* ltconfig: Update after libtool/ltconfig.in change for

[binutils.git] / ChangeLog

Mon Mar 23 11:30:21 1998  Jeffrey A Law  ([email protected])

        * ltconfig: Update after libtool/ltconfig.in change for
        hpux11.

Fri Mar 20 18:51:43 1998  Ian Lance Taylor  <[email protected]>

        * ltconfig, ltmain.sh: Update to libtool 1.2.

Wed Mar 18 09:24:59 1998  Nick Clifton  <[email protected]>

        * configure.in: Add Thumb-pe target.

Tue Mar 17 16:59:00 1998  Syd Polk <[email protected]>
        * Makefile.in - changed sn targets to snavigator
        * configure.in - changed sn targets to snavigator

Fri Mar  6 01:02:03 1998  Richard Henderson  <[email protected]>

        * config.sub: Accept alphapca56 and alphaev6 properly.

start-sanitize-vr4320
Tue Mar  3 11:01:52 1998  Gavin Koch  <[email protected]>

        * config.sub (mips64vr4320-unknown-elf) : Added.

end-sanitize-vr4320

Mon Feb 23 14:46:06 1998  Ian Lance Taylor  <[email protected]>

        * Makefile.in (INSTALL_MODULES): Move install-tcl before
        install-itcl.
        (install-itcl): Remove dependency on install-tcl.

Mon Feb 23 09:53:28 1998  Mark Alexander  <[email protected]>

        * configure.in: Remove libgloss from noconfigdirs for MN10300.

Fri Feb 20 16:47:24 1998  Tom Tromey  <[email protected]>

        * configure: Don't let builds be done in source tree.

Thu Feb 19 13:40:41 1998  Ian Lance Taylor  <[email protected]>

        * configure.in: Don't build libgui for a cygwin32 target when not on
        a cygwin32 host.

Wed Feb 18 12:29:00 1998  Jason Molenda  ([email protected])

        * configure (redirect): Set to null, so default behavior of
        configure is now --verbose.

Thu Feb 12 15:03:08 1998  H.J. Lu  <[email protected]>

        * ltmain.sh (mkdir): Check that the directory doesn't exist
        before we exit with error, so that we don't get races during
        parallel builds.

Sat Feb  7 15:19:18 1998  Ian Lance Taylor  <[email protected]>

        * ltconfig, ltmain.sh: Update from libtool 1.0i.

Thu Feb  5 17:01:12 1998  Jason Molenda  ([email protected])

        * configure.in (host_tools, native_only): Add libtool.

Wed Feb  4 16:53:58 1998  Geoffrey Noer  <[email protected]>

        * configure.in: add target-gperf to noconfigdirs for Cygwin32.
        Fix typo in ming config comment.

Wed Feb  4 18:56:13 1998  Ian Lance Taylor  <[email protected]>

        * ltconfig, ltmain.sh: Update from libtool 1.0h.

Mon Feb  2 19:38:19 1998  Ian Lance Taylor  <[email protected]>

        * config.sub: Add tic30 cases, and map c30 to tic30.

Fri Jan 30 17:18:32 1998  Geoffrey Noer  <[email protected]>

        * configure.in: Remove expect from noconfigdirs when target
        is cygwin32.  OK to build expect and dejagnu with Canadian
        Cross.

start-sanitize-sky
Wed Jan 28 11:59:32 1998  Doug Evans  <[email protected]>

        * configure.in: Add dvp-elf support.
        * config.sub: Recognize dvp cpu.

end-sanitize-sky
Wed Jan 28 12:58:49 1998  Ian Lance Taylor  <[email protected]>

        * configure.in: Do build expect, dejagnu, and cvssrc for a cygwin32
        host.

        * config.guess: Use ${UNAME_MACHINE} rather than i386 for cygwin32
        and mingw32.

Wed Jan 28 10:26:37 1998  Manfred Hollstein  <[email protected]>

        * Makefile.in (BASE_FLAGS_TO_PASS): Remove passing $(local_prefix)
        here as it is not defined in the toplevel Makefile.

Tue Jan 27 23:25:06 1998  Manfred Hollstein  <[email protected]>

        * configure (package_makefile_rules_frag): New variable, which names
        a file with generic rules, ...
        Change comment to mention we now have FIVE parts.
        * configure: Undo last change.

Tue Jan 27 23:15:55 1998  Lassi A. Tuura  <[email protected]>

        * config.guess: More accurate determination of HP processor types.
        * config.sub: More accurate determination of HP processor types.

Sat Jan 24 01:59:45 1998  Manfred Hollstein  <[email protected]>

        * configure (package_makefile_frag): Move inserting the
        ${package_makefile_frag} to where it should be according
        to the comment.

Fri Jan 23 00:30:21 1998  Philip Blundell  <[email protected]>

        * config.guess: Add support for Linux/ARM.

Thu Jan 22 15:14:01 1998  Fred Fish  <[email protected]>

        * .cvsignore: Remove *-info and *-install since they match
        release-info and mpw-install, which we don't want to just ignore.

Sat Jan 17 21:28:08 1998  Pieter Nagel <[email protected]>

        * Makefile.in (FLAGS_TO_PASS): Pass down gcc_include_dir and
        local_prefix to sub-make invocations.

Sat Jan 17 21:04:59 1998 H.J. Lu  ([email protected])

        * configure.in: Check makefile fragments in the source
        directory.

Fri Jan 16 00:41:37 1998  Alexandre Oliva <[email protected]>

        * configure.in: check whether host and target makefile
        fragments exist before adding them to *_makefile_frag

Wed Jan 14 23:39:10 1998  Bob Manson  <[email protected]>

        * configure.in (target_configdirs): Add cygmon for sparc64-elf.
        
Wed Jan 14 12:48:07 1998  Keith Seitz  <[email protected]>

        * configure.in: Make sure we only replace RPATH_ENVVAR on
        lines which begin with RPATH_ENVVAR, i.e. add "^" to the
        regexp to sed.

        * Makefile.in (BASE_FLAGS_TO_PASS): Pass RRPATH_ENVVAR down
        to sub-makes.

1998-01-13  Lee Iverson   ([email protected])

        * config-ml.in (multi-do): LDFLAGS must include multilib
        designator.

Tue Jan 13 01:13:24 1998   Robert Lipe ([email protected])

        * config.guess: Recognize i[3456]-i586-UnixWare7-sysv5.

Sun Jan  4 01:06:55 1998  Mumit Khan  <[email protected]>

        * config.sub: Add mingw32 support.
        * configure.in: Likewise.
        * mh-mingw32: New file.

Sat Jan  3 12:11:05 1998 Franz Sirl <[email protected]>

        * configure.in: Finalize support for {alpha|powerpc}*-*-linux-gnulibc1

Sun Dec 28 11:28:58 1997  Jeffrey A Law  ([email protected])

        * Makefile.in (INSTALL_TARGET): Do install-gcc first.
        * configure (gxx_include_dir): Provide a definition for subdirs
        which do not use autoconf.

Wed Dec 24 22:46:55 1997  Jeffrey A Law  ([email protected])

        * config.guess: Sync with egcs.  Picks up new alpha support,
        BeOS & some additional linux support.

Tue Dec 23 12:45:50 1997  Jeffrey A Law  ([email protected])

        * config.guess: HP 9000/803 is a PA1.1 machine.

start-sanitize-vr5400
Mon Dec 22 11:27:12 1997  Jeffrey A Law  ([email protected])

        * config.sub (mips64vr5xxx-elf): Handle.  Treat as mips64vr5000-elf.

end-sanitize-vr5400

Sun Dec 21 16:53:12 1997  H.J. Lu  ([email protected])

        * configure.in (host_makefile_frag, target_makefile_frag):
        Handle multiple config files.
        (alpha-*-linux*): Treat alpha-*-linux* as alpha-*-linux* and
        alpha-*-*.

Thu Dec 18 13:13:03 1997  Doug Evans  <[email protected]>

        * mkdep: New file.

start-sanitize-ide
Wed Dec 17 11:27:59 1997  Ian Lance Taylor  <[email protected]>

        * configure: Only put libide in GDB_TK if --enable-ide.

end-sanitize-ide
start-sanitize-d30v
Wed Dec 17 09:53:02 1997  Michael Meissner  <[email protected]>

        * configure.in (d30v-*-*): Allow configuring of libide, vmake, etc.

end-sanitize-d30v
Tue Dec 16 17:36:05 1997  Ian Lance Taylor  <[email protected]>

        * Makefile.in: Add libgui directory.
        (GDB_TK): Add all-libgui.
        * configure.in: Add libgui directory.
        * configure: Add all-libgui to GDB_TK.

Mon Dec 15 16:12:28 1997  Nick Clifton  <[email protected]>

        * config-ml.in (multidirs): Add m32r to multilib list.

Fri Dec 12 10:43:31 1997  Brendan Kehoe  <[email protected]>

        * Makefile.in (all-target-gperf): Change dependency to
        all-target-libstdc++.

Wed Dec 10 15:10:38 1997  Ian Lance Taylor  <[email protected]>

        Source directory cvs renamed to cvssrc:
        * configure.in (host_tools): Change cvs to cvssrc.
        (native_only): Likewise.
        (noconfigdirs) [various cases]: Likewise.
        * Makefile.in (ALL_MODULES): Change all-cvs to all-cvssrc.
        (CROSS_CHECK_MODULES): Change check-cvs to check-cvssrc.
        (INSTALL_MODULES): Change install-cvs to install-cvssrc.
        (CLEAN_MODULES): Change clean-cvs to clean-cvssrc.
        (all-cvssrc): Rename target from all-cvs.

Tue Dec  2 10:08:31 1997  Nick Clifton  <[email protected]>

        * configure.in (noconfigdirs): Add support for Thumb target.

        * config.sub (maybe_os): Add support for Thumb target.

start-sanitize-ide
Tue Dec  2 06:51:40 1997  Keith Seitz  <[email protected]>

        * configure (GDB_TK): add all-libide to dependency list

Tue Dec  2 09:04:13 1997  Michael Meissner  <[email protected]>

        * configure.in (host_libs): Build libide all of the time.
        (noconfigdirs): Remove libide from all places that set noconfigdirs.

Mon Dec  1 10:53:40 1997  Keith Seitz  <[email protected]>

        * Makefile.in (all-vmake): remove double dependency on all-libide

end-sanitize-ide
Sun Nov 30 16:12:27 1997  Bob Manson  <[email protected]>

        * Makefile.in: Add rules for cygmon.

        * configure.in: Build cygmon for sparc-elf and sparclite-aout.

Wed Nov 26 11:53:33 1997  Keith Seitz  <[email protected]>

        * Makefile.in, configure, configure.in, ChangeLog: merge with foundry's
        11/18/97 build 

Mon Nov 10 15:23:21 1997  H.J. Lu  <[email protected]>

        * ltmain.sh: If mkdir fails, check whether the directory was created
        anyhow by some other process.

start-sanitize-d30v
Mon Nov 10 14:38:03 1997  Michael Meissner  <[email protected]>

        * configure.in (d30v-*-*): Configure all directories.

Sun Nov  9 17:36:20 1997  Michael Meissner  <[email protected]>

        * configure.in (d30v-*-*): Configure newlib, libiberty directories
        for the D30V.

Sat Nov  8 14:42:59 1997  Michael Meissner  <[email protected]>

        * configure.in (d30v-*-*): Configure target-libgloss on the D30V.

end-sanitize-d30v
Fri Nov  7 10:34:09 1997  Rob Savoye  <[email protected]>

        * include/libiberty.h: Add extern "C" { so it can be used with C++
        progrms.
        * include/remote-sim.h:  Add extern "C" { so it can be used with C++
        programs.

start-sanitize-tx19
Wed Nov  5 11:14:44 1997  Gavin Koch  <[email protected]>

        * config.sub: Move tx19 configury to reduce spurious differences
        with gcc/config.sub.

end-sanitize-tx19
start-sanitize-tx49
Wed Nov  5 11:14:44 1997  Gavin Koch  <[email protected]>

        * config.sub: Move tx49 configury to reduce spurious differences
        with gcc/config.sub.

end-sanitize-tx49
start-sanitize-d30v
Thu Oct 30 11:09:29 1997  Michael Meissner  <[email protected]>

        * configure.in (d30v-*-*): Configure GCC now.

end-sanitize-d30v
start-sanitize-tx49
Wed Oct 29 16:52:43 1997  Gavin Koch  <[email protected]>

        * config.sub: Add tx49 configury.

end-sanitize-tx49
start-sanitize-ide
Tue Oct 28 16:44:15 1997  Ian Lance Taylor  <[email protected]>

        * Makefile.in (install-foundry): New target.

end-sanitize-ide
Mon Oct 27 13:17:24 1997  Stan Shebs  <[email protected]>

        * configure.in: Remove a "second pass" of tweaking noconfigdirs,
        is no longer needed.

Mon Oct 27 12:03:53 1997  Jason Merrill  <[email protected]>

        * Makefile.in: check-target-libio depends on all-target-libstdc++.

start-sanitize-vr5400
Wed Oct 22 14:05:29 1997  Andrew Cagney  <[email protected]>

        * config.sub (maybe_os): Add mips64vr5400.

end-sanitize-vr5400
Mon Oct 20 15:28:49 1997  Klaus K"ampf  <[email protected]>

        * makefile.vms: Fix to work with DEC C.

start-sanitize-ide
Sat Oct 11 13:52:40 1997  Tom Tromey  <[email protected]>

        * Makefile.in (all-jstools): Depend on all-tix.

end-sanitize-ide
Tue Oct  7 23:58:57 1997  Gavin Koch  <[email protected]>

        * config.sub: Add mips-tx39-elf to marketing names.

Tue Oct  7 14:24:41 1997  Ian Lance Taylor  <[email protected]>

        * ltmain.sh: Handle symlinks in generated script.

Wed Oct  1 13:11:27 1997  Ian Lance Taylor  <[email protected]>

        * configure: Handle autoconf style directory options: --bindir,
        --datadir, --includedir, --infodir, --libdir, --libexecdir,
        --mandir, --oldincludedir, --sbindir, --sharedstatedir,
        --sysconfdir.
        * Makefile.in (sbindir, libexecdir, sysconfdir): New variables.
        (sharedstatedir, localstatedir, oldincludedir): New variables.
        (BASE_FLAGS_TO_PASS): Pass down bindir, datadir, includedir,
        infodir, libdir, libexecdir, localstatedir, mandir, oldincludedir,
        sbindir, sharedstatedir, and sysconfdir.

start-sanitize-d30v     
Wed Sep 24 18:06:27 1997  Stu Grossman  <[email protected]>

        * configure.in (d30v):  Remove tcl, tk, expect, gdb, itcl, tix, db,
        sn, and gnuserv from noconfigdirs.

end-sanitize-d30v       
Wed Sep 24 15:18:32 1997  Ian Lance Taylor  <[email protected]>

        * ltmain.sh: Tweak shell pattern to avoid bug in NetBSD /bin/sh.

start-sanitize-gdbtk
Thu Sep 18 15:37:42 1997  Andrew Cagney  <[email protected]>

        * configure (tooldir): enable_gdbtk=YES for cygwin32, NO for
        windows.  Consistent with gdb/configure.

end-sanitize-gdbtk
1997-09-15 02:37  Ulrich Drepper  <[email protected]>

        * config/mt-linux: Define CXXFLAGS to make sure -fvtable-thunks is
        used.
        * configure.in: Name Linux target fragment.

        * configure: Rewrite so that project Makefile fragment is inserted
        first and appears last in the resulting Makefile.

Tue Sep 16 09:55:07 1997  Andrew Cagney  <[email protected]>

        * Makefile.in (install-itcl): Install tcl first.

Sun Sep 14 20:53:42 1997  Geoffrey Noer  <[email protected]>

        * config/mh-cygwin32: ok to build split texinfo files

Fri Sep 12 16:19:20 1997  Geoffrey Noer  <[email protected]>
        
        * configure.in: remove bison from noconfigdirs for Cygwin32 host

Mon Sep  8 20:46:20 1997  Ian Lance Taylor  <[email protected]>

        * config.guess: Merge with FSF.

Sun Sep  7 15:55:28 1997  Gavin Koch  <[email protected]>

        * config.sub: Add "marketing-names" patch.

start-sanitize-tx19
        * config.sub: Add tx19/r1900.

end-sanitize-tx19
Fri Sep  5 16:11:28 1997  Joel Sherrill  ([email protected])

        * configure.in (*-*-rtems*): Do not build libgloss for rtems.

start-sanitize-ide
Wed Sep  3 19:38:01 1997  Ian Lance Taylor  <[email protected]>

        * Makefile.in (GDB_TK): Add all-libide.

end-sanitize-ide
Wed Sep  3 12:15:24 1997  Chris Provenzano  <[email protected]>

        * ltconfig: Set CONFIG_SHELL in libtool.
        * ltmain.sh: Use CONFIG_SHELL instead of /bin/sh

Tue Aug 26 16:46:46 1997  Andrew Cagney  <[email protected]>

        * Makefile.in (all-sim): Depends on all-readline.

Wed Aug 20 19:57:37 1997  Jason Merrill  <[email protected]>

        * Makefile.in (BISON, YACC): Use $$s.
        (all-bison): Depend on all-texinfo.

Tue Aug 19 01:41:32 1997  Jason Merrill  <[email protected]>

        * Makefile.in (BISON): Add -L flag.
        (YACC): Likewise.

start-sanitize-v850e
Mon Aug 18 11:30:50 1997  Nick Clifton  <[email protected]>

        * configure.in (noconfigdirs): Add support for v850e target. 
        
        * config.sub (maybe_os): Add support for v850e target.

Mon Aug 18 11:30:50 1997  Nick Clifton  <[email protected]>

        * configure.in (noconfigdirs): Add support for v850ea target. 
        
        * config.sub (maybe_os): Add support for v850ea target.

end-sanitize-v850e
Mon Aug 18 09:24:06 1997  Gavin Koch  <[email protected]>

        * config.sub: Add mipstx39.  Delete r3900.

start-sanitize-ide
Mon Aug 18 19:12:51 1997  Jason Molenda  ([email protected])

        * Makefile.in (all-vmake): Depends on all-tix.

end-sanitize-ide
Mon Aug 18 17:20:10 1997  Jason Molenda  ([email protected])

        * Makefile.in (all-autoconf): Depends on all-texinfo.

Fri Aug 15 23:09:26 1997  Michael Meissner  <[email protected]>

        * config-ml.in ({powerpc,rs6000}*-*-*): Update to current AIX and
        eabi targets.

Thu Aug 14 14:42:17 1997  Ian Lance Taylor  <[email protected]>

        * configure: Get CFLAGS and CXXFLAGS from Makefile, if possible.

        * configure: When handling a Canadian Cross, handle YACC as well as
        BISON.  Just set BISON to bison.  When setting YACC, prefer bison.
        * Makefile.in (all-bison): Depend upon all-texinfo.

start-sanitize-ide
        * Makefile.in (all-vmake): Depend upon all-tix.

end-sanitize-ide
Tue Aug 12 20:09:48 1997  Jason Merrill  <[email protected]>

        * Makefile.in (BISON): bison, not byacc or bison -y.
        (YACC): bison -y or byacc or yacc.
        (various): Add *-bison as appropriate.
        (taz): No need to mess with BISON anymore.

Tue Aug 12 22:33:08 1997  Ian Lance Taylor  <[email protected]>

        * configure: If OSTYPE matches *win32*, try to find a good value for
        CONFIG_SHELL.

start-sanitize-ide
Mon Aug 11 13:49:46 1997  Ian Lance Taylor  <[email protected]>

        * Makefile.in, configure.in: Handle jstools like vmake.

end-sanitize-ide
Sun Aug 10 14:41:11 1997  Ian Lance Taylor  <[email protected]>

        * Makefile.in (taz): Get the version number from AM_INIT_AUTOMAKE in
        configure.in if it is present.

Sat Aug  9 00:58:01 1997  Ian Lance Taylor  <[email protected]>

        * Makefile.in (LD_FOR_TARGET): Change ld.new to ld-new.

Fri Aug  8 16:30:13 1997  Doug Evans  <[email protected]>

        * config.sub: Recognize `arc' cpu.
        * configure.in: Likewise.
        * config-ml.in: Likewise.

Thu Aug  7 11:02:34 1997  Ian Lance Taylor  <[email protected]>

        * Makefile.in ($(INSTALL_X11_MODULES)): Depend upon installdirs.

Wed Aug  6 16:27:29 1997  Chris Provenzano  <[email protected]>

        * configure: Changed sed delimiter from ':' to '|' when
        attempting to substitute ${config_shell} for SHELL. On
        NT ${config_shell} may contain a ':' in it.

Wed Aug  6 12:29:05 1997  Jason Merrill  <[email protected]>

        * Makefile.in (EXTRA_GCC_FLAGS): Fix for non-bash shells.

Wed Aug  6 00:42:35 1997  Ian Lance Taylor  <[email protected]>

        * Makefile.in (AS_FOR_TARGET): Change as.new to as-new.

Tue Aug  5 14:08:51 1997  Ian Lance Taylor  <[email protected]>

        * Makefile.in (NM_FOR_TARGET): Change nm.new to nm-new.

        * ylwrap: If the program is a relative path, force it to be
        absolute.

Tue Aug  5 12:12:44 1997  Andrew Cagney  <[email protected]>

        * configure (tooldir): Set BISON to `bison -y' and not just bison.

Mon Aug  4 22:59:02 1997  Andrew Cagney  <[email protected]>

        * Makefile.in (CC_FOR_TARGET): When winsup/Makefile present,
        correctly specify the target build directory $(TARGET_SUBDIR)/winsup
        for libraries.

Mon Aug  4 12:40:24 1997  Jason Merrill  <[email protected]>

        * Makefile.in (EXTRA_GCC_FLAGS): Fix handling of macros with values
        separated by spaces.

Thu Jul 31 19:49:49 1997  Ian Lance Taylor  <[email protected]>

        * ylwrap: New file.
        * Makefile.in (DEVO_SUPPORT): Add ylwrap.

        * ltmain.sh: Handle /bin/sh at start of install program.

        * Makefile.in (DEVO_SUPPORT): Add ltconfig, ltmain.sh, and missing.

        * ltconfig, ltmain.sh: New files, from libtool 1.0.
        * missing: New file, from automake 1.2.

Thu Jul 24 12:57:56 1997  Ian Lance Taylor  <[email protected]>

        * Makefile.in: Treat tix like tk, putting it in X11_MODULES.  Add
        check-tk to CHECK_X11_MODULES.

Wed Jul 23 17:03:29 1997  Ian Lance Taylor  <[email protected]>

        * config.sub: Merge with FSF.

Tue Jul 22 19:08:29 1997  Ian Lance Taylor  <[email protected]>

        * config.guess: Merge with FSF.

Tue Jul 22 14:50:42 1997  Robert Hoehne <[email protected]>

        * configure: Treat msdosdjgpp like go32.
        * configure.in: Likewise.  Don't remove gprof for go32.

        * configure: Change Makefile.tem2 to Makefile.tm2.

Mon Jul 21 10:31:26 1997  Stephen Peters  <[email protected]>

        * configure.in (noconfigdirs): For alpha-dec-osf*, don't ignore grep.

Tue Jul 15 14:33:03 1997  Brendan Kehoe  <[email protected]>

        * install-sh (chmodcmd): Set to null if the DST directory already
        exists.  Same as Nov 11th change.

Mon Jul 14 11:01:15 1997  Martin M. Hunt  <[email protected]>

        * configure (GDB_TK): Needs itcl and tix. 

Mon Jul 14 00:32:10 1997  Jason Merrill  <[email protected]>

        * config.guess: Update from FSF.

Fri Jul 11 11:57:11 1997  Martin M. Hunt  <[email protected]>

        * Makefile.in (GDB_TK): Depend on itcl and tix.

Fri Jul  4 13:25:31 1997  Ian Lance Taylor  <[email protected]>

        * Makefile.in (INSTALL_PROGRAM_ARGS): New variable.
        (INSTALL_PROGRAM): Use $(INSTALL_PROGRAM_ARGS).
        (INSTALL_SCRIPT): New variable.
        (BASE_FLAGS_TO_PASS): Pass down INSTALL_SCRIPT.
        * configure.in: If host is *-*-cygwin32*, set INSTALL_PROGRAM_ARGS
        to -x.
        * install-sh: Add support for -x option.

Mon Jun 30 15:51:30 1997  Ian Lance Taylor  <[email protected]>

        * configure.in, Makefile.in: Treat tix like itcl.

Thu Jun 26 13:59:19 1997  Ian Lance Taylor  <[email protected]>

        * Makefile.in (WINDRES): New variable.
        (WINDRES_FOR_TARGET): New variable.
        (BASE_FLAGS_TO_PASS): Add WINDRES_FOR_TARGET.
        (EXTRA_HOST_FLAGS): Add WINDRES.
        (EXTRA_TARGET_FLAGS): Add WINDRES.
        (EXTRA_GCC_FLAGS): Add WINDRES.
        ($(DO_X)): Pass down WINDRES.
        ($(CONFIGURE_TARGET_MODULES)): Set WINDRES when configuring.
        * configure: Treat WINDRES like DLLTOOL, and WINDRES_FOR_TARGET like
        DLLTOOL_FOR_TARGET.

Wed Jun 25 15:01:26 1997  Felix Lee  <[email protected]>

        * configure.in: configure sim before gdb for win32-x-ppc

Wed Jun 25 12:18:54 1997  Brendan Kehoe  <[email protected]>

        Move gperf into the toplevel, from libg++.
        * configure.in (target_tools): Add target-gperf.
        (native_only): Add target-gperf.
        * Makefile.in (all-target-gperf): New target, depend on
        all-target-libg++.
        (configure-target-gperf): Empty rule.
        (ALL_TARGET_MODULES): Add all-target-gperf.
        (CONFIGURE_TARGET_MODULES): Add configure-target-gperf.
        (CHECK_TARGET_MODULES): Add check-target-gperf.
        (INSTALL_TARGET_MODULES): Add install-target-gperf.
        (CLEAN_TARGET_MODULES): Add clean-target-gperf.

Mon Jun 23 10:51:53 1997  Jeffrey A Law  ([email protected])
 
        * config.sub (mn10200): Recognize new basic machine.

Thu Jun 19 14:16:42 1997  Brendan Kehoe  <[email protected]>

        * configure.in: Don't set ENABLE_MULTILIB, so we'll be passing
        --enable-multilib down to subdirs; setting TARGET_SUBDIR was enough.

Tue Jun 17 15:31:20 1997  Brendan Kehoe  <[email protected]>

        * configure.in: If we're building mips-sgi-irix6* native, turn on
        ENABLE_MULTILIB and set TARGET_SUBDIR.

Tue Jun 17 12:20:59 1997  Tom Tromey  <[email protected]>

        * Makefile.in (all-sn): Depend on all-grep.

Mon Jun 16 11:11:10 1997  Ian Lance Taylor  <[email protected]>

        * configure.in: Use mh-ppcpic and mt-ppcpic for powerpc*-* targets.

        * configure: Set CFLAGS and CXXFLAGS, and substitute them into
        Makefile.  From Jeff Makey <[email protected]>.
        * Makefile.in: Add comment for CFLAGS and CXXFLAGS.

        * Makefile.in (DISTBISONFILES): Remove.
        (taz): Don't futz with DISTBISONFILES.  Change BISON to use
        $(DEFAULT_YACC).

        * configure.in: Build itl, db, sn, etc., when building for native
        cygwin32.

        * Makefile.in (LD): New variable.
        (EXTRA_HOST_FLAGS): Pass down LD.
        ($(DO_X)): Likewise.

Mon Jun 16 11:10:35 1997  Philip Blundell  <[email protected]>

        * Makefile.in (INSTALL): Use $(SHELL) when executing install-sh.

Fri Jun 13 10:22:56 1997  Bob Manson  <[email protected]>

        * configure.in (targargs): Strip out any supplied --build argument
        before adding our own. Always add --build.

Thu Jun 12 21:12:28 1997  Bob Manson  <[email protected]>

        * configure.in (targargs): Pass --build if we're doing
        a cross-compile.

Fri Jun  6 21:38:40 1997  Rob Savoye  <[email protected]>

        * configure: Use '|' instead of ":" as the seperator in
        sed. Otherwise sed chokes on NT path names with drive
        designators. Also look for "?:*" as the leading characters in an
        absolute pathname.

