3 Make it possible to build a cross gprof, although a few cases are
5 * configure.in: Don't set MY_TARGET.
6 * gprof.h: Don't include MACHINE_H. Don't define FOPEN_RB or
7 FOPEN_WB; just get them from sysdep.h.
8 * core.h (min_insn_size, offset_to_code): Declare.
9 * core.c (MIN_INSN_SIZE): Don't define.
10 (min_insn_size, offset_to_code): New variables.
11 (core_init): Initialize min_insn_size and offset_to_code.
12 (find_call): New function.
13 (core_create_line_syms): Don't use min_dist. Set is_static in
15 * hist.c (UNITS_TO_CODE): Define.
16 * gprof.c (default_excluded_list): Add "__mcount_internal".
17 * gmon.h: Change TARGET_alpha to __alpha__.
18 * hertz.h: Ifdef MACH, define hertz as HZ.
19 * alpha.c (alpha_Instruction): Rename from Instruction. Change
21 (alpha_find_call): Rename from find_call.
23 * dummy.c, dummy.h: Remove.
24 * i386.c (i386_iscall): Rename from iscall. Change all
25 references. Check for call instruction, not jump or lcall.
26 (i386_find_call): Rename from find_call. Correct for VMA.
27 Correct call destination computation. Don't dereference symbol if
30 * ns532.c, ns532.h: Remove.
31 * sparc.c (CALL): Define.
32 (sparc_find_call): Rename from find_call.
34 * tahoe.c: Include cg_arcs.h, core.h, hist.h, and symtab.h. Don't
37 (enum tahoe_opermodes, tahoe_operandenum): Define. Rename all
38 references to opermodes or operandenum to these.
39 (tahoe_operandmode): Rename from operandmode. Call abort if
40 switch does not return.
41 (tahoe_operandname): Rename from operandname. Call abort if
42 switch does not return.
43 (tahoe_operandlength): Rename from operandlength. Call abort if
44 switch does not return.
45 (tahoe_reladdr): Rename from reladdr.
46 (tahoe_find_call): Rename from find_call. Use core_text_space
47 rather than textspace.
49 * vax.c (CALLS, PC): Define.
50 (enum opermodes, operandenum, struct modebyte): Define.
51 (vax_operandmode): Rename from operandmode. Call abort if switch
53 (vax_operandname): Rename from operandname. Call abort if switch
55 (vax_operandlength): Rename from operandlength. Call abort if
56 switch does not return.
57 (vax_reladdr): Rename from reladdr.
58 (vax_find_call): Rename from find_call.
60 * Makefile.am (AUTOMAKE_OPTIONS): Set to cygnus.
62 (INCLUDES): Remove -DTARGET_$(MY_TARGET) and -DMACHINE_H=
64 (gprof_SOURCES): Add i386.c, alpha.c, vax.c, tahoe.c, sparc.c.
65 (gprof_DEPENDENCIES): Remove $(MY_TARGET).o.
66 (gprof_LDADD): Likewise.
67 (noinst_HEADERS): Remove alpha.h, i386.h, ns532.h, sparc.h,
68 tahoe.h, vax.h, dummy.h.
69 (EXTRA_DIST): Remove alpha.c, i386.c, ns532.c, sparc.c, tahoe.c,
71 ($(OBJECTS)): Don't depend upon $(MY_TARGET).h.
72 ($(MY_TARGET).o): Remove target.
73 (i386.o, alpha.o, vax.o, tahoe.o, sparc.o): New targets.
74 * configure, Makefile.in, aclocal.m4: Rebuild.
78 * core.c (core_sym_class): Treat weak symbols as text symbols.
83 * aclocal.m4: Rebuild with new libtool.
84 * Makefile.in: Rebuild with current automake.
89 * configure.in: Change version number to 2.8.2. Call
90 AM_PROG_LIBTOOL. Remove shared library handling; now handled by
91 libtool. Add AM_CONFIG_HEADER. Change AC_PROG_INSTALL to
92 AM_PROG_INSTALL. Add AM_EXEEXT.
93 * Makefile.am (LINK): Remove.
94 (gprof_LDFLAGS): Remove
95 (gprof_DEPENDENCIES): Change libbfd.a to libbfd.la.
96 (gprof_LDADD): Likewise.
97 ($(OBJECTS)): Depend upon gconfig.h and ../bfd/config.h.
