All 5.1 obsolete targets are done.

[binutils.git] / gas / ChangeLog-9697

Wed Dec 31 12:29:47 1997  Jeffrey A Law  ([email protected])

        * config/tc-mn10200.c (md_relax_table): Correct branch ranges.

Mon Dec 22 13:06:05 1997  Joel Sherrill  <[email protected]>

        * configure.in (i386*-go32-rtems*): Fix to be the same as
        i[3456]86-go32.
        * configure: Rebuild.

Mon Dec 22 12:54:07 1997  Ian Lance Taylor  <[email protected]>

        * config/tc-mips.c (macro): The 4650 doesn't permit M_LDC1_AB,
        M_SDC1_AB, M_L_DOB, M_L_DAB, M_S_DAB, or M_S_DOB.
        (mips_ip): Always check for FP_D, not just for instructions that
        are not part of the regular ISA.

Thu Dec 18 16:49:28 1997  Richard Henderson  <[email protected]>

        * config/tc-d10v.c (build_insn): Make `number' a long for 64-bit hosts.

Thu Dec 18 16:42:57 1997  Richard Henderson  <[email protected]>

        * config/tc-alpha.c (cpu_types): 21164pc/pca56 does not have CIX.

Wed Dec 17 21:23:07 1997  Jeffrey A Law  ([email protected])

        * expr.c (integer_constant 32bit bignum): Mask off bits outside
        the range we care about.

Wed Dec 17 15:29:03 1997  Michael Meissner  <[email protected]>

        * config/tc-d30v.c (md_shortopts): Add 'n' and 'N' options.
        (exec_type_enum): Enumeration giving all of the exec types.
        (warn_nops): New static variable to give nop warning level.
        ({cur,prev}_mul32_p): New static variable to keep track of whether
        the current/previous instruction is a 32-bit multiply.
        (Optimizing): Make static.
        (NOP{2,_LEFT,_RIGHT}): Macros for word of nops and left/right
        nops.
        (d30v_insert_operand): Delete declaration of unused function.
        (write_2_short): Make exec_type argument enum, not int.
        (parallel_ok): Ditto.
        (check_range): Delete unused variable(s).
        (build_insn): Ditto.
        (find_format): Ditto.
        (md_apply_fix3): Ditto.
        (md_show_usage): Document -n and -N.
        (md_parse_option): Parse -n and -N.
        (write_1_short): If -n, warn about adding a nop.  Use
        NOP_{LEFT,RIGHT}.
        (write_2_short): Use enumeration values instead of hard coded
        integers.  Reset exec_type for default operations.  For explicit
        parallel operations, call parallel_ok to make sure everything is
        ok.  If writing out a parallel operation, and the previous
        instruction was a 32-bit multiply, indicate current instruction
        is.
        (parallel_ok): Allow add/tx ... to be done in parallel with
        another add/tx ... assuming the gpr registers don't overlap.
        (md_assemble): Use exec type enumeration values, not hard coded
        ints.  Check for loads or 16-bit multiplies following in the next
        cycle after a 32-bit multiply.  Add nops if that is the case.
        (do_assemble): Copy prev_mul32_p to cur_mul32_p, and set
        cur_mul32_p if current instruction is a 32-bit multiply.
        (find_format): Change spacing and layout.

Tue Dec 16 16:55:45 1997  Fred Fish  <[email protected]>

        * config/tc-tic80.c (tic80_relax): New static variable.
        (md_longopts): Add new OPTION_RELAX and OPTION_NO_RELAX options.
        (md_parse_option): Handle new relax options.
        (md_show_usage): Document new relax options.
        (find_opcode): Don't use short forms of PC relative branches if
        tic80_relax is set.

Tue Dec 16 15:26:03 1997  Michael Meissner  <[email protected]>

        * config/tc-d30v.c (parallel_ok): Remove non-register bits from
        used/set flag fields.  Make flag vars unsigned long.  Use
        FLAG_A{0,1} for accumulators.  Allow any 2 insns to be done in
        parallel if they use the same conditional flag with reversed
        meaning.  Allow 2 add/sub insns that set the carry or overflow
        flags but do not query them to be done in parallel.  Don't allow 2
        word store operations to be done in parallel with ADDppp or
        SUBppp.  Don't allow loads to be done in parallel with 16 bit
        multiplies.

Tue Dec 16 09:20:43 1997  Nick Clifton  <[email protected]>

        * config/tc-arm.c: Prevent use of interworking support for
        non-COFF targets.

Mon Dec 15 15:20:32 1997  Nick Clifton  <[email protected]>

        * doc/all.texi: Add M32R cpu.

        * doc/as.texinfo: Add documentation of m32r processor.

        * doc/c-m32r.texi: New file, documenting m32r specific features.  

Mon Dec 15 10:32:28 1997  Jeffrey A Law  ([email protected])

        * config/tc-mips.c (mips_ip): Correctly insert 'P' operands into
        the instruction.

Fri Dec 12 11:44:20 1997  Fred Fish  <[email protected]>

        * config/tc-tic80.c (build_insn): Handle instructions that have
        long (32 bit) PC relative offsets.  Fix places that previously
        misused R_MPPCR for 15 bit offsets to use the new R_MPPCR15W type.
        (md_apply_fix): Add case to handle long PC relative offsets.

Fri Dec 12 10:35:01 1997  Nick Clifton  <[email protected]>

        * doc/c-arm.texi (ARM Options): Document support for new ARM
        processor names.

        * config/tc-arm.c (md_parse_option): Add support for new ARM
        processor names.

Thu Dec 11 17:46:50 1997  Richard Henderson  <[email protected]>

        * config/tc-m68k.c (m68k_ip): Don't overwrite opcode table data.
        (insop, m68k_ip): Make `opcode' const so it doesn't happen again.

Fri Dec  5 11:23:59 1997  Nick Clifton  <[email protected]>

        * config/tc-v850.c (md_assemble): Fix BFD_RELOC_32 against a
        symbol + offset.

        * config/tc-v850.h (ELF_TC_SPECIAL_SECTIONS): Use
        SHT_V850_{S|T|Z}COMMON to mark special common sections.

Tue Dec  2 17:05:13 1997  Nick Clifton  <[email protected]>

        * config/tc-v850.c: Brought up to date with the branch.

Mon Dec  1 20:24:18 1997  J"orn Rennecke <[email protected]>

        * config/tc-sh.c (SWITCH_TABLE_CONS): Handle (fix)->fx_size == 1.
        (SWITCH_TABLE): Handle BFD_RELOC_8.
        (md_apply_fix): #ifndef BFD_ASSEMBLER code: Handle fixP->fx_size == 1.
        (coff_reloc_map): Add BFD_RELOC_8_PCREL entry.
        (sh_coff_reloc_mangle): SWITCH_TABLE case: Handle BFD_RELOC_8.

Sat Nov 22 16:19:22 1997  Richard Henderson  <[email protected]>

        * config/tc-alpha.c (range_signed_16, range_signed_32): Work around an
        apparent bug in gcc's long long support crossing from x86.

Sat Nov 22 14:26:09 1997  Nick Clifton  <[email protected]>

        * config/tc-arm.c: Brought up to date with latest changes on arm
        branch. 

Sat Nov 22 15:50:09 1997  Klaus Kaempf  <[email protected]>

        * config-gas.com: Get version info from configure.in.

        * makefile.vms: include depend.obj in OBJS.

        * config/tc-alpha.c (s_alpha_section): Remove ".lcomm" handling.

        * config/tc-alpha.c (alpha_basereg_clobbered): Remove variable and
        all corresponding code.

Thu Nov 20 15:06:08 1997  Richard Earnshaw <[email protected]>

        * config/tc-arm.h (TARGET_FORMAT for generic a.out targets): Allow
        run-time endian selection.

Wed Nov 19 17:44:42 1997  Richard Henderson  <[email protected]>

        * config/tc-sh.c (parse_reg): Properly quote for fv4.

Wed Nov 19 23:46:18 1997  Ian Lance Taylor  <[email protected]>

        * symbols.c (resolve_symbol_value): Add missing breaks in case on
        symbol value operator.

Tue Nov 18 18:45:14 1997  J"orn Rennecke  <[email protected]>

        * config/tc-d10v.c (parallel_ok, find_opcode): 
        Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.

Sun Nov 16 10:05:07 1997  Fred Fish  <[email protected]>

        * config/obj-coff.c (fixup_segment): Cast second arg of
        md_apply_fix3 call to type "valueT *".

Thu Nov 13 13:53:10 1997  Andrew Cagney  <[email protected]>

        * configure.in (emulations): Make FreeBSD an aout / i386bsd
        variant.
        * configure: Re-generate.
        
Thu Nov 13 11:07:14 1997  Gavin Koch  <[email protected]>

        * config/tc-mips.c (macro_build): Use the membership field
        for INSN_MACRO's.
        (mips_ip): Same.

Thu Nov 13 02:04:55 1997  J"orn Rennecke  <[email protected]>

        * config/tc-d10v.c (find_opcode): For OPCODE_FAKE, add check for
        first argument if it's supposed to be a register.

Tue Nov 11 19:25:05 1997  J"orn Rennecke  <[email protected]>

        * app.c (do_scrub_chars):  If d10v, re-insert a space before
        a '#' when in state 10.

Tue Nov 11 13:33:15 1997  Ian Lance Taylor  <[email protected]>

        * config/tc-h8300.c: Include "subsegs.h".
        (tc_reloc_mangle): Handle references to symbols which are not
        being output, so that references to `.' work.

Mon Nov 10 13:43:33 1997  Ian Lance Taylor  <[email protected]>

        * config/tc-m68k.c (m68k_ip): Call add_fix when needed for '_'
        case.

        * macro.c (sub_actual): If we don't find a parameter for an &,
        just substitute &.

Fri Nov  7 21:29:32 1997  Ken Raeburn  <[email protected]>

        * config/tc-mips.c (mips_ip): In default case, call as_bad
        instead of fprintf, to get "assembler messages:" message output
        before instead of after.

Fri Nov  7 10:36:22 1997  Doug Evans  <[email protected]>

        * frags.h: Handle multiple inclusion.

Wed Nov  5 10:51:49 1997  Doug Evans  <[email protected]>

        Based on a patch from [email protected].
        * as.h (struct frag, frag support): Moved from here.
        * frags.h: To here.
        (struct frag, member tc_frag_data): New member if TC_FRAG_TYPE
        is defined.
        (struct frag, member fr_cgen): Renamed from fr_targ.cgen.
        * cgen.c (cgen_asm_finish_insn): Update.
        * config/tc-m32r.c (md_estimate_size_before_relax): Update.
        * config/tc-m32r.h (TC_FRAG_INIT): Renamed from md_init_frag.
        (md_convert_frag): Ditto.
        * config/tc-ns32k.h (TC_FRAG_TYPE): Define.
        (frag_opcode_frag,frag_opcode_offset,frag_bsr): Update.
        (TC_FRAG_INIT): Update.

Tue Nov  4 16:35:57 1997  Ian Dall  <[email protected]>

        * write.c (print_fixup): Use TC_FIX_DATA_PRINT (if defined) to
        print out MD fields of fix.
        * frags.c (frag_var, frag_variant): Use TC_FRAG_INIT macro (if
        defined) to initialize MD fields in frag.
        * as.h (struct frag, ns32k support): Rename ns32k to fr_ns32k.
        Delete pcrel_adjust.  Add fr_opcode_fragP, fr_opcode_offset.
        * config/tc-ns32k.h: Add comments. Remove obsolete
        BFD_FAST_SECTION_FILL definition, change prototypes for
        fix_new_ns32k and fix_new_ns32k_exp to add new arguments
        opcode_frag and opcode_offset and remove pcrel_adjust.
        (TC_FIX_TYPE): add opcode_fragP and opcode_offset fields.
        (TC_FIX_DATA_PRINT): new macro to print out TC_FIX_TYPE.
        (TC_FRAG_INIT): new macro to initialize machine dependent field in
        frags.
        (frag_opcode_frag, frag_opcode_offset, frag_bsr): macros to access
        MD fields in frag structure.
        (fix_im_disp, fix_bit_fixP, fix_opcode_frag, fix_opcode_offset,
        fix_bsr): macros to access MD fields in fix structure.
        * config/tc-ns32k.c: Avoid overlength lines. Align comments.  Don't
        use struct opcode_location as these fields are now in the frag
        structure.
        (convert_iif): Call frag_more as it is needed instead
        of trying to allocate for the whole insn. Avoid call of frag_more
        with negative argument.
        (md_pcrel_adjust, md_fix_pcrel_adjust, md_apply_fix,
        md_estimate_size_before_relax, md_pcrel_from,
        tc_aout_fix_to_chars): use accessor macros to get md fields in fix
        and frag structures.
        (fix_new_ns32k, fix_new_ns32k_exp): add new arguments opcode_frag and
        opcode_offset and remove pcrel_adjust.
        (convert_iif, cons_fix_new_ns32k): call fix_new_ns32k,
        fix_new_ns32k_exp with changed arguments.

Mon Nov  3 13:30:17 1997  Gavin Koch  <[email protected]>

        * config/tc-mips.c (md_begin): Reorganize setting of default values so
        that mips_cpu depends on TARGET_CPU, and mips_opts.isa depends on
        mips_cpu.
        (md_parse_option): Remove all code that sets defaults; md_begin
        handles all of this now.

Sun Nov  2 14:46:09 1997  Ian Lance Taylor  <[email protected]>

        * Makefile.am (STAGESTUFF): Change bin_PROGRAMS to
        noinst_PROGRAMS.
        (bootstrap, bootstrap2, bootstrap3): Likewise.
        * Makefile.in: Rebuild.

        * config/tc-ppc.c (ppc_fix_adjustable): Don't adjust relocs in the
        TOC section to be against the csect.

Fri Oct 31 18:19:55 1997  Ken Raeburn  <[email protected]>

        * config/tc-mips.c (validate_mips_insn): New function, checks
        match versus mask bits, and also verifies that all bits to be
        output are actually specified somewhere.
        (md_begin): Call it for 32-bit instructions, instead of doing
        match/mask check here.  In case of failure, print a message, but
        check the rest of the opcode table before exiting.

Thu Oct 30 13:46:20 1997  Nick Clifton  <[email protected]>

        * config/tc-arm.c (md_apply_fix3): Fix thumb ADR pseudo op.  Patch
        from Tony Thompson at ARM: [email protected]

Thu Oct 30 11:11:26 1997  Michael Meissner  <[email protected]>

        * config/tc-d30v.c (build_insn): Allow odd registers for ld2w and
        friends.

Fri Oct 24 15:56:47 1997  Ian Lance Taylor  <[email protected]>

        * config/tc-ppc.c (md_assemble): When handling @l, always sign
        extend if the operand expects a signed value.

        * config/tc-mips.h (LOCAL_LABELS_DOLLAR): Don't define; use
        default which is to permit dollar labels.

Fri Oct 24 11:19:22 1997  Jakub Jelinek  <[email protected]>

        * config/tc-sparc.c (sparc_memory_model): New variable.
        (md_longopts): Add -TSO/-PSO/-RMO options.
        (md_parse_options): Handle them.
        (sparc_elf_final_processing): For 64 ELF, set required
        memory ordering in e_flags. Default to RMO and let the user
        override it through command line.

        * config/tc-sparc.h (elf_tc_final_processing): Add.

Wed Oct 22 17:42:12 1997  Richard Henderson  <[email protected]>

        * config/tc-sparc.c (v9a_asr_table): New variable.
        (sparc_ip): Handle v9a asr's.
        Patch from David Miller <[email protected]>.

Wed Oct 22 17:22:59 1997  Richard Henderson  <[email protected]>

        * config/tc-sparc.h (md_do_align): New macro.
        * config/tc-sparc.c (sparc_handle_align): Handle rs_align_code.
        Patch from Jakub Jelinek <[email protected]>.

Wed Oct 22 12:51:18 1997  Ian Lance Taylor  <[email protected]>

        * config/tc-sh.c (sh_small): New variable.
        (OPTION_SMALL): Define.
        (md_longopts): Add "small".
        (md_parse_option): Handle OPTION_SMALL.
        (md_show_usage): Mention -small.
        * config/tc-sh.h (sh_small): Declare.
        (SUB_SEGMENT_ALIGN): Handle sh_small.
        * config/obj-coff.h (TARGET_FORMAT): Check sh_small in TC_SH
        case.

        * config/tc-mips.c (macro): Correct handling of constant in M_LI_D
        case in little endian mode.

Tue Oct 21 10:20:11 1997  Doug Evans  <[email protected]>

        * config/tc-sparc.c (md_apply_fix3, cases ..._H44, ..._HIX22): Leave
        overflow signalling to linker.

Mon Oct 20 14:54:06 1997  Klaus K"ampf  <[email protected]>

        * makefile.vms: Fix for dec c.

        * config-gas.com: Give explanation for dec c setup in error
        message.

        * config/tc-alpha.c (s_alpha_comm): Make .comm symbols separate
        sections on openvms/alpha.

        * config/obj-evax.c: support .weak pseudo-op

Mon Oct 20 10:13:32 1997  Doug Evans  <[email protected]>

        * config/tc-sparc.c (default_arch_size): New static local.
        (struct sparc_arch): Rename arch_size to default_arch_size.
        New member user_option_p.
        (sparc_arch_table): Always include v9, v9a.  New entry v9-64.
        (init_default_arch): Check whether default arch is valid.
        Set default_arch_size in addition to sparc_arch_size.
        (OPTION_32,OPTION_64): Define.
        (md_longopts): New entries for -32, -64.
        (md_parse_option): Handle them.
        (md_show_usage): Print them.  Ensure init_default_arch called.
        * configure.in (sparc64): Set arch to v9-64.
        * configure: Regenerated.

Sun Oct 19 13:50:50 1997  Ian Lance Taylor  <[email protected]>

        * write.c (subsegs_finish): New function, broken out of
        write_object_file.
        (write_object_file): Some code moves into subsegs_finish.
        * write.c (subsegs_finish): Declare.
        * as.c (main): Call subsegs_finish.

        * read.c (s_include): Check for error return from
        demand_copy_string.

Tue Oct 14 20:50:58 1997  Richard Henderson  <[email protected]>

        * read.c (get_line_sb): Accept any eol marker while scanning macros.

Tue Oct 14 19:12:45 1997  Richard Henderson  <[email protected]>

        * config/tc-alpha.h (DIFF_EXPR_OK): Define.
        * config/tc-i386.h (DIFF_EXPR_OK): Define.
        * config/tc-alpha.c (md_apply_fix): Notice fx_pcrel and substitute
        the correct relocation when it exists.
        * config/tc-i386.c (md_apply_fix3): Likewise.

        * config/tc-ppc.h: Correct typo in comment.
        * config/tc-v850.h: Likewise.

Fri Oct 10 16:09:35 1997  Andrew Cagney  <[email protected]>

        * config/tc-d10v.c (parallel_ok): Allow parallel instruction issue
        when second instruction is writing to first instructions inputs.
        
Mon Oct 13 15:27:17 1997  Richard Henderson  <[email protected]>

        * ecoff.c (PAGE_SIZE): Double to 8k as a hack to allow some C++
        templated programs to build with -g.

Fri Oct 10 17:48:29 1997  Nick Clifton  <[email protected]>

        * config/tc-v850.c (md_relax_table): Add support for relaxing
        unconditional branches.  This patch is courtesy of Jim Wilson. 
        (md_convert_frag): Fix relaxing of branches.  This patch is
        courtesy of Jim Wilson.
        (md_assemble): Create different fixups for conditional and
        unconditional branches.  This patch is courtesy of Jim Wilson.
        (md_estimate_size_before_relax): Estimate size of variable part of
        fixup based on whether it is for a conditional or an unconditional
        branch.  This patch is courtesy of Jim Wilson.
        (v850_sdata, v850_tdata, v850_zdata, v850_sbss, v850_tbss,
        v850_zbss, v850_rosdata, v850_rozdata, v850_bss): Add call to
        obj_elf_section_change_hook(). 
        (v850_comm): New function.
        (md_pseudo_table): Add new pseudo ops .zcomm, .scomm and .tcomm.
        (md_begin): Add bss flag to seg_info of bss sections.

        Add support for .scommon, .tcommon and .zcommon sections.

        * config/tc-v850.h (ELF_TC_SPECIAL_SECTIONS): Add .scommon,
        .zcommon, .tbss, .call_table_data and .call_table_text.

Fri Oct 10 15:01:14 1997  Doug Evans  <[email protected]>

        * configure.in (sparc): Set DEFAULT_ARCH from correct target.
        * configure: Regenerated.

Fri Oct 10 11:22:45 1997  Martin M. Hunt  <[email protected]>

        * config/tc-d10v.c: Fixes to make sure the AT_WORD
        expression is not confused with -1.

Fri Oct 10 11:54:50 1997  Andrew Cagney  <[email protected]>

        * config/tc-d10v.c (parallel_ok): Flag SP as modified for @-sp
        operand - OPERAND_ATMINUS.

Fri Oct 10 00:47:44 1997  Michael Meissner  <[email protected]>

        * config/tc-d10v.c (parallel_ok): Note that auto increment and
        decrement modify the index register.

Thu Oct  9 15:17:50 1997  Ian Lance Taylor  <[email protected]>

        From Robin Kirkham <[email protected]>:
        * config/tc-m68k.c (archs): Add 68306, 68307, 68322, 68356, 68334,
        68336, 68341, 68349.
        * doc/c-m68k.texi (M68K-Opts): Add -m68ec000 -m68hc000 -m68hc001
        -m68306, -m68307, -m68322, -m68356, -m68ec020, -m68ec030,
        -m68ec040, -m68ec060, -m68330, -m68334, -m68336, -m68341,
        -m68349.

        * doc/Makefile.am (CPU_DOCS): Define.
        (as.info): Depend upon $(CPU_DOCS).
        * doc/Makefile.in: Rebuild.

        * configure.in: Remove AM_PROG_INSTALL; it's called by
        AM_INIT_AUTOMAKE.
        * configure: Rebuild.

Thu Oct  9 01:44:36 1997  J"orn Rennecke  <[email protected]>

        * config/tc-d10v.h (TC_START_LABEL): Don't define.
        (tc_frob_label): Define.

Thu Oct  9 00:07:23 1997  J"orn Rennecke  <[email protected]>

        * config/tc-d10v.c (write_2_short): Fix bug that wouldn't allow
        to pair a branch and link with anything but an exe instruction.

Wed Oct  8 16:28:53 1997  Richard Henderson  <[email protected]>

        * config/tc-alpha.c (load_expression): Disable the sym+const .got
        optimization to reduce the alignment surprises for gcc.

Wed Oct  8 16:11:15 1997  Doug Evans  <[email protected]>

        * config/obj-coff.h (TC_SPARC): Don't define TARGET_FORMAT.
        * config/tc-sparc.c (sparc_target_format): Handle coff here.
        (sparc_ip): Add %hix,%lox.
        (md_apply_fix3): Call as_bad_where, not as_bad.
        Add support for BFD_RELOC_SPARC_{HIX22,LOX10}.
        (tc_gen_reloc): Add support for BFD_RELOC_SPARC_{HIX22,LOX10}.

Wed Oct  8 12:33:32 1997  Richard Henderson  <[email protected]>

        * configure.in: Change alpha-*-* to alpha*-*-*; config.guess now
        recognizes alphaev5 etc.
        * configure: Rebuild.

Wed Oct  8 00:04:05 1997  Gavin Koch  <[email protected]>

        * config/tc-mips.c (md_begin): Replace the TARGET_CPU value
        of mipsr3900 with mipstx39.

        * config/tc-mips.c (mips_ip): Don't print the 'opcode requires 
        -mipsXX message' if the insn isn't an ISA insn.

Tue Oct  7 12:48:30 1997  Doug Evans  <[email protected]>

        * config/tc-sparc.h (TARGET_FORMAT support): Moved to tc-sparc.c.
        Redefine TARGET_FORMAT to call sparc_target_format.
        * config/tc-sparc.c (in_unsigned_range): New function.
        (sparc_arch_size): Make static.
        (sparc_target_format): New function.
        (sparc_ip): Delete variable immediate_max.  Rewrite %hi/etc reloc
        handling.  Add support for %hh,%hm,%lm,%h44,%m44,%l44.
        (output_insn): Set `fx_no_overflow'.
        (md_apply_fix3): Handle BFD_RELOC_SPARC_{7,H44,M44,L44}.
        (tc_gen_reloc): Likewise.

Mon Oct  6 14:04:50 1997  Nick Clifton  <[email protected]>

        * config/tc-v850.c (v850_section): Remove.

        * config/obj-elf.c (obj_elf_section): Enhance error message.

Fri Oct  3 15:40:38 1997  Ian Lance Taylor  <[email protected]>

        * config/tc-mips.c: Undef OBJ_COPY_SYMBOL_ATTRIBUTES before
        including obj-elf.h in OBJ_MAYBE_ELF case.
        (mips_target_format): Return NULL after abort to avoid warning.

        * ecoff.c (generate_ecoff_stab): Remove unused static function.

        * expr.c (operator): Accept ==.  From Anders Blomdell
        <[email protected]>.

        * config/atof-ieee.c (gen_to_words): When generating a denormal
        number, handle an overflow into the smallest normalized number.

Mon Sep 29 15:24:52 1997  J"orn Rennecke <[email protected]>

        * as.h, input-scrub.c (new_logical_line): New return value.
        * read.c (s_app_file): Don't note the same file several times
        in a row.

Thu Sep 25 13:08:02 1997  Ian Lance Taylor  <[email protected]>

        * config/tc-m68k.c (m68k_ip): Remove ` operand specifier.

Wed Sep 24 16:54:40 1997  Joel Sherrill  <[email protected]>

        * configure.in (sh*-*-rtems*): New target, like sh-*-elf*.
        * configure: Rebuild.

Wed Sep 24 11:30:25 1997  Ian Lance Taylor  <[email protected]>

        * config/tc-m68k.c (m68k_ip): Handle q and v operand specifiers.

        * doc/c-i386.texi (i386-Float): Remove incorrect assertion that
        fn* instructions do not insert implicit fwait.  This was changed
        Jan 29, 1996.

        * config/m68k-parse.y (yylex): Permit an expression to be used for
        the scale factor.

        * Makefile.am (EXTRA_as_new_SOURCES): Set to config/m68k-parse.y,
        not m68k-parse.y.
        * Makefile.in: Rebuild.

        * aclocal.m4: Rebuild with new libtool.
        * configure: Rebuild.

Tue Sep 23 17:48:09 1997  Ian Lance Taylor  <[email protected]>

        * app.c (do_scrub_chars): Clear mri_state at end of .mri
        pseudo-op.

        * config/tc-mips.c (hilo_interlocks): Change from a static
        variable to a macro, so that it varies with the variables upon
        which it depends.
        (gpr_interlocks, cop_interlocks): Likewise.
        (md_begin): Don't initialize them.

Fri Sep 19 17:08:41 1997  Jeffrey A Law  ([email protected])

        * config/tc-mn10300.c (md_assemble): Use strcasecomp instead
        of strcmp where appropriate.

Thu Sep 18 14:11:56 1997  Nick Clifton  <[email protected]>

        * config/tc-v850.c (md_assemble): Cope with a zero data area
        relocation with a constant offset.
        (md_assemble): Produce error message when special data area
        relocations are used on instructions which do not support them.
        (md_assemble): Reset processor mask if defined by command line
        switch. 

Thu Sep 18 11:24:01 1997  Doug Evans  <[email protected]>

        * config/tc-sparc.c: Reorganize file.
        (parse_keyword_arg): Allow numbers in reg names.
        (SPECIAL_CASE_NONE): New macro.
        (md_assemble): Use it.
        (lookup_arch,init_default_arch): New functions.
        (default_arch,default_init_p,sparc_arch_table): New static locals.
        (sparc_arch_size): New static local.
        (max_architecture): Initialize in init_default_arch.
        (md_parse_options): Call init_default_arch if necessary.
        Rewrite -xarch/-A processing.
        (md_show_usage): Print -A values from sparc_arch_table.
        (md_begin): Call init_default_arch if necessary.
        (sparc_md_end): Handle both 32 and 64 bit environments.
        * config/tc-sparc.h (TARGET_FORMAT): Likewise.
        * acconfig.h (SPARC_V9,SPARC_ARCH64): Delete.
        (DEFAULT_ARCH): Add.
        * config.in: Regenerate.
        * configure.in (sparc): Default DEFAULT_ARCH based on target cpu.
        (SPARC_V9,SPARC_ARCH64): Delete.
        * configure: Regenerate.
        * config/vms-conf.h (SPARC_V9,SPARC_ARCH64): Delete.

Wed Sep 17 16:54:20 1997  Nick Clifton  <[email protected]>

        * config/tc-v850.c (v850_reloc_prefix): Recoded to use CHECK_ ()
        macro. 
        (handle_tdaoff, handle_zdaoff, handle_sdaoff): New functions.

        * config/tc-v850.c (md_assemble): Corrected typo.
        * config/tc-v850.c Add new sections: call_table_data and
        call_table_text.
        (v850_reloc_prefix): Add support for ctoff() relocation prefix. 
        (handle_ctoff): New Function.

        * doc/c-v850.texi (V850 Opcodes): Document call table relocations.

Tue Sep 16 14:18:22 1997  Nick Clifton  <[email protected]>

        * config/tc-v850.c (v850_reloc_prefix): Add support for a 16 bit
        displacement from the tiny data area pointer.

Mon Sep 15 21:28:09 1997  Jeffrey A Law  ([email protected])

        * config/tc-hppa.c (fix_new_hppa): Make declaration match
        definition.

Mon Sep 15 18:33:06 1997  Nick Clifton  <[email protected]>

        * config/tc-v850.c (processor_mask): New variable.
        (set_machine, md_parse_option): Set processor_mask.
        (md_assemble): Check that instruction is available to target
        processor. 

        * config/tc-v850.h (TARGET_PROCESSOR): New constant.

Mon Sep 15 11:28:04 1997  Ken Raeburn  <[email protected]>

        Merge in work from Martin Hunt:

        * config/tc-d30v.c (build_insn): For mvfsys and mvtsys,
        CR is 0 for PSWL and PSWH.

        * config/tc-d30v.c (do_assemble): Don't accept
        illegal condition codes for cmpu instruction.

        * config/tc-d30v.c: Add support for BFD_RELOC_D30V_9_PCREL
        used in d*i instructions.

        * config/tc-d30v.c (check_size): New function.  Check
        relocations for overflows.
        (md_pcrel_from_section): Fix relocations between sections.
        (md_apply_fix3): Use new relocation types for 15 and 21
        bit relocations in the right container. Needed because
        the address of the instruction is not eight-byte aligned
        but the relocations must be.

        * config/tc-d30v.c (md_apply_fix3): Check for overflow.
        (find_format): If ".s" or ".l" are used, don't try
        to compute branch sizes.

        * config/tc-d30v.c (do_assemble): Check for ".s" or
        ".l" extensions to opcode names.
        (find_format): Generate the correct instructions when
        ".s" or ".l" are used.

        * config/tc-d30v.c (build_insn): Check for odd registers
        on instructions that require even registers.

        * config/tc-d30v.h (md_start_line_hook): Define.
        * config/tc-d30v.c (md_start_line_hook): New hook.
        Checks the beginning of each line for a ".".  If it
        finds one, assume a pseudo-op and flush any unwritten
        instructions.

        * config/tc-d30v.c (md_apply_fix3): Fix problem
        with determining when fixups were done.

        * config/tc-d30v.c (build_insn): Fix bug where the numeric
        part of a symbol (for example, "foo+8") was being written
        into the instruction.
        (md_pseudo_table): Change .word to be 32 bits and add
        .hword as 16 bits.

        * config/tc-d30v.c (parallel_ok): Check to see if first
        instruction is a jump.

        * config/tc-d30v.c (parallel_ok): Major code reorganization.

Wed Sep 10 10:07:08 1997  Nick Clifton  <[email protected]>

        * config/tc-v850.c (md_assemble): Corrected spelling mistake.
        * configure.in (emulations): Add v850 emulation.

Tue Sep  9 17:14:33 1997  Doug Evans  <[email protected]>

        * Makefile.am (CPU_TYPES): Add arc.
        (TARGET_CPU_CFILES): Add tc-arc.c.
        (TARGET_CPU_HFILES): Add tc-arc.h.
        (dependencies): Rebuild.
        * Makefile.in: Rebuild.
        * configure.in: Recognize arc-*-elf*.
        * configure: Regenerated.
        * config/tc-arc.[ch]: New files.

