3 * configure.in: Remove Makefile in build, host and target modules
4 unless configure was run with --no-recursion.
9 * config.guess: Update to 2003-01-03 version.
10 * config.sub: Update to 2003-01-03 version.
14 * configure: Regenerate with proper autoconf 2.13.
18 * configure.in: Add AC_PREREQ for consistency.
19 * configure: Regenerate.
23 * configure.in (GDB_TK): Add tcl directories conditional on
24 gdb/gdbtk directory being present.
25 * configure: Regenerate.
29 * configure.in (LD): Improve test for gcc. Try to set LD to the ld used
30 by gcc if LD is not defined and we are not doing a Canadian Cross.
35 * src-release (ETC_SUPPORT): Add fdl.texi and texi2pod.pl.
39 * Makefile.in: Rebuilt.
40 * Makefile.def (target_modules) [libffi]: Allow installation.
44 * configure.in: Fix use of $program_transform_name.
45 * configure: Regenerated.
49 * configure.in (baseargs): Don't remove first configure argument.
50 * configure: Regenerated.
54 * Makefile.tpl (local-distclean): Don't remove...
55 (multilib.ts): ... this. Moved into...
56 (multilib.out): ... this. Don't use sub-make.
57 ($(BUILD_SUBDIR)/[+module+]/Makefile, [+module+]/Makefile,
58 $(TARGET_SUBDIR)/[+module+]/Makefile, gcc/Makefile): Moved into...
59 (configure-build-[+module+], configure-[+module+],
60 configure-target-[+module+], configure-gcc): ... these. Test
61 for Makefile existence. Drop config.status from dependencies.
62 * Makefile.in: Rebuilt.
63 * configure.in: Move gcc-version-trigger to the end of
64 ac_configure_args. Add comments to maybedep.tmp and
65 serdep.tmp. Introduce --disable-serial-configure. Remove
66 nonopt from baseargs, matching and removing corresponding
67 whitespace while at it.
72 * configure.in (host_configargs): Replace reference to
73 no-longer-defined buildopts with --build=${build_alias}.
78 * Makefile.tpl ($(NOTPARALLEL)): Move to the end. Bring uses of
79 program_transform_name to standard idiom.
80 (AUTOGEN, AUTOCONF): Define.
81 (Makefile.in): Use $(AUTOGEN).
82 (Makefile): Depend on config.status, and use autoconf-style rule to
83 build it. Move original commands to...
84 (config.status): ... this new target.
85 (configure): Add $(srcdir). Depend on config/acx.m4. Use
87 * Makefile.in: Rebuilt.
91 * Makefile.tpl: Fix dramatic bustage due to change in
92 program_transform_name.
93 * Makefile.in: Regenerate.
95 * configure.in: Remove unnecessary PATH setting.
96 * configure: Regnerate.
98 * configure.in: Don't default to unprefixed tools unless
99 the native tools will work.
100 * configure: Regenerate.
102 * configure.in: Convert to autoconf script. Blow away lots
103 of now-redundant Makefile fragments.
104 * configure: Generate using Autoconf.
105 * Makefile.tpl: Rewrite to reflect autoconfiscation.
106 * Makefile.in: Regenerate.
110 * configure: Remove unneeded 'export's. Make CC_FOR_TARGET,
111 CXX_FOR_TARGET, GCJ_FOR_TARGET substituted in configure.in only.
113 * ChangeLog: Move a couple of entries from here to winsup/cygwin,
118 * Makefile.tpl (multilib.out): Fix missing space.
119 * Makefile.in: Regenerate.
123 * Makefile.tpl: Use shared multilib.out. Use move-if-change for it.
124 Convert (cd foo; make) to (cd foo && make). Clean up multilib.out.
125 * Makefile.in: Regenerate.
126 * configure.in: Remove unnecessary leftovers.
130 * config/mt-aix43: Delete.
134 * configure.in (extra_ranlibflags_for_target): New variable.
135 (*-*-darwin): Add -c to ranlib commands.
136 * configure (tooldir): Handle extra_ranlibflags_for_target.
140 * COPYING.NEWLIB: Updated.
141 * COPYING.LIBGLOSS: Ditto.
145 * Makefile.tpl: Revert HJL's change.
146 * Makefile.in: Regenerated.
147 * configure.in: Put build_prefix before $(BUILD_SUBDIR) here, and
152 * Makefile.tpl, configure.in: Substitute libstdcxx_incdir.
153 * Makefile.in: Regenerate.
157 * Makefile.tpl: Add @build_prefix@ before $(BUILD_SUBDIR).
158 * Makefile.in: Regenerated.
160 * configure.in (build_prefix): New. Substitute.
164 * Makefile.tpl: Don't let real targets depend on phony targets.
165 * Makefile.in: Regenerate.
167 * Makefile.tpl (do-info): Depend on maybe-all-texinfo, not all-texinfo.
168 * Makefile.in: Regenerate.
172 * Makefile.tpl (all-gcc): Use 'make quickstrap' if there was a
173 previous 'make bootstrap'.
174 * Makefile.in: Regenerate.
178 * configure.in (noconfigdirs) [mmix-*-*]: Disable libgloss and gdb.
182 * Makefile.tpl (check-gcc-c++): Renamed from check-c++. Don't run
184 (check-c++): Just depend on it and check-target-libstdc++-v3.
185 * Makefile.in: Regenerate.
189 * configure.in, Makefile.tpl, Makefile.def: Remove tclX.
190 * Makefile.in: Regenerate.
194 * COPYING.NEWLIB: Update list of alternate Regent of California
195 licenses and discuss official revoking of advertising clause.
196 * COPYING.LIBGLOSS: Ditto.
200 * Makefile.tpl (configure-target-rda): Depend on $(ALL_GCC_C).
201 * Makefile.in: Rebuilt.
205 * configure: Fix bug put in by gremlins.
207 * Makefile.tpl: Substitute more autoconfily.
208 * configure: Substitute more autoconfily.
209 * Makefile.in: Regenerate.
213 * Makefile.tpl (all-sim): Depend on maybe-configure-gdb.
214 * Makefile.in (all-sim): Ditto.
218 * Makefile.tpl: Change configure dependencies to not have real
219 targets depend on phony targets.
223 * configure.in: Revert unintentional change.
225 * src-release: Configure host subdirs.
227 * Makefile.tpl: Change dependency for */multilib.out so that
228 it works when gcc isn't in the tree.
230 * configure.in: Substitute more.
231 * configure: Run subconfigures from the Makefile.
232 * Makefile.tpl: Run subconfigures from the Makefile; add a few
233 convenience targets. Make sure gcc isn't rebuilt after bootstrap.
237 * Makefile.tpl: Add targets for configuring host subdirs in Makefile,
238 and corresponding dependencies.
239 * Makefile.in: Regenerate.
241 * configure.in (host_tools): Order binutils, gas and ld for
242 convenience in running the testsuites.
244 * Makefile.tpl: Introduce rules to serialize subconfigure runs.
245 * Makefile.in: Regenerate.
246 * configure.in: Introduce rules to serialize subconfigure runs.
248 * configure.in: Introduce BASE_CC_FOR_TARGET.
249 * Makefile.tpl: Reorganize and comment. Introduce HOST_CONFIGARGS.
250 Realize configure-build-* targets. Realize configure-target-* targets.
251 * Makefile.in: Regenerate.
255 * configure: Move gcc_version_trigger stuff from here...
256 * configure.in: ...to here.
258 * configure.in: Separate subconfigure options added by this file from
259 options given by the user. Add machinery to put args for host
260 subconfigures into the Makefile.
262 * Makefile.tpl: Remove 'vault' targets.
263 * Makefile.tpl: Reorder and comment dependencies.
264 * Makefile.in: Regenerate.
268 * configure.in: Move host-specific darwin noconfigdirs into
269 the host-specific section.
273 * Makefile.tpl: Restore bkorb's style patch, accidentally lost
275 * Makefile.in: Regenerate.
277 (finishing slow-motion replay)
278 * configure: Remove skip-this-dir support.
279 * Makefile.tpl: Remove skip-this-dir support.
281 * Makefile.tpl: Remove leftover support for non-autoconfiscated
283 * Makefile.in: Regenerate.
285 * Makefile.tpl: Strip out useless setting of 'dir'.
286 * Makefile.in: Regenerate.
290 (finishing slow-motion replay)
291 * configure.in: Fix deeply stupid bug.
293 * configure.in: Introduce RAW_CXX_FOR_TARGET and simplify embedded
294 shell code in CXX_FOR_TARGET
295 * Makefile.def: Introduce raw_cxx.
296 * Makefile.tpl: Use raw_cxx to select between CXX_FOR_TARGET and
298 * Makefile.in: Regenerate.
302 (finishing slow-motion replay)
303 * Makefile.tpl: Remove unnecessary ifs.
304 * Makefile.in: Regenerate.
306 * Makefile.tpl: Implement soft dependency machinery. Maybe-ize
307 dependencies. Maybe-ize build-libiberty. Create dummy install
308 targets for 'no_install' modules.
309 * configure: Move GDB_TK substitution to configure.in. Move
310 build_modules stuff to configure.in.
311 * configure.in: Implement soft dependency machinery. Maybe-ize
312 GDB_TK, rearrange slightly. Move build_modules stuff from configure.
313 * Makefile.in: Regenerate.
317 (continuing slow-motion replay)
318 * Makefile.tpl: Make all-target, install-target behave similarly
319 to all, install (only hitting configured targets). Eliminate
320 unused macro defintions.
322 * Makefile.tpl: Add all-gcc: all-build-libiberty dependency when
325 * Makefile.tpl: Add all-gcc: all-libiberty dependency.
327 * ltcf-c.sh, ltcf-gcj.sh, Makefile.tpl: Correct BUILD/HOST confusion.
329 * configure.in: Produce lists of subdir targets we're actually
330 configuring. Remove references to "dosrel".
331 * Makefile.tpl: Let configure set which subdir targets are hit.
332 Remove install-cross; clean up install; remove ALL. Remove
333 references to "dosrel". Remove "EXTRA_TARGET_HOST" hackery.
334 Autogenerate host module targets. Remove empty dependency lines
335 and redundant dependency; rearrange slightly.
336 * Makefile.def: Add host-side libtermcap, utils.
338 * Makefile.in: Regenerate.
342 (Continuing slow-motion replay)
343 * Makefile.def: Add list of recursive targets to autogenerate.
345 * Makefile.tpl: Autogenerate do-* targets. Autogenerate *-target-*
346 targets. Autogenerate *-build-* targets.
347 * Makefile.in: Regenerate.
351 (Continuing slow-motion replay)
352 * configure: More autoconf-style substitutions.
353 * Makefile.tpl: More autoconf-style substitutions.
354 * Makefile.in: Regenerate.
358 (Continuing slow-motion replay)
359 * configure: Substitute more variables in a more autoconf-friendly
360 way. Simplify slightly.
361 * Makefile.tpl: Make more variables substitutable in an
362 autoconf-friendly way.
363 * Makefile.in: Regenerate.
367 (Continuing slow-motion replay)
368 * configure.in (v810*): Remove special setting of tools.
370 * configure: Add support for extra required flags for ar or nm.
371 * configure.in (aix4.3+): Use above support for target-specific
372 issues, rather than using config/mt-aix43.
376 (Starting slow-motion replay merge from gcc 3.4 b-i-b branch)
377 * configure: Remove 'removing', which doesn't work. Replace $subdir
378 with . everywhere. Replace $subdirs with ''. Replace $makesrcdir
379 with $srcdir. Reformat indentation. Substitute some variables
380 formerly hard-coded in the Makefile for build=host.
381 * Makefile.tpl: Autogenerate more; make more autoconf-friendly.
382 * Makefile.def: Autogenerate more.
383 * Makefile.in: Regenerate.
387 * Makefile.tpl: syntactic cleanup
391 * Makefile.def (host_modules): Add rda.
392 * Makefile.in: Regenerate.
393 * configure.in (target_tool): Add target-rda to list.
397 * Makefile.tpl (bootstrap): Add bubblestrap, quickstrap, cleanstrap,
398 and restrap targets to this rule.
399 * Makefile.in: Regenerate.
403 * configure.in (i[3456]86-*-linux*): Add check to disable
404 ${libgcj} for glibc1.
408 * configure.in: Add tic4x target.
412 * Makefile.tpl: Make SET_LIB_PATH substitution more autoconfy.
413 * Makefile.tpl: Make RPATH_ENVVAR substitution more autoconfy.
414 * configure.in: Make SET_LIB_PATH substitution more autoconfy.
415 * configure.in: Make RPATH_ENVVAR substitution more autoconfy.
416 * Makefile.in: Regenerate.
420 * Makefile.tpl: Eliminate reference to all-gui, all-libproc.
421 * Makefile.in: Regenerate.
423 * Makefile.def: Remove order dependency comments.
424 * Makefile.tpl: Add explicit install-install dependencies.
425 * Makefile.in: Regenerate.
427 * Makefile.tpl: Remove material now in src-release. (Finally!)
428 * Makefile.in: Regenerate.
430 * configure: Restore my original patch by syncing with gcc version.
432 * Bring following over from gcc:
436 * configure.in (s390*-*-linux*): Enable libgcj.
440 * Makefile.in: Regenerate. This really ought to fix things. :sigh:
444 * configure: Move stray lines back to where they belong.
448 * Makefile.tpl: Insert configure-target target, for src-release.
450 * configure: Finish reverting change which Andrew Cagney started
451 reverting. Should fix bustage.
453 * src-release (BINUTILS_SUPPORT_DIRS): Add cpu directory.
454 * src-release: New file. Contains material for making net
455 releases for gdb, binutils, et al., formerly in Makefile.in.
459 * cpu: New top level directory. Intended to hold input files for
460 CGEN which have FSF copyright assignment.
461 * Makefile.in (BINUTILS_SUPPORT_DIRS): Add cpu directory.
465 Revert below (note that src does not contain Makefile.tpl):
466 * Makefile.tpl: Make subsituted variables more autoconfy.
467 * Makefile.in: Regenerate.
471 * configure: Revert accidentally applied changes.
473 * Makefile.tpl: Make more autoconf-friendly.
474 * Makefile.in: Regenerate.
475 * configure: Make substitution more autoconf-like.
479 * configure.in (arm-*-coff, strongarm-*-coff, xscale-*-coff): Use a
480 single entry to handle all these.
481 (arm-*-elf, strongarm-*-elf, xscale-*-elf): Likewise. Also enable
482 libjava on arm-*-elf.
486 * configure.in (powerpc-*-darwin*): Don't configure BFD, TK, or the
487 things that depend on them.
491 * Makefile.tpl: Make subsituted variables more autoconfy.
492 * Makefile.in: Regenerate.
493 * configure: Make seds more autoconfy.
497 * Makefile.tpl: Rewrite substituted lines to look autoconfy.
498 * Makefile.in: Regenerate.
499 * configure.in: Rewrite sed statements to look autoconfy.
501 * Makefile.tpl: Autogenerate *-target-* lists, dependencies of
502 all-target-foo on configure-target-foo.
503 * Makefile.def: Ditto.
504 * Makefile.in: Rebuild.
508 * Makefile.def: New file.
509 * Makefile.tpl: New file.
510 * Makefile.in: Generate from Makefile.tpl with 'autogen Makefile.def'.
512 * configure.in: Minor rearrangement. Simplify tests.
516 * configure.in (with_headers): Skip copy if value is "yes".
517 (with_libs): Likewise.
521 * configure.in (*-*-netbsd*): Use noconfigdirs, not skipdirs.
522 * configure.in (sh*-*-pe*): Ditto.
523 * configure.in (mips*-*-pe*): Ditto.
524 * configure.in (*arm-wince-pe): Ditto.
526 * configure.in: Rearrange.
530 * Import these changes from the config master repository:
534 * config.sub: Add tic4x target.
538 * config.guess: Detect NSR-D machines for nsr-tandem-nsk.
543 * COPYING.NEWLIB: More updates.
547 * COPYING.NEWLIB: Update.
551 * texinfo/texinfo.tex: Import version 2002-06-04.06.
553 * config.guess: Import version 2002-08-23.
554 * config.sub: Import version 2002-08-22.
558 * Makefile.in (GCC_FOR_TARGET): Prepend STAGE_CC_WRAPPER.
559 * configure.in (CC_FOR_TARGET, GCJ_FOR_TARGET, CXX_FOR_TARGET,
560 CXX_FOR_TARGET_FOR_RECURSIVE_MAKE): Likewise.
564 * configure.in (hppa*-*-openbsd*): Treat like hppa*-*-*elf*.
568 * configure.in (mips*-*-linux*): Don't skip target-libffi.
572 * configure.in: Move generic linux case to end. Copy generic
573 linux noconfigdirs to mips*-*-linux* entry and new
574 powerpc64*-*-linux* entry. Add target-libffi for the latter.
578 * MAINTAINERS: Clarify on config.guess and config.sub, and add
579 one instance of them which was missed to the list to update.
583 * config.guess: Update to 2002-07-09 version.
584 * config.sub: Update to 2002-07-03 version.
588 * configure.in: Remove two redundant tests.
592 * configure.in (mips*-*-irix6*o32): Enable stabs.
596 * configure.in: Don't build grez.
597 * Makefile.in: Ditto.
599 * Makefile.in: Remove references to bsp, cygmon, libstub.
600 * configure.in: Ditto.
602 * configure.in: Remove leftover reference to gdbtest.
606 * configure.in (gxx_include_dir): Change to match versioned
607 C++ headers if --enable-version-specific-runtime-libs is used.
611 * ltcf-cxx.sh (hpux*): Modify to support ia64-*-hpux*.
615 * configure.in: Make --without-x work.
619 * contrib: New directory. Created to contain a copy of the
620 texi2pod.pl script so that it is in the same place as the version in
625 * configure.in: Rearrange target Makefile fragment collection.
627 * Makefile.in: Don't try to build gdbtest, tgas, ispell, inet, or
629 * configure.in: Ditto.
633 * Makefile.in: Eliminate 'apache' targets.
634 * configure.in: Eliminate 'apache' targets.
636 * configure.in: Eliminate redundant tests. Reorganize.
638 * Makefile.in: Eliminate last reference to LIBGCC1_TEST.
640 * config-ml.in: Eliminate references to Cygnus configure.
642 * Makefile.in: Eliminate references to building emacs.
646 * configure.in: Add support for ip2k.
650 * configure.in (host_tools): Remove cgen.
652 * Makefile.in (all-cgen): Remove; runs from its source directory.
653 (check-cgen, install-cgen, clean-cgen): Likewise.
654 (all-opcodes): No not depend on all-cgen.
659 * configure.in: Fix AIX configury bug.
663 * configure.in: Replace ${topsrcdir} with ${srcdir}.
665 * configure.in: Move definition of libstdcxx_flags right above
666 usage, rather than way earlier.
668 * configure.in: Pull definition of is_cross_compiler earlier.
670 * configure.in: Rearrange a little.
672 * configure.in: Remove references to librx.
673 * Makefile.in: Remove references to librx.
677 * configure.in: Eliminate ${gasdir} variable.
681 * configure.in: Add support for frv.
682 * config.sub: Add support for frv.
686 * Makefile.in (CFLAGS_FOR_TARGET): Add -O2.
690 * configure.in (vax-*-netbsd*): Re-enable gas.
694 * Makefile.in: Replace HOST_PREFIX, HOST_PREFIX_1 with BUILD_PREFIX,
695 BUILD_PREFIX_1, to correct nomenclature.
696 * configure: Likewise.
698 * Makefile.in: Eliminate version-specific references to tcl8.1, tk8.1.
699 * configure.in: Eliminate version-specific references to tcl8.1, tk8.1.
703 * config-ml.in: Propogate DESTDIR also.
707 * configure.in (vax-*-netbsd*): Don't build gas for this
712 * configure.in (noconfigdirs): Don't compile libiberty, libstdcxx
717 * config.sub: Add DLX target.
721 * config.guess: Update to 2002-05-22 version.
722 * config.sub: Likewise.
726 * Makefile.in: Allow for PWDCMD to override hardcoded pwd.
727 * config-ml.in: Likewise.
728 * configure: Likewise.
729 * configure.in: Likewise.
733 * configure.in: Simplify makefile fragment collection.
735 * configure.in: Remove code to build emacs.
737 * configure.in : Remove --srcdir argument from targargs and buildargs
738 (it's always overridden in the Makefile anyway). Rearrange a bit.
740 * configure: Move some logic to configure.in.
741 * configure.in: Move some logic from configure.
745 * COPYING.LIBGLOSS: New file.
749 * Makefile.in: Honour DESTDIR.
753 * configure.in (noconfigdirs): Don't disable libgcj on
754 sparc64-*-solaris* and sparcv9-*-solaris*.
758 * configure.in: Revert 2002-04-18's patch; fixed in libjava.
762 * configure.in (FLAGS_FOR_TARGET): Do not add
763 -B$$r/$(TARGET_SUBDIR)/newlib/ when compiling newlib natively
764 on i[3456]86-*-linux*.
768 * configure.in (noconfigdirs): Replace [ ] with test.
770 * configure.in (noconfigdirs): Do not add target-newlib if
771 target == i[3456]86-*-linux*, and host == target.
775 * config.guess: Updated to 2002-04-26's version.
776 * config.sub: Updated to 2002-04-26's version.
780 * configure.in: delete reference to absent file
782 * configure.in: replace '[' with 'test'
784 * configure.in: Eliminate references to gash.
785 * Makefile.in: Eliminate references to gash.
787 * configure.in: remove useless references to 'pic' makefile fragments.
789 * configure.in: (*-*-windows*) Finish removing.
791 * configure.in: Eliminate redundant test for libgui.
795 * configure.in (h8300*-*-rtems*): Disable libf2c and libgcj.
796 (sparc-*-elf*, sparc64-*-elf*): Disable libgcj.
800 * configure.in: remove references to dead files
804 * configure.in: Disallow configuring libgcj when it is already
805 installed and we're using Solaris 2.8 linker. Do enable libgcj on
806 Solaris 2.8 by default. For PR libgcj/6158.
810 * configure.in: Move default CC setting out of config/mh-* fragments
815 * configure.in: don't even try to configure or make a subdirectory
816 if there's no configure script for it.
820 * MAINTAINERS: Remove chill maintainers.
821 * Makefile.in (CHILLFLAGS): Remove.
823 (TARGET_CONFIGDIRS): Remove libchill.
824 (CHILL_FOR_TARGET): Remove.
825 (BASE_FLAGS_TO_PASS): Don't pass CHILLFLAGS, CHILL_FOR_TARGET, or
827 (CONFIGURE_TARGET_MODULES): Remove configure-target-libchill.
828 (CHECK_TARGET_MODULES): Likewise.
829 (INSTALL_TARGET_MODULES): Likewise.
830 (CLEAN_TARGET_MODULES): Likewise.
831 (configure-target-libchill): Remove.
832 (all-target-libchill): Remove.
833 * configure.in (target_libs): Remove target-libchill.
834 Do not compute CHILL_FOR_TARGET.
835 * libchill: Remove directory.
839 * Makefile.in, configure.in, configure: Sync with gcc, entries
844 * configure.in: Add FLAGS_FOR_TARGET to GCJ_FOR_TARGET.
845 Fixes PR libgcj/6068.
849 * configure.in (i*86-*-netbsdelf*): Don't disable libgcj.
853 * configure.in (alpha*-dec-osf*): Enable libgcj.
857 Fix for: PR bootstrap/3591, target/5676
858 * configure.in (mcore-pe): Disable the configuration of
859 libstdc++-v3 since exceptions are not supported.
863 * configure.in: Enable libgcj for xscale-elf target.
867 * configure.in (libstdcxx_flags): Don't add libstdc++-v3 flags for
869 (CXX_FOR_TARGET): Explain why -shared-libgcc here.
873 * configure.in (CXX_FOR_TARGET): Add -shared-libgcc for
874 libstdc++-v3 and libjava.
878 * gcc/Makefile.in: Removed libstdc++-v3 dependancy for libjava and
883 * config.guess: Updated to 2002-01-30's version.
884 * config.sub: Updated to 2002-02-01's version.
887 * configure.in: Added sh64-*-*.
891 * Makefile.in (all-fastjar): Also depend on all-libiberty.
892 (all-target-fastjar): Also depend on all-target-libiberty.
896 * configure, configure.in: Use temp file for long sed commands.
900 * configure.in (noconfigdirs) [h8300*-*-*, h8500-*-*]: Disable
905 * configure.in (noconfigdirs) [mmix-*-*]: Disable libgcj.
909 * configure.in (noconfigdirs) [cris-*-*]: Disable libgcj.
913 * configure: Handle temporary files securely using mkdir.
917 * configure.in (*-*-linux*): Disable configuration of target-newlib
922 * Makefile.in (EXTRA_TARGET_FLAGS): Pass RANLIB_FOR_TARGET for
927 * Makefile.in (check-c++): Add missing semicolon.
931 * configure.in (sh-*-linux*): New.
935 * configure.in (noconfigdirs): Don't compile libiberty, libstdcxx
936 and libgcj on m68hc11/m68hc12.
940 * Makefile (CFLAGS_FOR_BUILD): New.
941 (EXTRA_GCC_FLAGS): Add CFLAGS_FOR_BUILD.
945 * configure.in (libstdcxx_flags): Do not try to execute
946 libstdc++-v3/testsuite_flags until it exists.
950 * configure.in (libstdcxx_flags): Remove reference to libstdc++.INC.
954 * ltcf-cxx.sh: Add -nostdlib to IRIX 6 archive_cmds.
958 * configure.in: Move *-chorusos target case to the proper switch.
963 * Makefile.in (STAGE1_CFLAGS): Pass down.
967 * config.guess: Add hppa64-linux support. Note for next import that
968 this is already in the master file.
969 * configure.in: Likewise. Accept `parisc' alias for `hppa'.
973 * Makefile.in (DO_X): Do not backslash single-quotes in
974 backquotes (two places).
978 * Makefile.in (DO_X): Quote nested quotes.
982 * Makefile.in (DO_X): Use double quotes for quoting
987 * configure.in: Only use `lang_requires' for languages athat are
992 * configure.in: Allow config-lang.in to set `lang_requires' to list
993 of other required languages.
997 * Makefile.in: Remove RANLIB definition. Use RANLIB
998 in RANLIB_FOR_TARGET, EXTRA_HOST_FLAGS, EXTRA_TARGET_FLAGS,
999 EXTRA_GCC_FLAGS, $(DO_X) targets only when the RANLIB is set.
1004 * Makefile.in (check-c++): Use tabs, not spaces.
1008 * Makefile.in (check-c++): New rule.
1010 * configure.in (target_libs): Remove libg++.
1011 (noconfigdirs): Remove libg++.
1012 (noconfigdirs): Same.
1013 (noconfigdirs): Same.
1014 (noconfigdirs): Same.
1016 * config-ml.in: Remove libg++ references.
1018 * Makefile.in (TARGET_CONFIGDIRS): Remove libio, libstdc++, libg++.
1019 (ALL_TARGET_MODULES): Same.
1020 (configure-target-libg++): Remove.
1021 (all-target-libg++): Remove.
1022 (configure-target-libio): Remove.
1023 (all-target-libio): Remove.
1024 (check-target-libio): Remove.
1026 (libg++.tar.bz2): Remove.
1027 (all-target-cygmon): Remove libio.
1028 (all-target-libstdc++): Remove.
1029 (configure-target-libstdc++): Remove.
1030 (TARGET_LIB_PATH): Remove libstdc++.
1031 (ALL_GCC_CXX): Remove libstdc++.
1032 (all-target-gperf): Correct.
1036 * configure: Introduce GCJ_FOR_TARGET.
1037 * configure.in: Ditto.
1038 * Makefile.in: Ditto.
1042 * configure.in: for *-chorusos, don't config target-newlib and
1047 Remove V2 C++ library.
1048 * configure.in: Remove --enable-libstdcxx_v3 support.
1052 * configure.in (target_makefile_frag) [alpha*-*]: Use mt-alphaieee.
1056 * configure.in: Allow libgcj to be built on Sparc Solaris.
1060 * configure.in: Enable libgcj on several additional platforms.
1064 * configure.in: Enable libgcj for linux targets.
1068 * Makefile.in (CONFIGURE_TARGET_MODULES): Pass back configuration
1069 failures of subdirectories.
1073 * configure: handle DOS-style absolute paths.
1077 * configure.in: remove supported directories from $noconfigdirs for DJGPP.
1081 * Makefile.in (BASE_FLAGS_TO_PASS): Alphabetize.
1082 (libstdcxx_incdir): Pass down.
1083 * config.if: Remove expired bits for cxx_interface, add stub.
1084 (libstdcxx_incdir): Add variable for g++ include directory.
1085 * configure.in (gxx_include_dir): Use it.
1089 * configure.in: Handle lang_dirs.
1093 * configure.in: Disable libgcj for any target not specifically
1094 listed. Disable libgcj for x86 and Alpha Linux until compatible
1099 * Makefile.in (local-distclean): Also remove fastjar.
1103 * configure.in: Define libgcj. Disable libgcj target libraries for
1108 * configure.in (target_libs): Revert 2000-12-08 patch.
1109 (noconfigdirs): Added target-libjava.
1113 * Makefile.in: handle DOS-style absolute paths.