Mon Jun  2 13:05:20 1997  Gavin Koch  <[email protected]>

        * config.sub: Support for r3900.

Wed May 21 17:33:31 1997  Ian Lance Taylor  <[email protected]>

        * configure.in: Use install-sh, not install.sh.

Wed May 14 16:06:51 1997  Ian Lance Taylor  <[email protected]>

        * Makefile.in (taz): Improve check for BISON so it doesn't try to
        apply it twice.

Fri May  9 17:22:05 1997  Ian Lance Taylor  <[email protected]>

        * Makefile.in (INSTALL_MODULES): Put install-opcodes before
        install-binutils.

Thu May  8 17:29:50 1997  Ian Lance Taylor  <[email protected]>

        * Makefile.in: Add automake targets.
        * configure.in (host_tools): Add automake.

start-sanitize-ide
Thu May  8 17:09:12 1997  Ian Lance Taylor  <[email protected]>

        * Makefile.in (all-libide): Depend upon all-ilu.

end-sanitize-ide
Tue May  6 15:49:52 1997  Ian Lance Taylor  <[email protected]>

        * configure: Default CXX to c++, not gcc.
        * Makefile.in (CXX): Set to c++, not gcc.
        (CXX_FOR_TARGET): When cross, transform c++, not gcc.

start-sanitize-ide
Tue May  6 11:23:57 1997  Ian Lance Taylor  <[email protected]>

        * Makefile.in: Add ILU targets.
        * configure.in (host_tools): Add ILU.

end-sanitize-ide
Thu May  1 10:11:43 1997  Geoffrey Noer  <[email protected]>

        * install-sh: try appending a .exe if source file doesn't
        exist

Wed Apr 30 12:05:36 1997  Jason Merrill  <[email protected]>

        * configure.in: Turn on multilib by default.
        (cross_only): Remove target-libiberty.

        * Makefile.in (all-gcc): Don't depend on libiberty.

start-sanitize-ide
Tue Apr 29 11:26:36 1997  Tom Tromey  <[email protected]>

        * configure.in (host_tools): Added vmake.

end-sanitize-ide
Mon Apr 28 18:39:45 1997  Michael Snyder  <[email protected]>

        * config.guess: improve algorithm for recognizing Gnu Hurd x86.

Thu Apr 24 19:30:07 1997  Ian Lance Taylor  <[email protected]>

        * Makefile.in (DEVO_SUPPORT): Add mpw-install.
        (DISTBISONFILES): Add ld/Makefile.in

Tue Apr 22 17:17:28 1997  Geoffrey Noer  <[email protected]>

        * configure.in: if target is cygwin32 but host isn't cygwin32,
        don't configure gdb tcl tk expect, not just gdb.

Mon Apr 21 13:33:39 1997  Tom Tromey  <[email protected]>

        * configure.in: Added gnuserv everywhere sn appears.

        * Makefile.in (ALL_MODULES): Added all-gnuserv.
        (CROSS_CHECK_MODULES): Added check-gnuserv.
        (INSTALL_MODULES): Added install-gnuserv.
        (CLEAN_MODULES): Added clean-gnuserv.
        (all-gnuserv): New target.

start-sanitize-ide
Fri Apr 18 18:10:44 1997  Tom Tromey  <[email protected]>

        * configure.in (host_libs): Added libide.
        Skip libide, vmake if no X.  Also skip these everywhere that sn is
        skipped.

        * Makefile.in (ALL_MODULES): Added all-vmake, all-libide.
        (CROSS_CHECK_MODULES): Added check-vmake, check-libide.
        (INSTALL_MODULES): Added install-vmake, install-libide.
        (CLEAN_MODULES): Added clean-vmake, clean-libide.
        (all-vmake, all-libide): New targets.

end-sanitize-ide
Thu Apr 17 13:57:06 1997  Per Fogelstrom  <[email protected]>

        * config.guess: Fixes for MIPS OpenBSD systems.

Tue Apr 15 12:21:07 1997  Ian Lance Taylor  <[email protected]>

        * Makefile.in (INSTALL_XFORM): Remove.
        (BASE_FLAGS_TO_PASS): Remove INSTALL_XFORM.

        * mkinstalldirs: New file, copied from automake.
        * Makefile.in (installdirs): Rename from install-dirs.  Use
        mkinstalldirs.  Change all users.
        (DEVO_SUPPORT): Add mkinstalldirs.

Mon Apr 14 11:21:38 1997  Ian Lance Taylor  <[email protected]>

        * install-sh: Rename from install.sh.
        * Makefile.in (INSTALL): Change install.sh to install-sh.
        (DEVO_SUPPORT): Likewise.

        * configure: Use ${config_shell} with ${moveifchange}.  From Thomas
        Graichen <[email protected]>.

Fri Apr 11 16:37:10 1997  Niklas Hallqvist  <[email protected]>

        * config.guess: Recognize OpenBSD systems correctly.

Fri Apr 11 17:07:04 1997  Jason Molenda  ([email protected])

        * README, Makefile.in (ETC_SUPPORT): Remove references to
        cfg-paper*, configure.{texi,man,info*}._

Sun Apr  6 18:47:57 1997  Andrew Cagney  <[email protected]>

        * Makefile.in (all.normal): Ensure that gcc is built after all
        the x11 - ie gdb - targets.

Tue Apr  1 16:28:50 1997  Klaus Kaempf  <[email protected]>

        * makefile.vms: Don't run conf-a-gas.

Mon Mar 31 16:26:55 1997  Joel Sherrill  <[email protected]>

        * configure.in (hppa1.1-*-rtems*): New target, like hppa-*-*elf*.

start-sanitize-tic80
Sun Mar 30 12:38:27 1997  Fred Fish  <[email protected]>

        * configure.in: Remove noconfigdirs case since gdb also
        configures and builds for tic80-coff.

end-sanitize-tic80
Fri Mar 28 18:28:52 1997  Ian Lance Taylor  <[email protected]>

        * configure: Set cache_file to config.cache.
        * Makefile.in (local-distclean): Remove config.cache.

Wed Mar 26 18:49:39 1997  Ian Lance Taylor  <[email protected]>

        * COPYING: Update FSF address.

start-sanitize-tic80
Wed Mar 26 10:38:25 1997  Michael Meissner  <[email protected]>

        * configure.in (tic80-*-*): Remove G++ libraries and libgloss from
        noconfigdirs.

end-sanitize-tic80
Mon Mar 24 15:02:39 1997  Ian Lance Taylor  <[email protected]>

        * Makefile.in (install-dirs): Don't crash if prefix, and hence
        MAKEDIRS, is empty.

Mon Mar 24 12:40:55 1997  Doug Evans  <[email protected]>

        * config.sub: Tweak mn10300 entry.

Fri Mar 21 15:35:27 1997  Michael Meissner  <[email protected]>

        * configure.in (host_tools): Put sim before gdb, so gdb's
        configure.tgt can determine if the simulator was configured.

Sun Mar 16 16:07:08 1997  Fred Fish  <[email protected]>

        * config.sub: Move BeOS $os case to be with other Cygnus
        local cases.

Sun Mar 16 01:34:55 1997  Martin Hunt <[email protected]>

        * config.sub: Remove misplaced comment that broke Linux.

Sat Mar 15 22:50:15 1997  Fred Fish  <[email protected]>

        * config.sub: Add BeOS support.

Mon Mar 10 13:30:11 1997  Tom Tromey  <[email protected]>

        * Makefile.in (CHECK_X11_MODULES): Don't run check-tk.

Wed Mar  5 12:09:29 1997  Martin  <[email protected]>

        * configure.in (noconfigdirs): Remove tcl and tk from
        noconfigdirs for cygwin32 builds.

start-sanitize-tic80
Fri Feb 28 18:20:15 1997  Fred Fish  <[email protected]>

        * configure.in (tic80-*-*): Remove ld from noconfigdirs.

end-sanitize-tic80
Thu Feb 27 14:57:26 1997  Ken Raeburn  <[email protected]>

        * Makefile.in (GAS_SUPPORT_DIRS, BINUTILS_SUPPORT_DIRS): Remove
        make-all.com, use makefile.vms instead.

Tue Feb 25 18:46:14 1997  Stan Shebs  <[email protected]>

        * config.sub: Accept -lnews*.

start-sanitize-d30v
Tue Feb 25 13:19:14 1997  Andrew Cagney  <[email protected]>

        * configure.in (noconfigdirs): Disable target-newlib,
        target-examples and target-libiberty for d30v.

end-sanitize-d30v
start-sanitize-tic80
Tue Feb 25 11:41:51 1997  Tom Tromey  <[email protected]>

        * configure.in (host_libs): Build itcl after tcl, tk.

        * configure.in (host_libs): Added db, itcl.
        (host_tools): Added sn.
        (noconfigdirs): Added itcl, db, sn in appropriate places.
        (native_only): Added sn.

        * Makefile.in (all-db, all-sn): New targets.
        (ALL_MODULES): Added all-sn.
        (CROSS_CHECK_MODULES): Added check-sn.
        (INSTALL_MODULES): Added install-sn.
        (CLEAN_MODULES): Added clean-sn.

end-sanitize-tic80
start-sanitize-d30v
Fri Feb 21 17:56:25 1997  Martin M. Hunt  <[email protected]>

        * configure.in (noconfigdirs): Enable ld for d30v.

end-sanitize-d30v
start-sanitize-tic80
Fri Feb 21 20:58:51 1997  Michael Meissner  <[email protected]>

        * configure.in (tic80-*-*): Build compiler.

end-sanitize-tic80
start-sanitize-d30v
Sun Feb 16 15:41:09 1997  Andrew Cagney  <[email protected]>

        * configure.in (d30v-*): Remove sim directory from list of
        unsupported d30v directories

end-sanitize-d30v
start-sanitize-d30v
Tue Feb 18 17:32:42 1997  Martin M. Hunt  <[email protected]>

        * config.sub, configure.in: Add d30v target cpu. 
        
end-sanitize-d30v
Thu Feb 13 22:04:44 1997  Klaus Kaempf  <[email protected]>

        * makefile.vms: New file.
        * make-all.com: Remove.

Wed Feb 12 12:54:18 1997  Jim Wilson  <[email protected]>

        * Makefile.in (EXTRA_GCC_FLAGS): Add LIBGCC2_DEBUG_CFLAGS.

start-sanitize-r5900
Fri Feb  7 16:39:29 1997  Gavin Koch  <[email protected]>

        * config.sub, configure.in: add r5900

end-sanitize-r5900        
Sat Feb  8 20:36:49 1997  Michael Meissner  <[email protected]>

        * Makefile.in (all-itcl): The rule is all-itcl, not all-tcl.

Tue Feb  4 11:39:29 1997  Tom Tromey  <[email protected]>

        * Makefile.in (ALL_MODULES): Added all-db.
        (CROSS_CHECK_MODULES): Addec check-db.
        (INSTALL_MODULES): Added install-db.
        (CLEAN_MODULES): Added clean-db.

Mon Feb  3 13:29:36 1997  Ian Lance Taylor  <[email protected]>

        * config.guess: Merge with latest FSF sources.

Tue Jan 28 09:20:37 1997  Tom Tromey  <[email protected]>

        * Makefile.in (ALL_MODULES): Added all-itcl.
        (CROSS_CHECK_MODULES): Added check-itcl.
        (INSTALL_MODULES): Added install-itcl.
        (CLEAN_MODULES): Added clean-itcl.

Thu Jan 23 01:44:27 1997  Geoffrey Noer  <[email protected]>

        * configure.in: build gdb for mn10200

Fri Jan 17 15:32:15 1997  Doug Evans  <[email protected]>

        * Makefile.in (all-target-winsup): Depend on all-target-libio.

start-sanitize-tic80
Mon Jan 13 22:46:54 1997  Michael Meissner  <[email protected]>

        * configure.in (tic80-*-*): Turn off most targets right now.

end-sanitize-tic80
Fri Jan  3 16:04:03 1997  Ian Lance Taylor  <[email protected]>

        * Makefile.in (MAKEINFO): Check for the existence of the Makefile,
        rather than the makeinfo program.
        (do-info): Depend upon all-texinfo.

Tue Dec 31 16:00:31 1996  Ian Lance Taylor  <[email protected]>

        * configure.in: Remove uses of config/mh-linux.

        * config.sub, config.guess: Merge with latest FSF sources.

start-sanitize-tic80
Fri Dec 27 23:04:33 1996  Fred Fish  <[email protected]>

        * config.sub (case $basic_machine): Add tic80 entries.

end-sanitize-tic80
Fri Dec 27 12:07:59 1996  Ian Lance Taylor  <[email protected]>

        * config.sub, config.guess: Merge with latest FSF sources.

Wed Dec 18 22:46:39 1996  Stan Shebs  <[email protected]>

        * mpw-build.in: Build ld before gcc, use NewFolderRecursive.
        * mpw-config.in: Test for NewFolderRecursive.
        * mpw-install: Use symbolic name for startup filename.
        * mpw-README: Add various additional details.

Wed Dec 18 13:11:46 1996  Jim Wilson  <[email protected]>

        * configure.in (mips*-sgi-irix6*): Remove binutils from noconfigdirs.

Wed Dec 18 10:29:31 1996  Jeffrey A Law  ([email protected])

        * configure.in: Do build gcc and the target libraries for
        the mn10200.

Wed Dec  4 16:53:05 1996  Geoffrey Noer  <[email protected]>

        * configure.in: don't avoid building gdb for mn10300 any more
        * Makefile.in: double-quote GCC_FOR_TARGET line in EXTRA_GCC_FLAGS
        instead of single-quoting it.

Tue Dec  3 23:26:50 1996  Jason Merrill  <[email protected]>

        * configure.in: Don't use --with-stabs on IRIX 6.

Tue Dec  3 09:05:25 1996  Doug Evans  <[email protected]>

        * configure.in (m32r): Build gdb, libg++ now.

Sun Dec  1 00:18:59 1996  Peter Schauer  ([email protected])

        * configure.in (mips*-sgi-irix6*):  Remove gdb and related
        directories from noconfigdirs.

Tue Nov 26 11:45:33 1996  Kim Knuttila  <[email protected]>

        * config.sub (basic_machine): added mips16 configuration

Sat Nov 23 19:26:22 1996  Michael Meissner  <[email protected]>

        * config.sub: Handle d10v-unknown.

Sat Nov 23 14:23:01 1996  Gavin Koch  <[email protected]>

        * gcc/depragmaize.c: Handle MSDOS's (non-unix) text files.

Sat Nov 23 10:23:01 1996  Gavin Koch  <[email protected]>

        * config.sub: Handle v850-unknown.

Thu Nov 21 16:19:44 1996  Geoffrey Noer  <[email protected]>

        * Makefile.in: add findutils
        * configure.in: add findutils to list of host_tools

Wed Nov 20 10:09:01 1996  Jeffrey A Law  ([email protected])

        * config.sub: Handle mn10200 and mn10300.

Tue Nov 19 16:35:14 1996  Michael Meissner  <[email protected]>

        * configure.in (d10v-*): Do not build librx.

Mon Nov 18 13:28:41 1996  Jeffrey A Law  ([email protected])

        * configure.in (mn10300): Build everything except gdb & libgloss.

Wed Nov 13 14:59:46 1996  Per Bothner  <[email protected]>

        * config.guess:  Patch for Dansk Data Elektronik servers,
        from Niels Skou Olsen <[email protected]>.

        For ncr, use /bin/uname rather than uname, since GNU uname does not
        support -p.  Suggested by Mark Mitchell <[email protected]>.

        Patch for MIPS R4000 running System V,
        from Eric S. Raymond <[email protected]>.

        Fix thinko for nextstep.

        Patch for OSF1 in i?86, from Dan Murphy <[email protected]> via Harlan Stenn.

        Sat Jun 24 18:58:17 1995  Morten Welinder  <[email protected]>
        * config.guess: Guess mips-dec-mach_bsd4.3.

        Thu Oct 10 04:07:04 1996  Harlan Stenn <[email protected]>
        * config.guess (i?86-ncr-sysv*):  Emit just enough of the minor
        release numbers.
        * config.guess (mips-mips-riscos*):  Emit just enough of the
        release number.

        Tue Oct  8 10:37:22 1996  Frank Vance <[email protected]>
        * config.guess (sparc-auspex-sunos*):  Added.
        (f300-fujitsu-*): Added.

        Wed Sep 25 22:00:35 1996  Jeff Woolsey <[email protected]>
        * config.guess:  Recognize a Tadpole as a sparc.

Wed Nov 13 00:53:09 1996  David J. MacKenzie  <[email protected]>

        * config.guess: Don't assume that NextStep version is either 2 or
        3.  NextStep 4 (aka OpenStep 4) has come out now.

Mon Nov 11 23:52:03 1996  David J. MacKenzie  <[email protected]>

        * config.guess: Support Cray T90 that reports itself as "CRAY TS".
        From Rik Faith <[email protected]>.

Fri Nov  8 11:34:58 1996  David J. MacKenzie  <[email protected]>

        * config.sub: Contributions from bug-gnu-utils to:
        Support plain "hppa" (no version given) architecture, reported by
        OpenStep.
        OpenBSD like NetBSD.
        LynxOs is not a hardware supplier.

        * config.guess: Contributions from bug-gnu-utils to add support for:
        OpenBSD like NetBSD.
        Stratus systems.
        More Pyramid systems.
        i[n>4]86 Intel chips.
        M680[n>4]0 Motorola chips.
        Use unknown instead of lynx for hardware manufacturer.

Mon Nov 11 10:09:08 1996  Brendan Kehoe  <[email protected]>

        * install.sh (chmodcmd): Set to null if the DST directory already
        exists.

Mon Nov 11 10:43:41 1996  Michael Meissner  <[email protected]>

        * configure.in (powerpc*-{eabi,elf,linux,rtem,sysv,solaris}*): Do
        not use mt-ppc target Makefile fragment any more.

Sun Nov  3 19:17:07 1996  Stu Grossman  ([email protected])

        * configure.in (*-*-windows):  Exclude everything but those dirs
        needed to build windows.

Tue Oct 29 16:41:31 1996  Doug Evans  <[email protected]>

        * Makefile.in (all-target-winsup): Depend on all-target-librx.

Mon Oct 28 17:32:46 1996  Stu Grossman  ([email protected])

        * configure.in:  Exclude mmalloc from i386-windows.
        * config/mh-windows:  Add rules for building MSVC makefiles.

Thu Oct 24 09:22:46 1996  Stu Grossman  ([email protected])

        * Undo my previous change.

Thu Oct 24 12:12:04 1996  Ian Lance Taylor  <[email protected]>

        * Makefile.in (EXTRA_GCC_FLAGS): Pass down GCC_FOR_TARGET
        unconditionally.
        (MAKEOVERRIDES): Define (revert this part of October 18 change).

Thu Oct 24 09:02:07 1996  Stu Grossman  ([email protected])

        * Makefile.in (FLAGS_TO_PASS):  Add $(HOST_FLAGS) to allow the
        host to add it's own flags.
        * config/mh-windows (HOST_FLAGS):  Set srcroot, which is needed
        for MSVC build procedure.

Tue Oct 22 15:20:26 1996  Ian Lance Taylor  <[email protected]>

        * configure: Handle GCC_FOR_TARGET like CC_FOR_TARGET.

Fri Oct 18 13:37:13 1996  Ian Lance Taylor  <[email protected]>

        * Makefile.in (CC_FOR_TARGET): Check for xgcc, not Makefile.
        (CXX_FOR_TARGET): Likewise.
        (GCC_FOR_TARGET): Define.
        (BASE_FLAGS_TO_PASS): Remove GCC_FOR_TARGET.
        (EXTRA_GCC_FLAGS): Define GCC_FOR_TARGET based on whether
        CC_FOR_TARGET was specified on the command line.
        (MAKEOVERRIDES): Don't define.

Thu Oct 17 10:27:56 1996  Doug Evans  <[email protected]>

        * configure.in (m32r): Fix spelling of libg++ libs.

Thu Oct 10 10:37:17 1996  Stan Shebs  <[email protected]>

        * config.sub (-apple*): Remove, now redundant.

Thu Oct 10 12:30:54 1996  Ian Lance Taylor  <[email protected]>

        * configure: Don't get confused by CPU-VENDOR-linux-gnu.

        * configure: Rework yesterday's sed script patch.

        * config.sub: Merge with FSF.

Wed Oct  9 17:24:59 1996  Per Bothner  <[email protected]>

        * config.guess:  Merge from FSF.

        1996-09-12  Richard Stallman  <[email protected]>
        * config.guess: Use pc instead of unknown, for pc clone systems.
        Change linux to linux-gnu.

        Mon Jul 15 23:51:11 1996  Karl Heuer  <[email protected]>
        * config.guess: Avoid non-portable tr syntax.

Wed Oct  9 06:06:46 1996  Jeffrey A Law  ([email protected])

        * test-build.mk (HOLES): Add "xargs" for gdb.

        * configure: Avoid hpux10.20 sed bug.

Tue Oct  8 08:32:48 1996  Stu Grossman  ([email protected])

        * configure.in config/mh-windows:  Add support for windows host
        (that is a build done under the Microsoft build environment).

Tue Oct  8 10:39:08 1996  Ian Lance Taylor  <[email protected]>

        * Makefile.in: Replace all uses of srcroot with s, to shrink
        command line lengths.

        Patches from Geoffrey Noer <[email protected]>:
        * configure.in: If configuring for newlib, pass --with-newlib to
        subdirectories.
        * Makefile.in (CC_FOR_TARGET): If winsup/Makefile exists, pass a
        -Bnewlib/ and -Lwinsup to gcc.
        (CXX_FOR_TARGET): Likewise.

Mon Oct  7 10:59:35 1996  Ian Lance Taylor  <[email protected]>

        * Makefile.in (ETC_SUPPORT): Add configure.

Fri Oct  4 12:22:58 1996  Angela Marie Thomas ([email protected])

        * configure.in: Use config/mh-dgux386 for i[345]86-dg-dgux 
        host configuration file.

Thu Oct  3 09:28:25 1996  Jeffrey A Law  ([email protected])

        * configure.in: Break mn10x00 support into separate
        mn10200 and mn10300 configurations.
        * config.sub: Likewise.

Wed Oct  2 22:27:52 1996  Jeffrey A Law  ([email protected])

        * configure.in: Add lots of stuff to noconfigdirs for
        the mn10x00 targets.

        * config.sub, configure.in: Add mn10x00 support.

Wed Oct  2 15:52:36 1996  Klaus Kaempf  <[email protected]>

        * make-all.com: Call conf-a-gas, not config-a-gas.

Tue Oct  1 01:28:41 1996  James G. Smith  <[email protected]>

        * configure.in (noconfigdirs): Don't build libgloss for arm-coff
        targets.

Mon Sep 30 14:24:01 1996  Stan Shebs  <[email protected]>

        * mpw-README: Add much more detail for native PowerMac.
        * mpw-install: New file.
        * mpw-configure: Add --norecursion and --help options.
        * mpw-config.in: Translate readme and install files when
        copying to objdir.
        * mpw-build.in: Don't always depend on byacc and flex.
        (install-only-top): New action.

Fri Sep 27 17:39:44 1996  Stu Grossman  ([email protected])

        * configure.in:  You can now configure GDB for the v850.

Tue Sep 24 19:05:12 1996  Stan Shebs  <[email protected]>

        * configure.in (noconfigdirs): Don't configure any C++ dirs
        if targeting D10V.

Tue Sep 17 12:15:31 1996  Ian Lance Taylor  <[email protected]>

        * config.sub: Recognize mips64vr5000.

Mon Sep 16 17:00:52 1996  Ian Lance Taylor  <[email protected]>

        * configure.in: Use a single line for host_tools and native_only.

Mon Sep  9 12:21:30 1996  Doug Evans  <[email protected]>

        * config.sub, configure.in: Add entries for m32r.

Thu Sep  5 13:52:47 1996  Tom Tromey  <[email protected]>

        * Makefile.in (inet-install): Don't run install-gzip.

Wed Sep  4 17:26:13 1996  Stu Grossman  ([email protected])

        * configure.in:  Don't config lots of things for *-*-windows*.

Sat Aug 31 11:45:57 1996  Stan Shebs  <[email protected]>

        * mpw-config.in: Test for mpw-true, true, and null-command scripts.
        (host_libs, host_tools): Copy from configure.in.
        * mpw-configure: Don't complain about directories not found.

Thu Aug 29 16:44:58 1996  Michael Meissner  <[email protected]>

        * configure.in (i[345]86): Recognize i686 for pentium pro.
        (i[3456]86-*-dgux*): Use config/mh-sysv for the host configuration
        file.

        * config.guess (i[345]86): Ditto.

Mon Aug 26 18:34:42 1996  Martin M. Hunt  <[email protected]>

        * configure.in (noconfigdirs): Removed gdb for D10V.

Thu Aug 22 17:13:52 1996  Jeffrey A Law  ([email protected])

        * configure.in: Remove ld, target-libio, target-libg++, and
        target-libstdc++ from noconfigdirs.

Wed Aug 21 18:56:38 1996  Fred Fish  <[email protected]>

        * configure: Fix three locations where shell scripts were
        being run directly rather than with config_shell.

Tue Aug 20 13:08:47 1996  J.T. Conklin  <[email protected]>

        * configure.in (v850-*-*): Set up initial $noconfigdirs.
        * config.sub (basic_machine): Recognize v850.

Thu Aug 15 12:19:33 1996  Stan Shebs  <[email protected]>

        * mpw-configure: Handle multiple enable/disable options and
        pass them down recursively, handle -c and -s flags appropriately
        depending on choice of compiler, add escape mechanism for
        quoted arguments to gC.

Mon Aug 12 13:15:13 1996  Michael Meissner  <[email protected]>

        * configure.in (powerpc*-*-*): For eabi, system V.4, Linux, and
        solaris targets, use config/mt-ppc to set C{,XX}FLAGS_FOR_TARGETS
        so that -mrelocatable-lib and -mno-eabi are used.

        * Makefile.in (CONFIGURE_TARGET_MODULES): If target compiler does
        not support --print-multi-lib, don't abort.

Sun Aug 11 20:51:50 1996  Stu Grossman  ([email protected])

        * config/mh-cygwin32 (CFLAGS):  Define _WIN32 to be compatible
        with normal Windows compilation environment.

Thu Aug  8 12:18:59 1996  Klaus Kaempf  <[email protected]>

        * make-all.com: Run config-a-gas.
        * setup.com: Don't copy subdirectory files around.

Tue Jul 30 17:49:31 1996  Brendan Kehoe  <[email protected]>

        * configure.in (*-*-ose): Remove exclusion of libgloss for this
        target, it now compiles correctly.

Sat Jul 27 15:10:43 1996  Stan Shebs  <[email protected]>

        * mpw-config.in: Generate Mac include for elf/dwarf2.h.

Tue Jul 23 10:47:04 1996  Martin M. Hunt  <[email protected]>

        * configure.in (d10v-*-*): Remove ld from $noconfigdirs. 

Mon Jul 22 13:28:51 1996  Brendan Kehoe  <[email protected]>

        * configure.in (native_only): Add prms.

Mon Jul 22 12:27:58 1996  Ian Lance Taylor  <[email protected]>

        * Makefile.in (GAS_SUPPORT_DIRS): Add make-all.com and setup.com.
        (BINUTILS_SUPPORT_DIRS): Likewise.

Thu Jul 18 12:55:40 1996  Michael Meissner  <[email protected]>

        * configure.in (d10v-*-*): Don't configure ld or gdb until the
        d10v support is added.

Wed Jul 17 14:33:09 1996  Martin M. Hunt  <[email protected]>

        * configure.in (d10v-*-*): New target.

Mon Jul 15 11:53:00 1996  Jeffrey A Law  ([email protected])

        * config.guess (HP 9000/811): Recognize this as a PA1.1
        machine.

Fri Jul 12 23:21:17 1996  Ken Raeburn  <[email protected]>

        * Makefile.in (do-tar-gz): New target, split out from tail end of
        taz target.  Run each command separately, don't use pipes.
        (taz): Use it.

Fri Jul 12 12:08:04 1996  Stan Shebs  <[email protected]>

        * mpw-configure: Look for g-mpw-make.sed in config/mpw.
        * mpw-build.in: No builds should depend on building byacc or flex,
        they are assumed to be installed already.