Tue Sep  9 10:19:37 1997  Nick Clifton  <[email protected]>

        * doc/c-v850.texi (V850 Opcodes): Document hi0() reloc prefix.
        Correct description of hi() reloc prefix.

        * doc/c-v850.texi (V850 Opcodes): Document new reloc prefix.
        * config/tc-v850.c (v850_reloc_prefix): Add hilo() reloc prefix.
        * config/tc-v850.c (md_assemble): Add support for BFD_RELOC_32.

        * doc/c-v850.texi: Document new pseudo ops and command line
        options.

        * config/tc-v850.c (set_machine): New function.
        * config/tc-v850.c (.v850): New pseudo op.
        * config/tc-v850.c (.v850e): New pseudo op.
        * config/tc-v850.c (.v850ea): New pseudo op.
        

Mon Sep  8 23:08:04 1997  Ian Lance Taylor  <[email protected]>

        Support -alh and -ald for DWARF 1:
        * listing.c (struct list_info_struct): Add debugging field.
        (listing_newline): Initialize the debugging field.  If ELF, if the
        section starts with .debug or .line, set the debugging field in
        the listing structure.
        (debugging_pseudo): Add list parameter.  Change all callers.  If
        the debugging field is set, consider it to be a debugging pseudo.
        If ELF, skip blank lines between debugging lines.
        * read.c (emit_expr): If ELF, look for line numbers.
        (stringer): If ELF, look for file names.

Mon Sep  8 12:33:40 1997  Nick Clifton  <[email protected]>

        * config/tc-v850.c (v850_insert_operand): Only test for overflow
        if there is no insert function.

        * config/tc-v850.h (TARGET_MACHINE): New constant.

        * config/tc-v850.c (v850_insert_operand): Add
        -mwarn_unsigned_overflow. 
        (md_begin): Set BFD machine number based on machine variable.
        (md_parse_option): Add -mv850, -mv850e and -mv850ea options.

Mon Sep  8 11:20:46 1997  Ian Lance Taylor  <[email protected]>

        * as.h: Don't declare alloca if it is a macro.
        * macro.c: Likewise.

Sun Sep  7 00:30:19 1997  Richard Henderson  <[email protected]>

        * config/tc-alpha.c (md_parse_option): Move m[] out to top level and
        rename to cpu_types[].
        (s_alpha_arch): New function.
        (md_pseudo_table): Add "arch".

        * config/tc-alpha.c (md_begin): Merge the two loops through the
        opcode table.
        (s_alpha_proc): Add initial SKIP_WHITESPACE.
        (s_alpha_set): Likewise.  Use get_symbol_end instead local while loop.

Sat Sep  6 19:38:12 1997  Fred Fish  <[email protected]>

        * read.h (s_lcomm_bytes): Add prototype (for real this time).

Thu Sep  4 12:10:01 1997  Ian Lance Taylor  <[email protected]>

        * config/obj-elf.c (elf_frob_symbol): Only set BSF_OBJECT for
        symbols on Irix.

Wed Sep  3 11:21:33 1997  Nick Clifton  <[email protected]>

        * config/tc-v850.c: Remove BFD_RELOC_V850_16_PCREL.

Tue Sep  2 18:32:30 1997  Jeffrey A Law  ([email protected])

        * config/tc-mn10200.c (md_convert_frag): PC relative instructions arex
        relative to the next instruction, not the current instruction.
        (md_assemble): Similarly.

Tue Sep  2 15:58:52 1997  Nick Clifton  <[email protected]>

        * doc/c-v850.texi: Explanations of offsets in SDA/ZDA areas
        correcetd. 

        * config/tc-v850.c: Add support for SDA/TDA/ZDA sections.
        (v850_reloc_prefix): Duplicate code eliminated.  Add code to
        recognise special instructions.
        (md_assemble): Calculation of the size of a fixups corrected.

        * config/tc-v850.h (ELF_TC_SPECIAL_SECTIONS): Add SDA/TDA/ZDA
        sections.       

Tue Sep  2 15:40:56 1997  Andrew Cagney  <[email protected]>

        * config/tc-v850.c (md_assemble): Use opcode->name instead of
        opcode->opcode as the sentinal. Zero is a valid opcode.

Tue Aug 26 16:51:14 1997  Ian Lance Taylor  <[email protected]>

        * doc/as.texinfo (Machine Dependencies): Add v850 to menu.
        * doc/c-v850.texi: Change node name to match other chapter nodes.

Tue Aug 26 09:46:22 1997  Nick Clifton  <[email protected]>

        * doc/c-v850.texi (V850 Opcodes): Correct name for tiny data area
        pointer. 

Tue Aug 26 12:23:25 1997  Ian Lance Taylor  <[email protected]>

        * expr.c (integer_constant): If BFD64, don't make a bignum if the
        number will fit in 64 bits.

        * config/tc-alpha.c (load_expression): Check explicitly for O_big,
        rather than calling abort.

        * as.h: Don't define alloca if __GNUC__.  Just declare it.
        * macro.c: Copy alloca handling from as.h.

        * config/tc-i386.c (i386_align_code): Correct 16 bit noops.  From
        Gabriel Paubert <[email protected]>.

        * config/tc-i386.c (md_assemble): In JumpByte case, when looking
        for a WORD_PREFIX_OPCODE, change it to ADDR_PREFIX_OPCODE if this
        is jcxz or a loop instruction.

Mon Aug 25 16:04:14 1997  Nick Clifton  <[email protected]>

        * config/tc-v850.c (pre_defined_registers): Add 'hp' as alias for
        r2.
        (md_begin): Set up machine architecture and type.

Mon Aug 25 14:25:48 1997  Ian Lance Taylor  <[email protected]>

        * symbols.c (resolve_symbol_value): Store the value back into the
        symbol expression, to handle add or subtract simplification
        correctly.  Handle O_symbol_rva.  Add default case.

        * config/tc-ppc.c (ppc_change_csect): Temporarily lower the
        chunksize while creating the new subsection.
        * as.c (chunksize): Initialize to zero.
        * subsegs.c (subseg_set_rest): Change 5000 to chunksize when
        calling obstack_begin.

Mon Aug 25 11:21:48 1997  Nick Clifton  <[email protected]>

        * config/tc-v850.c (md_assemble): Restore input_line_pointer upon
        exit. 
        
        * config/tc-v850.c (parse_register_list): Support constant
        expressions as register lists.

Mon Aug 25 10:19:34 1997  Nick Clifton  <[email protected]>

        * doc/c-v850.texi: Change the major node to v850 Machine
        Dependencies. 

Fri Aug 22 11:16:14 1997  Nick Clifton  <[email protected]>

        * doc/as.texinfo: Add inclusion of c-v850.texi

        * doc/c-v850.texi: New file.

        * read.c (is_end_of_line): Make NUL character be considered to be
        a line terminator.

Fri Aug 22 10:45:33 1997  Nick Clifton  <[email protected]>

        * config/tc-v850.c (parse_register_list): Add support for curly
        brace syntax.
        (cc_names): Add "e" and "ne" conditions.

Thu Aug 21 11:00:36 1997  Nick Clifton  <[email protected]>

        * app.c (do_scrub_chars): Support a double dash as starting a
        comment that extends to end of line.

Thu Aug 21 10:54:27 1997  Nick Clifton  <[email protected]>

        * config/tc-v850.c (v850_section, v850_bss, v850_offset): New
        functions.
        (md_pseudo_table): New pseudo ops: .bss, .offset, .section

Thu Aug 21 00:59:53 1997  Doug Evans  <[email protected]>

        * config/tc-m32r.c (md_estimate_size_before_relax): Update recorded
        insn when changing to a different instruction.

Wed Aug 20 00:45:20 1997  J"orn Rennecke <[email protected]>

        * config/tc-sh.c (parse_reg, get_specific, build_Mytes): Add SH4
        floating point extensions.
        (parse_reg): parse sgr and dbr.

Tue Aug 19 17:07:34 1997  Nick Clifton  <[email protected]>

        * config/tc-v850.c (system_register_name): Support numbers for
        system register IDs.

Tue Aug 19 08:59:12 1997  Fred Fish  <[email protected]>

        * read.c (s_lcomm_internal): Renamed from s_lcomm, added arg to
        flag when alignment is in bytes instead of power of 2, and code to
        use that flag to convert alignment to bytes.
        (s_lcomm, s_lcomm_bytes):  New helpers that call s_lcomm_internal.
        * read.h (s_lcomm_bytes): Add prototype.
        * config/obj-coff.c (write_object_file): If ALIGNMENT_IN_S_FLAGS is
        defined, write alignment to alignment bits in section header s_flags
        rather than the s_align field.
        * config/obj-coff.h (ALIGNMENT_IN_S_FLAGS): Define for TC_TIC80.
        * config/tc-tic80.c (md_pseudo_table): Use s_lcomm_bytes for bss
        pseudo, instead of s_lcomm which wants a power of two for alignment.

Mon Aug 18 20:42:23 1997  Richard Henderson  <[email protected]>

        * macro.c (check_macro): use alloca instead of xmalloc to plug leak.

Mon Aug 18 20:33:06 1997  Richard Henderson  <[email protected]>

        * as.c (show_usage): Add -am.
        * input-scrub.c (input_scrub_include_sb): Don't add leading \n
        if we've already got one.
        * listing.c (struct list_info_struct): Add line_contents.
        (listing_newline): Put unused argument to work: if non-null, save it...
        (listing_listing): ... and regurgitate during listing instead of line
        from file.
        * listing.h (LISTING_MACEXP): New define.
        (LISTING_NEWLINE): Argument is NULL.
        * read.c (read_a_source_file): If expanding macros, break up input
        lines and pass them to listing_newline.
        * doc/as.texinfo: Document -ac and -am.

        * cond.c (s_ifc): Add missing demand_empty_rest_of_line.

Mon Aug 18 11:26:36 1997  Nick Clifton  <[email protected]>

        * config/tc-v850.c (md_apply_fix3): Add support for new 16 bit PC
        relative reloc.

Mon Aug 18 11:24:21 1997  Nick Clifton  <[email protected]>

        * config/tc-v850.c: Remove support_v850e flag and command line
        option. 
        
        * configure.in (emulations): Add support for v850e target

        * configure (emulations): Add support for v850e target

Mon Aug 18 11:24:21 1997  Nick Clifton  <[email protected]>

        * config/tc-v850.c: Remove support_v850ea flag and command line
        option. 
        
        * configure.in (emulations): Add support for v850ea target

        * configure (emulations): Add support for v850ea target

Fri Aug 15 14:00:13 1997  Ian Lance Taylor  <[email protected]>

        * Makefile.am (check-DEJAGNU): Don't cd into testsuite until after
        setting EXPECT and TCL_LIBRARY.
        * Makefile.in: Rebuild.

        * as.h (enum debug_info_type): Define.
        (debug_type): Declare.
        * as.c (debug_type): New global variable.
        (show_usage): Add --gstabs.
        (parse_args): Handle --gstabs.
        * read.c (generate_asm_lineno): Remove.
        (read_a_source_file): Output stabs debugging if appropriate.
        Change checks of generate_asm_lineno to check debug_type.  Only
        generate ECOFF debugging if ECOFF_DEBUGGING is defined.
        * read.h (generate_asm_lineno): Don't declare.
        (stabs_generate_asm_lineno): Declare.
        * stabs.c (stabs_generate_asm_lineno): New function.
        * ecoff.c (add_file): Use debug_type, not generate_asm_lineno.
        Don't turn off debugging.
        (add_file): Remove old #if 0 code.
        (ecoff_new_file): Set debug_type, not generate_asm_lineno.
        (ecoff_directive_end): Don't generate stabs line symbols.
        (ecoff_generate_asm_lineno): Don't check stabs_seen.  Don't set
        generate_asm_lineno.
        (line_label_cnt): Remove.
        (ecoff_generate_asm_line_stab): Remove.
        * ecoff.h (ecoff_generate_asm_line_stab): Don't declare.
        * doc/as.texinfo, doc/as.1: Document --gstabs.

Wed Aug 13 18:58:56 1997  Nick Clifton  <[email protected]>

        * config/tc-v850.c (md_assemble, md_show_usage, md_parse_option):
        Add support for v850ea instructions.

        * config/tc-v850.c (md_assemble, md_show_usage, md_parse_option):
        Add support for v850e instructions.
        
        * config/tc-v850.c (md_assemble): Fix error recovery to reload
        text of entire opcode. 

Tue Aug 12 10:27:34 1997  Richard Henderson  <[email protected]>

        * doc/internals.texi: Document rs_leb128.

Tue Aug 12 12:17:03 1997  Ian Lance Taylor  <[email protected]>

        * config/tc-m68k.c (m68k_ip): Give an error message for SIZE_BYTE
        in ABSL case, rather than calling abort.

Mon Aug 11 21:48:00 1997  Richard Henderson  <[email protected]>

        * as.h (enum _relax_state): Add rs_leb128.
        * read.c (potable): Add sleb128 and uleb128.
        (sizeof_*leb128, output_*leb128, emit_leb128_expr, s_leb128): New
        functions.
        * read.h: Update prototypes.
        * symbols.c (resolve_symbol_value): Streamline quite a bit.  Return
        the symbol value, add a second FINALIZE argument that prevents 
        changes from being comitted.  Update all callers.
        * write.c (cvt_frag_to_fill, relax_segment): Handle rs_leb128.
        * doc/as.texinfo: Document the new pseudos.

Sun Aug 10 14:51:49 1997  Ian Lance Taylor  <[email protected]>

        * Makefile.am (MOSTLYCLEANFILES): Add site.bak, site.exp, stage,
        stage1, and stage2.
        (DISTCLEANFILES): Define.
        * doc/Makefile.am (DISTCLEANFILES): Define.
        * Makefile.in, doc/Makefile.in: Rebuild.

Wed Aug  6 00:30:30 1997  Ian Lance Taylor  <[email protected]>

        * configure.in: Define TARGET_BYTES_BIG_ENDIAN if endian is set.
        Don't set targ or gas_target.  Define SCO_ELF and
        TARGET_SOLARIS_COMMENT when appropriate.  Don't substitute for
        target_frag.
        * Makefile.am: Remove @target_frag@.
        (INCLUDES): Remove $(INTERNAL_CFLAGS), $(CROSS), $(HDEFINES), and
        $(TDEFINES).
        (dep-am): Mark as phony.
        * acconfig.h: Add TARGET_BYTES_BIG_ENDIAN, TARGET_SOLARIS_COMMENT,
        and SCO_ELF.
        * config/arm-big.mt, config/arm-lit.mt: Remove.
        * config/mips-big.mt, config/mips-lit.mt: Remove.
        * config/ppc-big.mt, config/ppc-lit.mt: Remove.
        * config/ppc-sol.mt: Remove.
        * config/i386coff.mt, config/m68kcoff.mt: Remove.
        * config/m88kcoff.mt: Remove.
        * config/sco5.mt: Remove.
        * configure, config.in, Makefile.in: Rebuild.

        * Makefile.am ($(srcdir)/config/m68k-parse.h): New target, to
        further try to circumvent the .y.h rule.
        * Makefile.in: Rebuild.

Tue Aug  5 12:32:07 1997  Ian Lance Taylor  <[email protected]>

        * Makefile.am: New file, based on old Makefile.in.
        * acinclude.m4: New file, from old aclocal.m4.
        * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.  Remove
        shared library handling; now handled by libtool.  Replace
        AC_CONFIG_HEADER with AM_CONFIG_HEADER.  Call AC_PROG_YACC,
        AC_PROG_LEX, and AC_DECL_YYTEXT.  Call AM_MAINTAINER_MODE,
        AM_CYGWIN32, and AM_EXEEXT.  Don't call CY_CYGWIN32 or CY_EXEEXT.
        * config.in: New file, created by autoheader.
        * conf.in: Remove.
        * acconfig.h: Mention PACKAGE, VERSION, and USING_CGEN.
        * stamp-h.in: New file.
        * as.c (print_version_id): Change GAS_VERSION to VERSION.
        (parse_args): Likewise.
        * config/obj-vms.c: (Write_VMS_MHD_Records): Likewise.
        * doc/Makefile.am: New file, based on old doc/Makefile.in.
        * Makefile.in, doc/Makefile.in: Now built with automake.
        * aclocal.m4: Now built with aclocal.
        * configure: Rebuild.

        * cond.c (s_else): If not listing false conditionals, turn listing
        off in the false branch of the else.

Mon Aug  4 11:28:35 1997  Ian Lance Taylor  <[email protected]>

        * config/tc-mips.c (macro): Fix handling of a double load from a
        symbol plus an offset.

        * ecoff.c (ecoff_build_symbols): Set fMerge to 0 for an FDR which
        has an associated external symbol.

Sun Aug  3 23:23:59 1997  Richard Henderson  <[email protected]>
 
        * config/tc-alpha.c (s_alpha_ucons): New function.
        (md_pseudo_table): Add unaligned data pseudos for DWARF.

Thu Jul 31 15:13:43 1997  Jeffrey A Law  ([email protected])

        * config/tc-v850.c (md_assemble): Ignore the rest of the current
        line if we encounter an error.

        * config/tc-v850.c (md_assemble): Sign extend constants value
        for hi and hi0 expressions.
        (v850_insert_operand): Enable range checking for generic 16bit
        operands.

Tue Jul 29 14:20:43 1997  Jeffrey A Law  ([email protected])

        * config/tc-v850.c (md_assemble): Turn on fx_no_overflow for
        LO16, HI16 and HI16_S relocs.

Mon Jul 28 18:41:41 1997  Rob Savoye  <[email protected]>

        * configure.in: Use CYGWIN and EXEEXT autoconf macro to look for
        win32 dependencies.
        * configure: Regenerated with autoconf 2.12.
        * Makefile.in: Add $(EXEEXT) to all executables.

Fri Jul 25 10:54:43 1997  Jeffrey A Law  ([email protected])

        * config/tc-hppa.c (md_apply_fix): Improve warnings for out of range
        unconditional branches.
        (hppa_fix_adjustable): Don't adjust anything with a RR% or LR%
        field selector.

Thu Jul 24 15:21:49 1997  Doug Evans  <[email protected]>

        * config/tc-sparc.c (md_begin): Cast sparc_opcodes to PTR for hash_insert.

Thu Jul 24 17:51:29 1997  Ian Lance Taylor  <[email protected]>

        * macro.c (define_macro): Make sure the index is in range before
        checking for '('.

Thu Jul 24 12:13:19 1997  Fred Fish  <[email protected]>

        * config/tc-tic80.c (build_insn): Remove "extended" and replace with
        "fx" and "fxfrag".  Add "ffrag".  Change code to initialize and use
        the right f/ffrag and fx/fxfrag pairs since instruction may be split
        across frags.

Tue Jul 22 18:38:56 1997  Robert Hoehne <[email protected]>

        * config/te-go32.h (USE_ALIGN_PTWO): Define.
        * config/tc-i386.c (md_pseudo_table): If USE_ALIGN_PTWO is
        defined, use s_align_ptwo for .align.
        * configure.in (i386-*-msdosdjgpp*): New target.
        (i386-*-go32*): Set em to go32 and targ to coffgo32.
        * configure: Rebuild.

Tue Jul 22 12:41:40 1997  Doug Evans  <[email protected]>

        * config/tc-sparc.c (last_opcode): New static local.
        (md_assemble): Don't issue "FP branch in delay slot" warning if
        the delay slot has been annulled.

Tue Jul 22 13:25:13 1997  Ian Lance Taylor  <[email protected]>

        * config/tc-m68k.c (md_apply_fix_2): Check for PC relative reloc
        code if BFD_ASSEMBLER.

Mon Jul 21 08:57:17 1997  Jeffrey A Law  ([email protected])

        * config/tc-v850.c (system_registers): Fix ordering of registers.

Tue Jul 15 16:29:54 1997  Fred Fish  <[email protected]>

        * config/tc-tic80.c (build_insn): Initialize extended word to zero
        when it will be filled in later by relocation information.

Mon Jul 14 23:10:58 1997  Ian Lance Taylor  <[email protected]>

        * config/tc-mips.c (macro_build): Restore check of fmt argument.
        (mips_ip): Fix ISA checks.

Mon Jul 14 19:30:55 1997  Fred Fish  <[email protected]>

        * config/tc-tic80.c (build_insn): Fix endianness problem with
        O_big operands.

Sun Jul 13 20:43:46 1997  Ian Lance Taylor  <[email protected]>

        * config/tc-mips.c (check_absolute_expr): Change warning to
        error.

Fri Jul 11 10:18:47 1997  Jeffrey A Law  ([email protected])

        * config/tc-mips.c (macro_build): Refine code to check if an
        instruction is available on a particular cpu variant.
        (mips_ip): Likewise.

Mon Jul  7 22:53:08 1997  Ian Lance Taylor  <[email protected]>

        * config/tc-i386.c (tc_i386_fix_adjustable): Change ifndef
        OBJ_AOUT to ifdef OBJ_ELF.
        (md_apply_fix3): When mangling 32 bit PC relative reloc for
        BFD_ASSEMBLER, handle one ELF case for COFF as well, and add a PE
        case.
        * write.c (fixup_segment): Change special case for i386-coff to
        not apply for i386-pe.
        * config/obj-coff.c (coff_adjust_section_syms): Only count fixups
        which were not done.
        (coff_frob_file_after_relocs): Rename from coff_frob_file.
        (coff_format_ops): Initialize frob_file_after_relocs field rather
        than frob_file field.
        * config/obj-coff.h (coff_frob_file): Don't declare.
        (coff_frob_file_after_relocs): Declare.
        (obj_frob_file): Don't define.
        (obj_frob_file_after_relocs): Define.
        * configure.in: Set bfd_gas to yes for i386-*-cygwin32.
        * configure: Rebuild.

Wed Jul  2 12:05:00 1997  Ian Lance Taylor  <[email protected]>

        * config/obj-coff.c (fixup_segment): Never subtract section
        address from PC relative reloc which will be fully resolved.

Tue Jul  1 15:23:07 1997  Jeffrey A Law  ([email protected])

        * ecoff.c (page_type): Renamed from page_t to avoid conflict
        with hpux10 header files.

Mon Jun 30 12:27:28 1997  Ian Lance Taylor  <[email protected]>

        From Jason Merrill <[email protected]>:
        * read.c (do_align): If BFD_ASSEMBLER, only use NOP_OPCODE if
        SEC_CODE is set.
        * config/tc-i386.h (md_maybe_text): Define.
        (md_do_align): Use md_maybe_text.

Fri Jun 27 19:15:27 1997  Michael Meissner  <[email protected]>

        * config/tc-ppc.h (tc_fix_adjustable): Only check for GOT type
        relocations, don't check for symbol being external, weak, etc.

Mon Jun 16 19:12:51 1997  Geoff Keating  <[email protected]>

        * config/tc-ppc.h (tc_fix_adjustable): Don't let the assembler
        calculate relocations to any external symbol, because we might be
        linking a shared object and the symbol might be overriden or moved
        (for instance, moved into a static executable's .bss section).
        (GLOBAL_OFFSET_TABLE_NAME): Delete. This is an i386 wierdness.

        * config/tc-ppc.h (tc_fix_adjustable): GOT-based relocations can't
        be calculated by the assembler.

        * config/tc-ppc.c (md_apply_fix3): Handle @plt or @local branch
        whose destination lies in the same file, by ignoring the @plt or
        @local and aiming the branch at its destination.

Mon Jun 16 13:59:18 1997  H.J. Lu  <[email protected]>

        * symbols.c (copy_symbol_attributes): Copy BSF_OBJECT flag.
        * config/obj-elf.h (OBJ_COPY_SYMBOL_ATTRIBUTES): Copy size
        expression.

        * config/obj-multi.h (OBJ_COPY_SYMBOL_ATTRIBUTES): Define instead
        of obj_copy_symbol_attributes.

Mon Jun 16 12:45:56 1997  Ian Lance Taylor  <[email protected]>

        * config/tc-ppc.c (ppc_insert_operand): In 32 bit mode, with a
        signed operand, sign extend a 32 bit value to the host size.

        * Makefile.in (CFLAGS): Subsitute from configure script.  From
        Jeff Makey <[email protected]>.

        * config/tc-i386.c (i386_operand): Use alloca rather than a fixed
        buffer size to make a copy of the symbol.

        * Makefile.in (OBJS): Put @extra_objects@ on the same line as
        macro.o.

Thu Jun 12 12:16:20 1997  Ian Lance Taylor  <[email protected]>

        * write.c (write_object_file): In non BFD_ASSEMBLER code, as we
        step through the frags calling cvt_frag_to_fill, switch to
        SEG_DATA when we reach data_frag_root.

Tue Jun 10 17:08:34 1997  Jeffrey A Law  ([email protected])

        * config/tc-mn10300.c (md_assemble): Allow an empty register
        list for instructions which use register lists.

Tue Jun 10 11:18:09 1997  H.J. Lu  <[email protected]>

        * config/tc-arm.c (md_apply_fix3): Make temp unsigned long.

        * config/tc-arm.c (arm_adjust_symtab): Only set storage classes if
        OBJ_COFF.

        * config/tc-arm.c: Add prototypes for many static functions.
        (struct asm_opcode ): Add prototypes for parms field.
        (struct thumb_opcode ): Likewise.
        (fp_op2): Remove unused flags parameter.
        (output_inst): Make static.
        (arm_after_pass_hook): Remove unused ignore parameter.
        * config/tc-arm.h (arm_after_pass_hook): Declare.
        (arm_start_line_hook): Declare.
        (arm_frob_label): Declare.

Mon Jun  9 12:55:45 1997  H.J. Lu  <[email protected]>

        * depend.c (wrap_output): new prototype.

Mon Jun  9 12:52:44 1997  Ian Lance Taylor  <[email protected]>

        * config/tc-sh.c (md_apply_fix): Check for overflow.

        * config/tc-m68k.c (md_section_align): If a.out and BFD, force
        section size to be aligned.

Fri Jun  6 17:15:55 1997  Ian Lance Taylor  <[email protected]>

        * config/tc-sh.h (md_cons_align): Define.
        (sh_cons_align): Declare.
        * config/tc-sh.c (md_pseudo_table): Add .uaword and .ualong.
        (sh_no_align_cons): New static variable.
        (s_uacons): New static function.
        (sh_cons_align): New function.
        (sh_handle_align): Warn about misaligned data.
        * doc/c-sh.texi: Document .uaword and .ualong.

Thu Jun  5 15:38:17 1997  Ian Lance Taylor  <[email protected]>

        * macro.c (macro_expand): In MRI mode, treat single quote as a
        separator character when checking for a positional argument.

Tue Jun  3 16:15:13 1997  Nick Clifton  <[email protected]>

        * config/tc-arm.c (md_parse_option): Merge in changes from
        armT-970328-branch.

        * config/tc-arm.h: Merge in changes from armT-970328-branch.

        * configure.in (emulations): Add Thumb architecture support from
        armT-9703-28-branch.

Mon Jun  2 16:25:07 1997  Nick Clifton  <[email protected]>

        * doc/all.texi: Add enabling of ARM documentation.

        * doc/as.texinfo: Add ARM documentation from armT-970328-branch.

Mon Jun  2 11:55:12 1997  Gavin Koch  <[email protected]>

        * config/tc-mips.c: Added r3900 support.

Thu May 29 12:58:26 1997  Ben Pfaff  <[email protected]>

        * as.c: (parse_args) `-t' option requires an argument.

Wed May 28 15:45:07 1997  Nick Clifton  <[email protected]>

        * config/tc-arm.c (md_begin): Change call to
        coff_arm_bfd_set_private_flags() to a call to
        bfd_set_private_flags(). 

Wed May 28 16:17:34 1997  Ian Lance Taylor  <[email protected]>

        * Makefile.in: Rebuild dependencies.

        * config/tc-i386.c (tc_gen_reloc): Don't try to convert the type
        of a BFD_RELOC_RVA reloc.

Wed May 28 10:48:14 1997  Jeffrey A Law  ([email protected])

        * config/tc-hppa.c (tc_fix_adjustable): Reject absolute calls/jumps.
        (hppa_force_relocation): Force a relocation for an absolute
        call/jump.

Mon May 26 13:24:25 1997  Ian Lance Taylor  <[email protected]>

        * doc/as.texinfo: Don't use @value in section names or index
        entries; it confuses texinfo.tex.

Fri May 23 00:09:35 1997  Tom Tromey  <[email protected]>

        * doc/as.texinfo: Updated for -MD option.
        * Makefile.in (CFILES): Added depend.c.
        (OBJS): Added depend.o.
        * as.h (start_dependencies, register_dependency,
        print_dependencies): New declarations.
        * depend.c: New file.
        * as.c (parse_args): Added -MD option.
        (main): Call print_dependencies.
        (show_usage): Added help for -MD.
        * read.c (s_app_file): Call register_dependency.
        (s_include): Call register_dependency when file is found.
        (read_a_source_file): Call register_dependency.

Wed May 21 17:39:28 1997  Ian Lance Taylor  <[email protected]>

        * config/obj-coff.c (symbol_to_chars): If TE_PE, don't add the
        section address to the symbol value.

Tue May 20 11:23:31 1997  Gavin Koch  <[email protected]>

        * config/tc-mips.c (macro_build,mips_ip): Move the INSN_ISA field
        into the new membership field.

Thu May 15 10:00:53 1997  Nick Clifton  <[email protected]>

        * config/tc-arm.c (md_begin): If no cpu type is specified on the
        command line then the ARM7 is now chosen by default when setting
        the BFD machine and architecture.

Wed May 14 09:54:53 1997  Nick Clifton  <[email protected]>

        * config/tc-arm.c (global variables): Added 'uses_apcs_26' flag to
        hold APCS selection.
        (md_begin): Added code to generate flags to be set into the COFF
        header and the calls to the BFD functions to do this.
        (md_parse_option, md_show_usage): Added new command line
        options -mapcs-32, -mapcs-26, -marmv2, -marmv2a, -marmv3,
        -marmv3m, -marmv4, -marmv4t. 

        * config/tc-arm.h (LOCAL_LABEL): Removed the definition of this macro
        as it is never used.

Tue May 13 22:26:14 1997  Jeffrey A Law  ([email protected])

        * config/tc-mn10200.c (md_convert_frag): Prefix temporary
        label name with ".".
        * config/tc-mn10300.c (md_convert_frag): Likewise.

Tue May 13 14:44:39 1997  Ian Lance Taylor  <[email protected]>

        * config/tc-mips.c (set_at): Check for bignum.
        (check_absolute_expr, macro, mips16_macro): Likewise.

Tue May 13 10:45:56 1997  Fred Fish  <[email protected]>

        * config/tc-tic80.c (md_apply_fix): Check PC relative relocations
        for overflow/underflow, only insert lower 15 bits into instruction.

Mon May 12 13:33:08 1997  H.J. Lu  <[email protected]>

        * config/tc-i386.c (pi): Check for RegMMX.

Thu May  8 11:10:15 1997  Ian Lance Taylor  <[email protected]>

        * expr.c (expr): When subtracting values in the same frag,
        subtract X_add_number rather than adding it.

Wed May  7 15:39:48 1997  Ian Lance Taylor  <[email protected]>

        * config/obj-coff.c (write_object_file): Just pass NULL to
        md_do_align, not the address of a char holding NOP_OPCODE.

        * config/tc-mips.c (macro): Handle constants for M_LI_D and
        M_LI_DD.
        (mips_ip): For 'F', 'L', 'f', and 'l', generate a constant rather
        than an address if the floating point value looks sufficiently
        simple.

Tue May  6 12:18:09 1997  Ian Lance Taylor  <[email protected]>

        * config/tc-i386.c (md_section_align): If a.out and BFD, force
        section size to be aligned.

Mon May  5 17:16:55 1997  Ian Lance Taylor  <[email protected]>

        * cond.c: Include "macro.h".
        (struct conditional_frame): Add macro_nest field.
        (initialize_cframe): Initialize macro_nest.
        (cond_finish_check): Add nest parameter.  Change all callers.
        (cond_exit_macro): New function.
        * as.h (cond_finish_check): Update declaration.
        (cond_exit_macro): Declare.
        * input-scrub.c (macro_nest): Make globally visible.
        (input_scrub_next_buffer): Call cond_finish_check.
        * macro.h (macro_nest): Declare.
        * read.c (s_mexit): Call cond_exit_macro.

        * config/tc-i386.h (RegMMX): Define.
        * config/tc-i386.c (pi): Check for all register types.
        (type_names): Add RegMMX.
        (md_assemble): Handle RegMMX.

