1 /* SPDX-License-Identifier: GPL-2.0 */
3 #ifndef _LINUX_INTERRUPT_H
4 #define _LINUX_INTERRUPT_H
6 #include <linux/kernel.h>
7 #include <linux/bitops.h>
8 #include <linux/cpumask.h>
9 #include <linux/irqreturn.h>
10 #include <linux/irqnr.h>
11 #include <linux/hardirq.h>
12 #include <linux/irqflags.h>
13 #include <linux/hrtimer.h>
14 #include <linux/kref.h>
15 #include <linux/workqueue.h>
16 #include <linux/jump_label.h>
18 #include <linux/atomic.h>
19 #include <asm/ptrace.h>
21 #include <asm/sections.h>
24 * These correspond to the IORESOURCE_IRQ_* defines in
25 * linux/ioport.h to select the interrupt line behaviour. When
26 * requesting an interrupt without specifying a IRQF_TRIGGER, the
27 * setting should be assumed to be "as already configured", which
28 * may be as per machine or firmware initialisation.
30 #define IRQF_TRIGGER_NONE 0x00000000
31 #define IRQF_TRIGGER_RISING 0x00000001
32 #define IRQF_TRIGGER_FALLING 0x00000002
33 #define IRQF_TRIGGER_HIGH 0x00000004
34 #define IRQF_TRIGGER_LOW 0x00000008
35 #define IRQF_TRIGGER_MASK (IRQF_TRIGGER_HIGH | IRQF_TRIGGER_LOW | \
36 IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)
37 #define IRQF_TRIGGER_PROBE 0x00000010
40 * These flags used only by the kernel as part of the
41 * irq handling routines.
43 * IRQF_SHARED - allow sharing the irq among several devices
44 * IRQF_PROBE_SHARED - set by callers when they expect sharing mismatches to occur
45 * IRQF_TIMER - Flag to mark this interrupt as timer interrupt
46 * IRQF_PERCPU - Interrupt is per cpu
47 * IRQF_NOBALANCING - Flag to exclude this interrupt from irq balancing
48 * IRQF_IRQPOLL - Interrupt is used for polling (only the interrupt that is
49 * registered first in a shared interrupt is considered for
50 * performance reasons)
51 * IRQF_ONESHOT - Interrupt is not reenabled after the hardirq handler finished.
52 * Used by threaded interrupts which need to keep the
53 * irq line disabled until the threaded handler has been run.
54 * IRQF_NO_SUSPEND - Do not disable this IRQ during suspend. Does not guarantee
55 * that this interrupt will wake the system from a suspended
56 * state. See Documentation/power/suspend-and-interrupts.rst
57 * IRQF_FORCE_RESUME - Force enable it on resume even if IRQF_NO_SUSPEND is set
58 * IRQF_NO_THREAD - Interrupt cannot be threaded
59 * IRQF_EARLY_RESUME - Resume IRQ early during syscore instead of at device
61 * IRQF_COND_SUSPEND - If the IRQ is shared with a NO_SUSPEND user, execute this
62 * interrupt handler after suspending interrupts. For system
63 * wakeup devices users need to implement wakeup detection in
64 * their interrupt handlers.
65 * IRQF_NO_AUTOEN - Don't enable IRQ or NMI automatically when users request it.
66 * Users will enable it explicitly by enable_irq() or enable_nmi()
68 * IRQF_NO_DEBUG - Exclude from runnaway detection for IPI and similar handlers,
69 * depends on IRQF_PERCPU.
71 #define IRQF_SHARED 0x00000080
72 #define IRQF_PROBE_SHARED 0x00000100
73 #define __IRQF_TIMER 0x00000200
74 #define IRQF_PERCPU 0x00000400
75 #define IRQF_NOBALANCING 0x00000800
76 #define IRQF_IRQPOLL 0x00001000
77 #define IRQF_ONESHOT 0x00002000
78 #define IRQF_NO_SUSPEND 0x00004000
79 #define IRQF_FORCE_RESUME 0x00008000
80 #define IRQF_NO_THREAD 0x00010000
81 #define IRQF_EARLY_RESUME 0x00020000
82 #define IRQF_COND_SUSPEND 0x00040000
83 #define IRQF_NO_AUTOEN 0x00080000
84 #define IRQF_NO_DEBUG 0x00100000
86 #define IRQF_TIMER (__IRQF_TIMER | IRQF_NO_SUSPEND | IRQF_NO_THREAD)
89 * These values can be returned by request_any_context_irq() and
90 * describe the context the interrupt will be run in.