Fri Jul 12 09:52:52 1996  Michael Meissner  <[email protected]>

        * Makefile.in (CONFIGURE_TARGET_MODULES): Set r environment
        variable that CC_FOR_TARGET needs.

Thu Jul 11 10:09:45 1996  Michael Meissner  <[email protected]>

        * Makefile.in (CONFIGURE_TARGET_MODULES): Determine if the multlib
        options have changed since the last time the subdirectory was
        configured, and if it has, reconfigure.
        (CLEAN_TARGET_MODULES): Delete multilib.out and tmpmulti.out, which
        CONFIGURE_TARGET_MODULES uses to remember the old multilib options.

Wed Jul 10 18:56:59 1996  Doug Evans  <[email protected]>

        * Makefile.in (ALL_MODULES,CROSS_CHECK_MODULES,INSTALL_MODULES,
        CLEAN_MODULES): Add bash.
        (all-bash): New target.

Mon Jul  8 17:33:14 1996  Jim Wilson  <[email protected]>

        * configure.in (mips-sgi-irix6*): Use mh-irix6 instead of mh-irix5.

Mon Jul  1 13:31:35 1996  Michael Meissner  <[email protected]>

        * config.sub (basic_machine): Recognize d10v as a valid processor.

Fri Jun 28 12:14:35 1996  Stan Shebs  <[email protected]>

        * mpw-configure: Add support for --bindir.
        * mpw-build.in: Use a GCC-specific build script for GCC actions.

Wed Jun 26 17:20:12 1996  Geoffrey Noer  <[email protected]>

        * configure.in: add bash, time, gawk to list of hosttools and things
        to only build for native toolchains

Tue Jun 25 23:09:03 1996  Jason Molenda  ([email protected])

        * Makefile.in (docdir): Remove.

Tue Jun 25 19:00:08 1996  Jason Molenda  ([email protected])

        * Makefile.in (datadir): Set to $(prefix)/share.

Mon Jun 24 23:26:07 1996  Geoffrey Noer  <[email protected]>

        * configure.in: build diff and patch for cygwin32-hosted
        toolchains.

Mon Jun 24 15:01:12 1996  Joel Sherrill  <[email protected]>

        * config.sub: Accept -rtems*.

Sun Jun 23 22:41:54 1996  Geoffrey Noer  <[email protected]>

        * configure.in: enable dosrel for cygwin32-hosted builds,
                remove diff from the list of things not buildable
                via Canadian Cross

Sat Jun 22 11:39:01 1996  Jason Merrill  <[email protected]>

        * Makefile.in (TARGET_SUBDIR): Move comment to previous line so we
        don't get ". ".

Fri Jun 21 17:24:48 1996  Jim Wilson  <[email protected]>

        * configure.in (mips*-sgi-irix6*): Set noconfigdirs appropriately.

Thu Jun 20 16:57:40 1996  Ken Raeburn  <[email protected]>

        * Makefile.in (taz): Handle case where tex3patch didn't even get
        checked out.  Also, if it was found, put the symlink in a new util
        subdirectory.

Thu Jun 20 12:20:33 1996  Michael Meissner  <[email protected]>

        * config.guess (*:Linux:*:*): Add support for PowerPC Linux.

Tue Jun 18 14:24:12 1996  Klaus Kaempf  ([email protected])

        * config.sub: Recognize -openvms.
        * configure.in (alpha*-*-*vms*): Set noconfigdirs.
        * make-all.com, setup.com: New files.

Mon Jun 17 16:34:46 1996  Jason Merrill  <[email protected]>

        * Makefile.in (taz): tex3patch moved to texinfo/util.

Sat Jun 15 17:13:25 1996  Geoffrey Noer <[email protected]>

start-sanitize-gdbtk
        * configure: enable_gdbtk=no for cygwin32-hosted toolchains
end-sanitize-gdbtk
        * configure.in: remove make from disable-if-Can-Cross list
                enable gdb if ${host} and ${target} are cygwin32

Fri Jun  7 18:16:52 1996  Harlan Stenn <[email protected]>

        * config.guess (i?86-ncr-sysv*):  Emit minor release numbers.
        Recognize the NCR 4850 machine and NCR Pentium-based platforms.

Wed Jun  5 00:09:17 1996  Per Bothner  <[email protected]>

        * config.guess:  Combine mips-mips-riscos cases, and use cpp to
        distinguish sysv/svr4/bsd variants.
        Based on a patch from Harlan Stenn <[email protected]>.

Fri Jun  7 14:24:49 1996  Tom Tromey  <[email protected]>

        * configure.in: Added copyright notice.
        * move-if-change: Added copyright notice.

Thu Jun  6 16:27:05 1996  Michael Meissner  <[email protected]>

        * configure.in (powerpcle-*-solaris*): Until we get shared
        libraries working, don't build gdb, sim, make, tcl, tk, or
        expect.

Tue Jun  4 20:41:45 1996  Per Bothner  <[email protected]>

        * config.guess:  Merge with FSF:

        Mon Jun  3 08:49:14 1996  Karl Heuer  <[email protected]>
        * config.guess (*:Linux:*:*): Add guess for sparc-unknown-linux.

        Fri May 24 18:34:53 1996  Roland McGrath  <[email protected]>
        * config.guess (AViiON:dgux:*:*): Fix typo in recognizing mc88110.

        Fri Apr 12 20:03:59 1996  Per Bothner  <[email protected]>
        * config.guess:  Combine two OSF1 rules.
        Also recognize field test versions.  From [email protected].
        * config.guess (dgux):  Use /usr/bin/uname rather than uname,
        because GNU uname does not support -p.  From [email protected].

Tue Jun  4 11:07:25 1996  Tom Tromey  <[email protected]>

        * Makefile.in (MAKEDIRS): Removed $(tooldir).

Tue May 28 12:30:50 1996  Stan Shebs  <[email protected]>

        * mpw-README: Document GCCIncludes.

Sun May 26 15:16:27 1996  Fred Fish  <[email protected]>

        * configure.in (alpha-*-linux*): Set enable_shared to yes.

Tue May 21 15:41:39 1996  Stan Shebs  <[email protected]>

        * mpw-configure: Handle --enable-FOO and --disable-FOO.

Mon May 20 10:12:29 1996  Geoffrey Noer  <[email protected]>

        * configure.in (*-*-cygwin32): Configure make.

Tue May  7 14:19:42 1996  Tom Tromey  <[email protected]>

        * Makefile.in (inet-install): Quote value of INSTALL_MODULES.

Fri May  3 08:57:17 1996  Tom Tromey  <[email protected]>

        * Makefile.in (all-inet): Depend on all-perl.

        * Makefile.in (inet-install): New target.

        * Makefile.in (all-inet): Depend on all-tcl.
        (all-inet): Depend on all-send-pr.

Tue Apr 30 13:55:51 1996  Michael Meissner  <[email protected]>

        * configure.in (powerpcle-*-solaris*): Turn off tk and tcl
        temporarily.

Thu Apr 25 11:48:20 1996  Ian Lance Taylor  <[email protected]>

        * configure.in: Don't configure --with-gnu-ld on AIX.

Thu Apr 25 06:33:36 1996  Michael Meissner  <[email protected]>

        * configure.in (powerpcle-*-solaris*): Turn off gdb temporarily.

Tue Apr 23 09:07:39 1996  Tom Tromey  <[email protected]>

        * Makefile.in (ALL_MODULES): Added all-inet.
        (CROSS_CHECK_MODULES): Added check-inet.
        (INSTALL_MODULES): Added install-inet.
        (CLEAN_MODULES): Added clean-inet.
        (all-indent): New target.

        * configure.in (host_tools): Added inet.
        (native_only): Added inet.
        (noconfigdirs): Added inet.

Fri Apr 19 15:35:29 1996  Ian Lance Taylor  <[email protected]>

        * configure.in: Don't configure libgloss if we are not configuring
        newlib.

Wed Apr 17 19:30:01 1996  Rob Savoye  <[email protected]>

        * configure.in: Don't configure libgloss for unsupported
        architectures.

Tue Apr 16 11:17:05 1996  Michael Meissner  <[email protected]>

        * Makefile.in (CLEAN_MODULES): Add clean-apache.

Mon Apr 15 15:09:05 1996  Tom Tromey  <[email protected]>

        * Makefile.in (ALL_MODULES): Include all-apache.
        (CROSS_CHECK_MODULES): Include check-apache.
        (INSTALL_MODULES): Include install-apache.
        (all-apache): New target.

        * configure.in: Added apache everywhere perl is seen.

Mon Apr 15 14:59:13 1996  Michael Meissner  <[email protected]>

        * Makefile.in: Add support for clean-{module} and
        clean-target-{module} rules.

Wed Apr 10 21:37:41 PDT 1996  Marilyn E. Sander <[email protected]>

        * configure.in (*-*-ose) do not build libgloss.

Mon Apr  8 16:16:20 1996  Michael Meissner  <[email protected]>

        * config.guess (prep*:SunOS:5.*:*): Turn into
        powerpele-unknown-solaris2.

Mon Apr  8 14:45:41 1996  Ian Lance Taylor  <[email protected]>

        * configure.in: Permit --enable-shared to specify a list of
        directories.

Fri Apr  5 08:17:57 1996  Jason Molenda  ([email protected])

        * configure.in (host==solaris): Pass only the first word of $CC
        to /usr/bin/which when checking if we're using /usr/ccs/bin/cc.

Fri Apr  5 03:16:13 1996  Jason Molenda  ([email protected])

        * Makefile.in (BASE_FLAGS_TO_PASS): pass down $(MAKE).

Thu Mar 28 14:11:11 1996  Tom Tromey  <[email protected]>

        * Makefile.in (ALL_MODULES): Include all-perl.
        (CROSS_CHECK_MODULES): Include check-perl.
        (INSTALL_MODULES): Include install-perl.
        (ALL_X11_MODULES): Include all-guile.
        (CHECK_X11_MODULES): Include check-guile.
        (INSTALL_X11_MODULES): Include install-guile.
        (all-perl): New target.
        (all-guile): New target.

        * configure.in (host_tools): Include perl and guile.
        (native_only): Include perl and guile.
        (noconfigdirs): Don't build guile and perl; no ports have been
        done.

Tue Mar 26 21:18:50 1996  Andrew Cagney  <[email protected]>

        * configure (--enable-*): Handle quoted option lists such as
        --enable-sim-cflags='-g0 -O' better.

Thu Mar 21 11:53:08 1996  Michael Meissner  <[email protected]>

        * Makefile.in ({,inst}all-target): New rule so we can make and
        install all of the target directories easily.

Wed Mar 20 18:10:57 1996  Andreas Schwab  <[email protected]>

        * configure.in: Add missing global flag in sed substitution when
        deleting `target-' from ${configdirs}.

Thu Mar 14 19:15:06 1996  Ian Lance Taylor  <[email protected]>

        * Makefile.in (DO_X): Don't get confused if CC contains `=' in an
        option.

        * configure.in (mips*-nec-sysvr4*): Use a host_makefile_frag of
        config/mh-necv4.

        * install.sh: Correct misspelling of transformbasename.

        * config.guess: Recognize mips-*-sysv*.

Mon Mar 11 15:36:42 1996  Dawn Perchik  <[email protected]>

        * config.sub: Recognize mon960.

Sun Mar 10 13:18:38 1996  Ian Lance Taylor  <[email protected]>

        * configure: Restore Canadian Cross handling of BISON and LEX,
        removed in Feb 20 change.

Fri Mar  8 20:07:09 1996  Per Bothner  <[email protected]>

        * README:  Suggestions from Torbjorn Granlund <[email protected]>:
        Mention make install.  Remove the old copyright date as well the
        clumsy and rather pointless copyright on the README file.

Fri Mar  8 17:51:35 1996  Ian Lance Taylor  <[email protected]>

        * Makefile.in ($(CONFIGURE_TARGET_MODULES)): If there is a
        Makefile after running symlink-tree, then run `make distclean' to
        avoid clobbering any generated files in srcdir.

Tue Mar  5 08:21:44 1996  J.T. Conklin  <[email protected]>

        * configure.in (m68k-*-netbsd*): Build everything now.

Wed Feb 28 12:25:46 1996  Jason Merrill  <[email protected]>

        * Makefile.in (taz): Fix quoting.

Tue Feb 27 11:33:57 1996  Doug Evans  <[email protected]>

        * configure.in (sparclet-*-*): Build everything now.

Tue Feb 27 14:31:51 1996  Andreas Schwab  <[email protected]>

        * configure.in (m68k-*-linux*): New host.

Mon Feb 26 14:32:44 1996  Ian Lance Taylor  <[email protected]>

        * configure: Check for bison before byacc.

Tue Feb 20 23:12:35 1996  Stu Grossman  ([email protected])

        * Makefile.in configure:  Change the way LEX and BISON/YACC are
        set.  configure now defines DEFAULT_LEX and DEFAULT_YACC by
        searching PATH.  These are used as fallbacks by Makefile.in if
        flex/bison/byacc aren't in objdir.

Mon Feb 19 11:45:30 1996  Ian Lance Taylor  <[email protected]>

        * Makefile.in: Make everything which depends upon all-bfd also
        depend upon all-opcodes, in case --with-commonbfdlib is used.

Thu Feb 15 19:50:50 1996  Michael Meissner  <[email protected]>

        * configure.in (host *-*-cygwin32): Don't build gdb if we are
        building NT native compilers on Unix.

Thu Feb 15 17:42:25 1996  Ian Lance Taylor  <[email protected]>

        * configure.in: Don't get CC from the host Makefile fragment if we
        can find gcc in PATH, or if this is a Canadian Cross.  Move the
        Solaris test for /usr/ucb/cc to the post target script, just after
        the compiler sanity test.

Wed Feb 14 16:57:40 1996  Ian Lance Taylor  <[email protected]>

        * config.sub: Merge with FSF.

Tue Feb 13 14:27:48 1996  Ian Lance Taylor  <[email protected]>

        * Makefile.in (RPATH_ENVVAR): New variable.
        (REALLY_SET_LIB_PATH): Use it.
        * configure.in: On HP/UX, set RPATH_ENVVAR to SHLIB_PATH.

Mon Feb 12 15:28:49 1996  Doug Evans  <[email protected]>

        * config.sub, configure.in: Recognize sparclet cpu.

Mon Feb 12 15:33:59 1996  Christian Bauernfeind <[email protected]>

        * config.guess:  Support m68k-cbm-sysv4.

Sat Feb 10 12:06:42 1996  Andreas Schwab  <[email protected]>

        * config.guess (*:Linux:*:*): Guess m68k-unknown-linux and
        m68k-unknown-linuxaout from linker help string.  Put quotes around
        $ld_help_string.

Thu Dec  7 09:03:24 1995  Tom Horsley  <[email protected]>

        * config.guess (powerpc-harris-powerunix): Add guess for port
        to new target.

Thu Feb  8 15:37:52 1996  Brendan Kehoe  <[email protected]>

        * config.guess (UNAME_VERSION): Recognize X4.x as an OSF version.

Mon Feb  5 16:36:51 1996  Ian Lance Taylor  <[email protected]>

        * configure.in: If --enable-shared was used, set SET_LIB_PATH to
        $(REALLY_SET_LIB_PATH) in Makefile.
        * Makefile.in (SET_LIB_PATH): New variable.
        (REALLY_SET_LIB_PATH): New variable.
        ($(DO_X)): Use $(SET_LIB_PATH).
        (install.all, gcc-no-fixedincludes, $(ALL_MODULES)): Likewise.
        ($(NATIVE_CHECK_MODULES), $(CROSS_CHECK_MODULES)): Likewise.
        ($(INSTALL_MODULES), $(CONFIGURE_TARGET_MODULES)): Likewise.
        ($(ALL_TARGET_MODULES), $(CHECK_TARGET_MODULES)): Likewise.
        ($(INSTALL_TARGET_MODULES), $(ALL_X11_MODULES)): Likewise.
        ($(CHECK_X11_MODULES), $(INSTALL_X11_MODULES)): Likewise.
        (all-gcc, all-bootstrap, check-gcc, install-gcc): Likewise.
        (install-dosrel): Likewise.
        (all-opcodes): Depend upon all-libiberty.

Sun Feb  4 16:51:11 1996  Steve Chamberlain  <[email protected]>

        * config.guess (*:CYGWIN*): New

Sat Feb  3 10:42:35 1996  Michael Meissner  <[email protected]>

        * Makefile.in (all-target-winsup): All all-target-libiberty.

Fri Feb  2 17:58:56 1996  Michael Meissner  <[email protected]>

        * configure.in (noconfigdirs): Add missing # in front of comment.

Thu Feb  1 14:38:13 1996  Geoffrey Noer  <[email protected]>

        * configure.in: add second pass to things added to noconfigdirs
        so *-gm-magic can exclude libgloss properly.

Thu Feb  1 11:10:16 1996  Stan Shebs  <[email protected]>

        * mpw-configure (extralibs_name, rez_name): Set correctly
        for MWC68K compiler.

        * mpw-README: Add more info on the necessary build tools.

Thu Feb  1 10:22:38 1996  Steve Chamberlain  <[email protected]>

        * configure.in, config.sub: Recognize cygwin32.

Wed Jan 31 14:17:10 1996  Richard Henderson  <[email protected]>

        * config.guess, config.sub: Recognize A/UX.

Wed Jan 31 13:52:14 1996  Ian Lance Taylor  <[email protected]>

        * config.sub: Merge with gcc/config.sub.

Thu Jan 25 11:01:10 1996  Raymond Jou  <[email protected]>

        * mpw-build.in (do-binutils): Add build of stamps.

Thu Jan 25 17:05:26 1996  James G. Smith  <[email protected]>

        * config.sub: Add recognition for mips64vr4100*-* targets.

Wed Jan 24 12:47:55 1996  Brendan Kehoe  <[email protected]>

        * test-build.mk: Add checking of `hpux9' rather than just `hpux'.
        Add creation of gconfigargs with `--enable-shared' turned on.
        ($(host)-stamp-stage2-configured): Pass $(gconfigargs).
        ($(host)-stamp-stage3-configured): Likewise.
        (HOLES): Add chatr and ldd.
        (i386-ncr-sysv4.3*): Add use of /usr/ccs/bin in the PATH and HOLE_DIRS.

Wed Jan 24 20:32:30 1996  Torbjorn Granlund  <[email protected]>

        * configure: Pass --nfp to recursive configures.

Mon Jan 22 10:41:56 1996  Steve Chamberlain  <[email protected]>

        * Makefile.in (DLLTOOL): New.
        (DLLTOOL_FOR_TARGET): New.
        (EXTRA_HOST_FLAGS): Pass down DLLTOOL.
        (EXTRA_TARGET_FLAGS): Ditto.
        (EXTRA_GCC_FLAGS): Ditto.
        (CONFIGURE_TARGET_MODULES): Ditto.
        (DO_X): Ditto.
        * configure: Add DLLTOOL.

Fri Jan 19 13:30:15 1996  Stan Shebs  <[email protected]>

        SCO OpenServer 5 changes from Robert Lipe <[email protected]>:
        * configure.in (i[345]86-*-sco3.2v5*): Use mh-sysv instead of
        mh-sco, since old workarounds no longer needed, and don't
        build ld, since libraries have weak symbols in COFF.

Sun Jan 14 23:01:31 1996  Fred Fish  <[email protected]>

        * Makefile.in (CONFIGURE_TARGET_MODULES): Add missing ';'.

Fri Jan 12 15:25:35 1996  Ian Lance Taylor  <[email protected]>

        * configure.in: Make sure that ${CC} can be used to compile an
        executable.

start-sanitize-gdbtk
Sat Jan  6 07:23:33 1996  Michael Meissner  <[email protected]>

        * Makefile.in (all-gdb): Depend on $(GDB_TK).
        * configure (GDB_TK): Set GDB_TK to either "all-tcl all-tk" or
        nothing depending on whether gdbtk is being built.

end-sanitize-gdbtk
Wed Jan  3 17:54:41 1996  Doug Evans  <[email protected]>

        * Makefile.in (newlib.tar.gz): Delete building of newlib's info files.

Mon Jan  1 19:09:14 1996  Brendan Kehoe  <[email protected]>

        * configure.in (noconfigdirs): Put ld or gas in this early, if the
        user specifically used --with-gnu-ld=no or --with-gnu-as=no.

Sat Dec 30 16:08:57 1995  Doug Evans  <[email protected]>

        * config-ml.in: Add support for
        --disable-{softfloat,m68881,m68000,m68020} on m68*-*-*.
        Simplify setting of multidirs from --disable-foo.

Fri Dec 29 07:56:11 1995  Michael Meissner  <[email protected]>

        * Makefile.in (EXTRA_GCC_FLAGS): If any of the make variables
        LANGUAGES, BOOT_CFLAGS, STMP_FIXPROTO, LIMITS_H_TEST,
        LIBGCC1_TEST, LIBGCC2_CFLAGS, LIBGCC2_INCLUDES, and ENQUIRE are
        non-empty, pass them on to the  GCC make.
        (all-bootstrap): New rule that is like all-gcc, except it executes
        the GCC bootstrap rule instead of the GCC all rule.

Wed Dec 27 15:51:48 1995  Doug Evans  <[email protected]>

        * config-ml.in (ml_realsrcdir): New, to account for ${subdir}.

Tue Dec 26 11:45:31 1995  Michael Meissner  <[email protected]>

        * config.guess (AViiON:dgux:*:*): Update from FSF to add pentium
        DG/UX support.

Fri Dec 15 10:01:27 1995  Stan Cox  <[email protected]>

        * config.sub (i*86*) Change [345] to [3456]

Wed Dec 20 17:41:40 1995  Brendan Kehoe  <[email protected]>

        * configure.in (noconfigdirs): Add gas or ld if --with-gnu-as=no or
        --with-gnu-ld=no.

Wed Dec 20 15:15:35 1995  Michael Meissner  <[email protected]>

        * config-ml.in (rs6000*, powerpc*): Add switches to control which
        AIX multilibs get built.

Mon Dec 18 17:55:46 1995  Jason Molenda  ([email protected])

        * configure.in (i386-win32): Don't build expect if we're not
        building the tcl subdir.

Mon Dec 18 11:47:19 1995  Stan Shebs  <[email protected]>

        * Makefile.in: (configure-target-examples, all-target-examples):
        New targets, configure and build example programs.

Fri Dec 15 16:13:03 1995  Stan Shebs  <[email protected]>

        * mpw-configure: If an mpw-config.in generated a file mk.sed,
        use it as input to sedit the generated MPW makefile.
        * mpw-README: Add a suggestion about Gestalt.h.

Wed Dec 13 16:43:51 1995  Ian Lance Taylor  <[email protected]>

        * config.sub: Accept *-*-ieee*.

Tue Dec 12 11:52:57 1995  Ian Lance Taylor  <[email protected]>

        * Makefile.in (local-distclean): Remove $(TARGET_SUBDIR).  From
        Ronald F. Guilmette <[email protected]>.

Mon Dec 11 15:31:58 1995  Jason Molenda  ([email protected])

        * configure.in (host==powerpc-pe): Add many directories to noconfigdirs
        for powerpc-pe native.
        (target==i386-win32): add tcl, make to noconfigdirs if canadian cross.
        (target==powerpc-pe): duplicate i386-win32 entry.

Sat Dec  9 14:58:28 1995  Jim Wilson  <[email protected]>

        * configure.in (noconfigdirs): Exclude target-newlib for all versions
        of vxworks, not just vxworks5.1.

Mon Dec  4 12:05:40 1995  Stan Shebs  <[email protected]>

        * mpw-configure: Add support for exec-prefix.

Mon Dec  4 10:22:50 1995  Jeffrey A. Law  <[email protected]>

        * config.guess: Recognize HP model 816 machines as having
        a PA1.1 processor.

Mon Dec  4 12:38:15 1995  Ian Lance Taylor  <[email protected]>

        * configure: Ignore new autoconf configure options.

Thu Nov 30 14:45:25 1995  J.T. Conklin  <[email protected]>

        * config/mt-v810 (CC_FOR_TARGET): Add -ansi flag.  NEC compiler
        defaults to K&R mode, but doesn't have varargs.h, so we have to 
        compile in ANSI mode.

Thu Nov 30 16:57:33 1995  Per Bothner  <[email protected]>

        * config.guess:  Recognize Pentium under SCO.
        From Robert Lipe <[email protected]>.

Wed Nov 29 13:49:08 1995  J.T. Conklin  <[email protected]>

        * configure.in (noconfigdirs): Disable target-libio on v810-*-*.
        * config/mt-v810 (CC_FOR_TARGET, AS_FOR_TARGET, AR_FOR_TARGET,
        RANLIB_FOR_TARGET): Set as appropriate for NEC v810 toolchain.

Wed Nov 29 12:12:01 1995  Ian Lance Taylor  <[email protected]>

        * configure.in: Don't configure gas for alpha-dec-osf*.

Tue Nov 28 17:16:48 1995  Ian Lance Taylor  <[email protected]>

        * configure.in: Default to --with-stabs for some targets for which
        it makes sense: mips*-*-*, alpha*-*-osf*, i[345]86*-*-sysv4* and
        i[345]86*-*-unixware*.

Mon Nov 27 13:44:15 1995  Ian Lance Taylor  <[email protected]>

        * config-ml.in: Get list of multidirs using gcc --print-multi-lib
        rather than basing it on the target.  Simplify handling of options
        controlling which directories to configure.  Remove extraneous
        slash in multi-clean target.

Fri Nov 24 17:29:29 1995  Doug Evans  <[email protected]>

        * config-ml.in: Prefix more variables with ml_ so they don't collide
        with configure's.

Wed Nov 22 11:27:02 1995  Ian Lance Taylor  <[email protected]>

        * configure: Don't turn -v into --v.

Tue Nov 21 16:48:02 1995  Doug Evans  <[email protected]>

        * configure.in (targargs): Fix typo.

        * Makefile.in (DEVO_SUPPORT): Add symlink-tree.

Tue Nov 21 14:08:28 1995  Ian Lance Taylor  <[email protected]>

        * configure.in: Strip --host and --target options from
        CONFIG_ARGUMENTS, and always configure for --host only.  Add
        --with-cross-host option when building with a cross-compiler.
        * configure: Canonicalize the arguments put into config.status by
        always using `=' for an option with an argument.  Pass a presumed
        --host or --target explicitly.

Fri Nov 17 17:50:30 1995  Stan Shebs  <[email protected]>

        * config.sub: Merge -macos*, -magic*, -pe*, and -win32 cases
        into general OS recognition case.

Fri Nov 17 17:42:25 1995  Jason Molenda  ([email protected])

        * configure.in (target_configdirs): add target-winsup only
        for win32 target systems.

Thu Nov 16 14:04:47 1995  Ian Lance Taylor  <[email protected]>

        * Makefile.in (all-target-libgloss): Depend upon
        configure-target-newlib, since when libgloss is built it looks to
        see if the newlib directory exists.

Wed Nov 15 14:47:52 1995  Ken Raeburn  <[email protected]>

        * Makefile.in (DEVO_SUPPORT): Use config-ml.in instead of
        cfg-ml-*.in.

Wed Nov 15 11:45:23 1995  Ian Lance Taylor  <[email protected]>

        * configure: Handle LD and LD_FOR_TARGET when configuring a
        Canadian Cross.

Tue Nov 14 15:03:12 1995  Jason Molenda  ([email protected])

        * config/mh-i386win32: add LD_FOR_TARGET.

Tue Nov 14 14:56:11 1995  Jason Molenda  ([email protected])

        * configure.in (target_libs): add target-winsup.
        (target==i386-win32): add patch diff flex make to $noconfigdirs.
        (target==ppcle-pe): remove ld from $noconfigdirs.

Tue Nov 14 01:25:50 1995  Doug Evans  <[email protected]>

        * Makefile.in (CONFIGURE_TARGET_MODULES): Pass --with-target-subdir.
        Preserve relative path names in $srcdir.  Build symlink tree if
        configuring cross target dir and srcdir=. (= no VPATH support).
        (configure-target-libg++): Depend on configure-target-librx.
        * cfg-ml-com.in, cfg-ml-pos.in: Deleted.
        * config-ml.in: New file.
        * symlink-tree: New file.
        * configure: Ensure srcdir="." if that's what it is.