98 * gprof.h: Undefine PACKAGE and VERSION after including BFD
99 sysdep.h file, then include new gconfig.h file.
100 * gprof.c (VERSION): Don't define.
101 * acconfig.h: New file.
102 * stamp-h.in: New file.
103 * gconfig.in: New file, created by autoheader.
104 * Makefile.in, configure, aclocal.m4: Rebuild.
108 * aclocal.m4, configure, Makefile.in: Rebuild with automake 1.2.
112 * Makefile.am (INCLUDES): Add -DDEBUG.
113 * Makefile.in: Rebuild.
117 Change to use automake:
118 * Makefile.am: New file.
119 * configure.in: Run AM_INIT_AUTOMAKE, AM_MAINTAINER_MODE, and
121 * aclocal.m4: New file, created by aclocal.
122 * Makefile.in: Replace with file created by automake --cygnus.
123 * configure: Rebuild.
127 * gprof.c (VERSION): Define as "2.8.1".
129 * Branched binutils 2.8.
133 * gprof.c (main): Correct copyright message.
137 * Makefile.in (.c.o): Define TARGET_$(MY_TARGET) when compiling.
138 * gmon.h: Use bytes counts rather than sizeof in struct raw_phdr
143 * cg_arcs.c (arc_add): memset() newly alloced arc to ensure
144 all fields are initialized with 0.
148 * symtab.h (find_call): Declare.
149 * cg_arcs.c (cg_assemble): Don't declare find_call.
150 * hist.c (scale_and_align_entries): Declare.
154 * configure.in: Define BSD44_FORMAT if the target looks like a
155 BSD4.4 derived system.
156 * configure: Rebuild.
157 * Makefile.in (.c.o): Add @DEFS@.
158 * gmon_io.c (gmon_out_read): In BSD44_FORMAT code, get profrate
159 from profrate field, not version field.
163 * dummy.c (find_call): Clear ignore_direct_calls.
167 * Makefile.in (.c.o): Add -D_GNU_SOURCE. Put $(CFLAGS) at the
169 (gprof): Put $(CFLAGS) after the other options.
173 * configure: Rebuild with autoconf 2.12.
177 * sparc.c (find_call): Align p_lowpc to avoid bus error.
181 * gprof.c (usage): Print bug report address.
182 (main): Change version printing to match current GNU standards.
186 * gmon.h: Replace #elif with #else/#endif.
190 * configure.in (i[345]86-*-*): Recognize i686 for pentium pro.
191 * configure: Regenerate.
195 * configure.in: Set and substitute HLDENV.
196 * configure: Rebuild.
197 * Makefile.in (HLDENV): New variable.
198 (gprof): Use $(HLDENV).
202 * core.c (read_function_mappings): Cast xmalloc return.
206 * gprof.c (VERSION): Define as "2.7.1".
208 * Released binutils 2.7.
210 * bb_exit_func.c: Rename from __bb_exit_func.c, so that it can be
211 stored on a System V file system.
215 * configure.in: Call AC_ISC_POSIX.
216 * configure: Rebuild.
217 * Makefile.in (gprof): Pass $(CFLAGS) during link.
218 * hertz.c: Don't include <sys/time.h>; let sysdep.h handle that.
219 If HAVE_SETITIMER is not defined, try using sysconf.
223 * Makefile.in (exec_prefix, bindir, libdir, mandir, infodir, datadir,
224 INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
225 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
226 (AC_PROG_INSTALL): added.
227 * configure: Rebuilt.
231 * configure.in: On alpha*-*-osf*, link against libbfd.a if not
232 using shared libraries.
233 * configure: Rebuild with autoconf 2.10.
237 * core.c (core_create_line_syms): Use xstrdup rather than strdup.
238 * source.c (source_file_lookup_path): Likewise.
242 * configure.in: Permit --enable-shared to specify a list of
244 * configure: Rebuild.
248 * core.c (core_create_function_syms): Move filename and func_name
249 inside ifdef where they are used.
251 * core.c (core_sym_class): Parenthesize && within ||.
252 * symtab.c (symtab_finalize): Correct parenthesization.
254 * cg_print.h (cg_print_file_ordering): Declare.
255 (cg_print_function_ordering): Declare.
257 * __bb_exit_func.c (__bb_exit_func): Replace bcopy with memcpy.
258 * cg_arcs.c (arc_add): Likewise.
259 * cg_print.c (cg_print_function_ordering): Likewise.
