2 * linux/arch/arm/mach-pxa/lubbock.c
4 * Support for the Intel DBPXA250 Development Platform.
6 * Author: Nicolas Pitre
7 * Created: Jun 15, 2001
8 * Copyright: MontaVista Software Inc.
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
14 #include <linux/module.h>
15 #include <linux/kernel.h>
16 #include <linux/init.h>
17 #include <linux/platform_device.h>
18 #include <linux/sysdev.h>
19 #include <linux/major.h>
21 #include <linux/interrupt.h>
22 #include <linux/mtd/mtd.h>
23 #include <linux/mtd/partitions.h>
24 #include <linux/smc91x.h>
26 #include <linux/spi/spi.h>
27 #include <linux/spi/ads7846.h>
28 #include <linux/spi/pxa2xx_spi.h>
30 #include <asm/setup.h>
31 #include <asm/memory.h>
32 #include <asm/mach-types.h>
33 #include <mach/hardware.h>
35 #include <asm/sizes.h>
37 #include <asm/mach/arch.h>
38 #include <asm/mach/map.h>
39 #include <asm/mach/irq.h>
40 #include <asm/mach/flash.h>
42 #include <asm/hardware/sa1111.h>
44 #include <mach/pxa25x.h>
45 #include <mach/gpio.h>
46 #include <mach/audio.h>
47 #include <mach/lubbock.h>
49 #include <mach/irda.h>
50 #include <mach/pxafb.h>
53 #include <mach/smemc.h>
59 static unsigned long lubbock_pin_config[] __initdata = {
60 GPIO15_nCS_1, /* CS1 - Flash */
61 GPIO78_nCS_2, /* CS2 - Baseboard FGPA */
62 GPIO79_nCS_3, /* CS3 - SMC ethernet */
63 GPIO80_nCS_4, /* CS4 - SA1111 */
72 GPIO29_AC97_SDATA_IN_0,
73 GPIO30_AC97_SDATA_OUT,
76 /* LCD - 16bpp DSTN */
77 GPIOxx_LCD_DSTN_16BPP,
102 GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
105 #define LUB_HEXLED __LUB_REG(LUBBOCK_FPGA_PHYS + 0x010)
106 #define LUB_MISC_WR __LUB_REG(LUBBOCK_FPGA_PHYS + 0x080)
108 void lubbock_set_hexled(uint32_t value)
113 void lubbock_set_misc_wr(unsigned int mask, unsigned int set)
117 local_irq_save(flags);
118 LUB_MISC_WR = (LUB_MISC_WR & ~mask) | (set & mask);
119 local_irq_restore(flags);
121 EXPORT_SYMBOL(lubbock_set_misc_wr);
123 static unsigned long lubbock_irq_enabled;
125 static void lubbock_mask_irq(unsigned int irq)
127 int lubbock_irq = (irq - LUBBOCK_IRQ(0));
128 LUB_IRQ_MASK_EN = (lubbock_irq_enabled &= ~(1 << lubbock_irq));
131 static void lubbock_unmask_irq(unsigned int irq)
133 int lubbock_irq = (irq - LUBBOCK_IRQ(0));
134 /* the irq can be acknowledged only if deasserted, so it's done here */
135 LUB_IRQ_SET_CLR &= ~(1 << lubbock_irq);
136 LUB_IRQ_MASK_EN = (lubbock_irq_enabled |= (1 << lubbock_irq));
139 static struct irq_chip lubbock_irq_chip = {
141 .ack = lubbock_mask_irq,
142 .mask = lubbock_mask_irq,
143 .unmask = lubbock_unmask_irq,
146 static void lubbock_irq_handler(unsigned int irq, struct irq_desc *desc)
148 unsigned long pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
150 desc->chip->ack(irq); /* clear our parent irq */
151 if (likely(pending)) {
152 irq = LUBBOCK_IRQ(0) + __ffs(pending);
153 generic_handle_irq(irq);
155 pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
159 static void __init lubbock_init_irq(void)
165 /* setup extra lubbock irqs */
166 for (irq = LUBBOCK_IRQ(0); irq <= LUBBOCK_LAST_IRQ; irq++) {
167 set_irq_chip(irq, &lubbock_irq_chip);
168 set_irq_handler(irq, handle_level_irq);
169 set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
172 set_irq_chained_handler(IRQ_GPIO(0), lubbock_irq_handler);
173 set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING);
178 static int lubbock_irq_resume(struct sys_device *dev)
180 LUB_IRQ_MASK_EN = lubbock_irq_enabled;
184 static struct sysdev_class lubbock_irq_sysclass = {
186 .resume = lubbock_irq_resume,
189 static struct sys_device lubbock_irq_device = {
190 .cls = &lubbock_irq_sysclass,
193 static int __init lubbock_irq_device_init(void)
197 if (machine_is_lubbock()) {
198 ret = sysdev_class_register(&lubbock_irq_sysclass);
200 ret = sysdev_register(&lubbock_irq_device);
