]> Git Repo - linux.git/blob - drivers/gpio/gpio-pca953x.c
Merge tag 'ti-k3-dt-for-v6.11-part2' into ti-k3-dts-next
[linux.git] / drivers / gpio / gpio-pca953x.c
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  *  PCA953x 4/8/16/24/40 bit I/O ports
4  *
5  *  Copyright (C) 2005 Ben Gardner <[email protected]>
6  *  Copyright (C) 2007 Marvell International Ltd.
7  *
8  *  Derived from drivers/i2c/chips/pca9539.c
9  */
10
11 #include <linux/atomic.h>
12 #include <linux/bitmap.h>
13 #include <linux/cleanup.h>
14 #include <linux/device.h>
15 #include <linux/errno.h>
16 #include <linux/i2c.h>
17 #include <linux/init.h>
18 #include <linux/interrupt.h>
19 #include <linux/irq.h>
20 #include <linux/mod_devicetable.h>
21 #include <linux/module.h>
22 #include <linux/mutex.h>
23 #include <linux/pm.h>
24 #include <linux/regmap.h>
25 #include <linux/regulator/consumer.h>
26 #include <linux/seq_file.h>
27 #include <linux/slab.h>
28
29 #include <linux/gpio/consumer.h>
30 #include <linux/gpio/driver.h>
31
32 #include <linux/pinctrl/pinconf-generic.h>
33
34 #include <linux/platform_data/pca953x.h>
35
36 #define PCA953X_INPUT           0x00
37 #define PCA953X_OUTPUT          0x01
38 #define PCA953X_INVERT          0x02
39 #define PCA953X_DIRECTION       0x03
40
41 #define REG_ADDR_MASK           GENMASK(5, 0)
42 #define REG_ADDR_EXT            BIT(6)
43 #define REG_ADDR_AI             BIT(7)
44
45 #define PCA957X_IN              0x00
46 #define PCA957X_INVRT           0x01
47 #define PCA957X_BKEN            0x02
48 #define PCA957X_PUPD            0x03
49 #define PCA957X_CFG             0x04
50 #define PCA957X_OUT             0x05
51 #define PCA957X_MSK             0x06
52 #define PCA957X_INTS            0x07
53
54 #define PCAL953X_OUT_STRENGTH   0x20
55 #define PCAL953X_IN_LATCH       0x22
56 #define PCAL953X_PULL_EN        0x23
57 #define PCAL953X_PULL_SEL       0x24
58 #define PCAL953X_INT_MASK       0x25
59 #define PCAL953X_INT_STAT       0x26
60 #define PCAL953X_OUT_CONF       0x27
61
62 #define PCAL6524_INT_EDGE       0x28
63 #define PCAL6524_INT_CLR        0x2a
64 #define PCAL6524_IN_STATUS      0x2b
65 #define PCAL6524_OUT_INDCONF    0x2c
66 #define PCAL6524_DEBOUNCE       0x2d
67
68 #define PCA_GPIO_MASK           GENMASK(7, 0)
69
70 #define PCAL_GPIO_MASK          GENMASK(4, 0)
71 #define PCAL_PINCTRL_MASK       GENMASK(6, 5)
72
73 #define PCA_INT                 BIT(8)
74 #define PCA_PCAL                BIT(9)
75 #define PCA_LATCH_INT           (PCA_PCAL | PCA_INT)
76 #define PCA953X_TYPE            BIT(12)
77 #define PCA957X_TYPE            BIT(13)
78 #define PCAL653X_TYPE           BIT(14)
79 #define PCA_TYPE_MASK           GENMASK(15, 12)
80
81 #define PCA_CHIP_TYPE(x)        ((x) & PCA_TYPE_MASK)
82
83 static const struct i2c_device_id pca953x_id[] = {
84         { "pca6408", 8  | PCA953X_TYPE | PCA_INT, },
85         { "pca6416", 16 | PCA953X_TYPE | PCA_INT, },
86         { "pca9505", 40 | PCA953X_TYPE | PCA_INT, },
87         { "pca9506", 40 | PCA953X_TYPE | PCA_INT, },
88         { "pca9534", 8  | PCA953X_TYPE | PCA_INT, },
89         { "pca9535", 16 | PCA953X_TYPE | PCA_INT, },
90         { "pca9536", 4  | PCA953X_TYPE, },
91         { "pca9537", 4  | PCA953X_TYPE | PCA_INT, },
92         { "pca9538", 8  | PCA953X_TYPE | PCA_INT, },
93         { "pca9539", 16 | PCA953X_TYPE | PCA_INT, },
94         { "pca9554", 8  | PCA953X_TYPE | PCA_INT, },
95         { "pca9555", 16 | PCA953X_TYPE | PCA_INT, },
96         { "pca9556", 8  | PCA953X_TYPE, },
97         { "pca9557", 8  | PCA953X_TYPE, },
98         { "pca9574", 8  | PCA957X_TYPE | PCA_INT, },
99         { "pca9575", 16 | PCA957X_TYPE | PCA_INT, },
100         { "pca9698", 40 | PCA953X_TYPE, },
101
102         { "pcal6408", 8 | PCA953X_TYPE | PCA_LATCH_INT, },
103         { "pcal6416", 16 | PCA953X_TYPE | PCA_LATCH_INT, },
104         { "pcal6524", 24 | PCA953X_TYPE | PCA_LATCH_INT, },
105         { "pcal6534", 34 | PCAL653X_TYPE | PCA_LATCH_INT, },
106         { "pcal9535", 16 | PCA953X_TYPE | PCA_LATCH_INT, },
107         { "pcal9554b", 8  | PCA953X_TYPE | PCA_LATCH_INT, },
108         { "pcal9555a", 16 | PCA953X_TYPE | PCA_LATCH_INT, },
109
110         { "max7310", 8  | PCA953X_TYPE, },
111         { "max7312", 16 | PCA953X_TYPE | PCA_INT, },
112         { "max7313", 16 | PCA953X_TYPE | PCA_INT, },
113         { "max7315", 8  | PCA953X_TYPE | PCA_INT, },
114         { "max7318", 16 | PCA953X_TYPE | PCA_INT, },
115         { "pca6107", 8  | PCA953X_TYPE | PCA_INT, },
116         { "tca6408", 8  | PCA953X_TYPE | PCA_INT, },
117         { "tca6416", 16 | PCA953X_TYPE | PCA_INT, },
118         { "tca6424", 24 | PCA953X_TYPE | PCA_INT, },
119         { "tca9538", 8  | PCA953X_TYPE | PCA_INT, },
120         { "tca9539", 16 | PCA953X_TYPE | PCA_INT, },
121         { "tca9554", 8  | PCA953X_TYPE | PCA_INT, },
122         { "xra1202", 8  | PCA953X_TYPE },
123         { }
124 };
125 MODULE_DEVICE_TABLE(i2c, pca953x_id);
126
127 #ifdef CONFIG_GPIO_PCA953X_IRQ
128
129 #include <linux/acpi.h>
130 #include <linux/dmi.h>
131
132 static const struct acpi_gpio_params pca953x_irq_gpios = { 0, 0, true };
133
134 static const struct acpi_gpio_mapping pca953x_acpi_irq_gpios[] = {
135         { "irq-gpios", &pca953x_irq_gpios, 1, ACPI_GPIO_QUIRK_ABSOLUTE_NUMBER },
136         { }
137 };
138
139 static int pca953x_acpi_get_irq(struct device *dev)
140 {
141         int ret;
142
143         ret = devm_acpi_dev_add_driver_gpios(dev, pca953x_acpi_irq_gpios);
144         if (ret)
145                 dev_warn(dev, "can't add GPIO ACPI mapping\n");
146
147         ret = acpi_dev_gpio_irq_get_by(ACPI_COMPANION(dev), "irq", 0);
148         if (ret < 0)
149                 return ret;
150
151         dev_info(dev, "ACPI interrupt quirk (IRQ %d)\n", ret);
152         return ret;
153 }
154
155 static const struct dmi_system_id pca953x_dmi_acpi_irq_info[] = {
156         {
157                 /*
158                  * On Intel Galileo Gen 2 board the IRQ pin of one of
159                  * the I²C GPIO expanders, which has GpioInt() resource,
160                  * is provided as an absolute number instead of being
161                  * relative. Since first controller (gpio-sch.c) and
162                  * second (gpio-dwapb.c) are at the fixed bases, we may
163                  * safely refer to the number in the global space to get
164                  * an IRQ out of it.