263 * gprof.c (default_excluded_list): Add "__mcount".
265 * gprof.c (main): Change ifdef __osf__ to __alpha__.
267 * gmon_io.c (gmon_out_read): If BSD44_FORMAT is defined, get the
268 profiling rate from the header.
270 * gmon.h (struct raw_phdr): Only include pad if both __alpha__ and
271 __osf__ are defined. Add new fields if BSD44_FORMAT is defined.
273 * alpha.h (MIN_INSN_SIZE): Define.
274 * core.c (MIN_INSN_SIZE): If not defined, define as 1.
275 (core_sym_class): Ignore debugging symbols.
276 (core_create_line_syms): Use MIN_INSN_SIZE when gathering line
281 * cg_print.c (cg_print_function_ordering): Fix __GNUC__ misspelled
283 (order_and_dump_functions_by_arcs): Likewise.
287 * configure: Rebuild with autoconf 2.8.
291 * configure.in: Check for 'do not mix' from native linker before
292 trying to use -rpath.
293 * configure: Rebuild.
297 * configure.in: Set HDLFLAGS for *-*-hpux with --enable-shared.
298 * configure: Rebuild.
302 * configure.in: Don't set CC. Look for --enable-shared. Set
303 BFDLIB and HLDFLAGS and substitute them.
304 * configure: Rebuild.
305 * Makefile.in (LIBS): Use @BFDLIB@.
306 (HLDFLAGS): New variable.
307 (gprof): Use $(HLDFLAGS).
311 Support for building bfd and opcodes as shared libraries, based on
313 * Makefile.in (LIBDEPS): New variable.
314 (LIBS): Use -L../bfd -lbfd.
315 (gprof): Depend upon $(LIBDEPS) rather than $(LIBS).
319 * gprof.c (long_options): Add "--function-ordering" and
320 "--file-ordering" options.
321 (usage): Add new options to usage message.
322 (main): Handle new options.
323 * gprof.h (STYLE_FUNCTION_ORDER): Define.
324 (STYLE_FILE_ORDER): Define.
325 (function_mapping_file): Declare.
326 * cg_arcs.c (arcs, numarcs): New globals.
327 (arc_add): Put new arcs into the arc array so the function/file
328 ordering code can examine them.
329 * cg_arcs.h (struct arc): New field "has_been_placed".
330 (arcs, numarcs): Declare new globals.
331 * core.c (symbol_map, symbol_map_count): New globals.
332 (read_function_mappings): New function to read in a function
334 (core_init): Call read_function_mappings if a function mapping
336 (core_create_function_syms): Handle function to object file
338 * symtab.h (struct sym): New fields "mapped", "has_been_placed",
340 * cg_print.c (cmp_arc_count): New function for sorting arcs.
341 (cmp_fun_nuses): Likewise for functions.
342 (cg_print_function_ordering): New function to print a suggested
344 (cg_print_file_ordering): Likewise for ordering .o files.
345 (order_and_dump_functions_by_arcs): Helper function for function
346 and object file ordering code.
350 * core.c (core_sym_class): Ignore symbols without BSF_FUNCTION
351 set if ignore_non_function is set.
352 * gprof.h (ignore_non_functions): Declare.
353 * gprof.c (ignore_non_functions): Define.
354 (long_options): Add "ignore-non-functions".
355 (usage): Add new options.
356 (main): Recognize "-D" and "--ignore-non-functions" option.
360 * Makefile.in (.m.c): Strip out directory name from function
363 * hist.c (scale_and_align_entries): Don't use DEFUN_VOID. Do
364 UNITS_TO_CODE adjustment unconditionally; compiler can optimize
365 away zero-offset case. Refer to scaled_addr, not aligned_addr.
367 * vax.c: Don't include vax.h here.
371 Version 2.6 released.
375 * gprof.c (main): Cast getenv return value.
379 * Makefile.in (TAGS): New target.
383 * Makefile.in (DISTSTUFF): Rename to GEN_FILES, to avoid confusion.
384 (all): Depend on $(GEN_FILES), not diststuff (which also depends
389 * sym_ids.c: Include <ctype.h>.
393 * Makefile.in (diststuff): Also make info.
394 (mostlyclean): Don't remove gprof.info*.
395 (maintainer-clean realclean): Also remove *.info*.
401 * Makefile.in: Add dependecies for $(OBJS) on header files.
