]>
Commit | Line | Data |
---|---|---|
20f733e7 BR |
1 | /* |
2 | * sata_mv.c - Marvell SATA support | |
3 | * | |
40f21b11 | 4 | * Copyright 2008-2009: Marvell Corporation, all rights reserved. |
8b260248 | 5 | * Copyright 2005: EMC Corporation, all rights reserved. |
e2b1be56 | 6 | * Copyright 2005 Red Hat, Inc. All rights reserved. |
20f733e7 | 7 | * |
40f21b11 ML |
8 | * Originally written by Brett Russ. |
9 | * Extensive overhaul and enhancement by Mark Lord <[email protected]>. | |
10 | * | |
20f733e7 BR |
11 | * Please ALWAYS copy [email protected] on emails. |
12 | * | |
13 | * This program is free software; you can redistribute it and/or modify | |
14 | * it under the terms of the GNU General Public License as published by | |
15 | * the Free Software Foundation; version 2 of the License. | |
16 | * | |
17 | * This program is distributed in the hope that it will be useful, | |
18 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
19 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
20 | * GNU General Public License for more details. | |
21 | * | |
22 | * You should have received a copy of the GNU General Public License | |
23 | * along with this program; if not, write to the Free Software | |
24 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
25 | * | |
26 | */ | |
27 | ||
4a05e209 | 28 | /* |
85afb934 ML |
29 | * sata_mv TODO list: |
30 | * | |
85afb934 ML |
31 | * --> Develop a low-power-consumption strategy, and implement it. |
32 | * | |
2b748a0a | 33 | * --> Add sysfs attributes for per-chip / per-HC IRQ coalescing thresholds. |
85afb934 ML |
34 | * |
35 | * --> [Experiment, Marvell value added] Is it possible to use target | |
36 | * mode to cross-connect two Linux boxes with Marvell cards? If so, | |
37 | * creating LibATA target mode support would be very interesting. | |
38 | * | |
39 | * Target mode, for those without docs, is the ability to directly | |
40 | * connect two SATA ports. | |
41 | */ | |
4a05e209 | 42 | |
65ad7fef ML |
43 | /* |
44 | * 80x1-B2 errata PCI#11: | |
45 | * | |
46 | * Users of the 6041/6081 Rev.B2 chips (current is C0) | |
47 | * should be careful to insert those cards only onto PCI-X bus #0, | |
48 | * and only in device slots 0..7, not higher. The chips may not | |
49 | * work correctly otherwise (note: this is a pretty rare condition). | |
50 | */ | |
51 | ||
20f733e7 BR |
52 | #include <linux/kernel.h> |
53 | #include <linux/module.h> | |
54 | #include <linux/pci.h> | |
55 | #include <linux/init.h> | |
56 | #include <linux/blkdev.h> | |
57 | #include <linux/delay.h> | |
58 | #include <linux/interrupt.h> | |
8d8b6004 | 59 | #include <linux/dmapool.h> |
20f733e7 | 60 | #include <linux/dma-mapping.h> |
a9524a76 | 61 | #include <linux/device.h> |
c77a2f4e | 62 | #include <linux/clk.h> |
f351b2d6 SB |
63 | #include <linux/platform_device.h> |
64 | #include <linux/ata_platform.h> | |
15a32632 | 65 | #include <linux/mbus.h> |
c46938cc | 66 | #include <linux/bitops.h> |
5a0e3ad6 | 67 | #include <linux/gfp.h> |
97b414e1 AL |
68 | #include <linux/of.h> |
69 | #include <linux/of_irq.h> | |
20f733e7 | 70 | #include <scsi/scsi_host.h> |
193515d5 | 71 | #include <scsi/scsi_cmnd.h> |
6c08772e | 72 | #include <scsi/scsi_device.h> |
20f733e7 | 73 | #include <linux/libata.h> |
20f733e7 BR |
74 | |
75 | #define DRV_NAME "sata_mv" | |
cae5a29d | 76 | #define DRV_VERSION "1.28" |
20f733e7 | 77 | |
40f21b11 ML |
78 | /* |
79 | * module options | |
80 | */ | |
81 | ||
40f21b11 | 82 | #ifdef CONFIG_PCI |
13b74085 | 83 | static int msi; |
40f21b11 ML |
84 | module_param(msi, int, S_IRUGO); |
85 | MODULE_PARM_DESC(msi, "Enable use of PCI MSI (0=off, 1=on)"); | |
86 | #endif | |
87 | ||
2b748a0a ML |
88 | static int irq_coalescing_io_count; |
89 | module_param(irq_coalescing_io_count, int, S_IRUGO); | |
90 | MODULE_PARM_DESC(irq_coalescing_io_count, | |
91 | "IRQ coalescing I/O count threshold (0..255)"); | |
92 | ||
93 | static int irq_coalescing_usecs; | |
94 | module_param(irq_coalescing_usecs, int, S_IRUGO); | |
95 | MODULE_PARM_DESC(irq_coalescing_usecs, | |
96 | "IRQ coalescing time threshold in usecs"); | |
97 | ||
20f733e7 BR |
98 | enum { |
99 | /* BAR's are enumerated in terms of pci_resource_start() terms */ | |
100 | MV_PRIMARY_BAR = 0, /* offset 0x10: memory space */ | |
101 | MV_IO_BAR = 2, /* offset 0x18: IO space */ | |
102 | MV_MISC_BAR = 3, /* offset 0x1c: FLASH, NVRAM, SRAM */ | |
103 | ||
104 | MV_MAJOR_REG_AREA_SZ = 0x10000, /* 64KB */ | |
105 | MV_MINOR_REG_AREA_SZ = 0x2000, /* 8KB */ | |
106 | ||
2b748a0a ML |
107 | /* For use with both IRQ coalescing methods ("all ports" or "per-HC" */ |
108 | COAL_CLOCKS_PER_USEC = 150, /* for calculating COAL_TIMEs */ | |
109 | MAX_COAL_TIME_THRESHOLD = ((1 << 24) - 1), /* internal clocks count */ | |
110 | MAX_COAL_IO_COUNT = 255, /* completed I/O count */ | |
111 | ||
20f733e7 | 112 | MV_PCI_REG_BASE = 0, |
615ab953 | 113 | |
2b748a0a ML |
114 | /* |
115 | * Per-chip ("all ports") interrupt coalescing feature. | |
116 | * This is only for GEN_II / GEN_IIE hardware. | |
117 | * | |
118 | * Coalescing defers the interrupt until either the IO_THRESHOLD | |
119 | * (count of completed I/Os) is met, or the TIME_THRESHOLD is met. | |
120 | */ | |
cae5a29d ML |
121 | COAL_REG_BASE = 0x18000, |
122 | IRQ_COAL_CAUSE = (COAL_REG_BASE + 0x08), | |
2b748a0a ML |
123 | ALL_PORTS_COAL_IRQ = (1 << 4), /* all ports irq event */ |
124 | ||
cae5a29d ML |
125 | IRQ_COAL_IO_THRESHOLD = (COAL_REG_BASE + 0xcc), |
126 | IRQ_COAL_TIME_THRESHOLD = (COAL_REG_BASE + 0xd0), | |
2b748a0a ML |
127 | |
128 | /* | |
129 | * Registers for the (unused here) transaction coalescing feature: | |
130 | */ | |
cae5a29d ML |
131 | TRAN_COAL_CAUSE_LO = (COAL_REG_BASE + 0x88), |
132 | TRAN_COAL_CAUSE_HI = (COAL_REG_BASE + 0x8c), | |
2b748a0a | 133 | |
cae5a29d ML |
134 | SATAHC0_REG_BASE = 0x20000, |
135 | FLASH_CTL = 0x1046c, | |
136 | GPIO_PORT_CTL = 0x104f0, | |
137 | RESET_CFG = 0x180d8, | |
20f733e7 BR |
138 | |
139 | MV_PCI_REG_SZ = MV_MAJOR_REG_AREA_SZ, | |
140 | MV_SATAHC_REG_SZ = MV_MAJOR_REG_AREA_SZ, | |
141 | MV_SATAHC_ARBTR_REG_SZ = MV_MINOR_REG_AREA_SZ, /* arbiter */ | |
142 | MV_PORT_REG_SZ = MV_MINOR_REG_AREA_SZ, | |
143 | ||
31961943 BR |
144 | MV_MAX_Q_DEPTH = 32, |
145 | MV_MAX_Q_DEPTH_MASK = MV_MAX_Q_DEPTH - 1, | |
146 | ||
147 | /* CRQB needs alignment on a 1KB boundary. Size == 1KB | |
148 | * CRPB needs alignment on a 256B boundary. Size == 256B | |
31961943 BR |
149 | * ePRD (SG) entries need alignment on a 16B boundary. Size == 16B |
150 | */ | |
151 | MV_CRQB_Q_SZ = (32 * MV_MAX_Q_DEPTH), | |
152 | MV_CRPB_Q_SZ = (8 * MV_MAX_Q_DEPTH), | |
da2fa9ba | 153 | MV_MAX_SG_CT = 256, |
31961943 | 154 | MV_SG_TBL_SZ = (16 * MV_MAX_SG_CT), |
31961943 | 155 | |
352fab70 | 156 | /* Determine hc from 0-7 port: hc = port >> MV_PORT_HC_SHIFT */ |
20f733e7 | 157 | MV_PORT_HC_SHIFT = 2, |
352fab70 ML |
158 | MV_PORTS_PER_HC = (1 << MV_PORT_HC_SHIFT), /* 4 */ |
159 | /* Determine hc port from 0-7 port: hardport = port & MV_PORT_MASK */ | |
160 | MV_PORT_MASK = (MV_PORTS_PER_HC - 1), /* 3 */ | |
20f733e7 BR |
161 | |
162 | /* Host Flags */ | |
163 | MV_FLAG_DUAL_HC = (1 << 30), /* two SATA Host Controllers */ | |
7bb3c529 | 164 | |
9cbe056f | 165 | MV_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_PIO_POLLING, |
ad3aef51 | 166 | |
91b1a84c | 167 | MV_GEN_I_FLAGS = MV_COMMON_FLAGS | ATA_FLAG_NO_ATAPI, |
20f733e7 | 168 | |
40f21b11 ML |
169 | MV_GEN_II_FLAGS = MV_COMMON_FLAGS | ATA_FLAG_NCQ | |
170 | ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA, | |
91b1a84c ML |
171 | |
172 | MV_GEN_IIE_FLAGS = MV_GEN_II_FLAGS | ATA_FLAG_AN, | |
ad3aef51 | 173 | |
31961943 BR |
174 | CRQB_FLAG_READ = (1 << 0), |
175 | CRQB_TAG_SHIFT = 1, | |
c5d3e45a | 176 | CRQB_IOID_SHIFT = 6, /* CRQB Gen-II/IIE IO Id shift */ |
e12bef50 | 177 | CRQB_PMP_SHIFT = 12, /* CRQB Gen-II/IIE PMP shift */ |
c5d3e45a | 178 | CRQB_HOSTQ_SHIFT = 17, /* CRQB Gen-II/IIE HostQueTag shift */ |
31961943 BR |
179 | CRQB_CMD_ADDR_SHIFT = 8, |
180 | CRQB_CMD_CS = (0x2 << 11), | |
181 | CRQB_CMD_LAST = (1 << 15), | |
182 | ||
183 | CRPB_FLAG_STATUS_SHIFT = 8, | |
c5d3e45a JG |
184 | CRPB_IOID_SHIFT_6 = 5, /* CRPB Gen-II IO Id shift */ |
185 | CRPB_IOID_SHIFT_7 = 7, /* CRPB Gen-IIE IO Id shift */ | |
31961943 BR |
186 | |
187 | EPRD_FLAG_END_OF_TBL = (1 << 31), | |
188 | ||
20f733e7 BR |
189 | /* PCI interface registers */ |
190 | ||
cae5a29d ML |
191 | MV_PCI_COMMAND = 0xc00, |
192 | MV_PCI_COMMAND_MWRCOM = (1 << 4), /* PCI Master Write Combining */ | |
193 | MV_PCI_COMMAND_MRDTRIG = (1 << 7), /* PCI Master Read Trigger */ | |
31961943 | 194 | |
cae5a29d | 195 | PCI_MAIN_CMD_STS = 0xd30, |
20f733e7 BR |
196 | STOP_PCI_MASTER = (1 << 2), |
197 | PCI_MASTER_EMPTY = (1 << 3), | |
198 | GLOB_SFT_RST = (1 << 4), | |
199 | ||
cae5a29d | 200 | MV_PCI_MODE = 0xd00, |
8e7decdb ML |
201 | MV_PCI_MODE_MASK = 0x30, |
202 | ||
522479fb JG |
203 | MV_PCI_EXP_ROM_BAR_CTL = 0xd2c, |
204 | MV_PCI_DISC_TIMER = 0xd04, | |
205 | MV_PCI_MSI_TRIGGER = 0xc38, | |
206 | MV_PCI_SERR_MASK = 0xc28, | |
cae5a29d | 207 | MV_PCI_XBAR_TMOUT = 0x1d04, |
522479fb JG |
208 | MV_PCI_ERR_LOW_ADDRESS = 0x1d40, |
209 | MV_PCI_ERR_HIGH_ADDRESS = 0x1d44, | |
210 | MV_PCI_ERR_ATTRIBUTE = 0x1d48, | |
211 | MV_PCI_ERR_COMMAND = 0x1d50, | |
212 | ||
cae5a29d ML |
213 | PCI_IRQ_CAUSE = 0x1d58, |
214 | PCI_IRQ_MASK = 0x1d5c, | |
20f733e7 BR |
215 | PCI_UNMASK_ALL_IRQS = 0x7fffff, /* bits 22-0 */ |
216 | ||
cae5a29d ML |
217 | PCIE_IRQ_CAUSE = 0x1900, |
218 | PCIE_IRQ_MASK = 0x1910, | |
646a4da5 | 219 | PCIE_UNMASK_ALL_IRQS = 0x40a, /* assorted bits */ |
02a121da | 220 | |
7368f919 | 221 | /* Host Controller Main Interrupt Cause/Mask registers (1 per-chip) */ |
cae5a29d ML |
222 | PCI_HC_MAIN_IRQ_CAUSE = 0x1d60, |
223 | PCI_HC_MAIN_IRQ_MASK = 0x1d64, | |
224 | SOC_HC_MAIN_IRQ_CAUSE = 0x20020, | |
225 | SOC_HC_MAIN_IRQ_MASK = 0x20024, | |
40f21b11 ML |
226 | ERR_IRQ = (1 << 0), /* shift by (2 * port #) */ |
227 | DONE_IRQ = (1 << 1), /* shift by (2 * port #) */ | |
20f733e7 BR |
228 | HC0_IRQ_PEND = 0x1ff, /* bits 0-8 = HC0's ports */ |
229 | HC_SHIFT = 9, /* bits 9-17 = HC1's ports */ | |
2b748a0a ML |
230 | DONE_IRQ_0_3 = 0x000000aa, /* DONE_IRQ ports 0,1,2,3 */ |
231 | DONE_IRQ_4_7 = (DONE_IRQ_0_3 << HC_SHIFT), /* 4,5,6,7 */ | |
20f733e7 | 232 | PCI_ERR = (1 << 18), |
40f21b11 ML |
233 | TRAN_COAL_LO_DONE = (1 << 19), /* transaction coalescing */ |
234 | TRAN_COAL_HI_DONE = (1 << 20), /* transaction coalescing */ | |
235 | PORTS_0_3_COAL_DONE = (1 << 8), /* HC0 IRQ coalescing */ | |
236 | PORTS_4_7_COAL_DONE = (1 << 17), /* HC1 IRQ coalescing */ | |
237 | ALL_PORTS_COAL_DONE = (1 << 21), /* GEN_II(E) IRQ coalescing */ | |
20f733e7 BR |
238 | GPIO_INT = (1 << 22), |
239 | SELF_INT = (1 << 23), | |
240 | TWSI_INT = (1 << 24), | |
241 | HC_MAIN_RSVD = (0x7f << 25), /* bits 31-25 */ | |
fb621e2f | 242 | HC_MAIN_RSVD_5 = (0x1fff << 19), /* bits 31-19 */ |
e12bef50 | 243 | HC_MAIN_RSVD_SOC = (0x3fffffb << 6), /* bits 31-9, 7-6 */ |
20f733e7 BR |
244 | |
245 | /* SATAHC registers */ | |
cae5a29d | 246 | HC_CFG = 0x00, |
20f733e7 | 247 | |
cae5a29d | 248 | HC_IRQ_CAUSE = 0x14, |
352fab70 ML |
249 | DMA_IRQ = (1 << 0), /* shift by port # */ |
250 | HC_COAL_IRQ = (1 << 4), /* IRQ coalescing */ | |
20f733e7 BR |
251 | DEV_IRQ = (1 << 8), /* shift by port # */ |
252 | ||
2b748a0a ML |
253 | /* |
254 | * Per-HC (Host-Controller) interrupt coalescing feature. | |
255 | * This is present on all chip generations. | |
256 | * | |
257 | * Coalescing defers the interrupt until either the IO_THRESHOLD | |
258 | * (count of completed I/Os) is met, or the TIME_THRESHOLD is met. | |
259 | */ | |
cae5a29d ML |
260 | HC_IRQ_COAL_IO_THRESHOLD = 0x000c, |
261 | HC_IRQ_COAL_TIME_THRESHOLD = 0x0010, | |
2b748a0a | 262 | |
cae5a29d | 263 | SOC_LED_CTRL = 0x2c, |
000b344f ML |
264 | SOC_LED_CTRL_BLINK = (1 << 0), /* Active LED blink */ |
265 | SOC_LED_CTRL_ACT_PRESENCE = (1 << 2), /* Multiplex dev presence */ | |
266 | /* with dev activity LED */ | |
267 | ||
20f733e7 | 268 | /* Shadow block registers */ |
cae5a29d ML |
269 | SHD_BLK = 0x100, |
270 | SHD_CTL_AST = 0x20, /* ofs from SHD_BLK */ | |
20f733e7 BR |
271 | |
272 | /* SATA registers */ | |
cae5a29d ML |
273 | SATA_STATUS = 0x300, /* ctrl, err regs follow status */ |
274 | SATA_ACTIVE = 0x350, | |
275 | FIS_IRQ_CAUSE = 0x364, | |
276 | FIS_IRQ_CAUSE_AN = (1 << 9), /* async notification */ | |
17c5aab5 | 277 | |
cae5a29d | 278 | LTMODE = 0x30c, /* requires read-after-write */ |
17c5aab5 ML |
279 | LTMODE_BIT8 = (1 << 8), /* unknown, but necessary */ |
280 | ||
cae5a29d | 281 | PHY_MODE2 = 0x330, |
47c2b677 | 282 | PHY_MODE3 = 0x310, |
cae5a29d ML |
283 | |
284 | PHY_MODE4 = 0x314, /* requires read-after-write */ | |
ba069e37 ML |
285 | PHY_MODE4_CFG_MASK = 0x00000003, /* phy internal config field */ |
286 | PHY_MODE4_CFG_VALUE = 0x00000001, /* phy internal config field */ | |
287 | PHY_MODE4_RSVD_ZEROS = 0x5de3fffa, /* Gen2e always write zeros */ | |
288 | PHY_MODE4_RSVD_ONES = 0x00000005, /* Gen2e always write ones */ | |
289 | ||
cae5a29d ML |
290 | SATA_IFCTL = 0x344, |
291 | SATA_TESTCTL = 0x348, | |
292 | SATA_IFSTAT = 0x34c, | |
293 | VENDOR_UNIQUE_FIS = 0x35c, | |
17c5aab5 | 294 | |
cae5a29d | 295 | FISCFG = 0x360, |
8e7decdb ML |
296 | FISCFG_WAIT_DEV_ERR = (1 << 8), /* wait for host on DevErr */ |
297 | FISCFG_SINGLE_SYNC = (1 << 16), /* SYNC on DMA activation */ | |
17c5aab5 | 298 | |
29b7e43c MM |
299 | PHY_MODE9_GEN2 = 0x398, |
300 | PHY_MODE9_GEN1 = 0x39c, | |
301 | PHYCFG_OFS = 0x3a0, /* only in 65n devices */ | |
302 | ||
c9d39130 | 303 | MV5_PHY_MODE = 0x74, |
cae5a29d ML |
304 | MV5_LTMODE = 0x30, |
305 | MV5_PHY_CTL = 0x0C, | |
306 | SATA_IFCFG = 0x050, | |
bca1c4eb JG |
307 | |
308 | MV_M2_PREAMP_MASK = 0x7e0, | |
20f733e7 BR |
309 | |
310 | /* Port registers */ | |
cae5a29d | 311 | EDMA_CFG = 0, |
0c58912e ML |
312 | EDMA_CFG_Q_DEPTH = 0x1f, /* max device queue depth */ |
313 | EDMA_CFG_NCQ = (1 << 5), /* for R/W FPDMA queued */ | |
314 | EDMA_CFG_NCQ_GO_ON_ERR = (1 << 14), /* continue on error */ | |
315 | EDMA_CFG_RD_BRST_EXT = (1 << 11), /* read burst 512B */ | |
316 | EDMA_CFG_WR_BUFF_LEN = (1 << 13), /* write buffer 512B */ | |
e12bef50 ML |
317 | EDMA_CFG_EDMA_FBS = (1 << 16), /* EDMA FIS-Based Switching */ |
318 | EDMA_CFG_FBS = (1 << 26), /* FIS-Based Switching */ | |
20f733e7 | 319 | |
cae5a29d ML |
320 | EDMA_ERR_IRQ_CAUSE = 0x8, |
321 | EDMA_ERR_IRQ_MASK = 0xc, | |
6c1153e0 JG |
322 | EDMA_ERR_D_PAR = (1 << 0), /* UDMA data parity err */ |
323 | EDMA_ERR_PRD_PAR = (1 << 1), /* UDMA PRD parity err */ | |
324 | EDMA_ERR_DEV = (1 << 2), /* device error */ | |
325 | EDMA_ERR_DEV_DCON = (1 << 3), /* device disconnect */ | |
326 | EDMA_ERR_DEV_CON = (1 << 4), /* device connected */ | |
327 | EDMA_ERR_SERR = (1 << 5), /* SError bits [WBDST] raised */ | |
c5d3e45a JG |
328 | EDMA_ERR_SELF_DIS = (1 << 7), /* Gen II/IIE self-disable */ |
329 | EDMA_ERR_SELF_DIS_5 = (1 << 8), /* Gen I self-disable */ | |
6c1153e0 | 330 | EDMA_ERR_BIST_ASYNC = (1 << 8), /* BIST FIS or Async Notify */ |
c5d3e45a | 331 | EDMA_ERR_TRANS_IRQ_7 = (1 << 8), /* Gen IIE transprt layer irq */ |
6c1153e0 JG |
332 | EDMA_ERR_CRQB_PAR = (1 << 9), /* CRQB parity error */ |
333 | EDMA_ERR_CRPB_PAR = (1 << 10), /* CRPB parity error */ | |
334 | EDMA_ERR_INTRL_PAR = (1 << 11), /* internal parity error */ | |
335 | EDMA_ERR_IORDY = (1 << 12), /* IORdy timeout */ | |
646a4da5 | 336 | |
6c1153e0 | 337 | EDMA_ERR_LNK_CTRL_RX = (0xf << 13), /* link ctrl rx error */ |
646a4da5 ML |
338 | EDMA_ERR_LNK_CTRL_RX_0 = (1 << 13), /* transient: CRC err */ |
339 | EDMA_ERR_LNK_CTRL_RX_1 = (1 << 14), /* transient: FIFO err */ | |
340 | EDMA_ERR_LNK_CTRL_RX_2 = (1 << 15), /* fatal: caught SYNC */ | |
341 | EDMA_ERR_LNK_CTRL_RX_3 = (1 << 16), /* transient: FIS rx err */ | |
342 | ||
6c1153e0 | 343 | EDMA_ERR_LNK_DATA_RX = (0xf << 17), /* link data rx error */ |
646a4da5 | 344 | |
6c1153e0 | 345 | EDMA_ERR_LNK_CTRL_TX = (0x1f << 21), /* link ctrl tx error */ |
646a4da5 ML |
346 | EDMA_ERR_LNK_CTRL_TX_0 = (1 << 21), /* transient: CRC err */ |
347 | EDMA_ERR_LNK_CTRL_TX_1 = (1 << 22), /* transient: FIFO err */ | |
348 | EDMA_ERR_LNK_CTRL_TX_2 = (1 << 23), /* transient: caught SYNC */ | |
349 | EDMA_ERR_LNK_CTRL_TX_3 = (1 << 24), /* transient: caught DMAT */ | |
350 | EDMA_ERR_LNK_CTRL_TX_4 = (1 << 25), /* transient: FIS collision */ | |
351 | ||
6c1153e0 | 352 | EDMA_ERR_LNK_DATA_TX = (0x1f << 26), /* link data tx error */ |
646a4da5 | 353 | |
6c1153e0 | 354 | EDMA_ERR_TRANS_PROTO = (1 << 31), /* transport protocol error */ |
c5d3e45a JG |
355 | EDMA_ERR_OVERRUN_5 = (1 << 5), |
356 | EDMA_ERR_UNDERRUN_5 = (1 << 6), | |
646a4da5 ML |
357 | |
358 | EDMA_ERR_IRQ_TRANSIENT = EDMA_ERR_LNK_CTRL_RX_0 | | |
359 | EDMA_ERR_LNK_CTRL_RX_1 | | |
360 | EDMA_ERR_LNK_CTRL_RX_3 | | |
85afb934 | 361 | EDMA_ERR_LNK_CTRL_TX, |
646a4da5 | 362 | |
bdd4ddde JG |
363 | EDMA_EH_FREEZE = EDMA_ERR_D_PAR | |
364 | EDMA_ERR_PRD_PAR | | |
365 | EDMA_ERR_DEV_DCON | | |
366 | EDMA_ERR_DEV_CON | | |
367 | EDMA_ERR_SERR | | |
368 | EDMA_ERR_SELF_DIS | | |
6c1153e0 | 369 | EDMA_ERR_CRQB_PAR | |
bdd4ddde JG |
370 | EDMA_ERR_CRPB_PAR | |
371 | EDMA_ERR_INTRL_PAR | | |
372 | EDMA_ERR_IORDY | | |
373 | EDMA_ERR_LNK_CTRL_RX_2 | | |
374 | EDMA_ERR_LNK_DATA_RX | | |
375 | EDMA_ERR_LNK_DATA_TX | | |
376 | EDMA_ERR_TRANS_PROTO, | |
e12bef50 | 377 | |
bdd4ddde JG |
378 | EDMA_EH_FREEZE_5 = EDMA_ERR_D_PAR | |
379 | EDMA_ERR_PRD_PAR | | |
380 | EDMA_ERR_DEV_DCON | | |
381 | EDMA_ERR_DEV_CON | | |
382 | EDMA_ERR_OVERRUN_5 | | |
383 | EDMA_ERR_UNDERRUN_5 | | |
384 | EDMA_ERR_SELF_DIS_5 | | |
6c1153e0 | 385 | EDMA_ERR_CRQB_PAR | |
bdd4ddde JG |
386 | EDMA_ERR_CRPB_PAR | |
387 | EDMA_ERR_INTRL_PAR | | |
388 | EDMA_ERR_IORDY, | |
20f733e7 | 389 | |
cae5a29d ML |
390 | EDMA_REQ_Q_BASE_HI = 0x10, |
391 | EDMA_REQ_Q_IN_PTR = 0x14, /* also contains BASE_LO */ | |
31961943 | 392 | |
cae5a29d | 393 | EDMA_REQ_Q_OUT_PTR = 0x18, |
31961943 BR |
394 | EDMA_REQ_Q_PTR_SHIFT = 5, |
395 | ||
cae5a29d ML |
396 | EDMA_RSP_Q_BASE_HI = 0x1c, |
397 | EDMA_RSP_Q_IN_PTR = 0x20, | |
398 | EDMA_RSP_Q_OUT_PTR = 0x24, /* also contains BASE_LO */ | |
31961943 BR |
399 | EDMA_RSP_Q_PTR_SHIFT = 3, |
400 | ||
cae5a29d | 401 | EDMA_CMD = 0x28, /* EDMA command register */ |
0ea9e179 JG |
402 | EDMA_EN = (1 << 0), /* enable EDMA */ |
403 | EDMA_DS = (1 << 1), /* disable EDMA; self-negated */ | |
8e7decdb ML |
404 | EDMA_RESET = (1 << 2), /* reset eng/trans/link/phy */ |
405 | ||
cae5a29d | 406 | EDMA_STATUS = 0x30, /* EDMA engine status */ |
8e7decdb ML |
407 | EDMA_STATUS_CACHE_EMPTY = (1 << 6), /* GenIIe command cache empty */ |
408 | EDMA_STATUS_IDLE = (1 << 7), /* GenIIe EDMA enabled/idle */ | |
20f733e7 | 409 | |
cae5a29d ML |
410 | EDMA_IORDY_TMOUT = 0x34, |
411 | EDMA_ARB_CFG = 0x38, | |
8e7decdb | 412 | |
cae5a29d ML |
413 | EDMA_HALTCOND = 0x60, /* GenIIe halt conditions */ |
414 | EDMA_UNKNOWN_RSVD = 0x6C, /* GenIIe unknown/reserved */ | |
da14265e | 415 | |
cae5a29d ML |
416 | BMDMA_CMD = 0x224, /* bmdma command register */ |
417 | BMDMA_STATUS = 0x228, /* bmdma status register */ | |
418 | BMDMA_PRD_LOW = 0x22c, /* bmdma PRD addr 31:0 */ | |
419 | BMDMA_PRD_HIGH = 0x230, /* bmdma PRD addr 63:32 */ | |
da14265e | 420 | |
31961943 BR |
421 | /* Host private flags (hp_flags) */ |
422 | MV_HP_FLAG_MSI = (1 << 0), | |
47c2b677 JG |
423 | MV_HP_ERRATA_50XXB0 = (1 << 1), |
424 | MV_HP_ERRATA_50XXB2 = (1 << 2), | |
425 | MV_HP_ERRATA_60X1B2 = (1 << 3), | |
426 | MV_HP_ERRATA_60X1C0 = (1 << 4), | |
0ea9e179 JG |
427 | MV_HP_GEN_I = (1 << 6), /* Generation I: 50xx */ |
428 | MV_HP_GEN_II = (1 << 7), /* Generation II: 60xx */ | |
429 | MV_HP_GEN_IIE = (1 << 8), /* Generation IIE: 6042/7042 */ | |
02a121da | 430 | MV_HP_PCIE = (1 << 9), /* PCIe bus/regs: 7042 */ |
616d4a98 | 431 | MV_HP_CUT_THROUGH = (1 << 10), /* can use EDMA cut-through */ |
1f398472 | 432 | MV_HP_FLAG_SOC = (1 << 11), /* SystemOnChip, no PCI */ |
000b344f | 433 | MV_HP_QUIRK_LED_BLINK_EN = (1 << 12), /* is led blinking enabled? */ |
20f733e7 | 434 | |
31961943 | 435 | /* Port private flags (pp_flags) */ |
0ea9e179 | 436 | MV_PP_FLAG_EDMA_EN = (1 << 0), /* is EDMA engine enabled? */ |
72109168 | 437 | MV_PP_FLAG_NCQ_EN = (1 << 1), /* is EDMA set up for NCQ? */ |
00f42eab | 438 | MV_PP_FLAG_FBS_EN = (1 << 2), /* is EDMA set up for FBS? */ |
29d187bb | 439 | MV_PP_FLAG_DELAYED_EH = (1 << 3), /* delayed dev err handling */ |
d16ab3f6 | 440 | MV_PP_FLAG_FAKE_ATA_BUSY = (1 << 4), /* ignore initial ATA_DRDY */ |
20f733e7 BR |
441 | }; |
442 | ||
ee9ccdf7 JG |
443 | #define IS_GEN_I(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_I) |
444 | #define IS_GEN_II(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_II) | |
e4e7b892 | 445 | #define IS_GEN_IIE(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_IIE) |
8e7decdb | 446 | #define IS_PCIE(hpriv) ((hpriv)->hp_flags & MV_HP_PCIE) |
1f398472 | 447 | #define IS_SOC(hpriv) ((hpriv)->hp_flags & MV_HP_FLAG_SOC) |
bca1c4eb | 448 | |
15a32632 LB |
449 | #define WINDOW_CTRL(i) (0x20030 + ((i) << 4)) |
450 | #define WINDOW_BASE(i) (0x20034 + ((i) << 4)) | |
451 | ||
095fec88 | 452 | enum { |
baf14aa1 JG |
453 | /* DMA boundary 0xffff is required by the s/g splitting |
454 | * we need on /length/ in mv_fill-sg(). | |
455 | */ | |
456 | MV_DMA_BOUNDARY = 0xffffU, | |
095fec88 | 457 | |
0ea9e179 JG |
458 | /* mask of register bits containing lower 32 bits |
459 | * of EDMA request queue DMA address | |
460 | */ | |
095fec88 JG |
461 | EDMA_REQ_Q_BASE_LO_MASK = 0xfffffc00U, |
462 | ||
0ea9e179 | 463 | /* ditto, for response queue */ |
095fec88 JG |
464 | EDMA_RSP_Q_BASE_LO_MASK = 0xffffff00U, |
465 | }; | |
466 | ||
522479fb JG |
467 | enum chip_type { |
468 | chip_504x, | |
469 | chip_508x, | |
470 | chip_5080, | |
471 | chip_604x, | |
472 | chip_608x, | |
e4e7b892 JG |
473 | chip_6042, |
474 | chip_7042, | |
f351b2d6 | 475 | chip_soc, |
522479fb JG |
476 | }; |
477 | ||
31961943 BR |
478 | /* Command ReQuest Block: 32B */ |
479 | struct mv_crqb { | |
e1469874 ML |
480 | __le32 sg_addr; |
481 | __le32 sg_addr_hi; | |
482 | __le16 ctrl_flags; | |
483 | __le16 ata_cmd[11]; | |
31961943 | 484 | }; |
20f733e7 | 485 | |
e4e7b892 | 486 | struct mv_crqb_iie { |
e1469874 ML |
487 | __le32 addr; |
488 | __le32 addr_hi; | |
489 | __le32 flags; | |
490 | __le32 len; | |
491 | __le32 ata_cmd[4]; | |
e4e7b892 JG |
492 | }; |
493 | ||
31961943 BR |
494 | /* Command ResPonse Block: 8B */ |
495 | struct mv_crpb { | |
e1469874 ML |
496 | __le16 id; |
497 | __le16 flags; | |
498 | __le32 tmstmp; | |
20f733e7 BR |
499 | }; |
500 | ||
31961943 BR |
501 | /* EDMA Physical Region Descriptor (ePRD); A.K.A. SG */ |
