3 * configure.in: Add cygmon and libstub support for mn10200.
7 * Makefile.in (grep): Grep no longer depends on libiberty.
11 * Makefile.in: all-snavigator needs all-libgui.
15 * configure.in: Add cygmon and libstub support for mn10300.
19 * missing: Update to version from automake 1.3.
21 * ltmain.sh: On installation, don't get confused if the same name
22 appears more than once in the list of library names.
26 * config.sub: Accept m68060 and m5200 as CPU names.
30 * configure: Use && rather than using -a in test, because odd
31 strings can confuse test.
32 * configure.in: Likewise.
36 * ltconfig, ltmain.sh: Bring in Visual C++ support.
40 * COPYING.LIB: Update FSF address.
44 * ltconfig, ltmain.sh: Update to libtool 1.2a.
46 * Makefile.in (GASB_SUPPORT_DIRS): Remove intl; already included via
51 * ltconfig, ltmain.sh: Avoid producing a version number if
52 -version-info was not used.
57 * Makefile.in: Add dependencies for boehm-gc to libjava.
62 * configure.in: Add --with-newlib to CONFIG_ARGUMENTS if we are
67 * Makefile.in (EXTRA_GCC_FLAGS): Remove backslash at end;
68 Solaris `make' causes it to continue to next definition.
73 * Makefile.in: Added dependencies to all-target-boehm-gc and
74 all-target-libjava to have them configure during the build.
80 * Makefile.in (install-gdbtk): Call this 'install-gdb' so that
81 the right GUI libraries and files are installed along with GDB.
86 * configure.in: Change alpha to alpha* in several places.
90 * config.sub: Recognize sparc86x.
94 * configure: Set CXXFLAGS from CXXFLAGS, not CFLAGS.
99 * Makefile.in: Added standard targets for `flexlm'.
100 Added intermodule dependency for `all-snavigator'.
102 * configure.in: Include `flexlm' as a host library.
107 * ltconfig: Update cygwin32 support.
109 * Makefile.in (GAS_SUPPORT_DIRS): Add intl.
110 (BINUTILS_SUPPORT_DIRS, GASB_SUPPORT_DIRS): Likewise.
111 (GDB_SUPPORT_DIRS): Likewise.
115 * configure.in (target_makefile_frag): If --enable-target-optspace,
116 use -Os to compile target libraries rather than -O2. Default to
117 using -Os for d10v and m32r if --{enable,disable}-target-optspace is
120 * configure.in (target_cflags): Ditto for d30v.
125 * Makefile.in (all-bfd): Depend on all-intl.
126 (all-binutils): Likewise.
128 (all-gprof): Likewise.
134 * Makefile.in (ALL_TARGET_MODULES): Added libjava, boehm-gc.
135 (CONFIGURE_TARGET_MODULES): Likewise.
136 (CHECK_TARGET_MODULES): Likewise.
137 (INSTALL_TARGET_MODULES): Likewise.
138 (CLEAN_TARGET_MODULES): Likewise.
139 (all-target-libjava): New target.
140 (all-target-boehm-gc): Likewise.
141 * configure.in (target_libs): Added libjava, boehm-gc.
146 * configure.in (host_tools): Fix typo, lbtool -> libtool.
150 * Makefile.in (all-bfd): Depend upon all-libiberty.
152 * ltconfig, ltmain.sh: Bring in newer cygwin32 support.
156 * Makefile.in: Add libstub.
158 * configure.in: Ditto. Build libstub for targets that have cygmon
163 * configure.in: Don't set PICFLAG on ix86-cygwin32.
167 * configure.in: Recognise i[3456]96-*-sysv5* as a valid host, and
168 use mh-sysv5 if specified. Support gprof on SCO Open Server.
172 * ltconfig: Add cygwin32 support.
174 * Makefile.in, configure.in: Add libtool as a native only directory
175 to configure and build.
179 * Makefile.in (EXTRA_GCC_FLAGS): XFOO lines shortened.
183 * Makefile.in: add ash make rules
184 * configure.in: add ash to native_only and host_tools lists
189 * Makefile.in: Add libidetcl, like libide.
190 (all-libide): Remove dependencies on all-tcl, all-tk, all-itcl,
192 * configure.IN: Add libidetcl, like libide.
193 * configure (GDB_TK): If enable_ide, add all-libidetcl.
198 * Makefile.in (all-gettext, all-intl): New targets.
199 (ALL_MODULES): Added all-gettext, all-intl.
200 (CROSS_CHECK_MODULES): Added check-gettext, check-intl.
201 (INSTALL_MODULES): Added install-gettext, install-intl.
202 (CLEAN_MODULES): Added clean-gettext, clean-intl.
204 * configure.in (host_tools): Added gettext.
205 (native_only): Likewise.
206 (noconfigdirs) [various cases]: Likewise.
207 (host_libs): Added intl.
212 * configure: Do not disable building gdbtk for cygwin32 hosts.
217 * Makefile.in: Revert yesterday's change.
218 (all-target-winsup): all-target-librx stays out of here.
222 * Makefile.in (TARGET_CONFIGDIRS, ALL_TARGET_MODULES,
223 CONFIGURE_TARGET_MODULES, CHECK_TARGET_MODULES,
224 INSTALL_TARGET_MODULES, CLEAN_TARGET_MODULES, all-target-winsup):
225 Remove references to librx and libg++.
229 * Makefile.in (BASE_FLAGS_TO_PASS): Pass $(lispdir) down to
234 * Makefile.in (CC_FOR_TARGET): Use $(TARGET_SUBDIR) when passing -B
235 for newlib directory.
236 (CXX_FOR_TARGET): Likewise.
240 * ltconfig: Update after libtool/ltconfig.in change for
245 * ltconfig, ltmain.sh: Update to libtool 1.2.
249 * configure.in: Add Thumb-pe target.
252 * Makefile.in - changed sn targets to snavigator
253 * configure.in - changed sn targets to snavigator
257 * config-ml.in: After building symlink tree call make distclean
258 if a Makefile got linked into ${ml_dir}/${ml_libdir}; this happens
259 to be the case for libiberty.
263 * config.sub: Accept alphapca56 and alphaev6 properly.
265 start-sanitize-vr4320
268 * config.sub (mips64vr4320-unknown-elf) : Added.
274 * config.sub (sco5): Fix typo.
278 * Makefile.in (INSTALL_MODULES): Move install-tcl before
280 (install-itcl): Remove dependency on install-tcl.
284 * configure.in: Remove libgloss from noconfigdirs for MN10300.
288 * configure: Don't let builds be done in source tree.
292 * configure.in: Don't build libgui for a cygwin32 target when not on
297 * configure (redirect): Set to null, so default behavior of
298 configure is now --verbose.
302 * ltmain.sh (mkdir): Check that the directory doesn't exist
303 before we exit with error, so that we don't get races during
308 * ltconfig, ltmain.sh: Update from libtool 1.0i.
312 * configure.in (host_tools, native_only): Add libtool.
316 * configure.in: add target-gperf to noconfigdirs for Cygwin32.
317 Fix typo in ming config comment.
321 * ltconfig, ltmain.sh: Update from libtool 1.0h.
325 * config.sub: Add tic30 cases, and map c30 to tic30.
329 * configure.in: Remove expect from noconfigdirs when target
330 is cygwin32. OK to build expect and dejagnu with Canadian
336 * configure.in: Add dvp-elf support.
337 * config.sub: Recognize dvp cpu.
342 * configure.in: Do build expect, dejagnu, and cvssrc for a cygwin32
345 * config.guess: Use ${UNAME_MACHINE} rather than i386 for cygwin32
350 * Makefile.in (BASE_FLAGS_TO_PASS): Remove passing $(local_prefix)
351 here as it is not defined in the toplevel Makefile.
355 * configure (package_makefile_rules_frag): New variable, which names
356 a file with generic rules, ...
357 Change comment to mention we now have FIVE parts.
358 * configure: Undo last change.
362 * config.guess: More accurate determination of HP processor types.
363 * config.sub: More accurate determination of HP processor types.
367 * configure (package_makefile_frag): Move inserting the
368 ${package_makefile_frag} to where it should be according
373 * config.guess: Add support for Linux/ARM.
377 * .cvsignore: Remove *-info and *-install since they match
378 release-info and mpw-install, which we don't want to just ignore.
382 * Makefile.in (FLAGS_TO_PASS): Pass down gcc_include_dir and
383 local_prefix to sub-make invocations.
387 * configure.in: Check makefile fragments in the source
392 * configure.in: check whether host and target makefile
393 fragments exist before adding them to *_makefile_frag
397 * configure.in (target_configdirs): Add cygmon for sparc64-elf.
401 * configure.in: Make sure we only replace RPATH_ENVVAR on
402 lines which begin with RPATH_ENVVAR, i.e. add "^" to the
405 * Makefile.in (BASE_FLAGS_TO_PASS): Pass RRPATH_ENVVAR down
410 * config-ml.in (multi-do): LDFLAGS must include multilib
415 * config.guess: Recognize i[3456]-i586-UnixWare7-sysv5.
419 * config.sub: Add mingw32 support.
420 * configure.in: Likewise.
421 * mh-mingw32: New file.
425 * configure.in: Finalize support for {alpha|powerpc}*-*-linux-gnulibc1
429 * Makefile.in (INSTALL_TARGET): Do install-gcc first.
430 * configure (gxx_include_dir): Provide a definition for subdirs
431 which do not use autoconf.
435 * config.guess: Sync with egcs. Picks up new alpha support,
436 BeOS & some additional linux support.
440 * config.guess: HP 9000/803 is a PA1.1 machine.
442 start-sanitize-vr5400
445 * config.sub (mips64vr5xxx-elf): Handle. Treat as mips64vr5000-elf.
451 * configure.in (host_makefile_frag, target_makefile_frag):
452 Handle multiple config files.
453 (alpha-*-linux*): Treat alpha-*-linux* as alpha-*-linux* and
463 * configure: Only put libide in GDB_TK if --enable-ide.
469 * configure.in (d30v-*-*): Allow configuring of libide, vmake, etc.
474 * Makefile.in: Add libgui directory.
475 (GDB_TK): Add all-libgui.
476 * configure.in: Add libgui directory.
477 * configure: Add all-libgui to GDB_TK.
481 * config-ml.in (multidirs): Add m32r to multilib list.
485 * Makefile.in (all-target-gperf): Change dependency to
486 all-target-libstdc++.
490 Source directory cvs renamed to cvssrc:
491 * configure.in (host_tools): Change cvs to cvssrc.
492 (native_only): Likewise.
493 (noconfigdirs) [various cases]: Likewise.
494 * Makefile.in (ALL_MODULES): Change all-cvs to all-cvssrc.
495 (CROSS_CHECK_MODULES): Change check-cvs to check-cvssrc.
496 (INSTALL_MODULES): Change install-cvs to install-cvssrc.
497 (CLEAN_MODULES): Change clean-cvs to clean-cvssrc.
498 (all-cvssrc): Rename target from all-cvs.
502 * configure.in (noconfigdirs): Add support for Thumb target.
504 * config.sub (maybe_os): Add support for Thumb target.
509 * configure (GDB_TK): add all-libide to dependency list
513 * configure.in (host_libs): Build libide all of the time.
514 (noconfigdirs): Remove libide from all places that set noconfigdirs.
518 * Makefile.in (all-vmake): remove double dependency on all-libide
523 * Makefile.in: Add rules for cygmon.
525 * configure.in: Build cygmon for sparc-elf and sparclite-aout.
529 * Makefile.in, configure, configure.in, ChangeLog: merge with foundry's
534 * ltmain.sh: If mkdir fails, check whether the directory was created
535 anyhow by some other process.
540 * configure.in (d30v-*-*): Configure all directories.
544 * configure.in (d30v-*-*): Configure newlib, libiberty directories
549 * configure.in (d30v-*-*): Configure target-libgloss on the D30V.
554 * include/libiberty.h: Add extern "C" { so it can be used with C++
556 * include/remote-sim.h: Add extern "C" { so it can be used with C++
562 * config.sub: Move tx19 configury to reduce spurious differences
569 * config.sub: Move tx49 configury to reduce spurious differences
576 * configure.in (d30v-*-*): Configure GCC now.
582 * config.sub: Add tx49 configury.
588 * Makefile.in (install-foundry): New target.
593 * configure.in: Remove a "second pass" of tweaking noconfigdirs,
598 * Makefile.in: check-target-libio depends on all-target-libstdc++.
600 start-sanitize-vr5400
603 * config.sub (maybe_os): Add mips64vr5400.
608 * makefile.vms: Fix to work with DEC C.
613 * Makefile.in (all-jstools): Depend on all-tix.
618 * config.sub: Add mips-tx39-elf to marketing names.
622 * ltmain.sh: Handle symlinks in generated script.
626 * configure: Handle autoconf style directory options: --bindir,
627 --datadir, --includedir, --infodir, --libdir, --libexecdir,
628 --mandir, --oldincludedir, --sbindir, --sharedstatedir,
630 * Makefile.in (sbindir, libexecdir, sysconfdir): New variables.
631 (sharedstatedir, localstatedir, oldincludedir): New variables.
632 (BASE_FLAGS_TO_PASS): Pass down bindir, datadir, includedir,
633 infodir, libdir, libexecdir, localstatedir, mandir, oldincludedir,
634 sbindir, sharedstatedir, and sysconfdir.
639 * configure.in (d30v): Remove tcl, tk, expect, gdb, itcl, tix, db,
640 sn, and gnuserv from noconfigdirs.
645 * ltmain.sh: Tweak shell pattern to avoid bug in NetBSD /bin/sh.
650 * configure (tooldir): enable_gdbtk=YES for cygwin32, NO for
651 windows. Consistent with gdb/configure.
656 * config/mt-linux: Define CXXFLAGS to make sure -fvtable-thunks is
658 * configure.in: Name Linux target fragment.
660 * configure: Rewrite so that project Makefile fragment is inserted
661 first and appears last in the resulting Makefile.
665 * Makefile.in (install-itcl): Install tcl first.
669 * config/mh-cygwin32: ok to build split texinfo files
673 * configure.in: remove bison from noconfigdirs for Cygwin32 host
677 * config.guess: Merge with FSF.
681 * config.sub: Add "marketing-names" patch.
684 * config.sub: Add tx19/r1900.
689 * configure.in (*-*-rtems*): Do not build libgloss for rtems.
694 * Makefile.in (GDB_TK): Add all-libide.
699 * ltconfig: Set CONFIG_SHELL in libtool.
700 * ltmain.sh: Use CONFIG_SHELL instead of /bin/sh
704 * Makefile.in (all-sim): Depends on all-readline.
708 * Makefile.in (BISON, YACC): Use $$s.
709 (all-bison): Depend on all-texinfo.
713 * Makefile.in (BISON): Add -L flag.
719 * configure.in (noconfigdirs): Add support for v850e target.
721 * config.sub (maybe_os): Add support for v850e target.
725 * configure.in (noconfigdirs): Add support for v850ea target.
727 * config.sub (maybe_os): Add support for v850ea target.
732 * config.sub: Add mipstx39. Delete r3900.
737 * Makefile.in (all-vmake): Depends on all-tix.
742 * Makefile.in (all-autoconf): Depends on all-texinfo.
746 * config-ml.in ({powerpc,rs6000}*-*-*): Update to current AIX and
751 * configure: Get CFLAGS and CXXFLAGS from Makefile, if possible.
753 * configure: When handling a Canadian Cross, handle YACC as well as
754 BISON. Just set BISON to bison. When setting YACC, prefer bison.
755 * Makefile.in (all-bison): Depend upon all-texinfo.
758 * Makefile.in (all-vmake): Depend upon all-tix.
763 * Makefile.in (BISON): bison, not byacc or bison -y.
764 (YACC): bison -y or byacc or yacc.
765 (various): Add *-bison as appropriate.
766 (taz): No need to mess with BISON anymore.
770 * configure: If OSTYPE matches *win32*, try to find a good value for
776 * Makefile.in, configure.in: Handle jstools like vmake.
781 * Makefile.in (taz): Get the version number from AM_INIT_AUTOMAKE in
782 configure.in if it is present.
786 * Makefile.in (LD_FOR_TARGET): Change ld.new to ld-new.
790 * config.sub: Recognize `arc' cpu.
791 * configure.in: Likewise.
792 * config-ml.in: Likewise.
796 * Makefile.in ($(INSTALL_X11_MODULES)): Depend upon installdirs.
800 * configure: Changed sed delimiter from ':' to '|' when
801 attempting to substitute ${config_shell} for SHELL. On
802 NT ${config_shell} may contain a ':' in it.
806 * Makefile.in (EXTRA_GCC_FLAGS): Fix for non-bash shells.
810 * Makefile.in (AS_FOR_TARGET): Change as.new to as-new.
814 * Makefile.in (NM_FOR_TARGET): Change nm.new to nm-new.
816 * ylwrap: If the program is a relative path, force it to be
821 * configure (tooldir): Set BISON to `bison -y' and not just bison.
825 * Makefile.in (CC_FOR_TARGET): When winsup/Makefile present,
826 correctly specify the target build directory $(TARGET_SUBDIR)/winsup
831 * Makefile.in (EXTRA_GCC_FLAGS): Fix handling of macros with values
837 * Makefile.in (DEVO_SUPPORT): Add ylwrap.
839 * ltmain.sh: Handle /bin/sh at start of install program.
841 * Makefile.in (DEVO_SUPPORT): Add ltconfig, ltmain.sh, and missing.
843 * ltconfig, ltmain.sh: New files, from libtool 1.0.
844 * missing: New file, from automake 1.2.
848 * Makefile.in: Treat tix like tk, putting it in X11_MODULES. Add
849 check-tk to CHECK_X11_MODULES.
853 * config.sub: Merge with FSF.
857 * config.guess: Merge with FSF.
861 * configure: Treat msdosdjgpp like go32.
862 * configure.in: Likewise. Don't remove gprof for go32.
864 * configure: Change Makefile.tem2 to Makefile.tm2.
868 * configure.in (noconfigdirs): For alpha-dec-osf*, don't ignore grep.
872 * install-sh (chmodcmd): Set to null if the DST directory already
873 exists. Same as Nov 11th change.
877 * configure (GDB_TK): Needs itcl and tix.
881 * config.guess: Update from FSF.
885 * Makefile.in (GDB_TK): Depend on itcl and tix.
889 * Makefile.in (INSTALL_PROGRAM_ARGS): New variable.
890 (INSTALL_PROGRAM): Use $(INSTALL_PROGRAM_ARGS).
891 (INSTALL_SCRIPT): New variable.
892 (BASE_FLAGS_TO_PASS): Pass down INSTALL_SCRIPT.
893 * configure.in: If host is *-*-cygwin32*, set INSTALL_PROGRAM_ARGS
895 * install-sh: Add support for -x option.
899 * configure.in, Makefile.in: Treat tix like itcl.
903 * Makefile.in (WINDRES): New variable.
904 (WINDRES_FOR_TARGET): New variable.
905 (BASE_FLAGS_TO_PASS): Add WINDRES_FOR_TARGET.
906 (EXTRA_HOST_FLAGS): Add WINDRES.
907 (EXTRA_TARGET_FLAGS): Add WINDRES.
908 (EXTRA_GCC_FLAGS): Add WINDRES.
909 ($(DO_X)): Pass down WINDRES.
910 ($(CONFIGURE_TARGET_MODULES)): Set WINDRES when configuring.
911 * configure: Treat WINDRES like DLLTOOL, and WINDRES_FOR_TARGET like
916 * configure.in: configure sim before gdb for win32-x-ppc
920 Move gperf into the toplevel, from libg++.
921 * configure.in (target_tools): Add target-gperf.
