3 * configure.in (noconfigdirs): Don't skip gas on IRIX 6.
8 * configure.in: Substitute TOPLEVEL_CONFIGURE_ARGUMENTS.
9 * Makefile.tpl: Pass TOPLEVEL_CONFIGURE_ARGUMENTS to gcc.
10 * Makefile.in: Regenerate.
11 * configure: Regenerate.
15 * Makefile.tpl (BASE_FLAGS_TO_PASS): Also pass DESTDIR.
16 (install-info, dir.info): Prepend $(DESTDIR) to $(infodir).
17 * Makefile.in: Regenerate.
21 * configure.in: Remove Makefile in build, host and target modules
22 unless configure was run with --no-recursion.
27 * config.guess: Update to 2003-01-03 version.
28 * config.sub: Update to 2003-01-03 version.
32 * configure: Regenerate with proper autoconf 2.13.
36 * configure.in: Add AC_PREREQ for consistency.
37 * configure: Regenerate.
41 * configure.in (GDB_TK): Add tcl directories conditional on
42 gdb/gdbtk directory being present.
43 * configure: Regenerate.
47 * configure.in (LD): Improve test for gcc. Try to set LD to the ld used
48 by gcc if LD is not defined and we are not doing a Canadian Cross.
53 * src-release (ETC_SUPPORT): Add fdl.texi and texi2pod.pl.
57 * Makefile.in: Rebuilt.
58 * Makefile.def (target_modules) [libffi]: Allow installation.
62 * configure.in: Fix use of $program_transform_name.
63 * configure: Regenerated.
67 * configure.in (baseargs): Don't remove first configure argument.
68 * configure: Regenerated.
72 * Makefile.tpl (local-distclean): Don't remove...
73 (multilib.ts): ... this. Moved into...
74 (multilib.out): ... this. Don't use sub-make.
75 ($(BUILD_SUBDIR)/[+module+]/Makefile, [+module+]/Makefile,
76 $(TARGET_SUBDIR)/[+module+]/Makefile, gcc/Makefile): Moved into...
77 (configure-build-[+module+], configure-[+module+],
78 configure-target-[+module+], configure-gcc): ... these. Test
79 for Makefile existence. Drop config.status from dependencies.
80 * Makefile.in: Rebuilt.
81 * configure.in: Move gcc-version-trigger to the end of
82 ac_configure_args. Add comments to maybedep.tmp and
83 serdep.tmp. Introduce --disable-serial-configure. Remove
84 nonopt from baseargs, matching and removing corresponding
85 whitespace while at it.
90 * configure.in (host_configargs): Replace reference to
91 no-longer-defined buildopts with --build=${build_alias}.
96 * Makefile.tpl ($(NOTPARALLEL)): Move to the end. Bring uses of
97 program_transform_name to standard idiom.
98 (AUTOGEN, AUTOCONF): Define.
99 (Makefile.in): Use $(AUTOGEN).
100 (Makefile): Depend on config.status, and use autoconf-style rule to
101 build it. Move original commands to...
102 (config.status): ... this new target.
103 (configure): Add $(srcdir). Depend on config/acx.m4. Use
105 * Makefile.in: Rebuilt.
109 * Makefile.tpl: Fix dramatic bustage due to change in
110 program_transform_name.
111 * Makefile.in: Regenerate.
113 * configure.in: Remove unnecessary PATH setting.
114 * configure: Regnerate.
116 * configure.in: Don't default to unprefixed tools unless
117 the native tools will work.
118 * configure: Regenerate.
120 * configure.in: Convert to autoconf script. Blow away lots
121 of now-redundant Makefile fragments.
122 * configure: Generate using Autoconf.
123 * Makefile.tpl: Rewrite to reflect autoconfiscation.
124 * Makefile.in: Regenerate.
128 * configure: Remove unneeded 'export's. Make CC_FOR_TARGET,
129 CXX_FOR_TARGET, GCJ_FOR_TARGET substituted in configure.in only.
131 * ChangeLog: Move a couple of entries from here to winsup/cygwin,
136 * Makefile.tpl (multilib.out): Fix missing space.
137 * Makefile.in: Regenerate.
141 * Makefile.tpl: Use shared multilib.out. Use move-if-change for it.
142 Convert (cd foo; make) to (cd foo && make). Clean up multilib.out.
143 * Makefile.in: Regenerate.
144 * configure.in: Remove unnecessary leftovers.
148 * config/mt-aix43: Delete.
152 * configure.in (extra_ranlibflags_for_target): New variable.
153 (*-*-darwin): Add -c to ranlib commands.
154 * configure (tooldir): Handle extra_ranlibflags_for_target.
158 * COPYING.NEWLIB: Updated.
159 * COPYING.LIBGLOSS: Ditto.
163 * Makefile.tpl: Revert HJL's change.
164 * Makefile.in: Regenerated.
165 * configure.in: Put build_prefix before $(BUILD_SUBDIR) here, and
170 * Makefile.tpl, configure.in: Substitute libstdcxx_incdir.
171 * Makefile.in: Regenerate.
175 * Makefile.tpl: Add @build_prefix@ before $(BUILD_SUBDIR).
176 * Makefile.in: Regenerated.
178 * configure.in (build_prefix): New. Substitute.
182 * Makefile.tpl: Don't let real targets depend on phony targets.
183 * Makefile.in: Regenerate.
185 * Makefile.tpl (do-info): Depend on maybe-all-texinfo, not all-texinfo.
186 * Makefile.in: Regenerate.
190 * Makefile.tpl (all-gcc): Use 'make quickstrap' if there was a
191 previous 'make bootstrap'.
192 * Makefile.in: Regenerate.
196 * configure.in (noconfigdirs) [mmix-*-*]: Disable libgloss and gdb.
200 * Makefile.tpl (check-gcc-c++): Renamed from check-c++. Don't run
202 (check-c++): Just depend on it and check-target-libstdc++-v3.
203 * Makefile.in: Regenerate.
207 * configure.in, Makefile.tpl, Makefile.def: Remove tclX.
208 * Makefile.in: Regenerate.
212 * COPYING.NEWLIB: Update list of alternate Regent of California
213 licenses and discuss official revoking of advertising clause.
214 * COPYING.LIBGLOSS: Ditto.
218 * Makefile.tpl (configure-target-rda): Depend on $(ALL_GCC_C).
219 * Makefile.in: Rebuilt.
223 * configure: Fix bug put in by gremlins.
225 * Makefile.tpl: Substitute more autoconfily.
226 * configure: Substitute more autoconfily.
227 * Makefile.in: Regenerate.
231 * Makefile.tpl (all-sim): Depend on maybe-configure-gdb.
232 * Makefile.in (all-sim): Ditto.
236 * Makefile.tpl: Change configure dependencies to not have real
237 targets depend on phony targets.
241 * configure.in: Revert unintentional change.
243 * src-release: Configure host subdirs.
245 * Makefile.tpl: Change dependency for */multilib.out so that
246 it works when gcc isn't in the tree.
248 * configure.in: Substitute more.
249 * configure: Run subconfigures from the Makefile.
250 * Makefile.tpl: Run subconfigures from the Makefile; add a few
251 convenience targets. Make sure gcc isn't rebuilt after bootstrap.
255 * Makefile.tpl: Add targets for configuring host subdirs in Makefile,
256 and corresponding dependencies.
257 * Makefile.in: Regenerate.
259 * configure.in (host_tools): Order binutils, gas and ld for
260 convenience in running the testsuites.
262 * Makefile.tpl: Introduce rules to serialize subconfigure runs.
263 * Makefile.in: Regenerate.
264 * configure.in: Introduce rules to serialize subconfigure runs.
266 * configure.in: Introduce BASE_CC_FOR_TARGET.
267 * Makefile.tpl: Reorganize and comment. Introduce HOST_CONFIGARGS.
268 Realize configure-build-* targets. Realize configure-target-* targets.
269 * Makefile.in: Regenerate.
273 * configure: Move gcc_version_trigger stuff from here...
274 * configure.in: ...to here.
276 * configure.in: Separate subconfigure options added by this file from
277 options given by the user. Add machinery to put args for host
278 subconfigures into the Makefile.
280 * Makefile.tpl: Remove 'vault' targets.
281 * Makefile.tpl: Reorder and comment dependencies.
282 * Makefile.in: Regenerate.
286 * configure.in: Move host-specific darwin noconfigdirs into
287 the host-specific section.
291 * Makefile.tpl: Restore bkorb's style patch, accidentally lost
293 * Makefile.in: Regenerate.
295 (finishing slow-motion replay)
296 * configure: Remove skip-this-dir support.
297 * Makefile.tpl: Remove skip-this-dir support.
299 * Makefile.tpl: Remove leftover support for non-autoconfiscated
301 * Makefile.in: Regenerate.
303 * Makefile.tpl: Strip out useless setting of 'dir'.
304 * Makefile.in: Regenerate.
308 (finishing slow-motion replay)
309 * configure.in: Fix deeply stupid bug.
311 * configure.in: Introduce RAW_CXX_FOR_TARGET and simplify embedded
312 shell code in CXX_FOR_TARGET
313 * Makefile.def: Introduce raw_cxx.
314 * Makefile.tpl: Use raw_cxx to select between CXX_FOR_TARGET and
316 * Makefile.in: Regenerate.
320 (finishing slow-motion replay)
321 * Makefile.tpl: Remove unnecessary ifs.
322 * Makefile.in: Regenerate.
324 * Makefile.tpl: Implement soft dependency machinery. Maybe-ize
325 dependencies. Maybe-ize build-libiberty. Create dummy install
326 targets for 'no_install' modules.
327 * configure: Move GDB_TK substitution to configure.in. Move
328 build_modules stuff to configure.in.
329 * configure.in: Implement soft dependency machinery. Maybe-ize
330 GDB_TK, rearrange slightly. Move build_modules stuff from configure.
331 * Makefile.in: Regenerate.
335 (continuing slow-motion replay)
336 * Makefile.tpl: Make all-target, install-target behave similarly
337 to all, install (only hitting configured targets). Eliminate
338 unused macro defintions.
340 * Makefile.tpl: Add all-gcc: all-build-libiberty dependency when
343 * Makefile.tpl: Add all-gcc: all-libiberty dependency.
345 * ltcf-c.sh, ltcf-gcj.sh, Makefile.tpl: Correct BUILD/HOST confusion.
347 * configure.in: Produce lists of subdir targets we're actually
348 configuring. Remove references to "dosrel".
349 * Makefile.tpl: Let configure set which subdir targets are hit.
350 Remove install-cross; clean up install; remove ALL. Remove
351 references to "dosrel". Remove "EXTRA_TARGET_HOST" hackery.
352 Autogenerate host module targets. Remove empty dependency lines
353 and redundant dependency; rearrange slightly.
354 * Makefile.def: Add host-side libtermcap, utils.
356 * Makefile.in: Regenerate.
360 (Continuing slow-motion replay)
361 * Makefile.def: Add list of recursive targets to autogenerate.
363 * Makefile.tpl: Autogenerate do-* targets. Autogenerate *-target-*
364 targets. Autogenerate *-build-* targets.
365 * Makefile.in: Regenerate.
369 (Continuing slow-motion replay)
370 * configure: More autoconf-style substitutions.
371 * Makefile.tpl: More autoconf-style substitutions.
372 * Makefile.in: Regenerate.
376 (Continuing slow-motion replay)
377 * configure: Substitute more variables in a more autoconf-friendly
378 way. Simplify slightly.
379 * Makefile.tpl: Make more variables substitutable in an
380 autoconf-friendly way.
381 * Makefile.in: Regenerate.
385 (Continuing slow-motion replay)
386 * configure.in (v810*): Remove special setting of tools.
388 * configure: Add support for extra required flags for ar or nm.
389 * configure.in (aix4.3+): Use above support for target-specific
390 issues, rather than using config/mt-aix43.
394 (Starting slow-motion replay merge from gcc 3.4 b-i-b branch)
395 * configure: Remove 'removing', which doesn't work. Replace $subdir
396 with . everywhere. Replace $subdirs with ''. Replace $makesrcdir
397 with $srcdir. Reformat indentation. Substitute some variables
398 formerly hard-coded in the Makefile for build=host.
399 * Makefile.tpl: Autogenerate more; make more autoconf-friendly.
400 * Makefile.def: Autogenerate more.
401 * Makefile.in: Regenerate.
405 * Makefile.tpl: syntactic cleanup
409 * Makefile.def (host_modules): Add rda.
410 * Makefile.in: Regenerate.
411 * configure.in (target_tool): Add target-rda to list.
415 * Makefile.tpl (bootstrap): Add bubblestrap, quickstrap, cleanstrap,
416 and restrap targets to this rule.
417 * Makefile.in: Regenerate.
421 * configure.in (i[3456]86-*-linux*): Add check to disable
422 ${libgcj} for glibc1.
426 * configure.in: Add tic4x target.
430 * Makefile.tpl: Make SET_LIB_PATH substitution more autoconfy.
431 * Makefile.tpl: Make RPATH_ENVVAR substitution more autoconfy.
432 * configure.in: Make SET_LIB_PATH substitution more autoconfy.
433 * configure.in: Make RPATH_ENVVAR substitution more autoconfy.
434 * Makefile.in: Regenerate.
438 * Makefile.tpl: Eliminate reference to all-gui, all-libproc.
439 * Makefile.in: Regenerate.
441 * Makefile.def: Remove order dependency comments.
442 * Makefile.tpl: Add explicit install-install dependencies.
443 * Makefile.in: Regenerate.
445 * Makefile.tpl: Remove material now in src-release. (Finally!)
446 * Makefile.in: Regenerate.
448 * configure: Restore my original patch by syncing with gcc version.
450 * Bring following over from gcc:
454 * configure.in (s390*-*-linux*): Enable libgcj.
458 * Makefile.in: Regenerate. This really ought to fix things. :sigh:
462 * configure: Move stray lines back to where they belong.
466 * Makefile.tpl: Insert configure-target target, for src-release.
468 * configure: Finish reverting change which Andrew Cagney started
469 reverting. Should fix bustage.
471 * src-release (BINUTILS_SUPPORT_DIRS): Add cpu directory.
472 * src-release: New file. Contains material for making net
473 releases for gdb, binutils, et al., formerly in Makefile.in.
477 * cpu: New top level directory. Intended to hold input files for
478 CGEN which have FSF copyright assignment.
479 * Makefile.in (BINUTILS_SUPPORT_DIRS): Add cpu directory.
483 Revert below (note that src does not contain Makefile.tpl):
484 * Makefile.tpl: Make subsituted variables more autoconfy.
485 * Makefile.in: Regenerate.
489 * configure: Revert accidentally applied changes.
491 * Makefile.tpl: Make more autoconf-friendly.
492 * Makefile.in: Regenerate.
493 * configure: Make substitution more autoconf-like.
497 * configure.in (arm-*-coff, strongarm-*-coff, xscale-*-coff): Use a
498 single entry to handle all these.
499 (arm-*-elf, strongarm-*-elf, xscale-*-elf): Likewise. Also enable
500 libjava on arm-*-elf.
504 * configure.in (powerpc-*-darwin*): Don't configure BFD, TK, or the
505 things that depend on them.
509 * Makefile.tpl: Make subsituted variables more autoconfy.
510 * Makefile.in: Regenerate.
511 * configure: Make seds more autoconfy.
515 * Makefile.tpl: Rewrite substituted lines to look autoconfy.
516 * Makefile.in: Regenerate.
517 * configure.in: Rewrite sed statements to look autoconfy.
519 * Makefile.tpl: Autogenerate *-target-* lists, dependencies of
520 all-target-foo on configure-target-foo.
521 * Makefile.def: Ditto.
522 * Makefile.in: Rebuild.
526 * Makefile.def: New file.
527 * Makefile.tpl: New file.
528 * Makefile.in: Generate from Makefile.tpl with 'autogen Makefile.def'.
530 * configure.in: Minor rearrangement. Simplify tests.
534 * configure.in (with_headers): Skip copy if value is "yes".
535 (with_libs): Likewise.
539 * configure.in (*-*-netbsd*): Use noconfigdirs, not skipdirs.
540 * configure.in (sh*-*-pe*): Ditto.
541 * configure.in (mips*-*-pe*): Ditto.
542 * configure.in (*arm-wince-pe): Ditto.
544 * configure.in: Rearrange.
548 * Import these changes from the config master repository:
552 * config.sub: Add tic4x target.
556 * config.guess: Detect NSR-D machines for nsr-tandem-nsk.
561 * COPYING.NEWLIB: More updates.
565 * COPYING.NEWLIB: Update.
569 * texinfo/texinfo.tex: Import version 2002-06-04.06.
571 * config.guess: Import version 2002-08-23.
572 * config.sub: Import version 2002-08-22.
576 * Makefile.in (GCC_FOR_TARGET): Prepend STAGE_CC_WRAPPER.
577 * configure.in (CC_FOR_TARGET, GCJ_FOR_TARGET, CXX_FOR_TARGET,
578 CXX_FOR_TARGET_FOR_RECURSIVE_MAKE): Likewise.
582 * configure.in (hppa*-*-openbsd*): Treat like hppa*-*-*elf*.
586 * configure.in (mips*-*-linux*): Don't skip target-libffi.
590 * configure.in: Move generic linux case to end. Copy generic
591 linux noconfigdirs to mips*-*-linux* entry and new
592 powerpc64*-*-linux* entry. Add target-libffi for the latter.
596 * MAINTAINERS: Clarify on config.guess and config.sub, and add
597 one instance of them which was missed to the list to update.
601 * config.guess: Update to 2002-07-09 version.
602 * config.sub: Update to 2002-07-03 version.
606 * configure.in: Remove two redundant tests.
610 * configure.in (mips*-*-irix6*o32): Enable stabs.
614 * configure.in: Don't build grez.
615 * Makefile.in: Ditto.
617 * Makefile.in: Remove references to bsp, cygmon, libstub.
618 * configure.in: Ditto.
620 * configure.in: Remove leftover reference to gdbtest.
624 * configure.in (gxx_include_dir): Change to match versioned
625 C++ headers if --enable-version-specific-runtime-libs is used.
629 * ltcf-cxx.sh (hpux*): Modify to support ia64-*-hpux*.
633 * configure.in: Make --without-x work.
637 * contrib: New directory. Created to contain a copy of the
638 texi2pod.pl script so that it is in the same place as the version in
643 * configure.in: Rearrange target Makefile fragment collection.
645 * Makefile.in: Don't try to build gdbtest, tgas, ispell, inet, or
647 * configure.in: Ditto.
651 * Makefile.in: Eliminate 'apache' targets.
652 * configure.in: Eliminate 'apache' targets.
654 * configure.in: Eliminate redundant tests. Reorganize.
656 * Makefile.in: Eliminate last reference to LIBGCC1_TEST.
658 * config-ml.in: Eliminate references to Cygnus configure.
660 * Makefile.in: Eliminate references to building emacs.
664 * configure.in: Add support for ip2k.
668 * configure.in (host_tools): Remove cgen.
670 * Makefile.in (all-cgen): Remove; runs from its source directory.
671 (check-cgen, install-cgen, clean-cgen): Likewise.
672 (all-opcodes): No not depend on all-cgen.
677 * configure.in: Fix AIX configury bug.
681 * configure.in: Replace ${topsrcdir} with ${srcdir}.
683 * configure.in: Move definition of libstdcxx_flags right above
684 usage, rather than way earlier.
686 * configure.in: Pull definition of is_cross_compiler earlier.
688 * configure.in: Rearrange a little.
690 * configure.in: Remove references to librx.
691 * Makefile.in: Remove references to librx.
695 * configure.in: Eliminate ${gasdir} variable.
699 * configure.in: Add support for frv.
700 * config.sub: Add support for frv.
704 * Makefile.in (CFLAGS_FOR_TARGET): Add -O2.
708 * configure.in (vax-*-netbsd*): Re-enable gas.
712 * Makefile.in: Replace HOST_PREFIX, HOST_PREFIX_1 with BUILD_PREFIX,
713 BUILD_PREFIX_1, to correct nomenclature.
714 * configure: Likewise.
716 * Makefile.in: Eliminate version-specific references to tcl8.1, tk8.1.
717 * configure.in: Eliminate version-specific references to tcl8.1, tk8.1.
721 * config-ml.in: Propogate DESTDIR also.
725 * configure.in (vax-*-netbsd*): Don't build gas for this
730 * configure.in (noconfigdirs): Don't compile libiberty, libstdcxx
735 * config.sub: Add DLX target.
739 * config.guess: Update to 2002-05-22 version.
740 * config.sub: Likewise.
744 * Makefile.in: Allow for PWDCMD to override hardcoded pwd.
745 * config-ml.in: Likewise.
746 * configure: Likewise.
747 * configure.in: Likewise.
751 * configure.in: Simplify makefile fragment collection.
753 * configure.in: Remove code to build emacs.
755 * configure.in : Remove --srcdir argument from targargs and buildargs
756 (it's always overridden in the Makefile anyway). Rearrange a bit.
758 * configure: Move some logic to configure.in.
759 * configure.in: Move some logic from configure.
763 * COPYING.LIBGLOSS: New file.
767 * Makefile.in: Honour DESTDIR.
771 * configure.in (noconfigdirs): Don't disable libgcj on
772 sparc64-*-solaris* and sparcv9-*-solaris*.
776 * configure.in: Revert 2002-04-18's patch; fixed in libjava.
780 * configure.in (FLAGS_FOR_TARGET): Do not add
781 -B$$r/$(TARGET_SUBDIR)/newlib/ when compiling newlib natively
782 on i[3456]86-*-linux*.
786 * configure.in (noconfigdirs): Replace [ ] with test.
788 * configure.in (noconfigdirs): Do not add target-newlib if
789 target == i[3456]86-*-linux*, and host == target.
793 * config.guess: Updated to 2002-04-26's version.
794 * config.sub: Updated to 2002-04-26's version.
798 * configure.in: delete reference to absent file
800 * configure.in: replace '[' with 'test'
802 * configure.in: Eliminate references to gash.
803 * Makefile.in: Eliminate references to gash.
805 * configure.in: remove useless references to 'pic' makefile fragments.
807 * configure.in: (*-*-windows*) Finish removing.
809 * configure.in: Eliminate redundant test for libgui.
813 * configure.in (h8300*-*-rtems*): Disable libf2c and libgcj.
814 (sparc-*-elf*, sparc64-*-elf*): Disable libgcj.
818 * configure.in: remove references to dead files
822 * configure.in: Disallow configuring libgcj when it is already
823 installed and we're using Solaris 2.8 linker. Do enable libgcj on
824 Solaris 2.8 by default. For PR libgcj/6158.
828 * configure.in: Move default CC setting out of config/mh-* fragments
833 * configure.in: don't even try to configure or make a subdirectory
834 if there's no configure script for it.
838 * MAINTAINERS: Remove chill maintainers.
839 * Makefile.in (CHILLFLAGS): Remove.
841 (TARGET_CONFIGDIRS): Remove libchill.
842 (CHILL_FOR_TARGET): Remove.
843 (BASE_FLAGS_TO_PASS): Don't pass CHILLFLAGS, CHILL_FOR_TARGET, or
845 (CONFIGURE_TARGET_MODULES): Remove configure-target-libchill.
846 (CHECK_TARGET_MODULES): Likewise.
847 (INSTALL_TARGET_MODULES): Likewise.
848 (CLEAN_TARGET_MODULES): Likewise.
849 (configure-target-libchill): Remove.
850 (all-target-libchill): Remove.
851 * configure.in (target_libs): Remove target-libchill.
852 Do not compute CHILL_FOR_TARGET.
853 * libchill: Remove directory.
857 * Makefile.in, configure.in, configure: Sync with gcc, entries
862 * configure.in: Add FLAGS_FOR_TARGET to GCJ_FOR_TARGET.
863 Fixes PR libgcj/6068.
867 * configure.in (i*86-*-netbsdelf*): Don't disable libgcj.
871 * configure.in (alpha*-dec-osf*): Enable libgcj.
875 Fix for: PR bootstrap/3591, target/5676
876 * configure.in (mcore-pe): Disable the configuration of
877 libstdc++-v3 since exceptions are not supported.
881 * configure.in: Enable libgcj for xscale-elf target.
885 * configure.in (libstdcxx_flags): Don't add libstdc++-v3 flags for
887 (CXX_FOR_TARGET): Explain why -shared-libgcc here.
891 * configure.in (CXX_FOR_TARGET): Add -shared-libgcc for
892 libstdc++-v3 and libjava.
896 * gcc/Makefile.in: Removed libstdc++-v3 dependancy for libjava and
901 * config.guess: Updated to 2002-01-30's version.
902 * config.sub: Updated to 2002-02-01's version.
905 * configure.in: Added sh64-*-*.
909 * Makefile.in (all-fastjar): Also depend on all-libiberty.
910 (all-target-fastjar): Also depend on all-target-libiberty.
914 * configure, configure.in: Use temp file for long sed commands.
918 * configure.in (noconfigdirs) [h8300*-*-*, h8500-*-*]: Disable
923 * configure.in (noconfigdirs) [mmix-*-*]: Disable libgcj.
927 * configure.in (noconfigdirs) [cris-*-*]: Disable libgcj.
931 * configure: Handle temporary files securely using mkdir.
935 * configure.in (*-*-linux*): Disable configuration of target-newlib
940 * Makefile.in (EXTRA_TARGET_FLAGS): Pass RANLIB_FOR_TARGET for
945 * Makefile.in (check-c++): Add missing semicolon.
949 * configure.in (sh-*-linux*): New.
953 * configure.in (noconfigdirs): Don't compile libiberty, libstdcxx
954 and libgcj on m68hc11/m68hc12.
958 * Makefile (CFLAGS_FOR_BUILD): New.
959 (EXTRA_GCC_FLAGS): Add CFLAGS_FOR_BUILD.
963 * configure.in (libstdcxx_flags): Do not try to execute
964 libstdc++-v3/testsuite_flags until it exists.
968 * configure.in (libstdcxx_flags): Remove reference to libstdc++.INC.
972 * ltcf-cxx.sh: Add -nostdlib to IRIX 6 archive_cmds.
976 * configure.in: Move *-chorusos target case to the proper switch.
981 * Makefile.in (STAGE1_CFLAGS): Pass down.
985 * config.guess: Add hppa64-linux support. Note for next import that
986 this is already in the master file.
987 * configure.in: Likewise. Accept `parisc' alias for `hppa'.
991 * Makefile.in (DO_X): Do not backslash single-quotes in
992 backquotes (two places).
996 * Makefile.in (DO_X): Quote nested quotes.
1000 * Makefile.in (DO_X): Use double quotes for quoting
1001 "RANLIB=$${RANLIB}".
1005 * configure.in: Only use `lang_requires' for languages athat are
1010 * configure.in: Allow config-lang.in to set `lang_requires' to list
1011 of other required languages.
1015 * Makefile.in: Remove RANLIB definition. Use RANLIB
1016 in RANLIB_FOR_TARGET, EXTRA_HOST_FLAGS, EXTRA_TARGET_FLAGS,
1017 EXTRA_GCC_FLAGS, $(DO_X) targets only when the RANLIB is set.
1022 * Makefile.in (check-c++): Use tabs, not spaces.
1026 * Makefile.in (check-c++): New rule.
1028 * configure.in (target_libs): Remove libg++.
1029 (noconfigdirs): Remove libg++.
1030 (noconfigdirs): Same.
1031 (noconfigdirs): Same.
1032 (noconfigdirs): Same.
1034 * config-ml.in: Remove libg++ references.
1036 * Makefile.in (TARGET_CONFIGDIRS): Remove libio, libstdc++, libg++.
1037 (ALL_TARGET_MODULES): Same.
1038 (configure-target-libg++): Remove.
1039 (all-target-libg++): Remove.
1040 (configure-target-libio): Remove.
1041 (all-target-libio): Remove.
1042 (check-target-libio): Remove.
1044 (libg++.tar.bz2): Remove.
1045 (all-target-cygmon): Remove libio.
1046 (all-target-libstdc++): Remove.
1047 (configure-target-libstdc++): Remove.
1048 (TARGET_LIB_PATH): Remove libstdc++.
1049 (ALL_GCC_CXX): Remove libstdc++.
1050 (all-target-gperf): Correct.
1054 * configure: Introduce GCJ_FOR_TARGET.
1055 * configure.in: Ditto.
1056 * Makefile.in: Ditto.
1060 * configure.in: for *-chorusos, don't config target-newlib and
1065 Remove V2 C++ library.
1066 * configure.in: Remove --enable-libstdcxx_v3 support.
1070 * configure.in (target_makefile_frag) [alpha*-*]: Use mt-alphaieee.
1074 * configure.in: Allow libgcj to be built on Sparc Solaris.
1078 * configure.in: Enable libgcj on several additional platforms.
1082 * configure.in: Enable libgcj for linux targets.
1086 * Makefile.in (CONFIGURE_TARGET_MODULES): Pass back configuration
1087 failures of subdirectories.
1091 * configure: handle DOS-style absolute paths.
1095 * configure.in: remove supported directories from $noconfigdirs for DJGPP.
1099 * Makefile.in (BASE_FLAGS_TO_PASS): Alphabetize.
1100 (libstdcxx_incdir): Pass down.
1101 * config.if: Remove expired bits for cxx_interface, add stub.
1102 (libstdcxx_incdir): Add variable for g++ include directory.
1103 * configure.in (gxx_include_dir): Use it.