502 | struct mv_sg { | |
e1469874 ML |
503 | __le32 addr; |
504 | __le32 flags_size; | |
505 | __le32 addr_hi; | |
506 | __le32 reserved; | |
31961943 | 507 | }; |
20f733e7 | 508 | |
08da1759 ML |
509 | /* |
510 | * We keep a local cache of a few frequently accessed port | |
511 | * registers here, to avoid having to read them (very slow) | |
512 | * when switching between EDMA and non-EDMA modes. | |
513 | */ | |
514 | struct mv_cached_regs { | |
515 | u32 fiscfg; | |
516 | u32 ltmode; | |
517 | u32 haltcond; | |
c01e8a23 | 518 | u32 unknown_rsvd; |
08da1759 ML |
519 | }; |
520 | ||
31961943 BR |
521 | struct mv_port_priv { |
522 | struct mv_crqb *crqb; | |
523 | dma_addr_t crqb_dma; | |
524 | struct mv_crpb *crpb; | |
525 | dma_addr_t crpb_dma; | |
eb73d558 ML |
526 | struct mv_sg *sg_tbl[MV_MAX_Q_DEPTH]; |
527 | dma_addr_t sg_tbl_dma[MV_MAX_Q_DEPTH]; | |
bdd4ddde JG |
528 | |
529 | unsigned int req_idx; | |
530 | unsigned int resp_idx; | |
531 | ||
31961943 | 532 | u32 pp_flags; |
08da1759 | 533 | struct mv_cached_regs cached; |
29d187bb | 534 | unsigned int delayed_eh_pmp_map; |
31961943 BR |
535 | }; |
536 | ||
bca1c4eb JG |
537 | struct mv_port_signal { |
538 | u32 amps; | |
539 | u32 pre; | |
540 | }; | |
541 | ||
02a121da ML |
542 | struct mv_host_priv { |
543 | u32 hp_flags; | |
1bfeff03 | 544 | unsigned int board_idx; |
96e2c487 | 545 | u32 main_irq_mask; |
02a121da ML |
546 | struct mv_port_signal signal[8]; |
547 | const struct mv_hw_ops *ops; | |
f351b2d6 SB |
548 | int n_ports; |
549 | void __iomem *base; | |
7368f919 ML |
550 | void __iomem *main_irq_cause_addr; |
551 | void __iomem *main_irq_mask_addr; | |
cae5a29d ML |
552 | u32 irq_cause_offset; |
553 | u32 irq_mask_offset; | |
02a121da | 554 | u32 unmask_all_irqs; |
c77a2f4e SB |
555 | |
556 | #if defined(CONFIG_HAVE_CLK) | |
557 | struct clk *clk; | |
eee98990 | 558 | struct clk **port_clks; |
c77a2f4e | 559 | #endif |
da2fa9ba ML |
560 | /* |
561 | * These consistent DMA memory pools give us guaranteed | |
562 | * alignment for hardware-accessed data structures, | |
563 | * and less memory waste in accomplishing the alignment. | |
564 | */ | |
565 | struct dma_pool *crqb_pool; | |
566 | struct dma_pool *crpb_pool; | |
567 | struct dma_pool *sg_tbl_pool; | |
02a121da ML |
568 | }; |
569 | ||
47c2b677 | 570 | struct mv_hw_ops { |
2a47ce06 JG |
571 | void (*phy_errata)(struct mv_host_priv *hpriv, void __iomem *mmio, |
572 | unsigned int port); | |
47c2b677 JG |
573 | void (*enable_leds)(struct mv_host_priv *hpriv, void __iomem *mmio); |
574 | void (*read_preamp)(struct mv_host_priv *hpriv, int idx, | |
575 | void __iomem *mmio); | |
c9d39130 JG |
576 | int (*reset_hc)(struct mv_host_priv *hpriv, void __iomem *mmio, |
577 | unsigned int n_hc); | |
522479fb | 578 | void (*reset_flash)(struct mv_host_priv *hpriv, void __iomem *mmio); |
7bb3c529 | 579 | void (*reset_bus)(struct ata_host *host, void __iomem *mmio); |
47c2b677 JG |
580 | }; |
581 | ||
82ef04fb TH |
582 | static int mv_scr_read(struct ata_link *link, unsigned int sc_reg_in, u32 *val); |
583 | static int mv_scr_write(struct ata_link *link, unsigned int sc_reg_in, u32 val); | |
584 | static int mv5_scr_read(struct ata_link *link, unsigned int sc_reg_in, u32 *val); | |
585 | static int mv5_scr_write(struct ata_link *link, unsigned int sc_reg_in, u32 val); | |
31961943 BR |
586 | static int mv_port_start(struct ata_port *ap); |
587 | static void mv_port_stop(struct ata_port *ap); | |
3e4a1391 | 588 | static int mv_qc_defer(struct ata_queued_cmd *qc); |
31961943 | 589 | static void mv_qc_prep(struct ata_queued_cmd *qc); |
e4e7b892 | 590 | static void mv_qc_prep_iie(struct ata_queued_cmd *qc); |
9a3d9eb0 | 591 | static unsigned int mv_qc_issue(struct ata_queued_cmd *qc); |
a1efdaba TH |
592 | static int mv_hardreset(struct ata_link *link, unsigned int *class, |
593 | unsigned long deadline); | |
bdd4ddde JG |
594 | static void mv_eh_freeze(struct ata_port *ap); |
595 | static void mv_eh_thaw(struct ata_port *ap); | |
f273827e | 596 | static void mv6_dev_config(struct ata_device *dev); |
20f733e7 | 597 | |
2a47ce06 JG |
598 | static void mv5_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, |
599 | unsigned int port); | |
47c2b677 JG |
600 | static void mv5_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio); |
601 | static void mv5_read_preamp(struct mv_host_priv *hpriv, int idx, | |
602 | void __iomem *mmio); | |
c9d39130 JG |
603 | static int mv5_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio, |
604 | unsigned int n_hc); | |
522479fb | 605 | static void mv5_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio); |
7bb3c529 | 606 | static void mv5_reset_bus(struct ata_host *host, void __iomem *mmio); |
47c2b677 | 607 | |
2a47ce06 JG |
608 | static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, |
609 | unsigned int port); | |
47c2b677 JG |
610 | static void mv6_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio); |
611 | static void mv6_read_preamp(struct mv_host_priv *hpriv, int idx, | |
612 | void __iomem *mmio); | |
c9d39130 JG |
613 | static int mv6_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio, |
614 | unsigned int n_hc); | |
522479fb | 615 | static void mv6_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio); |
f351b2d6 SB |
616 | static void mv_soc_enable_leds(struct mv_host_priv *hpriv, |
617 | void __iomem *mmio); | |
618 | static void mv_soc_read_preamp(struct mv_host_priv *hpriv, int idx, | |
619 | void __iomem *mmio); | |
620 | static int mv_soc_reset_hc(struct mv_host_priv *hpriv, | |
621 | void __iomem *mmio, unsigned int n_hc); | |
622 | static void mv_soc_reset_flash(struct mv_host_priv *hpriv, | |
623 | void __iomem *mmio); | |
624 | static void mv_soc_reset_bus(struct ata_host *host, void __iomem *mmio); | |
29b7e43c MM |
625 | static void mv_soc_65n_phy_errata(struct mv_host_priv *hpriv, |
626 | void __iomem *mmio, unsigned int port); | |
7bb3c529 | 627 | static void mv_reset_pci_bus(struct ata_host *host, void __iomem *mmio); |
e12bef50 | 628 | static void mv_reset_channel(struct mv_host_priv *hpriv, void __iomem *mmio, |
c9d39130 | 629 | unsigned int port_no); |
e12bef50 | 630 | static int mv_stop_edma(struct ata_port *ap); |
b562468c | 631 | static int mv_stop_edma_engine(void __iomem *port_mmio); |
00b81235 | 632 | static void mv_edma_cfg(struct ata_port *ap, int want_ncq, int want_edma); |
47c2b677 | 633 | |
e49856d8 ML |
634 | static void mv_pmp_select(struct ata_port *ap, int pmp); |
635 | static int mv_pmp_hardreset(struct ata_link *link, unsigned int *class, | |
636 | unsigned long deadline); | |
637 | static int mv_softreset(struct ata_link *link, unsigned int *class, | |
638 | unsigned long deadline); | |
29d187bb | 639 | static void mv_pmp_error_handler(struct ata_port *ap); |
4c299ca3 ML |
640 | static void mv_process_crpb_entries(struct ata_port *ap, |
641 | struct mv_port_priv *pp); | |
47c2b677 | 642 | |
da14265e ML |
643 | static void mv_sff_irq_clear(struct ata_port *ap); |
644 | static int mv_check_atapi_dma(struct ata_queued_cmd *qc); | |
645 | static void mv_bmdma_setup(struct ata_queued_cmd *qc); | |
646 | static void mv_bmdma_start(struct ata_queued_cmd *qc); | |
647 | static void mv_bmdma_stop(struct ata_queued_cmd *qc); | |
648 | static u8 mv_bmdma_status(struct ata_port *ap); | |
d16ab3f6 | 649 | static u8 mv_sff_check_status(struct ata_port *ap); |
da14265e | 650 | |
eb73d558 ML |
651 | /* .sg_tablesize is (MV_MAX_SG_CT / 2) in the structures below |
652 | * because we have to allow room for worst case splitting of | |
653 | * PRDs for 64K boundaries in mv_fill_sg(). | |
654 | */ | |
13b74085 | 655 | #ifdef CONFIG_PCI |
c5d3e45a | 656 | static struct scsi_host_template mv5_sht = { |
68d1d07b | 657 | ATA_BASE_SHT(DRV_NAME), |
baf14aa1 | 658 | .sg_tablesize = MV_MAX_SG_CT / 2, |
c5d3e45a | 659 | .dma_boundary = MV_DMA_BOUNDARY, |
c5d3e45a | 660 | }; |
13b74085 | 661 | #endif |
c5d3e45a | 662 | static struct scsi_host_template mv6_sht = { |
68d1d07b | 663 | ATA_NCQ_SHT(DRV_NAME), |
138bfdd0 | 664 | .can_queue = MV_MAX_Q_DEPTH - 1, |
baf14aa1 | 665 | .sg_tablesize = MV_MAX_SG_CT / 2, |
20f733e7 | 666 | .dma_boundary = MV_DMA_BOUNDARY, |
20f733e7 BR |
667 | }; |
668 | ||
029cfd6b TH |
669 | static struct ata_port_operations mv5_ops = { |
670 | .inherits = &ata_sff_port_ops, | |
c9d39130 | 671 | |
c96f1732 AC |
672 | .lost_interrupt = ATA_OP_NULL, |
673 | ||
3e4a1391 | 674 | .qc_defer = mv_qc_defer, |
c9d39130 JG |
675 | .qc_prep = mv_qc_prep, |
676 | .qc_issue = mv_qc_issue, | |
c9d39130 | 677 | |
bdd4ddde JG |
678 | .freeze = mv_eh_freeze, |
679 | .thaw = mv_eh_thaw, | |
a1efdaba | 680 | .hardreset = mv_hardreset, |
bdd4ddde | 681 | |
c9d39130 JG |
682 | .scr_read = mv5_scr_read, |
683 | .scr_write = mv5_scr_write, | |
684 | ||
685 | .port_start = mv_port_start, | |
686 | .port_stop = mv_port_stop, | |
c9d39130 JG |
687 | }; |
688 | ||
029cfd6b | 689 | static struct ata_port_operations mv6_ops = { |
8930ff25 TH |
690 | .inherits = &ata_bmdma_port_ops, |
691 | ||
692 | .lost_interrupt = ATA_OP_NULL, | |
693 | ||
694 | .qc_defer = mv_qc_defer, | |
695 | .qc_prep = mv_qc_prep, | |
696 | .qc_issue = mv_qc_issue, | |
697 | ||
f273827e | 698 | .dev_config = mv6_dev_config, |
20f733e7 | 699 | |
8930ff25 TH |
700 | .freeze = mv_eh_freeze, |
701 | .thaw = mv_eh_thaw, | |
702 | .hardreset = mv_hardreset, | |
703 | .softreset = mv_softreset, | |
e49856d8 ML |
704 | .pmp_hardreset = mv_pmp_hardreset, |
705 | .pmp_softreset = mv_softreset, | |
29d187bb | 706 | .error_handler = mv_pmp_error_handler, |
da14265e | 707 | |
8930ff25 TH |
708 | .scr_read = mv_scr_read, |
709 | .scr_write = mv_scr_write, | |
710 | ||
40f21b11 | 711 | .sff_check_status = mv_sff_check_status, |
da14265e ML |
712 | .sff_irq_clear = mv_sff_irq_clear, |
713 | .check_atapi_dma = mv_check_atapi_dma, | |
714 | .bmdma_setup = mv_bmdma_setup, | |
715 | .bmdma_start = mv_bmdma_start, | |
716 | .bmdma_stop = mv_bmdma_stop, | |
717 | .bmdma_status = mv_bmdma_status, | |
8930ff25 TH |
718 | |
719 | .port_start = mv_port_start, | |
720 | .port_stop = mv_port_stop, | |
20f733e7 BR |
721 | }; |
722 | ||
029cfd6b TH |
723 | static struct ata_port_operations mv_iie_ops = { |
724 | .inherits = &mv6_ops, | |
725 | .dev_config = ATA_OP_NULL, | |
e4e7b892 | 726 | .qc_prep = mv_qc_prep_iie, |
e4e7b892 JG |
727 | }; |
728 | ||
98ac62de | 729 | static const struct ata_port_info mv_port_info[] = { |
20f733e7 | 730 | { /* chip_504x */ |
91b1a84c | 731 | .flags = MV_GEN_I_FLAGS, |
c361acbc | 732 | .pio_mask = ATA_PIO4, |
bf6263a8 | 733 | .udma_mask = ATA_UDMA6, |
c9d39130 | 734 | .port_ops = &mv5_ops, |
20f733e7 BR |
735 | }, |
736 | { /* chip_508x */ | |
91b1a84c | 737 | .flags = MV_GEN_I_FLAGS | MV_FLAG_DUAL_HC, |
c361acbc | 738 | .pio_mask = ATA_PIO4, |
bf6263a8 | 739 | .udma_mask = ATA_UDMA6, |
c9d39130 | 740 | .port_ops = &mv5_ops, |
20f733e7 | 741 | }, |
47c2b677 | 742 | { /* chip_5080 */ |
91b1a84c | 743 | .flags = MV_GEN_I_FLAGS | MV_FLAG_DUAL_HC, |
c361acbc | 744 | .pio_mask = ATA_PIO4, |
bf6263a8 | 745 | .udma_mask = ATA_UDMA6, |
c9d39130 | 746 | .port_ops = &mv5_ops, |
47c2b677 | 747 | }, |
20f733e7 | 748 | { /* chip_604x */ |
91b1a84c | 749 | .flags = MV_GEN_II_FLAGS, |
c361acbc | 750 | .pio_mask = ATA_PIO4, |
bf6263a8 | 751 | .udma_mask = ATA_UDMA6, |
c9d39130 | 752 | .port_ops = &mv6_ops, |
20f733e7 BR |
753 | }, |
754 | { /* chip_608x */ | |
91b1a84c | 755 | .flags = MV_GEN_II_FLAGS | MV_FLAG_DUAL_HC, |
c361acbc | 756 | .pio_mask = ATA_PIO4, |
bf6263a8 | 757 | .udma_mask = ATA_UDMA6, |
c9d39130 | 758 | .port_ops = &mv6_ops, |
20f733e7 | 759 | }, |
e4e7b892 | 760 | { /* chip_6042 */ |
91b1a84c | 761 | .flags = MV_GEN_IIE_FLAGS, |
c361acbc | 762 | .pio_mask = ATA_PIO4, |
bf6263a8 | 763 | .udma_mask = ATA_UDMA6, |
e4e7b892 JG |
764 | .port_ops = &mv_iie_ops, |
765 | }, | |
766 | { /* chip_7042 */ | |
91b1a84c | 767 | .flags = MV_GEN_IIE_FLAGS, |
c361acbc | 768 | .pio_mask = ATA_PIO4, |
bf6263a8 | 769 | .udma_mask = ATA_UDMA6, |
e4e7b892 JG |
770 | .port_ops = &mv_iie_ops, |
771 | }, | |
f351b2d6 | 772 | { /* chip_soc */ |
91b1a84c | 773 | .flags = MV_GEN_IIE_FLAGS, |
c361acbc | 774 | .pio_mask = ATA_PIO4, |
17c5aab5 ML |
775 | .udma_mask = ATA_UDMA6, |
776 | .port_ops = &mv_iie_ops, | |
f351b2d6 | 777 | }, |
20f733e7 BR |
778 | }; |
779 | ||
3b7d697d | 780 | static const struct pci_device_id mv_pci_tbl[] = { |
2d2744fc JG |
781 | { PCI_VDEVICE(MARVELL, 0x5040), chip_504x }, |
782 | { PCI_VDEVICE(MARVELL, 0x5041), chip_504x }, | |
783 | { PCI_VDEVICE(MARVELL, 0x5080), chip_5080 }, | |
784 | { PCI_VDEVICE(MARVELL, 0x5081), chip_508x }, | |
46c5784c ML |
785 | /* RocketRAID 1720/174x have different identifiers */ |
786 | { PCI_VDEVICE(TTI, 0x1720), chip_6042 }, | |
4462254a ML |
787 | { PCI_VDEVICE(TTI, 0x1740), chip_6042 }, |
788 | { PCI_VDEVICE(TTI, 0x1742), chip_6042 }, | |
2d2744fc JG |
789 | |
790 | { PCI_VDEVICE(MARVELL, 0x6040), chip_604x }, | |
791 | { PCI_VDEVICE(MARVELL, 0x6041), chip_604x }, | |
792 | { PCI_VDEVICE(MARVELL, 0x6042), chip_6042 }, | |
793 | { PCI_VDEVICE(MARVELL, 0x6080), chip_608x }, | |
794 | { PCI_VDEVICE(MARVELL, 0x6081), chip_608x }, | |
795 | ||
796 | { PCI_VDEVICE(ADAPTEC2, 0x0241), chip_604x }, | |
797 | ||
d9f9c6bc FA |
798 | /* Adaptec 1430SA */ |
799 | { PCI_VDEVICE(ADAPTEC2, 0x0243), chip_7042 }, | |
800 | ||
02a121da | 801 | /* Marvell 7042 support */ |
6a3d586d MT |
802 | { PCI_VDEVICE(MARVELL, 0x7042), chip_7042 }, |
803 | ||
02a121da ML |
804 | /* Highpoint RocketRAID PCIe series */ |
805 | { PCI_VDEVICE(TTI, 0x2300), chip_7042 }, | |
806 | { PCI_VDEVICE(TTI, 0x2310), chip_7042 }, | |
807 | ||
2d2744fc | 808 | { } /* terminate list */ |
20f733e7 BR |
809 | }; |
810 | ||
47c2b677 JG |
811 | static const struct mv_hw_ops mv5xxx_ops = { |
812 | .phy_errata = mv5_phy_errata, | |
813 | .enable_leds = mv5_enable_leds, | |
814 | .read_preamp = mv5_read_preamp, | |
815 | .reset_hc = mv5_reset_hc, | |
522479fb JG |
816 | .reset_flash = mv5_reset_flash, |
817 | .reset_bus = mv5_reset_bus, | |
47c2b677 JG |
818 | }; |
819 | ||
820 | static const struct mv_hw_ops mv6xxx_ops = { | |
821 | .phy_errata = mv6_phy_errata, | |
822 | .enable_leds = mv6_enable_leds, | |
823 | .read_preamp = mv6_read_preamp, | |
824 | .reset_hc = mv6_reset_hc, | |
522479fb JG |
825 | .reset_flash = mv6_reset_flash, |
826 | .reset_bus = mv_reset_pci_bus, | |
47c2b677 JG |
827 | }; |
828 | ||
f351b2d6 SB |
829 | static const struct mv_hw_ops mv_soc_ops = { |
830 | .phy_errata = mv6_phy_errata, | |
831 | .enable_leds = mv_soc_enable_leds, | |
832 | .read_preamp = mv_soc_read_preamp, | |
833 | .reset_hc = mv_soc_reset_hc, | |
834 | .reset_flash = mv_soc_reset_flash, | |
835 | .reset_bus = mv_soc_reset_bus, | |
836 | }; | |
837 | ||
29b7e43c MM |
838 | static const struct mv_hw_ops mv_soc_65n_ops = { |
839 | .phy_errata = mv_soc_65n_phy_errata, | |
840 | .enable_leds = mv_soc_enable_leds, | |
841 | .reset_hc = mv_soc_reset_hc, | |
842 | .reset_flash = mv_soc_reset_flash, | |
843 | .reset_bus = mv_soc_reset_bus, | |
844 | }; | |
845 | ||
20f733e7 BR |
846 | /* |
847 | * Functions | |
848 | */ | |
849 | ||
850 | static inline void writelfl(unsigned long data, void __iomem *addr) | |
851 | { | |
852 | writel(data, addr); | |
853 | (void) readl(addr); /* flush to avoid PCI posted write */ | |
854 | } | |
855 | ||
c9d39130 JG |
856 | static inline unsigned int mv_hc_from_port(unsigned int port) |
857 | { | |
858 | return port >> MV_PORT_HC_SHIFT; | |
859 | } | |
860 | ||
861 | static inline unsigned int mv_hardport_from_port(unsigned int port) | |
862 | { | |
863 | return port & MV_PORT_MASK; | |
864 | } | |
865 | ||
1cfd19ae ML |
866 | /* |
867 | * Consolidate some rather tricky bit shift calculations. | |
868 | * This is hot-path stuff, so not a function. | |
869 | * Simple code, with two return values, so macro rather than inline. | |
870 | * | |
871 | * port is the sole input, in range 0..7. | |
7368f919 ML |
872 | * shift is one output, for use with main_irq_cause / main_irq_mask registers. |
873 | * hardport is the other output, in range 0..3. | |
1cfd19ae ML |
874 | * |
875 | * Note that port and hardport may be the same variable in some cases. | |
876 | */ | |
877 | #define MV_PORT_TO_SHIFT_AND_HARDPORT(port, shift, hardport) \ | |
878 | { \ | |
879 | shift = mv_hc_from_port(port) * HC_SHIFT; \ | |
880 | hardport = mv_hardport_from_port(port); \ | |
881 | shift += hardport * 2; \ | |
882 | } | |
883 | ||
352fab70 ML |
884 | static inline void __iomem *mv_hc_base(void __iomem *base, unsigned int hc) |
885 | { | |
cae5a29d | 886 | return (base + SATAHC0_REG_BASE + (hc * MV_SATAHC_REG_SZ)); |
352fab70 ML |
887 | } |
888 | ||
c9d39130 JG |
889 | static inline void __iomem *mv_hc_base_from_port(void __iomem *base, |
890 | unsigned int port) | |
891 | { | |
892 | return mv_hc_base(base, mv_hc_from_port(port)); | |
893 | } | |
894 | ||
20f733e7 BR |
895 | static inline void __iomem *mv_port_base(void __iomem *base, unsigned int port) |
896 | { | |
c9d39130 | 897 | return mv_hc_base_from_port(base, port) + |
8b260248 | 898 | MV_SATAHC_ARBTR_REG_SZ + |
c9d39130 | 899 | (mv_hardport_from_port(port) * MV_PORT_REG_SZ); |
20f733e7 BR |
900 | } |
901 | ||
e12bef50 ML |
902 | static void __iomem *mv5_phy_base(void __iomem *mmio, unsigned int port) |
903 | { | |
904 | void __iomem *hc_mmio = mv_hc_base_from_port(mmio, port); | |
905 | unsigned long ofs = (mv_hardport_from_port(port) + 1) * 0x100UL; | |
906 | ||
907 | return hc_mmio + ofs; | |
908 | } | |
909 | ||
f351b2d6 SB |
910 | static inline void __iomem *mv_host_base(struct ata_host *host) |
911 | { | |
912 | struct mv_host_priv *hpriv = host->private_data; | |
913 | return hpriv->base; | |
914 | } | |
915 | ||
20f733e7 BR |
916 | static inline void __iomem *mv_ap_base(struct ata_port *ap) |
917 | { | |
f351b2d6 | 918 | return mv_port_base(mv_host_base(ap->host), ap->port_no); |
20f733e7 BR |
919 | } |
920 | ||
cca3974e | 921 | static inline int mv_get_hc_count(unsigned long port_flags) |
31961943 | 922 | { |
cca3974e | 923 | return ((port_flags & MV_FLAG_DUAL_HC) ? 2 : 1); |
31961943 BR |
924 | } |
925 | ||
08da1759 ML |
926 | /** |
927 | * mv_save_cached_regs - (re-)initialize cached port registers | |
928 | * @ap: the port whose registers we are caching | |
929 | * | |
930 | * Initialize the local cache of port registers, | |
931 | * so that reading them over and over again can | |
932 | * be avoided on the hotter paths of this driver. | |
933 | * This saves a few microseconds each time we switch | |
934 | * to/from EDMA mode to perform (eg.) a drive cache flush. | |
935 | */ | |
936 | static void mv_save_cached_regs(struct ata_port *ap) | |
937 | { | |
938 | void __iomem *port_mmio = mv_ap_base(ap); | |
939 | struct mv_port_priv *pp = ap->private_data; | |
940 | ||
cae5a29d ML |
941 | pp->cached.fiscfg = readl(port_mmio + FISCFG); |
942 | pp->cached.ltmode = readl(port_mmio + LTMODE); | |
943 | pp->cached.haltcond = readl(port_mmio + EDMA_HALTCOND); | |
944 | pp->cached.unknown_rsvd = readl(port_mmio + EDMA_UNKNOWN_RSVD); | |
08da1759 ML |
945 | } |
946 | ||
947 | /** | |
948 | * mv_write_cached_reg - write to a cached port register | |
949 | * @addr: hardware address of the register | |
950 | * @old: pointer to cached value of the register | |
951 | * @new: new value for the register | |
952 | * | |
953 | * Write a new value to a cached register, | |
954 | * but only if the value is different from before. | |
955 | */ | |
956 | static inline void mv_write_cached_reg(void __iomem *addr, u32 *old, u32 new) | |
957 | { | |
958 | if (new != *old) { | |
12f3b6d7 | 959 | unsigned long laddr; |
08da1759 | 960 | *old = new; |
12f3b6d7 ML |
961 | /* |
962 | * Workaround for 88SX60x1-B2 FEr SATA#13: | |
963 | * Read-after-write is needed to prevent generating 64-bit | |
964 | * write cycles on the PCI bus for SATA interface registers | |
965 | * at offsets ending in 0x4 or 0xc. | |
966 | * | |
967 | * Looks like a lot of fuss, but it avoids an unnecessary | |
968 | * +1 usec read-after-write delay for unaffected registers. | |
969 | */ | |
970 | laddr = (long)addr & 0xffff; | |
971 | if (laddr >= 0x300 && laddr <= 0x33c) { | |
972 | laddr &= 0x000f; | |
973 | if (laddr == 0x4 || laddr == 0xc) { | |
974 | writelfl(new, addr); /* read after write */ | |
975 | return; | |
976 | } | |
977 | } | |
978 | writel(new, addr); /* unaffected by the errata */ | |
08da1759 ML |
979 | } |
980 | } | |
981 | ||
c5d3e45a JG |
982 | static void mv_set_edma_ptrs(void __iomem *port_mmio, |
983 | struct mv_host_priv *hpriv, | |
984 | struct mv_port_priv *pp) | |
985 | { | |
bdd4ddde JG |
986 | u32 index; |
987 | ||
c5d3e45a JG |
988 | /* |
989 | * initialize request queue | |
990 | */ | |
fcfb1f77 ML |
991 | pp->req_idx &= MV_MAX_Q_DEPTH_MASK; /* paranoia */ |
992 | index = pp->req_idx << EDMA_REQ_Q_PTR_SHIFT; | |
bdd4ddde | 993 | |
c5d3e45a | 994 | WARN_ON(pp->crqb_dma & 0x3ff); |
cae5a29d | 995 | writel((pp->crqb_dma >> 16) >> 16, port_mmio + EDMA_REQ_Q_BASE_HI); |
bdd4ddde | 996 | writelfl((pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK) | index, |
cae5a29d ML |
997 | port_mmio + EDMA_REQ_Q_IN_PTR); |
998 | writelfl(index, port_mmio + EDMA_REQ_Q_OUT_PTR); | |
c5d3e45a JG |
999 | |
1000 | /* | |
1001 | * initialize response queue | |
1002 | */ | |
fcfb1f77 ML |
1003 | pp->resp_idx &= MV_MAX_Q_DEPTH_MASK; /* paranoia */ |
1004 | index = pp->resp_idx << EDMA_RSP_Q_PTR_SHIFT; | |
bdd4ddde | 1005 | |
c5d3e45a | 1006 | WARN_ON(pp->crpb_dma & 0xff); |
cae5a29d ML |
1007 | writel((pp->crpb_dma >> 16) >> 16, port_mmio + EDMA_RSP_Q_BASE_HI); |
1008 | writelfl(index, port_mmio + EDMA_RSP_Q_IN_PTR); | |
bdd4ddde | 1009 | writelfl((pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK) | index, |
cae5a29d | 1010 | port_mmio + EDMA_RSP_Q_OUT_PTR); |
c5d3e45a JG |
1011 | } |
1012 | ||
2b748a0a ML |
1013 | static void mv_write_main_irq_mask(u32 mask, struct mv_host_priv *hpriv) |
1014 | { | |
1015 | /* | |
1016 | * When writing to the main_irq_mask in hardware, | |
1017 | * we must ensure exclusivity between the interrupt coalescing bits | |
1018 | * and the corresponding individual port DONE_IRQ bits. | |
1019 | * | |
1020 | * Note that this register is really an "IRQ enable" register, | |
1021 | * not an "IRQ mask" register as Marvell's naming might suggest. | |
1022 | */ | |
1023 | if (mask & (ALL_PORTS_COAL_DONE | PORTS_0_3_COAL_DONE)) | |
1024 | mask &= ~DONE_IRQ_0_3; | |
1025 | if (mask & (ALL_PORTS_COAL_DONE | PORTS_4_7_COAL_DONE)) | |
1026 | mask &= ~DONE_IRQ_4_7; | |
1027 | writelfl(mask, hpriv->main_irq_mask_addr); | |
1028 | } | |
1029 | ||
c4de573b ML |
1030 | static void mv_set_main_irq_mask(struct ata_host *host, |
