3 * configure.in: configure sim before gdb for win32-x-ppc
7 Move gperf into the toplevel, from libg++.
8 * configure.in (target_tools): Add target-gperf.
9 (native_only): Add target-gperf.
10 * Makefile.in (all-target-gperf): New target, depend on
12 (configure-target-gperf): Empty rule.
13 (ALL_TARGET_MODULES): Add all-target-gperf.
14 (CONFIGURE_TARGET_MODULES): Add configure-target-gperf.
15 (CHECK_TARGET_MODULES): Add check-target-gperf.
16 (INSTALL_TARGET_MODULES): Add install-target-gperf.
17 (CLEAN_TARGET_MODULES): Add clean-target-gperf.
21 * config.sub (mn10200): Recognize new basic machine.
25 * configure.in: Don't set ENABLE_MULTILIB, so we'll be passing
26 --enable-multilib down to subdirs; setting TARGET_SUBDIR was enough.
30 * configure.in: If we're building mips-sgi-irix6* native, turn on
31 ENABLE_MULTILIB and set TARGET_SUBDIR.
35 * Makefile.in (all-sn): Depend on all-grep.
39 * configure.in: Use mh-ppcpic and mt-ppcpic for powerpc*-* targets.
41 * configure: Set CFLAGS and CXXFLAGS, and substitute them into
43 * Makefile.in: Add comment for CFLAGS and CXXFLAGS.
45 * Makefile.in (DISTBISONFILES): Remove.
46 (taz): Don't futz with DISTBISONFILES. Change BISON to use
49 * configure.in: Build itl, db, sn, etc., when building for native
52 * Makefile.in (LD): New variable.
53 (EXTRA_HOST_FLAGS): Pass down LD.
58 * Makefile.in (INSTALL): Use $(SHELL) when executing install-sh.
62 * configure.in (targargs): Strip out any supplied --build argument
63 before adding our own. Always add --build.
67 * configure.in (targargs): Pass --build if we're doing
72 * configure: Use '|' instead of ":" as the seperator in
73 sed. Otherwise sed chokes on NT path names with drive
74 designators. Also look for "?:*" as the leading characters in an
79 * config.sub: Support for r3900.
83 * configure.in: Use install-sh, not install.sh.
87 * Makefile.in (taz): Improve check for BISON so it doesn't try to
92 * Makefile.in (INSTALL_MODULES): Put install-opcodes before
97 * Makefile.in: Add automake targets.
98 * configure.in (host_tools): Add automake.
103 * Makefile.in (all-libide): Depend upon all-ilu.
108 * configure: Default CXX to c++, not gcc.
109 * Makefile.in (CXX): Set to c++, not gcc.
110 (CXX_FOR_TARGET): When cross, transform c++, not gcc.
115 * Makefile.in: Add ILU targets.
116 * configure.in (host_tools): Add ILU.
121 * install-sh: try appending a .exe if source file doesn't
126 * configure.in: Turn on multilib by default.
127 (cross_only): Remove target-libiberty.
129 * Makefile.in (all-gcc): Don't depend on libiberty.
134 * configure.in (host_tools): Added vmake.
139 * config.guess: improve algorithm for recognizing Gnu Hurd x86.
143 * Makefile.in (DEVO_SUPPORT): Add mpw-install.
144 (DISTBISONFILES): Add ld/Makefile.in
148 * configure.in: if target is cygwin32 but host isn't cygwin32,
149 don't configure gdb tcl tk expect, not just gdb.
153 * configure.in: Added gnuserv everywhere sn appears.
155 * Makefile.in (ALL_MODULES): Added all-gnuserv.
156 (CROSS_CHECK_MODULES): Added check-gnuserv.
157 (INSTALL_MODULES): Added install-gnuserv.
158 (CLEAN_MODULES): Added clean-gnuserv.
159 (all-gnuserv): New target.
164 * configure.in (host_libs): Added libide.
165 Skip libide, vmake if no X. Also skip these everywhere that sn is
168 * Makefile.in (ALL_MODULES): Added all-vmake, all-libide.
169 (CROSS_CHECK_MODULES): Added check-vmake, check-libide.
170 (INSTALL_MODULES): Added install-vmake, install-libide.
171 (CLEAN_MODULES): Added clean-vmake, clean-libide.
172 (all-vmake, all-libide): New targets.
177 * config.guess: Fixes for MIPS OpenBSD systems.
181 * Makefile.in (INSTALL_XFORM): Remove.
182 (BASE_FLAGS_TO_PASS): Remove INSTALL_XFORM.
184 * mkinstalldirs: New file, copied from automake.
185 * Makefile.in (installdirs): Rename from install-dirs. Use
186 mkinstalldirs. Change all users.
187 (DEVO_SUPPORT): Add mkinstalldirs.
191 * install-sh: Rename from install.sh.
192 * Makefile.in (INSTALL): Change install.sh to install-sh.
193 (DEVO_SUPPORT): Likewise.
195 * configure: Use ${config_shell} with ${moveifchange}. From Thomas
200 * config.guess: Recognize OpenBSD systems correctly.
204 * README, Makefile.in (ETC_SUPPORT): Remove references to
205 cfg-paper*, configure.{texi,man,info*}._
209 * Makefile.in (all.normal): Ensure that gcc is built after all
210 the x11 - ie gdb - targets.
214 * makefile.vms: Don't run conf-a-gas.
218 * configure.in (hppa1.1-*-rtems*): New target, like hppa-*-*elf*.
223 * configure.in: Remove noconfigdirs case since gdb also
224 configures and builds for tic80-coff.
229 * configure: Set cache_file to config.cache.
230 * Makefile.in (local-distclean): Remove config.cache.
234 * COPYING: Update FSF address.
239 * configure.in (tic80-*-*): Remove G++ libraries and libgloss from
245 * Makefile.in (install-dirs): Don't crash if prefix, and hence
250 * config.sub: Tweak mn10300 entry.
254 * configure.in (host_tools): Put sim before gdb, so gdb's
255 configure.tgt can determine if the simulator was configured.
259 * config.sub: Move BeOS $os case to be with other Cygnus
264 * config.sub: Remove misplaced comment that broke Linux.
268 * config.sub: Add BeOS support.
272 * Makefile.in (CHECK_X11_MODULES): Don't run check-tk.
276 * configure.in (noconfigdirs): Remove tcl and tk from
277 noconfigdirs for cygwin32 builds.
282 * configure.in (tic80-*-*): Remove ld from noconfigdirs.
287 * Makefile.in (GAS_SUPPORT_DIRS, BINUTILS_SUPPORT_DIRS): Remove
288 make-all.com, use makefile.vms instead.
292 * config.sub: Accept -lnews*.
297 * configure.in (noconfigdirs): Disable target-newlib,
298 target-examples and target-libiberty for d30v.
304 * configure.in (host_libs): Build itcl after tcl, tk.
306 * configure.in (host_libs): Added db, itcl.
307 (host_tools): Added sn.
308 (noconfigdirs): Added itcl, db, sn in appropriate places.
309 (native_only): Added sn.
311 * Makefile.in (all-db, all-sn): New targets.
312 (ALL_MODULES): Added all-sn.
313 (CROSS_CHECK_MODULES): Added check-sn.
314 (INSTALL_MODULES): Added install-sn.
315 (CLEAN_MODULES): Added clean-sn.
321 * configure.in (noconfigdirs): Enable ld for d30v.
327 * configure.in (tic80-*-*): Build compiler.
333 * configure.in (d30v-*): Remove sim directory from list of
334 unsupported d30v directories
340 * config.sub, configure.in: Add d30v target cpu.
345 * makefile.vms: New file.
346 * make-all.com: Remove.
350 * Makefile.in (EXTRA_GCC_FLAGS): Add LIBGCC2_DEBUG_CFLAGS.
355 * config.sub, configure.in: add r5900
360 * Makefile.in (all-itcl): The rule is all-itcl, not all-tcl.
364 * Makefile.in (ALL_MODULES): Added all-db.
365 (CROSS_CHECK_MODULES): Addec check-db.
366 (INSTALL_MODULES): Added install-db.
367 (CLEAN_MODULES): Added clean-db.
371 * config.guess: Merge with latest FSF sources.
375 * Makefile.in (ALL_MODULES): Added all-itcl.
376 (CROSS_CHECK_MODULES): Added check-itcl.
377 (INSTALL_MODULES): Added install-itcl.
378 (CLEAN_MODULES): Added clean-itcl.
382 * configure.in: build gdb for mn10200
386 * Makefile.in (all-target-winsup): Depend on all-target-libio.
391 * configure.in (tic80-*-*): Turn off most targets right now.
396 * Makefile.in (MAKEINFO): Check for the existence of the Makefile,
397 rather than the makeinfo program.
398 (do-info): Depend upon all-texinfo.
402 * configure.in: Remove uses of config/mh-linux.
404 * config.sub, config.guess: Merge with latest FSF sources.
409 * config.sub (case $basic_machine): Add tic80 entries.
414 * config.sub, config.guess: Merge with latest FSF sources.
418 * mpw-build.in: Build ld before gcc, use NewFolderRecursive.
419 * mpw-config.in: Test for NewFolderRecursive.
420 * mpw-install: Use symbolic name for startup filename.
421 * mpw-README: Add various additional details.
425 * configure.in (mips*-sgi-irix6*): Remove binutils from noconfigdirs.
429 * configure.in: Do build gcc and the target libraries for
434 * configure.in: don't avoid building gdb for mn10300 any more
435 * Makefile.in: double-quote GCC_FOR_TARGET line in EXTRA_GCC_FLAGS
436 instead of single-quoting it.
440 * configure.in: Don't use --with-stabs on IRIX 6.
444 * configure.in (m32r): Build gdb, libg++ now.
448 * configure.in (mips*-sgi-irix6*): Remove gdb and related
449 directories from noconfigdirs.
453 * config.sub (basic_machine): added mips16 configuration
457 * config.sub: Handle d10v-unknown.
462 * gcc/depragmaize.c: Handle MSDOS's (non-unix) text files.
466 * config.sub: Handle v850-unknown.
471 * Makefile.in: add findutils
472 * configure.in: add findutils to list of host_tools
476 * config.sub: Handle mn10200 and mn10300.
480 * configure.in (d10v-*): Do not build librx.
484 * configure.in (mn10300): Build everything except gdb & libgloss.
488 * config.guess: Patch for Dansk Data Elektronik servers,
491 For ncr, use /bin/uname rather than uname, since GNU uname does not
494 Patch for MIPS R4000 running System V,
497 Fix thinko for nextstep.
502 * config.guess: Guess mips-dec-mach_bsd4.3.
505 * config.guess (i?86-ncr-sysv*): Emit just enough of the minor
507 * config.guess (mips-mips-riscos*): Emit just enough of the
511 * config.guess (sparc-auspex-sunos*): Added.
512 (f300-fujitsu-*): Added.
515 * config.guess: Recognize a Tadpole as a sparc.
519 * config.guess: Don't assume that NextStep version is either 2 or
520 3. NextStep 4 (aka OpenStep 4) has come out now.
524 * config.guess: Support Cray T90 that reports itself as "CRAY TS".
529 * config.sub: Contributions from bug-gnu-utils to:
530 Support plain "hppa" (no version given) architecture, reported by
533 LynxOs is not a hardware supplier.
535 * config.guess: Contributions from bug-gnu-utils to add support for:
538 More Pyramid systems.
539 i[n>4]86 Intel chips.
540 M680[n>4]0 Motorola chips.
541 Use unknown instead of lynx for hardware manufacturer.
545 * install.sh (chmodcmd): Set to null if the DST directory already
550 * configure.in (powerpc*-{eabi,elf,linux,rtem,sysv,solaris}*): Do
551 not use mt-ppc target Makefile fragment any more.
555 * configure.in (*-*-windows): Exclude everything but those dirs
556 needed to build windows.
560 * Makefile.in (all-target-winsup): Depend on all-target-librx.
564 * configure.in: Exclude mmalloc from i386-windows.
565 * config/mh-windows: Add rules for building MSVC makefiles.
569 * Undo my previous change.
573 * Makefile.in (EXTRA_GCC_FLAGS): Pass down GCC_FOR_TARGET
575 (MAKEOVERRIDES): Define (revert this part of October 18 change).
579 * Makefile.in (FLAGS_TO_PASS): Add $(HOST_FLAGS) to allow the
580 host to add it's own flags.
581 * config/mh-windows (HOST_FLAGS): Set srcroot, which is needed
582 for MSVC build procedure.
586 * configure: Handle GCC_FOR_TARGET like CC_FOR_TARGET.
590 * Makefile.in (CC_FOR_TARGET): Check for xgcc, not Makefile.
591 (CXX_FOR_TARGET): Likewise.
592 (GCC_FOR_TARGET): Define.
593 (BASE_FLAGS_TO_PASS): Remove GCC_FOR_TARGET.
594 (EXTRA_GCC_FLAGS): Define GCC_FOR_TARGET based on whether
595 CC_FOR_TARGET was specified on the command line.
596 (MAKEOVERRIDES): Don't define.
600 * configure.in (m32r): Fix spelling of libg++ libs.
604 * config.sub (-apple*): Remove, now redundant.
608 * configure: Don't get confused by CPU-VENDOR-linux-gnu.
610 * configure: Rework yesterday's sed script patch.
612 * config.sub: Merge with FSF.
616 * config.guess: Merge from FSF.
619 * config.guess: Use pc instead of unknown, for pc clone systems.
620 Change linux to linux-gnu.
623 * config.guess: Avoid non-portable tr syntax.
627 * test-build.mk (HOLES): Add "xargs" for gdb.
629 * configure: Avoid hpux10.20 sed bug.
633 * configure.in config/mh-windows: Add support for windows host
634 (that is a build done under the Microsoft build environment).
638 * Makefile.in: Replace all uses of srcroot with s, to shrink
639 command line lengths.
642 * configure.in: If configuring for newlib, pass --with-newlib to
644 * Makefile.in (CC_FOR_TARGET): If winsup/Makefile exists, pass a
645 -Bnewlib/ and -Lwinsup to gcc.
646 (CXX_FOR_TARGET): Likewise.
650 * Makefile.in (ETC_SUPPORT): Add configure.
654 * configure.in: Use config/mh-dgux386 for i[345]86-dg-dgux
655 host configuration file.
659 * configure.in: Break mn10x00 support into separate
660 mn10200 and mn10300 configurations.
661 * config.sub: Likewise.
665 * configure.in: Add lots of stuff to noconfigdirs for
668 * config.sub, configure.in: Add mn10x00 support.
672 * make-all.com: Call conf-a-gas, not config-a-gas.
676 * configure.in (noconfigdirs): Don't build libgloss for arm-coff
681 * mpw-README: Add much more detail for native PowerMac.
682 * mpw-install: New file.
683 * mpw-configure: Add --norecursion and --help options.
684 * mpw-config.in: Translate readme and install files when
686 * mpw-build.in: Don't always depend on byacc and flex.
687 (install-only-top): New action.
692 * configure.in: You can now configure GDB for the v850.
697 * configure.in (noconfigdirs): Don't configure any C++ dirs
702 * config.sub: Recognize mips64vr5000.
706 * configure.in: Use a single line for host_tools and native_only.
710 * config.sub, configure.in: Add entries for m32r.
714 * Makefile.in (inet-install): Don't run install-gzip.
718 * configure.in: Don't config lots of things for *-*-windows*.
722 * mpw-config.in: Test for mpw-true, true, and null-command scripts.
723 (host_libs, host_tools): Copy from configure.in.
724 * mpw-configure: Don't complain about directories not found.
728 * configure.in (i[345]86): Recognize i686 for pentium pro.
729 (i[3456]86-*-dgux*): Use config/mh-sysv for the host configuration
732 * config.guess (i[345]86): Ditto.
736 * configure.in (noconfigdirs): Removed gdb for D10V.
741 * configure.in: Remove ld, target-libio, target-libg++, and
742 target-libstdc++ from noconfigdirs.
747 * configure: Fix three locations where shell scripts were
748 being run directly rather than with config_shell.
753 * configure.in (v850-*-*): Set up initial $noconfigdirs.
754 * config.sub (basic_machine): Recognize v850.
759 * mpw-configure: Handle multiple enable/disable options and
760 pass them down recursively, handle -c and -s flags appropriately
761 depending on choice of compiler, add escape mechanism for
762 quoted arguments to gC.
766 * configure.in (powerpc*-*-*): For eabi, system V.4, Linux, and
767 solaris targets, use config/mt-ppc to set C{,XX}FLAGS_FOR_TARGETS
768 so that -mrelocatable-lib and -mno-eabi are used.
770 * Makefile.in (CONFIGURE_TARGET_MODULES): If target compiler does
771 not support --print-multi-lib, don't abort.
775 * config/mh-cygwin32 (CFLAGS): Define _WIN32 to be compatible
776 with normal Windows compilation environment.
780 * make-all.com: Run config-a-gas.
781 * setup.com: Don't copy subdirectory files around.
785 * configure.in (*-*-ose): Remove exclusion of libgloss for this
786 target, it now compiles correctly.