Wed Apr 30 12:47:00 1997  Manfred Hollstein  <[email protected]>

        * config/obj-coff.c (c_section_symbol): Clear the LOCAL bit #ifdef
        TE_DELTA.

Tue Apr 29 20:23:10 1997  Jim Wilson  <[email protected]>

        * config/tc-mips.c (nopic_need_relax): Add new parameter
        before_relaxing.  Use it when testing ecoff_extern_size.
        (load_address, macro, md_estimate_size_before_relax): Fix all
        callers.

Tue Apr 29 19:54:36 1997  Richard Henderson  <[email protected]>

        * config/obj-elf.c (elf_pseudo_table): Add "subsection".
        (obj_elf_subsection): New static function.

Tue Apr 29 19:52:47 1997  Ian Lance Taylor  <[email protected]>

        * config/obj-coff.c (coff_header_append): Don't reset string_size
        each time through the loop.

Fri Apr 25 14:17:46 1997  H.J. Lu  <[email protected]>

        * Makefile.in (DISTSTUFF): Add itbl-parse.h.

Fri Apr 25 12:03:15 1997  Ian Lance Taylor  <[email protected]>

        * doc/internals.texi (Porting GAS): Correct documentation for
        current configure handling of targ-cpu.h, et. al.
        (CPU backend): Document listing macros.

        * listing.c (data_buffer): Set size based on other listing macros,
        rather than always using 100.
        (data_buffer_size): Remove static variable.
        (calc_hex): Make data_buffer_size a local variable.  Don't leave
        any slop when filling data_buffer.

Mon Apr 21 15:33:19 1997  Ian Lance Taylor  <[email protected]>

        * doc/c-mips.texi: Document .set autoextend.

Sat Apr 19 23:09:25 1997  Niklas Hallqvist  <[email protected]>

        * configure.in (i386-*-openbsd*, m68k-*-openbsd*,
        mips-dec-openbsd*, ppc-*-*bsd*, ns32k-pc532-openbsd*,
        sparc-*-openbsd*): New targets.
        * configure: Rebuild.

Sat Apr 19 22:52:03 1997  Jim Wilson  <[email protected]>

        * config/obj-elf.c (elf_frob_symbol): If TC_MIPS, set BSF_OBJECT
        for all undefined symbols.

Fri Apr 18 13:37:35 1997  Ian Lance Taylor  <[email protected]>

        * config/tc-ppc.c (ppc_fix_adjustable): Handle zero length csects
        correctly.

Fri Apr 18 11:51:35 1997  Niklas Hallqvist  <[email protected]>

        * configure.in (alpha*-*-openbsd*): New target.
        * configure: Rebuild.

Thu Apr 17 13:59:47 1997  Per Fogelstrom  <[email protected]>

        * configure.in (mips-*-openbsd*): New target.
        * configure: Rebuild.

Wed Apr 16 12:31:24 1997  Martin Hunt <[email protected]>

        * config/tc-d30v.c (parallel_ok): Fix parallel checking
        for instructions using conditional execution.

Tue Apr 15 18:11:44 1997  Gavin Koch  <[email protected]>

        * config/tc-mips.c (insn_uses_reg): Correct test for fpr pairs.

Tue Apr 15 13:04:47 1997  Ian Lance Taylor  <[email protected]>

        * Makefile.in (srcroot): Remove.
        (INSTALL): Set to @INSTALL@.
        (INSTALL_XFORM, INSTALL_XFORM1): Remove.
        (all, dvi): Don't set srcroot.
        (install): Depend upon as.new, gasp.new, and installdirs.  Use
        $(program_transform_name) directly, rather than using
        $(INSTALL_XFORM) and $(INSTALL_XFORM1).
        (installdirs): New target.
        * doc/Makefile.in (INSTALL_XFORM1): Remove.
        (install): Depend upon installdirs.  Use $(program_transform_name)
        directly, rather than using $(INSTALL_XFORM) and
        $(INSTALL_XFORM1).
        (installdirs): New target.
        (install-info-as): Run mkinstalldirs.
        (install-info-gasp): Likewise.

Mon Apr 14 11:59:08 1997  Ian Lance Taylor  <[email protected]>

        * Makefile.in (INSTALL): Change install.sh to install-sh.

        * symbols.c (resolve_symbol_value): Check for division by zero.

        From Thomas Graichen <[email protected]>:
        * Makefile.in: Always use $(SHELL) when running move-if-change.
        * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
        * configure: Rebuild.

Thu Apr 10 14:40:00 1997  Doug Evans  <[email protected]>

        * cgen.c (cgen_parse_operand): Renamed from cgen_asm_parse_operand.
        New argument `want'.  Update enum cgen_parse_operand_result values.
        Initialize if CGEN_PARSE_OPERAND_INIT.
        * config/tc-m32r.c (md_begin): Set cgen_parse_operand_fn.
        (md_assemble): Call cgen_asm_init_parse.
        Update call to m32r_cgen_assemble_insn, call as_bad if assembly failed.

Wed Apr  9 11:49:41 1997  Ian Lance Taylor  <[email protected]>

        * config/tc-m68k.c (m68k_ip): Handle #j.

Tue Apr  8 16:37:57 1997  Jeffrey A Law  ([email protected])

        * config/tc-mn10300.c (md_convert_frag): Create fixup at the
        right address for call label:32,regs,imm.

Mon Apr  7 14:58:22 1997  Jeffrey A Law  ([email protected])

        * config/tc-hppa.c (pa_subspace_start): If OBJ_ELF, then always return
        zero.
        * config/tc-hppa.h (tc_frob_symbol): Don't reset the value of the
        symbol for OBJ_ELF anymore.

Mon Apr  7 10:54:59 1997  Doug Evans  <[email protected]>

        * Makefile.in: Regenerate dependencies.
        (TARG_CPU): New variable.
        (cgen.o): Depend on cgen.h, $(TARG_CPU)-opc.h.
        (.dep1): Delete creating of cgen-opc.h.
        (.tcdep): Put proper contents in cgen-opc.h.
        * configure.in (m32r): Delete setting of extra_files, extra_links.
        (AC_OUTPUT): Create cgen-opc.h.
        * configure: Regenerated.

Sat Apr  5 13:19:12 1997  Klaus Kaempf  <[email protected]>

        * makefile.vms: Update to build gasp.exe.

Fri Apr  4 16:10:02 1997  Doug Evans  <[email protected]>

        * write.c (relax_frag): Make non-static.
        * write.h (relax_frag): Add prototype for.
        * config/tc-m32r.h (md_do_align): New arg `max'.
        * config/tc-m32r.c (m32r_do_align): Likewise.
        Update calls to frag_align, frag_align_pattern.
        (fill_insn): Update call to m32r_do_align.
        (m32r_scomm): Update call to frag_align.

        * config/tc-m32r.[ch]: New files.
        * cgen.c: New file.
        * Makefile.in (CPU_TYPES): Add m32r.
        (TARGET_CPU_CFILES): Add tc-m32r.c.
        (TARGET_CPU_HFILES): Add tc-m32r.h.
        (DISTCLEAN_HERE): Add cgen-opc.h.
        (.dep1,.tcdep): Create empty cgen-opc.h.
        (cgen.o): Add dependencies.
        (dependencies): Regenerate.
        * as.h (struct frag): New member fr_targ.
        (fr_pcrel_adjust,fr_bsr): Move into union fr_targ.ns32k.
        * conf.in (USING_CGEN): New macro.
        * configure.in (m32r-*-*): Add entry for.
        Add cgen.o to extra_objects.
        * configure: Regenerate.
        * frags.c (frag_var): fr_pcrel_adjust renamed to
        fr_targ.ns32k.pcrel_adjust.  fr_bsr renamed to fr_targ.ns32k.bsr.
        (frag_variant): Likewise.
        * write.c (relax_frag): Likewise.
        * config/tc-ns32k.c (*): Likewise.

Fri Apr  4 13:26:10 1997  Ian Lance Taylor  <[email protected]>

        * config/tc-hppa.h (TC_EOL_IN_INSN): Check explicitly for '!',
        rather than for any end of line character.

        * config/tc-hppa.c (tc_gen_reloc): If hppa_ren_reloc_type fails,
        call abort (i.e., as_abort) rather than crashing.

        * config/tc-mips.c: Protect uses of STO_MIPS16 with an ifdef of
        OBJ_ELF, rather than of S_GET_OTHER.

        * Makefile.in (DISTCLEAN_HERE): Add site.exp and site.bak.

Thu Apr  3 13:16:18 1997  Ian Lance Taylor  <[email protected]>

        * Makefile.in (VERSION): Set to 2.8.1.

        * Branched binutils 2.8.

Wed Apr  2 12:24:10 1997  Ian Lance Taylor  <[email protected]>

        * COPYING: Update FSF address.

        * config/tc-mips.c (mips16_macro): Handle M_DMUL and M_MUL.

Tue Apr  1 18:29:47 1997  Jim Wilson  <[email protected]>

        * config/tc-mips.c (md_begin): Don't set interlocks for 4100.

Tue Apr  1 16:24:28 1997  Klaus Kaempf  <[email protected]>

        * config-gas.com: Update to handle both vax and alpha.
        * makefile.vms: Update to use config-gas.
        * conf-a-gas.com: Remove file.

Tue Apr  1 16:08:21 1997  Ian Lance Taylor  <[email protected]>

        * Makefile.in: Remove unnecessary itbl-parse.h, ibtl-parse.c, and
        itbl-lex.c dependencies.  Remove rules for itbl-lex.o,
        itbl-parse.o, and itbl-ops.o; just use the normal .c.o rule.

Tue Apr  1 11:25:56 1997  Michael Meissner  <[email protected]>

        * config/tc-tic80.c (line_comment_char): Make '#' start comments
        at the beginning of a line for compatibility with .S files where
        cpp leaves the filename transitions beginning with '#'.

Tue Apr  1 00:07:30 1997  Ian Lance Taylor  <[email protected]>

        * config/tc-m68k.c: Only compile tc_coff_symbol_emit_hook and
        tc_coff_sizemachdep if OBJ_COFF.

Mon Mar 31 23:53:44 1997  H.J. Lu  <[email protected]>

        * config/tc-ppc.c (register_name): Declare.

Mon Mar 31 16:31:04 1997  Joel Sherrill  <[email protected]>

        * configure.in (hppa*-*-rtems*): New target, like hppa-*-*elf*.
        * configure: Rebuild.

Mon Mar 31 14:15:19 1997  Ian Lance Taylor  <[email protected]>

        * config/tc-mips.c (mips_pseudo_table): Add "stabn".
        (mips16_mark_labels): New static function.
        (append_insn): Call mips16_mark_labels.
        (mips_emit_delays): Likewise.
        (s_insn): Likewise.  Don't call mips_clear_insn_labels.
        (s_mips_stab): New static function.

        * configure.in: Use ELF for mips-*-gnu*.
        * configure: Rebuild.

Mon Mar 31 14:01:40 1997  Philippe De Muyter  <[email protected]>

        * config/tc-m68k.h (TARGET_FORMAT): Set to "coff-m68k-sysv" if
        TE_DELTA.

Fri Mar 28 18:03:19 1997  Alan Modra  <[email protected]>

        * configure.in: Add AC_ARG_ENABLE for commonbfdlib.  If it is set,
        set OPCODES_LIB to empty.
        * configure: Rebuild.

Fri Mar 28 15:25:24 1997  H.J. Lu  <[email protected]>

        * configure.in (sparc-*-linux*aout*, sparc-*-linux*): New
        targets.
        * configure: Rebuild.

Fri Mar 28 13:08:33 1997  Ian Lance Taylor  <[email protected]>

        * itbl-parse.y (yyerror): Make static.  Declare.

        From Ralf Baechle <[email protected]>:
        * configure.in: Set emulations for mips-*-linux*-*.
        * configure: Rebuild.

        * config/tc-mips.c (struct mips_set_options): Define.
        (mips_opts): New static variable.
        (mips_isa): Remove.  Now a field in mips_opts.  Change all
        references.
        (mips16, mips16_autoextend, mips_warn_about_macros): Likewise.
        (mips_noreorder, mips_nomove, mips_noat, mips_nobopt): Likewise.
        (struct mips_option_stack): Define.
        (mips_opts_stack): New static variable.
        (s_mipsset): Add support for .set push and .set pop.
        * doc/c-mips.texi: Document .set push and .set pop.

        * config/obj-elf.c (obj_elf_section_change_hook): New function.
        * config/obj-elf.h (obj_elf_section_change_hook): Declare it.
        * config/tc-mips.c (s_change_sec): Call it if OBJ_ELF.

Thu Mar 27 12:23:56 1997  Ian Lance Taylor  <[email protected]>

        * as.c (parse_args): Update copyright date in version message.

        * Makefile.in (clean-here): Remove dependency files.

        * read.c (s_comm): Check S_IS_COMMON as well as S_IS_DEFINED.
        (s_mri_common): Check S_IS_COMMON unconditionally.
        * symbols.c (colon): Check S_IS_COMMON as well as S_IS_DEFINED.
        * config/tc-alpha.c (s_alpha_comm): Likewise.
        * config/tc-mips.c (nopic_need_relax): Likewise.
        * config/tc-ppc.c (ppc_elf_lcomm): Likewise.
        (ppc_pe_comm): Likewise.
        * config/obj-elf.c (obj_elf_common): Likewise.  Set segment of
        common symbol to bfd_com_section_ptr.
        * config/tc-sparc.c (s_common): Likewise.
        (tc_gen_reloc): Likewise.

Thu Mar 27 00:29:46 1997  Martin M. Hunt  <[email protected]>

        * config/tc-d30v.c (md_apply_fix3): Get the relocs right.

Wed Mar 26 13:35:15 1997  H.J. Lu  <[email protected]>

        * config/tc-i386.c (tc_i386_fix_adjustable): Only define if
        BFD_ASSEMBLER.

Wed Mar 26 11:32:51 1997  Ian Lance Taylor  <[email protected]>

        * input-scrub.c (input_scrub_next_buffer): Handle very long input
        lines correctly.

        * listing.c (print_lines): Add lineno parameter.  Change all
        callers.
        (listing_listing): Only call calc_hex for the right line.
        (listing_list): Set the new edict based on the current edict, in
        order to handle listing commands in macros correctly.

        * config/tc-mips.c (insn_uses_reg): Map register numbers in mips16
        instructions.

        * cond.c (cond_finish_check): New function.
        * as.h (cond_finish_check): Declare.
        * as.c (main): Call cond_finish_check.

Tue Mar 25 14:45:54 1997  Martin M. Hunt  <[email protected]>

        * config/tc-d30v.c (md_assemble): If two instructions
        are supposed to be assembled in parallel and the first one is
        long, print an error and stop.
        (md_apply_fix3): Don't calculate absolute relocs.  Just write
        them out.

Mon Mar 24 12:11:18 1997  Ian Lance Taylor  <[email protected]>

        * config/tc-i386.h (iclrKludge): Define.
        * config/tc-i386.c (md_assemble): Handle iclrKludge.

        * config/tc-alpha.h (tc_frob_file_before_adjust): Define if
        OBJ_ECOFF.
        (alpha_frob_file_before_adjust): Declare if OBJ_ECOFF.
        * config/tc-alpha.c (alpha_debug): New static variable.
        (md_parse_option): Set alpha_debug if -g is seen.
        (alpha_frob_file_before_adjust): New function if OBJ_ECOFF.

Sun Mar 23 18:03:31 1997  Martin M. Hunt  <[email protected]>

        * config/tc-d30v.c (build_insn): Enable range-checking code.
        (postfix): Stop at space or comma.
        (md_assemble): Change error message.

Sat Mar 22 13:44:28 1997  Ian Lance Taylor  <[email protected]>

        * Makefile.in: Added automatic dependency building.
        * dep-in.sed: New file.

Fri Mar 21 15:42:37 1997  Ian Lance Taylor  <[email protected]>

        * config/obj-ieee.c (segment_name): Don't define function if this
        is a macro.

        * config/obj-coff.h (DO_STRIP): Don't define.
        * config/tc-h8300.h (DO_STRIP): Don't define.
        * config/tc-h8500.h (DO_STRIP): Don't define.
        * config/tc-w65.h (DO_STRIP): Don't define.
        * config/tc-z8k.h (DO_STRIP): Don't define.

        * symbols.c (colon): Call obj_frob_label if it is defined.
        * config/obj-vms.h (obj_frob_label): Rename from tc_frob_label.

        * configure.in: Don't set files and links.  Don't call
        AC_LINK_FILES.  Substitute te_file.  Create targ-cpu.h,
        obj-format.h, targ-env.h, and itbl-cpu.h in AC_OUTPUT.
        * configure: Rebuild.
        * Makefile.in (TARG_CPU_C): New variable.
        (TARG_CPU_O, TARG_CPU_H): New variables.
        (OBJ_FORMAT_C, OBJ_FORMAT_O, OBJ_FORMAT_H): New variables.
        (TARG_ENV_H, ATOF_TARG_C, ATOF_TARG_O): New variables.
        (SOURCES): Rename from REAL_SOURCES.  Delete old definition.
        (LINKED_SOURCES): Remove.
        (HEADERS): Rename from REAL_HEADERS.  Delete old definition.
        (LINKED_HEADERS): Remove.
        (OBJS): Use $(TARG_CPU_O), etc., rather than targ-cpu.o, etc.
        ($(OBJS)): Depend upon $(TARG_ENV_H), etc., rather than
        targ-cpu.h, etc.
        ($(TARG_CPU_O), $(OBJ_FORMAT_O) $(ATOF_TARG_O)): New targets.
        (targ-cpu.o, obj-format.o, atof-targ.o): Remove targets.
        (itbl-cpu.h): Remove target.
        (DISTCLEAN_HERE): Remove targ-cpu.c, obj-format.c, atof-targ.c,
        atof-targ.h.

Thu Mar 20 19:18:58 1997  Ian Lance Taylor  <[email protected]>

        * doc/as.texinfo (Symbol Names): Don't use obsolete @ctrl macro.

Thu Mar 20 16:49:14 1997  Andreas Schwab  <[email protected]>

        * config/tc-m68k.c (mri_chip): Replace calls to get_symbol_end by
        open coded loop that does not require the name to start with a
        name beginner.

Thu Mar 20 13:42:01 1997  H.J. Lu  <[email protected]>

        * frags.c (frag_var): Change offset parameter to offsetT.
        (frag_variant): Likewise.
        * frags.h (frag_variant, frag_var): Update declarations.
        * config/tc-m68k.c (struct m68k_it): Change foff field to
        offsetT.
        (add_frag): Change off parameter to offsetT.
        * Several files: Add casts to calls to frag_var.

        * Makefile.in (m68k-parse.c): Depend upon itbl-parse.c, to
        serialize a parallel make.
        (itbl-parse.h): Split target out from itbl-parse.c.

Thu Mar 20 12:48:45 1997  Philippe De Muyter  <[email protected]>

        * config/m68k-parse.y (motorola_operand): Allow (zdireg,EXPR).

        * config/te-delta.h (COFF_COMMON_ADDEND): Define.
        * config/obj-coff.c (fixup_segment): Check COFF_COMMON_ADDEND when
        storing the value of a common symbol.

Wed Mar 19 11:37:57 1997  Philippe De Muyter  <[email protected]>

        * config/obj-coff.c (glue_symbols): Unused variable symbolP
        removed.
        (crawl_symbols): Do not modify symbol_rootP and symbol_lastP here;
        that is done by symbol_remove and symbol_insert.

        * config/obj-coff.h (S_IS_LOCAL): Return 0 for a debugging
        symbol.

Wed Mar 19 11:06:29 1997  Ian Lance Taylor  <[email protected]>

        * config/tc-mips.c (load_register): In 32 bit mode, when not
        dealing with a 64 bit number, permit the upper 32 bits to be set
        even if bit 31 is not set.

Tue Mar 18 23:30:14 1997  Ian Lance Taylor  <[email protected]>

        * read.c (potable): Add "equiv".
        (s_set): Handle .equiv based on argument.
        * doc/as.texinfo (Equiv): New node to document .equiv.
        (Err): New node to document .err.

Tue Mar 18 15:50:13 1997  H.J. Lu  <[email protected]>

        * Many files: Add function prototypes.
        * as.c (show_usage, parse_args): Make static.
        * frags.h (frag_alloc): Declare.
        * subsegs.c (subseg_set_rest): Don't declare frag_alloc.
        * symbols.c (dollar_label_instance): Change return type to long.
        * symbols.h (print_symbol_value): Declare.
        (print_expr, print_expr_1, print_symbol_value_1): Declare.
        * write.c (fix_new_exp): Don't declare make_expr_symbol.
        (remove_subsegs, relax_frag): Make static.
        * config/atof-vax.c (atof_vax_sizeof): Change letter to int.
        (what_kind_of_float): Likewise.
        (atof_vax): Make static.  Change what_kind to int.
        (md_atof): Change what_statement_type to int.
        * config/obj-ecoff.h (obj_ecoff_set_ext): Declare.
        * config/tc-alpha.c (vax_md_atof): Declare.
        (md_atof): Don't declare atof_ieee and vax_md_atof.
        * config/tc-i386.c (set_16bit_code_flag): Make static.
        * config/tc-i386.h (tc_i386_fix_adjustable): Declare.
        * config/tc-m68k.c (add_fix): Change width to int.
        (insert_reg): Change regname to const.
        (md_atof): Don't declare atof_ieee.
        (demand_empty_rest_of_line): Don't declare.
        * config/tc-m88k.c (md_atof): Don't declare atof_ieee.
        * config/tc-sparc.c (cmp_reg_entry): Change args to const PTR.
        (parse_keyword_arg): Change lookup_fn to take const arg.
        (md_atof): Don't declare atof_ieee.
        * config/tc-sparc.h: Add ifdef for multiple inclusion.
        (tc_aout_pre_write_hook): Don't declare.

Mon Mar 17 11:21:09 1997  Ian Lance Taylor  <[email protected]>

        * as.h (bfd_alloc_by_size_t): Don't declare.
        * Many files: Use xmalloc rather than bfd_alloc_by_size_t.

Sun Mar 16 13:49:21 1997  Philippe De Muyter <[email protected]>

        * symbols.c (symbol_new): Don't call debug_verify_symchain.
        (symbol_append): Set sy_next and sy_previous when adding a single
        symbol to an empty list.  Call debug_verify_symchain.
        (verify_symbol_chain): Use assert, not know.

Sat Mar 15 20:27:12 1997  Fred Fish  <[email protected]>

        * NEWS: Note BeOS support.
        * configure.in: (ppc-*-beos): New target, use coff as object format.
        * configure: Regenerate with autoconf.
        
Sat Mar 15 19:14:02 1997  Ian Lance Taylor  <[email protected]>

        * config/tc-mips.c (md_apply_fix): Improve error message for out
        of range branch.

        * Makefile.in: Add dependencies on obstack.h where needed.

Fri Mar 14 15:33:38 1997  Ian Lance Taylor  <[email protected]>

        * config/tc-mips.c (md_estimate_size_before_relax): Handle the
        case of a symbol equated to another symbol when using SVR4_PIC.

        * Makefile.in (TARG_CPU_DEP_sparc): Add opcode/sparc.h.

Thu Mar 13 11:20:51 1997  Ian Lance Taylor  <[email protected]>

        * read.c (read_a_source_file): Call LISTING_NEWLINE before
        HANDLE_CONDITIONAL_ASSEMBLY when handling an MRI line label.

        * config/obj-elf.c (obj_elf_data): Call md_flush_pending_output
        and md_elf_section_change_hook if they are defined.
        (obj_elf_text, obj_elf_previous): Likewise.

Wed Mar 12 11:40:20 1997  Ian Lance Taylor  <[email protected]>

        * config/obj-multi.h (struct elf_obj_sy): Define if
        OBJ_MAYBE_ELF.
        (OBJ_SYMFIELD_TYPE): Define as struct elf_obj_sy if
        OBJ_MAYBE_ELF.
        * config/obj-elf.h (struct elf_obj_sy): Don't define if
        OBJ_SYMFIELD_TYPE is defined.

        * doc/as.texinfo (bss): Improve description of .bss section.  In
        ELF or COFF, you are permitted to switch into the section.
        (Comm): Rewrite description of common symbols.
        (Lcomm): Mention that some targets permit a third argument.

Tue Mar 11 01:13:31 1997  Ian Lance Taylor  <[email protected]>

        * config/tc-ppc.c (ppc_elf_lcomm): Don't call S_CLEAR_EXTERNAL.

        * symbols.c (colon): Change type of local to int.  From Alan Modra
        <[email protected]>.

        * config/tc-m88k.c (m88k_do_align): Don't use a special nop
        alignment if a zero fill pattern was explicitly specified.
        * config/tc-sh.c (sh_do_align): Likewise.

        * read.c (equals): Always permit register names to be redefined.

        * config/tc-mips.c (mips_fix_adjustable): Permit a reloc against a
        mips16 symbol to be adjusted if a symbol is being subtracted from
        it.

        From Eric Youngdale <[email protected]>:
        * config/obj-elf.c (obj_elf_symver): Check for duplicate or
        illegal symbol version names.
        (elf_frob_symbol): Check for external default versions.

Sun Mar  9 23:49:12 1997  Ian Lance Taylor  <[email protected]>

        From Eric Youngdale <[email protected]>:
        * config/obj-elf.h (struct elf_obj_sy): Define.
        (OBJ_SYMFIELD_TYPE): Define to elf_obj_sy struct.  Change all
        users.
        * config/obj-elf.c (obj_elf_symver): Just record the name.
        (obj_symbol_new_hook): Initialized versioned_name field.
        (elf_frob_symbol): If there is a versioned_name, either rename the
        symbol, or add an alias with that name.

Thu Mar  6 13:55:32 1997  Jeffrey A Law  ([email protected])

        * config/tc-mn10300.c (md_relax_table): Define.
        (md_convert_frag): Implement.
        (md_assemble): Handle relaxable operands/instructions correctly.
        (md_estimate_size_before_relax): Implement.
        * config/tc-mn10300.h (TC_GENERIC_RELAX_TABLE): Define.

        * config/tc-mn10200.c (md_relax_table): Fix typos.

        * config/tc-mn10300.c (md_assemble): Don't use any MN10300 specific
        relocs anymore.  Tweak fx_offset for pc-relative relocs.

Wed Mar  5 15:46:16 1997  Ian Lance Taylor  <[email protected]>

        * cond.c (s_ifc): Call mri_comment_field and mri_comment_end when
        in MRI mode.

Tue Mar  4 19:34:21 1997  Fred Fish  <[email protected]>

        * config/tc-tic80.c (md_pseudo_table): Add "sect" and "section"
        pseudo-ops.
        * config/tc-tic80.c (md_begin): Declare external variable
        coff_flags and insert an F_AR32WR bit into it.

Tue Mar  4 10:01:04 1997  Ian Lance Taylor  <[email protected]>

        * read.c (equals): Add reassign parameter.  Change all callers.
        * read.h (equals): Update declaration.

Sat Mar  1 01:04:04 1997  Ian Lance Taylor  <[email protected]>

        * config/tc-mips.c (mips16_extended_frag): Don't assume that we
        can rely on the frag address to determine whether a frag is
        earlier or later.

Fri Feb 28 14:40:00 1997  Ian Lance Taylor  <[email protected]>

        * write.h (LOCAL_LABEL): Only define if not BFD_ASSEMBLER.
        (S_LOCAL_NAME): Likewise.
        (FAKE_LABEL_NAME): Define unconditionally.
        * symbols.c (colon): Call bfd_is_local_label, not LOCAL_LABEL, if
        BFD_ASSEMBLER.
        (S_IS_LOCAL): Call bfd_is_local_label_name, not LOCAL_LABEL.
        * config/tc-*.h: Only define LOCAL_LABEL if not BFD_ASSEMBLER.
        Don't define FAKE_LABEL_NAME.
        * config/te-ic960.h: Likewise.
        * config/tc-mips.h (tc_frob_file_before_adjust): Define.
        (mips_frob_file_before_adjust): Declare.
        * config/tc-mips.c (mips_frob_file_before_adjust): New function.
        (mips_local_label): Remove.

        * config/te-sco386.h: Remove; not used.

Thu Feb 27 15:39:16 1997  Fred Fish  <[email protected]>

        * config/tc-tic80 (md_pseudo_table): Add align pseudo op to do
        byte alignment rather than power-of-two alignment that is the
        GAS default.

Thu Feb 27 13:29:04 1997  Ian Lance Taylor  <[email protected]>

        * config/tc-m68k.c (md_assemble): Handle a reloc width of 'W'.

        * gasp.c (hash_add_to_string_table): Correct misspelling in error
        message, and add newline.
        (process_file): Don't process assignments in the label if this is
        a equ or assign pseudo-op.
        (process_pseudo_op): Swap first argument to do_assign for K_ASSIGN
        and K_EQU, to match documentation.

Thu Feb 27 12:00:03 1997  Michael Meissner  <[email protected]>

        * config/obj-coff.c (obj_coff_section): Add 'r' section attribute
        to denote read-only data sections.

Thu Feb 27 00:26:33 1997  Ian Lance Taylor  <[email protected]>

        * config/obj-elf.c (obj_elf_common): Set BSF_OBJECT in flags.
        * config/tc-sparc.c (s_common): Likewise, if BFD_ASSEMBLER.

        * expr.c (operand): Simplify 0b handling.  Don't treat 0b as a
        binary number if the next character is '+' or '-'.

Wed Feb 26 20:47:12 1997  Fred Fish  <[email protected]>

        * config/tc-tic80.c (FLT_CHARS): Change from "dD" to "fF".
        (find_opcode): Match operands that can be floats.
        (build_insn): Handle O_big (float) expressions and build
        correct opcode.

Wed Feb 26 18:19:00 1997  Stan Shebs  <[email protected]>

        * configure.in (mips*-*-lnews*): New target, also make empty
        emulation list for this target.
        * configure: Update.
        * config/tc-mips.c (ECOFF_LITTLE_FORMAT): Define.
        (mips_target_format): Use.
        * config/te-lnews.h: New file.

Wed Feb 26 15:33:46 1997  Fred Fish  <[email protected]>

        * config/tc-tic80.c (find_opcode, build_insn): Changes to match
        operands with :m or :s modifiers and generate the right opcodes
        for them.

Wed Feb 26 11:56:11 1997  Ian Lance Taylor  <[email protected]>

        * Makefile.in (itbl-parse.c itbl-parse.h): Use $(BISON) and
        $(BISONFLAGS), not $(YACC) and $(YACCFLAGS).

Tue Feb 25 22:02:23 1997  Philippe De Muyter  <[email protected]>

        * config/tc-m68k.c (instring): Useless local declaration of
        crack_operand removed.
        * expr.h (expressionS): Changed type of X_op field to operatorT if
        __GNUC__.

Tue Feb 25 13:17:27 1997  Ian Lance Taylor  <[email protected]>

        Based on patches from Robert Lipe <[email protected]>:
        * configure.in: Add i386coff and i386elf to emulation list.
        * configure: Rebuild.
        * as.c (i386coff, i386elf): Declare.
        * obj.h (coff_format_ops): Declare.
        * config/obj-coff.c (OBJ_HEADER): Define.
        (coff_obj_symbol_new_hook): Rename from obj_symbol_new_hook.
        (coff_obj_read_begin_hook): Rename from obj_read_begin_hook.
        (obj_pseudo_table): Add "version".
        (coff_pop_insert): New static function.
        (coff_sec_sym_ok_for_reloc): New static function.
        (no_func): New static function.
        (coff_format_ops): New variable.
        * config/obj-coff.h (coff_obj_symbol_new_hook): Declare.
        (obj_symbol_new_hook): Define.
        (coff_obj_read_begin_hook): Declare.
        (obj_read_begin_hook): Define.
        * config/tc-i386.h (i386_target_format): Declare.
        * config/tc-i386.c: Check OBJ_MAYBE_ELF as well as OBJ_ELF; check
        OUTPUT_FLAVOR when appropriate.
        (i386_target_format): New function.
        * Makefile.in (obj-coff.o): New target.
        (e-i386coff.o, e-i386elf.o): New targets.

        From Stephen Williams <[email protected]>:
        * config/tc-i960.h (TC_SYMFIELD_TYPE): Define if OBJ_COFF.
        (_tc_get_bal_of_call): Don't declare.
        (tc_get_bal_of_call): Declare as function, don't define as macro.
        * config/tc-i960.c (tc_set_bal_of_call): If OBJ_COFF, store balP
        in sy_tc field, not x_balntry field.
        (tc_get_bal_of_call): Rename from _tc_get_bal_of_call.  Change
        return type to symbolS *.  If OBJ_COFF, retrieve value from sy_tc
        field, not x_balntry field.

