drivers/regulator/rk808-regulator.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Regulator driver for Rockchip RK805/RK808/RK818
   4  *
   5  * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
   6  * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
   7  *
   8  * Author: Chris Zhong <[email protected]>
   9  * Author: Zhang Qing <[email protected]>
  10  * Author: Xu Shengfei <[email protected]>
  11  *
  12  * Copyright (C) 2016 PHYTEC Messtechnik GmbH
  13  *
  14  * Author: Wadim Egorov <[email protected]>
  15  */
  16
  17 #include <linux/delay.h>
  18 #include <linux/gpio.h>
  19 #include <linux/module.h>
  20 #include <linux/of_device.h>
  21 #include <linux/of_gpio.h>
  22 #include <linux/mfd/rk808.h>
  23 #include <linux/regulator/driver.h>
  24 #include <linux/regulator/of_regulator.h>
  25 #include <linux/gpio/consumer.h>
  26
  27 /* Field Definitions */
  28 #define RK808_BUCK_VSEL_MASK    0x3f
  29 #define RK808_BUCK4_VSEL_MASK   0xf
  30 #define RK808_LDO_VSEL_MASK     0x1f
  31
  32 #define RK809_BUCK5_VSEL_MASK           0x7
  33
  34 #define RK817_LDO_VSEL_MASK             0x7f
  35 #define RK817_BOOST_VSEL_MASK           0x7
  36 #define RK817_BUCK_VSEL_MASK            0x7f
  37
  38 #define RK818_BUCK_VSEL_MASK            0x3f
  39 #define RK818_BUCK4_VSEL_MASK           0x1f
  40 #define RK818_LDO_VSEL_MASK             0x1f
  41 #define RK818_LDO3_ON_VSEL_MASK         0xf
  42 #define RK818_BOOST_ON_VSEL_MASK        0xe0
  43
  44 #define RK806_DCDC_SLP_REG_OFFSET       0x0A
  45 #define RK806_NLDO_SLP_REG_OFFSET       0x05
  46 #define RK806_PLDO_SLP_REG_OFFSET       0x06
  47
  48 #define RK806_BUCK_SEL_CNT              0xff
  49 #define RK806_LDO_SEL_CNT               0xff
  50
  51 /* Ramp rate definitions for buck1 / buck2 only */
  52 #define RK808_RAMP_RATE_OFFSET          3
  53 #define RK808_RAMP_RATE_MASK            (3 << RK808_RAMP_RATE_OFFSET)
  54 #define RK808_RAMP_RATE_2MV_PER_US      (0 << RK808_RAMP_RATE_OFFSET)
  55 #define RK808_RAMP_RATE_4MV_PER_US      (1 << RK808_RAMP_RATE_OFFSET)
  56 #define RK808_RAMP_RATE_6MV_PER_US      (2 << RK808_RAMP_RATE_OFFSET)
  57 #define RK808_RAMP_RATE_10MV_PER_US     (3 << RK808_RAMP_RATE_OFFSET)
  58
  59 #define RK808_DVS2_POL          BIT(2)
  60 #define RK808_DVS1_POL          BIT(1)
  61
  62 /* Offset from XXX_ON_VSEL to XXX_SLP_VSEL */
  63 #define RK808_SLP_REG_OFFSET 1
  64
  65 /* Offset from XXX_ON_VSEL to XXX_DVS_VSEL */
  66 #define RK808_DVS_REG_OFFSET 2
  67
  68 /* Offset from XXX_EN_REG to SLEEP_SET_OFF_XXX */
  69 #define RK808_SLP_SET_OFF_REG_OFFSET 2
  70
  71 /* max steps for increase voltage of Buck1/2, equal 100mv*/
  72 #define MAX_STEPS_ONE_TIME 8
  73
  74 #define ENABLE_MASK(id)                 (BIT(id) | BIT(4 + (id)))
  75 #define DISABLE_VAL(id)                 (BIT(4 + (id)))
  76
  77 #define RK817_BOOST_DESC(_id, _match, _supply, _min, _max, _step, _vreg,\
  78         _vmask, _ereg, _emask, _enval, _disval, _etime, m_drop)         \
  79         {                                                       \
  80                 .name           = (_match),                             \
  81                 .supply_name    = (_supply),                            \
  82                 .of_match       = of_match_ptr(_match),                 \
  83                 .regulators_node = of_match_ptr("regulators"),          \
  84                 .type           = REGULATOR_VOLTAGE,                    \
  85                 .id             = (_id),                                \
  86                 .n_voltages     = (((_max) - (_min)) / (_step) + 1),    \
  87                 .owner          = THIS_MODULE,                          \
  88                 .min_uV         = (_min) * 1000,                        \
  89                 .uV_step        = (_step) * 1000,                       \
  90                 .vsel_reg       = (_vreg),                              \
  91                 .vsel_mask      = (_vmask),                             \
  92                 .enable_reg     = (_ereg),                              \
  93                 .enable_mask    = (_emask),                             \
  94                 .enable_val     = (_enval),                             \
  95                 .disable_val     = (_disval),                           \
  96                 .enable_time    = (_etime),                             \
  97                 .min_dropout_uV = (m_drop) * 1000,                      \
  98                 .ops            = &rk817_boost_ops,                     \
  99         }
 100
 101 #define RK8XX_DESC_COM(_id, _match, _supply, _min, _max, _step, _vreg,  \
 102         _vmask, _ereg, _emask, _enval, _disval, _etime, _ops)           \
 103         {                                                               \
 104                 .name           = (_match),                             \
 105                 .supply_name    = (_supply),                            \
 106                 .of_match       = of_match_ptr(_match),                 \
 107                 .regulators_node = of_match_ptr("regulators"),          \
 108                 .type           = REGULATOR_VOLTAGE,                    \
 109                 .id             = (_id),                                \
 110                 .n_voltages     = (((_max) - (_min)) / (_step) + 1),    \
 111                 .owner          = THIS_MODULE,                          \
 112                 .min_uV         = (_min) * 1000,                        \
 113                 .uV_step        = (_step) * 1000,                       \
 114                 .vsel_reg       = (_vreg),                              \
 115                 .vsel_mask      = (_vmask),                             \
 116                 .enable_reg     = (_ereg),                              \
 117                 .enable_mask    = (_emask),                             \
 118                 .enable_val     = (_enval),                             \
 119                 .disable_val     = (_disval),                           \
 120                 .enable_time    = (_etime),                             \
 121                 .ops            = _ops,                 \
 122         }
 123
 124 #define RK805_DESC(_id, _match, _supply, _min, _max, _step, _vreg,      \
 125         _vmask, _ereg, _emask, _etime)                                  \
 126         RK8XX_DESC_COM(_id, _match, _supply, _min, _max, _step, _vreg,  \
 127         _vmask, _ereg, _emask, 0, 0, _etime, &rk805_reg_ops)
 128
 129 #define RK806_REGULATOR(_name, _supply_name, _id, _ops,\
 130                         _n_voltages, _vr, _er, _lr, ctrl_bit,\
 131                         _rr, _rm, _rt)\
 132 [_id] = {\
 133                 .name = _name,\
 134                 .supply_name = _supply_name,\
 135                 .of_match = of_match_ptr(_name),\
 136                 .regulators_node = of_match_ptr("regulators"),\
 137                 .id = _id,\
 138                 .ops = &_ops,\
 139                 .type = REGULATOR_VOLTAGE,\
 140                 .n_voltages = _n_voltages,\
 141                 .linear_ranges = _lr,\
 142                 .n_linear_ranges = ARRAY_SIZE(_lr),\
 143                 .vsel_reg = _vr,\
 144                 .vsel_mask = 0xff,\
 145                 .enable_reg = _er,\
 146                 .enable_mask = ENABLE_MASK(ctrl_bit),\
 147                 .enable_val = ENABLE_MASK(ctrl_bit),\
 148                 .disable_val = DISABLE_VAL(ctrl_bit),\
 149                 .of_map_mode = rk8xx_regulator_of_map_mode,\
 150                 .ramp_reg = _rr,\
 151                 .ramp_mask = _rm,\
 152                 .ramp_delay_table = _rt, \
 153                 .n_ramp_values = ARRAY_SIZE(_rt), \
 154                 .owner = THIS_MODULE,\
 155         }
 156
 157 #define RK8XX_DESC(_id, _match, _supply, _min, _max, _step, _vreg,      \
 158         _vmask, _ereg, _emask, _etime)                                  \
 159         RK8XX_DESC_COM(_id, _match, _supply, _min, _max, _step, _vreg,  \
 160         _vmask, _ereg, _emask, 0, 0, _etime, &rk808_reg_ops)
 161
 162 #define RK817_DESC(_id, _match, _supply, _min, _max, _step, _vreg,      \
 163         _vmask, _ereg, _emask, _disval, _etime)                         \
 164         RK8XX_DESC_COM(_id, _match, _supply, _min, _max, _step, _vreg,  \
 165         _vmask, _ereg, _emask, _emask, _disval, _etime, &rk817_reg_ops)
 166
 167 #define RKXX_DESC_SWITCH_COM(_id, _match, _supply, _ereg, _emask,       \
 168         _enval, _disval, _ops)                                          \
 169         {                                                               \
 170                 .name           = (_match),                             \
 171                 .supply_name    = (_supply),                            \
 172                 .of_match       = of_match_ptr(_match),                 \
 173                 .regulators_node = of_match_ptr("regulators"),          \
 174                 .type           = REGULATOR_VOLTAGE,                    \
 175                 .id             = (_id),                                \
 176                 .enable_reg     = (_ereg),                              \
 177                 .enable_mask    = (_emask),                             \
 178                 .enable_val     = (_enval),                             \
 179                 .disable_val     = (_disval),                           \
 180                 .owner          = THIS_MODULE,                          \
 181                 .ops            = _ops                                  \
 182         }
 183
 184 #define RK817_DESC_SWITCH(_id, _match, _supply, _ereg, _emask,          \
 185         _disval)                                                        \
 186         RKXX_DESC_SWITCH_COM(_id, _match, _supply, _ereg, _emask,       \
 187         _emask, _disval, &rk817_switch_ops)
 188
 189 #define RK8XX_DESC_SWITCH(_id, _match, _supply, _ereg, _emask)          \
 190         RKXX_DESC_SWITCH_COM(_id, _match, _supply, _ereg, _emask,       \
 191         0, 0, &rk808_switch_ops)
 192
 193 struct rk8xx_register_bit {
 194         u8 reg;
 195         u8 bit;
 196 };
 197
 198 #define RK8XX_REG_BIT(_reg, _bit)                                       \
