4 * arm-tdep.c (solib-svr4.h): Include.
5 (arm_linux_svr4_fetch_link_map_offsets): New function.
6 * config/arm/tm-linux.h (SVR4_FETCH_LINK_MAP_OFFSETS): Define.
7 (arm_linux_svr4_fetch_link_map_offsets): Declare.
11 * values.c (value_primitive_field): Add embedded_offset to the
12 address of structure members.
13 * gnu-v3-abi.c (gnuv3_rtti_type): Cast to base type before
14 attempting to access vtable pointer. Set using_enc_p if we cast.
15 (gnuv3_virtual_fn_field): Call value_cast with structure rather than
16 structure pointer. Cast to base type before attempting to access
21 * Makefile.in (ppc-linux-nat.o): Add dependency on ppc-tdep.h.
23 * ppc-tdep.h (PPC_GPLAST_REGNUM): Define.
25 * ppc-linux-nat.c: Include ppc-tdep.h.
26 (ppc_register_u_addr): Don't use the static array regmap[],
27 dynamically define the mapping instead.
28 (supply_gregset): Ditto.
29 (fill_gregset): Ditto.
30 (COPY_REG): Delete macro defintion.
31 (regmap): Delete array.
35 Tighten up GDB's support for returning structs by value.
36 * s390-tdep.c (s390_use_struct_convention): New function.
37 (s390_gdbarch_init): Register it as the S/390's
38 USE_STRUCT_CONVENTION method. Register
39 generic_cannot_extract_struct_value_address as our
40 EXTRACT_STRUCT_VALUE_ADDRESS method.
41 * arch-utils.c (generic_cannot_extract_struct_value_address): New
43 * arch-utils.h: Add corresponding prototype.
45 * values.c (value_being_returned): Make error message a proper
50 * dwarf2read.c (read_attribute_value): New function to handle
52 (read_attribute): uses read_attribute_value
56 * s390-tdep.c (s390_frame_saved_pc_nofix): If the prologue didn't
57 save the return address register, assume that the return address
62 * MAINTAINERS: Clarify obvious fix a little (as suggested by Eli
67 * mn10300-tdep.c (mn10300_analyze_prologue): Doc fixes.
71 * s390-tdep.c: Get frame chains and saved pc values properly from
73 (s390_frame_saved_pc_nofix): if `*fi' is a dummy frame, get the
74 saved PC from the dummy frame's registers.
75 (s390_frame_chain): Same for the saved SP.
76 (s390_gdbarch_init): Register `generic_save_dummy_frame_tos' as
77 the `SAVE_DUMMY_FRAME_TOS' method, so the dummy frame's `top' gets
80 * s390-tdep.c (s390_frame_chain): Remember that the SP's element
81 of the frame's saved_regs array is special.
83 * s390-tdep.c (register_names): Call the general-purpose registers
84 `r0' -- `r15', and the floating-point registers `f0' -- `f15', to
85 match the assembly language.
89 * config/i386/tm-cygwin.h: Define HAVE_SSE_REGS if
90 HAVE_CONTEXT_EXTENDED_REGISTERS is defined.
91 * win32-nat.c: Define CONTEXT_DEBUGGER_DR that will also include
92 extended registers if HAVE_SSE_REGS is defined.
93 (mappings array): Add offset of extended registers.
94 (thread_rec): Use new CONTEXT_DEBUGGER_DR macro.
99 * event-loop.c (start_event_loop): Call
100 after_char_processing_hook.
101 * event-top.h (after_char_processing_hook): Declare.
102 * event-top.c (rl_callback_read_char_wrapper): Call
103 after_char_processing_hook.
104 (after_char_processing_hook): New global.
105 * top.c (operate_saved_history): New global.
106 (gdb_rl_operate_and_get_next): New function.
107 (init_main): Add the operate-and-get-next defun.
108 (gdb_rl_operate_and_get_next_completion): New function.
112 * NEWS: Update for --args.
113 * infcmd.c (construct_inferior_arguments): Moved from ...
114 * fork-child.c: ... here.
118 * symtab.c (find_pc_sect_line): Revert change of 2001-11-13; add
119 comment explaining that hand-written assembly code can have line
120 number info but no debug info for an enclosing function.
124 * sparc-nat.c (fetch_inferior_registers): Don't rely
125 on CORE_ADDR being 32-bit.
126 (store_inferior_registers): Likewise.
130 * config/djgpp/config.sed: Fix an error in etc/ at "make install"
131 time on non-LFN systems where standards*.inf* expands to nothing.
133 * go32-nat.c (save_npx): Avoid a warning from GCC 3.x.
138 * win32-nat.c (struct so_stuff): Add objfile *objfile field needed to
139 be able to remove the DLL when unloaded. Remove unused last field.
140 (handle_unload_dll): New function to handle unloading of DLL.
141 (solib_symbols_add): Change return type to struct objfile *.
142 (get_child_debug_event): Call handle_unload_dll function.
146 * win32-nat.c (_initialize_check_for_gdb_ini): New function.
147 * config/i386/xm-cygwin.h: Remove obsolete handling of __CYGWIN32__.
148 (GDBINIT_FILENAME): Remove.
152 Add x86 OpenBSD native configuration.
153 * config/i386/obsd.mt, config/i386/tm-obsd.h, config/i386/obsd.mh,
154 config/i386/nm-obsd.h: New files.
155 * configure.host (i[3456]86-*-openbsd*): New host.
156 * configure.tgt (i[3456]86-*-openbsd*): New target.
161 * GDB 5.1 was released.
165 Fix for PR gdb/209, PR gdb/156:
166 * gdbarch.c, gdbarch.h: Rebuilt.
167 * gdbarch.sh: Added `construct_inferior_arguments'.
168 * cli/cli-decode.h (cmd_list_element): Added pre_show_hook.
170 * cli/cli-setshow.c (do_setshow_command): Call the pre_show_hook.
171 * infcmd.c (_initialize_infcmd): Set sfunc on `set args' command.
172 (inferior_argc, inferior_argv): New globals.
173 (notice_args_set): New function.
174 (set_inferior_args): Clear inferior_argc and inferior_argv.
175 (set_inferior_args_vector): New function.
176 (get_inferior_args): Handle inferior argument vector.
177 (run_command): Use get_inferior_args().
178 (notice_args_read): New function.
179 (_initialize_infcmd): Don't call set_inferior_args.
180 * command.h: Typo fix.
181 (cmd_list_element): Added pre_show_hook.
182 * main.c (captured_main): Added --args option.
183 (print_gdb_help): Document --args.
184 * inferior.h (construct_inferior_arguments): Declare.
185 (set_inferior_args_vector): Likewise.
186 * fork-child.c (construct_inferior_arguments): New function.
190 * lin-lwp.c (lin_lwp_attach_lwp): Make sure SIGCHLD is in set of
193 * lin-lwp.c (lin_lwp_attach_lwp): Mark main thread as stopped.
197 * target.h (TARGET_RANGE_PROFITABLE_FOR_HW_WATCHPOINT): Delete
198 default definition; this is never used.
202 * varobj.c (c_value_of_child): Release memory for "name" when
204 (c_type_of_child): Likewise.
205 (cplus_value_of_child): Isolate the use of name_of_child to
206 one case that needs it.
207 Release memory for "name" when finished using it.
211 * top.c (gdb_init): Call init_ui_hook before initializing
216 * config/powerpc/nm-linux.h (ppc_register_u_addr): Add extern
221 * ppc-linux-nat.c (COPY_REG): Use regcache_collect instead of
222 accessing registers[].
223 (fill_fpregset): Ditto.
227 * infptrace.c (fetch_register): Dynamically allocate buffer for
229 (store_register): Use regcache_collect, instead of accessing the
230 register buffer directly.
234 * mips-tdep.c (find_proc_desc): Add cur_frame argument. Pass
235 cur_frame to heuristic_proc_desc.
236 (heuristic_proc_desc): Add cur_frame argument. Do not read SP
238 (after_prologue): Pass cur_frame == 0 to find_proc_desc.
239 (mips_frame_chain): Pass cur_frame == 1 to find_proc_desc.
240 (mips_init_extra_frame_info): Likewise.
244 * defs.h (return_to_top_level): Comment.
248 * remote.c (remote_open_1, remote_async_open_1): Use ISO C string
249 concatenation for error parameter.
250 (remote_cisco_open): Ditto.
254 * varobj.c (c_value_of_child): Use the wrapper function,
255 gdb_value_struct_elt.
256 (cplus_value_of_child): Likewise.
260 * i386-tdep.c (i386_gdbarch_init): Initialize num_regs.
261 * config/i386/tm-i386.h (NUM_REGS): Delete.
265 * i386-linux-nat.c (fill_gregset): Fix botched regcache_collect()
266 conversion for I386_LINUX_ORIG_EAX_REGNUM.
270 * config/i386/embed.mt (TM_FILE): Set to tm-i386.h.
271 * config/i386/tm-embed.h: Delete.
275 * Makefile.in (distclean): Explicitly delete Makefile et.al. in
276 gdbserver sub directory.
280 * README: Mention need for alloca(). Mention problems with
281 alpha-dec-osf4.0e. Clarify that comments refer to GDB 5.1.
285 * i386-linux-nat.c (fill_gregset): Use regcache_collect() instead
286 of accessing registers[] directly.
290 * i386-linux-nat.c (fill_gregset): Don't invoke read_register_gen()
291 when fetching ORIG_EAX.
295 * arm-linux-nat.c: Don't include <asm/ptrace.h>.
296 (fetch_register): Use elf_gregset_t instead of struct pt_regs.
297 (fetch_regs): Likewise.
298 (store_register): Likewise.
299 (store_regs): Likewise.
303 * sparc-linux-nat.c (fill_gregset): Replace read_register_gen
304 with regcache_collect.
305 (fill_fpregset): Likewise.
309 * Makefile.in: Add mips-linux-nat.c, mips-linux-tdep.c,
310 and sparc-linux-nat.c to ALLDEPFILES. Add dependencies.
311 * config/sparc/linux.mh: Add sparc-linux-nat.o to NATDEPFILES.
312 * sparc-linux-nat.c: New file, from Mark Kettenis.
316 * dwarf2read.c (dwarf_str_buffer): New.
317 (struct dwarf2_pinfo): Add dwarf_str_buffer and dwarf_str_size.
318 (DWARF_STR_BUFFER, DWARF_STR_SIZE): Define.
319 (dwarf2_has_info): Clear dwarf_str_offset.
320 (dwarf2_build_psymtabs): Read .debug_str section if present.
321 (dwarf2_build_psymtabs_hard): Save DWARF_STR_BUFFER and
323 (psymtab_to_symtab_1): Restore DWARF_STR_BUFFER and DWARF_STR_SIZE.
324 (read_attribute): Handle DW_FORM_strp.
325 (read_n_bytes, read_string): Remove HOST_CHAR_BIT != 8
327 (read_indirect_string): New.
328 (dump_die): Handle DW_FORM_strp.
332 * s390-tdep.c: Tweak argument-passing to match GCC bugs.
333 (is_float_singleton, is_struct_like, is_float_like): New
334 functions, that isolate the weirdness.
335 (is_double_or_float, is_simple_arg, pass_by_copy_ref,
336 is_double_arg): Use is_struct_like and is_float_like, rather than
337 testing the type codes ourselves.
338 (s390_push_arguments): When passing args on the stack, align each
339 on to a four-byte boundary, regardless of what the type itself
344 * Makefile.in (os9kread.o): Replace $< with autoconf-approved
351 * MAINTAINERS (write-after-approval): Add self.
355 * s390-tdep.c (is_simple_arg): Structs and unions exactly eight
356 bytes long should be handled as DOUBLE_ARGs; don't recognize them
361 * remote.c (struct packet_reg): Declare.
362 (struct remote_state): Add fields sizeof_g_packet and g_packet.
363 (init_remote_state): Initialize sizeof_g_packet and g_packet.
364 (free_remote_state): Free g_packet.
365 (packet_reg_from_pnum, packet_reg_by_regnum): New functions.
366 (remote_wait): Use above instead of gdbarch methods
367 REGISTER_RAW_SIZE and REGISTER_BYTES.
368 (remote_async_wait): Ditto.
369 (remote_fetch_registers, remote_store_registers): Ditto.
370 (store_register_using_P): Ditto.
374 * remote.c (_initialize_remote): Don't multi-arch swap tty_input.
379 * utils.c (phex_nz): For default case, set str to phex_nz return
385 * TODO (register_buffer): Delete.
386 * regcache.c (register_buffer): Make static.
387 (regcache_collect): New function.
388 * regcache.h (register_buffer): Delete declaration.
389 (regcache_collect): Declare.
390 * remote.c (store_register_using_P): Rewrite using
392 (remote_store_registers): Ditto.
393 * go32-nat.c (store_register): Ditto.
397 * remote.c (struct remote_state): Declare.
398 (get_remote_state): New function.
399 (init_remote_state): New function.
400 (remote_gdbarch_data_handle): New global.
401 (build_remote_packet_sizes): Delete function, moved to
403 (register_remote_packet_sizes): Delete function.
404 (actual_register_packet_size, remote_packet_size): Moved to
405 ``struct remote_state''.
406 (PBUFSIZE): Delete. Replaced by rs->remote_packet_size.
407 (free_remote_state): New function.
408 (get_memory_packet_size, get_memory_read_packet_size)
409 (set_thread, remote_unpack_thread_info_response)
410 (remote_get_threadinfo, parse_threadlist_response)
411 (remote_get_threadlist, remote_current_thread)
412 (remote_threads_info, remote_threads_extra_info)
413 (extended_remote_restart, get_offsets)
414 (get_offsets, remote_check_symbols, remote_open_1)
415 (remote_async_open_1, remote_detach, remote_async_detach)
416 (remote_resume, remote_async_resume, remote_wait)
417 (remote_async_wait, remote_fetch_registers)
418 (store_register_using_P, remote_store_registers)
419 (check_binary_download, putpkt_binary)
420 (remote_insert_breakpoint, remote_remove_breakpoint)
421 (remote_insert_watchpoint, remote_remove_watchpoint)
422 (remote_insert_hw_breakpoint, remote_remove_hw_breakpoint)
423 (compare_sections_command, remote_query)
424 (remote_rcmd, remote_rcmd, packet_command)
425 (remote_info_process): Update.
429 * remote.c: Include "gdb_assert.h".
430 (tty_input): Wire buffer to 400 bytes.
431 (readsocket): Check tty_input doesn't overflow.
432 (build_remote_gdbarch_data, _initialize_remote): Don't multi-arch
437 * d10v-tdep.c (d10v_pointer_to_address): Use new type flag
438 TYPE_FLAG_CODE_SPACE to recognize a pointer that has been cast
439 into the instruction address space.
440 * Makefile.in (doublest.o): Add dependency on gdbtypes.h.
443 Add address space identifiers to expression language for types.
444 * c-exp.y (space_identifier, cv_with_space_id,
445 const_or_volatile_or_space_identifier_noopt,
446 const_or_volatile_or_space_identifier): New terminals.
447 (ptype): Accept const_or_volatile_or_space_identifier.
448 (typebase): Accept const_or_volatile_or_space_identifier.
449 * c-typeprint.c (c_type_print_cv_qualifier): Rename to
450 c_type_print_modifier. Handle address space modified types.
451 * gdbtypes.h (TYPE_FLAG_CODE_SPACE, TYPE_FLAG_DATA_SPACE):
453 (struct type): Add new field as_type for addr-space qualified types.
454 (TYPE_AS_TYPE): New macro, retrieves the chain of types that are
455 identical to this one except for address-space qualification.
456 * gdbtypes.c (alloc_type): Initialize new field 'as_type'.
457 (address_space_name_to_int): New function.
458 (address_space_int_to_name): New function.
459 (make_type_with_address_space): New function.
460 (make_cv_type): Handle as_type field of new struct type object.
461 * parse.c (check_type_stack_depth): New function.
462 (push_type_address_space): New function.
463 (follow_types): Handle types with address-space qualifier.
464 * parser-defs.h (enum type_pieces): Add enum tp_space_identifier.
468 * s390-tdep.c (s390_pop_frame_regular): On the S/390, the frame
469 pointer and the SP are often the same, so we can't pop the frame
470 by setting the SP to the FP; we need to get the old SP from
473 * s390-tdep.c (s390_extract_return_value): Returned `float' values
474 can simply be copied bitwise from the registers into the value
477 * s390-tdep.c (s390_get_frame_info): Initialize SP's element of
478 the frame's saved_regs array correctly.
480 * symfile.c (simple_read_overlay_table): Make sure we can find
481 both `_novlys' and `_ovly_table' before we try anything else;
482 print a helpful error message.
483 (simple_overlay_update): No need to print error message here.
487 * Makefile.in (doublest.o): Add dependency on gdbtypes.h.
491 * arm-tdep.c (arm_register_type): New function.
492 (arm_register_convertible): Delete.
493 (arm_register_convert_to_virtual): Delete.
494 (arm_register_convert_to_raw): Delete.
495 * config/arm/tm-arm.h (REGISTER_CONVERTIBLE): Delete.
496 (REGISTER_CONVERT_TO_VIRTUAL): Delete.
497 (REGISTER_CONVERT_TO_RAW): Delete.
498 (REGISTER_VIRTUAL_TYPE): Redefine as call to arm_register_type.
499 (arm_register_type): Declare.
504 * gdbtypes.h (builtin_type_int128, builtin_type_uint128): Declare.
505 * gdbtypes.c (_initialize_gdbtypes, build_gdbtypes): Initialize
510 * s390-tdep.c: Rewrite inferior function call code. This may
511 break zSeries support; that should be fixed soon.
512 #include "gdb_assert.h".
513 (is_integer_like, is_pointer_like, is_simple_arg,
514 pass_by_copy_ref, extend_simple_arg, is_double_arg, round_up,
515 round_down, alignment_of): New functions.
516 (s390_push_arguments): Rewritten to handle passing large arguments
517 by value, and to make more readable.
519 * s390-tdep.c (s390_pop_frame): Call generic_pop_current_frame, to
520 interact correctly with generic dummy frames.
521 (s390_pop_frame_regular): Move the guts of the frame-popping code
522 to here, to be called by generic_pop_current_frame. Use the
523 frame's saved_regs array; this works for `return' as well as
524 inferior function calls.
526 * s390-tdep.c (s390_gdbarch_init): Register the function
527 `standard_coerce_float_to_double', since GCC for the S/390 follows
528 the standard rules for passing floats.
530 * valops.c (default_coerce_float_to_double,
531 standard_coerce_float_to_double): Doc fixes.
533 Patch from Peter Schauer:
535 * symtab.c (find_pc_sect_line): If we can't find the function
536 containing PC, we certainly won't have line number information for
537 that location, so return zero immediately.
541 * config/i960/tm-nindy960.h (REGISTER_CONVERTIBLE)
542 (REGISTER_CONVERT_TO_RAW, REGISTER_CONVERT_TO_VIRTUAL): Delete
544 * i960-tdep.c (i960_register_type): New function.
545 * config/i960/tm-i960.h (REGISTER_CONVERTIBLE): Delete.
546 (REGISTER_CONVERT_TO_VIRTUAL): Delete.
547 (REGISTER_CONVERT_TO_RAW): Delete.
548 (REGISTER_VIRTUAL_TYPE): Update. Call i960_register_type.
552 * m88k-tdep.c (m88k_register_type): New function.
553 * config/m88k/tm-m88k.h (REGISTER_CONVERTIBLE): Delete.
554 (REGISTER_CONVERT_TO_VIRTUAL): Delete.
555 (REGISTER_CONVERT_TO_RAW): Delete.
556 (m88k_register_type): Declare.
557 (REGISTER_VIRTUAL_TYPE): Update. Call m88k_register_type.
561 * i386-tdep.h (FPU_REG_RAW_SIZE): Define unconditionally.
562 * i387-nat.c, i387-tdep.c: Unconditionally include "i386-tdep.h".
563 * config/i386/tm-i386.h (FPU_REG_RAW_SIZE): Removed.
564 (SIZEOF_FPU_REGS): Don't use FPU_REG_RAW_SIZE here.
569 * eval.c (evaluate_subexp_standard): Fix memory leak: use alloca
574 * corefile.c (write_memory_unsigned_integer,
575 write_memory_signed_integer): New functions.
576 (write_memory): Move to be with other write_memory_* functions.
577 * gdbcore.h (write_memory_unsigned_integer,
578 write_memory_signed_integer): New declarations.
582 * dwarf2read.c (dwarf_decode_lines): Properly deal with
583 unknown standard opcodes.
587 * README (alpha-dec-osf5.1): Mention -DUSE_LDR_ROUTINES.
