drivers/phy/ti/phy-omap-usb2.c

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * omap-usb2.c - USB PHY, talking to USB controller on TI SoCs.
   4  *
   5  * Copyright (C) 2012-2020 Texas Instruments Incorporated - http://www.ti.com
   6  * Author: Kishon Vijay Abraham I <[email protected]>
   7  */
   8
   9 #include <linux/clk.h>
  10 #include <linux/delay.h>
  11 #include <linux/err.h>
  12 #include <linux/io.h>
  13 #include <linux/mfd/syscon.h>
  14 #include <linux/module.h>
  15 #include <linux/of.h>
  16 #include <linux/of_platform.h>
  17 #include <linux/phy/omap_control_phy.h>
  18 #include <linux/phy/omap_usb.h>
  19 #include <linux/phy/phy.h>
  20 #include <linux/platform_device.h>
  21 #include <linux/pm_runtime.h>
  22 #include <linux/regmap.h>
  23 #include <linux/slab.h>
  24 #include <linux/sys_soc.h>
  25 #include <linux/usb/phy_companion.h>
  26
  27 #define USB2PHY_ANA_CONFIG1             0x4c
  28 #define USB2PHY_DISCON_BYP_LATCH        BIT(31)
  29
  30 #define USB2PHY_CHRG_DET                        0x14
  31 #define USB2PHY_CHRG_DET_USE_CHG_DET_REG        BIT(29)
  32 #define USB2PHY_CHRG_DET_DIS_CHG_DET            BIT(28)
  33
  34 /* SoC Specific USB2_OTG register definitions */
  35 #define AM654_USB2_OTG_PD               BIT(8)
  36 #define AM654_USB2_VBUS_DET_EN          BIT(5)
  37 #define AM654_USB2_VBUSVALID_DET_EN     BIT(4)
  38
  39 #define OMAP_DEV_PHY_PD         BIT(0)
  40 #define OMAP_USB2_PHY_PD        BIT(28)
  41
  42 #define AM437X_USB2_PHY_PD              BIT(0)
  43 #define AM437X_USB2_OTG_PD              BIT(1)
  44 #define AM437X_USB2_OTGVDET_EN          BIT(19)
  45 #define AM437X_USB2_OTGSESSEND_EN       BIT(20)
  46
  47 /* Driver Flags */
  48 #define OMAP_USB2_HAS_START_SRP                 BIT(0)
  49 #define OMAP_USB2_HAS_SET_VBUS                  BIT(1)
  50 #define OMAP_USB2_CALIBRATE_FALSE_DISCONNECT    BIT(2)
  51 #define OMAP_USB2_DISABLE_CHRG_DET              BIT(3)
  52
  53 struct omap_usb {
  54         struct usb_phy          phy;
  55         struct phy_companion    *comparator;
  56         void __iomem            *pll_ctrl_base;
  57         void __iomem            *phy_base;
  58         struct device           *dev;
  59         struct device           *control_dev;
  60         struct clk              *wkupclk;
  61         struct clk              *optclk;
  62         u8                      flags;
  63         struct regmap           *syscon_phy_power; /* ctrl. reg. acces */
  64         unsigned int            power_reg; /* power reg. index within syscon */
  65         u32                     mask;
  66         u32                     power_on;
  67         u32                     power_off;
  68 };
  69
  70 #define phy_to_omapusb(x)       container_of((x), struct omap_usb, phy)
  71
  72 struct usb_phy_data {
  73         const char *label;
  74         u8 flags;
  75         u32 mask;
  76         u32 power_on;
  77         u32 power_off;
  78 };
  79
  80 static inline u32 omap_usb_readl(void __iomem *addr, unsigned int offset)
  81 {
  82         return __raw_readl(addr + offset);
  83 }
  84
  85 static inline void omap_usb_writel(void __iomem *addr, unsigned int offset,
  86                                    u32 data)
  87 {
  88         __raw_writel(data, addr + offset);
  89 }
  90
  91 /**
  92  * omap_usb2_set_comparator() - links the comparator present in the system with this phy
  93  *
  94  * @comparator:  the companion phy(comparator) for this phy
  95  *
  96  * The phy companion driver should call this API passing the phy_companion
  97  * filled with set_vbus and start_srp to be used by usb phy.