 199         {                                                               \
 200                 .reg = _reg,                                            \
 201                 .bit = BIT(_bit),                                               \
 202         }
 203
 204 struct rk808_regulator_data {
 205         struct gpio_desc *dvs_gpio[2];
 206 };
 207
 208 static const struct linear_range rk808_ldo3_voltage_ranges[] = {
 209         REGULATOR_LINEAR_RANGE(800000, 0, 13, 100000),
 210         REGULATOR_LINEAR_RANGE(2500000, 15, 15, 0),
 211 };
 212
 213 #define RK809_BUCK5_SEL_CNT             (8)
 214
 215 static const struct linear_range rk809_buck5_voltage_ranges[] = {
 216         REGULATOR_LINEAR_RANGE(1500000, 0, 0, 0),
 217         REGULATOR_LINEAR_RANGE(1800000, 1, 3, 200000),
 218         REGULATOR_LINEAR_RANGE(2800000, 4, 5, 200000),
 219         REGULATOR_LINEAR_RANGE(3300000, 6, 7, 300000),
 220 };
 221
 222 #define RK817_BUCK1_MIN0 500000
 223 #define RK817_BUCK1_MAX0 1500000
 224
 225 #define RK817_BUCK1_MIN1 1600000
 226 #define RK817_BUCK1_MAX1 2400000
 227
 228 #define RK817_BUCK3_MAX1 3400000
 229
 230 #define RK817_BUCK1_STP0 12500
 231 #define RK817_BUCK1_STP1 100000
 232
 233 #define RK817_BUCK1_SEL0 ((RK817_BUCK1_MAX0 - RK817_BUCK1_MIN0) /\
 234                                                   RK817_BUCK1_STP0)
 235 #define RK817_BUCK1_SEL1 ((RK817_BUCK1_MAX1 - RK817_BUCK1_MIN1) /\
 236                                                   RK817_BUCK1_STP1)
 237
 238 #define RK817_BUCK3_SEL1 ((RK817_BUCK3_MAX1 - RK817_BUCK1_MIN1) /\
 239                                                   RK817_BUCK1_STP1)
 240
 241 #define RK817_BUCK1_SEL_CNT (RK817_BUCK1_SEL0 + RK817_BUCK1_SEL1 + 1)
 242 #define RK817_BUCK3_SEL_CNT (RK817_BUCK1_SEL0 + RK817_BUCK3_SEL1 + 1)
 243
 244 static const struct linear_range rk817_buck1_voltage_ranges[] = {
 245         REGULATOR_LINEAR_RANGE(RK817_BUCK1_MIN0, 0,
 246                                RK817_BUCK1_SEL0, RK817_BUCK1_STP0),
 247         REGULATOR_LINEAR_RANGE(RK817_BUCK1_MIN1, RK817_BUCK1_SEL0 + 1,
 248                                RK817_BUCK1_SEL_CNT, RK817_BUCK1_STP1),
 249 };
 250
 251 static const struct linear_range rk817_buck3_voltage_ranges[] = {
 252         REGULATOR_LINEAR_RANGE(RK817_BUCK1_MIN0, 0,
 253                                RK817_BUCK1_SEL0, RK817_BUCK1_STP0),
 254         REGULATOR_LINEAR_RANGE(RK817_BUCK1_MIN1, RK817_BUCK1_SEL0 + 1,
 255                                RK817_BUCK3_SEL_CNT, RK817_BUCK1_STP1),
 256 };
 257
 258 static const unsigned int rk808_buck1_2_ramp_table[] = {
 259         2000, 4000, 6000, 10000
 260 };
 261
 262 /* RK817 RK809 */
 263 static const unsigned int rk817_buck1_4_ramp_table[] = {
 264         3000, 6300, 12500, 25000
 265 };
 266
 267 static int rk806_set_mode_dcdc(struct regulator_dev *rdev, unsigned int mode)
 268 {
 269         int rid = rdev_get_id(rdev);
 270         int ctr_bit, reg;
 271
 272         reg = RK806_POWER_FPWM_EN0 + rid / 8;
 273         ctr_bit = rid % 8;
 274
 275         switch (mode) {
 276         case REGULATOR_MODE_FAST:
 277                 return regmap_update_bits(rdev->regmap, reg,
 278                                           PWM_MODE_MSK << ctr_bit,
 279                                           FPWM_MODE << ctr_bit);
 280         case REGULATOR_MODE_NORMAL:
 281                 return regmap_update_bits(rdev->regmap, reg,
 282                                           PWM_MODE_MSK << ctr_bit,
 283                                           AUTO_PWM_MODE << ctr_bit);
 284         default:
 285                 dev_err(rdev_get_dev(rdev), "mode unsupported: %u\n", mode);
 286                 return -EINVAL;
 287         }
 288
 289         return 0;
 290 }
 291
 292 static unsigned int rk806_get_mode_dcdc(struct regulator_dev *rdev)
 293 {
 294         int rid = rdev_get_id(rdev);
 295         int ctr_bit, reg;
 296         unsigned int val;
 297         int err;
 298
 299         reg = RK806_POWER_FPWM_EN0 + rid / 8;
 300         ctr_bit = rid % 8;
 301
 302         err = regmap_read(rdev->regmap, reg, &val);
 303         if (err)
 304                 return err;
 305
 306         if ((val >> ctr_bit) & FPWM_MODE)
 307                 return REGULATOR_MODE_FAST;
 308         else
 309                 return REGULATOR_MODE_NORMAL;
 310 }
 311
 312 static const struct rk8xx_register_bit rk806_dcdc_rate2[] = {
 313         RK8XX_REG_BIT(0xEB, 0),
 314         RK8XX_REG_BIT(0xEB, 1),
 315         RK8XX_REG_BIT(0xEB, 2),
 316         RK8XX_REG_BIT(0xEB, 3),
 317         RK8XX_REG_BIT(0xEB, 4),
 318         RK8XX_REG_BIT(0xEB, 5),
 319         RK8XX_REG_BIT(0xEB, 6),
 320         RK8XX_REG_BIT(0xEB, 7),
 321         RK8XX_REG_BIT(0xEA, 0),
 322         RK8XX_REG_BIT(0xEA, 1),
 323 };
 324
 325 static const unsigned int rk806_ramp_delay_table_dcdc[] = {
 326         50000, 25000, 12500, 6250, 3125, 1560, 961, 390
 327 };
 328
 329 static int rk806_set_ramp_delay_dcdc(struct regulator_dev *rdev, int ramp_delay)
 330 {
 331         int rid = rdev_get_id(rdev);
 332         int regval, ramp_value, ret;
 333
 334         ret = regulator_find_closest_bigger(ramp_delay, rdev->desc->ramp_delay_table,
 335                                             rdev->desc->n_ramp_values, &ramp_value);
 336         if (ret) {
 337                 dev_warn(rdev_get_dev(rdev),
 338                          "Can't set ramp-delay %u, setting %u\n", ramp_delay,
 339                          rdev->desc->ramp_delay_table[ramp_value]);
 340         }
 341
 342         regval = ramp_value << (ffs(rdev->desc->ramp_mask) - 1);
 343
 344         ret = regmap_update_bits(rdev->regmap, rdev->desc->ramp_reg,
 345                                  rdev->desc->ramp_mask, regval);
 346         if (ret)
 347                 return ret;
 348
 349         /*
 350          * The above is effectively a copy of regulator_set_ramp_delay_regmap(),
 351          * but that only stores the lower 2 bits for rk806 DCDC ramp. The MSB must
 352          * be stored in a separate register, so this open codes the implementation
 353          * to have access to the ramp_value.
 354          */
 355
 356         regval = (ramp_value >> 2) & 0x1 ? rk806_dcdc_rate2[rid].bit : 0;
 357         return regmap_update_bits(rdev->regmap, rk806_dcdc_rate2[rid].reg,
 358                                   rk806_dcdc_rate2[rid].bit,
 359                                   regval);
 360 }
 361
 362 static const unsigned int rk806_ramp_delay_table_ldo[] = {
 363         100000, 50000, 25000, 12500, 6280, 3120, 1900, 780
 364 };
 365
 366 static int rk806_set_suspend_voltage_range(struct regulator_dev *rdev, int reg_offset, int uv)
 367 {
 368         int sel = regulator_map_voltage_linear_range(rdev, uv, uv);
 369         unsigned int reg;
 370
 371         if (sel < 0)
 372                 return -EINVAL;
 373
 374         reg = rdev->desc->vsel_reg + reg_offset;
 375
 376         return regmap_update_bits(rdev->regmap, reg, rdev->desc->vsel_mask, sel);
 377 }
 378
 379 static int rk806_set_suspend_voltage_range_dcdc(struct regulator_dev *rdev, int uv)
 380 {
 381         return rk806_set_suspend_voltage_range(rdev, RK806_DCDC_SLP_REG_OFFSET, uv);
 382 }
 383
 384 static int rk806_set_suspend_voltage_range_nldo(struct regulator_dev *rdev, int uv)
 385 {
 386         return rk806_set_suspend_voltage_range(rdev, RK806_NLDO_SLP_REG_OFFSET, uv);
 387 }
 388
 389 static int rk806_set_suspend_voltage_range_pldo(struct regulator_dev *rdev, int uv)
 390 {
 391         return rk806_set_suspend_voltage_range(rdev, RK806_PLDO_SLP_REG_OFFSET, uv);
 392 }
 393
 394 static int rk808_buck1_2_get_voltage_sel_regmap(struct regulator_dev *rdev)
 395 {
 396         struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
 397         int id = rdev_get_id(rdev);
 398         struct gpio_desc *gpio = pdata->dvs_gpio[id];
 399         unsigned int val;
 400         int ret;
 401
 402         if (!gpio || gpiod_get_value(gpio) == 0)
 403                 return regulator_get_voltage_sel_regmap(rdev);
 404
 405         ret = regmap_read(rdev->regmap,
 406                           rdev->desc->vsel_reg + RK808_DVS_REG_OFFSET,
 407                           &val);
 408         if (ret != 0)
 409                 return ret;
 410
 411         val &= rdev->desc->vsel_mask;
 412         val >>= ffs(rdev->desc->vsel_mask) - 1;
 413
 414         return val;
 415 }
 416
 417 static int rk808_buck1_2_i2c_set_voltage_sel(struct regulator_dev *rdev,
 418                                              unsigned sel)
 419 {
 420         int ret, delta_sel;
 421         unsigned int old_sel, tmp, val, mask = rdev->desc->vsel_mask;
 422
 423         ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &val);
 424         if (ret != 0)
 425                 return ret;
 426
 427         tmp = val & ~mask;
 428         old_sel = val & mask;
 429         old_sel >>= ffs(mask) - 1;
 430         delta_sel = sel - old_sel;
 431
 432         /*
 433          * If directly modify the register to change the voltage, we will face
 434          * the risk of overshoot. Put it into a multi-step, can effectively
 435          * avoid this problem, a step is 100mv here.
 436          */
 437         while (delta_sel > MAX_STEPS_ONE_TIME) {
 438                 old_sel += MAX_STEPS_ONE_TIME;
 439                 val = old_sel << (ffs(mask) - 1);
 440                 val |= tmp;
 441
 442                 /*
 443                  * i2c is 400kHz (2.5us per bit) and we must transmit _at least_
 444                  * 3 bytes (24 bits) plus start and stop so 26 bits.  So we've
 445                  * got more than 65 us between each voltage change and thus
 446                  * won't ramp faster than ~1500 uV / us.
 447                  */
 448                 ret = regmap_write(rdev->regmap, rdev->desc->vsel_reg, val);
 449                 delta_sel = sel - old_sel;
 450         }
 451
 452         sel <<= ffs(mask) - 1;
 453         val = tmp | sel;
 454         ret = regmap_write(rdev->regmap, rdev->desc->vsel_reg, val);
 455
 456         /*
 457          * When we change the voltage register directly, the ramp rate is about
 458          * 100000uv/us, wait 1us to make sure the target voltage to be stable,
 459          * so we needn't wait extra time after that.