1107 * configure.in: Handle lang_dirs.
1111 * configure.in: Disable libgcj for any target not specifically
1112 listed. Disable libgcj for x86 and Alpha Linux until compatible
1117 * Makefile.in (local-distclean): Also remove fastjar.
1121 * configure.in: Define libgcj. Disable libgcj target libraries for
1126 * configure.in (target_libs): Revert 2000-12-08 patch.
1127 (noconfigdirs): Added target-libjava.
1131 * Makefile.in: handle DOS-style absolute paths.
1135 * Makefile.in (TARGET_CONFIGDIRS): Wrong place. Removed note about
1137 * configure.in (target_libs): Removed `target-libjava'.
1141 * Makefile.in (TARGET_CONFIGDIRS): Added note about libjava.
1142 (ALL_MODULES): Added fastjar.
1143 (NATIVE_CHECK_MODULES, INSTALL_MODULES, CLEAN_MODULES): Likewise.
1144 (all-target-libjava): all-fastjar replaces all-zip.
1145 (all-fastjar): Added.
1146 (configure-target-fastjar, all-target-fastjar): Likewise.
1147 * configure.in (host_tools): Added fastjar.
1151 * Makefile.in (local-distclean): Remove leftover built files.
1155 * configure.in (enable_libstdcxx_v3): Fix typo,
1156 libstd++ -> libstdc++.
1160 * configure: Provide the original toplevel configure arguments
1161 (including $0) to subprocesses in the environment rather than
1162 through gcc/configargs.h.
1166 * configure: Turn on libstdc++ V3 by default.
1170 * configure (gcc/configargs.h): Only create if there is a build GCC
1175 * configure: Save configure arguments to gcc/configargs.h.
1179 * Makefile.in (bootstrap): avoid recursion if subdir missing
1181 (do-proto-toplev): ditto
1185 * configure.in: Do not build byacc for hppa64. Provide paths to the
1186 X11 libraries for hppa64.
1190 * Makefile.in (all-gcc): Depend on all-zlib.
1191 (CLEAN_MODULES): Add clean-zlib.
1192 (ALL_MODULES): Add all-zlib.
1193 * configure.in (host_libs): Add zlib.
1197 * configure.in (FLAGS_FOR_TARGET): Use $target_configdirs and
1198 $targargs to tell whether newlib is going to be built.
1200 * configure.in [disable-libstdcxx-v3] (libstdcxx_flags): Search
1201 $$r/TARGET_SUBDIR/libio for _G_config.h.
1205 * configure.in (libstdcxx_flags): Remove -isystem $$s/libio/stdio.
1207 * configure: Make enable_threads and enable_shared defaults
1208 explicit. Substitute enable_threads into generated Makefiles.
1209 * configure.in: Accept *-*-linux* not just *-*-linux-gnu*.
1210 * libtool.m4: Accept *-*-linux* not just *-*-linux-gnu*.
1214 * configure.in: Re-enable all references to libg++ and librx.
1218 * configure.in: Add *-*-freebsd* configurations.
1222 * Makefile.in (do-tar-bz2): Delete rule. Replace with ...
1223 (do-tar, do-bz2): New rules.
1224 (taz): Update. Replace do-tar-bz2 with do-tar and do-bz2.
1225 (gdb-tar): New rule.
1226 (gdb-taz): Rewrite. Use gdb-tar and do-bz2.
1227 (insight_dejagnu.tar): New rule.
1228 (insight.tar): New rule.
1229 (gdb+dejagnu.tar): New rule.
1230 (gdb.tar): New rule.
1234 * MAINTAINERS: Update dejagnu/
1238 * ltmain.sh (relink_command): Fix typo in previous change.
1242 * ltmain.sh (taglist): Initialized. Don't let `CC' tag out of it.
1243 (relink_command): Added --tag flags.
1244 (mode=install): If relinking fails; error out.
1248 * Makefile.in (NOTPARALLEL): New. Use it instead of explicit
1250 (do-check): Rename from check.
1251 (check): Allow parallel check.
1255 * Makefile.in (.NOTPARALLEL): Add fake tag.
1259 * configure.in: Enable gprof for mips*-*-linux*.
1263 * configure.in (libstdcxx_flags): Don't add libstdc++-v3 flags for
1265 (CXX_FOR_TARGET): Add -shared-libgcc for libstdc++-v3 and libjava.
1269 * texinfo/texinfo.tex: Update to version 2002-02-14.08.
1273 * config.guess: Import from master sources, rev 1.232.
1274 * config.sub: Import from master sources, rev 1.246.
1278 * Makefile.in (MAKEINFO): Don't assume makeinfo will be built just
1279 because its Makefile is there; test for the executable instead.
1283 Contribute sh64-elf.
1285 * configure.in: Added sh64-*-*.
1289 * COPYING.NEWLIB: Remove advertising clause from
1290 Berkeley and Red Hat licenses.
1294 * Makefile.in: Add all-tix to deps for all-snavigator
1295 so that tix is built when building snavigator.
1299 * config.guess: Import from master sources, rev 1.229.
1300 * config.sub: Import from master sources, rev 1.240.
1305 * libtool.m4 (HPUX_IA64_MODE): Set to 32 or 64 based on ABI.
1306 (lt_cv_deplibs_check_method, lt_cv_file_magic_cmd,
1307 lt_cv_file_magic_test_file): Set to appropriate values for HP-UX
1309 * ltcf-c.sh (archive_cmds, hardcode_*): Ditto.
1310 * ltconfig (shlibpath_*, dynamic_linker, library_names_spec,
1311 soname_spec, sys_lib_search_path_spec): Ditto.
1315 * configure.in (*-*-netbsd*): New. Skip target-newlib,
1316 target-libiberty, and target-libgloss. Skip Java-related
1317 libraries if not supported for NetBSD on target CPU.
1321 * configure.in: Import StrongARM and XScale target_configdirs from
1326 * config.guess: Import from master sources, rev 1.225.
1327 * config.sub: Import from master sources, rev 1.238.
1329 * MAINTAINERS: Updated notes on config.guess and config.sub.
1333 * configure.in (ia64*-*-hpux*): New target for IA64 HP-UX,
1334 ld and gdb are not supported.
1338 * Change reference to Cygnus Solutions to be Red Hat.
1342 * COPYING.NEWLIB: Update generic copyright date.
1346 * configure.in: Remove target-bsp and target-cygmon from arm builds.
1347 Allow target-libgloss to be built for arm, strongarm, and xscale.
1351 * MAINTAINERS: Update URL for config.* scripts.
1355 * config.sub: Import latest version.
1356 * config.guess: Likewise.
1360 * configure.in (FLAGS_FOR_TARGET): Remove -nostdinc and -isystem
1361 options for i[3456]86-pc-linux* native builds.
1365 * MAINTAINERS: gcc adopts symlink-tree, refer more to
1368 Import this patch from gcc:
1372 * symlink-tree: handle DOS-style absolute paths.
1377 When build != host, create libiberty for the build machine.
1379 * Makefile.in (TARGET_CONFIGARGS, BUILD_CONFIGARGS): Replace
1381 (ALL_BUILD_MODULES_LIST, BUILD_CONFIGDIRS, BUILD_SUBDIR):
1383 (ALL_BUILD_MODULES, CONFIGURE_BUILD_MODULES): New variables
1385 (all.normal): Depend on ALL_BUILD_MODULES.
1386 (CONFIGURE_TARGET_MODULES rule): Use TARGET_CONFIGARGS.
1387 (all-build-libiberty): Depend on configure-build-libiberty.
1389 * configure: Calculate and substitute proper value for
1391 * configure.in: Create the build subdirectory.
1392 Calculate and substitute TARGET_CONFIGARGS (formerly
1393 CONFIG_ARGUMENTS); also BUILD_SUBDIR and BUILD_CONFIGARGS (new).
1397 * config.sub: Update to version 1.232 on subversion.
1401 * Makefile.in (do-proto-toplev): Use msgfmt to generate .gmo
1402 files from .po files for a distribution.
1406 * COPYING.NEWLIB: Mention preserved notice in specific parts.
1410 Merged from net gcc:
1412 * ltcf-c.sh: Use $objext, not $ac_objext.
1414 * ltcf-cxx.sh: Add support for GNU.
1416 * ltcf-c.sh: Don't disable shared libraries for AIX5/IA64. Preserve
1417 default settings if using GNU tools with that configuration.
1418 * ltcf-cxx.sh: Ditto.
1419 * ltcf-gcj.sh: Ditto.
1421 * ltconfig: Set max_cmd_len to a maximum of 512Kb, as it seems some
1422 HPUX 11.0 systems have trouble with 1MB. Mark as gcc-local.
1423 * ltmain.sh: Mark as gcc-local.
1427 * Makefile.in (all-bison): Revert 2001-10-24.
1428 Don't depend on texinfo.
1432 * COPYING.NEWLIB: Add BSD-style license/copyright blurb for my work.
1436 * configure.in (--enable-languages): Be more permissive about
1437 syntax. Check for empty lists better. Warn about $LANGUAGES.
1441 * Makefile.in (MAKEINFO): Use "missing" for makeinfo older than 4.0.
1445 Makefile.in (all-bison): Don't depend on texinfo.
1449 * gettext.m4: Test po/POTFILES.in exists before trying to read.
1453 * Makefile.in (configure-target-gperf): Depend on $(ALL_GCC_CXX).
1457 * config.sub, config.guess: Import latest from subversions.
1461 * Makefile.in (AS_FOR_TARGET, LD_FOR_TARGET,
1462 DLLTOOL_FOR_TARGET, WINDRES_FOR_TARGET, AR_FOR_TARGET,
1463 RANLIB_FOR_TARGET, NM_FOR_TARGET): Don't use double quotes to
1464 avoid quotes nesting problems.
1465 (NATIVE_CHECK_MODULES): Ditto, just for consistency.
1466 (DO_X): Export only variables that are set.
1470 * configure.in (sparc-sun-solaris2*): Don't use /usr/bin/which on
1471 Solaris when testing for the /usr/ucb/cc compiler; it has incorrect
1472 semantics. Use the shell built-in "type" command instead.
1476 * config.sub: Reverted the earlier change, this version is not the
1481 * config.sub: Change machine triplets from mipsel*-* to mips*el-*.
1482 Add support for mips64.
1486 * configure.in: Enable libstdc++-v3 for h8300 targets.
1491 * config.sub: Add support for mipsisa32.
1495 * config.sub, config.guess: Import latest from subversions.
1499 * config.sub, config.guess: Import latest from subversions.
1503 * MAINTAINERS: Clarify libiberty merge rules and procedures.
1507 * Makefile.in: Revert 2001-06-17.
1508 (VER): If AM_INIT_AUTOMAKE uses BFD_VERSION, get version from bfd/.
1512 * Makefile.in (gas.tar.bz2): Pass TOOL=bfd PACKAGE=gas to make.
1513 (gas+binutils.tar.bz2): Likewise.
1514 (binutils.tar.bz2): Pass TOOL=bfd PACKAGE=binutils to make.
1518 * Makefile.in (VER): When present, extract the version number from
1519 the file version.in.
1523 * Makefile.in (AS_FOR_TARGET, LD_FOR_TARGET, NM_FOR_TARGET): If
1524 gcc/xgcc is built, use -print-prog-name to find out the program
1529 * ltcf-c.sh (archive_cmds, archive_expsym_cmds) [solaris,
1530 with_gcc]: Use `gcc -shared' to build a shared library.
1534 * ltcf-c.sh (archive_cmd) [hpux, with_gcc]: Use gcc to link shared
1539 * ltcf-cxx.sh (osf3/osf4/osf5): Support creation of C++ shared
1540 libraries when using g++ with native linker.
1544 * ltconfig, ltmain.sh: Upgrade to libtool 1.4a 1.641.2.256.
1548 * configure.in : enable ld for aix
1552 * ltcf-cxx.sh (allow_undefined_flag, no_undefined_flag)
1553 [aix4*|aix5*]: Prepend blank.
1557 * ltconfig, ltmain.sh, libtool.m4, ltcf-c.sh, ltcf-cxx.sh,
1558 ltcf-gcj.sh: Upgraded to libtool 1.4a 1.641.2.254. Rebuilt a number
1559 of subdir/configure scripts to use the new libtool.m4.
1563 * config.if (libc_interface): Set to -libc6.2- for cross
1564 compiling to Linux/glibc 2.2.
1568 * configure.in (noconfigdirs) [*-cygwin*, *-mingw*, *-beos]: Disable
1573 * configure.in (noconfigdirs): Don't reset it from scratch in the
1574 target case; only append to it.
1578 * configure.in (noconfigdirs) [hppa*-*-*, mips*-*-irix6*,
1579 sparc-*-solaris2.8]: Disable ${libgcj}.
1583 * configure.in (libgcj_saved): Copy from $libgcj.
1584 (libgcj): Zero out if --enable-libgcj; add to noconfigdirs is
1589 * ltconfig, ltmain.sh, ltcf-cxx.sh: Upgraded to libtool 1.4a
1594 * ltconfig, ltmain.sh, libtool.m4, ltcf-c.sh, ltcf-cxx.sh,
1595 ltcf-gcj.sh: Upgraded to libtool 1.4a 1.641.2.226.
1599 * Makefile.in (CXX_FOR_TARGET_FOR_RECURSIVE_MAKE, RECURSE_FLAGS):
1601 (bootstrap, cross): Use RECURSE_FLAGS.
1602 * configure.in: Subst CXX_FOR_TARGET_FOR_RECURSIVE_MAKE.
1606 * configure.in (CXX_FOR_TARGET): Use xgcc for libstdc++-v3.
1610 * README-maintainer-mode: Add note about inability to use "make
1611 distclean" in maintainer mode.
1617 * ltcf-c.sh: Clear ac_cv_prog_cc_pic for DJGPP. Do not add
1618 '-DPIC' to ac_cv_prog_cc_pic for DJGPP.
1619 * ltcf-cxx.sh: Likewise.
1620 * ltcf-gcj.sh: Likewise.
1624 * config.sub, config.guess: Import latest from subversions.
1628 * ltconfig, ltmain.sh, libtool.m4, ltcf-c.sh, ltcf-cxx.sh,
1629 ltcf-gcj.sh: Upgraded to libtool 1.4a 1.641.2.198.
1633 * Makefile.in: all-m4 depends on all-texinfo.
1637 * Makefile.in (ALL_GCC, ALL_GCC_C, ALL_GCC_CXX): Set before use.
1641 * COPYING.NEWLIB: Remove DJ Delorie's address because it is no
1646 * configure.in (noconfigdirs): Allow configuration of texinfo
1651 * config.guess: Add linux target for S/390.
1652 * config.sub: Likewise.
1653 * configure.in: Likewise.
1657 * configure: Output host type to stdout, not stderr.
1661 * config.guess: Import from subversions.gnu.org (revision 1.181).
1662 * config.sub: Import from subversions.gnu.org (revision 1.199).
1666 * config.guess: Handle hppa64-linux systems.
1670 * ltcf-cxx.sh (ac_cv_prog_cc_pic_works, ac_cv_prog_cc_static_works):
1671 Don't unset, it's non-portable and no longer necessary, set to empty
1676 * ltconfig: Shell portability fix for the tagname validity check.
1680 * ltcf-cxx.sh: Use parentheses around eval $ac_compile.
1684 * ltcf-c.sh (ld_shlibs) [aix5*]: Disable on unknown CPU types.
1685 * ltcf-cxx.sh, ltcf-gcj.sh: Likewise.
1689 * ltmain.sh (TAG disable-shared, TAG disable-static): Make sure we
1690 keep at least one of build_libtool_libs or build_old_libs set to
1695 * ltcf-gcj.sh (lt_simple_link_test_code): Remove stray `(0)'.
1696 * libtool.m4 (_AC_LIBTOOL_GCJ): Pass $CPPFLAGS on.
1700 * Makefile.in (ETC_SUPPORT): Also add configbuild.* and configdev.*.
1704 * Makefile.in (ETC_SUPPORT): Add configure.texi and associated info
1709 * COPYING.NEWLIB: Put into source repository.
1713 * configure.in (host_tools): Add sid.
1714 Always configure cgen.
1715 * Makefile.in (all-sid): New target.
1716 (check-sid, clean-sid, install-sid): Likewise.
1720 * config.sub, config.guess: Update from subversions.
1724 * configure.in: Disable language-specific target libraries for
1725 languages that aren't enabled.
1729 * configure.in (xscale-elf): Add target.
1730 (xscale-coff): Add target.
1731 (c4x, c5x, tic54x): Move after ARM targets.
1735 * ltcf-gcj.sh: Added file, required by 2000-11-18 merge.
1739 * ltcf-cxx.sh: Added file, required by 2000-11-18 merge.
1743 * Makefile.in: Merge with GCC and libgcj.
1744 (ALL_GCC_C, ALL_GCC_CXX): New macros. Use them as dependencies of
1745 configure-target-<library> when their configure scripts need the C
1746 or C++ library to have already been built to work properly.
1747 (do_proto_toplev): Set them to an empty string.
1751 * Makefile.in (HOST_LIB_PATH, TARGET_LIB_PATH): New macros.
1752 (REALLY_SET_LIB_PATH): Use them.
1756 * config.sub: Add support for Sun Chorus
1760 * config.sub: Add support for the *-storm-chaos OS.
1764 * configure.in (noconfigdirs): Don't compile some
1765 of the libraries for 68HC11 & 68hc12 targets.
1769 * ltconfig, ltmain.sh, libtool.m4: Updated from libtool
1770 multi-language branch, to work around Solaris' /bin/sh bug. Rebuilt
1771 all affected `configure' scripts.
1775 * Makefile.in (DEVO_SUPPORT): Added gettext.m4, libtool.m4 and
1780 * config.sub, config.guess: Update from subversions.
1784 * Makefile.in (all-zlib): Added dummy target.
1786 * ltconfig, ltmain.sh, libtool.m4, ltcf-c.sh: Updated from libtool
1787 multi-language branch.
1791 * Makefile.in (all-bootstrap): Added all-texinfo and all-zlib.
1792 (bootstrap*): Depend on all-bootstrap.
1796 * configure.in (FLAGS_FOR_TARGET): Use -nostdinc even for Canadian
1797 crosses, but add gcc/include to the header search path for them.
1801 * ltconfig, ltmain.sh: Updated from libtool multi-language branch.
1802 * libtool.m4, ltcf-c.sh: Copied from libtool multi-language branch.
1803 * gettext.m4: New file, extracted from aclocal.m4.
1807 * config-ml.in (CC, CXX): Avoid trailing whitespace.
1808 (LD_LIBRARY_PATH, SHLIB_PATH): Adjust for multilibs and export to
1813 * Makefile.in (ALL_MODULES): Add all-cgen.
1814 (CROSS_CHECK_MODULES,INSTALL_MODULES,CLEAN_MODULES): Similarily.
1815 (all-cgen): New target.
1816 (all-opcodes,all-sim): Depend on all-cgen.
1817 * configure.in (host_tools): Add cgen.
1818 Only configure cgen if --enable-cgen-maint.
1822 * config-ml.in (CC, CXX): Don't introduce a leading space.
1826 * configure.in (libstdcxx_flags): Use
1827 libstdc++-v3/src/libstdc++.INC.
1831 * configure.in (libstdcxx_flags): Use libstdc++-v3/src/INCLUDES.
1835 * configure.in (CC_FOR_TARGET, CHILL_FOR_TARGET,
1836 CXX_FOR_TARGET): Add -B$$r/gcc/ here.
1837 (FLAGS_FOR_TARGET): Not here.
1838 (CHILL_FOR_TARGET, CXX_FOR_TARGET): Don't check the list of languages.
1842 * configure.in (FLAGS_FOR_TARGET): invert test for xgcc, should mean
1843 "if we're also building gcc, and it's a gcc that will run on the
1844 build machine, we want to use its includes instead of the system's
1849 * configure.in (libstdcxx_flags): Don't use `"'.
1851 * config-ml.in: Adjust multilib search paths to the
1852 appropriate multilib tree.
1856 * configure.in (CHILL_FOR_TARGET, CXX_FOR_TARGET): Convert blanks to
1857 commas in $LANGUAGES.
1861 * configure.in (qCXX_FOR_TARGET): Use echo instead of expr.
1865 * configure.in (qCXX_FOR_TARGET): Quote `&' characters in
1866 CXX_FOR_TARGET for sed.
1870 * configure.in (CC_FOR_TARGET, CHILL_FOR_TARGET, CXX_FOR_TARGET):
1871 Do not override if already set in the environment or in configure.
1872 Don't duplicate $(FLAGS_FOR_TARGET) if it already appears in them.
1873 (FLAGS_FOR_TARGET): Don't use host directories on Canadian crosses.
1877 * Makefile.in (FLAGS_FOR_TARGET): New macro.
1878 (GCC_FOR_TARGET): Use it.
1879 (CC_FOR_TARGET, CXX_FOR_TARGET, CHILL_FOR_TARGET): Now defined...
1880 * configure.in: ... here.
1881 (FLAGS_FOR_TARGET): Define. Add ld build dir to -L path.
1882 (libstdcxx_flags): Define and append to CXX_FOR_TARGET.
1886 * Makefile.in (configure-target-libf2c): Depend on $(ALL_GCC).
1887 (configure-target-libchill, configure-target-libobjc): Likewise.
1889 * configure.in: Use the same cache file for all target libs.
1890 * config-ml.in: But different cache files per multilib variant.
1894 * configure (topsrcdir): Don't use dirname.
1898 * configure.in: Remove all references to libg++ and librx.
1900 * configure, configure.in, Makefile.in: Unify gcc and binutils.
1904 * config.sub: Update to subversions version 2000-07-06.
1908 * configure.in (host_makefile_frag): Use mh-ia64pic on IA-64 hosts.
1909 (target_makefile_frag): Use mt-ia64pic on IA-64 targets.
1913 * symlink-tree: Check number of arguments.
1917 * texinfo/texinfo.tex: Update to version 2000-05-28.15.
1921 * Makefile.in (CXX_FOR_TARGET): Add libstdc++ to the library
1922 search path for a g++ extracted from the build tree. This
1923 will allow link tests run by configure scripts in
1924 subdirectories to succeed.
1928 * ltconfig: Add support for mips-dde-sysv4.2MP
1932 * ltconfig: Check for host_os beeing one of `cygwin', `mingw' or
1933 `os2'. Force ac_cv_exeext to be ".exe" in that case.
1937 * configure.in (noconfigdirs): Set noconfigdirs for tic54x target.
1938 * config.sub: Add tic54x target.
1942 * README-maintainer-mode: New file: Contains notes on using
1943 --enable-maintainer-mode with binutils.
1947 * texinfo/texinfo.tex: Update. Version from makeinfo 4.0.
1951 * config.sub: Import CVS version 1.167 Tue May 30 09:00:07 2000.
1952 * config.guess: Import CVS version 1.148 Tue May 30 09:00:06 2000
1956 * Makefile.in (CC_FOR_TARGET): Make sure as/ld in the gcc
1957 directory are used if they exist. Make sure
1958 $(build_tooldir)/include is searched for header files,
1959 $(build_tooldir)/lib/ for library files.
1960 (GCC_FOR_TARGET): Likewise.
1961 (CXX_FOR_TARGET): Likewise.
1965 * configure.in (hppa*64*-*-*): Do build ld for this configuration.
1969 * Makefile.in (configure-target-libiberty): Depend on
1970 configure-target-newlib.
1974 * configure.in, Makefile.in: Merge all libffi-related
1975 configury stuff from the libgcj tree.
1980 * Makefile.in (do-tar-bz2, do-md5sum): Skip CVS directories.
1985 * Makefile.in (do-djunpack): New target. Update djunpack.bat with
1986 current version information. Add to proto-toplev directory.
1987 (gdb-taz): Build do-djunpack.
1991 * configure.in: Special case powerpc*-*-aix* target_makefile_frag.
1995 * ltmain.sh: Preserve in relink_command any environment
1996 variables that may affect the linker behavior.
2000 * config.sub (basic_machine): Recognize hppa64 as a valid cpu type.
2004 * configure.in (ia64*-*-elf*): Add gdb and friends to noconfigdirs.
2008 * djunpack.bat: Change the Sed script to replace @V@ in fnchange.lst
2009 with the version name.
2017 * djunpack.bat: New file.
2021 * Makefile.in (taz, gdb-taz, gas.tar.bz2, binutils.tar.bz2,
2022 gas+binutils.tar.bz2, libg++.tar.bz2, gnats.tar.bz2, gdb.tar.bz2,
2023 dejagnu.tar.bz2, gdb+dejagnu.tar.bz2, insight.tar.bz2,
2024 insight+dejagnu.tar.bz2, newlib.tar.bz2): Pass MD5PROG to sub-make.
2028 * config.sub (case $basic_machine): Change default for "ibm-*"
2033 * Makefile.in (gdb-taz): New target. GDB specific archive.
2034 (do-md5sum): New target.
2036 (PACKAGE): Default to TOOL.
2037 (VER): Default to a shell script.
2038 (taz): Rewrite target. Move real work to do-proto-toplev. Include
2039 md5 checksum generation.
2040 (do-proto-toplev): New target. Create $(PACKAGE)-$(VER) link.
2041 (do-tar-bz2): Delete creation of $(PACKAGE)-$(VER) link.
2042 (gdb.tar.bz2, dejagnu.tar.bz2, gdb+dejagnu.tar.bz2,
2043 insight.tar.bz2): Use gdb-taz to create archive.
2047 * configure (warn_cflags): Delete.
2052 * configure.in (enable_libstdcxx_v3): Add.
2053 (target_libs): Add bits here to switch between libstdc++-v2 and
2055 * config.if: And this file too.
2056 * Makefile.in: Add libstdc++-v3 targets.
2060 * config.sub (d30v): Add d30v as a basic machine type.
2064 * configure.in: -linux-gnu*, not -linux-gnu.
2068 * Makefile.in (taz): Set PACKAGE to TOOL when not defined.
2069 (do-tar-bz2): Replace TOOL with PACKAGE.
2070 (gdb.tar.bz2): Remove GDBTK from GDB package.
2071 (gdb+dejagnu.tar.bz2, insight.tar.bz2, insight+dejagnu.tar.bz2,
2072 dejagnu.tar.bz2): New packages.
2076 * configure.in: Add entry for mips*-*-linux*, move catch all
2077 *-*-*linux* entry below this one.
2081 * ltconfig, ltmain.sh: Update to libtool 1.3.4.
2085 * config.sub: Support an OS of "wince".
2089 * config.guess, config.sub: Updated to match config's 2000-02-15
2094 * config.sub: Add support for Linux/IBM 370.
2095 * configure.in: Likewise.
2099 * configure.in: Add mips-pe, sh-pe and arm-wince-pe targets.
2103 * config.guess: Guess "cygwin" rather than "cygwin32".
2107 * configure (gcc_version): When setting, narrow search to
2108 lines containing `version_string'.
2112 * config.sub: Add support for avr target.
2116 * config.sub: Add mmix-knuth-mmixware.
2120 * Makefile.in (CC_FOR_TARGET): Add new winsup directory
2121 structure stuff to -L library search.
2122 (CXX_FOR_TARGET): Ditto.
2123 (CROSS_CHECK_MODULES): Fix spelling mistake.
2127 * Makefile.in (CXX_FOR_TARGET): Use g++, not xgcc, to invoke
2132 * configure.in: Don't build some bits for beos.
2136 * Makefile.in (CC_FOR_TARGET): Use newlib libraries as well
2141 * configure.in: Use mt-aix43 to handle *_TARGET defs,
2146 * config.guess (alpha-osf, alpha-linux): Detect ev67.
2147 * config.sub: Accept alphaev[78], alphaev8.
2151 * config.guess, config.sub: Update from autoconf.
2155 * config-ml.in (sparc*-*-*): Disable sparcv9 support if the
2156 necessary libraries are missing.
2160 * configure: Fix quoting inside arguments of eval.
2164 * config-ml.in: Allow suppression of some ARM multilibs.
2168 * config.guess: Add OS/390 match pattern.
2169 * config.sub: Add mvs, openedition targets.
2170 * configure.in (i370-ibm-opened*): New.
2174 * config.sub: Add support for configuring for pj.
2178 * config.sub (maybe_os): Add support for configuring for fr30.
2182 * configure.in: Do not configure or build ld for AIX
2183 platforms. ld is known to be broken on these platforms.
2187 * config-ml.in: Pass compiler flag corresponding to multidirs to
2192 * Makefile.in (LDFLAGS): Define.
2196 * configure.in (i[3456]-*-mingw32*): Don't put gprof in
2198 (*-*-cygwin*): Likewise.
2203 * Makefile.in (GAS_SUPPORT_DIRS): Add mkdep.
2204 (BINUTILS_SUPPORT_DIRS): Add mkdep.
2207 * configure (tmpfile): Change cONf$$ to cNf$$ to avoid an overly
2208 long file name when using DJGPP on MS-DOS.
2212 * config.sub (vxworks case): Use os=-vxworks, not os=vxworks.
2216 * Makefile.in (check-target-libio): Remove all-target-libstdc++
2217 dependency as this causes "make check" to globally "make all"
2221 * configure.in (target_libs): Added target-zlib.
2222 * Makefile.in (ALL_TARGET_MODULES): Added zlib.
2223 (CONFIGURE_TARGET_MODULES): Likewise.
2224 (CHECK_TARGET_MODULES): Likewise.