165                  */
166                 .matches = {
167                         DMI_EXACT_MATCH(DMI_BOARD_NAME, "GalileoGen2"),
168                 },
169         },
170         {}
171 };
172 #endif
173
174 static const struct acpi_device_id pca953x_acpi_ids[] = {
175         { "INT3491", 16 | PCA953X_TYPE | PCA_LATCH_INT, },
176         { }
177 };
178 MODULE_DEVICE_TABLE(acpi, pca953x_acpi_ids);
179
180 #define MAX_BANK 5
181 #define BANK_SZ 8
182 #define MAX_LINE        (MAX_BANK * BANK_SZ)
183
184 #define NBANK(chip) DIV_ROUND_UP(chip->gpio_chip.ngpio, BANK_SZ)
185
186 struct pca953x_reg_config {
187         int direction;
188         int output;
189         int input;
190         int invert;
191 };
192
193 static const struct pca953x_reg_config pca953x_regs = {
194         .direction = PCA953X_DIRECTION,
195         .output = PCA953X_OUTPUT,
196         .input = PCA953X_INPUT,
197         .invert = PCA953X_INVERT,
198 };
199
200 static const struct pca953x_reg_config pca957x_regs = {
201         .direction = PCA957X_CFG,
202         .output = PCA957X_OUT,
203         .input = PCA957X_IN,
204         .invert = PCA957X_INVRT,
205 };
206
207 struct pca953x_chip {
208         unsigned gpio_start;
209         struct mutex i2c_lock;
210         struct regmap *regmap;
211
212 #ifdef CONFIG_GPIO_PCA953X_IRQ
213         struct mutex irq_lock;
214         DECLARE_BITMAP(irq_mask, MAX_LINE);
215         DECLARE_BITMAP(irq_stat, MAX_LINE);
216         DECLARE_BITMAP(irq_trig_raise, MAX_LINE);
217         DECLARE_BITMAP(irq_trig_fall, MAX_LINE);
218 #endif
219         atomic_t wakeup_path;
220
221         struct i2c_client *client;
222         struct gpio_chip gpio_chip;
223         unsigned long driver_data;
224         struct regulator *regulator;
225
226         const struct pca953x_reg_config *regs;
227
228         u8 (*recalc_addr)(struct pca953x_chip *chip, int reg, int off);
229         bool (*check_reg)(struct pca953x_chip *chip, unsigned int reg,
230                           u32 checkbank);
231 };
232
233 static int pca953x_bank_shift(struct pca953x_chip *chip)
234 {
235         return fls((chip->gpio_chip.ngpio - 1) / BANK_SZ);
236 }
237
238 #define PCA953x_BANK_INPUT      BIT(0)
239 #define PCA953x_BANK_OUTPUT     BIT(1)
240 #define PCA953x_BANK_POLARITY   BIT(2)
241 #define PCA953x_BANK_CONFIG     BIT(3)
242
243 #define PCA957x_BANK_INPUT      BIT(0)
244 #define PCA957x_BANK_POLARITY   BIT(1)
245 #define PCA957x_BANK_BUSHOLD    BIT(2)
246 #define PCA957x_BANK_CONFIG     BIT(4)
247 #define PCA957x_BANK_OUTPUT     BIT(5)
248
249 #define PCAL9xxx_BANK_IN_LATCH  BIT(8 + 2)
250 #define PCAL9xxx_BANK_PULL_EN   BIT(8 + 3)
251 #define PCAL9xxx_BANK_PULL_SEL  BIT(8 + 4)
252 #define PCAL9xxx_BANK_IRQ_MASK  BIT(8 + 5)
253 #define PCAL9xxx_BANK_IRQ_STAT  BIT(8 + 6)
254
255 /*
256  * We care about the following registers:
257  * - Standard set, below 0x40, each port can be replicated up to 8 times
258  *   - PCA953x standard
259  *     Input port                       0x00 + 0 * bank_size    R
260  *     Output port                      0x00 + 1 * bank_size    RW
261  *     Polarity Inversion port          0x00 + 2 * bank_size    RW
262  *     Configuration port               0x00 + 3 * bank_size    RW
263  *   - PCA957x with mixed up registers
264  *     Input port                       0x00 + 0 * bank_size    R
265  *     Polarity Inversion port          0x00 + 1 * bank_size    RW
266  *     Bus hold port                    0x00 + 2 * bank_size    RW
267  *     Configuration port               0x00 + 4 * bank_size    RW
268  *     Output port                      0x00 + 5 * bank_size    RW
269  *
270  * - Extended set, above 0x40, often chip specific.
271  *   - PCAL6524/PCAL9555A with custom PCAL IRQ handling:
272  *     Input latch register             0x40 + 2 * bank_size    RW
273  *     Pull-up/pull-down enable reg     0x40 + 3 * bank_size    RW
274  *     Pull-up/pull-down select reg     0x40 + 4 * bank_size    RW
275  *     Interrupt mask register          0x40 + 5 * bank_size    RW
276  *     Interrupt status register        0x40 + 6 * bank_size    R
277  *
278  * - Registers with bit 0x80 set, the AI bit
279  *   The bit is cleared and the registers fall into one of the
280  *   categories above.
281  */
282
283 static bool pca953x_check_register(struct pca953x_chip *chip, unsigned int reg,
284                                    u32 checkbank)
285 {
286         int bank_shift = pca953x_bank_shift(chip);
287         int bank = (reg & REG_ADDR_MASK) >> bank_shift;
288         int offset = reg & (BIT(bank_shift) - 1);
289
290         /* Special PCAL extended register check. */
291         if (reg & REG_ADDR_EXT) {
292                 if (!(chip->driver_data & PCA_PCAL))
293                         return false;
294                 bank += 8;
295         }
296
297         /* Register is not in the matching bank. */
298         if (!(BIT(bank) & checkbank))
299                 return false;
300
301         /* Register is not within allowed range of bank. */
302         if (offset >= NBANK(chip))
303                 return false;
304
305         return true;
306 }
307
308 /*
309  * Unfortunately, whilst the PCAL6534 chip (and compatibles) broadly follow the
310  * same register layout as the PCAL6524, the spacing of the registers has been
311  * fundamentally altered by compacting them and thus does not obey the same
312  * rules, including being able to use bit shifting to determine bank. These
313  * chips hence need special handling here.