Mon Nov 13 12:34:20 1995  Stan Shebs  <[email protected]>

        * mpw-README: Clarify some phrasing, add notes about CodeWarrior
        includes and FLEX_SKELETON setting.
        * mpw-configure (--with-gnu-ld): New option, controls whether
        to use PPCLink or ld with PowerMac GCC.
        * mpw-build.in (all-grez, do-grez, install-grez): New targets.
        * mpw-config.in: Configure grez if targeting Mac.

        * config.sub: Accept pmac and pmac-mpw as names for PowerMacs,
        accept mpw and mac-mpw as names for m68k Macs, change macos7 to
        just macos.
        * configure.in: Configure grez resource compiler if targeting Mac.
        * Makefile.in (all-grez, install-grez): New targets.

Wed Nov  8 17:33:51 1995  Jason Merrill  <[email protected]>

        * configure: CXX defaults to gcc, not g++.  If we find
        gcc in the path, set CC to gcc -O2.

Tue Nov  7 15:45:17 1995  Ian Lance Taylor  <[email protected]>

        * configure: Default ${build} correctly.  Avoid picking up extra
        spaces when reading CC and CXX from Makefile.  When doing a
        Canadian Cross, use plausible default values for numerous
        variables.
        * configure.in: When doing a Canadian Cross, don't try to
        configure tools whose configure script can't handle it.

Mon Nov  6 19:32:17 1995  Jim Wilson  <[email protected]>

        * cfg-ml-com.in (sh-*-*): Add m2 and ml/m2 to multidirs.

Sun Nov  5 00:15:41 1995  Per Bothner  <[email protected]>

        * configure:  Remove dubious bug reporting address.

Fri Nov  3 08:17:54 1995  Per Bothner  <[email protected]>

        * Makefile.in ($(CONFIGURE_TARGET_MODULES)):  If subdir has
        configure script, run that instead of this directory's configure.
        In either case, print a message that we're configuring the sub-dir.

Thu Nov  2 23:23:36 1995  Per Bothner  <[email protected]>

        * configure.in: Before checking for the existence of various files,
        use sed to filter out "target-".

Thu Nov  2 13:24:56 1995  Ian Lance Taylor  <[email protected]>

        * Makefile.in (DO_X): Split rule to decrease command line length
        for systems with small ARG_MAX values.  From [email protected]
        (Philippe De Muyter).

Wed Nov  1 15:18:35 1995  Jason Molenda  ([email protected])

        * Makefile.in (all-patch): depend on all-libiberty.

Wed Nov  1 12:23:20 1995  Ian Lance Taylor  <[email protected]>

        * configure.in: If the only directory in target_configdirs which
        actually exists is libiberty, then set target_configdirs to empty,
        to avoid trying to build a target libiberty in a gas or gdb
        distribution.

Tue Oct 31 17:52:39 1995  J.T. Conklin  <[email protected]>

        * configure.in (host_makefile_frag): Use m68k-sun-sunos* instead
        of m68k-sun-* when selecting mh-sun3 to avoid matching NetBSD/sun3
        systems.

Tue Oct 31 16:57:32 1995  Jim Wilson  <[email protected]>

        * configure.in (copy_dirs): Use sys-include instead of include
        for --with-headers option.

Tue Oct 31 10:29:36 1995  steve chamberlain  <[email protected]>

        * Makefile.in, configure.in: Make winsup builds work with
        new scheme.

Mon Oct 30 18:57:09 1995  Ian Lance Taylor  <[email protected]>

        * configure.in: Build the linker on AIX.

Mon Oct 30 12:27:16 1995  Per Bothner  <[email protected]>

        * Makefile.in (CC_FOR_TARGET, CXX_FOR_TARGET):  Add $(TARGET_SUBDIR)
        where needed.

Mon Oct 30 12:45:25 1995  Doug Evans  <[email protected]>

        * Makefile.in (all-gcc): Fix typo.

Sat Oct 28 10:27:59 1995  Per Bothner  <[email protected]>

        * Makefile.in ($(CHECK_TARGET_MODULES)):  Fix typo.

Fri Oct 27 23:14:12 1995  Per Bothner  <[email protected]>

        * configure.in:  Rename libFOO to target-libFOO, and xiberty
        to target-xiberty, to provide more flexibility.
        (target_subdir):  Define.  Create if cross.
        Set TARGET_SUBDIR in Makefile to ${target_subdir}.
        * Makefile.in:  Rename all-libFOO -> all-target-libFOO, all-xiberty
        -> all-target-libiberty, configure-libFOO -> configure-target-libFOO,
        check-libFOO -> check-target-libFOO, etc.
        ($(DO_X)):  Iterate over TARGET_CONFIGDIRS after SUBDIRS.
        ($(CONFIGURE_TARGET_MODULES), $(CHECK_TARGET_MODULES),
        $(ALL_TARGET_MODULES), $(INSTALL_TARGET_MODULES)): Update accordingly.
        (configure-target-XXX):  Depend on $(ALL_GCC), not all-gcc, to
        allow ALL_GCC="" to only configure.
        (DEVO_SUPPORT):  Add cfg-ml-com.in and cfg-ml-pos.in.
        (ETC_SUPPORT, ETC_SUPPORT_PFX):  Merge;  update 'taz' accordingly.
        (LIBGXX_SUPPORT_DIRS):  Remove xiberty.

Sat Oct 28 01:53:49 1995  Ken Raeburn  <[email protected]>

        * Makefile.in (taz): Build "info" in etc explicitly.

Fri Oct 27 09:32:30 1995  Stu Grossman  ([email protected])

        * configure.in:  Make sure that CC is undefined (as opposed to
        null) if toplevel/config/mh-{host} doesn't define it.  Fixes a
        problem with autoconf trying to configure on a host without GCC.

Thu Oct 26 22:35:01 1995  Stan Shebs  <[email protected]>

        * mpw-configure: Set host alias from choice of host compiler,
        only use generic MPW Makefile sed if present, edit a file
        named "hacked_Makefile.in" instead of "Makefile.in" if present.
        * mpw-README: Add problem notes about CW6 and CW7.

Thu Oct 26 05:45:10 1995  Ken Raeburn  <[email protected]>

        * Makefile.in (taz): Use ";" instead of ";;".

Wed Oct 25 15:18:24 1995  Per Bothner  <[email protected]>

        * Makefile.in (taz):  Grep for '^diststuff:' or '^info:' in
        sub-directory Makefiles, instead of using DISTSTUFFDIRS and
        DISTDOCDIRS.
        (DISTSTUFFDIRS, DISTDOCDIRS):  Removed - no longer used.
        (newlib.tar.gz):  Don't pass DISTDOCDIRS to recursive make.

Wed Oct 25 14:43:55 1995  Per Bothner  <[email protected]>

        * Makefile.in (DISTDOCDIRS):  Remove ld gprof bnutils gas libg++ gdb
        and gnats, because they are now subsumed by DISTSTUFFDIRS.
        Move bfd to DISTSTUFFDIRS.

Tue Oct 24 18:19:09 1995  Jason Molenda  ([email protected])

        * Makefile.in (X11_LIB): Removed.
        (X11_FLAGS_TO_PASS): pass only X11_EXTRA_CFLAGS and X11_EXTRA_LIBS.

        * configure.in (host_makefile_frag): mh-aix & mh-sun removed.

Sun Oct 22 13:04:42 1995  Michael Meissner  <[email protected]>

        * cfg-ml-com.in (powerpc*): Shorten some of the multilib directory
        names.

Fri Oct 20 18:02:10 1995  Michael Meissner  <[email protected]>

        * cfg-ml-com.in (powerpc*-eabi*): Add mcall-aixdesc varients.

Thu Oct 19 10:40:57 1995  steve chamberlain  <[email protected]>

        * configure.in (i[345]86-*-win32): Always build newlib.
        Don't configure cvs, autoconf or texinfo.
        * Makefile.in (LD_FOR_TARGET): New.
        (BASE_FLAGS_TO_PASS, EXTRA_TARGET_FLAGS, CONFIGURE_TARGET_MODULES):
        Pass down LD_FOR_TARGET.

Wed Oct 18 15:53:56 1995  steve chamberlain  <[email protected]>

        * winsup: New directory.
        * Makefile.in: Build winsup.
        * configure.in: Winsup is configured when target is win32.
        Can only build win32 target GDB when native.
        
Mon Oct 16 09:42:31 1995  Jeffrey A Law  ([email protected])

        * config.guess: Recognize HP model 819 machines as having
        a PA 1.1 processor.

Mon Oct 16 10:49:43 1995  Ian Lance Taylor  <[email protected]>

        * configure: Fix sed loop which substitutes for CC and CXX to
        avoid bug found in various sed implementations.

Wed Oct 11 16:16:20 1995  Michael Meissner  <[email protected]>

        * cfg-ml-com.in (powerpc-*-eabisim): Delete separate rule for
        simulator.  Use standard powerpc-*-eabi*.

Mon Oct  9 17:21:56 1995  Ian Lance Taylor  <[email protected]>

        * configure.in: Stop putting gas and binutils in noconfigdirs for
        powerpc-*-aix* and rs6000-*-*.

Mon Oct  9 12:38:40 1995  Michael Meissner  <[email protected]>

        * cfg-ml-com.in (powerpc*-*-eabisim*): Add support for building
        -mcall-aixdesc libraries.

Fri Oct  6 16:17:57 1995  Ken Raeburn  <[email protected]>

        Mon Sep 25 22:49:32 1995  Andreas Schwab  <[email protected]>

        * config.sub (arm | armel | armeb): Fix shell syntax.

Fri Oct  6 14:40:28 1995  Michael Meissner  <[email protected]>

        * cfg-ml-com.in ({powerpc,rs6000}-ibm-aix*): Add multilibs for
        -msoft-float and -mcpu=common support.
        (powerpc*-*-eabisim*): Add support for building -mcall-aix
        libraries.

Thu Oct  5 13:26:37 1995  Brendan Kehoe  <[email protected]>

        * configure.in: Allow configuration and build of emacs19 for the alpha.

Wed Oct  4 22:05:36 1995  Jason Molenda  ([email protected])

        * configure.in (CC): Get ^CC, not just any old CC, from
        ${host_makefile_frag}.

Wed Oct  4 21:55:00 1995  Jason Molenda  ([email protected])

        * configure.in (CC): Try to get CC from 
        ${srcdir}/${host_makefile_frag}, not ${host_makefile_frag}.

Wed Oct  4 21:44:12 1995  Jason Molenda  ([email protected])

        * Makefile.in (TARGET_CONFIGDIRS): configure targetdirs
        only if it exists in $(srcdir).

Wed Oct  4 11:52:31 1995  Ian Lance Taylor  <[email protected]>

        * configure: If CC and CXX are not set in the environment, set
        them, based on either an existing Makefile or on searching for gcc
        in PATH.  Substitute for CC and CXX in Makefile.
        * configure.in: Remove libm from target_libs.  Separate
        target_configdirs from configdirs.  If CC is not set in
        environment, try to get it from a host Makefile fragment.  Rewrite
        changes of configdirs to use skipdirs instead.  A few minor
        tweaks.  Take directories out of target_configdirs as they are
        taken out of configdirs.  Remove existing Makefile files from
        subdirectories.  Substitute for TARGET_CONFIGDIRS and
        CONFIG_ARGUMENTS in Makefile.
        * Makefile.in (TARGET_CONFIGDIRS): New variable, automatically set
        by configure.in.
        (CONFIG_ARGUMENTS): Likewise.
        (CONFIGURE_TARGET_MODULES): New variable.
        ($(DO_X)): Loop over TARGET_CONFIGDIRS as well as SUBDIRS.
        ($(CONFIGURE_TARGET_MODULES)): New target.
        (configure-libg++, configure-libio): New targets.
        (all-libg++): Depend upon configure-libg++.
        (all-libio): Depend upon configure-libio.
        (configure-libgloss, all-libgloss): New targets.
        (configure-libstdc++): New target.
        (all-libstdc++): Depend upon configure-libstdc++.
        (configure-librx, all-librx): New targets.
        (configure-newlib): New target.
        (all-newlib): Depend upon configure-newlib
        (configure-xiberty): New target.
        (all-xiberty): Depend upon configure-xiberty.

Sat Sep 30 04:32:59 1995  Jason Molenda ([email protected])

        * configure.in (host i[345]86-*-win32):  Expand the
        noconfigdirs again.

Thu Sep 28 21:18:49 1995  Stan Shebs  <[email protected]>

        * mpw-configure: Fix sed command file name.

Thu Sep 28 17:39:56 1995  steve chamberlain  <[email protected]>

        * configure.in (host i[345]86-*-win32): Reduce the 
        noconfigdirs again.

Wed Sep 27 12:24:00 1995  Ian Lance Taylor  <[email protected]>

        * configure.in: Don't configure ld and gdb for powerpc*-*-winnt*
        or powerpc*-*-pe*, since they are not yet supported.

Tue Sep 26 14:30:01 1995  Stan Shebs  <[email protected]>

        Add PowerMac support and many other enhancements.
        * mpw-configure: New option --cc to select compiler to use,
        paste options set according to --cc into the generated
        Makefile, generate the Makefile by sed'ing the Unix Makefile.in
        if mpw-make.sed is present.
        * mpw-config.in: Don't test for gC1, test for mpw-touch,
        add forward includes for PowerPC include files.
        * mpw-build.in: Build using Makefile.PPC if present.
        (do-byacc, etc): Remove separate version resource builds.
        (do-gas): Build "stamps" before "all".
        (do-gcc): Build "stamps-h" and "stamps-c" before "all".
        * mpw-README: Update to reflect --cc option, PowerMac support,
        and recently-reported compatibility problems.

Fri Sep 22 12:15:42 1995  Doug Evans  <[email protected]>

        * cfg-ml-com.in (m68*-*-*): Only build multilibs for
        embedded m68k systems (-aout, -coff, -elf, -vxworks).
        (--with-multilib-top): Pass to recursive invocations.

Tue Sep 19 13:51:05 1995  J.T. Conklin  <[email protected]>

        * configure.in (noconfigdirs): Disable libg++ and libstdc++ on
        v810-*-*.

Mon Sep 18 23:08:26 1995  J.T. Conklin  <[email protected]>

        * configure.in (noconfigdirs): Disable bfd, binutils, gas, gcc,
        gdb, ld and opcodes on v810-*-*.

Sat Sep 16 18:31:08 PDT 1995  Angela Marie Thomas <[email protected]>
        
        * config/mh-ncrsvr43: Removed AR_FLAGS

Tue Sep 12 18:03:31 1995  Ian Lance Taylor  <[email protected]>

        * Makefile.in (DO_X): Change do-realclean to do-maintainer-clean.
        (local-maintainer-clean): New target.
        (maintainer-clean): New target.
        (realclean): Just depend upon maintainer-clean.

Fri Sep  8 17:11:14 1995  J.T. Conklin  <[email protected]>

        * configure.in (noconfigdirs): Disable gdb on m68k-*-netbsd*.

Fri Sep  8 16:46:29 1995  Ian Lance Taylor  <[email protected]>

        * configure.in: Build ld in mips*-*-bsd* case.

Thu Sep  7 20:03:41 1995  Ken Raeburn  <[email protected]>

        * config.sub: Accept -lites* OS.  From Ian Dall.

Fri Sep  1 08:06:58 1995  James G. Smith  <[email protected]>

        * config.sub: recognise mips64vr4300 and mips64vr4300el as valid
        targets.

Wed Aug 30 21:06:50 1995  Jason Molenda  ([email protected])

        * configure.in: treat i386-win32 canadian cross the same as
        i386-go32 canadian cross.

Thu Aug 24 14:53:20 1995  Michael Meissner  <[email protected]>

        * cfg-ml-com.in (powerpc*-*-eabisim): Add support for PowerPC
        running under the simulator to build a reduced set of libraries.
        (powerpc-*-eabiaix): Add fine grained multilib support added to
        other powerpc targets yesterday.

Wed Aug 23 09:41:56 1995  Michael Meissner  <[email protected]>

        * cfg-ml-com.in (powerpc*): Add support for -disable-biendian,
        -disable-softfloat, -disable-relocatable, -disable-aix, and
        -disable-sysv to control which multilib libraries get built.

Thu Aug 17 16:03:41 1995  Ken Raeburn  <[email protected]>

        * configure: Add Makefile.tem to list of files to remove in trap
        handler.

Mon Aug 14 19:27:56 1995  Per Bothner  <[email protected]>

        * config.guess (*Linux*):  Add missing "exit"s.
        Also, need specific check for alpha-unknown-linux (uses COFF).

Fri Aug 11 15:38:20 1995  Per Bothner  <[email protected]>

        * config.guess:  Merge with FSF:

        Wed Jun 28 17:57:27 1995  David Edelsohn  <[email protected]>
        * config.guess (AIX4): More robust release numbering discovery.

        Thu Jun 22 19:01:24 1995  Kenneth Stailey  ([email protected])
        * config.guess (i386-sequent-ptx): Properly get version number.

        Thu Jun 22 18:36:42 1995  Uwe Seimet  ([email protected])
        * config.guess (mips:*:4*:UMIPS): New case.

Mon Aug  7 09:21:35 1995  Doug Evans  <[email protected]>

        * configure.in (i386-go32 host): Fix typo (deja-gnu -> dejagnu).
        (i386-win32 host): Likewise.  Don't build readline.

start-sanitize-gdbtk
Sat Aug  5 09:51:49 1995  Fred Fish  <[email protected]>

        * Makefile.in (GDBTK_SUPPORT_DIRS):  Define and pass as part of
        SUPPORT_FILES to submakes.

end-sanitize-gdbtk
Fri Aug  4 13:04:36 1995  Fred Fish  <[email protected]>

        * Makefile.in (GDB_SUPPORT_DIRS): Add utils.
        (DEVO_SUPPORT): Add mpw-README, mpw-build.in, mpw-config.h and
        mpw-configure.

Wed Aug  2 16:32:40 1995  Ken Raeburn  <[email protected]>

        * configure.in (appdirs): Use =, not ==, in test expression when
        trying to build the text to print in the warning message for
        Solaris users.

Mon Jul 31 09:56:18 1995  steve chamberlain  <[email protected]>

        * cfg-ml-com.in (z8k-*-coff): Add 'std' multilib build.

Fri Jul 28 00:16:31 1995  Jeffrey A. Law  <[email protected]>

        * config.guess: Recognize lynx-2.3.

Thu Jul 27 15:47:59 1995  steve chamberlain  <[email protected]>

        * config.sub (z8ksim): Deleted
        (z8k-*-coff): New, this is the one true name of the target.

Thu Jul 27 14:33:33 1995  Doug Evans  <[email protected]>

        * cfg-ml-pos.in (dotdot): Work around SunOS sed bug.

Thu Jul 27 13:31:05 1995  Fred Fish  ([email protected])

        * config.guess (*:Linux:*:*): First try asking the linker what the
        default object file format is (elf, aout, or coff).  Then if this
        fails, try previous methods.

Thu Jul 27 11:28:17 1995  J.T. Conklin  <[email protected]>

        * configure.in: Don't build newlib for *-*-vxworks5.1.

Thu Jul 27 11:18:47 1995  Brendan Kehoe  <[email protected]>

        * configure.in: Don't build newlib for a29k-*-vxworks5.1.
        * test-build.mk: Add setting of --with-headers for a29k-vxworks5.1.

Tue Jul 25 21:25:39 1995  Doug Evans  <[email protected]>

        * cfg-ml-pos.in (MULTITOP): Trim excess trailing "/.".

Fri Jul 21 10:41:12 1995  Doug Evans  <[email protected]>

        * cfg-ml-com.in: New file.
        * cfg-ml-pos.in: New file.

Wed Jul 19 00:37:27 1995  Jeffrey A. Law  <[email protected]>

        * COPYING.NEWLIB: Add HP free copyright to list.

Tue Jul 18 10:58:51 1995  Michael Meissner  <[email protected]>

        * config.sub: Recognize -eabi* for the system, not just -eabi.

Mon Jul  3 13:44:51 1995  Steve Chamberlain  <[email protected]>

        * Makfile.in (DLLTOOL_FOR_TARGET): New name, pass it down.
        * config.sub, configure.in (win32): New target and host.

Wed Jun 28 23:57:08 1995  Steve Chamberlain  <[email protected]>

        * configure.in: Add i386-pe configuration.

Fri Jun 23 14:28:44 1995  Stan Shebs  <[email protected]>

        * mpw-build.in (install): Install GDB after LD.

Thu Jun 22 17:10:53 1995  Stan Shebs  <[email protected]>

        * mpw-config.in (elf/mips.h): Always forward-include, needed
        for GDB to build.

Wed Jun 21 15:17:30 1995  Rob Savoye  <[email protected]>

        * testsuite: New directory for customer acceptance and whole tool
        chain tests.

Wed Jun 21 16:50:29 1995  Ken Raeburn  <[email protected]>

        * configure: If per-host line isn't found, but AC_OUTPUT is found
        and a configure script exists, run it instead.

Thu Jun 15 21:09:24 1995  Per Bothner  <[email protected]>

        * config.guess:  Update from FSF, for alpha-dec-winnt3.5 and  Crays.

Tue Jun 13 21:43:27 1995  Rob Savoye  <[email protected]>

        * configure: Set build_{cpu,vendor,os,alias} to host values when
        --build isn't specified.

Mon Jun  5 18:26:36 1995  Jason Merrill  <[email protected]>

        * Makefile.in (PICFLAG, PICFLAG_FOR_TARGET): New macros.
        (FLAGS_TO_PASS): Pass them.
        (EXTRA_TARGET_FLAGS): Ditto.

        * config/m?-*pic: Define PICFLAG* instead of LIB*FLAGS*.

Wed May 31 22:27:42 1995  Jim Wilson  <[email protected]>

        * Makefile.in (all-libg++): Depend on all-libstdc++.

Thu May 25 22:40:59 1995  J.T. Conklin  <[email protected]>

        * configure.in (noconfigdirs): Enable all packages for
          i386-unknown-netbsd.

Sat May 20 13:22:31 1995  Angela Marie Thomas  <[email protected]>

        * configure.in (noconfigdirs): Don't configure tk for i386-go32
        hosted builds (DOS builds)

Thu May 18 18:08:49 1995  Ken Raeburn  <[email protected]>

        Changes for ARM based on patches from Richard Earnshaw:
        * config.sub: Handle armeb and armel.
        * configure.in: Omit arm linker only for riscix.

Thu May 11 17:23:26 1995  Per Bothner  <[email protected]>

        * config.guess:  Update from FSF.

Tue May  9 15:52:05 1995  Michael Meissner  <[email protected]>

        * config.sub: Recognize powerpcle as the little endian varient of
        the PowerPC.  Recgonize ppc as a PowerPC variant, and ppcle as a
        powerpcle variant.  Convert pentium into i586, not i486.  Add p5
        alias for i586.  Map new x86 variants p6, k5, nexgen into i586
        temporarily.

Tue May  2 16:29:41 1995  Jeff Law  ([email protected])

        * configure.in (hppa*-*-lites*): Treat like hppa*-*-*elf*.

Sun Apr 30 21:38:09 1995  Jeff Law  ([email protected])

        * config.sub: Accept -lites* as a basic system type.

Thu Apr 27 11:33:29 1995  Michael Meissner  ([email protected])

        * config.guess (*:Linux:*:*): Check for whether the pre-BFD linker is
        installed, and if so return linuxoldld as the system name.

Wed Apr 26 10:59:02 1995  Jeff Law  ([email protected])

        * config.guess: Add hppa1.1-hp-lites support.

Tue Apr 25 11:08:11 1995  Rob Savoye  <[email protected]>

        * configure.in: Don't build newlib for m68k-vxworks5.1.

Wed Apr 19 17:02:43 1995  Jim Wilson  <[email protected]>

        * configure.in (mips-sgi-irix6): Use mh-irix5.

Fri Apr 14 15:21:17 1995  Doug Evans  <[email protected]>

        * Makefile.in (all-gcc): Depend on all-ld (for libgcc1-test).

Wed Apr 12 16:06:01 1995  Jason Merrill  <[email protected]>

        * test-build.mk: Enable building of shared libraries on IRIX 5 and
        OSF/1.  Fix compiler flags.
        * build-all.mk: Support Linux and OSF/1 3.0.  Fix compiler flags.

Tue Apr 11 18:55:40 1995  Doug Evans  <[email protected]>

        * configure.in: Recognize --with-newlib.
        (sparc-*-sunos4*): Build sim, dejagnu, expect, tcl if cross target.

start-sanitize-gdbtk
Mon Apr 10 14:38:20 1995  Jason Molenda ([email protected])

        * Makefile.in: move {all,check,install}-gdb from *_MODULES 
        to *_X11_MODULES due to gdbtk needing X include files et al.

end-sanitize-gdbtk
Mon Apr 10 11:42:22 1995  Stan Shebs  <[email protected]>

        Merge in support for Mac MPW as a host.
        (Old change descriptions retained for informational value.)

        * mpw-config.in: Add generic include forwards for cpu-specific
        include files in aout and elf directories.

        * mpw-configure: Added copyright.
        * mpw-config.in: Check for presence of required build tools.
        (target_libs): Add newlib.
        (target_tools): Add examples.
        (Read Me): Generate as "Read Me for MPW" instead.
        * mpw-build.in: Base sub-builds on all-foo instead of do-foo.
        (all-byacc, do-byacc, all-flex, do-flex, do-newlib): New actions.
        (do-gas, do-gcc, do-gdb, do-ld): Build Version.r first.

        * mpw-configure: Remove subdir-specific makefile hackery,
        delete mk.tmp after using it.

        * mpw-build.in (all): Display start and end times.

        * mpw-configure (host_canonical): Set.
        (target_cpu): Always add to makefiles.
        (ARCHDEFS, EMUL): Add to makefile only if nonempty.
        (TM_FILE, XM_FILE, NM_FILE): No longer add to makefile.
        (mpw-mh-mpw): Look for in srcdir and srcroot.
        Use sed instead of mpw-edit-prefix to edit prefix definitions.

        * mpw-build.in: (install-only): New target.

        * mpw-configure (host_alias, target_alias): Rename from hostalias
        and targetalias, add into generated Makefile.
        (mk.tmp): If present, add into generated Makefile.
        * mpw-build.in (all-gas): Build config.h first before gas proper.

        * mpw-configure (config.status): Write only if changed.
        * mpw-config.in (readline): Configure it (not built, just used for
        definitions).

        * mpw-config.in (elf/mips.h): Add a forward include.

        * mpw-config.in: Forward-include most .h files in include into
        extra-include.
        (readline): Don't build.
        mpw-build.in (install): Install GDB.

        * mpw-configure (prefix, mpw_prefix): Handle it.
        * mpw-config.in (mmalloc, readline): Don't configure.
        * mpw-build.in (thisscript): Rename to ThisScript.
        Use mpw-build instead of BuildProgram everywhere.
        (mmalloc, readline): Don't build.
        * mpw-README: New file, basic documentation about the MPW port.

        * mpw-config.in: Use forward-include to create include files.

        * mpw-configure: Add more things to the top of each configured
        Makefile, including contents of config/mpw-mh-mpw.
        * mpw-config.in (extra-include): Create this directory and fill it
        with Posix-like include files when configuring.

        * config.sub (apple, mac, mpw): Add various aliases.

        * mpw-build.in: New file, top-level build script fragment for MPW.
        * mpw-configure: New file, configure script for MPW.
        * mpw-config.in: New file, config fragment for MPW.

Fri Apr  7 19:33:16 1995  Jim Kingdon  ([email protected])

        * configure.in (host_libs): Remove glob, since it is gone from the
        sources.

Fri Mar 31 11:36:17 1995  Jason Molenda  ([email protected])

        * Makefile.in: define empty GDB_NLM_DEPS var.

        * configure.in(target_makefile_frag): use config/mt-netware
        for netware targets.

Thu Mar 30 13:51:43 1995  Ian Lance Taylor  <[email protected]>

        * config.sub: Merge in recent FSF changes.  Remove linux special
        cases.

Tue Mar 28 14:47:34 1995  Jason Molenda ([email protected])

        build-all.mk,config/mh-solaris:  revert these two changes:

        Tue Mar 30 10:03:09 1993  Ian Lance Taylor  ([email protected])

                * build-all.mk: Use CC=cc -Xs on Solaris.

        Mon Mar 29 19:59:26 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

                * config/mh-solaris: SunPRO C needs -Xs to be able to get a
                working xmakefile for Emacs.