  98  *
  99  * For use by phy companion driver
 100  */
 101 int omap_usb2_set_comparator(struct phy_companion *comparator)
 102 {
 103         struct omap_usb *phy;
 104         struct usb_phy  *x = usb_get_phy(USB_PHY_TYPE_USB2);
 105
 106         if (IS_ERR(x))
 107                 return -ENODEV;
 108
 109         phy = phy_to_omapusb(x);
 110         phy->comparator = comparator;
 111         return 0;
 112 }
 113 EXPORT_SYMBOL_GPL(omap_usb2_set_comparator);
 114
 115 static int omap_usb_set_vbus(struct usb_otg *otg, bool enabled)
 116 {
 117         struct omap_usb *phy = phy_to_omapusb(otg->usb_phy);
 118
 119         if (!phy->comparator)
 120                 return -ENODEV;
 121
 122         return phy->comparator->set_vbus(phy->comparator, enabled);
 123 }
 124
 125 static int omap_usb_start_srp(struct usb_otg *otg)
 126 {
 127         struct omap_usb *phy = phy_to_omapusb(otg->usb_phy);
 128
 129         if (!phy->comparator)
 130                 return -ENODEV;
 131
 132         return phy->comparator->start_srp(phy->comparator);
 133 }
 134
 135 static int omap_usb_set_host(struct usb_otg *otg, struct usb_bus *host)
 136 {
 137         otg->host = host;
 138         if (!host)
 139                 otg->state = OTG_STATE_UNDEFINED;
 140
 141         return 0;
 142 }
 143
 144 static int omap_usb_set_peripheral(struct usb_otg *otg,
 145                                    struct usb_gadget *gadget)
 146 {
 147         otg->gadget = gadget;
 148         if (!gadget)
 149                 otg->state = OTG_STATE_UNDEFINED;
 150
 151         return 0;
 152 }
 153
 154 static int omap_usb_phy_power(struct omap_usb *phy, int on)
 155 {
 156         u32 val;
 157         int ret;
 158
 159         if (!phy->syscon_phy_power) {
 160                 omap_control_phy_power(phy->control_dev, on);
 161                 return 0;
 162         }
 163
 164         if (on)
 165                 val = phy->power_on;
 166         else
 167                 val = phy->power_off;
 168
 169         ret = regmap_update_bits(phy->syscon_phy_power, phy->power_reg,
 170                                  phy->mask, val);
 171         return ret;
 172 }
 173
 174 static int omap_usb_power_off(struct phy *x)
 175 {
 176         struct omap_usb *phy = phy_get_drvdata(x);
 177
 178         return omap_usb_phy_power(phy, false);
 179 }
 180
 181 static int omap_usb_power_on(struct phy *x)
 182 {
 183         struct omap_usb *phy = phy_get_drvdata(x);
 184
 185         return omap_usb_phy_power(phy, true);
 186 }
 187
 188 static int omap_usb2_disable_clocks(struct omap_usb *phy)
 189 {
 190         clk_disable_unprepare(phy->wkupclk);
 191         if (!IS_ERR(phy->optclk))
 192                 clk_disable_unprepare(phy->optclk);
 193
 194         return 0;
 195 }
 196
 197 static int omap_usb2_enable_clocks(struct omap_usb *phy)
 198 {
 199         int ret;
 200
 201         ret = clk_prepare_enable(phy->wkupclk);
 202         if (ret < 0) {
 203                 dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret);
 204                 goto err0;
 205         }
 206
 207         if (!IS_ERR(phy->optclk)) {
 208                 ret = clk_prepare_enable(phy->optclk);
 209                 if (ret < 0) {
 210                         dev_err(phy->dev, "Failed to enable optclk %d\n", ret);
 211                         goto err1;
 212                 }
 213         }
 214
 215         return 0;
 216
 217 err1:
 218         clk_disable_unprepare(phy->wkupclk);
 219
 220 err0:
 221         return ret;
 222 }
 223
 224 static int omap_usb_init(struct phy *x)
 225 {
 226         struct omap_usb *phy = phy_get_drvdata(x);
 227         u32 val;
 228
 229         omap_usb2_enable_clocks(phy);
 230
 231         if (phy->flags & OMAP_USB2_CALIBRATE_FALSE_DISCONNECT) {
 232                 /*
 233                  *
 234                  * Reduce the sensitivity of internal PHY by enabling the
 235                  * DISCON_BYP_LATCH of the USB2PHY_ANA_CONFIG1 register. This
 236                  * resolves issues with certain devices which can otherwise
 237                  * be prone to false disconnects.
