3 * configure.in (i[3456]-*-mingw32*): Don't put gprof in
5 (*-*-cygwin*): Likewise.
10 * Makefile.in (GAS_SUPPORT_DIRS): Add mkdep.
11 (BINUTILS_SUPPORT_DIRS): Add mkdep.
14 * configure (tmpfile): Change cONf$$ to cNf$$ to avoid an overly
15 long file name when using DJGPP on MS-DOS.
19 * Makefile.in (check-target-libio): Remove all-target-libstdc++
20 dependency as this causes "make check" to globally "make all"
24 * Makefile.in (binutils.tar.bz2): Don't pass makeall.bat and
25 configure.bat in SUPPORT_FILES.
26 (gas+binutils.tar.bz2): Likewise.
28 * makeall.bat: Remove; obsolete.
33 * configure.bat: Remove; obsolete.
37 * configure: Add -W -Wall to the default CFLAGS when compiling with
42 * configure.in: Build ld, binutils & gas for hppa*-*-linux-gnu*.
46 * configure.in: Build ld on IRIX6.
50 * Makefile.in: Change distribution targets to use bzip2 instead of
52 (TEXINFO_SUPPORT): Set to just texinfo/texinfo.tex.
53 (taz): Don't use texinfo/gpl.texinfo or texinfo/lgpl.texinfo.
57 * config.sub: Add mcore target.
61 * config.guess (ppc-*-linux-gnu): Also use ld emul elf32ppclinux.
65 * config.sub: Updated to match latest EGCS version.
69 * ltmain.sh: [mode link] Always use CC given by ltconfig.
73 * ltconfig, ltmain.sh: Update to libtool 1.2f.
77 * configure.in (noconfigdirs): Don't build libstub for arm-elf targets.
78 (noconfigdirs): Don't build any bsp stuff for for arm-oabi targets.
79 Bad merge removed these two changes.
83 * configure.in (i?86-*-beos*): Do config gperf; don't config
84 gdb, newlib, or libgloss.
88 * config.sub: Add support for mcore targets.
92 * configure.in (d30v-*): Use config/mt-d30v as makefile fragment,
93 not mt-ospace, in order to shut up assembler warning about using
94 symbols that are named the same as registers.
98 * Makefile.in (all-target-cygmon): Added all-target-bsp to the
99 dependency list for all-target-cygmon.
103 * config-ml.in: Check $host, not $target, for selective multilibs.
104 (arm-*-*): Allow disabling of biendian, h/w fp, 26 bit apcs,
105 thumb interworking, and underscore prefix multilibs.
109 * missing: Update to version from current automake.
113 * configure (gxx_include_dir): Removed.
115 * configure.in (gxx_include_dir): Handle it.
116 * Makefile.in: Likewise.
120 * config.sub (mips64vr4111,mips64vr4111el) Add.
124 * config.guess: Correct typo for detecting ELF on FreeBSD.
128 * config/mh-go32: Delete.
129 * config/mh-djgpp: New. Renamed from mh-go32.
130 * configure.in (pc-msdosdjgpp): Set host_makefile_frag to
135 * Makefile.in (all-target-bsp): Added all-gcc all-binutils and
136 all-target-newlib to dependency list for all-target-bsp.
140 * config.sub: Add i386-uwin support.
141 * config.guess: Likewise.
145 * configure.in: cleanup, add mh-*pic handling for arm, special
150 * configure.in (noconfigdirs): Removed target-libgloss so libnosys.a
155 * configure.in: Added bsp support to arm-*-coff and arm-*-elf
160 * config.sub: Rename CYGNUS LOCAL to EGCS LOCAL
164 * config.sub: Check for "cygwin*" rather than "cygwin32*"
168 * config.sub: Fix typo in arm recognition.
172 * configure.in (noconfigdirs): Changed target_configdirs to
173 include target-bsp only for m68k-*-elf* and m68k-*-coff*
174 rather than m68k-*-* since it is not known to work on
175 m68k-aout. Ditto for arm-*-*oabi.
179 * configure.in (*-*-windows*): Remove, no longer used.
180 * config/mh-windows: Ditto.
184 * config.guess: Automatically recognise ELF on FreeBSD. From Niall
185 Smart and improved by Andrew Cagney.
189 * config.guess: Recognize openbsd-*-hppa.
193 * Makefile.in (REALLY_SET_LIB_PATH): Append $$$(RPATH_ENVVAR)
194 only if it is not empty.
200 * config.guess: Modified to recognize uname's armv* syntax.
202 * config.sub: Modified to recognize uname's armv* syntax.
206 * configure.in: Added target-bsp for sparclite.
210 * config.sub: Recognize alphapca5[67] and up to alphaev8.
214 * configure.in: Add support for strongarm port.
215 * config.sub: Add support for strongarm target.
219 * configure.in (*-*-cygwin32*): Use config/mh-cygwin instead of
220 the old name config/mh-cygwin32.
225 * configure.in: Do build ld for ix86 Solaris.
229 * Makefile.in (EXTRA_GCC_FLAGS): Set AR to $AR instead of
230 $AR_FOR_TARGET. Likewise for RANLIB.
234 * config.sub (oabi): Recognize.
235 * configure.in (arm-*-oabi): Handle.
239 * config.guess: Improve detection of i686 on UnixWare 7.
243 * config.guess: Add support for i386-pc-interix.
244 * config.sub: Likewise.
245 * configure.in: Likewise.
246 * config/mh-interix: New file.
250 * Makefile.in: Remove unneeded all-target-libio from
251 from all-target-winsup target since it is now unneeded.
252 Add all-target-libtermcap in its place since it is now
257 * configure.in: makefile stub for cygwin target is probably
258 unnecessary. Remove it for now.
259 * config/mt-cygwin: Remove.
263 * configure.in: libtermcap.a should be built when cygwin is the
264 target as well as the host.
265 * config.guess: Allow mixed case in cygwin uname output.
266 * Makefile.in: Add libtermcap target.
267 * config/mt-cygwin: New file. libtermcap target info.
271 * configure.in: Add cygmon for x86-coff and x86-elf. Configure
272 cygmon for all sparclite targets, regardless of object format.
276 * configure.in: Added target-bsp for several target architectures.
278 * Makefile.in: Added rules for bsp.
282 * config.sub: Clean up handling of hppa2.0.
286 * config.guess: Use C code to identify more HP machines.
290 * config.sub: Handle hppa2.0.
294 * config.guess: Improve detection of hppa2.0 processors.
298 * config.guess: Recognize FreeBSD using ELF automatically.
302 * configure (skip-this-dir): Add handling for new shell script, which
303 might be created by a sub-directory's configure to indicate, this particular
304 directory is "unwanted".
305 * Makefile.in ($(CONFIGURE_TARGET_MODULES)): Likewise.
310 * ltconfig: import from libtool, after changing libtool to
311 account for the cygwin name change.
315 * Makefile.in: CC_FOR_TARGET and CXX_FOR_TARGET should also
316 include newlib/libc/sys/cygwin and newlib/libc/sys/cygwin32.
320 * configure.in: Add libtermcap to list of cygwin dependencies.
324 * Makefile.in: modify CC_FOR_TARGET and CXX_FOR_TARGET so that
325 they include winsup/include when it's a cygwin target.
329 * configure.in (host_tools): Added zip.
330 * Makefile.in (all-target-libjava): Depend on all-zip.
331 (all-zip): New target.
332 (ALL_MODULES): Added all-zip.
333 (NATIVE_CHECK_MODULES): Added check-zip.
334 (INSTALL_MODULES): Added install-zip.
335 (CLEAN_MODULES): Added clean-zip.
339 * Makefile.in: lose "32" from comment about cygwin.
343 * configure.in: Use -Os to build target libraries for the fr30.
347 * config.sub: Add fr30.
351 * configure.in: drop "32" from config/mh-cygwin32. Check
352 cygwin* instead of cygwin32*.
353 * config.sub: Check cygwin* instead of cygwin32*.
357 * Makefile.in configure.in: Add the ability to use tcl8.1 and tk8.1
362 * config.if (cxx_interface, libstdcxx_interface): Do not try to set
363 these if the appropriate directories and files to not exist.
367 * Makefile.in (DEVO_SUPPORT): Add config.if.
371 * config.sub: Bring back lost sparcv9.
375 * config.sub: Add support for i[34567]86-pc-udk.
376 * configure.in: Likewise.
380 * Makefile.in: add bzip2 package building bits for user
382 * configure.in: ditto
386 * configure.in (target_subdir): Remove duplicate line.
390 * Makefile.in (all-automake): fix dependencies.
394 * configure.in: Minor cleanups for building in the $(target_alias)
399 * Makefile.in (bootstrap): Set r and s before make all. Use
400 BASE_FLAGS_TO_PASS in make all.
405 * Makefile.in (bootstrap): Pass TARGET_FLAGS_TO_PASS to `make all'.
410 * config.sub: Fix typo in last change.
414 * config.sub: Add support for C4x target.
415 * configure.in: Likewise.
419 * config.sub: Recognize sparcv9 just like sparc64.
423 * config.guess: Match "Pent II" or "PentII" for OpenServer.
427 * config.guess: Correctly identify Pentium II sco boxes.
429 * config.guess: Fix "tr" code. From Weiwen Liu.
433 * configure.in: Do not assume x86-svr4 or x86-unixware can handle
438 * Makefile.in (TARGET_CONFIGDIRS): Add libchill.
439 (ALL_TARGET_MODULES): Add all-target-libchill.
440 (CONFIGURE_TARGET_MODULES, CHECK_TARGET_MODULES): Similarly.
441 (INSTALL_TARGET_MODULES, CLEAN_TARGET_MODULES): Similarly.
442 (all-target-libchill): Add dependencies.
443 * configure.in (target_libs): Add libchill.
447 * config.guess: Avoid assumptions about "tr" behaves when
448 LANG is set to something other than English.
452 * configure (gxx_include_dir): Changed to
453 '${prefix}/include/g++'-${libstdcxx_interface}.
455 * config.if: New to determine the interfaces.
459 * config.guess: Detect and handle MPE/IX.
460 * config.sub: Deal with MPE/IX.
464 * configure.in: Use mh-aix43.
468 * configure: Fix --without/--disable cases for gxx-include-dir.
472 * mdata-sh: Imported. Needed for automake support.
476 * Makefile.in (taz): Try "chmod -R og=u ." before
477 "chmod og=u `find . -print`".
481 * configure.in: Add arm-elf and thumb-elf support.
485 * Makefile.in: Undo previous patch.
489 * Makefile.in (INSTALL_TARGET): Move EXTRA_TARGET_HOST_INSTALL_MODULES
491 (install-no-fixedincludes): and here
492 (INSTALL_MODULES): ... from here.
496 * config.sub: Merge with FSF.
498 * config.guess: Merge with FSF.
502 * configure (extraconfigdirs): New variable.
503 (SUBDIRS): Add extraconfigdirs and recurse on them too.
504 * Makefile.in (all): Move higher in file.
505 (EXTRA_TARGET_HOST_ALL_MODULES): New variable.
506 (EXTRA_TARGET_HOST_{INSTALL,CHECK}_MODULES): New variables.
507 (ALL_MODULES): Add EXTRA_TARGET_HOST_ALL_MODULES.
508 (CROSS_CHECK_MODULES): Add EXTRA_TARGET_HOST_CHECK_MODULES.
509 (INSTALL_MODULES): Add EXTRA_TARGET_HOST_INSTALL_MODULES.
513 * Makefile.in (all-target-libjava): Depend on all-gcc and
515 (configure-target-libjava): Depend on $(ALL_GCC).
519 * config.guess: (*-pc-sco3.2v5) Add detection for Pentium II.
520 (*-pc-unixware7) Add detection for Pentium II, Pentium Pro.
524 * ylwrap: Change absolute path checks to check for DOS style path
527 * ylwrap: Don't use a full path name if the source file is in the
530 * config-ml.in: Default to being verbose, to match Feb 18 change to
535 Brought over from egcs:
539 * configure.in (target_subdir): Set to ${target_alias} instead
544 * configure.in (target_subdir): Set to libraries if enable_multilib.
548 * Makefile.in ($(CONFIGURE_TARGET_MODULES)): If there are any
549 multilibs, force reconfiguration the first time we create
550 multilib.out in a subdirectory, in case TARGET_SUBDIR is `.'.
554 * configure.in: Strip any --no option from CONFIG_ARGUMENTS, to
555 avoid confusion with --no-recursion.
559 * configure.in: Win32 hosts shouldn't use install -x
560 * install-sh: remove -x option, and special .exe-handling
565 * config.guess: Recognize i586-pc-beos.
566 * configure.in: Don't build some bits for beos.
570 * configure: If CC is set but CFLAGS is not, and CC is gcc, make
571 CFLAGS default to -O2.
573 * ltmain.sh: Add some hacks to make SunOS --enable-shared work
578 * ltmain.sh: Correct install when using a different shell.
582 * ltconfig, ltmain.sh: Update to libtool 1.2b.
586 * makefile.vms: Update to build binutils/makefile.vms. Add install
591 * ltconfig: Update to correct AIX handling.
595 * Makefile.in (BASE_FLAGS_TO_PASS): Add TARGET_SUBDIR.
597 * configure.in (target_subdir): Set to ${target_alias} instead
602 * Makefile.in (BASE_FLAGS_TO_PASS): Add gcc_version_trigger.
603 (Makefile): Depend on $(gcc_version_trigger).
605 * configure (gcc_version): Change default initializer to empty
607 (gcc_version_trigger): New variable; pass this variable down
608 to subdir configures to enable them checking gcc's version
609 themselves. Emit make macros for both gcc_version vars.
610 (topsrcdir): Initialize reliably.
611 (recursion line): Remove --with-gcc-version=${gcc_version}.
615 * configure (enable_version_specific_runtime_libs): Implement new flag
616 --enable-version-specific-runtime-libs which installs C++ runtime stuff
617 in $(libsubdir); emit definition in each generated Makefile.
618 (gxx_include_dir): Initialize depending on
619 $enable_version_specific_runtime_libs.
623 * configure (gcc_version): Initialize properly depending on
624 how and where configure is started.
625 (recursion line): Pass a --with-gcc-version=${gcc_version}
626 to configures in subdirs.
630 * configure.in (noconfigdirs): Add configure pattern for mips tx39
635 * configure.in: Add cygmon and libstub support for mn10200.
639 * configure (gcc_version): Add new variable describing the
640 particular gcc version we're building.
641 * Makefile.in (libsubdir): Add new macro for the directory
642 in which the compiler finds executables, libraries, etc.
643 (BASE_FLAGS_TO_PASS): Pass down gcc_version, target_alias
648 * Makefile.in (local-clean): remove *.log
649 (warning.log): built with warn_summary from build.log
650 (mail-report.log): run test_summary
651 (mail-report-with-warnings.log): run test_summary including
652 warning.log in the report
656 * config.guess: Detection of Pentium II for *-sco-3.2v5*.
660 * Makefile.in (grep): Grep no longer depends on libiberty.
664 * Makefile.in: all-snavigator needs all-libgui.
668 * configure.in: Add cygmon and libstub support for mn10300.
672 * missing: Update to version from automake 1.3.
674 * ltmain.sh: On installation, don't get confused if the same name
675 appears more than once in the list of library names.
679 * config.sub: Accept m68060 and m5200 as CPU names.
683 * configure: Use && rather than using -a in test, because odd
684 strings can confuse test.
685 * configure.in: Likewise.
689 * ltconfig, ltmain.sh: Bring in Visual C++ support.
693 * Makefile.in (boostrap2-lean, bootstrap3-lean,
694 bootstrap4-lean): new targets
698 * COPYING.LIB: Update FSF address.
702 * ltconfig, ltmain.sh: Update to libtool 1.2a.
704 * Makefile.in (GASB_SUPPORT_DIRS): Remove intl; already included via
709 * ltconfig, ltmain.sh: Avoid producing a version number if
710 -version-info was not used.
714 * configure.in: Add --with-newlib to CONFIG_ARGUMENTS if we are
715 building with newlib.
719 * Makefile.in (EXTRA_GCC_FLAGS): Remove backslash at end;
720 Solaris `make' causes it to continue to next definition.
724 * configure.in: Change alpha to alpha* in several places.
728 * config.sub: Recognize sparc86x.
732 * configure.in (--enable-target-optspace): Remove debug echo.
736 * configure: Set CXXFLAGS from CXXFLAGS, not CFLAGS.
740 * ltconfig: Update cygwin32 support.
742 * Makefile.in (GAS_SUPPORT_DIRS): Add intl.
743 (BINUTILS_SUPPORT_DIRS, GASB_SUPPORT_DIRS): Likewise.
744 (GDB_SUPPORT_DIRS): Likewise.
748 * configure.in (target_makefile_frag): If --enable-target-optspace,
749 use -Os to compile target libraries rather than -O2. Default to
750 using -Os for d10v and m32r if --{enable,disable}-target-optspace is
752 * configure.in (target_cflags): Ditto for d30v.
756 * Makefile.in (all-bfd): Depend on all-intl.
757 (all-binutils): Likewise.
759 (all-gprof): Likewise.
765 * configure.in (host_tools): Fix typo, lbtool -> libtool.
769 * Makefile.in (all-bfd): Depend upon all-libiberty.
771 * ltconfig, ltmain.sh: Bring in newer cygwin32 support.
775 * Makefile.in: Add libstub.
777 * configure.in: Ditto. Build libstub for targets that have cygmon
782 * configure.in: Don't set PICFLAG on ix86-cygwin32.
786 * configure.in: Recognise i[3456]96-*-sysv5* as a valid host, and
787 use mh-sysv5 if specified. Support gprof on SCO Open Server.
791 * configure: Define DEFAULT_M4 by searching PATH.
792 * Makfile.in: Use DEFAULT_M4.
796 * ltconfig: Add cygwin32 support.
798 * Makefile.in, configure.in: Add libtool as a native only directory
799 to configure and build.
803 * Makefile.in (EXTRA_GCC_FLAGS): XFOO lines shortened.
807 * Makefile.in: add ash make rules
808 * configure.in: add ash to native_only and host_tools lists
812 * Makefile.in (all-gettext, all-intl): New targets.
813 (ALL_MODULES): Added all-gettext, all-intl.
814 (CROSS_CHECK_MODULES): Added check-gettext, check-intl.
815 (INSTALL_MODULES): Added install-gettext, install-intl.
816 (CLEAN_MODULES): Added clean-gettext, clean-intl.
818 * configure.in (host_tools): Added gettext.
819 (native_only): Likewise.
820 (noconfigdirs) [various cases]: Likewise.
821 (host_libs): Added intl.
825 * Makefile.in: Revert yesterday's change.
826 (all-target-winsup): all-target-librx stays out of here.
830 * Makefile.in (TARGET_CONFIGDIRS, ALL_TARGET_MODULES,
831 CONFIGURE_TARGET_MODULES, CHECK_TARGET_MODULES,
832 INSTALL_TARGET_MODULES, CLEAN_TARGET_MODULES, all-target-winsup):
833 Remove references to librx and libg++.
837 * Makefile.in (BASE_FLAGS_TO_PASS): Pass $(lispdir) down to
842 * Makefile.in (CC_FOR_TARGET): Use $(TARGET_SUBDIR) when passing -B
843 for newlib directory.
844 (CXX_FOR_TARGET): Likewise.
848 * ltconfig: Update after libtool/ltconfig.in change for
853 * ltconfig, ltmain.sh: Update to libtool 1.2.
857 * Makefile.in (install-gcc): Don't specify LANGUAGES here.
858 (install-gcc-cross): Instead, override LANGUAGES here.
862 * Makefile.in ($(CONFIGURE_TARGET_MODULES)): Set CONFIG_SITE to a
863 non-existent file since /dev/null loses with bash 2.0/autoconf 2.12.
867 * configure.in: Add Thumb-pe target.
870 * Makefile.in - changed sn targets to snavigator
871 * configure.in - changed sn targets to snavigator
875 * config-ml.in: After building symlink tree call make distclean
876 if a Makefile got linked into ${ml_dir}/${ml_libdir}; this happens
877 to be the case for libiberty.
881 * configure: When making link, also check the current
882 directory. The configure scripts may create one.
886 * config.sub: Accept alphapca56 and alphaev6 properly.
890 * configure.in: Revert 3 Jan change for powerpc-linux-gnulibc1.
895 * config.sub (sco5): Fix typo.
899 * Makefile.in (INSTALL_MODULES): Move install-tcl before
901 (install-itcl): Remove dependency on install-tcl.
905 * configure.in: Remove libgloss from noconfigdirs for MN10300.
909 * configure: Don't let builds be done in source tree.
913 * configure.in: Don't build libgui for a cygwin32 target when not on
918 * configure (redirect): Set to null, so default behavior of
919 configure is now --verbose.
923 * Makefile.in ($(CONFIGURE_TARGET_MODULES)): Run configure with
924 CONFIG_SITE=/dev/null to forestall lossage with site configuration.
928 * Makefile.in (BASE_FLAGS_TO_PASS, EXTRA_TARGET_FLAGS): Really add
929 this change to sync Makefile.in with its ChangeLog entries.
933 * ltmain.sh (mkdir): Check that the directory doesn't exist
934 before we exit with error, so that we don't get races during
939 * ltconfig, ltmain.sh: Update from libtool 1.0i.
