]> Git Repo - linux.git/blame - drivers/char/rocket.c
projects / linux.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
PIE randomization
[linux.git] / drivers / char / rocket.c
CommitLineData
1da177e4
LT		 1/*
2 * RocketPort device driver for Linux
3 *
4 * Written by Theodore Ts'o, 1995, 1996, 1997, 1998, 1999, 2000.
5 *
6 * Copyright (C) 1995, 1996, 1997, 1998, 1999, 2000, 2003 by Comtrol, Inc.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of the
11 * License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful, but
14 * WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
16 * General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
21 */
22
23/*
24 * Kernel Synchronization:
25 *
26 * This driver has 2 kernel control paths - exception handlers (calls into the driver
27 * from user mode) and the timer bottom half (tasklet). This is a polled driver, interrupts
28 * are not used.
29 *
30 * Critical data:
31 * - rp_table[], accessed through passed "info" pointers, is a global (static) array of
32 * serial port state information and the xmit_buf circular buffer. Protected by
33 * a per port spinlock.
34 * - xmit_flags[], an array of ints indexed by line (port) number, indicating that there
35 * is data to be transmitted. Protected by atomic bit operations.
36 * - rp_num_ports, int indicating number of open ports, protected by atomic operations.
37 *
38 * rp_write() and rp_write_char() functions use a per port semaphore to protect against
39 * simultaneous access to the same port by more than one process.
40 */
41
42/****** Defines ******/
43#ifdef PCI_NUM_RESOURCES
44#define PCI_BASE_ADDRESS(dev, r) ((dev)->resource[r].start)
45#else
46#define PCI_BASE_ADDRESS(dev, r) ((dev)->base_address[r])
47#endif
48
49#define ROCKET_PARANOIA_CHECK
50#define ROCKET_DISABLE_SIMUSAGE
51
52#undef ROCKET_SOFT_FLOW
53#undef ROCKET_DEBUG_OPEN
54#undef ROCKET_DEBUG_INTR
55#undef ROCKET_DEBUG_WRITE
56#undef ROCKET_DEBUG_FLOW
57#undef ROCKET_DEBUG_THROTTLE
58#undef ROCKET_DEBUG_WAIT_UNTIL_SENT
59#undef ROCKET_DEBUG_RECEIVE
60#undef ROCKET_DEBUG_HANGUP
61#undef REV_PCI_ORDER
62#undef ROCKET_DEBUG_IO
63
64#define POLL_PERIOD HZ/100 /* Polling period .01 seconds (10ms) */
65
66/****** Kernel includes ******/
67
1da177e4
LT		 68#include <linux/module.h>
69#include <linux/errno.h>
70#include <linux/major.h>
71#include <linux/kernel.h>
72#include <linux/signal.h>
73#include <linux/slab.h>
74#include <linux/mm.h>
75#include <linux/sched.h>
76#include <linux/timer.h>
77#include <linux/interrupt.h>
78#include <linux/tty.h>
79#include <linux/tty_driver.h>
80#include <linux/tty_flip.h>
81#include <linux/string.h>
82#include <linux/fcntl.h>
83#include <linux/ptrace.h>
69f545ea 84#include <linux/mutex.h>
1da177e4
LT		 85#include <linux/ioport.h>
86#include <linux/delay.h>
87#include <linux/wait.h>
88#include <linux/pci.h>
89#include <asm/uaccess.h>
90#include <asm/atomic.h>
91#include <linux/bitops.h>
92#include <linux/spinlock.h>
1da177e4
LT		 93#include <linux/init.h>
94
95/****** RocketPort includes ******/
96
97#include "rocket_int.h"
98#include "rocket.h"
99
100#define ROCKET_VERSION "2.09"
101#define ROCKET_DATE "12-June-2003"
102
103/****** RocketPort Local Variables ******/
104
40565f19
JS		 105static void rp_do_poll(unsigned long dummy);
106
1da177e4
LT		 107static struct tty_driver *rocket_driver;
108
109static struct rocket_version driver_version = {
110 ROCKET_VERSION, ROCKET_DATE
111};
112
113static struct r_port *rp_table[MAX_RP_PORTS]; /* The main repository of serial port state information. */
114static unsigned int xmit_flags[NUM_BOARDS]; /* Bit significant, indicates port had data to transmit. */
115 /* eg. Bit 0 indicates port 0 has xmit data, ... */
116static atomic_t rp_num_ports_open; /* Number of serial ports open */
40565f19 117static DEFINE_TIMER(rocket_timer, rp_do_poll, 0, 0);
1da177e4
LT		 118
119static unsigned long board1; /* ISA addresses, retrieved from rocketport.conf */
120static unsigned long board2;
121static unsigned long board3;
122static unsigned long board4;
123static unsigned long controller;
124static int support_low_speed;
125static unsigned long modem1;
126static unsigned long modem2;
127static unsigned long modem3;
128static unsigned long modem4;
129static unsigned long pc104_1[8];
130static unsigned long pc104_2[8];
131static unsigned long pc104_3[8];
132static unsigned long pc104_4[8];
133static unsigned long *pc104[4] = { pc104_1, pc104_2, pc104_3, pc104_4 };
134
135static int rp_baud_base[NUM_BOARDS]; /* Board config info (Someday make a per-board structure) */
136static unsigned long rcktpt_io_addr[NUM_BOARDS];
137static int rcktpt_type[NUM_BOARDS];
138static int is_PCI[NUM_BOARDS];
139static rocketModel_t rocketModel[NUM_BOARDS];
140static int max_board;
141
142/*
143 * The following arrays define the interrupt bits corresponding to each AIOP.
144 * These bits are different between the ISA and regular PCI boards and the
145 * Universal PCI boards.
146 */
147
148static Word_t aiop_intr_bits[AIOP_CTL_SIZE] = {
149 AIOP_INTR_BIT_0,
150 AIOP_INTR_BIT_1,
151 AIOP_INTR_BIT_2,
152 AIOP_INTR_BIT_3
153};
154
155static Word_t upci_aiop_intr_bits[AIOP_CTL_SIZE] = {
156 UPCI_AIOP_INTR_BIT_0,
157 UPCI_AIOP_INTR_BIT_1,
158 UPCI_AIOP_INTR_BIT_2,
159 UPCI_AIOP_INTR_BIT_3
160};
161
f15313bf
AB		 162static Byte_t RData[RDATASIZE] = {
163 0x00, 0x09, 0xf6, 0x82,
164 0x02, 0x09, 0x86, 0xfb,
165 0x04, 0x09, 0x00, 0x0a,
166 0x06, 0x09, 0x01, 0x0a,
167 0x08, 0x09, 0x8a, 0x13,
168 0x0a, 0x09, 0xc5, 0x11,
169 0x0c, 0x09, 0x86, 0x85,
170 0x0e, 0x09, 0x20, 0x0a,
171 0x10, 0x09, 0x21, 0x0a,
172 0x12, 0x09, 0x41, 0xff,
173 0x14, 0x09, 0x82, 0x00,
174 0x16, 0x09, 0x82, 0x7b,
175 0x18, 0x09, 0x8a, 0x7d,
176 0x1a, 0x09, 0x88, 0x81,
177 0x1c, 0x09, 0x86, 0x7a,
178 0x1e, 0x09, 0x84, 0x81,
179 0x20, 0x09, 0x82, 0x7c,
180 0x22, 0x09, 0x0a, 0x0a
181};
182
183static Byte_t RRegData[RREGDATASIZE] = {
184 0x00, 0x09, 0xf6, 0x82, /* 00: Stop Rx processor */
185 0x08, 0x09, 0x8a, 0x13, /* 04: Tx software flow control */
186 0x0a, 0x09, 0xc5, 0x11, /* 08: XON char */
187 0x0c, 0x09, 0x86, 0x85, /* 0c: XANY */
188 0x12, 0x09, 0x41, 0xff, /* 10: Rx mask char */
189 0x14, 0x09, 0x82, 0x00, /* 14: Compare/Ignore #0 */
190 0x16, 0x09, 0x82, 0x7b, /* 18: Compare #1 */
191 0x18, 0x09, 0x8a, 0x7d, /* 1c: Compare #2 */
192 0x1a, 0x09, 0x88, 0x81, /* 20: Interrupt #1 */
193 0x1c, 0x09, 0x86, 0x7a, /* 24: Ignore/Replace #1 */
194 0x1e, 0x09, 0x84, 0x81, /* 28: Interrupt #2 */
195 0x20, 0x09, 0x82, 0x7c, /* 2c: Ignore/Replace #2 */
196 0x22, 0x09, 0x0a, 0x0a /* 30: Rx FIFO Enable */
197};
198
199static CONTROLLER_T sController[CTL_SIZE] = {
200 {-1, -1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0, 0},
201 {0, 0, 0, 0}, {-1, -1, -1, -1}, {0, 0, 0, 0}},
202 {-1, -1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0, 0},
203 {0, 0, 0, 0}, {-1, -1, -1, -1}, {0, 0, 0, 0}},
204 {-1, -1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0, 0},
205 {0, 0, 0, 0}, {-1, -1, -1, -1}, {0, 0, 0, 0}},
206 {-1, -1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0, 0},
207 {0, 0, 0, 0}, {-1, -1, -1, -1}, {0, 0, 0, 0}}
208};
209
210static Byte_t sBitMapClrTbl[8] = {
211 0xfe, 0xfd, 0xfb, 0xf7, 0xef, 0xdf, 0xbf, 0x7f
212};
213
214static Byte_t sBitMapSetTbl[8] = {
215 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80
216};
217
218static int sClockPrescale = 0x14;
219
1da177e4
LT		 220/*
221 * Line number is the ttySIx number (x), the Minor number. We
222 * assign them sequentially, starting at zero. The following
223 * array keeps track of the line number assigned to a given board/aiop/channel.
224 */
225static unsigned char lineNumbers[MAX_RP_PORTS];
226static unsigned long nextLineNumber;
227
228/***** RocketPort Static Prototypes *********/
229static int __init init_ISA(int i);
230static void rp_wait_until_sent(struct tty_struct *tty, int timeout);
231static void rp_flush_buffer(struct tty_struct *tty);
232static void rmSpeakerReset(CONTROLLER_T * CtlP, unsigned long model);
233static unsigned char GetLineNumber(int ctrl, int aiop, int ch);
234static unsigned char SetLineNumber(int ctrl, int aiop, int ch);
235static void rp_start(struct tty_struct *tty);
f15313bf
AB		 236static int sInitChan(CONTROLLER_T * CtlP, CHANNEL_T * ChP, int AiopNum,
237 int ChanNum);
238static void sSetInterfaceMode(CHANNEL_T * ChP, Byte_t mode);
239static void sFlushRxFIFO(CHANNEL_T * ChP);
240static void sFlushTxFIFO(CHANNEL_T * ChP);
241static void sEnInterrupts(CHANNEL_T * ChP, Word_t Flags);
242static void sDisInterrupts(CHANNEL_T * ChP, Word_t Flags);
243static void sModemReset(CONTROLLER_T * CtlP, int chan, int on);
244static void sPCIModemReset(CONTROLLER_T * CtlP, int chan, int on);
245static int sWriteTxPrioByte(CHANNEL_T * ChP, Byte_t Data);
246static int sPCIInitController(CONTROLLER_T * CtlP, int CtlNum,
247 ByteIO_t * AiopIOList, int AiopIOListSize,
248 WordIO_t ConfigIO, int IRQNum, Byte_t Frequency,
249 int PeriodicOnly, int altChanRingIndicator,
250 int UPCIRingInd);
251static int sInitController(CONTROLLER_T * CtlP, int CtlNum, ByteIO_t MudbacIO,
252 ByteIO_t * AiopIOList, int AiopIOListSize,
253 int IRQNum, Byte_t Frequency, int PeriodicOnly);
254static int sReadAiopID(ByteIO_t io);
255static int sReadAiopNumChan(WordIO_t io);
1da177e4 256
1da177e4
LT		 257MODULE_AUTHOR("Theodore Ts'o");
258MODULE_DESCRIPTION("Comtrol RocketPort driver");
259module_param(board1, ulong, 0);
260MODULE_PARM_DESC(board1, "I/O port for (ISA) board #1");
261module_param(board2, ulong, 0);
262MODULE_PARM_DESC(board2, "I/O port for (ISA) board #2");
263module_param(board3, ulong, 0);
264MODULE_PARM_DESC(board3, "I/O port for (ISA) board #3");
265module_param(board4, ulong, 0);
266MODULE_PARM_DESC(board4, "I/O port for (ISA) board #4");
267module_param(controller, ulong, 0);
268MODULE_PARM_DESC(controller, "I/O port for (ISA) rocketport controller");
269module_param(support_low_speed, bool, 0);
270MODULE_PARM_DESC(support_low_speed, "1 means support 50 baud, 0 means support 460400 baud");
271module_param(modem1, ulong, 0);
272MODULE_PARM_DESC(modem1, "1 means (ISA) board #1 is a RocketModem");
273module_param(modem2, ulong, 0);
274MODULE_PARM_DESC(modem2, "1 means (ISA) board #2 is a RocketModem");
275module_param(modem3, ulong, 0);
276MODULE_PARM_DESC(modem3, "1 means (ISA) board #3 is a RocketModem");
277module_param(modem4, ulong, 0);
278MODULE_PARM_DESC(modem4, "1 means (ISA) board #4 is a RocketModem");
279module_param_array(pc104_1, ulong, NULL, 0);
280MODULE_PARM_DESC(pc104_1, "set interface types for ISA(PC104) board #1 (e.g. pc104_1=232,232,485,485,...");
281module_param_array(pc104_2, ulong, NULL, 0);
282MODULE_PARM_DESC(pc104_2, "set interface types for ISA(PC104) board #2 (e.g. pc104_2=232,232,485,485,...");
283module_param_array(pc104_3, ulong, NULL, 0);
284MODULE_PARM_DESC(pc104_3, "set interface types for ISA(PC104) board #3 (e.g. pc104_3=232,232,485,485,...");
285module_param_array(pc104_4, ulong, NULL, 0);
286MODULE_PARM_DESC(pc104_4, "set interface types for ISA(PC104) board #4 (e.g. pc104_4=232,232,485,485,...");
287
d269cdd0 288static int rp_init(void);
1da177e4
LT		 289static void rp_cleanup_module(void);
290
291module_init(rp_init);
292module_exit(rp_cleanup_module);
293
1da177e4 294
1da177e4 295MODULE_LICENSE("Dual BSD/GPL");
1da177e4
LT		 296
297/*************************************************************************/
298/* Module code starts here */
299
300static inline int rocket_paranoia_check(struct r_port *info,
301 const char *routine)
302{
303#ifdef ROCKET_PARANOIA_CHECK
304 if (!info)
305 return 1;
306 if (info->magic != RPORT_MAGIC) {
307 printk(KERN_INFO "Warning: bad magic number for rocketport struct in %s\n",
308 routine);
309 return 1;
310 }
311#endif
312 return 0;
313}
314
315
316/* Serial port receive data function. Called (from timer poll) when an AIOPIC signals
317 * that receive data is present on a serial port. Pulls data from FIFO, moves it into the
318 * tty layer.
319 */
320static void rp_do_receive(struct r_port *info,
321 struct tty_struct *tty,
322 CHANNEL_t * cp, unsigned int ChanStatus)
323{
324 unsigned int CharNStat;
cc44a817
PF		 325 int ToRecv, wRecv, space;
326 unsigned char *cbuf;
1da177e4
LT		 327
328 ToRecv = sGetRxCnt(cp);
1da177e4 329#ifdef ROCKET_DEBUG_INTR
cc44a817 330 printk(KERN_INFO "rp_do_receive(%d)...", ToRecv);
1da177e4 331#endif
cc44a817
PF		 332 if (ToRecv == 0)
333 return;
33f0f88f 334
1da177e4
LT		 335 /*
336 * if status indicates there are errored characters in the
337 * FIFO, then enter status mode (a word in FIFO holds
338 * character and status).
339 */
340 if (ChanStatus & (RXFOVERFL | RXBREAK | RXFRAME | RXPARITY)) {
341 if (!(ChanStatus & STATMODE)) {
342#ifdef ROCKET_DEBUG_RECEIVE
343 printk(KERN_INFO "Entering STATMODE...");
344#endif
345 ChanStatus |= STATMODE;
346 sEnRxStatusMode(cp);
347 }
348 }
349
350 /*
351 * if we previously entered status mode, then read down the
352 * FIFO one word at a time, pulling apart the character and
353 * the status. Update error counters depending on status
354 */
355 if (ChanStatus & STATMODE) {
356#ifdef ROCKET_DEBUG_RECEIVE
357 printk(KERN_INFO "Ignore %x, read %x...", info->ignore_status_mask,
358 info->read_status_mask);
359#endif
360 while (ToRecv) {
cc44a817
PF		 361 char flag;
362
1da177e4
LT		 363 CharNStat = sInW(sGetTxRxDataIO(cp));
364#ifdef ROCKET_DEBUG_RECEIVE
365 printk(KERN_INFO "%x...", CharNStat);
366#endif
367 if (CharNStat & STMBREAKH)
368 CharNStat &= ~(STMFRAMEH | STMPARITYH);
369 if (CharNStat & info->ignore_status_mask) {
370 ToRecv--;
371 continue;
372 }
373 CharNStat &= info->read_status_mask;
374 if (CharNStat & STMBREAKH)
cc44a817 375 flag = TTY_BREAK;
1da177e4 376 else if (CharNStat & STMPARITYH)
cc44a817 377 flag = TTY_PARITY;
1da177e4 378 else if (CharNStat & STMFRAMEH)
cc44a817 379 flag = TTY_FRAME;
1da177e4 380 else if (CharNStat & STMRCVROVRH)
cc44a817 381 flag = TTY_OVERRUN;
1da177e4 382 else
cc44a817
PF		 383 flag = TTY_NORMAL;
384 tty_insert_flip_char(tty, CharNStat & 0xff, flag);
1da177e4
LT		 385 ToRecv--;
386 }
387
388 /*
389 * after we've emptied the FIFO in status mode, turn
390 * status mode back off
391 */
392 if (sGetRxCnt(cp) == 0) {
393#ifdef ROCKET_DEBUG_RECEIVE
394 printk(KERN_INFO "Status mode off.\n");
395#endif
396 sDisRxStatusMode(cp);
397 }
398 } else {
399 /*
400 * we aren't in status mode, so read down the FIFO two
401 * characters at time by doing repeated word IO
402 * transfer.