 238                  *
 239                  */
 240                 val = omap_usb_readl(phy->phy_base, USB2PHY_ANA_CONFIG1);
 241                 val |= USB2PHY_DISCON_BYP_LATCH;
 242                 omap_usb_writel(phy->phy_base, USB2PHY_ANA_CONFIG1, val);
 243         }
 244
 245         if (phy->flags & OMAP_USB2_DISABLE_CHRG_DET) {
 246                 val = omap_usb_readl(phy->phy_base, USB2PHY_CHRG_DET);
 247                 val |= USB2PHY_CHRG_DET_USE_CHG_DET_REG |
 248                        USB2PHY_CHRG_DET_DIS_CHG_DET;
 249                 omap_usb_writel(phy->phy_base, USB2PHY_CHRG_DET, val);
 250         }
 251
 252         return 0;
 253 }
 254
 255 static int omap_usb_exit(struct phy *x)
 256 {
 257         struct omap_usb *phy = phy_get_drvdata(x);
 258
 259         return omap_usb2_disable_clocks(phy);
 260 }
 261
 262 static const struct phy_ops ops = {
 263         .init           = omap_usb_init,
 264         .exit           = omap_usb_exit,
 265         .power_on       = omap_usb_power_on,
 266         .power_off      = omap_usb_power_off,
 267         .owner          = THIS_MODULE,
 268 };
 269
 270 static const struct usb_phy_data omap_usb2_data = {
 271         .label = "omap_usb2",
 272         .flags = OMAP_USB2_HAS_START_SRP | OMAP_USB2_HAS_SET_VBUS,
 273         .mask = OMAP_DEV_PHY_PD,
 274         .power_off = OMAP_DEV_PHY_PD,
 275 };
 276
 277 static const struct usb_phy_data omap5_usb2_data = {
 278         .label = "omap5_usb2",
 279         .flags = 0,
 280         .mask = OMAP_DEV_PHY_PD,
 281         .power_off = OMAP_DEV_PHY_PD,
 282 };
 283
 284 static const struct usb_phy_data dra7x_usb2_data = {
 285         .label = "dra7x_usb2",
 286         .flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT,
 287         .mask = OMAP_DEV_PHY_PD,
 288         .power_off = OMAP_DEV_PHY_PD,
 289 };
 290
 291 static const struct usb_phy_data dra7x_usb2_phy2_data = {
 292         .label = "dra7x_usb2_phy2",
 293         .flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT,
 294         .mask = OMAP_USB2_PHY_PD,
 295         .power_off = OMAP_USB2_PHY_PD,
 296 };
 297
 298 static const struct usb_phy_data am437x_usb2_data = {
 299         .label = "am437x_usb2",
 300         .flags =  0,
 301         .mask = AM437X_USB2_PHY_PD | AM437X_USB2_OTG_PD |
 302                 AM437X_USB2_OTGVDET_EN | AM437X_USB2_OTGSESSEND_EN,
 303         .power_on = AM437X_USB2_OTGVDET_EN | AM437X_USB2_OTGSESSEND_EN,
 304         .power_off = AM437X_USB2_PHY_PD | AM437X_USB2_OTG_PD,
 305 };
 306
 307 static const struct usb_phy_data am654_usb2_data = {
 308         .label = "am654_usb2",
 309         .flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT,
 310         .mask = AM654_USB2_OTG_PD | AM654_USB2_VBUS_DET_EN |
 311                 AM654_USB2_VBUSVALID_DET_EN,
 312         .power_on = AM654_USB2_VBUS_DET_EN | AM654_USB2_VBUSVALID_DET_EN,
 313         .power_off = AM654_USB2_OTG_PD,
 314 };
 315
 316 static const struct of_device_id omap_usb2_id_table[] = {
 317         {
 318                 .compatible = "ti,omap-usb2",
 319                 .data = &omap_usb2_data,
 320         },
 321         {
 322                 .compatible = "ti,omap5-usb2",
 323                 .data = &omap5_usb2_data,
 324         },
 325         {
 326                 .compatible = "ti,dra7x-usb2",
 327                 .data = &dra7x_usb2_data,
 328         },
 329         {
 330                 .compatible = "ti,dra7x-usb2-phy2",
 331                 .data = &dra7x_usb2_phy2_data,
 332         },
 333         {
 334                 .compatible = "ti,am437x-usb2",
 335                 .data = &am437x_usb2_data,
 336         },
 337         {
 338                 .compatible = "ti,am654-usb2",
 339                 .data = &am654_usb2_data,
 340         },
 341         {},
 342 };
 343 MODULE_DEVICE_TABLE(of, omap_usb2_id_table);
 344
 345 static void omap_usb2_init_errata(struct omap_usb *phy)
 346 {
 347         static const struct soc_device_attribute am65x_sr10_soc_devices[] = {
 348                 { .family = "AM65X", .revision = "SR1.0" },
 349                 { /* sentinel */ }
 350         };
 351
 352         /*
 353          * Errata i2075: USB2PHY: USB2PHY Charger Detect is Enabled by
 354          * Default Without VBUS Presence.