1117 * Makefile.in (TARGET_CONFIGDIRS): Wrong place. Removed note about
1119 * configure.in (target_libs): Removed `target-libjava'.
1123 * Makefile.in (TARGET_CONFIGDIRS): Added note about libjava.
1124 (ALL_MODULES): Added fastjar.
1125 (NATIVE_CHECK_MODULES, INSTALL_MODULES, CLEAN_MODULES): Likewise.
1126 (all-target-libjava): all-fastjar replaces all-zip.
1127 (all-fastjar): Added.
1128 (configure-target-fastjar, all-target-fastjar): Likewise.
1129 * configure.in (host_tools): Added fastjar.
1133 * Makefile.in (local-distclean): Remove leftover built files.
1137 * configure.in (enable_libstdcxx_v3): Fix typo,
1138 libstd++ -> libstdc++.
1142 * configure: Provide the original toplevel configure arguments
1143 (including $0) to subprocesses in the environment rather than
1144 through gcc/configargs.h.
1148 * configure: Turn on libstdc++ V3 by default.
1152 * configure (gcc/configargs.h): Only create if there is a build GCC
1157 * configure: Save configure arguments to gcc/configargs.h.
1161 * Makefile.in (bootstrap): avoid recursion if subdir missing
1163 (do-proto-toplev): ditto
1167 * configure.in: Do not build byacc for hppa64. Provide paths to the
1168 X11 libraries for hppa64.
1172 * Makefile.in (all-gcc): Depend on all-zlib.
1173 (CLEAN_MODULES): Add clean-zlib.
1174 (ALL_MODULES): Add all-zlib.
1175 * configure.in (host_libs): Add zlib.
1179 * configure.in (FLAGS_FOR_TARGET): Use $target_configdirs and
1180 $targargs to tell whether newlib is going to be built.
1182 * configure.in [disable-libstdcxx-v3] (libstdcxx_flags): Search
1183 $$r/TARGET_SUBDIR/libio for _G_config.h.
1187 * configure.in (libstdcxx_flags): Remove -isystem $$s/libio/stdio.
1189 * configure: Make enable_threads and enable_shared defaults
1190 explicit. Substitute enable_threads into generated Makefiles.
1191 * configure.in: Accept *-*-linux* not just *-*-linux-gnu*.
1192 * libtool.m4: Accept *-*-linux* not just *-*-linux-gnu*.
1196 * configure.in: Re-enable all references to libg++ and librx.
1200 * configure.in: Add *-*-freebsd* configurations.
1204 * Makefile.in (do-tar-bz2): Delete rule. Replace with ...
1205 (do-tar, do-bz2): New rules.
1206 (taz): Update. Replace do-tar-bz2 with do-tar and do-bz2.
1207 (gdb-tar): New rule.
1208 (gdb-taz): Rewrite. Use gdb-tar and do-bz2.
1209 (insight_dejagnu.tar): New rule.
1210 (insight.tar): New rule.
1211 (gdb+dejagnu.tar): New rule.
1212 (gdb.tar): New rule.
1216 * MAINTAINERS: Update dejagnu/
1220 * ltmain.sh (relink_command): Fix typo in previous change.
1224 * ltmain.sh (taglist): Initialized. Don't let `CC' tag out of it.
1225 (relink_command): Added --tag flags.
1226 (mode=install): If relinking fails; error out.
1230 * Makefile.in (NOTPARALLEL): New. Use it instead of explicit
1232 (do-check): Rename from check.
1233 (check): Allow parallel check.
1237 * Makefile.in (.NOTPARALLEL): Add fake tag.
1241 * configure.in: Enable gprof for mips*-*-linux*.
1245 * configure.in (libstdcxx_flags): Don't add libstdc++-v3 flags for
1247 (CXX_FOR_TARGET): Add -shared-libgcc for libstdc++-v3 and libjava.
1251 * texinfo/texinfo.tex: Update to version 2002-02-14.08.
1255 * config.guess: Import from master sources, rev 1.232.
1256 * config.sub: Import from master sources, rev 1.246.
1260 * Makefile.in (MAKEINFO): Don't assume makeinfo will be built just
1261 because its Makefile is there; test for the executable instead.
1265 Contribute sh64-elf.
1267 * configure.in: Added sh64-*-*.
1271 * COPYING.NEWLIB: Remove advertising clause from
1272 Berkeley and Red Hat licenses.
1276 * Makefile.in: Add all-tix to deps for all-snavigator
1277 so that tix is built when building snavigator.
1281 * config.guess: Import from master sources, rev 1.229.
1282 * config.sub: Import from master sources, rev 1.240.
1287 * libtool.m4 (HPUX_IA64_MODE): Set to 32 or 64 based on ABI.
1288 (lt_cv_deplibs_check_method, lt_cv_file_magic_cmd,
1289 lt_cv_file_magic_test_file): Set to appropriate values for HP-UX
1291 * ltcf-c.sh (archive_cmds, hardcode_*): Ditto.
1292 * ltconfig (shlibpath_*, dynamic_linker, library_names_spec,
1293 soname_spec, sys_lib_search_path_spec): Ditto.
1297 * configure.in (*-*-netbsd*): New. Skip target-newlib,
1298 target-libiberty, and target-libgloss. Skip Java-related
1299 libraries if not supported for NetBSD on target CPU.
1303 * configure.in: Import StrongARM and XScale target_configdirs from
1308 * config.guess: Import from master sources, rev 1.225.
1309 * config.sub: Import from master sources, rev 1.238.
1311 * MAINTAINERS: Updated notes on config.guess and config.sub.
1315 * configure.in (ia64*-*-hpux*): New target for IA64 HP-UX,
1316 ld and gdb are not supported.
1320 * Change reference to Cygnus Solutions to be Red Hat.
1324 * COPYING.NEWLIB: Update generic copyright date.
1328 * configure.in: Remove target-bsp and target-cygmon from arm builds.
1329 Allow target-libgloss to be built for arm, strongarm, and xscale.
1333 * MAINTAINERS: Update URL for config.* scripts.
1337 * config.sub: Import latest version.
1338 * config.guess: Likewise.
1342 * configure.in (FLAGS_FOR_TARGET): Remove -nostdinc and -isystem
1343 options for i[3456]86-pc-linux* native builds.
1347 * MAINTAINERS: gcc adopts symlink-tree, refer more to
1350 Import this patch from gcc:
1354 * symlink-tree: handle DOS-style absolute paths.
1359 When build != host, create libiberty for the build machine.
1361 * Makefile.in (TARGET_CONFIGARGS, BUILD_CONFIGARGS): Replace
1363 (ALL_BUILD_MODULES_LIST, BUILD_CONFIGDIRS, BUILD_SUBDIR):
1365 (ALL_BUILD_MODULES, CONFIGURE_BUILD_MODULES): New variables
1367 (all.normal): Depend on ALL_BUILD_MODULES.
1368 (CONFIGURE_TARGET_MODULES rule): Use TARGET_CONFIGARGS.
1369 (all-build-libiberty): Depend on configure-build-libiberty.
1371 * configure: Calculate and substitute proper value for
1373 * configure.in: Create the build subdirectory.
1374 Calculate and substitute TARGET_CONFIGARGS (formerly
1375 CONFIG_ARGUMENTS); also BUILD_SUBDIR and BUILD_CONFIGARGS (new).
1379 * config.sub: Update to version 1.232 on subversion.
1383 * Makefile.in (do-proto-toplev): Use msgfmt to generate .gmo
1384 files from .po files for a distribution.
1388 * COPYING.NEWLIB: Mention preserved notice in specific parts.
1392 Merged from net gcc:
1394 * ltcf-c.sh: Use $objext, not $ac_objext.
1396 * ltcf-cxx.sh: Add support for GNU.
1398 * ltcf-c.sh: Don't disable shared libraries for AIX5/IA64. Preserve
1399 default settings if using GNU tools with that configuration.
1400 * ltcf-cxx.sh: Ditto.
1401 * ltcf-gcj.sh: Ditto.
1403 * ltconfig: Set max_cmd_len to a maximum of 512Kb, as it seems some
1404 HPUX 11.0 systems have trouble with 1MB. Mark as gcc-local.
1405 * ltmain.sh: Mark as gcc-local.
1409 * Makefile.in (all-bison): Revert 2001-10-24.
1410 Don't depend on texinfo.
1414 * COPYING.NEWLIB: Add BSD-style license/copyright blurb for my work.
1418 * configure.in (--enable-languages): Be more permissive about
1419 syntax. Check for empty lists better. Warn about $LANGUAGES.
1423 * Makefile.in (MAKEINFO): Use "missing" for makeinfo older than 4.0.
1427 Makefile.in (all-bison): Don't depend on texinfo.
1431 * gettext.m4: Test po/POTFILES.in exists before trying to read.
1435 * Makefile.in (configure-target-gperf): Depend on $(ALL_GCC_CXX).
1439 * config.sub, config.guess: Import latest from subversions.
1443 * Makefile.in (AS_FOR_TARGET, LD_FOR_TARGET,
1444 DLLTOOL_FOR_TARGET, WINDRES_FOR_TARGET, AR_FOR_TARGET,
1445 RANLIB_FOR_TARGET, NM_FOR_TARGET): Don't use double quotes to
1446 avoid quotes nesting problems.
1447 (NATIVE_CHECK_MODULES): Ditto, just for consistency.
1448 (DO_X): Export only variables that are set.
1452 * configure.in (sparc-sun-solaris2*): Don't use /usr/bin/which on
1453 Solaris when testing for the /usr/ucb/cc compiler; it has incorrect
1454 semantics. Use the shell built-in "type" command instead.
1458 * config.sub: Reverted the earlier change, this version is not the
1463 * config.sub: Change machine triplets from mipsel*-* to mips*el-*.
1464 Add support for mips64.
1468 * configure.in: Enable libstdc++-v3 for h8300 targets.
1473 * config.sub: Add support for mipsisa32.
1477 * config.sub, config.guess: Import latest from subversions.
1481 * config.sub, config.guess: Import latest from subversions.
1485 * MAINTAINERS: Clarify libiberty merge rules and procedures.
1489 * Makefile.in: Revert 2001-06-17.
1490 (VER): If AM_INIT_AUTOMAKE uses BFD_VERSION, get version from bfd/.
1494 * Makefile.in (gas.tar.bz2): Pass TOOL=bfd PACKAGE=gas to make.
1495 (gas+binutils.tar.bz2): Likewise.
1496 (binutils.tar.bz2): Pass TOOL=bfd PACKAGE=binutils to make.
1500 * Makefile.in (VER): When present, extract the version number from
1501 the file version.in.
1505 * Makefile.in (AS_FOR_TARGET, LD_FOR_TARGET, NM_FOR_TARGET): If
1506 gcc/xgcc is built, use -print-prog-name to find out the program
1511 * ltcf-c.sh (archive_cmds, archive_expsym_cmds) [solaris,
1512 with_gcc]: Use `gcc -shared' to build a shared library.
1516 * ltcf-c.sh (archive_cmd) [hpux, with_gcc]: Use gcc to link shared
1521 * ltcf-cxx.sh (osf3/osf4/osf5): Support creation of C++ shared
1522 libraries when using g++ with native linker.
1526 * ltconfig, ltmain.sh: Upgrade to libtool 1.4a 1.641.2.256.
1530 * configure.in : enable ld for aix
1534 * ltcf-cxx.sh (allow_undefined_flag, no_undefined_flag)
1535 [aix4*|aix5*]: Prepend blank.
1539 * ltconfig, ltmain.sh, libtool.m4, ltcf-c.sh, ltcf-cxx.sh,
1540 ltcf-gcj.sh: Upgraded to libtool 1.4a 1.641.2.254. Rebuilt a number
1541 of subdir/configure scripts to use the new libtool.m4.
1545 * config.if (libc_interface): Set to -libc6.2- for cross
1546 compiling to Linux/glibc 2.2.
1550 * configure.in (noconfigdirs) [*-cygwin*, *-mingw*, *-beos]: Disable
1555 * configure.in (noconfigdirs): Don't reset it from scratch in the
1556 target case; only append to it.
1560 * configure.in (noconfigdirs) [hppa*-*-*, mips*-*-irix6*,
1561 sparc-*-solaris2.8]: Disable ${libgcj}.
1565 * configure.in (libgcj_saved): Copy from $libgcj.
1566 (libgcj): Zero out if --enable-libgcj; add to noconfigdirs is
1571 * ltconfig, ltmain.sh, ltcf-cxx.sh: Upgraded to libtool 1.4a
1576 * ltconfig, ltmain.sh, libtool.m4, ltcf-c.sh, ltcf-cxx.sh,
1577 ltcf-gcj.sh: Upgraded to libtool 1.4a 1.641.2.226.
1581 * Makefile.in (CXX_FOR_TARGET_FOR_RECURSIVE_MAKE, RECURSE_FLAGS):
1583 (bootstrap, cross): Use RECURSE_FLAGS.
1584 * configure.in: Subst CXX_FOR_TARGET_FOR_RECURSIVE_MAKE.
1588 * configure.in (CXX_FOR_TARGET): Use xgcc for libstdc++-v3.
1592 * README-maintainer-mode: Add note about inability to use "make
1593 distclean" in maintainer mode.
1599 * ltcf-c.sh: Clear ac_cv_prog_cc_pic for DJGPP. Do not add
1600 '-DPIC' to ac_cv_prog_cc_pic for DJGPP.
1601 * ltcf-cxx.sh: Likewise.
1602 * ltcf-gcj.sh: Likewise.
1606 * config.sub, config.guess: Import latest from subversions.
1610 * ltconfig, ltmain.sh, libtool.m4, ltcf-c.sh, ltcf-cxx.sh,
1611 ltcf-gcj.sh: Upgraded to libtool 1.4a 1.641.2.198.
1615 * Makefile.in: all-m4 depends on all-texinfo.
1619 * Makefile.in (ALL_GCC, ALL_GCC_C, ALL_GCC_CXX): Set before use.
1623 * COPYING.NEWLIB: Remove DJ Delorie's address because it is no
1628 * configure.in (noconfigdirs): Allow configuration of texinfo
1633 * config.guess: Add linux target for S/390.
1634 * config.sub: Likewise.
1635 * configure.in: Likewise.
1639 * configure: Output host type to stdout, not stderr.
1643 * config.guess: Import from subversions.gnu.org (revision 1.181).
1644 * config.sub: Import from subversions.gnu.org (revision 1.199).
1648 * config.guess: Handle hppa64-linux systems.
1652 * ltcf-cxx.sh (ac_cv_prog_cc_pic_works, ac_cv_prog_cc_static_works):
1653 Don't unset, it's non-portable and no longer necessary, set to empty
1658 * ltconfig: Shell portability fix for the tagname validity check.
1662 * ltcf-cxx.sh: Use parentheses around eval $ac_compile.
1666 * ltcf-c.sh (ld_shlibs) [aix5*]: Disable on unknown CPU types.
1667 * ltcf-cxx.sh, ltcf-gcj.sh: Likewise.
1671 * ltmain.sh (TAG disable-shared, TAG disable-static): Make sure we
1672 keep at least one of build_libtool_libs or build_old_libs set to
1677 * ltcf-gcj.sh (lt_simple_link_test_code): Remove stray `(0)'.
1678 * libtool.m4 (_AC_LIBTOOL_GCJ): Pass $CPPFLAGS on.
1682 * Makefile.in (ETC_SUPPORT): Also add configbuild.* and configdev.*.
1686 * Makefile.in (ETC_SUPPORT): Add configure.texi and associated info
1691 * COPYING.NEWLIB: Put into source repository.
1695 * configure.in (host_tools): Add sid.
1696 Always configure cgen.
1697 * Makefile.in (all-sid): New target.
1698 (check-sid, clean-sid, install-sid): Likewise.
1702 * config.sub, config.guess: Update from subversions.
1706 * configure.in: Disable language-specific target libraries for
1707 languages that aren't enabled.
1711 * configure.in (xscale-elf): Add target.
1712 (xscale-coff): Add target.
1713 (c4x, c5x, tic54x): Move after ARM targets.
1717 * ltcf-gcj.sh: Added file, required by 2000-11-18 merge.
1721 * ltcf-cxx.sh: Added file, required by 2000-11-18 merge.
1725 * Makefile.in: Merge with GCC and libgcj.
1726 (ALL_GCC_C, ALL_GCC_CXX): New macros. Use them as dependencies of
1727 configure-target-<library> when their configure scripts need the C
1728 or C++ library to have already been built to work properly.
1729 (do_proto_toplev): Set them to an empty string.
1733 * Makefile.in (HOST_LIB_PATH, TARGET_LIB_PATH): New macros.
1734 (REALLY_SET_LIB_PATH): Use them.
1738 * config.sub: Add support for Sun Chorus
1742 * config.sub: Add support for the *-storm-chaos OS.
1746 * configure.in (noconfigdirs): Don't compile some
1747 of the libraries for 68HC11 & 68hc12 targets.
1751 * ltconfig, ltmain.sh, libtool.m4: Updated from libtool
1752 multi-language branch, to work around Solaris' /bin/sh bug. Rebuilt
1753 all affected `configure' scripts.
1757 * Makefile.in (DEVO_SUPPORT): Added gettext.m4, libtool.m4 and
1762 * config.sub, config.guess: Update from subversions.
1766 * Makefile.in (all-zlib): Added dummy target.
1768 * ltconfig, ltmain.sh, libtool.m4, ltcf-c.sh: Updated from libtool
1769 multi-language branch.
1773 * Makefile.in (all-bootstrap): Added all-texinfo and all-zlib.
1774 (bootstrap*): Depend on all-bootstrap.
1778 * configure.in (FLAGS_FOR_TARGET): Use -nostdinc even for Canadian
1779 crosses, but add gcc/include to the header search path for them.
1783 * ltconfig, ltmain.sh: Updated from libtool multi-language branch.
1784 * libtool.m4, ltcf-c.sh: Copied from libtool multi-language branch.
1785 * gettext.m4: New file, extracted from aclocal.m4.
1789 * config-ml.in (CC, CXX): Avoid trailing whitespace.
1790 (LD_LIBRARY_PATH, SHLIB_PATH): Adjust for multilibs and export to
1795 * Makefile.in (ALL_MODULES): Add all-cgen.
1796 (CROSS_CHECK_MODULES,INSTALL_MODULES,CLEAN_MODULES): Similarily.
1797 (all-cgen): New target.
1798 (all-opcodes,all-sim): Depend on all-cgen.
1799 * configure.in (host_tools): Add cgen.
1800 Only configure cgen if --enable-cgen-maint.
1804 * config-ml.in (CC, CXX): Don't introduce a leading space.
1808 * configure.in (libstdcxx_flags): Use
1809 libstdc++-v3/src/libstdc++.INC.
1813 * configure.in (libstdcxx_flags): Use libstdc++-v3/src/INCLUDES.
1817 * configure.in (CC_FOR_TARGET, CHILL_FOR_TARGET,
1818 CXX_FOR_TARGET): Add -B$$r/gcc/ here.
1819 (FLAGS_FOR_TARGET): Not here.
1820 (CHILL_FOR_TARGET, CXX_FOR_TARGET): Don't check the list of languages.
1824 * configure.in (FLAGS_FOR_TARGET): invert test for xgcc, should mean
1825 "if we're also building gcc, and it's a gcc that will run on the
1826 build machine, we want to use its includes instead of the system's
1831 * configure.in (libstdcxx_flags): Don't use `"'.
1833 * config-ml.in: Adjust multilib search paths to the
1834 appropriate multilib tree.
1838 * configure.in (CHILL_FOR_TARGET, CXX_FOR_TARGET): Convert blanks to
1839 commas in $LANGUAGES.
1843 * configure.in (qCXX_FOR_TARGET): Use echo instead of expr.
1847 * configure.in (qCXX_FOR_TARGET): Quote `&' characters in
1848 CXX_FOR_TARGET for sed.
1852 * configure.in (CC_FOR_TARGET, CHILL_FOR_TARGET, CXX_FOR_TARGET):
1853 Do not override if already set in the environment or in configure.
1854 Don't duplicate $(FLAGS_FOR_TARGET) if it already appears in them.
1855 (FLAGS_FOR_TARGET): Don't use host directories on Canadian crosses.
1859 * Makefile.in (FLAGS_FOR_TARGET): New macro.
1860 (GCC_FOR_TARGET): Use it.
1861 (CC_FOR_TARGET, CXX_FOR_TARGET, CHILL_FOR_TARGET): Now defined...
1862 * configure.in: ... here.
1863 (FLAGS_FOR_TARGET): Define. Add ld build dir to -L path.
1864 (libstdcxx_flags): Define and append to CXX_FOR_TARGET.
1868 * Makefile.in (configure-target-libf2c): Depend on $(ALL_GCC).
1869 (configure-target-libchill, configure-target-libobjc): Likewise.
1871 * configure.in: Use the same cache file for all target libs.
1872 * config-ml.in: But different cache files per multilib variant.
1876 * configure (topsrcdir): Don't use dirname.
1880 * configure.in: Remove all references to libg++ and librx.
1882 * configure, configure.in, Makefile.in: Unify gcc and binutils.
1886 * config.sub: Update to subversions version 2000-07-06.
1890 * configure.in (host_makefile_frag): Use mh-ia64pic on IA-64 hosts.
1891 (target_makefile_frag): Use mt-ia64pic on IA-64 targets.
1895 * symlink-tree: Check number of arguments.
1899 * texinfo/texinfo.tex: Update to version 2000-05-28.15.
1903 * Makefile.in (CXX_FOR_TARGET): Add libstdc++ to the library
1904 search path for a g++ extracted from the build tree. This
1905 will allow link tests run by configure scripts in
1906 subdirectories to succeed.
1910 * ltconfig: Add support for mips-dde-sysv4.2MP
1914 * ltconfig: Check for host_os beeing one of `cygwin', `mingw' or
1915 `os2'. Force ac_cv_exeext to be ".exe" in that case.
1919 * configure.in (noconfigdirs): Set noconfigdirs for tic54x target.
1920 * config.sub: Add tic54x target.
1924 * README-maintainer-mode: New file: Contains notes on using
1925 --enable-maintainer-mode with binutils.
1929 * texinfo/texinfo.tex: Update. Version from makeinfo 4.0.
1933 * config.sub: Import CVS version 1.167 Tue May 30 09:00:07 2000.
1934 * config.guess: Import CVS version 1.148 Tue May 30 09:00:06 2000
1938 * Makefile.in (CC_FOR_TARGET): Make sure as/ld in the gcc
1939 directory are used if they exist. Make sure
1940 $(build_tooldir)/include is searched for header files,
1941 $(build_tooldir)/lib/ for library files.
1942 (GCC_FOR_TARGET): Likewise.
1943 (CXX_FOR_TARGET): Likewise.
1947 * configure.in (hppa*64*-*-*): Do build ld for this configuration.
1951 * Makefile.in (configure-target-libiberty): Depend on
1952 configure-target-newlib.
1956 * configure.in, Makefile.in: Merge all libffi-related
1957 configury stuff from the libgcj tree.
1962 * Makefile.in (do-tar-bz2, do-md5sum): Skip CVS directories.
1967 * Makefile.in (do-djunpack): New target. Update djunpack.bat with
1968 current version information. Add to proto-toplev directory.
1969 (gdb-taz): Build do-djunpack.
1973 * configure.in: Special case powerpc*-*-aix* target_makefile_frag.
1977 * ltmain.sh: Preserve in relink_command any environment
1978 variables that may affect the linker behavior.
1982 * config.sub (basic_machine): Recognize hppa64 as a valid cpu type.
1986 * configure.in (ia64*-*-elf*): Add gdb and friends to noconfigdirs.
1990 * djunpack.bat: Change the Sed script to replace @V@ in fnchange.lst
1991 with the version name.
1999 * djunpack.bat: New file.
2003 * Makefile.in (taz, gdb-taz, gas.tar.bz2, binutils.tar.bz2,
2004 gas+binutils.tar.bz2, libg++.tar.bz2, gnats.tar.bz2, gdb.tar.bz2,
2005 dejagnu.tar.bz2, gdb+dejagnu.tar.bz2, insight.tar.bz2,
2006 insight+dejagnu.tar.bz2, newlib.tar.bz2): Pass MD5PROG to sub-make.
2010 * config.sub (case $basic_machine): Change default for "ibm-*"
2015 * Makefile.in (gdb-taz): New target. GDB specific archive.
2016 (do-md5sum): New target.
2018 (PACKAGE): Default to TOOL.
2019 (VER): Default to a shell script.
2020 (taz): Rewrite target. Move real work to do-proto-toplev. Include
2021 md5 checksum generation.
2022 (do-proto-toplev): New target. Create $(PACKAGE)-$(VER) link.
2023 (do-tar-bz2): Delete creation of $(PACKAGE)-$(VER) link.
2024 (gdb.tar.bz2, dejagnu.tar.bz2, gdb+dejagnu.tar.bz2,
2025 insight.tar.bz2): Use gdb-taz to create archive.
2029 * configure (warn_cflags): Delete.
2034 * configure.in (enable_libstdcxx_v3): Add.
2035 (target_libs): Add bits here to switch between libstdc++-v2 and
2037 * config.if: And this file too.
2038 * Makefile.in: Add libstdc++-v3 targets.
2042 * config.sub (d30v): Add d30v as a basic machine type.
2046 * configure.in: -linux-gnu*, not -linux-gnu.
2050 * Makefile.in (taz): Set PACKAGE to TOOL when not defined.
2051 (do-tar-bz2): Replace TOOL with PACKAGE.
2052 (gdb.tar.bz2): Remove GDBTK from GDB package.
2053 (gdb+dejagnu.tar.bz2, insight.tar.bz2, insight+dejagnu.tar.bz2,
2054 dejagnu.tar.bz2): New packages.
2058 * configure.in: Add entry for mips*-*-linux*, move catch all
2059 *-*-*linux* entry below this one.
2063 * ltconfig, ltmain.sh: Update to libtool 1.3.4.
2067 * config.sub: Support an OS of "wince".
2071 * config.guess, config.sub: Updated to match config's 2000-02-15
2076 * config.sub: Add support for Linux/IBM 370.
2077 * configure.in: Likewise.
2081 * configure.in: Add mips-pe, sh-pe and arm-wince-pe targets.
2085 * config.guess: Guess "cygwin" rather than "cygwin32".
2089 * configure (gcc_version): When setting, narrow search to
2090 lines containing `version_string'.
2094 * config.sub: Add support for avr target.
2098 * config.sub: Add mmix-knuth-mmixware.
2102 * Makefile.in (CC_FOR_TARGET): Add new winsup directory
2103 structure stuff to -L library search.
2104 (CXX_FOR_TARGET): Ditto.
2105 (CROSS_CHECK_MODULES): Fix spelling mistake.
2109 * Makefile.in (CXX_FOR_TARGET): Use g++, not xgcc, to invoke
2114 * configure.in: Don't build some bits for beos.
2118 * Makefile.in (CC_FOR_TARGET): Use newlib libraries as well
2123 * configure.in: Use mt-aix43 to handle *_TARGET defs,
2128 * config.guess (alpha-osf, alpha-linux): Detect ev67.
2129 * config.sub: Accept alphaev[78], alphaev8.
2133 * config.guess, config.sub: Update from autoconf.
2137 * config-ml.in (sparc*-*-*): Disable sparcv9 support if the
2138 necessary libraries are missing.
2142 * configure: Fix quoting inside arguments of eval.
2146 * config-ml.in: Allow suppression of some ARM multilibs.
2150 * config.guess: Add OS/390 match pattern.
2151 * config.sub: Add mvs, openedition targets.
2152 * configure.in (i370-ibm-opened*): New.
2156 * config.sub: Add support for configuring for pj.
2160 * config.sub (maybe_os): Add support for configuring for fr30.
2164 * configure.in: Do not configure or build ld for AIX
2165 platforms. ld is known to be broken on these platforms.
2169 * config-ml.in: Pass compiler flag corresponding to multidirs to
2174 * Makefile.in (LDFLAGS): Define.
2178 * configure.in (i[3456]-*-mingw32*): Don't put gprof in
2180 (*-*-cygwin*): Likewise.
2185 * Makefile.in (GAS_SUPPORT_DIRS): Add mkdep.
2186 (BINUTILS_SUPPORT_DIRS): Add mkdep.
2189 * configure (tmpfile): Change cONf$$ to cNf$$ to avoid an overly
2190 long file name when using DJGPP on MS-DOS.
2194 * config.sub (vxworks case): Use os=-vxworks, not os=vxworks.
2198 * Makefile.in (check-target-libio): Remove all-target-libstdc++
2199 dependency as this causes "make check" to globally "make all"
2203 * configure.in (target_libs): Added target-zlib.
2204 * Makefile.in (ALL_TARGET_MODULES): Added zlib.
2205 (CONFIGURE_TARGET_MODULES): Likewise.
2206 (CHECK_TARGET_MODULES): Likewise.
2207 (INSTALL_TARGET_MODULES): Likewise.
2208 (CLEAN_TARGET_MODULES): Likewise.
2209 (configure-target-zlib): New target.
2210 (all-target-zlib): Likewise.
2211 (all-target-libjava): Depend on all-target-zlib.
2212 (configure-target-libjava): Depend on configure-target-zlib.
2214 * Makefile.in (configure-target-libjava): Depend on
2215 configure-target-newlib.
2216 (configure-target-boehm-gc): New target.