205 device_initcall(lubbock_irq_device_init);
209 static int lubbock_udc_is_connected(void)
211 return (LUB_MISC_RD & (1 << 9)) == 0;
214 static struct pxa2xx_udc_mach_info udc_info __initdata = {
215 .udc_is_connected = lubbock_udc_is_connected,
216 // no D+ pullup; lubbock can't connect/disconnect in software
219 static struct resource sa1111_resources[] = {
223 .flags = IORESOURCE_MEM,
226 .start = LUBBOCK_SA1111_IRQ,
227 .end = LUBBOCK_SA1111_IRQ,
228 .flags = IORESOURCE_IRQ,
232 static struct sa1111_platform_data sa1111_info = {
233 .irq_base = LUBBOCK_SA1111_IRQ_BASE,
236 static struct platform_device sa1111_device = {
239 .num_resources = ARRAY_SIZE(sa1111_resources),
240 .resource = sa1111_resources,
242 .platform_data = &sa1111_info,
246 /* ADS7846 is connected through SSP ... and if your board has J5 populated,
247 * you can select it to replace the ucb1400 by switching the touchscreen cable
248 * (to J5) and poking board registers (as done below). Else it's only useful
249 * for the temperature sensors.
251 static struct pxa2xx_spi_master pxa_ssp_master_info = {
255 static int lubbock_ads7846_pendown_state(void)
257 /* TS_BUSY is bit 8 in LUB_MISC_RD, but pendown is irq-only */
261 static struct ads7846_platform_data ads_info = {
263 .vref_delay_usecs = 100, /* internal, no cap */
264 .get_pendown_state = lubbock_ads7846_pendown_state,
265 // .x_plate_ohms = 500, /* GUESS! */
266 // .y_plate_ohms = 500, /* GUESS! */
269 static void ads7846_cs(u32 command)
271 static const unsigned TS_nCS = 1 << 11;
272 lubbock_set_misc_wr(TS_nCS, (command == PXA2XX_CS_ASSERT) ? 0 : TS_nCS);
275 static struct pxa2xx_spi_chip ads_hw = {
278 .cs_control = ads7846_cs,
281 static struct spi_board_info spi_board_info[] __initdata = { {
282 .modalias = "ads7846",
283 .platform_data = &ads_info,
284 .controller_data = &ads_hw,
285 .irq = LUBBOCK_BB_IRQ,
286 .max_speed_hz = 120000 /* max sample rate at 3V */
287 * 26 /* command + data + overhead */,
293 static struct resource smc91x_resources[] = {
295 .name = "smc91x-regs",
298 .flags = IORESOURCE_MEM,
301 .start = LUBBOCK_ETH_IRQ,
302 .end = LUBBOCK_ETH_IRQ,
303 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
306 .name = "smc91x-attrib",
309 .flags = IORESOURCE_MEM,
313 static struct smc91x_platdata lubbock_smc91x_info = {
314 .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_2,
317 static struct platform_device smc91x_device = {
320 .num_resources = ARRAY_SIZE(smc91x_resources),
321 .resource = smc91x_resources,
323 .platform_data = &lubbock_smc91x_info,
327 static struct resource flash_resources[] = {
331 .flags = IORESOURCE_MEM,
335 .end = 0x04000000 + SZ_64M - 1,
336 .flags = IORESOURCE_MEM,
340 static struct mtd_partition lubbock_partitions[] = {
342 .name = "Bootloader",
345 .mask_flags = MTD_WRITEABLE /* force read-only */
349 .offset = 0x00040000,
351 .name = "Filesystem",
352 .size = MTDPART_SIZ_FULL,
357 static struct flash_platform_data lubbock_flash_data[2] = {
359 .map_name = "cfi_probe",
360 .parts = lubbock_partitions,
361 .nr_parts = ARRAY_SIZE(lubbock_partitions),
363 .map_name = "cfi_probe",
369 static struct platform_device lubbock_flash_device[2] = {
371 .name = "pxa2xx-flash",
374 .platform_data = &lubbock_flash_data[0],
376 .resource = &flash_resources[0],
380 .name = "pxa2xx-flash",
383 .platform_data = &lubbock_flash_data[1],
385 .resource = &flash_resources[1],
390 static struct platform_device *devices[] __initdata = {
393 &lubbock_flash_device[0],
394 &lubbock_flash_device[1],
397 static struct pxafb_mode_info sharp_lm8v31_mode = {
408 .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
412 static struct pxafb_mach_info sharp_lm8v31 = {
413 .modes = &sharp_lm8v31_mode,
417 .lcd_conn = LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL |
418 LCD_AC_BIAS_FREQ(255),