314  */
315 static bool pcal6534_check_register(struct pca953x_chip *chip, unsigned int reg,
316                                     u32 checkbank)
317 {
318         int bank_shift;
319         int bank;
320         int offset;
321
322         if (reg >= 0x54) {
323                 /*
324                  * Handle lack of reserved registers after output port
325                  * configuration register to form a bank.
326                  */
327                 reg -= 0x54;
328                 bank_shift = 16;
329         } else if (reg >= 0x30) {
330                 /*
331                  * Reserved block between 14h and 2Fh does not align on
332                  * expected bank boundaries like other devices.
333                  */
334                 reg -= 0x30;
335                 bank_shift = 8;
336         } else {
337                 bank_shift = 0;
338         }
339
340         bank = bank_shift + reg / NBANK(chip);
341         offset = reg % NBANK(chip);
342
343         /* Register is not in the matching bank. */
344         if (!(BIT(bank) & checkbank))
345                 return false;
346
347         /* Register is not within allowed range of bank. */
348         if (offset >= NBANK(chip))
349                 return false;
350
351         return true;
352 }
353
354 static bool pca953x_readable_register(struct device *dev, unsigned int reg)
355 {
356         struct pca953x_chip *chip = dev_get_drvdata(dev);
357         u32 bank;
358
359         if (PCA_CHIP_TYPE(chip->driver_data) == PCA957X_TYPE) {
360                 bank = PCA957x_BANK_INPUT | PCA957x_BANK_OUTPUT |
361                        PCA957x_BANK_POLARITY | PCA957x_BANK_CONFIG |
362                        PCA957x_BANK_BUSHOLD;
363         } else {
364                 bank = PCA953x_BANK_INPUT | PCA953x_BANK_OUTPUT |
365                        PCA953x_BANK_POLARITY | PCA953x_BANK_CONFIG;
366         }
367
368         if (chip->driver_data & PCA_PCAL) {
369                 bank |= PCAL9xxx_BANK_IN_LATCH | PCAL9xxx_BANK_PULL_EN |
370                         PCAL9xxx_BANK_PULL_SEL | PCAL9xxx_BANK_IRQ_MASK |
371                         PCAL9xxx_BANK_IRQ_STAT;
372         }
373
374         return chip->check_reg(chip, reg, bank);
375 }
376
377 static bool pca953x_writeable_register(struct device *dev, unsigned int reg)
378 {
379         struct pca953x_chip *chip = dev_get_drvdata(dev);
380         u32 bank;
381
382         if (PCA_CHIP_TYPE(chip->driver_data) == PCA957X_TYPE) {
383                 bank = PCA957x_BANK_OUTPUT | PCA957x_BANK_POLARITY |
384                         PCA957x_BANK_CONFIG | PCA957x_BANK_BUSHOLD;
385         } else {
386                 bank = PCA953x_BANK_OUTPUT | PCA953x_BANK_POLARITY |
387                         PCA953x_BANK_CONFIG;
388         }
389
390         if (chip->driver_data & PCA_PCAL)
391                 bank |= PCAL9xxx_BANK_IN_LATCH | PCAL9xxx_BANK_PULL_EN |
392                         PCAL9xxx_BANK_PULL_SEL | PCAL9xxx_BANK_IRQ_MASK;
393
394         return chip->check_reg(chip, reg, bank);
395 }
396
397 static bool pca953x_volatile_register(struct device *dev, unsigned int reg)
398 {
399         struct pca953x_chip *chip = dev_get_drvdata(dev);
400         u32 bank;
401
402         if (PCA_CHIP_TYPE(chip->driver_data) == PCA957X_TYPE)
403                 bank = PCA957x_BANK_INPUT;
404         else
405                 bank = PCA953x_BANK_INPUT;
406
407         if (chip->driver_data & PCA_PCAL)
408                 bank |= PCAL9xxx_BANK_IRQ_STAT;
409
410         return chip->check_reg(chip, reg, bank);
411 }
412
413 static const struct regmap_config pca953x_i2c_regmap = {
414         .reg_bits = 8,
415         .val_bits = 8,
416
417         .use_single_read = true,
418         .use_single_write = true,
419
420         .readable_reg = pca953x_readable_register,
421         .writeable_reg = pca953x_writeable_register,
422         .volatile_reg = pca953x_volatile_register,
423
424         .disable_locking = true,
425         .cache_type = REGCACHE_MAPLE,
426         .max_register = 0x7f,
427 };
428
429 static const struct regmap_config pca953x_ai_i2c_regmap = {
430         .reg_bits = 8,
431         .val_bits = 8,
432
433         .read_flag_mask = REG_ADDR_AI,
434         .write_flag_mask = REG_ADDR_AI,
435
436         .readable_reg = pca953x_readable_register,
437         .writeable_reg = pca953x_writeable_register,
438         .volatile_reg = pca953x_volatile_register,
439
440         .disable_locking = true,
441         .cache_type = REGCACHE_MAPLE,
442         .max_register = 0x7f,
443 };
444
445 static u8 pca953x_recalc_addr(struct pca953x_chip *chip, int reg, int off)
446 {
447         int bank_shift = pca953x_bank_shift(chip);
448         int addr = (reg & PCAL_GPIO_MASK) << bank_shift;
449         int pinctrl = (reg & PCAL_PINCTRL_MASK) << 1;
450         u8 regaddr = pinctrl | addr | (off / BANK_SZ);
451
452         return regaddr;
453 }
454
455 /*
456  * The PCAL6534 and compatible chips have altered bank alignment that doesn't
457  * fit within the bit shifting scheme used for other devices.