790 * mpw-config.in: Generate Mac include for elf/dwarf2.h.
794 * configure.in (d10v-*-*): Remove ld from $noconfigdirs.
798 * configure.in (native_only): Add prms.
802 * Makefile.in (GAS_SUPPORT_DIRS): Add make-all.com and setup.com.
803 (BINUTILS_SUPPORT_DIRS): Likewise.
807 * configure.in (d10v-*-*): Don't configure ld or gdb until the
808 d10v support is added.
812 * configure.in (d10v-*-*): New target.
816 * config.guess (HP 9000/811): Recognize this as a PA1.1
821 * Makefile.in (do-tar-gz): New target, split out from tail end of
822 taz target. Run each command separately, don't use pipes.
827 * mpw-configure: Look for g-mpw-make.sed in config/mpw.
828 * mpw-build.in: No builds should depend on building byacc or flex,
829 they are assumed to be installed already.
833 * Makefile.in (CONFIGURE_TARGET_MODULES): Set r environment
834 variable that CC_FOR_TARGET needs.
838 * Makefile.in (CONFIGURE_TARGET_MODULES): Determine if the multlib
839 options have changed since the last time the subdirectory was
840 configured, and if it has, reconfigure.
841 (CLEAN_TARGET_MODULES): Delete multilib.out and tmpmulti.out, which
842 CONFIGURE_TARGET_MODULES uses to remember the old multilib options.
846 * Makefile.in (ALL_MODULES,CROSS_CHECK_MODULES,INSTALL_MODULES,
847 CLEAN_MODULES): Add bash.
848 (all-bash): New target.
852 * configure.in (mips-sgi-irix6*): Use mh-irix6 instead of mh-irix5.
856 * config.sub (basic_machine): Recognize d10v as a valid processor.
860 * mpw-configure: Add support for --bindir.
861 * mpw-build.in: Use a GCC-specific build script for GCC actions.
865 * configure.in: add bash, time, gawk to list of hosttools and things
866 to only build for native toolchains
870 * Makefile.in (docdir): Remove.
874 * Makefile.in (datadir): Set to $(prefix)/share.
878 * configure.in: build diff and patch for cygwin32-hosted
883 * config.sub: Accept -rtems*.
887 * configure.in: enable dosrel for cygwin32-hosted builds,
888 remove diff from the list of things not buildable
893 * Makefile.in (TARGET_SUBDIR): Move comment to previous line so we
898 * configure.in (mips*-sgi-irix6*): Set noconfigdirs appropriately.
902 * Makefile.in (taz): Handle case where tex3patch didn't even get
903 checked out. Also, if it was found, put the symlink in a new util
908 * config.guess (*:Linux:*:*): Add support for PowerPC Linux.
912 * config.sub: Recognize -openvms.
913 * configure.in (alpha*-*-*vms*): Set noconfigdirs.
914 * make-all.com, setup.com: New files.
918 * Makefile.in (taz): tex3patch moved to texinfo/util.
922 * configure: enable_gdbtk=no for cygwin32-hosted toolchains
923 * configure.in: remove make from disable-if-Can-Cross list
924 enable gdb if ${host} and ${target} are cygwin32
928 * config.guess (i?86-ncr-sysv*): Emit minor release numbers.
929 Recognize the NCR 4850 machine and NCR Pentium-based platforms.
933 * config.guess: Combine mips-mips-riscos cases, and use cpp to
934 distinguish sysv/svr4/bsd variants.
939 * configure.in: Added copyright notice.
940 * move-if-change: Added copyright notice.
944 * configure.in (powerpcle-*-solaris*): Until we get shared
945 libraries working, don't build gdb, sim, make, tcl, tk, or
950 * config.guess: Merge with FSF:
953 * config.guess (*:Linux:*:*): Add guess for sparc-unknown-linux.
956 * config.guess (AViiON:dgux:*:*): Fix typo in recognizing mc88110.
959 * config.guess: Combine two OSF1 rules.
961 * config.guess (dgux): Use /usr/bin/uname rather than uname,
966 * Makefile.in (MAKEDIRS): Removed $(tooldir).
970 * mpw-README: Document GCCIncludes.
974 * configure.in (alpha-*-linux*): Set enable_shared to yes.
978 * mpw-configure: Handle --enable-FOO and --disable-FOO.
982 * configure.in (*-*-cygwin32): Configure make.
986 * Makefile.in (inet-install): Quote value of INSTALL_MODULES.
990 * Makefile.in (all-inet): Depend on all-perl.
992 * Makefile.in (inet-install): New target.
994 * Makefile.in (all-inet): Depend on all-tcl.
995 (all-inet): Depend on all-send-pr.
999 * configure.in (powerpcle-*-solaris*): Turn off tk and tcl
1004 * configure.in: Don't configure --with-gnu-ld on AIX.
1008 * configure.in (powerpcle-*-solaris*): Turn off gdb temporarily.
1012 * Makefile.in (ALL_MODULES): Added all-inet.
1013 (CROSS_CHECK_MODULES): Added check-inet.
1014 (INSTALL_MODULES): Added install-inet.
1015 (CLEAN_MODULES): Added clean-inet.
1016 (all-indent): New target.
1018 * configure.in (host_tools): Added inet.
1019 (native_only): Added inet.
1020 (noconfigdirs): Added inet.
1024 * configure.in: Don't configure libgloss if we are not configuring
1029 * configure.in: Don't configure libgloss for unsupported
1034 * Makefile.in (CLEAN_MODULES): Add clean-apache.
1038 * Makefile.in (ALL_MODULES): Include all-apache.
1039 (CROSS_CHECK_MODULES): Include check-apache.
1040 (INSTALL_MODULES): Include install-apache.
1041 (all-apache): New target.
1043 * configure.in: Added apache everywhere perl is seen.
1047 * Makefile.in: Add support for clean-{module} and
1048 clean-target-{module} rules.
1052 * configure.in (*-*-ose) do not build libgloss.
1056 * config.guess (prep*:SunOS:5.*:*): Turn into
1057 powerpele-unknown-solaris2.
1061 * configure.in: Permit --enable-shared to specify a list of
1066 * configure.in (host==solaris): Pass only the first word of $CC
1067 to /usr/bin/which when checking if we're using /usr/ccs/bin/cc.
1071 * Makefile.in (BASE_FLAGS_TO_PASS): pass down $(MAKE).
1075 * Makefile.in (ALL_MODULES): Include all-perl.
1076 (CROSS_CHECK_MODULES): Include check-perl.
1077 (INSTALL_MODULES): Include install-perl.
1078 (ALL_X11_MODULES): Include all-guile.
1079 (CHECK_X11_MODULES): Include check-guile.
1080 (INSTALL_X11_MODULES): Include install-guile.
1081 (all-perl): New target.
1082 (all-guile): New target.
1084 * configure.in (host_tools): Include perl and guile.
1085 (native_only): Include perl and guile.
1086 (noconfigdirs): Don't build guile and perl; no ports have been
1091 * configure (--enable-*): Handle quoted option lists such as
1092 --enable-sim-cflags='-g0 -O' better.
1096 * Makefile.in ({,inst}all-target): New rule so we can make and
1097 install all of the target directories easily.
1101 * configure.in: Add missing global flag in sed substitution when
1102 deleting `target-' from ${configdirs}.
1106 * Makefile.in (DO_X): Don't get confused if CC contains `=' in an
1109 * configure.in (mips*-nec-sysvr4*): Use a host_makefile_frag of
1112 * install.sh: Correct misspelling of transformbasename.
1114 * config.guess: Recognize mips-*-sysv*.
1118 * config.sub: Recognize mon960.
1122 * configure: Restore Canadian Cross handling of BISON and LEX,
1123 removed in Feb 20 change.
1128 Mention make install. Remove the old copyright date as well the
1129 clumsy and rather pointless copyright on the README file.
1133 * Makefile.in ($(CONFIGURE_TARGET_MODULES)): If there is a
1134 Makefile after running symlink-tree, then run `make distclean' to
1135 avoid clobbering any generated files in srcdir.
1139 * configure.in (m68k-*-netbsd*): Build everything now.
1143 * Makefile.in (taz): Fix quoting.
1147 * configure.in (sparclet-*-*): Build everything now.
1151 * configure.in (m68k-*-linux*): New host.
1155 * configure: Check for bison before byacc.
1159 * Makefile.in configure: Change the way LEX and BISON/YACC are
1160 set. configure now defines DEFAULT_LEX and DEFAULT_YACC by
1161 searching PATH. These are used as fallbacks by Makefile.in if
1162 flex/bison/byacc aren't in objdir.
1166 * Makefile.in: Make everything which depends upon all-bfd also
1167 depend upon all-opcodes, in case --with-commonbfdlib is used.
1171 * configure.in (host *-*-cygwin32): Don't build gdb if we are
1172 building NT native compilers on Unix.
1176 * configure.in: Don't get CC from the host Makefile fragment if we
1177 can find gcc in PATH, or if this is a Canadian Cross. Move the
1178 Solaris test for /usr/ucb/cc to the post target script, just after
1179 the compiler sanity test.
1183 * config.sub: Merge with FSF.
1187 * Makefile.in (RPATH_ENVVAR): New variable.
1188 (REALLY_SET_LIB_PATH): Use it.
1189 * configure.in: On HP/UX, set RPATH_ENVVAR to SHLIB_PATH.
1193 * config.sub, configure.in: Recognize sparclet cpu.
1197 * config.guess: Support m68k-cbm-sysv4.
1201 * config.guess (*:Linux:*:*): Guess m68k-unknown-linux and
1202 m68k-unknown-linuxaout from linker help string. Put quotes around
1207 * config.guess (powerpc-harris-powerunix): Add guess for port
1212 * config.guess (UNAME_VERSION): Recognize X4.x as an OSF version.
1216 * configure.in: If --enable-shared was used, set SET_LIB_PATH to
1217 $(REALLY_SET_LIB_PATH) in Makefile.
1218 * Makefile.in (SET_LIB_PATH): New variable.
1219 (REALLY_SET_LIB_PATH): New variable.
1220 ($(DO_X)): Use $(SET_LIB_PATH).
1221 (install.all, gcc-no-fixedincludes, $(ALL_MODULES)): Likewise.
1222 ($(NATIVE_CHECK_MODULES), $(CROSS_CHECK_MODULES)): Likewise.
1223 ($(INSTALL_MODULES), $(CONFIGURE_TARGET_MODULES)): Likewise.
1224 ($(ALL_TARGET_MODULES), $(CHECK_TARGET_MODULES)): Likewise.
1225 ($(INSTALL_TARGET_MODULES), $(ALL_X11_MODULES)): Likewise.
1226 ($(CHECK_X11_MODULES), $(INSTALL_X11_MODULES)): Likewise.
1227 (all-gcc, all-bootstrap, check-gcc, install-gcc): Likewise.
1228 (install-dosrel): Likewise.
1229 (all-opcodes): Depend upon all-libiberty.
1233 * config.guess (*:CYGWIN*): New
1237 * Makefile.in (all-target-winsup): All all-target-libiberty.
1241 * configure.in (noconfigdirs): Add missing # in front of comment.
1245 * configure.in: add second pass to things added to noconfigdirs
1246 so *-gm-magic can exclude libgloss properly.
1250 * mpw-configure (extralibs_name, rez_name): Set correctly
1251 for MWC68K compiler.
1253 * mpw-README: Add more info on the necessary build tools.
1257 * configure.in, config.sub: Recognize cygwin32.
1261 * config.guess, config.sub: Recognize A/UX.
1265 * config.sub: Merge with gcc/config.sub.
1269 * mpw-build.in (do-binutils): Add build of stamps.
1273 * config.sub: Add recognition for mips64vr4100*-* targets.
1277 * test-build.mk: Add checking of `hpux9' rather than just `hpux'.
1278 Add creation of gconfigargs with `--enable-shared' turned on.
1279 ($(host)-stamp-stage2-configured): Pass $(gconfigargs).
1280 ($(host)-stamp-stage3-configured): Likewise.
1281 (HOLES): Add chatr and ldd.
1282 (i386-ncr-sysv4.3*): Add use of /usr/ccs/bin in the PATH and HOLE_DIRS.
1286 * configure: Pass --nfp to recursive configures.
1290 * Makefile.in (DLLTOOL): New.
1291 (DLLTOOL_FOR_TARGET): New.
1292 (EXTRA_HOST_FLAGS): Pass down DLLTOOL.
1293 (EXTRA_TARGET_FLAGS): Ditto.
1294 (EXTRA_GCC_FLAGS): Ditto.
1295 (CONFIGURE_TARGET_MODULES): Ditto.
1297 * configure: Add DLLTOOL.
1302 * configure.in (i[345]86-*-sco3.2v5*): Use mh-sysv instead of
1303 mh-sco, since old workarounds no longer needed, and don't
1304 build ld, since libraries have weak symbols in COFF.
1308 * Makefile.in (CONFIGURE_TARGET_MODULES): Add missing ';'.
1312 * configure.in: Make sure that ${CC} can be used to compile an
1317 * Makefile.in (all-gdb): Depend on $(GDB_TK).
1318 * configure (GDB_TK): Set GDB_TK to either "all-tcl all-tk" or
1319 nothing depending on whether gdbtk is being built.
1323 * Makefile.in (newlib.tar.gz): Delete building of newlib's info files.
1327 * configure.in (noconfigdirs): Put ld or gas in this early, if the
1328 user specifically used --with-gnu-ld=no or --with-gnu-as=no.
1332 * config-ml.in: Add support for
1333 --disable-{softfloat,m68881,m68000,m68020} on m68*-*-*.
1334 Simplify setting of multidirs from --disable-foo.
1338 * Makefile.in (EXTRA_GCC_FLAGS): If any of the make variables
1339 LANGUAGES, BOOT_CFLAGS, STMP_FIXPROTO, LIMITS_H_TEST,
1340 LIBGCC1_TEST, LIBGCC2_CFLAGS, LIBGCC2_INCLUDES, and ENQUIRE are
1341 non-empty, pass them on to the GCC make.
1342 (all-bootstrap): New rule that is like all-gcc, except it executes
1343 the GCC bootstrap rule instead of the GCC all rule.
1347 * config-ml.in (ml_realsrcdir): New, to account for ${subdir}.
1351 * config.guess (AViiON:dgux:*:*): Update from FSF to add pentium
1356 * config.sub (i*86*) Change [345] to [3456]
1360 * configure.in (noconfigdirs): Add gas or ld if --with-gnu-as=no or
1365 * config-ml.in (rs6000*, powerpc*): Add switches to control which
1366 AIX multilibs get built.
1370 * configure.in (i386-win32): Don't build expect if we're not
1371 building the tcl subdir.
1375 * Makefile.in: (configure-target-examples, all-target-examples):
1376 New targets, configure and build example programs.
1380 * mpw-configure: If an mpw-config.in generated a file mk.sed,
1381 use it as input to sedit the generated MPW makefile.
1382 * mpw-README: Add a suggestion about Gestalt.h.
1386 * config.sub: Accept *-*-ieee*.
1390 * Makefile.in (local-distclean): Remove $(TARGET_SUBDIR). From
1395 * configure.in (host==powerpc-pe): Add many directories to noconfigdirs
1396 for powerpc-pe native.
1397 (target==i386-win32): add tcl, make to noconfigdirs if canadian cross.
1398 (target==powerpc-pe): duplicate i386-win32 entry.
1402 * configure.in (noconfigdirs): Exclude target-newlib for all versions
1403 of vxworks, not just vxworks5.1.
1407 * mpw-configure: Add support for exec-prefix.
1411 * config.guess: Recognize HP model 816 machines as having
1416 * configure: Ignore new autoconf configure options.
1420 * config/mt-v810 (CC_FOR_TARGET): Add -ansi flag. NEC compiler
1421 defaults to K&R mode, but doesn't have varargs.h, so we have to
1422 compile in ANSI mode.
1426 * config.guess: Recognize Pentium under SCO.
1431 * configure.in (noconfigdirs): Disable target-libio on v810-*-*.
1432 * config/mt-v810 (CC_FOR_TARGET, AS_FOR_TARGET, AR_FOR_TARGET,
1433 RANLIB_FOR_TARGET): Set as appropriate for NEC v810 toolchain.
1437 * configure.in: Don't configure gas for alpha-dec-osf*.
1441 * configure.in: Default to --with-stabs for some targets for which
1442 it makes sense: mips*-*-*, alpha*-*-osf*, i[345]86*-*-sysv4* and
1443 i[345]86*-*-unixware*.
1447 * config-ml.in: Get list of multidirs using gcc --print-multi-lib
1448 rather than basing it on the target. Simplify handling of options
1449 controlling which directories to configure. Remove extraneous
1450 slash in multi-clean target.
1454 * config-ml.in: Prefix more variables with ml_ so they don't collide
1459 * configure: Don't turn -v into --v.
1463 * configure.in (targargs): Fix typo.
1465 * Makefile.in (DEVO_SUPPORT): Add symlink-tree.