92 * IRQC_IS_HARDIRQ - interrupt runs in hardirq context
93 * IRQC_IS_NESTED - interrupt runs in a nested threaded context
100 typedef irqreturn_t (*irq_handler_t)(int, void *);
103 * struct irqaction - per interrupt action descriptor
104 * @handler: interrupt handler function
105 * @name: name of the device
106 * @dev_id: cookie to identify the device
107 * @percpu_dev_id: cookie to identify the device
108 * @next: pointer to the next irqaction for shared interrupts
109 * @irq: interrupt number
110 * @flags: flags (see IRQF_* above)
111 * @thread_fn: interrupt handler function for threaded interrupts
112 * @thread: thread pointer for threaded interrupts
113 * @secondary: pointer to secondary irqaction (force threading)
114 * @thread_flags: flags related to @thread
115 * @thread_mask: bitmask for keeping track of @thread activity
116 * @dir: pointer to the proc/irq/NN/name entry
119 irq_handler_t handler;
121 void __percpu *percpu_dev_id;
122 struct irqaction *next;
123 irq_handler_t thread_fn;
124 struct task_struct *thread;
125 struct irqaction *secondary;
128 unsigned long thread_flags;
129 unsigned long thread_mask;
131 struct proc_dir_entry *dir;
132 } ____cacheline_internodealigned_in_smp;
134 extern irqreturn_t no_action(int cpl, void *dev_id);
137 * If a (PCI) device interrupt is not connected we set dev->irq to
138 * IRQ_NOTCONNECTED. This causes request_irq() to fail with -ENOTCONN, so we
139 * can distingiush that case from other error returns.
141 * 0x80000000 is guaranteed to be outside the available range of interrupts
142 * and easy to distinguish from other possible incorrect values.
144 #define IRQ_NOTCONNECTED (1U << 31)
146 extern int __must_check
147 request_threaded_irq(unsigned int irq, irq_handler_t handler,
148 irq_handler_t thread_fn,
149 unsigned long flags, const char *name, void *dev);
152 * request_irq - Add a handler for an interrupt line
153 * @irq: The interrupt line to allocate
154 * @handler: Function to be called when the IRQ occurs.
155 * Primary handler for threaded interrupts
156 * If NULL, the default primary handler is installed
157 * @flags: Handling flags
158 * @name: Name of the device generating this interrupt
159 * @dev: A cookie passed to the handler function
161 * This call allocates an interrupt and establishes a handler; see
162 * the documentation for request_threaded_irq() for details.