403 * cg_print.c (print_cycle, print_members, cg_print_index): Fix new
404 style output format to make it consistent.
405 * dummy.c (find_call): Fix typo in error message.
409 * Makefile.in (maintainer-clean): New target, synonym for
414 * Makefile.in (install): Don't install in $(tooldir).
418 NS32K changes from Ian Dall:
419 * configure.in: Use ns32k, not ns532.
420 * ns532.c: Include symtab.h.
421 (find_call): Renamed from findcall. Print a message.
422 * ns532.h: Remove dummy.h comments.
426 * Makefile.in (install): Remove "brokensed" hack, unnecessary now
427 that we're using autoconf.
431 * core.c (get_src_info): Cast arg 7 of bfd_find_nearest_line
432 to proper type of "unsigned int *".
436 * configure.in: Use changequote around use of [].
440 * Makefile.in (distclean, realclean): Remove config.cache and
445 * Makefile.in (Makefile): Added config.status to dependency list.
446 (config.status): New target.
447 (SHELL): New definition.
451 * Makefile.in (install): Depend on "all".
455 * Makefile.in: Change all references to MY_MACHINE to MY_TARGET,
456 to match configure script.
460 * gen-c-prog.awk: Changed reference to "make-c-prog.awk" in
461 comment emitted by this script to gen-c-prog.awk.
463 * Makefile.in, configure.in: Converted to use autoconf.
464 * configure: New file, generated with autoconf 2.3.
465 * config/{mt-alpha, mt-dummy, mt-i386, mt-ns532, mt-sparc,
466 mt-tahoe, mt-vax}: Removed.
470 * __bb_exit_func.c: New file, from David Mosberger-Tang.
474 * All *.c: More cleanup towards GNU format.
476 * gmon_out.h (struct gmon_hist_hdr, struct gmon_cg_arc_record):
477 replaced sizeof (bfd_vma) by size (char*) because Ken tells me
478 that bfd_vma is only guaranteed to be at least as big as a pointer.
480 (GMON_Record_tag): added explicit enumeration values to ensure
481 compatibility across compilers.
483 * gmon_io.c (get_vma, put_vma): replaced sizeof(bfd_vma) by
488 * All *.c and *.h files: Ran "indent -gnu". Cleaned up a couple
489 of constructs GNU indent couldn't handle. Block comments not yet
490 rewritten in GNU format.
492 * gprof.c (VERSION): Changed to 2.6, to get in sync for next
497 * symtab.c (symtab_finalize): ensure globals symbols really
498 are favored over static ones---even if their name looks less
499 preferable; this is important for HP-UX; for example, there
500 is a static label Ltext_something that aliases the global
503 * hist.c (hist_print): auto-scaling is now in effect for FSF-style
504 output only; also, auto-scaling is now performed based on
505 per-call, rather than total execution time, which is what it was
508 * gprof.h (File_Format): new type.
510 * gprof.c (VERSION): upped to 2.7---seems to be completely out of
511 sync with Cygnus version numbers though...
513 (long_options): renamed --gmon-info to --file-info, --width added,
514 renamed --old-file-format to --file-format
515 (main): dito; also added support to read prof files, but as
516 mon_out_read() is not implemented, it's #ifdef'd out for now
518 (usage): update to reflect new options.
520 * gmon_io.c: replaced "old_file_format" by more general
523 * gmon.h (struct raw_phdr): fixed declaration for OSF/1.
525 * core.c (core_sym_class): added back check for __gnu_compiled and
526 ___gnu_compiled for the benefit of systems without
527 bfd_find_nearest_line() support
529 (get_src_info): now the libbfd is fixed, invoke bfd_find_nearest_line()
530 with section-relative addresses
532 (core_create_function_syms): get_src_info() calls are currently
533 enabled for OSF/1 only. It appears to work allright for SunOS
534 4.1.x as well, but on SPARCs it gets painfully slow with the
535 current implementation of aout_32_find_nearest_line();
536 unfortunately, this means that static functions will not have their
537 filename printed in the call-graph function index; line-level
538 profiling should still work, but requires some patience
540 * cg_print.c (cg_print_index): sanitised printing of index when
541 using FSF-style output; in particular, output width is now controlled
542 via option --width and the function tries hard to keep columns
543 aligned even in the presence of (occasional) long names
545 * NOTES: a first shot at updating the documentation.
