configs/mx25pdk: remove defconfig

The imx25pdk board has been removed from U-Boot and I no
longer have access to the board.

Remove its support.

Signed-off-by: Fabio Estevam <[email protected]>
Signed-off-by: Thomas Petazzoni <[email protected]>

diff --git a/.checkpackageignore b/.checkpackageignore
index 81e48bf85909d9a1300d201db7179556896e6acb..4cfc202153c706bceba65bceb77b8f53004d843e 100644 (file)
--- a/.checkpackageignore
+++ b/.checkpackageignore
@@ -191,7 +191,6 @@ configs/microchip_sama5d2_icp_mmc_dev_defconfig lib_defconfig.ForceCheckHash
 configs/microchip_sama7g5ek_mmc_defconfig lib_defconfig.ForceCheckHash
 configs/microchip_sama7g5ek_mmc_dev_defconfig lib_defconfig.ForceCheckHash
 configs/minnowboard_max_defconfig lib_defconfig.ForceCheckHash
-configs/mx25pdk_defconfig lib_defconfig.ForceCheckHash
 configs/mx53loco_defconfig lib_defconfig.ForceCheckHash
 configs/mx6udoo_defconfig lib_defconfig.ForceCheckHash
 configs/nexbox_a95x_defconfig lib_defconfig.ForceCheckHash

diff --git a/DEVELOPERS b/DEVELOPERS
index 426590d5c5fe1d1d8b4ba70829e0cb8508b0fe7c..0b590f0ec20c0c6ecc74b7209edff9c53a356f83 100644 (file)
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -980,7 +980,6 @@ F:  configs/imx6ulpico_defconfig
 F:     configs/imx7d-sdb_defconfig
 F:     configs/imx7dpico_defconfig
 F:     configs/imx8mqevk_defconfig
-F:     configs/mx25pdk_defconfig
 F:     configs/mx51evk_defconfig
 F:     configs/mx53loco_defconfig
 F:     configs/mx6cubox_defconfig

diff --git a/board/freescale/imx25pdk/readme.txt b/board/freescale/imx25pdk/readme.txt
deleted file mode 100644 (file)
index 1aece6c..0000000
--- a/board/freescale/imx25pdk/readme.txt
+++ /dev/null
@@ -1,54 +0,0 @@
-**************************
-Freescale i.MX25 PDK board
-**************************
-
-This file documents the Buildroot support for the Freescale i.MX25 PDK board.
-
-Build
-=====
-
-First, configure Buildroot for the i.MX25 PDK board:
-
-  make mx25pdk_defconfig
-
-Build all components:
-
-  make
-
-You will find in output/images/ the following files:
-  - imx25-pdk.dtb
-  - rootfs.ext4
-  - rootfs.tar
-  - sdcard.img
-  - u-boot.imx
-  - zImage
-
-Create a bootable SD card
-=========================
-
-To determine the device associated to the SD card have a look in the
-/proc/partitions file:
-
-  cat /proc/partitions
-
-Buildroot prepares a bootable "sdcard.img" image in the output/images/
-directory, ready to be dumped on a SD card. Launch the following
-command as root:
-
-  dd if=output/images/sdcard.img of=/dev/<your-sd-device>
-
-*** WARNING! This will destroy all the card content. Use with care! ***
-
-For details about the medium image layout, see the definition in
-board/freescale/common/imx/genimage.cfg.template.
-
-Boot the i.MX25 PDK board
-=========================
-
-To boot your newly created system:
-- insert the SD card in the SD slot of the board;
-- put a USB cable into the Debug USB Port and connect using a terminal
-  emulator at 115200 bps, 8n1;
-- power on the board.
-
-Enjoy!

diff --git a/configs/mx25pdk_defconfig b/configs/mx25pdk_defconfig
deleted file mode 100644 (file)
index ec4f8b8..0000000
--- a/configs/mx25pdk_defconfig
+++ /dev/null
@@ -1,35 +0,0 @@
-# Architecture
-BR2_arm=y
-BR2_arm926t=y
-
-# Linux headers same as kernel, a 4.15 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_15=y
-
-# System
-BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
-
-# required tools to create the SD card image
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
-
-# Filesystem
-BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh"
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-
-# Bootloader
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BOARDNAME="mx25pdk"
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2018.01"
-BR2_TARGET_UBOOT_FORMAT_IMX=y
-
-# Kernel
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.15.7"
-BR2_LINUX_KERNEL_DEFCONFIG="imx_v4_v5"
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx25-pdk"
-BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y