403 */
cc44a817
PF		 404 space = tty_prepare_flip_string(tty, &cbuf, ToRecv);
405 if (space < ToRecv) {
406#ifdef ROCKET_DEBUG_RECEIVE
407 printk(KERN_INFO "rp_do_receive:insufficient space ToRecv=%d space=%d\n", ToRecv, space);
408#endif
409 if (space <= 0)
410 return;
411 ToRecv = space;
412 }
1da177e4
LT		 413 wRecv = ToRecv >> 1;
414 if (wRecv)
415 sInStrW(sGetTxRxDataIO(cp), (unsigned short *) cbuf, wRecv);
416 if (ToRecv & 1)
417 cbuf[ToRecv - 1] = sInB(sGetTxRxDataIO(cp));
1da177e4
LT		 418 }
419 /* Push the data up to the tty layer */
cc44a817 420 tty_flip_buffer_push(tty);
1da177e4
LT		 421}
422
423/*
424 * Serial port transmit data function. Called from the timer polling loop as a
425 * result of a bit set in xmit_flags[], indicating data (from the tty layer) is ready
426 * to be sent out the serial port. Data is buffered in rp_table[line].xmit_buf, it is
427 * moved to the port's xmit FIFO. *info is critical data, protected by spinlocks.
428 */
429static void rp_do_transmit(struct r_port *info)
430{
431 int c;
432 CHANNEL_t *cp = &info->channel;
433 struct tty_struct *tty;
434 unsigned long flags;
435
436#ifdef ROCKET_DEBUG_INTR
437 printk(KERN_INFO "rp_do_transmit ");
438#endif
439 if (!info)
440 return;
441 if (!info->tty) {
442 printk(KERN_INFO "rp: WARNING rp_do_transmit called with info->tty==NULL\n");
443 clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
444 return;
445 }
446
447 spin_lock_irqsave(&info->slock, flags);
448 tty = info->tty;
449 info->xmit_fifo_room = TXFIFO_SIZE - sGetTxCnt(cp);
450
451 /* Loop sending data to FIFO until done or FIFO full */
452 while (1) {
453 if (tty->stopped || tty->hw_stopped)
454 break;
455 c = min(info->xmit_fifo_room, min(info->xmit_cnt, XMIT_BUF_SIZE - info->xmit_tail));
456 if (c <= 0 || info->xmit_fifo_room <= 0)
457 break;
458 sOutStrW(sGetTxRxDataIO(cp), (unsigned short *) (info->xmit_buf + info->xmit_tail), c / 2);
459 if (c & 1)
460 sOutB(sGetTxRxDataIO(cp), info->xmit_buf[info->xmit_tail + c - 1]);
461 info->xmit_tail += c;
462 info->xmit_tail &= XMIT_BUF_SIZE - 1;
463 info->xmit_cnt -= c;
464 info->xmit_fifo_room -= c;
465#ifdef ROCKET_DEBUG_INTR
466 printk(KERN_INFO "tx %d chars...", c);
467#endif
468 }
469
470 if (info->xmit_cnt == 0)
471 clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
472
473 if (info->xmit_cnt < WAKEUP_CHARS) {
474 tty_wakeup(tty);
1da177e4
LT		 475#ifdef ROCKETPORT_HAVE_POLL_WAIT
476 wake_up_interruptible(&tty->poll_wait);
477#endif
478 }
479
480 spin_unlock_irqrestore(&info->slock, flags);
481
482#ifdef ROCKET_DEBUG_INTR
483 printk(KERN_INFO "(%d,%d,%d,%d)...", info->xmit_cnt, info->xmit_head,
484 info->xmit_tail, info->xmit_fifo_room);
485#endif
486}
487
488/*
489 * Called when a serial port signals it has read data in it's RX FIFO.
490 * It checks what interrupts are pending and services them, including
491 * receiving serial data.
492 */
493static void rp_handle_port(struct r_port *info)
494{
495 CHANNEL_t *cp;
496 struct tty_struct *tty;
497 unsigned int IntMask, ChanStatus;
498
499 if (!info)
500 return;
501
502 if ((info->flags & ROCKET_INITIALIZED) == 0) {
503 printk(KERN_INFO "rp: WARNING: rp_handle_port called with info->flags & NOT_INIT\n");
504 return;
505 }
506 if (!info->tty) {
507 printk(KERN_INFO "rp: WARNING: rp_handle_port called with info->tty==NULL\n");
508 return;
509 }
510 cp = &info->channel;
511 tty = info->tty;
512
513 IntMask = sGetChanIntID(cp) & info->intmask;
514#ifdef ROCKET_DEBUG_INTR
515 printk(KERN_INFO "rp_interrupt %02x...", IntMask);
516#endif
517 ChanStatus = sGetChanStatus(cp);
518 if (IntMask & RXF_TRIG) { /* Rx FIFO trigger level */
519 rp_do_receive(info, tty, cp, ChanStatus);
520 }
521 if (IntMask & DELTA_CD) { /* CD change */
522#if (defined(ROCKET_DEBUG_OPEN) || defined(ROCKET_DEBUG_INTR) || defined(ROCKET_DEBUG_HANGUP))
523 printk(KERN_INFO "ttyR%d CD now %s...", info->line,
524 (ChanStatus & CD_ACT) ? "on" : "off");
525#endif
526 if (!(ChanStatus & CD_ACT) && info->cd_status) {
527#ifdef ROCKET_DEBUG_HANGUP
528 printk(KERN_INFO "CD drop, calling hangup.\n");
529#endif
530 tty_hangup(tty);
531 }
532 info->cd_status = (ChanStatus & CD_ACT) ? 1 : 0;
533 wake_up_interruptible(&info->open_wait);
534 }
535#ifdef ROCKET_DEBUG_INTR
536 if (IntMask & DELTA_CTS) { /* CTS change */
537 printk(KERN_INFO "CTS change...\n");
538 }
539 if (IntMask & DELTA_DSR) { /* DSR change */
540 printk(KERN_INFO "DSR change...\n");
541 }
542#endif
543}
544
545/*
546 * The top level polling routine. Repeats every 1/100 HZ (10ms).
547 */
548static void rp_do_poll(unsigned long dummy)
549{
550 CONTROLLER_t *ctlp;
551 int ctrl, aiop, ch, line, i;
552 unsigned int xmitmask;
553 unsigned int CtlMask;
554 unsigned char AiopMask;
555 Word_t bit;
556
557 /* Walk through all the boards (ctrl's) */
558 for (ctrl = 0; ctrl < max_board; ctrl++) {
559 if (rcktpt_io_addr[ctrl] <= 0)
560 continue;
561
562 /* Get a ptr to the board's control struct */
563 ctlp = sCtlNumToCtlPtr(ctrl);
564
565 /* Get the interupt status from the board */
566#ifdef CONFIG_PCI
567 if (ctlp->BusType == isPCI)
568 CtlMask = sPCIGetControllerIntStatus(ctlp);
569 else
570#endif
571 CtlMask = sGetControllerIntStatus(ctlp);
572
573 /* Check if any AIOP read bits are set */
574 for (aiop = 0; CtlMask; aiop++) {
575 bit = ctlp->AiopIntrBits[aiop];
576 if (CtlMask & bit) {
577 CtlMask &= ~bit;
578 AiopMask = sGetAiopIntStatus(ctlp, aiop);
579
580 /* Check if any port read bits are set */
581 for (ch = 0; AiopMask; AiopMask >>= 1, ch++) {
582 if (AiopMask & 1) {
583
584 /* Get the line number (/dev/ttyRx number). */
585 /* Read the data from the port. */
586 line = GetLineNumber(ctrl, aiop, ch);
587 rp_handle_port(rp_table[line]);
588 }
589 }
590 }
591 }
592
593 xmitmask = xmit_flags[ctrl];
594
595 /*
596 * xmit_flags contains bit-significant flags, indicating there is data
597 * to xmit on the port. Bit 0 is port 0 on this board, bit 1 is port
598 * 1, ... (32 total possible). The variable i has the aiop and ch
599 * numbers encoded in it (port 0-7 are aiop0, 8-15 are aiop1, etc).
600 */
601 if (xmitmask) {
602 for (i = 0; i < rocketModel[ctrl].numPorts; i++) {
603 if (xmitmask & (1 << i)) {
604 aiop = (i & 0x18) >> 3;
605 ch = i & 0x07;
606 line = GetLineNumber(ctrl, aiop, ch);
607 rp_do_transmit(rp_table[line]);
608 }
609 }
610 }
611 }
612
613 /*
614 * Reset the timer so we get called at the next clock tick (10ms).
615 */
616 if (atomic_read(&rp_num_ports_open))
617 mod_timer(&rocket_timer, jiffies + POLL_PERIOD);
618}
619
620/*
621 * Initializes the r_port structure for a port, as well as enabling the port on
622 * the board.
623 * Inputs: board, aiop, chan numbers
624 */
625static void init_r_port(int board, int aiop, int chan, struct pci_dev *pci_dev)
626{
627 unsigned rocketMode;
628 struct r_port *info;
629 int line;
630 CONTROLLER_T *ctlp;
631
632 /* Get the next available line number */
633 line = SetLineNumber(board, aiop, chan);
634
635 ctlp = sCtlNumToCtlPtr(board);
636
637 /* Get a r_port struct for the port, fill it in and save it globally, indexed by line number */
638 info = kmalloc(sizeof (struct r_port), GFP_KERNEL);
639 if (!info) {
640 printk(KERN_INFO "Couldn't allocate info struct for line #%d\n", line);
641 return;
642 }
643 memset(info, 0, sizeof (struct r_port));
644
645 info->magic = RPORT_MAGIC;
646 info->line = line;
647 info->ctlp = ctlp;
648 info->board = board;
649 info->aiop = aiop;
650 info->chan = chan;
651 info->closing_wait = 3000;
652 info->close_delay = 50;
653 init_waitqueue_head(&info->open_wait);
654 init_waitqueue_head(&info->close_wait);
655 info->flags &= ~ROCKET_MODE_MASK;
656 switch (pc104[board][line]) {
657 case 422:
658 info->flags |= ROCKET_MODE_RS422;
659 break;
660 case 485:
661 info->flags |= ROCKET_MODE_RS485;
662 break;
663 case 232:
664 default:
665 info->flags |= ROCKET_MODE_RS232;
666 break;
667 }
668
669 info->intmask = RXF_TRIG | TXFIFO_MT | SRC_INT | DELTA_CD | DELTA_CTS | DELTA_DSR;
670 if (sInitChan(ctlp, &info->channel, aiop, chan) == 0) {
671 printk(KERN_INFO "RocketPort sInitChan(%d, %d, %d) failed!\n", board, aiop, chan);
672 kfree(info);
673 return;
674 }
675
676 rocketMode = info->flags & ROCKET_MODE_MASK;
677
678 if ((info->flags & ROCKET_RTS_TOGGLE) || (rocketMode == ROCKET_MODE_RS485))
679 sEnRTSToggle(&info->channel);
680 else
681 sDisRTSToggle(&info->channel);
682
683 if (ctlp->boardType == ROCKET_TYPE_PC104) {
684 switch (rocketMode) {
685 case ROCKET_MODE_RS485:
686 sSetInterfaceMode(&info->channel, InterfaceModeRS485);
687 break;
688 case ROCKET_MODE_RS422:
689 sSetInterfaceMode(&info->channel, InterfaceModeRS422);
690 break;
691 case ROCKET_MODE_RS232:
692 default:
693 if (info->flags & ROCKET_RTS_TOGGLE)
694 sSetInterfaceMode(&info->channel, InterfaceModeRS232T);
695 else
696 sSetInterfaceMode(&info->channel, InterfaceModeRS232);
697 break;
698 }
699 }
700 spin_lock_init(&info->slock);
69f545ea 701 mutex_init(&info->write_mtx);
1da177e4
LT		 702 rp_table[line] = info;
703 if (pci_dev)
704 tty_register_device(rocket_driver, line, &pci_dev->dev);
705}
706
707/*
708 * Configures a rocketport port according to its termio settings. Called from
709 * user mode into the driver (exception handler). *info CD manipulation is spinlock protected.
710 */
711static void configure_r_port(struct r_port *info,
606d099c 712 struct ktermios *old_termios)
1da177e4
LT		 713{
714 unsigned cflag;
715 unsigned long flags;
716 unsigned rocketMode;
717 int bits, baud, divisor;
718 CHANNEL_t *cp;
719
720 if (!info->tty || !info->tty->termios)
721 return;
722 cp = &info->channel;
723 cflag = info->tty->termios->c_cflag;
724
725 /* Byte size and parity */
726 if ((cflag & CSIZE) == CS8) {
727 sSetData8(cp);
728 bits = 10;
729 } else {
730 sSetData7(cp);
731 bits = 9;
732 }
733 if (cflag & CSTOPB) {
734 sSetStop2(cp);
735 bits++;
736 } else {
737 sSetStop1(cp);
738 }
739
740 if (cflag & PARENB) {
741 sEnParity(cp);
742 bits++;
743 if (cflag & PARODD) {
744 sSetOddParity(cp);
745 } else {
746 sSetEvenParity(cp);
747 }
748 } else {
749 sDisParity(cp);
750 }
751
752 /* baud rate */
753 baud = tty_get_baud_rate(info->tty);
754 if (!baud)
755 baud = 9600;
756 divisor = ((rp_baud_base[info->board] + (baud >> 1)) / baud) - 1;
757 if ((divisor >= 8192 || divisor < 0) && old_termios) {
758 info->tty->termios->c_cflag &= ~CBAUD;
759 info->tty->termios->c_cflag |=
760 (old_termios->c_cflag & CBAUD);
761 baud = tty_get_baud_rate(info->tty);
762 if (!baud)
763 baud = 9600;
764 divisor = (rp_baud_base[info->board] / baud) - 1;
765 }
766 if (divisor >= 8192 || divisor < 0) {
767 baud = 9600;
768 divisor = (rp_baud_base[info->board] / baud) - 1;
769 }
770 info->cps = baud / bits;
771 sSetBaud(cp, divisor);
772
773 if (cflag & CRTSCTS) {
774 info->intmask |= DELTA_CTS;
775 sEnCTSFlowCtl(cp);
776 } else {
777 info->intmask &= ~DELTA_CTS;
778 sDisCTSFlowCtl(cp);
779 }
780 if (cflag & CLOCAL) {
781 info->intmask &= ~DELTA_CD;
782 } else {
783 spin_lock_irqsave(&info->slock, flags);
784 if (sGetChanStatus(cp) & CD_ACT)
785 info->cd_status = 1;
786 else
787 info->cd_status = 0;
788 info->intmask |= DELTA_CD;
789 spin_unlock_irqrestore(&info->slock, flags);
790 }
791
792 /*
793 * Handle software flow control in the board
794 */
795#ifdef ROCKET_SOFT_FLOW
796 if (I_IXON(info->tty)) {
797 sEnTxSoftFlowCtl(cp);
798 if (I_IXANY(info->tty)) {
799 sEnIXANY(cp);
800 } else {
801 sDisIXANY(cp);
802 }
803 sSetTxXONChar(cp, START_CHAR(info->tty));
804 sSetTxXOFFChar(cp, STOP_CHAR(info->tty));
805 } else {
806 sDisTxSoftFlowCtl(cp);
807 sDisIXANY(cp);
808 sClrTxXOFF(cp);
809 }
810#endif
811
812 /*
813 * Set up ignore/read mask words
814 */
815 info->read_status_mask = STMRCVROVRH | 0xFF;
816 if (I_INPCK(info->tty))
817 info->read_status_mask |= STMFRAMEH | STMPARITYH;
818 if (I_BRKINT(info->tty) || I_PARMRK(info->tty))
819 info->read_status_mask |= STMBREAKH;
820
821 /*
822 * Characters to ignore
823 */
824 info->ignore_status_mask = 0;
825 if (I_IGNPAR(info->tty))
826 info->ignore_status_mask |= STMFRAMEH | STMPARITYH;
827 if (I_IGNBRK(info->tty)) {
828 info->ignore_status_mask |= STMBREAKH;
829 /*
830 * If we're ignoring parity and break indicators,
831 * ignore overruns too. (For real raw support).
832 */
833 if (I_IGNPAR(info->tty))
834 info->ignore_status_mask |= STMRCVROVRH;
835 }
836
837 rocketMode = info->flags & ROCKET_MODE_MASK;
838
839 if ((info->flags & ROCKET_RTS_TOGGLE)
840 || (rocketMode == ROCKET_MODE_RS485))
841 sEnRTSToggle(cp);
842 else
843 sDisRTSToggle(cp);
844
845 sSetRTS(&info->channel);
846
847 if (cp->CtlP->boardType == ROCKET_TYPE_PC104) {
848 switch (rocketMode) {
849 case ROCKET_MODE_RS485:
850 sSetInterfaceMode(cp, InterfaceModeRS485);
851 break;
852 case ROCKET_MODE_RS422:
853 sSetInterfaceMode(cp, InterfaceModeRS422);
854 break;
855 case ROCKET_MODE_RS232:
856 default:
857 if (info->flags & ROCKET_RTS_TOGGLE)
858 sSetInterfaceMode(cp, InterfaceModeRS232T);
859 else
860 sSetInterfaceMode(cp, InterfaceModeRS232);
861 break;
862 }
863 }
864}
865
866/* info->count is considered critical, protected by spinlocks. */
867static int block_til_ready(struct tty_struct *tty, struct file *filp,
868 struct r_port *info)
869{
870 DECLARE_WAITQUEUE(wait, current);
871 int retval;
872 int do_clocal = 0, extra_count = 0;
873 unsigned long flags;
874
875 /*
876 * If the device is in the middle of being closed, then block
877 * until it's done, and then try again.