1031 | u32 disable_bits, u32 enable_bits) | |
1032 | { | |
1033 | struct mv_host_priv *hpriv = host->private_data; | |
1034 | u32 old_mask, new_mask; | |
1035 | ||
96e2c487 | 1036 | old_mask = hpriv->main_irq_mask; |
c4de573b | 1037 | new_mask = (old_mask & ~disable_bits) | enable_bits; |
96e2c487 ML |
1038 | if (new_mask != old_mask) { |
1039 | hpriv->main_irq_mask = new_mask; | |
2b748a0a | 1040 | mv_write_main_irq_mask(new_mask, hpriv); |
96e2c487 | 1041 | } |
c4de573b ML |
1042 | } |
1043 | ||
1044 | static void mv_enable_port_irqs(struct ata_port *ap, | |
1045 | unsigned int port_bits) | |
1046 | { | |
1047 | unsigned int shift, hardport, port = ap->port_no; | |
1048 | u32 disable_bits, enable_bits; | |
1049 | ||
1050 | MV_PORT_TO_SHIFT_AND_HARDPORT(port, shift, hardport); | |
1051 | ||
1052 | disable_bits = (DONE_IRQ | ERR_IRQ) << shift; | |
1053 | enable_bits = port_bits << shift; | |
1054 | mv_set_main_irq_mask(ap->host, disable_bits, enable_bits); | |
1055 | } | |
1056 | ||
00b81235 ML |
1057 | static void mv_clear_and_enable_port_irqs(struct ata_port *ap, |
1058 | void __iomem *port_mmio, | |
1059 | unsigned int port_irqs) | |
1060 | { | |
1061 | struct mv_host_priv *hpriv = ap->host->private_data; | |
1062 | int hardport = mv_hardport_from_port(ap->port_no); | |
1063 | void __iomem *hc_mmio = mv_hc_base_from_port( | |
1064 | mv_host_base(ap->host), ap->port_no); | |
1065 | u32 hc_irq_cause; | |
1066 | ||
1067 | /* clear EDMA event indicators, if any */ | |
cae5a29d | 1068 | writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE); |
00b81235 ML |
1069 | |
1070 | /* clear pending irq events */ | |
1071 | hc_irq_cause = ~((DEV_IRQ | DMA_IRQ) << hardport); | |
cae5a29d | 1072 | writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE); |
00b81235 ML |
1073 | |
1074 | /* clear FIS IRQ Cause */ | |
1075 | if (IS_GEN_IIE(hpriv)) | |
cae5a29d | 1076 | writelfl(0, port_mmio + FIS_IRQ_CAUSE); |
00b81235 ML |
1077 | |
1078 | mv_enable_port_irqs(ap, port_irqs); | |
1079 | } | |
1080 | ||
2b748a0a ML |
1081 | static void mv_set_irq_coalescing(struct ata_host *host, |
1082 | unsigned int count, unsigned int usecs) | |
1083 | { | |
1084 | struct mv_host_priv *hpriv = host->private_data; | |
1085 | void __iomem *mmio = hpriv->base, *hc_mmio; | |
1086 | u32 coal_enable = 0; | |
1087 | unsigned long flags; | |
6abf4678 | 1088 | unsigned int clks, is_dual_hc = hpriv->n_ports > MV_PORTS_PER_HC; |
2b748a0a ML |
1089 | const u32 coal_disable = PORTS_0_3_COAL_DONE | PORTS_4_7_COAL_DONE | |
1090 | ALL_PORTS_COAL_DONE; | |
1091 | ||
1092 | /* Disable IRQ coalescing if either threshold is zero */ | |
1093 | if (!usecs || !count) { | |
1094 | clks = count = 0; | |
1095 | } else { | |
1096 | /* Respect maximum limits of the hardware */ | |
1097 | clks = usecs * COAL_CLOCKS_PER_USEC; | |
1098 | if (clks > MAX_COAL_TIME_THRESHOLD) | |
1099 | clks = MAX_COAL_TIME_THRESHOLD; | |
1100 | if (count > MAX_COAL_IO_COUNT) | |
1101 | count = MAX_COAL_IO_COUNT; | |
1102 | } | |
1103 | ||
1104 | spin_lock_irqsave(&host->lock, flags); | |
6abf4678 | 1105 | mv_set_main_irq_mask(host, coal_disable, 0); |
2b748a0a | 1106 | |
6abf4678 | 1107 | if (is_dual_hc && !IS_GEN_I(hpriv)) { |
2b748a0a | 1108 | /* |
6abf4678 ML |
1109 | * GEN_II/GEN_IIE with dual host controllers: |
1110 | * one set of global thresholds for the entire chip. | |
2b748a0a | 1111 | */ |
cae5a29d ML |
1112 | writel(clks, mmio + IRQ_COAL_TIME_THRESHOLD); |
1113 | writel(count, mmio + IRQ_COAL_IO_THRESHOLD); | |
2b748a0a | 1114 | /* clear leftover coal IRQ bit */ |
cae5a29d | 1115 | writel(~ALL_PORTS_COAL_IRQ, mmio + IRQ_COAL_CAUSE); |
6abf4678 ML |
1116 | if (count) |
1117 | coal_enable = ALL_PORTS_COAL_DONE; | |
1118 | clks = count = 0; /* force clearing of regular regs below */ | |
2b748a0a | 1119 | } |
6abf4678 | 1120 | |
2b748a0a ML |
1121 | /* |
1122 | * All chips: independent thresholds for each HC on the chip. | |
1123 | */ | |
1124 | hc_mmio = mv_hc_base_from_port(mmio, 0); | |
cae5a29d ML |
1125 | writel(clks, hc_mmio + HC_IRQ_COAL_TIME_THRESHOLD); |
1126 | writel(count, hc_mmio + HC_IRQ_COAL_IO_THRESHOLD); | |
1127 | writel(~HC_COAL_IRQ, hc_mmio + HC_IRQ_CAUSE); | |
6abf4678 ML |
1128 | if (count) |
1129 | coal_enable |= PORTS_0_3_COAL_DONE; | |
1130 | if (is_dual_hc) { | |
2b748a0a | 1131 | hc_mmio = mv_hc_base_from_port(mmio, MV_PORTS_PER_HC); |
cae5a29d ML |
1132 | writel(clks, hc_mmio + HC_IRQ_COAL_TIME_THRESHOLD); |
1133 | writel(count, hc_mmio + HC_IRQ_COAL_IO_THRESHOLD); | |
1134 | writel(~HC_COAL_IRQ, hc_mmio + HC_IRQ_CAUSE); | |
6abf4678 ML |
1135 | if (count) |
1136 | coal_enable |= PORTS_4_7_COAL_DONE; | |
2b748a0a | 1137 | } |
2b748a0a | 1138 | |
6abf4678 | 1139 | mv_set_main_irq_mask(host, 0, coal_enable); |
2b748a0a ML |
1140 | spin_unlock_irqrestore(&host->lock, flags); |
1141 | } | |
1142 | ||
05b308e1 | 1143 | /** |
00b81235 | 1144 | * mv_start_edma - Enable eDMA engine |
05b308e1 BR |
1145 | * @base: port base address |
1146 | * @pp: port private data | |
1147 | * | |
beec7dbc TH |
1148 | * Verify the local cache of the eDMA state is accurate with a |
1149 | * WARN_ON. | |
05b308e1 BR |
1150 | * |
1151 | * LOCKING: | |
1152 | * Inherited from caller. | |
1153 | */ | |
00b81235 | 1154 | static void mv_start_edma(struct ata_port *ap, void __iomem *port_mmio, |
72109168 | 1155 | struct mv_port_priv *pp, u8 protocol) |
20f733e7 | 1156 | { |
72109168 ML |
1157 | int want_ncq = (protocol == ATA_PROT_NCQ); |
1158 | ||
1159 | if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) { | |
1160 | int using_ncq = ((pp->pp_flags & MV_PP_FLAG_NCQ_EN) != 0); | |
1161 | if (want_ncq != using_ncq) | |
b562468c | 1162 | mv_stop_edma(ap); |
72109168 | 1163 | } |
c5d3e45a | 1164 | if (!(pp->pp_flags & MV_PP_FLAG_EDMA_EN)) { |
0c58912e | 1165 | struct mv_host_priv *hpriv = ap->host->private_data; |
0c58912e | 1166 | |
00b81235 | 1167 | mv_edma_cfg(ap, want_ncq, 1); |
0c58912e | 1168 | |
f630d562 | 1169 | mv_set_edma_ptrs(port_mmio, hpriv, pp); |
00b81235 | 1170 | mv_clear_and_enable_port_irqs(ap, port_mmio, DONE_IRQ|ERR_IRQ); |
bdd4ddde | 1171 | |
cae5a29d | 1172 | writelfl(EDMA_EN, port_mmio + EDMA_CMD); |
afb0edd9 BR |
1173 | pp->pp_flags |= MV_PP_FLAG_EDMA_EN; |
1174 | } | |
20f733e7 BR |
1175 | } |
1176 | ||
9b2c4e0b ML |
1177 | static void mv_wait_for_edma_empty_idle(struct ata_port *ap) |
1178 | { | |
1179 | void __iomem *port_mmio = mv_ap_base(ap); | |
1180 | const u32 empty_idle = (EDMA_STATUS_CACHE_EMPTY | EDMA_STATUS_IDLE); | |
1181 | const int per_loop = 5, timeout = (15 * 1000 / per_loop); | |
1182 | int i; | |
1183 | ||
1184 | /* | |
1185 | * Wait for the EDMA engine to finish transactions in progress. | |
c46938cc ML |
1186 | * No idea what a good "timeout" value might be, but measurements |
1187 | * indicate that it often requires hundreds of microseconds | |
1188 | * with two drives in-use. So we use the 15msec value above | |
1189 | * as a rough guess at what even more drives might require. | |
9b2c4e0b ML |
1190 | */ |
1191 | for (i = 0; i < timeout; ++i) { | |
cae5a29d | 1192 | u32 edma_stat = readl(port_mmio + EDMA_STATUS); |
9b2c4e0b ML |
1193 | if ((edma_stat & empty_idle) == empty_idle) |
1194 | break; | |
1195 | udelay(per_loop); | |
1196 | } | |
a9a79dfe | 1197 | /* ata_port_info(ap, "%s: %u+ usecs\n", __func__, i); */ |
9b2c4e0b ML |
1198 | } |
1199 | ||
05b308e1 | 1200 | /** |
e12bef50 | 1201 | * mv_stop_edma_engine - Disable eDMA engine |
b562468c | 1202 | * @port_mmio: io base address |
05b308e1 BR |
1203 | * |
1204 | * LOCKING: | |
1205 | * Inherited from caller. | |
1206 | */ | |
b562468c | 1207 | static int mv_stop_edma_engine(void __iomem *port_mmio) |
20f733e7 | 1208 | { |
b562468c | 1209 | int i; |
31961943 | 1210 | |
b562468c | 1211 | /* Disable eDMA. The disable bit auto clears. */ |
cae5a29d | 1212 | writelfl(EDMA_DS, port_mmio + EDMA_CMD); |
8b260248 | 1213 | |
b562468c ML |
1214 | /* Wait for the chip to confirm eDMA is off. */ |
1215 | for (i = 10000; i > 0; i--) { | |
cae5a29d | 1216 | u32 reg = readl(port_mmio + EDMA_CMD); |
4537deb5 | 1217 | if (!(reg & EDMA_EN)) |
b562468c ML |
1218 | return 0; |
1219 | udelay(10); | |
31961943 | 1220 | } |
b562468c | 1221 | return -EIO; |
20f733e7 BR |
1222 | } |
1223 | ||
e12bef50 | 1224 | static int mv_stop_edma(struct ata_port *ap) |
0ea9e179 | 1225 | { |
b562468c ML |
1226 | void __iomem *port_mmio = mv_ap_base(ap); |
1227 | struct mv_port_priv *pp = ap->private_data; | |
66e57a2c | 1228 | int err = 0; |
0ea9e179 | 1229 | |
b562468c ML |
1230 | if (!(pp->pp_flags & MV_PP_FLAG_EDMA_EN)) |
1231 | return 0; | |
1232 | pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN; | |
9b2c4e0b | 1233 | mv_wait_for_edma_empty_idle(ap); |
b562468c | 1234 | if (mv_stop_edma_engine(port_mmio)) { |
a9a79dfe | 1235 | ata_port_err(ap, "Unable to stop eDMA\n"); |
66e57a2c | 1236 | err = -EIO; |
b562468c | 1237 | } |
66e57a2c ML |
1238 | mv_edma_cfg(ap, 0, 0); |
1239 | return err; | |
0ea9e179 JG |
1240 | } |
1241 | ||
8a70f8dc | 1242 | #ifdef ATA_DEBUG |
31961943 | 1243 | static void mv_dump_mem(void __iomem *start, unsigned bytes) |
20f733e7 | 1244 | { |
31961943 BR |
1245 | int b, w; |
1246 | for (b = 0; b < bytes; ) { | |
1247 | DPRINTK("%p: ", start + b); | |
1248 | for (w = 0; b < bytes && w < 4; w++) { | |
2dcb407e | 1249 | printk("%08x ", readl(start + b)); |
31961943 BR |
1250 | b += sizeof(u32); |
1251 | } | |
1252 | printk("\n"); | |
1253 | } | |
31961943 | 1254 | } |
8a70f8dc | 1255 | #endif |
13b74085 | 1256 | #if defined(ATA_DEBUG) || defined(CONFIG_PCI) |
31961943 BR |
1257 | static void mv_dump_pci_cfg(struct pci_dev *pdev, unsigned bytes) |
1258 | { | |
1259 | #ifdef ATA_DEBUG | |
1260 | int b, w; | |
1261 | u32 dw; | |
1262 | for (b = 0; b < bytes; ) { | |
1263 | DPRINTK("%02x: ", b); | |
1264 | for (w = 0; b < bytes && w < 4; w++) { | |
2dcb407e JG |
1265 | (void) pci_read_config_dword(pdev, b, &dw); |
1266 | printk("%08x ", dw); | |
31961943 BR |
1267 | b += sizeof(u32); |
1268 | } | |
1269 | printk("\n"); | |
1270 | } | |
1271 | #endif | |
1272 | } | |
13b74085 | 1273 | #endif |
31961943 BR |
1274 | static void mv_dump_all_regs(void __iomem *mmio_base, int port, |
1275 | struct pci_dev *pdev) | |
1276 | { | |
1277 | #ifdef ATA_DEBUG | |
8b260248 | 1278 | void __iomem *hc_base = mv_hc_base(mmio_base, |
31961943 BR |
1279 | port >> MV_PORT_HC_SHIFT); |
1280 | void __iomem *port_base; | |
1281 | int start_port, num_ports, p, start_hc, num_hcs, hc; | |
1282 | ||
1283 | if (0 > port) { | |
1284 | start_hc = start_port = 0; | |
1285 | num_ports = 8; /* shld be benign for 4 port devs */ | |
1286 | num_hcs = 2; | |
1287 | } else { | |
1288 | start_hc = port >> MV_PORT_HC_SHIFT; | |
1289 | start_port = port; | |
1290 | num_ports = num_hcs = 1; | |
1291 | } | |
8b260248 | 1292 | DPRINTK("All registers for port(s) %u-%u:\n", start_port, |
31961943 BR |
1293 | num_ports > 1 ? num_ports - 1 : start_port); |
1294 | ||
1295 | if (NULL != pdev) { | |
1296 | DPRINTK("PCI config space regs:\n"); | |
1297 | mv_dump_pci_cfg(pdev, 0x68); | |
1298 | } | |
1299 | DPRINTK("PCI regs:\n"); | |
1300 | mv_dump_mem(mmio_base+0xc00, 0x3c); | |
1301 | mv_dump_mem(mmio_base+0xd00, 0x34); | |
1302 | mv_dump_mem(mmio_base+0xf00, 0x4); | |
1303 | mv_dump_mem(mmio_base+0x1d00, 0x6c); | |
1304 | for (hc = start_hc; hc < start_hc + num_hcs; hc++) { | |
d220c37e | 1305 | hc_base = mv_hc_base(mmio_base, hc); |
31961943 BR |
1306 | DPRINTK("HC regs (HC %i):\n", hc); |
1307 | mv_dump_mem(hc_base, 0x1c); | |
1308 | } | |
1309 | for (p = start_port; p < start_port + num_ports; p++) { | |
1310 | port_base = mv_port_base(mmio_base, p); | |
2dcb407e | 1311 | DPRINTK("EDMA regs (port %i):\n", p); |
31961943 | 1312 | mv_dump_mem(port_base, 0x54); |
2dcb407e | 1313 | DPRINTK("SATA regs (port %i):\n", p); |
31961943 BR |
1314 | mv_dump_mem(port_base+0x300, 0x60); |
1315 | } | |
1316 | #endif | |
20f733e7 BR |
1317 | } |
1318 | ||
1319 | static unsigned int mv_scr_offset(unsigned int sc_reg_in) | |
1320 | { | |
1321 | unsigned int ofs; | |
1322 | ||
1323 | switch (sc_reg_in) { | |
1324 | case SCR_STATUS: | |
1325 | case SCR_CONTROL: | |
1326 | case SCR_ERROR: | |
cae5a29d | 1327 | ofs = SATA_STATUS + (sc_reg_in * sizeof(u32)); |
20f733e7 BR |
1328 | break; |
1329 | case SCR_ACTIVE: | |
cae5a29d | 1330 | ofs = SATA_ACTIVE; /* active is not with the others */ |
20f733e7 BR |
1331 | break; |
1332 | default: | |
1333 | ofs = 0xffffffffU; | |
1334 | break; | |
1335 | } | |
1336 | return ofs; | |
1337 | } | |
1338 | ||
82ef04fb | 1339 | static int mv_scr_read(struct ata_link *link, unsigned int sc_reg_in, u32 *val) |
20f733e7 BR |
1340 | { |
1341 | unsigned int ofs = mv_scr_offset(sc_reg_in); | |
1342 | ||
da3dbb17 | 1343 | if (ofs != 0xffffffffU) { |
82ef04fb | 1344 | *val = readl(mv_ap_base(link->ap) + ofs); |
da3dbb17 TH |
1345 | return 0; |
1346 | } else | |
1347 | return -EINVAL; | |
20f733e7 BR |
1348 | } |
1349 | ||
82ef04fb | 1350 | static int mv_scr_write(struct ata_link *link, unsigned int sc_reg_in, u32 val) |
20f733e7 BR |
1351 | { |
1352 | unsigned int ofs = mv_scr_offset(sc_reg_in); | |
1353 | ||
da3dbb17 | 1354 | if (ofs != 0xffffffffU) { |
20091773 ML |
1355 | void __iomem *addr = mv_ap_base(link->ap) + ofs; |
1356 | if (sc_reg_in == SCR_CONTROL) { | |
1357 | /* | |
1358 | * Workaround for 88SX60x1 FEr SATA#26: | |
1359 | * | |
25985edc | 1360 | * COMRESETs have to take care not to accidentally |
20091773 ML |
1361 | * put the drive to sleep when writing SCR_CONTROL. |
1362 | * Setting bits 12..15 prevents this problem. | |
1363 | * | |
1364 | * So if we see an outbound COMMRESET, set those bits. | |
1365 | * Ditto for the followup write that clears the reset. | |
1366 | * | |
1367 | * The proprietary driver does this for | |
1368 | * all chip versions, and so do we. | |
1369 | */ | |
1370 | if ((val & 0xf) == 1 || (readl(addr) & 0xf) == 1) | |
1371 | val |= 0xf000; | |
1372 | } | |
1373 | writelfl(val, addr); | |
da3dbb17 TH |
1374 | return 0; |
1375 | } else | |
1376 | return -EINVAL; | |
20f733e7 BR |
1377 | } |
1378 | ||
f273827e ML |
1379 | static void mv6_dev_config(struct ata_device *adev) |
1380 | { | |
1381 | /* | |
e49856d8 ML |
1382 | * Deal with Gen-II ("mv6") hardware quirks/restrictions: |
1383 | * | |
1384 | * Gen-II does not support NCQ over a port multiplier | |
1385 | * (no FIS-based switching). | |
f273827e | 1386 | */ |
e49856d8 | 1387 | if (adev->flags & ATA_DFLAG_NCQ) { |
352fab70 | 1388 | if (sata_pmp_attached(adev->link->ap)) { |
e49856d8 | 1389 | adev->flags &= ~ATA_DFLAG_NCQ; |
a9a79dfe | 1390 | ata_dev_info(adev, |
352fab70 | 1391 | "NCQ disabled for command-based switching\n"); |
352fab70 | 1392 | } |
e49856d8 | 1393 | } |
f273827e ML |
1394 | } |
1395 | ||
3e4a1391 ML |
1396 | static int mv_qc_defer(struct ata_queued_cmd *qc) |
1397 | { | |
1398 | struct ata_link *link = qc->dev->link; | |
1399 | struct ata_port *ap = link->ap; | |
1400 | struct mv_port_priv *pp = ap->private_data; | |
1401 | ||
29d187bb ML |
1402 | /* |
1403 | * Don't allow new commands if we're in a delayed EH state | |
1404 | * for NCQ and/or FIS-based switching. | |
1405 | */ | |
1406 | if (pp->pp_flags & MV_PP_FLAG_DELAYED_EH) | |
1407 | return ATA_DEFER_PORT; | |
159a7ff7 GG |
1408 | |
1409 | /* PIO commands need exclusive link: no other commands [DMA or PIO] | |
1410 | * can run concurrently. | |
1411 | * set excl_link when we want to send a PIO command in DMA mode | |
1412 | * or a non-NCQ command in NCQ mode. | |
1413 | * When we receive a command from that link, and there are no | |
1414 | * outstanding commands, mark a flag to clear excl_link and let | |
1415 | * the command go through. | |
1416 | */ | |
1417 | if (unlikely(ap->excl_link)) { | |
1418 | if (link == ap->excl_link) { | |
1419 | if (ap->nr_active_links) | |
1420 | return ATA_DEFER_PORT; | |
1421 | qc->flags |= ATA_QCFLAG_CLEAR_EXCL; | |
1422 | return 0; | |
1423 | } else | |
1424 | return ATA_DEFER_PORT; | |
1425 | } | |
1426 | ||
3e4a1391 ML |
1427 | /* |
1428 | * If the port is completely idle, then allow the new qc. | |
1429 | */ | |
1430 | if (ap->nr_active_links == 0) | |
1431 | return 0; | |
1432 | ||
4bdee6c5 TH |
1433 | /* |
1434 | * The port is operating in host queuing mode (EDMA) with NCQ | |
1435 | * enabled, allow multiple NCQ commands. EDMA also allows | |
1436 | * queueing multiple DMA commands but libata core currently | |
1437 | * doesn't allow it. | |
1438 | */ | |
1439 | if ((pp->pp_flags & MV_PP_FLAG_EDMA_EN) && | |
159a7ff7 GG |
1440 | (pp->pp_flags & MV_PP_FLAG_NCQ_EN)) { |
1441 | if (ata_is_ncq(qc->tf.protocol)) | |
1442 | return 0; | |
1443 | else { | |
1444 | ap->excl_link = link; | |
1445 | return ATA_DEFER_PORT; | |
1446 | } | |
1447 | } | |
4bdee6c5 | 1448 | |
3e4a1391 ML |
1449 | return ATA_DEFER_PORT; |
1450 | } | |
1451 | ||
08da1759 | 1452 | static void mv_config_fbs(struct ata_port *ap, int want_ncq, int want_fbs) |
e49856d8 | 1453 | { |
08da1759 ML |
1454 | struct mv_port_priv *pp = ap->private_data; |
1455 | void __iomem *port_mmio; | |
00f42eab | 1456 | |
08da1759 ML |
1457 | u32 fiscfg, *old_fiscfg = &pp->cached.fiscfg; |
1458 | u32 ltmode, *old_ltmode = &pp->cached.ltmode; | |
1459 | u32 haltcond, *old_haltcond = &pp->cached.haltcond; | |
00f42eab | 1460 | |
08da1759 ML |
1461 | ltmode = *old_ltmode & ~LTMODE_BIT8; |
1462 | haltcond = *old_haltcond | EDMA_ERR_DEV; | |
00f42eab ML |
1463 | |
1464 | if (want_fbs) { | |
08da1759 ML |
1465 | fiscfg = *old_fiscfg | FISCFG_SINGLE_SYNC; |
1466 | ltmode = *old_ltmode | LTMODE_BIT8; | |
4c299ca3 | 1467 | if (want_ncq) |
08da1759 | 1468 | haltcond &= ~EDMA_ERR_DEV; |
4c299ca3 | 1469 | else |
08da1759 ML |
1470 | fiscfg |= FISCFG_WAIT_DEV_ERR; |
1471 | } else { | |
1472 | fiscfg = *old_fiscfg & ~(FISCFG_SINGLE_SYNC | FISCFG_WAIT_DEV_ERR); | |
e49856d8 | 1473 | } |
00f42eab | 1474 | |
08da1759 | 1475 | port_mmio = mv_ap_base(ap); |
cae5a29d ML |
1476 | mv_write_cached_reg(port_mmio + FISCFG, old_fiscfg, fiscfg); |
1477 | mv_write_cached_reg(port_mmio + LTMODE, old_ltmode, ltmode); | |
1478 | mv_write_cached_reg(port_mmio + EDMA_HALTCOND, old_haltcond, haltcond); | |
f273827e ML |
1479 | } |
1480 | ||
dd2890f6 ML |
1481 | static void mv_60x1_errata_sata25(struct ata_port *ap, int want_ncq) |
1482 | { | |
1483 | struct mv_host_priv *hpriv = ap->host->private_data; | |
1484 | u32 old, new; | |
1485 | ||
1486 | /* workaround for 88SX60x1 FEr SATA#25 (part 1) */ | |
cae5a29d | 1487 | old = readl(hpriv->base + GPIO_PORT_CTL); |
dd2890f6 ML |
1488 | if (want_ncq) |
1489 | new = old | (1 << 22); | |
1490 | else | |
1491 | new = old & ~(1 << 22); | |
1492 | if (new != old) | |
cae5a29d | 1493 | writel(new, hpriv->base + GPIO_PORT_CTL); |
dd2890f6 ML |
1494 | } |
1495 | ||
c01e8a23 | 1496 | /** |
40f21b11 ML |
1497 | * mv_bmdma_enable - set a magic bit on GEN_IIE to allow bmdma |
1498 | * @ap: Port being initialized | |
c01e8a23 ML |
1499 | * |
1500 | * There are two DMA modes on these chips: basic DMA, and EDMA. | |
1501 | * | |
1502 | * Bit-0 of the "EDMA RESERVED" register enables/disables use | |
1503 | * of basic DMA on the GEN_IIE versions of the chips. | |
1504 | * | |
1505 | * This bit survives EDMA resets, and must be set for basic DMA | |
1506 | * to function, and should be cleared when EDMA is active. | |
1507 | */ | |
1508 | static void mv_bmdma_enable_iie(struct ata_port *ap, int enable_bmdma) | |
1509 | { | |
1510 | struct mv_port_priv *pp = ap->private_data; | |
1511 | u32 new, *old = &pp->cached.unknown_rsvd; | |
1512 | ||
1513 | if (enable_bmdma) | |
1514 | new = *old | 1; | |
1515 | else | |
1516 | new = *old & ~1; | |
cae5a29d | 1517 | mv_write_cached_reg(mv_ap_base(ap) + EDMA_UNKNOWN_RSVD, old, new); |
c01e8a23 ML |
1518 | } |
1519 | ||
000b344f ML |
1520 | /* |
1521 | * SOC chips have an issue whereby the HDD LEDs don't always blink | |
1522 | * during I/O when NCQ is enabled. Enabling a special "LED blink" mode | |
1523 | * of the SOC takes care of it, generating a steady blink rate when | |
1524 | * any drive on the chip is active. | |
1525 | * | |
1526 | * Unfortunately, the blink mode is a global hardware setting for the SOC, | |
1527 | * so we must use it whenever at least one port on the SOC has NCQ enabled. | |
1528 | * | |
1529 | * We turn "LED blink" off when NCQ is not in use anywhere, because the normal | |
1530 | * LED operation works then, and provides better (more accurate) feedback. | |
1531 | * | |
1532 | * Note that this code assumes that an SOC never has more than one HC onboard. | |
1533 | */ | |
1534 | static void mv_soc_led_blink_enable(struct ata_port *ap) | |
1535 | { | |
1536 | struct ata_host *host = ap->host; | |
1537 | struct mv_host_priv *hpriv = host->private_data; | |
1538 | void __iomem *hc_mmio; | |
1539 | u32 led_ctrl; | |
1540 | ||
1541 | if (hpriv->hp_flags & MV_HP_QUIRK_LED_BLINK_EN) | |
1542 | return; | |
1543 | hpriv->hp_flags |= MV_HP_QUIRK_LED_BLINK_EN; | |
1544 | hc_mmio = mv_hc_base_from_port(mv_host_base(host), ap->port_no); | |
cae5a29d ML |
1545 | led_ctrl = readl(hc_mmio + SOC_LED_CTRL); |
1546 | writel(led_ctrl | SOC_LED_CTRL_BLINK, hc_mmio + SOC_LED_CTRL); | |
000b344f ML |
1547 | } |
1548 | ||
1549 | static void mv_soc_led_blink_disable(struct ata_port *ap) | |
1550 | { | |
1551 | struct ata_host *host = ap->host; | |
1552 | struct mv_host_priv *hpriv = host->private_data; | |
1553 | void __iomem *hc_mmio; | |
1554 | u32 led_ctrl; | |
1555 | unsigned int port; | |
1556 | ||
1557 | if (!(hpriv->hp_flags & MV_HP_QUIRK_LED_BLINK_EN)) | |
1558 | return; | |
1559 | ||
1560 | /* disable led-blink only if no ports are using NCQ */ | |
1561 | for (port = 0; port < hpriv->n_ports; port++) { | |
1562 | struct ata_port *this_ap = host->ports[port]; | |
1563 | struct mv_port_priv *pp = this_ap->private_data; | |
1564 | ||
1565 | if (pp->pp_flags & MV_PP_FLAG_NCQ_EN) | |
1566 | return; | |
1567 | } | |
1568 | ||
1569 | hpriv->hp_flags &= ~MV_HP_QUIRK_LED_BLINK_EN; | |
1570 | hc_mmio = mv_hc_base_from_port(mv_host_base(host), ap->port_no); | |
cae5a29d ML |
1571 | led_ctrl = readl(hc_mmio + SOC_LED_CTRL); |
1572 | writel(led_ctrl & ~SOC_LED_CTRL_BLINK, hc_mmio + SOC_LED_CTRL); | |
000b344f ML |
1573 | } |
1574 | ||
00b81235 | 1575 | static void mv_edma_cfg(struct ata_port *ap, int want_ncq, int want_edma) |
e4e7b892 | 1576 | { |
0c58912e | 1577 | u32 cfg; |
e12bef50 ML |
1578 | struct mv_port_priv *pp = ap->private_data; |
1579 | struct mv_host_priv *hpriv = ap->host->private_data; | |
1580 | void __iomem *port_mmio = mv_ap_base(ap); | |
e4e7b892 JG |
1581 | |
1582 | /* set up non-NCQ EDMA configuration */ | |
0c58912e | 1583 | cfg = EDMA_CFG_Q_DEPTH; /* always 0x1f for *all* chips */ |