        * config/obj-elf.c (obj_elf_section): Permit a .note section to
        have the SHF_ALLOC attribute.

        * Makefile.in ($(OBJS)): Don't depend upon $(IT_HDRS).
        (TARG_CPU_DEP_mips): Depend upon $(srcdir)/itbl-ops.h.
        (itbl-lex.o): Depend upon itbl-parse.h.

        * itbl-parse.y (yyerror): Change return type to int.  Change to
        use old style function declaration.

        * Makefile.in (itbl-lex.o): Remove -Wall.
        (itbl-parse.o): Likewise.

        * cond.c (s_ifdef): If we should omit conditionals from listings,
        call listing_list.
        (s_if, s_ifc, s_endif, s_else, s_ifeqs): Likewise.
        * listing.c (list_info_struct): Add EDICT_NOLIST_NEXT.
        (listing_listing): Handle EDICT_NOLIST_NEXT.
        (listing_list): An argument of 2 means EDICT_NOLIST_NEXT.
        * listing.h (LISTING_NOCOND): Define.
        (LISTING_SKIP_COND): Define.
        * as.c (show_usage): Mention c as a suboption of -a.
        (parse_args): Handle c as a suboption of -a.
        * doc/as.texinfo: Document -alc.

Mon Feb 24 23:34:14 1997  Fred Fish  <[email protected]>

        * config/tc-tic80.c (md_apply_fix): Handle R_ABS type fixups.

Mon Feb 24 18:27:43 1997  Eric Youngdale  <[email protected]>

        * doc/as.texinfo: Document .symver.

Mon Feb 24 15:19:57 1997  Martin M. Hunt  <[email protected]>

        * config/tc-d10v.c: Change pre_defined_registers to 
        d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.

Mon Feb 24 10:40:45 1997  Fred Fish  <[email protected]>

        * config/obj-coff.c: Fix typo in comment section.
        * config/tc-tic80.c (md_pseudo_table): Add entry for bss, which takes
        an additional alignment argument.
        (find_opcode): Allow O_symbol relocs for any 32 bit field, not just
        base relative ones.
        (build_insn): Handle O_symbol relocs for any 32 bit field, not just
        base relative ones.

Mon Feb 24 02:23:00 1997  Dawn Perchik  <[email protected]>

        * Makefile.in: Remove dependancies on itbl-cpu.h.
        * as.c: Define stubs for itbl_parse and itbl_init if HAVE_ITBL_CPU 
        is not defined.

Mon Feb 24 02:03:00 1997  Dawn Perchik  <[email protected]>

        * itbl-ops.h: Include as.h.

Mon Feb 24 01:04:00 1997  Dawn Perchik  <[email protected]>

        * as.c: Remove -t option.
        * configure, configure.in: Move itbl-cpu.h to mips specific configure.
        * itbl-ops.h: Include itbl-cpu.h only if HAVE_ITBL_CPU is defined.
        * config/tc-mips.h: Define HAVE_ITBL_CPU.

Sun Feb 23 18:01:00 1997  Dawn Perchik  <[email protected]>

        * itbl-ops.c: Don't define DEBUG.

Sun Feb 23 17:49:00 1997  Dawn Perchik  <[email protected]>

        * Makefile.in: Update itbl-test.c to reflect its new location.

Sun Feb 23 15:50:00 1997  Dawn Perchik  <[email protected]>

        * itbl-ops.c: Add test for itbl_have_entries.
        * config/tc-mips.c: Remove test for itbl_have_entries.
        * config/tc-mips.h: Define tc_init_after_args to mips_init_after_args.

Sun Feb 23 18:13:19 1997  Ian Lance Taylor  <[email protected]>

        * Makefile.in (DISTSTUFF): Remove itbl-parse.y, itbl-lex.l, and
        itbl-ops.c.  Add itbl-parse.c and itbl-lex.c.
        (LEX, LEXFLAGS): Define.
        * itbl-ops.c (append_insns_as_macros): Remove bogus ASSERT.

Sat Feb 22 21:25:00 1997  Dawn Perchik  <[email protected]>

        * itbl-parse.y: Fix indentation mistakes from indent program.
        * itbl-lex.l: Fix indentation mistakes from indent program.
        * itbl-ops.h: Add include for ansidecl.h.
        Add PARAMS around function arguments.
        Add declaration for itbl_have_entries.
        * itbl-ops.c: Add PARAMS around function arguments.
        * Makefile.in: Add itbl build rules.
        Add dependancies for itbl files to mips target.
        * as.c: Add itbl support.
        Add new option "--insttbl" for dynamically extending instruction set.
        * as.h: Declare insttbl_file_name;
        the name of file defining extensions to the basic instruction set 
        * configure.in, configure: Add itbl-parse.o, itbl-lex.o, and 
        itbl-ops.o to extra_objects for mips configuration.
        Add include file link from itbl-cpu.h to 
        config/itbl-${target_cpu_type}.h.
        * config/tc-mips.c: Allow copz instructions.
        Add notes for future additions to the itbl support.
        Add debug macros.
        (macro): Call itbl_assemble to assemble itbl instructions.
        See if an unknown register is specified in an itbl entry.

Sat Feb 22 20:53:01 1997  Fred Fish  <[email protected]>
        * doc/internals.texi (CPU backend): Fix typo in md_section_align
        description.
        * config/tc-tic80.h (NEED_FX_R_TYPE): Define.
        * config/tc-tic80.c (find_opcode): Add code to support O_symbol
        operands.
        (build_insn): Grab a frag early so we can use the address in
        fixups.  Take one's complement of BITNUM values before insertion
        in opcode.  Add code to support O_symbol operands.
        (md_apply_fix): Replace unimplemented warning with implementation.
        (md_pcrel_from): Ditto.
        (tc_coff_fix2rtype): Ditto.

Fri Feb 21 14:34:31 1997  Martin M. Hunt  <[email protected]>

        * config/tc-d30v.c (parallel_ok): New function. 
        * config/tc-d30v.h: Define TARGET_BYTES_BIG_ENDIAN.
        * config/tc-d10v.c (md_pcrel_from_section): Return 0 if
        relocation is in different section.

Fri Feb 21 10:08:25 1997  Jim Wilson  <[email protected]>

        * config/tc-mips.c (mips_ip): If configured for an embedded ELF system,
        don't set the section alignment to 2**4.

Fri Feb 21 11:55:03 1997  Ian Lance Taylor  <[email protected]>

        * config/tc-m68k.c (line_comment_chars): Add '*'.

        * app.c (LEX_IS_TWOCHAR_COMMENT_2ND): Don't define.
        (do_scrub_begin): Don't set lex['*'].
        (do_scrub_chars): When handling LEX_IS_TWOCHAR_COMMENT_1ST, don't
        check for LEX_IS_TWOCHAR_COMMENT_2ND.  Instead, just check for
        a literal '*'.

        * configure.in: Set em=svr4 for m68k-*-sysv4*.
        * configure: Rebuild.
        * config/te-svr4.h: New file.
        * config/tc-m68k.c (m68k_comment_chars): Only include `#' if
        TE_SVR4 or TE_DELTA.

Thu Feb 20 22:24:39 1997  Jeffrey A Law  ([email protected])

        * config/tc-mn10200.c (md_convert_frag): Create a fixup for the
        short conditional branch around a long unconditional branch.

Thu Feb 20 13:56:00 1997  Ian Lance Taylor  <[email protected]>

        * config/obj-coff.c (obj_coff_ln [both versions]): Call
        new_logical_line.

        * config/tc-arm.c (fix_new_arm): Use make_expr_symbol to handle a
        complex expression.

        * symbols.c (resolve_symbol_value): If both left and right
        operands are undefined, warn about both of them.

Wed Feb 19 00:53:28 1997  Ian Lance Taylor  <[email protected]>

        Based on patches from Eric Youngdale <[email protected]>:
        * config/obj-elf.c (elf_pseudo_table): Add "symver".
        (obj_elf_symver): New static function.
        * config/obj-elf.h (OBJ_COPY_SYMBOL_ATTRIBUTES): Copy the st_other
        field.

        * write.c (relax_segment): Make type and printf format agree.

        * read.c (get_line_sb): Don't end the line on a semicolon inside a
        string.

Tue Feb 18 18:42:51 1997  Martin M. Hunt  <[email protected]>

        * config/tc-d30v.c, config/tc-d30v.h: New files.

        * configure: Rebuilt.
        
        * configure.in: Add case for d30v.

Sun Feb 16 17:47:29 1997  Fred Fish  <[email protected]>

        * config/tc-alpha.h (md_operand): Define with a null expansion,
        like all the other targets.
        * doc/internals.texi (CPU backend): Add missing word in 
        md_flush_pending_output description.  Fix typo in md_convert_frag
        description.
        * config/tc-tic80: Minor comment additions/changes.
        
Fri Feb 14 18:09:59 1997  Philippe De Muyter  <[email protected]>

        * config/tc-m68k.c (LOCAL_LABEL): Macro redefined if TE_DELTA.
        (tc_canonicalize_symbol_name): Macro defined if TE_DELTA.
        * config/obj-coff.c (obj_coff_def): Use
        tc_canonicalize_symbol_name if defined.
        (obj_coff_tag, obj_coff_val): Likewise.
        * expr.c (operand): Reject '~' as operator if is_name_beginner.

Fri Feb 14 17:24:48 1997  Ian Lance Taylor  <[email protected]>

        Based on notes from Peter Eriksson <[email protected]>.  The target
        does not actually work, though:
        * configure.in (i386-sequent-bsd*): New target.
        * configure: Rebuild.
        * config/tc-dynix.h: New file.
        * config/tc-i386.h: Define TARGET_FORMAT if TE_DYNIX.

        * read.c (do_align): Add max parameter.  Change all callers.
        Remove useless static variables.
        (s_align): New static function.  Do common portion of
        s_align_bytes and s_align_ptwo.
        (s_align_bytes, s_align_ptwo): Just call s_align.
        * frags.c (frag_align): Add max parameter.  Change all callers.
        (frag_align_pattern): Likewise.
        * frags.h (frag_align, frag_align_pattern): Update declarations.
        * write.c (relax_segment): Limit alignment change to fr_subtype.
        Fix some types to be addressT.
        * config/obj-coff.c (size_section): Likewise.
        * config/obj-ieee.c (size_section): Likewise.
        * config/tc-d10v.h (md_do_align): Add max parameter.
        * config/tc-i386.h (md_do_align): Likewise.
        * config/tc-m88k.h (md_do_align): Likewise.
        * config/tc-m88k.c (m88k_do_align): Likewise.
        * config/tc-sh.h (md_do_align): Likewise.
        * config/tc-sh.c (sh_do_align): Likewise.
        * as.h: Improve comments on rs_align and rs_align_code.
        * doc/as.texinfo: Document new alignment arguments.
        * doc/internals.texi (Frags): Document use of fr_subtype field for
        rs_align and rs_align_code.

Fri Feb 14 15:56:06 1997  Gavin Koch  <[email protected]>

        * config/tc-mips.c: Changed opcode parsing.

Thu Feb 13 20:02:16 1997  Fred Fish  <[email protected]>

        * config/{tc-alpha.h, tc-d10v.h, tc-generic.h, tc-i960.h,
        tc-mn10200.h, tc-mn10300.h, tc-sh.h, tc-vax.h, tc-w65.h}:
        Add default definition of zero for TARGET_BYTES_BIG_ENDIAN.
        * config/{tc-arm.h, tc-hppa.h, tc-i386.h, tc-mips.h, tc-ns32k.h,
        tc-ppc.h, tc-sparc.h}: Move definition of TARGET_BYTES_BIG_ENDIAN
        to a location consistent with the rest of the target include files.
        * config/tc-i386.c: Remove misleading comment.
        * doc/internals.texi (CPU backend): Add description of function
        md_undefined_symbol.
        * config/tc-tic80.c: Add code to insert predefined symbols into the
        symbol table so they can be parsed by the standard expression parser.
        Remove custom code that use to parse them.
        * config/tc-tic80.h: Move definition of TARGET_BYTES_BIG_ENDIAN
        to a location consistent with the rest of the target include files.
        
Thu Feb 13 21:44:18 1997  Klaus Kaempf  <[email protected]>

        * as.h: GNU c provides unlink() function.

        Unify section handling on openVMS/Alpha:
        * config/tc-alpha.c(s_alpha_link): Remove.
        (s_alpha_section): New function.
        Remove case-hacking of symbols
        Add .code_address pseudo-op.
        (BFD_RELOC_ALPHA_CODEADDR): New relocation.
        (s_alpha_code_address): New function.
        (alpha_ctors_section, alpha_dtors_section): New sections for C++
        static constructors/destructors.
        Add debug code for crash debugs, to be removed when traceback code
        is added to object code.
        (s_alpha_name): New function for .name pseudo-op.
        (alpha_print_token): New function to print token expressions with
        alpha specific extensions.

        * makefile.vms: Allow compilation with current gcc snapshot.

Thu Feb 13 16:29:04 1997  Fred Fish  <[email protected]>

        * doc/Makefile.in (TEXI2DVI): Set to just name of program.
        (DVIPS): Set to dvips.
        (ps, as.ps, gasp.ps): New targets.
        (internals.info, gasp.dvi, internals.dvi): Set both TEXINPUTS
        and MAKEINFO env variables.
        (internals.ps): Use DVIPS macro.
        (clean): Remove core and backup files.
        (distclean): Remove temporary files from building internals.
        (clean-dvi): Ditto.
        * doc/internals.texi (Frags): Fix typo.
        (GAS processing): Ditto.
        (CPU backend): Ditto.
        * ecoff.c (init_file): Use TARGET_BYTES_BIG_ENDIAN value directly.
        * mpw-config.in: Define TARGET_BYTES_BIG_ENDIAN as 1.
        * read.c: Remove ugly hack that dealt with config files not
        correctly defining TARGET_BYTES_BIG_ENDIAN.
        (target_big_endian): Use TARGET_BYTES_BIG_ENDIAN directly.
        * config/arm-big.mt: Define TARGET_BYTES_BIG_ENDIAN to 1.
        * config/arm-lit.mt: Define TARGET_BYTES_BIG_ENDIAN to 0.
        * config/mips-big.mt: Define TARGET_BYTES_BIG_ENDIAN to 1.
        * config/mips-lit.mt: Define TARGET_BYTES_BIG_ENDIAN to 0.
        * config/ppc-lit.mt: Define TARGET_BYTES_BIG_ENDIAN to 1.
        * config/ppc-sol.mt: Replace TARGET_BYTES_LITTLE_ENDIAN
        with TARGET_BYTES_BIG_ENDIAN defined to 0.
        * config/tc-arm.h: Remove use of TARGET_BYTES_LITTLE_ENDIAN
        and simplify.  Test value of TARGET_BYTES_BIG_ENDIAN, not just
        whether it is defined or not.
        * config/tc-mips.h: Remove use of TARGET_BYTES_LITTLE_ENDIAN.
        * config/tc-ppc.h: Remove use of TARGET_BYTES_LITTLE_ENDIAN
        and simplify. Test value of TARGET_BYTES_BIG_ENDIAN, not just
        whether it is defined or not.
        * config/tic80.h (TARGET_FORMAT): Define to coff-tic80.
        (TARGET_BYTES_BIG_ENDIAN): Define to 0.

Thu Feb 13 14:40:16 1997  Doug Evans  <[email protected]>

        * write.c (write_relocs): Correct text in as_fatal error message,
        bfd_perform_relocation -> bfd_install_relocation.

Thu Feb 13 14:48:03 1997  Philippe De Muyter  <[email protected]>

        * config/tc-m68k.c (LEX_TILDE): Define if TE_DELTA.
        * read.c (LEX_TILDE): Define if not defined.
        (lex_type): Use LEX_TILDE.
        * expr.c (get_symbol_end): Check first char with is_name_beginner,
        not is_part_of_name.

Thu Feb 13 11:40:58 1997  Ian Lance Taylor  <[email protected]>

        * config/tc-sparc.c (md_show_usage): Add missing backslash at end
        of continued line.

        * config/tc-mips.c (mips16_extended_frag): Correct base address
        for an extended PC relative instruction.
        (md_convert_frag): Likewise.

        * config/tc-mips.c (prev_nop_frag): New static variable.
        (prev_nop_frag_holds): New static variable.
        (prev_nop_frag_required): New static variable.
        (prev_nop_frag_since): New static variable.
        (append_insn): If we aren't reordering, and prev_nop_frag is not
        NULL, and we don't need any nops, then decrease the size of
        prev_nop_frag.  Don't insert nops because of instructions in
        noreorder sections.  Remember whether the previous instructions
        where in noreorder sections even when not reordering.
        (mips_no_prev_insn): Add preserver parameter.  Change all
        callers.  Refer prev_nop_frag variables when appropriate.
        (mips_emit_delays): Set up prev_nop_frag.
        (s_mipsset): Clear prev_nop_frag if reordering.

Wed Feb 12 14:36:29 1997  Ian Lance Taylor  <[email protected]>

        * config/tc-mips.c (append_insn): Remove useless code which
        handled swapping a mips16 jump with a mips16 instruction with a
        reloc.

        * config/tc-mips.c (md_parse_option): When debugging, set
        mips_optimize to 1, not 0.

        * config/tc-mips.c (mips16_ip): Handle an extend operand.

        * config/tc-mips.c (my_getExpression): In mips16 mode, if it looks
        like the expression was based on `.', adjust the value of the
        symbol.

        * config/tc-mips.c (append_insn): Warn about an attempt to put an
        extended instruction in a delay slot when not reordering.
        (md_convert_frag): Warn if an extended instruction appears in a
        delay slot.

        * config/tc-mips.c (mips_pseudo_table): Add "insn".
        (s_insn): New static function.
        * doc/c-mips.texi: Document .insn.

        * config/tc-mips.c (md_begin): Add the general registers to the
        symbol table.
        (mips16_ip): First parse the expression, and then see whether it
        came up with a register, rather than trying to first see whether
        we are looking at a register.

Tue Feb 11 15:13:39 1997  Fred Fish  <[email protected]>

        * config/tc-tic80.c: Numerous changes and additions to flesh
        out functions that were previously just stubs, and fix some
        problems found using the new TIc80 testsuite cases.

Tue Feb 11 15:52:22 1997  Ian Lance Taylor  <[email protected]>

        * config/tc-mips.c (mips16_ip): Handle %gprel modifier.
        (md_apply_fix): Handle BFD_RELOC_MIPS16_GPREL.

        * config/tc-mips.c (append_insn): Output jump instruction as a
        pair of 2 byte instructions, rather than as a single 4 byte
        instruction.

Mon Feb 10 22:06:00 1997  Dawn Perchik  ([email protected])

        * itbl-ops.c, itbl-lex.l, itbl-parse.y, itbl-ops.h,
        config/itbl-mips.h: Add copyright message and fix indentation.

Mon Feb 10 18:09:00 1997  Dawn Perchik  ([email protected])

        * itbl-ops.c: New file.  Add support for dynamically read 
        instruction registers, opcodes and formats.  Build internal table 
        for new instructions and provide callbacks for assembler and 
        disassembler.
        * itbl-lex.l, itbl-parse.y: Lex and yacc parsers for instruction 
        spec table.
        * itbl-ops.h: New file.  Header file for itbl support.
        * config/itbl-mips.h: New file.  Mips specific definitions for
        itbl support.

Fri Feb  7 09:52:34 1997  Jeffrey A Law  ([email protected])

        * config/tc-mn10200.c (md_assemble): If a constant operand won't
        fit into the constant field of a relaxable operand, then it does
        not match.

Thu Feb  6 20:08:12 1997  Jeffrey A Law  ([email protected])

        * config/tc-mn10200.c (md_estimate_size_before_relax): Treat
        a jsr target in a different section just like a jsr to
        an undefined target.

Thu Feb  6 16:52:57 1997  Ian Lance Taylor  <[email protected]>

        * config/tc-mips.c (mips_fix_adjustable): Don't adjust relocations
        against any mips16 symbols, not just externally visible ones.
        (md_apply_fix): Corresponding change.

Wed Feb  5 11:11:06 1997  Ian Lance Taylor  <[email protected]>

        * config/tc-mips.c (mips16_ip): Accept floating point registers in
        the operand of the exit instruction.

Tue Feb  4 14:12:39 1997  Ian Lance Taylor  <[email protected]>

        * symbols.c (resolve_symbol_value): If we leave an equated symbol
        as O_symbol, copy over the segment.

Mon Feb  3 12:35:54 1997  Ian Lance Taylor  <[email protected]>

        * config/tc-mips.c (md_apply_fix): If we aren't adjusting this
        fixup to be against the section symbol, adjust the value
        accordingly.

        * symbols.c (resolve_symbol_value): Don't change X_add_number for
        an equated symbol.
        * write.c (write_relocs): Avoid looping on equated symbols.
        Adjust fx_offset by X_add_number for each symbol.
        * config/obj-coff.c (do_relocs_for): Avoid looping on equated
        symbols.
        (fixup_segment): Add a loop to track down equated symbols and
        adjust fx_offset appropriately.

Fri Jan 31 15:21:02 1997  Jeffrey A Law  ([email protected])

        * config/tc-mn10200.c (md_relax_table): Add entries to allow
        jmp -> bra relaxing.
        (md_convert_frag): Handle jmp->bra relaxing.
        (md_assemble): Handle jmp->bra relaxing.
        (md_estimate_size_before_relax): Likewise.

Fri Jan 31 13:15:05 1997  Alan Modra  <[email protected]>

        * config/tc-i386.c (i386_align_code): Add comments explaining the
        nop instructions.

Fri Jan 31 10:46:14 1997  Ian Lance Taylor  <[email protected]>

        * config/tc-sparc.c (enforce_aligned_data): New static variable.
        (sparc_cons_align): Don't do anything unless enforce_aligned_data
        is set.
        (md_longopts): Add "enforce-aligned-data".
        (md_show_usage): Mention --enforce-aligned-data.
        * doc/c-sparc.texi (Sparc-Aligned-Data): New node; document
        enforce-aligned-data.

        * config/tc-ppc.c (md_pseudo_table): If OBJ_XCOFF, add "long",
        "word", and "short".
        (ppc_xcoff_cons): New static function.

        * write.c (relax_segment): Give an error if a .space symbol is
        common or undefined.

        * read.c (read_a_source_file): Don't handle mri_pending_align if
        the handler is s_globl or s_ignore.

Thu Jan 30 11:46:59 1997  Fred Fish  <[email protected]>

        * config/tc-d10v.c (find_opcode): Remove unused variable "numops".
        * config/tc-tic80.c: Many additions to previous placeholder file.
        * config/tc-tic80.h: Ditto.

Thu Jan 30 12:28:18 1997  Alan Modra  <[email protected]>

        * config/tc-i386.c (i386_align_code): Improve the nop patterns.

Thu Jan 30 12:08:40 1997  Ian Lance Taylor  <[email protected]>

        * config/tc-mips.c (mips_fix_adjustable): New function.
        * config/tc-mips.h (tc_fix_adjustable): Call mips_fix_adjustable.
        (mips_fix_adjustable): Declare.

        Ideas from Srinivas Addagarla <[email protected]>:
        * read.c (read_a_source_file): After doing an mri_pending_align,
        adjust the line_label if there is one.
        (s_space): Set mri_pending_align if an odd number of bytes were
        output.

Wed Jan 29 15:31:12 1997  Martin M. Hunt  <[email protected]>

        * config/tc-d10v.h (md_do_align): Add this hook to call
        d10v_cleanup() when a ".align" is detected.

        * config/tc-d10v.c (find_opcode): Correctly calculate
        branch displacement when .aligns are present.

Wed Jan 29 09:42:11 1997  Jeffrey A Law  ([email protected])

        * config/tc-mn10200.c (md_relax_table): Define.
        (md_convert_frag): Implement.
        (md_assemble): Handle relaxable operands/instructions correctly.
        (md_estimate_size_before_relax): Implement.
        * config/tc-mn10200.h (TC_GENERIC_RELAX_TABLE): Define.

Tue Jan 28 15:27:28 1997  Ian Lance Taylor  <[email protected]>

        * config/tc-mips.c (append_insn): Give an error for jumps to a
        misaligned address.
        (md_apply_fix): Make a branch to an odd address an error rather
        than a warning.

        * config/tc-mips.c (md_convert_frag): If the user explicitly
        requested an extended opcode, pass warn as true to mips16_immed.

        * config/tc-mips.c (mips16_ip): Handle a missing expression like
        an explicit 0, so that explicitly extended instructions work
        correctly.

Mon Jan 27 17:41:20 1997  Ian Lance Taylor  <[email protected]>

        * ecoff.c (ecoff_build_symbols): Don't generate a local ECOFF
        symbol for a common symbol.

Wed Jan 22 10:39:39 1997  Doug Evans  <[email protected]>

        Patch presumed to have been checked in awhile ago but wasn't.
        Mon Nov 25 10:45:14 1996  Doug Evans  <[email protected]>
        * write.c: Delete "ifndef md_relax_frag" around is_dnrange.
        (relax_segment, case rs_org): Move code inside braces.  Move locals
        target,after inside too.
        (relax_segment, case rs_machine_dependent): Guts moved to ...
        (relax_frag): New function.
        Call md_prepare_relax_scan if defined.

Mon Jan 20 10:56:47 1997  Andreas Schwab  <[email protected]>

        * config/tc-m68k.c (m68k_ip): Reject pc-relative addresses for the
        'p' operand specifier.

Mon Jan 20 10:39:36 1997  J.T. Conklin  <[email protected]>

        * config/tc-m68k.c (HAVE_LONG_BRANCH): New macro, returns true for
        m68k family cpus which support long branch addressing modes.
        (m68k_ip, md_convert_frag_1, md_estimate_size_before_relax,
        md_create_long_jump): Use it.

Mon Jan 20 12:42:06 1997  Ian Lance Taylor  <[email protected]>

        * config/tc-mips.c (md_begin): Don't set SEC_ALLOC or SEC_LOAD for
        the .reginfo or .MIPS.options section if configured for an
        embedded target.

        * config/tc-mips.c (md_begin): Don't set interlocks for
        mips_4650.

Wed Jan 15 13:51:50 1997  Ian Lance Taylor  <[email protected]>

        * read.c (read_a_source_file): Make sure the symbol ends with
        whitespace before checking whether the next character is '='.

Tue Jan 14 15:07:27 1997  Robert Lipe <[email protected]>

        * config/tc-i386.c (sco_id): Moved from here...
        * config/obj-elf.c (sco_id): ...to here.  Adding the identifier
        really is an SCO ELF specific thing, not just a SCO x86 specific
        thing.

Mon Jan 13 22:43:01 1997  Michael Meissner  <[email protected]>

        * configure.in (tic80-*-*): Don't require 'coff'.
        * configure: Regenerate.

Thu Jan  9 09:08:43 1997  Ian Lance Taylor  <[email protected]>

        * read.c (emit_expr): Check for overflow of a negative value
        correctly.
        * write.c (fixup_segment): Likewise.
        * config/obj-coff.c (fixup_segment): Likewise.

        * config/tc-m68k.c (struct label_line): Define.
        (labels, current_label): New static variables.
        (md_assemble): Mark current_label as text, and clear it.
        (m68k_frob_label): New function.
        (m68k_flush_pending_output): New function.
        (m68k_frob_symbol): New function.
        * config/tc-m68k.h (tc_frob_label): Define.
        (md_flush_pending_output): Define.
        (tc_frob_symbol): Don't warn, just call m68k_frob_symbol.
        (tc_frob_coff_symbol): Likewise.

        * read.c (read_a_source_file): When defining a macro in MRI mode,
        don't add the symbol to the symbol table.

Tue Jan  7 11:21:42 1997  Jeffrey A Law  ([email protected])

        * config/tc-mn10300.c (tc_gen_reloc): Handle sym1-sym2 fixups
        here since fixup_segment doesn't (linkrelax is set).
        * config/tc-mn10200.c (tc_gen_reloc): Likewise.

Mon Jan  6 15:19:32 1997  Jeffrey A Law  ([email protected])

        * config/tc-mn10200.c (md_assemble): Tweak fx_offset for pc-relative
        relocs.

Fri Jan  3 16:47:08 1997  Jeffrey A Law  ([email protected])

        * config/tc-hppa.c (struct hppa_fix_struct): Tweak fx_r_field's type
        to avoid warnings with the native HP compiler.
        (fix_new_hppa): Similarly for the r_type argument.
        (pa_build_unwind_subspace, hppa_elf_mark_end_of_function): Enclose
        in an #if OBJ_ELF to keep gcc -Wall quiet.
        (md_apply_fix): Always initialize "result".

        * config/tc-mn10200.c (md_assemble): Generate relocations.

Fri Jan  3 18:17:23 1997  Andreas Schwab  <[email protected]>

        * config/tc-m68k.c (s_even): Adjust the alignment of the current
        section.

Fri Jan  3 17:10:33 1997  Richard Henderson  <[email protected]>

        * config/obj-elf.c (elf_file_symbol): When using ECOFF debugging,
        pass on the new file hook.

        * config/tc-alpha.c (alpha_fix_adjustable): Not quite the same as
        !alpha_force_relocation, as local LITERALs can be adjusted to be
        relative to the section.

Fri Jan  3 12:09:24 1997  Ian Lance Taylor  <[email protected]>

        * config/obj-coff.c (yank_symbols): If tc_frob_coff_symbol is
        defined, call it.
        * config/tc-m68k.h (tc_frob_symbol): Check whether text label is
        aligned to odd boundary.
        (tc_frob_coff_symbol): Define.

        * doc/as.texinfo (Set): Change parenthesized @xref to @pxref.

        * macro.c (macro_expand_body): In MRI mode, just copy a single &.

        * config/tc-m68k.c (m68k_ip): Call frag_grow before adding a
        PCINDEX frag.  From Ronald F. Guilmette <[email protected]>.

        * config/tc-m68k.c (m68k_ip): Accept 'B' as a size for an
        immediate value.
        (md_assemble): If the size is 'B', set fx_signed.
        (md_apply_fix_2): Use fx_signed when checking for overflow.

        * write.h (struct fix): Add fx_signed field.
        * write.c (fix_new_internal): Initialize fx_no_overflow and
        fx_signed fields.
        (fixup_segment): Use fx_signed when checking for overflow.
        * config/obj-coff.c (fixup_segment): Check fx_no_overflow and
        fx_signed when checking for overflow.

Thu Jan  2 13:37:29 1997  Ian Lance Taylor  <[email protected]>

        * NOTES, NOTES.config: Removed.  These are rarely, if ever,
        updated, and all the useful information is in doc/internals.texi.

        Based on patch from Ronald F. Guilmette <[email protected]>:
        * read.c (read_a_source_file): Check for conditional operators
        before doing an MRI pending alignment.
        * config/tc-m68k.h (m68k_conditional_pseudoop): Declare.
        (tc_conditional_pseudop): Define.
        * config/tc-m68k.c (m68k_conditional_pseudop): New function.
        * doc/internals.texi (CPU backend): Describe
        tc_conditional_pseudoop.

        Based on patch from Ronald F. Guilmette <[email protected]>:
        * config/tc-m68k.c (m68k_rel32_from_cmdline): New static
        variable.
        (md_begin): Check m68k_rel32_from_cmdline before setting
        m68k_rel32.
        (m68k_mri_mode_change): Likewise.
        (md_longopts): Add --disp-size-default-16 and
        --disp-size-default-32.
        (md_parse_option): Handle new options.
        (md_show_usage): Mention new options.
        * doc/c-m68k.texi (M68K-Opts): Document new options.

        Based on patch from Ronald F. Guilmette <[email protected]>:
        * config/tc-m68k.c (m68k_index_width_default): New static
        variable.
        (m68k_ip): Use m68k_index_width_default to set the size of a base
        register whose size was not given.
        (md_longopts): Add --base-size-default-16 and
        --base-size-default-32.
        (md_parse_option): Handle new options.
        (md_show_usage): Mention new options.
        * doc/c-m68k.texi (M68K-Opts): Document new options.

        * doc/c-mips.texi: Mention ISA level 4, and the -mips16 option.

        * configure.in: Recognize mips-*-linux* target.
        * configure: Rebuild.

        * config/tc-mips.c (load_register): Rewrite 64 bit handling to
        work if valueT is only 32 bits.

        * config/tc-mips.c: Throughout, check target_big_endian rather
        than byte_order.
        (byte_order): Remove.
        (mips_init_after_args): Remove.
        * config/tc-mips.h (LITTLE_ENDIAN, BIG_ENDIAN): Don't define.
        (mips_init_after_args): Don't declare.
        (tc_init_after_args): Don't define.