164 static inline int __must_check
165 request_irq(unsigned int irq, irq_handler_t handler, unsigned long flags,
166 const char *name, void *dev)
168 return request_threaded_irq(irq, handler, NULL, flags, name, dev);
171 extern int __must_check
172 request_any_context_irq(unsigned int irq, irq_handler_t handler,
173 unsigned long flags, const char *name, void *dev_id);
175 extern int __must_check
176 __request_percpu_irq(unsigned int irq, irq_handler_t handler,
177 unsigned long flags, const char *devname,
178 void __percpu *percpu_dev_id);
180 extern int __must_check
181 request_nmi(unsigned int irq, irq_handler_t handler, unsigned long flags,
182 const char *name, void *dev);
184 static inline int __must_check
185 request_percpu_irq(unsigned int irq, irq_handler_t handler,
186 const char *devname, void __percpu *percpu_dev_id)
188 return __request_percpu_irq(irq, handler, 0,
189 devname, percpu_dev_id);
192 extern int __must_check
193 request_percpu_nmi(unsigned int irq, irq_handler_t handler,
194 const char *devname, void __percpu *dev);
196 extern const void *free_irq(unsigned int, void *);
197 extern void free_percpu_irq(unsigned int, void __percpu *);
199 extern const void *free_nmi(unsigned int irq, void *dev_id);
200 extern void free_percpu_nmi(unsigned int irq, void __percpu *percpu_dev_id);
204 extern int __must_check
205 devm_request_threaded_irq(struct device *dev, unsigned int irq,
206 irq_handler_t handler, irq_handler_t thread_fn,
207 unsigned long irqflags, const char *devname,
210 static inline int __must_check
211 devm_request_irq(struct device *dev, unsigned int irq, irq_handler_t handler,
212 unsigned long irqflags, const char *devname, void *dev_id)
214 return devm_request_threaded_irq(dev, irq, handler, NULL, irqflags,
218 extern int __must_check
219 devm_request_any_context_irq(struct device *dev, unsigned int irq,
220 irq_handler_t handler, unsigned long irqflags,
221 const char *devname, void *dev_id);
223 extern void devm_free_irq(struct device *dev, unsigned int irq, void *dev_id);
226 * On lockdep we dont want to enable hardirqs in hardirq
227 * context. Use local_irq_enable_in_hardirq() to annotate
228 * kernel code that has to do this nevertheless (pretty much
229 * the only valid case is for old/broken hardware that is
232 * NOTE: in theory this might break fragile code that relies
233 * on hardirq delivery - in practice we dont seem to have such
234 * places left. So the only effect should be slightly increased
235 * irqs-off latencies.
237 #ifdef CONFIG_LOCKDEP
238 # define local_irq_enable_in_hardirq() do { } while (0)
240 # define local_irq_enable_in_hardirq() local_irq_enable()
243 bool irq_has_action(unsigned int irq);
244 extern void disable_irq_nosync(unsigned int irq);
245 extern bool disable_hardirq(unsigned int irq);
246 extern void disable_irq(unsigned int irq);
247 extern void disable_percpu_irq(unsigned int irq);
248 extern void enable_irq(unsigned int irq);
249 extern void enable_percpu_irq(unsigned int irq, unsigned int type);
250 extern bool irq_percpu_is_enabled(unsigned int irq);
251 extern void irq_wake_thread(unsigned int irq, void *dev_id);
253 extern void disable_nmi_nosync(unsigned int irq);
254 extern void disable_percpu_nmi(unsigned int irq);
255 extern void enable_nmi(unsigned int irq);
256 extern void enable_percpu_nmi(unsigned int irq, unsigned int type);
257 extern int prepare_percpu_nmi(unsigned int irq);
258 extern void teardown_percpu_nmi(unsigned int irq);
260 extern int irq_inject_interrupt(unsigned int irq);
262 /* The following three functions are for the core kernel use only. */
263 extern void suspend_device_irqs(void);
264 extern void resume_device_irqs(void);
265 extern void rearm_wake_irq(unsigned int irq);
268 * struct irq_affinity_notify - context for notification of IRQ affinity changes
269 * @irq: Interrupt to which notification applies
270 * @kref: Reference count, for internal use
271 * @work: Work item, for internal use
272 * @notify: Function to be called on change. This will be
273 * called in process context.
274 * @release: Function to be called on release. This will be
275 * called in process context. Once registered, the
276 * structure must only be freed when this function is
279 struct irq_affinity_notify {
282 struct work_struct work;
283 void (*notify)(struct irq_affinity_notify *, const cpumask_t *mask);
284 void (*release)(struct kref *ref);
287 #define IRQ_AFFINITY_MAX_SETS 4
290 * struct irq_affinity - Description for automatic irq affinity assignements
291 * @pre_vectors: Don't apply affinity to @pre_vectors at beginning of
292 * the MSI(-X) vector space
293 * @post_vectors: Don't apply affinity to @post_vectors at end of
294 * the MSI(-X) vector space
295 * @nr_sets: The number of interrupt sets for which affinity
296 * spreading is required
297 * @set_size: Array holding the size of each interrupt set
298 * @calc_sets: Callback for calculating the number and size
300 * @priv: Private data for usage by @calc_sets, usually a
301 * pointer to driver/device specific data.