2217 (configure-target-qthreads): New target.
2219 * configure.in (target_libs): Added target-qthreads.
2220 * Makefile.in (ALL_TARGET_MODULES): Added qthreads.
2221 (CONFIGURE_TARGET_MODULES): Likewise.
2222 (CHECK_TARGET_MODULES): Likewise.
2223 (INSTALL_TARGET_MODULES): Likewise.
2224 (CLEAN_TARGET_MODULES): Likewise.
2225 (all-target-qthreads): New target.
2226 (configure-target-libjava): Depend on configure-target-qthreads.
2227 (all-target-libjava): Depend on all-target-qthreads.
2229 * Makefile.in (ALL_TARGET_MODULES): Added libjava, boehm-gc.
2230 (CONFIGURE_TARGET_MODULES): Likewise.
2231 (CHECK_TARGET_MODULES): Likewise.
2232 (INSTALL_TARGET_MODULES): Likewise.
2233 (CLEAN_TARGET_MODULES): Likewise.
2234 (all-target-libjava): New target.
2235 (all-target-boehm-gc): Likewise.
2236 * configure.in (target_libs): Added libjava, boehm-gc.
2240 * Makefile.in (binutils.tar.bz2): Don't pass makeall.bat and
2241 configure.bat in SUPPORT_FILES.
2242 (gas+binutils.tar.bz2): Likewise.
2244 * makeall.bat: Remove; obsolete.
2249 * configure.bat: Remove; obsolete.
2253 * configure: Add -W -Wall to the default CFLAGS when compiling with
2258 * configure.in: Build ld, binutils & gas for hppa*-*-linux-gnu*.
2262 * configure.in: Build ld on IRIX6.
2266 * Makefile.in: Change distribution targets to use bzip2 instead of
2268 (TEXINFO_SUPPORT): Set to just texinfo/texinfo.tex.
2269 (taz): Don't use texinfo/gpl.texinfo or texinfo/lgpl.texinfo.
2273 * config.sub: Add mcore target.
2277 * config.guess (ppc-*-linux-gnu): Also use ld emul elf32ppclinux.
2281 * config.guess (dummy): Changed to $dummy.
2285 * config.sub: Tidied up case statements.
2289 * config.guess: Handle NEC UX/4800. Contributed by Jiro Takabatake
2292 * config.guess: Merge with FSF version. Future changes will be
2293 more accurately recorded in this ChangeLog.
2294 * config.sub: Likewise.
2298 * Makefile.in (GCC_FOR_TARGET): Add -I$(build_tooldir)/include.
2302 * ltmain.sh: [mode link] Always use CC given by ltconfig.
2306 * ltconfig, ltmain.sh: Update to libtool 1.2f.
2310 * configure.in (noconfigdirs): Don't build libstub for arm-elf targets.
2311 (noconfigdirs): Don't build any bsp stuff for for arm-oabi targets.
2312 Bad merge removed these two changes.
2317 * config.guess (interix Alpha): Add.
2321 * configure.in (i?86-*-beos*): Do config gperf; don't config
2322 gdb, newlib, or libgloss.
2326 * config-ml.in: On mips*-*-*, if multidirs contains mabi=64, try to
2327 link a trivial program with -mabi=64. If it fails, remove mabi=64
2332 * config.sub: Set basic_machine to i586 when target_alias = k6-*.
2336 * config.sub: Add support for mcore targets.
2340 * configure.in (d30v-*): Use config/mt-d30v as makefile fragment,
2341 not mt-ospace, in order to shut up assembler warning about using
2342 symbols that are named the same as registers.
2346 * Makefile.in (all-target-cygmon): Added all-target-bsp to the
2347 dependency list for all-target-cygmon.
2351 * config-ml.in: Check $host, not $target, for selective multilibs.
2352 (arm-*-*): Allow disabling of biendian, h/w fp, 26 bit apcs,
2353 thumb interworking, and underscore prefix multilibs.
2357 * missing: Update to version from current automake.
2361 * configure (gxx_include_dir): Removed.
2363 * configure.in (gxx_include_dir): Handle it.
2364 * Makefile.in: Likewise.
2368 * config.sub (mips64vr4111,mips64vr4111el) Add.
2372 * config.guess: Correct typo for detecting ELF on FreeBSD.
2376 * config/mh-go32: Delete.
2377 * config/mh-djgpp: New. Renamed from mh-go32.
2378 * configure.in (pc-msdosdjgpp): Set host_makefile_frag to
2383 * Makefile.in (all-target-bsp): Added all-gcc all-binutils and
2384 all-target-newlib to dependency list for all-target-bsp.
2388 * config.sub: Add i386-uwin support.
2389 * config.guess: Likewise.
2393 * configure.in: cleanup, add mh-*pic handling for arm, special
2394 case powerpc*-*-aix*
2398 * configure.in (noconfigdirs): Removed target-libgloss so libnosys.a
2403 * configure.in: Added bsp support to arm-*-coff and arm-*-elf
2408 * config.sub: Rename CYGNUS LOCAL to EGCS LOCAL
2412 * config.sub: Check for "cygwin*" rather than "cygwin32*"
2416 * config.sub: Fix typo in arm recognition.
2420 * configure.in (noconfigdirs): Changed target_configdirs to
2421 include target-bsp only for m68k-*-elf* and m68k-*-coff*
2422 rather than m68k-*-* since it is not known to work on
2423 m68k-aout. Ditto for arm-*-*oabi.
2427 * configure.in (*-*-windows*): Remove, no longer used.
2428 * config/mh-windows: Ditto.
2432 * config.guess: Automatically recognise ELF on FreeBSD. From Niall
2433 Smart and improved by Andrew Cagney.
2437 * config.guess: Recognize openbsd-*-hppa.
2441 * Makefile.in (REALLY_SET_LIB_PATH): Append $$$(RPATH_ENVVAR)
2442 only if it is not empty.
2448 * config.guess: Modified to recognize uname's armv* syntax.
2450 * config.sub: Modified to recognize uname's armv* syntax.
2454 * configure.in: Added target-bsp for sparclite.
2458 * config.sub: Recognize alphapca5[67] and up to alphaev8.
2462 * configure.in: Add support for strongarm port.
2463 * config.sub: Add support for strongarm target.
2467 * configure.in (*-*-cygwin32*): Use config/mh-cygwin instead of
2468 the old name config/mh-cygwin32.
2473 * configure.in: Do build ld for ix86 Solaris.
2477 * Makefile.in (EXTRA_GCC_FLAGS): Set AR to $AR instead of
2478 $AR_FOR_TARGET. Likewise for RANLIB.
2482 * config.sub (oabi): Recognize.
2483 * configure.in (arm-*-oabi): Handle.
2487 * config.guess: Improve detection of i686 on UnixWare 7.
2491 * config.guess: Add support for i386-pc-interix.
2492 * config.sub: Likewise.
2493 * configure.in: Likewise.
2494 * config/mh-interix: New file.
2498 * Makefile.in: Remove unneeded all-target-libio from
2499 from all-target-winsup target since it is now unneeded.
2500 Add all-target-libtermcap in its place since it is now
2505 * configure.in: makefile stub for cygwin target is probably
2506 unnecessary. Remove it for now.
2507 * config/mt-cygwin: Remove.
2511 * configure.in: libtermcap.a should be built when cygwin is the
2512 target as well as the host.
2513 * config.guess: Allow mixed case in cygwin uname output.
2514 * Makefile.in: Add libtermcap target.
2515 * config/mt-cygwin: New file. libtermcap target info.
2519 * config.sub: Clean up handling of hppa2.0.
2523 * config.guess: Use C code to identify more HP machines.
2527 * config.sub: Handle hppa2.0.
2531 * configure.in: Add cygmon for x86-coff and x86-elf. Configure
2532 cygmon for all sparclite targets, regardless of object format.
2536 * configure.in: Added target-bsp for several target architectures.
2538 * Makefile.in: Added rules for bsp.
2542 * config.guess: Improve detection of hppa2.0 processors.
2546 * config.guess: Recognize FreeBSD using ELF automatically.
2550 * configure (skip-this-dir): Add handling for new shell script, which
2551 might be created by a sub-directory's configure to indicate, this particular
2552 directory is "unwanted".
2553 * Makefile.in ($(CONFIGURE_TARGET_MODULES)): Likewise.
2557 * ltconfig: import from libtool, after changing libtool to
2558 account for the cygwin name change.
2562 * Makefile.in: CC_FOR_TARGET and CXX_FOR_TARGET should also
2563 include newlib/libc/sys/cygwin and newlib/libc/sys/cygwin32.
2567 * configure.in: Add libtermcap to list of cygwin dependencies.
2571 * Makefile.in: modify CC_FOR_TARGET and CXX_FOR_TARGET so that
2572 they include winsup/include when it's a cygwin target.
2576 * configure.in (host_tools): Added zip.
2577 * Makefile.in (all-target-libjava): Depend on all-zip.
2578 (all-zip): New target.
2579 (ALL_MODULES): Added all-zip.
2580 (NATIVE_CHECK_MODULES): Added check-zip.
2581 (INSTALL_MODULES): Added install-zip.
2582 (CLEAN_MODULES): Added clean-zip.
2586 * Makefile.in: lose "32" from comment about cygwin.
2590 * configure.in: Use -Os to build target libraries for the fr30.
2594 * config.sub: Add fr30.
2598 * configure.in: drop "32" from config/mh-cygwin32. Check
2599 cygwin* instead of cygwin32*.
2600 * config.sub: Check cygwin* instead of cygwin32*.
2604 * config.guess: Match any version of Unixware7.
2608 * Makefile.in configure.in: Add the ability to use tcl8.1 and tk8.1
2613 * config.if (cxx_interface, libstdcxx_interface): Do not try to set
2614 these if the appropriate directories and files to not exist.
2618 * Makefile.in (DEVO_SUPPORT): Add config.if.
2622 * configure: Add pattern to replace "build_tooldir"'s
2623 definition in the generated Makefile with "tooldir"'s
2628 * config.sub: Bring back lost sparcv9.
2630 * Makefile.in (all-snvavigator): Remove all-flexlm dependency.
2634 * Makefile.in (CHILL_FOR_TARGET): Mirror recent changes to
2635 CC_FOR_TARGET and friends.
2639 * Makefile.in (build_tooldir): New variable, same as tooldir.
2640 (CC_FOR_TARGET, GCC_FOR_TARGET, CXX_FOR_TARGET): Add
2641 -B$(build_tooldir)/bin/.
2642 (BASE_FLAGS_TO_PASS): Pass build_tooldir down.
2646 * config.sub: Add support for i[34567]86-pc-udk.
2647 * configure.in: Likewise.
2651 * Makefile.in: add bzip2 package building bits for user
2653 * configure.in: ditto
2657 * Makefile.in (TARGET_CONFIGDIRS): Add libobjc.
2658 (ALL_TARGET_MODULES): Add all-target-libobjc.
2659 (CONFIGURE_TARGET_MODULES, CHECK_TARGET_MODULES): Similarly.
2660 (INSTALL_TARGET_MODULES, CLEAN_TARGET_MODULES): Similarly.
2661 (all-target-libchill): Add dependencies.
2662 * configure.in (target_libs): Add libchill.
2666 * configure.in (target_subdir): Remove duplicate line.
2670 * Makefile.in (all-automake): fix dependencies.
2674 * configure.in: Minor cleanups for building in the $(target_alias)
2679 * Makefile.in (bootstrap): Set r and s before make all. Use
2680 BASE_FLAGS_TO_PASS in make all.
2685 * Makefile.in (bootstrap): Pass TARGET_FLAGS_TO_PASS to `make all'.
2689 * config.sub: Fix typo in last change.
2693 * config.sub: Add support for C4x target.
2694 * configure.in: Likewise.
2698 * config.sub: Recognize sparcv9 just like sparc64.
2702 * config.guess: Match "Pent II" or "PentII" for OpenServer.
2706 * config.guess: Correctly identify Pentium II sco boxes.
2708 * config.guess: Fix "tr" code. From Weiwen Liu.
2712 * configure.in: Do not assume x86-svr4 or x86-unixware can handle
2717 * Makefile.in (TARGET_CONFIGDIRS): Add libchill.
2718 (ALL_TARGET_MODULES): Add all-target-libchill.
2719 (CONFIGURE_TARGET_MODULES, CHECK_TARGET_MODULES): Similarly.
2720 (INSTALL_TARGET_MODULES, CLEAN_TARGET_MODULES): Similarly.
2721 (all-target-libchill): Add dependencies.
2722 * configure.in (target_libs): Add libchill.
2726 * config.guess: Avoid assumptions about "tr" behaves when
2727 LANG is set to something other than English.
2731 * configure (gxx_include_dir): Changed to
2732 '${prefix}/include/g++'-${libstdcxx_interface}.
2734 * config.if: New to determine the interfaces.
2738 * config.guess: Detect and handle MPE/IX.
2739 * config.sub: Deal with MPE/IX.
2743 * configure.in: Use mh-aix43.
2747 * configure: Fix --without/--disable cases for gxx-include-dir.
2751 * mdata-sh: Imported. Needed for automake support.
2755 * Makefile.in (taz): Try "chmod -R og=u ." before
2756 "chmod og=u `find . -print`".
2760 * configure.in: Add arm-elf and thumb-elf support.
2764 * Makefile.in: Undo previous patch.
2768 * Makefile.in (INSTALL_TARGET): Move EXTRA_TARGET_HOST_INSTALL_MODULES
2770 (install-no-fixedincludes): and here
2771 (INSTALL_MODULES): ... from here.
2775 * config.sub: Merge with FSF.
2777 * config.guess: Merge with FSF.
2781 * configure (extraconfigdirs): New variable.
2782 (SUBDIRS): Add extraconfigdirs and recurse on them too.
2783 * Makefile.in (all): Move higher in file.
2784 (EXTRA_TARGET_HOST_ALL_MODULES): New variable.
2785 (EXTRA_TARGET_HOST_{INSTALL,CHECK}_MODULES): New variables.
2786 (ALL_MODULES): Add EXTRA_TARGET_HOST_ALL_MODULES.
2787 (CROSS_CHECK_MODULES): Add EXTRA_TARGET_HOST_CHECK_MODULES.
2788 (INSTALL_MODULES): Add EXTRA_TARGET_HOST_INSTALL_MODULES.
2792 * Makefile.in (all-target-libjava): Depend on all-gcc and
2794 (configure-target-libjava): Depend on $(ALL_GCC).
2798 * config.guess: (*-pc-sco3.2v5) Add detection for Pentium II.
2799 (*-pc-unixware7) Add detection for Pentium II, Pentium Pro.
2803 * ylwrap: Change absolute path checks to check for DOS style path
2806 * ylwrap: Don't use a full path name if the source file is in the
2809 * config-ml.in: Default to being verbose, to match Feb 18 change to
2814 Brought over from egcs:
2818 * configure.in (target_subdir): Set to ${target_alias} instead
2823 * configure.in (target_subdir): Set to libraries if enable_multilib.
2827 * Makefile.in ($(CONFIGURE_TARGET_MODULES)): If there are any
2828 multilibs, force reconfiguration the first time we create
2829 multilib.out in a subdirectory, in case TARGET_SUBDIR is `.'.
2833 * configure.in: Strip any --no option from CONFIG_ARGUMENTS, to
2834 avoid confusion with --no-recursion.
2838 * configure.in: Win32 hosts shouldn't use install -x
2839 * install-sh: remove -x option, and special .exe-handling
2844 * config.guess: Recognize i586-pc-beos.
2845 * configure.in: Don't build some bits for beos.
2849 * configure: If CC is set but CFLAGS is not, and CC is gcc, make
2850 CFLAGS default to -O2.
2852 * ltmain.sh: Add some hacks to make SunOS --enable-shared work
2857 * ltmain.sh: Correct install when using a different shell.
2861 * ltconfig, ltmain.sh: Update to libtool 1.2b.
2865 * makefile.vms: Update to build binutils/makefile.vms. Add install
2870 * ltconfig: Update to correct AIX handling.
2874 * Makefile.in (BASE_FLAGS_TO_PASS): Add TARGET_SUBDIR.
2876 * configure.in (target_subdir): Set to ${target_alias} instead
2881 * Makefile.in (BASE_FLAGS_TO_PASS): Add gcc_version_trigger.
2882 (Makefile): Depend on $(gcc_version_trigger).
2884 * configure (gcc_version): Change default initializer to empty
2886 (gcc_version_trigger): New variable; pass this variable down
2887 to subdir configures to enable them checking gcc's version
2888 themselves. Emit make macros for both gcc_version vars.
2889 (topsrcdir): Initialize reliably.
2890 (recursion line): Remove --with-gcc-version=${gcc_version}.
2894 * configure (enable_version_specific_runtime_libs): Implement new flag
2895 --enable-version-specific-runtime-libs which installs C++ runtime stuff
2896 in $(libsubdir); emit definition in each generated Makefile.
2897 (gxx_include_dir): Initialize depending on
2898 $enable_version_specific_runtime_libs.
2902 * configure (gcc_version): Initialize properly depending on
2903 how and where configure is started.
2904 (recursion line): Pass a --with-gcc-version=${gcc_version}
2905 to configures in subdirs.
2909 * configure.in (noconfigdirs): Add configure pattern for mips tx39
2914 * configure.in: Add cygmon and libstub support for mn10200.
2918 * configure (gcc_version): Add new variable describing the
2919 particular gcc version we're building.
2920 * Makefile.in (libsubdir): Add new macro for the directory
2921 in which the compiler finds executables, libraries, etc.
2922 (BASE_FLAGS_TO_PASS): Pass down gcc_version, target_alias
2927 * Makefile.in (local-clean): Remove *.log.
2928 (warning.log): Built with warn_summary from build.log.
2929 (mail-report.log): Run test_summary.
2930 (mail-report-with-warnings.log): Run test_summary including
2931 warning.log in the report.
2935 * config.guess: Detection of Pentium II for *-sco-3.2v5*.
2939 * Makefile.in (grep): Grep no longer depends on libiberty.
2943 * Makefile.in: all-snavigator needs all-libgui.
2947 * configure.in: Add cygmon and libstub support for mn10300.
2951 * missing: Update to version from automake 1.3.
2953 * ltmain.sh: On installation, don't get confused if the same name
2954 appears more than once in the list of library names.
2958 * config.sub: Accept m68060 and m5200 as CPU names.
2962 * configure: Use && rather than using -a in test, because odd
2963 strings can confuse test.
2964 * configure.in: Likewise.
2968 * ltconfig, ltmain.sh: Bring in Visual C++ support.
2972 * Makefile.in (boostrap2-lean, bootstrap3-lean,
2973 bootstrap4-lean): New targets.
2977 * mpw-* Delete. Not used.
2981 * COPYING.LIB: Update FSF address.
2985 * ltconfig, ltmain.sh: Update to libtool 1.2a.
2987 * Makefile.in (GASB_SUPPORT_DIRS): Remove intl; already included via
2992 * ltconfig, ltmain.sh: Avoid producing a version number if
2993 -version-info was not used.
2997 * configure.in: Add --with-newlib to CONFIG_ARGUMENTS if we are
2998 building with newlib.
3002 * Makefile.in (EXTRA_GCC_FLAGS): Remove backslash at end;
3003 Solaris `make' causes it to continue to next definition.
3007 * Makefile.in (install-gdbtk): Call this 'install-gdb' so that
3008 the right GUI libraries and files are installed along with GDB.
3012 * configure.in: Change alpha to alpha* in several places.
3016 * config.sub: Recognize sparc86x.
3020 * configure.in (--enable-target-optspace): Remove debug echo.
3024 * configure: Set CXXFLAGS from CXXFLAGS, not CFLAGS.
3028 * ltconfig: Update cygwin32 support.
3030 * Makefile.in (GAS_SUPPORT_DIRS): Add intl.
3031 (BINUTILS_SUPPORT_DIRS, GASB_SUPPORT_DIRS): Likewise.
3032 (GDB_SUPPORT_DIRS): Likewise.
3036 * configure.in (target_makefile_frag): If --enable-target-optspace,
3037 use -Os to compile target libraries rather than -O2. Default to
3038 using -Os for d10v and m32r if --{enable,disable}-target-optspace is
3040 * configure.in (target_cflags): Ditto for d30v.
3044 * Makefile.in (all-bfd): Depend on all-intl.
3045 (all-binutils): Likewise.
3046 (all-gas): Likewise.
3047 (all-gprof): Likewise.
3052 * configure.in (host_tools): Fix typo, lbtool -> libtool.
3056 * Makefile.in (all-bfd): Depend upon all-libiberty.
3058 * ltconfig, ltmain.sh: Bring in newer cygwin32 support.
3062 * Makefile.in: Add libstub.
3064 * configure.in: Ditto. Build libstub for targets that have cygmon
3069 * configure.in: Don't set PICFLAG on ix86-cygwin32.
3073 * configure.in: Recognise i[3456]96-*-sysv5* as a valid host, and
3074 use mh-sysv5 if specified. Support gprof on SCO Open Server.
3078 * configure: Define DEFAULT_M4 by searching PATH.
3079 * Makfile.in: Use DEFAULT_M4.
3083 * ltconfig: Add cygwin32 support.
3085 * Makefile.in, configure.in: Add libtool as a native only directory
3086 to configure and build.
3090 * Makefile.in (INSTALL_MODULES): Remove texinfo.
3094 * Makefile.in (EXTRA_GCC_FLAGS): XFOO lines shortened.
3098 * Makefile.in: add ash make rules
3099 * configure.in: add ash to native_only and host_tools lists
3103 * Makefile.in (all-gettext, all-intl): New targets.
3104 (ALL_MODULES): Added all-gettext, all-intl.
3105 (CROSS_CHECK_MODULES): Added check-gettext, check-intl.
3106 (INSTALL_MODULES): Added install-gettext, install-intl.
3107 (CLEAN_MODULES): Added clean-gettext, clean-intl.
3109 * configure.in (host_tools): Added gettext.
3110 (native_only): Likewise.
3111 (noconfigdirs) [various cases]: Likewise.
3112 (host_libs): Added intl.
3116 * configure: Do not disable building gdbtk for cygwin32 hosts.
3120 * configure.in: Add thumb-coff target.
3121 * config.sub: Add thumb-coff target.
3125 * Makefile.in: Revert yesterday's change.
3126 (all-target-winsup): all-target-librx stays out of here.
3130 * Makefile.in (TARGET_CONFIGDIRS, ALL_TARGET_MODULES,
3131 CONFIGURE_TARGET_MODULES, CHECK_TARGET_MODULES,
3132 INSTALL_TARGET_MODULES, CLEAN_TARGET_MODULES, all-target-winsup):
3133 Remove references to librx and libg++.
3137 * Makefile.in (BASE_FLAGS_TO_PASS): Pass $(lispdir) down to
3142 * Makefile.in (CC_FOR_TARGET): Use $(TARGET_SUBDIR) when passing -B
3143 for newlib directory.
3144 (CXX_FOR_TARGET): Likewise.
3148 * ltconfig: Update after libtool/ltconfig.in change for
3153 * ltconfig, ltmain.sh: Update to libtool 1.2.
3157 * Makefile.in (install-gcc): Don't specify LANGUAGES here.
3158 (install-gcc-cross): Instead, override LANGUAGES here.
3162 * Makefile.in ($(CONFIGURE_TARGET_MODULES)): Set CONFIG_SITE to a
3163 non-existent file since /dev/null loses with bash 2.0/autoconf 2.12.
3167 * configure.in: Add Thumb-pe target.
3171 * Makefile.in - changed sn targets to snavigator
3172 * configure.in - changed sn targets to snavigator
3176 * config-ml.in: After building symlink tree call make distclean
3177 if a Makefile got linked into ${ml_dir}/${ml_libdir}; this happens
3178 to be the case for libiberty.
3182 * configure: When making link, also check the current
3183 directory. The configure scripts may create one.
3187 * config.sub: Accept alphapca56 and alphaev6 properly.
3191 * configure.in: Revert 3 Jan change for powerpc-linux-gnulibc1.
3195 * config.sub (sco5): Fix typo.
3199 * Makefile.in (INSTALL_MODULES): Move install-tcl before
3201 (install-itcl): Remove dependency on install-tcl.
3205 * configure.in: Remove libgloss from noconfigdirs for MN10300.
3209 * configure.in: Don't build libgui for a cygwin32 target when not on
3214 * configure (redirect): Set to null, so default behavior of
3215 configure is now --verbose.
3219 * Makefile.in ($(CONFIGURE_TARGET_MODULES)): Run configure with
3220 CONFIG_SITE=/dev/null to forestall lossage with site configuration.
3224 * Makefile.in (BASE_FLAGS_TO_PASS, EXTRA_TARGET_FLAGS): Really add
3225 this change to sync Makefile.in with its ChangeLog entries.
3229 * ltmain.sh (mkdir): Check that the directory doesn't exist
3230 before we exit with error, so that we don't get races during
3235 * ltconfig, ltmain.sh: Update from libtool 1.0i.
3239 * Makefile.in (BASE_FLAGS_TO_PASS): Don't pass PICFLAG and
3241 (EXTRA_TARGET_FLAGS): Don't pass PICFLAG_FOR_TARGET.
3243 * configure: Emit a definition for the new macro enable_shared
3246 * config/mh-sparcpic (PICFLAG): Define to properly according
3247 to current multilib configuration.
3248 * config/mt-sparcpic (PICFLAG_FOR_TARGET): Define to properly
3249 according to current multilib configuration.
3253 * configure.in (host_tools, native_only): Add libtool.
3257 * configure.in: add target-gperf to noconfigdirs for Cygwin32.
3258 Fix typo in ming config comment.
3262 * ltconfig, ltmain.sh: Update from libtool 1.0h.
3266 * config.sub: Add tic30 cases, and map c30 to tic30.
3270 * Makefile.in (TARGET_CONFIGDIRS): Add libf2c.
3271 (ALL_TARGET_MODULES, CONFIGURE_TARGET_MODULES): Similarly
3272 (CHECK_TARGET_MODULES, INSTALL_TARGET_MODULES): Similarly
3273 (CLEAN_TARGET_MODULES): Similarly
3274 (all-target-libf2c): Add dependences.
3275 * configure.in (target_libs): Add libf2c.
3279 * configure.in: Remove expect from noconfigdirs when target
3280 is cygwin32. OK to build expect and dejagnu with Canadian
3285 * configure.in: Do build expect, dejagnu, and cvssrc for a cygwin32
3288 * config.guess: Use ${UNAME_MACHINE} rather than i386 for cygwin32
3293 * Makefile.in (BASE_FLAGS_TO_PASS): Remove passing $(local_prefix)
3294 here as it is not defined in the toplevel Makefile.
3298 * configure (package_makefile_rules_frag): New variable, which names
3299 a file with generic rules, ...
3300 Change comment to mention we now have FIVE parts.
3301 * configure: Undo last change.
3305 * config.guess: More accurate determination of HP processor types.
3306 * config.sub: More accurate determination of HP processor types.
3310 * configure (package_makefile_frag): Move inserting the
3311 ${package_makefile_frag} to where it should be according
3316 * config.guess: Add support for Linux/ARM.
3320 * .cvsignore: Remove *-info and *-install since they match
3321 release-info and mpw-install, which we don't want to just ignore.
3325 * configure.in: Revert 3 Jan change for alpha-linux-gnulibc1.
3329 * Makefile.in (FLAGS_TO_PASS): Pass down gcc_include_dir and
3330 local_prefix to sub-make invocations.
3334 * configure.in: Check makefile fragments in the source
3339 * configure.in: Check whether host and target makefile
3340 fragments exist before adding them to *_makefile_frag.
3344 * configure.in (target_configdirs): Add cygmon for sparc64-elf.
3348 * configure.in: Make sure we only replace RPATH_ENVVAR on
3349 lines which begin with RPATH_ENVVAR, i.e. add "^" to the
3352 * Makefile.in (BASE_FLAGS_TO_PASS): Pass RRPATH_ENVVAR down
3357 * config-ml.in (multi-do): LDFLAGS must include multilib
3362 * config.guess: Recognize i[3456]-i586-UnixWare7-sysv5.
3366 * config.sub: Add mingw32 support.
3367 * configure.in: Likewise.
3368 * config/mh-mingw32: New file.
3372 * configure.in: Finalize support for {alpha|powerpc}*-*-linux-gnulibc1
3376 * Makefile.in (INSTALL_TARGET): Do install-gcc first.
3377 * configure (gxx_include_dir): Provide a definition for subdirs
3378 which do not use autoconf.
3382 * config.guess: Sync with egcs. Picks up new alpha support,
3383 BeOS & some additional linux support.
3387 * config.guess: HP 9000/803 is a PA1.1 machine.
3391 * configure.in: It's alpha*-...
3395 * configure.in (host_makefile_frag, target_makefile_frag):
3396 Handle multiple config files.
3397 (alpha-*-linux*): Treat alpha-*-linux* as alpha-*-linux* and
3406 * configure.in (d30v-*-*): Allow configuring of libide, vmake, etc.
3410 * Makefile.in: Add libgui directory.
3411 (GDB_TK): Add all-libgui.
3412 * configure.in: Add libgui directory.
3413 * configure: Add all-libgui to GDB_TK.
3417 * config-ml.in (multidirs): Add m32r to multilib list.