2225 (INSTALL_TARGET_MODULES): Likewise.
2226 (CLEAN_TARGET_MODULES): Likewise.
2227 (configure-target-zlib): New target.
2228 (all-target-zlib): Likewise.
2229 (all-target-libjava): Depend on all-target-zlib.
2230 (configure-target-libjava): Depend on configure-target-zlib.
2232 * Makefile.in (configure-target-libjava): Depend on
2233 configure-target-newlib.
2234 (configure-target-boehm-gc): New target.
2235 (configure-target-qthreads): New target.
2237 * configure.in (target_libs): Added target-qthreads.
2238 * Makefile.in (ALL_TARGET_MODULES): Added qthreads.
2239 (CONFIGURE_TARGET_MODULES): Likewise.
2240 (CHECK_TARGET_MODULES): Likewise.
2241 (INSTALL_TARGET_MODULES): Likewise.
2242 (CLEAN_TARGET_MODULES): Likewise.
2243 (all-target-qthreads): New target.
2244 (configure-target-libjava): Depend on configure-target-qthreads.
2245 (all-target-libjava): Depend on all-target-qthreads.
2247 * Makefile.in (ALL_TARGET_MODULES): Added libjava, boehm-gc.
2248 (CONFIGURE_TARGET_MODULES): Likewise.
2249 (CHECK_TARGET_MODULES): Likewise.
2250 (INSTALL_TARGET_MODULES): Likewise.
2251 (CLEAN_TARGET_MODULES): Likewise.
2252 (all-target-libjava): New target.
2253 (all-target-boehm-gc): Likewise.
2254 * configure.in (target_libs): Added libjava, boehm-gc.
2258 * Makefile.in (binutils.tar.bz2): Don't pass makeall.bat and
2259 configure.bat in SUPPORT_FILES.
2260 (gas+binutils.tar.bz2): Likewise.
2262 * makeall.bat: Remove; obsolete.
2267 * configure.bat: Remove; obsolete.
2271 * configure: Add -W -Wall to the default CFLAGS when compiling with
2276 * configure.in: Build ld, binutils & gas for hppa*-*-linux-gnu*.
2280 * configure.in: Build ld on IRIX6.
2284 * Makefile.in: Change distribution targets to use bzip2 instead of
2286 (TEXINFO_SUPPORT): Set to just texinfo/texinfo.tex.
2287 (taz): Don't use texinfo/gpl.texinfo or texinfo/lgpl.texinfo.
2291 * config.sub: Add mcore target.
2295 * config.guess (ppc-*-linux-gnu): Also use ld emul elf32ppclinux.
2299 * config.guess (dummy): Changed to $dummy.
2303 * config.sub: Tidied up case statements.
2307 * config.guess: Handle NEC UX/4800. Contributed by Jiro Takabatake
2310 * config.guess: Merge with FSF version. Future changes will be
2311 more accurately recorded in this ChangeLog.
2312 * config.sub: Likewise.
2316 * Makefile.in (GCC_FOR_TARGET): Add -I$(build_tooldir)/include.
2320 * ltmain.sh: [mode link] Always use CC given by ltconfig.
2324 * ltconfig, ltmain.sh: Update to libtool 1.2f.
2328 * configure.in (noconfigdirs): Don't build libstub for arm-elf targets.
2329 (noconfigdirs): Don't build any bsp stuff for for arm-oabi targets.
2330 Bad merge removed these two changes.
2335 * config.guess (interix Alpha): Add.
2339 * configure.in (i?86-*-beos*): Do config gperf; don't config
2340 gdb, newlib, or libgloss.
2344 * config-ml.in: On mips*-*-*, if multidirs contains mabi=64, try to
2345 link a trivial program with -mabi=64. If it fails, remove mabi=64
2350 * config.sub: Set basic_machine to i586 when target_alias = k6-*.
2354 * config.sub: Add support for mcore targets.
2358 * configure.in (d30v-*): Use config/mt-d30v as makefile fragment,
2359 not mt-ospace, in order to shut up assembler warning about using
2360 symbols that are named the same as registers.
2364 * Makefile.in (all-target-cygmon): Added all-target-bsp to the
2365 dependency list for all-target-cygmon.
2369 * config-ml.in: Check $host, not $target, for selective multilibs.
2370 (arm-*-*): Allow disabling of biendian, h/w fp, 26 bit apcs,
2371 thumb interworking, and underscore prefix multilibs.
2375 * missing: Update to version from current automake.
2379 * configure (gxx_include_dir): Removed.
2381 * configure.in (gxx_include_dir): Handle it.
2382 * Makefile.in: Likewise.
2386 * config.sub (mips64vr4111,mips64vr4111el) Add.
2390 * config.guess: Correct typo for detecting ELF on FreeBSD.
2394 * config/mh-go32: Delete.
2395 * config/mh-djgpp: New. Renamed from mh-go32.
2396 * configure.in (pc-msdosdjgpp): Set host_makefile_frag to
2401 * Makefile.in (all-target-bsp): Added all-gcc all-binutils and
2402 all-target-newlib to dependency list for all-target-bsp.
2406 * config.sub: Add i386-uwin support.
2407 * config.guess: Likewise.
2411 * configure.in: cleanup, add mh-*pic handling for arm, special
2412 case powerpc*-*-aix*
2416 * configure.in (noconfigdirs): Removed target-libgloss so libnosys.a
2421 * configure.in: Added bsp support to arm-*-coff and arm-*-elf
2426 * config.sub: Rename CYGNUS LOCAL to EGCS LOCAL
2430 * config.sub: Check for "cygwin*" rather than "cygwin32*"
2434 * config.sub: Fix typo in arm recognition.
2438 * configure.in (noconfigdirs): Changed target_configdirs to
2439 include target-bsp only for m68k-*-elf* and m68k-*-coff*
2440 rather than m68k-*-* since it is not known to work on
2441 m68k-aout. Ditto for arm-*-*oabi.
2445 * configure.in (*-*-windows*): Remove, no longer used.
2446 * config/mh-windows: Ditto.
2450 * config.guess: Automatically recognise ELF on FreeBSD. From Niall
2451 Smart and improved by Andrew Cagney.
2455 * config.guess: Recognize openbsd-*-hppa.
2459 * Makefile.in (REALLY_SET_LIB_PATH): Append $$$(RPATH_ENVVAR)
2460 only if it is not empty.
2466 * config.guess: Modified to recognize uname's armv* syntax.
2468 * config.sub: Modified to recognize uname's armv* syntax.
2472 * configure.in: Added target-bsp for sparclite.
2476 * config.sub: Recognize alphapca5[67] and up to alphaev8.
2480 * configure.in: Add support for strongarm port.
2481 * config.sub: Add support for strongarm target.
2485 * configure.in (*-*-cygwin32*): Use config/mh-cygwin instead of
2486 the old name config/mh-cygwin32.
2491 * configure.in: Do build ld for ix86 Solaris.
2495 * Makefile.in (EXTRA_GCC_FLAGS): Set AR to $AR instead of
2496 $AR_FOR_TARGET. Likewise for RANLIB.
2500 * config.sub (oabi): Recognize.
2501 * configure.in (arm-*-oabi): Handle.
2505 * config.guess: Improve detection of i686 on UnixWare 7.
2509 * config.guess: Add support for i386-pc-interix.
2510 * config.sub: Likewise.
2511 * configure.in: Likewise.
2512 * config/mh-interix: New file.
2516 * Makefile.in: Remove unneeded all-target-libio from
2517 from all-target-winsup target since it is now unneeded.
2518 Add all-target-libtermcap in its place since it is now
2523 * configure.in: makefile stub for cygwin target is probably
2524 unnecessary. Remove it for now.
2525 * config/mt-cygwin: Remove.
2529 * configure.in: libtermcap.a should be built when cygwin is the
2530 target as well as the host.
2531 * config.guess: Allow mixed case in cygwin uname output.
2532 * Makefile.in: Add libtermcap target.
2533 * config/mt-cygwin: New file. libtermcap target info.
2537 * config.sub: Clean up handling of hppa2.0.
2541 * config.guess: Use C code to identify more HP machines.
2545 * config.sub: Handle hppa2.0.
2549 * configure.in: Add cygmon for x86-coff and x86-elf. Configure
2550 cygmon for all sparclite targets, regardless of object format.
2554 * configure.in: Added target-bsp for several target architectures.
2556 * Makefile.in: Added rules for bsp.
2560 * config.guess: Improve detection of hppa2.0 processors.
2564 * config.guess: Recognize FreeBSD using ELF automatically.
2568 * configure (skip-this-dir): Add handling for new shell script, which
2569 might be created by a sub-directory's configure to indicate, this particular
2570 directory is "unwanted".
2571 * Makefile.in ($(CONFIGURE_TARGET_MODULES)): Likewise.
2575 * ltconfig: import from libtool, after changing libtool to
2576 account for the cygwin name change.
2580 * Makefile.in: CC_FOR_TARGET and CXX_FOR_TARGET should also
2581 include newlib/libc/sys/cygwin and newlib/libc/sys/cygwin32.
2585 * configure.in: Add libtermcap to list of cygwin dependencies.
2589 * Makefile.in: modify CC_FOR_TARGET and CXX_FOR_TARGET so that
2590 they include winsup/include when it's a cygwin target.
2594 * configure.in (host_tools): Added zip.
2595 * Makefile.in (all-target-libjava): Depend on all-zip.
2596 (all-zip): New target.
2597 (ALL_MODULES): Added all-zip.
2598 (NATIVE_CHECK_MODULES): Added check-zip.
2599 (INSTALL_MODULES): Added install-zip.
2600 (CLEAN_MODULES): Added clean-zip.
2604 * Makefile.in: lose "32" from comment about cygwin.
2608 * configure.in: Use -Os to build target libraries for the fr30.
2612 * config.sub: Add fr30.
2616 * configure.in: drop "32" from config/mh-cygwin32. Check
2617 cygwin* instead of cygwin32*.
2618 * config.sub: Check cygwin* instead of cygwin32*.
2622 * config.guess: Match any version of Unixware7.
2626 * Makefile.in configure.in: Add the ability to use tcl8.1 and tk8.1
2631 * config.if (cxx_interface, libstdcxx_interface): Do not try to set
2632 these if the appropriate directories and files to not exist.
2636 * Makefile.in (DEVO_SUPPORT): Add config.if.
2640 * configure: Add pattern to replace "build_tooldir"'s
2641 definition in the generated Makefile with "tooldir"'s
2646 * config.sub: Bring back lost sparcv9.
2648 * Makefile.in (all-snvavigator): Remove all-flexlm dependency.
2652 * Makefile.in (CHILL_FOR_TARGET): Mirror recent changes to
2653 CC_FOR_TARGET and friends.
2657 * Makefile.in (build_tooldir): New variable, same as tooldir.
2658 (CC_FOR_TARGET, GCC_FOR_TARGET, CXX_FOR_TARGET): Add
2659 -B$(build_tooldir)/bin/.
2660 (BASE_FLAGS_TO_PASS): Pass build_tooldir down.
2664 * config.sub: Add support for i[34567]86-pc-udk.
2665 * configure.in: Likewise.
2669 * Makefile.in: add bzip2 package building bits for user
2671 * configure.in: ditto
2675 * Makefile.in (TARGET_CONFIGDIRS): Add libobjc.
2676 (ALL_TARGET_MODULES): Add all-target-libobjc.
2677 (CONFIGURE_TARGET_MODULES, CHECK_TARGET_MODULES): Similarly.
2678 (INSTALL_TARGET_MODULES, CLEAN_TARGET_MODULES): Similarly.
2679 (all-target-libchill): Add dependencies.
2680 * configure.in (target_libs): Add libchill.
2684 * configure.in (target_subdir): Remove duplicate line.
2688 * Makefile.in (all-automake): fix dependencies.
2692 * configure.in: Minor cleanups for building in the $(target_alias)
2697 * Makefile.in (bootstrap): Set r and s before make all. Use
2698 BASE_FLAGS_TO_PASS in make all.
2703 * Makefile.in (bootstrap): Pass TARGET_FLAGS_TO_PASS to `make all'.
2707 * config.sub: Fix typo in last change.
2711 * config.sub: Add support for C4x target.
2712 * configure.in: Likewise.
2716 * config.sub: Recognize sparcv9 just like sparc64.
2720 * config.guess: Match "Pent II" or "PentII" for OpenServer.
2724 * config.guess: Correctly identify Pentium II sco boxes.
2726 * config.guess: Fix "tr" code. From Weiwen Liu.
2730 * configure.in: Do not assume x86-svr4 or x86-unixware can handle
2735 * Makefile.in (TARGET_CONFIGDIRS): Add libchill.
2736 (ALL_TARGET_MODULES): Add all-target-libchill.
2737 (CONFIGURE_TARGET_MODULES, CHECK_TARGET_MODULES): Similarly.
2738 (INSTALL_TARGET_MODULES, CLEAN_TARGET_MODULES): Similarly.
2739 (all-target-libchill): Add dependencies.
2740 * configure.in (target_libs): Add libchill.
2744 * config.guess: Avoid assumptions about "tr" behaves when
2745 LANG is set to something other than English.
2749 * configure (gxx_include_dir): Changed to
2750 '${prefix}/include/g++'-${libstdcxx_interface}.
2752 * config.if: New to determine the interfaces.
2756 * config.guess: Detect and handle MPE/IX.
2757 * config.sub: Deal with MPE/IX.
2761 * configure.in: Use mh-aix43.
2765 * configure: Fix --without/--disable cases for gxx-include-dir.
2769 * mdata-sh: Imported. Needed for automake support.
2773 * Makefile.in (taz): Try "chmod -R og=u ." before
2774 "chmod og=u `find . -print`".
2778 * configure.in: Add arm-elf and thumb-elf support.
2782 * Makefile.in: Undo previous patch.
2786 * Makefile.in (INSTALL_TARGET): Move EXTRA_TARGET_HOST_INSTALL_MODULES
2788 (install-no-fixedincludes): and here
2789 (INSTALL_MODULES): ... from here.
2793 * config.sub: Merge with FSF.
2795 * config.guess: Merge with FSF.
2799 * configure (extraconfigdirs): New variable.
2800 (SUBDIRS): Add extraconfigdirs and recurse on them too.
2801 * Makefile.in (all): Move higher in file.
2802 (EXTRA_TARGET_HOST_ALL_MODULES): New variable.
2803 (EXTRA_TARGET_HOST_{INSTALL,CHECK}_MODULES): New variables.
2804 (ALL_MODULES): Add EXTRA_TARGET_HOST_ALL_MODULES.
2805 (CROSS_CHECK_MODULES): Add EXTRA_TARGET_HOST_CHECK_MODULES.
2806 (INSTALL_MODULES): Add EXTRA_TARGET_HOST_INSTALL_MODULES.
2810 * Makefile.in (all-target-libjava): Depend on all-gcc and
2812 (configure-target-libjava): Depend on $(ALL_GCC).
2816 * config.guess: (*-pc-sco3.2v5) Add detection for Pentium II.
2817 (*-pc-unixware7) Add detection for Pentium II, Pentium Pro.
2821 * ylwrap: Change absolute path checks to check for DOS style path
2824 * ylwrap: Don't use a full path name if the source file is in the
2827 * config-ml.in: Default to being verbose, to match Feb 18 change to
2832 Brought over from egcs:
2836 * configure.in (target_subdir): Set to ${target_alias} instead
2841 * configure.in (target_subdir): Set to libraries if enable_multilib.
2845 * Makefile.in ($(CONFIGURE_TARGET_MODULES)): If there are any
2846 multilibs, force reconfiguration the first time we create
2847 multilib.out in a subdirectory, in case TARGET_SUBDIR is `.'.
2851 * configure.in: Strip any --no option from CONFIG_ARGUMENTS, to
2852 avoid confusion with --no-recursion.
2856 * configure.in: Win32 hosts shouldn't use install -x
2857 * install-sh: remove -x option, and special .exe-handling
2862 * config.guess: Recognize i586-pc-beos.
2863 * configure.in: Don't build some bits for beos.
2867 * configure: If CC is set but CFLAGS is not, and CC is gcc, make
2868 CFLAGS default to -O2.
2870 * ltmain.sh: Add some hacks to make SunOS --enable-shared work
2875 * ltmain.sh: Correct install when using a different shell.
2879 * ltconfig, ltmain.sh: Update to libtool 1.2b.
2883 * makefile.vms: Update to build binutils/makefile.vms. Add install
2888 * ltconfig: Update to correct AIX handling.
2892 * Makefile.in (BASE_FLAGS_TO_PASS): Add TARGET_SUBDIR.
2894 * configure.in (target_subdir): Set to ${target_alias} instead
2899 * Makefile.in (BASE_FLAGS_TO_PASS): Add gcc_version_trigger.
2900 (Makefile): Depend on $(gcc_version_trigger).
2902 * configure (gcc_version): Change default initializer to empty
2904 (gcc_version_trigger): New variable; pass this variable down
2905 to subdir configures to enable them checking gcc's version
2906 themselves. Emit make macros for both gcc_version vars.
2907 (topsrcdir): Initialize reliably.
2908 (recursion line): Remove --with-gcc-version=${gcc_version}.
2912 * configure (enable_version_specific_runtime_libs): Implement new flag
2913 --enable-version-specific-runtime-libs which installs C++ runtime stuff
2914 in $(libsubdir); emit definition in each generated Makefile.
2915 (gxx_include_dir): Initialize depending on
2916 $enable_version_specific_runtime_libs.
2920 * configure (gcc_version): Initialize properly depending on
2921 how and where configure is started.
2922 (recursion line): Pass a --with-gcc-version=${gcc_version}
2923 to configures in subdirs.
2927 * configure.in (noconfigdirs): Add configure pattern for mips tx39
2932 * configure.in: Add cygmon and libstub support for mn10200.
2936 * configure (gcc_version): Add new variable describing the
2937 particular gcc version we're building.
2938 * Makefile.in (libsubdir): Add new macro for the directory
2939 in which the compiler finds executables, libraries, etc.
2940 (BASE_FLAGS_TO_PASS): Pass down gcc_version, target_alias
2945 * Makefile.in (local-clean): Remove *.log.
2946 (warning.log): Built with warn_summary from build.log.
2947 (mail-report.log): Run test_summary.
2948 (mail-report-with-warnings.log): Run test_summary including
2949 warning.log in the report.
2953 * config.guess: Detection of Pentium II for *-sco-3.2v5*.
2957 * Makefile.in (grep): Grep no longer depends on libiberty.
2961 * Makefile.in: all-snavigator needs all-libgui.
2965 * configure.in: Add cygmon and libstub support for mn10300.
2969 * missing: Update to version from automake 1.3.
2971 * ltmain.sh: On installation, don't get confused if the same name
2972 appears more than once in the list of library names.
2976 * config.sub: Accept m68060 and m5200 as CPU names.
2980 * configure: Use && rather than using -a in test, because odd
2981 strings can confuse test.
2982 * configure.in: Likewise.
2986 * ltconfig, ltmain.sh: Bring in Visual C++ support.
2990 * Makefile.in (boostrap2-lean, bootstrap3-lean,
2991 bootstrap4-lean): New targets.
2995 * mpw-* Delete. Not used.
2999 * COPYING.LIB: Update FSF address.
3003 * ltconfig, ltmain.sh: Update to libtool 1.2a.
3005 * Makefile.in (GASB_SUPPORT_DIRS): Remove intl; already included via
3010 * ltconfig, ltmain.sh: Avoid producing a version number if
3011 -version-info was not used.
3015 * configure.in: Add --with-newlib to CONFIG_ARGUMENTS if we are
3016 building with newlib.
3020 * Makefile.in (EXTRA_GCC_FLAGS): Remove backslash at end;
3021 Solaris `make' causes it to continue to next definition.
3025 * Makefile.in (install-gdbtk): Call this 'install-gdb' so that
3026 the right GUI libraries and files are installed along with GDB.
3030 * configure.in: Change alpha to alpha* in several places.
3034 * config.sub: Recognize sparc86x.
3038 * configure.in (--enable-target-optspace): Remove debug echo.
3042 * configure: Set CXXFLAGS from CXXFLAGS, not CFLAGS.
3046 * ltconfig: Update cygwin32 support.
3048 * Makefile.in (GAS_SUPPORT_DIRS): Add intl.
3049 (BINUTILS_SUPPORT_DIRS, GASB_SUPPORT_DIRS): Likewise.
3050 (GDB_SUPPORT_DIRS): Likewise.
3054 * configure.in (target_makefile_frag): If --enable-target-optspace,
3055 use -Os to compile target libraries rather than -O2. Default to
3056 using -Os for d10v and m32r if --{enable,disable}-target-optspace is
3058 * configure.in (target_cflags): Ditto for d30v.
3062 * Makefile.in (all-bfd): Depend on all-intl.
3063 (all-binutils): Likewise.
3064 (all-gas): Likewise.
3065 (all-gprof): Likewise.
3070 * configure.in (host_tools): Fix typo, lbtool -> libtool.
3074 * Makefile.in (all-bfd): Depend upon all-libiberty.
3076 * ltconfig, ltmain.sh: Bring in newer cygwin32 support.
3080 * Makefile.in: Add libstub.
3082 * configure.in: Ditto. Build libstub for targets that have cygmon
3087 * configure.in: Don't set PICFLAG on ix86-cygwin32.
3091 * configure.in: Recognise i[3456]96-*-sysv5* as a valid host, and
3092 use mh-sysv5 if specified. Support gprof on SCO Open Server.
3096 * configure: Define DEFAULT_M4 by searching PATH.
3097 * Makfile.in: Use DEFAULT_M4.
3101 * ltconfig: Add cygwin32 support.
3103 * Makefile.in, configure.in: Add libtool as a native only directory
3104 to configure and build.
3108 * Makefile.in (INSTALL_MODULES): Remove texinfo.
3112 * Makefile.in (EXTRA_GCC_FLAGS): XFOO lines shortened.
3116 * Makefile.in: add ash make rules
3117 * configure.in: add ash to native_only and host_tools lists
3121 * Makefile.in (all-gettext, all-intl): New targets.
3122 (ALL_MODULES): Added all-gettext, all-intl.
3123 (CROSS_CHECK_MODULES): Added check-gettext, check-intl.
3124 (INSTALL_MODULES): Added install-gettext, install-intl.
3125 (CLEAN_MODULES): Added clean-gettext, clean-intl.
3127 * configure.in (host_tools): Added gettext.
3128 (native_only): Likewise.
3129 (noconfigdirs) [various cases]: Likewise.
3130 (host_libs): Added intl.
3134 * configure: Do not disable building gdbtk for cygwin32 hosts.
3138 * configure.in: Add thumb-coff target.
3139 * config.sub: Add thumb-coff target.
3143 * Makefile.in: Revert yesterday's change.
3144 (all-target-winsup): all-target-librx stays out of here.
3148 * Makefile.in (TARGET_CONFIGDIRS, ALL_TARGET_MODULES,
3149 CONFIGURE_TARGET_MODULES, CHECK_TARGET_MODULES,
3150 INSTALL_TARGET_MODULES, CLEAN_TARGET_MODULES, all-target-winsup):
3151 Remove references to librx and libg++.
3155 * Makefile.in (BASE_FLAGS_TO_PASS): Pass $(lispdir) down to
3160 * Makefile.in (CC_FOR_TARGET): Use $(TARGET_SUBDIR) when passing -B
3161 for newlib directory.
3162 (CXX_FOR_TARGET): Likewise.
3166 * ltconfig: Update after libtool/ltconfig.in change for
3171 * ltconfig, ltmain.sh: Update to libtool 1.2.
3175 * Makefile.in (install-gcc): Don't specify LANGUAGES here.
3176 (install-gcc-cross): Instead, override LANGUAGES here.
3180 * Makefile.in ($(CONFIGURE_TARGET_MODULES)): Set CONFIG_SITE to a
3181 non-existent file since /dev/null loses with bash 2.0/autoconf 2.12.
3185 * configure.in: Add Thumb-pe target.
3189 * Makefile.in - changed sn targets to snavigator
3190 * configure.in - changed sn targets to snavigator
3194 * config-ml.in: After building symlink tree call make distclean
3195 if a Makefile got linked into ${ml_dir}/${ml_libdir}; this happens
3196 to be the case for libiberty.
3200 * configure: When making link, also check the current
3201 directory. The configure scripts may create one.
3205 * config.sub: Accept alphapca56 and alphaev6 properly.
3209 * configure.in: Revert 3 Jan change for powerpc-linux-gnulibc1.
3213 * config.sub (sco5): Fix typo.
3217 * Makefile.in (INSTALL_MODULES): Move install-tcl before
3219 (install-itcl): Remove dependency on install-tcl.
3223 * configure.in: Remove libgloss from noconfigdirs for MN10300.
3227 * configure.in: Don't build libgui for a cygwin32 target when not on
3232 * configure (redirect): Set to null, so default behavior of
3233 configure is now --verbose.
3237 * Makefile.in ($(CONFIGURE_TARGET_MODULES)): Run configure with
3238 CONFIG_SITE=/dev/null to forestall lossage with site configuration.
3242 * Makefile.in (BASE_FLAGS_TO_PASS, EXTRA_TARGET_FLAGS): Really add
3243 this change to sync Makefile.in with its ChangeLog entries.
3247 * ltmain.sh (mkdir): Check that the directory doesn't exist
3248 before we exit with error, so that we don't get races during
3253 * ltconfig, ltmain.sh: Update from libtool 1.0i.
3257 * Makefile.in (BASE_FLAGS_TO_PASS): Don't pass PICFLAG and
3259 (EXTRA_TARGET_FLAGS): Don't pass PICFLAG_FOR_TARGET.
3261 * configure: Emit a definition for the new macro enable_shared
3264 * config/mh-sparcpic (PICFLAG): Define to properly according
3265 to current multilib configuration.
3266 * config/mt-sparcpic (PICFLAG_FOR_TARGET): Define to properly
3267 according to current multilib configuration.
3271 * configure.in (host_tools, native_only): Add libtool.
3275 * configure.in: add target-gperf to noconfigdirs for Cygwin32.
3276 Fix typo in ming config comment.
3280 * ltconfig, ltmain.sh: Update from libtool 1.0h.
3284 * config.sub: Add tic30 cases, and map c30 to tic30.
3288 * Makefile.in (TARGET_CONFIGDIRS): Add libf2c.
3289 (ALL_TARGET_MODULES, CONFIGURE_TARGET_MODULES): Similarly
3290 (CHECK_TARGET_MODULES, INSTALL_TARGET_MODULES): Similarly
3291 (CLEAN_TARGET_MODULES): Similarly
3292 (all-target-libf2c): Add dependences.
3293 * configure.in (target_libs): Add libf2c.
3297 * configure.in: Remove expect from noconfigdirs when target
3298 is cygwin32. OK to build expect and dejagnu with Canadian
3303 * configure.in: Do build expect, dejagnu, and cvssrc for a cygwin32
3306 * config.guess: Use ${UNAME_MACHINE} rather than i386 for cygwin32
3311 * Makefile.in (BASE_FLAGS_TO_PASS): Remove passing $(local_prefix)
3312 here as it is not defined in the toplevel Makefile.
3316 * configure (package_makefile_rules_frag): New variable, which names
3317 a file with generic rules, ...
3318 Change comment to mention we now have FIVE parts.
3319 * configure: Undo last change.
3323 * config.guess: More accurate determination of HP processor types.
3324 * config.sub: More accurate determination of HP processor types.
3328 * configure (package_makefile_frag): Move inserting the
3329 ${package_makefile_frag} to where it should be according
3334 * config.guess: Add support for Linux/ARM.
3338 * .cvsignore: Remove *-info and *-install since they match
3339 release-info and mpw-install, which we don't want to just ignore.
3343 * configure.in: Revert 3 Jan change for alpha-linux-gnulibc1.
3347 * Makefile.in (FLAGS_TO_PASS): Pass down gcc_include_dir and
3348 local_prefix to sub-make invocations.
3352 * configure.in: Check makefile fragments in the source
3357 * configure.in: Check whether host and target makefile
3358 fragments exist before adding them to *_makefile_frag.
3362 * configure.in (target_configdirs): Add cygmon for sparc64-elf.
3366 * configure.in: Make sure we only replace RPATH_ENVVAR on
3367 lines which begin with RPATH_ENVVAR, i.e. add "^" to the
3370 * Makefile.in (BASE_FLAGS_TO_PASS): Pass RRPATH_ENVVAR down
3375 * config-ml.in (multi-do): LDFLAGS must include multilib
3380 * config.guess: Recognize i[3456]-i586-UnixWare7-sysv5.
3384 * config.sub: Add mingw32 support.
3385 * configure.in: Likewise.
3386 * config/mh-mingw32: New file.
3390 * configure.in: Finalize support for {alpha|powerpc}*-*-linux-gnulibc1
3394 * Makefile.in (INSTALL_TARGET): Do install-gcc first.
3395 * configure (gxx_include_dir): Provide a definition for subdirs
3396 which do not use autoconf.
3400 * config.guess: Sync with egcs. Picks up new alpha support,
3401 BeOS & some additional linux support.
3405 * config.guess: HP 9000/803 is a PA1.1 machine.
3409 * configure.in: It's alpha*-...
3413 * configure.in (host_makefile_frag, target_makefile_frag):
3414 Handle multiple config files.
3415 (alpha-*-linux*): Treat alpha-*-linux* as alpha-*-linux* and
3424 * configure.in (d30v-*-*): Allow configuring of libide, vmake, etc.