 460          */
 461         udelay(1);
 462
 463         return ret;
 464 }
 465
 466 static int rk808_buck1_2_set_voltage_sel(struct regulator_dev *rdev,
 467                                          unsigned sel)
 468 {
 469         struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
 470         int id = rdev_get_id(rdev);
 471         struct gpio_desc *gpio = pdata->dvs_gpio[id];
 472         unsigned int reg = rdev->desc->vsel_reg;
 473         unsigned old_sel;
 474         int ret, gpio_level;
 475
 476         if (!gpio)
 477                 return rk808_buck1_2_i2c_set_voltage_sel(rdev, sel);
 478
 479         gpio_level = gpiod_get_value(gpio);
 480         if (gpio_level == 0) {
 481                 reg += RK808_DVS_REG_OFFSET;
 482                 ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &old_sel);
 483         } else {
 484                 ret = regmap_read(rdev->regmap,
 485                                   reg + RK808_DVS_REG_OFFSET,
 486                                   &old_sel);
 487         }
 488
 489         if (ret != 0)
 490                 return ret;
 491
 492         sel <<= ffs(rdev->desc->vsel_mask) - 1;
 493         sel |= old_sel & ~rdev->desc->vsel_mask;
 494
 495         ret = regmap_write(rdev->regmap, reg, sel);
 496         if (ret)
 497                 return ret;
 498
 499         gpiod_set_value(gpio, !gpio_level);
 500
 501         return ret;
 502 }
 503
 504 static int rk808_buck1_2_set_voltage_time_sel(struct regulator_dev *rdev,
 505                                        unsigned int old_selector,
 506                                        unsigned int new_selector)
 507 {
 508         struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
 509         int id = rdev_get_id(rdev);
 510         struct gpio_desc *gpio = pdata->dvs_gpio[id];
 511
 512         /* if there is no dvs1/2 pin, we don't need wait extra time here. */
 513         if (!gpio)
 514                 return 0;
 515
 516         return regulator_set_voltage_time_sel(rdev, old_selector, new_selector);
 517 }
 518
 519 static int rk808_set_suspend_voltage(struct regulator_dev *rdev, int uv)
 520 {
 521         unsigned int reg;
 522         int sel = regulator_map_voltage_linear(rdev, uv, uv);
 523
 524         if (sel < 0)
 525                 return -EINVAL;
 526
 527         reg = rdev->desc->vsel_reg + RK808_SLP_REG_OFFSET;
 528
 529         return regmap_update_bits(rdev->regmap, reg,
 530                                   rdev->desc->vsel_mask,
 531                                   sel);
 532 }
 533
 534 static int rk808_set_suspend_voltage_range(struct regulator_dev *rdev, int uv)
 535 {
 536         unsigned int reg;
 537         int sel = regulator_map_voltage_linear_range(rdev, uv, uv);
 538
 539         if (sel < 0)
 540                 return -EINVAL;
 541
 542         reg = rdev->desc->vsel_reg + RK808_SLP_REG_OFFSET;
 543
 544         return regmap_update_bits(rdev->regmap, reg,
 545                                   rdev->desc->vsel_mask,
 546                                   sel);
 547 }
 548
 549 static int rk805_set_suspend_enable(struct regulator_dev *rdev)
 550 {
 551         unsigned int reg;
 552
 553         reg = rdev->desc->enable_reg + RK808_SLP_SET_OFF_REG_OFFSET;
 554
 555         return regmap_update_bits(rdev->regmap, reg,
 556                                   rdev->desc->enable_mask,
 557                                   rdev->desc->enable_mask);
 558 }
 559
 560 static int rk805_set_suspend_disable(struct regulator_dev *rdev)
 561 {
 562         unsigned int reg;
 563
 564         reg = rdev->desc->enable_reg + RK808_SLP_SET_OFF_REG_OFFSET;
 565
 566         return regmap_update_bits(rdev->regmap, reg,
 567                                   rdev->desc->enable_mask,
 568                                   0);
 569 }
 570
 571 static const struct rk8xx_register_bit rk806_suspend_bits[] = {
 572         RK8XX_REG_BIT(RK806_POWER_SLP_EN0, 0),
 573         RK8XX_REG_BIT(RK806_POWER_SLP_EN0, 1),
 574         RK8XX_REG_BIT(RK806_POWER_SLP_EN0, 2),
 575         RK8XX_REG_BIT(RK806_POWER_SLP_EN0, 3),
 576         RK8XX_REG_BIT(RK806_POWER_SLP_EN0, 4),
 577         RK8XX_REG_BIT(RK806_POWER_SLP_EN0, 5),
 578         RK8XX_REG_BIT(RK806_POWER_SLP_EN0, 6),
 579         RK8XX_REG_BIT(RK806_POWER_SLP_EN0, 7),
 580         RK8XX_REG_BIT(RK806_POWER_SLP_EN1, 6),
 581         RK8XX_REG_BIT(RK806_POWER_SLP_EN1, 7),
 582         RK8XX_REG_BIT(RK806_POWER_SLP_EN1, 0),
 583         RK8XX_REG_BIT(RK806_POWER_SLP_EN1, 1),
 584         RK8XX_REG_BIT(RK806_POWER_SLP_EN1, 2),
 585         RK8XX_REG_BIT(RK806_POWER_SLP_EN1, 3),
 586         RK8XX_REG_BIT(RK806_POWER_SLP_EN1, 4),
 587         RK8XX_REG_BIT(RK806_POWER_SLP_EN2, 1),
 588         RK8XX_REG_BIT(RK806_POWER_SLP_EN2, 2),
 589         RK8XX_REG_BIT(RK806_POWER_SLP_EN2, 3),
 590         RK8XX_REG_BIT(RK806_POWER_SLP_EN2, 4),
 591         RK8XX_REG_BIT(RK806_POWER_SLP_EN2, 5),
 592         RK8XX_REG_BIT(RK806_POWER_SLP_EN2, 0),
 593 };
 594
 595 static int rk806_set_suspend_enable(struct regulator_dev *rdev)
 596 {
 597         int rid = rdev_get_id(rdev);
 598
 599         return regmap_update_bits(rdev->regmap, rk806_suspend_bits[rid].reg,
 600                                   rk806_suspend_bits[rid].bit,
 601                                   rk806_suspend_bits[rid].bit);
 602 }
 603
 604 static int rk806_set_suspend_disable(struct regulator_dev *rdev)
 605 {
 606         int rid = rdev_get_id(rdev);
 607
 608         return regmap_update_bits(rdev->regmap, rk806_suspend_bits[rid].reg,
 609                                   rk806_suspend_bits[rid].bit, 0);
 610 }
 611
 612 static int rk808_set_suspend_enable(struct regulator_dev *rdev)
 613 {
 614         unsigned int reg;
 615
 616         reg = rdev->desc->enable_reg + RK808_SLP_SET_OFF_REG_OFFSET;
 617
 618         return regmap_update_bits(rdev->regmap, reg,
 619                                   rdev->desc->enable_mask,
 620                                   0);
 621 }
 622
 623 static int rk808_set_suspend_disable(struct regulator_dev *rdev)
 624 {
 625         unsigned int reg;
 626
 627         reg = rdev->desc->enable_reg + RK808_SLP_SET_OFF_REG_OFFSET;
 628
 629         return regmap_update_bits(rdev->regmap, reg,
 630                                   rdev->desc->enable_mask,
 631                                   rdev->desc->enable_mask);
 632 }
 633
 634 static int rk817_set_suspend_enable_ctrl(struct regulator_dev *rdev,
 635                                          unsigned int en)
 636 {
 637         unsigned int reg;
 638         int id = rdev_get_id(rdev);
 639         unsigned int id_slp, msk, val;
 640
 641         if (id >= RK817_ID_DCDC1 && id <= RK817_ID_DCDC4)
 642                 id_slp = id;
 643         else if (id >= RK817_ID_LDO1 && id <= RK817_ID_LDO8)
 644                 id_slp = 8 + (id - RK817_ID_LDO1);
 645         else if (id >= RK817_ID_LDO9 && id <= RK809_ID_SW2)
 646                 id_slp = 4 + (id - RK817_ID_LDO9);
 647         else
 648                 return -EINVAL;
 649
 650         reg = RK817_POWER_SLP_EN_REG(id_slp / 8);
 651
 652         msk = BIT(id_slp % 8);
 653         if (en)
 654                 val = msk;
 655         else
 656                 val = 0;
 657
 658         return regmap_update_bits(rdev->regmap, reg, msk, val);
 659 }
 660
 661 static int rk817_set_suspend_enable(struct regulator_dev *rdev)
 662 {
 663         return rk817_set_suspend_enable_ctrl(rdev, 1);
 664 }
 665
 666 static int rk817_set_suspend_disable(struct regulator_dev *rdev)
 667 {
 668         return rk817_set_suspend_enable_ctrl(rdev, 0);
 669 }
 670
 671 static int rk8xx_set_suspend_mode(struct regulator_dev *rdev, unsigned int mode)
 672 {
 673         unsigned int reg;
 674
 675         reg = rdev->desc->vsel_reg + RK808_SLP_REG_OFFSET;
 676
 677         switch (mode) {
 678         case REGULATOR_MODE_FAST:
 679                 return regmap_update_bits(rdev->regmap, reg,
 680                                           PWM_MODE_MSK, FPWM_MODE);
 681         case REGULATOR_MODE_NORMAL:
 682                 return regmap_update_bits(rdev->regmap, reg,
 683                                           PWM_MODE_MSK, AUTO_PWM_MODE);
 684         default:
 685                 dev_err(&rdev->dev, "do not support this mode\n");
 686                 return -EINVAL;
 687         }
 688
 689         return 0;
 690 }
 691
 692 static int rk8xx_set_mode(struct regulator_dev *rdev, unsigned int mode)
 693 {
 694         switch (mode) {
 695         case REGULATOR_MODE_FAST:
 696                 return regmap_update_bits(rdev->regmap, rdev->desc->vsel_reg,
 697                                           PWM_MODE_MSK, FPWM_MODE);
 698         case REGULATOR_MODE_NORMAL:
 699                 return regmap_update_bits(rdev->regmap, rdev->desc->vsel_reg,
 700                                           PWM_MODE_MSK, AUTO_PWM_MODE);
 701         default:
 702                 dev_err(&rdev->dev, "do not support this mode\n");
 703                 return -EINVAL;
 704         }
 705
 706         return 0;
 707 }
 708
 709 static unsigned int rk8xx_get_mode(struct regulator_dev *rdev)
 710 {
 711         unsigned int val;
 712         int err;
 713
 714         err = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &val);
 715         if (err)
 716                 return err;
 717
 718         if (val & FPWM_MODE)
 719                 return REGULATOR_MODE_FAST;
 720         else
 721                 return REGULATOR_MODE_NORMAL;
 722 }
 723
 724 static int rk8xx_is_enabled_wmsk_regmap(struct regulator_dev *rdev)
 725 {
 726         unsigned int val;
 727         int ret;
 728
 729         ret = regmap_read(rdev->regmap, rdev->desc->enable_reg, &val);
 730         if (ret != 0)
 731                 return ret;
 732
 733         /* add write mask bit */
 734         val |= (rdev->desc->enable_mask & 0xf0);
 735         val &= rdev->desc->enable_mask;
 736
 737         if (rdev->desc->enable_is_inverted) {
 738                 if (rdev->desc->enable_val)
 739                         return val != rdev->desc->enable_val;
 740                 return (val == 0);
 741         }
 742         if (rdev->desc->enable_val)
 743                 return val == rdev->desc->enable_val;
 744         return val != 0;
 745 }
 746
 747 static unsigned int rk8xx_regulator_of_map_mode(unsigned int mode)
 748 {
 749         switch (mode) {
 750         case 1:
 751                 return REGULATOR_MODE_FAST;
 752         case 2:
 753                 return REGULATOR_MODE_NORMAL;
 754         default:
 755                 return REGULATOR_MODE_INVALID;
 756         }
 757 }
 758
 759 static const struct regulator_ops rk805_reg_ops = {