878 */
879 if (tty_hung_up_p(filp))
880 return ((info->flags & ROCKET_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS);
881 if (info->flags & ROCKET_CLOSING) {
882 interruptible_sleep_on(&info->close_wait);
883 return ((info->flags & ROCKET_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS);
884 }
885
886 /*
887 * If non-blocking mode is set, or the port is not enabled,
888 * then make the check up front and then exit.
889 */
890 if ((filp->f_flags & O_NONBLOCK) || (tty->flags & (1 << TTY_IO_ERROR))) {
891 info->flags |= ROCKET_NORMAL_ACTIVE;
892 return 0;
893 }
894 if (tty->termios->c_cflag & CLOCAL)
895 do_clocal = 1;
896
897 /*
898 * Block waiting for the carrier detect and the line to become free. While we are in
899 * this loop, info->count is dropped by one, so that rp_close() knows when to free things.
900 * We restore it upon exit, either normal or abnormal.
901 */
902 retval = 0;
903 add_wait_queue(&info->open_wait, &wait);
904#ifdef ROCKET_DEBUG_OPEN
905 printk(KERN_INFO "block_til_ready before block: ttyR%d, count = %d\n", info->line, info->count);
906#endif
907 spin_lock_irqsave(&info->slock, flags);
908
909#ifdef ROCKET_DISABLE_SIMUSAGE
910 info->flags |= ROCKET_NORMAL_ACTIVE;
911#else
912 if (!tty_hung_up_p(filp)) {
913 extra_count = 1;
914 info->count--;
915 }
916#endif
917 info->blocked_open++;
918
919 spin_unlock_irqrestore(&info->slock, flags);
920
921 while (1) {
922 if (tty->termios->c_cflag & CBAUD) {
923 sSetDTR(&info->channel);
924 sSetRTS(&info->channel);
925 }
926 set_current_state(TASK_INTERRUPTIBLE);
927 if (tty_hung_up_p(filp) || !(info->flags & ROCKET_INITIALIZED)) {
928 if (info->flags & ROCKET_HUP_NOTIFY)
929 retval = -EAGAIN;
930 else
931 retval = -ERESTARTSYS;
932 break;
933 }
934 if (!(info->flags & ROCKET_CLOSING) && (do_clocal || (sGetChanStatusLo(&info->channel) & CD_ACT)))
935 break;
936 if (signal_pending(current)) {
937 retval = -ERESTARTSYS;
938 break;
939 }
940#ifdef ROCKET_DEBUG_OPEN
941 printk(KERN_INFO "block_til_ready blocking: ttyR%d, count = %d, flags=0x%0x\n",
942 info->line, info->count, info->flags);
943#endif
944 schedule(); /* Don't hold spinlock here, will hang PC */
945 }
cc0a8fbb 946 __set_current_state(TASK_RUNNING);
1da177e4
LT		 947 remove_wait_queue(&info->open_wait, &wait);
948
949 spin_lock_irqsave(&info->slock, flags);
950
951 if (extra_count)
952 info->count++;
953 info->blocked_open--;
954
955 spin_unlock_irqrestore(&info->slock, flags);
956
957#ifdef ROCKET_DEBUG_OPEN
958 printk(KERN_INFO "block_til_ready after blocking: ttyR%d, count = %d\n",
959 info->line, info->count);
960#endif
961 if (retval)
962 return retval;
963 info->flags |= ROCKET_NORMAL_ACTIVE;
964 return 0;
965}
966
967/*
968 * Exception handler that opens a serial port. Creates xmit_buf storage, fills in
969 * port's r_port struct. Initializes the port hardware.
970 */
971static int rp_open(struct tty_struct *tty, struct file *filp)
972{
973 struct r_port *info;
974 int line = 0, retval;
975 CHANNEL_t *cp;
976 unsigned long page;
977
978 line = TTY_GET_LINE(tty);
979 if ((line < 0) || (line >= MAX_RP_PORTS) || ((info = rp_table[line]) == NULL))
980 return -ENXIO;
981
982 page = __get_free_page(GFP_KERNEL);
983 if (!page)
984 return -ENOMEM;
985
986 if (info->flags & ROCKET_CLOSING) {
987 interruptible_sleep_on(&info->close_wait);
988 free_page(page);
989 return ((info->flags & ROCKET_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS);
990 }
991
992 /*
993 * We must not sleep from here until the port is marked fully in use.
994 */
995 if (info->xmit_buf)
996 free_page(page);
997 else
998 info->xmit_buf = (unsigned char *) page;
999
1000 tty->driver_data = info;
1001 info->tty = tty;
1002
1003 if (info->count++ == 0) {
1004 atomic_inc(&rp_num_ports_open);
1005
1006#ifdef ROCKET_DEBUG_OPEN
1007 printk(KERN_INFO "rocket mod++ = %d...", atomic_read(&rp_num_ports_open));
1008#endif
1009 }
1010#ifdef ROCKET_DEBUG_OPEN
1011 printk(KERN_INFO "rp_open ttyR%d, count=%d\n", info->line, info->count);
1012#endif
1013
1014 /*
1015 * Info->count is now 1; so it's safe to sleep now.
1016 */
1da177e4
LT		 1017 if ((info->flags & ROCKET_INITIALIZED) == 0) {
1018 cp = &info->channel;
1019 sSetRxTrigger(cp, TRIG_1);
1020 if (sGetChanStatus(cp) & CD_ACT)
1021 info->cd_status = 1;
1022 else
1023 info->cd_status = 0;
1024 sDisRxStatusMode(cp);
1025 sFlushRxFIFO(cp);
1026 sFlushTxFIFO(cp);
1027
1028 sEnInterrupts(cp, (TXINT_EN | MCINT_EN | RXINT_EN | SRCINT_EN | CHANINT_EN));
1029 sSetRxTrigger(cp, TRIG_1);
1030
1031 sGetChanStatus(cp);
1032 sDisRxStatusMode(cp);
1033 sClrTxXOFF(cp);
1034
1035 sDisCTSFlowCtl(cp);
1036 sDisTxSoftFlowCtl(cp);
1037
1038 sEnRxFIFO(cp);
1039 sEnTransmit(cp);
1040
1041 info->flags |= ROCKET_INITIALIZED;
1042
1043 /*
1044 * Set up the tty->alt_speed kludge
1045 */
1046 if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_HI)
1047 info->tty->alt_speed = 57600;
1048 if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_VHI)
1049 info->tty->alt_speed = 115200;
1050 if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_SHI)
1051 info->tty->alt_speed = 230400;
1052 if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_WARP)
1053 info->tty->alt_speed = 460800;
1054
1055 configure_r_port(info, NULL);
1056 if (tty->termios->c_cflag & CBAUD) {
1057 sSetDTR(cp);
1058 sSetRTS(cp);
1059 }
1060 }
1061 /* Starts (or resets) the maint polling loop */
1062 mod_timer(&rocket_timer, jiffies + POLL_PERIOD);
1063
1064 retval = block_til_ready(tty, filp, info);
1065 if (retval) {
1066#ifdef ROCKET_DEBUG_OPEN
1067 printk(KERN_INFO "rp_open returning after block_til_ready with %d\n", retval);
1068#endif
1069 return retval;
1070 }
1071 return 0;
1072}
1073
1074/*
1075 * Exception handler that closes a serial port. info->count is considered critical.
1076 */
1077static void rp_close(struct tty_struct *tty, struct file *filp)
1078{
1079 struct r_port *info = (struct r_port *) tty->driver_data;
1080 unsigned long flags;
1081 int timeout;
1082 CHANNEL_t *cp;
1083
1084 if (rocket_paranoia_check(info, "rp_close"))
1085 return;
1086
1087#ifdef ROCKET_DEBUG_OPEN
1088 printk(KERN_INFO "rp_close ttyR%d, count = %d\n", info->line, info->count);
1089#endif
1090
1091 if (tty_hung_up_p(filp))
1092 return;
1093 spin_lock_irqsave(&info->slock, flags);
1094
1095 if ((tty->count == 1) && (info->count != 1)) {
1096 /*
1097 * Uh, oh. tty->count is 1, which means that the tty
1098 * structure will be freed. Info->count should always
1099 * be one in these conditions. If it's greater than
1100 * one, we've got real problems, since it means the
1101 * serial port won't be shutdown.
1102 */
1103 printk(KERN_INFO "rp_close: bad serial port count; tty->count is 1, "
1104 "info->count is %d\n", info->count);
1105 info->count = 1;
1106 }
1107 if (--info->count < 0) {
1108 printk(KERN_INFO "rp_close: bad serial port count for ttyR%d: %d\n",
1109 info->line, info->count);
1110 info->count = 0;
1111 }
1112 if (info->count) {
1113 spin_unlock_irqrestore(&info->slock, flags);
1114 return;
1115 }
1116 info->flags |= ROCKET_CLOSING;
1117 spin_unlock_irqrestore(&info->slock, flags);
1118
1119 cp = &info->channel;
1120
1121 /*
1122 * Notify the line discpline to only process XON/XOFF characters
1123 */
1124 tty->closing = 1;
1125
1126 /*
1127 * If transmission was throttled by the application request,
1128 * just flush the xmit buffer.
1129 */
1130 if (tty->flow_stopped)
1131 rp_flush_buffer(tty);
1132
1133 /*
1134 * Wait for the transmit buffer to clear
1135 */
1136 if (info->closing_wait != ROCKET_CLOSING_WAIT_NONE)
1137 tty_wait_until_sent(tty, info->closing_wait);
1138 /*
1139 * Before we drop DTR, make sure the UART transmitter
1140 * has completely drained; this is especially
1141 * important if there is a transmit FIFO!
1142 */
1143 timeout = (sGetTxCnt(cp) + 1) * HZ / info->cps;
1144 if (timeout == 0)
1145 timeout = 1;
1146 rp_wait_until_sent(tty, timeout);
1147 clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
1148
1149 sDisTransmit(cp);
1150 sDisInterrupts(cp, (TXINT_EN | MCINT_EN | RXINT_EN | SRCINT_EN | CHANINT_EN));
1151 sDisCTSFlowCtl(cp);
1152 sDisTxSoftFlowCtl(cp);
1153 sClrTxXOFF(cp);
1154 sFlushRxFIFO(cp);
1155 sFlushTxFIFO(cp);
1156 sClrRTS(cp);
1157 if (C_HUPCL(tty))
1158 sClrDTR(cp);
1159
1160 if (TTY_DRIVER_FLUSH_BUFFER_EXISTS(tty))
1161 TTY_DRIVER_FLUSH_BUFFER(tty);
1162
1163 tty_ldisc_flush(tty);
1164
1165 clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
1166
1167 if (info->blocked_open) {
1168 if (info->close_delay) {
1169 msleep_interruptible(jiffies_to_msecs(info->close_delay));
1170 }
1171 wake_up_interruptible(&info->open_wait);
1172 } else {
1173 if (info->xmit_buf) {
1174 free_page((unsigned long) info->xmit_buf);
1175 info->xmit_buf = NULL;
1176 }
1177 }
1178 info->flags &= ~(ROCKET_INITIALIZED | ROCKET_CLOSING | ROCKET_NORMAL_ACTIVE);
1179 tty->closing = 0;
1180 wake_up_interruptible(&info->close_wait);
1181 atomic_dec(&rp_num_ports_open);
1182
1183#ifdef ROCKET_DEBUG_OPEN
1184 printk(KERN_INFO "rocket mod-- = %d...", atomic_read(&rp_num_ports_open));
1185 printk(KERN_INFO "rp_close ttyR%d complete shutdown\n", info->line);
1186#endif
1187
1188}
1189
1190static void rp_set_termios(struct tty_struct *tty,
606d099c 1191 struct ktermios *old_termios)
1da177e4
LT		 1192{
1193 struct r_port *info = (struct r_port *) tty->driver_data;
1194 CHANNEL_t *cp;
1195 unsigned cflag;
1196
1197 if (rocket_paranoia_check(info, "rp_set_termios"))
1198 return;
1199
1200 cflag = tty->termios->c_cflag;
1201
1202 if (cflag == old_termios->c_cflag)
1203 return;
1204
1205 /*
1206 * This driver doesn't support CS5 or CS6
1207 */
1208 if (((cflag & CSIZE) == CS5) || ((cflag & CSIZE) == CS6))
1209 tty->termios->c_cflag =
1210 ((cflag & ~CSIZE) | (old_termios->c_cflag & CSIZE));
1211
1212 configure_r_port(info, old_termios);
1213
1214 cp = &info->channel;
1215
1216 /* Handle transition to B0 status */
1217 if ((old_termios->c_cflag & CBAUD) && !(tty->termios->c_cflag & CBAUD)) {
1218 sClrDTR(cp);
1219 sClrRTS(cp);
1220 }
1221
1222 /* Handle transition away from B0 status */
1223 if (!(old_termios->c_cflag & CBAUD) && (tty->termios->c_cflag & CBAUD)) {
1224 if (!tty->hw_stopped || !(tty->termios->c_cflag & CRTSCTS))
1225 sSetRTS(cp);
1226 sSetDTR(cp);
1227 }
1228
1229 if ((old_termios->c_cflag & CRTSCTS) && !(tty->termios->c_cflag & CRTSCTS)) {
1230 tty->hw_stopped = 0;
1231 rp_start(tty);
1232 }
1233}
1234
1235static void rp_break(struct tty_struct *tty, int break_state)
1236{
1237 struct r_port *info = (struct r_port *) tty->driver_data;
1238 unsigned long flags;
1239
1240 if (rocket_paranoia_check(info, "rp_break"))
1241 return;
1242
1243 spin_lock_irqsave(&info->slock, flags);
1244 if (break_state == -1)
1245 sSendBreak(&info->channel);
1246 else
1247 sClrBreak(&info->channel);
1248 spin_unlock_irqrestore(&info->slock, flags);
1249}
1250
1251/*
1252 * sGetChanRI used to be a macro in rocket_int.h. When the functionality for
1253 * the UPCI boards was added, it was decided to make this a function because
1254 * the macro was getting too complicated. All cases except the first one
1255 * (UPCIRingInd) are taken directly from the original macro.
1256 */
1257static int sGetChanRI(CHANNEL_T * ChP)
1258{
1259 CONTROLLER_t *CtlP = ChP->CtlP;
1260 int ChanNum = ChP->ChanNum;
1261 int RingInd = 0;
1262
1263 if (CtlP->UPCIRingInd)
1264 RingInd = !(sInB(CtlP->UPCIRingInd) & sBitMapSetTbl[ChanNum]);
1265 else if (CtlP->AltChanRingIndicator)
1266 RingInd = sInB((ByteIO_t) (ChP->ChanStat + 8)) & DSR_ACT;
1267 else if (CtlP->boardType == ROCKET_TYPE_PC104)
1268 RingInd = !(sInB(CtlP->AiopIO[3]) & sBitMapSetTbl[ChanNum]);
1269
1270 return RingInd;
1271}
1272
1273/********************************************************************************************/
1274/* Here are the routines used by rp_ioctl. These are all called from exception handlers. */
1275
1276/*
1277 * Returns the state of the serial modem control lines. These next 2 functions
1278 * are the way kernel versions > 2.5 handle modem control lines rather than IOCTLs.
1279 */
1280static int rp_tiocmget(struct tty_struct *tty, struct file *file)
1281{
1282 struct r_port *info = (struct r_port *)tty->driver_data;
1283 unsigned int control, result, ChanStatus;
1284
1285 ChanStatus = sGetChanStatusLo(&info->channel);
1286 control = info->channel.TxControl[3];
1287 result = ((control & SET_RTS) ? TIOCM_RTS : 0) |
1288 ((control & SET_DTR) ? TIOCM_DTR : 0) |
1289 ((ChanStatus & CD_ACT) ? TIOCM_CAR : 0) |
1290 (sGetChanRI(&info->channel) ? TIOCM_RNG : 0) |
1291 ((ChanStatus & DSR_ACT) ? TIOCM_DSR : 0) |
1292 ((ChanStatus & CTS_ACT) ? TIOCM_CTS : 0);
1293
1294 return result;
1295}
1296
1297/*
1298 * Sets the modem control lines
1299 */
1300static int rp_tiocmset(struct tty_struct *tty, struct file *file,
1301 unsigned int set, unsigned int clear)
1302{
1303 struct r_port *info = (struct r_port *)tty->driver_data;
1304
1305 if (set & TIOCM_RTS)
1306 info->channel.TxControl[3] |= SET_RTS;
1307 if (set & TIOCM_DTR)
1308 info->channel.TxControl[3] |= SET_DTR;
1309 if (clear & TIOCM_RTS)
1310 info->channel.TxControl[3] &= ~SET_RTS;
1311 if (clear & TIOCM_DTR)
1312 info->channel.TxControl[3] &= ~SET_DTR;
1313
1314 sOutDW(info->channel.IndexAddr, *(DWord_t *) & (info->channel.TxControl[0]));
1315 return 0;
1316}
1317
1318static int get_config(struct r_port *info, struct rocket_config __user *retinfo)
1319{
1320 struct rocket_config tmp;
1321
1322 if (!retinfo)
1323 return -EFAULT;
1324 memset(&tmp, 0, sizeof (tmp));
1325 tmp.line = info->line;
1326 tmp.flags = info->flags;
1327 tmp.close_delay = info->close_delay;
1328 tmp.closing_wait = info->closing_wait;
1329 tmp.port = rcktpt_io_addr[(info->line >> 5) & 3];
1330
1331 if (copy_to_user(retinfo, &tmp, sizeof (*retinfo)))
1332 return -EFAULT;
1333 return 0;
1334}
1335
1336static int set_config(struct r_port *info, struct rocket_config __user *new_info)
1337{
1338 struct rocket_config new_serial;
1339
1340 if (copy_from_user(&new_serial, new_info, sizeof (new_serial)))
1341 return -EFAULT;
1342
1343 if (!capable(CAP_SYS_ADMIN))
1344 {
1345 if ((new_serial.flags & ~ROCKET_USR_MASK) != (info->flags & ~ROCKET_USR_MASK))
1346 return -EPERM;
1347 info->flags = ((info->flags & ~ROCKET_USR_MASK) | (new_serial.flags & ROCKET_USR_MASK));
1348 configure_r_port(info, NULL);
1349 return 0;
1350 }
1351
1352 info->flags = ((info->flags & ~ROCKET_FLAGS) | (new_serial.flags & ROCKET_FLAGS));
1353 info->close_delay = new_serial.close_delay;
1354 info->closing_wait = new_serial.closing_wait;
1355
1356 if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_HI)
1357 info->tty->alt_speed = 57600;
1358 if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_VHI)
1359 info->tty->alt_speed = 115200;
1360 if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_SHI)
1361 info->tty->alt_speed = 230400;
1362 if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_WARP)
1363 info->tty->alt_speed = 460800;
1364
1365 configure_r_port(info, NULL);
1366 return 0;
1367}
1368
1369/*
1370 * This function fills in a rocket_ports struct with information
1371 * about what boards/ports are in the system. This info is passed
1372 * to user space. See setrocket.c where the info is used to create
1373 * the /dev/ttyRx ports.