1469 * configure.in: Strip --host and --target options from
1470 CONFIG_ARGUMENTS, and always configure for --host only. Add
1471 --with-cross-host option when building with a cross-compiler.
1472 * configure: Canonicalize the arguments put into config.status by
1473 always using `=' for an option with an argument. Pass a presumed
1474 --host or --target explicitly.
1478 * config.sub: Merge -macos*, -magic*, -pe*, and -win32 cases
1479 into general OS recognition case.
1483 * configure.in (target_configdirs): add target-winsup only
1484 for win32 target systems.
1488 * Makefile.in (all-target-libgloss): Depend upon
1489 configure-target-newlib, since when libgloss is built it looks to
1490 see if the newlib directory exists.
1494 * Makefile.in (DEVO_SUPPORT): Use config-ml.in instead of
1499 * configure: Handle LD and LD_FOR_TARGET when configuring a
1504 * config/mh-i386win32: add LD_FOR_TARGET.
1508 * configure.in (target_libs): add target-winsup.
1509 (target==i386-win32): add patch diff flex make to $noconfigdirs.
1510 (target==ppcle-pe): remove ld from $noconfigdirs.
1514 * Makefile.in (CONFIGURE_TARGET_MODULES): Pass --with-target-subdir.
1515 Preserve relative path names in $srcdir. Build symlink tree if
1516 configuring cross target dir and srcdir=. (= no VPATH support).
1517 (configure-target-libg++): Depend on configure-target-librx.
1518 * cfg-ml-com.in, cfg-ml-pos.in: Deleted.
1519 * config-ml.in: New file.
1520 * symlink-tree: New file.
1521 * configure: Ensure srcdir="." if that's what it is.
1525 * mpw-README: Clarify some phrasing, add notes about CodeWarrior
1526 includes and FLEX_SKELETON setting.
1527 * mpw-configure (--with-gnu-ld): New option, controls whether
1528 to use PPCLink or ld with PowerMac GCC.
1529 * mpw-build.in (all-grez, do-grez, install-grez): New targets.
1530 * mpw-config.in: Configure grez if targeting Mac.
1532 * config.sub: Accept pmac and pmac-mpw as names for PowerMacs,
1533 accept mpw and mac-mpw as names for m68k Macs, change macos7 to
1535 * configure.in: Configure grez resource compiler if targeting Mac.
1536 * Makefile.in (all-grez, install-grez): New targets.
1540 * configure: CXX defaults to gcc, not g++. If we find
1541 gcc in the path, set CC to gcc -O2.
1545 * configure: Default ${build} correctly. Avoid picking up extra
1546 spaces when reading CC and CXX from Makefile. When doing a
1547 Canadian Cross, use plausible default values for numerous
1549 * configure.in: When doing a Canadian Cross, don't try to
1550 configure tools whose configure script can't handle it.
1554 * cfg-ml-com.in (sh-*-*): Add m2 and ml/m2 to multidirs.
1558 * configure: Remove dubious bug reporting address.
1562 * Makefile.in ($(CONFIGURE_TARGET_MODULES)): If subdir has
1563 configure script, run that instead of this directory's configure.
1564 In either case, print a message that we're configuring the sub-dir.
1568 * configure.in: Before checking for the existence of various files,
1569 use sed to filter out "target-".
1573 * Makefile.in (DO_X): Split rule to decrease command line length
1575 (Philippe De Muyter).
1579 * Makefile.in (all-patch): depend on all-libiberty.
1583 * configure.in: If the only directory in target_configdirs which
1584 actually exists is libiberty, then set target_configdirs to empty,
1585 to avoid trying to build a target libiberty in a gas or gdb
1590 * configure.in (host_makefile_frag): Use m68k-sun-sunos* instead
1591 of m68k-sun-* when selecting mh-sun3 to avoid matching NetBSD/sun3
1596 * configure.in (copy_dirs): Use sys-include instead of include
1597 for --with-headers option.
1601 * Makefile.in, configure.in: Make winsup builds work with
1606 * configure.in: Build the linker on AIX.
1610 * Makefile.in (CC_FOR_TARGET, CXX_FOR_TARGET): Add $(TARGET_SUBDIR)
1615 * Makefile.in (all-gcc): Fix typo.
1619 * Makefile.in ($(CHECK_TARGET_MODULES)): Fix typo.
1623 * configure.in: Rename libFOO to target-libFOO, and xiberty
1624 to target-xiberty, to provide more flexibility.
1625 (target_subdir): Define. Create if cross.
1626 Set TARGET_SUBDIR in Makefile to ${target_subdir}.
1627 * Makefile.in: Rename all-libFOO -> all-target-libFOO, all-xiberty
1628 -> all-target-libiberty, configure-libFOO -> configure-target-libFOO,
1629 check-libFOO -> check-target-libFOO, etc.
1630 ($(DO_X)): Iterate over TARGET_CONFIGDIRS after SUBDIRS.
1631 ($(CONFIGURE_TARGET_MODULES), $(CHECK_TARGET_MODULES),
1632 $(ALL_TARGET_MODULES), $(INSTALL_TARGET_MODULES)): Update accordingly.
1633 (configure-target-XXX): Depend on $(ALL_GCC), not all-gcc, to
1634 allow ALL_GCC="" to only configure.
1635 (DEVO_SUPPORT): Add cfg-ml-com.in and cfg-ml-pos.in.
1636 (ETC_SUPPORT, ETC_SUPPORT_PFX): Merge; update 'taz' accordingly.
1637 (LIBGXX_SUPPORT_DIRS): Remove xiberty.
1641 * Makefile.in (taz): Build "info" in etc explicitly.
1645 * configure.in: Make sure that CC is undefined (as opposed to
1646 null) if toplevel/config/mh-{host} doesn't define it. Fixes a
1647 problem with autoconf trying to configure on a host without GCC.
1652 * config.sub: Add `magic' as an OS target for General Magic.
1657 * mpw-configure: Set host alias from choice of host compiler,
1658 only use generic MPW Makefile sed if present, edit a file
1659 named "hacked_Makefile.in" instead of "Makefile.in" if present.
1660 * mpw-README: Add problem notes about CW6 and CW7.
1664 * Makefile.in (taz): Use ";" instead of ";;".
1668 * Makefile.in (taz): Grep for '^diststuff:' or '^info:' in
1669 sub-directory Makefiles, instead of using DISTSTUFFDIRS and
1671 (DISTSTUFFDIRS, DISTDOCDIRS): Removed - no longer used.
1672 (newlib.tar.gz): Don't pass DISTDOCDIRS to recursive make.
1676 * Makefile.in (DISTDOCDIRS): Remove ld gprof bnutils gas libg++ gdb
1677 and gnats, because they are now subsumed by DISTSTUFFDIRS.
1678 Move bfd to DISTSTUFFDIRS.
1682 * Makefile.in (X11_LIB): Removed.
1683 (X11_FLAGS_TO_PASS): pass only X11_EXTRA_CFLAGS and X11_EXTRA_LIBS.
1685 * configure.in (host_makefile_frag): mh-aix & mh-sun removed.
1689 * cfg-ml-com.in (powerpc*): Shorten some of the multilib directory
1694 * cfg-ml-com.in (powerpc*-eabi*): Add mcall-aixdesc varients.
1698 * configure.in (i[345]86-*-win32): Always build newlib.
1699 Don't configure cvs, autoconf or texinfo.
1700 * Makefile.in (LD_FOR_TARGET): New.
1701 (BASE_FLAGS_TO_PASS, EXTRA_TARGET_FLAGS, CONFIGURE_TARGET_MODULES):
1702 Pass down LD_FOR_TARGET.
1706 * winsup: New directory.
1707 * Makefile.in: Build winsup.
1708 * configure.in: Winsup is configured when target is win32.
1709 Can only build win32 target GDB when native.
1713 * config.guess: Recognize HP model 819 machines as having
1718 * configure: Fix sed loop which substitutes for CC and CXX to
1719 avoid bug found in various sed implementations.
1723 * cfg-ml-com.in (powerpc-*-eabisim): Delete separate rule for
1724 simulator. Use standard powerpc-*-eabi*.
1728 * configure.in: Stop putting gas and binutils in noconfigdirs for
1729 powerpc-*-aix* and rs6000-*-*.
1733 * cfg-ml-com.in (powerpc*-*-eabisim*): Add support for building
1734 -mcall-aixdesc libraries.
1740 * config.sub (arm | armel | armeb): Fix shell syntax.
1744 * cfg-ml-com.in ({powerpc,rs6000}-ibm-aix*): Add multilibs for
1745 -msoft-float and -mcpu=common support.
1746 (powerpc*-*-eabisim*): Add support for building -mcall-aix
1751 * configure.in: Allow configuration and build of emacs19 for the alpha.
1755 * configure.in (CC): Get ^CC, not just any old CC, from
1756 ${host_makefile_frag}.
1760 * configure.in (CC): Try to get CC from
1761 ${srcdir}/${host_makefile_frag}, not ${host_makefile_frag}.
1765 * Makefile.in (TARGET_CONFIGDIRS): configure targetdirs
1766 only if it exists in $(srcdir).
1770 * configure: If CC and CXX are not set in the environment, set
1771 them, based on either an existing Makefile or on searching for gcc
1772 in PATH. Substitute for CC and CXX in Makefile.
1773 * configure.in: Remove libm from target_libs. Separate
1774 target_configdirs from configdirs. If CC is not set in
1775 environment, try to get it from a host Makefile fragment. Rewrite
1776 changes of configdirs to use skipdirs instead. A few minor
1777 tweaks. Take directories out of target_configdirs as they are
1778 taken out of configdirs. Remove existing Makefile files from
1779 subdirectories. Substitute for TARGET_CONFIGDIRS and
1780 CONFIG_ARGUMENTS in Makefile.
1781 * Makefile.in (TARGET_CONFIGDIRS): New variable, automatically set
1783 (CONFIG_ARGUMENTS): Likewise.
1784 (CONFIGURE_TARGET_MODULES): New variable.
1785 ($(DO_X)): Loop over TARGET_CONFIGDIRS as well as SUBDIRS.
1786 ($(CONFIGURE_TARGET_MODULES)): New target.
1787 (configure-libg++, configure-libio): New targets.
1788 (all-libg++): Depend upon configure-libg++.
1789 (all-libio): Depend upon configure-libio.
1790 (configure-libgloss, all-libgloss): New targets.
1791 (configure-libstdc++): New target.
1792 (all-libstdc++): Depend upon configure-libstdc++.
1793 (configure-librx, all-librx): New targets.
1794 (configure-newlib): New target.
1795 (all-newlib): Depend upon configure-newlib
1796 (configure-xiberty): New target.
1797 (all-xiberty): Depend upon configure-xiberty.
1801 * configure.in (host i[345]86-*-win32): Expand the
1806 * mpw-configure: Fix sed command file name.
1810 * configure.in (host i[345]86-*-win32): Reduce the
1815 * configure.in: Don't configure ld and gdb for powerpc*-*-winnt*
1816 or powerpc*-*-pe*, since they are not yet supported.
1820 Add PowerMac support and many other enhancements.
1821 * mpw-configure: New option --cc to select compiler to use,
1822 paste options set according to --cc into the generated
1823 Makefile, generate the Makefile by sed'ing the Unix Makefile.in
1824 if mpw-make.sed is present.
1825 * mpw-config.in: Don't test for gC1, test for mpw-touch,
1826 add forward includes for PowerPC include files.
1827 * mpw-build.in: Build using Makefile.PPC if present.
1828 (do-byacc, etc): Remove separate version resource builds.
1829 (do-gas): Build "stamps" before "all".
1830 (do-gcc): Build "stamps-h" and "stamps-c" before "all".
1831 * mpw-README: Update to reflect --cc option, PowerMac support,
1832 and recently-reported compatibility problems.
1836 * cfg-ml-com.in (m68*-*-*): Only build multilibs for
1837 embedded m68k systems (-aout, -coff, -elf, -vxworks).
1838 (--with-multilib-top): Pass to recursive invocations.
1842 * configure.in (noconfigdirs): Disable libg++ and libstdc++ on
1847 * configure.in (noconfigdirs): Disable bfd, binutils, gas, gcc,
1848 gdb, ld and opcodes on v810-*-*.
1852 * config/mh-ncrsvr43: Removed AR_FLAGS
1856 * Makefile.in (DO_X): Change do-realclean to do-maintainer-clean.
1857 (local-maintainer-clean): New target.
1858 (maintainer-clean): New target.
1859 (realclean): Just depend upon maintainer-clean.
1863 * configure.in (noconfigdirs): Disable gdb on m68k-*-netbsd*.
1867 * configure.in: Build ld in mips*-*-bsd* case.
1871 * config.sub: Accept -lites* OS. From Ian Dall.
1875 * config.sub: recognise mips64vr4300 and mips64vr4300el as valid
1880 * configure.in: treat i386-win32 canadian cross the same as
1881 i386-go32 canadian cross.
1885 * cfg-ml-com.in (powerpc*-*-eabisim): Add support for PowerPC
1886 running under the simulator to build a reduced set of libraries.
1887 (powerpc-*-eabiaix): Add fine grained multilib support added to
1888 other powerpc targets yesterday.
1892 * cfg-ml-com.in (powerpc*): Add support for -disable-biendian,
1893 -disable-softfloat, -disable-relocatable, -disable-aix, and
1894 -disable-sysv to control which multilib libraries get built.
1898 * configure: Add Makefile.tem to list of files to remove in trap
1903 * config.guess (*Linux*): Add missing "exit"s.
1904 Also, need specific check for alpha-unknown-linux (uses COFF).
1908 * config.guess: Merge with FSF:
1911 * config.guess (AIX4): More robust release numbering discovery.
1914 * config.guess (i386-sequent-ptx): Properly get version number.
1917 * config.guess (mips:*:4*:UMIPS): New case.
1921 * configure.in (i386-go32 host): Fix typo (deja-gnu -> dejagnu).
1922 (i386-win32 host): Likewise. Don't build readline.
1926 * Makefile.in (GDBTK_SUPPORT_DIRS): Define and pass as part of
1927 SUPPORT_FILES to submakes.
1931 * Makefile.in (GDB_SUPPORT_DIRS): Add utils.
1932 (DEVO_SUPPORT): Add mpw-README, mpw-build.in, mpw-config.h and
1937 * configure.in (appdirs): Use =, not ==, in test expression when
1938 trying to build the text to print in the warning message for
1943 * cfg-ml-com.in (z8k-*-coff): Add 'std' multilib build.
1947 * config.guess: Recognize lynx-2.3.
1951 * config.sub (z8ksim): Deleted
1952 (z8k-*-coff): New, this is the one true name of the target.
1956 * cfg-ml-pos.in (dotdot): Work around SunOS sed bug.
1960 * config.guess (*:Linux:*:*): First try asking the linker what the
1961 default object file format is (elf, aout, or coff). Then if this
1962 fails, try previous methods.
1966 * configure.in: Don't build newlib for *-*-vxworks5.1.
1970 * configure.in: Don't build newlib for a29k-*-vxworks5.1.
1971 * test-build.mk: Add setting of --with-headers for a29k-vxworks5.1.
1975 * cfg-ml-pos.in (MULTITOP): Trim excess trailing "/.".
1979 * cfg-ml-com.in: New file.
1980 * cfg-ml-pos.in: New file.
1984 * COPYING.NEWLIB: Add HP free copyright to list.
1988 * config.sub: Recognize -eabi* for the system, not just -eabi.
1992 * Makfile.in (DLLTOOL_FOR_TARGET): New name, pass it down.
1993 * config.sub, configure.in (win32): New target and host.
1997 * configure.in: Add i386-pe configuration.
2001 * mpw-build.in (install): Install GDB after LD.
2005 * mpw-config.in (elf/mips.h): Always forward-include, needed
2010 * testsuite: New directory for customer acceptance and whole tool
2015 * configure: If per-host line isn't found, but AC_OUTPUT is found
2016 and a configure script exists, run it instead.
2020 * config.guess: Update from FSF, for alpha-dec-winnt3.5 and Crays.
2024 * configure: Set build_{cpu,vendor,os,alias} to host values when
2025 --build isn't specified.
2029 * Makefile.in (PICFLAG, PICFLAG_FOR_TARGET): New macros.
2030 (FLAGS_TO_PASS): Pass them.
2031 (EXTRA_TARGET_FLAGS): Ditto.
2033 * config/m?-*pic: Define PICFLAG* instead of LIB*FLAGS*.
2037 * Makefile.in (all-libg++): Depend on all-libstdc++.
2041 * configure.in (noconfigdirs): Enable all packages for
2042 i386-unknown-netbsd.
2046 * configure.in (noconfigdirs): Don't configure tk for i386-go32
2047 hosted builds (DOS builds)
2051 Changes for ARM based on patches from Richard Earnshaw:
2052 * config.sub: Handle armeb and armel.
2053 * configure.in: Omit arm linker only for riscix.
2057 * config.guess: Update from FSF.