943 * Makefile.in (BASE_FLAGS_TO_PASS): Don't pass PICFLAG and
945 (EXTRA_TARGET_FLAGS): Don't pass PICFLAG_FOR_TARGET.
947 * configure: Emit a definition for the new macro enable_shared
950 * config/mh-sparcpic (PICFLAG): Define to properly according
951 to current multilib configuration.
952 * config/mt-sparcpic (PICFLAG_FOR_TARGET): Define to properly
953 according to current multilib configuration.
957 * configure.in (host_tools, native_only): Add libtool.
961 * configure.in: add target-gperf to noconfigdirs for Cygwin32.
962 Fix typo in ming config comment.
966 * ltconfig, ltmain.sh: Update from libtool 1.0h.
970 * config.sub: Add tic30 cases, and map c30 to tic30.
974 * configure.in: Remove expect from noconfigdirs when target
975 is cygwin32. OK to build expect and dejagnu with Canadian
980 * configure.in: Do build expect, dejagnu, and cvssrc for a cygwin32
983 * config.guess: Use ${UNAME_MACHINE} rather than i386 for cygwin32
988 * Makefile.in (BASE_FLAGS_TO_PASS): Remove passing $(local_prefix)
989 here as it is not defined in the toplevel Makefile.
993 * configure (package_makefile_rules_frag): New variable, which names
994 a file with generic rules, ...
995 Change comment to mention we now have FIVE parts.
996 * configure: Undo last change.
1000 * config.guess: More accurate determination of HP processor types.
1001 * config.sub: More accurate determination of HP processor types.
1005 * configure (package_makefile_frag): Move inserting the
1006 ${package_makefile_frag} to where it should be according
1011 * config.guess: Add support for Linux/ARM.
1015 * .cvsignore: Remove *-info and *-install since they match
1016 release-info and mpw-install, which we don't want to just ignore.
1020 * configure.in: Revert 3 Jan change for alpha-linux-gnulibc1.
1024 * Makefile.in (FLAGS_TO_PASS): Pass down gcc_include_dir and
1025 local_prefix to sub-make invocations.
1029 * configure.in: Check makefile fragments in the source
1034 * configure.in: check whether host and target makefile
1035 fragments exist before adding them to *_makefile_frag
1039 * configure.in (target_configdirs): Add cygmon for sparc64-elf.
1043 * configure.in: Make sure we only replace RPATH_ENVVAR on
1044 lines which begin with RPATH_ENVVAR, i.e. add "^" to the
1047 * Makefile.in (BASE_FLAGS_TO_PASS): Pass RRPATH_ENVVAR down
1052 * config-ml.in (multi-do): LDFLAGS must include multilib
1057 * config.guess: Recognize i[3456]-i586-UnixWare7-sysv5.
1061 * config.sub: Add mingw32 support.
1062 * configure.in: Likewise.
1063 * mh-mingw32: New file.
1067 * configure.in: Finalize support for {alpha|powerpc}*-*-linux-gnulibc1
1071 * Makefile.in (INSTALL_TARGET): Do install-gcc first.
1072 * configure (gxx_include_dir): Provide a definition for subdirs
1073 which do not use autoconf.
1077 * config.guess: Sync with egcs. Picks up new alpha support,
1078 BeOS & some additional linux support.
1082 * config.guess: HP 9000/803 is a PA1.1 machine.
1087 * configure.in (host_makefile_frag, target_makefile_frag):
1088 Handle multiple config files.
1089 (alpha-*-linux*): Treat alpha-*-linux* as alpha-*-linux* and
1098 * configure.in (d30v-*-*): Allow configuring of libide, vmake, etc.
1102 * Makefile.in: Add libgui directory.
1103 (GDB_TK): Add all-libgui.
1104 * configure.in: Add libgui directory.
1105 * configure: Add all-libgui to GDB_TK.
1109 * config-ml.in (multidirs): Add m32r to multilib list.
1113 * Makefile.in (all-target-gperf): Change dependency to
1114 all-target-libstdc++.
1118 * config.guess: Add BeOS support.
1122 Source directory cvs renamed to cvssrc:
1123 * configure.in (host_tools): Change cvs to cvssrc.
1124 (native_only): Likewise.
1125 (noconfigdirs) [various cases]: Likewise.
1126 * Makefile.in (ALL_MODULES): Change all-cvs to all-cvssrc.
1127 (CROSS_CHECK_MODULES): Change check-cvs to check-cvssrc.
1128 (INSTALL_MODULES): Change install-cvs to install-cvssrc.
1129 (CLEAN_MODULES): Change clean-cvs to clean-cvssrc.
1130 (all-cvssrc): Rename target from all-cvs.
1134 * configure (gxx_include_dir): Fix thinko.
1138 * Makefile.in (INSTALL_TARGET_CROSS): Define.
1139 (install-cross, install-gcc-cross): New targets.
1143 * configure.in (noconfigdirs): Add support for Thumb target.
1145 * config.sub (maybe_os): Add support for Thumb target.
1149 * Makefile.in: Add rules for cygmon.
1151 * configure.in: Build cygmon for sparc-elf and sparclite-aout.
1155 * Makefile.in (INSTALL_TARGET): Do install-gcc first.
1156 * configure (gxx_include_dir): Provide a definition for subdirs
1157 which do not use autoconf.
1161 * Makefile.in, configure, configure.in, ChangeLog: merge with foundry's
1167 * config.guess (powerpc*-*-linux): Handle glibc2 beta release
1168 found on RedHat Linux systems.
1172 * config.guess (alpha stuff): Merge with FSF to avoid incorrect
1177 * configure.in (i[3456]86-ncr-sysv4.3*): Tweak.
1181 * ltmain.sh: If mkdir fails, check whether the directory was created
1182 anyhow by some other process.
1186 * configure.in (d30v-*-*): Configure all directories.
1190 * configure.in (d30v-*-*): Configure newlib, libiberty directories
1195 * configure.in (d30v-*-*): Configure target-libgloss on the D30V.
1199 * include/libiberty.h: Add extern "C" { so it can be used with C++
1201 * include/remote-sim.h: Add extern "C" { so it can be used with C++
1206 * configure.in (d30v-*-*): Configure GCC now.
1210 * configure.in: Remove a "second pass" of tweaking noconfigdirs,
1211 is no longer needed.
1215 * Makefile.in: check-target-libio depends on all-target-libstdc++.
1219 * Makefile.in (bootstrap-lean): Combined with `normal' bootstrap
1220 targets using "$@" to provide support for similar but not identical
1221 targets without having to duplicate code.
1225 * makefile.vms: Fix to work with DEC C.
1229 * config.sub: Add mips-tx39-elf to marketing names.
1233 * ltmain.sh: Handle symlinks in generated script.
1237 * configure: Handle autoconf style directory options: --bindir,
1238 --datadir, --includedir, --infodir, --libdir, --libexecdir,
1239 --mandir, --oldincludedir, --sbindir, --sharedstatedir,
1241 * Makefile.in (sbindir, libexecdir, sysconfdir): New variables.
1242 (sharedstatedir, localstatedir, oldincludedir): New variables.
1243 (BASE_FLAGS_TO_PASS): Pass down bindir, datadir, includedir,
1244 infodir, libdir, libexecdir, localstatedir, mandir, oldincludedir,
1245 sbindir, sharedstatedir, and sysconfdir.
1249 * Makefile.in (bootstrap-lean): New target.
1253 * configure.in (d30v): Remove tcl, tk, expect, gdb, itcl, tix, db,
1254 sn, and gnuserv from noconfigdirs.
1258 * ltmain.sh: Tweak shell pattern to avoid bug in NetBSD /bin/sh.
1262 * Makefile.in (cross): New target.
1267 * Makefile.in (bootstrap2, bootstrap3): New targets.
1268 (all-bootstrap): Remove outdated and confusing target.
1269 (bootstrap, bootstrap2, bootstrap3): Don't pass BOOT_CFLAGS down.
1274 * config/mt-linux: Define CXXFLAGS to make sure -fvtable-thunks is
1276 * configure.in: Name Linux target fragment.
1278 * configure: Rewrite so that project Makefile fragment is inserted
1279 first and appears last in the resulting Makefile.
1283 * Makefile.in (install-itcl): Install tcl first.
1287 * config/mh-cygwin32: ok to build split texinfo files
1291 * configure.in: remove bison from noconfigdirs for Cygwin32 host
1295 * Makefile.in (local-distclean): Also remove mh-frag mt-frag.
1297 * configure.in (skipdirs): Add target-librx for Linux.
1298 (alpha-*-linux*): Use config/mh-elfalphapic and config/mt-elfalphapic.
1302 * Makefile.in (bootstrap): New target.
1306 * config.sub: Accept 'amigados' for backward compatability.
1310 * config.guess: Merge with FSF.
1314 * config.sub: Add "marketing-names" patch.
1318 * configure.in (*-*-rtems*): Do not build libgloss for rtems.
1322 * config.sub: Handle v850-elf.
1326 * ltconfig: Set CONFIG_SHELL in libtool.
1327 * ltmain.sh: Use CONFIG_SHELL instead of /bin/sh
1331 * configure.in (target_subdir): Set to libraries if enable_multilib.
1335 * config.guess: Update from gcc directory.
1339 * Makefile.in (all-sim): Depends on all-readline.
1343 * Makefile.in (BISON, YACC): Use $$s.
1344 (all-bison): Depend on all-texinfo.
1348 * Makefile.in (BISON): Add -L flag.
1353 * configure.in (noconfigdirs): Add support for v850e target.
1355 * config.sub (maybe_os): Add support for v850e target.
1359 * configure.in (noconfigdirs): Add support for v850ea target.
1361 * config.sub (maybe_os): Add support for v850ea target.
1365 * config.sub: Add mipstx39. Delete r3900.
1369 * Makefile.in (all-autoconf): Depends on all-texinfo.
1373 * config-ml.in ({powerpc,rs6000}*-*-*): Update to current AIX and
1378 * configure: Get CFLAGS and CXXFLAGS from Makefile, if possible.
1380 * configure: When handling a Canadian Cross, handle YACC as well as
1381 BISON. Just set BISON to bison. When setting YACC, prefer bison.
1382 * Makefile.in (all-bison): Depend upon all-texinfo.
1386 * Makefile.in (BISON): bison, not byacc or bison -y.
1387 (YACC): bison -y or byacc or yacc.
1388 (various): Add *-bison as appropriate.
1389 (taz): No need to mess with BISON anymore.
1393 * configure: If OSTYPE matches *win32*, try to find a good value for
1398 * Makefile.in (taz): Get the version number from AM_INIT_AUTOMAKE in
1399 configure.in if it is present.
1403 * Makefile.in (LD_FOR_TARGET): Change ld.new to ld-new.
1407 * config.sub: Recognize `arc' cpu.
1408 * configure.in: Likewise.
1409 * config-ml.in: Likewise.
1413 * Makefile.in ($(INSTALL_X11_MODULES)): Depend upon installdirs.
1417 * configure: Changed sed delimiter from ':' to '|' when
1418 attempting to substitute ${config_shell} for SHELL. On
1419 NT ${config_shell} may contain a ':' in it.
1423 * Makefile.in (EXTRA_GCC_FLAGS): Fix for non-bash shells.
1427 * Makefile.in (AS_FOR_TARGET): Change as.new to as-new.
1431 * Makefile.in (NM_FOR_TARGET): Change nm.new to nm-new.
1433 * ylwrap: If the program is a relative path, force it to be
1438 * configure (tooldir): Set BISON to `bison -y' and not just bison.
1442 * Makefile.in (CC_FOR_TARGET): When winsup/Makefile present,
1443 correctly specify the target build directory $(TARGET_SUBDIR)/winsup
1448 * Makefile.in (EXTRA_GCC_FLAGS): Fix handling of macros with values
1449 separated by spaces.
1454 * Makefile.in (DEVO_SUPPORT): Add ylwrap.
1456 * ltmain.sh: Handle /bin/sh at start of install program.
1458 * Makefile.in (DEVO_SUPPORT): Add ltconfig, ltmain.sh, and missing.
1460 * ltconfig, ltmain.sh: New files, from libtool 1.0.
1461 * missing: New file, from automake 1.2.
1465 * Makefile.in: Treat tix like tk, putting it in X11_MODULES. Add
1466 check-tk to CHECK_X11_MODULES.
1470 * config.sub: Merge with FSF.
1474 * config.guess: Merge with FSF.
1478 * configure: Treat msdosdjgpp like go32.
1479 * configure.in: Likewise. Don't remove gprof for go32.
1481 * configure: Change Makefile.tem2 to Makefile.tm2.
1485 * configure.in (noconfigdirs): For alpha-dec-osf*, don't ignore grep.
1489 * install-sh (chmodcmd): Set to null if the DST directory already
1490 exists. Same as Nov 11th change.
1494 * configure (GDB_TK): Needs itcl and tix.
1498 * config.guess: Update from FSF.
1502 * Makefile.in (GDB_TK): Depend on itcl and tix.
1506 * Makefile.in (INSTALL_PROGRAM_ARGS): New variable.
1507 (INSTALL_PROGRAM): Use $(INSTALL_PROGRAM_ARGS).
1508 (INSTALL_SCRIPT): New variable.
1509 (BASE_FLAGS_TO_PASS): Pass down INSTALL_SCRIPT.
1510 * configure.in: If host is *-*-cygwin32*, set INSTALL_PROGRAM_ARGS
1512 * install-sh: Add support for -x option.
1516 * configure.in, Makefile.in: Treat tix like itcl.
1520 * Makefile.in (WINDRES): New variable.
1521 (WINDRES_FOR_TARGET): New variable.
1522 (BASE_FLAGS_TO_PASS): Add WINDRES_FOR_TARGET.
1523 (EXTRA_HOST_FLAGS): Add WINDRES.
1524 (EXTRA_TARGET_FLAGS): Add WINDRES.
1525 (EXTRA_GCC_FLAGS): Add WINDRES.
1526 ($(DO_X)): Pass down WINDRES.
1527 ($(CONFIGURE_TARGET_MODULES)): Set WINDRES when configuring.
1528 * configure: Treat WINDRES like DLLTOOL, and WINDRES_FOR_TARGET like
1533 * configure.in: configure sim before gdb for win32-x-ppc
1537 Move gperf into the toplevel, from libg++.
1538 * configure.in (target_tools): Add target-gperf.
1539 (native_only): Add target-gperf.
1540 * Makefile.in (all-target-gperf): New target, depend on
1542 (configure-target-gperf): Empty rule.
1543 (ALL_TARGET_MODULES): Add all-target-gperf.
1544 (CONFIGURE_TARGET_MODULES): Add configure-target-gperf.
1545 (CHECK_TARGET_MODULES): Add check-target-gperf.
1546 (INSTALL_TARGET_MODULES): Add install-target-gperf.
1547 (CLEAN_TARGET_MODULES): Add clean-target-gperf.
1551 * config.sub (mn10200): Recognize new basic machine.
1555 * configure.in: Don't set ENABLE_MULTILIB, so we'll be passing
1556 --enable-multilib down to subdirs; setting TARGET_SUBDIR was enough.
1560 * configure.in: If we're building mips-sgi-irix6* native, turn on
1561 ENABLE_MULTILIB and set TARGET_SUBDIR.
1565 * Makefile.in (all-sn): Depend on all-grep.
1569 * configure.in: Use mh-ppcpic and mt-ppcpic for powerpc*-* targets.
1571 * configure: Set CFLAGS and CXXFLAGS, and substitute them into
1573 * Makefile.in: Add comment for CFLAGS and CXXFLAGS.
1575 * Makefile.in (DISTBISONFILES): Remove.
1576 (taz): Don't futz with DISTBISONFILES. Change BISON to use
1579 * configure.in: Build itl, db, sn, etc., when building for native
1582 * Makefile.in (LD): New variable.
1583 (EXTRA_HOST_FLAGS): Pass down LD.
1584 ($(DO_X)): Likewise.
1588 * Makefile.in (INSTALL): Use $(SHELL) when executing install-sh.
1592 * configure.in (targargs): Strip out any supplied --build argument
1593 before adding our own. Always add --build.
1597 * configure.in (targargs): Pass --build if we're doing
1602 * configure: Use '|' instead of ":" as the seperator in
1603 sed. Otherwise sed chokes on NT path names with drive
1604 designators. Also look for "?:*" as the leading characters in an
1609 * config.sub: Support for r3900.
1613 * configure.in: Use install-sh, not install.sh.
1617 * Makefile.in (taz): Improve check for BISON so it doesn't try to
1622 * Makefile.in (INSTALL_MODULES): Put install-opcodes before
1627 * Makefile.in: Add automake targets.
1628 * configure.in (host_tools): Add automake.
1632 * configure: Default CXX to c++, not gcc.
1633 * Makefile.in (CXX): Set to c++, not gcc.
1634 (CXX_FOR_TARGET): When cross, transform c++, not gcc.
1638 * install-sh: try appending a .exe if source file doesn't
1643 * configure.in: Turn on multilib by default.
1644 (cross_only): Remove target-libiberty.
1646 * Makefile.in (all-gcc): Don't depend on libiberty.
1650 * config.guess: improve algorithm for recognizing Gnu Hurd x86.
1654 * Makefile.in (DEVO_SUPPORT): Add mpw-install.
1655 (DISTBISONFILES): Add ld/Makefile.in
1659 * configure.in: if target is cygwin32 but host isn't cygwin32,
1660 don't configure gdb tcl tk expect, not just gdb.
1664 * configure.in: Added gnuserv everywhere sn appears.
1666 * Makefile.in (ALL_MODULES): Added all-gnuserv.
1667 (CROSS_CHECK_MODULES): Added check-gnuserv.
1668 (INSTALL_MODULES): Added install-gnuserv.
1669 (CLEAN_MODULES): Added clean-gnuserv.
1670 (all-gnuserv): New target.
1674 * config.guess: Fixes for MIPS OpenBSD systems.
1678 * Makefile.in (INSTALL_XFORM): Remove.
1679 (BASE_FLAGS_TO_PASS): Remove INSTALL_XFORM.
1681 * mkinstalldirs: New file, copied from automake.
1682 * Makefile.in (installdirs): Rename from install-dirs. Use
1683 mkinstalldirs. Change all users.
1684 (DEVO_SUPPORT): Add mkinstalldirs.
1688 * install-sh: Rename from install.sh.
1689 * Makefile.in (INSTALL): Change install.sh to install-sh.
1690 (DEVO_SUPPORT): Likewise.
1692 * configure: Use ${config_shell} with ${moveifchange}. From Thomas
1697 * config.guess: Recognize OpenBSD systems correctly.
1701 * README, Makefile.in (ETC_SUPPORT): Remove references to
1702 cfg-paper*, configure.{texi,man,info*}._
1706 * Makefile.in (all.normal): Ensure that gcc is built after all
1707 the x11 - ie gdb - targets.
1711 * makefile.vms: Don't run conf-a-gas.
1715 * configure.in (hppa1.1-*-rtems*): New target, like hppa-*-*elf*.
1719 * configure.in: Remove noconfigdirs case since gdb also
1720 configures and builds for tic80-coff.
1724 * configure: Set cache_file to config.cache.
1725 * Makefile.in (local-distclean): Remove config.cache.
1729 * COPYING: Update FSF address.
1733 * configure.in (tic80-*-*): Remove G++ libraries and libgloss from
1738 * Makefile.in (install-dirs): Don't crash if prefix, and hence
1743 * config.sub: Tweak mn10300 entry.
1747 * configure.in (host_tools): Put sim before gdb, so gdb's
1748 configure.tgt can determine if the simulator was configured.
1752 * config.sub: Move BeOS $os case to be with other Cygnus
1757 * config.sub: Remove misplaced comment that broke Linux.
1761 * config.sub: Add BeOS support.
1765 * Makefile.in (CHECK_X11_MODULES): Don't run check-tk.
1769 * configure.in (noconfigdirs): Remove tcl and tk from
1770 noconfigdirs for cygwin32 builds.
1774 * configure.in (tic80-*-*): Remove ld from noconfigdirs.
1778 * Makefile.in (GAS_SUPPORT_DIRS, BINUTILS_SUPPORT_DIRS): Remove
1779 make-all.com, use makefile.vms instead.
1783 * config.sub: Accept -lnews*.
1787 * configure.in (noconfigdirs): Disable target-newlib,
1788 target-examples and target-libiberty for d30v.
1792 * configure.in (noconfigdirs): Enable ld for d30v.
1796 * configure.in (tic80-*-*): Build compiler.
1800 * configure.in (d30v-*): Remove sim directory from list of
1801 unsupported d30v directories
1805 * config.sub, configure.in: Add d30v target cpu.
1809 * makefile.vms: New file.
1810 * make-all.com: Remove.
1814 * Makefile.in (EXTRA_GCC_FLAGS): Add LIBGCC2_DEBUG_CFLAGS.
1818 * Makefile.in (all-itcl): The rule is all-itcl, not all-tcl.
1822 * Makefile.in (ALL_MODULES): Added all-db.
1823 (CROSS_CHECK_MODULES): Addec check-db.
1824 (INSTALL_MODULES): Added install-db.
1825 (CLEAN_MODULES): Added clean-db.
1829 * config.guess: Merge with latest FSF sources.
1833 * Makefile.in (ALL_MODULES): Added all-itcl.