922 (native_only): Add target-gperf.
923 * Makefile.in (all-target-gperf): New target, depend on
925 (configure-target-gperf): Empty rule.
926 (ALL_TARGET_MODULES): Add all-target-gperf.
927 (CONFIGURE_TARGET_MODULES): Add configure-target-gperf.
928 (CHECK_TARGET_MODULES): Add check-target-gperf.
929 (INSTALL_TARGET_MODULES): Add install-target-gperf.
930 (CLEAN_TARGET_MODULES): Add clean-target-gperf.
934 * config.sub (mn10200): Recognize new basic machine.
938 * configure.in: Don't set ENABLE_MULTILIB, so we'll be passing
939 --enable-multilib down to subdirs; setting TARGET_SUBDIR was enough.
943 * configure.in: If we're building mips-sgi-irix6* native, turn on
944 ENABLE_MULTILIB and set TARGET_SUBDIR.
948 * Makefile.in (all-sn): Depend on all-grep.
952 * configure.in: Use mh-ppcpic and mt-ppcpic for powerpc*-* targets.
954 * configure: Set CFLAGS and CXXFLAGS, and substitute them into
956 * Makefile.in: Add comment for CFLAGS and CXXFLAGS.
958 * Makefile.in (DISTBISONFILES): Remove.
959 (taz): Don't futz with DISTBISONFILES. Change BISON to use
962 * configure.in: Build itl, db, sn, etc., when building for native
965 * Makefile.in (LD): New variable.
966 (EXTRA_HOST_FLAGS): Pass down LD.
971 * Makefile.in (INSTALL): Use $(SHELL) when executing install-sh.
975 * configure.in (targargs): Strip out any supplied --build argument
976 before adding our own. Always add --build.
980 * configure.in (targargs): Pass --build if we're doing
985 * configure: Use '|' instead of ":" as the seperator in
986 sed. Otherwise sed chokes on NT path names with drive
987 designators. Also look for "?:*" as the leading characters in an
992 * config.sub: Support for r3900.
996 * configure.in: Use install-sh, not install.sh.
1000 * Makefile.in (taz): Improve check for BISON so it doesn't try to
1005 * Makefile.in (INSTALL_MODULES): Put install-opcodes before
1010 * Makefile.in: Add automake targets.
1011 * configure.in (host_tools): Add automake.
1016 * Makefile.in (all-libide): Depend upon all-ilu.
1021 * configure: Default CXX to c++, not gcc.
1022 * Makefile.in (CXX): Set to c++, not gcc.
1023 (CXX_FOR_TARGET): When cross, transform c++, not gcc.
1028 * Makefile.in: Add ILU targets.
1029 * configure.in (host_tools): Add ILU.
1034 * install-sh: try appending a .exe if source file doesn't
1039 * configure.in: Turn on multilib by default.
1040 (cross_only): Remove target-libiberty.
1042 * Makefile.in (all-gcc): Don't depend on libiberty.
1047 * configure.in (host_tools): Added vmake.
1052 * config.guess: improve algorithm for recognizing Gnu Hurd x86.
1056 * Makefile.in (DEVO_SUPPORT): Add mpw-install.
1057 (DISTBISONFILES): Add ld/Makefile.in
1061 * configure.in: if target is cygwin32 but host isn't cygwin32,
1062 don't configure gdb tcl tk expect, not just gdb.
1066 * configure.in: Added gnuserv everywhere sn appears.
1068 * Makefile.in (ALL_MODULES): Added all-gnuserv.
1069 (CROSS_CHECK_MODULES): Added check-gnuserv.
1070 (INSTALL_MODULES): Added install-gnuserv.
1071 (CLEAN_MODULES): Added clean-gnuserv.
1072 (all-gnuserv): New target.
1077 * configure.in (host_libs): Added libide.
1078 Skip libide, vmake if no X. Also skip these everywhere that sn is
1081 * Makefile.in (ALL_MODULES): Added all-vmake, all-libide.
1082 (CROSS_CHECK_MODULES): Added check-vmake, check-libide.
1083 (INSTALL_MODULES): Added install-vmake, install-libide.
1084 (CLEAN_MODULES): Added clean-vmake, clean-libide.
1085 (all-vmake, all-libide): New targets.
1090 * config.guess: Fixes for MIPS OpenBSD systems.
1094 * Makefile.in (INSTALL_XFORM): Remove.
1095 (BASE_FLAGS_TO_PASS): Remove INSTALL_XFORM.
1097 * mkinstalldirs: New file, copied from automake.
1098 * Makefile.in (installdirs): Rename from install-dirs. Use
1099 mkinstalldirs. Change all users.
1100 (DEVO_SUPPORT): Add mkinstalldirs.
1104 * install-sh: Rename from install.sh.
1105 * Makefile.in (INSTALL): Change install.sh to install-sh.
1106 (DEVO_SUPPORT): Likewise.
1108 * configure: Use ${config_shell} with ${moveifchange}. From Thomas
1113 * config.guess: Recognize OpenBSD systems correctly.
1117 * README, Makefile.in (ETC_SUPPORT): Remove references to
1118 cfg-paper*, configure.{texi,man,info*}._
1122 * Makefile.in (all.normal): Ensure that gcc is built after all
1123 the x11 - ie gdb - targets.
1127 * makefile.vms: Don't run conf-a-gas.
1131 * configure.in (hppa1.1-*-rtems*): New target, like hppa-*-*elf*.
1133 start-sanitize-tic80
1136 * configure.in: Remove noconfigdirs case since gdb also
1137 configures and builds for tic80-coff.
1142 * configure: Set cache_file to config.cache.
1143 * Makefile.in (local-distclean): Remove config.cache.
1147 * COPYING: Update FSF address.
1149 start-sanitize-tic80
1152 * configure.in (tic80-*-*): Remove G++ libraries and libgloss from
1158 * Makefile.in (install-dirs): Don't crash if prefix, and hence
1163 * config.sub: Tweak mn10300 entry.
1167 * configure.in (host_tools): Put sim before gdb, so gdb's
1168 configure.tgt can determine if the simulator was configured.
1172 * config.sub: Move BeOS $os case to be with other Cygnus
1177 * config.sub: Remove misplaced comment that broke Linux.
1181 * config.sub: Add BeOS support.
1185 * Makefile.in (CHECK_X11_MODULES): Don't run check-tk.
1189 * configure.in (noconfigdirs): Remove tcl and tk from
1190 noconfigdirs for cygwin32 builds.
1192 start-sanitize-tic80
1195 * configure.in (tic80-*-*): Remove ld from noconfigdirs.
1200 * Makefile.in (GAS_SUPPORT_DIRS, BINUTILS_SUPPORT_DIRS): Remove
1201 make-all.com, use makefile.vms instead.
1205 * config.sub: Accept -lnews*.
1210 * configure.in (noconfigdirs): Disable target-newlib,
1211 target-examples and target-libiberty for d30v.
1214 start-sanitize-tic80
1217 * configure.in (host_libs): Build itcl after tcl, tk.
1219 * configure.in (host_libs): Added db, itcl.
1220 (host_tools): Added sn.
1221 (noconfigdirs): Added itcl, db, sn in appropriate places.
1222 (native_only): Added sn.
1224 * Makefile.in (all-db, all-sn): New targets.
1225 (ALL_MODULES): Added all-sn.
1226 (CROSS_CHECK_MODULES): Added check-sn.
1227 (INSTALL_MODULES): Added install-sn.
1228 (CLEAN_MODULES): Added clean-sn.
1234 * configure.in (noconfigdirs): Enable ld for d30v.
1237 start-sanitize-tic80
1240 * configure.in (tic80-*-*): Build compiler.
1246 * configure.in (d30v-*): Remove sim directory from list of
1247 unsupported d30v directories
1253 * config.sub, configure.in: Add d30v target cpu.
1258 * makefile.vms: New file.
1259 * make-all.com: Remove.
1263 * Makefile.in (EXTRA_GCC_FLAGS): Add LIBGCC2_DEBUG_CFLAGS.
1265 start-sanitize-r5900
1268 * config.sub, configure.in: add r5900
1273 * Makefile.in (all-itcl): The rule is all-itcl, not all-tcl.
1277 * Makefile.in (ALL_MODULES): Added all-db.
1278 (CROSS_CHECK_MODULES): Addec check-db.
1279 (INSTALL_MODULES): Added install-db.
1280 (CLEAN_MODULES): Added clean-db.
1284 * config.guess: Merge with latest FSF sources.
1288 * Makefile.in (ALL_MODULES): Added all-itcl.
1289 (CROSS_CHECK_MODULES): Added check-itcl.
1290 (INSTALL_MODULES): Added install-itcl.
1291 (CLEAN_MODULES): Added clean-itcl.
1295 * configure.in: build gdb for mn10200
1299 * Makefile.in (all-target-winsup): Depend on all-target-libio.
1301 start-sanitize-tic80
1304 * configure.in (tic80-*-*): Turn off most targets right now.
1309 * Makefile.in (MAKEINFO): Check for the existence of the Makefile,
1310 rather than the makeinfo program.
1311 (do-info): Depend upon all-texinfo.
1315 * configure.in: Remove uses of config/mh-linux.
1317 * config.sub, config.guess: Merge with latest FSF sources.
1319 start-sanitize-tic80
1322 * config.sub (case $basic_machine): Add tic80 entries.
1327 * config.sub, config.guess: Merge with latest FSF sources.
1331 * mpw-build.in: Build ld before gcc, use NewFolderRecursive.
1332 * mpw-config.in: Test for NewFolderRecursive.
1333 * mpw-install: Use symbolic name for startup filename.
1334 * mpw-README: Add various additional details.
1338 * configure.in (mips*-sgi-irix6*): Remove binutils from noconfigdirs.
1342 * configure.in: Do build gcc and the target libraries for
1347 * configure.in: don't avoid building gdb for mn10300 any more
1348 * Makefile.in: double-quote GCC_FOR_TARGET line in EXTRA_GCC_FLAGS
1349 instead of single-quoting it.
1353 * configure.in: Don't use --with-stabs on IRIX 6.
1357 * configure.in (m32r): Build gdb, libg++ now.
1361 * configure.in (mips*-sgi-irix6*): Remove gdb and related
1362 directories from noconfigdirs.
1366 * config.sub (basic_machine): added mips16 configuration
1370 * config.sub: Handle d10v-unknown.
1374 * gcc/depragmaize.c: Handle MSDOS's (non-unix) text files.
1378 * config.sub: Handle v850-unknown.
1382 * Makefile.in: add findutils
1383 * configure.in: add findutils to list of host_tools
1387 * config.sub: Handle mn10200 and mn10300.
1391 * configure.in (d10v-*): Do not build librx.
1395 * configure.in (mn10300): Build everything except gdb & libgloss.
1399 * config.guess: Patch for Dansk Data Elektronik servers,
1402 For ncr, use /bin/uname rather than uname, since GNU uname does not
1405 Patch for MIPS R4000 running System V,
1408 Fix thinko for nextstep.
1413 * config.guess: Guess mips-dec-mach_bsd4.3.
1416 * config.guess (i?86-ncr-sysv*): Emit just enough of the minor
1418 * config.guess (mips-mips-riscos*): Emit just enough of the
1422 * config.guess (sparc-auspex-sunos*): Added.
1423 (f300-fujitsu-*): Added.
1426 * config.guess: Recognize a Tadpole as a sparc.
1430 * config.guess: Don't assume that NextStep version is either 2 or
1431 3. NextStep 4 (aka OpenStep 4) has come out now.
1435 * config.guess: Support Cray T90 that reports itself as "CRAY TS".
1440 * config.sub: Contributions from bug-gnu-utils to:
1441 Support plain "hppa" (no version given) architecture, reported by
1443 OpenBSD like NetBSD.
1444 LynxOs is not a hardware supplier.
1446 * config.guess: Contributions from bug-gnu-utils to add support for:
1447 OpenBSD like NetBSD.
1449 More Pyramid systems.
1450 i[n>4]86 Intel chips.
1451 M680[n>4]0 Motorola chips.
1452 Use unknown instead of lynx for hardware manufacturer.
1456 * install.sh (chmodcmd): Set to null if the DST directory already
1461 * configure.in (powerpc*-{eabi,elf,linux,rtem,sysv,solaris}*): Do
1462 not use mt-ppc target Makefile fragment any more.
1466 * configure.in (*-*-windows): Exclude everything but those dirs
1467 needed to build windows.
1471 * Makefile.in (all-target-winsup): Depend on all-target-librx.
1475 * configure.in: Exclude mmalloc from i386-windows.
1476 * config/mh-windows: Add rules for building MSVC makefiles.
1480 * Undo my previous change.
1484 * Makefile.in (EXTRA_GCC_FLAGS): Pass down GCC_FOR_TARGET
1486 (MAKEOVERRIDES): Define (revert this part of October 18 change).
1490 * Makefile.in (FLAGS_TO_PASS): Add $(HOST_FLAGS) to allow the
1491 host to add it's own flags.
1492 * config/mh-windows (HOST_FLAGS): Set srcroot, which is needed
1493 for MSVC build procedure.
1497 * configure: Handle GCC_FOR_TARGET like CC_FOR_TARGET.
1501 * Makefile.in (CC_FOR_TARGET): Check for xgcc, not Makefile.
1502 (CXX_FOR_TARGET): Likewise.
1503 (GCC_FOR_TARGET): Define.
1504 (BASE_FLAGS_TO_PASS): Remove GCC_FOR_TARGET.
1505 (EXTRA_GCC_FLAGS): Define GCC_FOR_TARGET based on whether
1506 CC_FOR_TARGET was specified on the command line.
1507 (MAKEOVERRIDES): Don't define.
1511 * configure.in (m32r): Fix spelling of libg++ libs.
1515 * config.sub (-apple*): Remove, now redundant.
1519 * configure: Don't get confused by CPU-VENDOR-linux-gnu.
1521 * configure: Rework yesterday's sed script patch.
1523 * config.sub: Merge with FSF.
1527 * config.guess: Merge from FSF.
1530 * config.guess: Use pc instead of unknown, for pc clone systems.
1531 Change linux to linux-gnu.
1534 * config.guess: Avoid non-portable tr syntax.
1538 * test-build.mk (HOLES): Add "xargs" for gdb.
1540 * configure: Avoid hpux10.20 sed bug.
1544 * configure.in config/mh-windows: Add support for windows host
1545 (that is a build done under the Microsoft build environment).
1549 * Makefile.in: Replace all uses of srcroot with s, to shrink
1550 command line lengths.
1553 * configure.in: If configuring for newlib, pass --with-newlib to
1555 * Makefile.in (CC_FOR_TARGET): If winsup/Makefile exists, pass a
1556 -Bnewlib/ and -Lwinsup to gcc.
1557 (CXX_FOR_TARGET): Likewise.
1561 * Makefile.in (ETC_SUPPORT): Add configure.
1565 * configure.in: Use config/mh-dgux386 for i[345]86-dg-dgux
1566 host configuration file.
1570 * configure.in: Break mn10x00 support into separate
1571 mn10200 and mn10300 configurations.
1572 * config.sub: Likewise.
1576 * configure.in: Add lots of stuff to noconfigdirs for
1577 the mn10x00 targets.
1579 * config.sub, configure.in: Add mn10x00 support.
1583 * make-all.com: Call conf-a-gas, not config-a-gas.
1587 * configure.in (noconfigdirs): Don't build libgloss for arm-coff
1592 * mpw-README: Add much more detail for native PowerMac.
1593 * mpw-install: New file.
1594 * mpw-configure: Add --norecursion and --help options.
1595 * mpw-config.in: Translate readme and install files when
1597 * mpw-build.in: Don't always depend on byacc and flex.
1598 (install-only-top): New action.
1602 * configure.in: You can now configure GDB for the v850.
1606 * configure.in (noconfigdirs): Don't configure any C++ dirs
1611 * config.sub: Recognize mips64vr5000.
1615 * configure.in: Use a single line for host_tools and native_only.
1619 * config.sub, configure.in: Add entries for m32r.
1623 * Makefile.in (inet-install): Don't run install-gzip.
1627 * configure.in: Don't config lots of things for *-*-windows*.
1631 * mpw-config.in: Test for mpw-true, true, and null-command scripts.
1632 (host_libs, host_tools): Copy from configure.in.
1633 * mpw-configure: Don't complain about directories not found.
1637 * configure.in (i[345]86): Recognize i686 for pentium pro.
1638 (i[3456]86-*-dgux*): Use config/mh-sysv for the host configuration
1641 * config.guess (i[345]86): Ditto.
1645 * configure.in (noconfigdirs): Removed gdb for D10V.
1649 * configure.in: Remove ld, target-libio, target-libg++, and
1650 target-libstdc++ from noconfigdirs.
1654 * configure: Fix three locations where shell scripts were
1655 being run directly rather than with config_shell.
1659 * configure.in (v850-*-*): Set up initial $noconfigdirs.
1660 * config.sub (basic_machine): Recognize v850.
1664 * mpw-configure: Handle multiple enable/disable options and
1665 pass them down recursively, handle -c and -s flags appropriately
1666 depending on choice of compiler, add escape mechanism for
1667 quoted arguments to gC.
1671 * configure.in (powerpc*-*-*): For eabi, system V.4, Linux, and
1672 solaris targets, use config/mt-ppc to set C{,XX}FLAGS_FOR_TARGETS
1673 so that -mrelocatable-lib and -mno-eabi are used.
1675 * Makefile.in (CONFIGURE_TARGET_MODULES): If target compiler does
1676 not support --print-multi-lib, don't abort.
1680 * config/mh-cygwin32 (CFLAGS): Define _WIN32 to be compatible
1681 with normal Windows compilation environment.
1685 * make-all.com: Run config-a-gas.
1686 * setup.com: Don't copy subdirectory files around.
1690 * configure.in (*-*-ose): Remove exclusion of libgloss for this
1691 target, it now compiles correctly.
1695 * mpw-config.in: Generate Mac include for elf/dwarf2.h.
1699 * configure.in (d10v-*-*): Remove ld from $noconfigdirs.
1703 * configure.in (native_only): Add prms.
1707 * Makefile.in (GAS_SUPPORT_DIRS): Add make-all.com and setup.com.
1708 (BINUTILS_SUPPORT_DIRS): Likewise.
1712 * configure.in (d10v-*-*): Don't configure ld or gdb until the
1713 d10v support is added.
1717 * configure.in (d10v-*-*): New target.
1721 * config.guess (HP 9000/811): Recognize this as a PA1.1
1726 * Makefile.in (do-tar-gz): New target, split out from tail end of
1727 taz target. Run each command separately, don't use pipes.
1732 * mpw-configure: Look for g-mpw-make.sed in config/mpw.
1733 * mpw-build.in: No builds should depend on building byacc or flex,
1734 they are assumed to be installed already.
1738 * Makefile.in (CONFIGURE_TARGET_MODULES): Set r environment
1739 variable that CC_FOR_TARGET needs.
1743 * Makefile.in (CONFIGURE_TARGET_MODULES): Determine if the multlib
1744 options have changed since the last time the subdirectory was
1745 configured, and if it has, reconfigure.
1746 (CLEAN_TARGET_MODULES): Delete multilib.out and tmpmulti.out, which
1747 CONFIGURE_TARGET_MODULES uses to remember the old multilib options.
1751 * Makefile.in (ALL_MODULES,CROSS_CHECK_MODULES,INSTALL_MODULES,
1752 CLEAN_MODULES): Add bash.
1753 (all-bash): New target.
1757 * configure.in (mips-sgi-irix6*): Use mh-irix6 instead of mh-irix5.
