }
 958                 /* check for DRDY, ATA devices set DRDY after SRST */
 959                 else if (regs[ATA_REG_STATUS_OFFSET] & ATA_DRDY) {
 960                         US_DEBUGP("   Identified ATA device\n");
 961                         info->DeviceFlags |= DF_ATA_DEVICE;
 962                         info->DeviceHead = master_slave;
 963                         break;
 964                 }
 965                 /* check Cylinder High/Low to
 966                    determine if it is an ATAPI device
 967                 */
 968                 else if (regs[ATA_REG_HCYL_OFFSET] == 0xEB &&
 969                          regs[ATA_REG_LCYL_OFFSET] == 0x14) {
 970                         /* It seems that the RICOH
 971                            MP6200A CD/RW drive will
 972                            report itself okay as a
 973                            slave when it is really a
 974                            master. So this check again
 975                            as a master device just to
 976                            make sure it doesn't report
 977                            itself okay as a master also
 978                         */
 979                         if ((master_slave & ATA_ADDRESS_DEVHEAD_SLAVE) &&
 980                             !recheckAsMaster) {
 981                                 US_DEBUGP("   Identified ATAPI device as slave.  Rechecking again as master\n");
 982                                 recheckAsMaster = 1;
 983                                 master_slave = ATA_ADDRESS_DEVHEAD_STD;
 984                         } else {
 985                                 US_DEBUGP("   Identified ATAPI device\n");
 986                                 info->DeviceHead = master_slave;
 987
 988                                 status = isd200_atapi_soft_reset(us);
 989                                 break;
 990                         }
 991                 } else {
 992                         US_DEBUGP("   Not ATA, not ATAPI. Weird.\n");
 993                         break;
 994                 }
 995
 996                 /* check for timeout on this request */
 997                 if (time_after_eq(jiffies, endTime)) {
 998                         if (!detect)
 999                                 US_DEBUGP("   BSY check timeout, just continue with next operation...\n");
1000                         else
1001                                 US_DEBUGP("   Device detect timeout!\n");
1002                         break;
1003                 }
1004         }
1005
1006         return status;
1007 }
1008
1009 /**************************************************************************
1010  * isd200_manual_enum
1011  *
1012  * Determines if the drive attached is an ATA or ATAPI and if it is a
1013  * master or slave.
1014  *
1015  * RETURNS:
1016  *    ISD status code
1017  */
1018 static int isd200_manual_enum(struct us_data *us)
1019 {
1020         struct isd200_info *info = (struct isd200_info *)us->extra;
1021         int retStatus = ISD200_GOOD;
1022
1023         US_DEBUGP("Entering isd200_manual_enum\n");
1024
1025         retStatus = isd200_read_config(us);
1026         if (retStatus == ISD200_GOOD) {
1027                 int isslave;
1028                 /* master or slave? */
1029                 retStatus = isd200_try_enum( us, ATA_ADDRESS_DEVHEAD_STD, 0);
1030                 if (retStatus == ISD200_GOOD)
1031                         retStatus = isd200_try_enum( us, ATA_ADDRESS_DEVHEAD_SLAVE, 0);
1032
1033                 if (retStatus == ISD200_GOOD) {
1034                         retStatus = isd200_srst(us);
1035                         if (retStatus == ISD200_GOOD)
1036                                 /* ata or atapi? */
1037                                 retStatus = isd200_try_enum( us, ATA_ADDRESS_DEVHEAD_STD, 1);
1038                 }
1039
1040                 isslave = (info->DeviceHead & ATA_ADDRESS_DEVHEAD_SLAVE) ? 1 : 0;
1041                 if (!(info->ConfigData.ATAConfig & ATACFG_MASTER)) {
1042                         US_DEBUGP("   Setting Master/Slave selection to %d\n", isslave);
1043                         info->ConfigData.ATAConfig &= 0x3f;
1044                         info->ConfigData.ATAConfig |= (isslave<<6);