1834 (CROSS_CHECK_MODULES): Added check-itcl.
1835 (INSTALL_MODULES): Added install-itcl.
1836 (CLEAN_MODULES): Added clean-itcl.
1840 * configure.in: build gdb for mn10200
1844 * Makefile.in (all-target-winsup): Depend on all-target-libio.
1848 * configure.in (tic80-*-*): Turn off most targets right now.
1852 * Makefile.in (MAKEINFO): Check for the existence of the Makefile,
1853 rather than the makeinfo program.
1854 (do-info): Depend upon all-texinfo.
1858 * configure.in: Remove uses of config/mh-linux.
1860 * config.sub, config.guess: Merge with latest FSF sources.
1864 * config.sub (case $basic_machine): Add tic80 entries.
1868 * config.sub, config.guess: Merge with latest FSF sources.
1872 * mpw-build.in: Build ld before gcc, use NewFolderRecursive.
1873 * mpw-config.in: Test for NewFolderRecursive.
1874 * mpw-install: Use symbolic name for startup filename.
1875 * mpw-README: Add various additional details.
1879 * configure.in (mips*-sgi-irix6*): Remove binutils from noconfigdirs.
1883 * configure.in: Do build gcc and the target libraries for
1888 * configure.in: don't avoid building gdb for mn10300 any more
1889 * Makefile.in: double-quote GCC_FOR_TARGET line in EXTRA_GCC_FLAGS
1890 instead of single-quoting it.
1894 * configure.in: Don't use --with-stabs on IRIX 6.
1898 * configure.in (m32r): Build gdb, libg++ now.
1902 * configure.in (mips*-sgi-irix6*): Remove gdb and related
1903 directories from noconfigdirs.
1907 * config.sub (basic_machine): added mips16 configuration
1911 * config.sub: Handle d10v-unknown.
1915 * config.sub: Handle v850-unknown.
1919 * Makefile.in: add findutils
1920 * configure.in: add findutils to list of host_tools
1924 * config.sub: Handle mn10200 and mn10300.
1928 * configure.in (d10v-*): Do not build librx.
1932 * configure.in (mn10300): Build everything except gdb & libgloss.
1936 * config.guess: Patch for Dansk Data Elektronik servers,
1939 For ncr, use /bin/uname rather than uname, since GNU uname does not
1942 Patch for MIPS R4000 running System V,
1945 Fix thinko for nextstep.
1950 * config.guess: Guess mips-dec-mach_bsd4.3.
1953 * config.guess (i?86-ncr-sysv*): Emit just enough of the minor
1955 * config.guess (mips-mips-riscos*): Emit just enough of the
1959 * config.guess (sparc-auspex-sunos*): Added.
1960 (f300-fujitsu-*): Added.
1963 * config.guess: Recognize a Tadpole as a sparc.
1967 * config.guess: Don't assume that NextStep version is either 2 or
1968 3. NextStep 4 (aka OpenStep 4) has come out now.
1972 * config.guess: Support Cray T90 that reports itself as "CRAY TS".
1977 * config.sub: Contributions from bug-gnu-utils to:
1978 Support plain "hppa" (no version given) architecture, reported by
1980 OpenBSD like NetBSD.
1981 LynxOs is not a hardware supplier.
1983 * config.guess: Contributions from bug-gnu-utils to add support for:
1984 OpenBSD like NetBSD.
1986 More Pyramid systems.
1987 i[n>4]86 Intel chips.
1988 M680[n>4]0 Motorola chips.
1989 Use unknown instead of lynx for hardware manufacturer.
1993 * install.sh (chmodcmd): Set to null if the DST directory already
1998 * configure.in (powerpc*-{eabi,elf,linux,rtem,sysv,solaris}*): Do
1999 not use mt-ppc target Makefile fragment any more.
2003 * configure.in (*-*-windows): Exclude everything but those dirs
2004 needed to build windows.
2008 * Makefile.in (all-target-winsup): Depend on all-target-librx.
2012 * configure.in: Exclude mmalloc from i386-windows.
2013 * config/mh-windows: Add rules for building MSVC makefiles.
2017 * Undo my previous change.
2021 * Makefile.in (EXTRA_GCC_FLAGS): Pass down GCC_FOR_TARGET
2023 (MAKEOVERRIDES): Define (revert this part of October 18 change).
2027 * Makefile.in (FLAGS_TO_PASS): Add $(HOST_FLAGS) to allow the
2028 host to add it's own flags.
2029 * config/mh-windows (HOST_FLAGS): Set srcroot, which is needed
2030 for MSVC build procedure.
2034 * configure: Handle GCC_FOR_TARGET like CC_FOR_TARGET.
2038 * Makefile.in (CC_FOR_TARGET): Check for xgcc, not Makefile.
2039 (CXX_FOR_TARGET): Likewise.
2040 (GCC_FOR_TARGET): Define.
2041 (BASE_FLAGS_TO_PASS): Remove GCC_FOR_TARGET.
2042 (EXTRA_GCC_FLAGS): Define GCC_FOR_TARGET based on whether
2043 CC_FOR_TARGET was specified on the command line.
2044 (MAKEOVERRIDES): Don't define.
2048 * configure.in (m32r): Fix spelling of libg++ libs.
2052 * config.sub (-apple*): Remove, now redundant.
2056 * configure: Don't get confused by CPU-VENDOR-linux-gnu.
2058 * configure: Rework yesterday's sed script patch.
2060 * config.sub: Merge with FSF.
2064 * config.guess: Merge from FSF.
2067 * config.guess: Use pc instead of unknown, for pc clone systems.
2068 Change linux to linux-gnu.
2071 * config.guess: Avoid non-portable tr syntax.
2075 * test-build.mk (HOLES): Add "xargs" for gdb.
2077 * configure: Avoid hpux10.20 sed bug.
2081 * configure.in config/mh-windows: Add support for windows host
2082 (that is a build done under the Microsoft build environment).
2086 * Makefile.in: Replace all uses of srcroot with s, to shrink
2087 command line lengths.
2090 * configure.in: If configuring for newlib, pass --with-newlib to
2092 * Makefile.in (CC_FOR_TARGET): If winsup/Makefile exists, pass a
2093 -Bnewlib/ and -Lwinsup to gcc.
2094 (CXX_FOR_TARGET): Likewise.
2098 * Makefile.in (ETC_SUPPORT): Add configure.
2102 * configure.in: Use config/mh-dgux386 for i[345]86-dg-dgux
2103 host configuration file.
2107 * configure.in: Break mn10x00 support into separate
2108 mn10200 and mn10300 configurations.
2109 * config.sub: Likewise.
2113 * configure.in: Add lots of stuff to noconfigdirs for
2114 the mn10x00 targets.
2116 * config.sub, configure.in: Add mn10x00 support.
2120 * make-all.com: Call conf-a-gas, not config-a-gas.
2124 * configure.in (noconfigdirs): Don't build libgloss for arm-coff
2129 * mpw-README: Add much more detail for native PowerMac.
2130 * mpw-install: New file.
2131 * mpw-configure: Add --norecursion and --help options.
2132 * mpw-config.in: Translate readme and install files when
2134 * mpw-build.in: Don't always depend on byacc and flex.
2135 (install-only-top): New action.
2139 * configure.in: You can now configure GDB for the v850.
2143 * configure.in (noconfigdirs): Don't configure any C++ dirs
2148 * config.sub: Recognize mips64vr5000.
2152 * configure.in: Use a single line for host_tools and native_only.
2156 * config.sub, configure.in: Add entries for m32r.
2160 * Makefile.in (inet-install): Don't run install-gzip.
2164 * configure.in: Don't config lots of things for *-*-windows*.
2168 * mpw-config.in: Test for mpw-true, true, and null-command scripts.
2169 (host_libs, host_tools): Copy from configure.in.
2170 * mpw-configure: Don't complain about directories not found.
2174 * configure.in (i[345]86): Recognize i686 for pentium pro.
2175 (i[3456]86-*-dgux*): Use config/mh-sysv for the host configuration
2178 * config.guess (i[345]86): Ditto.
2182 * configure.in (noconfigdirs): Removed gdb for D10V.
2186 * configure.in: Remove ld, target-libio, target-libg++, and
2187 target-libstdc++ from noconfigdirs.
2191 * configure: Fix three locations where shell scripts were
2192 being run directly rather than with config_shell.
2196 * configure.in (v850-*-*): Set up initial $noconfigdirs.
2197 * config.sub (basic_machine): Recognize v850.
2201 * mpw-configure: Handle multiple enable/disable options and
2202 pass them down recursively, handle -c and -s flags appropriately
2203 depending on choice of compiler, add escape mechanism for
2204 quoted arguments to gC.
2208 * configure.in (powerpc*-*-*): For eabi, system V.4, Linux, and
2209 solaris targets, use config/mt-ppc to set C{,XX}FLAGS_FOR_TARGETS
2210 so that -mrelocatable-lib and -mno-eabi are used.
2212 * Makefile.in (CONFIGURE_TARGET_MODULES): If target compiler does
2213 not support --print-multi-lib, don't abort.
2217 * config/mh-cygwin32 (CFLAGS): Define _WIN32 to be compatible
2218 with normal Windows compilation environment.
2222 * make-all.com: Run config-a-gas.
2223 * setup.com: Don't copy subdirectory files around.
2227 * configure.in (*-*-ose): Remove exclusion of libgloss for this
2228 target, it now compiles correctly.
2232 * mpw-config.in: Generate Mac include for elf/dwarf2.h.
2236 * configure.in (d10v-*-*): Remove ld from $noconfigdirs.
2240 * configure.in (native_only): Add prms.
2244 * Makefile.in (GAS_SUPPORT_DIRS): Add make-all.com and setup.com.
2245 (BINUTILS_SUPPORT_DIRS): Likewise.
2249 * configure.in (d10v-*-*): Don't configure ld or gdb until the
2250 d10v support is added.
2254 * configure.in (d10v-*-*): New target.
2258 * config.guess (HP 9000/811): Recognize this as a PA1.1
2263 * Makefile.in (do-tar-gz): New target, split out from tail end of
2264 taz target. Run each command separately, don't use pipes.
2269 * mpw-configure: Look for g-mpw-make.sed in config/mpw.
2270 * mpw-build.in: No builds should depend on building byacc or flex,
2271 they are assumed to be installed already.
2275 * Makefile.in (CONFIGURE_TARGET_MODULES): Set r environment
2276 variable that CC_FOR_TARGET needs.
2280 * Makefile.in (CONFIGURE_TARGET_MODULES): Determine if the multlib
2281 options have changed since the last time the subdirectory was
2282 configured, and if it has, reconfigure.
2283 (CLEAN_TARGET_MODULES): Delete multilib.out and tmpmulti.out, which
2284 CONFIGURE_TARGET_MODULES uses to remember the old multilib options.
2288 * Makefile.in (ALL_MODULES,CROSS_CHECK_MODULES,INSTALL_MODULES,
2289 CLEAN_MODULES): Add bash.
2290 (all-bash): New target.
2294 * configure.in (mips-sgi-irix6*): Use mh-irix6 instead of mh-irix5.
2298 * config.sub (basic_machine): Recognize d10v as a valid processor.
2302 * mpw-configure: Add support for --bindir.
2303 * mpw-build.in: Use a GCC-specific build script for GCC actions.
2307 * configure.in: add bash, time, gawk to list of hosttools and things
2308 to only build for native toolchains
2312 * Makefile.in (docdir): Remove.
2316 * Makefile.in (datadir): Set to $(prefix)/share.
2320 * configure.in: build diff and patch for cygwin32-hosted
2325 * config.sub: Accept -rtems*.
2329 * configure.in: enable dosrel for cygwin32-hosted builds,
2330 remove diff from the list of things not buildable
2335 * Makefile.in (TARGET_SUBDIR): Move comment to previous line so we
2340 * configure.in (mips*-sgi-irix6*): Set noconfigdirs appropriately.
2344 * Makefile.in (taz): Handle case where tex3patch didn't even get
2345 checked out. Also, if it was found, put the symlink in a new util
2350 * config.guess (*:Linux:*:*): Add support for PowerPC Linux.
2354 * config.sub: Recognize -openvms.
2355 * configure.in (alpha*-*-*vms*): Set noconfigdirs.
2356 * make-all.com, setup.com: New files.
2360 * Makefile.in (taz): tex3patch moved to texinfo/util.
2364 * configure.in: remove make from disable-if-Can-Cross list
2365 enable gdb if ${host} and ${target} are cygwin32
2369 * config.guess (i?86-ncr-sysv*): Emit minor release numbers.
2370 Recognize the NCR 4850 machine and NCR Pentium-based platforms.
2374 * config.guess: Combine mips-mips-riscos cases, and use cpp to
2375 distinguish sysv/svr4/bsd variants.
2380 * configure.in: Added copyright notice.
2381 * move-if-change: Added copyright notice.
2385 * configure.in (powerpcle-*-solaris*): Until we get shared
2386 libraries working, don't build gdb, sim, make, tcl, tk, or
2391 * config.guess: Merge with FSF:
2394 * config.guess (*:Linux:*:*): Add guess for sparc-unknown-linux.
2397 * config.guess (AViiON:dgux:*:*): Fix typo in recognizing mc88110.
2400 * config.guess: Combine two OSF1 rules.
2402 * config.guess (dgux): Use /usr/bin/uname rather than uname,
2407 * Makefile.in (MAKEDIRS): Removed $(tooldir).
2411 * mpw-README: Document GCCIncludes.
2415 * configure.in (alpha-*-linux*): Set enable_shared to yes.
2419 * mpw-configure: Handle --enable-FOO and --disable-FOO.
2423 * configure.in (*-*-cygwin32): Configure make.
2427 * Makefile.in (inet-install): Quote value of INSTALL_MODULES.
2431 * Makefile.in (all-inet): Depend on all-perl.
2433 * Makefile.in (inet-install): New target.
2435 * Makefile.in (all-inet): Depend on all-tcl.
2436 (all-inet): Depend on all-send-pr.
2440 * configure.in (powerpcle-*-solaris*): Turn off tk and tcl
2445 * configure.in: Don't configure --with-gnu-ld on AIX.
2449 * configure.in (powerpcle-*-solaris*): Turn off gdb temporarily.
2453 * Makefile.in (ALL_MODULES): Added all-inet.
2454 (CROSS_CHECK_MODULES): Added check-inet.
2455 (INSTALL_MODULES): Added install-inet.
2456 (CLEAN_MODULES): Added clean-inet.
2457 (all-indent): New target.
2459 * configure.in (host_tools): Added inet.
2460 (native_only): Added inet.
2461 (noconfigdirs): Added inet.
2465 * configure.in: Don't configure libgloss if we are not configuring
2470 * configure.in: Don't configure libgloss for unsupported
2475 * Makefile.in (CLEAN_MODULES): Add clean-apache.
2479 * Makefile.in (ALL_MODULES): Include all-apache.
2480 (CROSS_CHECK_MODULES): Include check-apache.
2481 (INSTALL_MODULES): Include install-apache.
2482 (all-apache): New target.
2484 * configure.in: Added apache everywhere perl is seen.
2488 * Makefile.in: Add support for clean-{module} and
2489 clean-target-{module} rules.
2493 * configure.in (*-*-ose) do not build libgloss.
2497 * config.guess (prep*:SunOS:5.*:*): Turn into
2498 powerpele-unknown-solaris2.
2502 * configure.in: Permit --enable-shared to specify a list of
2507 * configure.in (host==solaris): Pass only the first word of $CC
2508 to /usr/bin/which when checking if we're using /usr/ccs/bin/cc.
2512 * Makefile.in (BASE_FLAGS_TO_PASS): pass down $(MAKE).
2516 * Makefile.in (ALL_MODULES): Include all-perl.
2517 (CROSS_CHECK_MODULES): Include check-perl.
2518 (INSTALL_MODULES): Include install-perl.
2519 (ALL_X11_MODULES): Include all-guile.
2520 (CHECK_X11_MODULES): Include check-guile.
2521 (INSTALL_X11_MODULES): Include install-guile.
2522 (all-perl): New target.
2523 (all-guile): New target.
2525 * configure.in (host_tools): Include perl and guile.
2526 (native_only): Include perl and guile.
2527 (noconfigdirs): Don't build guile and perl; no ports have been
2532 * configure (--enable-*): Handle quoted option lists such as
2533 --enable-sim-cflags='-g0 -O' better.
2537 * Makefile.in ({,inst}all-target): New rule so we can make and
2538 install all of the target directories easily.
2542 * configure.in: Add missing global flag in sed substitution when
2543 deleting `target-' from ${configdirs}.
2547 * Makefile.in (DO_X): Don't get confused if CC contains `=' in an
2550 * configure.in (mips*-nec-sysvr4*): Use a host_makefile_frag of
2553 * install.sh: Correct misspelling of transformbasename.
2555 * config.guess: Recognize mips-*-sysv*.
2559 * config.sub: Recognize mon960.
2563 * configure: Restore Canadian Cross handling of BISON and LEX,
2564 removed in Feb 20 change.
2569 Mention make install. Remove the old copyright date as well the
2570 clumsy and rather pointless copyright on the README file.
2574 * Makefile.in ($(CONFIGURE_TARGET_MODULES)): If there is a
2575 Makefile after running symlink-tree, then run `make distclean' to
2576 avoid clobbering any generated files in srcdir.
2580 * configure.in (m68k-*-netbsd*): Build everything now.
2584 * Makefile.in (taz): Fix quoting.
2588 * configure.in (sparclet-*-*): Build everything now.
2592 * configure.in (m68k-*-linux*): New host.
2596 * configure: Check for bison before byacc.
2600 * Makefile.in configure: Change the way LEX and BISON/YACC are
2601 set. configure now defines DEFAULT_LEX and DEFAULT_YACC by
2602 searching PATH. These are used as fallbacks by Makefile.in if
2603 flex/bison/byacc aren't in objdir.
2607 * Makefile.in: Make everything which depends upon all-bfd also
2608 depend upon all-opcodes, in case --with-commonbfdlib is used.
2612 * configure.in (host *-*-cygwin32): Don't build gdb if we are
2613 building NT native compilers on Unix.
2617 * configure.in: Don't get CC from the host Makefile fragment if we
2618 can find gcc in PATH, or if this is a Canadian Cross. Move the
2619 Solaris test for /usr/ucb/cc to the post target script, just after
2620 the compiler sanity test.
2624 * config.sub: Merge with FSF.
2628 * Makefile.in (RPATH_ENVVAR): New variable.
2629 (REALLY_SET_LIB_PATH): Use it.
2630 * configure.in: On HP/UX, set RPATH_ENVVAR to SHLIB_PATH.
2634 * config.sub, configure.in: Recognize sparclet cpu.
2638 * config.guess: Support m68k-cbm-sysv4.
2642 * config.guess (*:Linux:*:*): Guess m68k-unknown-linux and
2643 m68k-unknown-linuxaout from linker help string. Put quotes around
2648 * config.guess (powerpc-harris-powerunix): Add guess for port
2653 * config.guess (UNAME_VERSION): Recognize X4.x as an OSF version.
2657 * configure.in: If --enable-shared was used, set SET_LIB_PATH to
2658 $(REALLY_SET_LIB_PATH) in Makefile.
2659 * Makefile.in (SET_LIB_PATH): New variable.
2660 (REALLY_SET_LIB_PATH): New variable.
2661 ($(DO_X)): Use $(SET_LIB_PATH).
2662 (install.all, gcc-no-fixedincludes, $(ALL_MODULES)): Likewise.
2663 ($(NATIVE_CHECK_MODULES), $(CROSS_CHECK_MODULES)): Likewise.
2664 ($(INSTALL_MODULES), $(CONFIGURE_TARGET_MODULES)): Likewise.
2665 ($(ALL_TARGET_MODULES), $(CHECK_TARGET_MODULES)): Likewise.
2666 ($(INSTALL_TARGET_MODULES), $(ALL_X11_MODULES)): Likewise.
2667 ($(CHECK_X11_MODULES), $(INSTALL_X11_MODULES)): Likewise.
2668 (all-gcc, all-bootstrap, check-gcc, install-gcc): Likewise.
2669 (install-dosrel): Likewise.
2670 (all-opcodes): Depend upon all-libiberty.
2674 * config.guess (*:CYGWIN*): New
2678 * Makefile.in (all-target-winsup): All all-target-libiberty.
2682 * configure.in (noconfigdirs): Add missing # in front of comment.
2686 * configure.in: add second pass to things added to noconfigdirs
2687 so *-gm-magic can exclude libgloss properly.
2691 * mpw-configure (extralibs_name, rez_name): Set correctly
2692 for MWC68K compiler.
2694 * mpw-README: Add more info on the necessary build tools.
2698 * configure.in, config.sub: Recognize cygwin32.
2702 * config.guess, config.sub: Recognize A/UX.
2706 * config.sub: Merge with gcc/config.sub.
2710 * mpw-build.in (do-binutils): Add build of stamps.
2714 * config.sub: Add recognition for mips64vr4100*-* targets.
2718 * test-build.mk: Add checking of `hpux9' rather than just `hpux'.
2719 Add creation of gconfigargs with `--enable-shared' turned on.
2720 ($(host)-stamp-stage2-configured): Pass $(gconfigargs).
2721 ($(host)-stamp-stage3-configured): Likewise.
2722 (HOLES): Add chatr and ldd.