Tue Mar 21 10:43:32 1995  Jim Kingdon  ([email protected])

        * glob/*: Removed.  Schauer's 24 Feb 1994 readline change made us
        stop using it.
        * Makefile.in: Nuke all references to glob subdirectory.

Thu Mar 16 13:35:30 1995  Jason Merrill  <[email protected]>

        * configure.in: Fix --enable-shared logic in per-host.

Mon Mar 13 12:33:15 1995  Ian Lance Taylor  <[email protected]>

        * configure.in (*-hp-hpux[78]*): Use mh-hpux8.

Mon Mar  6 10:21:58 1995  Jim Kingdon  ([email protected])

        * configure.in (noconfigdirs): Don't build gas on AIX, for
        powerpc*-*-aix* as well as for rs6000*-*-aix*.

Wed Mar  1 12:51:53 1995  Ian Lance Taylor  <[email protected]>

        * configure: Fix --cache-file to work if the file argument is a
        relative path.

Tue Feb 28 17:36:07 1995  Ian Lance Taylor  <[email protected]>

        * configure: If the --cache-file is used, pass it down to
        configure in subdirectories.

Mon Feb 27 12:52:46 1995  Kung Hsu  <[email protected]>

        * config.sub: add vxworks29k configuration.

Fri Feb 10 16:12:26 1995  Ken Raeburn  <[email protected]>

        * Makefile.in (taz): Do "diststuff" part quietly.

Sun Feb  5 14:16:35 1995  Doug Evans  <[email protected]>

        * config.sub: Mini-merge with gcc/config.sub.

Sat Feb  4 12:11:35 1995  Jim Wilson  <[email protected]>

        * config.guess (IRIX): Sed - to _.

Fri Feb  3 11:54:42 1995  J.T. Conklin  <[email protected]>

        * Makefile.in (source-vault, binary-vault): New targets.

Thu Jan 26 13:00:11 1995  Michael Meissner  <[email protected]>

        * config.sub: Recognize -eabi as a basic system type.

Thu Jan 12 13:13:23 1995  Jason Merrill  <[email protected]>

        * configure.in (enable_shared stuff): Fix typo.

Thu Jan 12 01:36:51 1995  [email protected] (Dean Messing)

        * Makefile.in (BASE_FLAGS_TO_PASS): Fix typo in passing LIBCXXFLAGS*.

Wed Jan 11 16:29:53 1995  Jason Merrill  <[email protected]>

        * Makefile.in (LIBCXXFLAGS_FOR_TARGET): Add -fno-implicit-templates.

Mon Jan  9 12:48:01 1995  Jim Kingdon  <[email protected]>

        * configure.in (rs6000-*-*): Don't build gas.

Wed Jan  4 23:53:49 1995  Ian Lance Taylor  <[email protected]>

        * Makefile.in: Use /x/x/ instead of /brokensed/brokensed/, to
        reduce command line length.
        (AS_FOR_TARGET): Check for as.new, not Makefile.
        (NM_FOR_TARGET): Check for nm.new, not Makefile.

Wed Jan  4 13:02:39 1995  Per Bothner  <[email protected]>

        * config.guess:  Merge from FSF.

Thu Dec 15 17:11:37 1994  Ian Lance Taylor  <[email protected]>

        * configure: Don't use $ when handling program_suffix.

Mon Dec 12 12:09:37 1994  Stu Grossman  ([email protected])

        * configure.in:  Configure tk for hppa/hpux.

Fri Dec  2 15:55:38 1994  Per Bothner  <[email protected]>

        * Makefile.in (LIBGXX_SUPPORT_DIRS):  Add libstdc++.

Tue Nov 29 19:37:56 1994  Per Bothner  <[email protected]>

        * Makefile.in:  Move -fno-implicit-template from CXXFLAGS
        to LIBCXXFLAGS.  Tests are better run without it.

Wed Nov 23 10:29:25 1994  Brendan Kehoe  ([email protected])

        * Makefile.in (all-ispell): Depend on all-emacs19 instead of all-emacs.

Mon Nov 21 11:14:01 1994  J.T. Conklin  <[email protected]>

        * configure.in (*-*-netware*): Don't configure xiberty.

Mon Nov 14 08:49:15 1994  Stu Grossman  ([email protected])

        * configure.in:  Remove tk from native_only list.

Fri Nov 11 15:31:26 1994  Bill Cox  ([email protected])

        * build-all.mk: Add mips-ncd-elf target to sun4 targets
          for special NCD build.

Mon Nov  7 20:58:17 1994  Ken Raeburn  <[email protected]>

        * Makefile.in (DEVO_SUPPORT): Remove configure.bat and
        makeall.bat, they're only useful for binutils snapshots.
        (binutils.tar.gz, gas+binutils.tar.gz): Add configure.bat and
        makeall.bat to specified SUPPORT_FILES.

Mon Nov  7 17:25:18 1994  Bill Cox  ([email protected])

        * build-all.mk: Add Ericsson targets to sun4 and solaris
          hosts.  Add  BNR's sun4 target to solaris host, so their
          build-from-source will be tested in-house first.

Sat Nov  5 18:43:30 1994  Jason Merrill  ([email protected])

        * Makefile.in (LIBCFLAGS): New variable.
        (CFLAGS_FOR_TARGET): Ditto.
        (LIBCFLAGS_FOR_TARGET): Ditto.
        (LIBCXXFLAGS): Ditto.
        (CXXFLAGS_FOR_TARGET): Ditto.
        (LIBCXXFLAGS_FOR_TARGET): Ditto.
        (BASE_FLAGS_TO_PASS): Pass them.
        (EXTRA_TARGET_FLAGS): Ditto.

        * configure.in, config/m[th]-*pic: Support --enable-shared.

Sat Nov  5 15:44:00 1994  Per Bothner  <[email protected]>

        * configure.in (target_libs):  Include libstdc++ again.
        * config.guess:  Update from FSF (for FreeBSD).

Thu Nov  3 16:32:30 1994  Ken Raeburn  <[email protected]>

        * Makefile.in (DEVO_SUPPORT): Include configure.bat and
        makeall.bat.
        (DISTDOCDIRS): Add `etc'.
        (ETC_SUPPORT_PFX): New variable.
        (taz): Include anything from etc starting with a word in
        ETC_SUPPORT_PFX.

Wed Oct 26 16:19:35 1994  Ian Lance Taylor  <[email protected]>

        * config.sub: Update for recent FSF changes.  Remove obsolete
        h8300hds entry.  Add -windows* and -osx as basic os.  Minor
        spacing changes.

Thu Oct 20 18:41:56 1994  Per Bothner  <[email protected]>

        * configure.in (target_libs):  Remove libstdc++ for libg++-2.6.1.

        * config.guess:  Merge with FSF.
        * configure.in:  Match on i?86-ncr-sysv4.3, not i?86-ncr-sysv43.

Thu Oct 20 19:26:56 1994  Ken Raeburn  <[email protected]>

        * configure: Since the "trap 0" handler will override the exit
        status on many systems, only use it for "exit 1", and make it set
        a non-zero exit status; reset it before "exit 0".  Also, check
        exit status of config.sub, and error out if it failed.

Wed Oct 19 18:49:55 1994  Rob Savoye  ([email protected])

        * Makefile.in: (ALL_TARGET_MODULES,INSTALL_TARGET_MODULES) Build
        and install libgloss.

Tue Oct 18 15:25:24 1994  Ian Lance Taylor  <[email protected]>

        * Makefile.in (all-binutils): Depend upon all-byacc.

        * configure.in: Don't build emacs on Irix 5.

Mon Oct 17 16:22:12 1994  J.T. Conklin  ([email protected])

        * configure.in (*-*-netware*): Add libio.

Thu Oct 13 15:51:20 1994  Jason Merrill  ([email protected])

        * Makefile.in (ALL_TARGET_MODULES): Add libstdc++.
        (CHECK_TARGET_MODULES): Ditto.
        (INSTALL_TARGET_MODULES): Ditto.
        (TARGET_LIBS): Ditto.
        (all-libstdc++): Note dependencies.

Thu Oct 13 01:43:08 1994  Ken Raeburn  <[email protected]>

        * Makefile.in (BINUTILS_SUPPORT_DIRS): Add gas.

Tue Oct 11 12:12:29 1994  Jason Merrill  ([email protected])

        * Makefile.in (CXXFLAGS): Use -fno-implicit-templates instead of
        -fexternal-templates.

        * configure.in (target_libs): Add libstdc++.
        (noconfigdirs): Add libstdc++ as appropriate.

Thu Oct  6 18:00:54 1994  Per Bothner  ([email protected])

        * config.guess:  Update from FSF.

Tue Oct  4 12:05:42 1994  Ian Lance Taylor  <[email protected]>

        * configure: Use ${config_shell} when running ${configsub}.

Mon Oct  3 14:28:34 1994  Doug Evans  <[email protected]>

        * config.sub: No longer recognize h8300h.

Mon Oct  3 12:40:54 1994  Ian Lance Taylor  <[email protected]>

        * config.sub: Remove extraneous differences between config.sub and
        gcc/config.sub.

Sat Oct  1 00:23:12 1994  Ken Raeburn  <[email protected]>

        * Makefile.in (DISTSTUFFDIRS): Add gas.

Thu Sep 22 19:04:55 1994  Doug Evans  ([email protected])

        * COPYING.NEWLIB: New file.

Mon Sep 19 18:25:40 1994  Per Bothner  ([email protected])

        * config.guess (HP-UX):  Patch from Harlan Stenn
        <[email protected]> to also emit release level.

Wed Sep  7 13:15:25 1994  Jim Wilson  ([email protected])

        * config.guess (sun4*:SunOS:*:*): Change '-JL' to '_JL'.

Tue Sep  6 23:23:18 1994  Per Bothner  ([email protected])

        * config.sub:  Merge nextstep cleanup from FSF.

Mon Sep  5 05:01:30 1994  Ken Raeburn  ([email protected])

        * configure.in (arm-*-*): Don't configure ld for this target.

Thu Sep  1 09:35:00 1994  J.T. Conklin  ([email protected])

        * configure.in (*-*-netware): don't configure libg++, libio,
          librx, or newlib.

Wed Aug 31 13:52:08 1994  Ian Lance Taylor  ([email protected])

        * configure.in (alpha-dec-osf*): Use osf*, not osf1*.  Don't
        configure ld--it works, but it doesn't support shared libraries.

Sun Aug 28 18:13:45 1994  Per Bothner  ([email protected])

        * config.guess (*-unknown-freebsd*):  Get rid of possible
        trailing "(Release)" in version string.
        Patch from Paul Richards <[email protected]>.

Sat Aug 27 15:00:49 1994  Per Bothner  ([email protected])

        * config.guess:  Fix i486-ncr-sysv43 -> i486-ncr-sysv4.3.
        Fix type: *-next-neststep -> *-next-nextstep.

        * config.guess:  Merge from FSF:

        Fri Aug 26 18:45:25 1994  Philippe De Muyter ([email protected])

        * config.guess: Recognize powerpc-ibm-aix3.2.5.

        Wed Apr 20 06:36:32 1994  Philippe De Muyter  ([email protected])

        * config.guess: Recognize UnixWare 1.1 (UNAME_SYSTEM is SYSTEM_V
        instead of UNIX_SV for UnixWare 1.0).

Sat Aug 27 01:56:30 1994  Stu Grossman  ([email protected])

        * Makefile.in (all-gdb):  Add dependencies on all-gcc and all-ld
        to make gdb/nlm/* build after the compiler and linker.

Fri Aug 26 14:30:05 1994  Per Bothner  ([email protected])

        * config.guess (netbsd, freebsd, linux):  Accept any machine,
        not just i[34]86.
        (m68k-atari-sysv4):  Relocate to match FSF version.

        * config.guess:  More merges from the FSF:

        Add a space before function call or macro invocation.

        Tue May 10 16:53:55 1994  Roland McGrath ([email protected])

        * config.guess: Add trap cmd to remove dummy.c and dummy when
        interrupted.

        Wed Apr 20 18:07:13 1994  Roland McGrath ([email protected])

        * config.guess (dummy.c): Redirect stderr for `hostinfo' command.
        (dummy): Redirect stderr from compilation of dummy.c.

        Sat Apr  9 14:59:28 1994  Christian Kranz  ([email protected])

        * config.guess: Distinguish between NeXTStep 2.1 and 3.x.

Fri Aug 26 13:42:20 1994  Ken Raeburn  ([email protected])

        * configure: Accept and ignore --cache*, for compatibility with
        new autoconf.

Fri Aug 26 13:05:27 1994  Per Bothner  ([email protected])

        * config.guess:  Merge from FSF:

        Thu Aug 25 20:28:51 1994  Richard Stallman  <[email protected]>

        * config.guess (Pyramid*:OSx*:*:*): New case.
        (PATH): Add /.attbin at end for finding uname.
        (dummy.c): Handle i860-alliant-bsd.  Follow whitespace conventions.

        Wed Aug 17 18:21:02 1994  Tor Egge  ([email protected])

        * config.guess (M88*:DolphinOS:*:*): New case.

        Thu Aug 11 17:00:13 1994  Stan Cox  ([email protected])

        * config.guess (AViiON:dgux:*:*): Use TARGET_BINARY_INTERFACE
        to select whether to use ELF or COFF.

        Sun Jul 24 16:20:53 1994  Richard Stallman  <[email protected]>

        * config.guess: Recognize i860-stardent-sysv and i860-unknown-sysv.

        Sun May  1 10:23:10 1994  Richard Stallman  ([email protected])

        * config.guess: Guess the OS version for HPUX.

        Tue Mar  1 21:53:03 1994  Karl Heuer  ([email protected])

        * config.guess (UNAME_VERSION): Recognize aix3.2.4 and aix3.2.5.

Fri Aug 26 11:19:08 1994  Ian Lance Taylor  ([email protected])

        * configure.in: Recognize --with-headers, --with-libs, and
        --without-newlib.
        * Makefile.in (all-xiberty): Depend upon all-ld.

Wed Aug 24 12:36:50 1994  Ian Lance Taylor  ([email protected])

        * configure.in: Change i[34]86 to i[345]86.

Mon Aug 22 10:58:33 1994  Ian Lance Taylor  ([email protected])

        * configure (version): A few more tweaks to help message.

Fri Aug 19 12:40:25 1994  Per Bothner  ([email protected])

        * Makefile.in:  Remove (for now) librx as a host library,
        now that we're building it for target.

Fri Aug 19 10:49:17 1994  Ian Lance Taylor  ([email protected])

        * configure: Fix up help message; from [email protected]
        (Karl Berry).

Tue Aug 16 16:11:08 1994  Per Bothner  ([email protected])

        * configure.in:  Also configure librx.

Mon Aug 15 16:51:45 1994  Per Bothner  ([email protected])

        * Makefile.in:  Update various rules to reflect that librx
        is now needed for libg++.

Fri Aug 12 18:07:21 1994  Ian Lance Taylor  ([email protected])

        * config.sub: Accept mips64orion and mips64orionel as a CPU name.

Mon Aug  8 11:36:17 1994  Stan Shebs  ([email protected])

        * configure.in: Configure the examples directory.

Thu Aug  4 16:12:36 1994  Ian Lance Taylor  ([email protected])

        * configure: Simplify Jun 2 1994 change.

Wed Aug  3 04:58:16 1994  D. V. Henkel-Wallace  ([email protected])

        * change CC to /usr/latest/bin/gcc for lynx host builds, since
        /bin/gcc isn't good enough to build gcc.

Wed Jul 27 09:07:14 1994  Fred Fish  ([email protected])

        * Makefile.in (GDB_SUPPORT_FILES): Remove
        (setup-dirs-gdb, gdb.tar.gz, make-gdb.tar.gz):  Remove old rules.
        (gdb.tar.gz): Add new rule to use standard distribution building
        mechanism.

Mon Jul 25 11:10:06 1994  Ian Lance Taylor  ([email protected])

        * configure.in: Warn about use of /usr/ucb/cc on Solaris.  From
        Bill Cox <[email protected]>.

Sat Jul 23 12:19:46 1994  Per Bothner  ([email protected])

        * config.guess:  Recognize ISC.  Patch from [email protected].

Fri Jul 22 17:53:59 1994  Stu Grossman  ([email protected])

        * configure:  Search current dir first in .gdbinit.

Fri Jul 22 11:28:30 1994  Per Bothner  ([email protected])

        * config.sub:  Recognize freebsd (merged from gcc config.sub).

Thu Jul 21 14:10:52 1994  Per Bothner  ([email protected])

        * config.sub:  Refer to NeXT's operating system as nextstep.

        * config.sub (case $basic_machine):  Re-order the cases, to match
        the order in the FSF version (which is mostly alphabethical).
        Merge in some additions and changes from the FSF.

Sat Jul 16 12:03:08 1994  Stan Shebs  ([email protected])

        * config.guess: Recognize m68k-atari-sysv4 and m88k-harris-csux7.
        * config.sub: Recognize cxux7.
        * configure.in: Use mh-cxux for m88k-harris-cxux*.

Mon Jul 11 14:37:39 1994  Per Bothner  ([email protected])

        * config.sub:  Fix typo powerpc -> powerpc-*.

Sat Jul  9 13:03:43 1994  Michael Tiemann  ([email protected])

        * Makefile.in: `all-emacs19' depends on `all-byacc'.

        * Makefile.in: Add all-emacs19 and install-emacs19 rules (in
        parallel with all-emacs and install-emacs).  Top-level command
        `make all-emacs19 CC=gcc' now behaves as `make all-emacs CC=gcc'.

Thu Jun 30 16:53:42 1994  Ian Lance Taylor  ([email protected])

        * test-build.mk ($(host)-stamp-stage2-installed): Remove
        $(relbindir)/make before doing ``make install'', and use
        $(GNU_MAKE) while doing it.  Avoids problem on SunOS with
        installing over running make binary.
        ($(host)-stamp-stage3-installed): Likewise.

Tue Jun 28 13:43:25 1994  Jim Kingdon  ([email protected])

        * config.guess: Recognize Mach.

Mon Jun 27 16:41:14 1994  Ian Lance Taylor  ([email protected])

        * configure: Check ${exec_prefixoption}, not ${exec_prefix}, to
        see whether --exec-prefix was used.

Sun Jun 26 21:15:54 1994  Per Bothner  ([email protected])

        * README:  Explicitly mention libg++/README.  (Zoo's idea.)

Tue Jun 21 12:45:55 1994  Jim Kingdon  ([email protected])

        * Makefile.in: Add all-librx target similar to all-libproc.

Wed Jun  8 23:11:55 1994  Stu Grossman  ([email protected])

        * config.guess:  Rearrange tests for Alpha-OSF1 to properly deal
        with post 1.2 uname bogosity.

Thu Jun  9 00:27:59 1994  Ian Lance Taylor  ([email protected])

        * configure: Remove temporary files on receipt of a signal.

Tue Jun  7 12:06:24 1994  Ian Lance Taylor  ([email protected])

        * configure: If there is a package_makefile_frag, remove
        ${subdir}/Makefile.tem after copying it in.

Mon Jun  6 21:35:02 1994  D. V. Henkel-Wallace  ([email protected])

        * build_all.mk: support rs6000 lynx identifies itself as
        rs6000-lynx-lynxos2.2.2.  Also, use /usr/cygnus/progressive/bin/gcc
        since /bin/gcc is too feeble to compile a modern gcc.

Mon Jun  6 16:06:34 1994  Karen Christiansen ([email protected])

        * brought devo/test-build.mk update-to-date with progressive/
          test-build.mk. Add lynx targets and hppa flag info.

Sat Jun  4 17:23:54 1994  Per Bothner  ([email protected])

        * configure.in:  Use mh-ncrsvr43.  Patch from
        Tom McConnell <[email protected]>.

Fri Jun  3 17:47:24 1994  Per Bothner  ([email protected])

        * config.guess (i386-unknown-bsdi):  No longer need to
        check #if defined(__bsdi__) && defined(__i386__).

Thu Jun  2 18:56:46 1994  Ian Lance Taylor  ([email protected])

        * configure: Set program_transform_nameoption correctly.

Thu Jun  2 10:57:06 1994  Karen Christiansen ([email protected])

        * brought build-all.mk update-to-date with progressive build-all.mk,
          added new targets and hppa info.
        
Thu Jun  2 00:12:44 1994  Ian Lance Taylor  ([email protected])

        * configure: If config.guess result is a prefix of the user
        specified target, assume a native build and use the user specified
        target as the host alias.  Remove SunOS patch suffix removal hack.
        * configure.in: Remove SunOS patch suffix removal hack.

        * Makefile.in (CROSS_CHECK_MODULES): Remove check-flex, since it's
        in NATIVE_CHECK_MODULES.

Wed Jun  1 10:49:41 1994  Bill Cox  ([email protected])

        * Makefile.in: Rename HOST_ONLY to NATIVE.
        * configure: Delete SunOs patch suffix from host_canonical
          and build_canonical variables that are prepended to Makefiles.
        * configure.in: Add comments for easier maintenance.

Tue May 31 19:39:47 1994  Jim Kingdon  ([email protected])

        * Makefile.in: Add all-libproc target similar to all-gui.

Tue May 31 17:16:33 1994  Tom Lord  ([email protected])

        * Makefile.in (CHECK_MODULES): split into
        HOST_ONLY_CHECK_MODULES and CROSS_CHECK_MODULES.

Tue May 31 16:36:36 1994  Paul Eggert  ([email protected])

        * config.guess (i386-unknown-bsdi): New system to guess.

Wed May 25 16:47:10 1994  Jim Kingdon  ([email protected])

        * Makefile.in: Add all-gui target (but not yet build by "all").

Thu May 26 08:53:19 1994  Bill Cox  ([email protected])

        * config.sub: Move deletion of patch suffix from here...
        * configure.in: To here, at Ian's suggestion.  The top-
          level scripts might need to know of a patch level.

Wed May 25 09:15:54 1994  Bill Cox  ([email protected])

        * config.sub: Strip off patch suffix so rtl is recognized
          as a sunos4.1.3 machine, even though it's been patched.

Fri May 20 08:25:49 1994  Steve Chamberlain  ([email protected])

        * Makefile.in (INSTALL_LAST): Delete.
        (INSTALL_DOSREL): New.

Thu May 19 17:12:12 1994  Ian Lance Taylor  ([email protected])

        * configure.in: Use ld for i[34]86-*-sysv4* and sparc-*-solaris2*.
        Don't set use_gnu_ld to no for *-*-sysv4; that only controls
        whether we pass down --with-gnu-ld anyhow.

Thu May 19 09:29:12 1994  Steve Chamberlain  ([email protected])

        * Makefile.in (INSTALL_LAST): Change operation so it works
        on more flavors of make.
        * configure.in (go32): Don't build libg++ or libio.

Fri May 13 13:28:34 1994  Steve Chamberlain  ([email protected])

        * Makefile.in (Move HOST_PREFIX_1 and friends up so
        they can be overriden by templates.

Sat May  7 16:46:44 1994  Steve Chamberlain  ([email protected])

        * configure.in (target==go32): Don't build gdb.
        * dosrel: New directory.

Fri May  6 14:19:25 1994  Steve Chamberlain  ([email protected])

        * configure.in (host==go32): Configure dosrel too.
        * Makefile.in (INTALL_TARGET): Call INSTALL_LAST last.
        (HOST_CC, HOST_PREFIX, HOST_PREFIX_1): Undefine, they should
        be set by incoming names or templates.
        (INSTALL_LAST): New rule.
        * config/mh-go32: New fragment.

Thu May  5 17:35:05 1994  Stan Shebs  ([email protected])

        * config.sub (sparclitefrw, sparclitefrwcompat): Don't set the os.

Thu May  5 20:06:45 1994  Ken Raeburn  ([email protected])

        * config/mh-lynxrs6k: Renamed from mh-lynxosrs6k, to make it
        unique in 8.3 naming schemes.
        * configure.in (appdirs): New variable.  Currently empty, but will
        be used in gas distribution.  If nonempty, lists a set of
        directories at least one of which must get configured, or top
        level configuration is considered to have failed.
        (rs6000-*-lynxos*): Use new file name.

Thu May  5 13:38:36 1994  Ian Lance Taylor  ([email protected])

        Eliminate XTRAFLAGS.
        * Makefile.in (CC_FOR_TARGET): If newlib exists, refer to the
        newlib include files using -idirafter, and also use -nostdinc.
        (CXX_FOR_TARGET): Likewise.
        (XTRAFLAGS): Removed.
        (BASE_FLAGS_TO_PASS): Remove XTRAFLAGS_FOR_TARGET.
        (EXTRA_HOST_FLAGS): Remove XTRAFLAGS.
        (EXTRA_TARGET_FLAGS, EXTRA_GCC_FLAGS): Likewise.
        ($(DO_X)): Don't pass down XTRAFLAGS.

Thu May  5 00:16:36 1994  Ken Raeburn  ([email protected])

        * configure.in (mips*-dec-bsd*): New target; do build linker.
        (mips*-*-bsd*): New target; don't build linker.

Wed May  4 20:10:10 1994  D. V. Henkel-Wallace  ([email protected])

        * configure.in: support rs6000-*-lynxos* configuration.
        support sunos4 as a cross target.

        * config.sub: look for lynx*, not lynx since the OS version may
        legitimately be part of the name.

Tue May  3 21:48:11 1994  Ken Raeburn  ([email protected])

        * configure.in (i[34]86-*-sco*): Move to be with other i386
        targets.
        (romp-*-*): New target.  Skip various binary utilities.
        (vax-*-*): New target.  Don't build newlib.
        (vax-*-vms): Renamed from *-*-vms.  Don't build opcodes or newlib.

Thu Apr 28 15:03:05 1994  David J. Mackenzie  ([email protected])

        * configure.in: Only set host_makefile_frag if config
        directory exists.

Wed Apr 27 12:14:30 1994  David J. Mackenzie  ([email protected])

        * install.sh: If $dstdir exists, don't check whether each
        component does.

Tue Apr 26 18:11:33 1994  Ian Lance Taylor  ([email protected])

        * test-build.mk (HOLES): Add sleep; used by rcs/src/conf.sh.

Mon Apr 25 15:06:34 1994  Stan Shebs  ([email protected])

        * configure.in (*-*-lynxos*): Don't configure newlib for either
        native or cross Lynx.

Sat Apr 16 11:58:16 1994  Doug Evans  ([email protected])

        * config.sub (sparc64-elf): Fix os.
        (z8k): Remove duplicate.

Thu Apr 14 23:33:17 1994  Ian Lance Taylor  ([email protected])

        * Makefile.in (gcc-no-fixedincludes): Touch gcc/include/fixed, not
        gcc/stmp-fixproto, to try to prevent fixproto from being run.

Wed Apr 13 15:14:52 1994  Bill Cox  ([email protected])

        * configure: Make file links cleanly even if Lynx fails on
          an NFS symlink (at least fail cleanly).

Mon Apr 11 10:58:56 1994  Jim Wilson  ([email protected])

        * test-build.mk (CC): For mips-sgi-irix4, change -XNh1500 to
        -XNh2000.

Sat Apr  9 15:10:45 1994  David J. Mackenzie  ([email protected])

        * configure: Unknown options are fatal again.

Fri Apr  8 12:01:41 1994  David J. Mackenzie  ([email protected])

        * configure: Ignore --x-includes and --x-libraries, for Autoconf
        compatibility. 

Thu Apr  7 17:31:43 1994  Doug Evans  ([email protected])

        * build-all.mk: Add `clean' target.

Wed Apr  6 20:44:56 1994  Peter Schauer  ([email protected])

        * config.guess:  Add SINIX support.
        * configure.in:  Add mips-*-sysv4* support.

Mon Apr  4 17:41:44 1994  Doug Evans  ([email protected])

        * build-all.mk: Document all useful targets.
        If canonhost is sparc-sun-solaris2.3, change it to sparc-sun-solaris2.
        If canonhost is mips-sgi-irix4.0.5H, change it to mips-sgi-irix4.

Thu Mar 31 04:55:57 1994  David J. Mackenzie  ([email protected])

        * configure: Support --silent, --quiet.

Wed Mar 30 21:37:38 1994  David J. Mackenzie  ([email protected])

        * configure: Support --disable-FEATURE.

Tue Mar 29 19:15:05 1994  Jim Kingdon  ([email protected])

        * config.guess: Recognize NCR running SVR4.3.

