Documentation/ABI/testing/sysfs-class-net-mesh

   1
   2 What:           /sys/class/net/<mesh_iface>/mesh/aggregated_ogms
   3 Date:           May 2010
   4 Contact:        Marek Lindner <[email protected]>
   5 Description:
   6                 Indicates whether the batman protocol messages of the
   7                 mesh <mesh_iface> shall be aggregated or not.
   8
   9 What:           /sys/class/net/<mesh_iface>/mesh/<vlan_subdir>/ap_isolation
  10 Date:           May 2011
  11 Contact:        Antonio Quartulli <[email protected]>
  12 Description:
  13                 Indicates whether the data traffic going from a
  14                 wireless client to another wireless client will be
  15                 silently dropped. <vlan_subdir> is empty when referring
  16                 to the untagged lan.
  17
  18 What:           /sys/class/net/<mesh_iface>/mesh/bonding
  19 Date:           June 2010
  20 Contact:        Simon Wunderlich <[email protected]>
  21 Description:
  22                 Indicates whether the data traffic going through the
  23                 mesh will be sent using multiple interfaces at the
  24                 same time (if available).
  25
  26 What:           /sys/class/net/<mesh_iface>/mesh/bridge_loop_avoidance
  27 Date:           November 2011
  28 Contact:        Simon Wunderlich <[email protected]>
  29 Description:
  30                 Indicates whether the bridge loop avoidance feature
  31                 is enabled. This feature detects and avoids loops
  32                 between the mesh and devices bridged with the soft
  33                 interface <mesh_iface>.
  34
  35 What:           /sys/class/net/<mesh_iface>/mesh/fragmentation
  36 Date:           October 2010
  37 Contact:        Andreas Langer <[email protected]>
  38 Description:
  39                 Indicates whether the data traffic going through the
  40                 mesh will be fragmented or silently discarded if the
  41                 packet size exceeds the outgoing interface MTU.
  42
  43 What:           /sys/class/net/<mesh_iface>/mesh/gw_bandwidth
  44 Date:           October 2010
  45 Contact:        Marek Lindner <[email protected]>
  46 Description:
  47                 Defines the bandwidth which is propagated by this
  48                 node if gw_mode was set to 'server'.
  49
  50 What:           /sys/class/net/<mesh_iface>/mesh/gw_mode
  51 Date:           October 2010
  52 Contact:        Marek Lindner <[email protected]>
  53 Description:
  54                 Defines the state of the gateway features. Can be
  55                 either 'off', 'client' or 'server'.
  56
  57 What:           /sys/class/net/<mesh_iface>/mesh/gw_sel_class
  58 Date:           October 2010
  59 Contact:        Marek Lindner <[email protected]>
  60 Description:
  61                 Defines the selection criteria this node will use
  62                 to choose a gateway if gw_mode was set to 'client'.
  63
  64 What:           /sys/class/net/<mesh_iface>/mesh/hop_penalty
  65 Date:           Oct 2010
  66 Contact:        Linus Lüssing <[email protected]>
  67 Description:
  68                 Defines the penalty which will be applied to an
  69                 originator message's tq-field on every hop.
  70
  71 What:           /sys/class/net/<mesh_iface>/mesh/isolation_mark
  72 Date:           Nov 2013
  73 Contact:        Antonio Quartulli <[email protected]>
  74 Description:
  75                 Defines the isolation mark (and its bitmask) which
  76                 is used to classify clients as "isolated" by the
  77                 Extended Isolation feature.
  78
  79 What:           /sys/class/net/<mesh_iface>/mesh/multicast_mode
  80 Date:           Feb 2014
  81 Contact:        Linus Lüssing <[email protected]>
  82 Description:
  83                 Indicates whether multicast optimizations are enabled
  84                 or disabled. If set to zero then all nodes in the
  85                 mesh are going to use classic flooding for any
  86                 multicast packet with no optimizations.
  87
  88 What:           /sys/class/net/<mesh_iface>/mesh/network_coding
  89 Date:           Nov 2012
  90 Contact:        Martin Hundeboll <[email protected]>
  91 Description:
  92                 Controls whether Network Coding (using some magic
  93                 to send fewer wifi packets but still the same
  94                 content) is enabled or not.
  95
  96 What:           /sys/class/net/<mesh_iface>/mesh/orig_interval
  97 Date:           May 2010
  98 Contact:        Marek Lindner <[email protected]>
  99 Description:
 100                 Defines the interval in milliseconds in which batman
 101                 sends its protocol messages.
 102
 103 What:           /sys/class/net/<mesh_iface>/mesh/routing_algo
 104 Date:           Dec 2011
 105 Contact:        Marek Lindner <[email protected]>
 106 Description:
 107                 Defines the routing procotol this mesh instance
 108                 uses to find the optimal paths through the mesh.