2061 * config.sub: Recognize powerpcle as the little endian varient of
2062 the PowerPC. Recgonize ppc as a PowerPC variant, and ppcle as a
2063 powerpcle variant. Convert pentium into i586, not i486. Add p5
2064 alias for i586. Map new x86 variants p6, k5, nexgen into i586
2069 * configure.in (hppa*-*-lites*): Treat like hppa*-*-*elf*.
2073 * config.sub: Accept -lites* as a basic system type.
2077 * config.guess (*:Linux:*:*): Check for whether the pre-BFD linker is
2078 installed, and if so return linuxoldld as the system name.
2082 * config.guess: Add hppa1.1-hp-lites support.
2086 * configure.in: Don't build newlib for m68k-vxworks5.1.
2090 * configure.in (mips-sgi-irix6): Use mh-irix5.
2094 * Makefile.in (all-gcc): Depend on all-ld (for libgcc1-test).
2098 * test-build.mk: Enable building of shared libraries on IRIX 5 and
2099 OSF/1. Fix compiler flags.
2100 * build-all.mk: Support Linux and OSF/1 3.0. Fix compiler flags.
2104 * configure.in: Recognize --with-newlib.
2105 (sparc-*-sunos4*): Build sim, dejagnu, expect, tcl if cross target.
2109 * Makefile.in: move {all,check,install}-gdb from *_MODULES
2110 to *_X11_MODULES due to gdbtk needing X include files et al.
2114 Merge in support for Mac MPW as a host.
2115 (Old change descriptions retained for informational value.)
2117 * mpw-config.in: Add generic include forwards for cpu-specific
2118 include files in aout and elf directories.
2120 * mpw-configure: Added copyright.
2121 * mpw-config.in: Check for presence of required build tools.
2122 (target_libs): Add newlib.
2123 (target_tools): Add examples.
2124 (Read Me): Generate as "Read Me for MPW" instead.
2125 * mpw-build.in: Base sub-builds on all-foo instead of do-foo.
2126 (all-byacc, do-byacc, all-flex, do-flex, do-newlib): New actions.
2127 (do-gas, do-gcc, do-gdb, do-ld): Build Version.r first.
2129 * mpw-configure: Remove subdir-specific makefile hackery,
2130 delete mk.tmp after using it.
2132 * mpw-build.in (all): Display start and end times.
2134 * mpw-configure (host_canonical): Set.
2135 (target_cpu): Always add to makefiles.
2136 (ARCHDEFS, EMUL): Add to makefile only if nonempty.
2137 (TM_FILE, XM_FILE, NM_FILE): No longer add to makefile.
2138 (mpw-mh-mpw): Look for in srcdir and srcroot.
2139 Use sed instead of mpw-edit-prefix to edit prefix definitions.
2141 * mpw-build.in: (install-only): New target.
2143 * mpw-configure (host_alias, target_alias): Rename from hostalias
2144 and targetalias, add into generated Makefile.
2145 (mk.tmp): If present, add into generated Makefile.
2146 * mpw-build.in (all-gas): Build config.h first before gas proper.
2148 * mpw-configure (config.status): Write only if changed.
2149 * mpw-config.in (readline): Configure it (not built, just used for
2152 * mpw-config.in (elf/mips.h): Add a forward include.
2154 * mpw-config.in: Forward-include most .h files in include into
2156 (readline): Don't build.
2157 mpw-build.in (install): Install GDB.
2159 * mpw-configure (prefix, mpw_prefix): Handle it.
2160 * mpw-config.in (mmalloc, readline): Don't configure.
2161 * mpw-build.in (thisscript): Rename to ThisScript.
2162 Use mpw-build instead of BuildProgram everywhere.
2163 (mmalloc, readline): Don't build.
2164 * mpw-README: New file, basic documentation about the MPW port.
2166 * mpw-config.in: Use forward-include to create include files.
2168 * mpw-configure: Add more things to the top of each configured
2169 Makefile, including contents of config/mpw-mh-mpw.
2170 * mpw-config.in (extra-include): Create this directory and fill it
2171 with Posix-like include files when configuring.
2173 * config.sub (apple, mac, mpw): Add various aliases.
2175 * mpw-build.in: New file, top-level build script fragment for MPW.
2176 * mpw-configure: New file, configure script for MPW.
2177 * mpw-config.in: New file, config fragment for MPW.
2181 * configure.in (host_libs): Remove glob, since it is gone from the
2186 * Makefile.in: define empty GDB_NLM_DEPS var.
2188 * configure.in(target_makefile_frag): use config/mt-netware
2189 for netware targets.
2193 * config.sub: Merge in recent FSF changes. Remove linux special
2198 build-all.mk,config/mh-solaris: revert these two changes:
2202 * build-all.mk: Use CC=cc -Xs on Solaris.
2204 Mon Mar 29 19:59:26 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2206 * config/mh-solaris: SunPRO C needs -Xs to be able to get a
2207 working xmakefile for Emacs.
2211 * glob/*: Removed. Schauer's 24 Feb 1994 readline change made us
2213 * Makefile.in: Nuke all references to glob subdirectory.
2217 * configure.in: Fix --enable-shared logic in per-host.
2221 * configure.in (*-hp-hpux[78]*): Use mh-hpux8.
2225 * configure.in (noconfigdirs): Don't build gas on AIX, for
2226 powerpc*-*-aix* as well as for rs6000*-*-aix*.
2230 * configure: Fix --cache-file to work if the file argument is a
2235 * configure: If the --cache-file is used, pass it down to
2236 configure in subdirectories.
2240 * config.sub: add vxworks29k configuration.
2244 * Makefile.in (taz): Do "diststuff" part quietly.
2248 * config.sub: Mini-merge with gcc/config.sub.
2252 * config.guess (IRIX): Sed - to _.
2256 * Makefile.in (source-vault, binary-vault): New targets.
2260 * config.sub: Recognize -eabi as a basic system type.
2264 * configure.in (enable_shared stuff): Fix typo.
2268 * Makefile.in (BASE_FLAGS_TO_PASS): Fix typo in passing LIBCXXFLAGS*.
2272 * Makefile.in (LIBCXXFLAGS_FOR_TARGET): Add -fno-implicit-templates.
2276 * configure.in (rs6000-*-*): Don't build gas.
2280 * Makefile.in: Use /x/x/ instead of /brokensed/brokensed/, to
2281 reduce command line length.
2282 (AS_FOR_TARGET): Check for as.new, not Makefile.
2283 (NM_FOR_TARGET): Check for nm.new, not Makefile.
2287 * config.guess: Merge from FSF.
2291 * configure: Don't use $ when handling program_suffix.
2295 * configure.in: Configure tk for hppa/hpux.
2299 * Makefile.in (LIBGXX_SUPPORT_DIRS): Add libstdc++.
2303 * Makefile.in: Move -fno-implicit-template from CXXFLAGS
2304 to LIBCXXFLAGS. Tests are better run without it.
2308 * Makefile.in (all-ispell): Depend on all-emacs19 instead of all-emacs.
2312 * configure.in (*-*-netware*): Don't configure xiberty.
2316 * configure.in: Remove tk from native_only list.
2320 * build-all.mk: Add mips-ncd-elf target to sun4 targets
2321 for special NCD build.
2325 * Makefile.in (DEVO_SUPPORT): Remove configure.bat and
2326 makeall.bat, they're only useful for binutils snapshots.
2327 (binutils.tar.gz, gas+binutils.tar.gz): Add configure.bat and
2328 makeall.bat to specified SUPPORT_FILES.
2332 * build-all.mk: Add Ericsson targets to sun4 and solaris
2333 hosts. Add BNR's sun4 target to solaris host, so their
2334 build-from-source will be tested in-house first.
2338 * Makefile.in (LIBCFLAGS): New variable.
2339 (CFLAGS_FOR_TARGET): Ditto.
2340 (LIBCFLAGS_FOR_TARGET): Ditto.
2341 (LIBCXXFLAGS): Ditto.
2342 (CXXFLAGS_FOR_TARGET): Ditto.
2343 (LIBCXXFLAGS_FOR_TARGET): Ditto.
2344 (BASE_FLAGS_TO_PASS): Pass them.
2345 (EXTRA_TARGET_FLAGS): Ditto.
2347 * configure.in, config/m[th]-*pic: Support --enable-shared.
2351 * configure.in (target_libs): Include libstdc++ again.
2352 * config.guess: Update from FSF (for FreeBSD).
2356 * Makefile.in (DEVO_SUPPORT): Include configure.bat and
2358 (DISTDOCDIRS): Add `etc'.
2359 (ETC_SUPPORT_PFX): New variable.
2360 (taz): Include anything from etc starting with a word in
2365 * config.sub: Update for recent FSF changes. Remove obsolete
2366 h8300hds entry. Add -windows* and -osx as basic os. Minor
2371 * configure.in (target_libs): Remove libstdc++ for libg++-2.6.1.
2373 * config.guess: Merge with FSF.
2374 * configure.in: Match on i?86-ncr-sysv4.3, not i?86-ncr-sysv43.
2378 * configure: Since the "trap 0" handler will override the exit
2379 status on many systems, only use it for "exit 1", and make it set
2380 a non-zero exit status; reset it before "exit 0". Also, check
2381 exit status of config.sub, and error out if it failed.
2385 * Makefile.in: (ALL_TARGET_MODULES,INSTALL_TARGET_MODULES) Build
2386 and install libgloss.
2390 * Makefile.in (all-binutils): Depend upon all-byacc.
2392 * configure.in: Don't build emacs on Irix 5.
2396 * configure.in (*-*-netware*): Add libio.
2400 * Makefile.in (ALL_TARGET_MODULES): Add libstdc++.
2401 (CHECK_TARGET_MODULES): Ditto.
2402 (INSTALL_TARGET_MODULES): Ditto.
2403 (TARGET_LIBS): Ditto.
2404 (all-libstdc++): Note dependencies.
2408 * Makefile.in (BINUTILS_SUPPORT_DIRS): Add gas.
2412 * Makefile.in (CXXFLAGS): Use -fno-implicit-templates instead of
2413 -fexternal-templates.
2415 * configure.in (target_libs): Add libstdc++.
2416 (noconfigdirs): Add libstdc++ as appropriate.
2420 * config.guess: Update from FSF.
2424 * configure: Use ${config_shell} when running ${configsub}.
2428 * config.sub: No longer recognize h8300h.
2432 * config.sub: Remove extraneous differences between config.sub and
2437 * Makefile.in (DISTSTUFFDIRS): Add gas.
2441 * COPYING.NEWLIB: New file.
2445 * config.guess (HP-UX): Patch from Harlan Stenn
2450 * config.guess (sun4*:SunOS:*:*): Change '-JL' to '_JL'.
2454 * config.sub: Merge nextstep cleanup from FSF.
2458 * configure.in (arm-*-*): Don't configure ld for this target.
2462 * configure.in (*-*-netware): don't configure libg++, libio,
2467 * configure.in (alpha-dec-osf*): Use osf*, not osf1*. Don't
2468 configure ld--it works, but it doesn't support shared libraries.
2472 * config.guess (*-unknown-freebsd*): Get rid of possible
2473 trailing "(Release)" in version string.
2478 * config.guess: Fix i486-ncr-sysv43 -> i486-ncr-sysv4.3.
2479 Fix type: *-next-neststep -> *-next-nextstep.
2481 * config.guess: Merge from FSF:
2485 * config.guess: Recognize powerpc-ibm-aix3.2.5.
2489 * config.guess: Recognize UnixWare 1.1 (UNAME_SYSTEM is SYSTEM_V
2490 instead of UNIX_SV for UnixWare 1.0).
2494 * Makefile.in (all-gdb): Add dependencies on all-gcc and all-ld
2495 to make gdb/nlm/* build after the compiler and linker.
2499 * config.guess (netbsd, freebsd, linux): Accept any machine,
2501 (m68k-atari-sysv4): Relocate to match FSF version.
2503 * config.guess: More merges from the FSF:
2505 Add a space before function call or macro invocation.
2509 * config.guess: Add trap cmd to remove dummy.c and dummy when
2514 * config.guess (dummy.c): Redirect stderr for `hostinfo' command.
2515 (dummy): Redirect stderr from compilation of dummy.c.
2519 * config.guess: Distinguish between NeXTStep 2.1 and 3.x.
2523 * configure: Accept and ignore --cache*, for compatibility with
2528 * config.guess: Merge from FSF:
2532 * config.guess (Pyramid*:OSx*:*:*): New case.
2533 (PATH): Add /.attbin at end for finding uname.
2534 (dummy.c): Handle i860-alliant-bsd. Follow whitespace conventions.
2538 * config.guess (M88*:DolphinOS:*:*): New case.
2542 * config.guess (AViiON:dgux:*:*): Use TARGET_BINARY_INTERFACE
2543 to select whether to use ELF or COFF.
2547 * config.guess: Recognize i860-stardent-sysv and i860-unknown-sysv.
2551 * config.guess: Guess the OS version for HPUX.
2555 * config.guess (UNAME_VERSION): Recognize aix3.2.4 and aix3.2.5.
2559 * configure.in: Recognize --with-headers, --with-libs, and
2561 * Makefile.in (all-xiberty): Depend upon all-ld.
2565 * configure.in: Change i[34]86 to i[345]86.
2569 * configure (version): A few more tweaks to help message.
2573 * Makefile.in: Remove (for now) librx as a host library,
2574 now that we're building it for target.
2583 * configure.in: Also configure librx.
2587 * Makefile.in: Update various rules to reflect that librx
2588 is now needed for libg++.
2592 * config.sub: Accept mips64orion and mips64orionel as a CPU name.
2596 * configure.in: Configure the examples directory.
2600 * configure: Simplify Jun 2 1994 change.
2604 * change CC to /usr/latest/bin/gcc for lynx host builds, since
2605 /bin/gcc isn't good enough to build gcc.
2609 * Makefile.in (GDB_SUPPORT_FILES): Remove
2610 (setup-dirs-gdb, gdb.tar.gz, make-gdb.tar.gz): Remove old rules.
2611 (gdb.tar.gz): Add new rule to use standard distribution building
2616 * configure.in: Warn about use of /usr/ucb/cc on Solaris. From
2625 * configure: Search current dir first in .gdbinit.
2629 * config.sub: Recognize freebsd (merged from gcc config.sub).
2633 * config.sub: Refer to NeXT's operating system as nextstep.
2635 * config.sub (case $basic_machine): Re-order the cases, to match
2636 the order in the FSF version (which is mostly alphabethical).
2637 Merge in some additions and changes from the FSF.
2641 * config.guess: Recognize m68k-atari-sysv4 and m88k-harris-csux7.
2642 * config.sub: Recognize cxux7.
2643 * configure.in: Use mh-cxux for m88k-harris-cxux*.
2647 * config.sub: Fix typo powerpc -> powerpc-*.
2651 * Makefile.in: `all-emacs19' depends on `all-byacc'.
2653 * Makefile.in: Add all-emacs19 and install-emacs19 rules (in
2654 parallel with all-emacs and install-emacs). Top-level command
2655 `make all-emacs19 CC=gcc' now behaves as `make all-emacs CC=gcc'.
2659 * test-build.mk ($(host)-stamp-stage2-installed): Remove
2660 $(relbindir)/make before doing ``make install'', and use
2661 $(GNU_MAKE) while doing it. Avoids problem on SunOS with
2662 installing over running make binary.
2663 ($(host)-stamp-stage3-installed): Likewise.
2667 * config.guess: Recognize Mach.
2671 * configure: Check ${exec_prefixoption}, not ${exec_prefix}, to
2672 see whether --exec-prefix was used.
2676 * README: Explicitly mention libg++/README. (Zoo's idea.)
2680 * Makefile.in: Add all-librx target similar to all-libproc.
2684 * config.guess: Rearrange tests for Alpha-OSF1 to properly deal
2685 with post 1.2 uname bogosity.
2689 * configure: Remove temporary files on receipt of a signal.
2693 * configure: If there is a package_makefile_frag, remove
2694 ${subdir}/Makefile.tem after copying it in.
2698 * build_all.mk: support rs6000 lynx identifies itself as
2699 rs6000-lynx-lynxos2.2.2. Also, use /usr/cygnus/progressive/bin/gcc
2700 since /bin/gcc is too feeble to compile a modern gcc.
2704 * brought devo/test-build.mk update-to-date with progressive/
2705 test-build.mk. Add lynx targets and hppa flag info.
2709 * configure.in: Use mh-ncrsvr43. Patch from
2714 * config.guess (i386-unknown-bsdi): No longer need to
2715 check #if defined(__bsdi__) && defined(__i386__).
2719 * configure: Set program_transform_nameoption correctly.
2723 * brought build-all.mk update-to-date with progressive build-all.mk,
2724 added new targets and hppa info.
2728 * configure: If config.guess result is a prefix of the user
2729 specified target, assume a native build and use the user specified
2730 target as the host alias. Remove SunOS patch suffix removal hack.
2731 * configure.in: Remove SunOS patch suffix removal hack.
2733 * Makefile.in (CROSS_CHECK_MODULES): Remove check-flex, since it's
2734 in NATIVE_CHECK_MODULES.
2738 * Makefile.in: Rename HOST_ONLY to NATIVE.