Mon Mar 28 14:55:15 1994  Per Bothner  ([email protected])

        * config.guess:  Make BSDI generate i386-unknown-bsd386.
        Patch from Paul Eggert <[email protected]>.

Mon Mar 28 12:54:52 1994  Ian Lance Taylor  ([email protected])

        * configure.in (powerpc-*-aix*): Treat like rs6000-*-*.

Sat Mar 26 11:25:48 1994  David J. Mackenzie  ([email protected])

        * configure: Make unrecognized options give nonfatal warnings
        instead of fatal errors, and pass them to any subdirectory
        configures in case they recognize them.
        Make --x equivalent to --with-x.

Fri Mar 25 21:52:10 1994  David J. Mackenzie  ([email protected])

        * configure: Add --enable-* options.  Clean up usage message and
        some comments.

Thu Mar 24 09:12:53 1994  Doug Evans  ([email protected])

        * Makefile.in (NM_FOR_TARGET): Build tree version is now nm.new.

Sun Mar 20 11:28:22 1994  Jeffrey A. Law  ([email protected])

        * configure.in (hppa*-*-*): Enable binutils.

Sat Mar 19 11:50:16 1994  Jim Kingdon  ([email protected])

        * config.sub: Recognize cisco.

Fri Mar 18 16:42:32 1994  Jason Merrill  ([email protected])

        * Makefile.in (CXXFLAGS): Add -fexternal-templates.

Tue Mar 15 11:25:55 1994  Jim Kingdon  ([email protected])

        * config.guess: about target *-hitachi-hiuxwe2, don't print more
        than one configuration name.  Add comment.

Sun Mar  6 23:13:38 1994  Hisashi MINAMINO  ([email protected])

        * config.guess: about target *-hitachi-hiuxwe2, fixed
        machine guessing order.  [Hitachi's CPU_IS_HP_MC68K
        macro is incorrect.]

Sun Mar 13 09:10:08 1994  Jim Kingdon  ([email protected])

        * Makefile.in (TAGS): Just build TAGS in each subdirectory, rather
        than the "make ls" stuff which used to be here.

Fri Mar 11 12:52:39 1994  Per Bothner  ([email protected])

        * config.guess:  Recognize i[34]86-unknown-freebsd.
        From Shawn M Carey <[email protected]>.

Thu Mar  3 14:24:21 1994  Per Bothner  ([email protected])

        * configure.in (noconfigdirs for alpha): Remove libg++ and libio.

Wed Mar  2 13:28:48 1994  Jim Kingdon  ([email protected])

        * config.guess: Check for ptx.

Mon Feb 28 16:46:50 1994  Kung Hsu  ([email protected])

        * config.sub: Add os9k checking.

Thu Feb 24 07:09:04 1994  Jeffrey A. Law  ([email protected])

        * config.guess: Handle OSF1 running on HPPA processors

Fri Feb 18 14:14:00 1994  Ken Raeburn  ([email protected])

        * configure: If subdir configure fails, print out a message with
        subdirectory name, in case subdir's configure code didn't identify
        itself.

Fri Feb 18 12:50:15 1994  Doug Evans  ([email protected])

        * configure.in: Remove embedded newlines from configdirs.
        Avoid mismatches of substrings.  Fix matching strings at end
        of configdirs.

Fri Feb 11 15:33:33 1994  Stu Grossman  (grossman at cygnus.com)

        * config.guess:  Add Lynx/rs6000 config support.

Tue Feb  8 13:41:09 1994  Ken Raeburn  ([email protected])

        * configure.in (alpha-dec-osf1*, alpha*-*-*): Build gas.

Mon Feb  7 15:42:36 1994  Jeffrey A. Law  ([email protected])

        * configure.in (hppa*-*-osf*): Treat this just like most other
        PA configurations (eg no binutils or ld).
        (hppa*-*-*elf*): These configurations have binutils and ld.

Sun Feb  6 16:35:07 1994  Jeffrey A. Law  ([email protected])

        * config.sub (hiux): Fix typo.  From [email protected].

Sat Feb  5 01:00:33 1994  Ian Lance Taylor  ([email protected])

        * configure.in (rs6000-*-*): Build gas.

Wed Feb  2 13:57:57 1994  Jeffrey A. Law  ([email protected])

        * Makefile.in:  Avoid bug in losing hpux sed.

Wed Feb  2 14:53:05 1994  Jim Kingdon  ([email protected])

        * Makefile.in, test-build.mk: Remove MUNCH_NM; it was only needed
        for GDB and GDB has been fixed to not need it.

Mon Jan 31 18:40:55 1994  Stu Grossman  (grossman at cygnus.com)

        * config/mh-lynxosrs6k:  Account for lack of ranlib!

Sun Jan 30 17:58:06 1994  Ken Raeburn  ([email protected])

        * config.guess: Recognize vax hosts.

Fri Jan 28 15:29:38 1994  Ken Raeburn  ([email protected])

        * configure (while loop): Don't use "break 2" inside case
        statement -- the case statement isn't an enclosing loop.

Mon Jan 24 18:40:06 1994  Per Bothner  ([email protected])

        * config.guess:  Clean up NeXT support, to allow nextstep
        on Intel machines.  Make OS be nextstep.

Sun Jan 23 18:47:22 1994  Richard Kenner  ([email protected])

        * config.guess: Add alternate forms for Convex.

Thu Jan 20 16:13:41 1994  Stu Grossman  (grossman at cygnus.com)

        * configure:  Completely rewrite option processing.  Take
        advantage of pattern-matching to avoid invoking test frequently.
        Also clean up host and target defaulting logic.

Mon Jan 17 15:06:56 1994  Ken Raeburn  ([email protected])

        * Makefile.in: Replace all occurrances of "rootme" with "r" and
        "$${rootme}" with "$$r", to increase the likelihood that the do-*
        commands (plus user environment) will fit SCO limits.

Thu Jan  6 11:20:57 1994  Ian Lance Taylor  ([email protected])

        * configure.in: Don't issue warnings about directories which are
        not being configured if -norecursion is set.  Correct test for
        --with-gnu-as and --with-gnu-ld to not get confused by substring
        matches.

        * configure.in: Don't build gas for alpha-dec-osf1*.

Tue Jan  4 17:10:19 1994  Stu Grossman  (grossman at cygnus.com)

        * configure:  Back out Per's change of 12/19/1993.  It changes the
        behavior of configure in unexpected and confusing ways.

        Also, use different delim char when calculating
        program_transform_name so that the name can contain slashes.

Sat Jan  1 13:45:31 1994  Rob Savoye  ([email protected])

        * configure.in, config.sub: Add support for VSTa micro-kernel.

Sat Dec 25 20:00:47 1993  Jeffrey A. Law  ([email protected])

        * configure.in: Nuke hacks which were used to get a special
        version of GAS for HPPA configurations.

Sun Dec 19 20:40:44 1993  Per Bothner  ([email protected])

        * configure:  If only ${target_alias} is given, use that
        as the default for ${host_alias}.
        * configure:  Add missing back-slashes before nested quotes.

Wed Dec 15 18:07:18 1993  david d `zoo' zuhn  ([email protected])

        * Makefile.in (BASE_FLAGS_TO_PASS): add YACC=$(BISON)

Tue Dec 14 21:25:33 1993  Per Bothner  ([email protected])

        * config.guess:  Recognize some Tektronix configurations.
        From Kaveh R. Ghazi <[email protected]>.

Sat Dec 11 11:18:00 1993  Steve Chamberlain  ([email protected])

        * config.sub: Match any flavor of SH.

Thu Dec  2 17:16:58 1993  Ken Raeburn  ([email protected])

        * configure.in: Don't try to configure newlib for Alpha.

Thu Dec  2 14:35:54 1993  Ian Lance Taylor  ([email protected])

        * configure.in: Don't build ld for Irix 5.  Don't build gas,
        libg++ or libio for any Alpha target.

        * configure.in (mips*-sgi-irix5*): New target; use mh-irix5.
        * config/mh-irix5. New file for Irix 5.

Wed Dec  1 17:00:33 1993  Jason Merrill  ([email protected])

        * Makefile.in (GZIPPROG): Renamed from GZIP, which gzip uses for
        default arguments -- so it tried to compress itself.

Tue Nov 30 13:45:15 1993  david d `zoo' zuhn  ([email protected])

        * configure.in (notsupp): ensure that a space is always at the end
          of the configdirs list, since the grep checks for an explicit space

Tue Nov 16 15:04:27 1993  david d `zoo' zuhn  ([email protected])

        * configure.in (target i386-sysv4.2): don't build ld, since static
          versions of many libraries are not available.

Tue Nov 16 14:28:12 1993  Jim Kingdon  ([email protected])

        * config.guess: Recognize Apollos (using environment variables).
        * configure.in: Don't configure ld, binutils, or gprof for Apollo.

Thu Nov 11 12:03:50 1993  Jim Kingdon  ([email protected])

        * config.guess: Recognize Sony news mips running newsos.

Wed Nov 10 16:57:00 1993  Mark Eichin  ([email protected])

        * Makefile.in (all-cygnus, build-cygnus): "fi else" needs to be
        "fi ; else" for bash.

Tue Nov  9 15:54:01 1993  Mark Eichin  ([email protected])

        * Makefile.in (BASE_FLAGS_TO_PASS): pass SHELL.

Fri Nov  5 08:07:27 1993  D. V. Henkel-Wallace  ([email protected])

        * config.sub: accept unixware as an alias for svr4.2.
        Fix some inconsistancies with the gcc version.

Fri Nov  5 15:14:12 1993  Jim Kingdon  ([email protected])

        * Makefile.in (DISTDOCDIRS):  Add gdb.

Fri Nov  5 11:59:42 1993  Per Bothner  ([email protected])

        * Makefile.in (DISTDOCDIRS):  Add libg++ and libio.

Fri Nov  5 10:35:05 1993  Ken Raeburn  ([email protected])

        * Makefile.in (taz): Only build "info" in DISTDOCDIRS.
        (DISTDOCDIRS): Don't assume libg++ and gdb folks necessarily want
        this now.

Thu Nov  4 18:58:23 1993  Jim Kingdon  ([email protected])

        * config.sub: Accept hiux* as an OS name.

        * Makefile.in: Change RUNTEST_FLAGS back to RUNTESTFLAGS per
        etc/make-stds.texi.  The underscore came from gcc, and dje now
        agrees that RUNTESTFLAGS is the correct name.

Thu Nov  4 10:49:01 1993  Per Bothner  ([email protected])

        * install.sh:  Remove 'set -e'.  It makes any conditionals
        in the script useless.

        * config.guess: Automatically recognize arm-acorn-riscix
        Patch from Richard Earnshaw ([email protected]).

Thu Nov 04 08:08:04 1993  Jeffrey Wheat  ([email protected])

        * Makefile.in: Change RUNTESTFLAGS to RUNTEST_FLAGS

Wed Nov  3 22:09:46 1993  Ken Raeburn  ([email protected])

        * Makefile.in (DISTDOCDIRS): New variable.
        (taz): Edit local Makefile.in sooner, instead of proto-toplev
        Makefile.in later.  Build "info" and "dvi" in DISTDOCDIRS.  

Wed Nov  3 21:31:52 1993  david d `zoo' zuhn  ([email protected])

        * configure.in (hppa target): check the source directory for the
          pagas sub-directory

Wed Nov  3 11:12:22 1993  Doug Evans  ([email protected])

        * config.sub: Allow -aout* and -elf*.

Wed Nov  3 11:08:33 1993  Ken Raeburn  ([email protected])

        * configure.in: Don't build ld on i386-solaris2, same as for
        sparc-solaris2.

Tue Nov  2 14:21:25 1993  Per Bothner  ([email protected])

        * Makefile.in (taz): Add texinfo/lgpl.texinfo (for libg++).

Tue Nov  2 13:38:30 1993  Peter Schauer  ([email protected])

        * configure.in:  Configure gdb for alpha.

Mon Nov  1 10:42:54 1993  Jim Kingdon  ([email protected])

        * Makefile.in (CXXFLAGS): Add -O.

Wed Oct 27 10:45:06 1993  david d `zoo' zuhn  ([email protected])

        * config.guess: added support for DG Aviion

Tue Oct 26 14:37:37 1993  Ken Raeburn  ([email protected])

        * configure.in: Produce warning message for subdirectories not
        configurable for this host/target combination.  Don't try to
        configure gdb for vms.

Mon Oct 25 11:22:15 1993  Ken Raeburn  ([email protected])

        * Makefile.in (taz): Replace "byacc" with "bison -y" in the
        appropriate files before making "diststuff".
        (DISTBISONFILES): New var: list of files to be edited.
        (DISTSTUFFDIRS): Add binutils.

Fri Oct 22 20:32:15 1993  david d `zoo' zuhn  ([email protected])

        * config.sub: also handle mipsel and mips64el (for little endian mips)

Fri Oct 22 07:59:20 1993  Jim Kingdon  ([email protected])

        * configure.in: Add * to end of all OS names.

Thu Oct 21 11:38:28 1993  Stan Shebs  ([email protected])

        * configure.in: Build newlib for LynxOS native.

Wed Oct 20 09:56:12 1993  Jim Kingdon  ([email protected])

        * config.guess: Add support for delta 88k running SVR3.

        * configure.in: Add comment about HP compiler vs. emacs.

Tue Oct 19 16:02:22 1993  david d `zoo' zuhn  ([email protected])

        * configure.in: don't build ld on solaris2 (not a viable option
          due to bugs in getpwnam & getpwuid)

Tue Oct 19 15:13:56 1993  Ken Raeburn  ([email protected])

        * configure.in: Accept alpha-dec-osf1*, not just -osf1, since
        config.guess will produce a full version number.

Tue Oct 19 15:58:01 1993  Ian Lance Taylor  ([email protected])

        * configure.in: Build linker and binutils for alpha-dec-osf1.

Tue Oct 19 11:41:55 1993  Jim Kingdon  ([email protected])

        * Makefile.in: Remove -O from CXXFLAGS for consistency with CFLAGS,
        and gdb/testsuite/Makefile.in.

Sat Oct  9 18:39:07 1993  david d `zoo' zuhn  ([email protected])

        * configure.in: recognize mips*- instead of mips-

Fri Oct  8 14:15:39 1993  Ken Raeburn  ([email protected])

        * config.sub: Accept linux*coff and linux*elf as operating
        systems.

Thu Oct  7 12:57:19 1993  Ian Lance Taylor  ([email protected])

        * config.sub: Recognize mips64, and mips3 as an alias for it.

Wed Oct  6 13:54:21 1993  Peter Schauer  ([email protected])

        * configure.in: Remove alpha-dec-osf*, no longer necessary now that
        gdb knows how to handle OSF/1 shared libraries.

Tue Oct  5 11:55:04 1993  Jim Kingdon  ([email protected])

        * configure.in: Recognize hppa*-*-hiux* (currently synonym for hpux).
        * config.guess: Recognize Hitachi's HIUX.
        * config.sub: Recognize h3050r* and hppahitachi.
        Remove redundant cases for hp9k[23]*.

Mon Oct  4 16:15:09 1993  david d `zoo' zuhn  ([email protected])

        * configure.in: default to '--with-gnu-as' and '--with-gnu-ld'
        if gas and ld are in the source tree and are in ${configdirs}.
        If ${use_gnu_as} or ${use_gnu_ld} are 'no', then don't set the
        the --with options (but still pass them down on the command line,
        if they were explicitly specified).

Fri Sep 24 19:11:13 1993  david d `zoo' zuhn  ([email protected])

        * configure: substitute SHELL value in Makefile.in with
        ${CONFIG_SHELL}

Thu Sep 23 18:05:13 1993  Ian Lance Taylor  ([email protected])

        * configure.in: Build gas, ld, and binutils for *-*-sysv4* and
        *-*-solaris2* targets.

Sun Sep 19 17:01:41 1993  david d `zoo' zuhn  ([email protected])

        * Makefile.in: define M4, and pass it down to sub-makes;
        all-autoconf now depends on all-m4

Sat Sep 18 00:38:23 1993  david d `zoo' zuhn  ([email protected])

        * Makefile.in ({AR,RANLIB}_FOR_TARGET): make contingent on
        presence of {ar,ranlib} instead of a configured directory

Wed Sep 15 08:41:44 1993  Jim Kingdon  ([email protected])

        * config.guess: Accept 34?? as well as 33?? for NCR.

Mon Sep 13 12:28:43 1993  david d `zoo' zuhn  ([email protected])

        * configure.in: grab mt-hppa for HPPA targets; use 'gas ' instead
        of 'gas' in sed commands, since 'gash' is now in the tree as well.

Fri Sep 10 11:23:52 1993  david d `zoo' zuhn  ([email protected])

        * configure: grab values for $(CC) and $(CXX) from the
        environment, so that someone can do "CC=gcc configure; make" and
        have it work right (matching the way that autoconf works now)

        * configure.in, Makefile.in: add support for gash, the tcl
        interface to Galaxy

        * config.guess: add NetBSD variants (hp300, x86)

Thu Sep  9 16:48:52 1993  Jason Merrill  ([email protected])

        * install.sh: Support -d option (in the manner of SunOS 4 install,
        as it is more deterministic than that of GNU install)
        (chmodcmd): Set file to mode 755 by default (should also do default
        chgrp and chown, but I don't feel like dealing with that now)

Tue Sep  7 11:59:39 1993  Doug Evans  ([email protected])

        * config.sub: Remove h8300hhms alias.

Tue Aug 31 11:00:09 1993  Jim Kingdon  ([email protected])

        * configure.in: Match *-*-solaris2* not *-sun-solaris2*.

Mon Aug 30 18:29:10 1993  david d `zoo' zuhn  ([email protected])

        * Makefile.in (gcc-no-fixedincludes): touch stmp-fixproto as well
        as stmp-fixinc

Wed Aug 25 16:35:59 1993  K. Richard Pixley  ([email protected])

        * config.sub: recognize m88110-bug-coff.

Tue Aug 24 10:23:24 1993  david d `zoo' zuhn  ([email protected])

        * Makefile.in (all-libio): all dependencies on the toolchain used
        to build this (gcc, gas, ld, etc)

Fri Aug 20 17:24:24 1993  Jim Kingdon  ([email protected])

        * config.guess: Deal with OSF/1 1.3 on alpha.

Thu Aug 19 11:43:04 1993  david d `zoo' zuhn  ([email protected])

        * install.sh: add some 'else true' clauses for portability

        * configure.in: don't build libio for h8[35]00-*-* targets

Tue Aug 17 19:02:31 1993  Per Bothner  ([email protected])

        * Makefile.in:  Add support for new libio.

Sun Aug 15 20:48:55 1993  Jim Kingdon  ([email protected])

        * install.sh: If one command fails, don't try the rest.  Don't try
        to remove $dsttmp (via trap) unless we have already created it.
        If $src doesn't exist, detect it and exit with an error.

        * config.guess: Recognize BSD on hp300.

Wed Aug 11 18:35:13 1993  Per Bothner  ([email protected])

        * config.guess:  Map (9000/[34]??:HP-UX:*:*) to m68k-hp-hpux.
        Bug report from "Hamish (H.I.) Macdonald" <[email protected]>.

Wed Aug 11 15:37:51 1993  Jason Merrill  ([email protected])

        * Makefile.in (all-send-pr): depends on all-prms

Wed Aug 11 16:56:03 1993  Jim Kingdon  ([email protected])

        * config.guess: Fix typo (9000/8??:4.3bsd -> 9000/7??:4.3bsd).

Fri Aug  6 14:45:02 1993  Ian Lance Taylor  ([email protected])

        * config.guess: From [email protected] (Michael Rendell):
        Added test for mips-mips-riscos5.

Thu Aug  5 15:45:08 1993  david d `zoo' zuhn  ([email protected])

        * configure.in: use mh-hp300 for 68k HP hosts

Mon Aug  2 11:56:53 1993  david d `zoo' zuhn  ([email protected])

        * configure: add support for CONFIG_SHELL, so that you can use
        some alternate shell for evaluating configure scripts

Sun Aug  1 11:36:27 1993  Fred Fish  ([email protected])

        * Makefile.in (make-gdb.tar.gz):  Sed bug reporting address
        in configure script to [email protected] when building
        distribution archive.
        * Makefile.in (COMPRESS):  Remove def.
        * Makefile.in (gdb.tar.gz, make-gdb.tar.gz):  Renamed from
        gdb.tar.Z and make-gdb.tar.Z respectively.
        * Makefile.in (make-gdb.tar.gz):  Now only build gzip'd archive.
        * Makefile.in (make-gdb.tar.gz):  Minor changes to move closer
        to convergence with 'taz' target in Makefile.in.

Fri Jul 30 12:34:57 1993  david d `zoo' zuhn  ([email protected])

        * install.sh (dsttmp): use trap to ensure that tmp files go
        away on error conditions

Wed Jul 28 11:57:36 1993  david d `zoo' zuhn  ([email protected])

        * Makefile.in (BASE_FLAGS_TO_PASS): remove LOADLIBES

Tue Jul 27 12:43:40 1993  Jim Kingdon  ([email protected])

        * Makefile.in (install-dirs): Deal with a prefix like /gnu;
        its parent is '/' not ''.

        * Makefile.in (DEVO_SUPPORT): Add comments about ChangeLog.

Fri Jul 23 09:53:37 1993  Jason Merrill  ([email protected])

        * configure: if ${newsrcdir}/configure doesn't exist, don't assume
        that ${newsrcdir}/configure.in does.

Tue Jul 20 11:28:50 1993  david d `zoo' zuhn  ([email protected])

        * test-build.mk: support for CONFIG_SHELL

Mon Jul 19 21:54:46 1993  Fred Fish  ([email protected])

        * config.sub (netware):  Add as a basic system type.

Wed Jul 14 12:03:11 1993  K. Richard Pixley  ([email protected])

        * Makefile.in (Makefile): depend on configure.in.  Also drop the
          $(srcdir)/ from the dependency on Makefile.in.

Tue Jul 13 20:10:58 1993  Doug Evans  ([email protected])

        * config.sub: Recognize h8300hhms as h8300h-hitachi-hms.
        (h8300hhms is temporary until multi-libraries are implemented).
        * configure.in: Handle h8300h too.

Sun Jul 11 17:35:27 1993  Jim Kingdon  ([email protected])

        * config.guess: Recognize dpx/2 as m68k-bull-sysv3.

Thu Jul  8 18:26:12 1993  John Gilmore  ([email protected])

        * configure:  Remove extraneous output when guessing host type.
        * config.guess:  Remove extraneous output when guessing using C
        compiler rather than uname, or when guessing fails.

Wed Jul  7 17:58:14 1993  david d `zoo' zuhn  (zoo at rtl.cygnus.com)

        * Makefile.in: remove all.cross and install.cross targets

        * configure: remove CROSS=-DCROSS_COMPILE and ALL=all.cross
          definitions

Tue Jul  6 10:39:44 1993  Steve Chamberlain  ([email protected])

        * configure.in (target sh): Build gprof.

Thu Jul  1 16:52:56 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * config.sub: change -solaris to -solaris2

Thu Jul  1 15:46:16 1993  Jim Kingdon  ([email protected])

        * configure.in: Use config/mh-riscos for mips-*-sysv*.

Wed Jun 30 09:31:58 1993  Ian Lance Taylor  ([email protected])

        * configure: Correct error message for missing Makefile.in to
        print correct directory.

Tue Jun 29 13:52:16 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * install.sh: kludge around 386BSD shell bug

Tue Jun 29 13:06:49 1993  Per Bothner  ([email protected])

        * config.guess:  Recognize NeXT.
        * config.guess:  Recognize i486-ncr-sysv4.
        * Makefile.in (taz):  rm $(TOOL)-$$VER before linking.

Tue Jun 29 12:50:57 1993  Ian Lance Taylor  ([email protected])

        * Makefile.in (MAKEINFOFLAGS): New variable.
        (FLAGS_TO_PASS): Pass MAKEINFO as MAKEINFO MAKEINFOFLAGS.
        * build-all.mk, test-build.mk: Pass down --no-split as
        MAKEINFOFLAGS when hosted on DOS.  Compile DOS hosted without -g.

Thu Jun 24 13:39:11 1993  Per Bothner  ([email protected])

        * Makefile.in (DEVO_SUPPORT):  Add COPYING COPYING.LIB install.sh.

Wed Jun 23 12:59:21 1993  Per Bothner  ([email protected])

        * Makefile.in (libg++.tar.z):  New rule.
        * Makefile.in (taz):  Replace 'configure -rm' by 'make distclean'.
        * Makefile.in (taz):  Only do a single chmod.

Fri Jun 18 12:03:10 1993  david d `zoo' zuhn  (zoo at majipoor.cygnus.com)

        * install.sh: don't use dirname anymore (replaced with sed usage)

Thu Jun 17 18:43:42 1993  Fred Fish  ([email protected])

        * Makefile.in:  Change extension for gzip'd files from '.z' to
        '.gz' per new FSF standard usage.

Thu Jun 17 16:58:50 1993  david d `zoo' zuhn  (zoo at majipoor.cygnus.com)

        * configure: put quotes around the final value of program_transform_name

Tue Jun 15 16:48:51 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * Makefile.in: new install.sh support; update install-info rules

Wed Jun  9 12:31:34 1993  Ian Lance Taylor  ([email protected])

        * configure.in: Build diff for crosses, but not for go32 host.

        * configure.in: Build gprof only for native, and don't build it
        for mips-*-*, rs6000-*-*, or i[34]86-*-sco*.

Mon Jun  7 13:12:11 1993  david d `zoo' zuhn  (zoo at deneb.cygnus.com)

        * configure.in: don't build gas,ld,binutils on for *-*-sysv4

Mon Jun  7 11:40:11 1993  Brendan Kehoe  ([email protected])

        * configure.in (host_tools): Add prms.

Fri Jun  4 13:30:42 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * Makefile.in: install gcc, do installation of $(INSTALL_MODULES)
        with $(FLAGS_TO_PASS) on the command line

        * config.sub: Recognize lynx and lynxos

Fri Jun  4 10:59:56 1993  Ian Lance Taylor  ([email protected])

        * config.sub: Accept -ecoff*, not just -ecoff.

Thu Jun  3 17:38:54 1993  Ken Raeburn  ([email protected])

        * Makefile.in (taz): Use .gz suffix instead of .z.
        (binutils.tar.gz, gas+binutils.tar.gz, gas.tar.gz): Fixed target
        names.

Thu Jun  3 00:27:06 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * Makefile.in (vault-install): add an 'else true' (for Ultrix)

Wed Jun  2 18:19:16 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * Makefile.in (install-no-fixedincludes):  install gcc last, so
        that rebuilds that might happen during 'make install' don't get
        bogus gcc include files

Wed Jun  2 16:14:10 1993  Ken Raeburn  ([email protected])

        Change from Utah for HPPA support:
        * config.guess: Recognize hppa1.x-hp-bsd.

Wed Jun  2 11:53:33 1993  Per Bothner  ([email protected])

        * config.guess:  Add support for Motorola Delta 68k, up to r3v7.
        Patch from [email protected] (Francesco Potorti`).

Tue Jun  1 17:48:42 1993  Rob Savoye  (rob at darkstar.cygnus.com)

        * config.sub: Add support for rom68k and bug boot monitors.

Mon May 31 09:36:37 1993  Jim Kingdon  ([email protected])

        * Makefile.in: Make all-opcodes depend on all-bfd.

Thu May 27 08:05:31 1993  Ian Lance Taylor  ([email protected])

        * config.guess: Added special check for i[34]86-univel-sysv4*.

Wed May 26 16:33:40 1993  Ian Lance Taylor  ([email protected])

        * config.guess: For i[34]86-unknown-sysv4 use UNAME_MACHINE for
        the processor rather than assuming i486.

Wed May 26 09:40:18 1993  Jim Kingdon  ([email protected])

        * config.guess: Recognize SunOS6 as Solaris3.

Tue May 25 23:03:11 1993  Per Bothner  ([email protected])

        * config.guess:  Fix typo.  Avoid #elif (not in K&R 1).
        Recognize SunOS 5.* only (and not [6-9].*) as being Solaris2.

