drivers/input/touchscreen/ili210x.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 #include <linux/crc-ccitt.h>
   3 #include <linux/delay.h>
   4 #include <linux/gpio/consumer.h>
   5 #include <linux/i2c.h>
   6 #include <linux/ihex.h>
   7 #include <linux/input.h>
   8 #include <linux/input/mt.h>
   9 #include <linux/input/touchscreen.h>
  10 #include <linux/interrupt.h>
  11 #include <linux/module.h>
  12 #include <linux/of_device.h>
  13 #include <linux/sizes.h>
  14 #include <linux/slab.h>
  15 #include <asm/unaligned.h>
  16
  17 #define ILI2XXX_POLL_PERIOD     15
  18
  19 #define ILI210X_DATA_SIZE       64
  20 #define ILI211X_DATA_SIZE       43
  21 #define ILI251X_DATA_SIZE1      31
  22 #define ILI251X_DATA_SIZE2      20
  23
  24 /* Touchscreen commands */
  25 #define REG_TOUCHDATA           0x10
  26 #define REG_PANEL_INFO          0x20
  27 #define REG_FIRMWARE_VERSION    0x40
  28 #define REG_PROTOCOL_VERSION    0x42
  29 #define REG_KERNEL_VERSION      0x61
  30 #define REG_IC_BUSY             0x80
  31 #define REG_IC_BUSY_NOT_BUSY    0x50
  32 #define REG_GET_MODE            0xc0
  33 #define REG_GET_MODE_AP         0x5a
  34 #define REG_GET_MODE_BL         0x55
  35 #define REG_SET_MODE_AP         0xc1
  36 #define REG_SET_MODE_BL         0xc2
  37 #define REG_WRITE_DATA          0xc3
  38 #define REG_WRITE_ENABLE        0xc4
  39 #define REG_READ_DATA_CRC       0xc7
  40 #define REG_CALIBRATE           0xcc
  41
  42 #define ILI251X_FW_FILENAME     "ilitek/ili251x.bin"
  43
  44 struct ili2xxx_chip {
  45         int (*read_reg)(struct i2c_client *client, u8 reg,
  46                         void *buf, size_t len);
  47         int (*get_touch_data)(struct i2c_client *client, u8 *data);
  48         bool (*parse_touch_data)(const u8 *data, unsigned int finger,
  49                                  unsigned int *x, unsigned int *y,
  50                                  unsigned int *z);
  51         bool (*continue_polling)(const u8 *data, bool touch);
  52         unsigned int max_touches;
  53         unsigned int resolution;
  54         bool has_calibrate_reg;
  55         bool has_firmware_proto;
  56         bool has_pressure_reg;
  57 };
  58
  59 struct ili210x {
  60         struct i2c_client *client;
  61         struct input_dev *input;
  62         struct gpio_desc *reset_gpio;
  63         struct touchscreen_properties prop;
  64         const struct ili2xxx_chip *chip;
  65         u8 version_firmware[8];
  66         u8 version_kernel[5];
  67         u8 version_proto[2];
  68         u8 ic_mode[2];
  69         bool stop;
  70 };
  71
  72 static int ili210x_read_reg(struct i2c_client *client,
  73                             u8 reg, void *buf, size_t len)
  74 {
  75         struct i2c_msg msg[] = {
  76                 {
  77                         .addr   = client->addr,
  78                         .flags  = 0,
  79                         .len    = 1,
  80                         .buf    = &reg,
  81                 },
  82                 {
  83                         .addr   = client->addr,
  84                         .flags  = I2C_M_RD,
  85                         .len    = len,
  86                         .buf    = buf,
  87                 }
  88         };
  89         int error, ret;
  90
  91         ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg));
  92         if (ret != ARRAY_SIZE(msg)) {
  93                 error = ret < 0 ? ret : -EIO;
  94                 dev_err(&client->dev, "%s failed: %d\n", __func__, error);
  95                 return error;
  96         }
  97
  98         return 0;
  99 }
 100
 101 static int ili210x_read_touch_data(struct i2c_client *client, u8 *data)
 102 {
 103         return ili210x_read_reg(client, REG_TOUCHDATA,
 104                                 data, ILI210X_DATA_SIZE);
 105 }
 106
 107 static bool ili210x_touchdata_to_coords(const u8 *touchdata,
 108                                         unsigned int finger,
 109                                         unsigned int *x, unsigned int *y,
 110                                         unsigned int *z)
 111 {
 112         if (!(touchdata[0] & BIT(finger)))
 113                 return false;
 114
 115         *x = get_unaligned_be16(touchdata + 1 + (finger * 4) + 0);
 116         *y = get_unaligned_be16(touchdata + 1 + (finger * 4) + 2);
 117
 118         return true;
 119 }
 120
 121 static bool ili210x_check_continue_polling(const u8 *data, bool touch)
 122 {
 123         return data[0] & 0xf3;
 124 }
 125
 126 static const struct ili2xxx_chip ili210x_chip = {
 127         .read_reg               = ili210x_read_reg,
 128         .get_touch_data         = ili210x_read_touch_data,
 129         .parse_touch_data       = ili210x_touchdata_to_coords,
 130         .continue_polling       = ili210x_check_continue_polling,
 131         .max_touches            = 2,