        * config/tc-mips.h (tc_frob_after_relocs): Define if
        OBJ_MAYBE_ELF.
        (mips_elf_final_processing): Likewise.
        (ELF_TC_SPECIAL_SECTIONS): Likewise.

Tue Dec 31 15:12:35 1996  Michael Meissner  <[email protected]>

        * config/tc-v850.c (md_assemble): If this is sst.{h,w} or
        sld.{h,w} and the operand is relocatable, adjust the adend by
        shifting it right one bit.

Tue Dec 31 12:56:41 1996  Ian Lance Taylor  <[email protected]>

        * read.c (read_a_source_file): Check mri_pending_align after
        checking for a macro.  From Ronald F. Guilmette
        <[email protected]>.

        * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.

        * config/tc-sparc.c (md_apply_fix3): Rename from md_apply_fix, and
        add segment argument.  If OBJ_ELF, treat a relocation against a
        symbol in a linkonce section like a relocation against an external
        symbol.
        * config/tc-sparc.h (MD_APPLY_FIX3): Define.

Mon Dec 30 11:35:40 1996  Ian Lance Taylor  <[email protected]>

        * config/tc-mips.c (mips16_macro): Add case for M_ABS.

Fri Dec 27 22:51:51 1996  Fred Fish  <[email protected]>

        * NOTES.config (Implementation): as.h #define's "GAS" not "gas",
        includes config.h instead of host.h, tc.h instead of tp.h, and
        targ-env.h instead of target-environment.h.
        Also, obj-format.h includes targ-cpu.h instead of
        target-processor.h.
        * configure.in (case ${generic_target}): Add tic80-*-coff entry.
        * configure: Rebuild with autoconf.
        * config/obj-coff.h (coff/tic80.h): Include if TC_TIC80 defined.
        (TARGET_FORMAT): Define to "coff-tic80".
        * config/tc-tic80.c: New file for TIc80 support.
        * config/tc-tic80.h: New file for TIc80 support.
        
Fri Dec 27 11:42:29 1996  Ian Lance Taylor  <[email protected]>

        * doc/as.texinfo (M): Mention explicitly that -M changes macro
        handling.

Thu Dec 19 12:06:08 1996  Ian Lance Taylor  <[email protected]>

        * write.c (adjust_reloc_syms): If the fixup symbol has been
        equated to an undefined symbol, convert the fixup to being against
        the target symbol.  Remove obsolete code handling a special case
        for i386 PIC.

Wed Dec 18 22:54:39 1996  Stan Shebs  <[email protected]>

        * mpw-make.sed: Use NewFolderRecursive for installation.

Wed Dec 18 16:00:42 1996  Martin M. Hunt  <[email protected]>

        * config/tc-d10v.c (do_assemble): Correct previous bug fix.

Wed Dec 18 15:27:40 1996  Martin M. Hunt  <[email protected]>

        * config/tc-d10v.c (md_assemble): Fix bug which caused
        second instruction in a line to be case sensitize.

Wed Dec 18 10:08:46 1996  Jeffrey A Law  ([email protected])

        * config/tc-mn10200.c (mn10200_insert_operand): Don't
        range check operands with MN10200_OPERAND_NOCHECK set.
        (check_operand): Likewise.

Tue Dec 17 10:59:32 1996  Ian Lance Taylor  <[email protected]>

        * config/tc-mips.c: Undo part of last Friday's alignment changes.
        (md_begin): Always align the text section to a four byte
        boundary.
        (append_insn): Remove call to record_align.

        * config/tc-mips.c (insn_label): Remove.
        (struct insn_label_list): Define.
        (insn_labels, free_insn_labels): New static variables.
        (mips_clear_insn_labels): New static function.
        (append_insn): Mark all mips16 text labels, and make them odd.
        Handle all labels after emitting a nop, not just one.  Call
        mips_clear_insn_labels rather than just clearing insn_label.
        (mips_emit_delays): Add insns parameter, and use it to decide
        whether to mark mips16 labels.  Handle all labels, not just one.
        Force mips16 labels to be odd.  Change all callers.
        (mips16_immed): Don't check for an odd branch target.
        (md_apply_fix): Don't check mips16 mode for a branch reloc.
        (mips16_extended_frag): Ignore the low bit in a branch target.
        (md_convert_frag): Likewise.
        (mips_no_prev_insn): Call mips_clear_insn_labels rather than just
        clearing insn_label.
        (mips_align, mips_flush_pending_output, s_cons): Likewise.
        (s_float_cons, s_gpword): Likewise.
        (s_align): Use insn_labels rather than insn_label.
        (s_cons, s_float_cons, s_gpword): Likewise.
        (mips_frob_file_after_relocs): New function.
        (mips_define_label): Rewrite to add to insn_labels list.
        * config/tc-mips.h (tc_frob_file_after_relocs): Define.
        * ecoff.c (ecoff_build_symbols): If the size of a function comes
        out odd, increment it.

        * config/tc-mips.c (append_insn): Only update prev_insn when not
        reordering if place is NULL.

        * config/tc-mips.c (mips16_ip): Check for a missing expression
        when using the register indirect addressing mode.

Mon Dec 16 10:08:46 1996  Jeffrey A Law  ([email protected])

        * config/tc-mn10200.c (mn10200_insert_operand): Don't
        check 24bit operands for overflow.
        (check_operand): Likewise.

Mon Dec 16 11:50:40 1996  Ian Lance Taylor  <[email protected]>

        * doc/as.texinfo (Section): Document how to use the .section
        pseudo-op for COFF and ELF.

Sun Dec 15 15:26:37 1996  Ian Lance Taylor  <[email protected]>

        * write.c (adjust_reloc_syms): Fix linkonce check for ELF.

Sat Dec 14 22:37:27 1996  Ian Lance Taylor  <[email protected]>

        * config/tc-mips.c (prev_insn_reloc_type): New static variable.
        (RELAX_MIPS16_ENCODE): Add dslot and jal_dslot arguments, and
        store them.  Adjust other RELAX_MIPS16 macros.
        (RELAX_MIPS16_DSLOT): Define.
        (RELAX_MIPS16_JAL_DSLOT): Define.
        (append_insn): Pass new arguments to RELAX_MIPS16_ENCODE.  Correct
        handling of whether previous instruction has a fixup.  Set
        prev_insn_reloc_type.
        (mips_no_prev_insn): Clear prev_insn_reloc_type.
        (mips16_extended_frag): Use the right base address for a PC
        relative add or load.
        (md_convert_frag): Likewise.  If a PC relative add or load is
        used, record the alignment for the section.

Fri Dec 13 13:00:33 1996  Ian Lance Taylor  <[email protected]>

        * write.c (adjust_reloc_syms): Don't reduce a reloc against a
        linkonce section into a reloc against the section symbol.

        * config/tc-mips.c (mips16_macro): Remove nop instructions after
        branch instructions.

        * config/tc-mips.c (md_begin): If configured for an embedded ELF
        system, don't set the section alignment to 2**4.
        (s_change_sec): Likewise.
        (append_insn): Call record_alignment for the section.
        (md_section_align): Don't align the section size for an embedded
        ELF system.

Thu Dec 12 16:40:47 1996  Ian Lance Taylor  <[email protected]>

        * write.c (adjust_reloc_syms): Make sure that symbols are
        resolved; expression symbols may have been skipped.
        * config/obj-coff.c (fixup_segment): Likewise.

Thu Dec 12 15:18:21 1996  Michael Meissner  <[email protected]>

        * config/tc-ppc.c (ppc_elf_suffix): Move @plt to
        BFD_RELOC_24_PLT_PCREL relocation.
        (md_apply_fix3): Support BFD_RELOC_24_PLT_PCREL.

Tue Dec 10 13:51:55 1996  Martin M. Hunt  <[email protected]>

        * config/tc-d10v.c (write_2_short): Remove code that called
        parallel_ok() when the programmer specified parallel instructions.

Tue Dec 10 12:23:19 1996  Jeffrey A Law  ([email protected])

        * config/tc-mn10300.c (md_assemble): Update to handle endianness
        issues correctly.

        * config/tc-mn10200.c (md_assemble): Opcode 0x0 is valid!
        * config/tc-mn10300.c (md_assemble): Likewise.

Tue Dec 10 11:37:14 1996  Ian Lance Taylor  <[email protected]>

        * config/tc-mips.c (append_insn): Make sure there is enough room
        in a frag after a mips16 instruction to switch it with a jump
        instruction.

        * config/tc-mips.c (mips16_extended_frag): Give an error for an
        attempt to use a non absolute symbol in an extending frag.

Mon Dec  9 16:48:20 1996  Jeffrey A Law  ([email protected])

        * config/tc-mn10200.c: Flesh out assembler support for MN10200.
        * config/tc-mn10200.h: Likewise.

Mon Dec  9 17:09:42 1996  Ian Lance Taylor  <[email protected]>

        * app.c (do_scrub_chars): At the end of a C comment, pass space to
        UNGET rather than PUT.  Set old_state before setting state to -2.

        * config/tc-mips.c (mips16_extended_frag): Avoid an infinite loop
        when extending because the value is exactly maxtiny + 1.

        * config/tc-mips.c (RELAX_MIPS16_ENCODE): Add small and ext
        arguments, and store them.  Adjust other RELAX_MIPS16 macros.
        (RELAX_MIPS16_USER_SMALL): Define.
        (RELAX_MIPS16_USER_EXT): Define.
        (mips16_small, mips16_ext): New static variables.
        (append_insn): Pass mips16_small and mips16_ext to
        RELAX_MIPS16_ENCODE.
        (mips16_ip): Set mips16_small and mips16_ext.
        (mips16_immed): Don't check mips16_autoextend.
        (mips16_extended_frag): Check USER_SMALL and USER_EXT.

        * write.c (write_relocs): Print an error for an out of range
        fixup, rather than calling abort.

        * as.c (main): Unlink the output file if there are errors while
        generating the fixups.

Fri Dec  6 18:48:13 1996  Ian Lance Taylor  <[email protected]>

        * config/tc-mips.c (mips16_extended_frag): Don't call
        S_GET_VALUE.
        (md_convert_frag): Call resolve_symbol_value before calling
        S_GET_VALUE, and don't add in the frag address.

        * config/tc-mips.c (mips16_immed): Add file and line parameters,
        and use them when reporting errors.  Change all callers.

Fri Dec  6 15:36:32 1996  Jeffrey A Law  ([email protected])

        * config/tc-mn10300.c: Fix various gcc -Wall warnings.
        Remove '$' prefixing for registers.

Fri Dec  6 00:55:48 1996  Martin  <[email protected]>

        * config/tc-d10v.c (md_assemble): Check to see if prev_seg
        is initialized before using it.
        (d10v_cleanup): No longer uses its argument, so make it void.

        * config/tc-d10v.h (d10v_cleanup): Change prototype.
        
Thu Dec  5 11:03:31 1996  Ian Lance Taylor  <[email protected]>

        * write.c (fixup_segment): Don't discard the symbol for a PC
        relative fixup to an absolute symbol.

Wed Dec  4 15:42:41 1996  Martin M. Hunt  <[email protected]>

        * config/tc-d10v.c (md_assemble, d10v_cleanup): Fix bug
        with multiple sections.

Wed Dec  4 13:00:07 1996  Ian Lance Taylor  <[email protected]>

        * config/tc-mips.c (md_longopts): Rename mips-16 to mips16, and
        no-mips-16 to no-mips16.
        (s_mipsset): Accept .set mips16 and .set nomips16.

Wed Dec  4 10:35:33 1996  Michael Meissner  <[email protected]>

        * config/tc-ppc.c (ppc_elf_suffix): Take expressionS pointer
        argument, and check for +/- constant following the suffix, folding
        it into the expression.
        (ppc_elf_cons): Change ppc_elf_suffix calls.
        (md_assemble): Ditto.
        (shlib): Replace boolean mrelocatable with enumeration shlib.
        (md_parse_option): Discriminate between PIC style shared libraries
        and -mrelocatable.
        (ppc_elf_validate_fix): Don't report warnings for PIC style shared
        libraries.

Tue Dec  3 23:18:29 1996  Michael Meissner  <[email protected]>

        * config/tc-ppc.h ({tc,ppc}_comment_chars): Define, so that we can
        change the comment characters.

        * config/tc-ppc.c (comment_chars): Delete in favor of
        tc_comment_chars.
        (ppc_{eabi,solaris}_comment_chars): Eabi and Solaris versions of
        comment chars.
        (ppc_comment_chars): Select appropriate comment chars by default.
        (msolaris): New flag for -m{,no-}solaris.
        (md_parse_option): Recognize -K pic.  Add support for
        -m{,no-}solaris.
        (md_show_usage): Update.
        (md_begin): Do not set ELF flags if Solaris.
        (ppc_elf_suffix): @local sets R_PPC_LOCAL24PC relocation.
        (md_apply_fix3): Add support for R_PPC_LOCAL24PC.

Mon Dec  2 13:48:57 1996  Ian Lance Taylor  <[email protected]>

        * as.c (main): Correct handling of flag_always_generate_output.

Sun Dec  1 21:46:05 1996  Jeffrey A Law  ([email protected])

        * config/tc-mn10300.c (tc_gen_reloc): Get the addend from
        fx_offset, not fx_addnumber.

        * config/tc-mn10300.h (tc_fix_adjustable): Don't do any
        reloc adjustments.

Sat Nov 30 17:34:48 1996  Eliot Dresselhaus  <[email protected]>

        * config/tc-i386.c: Correct misspelling: balenced to balanced.

Wed Nov 27 13:25:39 1996  Ian Lance Taylor  <[email protected]>

        * config/tc-mips.c (md_section_align): Check for an alignment of
        4, not an alignment of 16.  Corrects August 7 patch.

Tue Nov 26 10:33:16 1996  Ian Lance Taylor  <[email protected]>

        * configure, conf.in: Rebuild with autoconf 2.12.

        * config/tc-ppc.c (ppc_elf_lcomm): Don't give an error if no
        alignment is specified.

        Add support for mips16 (16 bit MIPS implementation):
        * config/tc-mips.c: Extensive additions for mips16 support, not
        listed here.
        (RELAX_OLD, RELAX_NEW): Use only 7 bits each.
        (insn_uses_reg): Change last parameter to an enum.
        * config/tc-mips.h (LOCAL_LABELS_DOLLAR): Define as 0.
        (md_relax_frag): Define as mips_relax_frag.
        (mips_relax_frag): Declare.
        (struct mips_cl_insn): Add use_extend and extend fields.
        (tc_fix_adjustable): Define.
        * config/obj-elf.h (S_GET_OTHER): Define.
        (S_SET_OTHER): Define.

Mon Nov 25 18:02:29 1996  J.T. Conklin  <[email protected]>

        * config/tc-m68k.c (m68k_ip): Implement cases for new <, >, m, n,
        o and p operand specifiers.

Mon Nov 25 10:45:14 1996  Doug Evans  <[email protected]>

        * write.c: Delete "ifndef md_relax_frag" around is_dnrange.
        (relax_segment, case rs_org): Move code inside braces.  Move locals
        target,after inside too.
        (relax_segment, case rs_machine_dependent): Guts moved to ...
        (relax_frag): New function.
        Call md_prepare_relax_scan if defined.
        * config/tc-m68k.h (md_prepare_relax_scan): Renamed from
        M68K_AIM_KLUDGE.

Mon Nov 25 08:49:36 1996  Jeffrey A Law  ([email protected])

        * config/tc-mn10300.c (address_registers): Use '$' as register
        prefix instead of '%'.
        (data_registers, other_registers, md_assemble): Likewise.

        * config/tc-mn10300.c (address_registers): Use '%' prefix for regs.
        (data_registers, other_registers, md_assemble): Likewise.

        * config/tc-mn10300.c (md_assemble): Correctly determine the
        correct location and type for each relocation.
        (md_pcrel_from): Simplify.

Fri Nov 22 15:42:26 1996  Ian Lance Taylor  <[email protected]>

        * config/tc-sh.c (md_convert_frag): Improve warning when branch is
        converted into branch around branch.

Thu Nov 21 11:56:11 1996  Jeffrey A Law  ([email protected])

        * config/tc-mn10300.h (DIFF_EXPR_OK): Don't define this.
        (tc_fix_adjustable): Don't adjust relocs against weak symbols or 
        pc-relative relocs.
        * config/tc-mn10300.c (md_begin): Set linkrelax.
        (md_assemble): Create fixups as needed.
        (md_apply_fix3): Gut.  It shouldn't ever get called anymore.

Tue Nov 19 17:48:06 1996  Michael Meissner  <[email protected]>

        * config/tc-d10v.c (parallel_ok): When automatically converting
        serial ops to parallel, do not consider a branch as the first
        instruction.

Tue Nov 19 13:35:22 1996  Jeffrey A Law  ([email protected])

        * config/tc-mn10300.c (md_assemble): Handle MN10300_OPERAND_REG_LIST.

Mon Nov 18 15:26:55 1996  Jeffrey A Law  ([email protected])

        * config/tc-mn10300.c (mn10300_insert_operand): Provide prototype
        via PARAMS.
        (check_operand): Likewise.

Mon Nov 18 15:22:28 1996  Michael Meissner  <[email protected]>

        * config/tc-d10v.c (parallel_ok): Branch and link instructions
        modify r13.
        (write_2_short): Call parallel_ok to check whether two short
        instructions the user requested execute in parallel, can be
        executed that way.

Thu Nov 14 11:17:49 1996  Martin M. Hunt  <[email protected]>

        * config/tc-d10v.c (write_2_short): Fix bug that wouldn't
        allow a branch and link in parallel with an exe instruction.

Fri Nov  8 13:55:03 1996  Martin M. Hunt  <[email protected]>

        * doc/c-d10v.texi: Add info on @word modifier.

Wed Nov  6 13:46:07 1996  Jeffrey A Law  ([email protected])
        
        * config/tc-mn10300.c (mn10300_insert_operand): MN10300_OPERAND_SPLIT
        operands are assumed to be 32bits.  Use "bits" field to hold the
        number of bits in the main instruction word for MN10300_OPERAND_SPLIT.
        (mn10300_check_operand): MN10300_OPERAND_SPLIT operands are assumed
        to be 32bits.

        * config/tc-mn10300.c (mn10300_insert_operand): Shift low part
        of a MN10300_OPERAND_SPLIT operand by operand->shift.

        * config/tc-mn10300.c (mn10300_insert_operand): Handle
        MN10300_OPERAND_SPLIT.

Tue Nov  5 13:30:40 1996  Jeffrey A Law  ([email protected])

        * config/tc-mn10300.c (md_assemble): Insert operands into
        the extension part of the instruction if necessary.
        (mn10300_insert_operand): Accept pointer to extension word
        argument.  Make insn a pointer argument too.  Return type
        is now void.  All callers changed.

Mon Nov  4 12:53:40 1996  Jeffrey A Law  ([email protected])

        * config/tc-mn10300.c (mn10300_insert_operand): Handle
        repeated register operands.

Fri Nov  1 10:42:49 1996  Ian Lance Taylor  <[email protected]>

        * doc/as.texinfo: Added section on reporting bugs.

        * config/tc-alpha.c: Change uses of void * to PTR.  Change the
        alpha_macro emit field to expect a const argument, and change the
        arg field to be const.  Fix some spacing to follow the GNU
        standard.

Fri Nov  1 10:32:03 1996  Richard Henderson  <[email protected]>

        * config/tc-alpha.c (md_parse_option): Add knowledge of 21164pc
        (pca56) and 21264 (ev6) cpus.
        (md_apply_fix): Private relocation types are now negative.
        (alpha_force_relocation): Likewise.
        (tc_gen_reloc): Likewise.
        (emit_insn): Likewise.
        (emit_ldXu): Do the right thing when the hardware can do byte insns.
        (emit_stX): Likewise.
        (emit_sextX): Likewise.

Thu Oct 31 16:33:21 1996  Ian Lance Taylor  <[email protected]>

        * config/obj-coff.c (do_relocs_for): Call resolve_symbol_value on
        a symbol found in a reloc.

        * symbols.c (resolve_symbol_value): Improve the error message if
        an undefined symbol is used in an expression.

Wed Oct 30 20:15:35 1996  Ian Lance Taylor  <[email protected]>

        * doc/internals.texi: Rewrite, and add a lot of documentation.
        * doc/Makefile.in (internals.info): New target.

Wed Oct 30 14:55:57 1996  Jeffrey A Law  ([email protected])

        * config/tc-v850.h (tc_fix_adjustable): Don't adjust relocs
        against weak symbols.

Tue Oct 29 12:28:16 1996  Jeffrey A Law  ([email protected])

        * config/tc-v850.c (md_assemble): Don't lose for relaxable
        addresses like .+6.

        * config/tc-v850.c (md_convert_frag): Make sure we insert the
        fixup at the right address within the frag.

        * config/tc-v850.c (md_convert_frag): Don't set fragP->fr_fix
        to an absolute value, instead increment it as needed.

        * config/tc-v850.h (TC_GENERIC_RELAX_TABLE): Define.
        * config/tc-v850.c: Fix some indention problems.
        (md_relax_table): Define for D9->D99 branch displacement
        relaxing.
        (md_convert_frag): Do something useful instead of aborting.
        (md_estimate_size_before_relax): Likewise.
        (md_assemble): Note if the matching instruction has a relaxable
        operand.  If it does, allocate frag with frag_var and don't
        do any fixups.

Mon Oct 28 10:48:40 1996  Martin M. Hunt  <[email protected]>

        * config/tc-d10v.h (md_cleanup): New function.  This is needed to
        write out any buffered instructions when a ".end" is found.

Mon Oct 28 10:43:45 1996  Martin M. Hunt  <[email protected]>

        * read.c (read_a_source_file): New hook md_cleanup().

Fri Oct 25 00:01:00 1996  Ian Lance Taylor  <[email protected]>

        * write.c (fix_new_exp): Use make_expr_symbol to build an
        expression symbol for a complex fixup.

Thu Oct 24 14:31:04 1996  Jeffrey A Law  ([email protected])

        * config/tc-v850.c (v850_reloc_prefix): Several disgusting
        hacks to improve parsing of complex hi, lo, zda, etc
        expressions.
        (md_assemble): Don't demand and eat a trailing ')' after finding
        a v850 relocation prefix.  Sign extend the constant in a
        BFD_RELOC_LO16 expression.  Do eat a trailing ')' after a complete
        operand.
        (parse_cons_expression_v850): Don't eat a trailing ')' after
        finding a v850 relocation prefix.

        * config/tc-v850.h (TC_PARSE_CONS_EXPRESSION): Define.
        (TC_CONS_FIX_NEW): Likewise.
        * config/tc-v850.c (parse_cons_expression_v850): New function.
        (cons_fix_new_v850): Likewise.

        * config/tc-v850.h (tc_fix_adjustable): Don't adjust TDA relocs.

Wed Oct 23 18:20:29 1996  Ian Lance Taylor  <[email protected]>

        * config/tc-ppc.c (md_apply_fix3): Give a better warning message
        for an unknown relocation type.

Wed Oct 23 16:21:28 1996  Jeffrey A Law  ([email protected])

        * config/tc-v850.c (md_pseudo_table): Add .word; allocates
        4 bytes of space.

Tue Oct 22 22:01:25 1996  Jeffrey A Law  ([email protected])

        * config/tc-v850.c (md_assemble): Handle TDAOFF relocs
        differently for movea & sst/sld insns.

Tue Oct 22 17:09:32 1996  Michael Meissner  <[email protected]>

        * config/tc-d10v.c (parallel_ok): Don't allow illegal combinations
        of instructions.

Tue Oct 22 11:28:39 1996  Ian Lance Taylor  <[email protected]>

        * obj.h (struct format_ops): Add frob_file_after_relocs field.
        * config/obj-multi.h (obj_frob_file_after_relocs): Define.
        * config/obj-ecoff.c (ecoff_format_ops): Initialize new
        frob_file_after_relocs field.
        * config/obj-elf.c (elf_format_ops): Likewise.
        * config/tc-mips.c: Undefine obj_frob_file_after_relocs before
        including obj-elf.h.

Mon Oct 21 11:38:30 1996  Ian Lance Taylor  <[email protected]>

        * config/tc-mips.c (cons_fix_new_mips): Only treat 8 byte reloc
        specially if not ELF.
        (md_apply_fix): Handle BFD_RELOC_64.
        (tc_gen_reloc): Handle BFD_RELOC_64.

        * config/tc-i386.c (md_apply_fix3): Don't increment value for a PC
        relative reloc when BFD_ASSEMBLER and OBJ_AOUT (more ugly gas
        reloc hacking).

        * config/obj-aout.h (S_IS_DEFINE): non BFD_ASSEMBLER version:
        Don't check S_GET_OTHER.

Fri Oct 18 14:06:26 1996  Ian Lance Taylor  <[email protected]>

        * config/tc-mips.c (mips_ip): Accept an odd floating point
        register with l.s or s.s.

        * config/obj-aout.c (obj_pseudo_table): Use obj_aout_type for
        .type pseudo-op.
        (obj_aout_type): New static function.

Thu Oct 17 17:55:17 1996  Ian Lance Taylor  <[email protected]>

        * Makefile.in ($(OBJS)): Depend upon libiberty.h.

Wed Oct 16 11:28:31 1996  Jeffrey A Law  ([email protected])

        * config/tc-v850.c (v850_reloc_prefix): Recognize zdaoff, tdaoff
        and sdaoff expressions.

        * write.c (fixup_segment): Don't add symbol value to addend if
        TC_V850 and OBJ_ELF.
        * config/tc-v850.h (tc_fix_adjustable): Don't adjust any
        pc-relative fixups.

        * config/tc-v850.c (md_pcrel_from): Undo yesterday's changes.
        (md_pcrel_from_section): Likewise.
        * config/tc-v850.h (MD_PCREL_FROM_SECTION): Likewise.

Tue Oct 15 23:19:00 1996  Jeffrey A Law  ([email protected])

        * config/tc-v850.c (md_pcrel_from): Delete unused function.
        (md_pcrel_from_section): New function.
        * config/tc-v850.h (MD_PCREL_FROM_SECTION): Define.

Mon Oct 14 13:59:12 1996  Ian Lance Taylor  <[email protected]>

        * config/tc-mips.c (load_register): Add cast to offsetT when using
        a constant with &~.

Mon Oct 14 11:24:28 1996  Richard Henderson  <[email protected]>

        * config/obj-elf.c (elf_frob_file): Move ECOFF debug processing to ...
        (elf_frob_file_after_relocs): ... here.  New function.
        * config/obj-elf.h (obj_from_file_after_relocs): New macro.
        * write.c (write_object_file): Call *frob_after_relocs after the
        call to write_relocs.

        * config/tc-alpha.c: Use new BFD_RELOC_ALPHA_ELF_LITERAL reloc.

        * config/tc-alpha.c (load_expression): Don't SET_VALUE on the section
        symbol, as this messes up linking.  Instead, expand the recursive call
        inline and change up the appropriate bits to get the 0x8000 offset
        in the reloc addend.

Thu Oct 10 17:30:31 1996  Ian Lance Taylor  <[email protected]>

        * config/tc-sparc.h (tc_fix_adjustable): Permit the difference of
        two symbols in the same segment to be adjusted.

        * configure.in: Don't get confused by CPU-VENDOR-linux-gnu.
        * configure: Rebuild.

Thu Oct 10 17:22:18 1996  Michael Meissner  <[email protected]>

        * config/tc-ppc.c (ppc_insert_operand): Change most warnings into
        errors.
        (ppc_elf_validate_fix): Ditto.
        (md_assemble): Ditto.
        (ppc_tc): Ditto.
        (ppc_pe_section): Ditto.
        (ppc_frob_symbol): Ditto.

Thu Oct 10 12:05:45 1996  Jeffrey A Law  ([email protected])

        * config/mn10300.c (md_assemble): Pass an extra shift count
        to mn10300_insert_operand based on the opcode format.
        (mn10300_insert_operand): Accept and use extra shift count
        parameter.

        * config/tc-mn10300.c (md_assemble): Use FMT_* macros for
        formats rather than hard-coded constants.

        * config/tc-mn10300.c (md_assemble): Format D5 instructions
        are 7 bytes long.  Write out instructions in big-endian format.

Tue Oct  8 14:56:15 1996  Jeffrey A Law  ([email protected])

        * config/tc-mn10300.c (md_assemble): Tweak further so
        that all instructions are parsed correctly.

Tue Oct  8 13:02:21 1996  Ian Lance Taylor  <[email protected]>

        * as.h: Include libiberty.h.
        (xmalloc, xrealloc): Don't declare.
        * as.c: Don't include libiberty.h.
        * expr.c, read.c, stabs.c, config/obj-coff.c: Likewise.
        * config/tc-mips.c: Likewise.
        * messages.c: Likewise.
        (xstrerror): Don't declare.
        * xmalloc.c: Remove.

Mon Oct  7 16:53:23 1996  Jeffrey A Law  ([email protected])

        * config/tc-mn10300.h (pre_defined_registers) Remove.
        (system_registers, cc_names): Likewise.
        (address_registers, data_registers, other_registers): New register
        arrays.
        (register_name, system_register_name, cc_name): Remove.
        (mn10300_reloc_prefix): Likewise.
        (data_register_name): New function.
        (address_register_name, other_register_name): Likewise.
        (md_assemble): Rough cut at parsing operands.  Remove lots of
        unwanted code.
        (md_apply_fix3): Disable for now.

Mon Oct  7 11:38:34 1996  Andreas Schwab  <[email protected]>

        * config/tc-m68k.c (select_control_regs): New function, extracted
        out of m68k_init_after_args.
        (m68k_init_after_args): Use it.
        (mri_chip): Use it here as well to update set of allowed control
        regs for movec.

Mon Oct  7 11:24:29 1996  Ian Lance Taylor  <[email protected]>

        * config/obj-elf.c (elf_begin): New function.
        (obj_elf_section): Add the section symbol to the symbol table.
        * config/obj-elf.h (obj_begin): Define.
        (elf_begin): Declare.
        * as.c (perform_an_assembly_pass): Call obj_begin if it is
        defined.

Fri Oct  4 18:37:32 1996  Ian Lance Taylor  <[email protected]>

        * config/obj-coff.c (fixup_segment): Subtract the section address
        from a PC relative reloc if TC_M68K.

Thu Oct  3 15:15:30 1996  Ian Lance Taylor  <[email protected]>

        * config/tc-sparc.c (md_pseudo_table): Make .uahalf, .uaword, and
        .uaxword available even if not OBJ_ELF.
        (md_atof): Remove unused local variable wordP.

Thu Oct  3 00:16:50 1996  Jeffrey A Law  ([email protected])

        * config/tc-mn10x00.c, config/tc-mn10x00.h: New files
        for Matsushita MN10x00 support.
        * configure.in: Recognize mn10x00-*-*
        * configure: Rebuilt.

Wed Oct  2 15:54:03 1996  Klaus Kaempf  <[email protected]>

        * config/obj-evax.h: move openvms definitions from here to tc-alpha.c.
        * config/tc-alpha.c: add support for vms_case_hack like in vax/vms.
        (load_expression): track clobbering of base reg before jmp/jsr.
        (s_alpha_file): pass case_hack flags and source filename via
        symbol table to bfd.
        * config/tc-alpha.h (TC_CONS_FIX_NEW): define

Tue Oct  1 16:16:01 1996  Joel Sherrill  <[email protected]>

        * configure.in (mips-*-rtems*): New target, like mips-*-elf*.
        * configure: Rebuild.

Tue Oct  1 12:37:48 1996  Ian Lance Taylor  <[email protected]>

        * read.c (s_macro): Warn if a macro has the same name as a
        pseudo-op.
        (s_space): In m68k MRI mode, align to a word boundary.
        * macro.c (define_macro): Add namep parameter.  Change all
        callers.
        * macro.h (define_macro): Update declaration.

        * as.c (show_usage): Print bug report address.
        (parse_args): Change version printing to match current GNU
        standards.
        * gasp.c (show_usage): Print bug report address.
        (main): Change version printing to match current GNU standards.

        * config/tc-m68k.c (init_table): Correct access control unit
        register numbers.  From Ken Rose <[email protected]>.

        * config/tc-alpha.c: Add some static function prototypes.
        (alpha_macros): Move to top of file.  Make static.
        (alpha_num_macros): Move to top of file.

Tue Oct  1 09:36:19 1996  Stu Grossman  ([email protected])

        * config/tc-v850.h:  Define LOCAL_LABEL to recognise _.L_* symbols
        generated by DWARF.