2723 (i386-ncr-sysv4.3*): Add use of /usr/ccs/bin in the PATH and HOLE_DIRS.
2727 * configure: Pass --nfp to recursive configures.
2731 * Makefile.in (DLLTOOL): New.
2732 (DLLTOOL_FOR_TARGET): New.
2733 (EXTRA_HOST_FLAGS): Pass down DLLTOOL.
2734 (EXTRA_TARGET_FLAGS): Ditto.
2735 (EXTRA_GCC_FLAGS): Ditto.
2736 (CONFIGURE_TARGET_MODULES): Ditto.
2738 * configure: Add DLLTOOL.
2743 * configure.in (i[345]86-*-sco3.2v5*): Use mh-sysv instead of
2744 mh-sco, since old workarounds no longer needed, and don't
2745 build ld, since libraries have weak symbols in COFF.
2749 * Makefile.in (CONFIGURE_TARGET_MODULES): Add missing ';'.
2753 * configure.in: Make sure that ${CC} can be used to compile an
2758 * Makefile.in (newlib.tar.gz): Delete building of newlib's info files.
2762 * configure.in (noconfigdirs): Put ld or gas in this early, if the
2763 user specifically used --with-gnu-ld=no or --with-gnu-as=no.
2767 * config-ml.in: Add support for
2768 --disable-{softfloat,m68881,m68000,m68020} on m68*-*-*.
2769 Simplify setting of multidirs from --disable-foo.
2773 * Makefile.in (EXTRA_GCC_FLAGS): If any of the make variables
2774 LANGUAGES, BOOT_CFLAGS, STMP_FIXPROTO, LIMITS_H_TEST,
2775 LIBGCC1_TEST, LIBGCC2_CFLAGS, LIBGCC2_INCLUDES, and ENQUIRE are
2776 non-empty, pass them on to the GCC make.
2777 (all-bootstrap): New rule that is like all-gcc, except it executes
2778 the GCC bootstrap rule instead of the GCC all rule.
2782 * config-ml.in (ml_realsrcdir): New, to account for ${subdir}.
2786 * config.guess (AViiON:dgux:*:*): Update from FSF to add pentium
2791 * config.sub (i*86*) Change [345] to [3456]
2795 * configure.in (noconfigdirs): Add gas or ld if --with-gnu-as=no or
2800 * config-ml.in (rs6000*, powerpc*): Add switches to control which
2801 AIX multilibs get built.
2805 * configure.in (i386-win32): Don't build expect if we're not
2806 building the tcl subdir.
2810 * Makefile.in: (configure-target-examples, all-target-examples):
2811 New targets, configure and build example programs.
2815 * mpw-configure: If an mpw-config.in generated a file mk.sed,
2816 use it as input to sedit the generated MPW makefile.
2817 * mpw-README: Add a suggestion about Gestalt.h.
2821 * config.sub: Accept *-*-ieee*.
2825 * Makefile.in (local-distclean): Remove $(TARGET_SUBDIR). From
2830 * configure.in (host==powerpc-pe): Add many directories to noconfigdirs
2831 for powerpc-pe native.
2832 (target==i386-win32): add tcl, make to noconfigdirs if canadian cross.
2833 (target==powerpc-pe): duplicate i386-win32 entry.
2837 * configure.in (noconfigdirs): Exclude target-newlib for all versions
2838 of vxworks, not just vxworks5.1.
2842 * mpw-configure: Add support for exec-prefix.
2846 * config.guess: Recognize HP model 816 machines as having
2851 * configure: Ignore new autoconf configure options.
2855 * config/mt-v810 (CC_FOR_TARGET): Add -ansi flag. NEC compiler
2856 defaults to K&R mode, but doesn't have varargs.h, so we have to
2857 compile in ANSI mode.
2861 * config.guess: Recognize Pentium under SCO.
2866 * configure.in (noconfigdirs): Disable target-libio on v810-*-*.
2867 * config/mt-v810 (CC_FOR_TARGET, AS_FOR_TARGET, AR_FOR_TARGET,
2868 RANLIB_FOR_TARGET): Set as appropriate for NEC v810 toolchain.
2872 * configure.in: Don't configure gas for alpha-dec-osf*.
2876 * configure.in: Default to --with-stabs for some targets for which
2877 it makes sense: mips*-*-*, alpha*-*-osf*, i[345]86*-*-sysv4* and
2878 i[345]86*-*-unixware*.
2882 * config-ml.in: Get list of multidirs using gcc --print-multi-lib
2883 rather than basing it on the target. Simplify handling of options
2884 controlling which directories to configure. Remove extraneous
2885 slash in multi-clean target.
2889 * config-ml.in: Prefix more variables with ml_ so they don't collide
2894 * configure: Don't turn -v into --v.
2898 * configure.in (targargs): Fix typo.
2900 * Makefile.in (DEVO_SUPPORT): Add symlink-tree.
2904 * configure.in: Strip --host and --target options from
2905 CONFIG_ARGUMENTS, and always configure for --host only. Add
2906 --with-cross-host option when building with a cross-compiler.
2907 * configure: Canonicalize the arguments put into config.status by
2908 always using `=' for an option with an argument. Pass a presumed
2909 --host or --target explicitly.
2913 * config.sub: Merge -macos*, -magic*, -pe*, and -win32 cases
2914 into general OS recognition case.
2918 * configure.in (target_configdirs): add target-winsup only
2919 for win32 target systems.
2923 * Makefile.in (all-target-libgloss): Depend upon
2924 configure-target-newlib, since when libgloss is built it looks to
2925 see if the newlib directory exists.
2929 * Makefile.in (DEVO_SUPPORT): Use config-ml.in instead of
2934 * configure: Handle LD and LD_FOR_TARGET when configuring a
2939 * config/mh-i386win32: add LD_FOR_TARGET.
2943 * configure.in (target_libs): add target-winsup.
2944 (target==i386-win32): add patch diff flex make to $noconfigdirs.
2945 (target==ppcle-pe): remove ld from $noconfigdirs.
2949 * Makefile.in (CONFIGURE_TARGET_MODULES): Pass --with-target-subdir.
2950 Preserve relative path names in $srcdir. Build symlink tree if
2951 configuring cross target dir and srcdir=. (= no VPATH support).
2952 (configure-target-libg++): Depend on configure-target-librx.
2953 * cfg-ml-com.in, cfg-ml-pos.in: Deleted.
2954 * config-ml.in: New file.
2955 * symlink-tree: New file.
2956 * configure: Ensure srcdir="." if that's what it is.
2960 * mpw-README: Clarify some phrasing, add notes about CodeWarrior
2961 includes and FLEX_SKELETON setting.
2962 * mpw-configure (--with-gnu-ld): New option, controls whether
2963 to use PPCLink or ld with PowerMac GCC.
2964 * mpw-build.in (all-grez, do-grez, install-grez): New targets.
2965 * mpw-config.in: Configure grez if targeting Mac.
2967 * config.sub: Accept pmac and pmac-mpw as names for PowerMacs,
2968 accept mpw and mac-mpw as names for m68k Macs, change macos7 to
2970 * configure.in: Configure grez resource compiler if targeting Mac.
2971 * Makefile.in (all-grez, install-grez): New targets.
2975 * configure: CXX defaults to gcc, not g++. If we find
2976 gcc in the path, set CC to gcc -O2.
2980 * configure: Default ${build} correctly. Avoid picking up extra
2981 spaces when reading CC and CXX from Makefile. When doing a
2982 Canadian Cross, use plausible default values for numerous
2984 * configure.in: When doing a Canadian Cross, don't try to
2985 configure tools whose configure script can't handle it.
2989 * cfg-ml-com.in (sh-*-*): Add m2 and ml/m2 to multidirs.
2993 * configure: Remove dubious bug reporting address.
2997 * Makefile.in ($(CONFIGURE_TARGET_MODULES)): If subdir has
2998 configure script, run that instead of this directory's configure.
2999 In either case, print a message that we're configuring the sub-dir.
3003 * configure.in: Before checking for the existence of various files,
3004 use sed to filter out "target-".
3008 * Makefile.in (DO_X): Split rule to decrease command line length
3010 (Philippe De Muyter).
3014 * Makefile.in (all-patch): depend on all-libiberty.
3018 * configure.in: If the only directory in target_configdirs which
3019 actually exists is libiberty, then set target_configdirs to empty,
3020 to avoid trying to build a target libiberty in a gas or gdb
3025 * configure.in (host_makefile_frag): Use m68k-sun-sunos* instead
3026 of m68k-sun-* when selecting mh-sun3 to avoid matching NetBSD/sun3
3031 * configure.in (copy_dirs): Use sys-include instead of include
3032 for --with-headers option.
3036 * Makefile.in, configure.in: Make winsup builds work with
3041 * configure.in: Build the linker on AIX.
3045 * Makefile.in (CC_FOR_TARGET, CXX_FOR_TARGET): Add $(TARGET_SUBDIR)
3050 * Makefile.in (all-gcc): Fix typo.
3054 * Makefile.in ($(CHECK_TARGET_MODULES)): Fix typo.
3058 * configure.in: Rename libFOO to target-libFOO, and xiberty
3059 to target-xiberty, to provide more flexibility.
3060 (target_subdir): Define. Create if cross.
3061 Set TARGET_SUBDIR in Makefile to ${target_subdir}.
3062 * Makefile.in: Rename all-libFOO -> all-target-libFOO, all-xiberty
3063 -> all-target-libiberty, configure-libFOO -> configure-target-libFOO,
3064 check-libFOO -> check-target-libFOO, etc.
3065 ($(DO_X)): Iterate over TARGET_CONFIGDIRS after SUBDIRS.
3066 ($(CONFIGURE_TARGET_MODULES), $(CHECK_TARGET_MODULES),
3067 $(ALL_TARGET_MODULES), $(INSTALL_TARGET_MODULES)): Update accordingly.
3068 (configure-target-XXX): Depend on $(ALL_GCC), not all-gcc, to
3069 allow ALL_GCC="" to only configure.
3070 (DEVO_SUPPORT): Add cfg-ml-com.in and cfg-ml-pos.in.
3071 (ETC_SUPPORT, ETC_SUPPORT_PFX): Merge; update 'taz' accordingly.
3072 (LIBGXX_SUPPORT_DIRS): Remove xiberty.
3076 * Makefile.in (taz): Build "info" in etc explicitly.
3080 * configure.in: Make sure that CC is undefined (as opposed to
3081 null) if toplevel/config/mh-{host} doesn't define it. Fixes a
3082 problem with autoconf trying to configure on a host without GCC.
3086 * mpw-configure: Set host alias from choice of host compiler,
3087 only use generic MPW Makefile sed if present, edit a file
3088 named "hacked_Makefile.in" instead of "Makefile.in" if present.
3089 * mpw-README: Add problem notes about CW6 and CW7.
3093 * Makefile.in (taz): Use ";" instead of ";;".
3097 * Makefile.in (taz): Grep for '^diststuff:' or '^info:' in
3098 sub-directory Makefiles, instead of using DISTSTUFFDIRS and
3100 (DISTSTUFFDIRS, DISTDOCDIRS): Removed - no longer used.
3101 (newlib.tar.gz): Don't pass DISTDOCDIRS to recursive make.
3105 * Makefile.in (DISTDOCDIRS): Remove ld gprof bnutils gas libg++ gdb
3106 and gnats, because they are now subsumed by DISTSTUFFDIRS.
3107 Move bfd to DISTSTUFFDIRS.
3111 * Makefile.in (X11_LIB): Removed.
3112 (X11_FLAGS_TO_PASS): pass only X11_EXTRA_CFLAGS and X11_EXTRA_LIBS.
3114 * configure.in (host_makefile_frag): mh-aix & mh-sun removed.
3118 * cfg-ml-com.in (powerpc*): Shorten some of the multilib directory
3123 * cfg-ml-com.in (powerpc*-eabi*): Add mcall-aixdesc varients.
3127 * configure.in (i[345]86-*-win32): Always build newlib.
3128 Don't configure cvs, autoconf or texinfo.
3129 * Makefile.in (LD_FOR_TARGET): New.
3130 (BASE_FLAGS_TO_PASS, EXTRA_TARGET_FLAGS, CONFIGURE_TARGET_MODULES):
3131 Pass down LD_FOR_TARGET.
3135 * winsup: New directory.
3136 * Makefile.in: Build winsup.
3137 * configure.in: Winsup is configured when target is win32.
3138 Can only build win32 target GDB when native.
3142 * config.guess: Recognize HP model 819 machines as having
3147 * configure: Fix sed loop which substitutes for CC and CXX to
3148 avoid bug found in various sed implementations.
3152 * cfg-ml-com.in (powerpc-*-eabisim): Delete separate rule for
3153 simulator. Use standard powerpc-*-eabi*.
3157 * configure.in: Stop putting gas and binutils in noconfigdirs for
3158 powerpc-*-aix* and rs6000-*-*.
3162 * cfg-ml-com.in (powerpc*-*-eabisim*): Add support for building
3163 -mcall-aixdesc libraries.
3169 * config.sub (arm | armel | armeb): Fix shell syntax.
3173 * cfg-ml-com.in ({powerpc,rs6000}-ibm-aix*): Add multilibs for
3174 -msoft-float and -mcpu=common support.
3175 (powerpc*-*-eabisim*): Add support for building -mcall-aix
3180 * configure.in: Allow configuration and build of emacs19 for the alpha.
3184 * configure.in (CC): Get ^CC, not just any old CC, from
3185 ${host_makefile_frag}.
3189 * configure.in (CC): Try to get CC from
3190 ${srcdir}/${host_makefile_frag}, not ${host_makefile_frag}.
3194 * Makefile.in (TARGET_CONFIGDIRS): configure targetdirs
3195 only if it exists in $(srcdir).
3199 * configure: If CC and CXX are not set in the environment, set
3200 them, based on either an existing Makefile or on searching for gcc
3201 in PATH. Substitute for CC and CXX in Makefile.
3202 * configure.in: Remove libm from target_libs. Separate
3203 target_configdirs from configdirs. If CC is not set in
3204 environment, try to get it from a host Makefile fragment. Rewrite
3205 changes of configdirs to use skipdirs instead. A few minor
3206 tweaks. Take directories out of target_configdirs as they are
3207 taken out of configdirs. Remove existing Makefile files from
3208 subdirectories. Substitute for TARGET_CONFIGDIRS and
3209 CONFIG_ARGUMENTS in Makefile.
3210 * Makefile.in (TARGET_CONFIGDIRS): New variable, automatically set
3212 (CONFIG_ARGUMENTS): Likewise.
3213 (CONFIGURE_TARGET_MODULES): New variable.
3214 ($(DO_X)): Loop over TARGET_CONFIGDIRS as well as SUBDIRS.
3215 ($(CONFIGURE_TARGET_MODULES)): New target.
3216 (configure-libg++, configure-libio): New targets.
3217 (all-libg++): Depend upon configure-libg++.
3218 (all-libio): Depend upon configure-libio.
3219 (configure-libgloss, all-libgloss): New targets.
3220 (configure-libstdc++): New target.
3221 (all-libstdc++): Depend upon configure-libstdc++.
3222 (configure-librx, all-librx): New targets.
3223 (configure-newlib): New target.
3224 (all-newlib): Depend upon configure-newlib
3225 (configure-xiberty): New target.
3226 (all-xiberty): Depend upon configure-xiberty.
3230 * configure.in (host i[345]86-*-win32): Expand the
3235 * mpw-configure: Fix sed command file name.
3239 * configure.in (host i[345]86-*-win32): Reduce the
3244 * configure.in: Don't configure ld and gdb for powerpc*-*-winnt*
3245 or powerpc*-*-pe*, since they are not yet supported.
3249 Add PowerMac support and many other enhancements.
3250 * mpw-configure: New option --cc to select compiler to use,
3251 paste options set according to --cc into the generated
3252 Makefile, generate the Makefile by sed'ing the Unix Makefile.in
3253 if mpw-make.sed is present.
3254 * mpw-config.in: Don't test for gC1, test for mpw-touch,
3255 add forward includes for PowerPC include files.
3256 * mpw-build.in: Build using Makefile.PPC if present.
3257 (do-byacc, etc): Remove separate version resource builds.
3258 (do-gas): Build "stamps" before "all".
3259 (do-gcc): Build "stamps-h" and "stamps-c" before "all".
3260 * mpw-README: Update to reflect --cc option, PowerMac support,
3261 and recently-reported compatibility problems.
3265 * cfg-ml-com.in (m68*-*-*): Only build multilibs for
3266 embedded m68k systems (-aout, -coff, -elf, -vxworks).
3267 (--with-multilib-top): Pass to recursive invocations.
3271 * configure.in (noconfigdirs): Disable libg++ and libstdc++ on
3276 * configure.in (noconfigdirs): Disable bfd, binutils, gas, gcc,
3277 gdb, ld and opcodes on v810-*-*.
3281 * config/mh-ncrsvr43: Removed AR_FLAGS
3285 * Makefile.in (DO_X): Change do-realclean to do-maintainer-clean.
3286 (local-maintainer-clean): New target.
3287 (maintainer-clean): New target.
3288 (realclean): Just depend upon maintainer-clean.
3292 * configure.in (noconfigdirs): Disable gdb on m68k-*-netbsd*.
3296 * configure.in: Build ld in mips*-*-bsd* case.
3300 * config.sub: Accept -lites* OS. From Ian Dall.
3304 * config.sub: recognise mips64vr4300 and mips64vr4300el as valid
3309 * configure.in: treat i386-win32 canadian cross the same as
3310 i386-go32 canadian cross.
3314 * cfg-ml-com.in (powerpc*-*-eabisim): Add support for PowerPC
3315 running under the simulator to build a reduced set of libraries.
3316 (powerpc-*-eabiaix): Add fine grained multilib support added to
3317 other powerpc targets yesterday.
3321 * cfg-ml-com.in (powerpc*): Add support for -disable-biendian,
3322 -disable-softfloat, -disable-relocatable, -disable-aix, and
3323 -disable-sysv to control which multilib libraries get built.
3327 * configure: Add Makefile.tem to list of files to remove in trap
3332 * config.guess (*Linux*): Add missing "exit"s.
3333 Also, need specific check for alpha-unknown-linux (uses COFF).
3337 * config.guess: Merge with FSF:
3340 * config.guess (AIX4): More robust release numbering discovery.
3343 * config.guess (i386-sequent-ptx): Properly get version number.
3346 * config.guess (mips:*:4*:UMIPS): New case.
3350 * configure.in (i386-go32 host): Fix typo (deja-gnu -> dejagnu).
3351 (i386-win32 host): Likewise. Don't build readline.
3355 * Makefile.in (GDB_SUPPORT_DIRS): Add utils.
3356 (DEVO_SUPPORT): Add mpw-README, mpw-build.in, mpw-config.h and
3361 * configure.in (appdirs): Use =, not ==, in test expression when
3362 trying to build the text to print in the warning message for
3367 * cfg-ml-com.in (z8k-*-coff): Add 'std' multilib build.
3371 * config.guess: Recognize lynx-2.3.
3375 * config.sub (z8ksim): Deleted
3376 (z8k-*-coff): New, this is the one true name of the target.
3380 * cfg-ml-pos.in (dotdot): Work around SunOS sed bug.
3384 * config.guess (*:Linux:*:*): First try asking the linker what the
3385 default object file format is (elf, aout, or coff). Then if this
3386 fails, try previous methods.
3390 * configure.in: Don't build newlib for *-*-vxworks5.1.
3394 * configure.in: Don't build newlib for a29k-*-vxworks5.1.
3395 * test-build.mk: Add setting of --with-headers for a29k-vxworks5.1.
3399 * cfg-ml-pos.in (MULTITOP): Trim excess trailing "/.".
3403 * cfg-ml-com.in: New file.
3404 * cfg-ml-pos.in: New file.
3408 * COPYING.NEWLIB: Add HP free copyright to list.
3412 * config.sub: Recognize -eabi* for the system, not just -eabi.
3416 * Makfile.in (DLLTOOL_FOR_TARGET): New name, pass it down.
3417 * config.sub, configure.in (win32): New target and host.
3421 * configure.in: Add i386-pe configuration.
3425 * mpw-build.in (install): Install GDB after LD.
3429 * mpw-config.in (elf/mips.h): Always forward-include, needed
3434 * testsuite: New directory for customer acceptance and whole tool
3439 * configure: If per-host line isn't found, but AC_OUTPUT is found
3440 and a configure script exists, run it instead.
3444 * config.guess: Update from FSF, for alpha-dec-winnt3.5 and Crays.
3448 * configure: Set build_{cpu,vendor,os,alias} to host values when
3449 --build isn't specified.
3453 * Makefile.in (PICFLAG, PICFLAG_FOR_TARGET): New macros.
3454 (FLAGS_TO_PASS): Pass them.
3455 (EXTRA_TARGET_FLAGS): Ditto.
3457 * config/m?-*pic: Define PICFLAG* instead of LIB*FLAGS*.
3461 * Makefile.in (all-libg++): Depend on all-libstdc++.
3465 * configure.in (noconfigdirs): Enable all packages for
3466 i386-unknown-netbsd.
3470 * configure.in (noconfigdirs): Don't configure tk for i386-go32
3471 hosted builds (DOS builds)
3475 Changes for ARM based on patches from Richard Earnshaw:
3476 * config.sub: Handle armeb and armel.