 132         .has_calibrate_reg      = true,
 133 };
 134
 135 static int ili211x_read_touch_data(struct i2c_client *client, u8 *data)
 136 {
 137         s16 sum = 0;
 138         int error;
 139         int ret;
 140         int i;
 141
 142         ret = i2c_master_recv(client, data, ILI211X_DATA_SIZE);
 143         if (ret != ILI211X_DATA_SIZE) {
 144                 error = ret < 0 ? ret : -EIO;
 145                 dev_err(&client->dev, "%s failed: %d\n", __func__, error);
 146                 return error;
 147         }
 148
 149         /* This chip uses custom checksum at the end of data */
 150         for (i = 0; i < ILI211X_DATA_SIZE - 1; i++)
 151                 sum = (sum + data[i]) & 0xff;
 152
 153         if ((-sum & 0xff) != data[ILI211X_DATA_SIZE - 1]) {
 154                 dev_err(&client->dev,
 155                         "CRC error (crc=0x%02x expected=0x%02x)\n",
 156                         sum, data[ILI211X_DATA_SIZE - 1]);
 157                 return -EIO;
 158         }
 159
 160         return 0;
 161 }
 162
 163 static bool ili211x_touchdata_to_coords(const u8 *touchdata,
 164                                         unsigned int finger,
 165                                         unsigned int *x, unsigned int *y,
 166                                         unsigned int *z)
 167 {
 168         u32 data;
 169
 170         data = get_unaligned_be32(touchdata + 1 + (finger * 4) + 0);
 171         if (data == 0xffffffff) /* Finger up */
 172                 return false;
 173
 174         *x = ((touchdata[1 + (finger * 4) + 0] & 0xf0) << 4) |
 175              touchdata[1 + (finger * 4) + 1];
 176         *y = ((touchdata[1 + (finger * 4) + 0] & 0x0f) << 8) |
 177              touchdata[1 + (finger * 4) + 2];
 178
 179         return true;
 180 }
 181
 182 static bool ili211x_decline_polling(const u8 *data, bool touch)
 183 {
 184         return false;
 185 }
 186
 187 static const struct ili2xxx_chip ili211x_chip = {
 188         .read_reg               = ili210x_read_reg,
 189         .get_touch_data         = ili211x_read_touch_data,
 190         .parse_touch_data       = ili211x_touchdata_to_coords,
 191         .continue_polling       = ili211x_decline_polling,
 192         .max_touches            = 10,
 193         .resolution             = 2048,
 194 };
 195
 196 static bool ili212x_touchdata_to_coords(const u8 *touchdata,
 197                                         unsigned int finger,
 198                                         unsigned int *x, unsigned int *y,
 199                                         unsigned int *z)
 200 {
 201         u16 val;
 202
 203         val = get_unaligned_be16(touchdata + 3 + (finger * 5) + 0);
 204         if (!(val & BIT(15)))   /* Touch indication */
 205                 return false;
 206
 207         *x = val & 0x3fff;
 208         *y = get_unaligned_be16(touchdata + 3 + (finger * 5) + 2);
 209
 210         return true;
 211 }
 212
 213 static bool ili212x_check_continue_polling(const u8 *data, bool touch)
 214 {
 215         return touch;
 216 }
 217
 218 static const struct ili2xxx_chip ili212x_chip = {
 219         .read_reg               = ili210x_read_reg,
 220         .get_touch_data         = ili210x_read_touch_data,
 221         .parse_touch_data       = ili212x_touchdata_to_coords,
 222         .continue_polling       = ili212x_check_continue_polling,
 223         .max_touches            = 10,
 224         .has_calibrate_reg      = true,
 225 };
 226
 227 static int ili251x_read_reg_common(struct i2c_client *client,
 228                                    u8 reg, void *buf, size_t len,
 229                                    unsigned int delay)
 230 {
 231         int error;
 232         int ret;
 233
 234         ret = i2c_master_send(client, &reg, 1);
 235         if (ret == 1) {
 236                 if (delay)
 237                         usleep_range(delay, delay + 500);
 238
 239                 ret = i2c_master_recv(client, buf, len);
 240                 if (ret == len)
 241                         return 0;
 242         }
 243
 244         error = ret < 0 ? ret : -EIO;
 245         dev_err(&client->dev, "%s failed: %d\n", __func__, error);
 246         return ret;
 247 }
 248
 249 static int ili251x_read_reg(struct i2c_client *client,
 250                             u8 reg, void *buf, size_t len)
 251 {
 252         return ili251x_read_reg_common(client, reg, buf, len, 5000);
 253 }
 254
 255 static int ili251x_read_touch_data(struct i2c_client *client, u8 *data)
 256 {
 257         int error;
 258
 259         error = ili251x_read_reg_common(client, REG_TOUCHDATA,
 260                                         data, ILI251X_DATA_SIZE1, 0);
 261         if (!error && data[0] == 2) {
 262                 error = i2c_master_recv(client, data + ILI251X_DATA_SIZE1,
 263                                         ILI251X_DATA_SIZE2);