d16ab3f6 ML |
1584 | pp->pp_flags &= |
1585 | ~(MV_PP_FLAG_FBS_EN | MV_PP_FLAG_NCQ_EN | MV_PP_FLAG_FAKE_ATA_BUSY); | |
e4e7b892 | 1586 | |
0c58912e | 1587 | if (IS_GEN_I(hpriv)) |
e4e7b892 JG |
1588 | cfg |= (1 << 8); /* enab config burst size mask */ |
1589 | ||
dd2890f6 | 1590 | else if (IS_GEN_II(hpriv)) { |
e4e7b892 | 1591 | cfg |= EDMA_CFG_RD_BRST_EXT | EDMA_CFG_WR_BUFF_LEN; |
dd2890f6 | 1592 | mv_60x1_errata_sata25(ap, want_ncq); |
e4e7b892 | 1593 | |
dd2890f6 | 1594 | } else if (IS_GEN_IIE(hpriv)) { |
00f42eab ML |
1595 | int want_fbs = sata_pmp_attached(ap); |
1596 | /* | |
1597 | * Possible future enhancement: | |
1598 | * | |
1599 | * The chip can use FBS with non-NCQ, if we allow it, | |
1600 | * But first we need to have the error handling in place | |
1601 | * for this mode (datasheet section 7.3.15.4.2.3). | |
1602 | * So disallow non-NCQ FBS for now. | |
1603 | */ | |
1604 | want_fbs &= want_ncq; | |
1605 | ||
08da1759 | 1606 | mv_config_fbs(ap, want_ncq, want_fbs); |
00f42eab ML |
1607 | |
1608 | if (want_fbs) { | |
1609 | pp->pp_flags |= MV_PP_FLAG_FBS_EN; | |
1610 | cfg |= EDMA_CFG_EDMA_FBS; /* FIS-based switching */ | |
1611 | } | |
1612 | ||
e728eabe | 1613 | cfg |= (1 << 23); /* do not mask PM field in rx'd FIS */ |
00b81235 ML |
1614 | if (want_edma) { |
1615 | cfg |= (1 << 22); /* enab 4-entry host queue cache */ | |
1616 | if (!IS_SOC(hpriv)) | |
1617 | cfg |= (1 << 18); /* enab early completion */ | |
1618 | } | |
616d4a98 ML |
1619 | if (hpriv->hp_flags & MV_HP_CUT_THROUGH) |
1620 | cfg |= (1 << 17); /* enab cut-thru (dis stor&forwrd) */ | |
c01e8a23 | 1621 | mv_bmdma_enable_iie(ap, !want_edma); |
000b344f ML |
1622 | |
1623 | if (IS_SOC(hpriv)) { | |
1624 | if (want_ncq) | |
1625 | mv_soc_led_blink_enable(ap); | |
1626 | else | |
1627 | mv_soc_led_blink_disable(ap); | |
1628 | } | |
e4e7b892 JG |
1629 | } |
1630 | ||
72109168 ML |
1631 | if (want_ncq) { |
1632 | cfg |= EDMA_CFG_NCQ; | |
1633 | pp->pp_flags |= MV_PP_FLAG_NCQ_EN; | |
00b81235 | 1634 | } |
72109168 | 1635 | |
cae5a29d | 1636 | writelfl(cfg, port_mmio + EDMA_CFG); |
e4e7b892 JG |
1637 | } |
1638 | ||
da2fa9ba ML |
1639 | static void mv_port_free_dma_mem(struct ata_port *ap) |
1640 | { | |
1641 | struct mv_host_priv *hpriv = ap->host->private_data; | |
1642 | struct mv_port_priv *pp = ap->private_data; | |
eb73d558 | 1643 | int tag; |
da2fa9ba ML |
1644 | |
1645 | if (pp->crqb) { | |
1646 | dma_pool_free(hpriv->crqb_pool, pp->crqb, pp->crqb_dma); | |
1647 | pp->crqb = NULL; | |
1648 | } | |
1649 | if (pp->crpb) { | |
1650 | dma_pool_free(hpriv->crpb_pool, pp->crpb, pp->crpb_dma); | |
1651 | pp->crpb = NULL; | |
1652 | } | |
eb73d558 ML |
1653 | /* |
1654 | * For GEN_I, there's no NCQ, so we have only a single sg_tbl. | |
1655 | * For later hardware, we have one unique sg_tbl per NCQ tag. | |
1656 | */ | |
1657 | for (tag = 0; tag < MV_MAX_Q_DEPTH; ++tag) { | |
1658 | if (pp->sg_tbl[tag]) { | |
1659 | if (tag == 0 || !IS_GEN_I(hpriv)) | |
1660 | dma_pool_free(hpriv->sg_tbl_pool, | |
1661 | pp->sg_tbl[tag], | |
1662 | pp->sg_tbl_dma[tag]); | |
1663 | pp->sg_tbl[tag] = NULL; | |
1664 | } | |
da2fa9ba ML |
1665 | } |
1666 | } | |
1667 | ||
05b308e1 BR |
1668 | /** |
1669 | * mv_port_start - Port specific init/start routine. | |
1670 | * @ap: ATA channel to manipulate | |
1671 | * | |
1672 | * Allocate and point to DMA memory, init port private memory, | |
1673 | * zero indices. | |
1674 | * | |
1675 | * LOCKING: | |
1676 | * Inherited from caller. | |
1677 | */ | |
31961943 BR |
1678 | static int mv_port_start(struct ata_port *ap) |
1679 | { | |
cca3974e JG |
1680 | struct device *dev = ap->host->dev; |
1681 | struct mv_host_priv *hpriv = ap->host->private_data; | |
31961943 | 1682 | struct mv_port_priv *pp; |
933cb8e5 | 1683 | unsigned long flags; |
dde20207 | 1684 | int tag; |
31961943 | 1685 | |
24dc5f33 | 1686 | pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL); |
6037d6bb | 1687 | if (!pp) |
24dc5f33 | 1688 | return -ENOMEM; |
da2fa9ba | 1689 | ap->private_data = pp; |
31961943 | 1690 | |
da2fa9ba ML |
1691 | pp->crqb = dma_pool_alloc(hpriv->crqb_pool, GFP_KERNEL, &pp->crqb_dma); |
1692 | if (!pp->crqb) | |
1693 | return -ENOMEM; | |
1694 | memset(pp->crqb, 0, MV_CRQB_Q_SZ); | |
31961943 | 1695 | |
da2fa9ba ML |
1696 | pp->crpb = dma_pool_alloc(hpriv->crpb_pool, GFP_KERNEL, &pp->crpb_dma); |
1697 | if (!pp->crpb) | |
1698 | goto out_port_free_dma_mem; | |
1699 | memset(pp->crpb, 0, MV_CRPB_Q_SZ); | |
31961943 | 1700 | |
3bd0a70e ML |
1701 | /* 6041/6081 Rev. "C0" (and newer) are okay with async notify */ |
1702 | if (hpriv->hp_flags & MV_HP_ERRATA_60X1C0) | |
1703 | ap->flags |= ATA_FLAG_AN; | |
eb73d558 ML |
1704 | /* |
1705 | * For GEN_I, there's no NCQ, so we only allocate a single sg_tbl. | |
1706 | * For later hardware, we need one unique sg_tbl per NCQ tag. | |
1707 | */ | |
1708 | for (tag = 0; tag < MV_MAX_Q_DEPTH; ++tag) { | |
1709 | if (tag == 0 || !IS_GEN_I(hpriv)) { | |
1710 | pp->sg_tbl[tag] = dma_pool_alloc(hpriv->sg_tbl_pool, | |
1711 | GFP_KERNEL, &pp->sg_tbl_dma[tag]); | |
1712 | if (!pp->sg_tbl[tag]) | |
1713 | goto out_port_free_dma_mem; | |
1714 | } else { | |
1715 | pp->sg_tbl[tag] = pp->sg_tbl[0]; | |
1716 | pp->sg_tbl_dma[tag] = pp->sg_tbl_dma[0]; | |
1717 | } | |
1718 | } | |
933cb8e5 ML |
1719 | |
1720 | spin_lock_irqsave(ap->lock, flags); | |
08da1759 | 1721 | mv_save_cached_regs(ap); |
66e57a2c | 1722 | mv_edma_cfg(ap, 0, 0); |
933cb8e5 ML |
1723 | spin_unlock_irqrestore(ap->lock, flags); |
1724 | ||
31961943 | 1725 | return 0; |
da2fa9ba ML |
1726 | |
1727 | out_port_free_dma_mem: | |
1728 | mv_port_free_dma_mem(ap); | |
1729 | return -ENOMEM; | |
31961943 BR |
1730 | } |
1731 | ||
05b308e1 BR |
1732 | /** |
1733 | * mv_port_stop - Port specific cleanup/stop routine. | |
1734 | * @ap: ATA channel to manipulate | |
1735 | * | |
1736 | * Stop DMA, cleanup port memory. | |
1737 | * | |
1738 | * LOCKING: | |
cca3974e | 1739 | * This routine uses the host lock to protect the DMA stop. |
05b308e1 | 1740 | */ |
31961943 BR |
1741 | static void mv_port_stop(struct ata_port *ap) |
1742 | { | |
933cb8e5 ML |
1743 | unsigned long flags; |
1744 | ||
1745 | spin_lock_irqsave(ap->lock, flags); | |
e12bef50 | 1746 | mv_stop_edma(ap); |
88e675e1 | 1747 | mv_enable_port_irqs(ap, 0); |
933cb8e5 | 1748 | spin_unlock_irqrestore(ap->lock, flags); |
da2fa9ba | 1749 | mv_port_free_dma_mem(ap); |
31961943 BR |
1750 | } |
1751 | ||
05b308e1 BR |
1752 | /** |
1753 | * mv_fill_sg - Fill out the Marvell ePRD (scatter gather) entries | |
1754 | * @qc: queued command whose SG list to source from | |
1755 | * | |
1756 | * Populate the SG list and mark the last entry. | |
1757 | * | |
1758 | * LOCKING: | |
1759 | * Inherited from caller. | |
1760 | */ | |
6c08772e | 1761 | static void mv_fill_sg(struct ata_queued_cmd *qc) |
31961943 BR |
1762 | { |
1763 | struct mv_port_priv *pp = qc->ap->private_data; | |
972c26bd | 1764 | struct scatterlist *sg; |
3be6cbd7 | 1765 | struct mv_sg *mv_sg, *last_sg = NULL; |
ff2aeb1e | 1766 | unsigned int si; |
31961943 | 1767 | |
eb73d558 | 1768 | mv_sg = pp->sg_tbl[qc->tag]; |
ff2aeb1e | 1769 | for_each_sg(qc->sg, sg, qc->n_elem, si) { |
d88184fb JG |
1770 | dma_addr_t addr = sg_dma_address(sg); |
1771 | u32 sg_len = sg_dma_len(sg); | |
22374677 | 1772 | |
4007b493 OJ |
1773 | while (sg_len) { |
1774 | u32 offset = addr & 0xffff; | |
1775 | u32 len = sg_len; | |
22374677 | 1776 | |
32cd11a6 | 1777 | if (offset + len > 0x10000) |
4007b493 OJ |
1778 | len = 0x10000 - offset; |
1779 | ||
1780 | mv_sg->addr = cpu_to_le32(addr & 0xffffffff); | |
1781 | mv_sg->addr_hi = cpu_to_le32((addr >> 16) >> 16); | |
6c08772e | 1782 | mv_sg->flags_size = cpu_to_le32(len & 0xffff); |
32cd11a6 | 1783 | mv_sg->reserved = 0; |
4007b493 OJ |
1784 | |
1785 | sg_len -= len; | |
1786 | addr += len; | |
1787 | ||
3be6cbd7 | 1788 | last_sg = mv_sg; |
4007b493 | 1789 | mv_sg++; |
4007b493 | 1790 | } |
31961943 | 1791 | } |
3be6cbd7 JG |
1792 | |
1793 | if (likely(last_sg)) | |
1794 | last_sg->flags_size |= cpu_to_le32(EPRD_FLAG_END_OF_TBL); | |
32cd11a6 | 1795 | mb(); /* ensure data structure is visible to the chipset */ |
31961943 BR |
1796 | } |
1797 | ||
5796d1c4 | 1798 | static void mv_crqb_pack_cmd(__le16 *cmdw, u8 data, u8 addr, unsigned last) |
31961943 | 1799 | { |
559eedad | 1800 | u16 tmp = data | (addr << CRQB_CMD_ADDR_SHIFT) | CRQB_CMD_CS | |
31961943 | 1801 | (last ? CRQB_CMD_LAST : 0); |
559eedad | 1802 | *cmdw = cpu_to_le16(tmp); |
31961943 BR |
1803 | } |
1804 | ||
da14265e ML |
1805 | /** |
1806 | * mv_sff_irq_clear - Clear hardware interrupt after DMA. | |
1807 | * @ap: Port associated with this ATA transaction. | |
1808 | * | |
1809 | * We need this only for ATAPI bmdma transactions, | |
1810 | * as otherwise we experience spurious interrupts | |
1811 | * after libata-sff handles the bmdma interrupts. | |
1812 | */ | |
1813 | static void mv_sff_irq_clear(struct ata_port *ap) | |
1814 | { | |
1815 | mv_clear_and_enable_port_irqs(ap, mv_ap_base(ap), ERR_IRQ); | |
1816 | } | |
1817 | ||
1818 | /** | |
1819 | * mv_check_atapi_dma - Filter ATAPI cmds which are unsuitable for DMA. | |
1820 | * @qc: queued command to check for chipset/DMA compatibility. | |
1821 | * | |
1822 | * The bmdma engines cannot handle speculative data sizes | |
1823 | * (bytecount under/over flow). So only allow DMA for | |
1824 | * data transfer commands with known data sizes. | |
1825 | * | |
1826 | * LOCKING: | |
1827 | * Inherited from caller. | |
1828 | */ | |
1829 | static int mv_check_atapi_dma(struct ata_queued_cmd *qc) | |
1830 | { | |
1831 | struct scsi_cmnd *scmd = qc->scsicmd; | |
1832 | ||
1833 | if (scmd) { | |
1834 | switch (scmd->cmnd[0]) { | |
1835 | case READ_6: | |
1836 | case READ_10: | |
1837 | case READ_12: | |
1838 | case WRITE_6: | |
1839 | case WRITE_10: | |
1840 | case WRITE_12: | |
1841 | case GPCMD_READ_CD: | |
1842 | case GPCMD_SEND_DVD_STRUCTURE: | |
1843 | case GPCMD_SEND_CUE_SHEET: | |
1844 | return 0; /* DMA is safe */ | |
1845 | } | |
1846 | } | |
1847 | return -EOPNOTSUPP; /* use PIO instead */ | |
1848 | } | |
1849 | ||
1850 | /** | |
1851 | * mv_bmdma_setup - Set up BMDMA transaction | |
1852 | * @qc: queued command to prepare DMA for. | |
1853 | * | |
1854 | * LOCKING: | |
1855 | * Inherited from caller. | |
1856 | */ | |
1857 | static void mv_bmdma_setup(struct ata_queued_cmd *qc) | |
1858 | { | |
1859 | struct ata_port *ap = qc->ap; | |
1860 | void __iomem *port_mmio = mv_ap_base(ap); | |
1861 | struct mv_port_priv *pp = ap->private_data; | |
1862 | ||
1863 | mv_fill_sg(qc); | |
1864 | ||
1865 | /* clear all DMA cmd bits */ | |
cae5a29d | 1866 | writel(0, port_mmio + BMDMA_CMD); |
da14265e ML |
1867 | |
1868 | /* load PRD table addr. */ | |
1869 | writel((pp->sg_tbl_dma[qc->tag] >> 16) >> 16, | |
cae5a29d | 1870 | port_mmio + BMDMA_PRD_HIGH); |
da14265e | 1871 | writelfl(pp->sg_tbl_dma[qc->tag], |
cae5a29d | 1872 | port_mmio + BMDMA_PRD_LOW); |
da14265e ML |
1873 | |
1874 | /* issue r/w command */ | |
1875 | ap->ops->sff_exec_command(ap, &qc->tf); | |
1876 | } | |
1877 | ||
1878 | /** | |
1879 | * mv_bmdma_start - Start a BMDMA transaction | |
1880 | * @qc: queued command to start DMA on. | |
1881 | * | |
1882 | * LOCKING: | |
1883 | * Inherited from caller. | |
1884 | */ | |
1885 | static void mv_bmdma_start(struct ata_queued_cmd *qc) | |
1886 | { | |
1887 | struct ata_port *ap = qc->ap; | |
1888 | void __iomem *port_mmio = mv_ap_base(ap); | |
1889 | unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); | |
1890 | u32 cmd = (rw ? 0 : ATA_DMA_WR) | ATA_DMA_START; | |
1891 | ||
1892 | /* start host DMA transaction */ | |
cae5a29d | 1893 | writelfl(cmd, port_mmio + BMDMA_CMD); |
da14265e ML |
1894 | } |
1895 | ||
1896 | /** | |
1897 | * mv_bmdma_stop - Stop BMDMA transfer | |
1898 | * @qc: queued command to stop DMA on. | |
1899 | * | |
1900 | * Clears the ATA_DMA_START flag in the bmdma control register | |
1901 | * | |
1902 | * LOCKING: | |
1903 | * Inherited from caller. | |
1904 | */ | |
44b73380 | 1905 | static void mv_bmdma_stop_ap(struct ata_port *ap) |
da14265e | 1906 | { |
da14265e ML |
1907 | void __iomem *port_mmio = mv_ap_base(ap); |
1908 | u32 cmd; | |
1909 | ||
1910 | /* clear start/stop bit */ | |
cae5a29d | 1911 | cmd = readl(port_mmio + BMDMA_CMD); |
44b73380 ML |
1912 | if (cmd & ATA_DMA_START) { |
1913 | cmd &= ~ATA_DMA_START; | |
1914 | writelfl(cmd, port_mmio + BMDMA_CMD); | |
1915 | ||
1916 | /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */ | |
1917 | ata_sff_dma_pause(ap); | |
1918 | } | |
1919 | } | |
da14265e | 1920 | |
44b73380 ML |
1921 | static void mv_bmdma_stop(struct ata_queued_cmd *qc) |
1922 | { | |
1923 | mv_bmdma_stop_ap(qc->ap); | |
da14265e ML |
1924 | } |
1925 | ||
1926 | /** | |
1927 | * mv_bmdma_status - Read BMDMA status | |
1928 | * @ap: port for which to retrieve DMA status. | |
1929 | * | |
1930 | * Read and return equivalent of the sff BMDMA status register. | |
1931 | * | |
1932 | * LOCKING: | |
1933 | * Inherited from caller. | |
1934 | */ | |
1935 | static u8 mv_bmdma_status(struct ata_port *ap) | |
1936 | { | |
1937 | void __iomem *port_mmio = mv_ap_base(ap); | |
1938 | u32 reg, status; | |
1939 | ||
1940 | /* | |
1941 | * Other bits are valid only if ATA_DMA_ACTIVE==0, | |
1942 | * and the ATA_DMA_INTR bit doesn't exist. | |
1943 | */ | |
cae5a29d | 1944 | reg = readl(port_mmio + BMDMA_STATUS); |
da14265e ML |
1945 | if (reg & ATA_DMA_ACTIVE) |
1946 | status = ATA_DMA_ACTIVE; | |
44b73380 | 1947 | else if (reg & ATA_DMA_ERR) |
da14265e | 1948 | status = (reg & ATA_DMA_ERR) | ATA_DMA_INTR; |
44b73380 ML |
1949 | else { |
1950 | /* | |
1951 | * Just because DMA_ACTIVE is 0 (DMA completed), | |
1952 | * this does _not_ mean the device is "done". | |
1953 | * So we should not yet be signalling ATA_DMA_INTR | |
1954 | * in some cases. Eg. DSM/TRIM, and perhaps others. | |
1955 | */ | |
1956 | mv_bmdma_stop_ap(ap); | |
1957 | if (ioread8(ap->ioaddr.altstatus_addr) & ATA_BUSY) | |
1958 | status = 0; | |
1959 | else | |
1960 | status = ATA_DMA_INTR; | |
1961 | } | |
da14265e ML |
1962 | return status; |
1963 | } | |
1964 | ||
299b3f8d ML |
1965 | static void mv_rw_multi_errata_sata24(struct ata_queued_cmd *qc) |
1966 | { | |
1967 | struct ata_taskfile *tf = &qc->tf; | |
1968 | /* | |
1969 | * Workaround for 88SX60x1 FEr SATA#24. | |
1970 | * | |
1971 | * Chip may corrupt WRITEs if multi_count >= 4kB. | |
1972 | * Note that READs are unaffected. | |
1973 | * | |
1974 | * It's not clear if this errata really means "4K bytes", | |
1975 | * or if it always happens for multi_count > 7 | |
1976 | * regardless of device sector_size. | |
1977 | * | |
1978 | * So, for safety, any write with multi_count > 7 | |
1979 | * gets converted here into a regular PIO write instead: | |
1980 | */ | |
1981 | if ((tf->flags & ATA_TFLAG_WRITE) && is_multi_taskfile(tf)) { | |
1982 | if (qc->dev->multi_count > 7) { | |
1983 | switch (tf->command) { | |
1984 | case ATA_CMD_WRITE_MULTI: | |
1985 | tf->command = ATA_CMD_PIO_WRITE; | |
1986 | break; | |
1987 | case ATA_CMD_WRITE_MULTI_FUA_EXT: | |
1988 | tf->flags &= ~ATA_TFLAG_FUA; /* ugh */ | |
1989 | /* fall through */ | |
1990 | case ATA_CMD_WRITE_MULTI_EXT: | |
1991 | tf->command = ATA_CMD_PIO_WRITE_EXT; | |
1992 | break; | |
1993 | } | |
1994 | } | |
1995 | } | |
1996 | } | |
1997 | ||
05b308e1 BR |
1998 | /** |
1999 | * mv_qc_prep - Host specific command preparation. | |
2000 | * @qc: queued command to prepare | |
2001 | * | |
2002 | * This routine simply redirects to the general purpose routine | |
2003 | * if command is not DMA. Else, it handles prep of the CRQB | |
2004 | * (command request block), does some sanity checking, and calls | |
2005 | * the SG load routine. | |
2006 | * | |
2007 | * LOCKING: | |
2008 | * Inherited from caller. | |
2009 | */ | |
31961943 BR |
2010 | static void mv_qc_prep(struct ata_queued_cmd *qc) |
2011 | { | |
2012 | struct ata_port *ap = qc->ap; | |
2013 | struct mv_port_priv *pp = ap->private_data; | |
e1469874 | 2014 | __le16 *cw; |
8d2b450d | 2015 | struct ata_taskfile *tf = &qc->tf; |
31961943 | 2016 | u16 flags = 0; |
a6432436 | 2017 | unsigned in_index; |
31961943 | 2018 | |
299b3f8d ML |
2019 | switch (tf->protocol) { |
2020 | case ATA_PROT_DMA: | |
44b73380 ML |
2021 | if (tf->command == ATA_CMD_DSM) |
2022 | return; | |
2023 | /* fall-thru */ | |
299b3f8d ML |
2024 | case ATA_PROT_NCQ: |
2025 | break; /* continue below */ | |
2026 | case ATA_PROT_PIO: | |
2027 | mv_rw_multi_errata_sata24(qc); | |
31961943 | 2028 | return; |
299b3f8d ML |
2029 | default: |
2030 | return; | |
2031 | } | |
20f733e7 | 2032 | |
31961943 BR |
2033 | /* Fill in command request block |
2034 | */ | |
8d2b450d | 2035 | if (!(tf->flags & ATA_TFLAG_WRITE)) |
31961943 | 2036 | flags |= CRQB_FLAG_READ; |
beec7dbc | 2037 | WARN_ON(MV_MAX_Q_DEPTH <= qc->tag); |
31961943 | 2038 | flags |= qc->tag << CRQB_TAG_SHIFT; |
e49856d8 | 2039 | flags |= (qc->dev->link->pmp & 0xf) << CRQB_PMP_SHIFT; |
31961943 | 2040 | |
bdd4ddde | 2041 | /* get current queue index from software */ |
fcfb1f77 | 2042 | in_index = pp->req_idx; |
a6432436 ML |
2043 | |
2044 | pp->crqb[in_index].sg_addr = | |
eb73d558 | 2045 | cpu_to_le32(pp->sg_tbl_dma[qc->tag] & 0xffffffff); |
a6432436 | 2046 | pp->crqb[in_index].sg_addr_hi = |
eb73d558 | 2047 | cpu_to_le32((pp->sg_tbl_dma[qc->tag] >> 16) >> 16); |
a6432436 | 2048 | pp->crqb[in_index].ctrl_flags = cpu_to_le16(flags); |
31961943 | 2049 | |
a6432436 | 2050 | cw = &pp->crqb[in_index].ata_cmd[0]; |
31961943 | 2051 | |
25985edc | 2052 | /* Sadly, the CRQB cannot accommodate all registers--there are |
31961943 BR |
2053 | * only 11 bytes...so we must pick and choose required |
2054 | * registers based on the command. So, we drop feature and | |
2055 | * hob_feature for [RW] DMA commands, but they are needed for | |
cd12e1f7 ML |
2056 | * NCQ. NCQ will drop hob_nsect, which is not needed there |
2057 | * (nsect is used only for the tag; feat/hob_feat hold true nsect). | |
20f733e7 | 2058 | */ |
31961943 BR |
2059 | switch (tf->command) { |
2060 | case ATA_CMD_READ: | |
2061 | case ATA_CMD_READ_EXT: | |
2062 | case ATA_CMD_WRITE: | |
2063 | case ATA_CMD_WRITE_EXT: | |
c15d85c8 | 2064 | case ATA_CMD_WRITE_FUA_EXT: |
31961943 BR |
2065 | mv_crqb_pack_cmd(cw++, tf->hob_nsect, ATA_REG_NSECT, 0); |
2066 | break; | |
31961943 BR |
2067 | case ATA_CMD_FPDMA_READ: |
2068 | case ATA_CMD_FPDMA_WRITE: | |
8b260248 | 2069 | mv_crqb_pack_cmd(cw++, tf->hob_feature, ATA_REG_FEATURE, 0); |
31961943 BR |
2070 | mv_crqb_pack_cmd(cw++, tf->feature, ATA_REG_FEATURE, 0); |
2071 | break; | |
31961943 BR |
2072 | default: |
2073 | /* The only other commands EDMA supports in non-queued and | |
2074 | * non-NCQ mode are: [RW] STREAM DMA and W DMA FUA EXT, none | |
2075 | * of which are defined/used by Linux. If we get here, this | |
2076 | * driver needs work. | |
2077 | * | |
2078 | * FIXME: modify libata to give qc_prep a return value and | |
2079 | * return error here. | |
2080 | */ | |
2081 | BUG_ON(tf->command); | |
2082 | break; | |
2083 | } | |
2084 | mv_crqb_pack_cmd(cw++, tf->nsect, ATA_REG_NSECT, 0); | |
2085 | mv_crqb_pack_cmd(cw++, tf->hob_lbal, ATA_REG_LBAL, 0); | |
2086 | mv_crqb_pack_cmd(cw++, tf->lbal, ATA_REG_LBAL, 0); | |
2087 | mv_crqb_pack_cmd(cw++, tf->hob_lbam, ATA_REG_LBAM, 0); | |
2088 | mv_crqb_pack_cmd(cw++, tf->lbam, ATA_REG_LBAM, 0); | |
2089 | mv_crqb_pack_cmd(cw++, tf->hob_lbah, ATA_REG_LBAH, 0); | |
2090 | mv_crqb_pack_cmd(cw++, tf->lbah, ATA_REG_LBAH, 0); | |
2091 | mv_crqb_pack_cmd(cw++, tf->device, ATA_REG_DEVICE, 0); | |
2092 | mv_crqb_pack_cmd(cw++, tf->command, ATA_REG_CMD, 1); /* last */ | |
2093 | ||
e4e7b892 JG |
2094 | if (!(qc->flags & ATA_QCFLAG_DMAMAP)) |
2095 | return; | |
2096 | mv_fill_sg(qc); | |
2097 | } | |
2098 | ||
2099 | /** | |
2100 | * mv_qc_prep_iie - Host specific command preparation. | |
2101 | * @qc: queued command to prepare | |
2102 | * | |
2103 | * This routine simply redirects to the general purpose routine | |
2104 | * if command is not DMA. Else, it handles prep of the CRQB | |
2105 | * (command request block), does some sanity checking, and calls | |
2106 | * the SG load routine. | |
2107 | * | |
2108 | * LOCKING: | |
2109 | * Inherited from caller. | |
2110 | */ | |
2111 | static void mv_qc_prep_iie(struct ata_queued_cmd *qc) | |
2112 | { | |
2113 | struct ata_port *ap = qc->ap; | |
2114 | struct mv_port_priv *pp = ap->private_data; | |
2115 | struct mv_crqb_iie *crqb; | |
8d2b450d | 2116 | struct ata_taskfile *tf = &qc->tf; |
a6432436 | 2117 | unsigned in_index; |
e4e7b892 JG |
2118 | u32 flags = 0; |
2119 | ||
8d2b450d ML |
2120 | if ((tf->protocol != ATA_PROT_DMA) && |
2121 | (tf->protocol != ATA_PROT_NCQ)) | |
e4e7b892 | 2122 | return; |
44b73380 ML |
2123 | if (tf->command == ATA_CMD_DSM) |
2124 | return; /* use bmdma for this */ | |
e4e7b892 | 2125 | |
e12bef50 | 2126 | /* Fill in Gen IIE command request block */ |
8d2b450d | 2127 | if (!(tf->flags & ATA_TFLAG_WRITE)) |
e4e7b892 JG |
2128 | flags |= CRQB_FLAG_READ; |
2129 | ||
beec7dbc | 2130 | WARN_ON(MV_MAX_Q_DEPTH <= qc->tag); |
e4e7b892 | 2131 | flags |= qc->tag << CRQB_TAG_SHIFT; |
8c0aeb4a | 2132 | flags |= qc->tag << CRQB_HOSTQ_SHIFT; |
e49856d8 | 2133 | flags |= (qc->dev->link->pmp & 0xf) << CRQB_PMP_SHIFT; |
e4e7b892 | 2134 | |
bdd4ddde | 2135 | /* get current queue index from software */ |
fcfb1f77 | 2136 | in_index = pp->req_idx; |
a6432436 ML |
2137 | |
2138 | crqb = (struct mv_crqb_iie *) &pp->crqb[in_index]; | |
eb73d558 ML |
2139 | crqb->addr = cpu_to_le32(pp->sg_tbl_dma[qc->tag] & 0xffffffff); |
2140 | crqb->addr_hi = cpu_to_le32((pp->sg_tbl_dma[qc->tag] >> 16) >> 16); | |
e4e7b892 JG |
2141 | crqb->flags = cpu_to_le32(flags); |
2142 | ||
e4e7b892 JG |
2143 | crqb->ata_cmd[0] = cpu_to_le32( |
2144 | (tf->command << 16) | | |
2145 | (tf->feature << 24) | |
2146 | ); | |
2147 | crqb->ata_cmd[1] = cpu_to_le32( | |
2148 | (tf->lbal << 0) | | |
2149 | (tf->lbam << 8) | | |
2150 | (tf->lbah << 16) | | |
2151 | (tf->device << 24) | |
2152 | ); | |
2153 | crqb->ata_cmd[2] = cpu_to_le32( | |
2154 | (tf->hob_lbal << 0) | | |
2155 | (tf->hob_lbam << 8) | | |
2156 | (tf->hob_lbah << 16) | | |
2157 | (tf->hob_feature << 24) | |
2158 | ); | |
2159 | crqb->ata_cmd[3] = cpu_to_le32( | |
2160 | (tf->nsect << 0) | | |
2161 | (tf->hob_nsect << 8) | |
2162 | ); | |
2163 | ||
2164 | if (!(qc->flags & ATA_QCFLAG_DMAMAP)) | |
31961943 | 2165 | return; |
31961943 BR |
2166 | mv_fill_sg(qc); |
2167 | } | |
2168 | ||
d16ab3f6 ML |
2169 | /** |
2170 | * mv_sff_check_status - fetch device status, if valid | |
2171 | * @ap: ATA port to fetch status from | |