 355          *
 356          * AM654x SR1.0 has a silicon bug due to which D+ is pulled high after
 357          * POR, which could cause enumeration failure with some USB hubs.
 358          * Disabling the USB2_PHY Charger Detect function will put D+
 359          * into the normal state.
 360          */
 361         if (soc_device_match(am65x_sr10_soc_devices))
 362                 phy->flags |= OMAP_USB2_DISABLE_CHRG_DET;
 363 }
 364
 365 static int omap_usb2_probe(struct platform_device *pdev)
 366 {
 367         struct omap_usb *phy;
 368         struct phy *generic_phy;
 369         struct phy_provider *phy_provider;
 370         struct usb_otg *otg;
 371         struct device_node *node = pdev->dev.of_node;
 372         struct device_node *control_node;
 373         struct platform_device *control_pdev;
 374         const struct of_device_id *of_id;
 375         struct usb_phy_data *phy_data;
 376
 377         of_id = of_match_device(omap_usb2_id_table, &pdev->dev);
 378
 379         if (!of_id)
 380                 return -EINVAL;
 381
 382         phy_data = (struct usb_phy_data *)of_id->data;
 383
 384         phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
 385         if (!phy)
 386                 return -ENOMEM;
 387
 388         otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
 389         if (!otg)
 390                 return -ENOMEM;
 391
 392         phy->dev                = &pdev->dev;
 393
 394         phy->phy.dev            = phy->dev;
 395         phy->phy.label          = phy_data->label;
 396         phy->phy.otg            = otg;
 397         phy->phy.type           = USB_PHY_TYPE_USB2;
 398         phy->mask               = phy_data->mask;
 399         phy->power_on           = phy_data->power_on;
 400         phy->power_off          = phy_data->power_off;
 401         phy->flags              = phy_data->flags;
 402
 403         omap_usb2_init_errata(phy);
 404
 405         phy->phy_base = devm_platform_ioremap_resource(pdev, 0);
 406         if (IS_ERR(phy->phy_base))
 407                 return PTR_ERR(phy->phy_base);
 408
 409         phy->syscon_phy_power = syscon_regmap_lookup_by_phandle(node,
 410                                                                 "syscon-phy-power");
 411         if (IS_ERR(phy->syscon_phy_power)) {
 412                 dev_dbg(&pdev->dev,
 413                         "can't get syscon-phy-power, using control device\n");
 414                 phy->syscon_phy_power = NULL;
 415
 416                 control_node = of_parse_phandle(node, "ctrl-module", 0);
 417                 if (!control_node) {
 418                         dev_err(&pdev->dev,
 419                                 "Failed to get control device phandle\n");
 420                         return -EINVAL;
 421                 }
 422
 423                 control_pdev = of_find_device_by_node(control_node);
 424                 if (!control_pdev) {
 425                         dev_err(&pdev->dev, "Failed to get control device\n");
 426                         return -EINVAL;
 427                 }
 428                 phy->control_dev = &control_pdev->dev;
 429         } else {
 430                 if (of_property_read_u32_index(node,
 431                                                "syscon-phy-power", 1,
 432                                                &phy->power_reg)) {
 433                         dev_err(&pdev->dev,
 434                                 "couldn't get power reg. offset\n");
 435                         return -EINVAL;
 436                 }
 437         }
 438
 439         phy->wkupclk = devm_clk_get(phy->dev, "wkupclk");