3421 * Makefile.in (all-target-gperf): Change dependency to
3422 all-target-libstdc++.
3426 * config.guess: Add BeOS support.
3430 Source directory cvs renamed to cvssrc:
3431 * configure.in (host_tools): Change cvs to cvssrc.
3432 (native_only): Likewise.
3433 (noconfigdirs) [various cases]: Likewise.
3434 * Makefile.in (ALL_MODULES): Change all-cvs to all-cvssrc.
3435 (CROSS_CHECK_MODULES): Change check-cvs to check-cvssrc.
3436 (INSTALL_MODULES): Change install-cvs to install-cvssrc.
3437 (CLEAN_MODULES): Change clean-cvs to clean-cvssrc.
3438 (all-cvssrc): Rename target from all-cvs.
3442 * configure (gxx_include_dir): Fix thinko.
3446 * Makefile.in (INSTALL_TARGET_CROSS): Define.
3447 (install-cross, install-gcc-cross): New targets.
3451 * configure.in (noconfigdirs): Add support for Thumb target.
3453 * config.sub (maybe_os): Add support for Thumb target.
3457 * Makefile.in: Add rules for cygmon.
3459 * configure.in: Build cygmon for sparc-elf and sparclite-aout.
3463 * Makefile.in (INSTALL_TARGET): Do install-gcc first.
3464 * configure (gxx_include_dir): Provide a definition for subdirs
3465 which do not use autoconf.
3469 * Makefile.in, configure, configure.in, ChangeLog: merge with foundry's
3475 * config.guess (powerpc*-*-linux): Handle glibc2 beta release
3476 found on RedHat Linux systems.
3480 * config.guess (alpha stuff): Merge with FSF to avoid incorrect
3485 * configure.in (i[3456]86-ncr-sysv4.3*): Tweak.
3489 * ltmain.sh: If mkdir fails, check whether the directory was created
3490 anyhow by some other process.
3494 * configure.in (d30v-*-*): Configure all directories.
3498 * configure.in (d30v-*-*): Configure newlib, libiberty directories
3503 * configure.in (d30v-*-*): Configure target-libgloss on the D30V.
3507 * include/libiberty.h: Add extern "C" { so it can be used with C++
3509 * include/remote-sim.h: Add extern "C" { so it can be used with C++
3514 * configure.in (d30v-*-*): Configure GCC now.
3518 * configure.in: Remove a "second pass" of tweaking noconfigdirs,
3519 is no longer needed.
3523 * Makefile.in: check-target-libio depends on all-target-libstdc++.
3527 * Makefile.in (bootstrap-lean): Combined with `normal' bootstrap
3528 targets using "$@" to provide support for similar but not identical
3529 targets without having to duplicate code.
3533 * makefile.vms: Fix to work with DEC C.
3537 * config.sub: Add mips-tx39-elf to marketing names.
3541 * ltmain.sh: Handle symlinks in generated script.
3545 * configure: Handle autoconf style directory options: --bindir,
3546 --datadir, --includedir, --infodir, --libdir, --libexecdir,
3547 --mandir, --oldincludedir, --sbindir, --sharedstatedir,
3549 * Makefile.in (sbindir, libexecdir, sysconfdir): New variables.
3550 (sharedstatedir, localstatedir, oldincludedir): New variables.
3551 (BASE_FLAGS_TO_PASS): Pass down bindir, datadir, includedir,
3552 infodir, libdir, libexecdir, localstatedir, mandir, oldincludedir,
3553 sbindir, sharedstatedir, and sysconfdir.
3557 * Makefile.in (bootstrap-lean): New target.
3561 * configure.in (d30v): Remove tcl, tk, expect, gdb, itcl, tix, db,
3562 sn, and gnuserv from noconfigdirs.
3566 * ltmain.sh: Tweak shell pattern to avoid bug in NetBSD /bin/sh.
3570 * Makefile.in (cross): New target.
3575 * Makefile.in (bootstrap2, bootstrap3): New targets.
3576 (all-bootstrap): Remove outdated and confusing target.
3577 (bootstrap, bootstrap2, bootstrap3): Don't pass BOOT_CFLAGS down.
3581 * configure (tooldir): enable_gdbtk=YES for cygwin32, NO for
3582 windows. Consistent with gdb/configure.
3586 * config/mt-linux: Define CXXFLAGS to make sure -fvtable-thunks is
3588 * configure.in: Name Linux target fragment.
3590 * configure: Rewrite so that project Makefile fragment is inserted
3591 first and appears last in the resulting Makefile.
3595 * Makefile.in (install-itcl): Install tcl first.
3599 * config/mh-cygwin32: ok to build split texinfo files
3603 * configure.in: remove bison from noconfigdirs for Cygwin32 host
3607 * Makefile.in (local-distclean): Also remove mh-frag mt-frag.
3609 * configure.in (skipdirs): Add target-librx for Linux.
3610 (alpha-*-linux*): Use config/mh-elfalphapic and config/mt-elfalphapic.
3614 * Makefile.in (bootstrap): New target.
3618 * config.sub: Accept 'amigados' for backward compatability.
3622 * config.guess: Merge with FSF.
3626 * config.sub: Change 'amigados' to 'amigaos' to match current usage.
3630 * config.sub: Add "marketing-names" patch.
3634 * configure.in (*-*-rtems*): Do not build libgloss for rtems.
3638 * config.sub: Handle v850-elf.
3642 * .cvsignore (*-install): Remove.
3646 * ltconfig: Set CONFIG_SHELL in libtool.
3647 * ltmain.sh: Use CONFIG_SHELL instead of /bin/sh
3651 * configure.in (target_subdir): Set to libraries if enable_multilib.
3655 * config.guess: Update from gcc directory.
3659 * Makefile.in (all-sim): Depends on all-readline.
3663 * Makefile.in (BISON, YACC): Use $$s.
3664 (all-bison): Depend on all-texinfo.
3668 * Makefile.in (BISON): Add -L flag.
3673 * configure.in (noconfigdirs): Add support for v850e target.
3675 * config.sub (maybe_os): Add support for v850e target.
3679 * configure.in (noconfigdirs): Add support for v850ea target.
3681 * config.sub (maybe_os): Add support for v850ea target.
3685 * config.sub: Add mipstx39. Delete r3900.
3689 * Makefile.in (all-autoconf): Depends on all-texinfo.
3693 * config-ml.in ({powerpc,rs6000}*-*-*): Update to current AIX and
3698 * configure: Get CFLAGS and CXXFLAGS from Makefile, if possible.
3700 * configure: When handling a Canadian Cross, handle YACC as well as
3701 BISON. Just set BISON to bison. When setting YACC, prefer bison.
3702 * Makefile.in (all-bison): Depend upon all-texinfo.
3706 * Makefile.in (BISON): bison, not byacc or bison -y.
3707 (YACC): bison -y or byacc or yacc.
3708 (various): Add *-bison as appropriate.
3709 (taz): No need to mess with BISON anymore.
3713 * configure: If OSTYPE matches *win32*, try to find a good value for
3718 * Makefile.in (taz): Get the version number from AM_INIT_AUTOMAKE in
3719 configure.in if it is present.
3723 * Makefile.in (LD_FOR_TARGET): Change ld.new to ld-new.
3727 * config.sub: Recognize `arc' cpu.
3728 * configure.in: Likewise.
3729 * config-ml.in: Likewise.
3733 * Makefile.in ($(INSTALL_X11_MODULES)): Depend upon installdirs.
3737 * configure: Changed sed delimiter from ':' to '|' when
3738 attempting to substitute ${config_shell} for SHELL. On
3739 NT ${config_shell} may contain a ':' in it.
3743 * Makefile.in (EXTRA_GCC_FLAGS): Fix for non-bash shells.
3747 * Makefile.in (AS_FOR_TARGET): Change as.new to as-new.
3751 * Makefile.in (NM_FOR_TARGET): Change nm.new to nm-new.
3753 * ylwrap: If the program is a relative path, force it to be
3758 * configure (tooldir): Set BISON to `bison -y' and not just bison.
3762 * Makefile.in (CC_FOR_TARGET): When winsup/Makefile present,
3763 correctly specify the target build directory $(TARGET_SUBDIR)/winsup
3768 * Makefile.in (EXTRA_GCC_FLAGS): Fix handling of macros with values
3769 separated by spaces.
3774 * Makefile.in (DEVO_SUPPORT): Add ylwrap.
3776 * ltmain.sh: Handle /bin/sh at start of install program.
3778 * Makefile.in (DEVO_SUPPORT): Add ltconfig, ltmain.sh, and missing.
3780 * ltconfig, ltmain.sh: New files, from libtool 1.0.
3781 * missing: New file, from automake 1.2.
3785 * Makefile.in: Treat tix like tk, putting it in X11_MODULES. Add
3786 check-tk to CHECK_X11_MODULES.
3790 * config.sub: Merge with FSF.
3794 * config.guess: Merge with FSF.
3798 * configure: Treat msdosdjgpp like go32.
3799 * configure.in: Likewise. Don't remove gprof for go32.
3801 * configure: Change Makefile.tem2 to Makefile.tm2.
3805 * configure.in (noconfigdirs): For alpha-dec-osf*, don't ignore grep.
3809 * install-sh (chmodcmd): Set to null if the DST directory already
3810 exists. Same as Nov 11th change.
3814 * configure (GDB_TK): Needs itcl and tix.
3818 * config.guess: Update from FSF.
3822 * Makefile.in (GDB_TK): Depend on itcl and tix.
3826 * Makefile.in (INSTALL_PROGRAM_ARGS): New variable.
3827 (INSTALL_PROGRAM): Use $(INSTALL_PROGRAM_ARGS).
3828 (INSTALL_SCRIPT): New variable.
3829 (BASE_FLAGS_TO_PASS): Pass down INSTALL_SCRIPT.
3830 * configure.in: If host is *-*-cygwin32*, set INSTALL_PROGRAM_ARGS
3832 * install-sh: Add support for -x option.
3836 * configure.in, Makefile.in: Treat tix like itcl.
3840 * Makefile.in (WINDRES): New variable.
3841 (WINDRES_FOR_TARGET): New variable.
3842 (BASE_FLAGS_TO_PASS): Add WINDRES_FOR_TARGET.
3843 (EXTRA_HOST_FLAGS): Add WINDRES.
3844 (EXTRA_TARGET_FLAGS): Add WINDRES.
3845 (EXTRA_GCC_FLAGS): Add WINDRES.
3846 ($(DO_X)): Pass down WINDRES.
3847 ($(CONFIGURE_TARGET_MODULES)): Set WINDRES when configuring.
3848 * configure: Treat WINDRES like DLLTOOL, and WINDRES_FOR_TARGET like
3853 * configure.in: configure sim before gdb for win32-x-ppc
3857 Move gperf into the toplevel, from libg++.
3858 * configure.in (target_tools): Add target-gperf.
3859 (native_only): Add target-gperf.
3860 * Makefile.in (all-target-gperf): New target, depend on
3862 (configure-target-gperf): Empty rule.
3863 (ALL_TARGET_MODULES): Add all-target-gperf.
3864 (CONFIGURE_TARGET_MODULES): Add configure-target-gperf.
3865 (CHECK_TARGET_MODULES): Add check-target-gperf.
3866 (INSTALL_TARGET_MODULES): Add install-target-gperf.
3867 (CLEAN_TARGET_MODULES): Add clean-target-gperf.
3871 * config.sub (mn10200): Recognize new basic machine.
3875 * configure.in: Don't set ENABLE_MULTILIB, so we'll be passing
3876 --enable-multilib down to subdirs; setting TARGET_SUBDIR was enough.
3880 * configure.in: If we're building mips-sgi-irix6* native, turn on
3881 ENABLE_MULTILIB and set TARGET_SUBDIR.
3885 * Makefile.in (all-sn): Depend on all-grep.
3889 * configure.in: Use mh-ppcpic and mt-ppcpic for powerpc*-* targets.
3891 * configure: Set CFLAGS and CXXFLAGS, and substitute them into
3893 * Makefile.in: Add comment for CFLAGS and CXXFLAGS.
3895 * Makefile.in (DISTBISONFILES): Remove.
3896 (taz): Don't futz with DISTBISONFILES. Change BISON to use
3899 * configure.in: Build itl, db, sn, etc., when building for native
3902 * Makefile.in (LD): New variable.
3903 (EXTRA_HOST_FLAGS): Pass down LD.
3904 ($(DO_X)): Likewise.
3908 * Makefile.in (INSTALL): Use $(SHELL) when executing install-sh.
3912 * configure.in (targargs): Strip out any supplied --build argument
3913 before adding our own. Always add --build.
3917 * configure.in (targargs): Pass --build if we're doing
3922 * configure: Use '|' instead of ":" as the separator in
3923 sed. Otherwise sed chokes on NT path names with drive
3924 designators. Also look for "?:*" as the leading characters in an
3929 * config.sub: Support for r3900.
3933 * configure.in: Use install-sh, not install.sh.
3937 * Makefile.in (taz): Improve check for BISON so it doesn't try to
3942 * Makefile.in (INSTALL_MODULES): Put install-opcodes before
3947 * Makefile.in: Add automake targets.
3948 * configure.in (host_tools): Add automake.
3952 * configure: Default CXX to c++, not gcc.
3953 * Makefile.in (CXX): Set to c++, not gcc.
3954 (CXX_FOR_TARGET): When cross, transform c++, not gcc.
3958 * install-sh: try appending a .exe if source file doesn't
3963 * configure.in: Turn on multilib by default.
3964 (cross_only): Remove target-libiberty.
3966 * Makefile.in (all-gcc): Don't depend on libiberty.
3970 * config.guess: improve algorithm for recognizing Gnu Hurd x86.
3974 * Makefile.in (DEVO_SUPPORT): Add mpw-install.
3975 (DISTBISONFILES): Add ld/Makefile.in
3979 * configure.in: if target is cygwin32 but host isn't cygwin32,
3980 don't configure gdb tcl tk expect, not just gdb.
3984 * configure.in: Added gnuserv everywhere sn appears.
3986 * Makefile.in (ALL_MODULES): Added all-gnuserv.
3987 (CROSS_CHECK_MODULES): Added check-gnuserv.
3988 (INSTALL_MODULES): Added install-gnuserv.
3989 (CLEAN_MODULES): Added clean-gnuserv.
3990 (all-gnuserv): New target.
3994 * config.guess: Fixes for MIPS OpenBSD systems.
3998 * Makefile.in (INSTALL_XFORM): Remove.
3999 (BASE_FLAGS_TO_PASS): Remove INSTALL_XFORM.
4001 * mkinstalldirs: New file, copied from automake.
4002 * Makefile.in (installdirs): Rename from install-dirs. Use
4003 mkinstalldirs. Change all users.
4004 (DEVO_SUPPORT): Add mkinstalldirs.
4008 * install-sh: Rename from install.sh.
4009 * Makefile.in (INSTALL): Change install.sh to install-sh.
4010 (DEVO_SUPPORT): Likewise.
4012 * configure: Use ${config_shell} with ${moveifchange}. From Thomas
4017 * config.guess: Recognize OpenBSD systems correctly.
4021 * README, Makefile.in (ETC_SUPPORT): Remove references to
4022 cfg-paper*, configure.{texi,man,info*}._
4026 * Makefile.in (all.normal): Ensure that gcc is built after all
4027 the x11 - ie gdb - targets.
4031 * makefile.vms: Don't run conf-a-gas.
4035 * configure.in (hppa1.1-*-rtems*): New target, like hppa-*-*elf*.
4039 * configure.in: Remove noconfigdirs case since gdb also
4040 configures and builds for tic80-coff.
4044 * configure: Set cache_file to config.cache.
4045 * Makefile.in (local-distclean): Remove config.cache.
4049 * COPYING: Update FSF address.
4053 * configure.in (tic80-*-*): Remove G++ libraries and libgloss from
4058 * Makefile.in (install-dirs): Don't crash if prefix, and hence
4063 * config.sub: Tweak mn10300 entry.
4067 * configure.in (host_tools): Put sim before gdb, so gdb's
4068 configure.tgt can determine if the simulator was configured.
4072 * config.sub: Move BeOS $os case to be with other Cygnus
4077 * config.sub: Remove misplaced comment that broke Linux.
4081 * config.sub: Add BeOS support.
4085 * Makefile.in (CHECK_X11_MODULES): Don't run check-tk.
4089 * configure.in (noconfigdirs): Remove tcl and tk from
4090 noconfigdirs for cygwin32 builds.
4094 * configure.in (tic80-*-*): Remove ld from noconfigdirs.
4098 * Makefile.in (GAS_SUPPORT_DIRS, BINUTILS_SUPPORT_DIRS): Remove
4099 make-all.com, use makefile.vms instead.
4103 * config.sub: Accept -lnews*.
4107 * configure.in (noconfigdirs): Disable target-newlib,
4108 target-examples and target-libiberty for d30v.
4112 * configure.in (noconfigdirs): Enable ld for d30v.
4116 * configure.in (tic80-*-*): Build compiler.
4120 * configure.in (d30v-*): Remove sim directory from list of
4121 unsupported d30v directories
4125 * config.sub, configure.in: Add d30v target cpu.
4129 * makefile.vms: New file.
4130 * make-all.com: Remove.
4134 * Makefile.in (EXTRA_GCC_FLAGS): Add LIBGCC2_DEBUG_CFLAGS.
4138 * Makefile.in (all-itcl): The rule is all-itcl, not all-tcl.
4142 * Makefile.in (ALL_MODULES): Added all-db.
4143 (CROSS_CHECK_MODULES): Addec check-db.
4144 (INSTALL_MODULES): Added install-db.
4145 (CLEAN_MODULES): Added clean-db.
4149 * config.guess: Merge with latest FSF sources.
4153 * Makefile.in (ALL_MODULES): Added all-itcl.
4154 (CROSS_CHECK_MODULES): Added check-itcl.
4155 (INSTALL_MODULES): Added install-itcl.
4156 (CLEAN_MODULES): Added clean-itcl.
4160 * configure.in: build gdb for mn10200
4164 * Makefile.in (all-target-winsup): Depend on all-target-libio.
4168 * configure.in (tic80-*-*): Turn off most targets right now.
4172 * Makefile.in (MAKEINFO): Check for the existence of the Makefile,
4173 rather than the makeinfo program.
4174 (do-info): Depend upon all-texinfo.
4178 * configure.in: Remove uses of config/mh-linux.
4180 * config.sub, config.guess: Merge with latest FSF sources.
4184 * config.sub (case $basic_machine): Add tic80 entries.
4188 * config.sub, config.guess: Merge with latest FSF sources.
4192 * mpw-build.in: Build ld before gcc, use NewFolderRecursive.
4193 * mpw-config.in: Test for NewFolderRecursive.
4194 * mpw-install: Use symbolic name for startup filename.
4195 * mpw-README: Add various additional details.
4199 * configure.in (mips*-sgi-irix6*): Remove binutils from noconfigdirs.
4203 * configure.in: Do build gcc and the target libraries for
4208 * configure.in: don't avoid building gdb for mn10300 any more
4209 * Makefile.in: double-quote GCC_FOR_TARGET line in EXTRA_GCC_FLAGS
4210 instead of single-quoting it.
4214 * configure.in: Don't use --with-stabs on IRIX 6.
4218 * configure.in (m32r): Build gdb, libg++ now.
4222 * configure.in (mips*-sgi-irix6*): Remove gdb and related
4223 directories from noconfigdirs.
4227 * config.sub (basic_machine): added mips16 configuration
4231 * config.sub: Handle d10v-unknown.
4235 * config.sub: Handle v850-unknown.
4239 * Makefile.in: add findutils
4240 * configure.in: add findutils to list of host_tools
4244 * config.sub: Handle mn10200 and mn10300.
4248 * configure.in (d10v-*): Do not build librx.
4252 * configure.in (mn10300): Build everything except gdb & libgloss.
4256 * config.guess: Patch for Dansk Data Elektronik servers,
4259 For ncr, use /bin/uname rather than uname, since GNU uname does not
4262 Patch for MIPS R4000 running System V,
4265 Fix thinko for nextstep.
4270 * config.guess: Guess mips-dec-mach_bsd4.3.
4273 * config.guess (i?86-ncr-sysv*): Emit just enough of the minor
4275 * config.guess (mips-mips-riscos*): Emit just enough of the
4279 * config.guess (sparc-auspex-sunos*): Added.
4280 (f300-fujitsu-*): Added.
4283 * config.guess: Recognize a Tadpole as a sparc.
4287 * config.guess: Don't assume that NextStep version is either 2 or
4288 3. NextStep 4 (aka OpenStep 4) has come out now.
4292 * config.guess: Support Cray T90 that reports itself as "CRAY TS".
4297 * config.sub: Contributions from bug-gnu-utils to:
4298 Support plain "hppa" (no version given) architecture, reported by
4300 OpenBSD like NetBSD.
4301 LynxOs is not a hardware supplier.
4303 * config.guess: Contributions from bug-gnu-utils to add support for:
4304 OpenBSD like NetBSD.
4306 More Pyramid systems.
4307 i[n>4]86 Intel chips.
4308 M680[n>4]0 Motorola chips.
4309 Use unknown instead of lynx for hardware manufacturer.
4313 * install.sh (chmodcmd): Set to null if the DST directory already
4318 * configure.in (powerpc*-{eabi,elf,linux,rtem,sysv,solaris}*): Do
4319 not use mt-ppc target Makefile fragment any more.
4323 * configure.in (*-*-windows): Exclude everything but those dirs
4324 needed to build windows.
4328 * Makefile.in (all-target-winsup): Depend on all-target-librx.
4332 * configure.in: Exclude mmalloc from i386-windows.
4333 * config/mh-windows: Add rules for building MSVC makefiles.
4337 * Undo my previous change.
4341 * Makefile.in (EXTRA_GCC_FLAGS): Pass down GCC_FOR_TARGET
4343 (MAKEOVERRIDES): Define (revert this part of October 18 change).
4347 * Makefile.in (FLAGS_TO_PASS): Add $(HOST_FLAGS) to allow the
4348 host to add it's own flags.
4349 * config/mh-windows (HOST_FLAGS): Set srcroot, which is needed
4350 for MSVC build procedure.
4354 * configure: Handle GCC_FOR_TARGET like CC_FOR_TARGET.
4358 * Makefile.in (CC_FOR_TARGET): Check for xgcc, not Makefile.
4359 (CXX_FOR_TARGET): Likewise.
4360 (GCC_FOR_TARGET): Define.
4361 (BASE_FLAGS_TO_PASS): Remove GCC_FOR_TARGET.
4362 (EXTRA_GCC_FLAGS): Define GCC_FOR_TARGET based on whether
4363 CC_FOR_TARGET was specified on the command line.
4364 (MAKEOVERRIDES): Don't define.
4368 * configure.in (m32r): Fix spelling of libg++ libs.
4372 * config.sub (-apple*): Remove, now redundant.
4376 * configure: Don't get confused by CPU-VENDOR-linux-gnu.
4378 * configure: Rework yesterday's sed script patch.
4380 * config.sub: Merge with FSF.
4384 * config.guess: Merge from FSF.
4387 * config.guess: Use pc instead of unknown, for pc clone systems.
4388 Change linux to linux-gnu.
4391 * config.guess: Avoid non-portable tr syntax.
4395 * test-build.mk (HOLES): Add "xargs" for gdb.
4397 * configure: Avoid hpux10.20 sed bug.
4401 * configure.in config/mh-windows: Add support for windows host
4402 (that is a build done under the Microsoft build environment).
4406 * Makefile.in: Replace all uses of srcroot with s, to shrink
4407 command line lengths.
4410 * configure.in: If configuring for newlib, pass --with-newlib to
4412 * Makefile.in (CC_FOR_TARGET): If winsup/Makefile exists, pass a
4413 -Bnewlib/ and -Lwinsup to gcc.
4414 (CXX_FOR_TARGET): Likewise.
4418 * Makefile.in (ETC_SUPPORT): Add configure.
4422 * configure.in: Use config/mh-dgux386 for i[345]86-dg-dgux
4423 host configuration file.
4427 * configure.in: Break mn10x00 support into separate
4428 mn10200 and mn10300 configurations.
4429 * config.sub: Likewise.
4433 * configure.in: Add lots of stuff to noconfigdirs for
4434 the mn10x00 targets.
4436 * config.sub, configure.in: Add mn10x00 support.
4440 * make-all.com: Call conf-a-gas, not config-a-gas.
4444 * configure.in (noconfigdirs): Don't build libgloss for arm-coff
4449 * mpw-README: Add much more detail for native PowerMac.
4450 * mpw-install: New file.
4451 * mpw-configure: Add --norecursion and --help options.
4452 * mpw-config.in: Translate readme and install files when
4454 * mpw-build.in: Don't always depend on byacc and flex.
4455 (install-only-top): New action.
4459 * configure.in: You can now configure GDB for the v850.
4463 * configure.in (noconfigdirs): Don't configure any C++ dirs
4468 * config.sub: Recognize mips64vr5000.
4472 * configure.in: Use a single line for host_tools and native_only.
4476 * Makefile.in (install-itcl): Install tcl first.
4480 * config/mh-cygwin32: ok to build split texinfo files
4484 * configure.in: remove bison from noconfigdirs for Cygwin32 host
4488 * config.sub, configure.in: Add entries for m32r.
4492 * config.guess: Merge with FSF.
4496 * Makefile.in (inet-install): Don't run install-gzip.
4500 * configure.in: Don't config lots of things for *-*-windows*.
4504 * mpw-config.in: Test for mpw-true, true, and null-command scripts.
4505 (host_libs, host_tools): Copy from configure.in.
4506 * mpw-configure: Don't complain about directories not found.
4510 * configure.in (i[345]86): Recognize i686 for pentium pro.
4511 (i[3456]86-*-dgux*): Use config/mh-sysv for the host configuration
4514 * config.guess (i[345]86): Ditto.
4518 * configure.in (noconfigdirs): Removed gdb for D10V.
4522 * configure.in: Remove ld, target-libio, target-libg++, and
4523 target-libstdc++ from noconfigdirs.
4527 * configure: Fix three locations where shell scripts were
4528 being run directly rather than with config_shell.
4532 * configure.in (v850-*-*): Set up initial $noconfigdirs.
4533 * config.sub (basic_machine): Recognize v850.
4537 * mpw-configure: Handle multiple enable/disable options and
4538 pass them down recursively, handle -c and -s flags appropriately
4539 depending on choice of compiler, add escape mechanism for
4540 quoted arguments to gC.
4544 * configure.in (powerpc*-*-*): For eabi, system V.4, Linux, and
4545 solaris targets, use config/mt-ppc to set C{,XX}FLAGS_FOR_TARGETS
4546 so that -mrelocatable-lib and -mno-eabi are used.
4548 * Makefile.in (CONFIGURE_TARGET_MODULES): If target compiler does
4549 not support --print-multi-lib, don't abort.
4553 * config/mh-cygwin32 (CFLAGS): Define _WIN32 to be compatible
4554 with normal Windows compilation environment.
4558 * make-all.com: Run config-a-gas.
4559 * setup.com: Don't copy subdirectory files around.
4563 * configure.in (*-*-ose): Remove exclusion of libgloss for this
4564 target, it now compiles correctly.
4568 * mpw-config.in: Generate Mac include for elf/dwarf2.h.
4572 * configure.in (d10v-*-*): Remove ld from $noconfigdirs.
4576 * configure.in (native_only): Add prms.
4580 * Makefile.in (GAS_SUPPORT_DIRS): Add make-all.com and setup.com.
4581 (BINUTILS_SUPPORT_DIRS): Likewise.
4585 * configure.in (d10v-*-*): Don't configure ld or gdb until the
4586 d10v support is added.
4590 * configure.in (d10v-*-*): New target.
4594 * config.guess (HP 9000/811): Recognize this as a PA1.1
4599 * Makefile.in (do-tar-gz): New target, split out from tail end of
4600 taz target. Run each command separately, don't use pipes.
4605 * mpw-configure: Look for g-mpw-make.sed in config/mpw.
4606 * mpw-build.in: No builds should depend on building byacc or flex,
4607 they are assumed to be installed already.
4611 * Makefile.in (CONFIGURE_TARGET_MODULES): Set r environment
4612 variable that CC_FOR_TARGET needs.
4616 * Makefile.in (CONFIGURE_TARGET_MODULES): Determine if the multlib
4617 options have changed since the last time the subdirectory was
4618 configured, and if it has, reconfigure.
4619 (CLEAN_TARGET_MODULES): Delete multilib.out and tmpmulti.out, which
4620 CONFIGURE_TARGET_MODULES uses to remember the old multilib options.
4624 * Makefile.in (ALL_MODULES,CROSS_CHECK_MODULES,INSTALL_MODULES,
4625 CLEAN_MODULES): Add bash.
4626 (all-bash): New target.
4630 * configure.in (mips-sgi-irix6*): Use mh-irix6 instead of mh-irix5.
4634 * config.sub (basic_machine): Recognize d10v as a valid processor.
4638 * mpw-configure: Add support for --bindir.
4639 * mpw-build.in: Use a GCC-specific build script for GCC actions.
4643 * configure.in: add bash, time, gawk to list of hosttools and things
4644 to only build for native toolchains
4648 * Makefile.in (docdir): Remove.
4652 * Makefile.in (datadir): Set to $(prefix)/share.