549 * core.c (core_create_function_syms): fixed computation of min_vma
552 * *.c: removed rcsid.
556 * Lots of changes from David Mosberger-Tang:
560 * gprof.c (main): put parentheses around & within &&.
562 * basic_blocks.c (bb_read_rec): print warning message (once) when
563 ignoring basic-block execution counts.
565 * source.c (source_file_lookup_name): corrected second argument to
568 * hist.c (print_header): merged Fri Oct 21 18:58:02 1994 change by
571 * gmon_io.c (gmon_out_read): the output stule STYLE_GMON_INFO is now
572 supported both for old and new (versioned) gmon.out files. Old
573 files are identified as version 0.
575 * gmon.h (struct raw_arc): count field is now sizeof(long) bytes
576 long (instead of 4) because that is what OSF/1 v3.0 uses.
578 * core.c: minor fixes and debugging info changes.
582 * core.c (core_init): if .text cannot be found, try $CODE$ (the
583 name of the text-section under HP-UX).
585 * hist.c (hist_assign_samples): fixed off-by-one bug: highpc
586 points one past the last sampling bin, so hist_scale should be
587 computed as "hist_scale /= hist_num_bins", not "hist_scale /=
590 * gmon_io.c, hist.c, hist.h: renamed hist_num_samples to
593 * configure.in: added alpha-*-*) for per-target config.
595 * alpha.c, alpha.h: created.
597 * gprof.c (default_excluded_list): <locore>, <hicore> added.
599 * core.c (core_create_function_syms, core_create_line_syms):
600 explicitly keep two sentinels "<locore>" and "<hicore>" that catch
601 all addresses outside the text-space. Thus, sym_lookup(&symtab,
602 addr) continues to guarantee not to return 0 on any address. It
603 also avoids incorrectly crediting the first/last symbol in the
606 * core.c (core_create_line_syms): always create function symbols
607 first, then merge in line symbols; this is so that if parts of the
608 program were compiled without -g, function-level symbols are
611 * utils.c (print_name_only): support for print_path added.
613 * symtab.c (cmp_addr): also use is_func flag in comparison.
614 (symtab_finalize): return immediately when table empty; now
615 more careful about getting rid of the right duplicate symbol.
617 * sparc.c (find_call): many fixes---this function was rather
618 botched in binutils-2.4 already; it should work again.
620 * source.c (source_file_lookup_path): PATH is now strdup'ed (it is
621 not good to rely on get_src_info() to return distinct string
624 * search_list.c (search_list_append): added cast for xmalloc().
626 * hist.c: added explicit initialization to some of the global
627 variables; fixed SItab (scales were off by a factor of 10).
629 * hist.h: include of bfd.h added.
631 * gprof.c, gprof.h (print_path): added.
633 * gprof.h (MAX): fixed.
635 * gmon_out.h: renamed gmon_time_hist_hdr to gmon_hist_hdr.
637 * gmon_io.c: added some casts to (long) so we can always print as %lx
639 * core.c (core_get_text_space): fixed to make it work.
641 * cg_print.c (cg_print_index): added support for print_path option.
643 * cg_dfn.h (cg_dfn): wrap prototype in PARAMS().
645 * call_graph.c, gmon_io.c, hist.c: avoid taking address of array
646 as some compilers complain (e.g., DEC's OSF/1 compiler)
648 * basic_blocks.c, gmon_io.c, hist.c, source.c, sym_ids.c,
649 symtab.c: calls to memset() had 2nd and 3rd args reversed.
653 * gprof.c: added "_mcount" to default_excluded_list.
654 (main): if output_style==0 and there is either a histogram or a
655 call-graph, always generate flat and call-graph, no matter what
656 line_granularity is set to.
658 * source.c (source_file_lookup_name): if searching for sf->name
659 fails, try again with filename obtained after stripping off any
660 partial path from sf->name.
662 * gprof.h (SRCDEBUG): added.
664 * search_list.c (search_list_append): directories were added in wrong
667 * reimplemented selection mechanism from ground up; it is now possible
668 to accurately control what gets included/excluded in each of the
669 output styles; a "symbol-specification" (spec) is the basic means
670 to select a set of symbols; a spec has the syntax:
672 spec == (FILENAME:(FUNCNAME|LINE_NUM) | NAME).