1761 * config.sub (basic_machine): Recognize d10v as a valid processor.
1765 * mpw-configure: Add support for --bindir.
1766 * mpw-build.in: Use a GCC-specific build script for GCC actions.
1770 * configure.in: add bash, time, gawk to list of hosttools and things
1771 to only build for native toolchains
1775 * Makefile.in (docdir): Remove.
1779 * Makefile.in (datadir): Set to $(prefix)/share.
1783 * configure.in: build diff and patch for cygwin32-hosted
1788 * config.sub: Accept -rtems*.
1792 * configure.in: enable dosrel for cygwin32-hosted builds,
1793 remove diff from the list of things not buildable
1798 * Makefile.in (TARGET_SUBDIR): Move comment to previous line so we
1803 * configure.in (mips*-sgi-irix6*): Set noconfigdirs appropriately.
1807 * Makefile.in (taz): Handle case where tex3patch didn't even get
1808 checked out. Also, if it was found, put the symlink in a new util
1813 * config.guess (*:Linux:*:*): Add support for PowerPC Linux.
1817 * config.sub: Recognize -openvms.
1818 * configure.in (alpha*-*-*vms*): Set noconfigdirs.
1819 * make-all.com, setup.com: New files.
1823 * Makefile.in (taz): tex3patch moved to texinfo/util.
1827 start-sanitize-gdbtk
1828 * configure: enable_gdbtk=no for cygwin32-hosted toolchains
1830 * configure.in: remove make from disable-if-Can-Cross list
1831 enable gdb if ${host} and ${target} are cygwin32
1835 * config.guess (i?86-ncr-sysv*): Emit minor release numbers.
1836 Recognize the NCR 4850 machine and NCR Pentium-based platforms.
1840 * config.guess: Combine mips-mips-riscos cases, and use cpp to
1841 distinguish sysv/svr4/bsd variants.
1846 * configure.in: Added copyright notice.
1847 * move-if-change: Added copyright notice.
1851 * configure.in (powerpcle-*-solaris*): Until we get shared
1852 libraries working, don't build gdb, sim, make, tcl, tk, or
1857 * config.guess: Merge with FSF:
1860 * config.guess (*:Linux:*:*): Add guess for sparc-unknown-linux.
1863 * config.guess (AViiON:dgux:*:*): Fix typo in recognizing mc88110.
1866 * config.guess: Combine two OSF1 rules.
1868 * config.guess (dgux): Use /usr/bin/uname rather than uname,
1873 * Makefile.in (MAKEDIRS): Removed $(tooldir).
1877 * mpw-README: Document GCCIncludes.
1881 * configure.in (alpha-*-linux*): Set enable_shared to yes.
1885 * mpw-configure: Handle --enable-FOO and --disable-FOO.
1889 * configure.in (*-*-cygwin32): Configure make.
1893 * Makefile.in (inet-install): Quote value of INSTALL_MODULES.
1897 * Makefile.in (all-inet): Depend on all-perl.
1899 * Makefile.in (inet-install): New target.
1901 * Makefile.in (all-inet): Depend on all-tcl.
1902 (all-inet): Depend on all-send-pr.
1906 * configure.in (powerpcle-*-solaris*): Turn off tk and tcl
1911 * configure.in: Don't configure --with-gnu-ld on AIX.
1915 * configure.in (powerpcle-*-solaris*): Turn off gdb temporarily.
1919 * Makefile.in (ALL_MODULES): Added all-inet.
1920 (CROSS_CHECK_MODULES): Added check-inet.
1921 (INSTALL_MODULES): Added install-inet.
1922 (CLEAN_MODULES): Added clean-inet.
1923 (all-indent): New target.
1925 * configure.in (host_tools): Added inet.
1926 (native_only): Added inet.
1927 (noconfigdirs): Added inet.
1931 * configure.in: Don't configure libgloss if we are not configuring
1936 * configure.in: Don't configure libgloss for unsupported
1941 * Makefile.in (CLEAN_MODULES): Add clean-apache.
1945 * Makefile.in (ALL_MODULES): Include all-apache.
1946 (CROSS_CHECK_MODULES): Include check-apache.
1947 (INSTALL_MODULES): Include install-apache.
1948 (all-apache): New target.
1950 * configure.in: Added apache everywhere perl is seen.
1954 * Makefile.in: Add support for clean-{module} and
1955 clean-target-{module} rules.
1959 * configure.in (*-*-ose) do not build libgloss.
1963 * config.guess (prep*:SunOS:5.*:*): Turn into
1964 powerpele-unknown-solaris2.
1968 * configure.in: Permit --enable-shared to specify a list of
1973 * configure.in (host==solaris): Pass only the first word of $CC
1974 to /usr/bin/which when checking if we're using /usr/ccs/bin/cc.
1978 * Makefile.in (BASE_FLAGS_TO_PASS): pass down $(MAKE).
1982 * Makefile.in (ALL_MODULES): Include all-perl.
1983 (CROSS_CHECK_MODULES): Include check-perl.
1984 (INSTALL_MODULES): Include install-perl.
1985 (ALL_X11_MODULES): Include all-guile.
1986 (CHECK_X11_MODULES): Include check-guile.
1987 (INSTALL_X11_MODULES): Include install-guile.
1988 (all-perl): New target.
1989 (all-guile): New target.
1991 * configure.in (host_tools): Include perl and guile.
1992 (native_only): Include perl and guile.
1993 (noconfigdirs): Don't build guile and perl; no ports have been
1998 * configure (--enable-*): Handle quoted option lists such as
1999 --enable-sim-cflags='-g0 -O' better.
2003 * Makefile.in ({,inst}all-target): New rule so we can make and
2004 install all of the target directories easily.
2008 * configure.in: Add missing global flag in sed substitution when
2009 deleting `target-' from ${configdirs}.
2013 * Makefile.in (DO_X): Don't get confused if CC contains `=' in an
2016 * configure.in (mips*-nec-sysvr4*): Use a host_makefile_frag of
2019 * install.sh: Correct misspelling of transformbasename.
2021 * config.guess: Recognize mips-*-sysv*.
2025 * config.sub: Recognize mon960.
2029 * configure: Restore Canadian Cross handling of BISON and LEX,
2030 removed in Feb 20 change.
2035 Mention make install. Remove the old copyright date as well the
2036 clumsy and rather pointless copyright on the README file.
2040 * Makefile.in ($(CONFIGURE_TARGET_MODULES)): If there is a
2041 Makefile after running symlink-tree, then run `make distclean' to
2042 avoid clobbering any generated files in srcdir.
2046 * configure.in (m68k-*-netbsd*): Build everything now.
2050 * Makefile.in (taz): Fix quoting.
2054 * configure.in (sparclet-*-*): Build everything now.
2058 * configure.in (m68k-*-linux*): New host.
2062 * configure: Check for bison before byacc.
2066 * Makefile.in configure: Change the way LEX and BISON/YACC are
2067 set. configure now defines DEFAULT_LEX and DEFAULT_YACC by
2068 searching PATH. These are used as fallbacks by Makefile.in if
2069 flex/bison/byacc aren't in objdir.
2073 * Makefile.in: Make everything which depends upon all-bfd also
2074 depend upon all-opcodes, in case --with-commonbfdlib is used.
2078 * configure.in (host *-*-cygwin32): Don't build gdb if we are
2079 building NT native compilers on Unix.
2083 * configure.in: Don't get CC from the host Makefile fragment if we
2084 can find gcc in PATH, or if this is a Canadian Cross. Move the
2085 Solaris test for /usr/ucb/cc to the post target script, just after
2086 the compiler sanity test.
2090 * config.sub: Merge with FSF.
2094 * Makefile.in (RPATH_ENVVAR): New variable.
2095 (REALLY_SET_LIB_PATH): Use it.
2096 * configure.in: On HP/UX, set RPATH_ENVVAR to SHLIB_PATH.
2100 * config.sub, configure.in: Recognize sparclet cpu.
2104 * config.guess: Support m68k-cbm-sysv4.
2108 * config.guess (*:Linux:*:*): Guess m68k-unknown-linux and
2109 m68k-unknown-linuxaout from linker help string. Put quotes around
2114 * config.guess (powerpc-harris-powerunix): Add guess for port
2119 * config.guess (UNAME_VERSION): Recognize X4.x as an OSF version.
2123 * configure.in: If --enable-shared was used, set SET_LIB_PATH to
2124 $(REALLY_SET_LIB_PATH) in Makefile.
2125 * Makefile.in (SET_LIB_PATH): New variable.
2126 (REALLY_SET_LIB_PATH): New variable.
2127 ($(DO_X)): Use $(SET_LIB_PATH).
2128 (install.all, gcc-no-fixedincludes, $(ALL_MODULES)): Likewise.
2129 ($(NATIVE_CHECK_MODULES), $(CROSS_CHECK_MODULES)): Likewise.
2130 ($(INSTALL_MODULES), $(CONFIGURE_TARGET_MODULES)): Likewise.
2131 ($(ALL_TARGET_MODULES), $(CHECK_TARGET_MODULES)): Likewise.
2132 ($(INSTALL_TARGET_MODULES), $(ALL_X11_MODULES)): Likewise.
2133 ($(CHECK_X11_MODULES), $(INSTALL_X11_MODULES)): Likewise.
2134 (all-gcc, all-bootstrap, check-gcc, install-gcc): Likewise.
2135 (install-dosrel): Likewise.
2136 (all-opcodes): Depend upon all-libiberty.
2140 * config.guess (*:CYGWIN*): New
2144 * Makefile.in (all-target-winsup): All all-target-libiberty.
2148 * configure.in (noconfigdirs): Add missing # in front of comment.
2152 * configure.in: add second pass to things added to noconfigdirs
2153 so *-gm-magic can exclude libgloss properly.
2157 * mpw-configure (extralibs_name, rez_name): Set correctly
2158 for MWC68K compiler.
2160 * mpw-README: Add more info on the necessary build tools.
2164 * configure.in, config.sub: Recognize cygwin32.
2168 * config.guess, config.sub: Recognize A/UX.
2172 * config.sub: Merge with gcc/config.sub.
2176 * mpw-build.in (do-binutils): Add build of stamps.
2180 * config.sub: Add recognition for mips64vr4100*-* targets.
2184 * test-build.mk: Add checking of `hpux9' rather than just `hpux'.
2185 Add creation of gconfigargs with `--enable-shared' turned on.
2186 ($(host)-stamp-stage2-configured): Pass $(gconfigargs).
2187 ($(host)-stamp-stage3-configured): Likewise.
2188 (HOLES): Add chatr and ldd.
2189 (i386-ncr-sysv4.3*): Add use of /usr/ccs/bin in the PATH and HOLE_DIRS.
2193 * configure: Pass --nfp to recursive configures.
2197 * Makefile.in (DLLTOOL): New.
2198 (DLLTOOL_FOR_TARGET): New.
2199 (EXTRA_HOST_FLAGS): Pass down DLLTOOL.
2200 (EXTRA_TARGET_FLAGS): Ditto.
2201 (EXTRA_GCC_FLAGS): Ditto.
2202 (CONFIGURE_TARGET_MODULES): Ditto.
2204 * configure: Add DLLTOOL.
2209 * configure.in (i[345]86-*-sco3.2v5*): Use mh-sysv instead of
2210 mh-sco, since old workarounds no longer needed, and don't
2211 build ld, since libraries have weak symbols in COFF.
2215 * Makefile.in (CONFIGURE_TARGET_MODULES): Add missing ';'.
2219 * configure.in: Make sure that ${CC} can be used to compile an
2222 start-sanitize-gdbtk
2225 * Makefile.in (all-gdb): Depend on $(GDB_TK).
2226 * configure (GDB_TK): Set GDB_TK to either "all-tcl all-tk" or
2227 nothing depending on whether gdbtk is being built.
2232 * Makefile.in (newlib.tar.gz): Delete building of newlib's info files.
2236 * configure.in (noconfigdirs): Put ld or gas in this early, if the
2237 user specifically used --with-gnu-ld=no or --with-gnu-as=no.
2241 * config-ml.in: Add support for
2242 --disable-{softfloat,m68881,m68000,m68020} on m68*-*-*.
2243 Simplify setting of multidirs from --disable-foo.
2247 * Makefile.in (EXTRA_GCC_FLAGS): If any of the make variables
2248 LANGUAGES, BOOT_CFLAGS, STMP_FIXPROTO, LIMITS_H_TEST,
2249 LIBGCC1_TEST, LIBGCC2_CFLAGS, LIBGCC2_INCLUDES, and ENQUIRE are
2250 non-empty, pass them on to the GCC make.
2251 (all-bootstrap): New rule that is like all-gcc, except it executes
2252 the GCC bootstrap rule instead of the GCC all rule.
2256 * config-ml.in (ml_realsrcdir): New, to account for ${subdir}.
2260 * config.guess (AViiON:dgux:*:*): Update from FSF to add pentium
2265 * config.sub (i*86*) Change [345] to [3456]
2269 * configure.in (noconfigdirs): Add gas or ld if --with-gnu-as=no or
2274 * config-ml.in (rs6000*, powerpc*): Add switches to control which
2275 AIX multilibs get built.
2279 * configure.in (i386-win32): Don't build expect if we're not
2280 building the tcl subdir.
2284 * Makefile.in: (configure-target-examples, all-target-examples):
2285 New targets, configure and build example programs.
2289 * mpw-configure: If an mpw-config.in generated a file mk.sed,
2290 use it as input to sedit the generated MPW makefile.
2291 * mpw-README: Add a suggestion about Gestalt.h.
2295 * config.sub: Accept *-*-ieee*.
2299 * Makefile.in (local-distclean): Remove $(TARGET_SUBDIR). From
2304 * configure.in (host==powerpc-pe): Add many directories to noconfigdirs
2305 for powerpc-pe native.
2306 (target==i386-win32): add tcl, make to noconfigdirs if canadian cross.
2307 (target==powerpc-pe): duplicate i386-win32 entry.
2311 * configure.in (noconfigdirs): Exclude target-newlib for all versions
2312 of vxworks, not just vxworks5.1.
2316 * mpw-configure: Add support for exec-prefix.
2320 * config.guess: Recognize HP model 816 machines as having
2325 * configure: Ignore new autoconf configure options.
2329 * config/mt-v810 (CC_FOR_TARGET): Add -ansi flag. NEC compiler
2330 defaults to K&R mode, but doesn't have varargs.h, so we have to
2331 compile in ANSI mode.
2335 * config.guess: Recognize Pentium under SCO.
2340 * configure.in (noconfigdirs): Disable target-libio on v810-*-*.
2341 * config/mt-v810 (CC_FOR_TARGET, AS_FOR_TARGET, AR_FOR_TARGET,
2342 RANLIB_FOR_TARGET): Set as appropriate for NEC v810 toolchain.
2346 * configure.in: Don't configure gas for alpha-dec-osf*.
2350 * configure.in: Default to --with-stabs for some targets for which
2351 it makes sense: mips*-*-*, alpha*-*-osf*, i[345]86*-*-sysv4* and
2352 i[345]86*-*-unixware*.
2356 * config-ml.in: Get list of multidirs using gcc --print-multi-lib
2357 rather than basing it on the target. Simplify handling of options
2358 controlling which directories to configure. Remove extraneous
2359 slash in multi-clean target.
2363 * config-ml.in: Prefix more variables with ml_ so they don't collide
2368 * configure: Don't turn -v into --v.
2372 * configure.in (targargs): Fix typo.
2374 * Makefile.in (DEVO_SUPPORT): Add symlink-tree.
2378 * configure.in: Strip --host and --target options from
2379 CONFIG_ARGUMENTS, and always configure for --host only. Add
2380 --with-cross-host option when building with a cross-compiler.
2381 * configure: Canonicalize the arguments put into config.status by
2382 always using `=' for an option with an argument. Pass a presumed
2383 --host or --target explicitly.
2387 * config.sub: Merge -macos*, -magic*, -pe*, and -win32 cases
2388 into general OS recognition case.
2392 * configure.in (target_configdirs): add target-winsup only
2393 for win32 target systems.
2397 * Makefile.in (all-target-libgloss): Depend upon
2398 configure-target-newlib, since when libgloss is built it looks to
2399 see if the newlib directory exists.
2403 * Makefile.in (DEVO_SUPPORT): Use config-ml.in instead of
2408 * configure: Handle LD and LD_FOR_TARGET when configuring a
2413 * config/mh-i386win32: add LD_FOR_TARGET.
2417 * configure.in (target_libs): add target-winsup.
2418 (target==i386-win32): add patch diff flex make to $noconfigdirs.
2419 (target==ppcle-pe): remove ld from $noconfigdirs.
2423 * Makefile.in (CONFIGURE_TARGET_MODULES): Pass --with-target-subdir.
2424 Preserve relative path names in $srcdir. Build symlink tree if
2425 configuring cross target dir and srcdir=. (= no VPATH support).
2426 (configure-target-libg++): Depend on configure-target-librx.
2427 * cfg-ml-com.in, cfg-ml-pos.in: Deleted.
2428 * config-ml.in: New file.
2429 * symlink-tree: New file.
2430 * configure: Ensure srcdir="." if that's what it is.
2434 * mpw-README: Clarify some phrasing, add notes about CodeWarrior
2435 includes and FLEX_SKELETON setting.
2436 * mpw-configure (--with-gnu-ld): New option, controls whether
2437 to use PPCLink or ld with PowerMac GCC.
2438 * mpw-build.in (all-grez, do-grez, install-grez): New targets.
2439 * mpw-config.in: Configure grez if targeting Mac.
2441 * config.sub: Accept pmac and pmac-mpw as names for PowerMacs,
2442 accept mpw and mac-mpw as names for m68k Macs, change macos7 to
2444 * configure.in: Configure grez resource compiler if targeting Mac.
2445 * Makefile.in (all-grez, install-grez): New targets.
2449 * configure: CXX defaults to gcc, not g++. If we find
2450 gcc in the path, set CC to gcc -O2.
2454 * configure: Default ${build} correctly. Avoid picking up extra
2455 spaces when reading CC and CXX from Makefile. When doing a
2456 Canadian Cross, use plausible default values for numerous
2458 * configure.in: When doing a Canadian Cross, don't try to
2459 configure tools whose configure script can't handle it.
2463 * cfg-ml-com.in (sh-*-*): Add m2 and ml/m2 to multidirs.
2467 * configure: Remove dubious bug reporting address.
2471 * Makefile.in ($(CONFIGURE_TARGET_MODULES)): If subdir has
2472 configure script, run that instead of this directory's configure.
2473 In either case, print a message that we're configuring the sub-dir.
2477 * configure.in: Before checking for the existence of various files,
2478 use sed to filter out "target-".
2482 * Makefile.in (DO_X): Split rule to decrease command line length
2484 (Philippe De Muyter).
2488 * Makefile.in (all-patch): depend on all-libiberty.
2492 * configure.in: If the only directory in target_configdirs which
2493 actually exists is libiberty, then set target_configdirs to empty,
2494 to avoid trying to build a target libiberty in a gas or gdb
2499 * configure.in (host_makefile_frag): Use m68k-sun-sunos* instead
2500 of m68k-sun-* when selecting mh-sun3 to avoid matching NetBSD/sun3
2505 * configure.in (copy_dirs): Use sys-include instead of include
2506 for --with-headers option.
2510 * Makefile.in, configure.in: Make winsup builds work with
2515 * configure.in: Build the linker on AIX.
2519 * Makefile.in (CC_FOR_TARGET, CXX_FOR_TARGET): Add $(TARGET_SUBDIR)
2524 * Makefile.in (all-gcc): Fix typo.