4656 * configure.in: build diff and patch for cygwin32-hosted
4661 * config.sub: Accept -rtems*.
4665 * configure.in: enable dosrel for cygwin32-hosted builds,
4666 remove diff from the list of things not buildable
4671 * Makefile.in (TARGET_SUBDIR): Move comment to previous line so we
4676 * configure.in (mips*-sgi-irix6*): Set noconfigdirs appropriately.
4680 * Makefile.in (taz): Handle case where tex3patch didn't even get
4681 checked out. Also, if it was found, put the symlink in a new util
4686 * config.guess (*:Linux:*:*): Add support for PowerPC Linux.
4690 * config.sub: Recognize -openvms.
4691 * configure.in (alpha*-*-*vms*): Set noconfigdirs.
4692 * make-all.com, setup.com: New files.
4696 * Makefile.in (taz): tex3patch moved to texinfo/util.
4700 * configure: enable_gdbtk=no for cygwin32-hosted toolchains
4701 * configure.in: remove make from disable-if-Can-Cross list
4702 enable gdb if ${host} and ${target} are cygwin32
4706 * config.guess (i?86-ncr-sysv*): Emit minor release numbers.
4707 Recognize the NCR 4850 machine and NCR Pentium-based platforms.
4711 * config.guess: Combine mips-mips-riscos cases, and use cpp to
4712 distinguish sysv/svr4/bsd variants.
4717 * configure.in: Added copyright notice.
4718 * move-if-change: Added copyright notice.
4722 * configure.in (powerpcle-*-solaris*): Until we get shared
4723 libraries working, don't build gdb, sim, make, tcl, tk, or
4728 * config.guess: Merge with FSF:
4731 * config.guess (*:Linux:*:*): Add guess for sparc-unknown-linux.
4734 * config.guess (AViiON:dgux:*:*): Fix typo in recognizing mc88110.
4737 * config.guess: Combine two OSF1 rules.
4739 * config.guess (dgux): Use /usr/bin/uname rather than uname,
4744 * Makefile.in (MAKEDIRS): Removed $(tooldir).
4748 * mpw-README: Document GCCIncludes.
4752 * configure.in (alpha-*-linux*): Set enable_shared to yes.
4756 * mpw-configure: Handle --enable-FOO and --disable-FOO.
4760 * configure.in (*-*-cygwin32): Configure make.
4764 * Makefile.in (inet-install): Quote value of INSTALL_MODULES.
4768 * Makefile.in (all-inet): Depend on all-perl.
4770 * Makefile.in (inet-install): New target.
4772 * Makefile.in (all-inet): Depend on all-tcl.
4773 (all-inet): Depend on all-send-pr.
4777 * configure.in (powerpcle-*-solaris*): Turn off tk and tcl
4782 * configure.in: Don't configure --with-gnu-ld on AIX.
4786 * configure.in (powerpcle-*-solaris*): Turn off gdb temporarily.
4790 * Makefile.in (ALL_MODULES): Added all-inet.
4791 (CROSS_CHECK_MODULES): Added check-inet.
4792 (INSTALL_MODULES): Added install-inet.
4793 (CLEAN_MODULES): Added clean-inet.
4794 (all-indent): New target.
4796 * configure.in (host_tools): Added inet.
4797 (native_only): Added inet.
4798 (noconfigdirs): Added inet.
4802 * configure.in: Don't configure libgloss if we are not configuring
4807 * configure.in: Don't configure libgloss for unsupported
4812 * Makefile.in (CLEAN_MODULES): Add clean-apache.
4816 * Makefile.in (ALL_MODULES): Include all-apache.
4817 (CROSS_CHECK_MODULES): Include check-apache.
4818 (INSTALL_MODULES): Include install-apache.
4819 (all-apache): New target.
4821 * configure.in: Added apache everywhere perl is seen.
4825 * Makefile.in: Add support for clean-{module} and
4826 clean-target-{module} rules.
4830 * configure.in (*-*-ose) do not build libgloss.
4834 * config.guess (prep*:SunOS:5.*:*): Turn into
4835 powerpele-unknown-solaris2.
4839 * configure.in: Permit --enable-shared to specify a list of
4844 * configure.in (host==solaris): Pass only the first word of $CC
4845 to /usr/bin/which when checking if we're using /usr/ccs/bin/cc.
4849 * Makefile.in (BASE_FLAGS_TO_PASS): pass down $(MAKE).
4853 * Makefile.in (ALL_MODULES): Include all-perl.
4854 (CROSS_CHECK_MODULES): Include check-perl.
4855 (INSTALL_MODULES): Include install-perl.
4856 (ALL_X11_MODULES): Include all-guile.
4857 (CHECK_X11_MODULES): Include check-guile.
4858 (INSTALL_X11_MODULES): Include install-guile.
4859 (all-perl): New target.
4860 (all-guile): New target.
4862 * configure.in (host_tools): Include perl and guile.
4863 (native_only): Include perl and guile.
4864 (noconfigdirs): Don't build guile and perl; no ports have been
4869 * configure (--enable-*): Handle quoted option lists such as
4870 --enable-sim-cflags='-g0 -O' better.
4874 * Makefile.in ({,inst}all-target): New rule so we can make and
4875 install all of the target directories easily.
4879 * configure.in: Add missing global flag in sed substitution when
4880 deleting `target-' from ${configdirs}.
4884 * Makefile.in (DO_X): Don't get confused if CC contains `=' in an
4887 * configure.in (mips*-nec-sysvr4*): Use a host_makefile_frag of
4890 * install.sh: Correct misspelling of transformbasename.
4892 * config.guess: Recognize mips-*-sysv*.
4896 * config.sub: Recognize mon960.
4900 * configure: Restore Canadian Cross handling of BISON and LEX,
4901 removed in Feb 20 change.
4906 Mention make install. Remove the old copyright date as well the
4907 clumsy and rather pointless copyright on the README file.
4911 * Makefile.in ($(CONFIGURE_TARGET_MODULES)): If there is a
4912 Makefile after running symlink-tree, then run `make distclean' to
4913 avoid clobbering any generated files in srcdir.
4917 * configure.in (m68k-*-netbsd*): Build everything now.
4921 * Makefile.in (taz): Fix quoting.
4925 * configure.in (sparclet-*-*): Build everything now.
4929 * configure.in (m68k-*-linux*): New host.
4933 * configure: Check for bison before byacc.
4937 * Makefile.in configure: Change the way LEX and BISON/YACC are
4938 set. configure now defines DEFAULT_LEX and DEFAULT_YACC by
4939 searching PATH. These are used as fallbacks by Makefile.in if
4940 flex/bison/byacc aren't in objdir.
4944 * Makefile.in: Make everything which depends upon all-bfd also
4945 depend upon all-opcodes, in case --with-commonbfdlib is used.
4949 * configure.in (host *-*-cygwin32): Don't build gdb if we are
4950 building NT native compilers on Unix.
4954 * configure.in: Don't get CC from the host Makefile fragment if we
4955 can find gcc in PATH, or if this is a Canadian Cross. Move the
4956 Solaris test for /usr/ucb/cc to the post target script, just after
4957 the compiler sanity test.
4961 * config.sub: Merge with FSF.
4965 * Makefile.in (RPATH_ENVVAR): New variable.
4966 (REALLY_SET_LIB_PATH): Use it.
4967 * configure.in: On HP/UX, set RPATH_ENVVAR to SHLIB_PATH.
4971 * config.sub, configure.in: Recognize sparclet cpu.
4975 * config.guess: Support m68k-cbm-sysv4.
4979 * config.guess (*:Linux:*:*): Guess m68k-unknown-linux and
4980 m68k-unknown-linuxaout from linker help string. Put quotes around
4985 * config.guess (powerpc-harris-powerunix): Add guess for port
4990 * config.guess (UNAME_VERSION): Recognize X4.x as an OSF version.
4994 * configure.in: If --enable-shared was used, set SET_LIB_PATH to
4995 $(REALLY_SET_LIB_PATH) in Makefile.
4996 * Makefile.in (SET_LIB_PATH): New variable.
4997 (REALLY_SET_LIB_PATH): New variable.
4998 ($(DO_X)): Use $(SET_LIB_PATH).
4999 (install.all, gcc-no-fixedincludes, $(ALL_MODULES)): Likewise.
5000 ($(NATIVE_CHECK_MODULES), $(CROSS_CHECK_MODULES)): Likewise.
5001 ($(INSTALL_MODULES), $(CONFIGURE_TARGET_MODULES)): Likewise.
5002 ($(ALL_TARGET_MODULES), $(CHECK_TARGET_MODULES)): Likewise.
5003 ($(INSTALL_TARGET_MODULES), $(ALL_X11_MODULES)): Likewise.
5004 ($(CHECK_X11_MODULES), $(INSTALL_X11_MODULES)): Likewise.
5005 (all-gcc, all-bootstrap, check-gcc, install-gcc): Likewise.
5006 (install-dosrel): Likewise.
5007 (all-opcodes): Depend upon all-libiberty.
5011 * config.guess (*:CYGWIN*): New
5015 * Makefile.in (all-target-winsup): All all-target-libiberty.
5019 * configure.in (noconfigdirs): Add missing # in front of comment.
5023 * configure.in: add second pass to things added to noconfigdirs
5024 so *-gm-magic can exclude libgloss properly.
5028 * mpw-configure (extralibs_name, rez_name): Set correctly
5029 for MWC68K compiler.
5031 * mpw-README: Add more info on the necessary build tools.
5035 * configure.in, config.sub: Recognize cygwin32.
5039 * config.guess, config.sub: Recognize A/UX.
5043 * config.sub: Merge with gcc/config.sub.
5047 * mpw-build.in (do-binutils): Add build of stamps.
5051 * config.sub: Add recognition for mips64vr4100*-* targets.
5055 * test-build.mk: Add checking of `hpux9' rather than just `hpux'.
5056 Add creation of gconfigargs with `--enable-shared' turned on.
5057 ($(host)-stamp-stage2-configured): Pass $(gconfigargs).
5058 ($(host)-stamp-stage3-configured): Likewise.
5059 (HOLES): Add chatr and ldd.
5060 (i386-ncr-sysv4.3*): Add use of /usr/ccs/bin in the PATH and HOLE_DIRS.
5064 * configure: Pass --nfp to recursive configures.
5068 * Makefile.in (DLLTOOL): New.
5069 (DLLTOOL_FOR_TARGET): New.
5070 (EXTRA_HOST_FLAGS): Pass down DLLTOOL.
5071 (EXTRA_TARGET_FLAGS): Ditto.
5072 (EXTRA_GCC_FLAGS): Ditto.
5073 (CONFIGURE_TARGET_MODULES): Ditto.
5075 * configure: Add DLLTOOL.
5080 * configure.in (i[345]86-*-sco3.2v5*): Use mh-sysv instead of
5081 mh-sco, since old workarounds no longer needed, and don't
5082 build ld, since libraries have weak symbols in COFF.
5086 * Makefile.in (CONFIGURE_TARGET_MODULES): Add missing ';'.
5090 * configure.in: Make sure that ${CC} can be used to compile an
5095 * Makefile.in (all-gdb): Depend on $(GDB_TK).
5096 * configure (GDB_TK): Set GDB_TK to either "all-tcl all-tk" or
5097 nothing depending on whether gdbtk is being built.
5101 * Makefile.in (newlib.tar.gz): Delete building of newlib's info files.
5105 * configure.in (noconfigdirs): Put ld or gas in this early, if the
5106 user specifically used --with-gnu-ld=no or --with-gnu-as=no.
5110 * config-ml.in: Add support for
5111 --disable-{softfloat,m68881,m68000,m68020} on m68*-*-*.
5112 Simplify setting of multidirs from --disable-foo.
5116 * Makefile.in (EXTRA_GCC_FLAGS): If any of the make variables
5117 LANGUAGES, BOOT_CFLAGS, STMP_FIXPROTO, LIMITS_H_TEST,
5118 LIBGCC1_TEST, LIBGCC2_CFLAGS, LIBGCC2_INCLUDES, and ENQUIRE are
5119 non-empty, pass them on to the GCC make.
5120 (all-bootstrap): New rule that is like all-gcc, except it executes
5121 the GCC bootstrap rule instead of the GCC all rule.
5125 * config-ml.in (ml_realsrcdir): New, to account for ${subdir}.
5129 * config.guess (AViiON:dgux:*:*): Update from FSF to add pentium
5134 * config.sub (i*86*) Change [345] to [3456]
5138 * configure.in (noconfigdirs): Add gas or ld if --with-gnu-as=no or
5143 * config-ml.in (rs6000*, powerpc*): Add switches to control which
5144 AIX multilibs get built.
5148 * configure.in (i386-win32): Don't build expect if we're not
5149 building the tcl subdir.
5153 * Makefile.in: (configure-target-examples, all-target-examples):
5154 New targets, configure and build example programs.
5158 * mpw-configure: If an mpw-config.in generated a file mk.sed,
5159 use it as input to sedit the generated MPW makefile.
5160 * mpw-README: Add a suggestion about Gestalt.h.
5164 * config.sub: Accept *-*-ieee*.
5168 * Makefile.in (local-distclean): Remove $(TARGET_SUBDIR). From
5173 * configure.in (host==powerpc-pe): Add many directories to noconfigdirs
5174 for powerpc-pe native.
5175 (target==i386-win32): add tcl, make to noconfigdirs if canadian cross.
5176 (target==powerpc-pe): duplicate i386-win32 entry.
5180 * configure.in (noconfigdirs): Exclude target-newlib for all versions
5181 of vxworks, not just vxworks5.1.
5185 * mpw-configure: Add support for exec-prefix.
5189 * config.guess: Recognize HP model 816 machines as having
5194 * configure: Ignore new autoconf configure options.
5198 * config/mt-v810 (CC_FOR_TARGET): Add -ansi flag. NEC compiler
5199 defaults to K&R mode, but doesn't have varargs.h, so we have to
5200 compile in ANSI mode.
5204 * config.guess: Recognize Pentium under SCO.
5209 * configure.in (noconfigdirs): Disable target-libio on v810-*-*.
5210 * config/mt-v810 (CC_FOR_TARGET, AS_FOR_TARGET, AR_FOR_TARGET,
5211 RANLIB_FOR_TARGET): Set as appropriate for NEC v810 toolchain.
5215 * configure.in: Don't configure gas for alpha-dec-osf*.
5219 * configure.in: Default to --with-stabs for some targets for which
5220 it makes sense: mips*-*-*, alpha*-*-osf*, i[345]86*-*-sysv4* and
5221 i[345]86*-*-unixware*.
5225 * config-ml.in: Get list of multidirs using gcc --print-multi-lib
5226 rather than basing it on the target. Simplify handling of options
5227 controlling which directories to configure. Remove extraneous
5228 slash in multi-clean target.
5232 * config-ml.in: Prefix more variables with ml_ so they don't collide
5237 * configure: Don't turn -v into --v.
5241 * configure.in (targargs): Fix typo.
5243 * Makefile.in (DEVO_SUPPORT): Add symlink-tree.
5247 * configure.in: Strip --host and --target options from
5248 CONFIG_ARGUMENTS, and always configure for --host only. Add
5249 --with-cross-host option when building with a cross-compiler.
5250 * configure: Canonicalize the arguments put into config.status by
5251 always using `=' for an option with an argument. Pass a presumed
5252 --host or --target explicitly.
5256 * config.sub: Merge -macos*, -magic*, -pe*, and -win32 cases
5257 into general OS recognition case.
5261 * configure.in (target_configdirs): add target-winsup only
5262 for win32 target systems.
5266 * Makefile.in (all-target-libgloss): Depend upon
5267 configure-target-newlib, since when libgloss is built it looks to
5268 see if the newlib directory exists.
5272 * Makefile.in (DEVO_SUPPORT): Use config-ml.in instead of
5277 * configure: Handle LD and LD_FOR_TARGET when configuring a
5282 * config/mh-i386win32: add LD_FOR_TARGET.
5286 * configure.in (target_libs): add target-winsup.
5287 (target==i386-win32): add patch diff flex make to $noconfigdirs.
5288 (target==ppcle-pe): remove ld from $noconfigdirs.
5292 * Makefile.in (CONFIGURE_TARGET_MODULES): Pass --with-target-subdir.
5293 Preserve relative path names in $srcdir. Build symlink tree if
5294 configuring cross target dir and srcdir=. (= no VPATH support).
5295 (configure-target-libg++): Depend on configure-target-librx.
5296 * cfg-ml-com.in, cfg-ml-pos.in: Deleted.
5297 * config-ml.in: New file.
5298 * symlink-tree: New file.
5299 * configure: Ensure srcdir="." if that's what it is.
5303 * mpw-README: Clarify some phrasing, add notes about CodeWarrior
5304 includes and FLEX_SKELETON setting.
5305 * mpw-configure (--with-gnu-ld): New option, controls whether
5306 to use PPCLink or ld with PowerMac GCC.
5307 * mpw-build.in (all-grez, do-grez, install-grez): New targets.
5308 * mpw-config.in: Configure grez if targeting Mac.
5310 * config.sub: Accept pmac and pmac-mpw as names for PowerMacs,
5311 accept mpw and mac-mpw as names for m68k Macs, change macos7 to
5313 * configure.in: Configure grez resource compiler if targeting Mac.
5314 * Makefile.in (all-grez, install-grez): New targets.
5318 * configure: CXX defaults to gcc, not g++. If we find
5319 gcc in the path, set CC to gcc -O2.
5323 * configure: Default ${build} correctly. Avoid picking up extra
5324 spaces when reading CC and CXX from Makefile. When doing a
5325 Canadian Cross, use plausible default values for numerous
5327 * configure.in: When doing a Canadian Cross, don't try to
5328 configure tools whose configure script can't handle it.
5332 * cfg-ml-com.in (sh-*-*): Add m2 and ml/m2 to multidirs.
5336 * configure: Remove dubious bug reporting address.
5340 * Makefile.in ($(CONFIGURE_TARGET_MODULES)): If subdir has
5341 configure script, run that instead of this directory's configure.
5342 In either case, print a message that we're configuring the sub-dir.
5346 * configure.in: Before checking for the existence of various files,
5347 use sed to filter out "target-".
5351 * Makefile.in (DO_X): Split rule to decrease command line length
5353 (Philippe De Muyter).
5357 * Makefile.in (all-patch): depend on all-libiberty.
5361 * configure.in: If the only directory in target_configdirs which
5362 actually exists is libiberty, then set target_configdirs to empty,
5363 to avoid trying to build a target libiberty in a gas or gdb
5368 * configure.in (host_makefile_frag): Use m68k-sun-sunos* instead
5369 of m68k-sun-* when selecting mh-sun3 to avoid matching NetBSD/sun3
5374 * configure.in (copy_dirs): Use sys-include instead of include
5375 for --with-headers option.
5379 * Makefile.in, configure.in: Make winsup builds work with
5384 * configure.in: Build the linker on AIX.
5388 * Makefile.in (CC_FOR_TARGET, CXX_FOR_TARGET): Add $(TARGET_SUBDIR)
5393 * Makefile.in (all-gcc): Fix typo.
5397 * Makefile.in ($(CHECK_TARGET_MODULES)): Fix typo.
5401 * configure.in: Rename libFOO to target-libFOO, and xiberty
5402 to target-xiberty, to provide more flexibility.
5403 (target_subdir): Define. Create if cross.
5404 Set TARGET_SUBDIR in Makefile to ${target_subdir}.
5405 * Makefile.in: Rename all-libFOO -> all-target-libFOO, all-xiberty
5406 -> all-target-libiberty, configure-libFOO -> configure-target-libFOO,
5407 check-libFOO -> check-target-libFOO, etc.
5408 ($(DO_X)): Iterate over TARGET_CONFIGDIRS after SUBDIRS.
5409 ($(CONFIGURE_TARGET_MODULES), $(CHECK_TARGET_MODULES),
5410 $(ALL_TARGET_MODULES), $(INSTALL_TARGET_MODULES)): Update accordingly.
5411 (configure-target-XXX): Depend on $(ALL_GCC), not all-gcc, to
5412 allow ALL_GCC="" to only configure.
5413 (DEVO_SUPPORT): Add cfg-ml-com.in and cfg-ml-pos.in.
5414 (ETC_SUPPORT, ETC_SUPPORT_PFX): Merge; update 'taz' accordingly.
5415 (LIBGXX_SUPPORT_DIRS): Remove xiberty.
5419 * Makefile.in (taz): Build "info" in etc explicitly.
5423 * configure.in: Make sure that CC is undefined (as opposed to
5424 null) if toplevel/config/mh-{host} doesn't define it. Fixes a
5425 problem with autoconf trying to configure on a host without GCC.
5429 * mpw-configure: Set host alias from choice of host compiler,
5430 only use generic MPW Makefile sed if present, edit a file
5431 named "hacked_Makefile.in" instead of "Makefile.in" if present.
5432 * mpw-README: Add problem notes about CW6 and CW7.
5436 * Makefile.in (taz): Use ";" instead of ";;".
5440 * Makefile.in (taz): Grep for '^diststuff:' or '^info:' in
5441 sub-directory Makefiles, instead of using DISTSTUFFDIRS and
5443 (DISTSTUFFDIRS, DISTDOCDIRS): Removed - no longer used.
5444 (newlib.tar.gz): Don't pass DISTDOCDIRS to recursive make.
5448 * Makefile.in (DISTDOCDIRS): Remove ld gprof bnutils gas libg++ gdb
5449 and gnats, because they are now subsumed by DISTSTUFFDIRS.
5450 Move bfd to DISTSTUFFDIRS.
5454 * Makefile.in (X11_LIB): Removed.
5455 (X11_FLAGS_TO_PASS): pass only X11_EXTRA_CFLAGS and X11_EXTRA_LIBS.
5457 * configure.in (host_makefile_frag): mh-aix & mh-sun removed.
5461 * cfg-ml-com.in (powerpc*): Shorten some of the multilib directory
5466 * cfg-ml-com.in (powerpc*-eabi*): Add mcall-aixdesc varients.
5470 * configure.in (i[345]86-*-win32): Always build newlib.
5471 Don't configure cvs, autoconf or texinfo.
5472 * Makefile.in (LD_FOR_TARGET): New.
5473 (BASE_FLAGS_TO_PASS, EXTRA_TARGET_FLAGS, CONFIGURE_TARGET_MODULES):
5474 Pass down LD_FOR_TARGET.
5478 * winsup: New directory.
5479 * Makefile.in: Build winsup.
5480 * configure.in: Winsup is configured when target is win32.
5481 Can only build win32 target GDB when native.
5485 * config.guess: Recognize HP model 819 machines as having
5490 * configure: Fix sed loop which substitutes for CC and CXX to
5491 avoid bug found in various sed implementations.
5495 * cfg-ml-com.in (powerpc-*-eabisim): Delete separate rule for
5496 simulator. Use standard powerpc-*-eabi*.
5500 * configure.in: Stop putting gas and binutils in noconfigdirs for
5501 powerpc-*-aix* and rs6000-*-*.
5505 * cfg-ml-com.in (powerpc*-*-eabisim*): Add support for building
5506 -mcall-aixdesc libraries.
5512 * config.sub (arm | armel | armeb): Fix shell syntax.
5516 * cfg-ml-com.in ({powerpc,rs6000}-ibm-aix*): Add multilibs for
5517 -msoft-float and -mcpu=common support.
5518 (powerpc*-*-eabisim*): Add support for building -mcall-aix
5523 * configure.in: Allow configuration and build of emacs19 for the alpha.
5527 * configure.in (CC): Get ^CC, not just any old CC, from
5528 ${host_makefile_frag}.
5532 * configure.in (CC): Try to get CC from
5533 ${srcdir}/${host_makefile_frag}, not ${host_makefile_frag}.
5537 * Makefile.in (TARGET_CONFIGDIRS): configure targetdirs
5538 only if it exists in $(srcdir).
5542 * configure: If CC and CXX are not set in the environment, set
5543 them, based on either an existing Makefile or on searching for gcc
5544 in PATH. Substitute for CC and CXX in Makefile.
5545 * configure.in: Remove libm from target_libs. Separate
5546 target_configdirs from configdirs. If CC is not set in
5547 environment, try to get it from a host Makefile fragment. Rewrite
5548 changes of configdirs to use skipdirs instead. A few minor
5549 tweaks. Take directories out of target_configdirs as they are
5550 taken out of configdirs. Remove existing Makefile files from
5551 subdirectories. Substitute for TARGET_CONFIGDIRS and
5552 CONFIG_ARGUMENTS in Makefile.
5553 * Makefile.in (TARGET_CONFIGDIRS): New variable, automatically set
5555 (CONFIG_ARGUMENTS): Likewise.
5556 (CONFIGURE_TARGET_MODULES): New variable.
5557 ($(DO_X)): Loop over TARGET_CONFIGDIRS as well as SUBDIRS.
5558 ($(CONFIGURE_TARGET_MODULES)): New target.
5559 (configure-libg++, configure-libio): New targets.
5560 (all-libg++): Depend upon configure-libg++.
5561 (all-libio): Depend upon configure-libio.
5562 (configure-libgloss, all-libgloss): New targets.
5563 (configure-libstdc++): New target.
5564 (all-libstdc++): Depend upon configure-libstdc++.
5565 (configure-librx, all-librx): New targets.
5566 (configure-newlib): New target.
5567 (all-newlib): Depend upon configure-newlib
5568 (configure-xiberty): New target.
5569 (all-xiberty): Depend upon configure-xiberty.
5573 * configure.in (host i[345]86-*-win32): Expand the
5578 * mpw-configure: Fix sed command file name.
5582 * configure.in (host i[345]86-*-win32): Reduce the
5587 * configure.in: Don't configure ld and gdb for powerpc*-*-winnt*
5588 or powerpc*-*-pe*, since they are not yet supported.
5592 Add PowerMac support and many other enhancements.
5593 * mpw-configure: New option --cc to select compiler to use,
5594 paste options set according to --cc into the generated
5595 Makefile, generate the Makefile by sed'ing the Unix Makefile.in
5596 if mpw-make.sed is present.
5597 * mpw-config.in: Don't test for gC1, test for mpw-touch,
5598 add forward includes for PowerPC include files.
5599 * mpw-build.in: Build using Makefile.PPC if present.
5600 (do-byacc, etc): Remove separate version resource builds.
5601 (do-gas): Build "stamps" before "all".
5602 (do-gcc): Build "stamps-h" and "stamps-c" before "all".
5603 * mpw-README: Update to reflect --cc option, PowerMac support,
5604 and recently-reported compatibility problems.
5608 * cfg-ml-com.in (m68*-*-*): Only build multilibs for
5609 embedded m68k systems (-aout, -coff, -elf, -vxworks).
5610 (--with-multilib-top): Pass to recursive invocations.
5614 * configure.in (noconfigdirs): Disable libg++ and libstdc++ on
5619 * configure.in (noconfigdirs): Disable bfd, binutils, gas, gcc,
5620 gdb, ld and opcodes on v810-*-*.
5624 * config/mh-ncrsvr43: Removed AR_FLAGS
5628 * Makefile.in (DO_X): Change do-realclean to do-maintainer-clean.
5629 (local-maintainer-clean): New target.
5630 (maintainer-clean): New target.
5631 (realclean): Just depend upon maintainer-clean.
5635 * configure.in (noconfigdirs): Disable gdb on m68k-*-netbsd*.
5639 * configure.in: Build ld in mips*-*-bsd* case.
5643 * config.sub: Accept -lites* OS. From Ian Dall.
5647 * config.sub: recognise mips64vr4300 and mips64vr4300el as valid
5652 * configure.in: treat i386-win32 canadian cross the same as
5653 i386-go32 canadian cross.
5657 * cfg-ml-com.in (powerpc*-*-eabisim): Add support for PowerPC
5658 running under the simulator to build a reduced set of libraries.
5659 (powerpc-*-eabiaix): Add fine grained multilib support added to
5660 other powerpc targets yesterday.
5664 * cfg-ml-com.in (powerpc*): Add support for -disable-biendian,
5665 -disable-softfloat, -disable-relocatable, -disable-aix, and
5666 -disable-sysv to control which multilib libraries get built.
5670 * configure: Add Makefile.tem to list of files to remove in trap
5675 * config.guess (*Linux*): Add missing "exit"s.
5676 Also, need specific check for alpha-unknown-linux (uses COFF).
5680 * config.guess: Merge with FSF:
5683 * config.guess (AIX4): More robust release numbering discovery.
5686 * config.guess (i386-sequent-ptx): Properly get version number.
5689 * config.guess (mips:*:4*:UMIPS): New case.
5693 * configure.in (i386-go32 host): Fix typo (deja-gnu -> dejagnu).
5694 (i386-win32 host): Likewise. Don't build readline.
5698 * Makefile.in (GDBTK_SUPPORT_DIRS): Define and pass as part of
5699 SUPPORT_FILES to submakes.
5703 * Makefile.in (GDB_SUPPORT_DIRS): Add utils.
5704 (DEVO_SUPPORT): Add mpw-README, mpw-build.in, mpw-config.h and
5709 * configure.in (appdirs): Use =, not ==, in test expression when
5710 trying to build the text to print in the warning message for
5715 * cfg-ml-com.in (z8k-*-coff): Add 'std' multilib build.
5719 * config.guess: Recognize lynx-2.3.
5723 * config.sub (z8ksim): Deleted
5724 (z8k-*-coff): New, this is the one true name of the target.