458  */
459 static u8 pcal6534_recalc_addr(struct pca953x_chip *chip, int reg, int off)
460 {
461         int addr;
462         int pinctrl;
463
464         addr = (reg & PCAL_GPIO_MASK) * NBANK(chip);
465
466         switch (reg) {
467         case PCAL953X_OUT_STRENGTH:
468         case PCAL953X_IN_LATCH:
469         case PCAL953X_PULL_EN:
470         case PCAL953X_PULL_SEL:
471         case PCAL953X_INT_MASK:
472         case PCAL953X_INT_STAT:
473                 pinctrl = ((reg & PCAL_PINCTRL_MASK) >> 1) + 0x20;
474                 break;
475         case PCAL6524_INT_EDGE:
476         case PCAL6524_INT_CLR:
477         case PCAL6524_IN_STATUS:
478         case PCAL6524_OUT_INDCONF:
479         case PCAL6524_DEBOUNCE:
480                 pinctrl = ((reg & PCAL_PINCTRL_MASK) >> 1) + 0x1c;
481                 break;
482         default:
483                 pinctrl = 0;
484                 break;
485         }
486
487         return pinctrl + addr + (off / BANK_SZ);
488 }
489
490 static int pca953x_write_regs(struct pca953x_chip *chip, int reg, unsigned long *val)
491 {
492         u8 regaddr = chip->recalc_addr(chip, reg, 0);
493         u8 value[MAX_BANK];
494         int i, ret;
495
496         for (i = 0; i < NBANK(chip); i++)
497                 value[i] = bitmap_get_value8(val, i * BANK_SZ);
498
499         ret = regmap_bulk_write(chip->regmap, regaddr, value, NBANK(chip));
500         if (ret < 0) {
501                 dev_err(&chip->client->dev, "failed writing register\n");
502                 return ret;
503         }
504
505         return 0;
506 }
507
508 static int pca953x_read_regs(struct pca953x_chip *chip, int reg, unsigned long *val)
509 {
510         u8 regaddr = chip->recalc_addr(chip, reg, 0);
511         u8 value[MAX_BANK];
512         int i, ret;
513
514         ret = regmap_bulk_read(chip->regmap, regaddr, value, NBANK(chip));
515         if (ret < 0) {
516                 dev_err(&chip->client->dev, "failed reading register\n");
517                 return ret;
518         }
519
520         for (i = 0; i < NBANK(chip); i++)
521                 bitmap_set_value8(val, value[i], i * BANK_SZ);
522
523         return 0;
524 }
525
526 static int pca953x_gpio_direction_input(struct gpio_chip *gc, unsigned off)
527 {
528         struct pca953x_chip *chip = gpiochip_get_data(gc);
529         u8 dirreg = chip->recalc_addr(chip, chip->regs->direction, off);
530         u8 bit = BIT(off % BANK_SZ);
531
532         guard(mutex)(&chip->i2c_lock);
533
534         return regmap_write_bits(chip->regmap, dirreg, bit, bit);
535 }
536
537 static int pca953x_gpio_direction_output(struct gpio_chip *gc,
538                 unsigned off, int val)
539 {
540         struct pca953x_chip *chip = gpiochip_get_data(gc);
541         u8 dirreg = chip->recalc_addr(chip, chip->regs->direction, off);
542         u8 outreg = chip->recalc_addr(chip, chip->regs->output, off);
543         u8 bit = BIT(off % BANK_SZ);
544         int ret;
545
546         guard(mutex)(&chip->i2c_lock);
547
548         /* set output level */
549         ret = regmap_write_bits(chip->regmap, outreg, bit, val ? bit : 0);
550         if (ret)
551                 return ret;
552
553         /* then direction */
554         return regmap_write_bits(chip->regmap, dirreg, bit, 0);
555 }
556
557 static int pca953x_gpio_get_value(struct gpio_chip *gc, unsigned off)
558 {
559         struct pca953x_chip *chip = gpiochip_get_data(gc);
560         u8 inreg = chip->recalc_addr(chip, chip->regs->input, off);
561         u8 bit = BIT(off % BANK_SZ);
562         u32 reg_val;
563         int ret;
564
565         scoped_guard(mutex, &chip->i2c_lock)
566                 ret = regmap_read(chip->regmap, inreg, &reg_val);
567         if (ret < 0)
568                 return ret;
569
570         return !!(reg_val & bit);
571 }
572
573 static void pca953x_gpio_set_value(struct gpio_chip *gc, unsigned off, int val)
574 {
575         struct pca953x_chip *chip = gpiochip_get_data(gc);
576         u8 outreg = chip->recalc_addr(chip, chip->regs->output, off);
577         u8 bit = BIT(off % BANK_SZ);
578
579         guard(mutex)(&chip->i2c_lock);
580
581         regmap_write_bits(chip->regmap, outreg, bit, val ? bit : 0);
582 }
583
584 static int pca953x_gpio_get_direction(struct gpio_chip *gc, unsigned off)
585 {
586         struct pca953x_chip *chip = gpiochip_get_data(gc);
587         u8 dirreg = chip->recalc_addr(chip, chip->regs->direction, off);
588         u8 bit = BIT(off % BANK_SZ);
589         u32 reg_val;
590         int ret;
591
592         scoped_guard(mutex, &chip->i2c_lock)
593                 ret = regmap_read(chip->regmap, dirreg, &reg_val);
594         if (ret < 0)
595                 return ret;
596
597         if (reg_val & bit)
598                 return GPIO_LINE_DIRECTION_IN;
599
600         return GPIO_LINE_DIRECTION_OUT;
601 }
602
603 static int pca953x_gpio_get_multiple(struct gpio_chip *gc,
604                                      unsigned long *mask, unsigned long *bits)
605 {
606         struct pca953x_chip *chip = gpiochip_get_data(gc);
607         DECLARE_BITMAP(reg_val, MAX_LINE);
608         int ret;
609
610         scoped_guard(mutex, &chip->i2c_lock)
611                 ret = pca953x_read_regs(chip, chip->regs->input, reg_val);
612         if (ret)
613                 return ret;
614
615         bitmap_replace(bits, bits, reg_val, mask, gc->ngpio);
616         return 0;
617 }
618
619 static void pca953x_gpio_set_multiple(struct gpio_chip *gc,
620                                       unsigned long *mask, unsigned long *bits)
621 {
622         struct pca953x_chip *chip = gpiochip_get_data(gc);
623         DECLARE_BITMAP(reg_val, MAX_LINE);
624         int ret;
625
626         guard(mutex)(&chip->i2c_lock);
627
628         ret = pca953x_read_regs(chip, chip->regs->output, reg_val);
629         if (ret)
630                 return;
631
632         bitmap_replace(reg_val, reg_val, bits, mask, gc->ngpio);
633
634         pca953x_write_regs(chip, chip->regs->output, reg_val);
635 }
636
637 static int pca953x_gpio_set_pull_up_down(struct pca953x_chip *chip,
638                                          unsigned int offset,
639                                          unsigned long config)
640 {
641         enum pin_config_param param = pinconf_to_config_param(config);
642         u8 pull_en_reg = chip->recalc_addr(chip, PCAL953X_PULL_EN, offset);
643         u8 pull_sel_reg = chip->recalc_addr(chip, PCAL953X_PULL_SEL, offset);
644         u8 bit = BIT(offset % BANK_SZ);
645         int ret;
646
647         /*
648          * pull-up/pull-down configuration requires PCAL extended
649          * registers
650          */
651         if (!(chip->driver_data & PCA_PCAL))
652                 return -ENOTSUPP;
653
654         guard(mutex)(&chip->i2c_lock);
655
656         /* Configure pull-up/pull-down */
657         if (param == PIN_CONFIG_BIAS_PULL_UP)
658                 ret = regmap_write_bits(chip->regmap, pull_sel_reg, bit, bit);
659         else if (param == PIN_CONFIG_BIAS_PULL_DOWN)
660                 ret = regmap_write_bits(chip->regmap, pull_sel_reg, bit, 0);
661         else
662                 ret = 0;
663         if (ret)
664                 return ret;
665
666         /* Disable/Enable pull-up/pull-down */
667         if (param == PIN_CONFIG_BIAS_DISABLE)
668                 return regmap_write_bits(chip->regmap, pull_en_reg, bit, 0);
669         else
670                 return regmap_write_bits(chip->regmap, pull_en_reg, bit, bit);
671 }
672
673 static int pca953x_gpio_set_config(struct gpio_chip *gc, unsigned int offset,