Tue May 25 12:44:18 1993  Ian Lance Taylor  ([email protected])

        * build-all.mk (all-cross): New target for Canadian Cross.
        Added Q2 go32 targets.
        * test-build.mk: Configure go32 cross sparclite-aout and
        mips-idt-ecoff -with-gnu-ld.  Moved build binary directory from
        PARTIAL_HOLE_DIRS to BUILD_HOLES_DIRS.

Mon May 24 15:30:06 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * configure.in: fix Alpha GDB typo; also, don't build DejaGnu for
        GO32 hosted toolchains

Mon May 24 14:18:41 1993  Rob Savoye  (rob at darkstar.cygnus.com)

        * configure: change  so "-exec-prefix" gets passed down rather
        than "-exec_prefix" so autoconf generated Makefiles get the
        exec_prefix set right.

Fri May 21 10:42:25 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * config.guess: get the Solaris2 minor version number

        * Makefile.in: add standards.texi and make-stds.texi to ETC_SUPPORT

Fri May 21 06:20:52 1993  Brendan Kehoe  ([email protected])

        * config.guess: Recognize some Sequent platforms.

Thu May 20 14:33:48 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * Makefile.in: added the vault-install target

        * configure.in: actually use the Sun3 makefile fragment that's in
        config, also added the release dir to configdirs

Thu May 20 14:19:18 1993  Ken Raeburn  ([email protected])

        * Makefile.in (taz): Fix modes on stuff in $(TOOL) dir also.

Tue May 18 20:26:41 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * configure.in: remove some program from Alpha targetted toolchains

Tue May 18 15:23:19 1993  Ken Raeburn  ([email protected])

        * Makefile.in (DISTSTUFFDIRS): Renamed from PROTODIRS.  Add ld and
        gprof.
        (taz): Run "make diststuff" in those directories instead of "make
        proto-dir".  Look for "VERSION=" only at start of line in subdir
        Makefile.  Use "gzip -9" for compression.
        (TEXINFO_SUPPORT, DIST_SUPPORT, BINUTILS_SUPPORT_DIRS): New vars.
        (binutils.tar.z): New target.

Mon May 17 17:01:15 1993  Ken Raeburn  ([email protected])

        * Makefile.in (taz): Include gpl.texinfo.

Fri May 14 06:48:38 1993  Ken Raeburn  ([email protected])

        * Makefile.in (setup-dirs): Merged into "taz" target.
        (taz): Only do `proto-dir' stuff if a directory is actually needed
        for this target.

Wed May 12 13:09:44 1993  Ian Lance Taylor  ([email protected])

        * Makefile.in (MUNCH_NM): New variable, defined to be $(NM).
        (FLAGS_TO_PASS): Pass down MUNCH_NM.
        (HOST_CC, HOST_PREFIX, HOST_PREFIX_1): New variables.
        (EXTRA_GCC_FLAGS): Pass down HOST_* variables.
        (gcc-no-fixedincludes): Correct for current gcc Makefile.

Tue May 11 10:14:25 1993  Fred Fish  ([email protected])

        * Makefile.in (make-gdb.tar.Z):  Add configure, config.guess,
        config.sub, and move-if-change to gdb testsuite distribution
        archive, so the testsuite can be extracted, configured, and
        run separately from the gdb distribution.  Blow away the Chill
        tests that require a Chill compiled executable, since GNU Chill
        is not yet publically available.

Mon May 10 17:22:26 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * test-build.mk: set environment variables in a single command,
        instead of a list of assignments and exports

        * config.guess: recognize Alpha/OSF1 systems

Mon May 10 14:55:51 1993  K. Richard Pixley  ([email protected])

        * configure: Change help message to prefer --options rather than
          -options.

Mon May 10 05:58:35 1993  Ken Raeburn  ([email protected])

        * config.sub: Convergent Tech. "miniframe" uses m68010, sez
        [email protected].
        * config.guess: Recognize miniframe.

Sun May  9 17:47:57 1993  Rob Savoye  (rob at darkstar.cygnus.com)

       * Makefile.in: Use srcroot to find runtest rather than rootme.
       Pass RUNTESTFLAGS and EXPECT down in BASE_FLAGS_TO_PASS.

Fri May  7 14:55:59 1993  Ian Lance Taylor  ([email protected])

        * test-build.mk: Extensive additions to support building on a
        machine other than the host.

Wed May  5 08:35:04 1993  Ken Raeburn  ([email protected])

        * configure (tooldir): Fix for i386-aix again.

Mon May  3 19:00:27 1993  Per Bothner  ([email protected])

        * configure, Makefile.in:  Change definition of $(tooldir)
        to match the FSF.

Fri Apr 30 15:55:21 1993  Fred Fish  ([email protected])

        * config.guess:  Recognize i[34]86/SVR4.

Fri Apr 30 15:52:46 1993  Steve Chamberlain  ([email protected])

        * Makefile.in (all-gdb): gdb depends on sim.

Thu Apr 29 23:30:48 1993  Fred Fish  ([email protected])

        * Makefile.in (gdb.tar.Z):  Make prototype gdb testsuite directory
        at the same time we make the prototype gdb directory.
        * Makefile.in (make-gdb.tar.Z):  Make the testsuite distribution
        files at the same time as the gdb base release distribution.

Thu Apr 29 12:50:37 1993  Ian Lance Taylor  ([email protected])

        * Makefile.in (check): Use individual check targets rather than
        DO_X rule.
        (check-gcc): Added.

Thu Apr 29 09:50:07 1993  Jim Kingdon  ([email protected])

        * config.sub: Use sysv3.2 not sysv32 for canonical OS
        for System V release 3.2.

Thu Apr 29 10:33:22 1993  Ken Raeburn  ([email protected])

        * config.sub: Recognize hppaosf.
        * configure.in: Do configure ld/binutils/gas for it.

Tue Apr 27 06:25:34 1993  Ken Raeburn  ([email protected])

        * configure (tooldir): Alter syntax used to set this, for systems
        where "\$" isn't handled right, like i386-aix.

Thu Apr 22 08:17:35 1993  Ian Lance Taylor  ([email protected])

        * configure: Pass program-transform-name, not
        program_transform_name, to recursive configures.

Thu Apr 22 02:58:21 1993  Ken Raeburn  ([email protected])

        * Makefile.in (gas+binutils.tar.z): New rule for building snapshots
        of gas+ld+binutils.

Mon Apr 19 17:41:30 1993  Per Bothner  ([email protected])

        * config.guess:  Recognize AIX3.2 as distinct from 3.1.

Sat Apr 17 17:19:50 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * configure.in: rename m88k-motorola-m88kbcs to m88k-motorola-sysv

        * config/mh-delta88: remove extraneous GCC references

Tue Apr 13 16:52:16 1993  Brendan Kehoe  ([email protected])

        * Makefile.in (PRMS): Set back to all-prms.

Sat Apr 10 12:04:07 1993  Ian Lance Taylor  ([email protected])

        * test-build.mk: Pass -with-gnu-as for known MIPS native and MIPS
        targets, rather than for MIPS hosts.

Fri Apr  9 13:51:06 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * configure.in: add comment for --with-x default values

        * config.guess: handle Motorola Delta88 box for SVR3 and SVR4.

        * Makefile.in: add check-* targets for each of the directories in
        the tree.  Add a definition of RUNTEST that will use the one we
        just built, if it exists.  Pass this down via FLAGS_TO_PASS.

Thu Apr  8 09:21:30 1993  Ian Lance Taylor  ([email protected])

        * configure.in: Removed obsolete references to bfd_target and
        target_makefile_frag.

        * build-all.mk: Set assorted targets for Q2.
        * config.sub: Recognize z8k-sim and h8300-hms.
        * test-build.mk: Really don't pass host to configure.
        (HOLES): Added uname.

Wed Apr  7 15:48:19 1993  Ian Lance Taylor  ([email protected])

        * configure: Handle an empty program-prefix, program-suffix or
        program-transform-name correctly.

Tue Apr  6 13:48:41 1993  Ian Lance Taylor  ([email protected])

        * build-all.mk: -G 8 no longer required for MIPS targets.
        * test-build.mk: Don't pass host argument to configure; make it
        guess.

Tue Apr  6 10:36:53 1993  Fred Fish  ([email protected])

        * Makefile.in (gdb.tar.Z):  Fix for building gzip'd distribution.
        * Makefile.in (COMPRESS):  New macro, like GZIP.

Fri Apr  2 09:02:31 1993  Ian Lance Taylor  ([email protected])

        * test-build.mk: Use -with-gnu-as for mips-sgi-irix4 as well.

        * build-all.mk: Set GCC to gcc -O -G 8 for MIPS targets, since gcc
        with gas currently defaults to -G 0.

Thu Apr  1 08:25:42 1993  Ian Lance Taylor  ([email protected])

        * Makefile.in (all-flex): flex depends on byacc.

        * build-all.mk: If host not specified, use config.guess.  Pass TAG
        to test-build.mk as RELEASE_TAG.
        * test-build.mk (configargs): New variable containing arguments to
        pass to configure.  Set to -with-gnu-as on mips-dec-ultrix.
        (FLAGS_TO_PASS): Pass down RELEASE_TAG.

        * config.guess: Use /bin/uname when checking -X argument on SCO,
        to avoid invoking GNU uname which doesn't understand -X.

        * test-build.mk: Don't use /usr/unsupported/bin/as on AIX.

        * configure.in: Build gas for mips-*-*.

Wed Mar 31 21:20:58 1993  K. Richard Pixley  ([email protected])

        * Makefile.in (all.normal): insert missing backslash.

Wed Mar 31 12:31:56 1993  Ian Lance Taylor  ([email protected])

        * build-all.mk, config/mh-irix4: Bump -XNh value to 1500 to match
        gcc requirements.

        * Makefile.in: Complete overhaul to merge many almost identical
        targets.

Tue Mar 30 20:17:01 1993  Ken Raeburn  ([email protected])

        * Makefile.in (setup-dirs-gdb): Renamed from setup-dirs.
        (gdb.tar.Z): Adjusted.

        * Makefile.in (setup-dirs, taz): New targets; should be general
        enough to adapt for gdb sometime.  Build only .z file.
        (gas.tar.z): New target.

Tue Mar 30 10:03:09 1993  Ian Lance Taylor  ([email protected])

        * build-all.mk: Use CC=cc -Xs on Solaris.

Mon Mar 29 19:59:26 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * config/mh-sun3: cc needs -J to compile cp-parse.c correctly

        * config/mh-solaris: SunPRO C needs -Xs to be able to get a
        working xmakefile for Emacs.

Thu Mar 25 15:14:30 1993  Fred Fish  ([email protected])

        * Makefile.in:  Incorporate changes suggested by [email protected]
        for handling BISON for FSF releases.

Thu Mar 25 06:19:48 1993  Ken Raeburn  ([email protected])

        * configure: Actually implement the change zoo just documented.

Wed Mar 24 13:02:44 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)

        * configure: when using config.guess, only set target_alias when
        it's not already been set (ie, on the command line)

Mon Mar 22 23:07:39 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * Makefile.in: add installcheck target, set PRMS to install-prms

Sun Mar 21 16:46:12 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * configure: add support for package_makefile_fragment, handle the
        case where a directory has a configure.in file but no Makefile.in
        more gracefully (with an actual understandable error message, even);
        add support for --without (and add this to the usage message); also
        explicitly add a --host=${host_alias} to the command line when
        config.guess is used

Sun Mar 21 12:11:58 1993  Jim Wilson  ([email protected])

        * configure: Must use both --host and --target in recursive calls.

Thu Mar 18 12:31:35 1993  Ian Lance Taylor  ([email protected])

        * Makefile.in: Change deja-gnu to dejagnu.

Mon Mar 15 15:44:35 1993  Ian Lance Taylor  ([email protected])

        * configure.in (h8300-*-*, h8500-*-*): Don't build libg++.

Fri Mar 12 18:30:14 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * configure.in: canonicalize all instances to *-*-solaris2*,
        also strip out a number of tools to not build for go32 host

Wed Mar 10 12:08:27 1993  K. Richard Pixley  ([email protected])

        * config.guess: add GPL.

        * Makefile.in, config.guess, config.sub, configure: bump
          copyrights to 93.

Wed Mar 10 07:12:48 1993  Ian Lance Taylor  ([email protected])

        * Makefile.in (do-info): Removed obsolete check for existence of
        localenv file.

        * Makefile.in (MAKEOVERRIDES): Define to be empty.

Wed Mar 10 03:11:56 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * Makefile.in: a couple of 'else true' for decstation,
        support for TclX

        * configure.in: configure tclX too; don't remove Tk on RS/6000 anymore

Tue Mar  9 16:06:12 1993  K. Richard Pixley  ([email protected])

        * Makefile.in (setup-dirs): change invocation of make to $(MAKE).

Mon Mar  8 14:52:11 1993  Ken Raeburn  (raeburn@cambridge)

        * config.guess: Recognize i386-ibm-aix (PS/2).
        * configure.in: Use config/mh-aix386 file for it.

Mon Mar  8 11:12:43 1993  Ian Lance Taylor  ([email protected])

        * Makefile.in (GCC_FOR_TARGET): Eliminated definition; use
        CC_FOR_TARGET instead.
        (BASE_FLAGS_TO_PASS): Pass GCC_FOR_TARGET=$(CC_FOR_TARGET).

Wed Mar  3 16:00:28 1993  Steve Chamberlain  ([email protected])

        * Makefile.in: Add sim to list of directories sent with gdb

Wed Mar  3 11:42:39 1993  Ken Raeburn  ([email protected])

        * configure.in: Put back mips-dec-bsd* case.

Tue Mar  2 21:15:58 1993  Fred Fish  ([email protected])

        (Ultrix 2.2 support from Michael Rendell <[email protected]>)
        * configure.in (vax-*-ultrix2*):  Add Ultrix 2.2 triplet.
        * config.guess:  Change 'VAX*:ULTRIX:*:*' to 'VAX*:ULTRIX*:*:*'.
        * config/mh-vaxult2:  New file.

Tue Mar  2 18:11:03 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * configure.in: remove no-op mips-dec-bsd* in "case $target"

        * Makefile.in (dir.info): only run gen-info-dir if it exists,
        (install-info): install dir.info only if it exists,
        (all-expect, install-expect): pass along X11_FLAGS_TO_PASS

Tue Mar  2 09:01:30 1993  Ken Raeburn  ([email protected])

        * configure.in: For vms target, skip bfd, ld, binutils.  Do build
        gas for mips-dec-bsd.

Tue Mar  2 08:35:24 1993  Ian Lance Taylor  ([email protected])

        * configure (makesrcdir): If ${srcdir} is relative and not ".",
        and ${subdir} is not ".", set makesrcdir based on ${invsubdir}.

Tue Feb 23 14:18:28 1993  Mike Werner  ([email protected])

        * configure.in: Added "dejagnu" to hosttools list.

Mon Feb 22 23:28:38 1993  Per Bothner  ([email protected])

        * config.sub, configure.in, config.guess:  Add support
        for Bosx, an AIX variant from Bull.
        Patches from [email protected].

Sun Feb 21 11:15:22 1993  Mike Werner  ([email protected])

        * devo/dejagnu: Initial creation of devo/dejagnu.
        Migrated dejagnu testcases and support files for testing software
        tools to reside as subdirectories, currently called "testsuite",
        within the directory of the software tool.  Migrated all programs,
        support libraries, etc. beloging to dejagnu proper from
        devo/deja-gnu to devo/dejagnu.  These files were moved "as is"
        with no modifications.  The changes to these files which will
        allow them to configure, build, and execute properly will be made
        in a future update.

Fri Feb 19 20:19:39 1993  Brendan Kehoe  ([email protected])

        * Makefile.in: Change send_pr to send-pr.
        * configure.in: Likewise.
        * send_pr: Renamed directory to send-pr.

Fri Feb 19 19:00:13 1993  Per Bothner  ([email protected])

        * Makefile.in:  Add some extra semi-colons (needed if SHELL=bash).

Fri Feb 19 00:59:33 1993  John Gilmore  ([email protected])

        * README:  Update for gdb-4.8 release.
        * Makefile.in (gdb.tar.Z):  Add texinfo/tex3patch.  Build
        gdb-xxx.tar.z (gzip'd) file also.

Thu Feb 18 09:16:17 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * Makefile.in: make all-diff depend on all-libiberty

Tue Feb 16 16:06:31 1993  K. Richard Pixley  ([email protected])

        * config.guess: add vax-ultrix in the spirit of mips-ultrix.

Tue Feb 16 05:57:15 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * configure.in, Makefile.in: add hello, tar, gzip, recode, indent

Tue Feb 16 00:58:20 1993  John Gilmore  ([email protected])

        * Makefile.in (DEVO_SUPPORT):  Remove etc directory
        (ETC_SUPPORT):  Only add the files GDB wants from etc/.
        (gdb.tar.Z):  Use ETC_SUPPORT.  Use byacc when building the file.

Thu Feb 11 20:14:28 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * Makefile.in:  makeinfo binary is in a new location

Tue Feb  9 12:42:27 1993  Ian Lance Taylor  ([email protected])

        * config.sub: Accept -ecoff as an OS.

        * Makefile.in: Various changes to eliminate a level of make
        recursion and reduce the required command line length.
        (BASE_FLAGS_TO_PASS): New variable holding flags passed to all
        sub-makes.
        (EXTRA_HOST_FLAGS, EXTRA_TARGET_FLAGS, EXTRA_GCC_FLAGS): New
        variables holding settings for specific sub-makes.
        (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS, GCC_FLAGS_TO_PASS): Rewrote
        in terms of BASE_FLAGS_TO_PASS.
        (TARGET_LIBS): New variable listing directories which use
        TARGET_FLAGS_TO_PASS.
        (subdir_do): Eliminated.
        (do-*): New set of targets to replace subdir_do.
        (various): All targets which used subdir_do now depend on do-*.
        (local-clean): Renamed from do_clean.
        (local-distclean): New target, dependency of distclean and
        realclean.
        (install-info): Don't create directories.  Depend on dir.info
        rather than calling make recursively.
        (install-dir.info): Eliminated.
        (install-info-dirs): Create all info directories here.
        (dir.info): Depend upon do-install-info.

        * test-build.mk (HOLES): Added false.

Sat Feb  6 14:05:09 1993  Per Bothner  ([email protected])

        * config.guess:  Recognize BSDI and BSDJ (Jolitz 386bsd).

Thu Feb  4 20:49:18 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * Makefile.in (info): remove dependency on all-texinfo.  The
        problem was really in texinfo/C, not at this level.

Thu Feb  4 13:38:41 1993  Ian Lance Taylor  ([email protected])

        * Makefile.in (info): Added dependency on all-texinfo (PR 2112).

Thu Feb  4 01:50:53 1993  John Gilmore  ([email protected])

        * Makefile.in (make-gdb.tar.Z):  Change BISON to 'bison -y' for
        GDB releases.

Wed Feb  3 17:22:16 1993  Ken Raeburn  ([email protected])

        * configure: Include srcdir in message about target of link not
        being found.  Don't convert `-' to `_' in `with' options being
        passed to subdirs.

Tue Feb  2 18:57:59 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * configure.in: add uudecode to host_tools

        * Makefile.in: added {all,install}-uudecode targets, added them to
        the appropriate lists

Tue Feb  2 11:45:53 1993  Ian Lance Taylor  ([email protected])

        * Makefile.in (all-gcc): Added dependency on all-gas.

        * configure.in (mips-*-*): Build ld and binutils.

Mon Feb  1 12:35:41 1993  K. Richard Pixley  ([email protected])

        * configure: check return code from mkdir, print error message and
          exit on failure.

Sat Jan 30 16:40:28 1993  John Gilmore  ([email protected])

        * Makefile.in (make-gdb.tar.Z):  New location for texinfo.tex.

Thu Jan 28 15:09:59 1993  Ian Lance Taylor  ([email protected])

        * test-build.mk (HOLES): Added tar, cpio and uudecode.

Wed Jan 27 16:50:32 1993  Jim Wilson  ([email protected])

        * config.sub (h8500):  Recognize this as a cpu type.

Sat Jan 23 20:32:01 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * configure: source directory missing is no longer a warning

        * configure.in: recognize irix[34]* instead of irix[34]

        * Makefile.in: define and pass down X11_LIB

        * config/mh-sco: define X11_LIB to the mess that SCO ODT requires

Sat Jan 23 13:49:40 1993  Per Bothner  ([email protected])

        * guess-systype: Renamed to ...
        * config.guess:  ... by popular request.
        * configure.in, Makefile.in:  Update accordingly.

Thu Jan 21 12:20:55 1993  Per Bothner  ([email protected])

        * guess-systype:  Patches from John Eaton <[email protected]>:
        + Add Convex, Cray/Unicos, and Encore/Multimax support.
        + Execute ./dummy instead of assuming . is in PATH.

Tue Jan 19 17:18:06 1993  Per Bothner  ([email protected])

        * guess-systype:  New shell script.  Attempts to guess the
        canonical host name of the executing host.
        Only a few hosts are supported so far.
        * configure:  Call guess-systype if no host is specified.

Tue Jan 19 08:26:07 1993  Ian Lance Taylor  ([email protected])

        * Makefile.in (gcc-no-fixedincludes): Made to work with current
        gcc Makefile.


Fri Jan 15 10:27:02 1993  Ian Lance Taylor  ([email protected])

        * Makefile.in (GCC_FLAGS_TO_PASS): New variable.
        (all-gcc, install-gcc, subdir_do): Use it.

Wed Jan 13 17:06:45 1993  Jim Wilson  ([email protected])

        * Makefile.in: Rename uninstalled gcc driver from gcc to xgcc.

Wed Jan  6 20:29:16 1993  Mike Werner  ([email protected])

        * Makefile.in: Removed explicit setting of SUBDIRS. SUBDIRS is now
          set exclusively by configure, using configure.in .

Wed Jan  6 13:44:11 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * test-build.mk: set $PATH for all builds

        * Makefile.in: pass TARGET_FLAGS_TO_PASS for xiberty and libm

Wed Jan  6 11:02:10 1993  Fred Fish  ([email protected])

        * Makefile.in (GCC_FOR_TARGET):  Supply a default that matches
        the one used in gcc/Makefile.in, so that a null expansion doesn't
        override the one needed to build gcc with a native cc.


Tue Jan  5 07:55:12 1993  Ken Raeburn  ([email protected])

        * configure: Accept -with arguments.

Sun Jan  3 15:15:09 1993  Steve Chamberlain  ([email protected])

        * Makefile.in: added h8300sim

Tue Dec 29 15:06:00 1992  Ian Lance Taylor  ([email protected])

        * config/mh-sco: Don't override BISON definition.

        * build-all.mk: If canonhost is i386-unknown-sco3.2v4, change it
        to i386-sco3.2v4.  Set TARGETS and CFLAGS for i386-sco3.2v4.
        (all-cygnus, native, build-cygnus): Make
        $(canonhost)-stamp-3stage-done, not $(host)....
        * test-build.mk (stamp-3stage-compared): Use tail +10c for
        i386-sco3.2v4.  Added else true to if command.

Mon Dec 28 12:08:56 1992  Ken Raeburn  ([email protected])

        * config.sub: (from FSF) Sequent uses a BSD-like OS.

Mon Dec 28 08:32:06 1992  Minh Tran-Le  ([email protected])

        * configure.in (i[34]86-*-isc*): added; uses mh-sysv.

Thu Dec 24 17:26:24 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * configure.in: don't remove binutils from Solaris builds

Thu Dec 24 14:08:38 1992 david d`zoo' zuhn  ([email protected])

        * Makefile.in: get rid of earlier definitions for *clean,
        also handle the recursive info rule better

Thu Dec 24 12:40:21 1992  Per Bothner  ([email protected])

        * Makefile.in (mostlyclean, distclean, realclean):  Fix to
        do more-or-less the right thing.

Wed Dec 16 10:25:31 1992  Ian Lance Taylor  ([email protected])

        * Makefile.in: Add lines defining CC and CXX, and use CXX rather
        than gcc in definitions of CXX_FOR_BUILD and CXX_FOR_TARGET.

Tue Dec 15 00:34:32 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * Makefile.in: change all $(host_cpu)-$(host_vendor)-$(host_os) to
        $(host_canonical).

        * configure.in: split the configdirs list into 4 categories (native
        v. cross, library v. tool) and handle the cross-only and native-
        only in more reasonable (and correct!) way.

Mon Dec 14 17:04:22 1992  Stu Grossman  (grossman at cygnus.com)

        * configure.in (hppa*-*-*):  Don't remove bfd and gdb from
        configdirs anymore.

Sun Dec 13 00:37:26 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * Makefile.in: extensive cleanup::  removed all of the explicit
        clean-* targets, collapsed many wrappers around subdir_do into
        one, added additional targets to satisfy standards.texi, deleted
        some old targets, some changes for consistency

Fri Dec 11 20:18:02 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * configure.in: handle some programs as cross-only, and others as
        native only

        * test-build.mk: handle partial holes in a more generic manner

        * Makefile.in: m4 depends on libiberty

Mon Dec  7 06:43:27 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * config/mh-sco: don't default $(CC) to gcc

Thu Dec  3 21:52:11 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * configure.in: add m4, textutils, fileutils, sed, shellutils,
        time, wdiff, and find to configdirs

        * Makefile.in: all, clean, and install rules for the new programs
        added to configure.in

Mon Nov 30 14:54:34 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * configure.in: use mh-sun for all *-sun-* hosts

        * config/mh-solaris: rework standard X location to use
        $OPENWINHOME, if defined.

        * config/mh-sun: handle X11 include locations

        * config/mh-decstation: define NeedFunctionPrototypes to 0, to
        work around dain-bramaged DECwindows include files

Fri Nov 27 18:35:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * Makefile.in: define flags for X11 include files and library file
        locations, pass them down to the programs that need this info

        * build-all.mk: added a 'native' target, to 3stage the native toolchain

        * config/{mh-hpux,mh-solaris}: define the "standard" locations for
        the vendor supplied X11 headers and libraries

Sun Nov 22 18:59:13 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * configure.in: start building libg++ for HP-UX targets

Wed Nov 18 19:33:11 1992  John Gilmore  ([email protected])

        * README:  Update references to files moved into etc/.

Sun Nov 15 09:36:08 1992  Fred Fish  ([email protected])

        * config.sub (i386sol2, i486sol2):  i[34]86-unknown-solaris2.
        * configure.in (i[34]86-*-solaris2*):  Use config/mh-sysv4.

Thu Nov 12 08:50:42 1992  Ian Lance Taylor  ([email protected])

        * configure: accept dash as well as underscore in long option
        names for FSF compatibility.

Wed Nov 11 08:04:37 1992  Ian Lance Taylor  ([email protected])

        * config.sub: added -sco3.2v4 support from FSF.

Sun Nov  8 21:14:30 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * configure.in: expand the section that adds or removes
        directories from the list of programs to build, to handle native
        vs. cross in addition to host v. native

Sat Nov  7 18:52:27 1992  Per Bothner  ([email protected])

        * Makefile.in:  Replace C++ in macro names with CXX.
        This is less likely to break ...

Sat Nov  7 15:16:58 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * test-build.mk: add -w to GNU_MAKE

Fri Nov  6 23:10:37 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * config.sub: remove 'sparc'-->'sparc-sun' default transformation,
        add 'sparc' to list of recognized cpus.  This needed to make
        'sparc-aout' expand to 'sparc-unknown-aout' instead of 'sparc-sun-aout'.
        Delete some redundant ose68 variants.  Recognize -wrs as an os,
        then changes that into $CPU-wrs-vxworks.

        * configure.in: remove most references to gdbtest, regularize
        target based program removal

        * test-build.mk: import from p3 tree (many fixes and changes)

Fri Nov  6 20:59:00 1992  david d `zoo' zuhn  ([email protected])

        * Makefile.in: added rules to handle tcl, tk, and expect

        * configure.in: handle those directories if they exist

Thu Nov  5 14:35:41 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * config.sub: removed bogus hppabsd and hppahpux names, since
        "hppa" is not a valid cpu (hppa1.1 or hppa1.0 are, though)

Thu Oct 29 00:12:41 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * Makefile.in: all-gcc now depends on all-binutils.  all-libg++
        depends upon all-xiberty

        * Makefile.in: changes from p3, including:

        Thu Oct  8 15:00:17 1992  Ian Lance Taylor  ([email protected])

        * Makefile.in (XTRAFLAGS): include newlib directories if
        newlib/Makefile exists, rather than if host != target.