1374 */
1375static int get_ports(struct r_port *info, struct rocket_ports __user *retports)
1376{
1377 struct rocket_ports tmp;
1378 int board;
1379
1380 if (!retports)
1381 return -EFAULT;
1382 memset(&tmp, 0, sizeof (tmp));
1383 tmp.tty_major = rocket_driver->major;
1384
1385 for (board = 0; board < 4; board++) {
1386 tmp.rocketModel[board].model = rocketModel[board].model;
1387 strcpy(tmp.rocketModel[board].modelString, rocketModel[board].modelString);
1388 tmp.rocketModel[board].numPorts = rocketModel[board].numPorts;
1389 tmp.rocketModel[board].loadrm2 = rocketModel[board].loadrm2;
1390 tmp.rocketModel[board].startingPortNumber = rocketModel[board].startingPortNumber;
1391 }
1392 if (copy_to_user(retports, &tmp, sizeof (*retports)))
1393 return -EFAULT;
1394 return 0;
1395}
1396
1397static int reset_rm2(struct r_port *info, void __user *arg)
1398{
1399 int reset;
1400
1401 if (copy_from_user(&reset, arg, sizeof (int)))
1402 return -EFAULT;
1403 if (reset)
1404 reset = 1;
1405
1406 if (rcktpt_type[info->board] != ROCKET_TYPE_MODEMII &&
1407 rcktpt_type[info->board] != ROCKET_TYPE_MODEMIII)
1408 return -EINVAL;
1409
1410 if (info->ctlp->BusType == isISA)
1411 sModemReset(info->ctlp, info->chan, reset);
1412 else
1413 sPCIModemReset(info->ctlp, info->chan, reset);
1414
1415 return 0;
1416}
1417
1418static int get_version(struct r_port *info, struct rocket_version __user *retvers)
1419{
1420 if (copy_to_user(retvers, &driver_version, sizeof (*retvers)))
1421 return -EFAULT;
1422 return 0;
1423}
1424
1425/* IOCTL call handler into the driver */
1426static int rp_ioctl(struct tty_struct *tty, struct file *file,
1427 unsigned int cmd, unsigned long arg)
1428{
1429 struct r_port *info = (struct r_port *) tty->driver_data;
1430 void __user *argp = (void __user *)arg;
1431
1432 if (cmd != RCKP_GET_PORTS && rocket_paranoia_check(info, "rp_ioctl"))
1433 return -ENXIO;
1434
1435 switch (cmd) {
1436 case RCKP_GET_STRUCT:
1437 if (copy_to_user(argp, info, sizeof (struct r_port)))
1438 return -EFAULT;
1439 return 0;
1440 case RCKP_GET_CONFIG:
1441 return get_config(info, argp);
1442 case RCKP_SET_CONFIG:
1443 return set_config(info, argp);
1444 case RCKP_GET_PORTS:
1445 return get_ports(info, argp);
1446 case RCKP_RESET_RM2:
1447 return reset_rm2(info, argp);
1448 case RCKP_GET_VERSION:
1449 return get_version(info, argp);
1450 default:
1451 return -ENOIOCTLCMD;
1452 }
1453 return 0;
1454}
1455
1456static void rp_send_xchar(struct tty_struct *tty, char ch)
1457{
1458 struct r_port *info = (struct r_port *) tty->driver_data;
1459 CHANNEL_t *cp;
1460
1461 if (rocket_paranoia_check(info, "rp_send_xchar"))
1462 return;
1463
1464 cp = &info->channel;
1465 if (sGetTxCnt(cp))
1466 sWriteTxPrioByte(cp, ch);
1467 else
1468 sWriteTxByte(sGetTxRxDataIO(cp), ch);
1469}
1470
1471static void rp_throttle(struct tty_struct *tty)
1472{
1473 struct r_port *info = (struct r_port *) tty->driver_data;
1474 CHANNEL_t *cp;
1475
1476#ifdef ROCKET_DEBUG_THROTTLE
1477 printk(KERN_INFO "throttle %s: %d....\n", tty->name,
1478 tty->ldisc.chars_in_buffer(tty));
1479#endif
1480
1481 if (rocket_paranoia_check(info, "rp_throttle"))
1482 return;
1483
1484 cp = &info->channel;
1485 if (I_IXOFF(tty))
1486 rp_send_xchar(tty, STOP_CHAR(tty));
1487
1488 sClrRTS(&info->channel);
1489}
1490
1491static void rp_unthrottle(struct tty_struct *tty)
1492{
1493 struct r_port *info = (struct r_port *) tty->driver_data;
1494 CHANNEL_t *cp;
1495#ifdef ROCKET_DEBUG_THROTTLE
1496 printk(KERN_INFO "unthrottle %s: %d....\n", tty->name,
1497 tty->ldisc.chars_in_buffer(tty));
1498#endif
1499
1500 if (rocket_paranoia_check(info, "rp_throttle"))
1501 return;
1502
1503 cp = &info->channel;
1504 if (I_IXOFF(tty))
1505 rp_send_xchar(tty, START_CHAR(tty));
1506
1507 sSetRTS(&info->channel);
1508}
1509
1510/*
1511 * ------------------------------------------------------------
1512 * rp_stop() and rp_start()
1513 *
1514 * This routines are called before setting or resetting tty->stopped.
1515 * They enable or disable transmitter interrupts, as necessary.
1516 * ------------------------------------------------------------
1517 */
1518static void rp_stop(struct tty_struct *tty)
1519{
1520 struct r_port *info = (struct r_port *) tty->driver_data;
1521
1522#ifdef ROCKET_DEBUG_FLOW
1523 printk(KERN_INFO "stop %s: %d %d....\n", tty->name,
1524 info->xmit_cnt, info->xmit_fifo_room);
1525#endif
1526
1527 if (rocket_paranoia_check(info, "rp_stop"))
1528 return;
1529
1530 if (sGetTxCnt(&info->channel))
1531 sDisTransmit(&info->channel);
1532}
1533
1534static void rp_start(struct tty_struct *tty)
1535{
1536 struct r_port *info = (struct r_port *) tty->driver_data;
1537
1538#ifdef ROCKET_DEBUG_FLOW
1539 printk(KERN_INFO "start %s: %d %d....\n", tty->name,
1540 info->xmit_cnt, info->xmit_fifo_room);
1541#endif
1542
1543 if (rocket_paranoia_check(info, "rp_stop"))
1544 return;
1545
1546 sEnTransmit(&info->channel);
1547 set_bit((info->aiop * 8) + info->chan,
1548 (void *) &xmit_flags[info->board]);
1549}
1550
1551/*
1552 * rp_wait_until_sent() --- wait until the transmitter is empty
1553 */
1554static void rp_wait_until_sent(struct tty_struct *tty, int timeout)
1555{
1556 struct r_port *info = (struct r_port *) tty->driver_data;
1557 CHANNEL_t *cp;
1558 unsigned long orig_jiffies;
1559 int check_time, exit_time;
1560 int txcnt;
1561
1562 if (rocket_paranoia_check(info, "rp_wait_until_sent"))
1563 return;
1564
1565 cp = &info->channel;
1566
1567 orig_jiffies = jiffies;
1568#ifdef ROCKET_DEBUG_WAIT_UNTIL_SENT
1569 printk(KERN_INFO "In RP_wait_until_sent(%d) (jiff=%lu)...", timeout,
1570 jiffies);
1571 printk(KERN_INFO "cps=%d...", info->cps);
1572#endif
1573 while (1) {
1574 txcnt = sGetTxCnt(cp);
1575 if (!txcnt) {
1576 if (sGetChanStatusLo(cp) & TXSHRMT)
1577 break;
1578 check_time = (HZ / info->cps) / 5;
1579 } else {
1580 check_time = HZ * txcnt / info->cps;
1581 }
1582 if (timeout) {
1583 exit_time = orig_jiffies + timeout - jiffies;
1584 if (exit_time <= 0)
1585 break;
1586 if (exit_time < check_time)
1587 check_time = exit_time;
1588 }
1589 if (check_time == 0)
1590 check_time = 1;
1591#ifdef ROCKET_DEBUG_WAIT_UNTIL_SENT
1592 printk(KERN_INFO "txcnt = %d (jiff=%lu,check=%d)...", txcnt, jiffies, check_time);
1593#endif
1594 msleep_interruptible(jiffies_to_msecs(check_time));
1595 if (signal_pending(current))
1596 break;
1597 }
cc0a8fbb 1598 __set_current_state(TASK_RUNNING);
1da177e4
LT		 1599#ifdef ROCKET_DEBUG_WAIT_UNTIL_SENT
1600 printk(KERN_INFO "txcnt = %d (jiff=%lu)...done\n", txcnt, jiffies);
1601#endif
1602}
1603
1604/*
1605 * rp_hangup() --- called by tty_hangup() when a hangup is signaled.
1606 */
1607static void rp_hangup(struct tty_struct *tty)
1608{
1609 CHANNEL_t *cp;
1610 struct r_port *info = (struct r_port *) tty->driver_data;
1611
1612 if (rocket_paranoia_check(info, "rp_hangup"))
1613 return;
1614
1615#if (defined(ROCKET_DEBUG_OPEN) || defined(ROCKET_DEBUG_HANGUP))
1616 printk(KERN_INFO "rp_hangup of ttyR%d...", info->line);
1617#endif
1618 rp_flush_buffer(tty);
1619 if (info->flags & ROCKET_CLOSING)
1620 return;
1621 if (info->count)
1622 atomic_dec(&rp_num_ports_open);
1623 clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
1624
1625 info->count = 0;
1626 info->flags &= ~ROCKET_NORMAL_ACTIVE;
1627 info->tty = NULL;
1628
1629 cp = &info->channel;
1630 sDisRxFIFO(cp);
1631 sDisTransmit(cp);
1632 sDisInterrupts(cp, (TXINT_EN | MCINT_EN | RXINT_EN | SRCINT_EN | CHANINT_EN));
1633 sDisCTSFlowCtl(cp);
1634 sDisTxSoftFlowCtl(cp);
1635 sClrTxXOFF(cp);
1636 info->flags &= ~ROCKET_INITIALIZED;
1637
1638 wake_up_interruptible(&info->open_wait);
1639}
1640
1641/*
1642 * Exception handler - write char routine. The RocketPort driver uses a
1643 * double-buffering strategy, with the twist that if the in-memory CPU
1644 * buffer is empty, and there's space in the transmit FIFO, the
1645 * writing routines will write directly to transmit FIFO.
1646 * Write buffer and counters protected by spinlocks
1647 */
1648static void rp_put_char(struct tty_struct *tty, unsigned char ch)
1649{
1650 struct r_port *info = (struct r_port *) tty->driver_data;
1651 CHANNEL_t *cp;
1652 unsigned long flags;
1653
1654 if (rocket_paranoia_check(info, "rp_put_char"))
1655 return;
1656
69f545ea
MK		 1657 /*
1658 * Grab the port write mutex, locking out other processes that try to
1659 * write to this port
1660 */
1661 mutex_lock(&info->write_mtx);
1da177e4
LT		 1662
1663#ifdef ROCKET_DEBUG_WRITE
1664 printk(KERN_INFO "rp_put_char %c...", ch);
1665#endif
1666
1667 spin_lock_irqsave(&info->slock, flags);
1668 cp = &info->channel;
1669
1670 if (!tty->stopped && !tty->hw_stopped && info->xmit_fifo_room == 0)
1671 info->xmit_fifo_room = TXFIFO_SIZE - sGetTxCnt(cp);
1672
1673 if (tty->stopped || tty->hw_stopped || info->xmit_fifo_room == 0 || info->xmit_cnt != 0) {
1674 info->xmit_buf[info->xmit_head++] = ch;
1675 info->xmit_head &= XMIT_BUF_SIZE - 1;
1676 info->xmit_cnt++;
1677 set_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
1678 } else {
1679 sOutB(sGetTxRxDataIO(cp), ch);
1680 info->xmit_fifo_room--;
1681 }
1682 spin_unlock_irqrestore(&info->slock, flags);
69f545ea 1683 mutex_unlock(&info->write_mtx);
1da177e4
LT		 1684}
1685
1686/*
1687 * Exception handler - write routine, called when user app writes to the device.
69f545ea 1688 * A per port write mutex is used to protect from another process writing to
1da177e4
LT		 1689 * this port at the same time. This other process could be running on the other CPU
1690 * or get control of the CPU if the copy_from_user() blocks due to a page fault (swapped out).
1691 * Spinlocks protect the info xmit members.
1692 */
1693static int rp_write(struct tty_struct *tty,
1694 const unsigned char *buf, int count)
1695{
1696 struct r_port *info = (struct r_port *) tty->driver_data;
1697 CHANNEL_t *cp;
1698 const unsigned char *b;
1699 int c, retval = 0;
1700 unsigned long flags;
1701
1702 if (count <= 0 || rocket_paranoia_check(info, "rp_write"))
1703 return 0;
1704
69f545ea 1705 mutex_lock_interruptible(&info->write_mtx);
1da177e4
LT		 1706
1707#ifdef ROCKET_DEBUG_WRITE
1708 printk(KERN_INFO "rp_write %d chars...", count);
1709#endif
1710 cp = &info->channel;
1711
1712 if (!tty->stopped && !tty->hw_stopped && info->xmit_fifo_room < count)
1713 info->xmit_fifo_room = TXFIFO_SIZE - sGetTxCnt(cp);
1714
1715 /*
1716 * If the write queue for the port is empty, and there is FIFO space, stuff bytes
1717 * into FIFO. Use the write queue for temp storage.
1718 */
1719 if (!tty->stopped && !tty->hw_stopped && info->xmit_cnt == 0 && info->xmit_fifo_room > 0) {
1720 c = min(count, info->xmit_fifo_room);
1721 b = buf;
1722
1723 /* Push data into FIFO, 2 bytes at a time */
1724 sOutStrW(sGetTxRxDataIO(cp), (unsigned short *) b, c / 2);
1725
1726 /* If there is a byte remaining, write it */
1727 if (c & 1)
1728 sOutB(sGetTxRxDataIO(cp), b[c - 1]);
1729
1730 retval += c;
1731 buf += c;
1732 count -= c;
1733
1734 spin_lock_irqsave(&info->slock, flags);
1735 info->xmit_fifo_room -= c;
1736 spin_unlock_irqrestore(&info->slock, flags);
1737 }
1738
1739 /* If count is zero, we wrote it all and are done */
1740 if (!count)
1741 goto end;
1742
1743 /* Write remaining data into the port's xmit_buf */
1744 while (1) {
1745 if (info->tty == 0) /* Seemingly obligatory check... */
1746 goto end;
1747
1748 c = min(count, min(XMIT_BUF_SIZE - info->xmit_cnt - 1, XMIT_BUF_SIZE - info->xmit_head));
1749 if (c <= 0)
1750 break;
1751
1752 b = buf;
1753 memcpy(info->xmit_buf + info->xmit_head, b, c);
1754
1755 spin_lock_irqsave(&info->slock, flags);
1756 info->xmit_head =
1757 (info->xmit_head + c) & (XMIT_BUF_SIZE - 1);
1758 info->xmit_cnt += c;
1759 spin_unlock_irqrestore(&info->slock, flags);
1760
1761 buf += c;
1762 count -= c;
1763 retval += c;
1764 }
1765
1766 if ((retval > 0) && !tty->stopped && !tty->hw_stopped)
1767 set_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
1768
1769end:
1770 if (info->xmit_cnt < WAKEUP_CHARS) {
1771 tty_wakeup(tty);
1da177e4
LT		 1772#ifdef ROCKETPORT_HAVE_POLL_WAIT
1773 wake_up_interruptible(&tty->poll_wait);
1774#endif
1775 }
69f545ea 1776 mutex_unlock(&info->write_mtx);
1da177e4
LT		 1777 return retval;
1778}
1779
1780/*
1781 * Return the number of characters that can be sent. We estimate
1782 * only using the in-memory transmit buffer only, and ignore the
1783 * potential space in the transmit FIFO.