2528 * Makefile.in ($(CHECK_TARGET_MODULES)): Fix typo.
2532 * configure.in: Rename libFOO to target-libFOO, and xiberty
2533 to target-xiberty, to provide more flexibility.
2534 (target_subdir): Define. Create if cross.
2535 Set TARGET_SUBDIR in Makefile to ${target_subdir}.
2536 * Makefile.in: Rename all-libFOO -> all-target-libFOO, all-xiberty
2537 -> all-target-libiberty, configure-libFOO -> configure-target-libFOO,
2538 check-libFOO -> check-target-libFOO, etc.
2539 ($(DO_X)): Iterate over TARGET_CONFIGDIRS after SUBDIRS.
2540 ($(CONFIGURE_TARGET_MODULES), $(CHECK_TARGET_MODULES),
2541 $(ALL_TARGET_MODULES), $(INSTALL_TARGET_MODULES)): Update accordingly.
2542 (configure-target-XXX): Depend on $(ALL_GCC), not all-gcc, to
2543 allow ALL_GCC="" to only configure.
2544 (DEVO_SUPPORT): Add cfg-ml-com.in and cfg-ml-pos.in.
2545 (ETC_SUPPORT, ETC_SUPPORT_PFX): Merge; update 'taz' accordingly.
2546 (LIBGXX_SUPPORT_DIRS): Remove xiberty.
2550 * Makefile.in (taz): Build "info" in etc explicitly.
2554 * configure.in: Make sure that CC is undefined (as opposed to
2555 null) if toplevel/config/mh-{host} doesn't define it. Fixes a
2556 problem with autoconf trying to configure on a host without GCC.
2560 * mpw-configure: Set host alias from choice of host compiler,
2561 only use generic MPW Makefile sed if present, edit a file
2562 named "hacked_Makefile.in" instead of "Makefile.in" if present.
2563 * mpw-README: Add problem notes about CW6 and CW7.
2567 * Makefile.in (taz): Use ";" instead of ";;".
2571 * Makefile.in (taz): Grep for '^diststuff:' or '^info:' in
2572 sub-directory Makefiles, instead of using DISTSTUFFDIRS and
2574 (DISTSTUFFDIRS, DISTDOCDIRS): Removed - no longer used.
2575 (newlib.tar.gz): Don't pass DISTDOCDIRS to recursive make.
2579 * Makefile.in (DISTDOCDIRS): Remove ld gprof bnutils gas libg++ gdb
2580 and gnats, because they are now subsumed by DISTSTUFFDIRS.
2581 Move bfd to DISTSTUFFDIRS.
2585 * Makefile.in (X11_LIB): Removed.
2586 (X11_FLAGS_TO_PASS): pass only X11_EXTRA_CFLAGS and X11_EXTRA_LIBS.
2588 * configure.in (host_makefile_frag): mh-aix & mh-sun removed.
2592 * cfg-ml-com.in (powerpc*): Shorten some of the multilib directory
2597 * cfg-ml-com.in (powerpc*-eabi*): Add mcall-aixdesc varients.
2601 * configure.in (i[345]86-*-win32): Always build newlib.
2602 Don't configure cvs, autoconf or texinfo.
2603 * Makefile.in (LD_FOR_TARGET): New.
2604 (BASE_FLAGS_TO_PASS, EXTRA_TARGET_FLAGS, CONFIGURE_TARGET_MODULES):
2605 Pass down LD_FOR_TARGET.
2609 * winsup: New directory.
2610 * Makefile.in: Build winsup.
2611 * configure.in: Winsup is configured when target is win32.
2612 Can only build win32 target GDB when native.
2616 * config.guess: Recognize HP model 819 machines as having
2621 * configure: Fix sed loop which substitutes for CC and CXX to
2622 avoid bug found in various sed implementations.
2626 * cfg-ml-com.in (powerpc-*-eabisim): Delete separate rule for
2627 simulator. Use standard powerpc-*-eabi*.
2631 * configure.in: Stop putting gas and binutils in noconfigdirs for
2632 powerpc-*-aix* and rs6000-*-*.
2636 * cfg-ml-com.in (powerpc*-*-eabisim*): Add support for building
2637 -mcall-aixdesc libraries.
2643 * config.sub (arm | armel | armeb): Fix shell syntax.
2647 * cfg-ml-com.in ({powerpc,rs6000}-ibm-aix*): Add multilibs for
2648 -msoft-float and -mcpu=common support.
2649 (powerpc*-*-eabisim*): Add support for building -mcall-aix
2654 * configure.in: Allow configuration and build of emacs19 for the alpha.
2658 * configure.in (CC): Get ^CC, not just any old CC, from
2659 ${host_makefile_frag}.
2663 * configure.in (CC): Try to get CC from
2664 ${srcdir}/${host_makefile_frag}, not ${host_makefile_frag}.
2668 * Makefile.in (TARGET_CONFIGDIRS): configure targetdirs
2669 only if it exists in $(srcdir).
2673 * configure: If CC and CXX are not set in the environment, set
2674 them, based on either an existing Makefile or on searching for gcc
2675 in PATH. Substitute for CC and CXX in Makefile.
2676 * configure.in: Remove libm from target_libs. Separate
2677 target_configdirs from configdirs. If CC is not set in
2678 environment, try to get it from a host Makefile fragment. Rewrite
2679 changes of configdirs to use skipdirs instead. A few minor
2680 tweaks. Take directories out of target_configdirs as they are
2681 taken out of configdirs. Remove existing Makefile files from
2682 subdirectories. Substitute for TARGET_CONFIGDIRS and
2683 CONFIG_ARGUMENTS in Makefile.
2684 * Makefile.in (TARGET_CONFIGDIRS): New variable, automatically set
2686 (CONFIG_ARGUMENTS): Likewise.
2687 (CONFIGURE_TARGET_MODULES): New variable.
2688 ($(DO_X)): Loop over TARGET_CONFIGDIRS as well as SUBDIRS.
2689 ($(CONFIGURE_TARGET_MODULES)): New target.
2690 (configure-libg++, configure-libio): New targets.
2691 (all-libg++): Depend upon configure-libg++.
2692 (all-libio): Depend upon configure-libio.
2693 (configure-libgloss, all-libgloss): New targets.
2694 (configure-libstdc++): New target.
2695 (all-libstdc++): Depend upon configure-libstdc++.
2696 (configure-librx, all-librx): New targets.
2697 (configure-newlib): New target.
2698 (all-newlib): Depend upon configure-newlib
2699 (configure-xiberty): New target.
2700 (all-xiberty): Depend upon configure-xiberty.
2704 * configure.in (host i[345]86-*-win32): Expand the
2709 * mpw-configure: Fix sed command file name.
2713 * configure.in (host i[345]86-*-win32): Reduce the
2718 * configure.in: Don't configure ld and gdb for powerpc*-*-winnt*
2719 or powerpc*-*-pe*, since they are not yet supported.
2723 Add PowerMac support and many other enhancements.
2724 * mpw-configure: New option --cc to select compiler to use,
2725 paste options set according to --cc into the generated
2726 Makefile, generate the Makefile by sed'ing the Unix Makefile.in
2727 if mpw-make.sed is present.
2728 * mpw-config.in: Don't test for gC1, test for mpw-touch,
2729 add forward includes for PowerPC include files.
2730 * mpw-build.in: Build using Makefile.PPC if present.
2731 (do-byacc, etc): Remove separate version resource builds.
2732 (do-gas): Build "stamps" before "all".
2733 (do-gcc): Build "stamps-h" and "stamps-c" before "all".
2734 * mpw-README: Update to reflect --cc option, PowerMac support,
2735 and recently-reported compatibility problems.
2739 * cfg-ml-com.in (m68*-*-*): Only build multilibs for
2740 embedded m68k systems (-aout, -coff, -elf, -vxworks).
2741 (--with-multilib-top): Pass to recursive invocations.
2745 * configure.in (noconfigdirs): Disable libg++ and libstdc++ on
2750 * configure.in (noconfigdirs): Disable bfd, binutils, gas, gcc,
2751 gdb, ld and opcodes on v810-*-*.
2755 * config/mh-ncrsvr43: Removed AR_FLAGS
2759 * Makefile.in (DO_X): Change do-realclean to do-maintainer-clean.
2760 (local-maintainer-clean): New target.
2761 (maintainer-clean): New target.
2762 (realclean): Just depend upon maintainer-clean.
2766 * configure.in (noconfigdirs): Disable gdb on m68k-*-netbsd*.
2770 * configure.in: Build ld in mips*-*-bsd* case.
2774 * config.sub: Accept -lites* OS. From Ian Dall.
2778 * config.sub: recognise mips64vr4300 and mips64vr4300el as valid
2783 * configure.in: treat i386-win32 canadian cross the same as
2784 i386-go32 canadian cross.
2788 * cfg-ml-com.in (powerpc*-*-eabisim): Add support for PowerPC
2789 running under the simulator to build a reduced set of libraries.
2790 (powerpc-*-eabiaix): Add fine grained multilib support added to
2791 other powerpc targets yesterday.
2795 * cfg-ml-com.in (powerpc*): Add support for -disable-biendian,
2796 -disable-softfloat, -disable-relocatable, -disable-aix, and
2797 -disable-sysv to control which multilib libraries get built.
2801 * configure: Add Makefile.tem to list of files to remove in trap
2806 * config.guess (*Linux*): Add missing "exit"s.
2807 Also, need specific check for alpha-unknown-linux (uses COFF).
2811 * config.guess: Merge with FSF:
2814 * config.guess (AIX4): More robust release numbering discovery.
2817 * config.guess (i386-sequent-ptx): Properly get version number.
2820 * config.guess (mips:*:4*:UMIPS): New case.
2824 * configure.in (i386-go32 host): Fix typo (deja-gnu -> dejagnu).
2825 (i386-win32 host): Likewise. Don't build readline.
2827 start-sanitize-gdbtk
2830 * Makefile.in (GDBTK_SUPPORT_DIRS): Define and pass as part of
2831 SUPPORT_FILES to submakes.
2836 * Makefile.in (GDB_SUPPORT_DIRS): Add utils.
2837 (DEVO_SUPPORT): Add mpw-README, mpw-build.in, mpw-config.h and
2842 * configure.in (appdirs): Use =, not ==, in test expression when
2843 trying to build the text to print in the warning message for
2848 * cfg-ml-com.in (z8k-*-coff): Add 'std' multilib build.
2852 * config.guess: Recognize lynx-2.3.
2856 * config.sub (z8ksim): Deleted
2857 (z8k-*-coff): New, this is the one true name of the target.
2861 * cfg-ml-pos.in (dotdot): Work around SunOS sed bug.
2865 * config.guess (*:Linux:*:*): First try asking the linker what the
2866 default object file format is (elf, aout, or coff). Then if this
2867 fails, try previous methods.
2871 * configure.in: Don't build newlib for *-*-vxworks5.1.
2875 * configure.in: Don't build newlib for a29k-*-vxworks5.1.
2876 * test-build.mk: Add setting of --with-headers for a29k-vxworks5.1.
2880 * cfg-ml-pos.in (MULTITOP): Trim excess trailing "/.".
2884 * cfg-ml-com.in: New file.
2885 * cfg-ml-pos.in: New file.
2889 * COPYING.NEWLIB: Add HP free copyright to list.
2893 * config.sub: Recognize -eabi* for the system, not just -eabi.
2897 * Makfile.in (DLLTOOL_FOR_TARGET): New name, pass it down.
2898 * config.sub, configure.in (win32): New target and host.
2902 * configure.in: Add i386-pe configuration.
2906 * mpw-build.in (install): Install GDB after LD.
2910 * mpw-config.in (elf/mips.h): Always forward-include, needed
2915 * testsuite: New directory for customer acceptance and whole tool
2920 * configure: If per-host line isn't found, but AC_OUTPUT is found
2921 and a configure script exists, run it instead.
2925 * config.guess: Update from FSF, for alpha-dec-winnt3.5 and Crays.
2929 * configure: Set build_{cpu,vendor,os,alias} to host values when
2930 --build isn't specified.
2934 * Makefile.in (PICFLAG, PICFLAG_FOR_TARGET): New macros.
2935 (FLAGS_TO_PASS): Pass them.
2936 (EXTRA_TARGET_FLAGS): Ditto.
2938 * config/m?-*pic: Define PICFLAG* instead of LIB*FLAGS*.
2942 * Makefile.in (all-libg++): Depend on all-libstdc++.
2946 * configure.in (noconfigdirs): Enable all packages for
2947 i386-unknown-netbsd.
2951 * configure.in (noconfigdirs): Don't configure tk for i386-go32
2952 hosted builds (DOS builds)
2956 Changes for ARM based on patches from Richard Earnshaw:
2957 * config.sub: Handle armeb and armel.
2958 * configure.in: Omit arm linker only for riscix.
2962 * config.guess: Update from FSF.
2966 * config.sub: Recognize powerpcle as the little endian varient of
2967 the PowerPC. Recgonize ppc as a PowerPC variant, and ppcle as a
2968 powerpcle variant. Convert pentium into i586, not i486. Add p5
2969 alias for i586. Map new x86 variants p6, k5, nexgen into i586
2974 * configure.in (hppa*-*-lites*): Treat like hppa*-*-*elf*.
2978 * config.sub: Accept -lites* as a basic system type.
2982 * config.guess (*:Linux:*:*): Check for whether the pre-BFD linker is
2983 installed, and if so return linuxoldld as the system name.
2987 * config.guess: Add hppa1.1-hp-lites support.
2991 * configure.in: Don't build newlib for m68k-vxworks5.1.
2995 * configure.in (mips-sgi-irix6): Use mh-irix5.
2999 * Makefile.in (all-gcc): Depend on all-ld (for libgcc1-test).
3003 * test-build.mk: Enable building of shared libraries on IRIX 5 and
3004 OSF/1. Fix compiler flags.
3005 * build-all.mk: Support Linux and OSF/1 3.0. Fix compiler flags.
3009 * configure.in: Recognize --with-newlib.
3010 (sparc-*-sunos4*): Build sim, dejagnu, expect, tcl if cross target.
3012 start-sanitize-gdbtk
3015 * Makefile.in: move {all,check,install}-gdb from *_MODULES
3016 to *_X11_MODULES due to gdbtk needing X include files et al.
3021 Merge in support for Mac MPW as a host.
3022 (Old change descriptions retained for informational value.)
3024 * mpw-config.in: Add generic include forwards for cpu-specific
3025 include files in aout and elf directories.
3027 * mpw-configure: Added copyright.
3028 * mpw-config.in: Check for presence of required build tools.
3029 (target_libs): Add newlib.
3030 (target_tools): Add examples.
3031 (Read Me): Generate as "Read Me for MPW" instead.
3032 * mpw-build.in: Base sub-builds on all-foo instead of do-foo.
3033 (all-byacc, do-byacc, all-flex, do-flex, do-newlib): New actions.
3034 (do-gas, do-gcc, do-gdb, do-ld): Build Version.r first.
3036 * mpw-configure: Remove subdir-specific makefile hackery,
3037 delete mk.tmp after using it.
3039 * mpw-build.in (all): Display start and end times.
3041 * mpw-configure (host_canonical): Set.
3042 (target_cpu): Always add to makefiles.
3043 (ARCHDEFS, EMUL): Add to makefile only if nonempty.
3044 (TM_FILE, XM_FILE, NM_FILE): No longer add to makefile.
3045 (mpw-mh-mpw): Look for in srcdir and srcroot.
3046 Use sed instead of mpw-edit-prefix to edit prefix definitions.
3048 * mpw-build.in: (install-only): New target.
3050 * mpw-configure (host_alias, target_alias): Rename from hostalias
3051 and targetalias, add into generated Makefile.
3052 (mk.tmp): If present, add into generated Makefile.
3053 * mpw-build.in (all-gas): Build config.h first before gas proper.
3055 * mpw-configure (config.status): Write only if changed.
3056 * mpw-config.in (readline): Configure it (not built, just used for
3059 * mpw-config.in (elf/mips.h): Add a forward include.
3061 * mpw-config.in: Forward-include most .h files in include into
3063 (readline): Don't build.
3064 mpw-build.in (install): Install GDB.
3066 * mpw-configure (prefix, mpw_prefix): Handle it.
3067 * mpw-config.in (mmalloc, readline): Don't configure.
3068 * mpw-build.in (thisscript): Rename to ThisScript.
3069 Use mpw-build instead of BuildProgram everywhere.
3070 (mmalloc, readline): Don't build.
3071 * mpw-README: New file, basic documentation about the MPW port.
3073 * mpw-config.in: Use forward-include to create include files.
3075 * mpw-configure: Add more things to the top of each configured
3076 Makefile, including contents of config/mpw-mh-mpw.
3077 * mpw-config.in (extra-include): Create this directory and fill it
3078 with Posix-like include files when configuring.
3080 * config.sub (apple, mac, mpw): Add various aliases.
3082 * mpw-build.in: New file, top-level build script fragment for MPW.
3083 * mpw-configure: New file, configure script for MPW.
3084 * mpw-config.in: New file, config fragment for MPW.
3088 * configure.in (host_libs): Remove glob, since it is gone from the
3093 * Makefile.in: define empty GDB_NLM_DEPS var.
3095 * configure.in(target_makefile_frag): use config/mt-netware
3096 for netware targets.
3100 * config.sub: Merge in recent FSF changes. Remove linux special
3105 build-all.mk,config/mh-solaris: revert these two changes:
3109 * build-all.mk: Use CC=cc -Xs on Solaris.
3111 Mon Mar 29 19:59:26 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3113 * config/mh-solaris: SunPRO C needs -Xs to be able to get a
3114 working xmakefile for Emacs.
3118 * glob/*: Removed. Schauer's 24 Feb 1994 readline change made us
3120 * Makefile.in: Nuke all references to glob subdirectory.
3124 * configure.in: Fix --enable-shared logic in per-host.
3128 * configure.in (*-hp-hpux[78]*): Use mh-hpux8.
3132 * configure.in (noconfigdirs): Don't build gas on AIX, for
3133 powerpc*-*-aix* as well as for rs6000*-*-aix*.
3137 * configure: Fix --cache-file to work if the file argument is a
3142 * configure: If the --cache-file is used, pass it down to
3143 configure in subdirectories.
3147 * config.sub: add vxworks29k configuration.
3151 * Makefile.in (taz): Do "diststuff" part quietly.
3155 * config.sub: Mini-merge with gcc/config.sub.
3159 * config.guess (IRIX): Sed - to _.
3163 * Makefile.in (source-vault, binary-vault): New targets.
3167 * config.sub: Recognize -eabi as a basic system type.
3171 * configure.in (enable_shared stuff): Fix typo.
3175 * Makefile.in (BASE_FLAGS_TO_PASS): Fix typo in passing LIBCXXFLAGS*.
3179 * Makefile.in (LIBCXXFLAGS_FOR_TARGET): Add -fno-implicit-templates.
3183 * configure.in (rs6000-*-*): Don't build gas.
3187 * Makefile.in: Use /x/x/ instead of /brokensed/brokensed/, to
3188 reduce command line length.
3189 (AS_FOR_TARGET): Check for as.new, not Makefile.
3190 (NM_FOR_TARGET): Check for nm.new, not Makefile.
3194 * config.guess: Merge from FSF.
3198 * configure: Don't use $ when handling program_suffix.
3202 * configure.in: Configure tk for hppa/hpux.
3206 * Makefile.in (LIBGXX_SUPPORT_DIRS): Add libstdc++.
3210 * Makefile.in: Move -fno-implicit-template from CXXFLAGS
3211 to LIBCXXFLAGS. Tests are better run without it.