3477 * configure.in: Omit arm linker only for riscix.
3481 * config.guess: Update from FSF.
3485 * config.sub: Recognize powerpcle as the little endian varient of
3486 the PowerPC. Recgonize ppc as a PowerPC variant, and ppcle as a
3487 powerpcle variant. Convert pentium into i586, not i486. Add p5
3488 alias for i586. Map new x86 variants p6, k5, nexgen into i586
3493 * configure.in (hppa*-*-lites*): Treat like hppa*-*-*elf*.
3497 * config.sub: Accept -lites* as a basic system type.
3501 * config.guess (*:Linux:*:*): Check for whether the pre-BFD linker is
3502 installed, and if so return linuxoldld as the system name.
3506 * config.guess: Add hppa1.1-hp-lites support.
3510 * configure.in: Don't build newlib for m68k-vxworks5.1.
3514 * configure.in (mips-sgi-irix6): Use mh-irix5.
3518 * Makefile.in (all-gcc): Depend on all-ld (for libgcc1-test).
3522 * test-build.mk: Enable building of shared libraries on IRIX 5 and
3523 OSF/1. Fix compiler flags.
3524 * build-all.mk: Support Linux and OSF/1 3.0. Fix compiler flags.
3528 * configure.in: Recognize --with-newlib.
3529 (sparc-*-sunos4*): Build sim, dejagnu, expect, tcl if cross target.
3533 Merge in support for Mac MPW as a host.
3534 (Old change descriptions retained for informational value.)
3536 * mpw-config.in: Add generic include forwards for cpu-specific
3537 include files in aout and elf directories.
3539 * mpw-configure: Added copyright.
3540 * mpw-config.in: Check for presence of required build tools.
3541 (target_libs): Add newlib.
3542 (target_tools): Add examples.
3543 (Read Me): Generate as "Read Me for MPW" instead.
3544 * mpw-build.in: Base sub-builds on all-foo instead of do-foo.
3545 (all-byacc, do-byacc, all-flex, do-flex, do-newlib): New actions.
3546 (do-gas, do-gcc, do-gdb, do-ld): Build Version.r first.
3548 * mpw-configure: Remove subdir-specific makefile hackery,
3549 delete mk.tmp after using it.
3551 * mpw-build.in (all): Display start and end times.
3553 * mpw-configure (host_canonical): Set.
3554 (target_cpu): Always add to makefiles.
3555 (ARCHDEFS, EMUL): Add to makefile only if nonempty.
3556 (TM_FILE, XM_FILE, NM_FILE): No longer add to makefile.
3557 (mpw-mh-mpw): Look for in srcdir and srcroot.
3558 Use sed instead of mpw-edit-prefix to edit prefix definitions.
3560 * mpw-build.in: (install-only): New target.
3562 * mpw-configure (host_alias, target_alias): Rename from hostalias
3563 and targetalias, add into generated Makefile.
3564 (mk.tmp): If present, add into generated Makefile.
3565 * mpw-build.in (all-gas): Build config.h first before gas proper.
3567 * mpw-configure (config.status): Write only if changed.
3568 * mpw-config.in (readline): Configure it (not built, just used for
3571 * mpw-config.in (elf/mips.h): Add a forward include.
3573 * mpw-config.in: Forward-include most .h files in include into
3575 (readline): Don't build.
3576 mpw-build.in (install): Install GDB.
3578 * mpw-configure (prefix, mpw_prefix): Handle it.
3579 * mpw-config.in (mmalloc, readline): Don't configure.
3580 * mpw-build.in (thisscript): Rename to ThisScript.
3581 Use mpw-build instead of BuildProgram everywhere.
3582 (mmalloc, readline): Don't build.
3583 * mpw-README: New file, basic documentation about the MPW port.
3585 * mpw-config.in: Use forward-include to create include files.
3587 * mpw-configure: Add more things to the top of each configured
3588 Makefile, including contents of config/mpw-mh-mpw.
3589 * mpw-config.in (extra-include): Create this directory and fill it
3590 with Posix-like include files when configuring.
3592 * config.sub (apple, mac, mpw): Add various aliases.
3594 * mpw-build.in: New file, top-level build script fragment for MPW.
3595 * mpw-configure: New file, configure script for MPW.
3596 * mpw-config.in: New file, config fragment for MPW.
3600 * configure.in (host_libs): Remove glob, since it is gone from the
3605 * Makefile.in: define empty GDB_NLM_DEPS var.
3607 * configure.in(target_makefile_frag): use config/mt-netware
3608 for netware targets.
3612 * config.sub: Merge in recent FSF changes. Remove linux special
3617 build-all.mk,config/mh-solaris: revert these two changes:
3621 * build-all.mk: Use CC=cc -Xs on Solaris.
3623 Mon Mar 29 19:59:26 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3625 * config/mh-solaris: SunPRO C needs -Xs to be able to get a
3626 working xmakefile for Emacs.
3630 * glob/*: Removed. Schauer's 24 Feb 1994 readline change made us
3632 * Makefile.in: Nuke all references to glob subdirectory.
3636 * configure.in: Fix --enable-shared logic in per-host.
3640 * configure.in (*-hp-hpux[78]*): Use mh-hpux8.
3644 * configure.in (noconfigdirs): Don't build gas on AIX, for
3645 powerpc*-*-aix* as well as for rs6000*-*-aix*.
3649 * configure: Fix --cache-file to work if the file argument is a
3654 * configure: If the --cache-file is used, pass it down to
3655 configure in subdirectories.
3659 * config.sub: add vxworks29k configuration.
3663 * Makefile.in (taz): Do "diststuff" part quietly.
3667 * config.sub: Mini-merge with gcc/config.sub.
3671 * config.guess (IRIX): Sed - to _.
3675 * Makefile.in (source-vault, binary-vault): New targets.
3679 * config.sub: Recognize -eabi as a basic system type.
3683 * configure.in (enable_shared stuff): Fix typo.
3687 * Makefile.in (BASE_FLAGS_TO_PASS): Fix typo in passing LIBCXXFLAGS*.
3691 * Makefile.in (LIBCXXFLAGS_FOR_TARGET): Add -fno-implicit-templates.
3695 * configure.in (rs6000-*-*): Don't build gas.
3699 * Makefile.in: Use /x/x/ instead of /brokensed/brokensed/, to
3700 reduce command line length.
3701 (AS_FOR_TARGET): Check for as.new, not Makefile.
3702 (NM_FOR_TARGET): Check for nm.new, not Makefile.
3706 * config.guess: Merge from FSF.
3710 * configure: Don't use $ when handling program_suffix.
3714 * configure.in: Configure tk for hppa/hpux.
3718 * Makefile.in (LIBGXX_SUPPORT_DIRS): Add libstdc++.
3722 * Makefile.in: Move -fno-implicit-template from CXXFLAGS
3723 to LIBCXXFLAGS. Tests are better run without it.
3727 * Makefile.in (all-ispell): Depend on all-emacs19 instead of all-emacs.
3731 * configure.in (*-*-netware*): Don't configure xiberty.
3735 * configure.in: Remove tk from native_only list.
3739 * build-all.mk: Add mips-ncd-elf target to sun4 targets
3740 for special NCD build.
3744 * Makefile.in (DEVO_SUPPORT): Remove configure.bat and
3745 makeall.bat, they're only useful for binutils snapshots.
3746 (binutils.tar.gz, gas+binutils.tar.gz): Add configure.bat and
3747 makeall.bat to specified SUPPORT_FILES.
3751 * build-all.mk: Add Ericsson targets to sun4 and solaris
3752 hosts. Add BNR's sun4 target to solaris host, so their
3753 build-from-source will be tested in-house first.
3757 * Makefile.in (LIBCFLAGS): New variable.
3758 (CFLAGS_FOR_TARGET): Ditto.
3759 (LIBCFLAGS_FOR_TARGET): Ditto.
3760 (LIBCXXFLAGS): Ditto.
3761 (CXXFLAGS_FOR_TARGET): Ditto.
3762 (LIBCXXFLAGS_FOR_TARGET): Ditto.
3763 (BASE_FLAGS_TO_PASS): Pass them.
3764 (EXTRA_TARGET_FLAGS): Ditto.
3766 * configure.in, config/m[th]-*pic: Support --enable-shared.
3770 * configure.in (target_libs): Include libstdc++ again.
3771 * config.guess: Update from FSF (for FreeBSD).
3775 * Makefile.in (DEVO_SUPPORT): Include configure.bat and
3777 (DISTDOCDIRS): Add `etc'.
3778 (ETC_SUPPORT_PFX): New variable.
3779 (taz): Include anything from etc starting with a word in
3784 * config.sub: Update for recent FSF changes. Remove obsolete
3785 h8300hds entry. Add -windows* and -osx as basic os. Minor
3790 * configure.in (target_libs): Remove libstdc++ for libg++-2.6.1.
3792 * config.guess: Merge with FSF.
3793 * configure.in: Match on i?86-ncr-sysv4.3, not i?86-ncr-sysv43.
3797 * configure: Since the "trap 0" handler will override the exit
3798 status on many systems, only use it for "exit 1", and make it set
3799 a non-zero exit status; reset it before "exit 0". Also, check
3800 exit status of config.sub, and error out if it failed.
3804 * Makefile.in: (ALL_TARGET_MODULES,INSTALL_TARGET_MODULES) Build
3805 and install libgloss.
3809 * Makefile.in (all-binutils): Depend upon all-byacc.
3811 * configure.in: Don't build emacs on Irix 5.
3815 * configure.in (*-*-netware*): Add libio.
3819 * Makefile.in (ALL_TARGET_MODULES): Add libstdc++.
3820 (CHECK_TARGET_MODULES): Ditto.
3821 (INSTALL_TARGET_MODULES): Ditto.
3822 (TARGET_LIBS): Ditto.
3823 (all-libstdc++): Note dependencies.
3827 * Makefile.in (BINUTILS_SUPPORT_DIRS): Add gas.
3831 * Makefile.in (CXXFLAGS): Use -fno-implicit-templates instead of
3832 -fexternal-templates.
3834 * configure.in (target_libs): Add libstdc++.
3835 (noconfigdirs): Add libstdc++ as appropriate.
3839 * config.guess: Update from FSF.
3843 * configure: Use ${config_shell} when running ${configsub}.
3847 * config.sub: No longer recognize h8300h.
3851 * config.sub: Remove extraneous differences between config.sub and
3856 * Makefile.in (DISTSTUFFDIRS): Add gas.
3860 * COPYING.NEWLIB: New file.
3864 * config.guess (HP-UX): Patch from Harlan Stenn
3869 * config.guess (sun4*:SunOS:*:*): Change '-JL' to '_JL'.
3873 * config.sub: Merge nextstep cleanup from FSF.
3877 * configure.in (arm-*-*): Don't configure ld for this target.
3881 * configure.in (*-*-netware): don't configure libg++, libio,
3886 * configure.in (alpha-dec-osf*): Use osf*, not osf1*. Don't
3887 configure ld--it works, but it doesn't support shared libraries.
3891 * config.guess (*-unknown-freebsd*): Get rid of possible
3892 trailing "(Release)" in version string.
3897 * config.guess: Fix i486-ncr-sysv43 -> i486-ncr-sysv4.3.
3898 Fix type: *-next-neststep -> *-next-nextstep.
3900 * config.guess: Merge from FSF:
3904 * config.guess: Recognize powerpc-ibm-aix3.2.5.
3908 * config.guess: Recognize UnixWare 1.1 (UNAME_SYSTEM is SYSTEM_V
3909 instead of UNIX_SV for UnixWare 1.0).
3913 * Makefile.in (all-gdb): Add dependencies on all-gcc and all-ld
3914 to make gdb/nlm/* build after the compiler and linker.
3918 * config.guess (netbsd, freebsd, linux): Accept any machine,
3920 (m68k-atari-sysv4): Relocate to match FSF version.
3922 * config.guess: More merges from the FSF:
3924 Add a space before function call or macro invocation.
3928 * config.guess: Add trap cmd to remove dummy.c and dummy when
3933 * config.guess (dummy.c): Redirect stderr for `hostinfo' command.
3934 (dummy): Redirect stderr from compilation of dummy.c.
3938 * config.guess: Distinguish between NeXTStep 2.1 and 3.x.
3942 * configure: Accept and ignore --cache*, for compatibility with
3947 * config.guess: Merge from FSF:
3951 * config.guess (Pyramid*:OSx*:*:*): New case.
3952 (PATH): Add /.attbin at end for finding uname.
3953 (dummy.c): Handle i860-alliant-bsd. Follow whitespace conventions.
3957 * config.guess (M88*:DolphinOS:*:*): New case.
3961 * config.guess (AViiON:dgux:*:*): Use TARGET_BINARY_INTERFACE
3962 to select whether to use ELF or COFF.
3966 * config.guess: Recognize i860-stardent-sysv and i860-unknown-sysv.
3970 * config.guess: Guess the OS version for HPUX.
3974 * config.guess (UNAME_VERSION): Recognize aix3.2.4 and aix3.2.5.
3978 * configure.in: Recognize --with-headers, --with-libs, and
3980 * Makefile.in (all-xiberty): Depend upon all-ld.
3984 * configure.in: Change i[34]86 to i[345]86.
3988 * configure (version): A few more tweaks to help message.
3992 * Makefile.in: Remove (for now) librx as a host library,
3993 now that we're building it for target.
4002 * configure.in: Also configure librx.
4006 * Makefile.in: Update various rules to reflect that librx
4007 is now needed for libg++.
4011 * config.sub: Accept mips64orion and mips64orionel as a CPU name.
4015 * configure.in: Configure the examples directory.
4019 * configure: Simplify Jun 2 1994 change.
4023 * change CC to /usr/latest/bin/gcc for lynx host builds, since
4024 /bin/gcc isn't good enough to build gcc.
4028 * Makefile.in (GDB_SUPPORT_FILES): Remove
4029 (setup-dirs-gdb, gdb.tar.gz, make-gdb.tar.gz): Remove old rules.
4030 (gdb.tar.gz): Add new rule to use standard distribution building
4035 * configure.in: Warn about use of /usr/ucb/cc on Solaris. From
4044 * configure: Search current dir first in .gdbinit.
4048 * config.sub: Recognize freebsd (merged from gcc config.sub).
4052 * config.sub: Refer to NeXT's operating system as nextstep.
4054 * config.sub (case $basic_machine): Re-order the cases, to match
4055 the order in the FSF version (which is mostly alphabethical).
4056 Merge in some additions and changes from the FSF.
4060 * config.guess: Recognize m68k-atari-sysv4 and m88k-harris-csux7.
4061 * config.sub: Recognize cxux7.
4062 * configure.in: Use mh-cxux for m88k-harris-cxux*.
4066 * config.sub: Fix typo powerpc -> powerpc-*.
4070 * Makefile.in: `all-emacs19' depends on `all-byacc'.
4072 * Makefile.in: Add all-emacs19 and install-emacs19 rules (in
4073 parallel with all-emacs and install-emacs). Top-level command
4074 `make all-emacs19 CC=gcc' now behaves as `make all-emacs CC=gcc'.
4078 * test-build.mk ($(host)-stamp-stage2-installed): Remove
4079 $(relbindir)/make before doing ``make install'', and use
4080 $(GNU_MAKE) while doing it. Avoids problem on SunOS with
4081 installing over running make binary.
4082 ($(host)-stamp-stage3-installed): Likewise.
4086 * config.guess: Recognize Mach.
4090 * configure: Check ${exec_prefixoption}, not ${exec_prefix}, to
4091 see whether --exec-prefix was used.
4095 * README: Explicitly mention libg++/README. (Zoo's idea.)
4099 * Makefile.in: Add all-librx target similar to all-libproc.
4103 * config.guess: Rearrange tests for Alpha-OSF1 to properly deal
4104 with post 1.2 uname bogosity.
4108 * configure: Remove temporary files on receipt of a signal.
4112 * configure: If there is a package_makefile_frag, remove
4113 ${subdir}/Makefile.tem after copying it in.
4117 * build_all.mk: support rs6000 lynx identifies itself as
4118 rs6000-lynx-lynxos2.2.2. Also, use /usr/cygnus/progressive/bin/gcc
4119 since /bin/gcc is too feeble to compile a modern gcc.
4123 * brought devo/test-build.mk update-to-date with progressive/
4124 test-build.mk. Add lynx targets and hppa flag info.
4128 * configure.in: Use mh-ncrsvr43. Patch from
4133 * config.guess (i386-unknown-bsdi): No longer need to
4134 check #if defined(__bsdi__) && defined(__i386__).
4138 * configure: Set program_transform_nameoption correctly.
4142 * brought build-all.mk update-to-date with progressive build-all.mk,
4143 added new targets and hppa info.
4147 * configure: If config.guess result is a prefix of the user
4148 specified target, assume a native build and use the user specified
4149 target as the host alias. Remove SunOS patch suffix removal hack.
4150 * configure.in: Remove SunOS patch suffix removal hack.
4152 * Makefile.in (CROSS_CHECK_MODULES): Remove check-flex, since it's
4153 in NATIVE_CHECK_MODULES.
4157 * Makefile.in: Rename HOST_ONLY to NATIVE.
4158 * configure: Delete SunOs patch suffix from host_canonical
4159 and build_canonical variables that are prepended to Makefiles.
4160 * configure.in: Add comments for easier maintenance.
4164 * Makefile.in: Add all-libproc target similar to all-gui.
4168 * Makefile.in (CHECK_MODULES): split into
4169 HOST_ONLY_CHECK_MODULES and CROSS_CHECK_MODULES.
4173 * config.guess (i386-unknown-bsdi): New system to guess.
4177 * Makefile.in: Add all-gui target (but not yet build by "all").
4181 * config.sub: Move deletion of patch suffix from here...
4182 * configure.in: To here, at Ian's suggestion. The top-
4183 level scripts might need to know of a patch level.
4187 * config.sub: Strip off patch suffix so rtl is recognized
4188 as a sunos4.1.3 machine, even though it's been patched.
4192 * Makefile.in (INSTALL_LAST): Delete.
4193 (INSTALL_DOSREL): New.
4197 * configure.in: Use ld for i[34]86-*-sysv4* and sparc-*-solaris2*.
4198 Don't set use_gnu_ld to no for *-*-sysv4; that only controls
4199 whether we pass down --with-gnu-ld anyhow.
4203 * Makefile.in (INSTALL_LAST): Change operation so it works
4204 on more flavors of make.
4205 * configure.in (go32): Don't build libg++ or libio.
4209 * Makefile.in (Move HOST_PREFIX_1 and friends up so
4210 they can be overriden by templates.
4214 * configure.in (target==go32): Don't build gdb.
4215 * dosrel: New directory.
4219 * configure.in (host==go32): Configure dosrel too.
4220 * Makefile.in (INTALL_TARGET): Call INSTALL_LAST last.
4221 (HOST_CC, HOST_PREFIX, HOST_PREFIX_1): Undefine, they should
4222 be set by incoming names or templates.
4223 (INSTALL_LAST): New rule.
4224 * config/mh-go32: New fragment.
4228 * config.sub (sparclitefrw, sparclitefrwcompat): Don't set the os.
4232 * config/mh-lynxrs6k: Renamed from mh-lynxosrs6k, to make it
4233 unique in 8.3 naming schemes.
4234 * configure.in (appdirs): New variable. Currently empty, but will
4235 be used in gas distribution. If nonempty, lists a set of
4236 directories at least one of which must get configured, or top
4237 level configuration is considered to have failed.
4238 (rs6000-*-lynxos*): Use new file name.
4242 Eliminate XTRAFLAGS.
4243 * Makefile.in (CC_FOR_TARGET): If newlib exists, refer to the
4244 newlib include files using -idirafter, and also use -nostdinc.
4245 (CXX_FOR_TARGET): Likewise.
4246 (XTRAFLAGS): Removed.
4247 (BASE_FLAGS_TO_PASS): Remove XTRAFLAGS_FOR_TARGET.
4248 (EXTRA_HOST_FLAGS): Remove XTRAFLAGS.
4249 (EXTRA_TARGET_FLAGS, EXTRA_GCC_FLAGS): Likewise.
4250 ($(DO_X)): Don't pass down XTRAFLAGS.
4254 * configure.in (mips*-dec-bsd*): New target; do build linker.
4255 (mips*-*-bsd*): New target; don't build linker.
4259 * configure.in: support rs6000-*-lynxos* configuration.
4260 support sunos4 as a cross target.
4262 * config.sub: look for lynx*, not lynx since the OS version may
4263 legitimately be part of the name.
4267 * configure.in (i[34]86-*-sco*): Move to be with other i386
4269 (romp-*-*): New target. Skip various binary utilities.
4270 (vax-*-*): New target. Don't build newlib.
4271 (vax-*-vms): Renamed from *-*-vms. Don't build opcodes or newlib.
4275 * configure.in: Only set host_makefile_frag if config
4280 * install.sh: If $dstdir exists, don't check whether each
4285 * test-build.mk (HOLES): Add sleep; used by rcs/src/conf.sh.
4289 * configure.in (*-*-lynxos*): Don't configure newlib for either
4290 native or cross Lynx.
4294 * config.sub (sparc64-elf): Fix os.
4295 (z8k): Remove duplicate.
