]> Git Repo - linux.git/blob - drivers/platform/x86/p2sb.c
drm/i915: Use REG_BIT() & co. for AUX CH registers
[linux.git] / drivers / platform / x86 / p2sb.c
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Primary to Sideband (P2SB) bridge access support
4  *
5  * Copyright (c) 2017, 2021-2022 Intel Corporation.
6  *
7  * Authors: Andy Shevchenko <[email protected]>
8  *          Jonathan Yong <[email protected]>
9  */
10
11 #include <linux/bits.h>
12 #include <linux/export.h>
13 #include <linux/pci.h>
14 #include <linux/platform_data/x86/p2sb.h>
15
16 #include <asm/cpu_device_id.h>
17 #include <asm/intel-family.h>
18
19 #define P2SBC                   0xe0
20 #define P2SBC_HIDE              BIT(8)
21
22 #define P2SB_DEVFN_DEFAULT      PCI_DEVFN(31, 1)
23
24 static const struct x86_cpu_id p2sb_cpu_ids[] = {
25         X86_MATCH_INTEL_FAM6_MODEL(ATOM_GOLDMONT,       PCI_DEVFN(13, 0)),
26         {}
27 };
28
29 static int p2sb_get_devfn(unsigned int *devfn)
30 {
31         unsigned int fn = P2SB_DEVFN_DEFAULT;
32         const struct x86_cpu_id *id;
33
34         id = x86_match_cpu(p2sb_cpu_ids);
35         if (id)
36                 fn = (unsigned int)id->driver_data;
37
38         *devfn = fn;
39         return 0;
40 }
41
42 /* Copy resource from the first BAR of the device in question */
43 static int p2sb_read_bar0(struct pci_dev *pdev, struct resource *mem)
44 {
45         struct resource *bar0 = &pdev->resource[0];
46
47         /* Make sure we have no dangling pointers in the output */
48         memset(mem, 0, sizeof(*mem));
49
50         /*
51          * We copy only selected fields from the original resource.
52          * Because a PCI device will be removed soon, we may not use
53          * any allocated data, hence we may not copy any pointers.
54          */
55         mem->start = bar0->start;
56         mem->end = bar0->end;
57         mem->flags = bar0->flags;
58         mem->desc = bar0->desc;
59
60         return 0;
61 }
62
63 static int p2sb_scan_and_read(struct pci_bus *bus, unsigned int devfn, struct resource *mem)
64 {
65         struct pci_dev *pdev;
66         int ret;
67
68         pdev = pci_scan_single_device(bus, devfn);
69         if (!pdev)
70                 return -ENODEV;
71
72         ret = p2sb_read_bar0(pdev, mem);
73
74         pci_stop_and_remove_bus_device(pdev);
75         return ret;
76 }
77
78 /**
79  * p2sb_bar - Get Primary to Sideband (P2SB) bridge device BAR
80  * @bus: PCI bus to communicate with
81  * @devfn: PCI slot and function to communicate with
82  * @mem: memory resource to be filled in
83  *
84  * The BIOS prevents the P2SB device from being enumerated by the PCI
85  * subsystem, so we need to unhide and hide it back to lookup the BAR.
86  *
87  * if @bus is NULL, the bus 0 in domain 0 will be used.
88  * If @devfn is 0, it will be replaced by devfn of the P2SB device.
89  *
90  * Caller must provide a valid pointer to @mem.
91  *
92  * Locking is handled by pci_rescan_remove_lock mutex.
93  *
94  * Return:
95  * 0 on success or appropriate errno value on error.
96  */
97 int p2sb_bar(struct pci_bus *bus, unsigned int devfn, struct resource *mem)
98 {
99         struct pci_dev *pdev_p2sb;
100         unsigned int devfn_p2sb;
101         u32 value = P2SBC_HIDE;
102         int ret;
103
104         /* Get devfn for P2SB device itself */
105         ret = p2sb_get_devfn(&devfn_p2sb);
106         if (ret)
107                 return ret;
108
109         /* if @bus is NULL, use bus 0 in domain 0 */
110         bus = bus ?: pci_find_bus(0, 0);
111
112         /*
113          * Prevent concurrent PCI bus scan from seeing the P2SB device and
114          * removing via sysfs while it is temporarily exposed.
115          */
116         pci_lock_rescan_remove();
117
118         /* Unhide the P2SB device, if needed */
119         pci_bus_read_config_dword(bus, devfn_p2sb, P2SBC, &value);
120         if (value & P2SBC_HIDE)
121                 pci_bus_write_config_dword(bus, devfn_p2sb, P2SBC, 0);
122
123         pdev_p2sb = pci_scan_single_device(bus, devfn_p2sb);
124         if (devfn)
125                 ret = p2sb_scan_and_read(bus, devfn, mem);
126         else
127                 ret = p2sb_read_bar0(pdev_p2sb, mem);
128         pci_stop_and_remove_bus_device(pdev_p2sb);
129
130         /* Hide the P2SB device, if it was hidden */
131         if (value & P2SBC_HIDE)
132                 pci_bus_write_config_dword(bus, devfn_p2sb, P2SBC, P2SBC_HIDE);
133
134         pci_unlock_rescan_remove();
135
136         if (ret)
137                 return ret;
138
139         if (mem->flags == 0)
140                 return -ENODEV;
141
142         return 0;
143 }
144 EXPORT_SYMBOL_GPL(p2sb_bar);
This page took 0.037657 seconds and 4 git commands to generate.