1 // SPDX-License-Identifier: GPL-2.0-only
3 * PCI driver for the High Speed UART DMA
5 * Copyright (C) 2015 Intel Corporation
8 * Partially based on the bits found in drivers/tty/serial/mfd.c.
11 #include <linux/bitops.h>
12 #include <linux/device.h>
13 #include <linux/interrupt.h>
14 #include <linux/module.h>
15 #include <linux/pci.h>
19 #define HSU_PCI_DMASR 0x00
20 #define HSU_PCI_DMAISR 0x04
22 #define HSU_PCI_CHAN_OFFSET 0x100
24 #define PCI_DEVICE_ID_INTEL_MFLD_HSU_DMA 0x081e
25 #define PCI_DEVICE_ID_INTEL_MRFLD_HSU_DMA 0x1192
27 static irqreturn_t hsu_pci_irq(int irq, void *dev)
29 struct hsu_dma_chip *chip = dev;
36 dmaisr = readl(chip->regs + HSU_PCI_DMAISR);
37 for_each_set_bit(i, &dmaisr, chip->hsu->nr_channels) {
38 err = hsu_dma_get_status(chip, i, &status);
42 ret |= hsu_dma_do_irq(chip, i, status);
45 return IRQ_RETVAL(ret);
48 static void hsu_pci_dma_remove(void *chip)
53 static int hsu_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
55 struct device *dev = &pdev->dev;
56 struct hsu_dma_chip *chip;
59 ret = pcim_enable_device(pdev);
63 ret = pcim_iomap_regions(pdev, BIT(0), pci_name(pdev));
65 dev_err(&pdev->dev, "I/O memory remapping failed\n");
70 pci_try_set_mwi(pdev);
72 ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
76 chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
80 ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES);
84 chip->dev = &pdev->dev;
85 chip->regs = pcim_iomap_table(pdev)[0];
86 chip->length = pci_resource_len(pdev, 0);
87 chip->offset = HSU_PCI_CHAN_OFFSET;
88 chip->irq = pci_irq_vector(pdev, 0);
90 ret = hsu_dma_probe(chip);
94 ret = devm_add_action_or_reset(dev, hsu_pci_dma_remove, chip);
98 ret = devm_request_irq(dev, chip->irq, hsu_pci_irq, 0, "hsu_dma_pci", chip);
103 * On Intel Tangier B0 and Anniedale the interrupt line, disregarding
104 * to have different numbers, is shared between HSU DMA and UART IPs.
105 * Thus on such SoCs we are expecting that IRQ handler is called in
106 * UART driver only. Instead of handling the spurious interrupt
107 * from HSU DMA here and waste CPU time and delay HSU UART interrupt
108 * handling, disable the interrupt entirely.
110 if (pdev->device == PCI_DEVICE_ID_INTEL_MRFLD_HSU_DMA)
111 disable_irq_nosync(chip->irq);
113 pci_set_drvdata(pdev, chip);
118 static const struct pci_device_id hsu_pci_id_table[] = {
119 { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_MFLD_HSU_DMA), 0 },
120 { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_MRFLD_HSU_DMA), 0 },
123 MODULE_DEVICE_TABLE(pci, hsu_pci_id_table);
125 static struct pci_driver hsu_pci_driver = {
126 .name = "hsu_dma_pci",
127 .id_table = hsu_pci_id_table,
128 .probe = hsu_pci_probe,
131 module_pci_driver(hsu_pci_driver);
133 MODULE_LICENSE("GPL v2");
134 MODULE_DESCRIPTION("High Speed UART DMA PCI driver");