1045                         retStatus = isd200_write_config(us);
1046                 }
1047         }
1048
1049         US_DEBUGP("Leaving isd200_manual_enum %08X\n", retStatus);
1050         return(retStatus);
1051 }
1052
1053 static void isd200_fix_driveid(u16 *id)
1054 {
1055 #ifndef __LITTLE_ENDIAN
1056 # ifdef __BIG_ENDIAN
1057         int i;
1058
1059         for (i = 0; i < ATA_ID_WORDS; i++)
1060                 id[i] = __le16_to_cpu(id[i]);
1061 # else
1062 #  error "Please fix <asm/byteorder.h>"
1063 # endif
1064 #endif
1065 }
1066
1067 static void isd200_dump_driveid(u16 *id)
1068 {
1069         US_DEBUGP("   Identify Data Structure:\n");
1070         US_DEBUGP("      config = 0x%x\n",        id[ATA_ID_CONFIG]);
1071         US_DEBUGP("      cyls = 0x%x\n",          id[ATA_ID_CYLS]);
1072         US_DEBUGP("      heads = 0x%x\n",         id[ATA_ID_HEADS]);
1073         US_DEBUGP("      track_bytes = 0x%x\n",   id[4]);
1074         US_DEBUGP("      sector_bytes = 0x%x\n",  id[5]);
1075         US_DEBUGP("      sectors = 0x%x\n",       id[ATA_ID_SECTORS]);
1076         US_DEBUGP("      serial_no[0] = 0x%x\n",  *(char *)&id[ATA_ID_SERNO]);
1077         US_DEBUGP("      buf_type = 0x%x\n",      id[20]);
1078         US_DEBUGP("      buf_size = 0x%x\n",      id[ATA_ID_BUF_SIZE]);
1079         US_DEBUGP("      ecc_bytes = 0x%x\n",     id[22]);
1080         US_DEBUGP("      fw_rev[0] = 0x%x\n",     *(char *)&id[ATA_ID_FW_REV]);
1081         US_DEBUGP("      model[0] = 0x%x\n",      *(char *)&id[ATA_ID_PROD]);
1082         US_DEBUGP("      max_multsect = 0x%x\n",  id[ATA_ID_MAX_MULTSECT] & 0xff);
1083         US_DEBUGP("      dword_io = 0x%x\n",      id[ATA_ID_DWORD_IO]);
1084         US_DEBUGP("      capability = 0x%x\n",    id[ATA_ID_CAPABILITY] >> 8);
1085         US_DEBUGP("      tPIO = 0x%x\n",          id[ATA_ID_OLD_PIO_MODES] >> 8);
1086         US_DEBUGP("      tDMA = 0x%x\n",          id[ATA_ID_OLD_DMA_MODES] >> 8);
1087         US_DEBUGP("      field_valid = 0x%x\n",   id[ATA_ID_FIELD_VALID]);
1088         US_DEBUGP("      cur_cyls = 0x%x\n",      id[ATA_ID_CUR_CYLS]);
1089         US_DEBUGP("      cur_heads = 0x%x\n",     id[ATA_ID_CUR_HEADS]);
1090         US_DEBUGP("      cur_sectors = 0x%x\n",   id[ATA_ID_CUR_SECTORS]);
1091         US_DEBUGP("      cur_capacity = 0x%x\n",  ata_id_u32(id, 57));
1092         US_DEBUGP("      multsect = 0x%x\n",      id[ATA_ID_MULTSECT] & 0xff);
1093         US_DEBUGP("      lba_capacity = 0x%x\n",  ata_id_u32(id, ATA_ID_LBA_CAPACITY));
1094         US_DEBUGP("      command_set_1 = 0x%x\n", id[ATA_ID_COMMAND_SET_1]);
1095         US_DEBUGP("      command_set_2 = 0x%x\n", id[ATA_ID_COMMAND_SET_2]);
1096 }
1097
1098 /**************************************************************************
1099  * isd200_get_inquiry_data
1100  *
1101  * Get inquiry data
1102  *
1103  * RETURNS:
1104  *    ISD status code
1105  */
1106 static int isd200_get_inquiry_data( struct us_data *us )
1107 {
1108         struct isd200_info *info = (struct isd200_info *)us->extra;
1109         int retStatus = ISD200_GOOD;
1110         u16 *id = info->id;
1111
1112         US_DEBUGP("Entering isd200_get_inquiry_data\n");
1113
1114         /* set default to Master */
1115         info->DeviceHead = ATA_ADDRESS_DEVHEAD_STD;
1116
1117         /* attempt to manually enumerate this device */
1118         retStatus = isd200_manual_enum(us);
1119         if (retStatus == ISD200_GOOD) {
1120                 int transferStatus;
1121
1122                 /* check for an ATA device */
1123                 if (info->DeviceFlags & DF_ATA_DEVICE) {
1124                         /* this must be an ATA device */
1125                         /* perform an ATA Command Identify */
1126                         transferStatus = isd200_action( us, ACTION_IDENTIFY,
1127                                                         id, ATA_ID_WORDS * 2);
1128                         if (transferStatus != ISD200_TRANSPORT_GOOD) {
1129                                 /* Error issuing ATA Command Identify */
1130                                 US_DEBUGP("   Error issuing ATA Command Identify\n");