1784 */
1785static int rp_write_room(struct tty_struct *tty)
1786{
1787 struct r_port *info = (struct r_port *) tty->driver_data;
1788 int ret;
1789
1790 if (rocket_paranoia_check(info, "rp_write_room"))
1791 return 0;
1792
1793 ret = XMIT_BUF_SIZE - info->xmit_cnt - 1;
1794 if (ret < 0)
1795 ret = 0;
1796#ifdef ROCKET_DEBUG_WRITE
1797 printk(KERN_INFO "rp_write_room returns %d...", ret);
1798#endif
1799 return ret;
1800}
1801
1802/*
1803 * Return the number of characters in the buffer. Again, this only
1804 * counts those characters in the in-memory transmit buffer.
1805 */
1806static int rp_chars_in_buffer(struct tty_struct *tty)
1807{
1808 struct r_port *info = (struct r_port *) tty->driver_data;
1809 CHANNEL_t *cp;
1810
1811 if (rocket_paranoia_check(info, "rp_chars_in_buffer"))
1812 return 0;
1813
1814 cp = &info->channel;
1815
1816#ifdef ROCKET_DEBUG_WRITE
1817 printk(KERN_INFO "rp_chars_in_buffer returns %d...", info->xmit_cnt);
1818#endif
1819 return info->xmit_cnt;
1820}
1821
1822/*
1823 * Flushes the TX fifo for a port, deletes data in the xmit_buf stored in the
1824 * r_port struct for the port. Note that spinlock are used to protect info members,
1825 * do not call this function if the spinlock is already held.
1826 */
1827static void rp_flush_buffer(struct tty_struct *tty)
1828{
1829 struct r_port *info = (struct r_port *) tty->driver_data;
1830 CHANNEL_t *cp;
1831 unsigned long flags;
1832
1833 if (rocket_paranoia_check(info, "rp_flush_buffer"))
1834 return;
1835
1836 spin_lock_irqsave(&info->slock, flags);
1837 info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
1838 spin_unlock_irqrestore(&info->slock, flags);
1839
1da177e4
LT		 1840#ifdef ROCKETPORT_HAVE_POLL_WAIT
1841 wake_up_interruptible(&tty->poll_wait);
1842#endif
1843 tty_wakeup(tty);
1844
1845 cp = &info->channel;
1846 sFlushTxFIFO(cp);
1847}
1848
1849#ifdef CONFIG_PCI
1850
8d5916d3
JS		 1851static struct pci_device_id __devinitdata rocket_pci_ids[] = {
1852 { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_ANY_ID) },
1853 { }
1854};
1855MODULE_DEVICE_TABLE(pci, rocket_pci_ids);
1856
1da177e4
LT		 1857/*
1858 * Called when a PCI card is found. Retrieves and stores model information,
1859 * init's aiopic and serial port hardware.
1860 * Inputs: i is the board number (0-n)
1861 */
f15313bf 1862static __init int register_PCI(int i, struct pci_dev *dev)
1da177e4
LT		 1863{
1864 int num_aiops, aiop, max_num_aiops, num_chan, chan;
1865 unsigned int aiopio[MAX_AIOPS_PER_BOARD];
1866 char *str, *board_type;
1867 CONTROLLER_t *ctlp;
1868
1869 int fast_clock = 0;
1870 int altChanRingIndicator = 0;
1871 int ports_per_aiop = 8;
1872 int ret;
1873 unsigned int class_rev;
1874 WordIO_t ConfigIO = 0;
1875 ByteIO_t UPCIRingInd = 0;
1876
1877 if (!dev || pci_enable_device(dev))
1878 return 0;
1879
1880 rcktpt_io_addr[i] = pci_resource_start(dev, 0);
1881 ret = pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
1882
1883 if (ret) {
1884 printk(KERN_INFO " Error during register_PCI(), unable to read config dword \n");
1885 return 0;
1886 }
1887
1888 rcktpt_type[i] = ROCKET_TYPE_NORMAL;
1889 rocketModel[i].loadrm2 = 0;
1890 rocketModel[i].startingPortNumber = nextLineNumber;
1891
1892 /* Depending on the model, set up some config variables */
1893 switch (dev->device) {
1894 case PCI_DEVICE_ID_RP4QUAD:
1895 str = "Quadcable";
1896 max_num_aiops = 1;
1897 ports_per_aiop = 4;
1898 rocketModel[i].model = MODEL_RP4QUAD;
1899 strcpy(rocketModel[i].modelString, "RocketPort 4 port w/quad cable");
1900 rocketModel[i].numPorts = 4;
1901 break;
1902 case PCI_DEVICE_ID_RP8OCTA:
1903 str = "Octacable";
1904 max_num_aiops = 1;
1905 rocketModel[i].model = MODEL_RP8OCTA;
1906 strcpy(rocketModel[i].modelString, "RocketPort 8 port w/octa cable");
1907 rocketModel[i].numPorts = 8;
1908 break;
1909 case PCI_DEVICE_ID_URP8OCTA:
1910 str = "Octacable";
1911 max_num_aiops = 1;
1912 rocketModel[i].model = MODEL_UPCI_RP8OCTA;
1913 strcpy(rocketModel[i].modelString, "RocketPort UPCI 8 port w/octa cable");
1914 rocketModel[i].numPorts = 8;
1915 break;
1916 case PCI_DEVICE_ID_RP8INTF:
1917 str = "8";
1918 max_num_aiops = 1;
1919 rocketModel[i].model = MODEL_RP8INTF;
1920 strcpy(rocketModel[i].modelString, "RocketPort 8 port w/external I/F");
1921 rocketModel[i].numPorts = 8;
1922 break;
1923 case PCI_DEVICE_ID_URP8INTF:
1924 str = "8";
1925 max_num_aiops = 1;
1926 rocketModel[i].model = MODEL_UPCI_RP8INTF;
1927 strcpy(rocketModel[i].modelString, "RocketPort UPCI 8 port w/external I/F");
1928 rocketModel[i].numPorts = 8;
1929 break;
1930 case PCI_DEVICE_ID_RP8J:
1931 str = "8J";
1932 max_num_aiops = 1;
1933 rocketModel[i].model = MODEL_RP8J;
1934 strcpy(rocketModel[i].modelString, "RocketPort 8 port w/RJ11 connectors");
1935 rocketModel[i].numPorts = 8;
1936 break;
1937 case PCI_DEVICE_ID_RP4J:
1938 str = "4J";
1939 max_num_aiops = 1;
1940 ports_per_aiop = 4;
1941 rocketModel[i].model = MODEL_RP4J;
1942 strcpy(rocketModel[i].modelString, "RocketPort 4 port w/RJ45 connectors");
1943 rocketModel[i].numPorts = 4;
1944 break;
1945 case PCI_DEVICE_ID_RP8SNI:
1946 str = "8 (DB78 Custom)";
1947 max_num_aiops = 1;
1948 rocketModel[i].model = MODEL_RP8SNI;
1949 strcpy(rocketModel[i].modelString, "RocketPort 8 port w/ custom DB78");
1950 rocketModel[i].numPorts = 8;
1951 break;
1952 case PCI_DEVICE_ID_RP16SNI:
1953 str = "16 (DB78 Custom)";
1954 max_num_aiops = 2;
1955 rocketModel[i].model = MODEL_RP16SNI;
1956 strcpy(rocketModel[i].modelString, "RocketPort 16 port w/ custom DB78");
1957 rocketModel[i].numPorts = 16;
1958 break;
1959 case PCI_DEVICE_ID_RP16INTF:
1960 str = "16";
1961 max_num_aiops = 2;
1962 rocketModel[i].model = MODEL_RP16INTF;
1963 strcpy(rocketModel[i].modelString, "RocketPort 16 port w/external I/F");
1964 rocketModel[i].numPorts = 16;
1965 break;
1966 case PCI_DEVICE_ID_URP16INTF:
1967 str = "16";
1968 max_num_aiops = 2;
1969 rocketModel[i].model = MODEL_UPCI_RP16INTF;
1970 strcpy(rocketModel[i].modelString, "RocketPort UPCI 16 port w/external I/F");
1971 rocketModel[i].numPorts = 16;
1972 break;
1973 case PCI_DEVICE_ID_CRP16INTF:
1974 str = "16";
1975 max_num_aiops = 2;
1976 rocketModel[i].model = MODEL_CPCI_RP16INTF;
1977 strcpy(rocketModel[i].modelString, "RocketPort Compact PCI 16 port w/external I/F");
1978 rocketModel[i].numPorts = 16;
1979 break;
1980 case PCI_DEVICE_ID_RP32INTF:
1981 str = "32";
1982 max_num_aiops = 4;
1983 rocketModel[i].model = MODEL_RP32INTF;
1984 strcpy(rocketModel[i].modelString, "RocketPort 32 port w/external I/F");
1985 rocketModel[i].numPorts = 32;
1986 break;
1987 case PCI_DEVICE_ID_URP32INTF:
1988 str = "32";
1989 max_num_aiops = 4;
1990 rocketModel[i].model = MODEL_UPCI_RP32INTF;
1991 strcpy(rocketModel[i].modelString, "RocketPort UPCI 32 port w/external I/F");
1992 rocketModel[i].numPorts = 32;
1993 break;
1994 case PCI_DEVICE_ID_RPP4:
1995 str = "Plus Quadcable";
1996 max_num_aiops = 1;
1997 ports_per_aiop = 4;
1998 altChanRingIndicator++;
1999 fast_clock++;
2000 rocketModel[i].model = MODEL_RPP4;
2001 strcpy(rocketModel[i].modelString, "RocketPort Plus 4 port");
2002 rocketModel[i].numPorts = 4;
2003 break;
2004 case PCI_DEVICE_ID_RPP8:
2005 str = "Plus Octacable";
2006 max_num_aiops = 2;
2007 ports_per_aiop = 4;
2008 altChanRingIndicator++;
2009 fast_clock++;
2010 rocketModel[i].model = MODEL_RPP8;
2011 strcpy(rocketModel[i].modelString, "RocketPort Plus 8 port");
2012 rocketModel[i].numPorts = 8;
2013 break;
2014 case PCI_DEVICE_ID_RP2_232:
2015 str = "Plus 2 (RS-232)";
2016 max_num_aiops = 1;
2017 ports_per_aiop = 2;
2018 altChanRingIndicator++;
2019 fast_clock++;
2020 rocketModel[i].model = MODEL_RP2_232;
2021 strcpy(rocketModel[i].modelString, "RocketPort Plus 2 port RS232");
2022 rocketModel[i].numPorts = 2;
2023 break;
2024 case PCI_DEVICE_ID_RP2_422:
2025 str = "Plus 2 (RS-422)";
2026 max_num_aiops = 1;
2027 ports_per_aiop = 2;
2028 altChanRingIndicator++;
2029 fast_clock++;
2030 rocketModel[i].model = MODEL_RP2_422;
2031 strcpy(rocketModel[i].modelString, "RocketPort Plus 2 port RS422");
2032 rocketModel[i].numPorts = 2;
2033 break;
2034 case PCI_DEVICE_ID_RP6M:
2035
2036 max_num_aiops = 1;
2037 ports_per_aiop = 6;
2038 str = "6-port";
2039
2040 /* If class_rev is 1, the rocketmodem flash must be loaded. If it is 2 it is a "socketed" version. */
2041 if ((class_rev & 0xFF) == 1) {
2042 rcktpt_type[i] = ROCKET_TYPE_MODEMII;
2043 rocketModel[i].loadrm2 = 1;
2044 } else {
2045 rcktpt_type[i] = ROCKET_TYPE_MODEM;
2046 }
2047
2048 rocketModel[i].model = MODEL_RP6M;
2049 strcpy(rocketModel[i].modelString, "RocketModem 6 port");
2050 rocketModel[i].numPorts = 6;
2051 break;
2052 case PCI_DEVICE_ID_RP4M:
2053 max_num_aiops = 1;
2054 ports_per_aiop = 4;
2055 str = "4-port";
2056 if ((class_rev & 0xFF) == 1) {
2057 rcktpt_type[i] = ROCKET_TYPE_MODEMII;
2058 rocketModel[i].loadrm2 = 1;
2059 } else {
2060 rcktpt_type[i] = ROCKET_TYPE_MODEM;
2061 }
2062
2063 rocketModel[i].model = MODEL_RP4M;
2064 strcpy(rocketModel[i].modelString, "RocketModem 4 port");
2065 rocketModel[i].numPorts = 4;
2066 break;
2067 default:
2068 str = "(unknown/unsupported)";
2069 max_num_aiops = 0;
2070 break;
2071 }
2072
2073 /*
2074 * Check for UPCI boards.
2075 */
2076
2077 switch (dev->device) {
2078 case PCI_DEVICE_ID_URP32INTF:
2079 case PCI_DEVICE_ID_URP8INTF:
2080 case PCI_DEVICE_ID_URP16INTF:
2081 case PCI_DEVICE_ID_CRP16INTF:
2082 case PCI_DEVICE_ID_URP8OCTA:
2083 rcktpt_io_addr[i] = pci_resource_start(dev, 2);
2084 ConfigIO = pci_resource_start(dev, 1);
2085 if (dev->device == PCI_DEVICE_ID_URP8OCTA) {
2086 UPCIRingInd = rcktpt_io_addr[i] + _PCI_9030_RING_IND;
2087
2088 /*
2089 * Check for octa or quad cable.
2090 */
2091 if (!