3215 * Makefile.in (all-ispell): Depend on all-emacs19 instead of all-emacs.
3219 * configure.in (*-*-netware*): Don't configure xiberty.
3223 * configure.in: Remove tk from native_only list.
3227 * build-all.mk: Add mips-ncd-elf target to sun4 targets
3228 for special NCD build.
3232 * Makefile.in (DEVO_SUPPORT): Remove configure.bat and
3233 makeall.bat, they're only useful for binutils snapshots.
3234 (binutils.tar.gz, gas+binutils.tar.gz): Add configure.bat and
3235 makeall.bat to specified SUPPORT_FILES.
3239 * build-all.mk: Add Ericsson targets to sun4 and solaris
3240 hosts. Add BNR's sun4 target to solaris host, so their
3241 build-from-source will be tested in-house first.
3245 * Makefile.in (LIBCFLAGS): New variable.
3246 (CFLAGS_FOR_TARGET): Ditto.
3247 (LIBCFLAGS_FOR_TARGET): Ditto.
3248 (LIBCXXFLAGS): Ditto.
3249 (CXXFLAGS_FOR_TARGET): Ditto.
3250 (LIBCXXFLAGS_FOR_TARGET): Ditto.
3251 (BASE_FLAGS_TO_PASS): Pass them.
3252 (EXTRA_TARGET_FLAGS): Ditto.
3254 * configure.in, config/m[th]-*pic: Support --enable-shared.
3258 * configure.in (target_libs): Include libstdc++ again.
3259 * config.guess: Update from FSF (for FreeBSD).
3263 * Makefile.in (DEVO_SUPPORT): Include configure.bat and
3265 (DISTDOCDIRS): Add `etc'.
3266 (ETC_SUPPORT_PFX): New variable.
3267 (taz): Include anything from etc starting with a word in
3272 * config.sub: Update for recent FSF changes. Remove obsolete
3273 h8300hds entry. Add -windows* and -osx as basic os. Minor
3278 * configure.in (target_libs): Remove libstdc++ for libg++-2.6.1.
3280 * config.guess: Merge with FSF.
3281 * configure.in: Match on i?86-ncr-sysv4.3, not i?86-ncr-sysv43.
3285 * configure: Since the "trap 0" handler will override the exit
3286 status on many systems, only use it for "exit 1", and make it set
3287 a non-zero exit status; reset it before "exit 0". Also, check
3288 exit status of config.sub, and error out if it failed.
3292 * Makefile.in: (ALL_TARGET_MODULES,INSTALL_TARGET_MODULES) Build
3293 and install libgloss.
3297 * Makefile.in (all-binutils): Depend upon all-byacc.
3299 * configure.in: Don't build emacs on Irix 5.
3303 * configure.in (*-*-netware*): Add libio.
3307 * Makefile.in (ALL_TARGET_MODULES): Add libstdc++.
3308 (CHECK_TARGET_MODULES): Ditto.
3309 (INSTALL_TARGET_MODULES): Ditto.
3310 (TARGET_LIBS): Ditto.
3311 (all-libstdc++): Note dependencies.
3315 * Makefile.in (BINUTILS_SUPPORT_DIRS): Add gas.
3319 * Makefile.in (CXXFLAGS): Use -fno-implicit-templates instead of
3320 -fexternal-templates.
3322 * configure.in (target_libs): Add libstdc++.
3323 (noconfigdirs): Add libstdc++ as appropriate.
3327 * config.guess: Update from FSF.
3331 * configure: Use ${config_shell} when running ${configsub}.
3335 * config.sub: No longer recognize h8300h.
3339 * config.sub: Remove extraneous differences between config.sub and
3344 * Makefile.in (DISTSTUFFDIRS): Add gas.
3348 * COPYING.NEWLIB: New file.
3352 * config.guess (HP-UX): Patch from Harlan Stenn
3357 * config.guess (sun4*:SunOS:*:*): Change '-JL' to '_JL'.
3361 * config.sub: Merge nextstep cleanup from FSF.
3365 * configure.in (arm-*-*): Don't configure ld for this target.
3369 * configure.in (*-*-netware): don't configure libg++, libio,
3374 * configure.in (alpha-dec-osf*): Use osf*, not osf1*. Don't
3375 configure ld--it works, but it doesn't support shared libraries.
3379 * config.guess (*-unknown-freebsd*): Get rid of possible
3380 trailing "(Release)" in version string.
3385 * config.guess: Fix i486-ncr-sysv43 -> i486-ncr-sysv4.3.
3386 Fix type: *-next-neststep -> *-next-nextstep.
3388 * config.guess: Merge from FSF:
3392 * config.guess: Recognize powerpc-ibm-aix3.2.5.
3396 * config.guess: Recognize UnixWare 1.1 (UNAME_SYSTEM is SYSTEM_V
3397 instead of UNIX_SV for UnixWare 1.0).
3401 * Makefile.in (all-gdb): Add dependencies on all-gcc and all-ld
3402 to make gdb/nlm/* build after the compiler and linker.
3406 * config.guess (netbsd, freebsd, linux): Accept any machine,
3408 (m68k-atari-sysv4): Relocate to match FSF version.
3410 * config.guess: More merges from the FSF:
3412 Add a space before function call or macro invocation.
3416 * config.guess: Add trap cmd to remove dummy.c and dummy when
3421 * config.guess (dummy.c): Redirect stderr for `hostinfo' command.
3422 (dummy): Redirect stderr from compilation of dummy.c.
3426 * config.guess: Distinguish between NeXTStep 2.1 and 3.x.
3430 * configure: Accept and ignore --cache*, for compatibility with
3435 * config.guess: Merge from FSF:
3439 * config.guess (Pyramid*:OSx*:*:*): New case.
3440 (PATH): Add /.attbin at end for finding uname.
3441 (dummy.c): Handle i860-alliant-bsd. Follow whitespace conventions.
3445 * config.guess (M88*:DolphinOS:*:*): New case.
3449 * config.guess (AViiON:dgux:*:*): Use TARGET_BINARY_INTERFACE
3450 to select whether to use ELF or COFF.
3454 * config.guess: Recognize i860-stardent-sysv and i860-unknown-sysv.
3458 * config.guess: Guess the OS version for HPUX.
3462 * config.guess (UNAME_VERSION): Recognize aix3.2.4 and aix3.2.5.
3466 * configure.in: Recognize --with-headers, --with-libs, and
3468 * Makefile.in (all-xiberty): Depend upon all-ld.
3472 * configure.in: Change i[34]86 to i[345]86.
3476 * configure (version): A few more tweaks to help message.
3480 * Makefile.in: Remove (for now) librx as a host library,
3481 now that we're building it for target.
3490 * configure.in: Also configure librx.
3494 * Makefile.in: Update various rules to reflect that librx
3495 is now needed for libg++.
3499 * config.sub: Accept mips64orion and mips64orionel as a CPU name.
3503 * configure.in: Configure the examples directory.
3507 * configure: Simplify Jun 2 1994 change.
3511 * change CC to /usr/latest/bin/gcc for lynx host builds, since
3512 /bin/gcc isn't good enough to build gcc.
3516 * Makefile.in (GDB_SUPPORT_FILES): Remove
3517 (setup-dirs-gdb, gdb.tar.gz, make-gdb.tar.gz): Remove old rules.
3518 (gdb.tar.gz): Add new rule to use standard distribution building
3523 * configure.in: Warn about use of /usr/ucb/cc on Solaris. From
3532 * configure: Search current dir first in .gdbinit.
3536 * config.sub: Recognize freebsd (merged from gcc config.sub).
3540 * config.sub: Refer to NeXT's operating system as nextstep.
3542 * config.sub (case $basic_machine): Re-order the cases, to match
3543 the order in the FSF version (which is mostly alphabethical).
3544 Merge in some additions and changes from the FSF.
3548 * config.guess: Recognize m68k-atari-sysv4 and m88k-harris-csux7.
3549 * config.sub: Recognize cxux7.
3550 * configure.in: Use mh-cxux for m88k-harris-cxux*.
3554 * config.sub: Fix typo powerpc -> powerpc-*.
3558 * Makefile.in: `all-emacs19' depends on `all-byacc'.
3560 * Makefile.in: Add all-emacs19 and install-emacs19 rules (in
3561 parallel with all-emacs and install-emacs). Top-level command
3562 `make all-emacs19 CC=gcc' now behaves as `make all-emacs CC=gcc'.
3566 * test-build.mk ($(host)-stamp-stage2-installed): Remove
3567 $(relbindir)/make before doing ``make install'', and use
3568 $(GNU_MAKE) while doing it. Avoids problem on SunOS with
3569 installing over running make binary.
3570 ($(host)-stamp-stage3-installed): Likewise.
3574 * config.guess: Recognize Mach.
3578 * configure: Check ${exec_prefixoption}, not ${exec_prefix}, to
3579 see whether --exec-prefix was used.
3583 * README: Explicitly mention libg++/README. (Zoo's idea.)
3587 * Makefile.in: Add all-librx target similar to all-libproc.
3591 * config.guess: Rearrange tests for Alpha-OSF1 to properly deal
3592 with post 1.2 uname bogosity.
3596 * configure: Remove temporary files on receipt of a signal.
3600 * configure: If there is a package_makefile_frag, remove
3601 ${subdir}/Makefile.tem after copying it in.
3605 * build_all.mk: support rs6000 lynx identifies itself as
3606 rs6000-lynx-lynxos2.2.2. Also, use /usr/cygnus/progressive/bin/gcc
3607 since /bin/gcc is too feeble to compile a modern gcc.
3611 * brought devo/test-build.mk update-to-date with progressive/
3612 test-build.mk. Add lynx targets and hppa flag info.
3616 * configure.in: Use mh-ncrsvr43. Patch from
3621 * config.guess (i386-unknown-bsdi): No longer need to
3622 check #if defined(__bsdi__) && defined(__i386__).
3626 * configure: Set program_transform_nameoption correctly.
3630 * brought build-all.mk update-to-date with progressive build-all.mk,
3631 added new targets and hppa info.
3635 * configure: If config.guess result is a prefix of the user
3636 specified target, assume a native build and use the user specified
3637 target as the host alias. Remove SunOS patch suffix removal hack.
3638 * configure.in: Remove SunOS patch suffix removal hack.
3640 * Makefile.in (CROSS_CHECK_MODULES): Remove check-flex, since it's
3641 in NATIVE_CHECK_MODULES.
3645 * Makefile.in: Rename HOST_ONLY to NATIVE.
3646 * configure: Delete SunOs patch suffix from host_canonical
3647 and build_canonical variables that are prepended to Makefiles.
3648 * configure.in: Add comments for easier maintenance.
3652 * Makefile.in: Add all-libproc target similar to all-gui.
3656 * Makefile.in (CHECK_MODULES): split into
3657 HOST_ONLY_CHECK_MODULES and CROSS_CHECK_MODULES.
3661 * config.guess (i386-unknown-bsdi): New system to guess.
3665 * Makefile.in: Add all-gui target (but not yet build by "all").
3669 * config.sub: Move deletion of patch suffix from here...
3670 * configure.in: To here, at Ian's suggestion. The top-
3671 level scripts might need to know of a patch level.
3675 * config.sub: Strip off patch suffix so rtl is recognized
3676 as a sunos4.1.3 machine, even though it's been patched.
3680 * Makefile.in (INSTALL_LAST): Delete.
3681 (INSTALL_DOSREL): New.
3685 * configure.in: Use ld for i[34]86-*-sysv4* and sparc-*-solaris2*.
3686 Don't set use_gnu_ld to no for *-*-sysv4; that only controls
3687 whether we pass down --with-gnu-ld anyhow.
3691 * Makefile.in (INSTALL_LAST): Change operation so it works
3692 on more flavors of make.
3693 * configure.in (go32): Don't build libg++ or libio.
3697 * Makefile.in (Move HOST_PREFIX_1 and friends up so
3698 they can be overriden by templates.
3702 * configure.in (target==go32): Don't build gdb.
3703 * dosrel: New directory.
3707 * configure.in (host==go32): Configure dosrel too.
3708 * Makefile.in (INTALL_TARGET): Call INSTALL_LAST last.
3709 (HOST_CC, HOST_PREFIX, HOST_PREFIX_1): Undefine, they should
3710 be set by incoming names or templates.
3711 (INSTALL_LAST): New rule.
3712 * config/mh-go32: New fragment.
3716 * config.sub (sparclitefrw, sparclitefrwcompat): Don't set the os.
3720 * config/mh-lynxrs6k: Renamed from mh-lynxosrs6k, to make it
3721 unique in 8.3 naming schemes.
3722 * configure.in (appdirs): New variable. Currently empty, but will
3723 be used in gas distribution. If nonempty, lists a set of
3724 directories at least one of which must get configured, or top
3725 level configuration is considered to have failed.
3726 (rs6000-*-lynxos*): Use new file name.
3730 Eliminate XTRAFLAGS.
3731 * Makefile.in (CC_FOR_TARGET): If newlib exists, refer to the
3732 newlib include files using -idirafter, and also use -nostdinc.
3733 (CXX_FOR_TARGET): Likewise.
3734 (XTRAFLAGS): Removed.
3735 (BASE_FLAGS_TO_PASS): Remove XTRAFLAGS_FOR_TARGET.
3736 (EXTRA_HOST_FLAGS): Remove XTRAFLAGS.
3737 (EXTRA_TARGET_FLAGS, EXTRA_GCC_FLAGS): Likewise.
3738 ($(DO_X)): Don't pass down XTRAFLAGS.
3742 * configure.in (mips*-dec-bsd*): New target; do build linker.
3743 (mips*-*-bsd*): New target; don't build linker.
3747 * configure.in: support rs6000-*-lynxos* configuration.
3748 support sunos4 as a cross target.
3750 * config.sub: look for lynx*, not lynx since the OS version may
3751 legitimately be part of the name.
3755 * configure.in (i[34]86-*-sco*): Move to be with other i386
3757 (romp-*-*): New target. Skip various binary utilities.
3758 (vax-*-*): New target. Don't build newlib.
3759 (vax-*-vms): Renamed from *-*-vms. Don't build opcodes or newlib.
3763 * configure.in: Only set host_makefile_frag if config
3768 * install.sh: If $dstdir exists, don't check whether each
3773 * test-build.mk (HOLES): Add sleep; used by rcs/src/conf.sh.
3777 * configure.in (*-*-lynxos*): Don't configure newlib for either
3778 native or cross Lynx.
3782 * config.sub (sparc64-elf): Fix os.
3783 (z8k): Remove duplicate.
3787 * Makefile.in (gcc-no-fixedincludes): Touch gcc/include/fixed, not
3788 gcc/stmp-fixproto, to try to prevent fixproto from being run.
3792 * configure: Make file links cleanly even if Lynx fails on
3793 an NFS symlink (at least fail cleanly).
3797 * test-build.mk (CC): For mips-sgi-irix4, change -XNh1500 to
3802 * configure: Unknown options are fatal again.
3806 * configure: Ignore --x-includes and --x-libraries, for Autoconf
3811 * build-all.mk: Add `clean' target.
3815 * config.guess: Add SINIX support.
3816 * configure.in: Add mips-*-sysv4* support.
3820 * build-all.mk: Document all useful targets.
3821 If canonhost is sparc-sun-solaris2.3, change it to sparc-sun-solaris2.
3822 If canonhost is mips-sgi-irix4.0.5H, change it to mips-sgi-irix4.
3826 * configure: Support --silent, --quiet.
3830 * configure: Support --disable-FEATURE.
3834 * config.guess: Recognize NCR running SVR4.3.
3838 * config.guess: Make BSDI generate i386-unknown-bsd386.
3843 * configure.in (powerpc-*-aix*): Treat like rs6000-*-*.
3847 * configure: Make unrecognized options give nonfatal warnings
3848 instead of fatal errors, and pass them to any subdirectory
3849 configures in case they recognize them.
3850 Make --x equivalent to --with-x.
3854 * configure: Add --enable-* options. Clean up usage message and
3859 * Makefile.in (NM_FOR_TARGET): Build tree version is now nm.new.
3863 * configure.in (hppa*-*-*): Enable binutils.
3867 * config.sub: Recognize cisco.
3871 * Makefile.in (CXXFLAGS): Add -fexternal-templates.
3875 * config.guess: about target *-hitachi-hiuxwe2, don't print more
3876 than one configuration name. Add comment.
3880 * config.guess: about target *-hitachi-hiuxwe2, fixed
3881 machine guessing order. [Hitachi's CPU_IS_HP_MC68K
3882 macro is incorrect.]
3886 * Makefile.in (TAGS): Just build TAGS in each subdirectory, rather
3887 than the "make ls" stuff which used to be here.
3891 * config.guess: Recognize i[34]86-unknown-freebsd.
3896 * configure.in (noconfigdirs for alpha): Remove libg++ and libio.
3900 * config.guess: Check for ptx.
3904 * config.sub: Add os9k checking.
3908 * config.guess: Handle OSF1 running on HPPA processors
3912 * configure: If subdir configure fails, print out a message with
3913 subdirectory name, in case subdir's configure code didn't identify
3918 * configure.in: Remove embedded newlines from configdirs.
3919 Avoid mismatches of substrings. Fix matching strings at end
3922 Fri Feb 11 15:33:33 1994 Stu Grossman (grossman at cygnus.com)
3924 * config.guess: Add Lynx/rs6000 config support.
3928 * configure.in (alpha-dec-osf1*, alpha*-*-*): Build gas.
3932 * configure.in (hppa*-*-osf*): Treat this just like most other
3933 PA configurations (eg no binutils or ld).
3934 (hppa*-*-*elf*): These configurations have binutils and ld.
3942 * configure.in (rs6000-*-*): Build gas.
3946 * Makefile.in: Avoid bug in losing hpux sed.
3950 * Makefile.in, test-build.mk: Remove MUNCH_NM; it was only needed
3951 for GDB and GDB has been fixed to not need it.
3953 Mon Jan 31 18:40:55 1994 Stu Grossman (grossman at cygnus.com)
3955 * config/mh-lynxosrs6k: Account for lack of ranlib!
3959 * config.guess: Recognize vax hosts.
3963 * configure (while loop): Don't use "break 2" inside case
3964 statement -- the case statement isn't an enclosing loop.
3968 * config.guess: Clean up NeXT support, to allow nextstep
3969 on Intel machines. Make OS be nextstep.
3973 * config.guess: Add alternate forms for Convex.
3975 Thu Jan 20 16:13:41 1994 Stu Grossman (grossman at cygnus.com)
3977 * configure: Completely rewrite option processing. Take
3978 advantage of pattern-matching to avoid invoking test frequently.
3979 Also clean up host and target defaulting logic.
3983 * Makefile.in: Replace all occurrances of "rootme" with "r" and
3984 "$${rootme}" with "$$r", to increase the likelihood that the do-*
3985 commands (plus user environment) will fit SCO limits.
3989 * configure.in: Don't issue warnings about directories which are
3990 not being configured if -norecursion is set. Correct test for
3991 --with-gnu-as and --with-gnu-ld to not get confused by substring
3994 * configure.in: Don't build gas for alpha-dec-osf1*.
3996 Tue Jan 4 17:10:19 1994 Stu Grossman (grossman at cygnus.com)
3998 * configure: Back out Per's change of 12/19/1993. It changes the
3999 behavior of configure in unexpected and confusing ways.
4001 Also, use different delim char when calculating
4002 program_transform_name so that the name can contain slashes.
4006 * configure.in, config.sub: Add support for VSTa micro-kernel.
4010 * configure.in: Nuke hacks which were used to get a special
4011 version of GAS for HPPA configurations.