588 (sparcv9-sun-solars2.8): Mention problem with 64 bit GCC 3.0.x.
589 (i586-sco-sysv5uw7.1.1): Mention problem with threads.
594 * breakpoint.c (breakpoint_re_set_one): Don't discard SHLIB
595 breakpoints when they fail.
599 * printcmd.c, valprint.c, language.c, linespec.c, infcmd.c,
600 gnu-nat.c, findvar.c, expprint.c, typeprint.c, stack.c, top.c:
601 Replace value_ptr with struct value.
605 * c-valprint.c, ch-lang.c, ch-valprint.c, cp-valprint.c,
606 p-valprint.c, scm-exp.c, scm-lang.c, scm-valprint.c: Replace
607 value_ptr with struct value.
611 * eval.c: Replace most occurances of value_ptr with struct value.
615 * s390-tdep.c: Don't use a call dummy.
616 (s390_fix_call_dummy, s390_pc_in_call_dummy): Delete.
617 (s390_push_return_address): Put the address of the inferior call
620 - Provide trivial definition of s390_call_dummy_words; register it
621 with the gdbarch appropriately.
622 - Delete S390x_call_dummy_words.
623 - Gather inferior-call-related settings into a group.
624 - Use generic dummy frames.
625 - Put the inferior call breakpoint at the entry point.
626 - Use generic gdbarch methods: pc_in_call_dummy_at_entry_point,
627 generic_push_dummy_frame, generic_fix_call_dummy.
628 - There is a call dummy breakpoint offset; it's zero.
630 * s390-tdep.c: (s390_push_arguments): Write a back chain pointer
631 into the dummy frame, to help us get backtraces.
633 * values.c (value_as_address): If VAL is a function or method,
634 just return its address; don't let COERCE_ARRAY convert its
635 address to a pointer, and then have unpack_long convert it back to
640 * p-lang.c (is_pascal_string_type): New function to determine if a
641 type is a string type.
642 * p-lang.h: Add prototype for is_pascal_string_type.
643 * p-valprint.c (pascal_val_print) : Use is_pascal_string_type function
644 to display strings nicely.
648 * p-exp.y (yylex): Only change case of expression if symbol is found.
649 Also check for GPC standard name form.
653 * gdb_indent.sh: New file.
657 * s390-tdep.c (s390_get_frame_info): Initialize got_load_addr and
658 got_load_len, to placate compiler.
662 * i386-tdep.c (i386_gdbarch_init): Fix typo.
666 * s390-tdep.c (s390_gdbarch_init): Use func_frame_chain_valid, not
667 file_frame_chain_valid.
669 * s390-tdep.c (s390_get_frame_info): If the prologue loads r12
670 from the constant pool, but doesn't add in the constant pool's
671 address to it, then this function probably isn't using r12 as a
672 GOT pointer, and that load probably wasn't part of the prologue.
674 * s390-tdep.c (s390_gdbarch_init): Use the default
675 prepare_to_proceed function established by config/nm-linux.h;
676 don't try to set it to linuxthreads_prepare_to_proceed.
680 * i386-tdep.c: Include "i386-tdep.h".
682 (i386_gdbarch_init): New function.
683 (_initialize_i386_tdep): Register bfd_arch_i386.
684 * config/i386/tm-i386.h (GDB_MULTI_ARCH): Define as
685 GDB_MULTI_ARCH_PARTIAL.
686 * i386-tdep.h: When partially multi-arch, conditionally define
691 * i386-tdep.c (set_disassembly_flavor): Delete function.
692 (set_disassembly_flavor_sfunc): Delete function.
696 * dbxread.c (set_namestring): New function, replacing the
697 SET_NAMESTRING macro.
698 (SET_NAMESTRING, CUR_SYMBOL_TYPE, CUR_SYMBOL_VALUE,
699 CUR_SYMBOL_STRX, DBXREAD_ONLY, START_PSYMTAB, END_PSYMTAB): Delete
701 (read_dbx_symtab): Don't include partial-stab.h any more. Don't
702 reuse code in partial-stab.h, include the code directly, instead.
704 * Makefile.in (dbxread.o): Remove dependency on partial-stab.h.
705 (HFILES_NO_SRCDIR): Remove partial-stab.h.
707 * partial-stab.h: Remove file.
711 * gdbarch.sh: For multi-arch functions, check there is a
712 predefault and use it as the static default.
713 * gdbarch.c: Re-generate.
717 * config/i386/tm-linux.h (I386_LINUX_ORIG_EAX_REGNUM): Define in
718 terms of NUM_GREGS, NUM_FREGS and NUM_SSE_REGS instead of
719 hardcoding the register number.
723 * gdbarch.sh (USE_STRUCT_CONVENTION): Default to
724 generic_use_struct_convention.
725 * gdbarch.h, gdbarch.c: Regenerate.
726 * values.c (USE_STRUCT_CONVENTION): Delete definition, moved to
731 * gdbarch.sh (PC_IN_CALL_DUMMY): Require a value.
732 * gdbarch.c: Regenerate.
736 * complaints.c (info_verbose): Remove unneeded decl, is in defs.h.
738 * dwarf2read.c: Ditto.
739 * dwarfread.c: Ditto.
743 * mdebugread.c: Ditto.
747 * tracepoint.c: Ditto.
751 * MAINTAINERS: Update Andrew Cagney's responsibilities. Mention
752 David Taylor and Nick Duffek in past maintainers.
756 * mdebugread.c (CUR_SYMBOL_TYPE, CUR_SYMBOL_VALUE, START_PSYMTAB,
757 END_PSYMTAB, SET_NAMESTRING, HANDLE_RBRAC): Delete definitions.
758 (parse_partial_symbols): Don't include partial-stab.h any
759 more. Don't reuse code in partial-stab.h, include the code
760 directly, instead. Simplify code from partial-stab.h eliminating
761 ifdef DBXREAD_ONLY code.
763 * Makefile.in (mdebugread.o): Remove dependency on partial-stab.h.
767 * s390-nat.c: #include "regcache.h", to get declaration for
768 `supply_register'. (The last change already added the dependency
769 of s390-nat.o on regcache.h. Oops.)
771 * Makefile.in (ALLDEPFILES): Add s390-tdep.c and s390-nat.c.
772 (s390-tdep.o, s390-nat.o): New rules.
774 * s390-nat.c (s390_register_u_addr): Pass proper arguments to
779 * gdbarch.sh (CALL_DUMMY_LOCATION): Require a value.
780 * gdbarch.c: Regenerate.
784 * blockframe.c (get_prev_frame): Replace #ifdef
785 INIT_EXTRA_FRAME_INFO with run-time test.
789 * gdbarch.sh (push_return_address): Change to a function with
791 * gdbarch.h, gdbarch.c: Re-generate.
792 * valops.c (hand_function_call): Replace #ifdef
793 PUSH_RETURN_ADDRESS with run-time test of PUSH_RETURN_ADDRESS_P.
797 * arch-utils.c (generic_in_function_epilogue_p): New function.
798 * arch-utils.h (generic_in_function_epilogue_p): Declare extern.
799 * breakpoint.c (watchpoint_check): Add test whether the pc is
800 currently in the epilogue of a function.
801 * gdbarch.c: Autogenerated from gdbarch.sh.
803 * gdbarch.sh (function_list): Add `in_function_epilogue_p' definition.
807 * config/s390/s390.mh (NATDEPFILES): Don't split this across
808 several lines with backslashes; the `sed' command in
809 configure.in's AC_OUTPUT clause that comments out the NATDEPFILES
810 assignment doesn't handle lines extended with backslashes.
812 * configure.in (AC_OUTPUT): Handle assignments to NATDEPFILES
813 using `+=' as well as `='.
814 * configure: Regenerated.
818 * gdbarch.sh (init_extra_frame_info): Change to a function with
820 * gdbarch.h, gdbarch.c: Re-generate.
821 * blockframe.c (create_new_frame): Replace #ifdef
822 INIT_EXTRA_FRAME_INFO with run-time test of
823 INIT_EXTRA_FRAME_INFO_P.
827 * gdbarch.sh (verify_gdbarch): Use a mem_file to accumulate all
828 error messages. Print in a single batch.
829 * gdbarch.c: Re-generate.
833 * i386-linux-nat.c (GETREGS_SUPPLIES, supply_gregset,
834 fill_gregset): Add support for "orig_eax" register.
836 Add support for "orig_eax" pseudo register on Linux/x86.
837 * i386-linux-tdep.c: Include "inferior.h".
838 (i386_linux_register_name, i386_linux_register_byte,
839 i386_linux_register_raw_size): New functions.
840 (i386_linux_write_pc): New function.
841 * config/i386/tm-linux.h (I386_LINUX_ORIG_EAX_REGNUM): New define.
842 (NUM_REGS, MAX_NUM_REGS, REGISTER_BYTES, REGISTER_NAME,
843 REGISTER_BYTE, REGISTER_RAW_SIZE): Define to deal with additional
845 (i386_linux_register_name, i386_linux_register_byte,
846 i386_linux_register_raw_size): New prototypes.
847 (TARGET_WRITE_PC): New define.
848 (i386_linux_write_pc): New prototype.
850 * i386-tdep.c (i386_register_offset): Renamed from
851 i386_register_byte. Made static.
852 (i386_register_size): Renamed from i386_register_raw_size. Made
854 (i386_register_virtual_size): Removed.
855 (i386_register_byte, i386_register_raw_size,
856 i386_register_virtual_size): New functions.
857 (_initialize_i386_tdep): Initialize i386_register_offset instead
858 of i386_register_byte. Remove code to initialize
859 i386_register_virtual_size.
860 * config/i386/tm-i386.h (REGISTER_BYTE): Redefine to use
861 i386_register_byte function.
862 (REGISTER_RAW_SIZE): Redefine to use i386_register_raw_size
864 (REGISTER_VIRTUAL_SIZE): Redefine to use
865 i386_register_virtual_size function.
866 (i386_register_byte, i386_register_raw_size,
867 i386_register_virtual_size): New functions.
869 * Makefile.in (ALLDEPFILES): Add i387-nat.c.
870 (i387-nat.o): Add dependencies.
874 * README: Mention problem with alpha-dec-osf5.1.
878 * utils.c (internal_verror): Restore calls to abort().
883 * MAINTAINERS: Update my entry.
887 * symtab.c (operator_chars): Allow '*' and '[' to be quoted in
888 operator names, to avoid regexp expansion.
889 (search_symbols): Alloca buffer is too small, may get clobbered.
893 * coff-solib.c (coff_solib_add): Add new readsyms arg.
894 * irix5-nat.c (solib_add): Ditto.
895 * osfsolib.c (solib_add): Ditto.
896 * pa64solib.c (pa64_solib_add): Ditto.
897 * pa64solib.c (add_to_solist): Ditto.
898 * pa64solib.c (read_dld_descriptor): Ditto.
899 * solib.c (solib_add): Ditto.
900 * somsolib.c (som_solib_add): Ditto.
901 * win32-nat.c (child_solib_add): Ditto.
902 * xcoffsolib.c (solib_add): Ditto.
904 * coff-solib.h (coff_solib_add): Add new readsyms arg to prototype.
905 * pa64solib.c (add_to_solist): Ditto.
906 * pa64solib.c (read_dld_descriptor): Ditto.
907 * pa64solib.h (pa64_solib_add): Ditto.
908 * solib.h (solib_add): Ditto.
909 * somsolib.h (som_solib_add): Ditto.
910 * config/i386/tm-cygwin.h (child_solib_add): Ditto.
912 * coff-solib.c (coff_solib_add): If readsyms is zero don't read
913 symbols but do any other needed work for shared libs.
914 * irix5-nat.c: Ditto.
915 * osfsolib.c (solib_add): Ditto.
916 * solib.c (solib_add): Ditto.
917 * win32-nat.c (child_solib_add): Ditto.
918 * xcoffsolib.c (solib_add): Ditto.
920 * irix5-nat.c (sharedlibrary_command): Pass 1 as readsyms to
921 solib_add to force reading of shared library symbols.
922 * osfsolib.c (sharedlibrary_command;): Ditto.
923 * pa64solib.c (pa64_solib_sharedlibrary_command): Ditto.
924 * solib.c (sharedlibrary_command): Ditto.
925 * somsolib.c (som_solib_sharedlibrary_command): Ditto.
926 * xcoffsolib.c (sharedlibrary_command): Ditto.
928 * coff-solib.c (coff_solib_create_inferior_hook): Call solib_add
929 unconditionally with auto_solib_add.
930 * irix5-nat.c (solib_create_inferior_hook): Ditto.
931 * osfsolib.c (solib_create_inferior_hook): Ditto.
932 * solib.c (solib_create_inferior_hook): Ditto.
933 * solib-osf.c (osf_solib_create_inferior_hook): Ditto.
934 * solib-svr4.c (enable_break): Ditto.
935 * solib-sunos.c (sunos_solib_create_inferior_hook): Ditto.
937 * corelow.c (solib_add_stub): Add auto_solib_add to args passed
939 * sol-thread.c (sol_thread_attach): Ditto.
940 * config/rs6000/nm-rs6000.h (SOLIB_ADD): Ditto.
942 * infcmd.c (attach_command): Remove auto_solib_add decl.
943 Call SOLIB_ADD directly with auto_solib_add.
944 * infrun.c (handle_inferior_event): Ditto.
946 * coff-solib.h (SOLIB_ADD): Add readsyms arg.
947 * pa64solib.h (SOLIB_ADD): Ditto.
948 * solib.h (SOLIB_ADD): Ditto.
949 * somsolib.h (SOLIB_ADD): Ditto.
950 * config/i386/tm-cygwin.h (SOLIB_ADD): Ditto.
952 * fork-child.c (clone_and_follow_inferior): Remove unused
955 * pa64solib.c (pa64_solib_add): Call add_to_solist with readsyms.
956 (read_dld_descriptor): Ditto.
957 (pa64_solib_add): Call read_dld_descriptor with readsyms.
958 (pa64_solib_in_dynamic_linker): Ditto.
960 * corelow.c (symfile.h): Need this for auto_solib_add declaration.
961 * sol-thread.c (symfile.h): Ditto.
965 * s390-nat.c (s390_remove_watchpoint): Use xfree.
966 (s390_insert_watchpoint): Use xmalloc.
970 * varobj.c: Replace value_ptr with ``struct value *''.
974 * varobj.c: Re-indent.
978 * x86-64-tdep.c (value_push, x86_64_push_arguments): Replace
979 ``value_ptr'' with ``struct value *''.
980 * s390-tdep.c (s390_push_arguments): Ditto.
984 * ppc-tdep.h: Add #ifndef wrapper. Replace value_ptr with
986 (struct frame_info, struct value): Add opaque declarations.
990 * arch-utils.c (generic_in_solib_call_trampoline): New function.
991 * arch-utils.h (generic_in_solib_call_trampoline): Extern declaration.
992 * gdbarch.c: Regenerated from gdbarch.sh.
994 * gdbarch.sh (function_list): Add `IN_SOLIB_CALL_TRAMPOLINE' definition.
995 * infrun.c (IN_SOLIB_CALL_TRAMPOLINE): Remove macro.
1000 * s390-tdep.c: (s390_gdbarch_init): Don't initialize
1001 find_solib_trampoline_target.
1005 * remote-vx.c (net_wait): Fix typo from PIDGET change.
1009 * config/i386/tm-i386.h (REGISTER_NAMES): Remove.
1010 (REGISTER_NAME): New define.
1011 (i386_register_name): New prototype.
1012 * i386-tdep.c (i386_register_names): New variable.
1013 (i386_register_name): New function.
1014 * config/i386/tm-i386os9k.h, config/i386/tm-ptx.h,
1015 config/i386/tm-symmetry.h: Undefine REGISTER_NAME instead of
1020 * win32-nat.c (register_loaded_dll): Attempt to ensure that the case of
1021 the loaded DLL matches the on-disk case since the debugging API does
1022 not seem to ensure this. Calculate max name length here.
1023 (handle_load_dll): Move max name length calculation to
1024 register_loaded_dll.
1028 * arm-linux-nat.c: Include <asm/ptrace.h> explicitly.
1032 * wrapper.h (gdb_value_struct_elt): New function.
1033 * wrapper.c (gdb_value_struct_elt): Ditto.
1034 (do_captured_value_struct_elt): Ditto.
1038 * README, NEWS: Update for 5.1.
1042 * configure.in (WERROR_CFLAGS): Use AC_TRY_COMPILE to test the
1044 * configure: Re-generate.
1048 * somsolib.c (som_solib_add): A megabyte is 1024*1024 bytes.
1049 * pa64solib.c (add_to_solist): Ditto.
1050 * win32-nat.c (_initialize_inftarg): Remove unnecessary
1051 initialization of auto_solib_add, it defaults to 1.
1055 * symfile.c (auto_solib_add): Update comment to note that
1056 this variable is now just used as a boolean to control shlib
1057 autoloading, and clarify when it is used.
1058 * symfile.h (auto_solib_add): Ditto.
1060 * symfile.c (auto_solib_limit): New variable that holds the
1061 autoloading threshold instead of overloading auto_solib_add.
1062 * symfile.h (auto_solib_limit): Ditto.
1064 * irix5-nat.c (_initialize_solib): Change auto-solib-add
1065 variable from var_zinteger to var_boolean and update help.
1066 * osfsolib.c (_initialize_solib): Ditto.
1067 * pa64solib.c (_initialize_pa64_solib): Ditto.
1068 * solib.c (_initialize_solib): Ditto.
1069 * somsolib.c (_initialize_som_solib): Ditto.
1070 * xcoffsolib.c (_initialize_solib): Ditto.
1072 * pa64solib.c (pa64_solib_total_st_size): Update comment to
1073 note that the new auto_solib_limit variable is used instead
1074 of overloading auto_solib_add variable.
1075 (_initialize_pa64_solib): Ditto.
1076 * somsolib.c (som_solib_total_st_size): Ditto.
1077 (_initialize_som_solib): Ditto.
1079 * pa64solib.c (_initialize_pa64_solib): Add new set/show
1080 commands for auto-solib-limit variable.
1081 * somsolib.c (_initialize_som_solib): Ditto
1083 * pa64solib.c (add_to_solist): Check that auto_solib_add is
1084 set and use auto_solib_limit as the threshold size instead
1086 * somsolib.c (som_solib_add): Ditto, and also change warning
1087 text about size threshold exceeded.
1091 * config/i386/tm-i386v.h: Don't include "regcache.h".
1092 (EXTRACT_RETURN_VALUE, STORE_RETURN_VALUE, FRAME_CHAIN,
1093 FRAMELESS_FUNCTION_INVOCATION, FRAME_SAVED_PC, FRAME_NUM_ARGS):
1094 Remove macros. The versions from "tm-i386.h" should work fine
1095 (and in most cases even better).
1099 * i386-tdep.c (i386_extract_return_value): Use
1100 convert_typed_floating to extract floating-point value from
1102 (i386_store_return_value): Use convert_typed_floating to store
1103 floating-point return balue in register buffer
1104 (i386_register_virtual_type): Change type of floating-point
1105 registers to builtin_type_i387_ext.
1106 (i386_register_convert_to_virtual): Use convert_typed_floating to
1108 (i386_register_convert_to_raw): Likewise.
1112 * doublest.h (convert_typed_floating): New prototype.
1113 * doublest.c (convert_typed_floating): New function.
1117 * doublest.c: Improve comments a bit.
1118 (floatformat_from_length): New function.
1119 (NAN): Define to 0.0 if not already defined.
1120 (extract_floating): Rewrite to use floatformat_from_length. Warn
1121 instead of error if LEN doesn't match a known floating-point type,
1122 and return NaN (or 0.0 if NaN isn't available) in that case.
1123 (store_floating): Likewise, but zero out the target byte-stream if
1124 LEN doesn't match a known floating-point type.
1125 (extract_typed_floating): Reformat a bit.
1126 (store_typed_floating): Reformat a bit. Add comment about zeroing
1127 out padding in the target buffer.
1128 * doublest.h (extract_floating, store_floating): Fix comment about
1129 deprecation of these functions. Add parameter names to prototypes.
1133 * i387-tdep.c (print_i387_value): Use extract_typed_floating to
1134 convert RAW to a DOUBLEST instead of extract_floating.
1136 * gdbtypes.c (_initialize_gdbtypes): Set floating-point type for
1137 builtin_type_i387_ext to floatformat_i387_ext.
1141 * arm-linux-nat.c (fill_gregset): Do not check register_valid[].
1142 (fill_fpregset): Likewise.
1146 * cris-tdep.c (constraint): Loop through the whole cris_spec_regs
1147 struct, not just the NUM_SPECREGS first entries.
1148 (bdap_prefix): Read PC before autoincrement.