2172 | * | |
2173 | * When using command issue via mv_qc_issue_fis(), | |
2174 | * the initial ATA_BUSY state does not show up in the | |
2175 | * ATA status (shadow) register. This can confuse libata! | |
2176 | * | |
2177 | * So we have a hook here to fake ATA_BUSY for that situation, | |
2178 | * until the first time a BUSY, DRQ, or ERR bit is seen. | |
2179 | * | |
2180 | * The rest of the time, it simply returns the ATA status register. | |
2181 | */ | |
2182 | static u8 mv_sff_check_status(struct ata_port *ap) | |
2183 | { | |
2184 | u8 stat = ioread8(ap->ioaddr.status_addr); | |
2185 | struct mv_port_priv *pp = ap->private_data; | |
2186 | ||
2187 | if (pp->pp_flags & MV_PP_FLAG_FAKE_ATA_BUSY) { | |
2188 | if (stat & (ATA_BUSY | ATA_DRQ | ATA_ERR)) | |
2189 | pp->pp_flags &= ~MV_PP_FLAG_FAKE_ATA_BUSY; | |
2190 | else | |
2191 | stat = ATA_BUSY; | |
2192 | } | |
2193 | return stat; | |
2194 | } | |
2195 | ||
70f8b79c ML |
2196 | /** |
2197 | * mv_send_fis - Send a FIS, using the "Vendor-Unique FIS" register | |
2198 | * @fis: fis to be sent | |
2199 | * @nwords: number of 32-bit words in the fis | |
2200 | */ | |
2201 | static unsigned int mv_send_fis(struct ata_port *ap, u32 *fis, int nwords) | |
2202 | { | |
2203 | void __iomem *port_mmio = mv_ap_base(ap); | |
2204 | u32 ifctl, old_ifctl, ifstat; | |
2205 | int i, timeout = 200, final_word = nwords - 1; | |
2206 | ||
2207 | /* Initiate FIS transmission mode */ | |
cae5a29d | 2208 | old_ifctl = readl(port_mmio + SATA_IFCTL); |
70f8b79c | 2209 | ifctl = 0x100 | (old_ifctl & 0xf); |
cae5a29d | 2210 | writelfl(ifctl, port_mmio + SATA_IFCTL); |
70f8b79c ML |
2211 | |
2212 | /* Send all words of the FIS except for the final word */ | |
2213 | for (i = 0; i < final_word; ++i) | |
cae5a29d | 2214 | writel(fis[i], port_mmio + VENDOR_UNIQUE_FIS); |
70f8b79c ML |
2215 | |
2216 | /* Flag end-of-transmission, and then send the final word */ | |
cae5a29d ML |
2217 | writelfl(ifctl | 0x200, port_mmio + SATA_IFCTL); |
2218 | writelfl(fis[final_word], port_mmio + VENDOR_UNIQUE_FIS); | |
70f8b79c ML |
2219 | |
2220 | /* | |
2221 | * Wait for FIS transmission to complete. | |
2222 | * This typically takes just a single iteration. | |
2223 | */ | |
2224 | do { | |
cae5a29d | 2225 | ifstat = readl(port_mmio + SATA_IFSTAT); |
70f8b79c ML |
2226 | } while (!(ifstat & 0x1000) && --timeout); |
2227 | ||
2228 | /* Restore original port configuration */ | |
cae5a29d | 2229 | writelfl(old_ifctl, port_mmio + SATA_IFCTL); |
70f8b79c ML |
2230 | |
2231 | /* See if it worked */ | |
2232 | if ((ifstat & 0x3000) != 0x1000) { | |
a9a79dfe JP |
2233 | ata_port_warn(ap, "%s transmission error, ifstat=%08x\n", |
2234 | __func__, ifstat); | |
70f8b79c ML |
2235 | return AC_ERR_OTHER; |
2236 | } | |
2237 | return 0; | |
2238 | } | |
2239 | ||
2240 | /** | |
2241 | * mv_qc_issue_fis - Issue a command directly as a FIS | |
2242 | * @qc: queued command to start | |
2243 | * | |
2244 | * Note that the ATA shadow registers are not updated | |
2245 | * after command issue, so the device will appear "READY" | |
2246 | * if polled, even while it is BUSY processing the command. | |
2247 | * | |
2248 | * So we use a status hook to fake ATA_BUSY until the drive changes state. | |
2249 | * | |
2250 | * Note: we don't get updated shadow regs on *completion* | |
2251 | * of non-data commands. So avoid sending them via this function, | |
2252 | * as they will appear to have completed immediately. | |
2253 | * | |
2254 | * GEN_IIE has special registers that we could get the result tf from, | |
2255 | * but earlier chipsets do not. For now, we ignore those registers. | |
2256 | */ | |
2257 | static unsigned int mv_qc_issue_fis(struct ata_queued_cmd *qc) | |
2258 | { | |
2259 | struct ata_port *ap = qc->ap; | |
2260 | struct mv_port_priv *pp = ap->private_data; | |
2261 | struct ata_link *link = qc->dev->link; | |
2262 | u32 fis[5]; | |
2263 | int err = 0; | |
2264 | ||
2265 | ata_tf_to_fis(&qc->tf, link->pmp, 1, (void *)fis); | |
4c4a90fd | 2266 | err = mv_send_fis(ap, fis, ARRAY_SIZE(fis)); |
70f8b79c ML |
2267 | if (err) |
2268 | return err; | |
2269 | ||
2270 | switch (qc->tf.protocol) { | |
2271 | case ATAPI_PROT_PIO: | |
2272 | pp->pp_flags |= MV_PP_FLAG_FAKE_ATA_BUSY; | |
2273 | /* fall through */ | |
2274 | case ATAPI_PROT_NODATA: | |
2275 | ap->hsm_task_state = HSM_ST_FIRST; | |
2276 | break; | |
2277 | case ATA_PROT_PIO: | |
2278 | pp->pp_flags |= MV_PP_FLAG_FAKE_ATA_BUSY; | |
2279 | if (qc->tf.flags & ATA_TFLAG_WRITE) | |
2280 | ap->hsm_task_state = HSM_ST_FIRST; | |
2281 | else | |
2282 | ap->hsm_task_state = HSM_ST; | |
2283 | break; | |
2284 | default: | |
2285 | ap->hsm_task_state = HSM_ST_LAST; | |
2286 | break; | |
2287 | } | |
2288 | ||
2289 | if (qc->tf.flags & ATA_TFLAG_POLLING) | |
ea3c6450 | 2290 | ata_sff_queue_pio_task(link, 0); |
70f8b79c ML |
2291 | return 0; |
2292 | } | |
2293 | ||
05b308e1 BR |
2294 | /** |
2295 | * mv_qc_issue - Initiate a command to the host | |
2296 | * @qc: queued command to start | |
2297 | * | |
2298 | * This routine simply redirects to the general purpose routine | |
2299 | * if command is not DMA. Else, it sanity checks our local | |
2300 | * caches of the request producer/consumer indices then enables | |
2301 | * DMA and bumps the request producer index. | |
2302 | * | |
2303 | * LOCKING: | |
2304 | * Inherited from caller. | |
2305 | */ | |
9a3d9eb0 | 2306 | static unsigned int mv_qc_issue(struct ata_queued_cmd *qc) |
31961943 | 2307 | { |
f48765cc | 2308 | static int limit_warnings = 10; |
c5d3e45a JG |
2309 | struct ata_port *ap = qc->ap; |
2310 | void __iomem *port_mmio = mv_ap_base(ap); | |
2311 | struct mv_port_priv *pp = ap->private_data; | |
bdd4ddde | 2312 | u32 in_index; |
42ed893d | 2313 | unsigned int port_irqs; |
f48765cc | 2314 | |
d16ab3f6 ML |
2315 | pp->pp_flags &= ~MV_PP_FLAG_FAKE_ATA_BUSY; /* paranoia */ |
2316 | ||
f48765cc ML |
2317 | switch (qc->tf.protocol) { |
2318 | case ATA_PROT_DMA: | |
44b73380 ML |
2319 | if (qc->tf.command == ATA_CMD_DSM) { |
2320 | if (!ap->ops->bmdma_setup) /* no bmdma on GEN_I */ | |
2321 | return AC_ERR_OTHER; | |
2322 | break; /* use bmdma for this */ | |
2323 | } | |
2324 | /* fall thru */ | |
f48765cc ML |
2325 | case ATA_PROT_NCQ: |
2326 | mv_start_edma(ap, port_mmio, pp, qc->tf.protocol); | |
2327 | pp->req_idx = (pp->req_idx + 1) & MV_MAX_Q_DEPTH_MASK; | |
2328 | in_index = pp->req_idx << EDMA_REQ_Q_PTR_SHIFT; | |
2329 | ||
2330 | /* Write the request in pointer to kick the EDMA to life */ | |
2331 | writelfl((pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK) | in_index, | |
cae5a29d | 2332 | port_mmio + EDMA_REQ_Q_IN_PTR); |
f48765cc | 2333 | return 0; |
31961943 | 2334 | |
f48765cc | 2335 | case ATA_PROT_PIO: |
c6112bd8 ML |
2336 | /* |
2337 | * Errata SATA#16, SATA#24: warn if multiple DRQs expected. | |
2338 | * | |
2339 | * Someday, we might implement special polling workarounds | |
2340 | * for these, but it all seems rather unnecessary since we | |
2341 | * normally use only DMA for commands which transfer more | |
2342 | * than a single block of data. | |
2343 | * | |
2344 | * Much of the time, this could just work regardless. | |
2345 | * So for now, just log the incident, and allow the attempt. | |
2346 | */ | |
c7843e8f | 2347 | if (limit_warnings > 0 && (qc->nbytes / qc->sect_size) > 1) { |
c6112bd8 | 2348 | --limit_warnings; |
a9a79dfe JP |
2349 | ata_link_warn(qc->dev->link, DRV_NAME |
2350 | ": attempting PIO w/multiple DRQ: " | |
2351 | "this may fail due to h/w errata\n"); | |
c6112bd8 | 2352 | } |
f48765cc | 2353 | /* drop through */ |
42ed893d | 2354 | case ATA_PROT_NODATA: |
f48765cc | 2355 | case ATAPI_PROT_PIO: |
42ed893d ML |
2356 | case ATAPI_PROT_NODATA: |
2357 | if (ap->flags & ATA_FLAG_PIO_POLLING) | |
2358 | qc->tf.flags |= ATA_TFLAG_POLLING; | |
2359 | break; | |
31961943 | 2360 | } |
42ed893d ML |
2361 | |
2362 | if (qc->tf.flags & ATA_TFLAG_POLLING) | |
2363 | port_irqs = ERR_IRQ; /* mask device interrupt when polling */ | |
2364 | else | |
2365 | port_irqs = ERR_IRQ | DONE_IRQ; /* unmask all interrupts */ | |
2366 | ||
2367 | /* | |
2368 | * We're about to send a non-EDMA capable command to the | |
2369 | * port. Turn off EDMA so there won't be problems accessing | |
2370 | * shadow block, etc registers. | |
2371 | */ | |
2372 | mv_stop_edma(ap); | |
2373 | mv_clear_and_enable_port_irqs(ap, mv_ap_base(ap), port_irqs); | |
2374 | mv_pmp_select(ap, qc->dev->link->pmp); | |
70f8b79c ML |
2375 | |
2376 | if (qc->tf.command == ATA_CMD_READ_LOG_EXT) { | |
2377 | struct mv_host_priv *hpriv = ap->host->private_data; | |
2378 | /* | |
2379 | * Workaround for 88SX60x1 FEr SATA#25 (part 2). | |
40f21b11 | 2380 | * |
70f8b79c ML |
2381 | * After any NCQ error, the READ_LOG_EXT command |
2382 | * from libata-eh *must* use mv_qc_issue_fis(). | |
2383 | * Otherwise it might fail, due to chip errata. | |
2384 | * | |
2385 | * Rather than special-case it, we'll just *always* | |
2386 | * use this method here for READ_LOG_EXT, making for | |
2387 | * easier testing. | |
2388 | */ | |
2389 | if (IS_GEN_II(hpriv)) | |
2390 | return mv_qc_issue_fis(qc); | |
2391 | } | |
360ff783 | 2392 | return ata_bmdma_qc_issue(qc); |
31961943 BR |
2393 | } |
2394 | ||
8f767f8a ML |
2395 | static struct ata_queued_cmd *mv_get_active_qc(struct ata_port *ap) |
2396 | { | |
2397 | struct mv_port_priv *pp = ap->private_data; | |
2398 | struct ata_queued_cmd *qc; | |
2399 | ||
2400 | if (pp->pp_flags & MV_PP_FLAG_NCQ_EN) | |
2401 | return NULL; | |
2402 | qc = ata_qc_from_tag(ap, ap->link.active_tag); | |
3e4ec344 TH |
2403 | if (qc && !(qc->tf.flags & ATA_TFLAG_POLLING)) |
2404 | return qc; | |
2405 | return NULL; | |
8f767f8a ML |
2406 | } |
2407 | ||
29d187bb ML |
2408 | static void mv_pmp_error_handler(struct ata_port *ap) |
2409 | { | |
2410 | unsigned int pmp, pmp_map; | |
2411 | struct mv_port_priv *pp = ap->private_data; | |
2412 | ||
2413 | if (pp->pp_flags & MV_PP_FLAG_DELAYED_EH) { | |
2414 | /* | |
2415 | * Perform NCQ error analysis on failed PMPs | |
2416 | * before we freeze the port entirely. | |
2417 | * | |
2418 | * The failed PMPs are marked earlier by mv_pmp_eh_prep(). | |
2419 | */ | |
2420 | pmp_map = pp->delayed_eh_pmp_map; | |
2421 | pp->pp_flags &= ~MV_PP_FLAG_DELAYED_EH; | |
2422 | for (pmp = 0; pmp_map != 0; pmp++) { | |
2423 | unsigned int this_pmp = (1 << pmp); | |
2424 | if (pmp_map & this_pmp) { | |
2425 | struct ata_link *link = &ap->pmp_link[pmp]; | |
2426 | pmp_map &= ~this_pmp; | |
2427 | ata_eh_analyze_ncq_error(link); | |
2428 | } | |
2429 | } | |
2430 | ata_port_freeze(ap); | |
2431 | } | |
2432 | sata_pmp_error_handler(ap); | |
2433 | } | |
2434 | ||
4c299ca3 ML |
2435 | static unsigned int mv_get_err_pmp_map(struct ata_port *ap) |
2436 | { | |
2437 | void __iomem *port_mmio = mv_ap_base(ap); | |
2438 | ||
cae5a29d | 2439 | return readl(port_mmio + SATA_TESTCTL) >> 16; |
4c299ca3 ML |
2440 | } |
2441 | ||
4c299ca3 ML |
2442 | static void mv_pmp_eh_prep(struct ata_port *ap, unsigned int pmp_map) |
2443 | { | |
2444 | struct ata_eh_info *ehi; | |
2445 | unsigned int pmp; | |
2446 | ||
2447 | /* | |
2448 | * Initialize EH info for PMPs which saw device errors | |
2449 | */ | |
2450 | ehi = &ap->link.eh_info; | |
2451 | for (pmp = 0; pmp_map != 0; pmp++) { | |
2452 | unsigned int this_pmp = (1 << pmp); | |
2453 | if (pmp_map & this_pmp) { | |
2454 | struct ata_link *link = &ap->pmp_link[pmp]; | |
2455 | ||
2456 | pmp_map &= ~this_pmp; | |
2457 | ehi = &link->eh_info; | |
2458 | ata_ehi_clear_desc(ehi); | |
2459 | ata_ehi_push_desc(ehi, "dev err"); | |
2460 | ehi->err_mask |= AC_ERR_DEV; | |
2461 | ehi->action |= ATA_EH_RESET; | |
2462 | ata_link_abort(link); | |
2463 | } | |
2464 | } | |
2465 | } | |
2466 | ||
06aaca3f ML |
2467 | static int mv_req_q_empty(struct ata_port *ap) |
2468 | { | |
2469 | void __iomem *port_mmio = mv_ap_base(ap); | |
2470 | u32 in_ptr, out_ptr; | |
2471 | ||
cae5a29d | 2472 | in_ptr = (readl(port_mmio + EDMA_REQ_Q_IN_PTR) |
06aaca3f | 2473 | >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK; |
cae5a29d | 2474 | out_ptr = (readl(port_mmio + EDMA_REQ_Q_OUT_PTR) |
06aaca3f ML |
2475 | >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK; |
2476 | return (in_ptr == out_ptr); /* 1 == queue_is_empty */ | |
2477 | } | |
2478 | ||
4c299ca3 ML |
2479 | static int mv_handle_fbs_ncq_dev_err(struct ata_port *ap) |
2480 | { | |
2481 | struct mv_port_priv *pp = ap->private_data; | |
2482 | int failed_links; | |
2483 | unsigned int old_map, new_map; | |
2484 | ||
2485 | /* | |
2486 | * Device error during FBS+NCQ operation: | |
2487 | * | |
2488 | * Set a port flag to prevent further I/O being enqueued. | |
2489 | * Leave the EDMA running to drain outstanding commands from this port. | |
2490 | * Perform the post-mortem/EH only when all responses are complete. | |
2491 | * Follow recovery sequence from 6042/7042 datasheet (7.3.15.4.2.2). | |
2492 | */ | |
2493 | if (!(pp->pp_flags & MV_PP_FLAG_DELAYED_EH)) { | |
2494 | pp->pp_flags |= MV_PP_FLAG_DELAYED_EH; | |
2495 | pp->delayed_eh_pmp_map = 0; | |
2496 | } | |
2497 | old_map = pp->delayed_eh_pmp_map; | |
2498 | new_map = old_map | mv_get_err_pmp_map(ap); | |
2499 | ||
2500 | if (old_map != new_map) { | |
2501 | pp->delayed_eh_pmp_map = new_map; | |
2502 | mv_pmp_eh_prep(ap, new_map & ~old_map); | |
2503 | } | |
c46938cc | 2504 | failed_links = hweight16(new_map); |
4c299ca3 | 2505 | |
a9a79dfe JP |
2506 | ata_port_info(ap, |
2507 | "%s: pmp_map=%04x qc_map=%04x failed_links=%d nr_active_links=%d\n", | |
2508 | __func__, pp->delayed_eh_pmp_map, | |
2509 | ap->qc_active, failed_links, | |
2510 | ap->nr_active_links); | |
4c299ca3 | 2511 | |
06aaca3f | 2512 | if (ap->nr_active_links <= failed_links && mv_req_q_empty(ap)) { |
4c299ca3 ML |
2513 | mv_process_crpb_entries(ap, pp); |
2514 | mv_stop_edma(ap); | |
2515 | mv_eh_freeze(ap); | |
a9a79dfe | 2516 | ata_port_info(ap, "%s: done\n", __func__); |
4c299ca3 ML |
2517 | return 1; /* handled */ |
2518 | } | |
a9a79dfe | 2519 | ata_port_info(ap, "%s: waiting\n", __func__); |
4c299ca3 ML |
2520 | return 1; /* handled */ |
2521 | } | |
2522 | ||
2523 | static int mv_handle_fbs_non_ncq_dev_err(struct ata_port *ap) | |
2524 | { | |
2525 | /* | |
2526 | * Possible future enhancement: | |
2527 | * | |
2528 | * FBS+non-NCQ operation is not yet implemented. | |
2529 | * See related notes in mv_edma_cfg(). | |
2530 | * | |
2531 | * Device error during FBS+non-NCQ operation: | |
2532 | * | |
2533 | * We need to snapshot the shadow registers for each failed command. | |
2534 | * Follow recovery sequence from 6042/7042 datasheet (7.3.15.4.2.3). | |
2535 | */ | |
2536 | return 0; /* not handled */ | |
2537 | } | |
2538 | ||
2539 | static int mv_handle_dev_err(struct ata_port *ap, u32 edma_err_cause) | |
2540 | { | |
2541 | struct mv_port_priv *pp = ap->private_data; | |
2542 | ||
2543 | if (!(pp->pp_flags & MV_PP_FLAG_EDMA_EN)) | |
2544 | return 0; /* EDMA was not active: not handled */ | |
2545 | if (!(pp->pp_flags & MV_PP_FLAG_FBS_EN)) | |
2546 | return 0; /* FBS was not active: not handled */ | |
2547 | ||
2548 | if (!(edma_err_cause & EDMA_ERR_DEV)) | |
2549 | return 0; /* non DEV error: not handled */ | |
2550 | edma_err_cause &= ~EDMA_ERR_IRQ_TRANSIENT; | |
2551 | if (edma_err_cause & ~(EDMA_ERR_DEV | EDMA_ERR_SELF_DIS)) | |
2552 | return 0; /* other problems: not handled */ | |
2553 | ||
2554 | if (pp->pp_flags & MV_PP_FLAG_NCQ_EN) { | |
2555 | /* | |
2556 | * EDMA should NOT have self-disabled for this case. | |
2557 | * If it did, then something is wrong elsewhere, | |
2558 | * and we cannot handle it here. | |
2559 | */ | |
2560 | if (edma_err_cause & EDMA_ERR_SELF_DIS) { | |
a9a79dfe JP |
2561 | ata_port_warn(ap, "%s: err_cause=0x%x pp_flags=0x%x\n", |
2562 | __func__, edma_err_cause, pp->pp_flags); | |
4c299ca3 ML |
2563 | return 0; /* not handled */ |
2564 | } | |
2565 | return mv_handle_fbs_ncq_dev_err(ap); | |
2566 | } else { | |
2567 | /* | |
2568 | * EDMA should have self-disabled for this case. | |
2569 | * If it did not, then something is wrong elsewhere, | |
2570 | * and we cannot handle it here. | |
2571 | */ | |
2572 | if (!(edma_err_cause & EDMA_ERR_SELF_DIS)) { | |
a9a79dfe JP |
2573 | ata_port_warn(ap, "%s: err_cause=0x%x pp_flags=0x%x\n", |
2574 | __func__, edma_err_cause, pp->pp_flags); | |
4c299ca3 ML |
2575 | return 0; /* not handled */ |
2576 | } | |
2577 | return mv_handle_fbs_non_ncq_dev_err(ap); | |
2578 | } | |
2579 | return 0; /* not handled */ | |
2580 | } | |
2581 | ||
a9010329 | 2582 | static void mv_unexpected_intr(struct ata_port *ap, int edma_was_enabled) |
8f767f8a | 2583 | { |
8f767f8a | 2584 | struct ata_eh_info *ehi = &ap->link.eh_info; |
a9010329 | 2585 | char *when = "idle"; |
8f767f8a | 2586 | |
8f767f8a | 2587 | ata_ehi_clear_desc(ehi); |
3e4ec344 | 2588 | if (edma_was_enabled) { |
a9010329 | 2589 | when = "EDMA enabled"; |
8f767f8a ML |
2590 | } else { |
2591 | struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->link.active_tag); | |
2592 | if (qc && (qc->tf.flags & ATA_TFLAG_POLLING)) | |
a9010329 | 2593 | when = "polling"; |
8f767f8a | 2594 | } |
a9010329 | 2595 | ata_ehi_push_desc(ehi, "unexpected device interrupt while %s", when); |
8f767f8a ML |
2596 | ehi->err_mask |= AC_ERR_OTHER; |
2597 | ehi->action |= ATA_EH_RESET; | |
2598 | ata_port_freeze(ap); | |
2599 | } | |
2600 | ||
05b308e1 BR |
2601 | /** |
2602 | * mv_err_intr - Handle error interrupts on the port | |
2603 | * @ap: ATA channel to manipulate | |
2604 | * | |
8d07379d ML |
2605 | * Most cases require a full reset of the chip's state machine, |
2606 | * which also performs a COMRESET. | |
2607 | * Also, if the port disabled DMA, update our cached copy to match. | |
05b308e1 BR |
2608 | * |
2609 | * LOCKING: | |
2610 | * Inherited from caller. | |
2611 | */ | |
37b9046a | 2612 | static void mv_err_intr(struct ata_port *ap) |
31961943 BR |
2613 | { |
2614 | void __iomem *port_mmio = mv_ap_base(ap); | |
bdd4ddde | 2615 | u32 edma_err_cause, eh_freeze_mask, serr = 0; |
e4006077 | 2616 | u32 fis_cause = 0; |
bdd4ddde JG |
2617 | struct mv_port_priv *pp = ap->private_data; |
2618 | struct mv_host_priv *hpriv = ap->host->private_data; | |
bdd4ddde | 2619 | unsigned int action = 0, err_mask = 0; |
9af5c9c9 | 2620 | struct ata_eh_info *ehi = &ap->link.eh_info; |
37b9046a ML |
2621 | struct ata_queued_cmd *qc; |
2622 | int abort = 0; | |
20f733e7 | 2623 | |
8d07379d | 2624 | /* |
37b9046a | 2625 | * Read and clear the SError and err_cause bits. |
e4006077 ML |
2626 | * For GenIIe, if EDMA_ERR_TRANS_IRQ_7 is set, we also must read/clear |
2627 | * the FIS_IRQ_CAUSE register before clearing edma_err_cause. | |
8d07379d | 2628 | */ |
37b9046a ML |
2629 | sata_scr_read(&ap->link, SCR_ERROR, &serr); |
2630 | sata_scr_write_flush(&ap->link, SCR_ERROR, serr); | |
2631 | ||
cae5a29d | 2632 | edma_err_cause = readl(port_mmio + EDMA_ERR_IRQ_CAUSE); |
e4006077 | 2633 | if (IS_GEN_IIE(hpriv) && (edma_err_cause & EDMA_ERR_TRANS_IRQ_7)) { |
cae5a29d ML |
2634 | fis_cause = readl(port_mmio + FIS_IRQ_CAUSE); |
2635 | writelfl(~fis_cause, port_mmio + FIS_IRQ_CAUSE); | |
e4006077 | 2636 | } |
cae5a29d | 2637 | writelfl(~edma_err_cause, port_mmio + EDMA_ERR_IRQ_CAUSE); |
bdd4ddde | 2638 | |
4c299ca3 ML |
2639 | if (edma_err_cause & EDMA_ERR_DEV) { |
2640 | /* | |
2641 | * Device errors during FIS-based switching operation | |
2642 | * require special handling. | |
2643 | */ | |
2644 | if (mv_handle_dev_err(ap, edma_err_cause)) | |
2645 | return; | |
2646 | } | |
2647 | ||
37b9046a ML |
2648 | qc = mv_get_active_qc(ap); |
2649 | ata_ehi_clear_desc(ehi); | |
2650 | ata_ehi_push_desc(ehi, "edma_err_cause=%08x pp_flags=%08x", | |
2651 | edma_err_cause, pp->pp_flags); | |
e4006077 | 2652 | |
c443c500 | 2653 | if (IS_GEN_IIE(hpriv) && (edma_err_cause & EDMA_ERR_TRANS_IRQ_7)) { |
e4006077 | 2654 | ata_ehi_push_desc(ehi, "fis_cause=%08x", fis_cause); |
cae5a29d | 2655 | if (fis_cause & FIS_IRQ_CAUSE_AN) { |
c443c500 ML |
2656 | u32 ec = edma_err_cause & |
2657 | ~(EDMA_ERR_TRANS_IRQ_7 | EDMA_ERR_IRQ_TRANSIENT); | |
2658 | sata_async_notification(ap); | |
2659 | if (!ec) | |
2660 | return; /* Just an AN; no need for the nukes */ | |
2661 | ata_ehi_push_desc(ehi, "SDB notify"); | |
2662 | } | |
2663 | } | |
bdd4ddde | 2664 | /* |
352fab70 | 2665 | * All generations share these EDMA error cause bits: |
bdd4ddde | 2666 | */ |
37b9046a | 2667 | if (edma_err_cause & EDMA_ERR_DEV) { |
bdd4ddde | 2668 | err_mask |= AC_ERR_DEV; |
37b9046a ML |
2669 | action |= ATA_EH_RESET; |
2670 | ata_ehi_push_desc(ehi, "dev error"); | |
2671 | } | |
bdd4ddde | 2672 | if (edma_err_cause & (EDMA_ERR_D_PAR | EDMA_ERR_PRD_PAR | |
6c1153e0 | 2673 | EDMA_ERR_CRQB_PAR | EDMA_ERR_CRPB_PAR | |
bdd4ddde JG |
2674 | EDMA_ERR_INTRL_PAR)) { |
2675 | err_mask |= AC_ERR_ATA_BUS; | |
cf480626 | 2676 | action |= ATA_EH_RESET; |
b64bbc39 | 2677 | ata_ehi_push_desc(ehi, "parity error"); |
bdd4ddde JG |
2678 | } |
2679 | if (edma_err_cause & (EDMA_ERR_DEV_DCON | EDMA_ERR_DEV_CON)) { | |
2680 | ata_ehi_hotplugged(ehi); | |
2681 | ata_ehi_push_desc(ehi, edma_err_cause & EDMA_ERR_DEV_DCON ? | |
b64bbc39 | 2682 | "dev disconnect" : "dev connect"); |
cf480626 | 2683 | action |= ATA_EH_RESET; |
bdd4ddde JG |
2684 | } |
2685 | ||
352fab70 ML |
2686 | /* |
2687 | * Gen-I has a different SELF_DIS bit, | |
2688 | * different FREEZE bits, and no SERR bit: | |
2689 | */ | |
ee9ccdf7 | 2690 | if (IS_GEN_I(hpriv)) { |
bdd4ddde | 2691 | eh_freeze_mask = EDMA_EH_FREEZE_5; |
bdd4ddde | 2692 | if (edma_err_cause & EDMA_ERR_SELF_DIS_5) { |
bdd4ddde | 2693 | pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN; |
b64bbc39 | 2694 | ata_ehi_push_desc(ehi, "EDMA self-disable"); |
bdd4ddde JG |
2695 | } |
2696 | } else { | |
2697 | eh_freeze_mask = EDMA_EH_FREEZE; | |
bdd4ddde | 2698 | if (edma_err_cause & EDMA_ERR_SELF_DIS) { |
bdd4ddde | 2699 | pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN; |
b64bbc39 | 2700 | ata_ehi_push_desc(ehi, "EDMA self-disable"); |
bdd4ddde | 2701 | } |
bdd4ddde | 2702 | if (edma_err_cause & EDMA_ERR_SERR) { |
8d07379d ML |
2703 | ata_ehi_push_desc(ehi, "SError=%08x", serr); |
2704 | err_mask |= AC_ERR_ATA_BUS; | |
cf480626 | 2705 | action |= ATA_EH_RESET; |
bdd4ddde | 2706 | } |
afb0edd9 | 2707 | } |
20f733e7 | 2708 | |
bdd4ddde JG |
2709 | if (!err_mask) { |
2710 | err_mask = AC_ERR_OTHER; | |
cf480626 | 2711 | action |= ATA_EH_RESET; |
bdd4ddde JG |
2712 | } |
2713 | ||
2714 | ehi->serror |= serr; | |
2715 | ehi->action |= action; | |
2716 | ||
2717 | if (qc) | |
2718 | qc->err_mask |= err_mask; | |
2719 | else | |
2720 | ehi->err_mask |= err_mask; | |
2721 | ||
37b9046a ML |