2092 (sInW(ConfigIO + _PCI_9030_GPIO_CTRL) &
2093 PCI_GPIO_CTRL_8PORT)) {
2094 str = "Quadcable";
2095 ports_per_aiop = 4;
2096 rocketModel[i].numPorts = 4;
2097 }
2098 }
2099 break;
2100 case PCI_DEVICE_ID_UPCI_RM3_8PORT:
2101 str = "8 ports";
2102 max_num_aiops = 1;
2103 rocketModel[i].model = MODEL_UPCI_RM3_8PORT;
2104 strcpy(rocketModel[i].modelString, "RocketModem III 8 port");
2105 rocketModel[i].numPorts = 8;
2106 rcktpt_io_addr[i] = pci_resource_start(dev, 2);
2107 UPCIRingInd = rcktpt_io_addr[i] + _PCI_9030_RING_IND;
2108 ConfigIO = pci_resource_start(dev, 1);
2109 rcktpt_type[i] = ROCKET_TYPE_MODEMIII;
2110 break;
2111 case PCI_DEVICE_ID_UPCI_RM3_4PORT:
2112 str = "4 ports";
2113 max_num_aiops = 1;
2114 rocketModel[i].model = MODEL_UPCI_RM3_4PORT;
2115 strcpy(rocketModel[i].modelString, "RocketModem III 4 port");
2116 rocketModel[i].numPorts = 4;
2117 rcktpt_io_addr[i] = pci_resource_start(dev, 2);
2118 UPCIRingInd = rcktpt_io_addr[i] + _PCI_9030_RING_IND;
2119 ConfigIO = pci_resource_start(dev, 1);
2120 rcktpt_type[i] = ROCKET_TYPE_MODEMIII;
2121 break;
2122 default:
2123 break;
2124 }
2125
2126 switch (rcktpt_type[i]) {
2127 case ROCKET_TYPE_MODEM:
2128 board_type = "RocketModem";
2129 break;
2130 case ROCKET_TYPE_MODEMII:
2131 board_type = "RocketModem II";
2132 break;
2133 case ROCKET_TYPE_MODEMIII:
2134 board_type = "RocketModem III";
2135 break;
2136 default:
2137 board_type = "RocketPort";
2138 break;
2139 }
2140
2141 if (fast_clock) {
2142 sClockPrescale = 0x12; /* mod 2 (divide by 3) */
2143 rp_baud_base[i] = 921600;
2144 } else {
2145 /*
2146 * If support_low_speed is set, use the slow clock
2147 * prescale, which supports 50 bps
2148 */
2149 if (support_low_speed) {
2150 /* mod 9 (divide by 10) prescale */
2151 sClockPrescale = 0x19;
2152 rp_baud_base[i] = 230400;
2153 } else {
2154 /* mod 4 (devide by 5) prescale */
2155 sClockPrescale = 0x14;
2156 rp_baud_base[i] = 460800;
2157 }
2158 }
2159
2160 for (aiop = 0; aiop < max_num_aiops; aiop++)
2161 aiopio[aiop] = rcktpt_io_addr[i] + (aiop * 0x40);
2162 ctlp = sCtlNumToCtlPtr(i);
2163 num_aiops = sPCIInitController(ctlp, i, aiopio, max_num_aiops, ConfigIO, 0, FREQ_DIS, 0, altChanRingIndicator, UPCIRingInd);
2164 for (aiop = 0; aiop < max_num_aiops; aiop++)
2165 ctlp->AiopNumChan[aiop] = ports_per_aiop;
2166
2167 printk("Comtrol PCI controller #%d ID 0x%x found in bus:slot:fn %s at address %04lx, "
2168 "%d AIOP(s) (%s)\n", i, dev->device, pci_name(dev),
2169 rcktpt_io_addr[i], num_aiops, rocketModel[i].modelString);
2170 printk(KERN_INFO "Installing %s, creating /dev/ttyR%d - %ld\n",
2171 rocketModel[i].modelString,
2172 rocketModel[i].startingPortNumber,
2173 rocketModel[i].startingPortNumber +
2174 rocketModel[i].numPorts - 1);
2175
2176 if (num_aiops <= 0) {
2177 rcktpt_io_addr[i] = 0;
2178 return (0);
2179 }
2180 is_PCI[i] = 1;
2181
2182 /* Reset the AIOPIC, init the serial ports */
2183 for (aiop = 0; aiop < num_aiops; aiop++) {
2184 sResetAiopByNum(ctlp, aiop);
2185 num_chan = ports_per_aiop;
2186 for (chan = 0; chan < num_chan; chan++)
2187 init_r_port(i, aiop, chan, dev);
2188 }
2189
2190 /* Rocket modems must be reset */
2191 if ((rcktpt_type[i] == ROCKET_TYPE_MODEM) ||
2192 (rcktpt_type[i] == ROCKET_TYPE_MODEMII) ||
2193 (rcktpt_type[i] == ROCKET_TYPE_MODEMIII)) {
2194 num_chan = ports_per_aiop;
2195 for (chan = 0; chan < num_chan; chan++)
2196 sPCIModemReset(ctlp, chan, 1);
2197 mdelay(500);
2198 for (chan = 0; chan < num_chan; chan++)
2199 sPCIModemReset(ctlp, chan, 0);
2200 mdelay(500);
2201 rmSpeakerReset(ctlp, rocketModel[i].model);
2202 }
2203 return (1);
2204}
2205
2206/*
2207 * Probes for PCI cards, inits them if found
2208 * Input: board_found = number of ISA boards already found, or the
2209 * starting board number
2210 * Returns: Number of PCI boards found
2211 */
2212static int __init init_PCI(int boards_found)
2213{
2214 struct pci_dev *dev = NULL;
2215 int count = 0;
2216
2217 /* Work through the PCI device list, pulling out ours */
606d099c 2218 while ((dev = pci_get_device(PCI_VENDOR_ID_RP, PCI_ANY_ID, dev))) {
1da177e4
LT		 2219 if (register_PCI(count + boards_found, dev))
2220 count++;
2221 }
2222 return (count);
2223}
2224
2225#endif /* CONFIG_PCI */
2226
2227/*
2228 * Probes for ISA cards
2229 * Input: i = the board number to look for
2230 * Returns: 1 if board found, 0 else
2231 */
2232static int __init init_ISA(int i)
2233{
2234 int num_aiops, num_chan = 0, total_num_chan = 0;
2235 int aiop, chan;
2236 unsigned int aiopio[MAX_AIOPS_PER_BOARD];
2237 CONTROLLER_t *ctlp;
2238 char *type_string;
2239
2240 /* If io_addr is zero, no board configured */
2241 if (rcktpt_io_addr[i] == 0)
2242 return (0);
2243
2244 /* Reserve the IO region */
2245 if (!request_region(rcktpt_io_addr[i], 64, "Comtrol RocketPort")) {
2246 printk(KERN_INFO "Unable to reserve IO region for configured ISA RocketPort at address 0x%lx, board not installed...\n", rcktpt_io_addr[i]);
2247 rcktpt_io_addr[i] = 0;
2248 return (0);
2249 }
2250
2251 ctlp = sCtlNumToCtlPtr(i);
2252
2253 ctlp->boardType = rcktpt_type[i];
2254
2255 switch (rcktpt_type[i]) {
2256 case ROCKET_TYPE_PC104:
2257 type_string = "(PC104)";
2258 break;
2259 case ROCKET_TYPE_MODEM:
2260 type_string = "(RocketModem)";
2261 break;
2262 case ROCKET_TYPE_MODEMII:
2263 type_string = "(RocketModem II)";
2264 break;
2265 default:
2266 type_string = "";
2267 break;
2268 }
2269
2270 /*
2271 * If support_low_speed is set, use the slow clock prescale,
2272 * which supports 50 bps
2273 */
2274 if (support_low_speed) {
2275 sClockPrescale = 0x19; /* mod 9 (divide by 10) prescale */
2276 rp_baud_base[i] = 230400;
2277 } else {
2278 sClockPrescale = 0x14; /* mod 4 (devide by 5) prescale */
2279 rp_baud_base[i] = 460800;
2280 }
2281
2282 for (aiop = 0; aiop < MAX_AIOPS_PER_BOARD; aiop++)
2283 aiopio[aiop] = rcktpt_io_addr[i] + (aiop * 0x400);
2284
2285 num_aiops = sInitController(ctlp, i, controller + (i * 0x400), aiopio, MAX_AIOPS_PER_BOARD, 0, FREQ_DIS, 0);
2286
2287 if (ctlp->boardType == ROCKET_TYPE_PC104) {
2288 sEnAiop(ctlp, 2); /* only one AIOPIC, but these */
2289 sEnAiop(ctlp, 3); /* CSels used for other stuff */
2290 }
2291
2292 /* If something went wrong initing the AIOP's release the ISA IO memory */
2293 if (num_aiops <= 0) {
2294 release_region(rcktpt_io_addr[i], 64);
2295 rcktpt_io_addr[i] = 0;
2296 return (0);
2297 }
2298
2299 rocketModel[i].startingPortNumber = nextLineNumber;
2300
2301 for (aiop = 0; aiop < num_aiops; aiop++) {
2302 sResetAiopByNum(ctlp, aiop);
2303 sEnAiop(ctlp, aiop);
2304 num_chan = sGetAiopNumChan(ctlp, aiop);
2305 total_num_chan += num_chan;
2306 for (chan = 0; chan < num_chan; chan++)
2307 init_r_port(i, aiop, chan, NULL);
2308 }
2309 is_PCI[i] = 0;
2310 if ((rcktpt_type[i] == ROCKET_TYPE_MODEM) || (rcktpt_type[i] == ROCKET_TYPE_MODEMII)) {
2311 num_chan = sGetAiopNumChan(ctlp, 0);
2312 total_num_chan = num_chan;
2313 for (chan = 0; chan < num_chan; chan++)
2314 sModemReset(ctlp, chan, 1);
2315 mdelay(500);
2316 for (chan = 0; chan < num_chan; chan++)
2317 sModemReset(ctlp, chan, 0);
2318 mdelay(500);
2319 strcpy(rocketModel[i].modelString, "RocketModem ISA");
2320 } else {
2321 strcpy(rocketModel[i].modelString, "RocketPort ISA");
2322 }
2323 rocketModel[i].numPorts = total_num_chan;
2324 rocketModel[i].model = MODEL_ISA;
2325
2326 printk(KERN_INFO "RocketPort ISA card #%d found at 0x%lx - %d AIOPs %s\n",
2327 i, rcktpt_io_addr[i], num_aiops, type_string);
2328
2329 printk(KERN_INFO "Installing %s, creating /dev/ttyR%d - %ld\n",
2330 rocketModel[i].modelString,
2331 rocketModel[i].startingPortNumber,
2332 rocketModel[i].startingPortNumber +
2333 rocketModel[i].numPorts - 1);
2334
2335 return (1);
2336}
2337
b68e31d0 2338static const struct tty_operations rocket_ops = {
1da177e4
LT		 2339 .open = rp_open,
2340 .close = rp_close,
2341 .write = rp_write,
2342 .put_char = rp_put_char,
2343 .write_room = rp_write_room,
2344 .chars_in_buffer = rp_chars_in_buffer,
2345 .flush_buffer = rp_flush_buffer,
2346 .ioctl = rp_ioctl,
2347 .throttle = rp_throttle,
2348 .unthrottle = rp_unthrottle,
2349 .set_termios = rp_set_termios,
2350 .stop = rp_stop,
2351 .start = rp_start,
2352 .hangup = rp_hangup,
2353 .break_ctl = rp_break,
2354 .send_xchar = rp_send_xchar,
2355 .wait_until_sent = rp_wait_until_sent,
2356 .tiocmget = rp_tiocmget,
2357 .tiocmset = rp_tiocmset,
2358};
2359
2360/*
2361 * The module "startup" routine; it's run when the module is loaded.
2362 */
d269cdd0 2363static int __init rp_init(void)
1da177e4
LT		 2364{
2365 int retval, pci_boards_found, isa_boards_found, i;
2366
2367 printk(KERN_INFO "RocketPort device driver module, version %s, %s\n",
2368 ROCKET_VERSION, ROCKET_DATE);
2369
2370 rocket_driver = alloc_tty_driver(MAX_RP_PORTS);
2371 if (!rocket_driver)
2372 return -ENOMEM;
2373
1da177e4
LT		 2374 /*
2375 * Initialize the array of pointers to our own internal state
2376 * structures.
2377 */
2378 memset(rp_table, 0, sizeof (rp_table));
2379 memset(xmit_flags, 0, sizeof (xmit_flags));
2380
2381 for (i = 0; i < MAX_RP_PORTS; i++)
2382 lineNumbers[i] = 0;
2383 nextLineNumber = 0;
2384 memset(rocketModel, 0, sizeof (rocketModel));
2385
2386 /*
2387 * If board 1 is non-zero, there is at least one ISA configured. If controller is
2388 * zero, use the default controller IO address of board1 + 0x40.
2389 */
2390 if (board1) {
2391 if (controller == 0)
2392 controller = board1 + 0x40;
2393 } else {
2394 controller = 0; /* Used as a flag, meaning no ISA boards */
2395 }
2396
2397 /* If an ISA card is configured, reserve the 4 byte IO space for the Mudbac controller */
2398 if (controller && (!request_region(controller, 4, "Comtrol RocketPort"))) {
2399 printk(KERN_INFO "Unable to reserve IO region for first configured ISA RocketPort controller 0x%lx. Driver exiting \n", controller);
2400 return -EBUSY;
2401 }
2402
2403 /* Store ISA variable retrieved from command line or .conf file. */
2404 rcktpt_io_addr[0] = board1;
2405 rcktpt_io_addr[1] = board2;
2406 rcktpt_io_addr[2] = board3;
2407 rcktpt_io_addr[3] = board4;
2408
2409 rcktpt_type[0] = modem1 ? ROCKET_TYPE_MODEM : ROCKET_TYPE_NORMAL;
2410 rcktpt_type[0] = pc104_1[0] ? ROCKET_TYPE_PC104 : rcktpt_type[0];
2411 rcktpt_type[1] = modem2 ? ROCKET_TYPE_MODEM : ROCKET_TYPE_NORMAL;
2412 rcktpt_type[1] = pc104_2[0] ? ROCKET_TYPE_PC104 : rcktpt_type[1];
2413 rcktpt_type[2] = modem3 ? ROCKET_TYPE_MODEM : ROCKET_TYPE_NORMAL;
2414 rcktpt_type[2] = pc104_3[0] ? ROCKET_TYPE_PC104 : rcktpt_type[2];
2415 rcktpt_type[3] = modem4 ? ROCKET_TYPE_MODEM : ROCKET_TYPE_NORMAL;
2416 rcktpt_type[3] = pc104_4[0] ? ROCKET_TYPE_PC104 : rcktpt_type[3];
2417
2418 /*
2419 * Set up the tty driver structure and then register this
2420 * driver with the tty layer.
2421 */
2422
2423 rocket_driver->owner = THIS_MODULE;
331b8319 2424 rocket_driver->flags = TTY_DRIVER_DYNAMIC_DEV;
1da177e4
LT		 2425 rocket_driver->name = "ttyR";
2426 rocket_driver->driver_name = "Comtrol RocketPort";
2427 rocket_driver->major = TTY_ROCKET_MAJOR;
2428 rocket_driver->minor_start = 0;
2429 rocket_driver->type = TTY_DRIVER_TYPE_SERIAL;
2430 rocket_driver->subtype = SERIAL_TYPE_NORMAL;
2431 rocket_driver->init_termios = tty_std_termios;
2432 rocket_driver->init_termios.c_cflag =
2433 B9600 | CS8 | CREAD | HUPCL | CLOCAL;
606d099c
AC		 2434 rocket_driver->init_termios.c_ispeed = 9600;
2435 rocket_driver->init_termios.c_ospeed = 9600;
1da177e4 2436#ifdef ROCKET_SOFT_FLOW
331b8319 2437 rocket_driver->flags |= TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
1da177e4
LT		 2438#endif
2439 tty_set_operations(rocket_driver, &rocket_ops);
2440
2441 retval = tty_register_driver(rocket_driver);
2442 if (retval < 0) {
2443 printk(KERN_INFO "Couldn't install tty RocketPort driver (error %d)\n", -retval);
2444 put_tty_driver(rocket_driver);
2445 return -1;
2446 }
2447
2448#ifdef ROCKET_DEBUG_OPEN
2449 printk(KERN_INFO "RocketPort driver is major %d\n", rocket_driver.major);
2450#endif
2451
2452 /*
2453 * OK, let's probe each of the controllers looking for boards. Any boards found
2454 * will be initialized here.
2455 */
2456 isa_boards_found = 0;
2457 pci_boards_found = 0;
2458
2459 for (i = 0; i < NUM_BOARDS; i++) {
2460 if (init_ISA(i))
2461 isa_boards_found++;
2462 }
2463
2464#ifdef CONFIG_PCI
2465 if (isa_boards_found < NUM_BOARDS)
2466 pci_boards_found = init_PCI(isa_boards_found);
2467#endif
2468
2469 max_board = pci_boards_found + isa_boards_found;
2470
2471 if (max_board == 0) {
2472 printk(KERN_INFO "No rocketport ports found; unloading driver.\n");
2473 del_timer_sync(&rocket_timer);
2474 tty_unregister_driver(rocket_driver);
2475 put_tty_driver(rocket_driver);
2476 return -ENXIO;
2477 }
2478
2479 return 0;
2480}
2481
1da177e4
LT		 2482
2483static void rp_cleanup_module(void)
2484{
2485 int retval;
2486 int i;
2487
2488 del_timer_sync(&rocket_timer);
2489
2490 retval = tty_unregister_driver(rocket_driver);
2491 if (retval)
2492 printk(KERN_INFO "Error %d while trying to unregister "
2493 "rocketport driver\n", -retval);
2494 put_tty_driver(rocket_driver);
2495
735d5661
JJ		 2496 for (i = 0; i < MAX_RP_PORTS; i++)
2497 kfree(rp_table[i]);
1da177e4
LT		 2498
2499 for (i = 0; i < NUM_BOARDS; i++) {
2500 if (rcktpt_io_addr[i] <= 0 || is_PCI[i])
2501 continue;
2502 release_region(rcktpt_io_addr[i], 64);
2503 }
2504 if (controller)
2505 release_region(controller, 4);
2506}
1da177e4 2507
1da177e4
LT		 2508/***************************************************************************
2509Function: sInitController
2510Purpose: Initialization of controller global registers and controller
2511 structure.
2512Call: sInitController(CtlP,CtlNum,MudbacIO,AiopIOList,AiopIOListSize,
2513 IRQNum,Frequency,PeriodicOnly)
2514 CONTROLLER_T *CtlP; Ptr to controller structure
2515 int CtlNum; Controller number
2516 ByteIO_t MudbacIO; Mudbac base I/O address.
2517 ByteIO_t *AiopIOList; List of I/O addresses for each AIOP.
2518 This list must be in the order the AIOPs will be found on the
2519 controller. Once an AIOP in the list is not found, it is
2520 assumed that there are no more AIOPs on the controller.
2521 int AiopIOListSize; Number of addresses in AiopIOList
2522 int IRQNum; Interrupt Request number. Can be any of the following:
2523 0: Disable global interrupts
2524 3: IRQ 3
2525 4: IRQ 4
2526 5: IRQ 5
2527 9: IRQ 9
2528 10: IRQ 10
2529 11: IRQ 11
2530 12: IRQ 12
2531 15: IRQ 15
2532 Byte_t Frequency: A flag identifying the frequency
2533 of the periodic interrupt, can be any one of the following:
2534 FREQ_DIS - periodic interrupt disabled
2535 FREQ_137HZ - 137 Hertz
2536 FREQ_69HZ - 69 Hertz
2537 FREQ_34HZ - 34 Hertz
2538 FREQ_17HZ - 17 Hertz
2539 FREQ_9HZ - 9 Hertz
2540 FREQ_4HZ - 4 Hertz
2541 If IRQNum is set to 0 the Frequency parameter is
2542 overidden, it is forced to a value of FREQ_DIS.
f15313bf 2543 int PeriodicOnly: 1 if all interrupts except the periodic
1da177e4 2544 interrupt are to be blocked.
f15313bf 2545 0 is both the periodic interrupt and
1da177e4
LT		 2546 other channel interrupts are allowed.
2547 If IRQNum is set to 0 the PeriodicOnly parameter is
f15313bf 2548 overidden, it is forced to a value of 0.
1da177e4
LT		 2549Return: int: Number of AIOPs on the controller, or CTLID_NULL if controller
2550 initialization failed.
2551
2552Comments:
2553 If periodic interrupts are to be disabled but AIOP interrupts
f15313bf 2554 are allowed, set Frequency to FREQ_DIS and PeriodicOnly to 0.
1da177e4
LT		 2555
2556 If interrupts are to be completely disabled set IRQNum to 0.
2557
f15313bf 2558 Setting Frequency to FREQ_DIS and PeriodicOnly to 1 is an
1da177e4
LT		 2559 invalid combination.
2560
2561 This function performs initialization of global interrupt modes,
2562 but it does not actually enable global interrupts. To enable
2563 and disable global interrupts use functions sEnGlobalInt() and
2564 sDisGlobalInt(). Enabling of global interrupts is normally not
2565 done until all other initializations are complete.
2566
2567 Even if interrupts are globally enabled, they must also be
2568 individually enabled for each channel that is to generate
2569 interrupts.
2570
2571Warnings: No range checking on any of the parameters is done.
2572
2573 No context switches are allowed while executing this function.
2574
2575 After this function all AIOPs on the controller are disabled,
2576 they can be enabled with sEnAiop().