1152 * win32-nat.c (DebugSetProcessKillOnExit): New static function
1153 pointer to Windows' DebugSetProcessKillOnExit() function.
1154 (DebugActiveProcessStop): Ditto for DebugActiveProcessStop().
1155 (has_detach_ability): New function.
1156 (child_attach): If system has detach ability, enable it.
1157 (child_detach): If system has detach ability, actually
1158 detach from process.
1159 Change tty output to Linux format.
1163 Isolate STABS readers' use of the `textlow' and `texthigh' fields
1164 of `struct partial_symtab' to only a few locations. This change
1165 is not supposed to affect the way the values are computed, only
1168 * dbxread.c (struct symloc): Add `textlow' and `texthigh' fields
1169 to the reader-specific structure.
1170 * mdebugread.c (struct symloc): Same.
1171 * dbxread.c (TEXTLOW, TEXTHIGH): New accessor macros.
1172 * mdebugread.c (TEXTLOW, TEXTHIGH): Same.
1173 * dbxread.c (dbx_symfile_read): After we've built all our partial
1174 symbol tables, set each partial symtab's `textlow' and `texthigh'
1175 fields from our reader-specific structure.
1176 * mdebugread.c (mdebug_build_psymtabs): Same.
1177 * dbxread.c (start_psymtab): Initialize the reader-specific
1178 structure's `textlow' and `texthigh' from the new psymtab's.
1179 * mdebugread.c (parse_partial_symbols, new_psymtab): Same.
1180 * dbxread.c (read_dbx_symtab, end_psymtab, read_ofile_symtab): Use
1181 the reader-specific `textlow' and `texthigh', not the generic
1183 * mdebugread.c (parse_lines, parse_partial_symbols,
1184 psymtab_to_symtab_1): Same.
1185 * partial-stab.h: Same.
1189 * hp-psymtab-read.c, hppah-nat.c, hppa-tdep.c: Fix -Wformat
1194 * somsolib.c (som_solib_add): Use core_addr_to_host_pointer.
1195 (som_solib_desire_dynamic_linker_symbols): Compare integers with
1197 * hp-psymtab-read.c (hpread_call_pxdb): Make parameter constant.
1201 * top.c (print_gdb_version): Do not print ``(MI_OUT)''. MI
1202 interface is always enabled.
1206 * Makefile.in: Replace top.h with $(top_h). Replace expression.h
1207 with $(expression_h). Replace command.h with $(command_h).
1208 (language_h): Define. Replace language.h with $(language_h).
1209 Replace call-cmds.h with $(call_cmds_h). Replace varobj.h with
1211 (wrapper_h, valprint_h, objfiles_h, complaints_h): Ditto.
1212 (serial_h, hpread_h, buildsym_h, stabsread_h): Ditto.
1213 (xcoffsolib_h, gdb_stabs_h, linespec_h): Ditto.
1214 (bcache_h, gdb_events_h, monitor_h): Ditto.
1215 (ser_unix_h, source_h): Ditto.
1216 (varobj_h): Update list.
1218 * call-cmds.h: Add CALL_CMDS_H macro wrapper.
1219 * solist.h: Add SOLIST_H macro wrapper.
1220 * monitor.h: Add MONITOR_H macro wrapper.
1221 * typeprint.h: Add TYPEPRINT_H macro wrapper.
1222 * xcoffsolib.h: Add XCOFFSOLIB_H macro wrapper.
1223 * valprint.h: Add VALPRINT_H macro wrapper.
1224 * top.h: Add TOP_H macro wrapper.
1228 * config/a29k/tm-vx29k.h, i386-tdep.c: Include "value.h".
1229 * arm-tdep.c, exec.c, ia64-tdep.c, infrun.c: Ditto.
1230 * ppc-linux-tdep.c, remote-es.c, remote.c: Ditto.
1231 * rs6000-tdep.c, s390-tdep.c, x86-64-tdep.c: Ditto.
1232 * Makefile.in (arm-tdep.o, exec.o, i386-tdep.o, ia64-tdep.o)
1233 (infrun.o, ppc-linux-tdep.o, remote.o, rs6000-tdep.o)
1234 (x86-64-tdep.o): Update dependencies.
1235 * gdbarch.sh [!GDB_MULTI_ARCH]: Include "value.h".
1236 * gdbarch.h, gdbarch.c: Re-generate.
1240 * infptrace.c (child_xfer_memory): Fix a few coding standards
1245 * config/djgpp/README: Fix a typo and tweak for GDB 5.1.
1249 * jv-lang.h: Add #ifndef JV_LANG_H wrapper.
1250 (struct value): Add opaque declaration. Replace value_ptr with
1252 * jv-valprint.c, jv-lang.c: Replace value_ptr with equivalent
1255 * wrapper.h (struct value): Add opaque declaration. Replace
1256 value_ptr with ``struct value *''.
1257 * wrapper.c: Replace value_ptr with ``struct value *''.
1258 * breakpoint.h, breakpoint.c: Ditto.
1259 * cp-abi.h, hpacc-abi.c, gnu-v2-abi.c, cp-abi.c: Ditto.
1263 * alpha-nat.c: Include <alpha/coreregs.h> instead of
1265 (fetch_osf_core_registers): Define core_reg_mapping in a way that
1266 works on OSF5 as well as previous OSF versions.
1270 * win32-nat.c (handle_load_dll): Avoid strlwr'ing loaded DLLs or cygwin
1271 may not be able to read them in certain situations.
1275 * config/powerpc/nbsd.mt (SIM_OBS, SIM): Define.
1276 * config/powerpc/linux.mt (SIM, SIM_OBS): Ditto
1280 * README: Mention problems with HP/UX.
1286 * utils.c (core_addr_to_string): New function for conversion of
1287 CORE_ADDR to string.
1288 (string_to_core_addr): New function to convert from string to
1290 * defs.h: Added extern statements for the above.
1294 * symtab.c (lookup_block_symbol): Break out of linear search
1295 if we're past the range of possible matches.
1299 * win32-nat.c (safe_symbol_file_add_stub): Improve logic for avoiding
1300 load of already loaded DLL.
1301 (register_loaded_dll): Convert loaded DLL name to "posix" format or it
1302 will confuse subsequent opening of the filename due to dos paths.
1303 (dll_symbol_command): Pass from_tty parameter to safe_symbol_file_add.
1307 * symtab.c (lookup_block_symbol): Update comment.
1311 * value.h (value_as_address): Rename value_as_pointer.
1312 * eval.c, findvar.c, gnu-v2-abi.c, gnu-v3-abi.c, jv-lang.c,
1313 jv-valprint.c, printcmd.c, stack.c, top.c, valarith.c, valops.c,
1318 * valarith.c (value_sub): Don't pass a raw type to
1319 value_from_pointer, it has to go through check_typedef first.
1323 * gdbarch.sh (fallbackdefault): Set to one when predefault is
1325 * gdbarch.h: Regenerate.
1329 * mips-tdep.c (mips_integer_to_address): New function.
1330 (mips_gdbarch_init): Initialize pointer_to_address,
1331 address_to_pointer and integer_to_address.
1333 * config/mips/tm-mips.h (POINTER_TO_ADDRESS): Delete
1334 (ADDRESS_TO_POINTER): Delete.
1336 * d10v-tdep.c (d10v_integer_to_address): New function.
1337 (d10v_gdbarch_init): Initialize integer_to_address.
1339 * values.c (value_as_pointer): Use INTEGER_TO_ADDRESS when
1342 * gdbarch.sh (INTEGER_TO_ADDRESS): New predicate and function.
1343 * gdbarch.h, gdbarch.c: Regenerate.
1347 * config/s390/nm-linux.h: Don't include <signal.h>.
1348 (lin_lwp_attach_lwp, ATTACH_LWP, lin_thread_get_thread_signals,
1349 GET_THREAD_SIGNAL): Remove.
1351 * config/nm-linux.h (struct objfile): Remove forward declaration.
1352 (linuxthreads_new_objfile): Remove prototype.
1353 (linuxthreads_pid_to_str): Remove prototype.
1354 (PREPARE_TO_PROCEED): Redefine in terms of
1355 lin_lwp_prepare_to_proceed.
1356 (struct target_waitstatus): Forward declaration.
1357 (child_wait): New prototype.
1358 (CHILD_WAIT): Define.
1359 (lin_lwp_attach_lwp, ATTACH_LWP, lin_thread_get_thread_signals,
1360 GET_THREAD_SIGNAL): Moved here from arch-specific files.
1361 * config/alpha/nm-linux.h, config/arm/nm-linux.h,
1362 config/ia64/nm-linux.h, config/mips/nm-linux.h,
1363 config/powerpc/nm-linux.h: Don't include <signal.h>.
1364 (lin_lwp_attach_lwp, ATTACH_LWP, lin_thread_get_thread_signals,
1365 GET_THREAD_SIGNAL): Remove.
1366 * config/i386/nm-linux.h: Likewise.
1367 (struct target_waitstatus, child_wait, CHILD_WAIT): Remove.
1368 * config/m68k/linux.mh, config/sparc/linux.mh (NATDEPFILES):
1369 Remove linux-thread.o. Add proc-service.o, thread-db.o and
1371 (LOADLIBES): New variable.
1373 * sparc-nat.c (fetch_core_registers): Remove redundant prototype.
1375 * proc-service.c (BUILD_LWP): Redefine in terms of ptid_build.
1377 Fix attaching to cloned processes. This fixes PR gdb/61.
1378 * lin-lwp.c (struct lwp_info): Add new member `cloned'.
1379 (is_cloned) Removed.
1380 (lin_lwp_attach_lwp): Don't call stop_wait_callback. Instead call
1381 waitpid explicitly. Mark the LWP as cloned if waitpid fails and
1382 retry with __WCLONE flag.
1383 (lin_lwp_attach): Likewise. Warn if attaching to a cloned process.
1384 (detach_callback): Replace use of is_cloned with explicit check on
1385 LWP id and process id.
1386 (stop_wait_callback): Replace use of is_cloned with check if LWP
1387 is marked as cloned.
1388 [CHILD_WAIT] (child_wait): New function.
1389 (lin_lwp_wait): Replace use of is_cloned with check if LWP is
1390 marked as cloned. Mark newly detected LWPs as cloned if detected
1391 by waitpid with __WCLONE flag.
1392 (kill_wait_callback): Replace use of is_cloned with check if LWP
1393 is marked as cloned.
1394 * config/i386/nm-linux.h (struct target_waitstatus): Add forward
1396 (child_wait): Add prototype.
1397 (CHILD_WAIT): Define.
1401 S/390 31 & 64 bit target and GNU/Linux native support.
1403 * s390-nat.c, s390-tdep.c: New file.
1404 * config/s390/nm-linux.h, config/s390/s390.mh: New file.
1405 * config/s390/s390.mt, config/s390/s390x.mt: New file.
1406 * config/s390/tm-linux.h, config/s390/tm-s390.h: New file.
1407 * config/s390/xm-linux.h: New file.
1409 * MAINTAINERS: Update.
1414 * gdbarch.sh: Fixed CALL_DUMMY_BREAKPOINT_OFFSET to check
1415 CALL_DUMMY_BREAKPOINT_OFFSET_P.
1416 * gdbarch.c: Regenerate.
1420 * thread-db.c: Fix a few formatting mistakes.
1424 * win32-nat.c (safe_symbol_file_add_stub): Properly initialize linked
1425 list pointer to beginning rather than one beyond beginning.
1429 * symtab.h (struct block): (ALL_BLOCK_SYMBOLS): New macro.
1431 * symtab.c (find_pc_sect_symtab): Use ALL_BLOCK_SYMBOLS.
1432 (make_symbol_completion_list): Likewise.
1433 (make_symbol_overload_list): Likewise.
1434 * buildsym.c (finish_block): Likewise.
1435 * breakpoint.c (get_catch_sals): Likewise.
1436 * mdebugread.c (mylookup_symbol): Likewise.
1437 * objfiles.c (objfile_relocate): Likewise.
1438 * printcmd.c (print_frame_args): Likewise.
1439 * stack.c (print_block_frame_locals): Likewise.
1440 (print_block_frame_labels): Likewise.
1441 (print_frame_arg_vars): Likewise.
1442 * symmisc.c (dump_symtab): Likewise.
1443 * tracepoint.c (add_local_symbols): Likewise.
1444 (scope_info): Likewise.
1448 * minsyms.c (msymbol_hash): Use better hash function.
1449 (msymbol_hash_iw): Likewise. Terminate loop at '(' properly.
1451 * objfiles.h: Increase MINIMAL_SYMBOL_HASH_SIZE to match modern
1456 * printcmd.c (print_frame_args): Move symbol iteration explicitly
1457 inside the func != NULL block.
1461 * MAINTAINERS (Misc): Add Ian Roxborough as tcl/, tk/ and itcl/
1466 * config/i386/tm-cygwin.h: Include tm-i386.h instead of tm-i386v.h.
1467 This fixes errors in "long long" handling for 'finish' and 'return'
1472 * win32-nat.c (safe_symbol_file_add_stub): Avoid adding a shared
1473 library if it has already been loaded.
1474 (safe_symbol_file_add_cleanup): Don't mess with stderr or we won't see
1476 (safe_symbol_file_add): Ditto.
1477 (solib_symbols_add): Make static. Accept 'from_tty' parameter. Pass
1478 it to safe_symbol_file_add.
1479 (core_dll_symbols_add): Accomodate extra solib_symbols_add parameter.
1480 (child_solib_add): Ditto.
1482 * win32-nat.c (handle_exception): Don't print "first chance"
1484 (get_child_debug_event): Continue from exceptions if !handle_exception.
1488 * symtab.c (lookup_symtab): Removed.
1489 (lookup_symtab_1): Renamed to lookup_symtab.
1493 * win32-nat.c (get_child_debug_event): Close file handles created after
1494 process creation and DLL load.
1495 (child_create_inferior): Close unneeded process/thread handle after
1500 * mn10300-tdep.c (mn10300_analyze_prologue): Doc fixes.
1504 * varobj.c (cplus_value_of_child): Deal with a failure
1505 to dereference a pointer object.
1509 * hpux-thread.c: rewrite find_active_thread() and find_tcb()
1510 to use ptid_t, instead of overloading the thread and the pid
1511 into the same 32-bit value. Make associated necessary adaptations.
1512 Also remove unused variable cached_active_thread.
1516 * MAINTAINERS (powerpc, SCO/Unixware, Solaris/x86): Remove my
1521 * config/alpha/tm-fbsd.h (FRAME_CHAIN_VALID): Define.
1525 * main.c (enable_external_editor): Don't declare.
1526 (captured_main): Don't set enable_external_editor.
1530 * Makefile.in (ALLDEPFILES): Add solib-svr4.c and solib-sunos.c
1532 (solib-sunos.o): Add dependencies.
1533 (solib-svr4.o): Revise dependencies.
1534 * solib-svr4.c: Remove SunOS shared library support.
1535 * solib-sunos.c: New file, created from solib-svr4.c, which still
1536 contains SunOS shared library support, but no SVR4 support.
1538 * config/i386/nbsd.mh (NATDEPFILES): Remove solib-svr4.o and
1539 solib-legacy.o from this list. Add solib-sunos.o.
1540 * config/i386/sun386.mt (TDEPFILES): Likewise.
1541 * config/m68k/nbsd.mh (NATDEPFILES): Likewise.
1542 * config/m68k/sun2os4.mt (TDEPFILES): Likewise.
1543 * config/m68k/sun3os4.mt (TDEPFILES): Likewise.
1544 * config/ns32k/nbsd.mh (NATDEPFILES): Likewise.
1545 * config/sparc/nbsd.mh (NATDEPFILES): Likewise.
1546 * config/sparc/sun4os4.mt (TDEPFILES): Likewise.
1550 * Makefile.in (mipsread.o): Remove old dependency on partial-stab.h.
1554 * xcoffread.c (N_UNDF, N_ABS, N_TEXT, N_DATA, N_BSS, N_COMM, N_FN,
1555 N_EXT, N_INDR, N_SETA, N_SETT, N_SETD, N_SETB, N_SETV,
1556 CUR_SYMBOL_TYPE, CUR_SYMBOL_VALUE, START_PSYMTAB, END_PSYMTAB,
1557 SET_NAMESTRING): Delete definitions.
1558 Don't include language.h any more.
1559 Don't include partial-stab.h any more.
1560 (scan_xcoff_symtab): Don't jump through hoops to reuse code in
1561 partial-stab.h, include the code directly, instead.
1563 * Makefile.in (xcoffread.o): Remove dependency on partial-stab.h.
1567 * infcmd.c (do_registers_info): Delete code dumping large
1568 registers. Handled by val_print.
1572 * gdbarch.sh (gdbarch_alloc): Name the new architecture
1573 ``current_gdbarch'' so that it, and not the identically named
1574 global is refered to by macros.
1575 * gdbarch.c: Regenerate.
1579 * cli/cli-decode.c (add_set_boolean_cmd): Define.
1580 * cli/cli-decode.h (add_set_boolean_cmd): Declare.
1581 * command.h (add_set_boolean_cmd): Ditto.
1582 * remote.c (_initialize_remote): Use add_set_boolean_cmd for "set
1587 * gdbarch.sh (gdbarch_dump): Sort output.
1588 * gdbarch.c: Regenerate.
1592 * rs6000-tdep.c (rs6000_gdbarch_init): Don't use the previous
1593 architecture to infer the wordsize. Previous architecture may not
1598 * infttrace.c (kill_inferior): Issue a TT_PROC_EXIT request rather
1599 than a TT_PROC_STOP request to kill the inferior and its child
1600 processes. Otherwise, the inferior is not killed on HPUX 11.0.
1601 Removed the code that detaches the child processes since we just
1606 * serial.c (serial_set_cmdlist, serial_show_cmdlist): New
1608 (serial_set_cmd, serial_show_cmd): New functions.
1609 (_initialize_serial): Add "set/show serial" command.
1613 * CONTRIBUTE: Update.
1617 * solib-svr4.h (set_solib_svr4_fetch_link_map_offsets): Add
1618 argument ``gdbarch''.
1619 * solib-svr4.c (SVR4_FETCH_LINK_MAP_OFFSETS): Change default value.
1620 (default_svr4_fetch_link_map_offsets): Rename to
1621 legacy_fetch_link_map_offsets().
1622 (svr4_fetch_link_map_offsets): New function.
1623 (fetch_link_map_offsets, fetch_link_map_offsets_init): Deleted.
1624 (fetch_link_map_offsets_gdbarch_data): New static global.
1625 (set_solib_svr4_fetch_link_map_offsets): Add argument ``gdbarch''.
1626 Revise to invoke set_gdbarch_data().
1627 (init_fetch_link_map_offsets): Change return type and add an
1628 argument so that it may be used as a gdbarch_data initializer.
1629 (_initialize_svr4_solib): Eliminate use of gdbarch swap mechanism.
1630 Use gdbarch data mechanism instead.
1634 * x86-64-linux-tdep.c (LINUX_SIGINFO_SIZE): Add.
1635 (x86_64_linux_sigcontext_addr): Replace `sizeof (struct siginfo)'
1636 by LINUX_SIGINFO_SIZE.
1640 * maint.c (maintenance_set_cmdlist, maintenance_show_cmdlist): New
1642 (maintenance_set_profile_cmd): New function.
1643 (maintenance_show_cmd, maintenance_set_cmd): New functions.
1644 (_initialize_maint_cmds): Add "maintenance set" and "maintenance
1645 show" and, commented out, "maintenance set/show profile" commands.
1649 * findvar.c (read_var_value): For LOC_INDIRECT and LOC_REF_ARG
1650 convert the pointer into a CORE_ADDRs.
1654 * doublest.h (store_floating, extract_floating): Add comment
1655 indicating these functions are deprecated.
1656 (extract_typed_floating, store_typed_floating): Declare.
1657 * doublest.c: Include "gdbtypes.h".
1658 (extract_typed_floating, store_typed_floating): Define.
1660 * stabsread.c (define_symbol): Use store_typed_floating.
1661 * valarith.c (value_binop): Ditto.
1662 * values.c (unpack_long): Use extract_typed_floating.
1663 (unpack_double): Ditto.
1667 * cris-tdep.c (reg_mode_add_sub_cmp_and_or_move_op): Fetch operand1
1668 from correct register.
1672 * x86-64-linux-tdep.c (STRUCT_OFFSET): Removed.
1676 * config/i386/x86-64linux.mh: New file.
1677 * config/i386/x86-64linux.mt: New file.
1678 * config/i386/nm-x86_64.h: New file.
1679 * x86-64-linux-tdep.c: New file.
1680 * x86-64-linux-nat.c: New file.
1681 * x86-64-tdep.c: New file.