 760         .list_voltage           = regulator_list_voltage_linear,
 761         .map_voltage            = regulator_map_voltage_linear,
 762         .get_voltage_sel        = regulator_get_voltage_sel_regmap,
 763         .set_voltage_sel        = regulator_set_voltage_sel_regmap,
 764         .enable                 = regulator_enable_regmap,
 765         .disable                = regulator_disable_regmap,
 766         .is_enabled             = regulator_is_enabled_regmap,
 767         .set_suspend_voltage    = rk808_set_suspend_voltage,
 768         .set_suspend_enable     = rk805_set_suspend_enable,
 769         .set_suspend_disable    = rk805_set_suspend_disable,
 770 };
 771
 772 static const struct regulator_ops rk805_switch_ops = {
 773         .enable                 = regulator_enable_regmap,
 774         .disable                = regulator_disable_regmap,
 775         .is_enabled             = regulator_is_enabled_regmap,
 776         .set_suspend_enable     = rk805_set_suspend_enable,
 777         .set_suspend_disable    = rk805_set_suspend_disable,
 778 };
 779
 780 static const struct regulator_ops rk806_ops_dcdc = {
 781         .list_voltage           = regulator_list_voltage_linear_range,
 782         .map_voltage            = regulator_map_voltage_linear_range,
 783         .get_voltage_sel        = regulator_get_voltage_sel_regmap,
 784         .set_voltage_sel        = regulator_set_voltage_sel_regmap,
 785         .set_voltage_time_sel   = regulator_set_voltage_time_sel,
 786         .set_mode               = rk806_set_mode_dcdc,
 787         .get_mode               = rk806_get_mode_dcdc,
 788
 789         .enable                 = regulator_enable_regmap,
 790         .disable                = regulator_disable_regmap,
 791         .is_enabled             = rk8xx_is_enabled_wmsk_regmap,
 792
 793         .set_suspend_mode       = rk806_set_mode_dcdc,
 794         .set_ramp_delay         = rk806_set_ramp_delay_dcdc,
 795
 796         .set_suspend_voltage    = rk806_set_suspend_voltage_range_dcdc,
 797         .set_suspend_enable     = rk806_set_suspend_enable,
 798         .set_suspend_disable    = rk806_set_suspend_disable,
 799 };
 800
 801 static const struct regulator_ops rk806_ops_nldo = {
 802         .list_voltage           = regulator_list_voltage_linear_range,
 803         .map_voltage            = regulator_map_voltage_linear_range,
 804         .get_voltage_sel        = regulator_get_voltage_sel_regmap,
 805         .set_voltage_sel        = regulator_set_voltage_sel_regmap,
 806         .set_voltage_time_sel   = regulator_set_voltage_time_sel,
 807
 808         .enable                 = regulator_enable_regmap,
 809         .disable                = regulator_disable_regmap,
 810         .is_enabled             = regulator_is_enabled_regmap,
 811
 812         .set_ramp_delay         = regulator_set_ramp_delay_regmap,
 813
 814         .set_suspend_voltage    = rk806_set_suspend_voltage_range_nldo,
 815         .set_suspend_enable     = rk806_set_suspend_enable,
 816         .set_suspend_disable    = rk806_set_suspend_disable,
 817 };
 818
 819 static const struct regulator_ops rk806_ops_pldo = {
 820         .list_voltage           = regulator_list_voltage_linear_range,
 821         .map_voltage            = regulator_map_voltage_linear_range,
 822
 823         .get_voltage_sel        = regulator_get_voltage_sel_regmap,
 824         .set_voltage_sel        = regulator_set_voltage_sel_regmap,
 825         .set_voltage_time_sel   = regulator_set_voltage_time_sel,
 826
 827         .enable                 = regulator_enable_regmap,
 828         .disable                = regulator_disable_regmap,
 829         .is_enabled             = regulator_is_enabled_regmap,
 830
 831         .set_ramp_delay         = regulator_set_ramp_delay_regmap,
 832
 833         .set_suspend_voltage    = rk806_set_suspend_voltage_range_pldo,
 834         .set_suspend_enable     = rk806_set_suspend_enable,
 835         .set_suspend_disable    = rk806_set_suspend_disable,
 836 };
 837
 838 static const struct regulator_ops rk808_buck1_2_ops = {
 839         .list_voltage           = regulator_list_voltage_linear,
 840         .map_voltage            = regulator_map_voltage_linear,
 841         .get_voltage_sel        = rk808_buck1_2_get_voltage_sel_regmap,
 842         .set_voltage_sel        = rk808_buck1_2_set_voltage_sel,
 843         .set_voltage_time_sel   = rk808_buck1_2_set_voltage_time_sel,
 844         .enable                 = regulator_enable_regmap,
 845         .disable                = regulator_disable_regmap,
 846         .is_enabled             = regulator_is_enabled_regmap,
 847         .set_ramp_delay         = regulator_set_ramp_delay_regmap,
 848         .set_suspend_voltage    = rk808_set_suspend_voltage,
 849         .set_suspend_enable     = rk808_set_suspend_enable,
 850         .set_suspend_disable    = rk808_set_suspend_disable,
 851 };
 852
 853 static const struct regulator_ops rk808_reg_ops = {
 854         .list_voltage           = regulator_list_voltage_linear,
 855         .map_voltage            = regulator_map_voltage_linear,
 856         .get_voltage_sel        = regulator_get_voltage_sel_regmap,
 857         .set_voltage_sel        = regulator_set_voltage_sel_regmap,
 858         .enable                 = regulator_enable_regmap,
 859         .disable                = regulator_disable_regmap,
 860         .is_enabled             = regulator_is_enabled_regmap,
 861         .set_suspend_voltage    = rk808_set_suspend_voltage,
 862         .set_suspend_enable     = rk808_set_suspend_enable,
 863         .set_suspend_disable    = rk808_set_suspend_disable,
 864 };
 865
 866 static const struct regulator_ops rk808_reg_ops_ranges = {
 867         .list_voltage           = regulator_list_voltage_linear_range,
 868         .map_voltage            = regulator_map_voltage_linear_range,
 869         .get_voltage_sel        = regulator_get_voltage_sel_regmap,
 870         .set_voltage_sel        = regulator_set_voltage_sel_regmap,
 871         .enable                 = regulator_enable_regmap,
 872         .disable                = regulator_disable_regmap,
 873         .is_enabled             = regulator_is_enabled_regmap,
 874         .set_suspend_voltage    = rk808_set_suspend_voltage_range,
 875         .set_suspend_enable     = rk808_set_suspend_enable,
 876         .set_suspend_disable    = rk808_set_suspend_disable,
 877 };
 878
 879 static const struct regulator_ops rk808_switch_ops = {
 880         .enable                 = regulator_enable_regmap,
 881         .disable                = regulator_disable_regmap,
 882         .is_enabled             = regulator_is_enabled_regmap,
 883         .set_suspend_enable     = rk808_set_suspend_enable,
 884         .set_suspend_disable    = rk808_set_suspend_disable,
 885 };
 886
 887 static const struct linear_range rk805_buck_1_2_voltage_ranges[] = {
 888         REGULATOR_LINEAR_RANGE(712500, 0, 59, 12500),
 889         REGULATOR_LINEAR_RANGE(1800000, 60, 62, 200000),
 890         REGULATOR_LINEAR_RANGE(2300000, 63, 63, 0),
 891 };
 892
 893 static const struct regulator_ops rk809_buck5_ops_range = {
 894         .list_voltage           = regulator_list_voltage_linear_range,
 895         .map_voltage            = regulator_map_voltage_linear_range,
 896         .get_voltage_sel        = regulator_get_voltage_sel_regmap,
 897         .set_voltage_sel        = regulator_set_voltage_sel_regmap,
 898         .set_voltage_time_sel   = regulator_set_voltage_time_sel,
 899         .enable                 = regulator_enable_regmap,
 900         .disable                = regulator_disable_regmap,
 901         .is_enabled             = rk8xx_is_enabled_wmsk_regmap,
 902         .set_suspend_voltage    = rk808_set_suspend_voltage_range,
 903         .set_suspend_enable     = rk817_set_suspend_enable,
 904         .set_suspend_disable    = rk817_set_suspend_disable,
 905 };
 906
 907 static const struct regulator_ops rk817_reg_ops = {
 908         .list_voltage           = regulator_list_voltage_linear,
 909         .map_voltage            = regulator_map_voltage_linear,
 910         .get_voltage_sel        = regulator_get_voltage_sel_regmap,
 911         .set_voltage_sel        = regulator_set_voltage_sel_regmap,
 912         .enable                 = regulator_enable_regmap,
 913         .disable                = regulator_disable_regmap,
 914         .is_enabled             = rk8xx_is_enabled_wmsk_regmap,
 915         .set_suspend_voltage    = rk808_set_suspend_voltage,
 916         .set_suspend_enable     = rk817_set_suspend_enable,
 917         .set_suspend_disable    = rk817_set_suspend_disable,
 918 };
 919
 920 static const struct regulator_ops rk817_boost_ops = {
 921         .list_voltage           = regulator_list_voltage_linear,
 922         .map_voltage            = regulator_map_voltage_linear,
 923         .get_voltage_sel        = regulator_get_voltage_sel_regmap,
 924         .set_voltage_sel        = regulator_set_voltage_sel_regmap,
 925         .enable                 = regulator_enable_regmap,
 926         .disable                = regulator_disable_regmap,
 927         .is_enabled             = rk8xx_is_enabled_wmsk_regmap,
 928         .set_suspend_enable     = rk817_set_suspend_enable,
 929         .set_suspend_disable    = rk817_set_suspend_disable,
 930 };
 931
 932 static const struct regulator_ops rk817_buck_ops_range = {
 933         .list_voltage           = regulator_list_voltage_linear_range,
 934         .map_voltage            = regulator_map_voltage_linear_range,
 935         .get_voltage_sel        = regulator_get_voltage_sel_regmap,
 936         .set_voltage_sel        = regulator_set_voltage_sel_regmap,
 937         .set_voltage_time_sel   = regulator_set_voltage_time_sel,
 938         .enable                 = regulator_enable_regmap,
 939         .disable                = regulator_disable_regmap,
 940         .is_enabled             = rk8xx_is_enabled_wmsk_regmap,
 941         .set_mode               = rk8xx_set_mode,
 942         .get_mode               = rk8xx_get_mode,
 943         .set_suspend_mode       = rk8xx_set_suspend_mode,
 944         .set_ramp_delay         = regulator_set_ramp_delay_regmap,
 945         .set_suspend_voltage    = rk808_set_suspend_voltage_range,
 946         .set_suspend_enable     = rk817_set_suspend_enable,
 947         .set_suspend_disable    = rk817_set_suspend_disable,
 948 };
 949
 950 static const struct regulator_ops rk817_switch_ops = {
 951         .enable                 = regulator_enable_regmap,
 952         .disable                = regulator_disable_regmap,
 953         .is_enabled             = rk8xx_is_enabled_wmsk_regmap,
 954         .set_suspend_enable     = rk817_set_suspend_enable,