1131                                 retStatus = ISD200_ERROR;
1132                         } else {
1133                                 /* ATA Command Identify successful */
1134                                 int i;
1135                                 __be16 *src;
1136                                 __u16 *dest;
1137
1138                                 isd200_fix_driveid(id);
1139                                 isd200_dump_driveid(id);
1140
1141                                 memset(&info->InquiryData, 0, sizeof(info->InquiryData));
1142
1143                                 /* Standard IDE interface only supports disks */
1144                                 info->InquiryData.DeviceType = DIRECT_ACCESS_DEVICE;
1145
1146                                 /* The length must be at least 36 (5 + 31) */
1147                                 info->InquiryData.AdditionalLength = 0x1F;
1148
1149                                 if (id[ATA_ID_COMMAND_SET_1] & COMMANDSET_MEDIA_STATUS) {
1150                                         /* set the removable bit */
1151                                         info->InquiryData.DeviceTypeModifier = DEVICE_REMOVABLE;
1152                                         info->DeviceFlags |= DF_REMOVABLE_MEDIA;
1153                                 }
1154
1155                                 /* Fill in vendor identification fields */
1156                                 src = (__be16 *)&id[ATA_ID_PROD];
1157                                 dest = (__u16*)info->InquiryData.VendorId;
1158                                 for (i=0;i<4;i++)
1159                                         dest[i] = be16_to_cpu(src[i]);
1160
1161                                 src = (__be16 *)&id[ATA_ID_PROD + 8/2];
1162                                 dest = (__u16*)info->InquiryData.ProductId;
1163                                 for (i=0;i<8;i++)
1164                                         dest[i] = be16_to_cpu(src[i]);
1165
1166                                 src = (__be16 *)&id[ATA_ID_FW_REV];
1167                                 dest = (__u16*)info->InquiryData.ProductRevisionLevel;
1168                                 for (i=0;i<2;i++)
1169                                         dest[i] = be16_to_cpu(src[i]);
1170
1171                                 /* determine if it supports Media Status Notification */
1172                                 if (id[ATA_ID_COMMAND_SET_2] & COMMANDSET_MEDIA_STATUS) {
1173                                         US_DEBUGP("   Device supports Media Status Notification\n");
1174
1175                                         /* Indicate that it is enabled, even though it is not
1176                                          * This allows the lock/unlock of the media to work
1177                                          * correctly.
1178                                          */
1179                                         info->DeviceFlags |= DF_MEDIA_STATUS_ENABLED;
1180                                 }
1181                                 else
1182                                         info->DeviceFlags &= ~DF_MEDIA_STATUS_ENABLED;
1183
1184                         }
1185                 } else {
1186                         /*
1187                          * this must be an ATAPI device
1188                          * use an ATAPI protocol (Transparent SCSI)
1189                          */
1190                         us->protocol_name = "Transparent SCSI";
1191                         us->proto_handler = usb_stor_transparent_scsi_command;
1192
1193                         US_DEBUGP("Protocol changed to: %s\n", us->protocol_name);
1194
1195                         /* Free driver structure */
1196                         us->extra_destructor(info);
1197                         kfree(info);
1198                         us->extra = NULL;
1199                         us->extra_destructor = NULL;
1200                 }
1201         }
1202
1203         US_DEBUGP("Leaving isd200_get_inquiry_data %08X\n", retStatus);
1204
1205         return(retStatus);
1206 }
1207
1208 /**************************************************************************
1209  * isd200_scsi_to_ata
1210  *
1211  * Translate SCSI commands to ATA commands.