1682 * x86-64-tdep.h: New file.
1683 * i386-tdep.h: New file.
1684 * i387-nat.c: Include i386-tdep.h when multiarch.
1685 * i387-tdep.c: Ditto.
1686 * config/djgpp/fnchange.lst: Add entries for x86_64-linux-tdep.c
1687 and x86_64-linux-nat.c
1688 * Makefile.in: Add x86_64-linux-tdep.o, x86_64-tdep.o,
1689 x86_64-linux-tdep.o, x86_64-nat.o, update dependencies.
1693 * MAINTAINERS: Add myself to the write-after-approval list.
1694 * i386-nat.c (TARGET_HAS_DR_LEN_8, DR_LEN_8): Declare.
1695 (i386_length_and_rw_bits, i386_handle_nonaligned_watchpoint,
1696 i386_insert_watchpoint, i386_remove_watchpoint): Add support for
1697 8-byte wide watchpoints.
1698 (i386_show_dr): Debug message format string change.
1702 * c-exp.y (typebase): Accept (signed long long) as a type expr.
1706 better parsing of const and volatile type expressions.
1707 * c-exp.y (const_and_volatile, const_or_volatile_noopt,
1708 const_or_volatile): New non-terminals.
1709 (ptype): Use new rule for const_or_volatile.
1710 (typebase): Use new rule for const_or_volatile_noopt.
1711 * parser-defs.h (enum type_pieces): New values tp_const, tp_volatile.
1712 * parse.c (follow_types): Handle tp_const and tp_volatile on the
1713 type stack: call make_cv_type to create new const/volatile type.
1717 * solib-svr4.c (fetch_link_map_offsets): Add comment.
1718 (fetch_link_map_offsets_init): New static global.
1719 (set_solib_svr4_fetch_link_map_offsets, init_fetch_link_map_offsets):
1720 Revise implementation to use ``fetch_link_map_offsets_init''
1721 instead of ``fetch_link_map_offsets''.
1725 * coffread.c: Replace all occurrences of bfd_read with bfd_bread.
1726 * dbxread.c: Likewise.
1727 * dwarf2read.c: Likewise.
1728 * dwarfread.c: Likewise.
1729 * somread.c: Likewise.
1730 * ultra3-nat.c: Likewise.
1731 * xcoffread.c: Likewise.
1735 * cris-tdep.c (cris_get_signed_offset): Change return type to an
1736 explicitly signed char.
1738 * config/mcore/tm-mcore.h (mcore_virtual_frame_pointer): Update
1739 function signature to match recent tracepoint.c:encode_actions
1741 * mcore-tdep.c (mcore_virtual_frame_pointer): Ditto.
1745 * thread.c (do_captured_thread_select): Add uiout parameter.
1746 (do_captured_list_thread_ids): Ditto.
1747 * breakpoint.c (do_captured_breakpoint_query): Ditto.
1749 * breakpoint.c (gdb_breakpoint_query): Update. Use
1751 * thread.c (gdb_list_thread_ids): Ditto.
1752 (gdb_thread_select): Ditto.
1753 (thread_command): Pass uiout to gdb_thread_select.
1755 * gdb.h (gdb_breakpoint_query): Add parameter ui_out.
1756 (gdb_thread_select, gdb_list_thread_ids): Ditto.
1761 * solib.c (clear_solib): Call `remove_target_sections' to fix
1762 stale pointers in `struct target_ops'.
1763 * irix5-nat.c (clear_solib): Likewise.
1764 * osfsolib.c (clear_solib): Likewise.
1768 * monitor.c (monitor_load): Don't delete symtab users, or reset
1771 * monitor.c (monitor_load): Fix indentation.
1775 * printcmd.c (print_scalar_formatted): Compare the length of the
1776 value against the lengths of the target's floating-point types,
1777 not the host's. Add support for `long double'.
1779 * printcmd.c (print_scalar_formatted): Fix indentation.
1783 * rom68k-rom.c (init_rom68k_cmds): Set the flag indicating that
1784 programs running on the board can produce output.
1788 * NEWS: "ANS/ISO C" -> "ISO C".
1789 * MAINTAINERS (write-after-approval): Update my entry.
1793 * config/xm-aix4.h (MEM_FNS_DECLARED): Removed.
1795 * config/arm/xm-linux.h, config/ia64/xm-linux.h,
1796 config/m68k/xm-linux.h, config/mips/xm-linux.h,
1797 config/powerpc/xm-linux.h, config/sparc/xm-linux.h: Remove
1798 redundant inclusion of <unistd.h>.
1800 * gdbtypes.h (struct block): Add forward declaration.
1804 * defs.h (enum return_reason): Renumber so that all values are
1806 (RETURN_MASK): Negate reason.
1807 (catch_exception_ftype): Declare.
1808 (catch_exceptions): Declare.
1809 * top.c (catcher): New function, based on catch_errors. Add in
1810 parameter func_uiout and out parameters func_val, func_caught and
1811 func_cleanup. Change type of func to catch_exceptions_ftype.
1813 (struct catch_errors_args): Define.
1814 (do_catch_errors): New function.
1815 (catch_errors): Rewrite, use do_catch_errors and catcher.
1816 (catch_exceptions): New function, use catcher.
1820 Correctly parse register values provided by the monitor.
1821 * rom68k-rom.c: #include "value.h".
1822 (is_hex_digit, hex_digit_value, is_whitespace,
1823 rom68k_supply_one_register): New static functions.
1824 (rom68k_supply_register): Call rom68k_supply_one_register, instead
1825 of monitor_supply_register; the latter was incorrectly parsing
1827 * Makefile.in (rom68k-rom.o): Note that this now #includes value.h.
1831 * config/rs6000/xm-rs6000.h (setpgrp): Remove macro. GDB defaults
1832 to using setpgid if available now.
1837 * configure.in: Use ITCL_LIB_FULL_PATH and
1838 ITK_LIB_FULL_PATH to set Itcl and Itk dependancies
1840 * configure: Regenerated.
1844 * dbxread.c (process_one_symbol): Don't use error result from
1845 find_stab_function_addr().
1846 * partial-stab.h (case 'F'): Likewise.
1848 * partial-stab.h (case 'f'): Make SOFUN_ADDRESS_MAYBE_MISSING
1849 code match that used for case 'F'. This fixes the divergence
1850 that was introduced by my 1999-09-14 changes to partial-stab.h.
1854 * gdbarch.sh: Move include of dis-asm.h so it is generated earlier
1856 (TARGET_PRINT_INSN): Multiarch.
1857 * gdbarch.h: Regenerate.
1858 * gdbarch.c: Regenerate.
1860 * arch-utils.c (legacy_print_insn): New function.
1861 * arch-utils.h (legacy_print_insn): Export.
1863 * cris-tdep.c (cris_delayed_get_disassembler): Use
1864 TARGET_PRINT_INSN, instead of tm_print_insn.
1865 * d10v-tdep.c (print_insn): Ditto.
1866 * d30v-tdep.c (print_insn): Ditto.
1867 * m32r-tdep.c (dump_insn): Ditto.
1868 * v850-tdep.c (v850_scan_prologue): Ditto.
1869 * mcore-tdep.c (mcore_dump_insn): Ditto.
1870 * sh-tdep.c (sh_gdbarch_init): Set print_insn gdbarch field.
1874 * gdbtypes.h (struct type): Doc fix.
1879 * dbxread.c (free_header_files): Make global.
1880 (init_header_files): Likewise.
1881 * stabsread.h (free_header_files): Add prototype.
1882 (init_header_files): Likewise.
1883 * mdebugread.c (mdebug_build_psymtabs): Initialize
1884 properly before using the stabs debug reader.
1889 * dbxread.c (dbx_symfile_read): Only reinitialize
1890 the psymbol list if mainline or if both static
1891 and global lists are empty.
1892 * dwarf2read.c (dwarf2_build_psymtabs): Likewise.
1893 * dwarfread.c (dwarf_build_psymtabs): Likewise.
1894 * xcoffread.c (xcoff_initial_scan): Likewise.
1895 * os9kread.c (os9k_symfile_read): Likewise.
1900 * mdebugread.c (psymtab_to_symtab_1): Handle N_SO stabs without
1905 Make GDB use libiberty regex implementation.
1906 * gdb_regex.h: Normalize protection against multiple inclusion.
1907 Include "xregex.h" instead of "gnu-regex.h".
1908 * cli/cli-cmds.c: Include "gdb_regex.h" instead of "gnu-regex.h".
1909 * cli/cli-decode.c: Likewise.
1910 * Makefile.in (REGEX): Remove.
1911 (GDB_CFLAGS): Remove reference to gnu-regex.h in comment.
1912 (ADD_FILES, ADD_DEPS): Remove $(REGEX).
1914 (TAGFILES_NO_SRCDIR): Remove $(POSSLIBS).
1915 (irix5-nat.o, solib.o, solib-svr4.o, source.o, symtab.o,
1916 xcoffsolib.o, cli-decode.o, cli-cmd.o): Replace gnu-regex.h with
1917 gdb_regex.h in list of dependencies.
1918 (gnu-regex.o): Remove rule.
1919 * gnu-regex.c, gnu-regex.h: Remove files.
1923 * c-valprint.c (c_val_print): Second call to check_typedef ()
1924 is no longer necessary.
1928 * ia64-tdep.c (examine_prologue): Don't let a branch unit nop
1929 terminate the prologue scan.
1933 * symfile.c (sections_overlap): New function.
1934 (map_overlay_command): Call sections_overlap, instead of using
1935 incorrect logic to recognize overlapping sections.
1937 * symfile.c (load_command): Invalidate the overlay cache.
1941 * config/i386/xm-i386.h (HOST_BYTE_ORDER): Removed.
1946 * solib-svr4.c (enable_break): Check the inferior link map
1947 before assuming the inferior PC is at the start of the dynamic
1952 * frame.h (struct frame_info): Fix documentation on fields
1953 saved_regs, next and prev.
1957 * event-top.c (async_stop_sig) [HAVE_SIGPROCMASK]: Some
1958 gratuitious whitespace changes.
1959 [!HAVE_SIGPROCMASK]: Call sigsetmask if HAVE_SIGSETMASK is defined.
1960 * top.c: Remove redundant logic to define HAVE_SIGSETMASK.
1961 (sigsetmask) Don't define macro.
1962 (stop_sig) [HAVE_SIGPROCMASK]: Add bit of code snatched from
1963 async_stop_sig from event-top.c.
1964 [!HAVE_SIGPROCMASK]: Call sigsetmask if HAVE_SIGSETMASK is
1966 * configure.in (AC_CHECK_FUNCS): Put functions in alphabetical
1967 order. Add sigsetmask.
1968 (AC_FUNC_VFORK, AC_FUNC_ALLOCA): Reorder such that they're in
1970 * config/xm-aix4.h, config/alpha/xm-alphalinux.h,
1971 config/i386/xm-cygwin.h, config/rs6000/xm-rs6000.h
1972 (HAVE_SIGSETMASK): Remove.
1973 * aclocal.m4, config.in, configure: Regenerated.
1978 * config/powerpc/nbsd.mh (XM_FILE): Delete.
1982 * doublest.h (HOST_FLOAT_FORMAT): Delete macro.
1983 (HOST_DOUBLE_FORMAT): Delete macro.
1987 * config/xm-lynx.h, config/xm-nbsd.h, config/xm-sysv4.h,
1988 config/i386/xm-i386aix.h, config/m68k/xm-dpx2.h: Remove redundant
1989 inclusion of <limits.h>.
1993 * regcache.c (read_register_bytes): When REGISTER_NAME indicates
1994 that a register should be ignored, supply a value for the register
1995 from the raw registers[] buffer.
1999 * go32-nat.c (go32_create_inferior): Use xfree instead of free.
2000 * config/djgpp/fnchange.lst: Add entries for i386bsd-tdep.c and
2005 * gdbtypes.h (builtin_type_ieee_single_big)
2006 (builtin_type_ieee_single_little, builtin_type_ieee_double_big)
2007 (builtin_type_ieee_double_little)
2008 (builtin_type_ieee_double_littlebyte_bigword)
2009 (builtin_type_i387_ext, builtin_type_m68881_ext)
2010 (builtin_type_i960_ext, builtin_type_m88110_ext)
2011 (builtin_type_m88110_harris_ext, builtin_type_arm_ext_big)
2012 (builtin_type_arm_ext_littlebyte_bigword)
2013 (builtin_type_ia64_spill_big, builtin_type_ia64_spill_little)
2014 (builtin_type_ia64_quad_big)
2015 (builtin_type_ia64_quad_little): Declare.
2016 * gdbtypes.c (builtin_type_ieee_single_big)
2017 (builtin_type_ieee_single_little, builtin_type_ieee_double_big)
2018 (builtin_type_ieee_double_little)
2019 (builtin_type_ieee_double_littlebyte_bigword)
2020 (builtin_type_i387_ext, builtin_type_m68881_ext)
2021 (builtin_type_i960_ext, builtin_type_m88110_ext)
2022 (builtin_type_m88110_harris_ext, builtin_type_arm_ext_big)
2023 (builtin_type_arm_ext_littlebyte_bigword)
2024 (builtin_type_ia64_spill_big, builtin_type_ia64_spill_little)
2025 (builtin_type_ia64_quad_big)
2026 (builtin_type_ia64_quad_little): Define.
2027 (_initialize_gdbtypes): Initialize builtin floatformat types.
2031 * tracepoint.c (read_actions): Add FIXME for code depending on
2036 * remote-mips.c (pmon_load_fast): Add ui_load_progress_hook
2038 (mips_load_srec): Ditto.
2042 * gdbtypes.c (build_gdbtypes): Initialize TYPE_FLOATFORMAT field
2043 of builtin_type_float, builtin_type_double and
2044 builtin_type_long_double.
2045 (recursive_dump_type): Print the floatformat name.
2046 * gdbtypes.h (struct type): Add type_specific field floatformat.
2047 (TYPE_FLOATFORMAT): Define
2051 * printcmd.c (print_insn): Use the given stream for
2056 * arm-tdep.c (convert_from_extended, convert_to_extended): Delete
2057 assembler version of function.
2058 (convert_from_extended, convert_to_extended): Rewrite. Use
2059 floatformat_to_doublest, floatformat_from_doublest,
2060 floatformat_arm_ext_big, floatformat_arm_ext_littlebyte_bigword.
2061 (arm_push_arguments): Use extract_floating and store_floating to
2062 perform floating point conversions.
2063 (SWAP_TARGET_AND_HOST): Delete macro.
2064 * arm-linux-tdep.c (arm_linux_push_arguments): Use
2065 extract_floating and store_floating to perform floating point
2070 * gdbtypes.h (struct type): Clarify meaning of field ``length''.
2074 * varobj.c (varobj_update): Change first parameter to
2075 pointer to struct varobj*. This function can delete
2076 varobjs, so we need to give callers the new varobj
2078 (value_of_root): Update "var", too, if "var_handle"
2080 * varobj.h (varobj_update): Likewise.
2084 * Makefile.in (varobj_h): Define.
2085 (mi-cmd-var.o): Depends on varobj_h.
2086 (gdbtk-varobj.o): Change varobj.h to $(varobj_h).
2090 * configure.in (GDBTK_SRC_DIR): We must have autoconf
2091 give us the absolute path to the source directory.
2092 * configure: Regenerated.
2093 * Makefile.in (GDBTK_SRC_DIR): Add variable so that
2094 autoconf can substitue it in for us.
2095 (gdbtk.o): Pass in GDBTK_SRC_DIR instead of srcdir. We
2096 really do need an absolute pathname.
2100 * Makefile.in (GDBTK_VERSION): Set a version number.
2101 (GDBTK_LIBRARY): New variable to point to location where
2102 gdbtk will install its tcl library. Changed all refereneces
2103 to $(datadir)/insight1.0 to $(GDBTK_LIBRARY).
2104 (SUBDIR_GDBTK_ALL): Remove "all-gdbtk". No longer needed.
2105 (SUBDIR_GDBTK_CLEAN): Remove "clean-gdbtk". No longer needed.
2106 (all-gdbtk): Remove.
2107 (install-gdbtk): Remove.
2108 (gdbtk.o): Pass srcdir to file when compiling.
2112 * Makefile.in: Changed all references to the install directory
2113 "gdbtcl" to read "insight1.0".
2117 * arch-utils.c (generic_skip_trampoline_code): New function.
2118 * arch-utils.h (generic_skip_trampoline_code): Declare external.
2119 * gdbarch.c: Regeberated from gdbarch.sh.
2121 * gdbarch.sh (SKIP_TRAMPOLINE_CODE): Multi-arch.
2122 * infrun.c: Remove default setting of SKIP_TRAMPOLINE_CODE macro.
2127 * partial-stab.h: valu should be a CORE_ADDR.
2131 * dbxread.c (SWAP_SYMBOL): Removed.
2132 (INTERNALIZE_SYMBOL): Check sign extended vma.
2136 * top.c (SIGSETJMP): Protect env argument with parentheses.
2137 (SIGLONGJMP): Protect env argument with parentheses.
2141 * config/mn10300/mn10300.mt (TM_FILE): Delete.
2142 * configure.tgt: Add mn10300 to list of mulit-arch targets.
2143 * config/mn10300/tm-mn10300.h: Delete file. Move contents ...
2144 * mn10300-tdep.c: To here.
2148 * config/i386/tm-symmetry.h (REGISTER_CONVERT_TO_VIRTUAL): Make
2149 val a DOUBLEST. Use floatformat_to_doublest.
2150 (REGISTER_CONVERT_TO_RAW): Ditto. Use foatformat_from_doublest.
2151 * config/m88k/tm-m88k.h (REGISTER_CONVERT_TO_VIRTUAL): Ditto.
2152 (REGISTER_CONVERT_TO_RAW): Ditto.
2156 * config/mn10300/tm-mn10300.h (PC_REGNUM, SP_REGNUM): Delete.
2157 * mn10300-tdep.c (mn10300_gdbarch_init): Initialize pc_regnum and
2162 * doublest.c (convert_doublest_to_floatformat): Rename
2163 floatformat_from_doublest. Make static.
2164 (convert_floatformat_to_doublest): Rename floatformat_to_doublest.
2166 (floatformat_to_doublest): New function.
2167 (floatformat_from_doublest): New function.
2168 (host_float_format, host_double_format, host_long_double_format):
2169 New static variables.
2170 (store_floating, extract_floating): Always use
2171 floatformat_to_doublest and floatformat_from_doublest.
2172 * doublest.h (HOST_LONG_DOUBLE_FORMAT): Delete macro.
2176 * config/mn10300/tm-mn10300.h (INIT_FRAME_PC): Delete.
2177 * mn10300-tdep.c (mn10300_gdbarch_init): Initialize init_frame_pc.
2181 * target.h (TARGET_VIRTUAL_FRAME_POINTER): Delete, multi-arched.
2182 * gdbarch.sh (TARGET_VIRTUAL_FRAME_POINTER): Add.
2183 * gdbarch.h, gdbarch.c: Regenerate.
2185 * arch-utils.h (legacy_virtual_frame_pointer): Declare.
2186 * arch-utils.c: Include "gdb_assert.h".
2187 (legacy_virtual_frame_pointer): Define.
2188 * Makefile.in (arch-utils.o): Depends on gdb_assert.h.
2190 * tracepoint.c (encode_actions): Make frame_reg an int. Make
2191 frame_offset a LONGEST.
2192 * ax-gdb.c (gen_frame_args_address): Ditto.
2193 (gen_frame_locals_address): Ditto.
2194 * mn10300-tdep.c (mn10300_gdbarch_init): Initialize
2195 virtual_frame_pointer.
2196 (mn10300_virtual_frame_pointer): Make static. Update parameter
2197 list to match function signature.
2198 * config/mn10300/tm-mn10300.h (TARGET_VIRTUAL_FRAME_POINTER): Delete.
2202 * gdb-events.sh: Add architecture_changed event.
2203 * gdbarch.sh: Include gdb-event.h.
2204 (gdbarch_update_p): Notify UIs when architecture changes.
2205 * gdb-events.h: Regenerated.
2206 * gdb-events.c: Regenerated.
2207 * gdbarch.c: Regenerated.
2211 * regcache.c (legacy_write_register_gen): Don't 'optimize out'
2212 a write_register to a pseudo-reg. Target_store_pseudo_register
2213 needs to get called, because these regs may be computed and may
2218 * gdb-events.sh: Deal with event notifications with no
2223 * remote.c (read_frame): Correct off-by-one error in condition.
2227 * stabsread.c (read_type): Add support for const and volatile
2232 * core-regset.c (fetch_core_registers): Remove HAVE_GREGSET_T
2233 and HAVE_FPREGSET_T checks. Use gdb_gregset_t and gdb_fpregset_t.
2237 * defs.h (SLASH_STRING): If not defined, set
2238 to "/", regardless of _WIN32, __CYGWIN__, or
2243 * cli/cli-decode.h: Include "gdb_regex.h" instead of
2250 * config/i386/xm-go32.h: Include xm-i386.h.
2251 (HOST_BYTE_ORDER, HOST_LONG_DOUBLE_FORMAT): Remove definitions.
2255 The following changes avoid polluting global namespace with the
2256 `enable' and `disable' identifiers, because some platforms define
2257 in their system headers symbols with global scope that go by those
2260 * breakpoint.h (enum enable_state): Rename from `enum enable'.
2261 Also rename all the enum members to have the "bp_" prefix.
2262 (struct breakpoint): Rename the `enable' member to `enable_state'.
2263 (enum bpdisp): Rename all members to have the "disp_" prefix.
2265 * breakpoint.c: All users of `enum enable' and `enum bpdisp'
2267 (args_for_catchpoint_enable): Rename the `enable' member to
2268 `enable_p'. All users changed.
2270 * tracepoint.h (enum enable): Remove.
2271 (struct tracepoint): The member `enabled' is now `int enabled_p'.
2273 * tracepoint.c: All users of the `enabled' member changed.
2275 * printcmd.c (struct display): The `status' member is now an int.
2277 * memattr.h (struct mem_region): Rename the `status' member to
2279 (enum enable): Remove.
2281 * memattr.c: Change all users of the `status' member of struct
2282 mem_region to use `enabled_p' instead.
2284 * infcmd.c (run_stack_dummy): Use disp_del instead of del.
2286 * go32-nat.c: Remove the kludgey work-around for conflicts between
2287 <dos.h> and "breakpoint.h".
2291 * MAINTAINERS: Add myself to the write-after-approval list.
2292 * ser-tcp.c (tcp_open): Use `localhost' as default host if no
2297 * doublest.h (store_floating, floatformat_to_doublest): Make IN
2298 paramter a const void pointer.
2299 (floatformat_from_doublest): Make IN const, Make OUT a void
2301 * doublest.c (floatformat_to_doublest): Update.
2302 (floatformat_from_doublest): Update.
2303 (extract_floating): Update.
2307 * defs.h (HOST_FLOAT_FORMAT, HOST_DOUBLE_FORMAT)
2308 (HOST_FLOAT_FORMAT, HOST_DOUBLE_FORMAT)
2309 (HOST_LONG_DOUBLE_FORMAT, DOUBLEST)
2310 (floatformat_to_doublest, floatformat_from_doublest)
2311 (floatformat_is_negative, floatformat_is_nan)
2312 (floatformat_mantissa, store_floating)
2313 (extract_floating): Move declaration from here.
2314 * doublest.h: To here. New file.
2315 * utils.c (get_field, floatformat_to_doublest, put_field)
2316 (ldfrexp, floatformat_from_doublest, floatformat_is_negative)
2317 (floatformat_is_nan, floatformat_mantissa)
2318 (FLOATFORMAT_CHAR_BIT): Move from here.
2319 * doublest.c: To here. New file.
2320 * findvar.c (store_floating, extract_floating): Move from here.
2321 * doublest.c: To here.
2322 * Makefile.in (SFILES): Add doublest.c.
2323 (COMMON_OBS): Add doublest.o.
2324 (doublest.o): Specify dependencies.
2325 (doublest_h): Define.
2327 * config/m88k/tm-m88k.h: Include "doublest.h".
2328 * config/i960/tm-i960.h: Ditto.
2329 * config/i386/tm-symmetry.h: Ditto.
2330 * rs6000-tdep.c, valarith.c: Ditto.
2331 * valprint.c, stabsread.c, sh-tdep.c: Ditto.
2332 * ia64-tdep.c, i387-tdep.c, i386-tdep.c: Ditto.
2333 * values.c, arm-tdep.c, arm-linux-tdep.c: Ditto.
2334 * alpha-tdep.c, ax.h, expression.h: Ditto.
2335 * sh-tdep.c, parse.c, top.c, value.h: Ditto.
2337 * Makefile.in (arm-tdep.o): Add $(doublest_h).
2338 (i386-tdep.o, i387-tdep.o, ia64-tdep.o): Ditto.
2339 (rs6000-tdep.o, stabsread.o, valarith.o): Ditto.
2340 (values.o, valprint.o, arm-linux-tdep.o): Ditto.
2341 (alpha-tdep.o, ax_h, parse.o, top.o, value_h): Ditto.
2342 (parser_defs_h): Ditto.
2343 (expression_h): Add $(doublest_h) and $(symtab_h).
2347 * Makefile.in: Sort header definitions.
2348 (parser_defs_h, dis_asm_h, annotate_h, gdbthread_h): Define.
2349 Replace parser-defs.h with $(parser_defs_h). Replace $(dis-asm_h)
2350 and $(dis-asm.h) with $(dis_asm_h). Replace annotate.h with
2351 $(annotate_h). Replace target.h with $(target_h). Replace
2352 gdbthread.h with $(gdb_thread_h). Replace symfile.h with $(symfile_h).
2356 * config/i386/xm-i386.h: New file.
2357 * config/i386/xm-fbsd.h: Removed.
2358 * config/i386/xm-linux.h: Removed.
2359 * config/i386/fbsd.mh: Reorganize a bit.
2360 (XM_FILE): Set to xm-i386.h instead of xm-fbsd.h.
2361 * config/i386/linux.mh (XM_FILE): Set to xm-i386.h insread of
2366 * dwarf2read.c (dwarf2_build_psymtabs_hard): Doc fix.
2370 * configure.in: Only invoke AC_FUNC_SETPGRP if not cross-compiling.
2371 Check for SETPGRP_VOID separately if cross-compiling and ISO C
2372 headers are available.
2376 * config/i386/tm-i386sol2.h (STAB_REG_TO_REGNUM): Redefine to call
2377 i386_dwarf_reg_to_regnum.
2379 * i386-tdep.c (i386_register_convert_to_virtual): Replace
2380 assertion with a warning if we're asked to convert towards a
2381 non-floating-point type. Zero out the the buffer where the data
2382 is supposed to be stored in that case.
2386 * config/djgpp/djconfig.sh: Unset CDPATH.
2388 * go32-nat.c (get_cr3): Temporary disable support for page tables
2389 in UMBs, as it is incomplete.
2391 Support for stepping through longjmp in DJGPP programs:
2393 * config/i386/tm-go32.h (JB_ELEMENT_SIZE, JB_PC): New macros.
2394 (GET_LONGJMP_TARGET): Define to call get_longjmp_target.
2395 (get_longjmp_target): Add prototype.
2399 Fix some PID/TPID fallout for HP/UX.
2401 * infttrace.c (ptrace_wait): Match external declaration,
2402 and match target_post_wait declaration.
2406 * MAINTAINERS: Add Orjan Friberg as cris target maintainer.
2407 (cris): Set --enable-gdb-build-warnings flag to -w.
2412 * config/m68k/tm-m68k.h (TARGET_LONG_DOUBLE_FORMAT): Define.
2413 (TARGET_LONG_DOUBLE_BIT): Define.
2414 (REGISTER_VIRTUAL_SIZE): Return 12 for floating point registers.
2415 (MAX_REGISTER_VIRTUAL_SIZE): Increase to 12.
2416 (REGISTER_VIRTUAL_TYPE): Return builtin_type_long_double for
2417 floating point registers.
2418 (REGISTER_CONVERTIBLE, REGISTER_CONVERT_TO_VIRTUAL)
2419 (REGISTER_CONVERT_TO_RAW): Remove.
2420 * config/m68k/xm-linux.h (HOST_LONG_DOUBLE_FORMAT): Define.
2424 * thread.c, breakpoint.c: Include "gdb.h".
2425 * Makefile.in (gdb_h): Define.
2426 (HFILES_NO_SRCDIR): Add gdb.h.
2427 (mi-cmd-break.o, mi-main.o, thread.o)
2428 (breakpoint.o): Add dependency on $(gdb_h).
2430 * defs.h (enum gdb_rc, gdb_breakpoint_query)
2431 (gdb_breakpoint, gdb_thread_select)
2432 (gdb_list_thread_ids): Move declaration from here ...
2433 * gdb.h: To here. New file.
2437 * Makefile.in (SUBDIR_TUI_OBS): Add tui-out.o, tui-hooks.o.
2438 (SUBDIR_TUI_SRCS): Add tui-out.c tui-hooks.c
2440 (tui-out.o): Define dependencies.
2441 (tui-hooks.o): Likewise.
2445 * MAINTAINERS: Update e-mail address of active @cygnus.com
2446 maintainers to @redhat.com.
2450 * README (Known bugs): Delete section.
2451 (Kernel debugging): Delete section.
2452 (Languages other than C): Delete section.
2453 (Host/target specific installation notes) New section.
2457 * config/i386/tm-i386.h (STAB_REG_TO_REGNUM, SDB_REG_TO_REGNUM,
2458 DWARF_REG_TO_REGNUM, DWARF2_REG_TO_REGNUM): New defines.
2459 (i386_stab_reg_to_regnum, i386_dwarf_reg_to_regnum): New
2461 * config/i386/tm-fbsd.h, config/i386/tm-i386gnu.h,
2462 config/i386/tm-linux.h (STAB_REG_TO_REGNUM): Redefine to call
2463 i386_dwarf_reg_to_regnum.
2464 * i386-tdep.c (i386_stab_reg_to_regnum, i386_dwarf_reg_to_regnum):
2467 * i386-tdep.c: Include "gdb_assert.h"
2468 (i386_register_convert_to_virtual): Fix such that it can handle
2469 conversion to any floating-point type. Assert that we are dealing
2470 with a floating-point first.
2471 (i386_register_convert_to_raw): Assert that TYPE is a
2472 floating-point type with length 12.
2476 * configure.in: Added dependency of gdb on tcl/tk libraries.
2477 * Makefile.in: Likewise.
2478 * configure: Regenerated with the above using autoconf.
2482 * sh-tdep.c (sh_gdbarch_init): Use SH_DEFAULT_NUM_REGS instead of
2484 (SH_DEFAULT_NUM_REGS): Define.
2488 * go32-nat.c (read_memory_region): Make sure the segment limit was
2489 indeed set, to work around a Windows 2000 bug.
2493 * infptrace.c (child_xfer_memory): Add cast to CORE_ADDR.
2494 * infttrace.c (child_xfer_memory): Likewise.
2495 * symm-nat.c (child_xfer_memory): Likewise.
2496 * gdbserver/low-hppabsd.c (read_inferior_memory): Likewise.
2497 (write_inferior_memory): Likewise.
2498 * gdbserver/low-linux.c (read_inferior_memory): Likewise.
2499 (write_inferior_memory): Likewise.
2500 * gdbserver/low-lynx.c (read_inferior_memory): Likewise.
2501 (write_inferior_memory): Likewise.
2502 * gdbserver/low-nbsd.c (read_inferior_memory): Likewise.
2503 (write_inferior_memory): Likewise.
2504 * gdbserver/low-sparc.c (read_inferior_memory): Likewise.
2505 (write_inferior_memory): Likewise.
2506 * gdbserver/low-sun3.c (read_inferior_memory): Likewise.
2507 (write_inferior_memory): Likewise.
2511 * README: Mention how to make gdb.pdf.
2517 * MAINTAINERS (Stephen P. Smith): Added to write after approval
2522 * mips-tdep.c (mips_push_arguments): Add comment explaining
2523 problem with LE o32 GCC.
2527 * config/powerpc/aix.mh (MH_LDFLAGS): Don't set these, the Gnu linker
2528 doesn't understand them.
2532 * memattr.c (mem_info_command): Reformat output to look more like
2533 'info break' output.
2534 (_initialize_mem): Improve help.
2538 * configure.in (AC_CHECK_FUNCS): Add setpggrp.
2539 (AC_FUNC_SETPGRP): Add.
2540 * aclocal.m4, configure, config.in: Regenerated.
2541 * inflow.c (gdb_setpgid): Get rid of NEED_POSIX_SETPGID and
2542 SETPGRP_ARGS. Always use setpgid if it is available, fall back on
2543 setpgrp if it isn't. Use SETPGRP_VOID (defined by autoconf) to
2544 distinguish between the two setpgrp flavours.
2545 * config/xm-sysv4.h, config/arm/xm-linux.h,
2546 config/i386/xm-i386aix.h, config/i386/xm-sco.h,
2547 config/i386/xm-linux.h, config/i386/xm-ptx.h,
2548 config/m68k/xm-linux.h, config/powerpc/xm-linux.h,
2549 config/sparc/xm-linux.h, config/sparc/xm-sun4sol2.h,
2550 config/ia64/xm-linux.h (NEED_POSIX_SETPGID): Remove.
2551 * config/rs6000/xm-rs6000.h (SETPGRP_ARGS): Remove.
2555 * go32-nat.c (read_memory_region): Set the granularity bit of the
2556 allocated segment according to its size, and adjust the limit to
2557 be page-aligned if the segment is page-granular.
2559 * (get_cr3, get_pde, get_pte, display_ptable_entry, go32_pde)
2560 (display_page_table, go32_pte, go32_pte_for_address): New functions.
2561 (_initialize_go32_nat): Initialize and document them.
2565 * i386gnu-nat.c: Include "i387-nat.h".
2566 (struct env387): Removed.
2567 (reg_offset): Fix comment.
2568 (fetch_fpregs): Use FCTRL_REGNUM and FOP_REGNUM instead of
2569 FIRST_FPU_CONTROL_REGNUM and LAST_FPU_CONTROL_REGNUM. Rewrite to
2570 use i387_supply_fsave.
2571 (gnu_fetch_registers): Remove spurious whitespace.
2572 (convert_to_env387): Remove.
2573 (store_fpregs): Add argument regno. Use i387_fill_fsave instead
2574 of convert_to_env387.
2575 (gnu_store_registers): Remove spurious whitespace. Pass REGNO to
2577 * config/i386/i386gnu.mt (TDEPFILES): Add i387-tdep.o.
2578 * config/i386/i386gnu.mh (XDEPFILES): Remove i387-tdep.o.
2579 (NATDEPFILES): Add i387-nat.o.
2583 * Makefile.in (ALLDEPFILES): Add m68hc11-tdep.c.
2584 (m68hc11-tdep.o): Define dependencies.
2588 * m68hc11-tdep.c (m68hc11_gdbarch_init): Define int at 16-bits.
2592 * utils.c (init_page_info): Use tui_get_command_dimension.
2593 * printcmd.c (disassemble_command): Simplify tui specific code,
2594 use tui_is_window_visible, tui_show_assembly.
2598 * i386bsd-nat.c: Do not include <sys/sysctl.h>.
2599 (_initialize_i386bsd_nat) [KERN_PS_STRINGS]: Move FreeBSD-specific
2601 * i386fbsd-nat.c: ... here. New file.
2602 * config/i386/fbsd.mh (NATDEPFILES): Add i386-fbsd.o.
2603 * config/i386/nm-fbsd.h (CHILD_RESUME): Define.
2604 * Makefile.in (ALLDEPFILES): Add i386fbsd-nat.c.
2605 (i386fbsd-nat.o): Add dependencies.
2609 * signals.c: New file.
2610 * Makefile.in: Add signals.o.
2611 * target.c (struct signals, target_signal_to_name)
2612 (target_signal_from_name, target_signal_from_host)
2613 (do_target_signal_to_host, target_signal_to_host_p)
2614 (target_signal_to_host, target_signal_from_command): Move to
2616 (initialize_targets): Move check of struct signals to...
2617 * signals.c (_initialize_signals): Here.
2621 * MAINTAINERS: Add Michael Chastain as C++ testsuite maintainer.
2626 * configure.tgt (i*86-*-pe*): New target.
2631 * infttrace.c (child_thread_alive): Fix gdb_tid typo.
2632 * somsolib.c (no_shared_libraries): Provide stub.
2633 * xcoffsolib.c (no_shared_libraries): Provide stub.
2637 * Makefile.in (COMMON_OBS): Remove tui-file.o.
2638 (SUBDIR_TUI_OBS): Add it here.
2639 (SUBDIR_TUI_SRCS): Move tui-file.c and tui-file.h here.
2640 (main.o): Remove dependency with tui-file.h.
2644 * Makefile.in (tui-file.o): Update dependencies.
2648 * top.c (catch_errors): Convert PTR to void * in parameters list.
2649 (quit_cover): Ditto.
2653 * source.c (find_source_lines): Remove tui test, must be replaced
2654 by appropriate warning hook.
2655 (print_source_lines): Remove tui hacks, must be replaced by cli.
2656 (forward_search_command): Remove tui hacks, can be replaced by
2657 appropriate calls to identify_source_line when tui scrolls.
2658 (reverse_search_command): Likewise.
2662 * remote.c (init_remote_ops, init_remote_cisco_ops,
2663 init_remote_async_ops): Set to_pid_to_str and
2664 to_extra_thread_info correctly and in the same order as declared
2669 * remote.c: Revert below. Included more than intended.
2673 * remote.c (init_remote_ops, init_remote_cisco_ops,
2674 init_remote_async_ops): Set to_pid_to_str and
2675 to_extra_thread_info correctly and in the same order as declared
2680 * findvar.c (read_var_value): Apply value_as_pointer() to
2681 addresses retrieved from the target for LOC_BASEREG and
2682 LOC_BASEREG_ARG variables.
2686 * NEWS: New target CRIS.
2690 * top.c (show_commands): Remove extern decl of history_get, it's
2691 already in readline/history.h.
2695 * top.c (is_complete_command, init_cmd_lists, init_cli_cmds,
2696 execute_user_command, do_setshow_command, get_prompt, init_proc,
2697 serial_log_command): Remove extern declarations. Include
2698 cli/cli-cmds.h, cli/cli-script.h, cli/cli-setshow.h, serial.h.
2699 * gdbcmd.h (execute_user_command): Remove declaration, it's already
2700 in cli/cli-script.h.
2701 * command.h (do_setshow_command): Remove declaration, it's already
2702 in cli/cli-setshow.h.
2703 * infrun.c: Include "cli/cli-script.h" for execute_user_command.
2704 * Makefile.in (infrun.o): Update dependencies.
2706 * cli/cli-setshow.h: Add comment for do_setshow_command.
2710 * cli/cli-cmds.c (shell_escape) [GLOBAL_CURDIR]: Condition the
2711 call to chdir on this symbol rather than on __DJGPP__.
2712 (CANT_FORK) [__MSDOS__]: Move from here...
2713 * defs.h (CANT_FORK) [__MSDOS__]: ...to here.
2714 (GLOBAL_CURDIR) [__MSDOS__]: Define.
2718 * configure.tgt: Recognise the CRIS architecture.
2719 * config/cris/cris.mt: New file for CRIS target.
2720 * cris-tdep.c: New file for CRIS target.
2724 * top.c (quit_cover, float_handler): Move definition up before use.
2725 (gdb_init): Move to end of file, to avoid calls to not yet defined
2731 * serial.h (SERIAL_ASYNC): Delete.
2732 (DEPRECATED_SERIAL_FD): Delete.
2733 (SERIAL_DEBUG): Delete.
2734 (SERIAL_DEBUG_P): Delete.
2735 (SERIAL_DRAIN_OUTPUT): Delete.
2736 (SERIAL_FLUSH_OUTPUT): Delete.
2737 (SERIAL_FLUSH_INPUT): Delete.
2738 (SERIAL_SEND_BREAK): Delete.
2739 (SERIAL_RAW): Delete.
2740 (SERIAL_GET_TTY_STATE): Delete.
2741 (SERIAL_SET_TTY_STATE): Delete.
2742 (SERIAL_PRINT_TTY_STATE): Delete.
2743 (SERIAL_NOFLUSH_SET_TTY_STATE): Delete.
2744 (SERIAL_SETBAUDRATE): Delete.
2745 (SERIAL_SETSTOPBITS): Delete.
2746 (SERIAL_CAN_ASYNC_P): Delete.
2747 (SERIAL_IS_ASYNC_P): Delete.
2748 (SERIAL_UN_FDOPEN): Delete.
2749 (SERIAL_READCHAR): Delete.
2750 (SERIAL_CLOSE): Delete.
2751 (SERIAL_FDOPEN): Delete.
2752 (SERIAL_OPEN): Delete.
2753 * ser-unix.c: Update.
2754 * sparclet-rom.c: Update.
2755 * remote-bug.c: Update.
2758 * nindy-share/ttyflush.c: Update.
2759 * nindy-share/Onindy.c: Update.
2762 * remote-nindy.c: Update.
2764 * sparcl-tdep.c: Update.
2765 * sh3-rom.c: Update.
2767 * remote-utils.c: Update.
2768 * remote-st.c: Update.
2769 * remote-sds.c: Update.
2770 * remote-rdp.c: Update.
2771 * remote-os9k.c: Update.
2772 * remote-nrom.c: Update.
2773 * remote-mips.c: Update.
2774 * remote-es.c: Update.
2775 * remote-e7000.c: Update.
2776 * remote-array.c: Update.
2778 * nindy-share/nindy.c: Update.
2779 * monitor.c: Update.
2783 * mn10200-tdep.c: Replace value_ptr with ``struct value *''.
2784 * mcore-tdep.c: Ditto.
2785 * sparc-tdep.c: Ditto.
2787 * rs6000-tdep.c: Ditto.
2788 * ppc-linux-tdep.c: Ditto.
2789 * m68hc11-tdep.c: Ditto.
2790 * ia64-tdep.c: Ditto.
2791 * i386-tdep.c: Ditto.
2792 * arm-linux-tdep.c: Ditto.
2793 * hppa-tdep.c: Ditto.
2794 * h8500-tdep.c: Ditto.
2795 * fr30-tdep.c: Ditto.
2796 * arm-tdep.c: Ditto.
2797 * alpha-tdep.c: Ditto.
2798 * d30v-tdep.c: Ditto.
2799 * d10v-tdep.c: Ditto.
2800 * m32r-tdep.c: Ditto.
2801 * mips-tdep.c: Ditto.
2802 * v850-tdep.c: Ditto.
2806 * top.c (readline_line_completion_function, noop_completer): Move
2808 * completer.c (readline_line_completion_function, noop_completer):
2810 * gdbcmd.h (readline_line_completion_function, noop_completer):
2811 Move declarations from here...
2812 * completer.h (readline_line_completion_function, noop_completer):
2814 * corefile.c: Include completer.h.
2817 * Makefile.in: Update dependencies.
2821 * go32-nat.c (go32_create_inferior): Support command lines longer
2822 than 126 characters.
2826 * NEWS: New target 68HC11/68HC12.
2830 * utils.c (query): Remove tui hacks; tui must use the query_hook.
2831 * top.c (command_loop): Remove tui insert_mode hacks; don't call
2832 tuiCleanUp because this must be made with atexit by tui.
2833 * symfile.c (symbol_file_command): Remove call to TUIDO
2834 * stack.c (show_and_print_stack_frame_stub): Remove tui check;
2835 not necessary when using the selected frame hooks.
2836 (print_stack_frame_stub): Likewise.
2837 (print_frame_info_base): Likewise.
2838 (print_frame_info): Likewise.
2839 (up_silently_command): Likewise.
2840 (down_silently_command): Likewise.
2841 (show_stack_frame): Likewise for TUIDO.
2842 (select_frame): Likewise.
2843 (select_and_print_frame): Likewise.
2844 (stack_publish_stopped_with_no_frame): Remove.
2845 (select_and_maybe_print_frame): Remove.
2846 * main.c (captured_main): Remove tui_fileopen and tuiInit; tui
2847 must use the initialize ui hook.
2848 * infrun.c (normal_stop): Remove call to TUIDO; tui must use the
2849 selected frame hooks.
2850 * event-top.c (command_handler): Remove tui insert_mode hack.
2851 * defs.h: Remove TUIDO; Only include tui.h.
2852 * breakpoint.c (mention): Remove calls to TUIDO.
2853 (delete_breakpoint): Remove tui hacks; tui must install
2854 the breakpoint hooks.
2858 * config/i386/xm-linux.h (KERNEL_U_ADDR): Move from here...
2859 * config/i386/nm-linux.h: ...to here. Change comments about user
2862 * config/i386/xm-linux.h (HAVE_TERMIOS): Really remove.
2864 * Makefile.in (ALLDEPFILES): Add i386bsd-nat.c and i386bsd-tdep.c
2865 (i386bsd-tdep.o, i386bsd-nat.o): New targets.
2869 * remote-e7000.c (fetch_regs_from_dump): If register set is null,
2870 generate an internal error.
2871 (e7000_fetch_registers): Initialize variable 'wanted'.
2872 (e7000_wait): Initialize variable 'wanted_nopc'.
2873 (e7000_store_register): Fix sprintf compiler warnings.
2874 (sub2_from_pc): Ditto.
2875 (e7000_open): Close the descriptor, not the name.
2876 (e7000_load): Fix compiler warnings.
2877 (sub2_from_pc): Ditto.
2878 * Makefile.in (remote-e7000.o): Can now compile with -Werror.
2882 * i386bsd-nat.c: Include <signal.h>, <stddef.h> and
2884 (store_inferior_registers): Wrap long line.
2885 (i386bsd_dr_get_status): Fix typo in comment.
2886 (_initialize_i386bsd_nat): New function. * i386bsd-tdep.c: New
2887 file. * config/i386/tm-fbsd.h (IN_SIGTRAMP): New define.
2888 (i386bsd_in_sigtramp): New prototype.
2889 (SIGTRAMP_START, SIGTRAMP_END): Redefine in terms...
2890 (i386bsd_sigtramp_start, i386bsd_sigtramp_end): ...these new
2891 (external) variables.
2892 (SIGCONTEXT_PC_OFFSET): Removed.
2893 (FRAME_SAVED_PC): New define.
2894 (i386bsd_frame_saved_pc): New function. * config/i386/fbsd.mt
2895 (TDEPFILES): Add i386bsd-tdep.o.
2899 * mips-linux-tdep.c (_initialize_mips_linux_tdep): Use ISO C
2904 * lin-lwp.c (lin_lwp_wait): Avoid check for resumed LWPs if there
2905 are no registered LWPs yet.
2909 * config/i386/nm-linux.h (CANNOT_FETCH_REGISTER): Call the right
2911 (CANNOT_STORE_REGISTER): Likewise.
2915 * remote-rdp.c: Include "serial.h"
2919 * gdbserver/remote-utils.c (remote_open): Set VMIN to 1
2920 in HAVE_TERMIO/HAVE_TERMIOS cases.
2924 * lin-lwp.c (stop_wait_callback): Add support for flushing
2925 signals. Use that in favour of the old code to get rid of
2926 superfluous SIGINTs.
2927 (lin_lwp_wait): Use the new support in stop_wait_callback to
2928 flush all but one SIGINT.
2930 * i386-tdep.c (i386_extract_return_value): Undo 2001-07-11 changes
2932 (i386_store_return_value): Improve comments about storing
2933 floating-point return values.
2935 * config/arm/xm-linux.h, config/i386/xm-linux.h,
2936 config/m68k/xm-linux.h, config/powerpc/xm-linux.h,
2937 config/sparc/xm-linux.h, config/ia64/xm-linux.h (HAVE_TERMIOS):
2938 Removed. Taken care of by autoconf and terminal.h.
2942 * mips-tdep.c (mips_type_needs_double_align): New function.
2943 (mips_push_arguments): Align o32 structs to even argument
2944 registers if necessary.
2948 * config/djgpp/fnchange.lst: Add entries for
2949 mips-linux-nat.c and mips-linux-tdep.c.
2953 * config/powerpc/xm-linux.h: Fix corrupted file.
2955 * configure.in: Add check for sigsetjmp.
2956 * config/m68k/xm-linux.h (HAVE_SIGSETJMP): Removed.
2957 * config/xm-sysv4.h (HAVE_SIGSETJMP): Removed.
2958 * configure, config.in: Regenerated.
2962 * config/sh/tm-sh.h (struct gdbarch_tdep): Add
2963 FLOAT_ARGLAST_REGNUM, RETURN_REGNUM, ARG0_REGNUM, ARGLAST_REGNUM,
2966 * sh-tdep.c (sh_skip_prologue_hard_way): Rename from
2967 skip_prologue_hard_way().
2968 (skip_prologue_hard_way): Make it a function pointer.
2969 (sh_print_register): Use function pointer do_pseudo_register,
2970 instead of sh_do_pseudo_register.
2971 (sh_do_registers_info): Ditto.
2972 (sh_gdbarch_init): Initialize do_pseudo_register.
2973 (IS_MOV_TO_R14): Rename from IS_MOV_R14.
2974 (skip_prologue_hard_way): Update.
2975 (sh_gdbarch_init): Move setting of frame_chain,
2976 get_saved_register, init_extra_frame_info, push_arguments,
2977 extract_return_value, pop_frame, store_struct_return,
2978 extract_struct_value_address, use_struct_convention,
2979 init_extra_frame_info to before target specific settings.
2980 (sh_gdbarch_init): Initialize new tdep fields
2981 FLOAT_ARGLAST_REGNUM, RETURN_REGNUM, ARG0_REGNUM, ARGLAST_REGNUM,
2983 (sh_push_arguments): Use new gdbarch_tdep fields
2984 {ARG0,ARGLAST}_REGNUM.
2985 (sh_saved_pc_after_call, sh_nofp_frame_init_saved_regs,
2986 sh_init_extra_frame_info, sh_push_return_address,
2987 sh_generic_show_regs, sh3_show_regs, sh3e_show_regs,
2988 sh3_dsp_show_regs, sh4_show_regs, sh_dsp_show_regs): Update to use
2989 gdbarch_tdep->PR_REGNUM.
2990 (dr_reg_base_num, fv_reg_base_num): Move to earlier in the file.
2994 * config/mips/tm-linux.h: Include "tm-linux.h" instead of copying
2995 from it. Move definitions of REALTIME_LO and REALTIME_HI above
3000 * MAINTAINERS: List myself for MIPS/Linux
3005 * gdbserver/remote-utils.c (remote_open): Only
3006 check for F_SETOWN if we had F_SETFL and FASYNC.
3012 * config/m68k/linux.mh: Remove core-regset.o.
3013 * m68klinux-nat.c: Fix comment.
3014 (supply_gregset): Change argument to elf_gregset_t *.
3015 (supply_fpregset): Change argument to elf_fpregset_t *.
3016 (fetch_core_registers): New function.
3017 (linux_elf_core_fns): Define.
3018 (_initialize_m68k_linux_nat): New function.
3022 * configure.tgt: Mark d10v as pure multi-arch.
3023 * config/d10v/tm-d10v.h: Delete file.
3024 * config/d10v/d10v.mt (TM_FILE): Delete.
3028 * serial.h (typedef serial_t): Delete. Replace all references to
3029 serial_t with `struct serial *'.
3031 * nindy-share/ttyflush.c: Update.
3032 * nindy-share/ttyflush.c: Update.
3033 * nindy-share/Onindy.c: Update.
3034 * nindy-share/nindy.c: Update.
3035 * remote-rdp.c: Update.
3036 * remote-sds.c: Update.
3037 * remote-st.c: Update.
3038 * remote-nindy.c: Update.
3039 * remote-mips.c: Update.
3040 * remote-e7000.c: Update.
3041 * remote-os9k.c: Update.
3042 * remote-nrom.c: Update.
3043 * remote-es.c: Update.
3044 * remote-array.c: Update.
3046 * mon960-rom.c: Update.
3049 * ser-e7kpc.c: Update.
3050 * sparclet-rom.c: Update.
3052 * ser-tcp.c: Update.
3053 * ser-go32.c: Update.
3054 * sparcl-tdep.c: Update.
3055 * w89k-rom.c: Update.
3057 * sh3-rom.c: Update.
3059 * ser-pipe.c: Update.
3060 * ser-unix.c: Update.
3061 * ser-unix.h: Update.
3068 * gdbserver/remote-utils.c (remote_open): Set gdbserver as "owner"
3070 (input_interrupt): Don't block on read, in case we got redundant
3071 SIGIO. Don't gripe about redundant SIGIO.
3072 * gdbserver/low-hppabsd.c (mywait): Use waitpid(). Enable SIGIO
3073 handler while waiting.
3074 * gdbserver/low-linux.c (mywait): Likewise.
3075 * gdbserver/low-nbsd.c (mywait): Likewise.
3076 * gdbserver/low-sparc.c (mywait): Likewise.
3080 * infrun.c (print_stop_reason): Add missing uiout field
3081 "reason" for SIGNAL_RECEIVED case.
3085 * config/alpha/nm-linux.h (TARGET_ELF64, PSIGNAL_IN_SIGNAL_H):
3086 Remove unused macro's.
3088 * config/powerpc/nm-linux.h (NO_SYS_REG_H): Remove, it's no longer
3093 * go32-nat.c (info_dos_cmdlist): New variable.
3094 (go32_info_dos_command): New function.
3095 (_initialize_go32_nat): Convert all DOS-specific commands into
3096 subcommands of "info dos". Suggested by Andrew Cagney
3101 * config/nm-linux.h: Fix comments.
3103 * thread-db.c (enable_thread_event_reporting): Correct warning
3104 message about getting thread death breakpoint.
3107 * i386-tdep.c (i386_extract_return_value): "Fix" comment.
3108 (i386_store_return_value): Frob FPU status and tag word to make
3109 sure the return value is the only value on the FPU stack.
3111 * config/tm-linux.h: Do not include <signal.h>. Instead provide
3112 reasonable defaults for REALTIME_LO and REALTIME_HI if they're not
3114 * config/nm-linux.h: Include <signal.h>.
3115 [__SIGRTMIN] (REALTIME_LO, REALTIME_HI): Define to __SIGRTMIN and
3116 (__SIGRTMAX + 1) respectively.
3120 * mcore-rom.c: Include "serial.h".
3121 * Makefile.in (mcore-rom.o): Depends on "serial.h".
3125 * Makefile.in (remote-bug.o): Depends on serial.h.
3126 * remote-bug.c: Include "serial.h".
3127 * MAINTAINERS: Mark m88k target as buildable.
3132 Clean up the D10V port so that GDB and the target program no
3133 longer disagree on how big pointers are.
3134 * findvar.c (value_from_register): Remove special case code for D10V.
3135 * printcmd.c (print_frame_args): Same.
3136 * valops.c (value_at, value_fetch_lazy): Same.
3137 * values.c (unpack_long): Same.
3138 * gdbarch.sh: Changes to effect the following:
3139 * gdbarch.h (GDB_TARGET_IS_D10V, D10V_MAKE_DADDR,
3140 gdbarch_d10v_make_daddr_ftype, gdbarch_d10v_make_daddr,
3141 set_gdbarch_d10v_make_daddr, D10V_MAKE_IADDR,
3142 gdbarch_d10v_make_iaddr_ftype, gdbarch_d10v_make_iaddr,
3143 set_gdbarch_d10v_make_iaddr, D10V_DADDR_P,
3144 gdbarch_d10v_daddr_p_ftype, gdbarch_d10v_daddr_p,
3145 set_gdbarch_d10v_daddr_p, D10V_IADDR_P,
3146 gdbarch_d10v_iaddr_p_ftype, gdbarch_d10v_iaddr_p,
3147 set_gdbarch_d10v_iaddr_p, D10V_CONVERT_DADDR_TO_RAW,
3148 gdbarch_d10v_convert_daddr_to_raw_ftype,
3149 gdbarch_d10v_convert_daddr_to_raw,
3150 set_gdbarch_d10v_convert_daddr_to_raw, D10V_CONVERT_IADDR_TO_RAW,
3151 gdbarch_d10v_convert_iaddr_to_raw_ftype,
3152 gdbarch_d10v_convert_iaddr_to_raw,
3153 set_gdbarch_d10v_convert_iaddr_to_raw): Delete declarations.
3154 * gdbarch.c: Delete the corresponding definitions.
3155 (struct gdbarch): Delete members d10v_make_daddr,
3156 d10v_make_iaddr, d10v_daddr_p, d10v_iaddr_p,
3157 d10v_convert_daddr_to_raw, and d10v_convert_iaddr_to_raw.
3158 (startup_gdbarch): Remove initializers for the above.
3159 (verify_gdbarch, gdbarch_dump): Don't verify or dump them any
3161 * d10v-tdep.c (d10v_register_virtual_type): Rather that
3162 claiming the stack pointer and PC are 32 bits long (which they
3163 aren't), say that the stack pointer is an int16_t, and the
3164 program counter is a function pointer. This allows the rest
3165 of GDB to make the appropriate conversions between the code
3166 pointer format and real addresses.
3167 (d10v_register_convertible, d10v_register_convert_to_virtual,
3168 d10v_register_convert_to_raw): Delete function; no registers
3169 are convertible now, so we use
3170 generic_register_convertible_not instead.
3171 (d10v_address_to_pointer, d10v_pointer_to_address): New gdbarch
3173 (d10v_push_arguments, d10v_extract_return_value): Remove special
3174 cases for code and data pointers.
3175 (d10v_gdbarch_init): Set gdbarch_ptr_bit to 16, so that GDB and
3176 the target agree on how large pointers are. Say that addresses
3177 are 32 bits long. Register the address_to_pointer and
3178 pointer_to_address conversion functions. Since no registers are
3179 convertible now, register generic_register_convertible_not as the
3180 gdbarch_register_convertible method instead of
3181 d10v_register_convertible. Remove registrations for
3182 d10v_register_convert_to_virtual,
3183 d10v_register_convert_to_raw, gdbarch_d10v_make_daddr,
3184 gdbarch_d10v_make_iaddr, gdbarch_d10v_daddr_p,
3185 gdbarch_d10v_iaddr_p, gdbarch_d10v_convert_daddr_to_raw, and
3186 gdbarch_d10v_convert_iaddr_to_raw.
3188 * printcmd.c (print_scalar_formatted): If we are printing an
3189 address, remember that TARGET_ADDR_BIT is not always equal to
3192 * valops.c (value_cast): When casting a pointer to an integer,
3193 don't convert it to an address.
3197 * remote-utils.h (struct serial): Declare as opaque. Remove
3198 include of "serial.h".
3199 * Makefile.in (remote_utils_h): Update.
3201 * monitor.h (struct serial): Declare as opaque. Remove include of
3203 (struct monitor_ops): Replace serial_t with `struct serial *'.
3204 * monitor.c (monitor_desc): Ditto.
3208 * mips-linux-tdep.c: New file.
3209 * mips-linux-nat.c: New file.
3210 * config/mips/linux.mh: New file.
3211 * config/mips/linux.mt: New file.
3212 * config/mips/xm-linux.h: New file.
3213 * config/mips/nm-linux.h: New file.
3214 * config/mips/tm-linux.h: New file.
3215 * configure.host: Recognize mips*-*-linux*.
3216 * configure.tgt: Likewise.
3217 * NEWS: Mention mips*-*-linux* port.
3221 * serial.h (struct serial): Rename `struct _serial_t'.
3222 * serial.c (XMALLOC): Define.
3223 (serial_open): Update. Use XMALLOC.
3224 (serial_fdopen): Ditto.
3228 * gdbtypes.h (builtin_type_void_data_ptr): Rename
3230 * gdbtypes.c (builtin_type_void_data_ptr): Update.
3231 (build_gdbtypes): Update.
3232 (_initialize_gdbtypes): Update.
3233 * values.c (value_as_pointer): Update.
3234 * utils.c (host_pointer_to_address): Update.
3235 (address_to_host_pointer): Update.
3239 * remote-udi.c (udi_wait): Make type, instead of name, of first
3244 * ser-mac.c: Make obsolete.
3245 * Makefile.in (ser-mac.o): Ditto.
3249 * go32-nat.c (go32_get_windows_version, print_mem, go32_sysinfo)
3250 (read_memory_region, get_descriptor, display_descriptor)
3251 (go32_sldt, go32_sgdt, go32_sidt): New functions.
3252 (top-level): Include ctype.h, utsname.h, dos.h, and go32.h. Ifdef
3253 away `disable' from dos.h, since breakpoint.h defines an enum
3254 member of the same name, and GCC 2.7.2 barfs.
3255 (_initialize_go32_nat): Provide new commands dos-sysinfo, dos-ldt,
3256 dos-gdt, and dos-idt, all of them in the "info" class
3260 * procfs.c (create_procinfo): Allocate space for saved_entryset
3262 (destroy_one_procinfo): Free space allocated to saved_entryset
3267 * TODO (5.1): Update.
3271 * symtab.c (main_name): New function.
3272 (set_main_name): New function.
3273 * symtab.h: Declare.
3277 * dbxread.c (process_one_symbol): Handle the N_MAIN stab by
3279 * blockframe.c (inside_main_func): Use main_name instead of
3281 * symtab.c (find_main_psymtab): Ditto.
3282 * source.c (select_source_symtab): Ditto.
3283 * nlmread.c (nlm_symfile_read): Ditto.
3284 * rs6000-tdep.c (skip_prologue): Ditto.
3288 * TODO: Convert most items into PRs.
3292 * lin-lwp.c (status_to_str): New function.
3293 (lin_lwp_wait): Use it to print debug messages where appropriate.