        Fri Sep 25 13:41:52 1992  Ian Lance Taylor  ([email protected])

        * Makefile.in: added -nostdinc to XTRAFLAGS if we are using gcc
        from the same source tree and not building a cross-compiler.  This
        matters for the libg++ configuration if reconfiguring a tree that
        has already been installed.

        Thu Sep 10 10:35:51 1992  Ian Lance Taylor  ([email protected])

        * Makefile.in: added -I for newlib/targ-include to XTRAFLAGS, to
        pick up the machine and system specific header files.

        * Makefile.in: added AS_FOR_TARGET, passed down in
        TARGET_FLAGS_TO_PASS.  Added CC_FOR_BUILD, which is intended to be
        the C compiler to use to create programs which are run in the
        build environment, set it to default to $(CC), and passed it down
        in FLAGS_TO_PASS and TARGET_FLAGS_TO_PASS.

        Mon Sep  7 22:34:42 1992  Ian Lance Taylor  ([email protected])

        * Makefile.in: add $(host) = $(target) tests back to *_FOR_TARGET.
        We need them for unusual native builds, like systems without
        ranlib.

        * configure: also define $(host_canonical) and
        $(target_canonical), which are the full, canonical names for the
        given host and target

Sun Nov  1 16:38:17 1992  Per Bothner  ([email protected])

        * Makefile.in:  Added separate definitions for C++.

Fri Oct 30 11:37:52 1992  Fred Fish  ([email protected])

        * configure.in (configdirs):  Add deja-gnu.

Fri Oct 23 00:39:18 1992  John Gilmore  ([email protected])

        * README:  Update for configure.texi and gdb-4.7 release.

Wed Oct 21 21:54:27 1992  John Gilmore  ([email protected])

        * Makefile.in:  Move "all" target to top of file.
        Previously, first target was ".PHONY" which caused BSD4.4 make
        to build .PHONY when make was run without arguments.

Mon Oct 19 01:17:54 1992  John Gilmore  ([email protected])

        * Makefile.in:  Add COPYING.LIB to GDB releases, now that there's
        Library-copylefted code in libiberty.

Tue Oct 13 01:22:32 1992  John Gilmore  ([email protected])

        * config.sub:  Replace m68kmote with plain old m68k.

Fri Oct  9 03:14:24 1992  John Gilmore  ([email protected])

        * Makefile.in:  Remove space from blank line, avoid Make complaints.

Thu Oct  8 18:41:45 1992  Ken Raeburn  ([email protected])

        * config.sub: Complain if no argument is given.  Added support for
        386bsd as OS and target alias.

Thu Oct  8 15:07:22 1992  Ian Lance Taylor  ([email protected])

        * Makefile.in (XTRAFLAGS): include newlib directories if
        newlib/Makefile exists, rather than if host != target.

Mon Oct  5 03:00:09 1992  Mark Eichin  (eichin at tweedledumber.cygnus.com)

        * config.sub: recognize sparclite-wrs-vxworks.

        * Makefile.in (install-xiberty): added *-xiberty make rules (from
        p3.) Added clean-xiberty to clean.

Thu Oct  1 17:59:19 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * configure.in: use *-*-* instead of nested cases for host and target

Tue Sep 29 14:11:18 1992  Ian Lance Taylor  ([email protected])

        * Makefile.in: added -nostdinc to XTRAFLAGS if we are using gcc
        from the same source tree and not building a cross-compiler.  This
        matters for the libg++ configuration if reconfiguring a tree that
        has already been installed.

Sep 20 08:53:10 1992  Fred Fish  ([email protected])

        * config.sub (i486v/i486v4):  Merge in from FSF version.

Fri Sep 18 00:32:00 1992  Mark Eichin  ([email protected])

        * configure: only set PWD if it is already set.

Thu Sep 17 23:05:53 1992  Mark Eichin  ([email protected])

        * configure: just set PWD=`pwd` at the top, since Ultrix sh
        doesn't have unset and all success paths (and most error paths)
        out set it anyway. (Note: should change all uses of ${PWD=`pwd`}
        to just ${PWD} to avoid confusion.)

Tue Sep 15 16:00:54 1992  Ian Lance Taylor  ([email protected])

        * configure: always set $(tooldir) to $(libdir)/$(target_alias),
        even for a native compilation.

Tue Sep 15 02:22:56 1992  John Gilmore  ([email protected])

        Changes to make the gdb.tar.Z rule work better.

        * Makefile.in (GDB_SUPPORT_DIRS):  Add opcodes.
        (DEVO_SUPPORT):  Add configure.texi.
        (bfd-ilrt.tar.Z):  Remove ancient rule.

Thu Sep 10 10:43:19 1992  Ian Lance Taylor  ([email protected])

        * Makefile.in: added -I for newlib/targ-include to XTRAFLAGS, to
        pick up the machine and system specific header files.

        * configure.in, config.sub: added new target m68010-adobe-scout,
        with alias of adobe68k.  Changed configure.in to check for
        -scout before -sco* to avoid a false match.

        * Makefile.in: added AS_FOR_TARGET, passed down in
        TARGET_FLAGS_TO_PASS.  Added CC_FOR_BUILD, which is intended to be
        the C compiler to use to create programs which are run in the
        build environment, set it to default to $(CC), and passed it down
        in FLAGS_TO_PASS and TARGET_FLAGS_TO_PASS.

Wed Sep  9 12:21:42 1992  Ian Lance Taylor  ([email protected])

        * Makefile.in: added TARGET_FLAGS_TO_PASS, CC_FOR_TARGET,
        AR_FOR_TARGET, RANLIB_FOR_TARGET, NM_FOR_TARGET.  Pass
        TARGET_FLAGS_TO_PASS, which defines CC, AR, RANLIB and NM as the
        FOR_TARGET variants, to newlib and libg++.

Tue Sep  8 17:28:30 1992  Ken Raeburn  ([email protected])

        * Makefile.in (all-gas, all-gdb): Require all-opcodes to be built
        first.

Wed Sep  2 02:50:05 1992  John Gilmore  ([email protected])

        * config.sub:  Accept `elf' as an environment.

Tue Sep  1 15:48:30 1992  Steve Chamberlain  ([email protected])

        * Makefile.in (all-opcodes):  cd into the right directory

Sun Aug 30 21:12:11 1992  Ian Lance Taylor  ([email protected])

        * configure: added -program_transform_name option, used as
        argument to sed when installing programs.
        configure.texi: added documentation for -program_prefix,
        -program_suffix and -program_transform_name.

Thu Aug 27 21:59:44 1992  John Gilmore  ([email protected])

        * config.sub:  Accept i486 where i386 ok.

Thu Aug 27 13:04:42 1992  Brendan Kehoe  ([email protected])

        * config.sub: accept we32k

Mon Aug 24 14:05:14 1992  Ian Lance Taylor  ([email protected])

        * config.sub, configure.in: accept OSE68000 and OSE68k.

        * Makefile.in: don't create all directories for ``make install'';
        let the subdirectories create the ones they need.

Tue Aug 11 23:13:17 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * COPYING: new file, GPL v2

Tue Aug  4 01:12:43 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * Makefile.in: use the new gen-info-dir, which needs a template
        argument (which also lives in texinfo)

        * configure.texi, standards.texi: fix INFO-DIR-ENTRY

Mon Aug  3 15:41:28 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * config/mh-solaris: removed the -xs from CFLAGS (let the people
        with Sun's C compiler deal with it themselved)

Mon Aug  3 00:34:17 1992  Fred Fish  ([email protected])

        * config.sub (ncr3000):  Change i386 to i486.

Thu Jul 23 00:12:17 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * Makefile.in: add install-rcs, install-grep to
        install-no-fixedincludes, removed install-bison and install-libgcc

Tue Jul 21 01:01:50 1992  david d `zoo' zuhn ([email protected])

        * configure.in: grab the HPUX makefile fragment if on HPUX

Mon Jul 20 11:02:09 1992  D. V. Henkel-Wallace  ([email protected])

        * Makefile.in: eradicate bison spoor (ditto libgcc).
         configure.in: recognise m68{k,000}-ericsson-OSE.
         es1800 is alias for m68k-ericsson-OSE

Sun Jul 19 17:49:02 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * configure.in: rearrange the parts that remove programs from
        configdirs, based now on HOST==TARGET or by canonical triple.

Fri Jul 17 22:52:49 1992  K. Richard Pixley  ([email protected])

        * test-build.mk: recurse explicitly with -f test-build.mk when
          appropriate.  predicate stage3 and comparison on the existence
          of gcc.  That is, if gcc isn't around, we aren't three-staging.
          On very clean, also remove ...stamp-co.  Build in-place before
          doing other builds.

Thu Jul 16 18:33:09 1992  Steve Chamberlain  ([email protected])

        * Makefile.in, configure.in: add tgas

Thu Jul 16 16:05:28 1992  K. Richard Pixley  ([email protected])

        * Makefile.in: a number of changes merged in from progressive.

        * configure.in: add libm.

        * .cvsignore: ignore some stuff that comes from test-build.mk.

Wed Jul  8 00:01:30 1992  Stu Grossman  (grossman at cygnus.com)

        * config/mh-solaris:  Use -xs when compiling so that Sun-C puts
        a symbol-table into the executable.

Tue Jul  7 00:24:52 1992  Fred Fish  ([email protected])

        * config.sub:  Add es1800 (m68k-ericsson-es1800).

Tue Jun 30 20:24:41 1992  D. V. Henkel-Wallace  ([email protected])

        * configure: Add program_suffix (parallel to program_prefix)
        * Makefile.in: adjust directory-creating script for losing decstation

Mon Jun 22 23:43:48 1992  Per Bothner  ([email protected])

        * configure:  Minor $subdir-related fixes.

Mon Jun 22 18:30:26 1992  Steve Chamberlain  ([email protected])

        * configure: fix various problems with propogating
        makefile_target_frag in subdirs.
        * configure.in: config libgcc if its there

Fri Jun 19 15:19:40 1992  Stu Grossman  (grossman at cygnus.com)

        * config.sub:  HPPA merge.

Mon Jun 15 12:31:52 1992  Fred Fish  ([email protected])

        * config/mh-ncr3000 (INSTALL):  Don't use /usr/ucb/install,
        it is broken on ncr 3000's.

Sun Jun 14 10:29:19 1992  John Gilmore  (gnu at cygnus.com)

        * Makefile.in:  Replace all-bison with all-byacc in all
        dependency lines for other tools (which now use byacc).

Fri Jun 12 22:21:57 1992  John Gilmore  (gnu at cygnus.com)

        * config.sub:  Add sun4sol2 => sparc-sun-solaris2.

Tue Jun  9 17:18:11 1992  Fred Fish  (fnf at cygnus.com)

        * config/{mh-ncr3000, mh-sysv4}:  Add INSTALL.

Thu Jun  4 12:07:32 1992  Mark Eichin  ([email protected])

        * Makefile.in: make gprof rules similar to byacc rules (instead of
        vestigal $(unsubdir) that didn't work...)

Thu Jun  4 00:37:05 1992  Per Bothner  ([email protected])

        * config.sub:  Add support for Linux.
        * Makefile.in:  Use $(FLAGS_TO_PASS) more consistently
        (at least for libg++).

Tue Jun 02 20:03:00 1992  david d `zoo' zuhn ([email protected])

        * configure.texi: fix doc for the -nfp option to configure

Tue Jun  2 17:20:52 1992  Michael Tiemann  ([email protected])

        * Makefile.in (all-binutils): ar needs flex, so depend on all-flex.

Sun May 31 15:04:08 1992  Mark Eichin  (eichin at cygnus.com)

        * config.sub: changed [^-]+ to [^-][^-]* so that it works under
        Sun sed. (BSD 4.3 sed doesn't handle [^-]+ either.)
        * configure.in: added solaris* host_makefile_frag hook.

Sun May 31 01:10:34 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * config.sub: changed recognition of m68000 so that various
        m68k types can be specified via m680[01234]0

Sat May 30 21:01:06 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * config.sub (basic_machine): fix sed so that '-foo' isn't
        completely substituted out while .+'-foo' loses the '-foo'

Wed May 27 23:18:52 1992  Michael Tiemann  ([email protected])

        * config.sub ($os): Add -aout.

Fri May 22 14:00:02 1992  Per Bothner  ([email protected])

        * configure:  If host_makefile_frag is absolute, don't
        prefix ${invsubdir} (relevant to libg++ auto-configure).

Thu May 21 18:00:09 1992  Michael Tiemann  ([email protected])

        * Makefile.in (tooldir): Define it.
        (all-ld): Depend on all-flex.

Sun May 10 21:45:59 1992  Per Bothner  ([email protected])

        * Makefile.in (check):  Fix libg++ special case.

Fri May  8 08:31:41 1992  K. Richard Pixley  ([email protected])

        * configure: do not bury `pwd` into config.status, thus do fewer
          pwd's.

        * configure: print the "Building in" message only when building in
          other than "." AND verbose.

        * configure: remove -s, rework -v to better accomodate guested
          configures.

        * standards.texi: updated to 3 may, fixed librid <-> libdir typo.

Fri May  1 18:00:50 1992  K. Richard Pixley  ([email protected])

        * Makefile.in: macroize flags passed on recursion.  remove
          fileutils.

Thu Apr 30 08:56:20 1992  K. Richard Pixley  ([email protected])

        * configure: get makesrcdir right for subdirs deeper than 1.

        * Makefile.in: pass INSTALL, INSTALL_DATA, INSTALL_PROGRAM on
          install.

Fri Apr 24 15:51:51 1992  K. Richard Pixley  ([email protected])

        * Makefile.in: don't print subdir_do or recursion lines.

Fri Apr 24 15:22:04 1992  K. Richard Pixley  ([email protected])

        * standards.texi: added menu item.

        * Makefile.in: build and install standards.info.

        * standards.texi: new file.

Wed Apr 22 18:06:55 1992  K. Richard Pixley  ([email protected])

        * configure: test for and move config.status pieces from
          ${subdir}/.

Wed Apr 22 14:38:34 1992  Fred Fish  ([email protected])

        * config/mh-delta88, config/mh-ncr3000:  Replace MINUS_G with
        CFLAGS per new configuration strategy.
        * configure:  Test for existance of files before trying to mv
        them, to avoid numerous non-existance messages.

Tue Apr 21 12:31:33 1992  K. Richard Pixley  ([email protected])

        * configure: correct final line of config.status.

        * configure: patch from eggert.  Avoids a protection problem if
          the original Makefile.in is read only.

        * configure: use move-if-change from gcc to create config.status.
          Some makefiles depend on config.status to tell if a directory
          has been reconfigured for a different host.  This change
          prevents those directories from remaking everything in the case
          where the reconfig was only intended to rebuild a Makefile.

        * configure: test for config.sub with "config.sub sun4" rather
          than "config.sub ${host_alias}".  Otherwise we can't tell a bad
          host alias from a missing config.sub.

Mon Apr 20 18:16:36 1992  K. Richard Pixley  ([email protected])

        * Makefile.in: explicitly pass CFLAGS on recursion. no longer pass
          MINUS_G (this can be done with CFLAGS).  Default CFLAGS to -g.

Fri Apr 17 18:27:51 1992  Per Bothner  ([email protected])

        * configure: mkdir ${subdir} as needed.

Wed Apr 15 17:37:22 1992  K. Richard Pixley  ([email protected])

        * Makefile.in,configure.in: added autoconf.

Wed Apr 15 17:27:34 1992  K. Richard Pixley  ([email protected])

        * Makefile.in: no longer pass against on recursion.

        * Makefile.in: added .NOEXPORT: so that stray makefile_frag
          definitions are not inherited.

        * configure: correct makesrcdir when subdir is .

Tue Apr 14 11:56:09 1992  Per Bothner  ([email protected])

        * configure:  Add support for 'subdirs' variable, which is
        like 'configdirs', except that configure doesn't re-invoke
        itself for subdirs, it just creates a Makefile for each subdir.
        * configure.texi:  Document subdirs.

Mon Apr 13 18:50:16 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * configure.in: added flex to configdirs

Mon Apr 13 18:43:55 1992  K. Richard Pixley  ([email protected])

        * Makefile.in: remove clean-stamps from clean.

Sat Apr 11 03:52:03 1992  John Gilmore  (gnu at cygnus.com)

        * configure.in:  Add gdbtest to configdirs.

Fri Apr 10 23:11:49 1992  Fred Fish  ([email protected])

        * Makefile.in (MINUS_G):  Add macro, default to -g, pass on
        to recursive makes.
        * configure.in:  Recognize new ncr3000 config.

Wed Apr  8 23:08:12 1992  K. Richard Pixley  ([email protected])

        * Makefile.in, configure.in: removed references to gdbm.

Tue Apr  7 16:48:20 1992  Per Bothner  ([email protected])

        * config.sub:  Don't canonicalize os value
        newsos* to bsd (readline needs to check for newsos).
        (This fix was earlier made Jan 31, but got re-broken.)

Mon Apr  6 14:34:08 1992  Stu Grossman  (grossman at cygnus.com)

        * configure.in:  sco is an os, not a vendor!

        * configure:  Quote $( better.  Keep various shells happy.

Tue Mar 31 16:32:57 1992  K. Richard Pixley  ([email protected])

        * Makefile.in: eliminate stamp-files.

Mon Mar 30 22:20:23 1992  K. Richard Pixley  ([email protected])

        * Makefile.in: add send_pr.  remove "force" from .stmp-gprof rule.
          Supress echoing of all the "if [ -d ... $(MAKE)" lines.

Wed Mar 25 15:20:04 1992  Stu Grossman  ([email protected])

        * config.sub:  fix iris/iris3.

Wed Mar 25 10:34:19 1992  K. Richard Pixley  ([email protected])

        * configure: re-add -rm.

Tue Mar 24 23:50:16 1992  K. Richard Pixley  ([email protected])

        * Maskefile.in: add .stmp-rcs to all.

        * configure.in: remove gas from rs6000 build, use aix host fragment.

Mon Mar 23 19:43:35 1992  K. Richard Pixley  ([email protected])

        * configure: pass down site_option during recursion.

Thu Mar 19 16:49:36 1992  Stu Grossman  (grossman at cygnus.com)

        * Makefile.in (all.cross):  Add .stmp-bfd .stmp-readline.

Wed Mar 18 15:29:33 1992  Mike Stump  ([email protected])

        * configure: Change exec_prefix so that it really defaults to prefix.

Sat Mar 14 17:20:38 1992  Fred Fish  ([email protected])

        * Makefile.in, configure.in:  Add support for mmalloc library.

Fri Mar 13 18:44:18 1992  K. Richard Pixley  ([email protected])

        * Makefile.in: add stmp dependencies for a few more things.

Thu Mar 12 04:56:24 1992  K. Richard Pixley  ([email protected])

        * configure: adjusted error message on objdir/srcdir configure
          collision, per john's suggestion.

        * Makefile.in: add libiberty stmp to all and all.cross.

Wed Mar 11 02:07:52 1992  K. Richard Pixley  ([email protected])

        * Makefile.in: remove force dependencies, add grep to all.

Tue Mar 10 21:49:18 1992  K. Richard Pixley  ([email protected])

        * Makefile.in: drop flex.  make stamp files work.

        * configure: added test for conflicting configuration in srcdir,
          remove trailing slashes from srcdir.  Otherwise emacs gdb mode
          gets cranky.  use relative paths for configure and srcdir
          whenever possible.  Send some error messages to stderr that were
          going to stdout.

Tue Mar 10 18:01:55 1992  Per Bothner  ([email protected])

        * Makefile.in:  Fix libg++ rule to check for gcc directory
        before using gcc/gcc.  Also pass XTRAFLAGS.

Thu Mar  5 21:45:07 1992  K. Richard Pixley  (rich@sendai)

        * Makefile.in: added stmp-files so that directories aren't polled
          when they are already built.

        * configure.texi: fixed a node pointer problem.

Thu Mar  5 12:05:58 1992  Stu Grossman  (grossman at cygnus.com)

        * config.sub configure.in config/mh-irix4 gdb/configure.in
        gdb/mips-tdep.c gdb/mipsread.c gdb/procfs.c gdb/signame.h
        gdb/tm-irix3.h gdb/tm-mips.h gdb/xm-irix4.h gdb/config/mt-irix3
        gdb/config/mh-irix4 texinfo/configure.in:  Port to SGI Irix-4.x.

Wed Mar  4 02:57:46 1992  K. Richard Pixley  ([email protected])

        * configure: -recurring becomes -silent.  corrected help message
          for -site= option.

        * Makefile.in: mkdir $(exec_prefix) and $(tooldir).

Tue Mar  3 14:51:21 1992  K. Richard Pixley  ([email protected])

        * configure: when building Makefile for crosses, replace
          tooldir and program_prefix.  default srcdir from location of
          config.sub.  remove "for host in hosts" and "for target in
          targets" loops.

Wed Feb 26 19:48:25 1992  K. Richard Pixley  ([email protected])

        * Makefile.in: Do not pass bindir or mandir to cvs.

Wed Feb 26 18:04:40 1992  K. Richard Pixley  ([email protected])

        * Makefile.in, configure.in: removed traces of namesubdir,
          -subdirs, $(subdir), $(unsubdir), some rcs triggers.  Forced
          copyrights to '92, changed some from Cygnus to FSF.

        * configure.texi: remove most references to multiple hosts,
          multiple targets, subdirs, etc.

        * configure.man: removed rcsid. reference config.sub not
          config.subr.

        * Makefile.in: mkdir $(infodir) on install-info.

Wed Feb 19 15:41:13 1992  John Gilmore  (gnu at cygnus.com)

        * configure.texi:  Explain better about .gdbinit and about
        the environment that configure.in sections run in.

Fri Feb  7 07:55:00 1992  John Gilmore  (gnu at cygnus.com)

        * configure.in:  Ultrix is only a decstation if it's a MIPS.

Fri Jan 31 21:54:51 1992  John Gilmore  (gnu at cygnus.com)

        * README:  DOC.configure => cfg-paper.texi.

Fri Jan 31 21:48:18 1992  Stu Grossman  (grossman at cygnus.com)

        * config.sub (near case $os):  Don't convert newsos* to bsd!

Fri Jan 31 02:27:32 1992  John Gilmore  (gnu at cygnus.com)

        * Makefile.in:  Reinstall change from gdb-4.3 that reduces
        the number of copies of COPYING that go into the GDB tar file.

Thu Jan 30 16:17:30 1992  Stu Grossman  (grossman at cygnus.com)

        * bfd/configure.in, config/mh-sco, gdb/config/mh-i386sco,
        gdb/config/mt-i386v32, gdb/configure.in, readline/configure.in:
        Fix SCO configuration stuff.

Tue Jan 28 23:51:07 1992  Per Bothner  (bothner at cygnus.com)

        * Makefile.in:  For libg++, make sure the -I pointing
        to the gcc directory goes *after* all the libg++-local -I flags.
        Also, move just-gcc dependency from just-libg++ to all-libg++.

Tue Jan 28 12:56:24 1992  Stu Grossman  (grossman at cygnus.com)

        * configure:  Change -x to -f to keep Ultrix /bin/test happy.

Sat Jan 18 17:45:11 1992  Stu Grossman  (grossman at cygnus.com)

        * Makefile.in (make-gdb.tar.Z):  Remove texinfo targets.

Sat Jan 18 17:03:21 1992  Fred Fish  (fnf at cygnus.com)

        * config.sub:  Add stratus configuration frags.  Also
        submitted to FSF.

Sat Jan 18 15:35:29 1992  Stu Grossman  (grossman at cygnus.com)

        * Makefile.in (DEV_SUPPORT):  add configure.man.

        * config.sub(Decode manufacturer-specific):  add -none*.

Fri Jan 17 17:58:05 1992  Stu Grossman  (grossman at cygnus.com)

        * Makefile.in:  remove form feeds to make Sun's make happy.
        (DEVO_SUPPORT):  DOC.configure => cfg-paper.texi.

Sat Jan  4 16:11:44 1992  John Gilmore  (gnu at cygnus.com)

        * Makefile.in (AR_FLAGS):  Make quieter.

Thu Jan  2 22:57:12 1992  John Gilmore  (gnu at cygnus.com)

        * configure.in:  Add libg++.
        * configure:  When verbose, don't output the command line at each
        level; it will be unremarkably the same as the previous version,
        which will be the same as what the user typed.

Fri Dec 27 16:26:47 1991  K. Richard Pixley  (rich at cygnus.com)

        * configure.in, Makefile.in: fix clean-info, add flex.  add
          fileutils.

        * configure: be less sensitive to spaces in Makefile.in.  Do not
          look for sources in "..".  Doing so breaks subdirectories that
          might have their own configure.  If a subdir has it's own
          configure script, use it.

Thu Dec 26 16:30:26 1991  K. Richard Pixley  (rich at cygnus.com)

        * cfg-paper.texi: some changes suggested by rms.

Thu Dec 26 10:13:36 1991  Fred Fish  (fnf at cygnus.com)

        * config.sub:  Merge in some small additions from the FSF version,
        taken from the gcc distribution, to bring the Cygnus and FSF
        versions into closer sync.

Fri Dec 20 11:34:18 1991  Fred Fish  (fnf at cygnus.com)

        * configure.in:  Changed svr4 references to sysv4.

Thu Dec 19 15:54:29 1991  K. Richard Pixley  (rich at cygnus.com)

        * configure: added -V for version number option.

Wed Dec 18 15:39:34 1991  K. Richard Pixley  (rich at cygnus.com)

        * DOC.configure, cfg-paper.texi: revised, updated, and texinfo'd.
          renamed from DOC.configure to cfg-paper.texi.

Mon Dec 16 23:05:19 1991  K. Richard Pixley  (rich at rtl.cygnus.com)

        * configure, config.subr, config.sub: config.subr is now
          config.sub again.

Fri Dec 13 01:17:06 1991  K. Richard Pixley  (rich at cygnus.com)

        * configure.texi: new file, in progress.

        * Makefile.in: build info file and install the man page for
          configure.

        * configure.man: new file, first cut.

        * configure: find config.subr again now that configuration "none"
          has gone.  removed all traces of the -ansi option.  removed all
          traces of the -languages option.

        * config.subr: resync from rms.

Wed Dec 11 22:25:20 1991  K. Richard Pixley  (rich at rtl.cygnus.com)

        * configure, config.sub, config.subr: merge config.sub into
          config.subr, call the result config.subr, remove config.sub, use
          config.subr.

        * Makefile.in: revised install for dir.info.

Tue Dec 10 00:04:35 1991  K. Richard Pixley  (rich at rtl.cygnus.com)

        * configure.in: add decstation host makefile frag.

        * Makefile.in: BISON now bison -y again.  also install-gcc on
          install.  clean-gdbm on clean.  infodir belongs in datadir.
          Make directories for info install.  Build dir.info here then
          install it.

Mon Dec  9 16:48:33 1991  K. Richard Pixley  (rich at rtl.cygnus.com)

        * Makefile.in: fix for bad directory tests.

Sat Dec  7 00:17:01 1991  K. Richard Pixley  (rich at rtl.cygnus.com)

        * configure: \{1,2\} appears to be a sysv'ism.  Use a different
          regexp.  -srcdir relative was being handled incorrectly.

        * Makefile.in: unwrapped some for loops so that parallel makes
          work again and so one can focus one's attention on a particular
          package.

Fri Dec  6 00:22:08 1991  K. Richard Pixley  (rich at rtl.cygnus.com)

        * configure: added PWD as a stand in for `pwd` (for speed). use
          elif wherever possible.  make -srcdir work without -objdir.
          -objdir= commented out.

Thu Dec  5 22:46:52 1991  K. Richard Pixley  (rich at rtl.cygnus.com)

        * configure: +options become --options.  -subdirs commented out.
          added -host, -datadir.  Renamed -destdir to -prefix.  Comment in
          Makefile now at top of generated Makefile.  Removed cvs log
          entries.  added -srcdir.  create .gdbinit only if there is one
          in ${srcdir}.

        * Makefile.in: idestdir and ddestdir go away.  Added copyrights
          and shift gpl to v2.  Added ChangeLog if it didn't exist. docdir
          and mandir now keyed off datadir by default.

Fri Nov 22 07:38:11 1991  K. Richard Pixley  (rich at rtl.cygnus.com)

        * Freshly created ChangeLog.

\f
Local Variables:
mode: change-log
left-margin: 8
fill-column: 76
version-control: never
End: