configs/zynqmp_zcu106_defconfig: move to board rev1.0

Migrate the zynqmp_zcu106_defconfig to rev1.0 ddr memory, since all new boards
will be using the rev1.0 ddr memory.

This patch also adds documentation in the board/zynqmp/readme.txt explaining
the issue related to the change in ddr memory.  Should users not see anything
printing from the board during boot, the most likely issue is that the board
has the original ddr memory and the u-boot device tree needs to be configured
accordingly to revA.

Original DDR Memory:
BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="DEVICE_TREE=zynqmp-zcu106-revA"

More information regarding this issue can be found here:
https://support.xilinx.com/s/article/71961?language=en_US

Signed-off-by: Neal Frager <[email protected]>
Reviewed-by: Brandon Maier <[email protected]>
Signed-off-by: Thomas Petazzoni <[email protected]>

diff --git a/board/zynqmp/readme.txt b/board/zynqmp/readme.txt
index 3a8a9b03ac2e2cd2d097af29fb18d913d21197e1..3f1b3a80c2b9a1bfda5b1b3375c5bc414c6d0df0 100644 (file)
--- a/board/zynqmp/readme.txt
+++ b/board/zynqmp/readme.txt
@@ -64,3 +64,29 @@ card:
 Where 'sdX' is the device node of the SD.
 
 Eject the SD card, insert it in the board, and power it up.
+
+==============
+Important Note
+==============
+
+The DDR memory on the original ZCU102 and ZCU106 boards is EOL.
+The Buildroot defconfigs for these boards use the new DDR memory
+which is configured by the u-boot spl initialization with the
+Buildroot config options below.
+
+New DDR Memories:
+BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="DEVICE_TREE=zynqmp-zcu102-rev1.0"
+BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="DEVICE_TREE=zynqmp-zcu106-rev1.0"
+
+If nothing is printing upon boot, most likely it is because the
+board has the original DDR memories.  To fix the problem, modify
+the Buildroot defconfig file to use the u-boot spl initialization
+for the original DDR memory using the config below for the target
+board.
+
+Original DDR Memories:
+BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="DEVICE_TREE=zynqmp-zcu102-revA"
+BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="DEVICE_TREE=zynqmp-zcu106-revA"
+
+For more information on this issue:
+https://support.xilinx.com/s/article/71961?language=en_US

diff --git a/configs/zynqmp_zcu106_defconfig b/configs/zynqmp_zcu106_defconfig
index c10ec70ed8d440bd49dc3bc06088b183a874753a..970ed40d2c99f9352cd87b4fd3df9816f19093d1 100644 (file)
--- a/configs/zynqmp_zcu106_defconfig
+++ b/configs/zynqmp_zcu106_defconfig
@@ -23,7 +23,7 @@ BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
 BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,u-boot-xlnx,xlnx_rebase_v2024.01_2024.1)/xlnx_rebase_v2024.01_2024.1.tar.gz"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="xilinx_zynqmp_virt"
-BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="DEVICE_TREE=zynqmp-zcu106-revA"
+BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="DEVICE_TREE=zynqmp-zcu106-rev1.0"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
 BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
 BR2_TARGET_UBOOT_NEEDS_GNUTLS=y