3297 * i387-tdep.c (print_i387_value): Fix pointer glitch.
3301 * lin-lwp.c (count_events_callback): Fix formatting. Turn check
3302 commented with "paranoia" into gdb_assert.
3303 (select_event_lwp_callback): Likewise.
3304 (cancel_breakpoints_callback): Bail out early if LP is the event
3305 LWP. Add comment about backup up breakpoints. Fix formatting and
3307 (select_event_lwp): Make solely repsonsible for switching event
3308 LWP. Fix formatting and remove bogus "ERROR" debug message.
3309 Don't backup breakpoints from here.
3310 (lin_lwp_wait): Don't touch LP->status, let select_event_lwp
3311 handle that. Only call select_event_lwp if we're not waiting for
3312 a specific LWP, i.e. when PID == -1. Backup breakpoints from here.
3316 * procfs.c (procfs_resume): Silence noisy warning.
3320 * lin-lwp.c: Prevent thread starvation by using a monte carlo
3321 method to choose which of several event threads to handle next.
3323 (stop_wait_callback): Defer pushback of breakpoint events until
3324 later; add SIGTRAP events to the queue of unhandled events.
3325 Keep calling waitpid until SIGSTOP retrieved. If more than one
3326 non-SIGSTOP event is retrieved, push them back onto the process
3328 (count_events_callback, select_singlestep_lwp_callback,
3329 select_event_lwp_callback, cancel_breakpoints_callback,
3330 select_event_lwp): New functions. Implement monte carlo method
3331 for selecting which of several SIGTRAP threads to handle next.
3332 Push back the breakpoint event for all threads other than the
3334 (lin_lwp_wait): Call select_event_lwp to decide which of several
3335 sigtrapped lwps to handle next.
3336 (resume_callback): Disable code that attempts to handle
3337 step_resume breakpoints. Let core gdb handle this.
3341 * gdbtypes.h (builtin_type_void_func_ptr): New builtin type.
3342 * gdbtypes.c (builtin_type_void_func_ptr): Define the variable.
3343 (build_gdbtypes): Initialize it.
3344 (_initialize_gdbtypes): Swap it.
3348 * mips-tdep.c (mips32_op): Correct offset.
3349 (itype_op): Likewise.
3350 (itype_rs): Fix formatting.
3351 (itype_immediate): Fix formatting.
3352 (jtype_op): Correct offset.
3353 (jtype_target): Fix formatting.
3354 (rtype_op): Correct offset.
3355 (rtype_rs): Fix formatting.
3356 (rtype_rt): Likewise.
3357 (rtype_rd): Likewise.
3358 (rtype_shamt): Likewise.
3359 (rtype_funct): Likewise.
3361 (mips32_next_pc): Fix formatting and comments. Recognize
3362 coprocessor 1 branches. Check the correct field for BLT family
3363 branches. Use itype_rt instead of itype_rs for the second register
3364 of a BNE or BNEL branch. Move (unreachable) default case.
3368 * ui-out.h (struct ui_out_impl): Add field is_mi_like_p.
3369 (ui_out_is_mi_like_p): Declare.
3370 * ui-out.c (ui_out_is_mi_like_p): Define.
3371 (default_ui_out_impl): Initialize is_mi_like_p to zero.
3372 * cli-out.c (cli_ui_out_impl): Ditto.
3373 * breakpoint.c (print_it_typical): Use ui_out_is_mi_like_p.
3374 (watchpoint_check, print_one_breakpoint, mention): Ditto.
3375 * infrun.c (print_stop_reason, normal_stop): Ditto.
3379 * mips-tdep.c (mips_software_single_step): New function.
3380 * config/mips/tm-mips.h: Add prototype for
3381 mips_software_single_step.
3385 * ppc-linux-nat.c (supply_gregset): Use elf_greg_t instead
3387 (fill_gregset): Likewise.
3391 * objfiles.c (open_mapped_file): Use lbasename instead of
3396 * d10v-tdep.c (d10v_frame_chain, d10v_frame_init_saved_regs,
3397 show_regs, d10v_read_pc, d10v_write_pc, d10v_read_sp,
3398 d10v_write_sp, d10v_write_fp, d10v_read_fp,
3399 d10v_push_return_address): Call the functions d10v_make_daddr,
3400 d10v_make_iaddr, d10v_convert_iaddr_to_raw, and
3401 d10v_convert_daddr_to_raw, not the global macros D10V_MAKE_DADDR,
3402 D10V_MAKE_IADDR, D10V_CONVERT_IADDR_TO_RAW, and
3403 D10V_CONVERT_DADDR_TO_RAW.
3405 * dwarf2read (dwarf2_build_psymtabs_hard): Doc fix.
3409 * config/i386/xm-go32.h (HOST_I386): Removed.
3410 * config/i386/xm-linux.h (HOST_I386): Removed.
3414 * i387-tdep.c (print_i387_value): Add extra space after final full
3419 * TODO (5.1): Update. Doco changes committed.
3423 * config/arm/tm-arm.h: Include "floatformat.h".
3427 * i387-tdep.c: Include "gdb_assert.h".
3428 (print_i387_value): Use extract_floating to extract the FP value
3429 from a zero padded local buffer.
3433 * TODO: Delete all thread items. The thread code was overhauled.
3437 * memattr.c (create_mem_region): Move n to next memory region,
3438 to avoid infinite loop.
3440 * memattr.h: Add copyright statement.
3445 * dwarf2read.c (struct partial_die_info): New member: has_pc_info.
3446 (read_partial_die): Delete fourth argument; we return this info in
3447 the struct partial_die_info object itself now.
3448 (dwarf2_build_psymtabs_hard, scan_partial_symbols): Use the
3449 has_pc_info field of the partial die struct, rather than passing a
3450 variable by reference to read_partial_die.
3452 * dwarf2read.c (dwarf2_build_psymtabs_hard): Remove extraneous
3453 code in loop condition.
3457 * thread_db (find_new_threads_callback, thread_db_thread_alive,
3458 attach_thread): Update comments.
3462 * thread-db.c (attach_thread): Check for TD_THR_ZOMBIE in addition
3463 to TD_THR_UNKNOWN when looking for defunct zombie threads.
3464 (thread_db_thread_alive): Ditto.
3465 (find_new_threads_callback): Ditto.
3469 * MAINTAINERS: Add myself to the write-after-approval list.
3473 * solib-svr4.c: Include "elf/mips.h".
3474 (elf_locate_base): Make DT_MIPS_RLD_MAP block unconditional.
3478 * dwarf2read.c (read_comp_unit, sibling_die, dump_die,
3479 dump_die_list, store_in_ref_table, follow_die_ref): Make these
3480 static; they're private functions.
3484 * coffread.c (coff_symfile_read): Parse DWARF2 info if present.
3488 * TODO: Add import of readline 4.2 as a gdb 5.2 task.
3492 * config/djgpp/fnchange.lst: Sort.
3496 * config/djgpp/fnchange.lst: Rename mi0-var-block.exp,
3497 mi0-var-cmd.exp, mi0-var-child.exp and mi0-var-display.exp.
3501 * MAINTAINERS: Add myself to the write-after-approval list.
3505 * remote-array.c (SWAP_TARGET_AND_HOST): Delete macro.
3506 (get_hex_word): Don't use HOST_BYTE_ORDER.
3507 (array_fetch_registers): Add variable ``reg''. Use
3508 store_unsigned_integer to byte-swap the register. Delete unused
3513 * MAINTAINERS: Add Per Bothner to Java maintainers.
3517 * rdi-share/unixcomm.c (SERIAL_PREFIX): Always provide a default.
3518 * rdi-share/hostchan.h (__unix): Hack, provide a default value.
3519 * rdi-share/host.h (__unix): Hack, define when __NetBSD__.
3521 * MAINTAINERS: Update. arm-elf builds.
3525 * d10v-tdep.c (d10v_ts2_dmap_register): Doc fix.
3527 * d10v-tdep.c (d10v_frame_chain_valid, d10v_use_struct_convention,
3528 d10v_breakpoint_from_pc, d10v_register_byte,
3529 d10v_register_raw_size, d10v_register_virtual_size,
3530 d10v_register_virtual_type, d10v_register_convertible,
3531 d10v_register_convert_to_virtual, d10v_register_convert_to_raw,
3532 d10v_make_daddr, d10v_make_iaddr, d10v_daddr_p, d10v_iaddr_p,
3533 d10v_convert_iaddr_to_raw, d10v_convert_daddr_to_raw,
3534 d10v_store_struct_return, d10v_store_return_value,
3535 d10v_extract_struct_value_address, d10v_frame_saved_pc,
3536 d10v_saved_pc_after_call, d10v_pop_frame, d10v_skip_prologue,
3537 d10v_frame_chain, d10v_frame_init_saved_regs,
3538 d10v_init_extra_frame_info, d10v_read_pc, d10v_write_pc,
3539 d10v_read_sp, d10v_write_sp, d10v_write_fp, d10v_read_fp,
3540 d10v_push_return_address, d10v_push_arguments,
3541 d10v_extract_return_value): Make these functions static.
3545 From Fernando Nasser:
3546 * infrun.c (handle_inferior_event): Handle "nexti" inside function
3551 * infrun.c (handle_inferior_event): Replace prev_pc test in all
3552 calls to bpstat_stop_status (removed in 1999-09-24). This test
3553 helps distinguish stepping over a breakpoint trap from stepping
3554 thru a jump to the instruction after a breakpoint trap.
3555 (handle_inferior_event): Don't bother writing the PC if
3556 DECR_PC_AFTER_BREAK is zero (optimization).
3557 * breakpoint.c (bpstat_stop_status): Add comment explaining the
3558 purpose and usage of the "not_a_breakpoint" argument in computing
3559 the breakpoint address.
3564 * monitor.c (setmem_resp_delim_pattern): New regexp pattern.
3565 (setreg_resp_delim_pattern): Likewise.
3566 (setmem_resp_delim_fastmap): New buffer.
3567 (setreg_resp_delim_fastmap): Likewise.
3568 (monitor_open): Initialize above regexp if they are defined.
3569 (monitor_write_memory): Use regexp to check the result of write.
3570 (monitor_store_register): Likewise to check result of register set.
3575 * coff-solib.c: Include symfile.h and objfiles.h to make
3576 OBJF_SHARED visible.
3580 * configure.in (--enable-gdbmi): Enable by default.
3581 * configure: Regenerate.
3587 * solib-osf.c (osf_in_dynsym_resolve_code): Add a comment
3588 explaining the consequences of always returning zero. No code
3594 * defs.h (enum target_signal): Add TARGET_SIGNAL_REALTIME_65
3595 to TARGET_SIGNAL_REALTIME_127.
3596 * target.c (struct signals): Add SIG63 to SIG127.
3597 (target_signal_from_host): Handle up to 127 signals.
3598 (do_target_signal_to_host): Likewise.
3602 * remote-sds.c (sds_start_remote): Change type of ``c'' to int
3603 from possibly unsigned char.
3607 * ser-ocd.c: Delete file.
3608 * Makefile.in (ALLDEPFILES): Remove ser-ocd.c
3609 (ser-ocd.o): Delete target.
3615 * MAINTAINERS (Write After Approval): Sort.
3616 (Past Maintainers): Daniel Berlin stepped down as C++ maintainer.
3620 * breakpoint.c (breakpoint_1): Always output the breakpoint
3621 headings. Leave it to ui-out to decide which
3625 * stack.c (print_frame): For ui_out, output a list of arguments.
3629 * MAINTAINERS (paper trail): Update.
3633 * infrun.c: Eliminate the "thread_step_needed" state variable,
3634 and replace it with a relatively simple test in resume.
3635 (resume): Replace thread_step_needed logic with a test for
3636 stepping, breakpoint_here_p and breakpoints_inserted.
3637 Move CANNOT_STEP_BREAKPOINT logic to after thread_step logic.
3638 (proceed): Discard thread_step_needed logic.
3639 (wait_for_inferior, fetch_inferior_event, handle_inferior_event):
3640 Discard thread_step_needed logic.
3644 * remote-rdi.c (arm_rdi_wait): Fix return type in prototype.
3645 * rdi-share/host.h: Add missing parenthesis in conditional.
3649 * configure.in: include nlist.h when checking for member som_addr
3651 * configure: regenerate.
3655 * cli-out.c (cli_out_new): Initialize new structure member
3660 * ui-out.h (ui_out_table_header): Add parameter ``col_name''.
3661 (table_header_ftype): Ditto.
3662 * cli-out.c (cli_table_header): Update.
3663 * ui-out.c (ui_out_table_header): Update.
3664 (uo_table_header): Update.
3665 (default_table_header): Update.
3666 (append_header_to_list): Update.
3667 (struct ui_out_header): Add field ``col_name''.
3668 (append_header_to_list): Use xstrdup. Initialize col_name.
3669 * breakpoint.c (breakpoint_1): Pass COL_NAME to
3670 ui_out_table_header.
3674 * cli-out.c: Include "gdb_assert.h'.
3675 (struct ui_out_data): Add field ``suppress_output.
3676 (cli_table_begin): When NR_ROWS is zero, suppress_output.
3677 (cli_table_end): Clear suppress_output.
3678 (cli_table_body): Check suppress_output.
3679 (cli_table_header, cli_begin): Ditto.
3680 (cli_end, cli_field_int, cli_field_skip): Ditto.
3681 (cli_field_string, cli_field_fmt, cli_spaces): Ditto.
3682 (cli_text, cli_message, cli_wrap_hint): Ditto.
3683 * breakpoint.c (breakpoint_1): Close the ui_out table before
3684 printing the breakpoint not found message.
3688 * ui-out.c (ui_out_table_begin): Add parameter ``nr_rows''.
3689 (default_table_begin): Ditto.
3690 (uo_table_begin): Ditto.
3691 * cli-out.c (cli_table_begin): Ditto.
3692 * ui-out.h (ui_out_table_begin): Update
3693 (table_begin_ftype): Update.
3694 * breakpoint.c (breakpoint_1): Pass nr_printable_breakpoints to
3699 * breakpoint.c (breakpoint_1): Restructure. Compute the
3700 nr_printable_breakpoints. Move the header output to before the
3701 main print breakpoints loop.
3702 (user_settable_breakpoint): New function.
3706 * infrun.c, breakpoint.c: Use strncmp as the "mi" test. Allow,
3707 "mi", "mi0" and "mi1".
3711 * gdbarch.sh: Generate an error when conflicting macro
3712 definitions. Generate an error when both pure multi-arch and
3714 * gdbarch.h, gdbarch.c: Regenerate.
3715 * defs.h (GDB_MULTI_ARCH_TM): Rewrite definition.
3719 * config/sparc/tm-sun4sol2.h (GDB_MULTI_ARCH): Down grade to
3720 GDB_MULTI_ARCH_PARTIAL from two.
3725 * cli/cli-script.c (free_command_lines): Reset list pointer.
3729 * arch-utils.c (init_frame_pc_default): New function
3730 * arch-utils.h (init_frame_pc_default): Declare.
3731 * gdbarch.sh (INIT_FRAME_PC): Default to init_frame_pc_default and
3732 not init_frame_pc_noop.
3733 * gdbarch.h, gdbarch.c: Re-generate.
3734 * blockframe.c (INIT_FRAME_PC): Delete macro definition.
3735 * mips-tdep.c (mips_gdbarch_init): Set init_frame_pc to
3740 * gdbarch.c: Regenerate. Out-of-sync with gdbarch.sh.
3744 * gdbarch.sh (CANNOT_FETCH_REGISTER): Multi-arch.
3745 (CANNOT_STORE_REGISTER): Ditto.
3746 * infptrace.c (CANNOT_FETCH_REGISTER): Delete definition.
3747 (CANNOT_STORE_REGISTER): Ditto.
3748 * regcache.c (CANNOT_STORE_REGISTER): Ditto.
3749 * lynx-nat.c (CANNOT_STORE_REGISTER): Ditto.
3750 * arch-utils.h (cannot_register_not): Define.
3751 * arch-utils.c (cannot_register_not): Declare.
3755 * gdbarch.sh: Clarify pre/post default
3756 (INIT_FRAME_PC_FIRST, INIT_FRAME_PC): Multiarch.
3757 * blockframe.c (get_prev_frame): Remove #ifdef from around
3758 INIT_FRAME_PC_FIRST call.
3759 * arch-utils.c (init_frame_pc_noop): Define.
3760 * arch-utils.h (init_frame_pc_noop): Declare.
3761 * config/mips/tm-mips.h (INIT_FRAME_PC_FIRST): Delete.
3762 (INIT_FRAME_PC, mips_init_frame_pc_first): Ditto.
3763 * mips-tdep.c (mips_init_frame_pc_first): Make static.
3764 (mips_gdbarch_init): Initialize init_frame_pc_first.
3765 (mips_dump_tdep): Update.
3769 * infrun.c (context_switch): New function. Abstract the operation
3770 of saving and restoring infrun's state when switching threads.
3771 (handle_inferior_event): Normalize the handling of the 'thread hop'
3772 event (when the wrong thread hits a thread-specific breakpoint,
3773 and we need to solo-step that thread past the breakpoint).
3774 Call keep_going, instead of target_resume. Handle the subsequent
3775 singlestep-trap as a normal event instead of just resuming.
3779 * arch-utils.c (core_addr_identity): New function. Rename
3780 default_convert_from_func_ptr_addr.
3781 * gdbarch.sh (CONVERT_FROM_FUNC_PTR_ADDR): Update.
3782 (ADDR_BITS_REMOVE): Define. Default to core_addr_identity.
3783 * defs.h (ADDR_BITS_REMOVE): Delete macro definition.
3784 * config/mips/tm-mips.h (ADDR_BITS_REMOVE): Delete definition.
3785 * mips-tdep.c (mips_addr_bits_remove): Make static.
3786 (mips_gdbarch_init): Initialize addr_bits_remove.
3791 * configure.tgt: Add S/390 31 & 64 bit target configuration.
3792 * configure.host: Ditto for host.
3796 * gdbarch.sh (EXTRACT_STRUCT_VALUE_ADDRESS_P): Delete definition.
3797 (EXTRACT_STRUCT_VALUE_ADDRESS): Change to a function with
3799 * gdbarch.h, gdbarch.c: Regenerate.
3800 * values.c (value_being_returned): Change the reference to
3801 EXTRACT_STRUCT_VALUE_ADDRESS_P to a function call.
3805 * MAINTAINERS: Add Paul Hilfinger and Joel Brobecker to the
3806 Write After Approval list.
3810 * remote.c (show_remote_protocol_qSymbol_packet_cmd,
3811 set_remote_protocol_qSymbol_packet_cmd): New functions.
3812 (init_all_packet_configs, show_remote_cmd): Add qSymbol packet.
3813 (remote_check_symbols): New function. Implement qSymbol packet,
3814 allowing target to request symbol lookup service from gdb.
3815 (remote_open_1, remote_async_open_1): Call remote_check_symbols,
3816 allowing symbol lookup from exec_bfd on connection to target.
3817 (remote_new_objfile): New function. Catch new objfile notifications
3818 from shared library module, and call remote_check_symbols.
3819 (_initialize_remote): Hook remote_new_objfile into the shared
3820 library notification chain. Add "set remote symbol-lookup" command.
3824 * tracepoint.c (trace_command): We now have tracepoint
3825 events. Get rid of those ugly hooks.
3826 (tracepoint_operation): Likewise.
3827 (trace_pass_command): Likewise.
3831 * gdbthread.h (struct thread_info): Add new fields:
3832 current_line, current_symtab, step_sp, for saved infrun state.
3833 * thread.c (save_infrun_state, load_infrun_state): Save and
3834 restore current_line, current_symtab, and step_sp.
3835 (add_thread): Rather than adding assignments to initialize
3836 the new fields, just use memset (tp, 0, sizeof (*tp).
3837 This way future new fields will not be overlooked.
3838 * infrun.c (handle_inferior_event): Save and restore save_sp,
3839 current_line, and current_symtab when switching threads.
3843 * MAINTAINERS: Add Andrew Cagney as co-maintainer of
3848 * symtab.c (lookup_symtab_1): Replace basename with lbasename.
3849 (lookup_partial_symtab, file_matches): Ditto.
3850 (make_source_files_completion_list): Ditto.
3851 (make_file_symbol_completion_list): Ditto. Make local char*
3852 variable ``tail'' constant.
3853 (make_source_files_completion_list): Ditto with ``base_name''.
3854 * source.c (open_source_file): Use lbasename. Make ``p'' const
3859 * config/i386/xm-go32.h (SLASH_P, ROOTED_P, SLASH_CHAR)
3860 (SLASH_STRING): Remove unused definitions.
3861 * config/i386/xm-cygwin.h: Likewise.