 440         if (IS_ERR(phy->wkupclk)) {
 441                 if (PTR_ERR(phy->wkupclk) == -EPROBE_DEFER)
 442                         return -EPROBE_DEFER;
 443
 444                 dev_warn(&pdev->dev, "unable to get wkupclk %ld, trying old name\n",
 445                          PTR_ERR(phy->wkupclk));
 446                 phy->wkupclk = devm_clk_get(phy->dev, "usb_phy_cm_clk32k");
 447
 448                 if (IS_ERR(phy->wkupclk))
 449                         return dev_err_probe(&pdev->dev, PTR_ERR(phy->wkupclk),
 450                                              "unable to get usb_phy_cm_clk32k\n");
 451
 452                 dev_warn(&pdev->dev,
 453                          "found usb_phy_cm_clk32k, please fix DTS\n");
 454         }
 455
 456         phy->optclk = devm_clk_get(phy->dev, "refclk");
 457         if (IS_ERR(phy->optclk)) {
 458                 if (PTR_ERR(phy->optclk) == -EPROBE_DEFER)
 459                         return -EPROBE_DEFER;
 460
 461                 dev_dbg(&pdev->dev, "unable to get refclk, trying old name\n");
 462                 phy->optclk = devm_clk_get(phy->dev, "usb_otg_ss_refclk960m");
 463
 464                 if (IS_ERR(phy->optclk)) {
 465                         if (PTR_ERR(phy->optclk) != -EPROBE_DEFER) {
 466                                 dev_dbg(&pdev->dev,
 467                                         "unable to get usb_otg_ss_refclk960m\n");
 468                         }
 469                 } else {
 470                         dev_warn(&pdev->dev,
 471                                  "found usb_otg_ss_refclk960m, please fix DTS\n");
 472                 }
 473         }
 474
 475         otg->set_host = omap_usb_set_host;
 476         otg->set_peripheral = omap_usb_set_peripheral;
 477         if (phy_data->flags & OMAP_USB2_HAS_SET_VBUS)
 478                 otg->set_vbus = omap_usb_set_vbus;
 479         if (phy_data->flags & OMAP_USB2_HAS_START_SRP)
 480                 otg->start_srp = omap_usb_start_srp;
 481         otg->usb_phy = &phy->phy;
 482
 483         platform_set_drvdata(pdev, phy);
 484         pm_runtime_enable(phy->dev);
 485
 486         generic_phy = devm_phy_create(phy->dev, NULL, &ops);
 487         if (IS_ERR(generic_phy)) {
 488                 pm_runtime_disable(phy->dev);
 489                 return PTR_ERR(generic_phy);
 490         }
 491
 492         phy_set_drvdata(generic_phy, phy);
 493         omap_usb_power_off(generic_phy);
 494
 495         phy_provider = devm_of_phy_provider_register(phy->dev,
 496                                                      of_phy_simple_xlate);
 497         if (IS_ERR(phy_provider)) {
 498                 pm_runtime_disable(phy->dev);
 499                 return PTR_ERR(phy_provider);
 500         }
 501
 502         usb_add_phy_dev(&phy->phy);
 503
 504         return 0;
 505 }
 506
 507 static void omap_usb2_remove(struct platform_device *pdev)
 508 {
 509         struct omap_usb *phy = platform_get_drvdata(pdev);
 510
 511         usb_remove_phy(&phy->phy);
 512         pm_runtime_disable(phy->dev);
 513 }
 514
 515 static struct platform_driver omap_usb2_driver = {
 516         .probe          = omap_usb2_probe,
 517         .remove_new     = omap_usb2_remove,
 518         .driver         = {
 519                 .name   = "omap-usb2",
 520                 .of_match_table = omap_usb2_id_table,
 521         },
 522 };
 523
 524 module_platform_driver(omap_usb2_driver);
 525
 526 MODULE_ALIAS("platform:omap_usb2");
 527 MODULE_AUTHOR("Texas Instruments Inc.");
 528 MODULE_DESCRIPTION("OMAP USB2 phy driver");
 529 MODULE_LICENSE("GPL v2");