5728 * cfg-ml-pos.in (dotdot): Work around SunOS sed bug.
5732 * config.guess (*:Linux:*:*): First try asking the linker what the
5733 default object file format is (elf, aout, or coff). Then if this
5734 fails, try previous methods.
5738 * configure.in: Don't build newlib for *-*-vxworks5.1.
5742 * configure.in: Don't build newlib for a29k-*-vxworks5.1.
5743 * test-build.mk: Add setting of --with-headers for a29k-vxworks5.1.
5747 * cfg-ml-pos.in (MULTITOP): Trim excess trailing "/.".
5751 * cfg-ml-com.in: New file.
5752 * cfg-ml-pos.in: New file.
5756 * COPYING.NEWLIB: Add HP free copyright to list.
5760 * config.sub: Recognize -eabi* for the system, not just -eabi.
5764 * Makfile.in (DLLTOOL_FOR_TARGET): New name, pass it down.
5765 * config.sub, configure.in (win32): New target and host.
5769 * configure.in: Add i386-pe configuration.
5773 * mpw-build.in (install): Install GDB after LD.
5777 * mpw-config.in (elf/mips.h): Always forward-include, needed
5782 * testsuite: New directory for customer acceptance and whole tool
5787 * configure: If per-host line isn't found, but AC_OUTPUT is found
5788 and a configure script exists, run it instead.
5792 * config.guess: Update from FSF, for alpha-dec-winnt3.5 and Crays.
5796 * configure: Set build_{cpu,vendor,os,alias} to host values when
5797 --build isn't specified.
5801 * Makefile.in (PICFLAG, PICFLAG_FOR_TARGET): New macros.
5802 (FLAGS_TO_PASS): Pass them.
5803 (EXTRA_TARGET_FLAGS): Ditto.
5805 * config/m?-*pic: Define PICFLAG* instead of LIB*FLAGS*.
5809 * Makefile.in (all-libg++): Depend on all-libstdc++.
5813 * configure.in (noconfigdirs): Enable all packages for
5814 i386-unknown-netbsd.
5818 * configure.in (noconfigdirs): Don't configure tk for i386-go32
5819 hosted builds (DOS builds)
5823 Changes for ARM based on patches from Richard Earnshaw:
5824 * config.sub: Handle armeb and armel.
5825 * configure.in: Omit arm linker only for riscix.
5829 * config.guess: Update from FSF.
5833 * config.sub: Recognize powerpcle as the little endian varient of
5834 the PowerPC. Recgonize ppc as a PowerPC variant, and ppcle as a
5835 powerpcle variant. Convert pentium into i586, not i486. Add p5
5836 alias for i586. Map new x86 variants p6, k5, nexgen into i586
5841 * configure.in (hppa*-*-lites*): Treat like hppa*-*-*elf*.
5845 * config.sub: Accept -lites* as a basic system type.
5849 * config.guess (*:Linux:*:*): Check for whether the pre-BFD linker is
5850 installed, and if so return linuxoldld as the system name.
5854 * config.guess: Add hppa1.1-hp-lites support.
5858 * configure.in: Don't build newlib for m68k-vxworks5.1.
5862 * configure.in (mips-sgi-irix6): Use mh-irix5.
5866 * Makefile.in (all-gcc): Depend on all-ld (for libgcc1-test).
5870 * test-build.mk: Enable building of shared libraries on IRIX 5 and
5871 OSF/1. Fix compiler flags.
5872 * build-all.mk: Support Linux and OSF/1 3.0. Fix compiler flags.
5876 * configure.in: Recognize --with-newlib.
5877 (sparc-*-sunos4*): Build sim, dejagnu, expect, tcl if cross target.
5881 * Makefile.in: move {all,check,install}-gdb from *_MODULES
5882 to *_X11_MODULES due to gdbtk needing X include files et al.
5886 Merge in support for Mac MPW as a host.
5887 (Old change descriptions retained for informational value.)
5889 * mpw-config.in: Add generic include forwards for cpu-specific
5890 include files in aout and elf directories.
5892 * mpw-configure: Added copyright.
5893 * mpw-config.in: Check for presence of required build tools.
5894 (target_libs): Add newlib.
5895 (target_tools): Add examples.
5896 (Read Me): Generate as "Read Me for MPW" instead.
5897 * mpw-build.in: Base sub-builds on all-foo instead of do-foo.
5898 (all-byacc, do-byacc, all-flex, do-flex, do-newlib): New actions.
5899 (do-gas, do-gcc, do-gdb, do-ld): Build Version.r first.
5901 * mpw-configure: Remove subdir-specific makefile hackery,
5902 delete mk.tmp after using it.
5904 * mpw-build.in (all): Display start and end times.
5906 * mpw-configure (host_canonical): Set.
5907 (target_cpu): Always add to makefiles.
5908 (ARCHDEFS, EMUL): Add to makefile only if nonempty.
5909 (TM_FILE, XM_FILE, NM_FILE): No longer add to makefile.
5910 (mpw-mh-mpw): Look for in srcdir and srcroot.
5911 Use sed instead of mpw-edit-prefix to edit prefix definitions.
5913 * mpw-build.in: (install-only): New target.
5915 * mpw-configure (host_alias, target_alias): Rename from hostalias
5916 and targetalias, add into generated Makefile.
5917 (mk.tmp): If present, add into generated Makefile.
5918 * mpw-build.in (all-gas): Build config.h first before gas proper.
5920 * mpw-configure (config.status): Write only if changed.
5921 * mpw-config.in (readline): Configure it (not built, just used for
5924 * mpw-config.in (elf/mips.h): Add a forward include.
5926 * mpw-config.in: Forward-include most .h files in include into
5928 (readline): Don't build.
5929 mpw-build.in (install): Install GDB.
5931 * mpw-configure (prefix, mpw_prefix): Handle it.
5932 * mpw-config.in (mmalloc, readline): Don't configure.
5933 * mpw-build.in (thisscript): Rename to ThisScript.
5934 Use mpw-build instead of BuildProgram everywhere.
5935 (mmalloc, readline): Don't build.
5936 * mpw-README: New file, basic documentation about the MPW port.
5938 * mpw-config.in: Use forward-include to create include files.
5940 * mpw-configure: Add more things to the top of each configured
5941 Makefile, including contents of config/mpw-mh-mpw.
5942 * mpw-config.in (extra-include): Create this directory and fill it
5943 with Posix-like include files when configuring.
5945 * config.sub (apple, mac, mpw): Add various aliases.
5947 * mpw-build.in: New file, top-level build script fragment for MPW.
5948 * mpw-configure: New file, configure script for MPW.
5949 * mpw-config.in: New file, config fragment for MPW.
5953 * configure.in (host_libs): Remove glob, since it is gone from the
5958 * Makefile.in: define empty GDB_NLM_DEPS var.
5960 * configure.in(target_makefile_frag): use config/mt-netware
5961 for netware targets.
5965 * config.sub: Merge in recent FSF changes. Remove linux special
5970 build-all.mk,config/mh-solaris: revert these two changes:
5974 * build-all.mk: Use CC=cc -Xs on Solaris.
5976 Mon Mar 29 19:59:26 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5978 * config/mh-solaris: SunPRO C needs -Xs to be able to get a
5979 working xmakefile for Emacs.
5983 * glob/*: Removed. Schauer's 24 Feb 1994 readline change made us
5985 * Makefile.in: Nuke all references to glob subdirectory.
5989 * configure.in: Fix --enable-shared logic in per-host.
5993 * configure.in (*-hp-hpux[78]*): Use mh-hpux8.
5997 * configure.in (noconfigdirs): Don't build gas on AIX, for
5998 powerpc*-*-aix* as well as for rs6000*-*-aix*.
6002 * configure: Fix --cache-file to work if the file argument is a
6007 * configure: If the --cache-file is used, pass it down to
6008 configure in subdirectories.
6012 * config.sub: add vxworks29k configuration.
6016 * Makefile.in (taz): Do "diststuff" part quietly.
6020 * config.sub: Mini-merge with gcc/config.sub.
6024 * config.guess (IRIX): Sed - to _.
6028 * Makefile.in (source-vault, binary-vault): New targets.
6032 * config.sub: Recognize -eabi as a basic system type.
6036 * configure.in (enable_shared stuff): Fix typo.
6040 * Makefile.in (BASE_FLAGS_TO_PASS): Fix typo in passing LIBCXXFLAGS*.
6044 * Makefile.in (LIBCXXFLAGS_FOR_TARGET): Add -fno-implicit-templates.
6048 * configure.in (rs6000-*-*): Don't build gas.
6052 * Makefile.in: Use /x/x/ instead of /brokensed/brokensed/, to
6053 reduce command line length.
6054 (AS_FOR_TARGET): Check for as.new, not Makefile.
6055 (NM_FOR_TARGET): Check for nm.new, not Makefile.
6059 * config.guess: Merge from FSF.
6063 * configure: Don't use $ when handling program_suffix.
6067 * configure.in: Configure tk for hppa/hpux.
6071 * Makefile.in (LIBGXX_SUPPORT_DIRS): Add libstdc++.
6075 * Makefile.in: Move -fno-implicit-template from CXXFLAGS
6076 to LIBCXXFLAGS. Tests are better run without it.
6080 * Makefile.in (all-ispell): Depend on all-emacs19 instead of all-emacs.
6084 * configure.in (*-*-netware*): Don't configure xiberty.
6088 * configure.in: Remove tk from native_only list.
6092 * build-all.mk: Add mips-ncd-elf target to sun4 targets
6093 for special NCD build.
6097 * Makefile.in (DEVO_SUPPORT): Remove configure.bat and
6098 makeall.bat, they're only useful for binutils snapshots.
6099 (binutils.tar.gz, gas+binutils.tar.gz): Add configure.bat and
6100 makeall.bat to specified SUPPORT_FILES.
6104 * build-all.mk: Add Ericsson targets to sun4 and solaris
6105 hosts. Add BNR's sun4 target to solaris host, so their
6106 build-from-source will be tested in-house first.
6110 * Makefile.in (LIBCFLAGS): New variable.
6111 (CFLAGS_FOR_TARGET): Ditto.
6112 (LIBCFLAGS_FOR_TARGET): Ditto.
6113 (LIBCXXFLAGS): Ditto.
6114 (CXXFLAGS_FOR_TARGET): Ditto.
6115 (LIBCXXFLAGS_FOR_TARGET): Ditto.
6116 (BASE_FLAGS_TO_PASS): Pass them.
6117 (EXTRA_TARGET_FLAGS): Ditto.
6119 * configure.in, config/m[th]-*pic: Support --enable-shared.
6123 * configure.in (target_libs): Include libstdc++ again.
6124 * config.guess: Update from FSF (for FreeBSD).
6128 * Makefile.in (DEVO_SUPPORT): Include configure.bat and
6130 (DISTDOCDIRS): Add `etc'.
6131 (ETC_SUPPORT_PFX): New variable.
6132 (taz): Include anything from etc starting with a word in
6137 * config.sub: Update for recent FSF changes. Remove obsolete
6138 h8300hds entry. Add -windows* and -osx as basic os. Minor
6143 * configure.in (target_libs): Remove libstdc++ for libg++-2.6.1.
6145 * config.guess: Merge with FSF.
6146 * configure.in: Match on i?86-ncr-sysv4.3, not i?86-ncr-sysv43.
6150 * configure: Since the "trap 0" handler will override the exit
6151 status on many systems, only use it for "exit 1", and make it set
6152 a non-zero exit status; reset it before "exit 0". Also, check
6153 exit status of config.sub, and error out if it failed.
6157 * Makefile.in: (ALL_TARGET_MODULES,INSTALL_TARGET_MODULES) Build
6158 and install libgloss.
6162 * Makefile.in (all-binutils): Depend upon all-byacc.
6164 * configure.in: Don't build emacs on Irix 5.
6168 * configure.in (*-*-netware*): Add libio.
6172 * Makefile.in (ALL_TARGET_MODULES): Add libstdc++.
6173 (CHECK_TARGET_MODULES): Ditto.
6174 (INSTALL_TARGET_MODULES): Ditto.
6175 (TARGET_LIBS): Ditto.
6176 (all-libstdc++): Note dependencies.
6180 * Makefile.in (BINUTILS_SUPPORT_DIRS): Add gas.
6184 * Makefile.in (CXXFLAGS): Use -fno-implicit-templates instead of
6185 -fexternal-templates.
6187 * configure.in (target_libs): Add libstdc++.
6188 (noconfigdirs): Add libstdc++ as appropriate.
6192 * config.guess: Update from FSF.
6196 * configure: Use ${config_shell} when running ${configsub}.
6200 * config.sub: No longer recognize h8300h.
6204 * config.sub: Remove extraneous differences between config.sub and
6209 * Makefile.in (DISTSTUFFDIRS): Add gas.
6213 * COPYING.NEWLIB: New file.
6217 * config.guess (HP-UX): Patch from Harlan Stenn
6222 * config.guess (sun4*:SunOS:*:*): Change '-JL' to '_JL'.
6226 * config.sub: Merge nextstep cleanup from FSF.
6230 * configure.in (arm-*-*): Don't configure ld for this target.
6234 * configure.in (*-*-netware): don't configure libg++, libio,
6239 * configure.in (alpha-dec-osf*): Use osf*, not osf1*. Don't
6240 configure ld--it works, but it doesn't support shared libraries.
6244 * config.guess (*-unknown-freebsd*): Get rid of possible
6245 trailing "(Release)" in version string.
6250 * config.guess: Fix i486-ncr-sysv43 -> i486-ncr-sysv4.3.
6251 Fix type: *-next-neststep -> *-next-nextstep.
6253 * config.guess: Merge from FSF:
6257 * config.guess: Recognize powerpc-ibm-aix3.2.5.
6261 * config.guess: Recognize UnixWare 1.1 (UNAME_SYSTEM is SYSTEM_V
6262 instead of UNIX_SV for UnixWare 1.0).
6266 * Makefile.in (all-gdb): Add dependencies on all-gcc and all-ld
6267 to make gdb/nlm/* build after the compiler and linker.
6271 * config.guess (netbsd, freebsd, linux): Accept any machine,
6273 (m68k-atari-sysv4): Relocate to match FSF version.
6275 * config.guess: More merges from the FSF:
6277 Add a space before function call or macro invocation.
6281 * config.guess: Add trap cmd to remove dummy.c and dummy when
6286 * config.guess (dummy.c): Redirect stderr for `hostinfo' command.
6287 (dummy): Redirect stderr from compilation of dummy.c.
6291 * config.guess: Distinguish between NeXTStep 2.1 and 3.x.
6295 * configure: Accept and ignore --cache*, for compatibility with
6300 * config.guess: Merge from FSF:
6304 * config.guess (Pyramid*:OSx*:*:*): New case.
6305 (PATH): Add /.attbin at end for finding uname.
6306 (dummy.c): Handle i860-alliant-bsd. Follow whitespace conventions.
6310 * config.guess (M88*:DolphinOS:*:*): New case.
6314 * config.guess (AViiON:dgux:*:*): Use TARGET_BINARY_INTERFACE
6315 to select whether to use ELF or COFF.
6319 * config.guess: Recognize i860-stardent-sysv and i860-unknown-sysv.
6323 * config.guess: Guess the OS version for HPUX.
6327 * config.guess (UNAME_VERSION): Recognize aix3.2.4 and aix3.2.5.
6331 * configure.in: Recognize --with-headers, --with-libs, and
6333 * Makefile.in (all-xiberty): Depend upon all-ld.
6337 * configure.in: Change i[34]86 to i[345]86.
6341 * configure (version): A few more tweaks to help message.
6345 * Makefile.in: Remove (for now) librx as a host library,
6346 now that we're building it for target.
6355 * configure.in: Also configure librx.
6359 * Makefile.in: Update various rules to reflect that librx
6360 is now needed for libg++.
6364 * config.sub: Accept mips64orion and mips64orionel as a CPU name.
6368 * configure.in: Configure the examples directory.
6372 * configure: Simplify Jun 2 1994 change.
6376 * change CC to /usr/latest/bin/gcc for lynx host builds, since
6377 /bin/gcc isn't good enough to build gcc.
6381 * Makefile.in (GDB_SUPPORT_FILES): Remove
6382 (setup-dirs-gdb, gdb.tar.gz, make-gdb.tar.gz): Remove old rules.
6383 (gdb.tar.gz): Add new rule to use standard distribution building
6388 * configure.in: Warn about use of /usr/ucb/cc on Solaris. From
6397 * configure: Search current dir first in .gdbinit.
6401 * config.sub: Recognize freebsd (merged from gcc config.sub).
6405 * config.sub: Refer to NeXT's operating system as nextstep.
6407 * config.sub (case $basic_machine): Re-order the cases, to match
6408 the order in the FSF version (which is mostly alphabethical).
6409 Merge in some additions and changes from the FSF.
6413 * config.guess: Recognize m68k-atari-sysv4 and m88k-harris-csux7.
6414 * config.sub: Recognize cxux7.
6415 * configure.in: Use mh-cxux for m88k-harris-cxux*.
6419 * config.sub: Fix typo powerpc -> powerpc-*.
6423 * Makefile.in: `all-emacs19' depends on `all-byacc'.
6425 * Makefile.in: Add all-emacs19 and install-emacs19 rules (in
6426 parallel with all-emacs and install-emacs). Top-level command
6427 `make all-emacs19 CC=gcc' now behaves as `make all-emacs CC=gcc'.
6431 * test-build.mk ($(host)-stamp-stage2-installed): Remove
6432 $(relbindir)/make before doing ``make install'', and use
6433 $(GNU_MAKE) while doing it. Avoids problem on SunOS with
6434 installing over running make binary.
6435 ($(host)-stamp-stage3-installed): Likewise.
6439 * config.guess: Recognize Mach.
6443 * configure: Check ${exec_prefixoption}, not ${exec_prefix}, to
6444 see whether --exec-prefix was used.
6448 * README: Explicitly mention libg++/README. (Zoo's idea.)
6452 * Makefile.in: Add all-librx target similar to all-libproc.
6456 * config.guess: Rearrange tests for Alpha-OSF1 to properly deal
6457 with post 1.2 uname bogosity.
6461 * configure: Remove temporary files on receipt of a signal.
6465 * configure: If there is a package_makefile_frag, remove
6466 ${subdir}/Makefile.tem after copying it in.
6470 * build_all.mk: support rs6000 lynx identifies itself as
6471 rs6000-lynx-lynxos2.2.2. Also, use /usr/cygnus/progressive/bin/gcc
6472 since /bin/gcc is too feeble to compile a modern gcc.
6476 * brought devo/test-build.mk update-to-date with progressive/
6477 test-build.mk. Add lynx targets and hppa flag info.
6481 * configure.in: Use mh-ncrsvr43. Patch from
6486 * config.guess (i386-unknown-bsdi): No longer need to
6487 check #if defined(__bsdi__) && defined(__i386__).
6491 * configure: Set program_transform_nameoption correctly.
6495 * brought build-all.mk update-to-date with progressive build-all.mk,
6496 added new targets and hppa info.
6500 * configure: If config.guess result is a prefix of the user
6501 specified target, assume a native build and use the user specified
6502 target as the host alias. Remove SunOS patch suffix removal hack.
6503 * configure.in: Remove SunOS patch suffix removal hack.
6505 * Makefile.in (CROSS_CHECK_MODULES): Remove check-flex, since it's
6506 in NATIVE_CHECK_MODULES.
6510 * Makefile.in: Rename HOST_ONLY to NATIVE.
6511 * configure: Delete SunOs patch suffix from host_canonical
6512 and build_canonical variables that are prepended to Makefiles.
6513 * configure.in: Add comments for easier maintenance.
6517 * Makefile.in: Add all-libproc target similar to all-gui.
6521 * Makefile.in (CHECK_MODULES): split into
6522 HOST_ONLY_CHECK_MODULES and CROSS_CHECK_MODULES.
6526 * config.guess (i386-unknown-bsdi): New system to guess.
6530 * Makefile.in: Add all-gui target (but not yet build by "all").
6534 * config.sub: Move deletion of patch suffix from here...
6535 * configure.in: To here, at Ian's suggestion. The top-
6536 level scripts might need to know of a patch level.
6540 * config.sub: Strip off patch suffix so rtl is recognized
6541 as a sunos4.1.3 machine, even though it's been patched.
6545 * Makefile.in (INSTALL_LAST): Delete.
6546 (INSTALL_DOSREL): New.
6550 * configure.in: Use ld for i[34]86-*-sysv4* and sparc-*-solaris2*.
6551 Don't set use_gnu_ld to no for *-*-sysv4; that only controls
6552 whether we pass down --with-gnu-ld anyhow.
6556 * Makefile.in (INSTALL_LAST): Change operation so it works
6557 on more flavors of make.
6558 * configure.in (go32): Don't build libg++ or libio.
6562 * Makefile.in (Move HOST_PREFIX_1 and friends up so
6563 they can be overriden by templates.
6567 * configure.in (target==go32): Don't build gdb.
6568 * dosrel: New directory.
6572 * configure.in (host==go32): Configure dosrel too.
6573 * Makefile.in (INTALL_TARGET): Call INSTALL_LAST last.
6574 (HOST_CC, HOST_PREFIX, HOST_PREFIX_1): Undefine, they should
6575 be set by incoming names or templates.
6576 (INSTALL_LAST): New rule.
6577 * config/mh-go32: New fragment.
6581 * config.sub (sparclitefrw, sparclitefrwcompat): Don't set the os.
6585 * config/mh-lynxrs6k: Renamed from mh-lynxosrs6k, to make it
6586 unique in 8.3 naming schemes.
6587 * configure.in (appdirs): New variable. Currently empty, but will
6588 be used in gas distribution. If nonempty, lists a set of
6589 directories at least one of which must get configured, or top
6590 level configuration is considered to have failed.
6591 (rs6000-*-lynxos*): Use new file name.
6595 Eliminate XTRAFLAGS.
6596 * Makefile.in (CC_FOR_TARGET): If newlib exists, refer to the
6597 newlib include files using -idirafter, and also use -nostdinc.
6598 (CXX_FOR_TARGET): Likewise.
6599 (XTRAFLAGS): Removed.
6600 (BASE_FLAGS_TO_PASS): Remove XTRAFLAGS_FOR_TARGET.
6601 (EXTRA_HOST_FLAGS): Remove XTRAFLAGS.
6602 (EXTRA_TARGET_FLAGS, EXTRA_GCC_FLAGS): Likewise.
6603 ($(DO_X)): Don't pass down XTRAFLAGS.
6607 * configure.in (mips*-dec-bsd*): New target; do build linker.
6608 (mips*-*-bsd*): New target; don't build linker.
6612 * configure.in: support rs6000-*-lynxos* configuration.
6613 support sunos4 as a cross target.
6615 * config.sub: look for lynx*, not lynx since the OS version may
6616 legitimately be part of the name.
6620 * configure.in (i[34]86-*-sco*): Move to be with other i386
6622 (romp-*-*): New target. Skip various binary utilities.
6623 (vax-*-*): New target. Don't build newlib.
6624 (vax-*-vms): Renamed from *-*-vms. Don't build opcodes or newlib.
6628 * configure.in: Only set host_makefile_frag if config
6633 * install.sh: If $dstdir exists, don't check whether each
6638 * test-build.mk (HOLES): Add sleep; used by rcs/src/conf.sh.
6642 * configure.in (*-*-lynxos*): Don't configure newlib for either
6643 native or cross Lynx.
6647 * config.sub (sparc64-elf): Fix os.
6648 (z8k): Remove duplicate.
6652 * Makefile.in (gcc-no-fixedincludes): Touch gcc/include/fixed, not
6653 gcc/stmp-fixproto, to try to prevent fixproto from being run.
6657 * configure: Make file links cleanly even if Lynx fails on
6658 an NFS symlink (at least fail cleanly).
6662 * test-build.mk (CC): For mips-sgi-irix4, change -XNh1500 to
6667 * configure: Unknown options are fatal again.
6671 * configure: Ignore --x-includes and --x-libraries, for Autoconf
6676 * build-all.mk: Add `clean' target.
6680 * config.guess: Add SINIX support.
6681 * configure.in: Add mips-*-sysv4* support.
6685 * build-all.mk: Document all useful targets.
6686 If canonhost is sparc-sun-solaris2.3, change it to sparc-sun-solaris2.
6687 If canonhost is mips-sgi-irix4.0.5H, change it to mips-sgi-irix4.
6691 * configure: Support --silent, --quiet.
6695 * configure: Support --disable-FEATURE.
6699 * config.guess: Recognize NCR running SVR4.3.
6703 * config.guess: Make BSDI generate i386-unknown-bsd386.
6708 * configure.in (powerpc-*-aix*): Treat like rs6000-*-*.
6712 * configure: Make unrecognized options give nonfatal warnings
6713 instead of fatal errors, and pass them to any subdirectory
6714 configures in case they recognize them.
6715 Make --x equivalent to --with-x.
6719 * configure: Add --enable-* options. Clean up usage message and
6724 * Makefile.in (NM_FOR_TARGET): Build tree version is now nm.new.
6728 * configure.in (hppa*-*-*): Enable binutils.
6732 * config.sub: Recognize cisco.
6736 * Makefile.in (CXXFLAGS): Add -fexternal-templates.
6740 * config.guess: about target *-hitachi-hiuxwe2, don't print more
6741 than one configuration name. Add comment.
6745 * config.guess: about target *-hitachi-hiuxwe2, fixed
6746 machine guessing order. [Hitachi's CPU_IS_HP_MC68K
6747 macro is incorrect.]
6751 * Makefile.in (TAGS): Just build TAGS in each subdirectory, rather
6752 than the "make ls" stuff which used to be here.
6756 * config.guess: Recognize i[34]86-unknown-freebsd.
6761 * configure.in (noconfigdirs for alpha): Remove libg++ and libio.
6765 * config.guess: Check for ptx.
6769 * config.sub: Add os9k checking.
6773 * config.guess: Handle OSF1 running on HPPA processors
6777 * configure: If subdir configure fails, print out a message with
6778 subdirectory name, in case subdir's configure code didn't identify
6783 * configure.in: Remove embedded newlines from configdirs.
6784 Avoid mismatches of substrings. Fix matching strings at end
6787 Fri Feb 11 15:33:33 1994 Stu Grossman (grossman at cygnus.com)
6789 * config.guess: Add Lynx/rs6000 config support.
6793 * configure.in (alpha-dec-osf1*, alpha*-*-*): Build gas.
6797 * configure.in (hppa*-*-osf*): Treat this just like most other
6798 PA configurations (eg no binutils or ld).
6799 (hppa*-*-*elf*): These configurations have binutils and ld.
6807 * configure.in (rs6000-*-*): Build gas.
6811 * Makefile.in: Avoid bug in losing hpux sed.
6815 * Makefile.in, test-build.mk: Remove MUNCH_NM; it was only needed
6816 for GDB and GDB has been fixed to not need it.
6818 Mon Jan 31 18:40:55 1994 Stu Grossman (grossman at cygnus.com)
6820 * config/mh-lynxosrs6k: Account for lack of ranlib!
6824 * config.guess: Recognize vax hosts.
6828 * configure (while loop): Don't use "break 2" inside case
6829 statement -- the case statement isn't an enclosing loop.
6833 * config.guess: Clean up NeXT support, to allow nextstep
6834 on Intel machines. Make OS be nextstep.
6838 * config.guess: Add alternate forms for Convex.
6840 Thu Jan 20 16:13:41 1994 Stu Grossman (grossman at cygnus.com)
6842 * configure: Completely rewrite option processing. Take
6843 advantage of pattern-matching to avoid invoking test frequently.
6844 Also clean up host and target defaulting logic.
6848 * Makefile.in: Replace all occurrances of "rootme" with "r" and
6849 "$${rootme}" with "$$r", to increase the likelihood that the do-*
6850 commands (plus user environment) will fit SCO limits.
6854 * configure.in: Don't issue warnings about directories which are
6855 not being configured if -norecursion is set. Correct test for
6856 --with-gnu-as and --with-gnu-ld to not get confused by substring
6859 * configure.in: Don't build gas for alpha-dec-osf1*.
6861 Tue Jan 4 17:10:19 1994 Stu Grossman (grossman at cygnus.com)
6863 * configure: Back out Per's change of 12/19/1993. It changes the
6864 behavior of configure in unexpected and confusing ways.
6866 Also, use different delim char when calculating
6867 program_transform_name so that the name can contain slashes.
6871 * configure.in, config.sub: Add support for VSTa micro-kernel.
6875 * configure.in: Nuke hacks which were used to get a special
6876 version of GAS for HPPA configurations.
6880 * configure: If only ${target_alias} is given, use that
6881 as the default for ${host_alias}.
6882 * configure: Add missing back-slashes before nested quotes.
6886 * Makefile.in (BASE_FLAGS_TO_PASS): add YACC=$(BISON)
6890 * config.guess: Recognize some Tektronix configurations.
6895 * config.sub: Match any flavor of SH.
6899 * configure.in: Don't try to configure newlib for Alpha.
6903 * configure.in: Don't build ld for Irix 5. Don't build gas,
6904 libg++ or libio for any Alpha target.
6906 * configure.in (mips*-sgi-irix5*): New target; use mh-irix5.
6907 * config/mh-irix5. New file for Irix 5.