1212  *
1213  * RETURNS:
1214  *    1 if the command needs to be sent to the transport layer
1215  *    0 otherwise
1216  */
1217 static int isd200_scsi_to_ata(struct scsi_cmnd *srb, struct us_data *us,
1218                               union ata_cdb * ataCdb)
1219 {
1220         struct isd200_info *info = (struct isd200_info *)us->extra;
1221         u16 *id = info->id;
1222         int sendToTransport = 1;
1223         unsigned char sectnum, head;
1224         unsigned short cylinder;
1225         unsigned long lba;
1226         unsigned long blockCount;
1227         unsigned char senseData[8] = { 0, 0, 0, 0, 0, 0, 0, 0 };
1228
1229         memset(ataCdb, 0, sizeof(union ata_cdb));
1230
1231         /* SCSI Command */
1232         switch (srb->cmnd[0]) {
1233         case INQUIRY:
1234                 US_DEBUGP("   ATA OUT - INQUIRY\n");
1235
1236                 /* copy InquiryData */
1237                 usb_stor_set_xfer_buf((unsigned char *) &info->InquiryData,
1238                                 sizeof(info->InquiryData), srb);
1239                 srb->result = SAM_STAT_GOOD;
1240                 sendToTransport = 0;
1241                 break;
1242
1243         case MODE_SENSE:
1244                 US_DEBUGP("   ATA OUT - SCSIOP_MODE_SENSE\n");
1245
1246                 /* Initialize the return buffer */
1247                 usb_stor_set_xfer_buf(senseData, sizeof(senseData), srb);
1248
1249                 if (info->DeviceFlags & DF_MEDIA_STATUS_ENABLED)
1250                 {
1251                         ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand;
1252                         ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand;
1253                         ataCdb->generic.TransferBlockSize = 1;
1254                         ataCdb->generic.RegisterSelect = REG_COMMAND;
1255                         ataCdb->write.CommandByte = ATA_COMMAND_GET_MEDIA_STATUS;
1256                         isd200_srb_set_bufflen(srb, 0);
1257                 } else {
1258                         US_DEBUGP("   Media Status not supported, just report okay\n");
1259                         srb->result = SAM_STAT_GOOD;
1260                         sendToTransport = 0;
1261                 }
1262                 break;
1263
1264         case TEST_UNIT_READY:
1265                 US_DEBUGP("   ATA OUT - SCSIOP_TEST_UNIT_READY\n");
1266
1267                 if (info->DeviceFlags & DF_MEDIA_STATUS_ENABLED)
1268                 {
1269                         ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand;
1270                         ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand;
1271                         ataCdb->generic.TransferBlockSize = 1;
1272                         ataCdb->generic.RegisterSelect = REG_COMMAND;
1273                         ataCdb->write.CommandByte = ATA_COMMAND_GET_MEDIA_STATUS;
1274                         isd200_srb_set_bufflen(srb, 0);
1275                 } else {
1276                         US_DEBUGP("   Media Status not supported, just report okay\n");
1277                         srb->result = SAM_STAT_GOOD;
1278                         sendToTransport = 0;
1279                 }
1280                 break;
1281
1282         case READ_CAPACITY:
1283         {
1284                 unsigned long capacity;
1285                 struct read_capacity_data readCapacityData;
1286
1287                 US_DEBUGP("   ATA OUT - SCSIOP_READ_CAPACITY\n");
1288
1289                 if (ata_id_has_lba(id))
1290                         capacity = ata_id_u32(id, ATA_ID_LBA_CAPACITY) - 1;
1291                 else
1292                         capacity = (id[ATA_ID_HEADS] * id[ATA_ID_CYLS] *
1293                                     id[ATA_ID_SECTORS]) - 1;
1294
1295                 readCapacityData.LogicalBlockAddress = cpu_to_be32(capacity);
1296                 readCapacityData.BytesPerBlock = cpu_to_be32(0x200);
1297
1298                 usb_stor_set_xfer_buf((unsigned char *) &readCapacityData,
1299                                 sizeof(readCapacityData), srb);
1300                 srb->result = SAM_STAT_GOOD;
1301                 sendToTransport = 0;
1302         }
1303         break;
1304
1305         case READ_10:
1306                 US_DEBUGP("   ATA OUT - SCSIOP_READ\n");
1307