 955         .set_suspend_disable    = rk817_set_suspend_disable,
 956 };
 957
 958 static const struct regulator_desc rk805_reg[] = {
 959         {
 960                 .name = "DCDC_REG1",
 961                 .supply_name = "vcc1",
 962                 .of_match = of_match_ptr("DCDC_REG1"),
 963                 .regulators_node = of_match_ptr("regulators"),
 964                 .id = RK805_ID_DCDC1,
 965                 .ops = &rk808_reg_ops_ranges,
 966                 .type = REGULATOR_VOLTAGE,
 967                 .n_voltages = 64,
 968                 .linear_ranges = rk805_buck_1_2_voltage_ranges,
 969                 .n_linear_ranges = ARRAY_SIZE(rk805_buck_1_2_voltage_ranges),
 970                 .vsel_reg = RK805_BUCK1_ON_VSEL_REG,
 971                 .vsel_mask = RK818_BUCK_VSEL_MASK,
 972                 .enable_reg = RK805_DCDC_EN_REG,
 973                 .enable_mask = BIT(0),
 974                 .owner = THIS_MODULE,
 975         }, {
 976                 .name = "DCDC_REG2",
 977                 .supply_name = "vcc2",
 978                 .of_match = of_match_ptr("DCDC_REG2"),
 979                 .regulators_node = of_match_ptr("regulators"),
 980                 .id = RK805_ID_DCDC2,
 981                 .ops = &rk808_reg_ops_ranges,
 982                 .type = REGULATOR_VOLTAGE,
 983                 .n_voltages = 64,
 984                 .linear_ranges = rk805_buck_1_2_voltage_ranges,
 985                 .n_linear_ranges = ARRAY_SIZE(rk805_buck_1_2_voltage_ranges),
 986                 .vsel_reg = RK805_BUCK2_ON_VSEL_REG,
 987                 .vsel_mask = RK818_BUCK_VSEL_MASK,
 988                 .enable_reg = RK805_DCDC_EN_REG,
 989                 .enable_mask = BIT(1),
 990                 .owner = THIS_MODULE,
 991         }, {
 992                 .name = "DCDC_REG3",
 993                 .supply_name = "vcc3",
 994                 .of_match = of_match_ptr("DCDC_REG3"),
 995                 .regulators_node = of_match_ptr("regulators"),
 996                 .id = RK805_ID_DCDC3,
 997                 .ops = &rk805_switch_ops,
 998                 .type = REGULATOR_VOLTAGE,
 999                 .n_voltages = 1,
1000                 .enable_reg = RK805_DCDC_EN_REG,
1001                 .enable_mask = BIT(2),
1002                 .owner = THIS_MODULE,
1003         },
1004
1005         RK805_DESC(RK805_ID_DCDC4, "DCDC_REG4", "vcc4", 800, 3400, 100,
1006                 RK805_BUCK4_ON_VSEL_REG, RK818_BUCK4_VSEL_MASK,
1007                 RK805_DCDC_EN_REG, BIT(3), 0),
1008
1009         RK805_DESC(RK805_ID_LDO1, "LDO_REG1", "vcc5", 800, 3400, 100,
1010                 RK805_LDO1_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK805_LDO_EN_REG,
1011                 BIT(0), 400),
1012         RK805_DESC(RK805_ID_LDO2, "LDO_REG2", "vcc5", 800, 3400, 100,
1013                 RK805_LDO2_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK805_LDO_EN_REG,
1014                 BIT(1), 400),
1015         RK805_DESC(RK805_ID_LDO3, "LDO_REG3", "vcc6", 800, 3400, 100,
1016                 RK805_LDO3_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK805_LDO_EN_REG,
1017                 BIT(2), 400),
1018 };
1019
1020 static const struct linear_range rk806_buck_voltage_ranges[] = {
1021         REGULATOR_LINEAR_RANGE(500000, 0, 160, 6250), /* 500mV ~ 1500mV */
1022         REGULATOR_LINEAR_RANGE(1500000, 161, 237, 25000), /* 1500mV ~ 3400mV */
1023         REGULATOR_LINEAR_RANGE(3400000, 238, 255, 0),
1024 };
1025
1026 static const struct linear_range rk806_ldo_voltage_ranges[] = {
1027         REGULATOR_LINEAR_RANGE(500000, 0, 232, 12500), /* 500mV ~ 3400mV */
1028         REGULATOR_LINEAR_RANGE(3400000, 233, 255, 0), /* 500mV ~ 3400mV */
1029 };
1030
1031 static const struct regulator_desc rk806_reg[] = {
1032         RK806_REGULATOR("dcdc-reg1", "vcc1", RK806_ID_DCDC1, rk806_ops_dcdc,
1033                         RK806_BUCK_SEL_CNT, RK806_BUCK1_ON_VSEL,
1034                         RK806_POWER_EN0, rk806_buck_voltage_ranges, 0,
1035                         RK806_BUCK1_CONFIG, 0xc0, rk806_ramp_delay_table_dcdc),
1036         RK806_REGULATOR("dcdc-reg2", "vcc2", RK806_ID_DCDC2, rk806_ops_dcdc,
1037                         RK806_BUCK_SEL_CNT, RK806_BUCK2_ON_VSEL,
1038                         RK806_POWER_EN0, rk806_buck_voltage_ranges, 1,
1039                         RK806_BUCK2_CONFIG, 0xc0, rk806_ramp_delay_table_dcdc),
1040         RK806_REGULATOR("dcdc-reg3", "vcc3", RK806_ID_DCDC3, rk806_ops_dcdc,
1041                         RK806_BUCK_SEL_CNT, RK806_BUCK3_ON_VSEL,
1042                         RK806_POWER_EN0, rk806_buck_voltage_ranges, 2,
1043                         RK806_BUCK3_CONFIG, 0xc0, rk806_ramp_delay_table_dcdc),
1044         RK806_REGULATOR("dcdc-reg4", "vcc4", RK806_ID_DCDC4, rk806_ops_dcdc,
1045                         RK806_BUCK_SEL_CNT, RK806_BUCK4_ON_VSEL,
1046                         RK806_POWER_EN0, rk806_buck_voltage_ranges, 3,
1047                         RK806_BUCK4_CONFIG, 0xc0, rk806_ramp_delay_table_dcdc),
1048
1049         RK806_REGULATOR("dcdc-reg5", "vcc5", RK806_ID_DCDC5, rk806_ops_dcdc,
1050                         RK806_BUCK_SEL_CNT, RK806_BUCK5_ON_VSEL,
1051                         RK806_POWER_EN1, rk806_buck_voltage_ranges, 0,
1052                         RK806_BUCK5_CONFIG, 0xc0, rk806_ramp_delay_table_dcdc),
1053         RK806_REGULATOR("dcdc-reg6", "vcc6", RK806_ID_DCDC6, rk806_ops_dcdc,
1054                         RK806_BUCK_SEL_CNT, RK806_BUCK6_ON_VSEL,
1055                         RK806_POWER_EN1, rk806_buck_voltage_ranges, 1,
1056                         RK806_BUCK6_CONFIG, 0xc0, rk806_ramp_delay_table_dcdc),
1057         RK806_REGULATOR("dcdc-reg7", "vcc7", RK806_ID_DCDC7, rk806_ops_dcdc,
1058                         RK806_BUCK_SEL_CNT, RK806_BUCK7_ON_VSEL,
1059                         RK806_POWER_EN1, rk806_buck_voltage_ranges, 2,
1060                         RK806_BUCK7_CONFIG, 0xc0, rk806_ramp_delay_table_dcdc),
1061         RK806_REGULATOR("dcdc-reg8", "vcc8", RK806_ID_DCDC8, rk806_ops_dcdc,
1062                         RK806_BUCK_SEL_CNT, RK806_BUCK8_ON_VSEL,
1063                         RK806_POWER_EN1, rk806_buck_voltage_ranges, 3,
1064                         RK806_BUCK8_CONFIG, 0xc0, rk806_ramp_delay_table_dcdc),
1065
1066         RK806_REGULATOR("dcdc-reg9", "vcc9", RK806_ID_DCDC9, rk806_ops_dcdc,
1067                         RK806_BUCK_SEL_CNT, RK806_BUCK9_ON_VSEL,
1068                         RK806_POWER_EN2, rk806_buck_voltage_ranges, 0,
1069                         RK806_BUCK9_CONFIG, 0xc0, rk806_ramp_delay_table_dcdc),
1070         RK806_REGULATOR("dcdc-reg10", "vcc10", RK806_ID_DCDC10, rk806_ops_dcdc,
1071                         RK806_BUCK_SEL_CNT, RK806_BUCK10_ON_VSEL,
1072                         RK806_POWER_EN2, rk806_buck_voltage_ranges, 1,
1073                         RK806_BUCK10_CONFIG, 0xc0, rk806_ramp_delay_table_dcdc),
1074
1075         RK806_REGULATOR("nldo-reg1", "vcc13", RK806_ID_NLDO1, rk806_ops_nldo,
1076                         RK806_LDO_SEL_CNT, RK806_NLDO1_ON_VSEL,
1077                         RK806_POWER_EN3, rk806_ldo_voltage_ranges, 0,
1078                         0xEA, 0x38, rk806_ramp_delay_table_ldo),
1079         RK806_REGULATOR("nldo-reg2", "vcc13", RK806_ID_NLDO2, rk806_ops_nldo,
1080                         RK806_LDO_SEL_CNT, RK806_NLDO2_ON_VSEL,
1081                         RK806_POWER_EN3, rk806_ldo_voltage_ranges, 1,
1082                         0xEA, 0x38, rk806_ramp_delay_table_ldo),
1083         RK806_REGULATOR("nldo-reg3", "vcc13", RK806_ID_NLDO3, rk806_ops_nldo,
1084                         RK806_LDO_SEL_CNT, RK806_NLDO3_ON_VSEL,
1085                         RK806_POWER_EN3, rk806_ldo_voltage_ranges, 2,
1086                         0xEA, 0x38, rk806_ramp_delay_table_ldo),
1087         RK806_REGULATOR("nldo-reg4", "vcc14", RK806_ID_NLDO4, rk806_ops_nldo,
1088                         RK806_LDO_SEL_CNT, RK806_NLDO4_ON_VSEL,
1089                         RK806_POWER_EN3, rk806_ldo_voltage_ranges, 3,
1090                         0xEA, 0x38, rk806_ramp_delay_table_ldo),
1091
1092         RK806_REGULATOR("nldo-reg5", "vcc14", RK806_ID_NLDO5, rk806_ops_nldo,
1093                         RK806_LDO_SEL_CNT, RK806_NLDO5_ON_VSEL,
1094                         RK806_POWER_EN5, rk806_ldo_voltage_ranges, 2,
1095                         0xEA, 0x38, rk806_ramp_delay_table_ldo),
1096
1097         RK806_REGULATOR("pldo-reg1", "vcc11", RK806_ID_PLDO1, rk806_ops_pldo,
1098                         RK806_LDO_SEL_CNT, RK806_PLDO1_ON_VSEL,
1099                         RK806_POWER_EN4, rk806_ldo_voltage_ranges, 1,
1100                         0xEA, 0x38, rk806_ramp_delay_table_ldo),
1101         RK806_REGULATOR("pldo-reg2", "vcc11", RK806_ID_PLDO2, rk806_ops_pldo,
1102                         RK806_LDO_SEL_CNT, RK806_PLDO2_ON_VSEL,
1103                         RK806_POWER_EN4, rk806_ldo_voltage_ranges, 2,
1104                         0xEA, 0x38, rk806_ramp_delay_table_ldo),
1105         RK806_REGULATOR("pldo-reg3", "vcc11", RK806_ID_PLDO3, rk806_ops_pldo,
1106                         RK806_LDO_SEL_CNT, RK806_PLDO3_ON_VSEL,
1107                         RK806_POWER_EN4, rk806_ldo_voltage_ranges, 3,
1108                         0xEA, 0x38, rk806_ramp_delay_table_ldo),
1109
1110         RK806_REGULATOR("pldo-reg4", "vcc12", RK806_ID_PLDO4, rk806_ops_pldo,
1111                         RK806_LDO_SEL_CNT, RK806_PLDO4_ON_VSEL,
1112                         RK806_POWER_EN5, rk806_ldo_voltage_ranges, 0,
1113                         0xEA, 0x38, rk806_ramp_delay_table_ldo),
1114         RK806_REGULATOR("pldo-reg5", "vcc12", RK806_ID_PLDO5, rk806_ops_pldo,
1115                         RK806_LDO_SEL_CNT, RK806_PLDO5_ON_VSEL,
1116                         RK806_POWER_EN5, rk806_ldo_voltage_ranges, 1,
1117                         0xEA, 0x38, rk806_ramp_delay_table_ldo),
1118
1119         RK806_REGULATOR("pldo-reg6", "vcca", RK806_ID_PLDO6, rk806_ops_pldo,
1120                         RK806_LDO_SEL_CNT, RK806_PLDO6_ON_VSEL,
1121                         RK806_POWER_EN4, rk806_ldo_voltage_ranges, 0,
1122                         0xEA, 0x38, rk806_ramp_delay_table_ldo),
1123 };
1124
1125
1126 static const struct regulator_desc rk808_reg[] = {
1127         {
1128                 .name = "DCDC_REG1",
1129                 .supply_name = "vcc1",
1130                 .of_match = of_match_ptr("DCDC_REG1"),
1131                 .regulators_node = of_match_ptr("regulators"),
1132                 .id = RK808_ID_DCDC1,
1133                 .ops = &rk808_buck1_2_ops,
1134                 .type = REGULATOR_VOLTAGE,
1135                 .min_uV = 712500,
1136                 .uV_step = 12500,
1137                 .n_voltages = 64,