2739 * configure: Delete SunOs patch suffix from host_canonical
2740 and build_canonical variables that are prepended to Makefiles.
2741 * configure.in: Add comments for easier maintenance.
2745 * Makefile.in: Add all-libproc target similar to all-gui.
2749 * Makefile.in (CHECK_MODULES): split into
2750 HOST_ONLY_CHECK_MODULES and CROSS_CHECK_MODULES.
2754 * config.guess (i386-unknown-bsdi): New system to guess.
2758 * Makefile.in: Add all-gui target (but not yet build by "all").
2762 * config.sub: Move deletion of patch suffix from here...
2763 * configure.in: To here, at Ian's suggestion. The top-
2764 level scripts might need to know of a patch level.
2768 * config.sub: Strip off patch suffix so rtl is recognized
2769 as a sunos4.1.3 machine, even though it's been patched.
2773 * Makefile.in (INSTALL_LAST): Delete.
2774 (INSTALL_DOSREL): New.
2778 * configure.in: Use ld for i[34]86-*-sysv4* and sparc-*-solaris2*.
2779 Don't set use_gnu_ld to no for *-*-sysv4; that only controls
2780 whether we pass down --with-gnu-ld anyhow.
2784 * Makefile.in (INSTALL_LAST): Change operation so it works
2785 on more flavors of make.
2786 * configure.in (go32): Don't build libg++ or libio.
2790 * Makefile.in (Move HOST_PREFIX_1 and friends up so
2791 they can be overriden by templates.
2795 * configure.in (target==go32): Don't build gdb.
2796 * dosrel: New directory.
2800 * configure.in (host==go32): Configure dosrel too.
2801 * Makefile.in (INTALL_TARGET): Call INSTALL_LAST last.
2802 (HOST_CC, HOST_PREFIX, HOST_PREFIX_1): Undefine, they should
2803 be set by incoming names or templates.
2804 (INSTALL_LAST): New rule.
2805 * config/mh-go32: New fragment.
2809 * config.sub (sparclitefrw, sparclitefrwcompat): Don't set the os.
2813 * config/mh-lynxrs6k: Renamed from mh-lynxosrs6k, to make it
2814 unique in 8.3 naming schemes.
2815 * configure.in (appdirs): New variable. Currently empty, but will
2816 be used in gas distribution. If nonempty, lists a set of
2817 directories at least one of which must get configured, or top
2818 level configuration is considered to have failed.
2819 (rs6000-*-lynxos*): Use new file name.
2823 Eliminate XTRAFLAGS.
2824 * Makefile.in (CC_FOR_TARGET): If newlib exists, refer to the
2825 newlib include files using -idirafter, and also use -nostdinc.
2826 (CXX_FOR_TARGET): Likewise.
2827 (XTRAFLAGS): Removed.
2828 (BASE_FLAGS_TO_PASS): Remove XTRAFLAGS_FOR_TARGET.
2829 (EXTRA_HOST_FLAGS): Remove XTRAFLAGS.
2830 (EXTRA_TARGET_FLAGS, EXTRA_GCC_FLAGS): Likewise.
2831 ($(DO_X)): Don't pass down XTRAFLAGS.
2835 * configure.in (mips*-dec-bsd*): New target; do build linker.
2836 (mips*-*-bsd*): New target; don't build linker.
2840 * configure.in: support rs6000-*-lynxos* configuration.
2841 support sunos4 as a cross target.
2843 * config.sub: look for lynx*, not lynx since the OS version may
2844 legitimately be part of the name.
2848 * configure.in (i[34]86-*-sco*): Move to be with other i386
2850 (romp-*-*): New target. Skip various binary utilities.
2851 (vax-*-*): New target. Don't build newlib.
2852 (vax-*-vms): Renamed from *-*-vms. Don't build opcodes or newlib.
2856 * configure.in: Only set host_makefile_frag if config
2861 * install.sh: If $dstdir exists, don't check whether each
2866 * test-build.mk (HOLES): Add sleep; used by rcs/src/conf.sh.
2870 * configure.in (*-*-lynxos*): Don't configure newlib for either
2871 native or cross Lynx.
2875 * config.sub (sparc64-elf): Fix os.
2876 (z8k): Remove duplicate.
2880 * Makefile.in (gcc-no-fixedincludes): Touch gcc/include/fixed, not
2881 gcc/stmp-fixproto, to try to prevent fixproto from being run.
2885 * configure: Make file links cleanly even if Lynx fails on
2886 an NFS symlink (at least fail cleanly).
2890 * test-build.mk (CC): For mips-sgi-irix4, change -XNh1500 to
2895 * configure: Unknown options are fatal again.
2899 * configure: Ignore --x-includes and --x-libraries, for Autoconf
2904 * build-all.mk: Add `clean' target.
2908 * config.guess: Add SINIX support.
2909 * configure.in: Add mips-*-sysv4* support.
2913 * build-all.mk: Document all useful targets.
2914 If canonhost is sparc-sun-solaris2.3, change it to sparc-sun-solaris2.
2915 If canonhost is mips-sgi-irix4.0.5H, change it to mips-sgi-irix4.
2919 * configure: Support --silent, --quiet.
2923 * configure: Support --disable-FEATURE.
2927 * config.guess: Recognize NCR running SVR4.3.
2931 * config.guess: Make BSDI generate i386-unknown-bsd386.
2936 * configure.in (powerpc-*-aix*): Treat like rs6000-*-*.
2940 * configure: Make unrecognized options give nonfatal warnings
2941 instead of fatal errors, and pass them to any subdirectory
2942 configures in case they recognize them.
2943 Make --x equivalent to --with-x.
2947 * configure: Add --enable-* options. Clean up usage message and
2952 * Makefile.in (NM_FOR_TARGET): Build tree version is now nm.new.
2956 * configure.in (hppa*-*-*): Enable binutils.
2960 * config.sub: Recognize cisco.
2964 * Makefile.in (CXXFLAGS): Add -fexternal-templates.
2968 * config.guess: about target *-hitachi-hiuxwe2, don't print more
2969 than one configuration name. Add comment.
2973 * config.guess: about target *-hitachi-hiuxwe2, fixed
2974 machine guessing order. [Hitachi's CPU_IS_HP_MC68K
2975 macro is incorrect.]
2979 * Makefile.in (TAGS): Just build TAGS in each subdirectory, rather
2980 than the "make ls" stuff which used to be here.
2984 * config.guess: Recognize i[34]86-unknown-freebsd.
2989 * configure.in (noconfigdirs for alpha): Remove libg++ and libio.
2993 * config.guess: Check for ptx.
2997 * config.sub: Add os9k checking.
3001 * config.guess: Handle OSF1 running on HPPA processors
3005 * configure: If subdir configure fails, print out a message with
3006 subdirectory name, in case subdir's configure code didn't identify
3011 * configure.in: Remove embedded newlines from configdirs.
3012 Avoid mismatches of substrings. Fix matching strings at end
3015 Fri Feb 11 15:33:33 1994 Stu Grossman (grossman at cygnus.com)
3017 * config.guess: Add Lynx/rs6000 config support.
3021 * configure.in (alpha-dec-osf1*, alpha*-*-*): Build gas.
3025 * configure.in (hppa*-*-osf*): Treat this just like most other
3026 PA configurations (eg no binutils or ld).
3027 (hppa*-*-*elf*): These configurations have binutils and ld.
3035 * configure.in (rs6000-*-*): Build gas.
3039 * Makefile.in: Avoid bug in losing hpux sed.
3043 * Makefile.in, test-build.mk: Remove MUNCH_NM; it was only needed
3044 for GDB and GDB has been fixed to not need it.
3046 Mon Jan 31 18:40:55 1994 Stu Grossman (grossman at cygnus.com)
3048 * config/mh-lynxosrs6k: Account for lack of ranlib!
3052 * config.guess: Recognize vax hosts.
3056 * configure (while loop): Don't use "break 2" inside case
3057 statement -- the case statement isn't an enclosing loop.
3061 * config.guess: Clean up NeXT support, to allow nextstep
3062 on Intel machines. Make OS be nextstep.
3066 * config.guess: Add alternate forms for Convex.
3068 Thu Jan 20 16:13:41 1994 Stu Grossman (grossman at cygnus.com)
3070 * configure: Completely rewrite option processing. Take
3071 advantage of pattern-matching to avoid invoking test frequently.
3072 Also clean up host and target defaulting logic.
3076 * Makefile.in: Replace all occurrances of "rootme" with "r" and
3077 "$${rootme}" with "$$r", to increase the likelihood that the do-*
3078 commands (plus user environment) will fit SCO limits.
3082 * configure.in: Don't issue warnings about directories which are
3083 not being configured if -norecursion is set. Correct test for
3084 --with-gnu-as and --with-gnu-ld to not get confused by substring
3087 * configure.in: Don't build gas for alpha-dec-osf1*.
3089 Tue Jan 4 17:10:19 1994 Stu Grossman (grossman at cygnus.com)
3091 * configure: Back out Per's change of 12/19/1993. It changes the
3092 behavior of configure in unexpected and confusing ways.
3094 Also, use different delim char when calculating
3095 program_transform_name so that the name can contain slashes.
3099 * configure.in, config.sub: Add support for VSTa micro-kernel.
3103 * configure.in: Nuke hacks which were used to get a special
3104 version of GAS for HPPA configurations.
3108 * configure: If only ${target_alias} is given, use that
3109 as the default for ${host_alias}.
3110 * configure: Add missing back-slashes before nested quotes.
3114 * Makefile.in (BASE_FLAGS_TO_PASS): add YACC=$(BISON)
3118 * config.guess: Recognize some Tektronix configurations.
3123 * config.sub: Match any flavor of SH.
3127 * configure.in: Don't try to configure newlib for Alpha.
3131 * configure.in: Don't build ld for Irix 5. Don't build gas,
3132 libg++ or libio for any Alpha target.
3134 * configure.in (mips*-sgi-irix5*): New target; use mh-irix5.
3135 * config/mh-irix5. New file for Irix 5.
3139 * Makefile.in (GZIPPROG): Renamed from GZIP, which gzip uses for
3140 default arguments -- so it tried to compress itself.
3144 * configure.in (notsupp): ensure that a space is always at the end
3145 of the configdirs list, since the grep checks for an explicit space
3149 * configure.in (target i386-sysv4.2): don't build ld, since static
3150 versions of many libraries are not available.
3154 * config.guess: Recognize Apollos (using environment variables).
3155 * configure.in: Don't configure ld, binutils, or gprof for Apollo.
3159 * config.guess: Recognize Sony news mips running newsos.
3163 * Makefile.in (all-cygnus, build-cygnus): "fi else" needs to be
3164 "fi ; else" for bash.
3168 * Makefile.in (BASE_FLAGS_TO_PASS): pass SHELL.
3172 * config.sub: accept unixware as an alias for svr4.2.
3173 Fix some inconsistancies with the gcc version.
3177 * Makefile.in (DISTDOCDIRS): Add gdb.
3181 * Makefile.in (DISTDOCDIRS): Add libg++ and libio.
3185 * Makefile.in (taz): Only build "info" in DISTDOCDIRS.
3186 (DISTDOCDIRS): Don't assume libg++ and gdb folks necessarily want
3191 * config.sub: Accept hiux* as an OS name.
3193 * Makefile.in: Change RUNTEST_FLAGS back to RUNTESTFLAGS per
3194 etc/make-stds.texi. The underscore came from gcc, and dje now
3195 agrees that RUNTESTFLAGS is the correct name.
3199 * install.sh: Remove 'set -e'. It makes any conditionals
3200 in the script useless.
3202 * config.guess: Automatically recognize arm-acorn-riscix
3207 * Makefile.in: Change RUNTESTFLAGS to RUNTEST_FLAGS
3211 * Makefile.in (DISTDOCDIRS): New variable.
3212 (taz): Edit local Makefile.in sooner, instead of proto-toplev
3213 Makefile.in later. Build "info" and "dvi" in DISTDOCDIRS.
3217 * configure.in (hppa target): check the source directory for the
3222 * config.sub: Allow -aout* and -elf*.
3226 * configure.in: Don't build ld on i386-solaris2, same as for
3231 * Makefile.in (taz): Add texinfo/lgpl.texinfo (for libg++).
3235 * configure.in: Configure gdb for alpha.
3239 * Makefile.in (CXXFLAGS): Add -O.
3243 * config.guess: added support for DG Aviion
3247 * configure.in: Produce warning message for subdirectories not
3248 configurable for this host/target combination. Don't try to
3249 configure gdb for vms.
3253 * Makefile.in (taz): Replace "byacc" with "bison -y" in the
3254 appropriate files before making "diststuff".
3255 (DISTBISONFILES): New var: list of files to be edited.
3256 (DISTSTUFFDIRS): Add binutils.
3260 * config.sub: also handle mipsel and mips64el (for little endian mips)
3264 * configure.in: Add * to end of all OS names.
3268 * configure.in: Build newlib for LynxOS native.
3272 * config.guess: Add support for delta 88k running SVR3.
3274 * configure.in: Add comment about HP compiler vs. emacs.
3278 * configure.in: don't build ld on solaris2 (not a viable option
3279 due to bugs in getpwnam & getpwuid)
3283 * configure.in: Accept alpha-dec-osf1*, not just -osf1, since
3284 config.guess will produce a full version number.
3288 * configure.in: Build linker and binutils for alpha-dec-osf1.
3292 * Makefile.in: Remove -O from CXXFLAGS for consistency with CFLAGS,
3293 and gdb/testsuite/Makefile.in.
3297 * configure.in: recognize mips*- instead of mips-
3301 * config.sub: Accept linux*coff and linux*elf as operating
3306 * config.sub: Recognize mips64, and mips3 as an alias for it.
3310 * configure.in: Remove alpha-dec-osf*, no longer necessary now that
3311 gdb knows how to handle OSF/1 shared libraries.
3315 * configure.in: Recognize hppa*-*-hiux* (currently synonym for hpux).
3316 * config.guess: Recognize Hitachi's HIUX.
3317 * config.sub: Recognize h3050r* and hppahitachi.
3318 Remove redundant cases for hp9k[23]*.
3322 * configure.in: default to '--with-gnu-as' and '--with-gnu-ld'
3323 if gas and ld are in the source tree and are in ${configdirs}.
3324 If ${use_gnu_as} or ${use_gnu_ld} are 'no', then don't set the
3325 the --with options (but still pass them down on the command line,
3326 if they were explicitly specified).
3330 * configure: substitute SHELL value in Makefile.in with
3335 * configure.in: Build gas, ld, and binutils for *-*-sysv4* and
3336 *-*-solaris2* targets.
3340 * Makefile.in: define M4, and pass it down to sub-makes;
3341 all-autoconf now depends on all-m4
3345 * Makefile.in ({AR,RANLIB}_FOR_TARGET): make contingent on
3346 presence of {ar,ranlib} instead of a configured directory
3350 * config.guess: Accept 34?? as well as 33?? for NCR.
3354 * configure.in: grab mt-hppa for HPPA targets; use 'gas ' instead
3355 of 'gas' in sed commands, since 'gash' is now in the tree as well.
3359 * configure: grab values for $(CC) and $(CXX) from the
3360 environment, so that someone can do "CC=gcc configure; make" and
3361 have it work right (matching the way that autoconf works now)
3363 * configure.in, Makefile.in: add support for gash, the tcl
3366 * config.guess: add NetBSD variants (hp300, x86)
3370 * install.sh: Support -d option (in the manner of SunOS 4 install,
3371 as it is more deterministic than that of GNU install)
3372 (chmodcmd): Set file to mode 755 by default (should also do default
3373 chgrp and chown, but I don't feel like dealing with that now)
3377 * config.sub: Remove h8300hhms alias.
3381 * configure.in: Match *-*-solaris2* not *-sun-solaris2*.
3385 * Makefile.in (gcc-no-fixedincludes): touch stmp-fixproto as well
3390 * config.sub: recognize m88110-bug-coff.
3394 * Makefile.in (all-libio): all dependencies on the toolchain used
3395 to build this (gcc, gas, ld, etc)
3399 * config.guess: Deal with OSF/1 1.3 on alpha.
3403 * install.sh: add some 'else true' clauses for portability
3405 * configure.in: don't build libio for h8[35]00-*-* targets
3409 * Makefile.in: Add support for new libio.
3413 * install.sh: If one command fails, don't try the rest. Don't try
3414 to remove $dsttmp (via trap) unless we have already created it.
3415 If $src doesn't exist, detect it and exit with an error.
3417 * config.guess: Recognize BSD on hp300.
3421 * config.guess: Map (9000/[34]??:HP-UX:*:*) to m68k-hp-hpux.
3426 * Makefile.in (all-send-pr): depends on all-prms
3430 * config.guess: Fix typo (9000/8??:4.3bsd -> 9000/7??:4.3bsd).
3435 Added test for mips-mips-riscos5.
3439 * configure.in: use mh-hp300 for 68k HP hosts
3443 * configure: add support for CONFIG_SHELL, so that you can use
3444 some alternate shell for evaluating configure scripts
3448 * Makefile.in (make-gdb.tar.gz): Sed bug reporting address
3450 distribution archive.