6911 * Makefile.in (GZIPPROG): Renamed from GZIP, which gzip uses for
6912 default arguments -- so it tried to compress itself.
6916 * configure.in (notsupp): ensure that a space is always at the end
6917 of the configdirs list, since the grep checks for an explicit space
6921 * configure.in (target i386-sysv4.2): don't build ld, since static
6922 versions of many libraries are not available.
6926 * config.guess: Recognize Apollos (using environment variables).
6927 * configure.in: Don't configure ld, binutils, or gprof for Apollo.
6931 * config.guess: Recognize Sony news mips running newsos.
6935 * Makefile.in (all-cygnus, build-cygnus): "fi else" needs to be
6936 "fi ; else" for bash.
6940 * Makefile.in (BASE_FLAGS_TO_PASS): pass SHELL.
6944 * config.sub: accept unixware as an alias for svr4.2.
6945 Fix some inconsistancies with the gcc version.
6949 * Makefile.in (DISTDOCDIRS): Add gdb.
6953 * Makefile.in (DISTDOCDIRS): Add libg++ and libio.
6957 * Makefile.in (taz): Only build "info" in DISTDOCDIRS.
6958 (DISTDOCDIRS): Don't assume libg++ and gdb folks necessarily want
6963 * config.sub: Accept hiux* as an OS name.
6965 * Makefile.in: Change RUNTEST_FLAGS back to RUNTESTFLAGS per
6966 etc/make-stds.texi. The underscore came from gcc, and dje now
6967 agrees that RUNTESTFLAGS is the correct name.
6971 * install.sh: Remove 'set -e'. It makes any conditionals
6972 in the script useless.
6974 * config.guess: Automatically recognize arm-acorn-riscix
6979 * Makefile.in: Change RUNTESTFLAGS to RUNTEST_FLAGS
6983 * Makefile.in (DISTDOCDIRS): New variable.
6984 (taz): Edit local Makefile.in sooner, instead of proto-toplev
6985 Makefile.in later. Build "info" and "dvi" in DISTDOCDIRS.
6989 * configure.in (hppa target): check the source directory for the
6994 * config.sub: Allow -aout* and -elf*.
6998 * configure.in: Don't build ld on i386-solaris2, same as for
7003 * Makefile.in (taz): Add texinfo/lgpl.texinfo (for libg++).
7007 * configure.in: Configure gdb for alpha.
7011 * Makefile.in (CXXFLAGS): Add -O.
7015 * config.guess: added support for DG Aviion
7019 * configure.in: Produce warning message for subdirectories not
7020 configurable for this host/target combination. Don't try to
7021 configure gdb for vms.
7025 * Makefile.in (taz): Replace "byacc" with "bison -y" in the
7026 appropriate files before making "diststuff".
7027 (DISTBISONFILES): New var: list of files to be edited.
7028 (DISTSTUFFDIRS): Add binutils.
7032 * config.sub: also handle mipsel and mips64el (for little endian mips)
7036 * configure.in: Add * to end of all OS names.
7040 * configure.in: Build newlib for LynxOS native.
7044 * config.guess: Add support for delta 88k running SVR3.
7046 * configure.in: Add comment about HP compiler vs. emacs.
7050 * configure.in: don't build ld on solaris2 (not a viable option
7051 due to bugs in getpwnam & getpwuid)
7055 * configure.in: Accept alpha-dec-osf1*, not just -osf1, since
7056 config.guess will produce a full version number.
7060 * configure.in: Build linker and binutils for alpha-dec-osf1.
7064 * Makefile.in: Remove -O from CXXFLAGS for consistency with CFLAGS,
7065 and gdb/testsuite/Makefile.in.
7069 * configure.in: recognize mips*- instead of mips-
7073 * config.sub: Accept linux*coff and linux*elf as operating
7078 * ltmain.sh: Handle symlinks in generated script.
7082 * config.sub: Recognize mips64, and mips3 as an alias for it.
7086 * configure.in: Remove alpha-dec-osf*, no longer necessary now that
7087 gdb knows how to handle OSF/1 shared libraries.
7091 * configure.in: Recognize hppa*-*-hiux* (currently synonym for hpux).
7092 * config.guess: Recognize Hitachi's HIUX.
7093 * config.sub: Recognize h3050r* and hppahitachi.
7094 Remove redundant cases for hp9k[23]*.
7098 * configure.in: default to '--with-gnu-as' and '--with-gnu-ld'
7099 if gas and ld are in the source tree and are in ${configdirs}.
7100 If ${use_gnu_as} or ${use_gnu_ld} are 'no', then don't set the
7101 --with options (but still pass them down on the command line,
7102 if they were explicitly specified).
7106 * configure: Handle autoconf style directory options: --bindir,
7107 --datadir, --includedir, --infodir, --libdir, --libexecdir,
7108 --mandir, --oldincludedir, --sbindir, --sharedstatedir,
7110 * Makefile.in (sbindir, libexecdir, sysconfdir): New variables.
7111 (sharedstatedir, localstatedir, oldincludedir): New variables.
7112 (BASE_FLAGS_TO_PASS): Pass down bindir, datadir, includedir,
7113 infodir, libdir, libexecdir, localstatedir, mandir, oldincludedir,
7114 sbindir, sharedstatedir, and sysconfdir.
7118 * configure: substitute SHELL value in Makefile.in with
7123 * ltmain.sh: Tweak shell pattern to avoid bug in NetBSD /bin/sh.
7127 * configure.in: Build gas, ld, and binutils for *-*-sysv4* and
7128 *-*-solaris2* targets.
7132 * Makefile.in: define M4, and pass it down to sub-makes;
7133 all-autoconf now depends on all-m4
7137 * Makefile.in ({AR,RANLIB}_FOR_TARGET): make contingent on
7138 presence of {ar,ranlib} instead of a configured directory
7142 * config.guess: Accept 34?? as well as 33?? for NCR.
7146 * configure.in: grab mt-hppa for HPPA targets; use 'gas ' instead
7147 of 'gas' in sed commands, since 'gash' is now in the tree as well.
7151 * configure: grab values for $(CC) and $(CXX) from the
7152 environment, so that someone can do "CC=gcc configure; make" and
7153 have it work right (matching the way that autoconf works now)
7155 * configure.in, Makefile.in: add support for gash, the tcl
7158 * config.guess: add NetBSD variants (hp300, x86)
7162 * install.sh: Support -d option (in the manner of SunOS 4 install,
7163 as it is more deterministic than that of GNU install)
7164 (chmodcmd): Set file to mode 755 by default (should also do default
7165 chgrp and chown, but I don't feel like dealing with that now)
7169 * config.sub: Remove h8300hhms alias.
7173 * configure.in: Match *-*-solaris2* not *-sun-solaris2*.
7177 * Makefile.in (gcc-no-fixedincludes): touch stmp-fixproto as well
7182 * config.sub: recognize m88110-bug-coff.
7186 * Makefile.in (all-libio): all dependencies on the toolchain used
7187 to build this (gcc, gas, ld, etc)
7191 * config.guess: Deal with OSF/1 1.3 on alpha.
7195 * install.sh: add some 'else true' clauses for portability
7197 * configure.in: don't build libio for h8[35]00-*-* targets
7201 * Makefile.in: Add support for new libio.
7205 * install.sh: If one command fails, don't try the rest. Don't try
7206 to remove $dsttmp (via trap) unless we have already created it.
7207 If $src doesn't exist, detect it and exit with an error.
7209 * config.guess: Recognize BSD on hp300.
7213 * config.guess: Map (9000/[34]??:HP-UX:*:*) to m68k-hp-hpux.
7218 * Makefile.in (all-send-pr): depends on all-prms
7222 * config.guess: Fix typo (9000/8??:4.3bsd -> 9000/7??:4.3bsd).
7227 Added test for mips-mips-riscos5.
7231 * configure.in: use mh-hp300 for 68k HP hosts
7235 * configure: add support for CONFIG_SHELL, so that you can use
7236 some alternate shell for evaluating configure scripts
7240 * Makefile.in (make-gdb.tar.gz): Sed bug reporting address
7242 distribution archive.
7243 * Makefile.in (COMPRESS): Remove def.
7244 * Makefile.in (gdb.tar.gz, make-gdb.tar.gz): Renamed from
7245 gdb.tar.Z and make-gdb.tar.Z respectively.
7246 * Makefile.in (make-gdb.tar.gz): Now only build gzip'd archive.
7247 * Makefile.in (make-gdb.tar.gz): Minor changes to move closer
7248 to convergence with 'taz' target in Makefile.in.
7252 * install.sh (dsttmp): use trap to ensure that tmp files go
7253 away on error conditions
7257 * Makefile.in (BASE_FLAGS_TO_PASS): remove LOADLIBES
7261 * Makefile.in (install-dirs): Deal with a prefix like /gnu;
7262 its parent is '/' not ''.
7264 * Makefile.in (DEVO_SUPPORT): Add comments about ChangeLog.
7268 * configure: if ${newsrcdir}/configure doesn't exist, don't assume
7269 that ${newsrcdir}/configure.in does.
7273 * test-build.mk: support for CONFIG_SHELL
7277 * config.sub (netware): Add as a basic system type.
7281 * Makefile.in (Makefile): depend on configure.in. Also drop the
7282 $(srcdir)/ from the dependency on Makefile.in.
7286 * config.sub: Recognize h8300hhms as h8300h-hitachi-hms.
7287 (h8300hhms is temporary until multi-libraries are implemented).
7288 * configure.in: Handle h8300h too.
7292 * config.guess: Recognize dpx/2 as m68k-bull-sysv3.
7296 * configure: Remove extraneous output when guessing host type.
7297 * config.guess: Remove extraneous output when guessing using C
7298 compiler rather than uname, or when guessing fails.
7300 Wed Jul 7 17:58:14 1993 david d `zoo' zuhn (zoo at rtl.cygnus.com)
7302 * Makefile.in: remove all.cross and install.cross targets
7304 * configure: remove CROSS=-DCROSS_COMPILE and ALL=all.cross
7309 * configure.in (target sh): Build gprof.
7311 Thu Jul 1 16:52:56 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
7313 * config.sub: change -solaris to -solaris2
7317 * configure.in: Use config/mh-riscos for mips-*-sysv*.
7321 * configure: Correct error message for missing Makefile.in to
7322 print correct directory.
7324 Tue Jun 29 13:52:16 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
7326 * install.sh: kludge around 386BSD shell bug
7330 * config.guess: Recognize NeXT.
7331 * config.guess: Recognize i486-ncr-sysv4.
7332 * Makefile.in (taz): rm $(TOOL)-$$VER before linking.
7336 * Makefile.in (MAKEINFOFLAGS): New variable.
7337 (FLAGS_TO_PASS): Pass MAKEINFO as MAKEINFO MAKEINFOFLAGS.
7338 * build-all.mk, test-build.mk: Pass down --no-split as
7339 MAKEINFOFLAGS when hosted on DOS. Compile DOS hosted without -g.
7343 * Makefile.in (DEVO_SUPPORT): Add COPYING COPYING.LIB install.sh.
7347 * Makefile.in (libg++.tar.z): New rule.
7348 * Makefile.in (taz): Replace 'configure -rm' by 'make distclean'.
7349 * Makefile.in (taz): Only do a single chmod.
7351 Fri Jun 18 12:03:10 1993 david d `zoo' zuhn (zoo at majipoor.cygnus.com)
7353 * install.sh: don't use dirname anymore (replaced with sed usage)
7357 * Makefile.in: Change extension for gzip'd files from '.z' to
7358 '.gz' per new FSF standard usage.
7360 Thu Jun 17 16:58:50 1993 david d `zoo' zuhn (zoo at majipoor.cygnus.com)
7362 * configure: put quotes around the final value of program_transform_name
7364 Tue Jun 15 16:48:51 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
7366 * Makefile.in: new install.sh support; update install-info rules
7370 * configure.in: Build diff for crosses, but not for go32 host.
7372 * configure.in: Build gprof only for native, and don't build it
7373 for mips-*-*, rs6000-*-*, or i[34]86-*-sco*.
7375 Mon Jun 7 13:12:11 1993 david d `zoo' zuhn (zoo at deneb.cygnus.com)
7377 * configure.in: don't build gas,ld,binutils on for *-*-sysv4
7381 * configure.in (host_tools): Add prms.
7383 Fri Jun 4 13:30:42 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
7385 * Makefile.in: install gcc, do installation of $(INSTALL_MODULES)
7386 with $(FLAGS_TO_PASS) on the command line
7388 * config.sub: Recognize lynx and lynxos
7392 * config.sub: Accept -ecoff*, not just -ecoff.
7396 * Makefile.in (taz): Use .gz suffix instead of .z.
7397 (binutils.tar.gz, gas+binutils.tar.gz, gas.tar.gz): Fixed target
7400 Thu Jun 3 00:27:06 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
7402 * Makefile.in (vault-install): add an 'else true' (for Ultrix)
7404 Wed Jun 2 18:19:16 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
7406 * Makefile.in (install-no-fixedincludes): install gcc last, so
7407 that rebuilds that might happen during 'make install' don't get
7408 bogus gcc include files
7412 Change from Utah for HPPA support:
7413 * config.guess: Recognize hppa1.x-hp-bsd.
7417 * config.guess: Add support for Motorola Delta 68k, up to r3v7.
7420 Tue Jun 1 17:48:42 1993 Rob Savoye (rob at darkstar.cygnus.com)
7422 * config.sub: Add support for rom68k and bug boot monitors.
7426 * Makefile.in: Make all-opcodes depend on all-bfd.
7430 * config.guess: Added special check for i[34]86-univel-sysv4*.
7434 * config.guess: For i[34]86-unknown-sysv4 use UNAME_MACHINE for
7435 the processor rather than assuming i486.
7439 * config.guess: Recognize SunOS6 as Solaris3.
7443 * config.guess: Fix typo. Avoid #elif (not in K&R 1).
7444 Recognize SunOS 5.* only (and not [6-9].*) as being Solaris2.
7448 * build-all.mk (all-cross): New target for Canadian Cross.
7449 Added Q2 go32 targets.
7450 * test-build.mk: Configure go32 cross sparclite-aout and
7451 mips-idt-ecoff -with-gnu-ld. Moved build binary directory from
7452 PARTIAL_HOLE_DIRS to BUILD_HOLES_DIRS.
7454 Mon May 24 15:30:06 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
7456 * configure.in: fix Alpha GDB typo; also, don't build DejaGnu for
7457 GO32 hosted toolchains
7459 Mon May 24 14:18:41 1993 Rob Savoye (rob at darkstar.cygnus.com)
7461 * configure: change so "-exec-prefix" gets passed down rather
7462 than "-exec_prefix" so autoconf generated Makefiles get the
7463 exec_prefix set right.
7465 Fri May 21 10:42:25 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
7467 * config.guess: get the Solaris2 minor version number
7469 * Makefile.in: add standards.texi and make-stds.texi to ETC_SUPPORT
7473 * config.guess: Recognize some Sequent platforms.
7475 Thu May 20 14:33:48 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
7477 * Makefile.in: added the vault-install target
7479 * configure.in: actually use the Sun3 makefile fragment that's in
7480 config, also added the release dir to configdirs
7484 * Makefile.in (taz): Fix modes on stuff in $(TOOL) dir also.
7486 Tue May 18 20:26:41 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
7488 * configure.in: remove some program from Alpha targetted toolchains
7492 * Makefile.in (DISTSTUFFDIRS): Renamed from PROTODIRS. Add ld and
7494 (taz): Run "make diststuff" in those directories instead of "make
7495 proto-dir". Look for "VERSION=" only at start of line in subdir
7496 Makefile. Use "gzip -9" for compression.
7497 (TEXINFO_SUPPORT, DIST_SUPPORT, BINUTILS_SUPPORT_DIRS): New vars.
7498 (binutils.tar.z): New target.
7502 * Makefile.in (taz): Include gpl.texinfo.
7506 * Makefile.in (setup-dirs): Merged into "taz" target.
7507 (taz): Only do `proto-dir' stuff if a directory is actually needed
7512 * Makefile.in (MUNCH_NM): New variable, defined to be $(NM).
7513 (FLAGS_TO_PASS): Pass down MUNCH_NM.
7514 (HOST_CC, HOST_PREFIX, HOST_PREFIX_1): New variables.
7515 (EXTRA_GCC_FLAGS): Pass down HOST_* variables.
7516 (gcc-no-fixedincludes): Correct for current gcc Makefile.
7520 * Makefile.in (make-gdb.tar.Z): Add configure, config.guess,
7521 config.sub, and move-if-change to gdb testsuite distribution
7522 archive, so the testsuite can be extracted, configured, and
7523 run separately from the gdb distribution. Blow away the Chill
7524 tests that require a Chill compiled executable, since GNU Chill
7525 is not yet publically available.
7527 Mon May 10 17:22:26 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
7529 * test-build.mk: set environment variables in a single command,
7530 instead of a list of assignments and exports
7532 * config.guess: recognize Alpha/OSF1 systems
7536 * configure: Change help message to prefer --options rather than
7541 * config.sub: Convergent Tech. "miniframe" uses m68010, sez
7543 * config.guess: Recognize miniframe.
7545 Sun May 9 17:47:57 1993 Rob Savoye (rob at darkstar.cygnus.com)
7547 * Makefile.in: Use srcroot to find runtest rather than rootme.
7548 Pass RUNTESTFLAGS and EXPECT down in BASE_FLAGS_TO_PASS.
7552 * test-build.mk: Extensive additions to support building on a
7553 machine other than the host.
7557 * configure (tooldir): Fix for i386-aix again.
7561 * configure, Makefile.in: Change definition of $(tooldir)
7566 * config.guess: Recognize i[34]86/SVR4.
7570 * Makefile.in (all-gdb): gdb depends on sim.
7574 * Makefile.in (gdb.tar.Z): Make prototype gdb testsuite directory
7575 at the same time we make the prototype gdb directory.
7576 * Makefile.in (make-gdb.tar.Z): Make the testsuite distribution
7577 files at the same time as the gdb base release distribution.
7581 * Makefile.in (check): Use individual check targets rather than
7587 * config.sub: Use sysv3.2 not sysv32 for canonical OS
7588 for System V release 3.2.
7592 * config.sub: Recognize hppaosf.
7593 * configure.in: Do configure ld/binutils/gas for it.
7597 * configure (tooldir): Alter syntax used to set this, for systems
7598 where "\$" isn't handled right, like i386-aix.
7602 * configure: Pass program-transform-name, not
7603 program_transform_name, to recursive configures.
7607 * Makefile.in (gas+binutils.tar.z): New rule for building snapshots
7612 * config.guess: Recognize AIX3.2 as distinct from 3.1.
7614 Sat Apr 17 17:19:50 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
7616 * configure.in: rename m88k-motorola-m88kbcs to m88k-motorola-sysv
7618 * config/mh-delta88: remove extraneous GCC references
7622 * Makefile.in (PRMS): Set back to all-prms.
7626 * test-build.mk: Pass -with-gnu-as for known MIPS native and MIPS
7627 targets, rather than for MIPS hosts.
7629 Fri Apr 9 13:51:06 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
7631 * configure.in: add comment for --with-x default values
7633 * config.guess: handle Motorola Delta88 box for SVR3 and SVR4.
7635 * Makefile.in: add check-* targets for each of the directories in
7636 the tree. Add a definition of RUNTEST that will use the one we
7637 just built, if it exists. Pass this down via FLAGS_TO_PASS.
7641 * configure.in: Removed obsolete references to bfd_target and
7642 target_makefile_frag.
7644 * build-all.mk: Set assorted targets for Q2.
7645 * config.sub: Recognize z8k-sim and h8300-hms.
7646 * test-build.mk: Really don't pass host to configure.
7647 (HOLES): Added uname.
7651 * configure: Handle an empty program-prefix, program-suffix or
7652 program-transform-name correctly.
7656 * build-all.mk: -G 8 no longer required for MIPS targets.
7657 * test-build.mk: Don't pass host argument to configure; make it
7662 * Makefile.in (gdb.tar.Z): Fix for building gzip'd distribution.
7663 * Makefile.in (COMPRESS): New macro, like GZIP.
7667 * test-build.mk: Use -with-gnu-as for mips-sgi-irix4 as well.
7669 * build-all.mk: Set GCC to gcc -O -G 8 for MIPS targets, since gcc
7670 with gas currently defaults to -G 0.
7674 * Makefile.in (all-flex): flex depends on byacc.
7676 * build-all.mk: If host not specified, use config.guess. Pass TAG
7677 to test-build.mk as RELEASE_TAG.
7678 * test-build.mk (configargs): New variable containing arguments to
7679 pass to configure. Set to -with-gnu-as on mips-dec-ultrix.
7680 (FLAGS_TO_PASS): Pass down RELEASE_TAG.
7682 * config.guess: Use /bin/uname when checking -X argument on SCO,
7683 to avoid invoking GNU uname which doesn't understand -X.
7685 * test-build.mk: Don't use /usr/unsupported/bin/as on AIX.
7687 * configure.in: Build gas for mips-*-*.
7691 * Makefile.in (all.normal): insert missing backslash.
7695 * build-all.mk, config/mh-irix4: Bump -XNh value to 1500 to match
7698 * Makefile.in: Complete overhaul to merge many almost identical
7703 * Makefile.in (setup-dirs-gdb): Renamed from setup-dirs.
7704 (gdb.tar.Z): Adjusted.
7706 * Makefile.in (setup-dirs, taz): New targets; should be general
7707 enough to adapt for gdb sometime. Build only .z file.
7708 (gas.tar.z): New target.
7712 * build-all.mk: Use CC=cc -Xs on Solaris.
7714 Mon Mar 29 19:59:26 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
7716 * config/mh-sun3: cc needs -J to compile cp-parse.c correctly
7718 * config/mh-solaris: SunPRO C needs -Xs to be able to get a
7719 working xmakefile for Emacs.
7724 for handling BISON for FSF releases.
7728 * configure: Actually implement the change zoo just documented.
7730 Wed Mar 24 13:02:44 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
7732 * configure: when using config.guess, only set target_alias when
7733 it's not already been set (ie, on the command line)
7735 Mon Mar 22 23:07:39 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
7737 * Makefile.in: add installcheck target, set PRMS to install-prms
7739 Sun Mar 21 16:46:12 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
7741 * configure: add support for package_makefile_fragment, handle the
7742 case where a directory has a configure.in file but no Makefile.in
7743 more gracefully (with an actual understandable error message, even);
7744 add support for --without (and add this to the usage message); also
7745 explicitly add a --host=${host_alias} to the command line when
7746 config.guess is used
7750 * configure: Must use both --host and --target in recursive calls.
7754 * Makefile.in: Change deja-gnu to dejagnu.
7758 * configure.in (h8300-*-*, h8500-*-*): Don't build libg++.
7760 Fri Mar 12 18:30:14 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
7762 * configure.in: canonicalize all instances to *-*-solaris2*,
7763 also strip out a number of tools to not build for go32 host
7767 * config.guess: add GPL.
7769 * Makefile.in, config.guess, config.sub, configure: bump
7774 * Makefile.in (do-info): Removed obsolete check for existence of
7777 * Makefile.in (MAKEOVERRIDES): Define to be empty.
7779 Wed Mar 10 03:11:56 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
7781 * Makefile.in: a couple of 'else true' for decstation,
7784 * configure.in: configure tclX too; don't remove Tk on RS/6000 anymore
7788 * Makefile.in (setup-dirs): change invocation of make to $(MAKE).
7790 Mon Mar 8 14:52:11 1993 Ken Raeburn (raeburn@cambridge)
7792 * config.guess: Recognize i386-ibm-aix (PS/2).
7793 * configure.in: Use config/mh-aix386 file for it.
7797 * Makefile.in (GCC_FOR_TARGET): Eliminated definition; use
7798 CC_FOR_TARGET instead.
7799 (BASE_FLAGS_TO_PASS): Pass GCC_FOR_TARGET=$(CC_FOR_TARGET).
7803 * Makefile.in: Add sim to list of directories sent with gdb
7807 * configure.in: Put back mips-dec-bsd* case.
7812 * configure.in (vax-*-ultrix2*): Add Ultrix 2.2 triplet.
7813 * config.guess: Change 'VAX*:ULTRIX:*:*' to 'VAX*:ULTRIX*:*:*'.
7814 * config/mh-vaxult2: New file.
7816 Tue Mar 2 18:11:03 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
7818 * configure.in: remove no-op mips-dec-bsd* in "case $target"
7820 * Makefile.in (dir.info): only run gen-info-dir if it exists,
7821 (install-info): install dir.info only if it exists,
7822 (all-expect, install-expect): pass along X11_FLAGS_TO_PASS
7826 * configure.in: For vms target, skip bfd, ld, binutils. Do build
7827 gas for mips-dec-bsd.
7831 * configure (makesrcdir): If ${srcdir} is relative and not ".",
7832 and ${subdir} is not ".", set makesrcdir based on ${invsubdir}.
7836 * configure.in: Added "dejagnu" to hosttools list.
7840 * config.sub, configure.in, config.guess: Add support
7841 for Bosx, an AIX variant from Bull.
7846 * devo/dejagnu: Initial creation of devo/dejagnu.
7847 Migrated dejagnu testcases and support files for testing software
7848 tools to reside as subdirectories, currently called "testsuite",
7849 within the directory of the software tool. Migrated all programs,
7850 support libraries, etc. beloging to dejagnu proper from
7851 devo/deja-gnu to devo/dejagnu. These files were moved "as is"
7852 with no modifications. The changes to these files which will
7853 allow them to configure, build, and execute properly will be made
7858 * Makefile.in: Change send_pr to send-pr.
7859 * configure.in: Likewise.
7860 * send_pr: Renamed directory to send-pr.
7864 * Makefile.in: Add some extra semi-colons (needed if SHELL=bash).
7868 * README: Update for gdb-4.8 release.
7869 * Makefile.in (gdb.tar.Z): Add texinfo/tex3patch. Build
7870 gdb-xxx.tar.z (gzip'd) file also.
7872 Thu Feb 18 09:16:17 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
7874 * Makefile.in: make all-diff depend on all-libiberty
7878 * config.guess: add vax-ultrix in the spirit of mips-ultrix.
7880 Tue Feb 16 05:57:15 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
7882 * configure.in, Makefile.in: add hello, tar, gzip, recode, indent
7886 * Makefile.in (DEVO_SUPPORT): Remove etc directory
7887 (ETC_SUPPORT): Only add the files GDB wants from etc/.
7888 (gdb.tar.Z): Use ETC_SUPPORT. Use byacc when building the file.
7890 Thu Feb 11 20:14:28 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
7892 * Makefile.in: makeinfo binary is in a new location
7896 * config.sub: Accept -ecoff as an OS.
7898 * Makefile.in: Various changes to eliminate a level of make
7899 recursion and reduce the required command line length.
7900 (BASE_FLAGS_TO_PASS): New variable holding flags passed to all
7902 (EXTRA_HOST_FLAGS, EXTRA_TARGET_FLAGS, EXTRA_GCC_FLAGS): New
7903 variables holding settings for specific sub-makes.
7904 (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS, GCC_FLAGS_TO_PASS): Rewrote
7905 in terms of BASE_FLAGS_TO_PASS.
7906 (TARGET_LIBS): New variable listing directories which use
7907 TARGET_FLAGS_TO_PASS.
7908 (subdir_do): Eliminated.
7909 (do-*): New set of targets to replace subdir_do.
7910 (various): All targets which used subdir_do now depend on do-*.
7911 (local-clean): Renamed from do_clean.
7912 (local-distclean): New target, dependency of distclean and
7914 (install-info): Don't create directories. Depend on dir.info
7915 rather than calling make recursively.
7916 (install-dir.info): Eliminated.
7917 (install-info-dirs): Create all info directories here.
7918 (dir.info): Depend upon do-install-info.
7920 * test-build.mk (HOLES): Added false.
7924 * config.guess: Recognize BSDI and BSDJ (Jolitz 386bsd).
7926 Thu Feb 4 20:49:18 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
7928 * Makefile.in (info): remove dependency on all-texinfo. The
7929 problem was really in texinfo/C, not at this level.
7933 * Makefile.in (info): Added dependency on all-texinfo (PR 2112).
7937 * Makefile.in (make-gdb.tar.Z): Change BISON to 'bison -y' for
7942 * configure: Include srcdir in message about target of link not
7943 being found. Don't convert `-' to `_' in `with' options being
7946 Tue Feb 2 18:57:59 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
7948 * configure.in: add uudecode to host_tools
7950 * Makefile.in: added {all,install}-uudecode targets, added them to
7951 the appropriate lists
7955 * Makefile.in (all-gcc): Added dependency on all-gas.
7957 * configure.in (mips-*-*): Build ld and binutils.
7961 * configure: check return code from mkdir, print error message and
7966 * Makefile.in (make-gdb.tar.Z): New location for texinfo.tex.
7970 * test-build.mk (HOLES): Added tar, cpio and uudecode.
7974 * config.sub (h8500): Recognize this as a cpu type.
7976 Sat Jan 23 20:32:01 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
7978 * configure: source directory missing is no longer a warning
7980 * configure.in: recognize irix[34]* instead of irix[34]
7982 * Makefile.in: define and pass down X11_LIB
7984 * config/mh-sco: define X11_LIB to the mess that SCO ODT requires
7988 * guess-systype: Renamed to ...