674                                    unsigned long config)
675 {
676         struct pca953x_chip *chip = gpiochip_get_data(gc);
677
678         switch (pinconf_to_config_param(config)) {
679         case PIN_CONFIG_BIAS_PULL_UP:
680         case PIN_CONFIG_BIAS_PULL_PIN_DEFAULT:
681         case PIN_CONFIG_BIAS_PULL_DOWN:
682         case PIN_CONFIG_BIAS_DISABLE:
683                 return pca953x_gpio_set_pull_up_down(chip, offset, config);
684         default:
685                 return -ENOTSUPP;
686         }
687 }
688
689 static void pca953x_setup_gpio(struct pca953x_chip *chip, int gpios)
690 {
691         struct gpio_chip *gc = &chip->gpio_chip;
692
693         gc->direction_input  = pca953x_gpio_direction_input;
694         gc->direction_output = pca953x_gpio_direction_output;
695         gc->get = pca953x_gpio_get_value;
696         gc->set = pca953x_gpio_set_value;
697         gc->get_direction = pca953x_gpio_get_direction;
698         gc->get_multiple = pca953x_gpio_get_multiple;
699         gc->set_multiple = pca953x_gpio_set_multiple;
700         gc->set_config = pca953x_gpio_set_config;
701         gc->can_sleep = true;
702
703         gc->base = chip->gpio_start;
704         gc->ngpio = gpios;
705         gc->label = dev_name(&chip->client->dev);
706         gc->parent = &chip->client->dev;
707         gc->owner = THIS_MODULE;
708 }
709
710 #ifdef CONFIG_GPIO_PCA953X_IRQ
711 static void pca953x_irq_mask(struct irq_data *d)
712 {
713         struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
714         struct pca953x_chip *chip = gpiochip_get_data(gc);
715         irq_hw_number_t hwirq = irqd_to_hwirq(d);
716
717         clear_bit(hwirq, chip->irq_mask);
718         gpiochip_disable_irq(gc, hwirq);
719 }
720
721 static void pca953x_irq_unmask(struct irq_data *d)
722 {
723         struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
724         struct pca953x_chip *chip = gpiochip_get_data(gc);
725         irq_hw_number_t hwirq = irqd_to_hwirq(d);
726
727         gpiochip_enable_irq(gc, hwirq);
728         set_bit(hwirq, chip->irq_mask);
729 }
730
731 static int pca953x_irq_set_wake(struct irq_data *d, unsigned int on)
732 {
733         struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
734         struct pca953x_chip *chip = gpiochip_get_data(gc);
735
736         if (on)
737                 atomic_inc(&chip->wakeup_path);
738         else
739                 atomic_dec(&chip->wakeup_path);
740
741         return irq_set_irq_wake(chip->client->irq, on);
742 }
743
744 static void pca953x_irq_bus_lock(struct irq_data *d)
745 {
746         struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
747         struct pca953x_chip *chip = gpiochip_get_data(gc);
748
749         mutex_lock(&chip->irq_lock);
750 }
751
752 static void pca953x_irq_bus_sync_unlock(struct irq_data *d)
753 {
754         struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
755         struct pca953x_chip *chip = gpiochip_get_data(gc);
756         DECLARE_BITMAP(irq_mask, MAX_LINE);
757         DECLARE_BITMAP(reg_direction, MAX_LINE);
758         int level;
759
760         if (chip->driver_data & PCA_PCAL) {
761                 guard(mutex)(&chip->i2c_lock);
762
763                 /* Enable latch on interrupt-enabled inputs */
764                 pca953x_write_regs(chip, PCAL953X_IN_LATCH, chip->irq_mask);
765
766                 bitmap_complement(irq_mask, chip->irq_mask, gc->ngpio);
767
768                 /* Unmask enabled interrupts */
769                 pca953x_write_regs(chip, PCAL953X_INT_MASK, irq_mask);
770         }
771
772         /* Switch direction to input if needed */
773         pca953x_read_regs(chip, chip->regs->direction, reg_direction);
774
775         bitmap_or(irq_mask, chip->irq_trig_fall, chip->irq_trig_raise, gc->ngpio);
776         bitmap_complement(reg_direction, reg_direction, gc->ngpio);
777         bitmap_and(irq_mask, irq_mask, reg_direction, gc->ngpio);
778
779         /* Look for any newly setup interrupt */
780         for_each_set_bit(level, irq_mask, gc->ngpio)
781                 pca953x_gpio_direction_input(&chip->gpio_chip, level);
782
783         mutex_unlock(&chip->irq_lock);
784 }
785
786 static int pca953x_irq_set_type(struct irq_data *d, unsigned int type)
787 {
788         struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
789         struct pca953x_chip *chip = gpiochip_get_data(gc);
790         struct device *dev = &chip->client->dev;
791         irq_hw_number_t hwirq = irqd_to_hwirq(d);
792
793         if (!(type & IRQ_TYPE_EDGE_BOTH)) {
794                 dev_err(dev, "irq %d: unsupported type %d\n", d->irq, type);
795                 return -EINVAL;
796         }
797
798         assign_bit(hwirq, chip->irq_trig_fall, type & IRQ_TYPE_EDGE_FALLING);
799         assign_bit(hwirq, chip->irq_trig_raise, type & IRQ_TYPE_EDGE_RISING);
800
801         return 0;
802 }
803
804 static void pca953x_irq_shutdown(struct irq_data *d)
805 {
806         struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
807         struct pca953x_chip *chip = gpiochip_get_data(gc);
808         irq_hw_number_t hwirq = irqd_to_hwirq(d);
809
810         clear_bit(hwirq, chip->irq_trig_raise);
811         clear_bit(hwirq, chip->irq_trig_fall);
812 }
813
814 static void pca953x_irq_print_chip(struct irq_data *data, struct seq_file *p)
815 {
816         struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
817
818         seq_printf(p, dev_name(gc->parent));
819 }
820
821 static const struct irq_chip pca953x_irq_chip = {
822         .irq_mask               = pca953x_irq_mask,
823         .irq_unmask             = pca953x_irq_unmask,
824         .irq_set_wake           = pca953x_irq_set_wake,
825         .irq_bus_lock           = pca953x_irq_bus_lock,
826         .irq_bus_sync_unlock    = pca953x_irq_bus_sync_unlock,
827         .irq_set_type           = pca953x_irq_set_type,
828         .irq_shutdown           = pca953x_irq_shutdown,
829         .irq_print_chip         = pca953x_irq_print_chip,
830         .flags                  = IRQCHIP_IMMUTABLE,
831         GPIOCHIP_IRQ_RESOURCE_HELPERS,
832 };
833
834 static bool pca953x_irq_pending(struct pca953x_chip *chip, unsigned long *pending)
835 {
836         struct gpio_chip *gc = &chip->gpio_chip;
837         DECLARE_BITMAP(reg_direction, MAX_LINE);
838         DECLARE_BITMAP(old_stat, MAX_LINE);
839         DECLARE_BITMAP(cur_stat, MAX_LINE);
840         DECLARE_BITMAP(new_stat, MAX_LINE);
841         DECLARE_BITMAP(trigger, MAX_LINE);
842         int ret;
843
844         if (chip->driver_data & PCA_PCAL) {
845                 /* Read the current interrupt status from the device */
846                 ret = pca953x_read_regs(chip, PCAL953X_INT_STAT, trigger);
847                 if (ret)
848                         return false;
849
850                 /* Check latched inputs and clear interrupt status */
851                 ret = pca953x_read_regs(chip, chip->regs->input, cur_stat);
852                 if (ret)
853                         return false;
854
855                 /* Apply filter for rising/falling edge selection */
856                 bitmap_replace(new_stat, chip->irq_trig_fall, chip->irq_trig_raise, cur_stat, gc->ngpio);
857
858                 bitmap_and(pending, new_stat, trigger, gc->ngpio);
859
860                 return !bitmap_empty(pending, gc->ngpio);
861         }
862
863         ret = pca953x_read_regs(chip, chip->regs->input, cur_stat);
864         if (ret)
865                 return false;
866
867         /* Remove output pins from the equation */