 264                 if (error >= 0 && error != ILI251X_DATA_SIZE2)
 265                         error = -EIO;
 266         }
 267
 268         return error;
 269 }
 270
 271 static bool ili251x_touchdata_to_coords(const u8 *touchdata,
 272                                         unsigned int finger,
 273                                         unsigned int *x, unsigned int *y,
 274                                         unsigned int *z)
 275 {
 276         u16 val;
 277
 278         val = get_unaligned_be16(touchdata + 1 + (finger * 5) + 0);
 279         if (!(val & BIT(15)))   /* Touch indication */
 280                 return false;
 281
 282         *x = val & 0x3fff;
 283         *y = get_unaligned_be16(touchdata + 1 + (finger * 5) + 2);
 284         *z = touchdata[1 + (finger * 5) + 4];
 285
 286         return true;
 287 }
 288
 289 static bool ili251x_check_continue_polling(const u8 *data, bool touch)
 290 {
 291         return touch;
 292 }
 293
 294 static const struct ili2xxx_chip ili251x_chip = {
 295         .read_reg               = ili251x_read_reg,
 296         .get_touch_data         = ili251x_read_touch_data,
 297         .parse_touch_data       = ili251x_touchdata_to_coords,
 298         .continue_polling       = ili251x_check_continue_polling,
 299         .max_touches            = 10,
 300         .has_calibrate_reg      = true,
 301         .has_firmware_proto     = true,
 302         .has_pressure_reg       = true,
 303 };
 304
 305 static bool ili210x_report_events(struct ili210x *priv, u8 *touchdata)
 306 {
 307         struct input_dev *input = priv->input;
 308         int i;
 309         bool contact = false, touch;
 310         unsigned int x = 0, y = 0, z = 0;
 311
 312         for (i = 0; i < priv->chip->max_touches; i++) {
 313                 touch = priv->chip->parse_touch_data(touchdata, i, &x, &y, &z);
 314
 315                 input_mt_slot(input, i);
 316                 if (input_mt_report_slot_state(input, MT_TOOL_FINGER, touch)) {
 317                         touchscreen_report_pos(input, &priv->prop, x, y, true);
 318                         if (priv->chip->has_pressure_reg)
 319                                 input_report_abs(input, ABS_MT_PRESSURE, z);
 320                         contact = true;
 321                 }
 322         }
 323
 324         input_mt_report_pointer_emulation(input, false);
 325         input_sync(input);
 326
 327         return contact;
 328 }
 329
 330 static irqreturn_t ili210x_irq(int irq, void *irq_data)
 331 {
 332         struct ili210x *priv = irq_data;
 333         struct i2c_client *client = priv->client;
 334         const struct ili2xxx_chip *chip = priv->chip;
 335         u8 touchdata[ILI210X_DATA_SIZE] = { 0 };
 336         bool keep_polling;
 337         ktime_t time_next;
 338         s64 time_delta;
 339         bool touch;
 340         int error;
 341
 342         do {
 343                 time_next = ktime_add_ms(ktime_get(), ILI2XXX_POLL_PERIOD);
 344                 error = chip->get_touch_data(client, touchdata);
 345                 if (error) {
 346                         dev_err(&client->dev,
 347                                 "Unable to get touch data: %d\n", error);
 348                         break;
 349                 }
 350
 351                 touch = ili210x_report_events(priv, touchdata);
 352                 keep_polling = chip->continue_polling(touchdata, touch);
 353                 if (keep_polling) {
 354                         time_delta = ktime_us_delta(time_next, ktime_get());
 355                         if (time_delta > 0)
 356                                 usleep_range(time_delta, time_delta + 1000);
 357                 }
 358         } while (!priv->stop && keep_polling);
 359
 360         return IRQ_HANDLED;
 361 }
 362
 363 static int ili251x_firmware_update_resolution(struct device *dev)
 364 {
 365         struct i2c_client *client = to_i2c_client(dev);
 366         struct ili210x *priv = i2c_get_clientdata(client);
 367         u16 resx, resy;
 368         u8 rs[10];
 369         int error;
 370
 371         /* The firmware update blob might have changed the resolution. */
 372         error = priv->chip->read_reg(client, REG_PANEL_INFO, &rs, sizeof(rs));
 373         if (!error) {
 374                 resx = le16_to_cpup((__le16 *)rs);
 375                 resy = le16_to_cpup((__le16 *)(rs + 2));
 376
 377                 /* The value reported by the firmware is invalid. */
 378                 if (!resx || resx == 0xffff || !resy || resy == 0xffff)
 379                         error = -EINVAL;
 380         }
 381
 382         /*
 383          * In case of error, the firmware might be stuck in bootloader mode,
 384          * e.g. after a failed firmware update. Set maximum resolution, but
 385          * do not fail to probe, so the user can re-trigger the firmware
 386          * update and recover the touch controller.