2722 | if (err_mask == AC_ERR_DEV) { |
2723 | /* | |
2724 | * Cannot do ata_port_freeze() here, | |
2725 | * because it would kill PIO access, | |
2726 | * which is needed for further diagnosis. | |
2727 | */ | |
2728 | mv_eh_freeze(ap); | |
2729 | abort = 1; | |
2730 | } else if (edma_err_cause & eh_freeze_mask) { | |
2731 | /* | |
2732 | * Note to self: ata_port_freeze() calls ata_port_abort() | |
2733 | */ | |
bdd4ddde | 2734 | ata_port_freeze(ap); |
37b9046a ML |
2735 | } else { |
2736 | abort = 1; | |
2737 | } | |
2738 | ||
2739 | if (abort) { | |
2740 | if (qc) | |
2741 | ata_link_abort(qc->dev->link); | |
2742 | else | |
2743 | ata_port_abort(ap); | |
2744 | } | |
bdd4ddde JG |
2745 | } |
2746 | ||
1aadf5c3 | 2747 | static bool mv_process_crpb_response(struct ata_port *ap, |
fcfb1f77 ML |
2748 | struct mv_crpb *response, unsigned int tag, int ncq_enabled) |
2749 | { | |
752e386c TH |
2750 | u8 ata_status; |
2751 | u16 edma_status = le16_to_cpu(response->flags); | |
752e386c TH |
2752 | |
2753 | /* | |
2754 | * edma_status from a response queue entry: | |
2755 | * LSB is from EDMA_ERR_IRQ_CAUSE (non-NCQ only). | |
2756 | * MSB is saved ATA status from command completion. | |
2757 | */ | |
2758 | if (!ncq_enabled) { | |
2759 | u8 err_cause = edma_status & 0xff & ~EDMA_ERR_DEV; | |
2760 | if (err_cause) { | |
2761 | /* | |
2762 | * Error will be seen/handled by | |
2763 | * mv_err_intr(). So do nothing at all here. | |
2764 | */ | |
1aadf5c3 | 2765 | return false; |
752e386c | 2766 | } |
fcfb1f77 | 2767 | } |
752e386c TH |
2768 | ata_status = edma_status >> CRPB_FLAG_STATUS_SHIFT; |
2769 | if (!ac_err_mask(ata_status)) | |
1aadf5c3 | 2770 | return true; |
752e386c | 2771 | /* else: leave it for mv_err_intr() */ |
1aadf5c3 | 2772 | return false; |
fcfb1f77 ML |
2773 | } |
2774 | ||
2775 | static void mv_process_crpb_entries(struct ata_port *ap, struct mv_port_priv *pp) | |
bdd4ddde JG |
2776 | { |
2777 | void __iomem *port_mmio = mv_ap_base(ap); | |
2778 | struct mv_host_priv *hpriv = ap->host->private_data; | |
fcfb1f77 | 2779 | u32 in_index; |
bdd4ddde | 2780 | bool work_done = false; |
1aadf5c3 | 2781 | u32 done_mask = 0; |
fcfb1f77 | 2782 | int ncq_enabled = (pp->pp_flags & MV_PP_FLAG_NCQ_EN); |
bdd4ddde | 2783 | |
fcfb1f77 | 2784 | /* Get the hardware queue position index */ |
cae5a29d | 2785 | in_index = (readl(port_mmio + EDMA_RSP_Q_IN_PTR) |
bdd4ddde JG |
2786 | >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK; |
2787 | ||
fcfb1f77 ML |
2788 | /* Process new responses from since the last time we looked */ |
2789 | while (in_index != pp->resp_idx) { | |
6c1153e0 | 2790 | unsigned int tag; |
fcfb1f77 | 2791 | struct mv_crpb *response = &pp->crpb[pp->resp_idx]; |
bdd4ddde | 2792 | |
fcfb1f77 | 2793 | pp->resp_idx = (pp->resp_idx + 1) & MV_MAX_Q_DEPTH_MASK; |
bdd4ddde | 2794 | |
fcfb1f77 ML |
2795 | if (IS_GEN_I(hpriv)) { |
2796 | /* 50xx: no NCQ, only one command active at a time */ | |
9af5c9c9 | 2797 | tag = ap->link.active_tag; |
fcfb1f77 ML |
2798 | } else { |
2799 | /* Gen II/IIE: get command tag from CRPB entry */ | |
2800 | tag = le16_to_cpu(response->id) & 0x1f; | |
bdd4ddde | 2801 | } |
1aadf5c3 TH |
2802 | if (mv_process_crpb_response(ap, response, tag, ncq_enabled)) |
2803 | done_mask |= 1 << tag; | |
bdd4ddde | 2804 | work_done = true; |
bdd4ddde JG |
2805 | } |
2806 | ||
1aadf5c3 TH |
2807 | if (work_done) { |
2808 | ata_qc_complete_multiple(ap, ap->qc_active ^ done_mask); | |
2809 | ||
2810 | /* Update the software queue position index in hardware */ | |
bdd4ddde | 2811 | writelfl((pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK) | |
fcfb1f77 | 2812 | (pp->resp_idx << EDMA_RSP_Q_PTR_SHIFT), |
cae5a29d | 2813 | port_mmio + EDMA_RSP_Q_OUT_PTR); |
1aadf5c3 | 2814 | } |
20f733e7 BR |
2815 | } |
2816 | ||
a9010329 ML |
2817 | static void mv_port_intr(struct ata_port *ap, u32 port_cause) |
2818 | { | |
2819 | struct mv_port_priv *pp; | |
2820 | int edma_was_enabled; | |
2821 | ||
a9010329 ML |
2822 | /* |
2823 | * Grab a snapshot of the EDMA_EN flag setting, | |
2824 | * so that we have a consistent view for this port, | |
2825 | * even if something we call of our routines changes it. | |
2826 | */ | |
2827 | pp = ap->private_data; | |
2828 | edma_was_enabled = (pp->pp_flags & MV_PP_FLAG_EDMA_EN); | |
2829 | /* | |
2830 | * Process completed CRPB response(s) before other events. | |
2831 | */ | |
2832 | if (edma_was_enabled && (port_cause & DONE_IRQ)) { | |
2833 | mv_process_crpb_entries(ap, pp); | |
4c299ca3 ML |
2834 | if (pp->pp_flags & MV_PP_FLAG_DELAYED_EH) |
2835 | mv_handle_fbs_ncq_dev_err(ap); | |
a9010329 ML |
2836 | } |
2837 | /* | |
2838 | * Handle chip-reported errors, or continue on to handle PIO. | |
2839 | */ | |
2840 | if (unlikely(port_cause & ERR_IRQ)) { | |
2841 | mv_err_intr(ap); | |
2842 | } else if (!edma_was_enabled) { | |
2843 | struct ata_queued_cmd *qc = mv_get_active_qc(ap); | |
2844 | if (qc) | |
c3b28894 | 2845 | ata_bmdma_port_intr(ap, qc); |
a9010329 ML |
2846 | else |
2847 | mv_unexpected_intr(ap, edma_was_enabled); | |
2848 | } | |
2849 | } | |
2850 | ||
05b308e1 BR |
2851 | /** |
2852 | * mv_host_intr - Handle all interrupts on the given host controller | |
cca3974e | 2853 | * @host: host specific structure |
7368f919 | 2854 | * @main_irq_cause: Main interrupt cause register for the chip. |
05b308e1 BR |
2855 | * |
2856 | * LOCKING: | |
2857 | * Inherited from caller. | |
2858 | */ | |
7368f919 | 2859 | static int mv_host_intr(struct ata_host *host, u32 main_irq_cause) |
20f733e7 | 2860 | { |
f351b2d6 | 2861 | struct mv_host_priv *hpriv = host->private_data; |
eabd5eb1 | 2862 | void __iomem *mmio = hpriv->base, *hc_mmio; |
a3718c1f | 2863 | unsigned int handled = 0, port; |
20f733e7 | 2864 | |
2b748a0a ML |
2865 | /* If asserted, clear the "all ports" IRQ coalescing bit */ |
2866 | if (main_irq_cause & ALL_PORTS_COAL_DONE) | |
cae5a29d | 2867 | writel(~ALL_PORTS_COAL_IRQ, mmio + IRQ_COAL_CAUSE); |
2b748a0a | 2868 | |
a3718c1f | 2869 | for (port = 0; port < hpriv->n_ports; port++) { |
cca3974e | 2870 | struct ata_port *ap = host->ports[port]; |
eabd5eb1 ML |
2871 | unsigned int p, shift, hardport, port_cause; |
2872 | ||
a3718c1f | 2873 | MV_PORT_TO_SHIFT_AND_HARDPORT(port, shift, hardport); |
a3718c1f | 2874 | /* |
eabd5eb1 ML |
2875 | * Each hc within the host has its own hc_irq_cause register, |
2876 | * where the interrupting ports bits get ack'd. | |
a3718c1f | 2877 | */ |
eabd5eb1 ML |
2878 | if (hardport == 0) { /* first port on this hc ? */ |
2879 | u32 hc_cause = (main_irq_cause >> shift) & HC0_IRQ_PEND; | |
2880 | u32 port_mask, ack_irqs; | |
2881 | /* | |
2882 | * Skip this entire hc if nothing pending for any ports | |
2883 | */ | |
2884 | if (!hc_cause) { | |
2885 | port += MV_PORTS_PER_HC - 1; | |
2886 | continue; | |
2887 | } | |
2888 | /* | |
2889 | * We don't need/want to read the hc_irq_cause register, | |
2890 | * because doing so hurts performance, and | |
2891 | * main_irq_cause already gives us everything we need. | |
2892 | * | |
2893 | * But we do have to *write* to the hc_irq_cause to ack | |
2894 | * the ports that we are handling this time through. | |
2895 | * | |
2896 | * This requires that we create a bitmap for those | |
2897 | * ports which interrupted us, and use that bitmap | |
2898 | * to ack (only) those ports via hc_irq_cause. | |
2899 | */ | |
2900 | ack_irqs = 0; | |
2b748a0a ML |
2901 | if (hc_cause & PORTS_0_3_COAL_DONE) |
2902 | ack_irqs = HC_COAL_IRQ; | |
eabd5eb1 ML |
2903 | for (p = 0; p < MV_PORTS_PER_HC; ++p) { |
2904 | if ((port + p) >= hpriv->n_ports) | |
2905 | break; | |
2906 | port_mask = (DONE_IRQ | ERR_IRQ) << (p * 2); | |
2907 | if (hc_cause & port_mask) | |
2908 | ack_irqs |= (DMA_IRQ | DEV_IRQ) << p; | |
2909 | } | |
a3718c1f | 2910 | hc_mmio = mv_hc_base_from_port(mmio, port); |
cae5a29d | 2911 | writelfl(~ack_irqs, hc_mmio + HC_IRQ_CAUSE); |
a3718c1f ML |
2912 | handled = 1; |
2913 | } | |
8f767f8a | 2914 | /* |
a9010329 | 2915 | * Handle interrupts signalled for this port: |
8f767f8a | 2916 | */ |
a9010329 ML |
2917 | port_cause = (main_irq_cause >> shift) & (DONE_IRQ | ERR_IRQ); |
2918 | if (port_cause) | |
2919 | mv_port_intr(ap, port_cause); | |
20f733e7 | 2920 | } |
a3718c1f | 2921 | return handled; |
20f733e7 BR |
2922 | } |
2923 | ||
a3718c1f | 2924 | static int mv_pci_error(struct ata_host *host, void __iomem *mmio) |
bdd4ddde | 2925 | { |
02a121da | 2926 | struct mv_host_priv *hpriv = host->private_data; |
bdd4ddde JG |
2927 | struct ata_port *ap; |
2928 | struct ata_queued_cmd *qc; | |
2929 | struct ata_eh_info *ehi; | |
2930 | unsigned int i, err_mask, printed = 0; | |
2931 | u32 err_cause; | |
2932 | ||
cae5a29d | 2933 | err_cause = readl(mmio + hpriv->irq_cause_offset); |
bdd4ddde | 2934 | |
a44fec1f | 2935 | dev_err(host->dev, "PCI ERROR; PCI IRQ cause=0x%08x\n", err_cause); |
bdd4ddde JG |
2936 | |
2937 | DPRINTK("All regs @ PCI error\n"); | |
2938 | mv_dump_all_regs(mmio, -1, to_pci_dev(host->dev)); | |
2939 | ||
cae5a29d | 2940 | writelfl(0, mmio + hpriv->irq_cause_offset); |
bdd4ddde JG |
2941 | |
2942 | for (i = 0; i < host->n_ports; i++) { | |
2943 | ap = host->ports[i]; | |
936fd732 | 2944 | if (!ata_link_offline(&ap->link)) { |
9af5c9c9 | 2945 | ehi = &ap->link.eh_info; |
bdd4ddde JG |
2946 | ata_ehi_clear_desc(ehi); |
2947 | if (!printed++) | |
2948 | ata_ehi_push_desc(ehi, | |
2949 | "PCI err cause 0x%08x", err_cause); | |
2950 | err_mask = AC_ERR_HOST_BUS; | |
cf480626 | 2951 | ehi->action = ATA_EH_RESET; |
9af5c9c9 | 2952 | qc = ata_qc_from_tag(ap, ap->link.active_tag); |
bdd4ddde JG |
2953 | if (qc) |
2954 | qc->err_mask |= err_mask; | |
2955 | else | |
2956 | ehi->err_mask |= err_mask; | |
2957 | ||
2958 | ata_port_freeze(ap); | |
2959 | } | |
2960 | } | |
a3718c1f | 2961 | return 1; /* handled */ |
bdd4ddde JG |
2962 | } |
2963 | ||
05b308e1 | 2964 | /** |
c5d3e45a | 2965 | * mv_interrupt - Main interrupt event handler |
05b308e1 BR |
2966 | * @irq: unused |
2967 | * @dev_instance: private data; in this case the host structure | |
05b308e1 BR |
2968 | * |
2969 | * Read the read only register to determine if any host | |
2970 | * controllers have pending interrupts. If so, call lower level | |
2971 | * routine to handle. Also check for PCI errors which are only | |
2972 | * reported here. | |
2973 | * | |
8b260248 | 2974 | * LOCKING: |
cca3974e | 2975 | * This routine holds the host lock while processing pending |
05b308e1 BR |
2976 | * interrupts. |
2977 | */ | |
7d12e780 | 2978 | static irqreturn_t mv_interrupt(int irq, void *dev_instance) |
20f733e7 | 2979 | { |
cca3974e | 2980 | struct ata_host *host = dev_instance; |
f351b2d6 | 2981 | struct mv_host_priv *hpriv = host->private_data; |
a3718c1f | 2982 | unsigned int handled = 0; |
6d3c30ef | 2983 | int using_msi = hpriv->hp_flags & MV_HP_FLAG_MSI; |
96e2c487 | 2984 | u32 main_irq_cause, pending_irqs; |
20f733e7 | 2985 | |
646a4da5 | 2986 | spin_lock(&host->lock); |
6d3c30ef ML |
2987 | |
2988 | /* for MSI: block new interrupts while in here */ | |
2989 | if (using_msi) | |
2b748a0a | 2990 | mv_write_main_irq_mask(0, hpriv); |
6d3c30ef | 2991 | |
7368f919 | 2992 | main_irq_cause = readl(hpriv->main_irq_cause_addr); |
96e2c487 | 2993 | pending_irqs = main_irq_cause & hpriv->main_irq_mask; |
352fab70 ML |
2994 | /* |
2995 | * Deal with cases where we either have nothing pending, or have read | |
2996 | * a bogus register value which can indicate HW removal or PCI fault. | |
20f733e7 | 2997 | */ |
a44253d2 | 2998 | if (pending_irqs && main_irq_cause != 0xffffffffU) { |
1f398472 | 2999 | if (unlikely((pending_irqs & PCI_ERR) && !IS_SOC(hpriv))) |
a3718c1f ML |
3000 | handled = mv_pci_error(host, hpriv->base); |
3001 | else | |
a44253d2 | 3002 | handled = mv_host_intr(host, pending_irqs); |
bdd4ddde | 3003 | } |
6d3c30ef ML |
3004 | |
3005 | /* for MSI: unmask; interrupt cause bits will retrigger now */ | |
3006 | if (using_msi) | |
2b748a0a | 3007 | mv_write_main_irq_mask(hpriv->main_irq_mask, hpriv); |
6d3c30ef | 3008 | |
9d51af7b ML |
3009 | spin_unlock(&host->lock); |
3010 | ||
20f733e7 BR |
3011 | return IRQ_RETVAL(handled); |
3012 | } | |
3013 | ||
c9d39130 JG |
3014 | static unsigned int mv5_scr_offset(unsigned int sc_reg_in) |
3015 | { | |
3016 | unsigned int ofs; | |
3017 | ||
3018 | switch (sc_reg_in) { | |
3019 | case SCR_STATUS: | |
3020 | case SCR_ERROR: | |
3021 | case SCR_CONTROL: | |
3022 | ofs = sc_reg_in * sizeof(u32); | |
3023 | break; | |
3024 | default: | |
3025 | ofs = 0xffffffffU; | |
3026 | break; | |
3027 | } | |
3028 | return ofs; | |
3029 | } | |
3030 | ||
82ef04fb | 3031 | static int mv5_scr_read(struct ata_link *link, unsigned int sc_reg_in, u32 *val) |
c9d39130 | 3032 | { |
82ef04fb | 3033 | struct mv_host_priv *hpriv = link->ap->host->private_data; |
f351b2d6 | 3034 | void __iomem *mmio = hpriv->base; |
82ef04fb | 3035 | void __iomem *addr = mv5_phy_base(mmio, link->ap->port_no); |
c9d39130 JG |
3036 | unsigned int ofs = mv5_scr_offset(sc_reg_in); |
3037 | ||
da3dbb17 TH |
3038 | if (ofs != 0xffffffffU) { |
3039 | *val = readl(addr + ofs); | |
3040 | return 0; | |
3041 | } else | |
3042 | return -EINVAL; | |
c9d39130 JG |
3043 | } |
3044 | ||
82ef04fb | 3045 | static int mv5_scr_write(struct ata_link *link, unsigned int sc_reg_in, u32 val) |
c9d39130 | 3046 | { |
82ef04fb | 3047 | struct mv_host_priv *hpriv = link->ap->host->private_data; |
f351b2d6 | 3048 | void __iomem *mmio = hpriv->base; |
82ef04fb | 3049 | void __iomem *addr = mv5_phy_base(mmio, link->ap->port_no); |
c9d39130 JG |
3050 | unsigned int ofs = mv5_scr_offset(sc_reg_in); |
3051 | ||
da3dbb17 | 3052 | if (ofs != 0xffffffffU) { |
0d5ff566 | 3053 | writelfl(val, addr + ofs); |
da3dbb17 TH |
3054 | return 0; |
3055 | } else | |
3056 | return -EINVAL; | |
c9d39130 JG |
3057 | } |
3058 | ||
7bb3c529 | 3059 | static void mv5_reset_bus(struct ata_host *host, void __iomem *mmio) |
522479fb | 3060 | { |
7bb3c529 | 3061 | struct pci_dev *pdev = to_pci_dev(host->dev); |
522479fb JG |
3062 | int early_5080; |
3063 | ||
44c10138 | 3064 | early_5080 = (pdev->device == 0x5080) && (pdev->revision == 0); |
522479fb JG |
3065 | |
3066 | if (!early_5080) { | |
3067 | u32 tmp = readl(mmio + MV_PCI_EXP_ROM_BAR_CTL); | |
3068 | tmp |= (1 << 0); | |
3069 | writel(tmp, mmio + MV_PCI_EXP_ROM_BAR_CTL); | |
3070 | } | |
3071 | ||
7bb3c529 | 3072 | mv_reset_pci_bus(host, mmio); |
522479fb JG |
3073 | } |
3074 | ||
3075 | static void mv5_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio) | |
3076 | { | |
cae5a29d | 3077 | writel(0x0fcfffff, mmio + FLASH_CTL); |
522479fb JG |
3078 | } |
3079 | ||
47c2b677 | 3080 | static void mv5_read_preamp(struct mv_host_priv *hpriv, int idx, |
ba3fe8fb JG |
3081 | void __iomem *mmio) |
3082 | { | |
c9d39130 JG |
3083 | void __iomem *phy_mmio = mv5_phy_base(mmio, idx); |
3084 | u32 tmp; | |
3085 | ||
3086 | tmp = readl(phy_mmio + MV5_PHY_MODE); | |
3087 | ||
3088 | hpriv->signal[idx].pre = tmp & 0x1800; /* bits 12:11 */ | |
3089 | hpriv->signal[idx].amps = tmp & 0xe0; /* bits 7:5 */ | |
ba3fe8fb JG |
3090 | } |
3091 | ||
47c2b677 | 3092 | static void mv5_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio) |
ba3fe8fb | 3093 | { |
522479fb JG |
3094 | u32 tmp; |
3095 | ||
cae5a29d | 3096 | writel(0, mmio + GPIO_PORT_CTL); |
522479fb JG |
3097 | |
3098 | /* FIXME: handle MV_HP_ERRATA_50XXB2 errata */ | |
3099 | ||
3100 | tmp = readl(mmio + MV_PCI_EXP_ROM_BAR_CTL); | |
3101 | tmp |= ~(1 << 0); | |
3102 | writel(tmp, mmio + MV_PCI_EXP_ROM_BAR_CTL); | |
ba3fe8fb JG |
3103 | } |
3104 | ||
2a47ce06 JG |
3105 | static void mv5_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, |
3106 | unsigned int port) | |
bca1c4eb | 3107 | { |
c9d39130 JG |
3108 | void __iomem *phy_mmio = mv5_phy_base(mmio, port); |
3109 | const u32 mask = (1<<12) | (1<<11) | (1<<7) | (1<<6) | (1<<5); | |
3110 | u32 tmp; | |
3111 | int fix_apm_sq = (hpriv->hp_flags & MV_HP_ERRATA_50XXB0); | |
3112 | ||
3113 | if (fix_apm_sq) { | |
cae5a29d | 3114 | tmp = readl(phy_mmio + MV5_LTMODE); |
c9d39130 | 3115 | tmp |= (1 << 19); |
cae5a29d | 3116 | writel(tmp, phy_mmio + MV5_LTMODE); |
c9d39130 | 3117 | |
cae5a29d | 3118 | tmp = readl(phy_mmio + MV5_PHY_CTL); |
c9d39130 JG |
3119 | tmp &= ~0x3; |
3120 | tmp |= 0x1; | |
cae5a29d | 3121 | writel(tmp, phy_mmio + MV5_PHY_CTL); |
c9d39130 JG |
3122 | } |
3123 | ||
3124 | tmp = readl(phy_mmio + MV5_PHY_MODE); | |
3125 | tmp &= ~mask; | |
3126 | tmp |= hpriv->signal[port].pre; | |
3127 | tmp |= hpriv->signal[port].amps; | |
3128 | writel(tmp, phy_mmio + MV5_PHY_MODE); | |
bca1c4eb JG |
3129 | } |
3130 | ||
c9d39130 JG |
3131 | |
3132 | #undef ZERO | |
3133 | #define ZERO(reg) writel(0, port_mmio + (reg)) | |
3134 | static void mv5_reset_hc_port(struct mv_host_priv *hpriv, void __iomem *mmio, | |
3135 | unsigned int port) | |
3136 | { | |
3137 | void __iomem *port_mmio = mv_port_base(mmio, port); | |
3138 | ||
e12bef50 | 3139 | mv_reset_channel(hpriv, mmio, port); |
c9d39130 JG |
3140 | |
3141 | ZERO(0x028); /* command */ | |
cae5a29d | 3142 | writel(0x11f, port_mmio + EDMA_CFG); |
c9d39130 JG |
3143 | ZERO(0x004); /* timer */ |
3144 | ZERO(0x008); /* irq err cause */ | |
3145 | ZERO(0x00c); /* irq err mask */ | |
3146 | ZERO(0x010); /* rq bah */ | |
3147 | ZERO(0x014); /* rq inp */ | |
3148 | ZERO(0x018); /* rq outp */ | |
3149 | ZERO(0x01c); /* respq bah */ | |
3150 | ZERO(0x024); /* respq outp */ | |
3151 | ZERO(0x020); /* respq inp */ | |
3152 | ZERO(0x02c); /* test control */ | |
cae5a29d | 3153 | writel(0xbc, port_mmio + EDMA_IORDY_TMOUT); |
c9d39130 JG |
3154 | } |
3155 | #undef ZERO | |
3156 | ||
3157 | #define ZERO(reg) writel(0, hc_mmio + (reg)) | |
3158 | static void mv5_reset_one_hc(struct mv_host_priv *hpriv, void __iomem *mmio, | |
3159 | unsigned int hc) | |
47c2b677 | 3160 | { |
c9d39130 JG |
3161 | void __iomem *hc_mmio = mv_hc_base(mmio, hc); |
3162 | u32 tmp; | |
3163 | ||
3164 | ZERO(0x00c); | |
3165 | ZERO(0x010); | |
3166 | ZERO(0x014); | |
3167 | ZERO(0x018); | |
3168 | ||
3169 | tmp = readl(hc_mmio + 0x20); | |
3170 | tmp &= 0x1c1c1c1c; | |
3171 | tmp |= 0x03030303; | |
3172 | writel(tmp, hc_mmio + 0x20); | |
3173 | } | |
3174 | #undef ZERO | |
3175 | ||
3176 | static int mv5_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio, | |
3177 | unsigned int n_hc) | |
3178 | { | |
3179 | unsigned int hc, port; | |
3180 | ||
3181 | for (hc = 0; hc < n_hc; hc++) { | |
3182 | for (port = 0; port < MV_PORTS_PER_HC; port++) | |
3183 | mv5_reset_hc_port(hpriv, mmio, | |
3184 | (hc * MV_PORTS_PER_HC) + port); | |
3185 | ||
3186 | mv5_reset_one_hc(hpriv, mmio, hc); | |
3187 | } | |
3188 | ||
3189 | return 0; | |
47c2b677 JG |
3190 | } |
3191 | ||
101ffae2 JG |
3192 | #undef ZERO |
3193 | #define ZERO(reg) writel(0, mmio + (reg)) | |
7bb3c529 | 3194 | static void mv_reset_pci_bus(struct ata_host *host, void __iomem *mmio) |
101ffae2 | 3195 | { |
02a121da | 3196 | struct mv_host_priv *hpriv = host->private_data; |
101ffae2 JG |
3197 | u32 tmp; |
3198 | ||
cae5a29d | 3199 | tmp = readl(mmio + MV_PCI_MODE); |
101ffae2 | 3200 | tmp &= 0xff00ffff; |
cae5a29d | 3201 | writel(tmp, mmio + MV_PCI_MODE); |
101ffae2 JG |
3202 | |
3203 | ZERO(MV_PCI_DISC_TIMER); | |
3204 | ZERO(MV_PCI_MSI_TRIGGER); | |
cae5a29d | 3205 | writel(0x000100ff, mmio + MV_PCI_XBAR_TMOUT); |
101ffae2 | 3206 | ZERO(MV_PCI_SERR_MASK); |
cae5a29d ML |
3207 | ZERO(hpriv->irq_cause_offset); |
3208 | ZERO(hpriv->irq_mask_offset); | |
101ffae2 JG |
3209 | ZERO(MV_PCI_ERR_LOW_ADDRESS); |
3210 | ZERO(MV_PCI_ERR_HIGH_ADDRESS); | |
3211 | ZERO(MV_PCI_ERR_ATTRIBUTE); | |
3212 | ZERO(MV_PCI_ERR_COMMAND); | |
3213 | } | |
3214 | #undef ZERO | |
3215 | ||
3216 | static void mv6_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio) | |
3217 | { | |
3218 | u32 tmp; | |
3219 | ||
3220 | mv5_reset_flash(hpriv, mmio); | |
3221 | ||
cae5a29d | 3222 | tmp = readl(mmio + GPIO_PORT_CTL); |
101ffae2 JG |
3223 | tmp &= 0x3; |
3224 | tmp |= (1 << 5) | (1 << 6); | |
cae5a29d | 3225 | writel(tmp, mmio + GPIO_PORT_CTL); |
101ffae2 JG |
3226 | } |
3227 | ||
3228 | /** | |
3229 | * mv6_reset_hc - Perform the 6xxx global soft reset | |
3230 | * @mmio: base address of the HBA | |
3231 | * | |
3232 | * This routine only applies to 6xxx parts. | |
3233 | * | |
3234 | * LOCKING: | |
3235 | * Inherited from caller. | |
3236 | */ | |
c9d39130 JG |
3237 | static int mv6_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio, |
3238 | unsigned int n_hc) | |
101ffae2 | 3239 | { |
cae5a29d | 3240 | void __iomem *reg = mmio + PCI_MAIN_CMD_STS; |
101ffae2 JG |
3241 | int i, rc = 0; |
3242 | u32 t; | |
3243 | ||
3244 | /* Following procedure defined in PCI "main command and status | |
3245 | * register" table. | |
3246 | */ | |
3247 | t = readl(reg); | |
3248 | writel(t | STOP_PCI_MASTER, reg); | |
3249 | ||
3250 | for (i = 0; i < 1000; i++) { | |
3251 | udelay(1); | |
3252 | t = readl(reg); | |
2dcb407e | 3253 | if (PCI_MASTER_EMPTY & t) |
101ffae2 | 3254 | break; |
101ffae2 JG |
3255 | } |
3256 | if (!(PCI_MASTER_EMPTY & t)) { | |
3257 | printk(KERN_ERR DRV_NAME ": PCI master won't flush\n"); | |
3258 | rc = 1; | |
3259 | goto done; | |
3260 | } | |
3261 | ||
3262 | /* set reset */ | |
3263 | i = 5; | |
3264 | do { | |
3265 | writel(t | GLOB_SFT_RST, reg); | |
3266 | t = readl(reg); | |
3267 | udelay(1); | |
3268 | } while (!(GLOB_SFT_RST & t) && (i-- > 0)); | |
3269 | ||
3270 | if (!(GLOB_SFT_RST & t)) { | |
3271 | printk(KERN_ERR DRV_NAME ": can't set global reset\n"); | |
3272 | rc = 1; | |
3273 | goto done; | |
3274 | } | |
3275 | ||
3276 | /* clear reset and *reenable the PCI master* (not mentioned in spec) */ | |
3277 | i = 5; | |
3278 | do { | |
3279 | writel(t & ~(GLOB_SFT_RST | STOP_PCI_MASTER), reg); | |
3280 | t = readl(reg); | |
3281 | udelay(1); | |
3282 | } while ((GLOB_SFT_RST & t) && (i-- > 0)); | |
3283 | ||
3284 | if (GLOB_SFT_RST & t) { | |
3285 | printk(KERN_ERR DRV_NAME ": can't clear global reset\n"); | |
3286 | rc = 1; | |
3287 | } | |
3288 | done: | |
3289 | return rc; | |
3290 | } | |
3291 | ||
47c2b677 | 3292 | static void mv6_read_preamp(struct mv_host_priv *hpriv, int idx, |
ba3fe8fb JG |
3293 | void __iomem *mmio) |
3294 | { | |
3295 | void __iomem *port_mmio; | |
3296 | u32 tmp; | |
3297 | ||
cae5a29d | 3298 | tmp = readl(mmio + RESET_CFG); |
ba3fe8fb | 3299 | if ((tmp & (1 << 0)) == 0) { |
47c2b677 | 3300 | hpriv->signal[idx].amps = 0x7 << 8; |
ba3fe8fb JG |
3301 | hpriv->signal[idx].pre = 0x1 << 5; |
3302 | return; | |
3303 | } | |
3304 | ||
3305 | port_mmio = mv_port_base(mmio, idx); | |
3306 | tmp = readl(port_mmio + PHY_MODE2); | |
3307 | ||
3308 | hpriv->signal[idx].amps = tmp & 0x700; /* bits 10:8 */ | |