1308                 lba = be32_to_cpu(*(__be32 *)&srb->cmnd[2]);
1309                 blockCount = (unsigned long)srb->cmnd[7]<<8 | (unsigned long)srb->cmnd[8];
1310
1311                 if (ata_id_has_lba(id)) {
1312                         sectnum = (unsigned char)(lba);
1313                         cylinder = (unsigned short)(lba>>8);
1314                         head = ATA_ADDRESS_DEVHEAD_LBA_MODE | (unsigned char)(lba>>24 & 0x0F);
1315                 } else {
1316                         sectnum = (u8)((lba % id[ATA_ID_SECTORS]) + 1);
1317                         cylinder = (u16)(lba / (id[ATA_ID_SECTORS] *
1318                                         id[ATA_ID_HEADS]));
1319                         head = (u8)((lba / id[ATA_ID_SECTORS]) %
1320                                         id[ATA_ID_HEADS]);
1321                 }
1322                 ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand;
1323                 ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand;
1324                 ataCdb->generic.TransferBlockSize = 1;
1325                 ataCdb->generic.RegisterSelect =
1326                   REG_SECTOR_COUNT | REG_SECTOR_NUMBER |
1327                   REG_CYLINDER_LOW | REG_CYLINDER_HIGH |
1328                   REG_DEVICE_HEAD  | REG_COMMAND;
1329                 ataCdb->write.SectorCountByte = (unsigned char)blockCount;
1330                 ataCdb->write.SectorNumberByte = sectnum;
1331                 ataCdb->write.CylinderHighByte = (unsigned char)(cylinder>>8);
1332                 ataCdb->write.CylinderLowByte = (unsigned char)cylinder;
1333                 ataCdb->write.DeviceHeadByte = (head | ATA_ADDRESS_DEVHEAD_STD);
1334                 ataCdb->write.CommandByte = ATA_CMD_PIO_READ;
1335                 break;
1336
1337         case WRITE_10:
1338                 US_DEBUGP("   ATA OUT - SCSIOP_WRITE\n");
1339
1340                 lba = be32_to_cpu(*(__be32 *)&srb->cmnd[2]);
1341                 blockCount = (unsigned long)srb->cmnd[7]<<8 | (unsigned long)srb->cmnd[8];
1342
1343                 if (ata_id_has_lba(id)) {
1344                         sectnum = (unsigned char)(lba);
1345                         cylinder = (unsigned short)(lba>>8);
1346                         head = ATA_ADDRESS_DEVHEAD_LBA_MODE | (unsigned char)(lba>>24 & 0x0F);
1347                 } else {
1348                         sectnum = (u8)((lba % id[ATA_ID_SECTORS]) + 1);
1349                         cylinder = (u16)(lba / (id[ATA_ID_SECTORS] *
1350                                         id[ATA_ID_HEADS]));
1351                         head = (u8)((lba / id[ATA_ID_SECTORS]) %
1352                                         id[ATA_ID_HEADS]);
1353                 }
1354                 ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand;
1355                 ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand;
1356                 ataCdb->generic.TransferBlockSize = 1;
1357                 ataCdb->generic.RegisterSelect =
1358                   REG_SECTOR_COUNT | REG_SECTOR_NUMBER |
1359                   REG_CYLINDER_LOW | REG_CYLINDER_HIGH |
1360                   REG_DEVICE_HEAD  | REG_COMMAND;
1361                 ataCdb->write.SectorCountByte = (unsigned char)blockCount;
1362                 ataCdb->write.SectorNumberByte = sectnum;
1363                 ataCdb->write.CylinderHighByte = (unsigned char)(cylinder>>8);
1364                 ataCdb->write.CylinderLowByte = (unsigned char)cylinder;
1365                 ataCdb->write.DeviceHeadByte = (head | ATA_ADDRESS_DEVHEAD_STD);
1366                 ataCdb->write.CommandByte = ATA_CMD_PIO_WRITE;
1367                 break;
1368
1369         case ALLOW_MEDIUM_REMOVAL:
1370                 US_DEBUGP("   ATA OUT - SCSIOP_MEDIUM_REMOVAL\n");
1371
1372                 if (info->DeviceFlags & DF_REMOVABLE_MEDIA) {
1373                         US_DEBUGP("   srb->cmnd[4] = 0x%X\n", srb->cmnd[4]);
1374
1375                         ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand;
1376                         ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand;
1377                         ataCdb->generic.TransferBlockSize = 1;
1378                         ataCdb->generic.RegisterSelect = REG_COMMAND;
1379                         ataCdb->write.CommandByte = (srb->cmnd[4] & 0x1) ?