 387          */
 388         if (error) {
 389                 dev_warn(dev, "Invalid resolution reported by controller.\n");
 390                 resx = 16384;
 391                 resy = 16384;
 392         }
 393
 394         input_abs_set_max(priv->input, ABS_X, resx - 1);
 395         input_abs_set_max(priv->input, ABS_Y, resy - 1);
 396         input_abs_set_max(priv->input, ABS_MT_POSITION_X, resx - 1);
 397         input_abs_set_max(priv->input, ABS_MT_POSITION_Y, resy - 1);
 398
 399         return error;
 400 }
 401
 402 static ssize_t ili251x_firmware_update_firmware_version(struct device *dev)
 403 {
 404         struct i2c_client *client = to_i2c_client(dev);
 405         struct ili210x *priv = i2c_get_clientdata(client);
 406         int error;
 407         u8 fw[8];
 408
 409         /* Get firmware version */
 410         error = priv->chip->read_reg(client, REG_FIRMWARE_VERSION,
 411                                      &fw, sizeof(fw));
 412         if (!error)
 413                 memcpy(priv->version_firmware, fw, sizeof(fw));
 414
 415         return error;
 416 }
 417
 418 static ssize_t ili251x_firmware_update_kernel_version(struct device *dev)
 419 {
 420         struct i2c_client *client = to_i2c_client(dev);
 421         struct ili210x *priv = i2c_get_clientdata(client);
 422         int error;
 423         u8 kv[5];
 424
 425         /* Get kernel version */
 426         error = priv->chip->read_reg(client, REG_KERNEL_VERSION,
 427                                      &kv, sizeof(kv));
 428         if (!error)
 429                 memcpy(priv->version_kernel, kv, sizeof(kv));
 430
 431         return error;
 432 }
 433
 434 static ssize_t ili251x_firmware_update_protocol_version(struct device *dev)
 435 {
 436         struct i2c_client *client = to_i2c_client(dev);
 437         struct ili210x *priv = i2c_get_clientdata(client);
 438         int error;
 439         u8 pv[2];
 440
 441         /* Get protocol version */
 442         error = priv->chip->read_reg(client, REG_PROTOCOL_VERSION,
 443                                      &pv, sizeof(pv));
 444         if (!error)
 445                 memcpy(priv->version_proto, pv, sizeof(pv));
 446
 447         return error;
 448 }
 449
 450 static ssize_t ili251x_firmware_update_ic_mode(struct device *dev)
 451 {
 452         struct i2c_client *client = to_i2c_client(dev);
 453         struct ili210x *priv = i2c_get_clientdata(client);
 454         int error;
 455         u8 md[2];
 456
 457         /* Get chip boot mode */
 458         error = priv->chip->read_reg(client, REG_GET_MODE, &md, sizeof(md));
 459         if (!error)
 460                 memcpy(priv->ic_mode, md, sizeof(md));
 461
 462         return error;
 463 }
 464
 465 static int ili251x_firmware_update_cached_state(struct device *dev)
 466 {
 467         struct i2c_client *client = to_i2c_client(dev);
 468         struct ili210x *priv = i2c_get_clientdata(client);
 469         int error;
 470
 471         if (!priv->chip->has_firmware_proto)
 472                 return 0;
 473
 474         /* Wait for firmware to boot and stabilize itself. */
 475         msleep(200);
 476
 477         /* Firmware does report valid information. */
 478         error = ili251x_firmware_update_resolution(dev);
 479         if (error)
 480                 return error;
 481
 482         error = ili251x_firmware_update_firmware_version(dev);
 483         if (error)
 484                 return error;
 485
 486         error = ili251x_firmware_update_kernel_version(dev);
 487         if (error)
 488                 return error;
 489
 490         error = ili251x_firmware_update_protocol_version(dev);
 491         if (error)
 492                 return error;
 493
 494         error = ili251x_firmware_update_ic_mode(dev);
 495         if (error)
 496                 return error;
 497
 498         return 0;
 499 }
 500
 501 static ssize_t ili251x_firmware_version_show(struct device *dev,
 502                                              struct device_attribute *attr,
 503                                              char *buf)
 504 {
 505         struct i2c_client *client = to_i2c_client(dev);
 506         struct ili210x *priv = i2c_get_clientdata(client);
 507         u8 *fw = priv->version_firmware;
 508
 509         return sysfs_emit(buf, "%02x%02x.%02x%02x.%02x%02x.%02x%02x\n",
 510                           fw[0], fw[1], fw[2], fw[3],
 511                           fw[4], fw[5], fw[6], fw[7]);
 512 }
 513 static DEVICE_ATTR(firmware_version, 0444, ili251x_firmware_version_show, NULL);
 514
 515 static ssize_t ili251x_kernel_version_show(struct device *dev,
 516                                            struct device_attribute *attr,
 517                                            char *buf)
 518 {
 519         struct i2c_client *client = to_i2c_client(dev);
 520         struct ili210x *priv = i2c_get_clientdata(client);
 521         u8 *kv = priv->version_kernel;
 522
 523         return sysfs_emit(buf, "%02x.%02x.%02x.%02x.%02x\n",
 524                           kv[0], kv[1], kv[2], kv[3], kv[4]);
 525 }
 526 static DEVICE_ATTR(kernel_version, 0444, ili251x_kernel_version_show, NULL);
 527
 528 static ssize_t ili251x_protocol_version_show(struct device *dev,
 529                                              struct device_attribute *attr,
 530                                              char *buf)