3428 * Makefile.in: Add libgui directory.
3429 (GDB_TK): Add all-libgui.
3430 * configure.in: Add libgui directory.
3431 * configure: Add all-libgui to GDB_TK.
3435 * config-ml.in (multidirs): Add m32r to multilib list.
3439 * Makefile.in (all-target-gperf): Change dependency to
3440 all-target-libstdc++.
3444 * config.guess: Add BeOS support.
3448 Source directory cvs renamed to cvssrc:
3449 * configure.in (host_tools): Change cvs to cvssrc.
3450 (native_only): Likewise.
3451 (noconfigdirs) [various cases]: Likewise.
3452 * Makefile.in (ALL_MODULES): Change all-cvs to all-cvssrc.
3453 (CROSS_CHECK_MODULES): Change check-cvs to check-cvssrc.
3454 (INSTALL_MODULES): Change install-cvs to install-cvssrc.
3455 (CLEAN_MODULES): Change clean-cvs to clean-cvssrc.
3456 (all-cvssrc): Rename target from all-cvs.
3460 * configure (gxx_include_dir): Fix thinko.
3464 * Makefile.in (INSTALL_TARGET_CROSS): Define.
3465 (install-cross, install-gcc-cross): New targets.
3469 * configure.in (noconfigdirs): Add support for Thumb target.
3471 * config.sub (maybe_os): Add support for Thumb target.
3475 * Makefile.in: Add rules for cygmon.
3477 * configure.in: Build cygmon for sparc-elf and sparclite-aout.
3481 * Makefile.in (INSTALL_TARGET): Do install-gcc first.
3482 * configure (gxx_include_dir): Provide a definition for subdirs
3483 which do not use autoconf.
3487 * Makefile.in, configure, configure.in, ChangeLog: merge with foundry's
3493 * config.guess (powerpc*-*-linux): Handle glibc2 beta release
3494 found on RedHat Linux systems.
3498 * config.guess (alpha stuff): Merge with FSF to avoid incorrect
3503 * configure.in (i[3456]86-ncr-sysv4.3*): Tweak.
3507 * ltmain.sh: If mkdir fails, check whether the directory was created
3508 anyhow by some other process.
3512 * configure.in (d30v-*-*): Configure all directories.
3516 * configure.in (d30v-*-*): Configure newlib, libiberty directories
3521 * configure.in (d30v-*-*): Configure target-libgloss on the D30V.
3525 * include/libiberty.h: Add extern "C" { so it can be used with C++
3527 * include/remote-sim.h: Add extern "C" { so it can be used with C++
3532 * configure.in (d30v-*-*): Configure GCC now.
3536 * configure.in: Remove a "second pass" of tweaking noconfigdirs,
3537 is no longer needed.
3541 * Makefile.in: check-target-libio depends on all-target-libstdc++.
3545 * Makefile.in (bootstrap-lean): Combined with `normal' bootstrap
3546 targets using "$@" to provide support for similar but not identical
3547 targets without having to duplicate code.
3551 * makefile.vms: Fix to work with DEC C.
3555 * config.sub: Add mips-tx39-elf to marketing names.
3559 * ltmain.sh: Handle symlinks in generated script.
3563 * configure: Handle autoconf style directory options: --bindir,
3564 --datadir, --includedir, --infodir, --libdir, --libexecdir,
3565 --mandir, --oldincludedir, --sbindir, --sharedstatedir,
3567 * Makefile.in (sbindir, libexecdir, sysconfdir): New variables.
3568 (sharedstatedir, localstatedir, oldincludedir): New variables.
3569 (BASE_FLAGS_TO_PASS): Pass down bindir, datadir, includedir,
3570 infodir, libdir, libexecdir, localstatedir, mandir, oldincludedir,
3571 sbindir, sharedstatedir, and sysconfdir.
3575 * Makefile.in (bootstrap-lean): New target.
3579 * configure.in (d30v): Remove tcl, tk, expect, gdb, itcl, tix, db,
3580 sn, and gnuserv from noconfigdirs.
3584 * ltmain.sh: Tweak shell pattern to avoid bug in NetBSD /bin/sh.
3588 * Makefile.in (cross): New target.
3593 * Makefile.in (bootstrap2, bootstrap3): New targets.
3594 (all-bootstrap): Remove outdated and confusing target.
3595 (bootstrap, bootstrap2, bootstrap3): Don't pass BOOT_CFLAGS down.
3599 * configure (tooldir): enable_gdbtk=YES for cygwin32, NO for
3600 windows. Consistent with gdb/configure.
3604 * config/mt-linux: Define CXXFLAGS to make sure -fvtable-thunks is
3606 * configure.in: Name Linux target fragment.
3608 * configure: Rewrite so that project Makefile fragment is inserted
3609 first and appears last in the resulting Makefile.
3613 * Makefile.in (install-itcl): Install tcl first.
3617 * config/mh-cygwin32: ok to build split texinfo files
3621 * configure.in: remove bison from noconfigdirs for Cygwin32 host
3625 * Makefile.in (local-distclean): Also remove mh-frag mt-frag.
3627 * configure.in (skipdirs): Add target-librx for Linux.
3628 (alpha-*-linux*): Use config/mh-elfalphapic and config/mt-elfalphapic.
3632 * Makefile.in (bootstrap): New target.
3636 * config.sub: Accept 'amigados' for backward compatability.
3640 * config.guess: Merge with FSF.
3644 * config.sub: Change 'amigados' to 'amigaos' to match current usage.
3648 * config.sub: Add "marketing-names" patch.
3652 * configure.in (*-*-rtems*): Do not build libgloss for rtems.
3656 * config.sub: Handle v850-elf.
3660 * .cvsignore (*-install): Remove.
3664 * ltconfig: Set CONFIG_SHELL in libtool.
3665 * ltmain.sh: Use CONFIG_SHELL instead of /bin/sh
3669 * configure.in (target_subdir): Set to libraries if enable_multilib.
3673 * config.guess: Update from gcc directory.
3677 * Makefile.in (all-sim): Depends on all-readline.
3681 * Makefile.in (BISON, YACC): Use $$s.
3682 (all-bison): Depend on all-texinfo.
3686 * Makefile.in (BISON): Add -L flag.
3691 * configure.in (noconfigdirs): Add support for v850e target.
3693 * config.sub (maybe_os): Add support for v850e target.
3697 * configure.in (noconfigdirs): Add support for v850ea target.
3699 * config.sub (maybe_os): Add support for v850ea target.
3703 * config.sub: Add mipstx39. Delete r3900.
3707 * Makefile.in (all-autoconf): Depends on all-texinfo.
3711 * config-ml.in ({powerpc,rs6000}*-*-*): Update to current AIX and
3716 * configure: Get CFLAGS and CXXFLAGS from Makefile, if possible.
3718 * configure: When handling a Canadian Cross, handle YACC as well as
3719 BISON. Just set BISON to bison. When setting YACC, prefer bison.
3720 * Makefile.in (all-bison): Depend upon all-texinfo.
3724 * Makefile.in (BISON): bison, not byacc or bison -y.
3725 (YACC): bison -y or byacc or yacc.
3726 (various): Add *-bison as appropriate.
3727 (taz): No need to mess with BISON anymore.
3731 * configure: If OSTYPE matches *win32*, try to find a good value for
3736 * Makefile.in (taz): Get the version number from AM_INIT_AUTOMAKE in
3737 configure.in if it is present.
3741 * Makefile.in (LD_FOR_TARGET): Change ld.new to ld-new.
3745 * config.sub: Recognize `arc' cpu.
3746 * configure.in: Likewise.
3747 * config-ml.in: Likewise.
3751 * Makefile.in ($(INSTALL_X11_MODULES)): Depend upon installdirs.
3755 * configure: Changed sed delimiter from ':' to '|' when
3756 attempting to substitute ${config_shell} for SHELL. On
3757 NT ${config_shell} may contain a ':' in it.
3761 * Makefile.in (EXTRA_GCC_FLAGS): Fix for non-bash shells.
3765 * Makefile.in (AS_FOR_TARGET): Change as.new to as-new.
3769 * Makefile.in (NM_FOR_TARGET): Change nm.new to nm-new.
3771 * ylwrap: If the program is a relative path, force it to be
3776 * configure (tooldir): Set BISON to `bison -y' and not just bison.
3780 * Makefile.in (CC_FOR_TARGET): When winsup/Makefile present,
3781 correctly specify the target build directory $(TARGET_SUBDIR)/winsup
3786 * Makefile.in (EXTRA_GCC_FLAGS): Fix handling of macros with values
3787 separated by spaces.
3792 * Makefile.in (DEVO_SUPPORT): Add ylwrap.
3794 * ltmain.sh: Handle /bin/sh at start of install program.
3796 * Makefile.in (DEVO_SUPPORT): Add ltconfig, ltmain.sh, and missing.
3798 * ltconfig, ltmain.sh: New files, from libtool 1.0.
3799 * missing: New file, from automake 1.2.
3803 * Makefile.in: Treat tix like tk, putting it in X11_MODULES. Add
3804 check-tk to CHECK_X11_MODULES.
3808 * config.sub: Merge with FSF.
3812 * config.guess: Merge with FSF.
3816 * configure: Treat msdosdjgpp like go32.
3817 * configure.in: Likewise. Don't remove gprof for go32.
3819 * configure: Change Makefile.tem2 to Makefile.tm2.
3823 * configure.in (noconfigdirs): For alpha-dec-osf*, don't ignore grep.
3827 * install-sh (chmodcmd): Set to null if the DST directory already
3828 exists. Same as Nov 11th change.
3832 * configure (GDB_TK): Needs itcl and tix.
3836 * config.guess: Update from FSF.
3840 * Makefile.in (GDB_TK): Depend on itcl and tix.
3844 * Makefile.in (INSTALL_PROGRAM_ARGS): New variable.
3845 (INSTALL_PROGRAM): Use $(INSTALL_PROGRAM_ARGS).
3846 (INSTALL_SCRIPT): New variable.
3847 (BASE_FLAGS_TO_PASS): Pass down INSTALL_SCRIPT.
3848 * configure.in: If host is *-*-cygwin32*, set INSTALL_PROGRAM_ARGS
3850 * install-sh: Add support for -x option.
3854 * configure.in, Makefile.in: Treat tix like itcl.
3858 * Makefile.in (WINDRES): New variable.
3859 (WINDRES_FOR_TARGET): New variable.
3860 (BASE_FLAGS_TO_PASS): Add WINDRES_FOR_TARGET.
3861 (EXTRA_HOST_FLAGS): Add WINDRES.
3862 (EXTRA_TARGET_FLAGS): Add WINDRES.
3863 (EXTRA_GCC_FLAGS): Add WINDRES.
3864 ($(DO_X)): Pass down WINDRES.
3865 ($(CONFIGURE_TARGET_MODULES)): Set WINDRES when configuring.
3866 * configure: Treat WINDRES like DLLTOOL, and WINDRES_FOR_TARGET like
3871 * configure.in: configure sim before gdb for win32-x-ppc
3875 Move gperf into the toplevel, from libg++.
3876 * configure.in (target_tools): Add target-gperf.
3877 (native_only): Add target-gperf.
3878 * Makefile.in (all-target-gperf): New target, depend on
3880 (configure-target-gperf): Empty rule.
3881 (ALL_TARGET_MODULES): Add all-target-gperf.
3882 (CONFIGURE_TARGET_MODULES): Add configure-target-gperf.
3883 (CHECK_TARGET_MODULES): Add check-target-gperf.
3884 (INSTALL_TARGET_MODULES): Add install-target-gperf.
3885 (CLEAN_TARGET_MODULES): Add clean-target-gperf.
3889 * config.sub (mn10200): Recognize new basic machine.
3893 * configure.in: Don't set ENABLE_MULTILIB, so we'll be passing
3894 --enable-multilib down to subdirs; setting TARGET_SUBDIR was enough.
3898 * configure.in: If we're building mips-sgi-irix6* native, turn on
3899 ENABLE_MULTILIB and set TARGET_SUBDIR.
3903 * Makefile.in (all-sn): Depend on all-grep.
3907 * configure.in: Use mh-ppcpic and mt-ppcpic for powerpc*-* targets.
3909 * configure: Set CFLAGS and CXXFLAGS, and substitute them into
3911 * Makefile.in: Add comment for CFLAGS and CXXFLAGS.
3913 * Makefile.in (DISTBISONFILES): Remove.
3914 (taz): Don't futz with DISTBISONFILES. Change BISON to use
3917 * configure.in: Build itl, db, sn, etc., when building for native
3920 * Makefile.in (LD): New variable.
3921 (EXTRA_HOST_FLAGS): Pass down LD.
3922 ($(DO_X)): Likewise.
3926 * Makefile.in (INSTALL): Use $(SHELL) when executing install-sh.
3930 * configure.in (targargs): Strip out any supplied --build argument
3931 before adding our own. Always add --build.
3935 * configure.in (targargs): Pass --build if we're doing
3940 * configure: Use '|' instead of ":" as the separator in
3941 sed. Otherwise sed chokes on NT path names with drive
3942 designators. Also look for "?:*" as the leading characters in an
3947 * config.sub: Support for r3900.
3951 * configure.in: Use install-sh, not install.sh.
3955 * Makefile.in (taz): Improve check for BISON so it doesn't try to
3960 * Makefile.in (INSTALL_MODULES): Put install-opcodes before
3965 * Makefile.in: Add automake targets.
3966 * configure.in (host_tools): Add automake.
3970 * configure: Default CXX to c++, not gcc.
3971 * Makefile.in (CXX): Set to c++, not gcc.
3972 (CXX_FOR_TARGET): When cross, transform c++, not gcc.
3976 * install-sh: try appending a .exe if source file doesn't
3981 * configure.in: Turn on multilib by default.
3982 (cross_only): Remove target-libiberty.
3984 * Makefile.in (all-gcc): Don't depend on libiberty.
3988 * config.guess: improve algorithm for recognizing Gnu Hurd x86.
3992 * Makefile.in (DEVO_SUPPORT): Add mpw-install.
3993 (DISTBISONFILES): Add ld/Makefile.in
3997 * configure.in: if target is cygwin32 but host isn't cygwin32,
3998 don't configure gdb tcl tk expect, not just gdb.
4002 * configure.in: Added gnuserv everywhere sn appears.
4004 * Makefile.in (ALL_MODULES): Added all-gnuserv.
4005 (CROSS_CHECK_MODULES): Added check-gnuserv.
4006 (INSTALL_MODULES): Added install-gnuserv.
4007 (CLEAN_MODULES): Added clean-gnuserv.
4008 (all-gnuserv): New target.
4012 * config.guess: Fixes for MIPS OpenBSD systems.
4016 * Makefile.in (INSTALL_XFORM): Remove.
4017 (BASE_FLAGS_TO_PASS): Remove INSTALL_XFORM.
4019 * mkinstalldirs: New file, copied from automake.
4020 * Makefile.in (installdirs): Rename from install-dirs. Use
4021 mkinstalldirs. Change all users.
4022 (DEVO_SUPPORT): Add mkinstalldirs.
4026 * install-sh: Rename from install.sh.
4027 * Makefile.in (INSTALL): Change install.sh to install-sh.
4028 (DEVO_SUPPORT): Likewise.
4030 * configure: Use ${config_shell} with ${moveifchange}. From Thomas
4035 * config.guess: Recognize OpenBSD systems correctly.
4039 * README, Makefile.in (ETC_SUPPORT): Remove references to
4040 cfg-paper*, configure.{texi,man,info*}._
4044 * Makefile.in (all.normal): Ensure that gcc is built after all
4045 the x11 - ie gdb - targets.
4049 * makefile.vms: Don't run conf-a-gas.
4053 * configure.in (hppa1.1-*-rtems*): New target, like hppa-*-*elf*.
4057 * configure.in: Remove noconfigdirs case since gdb also
4058 configures and builds for tic80-coff.
4062 * configure: Set cache_file to config.cache.
4063 * Makefile.in (local-distclean): Remove config.cache.
4067 * COPYING: Update FSF address.
4071 * configure.in (tic80-*-*): Remove G++ libraries and libgloss from
4076 * Makefile.in (install-dirs): Don't crash if prefix, and hence
4081 * config.sub: Tweak mn10300 entry.
4085 * configure.in (host_tools): Put sim before gdb, so gdb's
4086 configure.tgt can determine if the simulator was configured.
4090 * config.sub: Move BeOS $os case to be with other Cygnus
4095 * config.sub: Remove misplaced comment that broke Linux.
4099 * config.sub: Add BeOS support.
4103 * Makefile.in (CHECK_X11_MODULES): Don't run check-tk.
4107 * configure.in (noconfigdirs): Remove tcl and tk from
4108 noconfigdirs for cygwin32 builds.
4112 * configure.in (tic80-*-*): Remove ld from noconfigdirs.
4116 * Makefile.in (GAS_SUPPORT_DIRS, BINUTILS_SUPPORT_DIRS): Remove
4117 make-all.com, use makefile.vms instead.
4121 * config.sub: Accept -lnews*.
4125 * configure.in (noconfigdirs): Disable target-newlib,
4126 target-examples and target-libiberty for d30v.
4130 * configure.in (noconfigdirs): Enable ld for d30v.
4134 * configure.in (tic80-*-*): Build compiler.
4138 * configure.in (d30v-*): Remove sim directory from list of
4139 unsupported d30v directories
4143 * config.sub, configure.in: Add d30v target cpu.
4147 * makefile.vms: New file.
4148 * make-all.com: Remove.
4152 * Makefile.in (EXTRA_GCC_FLAGS): Add LIBGCC2_DEBUG_CFLAGS.
4156 * Makefile.in (all-itcl): The rule is all-itcl, not all-tcl.
4160 * Makefile.in (ALL_MODULES): Added all-db.
4161 (CROSS_CHECK_MODULES): Addec check-db.
4162 (INSTALL_MODULES): Added install-db.
4163 (CLEAN_MODULES): Added clean-db.
4167 * config.guess: Merge with latest FSF sources.
4171 * Makefile.in (ALL_MODULES): Added all-itcl.
4172 (CROSS_CHECK_MODULES): Added check-itcl.
4173 (INSTALL_MODULES): Added install-itcl.
4174 (CLEAN_MODULES): Added clean-itcl.
4178 * configure.in: build gdb for mn10200
4182 * Makefile.in (all-target-winsup): Depend on all-target-libio.
4186 * configure.in (tic80-*-*): Turn off most targets right now.
4190 * Makefile.in (MAKEINFO): Check for the existence of the Makefile,
4191 rather than the makeinfo program.
4192 (do-info): Depend upon all-texinfo.
4196 * configure.in: Remove uses of config/mh-linux.
4198 * config.sub, config.guess: Merge with latest FSF sources.
4202 * config.sub (case $basic_machine): Add tic80 entries.
4206 * config.sub, config.guess: Merge with latest FSF sources.
4210 * mpw-build.in: Build ld before gcc, use NewFolderRecursive.
4211 * mpw-config.in: Test for NewFolderRecursive.
4212 * mpw-install: Use symbolic name for startup filename.
4213 * mpw-README: Add various additional details.
4217 * configure.in (mips*-sgi-irix6*): Remove binutils from noconfigdirs.
4221 * configure.in: Do build gcc and the target libraries for
4226 * configure.in: don't avoid building gdb for mn10300 any more
4227 * Makefile.in: double-quote GCC_FOR_TARGET line in EXTRA_GCC_FLAGS
4228 instead of single-quoting it.
4232 * configure.in: Don't use --with-stabs on IRIX 6.
4236 * configure.in (m32r): Build gdb, libg++ now.
4240 * configure.in (mips*-sgi-irix6*): Remove gdb and related
4241 directories from noconfigdirs.
4245 * config.sub (basic_machine): added mips16 configuration
4249 * config.sub: Handle d10v-unknown.
4253 * config.sub: Handle v850-unknown.
4257 * Makefile.in: add findutils
4258 * configure.in: add findutils to list of host_tools
4262 * config.sub: Handle mn10200 and mn10300.
4266 * configure.in (d10v-*): Do not build librx.
4270 * configure.in (mn10300): Build everything except gdb & libgloss.
4274 * config.guess: Patch for Dansk Data Elektronik servers,
4277 For ncr, use /bin/uname rather than uname, since GNU uname does not
4280 Patch for MIPS R4000 running System V,
4283 Fix thinko for nextstep.
4288 * config.guess: Guess mips-dec-mach_bsd4.3.
4291 * config.guess (i?86-ncr-sysv*): Emit just enough of the minor
4293 * config.guess (mips-mips-riscos*): Emit just enough of the
4297 * config.guess (sparc-auspex-sunos*): Added.
4298 (f300-fujitsu-*): Added.
4301 * config.guess: Recognize a Tadpole as a sparc.
4305 * config.guess: Don't assume that NextStep version is either 2 or
4306 3. NextStep 4 (aka OpenStep 4) has come out now.
4310 * config.guess: Support Cray T90 that reports itself as "CRAY TS".
4315 * config.sub: Contributions from bug-gnu-utils to:
4316 Support plain "hppa" (no version given) architecture, reported by
4318 OpenBSD like NetBSD.
4319 LynxOs is not a hardware supplier.
4321 * config.guess: Contributions from bug-gnu-utils to add support for:
4322 OpenBSD like NetBSD.
4324 More Pyramid systems.
4325 i[n>4]86 Intel chips.
4326 M680[n>4]0 Motorola chips.
4327 Use unknown instead of lynx for hardware manufacturer.
4331 * install.sh (chmodcmd): Set to null if the DST directory already
4336 * configure.in (powerpc*-{eabi,elf,linux,rtem,sysv,solaris}*): Do
4337 not use mt-ppc target Makefile fragment any more.
4341 * configure.in (*-*-windows): Exclude everything but those dirs
4342 needed to build windows.
4346 * Makefile.in (all-target-winsup): Depend on all-target-librx.
4350 * configure.in: Exclude mmalloc from i386-windows.
4351 * config/mh-windows: Add rules for building MSVC makefiles.
4355 * Undo my previous change.
4359 * Makefile.in (EXTRA_GCC_FLAGS): Pass down GCC_FOR_TARGET
4361 (MAKEOVERRIDES): Define (revert this part of October 18 change).
4365 * Makefile.in (FLAGS_TO_PASS): Add $(HOST_FLAGS) to allow the
4366 host to add it's own flags.
4367 * config/mh-windows (HOST_FLAGS): Set srcroot, which is needed
4368 for MSVC build procedure.
4372 * configure: Handle GCC_FOR_TARGET like CC_FOR_TARGET.
4376 * Makefile.in (CC_FOR_TARGET): Check for xgcc, not Makefile.
4377 (CXX_FOR_TARGET): Likewise.
4378 (GCC_FOR_TARGET): Define.
4379 (BASE_FLAGS_TO_PASS): Remove GCC_FOR_TARGET.
4380 (EXTRA_GCC_FLAGS): Define GCC_FOR_TARGET based on whether
4381 CC_FOR_TARGET was specified on the command line.
4382 (MAKEOVERRIDES): Don't define.
4386 * configure.in (m32r): Fix spelling of libg++ libs.
4390 * config.sub (-apple*): Remove, now redundant.
4394 * configure: Don't get confused by CPU-VENDOR-linux-gnu.
4396 * configure: Rework yesterday's sed script patch.
4398 * config.sub: Merge with FSF.
4402 * config.guess: Merge from FSF.
4405 * config.guess: Use pc instead of unknown, for pc clone systems.
4406 Change linux to linux-gnu.
4409 * config.guess: Avoid non-portable tr syntax.
4413 * test-build.mk (HOLES): Add "xargs" for gdb.
4415 * configure: Avoid hpux10.20 sed bug.
4419 * configure.in config/mh-windows: Add support for windows host
4420 (that is a build done under the Microsoft build environment).
4424 * Makefile.in: Replace all uses of srcroot with s, to shrink
4425 command line lengths.
4428 * configure.in: If configuring for newlib, pass --with-newlib to
4430 * Makefile.in (CC_FOR_TARGET): If winsup/Makefile exists, pass a
4431 -Bnewlib/ and -Lwinsup to gcc.
4432 (CXX_FOR_TARGET): Likewise.
4436 * Makefile.in (ETC_SUPPORT): Add configure.
4440 * configure.in: Use config/mh-dgux386 for i[345]86-dg-dgux
4441 host configuration file.
4445 * configure.in: Break mn10x00 support into separate
4446 mn10200 and mn10300 configurations.
4447 * config.sub: Likewise.
4451 * configure.in: Add lots of stuff to noconfigdirs for
4452 the mn10x00 targets.
4454 * config.sub, configure.in: Add mn10x00 support.
4458 * make-all.com: Call conf-a-gas, not config-a-gas.
4462 * configure.in (noconfigdirs): Don't build libgloss for arm-coff
4467 * mpw-README: Add much more detail for native PowerMac.
4468 * mpw-install: New file.
4469 * mpw-configure: Add --norecursion and --help options.
4470 * mpw-config.in: Translate readme and install files when
4472 * mpw-build.in: Don't always depend on byacc and flex.
4473 (install-only-top): New action.
4477 * configure.in: You can now configure GDB for the v850.
4481 * configure.in (noconfigdirs): Don't configure any C++ dirs
4486 * config.sub: Recognize mips64vr5000.
4490 * configure.in: Use a single line for host_tools and native_only.
4494 * Makefile.in (install-itcl): Install tcl first.
4498 * config/mh-cygwin32: ok to build split texinfo files
4502 * configure.in: remove bison from noconfigdirs for Cygwin32 host
4506 * config.sub, configure.in: Add entries for m32r.
4510 * config.guess: Merge with FSF.
4514 * Makefile.in (inet-install): Don't run install-gzip.
4518 * configure.in: Don't config lots of things for *-*-windows*.
4522 * mpw-config.in: Test for mpw-true, true, and null-command scripts.
4523 (host_libs, host_tools): Copy from configure.in.
4524 * mpw-configure: Don't complain about directories not found.
4528 * configure.in (i[345]86): Recognize i686 for pentium pro.
4529 (i[3456]86-*-dgux*): Use config/mh-sysv for the host configuration
4532 * config.guess (i[345]86): Ditto.
4536 * configure.in (noconfigdirs): Removed gdb for D10V.
4540 * configure.in: Remove ld, target-libio, target-libg++, and
4541 target-libstdc++ from noconfigdirs.
4545 * configure: Fix three locations where shell scripts were
4546 being run directly rather than with config_shell.
4550 * configure.in (v850-*-*): Set up initial $noconfigdirs.
4551 * config.sub (basic_machine): Recognize v850.
4555 * mpw-configure: Handle multiple enable/disable options and
4556 pass them down recursively, handle -c and -s flags appropriately
4557 depending on choice of compiler, add escape mechanism for
4558 quoted arguments to gC.
4562 * configure.in (powerpc*-*-*): For eabi, system V.4, Linux, and
4563 solaris targets, use config/mt-ppc to set C{,XX}FLAGS_FOR_TARGETS
4564 so that -mrelocatable-lib and -mno-eabi are used.
4566 * Makefile.in (CONFIGURE_TARGET_MODULES): If target compiler does
4567 not support --print-multi-lib, don't abort.
4571 * config/mh-cygwin32 (CFLAGS): Define _WIN32 to be compatible
4572 with normal Windows compilation environment.
4576 * make-all.com: Run config-a-gas.
4577 * setup.com: Don't copy subdirectory files around.
4581 * configure.in (*-*-ose): Remove exclusion of libgloss for this
4582 target, it now compiles correctly.
4586 * mpw-config.in: Generate Mac include for elf/dwarf2.h.
4590 * configure.in (d10v-*-*): Remove ld from $noconfigdirs.
4594 * configure.in (native_only): Add prms.
4598 * Makefile.in (GAS_SUPPORT_DIRS): Add make-all.com and setup.com.
4599 (BINUTILS_SUPPORT_DIRS): Likewise.
4603 * configure.in (d10v-*-*): Don't configure ld or gdb until the
4604 d10v support is added.
4608 * configure.in (d10v-*-*): New target.
4612 * config.guess (HP 9000/811): Recognize this as a PA1.1
4617 * Makefile.in (do-tar-gz): New target, split out from tail end of
4618 taz target. Run each command separately, don't use pipes.
4623 * mpw-configure: Look for g-mpw-make.sed in config/mpw.
4624 * mpw-build.in: No builds should depend on building byacc or flex,
4625 they are assumed to be installed already.
4629 * Makefile.in (CONFIGURE_TARGET_MODULES): Set r environment
4630 variable that CC_FOR_TARGET needs.
4634 * Makefile.in (CONFIGURE_TARGET_MODULES): Determine if the multlib
4635 options have changed since the last time the subdirectory was
4636 configured, and if it has, reconfigure.
4637 (CLEAN_TARGET_MODULES): Delete multilib.out and tmpmulti.out, which
4638 CONFIGURE_TARGET_MODULES uses to remember the old multilib options.
4642 * Makefile.in (ALL_MODULES,CROSS_CHECK_MODULES,INSTALL_MODULES,
4643 CLEAN_MODULES): Add bash.
4644 (all-bash): New target.
4648 * configure.in (mips-sgi-irix6*): Use mh-irix6 instead of mh-irix5.
4652 * config.sub (basic_machine): Recognize d10v as a valid processor.
4656 * mpw-configure: Add support for --bindir.