3309 | hpriv->signal[idx].pre = tmp & 0xe0; /* bits 7:5 */ | |
3310 | } | |
3311 | ||
47c2b677 | 3312 | static void mv6_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio) |
ba3fe8fb | 3313 | { |
cae5a29d | 3314 | writel(0x00000060, mmio + GPIO_PORT_CTL); |
ba3fe8fb JG |
3315 | } |
3316 | ||
c9d39130 | 3317 | static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, |
2a47ce06 | 3318 | unsigned int port) |
bca1c4eb | 3319 | { |
c9d39130 JG |
3320 | void __iomem *port_mmio = mv_port_base(mmio, port); |
3321 | ||
bca1c4eb | 3322 | u32 hp_flags = hpriv->hp_flags; |
47c2b677 JG |
3323 | int fix_phy_mode2 = |
3324 | hp_flags & (MV_HP_ERRATA_60X1B2 | MV_HP_ERRATA_60X1C0); | |
bca1c4eb | 3325 | int fix_phy_mode4 = |
47c2b677 | 3326 | hp_flags & (MV_HP_ERRATA_60X1B2 | MV_HP_ERRATA_60X1C0); |
8c30a8b9 | 3327 | u32 m2, m3; |
47c2b677 JG |
3328 | |
3329 | if (fix_phy_mode2) { | |
3330 | m2 = readl(port_mmio + PHY_MODE2); | |
3331 | m2 &= ~(1 << 16); | |
3332 | m2 |= (1 << 31); | |
3333 | writel(m2, port_mmio + PHY_MODE2); | |
3334 | ||
3335 | udelay(200); | |
3336 | ||
3337 | m2 = readl(port_mmio + PHY_MODE2); | |
3338 | m2 &= ~((1 << 16) | (1 << 31)); | |
3339 | writel(m2, port_mmio + PHY_MODE2); | |
3340 | ||
3341 | udelay(200); | |
3342 | } | |
3343 | ||
8c30a8b9 ML |
3344 | /* |
3345 | * Gen-II/IIe PHY_MODE3 errata RM#2: | |
3346 | * Achieves better receiver noise performance than the h/w default: | |
3347 | */ | |
3348 | m3 = readl(port_mmio + PHY_MODE3); | |
3349 | m3 = (m3 & 0x1f) | (0x5555601 << 5); | |
bca1c4eb | 3350 | |
0388a8c0 ML |
3351 | /* Guideline 88F5182 (GL# SATA-S11) */ |
3352 | if (IS_SOC(hpriv)) | |
3353 | m3 &= ~0x1c; | |
3354 | ||
bca1c4eb | 3355 | if (fix_phy_mode4) { |
ba069e37 ML |
3356 | u32 m4 = readl(port_mmio + PHY_MODE4); |
3357 | /* | |
3358 | * Enforce reserved-bit restrictions on GenIIe devices only. | |
3359 | * For earlier chipsets, force only the internal config field | |
3360 | * (workaround for errata FEr SATA#10 part 1). | |
3361 | */ | |
8c30a8b9 | 3362 | if (IS_GEN_IIE(hpriv)) |
ba069e37 ML |
3363 | m4 = (m4 & ~PHY_MODE4_RSVD_ZEROS) | PHY_MODE4_RSVD_ONES; |
3364 | else | |
3365 | m4 = (m4 & ~PHY_MODE4_CFG_MASK) | PHY_MODE4_CFG_VALUE; | |
8c30a8b9 | 3366 | writel(m4, port_mmio + PHY_MODE4); |
bca1c4eb | 3367 | } |
b406c7a6 ML |
3368 | /* |
3369 | * Workaround for 60x1-B2 errata SATA#13: | |
3370 | * Any write to PHY_MODE4 (above) may corrupt PHY_MODE3, | |
3371 | * so we must always rewrite PHY_MODE3 after PHY_MODE4. | |
ba68460b | 3372 | * Or ensure we use writelfl() when writing PHY_MODE4. |
b406c7a6 ML |
3373 | */ |
3374 | writel(m3, port_mmio + PHY_MODE3); | |
bca1c4eb JG |
3375 | |
3376 | /* Revert values of pre-emphasis and signal amps to the saved ones */ | |
3377 | m2 = readl(port_mmio + PHY_MODE2); | |
3378 | ||
3379 | m2 &= ~MV_M2_PREAMP_MASK; | |
2a47ce06 JG |
3380 | m2 |= hpriv->signal[port].amps; |
3381 | m2 |= hpriv->signal[port].pre; | |
47c2b677 | 3382 | m2 &= ~(1 << 16); |
bca1c4eb | 3383 | |
e4e7b892 JG |
3384 | /* according to mvSata 3.6.1, some IIE values are fixed */ |
3385 | if (IS_GEN_IIE(hpriv)) { | |
3386 | m2 &= ~0xC30FF01F; | |
3387 | m2 |= 0x0000900F; | |
3388 | } | |
3389 | ||
bca1c4eb JG |
3390 | writel(m2, port_mmio + PHY_MODE2); |
3391 | } | |
3392 | ||
f351b2d6 SB |
3393 | /* TODO: use the generic LED interface to configure the SATA Presence */ |
3394 | /* & Acitivy LEDs on the board */ | |
3395 | static void mv_soc_enable_leds(struct mv_host_priv *hpriv, | |
3396 | void __iomem *mmio) | |
3397 | { | |
3398 | return; | |
3399 | } | |
3400 | ||
3401 | static void mv_soc_read_preamp(struct mv_host_priv *hpriv, int idx, | |
3402 | void __iomem *mmio) | |
3403 | { | |
3404 | void __iomem *port_mmio; | |
3405 | u32 tmp; | |
3406 | ||
3407 | port_mmio = mv_port_base(mmio, idx); | |
3408 | tmp = readl(port_mmio + PHY_MODE2); | |
3409 | ||
3410 | hpriv->signal[idx].amps = tmp & 0x700; /* bits 10:8 */ | |
3411 | hpriv->signal[idx].pre = tmp & 0xe0; /* bits 7:5 */ | |
3412 | } | |
3413 | ||
3414 | #undef ZERO | |
3415 | #define ZERO(reg) writel(0, port_mmio + (reg)) | |
3416 | static void mv_soc_reset_hc_port(struct mv_host_priv *hpriv, | |
3417 | void __iomem *mmio, unsigned int port) | |
3418 | { | |
3419 | void __iomem *port_mmio = mv_port_base(mmio, port); | |
3420 | ||
e12bef50 | 3421 | mv_reset_channel(hpriv, mmio, port); |
f351b2d6 SB |
3422 | |
3423 | ZERO(0x028); /* command */ | |
cae5a29d | 3424 | writel(0x101f, port_mmio + EDMA_CFG); |
f351b2d6 SB |
3425 | ZERO(0x004); /* timer */ |
3426 | ZERO(0x008); /* irq err cause */ | |
3427 | ZERO(0x00c); /* irq err mask */ | |
3428 | ZERO(0x010); /* rq bah */ | |
3429 | ZERO(0x014); /* rq inp */ | |
3430 | ZERO(0x018); /* rq outp */ | |
3431 | ZERO(0x01c); /* respq bah */ | |
3432 | ZERO(0x024); /* respq outp */ | |
3433 | ZERO(0x020); /* respq inp */ | |
3434 | ZERO(0x02c); /* test control */ | |
d7b0c143 | 3435 | writel(0x800, port_mmio + EDMA_IORDY_TMOUT); |
f351b2d6 SB |
3436 | } |
3437 | ||
3438 | #undef ZERO | |
3439 | ||
3440 | #define ZERO(reg) writel(0, hc_mmio + (reg)) | |
3441 | static void mv_soc_reset_one_hc(struct mv_host_priv *hpriv, | |
3442 | void __iomem *mmio) | |
3443 | { | |
3444 | void __iomem *hc_mmio = mv_hc_base(mmio, 0); | |
3445 | ||
3446 | ZERO(0x00c); | |
3447 | ZERO(0x010); | |
3448 | ZERO(0x014); | |
3449 | ||
3450 | } | |
3451 | ||
3452 | #undef ZERO | |
3453 | ||
3454 | static int mv_soc_reset_hc(struct mv_host_priv *hpriv, | |
3455 | void __iomem *mmio, unsigned int n_hc) | |
3456 | { | |
3457 | unsigned int port; | |
3458 | ||
3459 | for (port = 0; port < hpriv->n_ports; port++) | |
3460 | mv_soc_reset_hc_port(hpriv, mmio, port); | |
3461 | ||
3462 | mv_soc_reset_one_hc(hpriv, mmio); | |
3463 | ||
3464 | return 0; | |
3465 | } | |
3466 | ||
3467 | static void mv_soc_reset_flash(struct mv_host_priv *hpriv, | |
3468 | void __iomem *mmio) | |
3469 | { | |
3470 | return; | |
3471 | } | |
3472 | ||
3473 | static void mv_soc_reset_bus(struct ata_host *host, void __iomem *mmio) | |
3474 | { | |
3475 | return; | |
3476 | } | |
3477 | ||
29b7e43c MM |
3478 | static void mv_soc_65n_phy_errata(struct mv_host_priv *hpriv, |
3479 | void __iomem *mmio, unsigned int port) | |
3480 | { | |
3481 | void __iomem *port_mmio = mv_port_base(mmio, port); | |
3482 | u32 reg; | |
3483 | ||
3484 | reg = readl(port_mmio + PHY_MODE3); | |
3485 | reg &= ~(0x3 << 27); /* SELMUPF (bits 28:27) to 1 */ | |
3486 | reg |= (0x1 << 27); | |
3487 | reg &= ~(0x3 << 29); /* SELMUPI (bits 30:29) to 1 */ | |
3488 | reg |= (0x1 << 29); | |
3489 | writel(reg, port_mmio + PHY_MODE3); | |
3490 | ||
3491 | reg = readl(port_mmio + PHY_MODE4); | |
3492 | reg &= ~0x1; /* SATU_OD8 (bit 0) to 0, reserved bit 16 must be set */ | |
3493 | reg |= (0x1 << 16); | |
3494 | writel(reg, port_mmio + PHY_MODE4); | |
3495 | ||
3496 | reg = readl(port_mmio + PHY_MODE9_GEN2); | |
3497 | reg &= ~0xf; /* TXAMP[3:0] (bits 3:0) to 8 */ | |
3498 | reg |= 0x8; | |
3499 | reg &= ~(0x1 << 14); /* TXAMP[4] (bit 14) to 0 */ | |
3500 | writel(reg, port_mmio + PHY_MODE9_GEN2); | |
3501 | ||
3502 | reg = readl(port_mmio + PHY_MODE9_GEN1); | |
3503 | reg &= ~0xf; /* TXAMP[3:0] (bits 3:0) to 8 */ | |
3504 | reg |= 0x8; | |
3505 | reg &= ~(0x1 << 14); /* TXAMP[4] (bit 14) to 0 */ | |
3506 | writel(reg, port_mmio + PHY_MODE9_GEN1); | |
3507 | } | |
3508 | ||
3509 | /** | |
3510 | * soc_is_65 - check if the soc is 65 nano device | |
3511 | * | |
3512 | * Detect the type of the SoC, this is done by reading the PHYCFG_OFS | |
3513 | * register, this register should contain non-zero value and it exists only | |
3514 | * in the 65 nano devices, when reading it from older devices we get 0. | |
3515 | */ | |
3516 | static bool soc_is_65n(struct mv_host_priv *hpriv) | |
3517 | { | |
3518 | void __iomem *port0_mmio = mv_port_base(hpriv->base, 0); | |
3519 | ||
3520 | if (readl(port0_mmio + PHYCFG_OFS)) | |
3521 | return true; | |
3522 | return false; | |
3523 | } | |
3524 | ||
8e7decdb | 3525 | static void mv_setup_ifcfg(void __iomem *port_mmio, int want_gen2i) |
b67a1064 | 3526 | { |
cae5a29d | 3527 | u32 ifcfg = readl(port_mmio + SATA_IFCFG); |
b67a1064 | 3528 | |
8e7decdb | 3529 | ifcfg = (ifcfg & 0xf7f) | 0x9b1000; /* from chip spec */ |
b67a1064 | 3530 | if (want_gen2i) |
8e7decdb | 3531 | ifcfg |= (1 << 7); /* enable gen2i speed */ |
cae5a29d | 3532 | writelfl(ifcfg, port_mmio + SATA_IFCFG); |
b67a1064 ML |
3533 | } |
3534 | ||
e12bef50 | 3535 | static void mv_reset_channel(struct mv_host_priv *hpriv, void __iomem *mmio, |
c9d39130 JG |
3536 | unsigned int port_no) |
3537 | { | |
3538 | void __iomem *port_mmio = mv_port_base(mmio, port_no); | |
3539 | ||
8e7decdb ML |
3540 | /* |
3541 | * The datasheet warns against setting EDMA_RESET when EDMA is active | |
3542 | * (but doesn't say what the problem might be). So we first try | |
3543 | * to disable the EDMA engine before doing the EDMA_RESET operation. | |
3544 | */ | |
0d8be5cb | 3545 | mv_stop_edma_engine(port_mmio); |
cae5a29d | 3546 | writelfl(EDMA_RESET, port_mmio + EDMA_CMD); |
c9d39130 | 3547 | |
b67a1064 | 3548 | if (!IS_GEN_I(hpriv)) { |
8e7decdb ML |
3549 | /* Enable 3.0gb/s link speed: this survives EDMA_RESET */ |
3550 | mv_setup_ifcfg(port_mmio, 1); | |
c9d39130 | 3551 | } |
b67a1064 | 3552 | /* |
8e7decdb | 3553 | * Strobing EDMA_RESET here causes a hard reset of the SATA transport, |
b67a1064 | 3554 | * link, and physical layers. It resets all SATA interface registers |
cae5a29d | 3555 | * (except for SATA_IFCFG), and issues a COMRESET to the dev. |
c9d39130 | 3556 | */ |
cae5a29d | 3557 | writelfl(EDMA_RESET, port_mmio + EDMA_CMD); |
b67a1064 | 3558 | udelay(25); /* allow reset propagation */ |
cae5a29d | 3559 | writelfl(0, port_mmio + EDMA_CMD); |
c9d39130 JG |
3560 | |
3561 | hpriv->ops->phy_errata(hpriv, mmio, port_no); | |
3562 | ||
ee9ccdf7 | 3563 | if (IS_GEN_I(hpriv)) |
c9d39130 JG |
3564 | mdelay(1); |
3565 | } | |
3566 | ||
e49856d8 | 3567 | static void mv_pmp_select(struct ata_port *ap, int pmp) |
20f733e7 | 3568 | { |
e49856d8 ML |
3569 | if (sata_pmp_supported(ap)) { |
3570 | void __iomem *port_mmio = mv_ap_base(ap); | |
cae5a29d | 3571 | u32 reg = readl(port_mmio + SATA_IFCTL); |
e49856d8 | 3572 | int old = reg & 0xf; |
22374677 | 3573 | |
e49856d8 ML |
3574 | if (old != pmp) { |
3575 | reg = (reg & ~0xf) | pmp; | |
cae5a29d | 3576 | writelfl(reg, port_mmio + SATA_IFCTL); |
e49856d8 | 3577 | } |
22374677 | 3578 | } |
20f733e7 BR |
3579 | } |
3580 | ||
e49856d8 ML |
3581 | static int mv_pmp_hardreset(struct ata_link *link, unsigned int *class, |
3582 | unsigned long deadline) | |
22374677 | 3583 | { |
e49856d8 ML |
3584 | mv_pmp_select(link->ap, sata_srst_pmp(link)); |
3585 | return sata_std_hardreset(link, class, deadline); | |
3586 | } | |
bdd4ddde | 3587 | |
e49856d8 ML |
3588 | static int mv_softreset(struct ata_link *link, unsigned int *class, |
3589 | unsigned long deadline) | |
3590 | { | |
3591 | mv_pmp_select(link->ap, sata_srst_pmp(link)); | |
3592 | return ata_sff_softreset(link, class, deadline); | |
22374677 JG |
3593 | } |
3594 | ||
cc0680a5 | 3595 | static int mv_hardreset(struct ata_link *link, unsigned int *class, |
bdd4ddde | 3596 | unsigned long deadline) |
31961943 | 3597 | { |
cc0680a5 | 3598 | struct ata_port *ap = link->ap; |
bdd4ddde | 3599 | struct mv_host_priv *hpriv = ap->host->private_data; |
b562468c | 3600 | struct mv_port_priv *pp = ap->private_data; |
f351b2d6 | 3601 | void __iomem *mmio = hpriv->base; |
0d8be5cb ML |
3602 | int rc, attempts = 0, extra = 0; |
3603 | u32 sstatus; | |
3604 | bool online; | |
31961943 | 3605 | |
e12bef50 | 3606 | mv_reset_channel(hpriv, mmio, ap->port_no); |
b562468c | 3607 | pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN; |
d16ab3f6 ML |
3608 | pp->pp_flags &= |
3609 | ~(MV_PP_FLAG_FBS_EN | MV_PP_FLAG_NCQ_EN | MV_PP_FLAG_FAKE_ATA_BUSY); | |
bdd4ddde | 3610 | |
0d8be5cb ML |
3611 | /* Workaround for errata FEr SATA#10 (part 2) */ |
3612 | do { | |
17c5aab5 ML |
3613 | const unsigned long *timing = |
3614 | sata_ehc_deb_timing(&link->eh_context); | |
bdd4ddde | 3615 | |
17c5aab5 ML |
3616 | rc = sata_link_hardreset(link, timing, deadline + extra, |
3617 | &online, NULL); | |
9dcffd99 | 3618 | rc = online ? -EAGAIN : rc; |
17c5aab5 | 3619 | if (rc) |
0d8be5cb | 3620 | return rc; |
0d8be5cb ML |
3621 | sata_scr_read(link, SCR_STATUS, &sstatus); |
3622 | if (!IS_GEN_I(hpriv) && ++attempts >= 5 && sstatus == 0x121) { | |
3623 | /* Force 1.5gb/s link speed and try again */ | |
8e7decdb | 3624 | mv_setup_ifcfg(mv_ap_base(ap), 0); |
0d8be5cb ML |
3625 | if (time_after(jiffies + HZ, deadline)) |
3626 | extra = HZ; /* only extend it once, max */ | |
3627 | } | |
3628 | } while (sstatus != 0x0 && sstatus != 0x113 && sstatus != 0x123); | |
08da1759 | 3629 | mv_save_cached_regs(ap); |
66e57a2c | 3630 | mv_edma_cfg(ap, 0, 0); |
bdd4ddde | 3631 | |
17c5aab5 | 3632 | return rc; |
bdd4ddde JG |
3633 | } |
3634 | ||
bdd4ddde JG |
3635 | static void mv_eh_freeze(struct ata_port *ap) |
3636 | { | |
1cfd19ae | 3637 | mv_stop_edma(ap); |
c4de573b | 3638 | mv_enable_port_irqs(ap, 0); |
bdd4ddde JG |
3639 | } |
3640 | ||
3641 | static void mv_eh_thaw(struct ata_port *ap) | |
3642 | { | |
f351b2d6 | 3643 | struct mv_host_priv *hpriv = ap->host->private_data; |
c4de573b ML |
3644 | unsigned int port = ap->port_no; |
3645 | unsigned int hardport = mv_hardport_from_port(port); | |
1cfd19ae | 3646 | void __iomem *hc_mmio = mv_hc_base_from_port(hpriv->base, port); |
bdd4ddde | 3647 | void __iomem *port_mmio = mv_ap_base(ap); |
c4de573b | 3648 | u32 hc_irq_cause; |
bdd4ddde | 3649 | |
bdd4ddde | 3650 | /* clear EDMA errors on this port */ |
cae5a29d | 3651 | writel(0, port_mmio + EDMA_ERR_IRQ_CAUSE); |
bdd4ddde JG |
3652 | |
3653 | /* clear pending irq events */ | |
cae6edc3 | 3654 | hc_irq_cause = ~((DEV_IRQ | DMA_IRQ) << hardport); |
cae5a29d | 3655 | writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE); |
bdd4ddde | 3656 | |
88e675e1 | 3657 | mv_enable_port_irqs(ap, ERR_IRQ); |
31961943 BR |
3658 | } |
3659 | ||
05b308e1 BR |
3660 | /** |
3661 | * mv_port_init - Perform some early initialization on a single port. | |
3662 | * @port: libata data structure storing shadow register addresses | |
3663 | * @port_mmio: base address of the port | |
3664 | * | |
3665 | * Initialize shadow register mmio addresses, clear outstanding | |
3666 | * interrupts on the port, and unmask interrupts for the future | |
3667 | * start of the port. | |
3668 | * | |
3669 | * LOCKING: | |
3670 | * Inherited from caller. | |
3671 | */ | |
31961943 | 3672 | static void mv_port_init(struct ata_ioports *port, void __iomem *port_mmio) |
20f733e7 | 3673 | { |
cae5a29d | 3674 | void __iomem *serr, *shd_base = port_mmio + SHD_BLK; |
31961943 | 3675 | |
8b260248 | 3676 | /* PIO related setup |
31961943 BR |
3677 | */ |
3678 | port->data_addr = shd_base + (sizeof(u32) * ATA_REG_DATA); | |
8b260248 | 3679 | port->error_addr = |
31961943 BR |
3680 | port->feature_addr = shd_base + (sizeof(u32) * ATA_REG_ERR); |
3681 | port->nsect_addr = shd_base + (sizeof(u32) * ATA_REG_NSECT); | |
3682 | port->lbal_addr = shd_base + (sizeof(u32) * ATA_REG_LBAL); | |
3683 | port->lbam_addr = shd_base + (sizeof(u32) * ATA_REG_LBAM); | |
3684 | port->lbah_addr = shd_base + (sizeof(u32) * ATA_REG_LBAH); | |
3685 | port->device_addr = shd_base + (sizeof(u32) * ATA_REG_DEVICE); | |
8b260248 | 3686 | port->status_addr = |
31961943 BR |
3687 | port->command_addr = shd_base + (sizeof(u32) * ATA_REG_STATUS); |
3688 | /* special case: control/altstatus doesn't have ATA_REG_ address */ | |
cae5a29d | 3689 | port->altstatus_addr = port->ctl_addr = shd_base + SHD_CTL_AST; |
31961943 | 3690 | |
31961943 | 3691 | /* Clear any currently outstanding port interrupt conditions */ |
cae5a29d ML |
3692 | serr = port_mmio + mv_scr_offset(SCR_ERROR); |
3693 | writelfl(readl(serr), serr); | |
3694 | writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE); | |
31961943 | 3695 | |
646a4da5 | 3696 | /* unmask all non-transient EDMA error interrupts */ |
cae5a29d | 3697 | writelfl(~EDMA_ERR_IRQ_TRANSIENT, port_mmio + EDMA_ERR_IRQ_MASK); |
20f733e7 | 3698 | |
8b260248 | 3699 | VPRINTK("EDMA cfg=0x%08x EDMA IRQ err cause/mask=0x%08x/0x%08x\n", |
cae5a29d ML |
3700 | readl(port_mmio + EDMA_CFG), |
3701 | readl(port_mmio + EDMA_ERR_IRQ_CAUSE), | |
3702 | readl(port_mmio + EDMA_ERR_IRQ_MASK)); | |
20f733e7 BR |
3703 | } |
3704 | ||
616d4a98 ML |
3705 | static unsigned int mv_in_pcix_mode(struct ata_host *host) |
3706 | { | |
3707 | struct mv_host_priv *hpriv = host->private_data; | |
3708 | void __iomem *mmio = hpriv->base; | |
3709 | u32 reg; | |
3710 | ||
1f398472 | 3711 | if (IS_SOC(hpriv) || !IS_PCIE(hpriv)) |
616d4a98 | 3712 | return 0; /* not PCI-X capable */ |
cae5a29d | 3713 | reg = readl(mmio + MV_PCI_MODE); |
616d4a98 ML |
3714 | if ((reg & MV_PCI_MODE_MASK) == 0) |
3715 | return 0; /* conventional PCI mode */ | |
3716 | return 1; /* chip is in PCI-X mode */ | |
3717 | } | |
3718 | ||
3719 | static int mv_pci_cut_through_okay(struct ata_host *host) | |
3720 | { | |
3721 | struct mv_host_priv *hpriv = host->private_data; | |
3722 | void __iomem *mmio = hpriv->base; | |
3723 | u32 reg; | |
3724 | ||
3725 | if (!mv_in_pcix_mode(host)) { | |
cae5a29d ML |
3726 | reg = readl(mmio + MV_PCI_COMMAND); |
3727 | if (reg & MV_PCI_COMMAND_MRDTRIG) | |
616d4a98 ML |
3728 | return 0; /* not okay */ |
3729 | } | |
3730 | return 1; /* okay */ | |
3731 | } | |
3732 | ||
65ad7fef ML |
3733 | static void mv_60x1b2_errata_pci7(struct ata_host *host) |
3734 | { | |
3735 | struct mv_host_priv *hpriv = host->private_data; | |
3736 | void __iomem *mmio = hpriv->base; | |
3737 | ||
3738 | /* workaround for 60x1-B2 errata PCI#7 */ | |
3739 | if (mv_in_pcix_mode(host)) { | |
cae5a29d ML |
3740 | u32 reg = readl(mmio + MV_PCI_COMMAND); |
3741 | writelfl(reg & ~MV_PCI_COMMAND_MWRCOM, mmio + MV_PCI_COMMAND); | |
65ad7fef ML |
3742 | } |
3743 | } | |
3744 | ||
4447d351 | 3745 | static int mv_chip_id(struct ata_host *host, unsigned int board_idx) |
bca1c4eb | 3746 | { |
4447d351 TH |
3747 | struct pci_dev *pdev = to_pci_dev(host->dev); |
3748 | struct mv_host_priv *hpriv = host->private_data; | |
bca1c4eb JG |
3749 | u32 hp_flags = hpriv->hp_flags; |
3750 | ||
5796d1c4 | 3751 | switch (board_idx) { |
47c2b677 JG |
3752 | case chip_5080: |
3753 | hpriv->ops = &mv5xxx_ops; | |
ee9ccdf7 | 3754 | hp_flags |= MV_HP_GEN_I; |
47c2b677 | 3755 | |
44c10138 | 3756 | switch (pdev->revision) { |
47c2b677 JG |
3757 | case 0x1: |
3758 | hp_flags |= MV_HP_ERRATA_50XXB0; | |
3759 | break; | |
3760 | case 0x3: | |
3761 | hp_flags |= MV_HP_ERRATA_50XXB2; | |
3762 | break; | |
3763 | default: | |
a44fec1f JP |
3764 | dev_warn(&pdev->dev, |
3765 | "Applying 50XXB2 workarounds to unknown rev\n"); | |
47c2b677 JG |
3766 | hp_flags |= MV_HP_ERRATA_50XXB2; |
3767 | break; | |
3768 | } | |
3769 | break; | |
3770 | ||
bca1c4eb JG |
3771 | case chip_504x: |
3772 | case chip_508x: | |
47c2b677 | 3773 | hpriv->ops = &mv5xxx_ops; |
ee9ccdf7 | 3774 | hp_flags |= MV_HP_GEN_I; |
bca1c4eb | 3775 | |
44c10138 | 3776 | switch (pdev->revision) { |
47c2b677 JG |
3777 | case 0x0: |
3778 | hp_flags |= MV_HP_ERRATA_50XXB0; | |
3779 | break; | |
3780 | case 0x3: | |
3781 | hp_flags |= MV_HP_ERRATA_50XXB2; | |
3782 | break; | |
3783 | default: | |
a44fec1f JP |
3784 | dev_warn(&pdev->dev, |
3785 | "Applying B2 workarounds to unknown rev\n"); | |
47c2b677 JG |
3786 | hp_flags |= MV_HP_ERRATA_50XXB2; |
3787 | break; | |
bca1c4eb JG |
3788 | } |
3789 | break; | |
3790 | ||
3791 | case chip_604x: | |
3792 | case chip_608x: | |
47c2b677 | 3793 | hpriv->ops = &mv6xxx_ops; |
ee9ccdf7 | 3794 | hp_flags |= MV_HP_GEN_II; |
47c2b677 | 3795 | |
44c10138 | 3796 | switch (pdev->revision) { |
47c2b677 | 3797 | case 0x7: |
65ad7fef | 3798 | mv_60x1b2_errata_pci7(host); |
47c2b677 JG |
3799 | hp_flags |= MV_HP_ERRATA_60X1B2; |
3800 | break; | |
3801 | case 0x9: | |
3802 | hp_flags |= MV_HP_ERRATA_60X1C0; | |
bca1c4eb JG |
3803 | break; |
3804 | default: | |
a44fec1f JP |
3805 | dev_warn(&pdev->dev, |
3806 | "Applying B2 workarounds to unknown rev\n"); | |
47c2b677 | 3807 | hp_flags |= MV_HP_ERRATA_60X1B2; |
bca1c4eb JG |
3808 | break; |
3809 | } | |
3810 | break; | |
3811 | ||
e4e7b892 | 3812 | case chip_7042: |
616d4a98 | 3813 | hp_flags |= MV_HP_PCIE | MV_HP_CUT_THROUGH; |
306b30f7 ML |
3814 | if (pdev->vendor == PCI_VENDOR_ID_TTI && |
3815 | (pdev->device == 0x2300 || pdev->device == 0x2310)) | |
3816 | { | |
4e520033 ML |
3817 | /* |
3818 | * Highpoint RocketRAID PCIe 23xx series cards: | |
3819 | * | |
3820 | * Unconfigured drives are treated as "Legacy" | |
3821 | * by the BIOS, and it overwrites sector 8 with | |
3822 | * a "Lgcy" metadata block prior to Linux boot. | |
3823 | * | |
3824 | * Configured drives (RAID or JBOD) leave sector 8 | |
3825 | * alone, but instead overwrite a high numbered | |
3826 | * sector for the RAID metadata. This sector can | |
3827 | * be determined exactly, by truncating the physical | |
3828 | * drive capacity to a nice even GB value. | |
3829 | * | |
3830 | * RAID metadata is at: (dev->n_sectors & ~0xfffff) | |
3831 | * | |
3832 | * Warn the user, lest they think we're just buggy. | |
3833 | */ | |
3834 | printk(KERN_WARNING DRV_NAME ": Highpoint RocketRAID" | |
3835 | " BIOS CORRUPTS DATA on all attached drives," | |
3836 | " regardless of if/how they are configured." | |
3837 | " BEWARE!\n"); | |
3838 | printk(KERN_WARNING DRV_NAME ": For data safety, do not" | |
3839 | " use sectors 8-9 on \"Legacy\" drives," | |
3840 | " and avoid the final two gigabytes on" | |
3841 | " all RocketRAID BIOS initialized drives.\n"); | |
306b30f7 | 3842 | } |
8e7decdb | 3843 | /* drop through */ |
e4e7b892 JG |
3844 | case chip_6042: |
3845 | hpriv->ops = &mv6xxx_ops; | |
e4e7b892 | 3846 | hp_flags |= MV_HP_GEN_IIE; |
616d4a98 ML |
3847 | if (board_idx == chip_6042 && mv_pci_cut_through_okay(host)) |
3848 | hp_flags |= MV_HP_CUT_THROUGH; | |
e4e7b892 | 3849 | |
44c10138 | 3850 | switch (pdev->revision) { |
5cf73bfb | 3851 | case 0x2: /* Rev.B0: the first/only public release */ |
e4e7b892 JG |
3852 | hp_flags |= MV_HP_ERRATA_60X1C0; |
3853 | break; | |
3854 | default: | |
a44fec1f JP |
3855 | dev_warn(&pdev->dev, |
3856 | "Applying 60X1C0 workarounds to unknown rev\n"); | |
e4e7b892 JG |
3857 | hp_flags |= MV_HP_ERRATA_60X1C0; |
3858 | break; | |
3859 | } | |
3860 | break; | |
f351b2d6 | 3861 | case chip_soc: |
29b7e43c MM |
3862 | if (soc_is_65n(hpriv)) |
3863 | hpriv->ops = &mv_soc_65n_ops; | |
3864 | else | |
3865 | hpriv->ops = &mv_soc_ops; | |
eb3a55a9 SB |
3866 | hp_flags |= MV_HP_FLAG_SOC | MV_HP_GEN_IIE | |