1138                 .vsel_reg = RK808_BUCK1_ON_VSEL_REG,
1139                 .vsel_mask = RK808_BUCK_VSEL_MASK,
1140                 .enable_reg = RK808_DCDC_EN_REG,
1141                 .enable_mask = BIT(0),
1142                 .ramp_reg = RK808_BUCK1_CONFIG_REG,
1143                 .ramp_mask = RK808_RAMP_RATE_MASK,
1144                 .ramp_delay_table = rk808_buck1_2_ramp_table,
1145                 .n_ramp_values = ARRAY_SIZE(rk808_buck1_2_ramp_table),
1146                 .owner = THIS_MODULE,
1147         }, {
1148                 .name = "DCDC_REG2",
1149                 .supply_name = "vcc2",
1150                 .of_match = of_match_ptr("DCDC_REG2"),
1151                 .regulators_node = of_match_ptr("regulators"),
1152                 .id = RK808_ID_DCDC2,
1153                 .ops = &rk808_buck1_2_ops,
1154                 .type = REGULATOR_VOLTAGE,
1155                 .min_uV = 712500,
1156                 .uV_step = 12500,
1157                 .n_voltages = 64,
1158                 .vsel_reg = RK808_BUCK2_ON_VSEL_REG,
1159                 .vsel_mask = RK808_BUCK_VSEL_MASK,
1160                 .enable_reg = RK808_DCDC_EN_REG,
1161                 .enable_mask = BIT(1),
1162                 .ramp_reg = RK808_BUCK2_CONFIG_REG,
1163                 .ramp_mask = RK808_RAMP_RATE_MASK,
1164                 .ramp_delay_table = rk808_buck1_2_ramp_table,
1165                 .n_ramp_values = ARRAY_SIZE(rk808_buck1_2_ramp_table),
1166                 .owner = THIS_MODULE,
1167         }, {
1168                 .name = "DCDC_REG3",
1169                 .supply_name = "vcc3",
1170                 .of_match = of_match_ptr("DCDC_REG3"),
1171                 .regulators_node = of_match_ptr("regulators"),
1172                 .id = RK808_ID_DCDC3,
1173                 .ops = &rk808_switch_ops,
1174                 .type = REGULATOR_VOLTAGE,
1175                 .n_voltages = 1,
1176                 .enable_reg = RK808_DCDC_EN_REG,
1177                 .enable_mask = BIT(2),
1178                 .owner = THIS_MODULE,
1179         },
1180         RK8XX_DESC(RK808_ID_DCDC4, "DCDC_REG4", "vcc4", 1800, 3300, 100,
1181                 RK808_BUCK4_ON_VSEL_REG, RK808_BUCK4_VSEL_MASK,
1182                 RK808_DCDC_EN_REG, BIT(3), 0),
1183         RK8XX_DESC(RK808_ID_LDO1, "LDO_REG1", "vcc6", 1800, 3400, 100,
1184                 RK808_LDO1_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
1185                 BIT(0), 400),
1186         RK8XX_DESC(RK808_ID_LDO2, "LDO_REG2", "vcc6", 1800, 3400, 100,
1187                 RK808_LDO2_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
1188                 BIT(1), 400),
1189         {
1190                 .name = "LDO_REG3",
1191                 .supply_name = "vcc7",
1192                 .of_match = of_match_ptr("LDO_REG3"),
1193                 .regulators_node = of_match_ptr("regulators"),
1194                 .id = RK808_ID_LDO3,
1195                 .ops = &rk808_reg_ops_ranges,
1196                 .type = REGULATOR_VOLTAGE,
1197                 .n_voltages = 16,
1198                 .linear_ranges = rk808_ldo3_voltage_ranges,
1199                 .n_linear_ranges = ARRAY_SIZE(rk808_ldo3_voltage_ranges),
1200                 .vsel_reg = RK808_LDO3_ON_VSEL_REG,
1201                 .vsel_mask = RK808_BUCK4_VSEL_MASK,
1202                 .enable_reg = RK808_LDO_EN_REG,
1203                 .enable_mask = BIT(2),
1204                 .enable_time = 400,
1205                 .owner = THIS_MODULE,
1206         },
1207         RK8XX_DESC(RK808_ID_LDO4, "LDO_REG4", "vcc9", 1800, 3400, 100,
1208                 RK808_LDO4_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
1209                 BIT(3), 400),
1210         RK8XX_DESC(RK808_ID_LDO5, "LDO_REG5", "vcc9", 1800, 3400, 100,
1211                 RK808_LDO5_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
1212                 BIT(4), 400),
1213         RK8XX_DESC(RK808_ID_LDO6, "LDO_REG6", "vcc10", 800, 2500, 100,
1214                 RK808_LDO6_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
1215                 BIT(5), 400),
1216         RK8XX_DESC(RK808_ID_LDO7, "LDO_REG7", "vcc7", 800, 2500, 100,
1217                 RK808_LDO7_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
1218                 BIT(6), 400),
1219         RK8XX_DESC(RK808_ID_LDO8, "LDO_REG8", "vcc11", 1800, 3400, 100,
1220                 RK808_LDO8_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
1221                 BIT(7), 400),
1222         RK8XX_DESC_SWITCH(RK808_ID_SWITCH1, "SWITCH_REG1", "vcc8",
1223                 RK808_DCDC_EN_REG, BIT(5)),
1224         RK8XX_DESC_SWITCH(RK808_ID_SWITCH2, "SWITCH_REG2", "vcc12",
1225                 RK808_DCDC_EN_REG, BIT(6)),
1226 };
1227
1228 static const struct regulator_desc rk809_reg[] = {
1229         {
1230                 .name = "DCDC_REG1",
1231                 .supply_name = "vcc1",
1232                 .of_match = of_match_ptr("DCDC_REG1"),
1233                 .regulators_node = of_match_ptr("regulators"),
1234                 .id = RK817_ID_DCDC1,
1235                 .ops = &rk817_buck_ops_range,
1236                 .type = REGULATOR_VOLTAGE,
1237                 .n_voltages = RK817_BUCK1_SEL_CNT + 1,
1238                 .linear_ranges = rk817_buck1_voltage_ranges,
1239                 .n_linear_ranges = ARRAY_SIZE(rk817_buck1_voltage_ranges),
1240                 .vsel_reg = RK817_BUCK1_ON_VSEL_REG,
1241                 .vsel_mask = RK817_BUCK_VSEL_MASK,
1242                 .enable_reg = RK817_POWER_EN_REG(0),
1243                 .enable_mask = ENABLE_MASK(RK817_ID_DCDC1),
1244                 .enable_val = ENABLE_MASK(RK817_ID_DCDC1),
1245                 .disable_val = DISABLE_VAL(RK817_ID_DCDC1),
1246                 .ramp_reg = RK817_BUCK_CONFIG_REG(RK817_ID_DCDC1),
1247                 .ramp_mask = RK817_RAMP_RATE_MASK,
1248                 .ramp_delay_table = rk817_buck1_4_ramp_table,
1249                 .n_ramp_values = ARRAY_SIZE(rk817_buck1_4_ramp_table),
1250                 .of_map_mode = rk8xx_regulator_of_map_mode,
1251                 .owner = THIS_MODULE,
1252         }, {
1253                 .name = "DCDC_REG2",
1254                 .supply_name = "vcc2",
1255                 .of_match = of_match_ptr("DCDC_REG2"),
1256                 .regulators_node = of_match_ptr("regulators"),
1257                 .id = RK817_ID_DCDC2,
1258                 .ops = &rk817_buck_ops_range,
1259                 .type = REGULATOR_VOLTAGE,
1260                 .n_voltages = RK817_BUCK1_SEL_CNT + 1,
1261                 .linear_ranges = rk817_buck1_voltage_ranges,
1262                 .n_linear_ranges = ARRAY_SIZE(rk817_buck1_voltage_ranges),
1263                 .vsel_reg = RK817_BUCK2_ON_VSEL_REG,
1264                 .vsel_mask = RK817_BUCK_VSEL_MASK,
1265                 .enable_reg = RK817_POWER_EN_REG(0),
1266                 .enable_mask = ENABLE_MASK(RK817_ID_DCDC2),
1267                 .enable_val = ENABLE_MASK(RK817_ID_DCDC2),
1268                 .disable_val = DISABLE_VAL(RK817_ID_DCDC2),
1269                 .ramp_reg = RK817_BUCK_CONFIG_REG(RK817_ID_DCDC2),
1270                 .ramp_mask = RK817_RAMP_RATE_MASK,
1271                 .ramp_delay_table = rk817_buck1_4_ramp_table,
1272                 .n_ramp_values = ARRAY_SIZE(rk817_buck1_4_ramp_table),
1273                 .of_map_mode = rk8xx_regulator_of_map_mode,
1274                 .owner = THIS_MODULE,
1275         }, {
1276                 .name = "DCDC_REG3",
1277                 .supply_name = "vcc3",
1278                 .of_match = of_match_ptr("DCDC_REG3"),
1279                 .regulators_node = of_match_ptr("regulators"),
1280                 .id = RK817_ID_DCDC3,
1281                 .ops = &rk817_buck_ops_range,
1282                 .type = REGULATOR_VOLTAGE,
1283                 .n_voltages = RK817_BUCK1_SEL_CNT + 1,
1284                 .linear_ranges = rk817_buck1_voltage_ranges,
1285                 .n_linear_ranges = ARRAY_SIZE(rk817_buck1_voltage_ranges),
1286                 .vsel_reg = RK817_BUCK3_ON_VSEL_REG,
1287                 .vsel_mask = RK817_BUCK_VSEL_MASK,
1288                 .enable_reg = RK817_POWER_EN_REG(0),
1289                 .enable_mask = ENABLE_MASK(RK817_ID_DCDC3),
1290                 .enable_val = ENABLE_MASK(RK817_ID_DCDC3),
1291                 .disable_val = DISABLE_VAL(RK817_ID_DCDC3),
1292                 .ramp_reg = RK817_BUCK_CONFIG_REG(RK817_ID_DCDC3),
1293                 .ramp_mask = RK817_RAMP_RATE_MASK,
1294                 .ramp_delay_table = rk817_buck1_4_ramp_table,
1295                 .n_ramp_values = ARRAY_SIZE(rk817_buck1_4_ramp_table),
1296                 .of_map_mode = rk8xx_regulator_of_map_mode,
1297                 .owner = THIS_MODULE,
1298         }, {
1299                 .name = "DCDC_REG4",
1300                 .supply_name = "vcc4",
1301                 .of_match = of_match_ptr("DCDC_REG4"),
1302                 .regulators_node = of_match_ptr("regulators"),
1303                 .id = RK817_ID_DCDC4,
1304                 .ops = &rk817_buck_ops_range,
1305                 .type = REGULATOR_VOLTAGE,
1306                 .n_voltages = RK817_BUCK3_SEL_CNT + 1,
1307                 .linear_ranges = rk817_buck3_voltage_ranges,
1308                 .n_linear_ranges = ARRAY_SIZE(rk817_buck3_voltage_ranges),
1309                 .vsel_reg = RK817_BUCK4_ON_VSEL_REG,
1310                 .vsel_mask = RK817_BUCK_VSEL_MASK,
1311                 .enable_reg = RK817_POWER_EN_REG(0),
1312                 .enable_mask = ENABLE_MASK(RK817_ID_DCDC4),
1313                 .enable_val = ENABLE_MASK(RK817_ID_DCDC4),
1314                 .disable_val = DISABLE_VAL(RK817_ID_DCDC4),
1315                 .ramp_reg = RK817_BUCK_CONFIG_REG(RK817_ID_DCDC4),
1316                 .ramp_mask = RK817_RAMP_RATE_MASK,
1317                 .ramp_delay_table = rk817_buck1_4_ramp_table,
1318                 .n_ramp_values = ARRAY_SIZE(rk817_buck1_4_ramp_table),
1319                 .of_map_mode = rk8xx_regulator_of_map_mode,
1320                 .owner = THIS_MODULE,
1321         },
1322         {
1323                 .name = "DCDC_REG5",
1324                 .supply_name = "vcc9",
1325                 .of_match = of_match_ptr("DCDC_REG5"),
1326                 .regulators_node = of_match_ptr("regulators"),
1327                 .id = RK809_ID_DCDC5,
1328                 .ops = &rk809_buck5_ops_range,
1329                 .type = REGULATOR_VOLTAGE,
1330                 .n_voltages = RK809_BUCK5_SEL_CNT,
1331                 .linear_ranges = rk809_buck5_voltage_ranges,
1332                 .n_linear_ranges = ARRAY_SIZE(rk809_buck5_voltage_ranges),
1333                 .vsel_reg = RK809_BUCK5_CONFIG(0),
1334                 .vsel_mask = RK809_BUCK5_VSEL_MASK,