7989 * config.guess: ... by popular request.
7990 * configure.in, Makefile.in: Update accordingly.
7995 + Add Convex, Cray/Unicos, and Encore/Multimax support.
7996 + Execute ./dummy instead of assuming . is in PATH.
8000 * guess-systype: New shell script. Attempts to guess the
8001 canonical host name of the executing host.
8002 Only a few hosts are supported so far.
8003 * configure: Call guess-systype if no host is specified.
8007 * Makefile.in (gcc-no-fixedincludes): Made to work with current
8013 * Makefile.in (GCC_FLAGS_TO_PASS): New variable.
8014 (all-gcc, install-gcc, subdir_do): Use it.
8018 * Makefile.in: Rename uninstalled gcc driver from gcc to xgcc.
8022 * Makefile.in: Removed explicit setting of SUBDIRS. SUBDIRS is now
8023 set exclusively by configure, using configure.in .
8025 Wed Jan 6 13:44:11 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8027 * test-build.mk: set $PATH for all builds
8029 * Makefile.in: pass TARGET_FLAGS_TO_PASS for xiberty and libm
8033 * Makefile.in (GCC_FOR_TARGET): Supply a default that matches
8034 the one used in gcc/Makefile.in, so that a null expansion doesn't
8035 override the one needed to build gcc with a native cc.
8040 * configure: Accept -with arguments.
8044 * Makefile.in: added h8300sim
8048 * config/mh-sco: Don't override BISON definition.
8050 * build-all.mk: If canonhost is i386-unknown-sco3.2v4, change it
8051 to i386-sco3.2v4. Set TARGETS and CFLAGS for i386-sco3.2v4.
8052 (all-cygnus, native, build-cygnus): Make
8053 $(canonhost)-stamp-3stage-done, not $(host)....
8054 * test-build.mk (stamp-3stage-compared): Use tail +10c for
8055 i386-sco3.2v4. Added else true to if command.
8059 * config.sub: (from FSF) Sequent uses a BSD-like OS.
8063 * configure.in (i[34]86-*-isc*): added; uses mh-sysv.
8065 Thu Dec 24 17:26:24 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8067 * configure.in: don't remove binutils from Solaris builds
8071 * Makefile.in: get rid of earlier definitions for *clean,
8072 also handle the recursive info rule better
8076 * Makefile.in (mostlyclean, distclean, realclean): Fix to
8077 do more-or-less the right thing.
8081 * Makefile.in: Add lines defining CC and CXX, and use CXX rather
8082 than gcc in definitions of CXX_FOR_BUILD and CXX_FOR_TARGET.
8084 Tue Dec 15 00:34:32 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8086 * Makefile.in: change all $(host_cpu)-$(host_vendor)-$(host_os) to
8089 * configure.in: split the configdirs list into 4 categories (native
8090 v. cross, library v. tool) and handle the cross-only and native-
8091 only in more reasonable (and correct!) way.
8093 Mon Dec 14 17:04:22 1992 Stu Grossman (grossman at cygnus.com)
8095 * configure.in (hppa*-*-*): Don't remove bfd and gdb from
8098 Sun Dec 13 00:37:26 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8100 * Makefile.in: extensive cleanup:: removed all of the explicit
8101 clean-* targets, collapsed many wrappers around subdir_do into
8102 one, added additional targets to satisfy standards.texi, deleted
8103 some old targets, some changes for consistency
8105 Fri Dec 11 20:18:02 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8107 * configure.in: handle some programs as cross-only, and others as
8110 * test-build.mk: handle partial holes in a more generic manner
8112 * Makefile.in: m4 depends on libiberty
8114 Mon Dec 7 06:43:27 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8116 * config/mh-sco: don't default $(CC) to gcc
8118 Thu Dec 3 21:52:11 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8120 * configure.in: add m4, textutils, fileutils, sed, shellutils,
8121 time, wdiff, and find to configdirs
8123 * Makefile.in: all, clean, and install rules for the new programs
8124 added to configure.in
8126 Mon Nov 30 14:54:34 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8128 * configure.in: use mh-sun for all *-sun-* hosts
8130 * config/mh-solaris: rework standard X location to use
8131 $OPENWINHOME, if defined.
8133 * config/mh-sun: handle X11 include locations
8135 * config/mh-decstation: define NeedFunctionPrototypes to 0, to
8136 work around dain-bramaged DECwindows include files
8138 Fri Nov 27 18:35:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8140 * Makefile.in: define flags for X11 include files and library file
8141 locations, pass them down to the programs that need this info
8143 * build-all.mk: added a 'native' target, to 3stage the native toolchain
8145 * config/{mh-hpux,mh-solaris}: define the "standard" locations for
8146 the vendor supplied X11 headers and libraries
8148 Sun Nov 22 18:59:13 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8150 * configure.in: start building libg++ for HP-UX targets
8154 * README: Update references to files moved into etc/.
8158 * config.sub (i386sol2, i486sol2): i[34]86-unknown-solaris2.
8159 * configure.in (i[34]86-*-solaris2*): Use config/mh-sysv4.
8163 * configure: accept dash as well as underscore in long option
8164 names for FSF compatibility.
8168 * config.sub: added -sco3.2v4 support from FSF.
8170 Sun Nov 8 21:14:30 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8172 * configure.in: expand the section that adds or removes
8173 directories from the list of programs to build, to handle native
8174 vs. cross in addition to host v. native
8178 * Makefile.in: Replace C++ in macro names with CXX.
8179 This is less likely to break ...
8181 Sat Nov 7 15:16:58 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8183 * test-build.mk: add -w to GNU_MAKE
8185 Fri Nov 6 23:10:37 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8187 * config.sub: remove 'sparc'-->'sparc-sun' default transformation,
8188 add 'sparc' to list of recognized cpus. This needed to make
8189 'sparc-aout' expand to 'sparc-unknown-aout' instead of 'sparc-sun-aout'.
8190 Delete some redundant ose68 variants. Recognize -wrs as an os,
8191 then changes that into $CPU-wrs-vxworks.
8193 * configure.in: remove most references to gdbtest, regularize
8194 target based program removal
8196 * test-build.mk: import from p3 tree (many fixes and changes)
8200 * Makefile.in: added rules to handle tcl, tk, and expect
8202 * configure.in: handle those directories if they exist
8204 Thu Nov 5 14:35:41 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8206 * config.sub: removed bogus hppabsd and hppahpux names, since
8207 "hppa" is not a valid cpu (hppa1.1 or hppa1.0 are, though)
8209 Thu Oct 29 00:12:41 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8211 * Makefile.in: all-gcc now depends on all-binutils. all-libg++
8212 depends upon all-xiberty
8214 * Makefile.in: changes from p3, including:
8218 * Makefile.in (XTRAFLAGS): include newlib directories if
8219 newlib/Makefile exists, rather than if host != target.
8223 * Makefile.in: added -nostdinc to XTRAFLAGS if we are using gcc
8224 from the same source tree and not building a cross-compiler. This
8225 matters for the libg++ configuration if reconfiguring a tree that
8226 has already been installed.
8230 * Makefile.in: added -I for newlib/targ-include to XTRAFLAGS, to
8231 pick up the machine and system specific header files.
8233 * Makefile.in: added AS_FOR_TARGET, passed down in
8234 TARGET_FLAGS_TO_PASS. Added CC_FOR_BUILD, which is intended to be
8235 the C compiler to use to create programs which are run in the
8236 build environment, set it to default to $(CC), and passed it down
8237 in FLAGS_TO_PASS and TARGET_FLAGS_TO_PASS.
8241 * Makefile.in: add $(host) = $(target) tests back to *_FOR_TARGET.
8242 We need them for unusual native builds, like systems without
8245 * configure: also define $(host_canonical) and
8246 $(target_canonical), which are the full, canonical names for the
8247 given host and target
8251 * Makefile.in: Added separate definitions for C++.
8255 * configure.in (configdirs): Add deja-gnu.
8259 * README: Update for configure.texi and gdb-4.7 release.
8263 * Makefile.in: Move "all" target to top of file.
8264 Previously, first target was ".PHONY" which caused BSD4.4 make
8265 to build .PHONY when make was run without arguments.
8269 * Makefile.in: Add COPYING.LIB to GDB releases, now that there's
8270 Library-copylefted code in libiberty.
8274 * config.sub: Replace m68kmote with plain old m68k.
8278 * Makefile.in: Remove space from blank line, avoid Make complaints.
8282 * config.sub: Complain if no argument is given. Added support for
8283 386bsd as OS and target alias.
8287 * Makefile.in (XTRAFLAGS): include newlib directories if
8288 newlib/Makefile exists, rather than if host != target.
8290 Mon Oct 5 03:00:09 1992 Mark Eichin (eichin at tweedledumber.cygnus.com)
8292 * config.sub: recognize sparclite-wrs-vxworks.
8294 * Makefile.in (install-xiberty): added *-xiberty make rules (from
8295 p3.) Added clean-xiberty to clean.
8297 Thu Oct 1 17:59:19 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8299 * configure.in: use *-*-* instead of nested cases for host and target
8303 * Makefile.in: added -nostdinc to XTRAFLAGS if we are using gcc
8304 from the same source tree and not building a cross-compiler. This
8305 matters for the libg++ configuration if reconfiguring a tree that
8306 has already been installed.
8310 * config.sub (i486v/i486v4): Merge in from FSF version.
8314 * configure: only set PWD if it is already set.
8318 * configure: just set PWD=`pwd` at the top, since Ultrix sh
8319 doesn't have unset and all success paths (and most error paths)
8320 out set it anyway. (Note: should change all uses of ${PWD=`pwd`}
8321 to just ${PWD} to avoid confusion.)
8325 * configure: always set $(tooldir) to $(libdir)/$(target_alias),
8326 even for a native compilation.
8330 Changes to make the gdb.tar.Z rule work better.
8332 * Makefile.in (GDB_SUPPORT_DIRS): Add opcodes.
8333 (DEVO_SUPPORT): Add configure.texi.
8334 (bfd-ilrt.tar.Z): Remove ancient rule.
8338 * Makefile.in: added -I for newlib/targ-include to XTRAFLAGS, to
8339 pick up the machine and system specific header files.
8341 * configure.in, config.sub: added new target m68010-adobe-scout,
8342 with alias of adobe68k. Changed configure.in to check for
8343 -scout before -sco* to avoid a false match.
8345 * Makefile.in: added AS_FOR_TARGET, passed down in
8346 TARGET_FLAGS_TO_PASS. Added CC_FOR_BUILD, which is intended to be
8347 the C compiler to use to create programs which are run in the
8348 build environment, set it to default to $(CC), and passed it down
8349 in FLAGS_TO_PASS and TARGET_FLAGS_TO_PASS.
8353 * Makefile.in: added TARGET_FLAGS_TO_PASS, CC_FOR_TARGET,
8354 AR_FOR_TARGET, RANLIB_FOR_TARGET, NM_FOR_TARGET. Pass
8355 TARGET_FLAGS_TO_PASS, which defines CC, AR, RANLIB and NM as the
8356 FOR_TARGET variants, to newlib and libg++.
8360 * Makefile.in (all-gas, all-gdb): Require all-opcodes to be built
8365 * config.sub: Accept `elf' as an environment.
8369 * Makefile.in (all-opcodes): cd into the right directory
8373 * configure: added -program_transform_name option, used as
8374 argument to sed when installing programs.
8375 configure.texi: added documentation for -program_prefix,
8376 -program_suffix and -program_transform_name.
8380 * config.sub: Accept i486 where i386 ok.
8384 * config.sub: accept we32k
8388 * config.sub, configure.in: accept OSE68000 and OSE68k.
8390 * Makefile.in: don't create all directories for ``make install'';
8391 let the subdirectories create the ones they need.
8393 Tue Aug 11 23:13:17 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8395 * COPYING: new file, GPL v2
8397 Tue Aug 4 01:12:43 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8399 * Makefile.in: use the new gen-info-dir, which needs a template
8400 argument (which also lives in texinfo)
8402 * configure.texi, standards.texi: fix INFO-DIR-ENTRY
8404 Mon Aug 3 15:41:28 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8406 * config/mh-solaris: removed the -xs from CFLAGS (let the people
8407 with Sun's C compiler deal with it themselved)
8411 * config.sub (ncr3000): Change i386 to i486.
8413 Thu Jul 23 00:12:17 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8415 * Makefile.in: add install-rcs, install-grep to
8416 install-no-fixedincludes, removed install-bison and install-libgcc
8420 * configure.in: grab the HPUX makefile fragment if on HPUX
8424 * Makefile.in: eradicate bison spoor (ditto libgcc).
8425 configure.in: recognise m68{k,000}-ericsson-OSE.
8426 es1800 is alias for m68k-ericsson-OSE
8428 Sun Jul 19 17:49:02 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8430 * configure.in: rearrange the parts that remove programs from
8431 configdirs, based now on HOST==TARGET or by canonical triple.
8435 * test-build.mk: recurse explicitly with -f test-build.mk when
8436 appropriate. predicate stage3 and comparison on the existence
8437 of gcc. That is, if gcc isn't around, we aren't three-staging.
8438 On very clean, also remove ...stamp-co. Build in-place before
8443 * Makefile.in, configure.in: add tgas
8447 * Makefile.in: a number of changes merged in from progressive.
8449 * configure.in: add libm.
8451 * .cvsignore: ignore some stuff that comes from test-build.mk.
8453 Wed Jul 8 00:01:30 1992 Stu Grossman (grossman at cygnus.com)
8455 * config/mh-solaris: Use -xs when compiling so that Sun-C puts
8456 a symbol-table into the executable.
8460 * config.sub: Add es1800 (m68k-ericsson-es1800).
8464 * configure: Add program_suffix (parallel to program_prefix)
8465 * Makefile.in: adjust directory-creating script for losing decstation
8469 * configure: Minor $subdir-related fixes.
8473 * configure: fix various problems with propogating
8474 makefile_target_frag in subdirs.
8475 * configure.in: config libgcc if its there
8477 Fri Jun 19 15:19:40 1992 Stu Grossman (grossman at cygnus.com)
8479 * config.sub: HPPA merge.
8483 * config/mh-ncr3000 (INSTALL): Don't use /usr/ucb/install,
8484 it is broken on ncr 3000's.
8486 Sun Jun 14 10:29:19 1992 John Gilmore (gnu at cygnus.com)
8488 * Makefile.in: Replace all-bison with all-byacc in all
8489 dependency lines for other tools (which now use byacc).
8491 Fri Jun 12 22:21:57 1992 John Gilmore (gnu at cygnus.com)
8493 * config.sub: Add sun4sol2 => sparc-sun-solaris2.
8495 Tue Jun 9 17:18:11 1992 Fred Fish (fnf at cygnus.com)
8497 * config/{mh-ncr3000, mh-sysv4}: Add INSTALL.
8501 * Makefile.in: make gprof rules similar to byacc rules (instead of
8502 vestigal $(unsubdir) that didn't work...)
8506 * config.sub: Add support for Linux.
8507 * Makefile.in: Use $(FLAGS_TO_PASS) more consistently
8508 (at least for libg++).
8512 * configure.texi: fix doc for the -nfp option to configure
8516 * Makefile.in (all-binutils): ar needs flex, so depend on all-flex.
8518 Sun May 31 15:04:08 1992 Mark Eichin (eichin at cygnus.com)
8520 * config.sub: changed [^-]+ to [^-][^-]* so that it works under
8521 Sun sed. (BSD 4.3 sed doesn't handle [^-]+ either.)
8522 * configure.in: added solaris* host_makefile_frag hook.
8524 Sun May 31 01:10:34 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8526 * config.sub: changed recognition of m68000 so that various
8527 m68k types can be specified via m680[01234]0
8529 Sat May 30 21:01:06 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8531 * config.sub (basic_machine): fix sed so that '-foo' isn't
8532 completely substituted out while .+'-foo' loses the '-foo'
8536 * config.sub ($os): Add -aout.
8540 * configure: If host_makefile_frag is absolute, don't
8541 prefix ${invsubdir} (relevant to libg++ auto-configure).
8545 * Makefile.in (tooldir): Define it.
8546 (all-ld): Depend on all-flex.
8550 * Makefile.in (check): Fix libg++ special case.
8554 * configure: do not bury `pwd` into config.status, thus do fewer
8557 * configure: print the "Building in" message only when building in
8558 other than "." AND verbose.
8560 * configure: remove -s, rework -v to better accomodate guested
8563 * standards.texi: updated to 3 may, fixed librid <-> libdir typo.
8567 * Makefile.in: macroize flags passed on recursion. remove
8572 * configure: get makesrcdir right for subdirs deeper than 1.
8574 * Makefile.in: pass INSTALL, INSTALL_DATA, INSTALL_PROGRAM on
8579 * Makefile.in: don't print subdir_do or recursion lines.
8583 * standards.texi: added menu item.
8585 * Makefile.in: build and install standards.info.
8587 * standards.texi: new file.
8591 * configure: test for and move config.status pieces from
8596 * config/mh-delta88, config/mh-ncr3000: Replace MINUS_G with
8597 CFLAGS per new configuration strategy.
8598 * configure: Test for existance of files before trying to mv
8599 them, to avoid numerous non-existance messages.
8603 * configure: correct final line of config.status.
8605 * configure: patch from eggert. Avoids a protection problem if
8606 the original Makefile.in is read only.
8608 * configure: use move-if-change from gcc to create config.status.
8609 Some makefiles depend on config.status to tell if a directory
8610 has been reconfigured for a different host. This change
8611 prevents those directories from remaking everything in the case
8612 where the reconfig was only intended to rebuild a Makefile.
8614 * configure: test for config.sub with "config.sub sun4" rather
8615 than "config.sub ${host_alias}". Otherwise we can't tell a bad
8616 host alias from a missing config.sub.
8620 * Makefile.in: explicitly pass CFLAGS on recursion. no longer pass
8621 MINUS_G (this can be done with CFLAGS). Default CFLAGS to -g.
8625 * configure: mkdir ${subdir} as needed.
8629 * Makefile.in,configure.in: added autoconf.
8633 * Makefile.in: no longer pass against on recursion.
8635 * Makefile.in: added .NOEXPORT: so that stray makefile_frag
8636 definitions are not inherited.
8638 * configure: correct makesrcdir when subdir is .
8642 * configure: Add support for 'subdirs' variable, which is
8643 like 'configdirs', except that configure doesn't re-invoke
8644 itself for subdirs, it just creates a Makefile for each subdir.
8645 * configure.texi: Document subdirs.
8647 Mon Apr 13 18:50:16 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8649 * configure.in: added flex to configdirs
8653 * Makefile.in: remove clean-stamps from clean.
8655 Sat Apr 11 03:52:03 1992 John Gilmore (gnu at cygnus.com)
8657 * configure.in: Add gdbtest to configdirs.
8661 * Makefile.in (MINUS_G): Add macro, default to -g, pass on
8663 * configure.in: Recognize new ncr3000 config.
8667 * Makefile.in, configure.in: removed references to gdbm.
8671 * config.sub: Don't canonicalize os value
8672 newsos* to bsd (readline needs to check for newsos).
8673 (This fix was earlier made Jan 31, but got re-broken.)
8675 Mon Apr 6 14:34:08 1992 Stu Grossman (grossman at cygnus.com)
8677 * configure.in: sco is an os, not a vendor!
8679 * configure: Quote $( better. Keep various shells happy.
8683 * Makefile.in: eliminate stamp-files.
8687 * Makefile.in: add send_pr. remove "force" from .stmp-gprof rule.
8688 Supress echoing of all the "if [ -d ... $(MAKE)" lines.
8692 * config.sub: fix iris/iris3.
8696 * configure: re-add -rm.
8700 * Maskefile.in: add .stmp-rcs to all.
8702 * configure.in: remove gas from rs6000 build, use aix host fragment.
8706 * configure: pass down site_option during recursion.
8708 Thu Mar 19 16:49:36 1992 Stu Grossman (grossman at cygnus.com)
8710 * Makefile.in (all.cross): Add .stmp-bfd .stmp-readline.
8714 * configure: Change exec_prefix so that it really defaults to prefix.
8718 * Makefile.in, configure.in: Add support for mmalloc library.
8722 * Makefile.in: add stmp dependencies for a few more things.
8726 * configure: adjusted error message on objdir/srcdir configure
8727 collision, per john's suggestion.
8729 * Makefile.in: add libiberty stmp to all and all.cross.
8733 * Makefile.in: remove force dependencies, add grep to all.
8737 * Makefile.in: drop flex. make stamp files work.
8739 * configure: added test for conflicting configuration in srcdir,
8740 remove trailing slashes from srcdir. Otherwise emacs gdb mode
8741 gets cranky. use relative paths for configure and srcdir
8742 whenever possible. Send some error messages to stderr that were
8747 * Makefile.in: Fix libg++ rule to check for gcc directory
8748 before using gcc/gcc. Also pass XTRAFLAGS.
8750 Thu Mar 5 21:45:07 1992 K. Richard Pixley (rich@sendai)
8752 * Makefile.in: added stmp-files so that directories aren't polled
8753 when they are already built.
8755 * configure.texi: fixed a node pointer problem.
8757 Thu Mar 5 12:05:58 1992 Stu Grossman (grossman at cygnus.com)
8759 * config.sub configure.in config/mh-irix4 gdb/configure.in
8760 gdb/mips-tdep.c gdb/mipsread.c gdb/procfs.c gdb/signame.h
8761 gdb/tm-irix3.h gdb/tm-mips.h gdb/xm-irix4.h gdb/config/mt-irix3
8762 gdb/config/mh-irix4 texinfo/configure.in: Port to SGI Irix-4.x.
8766 * configure: -recurring becomes -silent. corrected help message
8769 * Makefile.in: mkdir $(exec_prefix) and $(tooldir).
8773 * configure: when building Makefile for crosses, replace
8774 tooldir and program_prefix. default srcdir from location of
8775 config.sub. remove "for host in hosts" and "for target in
8780 * Makefile.in: Do not pass bindir or mandir to cvs.
8784 * Makefile.in, configure.in: removed traces of namesubdir,
8785 -subdirs, $(subdir), $(unsubdir), some rcs triggers. Forced
8786 copyrights to '92, changed some from Cygnus to FSF.
8788 * configure.texi: remove most references to multiple hosts,
8789 multiple targets, subdirs, etc.
8791 * configure.man: removed rcsid. reference config.sub not
8794 * Makefile.in: mkdir $(infodir) on install-info.
8796 Wed Feb 19 15:41:13 1992 John Gilmore (gnu at cygnus.com)
8798 * configure.texi: Explain better about .gdbinit and about
8799 the environment that configure.in sections run in.
8801 Fri Feb 7 07:55:00 1992 John Gilmore (gnu at cygnus.com)
8803 * configure.in: Ultrix is only a decstation if it's a MIPS.
8805 Fri Jan 31 21:54:51 1992 John Gilmore (gnu at cygnus.com)
8807 * README: DOC.configure => cfg-paper.texi.
8809 Fri Jan 31 21:48:18 1992 Stu Grossman (grossman at cygnus.com)
8811 * config.sub (near case $os): Don't convert newsos* to bsd!
8813 Fri Jan 31 02:27:32 1992 John Gilmore (gnu at cygnus.com)
8815 * Makefile.in: Reinstall change from gdb-4.3 that reduces
8816 the number of copies of COPYING that go into the GDB tar file.
8818 Thu Jan 30 16:17:30 1992 Stu Grossman (grossman at cygnus.com)
8820 * bfd/configure.in, config/mh-sco, gdb/config/mh-i386sco,
8821 gdb/config/mt-i386v32, gdb/configure.in, readline/configure.in:
8822 Fix SCO configuration stuff.
8824 Tue Jan 28 23:51:07 1992 Per Bothner (bothner at cygnus.com)
8826 * Makefile.in: For libg++, make sure the -I pointing
8827 to the gcc directory goes *after* all the libg++-local -I flags.
8828 Also, move just-gcc dependency from just-libg++ to all-libg++.
8830 Tue Jan 28 12:56:24 1992 Stu Grossman (grossman at cygnus.com)
8832 * configure: Change -x to -f to keep Ultrix /bin/test happy.
8834 Sat Jan 18 17:45:11 1992 Stu Grossman (grossman at cygnus.com)
8836 * Makefile.in (make-gdb.tar.Z): Remove texinfo targets.
8838 Sat Jan 18 17:03:21 1992 Fred Fish (fnf at cygnus.com)
8840 * config.sub: Add stratus configuration frags. Also
8843 Sat Jan 18 15:35:29 1992 Stu Grossman (grossman at cygnus.com)
8845 * Makefile.in (DEV_SUPPORT): add configure.man.
8847 * config.sub(Decode manufacturer-specific): add -none*.
8849 Fri Jan 17 17:58:05 1992 Stu Grossman (grossman at cygnus.com)
8851 * Makefile.in: remove form feeds to make Sun's make happy.
8852 (DEVO_SUPPORT): DOC.configure => cfg-paper.texi.
8854 Sat Jan 4 16:11:44 1992 John Gilmore (gnu at cygnus.com)
8856 * Makefile.in (AR_FLAGS): Make quieter.
8858 Thu Jan 2 22:57:12 1992 John Gilmore (gnu at cygnus.com)
8860 * configure.in: Add libg++.
8861 * configure: When verbose, don't output the command line at each
8862 level; it will be unremarkably the same as the previous version,
8863 which will be the same as what the user typed.
8865 Fri Dec 27 16:26:47 1991 K. Richard Pixley (rich at cygnus.com)
8867 * configure.in, Makefile.in: fix clean-info, add flex. add
8870 * configure: be less sensitive to spaces in Makefile.in. Do not
8871 look for sources in "..". Doing so breaks subdirectories that
8872 might have their own configure. If a subdir has it's own
8873 configure script, use it.
8875 Thu Dec 26 16:30:26 1991 K. Richard Pixley (rich at cygnus.com)
8877 * cfg-paper.texi: some changes suggested by rms.
8879 Thu Dec 26 10:13:36 1991 Fred Fish (fnf at cygnus.com)
8881 * config.sub: Merge in some small additions from the FSF version,
8882 taken from the gcc distribution, to bring the Cygnus and FSF
8883 versions into closer sync.
8885 Fri Dec 20 11:34:18 1991 Fred Fish (fnf at cygnus.com)
8887 * configure.in: Changed svr4 references to sysv4.
8889 Thu Dec 19 15:54:29 1991 K. Richard Pixley (rich at cygnus.com)
8891 * configure: added -V for version number option.
8893 Wed Dec 18 15:39:34 1991 K. Richard Pixley (rich at cygnus.com)
8895 * DOC.configure, cfg-paper.texi: revised, updated, and texinfo'd.
8896 renamed from DOC.configure to cfg-paper.texi.
8898 Mon Dec 16 23:05:19 1991 K. Richard Pixley (rich at rtl.cygnus.com)
8900 * configure, config.subr, config.sub: config.subr is now
8903 Fri Dec 13 01:17:06 1991 K. Richard Pixley (rich at cygnus.com)
8905 * configure.texi: new file, in progress.
8907 * Makefile.in: build info file and install the man page for
8910 * configure.man: new file, first cut.
8912 * configure: find config.subr again now that configuration "none"
8913 has gone. removed all traces of the -ansi option. removed all
8914 traces of the -languages option.
8916 * config.subr: resync from rms.
8918 1991-12-11 K. Richard Pixley (rich at rtl.cygnus.com)
8920 * configure, config.sub, config.subr: merge config.sub into
8921 config.subr, call the result config.subr, remove config.sub, use
8924 * Makefile.in: revised install for dir.info.
8926 1991-12-10 K. Richard Pixley (rich at rtl.cygnus.com)
8928 * configure.in: add decstation host makefile frag.
8930 * Makefile.in: BISON now bison -y again. also install-gcc on
8931 install. clean-gdbm on clean. infodir belongs in datadir.
8932 Make directories for info install. Build dir.info here then
8935 1991-12-09 K. Richard Pixley (rich at rtl.cygnus.com)
8937 * Makefile.in: fix for bad directory tests.
8939 1991-12-07 K. Richard Pixley (rich at rtl.cygnus.com)
8941 * configure: \{1,2\} appears to be a sysv'ism. Use a different
8942 regexp. -srcdir relative was being handled incorrectly.
8944 * Makefile.in: unwrapped some for loops so that parallel makes
8945 work again and so one can focus one's attention on a particular
8948 1991-12-06 K. Richard Pixley (rich at rtl.cygnus.com)
8950 * configure: added PWD as a stand in for `pwd` (for speed). use
8951 elif wherever possible. make -srcdir work without -objdir.
8952 -objdir= commented out.
8954 1991-12-05 K. Richard Pixley (rich at rtl.cygnus.com)
8956 * configure: +options become --options. -subdirs commented out.
8957 added -host, -datadir. Renamed -destdir to -prefix. Comment in
8958 Makefile now at top of generated Makefile. Removed cvs log
8959 entries. added -srcdir. create .gdbinit only if there is one
8962 * Makefile.in: idestdir and ddestdir go away. Added copyrights
8963 and shift gpl to v2. Added ChangeLog if it didn't exist. docdir
8964 and mandir now keyed off datadir by default.
8966 1991-11-22 K. Richard Pixley (rich at rtl.cygnus.com)
8968 * Freshly created ChangeLog.
8975 version-control: never