4657 * mpw-build.in: Use a GCC-specific build script for GCC actions.
4661 * configure.in: add bash, time, gawk to list of hosttools and things
4662 to only build for native toolchains
4666 * Makefile.in (docdir): Remove.
4670 * Makefile.in (datadir): Set to $(prefix)/share.
4674 * configure.in: build diff and patch for cygwin32-hosted
4679 * config.sub: Accept -rtems*.
4683 * configure.in: enable dosrel for cygwin32-hosted builds,
4684 remove diff from the list of things not buildable
4689 * Makefile.in (TARGET_SUBDIR): Move comment to previous line so we
4694 * configure.in (mips*-sgi-irix6*): Set noconfigdirs appropriately.
4698 * Makefile.in (taz): Handle case where tex3patch didn't even get
4699 checked out. Also, if it was found, put the symlink in a new util
4704 * config.guess (*:Linux:*:*): Add support for PowerPC Linux.
4708 * config.sub: Recognize -openvms.
4709 * configure.in (alpha*-*-*vms*): Set noconfigdirs.
4710 * make-all.com, setup.com: New files.
4714 * Makefile.in (taz): tex3patch moved to texinfo/util.
4718 * configure: enable_gdbtk=no for cygwin32-hosted toolchains
4719 * configure.in: remove make from disable-if-Can-Cross list
4720 enable gdb if ${host} and ${target} are cygwin32
4724 * config.guess (i?86-ncr-sysv*): Emit minor release numbers.
4725 Recognize the NCR 4850 machine and NCR Pentium-based platforms.
4729 * config.guess: Combine mips-mips-riscos cases, and use cpp to
4730 distinguish sysv/svr4/bsd variants.
4735 * configure.in: Added copyright notice.
4736 * move-if-change: Added copyright notice.
4740 * configure.in (powerpcle-*-solaris*): Until we get shared
4741 libraries working, don't build gdb, sim, make, tcl, tk, or
4746 * config.guess: Merge with FSF:
4749 * config.guess (*:Linux:*:*): Add guess for sparc-unknown-linux.
4752 * config.guess (AViiON:dgux:*:*): Fix typo in recognizing mc88110.
4755 * config.guess: Combine two OSF1 rules.
4757 * config.guess (dgux): Use /usr/bin/uname rather than uname,
4762 * Makefile.in (MAKEDIRS): Removed $(tooldir).
4766 * mpw-README: Document GCCIncludes.
4770 * configure.in (alpha-*-linux*): Set enable_shared to yes.
4774 * mpw-configure: Handle --enable-FOO and --disable-FOO.
4778 * configure.in (*-*-cygwin32): Configure make.
4782 * Makefile.in (inet-install): Quote value of INSTALL_MODULES.
4786 * Makefile.in (all-inet): Depend on all-perl.
4788 * Makefile.in (inet-install): New target.
4790 * Makefile.in (all-inet): Depend on all-tcl.
4791 (all-inet): Depend on all-send-pr.
4795 * configure.in (powerpcle-*-solaris*): Turn off tk and tcl
4800 * configure.in: Don't configure --with-gnu-ld on AIX.
4804 * configure.in (powerpcle-*-solaris*): Turn off gdb temporarily.
4808 * Makefile.in (ALL_MODULES): Added all-inet.
4809 (CROSS_CHECK_MODULES): Added check-inet.
4810 (INSTALL_MODULES): Added install-inet.
4811 (CLEAN_MODULES): Added clean-inet.
4812 (all-indent): New target.
4814 * configure.in (host_tools): Added inet.
4815 (native_only): Added inet.
4816 (noconfigdirs): Added inet.
4820 * configure.in: Don't configure libgloss if we are not configuring
4825 * configure.in: Don't configure libgloss for unsupported
4830 * Makefile.in (CLEAN_MODULES): Add clean-apache.
4834 * Makefile.in (ALL_MODULES): Include all-apache.
4835 (CROSS_CHECK_MODULES): Include check-apache.
4836 (INSTALL_MODULES): Include install-apache.
4837 (all-apache): New target.
4839 * configure.in: Added apache everywhere perl is seen.
4843 * Makefile.in: Add support for clean-{module} and
4844 clean-target-{module} rules.
4848 * configure.in (*-*-ose) do not build libgloss.
4852 * config.guess (prep*:SunOS:5.*:*): Turn into
4853 powerpele-unknown-solaris2.
4857 * configure.in: Permit --enable-shared to specify a list of
4862 * configure.in (host==solaris): Pass only the first word of $CC
4863 to /usr/bin/which when checking if we're using /usr/ccs/bin/cc.
4867 * Makefile.in (BASE_FLAGS_TO_PASS): pass down $(MAKE).
4871 * Makefile.in (ALL_MODULES): Include all-perl.
4872 (CROSS_CHECK_MODULES): Include check-perl.
4873 (INSTALL_MODULES): Include install-perl.
4874 (ALL_X11_MODULES): Include all-guile.
4875 (CHECK_X11_MODULES): Include check-guile.
4876 (INSTALL_X11_MODULES): Include install-guile.
4877 (all-perl): New target.
4878 (all-guile): New target.
4880 * configure.in (host_tools): Include perl and guile.
4881 (native_only): Include perl and guile.
4882 (noconfigdirs): Don't build guile and perl; no ports have been
4887 * configure (--enable-*): Handle quoted option lists such as
4888 --enable-sim-cflags='-g0 -O' better.
4892 * Makefile.in ({,inst}all-target): New rule so we can make and
4893 install all of the target directories easily.
4897 * configure.in: Add missing global flag in sed substitution when
4898 deleting `target-' from ${configdirs}.
4902 * Makefile.in (DO_X): Don't get confused if CC contains `=' in an
4905 * configure.in (mips*-nec-sysvr4*): Use a host_makefile_frag of
4908 * install.sh: Correct misspelling of transformbasename.
4910 * config.guess: Recognize mips-*-sysv*.
4914 * config.sub: Recognize mon960.
4918 * configure: Restore Canadian Cross handling of BISON and LEX,
4919 removed in Feb 20 change.
4924 Mention make install. Remove the old copyright date as well the
4925 clumsy and rather pointless copyright on the README file.
4929 * Makefile.in ($(CONFIGURE_TARGET_MODULES)): If there is a
4930 Makefile after running symlink-tree, then run `make distclean' to
4931 avoid clobbering any generated files in srcdir.
4935 * configure.in (m68k-*-netbsd*): Build everything now.
4939 * Makefile.in (taz): Fix quoting.
4943 * configure.in (sparclet-*-*): Build everything now.
4947 * configure.in (m68k-*-linux*): New host.
4951 * configure: Check for bison before byacc.
4955 * Makefile.in configure: Change the way LEX and BISON/YACC are
4956 set. configure now defines DEFAULT_LEX and DEFAULT_YACC by
4957 searching PATH. These are used as fallbacks by Makefile.in if
4958 flex/bison/byacc aren't in objdir.
4962 * Makefile.in: Make everything which depends upon all-bfd also
4963 depend upon all-opcodes, in case --with-commonbfdlib is used.
4967 * configure.in (host *-*-cygwin32): Don't build gdb if we are
4968 building NT native compilers on Unix.
4972 * configure.in: Don't get CC from the host Makefile fragment if we
4973 can find gcc in PATH, or if this is a Canadian Cross. Move the
4974 Solaris test for /usr/ucb/cc to the post target script, just after
4975 the compiler sanity test.
4979 * config.sub: Merge with FSF.
4983 * Makefile.in (RPATH_ENVVAR): New variable.
4984 (REALLY_SET_LIB_PATH): Use it.
4985 * configure.in: On HP/UX, set RPATH_ENVVAR to SHLIB_PATH.
4989 * config.sub, configure.in: Recognize sparclet cpu.
4993 * config.guess: Support m68k-cbm-sysv4.
4997 * config.guess (*:Linux:*:*): Guess m68k-unknown-linux and
4998 m68k-unknown-linuxaout from linker help string. Put quotes around
5003 * config.guess (powerpc-harris-powerunix): Add guess for port
5008 * config.guess (UNAME_VERSION): Recognize X4.x as an OSF version.
5012 * configure.in: If --enable-shared was used, set SET_LIB_PATH to
5013 $(REALLY_SET_LIB_PATH) in Makefile.
5014 * Makefile.in (SET_LIB_PATH): New variable.
5015 (REALLY_SET_LIB_PATH): New variable.
5016 ($(DO_X)): Use $(SET_LIB_PATH).
5017 (install.all, gcc-no-fixedincludes, $(ALL_MODULES)): Likewise.
5018 ($(NATIVE_CHECK_MODULES), $(CROSS_CHECK_MODULES)): Likewise.
5019 ($(INSTALL_MODULES), $(CONFIGURE_TARGET_MODULES)): Likewise.
5020 ($(ALL_TARGET_MODULES), $(CHECK_TARGET_MODULES)): Likewise.
5021 ($(INSTALL_TARGET_MODULES), $(ALL_X11_MODULES)): Likewise.
5022 ($(CHECK_X11_MODULES), $(INSTALL_X11_MODULES)): Likewise.
5023 (all-gcc, all-bootstrap, check-gcc, install-gcc): Likewise.
5024 (install-dosrel): Likewise.
5025 (all-opcodes): Depend upon all-libiberty.
5029 * config.guess (*:CYGWIN*): New
5033 * Makefile.in (all-target-winsup): All all-target-libiberty.
5037 * configure.in (noconfigdirs): Add missing # in front of comment.
5041 * configure.in: add second pass to things added to noconfigdirs
5042 so *-gm-magic can exclude libgloss properly.
5046 * mpw-configure (extralibs_name, rez_name): Set correctly
5047 for MWC68K compiler.
5049 * mpw-README: Add more info on the necessary build tools.
5053 * configure.in, config.sub: Recognize cygwin32.
5057 * config.guess, config.sub: Recognize A/UX.
5061 * config.sub: Merge with gcc/config.sub.
5065 * mpw-build.in (do-binutils): Add build of stamps.
5069 * config.sub: Add recognition for mips64vr4100*-* targets.
5073 * test-build.mk: Add checking of `hpux9' rather than just `hpux'.
5074 Add creation of gconfigargs with `--enable-shared' turned on.
5075 ($(host)-stamp-stage2-configured): Pass $(gconfigargs).
5076 ($(host)-stamp-stage3-configured): Likewise.
5077 (HOLES): Add chatr and ldd.
5078 (i386-ncr-sysv4.3*): Add use of /usr/ccs/bin in the PATH and HOLE_DIRS.
5082 * configure: Pass --nfp to recursive configures.
5086 * Makefile.in (DLLTOOL): New.
5087 (DLLTOOL_FOR_TARGET): New.
5088 (EXTRA_HOST_FLAGS): Pass down DLLTOOL.
5089 (EXTRA_TARGET_FLAGS): Ditto.
5090 (EXTRA_GCC_FLAGS): Ditto.
5091 (CONFIGURE_TARGET_MODULES): Ditto.
5093 * configure: Add DLLTOOL.
5098 * configure.in (i[345]86-*-sco3.2v5*): Use mh-sysv instead of
5099 mh-sco, since old workarounds no longer needed, and don't
5100 build ld, since libraries have weak symbols in COFF.
5104 * Makefile.in (CONFIGURE_TARGET_MODULES): Add missing ';'.
5108 * configure.in: Make sure that ${CC} can be used to compile an
5113 * Makefile.in (all-gdb): Depend on $(GDB_TK).
5114 * configure (GDB_TK): Set GDB_TK to either "all-tcl all-tk" or
5115 nothing depending on whether gdbtk is being built.
5119 * Makefile.in (newlib.tar.gz): Delete building of newlib's info files.
5123 * configure.in (noconfigdirs): Put ld or gas in this early, if the
5124 user specifically used --with-gnu-ld=no or --with-gnu-as=no.
5128 * config-ml.in: Add support for
5129 --disable-{softfloat,m68881,m68000,m68020} on m68*-*-*.
5130 Simplify setting of multidirs from --disable-foo.
5134 * Makefile.in (EXTRA_GCC_FLAGS): If any of the make variables
5135 LANGUAGES, BOOT_CFLAGS, STMP_FIXPROTO, LIMITS_H_TEST,
5136 LIBGCC1_TEST, LIBGCC2_CFLAGS, LIBGCC2_INCLUDES, and ENQUIRE are
5137 non-empty, pass them on to the GCC make.
5138 (all-bootstrap): New rule that is like all-gcc, except it executes
5139 the GCC bootstrap rule instead of the GCC all rule.
5143 * config-ml.in (ml_realsrcdir): New, to account for ${subdir}.
5147 * config.guess (AViiON:dgux:*:*): Update from FSF to add pentium
5152 * config.sub (i*86*) Change [345] to [3456]
5156 * configure.in (noconfigdirs): Add gas or ld if --with-gnu-as=no or
5161 * config-ml.in (rs6000*, powerpc*): Add switches to control which
5162 AIX multilibs get built.
5166 * configure.in (i386-win32): Don't build expect if we're not
5167 building the tcl subdir.
5171 * Makefile.in: (configure-target-examples, all-target-examples):
5172 New targets, configure and build example programs.
5176 * mpw-configure: If an mpw-config.in generated a file mk.sed,
5177 use it as input to sedit the generated MPW makefile.
5178 * mpw-README: Add a suggestion about Gestalt.h.
5182 * config.sub: Accept *-*-ieee*.
5186 * Makefile.in (local-distclean): Remove $(TARGET_SUBDIR). From
5191 * configure.in (host==powerpc-pe): Add many directories to noconfigdirs
5192 for powerpc-pe native.
5193 (target==i386-win32): add tcl, make to noconfigdirs if canadian cross.
5194 (target==powerpc-pe): duplicate i386-win32 entry.
5198 * configure.in (noconfigdirs): Exclude target-newlib for all versions
5199 of vxworks, not just vxworks5.1.
5203 * mpw-configure: Add support for exec-prefix.
5207 * config.guess: Recognize HP model 816 machines as having
5212 * configure: Ignore new autoconf configure options.
5216 * config/mt-v810 (CC_FOR_TARGET): Add -ansi flag. NEC compiler
5217 defaults to K&R mode, but doesn't have varargs.h, so we have to
5218 compile in ANSI mode.
5222 * config.guess: Recognize Pentium under SCO.
5227 * configure.in (noconfigdirs): Disable target-libio on v810-*-*.
5228 * config/mt-v810 (CC_FOR_TARGET, AS_FOR_TARGET, AR_FOR_TARGET,
5229 RANLIB_FOR_TARGET): Set as appropriate for NEC v810 toolchain.
5233 * configure.in: Don't configure gas for alpha-dec-osf*.
5237 * configure.in: Default to --with-stabs for some targets for which
5238 it makes sense: mips*-*-*, alpha*-*-osf*, i[345]86*-*-sysv4* and
5239 i[345]86*-*-unixware*.
5243 * config-ml.in: Get list of multidirs using gcc --print-multi-lib
5244 rather than basing it on the target. Simplify handling of options
5245 controlling which directories to configure. Remove extraneous
5246 slash in multi-clean target.
5250 * config-ml.in: Prefix more variables with ml_ so they don't collide
5255 * configure: Don't turn -v into --v.
5259 * configure.in (targargs): Fix typo.
5261 * Makefile.in (DEVO_SUPPORT): Add symlink-tree.
5265 * configure.in: Strip --host and --target options from
5266 CONFIG_ARGUMENTS, and always configure for --host only. Add
5267 --with-cross-host option when building with a cross-compiler.
5268 * configure: Canonicalize the arguments put into config.status by
5269 always using `=' for an option with an argument. Pass a presumed
5270 --host or --target explicitly.
5274 * config.sub: Merge -macos*, -magic*, -pe*, and -win32 cases
5275 into general OS recognition case.
5279 * configure.in (target_configdirs): add target-winsup only
5280 for win32 target systems.
5284 * Makefile.in (all-target-libgloss): Depend upon
5285 configure-target-newlib, since when libgloss is built it looks to
5286 see if the newlib directory exists.
5290 * Makefile.in (DEVO_SUPPORT): Use config-ml.in instead of
5295 * configure: Handle LD and LD_FOR_TARGET when configuring a
5300 * config/mh-i386win32: add LD_FOR_TARGET.
5304 * configure.in (target_libs): add target-winsup.
5305 (target==i386-win32): add patch diff flex make to $noconfigdirs.
5306 (target==ppcle-pe): remove ld from $noconfigdirs.
5310 * Makefile.in (CONFIGURE_TARGET_MODULES): Pass --with-target-subdir.
5311 Preserve relative path names in $srcdir. Build symlink tree if
5312 configuring cross target dir and srcdir=. (= no VPATH support).
5313 (configure-target-libg++): Depend on configure-target-librx.
5314 * cfg-ml-com.in, cfg-ml-pos.in: Deleted.
5315 * config-ml.in: New file.
5316 * symlink-tree: New file.
5317 * configure: Ensure srcdir="." if that's what it is.
5321 * mpw-README: Clarify some phrasing, add notes about CodeWarrior
5322 includes and FLEX_SKELETON setting.
5323 * mpw-configure (--with-gnu-ld): New option, controls whether
5324 to use PPCLink or ld with PowerMac GCC.
5325 * mpw-build.in (all-grez, do-grez, install-grez): New targets.
5326 * mpw-config.in: Configure grez if targeting Mac.
5328 * config.sub: Accept pmac and pmac-mpw as names for PowerMacs,
5329 accept mpw and mac-mpw as names for m68k Macs, change macos7 to
5331 * configure.in: Configure grez resource compiler if targeting Mac.
5332 * Makefile.in (all-grez, install-grez): New targets.
5336 * configure: CXX defaults to gcc, not g++. If we find
5337 gcc in the path, set CC to gcc -O2.
5341 * configure: Default ${build} correctly. Avoid picking up extra
5342 spaces when reading CC and CXX from Makefile. When doing a
5343 Canadian Cross, use plausible default values for numerous
5345 * configure.in: When doing a Canadian Cross, don't try to
5346 configure tools whose configure script can't handle it.
5350 * cfg-ml-com.in (sh-*-*): Add m2 and ml/m2 to multidirs.
5354 * configure: Remove dubious bug reporting address.
5358 * Makefile.in ($(CONFIGURE_TARGET_MODULES)): If subdir has
5359 configure script, run that instead of this directory's configure.
5360 In either case, print a message that we're configuring the sub-dir.
5364 * configure.in: Before checking for the existence of various files,
5365 use sed to filter out "target-".
5369 * Makefile.in (DO_X): Split rule to decrease command line length
5371 (Philippe De Muyter).
5375 * Makefile.in (all-patch): depend on all-libiberty.
5379 * configure.in: If the only directory in target_configdirs which
5380 actually exists is libiberty, then set target_configdirs to empty,
5381 to avoid trying to build a target libiberty in a gas or gdb
5386 * configure.in (host_makefile_frag): Use m68k-sun-sunos* instead
5387 of m68k-sun-* when selecting mh-sun3 to avoid matching NetBSD/sun3
5392 * configure.in (copy_dirs): Use sys-include instead of include
5393 for --with-headers option.
5397 * Makefile.in, configure.in: Make winsup builds work with
5402 * configure.in: Build the linker on AIX.
5406 * Makefile.in (CC_FOR_TARGET, CXX_FOR_TARGET): Add $(TARGET_SUBDIR)
5411 * Makefile.in (all-gcc): Fix typo.
5415 * Makefile.in ($(CHECK_TARGET_MODULES)): Fix typo.
5419 * configure.in: Rename libFOO to target-libFOO, and xiberty
5420 to target-xiberty, to provide more flexibility.
5421 (target_subdir): Define. Create if cross.
5422 Set TARGET_SUBDIR in Makefile to ${target_subdir}.
5423 * Makefile.in: Rename all-libFOO -> all-target-libFOO, all-xiberty
5424 -> all-target-libiberty, configure-libFOO -> configure-target-libFOO,
5425 check-libFOO -> check-target-libFOO, etc.
5426 ($(DO_X)): Iterate over TARGET_CONFIGDIRS after SUBDIRS.
5427 ($(CONFIGURE_TARGET_MODULES), $(CHECK_TARGET_MODULES),
5428 $(ALL_TARGET_MODULES), $(INSTALL_TARGET_MODULES)): Update accordingly.
5429 (configure-target-XXX): Depend on $(ALL_GCC), not all-gcc, to
5430 allow ALL_GCC="" to only configure.
5431 (DEVO_SUPPORT): Add cfg-ml-com.in and cfg-ml-pos.in.
5432 (ETC_SUPPORT, ETC_SUPPORT_PFX): Merge; update 'taz' accordingly.
5433 (LIBGXX_SUPPORT_DIRS): Remove xiberty.
5437 * Makefile.in (taz): Build "info" in etc explicitly.
5441 * configure.in: Make sure that CC is undefined (as opposed to
5442 null) if toplevel/config/mh-{host} doesn't define it. Fixes a
5443 problem with autoconf trying to configure on a host without GCC.
5447 * mpw-configure: Set host alias from choice of host compiler,
5448 only use generic MPW Makefile sed if present, edit a file
5449 named "hacked_Makefile.in" instead of "Makefile.in" if present.
5450 * mpw-README: Add problem notes about CW6 and CW7.
5454 * Makefile.in (taz): Use ";" instead of ";;".
5458 * Makefile.in (taz): Grep for '^diststuff:' or '^info:' in
5459 sub-directory Makefiles, instead of using DISTSTUFFDIRS and
5461 (DISTSTUFFDIRS, DISTDOCDIRS): Removed - no longer used.
5462 (newlib.tar.gz): Don't pass DISTDOCDIRS to recursive make.
5466 * Makefile.in (DISTDOCDIRS): Remove ld gprof bnutils gas libg++ gdb
5467 and gnats, because they are now subsumed by DISTSTUFFDIRS.
5468 Move bfd to DISTSTUFFDIRS.
5472 * Makefile.in (X11_LIB): Removed.
5473 (X11_FLAGS_TO_PASS): pass only X11_EXTRA_CFLAGS and X11_EXTRA_LIBS.
5475 * configure.in (host_makefile_frag): mh-aix & mh-sun removed.
5479 * cfg-ml-com.in (powerpc*): Shorten some of the multilib directory
5484 * cfg-ml-com.in (powerpc*-eabi*): Add mcall-aixdesc varients.
5488 * configure.in (i[345]86-*-win32): Always build newlib.
5489 Don't configure cvs, autoconf or texinfo.
5490 * Makefile.in (LD_FOR_TARGET): New.
5491 (BASE_FLAGS_TO_PASS, EXTRA_TARGET_FLAGS, CONFIGURE_TARGET_MODULES):
5492 Pass down LD_FOR_TARGET.
5496 * winsup: New directory.
5497 * Makefile.in: Build winsup.
5498 * configure.in: Winsup is configured when target is win32.
5499 Can only build win32 target GDB when native.
5503 * config.guess: Recognize HP model 819 machines as having
5508 * configure: Fix sed loop which substitutes for CC and CXX to
5509 avoid bug found in various sed implementations.
5513 * cfg-ml-com.in (powerpc-*-eabisim): Delete separate rule for
5514 simulator. Use standard powerpc-*-eabi*.
5518 * configure.in: Stop putting gas and binutils in noconfigdirs for
5519 powerpc-*-aix* and rs6000-*-*.
5523 * cfg-ml-com.in (powerpc*-*-eabisim*): Add support for building
5524 -mcall-aixdesc libraries.
5530 * config.sub (arm | armel | armeb): Fix shell syntax.
5534 * cfg-ml-com.in ({powerpc,rs6000}-ibm-aix*): Add multilibs for
5535 -msoft-float and -mcpu=common support.
5536 (powerpc*-*-eabisim*): Add support for building -mcall-aix
5541 * configure.in: Allow configuration and build of emacs19 for the alpha.
5545 * configure.in (CC): Get ^CC, not just any old CC, from
5546 ${host_makefile_frag}.
5550 * configure.in (CC): Try to get CC from
5551 ${srcdir}/${host_makefile_frag}, not ${host_makefile_frag}.
5555 * Makefile.in (TARGET_CONFIGDIRS): configure targetdirs
5556 only if it exists in $(srcdir).
5560 * configure: If CC and CXX are not set in the environment, set
5561 them, based on either an existing Makefile or on searching for gcc
5562 in PATH. Substitute for CC and CXX in Makefile.
5563 * configure.in: Remove libm from target_libs. Separate
5564 target_configdirs from configdirs. If CC is not set in
5565 environment, try to get it from a host Makefile fragment. Rewrite
5566 changes of configdirs to use skipdirs instead. A few minor
5567 tweaks. Take directories out of target_configdirs as they are
5568 taken out of configdirs. Remove existing Makefile files from
5569 subdirectories. Substitute for TARGET_CONFIGDIRS and
5570 CONFIG_ARGUMENTS in Makefile.
5571 * Makefile.in (TARGET_CONFIGDIRS): New variable, automatically set
5573 (CONFIG_ARGUMENTS): Likewise.
5574 (CONFIGURE_TARGET_MODULES): New variable.
5575 ($(DO_X)): Loop over TARGET_CONFIGDIRS as well as SUBDIRS.
5576 ($(CONFIGURE_TARGET_MODULES)): New target.
5577 (configure-libg++, configure-libio): New targets.
5578 (all-libg++): Depend upon configure-libg++.
5579 (all-libio): Depend upon configure-libio.
5580 (configure-libgloss, all-libgloss): New targets.
5581 (configure-libstdc++): New target.
5582 (all-libstdc++): Depend upon configure-libstdc++.
5583 (configure-librx, all-librx): New targets.
5584 (configure-newlib): New target.
5585 (all-newlib): Depend upon configure-newlib
5586 (configure-xiberty): New target.
5587 (all-xiberty): Depend upon configure-xiberty.
5591 * configure.in (host i[345]86-*-win32): Expand the
5596 * mpw-configure: Fix sed command file name.
5600 * configure.in (host i[345]86-*-win32): Reduce the
5605 * configure.in: Don't configure ld and gdb for powerpc*-*-winnt*
5606 or powerpc*-*-pe*, since they are not yet supported.
5610 Add PowerMac support and many other enhancements.
5611 * mpw-configure: New option --cc to select compiler to use,
5612 paste options set according to --cc into the generated
5613 Makefile, generate the Makefile by sed'ing the Unix Makefile.in
5614 if mpw-make.sed is present.
5615 * mpw-config.in: Don't test for gC1, test for mpw-touch,
5616 add forward includes for PowerPC include files.
5617 * mpw-build.in: Build using Makefile.PPC if present.
5618 (do-byacc, etc): Remove separate version resource builds.
5619 (do-gas): Build "stamps" before "all".
5620 (do-gcc): Build "stamps-h" and "stamps-c" before "all".
5621 * mpw-README: Update to reflect --cc option, PowerMac support,
5622 and recently-reported compatibility problems.
5626 * cfg-ml-com.in (m68*-*-*): Only build multilibs for
5627 embedded m68k systems (-aout, -coff, -elf, -vxworks).
5628 (--with-multilib-top): Pass to recursive invocations.
5632 * configure.in (noconfigdirs): Disable libg++ and libstdc++ on
5637 * configure.in (noconfigdirs): Disable bfd, binutils, gas, gcc,
5638 gdb, ld and opcodes on v810-*-*.
5642 * config/mh-ncrsvr43: Removed AR_FLAGS
5646 * Makefile.in (DO_X): Change do-realclean to do-maintainer-clean.
5647 (local-maintainer-clean): New target.
5648 (maintainer-clean): New target.
5649 (realclean): Just depend upon maintainer-clean.
5653 * configure.in (noconfigdirs): Disable gdb on m68k-*-netbsd*.
5657 * configure.in: Build ld in mips*-*-bsd* case.
5661 * config.sub: Accept -lites* OS. From Ian Dall.
5665 * config.sub: recognise mips64vr4300 and mips64vr4300el as valid
5670 * configure.in: treat i386-win32 canadian cross the same as
5671 i386-go32 canadian cross.
5675 * cfg-ml-com.in (powerpc*-*-eabisim): Add support for PowerPC
5676 running under the simulator to build a reduced set of libraries.
5677 (powerpc-*-eabiaix): Add fine grained multilib support added to
5678 other powerpc targets yesterday.
5682 * cfg-ml-com.in (powerpc*): Add support for -disable-biendian,
5683 -disable-softfloat, -disable-relocatable, -disable-aix, and
5684 -disable-sysv to control which multilib libraries get built.
5688 * configure: Add Makefile.tem to list of files to remove in trap
5693 * config.guess (*Linux*): Add missing "exit"s.
5694 Also, need specific check for alpha-unknown-linux (uses COFF).
5698 * config.guess: Merge with FSF:
5701 * config.guess (AIX4): More robust release numbering discovery.
5704 * config.guess (i386-sequent-ptx): Properly get version number.
5707 * config.guess (mips:*:4*:UMIPS): New case.
5711 * configure.in (i386-go32 host): Fix typo (deja-gnu -> dejagnu).
5712 (i386-win32 host): Likewise. Don't build readline.
5716 * Makefile.in (GDBTK_SUPPORT_DIRS): Define and pass as part of
5717 SUPPORT_FILES to submakes.
5721 * Makefile.in (GDB_SUPPORT_DIRS): Add utils.
5722 (DEVO_SUPPORT): Add mpw-README, mpw-build.in, mpw-config.h and
5727 * configure.in (appdirs): Use =, not ==, in test expression when
5728 trying to build the text to print in the warning message for
5733 * cfg-ml-com.in (z8k-*-coff): Add 'std' multilib build.