675 any of the terminal symbols can be empty, in which case they
676 match anything (wildcards). NAME is interpreted as a FILENAME
677 if it contains a dot (e.g., foo.c), as LINE_NUM if it starts
678 with a digit, and as FUNCNAME otherwise.
680 For example, to get a call-graph display that ignores arcs
681 from foo() to bar(), you'd say "--no-graph=foo/bar"; to
682 show only arcs into bar() (no matter what the caller),
683 you'd say "--graph=/bar"; and to get a call-graph without
684 any arc info, you'd say "--graph=/"; similarly, to
685 get a flat profile without mcount, you'd say "--no-flat=mcount"
686 and to get a flat profile that shows includes all functions
687 you'd say "--flat=""" (i.e., an empty spec)
689 * hist.c (hist_print): top_time wasn't initialized to 0.0.
693 * gmon_out.h: all headers now declared in terms of characters
694 to avoid getting into trouble with different compilers introducing
695 different amount of padding; the code already accessed the fields
696 through bfd functions, so that didn't have to change.
698 * hist.c (hist_read_rec, hist_write_rec): added support for
699 collection pc histograms measuring quantities other than time;
700 the histogram header now includes a field that specifies the
701 dimension of the quantity measured by the histogram bins
702 (normally, this is "seconds", but other meaningful dimensions
703 include such things as "I-cache misses", "instruction issue stalls"
704 etc.); there is also a field to specify a one-character
705 abbreviation for the dimension; in the case of time, this would
706 be 's'; in most other cases it probably would be '1' (not a physical
711 * gprof.c, gmon_io.[ch]: BSD_COMPATIBLE is gone and new_file_version
712 has become old_file_version; gmon_io.c now always supports old-style
713 gmon.out files; it first tries to read gmon.out as a new version
714 file, if that fails, it tries to read it in the old format;
715 although not very likely, it is possible for gprof to mistake an
716 old-style file as a new one (the first 4 bytes would have to
717 be "gmon"---including the trailing '\0'); in that case, it is
718 necessary to specify --old-file-version
720 * gprof.h: removed dependency on SYSV; the code now always uses
721 strrchr(), memset(), and memcpy() and does not include either
722 of string.h or strings.h; this should make gprof compile on
723 any (Unix) system without configuration (per suggestion of
726 * gprof.c (usage): fixed location of --new-file-format option.
728 * cg_arcs.c (propagate_flags): fixed typo in declaration.
730 * flat_bl.m: removed formfeed at end of file; the form-feed
731 is now printed cg_print.c only when necessary.
733 * major rewrite of gprof---too many changes to mention all of
736 + -l now requests profiling at the line level (as opposed
737 to function level); in this mode, gprof creates a "symbol"
738 (aka name-list entry) for each line of source code, instead
741 + support for a new gmon.out file format; the new format
742 consists of a header with a magic and a version number,
743 followed by a sequence of profile data; profile data
744 can any of: (a) PC histogram, (b) call-graph arcs, or
745 (c) basic-block execution counts; the version number makes
746 it possible to extend gmon.out in a backwards compatible
749 + support for tcov style annotated output: if the gmon.out file
750 contains basic-block execution counts, the user can request
751 the generation of annotated source files, much like Sun's
756 + new scheme to suppress symbols that aren't function names
757 (e.g., avoids mistaking a goto label as a function)
759 + reorganized source code to make it more managable; as a
760 side effect, gprof now compiles cleanly with "gcc -Wall"
764 * gprof.c (funcsymbol): bfd_find_nearest_line() is now used as a
765 final cross-check to determine whether a static symbol should be
766 considered as a function-name.
770 * gmon_io.c (gmon_out_read): recognize "-" as the filename for
771 stdin; this is useful if you wanna keep gmon.out files compressed;
772 this way you can "gzcat" the compressed file into gprof.
774 * gprof.c: flag_min_count now initialized with 1 instead of 0.
776 * basic_blocks.c (bb_annotate_source): added support for creating
777 .tcov files when option flag_annotate_make_files is TRUE.
778 (annotate_with_count): all counts less than the minimum count
779 specified by -m are now annotated with hash-marks.
781 * gprof.c (main): -A is now followed by a string of option chars.
783 * basic_blocks.c (annotate_with_count): replaced b->count with
786 * source.c: flag_annotate_source replaced by source_lock_map.
788 * source.h: source_lock_map added.