 531 {
 532         struct i2c_client *client = to_i2c_client(dev);
 533         struct ili210x *priv = i2c_get_clientdata(client);
 534         u8 *pv = priv->version_proto;
 535
 536         return sysfs_emit(buf, "%02x.%02x\n", pv[0], pv[1]);
 537 }
 538 static DEVICE_ATTR(protocol_version, 0444, ili251x_protocol_version_show, NULL);
 539
 540 static ssize_t ili251x_mode_show(struct device *dev,
 541                                  struct device_attribute *attr, char *buf)
 542 {
 543         struct i2c_client *client = to_i2c_client(dev);
 544         struct ili210x *priv = i2c_get_clientdata(client);
 545         u8 *md = priv->ic_mode;
 546         char *mode = "AP";
 547
 548         if (md[0] == REG_GET_MODE_AP)           /* Application Mode */
 549                 mode = "AP";
 550         else if (md[0] == REG_GET_MODE_BL)      /* BootLoader Mode */
 551                 mode = "BL";
 552         else                                    /* Unknown Mode */
 553                 mode = "??";
 554
 555         return sysfs_emit(buf, "%02x.%02x:%s\n", md[0], md[1], mode);
 556 }
 557 static DEVICE_ATTR(mode, 0444, ili251x_mode_show, NULL);
 558
 559 static ssize_t ili210x_calibrate(struct device *dev,
 560                                  struct device_attribute *attr,
 561                                  const char *buf, size_t count)
 562 {
 563         struct i2c_client *client = to_i2c_client(dev);
 564         struct ili210x *priv = i2c_get_clientdata(client);
 565         unsigned long calibrate;
 566         int rc;
 567         u8 cmd = REG_CALIBRATE;
 568
 569         if (kstrtoul(buf, 10, &calibrate))
 570                 return -EINVAL;
 571
 572         if (calibrate > 1)
 573                 return -EINVAL;
 574
 575         if (calibrate) {
 576                 rc = i2c_master_send(priv->client, &cmd, sizeof(cmd));
 577                 if (rc != sizeof(cmd))
 578                         return -EIO;
 579         }
 580
 581         return count;
 582 }
 583 static DEVICE_ATTR(calibrate, S_IWUSR, NULL, ili210x_calibrate);
 584
 585 static int ili251x_firmware_to_buffer(const struct firmware *fw,
 586                                       u8 **buf, u16 *ac_end, u16 *df_end)
 587 {
 588         const struct ihex_binrec *rec;
 589         u32 fw_addr, fw_last_addr = 0;
 590         u16 fw_len;
 591         u8 *fw_buf;
 592         int error;
 593
 594         /*
 595          * The firmware ihex blob can never be bigger than 64 kiB, so make this
 596          * simple -- allocate a 64 kiB buffer, iterate over the ihex blob records
 597          * once, copy them all into this buffer at the right locations, and then
 598          * do all operations on this linear buffer.
 599          */
 600         fw_buf = kzalloc(SZ_64K, GFP_KERNEL);
 601         if (!fw_buf)
 602                 return -ENOMEM;
 603
 604         rec = (const struct ihex_binrec *)fw->data;
 605         while (rec) {
 606                 fw_addr = be32_to_cpu(rec->addr);
 607                 fw_len = be16_to_cpu(rec->len);
 608
 609                 /* The last 32 Byte firmware block can be 0xffe0 */
 610                 if (fw_addr + fw_len > SZ_64K || fw_addr > SZ_64K - 32) {
 611                         error = -EFBIG;
 612                         goto err_big;
 613                 }
 614
 615                 /* Find the last address before DF start address, that is AC end */
 616                 if (fw_addr == 0xf000)
 617                         *ac_end = fw_last_addr;
 618                 fw_last_addr = fw_addr + fw_len;
 619
 620                 memcpy(fw_buf + fw_addr, rec->data, fw_len);
 621                 rec = ihex_next_binrec(rec);
 622         }
 623
 624         /* DF end address is the last address in the firmware blob */
 625         *df_end = fw_addr + fw_len;
 626         *buf = fw_buf;
 627         return 0;
 628
 629 err_big:
 630         kfree(fw_buf);
 631         return error;
 632 }
 633
 634 /* Switch mode between Application and BootLoader */
 635 static int ili251x_switch_ic_mode(struct i2c_client *client, u8 cmd_mode)
 636 {
 637         struct ili210x *priv = i2c_get_clientdata(client);
 638         u8 cmd_wren[3] = { REG_WRITE_ENABLE, 0x5a, 0xa5 };
 639         u8 md[2];
 640         int error;
 641
 642         error = priv->chip->read_reg(client, REG_GET_MODE, md, sizeof(md));
 643         if (error)
 644                 return error;
 645         /* Mode already set */
 646         if ((cmd_mode == REG_SET_MODE_AP && md[0] == REG_GET_MODE_AP) ||
 647             (cmd_mode == REG_SET_MODE_BL && md[0] == REG_GET_MODE_BL))
 648                 return 0;
 649
 650         /* Unlock writes */
 651         error = i2c_master_send(client, cmd_wren, sizeof(cmd_wren));
 652         if (error != sizeof(cmd_wren))
 653                 return -EINVAL;
 654
 655         mdelay(20);
 656
 657         /* Select mode (BootLoader or Application) */
 658         error = i2c_master_send(client, &cmd_mode, 1);
 659         if (error != 1)
 660                 return -EINVAL;
 661
 662         mdelay(200);    /* Reboot into bootloader takes a lot of time ... */
 663
 664         /* Read back mode */
 665         error = priv->chip->read_reg(client, REG_GET_MODE, md, sizeof(md));
 666         if (error)
 667                 return error;
 668         /* Check if mode is correct now. */