5737 * config.guess: Recognize lynx-2.3.
5741 * config.sub (z8ksim): Deleted
5742 (z8k-*-coff): New, this is the one true name of the target.
5746 * cfg-ml-pos.in (dotdot): Work around SunOS sed bug.
5750 * config.guess (*:Linux:*:*): First try asking the linker what the
5751 default object file format is (elf, aout, or coff). Then if this
5752 fails, try previous methods.
5756 * configure.in: Don't build newlib for *-*-vxworks5.1.
5760 * configure.in: Don't build newlib for a29k-*-vxworks5.1.
5761 * test-build.mk: Add setting of --with-headers for a29k-vxworks5.1.
5765 * cfg-ml-pos.in (MULTITOP): Trim excess trailing "/.".
5769 * cfg-ml-com.in: New file.
5770 * cfg-ml-pos.in: New file.
5774 * COPYING.NEWLIB: Add HP free copyright to list.
5778 * config.sub: Recognize -eabi* for the system, not just -eabi.
5782 * Makfile.in (DLLTOOL_FOR_TARGET): New name, pass it down.
5783 * config.sub, configure.in (win32): New target and host.
5787 * configure.in: Add i386-pe configuration.
5791 * mpw-build.in (install): Install GDB after LD.
5795 * mpw-config.in (elf/mips.h): Always forward-include, needed
5800 * testsuite: New directory for customer acceptance and whole tool
5805 * configure: If per-host line isn't found, but AC_OUTPUT is found
5806 and a configure script exists, run it instead.
5810 * config.guess: Update from FSF, for alpha-dec-winnt3.5 and Crays.
5814 * configure: Set build_{cpu,vendor,os,alias} to host values when
5815 --build isn't specified.
5819 * Makefile.in (PICFLAG, PICFLAG_FOR_TARGET): New macros.
5820 (FLAGS_TO_PASS): Pass them.
5821 (EXTRA_TARGET_FLAGS): Ditto.
5823 * config/m?-*pic: Define PICFLAG* instead of LIB*FLAGS*.
5827 * Makefile.in (all-libg++): Depend on all-libstdc++.
5831 * configure.in (noconfigdirs): Enable all packages for
5832 i386-unknown-netbsd.
5836 * configure.in (noconfigdirs): Don't configure tk for i386-go32
5837 hosted builds (DOS builds)
5841 Changes for ARM based on patches from Richard Earnshaw:
5842 * config.sub: Handle armeb and armel.
5843 * configure.in: Omit arm linker only for riscix.
5847 * config.guess: Update from FSF.
5851 * config.sub: Recognize powerpcle as the little endian varient of
5852 the PowerPC. Recgonize ppc as a PowerPC variant, and ppcle as a
5853 powerpcle variant. Convert pentium into i586, not i486. Add p5
5854 alias for i586. Map new x86 variants p6, k5, nexgen into i586
5859 * configure.in (hppa*-*-lites*): Treat like hppa*-*-*elf*.
5863 * config.sub: Accept -lites* as a basic system type.
5867 * config.guess (*:Linux:*:*): Check for whether the pre-BFD linker is
5868 installed, and if so return linuxoldld as the system name.
5872 * config.guess: Add hppa1.1-hp-lites support.
5876 * configure.in: Don't build newlib for m68k-vxworks5.1.
5880 * configure.in (mips-sgi-irix6): Use mh-irix5.
5884 * Makefile.in (all-gcc): Depend on all-ld (for libgcc1-test).
5888 * test-build.mk: Enable building of shared libraries on IRIX 5 and
5889 OSF/1. Fix compiler flags.
5890 * build-all.mk: Support Linux and OSF/1 3.0. Fix compiler flags.
5894 * configure.in: Recognize --with-newlib.
5895 (sparc-*-sunos4*): Build sim, dejagnu, expect, tcl if cross target.
5899 * Makefile.in: move {all,check,install}-gdb from *_MODULES
5900 to *_X11_MODULES due to gdbtk needing X include files et al.
5904 Merge in support for Mac MPW as a host.
5905 (Old change descriptions retained for informational value.)
5907 * mpw-config.in: Add generic include forwards for cpu-specific
5908 include files in aout and elf directories.
5910 * mpw-configure: Added copyright.
5911 * mpw-config.in: Check for presence of required build tools.
5912 (target_libs): Add newlib.
5913 (target_tools): Add examples.
5914 (Read Me): Generate as "Read Me for MPW" instead.
5915 * mpw-build.in: Base sub-builds on all-foo instead of do-foo.
5916 (all-byacc, do-byacc, all-flex, do-flex, do-newlib): New actions.
5917 (do-gas, do-gcc, do-gdb, do-ld): Build Version.r first.
5919 * mpw-configure: Remove subdir-specific makefile hackery,
5920 delete mk.tmp after using it.
5922 * mpw-build.in (all): Display start and end times.
5924 * mpw-configure (host_canonical): Set.
5925 (target_cpu): Always add to makefiles.
5926 (ARCHDEFS, EMUL): Add to makefile only if nonempty.
5927 (TM_FILE, XM_FILE, NM_FILE): No longer add to makefile.
5928 (mpw-mh-mpw): Look for in srcdir and srcroot.
5929 Use sed instead of mpw-edit-prefix to edit prefix definitions.
5931 * mpw-build.in: (install-only): New target.
5933 * mpw-configure (host_alias, target_alias): Rename from hostalias
5934 and targetalias, add into generated Makefile.
5935 (mk.tmp): If present, add into generated Makefile.
5936 * mpw-build.in (all-gas): Build config.h first before gas proper.
5938 * mpw-configure (config.status): Write only if changed.
5939 * mpw-config.in (readline): Configure it (not built, just used for
5942 * mpw-config.in (elf/mips.h): Add a forward include.
5944 * mpw-config.in: Forward-include most .h files in include into
5946 (readline): Don't build.
5947 mpw-build.in (install): Install GDB.
5949 * mpw-configure (prefix, mpw_prefix): Handle it.
5950 * mpw-config.in (mmalloc, readline): Don't configure.
5951 * mpw-build.in (thisscript): Rename to ThisScript.
5952 Use mpw-build instead of BuildProgram everywhere.
5953 (mmalloc, readline): Don't build.
5954 * mpw-README: New file, basic documentation about the MPW port.
5956 * mpw-config.in: Use forward-include to create include files.
5958 * mpw-configure: Add more things to the top of each configured
5959 Makefile, including contents of config/mpw-mh-mpw.
5960 * mpw-config.in (extra-include): Create this directory and fill it
5961 with Posix-like include files when configuring.
5963 * config.sub (apple, mac, mpw): Add various aliases.
5965 * mpw-build.in: New file, top-level build script fragment for MPW.
5966 * mpw-configure: New file, configure script for MPW.
5967 * mpw-config.in: New file, config fragment for MPW.
5971 * configure.in (host_libs): Remove glob, since it is gone from the
5976 * Makefile.in: define empty GDB_NLM_DEPS var.
5978 * configure.in(target_makefile_frag): use config/mt-netware
5979 for netware targets.
5983 * config.sub: Merge in recent FSF changes. Remove linux special
5988 build-all.mk,config/mh-solaris: revert these two changes:
5992 * build-all.mk: Use CC=cc -Xs on Solaris.
5994 Mon Mar 29 19:59:26 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5996 * config/mh-solaris: SunPRO C needs -Xs to be able to get a
5997 working xmakefile for Emacs.
6001 * glob/*: Removed. Schauer's 24 Feb 1994 readline change made us
6003 * Makefile.in: Nuke all references to glob subdirectory.
6007 * configure.in: Fix --enable-shared logic in per-host.
6011 * configure.in (*-hp-hpux[78]*): Use mh-hpux8.
6015 * configure.in (noconfigdirs): Don't build gas on AIX, for
6016 powerpc*-*-aix* as well as for rs6000*-*-aix*.
6020 * configure: Fix --cache-file to work if the file argument is a
6025 * configure: If the --cache-file is used, pass it down to
6026 configure in subdirectories.
6030 * config.sub: add vxworks29k configuration.
6034 * Makefile.in (taz): Do "diststuff" part quietly.
6038 * config.sub: Mini-merge with gcc/config.sub.
6042 * config.guess (IRIX): Sed - to _.
6046 * Makefile.in (source-vault, binary-vault): New targets.
6050 * config.sub: Recognize -eabi as a basic system type.
6054 * configure.in (enable_shared stuff): Fix typo.
6058 * Makefile.in (BASE_FLAGS_TO_PASS): Fix typo in passing LIBCXXFLAGS*.
6062 * Makefile.in (LIBCXXFLAGS_FOR_TARGET): Add -fno-implicit-templates.
6066 * configure.in (rs6000-*-*): Don't build gas.
6070 * Makefile.in: Use /x/x/ instead of /brokensed/brokensed/, to
6071 reduce command line length.
6072 (AS_FOR_TARGET): Check for as.new, not Makefile.
6073 (NM_FOR_TARGET): Check for nm.new, not Makefile.
6077 * config.guess: Merge from FSF.
6081 * configure: Don't use $ when handling program_suffix.
6085 * configure.in: Configure tk for hppa/hpux.
6089 * Makefile.in (LIBGXX_SUPPORT_DIRS): Add libstdc++.
6093 * Makefile.in: Move -fno-implicit-template from CXXFLAGS
6094 to LIBCXXFLAGS. Tests are better run without it.
6098 * Makefile.in (all-ispell): Depend on all-emacs19 instead of all-emacs.
6102 * configure.in (*-*-netware*): Don't configure xiberty.
6106 * configure.in: Remove tk from native_only list.
6110 * build-all.mk: Add mips-ncd-elf target to sun4 targets
6111 for special NCD build.
6115 * Makefile.in (DEVO_SUPPORT): Remove configure.bat and
6116 makeall.bat, they're only useful for binutils snapshots.
6117 (binutils.tar.gz, gas+binutils.tar.gz): Add configure.bat and
6118 makeall.bat to specified SUPPORT_FILES.
6122 * build-all.mk: Add Ericsson targets to sun4 and solaris
6123 hosts. Add BNR's sun4 target to solaris host, so their
6124 build-from-source will be tested in-house first.
6128 * Makefile.in (LIBCFLAGS): New variable.
6129 (CFLAGS_FOR_TARGET): Ditto.
6130 (LIBCFLAGS_FOR_TARGET): Ditto.
6131 (LIBCXXFLAGS): Ditto.
6132 (CXXFLAGS_FOR_TARGET): Ditto.
6133 (LIBCXXFLAGS_FOR_TARGET): Ditto.
6134 (BASE_FLAGS_TO_PASS): Pass them.
6135 (EXTRA_TARGET_FLAGS): Ditto.
6137 * configure.in, config/m[th]-*pic: Support --enable-shared.
6141 * configure.in (target_libs): Include libstdc++ again.
6142 * config.guess: Update from FSF (for FreeBSD).
6146 * Makefile.in (DEVO_SUPPORT): Include configure.bat and
6148 (DISTDOCDIRS): Add `etc'.
6149 (ETC_SUPPORT_PFX): New variable.
6150 (taz): Include anything from etc starting with a word in
6155 * config.sub: Update for recent FSF changes. Remove obsolete
6156 h8300hds entry. Add -windows* and -osx as basic os. Minor
6161 * configure.in (target_libs): Remove libstdc++ for libg++-2.6.1.
6163 * config.guess: Merge with FSF.
6164 * configure.in: Match on i?86-ncr-sysv4.3, not i?86-ncr-sysv43.
6168 * configure: Since the "trap 0" handler will override the exit
6169 status on many systems, only use it for "exit 1", and make it set
6170 a non-zero exit status; reset it before "exit 0". Also, check
6171 exit status of config.sub, and error out if it failed.
6175 * Makefile.in: (ALL_TARGET_MODULES,INSTALL_TARGET_MODULES) Build
6176 and install libgloss.
6180 * Makefile.in (all-binutils): Depend upon all-byacc.
6182 * configure.in: Don't build emacs on Irix 5.
6186 * configure.in (*-*-netware*): Add libio.
6190 * Makefile.in (ALL_TARGET_MODULES): Add libstdc++.
6191 (CHECK_TARGET_MODULES): Ditto.
6192 (INSTALL_TARGET_MODULES): Ditto.
6193 (TARGET_LIBS): Ditto.
6194 (all-libstdc++): Note dependencies.
6198 * Makefile.in (BINUTILS_SUPPORT_DIRS): Add gas.
6202 * Makefile.in (CXXFLAGS): Use -fno-implicit-templates instead of
6203 -fexternal-templates.
6205 * configure.in (target_libs): Add libstdc++.
6206 (noconfigdirs): Add libstdc++ as appropriate.
6210 * config.guess: Update from FSF.
6214 * configure: Use ${config_shell} when running ${configsub}.
6218 * config.sub: No longer recognize h8300h.
6222 * config.sub: Remove extraneous differences between config.sub and
6227 * Makefile.in (DISTSTUFFDIRS): Add gas.
6231 * COPYING.NEWLIB: New file.
6235 * config.guess (HP-UX): Patch from Harlan Stenn
6240 * config.guess (sun4*:SunOS:*:*): Change '-JL' to '_JL'.
6244 * config.sub: Merge nextstep cleanup from FSF.
6248 * configure.in (arm-*-*): Don't configure ld for this target.
6252 * configure.in (*-*-netware): don't configure libg++, libio,
6257 * configure.in (alpha-dec-osf*): Use osf*, not osf1*. Don't
6258 configure ld--it works, but it doesn't support shared libraries.
6262 * config.guess (*-unknown-freebsd*): Get rid of possible
6263 trailing "(Release)" in version string.
6268 * config.guess: Fix i486-ncr-sysv43 -> i486-ncr-sysv4.3.
6269 Fix type: *-next-neststep -> *-next-nextstep.
6271 * config.guess: Merge from FSF:
6275 * config.guess: Recognize powerpc-ibm-aix3.2.5.
6279 * config.guess: Recognize UnixWare 1.1 (UNAME_SYSTEM is SYSTEM_V
6280 instead of UNIX_SV for UnixWare 1.0).
6284 * Makefile.in (all-gdb): Add dependencies on all-gcc and all-ld
6285 to make gdb/nlm/* build after the compiler and linker.
6289 * config.guess (netbsd, freebsd, linux): Accept any machine,
6291 (m68k-atari-sysv4): Relocate to match FSF version.
6293 * config.guess: More merges from the FSF:
6295 Add a space before function call or macro invocation.
6299 * config.guess: Add trap cmd to remove dummy.c and dummy when
6304 * config.guess (dummy.c): Redirect stderr for `hostinfo' command.
6305 (dummy): Redirect stderr from compilation of dummy.c.
6309 * config.guess: Distinguish between NeXTStep 2.1 and 3.x.
6313 * configure: Accept and ignore --cache*, for compatibility with
6318 * config.guess: Merge from FSF:
6322 * config.guess (Pyramid*:OSx*:*:*): New case.
6323 (PATH): Add /.attbin at end for finding uname.
6324 (dummy.c): Handle i860-alliant-bsd. Follow whitespace conventions.
6328 * config.guess (M88*:DolphinOS:*:*): New case.
6332 * config.guess (AViiON:dgux:*:*): Use TARGET_BINARY_INTERFACE
6333 to select whether to use ELF or COFF.
6337 * config.guess: Recognize i860-stardent-sysv and i860-unknown-sysv.
6341 * config.guess: Guess the OS version for HPUX.
6345 * config.guess (UNAME_VERSION): Recognize aix3.2.4 and aix3.2.5.
6349 * configure.in: Recognize --with-headers, --with-libs, and
6351 * Makefile.in (all-xiberty): Depend upon all-ld.
6355 * configure.in: Change i[34]86 to i[345]86.
6359 * configure (version): A few more tweaks to help message.
6363 * Makefile.in: Remove (for now) librx as a host library,
6364 now that we're building it for target.
6373 * configure.in: Also configure librx.
6377 * Makefile.in: Update various rules to reflect that librx
6378 is now needed for libg++.
6382 * config.sub: Accept mips64orion and mips64orionel as a CPU name.
6386 * configure.in: Configure the examples directory.
6390 * configure: Simplify Jun 2 1994 change.
6394 * change CC to /usr/latest/bin/gcc for lynx host builds, since
6395 /bin/gcc isn't good enough to build gcc.
6399 * Makefile.in (GDB_SUPPORT_FILES): Remove
6400 (setup-dirs-gdb, gdb.tar.gz, make-gdb.tar.gz): Remove old rules.
6401 (gdb.tar.gz): Add new rule to use standard distribution building
6406 * configure.in: Warn about use of /usr/ucb/cc on Solaris. From
6415 * configure: Search current dir first in .gdbinit.
6419 * config.sub: Recognize freebsd (merged from gcc config.sub).
6423 * config.sub: Refer to NeXT's operating system as nextstep.
6425 * config.sub (case $basic_machine): Re-order the cases, to match
6426 the order in the FSF version (which is mostly alphabethical).
6427 Merge in some additions and changes from the FSF.
6431 * config.guess: Recognize m68k-atari-sysv4 and m88k-harris-csux7.
6432 * config.sub: Recognize cxux7.
6433 * configure.in: Use mh-cxux for m88k-harris-cxux*.
6437 * config.sub: Fix typo powerpc -> powerpc-*.
6441 * Makefile.in: `all-emacs19' depends on `all-byacc'.
6443 * Makefile.in: Add all-emacs19 and install-emacs19 rules (in
6444 parallel with all-emacs and install-emacs). Top-level command
6445 `make all-emacs19 CC=gcc' now behaves as `make all-emacs CC=gcc'.
6449 * test-build.mk ($(host)-stamp-stage2-installed): Remove
6450 $(relbindir)/make before doing ``make install'', and use
6451 $(GNU_MAKE) while doing it. Avoids problem on SunOS with
6452 installing over running make binary.
6453 ($(host)-stamp-stage3-installed): Likewise.
6457 * config.guess: Recognize Mach.
6461 * configure: Check ${exec_prefixoption}, not ${exec_prefix}, to
6462 see whether --exec-prefix was used.
6466 * README: Explicitly mention libg++/README. (Zoo's idea.)
6470 * Makefile.in: Add all-librx target similar to all-libproc.
6474 * config.guess: Rearrange tests for Alpha-OSF1 to properly deal
6475 with post 1.2 uname bogosity.
6479 * configure: Remove temporary files on receipt of a signal.
6483 * configure: If there is a package_makefile_frag, remove
6484 ${subdir}/Makefile.tem after copying it in.
6488 * build_all.mk: support rs6000 lynx identifies itself as
6489 rs6000-lynx-lynxos2.2.2. Also, use /usr/cygnus/progressive/bin/gcc
6490 since /bin/gcc is too feeble to compile a modern gcc.
6494 * brought devo/test-build.mk update-to-date with progressive/
6495 test-build.mk. Add lynx targets and hppa flag info.
6499 * configure.in: Use mh-ncrsvr43. Patch from
6504 * config.guess (i386-unknown-bsdi): No longer need to
6505 check #if defined(__bsdi__) && defined(__i386__).
6509 * configure: Set program_transform_nameoption correctly.
6513 * brought build-all.mk update-to-date with progressive build-all.mk,
6514 added new targets and hppa info.
6518 * configure: If config.guess result is a prefix of the user
6519 specified target, assume a native build and use the user specified
6520 target as the host alias. Remove SunOS patch suffix removal hack.
6521 * configure.in: Remove SunOS patch suffix removal hack.
6523 * Makefile.in (CROSS_CHECK_MODULES): Remove check-flex, since it's
6524 in NATIVE_CHECK_MODULES.
6528 * Makefile.in: Rename HOST_ONLY to NATIVE.
6529 * configure: Delete SunOs patch suffix from host_canonical
6530 and build_canonical variables that are prepended to Makefiles.
6531 * configure.in: Add comments for easier maintenance.
6535 * Makefile.in: Add all-libproc target similar to all-gui.
6539 * Makefile.in (CHECK_MODULES): split into
6540 HOST_ONLY_CHECK_MODULES and CROSS_CHECK_MODULES.
6544 * config.guess (i386-unknown-bsdi): New system to guess.
6548 * Makefile.in: Add all-gui target (but not yet build by "all").
6552 * config.sub: Move deletion of patch suffix from here...
6553 * configure.in: To here, at Ian's suggestion. The top-
6554 level scripts might need to know of a patch level.
6558 * config.sub: Strip off patch suffix so rtl is recognized
6559 as a sunos4.1.3 machine, even though it's been patched.
6563 * Makefile.in (INSTALL_LAST): Delete.
6564 (INSTALL_DOSREL): New.
6568 * configure.in: Use ld for i[34]86-*-sysv4* and sparc-*-solaris2*.
6569 Don't set use_gnu_ld to no for *-*-sysv4; that only controls
6570 whether we pass down --with-gnu-ld anyhow.
6574 * Makefile.in (INSTALL_LAST): Change operation so it works
6575 on more flavors of make.
6576 * configure.in (go32): Don't build libg++ or libio.
6580 * Makefile.in (Move HOST_PREFIX_1 and friends up so
6581 they can be overriden by templates.
6585 * configure.in (target==go32): Don't build gdb.
6586 * dosrel: New directory.
6590 * configure.in (host==go32): Configure dosrel too.
6591 * Makefile.in (INTALL_TARGET): Call INSTALL_LAST last.
6592 (HOST_CC, HOST_PREFIX, HOST_PREFIX_1): Undefine, they should
6593 be set by incoming names or templates.
6594 (INSTALL_LAST): New rule.
6595 * config/mh-go32: New fragment.
6599 * config.sub (sparclitefrw, sparclitefrwcompat): Don't set the os.
6603 * config/mh-lynxrs6k: Renamed from mh-lynxosrs6k, to make it
6604 unique in 8.3 naming schemes.
6605 * configure.in (appdirs): New variable. Currently empty, but will
6606 be used in gas distribution. If nonempty, lists a set of
6607 directories at least one of which must get configured, or top
6608 level configuration is considered to have failed.
6609 (rs6000-*-lynxos*): Use new file name.
6613 Eliminate XTRAFLAGS.
6614 * Makefile.in (CC_FOR_TARGET): If newlib exists, refer to the
6615 newlib include files using -idirafter, and also use -nostdinc.
6616 (CXX_FOR_TARGET): Likewise.
6617 (XTRAFLAGS): Removed.
6618 (BASE_FLAGS_TO_PASS): Remove XTRAFLAGS_FOR_TARGET.
6619 (EXTRA_HOST_FLAGS): Remove XTRAFLAGS.
6620 (EXTRA_TARGET_FLAGS, EXTRA_GCC_FLAGS): Likewise.
6621 ($(DO_X)): Don't pass down XTRAFLAGS.
6625 * configure.in (mips*-dec-bsd*): New target; do build linker.
6626 (mips*-*-bsd*): New target; don't build linker.
6630 * configure.in: support rs6000-*-lynxos* configuration.
6631 support sunos4 as a cross target.
6633 * config.sub: look for lynx*, not lynx since the OS version may
6634 legitimately be part of the name.
6638 * configure.in (i[34]86-*-sco*): Move to be with other i386
6640 (romp-*-*): New target. Skip various binary utilities.
6641 (vax-*-*): New target. Don't build newlib.
6642 (vax-*-vms): Renamed from *-*-vms. Don't build opcodes or newlib.
6646 * configure.in: Only set host_makefile_frag if config
6651 * install.sh: If $dstdir exists, don't check whether each
6656 * test-build.mk (HOLES): Add sleep; used by rcs/src/conf.sh.
6660 * configure.in (*-*-lynxos*): Don't configure newlib for either
6661 native or cross Lynx.
6665 * config.sub (sparc64-elf): Fix os.
6666 (z8k): Remove duplicate.
6670 * Makefile.in (gcc-no-fixedincludes): Touch gcc/include/fixed, not
6671 gcc/stmp-fixproto, to try to prevent fixproto from being run.
6675 * configure: Make file links cleanly even if Lynx fails on
6676 an NFS symlink (at least fail cleanly).
6680 * test-build.mk (CC): For mips-sgi-irix4, change -XNh1500 to
6685 * configure: Unknown options are fatal again.
6689 * configure: Ignore --x-includes and --x-libraries, for Autoconf
6694 * build-all.mk: Add `clean' target.
6698 * config.guess: Add SINIX support.
6699 * configure.in: Add mips-*-sysv4* support.
6703 * build-all.mk: Document all useful targets.
6704 If canonhost is sparc-sun-solaris2.3, change it to sparc-sun-solaris2.
6705 If canonhost is mips-sgi-irix4.0.5H, change it to mips-sgi-irix4.
6709 * configure: Support --silent, --quiet.
6713 * configure: Support --disable-FEATURE.
6717 * config.guess: Recognize NCR running SVR4.3.
6721 * config.guess: Make BSDI generate i386-unknown-bsd386.
6726 * configure.in (powerpc-*-aix*): Treat like rs6000-*-*.
6730 * configure: Make unrecognized options give nonfatal warnings
6731 instead of fatal errors, and pass them to any subdirectory
6732 configures in case they recognize them.
6733 Make --x equivalent to --with-x.
6737 * configure: Add --enable-* options. Clean up usage message and
6742 * Makefile.in (NM_FOR_TARGET): Build tree version is now nm.new.
6746 * configure.in (hppa*-*-*): Enable binutils.
6750 * config.sub: Recognize cisco.
6754 * Makefile.in (CXXFLAGS): Add -fexternal-templates.
6758 * config.guess: about target *-hitachi-hiuxwe2, don't print more
6759 than one configuration name. Add comment.
6763 * config.guess: about target *-hitachi-hiuxwe2, fixed
6764 machine guessing order. [Hitachi's CPU_IS_HP_MC68K
6765 macro is incorrect.]
6769 * Makefile.in (TAGS): Just build TAGS in each subdirectory, rather
6770 than the "make ls" stuff which used to be here.
6774 * config.guess: Recognize i[34]86-unknown-freebsd.
6779 * configure.in (noconfigdirs for alpha): Remove libg++ and libio.
6783 * config.guess: Check for ptx.
6787 * config.sub: Add os9k checking.
6791 * config.guess: Handle OSF1 running on HPPA processors
6795 * configure: If subdir configure fails, print out a message with
6796 subdirectory name, in case subdir's configure code didn't identify
6801 * configure.in: Remove embedded newlines from configdirs.
6802 Avoid mismatches of substrings. Fix matching strings at end
6805 Fri Feb 11 15:33:33 1994 Stu Grossman (grossman at cygnus.com)
6807 * config.guess: Add Lynx/rs6000 config support.
6811 * configure.in (alpha-dec-osf1*, alpha*-*-*): Build gas.
6815 * configure.in (hppa*-*-osf*): Treat this just like most other
6816 PA configurations (eg no binutils or ld).
6817 (hppa*-*-*elf*): These configurations have binutils and ld.
6825 * configure.in (rs6000-*-*): Build gas.
6829 * Makefile.in: Avoid bug in losing hpux sed.
6833 * Makefile.in, test-build.mk: Remove MUNCH_NM; it was only needed
6834 for GDB and GDB has been fixed to not need it.
6836 Mon Jan 31 18:40:55 1994 Stu Grossman (grossman at cygnus.com)
6838 * config/mh-lynxosrs6k: Account for lack of ranlib!
6842 * config.guess: Recognize vax hosts.
6846 * configure (while loop): Don't use "break 2" inside case
6847 statement -- the case statement isn't an enclosing loop.
6851 * config.guess: Clean up NeXT support, to allow nextstep
6852 on Intel machines. Make OS be nextstep.
6856 * config.guess: Add alternate forms for Convex.
6858 Thu Jan 20 16:13:41 1994 Stu Grossman (grossman at cygnus.com)
6860 * configure: Completely rewrite option processing. Take
6861 advantage of pattern-matching to avoid invoking test frequently.
6862 Also clean up host and target defaulting logic.
6866 * Makefile.in: Replace all occurrances of "rootme" with "r" and
6867 "$${rootme}" with "$$r", to increase the likelihood that the do-*
6868 commands (plus user environment) will fit SCO limits.
6872 * configure.in: Don't issue warnings about directories which are
6873 not being configured if -norecursion is set. Correct test for
6874 --with-gnu-as and --with-gnu-ld to not get confused by substring
6877 * configure.in: Don't build gas for alpha-dec-osf1*.
6879 Tue Jan 4 17:10:19 1994 Stu Grossman (grossman at cygnus.com)
6881 * configure: Back out Per's change of 12/19/1993. It changes the
6882 behavior of configure in unexpected and confusing ways.
6884 Also, use different delim char when calculating
6885 program_transform_name so that the name can contain slashes.
6889 * configure.in, config.sub: Add support for VSTa micro-kernel.
6893 * configure.in: Nuke hacks which were used to get a special
6894 version of GAS for HPPA configurations.
6898 * configure: If only ${target_alias} is given, use that
6899 as the default for ${host_alias}.
6900 * configure: Add missing back-slashes before nested quotes.
6904 * Makefile.in (BASE_FLAGS_TO_PASS): add YACC=$(BISON)
6908 * config.guess: Recognize some Tektronix configurations.
6913 * config.sub: Match any flavor of SH.
6917 * configure.in: Don't try to configure newlib for Alpha.
6921 * configure.in: Don't build ld for Irix 5. Don't build gas,
6922 libg++ or libio for any Alpha target.