303 struct irq_affinity {
304 unsigned int pre_vectors;
305 unsigned int post_vectors;
306 unsigned int nr_sets;
307 unsigned int set_size[IRQ_AFFINITY_MAX_SETS];
308 void (*calc_sets)(struct irq_affinity *, unsigned int nvecs);
313 * struct irq_affinity_desc - Interrupt affinity descriptor
314 * @mask: cpumask to hold the affinity assignment
315 * @is_managed: 1 if the interrupt is managed internally
317 struct irq_affinity_desc {
319 unsigned int is_managed : 1;
322 #if defined(CONFIG_SMP)
324 extern cpumask_var_t irq_default_affinity;
326 extern int irq_set_affinity(unsigned int irq, const struct cpumask *cpumask);
327 extern int irq_force_affinity(unsigned int irq, const struct cpumask *cpumask);
329 extern int irq_can_set_affinity(unsigned int irq);
330 extern int irq_select_affinity(unsigned int irq);
332 extern int __irq_apply_affinity_hint(unsigned int irq, const struct cpumask *m,
336 * irq_update_affinity_hint - Update the affinity hint
337 * @irq: Interrupt to update
338 * @m: cpumask pointer (NULL to clear the hint)
340 * Updates the affinity hint, but does not change the affinity of the interrupt.
343 irq_update_affinity_hint(unsigned int irq, const struct cpumask *m)
345 return __irq_apply_affinity_hint(irq, m, false);
349 * irq_set_affinity_and_hint - Update the affinity hint and apply the provided
350 * cpumask to the interrupt
351 * @irq: Interrupt to update
352 * @m: cpumask pointer (NULL to clear the hint)
354 * Updates the affinity hint and if @m is not NULL it applies it as the
355 * affinity of that interrupt.
358 irq_set_affinity_and_hint(unsigned int irq, const struct cpumask *m)
360 return __irq_apply_affinity_hint(irq, m, true);
364 * Deprecated. Use irq_update_affinity_hint() or irq_set_affinity_and_hint()
367 static inline int irq_set_affinity_hint(unsigned int irq, const struct cpumask *m)
369 return irq_set_affinity_and_hint(irq, m);
372 extern int irq_update_affinity_desc(unsigned int irq,
373 struct irq_affinity_desc *affinity);
376 irq_set_affinity_notifier(unsigned int irq, struct irq_affinity_notify *notify);
378 struct irq_affinity_desc *
379 irq_create_affinity_masks(unsigned int nvec, struct irq_affinity *affd);
381 unsigned int irq_calc_affinity_vectors(unsigned int minvec, unsigned int maxvec,
382 const struct irq_affinity *affd);
384 #else /* CONFIG_SMP */
386 static inline int irq_set_affinity(unsigned int irq, const struct cpumask *m)
391 static inline int irq_force_affinity(unsigned int irq, const struct cpumask *cpumask)
396 static inline int irq_can_set_affinity(unsigned int irq)
401 static inline int irq_select_affinity(unsigned int irq) { return 0; }
403 static inline int irq_update_affinity_hint(unsigned int irq,
404 const struct cpumask *m)
409 static inline int irq_set_affinity_and_hint(unsigned int irq,
410 const struct cpumask *m)
415 static inline int irq_set_affinity_hint(unsigned int irq,
416 const struct cpumask *m)
421 static inline int irq_update_affinity_desc(unsigned int irq,
422 struct irq_affinity_desc *affinity)
428 irq_set_affinity_notifier(unsigned int irq, struct irq_affinity_notify *notify)
433 static inline struct irq_affinity_desc *
434 irq_create_affinity_masks(unsigned int nvec, struct irq_affinity *affd)
439 static inline unsigned int
440 irq_calc_affinity_vectors(unsigned int minvec, unsigned int maxvec,
441 const struct irq_affinity *affd)
446 #endif /* CONFIG_SMP */
449 * Special lockdep variants of irq disabling/enabling.