4299 * Makefile.in (gcc-no-fixedincludes): Touch gcc/include/fixed, not
4300 gcc/stmp-fixproto, to try to prevent fixproto from being run.
4304 * configure: Make file links cleanly even if Lynx fails on
4305 an NFS symlink (at least fail cleanly).
4309 * test-build.mk (CC): For mips-sgi-irix4, change -XNh1500 to
4314 * configure: Unknown options are fatal again.
4318 * configure: Ignore --x-includes and --x-libraries, for Autoconf
4323 * build-all.mk: Add `clean' target.
4327 * config.guess: Add SINIX support.
4328 * configure.in: Add mips-*-sysv4* support.
4332 * build-all.mk: Document all useful targets.
4333 If canonhost is sparc-sun-solaris2.3, change it to sparc-sun-solaris2.
4334 If canonhost is mips-sgi-irix4.0.5H, change it to mips-sgi-irix4.
4338 * configure: Support --silent, --quiet.
4342 * configure: Support --disable-FEATURE.
4346 * config.guess: Recognize NCR running SVR4.3.
4350 * config.guess: Make BSDI generate i386-unknown-bsd386.
4355 * configure.in (powerpc-*-aix*): Treat like rs6000-*-*.
4359 * configure: Make unrecognized options give nonfatal warnings
4360 instead of fatal errors, and pass them to any subdirectory
4361 configures in case they recognize them.
4362 Make --x equivalent to --with-x.
4366 * configure: Add --enable-* options. Clean up usage message and
4371 * Makefile.in (NM_FOR_TARGET): Build tree version is now nm.new.
4375 * configure.in (hppa*-*-*): Enable binutils.
4379 * config.sub: Recognize cisco.
4383 * Makefile.in (CXXFLAGS): Add -fexternal-templates.
4387 * config.guess: about target *-hitachi-hiuxwe2, don't print more
4388 than one configuration name. Add comment.
4392 * config.guess: about target *-hitachi-hiuxwe2, fixed
4393 machine guessing order. [Hitachi's CPU_IS_HP_MC68K
4394 macro is incorrect.]
4398 * Makefile.in (TAGS): Just build TAGS in each subdirectory, rather
4399 than the "make ls" stuff which used to be here.
4403 * config.guess: Recognize i[34]86-unknown-freebsd.
4408 * configure.in (noconfigdirs for alpha): Remove libg++ and libio.
4412 * config.guess: Check for ptx.
4416 * config.sub: Add os9k checking.
4420 * config.guess: Handle OSF1 running on HPPA processors
4424 * configure: If subdir configure fails, print out a message with
4425 subdirectory name, in case subdir's configure code didn't identify
4430 * configure.in: Remove embedded newlines from configdirs.
4431 Avoid mismatches of substrings. Fix matching strings at end
4434 Fri Feb 11 15:33:33 1994 Stu Grossman (grossman at cygnus.com)
4436 * config.guess: Add Lynx/rs6000 config support.
4440 * configure.in (alpha-dec-osf1*, alpha*-*-*): Build gas.
4444 * configure.in (hppa*-*-osf*): Treat this just like most other
4445 PA configurations (eg no binutils or ld).
4446 (hppa*-*-*elf*): These configurations have binutils and ld.
4454 * configure.in (rs6000-*-*): Build gas.
4458 * Makefile.in: Avoid bug in losing hpux sed.
4462 * Makefile.in, test-build.mk: Remove MUNCH_NM; it was only needed
4463 for GDB and GDB has been fixed to not need it.
4465 Mon Jan 31 18:40:55 1994 Stu Grossman (grossman at cygnus.com)
4467 * config/mh-lynxosrs6k: Account for lack of ranlib!
4471 * config.guess: Recognize vax hosts.
4475 * configure (while loop): Don't use "break 2" inside case
4476 statement -- the case statement isn't an enclosing loop.
4480 * config.guess: Clean up NeXT support, to allow nextstep
4481 on Intel machines. Make OS be nextstep.
4485 * config.guess: Add alternate forms for Convex.
4487 Thu Jan 20 16:13:41 1994 Stu Grossman (grossman at cygnus.com)
4489 * configure: Completely rewrite option processing. Take
4490 advantage of pattern-matching to avoid invoking test frequently.
4491 Also clean up host and target defaulting logic.
4495 * Makefile.in: Replace all occurrances of "rootme" with "r" and
4496 "$${rootme}" with "$$r", to increase the likelihood that the do-*
4497 commands (plus user environment) will fit SCO limits.
4501 * configure.in: Don't issue warnings about directories which are
4502 not being configured if -norecursion is set. Correct test for
4503 --with-gnu-as and --with-gnu-ld to not get confused by substring
4506 * configure.in: Don't build gas for alpha-dec-osf1*.
4508 Tue Jan 4 17:10:19 1994 Stu Grossman (grossman at cygnus.com)
4510 * configure: Back out Per's change of 12/19/1993. It changes the
4511 behavior of configure in unexpected and confusing ways.
4513 Also, use different delim char when calculating
4514 program_transform_name so that the name can contain slashes.
4518 * configure.in, config.sub: Add support for VSTa micro-kernel.
4522 * configure.in: Nuke hacks which were used to get a special
4523 version of GAS for HPPA configurations.
4527 * configure: If only ${target_alias} is given, use that
4528 as the default for ${host_alias}.
4529 * configure: Add missing back-slashes before nested quotes.
4533 * Makefile.in (BASE_FLAGS_TO_PASS): add YACC=$(BISON)
4537 * config.guess: Recognize some Tektronix configurations.
4542 * config.sub: Match any flavor of SH.
4546 * configure.in: Don't try to configure newlib for Alpha.
4550 * configure.in: Don't build ld for Irix 5. Don't build gas,
4551 libg++ or libio for any Alpha target.
4553 * configure.in (mips*-sgi-irix5*): New target; use mh-irix5.
4554 * config/mh-irix5. New file for Irix 5.
4558 * Makefile.in (GZIPPROG): Renamed from GZIP, which gzip uses for
4559 default arguments -- so it tried to compress itself.
4563 * configure.in (notsupp): ensure that a space is always at the end
4564 of the configdirs list, since the grep checks for an explicit space
4568 * configure.in (target i386-sysv4.2): don't build ld, since static
4569 versions of many libraries are not available.
4573 * config.guess: Recognize Apollos (using environment variables).
4574 * configure.in: Don't configure ld, binutils, or gprof for Apollo.
4578 * config.guess: Recognize Sony news mips running newsos.
4582 * Makefile.in (all-cygnus, build-cygnus): "fi else" needs to be
4583 "fi ; else" for bash.
4587 * Makefile.in (BASE_FLAGS_TO_PASS): pass SHELL.
4591 * config.sub: accept unixware as an alias for svr4.2.
4592 Fix some inconsistancies with the gcc version.
4596 * Makefile.in (DISTDOCDIRS): Add gdb.
4600 * Makefile.in (DISTDOCDIRS): Add libg++ and libio.
4604 * Makefile.in (taz): Only build "info" in DISTDOCDIRS.
4605 (DISTDOCDIRS): Don't assume libg++ and gdb folks necessarily want
4610 * config.sub: Accept hiux* as an OS name.
4612 * Makefile.in: Change RUNTEST_FLAGS back to RUNTESTFLAGS per
4613 etc/make-stds.texi. The underscore came from gcc, and dje now
4614 agrees that RUNTESTFLAGS is the correct name.
4618 * install.sh: Remove 'set -e'. It makes any conditionals
4619 in the script useless.
4621 * config.guess: Automatically recognize arm-acorn-riscix
4626 * Makefile.in: Change RUNTESTFLAGS to RUNTEST_FLAGS
4630 * Makefile.in (DISTDOCDIRS): New variable.
4631 (taz): Edit local Makefile.in sooner, instead of proto-toplev
4632 Makefile.in later. Build "info" and "dvi" in DISTDOCDIRS.
4636 * configure.in (hppa target): check the source directory for the
4641 * config.sub: Allow -aout* and -elf*.
4645 * configure.in: Don't build ld on i386-solaris2, same as for
4650 * Makefile.in (taz): Add texinfo/lgpl.texinfo (for libg++).
4654 * configure.in: Configure gdb for alpha.
4658 * Makefile.in (CXXFLAGS): Add -O.
4662 * config.guess: added support for DG Aviion
4666 * configure.in: Produce warning message for subdirectories not
4667 configurable for this host/target combination. Don't try to
4668 configure gdb for vms.
4672 * Makefile.in (taz): Replace "byacc" with "bison -y" in the
4673 appropriate files before making "diststuff".
4674 (DISTBISONFILES): New var: list of files to be edited.
4675 (DISTSTUFFDIRS): Add binutils.
4679 * config.sub: also handle mipsel and mips64el (for little endian mips)
4683 * configure.in: Add * to end of all OS names.
4687 * configure.in: Build newlib for LynxOS native.
4691 * config.guess: Add support for delta 88k running SVR3.
4693 * configure.in: Add comment about HP compiler vs. emacs.
4697 * configure.in: don't build ld on solaris2 (not a viable option
4698 due to bugs in getpwnam & getpwuid)
4702 * configure.in: Accept alpha-dec-osf1*, not just -osf1, since
4703 config.guess will produce a full version number.
4707 * configure.in: Build linker and binutils for alpha-dec-osf1.
4711 * Makefile.in: Remove -O from CXXFLAGS for consistency with CFLAGS,
4712 and gdb/testsuite/Makefile.in.
4716 * configure.in: recognize mips*- instead of mips-
4720 * config.sub: Accept linux*coff and linux*elf as operating
4725 * config.sub: Recognize mips64, and mips3 as an alias for it.
4729 * configure.in: Remove alpha-dec-osf*, no longer necessary now that
4730 gdb knows how to handle OSF/1 shared libraries.
4734 * configure.in: Recognize hppa*-*-hiux* (currently synonym for hpux).
4735 * config.guess: Recognize Hitachi's HIUX.
4736 * config.sub: Recognize h3050r* and hppahitachi.
4737 Remove redundant cases for hp9k[23]*.
4741 * configure.in: default to '--with-gnu-as' and '--with-gnu-ld'
4742 if gas and ld are in the source tree and are in ${configdirs}.
4743 If ${use_gnu_as} or ${use_gnu_ld} are 'no', then don't set the
4744 the --with options (but still pass them down on the command line,
4745 if they were explicitly specified).
4749 * configure: substitute SHELL value in Makefile.in with
4754 * configure.in: Build gas, ld, and binutils for *-*-sysv4* and
4755 *-*-solaris2* targets.
4759 * Makefile.in: define M4, and pass it down to sub-makes;
4760 all-autoconf now depends on all-m4
4764 * Makefile.in ({AR,RANLIB}_FOR_TARGET): make contingent on
4765 presence of {ar,ranlib} instead of a configured directory
4769 * config.guess: Accept 34?? as well as 33?? for NCR.
4773 * configure.in: grab mt-hppa for HPPA targets; use 'gas ' instead
4774 of 'gas' in sed commands, since 'gash' is now in the tree as well.
4778 * configure: grab values for $(CC) and $(CXX) from the
4779 environment, so that someone can do "CC=gcc configure; make" and
4780 have it work right (matching the way that autoconf works now)
4782 * configure.in, Makefile.in: add support for gash, the tcl
4785 * config.guess: add NetBSD variants (hp300, x86)
4789 * install.sh: Support -d option (in the manner of SunOS 4 install,
4790 as it is more deterministic than that of GNU install)
4791 (chmodcmd): Set file to mode 755 by default (should also do default
4792 chgrp and chown, but I don't feel like dealing with that now)
4796 * config.sub: Remove h8300hhms alias.
4800 * configure.in: Match *-*-solaris2* not *-sun-solaris2*.
4804 * Makefile.in (gcc-no-fixedincludes): touch stmp-fixproto as well
4809 * config.sub: recognize m88110-bug-coff.
4813 * Makefile.in (all-libio): all dependencies on the toolchain used
4814 to build this (gcc, gas, ld, etc)
4818 * config.guess: Deal with OSF/1 1.3 on alpha.
4822 * install.sh: add some 'else true' clauses for portability
4824 * configure.in: don't build libio for h8[35]00-*-* targets
4828 * Makefile.in: Add support for new libio.
4832 * install.sh: If one command fails, don't try the rest. Don't try
4833 to remove $dsttmp (via trap) unless we have already created it.
4834 If $src doesn't exist, detect it and exit with an error.
4836 * config.guess: Recognize BSD on hp300.
4840 * config.guess: Map (9000/[34]??:HP-UX:*:*) to m68k-hp-hpux.
4845 * Makefile.in (all-send-pr): depends on all-prms
4849 * config.guess: Fix typo (9000/8??:4.3bsd -> 9000/7??:4.3bsd).
4854 Added test for mips-mips-riscos5.
4858 * configure.in: use mh-hp300 for 68k HP hosts
4862 * configure: add support for CONFIG_SHELL, so that you can use
4863 some alternate shell for evaluating configure scripts
4867 * Makefile.in (make-gdb.tar.gz): Sed bug reporting address
4869 distribution archive.
4870 * Makefile.in (COMPRESS): Remove def.
4871 * Makefile.in (gdb.tar.gz, make-gdb.tar.gz): Renamed from
4872 gdb.tar.Z and make-gdb.tar.Z respectively.
4873 * Makefile.in (make-gdb.tar.gz): Now only build gzip'd archive.
4874 * Makefile.in (make-gdb.tar.gz): Minor changes to move closer
4875 to convergence with 'taz' target in Makefile.in.
4879 * install.sh (dsttmp): use trap to ensure that tmp files go
4880 away on error conditions
4884 * Makefile.in (BASE_FLAGS_TO_PASS): remove LOADLIBES
4888 * Makefile.in (install-dirs): Deal with a prefix like /gnu;
4889 its parent is '/' not ''.
4891 * Makefile.in (DEVO_SUPPORT): Add comments about ChangeLog.
4895 * configure: if ${newsrcdir}/configure doesn't exist, don't assume
4896 that ${newsrcdir}/configure.in does.
4900 * test-build.mk: support for CONFIG_SHELL
4904 * config.sub (netware): Add as a basic system type.
4908 * Makefile.in (Makefile): depend on configure.in. Also drop the
4909 $(srcdir)/ from the dependency on Makefile.in.
4913 * config.sub: Recognize h8300hhms as h8300h-hitachi-hms.
4914 (h8300hhms is temporary until multi-libraries are implemented).
4915 * configure.in: Handle h8300h too.
4919 * config.guess: Recognize dpx/2 as m68k-bull-sysv3.
4923 * configure: Remove extraneous output when guessing host type.
4924 * config.guess: Remove extraneous output when guessing using C
4925 compiler rather than uname, or when guessing fails.
4927 Wed Jul 7 17:58:14 1993 david d `zoo' zuhn (zoo at rtl.cygnus.com)
4929 * Makefile.in: remove all.cross and install.cross targets
4931 * configure: remove CROSS=-DCROSS_COMPILE and ALL=all.cross
4936 * configure.in (target sh): Build gprof.
4938 Thu Jul 1 16:52:56 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4940 * config.sub: change -solaris to -solaris2
4944 * configure.in: Use config/mh-riscos for mips-*-sysv*.
4948 * configure: Correct error message for missing Makefile.in to
4949 print correct directory.
4951 Tue Jun 29 13:52:16 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4953 * install.sh: kludge around 386BSD shell bug
4957 * config.guess: Recognize NeXT.
4958 * config.guess: Recognize i486-ncr-sysv4.
4959 * Makefile.in (taz): rm $(TOOL)-$$VER before linking.
4963 * Makefile.in (MAKEINFOFLAGS): New variable.
4964 (FLAGS_TO_PASS): Pass MAKEINFO as MAKEINFO MAKEINFOFLAGS.
4965 * build-all.mk, test-build.mk: Pass down --no-split as
4966 MAKEINFOFLAGS when hosted on DOS. Compile DOS hosted without -g.
4970 * Makefile.in (DEVO_SUPPORT): Add COPYING COPYING.LIB install.sh.
4974 * Makefile.in (libg++.tar.z): New rule.
4975 * Makefile.in (taz): Replace 'configure -rm' by 'make distclean'.
4976 * Makefile.in (taz): Only do a single chmod.
4978 Fri Jun 18 12:03:10 1993 david d `zoo' zuhn (zoo at majipoor.cygnus.com)
4980 * install.sh: don't use dirname anymore (replaced with sed usage)
4984 * Makefile.in: Change extension for gzip'd files from '.z' to
4985 '.gz' per new FSF standard usage.
4987 Thu Jun 17 16:58:50 1993 david d `zoo' zuhn (zoo at majipoor.cygnus.com)
4989 * configure: put quotes around the final value of program_transform_name
4991 Tue Jun 15 16:48:51 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4993 * Makefile.in: new install.sh support; update install-info rules
4997 * configure.in: Build diff for crosses, but not for go32 host.
4999 * configure.in: Build gprof only for native, and don't build it
5000 for mips-*-*, rs6000-*-*, or i[34]86-*-sco*.
5002 Mon Jun 7 13:12:11 1993 david d `zoo' zuhn (zoo at deneb.cygnus.com)
5004 * configure.in: don't build gas,ld,binutils on for *-*-sysv4
5008 * configure.in (host_tools): Add prms.
5010 Fri Jun 4 13:30:42 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5012 * Makefile.in: install gcc, do installation of $(INSTALL_MODULES)
5013 with $(FLAGS_TO_PASS) on the command line
5015 * config.sub: Recognize lynx and lynxos
5019 * config.sub: Accept -ecoff*, not just -ecoff.
5023 * Makefile.in (taz): Use .gz suffix instead of .z.
5024 (binutils.tar.gz, gas+binutils.tar.gz, gas.tar.gz): Fixed target
5027 Thu Jun 3 00:27:06 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5029 * Makefile.in (vault-install): add an 'else true' (for Ultrix)
5031 Wed Jun 2 18:19:16 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5033 * Makefile.in (install-no-fixedincludes): install gcc last, so
5034 that rebuilds that might happen during 'make install' don't get
5035 bogus gcc include files
5039 Change from Utah for HPPA support:
5040 * config.guess: Recognize hppa1.x-hp-bsd.
5044 * config.guess: Add support for Motorola Delta 68k, up to r3v7.
5047 Tue Jun 1 17:48:42 1993 Rob Savoye (rob at darkstar.cygnus.com)
5049 * config.sub: Add support for rom68k and bug boot monitors.
5053 * Makefile.in: Make all-opcodes depend on all-bfd.
5057 * config.guess: Added special check for i[34]86-univel-sysv4*.
5061 * config.guess: For i[34]86-unknown-sysv4 use UNAME_MACHINE for
5062 the processor rather than assuming i486.
5066 * config.guess: Recognize SunOS6 as Solaris3.
5070 * config.guess: Fix typo. Avoid #elif (not in K&R 1).
5071 Recognize SunOS 5.* only (and not [6-9].*) as being Solaris2.
5075 * build-all.mk (all-cross): New target for Canadian Cross.
5076 Added Q2 go32 targets.
5077 * test-build.mk: Configure go32 cross sparclite-aout and
5078 mips-idt-ecoff -with-gnu-ld. Moved build binary directory from
5079 PARTIAL_HOLE_DIRS to BUILD_HOLES_DIRS.
5081 Mon May 24 15:30:06 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5083 * configure.in: fix Alpha GDB typo; also, don't build DejaGnu for
5084 GO32 hosted toolchains
5086 Mon May 24 14:18:41 1993 Rob Savoye (rob at darkstar.cygnus.com)
5088 * configure: change so "-exec-prefix" gets passed down rather
5089 than "-exec_prefix" so autoconf generated Makefiles get the
5090 exec_prefix set right.
5092 Fri May 21 10:42:25 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5094 * config.guess: get the Solaris2 minor version number
5096 * Makefile.in: add standards.texi and make-stds.texi to ETC_SUPPORT
5100 * config.guess: Recognize some Sequent platforms.
5102 Thu May 20 14:33:48 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5104 * Makefile.in: added the vault-install target
5106 * configure.in: actually use the Sun3 makefile fragment that's in
5107 config, also added the release dir to configdirs
5111 * Makefile.in (taz): Fix modes on stuff in $(TOOL) dir also.
5113 Tue May 18 20:26:41 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5115 * configure.in: remove some program from Alpha targetted toolchains
5119 * Makefile.in (DISTSTUFFDIRS): Renamed from PROTODIRS. Add ld and
5121 (taz): Run "make diststuff" in those directories instead of "make
5122 proto-dir". Look for "VERSION=" only at start of line in subdir
5123 Makefile. Use "gzip -9" for compression.
5124 (TEXINFO_SUPPORT, DIST_SUPPORT, BINUTILS_SUPPORT_DIRS): New vars.
5125 (binutils.tar.z): New target.
5129 * Makefile.in (taz): Include gpl.texinfo.
5133 * Makefile.in (setup-dirs): Merged into "taz" target.
5134 (taz): Only do `proto-dir' stuff if a directory is actually needed
5139 * Makefile.in (MUNCH_NM): New variable, defined to be $(NM).
5140 (FLAGS_TO_PASS): Pass down MUNCH_NM.
5141 (HOST_CC, HOST_PREFIX, HOST_PREFIX_1): New variables.
5142 (EXTRA_GCC_FLAGS): Pass down HOST_* variables.
5143 (gcc-no-fixedincludes): Correct for current gcc Makefile.