4015 * configure: If only ${target_alias} is given, use that
4016 as the default for ${host_alias}.
4017 * configure: Add missing back-slashes before nested quotes.
4021 * Makefile.in (BASE_FLAGS_TO_PASS): add YACC=$(BISON)
4025 * config.guess: Recognize some Tektronix configurations.
4030 * config.sub: Match any flavor of SH.
4034 * configure.in: Don't try to configure newlib for Alpha.
4038 * configure.in: Don't build ld for Irix 5. Don't build gas,
4039 libg++ or libio for any Alpha target.
4041 * configure.in (mips*-sgi-irix5*): New target; use mh-irix5.
4042 * config/mh-irix5. New file for Irix 5.
4046 * Makefile.in (GZIPPROG): Renamed from GZIP, which gzip uses for
4047 default arguments -- so it tried to compress itself.
4051 * configure.in (notsupp): ensure that a space is always at the end
4052 of the configdirs list, since the grep checks for an explicit space
4056 * configure.in (target i386-sysv4.2): don't build ld, since static
4057 versions of many libraries are not available.
4061 * config.guess: Recognize Apollos (using environment variables).
4062 * configure.in: Don't configure ld, binutils, or gprof for Apollo.
4066 * config.guess: Recognize Sony news mips running newsos.
4070 * Makefile.in (all-cygnus, build-cygnus): "fi else" needs to be
4071 "fi ; else" for bash.
4075 * Makefile.in (BASE_FLAGS_TO_PASS): pass SHELL.
4079 * config.sub: accept unixware as an alias for svr4.2.
4080 Fix some inconsistancies with the gcc version.
4084 * Makefile.in (DISTDOCDIRS): Add gdb.
4088 * Makefile.in (DISTDOCDIRS): Add libg++ and libio.
4092 * Makefile.in (taz): Only build "info" in DISTDOCDIRS.
4093 (DISTDOCDIRS): Don't assume libg++ and gdb folks necessarily want
4098 * config.sub: Accept hiux* as an OS name.
4100 * Makefile.in: Change RUNTEST_FLAGS back to RUNTESTFLAGS per
4101 etc/make-stds.texi. The underscore came from gcc, and dje now
4102 agrees that RUNTESTFLAGS is the correct name.
4106 * install.sh: Remove 'set -e'. It makes any conditionals
4107 in the script useless.
4109 * config.guess: Automatically recognize arm-acorn-riscix
4114 * Makefile.in: Change RUNTESTFLAGS to RUNTEST_FLAGS
4118 * Makefile.in (DISTDOCDIRS): New variable.
4119 (taz): Edit local Makefile.in sooner, instead of proto-toplev
4120 Makefile.in later. Build "info" and "dvi" in DISTDOCDIRS.
4124 * configure.in (hppa target): check the source directory for the
4129 * config.sub: Allow -aout* and -elf*.
4133 * configure.in: Don't build ld on i386-solaris2, same as for
4138 * Makefile.in (taz): Add texinfo/lgpl.texinfo (for libg++).
4142 * configure.in: Configure gdb for alpha.
4146 * Makefile.in (CXXFLAGS): Add -O.
4150 * config.guess: added support for DG Aviion
4154 * configure.in: Produce warning message for subdirectories not
4155 configurable for this host/target combination. Don't try to
4156 configure gdb for vms.
4160 * Makefile.in (taz): Replace "byacc" with "bison -y" in the
4161 appropriate files before making "diststuff".
4162 (DISTBISONFILES): New var: list of files to be edited.
4163 (DISTSTUFFDIRS): Add binutils.
4167 * config.sub: also handle mipsel and mips64el (for little endian mips)
4171 * configure.in: Add * to end of all OS names.
4175 * configure.in: Build newlib for LynxOS native.
4179 * config.guess: Add support for delta 88k running SVR3.
4181 * configure.in: Add comment about HP compiler vs. emacs.
4185 * configure.in: don't build ld on solaris2 (not a viable option
4186 due to bugs in getpwnam & getpwuid)
4190 * configure.in: Accept alpha-dec-osf1*, not just -osf1, since
4191 config.guess will produce a full version number.
4195 * configure.in: Build linker and binutils for alpha-dec-osf1.
4199 * Makefile.in: Remove -O from CXXFLAGS for consistency with CFLAGS,
4200 and gdb/testsuite/Makefile.in.
4204 * configure.in: recognize mips*- instead of mips-
4208 * config.sub: Accept linux*coff and linux*elf as operating
4213 * config.sub: Recognize mips64, and mips3 as an alias for it.
4217 * configure.in: Remove alpha-dec-osf*, no longer necessary now that
4218 gdb knows how to handle OSF/1 shared libraries.
4222 * configure.in: Recognize hppa*-*-hiux* (currently synonym for hpux).
4223 * config.guess: Recognize Hitachi's HIUX.
4224 * config.sub: Recognize h3050r* and hppahitachi.
4225 Remove redundant cases for hp9k[23]*.
4229 * configure.in: default to '--with-gnu-as' and '--with-gnu-ld'
4230 if gas and ld are in the source tree and are in ${configdirs}.
4231 If ${use_gnu_as} or ${use_gnu_ld} are 'no', then don't set the
4232 the --with options (but still pass them down on the command line,
4233 if they were explicitly specified).
4237 * configure: substitute SHELL value in Makefile.in with
4242 * configure.in: Build gas, ld, and binutils for *-*-sysv4* and
4243 *-*-solaris2* targets.
4247 * Makefile.in: define M4, and pass it down to sub-makes;
4248 all-autoconf now depends on all-m4
4252 * Makefile.in ({AR,RANLIB}_FOR_TARGET): make contingent on
4253 presence of {ar,ranlib} instead of a configured directory
4257 * config.guess: Accept 34?? as well as 33?? for NCR.
4261 * configure.in: grab mt-hppa for HPPA targets; use 'gas ' instead
4262 of 'gas' in sed commands, since 'gash' is now in the tree as well.
4266 * configure: grab values for $(CC) and $(CXX) from the
4267 environment, so that someone can do "CC=gcc configure; make" and
4268 have it work right (matching the way that autoconf works now)
4270 * configure.in, Makefile.in: add support for gash, the tcl
4273 * config.guess: add NetBSD variants (hp300, x86)
4277 * install.sh: Support -d option (in the manner of SunOS 4 install,
4278 as it is more deterministic than that of GNU install)
4279 (chmodcmd): Set file to mode 755 by default (should also do default
4280 chgrp and chown, but I don't feel like dealing with that now)
4284 * config.sub: Remove h8300hhms alias.
4288 * configure.in: Match *-*-solaris2* not *-sun-solaris2*.
4292 * Makefile.in (gcc-no-fixedincludes): touch stmp-fixproto as well
4297 * config.sub: recognize m88110-bug-coff.
4301 * Makefile.in (all-libio): all dependencies on the toolchain used
4302 to build this (gcc, gas, ld, etc)
4306 * config.guess: Deal with OSF/1 1.3 on alpha.
4310 * install.sh: add some 'else true' clauses for portability
4312 * configure.in: don't build libio for h8[35]00-*-* targets
4316 * Makefile.in: Add support for new libio.
4320 * install.sh: If one command fails, don't try the rest. Don't try
4321 to remove $dsttmp (via trap) unless we have already created it.
4322 If $src doesn't exist, detect it and exit with an error.
4324 * config.guess: Recognize BSD on hp300.
4328 * config.guess: Map (9000/[34]??:HP-UX:*:*) to m68k-hp-hpux.
4333 * Makefile.in (all-send-pr): depends on all-prms
4337 * config.guess: Fix typo (9000/8??:4.3bsd -> 9000/7??:4.3bsd).
4342 Added test for mips-mips-riscos5.
4346 * configure.in: use mh-hp300 for 68k HP hosts
4350 * configure: add support for CONFIG_SHELL, so that you can use
4351 some alternate shell for evaluating configure scripts
4355 * Makefile.in (make-gdb.tar.gz): Sed bug reporting address
4357 distribution archive.
4358 * Makefile.in (COMPRESS): Remove def.
4359 * Makefile.in (gdb.tar.gz, make-gdb.tar.gz): Renamed from
4360 gdb.tar.Z and make-gdb.tar.Z respectively.
4361 * Makefile.in (make-gdb.tar.gz): Now only build gzip'd archive.
4362 * Makefile.in (make-gdb.tar.gz): Minor changes to move closer
4363 to convergence with 'taz' target in Makefile.in.
4367 * install.sh (dsttmp): use trap to ensure that tmp files go
4368 away on error conditions
4372 * Makefile.in (BASE_FLAGS_TO_PASS): remove LOADLIBES
4376 * Makefile.in (install-dirs): Deal with a prefix like /gnu;
4377 its parent is '/' not ''.
4379 * Makefile.in (DEVO_SUPPORT): Add comments about ChangeLog.
4383 * configure: if ${newsrcdir}/configure doesn't exist, don't assume
4384 that ${newsrcdir}/configure.in does.
4388 * test-build.mk: support for CONFIG_SHELL
4392 * config.sub (netware): Add as a basic system type.
4396 * Makefile.in (Makefile): depend on configure.in. Also drop the
4397 $(srcdir)/ from the dependency on Makefile.in.
4401 * config.sub: Recognize h8300hhms as h8300h-hitachi-hms.
4402 (h8300hhms is temporary until multi-libraries are implemented).
4403 * configure.in: Handle h8300h too.
4407 * config.guess: Recognize dpx/2 as m68k-bull-sysv3.
4411 * configure: Remove extraneous output when guessing host type.
4412 * config.guess: Remove extraneous output when guessing using C
4413 compiler rather than uname, or when guessing fails.
4415 Wed Jul 7 17:58:14 1993 david d `zoo' zuhn (zoo at rtl.cygnus.com)
4417 * Makefile.in: remove all.cross and install.cross targets
4419 * configure: remove CROSS=-DCROSS_COMPILE and ALL=all.cross
4424 * configure.in (target sh): Build gprof.
4426 Thu Jul 1 16:52:56 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4428 * config.sub: change -solaris to -solaris2
4432 * configure.in: Use config/mh-riscos for mips-*-sysv*.
4436 * configure: Correct error message for missing Makefile.in to
4437 print correct directory.
4439 Tue Jun 29 13:52:16 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4441 * install.sh: kludge around 386BSD shell bug
4445 * config.guess: Recognize NeXT.
4446 * config.guess: Recognize i486-ncr-sysv4.
4447 * Makefile.in (taz): rm $(TOOL)-$$VER before linking.
4451 * Makefile.in (MAKEINFOFLAGS): New variable.
4452 (FLAGS_TO_PASS): Pass MAKEINFO as MAKEINFO MAKEINFOFLAGS.
4453 * build-all.mk, test-build.mk: Pass down --no-split as
4454 MAKEINFOFLAGS when hosted on DOS. Compile DOS hosted without -g.
4458 * Makefile.in (DEVO_SUPPORT): Add COPYING COPYING.LIB install.sh.
4462 * Makefile.in (libg++.tar.z): New rule.
4463 * Makefile.in (taz): Replace 'configure -rm' by 'make distclean'.
4464 * Makefile.in (taz): Only do a single chmod.
4466 Fri Jun 18 12:03:10 1993 david d `zoo' zuhn (zoo at majipoor.cygnus.com)
4468 * install.sh: don't use dirname anymore (replaced with sed usage)
4472 * Makefile.in: Change extension for gzip'd files from '.z' to
4473 '.gz' per new FSF standard usage.
4475 Thu Jun 17 16:58:50 1993 david d `zoo' zuhn (zoo at majipoor.cygnus.com)
4477 * configure: put quotes around the final value of program_transform_name
4479 Tue Jun 15 16:48:51 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4481 * Makefile.in: new install.sh support; update install-info rules
4485 * configure.in: Build diff for crosses, but not for go32 host.
4487 * configure.in: Build gprof only for native, and don't build it
4488 for mips-*-*, rs6000-*-*, or i[34]86-*-sco*.
4490 Mon Jun 7 13:12:11 1993 david d `zoo' zuhn (zoo at deneb.cygnus.com)
4492 * configure.in: don't build gas,ld,binutils on for *-*-sysv4
4496 * configure.in (host_tools): Add prms.
4498 Fri Jun 4 13:30:42 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4500 * Makefile.in: install gcc, do installation of $(INSTALL_MODULES)
4501 with $(FLAGS_TO_PASS) on the command line
4503 * config.sub: Recognize lynx and lynxos
4507 * config.sub: Accept -ecoff*, not just -ecoff.
4511 * Makefile.in (taz): Use .gz suffix instead of .z.
4512 (binutils.tar.gz, gas+binutils.tar.gz, gas.tar.gz): Fixed target
4515 Thu Jun 3 00:27:06 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4517 * Makefile.in (vault-install): add an 'else true' (for Ultrix)
4519 Wed Jun 2 18:19:16 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4521 * Makefile.in (install-no-fixedincludes): install gcc last, so
4522 that rebuilds that might happen during 'make install' don't get
4523 bogus gcc include files
4527 Change from Utah for HPPA support:
4528 * config.guess: Recognize hppa1.x-hp-bsd.
4532 * config.guess: Add support for Motorola Delta 68k, up to r3v7.
4535 Tue Jun 1 17:48:42 1993 Rob Savoye (rob at darkstar.cygnus.com)
4537 * config.sub: Add support for rom68k and bug boot monitors.
4541 * Makefile.in: Make all-opcodes depend on all-bfd.
4545 * config.guess: Added special check for i[34]86-univel-sysv4*.
4549 * config.guess: For i[34]86-unknown-sysv4 use UNAME_MACHINE for
4550 the processor rather than assuming i486.
4554 * config.guess: Recognize SunOS6 as Solaris3.
4558 * config.guess: Fix typo. Avoid #elif (not in K&R 1).
4559 Recognize SunOS 5.* only (and not [6-9].*) as being Solaris2.
4563 * build-all.mk (all-cross): New target for Canadian Cross.
4564 Added Q2 go32 targets.
4565 * test-build.mk: Configure go32 cross sparclite-aout and
4566 mips-idt-ecoff -with-gnu-ld. Moved build binary directory from
4567 PARTIAL_HOLE_DIRS to BUILD_HOLES_DIRS.
4569 Mon May 24 15:30:06 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4571 * configure.in: fix Alpha GDB typo; also, don't build DejaGnu for
4572 GO32 hosted toolchains
4574 Mon May 24 14:18:41 1993 Rob Savoye (rob at darkstar.cygnus.com)
4576 * configure: change so "-exec-prefix" gets passed down rather
4577 than "-exec_prefix" so autoconf generated Makefiles get the
4578 exec_prefix set right.
4580 Fri May 21 10:42:25 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4582 * config.guess: get the Solaris2 minor version number
4584 * Makefile.in: add standards.texi and make-stds.texi to ETC_SUPPORT
4588 * config.guess: Recognize some Sequent platforms.
4590 Thu May 20 14:33:48 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4592 * Makefile.in: added the vault-install target
4594 * configure.in: actually use the Sun3 makefile fragment that's in
4595 config, also added the release dir to configdirs
4599 * Makefile.in (taz): Fix modes on stuff in $(TOOL) dir also.
4601 Tue May 18 20:26:41 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4603 * configure.in: remove some program from Alpha targetted toolchains
4607 * Makefile.in (DISTSTUFFDIRS): Renamed from PROTODIRS. Add ld and
4609 (taz): Run "make diststuff" in those directories instead of "make
4610 proto-dir". Look for "VERSION=" only at start of line in subdir
4611 Makefile. Use "gzip -9" for compression.
4612 (TEXINFO_SUPPORT, DIST_SUPPORT, BINUTILS_SUPPORT_DIRS): New vars.
4613 (binutils.tar.z): New target.
4617 * Makefile.in (taz): Include gpl.texinfo.
4621 * Makefile.in (setup-dirs): Merged into "taz" target.
4622 (taz): Only do `proto-dir' stuff if a directory is actually needed
4627 * Makefile.in (MUNCH_NM): New variable, defined to be $(NM).
4628 (FLAGS_TO_PASS): Pass down MUNCH_NM.
4629 (HOST_CC, HOST_PREFIX, HOST_PREFIX_1): New variables.
4630 (EXTRA_GCC_FLAGS): Pass down HOST_* variables.
4631 (gcc-no-fixedincludes): Correct for current gcc Makefile.
4635 * Makefile.in (make-gdb.tar.Z): Add configure, config.guess,
4636 config.sub, and move-if-change to gdb testsuite distribution
4637 archive, so the testsuite can be extracted, configured, and
4638 run separately from the gdb distribution. Blow away the Chill
4639 tests that require a Chill compiled executable, since GNU Chill
4640 is not yet publically available.
4642 Mon May 10 17:22:26 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4644 * test-build.mk: set environment variables in a single command,
4645 instead of a list of assignments and exports
4647 * config.guess: recognize Alpha/OSF1 systems
4651 * configure: Change help message to prefer --options rather than
4656 * config.sub: Convergent Tech. "miniframe" uses m68010, sez
4658 * config.guess: Recognize miniframe.
4660 Sun May 9 17:47:57 1993 Rob Savoye (rob at darkstar.cygnus.com)
4662 * Makefile.in: Use srcroot to find runtest rather than rootme.
4663 Pass RUNTESTFLAGS and EXPECT down in BASE_FLAGS_TO_PASS.
4667 * test-build.mk: Extensive additions to support building on a
4668 machine other than the host.
4672 * configure (tooldir): Fix for i386-aix again.
4676 * configure, Makefile.in: Change definition of $(tooldir)
4681 * config.guess: Recognize i[34]86/SVR4.
4685 * Makefile.in (all-gdb): gdb depends on sim.
4689 * Makefile.in (gdb.tar.Z): Make prototype gdb testsuite directory
4690 at the same time we make the prototype gdb directory.
4691 * Makefile.in (make-gdb.tar.Z): Make the testsuite distribution
4692 files at the same time as the gdb base release distribution.
4696 * Makefile.in (check): Use individual check targets rather than
4702 * config.sub: Use sysv3.2 not sysv32 for canonical OS
4703 for System V release 3.2.
4707 * config.sub: Recognize hppaosf.
4708 * configure.in: Do configure ld/binutils/gas for it.
4712 * configure (tooldir): Alter syntax used to set this, for systems
4713 where "\$" isn't handled right, like i386-aix.
4717 * configure: Pass program-transform-name, not
4718 program_transform_name, to recursive configures.
4722 * Makefile.in (gas+binutils.tar.z): New rule for building snapshots
4727 * config.guess: Recognize AIX3.2 as distinct from 3.1.
4729 Sat Apr 17 17:19:50 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4731 * configure.in: rename m88k-motorola-m88kbcs to m88k-motorola-sysv
4733 * config/mh-delta88: remove extraneous GCC references
4737 * Makefile.in (PRMS): Set back to all-prms.
4741 * test-build.mk: Pass -with-gnu-as for known MIPS native and MIPS
4742 targets, rather than for MIPS hosts.
4744 Fri Apr 9 13:51:06 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4746 * configure.in: add comment for --with-x default values
4748 * config.guess: handle Motorola Delta88 box for SVR3 and SVR4.
4750 * Makefile.in: add check-* targets for each of the directories in
4751 the tree. Add a definition of RUNTEST that will use the one we
4752 just built, if it exists. Pass this down via FLAGS_TO_PASS.
4756 * configure.in: Removed obsolete references to bfd_target and
4757 target_makefile_frag.
4759 * build-all.mk: Set assorted targets for Q2.
4760 * config.sub: Recognize z8k-sim and h8300-hms.
4761 * test-build.mk: Really don't pass host to configure.
4762 (HOLES): Added uname.