2577*/
f15313bf
AB		 2578static int sInitController(CONTROLLER_T * CtlP, int CtlNum, ByteIO_t MudbacIO,
2579 ByteIO_t * AiopIOList, int AiopIOListSize,
2580 int IRQNum, Byte_t Frequency, int PeriodicOnly)
1da177e4
LT		 2581{
2582 int i;
2583 ByteIO_t io;
2584 int done;
2585
2586 CtlP->AiopIntrBits = aiop_intr_bits;
2587 CtlP->AltChanRingIndicator = 0;
2588 CtlP->CtlNum = CtlNum;
2589 CtlP->CtlID = CTLID_0001; /* controller release 1 */
2590 CtlP->BusType = isISA;
2591 CtlP->MBaseIO = MudbacIO;
2592 CtlP->MReg1IO = MudbacIO + 1;
2593 CtlP->MReg2IO = MudbacIO + 2;
2594 CtlP->MReg3IO = MudbacIO + 3;
2595#if 1
2596 CtlP->MReg2 = 0; /* interrupt disable */
2597 CtlP->MReg3 = 0; /* no periodic interrupts */
2598#else
2599 if (sIRQMap[IRQNum] == 0) { /* interrupts globally disabled */
2600 CtlP->MReg2 = 0; /* interrupt disable */
2601 CtlP->MReg3 = 0; /* no periodic interrupts */
2602 } else {
2603 CtlP->MReg2 = sIRQMap[IRQNum]; /* set IRQ number */
2604 CtlP->MReg3 = Frequency; /* set frequency */
2605 if (PeriodicOnly) { /* periodic interrupt only */
2606 CtlP->MReg3 |= PERIODIC_ONLY;
2607 }
2608 }
2609#endif
2610 sOutB(CtlP->MReg2IO, CtlP->MReg2);
2611 sOutB(CtlP->MReg3IO, CtlP->MReg3);
2612 sControllerEOI(CtlP); /* clear EOI if warm init */
2613 /* Init AIOPs */
2614 CtlP->NumAiop = 0;
2615 for (i = done = 0; i < AiopIOListSize; i++) {
2616 io = AiopIOList[i];
2617 CtlP->AiopIO[i] = (WordIO_t) io;
2618 CtlP->AiopIntChanIO[i] = io + _INT_CHAN;
2619 sOutB(CtlP->MReg2IO, CtlP->MReg2 | (i & 0x03)); /* AIOP index */
2620 sOutB(MudbacIO, (Byte_t) (io >> 6)); /* set up AIOP I/O in MUDBAC */
2621 if (done)
2622 continue;
2623 sEnAiop(CtlP, i); /* enable the AIOP */
2624 CtlP->AiopID[i] = sReadAiopID(io); /* read AIOP ID */
2625 if (CtlP->AiopID[i] == AIOPID_NULL) /* if AIOP does not exist */
2626 done = 1; /* done looking for AIOPs */
2627 else {
2628 CtlP->AiopNumChan[i] = sReadAiopNumChan((WordIO_t) io); /* num channels in AIOP */
2629 sOutW((WordIO_t) io + _INDX_ADDR, _CLK_PRE); /* clock prescaler */
2630 sOutB(io + _INDX_DATA, sClockPrescale);
2631 CtlP->NumAiop++; /* bump count of AIOPs */
2632 }
2633 sDisAiop(CtlP, i); /* disable AIOP */
2634 }
2635
2636 if (CtlP->NumAiop == 0)
2637 return (-1);
2638 else
2639 return (CtlP->NumAiop);
2640}
2641
2642/***************************************************************************
2643Function: sPCIInitController
2644Purpose: Initialization of controller global registers and controller
2645 structure.
2646Call: sPCIInitController(CtlP,CtlNum,AiopIOList,AiopIOListSize,
2647 IRQNum,Frequency,PeriodicOnly)
2648 CONTROLLER_T *CtlP; Ptr to controller structure
2649 int CtlNum; Controller number
2650 ByteIO_t *AiopIOList; List of I/O addresses for each AIOP.
2651 This list must be in the order the AIOPs will be found on the
2652 controller. Once an AIOP in the list is not found, it is
2653 assumed that there are no more AIOPs on the controller.
2654 int AiopIOListSize; Number of addresses in AiopIOList
2655 int IRQNum; Interrupt Request number. Can be any of the following:
2656 0: Disable global interrupts
2657 3: IRQ 3
2658 4: IRQ 4
2659 5: IRQ 5
2660 9: IRQ 9
2661 10: IRQ 10
2662 11: IRQ 11
2663 12: IRQ 12
2664 15: IRQ 15
2665 Byte_t Frequency: A flag identifying the frequency
2666 of the periodic interrupt, can be any one of the following:
2667 FREQ_DIS - periodic interrupt disabled
2668 FREQ_137HZ - 137 Hertz
2669 FREQ_69HZ - 69 Hertz
2670 FREQ_34HZ - 34 Hertz
2671 FREQ_17HZ - 17 Hertz
2672 FREQ_9HZ - 9 Hertz
2673 FREQ_4HZ - 4 Hertz
2674 If IRQNum is set to 0 the Frequency parameter is
2675 overidden, it is forced to a value of FREQ_DIS.
f15313bf 2676 int PeriodicOnly: 1 if all interrupts except the periodic
1da177e4 2677 interrupt are to be blocked.
f15313bf 2678 0 is both the periodic interrupt and
1da177e4
LT		 2679 other channel interrupts are allowed.
2680 If IRQNum is set to 0 the PeriodicOnly parameter is
f15313bf 2681 overidden, it is forced to a value of 0.
1da177e4
LT		 2682Return: int: Number of AIOPs on the controller, or CTLID_NULL if controller
2683 initialization failed.
2684
2685Comments:
2686 If periodic interrupts are to be disabled but AIOP interrupts
f15313bf 2687 are allowed, set Frequency to FREQ_DIS and PeriodicOnly to 0.
1da177e4
LT		 2688
2689 If interrupts are to be completely disabled set IRQNum to 0.
2690
f15313bf 2691 Setting Frequency to FREQ_DIS and PeriodicOnly to 1 is an
1da177e4
LT		 2692 invalid combination.
2693
2694 This function performs initialization of global interrupt modes,
2695 but it does not actually enable global interrupts. To enable
2696 and disable global interrupts use functions sEnGlobalInt() and
2697 sDisGlobalInt(). Enabling of global interrupts is normally not
2698 done until all other initializations are complete.
2699
2700 Even if interrupts are globally enabled, they must also be
2701 individually enabled for each channel that is to generate
2702 interrupts.
2703
2704Warnings: No range checking on any of the parameters is done.
2705
2706 No context switches are allowed while executing this function.
2707
2708 After this function all AIOPs on the controller are disabled,
2709 they can be enabled with sEnAiop().
2710*/
f15313bf
AB		 2711static int sPCIInitController(CONTROLLER_T * CtlP, int CtlNum,
2712 ByteIO_t * AiopIOList, int AiopIOListSize,
2713 WordIO_t ConfigIO, int IRQNum, Byte_t Frequency,
2714 int PeriodicOnly, int altChanRingIndicator,
2715 int UPCIRingInd)
1da177e4
LT		 2716{
2717 int i;
2718 ByteIO_t io;
2719
2720 CtlP->AltChanRingIndicator = altChanRingIndicator;
2721 CtlP->UPCIRingInd = UPCIRingInd;
2722 CtlP->CtlNum = CtlNum;
2723 CtlP->CtlID = CTLID_0001; /* controller release 1 */
2724 CtlP->BusType = isPCI; /* controller release 1 */
2725
2726 if (ConfigIO) {
2727 CtlP->isUPCI = 1;
2728 CtlP->PCIIO = ConfigIO + _PCI_9030_INT_CTRL;
2729 CtlP->PCIIO2 = ConfigIO + _PCI_9030_GPIO_CTRL;
2730 CtlP->AiopIntrBits = upci_aiop_intr_bits;
2731 } else {
2732 CtlP->isUPCI = 0;
2733 CtlP->PCIIO =
2734 (WordIO_t) ((ByteIO_t) AiopIOList[0] + _PCI_INT_FUNC);
2735 CtlP->AiopIntrBits = aiop_intr_bits;
2736 }
2737
2738 sPCIControllerEOI(CtlP); /* clear EOI if warm init */
2739 /* Init AIOPs */
2740 CtlP->NumAiop = 0;
2741 for (i = 0; i < AiopIOListSize; i++) {
2742 io = AiopIOList[i];
2743 CtlP->AiopIO[i] = (WordIO_t) io;
2744 CtlP->AiopIntChanIO[i] = io + _INT_CHAN;
2745
2746 CtlP->AiopID[i] = sReadAiopID(io); /* read AIOP ID */
2747 if (CtlP->AiopID[i] == AIOPID_NULL) /* if AIOP does not exist */
2748 break; /* done looking for AIOPs */
2749
2750 CtlP->AiopNumChan[i] = sReadAiopNumChan((WordIO_t) io); /* num channels in AIOP */
2751 sOutW((WordIO_t) io + _INDX_ADDR, _CLK_PRE); /* clock prescaler */
2752 sOutB(io + _INDX_DATA, sClockPrescale);
2753 CtlP->NumAiop++; /* bump count of AIOPs */
2754 }
2755
2756 if (CtlP->NumAiop == 0)
2757 return (-1);
2758 else
2759 return (CtlP->NumAiop);
2760}
2761
2762/***************************************************************************
2763Function: sReadAiopID
2764Purpose: Read the AIOP idenfication number directly from an AIOP.
2765Call: sReadAiopID(io)
2766 ByteIO_t io: AIOP base I/O address
2767Return: int: Flag AIOPID_XXXX if a valid AIOP is found, where X
2768 is replace by an identifying number.
2769 Flag AIOPID_NULL if no valid AIOP is found
2770Warnings: No context switches are allowed while executing this function.
2771
2772*/
f15313bf 2773static int sReadAiopID(ByteIO_t io)
1da177e4
LT		 2774{
2775 Byte_t AiopID; /* ID byte from AIOP */
2776
2777 sOutB(io + _CMD_REG, RESET_ALL); /* reset AIOP */
2778 sOutB(io + _CMD_REG, 0x0);
2779 AiopID = sInW(io + _CHN_STAT0) & 0x07;
2780 if (AiopID == 0x06)
2781 return (1);
2782 else /* AIOP does not exist */
2783 return (-1);
2784}
2785
2786/***************************************************************************
2787Function: sReadAiopNumChan
2788Purpose: Read the number of channels available in an AIOP directly from
2789 an AIOP.
2790Call: sReadAiopNumChan(io)
2791 WordIO_t io: AIOP base I/O address
2792Return: int: The number of channels available
2793Comments: The number of channels is determined by write/reads from identical
2794 offsets within the SRAM address spaces for channels 0 and 4.
2795 If the channel 4 space is mirrored to channel 0 it is a 4 channel
2796 AIOP, otherwise it is an 8 channel.
2797Warnings: No context switches are allowed while executing this function.
2798*/
f15313bf 2799static int sReadAiopNumChan(WordIO_t io)
1da177e4
LT		 2800{
2801 Word_t x;
2802 static Byte_t R[4] = { 0x00, 0x00, 0x34, 0x12 };
2803
2804 /* write to chan 0 SRAM */
2805 sOutDW((DWordIO_t) io + _INDX_ADDR, *((DWord_t *) & R[0]));
2806 sOutW(io + _INDX_ADDR, 0); /* read from SRAM, chan 0 */
2807 x = sInW(io + _INDX_DATA);
2808 sOutW(io + _INDX_ADDR, 0x4000); /* read from SRAM, chan 4 */
2809 if (x != sInW(io + _INDX_DATA)) /* if different must be 8 chan */
2810 return (8);
2811 else
2812 return (4);
2813}
2814
2815/***************************************************************************
2816Function: sInitChan
2817Purpose: Initialization of a channel and channel structure
2818Call: sInitChan(CtlP,ChP,AiopNum,ChanNum)
2819 CONTROLLER_T *CtlP; Ptr to controller structure
2820 CHANNEL_T *ChP; Ptr to channel structure
2821 int AiopNum; AIOP number within controller
2822 int ChanNum; Channel number within AIOP
f15313bf 2823Return: int: 1 if initialization succeeded, 0 if it fails because channel
1da177e4
LT		 2824 number exceeds number of channels available in AIOP.
2825Comments: This function must be called before a channel can be used.
2826Warnings: No range checking on any of the parameters is done.
2827
2828 No context switches are allowed while executing this function.
2829*/
f15313bf
AB		 2830static int sInitChan(CONTROLLER_T * CtlP, CHANNEL_T * ChP, int AiopNum,
2831 int ChanNum)
1da177e4
LT		 2832{
2833 int i;
2834 WordIO_t AiopIO;
2835 WordIO_t ChIOOff;
2836 Byte_t *ChR;
2837 Word_t ChOff;
2838 static Byte_t R[4];
2839 int brd9600;
2840
2841 if (ChanNum >= CtlP->AiopNumChan[AiopNum])
f15313bf 2842 return 0; /* exceeds num chans in AIOP */
1da177e4
LT		 2843
2844 /* Channel, AIOP, and controller identifiers */
2845 ChP->CtlP = CtlP;
2846 ChP->ChanID = CtlP->AiopID[AiopNum];
2847 ChP->AiopNum = AiopNum;
2848 ChP->ChanNum = ChanNum;
2849
2850 /* Global direct addresses */
2851 AiopIO = CtlP->AiopIO[AiopNum];
2852 ChP->Cmd = (ByteIO_t) AiopIO + _CMD_REG;
2853 ChP->IntChan = (ByteIO_t) AiopIO + _INT_CHAN;
2854 ChP->IntMask = (ByteIO_t) AiopIO + _INT_MASK;
2855 ChP->IndexAddr = (DWordIO_t) AiopIO + _INDX_ADDR;
2856 ChP->IndexData = AiopIO + _INDX_DATA;
2857
2858 /* Channel direct addresses */
2859 ChIOOff = AiopIO + ChP->ChanNum * 2;
2860 ChP->TxRxData = ChIOOff + _TD0;
2861 ChP->ChanStat = ChIOOff + _CHN_STAT0;
2862 ChP->TxRxCount = ChIOOff + _FIFO_CNT0;
2863 ChP->IntID = (ByteIO_t) AiopIO + ChP->ChanNum + _INT_ID0;
2864
2865 /* Initialize the channel from the RData array */
2866 for (i = 0; i < RDATASIZE; i += 4) {
2867 R[0] = RData[i];
2868 R[1] = RData[i + 1] + 0x10 * ChanNum;
2869 R[2] = RData[i + 2];
2870 R[3] = RData[i + 3];
2871 sOutDW(ChP->IndexAddr, *((DWord_t *) & R[0]));
2872 }
2873
2874 ChR = ChP->R;
2875 for (i = 0; i < RREGDATASIZE; i += 4) {
2876 ChR[i] = RRegData[i];
2877 ChR[i + 1] = RRegData[i + 1] + 0x10 * ChanNum;
2878 ChR[i + 2] = RRegData[i + 2];
2879 ChR[i + 3] = RRegData[i + 3];
2880 }
2881
2882 /* Indexed registers */
2883 ChOff = (Word_t) ChanNum *0x1000;
2884
2885 if (sClockPrescale == 0x14)
2886 brd9600 = 47;
2887 else
2888 brd9600 = 23;
2889
2890 ChP->BaudDiv[0] = (Byte_t) (ChOff + _BAUD);
2891 ChP->BaudDiv[1] = (Byte_t) ((ChOff + _BAUD) >> 8);
2892 ChP->BaudDiv[2] = (Byte_t) brd9600;
2893 ChP->BaudDiv[3] = (Byte_t) (brd9600 >> 8);
2894 sOutDW(ChP->IndexAddr, *(DWord_t *) & ChP->BaudDiv[0]);
2895
2896 ChP->TxControl[0] = (Byte_t) (ChOff + _TX_CTRL);
2897 ChP->TxControl[1] = (Byte_t) ((ChOff + _TX_CTRL) >> 8);
2898 ChP->TxControl[2] = 0;
2899 ChP->TxControl[3] = 0;
2900 sOutDW(ChP->IndexAddr, *(DWord_t *) & ChP->TxControl[0]);
2901
2902 ChP->RxControl[0] = (Byte_t) (ChOff + _RX_CTRL);
2903 ChP->RxControl[1] = (Byte_t) ((ChOff + _RX_CTRL) >> 8);
2904 ChP->RxControl[2] = 0;
2905 ChP->RxControl[3] = 0;
2906 sOutDW(ChP->IndexAddr, *(DWord_t *) & ChP->RxControl[0]);
2907
2908 ChP->TxEnables[0] = (Byte_t) (ChOff + _TX_ENBLS);
2909 ChP->TxEnables[1] = (Byte_t) ((ChOff + _TX_ENBLS) >> 8);
2910 ChP->TxEnables[2] = 0;
2911 ChP->TxEnables[3] = 0;
2912 sOutDW(ChP->IndexAddr, *(DWord_t *) & ChP->TxEnables[0]);
2913
2914 ChP->TxCompare[0] = (Byte_t) (ChOff + _TXCMP1);
2915 ChP->TxCompare[1] = (Byte_t) ((ChOff + _TXCMP1) >> 8);
2916 ChP->TxCompare[2] = 0;
2917 ChP->TxCompare[3] = 0;
2918 sOutDW(ChP->IndexAddr, *(DWord_t *) & ChP->TxCompare[0]);
2919
2920 ChP->TxReplace1[0] = (Byte_t) (ChOff + _TXREP1B1);
2921 ChP->TxReplace1[1] = (Byte_t) ((ChOff + _TXREP1B1) >> 8);
2922 ChP->TxReplace1[2] = 0;
2923 ChP->TxReplace1[3] = 0;
2924 sOutDW(ChP->IndexAddr, *(DWord_t *) & ChP->TxReplace1[0]);
2925
2926 ChP->TxReplace2[0] = (Byte_t) (ChOff + _TXREP2);
2927 ChP->TxReplace2[1] = (Byte_t) ((ChOff + _TXREP2) >> 8);
2928 ChP->TxReplace2[2] = 0;
2929 ChP->TxReplace2[3] = 0;
2930 sOutDW(ChP->IndexAddr, *(DWord_t *) & ChP->TxReplace2[0]);
2931
2932 ChP->TxFIFOPtrs = ChOff + _TXF_OUTP;
2933 ChP->TxFIFO = ChOff + _TX_FIFO;
2934
2935 sOutB(ChP->Cmd, (Byte_t) ChanNum | RESTXFCNT); /* apply reset Tx FIFO count */
2936 sOutB(ChP->Cmd, (Byte_t) ChanNum); /* remove reset Tx FIFO count */
2937 sOutW((WordIO_t) ChP->IndexAddr, ChP->TxFIFOPtrs); /* clear Tx in/out ptrs */
2938 sOutW(ChP->IndexData, 0);
2939 ChP->RxFIFOPtrs = ChOff + _RXF_OUTP;
2940 ChP->RxFIFO = ChOff + _RX_FIFO;
2941
2942 sOutB(ChP->Cmd, (Byte_t) ChanNum | RESRXFCNT); /* apply reset Rx FIFO count */
2943 sOutB(ChP->Cmd, (Byte_t) ChanNum); /* remove reset Rx FIFO count */
2944 sOutW((WordIO_t) ChP->IndexAddr, ChP->RxFIFOPtrs); /* clear Rx out ptr */
2945 sOutW(ChP->IndexData, 0);
2946 sOutW((WordIO_t) ChP->IndexAddr, ChP->RxFIFOPtrs + 2); /* clear Rx in ptr */
2947 sOutW(ChP->IndexData, 0);
2948 ChP->TxPrioCnt = ChOff + _TXP_CNT;
2949 sOutW((WordIO_t) ChP->IndexAddr, ChP->TxPrioCnt);
2950 sOutB(ChP->IndexData, 0);
2951 ChP->TxPrioPtr = ChOff + _TXP_PNTR;
2952 sOutW((WordIO_t) ChP->IndexAddr, ChP->TxPrioPtr);
2953 sOutB(ChP->IndexData, 0);
2954 ChP->TxPrioBuf = ChOff + _TXP_BUF;
2955 sEnRxProcessor(ChP); /* start the Rx processor */
2956
f15313bf 2957 return 1;
1da177e4
LT		 2958}
2959
2960/***************************************************************************
2961Function: sStopRxProcessor
2962Purpose: Stop the receive processor from processing a channel.