 669         if ((cmd_mode == REG_SET_MODE_AP && md[0] == REG_GET_MODE_AP) ||
 670             (cmd_mode == REG_SET_MODE_BL && md[0] == REG_GET_MODE_BL))
 671                 return 0;
 672
 673         return -EINVAL;
 674 }
 675
 676 static int ili251x_firmware_busy(struct i2c_client *client)
 677 {
 678         struct ili210x *priv = i2c_get_clientdata(client);
 679         int error, i = 0;
 680         u8 data;
 681
 682         do {
 683                 /* The read_reg already contains suitable delay */
 684                 error = priv->chip->read_reg(client, REG_IC_BUSY, &data, 1);
 685                 if (error)
 686                         return error;
 687                 if (i++ == 100000)
 688                         return -ETIMEDOUT;
 689         } while (data != REG_IC_BUSY_NOT_BUSY);
 690
 691         return 0;
 692 }
 693
 694 static int ili251x_firmware_write_to_ic(struct device *dev, u8 *fwbuf,
 695                                         u16 start, u16 end, u8 dataflash)
 696 {
 697         struct i2c_client *client = to_i2c_client(dev);
 698         struct ili210x *priv = i2c_get_clientdata(client);
 699         u8 cmd_crc = REG_READ_DATA_CRC;
 700         u8 crcrb[4] = { 0 };
 701         u8 fw_data[33];
 702         u16 fw_addr;
 703         int error;
 704
 705         /*
 706          * The DF (dataflash) needs 2 bytes offset for unknown reasons,
 707          * the AC (application) has 2 bytes CRC16-CCITT at the end.
 708          */
 709         u16 crc = crc_ccitt(0, fwbuf + start + (dataflash ? 2 : 0),
 710                             end - start - 2);
 711
 712         /* Unlock write to either AC (application) or DF (dataflash) area */
 713         u8 cmd_wr[10] = {
 714                 REG_WRITE_ENABLE, 0x5a, 0xa5, dataflash,
 715                 (end >> 16) & 0xff, (end >> 8) & 0xff, end & 0xff,
 716                 (crc >> 16) & 0xff, (crc >> 8) & 0xff, crc & 0xff
 717         };
 718
 719         error = i2c_master_send(client, cmd_wr, sizeof(cmd_wr));
 720         if (error != sizeof(cmd_wr))
 721                 return -EINVAL;
 722
 723         error = ili251x_firmware_busy(client);
 724         if (error)
 725                 return error;
 726
 727         for (fw_addr = start; fw_addr < end; fw_addr += 32) {
 728                 fw_data[0] = REG_WRITE_DATA;
 729                 memcpy(&(fw_data[1]), fwbuf + fw_addr, 32);
 730                 error = i2c_master_send(client, fw_data, 33);
 731                 if (error != sizeof(fw_data))
 732                         return error;
 733                 error = ili251x_firmware_busy(client);
 734                 if (error)
 735                         return error;
 736         }
 737
 738         error = i2c_master_send(client, &cmd_crc, 1);
 739         if (error != 1)
 740                 return -EINVAL;
 741
 742         error = ili251x_firmware_busy(client);
 743         if (error)
 744                 return error;
 745
 746         error = priv->chip->read_reg(client, REG_READ_DATA_CRC,
 747                                    &crcrb, sizeof(crcrb));
 748         if (error)
 749                 return error;
 750
 751         /* Check CRC readback */
 752         if ((crcrb[0] != (crc & 0xff)) || crcrb[1] != ((crc >> 8) & 0xff))
 753                 return -EINVAL;
 754
 755         return 0;
 756 }
 757
 758 static int ili251x_firmware_reset(struct i2c_client *client)
 759 {
 760         u8 cmd_reset[2] = { 0xf2, 0x01 };
 761         int error;
 762
 763         error = i2c_master_send(client, cmd_reset, sizeof(cmd_reset));
 764         if (error != sizeof(cmd_reset))
 765                 return -EINVAL;
 766
 767         return ili251x_firmware_busy(client);
 768 }
 769
 770 static void ili210x_hardware_reset(struct gpio_desc *reset_gpio)
 771 {
 772         /* Reset the controller */
 773         gpiod_set_value_cansleep(reset_gpio, 1);
 774         usleep_range(12000, 15000);
 775         gpiod_set_value_cansleep(reset_gpio, 0);
 776         msleep(300);
 777 }
 778
 779 static ssize_t ili210x_firmware_update_store(struct device *dev,
 780                                              struct device_attribute *attr,
 781                                              const char *buf, size_t count)
 782 {
 783         struct i2c_client *client = to_i2c_client(dev);
 784         struct ili210x *priv = i2c_get_clientdata(client);
 785         const char *fwname = ILI251X_FW_FILENAME;
 786         const struct firmware *fw;
 787         u16 ac_end, df_end;
 788         u8 *fwbuf;
 789         int error;
 790         int i;
 791
 792         error = request_ihex_firmware(&fw, fwname, dev);
 793         if (error) {
 794                 dev_err(dev, "Failed to request firmware %s, error=%d\n",
 795                         fwname, error);
 796                 return error;
 797         }
 798
 799         error = ili251x_firmware_to_buffer(fw, &fwbuf, &ac_end, &df_end);
 800         release_firmware(fw);
 801         if (error)
 802                 return error;
 803
 804         /*
 805          * Disable touchscreen IRQ, so that we would not get spurious touch
 806          * interrupt during firmware update, and so that the IRQ handler won't
 807          * trigger and interfere with the firmware update. There is no bit in
 808          * the touch controller to disable the IRQs during update, so we have
 809          * to do it this way here.