450 * These should be used for locking constructs that
451 * know that a particular irq context which is disabled,
452 * and which is the only irq-context user of a lock,
453 * that it's safe to take the lock in the irq-disabled
454 * section without disabling hardirqs.
456 * On !CONFIG_LOCKDEP they are equivalent to the normal
457 * irq disable/enable methods.
459 static inline void disable_irq_nosync_lockdep(unsigned int irq)
461 disable_irq_nosync(irq);
462 #ifdef CONFIG_LOCKDEP
467 static inline void disable_irq_nosync_lockdep_irqsave(unsigned int irq, unsigned long *flags)
469 disable_irq_nosync(irq);
470 #ifdef CONFIG_LOCKDEP
471 local_irq_save(*flags);
475 static inline void disable_irq_lockdep(unsigned int irq)
478 #ifdef CONFIG_LOCKDEP
483 static inline void enable_irq_lockdep(unsigned int irq)
485 #ifdef CONFIG_LOCKDEP
491 static inline void enable_irq_lockdep_irqrestore(unsigned int irq, unsigned long *flags)
493 #ifdef CONFIG_LOCKDEP
494 local_irq_restore(*flags);
499 /* IRQ wakeup (PM) control: */
500 extern int irq_set_irq_wake(unsigned int irq, unsigned int on);
502 static inline int enable_irq_wake(unsigned int irq)
504 return irq_set_irq_wake(irq, 1);
507 static inline int disable_irq_wake(unsigned int irq)
509 return irq_set_irq_wake(irq, 0);
513 * irq_get_irqchip_state/irq_set_irqchip_state specific flags
515 enum irqchip_irq_state {
516 IRQCHIP_STATE_PENDING, /* Is interrupt pending? */
517 IRQCHIP_STATE_ACTIVE, /* Is interrupt in progress? */
518 IRQCHIP_STATE_MASKED, /* Is interrupt masked? */
519 IRQCHIP_STATE_LINE_LEVEL, /* Is IRQ line high? */
522 extern int irq_get_irqchip_state(unsigned int irq, enum irqchip_irq_state which,
524 extern int irq_set_irqchip_state(unsigned int irq, enum irqchip_irq_state which,
527 #ifdef CONFIG_IRQ_FORCED_THREADING
528 # ifdef CONFIG_PREEMPT_RT
529 # define force_irqthreads() (true)
531 DECLARE_STATIC_KEY_FALSE(force_irqthreads_key);
532 # define force_irqthreads() (static_branch_unlikely(&force_irqthreads_key))
535 #define force_irqthreads() (false)
538 #ifndef local_softirq_pending
540 #ifndef local_softirq_pending_ref
541 #define local_softirq_pending_ref irq_stat.__softirq_pending
544 #define local_softirq_pending() (__this_cpu_read(local_softirq_pending_ref))
545 #define set_softirq_pending(x) (__this_cpu_write(local_softirq_pending_ref, (x)))
546 #define or_softirq_pending(x) (__this_cpu_or(local_softirq_pending_ref, (x)))
548 #endif /* local_softirq_pending */
550 /* Some architectures might implement lazy enabling/disabling of
551 * interrupts. In some cases, such as stop_machine, we might want
552 * to ensure that after a local_irq_disable(), interrupts have
553 * really been disabled in hardware. Such architectures need to
554 * implement the following hook.
556 #ifndef hard_irq_disable
557 #define hard_irq_disable() do { } while(0)
560 /* PLEASE, avoid to allocate new softirqs, if you need not _really_ high
561 frequency threaded job scheduling. For almost all the purposes
562 tasklets are more than enough. F.e. all serial device BHs et
563 al. should be converted to tasklets, not to softirqs.
577 RCU_SOFTIRQ, /* Preferable RCU should always be the last softirq */
583 * The following vectors can be safely ignored after ksoftirqd is parked:
586 * 1) rcutree_migrate_callbacks() migrates the queue.
587 * 2) rcu_report_dead() reports the final quiescent states.