790 * gprof.c (main): new command-line syntax: -S simply specifies
791 which source-files user is interested in; -A requests annotated
792 source files and -AA requests that all lines in a source file
797 * basic_blocks.c (PATH_MAX): if undefined, define as 1024.
799 * sparc.c, i386.c, tahoe.c, vax.c: added include of "time_hist.h"
800 so s_lowpc etc. get declared.
802 * arcs.h (doarcs): created.
804 * arcs.c: reordered static functions such that they get defined
807 * gprof.c (main): added options:
808 -A: request annotation of all source lines (with -S)
809 -m: minimum execution count (with default basic-block display)
810 -N: force new file format (only if BSD_COMPATIBLE is defined)
811 -S: annotate source file
812 -t: set table length (with -S)
814 * Makefile (OBJS): added basic_blocks.o call_graph.o gmon_io.o
819 * gprof.c (asgnsamples): computation of "pcl" and "pch" depended
820 on the fact being able to store a long in a double without loss of
821 precision; this does not hold on machines with 64 bit longs and 64
826 * printgprof.c (flatprofheader): Always set totime to 1.0 if not
827 greater than 0.0. Suggested by Harold Assink
832 * printgprof.c (printprof): Use free, not cfree.
833 (printgprof, printindex): Ditto.
837 * gprof.h (kfromlist, ktolist, flist, Flist, elist, Elist): Make
838 decls extern to keep native HP compiler quiet.
842 * gprof.c (funcsymbol): Ignore ___gnu_compiled as well as
843 __gnu_compiled, for the benefit of systems which add a leading
848 * configure.in: Change i386-*-* to i[345]86-*-*.
852 * ns532.c, ns532.h: New Files. ns532 support.
854 * config/mt-ns532: New File. ns532 support.
856 * gprof.c: user register int i instead of defaulting the int.
857 Allows compilation with -Dregister= for debugging.
859 * configure.in: Add ns532 support.
863 * Makefile.in (gprof): Depend on $(LIBS).
867 From binutils-2.4 release:
871 * configure.bat: [new] build makefile from makefile.in (dos)
872 * hertz.c: allow static HERTZ (msdos needs it)
873 * gprof.c: allow target to select "r" or "rb" for fopen
874 * gprof.c: ignore __gnu_compiled symbols
875 * i386.h: dfine FOPEN_RB to "rb" for dos.
879 * Makefile.in (.m.c:): Added .SUFFIXES : .m
880 so flat_bl.c would make from flat_bl.m file.
884 * Makefile.in (install-info): Check for gprof.info in build dir,
885 fall back to srcdir. Depend on it.
887 * gprof.h (TRUE, FALSE): Always use undef before defining them.
891 * Makefile.in (MY_MACHINE): Renamed from MACHINE to avoid losing
892 makes (osf1) in which the value of MACHINE can not be changed.
893 * config/*.mt: Changed appropriately.
897 * gprof.c (getsymtab): Change nosyms to long. Rename
898 get_symtab_upper_bound to bfd_get_symtab_upper_bound. Check for
899 errors from bfd_get_symtab_upper_bound and
900 bfd_canonicalize_symtab.
904 * gprof.c (funcsymbol): Use bfd_get_symbol_info instead of
909 * Makefile.in: Avoid bug in hpux sed.
913 * gprof.texi (Invoking): add text about -v flag
915 * gprof.1: add text about -v flag
919 * gprof.c (VERSION): defined a version macro, print the value
920 when the -v option is used
924 * Makefile.in: Install correctly.
928 * gprof.c (main): Get whoami from argv, instead of hardcoding.
929 Use it in usage message. Split usage message to fit in 80 cols.
933 * Makefile.in: Undo 15 June change.
937 * gmon.h, gprof.h: structs of chars used to hold external
939 * gprof.c (getpfile, openpfile, readsamples): Swap data in using
944 * Makefile.in (.c.o): Look in ../include, not ../bfd, for bfd.h.
946 Mon Jun 14 16:22:59 1993 david d `zoo' zuhn (zoo at rtl.cygnus.com)
948 * Makefile.in: remove parentdir support
952 * Makefile.in (INCLUDES): Add -I../bfd for sysdep.h and bfd.h.
953 * configure.in: No longer need to configure to get sysdep.h.
955 Tue May 18 21:44:11 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
957 * Makefile.in (install): should not depend on install-info
961 * gprof.h: Include ansidecl.h before sysdep.h. Undefine hz.