6924 * configure.in (mips*-sgi-irix5*): New target; use mh-irix5.
6925 * config/mh-irix5. New file for Irix 5.
6929 * Makefile.in (GZIPPROG): Renamed from GZIP, which gzip uses for
6930 default arguments -- so it tried to compress itself.
6934 * configure.in (notsupp): ensure that a space is always at the end
6935 of the configdirs list, since the grep checks for an explicit space
6939 * configure.in (target i386-sysv4.2): don't build ld, since static
6940 versions of many libraries are not available.
6944 * config.guess: Recognize Apollos (using environment variables).
6945 * configure.in: Don't configure ld, binutils, or gprof for Apollo.
6949 * config.guess: Recognize Sony news mips running newsos.
6953 * Makefile.in (all-cygnus, build-cygnus): "fi else" needs to be
6954 "fi ; else" for bash.
6958 * Makefile.in (BASE_FLAGS_TO_PASS): pass SHELL.
6962 * config.sub: accept unixware as an alias for svr4.2.
6963 Fix some inconsistancies with the gcc version.
6967 * Makefile.in (DISTDOCDIRS): Add gdb.
6971 * Makefile.in (DISTDOCDIRS): Add libg++ and libio.
6975 * Makefile.in (taz): Only build "info" in DISTDOCDIRS.
6976 (DISTDOCDIRS): Don't assume libg++ and gdb folks necessarily want
6981 * config.sub: Accept hiux* as an OS name.
6983 * Makefile.in: Change RUNTEST_FLAGS back to RUNTESTFLAGS per
6984 etc/make-stds.texi. The underscore came from gcc, and dje now
6985 agrees that RUNTESTFLAGS is the correct name.
6989 * install.sh: Remove 'set -e'. It makes any conditionals
6990 in the script useless.
6992 * config.guess: Automatically recognize arm-acorn-riscix
6997 * Makefile.in: Change RUNTESTFLAGS to RUNTEST_FLAGS
7001 * Makefile.in (DISTDOCDIRS): New variable.
7002 (taz): Edit local Makefile.in sooner, instead of proto-toplev
7003 Makefile.in later. Build "info" and "dvi" in DISTDOCDIRS.
7007 * configure.in (hppa target): check the source directory for the
7012 * config.sub: Allow -aout* and -elf*.
7016 * configure.in: Don't build ld on i386-solaris2, same as for
7021 * Makefile.in (taz): Add texinfo/lgpl.texinfo (for libg++).
7025 * configure.in: Configure gdb for alpha.
7029 * Makefile.in (CXXFLAGS): Add -O.
7033 * config.guess: added support for DG Aviion
7037 * configure.in: Produce warning message for subdirectories not
7038 configurable for this host/target combination. Don't try to
7039 configure gdb for vms.
7043 * Makefile.in (taz): Replace "byacc" with "bison -y" in the
7044 appropriate files before making "diststuff".
7045 (DISTBISONFILES): New var: list of files to be edited.
7046 (DISTSTUFFDIRS): Add binutils.
7050 * config.sub: also handle mipsel and mips64el (for little endian mips)
7054 * configure.in: Add * to end of all OS names.
7058 * configure.in: Build newlib for LynxOS native.
7062 * config.guess: Add support for delta 88k running SVR3.
7064 * configure.in: Add comment about HP compiler vs. emacs.
7068 * configure.in: don't build ld on solaris2 (not a viable option
7069 due to bugs in getpwnam & getpwuid)
7073 * configure.in: Accept alpha-dec-osf1*, not just -osf1, since
7074 config.guess will produce a full version number.
7078 * configure.in: Build linker and binutils for alpha-dec-osf1.
7082 * Makefile.in: Remove -O from CXXFLAGS for consistency with CFLAGS,
7083 and gdb/testsuite/Makefile.in.
7087 * configure.in: recognize mips*- instead of mips-
7091 * config.sub: Accept linux*coff and linux*elf as operating
7096 * ltmain.sh: Handle symlinks in generated script.
7100 * config.sub: Recognize mips64, and mips3 as an alias for it.
7104 * configure.in: Remove alpha-dec-osf*, no longer necessary now that
7105 gdb knows how to handle OSF/1 shared libraries.
7109 * configure.in: Recognize hppa*-*-hiux* (currently synonym for hpux).
7110 * config.guess: Recognize Hitachi's HIUX.
7111 * config.sub: Recognize h3050r* and hppahitachi.
7112 Remove redundant cases for hp9k[23]*.
7116 * configure.in: default to '--with-gnu-as' and '--with-gnu-ld'
7117 if gas and ld are in the source tree and are in ${configdirs}.
7118 If ${use_gnu_as} or ${use_gnu_ld} are 'no', then don't set the
7119 --with options (but still pass them down on the command line,
7120 if they were explicitly specified).
7124 * configure: Handle autoconf style directory options: --bindir,
7125 --datadir, --includedir, --infodir, --libdir, --libexecdir,
7126 --mandir, --oldincludedir, --sbindir, --sharedstatedir,
7128 * Makefile.in (sbindir, libexecdir, sysconfdir): New variables.
7129 (sharedstatedir, localstatedir, oldincludedir): New variables.
7130 (BASE_FLAGS_TO_PASS): Pass down bindir, datadir, includedir,
7131 infodir, libdir, libexecdir, localstatedir, mandir, oldincludedir,
7132 sbindir, sharedstatedir, and sysconfdir.
7136 * configure: substitute SHELL value in Makefile.in with
7141 * ltmain.sh: Tweak shell pattern to avoid bug in NetBSD /bin/sh.
7145 * configure.in: Build gas, ld, and binutils for *-*-sysv4* and
7146 *-*-solaris2* targets.
7150 * Makefile.in: define M4, and pass it down to sub-makes;
7151 all-autoconf now depends on all-m4
7155 * Makefile.in ({AR,RANLIB}_FOR_TARGET): make contingent on
7156 presence of {ar,ranlib} instead of a configured directory
7160 * config.guess: Accept 34?? as well as 33?? for NCR.
7164 * configure.in: grab mt-hppa for HPPA targets; use 'gas ' instead
7165 of 'gas' in sed commands, since 'gash' is now in the tree as well.
7169 * configure: grab values for $(CC) and $(CXX) from the
7170 environment, so that someone can do "CC=gcc configure; make" and
7171 have it work right (matching the way that autoconf works now)
7173 * configure.in, Makefile.in: add support for gash, the tcl
7176 * config.guess: add NetBSD variants (hp300, x86)
7180 * install.sh: Support -d option (in the manner of SunOS 4 install,
7181 as it is more deterministic than that of GNU install)
7182 (chmodcmd): Set file to mode 755 by default (should also do default
7183 chgrp and chown, but I don't feel like dealing with that now)
7187 * config.sub: Remove h8300hhms alias.
7191 * configure.in: Match *-*-solaris2* not *-sun-solaris2*.
7195 * Makefile.in (gcc-no-fixedincludes): touch stmp-fixproto as well
7200 * config.sub: recognize m88110-bug-coff.
7204 * Makefile.in (all-libio): all dependencies on the toolchain used
7205 to build this (gcc, gas, ld, etc)
7209 * config.guess: Deal with OSF/1 1.3 on alpha.
7213 * install.sh: add some 'else true' clauses for portability
7215 * configure.in: don't build libio for h8[35]00-*-* targets
7219 * Makefile.in: Add support for new libio.
7223 * install.sh: If one command fails, don't try the rest. Don't try
7224 to remove $dsttmp (via trap) unless we have already created it.
7225 If $src doesn't exist, detect it and exit with an error.
7227 * config.guess: Recognize BSD on hp300.
7231 * config.guess: Map (9000/[34]??:HP-UX:*:*) to m68k-hp-hpux.
7236 * Makefile.in (all-send-pr): depends on all-prms
7240 * config.guess: Fix typo (9000/8??:4.3bsd -> 9000/7??:4.3bsd).
7245 Added test for mips-mips-riscos5.
7249 * configure.in: use mh-hp300 for 68k HP hosts
7253 * configure: add support for CONFIG_SHELL, so that you can use
7254 some alternate shell for evaluating configure scripts
7258 * Makefile.in (make-gdb.tar.gz): Sed bug reporting address
7260 distribution archive.
7261 * Makefile.in (COMPRESS): Remove def.
7262 * Makefile.in (gdb.tar.gz, make-gdb.tar.gz): Renamed from
7263 gdb.tar.Z and make-gdb.tar.Z respectively.
7264 * Makefile.in (make-gdb.tar.gz): Now only build gzip'd archive.
7265 * Makefile.in (make-gdb.tar.gz): Minor changes to move closer
7266 to convergence with 'taz' target in Makefile.in.
7270 * install.sh (dsttmp): use trap to ensure that tmp files go
7271 away on error conditions
7275 * Makefile.in (BASE_FLAGS_TO_PASS): remove LOADLIBES
7279 * Makefile.in (install-dirs): Deal with a prefix like /gnu;
7280 its parent is '/' not ''.
7282 * Makefile.in (DEVO_SUPPORT): Add comments about ChangeLog.
7286 * configure: if ${newsrcdir}/configure doesn't exist, don't assume
7287 that ${newsrcdir}/configure.in does.
7291 * test-build.mk: support for CONFIG_SHELL
7295 * config.sub (netware): Add as a basic system type.
7299 * Makefile.in (Makefile): depend on configure.in. Also drop the
7300 $(srcdir)/ from the dependency on Makefile.in.
7304 * config.sub: Recognize h8300hhms as h8300h-hitachi-hms.
7305 (h8300hhms is temporary until multi-libraries are implemented).
7306 * configure.in: Handle h8300h too.
7310 * config.guess: Recognize dpx/2 as m68k-bull-sysv3.
7314 * configure: Remove extraneous output when guessing host type.
7315 * config.guess: Remove extraneous output when guessing using C
7316 compiler rather than uname, or when guessing fails.
7318 Wed Jul 7 17:58:14 1993 david d `zoo' zuhn (zoo at rtl.cygnus.com)
7320 * Makefile.in: remove all.cross and install.cross targets
7322 * configure: remove CROSS=-DCROSS_COMPILE and ALL=all.cross
7327 * configure.in (target sh): Build gprof.
7329 Thu Jul 1 16:52:56 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
7331 * config.sub: change -solaris to -solaris2
7335 * configure.in: Use config/mh-riscos for mips-*-sysv*.
7339 * configure: Correct error message for missing Makefile.in to
7340 print correct directory.
7342 Tue Jun 29 13:52:16 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
7344 * install.sh: kludge around 386BSD shell bug
7348 * config.guess: Recognize NeXT.
7349 * config.guess: Recognize i486-ncr-sysv4.
7350 * Makefile.in (taz): rm $(TOOL)-$$VER before linking.
7354 * Makefile.in (MAKEINFOFLAGS): New variable.
7355 (FLAGS_TO_PASS): Pass MAKEINFO as MAKEINFO MAKEINFOFLAGS.
7356 * build-all.mk, test-build.mk: Pass down --no-split as
7357 MAKEINFOFLAGS when hosted on DOS. Compile DOS hosted without -g.
7361 * Makefile.in (DEVO_SUPPORT): Add COPYING COPYING.LIB install.sh.
7365 * Makefile.in (libg++.tar.z): New rule.
7366 * Makefile.in (taz): Replace 'configure -rm' by 'make distclean'.
7367 * Makefile.in (taz): Only do a single chmod.
7369 Fri Jun 18 12:03:10 1993 david d `zoo' zuhn (zoo at majipoor.cygnus.com)
7371 * install.sh: don't use dirname anymore (replaced with sed usage)
7375 * Makefile.in: Change extension for gzip'd files from '.z' to
7376 '.gz' per new FSF standard usage.
7378 Thu Jun 17 16:58:50 1993 david d `zoo' zuhn (zoo at majipoor.cygnus.com)
7380 * configure: put quotes around the final value of program_transform_name
7382 Tue Jun 15 16:48:51 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
7384 * Makefile.in: new install.sh support; update install-info rules
7388 * configure.in: Build diff for crosses, but not for go32 host.
7390 * configure.in: Build gprof only for native, and don't build it
7391 for mips-*-*, rs6000-*-*, or i[34]86-*-sco*.
7393 Mon Jun 7 13:12:11 1993 david d `zoo' zuhn (zoo at deneb.cygnus.com)
7395 * configure.in: don't build gas,ld,binutils on for *-*-sysv4
7399 * configure.in (host_tools): Add prms.
7401 Fri Jun 4 13:30:42 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
7403 * Makefile.in: install gcc, do installation of $(INSTALL_MODULES)
7404 with $(FLAGS_TO_PASS) on the command line
7406 * config.sub: Recognize lynx and lynxos
7410 * config.sub: Accept -ecoff*, not just -ecoff.
7414 * Makefile.in (taz): Use .gz suffix instead of .z.
7415 (binutils.tar.gz, gas+binutils.tar.gz, gas.tar.gz): Fixed target
7418 Thu Jun 3 00:27:06 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
7420 * Makefile.in (vault-install): add an 'else true' (for Ultrix)
7422 Wed Jun 2 18:19:16 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
7424 * Makefile.in (install-no-fixedincludes): install gcc last, so
7425 that rebuilds that might happen during 'make install' don't get
7426 bogus gcc include files
7430 Change from Utah for HPPA support:
7431 * config.guess: Recognize hppa1.x-hp-bsd.
7435 * config.guess: Add support for Motorola Delta 68k, up to r3v7.
7438 Tue Jun 1 17:48:42 1993 Rob Savoye (rob at darkstar.cygnus.com)
7440 * config.sub: Add support for rom68k and bug boot monitors.
7444 * Makefile.in: Make all-opcodes depend on all-bfd.
7448 * config.guess: Added special check for i[34]86-univel-sysv4*.
7452 * config.guess: For i[34]86-unknown-sysv4 use UNAME_MACHINE for
7453 the processor rather than assuming i486.
7457 * config.guess: Recognize SunOS6 as Solaris3.
7461 * config.guess: Fix typo. Avoid #elif (not in K&R 1).
7462 Recognize SunOS 5.* only (and not [6-9].*) as being Solaris2.
7466 * build-all.mk (all-cross): New target for Canadian Cross.
7467 Added Q2 go32 targets.
7468 * test-build.mk: Configure go32 cross sparclite-aout and
7469 mips-idt-ecoff -with-gnu-ld. Moved build binary directory from
7470 PARTIAL_HOLE_DIRS to BUILD_HOLES_DIRS.
7472 Mon May 24 15:30:06 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
7474 * configure.in: fix Alpha GDB typo; also, don't build DejaGnu for
7475 GO32 hosted toolchains
7477 Mon May 24 14:18:41 1993 Rob Savoye (rob at darkstar.cygnus.com)
7479 * configure: change so "-exec-prefix" gets passed down rather
7480 than "-exec_prefix" so autoconf generated Makefiles get the
7481 exec_prefix set right.
7483 Fri May 21 10:42:25 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
7485 * config.guess: get the Solaris2 minor version number
7487 * Makefile.in: add standards.texi and make-stds.texi to ETC_SUPPORT
7491 * config.guess: Recognize some Sequent platforms.
7493 Thu May 20 14:33:48 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
7495 * Makefile.in: added the vault-install target
7497 * configure.in: actually use the Sun3 makefile fragment that's in
7498 config, also added the release dir to configdirs
7502 * Makefile.in (taz): Fix modes on stuff in $(TOOL) dir also.
7504 Tue May 18 20:26:41 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
7506 * configure.in: remove some program from Alpha targetted toolchains
7510 * Makefile.in (DISTSTUFFDIRS): Renamed from PROTODIRS. Add ld and
7512 (taz): Run "make diststuff" in those directories instead of "make
7513 proto-dir". Look for "VERSION=" only at start of line in subdir
7514 Makefile. Use "gzip -9" for compression.
7515 (TEXINFO_SUPPORT, DIST_SUPPORT, BINUTILS_SUPPORT_DIRS): New vars.
7516 (binutils.tar.z): New target.
7520 * Makefile.in (taz): Include gpl.texinfo.
7524 * Makefile.in (setup-dirs): Merged into "taz" target.
7525 (taz): Only do `proto-dir' stuff if a directory is actually needed
7530 * Makefile.in (MUNCH_NM): New variable, defined to be $(NM).
7531 (FLAGS_TO_PASS): Pass down MUNCH_NM.
7532 (HOST_CC, HOST_PREFIX, HOST_PREFIX_1): New variables.
7533 (EXTRA_GCC_FLAGS): Pass down HOST_* variables.
7534 (gcc-no-fixedincludes): Correct for current gcc Makefile.
7538 * Makefile.in (make-gdb.tar.Z): Add configure, config.guess,
7539 config.sub, and move-if-change to gdb testsuite distribution
7540 archive, so the testsuite can be extracted, configured, and
7541 run separately from the gdb distribution. Blow away the Chill
7542 tests that require a Chill compiled executable, since GNU Chill
7543 is not yet publically available.
7545 Mon May 10 17:22:26 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
7547 * test-build.mk: set environment variables in a single command,
7548 instead of a list of assignments and exports
7550 * config.guess: recognize Alpha/OSF1 systems
7554 * configure: Change help message to prefer --options rather than
7559 * config.sub: Convergent Tech. "miniframe" uses m68010, sez
7561 * config.guess: Recognize miniframe.
7563 Sun May 9 17:47:57 1993 Rob Savoye (rob at darkstar.cygnus.com)
7565 * Makefile.in: Use srcroot to find runtest rather than rootme.
7566 Pass RUNTESTFLAGS and EXPECT down in BASE_FLAGS_TO_PASS.
7570 * test-build.mk: Extensive additions to support building on a
7571 machine other than the host.
7575 * configure (tooldir): Fix for i386-aix again.
7579 * configure, Makefile.in: Change definition of $(tooldir)
7584 * config.guess: Recognize i[34]86/SVR4.
7588 * Makefile.in (all-gdb): gdb depends on sim.
7592 * Makefile.in (gdb.tar.Z): Make prototype gdb testsuite directory
7593 at the same time we make the prototype gdb directory.
7594 * Makefile.in (make-gdb.tar.Z): Make the testsuite distribution
7595 files at the same time as the gdb base release distribution.
7599 * Makefile.in (check): Use individual check targets rather than
7605 * config.sub: Use sysv3.2 not sysv32 for canonical OS
7606 for System V release 3.2.
7610 * config.sub: Recognize hppaosf.
7611 * configure.in: Do configure ld/binutils/gas for it.
7615 * configure (tooldir): Alter syntax used to set this, for systems
7616 where "\$" isn't handled right, like i386-aix.
7620 * configure: Pass program-transform-name, not
7621 program_transform_name, to recursive configures.
7625 * Makefile.in (gas+binutils.tar.z): New rule for building snapshots
7630 * config.guess: Recognize AIX3.2 as distinct from 3.1.
7632 Sat Apr 17 17:19:50 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
7634 * configure.in: rename m88k-motorola-m88kbcs to m88k-motorola-sysv
7636 * config/mh-delta88: remove extraneous GCC references
7640 * Makefile.in (PRMS): Set back to all-prms.
7644 * test-build.mk: Pass -with-gnu-as for known MIPS native and MIPS
7645 targets, rather than for MIPS hosts.
7647 Fri Apr 9 13:51:06 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
7649 * configure.in: add comment for --with-x default values
7651 * config.guess: handle Motorola Delta88 box for SVR3 and SVR4.
7653 * Makefile.in: add check-* targets for each of the directories in
7654 the tree. Add a definition of RUNTEST that will use the one we
7655 just built, if it exists. Pass this down via FLAGS_TO_PASS.
7659 * configure.in: Removed obsolete references to bfd_target and
7660 target_makefile_frag.
7662 * build-all.mk: Set assorted targets for Q2.
7663 * config.sub: Recognize z8k-sim and h8300-hms.
7664 * test-build.mk: Really don't pass host to configure.
7665 (HOLES): Added uname.
7669 * configure: Handle an empty program-prefix, program-suffix or
7670 program-transform-name correctly.
7674 * build-all.mk: -G 8 no longer required for MIPS targets.
7675 * test-build.mk: Don't pass host argument to configure; make it
7680 * Makefile.in (gdb.tar.Z): Fix for building gzip'd distribution.
7681 * Makefile.in (COMPRESS): New macro, like GZIP.
7685 * test-build.mk: Use -with-gnu-as for mips-sgi-irix4 as well.
7687 * build-all.mk: Set GCC to gcc -O -G 8 for MIPS targets, since gcc
7688 with gas currently defaults to -G 0.
7692 * Makefile.in (all-flex): flex depends on byacc.
7694 * build-all.mk: If host not specified, use config.guess. Pass TAG
7695 to test-build.mk as RELEASE_TAG.
7696 * test-build.mk (configargs): New variable containing arguments to
7697 pass to configure. Set to -with-gnu-as on mips-dec-ultrix.
7698 (FLAGS_TO_PASS): Pass down RELEASE_TAG.
7700 * config.guess: Use /bin/uname when checking -X argument on SCO,
7701 to avoid invoking GNU uname which doesn't understand -X.
7703 * test-build.mk: Don't use /usr/unsupported/bin/as on AIX.
7705 * configure.in: Build gas for mips-*-*.
7709 * Makefile.in (all.normal): insert missing backslash.
7713 * build-all.mk, config/mh-irix4: Bump -XNh value to 1500 to match
7716 * Makefile.in: Complete overhaul to merge many almost identical
7721 * Makefile.in (setup-dirs-gdb): Renamed from setup-dirs.
7722 (gdb.tar.Z): Adjusted.
7724 * Makefile.in (setup-dirs, taz): New targets; should be general
7725 enough to adapt for gdb sometime. Build only .z file.
7726 (gas.tar.z): New target.
7730 * build-all.mk: Use CC=cc -Xs on Solaris.
7732 Mon Mar 29 19:59:26 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
7734 * config/mh-sun3: cc needs -J to compile cp-parse.c correctly
7736 * config/mh-solaris: SunPRO C needs -Xs to be able to get a
7737 working xmakefile for Emacs.
7742 for handling BISON for FSF releases.
7746 * configure: Actually implement the change zoo just documented.
7748 Wed Mar 24 13:02:44 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
7750 * configure: when using config.guess, only set target_alias when
7751 it's not already been set (ie, on the command line)
7753 Mon Mar 22 23:07:39 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
7755 * Makefile.in: add installcheck target, set PRMS to install-prms
7757 Sun Mar 21 16:46:12 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
7759 * configure: add support for package_makefile_fragment, handle the
7760 case where a directory has a configure.in file but no Makefile.in
7761 more gracefully (with an actual understandable error message, even);
7762 add support for --without (and add this to the usage message); also
7763 explicitly add a --host=${host_alias} to the command line when
7764 config.guess is used
7768 * configure: Must use both --host and --target in recursive calls.
7772 * Makefile.in: Change deja-gnu to dejagnu.
7776 * configure.in (h8300-*-*, h8500-*-*): Don't build libg++.
7778 Fri Mar 12 18:30:14 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
7780 * configure.in: canonicalize all instances to *-*-solaris2*,
7781 also strip out a number of tools to not build for go32 host
7785 * config.guess: add GPL.
7787 * Makefile.in, config.guess, config.sub, configure: bump
7792 * Makefile.in (do-info): Removed obsolete check for existence of
7795 * Makefile.in (MAKEOVERRIDES): Define to be empty.
7797 Wed Mar 10 03:11:56 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
7799 * Makefile.in: a couple of 'else true' for decstation,
7802 * configure.in: configure tclX too; don't remove Tk on RS/6000 anymore
7806 * Makefile.in (setup-dirs): change invocation of make to $(MAKE).
7808 Mon Mar 8 14:52:11 1993 Ken Raeburn (raeburn@cambridge)
7810 * config.guess: Recognize i386-ibm-aix (PS/2).
7811 * configure.in: Use config/mh-aix386 file for it.
7815 * Makefile.in (GCC_FOR_TARGET): Eliminated definition; use
7816 CC_FOR_TARGET instead.
7817 (BASE_FLAGS_TO_PASS): Pass GCC_FOR_TARGET=$(CC_FOR_TARGET).
7821 * Makefile.in: Add sim to list of directories sent with gdb
7825 * configure.in: Put back mips-dec-bsd* case.
7830 * configure.in (vax-*-ultrix2*): Add Ultrix 2.2 triplet.
7831 * config.guess: Change 'VAX*:ULTRIX:*:*' to 'VAX*:ULTRIX*:*:*'.
7832 * config/mh-vaxult2: New file.
7834 Tue Mar 2 18:11:03 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
7836 * configure.in: remove no-op mips-dec-bsd* in "case $target"
7838 * Makefile.in (dir.info): only run gen-info-dir if it exists,
7839 (install-info): install dir.info only if it exists,
7840 (all-expect, install-expect): pass along X11_FLAGS_TO_PASS
7844 * configure.in: For vms target, skip bfd, ld, binutils. Do build
7845 gas for mips-dec-bsd.
7849 * configure (makesrcdir): If ${srcdir} is relative and not ".",
7850 and ${subdir} is not ".", set makesrcdir based on ${invsubdir}.
7854 * configure.in: Added "dejagnu" to hosttools list.
7858 * config.sub, configure.in, config.guess: Add support
7859 for Bosx, an AIX variant from Bull.
7864 * devo/dejagnu: Initial creation of devo/dejagnu.
7865 Migrated dejagnu testcases and support files for testing software
7866 tools to reside as subdirectories, currently called "testsuite",
7867 within the directory of the software tool. Migrated all programs,
7868 support libraries, etc. beloging to dejagnu proper from
7869 devo/deja-gnu to devo/dejagnu. These files were moved "as is"
7870 with no modifications. The changes to these files which will
7871 allow them to configure, build, and execute properly will be made
7876 * Makefile.in: Change send_pr to send-pr.
7877 * configure.in: Likewise.
7878 * send_pr: Renamed directory to send-pr.
7882 * Makefile.in: Add some extra semi-colons (needed if SHELL=bash).
7886 * README: Update for gdb-4.8 release.
7887 * Makefile.in (gdb.tar.Z): Add texinfo/tex3patch. Build
7888 gdb-xxx.tar.z (gzip'd) file also.
7890 Thu Feb 18 09:16:17 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
7892 * Makefile.in: make all-diff depend on all-libiberty
7896 * config.guess: add vax-ultrix in the spirit of mips-ultrix.
7898 Tue Feb 16 05:57:15 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
7900 * configure.in, Makefile.in: add hello, tar, gzip, recode, indent
7904 * Makefile.in (DEVO_SUPPORT): Remove etc directory
7905 (ETC_SUPPORT): Only add the files GDB wants from etc/.
7906 (gdb.tar.Z): Use ETC_SUPPORT. Use byacc when building the file.
7908 Thu Feb 11 20:14:28 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
7910 * Makefile.in: makeinfo binary is in a new location
7914 * config.sub: Accept -ecoff as an OS.
7916 * Makefile.in: Various changes to eliminate a level of make
7917 recursion and reduce the required command line length.
7918 (BASE_FLAGS_TO_PASS): New variable holding flags passed to all
7920 (EXTRA_HOST_FLAGS, EXTRA_TARGET_FLAGS, EXTRA_GCC_FLAGS): New
7921 variables holding settings for specific sub-makes.
7922 (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS, GCC_FLAGS_TO_PASS): Rewrote
7923 in terms of BASE_FLAGS_TO_PASS.
7924 (TARGET_LIBS): New variable listing directories which use
7925 TARGET_FLAGS_TO_PASS.
7926 (subdir_do): Eliminated.
7927 (do-*): New set of targets to replace subdir_do.
7928 (various): All targets which used subdir_do now depend on do-*.
7929 (local-clean): Renamed from do_clean.
7930 (local-distclean): New target, dependency of distclean and
7932 (install-info): Don't create directories. Depend on dir.info
7933 rather than calling make recursively.
7934 (install-dir.info): Eliminated.
7935 (install-info-dirs): Create all info directories here.
7936 (dir.info): Depend upon do-install-info.
7938 * test-build.mk (HOLES): Added false.
7942 * config.guess: Recognize BSDI and BSDJ (Jolitz 386bsd).
7944 Thu Feb 4 20:49:18 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
7946 * Makefile.in (info): remove dependency on all-texinfo. The
7947 problem was really in texinfo/C, not at this level.
7951 * Makefile.in (info): Added dependency on all-texinfo (PR 2112).
7955 * Makefile.in (make-gdb.tar.Z): Change BISON to 'bison -y' for
7960 * configure: Include srcdir in message about target of link not
7961 being found. Don't convert `-' to `_' in `with' options being
7964 Tue Feb 2 18:57:59 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
7966 * configure.in: add uudecode to host_tools
7968 * Makefile.in: added {all,install}-uudecode targets, added them to
7969 the appropriate lists
7973 * Makefile.in (all-gcc): Added dependency on all-gas.
7975 * configure.in (mips-*-*): Build ld and binutils.
7979 * configure: check return code from mkdir, print error message and
7984 * Makefile.in (make-gdb.tar.Z): New location for texinfo.tex.
7988 * test-build.mk (HOLES): Added tar, cpio and uudecode.
7992 * config.sub (h8500): Recognize this as a cpu type.
7994 Sat Jan 23 20:32:01 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
7996 * configure: source directory missing is no longer a warning
7998 * configure.in: recognize irix[34]* instead of irix[34]
8000 * Makefile.in: define and pass down X11_LIB
8002 * config/mh-sco: define X11_LIB to the mess that SCO ODT requires
8006 * guess-systype: Renamed to ...
8007 * config.guess: ... by popular request.
8008 * configure.in, Makefile.in: Update accordingly.
8013 + Add Convex, Cray/Unicos, and Encore/Multimax support.
8014 + Execute ./dummy instead of assuming . is in PATH.
8018 * guess-systype: New shell script. Attempts to guess the
8019 canonical host name of the executing host.
8020 Only a few hosts are supported so far.
8021 * configure: Call guess-systype if no host is specified.
8025 * Makefile.in (gcc-no-fixedincludes): Made to work with current
8031 * Makefile.in (GCC_FLAGS_TO_PASS): New variable.
8032 (all-gcc, install-gcc, subdir_do): Use it.
8036 * Makefile.in: Rename uninstalled gcc driver from gcc to xgcc.
8040 * Makefile.in: Removed explicit setting of SUBDIRS. SUBDIRS is now
8041 set exclusively by configure, using configure.in .
8043 Wed Jan 6 13:44:11 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8045 * test-build.mk: set $PATH for all builds
8047 * Makefile.in: pass TARGET_FLAGS_TO_PASS for xiberty and libm
8051 * Makefile.in (GCC_FOR_TARGET): Supply a default that matches
8052 the one used in gcc/Makefile.in, so that a null expansion doesn't
8053 override the one needed to build gcc with a native cc.
8058 * configure: Accept -with arguments.
8062 * Makefile.in: added h8300sim
8066 * config/mh-sco: Don't override BISON definition.
8068 * build-all.mk: If canonhost is i386-unknown-sco3.2v4, change it
8069 to i386-sco3.2v4. Set TARGETS and CFLAGS for i386-sco3.2v4.
8070 (all-cygnus, native, build-cygnus): Make
8071 $(canonhost)-stamp-3stage-done, not $(host)....
8072 * test-build.mk (stamp-3stage-compared): Use tail +10c for
8073 i386-sco3.2v4. Added else true to if command.
8077 * config.sub: (from FSF) Sequent uses a BSD-like OS.
8081 * configure.in (i[34]86-*-isc*): added; uses mh-sysv.
8083 Thu Dec 24 17:26:24 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8085 * configure.in: don't remove binutils from Solaris builds
8089 * Makefile.in: get rid of earlier definitions for *clean,
8090 also handle the recursive info rule better
8094 * Makefile.in (mostlyclean, distclean, realclean): Fix to
8095 do more-or-less the right thing.
8099 * Makefile.in: Add lines defining CC and CXX, and use CXX rather
8100 than gcc in definitions of CXX_FOR_BUILD and CXX_FOR_TARGET.
8102 Tue Dec 15 00:34:32 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8104 * Makefile.in: change all $(host_cpu)-$(host_vendor)-$(host_os) to
8107 * configure.in: split the configdirs list into 4 categories (native
8108 v. cross, library v. tool) and handle the cross-only and native-
8109 only in more reasonable (and correct!) way.
8111 Mon Dec 14 17:04:22 1992 Stu Grossman (grossman at cygnus.com)
8113 * configure.in (hppa*-*-*): Don't remove bfd and gdb from
8116 Sun Dec 13 00:37:26 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8118 * Makefile.in: extensive cleanup:: removed all of the explicit
8119 clean-* targets, collapsed many wrappers around subdir_do into
8120 one, added additional targets to satisfy standards.texi, deleted
8121 some old targets, some changes for consistency
8123 Fri Dec 11 20:18:02 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8125 * configure.in: handle some programs as cross-only, and others as
8128 * test-build.mk: handle partial holes in a more generic manner
8130 * Makefile.in: m4 depends on libiberty
8132 Mon Dec 7 06:43:27 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8134 * config/mh-sco: don't default $(CC) to gcc
8136 Thu Dec 3 21:52:11 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8138 * configure.in: add m4, textutils, fileutils, sed, shellutils,
8139 time, wdiff, and find to configdirs
8141 * Makefile.in: all, clean, and install rules for the new programs
8142 added to configure.in
8144 Mon Nov 30 14:54:34 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8146 * configure.in: use mh-sun for all *-sun-* hosts
8148 * config/mh-solaris: rework standard X location to use
8149 $OPENWINHOME, if defined.
8151 * config/mh-sun: handle X11 include locations
8153 * config/mh-decstation: define NeedFunctionPrototypes to 0, to
8154 work around dain-bramaged DECwindows include files
8156 Fri Nov 27 18:35:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8158 * Makefile.in: define flags for X11 include files and library file
8159 locations, pass them down to the programs that need this info
8161 * build-all.mk: added a 'native' target, to 3stage the native toolchain
8163 * config/{mh-hpux,mh-solaris}: define the "standard" locations for
8164 the vendor supplied X11 headers and libraries
8166 Sun Nov 22 18:59:13 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8168 * configure.in: start building libg++ for HP-UX targets
8172 * README: Update references to files moved into etc/.
8176 * config.sub (i386sol2, i486sol2): i[34]86-unknown-solaris2.
8177 * configure.in (i[34]86-*-solaris2*): Use config/mh-sysv4.
8181 * configure: accept dash as well as underscore in long option
8182 names for FSF compatibility.
8186 * config.sub: added -sco3.2v4 support from FSF.
8188 Sun Nov 8 21:14:30 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8190 * configure.in: expand the section that adds or removes
8191 directories from the list of programs to build, to handle native
8192 vs. cross in addition to host v. native
8196 * Makefile.in: Replace C++ in macro names with CXX.
8197 This is less likely to break ...
8199 Sat Nov 7 15:16:58 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8201 * test-build.mk: add -w to GNU_MAKE
8203 Fri Nov 6 23:10:37 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8205 * config.sub: remove 'sparc'-->'sparc-sun' default transformation,
8206 add 'sparc' to list of recognized cpus. This needed to make
8207 'sparc-aout' expand to 'sparc-unknown-aout' instead of 'sparc-sun-aout'.
8208 Delete some redundant ose68 variants. Recognize -wrs as an os,
8209 then changes that into $CPU-wrs-vxworks.
8211 * configure.in: remove most references to gdbtest, regularize
8212 target based program removal
8214 * test-build.mk: import from p3 tree (many fixes and changes)
8218 * Makefile.in: added rules to handle tcl, tk, and expect
8220 * configure.in: handle those directories if they exist
8222 Thu Nov 5 14:35:41 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8224 * config.sub: removed bogus hppabsd and hppahpux names, since
8225 "hppa" is not a valid cpu (hppa1.1 or hppa1.0 are, though)
8227 Thu Oct 29 00:12:41 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8229 * Makefile.in: all-gcc now depends on all-binutils. all-libg++
8230 depends upon all-xiberty
8232 * Makefile.in: changes from p3, including:
8236 * Makefile.in (XTRAFLAGS): include newlib directories if
8237 newlib/Makefile exists, rather than if host != target.
8241 * Makefile.in: added -nostdinc to XTRAFLAGS if we are using gcc
8242 from the same source tree and not building a cross-compiler. This
8243 matters for the libg++ configuration if reconfiguring a tree that
8244 has already been installed.
8248 * Makefile.in: added -I for newlib/targ-include to XTRAFLAGS, to
8249 pick up the machine and system specific header files.
8251 * Makefile.in: added AS_FOR_TARGET, passed down in
8252 TARGET_FLAGS_TO_PASS. Added CC_FOR_BUILD, which is intended to be
8253 the C compiler to use to create programs which are run in the
8254 build environment, set it to default to $(CC), and passed it down
8255 in FLAGS_TO_PASS and TARGET_FLAGS_TO_PASS.
8259 * Makefile.in: add $(host) = $(target) tests back to *_FOR_TARGET.
8260 We need them for unusual native builds, like systems without
8263 * configure: also define $(host_canonical) and
8264 $(target_canonical), which are the full, canonical names for the
8265 given host and target
8269 * Makefile.in: Added separate definitions for C++.
8273 * configure.in (configdirs): Add deja-gnu.
8277 * README: Update for configure.texi and gdb-4.7 release.
8281 * Makefile.in: Move "all" target to top of file.
8282 Previously, first target was ".PHONY" which caused BSD4.4 make
8283 to build .PHONY when make was run without arguments.
8287 * Makefile.in: Add COPYING.LIB to GDB releases, now that there's
8288 Library-copylefted code in libiberty.
8292 * config.sub: Replace m68kmote with plain old m68k.
8296 * Makefile.in: Remove space from blank line, avoid Make complaints.
8300 * config.sub: Complain if no argument is given. Added support for
8301 386bsd as OS and target alias.
8305 * Makefile.in (XTRAFLAGS): include newlib directories if
8306 newlib/Makefile exists, rather than if host != target.
8308 Mon Oct 5 03:00:09 1992 Mark Eichin (eichin at tweedledumber.cygnus.com)
8310 * config.sub: recognize sparclite-wrs-vxworks.
8312 * Makefile.in (install-xiberty): added *-xiberty make rules (from
8313 p3.) Added clean-xiberty to clean.
8315 Thu Oct 1 17:59:19 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8317 * configure.in: use *-*-* instead of nested cases for host and target
8321 * Makefile.in: added -nostdinc to XTRAFLAGS if we are using gcc
8322 from the same source tree and not building a cross-compiler. This
8323 matters for the libg++ configuration if reconfiguring a tree that
8324 has already been installed.
8328 * config.sub (i486v/i486v4): Merge in from FSF version.
8332 * configure: only set PWD if it is already set.
8336 * configure: just set PWD=`pwd` at the top, since Ultrix sh
8337 doesn't have unset and all success paths (and most error paths)
8338 out set it anyway. (Note: should change all uses of ${PWD=`pwd`}
8339 to just ${PWD} to avoid confusion.)
8343 * configure: always set $(tooldir) to $(libdir)/$(target_alias),
8344 even for a native compilation.
8348 Changes to make the gdb.tar.Z rule work better.
8350 * Makefile.in (GDB_SUPPORT_DIRS): Add opcodes.
8351 (DEVO_SUPPORT): Add configure.texi.
8352 (bfd-ilrt.tar.Z): Remove ancient rule.
8356 * Makefile.in: added -I for newlib/targ-include to XTRAFLAGS, to
8357 pick up the machine and system specific header files.
8359 * configure.in, config.sub: added new target m68010-adobe-scout,
8360 with alias of adobe68k. Changed configure.in to check for
8361 -scout before -sco* to avoid a false match.
8363 * Makefile.in: added AS_FOR_TARGET, passed down in
8364 TARGET_FLAGS_TO_PASS. Added CC_FOR_BUILD, which is intended to be
8365 the C compiler to use to create programs which are run in the
8366 build environment, set it to default to $(CC), and passed it down
8367 in FLAGS_TO_PASS and TARGET_FLAGS_TO_PASS.
8371 * Makefile.in: added TARGET_FLAGS_TO_PASS, CC_FOR_TARGET,
8372 AR_FOR_TARGET, RANLIB_FOR_TARGET, NM_FOR_TARGET. Pass
8373 TARGET_FLAGS_TO_PASS, which defines CC, AR, RANLIB and NM as the
8374 FOR_TARGET variants, to newlib and libg++.
8378 * Makefile.in (all-gas, all-gdb): Require all-opcodes to be built
8383 * config.sub: Accept `elf' as an environment.
8387 * Makefile.in (all-opcodes): cd into the right directory
8391 * configure: added -program_transform_name option, used as
8392 argument to sed when installing programs.
8393 configure.texi: added documentation for -program_prefix,
8394 -program_suffix and -program_transform_name.
8398 * config.sub: Accept i486 where i386 ok.
8402 * config.sub: accept we32k
8406 * config.sub, configure.in: accept OSE68000 and OSE68k.
8408 * Makefile.in: don't create all directories for ``make install'';
8409 let the subdirectories create the ones they need.
8411 Tue Aug 11 23:13:17 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8413 * COPYING: new file, GPL v2
8415 Tue Aug 4 01:12:43 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8417 * Makefile.in: use the new gen-info-dir, which needs a template
8418 argument (which also lives in texinfo)
8420 * configure.texi, standards.texi: fix INFO-DIR-ENTRY
8422 Mon Aug 3 15:41:28 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8424 * config/mh-solaris: removed the -xs from CFLAGS (let the people
8425 with Sun's C compiler deal with it themselved)
8429 * config.sub (ncr3000): Change i386 to i486.
8431 Thu Jul 23 00:12:17 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8433 * Makefile.in: add install-rcs, install-grep to
8434 install-no-fixedincludes, removed install-bison and install-libgcc
8438 * configure.in: grab the HPUX makefile fragment if on HPUX
8442 * Makefile.in: eradicate bison spoor (ditto libgcc).
8443 configure.in: recognise m68{k,000}-ericsson-OSE.
8444 es1800 is alias for m68k-ericsson-OSE
8446 Sun Jul 19 17:49:02 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8448 * configure.in: rearrange the parts that remove programs from
8449 configdirs, based now on HOST==TARGET or by canonical triple.
8453 * test-build.mk: recurse explicitly with -f test-build.mk when
8454 appropriate. predicate stage3 and comparison on the existence
8455 of gcc. That is, if gcc isn't around, we aren't three-staging.
8456 On very clean, also remove ...stamp-co. Build in-place before
8461 * Makefile.in, configure.in: add tgas
8465 * Makefile.in: a number of changes merged in from progressive.
8467 * configure.in: add libm.
8469 * .cvsignore: ignore some stuff that comes from test-build.mk.
8471 Wed Jul 8 00:01:30 1992 Stu Grossman (grossman at cygnus.com)
8473 * config/mh-solaris: Use -xs when compiling so that Sun-C puts
8474 a symbol-table into the executable.
8478 * config.sub: Add es1800 (m68k-ericsson-es1800).
8482 * configure: Add program_suffix (parallel to program_prefix)
8483 * Makefile.in: adjust directory-creating script for losing decstation
8487 * configure: Minor $subdir-related fixes.
8491 * configure: fix various problems with propogating
8492 makefile_target_frag in subdirs.
8493 * configure.in: config libgcc if its there
8495 Fri Jun 19 15:19:40 1992 Stu Grossman (grossman at cygnus.com)
8497 * config.sub: HPPA merge.
8501 * config/mh-ncr3000 (INSTALL): Don't use /usr/ucb/install,
8502 it is broken on ncr 3000's.
8504 Sun Jun 14 10:29:19 1992 John Gilmore (gnu at cygnus.com)
8506 * Makefile.in: Replace all-bison with all-byacc in all
8507 dependency lines for other tools (which now use byacc).
8509 Fri Jun 12 22:21:57 1992 John Gilmore (gnu at cygnus.com)
8511 * config.sub: Add sun4sol2 => sparc-sun-solaris2.
8513 Tue Jun 9 17:18:11 1992 Fred Fish (fnf at cygnus.com)
8515 * config/{mh-ncr3000, mh-sysv4}: Add INSTALL.
8519 * Makefile.in: make gprof rules similar to byacc rules (instead of
8520 vestigal $(unsubdir) that didn't work...)
8524 * config.sub: Add support for Linux.
8525 * Makefile.in: Use $(FLAGS_TO_PASS) more consistently
8526 (at least for libg++).
8530 * configure.texi: fix doc for the -nfp option to configure
8534 * Makefile.in (all-binutils): ar needs flex, so depend on all-flex.
8536 Sun May 31 15:04:08 1992 Mark Eichin (eichin at cygnus.com)
8538 * config.sub: changed [^-]+ to [^-][^-]* so that it works under
8539 Sun sed. (BSD 4.3 sed doesn't handle [^-]+ either.)
8540 * configure.in: added solaris* host_makefile_frag hook.
8542 Sun May 31 01:10:34 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8544 * config.sub: changed recognition of m68000 so that various
8545 m68k types can be specified via m680[01234]0
8547 Sat May 30 21:01:06 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8549 * config.sub (basic_machine): fix sed so that '-foo' isn't
8550 completely substituted out while .+'-foo' loses the '-foo'
8554 * config.sub ($os): Add -aout.
8558 * configure: If host_makefile_frag is absolute, don't
8559 prefix ${invsubdir} (relevant to libg++ auto-configure).
8563 * Makefile.in (tooldir): Define it.
8564 (all-ld): Depend on all-flex.
8568 * Makefile.in (check): Fix libg++ special case.
8572 * configure: do not bury `pwd` into config.status, thus do fewer
8575 * configure: print the "Building in" message only when building in
8576 other than "." AND verbose.
8578 * configure: remove -s, rework -v to better accomodate guested
8581 * standards.texi: updated to 3 may, fixed librid <-> libdir typo.
8585 * Makefile.in: macroize flags passed on recursion. remove
8590 * configure: get makesrcdir right for subdirs deeper than 1.
8592 * Makefile.in: pass INSTALL, INSTALL_DATA, INSTALL_PROGRAM on
8597 * Makefile.in: don't print subdir_do or recursion lines.
8601 * standards.texi: added menu item.
8603 * Makefile.in: build and install standards.info.
8605 * standards.texi: new file.
8609 * configure: test for and move config.status pieces from
8614 * config/mh-delta88, config/mh-ncr3000: Replace MINUS_G with
8615 CFLAGS per new configuration strategy.
8616 * configure: Test for existance of files before trying to mv
8617 them, to avoid numerous non-existance messages.
8621 * configure: correct final line of config.status.
8623 * configure: patch from eggert. Avoids a protection problem if
8624 the original Makefile.in is read only.
8626 * configure: use move-if-change from gcc to create config.status.
8627 Some makefiles depend on config.status to tell if a directory
8628 has been reconfigured for a different host. This change
8629 prevents those directories from remaking everything in the case
8630 where the reconfig was only intended to rebuild a Makefile.
8632 * configure: test for config.sub with "config.sub sun4" rather
8633 than "config.sub ${host_alias}". Otherwise we can't tell a bad
8634 host alias from a missing config.sub.
8638 * Makefile.in: explicitly pass CFLAGS on recursion. no longer pass
8639 MINUS_G (this can be done with CFLAGS). Default CFLAGS to -g.
8643 * configure: mkdir ${subdir} as needed.
8647 * Makefile.in,configure.in: added autoconf.
8651 * Makefile.in: no longer pass against on recursion.
8653 * Makefile.in: added .NOEXPORT: so that stray makefile_frag
8654 definitions are not inherited.
8656 * configure: correct makesrcdir when subdir is .
8660 * configure: Add support for 'subdirs' variable, which is
8661 like 'configdirs', except that configure doesn't re-invoke
8662 itself for subdirs, it just creates a Makefile for each subdir.
8663 * configure.texi: Document subdirs.
8665 Mon Apr 13 18:50:16 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8667 * configure.in: added flex to configdirs
8671 * Makefile.in: remove clean-stamps from clean.
8673 Sat Apr 11 03:52:03 1992 John Gilmore (gnu at cygnus.com)
8675 * configure.in: Add gdbtest to configdirs.
8679 * Makefile.in (MINUS_G): Add macro, default to -g, pass on
8681 * configure.in: Recognize new ncr3000 config.
8685 * Makefile.in, configure.in: removed references to gdbm.
8689 * config.sub: Don't canonicalize os value
8690 newsos* to bsd (readline needs to check for newsos).
8691 (This fix was earlier made Jan 31, but got re-broken.)
8693 Mon Apr 6 14:34:08 1992 Stu Grossman (grossman at cygnus.com)
8695 * configure.in: sco is an os, not a vendor!
8697 * configure: Quote $( better. Keep various shells happy.
8701 * Makefile.in: eliminate stamp-files.
8705 * Makefile.in: add send_pr. remove "force" from .stmp-gprof rule.
8706 Supress echoing of all the "if [ -d ... $(MAKE)" lines.
8710 * config.sub: fix iris/iris3.
8714 * configure: re-add -rm.
8718 * Maskefile.in: add .stmp-rcs to all.
8720 * configure.in: remove gas from rs6000 build, use aix host fragment.
8724 * configure: pass down site_option during recursion.
8726 Thu Mar 19 16:49:36 1992 Stu Grossman (grossman at cygnus.com)
8728 * Makefile.in (all.cross): Add .stmp-bfd .stmp-readline.
8732 * configure: Change exec_prefix so that it really defaults to prefix.
8736 * Makefile.in, configure.in: Add support for mmalloc library.
8740 * Makefile.in: add stmp dependencies for a few more things.
8744 * configure: adjusted error message on objdir/srcdir configure
8745 collision, per john's suggestion.
8747 * Makefile.in: add libiberty stmp to all and all.cross.
8751 * Makefile.in: remove force dependencies, add grep to all.
8755 * Makefile.in: drop flex. make stamp files work.
8757 * configure: added test for conflicting configuration in srcdir,
8758 remove trailing slashes from srcdir. Otherwise emacs gdb mode
8759 gets cranky. use relative paths for configure and srcdir
8760 whenever possible. Send some error messages to stderr that were
8765 * Makefile.in: Fix libg++ rule to check for gcc directory
8766 before using gcc/gcc. Also pass XTRAFLAGS.
8768 Thu Mar 5 21:45:07 1992 K. Richard Pixley (rich@sendai)
8770 * Makefile.in: added stmp-files so that directories aren't polled
8771 when they are already built.
8773 * configure.texi: fixed a node pointer problem.
8775 Thu Mar 5 12:05:58 1992 Stu Grossman (grossman at cygnus.com)
8777 * config.sub configure.in config/mh-irix4 gdb/configure.in
8778 gdb/mips-tdep.c gdb/mipsread.c gdb/procfs.c gdb/signame.h
8779 gdb/tm-irix3.h gdb/tm-mips.h gdb/xm-irix4.h gdb/config/mt-irix3
8780 gdb/config/mh-irix4 texinfo/configure.in: Port to SGI Irix-4.x.
8784 * configure: -recurring becomes -silent. corrected help message
8787 * Makefile.in: mkdir $(exec_prefix) and $(tooldir).
8791 * configure: when building Makefile for crosses, replace
8792 tooldir and program_prefix. default srcdir from location of
8793 config.sub. remove "for host in hosts" and "for target in
8798 * Makefile.in: Do not pass bindir or mandir to cvs.
8802 * Makefile.in, configure.in: removed traces of namesubdir,
8803 -subdirs, $(subdir), $(unsubdir), some rcs triggers. Forced
8804 copyrights to '92, changed some from Cygnus to FSF.
8806 * configure.texi: remove most references to multiple hosts,
8807 multiple targets, subdirs, etc.
8809 * configure.man: removed rcsid. reference config.sub not
8812 * Makefile.in: mkdir $(infodir) on install-info.
8814 Wed Feb 19 15:41:13 1992 John Gilmore (gnu at cygnus.com)
8816 * configure.texi: Explain better about .gdbinit and about
8817 the environment that configure.in sections run in.
8819 Fri Feb 7 07:55:00 1992 John Gilmore (gnu at cygnus.com)
8821 * configure.in: Ultrix is only a decstation if it's a MIPS.
8823 Fri Jan 31 21:54:51 1992 John Gilmore (gnu at cygnus.com)
8825 * README: DOC.configure => cfg-paper.texi.
8827 Fri Jan 31 21:48:18 1992 Stu Grossman (grossman at cygnus.com)
8829 * config.sub (near case $os): Don't convert newsos* to bsd!
8831 Fri Jan 31 02:27:32 1992 John Gilmore (gnu at cygnus.com)
8833 * Makefile.in: Reinstall change from gdb-4.3 that reduces
8834 the number of copies of COPYING that go into the GDB tar file.
8836 Thu Jan 30 16:17:30 1992 Stu Grossman (grossman at cygnus.com)
8838 * bfd/configure.in, config/mh-sco, gdb/config/mh-i386sco,
8839 gdb/config/mt-i386v32, gdb/configure.in, readline/configure.in:
8840 Fix SCO configuration stuff.
8842 Tue Jan 28 23:51:07 1992 Per Bothner (bothner at cygnus.com)
8844 * Makefile.in: For libg++, make sure the -I pointing
8845 to the gcc directory goes *after* all the libg++-local -I flags.
8846 Also, move just-gcc dependency from just-libg++ to all-libg++.
8848 Tue Jan 28 12:56:24 1992 Stu Grossman (grossman at cygnus.com)
8850 * configure: Change -x to -f to keep Ultrix /bin/test happy.
8852 Sat Jan 18 17:45:11 1992 Stu Grossman (grossman at cygnus.com)
8854 * Makefile.in (make-gdb.tar.Z): Remove texinfo targets.
8856 Sat Jan 18 17:03:21 1992 Fred Fish (fnf at cygnus.com)
8858 * config.sub: Add stratus configuration frags. Also
8861 Sat Jan 18 15:35:29 1992 Stu Grossman (grossman at cygnus.com)
8863 * Makefile.in (DEV_SUPPORT): add configure.man.
8865 * config.sub(Decode manufacturer-specific): add -none*.
8867 Fri Jan 17 17:58:05 1992 Stu Grossman (grossman at cygnus.com)
8869 * Makefile.in: remove form feeds to make Sun's make happy.
8870 (DEVO_SUPPORT): DOC.configure => cfg-paper.texi.
8872 Sat Jan 4 16:11:44 1992 John Gilmore (gnu at cygnus.com)
8874 * Makefile.in (AR_FLAGS): Make quieter.
8876 Thu Jan 2 22:57:12 1992 John Gilmore (gnu at cygnus.com)
8878 * configure.in: Add libg++.
8879 * configure: When verbose, don't output the command line at each
8880 level; it will be unremarkably the same as the previous version,
8881 which will be the same as what the user typed.
8883 Fri Dec 27 16:26:47 1991 K. Richard Pixley (rich at cygnus.com)
8885 * configure.in, Makefile.in: fix clean-info, add flex. add
8888 * configure: be less sensitive to spaces in Makefile.in. Do not
8889 look for sources in "..". Doing so breaks subdirectories that
8890 might have their own configure. If a subdir has it's own
8891 configure script, use it.
8893 Thu Dec 26 16:30:26 1991 K. Richard Pixley (rich at cygnus.com)
8895 * cfg-paper.texi: some changes suggested by rms.
8897 Thu Dec 26 10:13:36 1991 Fred Fish (fnf at cygnus.com)
8899 * config.sub: Merge in some small additions from the FSF version,
8900 taken from the gcc distribution, to bring the Cygnus and FSF
8901 versions into closer sync.
8903 Fri Dec 20 11:34:18 1991 Fred Fish (fnf at cygnus.com)
8905 * configure.in: Changed svr4 references to sysv4.
8907 Thu Dec 19 15:54:29 1991 K. Richard Pixley (rich at cygnus.com)
8909 * configure: added -V for version number option.
8911 Wed Dec 18 15:39:34 1991 K. Richard Pixley (rich at cygnus.com)
8913 * DOC.configure, cfg-paper.texi: revised, updated, and texinfo'd.
8914 renamed from DOC.configure to cfg-paper.texi.
8916 Mon Dec 16 23:05:19 1991 K. Richard Pixley (rich at rtl.cygnus.com)
8918 * configure, config.subr, config.sub: config.subr is now
8921 Fri Dec 13 01:17:06 1991 K. Richard Pixley (rich at cygnus.com)
8923 * configure.texi: new file, in progress.
8925 * Makefile.in: build info file and install the man page for
8928 * configure.man: new file, first cut.
8930 * configure: find config.subr again now that configuration "none"
8931 has gone. removed all traces of the -ansi option. removed all
8932 traces of the -languages option.
8934 * config.subr: resync from rms.
8936 1991-12-11 K. Richard Pixley (rich at rtl.cygnus.com)
8938 * configure, config.sub, config.subr: merge config.sub into
8939 config.subr, call the result config.subr, remove config.sub, use
8942 * Makefile.in: revised install for dir.info.
8944 1991-12-10 K. Richard Pixley (rich at rtl.cygnus.com)
8946 * configure.in: add decstation host makefile frag.
8948 * Makefile.in: BISON now bison -y again. also install-gcc on
8949 install. clean-gdbm on clean. infodir belongs in datadir.
8950 Make directories for info install. Build dir.info here then
8953 1991-12-09 K. Richard Pixley (rich at rtl.cygnus.com)
8955 * Makefile.in: fix for bad directory tests.
8957 1991-12-07 K. Richard Pixley (rich at rtl.cygnus.com)
8959 * configure: \{1,2\} appears to be a sysv'ism. Use a different
8960 regexp. -srcdir relative was being handled incorrectly.
8962 * Makefile.in: unwrapped some for loops so that parallel makes
8963 work again and so one can focus one's attention on a particular
8966 1991-12-06 K. Richard Pixley (rich at rtl.cygnus.com)
8968 * configure: added PWD as a stand in for `pwd` (for speed). use
8969 elif wherever possible. make -srcdir work without -objdir.
8970 -objdir= commented out.
8972 1991-12-05 K. Richard Pixley (rich at rtl.cygnus.com)
8974 * configure: +options become --options. -subdirs commented out.
8975 added -host, -datadir. Renamed -destdir to -prefix. Comment in
8976 Makefile now at top of generated Makefile. Removed cvs log
8977 entries. added -srcdir. create .gdbinit only if there is one
8980 * Makefile.in: idestdir and ddestdir go away. Added copyrights
8981 and shift gpl to v2. Added ChangeLog if it didn't exist. docdir
8982 and mandir now keyed off datadir by default.
8984 1991-11-22 K. Richard Pixley (rich at rtl.cygnus.com)
8986 * Freshly created ChangeLog.
8993 version-control: never