589 * _ IRQ_POLL: irq_poll_cpu_dead() migrates the queue
591 #define SOFTIRQ_HOTPLUG_SAFE_MASK (BIT(RCU_SOFTIRQ) | BIT(IRQ_POLL_SOFTIRQ))
593 /* map softirq index to softirq name. update 'softirq_to_name' in
594 * kernel/softirq.c when adding a new softirq.
596 extern const char * const softirq_to_name[NR_SOFTIRQS];
598 /* softirq mask and active fields moved to irq_cpustat_t in
599 * asm/hardirq.h to get better cache usage. KAO
602 struct softirq_action
604 void (*action)(struct softirq_action *);
607 asmlinkage void do_softirq(void);
608 asmlinkage void __do_softirq(void);
610 extern void open_softirq(int nr, void (*action)(struct softirq_action *));
611 extern void softirq_init(void);
612 extern void __raise_softirq_irqoff(unsigned int nr);
614 extern void raise_softirq_irqoff(unsigned int nr);
615 extern void raise_softirq(unsigned int nr);
617 DECLARE_PER_CPU(struct task_struct *, ksoftirqd);
619 static inline struct task_struct *this_cpu_ksoftirqd(void)
621 return this_cpu_read(ksoftirqd);
624 /* Tasklets --- multithreaded analogue of BHs.
626 This API is deprecated. Please consider using threaded IRQs instead:
629 Main feature differing them of generic softirqs: tasklet
630 is running only on one CPU simultaneously.
632 Main feature differing them of BHs: different tasklets
633 may be run simultaneously on different CPUs.
636 * If tasklet_schedule() is called, then tasklet is guaranteed
637 to be executed on some cpu at least once after this.
638 * If the tasklet is already scheduled, but its execution is still not
639 started, it will be executed only once.
640 * If this tasklet is already running on another CPU (or schedule is called
641 from tasklet itself), it is rescheduled for later.
642 * Tasklet is strictly serialized wrt itself, but not
643 wrt another tasklets. If client needs some intertask synchronization,
644 he makes it with spinlocks.
647 struct tasklet_struct
649 struct tasklet_struct *next;
654 void (*func)(unsigned long data);
655 void (*callback)(struct tasklet_struct *t);
660 #define DECLARE_TASKLET(name, _callback) \
661 struct tasklet_struct name = { \
662 .count = ATOMIC_INIT(0), \
663 .callback = _callback, \
664 .use_callback = true, \
667 #define DECLARE_TASKLET_DISABLED(name, _callback) \
668 struct tasklet_struct name = { \
669 .count = ATOMIC_INIT(1), \
670 .callback = _callback, \
671 .use_callback = true, \
674 #define from_tasklet(var, callback_tasklet, tasklet_fieldname) \
675 container_of(callback_tasklet, typeof(*var), tasklet_fieldname)
677 #define DECLARE_TASKLET_OLD(name, _func) \
678 struct tasklet_struct name = { \
679 .count = ATOMIC_INIT(0), \
683 #define DECLARE_TASKLET_DISABLED_OLD(name, _func) \
684 struct tasklet_struct name = { \
685 .count = ATOMIC_INIT(1), \
691 TASKLET_STATE_SCHED, /* Tasklet is scheduled for execution */
692 TASKLET_STATE_RUN /* Tasklet is running (SMP only) */
695 #if defined(CONFIG_SMP) || defined(CONFIG_PREEMPT_RT)
696 static inline int tasklet_trylock(struct tasklet_struct *t)
698 return !test_and_set_bit(TASKLET_STATE_RUN, &(t)->state);
701 void tasklet_unlock(struct tasklet_struct *t);
702 void tasklet_unlock_wait(struct tasklet_struct *t);
703 void tasklet_unlock_spin_wait(struct tasklet_struct *t);
706 static inline int tasklet_trylock(struct tasklet_struct *t) { return 1; }
707 static inline void tasklet_unlock(struct tasklet_struct *t) { }
708 static inline void tasklet_unlock_wait(struct tasklet_struct *t) { }
709 static inline void tasklet_unlock_spin_wait(struct tasklet_struct *t) { }
712 extern void __tasklet_schedule(struct tasklet_struct *t);
714 static inline void tasklet_schedule(struct tasklet_struct *t)
716 if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state))
717 __tasklet_schedule(t);
720 extern void __tasklet_hi_schedule(struct tasklet_struct *t);
722 static inline void tasklet_hi_schedule(struct tasklet_struct *t)
724 if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state))
725 __tasklet_hi_schedule(t);
728 static inline void tasklet_disable_nosync(struct tasklet_struct *t)
730 atomic_inc(&t->count);
731 smp_mb__after_atomic();
735 * Do not use in new code. Disabling tasklets from atomic contexts is
736 * error prone and should be avoided.