5147 * Makefile.in (make-gdb.tar.Z): Add configure, config.guess,
5148 config.sub, and move-if-change to gdb testsuite distribution
5149 archive, so the testsuite can be extracted, configured, and
5150 run separately from the gdb distribution. Blow away the Chill
5151 tests that require a Chill compiled executable, since GNU Chill
5152 is not yet publically available.
5154 Mon May 10 17:22:26 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5156 * test-build.mk: set environment variables in a single command,
5157 instead of a list of assignments and exports
5159 * config.guess: recognize Alpha/OSF1 systems
5163 * configure: Change help message to prefer --options rather than
5168 * config.sub: Convergent Tech. "miniframe" uses m68010, sez
5170 * config.guess: Recognize miniframe.
5172 Sun May 9 17:47:57 1993 Rob Savoye (rob at darkstar.cygnus.com)
5174 * Makefile.in: Use srcroot to find runtest rather than rootme.
5175 Pass RUNTESTFLAGS and EXPECT down in BASE_FLAGS_TO_PASS.
5179 * test-build.mk: Extensive additions to support building on a
5180 machine other than the host.
5184 * configure (tooldir): Fix for i386-aix again.
5188 * configure, Makefile.in: Change definition of $(tooldir)
5193 * config.guess: Recognize i[34]86/SVR4.
5197 * Makefile.in (all-gdb): gdb depends on sim.
5201 * Makefile.in (gdb.tar.Z): Make prototype gdb testsuite directory
5202 at the same time we make the prototype gdb directory.
5203 * Makefile.in (make-gdb.tar.Z): Make the testsuite distribution
5204 files at the same time as the gdb base release distribution.
5208 * Makefile.in (check): Use individual check targets rather than
5214 * config.sub: Use sysv3.2 not sysv32 for canonical OS
5215 for System V release 3.2.
5219 * config.sub: Recognize hppaosf.
5220 * configure.in: Do configure ld/binutils/gas for it.
5224 * configure (tooldir): Alter syntax used to set this, for systems
5225 where "\$" isn't handled right, like i386-aix.
5229 * configure: Pass program-transform-name, not
5230 program_transform_name, to recursive configures.
5234 * Makefile.in (gas+binutils.tar.z): New rule for building snapshots
5239 * config.guess: Recognize AIX3.2 as distinct from 3.1.
5241 Sat Apr 17 17:19:50 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5243 * configure.in: rename m88k-motorola-m88kbcs to m88k-motorola-sysv
5245 * config/mh-delta88: remove extraneous GCC references
5249 * Makefile.in (PRMS): Set back to all-prms.
5253 * test-build.mk: Pass -with-gnu-as for known MIPS native and MIPS
5254 targets, rather than for MIPS hosts.
5256 Fri Apr 9 13:51:06 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5258 * configure.in: add comment for --with-x default values
5260 * config.guess: handle Motorola Delta88 box for SVR3 and SVR4.
5262 * Makefile.in: add check-* targets for each of the directories in
5263 the tree. Add a definition of RUNTEST that will use the one we
5264 just built, if it exists. Pass this down via FLAGS_TO_PASS.
5268 * configure.in: Removed obsolete references to bfd_target and
5269 target_makefile_frag.
5271 * build-all.mk: Set assorted targets for Q2.
5272 * config.sub: Recognize z8k-sim and h8300-hms.
5273 * test-build.mk: Really don't pass host to configure.
5274 (HOLES): Added uname.
5278 * configure: Handle an empty program-prefix, program-suffix or
5279 program-transform-name correctly.
5283 * build-all.mk: -G 8 no longer required for MIPS targets.
5284 * test-build.mk: Don't pass host argument to configure; make it
5289 * Makefile.in (gdb.tar.Z): Fix for building gzip'd distribution.
5290 * Makefile.in (COMPRESS): New macro, like GZIP.
5294 * test-build.mk: Use -with-gnu-as for mips-sgi-irix4 as well.
5296 * build-all.mk: Set GCC to gcc -O -G 8 for MIPS targets, since gcc
5297 with gas currently defaults to -G 0.
5301 * Makefile.in (all-flex): flex depends on byacc.
5303 * build-all.mk: If host not specified, use config.guess. Pass TAG
5304 to test-build.mk as RELEASE_TAG.
5305 * test-build.mk (configargs): New variable containing arguments to
5306 pass to configure. Set to -with-gnu-as on mips-dec-ultrix.
5307 (FLAGS_TO_PASS): Pass down RELEASE_TAG.
5309 * config.guess: Use /bin/uname when checking -X argument on SCO,
5310 to avoid invoking GNU uname which doesn't understand -X.
5312 * test-build.mk: Don't use /usr/unsupported/bin/as on AIX.
5314 * configure.in: Build gas for mips-*-*.
5318 * Makefile.in (all.normal): insert missing backslash.
5322 * build-all.mk, config/mh-irix4: Bump -XNh value to 1500 to match
5325 * Makefile.in: Complete overhaul to merge many almost identical
5330 * Makefile.in (setup-dirs-gdb): Renamed from setup-dirs.
5331 (gdb.tar.Z): Adjusted.
5333 * Makefile.in (setup-dirs, taz): New targets; should be general
5334 enough to adapt for gdb sometime. Build only .z file.
5335 (gas.tar.z): New target.
5339 * build-all.mk: Use CC=cc -Xs on Solaris.
5341 Mon Mar 29 19:59:26 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5343 * config/mh-sun3: cc needs -J to compile cp-parse.c correctly
5345 * config/mh-solaris: SunPRO C needs -Xs to be able to get a
5346 working xmakefile for Emacs.
5351 for handling BISON for FSF releases.
5355 * configure: Actually implement the change zoo just documented.
5357 Wed Mar 24 13:02:44 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5359 * configure: when using config.guess, only set target_alias when
5360 it's not already been set (ie, on the command line)
5362 Mon Mar 22 23:07:39 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5364 * Makefile.in: add installcheck target, set PRMS to install-prms
5366 Sun Mar 21 16:46:12 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5368 * configure: add support for package_makefile_fragment, handle the
5369 case where a directory has a configure.in file but no Makefile.in
5370 more gracefully (with an actual understandable error message, even);
5371 add support for --without (and add this to the usage message); also
5372 explicitly add a --host=${host_alias} to the command line when
5373 config.guess is used
5377 * configure: Must use both --host and --target in recursive calls.
5381 * Makefile.in: Change deja-gnu to dejagnu.
5385 * configure.in (h8300-*-*, h8500-*-*): Don't build libg++.
5387 Fri Mar 12 18:30:14 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5389 * configure.in: canonicalize all instances to *-*-solaris2*,
5390 also strip out a number of tools to not build for go32 host
5394 * config.guess: add GPL.
5396 * Makefile.in, config.guess, config.sub, configure: bump
5401 * Makefile.in (do-info): Removed obsolete check for existence of
5404 * Makefile.in (MAKEOVERRIDES): Define to be empty.
5406 Wed Mar 10 03:11:56 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5408 * Makefile.in: a couple of 'else true' for decstation,
5411 * configure.in: configure tclX too; don't remove Tk on RS/6000 anymore
5415 * Makefile.in (setup-dirs): change invocation of make to $(MAKE).
5417 Mon Mar 8 14:52:11 1993 Ken Raeburn (raeburn@cambridge)
5419 * config.guess: Recognize i386-ibm-aix (PS/2).
5420 * configure.in: Use config/mh-aix386 file for it.
5424 * Makefile.in (GCC_FOR_TARGET): Eliminated definition; use
5425 CC_FOR_TARGET instead.
5426 (BASE_FLAGS_TO_PASS): Pass GCC_FOR_TARGET=$(CC_FOR_TARGET).
5430 * Makefile.in: Add sim to list of directories sent with gdb
5434 * configure.in: Put back mips-dec-bsd* case.
5439 * configure.in (vax-*-ultrix2*): Add Ultrix 2.2 triplet.
5440 * config.guess: Change 'VAX*:ULTRIX:*:*' to 'VAX*:ULTRIX*:*:*'.
5441 * config/mh-vaxult2: New file.
5443 Tue Mar 2 18:11:03 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5445 * configure.in: remove no-op mips-dec-bsd* in "case $target"
5447 * Makefile.in (dir.info): only run gen-info-dir if it exists,
5448 (install-info): install dir.info only if it exists,
5449 (all-expect, install-expect): pass along X11_FLAGS_TO_PASS
5453 * configure.in: For vms target, skip bfd, ld, binutils. Do build
5454 gas for mips-dec-bsd.
5458 * configure (makesrcdir): If ${srcdir} is relative and not ".",
5459 and ${subdir} is not ".", set makesrcdir based on ${invsubdir}.
5463 * configure.in: Added "dejagnu" to hosttools list.
5467 * config.sub, configure.in, config.guess: Add support
5468 for Bosx, an AIX variant from Bull.
5473 * devo/dejagnu: Initial creation of devo/dejagnu.
5474 Migrated dejagnu testcases and support files for testing software
5475 tools to reside as subdirectories, currently called "testsuite",
5476 within the directory of the software tool. Migrated all programs,
5477 support libraries, etc. beloging to dejagnu proper from
5478 devo/deja-gnu to devo/dejagnu. These files were moved "as is"
5479 with no modifications. The changes to these files which will
5480 allow them to configure, build, and execute properly will be made
5485 * Makefile.in: Change send_pr to send-pr.
5486 * configure.in: Likewise.
5487 * send_pr: Renamed directory to send-pr.
5491 * Makefile.in: Add some extra semi-colons (needed if SHELL=bash).
5495 * README: Update for gdb-4.8 release.
5496 * Makefile.in (gdb.tar.Z): Add texinfo/tex3patch. Build
5497 gdb-xxx.tar.z (gzip'd) file also.
5499 Thu Feb 18 09:16:17 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5501 * Makefile.in: make all-diff depend on all-libiberty
5505 * config.guess: add vax-ultrix in the spirit of mips-ultrix.
5507 Tue Feb 16 05:57:15 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5509 * configure.in, Makefile.in: add hello, tar, gzip, recode, indent
5513 * Makefile.in (DEVO_SUPPORT): Remove etc directory
5514 (ETC_SUPPORT): Only add the files GDB wants from etc/.
5515 (gdb.tar.Z): Use ETC_SUPPORT. Use byacc when building the file.
5517 Thu Feb 11 20:14:28 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5519 * Makefile.in: makeinfo binary is in a new location
5523 * config.sub: Accept -ecoff as an OS.
5525 * Makefile.in: Various changes to eliminate a level of make
5526 recursion and reduce the required command line length.
5527 (BASE_FLAGS_TO_PASS): New variable holding flags passed to all
5529 (EXTRA_HOST_FLAGS, EXTRA_TARGET_FLAGS, EXTRA_GCC_FLAGS): New
5530 variables holding settings for specific sub-makes.
5531 (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS, GCC_FLAGS_TO_PASS): Rewrote
5532 in terms of BASE_FLAGS_TO_PASS.
5533 (TARGET_LIBS): New variable listing directories which use
5534 TARGET_FLAGS_TO_PASS.
5535 (subdir_do): Eliminated.
5536 (do-*): New set of targets to replace subdir_do.
5537 (various): All targets which used subdir_do now depend on do-*.
5538 (local-clean): Renamed from do_clean.
5539 (local-distclean): New target, dependency of distclean and
5541 (install-info): Don't create directories. Depend on dir.info
5542 rather than calling make recursively.
5543 (install-dir.info): Eliminated.
5544 (install-info-dirs): Create all info directories here.
5545 (dir.info): Depend upon do-install-info.
5547 * test-build.mk (HOLES): Added false.
5551 * config.guess: Recognize BSDI and BSDJ (Jolitz 386bsd).
5553 Thu Feb 4 20:49:18 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5555 * Makefile.in (info): remove dependency on all-texinfo. The
5556 problem was really in texinfo/C, not at this level.
5560 * Makefile.in (info): Added dependency on all-texinfo (PR 2112).
5564 * Makefile.in (make-gdb.tar.Z): Change BISON to 'bison -y' for
5569 * configure: Include srcdir in message about target of link not
5570 being found. Don't convert `-' to `_' in `with' options being
5573 Tue Feb 2 18:57:59 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5575 * configure.in: add uudecode to host_tools
5577 * Makefile.in: added {all,install}-uudecode targets, added them to
5578 the appropriate lists
5582 * Makefile.in (all-gcc): Added dependency on all-gas.
5584 * configure.in (mips-*-*): Build ld and binutils.
5588 * configure: check return code from mkdir, print error message and
5593 * Makefile.in (make-gdb.tar.Z): New location for texinfo.tex.
5597 * test-build.mk (HOLES): Added tar, cpio and uudecode.
5601 * config.sub (h8500): Recognize this as a cpu type.
5603 Sat Jan 23 20:32:01 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5605 * configure: source directory missing is no longer a warning
5607 * configure.in: recognize irix[34]* instead of irix[34]
5609 * Makefile.in: define and pass down X11_LIB
5611 * config/mh-sco: define X11_LIB to the mess that SCO ODT requires
5615 * guess-systype: Renamed to ...
5616 * config.guess: ... by popular request.
5617 * configure.in, Makefile.in: Update accordingly.
5622 + Add Convex, Cray/Unicos, and Encore/Multimax support.
5623 + Execute ./dummy instead of assuming . is in PATH.
5627 * guess-systype: New shell script. Attempts to guess the
5628 canonical host name of the executing host.
5629 Only a few hosts are supported so far.
5630 * configure: Call guess-systype if no host is specified.
5634 * Makefile.in (gcc-no-fixedincludes): Made to work with current
5640 * Makefile.in (GCC_FLAGS_TO_PASS): New variable.
5641 (all-gcc, install-gcc, subdir_do): Use it.
5645 * Makefile.in: Rename uninstalled gcc driver from gcc to xgcc.
5649 * Makefile.in: Removed explicit setting of SUBDIRS. SUBDIRS is now
5650 set exclusively by configure, using configure.in .
5652 Wed Jan 6 13:44:11 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5654 * test-build.mk: set $PATH for all builds
5656 * Makefile.in: pass TARGET_FLAGS_TO_PASS for xiberty and libm
5660 * Makefile.in (GCC_FOR_TARGET): Supply a default that matches
5661 the one used in gcc/Makefile.in, so that a null expansion doesn't
5662 override the one needed to build gcc with a native cc.
5667 * configure: Accept -with arguments.
5671 * Makefile.in: added h8300sim
5675 * config/mh-sco: Don't override BISON definition.
5677 * build-all.mk: If canonhost is i386-unknown-sco3.2v4, change it
5678 to i386-sco3.2v4. Set TARGETS and CFLAGS for i386-sco3.2v4.
5679 (all-cygnus, native, build-cygnus): Make
5680 $(canonhost)-stamp-3stage-done, not $(host)....
5681 * test-build.mk (stamp-3stage-compared): Use tail +10c for
5682 i386-sco3.2v4. Added else true to if command.
5686 * config.sub: (from FSF) Sequent uses a BSD-like OS.
5690 * configure.in (i[34]86-*-isc*): added; uses mh-sysv.
5692 Thu Dec 24 17:26:24 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5694 * configure.in: don't remove binutils from Solaris builds
5698 * Makefile.in: get rid of earlier definitions for *clean,
5699 also handle the recursive info rule better
5703 * Makefile.in (mostlyclean, distclean, realclean): Fix to
5704 do more-or-less the right thing.
5708 * Makefile.in: Add lines defining CC and CXX, and use CXX rather
5709 than gcc in definitions of CXX_FOR_BUILD and CXX_FOR_TARGET.
5711 Tue Dec 15 00:34:32 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5713 * Makefile.in: change all $(host_cpu)-$(host_vendor)-$(host_os) to
5716 * configure.in: split the configdirs list into 4 categories (native
5717 v. cross, library v. tool) and handle the cross-only and native-
5718 only in more reasonable (and correct!) way.
5720 Mon Dec 14 17:04:22 1992 Stu Grossman (grossman at cygnus.com)
5722 * configure.in (hppa*-*-*): Don't remove bfd and gdb from
5725 Sun Dec 13 00:37:26 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5727 * Makefile.in: extensive cleanup:: removed all of the explicit
5728 clean-* targets, collapsed many wrappers around subdir_do into
5729 one, added additional targets to satisfy standards.texi, deleted
5730 some old targets, some changes for consistency
5732 Fri Dec 11 20:18:02 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5734 * configure.in: handle some programs as cross-only, and others as
5737 * test-build.mk: handle partial holes in a more generic manner
5739 * Makefile.in: m4 depends on libiberty
5741 Mon Dec 7 06:43:27 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5743 * config/mh-sco: don't default $(CC) to gcc
5745 Thu Dec 3 21:52:11 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5747 * configure.in: add m4, textutils, fileutils, sed, shellutils,
5748 time, wdiff, and find to configdirs
5750 * Makefile.in: all, clean, and install rules for the new programs
5751 added to configure.in
5753 Mon Nov 30 14:54:34 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5755 * configure.in: use mh-sun for all *-sun-* hosts
5757 * config/mh-solaris: rework standard X location to use
5758 $OPENWINHOME, if defined.
5760 * config/mh-sun: handle X11 include locations
5762 * config/mh-decstation: define NeedFunctionPrototypes to 0, to
5763 work around dain-bramaged DECwindows include files
5765 Fri Nov 27 18:35:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5767 * Makefile.in: define flags for X11 include files and library file
5768 locations, pass them down to the programs that need this info
5770 * build-all.mk: added a 'native' target, to 3stage the native toolchain
5772 * config/{mh-hpux,mh-solaris}: define the "standard" locations for
5773 the vendor supplied X11 headers and libraries
5775 Sun Nov 22 18:59:13 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5777 * configure.in: start building libg++ for HP-UX targets
5781 * README: Update references to files moved into etc/.
5785 * config.sub (i386sol2, i486sol2): i[34]86-unknown-solaris2.
5786 * configure.in (i[34]86-*-solaris2*): Use config/mh-sysv4.
5790 * configure: accept dash as well as underscore in long option
5791 names for FSF compatibility.
5795 * config.sub: added -sco3.2v4 support from FSF.
5797 Sun Nov 8 21:14:30 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5799 * configure.in: expand the section that adds or removes
5800 directories from the list of programs to build, to handle native
5801 vs. cross in addition to host v. native
5805 * Makefile.in: Replace C++ in macro names with CXX.
5806 This is less likely to break ...
5808 Sat Nov 7 15:16:58 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5810 * test-build.mk: add -w to GNU_MAKE
5812 Fri Nov 6 23:10:37 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5814 * config.sub: remove 'sparc'-->'sparc-sun' default transformation,
5815 add 'sparc' to list of recognized cpus. This needed to make
5816 'sparc-aout' expand to 'sparc-unknown-aout' instead of 'sparc-sun-aout'.
5817 Delete some redundant ose68 variants. Recognize -wrs as an os,
5818 then changes that into $CPU-wrs-vxworks.
5820 * configure.in: remove most references to gdbtest, regularize
5821 target based program removal
5823 * test-build.mk: import from p3 tree (many fixes and changes)
5827 * Makefile.in: added rules to handle tcl, tk, and expect
5829 * configure.in: handle those directories if they exist
5831 Thu Nov 5 14:35:41 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5833 * config.sub: removed bogus hppabsd and hppahpux names, since
5834 "hppa" is not a valid cpu (hppa1.1 or hppa1.0 are, though)
5836 Thu Oct 29 00:12:41 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5838 * Makefile.in: all-gcc now depends on all-binutils. all-libg++
5839 depends upon all-xiberty
5841 * Makefile.in: changes from p3, including:
5845 * Makefile.in (XTRAFLAGS): include newlib directories if
5846 newlib/Makefile exists, rather than if host != target.
5850 * Makefile.in: added -nostdinc to XTRAFLAGS if we are using gcc
5851 from the same source tree and not building a cross-compiler. This
5852 matters for the libg++ configuration if reconfiguring a tree that
5853 has already been installed.
5857 * Makefile.in: added -I for newlib/targ-include to XTRAFLAGS, to
5858 pick up the machine and system specific header files.
5860 * Makefile.in: added AS_FOR_TARGET, passed down in
5861 TARGET_FLAGS_TO_PASS. Added CC_FOR_BUILD, which is intended to be
5862 the C compiler to use to create programs which are run in the
5863 build environment, set it to default to $(CC), and passed it down
5864 in FLAGS_TO_PASS and TARGET_FLAGS_TO_PASS.
5868 * Makefile.in: add $(host) = $(target) tests back to *_FOR_TARGET.
5869 We need them for unusual native builds, like systems without
5872 * configure: also define $(host_canonical) and
5873 $(target_canonical), which are the full, canonical names for the
5874 given host and target
5878 * Makefile.in: Added separate definitions for C++.
5882 * configure.in (configdirs): Add deja-gnu.
5886 * README: Update for configure.texi and gdb-4.7 release.
5890 * Makefile.in: Move "all" target to top of file.
5891 Previously, first target was ".PHONY" which caused BSD4.4 make
5892 to build .PHONY when make was run without arguments.
5896 * Makefile.in: Add COPYING.LIB to GDB releases, now that there's
5897 Library-copylefted code in libiberty.
5901 * config.sub: Replace m68kmote with plain old m68k.
5905 * Makefile.in: Remove space from blank line, avoid Make complaints.