Sat Sep 28 03:38:08 1996  Ian Lance Taylor  <[email protected]>

        * listing.c (list_symbol_table): Remove bogus code in BFD64 case,
        and just call sprintf_vma.

Thu Sep 26 16:04:11 1996  Ian Lance Taylor  <[email protected]>

        * expr.c (expr): Change >>= to >> (fix typo).  (From meissner).

Tue Sep 24 19:05:08 1996  Ian Lance Taylor  <[email protected]>

        * read.c (float_cons): Call md_flush_pending_output if it is
        defined.

Tue Sep 24 12:22:18 1996  Martin M. Hunt  <[email protected]>

        * config/tc-d10v.c (md_operand): Created.  Allows operands to 
        start with '#'.
        * config/tc-d10v.h (md_operand): Undefined.

Mon Sep 23 12:13:18 1996  Ian Lance Taylor  <[email protected]>

        * config/tc-m68k.c (add_fix): Treat a width of '3' like 'B'.
        (md_assemble): A fixup width of '3' means a 1 byte reloc.

Thu Sep 19 12:21:24 1996  Ian Lance Taylor  <[email protected]>

        * config/obj-coff.c (fixup_segment): Don't adjust PC relative
        reloc for the i960 for a reloc in the same section.  This undoes
        one of the two changes made Aug 19.

Wed Sep 18 12:11:58 1996  Ian Lance Taylor  <[email protected]>

        * config/obj-coff.c (obj_coff_endef): Both versions: Move C_STAT
        symbols to the position of the debugging information.

Mon Sep 16 11:41:40 1996  Ian Lance Taylor  <[email protected]>

        * expr.c (expr): Always use unsigned right shifts for >>.

Thu Sep 12 10:25:45 1996  James G. Smith  <[email protected]>

        * config/tc-arm.c (md_apply_fix3): Update two thumb instruction
        slots when processing BL fixups.

        * config/tc-arm.c (output_inst): Ensure Thumb BL fixup is marked
        on the first half of the instruction.

Wed Sep 11 00:09:35 1996  Ian Lance Taylor  <[email protected]>

        * ecoff.c (ecoff_stab): Create an expression symbol for a complex
        stabs expression, rather than giving an error.

        * ecoff.c (ecoff_new_file): Don't do anything if we are still in
        the same file.

Tue Sep 10 11:45:37 1996  Ian Lance Taylor  <[email protected]>

        * config/tc-mips.c (append_insn): Fill in the value for a constant
        jump, rather than creating a reloc.

Mon Sep  9 10:57:42 1996  Ian Lance Taylor  <[email protected]>

        * config/tc-mips.c (append_insn): Don't swap an instruction which
        sets a condition code with an instruction which uses a condition
        code.
        (mips_ip): In cases 'N' and 'M', look for $fccN rather than an
        immediate value.

        * config/tc-mips.c (md_begin): Recognize r5000 for cpu.
        (mips_ip): Give a better error message if the ISA level is wrong.
        (md_parse_option): Recognize -mcpu=[v][r]5000.

Sat Sep  7 13:25:55 1996  James G. Smith  <[email protected]>

        * config/tc-mips.c (COUNT_TOP_ZEROES): Added macro to count
        leading zeroes.
        (load_register): Ensure hi32 bits are not lost during lo32bit
        processing. Fix shift offset that was overflowing into the next
        instruction field. Add code to generate shorter sequences for
        constants with a single contiguous seqeuence of ones.

Fri Sep  6 17:07:12 1996  Martin M. Hunt  <[email protected]>

        * config/tc-d10v.c (d10v_dot_word): New function to support
        "@word" with the word pseudo-op.
        (md_apply_fix3): Cleanup and changes to support correct sizes
        for 16 and 18-bit relocs.

Fri Sep  6 16:00:29 1996  Doug Evans  <[email protected]>

        * configure.in (sparc-*-aout): Set `em'.
        * configure: Regenerated.
        * config/te-sparcaout.h: New file.
        * config/tc-sparc.h (TARGET_BYTES_BIG_ENDIAN): Define.
        Ifdef TE_SPARCOUT define TARGET_FORMAT and SPARC_BIENDIAN.
        * config/tc-sparc.c (INSN_BIG_ENDIAN): New macro.
        (SPECIAL_CASE_{SETSW,SETX}): Define.
        ({NOP,OR,FMOVS,SETHI,SLLX,SRA}_INSN): Define.
        (md_begin): Delete setting of `target_big_endian'.
        (output_insn): New function.
        (md_assemble): Rewrite.  Add `setx' support.
        (sparc_ip): Handle `0' operand char.  Recognize setuw, setsw, setx
        special cases.
        (md_atof): Add little endian support.
        (md_number_to_chars): Likewise.
        (md_apply_fix): Likewise.
        (md_longopts): Recognize -EL,-EB ifdef SPARC_BIENDIAN.
        (md_parse_option): Likewise.
        (md_show_usage): Print -EL, -EB ifdef SPARC_BIENDIAN.

Thu Sep  5 13:40:29 1996  Ian Lance Taylor  <[email protected]>

        * ecoff.c (ecoff_new_file): New function.
        * ecoff.h (ecoff_new_file): Declare.
        * config/obj-ecoff.h (obj_app_file): Define.

Thu Sep  5 13:39:25 1996  Richard Henderson  <[email protected]>

        * config/tc-alpha.c (load_expression): Bias the .lit8 section
        symbol by 32k so that our 16-bit signed offset can address the
        entire chunk.  Reported by <[email protected]>.

Wed Sep  4 10:23:20 1996  Ian Lance Taylor  <[email protected]>

        * config/tc-mips.c (load_register): Remove unused variable tmp.

Wed Sep  4 11:24:29 1996  James G. Smith  <[email protected]>

        * config/tc-mips.c (load_register): Remove unnecessary code that
        was causing the high 32bits of 64bit constants to be lost.
        
Tue Sep  3 13:52:56 1996  Martin M. Hunt  <[email protected]>

        * config/tc-d10v.c: Added changes to support function
        pointers and "@word" syntax.

Tue Sep  3 11:57:18 1996  Jeffrey A Law  ([email protected])

        * config/tc-v850.c: Remove commented out and #if 0'd code.
        (v850_reloc_prefix): Provide prototype.
        (postfix, get_reloc, build_insn): Remove prototypes for nonexistant
        functions.
        (md_begin, md_assemble, md_apply_fix3): Remove unused variables.
        (md_assemble): Add default to case statement.

Sat Aug 31 16:03:00 1996  Jeffrey A Law  ([email protected])

        * config/tc-v850.c (md_assemble): Compute size of the instrction
        from the opcode.

        * config/tc-v850.c (md_apply_fix3): Do simple byte, short and
        word fixups too.

Fri Aug 30 23:50:08 1996  Jeffrey A Law  ([email protected])

        * config/tc-v850.c (md_apply_fix3): Use little endian get/put
        routines to fetch/store the updated instruction from/to memory.
        (v850_insert_operand): If the operand has a specialized insert
        routine, call it.

Fri Aug 30 18:35:26 1996  J.T. Conklin  <[email protected]>

        * config/tc-v850.c (reg_name_search): Align calling convention to
        be like identical function found in tc-ppc.c.
        (get_reloc): Removed.
        (v850_reloc_prefix): New function, parse lo(), hi() and hi0().
        (md_assemble): emit fixups.
        (md_pcrel_from): renamed from md_pcrel_from_section, emit proper
        displacement.
        (md_apply_fix3): handle fixups/relocs.
        * config/tc-v850.h (MD_PCREL_FROM_SECTION): Removed definition.
        
Fri Aug 30 18:12:00 1996  Ian Lance Taylor  <[email protected]>

        Add SH ELF support.
        * configure.in (sh-*-elf*): New target.
        * config/tc-sh.h (TARGET_ARCH): Define.
        (WORKING_DOT_WORD): Define.
        (TC_COFF_FIX2RTYPE): Only define if OBJ_COFF.
        (BFD_ARCH, COFF_MAGIC, TC_COUNT_RELOC): Likewise.
        (TC_RELOC_MANGLE, tc_coff_symbol_emit_hook): Likewise.
        (DO_NOT_STRIP, NEED_FX_R_TYPE, TC_KEEP_FX_OFFSET): Likewise.
        (TC_COFF_SIZEMACHDEP, tc_frob_file): Likewise.
        (SUB_SEGMENT_ALIGN): Likewise.
        (RELOC_32): Don't define.
        (tc_frob_file_before_adjust): Define if BFD_ASSEMBLER.
        (target_big_endian): Declare if OBJ_ELF.
        (TARGET_FORMAT): Define if OBJ_ELF.
        * config/tc-sh.c: Use BFD reloc codes instead of SH COFF reloc
        numbers throughout.
        (tc_crawl_symbol_chain): Only define if OBJ_COFF.
        (tc_headers_hook, tc_coff_sizemachdep): Likewise.
        (struct sh_count_relocs): Define.
        (sh_count_relocs): New static function, broken out of
        sh_frob_file.  Add BFD_ASSEMBLER code.
        (sh_frob_section): Likewise.
        (sh_frob_file): Call sh_frob_section.
        (md_convert_frag): If BFD_ASSEMBLER, change type of headers, and
        call section_symbol rather than seg_info (seg)->dot.
        (md_section_align): Add OBJ_ELF version.
        (SWITCH_TABLE_CONS): Define.
        (SWITCH_TABLE): Use SWITCH_TABLE_CONS.
        (md_apply_fix): Change parameter types if BFD_ASSEMBLER.  Only
        handle fx_r_type == 0 if not BFD_ASSEMBLER.  Return 0 if
        BFD_ASSEMBLER.
        (struct reloc_map): Define if not BFD_ASSEMBLER.
        (coff_reloc_map): Likewise.
        (sh_coff_reloc_mangle): Use coff_reloc_map to convert fx_r_type.
        (tc_gen_reloc): New function if BFD_ASSEMBLER.
        * write.c (write_relocs): Ifdef out fx_where test which triggers
        inappropriately for SH ELF.
        (write_object_file): Call tc_frob_file_before_adjust and
        obj_frob_file_before_adjust if they are defined.

        * write.c (write_object_file): Use BFD_RELOC_16, not
        BFD_RELOC_NONE, when calling fix_new_exp for a broken word.

        * read.c (emit_expr): Fix conversion of byte count to BFD reloc
        code.

Fri Aug 30 14:47:38 1996  Martin M. Hunt  <[email protected]>

        * config/tc-d10v.c (find_opcode): Fix problem with calculating 
        branch sizes in across sections.

Fri Aug 30 00:44:13 1996  Jeffrey A Law  ([email protected])

        * config/tc-850.c (md_assemble): Handle hi() correctly.  Handle
        hi0() too.

Wed Aug 28 23:11:08 1996  Jeffrey A Law  ([email protected])

        * config/tc-v850.c (md_begin): Deal with end of opcode
        table marker.

Wed Aug 28 19:20:04 1996  Martin M. Hunt  <[email protected]>

        * config/tc-d10v.c (find_opcode): Fix a bug which could generate
        the wrong opcode for cases like st2w where there are many forms
        of the same instruction.

Tue Aug 27 13:53:22 1996  Ian Lance Taylor  <[email protected]>

        * expr.c (operand): If md_parse_name is defined, call it before
        calling symbol_find_or_make.
        * config/tc-ppc.h (md_parse_name): Define.
        (ppc_parse_name): Declare.
        * config/tc-ppc.c (reg_name_search): Add regs and regcount
        parameters.
        (register_name): Update call to reg_name_search.
        (cr_operand): New static variable.
        (cr_names): New static const array.
        (ppc_parse_name): New function.
        (md_assemble): If PPC_OPERAND_CR is set in the operand flags, set
        cr_operand before calling expression.

Tue Aug 27 09:05:50 1996  Jeffrey A Law  ([email protected])

        * config/tc-hppa.c (tc_gen_reloc): Add new argument to
        hppa_gen_reloc_type call.

Mon Aug 26 18:24:51 1996  Martin M. Hunt  <[email protected]>

        * config/tc-d10v.c: Fixed ".word".  Fixed problem with range checking
        on addresses.  Improved error messages.
        * doc/c-d10v.texi: Added docs for register pairs.

Mon Aug 26 13:39:27 1996  Martin M. Hunt  <[email protected]>

        * config/tc-d10v.c (parallel_ok): Fix bug in parallel 
        checking code.

Mon Aug 26 14:38:22 1996  Ian Lance Taylor  <[email protected]>

        * ecoff.c (init_file): Initialize fMerge to 1.
        (add_file): Restore old file merging code, but only merge files if
        fMerge is set.
        (ecoff_directive_loc): Clear fMerge field of current file.
        (ecoff_generate_asm_lineno): Likewise.

Fri Aug 23 11:40:47 1996  Martin M. Hunt  <[email protected]>

        * doc/c-d10v.texi: Fix typo. 

Fri Aug 23 10:41:32 1996  Jeffrey A Law  ([email protected])

        * config/tc-v850.c (md_assemble): Correct bit masking for
        hi and lo expressions.

        * config/tc-v850.c (md_assemble): Rough cut at demanding
        "ep" or "r30" in sst and sld instructions.
        (md_apply_fix3): Don't abort.  Just warn that we don't
        have relocs yet.

        * config/tc-v850.c (CC_NAME_CNT): Define.
        (cc_name): New function.
        (md_assemble): Handle V850_OPERAND_CC correctly.

        * config/tc-v850.c (md_assemble): Don't forget to initialize
        "insn"!

        * config/tc-v850.c (reg_name_search): Generalize to search
        any given register table.
        (register_name): Pass appropriate table and size to reg_name_search.
        (system_register_name): New function.
        (SYSREG_NAME_CNT): Define.
        (md_assemble): Handle operands which are system registers.
        
        * config/tc-v850.c (md_assemble): If we find a register, but the
        opcode doesn't want a register, then we don't have a match.
        (md_assemble): Get size of the instruction from the opcode table.

Thu Aug 22 10:20:30 1996  Ian Lance Taylor  <[email protected]>

        * configure.in: Set and substitute HLDENV.
        * configure: Rebuild.
        * Makefile.in (HLDENV): New variable.
        (as.new): Use $(HLDENV).

        * ecoff.c (ecoff_directive_endef): Avoid a division by zero error
        if an array dimension is not known.

Thu Aug 22 10:50:00 1996  Martin M. Hunt  <[email protected]>

        * config/tc-d10v.c: Fix a reloc bug caused by my last change. 
        * doc/c-d10v.texi: Cleanup.
        
Tue Aug 20 15:15:16 1996  J.T. Conklin  <[email protected]>

        * config/tc-v850.c: New file.
        * config/tc-v850.h: New file.
        * configure (v850-*-elf): New target.
        * configure.in (v850-*-elf): New target.
        
Wed Aug 21 15:50:54 1996  Martin M. Hunt  <[email protected]>

        * doc/c-d10v.texi: New file.
        * doc/all.texi: Added D10V stuff.
        * doc/as.texinfo: Added D10V stuff.

Tue Aug 20 14:10:02 1996  Martin M. Hunt  <[email protected]>

        * config/tc-d10v.c: All references to defined symbols should
        now use the optimal instruction.  .float and .double now work. 

Mon Aug 19 14:41:36 1996  Ian Lance Taylor  <[email protected]>

        * config/obj-coff.c (fixup_segment): Adjust PC relative reloc by
        section address for the i960 as is done for the i386.

Thu Aug 15 16:37:59 1996  Stan Shebs  <[email protected]>

        * mpw-config.in: Add wildcards for config matching, add mips-*-*
        case, forward-include bfd/elf-bfd.h.

Thu Aug 15 13:24:30 1996  Martin M. Hunt  <[email protected]>

        * config/tc-d10v.c: Add additional information to the opcode
        table to help determinine which instructions can be done
        in parallel. 

Thu Aug 15 17:01:31 1996  James G. Smith  <[email protected]>

        * config/tc-arm.c: Major changes to add Thumb support, with lots
        of change input from <[email protected]>.
        Reverted to INSN_SIZE macro, rather than insn_size variable.
        (insns): Added ARM "bx" instruction support.
        (tinsns): Added Thumb instruction definition structure.
        (arm_tops_hsh): Added hash structure for Thumb opcodes.
        (md_pseudo_table): Added ".arm", ".thumb" and ".code" pseudo-ops.
        (opcode_select,s_arm,s_thumb,s_code): Added.
        (decode_shift): Allow upper-case RRX.
        (do_ldst): Simpler halfword support.
        (do_ldmstm): Improved.
        (reg_list, do_bx, thumb_reg, thumb_add_sub, thumb_shift,
        thumb_mov_compare, thumb_load_store, do_t_arit, do_t_add,
        do_t_asr, do_t_branch, do_t_bx, do_t_compare, do_t_ldmstm,
        do_t_ldrb, do_t_ldrh, do_t_lds, do_t_lsl, do_t_lsr, do_t_mov,
        do_t_push_pop, do_t_str, do_t_strb, do_t_strh, do_t_sub, do_t_swi,
        do_t_adr): Added.
        (md_apply_fix3): Add support for BFD_RELOC_ARM_THUMB_* relocations.
        (md_parse_option): Add support for -mthumb.
        (md_show_usage): Updated to reflect new command line option.
        (arm_data_in_code, arm_canonicalize_symbol_name): Added.
        * config/tc-arm.h: Provide TC_FIX_TYPE to allow private ARM
        fragment information to be held.

Thu Aug 15 16:12:00 1996  Richard Earnshaw ([email protected])

        * config/tc-arm.c (md_apply_fix3): Also set fixP->fx_done if fx_addsy is 
        non-null, but is a constant.
        (fix_new_arm): Call make_expr_symbol to make the expression symbol
        so that error reporting will work correctly.

Wed Aug 14 10:37:21 1996  Ian Lance Taylor  <[email protected]>

        * config/tc-i386.c (tc_i386_fix_adjustable): Don't adjust relocs
        against weak symbols.

Tue Aug 13 17:39:24 1996  Ian Lance Taylor  <[email protected]>

        * config/tc-ppc.h (TC_FORCE_RELOCTION): Define if OBJ_XCOFF.
        (ppc_force_relocation): Declare if OBJ_XCOFF.
        * config/tc-ppc.c (ppc_force_relocation): New function if
        OBJ_XCOFF.

Mon Aug 12 16:49:43 1996  Ian Lance Taylor  <[email protected]>

        * config/tc-mips.h (BYTE_ORDER): Don't define.  No longer used.

Fri Aug  9 17:48:28 1996  Martin M. Hunt  <[email protected]>

        * config/tc-d10v.c: Fix problem with relocs. 

Fri Aug  9 14:16:14 1996  Ian Lance Taylor  <[email protected]>

        * config/tc-sh.c (sh_do_align): If not BFD_ASSEMBLER, always align
        with nops if not in data_section or bss_section.

Thu Aug  8 12:32:56 1996  Klaus Kaempf  <[email protected]>

        Add support for openVMS/Alpha.
        * as.h (PRINTF_LIKE): Don't define if VMS, for now.
        * config/obj-evax.c: New file.
        * config/obj-evax.h: New file.
        * config/tc-alpha.c: Add support for EVAX format if OBJ_EVAX is
        defined.
        * config/tc-alpha.h: Add support for EVAX format if OBJ_EVAX is
        defined.  Add case for bfd_target_evax_flavour.
        * config/vms-a-conf.h: New file.
        * conf-a-gas.com: New file.
        * configure.in: Add target alpha-*-*vms*.
        * configure: Rebuild.
        * makefile.vms: New file.
        * read.c (s_lcomm): Align bss_seg on 8 byte boundary if OBJ_EVAX.
        Don't call ffs on openVMS/Alpha.

Wed Aug  7 14:19:03 1996  Philippe De Muyter  <[email protected]>

        * configure.in: Make GAS_CHECK_DECL_NEEDED include <string.h> or
        <strings.h> if they exist.  Call GAS_CHECK_DECL_NEEDED on strstr
        and sbrk.
        * acconfig.h (NEED_DECLARATION_STRSTR): New macro.
        (NEED_DECLARATION_SBRK): New macro.
        * configure, conf.in: Rebuild.
        * as.h: Only include <strings.h> if HAVE_STRINGS_H.
        (strstr): Declare if NEED_DECLARATION_STRSTR.
        * as.c: If HAVE_SBRK and NEED_DECLARATION_SBRK, declare sbrk.

Wed Aug  7 11:50:26 1996  Ian Lance Taylor  <[email protected]>

        * symbols.c (resolve_symbol_value): Handle addition or subtraction
        by a constant before entering the main switch.  Reject attempts to
        apply an arithmetic function to non-absolute symbols, except for
        the special case of subtraction of two symbols in the same
        section.

        * config/tc-mips.c (md_section_align): Do align if OBJ_ELF, but
        not to more than a 16 byte boundary.

        * config/tc-i386.c (tc_gen_reloc): Accept all relocs; remove
        #ifndef OBJ_ELF lines.  From Eric Valette <[email protected]>.
        (tc_gen_reloc): If out of memory call as_fatal rather than
        assert.  If no howto found, call as_bad_where rather than
        as_fatal.  Change the error message slightly.  Set howto to a
        non-NULL value in order to keep going.

Tue Aug  6 12:58:03 1996  Martin M. Hunt  <[email protected]>

        * config/tc-d10v.c: Added code to support 32-bit fixups for stabs.

Tue Aug  6 11:15:26 1996  Jeffrey A Law  ([email protected])

        * config/tc-h8300.c (get_specific): New operand "size" derived
        from ".b", ".w" and ".l" extensions.  All callers changed.  If
        the base instruction has no operands, then use the size to
        determine which specific instruction to use.

Mon Aug  5 14:21:10 1996  Ian Lance Taylor  <[email protected]>

        * config/tc-i960.c (mem_fmt): Call parse_expr before emit.

Fri Aug  2 11:23:31 1996  Ian Lance Taylor  <[email protected]>

        * config/tc-mips.c (md_section_align): Don't change addr if
        OBJ_ELF.

Thu Aug  1 23:51:52 1996  Jeffrey A Law  ([email protected])

        * config/tc-hppa.c: Revert yesterday's changes.
        
Wed Jul 31 14:46:11 1996  Martin M. Hunt  <[email protected]>

        * config/tc-d10v.c: Disable range checking on 16-bit values.

Wed Jul 31 16:27:19 1996  Ian Lance Taylor  <[email protected]>

        * config/tc-m68k.c (m68k_ip): Set ok_arch for every instruction,
        not just the ones that don't match.

Wed Jul 31 11:45:15 1996  Martin M. Hunt  <[email protected]>

        * config/tc-d10v.c: Fixed bugs in short relocs and range checking.

Wed Jul 31 15:41:42 1996  James G. Smith  <[email protected]>

        * config/tc-arm.c: Changed INSN_SIZE to variable insn_size, as
        pre-cursor to adding Thumb support. Also added cpu_variant flag
        information to each of the asm_flg structures.
        (md_parse_option): Updated ARM7 parsing to allow 't' for
        thumb/halfword support, aswell as 'm' for long multiply.
        (md_show_usage): Updated help message.
        (md_assemble): Check that instruction flags are applicated to the
        current cpu variant.
        (md_apply_fix3, tc_gen_reloc): Add BFD_RELOC_ARM_OFFSET_IMM8 and
        BFD_RELOC_ARM_HWLITERAL relocation support for new halfword and
        signextension instructions.
        (do_ldst): Generate halfword and signextension variants if
        mnemonic flags match.
        (ldst_extend): Do not allow shifts in the offset field of halfword
        or signextension instructions.
        (validate_offset_imm): Provide check on halfword and signextension
        immediate range.
        (add_to_lit_pool): Merge identical literal pool values.

Tue Jul 30 14:28:23 1996  Jeffrey A Law  ([email protected])

        * config/tc-hppa.c (selector_table): Add 'E' selector.
        (cons_fix_new_hppa): Don't coke on e_esel.
        (tc_gen_reloc, SOM version): Handle R_COMP2 when used
        to help generate exception handling tables.
        (md_apply_fix): Don't try to apply fixups with an e_esel
        selector.
        (hppa_fix_adjustable): Fixups with e_esel selectors
        are not adjustable.

Tue Jul 30 15:51:41 1996  Ian Lance Taylor  <[email protected]>

        * config/tc-sparc.c (md_pseudo_table): Add 2byte, 4byte, and 8byte
        pseudo-ops.

Fri Jul 26 11:43:03 1996  Martin M. Hunt  <[email protected]>

        * config/tc-d10v.c: Added lots of error checking.  Added hacks
        to support accumulator shifts.
        
Fri Jul 26 11:56:08 1996  Ian Lance Taylor  <[email protected]>

        * symbols.c (S_SET_EXTERNAL): Let .weak override.
        (S_CLEAR_EXTERNAL): Likewise.
        (S_SET_WEAK): Remove error; just let .weak override.

Thu Jul 25 15:22:51 1996  Martin M. Hunt  <[email protected]>

        * config/tc-d10v.c (md_assemble): Now handles multiline
        instructions.

Thu Jul 25 12:03:33 1996  Martin M. Hunt  <[email protected]>

        * config/tc-d10v.c: Fix packaging bug. Added range checking.
        Added kludge for divs instruction.  Fixed minor problem with
        multiple text sections.
        * config/tc-d10v.h (d10v_cleanup): Change prototype. 
        
Tue Jul 23 10:49:36 1996  Martin M. Hunt  <[email protected]>

        * config/tc-d10v.c (md_apply_fix3): Fix all instruction
        addresses to be right-shifted by 2.

Mon Jul 22 11:32:36 1996  Martin M. Hunt  <[email protected]>

        * config/tc-d10v.c: Many changes to get relocs working.
        (register_name): No longer creates a symbol for register names.
        (pre_defined_registers): moved to opcodes/d10v-opc.c.
        (d10v_insert_operand): Now works correctly for either container.
        * config/tc-d10v.h (d10v_cleanup): Declare. 
        
Mon Jul 22 14:01:33 1996  Ian Lance Taylor  <[email protected]>

        * config/tc-mips.c (tc_gen_reloc): BFD_RELOC_PCREL_HI16_S and
        BFD_RELOC_PCREL_LO16 are expected to be PC relative.

Mon Jul 22 12:46:55 1996  Richard Henderson  <[email protected]>

        * config/tc-alpha.c: Patches to track current minimum alignment to reduce
        the number of fragments created with frag_align.
        (alpha_current_align): New static variable.
        (s_alpha_text): Reset alignment to 0.
        (s_alpha_data, s_alpha_rdata, s_alpha_sdata): Likewise.
        (s_alpha_stringer, s_alpha_space): New functions.
        (s_alpha_cons, alpha_flush_pending_output): Remove functions.
        (alpha_cons_align): New function to replace both of them.
        (emit_insn): Only align if alpha_current_align is less than 2;
        reset alpha_current_align to 2.
        (s_alpha_gprel32): Likewise.
        (s_alpha_section): New function.  Basically duplicate the other
        alpha section change hooks.  Only define for ELF.
        (s_alpha_float_cons): Simplify alignment handling.
        (md_pseudo_table): Only define "rdata" and "sdata" if OBJ_ECOFF.
        If OBJ_ELF, define "section", "section.s", "sect", and "sect.s".
        Don't define the s_alpha_cons pseudo-ops.  Do define
        s_alpha_stringer and s_alpha_space pseudo-ops.
        (alpha_align): Skip if less than current default alignment.  Set
        default alignment.
        * config/tc-alpha.h (md_flush_pending_output): Remove.
        (md_cons_align): Add.

        * config/tc-alpha.c: Add oodles of function description comments.
        (md_bignum_to_chars): Remove; there are no callers.
        (md_show_usage): Mention some more variants.

Thu Jul 18 15:54:54 1996  Ian Lance Taylor  <[email protected]>

        From Andrew Gierth <[email protected]>:
        * configure.in (sparc-*-sysv4*): New target.
        * configure: Rebuild.

        * config/tc-sparc.c (md_pseudo_table): Change uahalf, uaword, and
        uaxword to use s_uacons.
        (sparc_no_align_cons): New static variable.
        (s_uacons): New static function.
        (sparc_cons_align): If sparc_no_align_cons is set, just clear it
        and return.

        * config/tc-sparc.c (s_common): Remove unused label allocate_bss.

        * configure.in: Add mips-*-irix6* target.  Handle Irix 6 like Irix
        5 with regard to shared libraries.
        * configure: Rebuild.

        * config/tc-m68k.c (m68k_ip): Use the correct length when
        allocating space for the unsupported architecture error message.

Thu Jul 18 12:57:10 1996  Michael Meissner  <[email protected]>

        * configure.in (d10v-*-*): Allow d10v-*-*, don't require d10v-*-elf*.

Wed Jul 17 14:25:13 1996  Martin M. Hunt  <[email protected]>

        * config/tc-d10v.c: New file.
        * config/tc-d10v.h: New file.
        * configure (d10v-*-elf): New target.
        * configure.in (d10v-*-elf): New target.
        
Fri Jul 12 20:54:19 1996  Michael Meissner  <[email protected]>

        * config/tc-ppc.c (md_parse_option): Recognize -K PIC.

Wed Jul 10 12:39:08 1996  Richard Henderson  <[email protected]>

        * config/tc-alpha.c (alpha_align): Change fill parameter
        to a pointer.  Take NULL as 0 or nop depending on section.  Change
        all callers.
        (s_alpha_align): Rename local variables.

        * doc/as.texinfo (.align): Document action of omitted
        fill parameter.

Wed Jul 10 00:23:30 1996  Ian Lance Taylor  <[email protected]>

        * config/tc-ppc.c (md_apply_fix3): Give a useful error message
        when an unsupported PC relative reloc is seen, rather than calling
        abort.

        * app.c (do_scrub_chars): Remove not_cpp_line local variable.
        Instead, check state when '#' comment is seen.

Mon Jul  8 14:11:49 1996  Ian Lance Taylor  <[email protected]>

        * config/tc-mips.c (mips_regmask_frag): Only define if OBJ_ELF or
        OBJ_MAYBE_ELF.
        (tc_gen_reloc): If fixup was changed to be PC relative, change
        reloc type accordingly.  Use name of reloc in error message.

        * as.h: Don't define const or volatile.
        * flonum.h: Don't define const.

        * config/tc-m68k.c (tc_gen_reloc): Change the code appropriately
        if fx_pcrel is set.  Correct setting the addend case in the
        OBJ_ELF case (from Andreas Schwab
        <[email protected]>).
        (md_show_usage): Correct -mfc5200 to -m5200.

Fri Jul  5 10:32:58 1996  J.T. Conklin  <[email protected]>

        * doc/c-m68k.texi: Document -m5200 flag.
        * doc/as.texinfo: Likewise.

        * config/tc-m68k.c (m68k_ip): The coldfire does not support 8x
        scale factor.

Fri Jul  5 11:07:24 1996  Ian Lance Taylor  <[email protected]>

        * symbols.c (S_SET_EXTERNAL): Change as_warn to as_bad.
        (S_CLEAR_EXTERNAL, S_SET_WEAK): Likewise.

Thu Jul  4 11:59:46 1996  Ian Lance Taylor  <[email protected]>

        * Makefile.in (VERSION): Set to cygnus-2.7.1.

        * Released binutils 2.7.

Thu Jul  4 10:11:33 1996  James G. Smith  <[email protected]>

        * config/tc-mips.c (mips_ip): Only perform range check when
        dealing with O_constant expressions.

Wed Jul  3 15:02:21 1996  J.T. Conklin  <[email protected]>

        * m68k-parse.h (m68k_register): Add new coldfile control
        registers.

        * config/tc-m68k.c (mcf5200_control_regs): New variable, 
        array of control registers for the coldfire.
        (cpu_of_arch): Added mcf5200.
        (archs): Added mcf5200.
        (init_table): Add new control registers.
        (m68k_ip): Added support for new control registers.
        (m68k_init_after_args): Likewise.

        * config/tc-m68k.c (md_show_usage): Add -m5200 to usage text.

Wed Jul  3 16:05:50 1996  Ian Lance Taylor  <[email protected]>

        * read.h (is_it_end_of_statement): Declare.
        * read.c (is_it_end_of_statement): Remove declaration.

        * config/tc-ppc.c (ppc_elf_suffix): Correct parenthesization of ||
        within &&.
        (md_assemble): Fix handling of @l with an unsigned constant.  Add
        default case to reloc switch.

        * config/tc-i386.h (AOUT_MACHTYPE): Define as 0 if TE_386BSD.