 810          */
 811         disable_irq(client->irq);
 812
 813         dev_dbg(dev, "Firmware update started, firmware=%s\n", fwname);
 814
 815         ili210x_hardware_reset(priv->reset_gpio);
 816
 817         error = ili251x_firmware_reset(client);
 818         if (error)
 819                 goto exit;
 820
 821         /* This may not succeed on first try, so re-try a few times. */
 822         for (i = 0; i < 5; i++) {
 823                 error = ili251x_switch_ic_mode(client, REG_SET_MODE_BL);
 824                 if (!error)
 825                         break;
 826         }
 827
 828         if (error)
 829                 goto exit;
 830
 831         dev_dbg(dev, "IC is now in BootLoader mode\n");
 832
 833         msleep(200);    /* The bootloader seems to need some time too. */
 834
 835         error = ili251x_firmware_write_to_ic(dev, fwbuf, 0xf000, df_end, 1);
 836         if (error) {
 837                 dev_err(dev, "DF firmware update failed, error=%d\n", error);
 838                 goto exit;
 839         }
 840
 841         dev_dbg(dev, "DataFlash firmware written\n");
 842
 843         error = ili251x_firmware_write_to_ic(dev, fwbuf, 0x2000, ac_end, 0);
 844         if (error) {
 845                 dev_err(dev, "AC firmware update failed, error=%d\n", error);
 846                 goto exit;
 847         }
 848
 849         dev_dbg(dev, "Application firmware written\n");
 850
 851         /* This may not succeed on first try, so re-try a few times. */
 852         for (i = 0; i < 5; i++) {
 853                 error = ili251x_switch_ic_mode(client, REG_SET_MODE_AP);
 854                 if (!error)
 855                         break;
 856         }
 857
 858         if (error)
 859                 goto exit;
 860
 861         dev_dbg(dev, "IC is now in Application mode\n");
 862
 863         error = ili251x_firmware_update_cached_state(dev);
 864         if (error)
 865                 goto exit;
 866
 867         error = count;
 868
 869 exit:
 870         ili210x_hardware_reset(priv->reset_gpio);
 871         dev_dbg(dev, "Firmware update ended, error=%i\n", error);
 872         enable_irq(client->irq);
 873         kfree(fwbuf);
 874         return error;
 875 }
 876
 877 static DEVICE_ATTR(firmware_update, 0200, NULL, ili210x_firmware_update_store);
 878
 879 static struct attribute *ili210x_attributes[] = {
 880         &dev_attr_calibrate.attr,
 881         &dev_attr_firmware_update.attr,
 882         &dev_attr_firmware_version.attr,
 883         &dev_attr_kernel_version.attr,
 884         &dev_attr_protocol_version.attr,
 885         &dev_attr_mode.attr,
 886         NULL,
 887 };
 888
 889 static umode_t ili210x_attributes_visible(struct kobject *kobj,
 890                                           struct attribute *attr, int index)
 891 {
 892         struct device *dev = kobj_to_dev(kobj);
 893         struct i2c_client *client = to_i2c_client(dev);
 894         struct ili210x *priv = i2c_get_clientdata(client);
 895
 896         /* Calibrate is present on all ILI2xxx which have calibrate register */
 897         if (attr == &dev_attr_calibrate.attr)
 898                 return priv->chip->has_calibrate_reg ? attr->mode : 0;
 899
 900         /* Firmware/Kernel/Protocol/BootMode is implememted only for ILI251x */
 901         if (!priv->chip->has_firmware_proto)
 902                 return 0;
 903
 904         return attr->mode;
 905 }
 906
 907 static const struct attribute_group ili210x_attr_group = {
 908         .attrs = ili210x_attributes,
 909         .is_visible = ili210x_attributes_visible,
 910 };
 911
 912 static void ili210x_power_down(void *data)
 913 {
 914         struct gpio_desc *reset_gpio = data;
 915
 916         gpiod_set_value_cansleep(reset_gpio, 1);
 917 }
 918
 919 static void ili210x_stop(void *data)
 920 {
 921         struct ili210x *priv = data;
 922
 923         /* Tell ISR to quit even if there is a contact. */
 924         priv->stop = true;
 925 }
 926
 927 static int ili210x_i2c_probe(struct i2c_client *client)
 928 {
 929         const struct i2c_device_id *id = i2c_client_get_device_id(client);
 930         struct device *dev = &client->dev;
 931         const struct ili2xxx_chip *chip;
 932         struct ili210x *priv;
 933         struct gpio_desc *reset_gpio;
 934         struct input_dev *input;
 935         int error;
 936         unsigned int max_xy;
 937
 938         dev_dbg(dev, "Probing for ILI210X I2C Touschreen driver");
 939
 940         chip = device_get_match_data(dev);
 941         if (!chip && id)
 942                 chip = (const struct ili2xxx_chip *)id->driver_data;