1335                 .enable_reg = RK817_POWER_EN_REG(3),
1336                 .enable_mask = ENABLE_MASK(1),
1337                 .enable_val = ENABLE_MASK(1),
1338                 .disable_val = DISABLE_VAL(1),
1339                 .of_map_mode = rk8xx_regulator_of_map_mode,
1340                 .owner = THIS_MODULE,
1341         },
1342         RK817_DESC(RK817_ID_LDO1, "LDO_REG1", "vcc5", 600, 3400, 25,
1343                    RK817_LDO_ON_VSEL_REG(0), RK817_LDO_VSEL_MASK,
1344                    RK817_POWER_EN_REG(1), ENABLE_MASK(0),
1345                    DISABLE_VAL(0), 400),
1346         RK817_DESC(RK817_ID_LDO2, "LDO_REG2", "vcc5", 600, 3400, 25,
1347                    RK817_LDO_ON_VSEL_REG(1), RK817_LDO_VSEL_MASK,
1348                    RK817_POWER_EN_REG(1), ENABLE_MASK(1),
1349                    DISABLE_VAL(1), 400),
1350         RK817_DESC(RK817_ID_LDO3, "LDO_REG3", "vcc5", 600, 3400, 25,
1351                    RK817_LDO_ON_VSEL_REG(2), RK817_LDO_VSEL_MASK,
1352                    RK817_POWER_EN_REG(1), ENABLE_MASK(2),
1353                    DISABLE_VAL(2), 400),
1354         RK817_DESC(RK817_ID_LDO4, "LDO_REG4", "vcc6", 600, 3400, 25,
1355                    RK817_LDO_ON_VSEL_REG(3), RK817_LDO_VSEL_MASK,
1356                    RK817_POWER_EN_REG(1), ENABLE_MASK(3),
1357                    DISABLE_VAL(3), 400),
1358         RK817_DESC(RK817_ID_LDO5, "LDO_REG5", "vcc6", 600, 3400, 25,
1359                    RK817_LDO_ON_VSEL_REG(4), RK817_LDO_VSEL_MASK,
1360                    RK817_POWER_EN_REG(2), ENABLE_MASK(0),
1361                    DISABLE_VAL(0), 400),
1362         RK817_DESC(RK817_ID_LDO6, "LDO_REG6", "vcc6", 600, 3400, 25,
1363                    RK817_LDO_ON_VSEL_REG(5), RK817_LDO_VSEL_MASK,
1364                    RK817_POWER_EN_REG(2), ENABLE_MASK(1),
1365                    DISABLE_VAL(1), 400),
1366         RK817_DESC(RK817_ID_LDO7, "LDO_REG7", "vcc7", 600, 3400, 25,
1367                    RK817_LDO_ON_VSEL_REG(6), RK817_LDO_VSEL_MASK,
1368                    RK817_POWER_EN_REG(2), ENABLE_MASK(2),
1369                    DISABLE_VAL(2), 400),
1370         RK817_DESC(RK817_ID_LDO8, "LDO_REG8", "vcc7", 600, 3400, 25,
1371                    RK817_LDO_ON_VSEL_REG(7), RK817_LDO_VSEL_MASK,
1372                    RK817_POWER_EN_REG(2), ENABLE_MASK(3),
1373                    DISABLE_VAL(3), 400),
1374         RK817_DESC(RK817_ID_LDO9, "LDO_REG9", "vcc7", 600, 3400, 25,
1375                    RK817_LDO_ON_VSEL_REG(8), RK817_LDO_VSEL_MASK,
1376                    RK817_POWER_EN_REG(3), ENABLE_MASK(0),
1377                    DISABLE_VAL(0), 400),
1378         RK817_DESC_SWITCH(RK809_ID_SW1, "SWITCH_REG1", "vcc9",
1379                           RK817_POWER_EN_REG(3), ENABLE_MASK(2),
1380                           DISABLE_VAL(2)),
1381         RK817_DESC_SWITCH(RK809_ID_SW2, "SWITCH_REG2", "vcc8",
1382                           RK817_POWER_EN_REG(3), ENABLE_MASK(3),
1383                           DISABLE_VAL(3)),
1384 };
1385
1386 static const struct regulator_desc rk817_reg[] = {
1387         {
1388                 .name = "DCDC_REG1",
1389                 .supply_name = "vcc1",
1390                 .of_match = of_match_ptr("DCDC_REG1"),
1391                 .regulators_node = of_match_ptr("regulators"),
1392                 .id = RK817_ID_DCDC1,
1393                 .ops = &rk817_buck_ops_range,
1394                 .type = REGULATOR_VOLTAGE,
1395                 .n_voltages = RK817_BUCK1_SEL_CNT + 1,
1396                 .linear_ranges = rk817_buck1_voltage_ranges,
1397                 .n_linear_ranges = ARRAY_SIZE(rk817_buck1_voltage_ranges),
1398                 .vsel_reg = RK817_BUCK1_ON_VSEL_REG,
1399                 .vsel_mask = RK817_BUCK_VSEL_MASK,
1400                 .enable_reg = RK817_POWER_EN_REG(0),
1401                 .enable_mask = ENABLE_MASK(RK817_ID_DCDC1),
1402                 .enable_val = ENABLE_MASK(RK817_ID_DCDC1),
1403                 .disable_val = DISABLE_VAL(RK817_ID_DCDC1),
1404                 .ramp_reg = RK817_BUCK_CONFIG_REG(RK817_ID_DCDC1),
1405                 .ramp_mask = RK817_RAMP_RATE_MASK,
1406                 .ramp_delay_table = rk817_buck1_4_ramp_table,
1407                 .n_ramp_values = ARRAY_SIZE(rk817_buck1_4_ramp_table),
1408                 .of_map_mode = rk8xx_regulator_of_map_mode,
1409                 .owner = THIS_MODULE,
1410         }, {
1411                 .name = "DCDC_REG2",
1412                 .supply_name = "vcc2",
1413                 .of_match = of_match_ptr("DCDC_REG2"),
1414                 .regulators_node = of_match_ptr("regulators"),
1415                 .id = RK817_ID_DCDC2,
1416                 .ops = &rk817_buck_ops_range,
1417                 .type = REGULATOR_VOLTAGE,
1418                 .n_voltages = RK817_BUCK1_SEL_CNT + 1,
1419                 .linear_ranges = rk817_buck1_voltage_ranges,
1420                 .n_linear_ranges = ARRAY_SIZE(rk817_buck1_voltage_ranges),
1421                 .vsel_reg = RK817_BUCK2_ON_VSEL_REG,
1422                 .vsel_mask = RK817_BUCK_VSEL_MASK,
1423                 .enable_reg = RK817_POWER_EN_REG(0),
1424                 .enable_mask = ENABLE_MASK(RK817_ID_DCDC2),
1425                 .enable_val = ENABLE_MASK(RK817_ID_DCDC2),
1426                 .disable_val = DISABLE_VAL(RK817_ID_DCDC2),
1427                 .ramp_reg = RK817_BUCK_CONFIG_REG(RK817_ID_DCDC2),
1428                 .ramp_mask = RK817_RAMP_RATE_MASK,
1429                 .ramp_delay_table = rk817_buck1_4_ramp_table,
1430                 .n_ramp_values = ARRAY_SIZE(rk817_buck1_4_ramp_table),
1431                 .of_map_mode = rk8xx_regulator_of_map_mode,
1432                 .owner = THIS_MODULE,
1433         }, {
1434                 .name = "DCDC_REG3",
1435                 .supply_name = "vcc3",
1436                 .of_match = of_match_ptr("DCDC_REG3"),
1437                 .regulators_node = of_match_ptr("regulators"),
1438                 .id = RK817_ID_DCDC3,
1439                 .ops = &rk817_buck_ops_range,
1440                 .type = REGULATOR_VOLTAGE,
1441                 .n_voltages = RK817_BUCK1_SEL_CNT + 1,
1442                 .linear_ranges = rk817_buck1_voltage_ranges,
1443                 .n_linear_ranges = ARRAY_SIZE(rk817_buck1_voltage_ranges),
1444                 .vsel_reg = RK817_BUCK3_ON_VSEL_REG,
1445                 .vsel_mask = RK817_BUCK_VSEL_MASK,
1446                 .enable_reg = RK817_POWER_EN_REG(0),
1447                 .enable_mask = ENABLE_MASK(RK817_ID_DCDC3),
1448                 .enable_val = ENABLE_MASK(RK817_ID_DCDC3),
1449                 .disable_val = DISABLE_VAL(RK817_ID_DCDC3),
1450                 .ramp_reg = RK817_BUCK_CONFIG_REG(RK817_ID_DCDC3),
1451                 .ramp_mask = RK817_RAMP_RATE_MASK,
1452                 .ramp_delay_table = rk817_buck1_4_ramp_table,
1453                 .n_ramp_values = ARRAY_SIZE(rk817_buck1_4_ramp_table),
1454                 .of_map_mode = rk8xx_regulator_of_map_mode,
1455                 .owner = THIS_MODULE,
1456         }, {
1457                 .name = "DCDC_REG4",
1458                 .supply_name = "vcc4",
1459                 .of_match = of_match_ptr("DCDC_REG4"),
1460                 .regulators_node = of_match_ptr("regulators"),
1461                 .id = RK817_ID_DCDC4,
1462                 .ops = &rk817_buck_ops_range,
1463                 .type = REGULATOR_VOLTAGE,
1464                 .n_voltages = RK817_BUCK3_SEL_CNT + 1,
1465                 .linear_ranges = rk817_buck3_voltage_ranges,
1466                 .n_linear_ranges = ARRAY_SIZE(rk817_buck3_voltage_ranges),
1467                 .vsel_reg = RK817_BUCK4_ON_VSEL_REG,
1468                 .vsel_mask = RK817_BUCK_VSEL_MASK,
1469                 .enable_reg = RK817_POWER_EN_REG(0),
1470                 .enable_mask = ENABLE_MASK(RK817_ID_DCDC4),
1471                 .enable_val = ENABLE_MASK(RK817_ID_DCDC4),
1472                 .disable_val = DISABLE_VAL(RK817_ID_DCDC4),
1473                 .ramp_reg = RK817_BUCK_CONFIG_REG(RK817_ID_DCDC4),
1474                 .ramp_mask = RK817_RAMP_RATE_MASK,
1475                 .ramp_delay_table = rk817_buck1_4_ramp_table,
1476                 .n_ramp_values = ARRAY_SIZE(rk817_buck1_4_ramp_table),
1477                 .of_map_mode = rk8xx_regulator_of_map_mode,
1478                 .owner = THIS_MODULE,
1479         },
1480         RK817_DESC(RK817_ID_LDO1, "LDO_REG1", "vcc5", 600, 3400, 25,
1481                    RK817_LDO_ON_VSEL_REG(0), RK817_LDO_VSEL_MASK,
1482                    RK817_POWER_EN_REG(1), ENABLE_MASK(0),
1483                    DISABLE_VAL(0), 400),
1484         RK817_DESC(RK817_ID_LDO2, "LDO_REG2", "vcc5", 600, 3400, 25,
1485                    RK817_LDO_ON_VSEL_REG(1), RK817_LDO_VSEL_MASK,
1486                    RK817_POWER_EN_REG(1), ENABLE_MASK(1),
1487                    DISABLE_VAL(1), 400),
1488         RK817_DESC(RK817_ID_LDO3, "LDO_REG3", "vcc5", 600, 3400, 25,
1489                    RK817_LDO_ON_VSEL_REG(2), RK817_LDO_VSEL_MASK,
1490                    RK817_POWER_EN_REG(1), ENABLE_MASK(2),
1491                    DISABLE_VAL(2), 400),
1492         RK817_DESC(RK817_ID_LDO4, "LDO_REG4", "vcc6", 600, 3400, 25,
1493                    RK817_LDO_ON_VSEL_REG(3), RK817_LDO_VSEL_MASK,
1494                    RK817_POWER_EN_REG(1), ENABLE_MASK(3),
1495                    DISABLE_VAL(3), 400),
1496         RK817_DESC(RK817_ID_LDO5, "LDO_REG5", "vcc6", 600, 3400, 25,
1497                    RK817_LDO_ON_VSEL_REG(4), RK817_LDO_VSEL_MASK,
1498                    RK817_POWER_EN_REG(2), ENABLE_MASK(0),
1499                    DISABLE_VAL(0), 400),
1500         RK817_DESC(RK817_ID_LDO6, "LDO_REG6", "vcc6", 600, 3400, 25,
1501                    RK817_LDO_ON_VSEL_REG(5), RK817_LDO_VSEL_MASK,
1502                    RK817_POWER_EN_REG(2), ENABLE_MASK(1),
1503                    DISABLE_VAL(1), 400),
1504         RK817_DESC(RK817_ID_LDO7, "LDO_REG7", "vcc7", 600, 3400, 25,
1505                    RK817_LDO_ON_VSEL_REG(6), RK817_LDO_VSEL_MASK,
1506                    RK817_POWER_EN_REG(2), ENABLE_MASK(2),
1507                    DISABLE_VAL(2), 400),
1508         RK817_DESC(RK817_ID_LDO8, "LDO_REG8", "vcc7", 600, 3400, 25,
1509                    RK817_LDO_ON_VSEL_REG(7), RK817_LDO_VSEL_MASK,
1510                    RK817_POWER_EN_REG(2), ENABLE_MASK(3),
1511                    DISABLE_VAL(3), 400),
1512         RK817_DESC(RK817_ID_LDO9, "LDO_REG9", "vcc7", 600, 3400, 25,
1513                    RK817_LDO_ON_VSEL_REG(8), RK817_LDO_VSEL_MASK,
1514                    RK817_POWER_EN_REG(3), ENABLE_MASK(0),
1515                    DISABLE_VAL(0), 400),
1516         RK817_BOOST_DESC(RK817_ID_BOOST, "BOOST", "vcc8", 4700, 5400, 100,
1517                          RK817_BOOST_OTG_CFG, RK817_BOOST_VSEL_MASK,