3451 * Makefile.in (COMPRESS): Remove def.
3452 * Makefile.in (gdb.tar.gz, make-gdb.tar.gz): Renamed from
3453 gdb.tar.Z and make-gdb.tar.Z respectively.
3454 * Makefile.in (make-gdb.tar.gz): Now only build gzip'd archive.
3455 * Makefile.in (make-gdb.tar.gz): Minor changes to move closer
3456 to convergence with 'taz' target in Makefile.in.
3460 * install.sh (dsttmp): use trap to ensure that tmp files go
3461 away on error conditions
3465 * Makefile.in (BASE_FLAGS_TO_PASS): remove LOADLIBES
3469 * Makefile.in (install-dirs): Deal with a prefix like /gnu;
3470 its parent is '/' not ''.
3472 * Makefile.in (DEVO_SUPPORT): Add comments about ChangeLog.
3476 * configure: if ${newsrcdir}/configure doesn't exist, don't assume
3477 that ${newsrcdir}/configure.in does.
3481 * test-build.mk: support for CONFIG_SHELL
3485 * config.sub (netware): Add as a basic system type.
3489 * Makefile.in (Makefile): depend on configure.in. Also drop the
3490 $(srcdir)/ from the dependency on Makefile.in.
3494 * config.sub: Recognize h8300hhms as h8300h-hitachi-hms.
3495 (h8300hhms is temporary until multi-libraries are implemented).
3496 * configure.in: Handle h8300h too.
3500 * config.guess: Recognize dpx/2 as m68k-bull-sysv3.
3504 * configure: Remove extraneous output when guessing host type.
3505 * config.guess: Remove extraneous output when guessing using C
3506 compiler rather than uname, or when guessing fails.
3508 Wed Jul 7 17:58:14 1993 david d `zoo' zuhn (zoo at rtl.cygnus.com)
3510 * Makefile.in: remove all.cross and install.cross targets
3512 * configure: remove CROSS=-DCROSS_COMPILE and ALL=all.cross
3517 * configure.in (target sh): Build gprof.
3519 Thu Jul 1 16:52:56 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3521 * config.sub: change -solaris to -solaris2
3525 * configure.in: Use config/mh-riscos for mips-*-sysv*.
3529 * configure: Correct error message for missing Makefile.in to
3530 print correct directory.
3532 Tue Jun 29 13:52:16 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3534 * install.sh: kludge around 386BSD shell bug
3538 * config.guess: Recognize NeXT.
3539 * config.guess: Recognize i486-ncr-sysv4.
3540 * Makefile.in (taz): rm $(TOOL)-$$VER before linking.
3544 * Makefile.in (MAKEINFOFLAGS): New variable.
3545 (FLAGS_TO_PASS): Pass MAKEINFO as MAKEINFO MAKEINFOFLAGS.
3546 * build-all.mk, test-build.mk: Pass down --no-split as
3547 MAKEINFOFLAGS when hosted on DOS. Compile DOS hosted without -g.
3551 * Makefile.in (DEVO_SUPPORT): Add COPYING COPYING.LIB install.sh.
3555 * Makefile.in (libg++.tar.z): New rule.
3556 * Makefile.in (taz): Replace 'configure -rm' by 'make distclean'.
3557 * Makefile.in (taz): Only do a single chmod.
3559 Fri Jun 18 12:03:10 1993 david d `zoo' zuhn (zoo at majipoor.cygnus.com)
3561 * install.sh: don't use dirname anymore (replaced with sed usage)
3565 * Makefile.in: Change extension for gzip'd files from '.z' to
3566 '.gz' per new FSF standard usage.
3568 Thu Jun 17 16:58:50 1993 david d `zoo' zuhn (zoo at majipoor.cygnus.com)
3570 * configure: put quotes around the final value of program_transform_name
3572 Tue Jun 15 16:48:51 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3574 * Makefile.in: new install.sh support; update install-info rules
3578 * configure.in: Build diff for crosses, but not for go32 host.
3580 * configure.in: Build gprof only for native, and don't build it
3581 for mips-*-*, rs6000-*-*, or i[34]86-*-sco*.
3583 Mon Jun 7 13:12:11 1993 david d `zoo' zuhn (zoo at deneb.cygnus.com)
3585 * configure.in: don't build gas,ld,binutils on for *-*-sysv4
3589 * configure.in (host_tools): Add prms.
3591 Fri Jun 4 13:30:42 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3593 * Makefile.in: install gcc, do installation of $(INSTALL_MODULES)
3594 with $(FLAGS_TO_PASS) on the command line
3596 * config.sub: Recognize lynx and lynxos
3600 * config.sub: Accept -ecoff*, not just -ecoff.
3604 * Makefile.in (taz): Use .gz suffix instead of .z.
3605 (binutils.tar.gz, gas+binutils.tar.gz, gas.tar.gz): Fixed target
3608 Thu Jun 3 00:27:06 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3610 * Makefile.in (vault-install): add an 'else true' (for Ultrix)
3612 Wed Jun 2 18:19:16 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3614 * Makefile.in (install-no-fixedincludes): install gcc last, so
3615 that rebuilds that might happen during 'make install' don't get
3616 bogus gcc include files
3620 Change from Utah for HPPA support:
3621 * config.guess: Recognize hppa1.x-hp-bsd.
3625 * config.guess: Add support for Motorola Delta 68k, up to r3v7.
3628 Tue Jun 1 17:48:42 1993 Rob Savoye (rob at darkstar.cygnus.com)
3630 * config.sub: Add support for rom68k and bug boot monitors.
3634 * Makefile.in: Make all-opcodes depend on all-bfd.
3638 * config.guess: Added special check for i[34]86-univel-sysv4*.
3642 * config.guess: For i[34]86-unknown-sysv4 use UNAME_MACHINE for
3643 the processor rather than assuming i486.
3647 * config.guess: Recognize SunOS6 as Solaris3.
3651 * config.guess: Fix typo. Avoid #elif (not in K&R 1).
3652 Recognize SunOS 5.* only (and not [6-9].*) as being Solaris2.
3656 * build-all.mk (all-cross): New target for Canadian Cross.
3657 Added Q2 go32 targets.
3658 * test-build.mk: Configure go32 cross sparclite-aout and
3659 mips-idt-ecoff -with-gnu-ld. Moved build binary directory from
3660 PARTIAL_HOLE_DIRS to BUILD_HOLES_DIRS.
3662 Mon May 24 15:30:06 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3664 * configure.in: fix Alpha GDB typo; also, don't build DejaGnu for
3665 GO32 hosted toolchains
3667 Mon May 24 14:18:41 1993 Rob Savoye (rob at darkstar.cygnus.com)
3669 * configure: change so "-exec-prefix" gets passed down rather
3670 than "-exec_prefix" so autoconf generated Makefiles get the
3671 exec_prefix set right.
3673 Fri May 21 10:42:25 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3675 * config.guess: get the Solaris2 minor version number
3677 * Makefile.in: add standards.texi and make-stds.texi to ETC_SUPPORT
3681 * config.guess: Recognize some Sequent platforms.
3683 Thu May 20 14:33:48 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3685 * Makefile.in: added the vault-install target
3687 * configure.in: actually use the Sun3 makefile fragment that's in
3688 config, also added the release dir to configdirs
3692 * Makefile.in (taz): Fix modes on stuff in $(TOOL) dir also.
3694 Tue May 18 20:26:41 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3696 * configure.in: remove some program from Alpha targetted toolchains
3700 * Makefile.in (DISTSTUFFDIRS): Renamed from PROTODIRS. Add ld and
3702 (taz): Run "make diststuff" in those directories instead of "make
3703 proto-dir". Look for "VERSION=" only at start of line in subdir
3704 Makefile. Use "gzip -9" for compression.
3705 (TEXINFO_SUPPORT, DIST_SUPPORT, BINUTILS_SUPPORT_DIRS): New vars.
3706 (binutils.tar.z): New target.
3710 * Makefile.in (taz): Include gpl.texinfo.
3714 * Makefile.in (setup-dirs): Merged into "taz" target.
3715 (taz): Only do `proto-dir' stuff if a directory is actually needed
3720 * Makefile.in (MUNCH_NM): New variable, defined to be $(NM).
3721 (FLAGS_TO_PASS): Pass down MUNCH_NM.
3722 (HOST_CC, HOST_PREFIX, HOST_PREFIX_1): New variables.
3723 (EXTRA_GCC_FLAGS): Pass down HOST_* variables.
3724 (gcc-no-fixedincludes): Correct for current gcc Makefile.
3728 * Makefile.in (make-gdb.tar.Z): Add configure, config.guess,
3729 config.sub, and move-if-change to gdb testsuite distribution
3730 archive, so the testsuite can be extracted, configured, and
3731 run separately from the gdb distribution. Blow away the Chill
3732 tests that require a Chill compiled executable, since GNU Chill
3733 is not yet publically available.
3735 Mon May 10 17:22:26 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3737 * test-build.mk: set environment variables in a single command,
3738 instead of a list of assignments and exports
3740 * config.guess: recognize Alpha/OSF1 systems
3744 * configure: Change help message to prefer --options rather than
3749 * config.sub: Convergent Tech. "miniframe" uses m68010, sez
3751 * config.guess: Recognize miniframe.
3753 Sun May 9 17:47:57 1993 Rob Savoye (rob at darkstar.cygnus.com)
3755 * Makefile.in: Use srcroot to find runtest rather than rootme.
3756 Pass RUNTESTFLAGS and EXPECT down in BASE_FLAGS_TO_PASS.
3760 * test-build.mk: Extensive additions to support building on a
3761 machine other than the host.
3765 * configure (tooldir): Fix for i386-aix again.
3769 * configure, Makefile.in: Change definition of $(tooldir)
3774 * config.guess: Recognize i[34]86/SVR4.
3778 * Makefile.in (all-gdb): gdb depends on sim.
3782 * Makefile.in (gdb.tar.Z): Make prototype gdb testsuite directory
3783 at the same time we make the prototype gdb directory.
3784 * Makefile.in (make-gdb.tar.Z): Make the testsuite distribution
3785 files at the same time as the gdb base release distribution.
3789 * Makefile.in (check): Use individual check targets rather than
3795 * config.sub: Use sysv3.2 not sysv32 for canonical OS
3796 for System V release 3.2.
3800 * config.sub: Recognize hppaosf.
3801 * configure.in: Do configure ld/binutils/gas for it.
3805 * configure (tooldir): Alter syntax used to set this, for systems
3806 where "\$" isn't handled right, like i386-aix.
3810 * configure: Pass program-transform-name, not
3811 program_transform_name, to recursive configures.
3815 * Makefile.in (gas+binutils.tar.z): New rule for building snapshots
3820 * config.guess: Recognize AIX3.2 as distinct from 3.1.
3822 Sat Apr 17 17:19:50 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3824 * configure.in: rename m88k-motorola-m88kbcs to m88k-motorola-sysv
3826 * config/mh-delta88: remove extraneous GCC references
3830 * Makefile.in (PRMS): Set back to all-prms.
3834 * test-build.mk: Pass -with-gnu-as for known MIPS native and MIPS
3835 targets, rather than for MIPS hosts.
3837 Fri Apr 9 13:51:06 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3839 * configure.in: add comment for --with-x default values
3841 * config.guess: handle Motorola Delta88 box for SVR3 and SVR4.
3843 * Makefile.in: add check-* targets for each of the directories in
3844 the tree. Add a definition of RUNTEST that will use the one we
3845 just built, if it exists. Pass this down via FLAGS_TO_PASS.
3849 * configure.in: Removed obsolete references to bfd_target and
3850 target_makefile_frag.
3852 * build-all.mk: Set assorted targets for Q2.
3853 * config.sub: Recognize z8k-sim and h8300-hms.
3854 * test-build.mk: Really don't pass host to configure.
3855 (HOLES): Added uname.
3859 * configure: Handle an empty program-prefix, program-suffix or
3860 program-transform-name correctly.
3864 * build-all.mk: -G 8 no longer required for MIPS targets.
3865 * test-build.mk: Don't pass host argument to configure; make it
3870 * Makefile.in (gdb.tar.Z): Fix for building gzip'd distribution.
3871 * Makefile.in (COMPRESS): New macro, like GZIP.
3875 * test-build.mk: Use -with-gnu-as for mips-sgi-irix4 as well.
3877 * build-all.mk: Set GCC to gcc -O -G 8 for MIPS targets, since gcc
3878 with gas currently defaults to -G 0.
3882 * Makefile.in (all-flex): flex depends on byacc.
3884 * build-all.mk: If host not specified, use config.guess. Pass TAG
3885 to test-build.mk as RELEASE_TAG.
3886 * test-build.mk (configargs): New variable containing arguments to
3887 pass to configure. Set to -with-gnu-as on mips-dec-ultrix.
3888 (FLAGS_TO_PASS): Pass down RELEASE_TAG.
3890 * config.guess: Use /bin/uname when checking -X argument on SCO,
3891 to avoid invoking GNU uname which doesn't understand -X.
3893 * test-build.mk: Don't use /usr/unsupported/bin/as on AIX.
3895 * configure.in: Build gas for mips-*-*.
3899 * Makefile.in (all.normal): insert missing backslash.
3903 * build-all.mk, config/mh-irix4: Bump -XNh value to 1500 to match
3906 * Makefile.in: Complete overhaul to merge many almost identical
3911 * Makefile.in (setup-dirs-gdb): Renamed from setup-dirs.
3912 (gdb.tar.Z): Adjusted.
3914 * Makefile.in (setup-dirs, taz): New targets; should be general
3915 enough to adapt for gdb sometime. Build only .z file.
3916 (gas.tar.z): New target.
3920 * build-all.mk: Use CC=cc -Xs on Solaris.
3922 Mon Mar 29 19:59:26 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3924 * config/mh-sun3: cc needs -J to compile cp-parse.c correctly
3926 * config/mh-solaris: SunPRO C needs -Xs to be able to get a
3927 working xmakefile for Emacs.
3932 for handling BISON for FSF releases.
3936 * configure: Actually implement the change zoo just documented.
3938 Wed Mar 24 13:02:44 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
3940 * configure: when using config.guess, only set target_alias when
3941 it's not already been set (ie, on the command line)
3943 Mon Mar 22 23:07:39 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3945 * Makefile.in: add installcheck target, set PRMS to install-prms
3947 Sun Mar 21 16:46:12 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3949 * configure: add support for package_makefile_fragment, handle the
3950 case where a directory has a configure.in file but no Makefile.in
3951 more gracefully (with an actual understandable error message, even);
3952 add support for --without (and add this to the usage message); also
3953 explicitly add a --host=${host_alias} to the command line when
3954 config.guess is used
3958 * configure: Must use both --host and --target in recursive calls.
3962 * Makefile.in: Change deja-gnu to dejagnu.
3966 * configure.in (h8300-*-*, h8500-*-*): Don't build libg++.
3968 Fri Mar 12 18:30:14 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3970 * configure.in: canonicalize all instances to *-*-solaris2*,
3971 also strip out a number of tools to not build for go32 host
3975 * config.guess: add GPL.
3977 * Makefile.in, config.guess, config.sub, configure: bump
3982 * Makefile.in (do-info): Removed obsolete check for existence of
3985 * Makefile.in (MAKEOVERRIDES): Define to be empty.
3987 Wed Mar 10 03:11:56 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3989 * Makefile.in: a couple of 'else true' for decstation,
3992 * configure.in: configure tclX too; don't remove Tk on RS/6000 anymore
3996 * Makefile.in (setup-dirs): change invocation of make to $(MAKE).
3998 Mon Mar 8 14:52:11 1993 Ken Raeburn (raeburn@cambridge)
4000 * config.guess: Recognize i386-ibm-aix (PS/2).
4001 * configure.in: Use config/mh-aix386 file for it.
4005 * Makefile.in (GCC_FOR_TARGET): Eliminated definition; use
4006 CC_FOR_TARGET instead.
4007 (BASE_FLAGS_TO_PASS): Pass GCC_FOR_TARGET=$(CC_FOR_TARGET).
4011 * Makefile.in: Add sim to list of directories sent with gdb
4015 * configure.in: Put back mips-dec-bsd* case.
4020 * configure.in (vax-*-ultrix2*): Add Ultrix 2.2 triplet.
4021 * config.guess: Change 'VAX*:ULTRIX:*:*' to 'VAX*:ULTRIX*:*:*'.
4022 * config/mh-vaxult2: New file.
4024 Tue Mar 2 18:11:03 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4026 * configure.in: remove no-op mips-dec-bsd* in "case $target"
4028 * Makefile.in (dir.info): only run gen-info-dir if it exists,
4029 (install-info): install dir.info only if it exists,
4030 (all-expect, install-expect): pass along X11_FLAGS_TO_PASS
4034 * configure.in: For vms target, skip bfd, ld, binutils. Do build
4035 gas for mips-dec-bsd.
4039 * configure (makesrcdir): If ${srcdir} is relative and not ".",
4040 and ${subdir} is not ".", set makesrcdir based on ${invsubdir}.