868         pca953x_read_regs(chip, chip->regs->direction, reg_direction);
869
870         bitmap_copy(old_stat, chip->irq_stat, gc->ngpio);
871
872         bitmap_and(new_stat, cur_stat, reg_direction, gc->ngpio);
873         bitmap_xor(cur_stat, new_stat, old_stat, gc->ngpio);
874         bitmap_and(trigger, cur_stat, chip->irq_mask, gc->ngpio);
875
876         bitmap_copy(chip->irq_stat, new_stat, gc->ngpio);
877
878         if (bitmap_empty(trigger, gc->ngpio))
879                 return false;
880
881         bitmap_and(cur_stat, chip->irq_trig_fall, old_stat, gc->ngpio);
882         bitmap_and(old_stat, chip->irq_trig_raise, new_stat, gc->ngpio);
883         bitmap_or(new_stat, old_stat, cur_stat, gc->ngpio);
884         bitmap_and(pending, new_stat, trigger, gc->ngpio);
885
886         return !bitmap_empty(pending, gc->ngpio);
887 }
888
889 static irqreturn_t pca953x_irq_handler(int irq, void *devid)
890 {
891         struct pca953x_chip *chip = devid;
892         struct gpio_chip *gc = &chip->gpio_chip;
893         DECLARE_BITMAP(pending, MAX_LINE);
894         int level;
895         bool ret;
896
897         bitmap_zero(pending, MAX_LINE);
898
899         scoped_guard(mutex, &chip->i2c_lock)
900                 ret = pca953x_irq_pending(chip, pending);
901         if (ret) {
902                 ret = 0;
903
904                 for_each_set_bit(level, pending, gc->ngpio) {
905                         int nested_irq = irq_find_mapping(gc->irq.domain, level);
906
907                         if (unlikely(nested_irq <= 0)) {
908                                 dev_warn_ratelimited(gc->parent, "unmapped interrupt %d\n", level);
909                                 continue;
910                         }
911
912                         handle_nested_irq(nested_irq);
913                         ret = 1;
914                 }
915         }
916
917         return IRQ_RETVAL(ret);
918 }
919
920 static int pca953x_irq_setup(struct pca953x_chip *chip, int irq_base)
921 {
922         struct i2c_client *client = chip->client;
923         struct device *dev = &client->dev;
924         DECLARE_BITMAP(reg_direction, MAX_LINE);
925         DECLARE_BITMAP(irq_stat, MAX_LINE);
926         struct gpio_chip *gc = &chip->gpio_chip;
927         struct gpio_irq_chip *girq;
928         int ret;
929
930         if (dmi_first_match(pca953x_dmi_acpi_irq_info)) {
931                 ret = pca953x_acpi_get_irq(dev);
932                 if (ret > 0)
933                         client->irq = ret;
934         }
935
936         if (!client->irq)
937                 return 0;
938
939         if (irq_base == -1)
940                 return 0;
941
942         if (!(chip->driver_data & PCA_INT))
943                 return 0;
944
945         ret = pca953x_read_regs(chip, chip->regs->input, irq_stat);
946         if (ret)
947                 return ret;
948
949         /*
950          * There is no way to know which GPIO line generated the
951          * interrupt.  We have to rely on the previous read for
952          * this purpose.
953          */
954         pca953x_read_regs(chip, chip->regs->direction, reg_direction);
955         bitmap_and(chip->irq_stat, irq_stat, reg_direction, gc->ngpio);
956         mutex_init(&chip->irq_lock);
957
958         girq = &chip->gpio_chip.irq;
959         gpio_irq_chip_set_chip(girq, &pca953x_irq_chip);
960         /* This will let us handle the parent IRQ in the driver */
961         girq->parent_handler = NULL;
962         girq->num_parents = 0;
963         girq->parents = NULL;
964         girq->default_type = IRQ_TYPE_NONE;
965         girq->handler = handle_simple_irq;
966         girq->threaded = true;
967         girq->first = irq_base; /* FIXME: get rid of this */
968
969         ret = devm_request_threaded_irq(dev, client->irq, NULL, pca953x_irq_handler,
970                                         IRQF_ONESHOT | IRQF_SHARED, dev_name(dev),
971                                         chip);
972         if (ret)
973                 return dev_err_probe(dev, client->irq, "failed to request irq\n");
974
975         return 0;
976 }
977
978 #else /* CONFIG_GPIO_PCA953X_IRQ */
979 static int pca953x_irq_setup(struct pca953x_chip *chip, int irq_base)
980 {
981         struct i2c_client *client = chip->client;
982         struct device *dev = &client->dev;
983
984         if (client->irq && irq_base != -1 && (chip->driver_data & PCA_INT))
985                 dev_warn(dev, "interrupt support not compiled in\n");
986
987         return 0;
988 }
989 #endif
990
991 static int device_pca95xx_init(struct pca953x_chip *chip)
992 {
993         DECLARE_BITMAP(val, MAX_LINE);
994         u8 regaddr;
995         int ret;
996
997         regaddr = chip->recalc_addr(chip, chip->regs->output, 0);
998         ret = regcache_sync_region(chip->regmap, regaddr,
999                                    regaddr + NBANK(chip) - 1);
1000         if (ret)
1001                 return ret;
1002
1003         regaddr = chip->recalc_addr(chip, chip->regs->direction, 0);
1004         ret = regcache_sync_region(chip->regmap, regaddr,
1005                                    regaddr + NBANK(chip) - 1);
1006         if (ret)
1007                 return ret;
1008
1009         /* clear polarity inversion */
1010         bitmap_zero(val, MAX_LINE);
1011
1012         return pca953x_write_regs(chip, chip->regs->invert, val);
1013 }
1014
1015 static int device_pca957x_init(struct pca953x_chip *chip)
1016 {
1017         DECLARE_BITMAP(val, MAX_LINE);
1018         unsigned int i;
1019         int ret;
1020
1021         ret = device_pca95xx_init(chip);
1022         if (ret)
1023                 return ret;
1024
1025         /* To enable register 6, 7 to control pull up and pull down */
1026         for (i = 0; i < NBANK(chip); i++)
1027                 bitmap_set_value8(val, 0x02, i * BANK_SZ);
1028
1029         return pca953x_write_regs(chip, PCA957X_BKEN, val);
1030 }
1031
1032 static void pca953x_disable_regulator(void *reg)
1033 {
1034         regulator_disable(reg);
1035 }
1036
1037 static int pca953x_get_and_enable_regulator(struct pca953x_chip *chip)
1038 {
1039         struct device *dev = &chip->client->dev;
1040         struct regulator *reg = chip->regulator;
1041         int ret;
1042
1043         reg = devm_regulator_get(dev, "vcc");
1044         if (IS_ERR(reg))
1045                 return dev_err_probe(dev, PTR_ERR(reg), "reg get err\n");
1046
1047         ret = regulator_enable(reg);
1048         if (ret)
1049                 return dev_err_probe(dev, ret, "reg en err\n");
1050
1051         ret = devm_add_action_or_reset(dev, pca953x_disable_regulator, reg);
1052         if (ret)
1053                 return ret;
1054
1055         chip->regulator = reg;
1056         return 0;
1057 }
1058
1059 static int pca953x_probe(struct i2c_client *client)
1060 {
1061         struct device *dev = &client->dev;
1062         struct pca953x_platform_data *pdata;
1063         struct pca953x_chip *chip;
1064         int irq_base;
1065         int ret;
1066         const struct regmap_config *regmap_config;
1067
1068         chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
1069         if (chip == NULL)
1070                 return -ENOMEM;
1071
1072         pdata = dev_get_platdata(dev);
1073         if (pdata) {
1074                 irq_base = pdata->irq_base;
1075                 chip->gpio_start = pdata->gpio_base;
1076         } else {
1077                 struct gpio_desc *reset_gpio;
1078
1079                 chip->gpio_start = -1;
1080                 irq_base = 0;
1081
1082                 /*
1083                  * See if we need to de-assert a reset pin.
1084                  *
1085                  * There is no known ACPI-enabled platforms that are
1086                  * using "reset" GPIO. Otherwise any of those platform
1087                  * must use _DSD method with corresponding property.
1088                  */
1089                 reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
1090                 if (IS_ERR(reset_gpio))
1091                         return PTR_ERR(reset_gpio);
1092         }
1093
1094         chip->client = client;
1095         chip->driver_data = (uintptr_t)i2c_get_match_data(client);
1096         if (!chip->driver_data)
1097                 return -ENODEV;
1098
1099         ret = pca953x_get_and_enable_regulator(chip);
1100         if (ret)
1101                 return ret;
1102
1103         i2c_set_clientdata(client, chip);
1104
1105         pca953x_setup_gpio(chip, chip->driver_data & PCA_GPIO_MASK);
1106
1107         if (NBANK(chip) > 2 || PCA_CHIP_TYPE(chip->driver_data) == PCA957X_TYPE) {
1108                 dev_info(dev, "using AI\n");
1109                 regmap_config = &pca953x_ai_i2c_regmap;
1110         } else {
1111                 dev_info(dev, "using no AI\n");
1112                 regmap_config = &pca953x_i2c_regmap;
1113         }
1114
1115         if (PCA_CHIP_TYPE(chip->driver_data) == PCAL653X_TYPE) {
1116                 chip->recalc_addr = pcal6534_recalc_addr;
1117                 chip->check_reg = pcal6534_check_register;
1118         } else {
1119                 chip->recalc_addr = pca953x_recalc_addr;
1120                 chip->check_reg = pca953x_check_register;
1121         }
1122
1123         chip->regmap = devm_regmap_init_i2c(client, regmap_config);
1124         if (IS_ERR(chip->regmap))
1125                 return PTR_ERR(chip->regmap);
1126
1127         regcache_mark_dirty(chip->regmap);
1128
1129         mutex_init(&chip->i2c_lock);
1130         /*
1131          * In case we have an i2c-mux controlled by a GPIO provided by an
1132          * expander using the same driver higher on the device tree, read the
1133          * i2c adapter nesting depth and use the retrieved value as lockdep
1134          * subclass for chip->i2c_lock.
1135          *
1136          * REVISIT: This solution is not complete. It protects us from lockdep
1137          * false positives when the expander controlling the i2c-mux is on
1138          * a different level on the device tree, but not when it's on the same
1139          * level on a different branch (in which case the subclass number
1140          * would be the same).
1141          *
1142          * TODO: Once a correct solution is developed, a similar fix should be
1143          * applied to all other i2c-controlled GPIO expanders (and potentially
1144          * regmap-i2c).
1145          */
1146         lockdep_set_subclass(&chip->i2c_lock,
1147                              i2c_adapter_depth(client->adapter));
1148
1149         /* initialize cached registers from their original values.
1150          * we can't share this chip with another i2c master.
1151          */
1152         if (PCA_CHIP_TYPE(chip->driver_data) == PCA957X_TYPE) {
1153                 chip->regs = &pca957x_regs;
1154                 ret = device_pca957x_init(chip);
1155         } else {
1156                 chip->regs = &pca953x_regs;
1157                 ret = device_pca95xx_init(chip);
1158         }
1159         if (ret)
1160                 return ret;
1161
1162         ret = pca953x_irq_setup(chip, irq_base);
1163         if (ret)
1164                 return ret;
1165
1166         return devm_gpiochip_add_data(dev, &chip->gpio_chip, chip);
1167 }
1168
1169 static int pca953x_regcache_sync(struct pca953x_chip *chip)
1170 {
1171         struct device *dev = &chip->client->dev;
1172         int ret;
1173         u8 regaddr;
1174
1175         /*
1176          * The ordering between direction and output is important,
1177          * sync these registers first and only then sync the rest.
1178          */
1179         regaddr = chip->recalc_addr(chip, chip->regs->direction, 0);
1180         ret = regcache_sync_region(chip->regmap, regaddr, regaddr + NBANK(chip) - 1);
1181         if (ret) {
1182                 dev_err(dev, "Failed to sync GPIO dir registers: %d\n", ret);
1183                 return ret;
1184         }
1185
1186         regaddr = chip->recalc_addr(chip, chip->regs->output, 0);
1187         ret = regcache_sync_region(chip->regmap, regaddr, regaddr + NBANK(chip) - 1);
1188         if (ret) {
1189                 dev_err(dev, "Failed to sync GPIO out registers: %d\n", ret);
1190                 return ret;
1191         }
1192
1193 #ifdef CONFIG_GPIO_PCA953X_IRQ
1194         if (chip->driver_data & PCA_PCAL) {
1195                 regaddr = chip->recalc_addr(chip, PCAL953X_IN_LATCH, 0);
1196                 ret = regcache_sync_region(chip->regmap, regaddr,
1197                                            regaddr + NBANK(chip) - 1);
1198                 if (ret) {
1199                         dev_err(dev, "Failed to sync INT latch registers: %d\n",
1200                                 ret);
1201                         return ret;
1202                 }
1203
1204                 regaddr = chip->recalc_addr(chip, PCAL953X_INT_MASK, 0);
1205                 ret = regcache_sync_region(chip->regmap, regaddr,
1206                                            regaddr + NBANK(chip) - 1);
1207                 if (ret) {
1208                         dev_err(dev, "Failed to sync INT mask registers: %d\n",
1209                                 ret);
1210                         return ret;
1211                 }
1212         }
1213 #endif
1214
1215         return 0;
1216 }
1217
1218 static int pca953x_restore_context(struct pca953x_chip *chip)
1219 {
1220         int ret;
1221
1222         guard(mutex)(&chip->i2c_lock);
1223
1224         regcache_cache_only(chip->regmap, false);
1225         regcache_mark_dirty(chip->regmap);
1226         ret = pca953x_regcache_sync(chip);
1227         if (ret)
1228                 return ret;
1229
1230         return regcache_sync(chip->regmap);
1231 }
1232
1233 static void pca953x_save_context(struct pca953x_chip *chip)
1234 {
1235         guard(mutex)(&chip->i2c_lock);
1236         regcache_cache_only(chip->regmap, true);
1237 }
1238
1239 static int pca953x_suspend(struct device *dev)
1240 {
1241         struct pca953x_chip *chip = dev_get_drvdata(dev);
1242
1243         pca953x_save_context(chip);
1244
1245         if (atomic_read(&chip->wakeup_path))
1246                 device_set_wakeup_path(dev);
1247         else
1248                 regulator_disable(chip->regulator);
1249
1250         return 0;
1251 }
1252
1253 static int pca953x_resume(struct device *dev)
1254 {
1255         struct pca953x_chip *chip = dev_get_drvdata(dev);
1256         int ret;
1257
1258         if (!atomic_read(&chip->wakeup_path)) {
1259                 ret = regulator_enable(chip->regulator);
1260                 if (ret) {
1261                         dev_err(dev, "Failed to enable regulator: %d\n", ret);
1262                         return 0;
1263                 }
1264         }
1265
1266         ret = pca953x_restore_context(chip);
1267         if (ret)
1268                 dev_err(dev, "Failed to restore register map: %d\n", ret);
1269
1270         return ret;
1271 }
1272
1273 static DEFINE_SIMPLE_DEV_PM_OPS(pca953x_pm_ops, pca953x_suspend, pca953x_resume);
1274
1275 /* convenience to stop overlong match-table lines */
1276 #define OF_653X(__nrgpio, __int) ((void *)(__nrgpio | PCAL653X_TYPE | __int))
1277 #define OF_953X(__nrgpio, __int) (void *)(__nrgpio | PCA953X_TYPE | __int)
1278 #define OF_957X(__nrgpio, __int) (void *)(__nrgpio | PCA957X_TYPE | __int)
1279
1280 static const struct of_device_id pca953x_dt_ids[] = {
1281         { .compatible = "nxp,pca6408", .data = OF_953X(8, PCA_INT), },
1282         { .compatible = "nxp,pca6416", .data = OF_953X(16, PCA_INT), },
1283         { .compatible = "nxp,pca9505", .data = OF_953X(40, PCA_INT), },
1284         { .compatible = "nxp,pca9506", .data = OF_953X(40, PCA_INT), },
1285         { .compatible = "nxp,pca9534", .data = OF_953X( 8, PCA_INT), },
1286         { .compatible = "nxp,pca9535", .data = OF_953X(16, PCA_INT), },
1287         { .compatible = "nxp,pca9536", .data = OF_953X( 4, 0), },
1288         { .compatible = "nxp,pca9537", .data = OF_953X( 4, PCA_INT), },
1289         { .compatible = "nxp,pca9538", .data = OF_953X( 8, PCA_INT), },
1290         { .compatible = "nxp,pca9539", .data = OF_953X(16, PCA_INT), },
1291         { .compatible = "nxp,pca9554", .data = OF_953X( 8, PCA_INT), },
1292         { .compatible = "nxp,pca9555", .data = OF_953X(16, PCA_INT), },
1293         { .compatible = "nxp,pca9556", .data = OF_953X( 8, 0), },
1294         { .compatible = "nxp,pca9557", .data = OF_953X( 8, 0), },
1295         { .compatible = "nxp,pca9574", .data = OF_957X( 8, PCA_INT), },
1296         { .compatible = "nxp,pca9575", .data = OF_957X(16, PCA_INT), },
1297         { .compatible = "nxp,pca9698", .data = OF_953X(40, 0), },
1298
1299         { .compatible = "nxp,pcal6408", .data = OF_953X(8, PCA_LATCH_INT), },
1300         { .compatible = "nxp,pcal6416", .data = OF_953X(16, PCA_LATCH_INT), },
1301         { .compatible = "nxp,pcal6524", .data = OF_953X(24, PCA_LATCH_INT), },
1302         { .compatible = "nxp,pcal6534", .data = OF_653X(34, PCA_LATCH_INT), },
1303         { .compatible = "nxp,pcal9535", .data = OF_953X(16, PCA_LATCH_INT), },
1304         { .compatible = "nxp,pcal9554b", .data = OF_953X( 8, PCA_LATCH_INT), },
1305         { .compatible = "nxp,pcal9555a", .data = OF_953X(16, PCA_LATCH_INT), },
1306
1307         { .compatible = "maxim,max7310", .data = OF_953X( 8, 0), },
1308         { .compatible = "maxim,max7312", .data = OF_953X(16, PCA_INT), },
1309         { .compatible = "maxim,max7313", .data = OF_953X(16, PCA_INT), },
1310         { .compatible = "maxim,max7315", .data = OF_953X( 8, PCA_INT), },
1311         { .compatible = "maxim,max7318", .data = OF_953X(16, PCA_INT), },
1312
1313         { .compatible = "ti,pca6107", .data = OF_953X( 8, PCA_INT), },
1314         { .compatible = "ti,pca9536", .data = OF_953X( 4, 0), },
1315         { .compatible = "ti,tca6408", .data = OF_953X( 8, PCA_INT), },
1316         { .compatible = "ti,tca6416", .data = OF_953X(16, PCA_INT), },
1317         { .compatible = "ti,tca6424", .data = OF_953X(24, PCA_INT), },
1318         { .compatible = "ti,tca9535", .data = OF_953X(16, PCA_INT), },
1319         { .compatible = "ti,tca9538", .data = OF_953X( 8, PCA_INT), },
1320         { .compatible = "ti,tca9539", .data = OF_953X(16, PCA_INT), },
1321
1322         { .compatible = "onnn,cat9554", .data = OF_953X( 8, PCA_INT), },
1323         { .compatible = "onnn,pca9654", .data = OF_953X( 8, PCA_INT), },
1324         { .compatible = "onnn,pca9655", .data = OF_953X(16, PCA_INT), },
1325
1326         { .compatible = "exar,xra1202", .data = OF_953X( 8, 0), },
1327         { }
1328 };
1329
1330 MODULE_DEVICE_TABLE(of, pca953x_dt_ids);
1331
1332 static struct i2c_driver pca953x_driver = {
1333         .driver = {
1334                 .name   = "pca953x",
1335                 .pm     = pm_sleep_ptr(&pca953x_pm_ops),
1336                 .of_match_table = pca953x_dt_ids,
1337                 .acpi_match_table = pca953x_acpi_ids,
1338         },
1339         .probe          = pca953x_probe,
1340         .id_table       = pca953x_id,
1341 };
1342
1343 static int __init pca953x_init(void)
1344 {
1345         return i2c_add_driver(&pca953x_driver);
1346 }
1347 /* register after i2c postcore initcall and before
1348  * subsys initcalls that may rely on these GPIOs
1349  */
1350 subsys_initcall(pca953x_init);
1351
1352 static void __exit pca953x_exit(void)
1353 {
1354         i2c_del_driver(&pca953x_driver);
1355 }
1356 module_exit(pca953x_exit);
1357
1358 MODULE_AUTHOR("eric miao <[email protected]>");
1359 MODULE_DESCRIPTION("GPIO expander driver for PCA953x");
1360 MODULE_LICENSE("GPL");
This page took 0.116076 seconds and 4 git commands to generate.