1380                                 ATA_CMD_MEDIA_LOCK : ATA_CMD_MEDIA_UNLOCK;
1381                         isd200_srb_set_bufflen(srb, 0);
1382                 } else {
1383                         US_DEBUGP("   Not removeable media, just report okay\n");
1384                         srb->result = SAM_STAT_GOOD;
1385                         sendToTransport = 0;
1386                 }
1387                 break;
1388
1389         case START_STOP:
1390                 US_DEBUGP("   ATA OUT - SCSIOP_START_STOP_UNIT\n");
1391                 US_DEBUGP("   srb->cmnd[4] = 0x%X\n", srb->cmnd[4]);
1392
1393                 if ((srb->cmnd[4] & 0x3) == 0x2) {
1394                         US_DEBUGP("   Media Eject\n");
1395                         ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand;
1396                         ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand;
1397                         ataCdb->generic.TransferBlockSize = 0;
1398                         ataCdb->generic.RegisterSelect = REG_COMMAND;
1399                         ataCdb->write.CommandByte = ATA_COMMAND_MEDIA_EJECT;
1400                 } else if ((srb->cmnd[4] & 0x3) == 0x1) {
1401                         US_DEBUGP("   Get Media Status\n");
1402                         ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand;
1403                         ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand;
1404                         ataCdb->generic.TransferBlockSize = 1;
1405                         ataCdb->generic.RegisterSelect = REG_COMMAND;
1406                         ataCdb->write.CommandByte = ATA_COMMAND_GET_MEDIA_STATUS;
1407                         isd200_srb_set_bufflen(srb, 0);
1408                 } else {
1409                         US_DEBUGP("   Nothing to do, just report okay\n");
1410                         srb->result = SAM_STAT_GOOD;
1411                         sendToTransport = 0;
1412                 }
1413                 break;
1414
1415         default:
1416                 US_DEBUGP("Unsupported SCSI command - 0x%X\n", srb->cmnd[0]);
1417                 srb->result = DID_ERROR << 16;
1418                 sendToTransport = 0;
1419                 break;
1420         }
1421
1422         return(sendToTransport);
1423 }
1424
1425
1426 /**************************************************************************
1427  * isd200_free_info
1428  *
1429  * Frees the driver structure.
1430  */
1431 static void isd200_free_info_ptrs(void *info_)
1432 {
1433         struct isd200_info *info = (struct isd200_info *) info_;
1434
1435         if (info) {
1436                 kfree(info->id);
1437                 kfree(info->RegsBuf);
1438                 kfree(info->srb.sense_buffer);
1439         }
1440 }
1441
1442 /**************************************************************************
1443  * isd200_init_info
1444  *
1445  * Allocates (if necessary) and initializes the driver structure.