421 #define MMC_POLL_RATE msecs_to_jiffies(1000)
423 static void lubbock_mmc_poll(unsigned long);
424 static irq_handler_t mmc_detect_int;
426 static struct timer_list mmc_timer = {
427 .function = lubbock_mmc_poll,
430 static void lubbock_mmc_poll(unsigned long data)
434 /* clear any previous irq state, then ... */
435 local_irq_save(flags);
436 LUB_IRQ_SET_CLR &= ~(1 << 0);
437 local_irq_restore(flags);
439 /* poll until mmc/sd card is removed */
440 if (LUB_IRQ_SET_CLR & (1 << 0))
441 mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE);
443 (void) mmc_detect_int(LUBBOCK_SD_IRQ, (void *)data);
444 enable_irq(LUBBOCK_SD_IRQ);
448 static irqreturn_t lubbock_detect_int(int irq, void *data)
450 /* IRQ is level triggered; disable, and poll for removal */
452 mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE);
454 return mmc_detect_int(irq, data);
457 static int lubbock_mci_init(struct device *dev,
458 irq_handler_t detect_int,
461 /* detect card insert/eject */
462 mmc_detect_int = detect_int;
463 init_timer(&mmc_timer);
464 mmc_timer.data = (unsigned long) data;
465 return request_irq(LUBBOCK_SD_IRQ, lubbock_detect_int,
466 IRQF_SAMPLE_RANDOM, "lubbock-sd-detect", data);
469 static int lubbock_mci_get_ro(struct device *dev)
471 return (LUB_MISC_RD & (1 << 2)) != 0;
474 static void lubbock_mci_exit(struct device *dev, void *data)
476 free_irq(LUBBOCK_SD_IRQ, data);
477 del_timer_sync(&mmc_timer);
480 static struct pxamci_platform_data lubbock_mci_platform_data = {
481 .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
482 .detect_delay_ms = 10,
483 .init = lubbock_mci_init,
484 .get_ro = lubbock_mci_get_ro,
485 .exit = lubbock_mci_exit,
486 .gpio_card_detect = -1,
491 static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
495 local_irq_save(flags);
496 if (mode & IR_SIRMODE) {
497 LUB_MISC_WR &= ~(1 << 4);
498 } else if (mode & IR_FIRMODE) {
499 LUB_MISC_WR |= 1 << 4;
501 pxa2xx_transceiver_mode(dev, mode);
502 local_irq_restore(flags);
505 static struct pxaficp_platform_data lubbock_ficp_platform_data = {
507 .transceiver_cap = IR_SIRMODE | IR_FIRMODE,
508 .transceiver_mode = lubbock_irda_transceiver_mode,
511 static void __init lubbock_init(void)
513 int flashboot = (LUB_CONF_SWITCHES & 1);
515 pxa2xx_mfp_config(ARRAY_AND_SIZE(lubbock_pin_config));
517 pxa_set_ffuart_info(NULL);
518 pxa_set_btuart_info(NULL);
519 pxa_set_stuart_info(NULL);
521 clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL);
522 pxa_set_udc_info(&udc_info);
523 set_pxa_fb_info(&sharp_lm8v31);
524 pxa_set_mci_info(&lubbock_mci_platform_data);
525 pxa_set_ficp_info(&lubbock_ficp_platform_data);
526 pxa_set_ac97_info(NULL);
528 lubbock_flash_data[0].width = lubbock_flash_data[1].width =
529 (__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
530 /* Compensate for the nROMBT switch which swaps the flash banks */
531 printk(KERN_NOTICE "Lubbock configured to boot from %s (bank %d)\n",
532 flashboot?"Flash":"ROM", flashboot);
534 lubbock_flash_data[flashboot^1].name = "application-flash";
535 lubbock_flash_data[flashboot].name = "boot-rom";
536 (void) platform_add_devices(devices, ARRAY_SIZE(devices));
538 pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
539 spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
542 static struct map_desc lubbock_io_desc[] __initdata = {
544 .virtual = LUBBOCK_FPGA_VIRT,
545 .pfn = __phys_to_pfn(LUBBOCK_FPGA_PHYS),
546 .length = 0x00100000,
551 static void __init lubbock_map_io(void)
554 iotable_init(lubbock_io_desc, ARRAY_SIZE(lubbock_io_desc));
559 MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)")
560 /* Maintainer: MontaVista Software Inc. */
561 .map_io = lubbock_map_io,
562 .nr_irqs = LUBBOCK_NR_IRQS,
563 .init_irq = lubbock_init_irq,
565 .init_machine = lubbock_init,