4766 * configure: Handle an empty program-prefix, program-suffix or
4767 program-transform-name correctly.
4771 * build-all.mk: -G 8 no longer required for MIPS targets.
4772 * test-build.mk: Don't pass host argument to configure; make it
4777 * Makefile.in (gdb.tar.Z): Fix for building gzip'd distribution.
4778 * Makefile.in (COMPRESS): New macro, like GZIP.
4782 * test-build.mk: Use -with-gnu-as for mips-sgi-irix4 as well.
4784 * build-all.mk: Set GCC to gcc -O -G 8 for MIPS targets, since gcc
4785 with gas currently defaults to -G 0.
4789 * Makefile.in (all-flex): flex depends on byacc.
4791 * build-all.mk: If host not specified, use config.guess. Pass TAG
4792 to test-build.mk as RELEASE_TAG.
4793 * test-build.mk (configargs): New variable containing arguments to
4794 pass to configure. Set to -with-gnu-as on mips-dec-ultrix.
4795 (FLAGS_TO_PASS): Pass down RELEASE_TAG.
4797 * config.guess: Use /bin/uname when checking -X argument on SCO,
4798 to avoid invoking GNU uname which doesn't understand -X.
4800 * test-build.mk: Don't use /usr/unsupported/bin/as on AIX.
4802 * configure.in: Build gas for mips-*-*.
4806 * Makefile.in (all.normal): insert missing backslash.
4810 * build-all.mk, config/mh-irix4: Bump -XNh value to 1500 to match
4813 * Makefile.in: Complete overhaul to merge many almost identical
4818 * Makefile.in (setup-dirs-gdb): Renamed from setup-dirs.
4819 (gdb.tar.Z): Adjusted.
4821 * Makefile.in (setup-dirs, taz): New targets; should be general
4822 enough to adapt for gdb sometime. Build only .z file.
4823 (gas.tar.z): New target.
4827 * build-all.mk: Use CC=cc -Xs on Solaris.
4829 Mon Mar 29 19:59:26 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4831 * config/mh-sun3: cc needs -J to compile cp-parse.c correctly
4833 * config/mh-solaris: SunPRO C needs -Xs to be able to get a
4834 working xmakefile for Emacs.
4839 for handling BISON for FSF releases.
4843 * configure: Actually implement the change zoo just documented.
4845 Wed Mar 24 13:02:44 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
4847 * configure: when using config.guess, only set target_alias when
4848 it's not already been set (ie, on the command line)
4850 Mon Mar 22 23:07:39 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4852 * Makefile.in: add installcheck target, set PRMS to install-prms
4854 Sun Mar 21 16:46:12 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4856 * configure: add support for package_makefile_fragment, handle the
4857 case where a directory has a configure.in file but no Makefile.in
4858 more gracefully (with an actual understandable error message, even);
4859 add support for --without (and add this to the usage message); also
4860 explicitly add a --host=${host_alias} to the command line when
4861 config.guess is used
4865 * configure: Must use both --host and --target in recursive calls.
4869 * Makefile.in: Change deja-gnu to dejagnu.
4873 * configure.in (h8300-*-*, h8500-*-*): Don't build libg++.
4875 Fri Mar 12 18:30:14 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4877 * configure.in: canonicalize all instances to *-*-solaris2*,
4878 also strip out a number of tools to not build for go32 host
4882 * config.guess: add GPL.
4884 * Makefile.in, config.guess, config.sub, configure: bump
4889 * Makefile.in (do-info): Removed obsolete check for existence of
4892 * Makefile.in (MAKEOVERRIDES): Define to be empty.
4894 Wed Mar 10 03:11:56 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4896 * Makefile.in: a couple of 'else true' for decstation,
4899 * configure.in: configure tclX too; don't remove Tk on RS/6000 anymore
4903 * Makefile.in (setup-dirs): change invocation of make to $(MAKE).
4905 Mon Mar 8 14:52:11 1993 Ken Raeburn (raeburn@cambridge)
4907 * config.guess: Recognize i386-ibm-aix (PS/2).
4908 * configure.in: Use config/mh-aix386 file for it.
4912 * Makefile.in (GCC_FOR_TARGET): Eliminated definition; use
4913 CC_FOR_TARGET instead.
4914 (BASE_FLAGS_TO_PASS): Pass GCC_FOR_TARGET=$(CC_FOR_TARGET).
4918 * Makefile.in: Add sim to list of directories sent with gdb
4922 * configure.in: Put back mips-dec-bsd* case.
4927 * configure.in (vax-*-ultrix2*): Add Ultrix 2.2 triplet.
4928 * config.guess: Change 'VAX*:ULTRIX:*:*' to 'VAX*:ULTRIX*:*:*'.
4929 * config/mh-vaxult2: New file.
4931 Tue Mar 2 18:11:03 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4933 * configure.in: remove no-op mips-dec-bsd* in "case $target"
4935 * Makefile.in (dir.info): only run gen-info-dir if it exists,
4936 (install-info): install dir.info only if it exists,
4937 (all-expect, install-expect): pass along X11_FLAGS_TO_PASS
4941 * configure.in: For vms target, skip bfd, ld, binutils. Do build
4942 gas for mips-dec-bsd.
4946 * configure (makesrcdir): If ${srcdir} is relative and not ".",
4947 and ${subdir} is not ".", set makesrcdir based on ${invsubdir}.
4951 * configure.in: Added "dejagnu" to hosttools list.
4955 * config.sub, configure.in, config.guess: Add support
4956 for Bosx, an AIX variant from Bull.
4961 * devo/dejagnu: Initial creation of devo/dejagnu.
4962 Migrated dejagnu testcases and support files for testing software
4963 tools to reside as subdirectories, currently called "testsuite",
4964 within the directory of the software tool. Migrated all programs,
4965 support libraries, etc. beloging to dejagnu proper from
4966 devo/deja-gnu to devo/dejagnu. These files were moved "as is"
4967 with no modifications. The changes to these files which will
4968 allow them to configure, build, and execute properly will be made
4973 * Makefile.in: Change send_pr to send-pr.
4974 * configure.in: Likewise.
4975 * send_pr: Renamed directory to send-pr.
4979 * Makefile.in: Add some extra semi-colons (needed if SHELL=bash).
4983 * README: Update for gdb-4.8 release.
4984 * Makefile.in (gdb.tar.Z): Add texinfo/tex3patch. Build
4985 gdb-xxx.tar.z (gzip'd) file also.
4987 Thu Feb 18 09:16:17 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4989 * Makefile.in: make all-diff depend on all-libiberty
4993 * config.guess: add vax-ultrix in the spirit of mips-ultrix.
4995 Tue Feb 16 05:57:15 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4997 * configure.in, Makefile.in: add hello, tar, gzip, recode, indent
5001 * Makefile.in (DEVO_SUPPORT): Remove etc directory
5002 (ETC_SUPPORT): Only add the files GDB wants from etc/.
5003 (gdb.tar.Z): Use ETC_SUPPORT. Use byacc when building the file.
5005 Thu Feb 11 20:14:28 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5007 * Makefile.in: makeinfo binary is in a new location
5011 * config.sub: Accept -ecoff as an OS.
5013 * Makefile.in: Various changes to eliminate a level of make
5014 recursion and reduce the required command line length.
5015 (BASE_FLAGS_TO_PASS): New variable holding flags passed to all
5017 (EXTRA_HOST_FLAGS, EXTRA_TARGET_FLAGS, EXTRA_GCC_FLAGS): New
5018 variables holding settings for specific sub-makes.
5019 (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS, GCC_FLAGS_TO_PASS): Rewrote
5020 in terms of BASE_FLAGS_TO_PASS.
5021 (TARGET_LIBS): New variable listing directories which use
5022 TARGET_FLAGS_TO_PASS.
5023 (subdir_do): Eliminated.
5024 (do-*): New set of targets to replace subdir_do.
5025 (various): All targets which used subdir_do now depend on do-*.
5026 (local-clean): Renamed from do_clean.
5027 (local-distclean): New target, dependency of distclean and
5029 (install-info): Don't create directories. Depend on dir.info
5030 rather than calling make recursively.
5031 (install-dir.info): Eliminated.
5032 (install-info-dirs): Create all info directories here.
5033 (dir.info): Depend upon do-install-info.
5035 * test-build.mk (HOLES): Added false.
5039 * config.guess: Recognize BSDI and BSDJ (Jolitz 386bsd).
5041 Thu Feb 4 20:49:18 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5043 * Makefile.in (info): remove dependency on all-texinfo. The
5044 problem was really in texinfo/C, not at this level.
5048 * Makefile.in (info): Added dependency on all-texinfo (PR 2112).
5052 * Makefile.in (make-gdb.tar.Z): Change BISON to 'bison -y' for
5057 * configure: Include srcdir in message about target of link not
5058 being found. Don't convert `-' to `_' in `with' options being
5061 Tue Feb 2 18:57:59 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5063 * configure.in: add uudecode to host_tools
5065 * Makefile.in: added {all,install}-uudecode targets, added them to
5066 the appropriate lists
5070 * Makefile.in (all-gcc): Added dependency on all-gas.
5072 * configure.in (mips-*-*): Build ld and binutils.
5076 * configure: check return code from mkdir, print error message and
5081 * Makefile.in (make-gdb.tar.Z): New location for texinfo.tex.
5085 * test-build.mk (HOLES): Added tar, cpio and uudecode.
5089 * config.sub (h8500): Recognize this as a cpu type.
5091 Sat Jan 23 20:32:01 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5093 * configure: source directory missing is no longer a warning
5095 * configure.in: recognize irix[34]* instead of irix[34]
5097 * Makefile.in: define and pass down X11_LIB
5099 * config/mh-sco: define X11_LIB to the mess that SCO ODT requires
5103 * guess-systype: Renamed to ...
5104 * config.guess: ... by popular request.
5105 * configure.in, Makefile.in: Update accordingly.
5110 + Add Convex, Cray/Unicos, and Encore/Multimax support.
5111 + Execute ./dummy instead of assuming . is in PATH.
5115 * guess-systype: New shell script. Attempts to guess the
5116 canonical host name of the executing host.
5117 Only a few hosts are supported so far.
5118 * configure: Call guess-systype if no host is specified.
5122 * Makefile.in (gcc-no-fixedincludes): Made to work with current
5128 * Makefile.in (GCC_FLAGS_TO_PASS): New variable.
5129 (all-gcc, install-gcc, subdir_do): Use it.
5133 * Makefile.in: Rename uninstalled gcc driver from gcc to xgcc.
5137 * Makefile.in: Removed explicit setting of SUBDIRS. SUBDIRS is now
5138 set exclusively by configure, using configure.in .
5140 Wed Jan 6 13:44:11 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5142 * test-build.mk: set $PATH for all builds
5144 * Makefile.in: pass TARGET_FLAGS_TO_PASS for xiberty and libm
5148 * Makefile.in (GCC_FOR_TARGET): Supply a default that matches
5149 the one used in gcc/Makefile.in, so that a null expansion doesn't
5150 override the one needed to build gcc with a native cc.
5155 * configure: Accept -with arguments.
5159 * Makefile.in: added h8300sim
5163 * config/mh-sco: Don't override BISON definition.
5165 * build-all.mk: If canonhost is i386-unknown-sco3.2v4, change it
5166 to i386-sco3.2v4. Set TARGETS and CFLAGS for i386-sco3.2v4.
5167 (all-cygnus, native, build-cygnus): Make
5168 $(canonhost)-stamp-3stage-done, not $(host)....
5169 * test-build.mk (stamp-3stage-compared): Use tail +10c for
5170 i386-sco3.2v4. Added else true to if command.
5174 * config.sub: (from FSF) Sequent uses a BSD-like OS.
5178 * configure.in (i[34]86-*-isc*): added; uses mh-sysv.
5180 Thu Dec 24 17:26:24 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5182 * configure.in: don't remove binutils from Solaris builds
5186 * Makefile.in: get rid of earlier definitions for *clean,
5187 also handle the recursive info rule better
5191 * Makefile.in (mostlyclean, distclean, realclean): Fix to
5192 do more-or-less the right thing.
5196 * Makefile.in: Add lines defining CC and CXX, and use CXX rather
5197 than gcc in definitions of CXX_FOR_BUILD and CXX_FOR_TARGET.
5199 Tue Dec 15 00:34:32 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5201 * Makefile.in: change all $(host_cpu)-$(host_vendor)-$(host_os) to
5204 * configure.in: split the configdirs list into 4 categories (native
5205 v. cross, library v. tool) and handle the cross-only and native-
5206 only in more reasonable (and correct!) way.
5208 Mon Dec 14 17:04:22 1992 Stu Grossman (grossman at cygnus.com)
5210 * configure.in (hppa*-*-*): Don't remove bfd and gdb from
5213 Sun Dec 13 00:37:26 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5215 * Makefile.in: extensive cleanup:: removed all of the explicit
5216 clean-* targets, collapsed many wrappers around subdir_do into
5217 one, added additional targets to satisfy standards.texi, deleted
5218 some old targets, some changes for consistency
5220 Fri Dec 11 20:18:02 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5222 * configure.in: handle some programs as cross-only, and others as
5225 * test-build.mk: handle partial holes in a more generic manner
5227 * Makefile.in: m4 depends on libiberty
5229 Mon Dec 7 06:43:27 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5231 * config/mh-sco: don't default $(CC) to gcc
5233 Thu Dec 3 21:52:11 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5235 * configure.in: add m4, textutils, fileutils, sed, shellutils,
5236 time, wdiff, and find to configdirs
5238 * Makefile.in: all, clean, and install rules for the new programs
5239 added to configure.in
5241 Mon Nov 30 14:54:34 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5243 * configure.in: use mh-sun for all *-sun-* hosts
5245 * config/mh-solaris: rework standard X location to use
5246 $OPENWINHOME, if defined.
5248 * config/mh-sun: handle X11 include locations
5250 * config/mh-decstation: define NeedFunctionPrototypes to 0, to
5251 work around dain-bramaged DECwindows include files
5253 Fri Nov 27 18:35:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5255 * Makefile.in: define flags for X11 include files and library file
5256 locations, pass them down to the programs that need this info
5258 * build-all.mk: added a 'native' target, to 3stage the native toolchain
5260 * config/{mh-hpux,mh-solaris}: define the "standard" locations for
5261 the vendor supplied X11 headers and libraries
5263 Sun Nov 22 18:59:13 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5265 * configure.in: start building libg++ for HP-UX targets
5269 * README: Update references to files moved into etc/.
5273 * config.sub (i386sol2, i486sol2): i[34]86-unknown-solaris2.
5274 * configure.in (i[34]86-*-solaris2*): Use config/mh-sysv4.
5278 * configure: accept dash as well as underscore in long option
5279 names for FSF compatibility.
5283 * config.sub: added -sco3.2v4 support from FSF.
5285 Sun Nov 8 21:14:30 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5287 * configure.in: expand the section that adds or removes
5288 directories from the list of programs to build, to handle native
5289 vs. cross in addition to host v. native
5293 * Makefile.in: Replace C++ in macro names with CXX.
5294 This is less likely to break ...
5296 Sat Nov 7 15:16:58 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5298 * test-build.mk: add -w to GNU_MAKE
5300 Fri Nov 6 23:10:37 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5302 * config.sub: remove 'sparc'-->'sparc-sun' default transformation,
5303 add 'sparc' to list of recognized cpus. This needed to make
5304 'sparc-aout' expand to 'sparc-unknown-aout' instead of 'sparc-sun-aout'.
5305 Delete some redundant ose68 variants. Recognize -wrs as an os,
5306 then changes that into $CPU-wrs-vxworks.
5308 * configure.in: remove most references to gdbtest, regularize
5309 target based program removal
5311 * test-build.mk: import from p3 tree (many fixes and changes)
5315 * Makefile.in: added rules to handle tcl, tk, and expect
5317 * configure.in: handle those directories if they exist
5319 Thu Nov 5 14:35:41 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5321 * config.sub: removed bogus hppabsd and hppahpux names, since
5322 "hppa" is not a valid cpu (hppa1.1 or hppa1.0 are, though)
5324 Thu Oct 29 00:12:41 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5326 * Makefile.in: all-gcc now depends on all-binutils. all-libg++
5327 depends upon all-xiberty
5329 * Makefile.in: changes from p3, including:
5333 * Makefile.in (XTRAFLAGS): include newlib directories if
5334 newlib/Makefile exists, rather than if host != target.
5338 * Makefile.in: added -nostdinc to XTRAFLAGS if we are using gcc
5339 from the same source tree and not building a cross-compiler. This
5340 matters for the libg++ configuration if reconfiguring a tree that
5341 has already been installed.
5345 * Makefile.in: added -I for newlib/targ-include to XTRAFLAGS, to
5346 pick up the machine and system specific header files.
5348 * Makefile.in: added AS_FOR_TARGET, passed down in
5349 TARGET_FLAGS_TO_PASS. Added CC_FOR_BUILD, which is intended to be
5350 the C compiler to use to create programs which are run in the
5351 build environment, set it to default to $(CC), and passed it down
5352 in FLAGS_TO_PASS and TARGET_FLAGS_TO_PASS.
5356 * Makefile.in: add $(host) = $(target) tests back to *_FOR_TARGET.
5357 We need them for unusual native builds, like systems without
5360 * configure: also define $(host_canonical) and
5361 $(target_canonical), which are the full, canonical names for the
5362 given host and target
5366 * Makefile.in: Added separate definitions for C++.
5370 * configure.in (configdirs): Add deja-gnu.
5374 * README: Update for configure.texi and gdb-4.7 release.
5378 * Makefile.in: Move "all" target to top of file.
5379 Previously, first target was ".PHONY" which caused BSD4.4 make
5380 to build .PHONY when make was run without arguments.
5384 * Makefile.in: Add COPYING.LIB to GDB releases, now that there's
5385 Library-copylefted code in libiberty.
5389 * config.sub: Replace m68kmote with plain old m68k.
5393 * Makefile.in: Remove space from blank line, avoid Make complaints.
5397 * config.sub: Complain if no argument is given. Added support for
5398 386bsd as OS and target alias.
5402 * Makefile.in (XTRAFLAGS): include newlib directories if
5403 newlib/Makefile exists, rather than if host != target.
5405 Mon Oct 5 03:00:09 1992 Mark Eichin (eichin at tweedledumber.cygnus.com)
5407 * config.sub: recognize sparclite-wrs-vxworks.
5409 * Makefile.in (install-xiberty): added *-xiberty make rules (from
5410 p3.) Added clean-xiberty to clean.
5412 Thu Oct 1 17:59:19 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5414 * configure.in: use *-*-* instead of nested cases for host and target
5418 * Makefile.in: added -nostdinc to XTRAFLAGS if we are using gcc
5419 from the same source tree and not building a cross-compiler. This
5420 matters for the libg++ configuration if reconfiguring a tree that
5421 has already been installed.
5425 * config.sub (i486v/i486v4): Merge in from FSF version.
5429 * configure: only set PWD if it is already set.
5433 * configure: just set PWD=`pwd` at the top, since Ultrix sh
5434 doesn't have unset and all success paths (and most error paths)
5435 out set it anyway. (Note: should change all uses of ${PWD=`pwd`}
5436 to just ${PWD} to avoid confusion.)
5440 * configure: always set $(tooldir) to $(libdir)/$(target_alias),
5441 even for a native compilation.
5445 Changes to make the gdb.tar.Z rule work better.
5447 * Makefile.in (GDB_SUPPORT_DIRS): Add opcodes.
5448 (DEVO_SUPPORT): Add configure.texi.
5449 (bfd-ilrt.tar.Z): Remove ancient rule.