5909 * config.sub: Complain if no argument is given. Added support for
5910 386bsd as OS and target alias.
5914 * Makefile.in (XTRAFLAGS): include newlib directories if
5915 newlib/Makefile exists, rather than if host != target.
5917 Mon Oct 5 03:00:09 1992 Mark Eichin (eichin at tweedledumber.cygnus.com)
5919 * config.sub: recognize sparclite-wrs-vxworks.
5921 * Makefile.in (install-xiberty): added *-xiberty make rules (from
5922 p3.) Added clean-xiberty to clean.
5924 Thu Oct 1 17:59:19 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5926 * configure.in: use *-*-* instead of nested cases for host and target
5930 * Makefile.in: added -nostdinc to XTRAFLAGS if we are using gcc
5931 from the same source tree and not building a cross-compiler. This
5932 matters for the libg++ configuration if reconfiguring a tree that
5933 has already been installed.
5937 * config.sub (i486v/i486v4): Merge in from FSF version.
5941 * configure: only set PWD if it is already set.
5945 * configure: just set PWD=`pwd` at the top, since Ultrix sh
5946 doesn't have unset and all success paths (and most error paths)
5947 out set it anyway. (Note: should change all uses of ${PWD=`pwd`}
5948 to just ${PWD} to avoid confusion.)
5952 * configure: always set $(tooldir) to $(libdir)/$(target_alias),
5953 even for a native compilation.
5957 Changes to make the gdb.tar.Z rule work better.
5959 * Makefile.in (GDB_SUPPORT_DIRS): Add opcodes.
5960 (DEVO_SUPPORT): Add configure.texi.
5961 (bfd-ilrt.tar.Z): Remove ancient rule.
5965 * Makefile.in: added -I for newlib/targ-include to XTRAFLAGS, to
5966 pick up the machine and system specific header files.
5968 * configure.in, config.sub: added new target m68010-adobe-scout,
5969 with alias of adobe68k. Changed configure.in to check for
5970 -scout before -sco* to avoid a false match.
5972 * Makefile.in: added AS_FOR_TARGET, passed down in
5973 TARGET_FLAGS_TO_PASS. Added CC_FOR_BUILD, which is intended to be
5974 the C compiler to use to create programs which are run in the
5975 build environment, set it to default to $(CC), and passed it down
5976 in FLAGS_TO_PASS and TARGET_FLAGS_TO_PASS.
5980 * Makefile.in: added TARGET_FLAGS_TO_PASS, CC_FOR_TARGET,
5981 AR_FOR_TARGET, RANLIB_FOR_TARGET, NM_FOR_TARGET. Pass
5982 TARGET_FLAGS_TO_PASS, which defines CC, AR, RANLIB and NM as the
5983 FOR_TARGET variants, to newlib and libg++.
5987 * Makefile.in (all-gas, all-gdb): Require all-opcodes to be built
5992 * config.sub: Accept `elf' as an environment.
5996 * Makefile.in (all-opcodes): cd into the right directory
6000 * configure: added -program_transform_name option, used as
6001 argument to sed when installing programs.
6002 configure.texi: added documentation for -program_prefix,
6003 -program_suffix and -program_transform_name.
6007 * config.sub: Accept i486 where i386 ok.
6011 * config.sub: accept we32k
6015 * config.sub, configure.in: accept OSE68000 and OSE68k.
6017 * Makefile.in: don't create all directories for ``make install'';
6018 let the subdirectories create the ones they need.
6020 Tue Aug 11 23:13:17 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
6022 * COPYING: new file, GPL v2
6024 Tue Aug 4 01:12:43 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
6026 * Makefile.in: use the new gen-info-dir, which needs a template
6027 argument (which also lives in texinfo)
6029 * configure.texi, standards.texi: fix INFO-DIR-ENTRY
6031 Mon Aug 3 15:41:28 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
6033 * config/mh-solaris: removed the -xs from CFLAGS (let the people
6034 with Sun's C compiler deal with it themselved)
6038 * config.sub (ncr3000): Change i386 to i486.
6040 Thu Jul 23 00:12:17 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
6042 * Makefile.in: add install-rcs, install-grep to
6043 install-no-fixedincludes, removed install-bison and install-libgcc
6047 * configure.in: grab the HPUX makefile fragment if on HPUX
6051 * Makefile.in: eradicate bison spoor (ditto libgcc).
6052 configure.in: recognise m68{k,000}-ericsson-OSE.
6053 es1800 is alias for m68k-ericsson-OSE
6055 Sun Jul 19 17:49:02 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
6057 * configure.in: rearrange the parts that remove programs from
6058 configdirs, based now on HOST==TARGET or by canonical triple.
6062 * test-build.mk: recurse explicitly with -f test-build.mk when
6063 appropriate. predicate stage3 and comparison on the existence
6064 of gcc. That is, if gcc isn't around, we aren't three-staging.
6065 On very clean, also remove ...stamp-co. Build in-place before
6070 * Makefile.in, configure.in: add tgas
6074 * Makefile.in: a number of changes merged in from progressive.
6076 * configure.in: add libm.
6078 * .cvsignore: ignore some stuff that comes from test-build.mk.
6080 Wed Jul 8 00:01:30 1992 Stu Grossman (grossman at cygnus.com)
6082 * config/mh-solaris: Use -xs when compiling so that Sun-C puts
6083 a symbol-table into the executable.
6087 * config.sub: Add es1800 (m68k-ericsson-es1800).
6091 * configure: Add program_suffix (parallel to program_prefix)
6092 * Makefile.in: adjust directory-creating script for losing decstation
6096 * configure: Minor $subdir-related fixes.
6100 * configure: fix various problems with propogating
6101 makefile_target_frag in subdirs.
6102 * configure.in: config libgcc if its there
6104 Fri Jun 19 15:19:40 1992 Stu Grossman (grossman at cygnus.com)
6106 * config.sub: HPPA merge.
6110 * config/mh-ncr3000 (INSTALL): Don't use /usr/ucb/install,
6111 it is broken on ncr 3000's.
6113 Sun Jun 14 10:29:19 1992 John Gilmore (gnu at cygnus.com)
6115 * Makefile.in: Replace all-bison with all-byacc in all
6116 dependency lines for other tools (which now use byacc).
6118 Fri Jun 12 22:21:57 1992 John Gilmore (gnu at cygnus.com)
6120 * config.sub: Add sun4sol2 => sparc-sun-solaris2.
6122 Tue Jun 9 17:18:11 1992 Fred Fish (fnf at cygnus.com)
6124 * config/{mh-ncr3000, mh-sysv4}: Add INSTALL.
6128 * Makefile.in: make gprof rules similar to byacc rules (instead of
6129 vestigal $(unsubdir) that didn't work...)
6133 * config.sub: Add support for Linux.
6134 * Makefile.in: Use $(FLAGS_TO_PASS) more consistently
6135 (at least for libg++).
6139 * configure.texi: fix doc for the -nfp option to configure
6143 * Makefile.in (all-binutils): ar needs flex, so depend on all-flex.
6145 Sun May 31 15:04:08 1992 Mark Eichin (eichin at cygnus.com)
6147 * config.sub: changed [^-]+ to [^-][^-]* so that it works under
6148 Sun sed. (BSD 4.3 sed doesn't handle [^-]+ either.)
6149 * configure.in: added solaris* host_makefile_frag hook.
6151 Sun May 31 01:10:34 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
6153 * config.sub: changed recognition of m68000 so that various
6154 m68k types can be specified via m680[01234]0
6156 Sat May 30 21:01:06 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
6158 * config.sub (basic_machine): fix sed so that '-foo' isn't
6159 completely substituted out while .+'-foo' loses the '-foo'
6163 * config.sub ($os): Add -aout.
6167 * configure: If host_makefile_frag is absolute, don't
6168 prefix ${invsubdir} (relevant to libg++ auto-configure).
6172 * Makefile.in (tooldir): Define it.
6173 (all-ld): Depend on all-flex.
6177 * Makefile.in (check): Fix libg++ special case.
6181 * configure: do not bury `pwd` into config.status, thus do fewer
6184 * configure: print the "Building in" message only when building in
6185 other than "." AND verbose.
6187 * configure: remove -s, rework -v to better accomodate guested
6190 * standards.texi: updated to 3 may, fixed librid <-> libdir typo.
6194 * Makefile.in: macroize flags passed on recursion. remove
6199 * configure: get makesrcdir right for subdirs deeper than 1.
6201 * Makefile.in: pass INSTALL, INSTALL_DATA, INSTALL_PROGRAM on
6206 * Makefile.in: don't print subdir_do or recursion lines.
6210 * standards.texi: added menu item.
6212 * Makefile.in: build and install standards.info.
6214 * standards.texi: new file.
6218 * configure: test for and move config.status pieces from
6223 * config/mh-delta88, config/mh-ncr3000: Replace MINUS_G with
6224 CFLAGS per new configuration strategy.
6225 * configure: Test for existance of files before trying to mv
6226 them, to avoid numerous non-existance messages.
6230 * configure: correct final line of config.status.
6232 * configure: patch from eggert. Avoids a protection problem if
6233 the original Makefile.in is read only.
6235 * configure: use move-if-change from gcc to create config.status.
6236 Some makefiles depend on config.status to tell if a directory
6237 has been reconfigured for a different host. This change
6238 prevents those directories from remaking everything in the case
6239 where the reconfig was only intended to rebuild a Makefile.
6241 * configure: test for config.sub with "config.sub sun4" rather
6242 than "config.sub ${host_alias}". Otherwise we can't tell a bad
6243 host alias from a missing config.sub.
6247 * Makefile.in: explicitly pass CFLAGS on recursion. no longer pass
6248 MINUS_G (this can be done with CFLAGS). Default CFLAGS to -g.
6252 * configure: mkdir ${subdir} as needed.
6256 * Makefile.in,configure.in: added autoconf.
6260 * Makefile.in: no longer pass against on recursion.
6262 * Makefile.in: added .NOEXPORT: so that stray makefile_frag
6263 definitions are not inherited.
6265 * configure: correct makesrcdir when subdir is .
6269 * configure: Add support for 'subdirs' variable, which is
6270 like 'configdirs', except that configure doesn't re-invoke
6271 itself for subdirs, it just creates a Makefile for each subdir.
6272 * configure.texi: Document subdirs.
6274 Mon Apr 13 18:50:16 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
6276 * configure.in: added flex to configdirs
6280 * Makefile.in: remove clean-stamps from clean.
6282 Sat Apr 11 03:52:03 1992 John Gilmore (gnu at cygnus.com)
6284 * configure.in: Add gdbtest to configdirs.
6288 * Makefile.in (MINUS_G): Add macro, default to -g, pass on
6290 * configure.in: Recognize new ncr3000 config.
6294 * Makefile.in, configure.in: removed references to gdbm.
6298 * config.sub: Don't canonicalize os value
6299 newsos* to bsd (readline needs to check for newsos).
6300 (This fix was earlier made Jan 31, but got re-broken.)
6302 Mon Apr 6 14:34:08 1992 Stu Grossman (grossman at cygnus.com)
6304 * configure.in: sco is an os, not a vendor!
6306 * configure: Quote $( better. Keep various shells happy.
6310 * Makefile.in: eliminate stamp-files.
6314 * Makefile.in: add send_pr. remove "force" from .stmp-gprof rule.
6315 Supress echoing of all the "if [ -d ... $(MAKE)" lines.
6319 * config.sub: fix iris/iris3.
6323 * configure: re-add -rm.
6327 * Maskefile.in: add .stmp-rcs to all.
6329 * configure.in: remove gas from rs6000 build, use aix host fragment.
6333 * configure: pass down site_option during recursion.
6335 Thu Mar 19 16:49:36 1992 Stu Grossman (grossman at cygnus.com)
6337 * Makefile.in (all.cross): Add .stmp-bfd .stmp-readline.
6341 * configure: Change exec_prefix so that it really defaults to prefix.
6345 * Makefile.in, configure.in: Add support for mmalloc library.
6349 * Makefile.in: add stmp dependencies for a few more things.
6353 * configure: adjusted error message on objdir/srcdir configure
6354 collision, per john's suggestion.
6356 * Makefile.in: add libiberty stmp to all and all.cross.
6360 * Makefile.in: remove force dependencies, add grep to all.
6364 * Makefile.in: drop flex. make stamp files work.
6366 * configure: added test for conflicting configuration in srcdir,
6367 remove trailing slashes from srcdir. Otherwise emacs gdb mode
6368 gets cranky. use relative paths for configure and srcdir
6369 whenever possible. Send some error messages to stderr that were
6374 * Makefile.in: Fix libg++ rule to check for gcc directory
6375 before using gcc/gcc. Also pass XTRAFLAGS.
6377 Thu Mar 5 21:45:07 1992 K. Richard Pixley (rich@sendai)
6379 * Makefile.in: added stmp-files so that directories aren't polled
6380 when they are already built.
6382 * configure.texi: fixed a node pointer problem.
6384 Thu Mar 5 12:05:58 1992 Stu Grossman (grossman at cygnus.com)
6386 * config.sub configure.in config/mh-irix4 gdb/configure.in
6387 gdb/mips-tdep.c gdb/mipsread.c gdb/procfs.c gdb/signame.h
6388 gdb/tm-irix3.h gdb/tm-mips.h gdb/xm-irix4.h gdb/config/mt-irix3
6389 gdb/config/mh-irix4 texinfo/configure.in: Port to SGI Irix-4.x.
6393 * configure: -recurring becomes -silent. corrected help message
6396 * Makefile.in: mkdir $(exec_prefix) and $(tooldir).
6400 * configure: when building Makefile for crosses, replace
6401 tooldir and program_prefix. default srcdir from location of
6402 config.sub. remove "for host in hosts" and "for target in
6407 * Makefile.in: Do not pass bindir or mandir to cvs.
6411 * Makefile.in, configure.in: removed traces of namesubdir,
6412 -subdirs, $(subdir), $(unsubdir), some rcs triggers. Forced
6413 copyrights to '92, changed some from Cygnus to FSF.
6415 * configure.texi: remove most references to multiple hosts,
6416 multiple targets, subdirs, etc.
6418 * configure.man: removed rcsid. reference config.sub not
6421 * Makefile.in: mkdir $(infodir) on install-info.
6423 Wed Feb 19 15:41:13 1992 John Gilmore (gnu at cygnus.com)
6425 * configure.texi: Explain better about .gdbinit and about
6426 the environment that configure.in sections run in.
6428 Fri Feb 7 07:55:00 1992 John Gilmore (gnu at cygnus.com)
6430 * configure.in: Ultrix is only a decstation if it's a MIPS.
6432 Fri Jan 31 21:54:51 1992 John Gilmore (gnu at cygnus.com)
6434 * README: DOC.configure => cfg-paper.texi.
6436 Fri Jan 31 21:48:18 1992 Stu Grossman (grossman at cygnus.com)
6438 * config.sub (near case $os): Don't convert newsos* to bsd!
6440 Fri Jan 31 02:27:32 1992 John Gilmore (gnu at cygnus.com)
6442 * Makefile.in: Reinstall change from gdb-4.3 that reduces
6443 the number of copies of COPYING that go into the GDB tar file.
6445 Thu Jan 30 16:17:30 1992 Stu Grossman (grossman at cygnus.com)
6447 * bfd/configure.in, config/mh-sco, gdb/config/mh-i386sco,
6448 gdb/config/mt-i386v32, gdb/configure.in, readline/configure.in:
6449 Fix SCO configuration stuff.
6451 Tue Jan 28 23:51:07 1992 Per Bothner (bothner at cygnus.com)
6453 * Makefile.in: For libg++, make sure the -I pointing
6454 to the gcc directory goes *after* all the libg++-local -I flags.
6455 Also, move just-gcc dependency from just-libg++ to all-libg++.
6457 Tue Jan 28 12:56:24 1992 Stu Grossman (grossman at cygnus.com)
6459 * configure: Change -x to -f to keep Ultrix /bin/test happy.
6461 Sat Jan 18 17:45:11 1992 Stu Grossman (grossman at cygnus.com)
6463 * Makefile.in (make-gdb.tar.Z): Remove texinfo targets.
6465 Sat Jan 18 17:03:21 1992 Fred Fish (fnf at cygnus.com)
6467 * config.sub: Add stratus configuration frags. Also
6470 Sat Jan 18 15:35:29 1992 Stu Grossman (grossman at cygnus.com)
6472 * Makefile.in (DEV_SUPPORT): add configure.man.
6474 * config.sub(Decode manufacturer-specific): add -none*.
6476 Fri Jan 17 17:58:05 1992 Stu Grossman (grossman at cygnus.com)
6478 * Makefile.in: remove form feeds to make Sun's make happy.
6479 (DEVO_SUPPORT): DOC.configure => cfg-paper.texi.
6481 Sat Jan 4 16:11:44 1992 John Gilmore (gnu at cygnus.com)
6483 * Makefile.in (AR_FLAGS): Make quieter.
6485 Thu Jan 2 22:57:12 1992 John Gilmore (gnu at cygnus.com)
6487 * configure.in: Add libg++.
6488 * configure: When verbose, don't output the command line at each
6489 level; it will be unremarkably the same as the previous version,
6490 which will be the same as what the user typed.
6492 Fri Dec 27 16:26:47 1991 K. Richard Pixley (rich at cygnus.com)
6494 * configure.in, Makefile.in: fix clean-info, add flex. add
6497 * configure: be less sensitive to spaces in Makefile.in. Do not
6498 look for sources in "..". Doing so breaks subdirectories that
6499 might have their own configure. If a subdir has it's own
6500 configure script, use it.
6502 Thu Dec 26 16:30:26 1991 K. Richard Pixley (rich at cygnus.com)
6504 * cfg-paper.texi: some changes suggested by rms.
6506 Thu Dec 26 10:13:36 1991 Fred Fish (fnf at cygnus.com)
6508 * config.sub: Merge in some small additions from the FSF version,
6509 taken from the gcc distribution, to bring the Cygnus and FSF
6510 versions into closer sync.
6512 Fri Dec 20 11:34:18 1991 Fred Fish (fnf at cygnus.com)
6514 * configure.in: Changed svr4 references to sysv4.
6516 Thu Dec 19 15:54:29 1991 K. Richard Pixley (rich at cygnus.com)
6518 * configure: added -V for version number option.
6520 Wed Dec 18 15:39:34 1991 K. Richard Pixley (rich at cygnus.com)
6522 * DOC.configure, cfg-paper.texi: revised, updated, and texinfo'd.
6523 renamed from DOC.configure to cfg-paper.texi.
6525 Mon Dec 16 23:05:19 1991 K. Richard Pixley (rich at rtl.cygnus.com)
6527 * configure, config.subr, config.sub: config.subr is now
6530 Fri Dec 13 01:17:06 1991 K. Richard Pixley (rich at cygnus.com)
6532 * configure.texi: new file, in progress.
6534 * Makefile.in: build info file and install the man page for
6537 * configure.man: new file, first cut.
6539 * configure: find config.subr again now that configuration "none"
6540 has gone. removed all traces of the -ansi option. removed all
6541 traces of the -languages option.
6543 * config.subr: resync from rms.
6545 Wed Dec 11 22:25:20 1991 K. Richard Pixley (rich at rtl.cygnus.com)
6547 * configure, config.sub, config.subr: merge config.sub into
6548 config.subr, call the result config.subr, remove config.sub, use
6551 * Makefile.in: revised install for dir.info.
6553 Tue Dec 10 00:04:35 1991 K. Richard Pixley (rich at rtl.cygnus.com)
6555 * configure.in: add decstation host makefile frag.
6557 * Makefile.in: BISON now bison -y again. also install-gcc on
6558 install. clean-gdbm on clean. infodir belongs in datadir.
6559 Make directories for info install. Build dir.info here then
6562 Mon Dec 9 16:48:33 1991 K. Richard Pixley (rich at rtl.cygnus.com)
6564 * Makefile.in: fix for bad directory tests.
6566 Sat Dec 7 00:17:01 1991 K. Richard Pixley (rich at rtl.cygnus.com)
6568 * configure: \{1,2\} appears to be a sysv'ism. Use a different
6569 regexp. -srcdir relative was being handled incorrectly.
6571 * Makefile.in: unwrapped some for loops so that parallel makes
6572 work again and so one can focus one's attention on a particular
6575 Fri Dec 6 00:22:08 1991 K. Richard Pixley (rich at rtl.cygnus.com)
6577 * configure: added PWD as a stand in for `pwd` (for speed). use
6578 elif wherever possible. make -srcdir work without -objdir.
6579 -objdir= commented out.
6581 Thu Dec 5 22:46:52 1991 K. Richard Pixley (rich at rtl.cygnus.com)
6583 * configure: +options become --options. -subdirs commented out.
6584 added -host, -datadir. Renamed -destdir to -prefix. Comment in
6585 Makefile now at top of generated Makefile. Removed cvs log
6586 entries. added -srcdir. create .gdbinit only if there is one
6589 * Makefile.in: idestdir and ddestdir go away. Added copyrights
6590 and shift gpl to v2. Added ChangeLog if it didn't exist. docdir
6591 and mandir now keyed off datadir by default.
6593 Fri Nov 22 07:38:11 1991 K. Richard Pixley (rich at rtl.cygnus.com)
6595 * Freshly created ChangeLog.
6602 version-control: never