4044 * configure.in: Added "dejagnu" to hosttools list.
4048 * config.sub, configure.in, config.guess: Add support
4049 for Bosx, an AIX variant from Bull.
4054 * devo/dejagnu: Initial creation of devo/dejagnu.
4055 Migrated dejagnu testcases and support files for testing software
4056 tools to reside as subdirectories, currently called "testsuite",
4057 within the directory of the software tool. Migrated all programs,
4058 support libraries, etc. beloging to dejagnu proper from
4059 devo/deja-gnu to devo/dejagnu. These files were moved "as is"
4060 with no modifications. The changes to these files which will
4061 allow them to configure, build, and execute properly will be made
4066 * Makefile.in: Change send_pr to send-pr.
4067 * configure.in: Likewise.
4068 * send_pr: Renamed directory to send-pr.
4072 * Makefile.in: Add some extra semi-colons (needed if SHELL=bash).
4076 * README: Update for gdb-4.8 release.
4077 * Makefile.in (gdb.tar.Z): Add texinfo/tex3patch. Build
4078 gdb-xxx.tar.z (gzip'd) file also.
4080 Thu Feb 18 09:16:17 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4082 * Makefile.in: make all-diff depend on all-libiberty
4086 * config.guess: add vax-ultrix in the spirit of mips-ultrix.
4088 Tue Feb 16 05:57:15 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4090 * configure.in, Makefile.in: add hello, tar, gzip, recode, indent
4094 * Makefile.in (DEVO_SUPPORT): Remove etc directory
4095 (ETC_SUPPORT): Only add the files GDB wants from etc/.
4096 (gdb.tar.Z): Use ETC_SUPPORT. Use byacc when building the file.
4098 Thu Feb 11 20:14:28 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4100 * Makefile.in: makeinfo binary is in a new location
4104 * config.sub: Accept -ecoff as an OS.
4106 * Makefile.in: Various changes to eliminate a level of make
4107 recursion and reduce the required command line length.
4108 (BASE_FLAGS_TO_PASS): New variable holding flags passed to all
4110 (EXTRA_HOST_FLAGS, EXTRA_TARGET_FLAGS, EXTRA_GCC_FLAGS): New
4111 variables holding settings for specific sub-makes.
4112 (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS, GCC_FLAGS_TO_PASS): Rewrote
4113 in terms of BASE_FLAGS_TO_PASS.
4114 (TARGET_LIBS): New variable listing directories which use
4115 TARGET_FLAGS_TO_PASS.
4116 (subdir_do): Eliminated.
4117 (do-*): New set of targets to replace subdir_do.
4118 (various): All targets which used subdir_do now depend on do-*.
4119 (local-clean): Renamed from do_clean.
4120 (local-distclean): New target, dependency of distclean and
4122 (install-info): Don't create directories. Depend on dir.info
4123 rather than calling make recursively.
4124 (install-dir.info): Eliminated.
4125 (install-info-dirs): Create all info directories here.
4126 (dir.info): Depend upon do-install-info.
4128 * test-build.mk (HOLES): Added false.
4132 * config.guess: Recognize BSDI and BSDJ (Jolitz 386bsd).
4134 Thu Feb 4 20:49:18 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4136 * Makefile.in (info): remove dependency on all-texinfo. The
4137 problem was really in texinfo/C, not at this level.
4141 * Makefile.in (info): Added dependency on all-texinfo (PR 2112).
4145 * Makefile.in (make-gdb.tar.Z): Change BISON to 'bison -y' for
4150 * configure: Include srcdir in message about target of link not
4151 being found. Don't convert `-' to `_' in `with' options being
4154 Tue Feb 2 18:57:59 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4156 * configure.in: add uudecode to host_tools
4158 * Makefile.in: added {all,install}-uudecode targets, added them to
4159 the appropriate lists
4163 * Makefile.in (all-gcc): Added dependency on all-gas.
4165 * configure.in (mips-*-*): Build ld and binutils.
4169 * configure: check return code from mkdir, print error message and
4174 * Makefile.in (make-gdb.tar.Z): New location for texinfo.tex.
4178 * test-build.mk (HOLES): Added tar, cpio and uudecode.
4182 * config.sub (h8500): Recognize this as a cpu type.
4184 Sat Jan 23 20:32:01 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4186 * configure: source directory missing is no longer a warning
4188 * configure.in: recognize irix[34]* instead of irix[34]
4190 * Makefile.in: define and pass down X11_LIB
4192 * config/mh-sco: define X11_LIB to the mess that SCO ODT requires
4196 * guess-systype: Renamed to ...
4197 * config.guess: ... by popular request.
4198 * configure.in, Makefile.in: Update accordingly.
4203 + Add Convex, Cray/Unicos, and Encore/Multimax support.
4204 + Execute ./dummy instead of assuming . is in PATH.
4208 * guess-systype: New shell script. Attempts to guess the
4209 canonical host name of the executing host.
4210 Only a few hosts are supported so far.
4211 * configure: Call guess-systype if no host is specified.
4215 * Makefile.in (gcc-no-fixedincludes): Made to work with current
4221 * Makefile.in (GCC_FLAGS_TO_PASS): New variable.
4222 (all-gcc, install-gcc, subdir_do): Use it.
4226 * Makefile.in: Rename uninstalled gcc driver from gcc to xgcc.
4230 * Makefile.in: Removed explicit setting of SUBDIRS. SUBDIRS is now
4231 set exclusively by configure, using configure.in .
4233 Wed Jan 6 13:44:11 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4235 * test-build.mk: set $PATH for all builds
4237 * Makefile.in: pass TARGET_FLAGS_TO_PASS for xiberty and libm
4241 * Makefile.in (GCC_FOR_TARGET): Supply a default that matches
4242 the one used in gcc/Makefile.in, so that a null expansion doesn't
4243 override the one needed to build gcc with a native cc.
4248 * configure: Accept -with arguments.
4252 * Makefile.in: added h8300sim
4256 * config/mh-sco: Don't override BISON definition.
4258 * build-all.mk: If canonhost is i386-unknown-sco3.2v4, change it
4259 to i386-sco3.2v4. Set TARGETS and CFLAGS for i386-sco3.2v4.
4260 (all-cygnus, native, build-cygnus): Make
4261 $(canonhost)-stamp-3stage-done, not $(host)....
4262 * test-build.mk (stamp-3stage-compared): Use tail +10c for
4263 i386-sco3.2v4. Added else true to if command.
4267 * config.sub: (from FSF) Sequent uses a BSD-like OS.
4271 * configure.in (i[34]86-*-isc*): added; uses mh-sysv.
4273 Thu Dec 24 17:26:24 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4275 * configure.in: don't remove binutils from Solaris builds
4279 * Makefile.in: get rid of earlier definitions for *clean,
4280 also handle the recursive info rule better
4284 * Makefile.in (mostlyclean, distclean, realclean): Fix to
4285 do more-or-less the right thing.
4289 * Makefile.in: Add lines defining CC and CXX, and use CXX rather
4290 than gcc in definitions of CXX_FOR_BUILD and CXX_FOR_TARGET.
4292 Tue Dec 15 00:34:32 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4294 * Makefile.in: change all $(host_cpu)-$(host_vendor)-$(host_os) to
4297 * configure.in: split the configdirs list into 4 categories (native
4298 v. cross, library v. tool) and handle the cross-only and native-
4299 only in more reasonable (and correct!) way.
4301 Mon Dec 14 17:04:22 1992 Stu Grossman (grossman at cygnus.com)
4303 * configure.in (hppa*-*-*): Don't remove bfd and gdb from
4306 Sun Dec 13 00:37:26 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4308 * Makefile.in: extensive cleanup:: removed all of the explicit
4309 clean-* targets, collapsed many wrappers around subdir_do into
4310 one, added additional targets to satisfy standards.texi, deleted
4311 some old targets, some changes for consistency
4313 Fri Dec 11 20:18:02 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4315 * configure.in: handle some programs as cross-only, and others as
4318 * test-build.mk: handle partial holes in a more generic manner
4320 * Makefile.in: m4 depends on libiberty
4322 Mon Dec 7 06:43:27 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4324 * config/mh-sco: don't default $(CC) to gcc
4326 Thu Dec 3 21:52:11 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4328 * configure.in: add m4, textutils, fileutils, sed, shellutils,
4329 time, wdiff, and find to configdirs
4331 * Makefile.in: all, clean, and install rules for the new programs
4332 added to configure.in
4334 Mon Nov 30 14:54:34 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4336 * configure.in: use mh-sun for all *-sun-* hosts
4338 * config/mh-solaris: rework standard X location to use
4339 $OPENWINHOME, if defined.
4341 * config/mh-sun: handle X11 include locations
4343 * config/mh-decstation: define NeedFunctionPrototypes to 0, to
4344 work around dain-bramaged DECwindows include files
4346 Fri Nov 27 18:35:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4348 * Makefile.in: define flags for X11 include files and library file
4349 locations, pass them down to the programs that need this info
4351 * build-all.mk: added a 'native' target, to 3stage the native toolchain
4353 * config/{mh-hpux,mh-solaris}: define the "standard" locations for
4354 the vendor supplied X11 headers and libraries
4356 Sun Nov 22 18:59:13 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4358 * configure.in: start building libg++ for HP-UX targets
4362 * README: Update references to files moved into etc/.
4366 * config.sub (i386sol2, i486sol2): i[34]86-unknown-solaris2.
4367 * configure.in (i[34]86-*-solaris2*): Use config/mh-sysv4.
4371 * configure: accept dash as well as underscore in long option
4372 names for FSF compatibility.
4376 * config.sub: added -sco3.2v4 support from FSF.
4378 Sun Nov 8 21:14:30 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4380 * configure.in: expand the section that adds or removes
4381 directories from the list of programs to build, to handle native
4382 vs. cross in addition to host v. native
4386 * Makefile.in: Replace C++ in macro names with CXX.
4387 This is less likely to break ...
4389 Sat Nov 7 15:16:58 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4391 * test-build.mk: add -w to GNU_MAKE
4393 Fri Nov 6 23:10:37 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4395 * config.sub: remove 'sparc'-->'sparc-sun' default transformation,
4396 add 'sparc' to list of recognized cpus. This needed to make
4397 'sparc-aout' expand to 'sparc-unknown-aout' instead of 'sparc-sun-aout'.
4398 Delete some redundant ose68 variants. Recognize -wrs as an os,
4399 then changes that into $CPU-wrs-vxworks.
4401 * configure.in: remove most references to gdbtest, regularize
4402 target based program removal
4404 * test-build.mk: import from p3 tree (many fixes and changes)
4408 * Makefile.in: added rules to handle tcl, tk, and expect
4410 * configure.in: handle those directories if they exist
4412 Thu Nov 5 14:35:41 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4414 * config.sub: removed bogus hppabsd and hppahpux names, since
4415 "hppa" is not a valid cpu (hppa1.1 or hppa1.0 are, though)
4417 Thu Oct 29 00:12:41 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4419 * Makefile.in: all-gcc now depends on all-binutils. all-libg++
4420 depends upon all-xiberty
4422 * Makefile.in: changes from p3, including:
4426 * Makefile.in (XTRAFLAGS): include newlib directories if
4427 newlib/Makefile exists, rather than if host != target.
4431 * Makefile.in: added -nostdinc to XTRAFLAGS if we are using gcc
4432 from the same source tree and not building a cross-compiler. This
4433 matters for the libg++ configuration if reconfiguring a tree that
4434 has already been installed.
4438 * Makefile.in: added -I for newlib/targ-include to XTRAFLAGS, to
4439 pick up the machine and system specific header files.
4441 * Makefile.in: added AS_FOR_TARGET, passed down in
4442 TARGET_FLAGS_TO_PASS. Added CC_FOR_BUILD, which is intended to be
4443 the C compiler to use to create programs which are run in the
4444 build environment, set it to default to $(CC), and passed it down
4445 in FLAGS_TO_PASS and TARGET_FLAGS_TO_PASS.
4449 * Makefile.in: add $(host) = $(target) tests back to *_FOR_TARGET.
4450 We need them for unusual native builds, like systems without
4453 * configure: also define $(host_canonical) and
4454 $(target_canonical), which are the full, canonical names for the
4455 given host and target
4459 * Makefile.in: Added separate definitions for C++.
4463 * configure.in (configdirs): Add deja-gnu.
4467 * README: Update for configure.texi and gdb-4.7 release.
4471 * Makefile.in: Move "all" target to top of file.
4472 Previously, first target was ".PHONY" which caused BSD4.4 make
4473 to build .PHONY when make was run without arguments.
4477 * Makefile.in: Add COPYING.LIB to GDB releases, now that there's
4478 Library-copylefted code in libiberty.
4482 * config.sub: Replace m68kmote with plain old m68k.
4486 * Makefile.in: Remove space from blank line, avoid Make complaints.
4490 * config.sub: Complain if no argument is given. Added support for
4491 386bsd as OS and target alias.
4495 * Makefile.in (XTRAFLAGS): include newlib directories if
4496 newlib/Makefile exists, rather than if host != target.
4498 Mon Oct 5 03:00:09 1992 Mark Eichin (eichin at tweedledumber.cygnus.com)
4500 * config.sub: recognize sparclite-wrs-vxworks.
4502 * Makefile.in (install-xiberty): added *-xiberty make rules (from
4503 p3.) Added clean-xiberty to clean.
4505 Thu Oct 1 17:59:19 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4507 * configure.in: use *-*-* instead of nested cases for host and target
4511 * Makefile.in: added -nostdinc to XTRAFLAGS if we are using gcc
4512 from the same source tree and not building a cross-compiler. This
4513 matters for the libg++ configuration if reconfiguring a tree that
4514 has already been installed.
4518 * config.sub (i486v/i486v4): Merge in from FSF version.
4522 * configure: only set PWD if it is already set.
4526 * configure: just set PWD=`pwd` at the top, since Ultrix sh
4527 doesn't have unset and all success paths (and most error paths)
4528 out set it anyway. (Note: should change all uses of ${PWD=`pwd`}
4529 to just ${PWD} to avoid confusion.)
4533 * configure: always set $(tooldir) to $(libdir)/$(target_alias),
4534 even for a native compilation.
4538 Changes to make the gdb.tar.Z rule work better.
4540 * Makefile.in (GDB_SUPPORT_DIRS): Add opcodes.
4541 (DEVO_SUPPORT): Add configure.texi.
4542 (bfd-ilrt.tar.Z): Remove ancient rule.
4546 * Makefile.in: added -I for newlib/targ-include to XTRAFLAGS, to
4547 pick up the machine and system specific header files.
4549 * configure.in, config.sub: added new target m68010-adobe-scout,
4550 with alias of adobe68k. Changed configure.in to check for
4551 -scout before -sco* to avoid a false match.
4553 * Makefile.in: added AS_FOR_TARGET, passed down in
4554 TARGET_FLAGS_TO_PASS. Added CC_FOR_BUILD, which is intended to be
4555 the C compiler to use to create programs which are run in the
4556 build environment, set it to default to $(CC), and passed it down
4557 in FLAGS_TO_PASS and TARGET_FLAGS_TO_PASS.
4561 * Makefile.in: added TARGET_FLAGS_TO_PASS, CC_FOR_TARGET,
4562 AR_FOR_TARGET, RANLIB_FOR_TARGET, NM_FOR_TARGET. Pass
4563 TARGET_FLAGS_TO_PASS, which defines CC, AR, RANLIB and NM as the
4564 FOR_TARGET variants, to newlib and libg++.
4568 * Makefile.in (all-gas, all-gdb): Require all-opcodes to be built
4573 * config.sub: Accept `elf' as an environment.
4577 * Makefile.in (all-opcodes): cd into the right directory
4581 * configure: added -program_transform_name option, used as
4582 argument to sed when installing programs.
4583 configure.texi: added documentation for -program_prefix,
4584 -program_suffix and -program_transform_name.
4588 * config.sub: Accept i486 where i386 ok.
4592 * config.sub: accept we32k
4596 * config.sub, configure.in: accept OSE68000 and OSE68k.
4598 * Makefile.in: don't create all directories for ``make install'';
4599 let the subdirectories create the ones they need.
4601 Tue Aug 11 23:13:17 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4603 * COPYING: new file, GPL v2
4605 Tue Aug 4 01:12:43 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4607 * Makefile.in: use the new gen-info-dir, which needs a template
4608 argument (which also lives in texinfo)
4610 * configure.texi, standards.texi: fix INFO-DIR-ENTRY
4612 Mon Aug 3 15:41:28 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4614 * config/mh-solaris: removed the -xs from CFLAGS (let the people
4615 with Sun's C compiler deal with it themselved)
4619 * config.sub (ncr3000): Change i386 to i486.
4621 Thu Jul 23 00:12:17 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4623 * Makefile.in: add install-rcs, install-grep to
4624 install-no-fixedincludes, removed install-bison and install-libgcc
4628 * configure.in: grab the HPUX makefile fragment if on HPUX
4632 * Makefile.in: eradicate bison spoor (ditto libgcc).
4633 configure.in: recognise m68{k,000}-ericsson-OSE.