1446  *
1447  * RETURNS:
1448  *    ISD status code
1449  */
1450 static int isd200_init_info(struct us_data *us)
1451 {
1452         int retStatus = ISD200_GOOD;
1453         struct isd200_info *info;
1454
1455         info = kzalloc(sizeof(struct isd200_info), GFP_KERNEL);
1456         if (!info)
1457                 retStatus = ISD200_ERROR;
1458         else {
1459                 info->id = kzalloc(ATA_ID_WORDS * 2, GFP_KERNEL);
1460                 info->RegsBuf = (unsigned char *)
1461                                 kmalloc(sizeof(info->ATARegs), GFP_KERNEL);
1462                 info->srb.sense_buffer =
1463                                 kmalloc(SCSI_SENSE_BUFFERSIZE, GFP_KERNEL);
1464                 if (!info->id || !info->RegsBuf || !info->srb.sense_buffer) {
1465                         isd200_free_info_ptrs(info);
1466                         kfree(info);
1467                         retStatus = ISD200_ERROR;
1468                 }
1469         }
1470
1471         if (retStatus == ISD200_GOOD) {
1472                 us->extra = info;
1473                 us->extra_destructor = isd200_free_info_ptrs;
1474         } else
1475                 US_DEBUGP("ERROR - kmalloc failure\n");
1476
1477         return retStatus;
1478 }
1479
1480 /**************************************************************************
1481  * Initialization for the ISD200
1482  */
1483
1484 static int isd200_Initialization(struct us_data *us)
1485 {
1486         US_DEBUGP("ISD200 Initialization...\n");
1487
1488         /* Initialize ISD200 info struct */
1489
1490         if (isd200_init_info(us) == ISD200_ERROR) {
1491                 US_DEBUGP("ERROR Initializing ISD200 Info struct\n");
1492         } else {
1493                 /* Get device specific data */
1494
1495                 if (isd200_get_inquiry_data(us) != ISD200_GOOD)
1496                         US_DEBUGP("ISD200 Initialization Failure\n");
1497                 else
1498                         US_DEBUGP("ISD200 Initialization complete\n");
1499         }
1500
1501         return 0;
1502 }
1503
1504
1505 /**************************************************************************
1506  * Protocol and Transport for the ISD200 ASIC
1507  *
1508  * This protocol and transport are for ATA devices connected to an ISD200
1509  * ASIC.  An ATAPI device that is connected as a slave device will be
1510  * detected in the driver initialization function and the protocol will
1511  * be changed to an ATAPI protocol (Transparent SCSI).
1512  *
1513  */
1514
1515 static void isd200_ata_command(struct scsi_cmnd *srb, struct us_data *us)
1516 {
1517         int sendToTransport = 1, orig_bufflen;
1518         union ata_cdb ataCdb;
1519
1520         /* Make sure driver was initialized */
1521
1522         if (us->extra == NULL)
1523                 US_DEBUGP("ERROR Driver not initialized\n");
1524
1525         scsi_set_resid(srb, 0);
1526         /* scsi_bufflen might change in protocol translation to ata */
1527         orig_bufflen = scsi_bufflen(srb);
1528         sendToTransport = isd200_scsi_to_ata(srb, us, &ataCdb);
1529
1530         /* send the command to the transport layer */
1531         if (sendToTransport)
1532                 isd200_invoke_transport(us, srb, &ataCdb);
1533
1534         isd200_srb_set_bufflen(srb, orig_bufflen);
1535 }
1536
1537 static int isd200_probe(struct usb_interface *intf,
1538                          const struct usb_device_id *id)
1539 {
1540         struct us_data *us;
1541         int result;
1542
1543         result = usb_stor_probe1(&us, intf, id,
1544                         (id - isd200_usb_ids) + isd200_unusual_dev_list);
1545         if (result)
1546                 return result;
1547
1548         us->protocol_name = "ISD200 ATA/ATAPI";
1549         us->proto_handler = isd200_ata_command;
1550
1551         result = usb_stor_probe2(us);
1552         return result;
1553 }
1554
1555 static struct usb_driver isd200_driver = {
1556         .name =         "ums-isd200",
1557         .probe =        isd200_probe,
1558         .disconnect =   usb_stor_disconnect,
1559         .suspend =      usb_stor_suspend,
1560         .resume =       usb_stor_resume,
1561         .reset_resume = usb_stor_reset_resume,
1562         .pre_reset =    usb_stor_pre_reset,
1563         .post_reset =   usb_stor_post_reset,
1564         .id_table =     isd200_usb_ids,
1565         .soft_unbind =  1,
1566         .no_dynamic_id = 1,
1567 };
1568
1569 module_usb_driver(isd200_driver);