2963Call: sStopRxProcessor(ChP)
2964 CHANNEL_T *ChP; Ptr to channel structure
2965
2966Comments: The receive processor can be started again with sStartRxProcessor().
2967 This function causes the receive processor to skip over the
2968 stopped channel. It does not stop it from processing other channels.
2969
2970Warnings: No context switches are allowed while executing this function.
2971
2972 Do not leave the receive processor stopped for more than one
2973 character time.
2974
2975 After calling this function a delay of 4 uS is required to ensure
2976 that the receive processor is no longer processing this channel.
2977*/
f15313bf 2978static void sStopRxProcessor(CHANNEL_T * ChP)
1da177e4
LT		 2979{
2980 Byte_t R[4];
2981
2982 R[0] = ChP->R[0];
2983 R[1] = ChP->R[1];
2984 R[2] = 0x0a;
2985 R[3] = ChP->R[3];
2986 sOutDW(ChP->IndexAddr, *(DWord_t *) & R[0]);
2987}
2988
2989/***************************************************************************
2990Function: sFlushRxFIFO
2991Purpose: Flush the Rx FIFO
2992Call: sFlushRxFIFO(ChP)
2993 CHANNEL_T *ChP; Ptr to channel structure
2994Return: void
2995Comments: To prevent data from being enqueued or dequeued in the Tx FIFO
2996 while it is being flushed the receive processor is stopped
2997 and the transmitter is disabled. After these operations a
2998 4 uS delay is done before clearing the pointers to allow
2999 the receive processor to stop. These items are handled inside
3000 this function.
3001Warnings: No context switches are allowed while executing this function.
3002*/
f15313bf 3003static void sFlushRxFIFO(CHANNEL_T * ChP)
1da177e4
LT		 3004{
3005 int i;
3006 Byte_t Ch; /* channel number within AIOP */
f15313bf 3007 int RxFIFOEnabled; /* 1 if Rx FIFO enabled */
1da177e4
LT		 3008
3009 if (sGetRxCnt(ChP) == 0) /* Rx FIFO empty */
3010 return; /* don't need to flush */
3011
f15313bf 3012 RxFIFOEnabled = 0;
1da177e4 3013 if (ChP->R[0x32] == 0x08) { /* Rx FIFO is enabled */
f15313bf 3014 RxFIFOEnabled = 1;
1da177e4
LT		 3015 sDisRxFIFO(ChP); /* disable it */
3016 for (i = 0; i < 2000 / 200; i++) /* delay 2 uS to allow proc to disable FIFO */
3017 sInB(ChP->IntChan); /* depends on bus i/o timing */
3018 }
3019 sGetChanStatus(ChP); /* clear any pending Rx errors in chan stat */
3020 Ch = (Byte_t) sGetChanNum(ChP);
3021 sOutB(ChP->Cmd, Ch | RESRXFCNT); /* apply reset Rx FIFO count */
3022 sOutB(ChP->Cmd, Ch); /* remove reset Rx FIFO count */
3023 sOutW((WordIO_t) ChP->IndexAddr, ChP->RxFIFOPtrs); /* clear Rx out ptr */
3024 sOutW(ChP->IndexData, 0);
3025 sOutW((WordIO_t) ChP->IndexAddr, ChP->RxFIFOPtrs + 2); /* clear Rx in ptr */
3026 sOutW(ChP->IndexData, 0);
3027 if (RxFIFOEnabled)
3028 sEnRxFIFO(ChP); /* enable Rx FIFO */
3029}
3030
3031/***************************************************************************
3032Function: sFlushTxFIFO
3033Purpose: Flush the Tx FIFO
3034Call: sFlushTxFIFO(ChP)
3035 CHANNEL_T *ChP; Ptr to channel structure
3036Return: void
3037Comments: To prevent data from being enqueued or dequeued in the Tx FIFO
3038 while it is being flushed the receive processor is stopped
3039 and the transmitter is disabled. After these operations a
3040 4 uS delay is done before clearing the pointers to allow
3041 the receive processor to stop. These items are handled inside
3042 this function.
3043Warnings: No context switches are allowed while executing this function.
3044*/
f15313bf 3045static void sFlushTxFIFO(CHANNEL_T * ChP)
1da177e4
LT		 3046{
3047 int i;
3048 Byte_t Ch; /* channel number within AIOP */
f15313bf 3049 int TxEnabled; /* 1 if transmitter enabled */
1da177e4
LT		 3050
3051 if (sGetTxCnt(ChP) == 0) /* Tx FIFO empty */
3052 return; /* don't need to flush */
3053
f15313bf 3054 TxEnabled = 0;
1da177e4 3055 if (ChP->TxControl[3] & TX_ENABLE) {
f15313bf 3056 TxEnabled = 1;
1da177e4
LT		 3057 sDisTransmit(ChP); /* disable transmitter */
3058 }
3059 sStopRxProcessor(ChP); /* stop Rx processor */
3060 for (i = 0; i < 4000 / 200; i++) /* delay 4 uS to allow proc to stop */
3061 sInB(ChP->IntChan); /* depends on bus i/o timing */
3062 Ch = (Byte_t) sGetChanNum(ChP);
3063 sOutB(ChP->Cmd, Ch | RESTXFCNT); /* apply reset Tx FIFO count */
3064 sOutB(ChP->Cmd, Ch); /* remove reset Tx FIFO count */
3065 sOutW((WordIO_t) ChP->IndexAddr, ChP->TxFIFOPtrs); /* clear Tx in/out ptrs */
3066 sOutW(ChP->IndexData, 0);
3067 if (TxEnabled)
3068 sEnTransmit(ChP); /* enable transmitter */
3069 sStartRxProcessor(ChP); /* restart Rx processor */
3070}
3071
3072/***************************************************************************
3073Function: sWriteTxPrioByte
3074Purpose: Write a byte of priority transmit data to a channel
3075Call: sWriteTxPrioByte(ChP,Data)
3076 CHANNEL_T *ChP; Ptr to channel structure
3077 Byte_t Data; The transmit data byte
3078
3079Return: int: 1 if the bytes is successfully written, otherwise 0.
3080
3081Comments: The priority byte is transmitted before any data in the Tx FIFO.
3082
3083Warnings: No context switches are allowed while executing this function.
3084*/
f15313bf 3085static int sWriteTxPrioByte(CHANNEL_T * ChP, Byte_t Data)
1da177e4
LT		 3086{
3087 Byte_t DWBuf[4]; /* buffer for double word writes */
3088 Word_t *WordPtr; /* must be far because Win SS != DS */
3089 register DWordIO_t IndexAddr;
3090
3091 if (sGetTxCnt(ChP) > 1) { /* write it to Tx priority buffer */
3092 IndexAddr = ChP->IndexAddr;
3093 sOutW((WordIO_t) IndexAddr, ChP->TxPrioCnt); /* get priority buffer status */
3094 if (sInB((ByteIO_t) ChP->IndexData) & PRI_PEND) /* priority buffer busy */
3095 return (0); /* nothing sent */
3096
3097 WordPtr = (Word_t *) (&DWBuf[0]);
3098 *WordPtr = ChP->TxPrioBuf; /* data byte address */
3099
3100 DWBuf[2] = Data; /* data byte value */
3101 sOutDW(IndexAddr, *((DWord_t *) (&DWBuf[0]))); /* write it out */
3102
3103 *WordPtr = ChP->TxPrioCnt; /* Tx priority count address */
3104
3105 DWBuf[2] = PRI_PEND + 1; /* indicate 1 byte pending */
3106 DWBuf[3] = 0; /* priority buffer pointer */
3107 sOutDW(IndexAddr, *((DWord_t *) (&DWBuf[0]))); /* write it out */
3108 } else { /* write it to Tx FIFO */
3109
3110 sWriteTxByte(sGetTxRxDataIO(ChP), Data);
3111 }
3112 return (1); /* 1 byte sent */
3113}
3114
3115/***************************************************************************
3116Function: sEnInterrupts
3117Purpose: Enable one or more interrupts for a channel
3118Call: sEnInterrupts(ChP,Flags)
3119 CHANNEL_T *ChP; Ptr to channel structure
3120 Word_t Flags: Interrupt enable flags, can be any combination
3121 of the following flags:
3122 TXINT_EN: Interrupt on Tx FIFO empty
3123 RXINT_EN: Interrupt on Rx FIFO at trigger level (see
3124 sSetRxTrigger())
3125 SRCINT_EN: Interrupt on SRC (Special Rx Condition)
3126 MCINT_EN: Interrupt on modem input change
3127 CHANINT_EN: Allow channel interrupt signal to the AIOP's
3128 Interrupt Channel Register.
3129Return: void
3130Comments: If an interrupt enable flag is set in Flags, that interrupt will be
3131 enabled. If an interrupt enable flag is not set in Flags, that
3132 interrupt will not be changed. Interrupts can be disabled with
3133 function sDisInterrupts().
3134
3135 This function sets the appropriate bit for the channel in the AIOP's
3136 Interrupt Mask Register if the CHANINT_EN flag is set. This allows
3137 this channel's bit to be set in the AIOP's Interrupt Channel Register.
3138
3139 Interrupts must also be globally enabled before channel interrupts
3140 will be passed on to the host. This is done with function
3141 sEnGlobalInt().
3142
3143 In some cases it may be desirable to disable interrupts globally but
3144 enable channel interrupts. This would allow the global interrupt
3145 status register to be used to determine which AIOPs need service.
3146*/
f15313bf 3147static void sEnInterrupts(CHANNEL_T * ChP, Word_t Flags)
1da177e4
LT		 3148{
3149 Byte_t Mask; /* Interrupt Mask Register */
3150
3151 ChP->RxControl[2] |=
3152 ((Byte_t) Flags & (RXINT_EN | SRCINT_EN | MCINT_EN));
3153
3154 sOutDW(ChP->IndexAddr, *(DWord_t *) & ChP->RxControl[0]);
3155
3156 ChP->TxControl[2] |= ((Byte_t) Flags & TXINT_EN);
3157
3158 sOutDW(ChP->IndexAddr, *(DWord_t *) & ChP->TxControl[0]);
3159
3160 if (Flags & CHANINT_EN) {
3161 Mask = sInB(ChP->IntMask) | sBitMapSetTbl[ChP->ChanNum];
3162 sOutB(ChP->IntMask, Mask);
3163 }
3164}
3165
3166/***************************************************************************
3167Function: sDisInterrupts
3168Purpose: Disable one or more interrupts for a channel
3169Call: sDisInterrupts(ChP,Flags)
3170 CHANNEL_T *ChP; Ptr to channel structure
3171 Word_t Flags: Interrupt flags, can be any combination
3172 of the following flags:
3173 TXINT_EN: Interrupt on Tx FIFO empty
3174 RXINT_EN: Interrupt on Rx FIFO at trigger level (see
3175 sSetRxTrigger())
3176 SRCINT_EN: Interrupt on SRC (Special Rx Condition)
3177 MCINT_EN: Interrupt on modem input change
3178 CHANINT_EN: Disable channel interrupt signal to the
3179 AIOP's Interrupt Channel Register.
3180Return: void
3181Comments: If an interrupt flag is set in Flags, that interrupt will be
3182 disabled. If an interrupt flag is not set in Flags, that
3183 interrupt will not be changed. Interrupts can be enabled with
3184 function sEnInterrupts().
3185
3186 This function clears the appropriate bit for the channel in the AIOP's
3187 Interrupt Mask Register if the CHANINT_EN flag is set. This blocks
3188 this channel's bit from being set in the AIOP's Interrupt Channel
3189 Register.
3190*/
f15313bf 3191static void sDisInterrupts(CHANNEL_T * ChP, Word_t Flags)
1da177e4
LT		 3192{
3193 Byte_t Mask; /* Interrupt Mask Register */
3194
3195 ChP->RxControl[2] &=
3196 ~((Byte_t) Flags & (RXINT_EN | SRCINT_EN | MCINT_EN));
3197 sOutDW(ChP->IndexAddr, *(DWord_t *) & ChP->RxControl[0]);
3198 ChP->TxControl[2] &= ~((Byte_t) Flags & TXINT_EN);
3199 sOutDW(ChP->IndexAddr, *(DWord_t *) & ChP->TxControl[0]);
3200
3201 if (Flags & CHANINT_EN) {
3202 Mask = sInB(ChP->IntMask) & sBitMapClrTbl[ChP->ChanNum];
3203 sOutB(ChP->IntMask, Mask);
3204 }
3205}
3206
f15313bf 3207static void sSetInterfaceMode(CHANNEL_T * ChP, Byte_t mode)
1da177e4
LT		 3208{
3209 sOutB(ChP->CtlP->AiopIO[2], (mode & 0x18) | ChP->ChanNum);
3210}
3211
3212/*
3213 * Not an official SSCI function, but how to reset RocketModems.
3214 * ISA bus version
3215 */
f15313bf 3216static void sModemReset(CONTROLLER_T * CtlP, int chan, int on)
1da177e4
LT		 3217{
3218 ByteIO_t addr;
3219 Byte_t val;
3220
3221 addr = CtlP->AiopIO[0] + 0x400;
3222 val = sInB(CtlP->MReg3IO);
3223 /* if AIOP[1] is not enabled, enable it */
3224 if ((val & 2) == 0) {
3225 val = sInB(CtlP->MReg2IO);
3226 sOutB(CtlP->MReg2IO, (val & 0xfc) | (1 & 0x03));
3227 sOutB(CtlP->MBaseIO, (unsigned char) (addr >> 6));
3228 }
3229
3230 sEnAiop(CtlP, 1);
3231 if (!on)
3232 addr += 8;
3233 sOutB(addr + chan, 0); /* apply or remove reset */
3234 sDisAiop(CtlP, 1);
3235}
3236
3237/*
3238 * Not an official SSCI function, but how to reset RocketModems.
3239 * PCI bus version
3240 */
f15313bf 3241static void sPCIModemReset(CONTROLLER_T * CtlP, int chan, int on)
1da177e4
LT		 3242{
3243 ByteIO_t addr;
3244
3245 addr = CtlP->AiopIO[0] + 0x40; /* 2nd AIOP */
3246 if (!on)
3247 addr += 8;
3248 sOutB(addr + chan, 0); /* apply or remove reset */
3249}
3250
3251/* Resets the speaker controller on RocketModem II and III devices */
3252static void rmSpeakerReset(CONTROLLER_T * CtlP, unsigned long model)
3253{
3254 ByteIO_t addr;
3255
3256 /* RocketModem II speaker control is at the 8th port location of offset 0x40 */
3257 if ((model == MODEL_RP4M) || (model == MODEL_RP6M)) {
3258 addr = CtlP->AiopIO[0] + 0x4F;
3259 sOutB(addr, 0);
3260 }
3261
3262 /* RocketModem III speaker control is at the 1st port location of offset 0x80 */
3263 if ((model == MODEL_UPCI_RM3_8PORT)
3264 || (model == MODEL_UPCI_RM3_4PORT)) {
3265 addr = CtlP->AiopIO[0] + 0x88;
3266 sOutB(addr, 0);
3267 }
3268}
3269
3270/* Returns the line number given the controller (board), aiop and channel number */
3271static unsigned char GetLineNumber(int ctrl, int aiop, int ch)
3272{
3273 return lineNumbers[(ctrl << 5) | (aiop << 3) | ch];
3274}
3275
3276/*
3277 * Stores the line number associated with a given controller (board), aiop
3278 * and channel number.
3279 * Returns: The line number assigned
3280 */
3281static unsigned char SetLineNumber(int ctrl, int aiop, int ch)
3282{
3283 lineNumbers[(ctrl << 5) | (aiop << 3) | ch] = nextLineNumber++;
3284 return (nextLineNumber - 1);
3285}
Empty description
This page took 0.713998 seconds and 4 git commands to generate.