        Based on patches from Tom Quiggle <[email protected]>:
        * ecoff.c (last_lineno): New static variable.
        (add_procedure): Set last_lineno.
        (ecoff_directive_loc): Likewise.
        (ecoff_generate_asm_lineno): Likewise.
        (ecoff_fix_loc): New function.
        * ecoff.h (ecoff_fix_loc): Declare.
        * config/tc-mips.c (append_insn): When inserting nops, and using
        ECOFF debugging, call ecoff_fix_loc.

Tue Jul  2 23:02:12 1996  Jeffrey A Law  ([email protected])

        * config/tc-h8300.c (build_bytes): If an operand type is 
        marked as SRC_IN_DST retrieve it from the "destination" op.

Sat Jun 29 13:38:31 1996  Ian Lance Taylor  <[email protected]>

        * configure.in (arm-*-riscix*): Set emulation to riscix.
        * configure: Rebuild.
        * config/te-riscix.h: New file to define TE_RISCIX.

        * config/tc-sh.h (SUB_SEGMENT_ALIGN): Define.

Fri Jun 28 15:14:31 1996  Ian Lance Taylor  <[email protected]>

        * Makefile.in (config.status): Just run config.status as other
        tools do.

Fri Jun 28 11:09:38 1996  Stan Shebs  <[email protected]>

        * mpw-config.in (TARGET_OS): Add definition to conf.

Thu Jun 27 20:39:40 1996  James G. Smith  <[email protected]>

        * config/tc-mips.c (append_insn): Parenthesize
        cop_interlocks expressions.

Thu Jun 27 12:18:26 1996  Ian Lance Taylor  <[email protected]>

        * listing.c (listing_print): Close the listing file if it is not
        stdout.  Close the other files opened for the listing.

        * config/tc-sparc.h (md_cons_align): Define.
        (sparc_cons_align): Declare.
        (HANDLE_ALIGN): Define.
        (sparc_handle_align): Declare.
        * config/tc-sparc.c (sparc_cons_align): New function.
        (sparc_handle_align): New function.
        * read.c (cons_worker): Call md_cons_align if it is defined.

        * as.h (struct frag): Add fr_file and fr_line fields.
        * frags.c (frag_new): Set fr_file and fr_line.
        (frag_var): Likewise.
        (frag_variant): Likewise.

        * as.h (struct frag): Remove unused align_mask and align_offset
        fields.

        * listing.c (calc_hex): Offset by fr_fix when examining fr_var.
        From <[email protected]>.

Wed Jun 26 13:21:34 1996  Ian Lance Taylor  <[email protected]>

        * configure.in (mips-*-osf*): New target.
        * configure: Rebuild.

        * config/tc-m68k.c: Add 68ec060 as a synonym for 68060.

Wed Jun 26 16:23:08 1996  James G. Smith  <[email protected]>

        * config/tc-mips.c: Added cop_interlocks, to avoid NOP insertion
        between co-processor comparisons and branches for the VR4300.

Mon Jun 24 18:02:50 1996  Jason Molenda  ([email protected])

        * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
        INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
        (docdir): Removed.
        * configure.in (AC_PREREQ): autoconf 2.5 or higher.
        * doc/Makefile.in (bindir, libdir, datadir, mandir, infodir,
        includedir): Use autoconf set values.
        (docdir): Removed.

Mon Jun 24 11:58:14 1996  Ian Lance Taylor  <[email protected]>

        * listing.c (listing_eject): Don't do anything if listing is 0.
        (listing_list): Likewise.
        (listing_source_line): Likewise.
        (listing_title): Don't save title if listing is 0.
        (listing_source_file): Check listing rather than listing_tail.

        * configure.in: On alpha*-*-osf*, link against libbfd.a if not
        using shared libraries.
        * configure: Rebuild.

Fri Jun 21 18:22:23 1996  Ian Lance Taylor  <[email protected]>

        * config/tc-mips.c (mips_ip): In case 'i'/'j', don't require an
        absolute expression if a relocation type was specified.

Fri Jun 21 17:40:16 1996  Joel Sherrill  <[email protected]>

        * configure.in: Add support for *-*-rtems* configurations.
        * configure: Rebuild.

Fri Jun 21 16:01:18 1996  Richard Henderson  <[email protected]>

        * configure.in: Add alpha-*-linuxecoff* target.  Use elf for
        alpha-*-linux* target.  Force bfd_gas for alpha-*.  Require
        opcodes library for alpha.
        * configure: Rebuild with autoconf 2.10.
        * config/tc-alpha.c: Substantial rewrite to add ELF support and
        use new opcode table.
        * config/tc-alpha.h (md_undefined_symbol): Don't define.
        (LOCAL_LABEL): Define differently if OBJ_ELF.
        (FAKE_LABEL_NAME): Define if OBJ_ELF.
        * config/alpha-opcode.h: Remove.
        * config/obj-elf.h: If TC_ALPHA, define ECOFF_DEBUGGING.
        * Makefile.in (TARG_CPU_DEP_alpha): Depend upon
        include/opcode/alpha.h rather than config/alpha-opcode.h.

Thu Jun 20 19:10:28 1996  Ian Lance Taylor  <[email protected]>

        * config/obj-aout.c (obj_emit_relocations): Give an error if the
        relocation symbol was not resolved.
        * config/obj-coff.c (do_relocs_for): Likewise.

        * write.c (adjust_reloc_syms): Refetch the symbol section after
        calling S_GET_VALUE, since it may have changed.

        * expr.c (struct expr_symbol_line): Define.
        (expr_symbol_lines): New static variable.
        (make_expr_symbol): Add entry to expr_symbol_lines.
        (expr_symbol_where): New function.
        * expr.h: Use extern on function declarations.
        (expr_symbol_where): Declare.
        * symbols.c (resolve_symbol_value): Try to use expr_symbol_where
        rather than printing the meaningless name of an expression
        symbol.

Thu Jun 20 15:57:41 1996  Ken Raeburn  <[email protected]>

        * config/tc-i386.c (md_number_to_chars): Deleted.
        * config/tc-i386.h (md_number_to_chars): New macro.

        * config/tc-alpha.c (build_operate_n, build_mem): Moved earlier in
        the file.
        (load_symbol_address, load_expression): Use build_mem.
        (build_operate): New function.
        (emit_addq_r): Use it.

        Wed Mar 13 22:14:14 1996  Pat Rankin  <[email protected]>

        * symbols.c (colon):  #if VMS, use S_SET_OTHER to store `const_flag'.

        Tue Mar  5 14:31:45 1996  Pat Rankin  <[email protected]>

        * config/tc-vax.h (NOP_OPCODE): Define.

        Sun Feb  4 21:01:03 1996  Pat Rankin  <[email protected]>

        * config/obj-vms.h (S_IS_COMMON): Define.
        (S_IS_LOCAL): Check for \002 as well as \001.
        (LONGWORD_ALIGNMENT): New macro.
        (SUB_SEGMENT_ALIGN): Use it.

        Fri Jan 26 17:44:09 1996  Pat Rankin  <[email protected]>

        * config/vms-conf.h: Reconcile with conf.in.

Wed Jun 19 11:31:50 1996  Ian Lance Taylor  <[email protected]>

        * write.c (is_dnrange): Only define if TC_GENERIC_RELAX_TABLE is
        defined.

        * doc/as.texinfo: Document that any number of hex digits can
        follow \x.

        * as.c (struct defsym_list): Define.
        (defsyms): New static variable.
        (parse_args): Just put --defsym arguments on defsyms list, rather
        than defining them.
        (main): Define defsyms after output file is created.

        * config/tc-m68k.c (m68k_ip): Reject PRE and POST indexing mode on
        cpu32.  From Eric Norum <[email protected]>.

        * config/tc-mips.c (mips_ip): In cases 'I', 'i', and 'j', set
        insn_error rather than calling check_absolute_expr.

        * as.c (emulation_name): Remove unused static variable.
        (default_emul_bfd_name): Add return NULL to avoid warning.
        * ecoff.c (ecoff_stab): Remove unused variables name and
        name_end.
        * frags.c (frag_new): Remove unused variable tmp.
        * hash.c (hash_grow): Parenthesize + within <<.
        (hash_print_statistics): Use %lu, not %d, to print unsigned
        long variables.
        * messages.c: Include "libiberty.h".
        (fprint_value): Add cast to avoid printf warning.
        (sprint_value): Likewise.
        * read.c: Include "ecoff.h".
        (emit_expr): Add casts to avoid printf warnings.
        * read.h: Use extern for function declarations.
        (pop_insert): Declare.
        * stabs.c: Include "ecoff.h".
        * subsegs.c (subseg_set_rest): Remove unused variables tmp,
        former_last_fragP, and new_fragP.
        * subsegs.h (subsegs_print_statistics): Declare.
        * symbols.c (debug_verify_symchain): Change macro to discard
        arguments.
        * write.c (dump_section_relocs): Likewise.
        * write.h: Use extern for function declarations.
        (write_print_statistics): Declare.
        * config/e-mipsecoff.c (mipsecoff_bfd_name): Return NULL to avoid
        warning.
        * config/e-mipself.c (mipself_bfd_name): Likewise.
        * config/obj-elf.h (elf_ecoff_set_ext): Declare.

        * config/tc-sparc.h (TC_RELOC_RTSYM_LOC_FIXUP): If OBJ_ELF, always
        emit relocations against external symbols.

        * config/tc-alpha.c (tc_gen_reloc): Output a sensible error
        message if bfd_reloc_type_lookup fails, rather than calling
        assert.

        * config/tc-alpha.c (alpha_force_relocation): Add
        BFD_RELOC_12_PCREL to switch.

Tue Jun 18 20:29:57 1996  Doug Evans  <[email protected]>

        * config/tc-i386.h (LOCAL_LABEL,FAKE_LABEL_NAME): Use defaults for
        TE_PE (Lfoo, not .Lfoo).

Tue Jun 18 17:13:33 1996  Ian Lance Taylor  <[email protected]>

        * read.c (s_fill): Don't warn about a zero repeat count.

        * config/tc-mips.c (mips_ip): Don't warn about using AT as a
        coprocessor register.

        * config/tc-i386.c (md_assemble): When checking the size of a
        register to set the size of an instruction, do a bitwise and with
        Reg8 and Reg16 rather than requiring the type to be exactly Reg8
        or Reg16.

Tue Jun 18 13:19:51 1996  Jeffrey A. Law  <[email protected]>

        * config/tc-h8300.c (parse_reg): Tweak error messages.
        (build_bytes): Likewise.
        (skip_colonthing): Handle :32 suffix.
        (get_specific): Promote L_24 to L_32 if it makes a match.
        Don't always promote L_8 to L_16.
        (do_a_fix_imm): Clean up L_32 and L_24 handling.

        * config/tc-h8300.c (Smode): New variable.
        (h8300hmode): Turn off Hmode.
        (h8300smode): New function.  Turn on Smode and Hmode.
        (md_pseudo_table): New ".h8300s" pseudo-op.
        (parse_reg): Handle "exr" register.
        (get_operand): Handle bizarre syntax for "stm.l" and "ldm.l".
        Handle "mach" and "machl" operands for ldmac.
        (get_specific): Handle "stm.l" and "ldm.l".
        (build_bytes): Handle "stm.l" and "ldm.l"; handle MACREG operands.
        * config/tc-h8300.h (COFF_MAGIC): Handle H8/S magic number.
        (Smode): Declare.

Mon Jun 17 15:50:53 1996  J.T. Conklin  <[email protected]>

        * doc/as.texinfo: Reorder chapter of machine dependent options so
        that it is sorted by chip name.  

        * doc/as.texinfo: Use consistant spelling of Vax.
        * doc/c-vax.texi: Likewise.

Mon Jun 17 11:26:56 1996  Jeffrey A. Law  <[email protected]>

        * config/tc-hppa.c (md_pseudo_table): Add ".begin_try" and ".end_try"
        pseudo ops.
        (tc_gen_reloc, SOM version): Handle R_BEGIN_TRY and R_END_TRY.
        (md_apply_fix): Likewise.
        (pa_try): New function.
        (hppa_force_relocation): Force relocs for BEGIN_TRY and END_TRY.

Sun Jun 16 22:57:47 1996  Jeffrey A. Law  <[email protected]>

        * config/tc-hppa.c (md_pseudo_table): Add ".level" pseudo op.
        (pa_level): New function.

Fri Jun 14 20:06:44 1996  Ian Lance Taylor  <[email protected]>

        * listing.c (listing_newline): Don't do anything if listing is 0.

Thu Jun 13 17:50:54 1996  Ian Lance Taylor  <[email protected]>

        * subsegs.c (section_symbol): If symbol_table_frozen is set, call
        symbol_create, not symbol_new.

Wed Jun 12 14:10:44 1996  Ian Lance Taylor  <[email protected]>

        * write.c (adjust_reloc_syms): Don't set sy_used_in_reloc for an
        absolute symbol unless TC_FORCE_RELOCATION returns true.

        * config/obj-coff.c (previous_file_symbol): Remove BFD_ASSEMBLER
        version.
        (c_dot_file_symbol): BFD_ASSEMBLER version: Don't set the value of
        the symbol to a pointer.  Don't set previous_file_symbol.
        Simplify symbol list rearrangement.
        (coff_frob_symbol): Don't do anything with C_FILE symbols.
        (coff_adjust_symtab): Don't check previous_file_symbol.

Mon Jun 10 14:52:29 1996  Michael Meissner  <[email protected]>

        * config/tc-ppc.c (ppc_elf_lcomm): New function for .lcomm
        directive.
        (md_pseudo_table): Add ppc_elf_lcomm.

Mon Jun 10 11:45:51 1996  Ian Lance Taylor  <[email protected]>

        * config/tc-m68k.c (m68k_ip): Accept ABSL for 'O', so that `bfextu
        d0{24:1},d0' works without an immediate prefix on the bit numbers.
        (md_begin): Add digits to alt_notend_table.
        (md_parse_option): Make s a const pointer.

        * config/tc-sparc.c (md_pseudo_table): Add "empty".
        (s_empty): New static function.

        * config/obj-coff.c (struct filename_list): Only define if not
        BFD_ASSEMBLER.
        (filename_list_head, filename_list_tail): Likewise.
        (c_section_symbol): Remove unused BFD_ASSEMBLER version.
        (obj_coff_endef, BFD_ASSEMBLER version): Don't set the debugging
        flag for C_MOS, C_MOE, C_MOU, or C_EOS symbols, since they should
        have a section of N_ABS rather than N_DEBUG.  If we do a merge,
        remove the new symbol from the list.
        (obj_coff_endef, both versions): Call tag_insert even if there is
        an old symbol with the same name, if the old symbol does not
        happen to be a tag.
        (coff_frob_symbol): Check SF_GET_TAG, C_EOF, and C_FILE outside of
        the SF_GET_DEBUG condition.  Don't call SA_SET_SYM_ENDNDX with a
        symbol that will be moved to the end of the symbol list.
        (coff_adjust_section_syms): Always call section_symbol for .text,
        .data, and .bss.
        (coff_frob_section): Likewise.  Also, remove unused variable
        strname.

        * config/tc-ns32k.c (convert_iif): Call frag_grow rather than
        manipulating frags directly.
        (md_number_to_field): Adjust mem_ptr correctly if ENDIAN is
        defined.

        * app.c (do_scrub_chars): If '/' is LINE_COMMENT_START, check
        whether the next character is '*' before checking whether we are
        at the start of a line.  Permit LINE_COMMENT_START to start a
        comment in state 1 (seen some whitespace) as well, to match the
        documentation.

        * gasp.c (do_align): Permit a fill value for .align.

Wed Jun  5 17:09:26 1996  Ian Lance Taylor  <[email protected]>

        * read.c (next_char_of_string): Warn if a newline is seen in the
        middle of a string.  Call bump_line_counters when appropriate.

Wed Jun  5 17:08:36 1996  Richard Henderson  <[email protected]>

        * symbols.c (colon): Use LOCAL_LABEL.

Tue Jun  4 10:55:16 1996  Tom Tromey  <[email protected]>

        * Makefile.in (install): Don't check to see if tooldir exists.
        Make $(tooldir) and $(tooldir)/bin.

Tue Jun  4 10:14:53 1996  Michael Meissner  <[email protected]>

        * config/ppc-sol.mt (TDEFINES): Don't turn on -mregnames by
        default.

Mon Jun  3 11:34:41 1996  Ian Lance Taylor  <[email protected]>

        * config/tc-mips.c (mips_ip): Don't call as_warn if we are setting
        insn_error.  Don't put the string "ERROR" in insn_error.  Set
        insn_error rather than calling as_warn for an unsupported opcode.

Sat Jun  1 21:51:55 1996  Ian Lance Taylor  <[email protected]>

        * config/tc-mips.c (md_parse_option): Check for a 64 bit format
        before permitting -64.
        * output-file.c (output_file_create): Remove duplicate
        bfd_perror.

Fri May 31 01:08:06 1996  Ian Lance Taylor  <[email protected]>

        * config/tc-mips.c (md_begin): If -64, create a .MIPS.options
        section rather than a .reginfo section.
        (mips_elf_final_processing): If -64, write out 64 bit RegInfo
        information.

        * config/tc-mips.c (load_register): If mips_isa < 3, permit a 32
        bit value with the high bit set.

Thu May 30 19:00:19 1996  Ian Lance Taylor  <[email protected]>

        * read.c (s_lcomm): Set section flags for .sbss section.

        * config/tc-mips.c (mips_64): New static variable.
        (mips_target_format): If mips_64, return elf64 targets rather than
        elf32 ones.
        (md_longopts): Add "32" and "64".
        (md_parse_option): Handle -32 and -64.
        (md_show_usage): Mention -32 and -64.
        (cons_fix_new_mips): If mips_64, don't convert an 8 byte reloc to
        a 4 byte one.

Thu May 30 10:36:19 1996  Michael Meissner  <[email protected]>

        * config/tc-ppc.c (comment_chars): Make '!' a comment character
        for Solaris compatibility.

        * stabs.c (s_stab_generic): Under PowerPC Solaris, convert a
        .stabd with 4 arguments into a .stabn.

Wed May 29 16:43:16 1996  Ian Lance Taylor  <[email protected]>

        * config/tc-mips.c (macro): When passing X_add_number to
        macro_build, cast it to int first.

Tue May 28 13:29:39 1996  Ian Lance Taylor  <[email protected]>

        * config/tc-z8k.c (md_apply_fix): Handle fx_r_type of 0, as
        created by emit_expr.

        * symbols.c (symbol_create): If bfd_make_empty_symbol fails, call
        as_perror rather than assert.

Fri May 24 18:24:11 1996  Ian Lance Taylor  <[email protected]>

        * config/tc-mips.c (mips_ip): Mark sections created to hold
        floating point information as read only.

Fri May 24 12:07:54 1996  David Edelsohn  <[email protected]>

        * config/tc-ppc.c (ppc_set_cpu): Change defaults to match AIX.

Thu May 23 17:34:24 1996  Michael Meissner  <[email protected]>

        * read.c (potable): Add .skip as a synonym for .space.

        * stabs.c (s_stab_generic): For PowerPC ELF, allow .stabd to take
        4 arguments, providing the 4th argument is 0, to allow
        compatibility with the Solaris assembler.

Thu May 16 15:51:48 1996  Ian Lance Taylor  <[email protected]>

        * config/tc-sh.h (struct sh_segment_info_type): Define.
        (TC_SEGMENT_INFO_TYPE): Define.
        (sh_frob_label): Declare.
        (tc_frob_label): Define.
        (sh_flush_pending_output): Declare.
        (md_flush_pending_output): Define.
        * config/tc-sh.c (md_assemble): If relaxing, emit a R_SH_CODE
        reloc before the instruction if necessary.
        (sh_frob_label): New function.
        (sh_flush_pending_output): New function.
        (sh_coff_frob_file): Ignore ALIGN, CODE, DATA, and LABEL relocs
        when looking for the reloc for the target of .uses.
        (md_convert_frag): Fix printf format (%0xlx to 0x%lx).
        (sh_force_relocation): Force CODE, DATA, and LABEL relocs to be
        emitted.
        (md_apply_fix): Ignore CODE, DATA, and LABEL relocs.
        (sh_coff_reloc_mangle): Force CODE, DATA, and LABEL relocs to use
        the absolute symbol.

        * subsegs.h (segment_info_type): Add tc_segment_info_data field if
        TC_SEGMENT_INFO_TYPE is defined.

Wed May 15 12:23:53 1996  Ian Lance Taylor  <[email protected]>

        * config/tc-i386.c (md_assemble): Make sure the opcode suffix
        matches the register size.

Wed May 15 08:33:37 1996  Jeffrey A Law  ([email protected])

        * config/obj-coff.c (count_entries_in_chain): Ignore Fixups with
        fx_done set. 
        (do_relocs_for): Likewise.
        (fixup_segment): Don't just quit if linkrelax is set.  Try to
        apply non pc-relative sym1-sym2 fixups, even if linkrelax is
        nonzero.

Fri May 10 14:16:59 1996  Michael Meissner  <[email protected]>

        * config/tc-ppc.c (ppc_elf_validate_fix): Allow GOT and section
        relative relocations with -mrelocatable.  Also allow unfixed
        relocs in .ex_shared.

Tue May  7 11:24:10 1996  Ian Lance Taylor  <[email protected]>

        * config/obj-coff.c (yank_symbols): Check that FNAME_OFFSET is
        non-zero before assuming this is a long file name.
        (w_strings): Likewise.
        (c_dot_file_symbol): Set FNAME_OFFSET to 1 for a long file name.

        * config/obj-coff.c (w_strings): Move declaration of i inside
        #ifdef block which uses it.

Tue May  7 00:49:58 1996  Jeffrey A Law  ([email protected])

        * config/tc-h8300.c (do_a_fix_imm): Rename last argument to
        "relaxmode".  Output relocs which identify various relaxing
        possibilities for mov.[bwl] instructions.
        (build_bytes): Pass in a relaxing mode to do_a_fix_imm.

Mon May  6 15:26:28 1996  Doug Evans  <[email protected]>

        * config/tc-arm.h (TC_HANDLES_FX_DONE): Define.
        (MD_APPLY_FIX3): Define.
        * config/tc-arm.c (my_get_expression): Only watch for bad segments
        if OBJ_AOUT.
        (md_apply_fix3): Renamed from md_apply_fix.
        If pcrel reloc and symbol is in different section, undo effects
        of md_pcrel_from.

Sat May  4 12:49:35 1996  Jeffrey A Law  ([email protected])

        * config/tc-hppa.c (hppa_fix_adjustable): Don't adjust
        any reloc with an LR% or RR% field selector for SOM.

Sat May  4 11:26:19 1996  Ian Lance Taylor  <[email protected]>

        * Makefile.in: Add subsegs.h to appropriate TARG_CPU_DEP_*
        variables.

Fri May  3 17:58:31 1996  Ian Lance Taylor  <[email protected]>

        * config/obj-coff.c (coff_frob_symbol): Don't merge a symbol with
        SF_GET_STATICS set.
        (yank_symbols): Likewise.

Wed May  1 13:38:17 1996  Ian Lance Taylor  <[email protected]>

        * subsegs.h (segment_info_type): If MANY_SEGMENTS and not
        BFD_ASSEMBLER, add name field.
        * config/obj-coff.c: Include "libiberty.h".
        (coff_header_append): Handle long section names.
        (crawl_symbols): Just use the name field for the symbol name,
        without worrying about null byte termination.
        (w_strings): Handle long section names.
        (write_object_file): Likewise.  Also, use the name field, rather
        than scnhdr.s_name.
        (obj_coff_add_segment): Permit long section names.
        (obj_coff_init_stab_section): Use the name field, rather than
        scnhdr.s_name.
        (adjust_stab_section): Likewise.
        * config/te-pe.h (COFF_LONG_SECTION_NAMES): Define.

        * config/tc-i960.c (brtab_emit): Don't set fx_im_disp field.
        (mem_fmt): Likewise.
        (md_apply_fix): Don't check fx_im_disp field.

Thu Apr 25 11:39:51 1996  Ian Lance Taylor  <[email protected]>

        * configure.in: Add * after sparc*-*-vxworks.
        * configure: Rebuild.

        * app.c (do_scrub_begin): If tc_comment_chars is not defined,
        define it to comment_chars.  Use tc_comment_chars rather than
        comment_chars.
        (do_scrub_chars): Use tc_comment_chars rather than comment_chars.
        * config/tc-m68k.h (tc_comment_chars): Define.
        (m68k_comment_chars): Declare.
        * config/tc-m68k.c (m68k_comment_chars): Rename from
        comment_chars.  Change into a pointer rather than an array.
        (md_longopts): Add "bitwise-or".
        (md_parse_option): Handle OPTION_BITWISE_OR.
        (md_show_usage): Mention --bitwise-or.
        * doc/c-m68k.texi: Document --bitwise-or.

Wed Apr 24 11:28:38 1996  Ian Lance Taylor  <[email protected]>

        * config/tc-m68k.c (m68k_ip): Prevent attempts to use long offsets
        in 68000 mode.

        * config/obj-coff.c (obj_coff_section): BFD_ASSEMBLER version:
        call demand_empty_rest_of_line.  Non BFD_ASSEMBLER version:
        correct handling of input line pointer, and call
        demand_empty_rest_of_line.

Mon Apr 22 18:02:37 1996  Doug Evans  <[email protected]>

        * config/tc-sparc.c (in_bitfield_range): New static function.
        (sparc_ip): New cases X,Y.  Use SPARC_OPCODE_ARCH_V9_P.
        (md_apply_fix, cases BFD_RELOC_32_PCREL_S2,
        BFD_RELOC_SPARC_{WDISP16,WDISP19}): Fix undefined code.
        (md_apply_fix): New cases BFD_RELOC_SPARC_[56].
        (tc_gen_reloc): New cases BFD_RELOC_SPARC_[56].

Thu Apr 18 18:58:33 1996  Ian Lance Taylor  <[email protected]>

        * config/obj-coff.c: BFD_ASSEMBLER:
        (coff_last_bf): New static variable.
        (coff_frob_symbol): Set endndx of a .bf symbol.
        Non BFD_ASSEMBLER:
        (obj_coff_endef): Call SF_SET_PROCESS on a .bf symbol.
        (last_bfP): New static variable.
        (yank_symbols): Set endndx of a .bf symbol.

Thu Apr 18 11:53:58 1996  Michael Meissner  <[email protected]>

        * config/tc-ppc.c (md_parse_option): Add support for Solaris's -le
        and -s options.  Add -be for good measure.

Wed Apr 17 12:31:01 1996  Ian Lance Taylor  <[email protected]>

        * read.c (s_space): Support non-constant fill value.  Handle fill
        value correctly for a size other than 1.

Tue Apr 16 15:17:40 1996  Doug Evans  <[email protected]>

        * config/tc-arm.c (my_get_float_expression): Update call to
        gen_to_words, X_PRECISION changed from 6 to 5.

Tue Apr 16 10:25:42 1996  Michael Meissner  <[email protected]>

        * config/tc-ppc.c (register_name,reg_name_search): Move register
        name lookup from PE specific code to all targets.  Add support for
        -mregnames/-mno-regnames to control whether register names are
        expanded or not.
        (md_assemble): Call register_name for all platforms.
        (md_parse_option): Add support for -mregnames/-mno-regnames.

        * configure.in (powerpcle*-*-solaris): Add support.
        (powerpc*-*-linux): Ditto.
        * configure: Regenerate.

        * config/ppc-sol.mt: New config file for PowerPC Solaris.

Mon Apr 15 12:26:33 1996  Ian Lance Taylor  <[email protected]>

        * config/tc-mips.c (mips_frob_file): Permit multiple %hi relocs to
        be associated with a single %lo reloc.

        * config/tc-mips.c (load_address): Cast X_add_number to valueT
        before comparing against MAX_GPREL_OFFSET, so that negative
        numbers are handled correctly.
        (macro): Likewise.

Thu Apr 11 12:39:02 1996  Ian Lance Taylor  <[email protected]>

        * config/tc-sparc.c (last_insn): New static variable.
        (md_assemble): Warn about putting floating point branches in a
        delay slot.  If architecture is less than v9, insert NOP
        instructions between floating point instructions and floating
        point branches.  (The SunOS assembler does both these operations.)
        Save the last instruction opcode.
        (sparc_ip): Add pinsn parameter.  Change caller.

        * config/tc-m68k.c (md_estimate_size_before_relax): Correct check
        for byte jump to next instruction to skip empty frags.

Wed Apr 10 16:48:12 1996  Ian Lance Taylor  <[email protected]>

        * config/tc-alpha.c (alpha_ip): If we are going to call emit_add64
        for addq with a 16 bit signed value, just emit a lda instruction
        instead.

Wed Apr 10 14:34:49 1996  Jeffrey A Law  ([email protected])

        * config/tc-h8300.c (do_a_fix_imm): Don't cut off high bits
        of a 32bit operand.

Mon Apr  8 14:42:53 1996  Ian Lance Taylor  <[email protected]>

        * configure.in: Permit --enable-shared to specify a list of
        directories.
        * configure: Rebuild.

Fri Apr  5 17:01:35 1996  Jeffrey A Law  ([email protected])

        * config/tc-h8300.c (get_specific): Remove some #if 0 code.
        (build_bytes): Remove all ABSMOV related code; it's unnecessary.

Fri Apr  5 15:13:10 1996  Andreas Schwab  <[email protected]>

        * config/atof-ieee.c: Fix handling of denormalized extended
        precision numbers and overflow/underflow detection.
        (MAX_PRECISION, X_PRECISION, P_PRECISION): Changed from 6 to 5, to
        not include the 16 bit gap in the m68k extended precision format.

Fri Apr  5 14:29:23 1996  Ian Lance Taylor  <[email protected]>

        * configure.in: Add i386-*-freebsdelf* target; from John Polstra
        <[email protected]>.
        * configure: Rebuild.

Fri Apr  5 18:39:28 1996  James G. Smith  <[email protected]>

        * config/tc-mips.c: Allow non-zero offsets from .sdata symbols to
        be accessed using the $gp register.
        * config/tc-mips.h (MAX_GPREL_OFFSET): Added.

Wed Apr  3 10:56:14 1996  Doug Evans  <[email protected]>

        * config/tc-sparc.c (sparc_md_end): Set bfd machine number to
        bfd_mach_sparc_sparclet if current_architecture is sparclet.

Mon Apr  1 16:55:44 1996  Ian Lance Taylor  <[email protected]>

        * read.c (get_line_sb): Bump line counters based on
        input_line_pointer[-1], not *input_line_pointer.  Don't bother to
        call LISTING_NEWLINE.
        (s_macro): Don't call demand_empty_rest_of_line.
        * app.c (do_scrub_chars): When handling C style comments, unget
        ch2 rather than ch.

Fri Mar 29 16:15:06 1996  Ian Lance Taylor  <[email protected]>

        * read.h (enum linkonce_type): Define.
        (s_linkonce): Declare.
        * read.c (potable): Add "linkonce".
        (s_linkonce): New function.
        * subsegs.h (segment_info_type): Add linkonce field to
        MANY_SEGMENTS && ! BFD_ASSEMBLER section.
        * config/obj-coff.h (obj_handle_link_once): Define if TE_PE.
        (obj_coff_pe_handle_link_once): Declare if TE_PE.
        * config/obj-coff.c: If TE_PE and not BFD_ASSEMBLER, #include
        "coff/pe.h".
        (obj_coff_pe_handle_link_once): New function, defined if TE_PE.
        (c_section_symbol): If TE_PE, set the x_comdat field in the aux
        entry based on the linkonce field in segment_info.
        * doc/as.texinfo: Document .linkonce.

Fri Mar 29 11:31:27 1996  J.T. Conklin  ([email protected])

        * doc/as.1: Changed to be recognized by catman -w on Solaris.

Thu Mar 28 15:27:47 1996  Ian Lance Taylor  <[email protected]>

        * stabs.c (s_stab_generic): Call the listing functions before
        doing the rest of the processing, which may involve freeing the
        string.  Pass string, not string + stroff, to OBJ_PROCESS_STAB in
        SEPARATE_STAB_SECTIONS case.

        * config/tc-hppa.c: Remove nested comment.
        (tc_gen_reloc): Move label done inside the ifdef in which it is
        used.
        (md_apply_fix): Pass pointers to correct types to libhppa.h
        functions.  Always return a value.

        * config/tc-mips.h (tc_frob_file): Define.
        (mips_frob_file): Declare.
        * config/tc-mips.c (struct mips_hi_fixup): Define.
        (mips_hi_fixup_list): New static variable.
        (imm_unmatched_hi): New static variable.
        (md_assemble): Clear imm_reloc, imm_unmatched_hi, and
        offset_reloc.  Pass imm_unmatched_hi to append_insn.
        (append_insn): Add unmatched_hi parameter.  If it is set, add the
        new fixup to mips_hi_fixup_list.  Change all callers.
        (mips_ip): Set imm_unmatched_hi when appropriate.
        (mips_frob_file): New function.