965 * M Makefile.in: Add -g to CFLAGS.
966 Ads LDFLAGS and use in place of CFLAGS where appropriate.
967 * configure.in: Make a sysdep.hlink in the same way other
968 bfd-based directories do.
969 * gprof.h (UNIT): Replace non-standard 'u_short' by 'unsigned
971 * gprof.h: #include sysdep.h instead of a bunch of stuff.
972 * gprof.c (main): Fix typo gproff->gprof.
974 Thu Mar 25 19:00:37 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
976 * gprof.texi: add INFO-DIR-ENTRY
978 Tue Mar 23 00:03:11 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
980 * Makefile.in: add installcheck target
984 * gprof.c (funcsymbol): Invert test for aflag.
988 * printgprof (xmalloc, xrealloc): Cast results of malloc
993 * Makefile.in: created info, install-info, dvi
995 Wed Jan 6 00:58:09 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
997 * Makefile.in: fix install rule for $(PROG)
1001 * gprof.1: updated SYNOPSIS to match actual behavior.
1005 * gen-c-prog.awk: New awk script, lightly changed from
1006 previously deleted make-c-prog.awk. Converts a text file
1007 to a c function that prints that text.
1008 * flat_bl.m, fsf_callg_bl.m, bsd_callg_bl.m: New files.
1009 Inputs to gen-c-prog.awk, containing text describing
1011 * blurbs.c: Removed. Use *_bl.c instead.
1012 * Makefile.in: Use gen-cprog.awk to generate *_bl.c files
1013 from *_bl.m files. Also, improve *clean rules.
1014 * printgprof.c (printgprof): Usw new function names from *_bl.c.
1019 * gprof.h, gprof.c, printfgprof.c: Add support for two
1020 output styles: The default is similar to the old FSF gprof,
1021 while -T sets the variable bsd_style_output, which causes
1022 output matching Berkeley's gprof. The biggest differences
1023 are that with the FSF style output, the flat profile comes
1024 before the call graph; numbers come before explanations;
1025 and there is less gratuitous white space.
1026 * gprof.h, gprof.c, printfgprof.c: New discard_underscores
1027 variable causes discarding of initial underscores when
1028 printing symbol names. It is set unless there is a "main"
1029 symbol (without an underscore).
1030 * printfgprof.c: New function printnameonly(), called
1031 by printname(). It handles stripping of initial '_',
1032 as well as C++ name-demangling.
1033 * gprof.callg, gprof.flat, make-c-prog.awk: Removed.
1034 It is just as convenient to edit blurbs.c directly.
1035 * Makefile.in: Removed rule for making blurbs.c.
1036 * blurbs.c: This is now a true source file (as opposed
1037 to being generated from gprof.callg and gprof.flat).
1038 Change style to use one long string literal, instead of
1039 one literal per output line. Add FSF-style blurb for call graph.
1043 * Makefile.in: always create installation directories.
1047 * Makefile.in: change ${MACHINE} to $(MACHINE).
1049 Sun Jul 19 17:34:01 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1051 * Makefile.in: removed installation of the now useless
1052 call.{flag,callg} files.
1054 * gprof.1: now uses the standard man macros instead of the new BSD
1057 Sun Jul 12 19:06:00 1992 John Gilmore (gnu at cygnus.com)
1059 * configure.in: Remove host section, expand target section.
1060 * config/mt-{tahoe,vax}: Add, to match existing support files.
1061 * config/tmake-*: Remove leftover crud.
1063 * blurbs.c: New file, created from gprof.flat and gprof.callg by
1064 * make-c-prog.awk: which processes text files into C programs.
1065 * printgprof.c (flatprofheader, gprofheader): Call new functions
1067 (printblurb): Remove.
1068 * Makefile.in: Infrastructure to build blurbs.
1069 * pathnames.h: has been removed. Gprof now has no filename
1073 Sat Jul 11 18:07:21 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1075 * Makefile.in: define man1dir and install the man page
1079 * Makefile.in: added dummy info and install-info targets
1081 Thu Jun 4 11:34:02 1992 Mark Eichin (eichin at cygnus.com)
1083 * lookup.c: fixed fencepost in nllookup and added dbg_nllookup for
1084 help in debugging the problem (with -DDEBUG)
1085 * gprof.c: symbol values are now real values, don't add the vma
1086 anymore. (done for solaris; should verify this on other platforms)
1087 * ChangeLog: created.