738 static inline void tasklet_disable_in_atomic(struct tasklet_struct *t)
740 tasklet_disable_nosync(t);
741 tasklet_unlock_spin_wait(t);
745 static inline void tasklet_disable(struct tasklet_struct *t)
747 tasklet_disable_nosync(t);
748 tasklet_unlock_wait(t);
752 static inline void tasklet_enable(struct tasklet_struct *t)
754 smp_mb__before_atomic();
755 atomic_dec(&t->count);
758 extern void tasklet_kill(struct tasklet_struct *t);
759 extern void tasklet_init(struct tasklet_struct *t,
760 void (*func)(unsigned long), unsigned long data);
761 extern void tasklet_setup(struct tasklet_struct *t,
762 void (*callback)(struct tasklet_struct *));
765 * Autoprobing for irqs:
767 * probe_irq_on() and probe_irq_off() provide robust primitives
768 * for accurate IRQ probing during kernel initialization. They are
769 * reasonably simple to use, are not "fooled" by spurious interrupts,
770 * and, unlike other attempts at IRQ probing, they do not get hung on
771 * stuck interrupts (such as unused PS2 mouse interfaces on ASUS boards).
773 * For reasonably foolproof probing, use them as follows:
775 * 1. clear and/or mask the device's internal interrupt.
777 * 3. irqs = probe_irq_on(); // "take over" all unassigned idle IRQs
778 * 4. enable the device and cause it to trigger an interrupt.
779 * 5. wait for the device to interrupt, using non-intrusive polling or a delay.
780 * 6. irq = probe_irq_off(irqs); // get IRQ number, 0=none, negative=multiple
781 * 7. service the device to clear its pending interrupt.
782 * 8. loop again if paranoia is required.
784 * probe_irq_on() returns a mask of allocated irq's.
786 * probe_irq_off() takes the mask as a parameter,
787 * and returns the irq number which occurred,
788 * or zero if none occurred, or a negative irq number
789 * if more than one irq occurred.
792 #if !defined(CONFIG_GENERIC_IRQ_PROBE)
793 static inline unsigned long probe_irq_on(void)
797 static inline int probe_irq_off(unsigned long val)
801 static inline unsigned int probe_irq_mask(unsigned long val)
806 extern unsigned long probe_irq_on(void); /* returns 0 on failure */
807 extern int probe_irq_off(unsigned long); /* returns 0 or negative on failure */
808 extern unsigned int probe_irq_mask(unsigned long); /* returns mask of ISA interrupts */
811 #ifdef CONFIG_PROC_FS
812 /* Initialize /proc/irq/ */
813 extern void init_irq_proc(void);
815 static inline void init_irq_proc(void)
820 #ifdef CONFIG_IRQ_TIMINGS
821 void irq_timings_enable(void);
822 void irq_timings_disable(void);
823 u64 irq_timings_next_event(u64 now);
827 int show_interrupts(struct seq_file *p, void *v);
828 int arch_show_interrupts(struct seq_file *p, int prec);
830 extern int early_irq_init(void);
831 extern int arch_probe_nr_irqs(void);
832 extern int arch_early_irq_init(void);
835 * We want to know which function is an entrypoint of a hardirq or a softirq.
838 # define __irq_entry __section(".irqentry.text")
841 #define __softirq_entry __section(".softirqentry.text")