4634 es1800 is alias for m68k-ericsson-OSE
4636 Sun Jul 19 17:49:02 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4638 * configure.in: rearrange the parts that remove programs from
4639 configdirs, based now on HOST==TARGET or by canonical triple.
4643 * test-build.mk: recurse explicitly with -f test-build.mk when
4644 appropriate. predicate stage3 and comparison on the existence
4645 of gcc. That is, if gcc isn't around, we aren't three-staging.
4646 On very clean, also remove ...stamp-co. Build in-place before
4651 * Makefile.in, configure.in: add tgas
4655 * Makefile.in: a number of changes merged in from progressive.
4657 * configure.in: add libm.
4659 * .cvsignore: ignore some stuff that comes from test-build.mk.
4661 Wed Jul 8 00:01:30 1992 Stu Grossman (grossman at cygnus.com)
4663 * config/mh-solaris: Use -xs when compiling so that Sun-C puts
4664 a symbol-table into the executable.
4668 * config.sub: Add es1800 (m68k-ericsson-es1800).
4672 * configure: Add program_suffix (parallel to program_prefix)
4673 * Makefile.in: adjust directory-creating script for losing decstation
4677 * configure: Minor $subdir-related fixes.
4681 * configure: fix various problems with propogating
4682 makefile_target_frag in subdirs.
4683 * configure.in: config libgcc if its there
4685 Fri Jun 19 15:19:40 1992 Stu Grossman (grossman at cygnus.com)
4687 * config.sub: HPPA merge.
4691 * config/mh-ncr3000 (INSTALL): Don't use /usr/ucb/install,
4692 it is broken on ncr 3000's.
4694 Sun Jun 14 10:29:19 1992 John Gilmore (gnu at cygnus.com)
4696 * Makefile.in: Replace all-bison with all-byacc in all
4697 dependency lines for other tools (which now use byacc).
4699 Fri Jun 12 22:21:57 1992 John Gilmore (gnu at cygnus.com)
4701 * config.sub: Add sun4sol2 => sparc-sun-solaris2.
4703 Tue Jun 9 17:18:11 1992 Fred Fish (fnf at cygnus.com)
4705 * config/{mh-ncr3000, mh-sysv4}: Add INSTALL.
4709 * Makefile.in: make gprof rules similar to byacc rules (instead of
4710 vestigal $(unsubdir) that didn't work...)
4714 * config.sub: Add support for Linux.
4715 * Makefile.in: Use $(FLAGS_TO_PASS) more consistently
4716 (at least for libg++).
4720 * configure.texi: fix doc for the -nfp option to configure
4724 * Makefile.in (all-binutils): ar needs flex, so depend on all-flex.
4726 Sun May 31 15:04:08 1992 Mark Eichin (eichin at cygnus.com)
4728 * config.sub: changed [^-]+ to [^-][^-]* so that it works under
4729 Sun sed. (BSD 4.3 sed doesn't handle [^-]+ either.)
4730 * configure.in: added solaris* host_makefile_frag hook.
4732 Sun May 31 01:10:34 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4734 * config.sub: changed recognition of m68000 so that various
4735 m68k types can be specified via m680[01234]0
4737 Sat May 30 21:01:06 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4739 * config.sub (basic_machine): fix sed so that '-foo' isn't
4740 completely substituted out while .+'-foo' loses the '-foo'
4744 * config.sub ($os): Add -aout.
4748 * configure: If host_makefile_frag is absolute, don't
4749 prefix ${invsubdir} (relevant to libg++ auto-configure).
4753 * Makefile.in (tooldir): Define it.
4754 (all-ld): Depend on all-flex.
4758 * Makefile.in (check): Fix libg++ special case.
4762 * configure: do not bury `pwd` into config.status, thus do fewer
4765 * configure: print the "Building in" message only when building in
4766 other than "." AND verbose.
4768 * configure: remove -s, rework -v to better accomodate guested
4771 * standards.texi: updated to 3 may, fixed librid <-> libdir typo.
4775 * Makefile.in: macroize flags passed on recursion. remove
4780 * configure: get makesrcdir right for subdirs deeper than 1.
4782 * Makefile.in: pass INSTALL, INSTALL_DATA, INSTALL_PROGRAM on
4787 * Makefile.in: don't print subdir_do or recursion lines.
4791 * standards.texi: added menu item.
4793 * Makefile.in: build and install standards.info.
4795 * standards.texi: new file.
4799 * configure: test for and move config.status pieces from
4804 * config/mh-delta88, config/mh-ncr3000: Replace MINUS_G with
4805 CFLAGS per new configuration strategy.
4806 * configure: Test for existance of files before trying to mv
4807 them, to avoid numerous non-existance messages.
4811 * configure: correct final line of config.status.
4813 * configure: patch from eggert. Avoids a protection problem if
4814 the original Makefile.in is read only.
4816 * configure: use move-if-change from gcc to create config.status.
4817 Some makefiles depend on config.status to tell if a directory
4818 has been reconfigured for a different host. This change
4819 prevents those directories from remaking everything in the case
4820 where the reconfig was only intended to rebuild a Makefile.
4822 * configure: test for config.sub with "config.sub sun4" rather
4823 than "config.sub ${host_alias}". Otherwise we can't tell a bad
4824 host alias from a missing config.sub.
4828 * Makefile.in: explicitly pass CFLAGS on recursion. no longer pass
4829 MINUS_G (this can be done with CFLAGS). Default CFLAGS to -g.
4833 * configure: mkdir ${subdir} as needed.
4837 * Makefile.in,configure.in: added autoconf.
4841 * Makefile.in: no longer pass against on recursion.
4843 * Makefile.in: added .NOEXPORT: so that stray makefile_frag
4844 definitions are not inherited.
4846 * configure: correct makesrcdir when subdir is .
4850 * configure: Add support for 'subdirs' variable, which is
4851 like 'configdirs', except that configure doesn't re-invoke
4852 itself for subdirs, it just creates a Makefile for each subdir.
4853 * configure.texi: Document subdirs.
4855 Mon Apr 13 18:50:16 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4857 * configure.in: added flex to configdirs
4861 * Makefile.in: remove clean-stamps from clean.
4863 Sat Apr 11 03:52:03 1992 John Gilmore (gnu at cygnus.com)
4865 * configure.in: Add gdbtest to configdirs.
4869 * Makefile.in (MINUS_G): Add macro, default to -g, pass on
4871 * configure.in: Recognize new ncr3000 config.
4875 * Makefile.in, configure.in: removed references to gdbm.
4879 * config.sub: Don't canonicalize os value
4880 newsos* to bsd (readline needs to check for newsos).
4881 (This fix was earlier made Jan 31, but got re-broken.)
4883 Mon Apr 6 14:34:08 1992 Stu Grossman (grossman at cygnus.com)
4885 * configure.in: sco is an os, not a vendor!
4887 * configure: Quote $( better. Keep various shells happy.
4891 * Makefile.in: eliminate stamp-files.
4895 * Makefile.in: add send_pr. remove "force" from .stmp-gprof rule.
4896 Supress echoing of all the "if [ -d ... $(MAKE)" lines.
4900 * config.sub: fix iris/iris3.
4904 * configure: re-add -rm.
4908 * Maskefile.in: add .stmp-rcs to all.
4910 * configure.in: remove gas from rs6000 build, use aix host fragment.
4914 * configure: pass down site_option during recursion.
4916 Thu Mar 19 16:49:36 1992 Stu Grossman (grossman at cygnus.com)
4918 * Makefile.in (all.cross): Add .stmp-bfd .stmp-readline.
4922 * configure: Change exec_prefix so that it really defaults to prefix.
4926 * Makefile.in, configure.in: Add support for mmalloc library.
4930 * Makefile.in: add stmp dependencies for a few more things.
4934 * configure: adjusted error message on objdir/srcdir configure
4935 collision, per john's suggestion.
4937 * Makefile.in: add libiberty stmp to all and all.cross.
4941 * Makefile.in: remove force dependencies, add grep to all.
4945 * Makefile.in: drop flex. make stamp files work.
4947 * configure: added test for conflicting configuration in srcdir,
4948 remove trailing slashes from srcdir. Otherwise emacs gdb mode
4949 gets cranky. use relative paths for configure and srcdir
4950 whenever possible. Send some error messages to stderr that were
4955 * Makefile.in: Fix libg++ rule to check for gcc directory
4956 before using gcc/gcc. Also pass XTRAFLAGS.
4958 Thu Mar 5 21:45:07 1992 K. Richard Pixley (rich@sendai)
4960 * Makefile.in: added stmp-files so that directories aren't polled
4961 when they are already built.
4963 * configure.texi: fixed a node pointer problem.
4965 Thu Mar 5 12:05:58 1992 Stu Grossman (grossman at cygnus.com)
4967 * config.sub configure.in config/mh-irix4 gdb/configure.in
4968 gdb/mips-tdep.c gdb/mipsread.c gdb/procfs.c gdb/signame.h
4969 gdb/tm-irix3.h gdb/tm-mips.h gdb/xm-irix4.h gdb/config/mt-irix3
4970 gdb/config/mh-irix4 texinfo/configure.in: Port to SGI Irix-4.x.
4974 * configure: -recurring becomes -silent. corrected help message
4977 * Makefile.in: mkdir $(exec_prefix) and $(tooldir).
4981 * configure: when building Makefile for crosses, replace
4982 tooldir and program_prefix. default srcdir from location of
4983 config.sub. remove "for host in hosts" and "for target in
4988 * Makefile.in: Do not pass bindir or mandir to cvs.
4992 * Makefile.in, configure.in: removed traces of namesubdir,
4993 -subdirs, $(subdir), $(unsubdir), some rcs triggers. Forced
4994 copyrights to '92, changed some from Cygnus to FSF.
4996 * configure.texi: remove most references to multiple hosts,
4997 multiple targets, subdirs, etc.
4999 * configure.man: removed rcsid. reference config.sub not
5002 * Makefile.in: mkdir $(infodir) on install-info.
5004 Wed Feb 19 15:41:13 1992 John Gilmore (gnu at cygnus.com)
5006 * configure.texi: Explain better about .gdbinit and about
5007 the environment that configure.in sections run in.
5009 Fri Feb 7 07:55:00 1992 John Gilmore (gnu at cygnus.com)
5011 * configure.in: Ultrix is only a decstation if it's a MIPS.
5013 Fri Jan 31 21:54:51 1992 John Gilmore (gnu at cygnus.com)
5015 * README: DOC.configure => cfg-paper.texi.
5017 Fri Jan 31 21:48:18 1992 Stu Grossman (grossman at cygnus.com)
5019 * config.sub (near case $os): Don't convert newsos* to bsd!
5021 Fri Jan 31 02:27:32 1992 John Gilmore (gnu at cygnus.com)
5023 * Makefile.in: Reinstall change from gdb-4.3 that reduces
5024 the number of copies of COPYING that go into the GDB tar file.
5026 Thu Jan 30 16:17:30 1992 Stu Grossman (grossman at cygnus.com)
5028 * bfd/configure.in, config/mh-sco, gdb/config/mh-i386sco,
5029 gdb/config/mt-i386v32, gdb/configure.in, readline/configure.in:
5030 Fix SCO configuration stuff.
5032 Tue Jan 28 23:51:07 1992 Per Bothner (bothner at cygnus.com)
5034 * Makefile.in: For libg++, make sure the -I pointing
5035 to the gcc directory goes *after* all the libg++-local -I flags.
5036 Also, move just-gcc dependency from just-libg++ to all-libg++.
5038 Tue Jan 28 12:56:24 1992 Stu Grossman (grossman at cygnus.com)
5040 * configure: Change -x to -f to keep Ultrix /bin/test happy.
5042 Sat Jan 18 17:45:11 1992 Stu Grossman (grossman at cygnus.com)
5044 * Makefile.in (make-gdb.tar.Z): Remove texinfo targets.
5046 Sat Jan 18 17:03:21 1992 Fred Fish (fnf at cygnus.com)
5048 * config.sub: Add stratus configuration frags. Also
5051 Sat Jan 18 15:35:29 1992 Stu Grossman (grossman at cygnus.com)
5053 * Makefile.in (DEV_SUPPORT): add configure.man.
5055 * config.sub(Decode manufacturer-specific): add -none*.
5057 Fri Jan 17 17:58:05 1992 Stu Grossman (grossman at cygnus.com)
5059 * Makefile.in: remove form feeds to make Sun's make happy.
5060 (DEVO_SUPPORT): DOC.configure => cfg-paper.texi.
5062 Sat Jan 4 16:11:44 1992 John Gilmore (gnu at cygnus.com)
5064 * Makefile.in (AR_FLAGS): Make quieter.
5066 Thu Jan 2 22:57:12 1992 John Gilmore (gnu at cygnus.com)
5068 * configure.in: Add libg++.
5069 * configure: When verbose, don't output the command line at each
5070 level; it will be unremarkably the same as the previous version,
5071 which will be the same as what the user typed.
5073 Fri Dec 27 16:26:47 1991 K. Richard Pixley (rich at cygnus.com)
5075 * configure.in, Makefile.in: fix clean-info, add flex. add
5078 * configure: be less sensitive to spaces in Makefile.in. Do not
5079 look for sources in "..". Doing so breaks subdirectories that
5080 might have their own configure. If a subdir has it's own
5081 configure script, use it.
5083 Thu Dec 26 16:30:26 1991 K. Richard Pixley (rich at cygnus.com)
5085 * cfg-paper.texi: some changes suggested by rms.
5087 Thu Dec 26 10:13:36 1991 Fred Fish (fnf at cygnus.com)
5089 * config.sub: Merge in some small additions from the FSF version,
5090 taken from the gcc distribution, to bring the Cygnus and FSF
5091 versions into closer sync.
5093 Fri Dec 20 11:34:18 1991 Fred Fish (fnf at cygnus.com)
5095 * configure.in: Changed svr4 references to sysv4.
5097 Thu Dec 19 15:54:29 1991 K. Richard Pixley (rich at cygnus.com)
5099 * configure: added -V for version number option.
5101 Wed Dec 18 15:39:34 1991 K. Richard Pixley (rich at cygnus.com)
5103 * DOC.configure, cfg-paper.texi: revised, updated, and texinfo'd.
5104 renamed from DOC.configure to cfg-paper.texi.
5106 Mon Dec 16 23:05:19 1991 K. Richard Pixley (rich at rtl.cygnus.com)
5108 * configure, config.subr, config.sub: config.subr is now
5111 Fri Dec 13 01:17:06 1991 K. Richard Pixley (rich at cygnus.com)
5113 * configure.texi: new file, in progress.
5115 * Makefile.in: build info file and install the man page for
5118 * configure.man: new file, first cut.
5120 * configure: find config.subr again now that configuration "none"
5121 has gone. removed all traces of the -ansi option. removed all
5122 traces of the -languages option.
5124 * config.subr: resync from rms.
5126 Wed Dec 11 22:25:20 1991 K. Richard Pixley (rich at rtl.cygnus.com)
5128 * configure, config.sub, config.subr: merge config.sub into
5129 config.subr, call the result config.subr, remove config.sub, use
5132 * Makefile.in: revised install for dir.info.
5134 Tue Dec 10 00:04:35 1991 K. Richard Pixley (rich at rtl.cygnus.com)
5136 * configure.in: add decstation host makefile frag.
5138 * Makefile.in: BISON now bison -y again. also install-gcc on
5139 install. clean-gdbm on clean. infodir belongs in datadir.
5140 Make directories for info install. Build dir.info here then
5143 Mon Dec 9 16:48:33 1991 K. Richard Pixley (rich at rtl.cygnus.com)
5145 * Makefile.in: fix for bad directory tests.
5147 Sat Dec 7 00:17:01 1991 K. Richard Pixley (rich at rtl.cygnus.com)
5149 * configure: \{1,2\} appears to be a sysv'ism. Use a different
5150 regexp. -srcdir relative was being handled incorrectly.
5152 * Makefile.in: unwrapped some for loops so that parallel makes
5153 work again and so one can focus one's attention on a particular
5156 Fri Dec 6 00:22:08 1991 K. Richard Pixley (rich at rtl.cygnus.com)
5158 * configure: added PWD as a stand in for `pwd` (for speed). use
5159 elif wherever possible. make -srcdir work without -objdir.
5160 -objdir= commented out.
5162 Thu Dec 5 22:46:52 1991 K. Richard Pixley (rich at rtl.cygnus.com)
5164 * configure: +options become --options. -subdirs commented out.
5165 added -host, -datadir. Renamed -destdir to -prefix. Comment in
5166 Makefile now at top of generated Makefile. Removed cvs log
5167 entries. added -srcdir. create .gdbinit only if there is one
5170 * Makefile.in: idestdir and ddestdir go away. Added copyrights
5171 and shift gpl to v2. Added ChangeLog if it didn't exist. docdir
5172 and mandir now keyed off datadir by default.
5174 Fri Nov 22 07:38:11 1991 K. Richard Pixley (rich at rtl.cygnus.com)
5176 * Freshly created ChangeLog.
5183 version-control: never