Thu Mar 28 11:47:59 1996  Doug Evans  <[email protected]>

        * configure.in (sparc-*-solaris2*): Renamed from sparc*-*-solaris2*.
        * configure: Regenerated.

Tue Mar 26 18:19:12 1996  Ian Lance Taylor  <[email protected]>

        * as.c (main): Call bfd_set_error_program_name.

Fri Mar 22 11:13:00 1996  Ian Lance Taylor  <[email protected]>

        * as.h (strdup): Don't declare.
        * stabs.c: Include libiberty.h
        (get_stab_string_offset): Use xstrdup rather than strdup.
        (s_stab_generic): Likewise.
        * as.c (parse_args): Likewise.
        * read.c (s_mri_sect): Likewise.

        * gasp.c (change_base): Recognize \(...) construct documented to
        pass through enclosed characters literally through to the output.
        (process_assigns): Likewise.  Also, be more careful to avoid
        looking past the end of the buffer.

Thu Mar 21 13:18:43 1996  Ian Lance Taylor  <[email protected]>

        * config/tc-i386.c (md_parse_option): If OBJ_ELF, ignore -k for
        FreeBSD compatibility.  From John Polstra <[email protected]>.

Wed Mar 20 18:13:32 1996  Andreas Schwab  <[email protected]>

        * doc/as.texinfo, doc/c-i960.texi: Fix typos.

Wed Mar 20 17:05:16 1996  David Mosberger-Tang  <[email protected]>

        * config/alpha-opcode.h: Added cvtst instruction.

Mon Mar 18 13:12:46 1996  Ian Lance Taylor  <[email protected]>

        * ecoff.c (ecoff_stab): Don't try to make a symbol out of the stab
        string.  Extract the addend from the result of expression.

Fri Mar 15 17:10:43 1996  Ian Lance Taylor  <[email protected]>

        * app.c (do_scrub_chars): If whitespace is seen in state 11, and
        LABELS_WITHOUT_COLONS is not defined, and we are not in m68k MRI
        mode, change the state to 3 rather than 1.

Thu Mar 14 18:18:25 1996  Ian Lance Taylor  <[email protected]>

        * config/obj-coff.h (C_REGISTER_SECTION): Change from 20 to 50, to
        correspond to 11 March change.

Thu Mar 14 15:27:10 1996  Jeffrey A Law  ([email protected])

        * config/tc-h8300.c (build_bytes, MEMIND case): Generate
        an R_MEM_INDIRECT reloc rather than R_RELBYTE.

Tue Mar 12 12:21:10 1996  Ian Lance Taylor  <[email protected]>

        * configure: Rebuild with autoconf 2.8.

Mon Mar 11 18:57:12 1996  Ian Lance Taylor  <[email protected]>

        * config/atof-ieee.c (gen_to_words): Improve handling of
        X_PRECISION numbers.  Based on patches from Andreas Schwab
        <[email protected]>.

Mon Mar 11 09:59:53 1996  Steve Chamberlain  <[email protected]>

        * as.h (SEG_NORMAL, SEG_LIST): Bump segment limit from 10 to 40.
        (SEG_LAST): New.
        * subsegs.c (MANY_SEGMENTS): Increase segment limit.
        * config/obj-coff.c (seg_N_TYPE, seg_info_off_by_4): Likewise.
        (do_relocs_for, w_symbols, obj_coff_add_segment, do_linenos_for,
        crawl_symbols, coff_header_append): Loop to SEG_LAST rather than
        SEG_E9.
        
Thu Mar  7 15:17:39 1996  Doug Evans  <[email protected]>

        * config/tc-sparc.c (sparc_ip): Handle operand char 'O' (neg reg).

Thu Mar  7 09:19:15 1996  Jeffrey A Law  ([email protected])

        * config/tc-hppa.c (SUBSEG_MILLI): Define.
        (pa_def_subspaces): Add $MILLICODE$.
        (pa_spaces_begin): Set section flags for $MILLICODE$.

Wed Mar  6 14:11:30 1996  Ian Lance Taylor  <[email protected]>

        * config/obj-elf.c (obj_elf_section): Only SEC_LOAD if the type is
        not SHT_NOBITS.  Don't tamper with flags based on type if a
        special section was found (revert Feb 29 change).

        * config/tc-sh.c (sh_do_align): Only align using the nop pattern
        if aligning to a longword boundary or greater.

Tue Mar  5 15:10:43 1996  Jim Wilson  <[email protected]>

        * config/tc-sh.c (sh_do_align): Pass 1 not 2 to frag_align.

Mon Mar  4 20:50:57 1996  Steve Chamberlain  <[email protected]>

        * configure.in (i386-*-cygwin32): Don't use bfd_gas.
        * configure: Regenerated.

Mon Mar  4 10:13:06 1996  Jeffrey A Law  ([email protected])

        * config/tc-hppa.c: Add default definitions for R_N0SEL and
        R_N1SEL since they're not defined for old versions of hpux.

        * config/tc-hppa.c (tc_gen_reloc): Fix typo in R_COMP2 code.
        Set "sym_ptr_ptr" and "addend" fields to dummy values for
        R_N0SEL and R_N1SEL.

Fri Mar  1 10:20:52 1996  Andreas Schwab  <[email protected]>

        * flonum-konst.c: Add two more constants for 1e+-2048 and
        1e+-4096, and correct the other constants.

        * symbols.c (resolve_symbol_value): Handle O_logical_not.

Thu Feb 29 13:58:35 1996  Michael Meissner  <[email protected]>

        * config/obj-elf.c (obj_elf_section): Allow predefined section
        types to set the nobits type.  Avoid a shadowed declaration.

Wed Feb 28 15:38:56 1996  Jeffrey A Law  ([email protected])

        * config/tc-hppa.c (hppa_fix_adjustable): For SOM, don't
        reduce relocs using e_nlrsel field selectors.

        * write.c (fix_new_exp): Don't use #elif.  Some compilers
        don't handle it.

        * config/tc-hppa.c (selector_table): Add "n", "nl", and "nlr" to
        the selector table.
        (pa_chk_field_selector): Handle new field selectors for SOM.

Tue Feb 27 14:42:27 1996  Andreas Schwab  <[email protected]>

        * configure.in (m68k-*-linux*aout*, m68k-*-linux*): New targets.
        * configure: Rebuild.
        * config/te-linux.h (LOCAL_LABELS_FB): Define.
        * config/tc-m68k.h (TARGET_FORMAT) [TE_LINUX]: Define to
        "a.out-m68k-linux".
        * config/tc-m68k.c (comment_chars): Don't include '#' if TE_LINUX
        is defined.

Mon Feb 26 18:58:58 1996  Stan Shebs  <[email protected]>

        * mpw-make.sed: Update to handle shared library support.

Mon Feb 26 10:34:10 1996  Doug Evans  <[email protected]>

        * config/tc-sparc.c (sparc_ip): Print all architectures that support
        the insn on mismatch.

Fri Feb 23 21:44:39 1996  Rob Savoye  <[email protected]>

        * configure.in: Add support for a29-coff.
        * configure: Rebuild.

Thu Feb 22 16:39:43 1996  Ian Lance Taylor  <[email protected]>

        * config/tc-sh.c (sh_coff_frob_file): Don't consider the address
        of the section when looking for the R_SH_USES fixup, because the
        frag addresses have not yet been adjusted.

        * gdbinit.in: Set a breakpoint on as_warn_where.

        * config/tc-mips.c (macro): Add missing arguments to macro_build
        omitted in last change.  From Jim Wilson <[email protected]>.

Wed Feb 21 17:00:32 1996  Ian Lance Taylor  <[email protected]>

        * config/tc-h8300.c (tc_reloc_mangle): Change reloc based on size
        if it is TC_CONS_RELOC.  Set a size of 4 to R_RELLONG.

Wed Feb 21 09:25:39 1996  Doug Evans  <[email protected]>

        * config/tc-sparc.c (sparc_ip): Recognize %asr0 for v8.

Tue Feb 20 21:48:03 1996  Doug Evans  <[email protected]>

        * config/tc-sparc.c (parse_keyword_arg): Accept leading '%'.
        (sparc_ip): Accept %asr[1..31] for v8 and %asr[%16..31] for v9.
        Recognize [uU] format args as sparclet cpregs.

Tue Feb 20 22:25:55 1996  Ian Lance Taylor  <[email protected]>

        * config/tc-sh.c (sh_handle_align): Don't emit R_SH_ALIGN relocs
        in bss_section.

Mon Feb 19 14:16:24 1996  Ian Lance Taylor  <[email protected]>

        * config/tc-sparc.h (TC_RELOC_RTSYM_LOC_FIXUP): Check S_IS_WEAK as
        well as S_IS_EXTERNAL.
        (tc_fix_adjustable): Likewise.
        * config/tc-sparc.c (md_apply_fix): In OBJ_ELF case, check for
        S_IS_WEAK as well as S_IS_EXTERNAL when deciding whether to return
        early.
        (tc_gen_reloc): Check S_IS_WEAK as wel as S_IS_EXTERNAL when
        deciding whether to convert BFD_RELOC_32_PCREL_S2 if PIC.

Mon Feb 19 02:15:57 1996  Doug Evans  <[email protected]>

        * config/tc-sparc.c (max_architecture): Change to sparclite for
        32 bit arch.
        (default_compatible): Delete.
        (sparc_ffs): New function.
        (md_begin): Only call SPARC_OPCODE_CONFLICT_P once.
        (sparc_ip): Rewrite architecture match and bump logic.

Sun Feb 18 15:03:50 1996  Ian Lance Taylor  <[email protected]>

        * configure.in: Check for 'do not mix' from native linker before
        trying to use -rpath.
        * configure: Rebuild.

Fri Feb 16 16:53:31 1996  Ian Lance Taylor  <[email protected]>

        * config/obj-coff.h (SF_ADJ_LNNOPTR): Define (non BFD_ASSEMBLER).
        (SF_GET_ADJ_LNNOPTR): Define (non BFD_ASSEMBLER).
        (SF_SET_ADJ_LNNOPTR): Define (non BFD_ASSEMBLER).
        * config/obj-coff.c (obj_coff_endef): Set ADJ_LNNOPTR when LNNOPTR
        is set.
        (w_symbols): If ADJ_LNNOPTR is set, add the section lnnoptr field
        to the symbol lnnoptr field, to get the correct file offset.

Thu Feb 15 14:48:38 1996  Michael Meissner  <[email protected]>

        * config/obj-elf.c (elf_frob_symbol): On the PowerPC, force all
        symbols that are not function, file, or section symbols to be
        object types.

Thu Feb 15 11:20:18 1996  Ian Lance Taylor  <[email protected]>

        * configure: Set and substitute RPATH_ENVVAR.
        * configure: Rebuild.
        * Makefile.in (RPATH_ENVVAR): New variable.
        (check): Use $(RPATH_ENVVAR) rather than LD_LIBRARY_PATH.

        * configure.in: Accept i686.  From H.J. Lu <[email protected]>: i386
        doesn't need opcodes.  If configuring shared, opcodes needs bfd.
        * configure: Rebuild.

Wed Feb 14 16:33:12 1996  Martin Anantharaman  <[email protected]>

        * read.c (s_mri_sect): Don't return '\0' in type.  Set all
        appropriate flags in BFD section.

        * configure.in (m68k-*-psos*): New target.
        * configure: Rebuild.
        * config/te-psos.h: New file.
        * config/tc-m68k.c (comment_chars): Don't include '#' if TE_PSOS
        is defined.

Wed Feb 14 13:43:24 1996  Ian Lance Taylor  <[email protected]>

        From Alan Modra <[email protected]>:
        * configure.in: Remove duplicate setting of cpu_type.  Check
        whether opcodes library is required for on all targets, not just
        primary one.
        * configure: Rebuild.

        * config/tc-mips.c (mips_big_got): New static variable.
        (s_extern): Don't declare.
        (reg_needs_delay): New static function.
        (macro_build): Permit GOT/CALL_HI/LO relocs.
        (macro_build_lui): If place is not NULL, use the number in the
        expression.
        (load_address): Handle mips_big_got case.
        (macro): Handle mips_big_got for M_LA_AB, M_JAL_A, and load and
        store macros.
        (OPTION_XGOT): Define.
        (md_longopts): Add "xgot" if OBJ_ELF.
        (md_parse_option): Handle -xgot.
        (md_show_usage): Mention -xgot.
        (md_apply_fix): Permit GOT/CALL_HI/LO relocs.
        (tc_gen_reloc): Handle GOT/CALL_HI/LO relocs.

Wed Feb 14 11:22:27 1996  Andreas Schwab  <[email protected]>

        * config/tc-m68k.c (m68k_ip) [operand kind '#']: When fixing
        the byte relocation, point it to the low byte of the word.

Tue Feb 13 15:31:18 1996  Ian Lance Taylor  <[email protected]>

        * configure.in: Set HDLFLAGS for *-*-hpux with --enable-shared.
        * configure: Rebuild.

Mon Feb 12 15:53:46 1996  Doug Evans  <[email protected]>

        * configure.in: Recognize any sparc* cpu.
        * configure: Regenerated.

Mon Feb 12 15:41:21 1996  Ian Lance Taylor  <[email protected]>

        * read.c (potable): Add "mri" and ".mri".
        (s_mri): New function.
        * read.h (s_mri): Declare.
        * app.c (scrub_m68k_mri): New static variable.
        (mri_pseudo): New static variable.
        (do_scrub_begin): Add m68k_mri parameter.  Use it rather than
        flag_m68k_mri.  Initialize scrub_m68k_mri.
        (mri_state, mri_last_ch): New static variables.
        (struct app_save): Add scrub_m68k_mri, mri_state, and mri_last_ch
        fields.
        (app_push): Save new fields.
        (app_pop): Restore new fields.
        (do_scrub_chars): Check scrub_m68k_mri rather than flag_mri_mri.
        If TC_M68K, use a trivial state machine to look for occurrences of
        the .mri pseudo-op, and change the mode appropriately.
        * as.h (do_scrub_begin): Update prototype.
        * input-scrub.c (input_scrub_begin): Pass flag_m68k_mri to
        do_scrub_begin.
        * config/tc-m68k.c (reg_prefix_optional_seen): New static
        variable.
        (m68k_mri_mode_change): New function.
        (md_parse_option): Set reg_prefix_optional_seen.
        * config/tc-m68k.h (m68k_mri_mode_change): Declare.
        (MRI_MODE_CHANGE): Define.
        * doc/as.texinfo: Document .mri pseudo-op.

        * app.c (do_scrub_chars): In MRI mode, don't treat '#' as a
        comment character.

Mon Feb 12 15:16:29 1996  Andreas Schwab  <[email protected]>

        Support for OBJ_ELF on m68k, mostly inside #ifdef OBJ_ELF:
        * config/m68k-parse.h (enum pic_relocation): Define.
        (struct m68k_exp): Add pic_reloc field.
        * config/tc-m68k.h (TC_RELOC_RTSYM_LOC_FIXUP): Define.
        (tc_fix_adjustable): Define to call tc_m68k_fix_adjustable.
        (NO_RELOC): Define to BFD_RELOC_NONE if BFD_ASSEMBLER, to zero
        otherwise.
        * config/tc-m68k.c: Delete definition of NO_RELOC.
        (struct m68k_it): Add pic_reloc field.
        (add_fix): Copy over pic_reloc field.
        (md_pseudo_table): Interpret .align parameter as byte count.
        (mote_pseudo_table): Likewise.
        (tc_m68k_fix_adjustable): New function.
        (get_reloc_code): New function.
        (md_assemble): Use it as last argument to fix_new_exp.
        (md_apply_fix_2): For a relocation against a symbol don't put the
        addend into the data.
        (tc_gen_reloc): Different addend computation for OBJ_ELF.
        (m68k_ip): Don't relax an operand that requires pic relocation.
        (md_begin): Align .text, .data and .bss on 4 byte boundary by
        default.
        * write.c (fixup_segment): Don't add symbol value to addend if
        TC_M68K and OBJ_ELF.
        * config/m68k-parse.y (yylex): Handle @PLTPC, etc.
        (motorola_operand): Add rule for `(zapc, EXPR)'.

Mon Feb 12 10:07:33 1996  David Mosberger-Tang  <[email protected]>

        * ecoff.c (ecoff_directive_weakext): Fixed so that whitespace
        *really* is permissible before the comma.

Mon Feb 12 00:12:13 1996  Ian Lance Taylor  <[email protected]>

        * config/tc-sh.c (sh_do_align): Align to a 2 byte boundary before
        inserting nop instructions.

Fri Feb  9 10:54:19 1996  Ian Lance Taylor  <[email protected]>

        * config/te-aux.h: Change include of aux.h to aux-coff.h.

Thu Feb  8 20:02:58 1996  Ian Lance Taylor  <[email protected]>

        * config/tc-i960.c (tc_coff_symbol_emit_hook): Correct storage
        class setting for a CALLNAME symbol in COFF.

        * read.c (potable): Pass negative numbers for new .balign[wl] and
        .p2align[wl] pseudo-ops.
        (s_align_bytes): Treat a negative argument as specifying the fill
        length.
        (s_align_ptwo): Likewise.

Wed Feb  7 14:12:03 1996  Ian Lance Taylor  <[email protected]>

        * read.c (potable): Add balignw, balignl, p2alignw, and p2alignl.
        (do_align): Take new len parameter.  Change all callers.  Pass it
        to md_do_align.
        (s_align_bytes): Arg now indicates the length of the fill pattern.
        (s_align_ptwo): Likewise.
        * config/obj-coff.c (write_object_file): Pass length to
        md_do_align.
        * config/tc-i386.h (md_do_align): Take new len parameter.
        * config/tc-m88k.h (md_do_align): Likewise.
        * config/tc-m88k.c (m88k_do_align): Likewise.
        * config/tc-sh.h (md_do_align): Likewise.
        * config/tc-sh.c (sh_do_align): Likewise.
        * doc/as.texinfo: Document new pseudo-ops.

        * config/obj-coff.c (fixup_mdeps): Divide offset by fr_var, as is
        done in cvt_frag_to_fill.

        * config/tc-sh.h (sh_do_align): Declare.
        (md_do_align): Define.
        * config/tc-sh.c (sh_do_align): New function.

        * ecoff.c (ecoff_build_lineno): Don't try to store the address
        difference if the next address is before the current one.

        * config/tc-m68k.c (struct m68k_cpu): Add alias field.
        (archs): Initialize new field.
        (m68k_ip): Don't list alias names when listing CPUs which support
        an instruction.

        * as.c (main): Call parse_args before read_begin.
        * app.c (do_scrub_chars): If flag_m68k_mri, don't put a dot in
        front of generated pseudo-ops.
        * read.c (potable): Ignore "name".
        (s_app_file): Permit a single quote after the string, since one
        may appear in m68k MRI mode.

        * configure.in: Check for --enable-shared.  If linking against
        shared BFD and opcodes, fix library name on SunOS, and try to set
        -rpath reasonably.
        * configure: Rebuild.

Tue Feb  6 15:16:17 1996  Ian Lance Taylor  <[email protected]>

        * as.h (flag_m68k_mri): Declare.
        * as.c (parse_args): If TC_M68K, set flag_m68k_mri for -M.
        * Many files: For MRI syntax that is specific to the m68k MRI
        assembler, check flag_m68k_mri rather than flag_mri or
        MRI_MODE_NEEDS_PSEUDO_DOT.

Mon Feb  5 16:29:11 1996  Ian Lance Taylor  <[email protected]>

        * config/tc-i960.c (ARCH_HX): Define.
        (arch_tab): Add HX.
        (targ_has_sfr): Handle ARCH_HX.
        (targ_has_iclass): Handle ARCH_HX.
        (tc_coff_fix2rtype): Add return 0 to avoid warning.
        (tc_headers_hook): If the architecture was specified explicitly,
        use it when setting the flags.  Set the extern variable coff_flags
        rather than headers->filehdr.f_flags, since the latter is set
        unconditionally in obj-coff.c.
        (i960_handle_align): Remove unused variable fixp.

        Support for building bfd and opcodes as shared libraries, based on
        patches from Alan Modra <[email protected]>:
        * configure.in: Set OPCODES and BFD to search directories.
        Substitute OPCODES_DEP and BFDDEP.  On SunOS, set HLDFLAGS.
        * configure: Rebuild.
        * Makefile.in (LDFLAGS, HLDFLAGS): New variables.
        (LIBDEPS): New variable.
        (as.new0: Depend upon $(LIBDEPS) rather than $(LIBS).  Use
        $(HLDFLAGS) in link.
        (check): Set LD_LIBRARY_PATH in the environment.

Fri Feb  2 17:41:53 1996  Michael Meissner  <[email protected]>

        * config/tc-ppc.h (ELF_TC_SPECIAL_SECTIONS): Make .sdata2, .sbss2,
        .PPC.EMB.sdata0, and .PPC.EMB.sbss0 sections all default to
        read-only, not read/write.

Fri Feb  2 14:09:25 1996  Alan Modra  <[email protected]>

        * Makefile.in (INSTALL_XFORM): Remove -e.

Fri Feb  2 12:32:15 1996  Ian Lance Taylor  <[email protected]>

        * write.c (write_relocs): Use S_IS_DEFINED and S_IS_COMMON rather
        than comparing S_GET_SEGMENT to undefined_section.
        (write_object_file): Skip symbols which were equated to an
        undefined or common symbol.
        * symbols.c (resolve_symbol_value): Use S_IS_DEFINED and
        S_IS_COMMON rather than comparing S_GET_SEGMENT to
        undefined_section.
        (S_GET_VALUE): Likewise.  Avoid recursion problems if S_IS_DEFINED
        or S_IS_COMMON call S_GET_VALUE.
        * config/obj-aout.h (S_IS_COMMON): Define if not BFD_ASSEMBLER.
        * config/obj-aout.c (obj_emit_relocations): If a reloc is equated
        to an undefined or common symbol, convert the reloc to be against
        the target symbol.
        (obj_crawl_symbol_chain): Skip symbols which were equated to an
        undefined or common symbol.
        * config/obj-bout.h (S_IS_COMMON): Define if not BFD_ASSEMBLER.
        * config/obj-bout.c (obj_emit_relocations): If a reloc is equated
        to an undefined or common symbol, convert the reloc to be against
        the target symbol.
        (obj_crawl_symbol_chain): Skip symbols which were equated to an
        undefined or common symbol.
        * config/obj-coff.c (do_relocs_for): Use S_IS_DEFINED and
        S_IS_COMMON rather than comparing S_GET_SEGMENT to
        undefined_section.
        (yank_symbols): Skip symbols which were equated to an undefined or
        common symbol.

Thu Feb  1 15:34:32 1996  Ian Lance Taylor  <[email protected]>

        * config/obj-aout.h (S_IS_LOCAL): Check for \002 as well as \001.
        * config/obj-bout.h (S_IS_LOCAL): Likewise.

        * configure.in: Make sure we only add m68k-parse.o to
        ${extra_objects} once, no matter how many m68k targets have been
        enabled.
        * configure: Rebuild.

Wed Jan 31 18:31:46 1996  Steve Chamberlain  <[email protected]>

        * configure.in (i386-*-cygwin32, ppc-*-cygwin32): New.
        * configure: Rebuild.

Wed Jan 31 14:03:17 1996  Richard Henderson  <[email protected]>

        * config/tc-m68k.c (md_pseudo_table): Add "extend" and "ldouble".
        * doc/c-m68k.texi: Document .extend and .ldouble.

        * configure.in (m68*-apple-aux*): New target.
        * config/te-aux.h: New file.
        * config/obj-coff.c (compare_external_relocs): New static function
        if TE_AUX.
        (do_relocs_for): Sort relocs if TE_AUX.
        (fixup_segment): If TE_AUX, store common symbol value in segment.
        * config/tc-m68k.h (TARGET_FORMAT): Define if TE_AUX.

Wed Jan 31 12:24:58 1996  Ian Lance Taylor  <[email protected]>

        * config/obj-coff.h (S_IS_LOCAL): Check for \002 as well as \001.

        * config/tc-mips.c (s_mips_globl): Set BSF_OBJECT if it is not
        BSF_FUNCTION.
        (s_cpload): Set BSF_OBJECT for _gp_disp symbol.
        * read.c (s_lcomm): If S_SET_SIZE is defined, set the size of the
        symbol.
        * ecoff.c (add_procedure): Set the BSF_FUNCTION flag.
        (ecoff_build_symbols): If S_SET_SIZE is defined, set the size of
        an undefined symbol and the size of a function symbol.
        * config/obj-elf.c (elf_frob_symbol): If TC_MIPS, set BSF_OBJECT
        for all common symbols.

Tue Jan 30 12:35:24 1996  Ken Raeburn  <[email protected]>

        * config/tc-i960.c (parse_memop): In MRI mode, don't use implicit
        scaling of index.

        * expr.c (operand): Accept 0x hex constants in MRI mode if not on
        m68k.

Mon Jan 29 12:21:30 1996  Ian Lance Taylor  <[email protected]>

        * config/obj-elf.c (obj_elf_type): Set BSF_OBJECT flag for a type
        of object.  From Ronald F. Guilmette <[email protected]>.

        * ecoff.c (localsym_t): Add addend field.
        (add_ecoff_symbol): Add addend argument.  Change all callers.
        (coff_sym_value): Make static.
        (coff_sym_addend): New static variable.
        (ecoff_directive_def): Initialize coff_sym_addend.
        (ecoff_directive_val): Accept symbol + constant.
        (ecoff_directive_endef): Pass coff_sym_addend to add_ecoff_symbol.
        (ecoff_build_symbols): Include the addend in the symbol value.

Fri Jan 26 19:28:52 1996  Kim Knuttila  <[email protected]>

        * config/tc-ppc.c (md_assemble): Ignore overflow on 
        BFD_RELOC_16_GOTOFF and BFD_RELOC_PPC_TOC16.

Fri Jan 26 16:14:17 1996  Michael Meissner  <[email protected]>

        * config/tc-ppc.c (md_apply_fix3): SDA21 relocations are now 4
        bytes in size, so offset appropriately in big endian mode when
        writing the bottom 2 bytes.

Thu Jan 25 20:26:23 1996  Doug Evans  <[email protected]>

        * config/tc-sparc.c (default_compatible): New static local.
        (md_begin): Initialize it.  Rewrite warn_on_bump handling.
        (sparc_ip): If no architecture or -bump specified, don't mark as
        mismatched those in default_compatible.

Thu Jan 25 12:21:53 1996  Ian Lance Taylor  <[email protected]>

        SCO ELF support from Robert Lipe <[email protected]>:
        * configure.in (i386-*-sco*elf*): Use fmt elf, targ sco5.
        * configure: Rebuild.
        * config/sco5.mt: New file; set TDEFINES to -DSCO_ELF.
        * config/tc-i386.c (sco_id): New function, if SCO_ELF.
        * config/tc-i386.h (tc_init_after_args): Define if SCO_ELF.
        (sco_id): Declare if SCO_ELF.

Thu Jan 25 03:10:53 1996  Doug Evans  <[email protected]>

        * config/tc-sparc.c (initial_architecture,can_bump_v9_p): Deleted.
        ({max,warn_after}_architecture): New static locals.
        (md_begin): Replace NUMOPCODES with sparc_num_opcodes.
        If both architecture and -bump requested, set max_architecture to max.
        (sparc_md_end): Simplify.
        (sparc_ip): Replace references to can_bump_v9_p with max_architecture.
        Rewrite code to bump architecture and check for conflicts.
        (md_longopts): Recognize -xarch={v8plus,v8plusa} for compatibility
        with Solaris assembler.
        (md_parse_option): Likewise.  Call sparc_opcode_lookup_arch.
        (md_show_usage): Update.

Wed Jan 24 22:11:03 1996  Doug Evans  <[email protected]>

        * Makefile.in (RUNTEST): Fix reference to $${srcdir}.

Mon Jan 22 09:21:36 1996  Doug Evans  <[email protected]>

        * config/tc-sparc.h (TARGET_FORMAT): Use #ifdef SPARC_ARCH64 instead of
        #ifdef sparcv9 when choosing value.
        (ENV64): Delete.
        (md_end): Define.
        (sparc_md_end): Declare.
        * config/tc-sparc.c (SPARC_V9): Renamed from sparcv9.
        (initial_architecture): New static local.
        (can_bump_v9_p): Likewise.
        (NO_V9): Delete all occurrences.
        (sparc_md_end): New function.
        (sparc_ip): New local v9_arg_p.  Rework fp reg number test.
        Don't bump architecture to v9 unless can_bump_v9_p set.
        (md_parse_option): -A<arch> passed, set can_bump_v9_p accordingly.
        * configure.in (sparc64 target cpu): Don't set obj_format here.
        (SPARC_V9): Renamed from sparcv9.
        (sparc64-*-elf*): Define SPARC_ARCH64.
        * configure: Regenerated.
        * acconfig.h (SPARC_V9): Renamed from sparcv9.
        (SPARC_ARCH64): Add.
        * conf.in: Regenerated.
        * config/vmsconf.h: Update.

Mon Jan 22 17:24:47 1996  James G. Smith  <[email protected]>

        * config/tc-mips.c (load_register): Optimise "dli" loads.
        (md_show_usage): add "-mcpu=vr4100" to help text.

Mon Jan 22 11:53:00 1996  Ian Lance Taylor  <[email protected]>

        * symbols.c (resolve_symbol_value): If a symbol is equated to an
        undefined symbol, preserve the X_op of O_symbol.
        (S_GET_VALUE): Fix check to permit this case.
        * write.c (write_relocs): If a reloc is against an undefined
        symbol equated to another symbol, change the reloc to be against
        the latter symbol.
        * config/obj-coff.c (do_relocs_for): Likewise.

        * config/tc-ppc.c (ppc_csect): An unnamed csect is storage class
        XMC_PR.

Mon Jan 22 10:59:48 1996  Michael Meissner  <[email protected]>

        * config/obj-elf.c (elf/ppc.h): Include elf/ppc.h if target
        computer is PowerPC.

        * config/tc-ppc.c (md_apply_fix3): Add more embedded relocations.

        * config/tc-ppc.h (ELF_TC_SPECIAL_SECTIONS): Add sections
        mentioned in the eabi.

Thu Jan 18 17:58:19 1996  Kim Knuttila  <[email protected]>

        * config/tc-ppc.c (ppc_reldata): Changed alignement on reldata_section
        * config/tc-ppc.c (ppc_pdata): Changed the alignment on pdata_section

Mon Jan 15 17:43:42 1996  Michael Meissner  <[email protected]>

        * config/tc-ppc.c (mapping): Add more relocation suffixes.

Sun Jan 14 21:29:36 1996  Michael Meissner  <[email protected]>

        * config/tc-ppc.c (ppc_elf_validate_fix): Allow .gcc_except_table
        as a section it is ok to have unadorned -mrelocatable pointers in.

Sat Jan 13 11:09:08 1996  Michael Meissner  <[email protected]>

        * config/tc-ppc.c (ppc_section*): Wrap these functions inside
        #ifdef OBJ_ELF.

Fri Jan 12 15:32:07 1996  Michael Meissner  <[email protected]>

        * config/obj-elf.c (obj_elf_section): Add hooks so machine
        dependent section attributes can be handled.

        * config/tc-ppc.h: (md_elf_section_{letter,type,word,flags}): New
        macros to add support for exclude section flag and ordered section
        type.

        * config/tc-ppc.c (ppc_elf_section_{letter,type,word,flags}): New
        functions to add support for exclude section flag and ordered
        section type.

Fri Jan 12 12:04:00 1996  Ian Lance Taylor  <[email protected]>

        * subsegs.c (section_symbol): Don't try to look up the section
        symbol in the hash table.  It should be possible to have a symbol
        with the same name as a section, but no connection to it.

        * read.c (cons_worker): Only call mri_comment_end from flag_mri.
        From James Carlson <[email protected]>.

        * expr.c (operand): Skip whitespace after a close parenthesis.
        From James Carlson <[email protected]>.

Tue Jan  2 12:43:23 1996  Jim Wilson  <[email protected]>

        * config/tc-sh.c (md_apply_fix): Call as_bad_where instead of
        as_warn_where for relocation overflow.
        (parse_reg): Accept register name only if next character is
        not alphanumeric.

For older changes see ChangeLog-9295