 943         if (!chip) {
 944                 dev_err(&client->dev, "unknown device model\n");
 945                 return -ENODEV;
 946         }
 947
 948         if (client->irq <= 0) {
 949                 dev_err(dev, "No IRQ!\n");
 950                 return -EINVAL;
 951         }
 952
 953         reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
 954         if (IS_ERR(reset_gpio))
 955                 return PTR_ERR(reset_gpio);
 956
 957         if (reset_gpio) {
 958                 error = devm_add_action_or_reset(dev, ili210x_power_down,
 959                                                  reset_gpio);
 960                 if (error)
 961                         return error;
 962
 963                 ili210x_hardware_reset(reset_gpio);
 964         }
 965
 966         priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 967         if (!priv)
 968                 return -ENOMEM;
 969
 970         input = devm_input_allocate_device(dev);
 971         if (!input)
 972                 return -ENOMEM;
 973
 974         priv->client = client;
 975         priv->input = input;
 976         priv->reset_gpio = reset_gpio;
 977         priv->chip = chip;
 978         i2c_set_clientdata(client, priv);
 979
 980         /* Setup input device */
 981         input->name = "ILI210x Touchscreen";
 982         input->id.bustype = BUS_I2C;
 983
 984         /* Multi touch */
 985         max_xy = (chip->resolution ?: SZ_64K) - 1;
 986         input_set_abs_params(input, ABS_MT_POSITION_X, 0, max_xy, 0, 0);
 987         input_set_abs_params(input, ABS_MT_POSITION_Y, 0, max_xy, 0, 0);
 988         if (priv->chip->has_pressure_reg)
 989                 input_set_abs_params(input, ABS_MT_PRESSURE, 0, 0xa, 0, 0);
 990         error = ili251x_firmware_update_cached_state(dev);
 991         if (error)
 992                 dev_warn(dev, "Unable to cache firmware information, err: %d\n",
 993                          error);
 994
 995         touchscreen_parse_properties(input, true, &priv->prop);
 996
 997         error = input_mt_init_slots(input, priv->chip->max_touches,
 998                                     INPUT_MT_DIRECT);
 999         if (error) {
1000                 dev_err(dev, "Unable to set up slots, err: %d\n", error);
1001                 return error;
1002         }
1003
1004         error = devm_request_threaded_irq(dev, client->irq, NULL, ili210x_irq,
1005                                           IRQF_ONESHOT, client->name, priv);
1006         if (error) {
1007                 dev_err(dev, "Unable to request touchscreen IRQ, err: %d\n",
1008                         error);
1009                 return error;
1010         }
1011
1012         error = devm_add_action_or_reset(dev, ili210x_stop, priv);
1013         if (error)
1014                 return error;
1015
1016         error = devm_device_add_group(dev, &ili210x_attr_group);
1017         if (error) {
1018                 dev_err(dev, "Unable to create sysfs attributes, err: %d\n",
1019                         error);
1020                 return error;
1021         }
1022
1023         error = input_register_device(priv->input);
1024         if (error) {
1025                 dev_err(dev, "Cannot register input device, err: %d\n", error);
1026                 return error;
1027         }
1028
1029         return 0;
1030 }
1031
1032 static const struct i2c_device_id ili210x_i2c_id[] = {
1033         { "ili210x", (long)&ili210x_chip },
1034         { "ili2117", (long)&ili211x_chip },
1035         { "ili2120", (long)&ili212x_chip },
1036         { "ili251x", (long)&ili251x_chip },
1037         { }
1038 };
1039 MODULE_DEVICE_TABLE(i2c, ili210x_i2c_id);
1040
1041 static const struct of_device_id ili210x_dt_ids[] = {
1042         { .compatible = "ilitek,ili210x", .data = &ili210x_chip },
1043         { .compatible = "ilitek,ili2117", .data = &ili211x_chip },
1044         { .compatible = "ilitek,ili2120", .data = &ili212x_chip },
1045         { .compatible = "ilitek,ili251x", .data = &ili251x_chip },
1046         { }
1047 };
1048 MODULE_DEVICE_TABLE(of, ili210x_dt_ids);
1049
1050 static struct i2c_driver ili210x_ts_driver = {
1051         .driver = {
1052                 .name = "ili210x_i2c",
1053                 .of_match_table = ili210x_dt_ids,
1054         },
1055         .id_table = ili210x_i2c_id,
1056         .probe = ili210x_i2c_probe,
1057 };
1058
1059 module_i2c_driver(ili210x_ts_driver);
1060
1061 MODULE_AUTHOR("Olivier Sobrie <[email protected]>");
1062 MODULE_DESCRIPTION("ILI210X I2C Touchscreen Driver");
1063 MODULE_LICENSE("GPL");