5453 * Makefile.in: added -I for newlib/targ-include to XTRAFLAGS, to
5454 pick up the machine and system specific header files.
5456 * configure.in, config.sub: added new target m68010-adobe-scout,
5457 with alias of adobe68k. Changed configure.in to check for
5458 -scout before -sco* to avoid a false match.
5460 * Makefile.in: added AS_FOR_TARGET, passed down in
5461 TARGET_FLAGS_TO_PASS. Added CC_FOR_BUILD, which is intended to be
5462 the C compiler to use to create programs which are run in the
5463 build environment, set it to default to $(CC), and passed it down
5464 in FLAGS_TO_PASS and TARGET_FLAGS_TO_PASS.
5468 * Makefile.in: added TARGET_FLAGS_TO_PASS, CC_FOR_TARGET,
5469 AR_FOR_TARGET, RANLIB_FOR_TARGET, NM_FOR_TARGET. Pass
5470 TARGET_FLAGS_TO_PASS, which defines CC, AR, RANLIB and NM as the
5471 FOR_TARGET variants, to newlib and libg++.
5475 * Makefile.in (all-gas, all-gdb): Require all-opcodes to be built
5480 * config.sub: Accept `elf' as an environment.
5484 * Makefile.in (all-opcodes): cd into the right directory
5488 * configure: added -program_transform_name option, used as
5489 argument to sed when installing programs.
5490 configure.texi: added documentation for -program_prefix,
5491 -program_suffix and -program_transform_name.
5495 * config.sub: Accept i486 where i386 ok.
5499 * config.sub: accept we32k
5503 * config.sub, configure.in: accept OSE68000 and OSE68k.
5505 * Makefile.in: don't create all directories for ``make install'';
5506 let the subdirectories create the ones they need.
5508 Tue Aug 11 23:13:17 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5510 * COPYING: new file, GPL v2
5512 Tue Aug 4 01:12:43 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5514 * Makefile.in: use the new gen-info-dir, which needs a template
5515 argument (which also lives in texinfo)
5517 * configure.texi, standards.texi: fix INFO-DIR-ENTRY
5519 Mon Aug 3 15:41:28 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5521 * config/mh-solaris: removed the -xs from CFLAGS (let the people
5522 with Sun's C compiler deal with it themselved)
5526 * config.sub (ncr3000): Change i386 to i486.
5528 Thu Jul 23 00:12:17 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5530 * Makefile.in: add install-rcs, install-grep to
5531 install-no-fixedincludes, removed install-bison and install-libgcc
5535 * configure.in: grab the HPUX makefile fragment if on HPUX
5539 * Makefile.in: eradicate bison spoor (ditto libgcc).
5540 configure.in: recognise m68{k,000}-ericsson-OSE.
5541 es1800 is alias for m68k-ericsson-OSE
5543 Sun Jul 19 17:49:02 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5545 * configure.in: rearrange the parts that remove programs from
5546 configdirs, based now on HOST==TARGET or by canonical triple.
5550 * test-build.mk: recurse explicitly with -f test-build.mk when
5551 appropriate. predicate stage3 and comparison on the existence
5552 of gcc. That is, if gcc isn't around, we aren't three-staging.
5553 On very clean, also remove ...stamp-co. Build in-place before
5558 * Makefile.in, configure.in: add tgas
5562 * Makefile.in: a number of changes merged in from progressive.
5564 * configure.in: add libm.
5566 * .cvsignore: ignore some stuff that comes from test-build.mk.
5568 Wed Jul 8 00:01:30 1992 Stu Grossman (grossman at cygnus.com)
5570 * config/mh-solaris: Use -xs when compiling so that Sun-C puts
5571 a symbol-table into the executable.
5575 * config.sub: Add es1800 (m68k-ericsson-es1800).
5579 * configure: Add program_suffix (parallel to program_prefix)
5580 * Makefile.in: adjust directory-creating script for losing decstation
5584 * configure: Minor $subdir-related fixes.
5588 * configure: fix various problems with propogating
5589 makefile_target_frag in subdirs.
5590 * configure.in: config libgcc if its there
5592 Fri Jun 19 15:19:40 1992 Stu Grossman (grossman at cygnus.com)
5594 * config.sub: HPPA merge.
5598 * config/mh-ncr3000 (INSTALL): Don't use /usr/ucb/install,
5599 it is broken on ncr 3000's.
5601 Sun Jun 14 10:29:19 1992 John Gilmore (gnu at cygnus.com)
5603 * Makefile.in: Replace all-bison with all-byacc in all
5604 dependency lines for other tools (which now use byacc).
5606 Fri Jun 12 22:21:57 1992 John Gilmore (gnu at cygnus.com)
5608 * config.sub: Add sun4sol2 => sparc-sun-solaris2.
5610 Tue Jun 9 17:18:11 1992 Fred Fish (fnf at cygnus.com)
5612 * config/{mh-ncr3000, mh-sysv4}: Add INSTALL.
5616 * Makefile.in: make gprof rules similar to byacc rules (instead of
5617 vestigal $(unsubdir) that didn't work...)
5621 * config.sub: Add support for Linux.
5622 * Makefile.in: Use $(FLAGS_TO_PASS) more consistently
5623 (at least for libg++).
5627 * configure.texi: fix doc for the -nfp option to configure
5631 * Makefile.in (all-binutils): ar needs flex, so depend on all-flex.
5633 Sun May 31 15:04:08 1992 Mark Eichin (eichin at cygnus.com)
5635 * config.sub: changed [^-]+ to [^-][^-]* so that it works under
5636 Sun sed. (BSD 4.3 sed doesn't handle [^-]+ either.)
5637 * configure.in: added solaris* host_makefile_frag hook.
5639 Sun May 31 01:10:34 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5641 * config.sub: changed recognition of m68000 so that various
5642 m68k types can be specified via m680[01234]0
5644 Sat May 30 21:01:06 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5646 * config.sub (basic_machine): fix sed so that '-foo' isn't
5647 completely substituted out while .+'-foo' loses the '-foo'
5651 * config.sub ($os): Add -aout.
5655 * configure: If host_makefile_frag is absolute, don't
5656 prefix ${invsubdir} (relevant to libg++ auto-configure).
5660 * Makefile.in (tooldir): Define it.
5661 (all-ld): Depend on all-flex.
5665 * Makefile.in (check): Fix libg++ special case.
5669 * configure: do not bury `pwd` into config.status, thus do fewer
5672 * configure: print the "Building in" message only when building in
5673 other than "." AND verbose.
5675 * configure: remove -s, rework -v to better accomodate guested
5678 * standards.texi: updated to 3 may, fixed librid <-> libdir typo.
5682 * Makefile.in: macroize flags passed on recursion. remove
5687 * configure: get makesrcdir right for subdirs deeper than 1.
5689 * Makefile.in: pass INSTALL, INSTALL_DATA, INSTALL_PROGRAM on
5694 * Makefile.in: don't print subdir_do or recursion lines.
5698 * standards.texi: added menu item.
5700 * Makefile.in: build and install standards.info.
5702 * standards.texi: new file.
5706 * configure: test for and move config.status pieces from
5711 * config/mh-delta88, config/mh-ncr3000: Replace MINUS_G with
5712 CFLAGS per new configuration strategy.
5713 * configure: Test for existance of files before trying to mv
5714 them, to avoid numerous non-existance messages.
5718 * configure: correct final line of config.status.
5720 * configure: patch from eggert. Avoids a protection problem if
5721 the original Makefile.in is read only.
5723 * configure: use move-if-change from gcc to create config.status.
5724 Some makefiles depend on config.status to tell if a directory
5725 has been reconfigured for a different host. This change
5726 prevents those directories from remaking everything in the case
5727 where the reconfig was only intended to rebuild a Makefile.
5729 * configure: test for config.sub with "config.sub sun4" rather
5730 than "config.sub ${host_alias}". Otherwise we can't tell a bad
5731 host alias from a missing config.sub.
5735 * Makefile.in: explicitly pass CFLAGS on recursion. no longer pass
5736 MINUS_G (this can be done with CFLAGS). Default CFLAGS to -g.
5740 * configure: mkdir ${subdir} as needed.
5744 * Makefile.in,configure.in: added autoconf.
5748 * Makefile.in: no longer pass against on recursion.
5750 * Makefile.in: added .NOEXPORT: so that stray makefile_frag
5751 definitions are not inherited.
5753 * configure: correct makesrcdir when subdir is .
5757 * configure: Add support for 'subdirs' variable, which is
5758 like 'configdirs', except that configure doesn't re-invoke
5759 itself for subdirs, it just creates a Makefile for each subdir.
5760 * configure.texi: Document subdirs.
5762 Mon Apr 13 18:50:16 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5764 * configure.in: added flex to configdirs
5768 * Makefile.in: remove clean-stamps from clean.
5770 Sat Apr 11 03:52:03 1992 John Gilmore (gnu at cygnus.com)
5772 * configure.in: Add gdbtest to configdirs.
5776 * Makefile.in (MINUS_G): Add macro, default to -g, pass on
5778 * configure.in: Recognize new ncr3000 config.
5782 * Makefile.in, configure.in: removed references to gdbm.
5786 * config.sub: Don't canonicalize os value
5787 newsos* to bsd (readline needs to check for newsos).
5788 (This fix was earlier made Jan 31, but got re-broken.)
5790 Mon Apr 6 14:34:08 1992 Stu Grossman (grossman at cygnus.com)
5792 * configure.in: sco is an os, not a vendor!
5794 * configure: Quote $( better. Keep various shells happy.
5798 * Makefile.in: eliminate stamp-files.
5802 * Makefile.in: add send_pr. remove "force" from .stmp-gprof rule.
5803 Supress echoing of all the "if [ -d ... $(MAKE)" lines.
5807 * config.sub: fix iris/iris3.
5811 * configure: re-add -rm.
5815 * Maskefile.in: add .stmp-rcs to all.
5817 * configure.in: remove gas from rs6000 build, use aix host fragment.
5821 * configure: pass down site_option during recursion.
5823 Thu Mar 19 16:49:36 1992 Stu Grossman (grossman at cygnus.com)
5825 * Makefile.in (all.cross): Add .stmp-bfd .stmp-readline.
5829 * configure: Change exec_prefix so that it really defaults to prefix.
5833 * Makefile.in, configure.in: Add support for mmalloc library.
5837 * Makefile.in: add stmp dependencies for a few more things.
5841 * configure: adjusted error message on objdir/srcdir configure
5842 collision, per john's suggestion.
5844 * Makefile.in: add libiberty stmp to all and all.cross.
5848 * Makefile.in: remove force dependencies, add grep to all.
5852 * Makefile.in: drop flex. make stamp files work.
5854 * configure: added test for conflicting configuration in srcdir,
5855 remove trailing slashes from srcdir. Otherwise emacs gdb mode
5856 gets cranky. use relative paths for configure and srcdir
5857 whenever possible. Send some error messages to stderr that were
5862 * Makefile.in: Fix libg++ rule to check for gcc directory
5863 before using gcc/gcc. Also pass XTRAFLAGS.
5865 Thu Mar 5 21:45:07 1992 K. Richard Pixley (rich@sendai)
5867 * Makefile.in: added stmp-files so that directories aren't polled
5868 when they are already built.
5870 * configure.texi: fixed a node pointer problem.
5872 Thu Mar 5 12:05:58 1992 Stu Grossman (grossman at cygnus.com)
5874 * config.sub configure.in config/mh-irix4 gdb/configure.in
5875 gdb/mips-tdep.c gdb/mipsread.c gdb/procfs.c gdb/signame.h
5876 gdb/tm-irix3.h gdb/tm-mips.h gdb/xm-irix4.h gdb/config/mt-irix3
5877 gdb/config/mh-irix4 texinfo/configure.in: Port to SGI Irix-4.x.
5881 * configure: -recurring becomes -silent. corrected help message
5884 * Makefile.in: mkdir $(exec_prefix) and $(tooldir).
5888 * configure: when building Makefile for crosses, replace
5889 tooldir and program_prefix. default srcdir from location of
5890 config.sub. remove "for host in hosts" and "for target in
5895 * Makefile.in: Do not pass bindir or mandir to cvs.
5899 * Makefile.in, configure.in: removed traces of namesubdir,
5900 -subdirs, $(subdir), $(unsubdir), some rcs triggers. Forced
5901 copyrights to '92, changed some from Cygnus to FSF.
5903 * configure.texi: remove most references to multiple hosts,
5904 multiple targets, subdirs, etc.
5906 * configure.man: removed rcsid. reference config.sub not
5909 * Makefile.in: mkdir $(infodir) on install-info.
5911 Wed Feb 19 15:41:13 1992 John Gilmore (gnu at cygnus.com)
5913 * configure.texi: Explain better about .gdbinit and about
5914 the environment that configure.in sections run in.
5916 Fri Feb 7 07:55:00 1992 John Gilmore (gnu at cygnus.com)
5918 * configure.in: Ultrix is only a decstation if it's a MIPS.
5920 Fri Jan 31 21:54:51 1992 John Gilmore (gnu at cygnus.com)
5922 * README: DOC.configure => cfg-paper.texi.
5924 Fri Jan 31 21:48:18 1992 Stu Grossman (grossman at cygnus.com)
5926 * config.sub (near case $os): Don't convert newsos* to bsd!
5928 Fri Jan 31 02:27:32 1992 John Gilmore (gnu at cygnus.com)
5930 * Makefile.in: Reinstall change from gdb-4.3 that reduces
5931 the number of copies of COPYING that go into the GDB tar file.
5933 Thu Jan 30 16:17:30 1992 Stu Grossman (grossman at cygnus.com)
5935 * bfd/configure.in, config/mh-sco, gdb/config/mh-i386sco,
5936 gdb/config/mt-i386v32, gdb/configure.in, readline/configure.in:
5937 Fix SCO configuration stuff.
5939 Tue Jan 28 23:51:07 1992 Per Bothner (bothner at cygnus.com)
5941 * Makefile.in: For libg++, make sure the -I pointing
5942 to the gcc directory goes *after* all the libg++-local -I flags.
5943 Also, move just-gcc dependency from just-libg++ to all-libg++.
5945 Tue Jan 28 12:56:24 1992 Stu Grossman (grossman at cygnus.com)
5947 * configure: Change -x to -f to keep Ultrix /bin/test happy.
5949 Sat Jan 18 17:45:11 1992 Stu Grossman (grossman at cygnus.com)
5951 * Makefile.in (make-gdb.tar.Z): Remove texinfo targets.
5953 Sat Jan 18 17:03:21 1992 Fred Fish (fnf at cygnus.com)
5955 * config.sub: Add stratus configuration frags. Also
5958 Sat Jan 18 15:35:29 1992 Stu Grossman (grossman at cygnus.com)
5960 * Makefile.in (DEV_SUPPORT): add configure.man.
5962 * config.sub(Decode manufacturer-specific): add -none*.
5964 Fri Jan 17 17:58:05 1992 Stu Grossman (grossman at cygnus.com)
5966 * Makefile.in: remove form feeds to make Sun's make happy.
5967 (DEVO_SUPPORT): DOC.configure => cfg-paper.texi.
5969 Sat Jan 4 16:11:44 1992 John Gilmore (gnu at cygnus.com)
5971 * Makefile.in (AR_FLAGS): Make quieter.
5973 Thu Jan 2 22:57:12 1992 John Gilmore (gnu at cygnus.com)
5975 * configure.in: Add libg++.
5976 * configure: When verbose, don't output the command line at each
5977 level; it will be unremarkably the same as the previous version,
5978 which will be the same as what the user typed.
5980 Fri Dec 27 16:26:47 1991 K. Richard Pixley (rich at cygnus.com)
5982 * configure.in, Makefile.in: fix clean-info, add flex. add
5985 * configure: be less sensitive to spaces in Makefile.in. Do not
5986 look for sources in "..". Doing so breaks subdirectories that
5987 might have their own configure. If a subdir has it's own
5988 configure script, use it.
5990 Thu Dec 26 16:30:26 1991 K. Richard Pixley (rich at cygnus.com)
5992 * cfg-paper.texi: some changes suggested by rms.
5994 Thu Dec 26 10:13:36 1991 Fred Fish (fnf at cygnus.com)
5996 * config.sub: Merge in some small additions from the FSF version,
5997 taken from the gcc distribution, to bring the Cygnus and FSF
5998 versions into closer sync.
6000 Fri Dec 20 11:34:18 1991 Fred Fish (fnf at cygnus.com)
6002 * configure.in: Changed svr4 references to sysv4.
6004 Thu Dec 19 15:54:29 1991 K. Richard Pixley (rich at cygnus.com)
6006 * configure: added -V for version number option.
6008 Wed Dec 18 15:39:34 1991 K. Richard Pixley (rich at cygnus.com)
6010 * DOC.configure, cfg-paper.texi: revised, updated, and texinfo'd.
6011 renamed from DOC.configure to cfg-paper.texi.
6013 Mon Dec 16 23:05:19 1991 K. Richard Pixley (rich at rtl.cygnus.com)
6015 * configure, config.subr, config.sub: config.subr is now
6018 Fri Dec 13 01:17:06 1991 K. Richard Pixley (rich at cygnus.com)
6020 * configure.texi: new file, in progress.
6022 * Makefile.in: build info file and install the man page for
6025 * configure.man: new file, first cut.
6027 * configure: find config.subr again now that configuration "none"
6028 has gone. removed all traces of the -ansi option. removed all
6029 traces of the -languages option.
6031 * config.subr: resync from rms.
6033 Wed Dec 11 22:25:20 1991 K. Richard Pixley (rich at rtl.cygnus.com)
6035 * configure, config.sub, config.subr: merge config.sub into
6036 config.subr, call the result config.subr, remove config.sub, use
6039 * Makefile.in: revised install for dir.info.
6041 Tue Dec 10 00:04:35 1991 K. Richard Pixley (rich at rtl.cygnus.com)
6043 * configure.in: add decstation host makefile frag.
6045 * Makefile.in: BISON now bison -y again. also install-gcc on
6046 install. clean-gdbm on clean. infodir belongs in datadir.
6047 Make directories for info install. Build dir.info here then
6050 Mon Dec 9 16:48:33 1991 K. Richard Pixley (rich at rtl.cygnus.com)
6052 * Makefile.in: fix for bad directory tests.
6054 Sat Dec 7 00:17:01 1991 K. Richard Pixley (rich at rtl.cygnus.com)
6056 * configure: \{1,2\} appears to be a sysv'ism. Use a different
6057 regexp. -srcdir relative was being handled incorrectly.
6059 * Makefile.in: unwrapped some for loops so that parallel makes
6060 work again and so one can focus one's attention on a particular
6063 Fri Dec 6 00:22:08 1991 K. Richard Pixley (rich at rtl.cygnus.com)
6065 * configure: added PWD as a stand in for `pwd` (for speed). use
6066 elif wherever possible. make -srcdir work without -objdir.
6067 -objdir= commented out.
6069 Thu Dec 5 22:46:52 1991 K. Richard Pixley (rich at rtl.cygnus.com)
6071 * configure: +options become --options. -subdirs commented out.
6072 added -host, -datadir. Renamed -destdir to -prefix. Comment in
6073 Makefile now at top of generated Makefile. Removed cvs log
6074 entries. added -srcdir. create .gdbinit only if there is one
6077 * Makefile.in: idestdir and ddestdir go away. Added copyrights
6078 and shift gpl to v2. Added ChangeLog if it didn't exist. docdir
6079 and mandir now keyed off datadir by default.
6081 Fri Nov 22 07:38:11 1991 K. Richard Pixley (rich at rtl.cygnus.com)
6083 * Freshly created ChangeLog.
6090 version-control: never