1518                          RK817_POWER_EN_REG(3), ENABLE_MASK(1), ENABLE_MASK(1),
1519                    DISABLE_VAL(1), 400, 3500 - 5400),
1520         RK817_DESC_SWITCH(RK817_ID_BOOST_OTG_SW, "OTG_SWITCH", "vcc9",
1521                           RK817_POWER_EN_REG(3), ENABLE_MASK(2),
1522                           DISABLE_VAL(2)),
1523 };
1524
1525 static const struct regulator_desc rk818_reg[] = {
1526         {
1527                 .name = "DCDC_REG1",
1528                 .supply_name = "vcc1",
1529                 .of_match = of_match_ptr("DCDC_REG1"),
1530                 .regulators_node = of_match_ptr("regulators"),
1531                 .id = RK818_ID_DCDC1,
1532                 .ops = &rk808_reg_ops,
1533                 .type = REGULATOR_VOLTAGE,
1534                 .min_uV = 712500,
1535                 .uV_step = 12500,
1536                 .n_voltages = 64,
1537                 .vsel_reg = RK818_BUCK1_ON_VSEL_REG,
1538                 .vsel_mask = RK818_BUCK_VSEL_MASK,
1539                 .enable_reg = RK818_DCDC_EN_REG,
1540                 .enable_mask = BIT(0),
1541                 .owner = THIS_MODULE,
1542         }, {
1543                 .name = "DCDC_REG2",
1544                 .supply_name = "vcc2",
1545                 .of_match = of_match_ptr("DCDC_REG2"),
1546                 .regulators_node = of_match_ptr("regulators"),
1547                 .id = RK818_ID_DCDC2,
1548                 .ops = &rk808_reg_ops,
1549                 .type = REGULATOR_VOLTAGE,
1550                 .min_uV = 712500,
1551                 .uV_step = 12500,
1552                 .n_voltages = 64,
1553                 .vsel_reg = RK818_BUCK2_ON_VSEL_REG,
1554                 .vsel_mask = RK818_BUCK_VSEL_MASK,
1555                 .enable_reg = RK818_DCDC_EN_REG,
1556                 .enable_mask = BIT(1),
1557                 .owner = THIS_MODULE,
1558         }, {
1559                 .name = "DCDC_REG3",
1560                 .supply_name = "vcc3",
1561                 .of_match = of_match_ptr("DCDC_REG3"),
1562                 .regulators_node = of_match_ptr("regulators"),
1563                 .id = RK818_ID_DCDC3,
1564                 .ops = &rk808_switch_ops,
1565                 .type = REGULATOR_VOLTAGE,
1566                 .n_voltages = 1,
1567                 .enable_reg = RK818_DCDC_EN_REG,
1568                 .enable_mask = BIT(2),
1569                 .owner = THIS_MODULE,
1570         },
1571         RK8XX_DESC(RK818_ID_DCDC4, "DCDC_REG4", "vcc4", 1800, 3600, 100,
1572                 RK818_BUCK4_ON_VSEL_REG, RK818_BUCK4_VSEL_MASK,
1573                 RK818_DCDC_EN_REG, BIT(3), 0),
1574         RK8XX_DESC(RK818_ID_BOOST, "DCDC_BOOST", "boost", 4700, 5400, 100,
1575                 RK818_BOOST_LDO9_ON_VSEL_REG, RK818_BOOST_ON_VSEL_MASK,
1576                 RK818_DCDC_EN_REG, BIT(4), 0),
1577         RK8XX_DESC(RK818_ID_LDO1, "LDO_REG1", "vcc6", 1800, 3400, 100,
1578                 RK818_LDO1_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
1579                 BIT(0), 400),
1580         RK8XX_DESC(RK818_ID_LDO2, "LDO_REG2", "vcc6", 1800, 3400, 100,
1581                 RK818_LDO2_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
1582                 BIT(1), 400),
1583         {
1584                 .name = "LDO_REG3",
1585                 .supply_name = "vcc7",
1586                 .of_match = of_match_ptr("LDO_REG3"),
1587                 .regulators_node = of_match_ptr("regulators"),
1588                 .id = RK818_ID_LDO3,
1589                 .ops = &rk808_reg_ops_ranges,
1590                 .type = REGULATOR_VOLTAGE,
1591                 .n_voltages = 16,
1592                 .linear_ranges = rk808_ldo3_voltage_ranges,
1593                 .n_linear_ranges = ARRAY_SIZE(rk808_ldo3_voltage_ranges),
1594                 .vsel_reg = RK818_LDO3_ON_VSEL_REG,
1595                 .vsel_mask = RK818_LDO3_ON_VSEL_MASK,
1596                 .enable_reg = RK818_LDO_EN_REG,
1597                 .enable_mask = BIT(2),
1598                 .enable_time = 400,
1599                 .owner = THIS_MODULE,
1600         },
1601         RK8XX_DESC(RK818_ID_LDO4, "LDO_REG4", "vcc8", 1800, 3400, 100,
1602                 RK818_LDO4_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
1603                 BIT(3), 400),
1604         RK8XX_DESC(RK818_ID_LDO5, "LDO_REG5", "vcc7", 1800, 3400, 100,
1605                 RK818_LDO5_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
1606                 BIT(4), 400),
1607         RK8XX_DESC(RK818_ID_LDO6, "LDO_REG6", "vcc8", 800, 2500, 100,
1608                 RK818_LDO6_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
1609                 BIT(5), 400),
1610         RK8XX_DESC(RK818_ID_LDO7, "LDO_REG7", "vcc7", 800, 2500, 100,
1611                 RK818_LDO7_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
1612                 BIT(6), 400),
1613         RK8XX_DESC(RK818_ID_LDO8, "LDO_REG8", "vcc8", 1800, 3400, 100,
1614                 RK818_LDO8_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
1615                 BIT(7), 400),
1616         RK8XX_DESC(RK818_ID_LDO9, "LDO_REG9", "vcc9", 1800, 3400, 100,
1617                 RK818_BOOST_LDO9_ON_VSEL_REG, RK818_LDO_VSEL_MASK,
1618                 RK818_DCDC_EN_REG, BIT(5), 400),
1619         RK8XX_DESC_SWITCH(RK818_ID_SWITCH, "SWITCH_REG", "vcc9",
1620                 RK818_DCDC_EN_REG, BIT(6)),
1621         RK8XX_DESC_SWITCH(RK818_ID_HDMI_SWITCH, "HDMI_SWITCH", "h_5v",
1622                 RK818_H5V_EN_REG, BIT(0)),
1623         RK8XX_DESC_SWITCH(RK818_ID_OTG_SWITCH, "OTG_SWITCH", "usb",
1624                 RK818_DCDC_EN_REG, BIT(7)),
1625 };
1626
1627 static int rk808_regulator_dt_parse_pdata(struct device *dev,
1628                                    struct regmap *map,
1629                                    struct rk808_regulator_data *pdata)
1630 {
1631         struct device_node *np;
1632         int tmp, ret = 0, i;
1633
1634         np = of_get_child_by_name(dev->of_node, "regulators");
1635         if (!np)
1636                 return -ENXIO;
1637
1638         for (i = 0; i < ARRAY_SIZE(pdata->dvs_gpio); i++) {
1639                 pdata->dvs_gpio[i] =
1640                         devm_gpiod_get_index_optional(dev, "dvs", i,
1641                                                       GPIOD_OUT_LOW);
1642                 if (IS_ERR(pdata->dvs_gpio[i])) {
1643                         ret = PTR_ERR(pdata->dvs_gpio[i]);
1644                         dev_err(dev, "failed to get dvs%d gpio (%d)\n", i, ret);
1645                         goto dt_parse_end;
1646                 }
1647
1648                 if (!pdata->dvs_gpio[i]) {
1649                         dev_info(dev, "there is no dvs%d gpio\n", i);
1650                         continue;
1651                 }
1652
1653                 tmp = i ? RK808_DVS2_POL : RK808_DVS1_POL;
1654                 ret = regmap_update_bits(map, RK808_IO_POL_REG, tmp,
1655                                 gpiod_is_active_low(pdata->dvs_gpio[i]) ?
1656                                 0 : tmp);
1657         }
1658
1659 dt_parse_end:
1660         of_node_put(np);
1661         return ret;
1662 }
1663
1664 static int rk808_regulator_probe(struct platform_device *pdev)
1665 {
1666         struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent);
1667         struct regulator_config config = {};
1668         struct regulator_dev *rk808_rdev;
1669         struct rk808_regulator_data *pdata;
1670         const struct regulator_desc *regulators;
1671         struct regmap *regmap;
1672         int ret, i, nregulators;
1673
1674         pdev->dev.of_node = pdev->dev.parent->of_node;
1675         pdev->dev.of_node_reused = true;
1676
1677         regmap = dev_get_regmap(pdev->dev.parent, NULL);
1678         if (!regmap)
1679                 return -ENODEV;
1680
1681         pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
1682         if (!pdata)
1683                 return -ENOMEM;
1684
1685         ret = rk808_regulator_dt_parse_pdata(&pdev->dev, regmap, pdata);
1686         if (ret < 0)
1687                 return ret;
1688
1689         platform_set_drvdata(pdev, pdata);
1690
1691         switch (rk808->variant) {
1692         case RK805_ID:
1693                 regulators = rk805_reg;
1694                 nregulators = RK805_NUM_REGULATORS;
1695                 break;
1696         case RK806_ID:
1697                 regulators = rk806_reg;
1698                 nregulators = ARRAY_SIZE(rk806_reg);
1699                 break;
1700         case RK808_ID:
1701                 regulators = rk808_reg;
1702                 nregulators = RK808_NUM_REGULATORS;
1703                 break;
1704         case RK809_ID:
1705                 regulators = rk809_reg;
1706                 nregulators = RK809_NUM_REGULATORS;
1707                 break;
1708         case RK817_ID:
1709                 regulators = rk817_reg;
1710                 nregulators = RK817_NUM_REGULATORS;
1711                 break;
1712         case RK818_ID:
1713                 regulators = rk818_reg;
1714                 nregulators = RK818_NUM_REGULATORS;
1715                 break;
1716         default:
1717                 dev_err(&pdev->dev, "unsupported RK8XX ID %lu\n",
1718                         rk808->variant);
1719                 return -EINVAL;
1720         }
1721
1722         config.dev = &pdev->dev;
1723         config.driver_data = pdata;
1724         config.regmap = regmap;
1725
1726         /* Instantiate the regulators */
1727         for (i = 0; i < nregulators; i++) {
1728                 rk808_rdev = devm_regulator_register(&pdev->dev,
1729                                                      &regulators[i], &config);
1730                 if (IS_ERR(rk808_rdev))
1731                         return dev_err_probe(&pdev->dev, PTR_ERR(rk808_rdev),
1732                                              "failed to register %d regulator\n", i);
1733         }
1734
1735         return 0;
1736 }
1737
1738 static struct platform_driver rk808_regulator_driver = {
1739         .probe = rk808_regulator_probe,
1740         .driver = {
1741                 .name = "rk808-regulator",
1742                 .probe_type = PROBE_FORCE_SYNCHRONOUS,
1743         },
1744 };
1745
1746 module_platform_driver(rk808_regulator_driver);
1747
1748 MODULE_DESCRIPTION("regulator driver for the RK805/RK808/RK818 series PMICs");
1749 MODULE_AUTHOR("Tony xie <[email protected]>");
1750 MODULE_AUTHOR("Chris Zhong <[email protected]>");
1751 MODULE_AUTHOR("Zhang Qing <[email protected]>");
1752 MODULE_AUTHOR("Wadim Egorov <[email protected]>");
1753 MODULE_AUTHOR("Xu Shengfei <[email protected]>");
1754 MODULE_LICENSE("GPL");
1755 MODULE_ALIAS("platform:rk808-regulator");