3867 | MV_HP_ERRATA_60X1C0; | |
f351b2d6 | 3868 | break; |
e4e7b892 | 3869 | |
bca1c4eb | 3870 | default: |
a44fec1f | 3871 | dev_err(host->dev, "BUG: invalid board index %u\n", board_idx); |
bca1c4eb JG |
3872 | return 1; |
3873 | } | |
3874 | ||
3875 | hpriv->hp_flags = hp_flags; | |
02a121da | 3876 | if (hp_flags & MV_HP_PCIE) { |
cae5a29d ML |
3877 | hpriv->irq_cause_offset = PCIE_IRQ_CAUSE; |
3878 | hpriv->irq_mask_offset = PCIE_IRQ_MASK; | |
02a121da ML |
3879 | hpriv->unmask_all_irqs = PCIE_UNMASK_ALL_IRQS; |
3880 | } else { | |
cae5a29d ML |
3881 | hpriv->irq_cause_offset = PCI_IRQ_CAUSE; |
3882 | hpriv->irq_mask_offset = PCI_IRQ_MASK; | |
02a121da ML |
3883 | hpriv->unmask_all_irqs = PCI_UNMASK_ALL_IRQS; |
3884 | } | |
bca1c4eb JG |
3885 | |
3886 | return 0; | |
3887 | } | |
3888 | ||
05b308e1 | 3889 | /** |
47c2b677 | 3890 | * mv_init_host - Perform some early initialization of the host. |
4447d351 | 3891 | * @host: ATA host to initialize |
05b308e1 BR |
3892 | * |
3893 | * If possible, do an early global reset of the host. Then do | |
3894 | * our port init and clear/unmask all/relevant host interrupts. | |
3895 | * | |
3896 | * LOCKING: | |
3897 | * Inherited from caller. | |
3898 | */ | |
1bfeff03 | 3899 | static int mv_init_host(struct ata_host *host) |
20f733e7 BR |
3900 | { |
3901 | int rc = 0, n_hc, port, hc; | |
4447d351 | 3902 | struct mv_host_priv *hpriv = host->private_data; |
f351b2d6 | 3903 | void __iomem *mmio = hpriv->base; |
47c2b677 | 3904 | |
1bfeff03 | 3905 | rc = mv_chip_id(host, hpriv->board_idx); |
bca1c4eb | 3906 | if (rc) |
352fab70 | 3907 | goto done; |
f351b2d6 | 3908 | |
1f398472 | 3909 | if (IS_SOC(hpriv)) { |
cae5a29d ML |
3910 | hpriv->main_irq_cause_addr = mmio + SOC_HC_MAIN_IRQ_CAUSE; |
3911 | hpriv->main_irq_mask_addr = mmio + SOC_HC_MAIN_IRQ_MASK; | |
1f398472 | 3912 | } else { |
cae5a29d ML |
3913 | hpriv->main_irq_cause_addr = mmio + PCI_HC_MAIN_IRQ_CAUSE; |
3914 | hpriv->main_irq_mask_addr = mmio + PCI_HC_MAIN_IRQ_MASK; | |
f351b2d6 | 3915 | } |
352fab70 | 3916 | |
5d0fb2e7 TR |
3917 | /* initialize shadow irq mask with register's value */ |
3918 | hpriv->main_irq_mask = readl(hpriv->main_irq_mask_addr); | |
3919 | ||
352fab70 | 3920 | /* global interrupt mask: 0 == mask everything */ |
c4de573b | 3921 | mv_set_main_irq_mask(host, ~0, 0); |
bca1c4eb | 3922 | |
4447d351 | 3923 | n_hc = mv_get_hc_count(host->ports[0]->flags); |
bca1c4eb | 3924 | |
4447d351 | 3925 | for (port = 0; port < host->n_ports; port++) |
29b7e43c MM |
3926 | if (hpriv->ops->read_preamp) |
3927 | hpriv->ops->read_preamp(hpriv, port, mmio); | |
20f733e7 | 3928 | |
c9d39130 | 3929 | rc = hpriv->ops->reset_hc(hpriv, mmio, n_hc); |
47c2b677 | 3930 | if (rc) |
20f733e7 | 3931 | goto done; |
20f733e7 | 3932 | |
522479fb | 3933 | hpriv->ops->reset_flash(hpriv, mmio); |
7bb3c529 | 3934 | hpriv->ops->reset_bus(host, mmio); |
47c2b677 | 3935 | hpriv->ops->enable_leds(hpriv, mmio); |
20f733e7 | 3936 | |
4447d351 | 3937 | for (port = 0; port < host->n_ports; port++) { |
cbcdd875 | 3938 | struct ata_port *ap = host->ports[port]; |
2a47ce06 | 3939 | void __iomem *port_mmio = mv_port_base(mmio, port); |
cbcdd875 TH |
3940 | |
3941 | mv_port_init(&ap->ioaddr, port_mmio); | |
20f733e7 BR |
3942 | } |
3943 | ||
3944 | for (hc = 0; hc < n_hc; hc++) { | |
31961943 BR |
3945 | void __iomem *hc_mmio = mv_hc_base(mmio, hc); |
3946 | ||
3947 | VPRINTK("HC%i: HC config=0x%08x HC IRQ cause " | |
3948 | "(before clear)=0x%08x\n", hc, | |
cae5a29d ML |
3949 | readl(hc_mmio + HC_CFG), |
3950 | readl(hc_mmio + HC_IRQ_CAUSE)); | |
31961943 BR |
3951 | |
3952 | /* Clear any currently outstanding hc interrupt conditions */ | |
cae5a29d | 3953 | writelfl(0, hc_mmio + HC_IRQ_CAUSE); |
20f733e7 BR |
3954 | } |
3955 | ||
44c65d16 ML |
3956 | if (!IS_SOC(hpriv)) { |
3957 | /* Clear any currently outstanding host interrupt conditions */ | |
cae5a29d | 3958 | writelfl(0, mmio + hpriv->irq_cause_offset); |
31961943 | 3959 | |
44c65d16 | 3960 | /* and unmask interrupt generation for host regs */ |
cae5a29d | 3961 | writelfl(hpriv->unmask_all_irqs, mmio + hpriv->irq_mask_offset); |
44c65d16 | 3962 | } |
51de32d2 | 3963 | |
6be96ac1 ML |
3964 | /* |
3965 | * enable only global host interrupts for now. | |
3966 | * The per-port interrupts get done later as ports are set up. | |
3967 | */ | |
3968 | mv_set_main_irq_mask(host, 0, PCI_ERR); | |
2b748a0a ML |
3969 | mv_set_irq_coalescing(host, irq_coalescing_io_count, |
3970 | irq_coalescing_usecs); | |
f351b2d6 SB |
3971 | done: |
3972 | return rc; | |
3973 | } | |
fb621e2f | 3974 | |
fbf14e2f BB |
3975 | static int mv_create_dma_pools(struct mv_host_priv *hpriv, struct device *dev) |
3976 | { | |
3977 | hpriv->crqb_pool = dmam_pool_create("crqb_q", dev, MV_CRQB_Q_SZ, | |
3978 | MV_CRQB_Q_SZ, 0); | |
3979 | if (!hpriv->crqb_pool) | |
3980 | return -ENOMEM; | |
3981 | ||
3982 | hpriv->crpb_pool = dmam_pool_create("crpb_q", dev, MV_CRPB_Q_SZ, | |
3983 | MV_CRPB_Q_SZ, 0); | |
3984 | if (!hpriv->crpb_pool) | |
3985 | return -ENOMEM; | |
3986 | ||
3987 | hpriv->sg_tbl_pool = dmam_pool_create("sg_tbl", dev, MV_SG_TBL_SZ, | |
3988 | MV_SG_TBL_SZ, 0); | |
3989 | if (!hpriv->sg_tbl_pool) | |
3990 | return -ENOMEM; | |
3991 | ||
3992 | return 0; | |
3993 | } | |
3994 | ||
15a32632 | 3995 | static void mv_conf_mbus_windows(struct mv_host_priv *hpriv, |
63a9332b | 3996 | const struct mbus_dram_target_info *dram) |
15a32632 LB |
3997 | { |
3998 | int i; | |
3999 | ||
4000 | for (i = 0; i < 4; i++) { | |
4001 | writel(0, hpriv->base + WINDOW_CTRL(i)); | |
4002 | writel(0, hpriv->base + WINDOW_BASE(i)); | |
4003 | } | |
4004 | ||
4005 | for (i = 0; i < dram->num_cs; i++) { | |
63a9332b | 4006 | const struct mbus_dram_window *cs = dram->cs + i; |
15a32632 LB |
4007 | |
4008 | writel(((cs->size - 1) & 0xffff0000) | | |
4009 | (cs->mbus_attr << 8) | | |
4010 | (dram->mbus_dram_target_id << 4) | 1, | |
4011 | hpriv->base + WINDOW_CTRL(i)); | |
4012 | writel(cs->base, hpriv->base + WINDOW_BASE(i)); | |
4013 | } | |
4014 | } | |
4015 | ||
f351b2d6 SB |
4016 | /** |
4017 | * mv_platform_probe - handle a positive probe of an soc Marvell | |
4018 | * host | |
4019 | * @pdev: platform device found | |
4020 | * | |
4021 | * LOCKING: | |
4022 | * Inherited from caller. | |
4023 | */ | |
4024 | static int mv_platform_probe(struct platform_device *pdev) | |
4025 | { | |
f351b2d6 | 4026 | const struct mv_sata_platform_data *mv_platform_data; |
63a9332b | 4027 | const struct mbus_dram_target_info *dram; |
f351b2d6 SB |
4028 | const struct ata_port_info *ppi[] = |
4029 | { &mv_port_info[chip_soc], NULL }; | |
4030 | struct ata_host *host; | |
4031 | struct mv_host_priv *hpriv; | |
4032 | struct resource *res; | |
97b414e1 | 4033 | int n_ports = 0, irq = 0; |
99b80e97 | 4034 | int rc; |
eee98990 AL |
4035 | #if defined(CONFIG_HAVE_CLK) |
4036 | int port; | |
4037 | #endif | |
20f733e7 | 4038 | |
06296a1e | 4039 | ata_print_version_once(&pdev->dev, DRV_VERSION); |
bca1c4eb | 4040 | |
f351b2d6 SB |
4041 | /* |
4042 | * Simple resource validation .. | |
4043 | */ | |
4044 | if (unlikely(pdev->num_resources != 2)) { | |
4045 | dev_err(&pdev->dev, "invalid number of resources\n"); | |
4046 | return -EINVAL; | |
4047 | } | |
4048 | ||
4049 | /* | |
4050 | * Get the register base first | |
4051 | */ | |
4052 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
4053 | if (res == NULL) | |
4054 | return -EINVAL; | |
4055 | ||
4056 | /* allocate host */ | |
97b414e1 AL |
4057 | if (pdev->dev.of_node) { |
4058 | of_property_read_u32(pdev->dev.of_node, "nr-ports", &n_ports); | |
4059 | irq = irq_of_parse_and_map(pdev->dev.of_node, 0); | |
4060 | } else { | |
4061 | mv_platform_data = pdev->dev.platform_data; | |
4062 | n_ports = mv_platform_data->n_ports; | |
4063 | irq = platform_get_irq(pdev, 0); | |
4064 | } | |
f351b2d6 SB |
4065 | |
4066 | host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports); | |
4067 | hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL); | |
4068 | ||
4069 | if (!host || !hpriv) | |
4070 | return -ENOMEM; | |
eee98990 AL |
4071 | #if defined(CONFIG_HAVE_CLK) |
4072 | hpriv->port_clks = devm_kzalloc(&pdev->dev, | |
4073 | sizeof(struct clk *) * n_ports, | |
4074 | GFP_KERNEL); | |
4075 | if (!hpriv->port_clks) | |
4076 | return -ENOMEM; | |
4077 | #endif | |
f351b2d6 SB |
4078 | host->private_data = hpriv; |
4079 | hpriv->n_ports = n_ports; | |
1bfeff03 | 4080 | hpriv->board_idx = chip_soc; |
f351b2d6 SB |
4081 | |
4082 | host->iomap = NULL; | |
f1cb0ea1 | 4083 | hpriv->base = devm_ioremap(&pdev->dev, res->start, |
041b5eac | 4084 | resource_size(res)); |
cae5a29d | 4085 | hpriv->base -= SATAHC0_REG_BASE; |
f351b2d6 | 4086 | |
c77a2f4e SB |
4087 | #if defined(CONFIG_HAVE_CLK) |
4088 | hpriv->clk = clk_get(&pdev->dev, NULL); | |
4089 | if (IS_ERR(hpriv->clk)) | |
eee98990 | 4090 | dev_notice(&pdev->dev, "cannot get optional clkdev\n"); |
c77a2f4e | 4091 | else |
eee98990 AL |
4092 | clk_prepare_enable(hpriv->clk); |
4093 | ||
4094 | for (port = 0; port < n_ports; port++) { | |
4095 | char port_number[16]; | |
4096 | sprintf(port_number, "%d", port); | |
4097 | hpriv->port_clks[port] = clk_get(&pdev->dev, port_number); | |
4098 | if (!IS_ERR(hpriv->port_clks[port])) | |
4099 | clk_prepare_enable(hpriv->port_clks[port]); | |
4100 | } | |
c77a2f4e SB |
4101 | #endif |
4102 | ||
15a32632 LB |
4103 | /* |
4104 | * (Re-)program MBUS remapping windows if we are asked to. | |
4105 | */ | |
63a9332b AL |
4106 | dram = mv_mbus_dram_info(); |
4107 | if (dram) | |
4108 | mv_conf_mbus_windows(hpriv, dram); | |
15a32632 | 4109 | |
fbf14e2f BB |
4110 | rc = mv_create_dma_pools(hpriv, &pdev->dev); |
4111 | if (rc) | |
c77a2f4e | 4112 | goto err; |
fbf14e2f | 4113 | |
f351b2d6 | 4114 | /* initialize adapter */ |
1bfeff03 | 4115 | rc = mv_init_host(host); |
f351b2d6 | 4116 | if (rc) |
c77a2f4e | 4117 | goto err; |
f351b2d6 | 4118 | |
a44fec1f JP |
4119 | dev_info(&pdev->dev, "slots %u ports %d\n", |
4120 | (unsigned)MV_MAX_Q_DEPTH, host->n_ports); | |
f351b2d6 | 4121 | |
97b414e1 | 4122 | rc = ata_host_activate(host, irq, mv_interrupt, IRQF_SHARED, &mv6_sht); |
c00a4c9d SS |
4123 | if (!rc) |
4124 | return 0; | |
4125 | ||
c77a2f4e SB |
4126 | err: |
4127 | #if defined(CONFIG_HAVE_CLK) | |
4128 | if (!IS_ERR(hpriv->clk)) { | |
eee98990 | 4129 | clk_disable_unprepare(hpriv->clk); |
c77a2f4e SB |
4130 | clk_put(hpriv->clk); |
4131 | } | |
eee98990 AL |
4132 | for (port = 0; port < n_ports; port++) { |
4133 | if (!IS_ERR(hpriv->port_clks[port])) { | |
4134 | clk_disable_unprepare(hpriv->port_clks[port]); | |
4135 | clk_put(hpriv->port_clks[port]); | |
4136 | } | |
4137 | } | |
c77a2f4e SB |
4138 | #endif |
4139 | ||
4140 | return rc; | |
f351b2d6 SB |
4141 | } |
4142 | ||
4143 | /* | |
4144 | * | |
4145 | * mv_platform_remove - unplug a platform interface | |
4146 | * @pdev: platform device | |
4147 | * | |
4148 | * A platform bus SATA device has been unplugged. Perform the needed | |
4149 | * cleanup. Also called on module unload for any active devices. | |
4150 | */ | |
0ec24914 | 4151 | static int mv_platform_remove(struct platform_device *pdev) |
f351b2d6 | 4152 | { |
d8661921 | 4153 | struct ata_host *host = platform_get_drvdata(pdev); |
c77a2f4e SB |
4154 | #if defined(CONFIG_HAVE_CLK) |
4155 | struct mv_host_priv *hpriv = host->private_data; | |
eee98990 | 4156 | int port; |
c77a2f4e | 4157 | #endif |
f351b2d6 | 4158 | ata_host_detach(host); |
c77a2f4e SB |
4159 | |
4160 | #if defined(CONFIG_HAVE_CLK) | |
4161 | if (!IS_ERR(hpriv->clk)) { | |
eee98990 | 4162 | clk_disable_unprepare(hpriv->clk); |
c77a2f4e SB |
4163 | clk_put(hpriv->clk); |
4164 | } | |
eee98990 AL |
4165 | for (port = 0; port < host->n_ports; port++) { |
4166 | if (!IS_ERR(hpriv->port_clks[port])) { | |
4167 | clk_disable_unprepare(hpriv->port_clks[port]); | |
4168 | clk_put(hpriv->port_clks[port]); | |
4169 | } | |
4170 | } | |
c77a2f4e | 4171 | #endif |
f351b2d6 | 4172 | return 0; |
20f733e7 BR |
4173 | } |
4174 | ||
6481f2b5 SB |
4175 | #ifdef CONFIG_PM |
4176 | static int mv_platform_suspend(struct platform_device *pdev, pm_message_t state) | |
4177 | { | |
d8661921 | 4178 | struct ata_host *host = platform_get_drvdata(pdev); |
6481f2b5 SB |
4179 | if (host) |
4180 | return ata_host_suspend(host, state); | |
4181 | else | |
4182 | return 0; | |
4183 | } | |
4184 | ||
4185 | static int mv_platform_resume(struct platform_device *pdev) | |
4186 | { | |
d8661921 | 4187 | struct ata_host *host = platform_get_drvdata(pdev); |
63a9332b | 4188 | const struct mbus_dram_target_info *dram; |
6481f2b5 SB |
4189 | int ret; |
4190 | ||
4191 | if (host) { | |
4192 | struct mv_host_priv *hpriv = host->private_data; | |
63a9332b | 4193 | |
6481f2b5 SB |
4194 | /* |
4195 | * (Re-)program MBUS remapping windows if we are asked to. | |
4196 | */ | |
63a9332b AL |
4197 | dram = mv_mbus_dram_info(); |
4198 | if (dram) | |
4199 | mv_conf_mbus_windows(hpriv, dram); | |
6481f2b5 SB |
4200 | |
4201 | /* initialize adapter */ | |
1bfeff03 | 4202 | ret = mv_init_host(host); |
6481f2b5 SB |
4203 | if (ret) { |
4204 | printk(KERN_ERR DRV_NAME ": Error during HW init\n"); | |
4205 | return ret; | |
4206 | } | |
4207 | ata_host_resume(host); | |
4208 | } | |
4209 | ||
4210 | return 0; | |
4211 | } | |
4212 | #else | |
4213 | #define mv_platform_suspend NULL | |
4214 | #define mv_platform_resume NULL | |
4215 | #endif | |
4216 | ||
97b414e1 | 4217 | #ifdef CONFIG_OF |
0ec24914 | 4218 | static struct of_device_id mv_sata_dt_ids[] = { |
97b414e1 AL |
4219 | { .compatible = "marvell,orion-sata", }, |
4220 | {}, | |
4221 | }; | |
4222 | MODULE_DEVICE_TABLE(of, mv_sata_dt_ids); | |
4223 | #endif | |
4224 | ||
f351b2d6 | 4225 | static struct platform_driver mv_platform_driver = { |
97b414e1 | 4226 | .probe = mv_platform_probe, |
0ec24914 | 4227 | .remove = mv_platform_remove, |
97b414e1 AL |
4228 | .suspend = mv_platform_suspend, |
4229 | .resume = mv_platform_resume, | |
4230 | .driver = { | |
4231 | .name = DRV_NAME, | |
4232 | .owner = THIS_MODULE, | |
4233 | .of_match_table = of_match_ptr(mv_sata_dt_ids), | |
4234 | }, | |
f351b2d6 SB |
4235 | }; |
4236 | ||
4237 | ||
7bb3c529 | 4238 | #ifdef CONFIG_PCI |
f351b2d6 SB |
4239 | static int mv_pci_init_one(struct pci_dev *pdev, |
4240 | const struct pci_device_id *ent); | |
b2dec48c SB |
4241 | #ifdef CONFIG_PM |
4242 | static int mv_pci_device_resume(struct pci_dev *pdev); | |
4243 | #endif | |
f351b2d6 | 4244 | |
7bb3c529 SB |
4245 | |
4246 | static struct pci_driver mv_pci_driver = { | |
4247 | .name = DRV_NAME, | |
4248 | .id_table = mv_pci_tbl, | |
f351b2d6 | 4249 | .probe = mv_pci_init_one, |
7bb3c529 | 4250 | .remove = ata_pci_remove_one, |
b2dec48c SB |
4251 | #ifdef CONFIG_PM |
4252 | .suspend = ata_pci_device_suspend, | |
4253 | .resume = mv_pci_device_resume, | |
4254 | #endif | |
4255 | ||
7bb3c529 SB |
4256 | }; |
4257 | ||
7bb3c529 SB |
4258 | /* move to PCI layer or libata core? */ |
4259 | static int pci_go_64(struct pci_dev *pdev) | |
4260 | { | |
4261 | int rc; | |
4262 | ||
6a35528a YH |
4263 | if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) { |
4264 | rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)); | |
7bb3c529 | 4265 | if (rc) { |
284901a9 | 4266 | rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); |
7bb3c529 | 4267 | if (rc) { |
a44fec1f JP |
4268 | dev_err(&pdev->dev, |
4269 | "64-bit DMA enable failed\n"); | |
7bb3c529 SB |
4270 | return rc; |
4271 | } | |
4272 | } | |
4273 | } else { | |
284901a9 | 4274 | rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); |
7bb3c529 | 4275 | if (rc) { |
a44fec1f | 4276 | dev_err(&pdev->dev, "32-bit DMA enable failed\n"); |
7bb3c529 SB |
4277 | return rc; |
4278 | } | |
284901a9 | 4279 | rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); |
7bb3c529 | 4280 | if (rc) { |
a44fec1f JP |
4281 | dev_err(&pdev->dev, |
4282 | "32-bit consistent DMA enable failed\n"); | |
7bb3c529 SB |
4283 | return rc; |
4284 | } | |
4285 | } | |
4286 | ||
4287 | return rc; | |
4288 | } | |
4289 | ||
05b308e1 BR |
4290 | /** |
4291 | * mv_print_info - Dump key info to kernel log for perusal. | |
4447d351 | 4292 | * @host: ATA host to print info about |
05b308e1 BR |
4293 | * |
4294 | * FIXME: complete this. | |
4295 | * | |
4296 | * LOCKING: | |
4297 | * Inherited from caller. | |
4298 | */ | |
4447d351 | 4299 | static void mv_print_info(struct ata_host *host) |
31961943 | 4300 | { |
4447d351 TH |
4301 | struct pci_dev *pdev = to_pci_dev(host->dev); |
4302 | struct mv_host_priv *hpriv = host->private_data; | |
44c10138 | 4303 | u8 scc; |
c1e4fe71 | 4304 | const char *scc_s, *gen; |
31961943 BR |
4305 | |
4306 | /* Use this to determine the HW stepping of the chip so we know | |
4307 | * what errata to workaround | |
4308 | */ | |
31961943 BR |
4309 | pci_read_config_byte(pdev, PCI_CLASS_DEVICE, &scc); |
4310 | if (scc == 0) | |
4311 | scc_s = "SCSI"; | |
4312 | else if (scc == 0x01) | |
4313 | scc_s = "RAID"; | |
4314 | else | |
c1e4fe71 JG |
4315 | scc_s = "?"; |
4316 | ||
4317 | if (IS_GEN_I(hpriv)) | |
4318 | gen = "I"; | |
4319 | else if (IS_GEN_II(hpriv)) | |
4320 | gen = "II"; | |
4321 | else if (IS_GEN_IIE(hpriv)) | |
4322 | gen = "IIE"; | |
4323 | else | |
4324 | gen = "?"; | |
31961943 | 4325 | |
a44fec1f JP |
4326 | dev_info(&pdev->dev, "Gen-%s %u slots %u ports %s mode IRQ via %s\n", |
4327 | gen, (unsigned)MV_MAX_Q_DEPTH, host->n_ports, | |
4328 | scc_s, (MV_HP_FLAG_MSI & hpriv->hp_flags) ? "MSI" : "INTx"); | |
31961943 BR |
4329 | } |
4330 | ||
05b308e1 | 4331 | /** |
f351b2d6 | 4332 | * mv_pci_init_one - handle a positive probe of a PCI Marvell host |
05b308e1 BR |
4333 | * @pdev: PCI device found |
4334 | * @ent: PCI device ID entry for the matched host | |
4335 | * | |
4336 | * LOCKING: | |
4337 | * Inherited from caller. | |
4338 | */ | |
f351b2d6 SB |
4339 | static int mv_pci_init_one(struct pci_dev *pdev, |
4340 | const struct pci_device_id *ent) | |
20f733e7 | 4341 | { |
20f733e7 | 4342 | unsigned int board_idx = (unsigned int)ent->driver_data; |
4447d351 TH |
4343 | const struct ata_port_info *ppi[] = { &mv_port_info[board_idx], NULL }; |
4344 | struct ata_host *host; | |
4345 | struct mv_host_priv *hpriv; | |
c4bc7d73 | 4346 | int n_ports, port, rc; |
20f733e7 | 4347 | |
06296a1e | 4348 | ata_print_version_once(&pdev->dev, DRV_VERSION); |
20f733e7 | 4349 | |
4447d351 TH |
4350 | /* allocate host */ |
4351 | n_ports = mv_get_hc_count(ppi[0]->flags) * MV_PORTS_PER_HC; | |
4352 | ||
4353 | host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports); | |
4354 | hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL); | |
4355 | if (!host || !hpriv) | |
4356 | return -ENOMEM; | |
4357 | host->private_data = hpriv; | |
f351b2d6 | 4358 | hpriv->n_ports = n_ports; |
1bfeff03 | 4359 | hpriv->board_idx = board_idx; |
4447d351 TH |
4360 | |
4361 | /* acquire resources */ | |
24dc5f33 TH |
4362 | rc = pcim_enable_device(pdev); |
4363 | if (rc) | |
20f733e7 | 4364 | return rc; |
20f733e7 | 4365 | |
0d5ff566 TH |
4366 | rc = pcim_iomap_regions(pdev, 1 << MV_PRIMARY_BAR, DRV_NAME); |
4367 | if (rc == -EBUSY) | |
24dc5f33 | 4368 | pcim_pin_device(pdev); |
0d5ff566 | 4369 | if (rc) |
24dc5f33 | 4370 | return rc; |
4447d351 | 4371 | host->iomap = pcim_iomap_table(pdev); |
f351b2d6 | 4372 | hpriv->base = host->iomap[MV_PRIMARY_BAR]; |
20f733e7 | 4373 | |
d88184fb JG |
4374 | rc = pci_go_64(pdev); |
4375 | if (rc) | |
4376 | return rc; | |
4377 | ||
da2fa9ba ML |
4378 | rc = mv_create_dma_pools(hpriv, &pdev->dev); |
4379 | if (rc) | |
4380 | return rc; | |
4381 | ||
c4bc7d73 SB |
4382 | for (port = 0; port < host->n_ports; port++) { |
4383 | struct ata_port *ap = host->ports[port]; | |
4384 | void __iomem *port_mmio = mv_port_base(hpriv->base, port); | |
4385 | unsigned int offset = port_mmio - hpriv->base; | |
4386 | ||
4387 | ata_port_pbar_desc(ap, MV_PRIMARY_BAR, -1, "mmio"); | |
4388 | ata_port_pbar_desc(ap, MV_PRIMARY_BAR, offset, "port"); | |
4389 | } | |
4390 | ||
20f733e7 | 4391 | /* initialize adapter */ |
1bfeff03 | 4392 | rc = mv_init_host(host); |
24dc5f33 TH |
4393 | if (rc) |
4394 | return rc; | |
20f733e7 | 4395 | |
6d3c30ef ML |
4396 | /* Enable message-switched interrupts, if requested */ |
4397 | if (msi && pci_enable_msi(pdev) == 0) | |
4398 | hpriv->hp_flags |= MV_HP_FLAG_MSI; | |
20f733e7 | 4399 | |
31961943 | 4400 | mv_dump_pci_cfg(pdev, 0x68); |
4447d351 | 4401 | mv_print_info(host); |
20f733e7 | 4402 | |
4447d351 | 4403 | pci_set_master(pdev); |
ea8b4db9 | 4404 | pci_try_set_mwi(pdev); |
4447d351 | 4405 | return ata_host_activate(host, pdev->irq, mv_interrupt, IRQF_SHARED, |
c5d3e45a | 4406 | IS_GEN_I(hpriv) ? &mv5_sht : &mv6_sht); |
20f733e7 | 4407 | } |
b2dec48c SB |
4408 | |
4409 | #ifdef CONFIG_PM | |
4410 | static int mv_pci_device_resume(struct pci_dev *pdev) | |
4411 | { | |
d8661921 | 4412 | struct ata_host *host = pci_get_drvdata(pdev); |
b2dec48c SB |
4413 | int rc; |
4414 | ||
4415 | rc = ata_pci_device_do_resume(pdev); | |
4416 | if (rc) | |
4417 | return rc; | |
4418 | ||
4419 | /* initialize adapter */ | |
4420 | rc = mv_init_host(host); | |
4421 | if (rc) | |
4422 | return rc; | |
4423 | ||
4424 | ata_host_resume(host); | |
4425 | ||
4426 | return 0; | |
4427 | } | |
4428 | #endif | |
7bb3c529 | 4429 | #endif |
20f733e7 | 4430 | |
f351b2d6 | 4431 | static int mv_platform_probe(struct platform_device *pdev); |
0ec24914 | 4432 | static int mv_platform_remove(struct platform_device *pdev); |
f351b2d6 | 4433 | |
20f733e7 BR |
4434 | static int __init mv_init(void) |
4435 | { | |
7bb3c529 SB |
4436 | int rc = -ENODEV; |
4437 | #ifdef CONFIG_PCI | |
4438 | rc = pci_register_driver(&mv_pci_driver); | |
f351b2d6 SB |
4439 | if (rc < 0) |
4440 | return rc; | |
4441 | #endif | |
4442 | rc = platform_driver_register(&mv_platform_driver); | |
4443 | ||
4444 | #ifdef CONFIG_PCI | |
4445 | if (rc < 0) | |
4446 | pci_unregister_driver(&mv_pci_driver); | |
7bb3c529 SB |
4447 | #endif |
4448 | return rc; | |
20f733e7 BR |
4449 | } |
4450 | ||
4451 | static void __exit mv_exit(void) | |
4452 | { | |
7bb3c529 | 4453 | #ifdef CONFIG_PCI |
20f733e7 | 4454 | pci_unregister_driver(&mv_pci_driver); |
7bb3c529 | 4455 | #endif |
f351b2d6 | 4456 | platform_driver_unregister(&mv_platform_driver); |
20f733e7 BR |
4457 | } |
4458 | ||
4459 | MODULE_AUTHOR("Brett Russ"); | |
4460 | MODULE_DESCRIPTION("SCSI low-level driver for Marvell SATA controllers"); | |
4461 | MODULE_LICENSE("GPL"); | |
4462 | MODULE_DEVICE_TABLE(pci, mv_pci_tbl); | |
4463 | MODULE_VERSION(DRV_VERSION); | |
17c5aab5 | 4464 | MODULE_ALIAS("platform:" DRV_NAME); |
20f733e7 BR |
4465 | |
4466 | module_init(mv_init); | |
4467 | module_exit(mv_exit); |