3865 * ui-out.c (ui_out_list_begin): Add parameter ``id''.
3866 (make_cleanup_ui_out_list_begin_end): Ditto. Open the list.
3867 * ui-out.h: Update declarations.
3871 * source.c (openp): Make parameters ``path'' and ``string''
3873 (openp): Use alloca to safely duplicate ``string''. Make local
3874 variables ``p'' and ``p1'' constant. Delete char* casts.
3877 * symtab.c (lookup_symtab_1): Make parameter ``name'' constant.
3878 (lookup_symtab, lookup_partial_symtab): Ditto.
3879 * symtab.h (lookup_symtab, lookup_partial_symtab): Update.
3883 * ui-out.h (ui_out_table_begin): Make char* parameters constant.
3884 (ui_out_table_header, ui_out_field_int): Ditto.
3885 (ui_out_field_core_addr, ui_out_field_string): Ditto.
3886 (ui_out_field_stream, ui_out_field_fmt): Ditto.
3887 (ui_out_field_skip, ui_out_text, ui_out_message): Ditto.
3888 * ui-out.c (ui_out_table_begin, ui_out_table_header): Update.
3889 (ui_out_field_core_addr, ui_out_field_stream): Update.
3890 (ui_out_field_string, ui_out_field_fmt): Update.
3891 (ui_out_text, ui_out_message): Update.
3892 (append_header_to_list): Make char* parameters constant.
3893 (uo_table_header, uo_table_begin): Ditto.
3894 (uo_field_int, uo_field_skip): Ditto.
3895 (uo_field_string, uo_field_fmt): Ditto.
3896 (uo_text, uo_message): Ditto.
3900 * completer.c (gdb_completer_loc_break_characters): New variable.
3901 (line_completion_function): If we are completing on locations,
3902 back up the start of word pointer past all characters which can
3903 appear in a location spec.
3904 (location_completer): New function.
3906 * completer.h: Add prototype for location_completer.
3908 * symtab.c (make_source_files_completion_list)
3909 (add_filename_to_list, not_interesting_fname): New functions.
3910 (filename_seen): New function, body extracted from
3911 output_source_filename.
3912 (output_source_filename): Call filename_seen to check if the file
3913 was already printed.
3914 (make_symbol_completion_list): If TEXT includes a
3915 double-quoted string, return an empty list, not NULL.
3916 (make_file_symbol_completion_list): New function, similar to
3917 make_symbol_completion_list but with an additional argument
3920 * symtab.h (make_file_symbol_completion_list)
3921 (make_source_files_completion_list): Add prototypes.
3923 * breakpoint.c (_initialize_breakpoint): Make location_completer
3924 be the completion function for all commands which set breakpoints
3926 (top-level): #include "completer.h".
3928 * tracepoint.c (_initialize_tracepoint): Make location_completer
3929 be the completion function for the "trace" command.
3930 (top-level): #include "completer.h".
3932 * printcmd.c (_initialize_printcmd): Make location_completer be
3933 the completion function for the "print", "inspect", "call", and
3934 "disassemble" commands.
3935 (top-level): #include "completer.h".
3937 * infcmd.c (_initialize_infcmd): Make location_completer be the
3938 completion function for the "go", "jump", and "until" commands.
3939 (top-level): #include "completer.h".
3943 * gnu-regex.c: Eliminate obsolete check for _MSC_VER.
3944 * utils.c (notice_quit): Remove dummy function only used for _MSC_VER.
3945 * values.c (unpack_double): Remove obsolete check for _MSC_VER.
3947 * m32r-rom.c: Ditto.
3949 * ser-e7kpc.c: Ditto. Define WIN32_LEAN_AND_MEAN under _WIN32, for
3951 (get_ds_base): Remove _MSC_VER version of this function.
3952 * nindy-share/ttyflush.c: Ditto.
3953 * rdi-share/host.h: Ditto.
3954 * ser-go32.c (dos_readchar): Remove call to obsolete function.
3955 * remote-sim.c (gdb_os_poll_quit): Ditto.
3956 * remote-e7000.c (expect): Remove obsolete #if 0'ed code.
3958 * main.c (captured_main): Eliminate special Cygwin checks.
3959 * ser-tcp.c: Remove unneeded __CYGWIN__ guard against system include.
3963 * Makefile.in (gdbcmd_h): Add ui_out_h.
3964 (breakpoint.o, infcmd.o, main.o, printcmd.o, stack.o): Ditto.
3965 (thread.o, top.o): Ditto.
3967 * ui-out.h (table_begin_ftype): Make string parameters constant.
3968 (table_header_ftype): Ditto.
3969 (field_int_ftype): Ditto.
3970 (field_skip_ftype): Ditto.
3971 (field_string_ftype): Ditto.
3972 (field_fmt_ftype): Ditto.
3973 (text_ftype): Ditto.
3974 (message_ftype): Ditto.
3975 * cli-out.c (cli_table_begin): Ditto.
3976 (cli_table_header): Ditto.
3977 (cli_field_int): Ditto.
3978 (cli_field_skip): Ditto.
3979 (cli_field_string): Ditto.
3980 (cli_field_fmt): Ditto.
3982 (cli_message): Ditto.
3983 (out_field_fmt): Ditto.
3984 * ui-out.c (default_table_begin): Ditto.
3985 (default_table_header): Ditto.
3986 (default_field_int): Ditto.
3987 (default_field_skip): Ditto.
3988 (default_field_string): Ditto.
3989 (default_field_fmt): Ditto.
3990 (default_text): Ditto.
3991 (default_message): Ditto.
3995 * breakpoint.c (delete_breakpoint): Pass mark_inserted to
3996 remove_breakpoint, so that the subsequent test for
3997 bpt->inserted will succeed, and duplicates will be fixed up.
4001 * dwarf2read.c (set_cu_language): Handle DW_LANG_Java.
4005 * tracepoint.c (tracepoint_opertation): Add ui event
4007 (trace_pass_command): Ditto.
4011 * MAINTAINERS (Write After Approval): Note the entry criteria.
4012 (HP/PA): Jeff Law stepped down
4016 * gdbarch.sh: Make sure that '[' doesn't interpret interesting
4017 variable values as operators.
4021 * gdb-events.sh: Fix quote escaping which was obsoleted
4026 * gdb-events.sh: Make if statements and tests
4027 a little more portable.
4028 Don't use shell's echo command to put strings containing
4029 escaped characeters into a file -- different flavors of /bin/sh
4030 require differnt levels of escaping. Use cat <<EOF instead.
4031 Our internal field separator is a colon. Change all
4032 commands which assume it is a space.
4036 * lin-lwp.c (struct lwp_info): Add member `resumed'.
4037 (iterate_over_lwps): Make sure we can handle CALLBACK deleting the
4038 LWP it's called for.
4039 (lin_lwp_attach): Mark LWP as resumed to make sure the fake
4040 SIGSTOP is reported.
4041 (resume_clear_callback): New function.
4042 (resume_set_callback): New function.
4043 (lin_lwp_resume): Mark all LWP's that we're going to resume as
4044 resumed, and unmark all others.
4045 (status_callback): Only report a pending wait status if we pretend
4046 that LP has been resumed.
4047 (resumed_callback): New function.
4048 (lin_lwp_wait): Add assertions to check that LWP's are properly
4049 marked as resumed. Partially revert 2001-05-25 patch by Michael
4050 Snyder: do not resume all threads. Add comment explaining the
4051 problems associated with this bit of code.
4055 * MAINTAINTERS: Syd Polk is stepping down from
4056 maintaining libgui. I am replacing him.
4060 * config/mips/tm-irix6.h: New file.
4062 * config/mips/irix6.mh: New file.
4064 * config/mips/irix6.mt: New file.
4066 * config/mips/xm-irix6.h: New file.
4068 * config/mips/nm-irix6.h: New file.
4070 * mips-tdep.c (mips_gdbarch_init) <MIPS_ABI_N32>: Set up the
4071 disassembler info in tm_print_insn_info as appropriate for the N32
4072 ABI. Force N32 ABI to be the default if the CPU is R8000 or
4075 * configure.tgt (mips*-sgi-irix6*): Map to irix6.
4077 * configure.host (mips*-sgi-irix6*): Ditto.
4081 * gnu-v3-abi.c: Include "gdb_assert.h".
4082 (build_gdb_vtable_type): Replace abort() with gdb_assert().
4086 * cp-abi.h: Rearrange code to put documentation comments above the
4087 functions we export. The actual function table itself simply
4088 refers to those functions. Minor doc fixes.
4090 * gdbarch.sh: Changes to effect the following:
4091 * gdbarch.c (initialize_non_multiarch): New function.
4092 * gdbarch.h (initialize_non_multiarch): New declaration.
4093 * arch-utils.c (initialize_current_architecture): For
4094 non-multiarch configurations, call initialize_non_multiarch.
4098 * symfile.c (compare_psymbols): Replace PTR with void*. Delete
4100 (compare_symbols): Ditto.
4104 * arch-utils.c (generic_prepare_to_proceed): Allow for having
4105 stopped due to a Ctrl-C as well as breakpoints.
4107 * hppa-tdep.c (hppa_prepare_to_proceed): Add FIXME as this may not
4108 support thread switches after Ctrl-C.
4109 * lin-lwp.c (lin_lwp_prepare_to_proceed): Ditto.
4110 * linux-thread.c (linuxthreads_prepare_to_proceed): Ditto.
4111 * m3-nat.c (mach3_prepare_to_proceed): Ditto.
4115 * gdbarch.sh, gdbarch.c: Revert change of 2001-06-01; all
4116 per-architecture data should be registered at initialization time,
4117 before any gdbarch objects get used, so the generality is
4122 * gdb-events.sh (function_list): Add tracepoint_create,
4123 tracepoint_delete, and tracepoint_modify events.
4124 * gdb-events.c: Regenerated.
4125 * gdb-events.h: Regenerated.
4129 * gdb-events.sh: Update copyrights.
4130 Change free to xfree.
4131 * gdb-events.c: Regenerated.
4132 * gdb-events.h: Regenerated.
4136 * source.c (mod_path, openp): Use #ifdef HAVE_DOS_BASED_FILE_SYSTEM
4137 instead of #if HAVE_DOS_BASED_FILE_SYSTEM.
4138 * completer.c: Ditto.
4139 * cli/cli-cmds.c (cd_command): Ditto.
4143 * mips-tdep.c (show_mipsfpu_command): Remove unused variable msg.
4144 (mips_set_processor_type_command): Remove unused variable j.
4145 (mips_breakpoint_from_pc): Declare breakpoint instruction
4146 sequences as unsigned char, to avoid compiler warnings.
4148 * source.c (mod_path, openp): Use HAVE_DOS_BASED_FILE_SYSTEM
4149 instead of system-specific define's like _WIN32 and __MSDOS__.
4150 Use IS_DIR_SEPARATOR and IS_ABSOLUTE_PATH instead of SLASH_P and
4152 (top-level): #include "filenames.h".
4154 * solib.c (solib_open): Use IS_DIR_SEPARATOR and IS_ABSOLUTE_PATH
4155 instead of SLASH_CHAR, ROOTED_P and SLASH_P.
4156 (top-level): #include "filenames.h".
4158 * defs.h (SLASH_P, SLASH_CHAR, ROOTED_P): Remove definitions.
4159 (SLASH_STRING): Define only for _WIN32.
4161 * completer.c: Use HAVE_DOS_BASED_FILE_SYSTEM instead of
4164 * cli/cli-cmds.c (cd_command): Use IS_DIR_SEPARATOR and
4165 IS_ABSOLUTE_PATH instead of SLASH_P and ROOTED_P. Replace
4166 system-specific ifdefs with HAVE_DOS_BASED_FILE_SYSTEM.
4167 (top-level): #include "filenames.h".
4169 * go32-nat.c (go32_wait): Change the return value to ptid_t.
4171 * config/djgpp/fnchange.lst: Add two new files in the
4172 gdb/testsuite/gdb.c++/ directory to the remapped names.
4174 * config/djgpp/djconfig.sh (lt_cv_sys_max_cmd_len): Set to 12KB.
4178 Expand the gdbarch per-architecture data vector as needed, rather
4179 than requiring that all per-architecture data be registered before
4180 the first gdbarch object is allocated.
4181 * gdbarch.sh: Changes to effect the following:
4182 * gdbarch.c (alloc_gdbarch_data, init_gdbarch_data): Delete
4183 declarations and definitions.
4184 (check_gdbarch_data): New function, and declaration.
4185 (gdbarch_alloc): Don't call alloc_gdbarch_data; leaving the fields
4186 zero is good enough.
4187 (free_gdbarch_data): Tolerate a null data pointer. Free only
4188 those data items gdbarch->data actually has allocated.
4189 (set_gdbarch_data, gdbarch_data): Call check_gdbarch_data.
4190 (gdbarch_update_p): No need to call init_gdbarch_data.
4194 * ia64-tdep.c (is_float_or_hfa_type_recurse): Call check_typedef()
4195 on types that we wish to recurse on.
4196 (slot_alignment_is_next_even): New function.
4197 (ia64_push_arguments): Call slot_alignment_is_next_even() to
4198 examine the type in order to decide if it's necessary to skip
4203 * thread.c (delete_step_resume_breakpoint): New function.
4204 Maintain internal consistency of the thread list while deleting
4205 a step_resume_breakpoint.
4206 * gdbthread.h (delete_step_resume_breakpoint): Export.
4207 * breakpoint.c (bpstat_find_step_resume_breakpoint):
4208 Make thread-aware: don't return a step_resume_breakpoint
4209 for the wrong thread.
4210 * infrun.c (wait_for_inferior): Call delete_step_resume_breakpoint
4211 instead of delete_breakpoint_current_contents.
4212 (fetch_inferior_event): Ditto.
4213 (handle_inferior_event): Call delete_step_resume_breakpoint
4214 instead of delete_breakpoint.
4215 * infrun.c (handle_inferior_event): After singlestepping over a
4216 thread-specific breakpoint, use currently_stepping() to decide
4217 whether to step or continue.
4221 * gnu-v3-abi.c (gnu_v3_abi_ops, vtable_type_gdbarch_data): Make
4222 these static --- there's no reason other files should use these.
4224 * partial-stab.h (case N_FUN: case 'f':, case N_FUN: case 'F':)
4227 * partial-stab.h: New complaint: function_outside_compilation_unit.
4228 (case N_FUN: case 'f':, case N_FUN: case 'F':): If pst is zero,
4229 complain, and don't try to set pst's start address.
4233 * ia64-linux-tdep.c (IA64_LINUX_SIGCONTEXT_OFFSET): Revise to
4234 match the location at which the kernel is placing the sigcontext
4237 * ia64-tdep.c (max_skip_non_prologue_insns): New static global.
4238 (refine_prologue_limit): New function.
4239 (examine_prologue): Further limit number of instructions
4240 scanned by calling refine_prologue_limit(). Revise way in
4241 which the end of prologue address is computed for frameless
4246 * partial-stab.h: Revert previous patch.
4250 * partial-stab.h: Consistently guard against pst being NULL.
4254 * symfile.c (compare_psymbols, compare_symbols): Declare using
4255 PTR, as in the definition.
4256 * minsyms.c (compare_minimal_symbols): Likewise.
4257 * coffread.c (find_targ_sec): Likewise.
4258 * elfread.c (free_elfinfo, elf_locate_sections): Likewise.
4259 * mipsread.c (alphacoff_locate_sections): Likewise.
4260 * mdebugread.c (compare_blocks): Likewise.
4264 * solib.c (update_solib_list): Move target_resize_to_sections()
4265 into solib_map_sections() loop.
4266 (info_sharedlibrary_command): Try bfd_arch_bits_per_address() if
4267 bfd_get_arch_size() fails.
4271 * Makefile.in (osfsolib.c, osfsolib.o): Rename to solib-osf.c and
4273 * config/alpha/alpha-osf1.mh (NATDEPFILES): Replace osfsolib.o
4274 with solib-osf.o and solib.o.
4275 * config/alpha/alpha-osf2.mh: Likewise.
4276 * config/alpha/alpha-osf3.mh: Likewise.
4277 * solib-osf.c: New file, renamed and largely rewritten from
4282 * lin-lwp.c (lin_lwp_attach_lwp): Call stop_wait_callback,
4283 to consume the SIGSTOP generated by PTRACE_ATTACH.
4284 (stop_wait_callback): If a SIGTRAP or a SIGINT event is consumed,
4285 try again to get the SIGSTOP event.
4286 (lin_lwp_wait): Resume all threads when ignoring a signal.
4287 This will insure that newly attached threads get resumed.
4288 * lin-lwp.c (stop_wait_callback): Discard redundant SIGINT events.
4289 * remote.c (remote_write_bytes): Update 'p' packet pointer.
4293 * gnu-v2-abi.c (gnuv2_virtual_fn_field): There's no need to clear
4294 VALUE_POINTED_TO_OFFSET here; if value_cast doesn't return a
4295 useful value, then we should fix that instead.
4299 * solist.h (struct so_list): Document the requirement that
4300 current_sos initialize some fields to 0.
4304 * gnu-nat.c: Include <ctype.h>.
4305 (gnu_pid_to_exec_file): Add PID parameter.
4306 (set_sig_thread_cmd): Use PIDGET on return value from
4308 (proc_string): Use MERGEPID to construct argument to
4313 * breakpoint.c (breakpoint_address_is_meaningful): New function.
4314 (check_duplicates): Don't compare non-meaningful addresses.
4318 * thread-db.c: Allow for defunct zombie threads.
4319 (attach_thread): Do not attempt to attach zombie thread.
4320 (thread_db_thread_alive): Return false for defunct zombie thread.
4321 (find_new_threads_callback): Don't add defunct zombie thread to list.
4325 Add support for the GNU V3 C++ ABI.
4326 (Includes changes by Dan Berlin.)
4328 * gnu-v3-abi.c: New file.
4329 * minsyms.c: #include "value.h" and "cp-abi.h".
4330 (install_minimal_symbols): Check the minimal symbol table for
4331 symbols that look mangled in the V3 style, and select the V3 ABI
4333 * Makefile.in (SFILES): Add gnu-v3-abi.c.
4334 (COMMON_OBS): Add gnu-v3-abi.o.
4335 (gnu-v3-abi.o): Add new rule.
4336 (minsyms.o): Depend on $(cp_abi_h) and $(value_h).
4340 * values.c (value_primitive_field): If we're extracting a base
4341 class, then the type of the result should be the base class being
4342 extracted, not the type of which it is a base class.
4344 * value.h (struct value): Doc fix, and rearrange members to place
4345 them near their explanations.
4349 * remote.c (remote_async_wait): Added new variable fieldsize.
4350 Add fieldsize (return value of hex2bin) to string pointer p.
4354 * m68hc11-tdep.c (m68hc11_pop_frame): Fix stack pointer computation.
4355 (m68hc11_analyze_instruction): Update the pc correctly.
4356 (m68hc11_guess_from_prologue): Take into account the stack correction
4357 for the saving address.
4361 Changes by Jim Ingham:
4363 * values.c (value_change_enclosing_type): New function. If the
4364 new enclosing type is larger than the old one, we need to allocate
4366 * value.h: Add value_change_enclosing_type prototype.
4367 * valops.c (value_cast): Use it.
4368 (value_assign): Use it.
4369 (value_addr): Use it.
4370 (value_ind): Use it.
4371 (value_full_object): Use it.
4375 * values.c (value_static_field): Handle static fields that have a
4380 * blockframe.c (create_new_frame): Zero all the fields via memset,
4381 rather than zeroing them one by one.
4385 * top.c (user_args): Remove unused declaration.
4389 * infcmd.c (do_registers_info): Move alloca outside of loop.
4393 * remote.c (remote_wait): Added new variable fieldsize.
4394 Add fieldsize (return value of hex2bin) to string pointer p.
4398 * sparc-tdep.c (sparc_gdbarch_init): Get the architecture from
4403 * lin-lwp.c (detach_callback, lin_lwp_wait, lin_lwp_pid_to_str):
4404 Adjust format strings for printing LWPs to account for the fact
4405 that the type returned by GET_LWP() is now a long instead of an
4410 * inferior.h (null_ptid, minus_one_ptid): New variable declarations.
4411 (ptid_build, pid_to_ptid, ptid_get_pid, ptid_get_lwp)
4412 (ptid_get_tid, ptid_equal): New function declarations.
4413 * infrun.c (null_ptid, minus_one_ptid): New variables.
4414 (ptid_build, pid_to_ptid, ptid_get_pid, ptid_get_lwp)
4415 (ptid_get_tid, ptid_equal): New functions.
4416 (_initialize_infrun): Initialize null_ptid, minus_one_ptid,
4417 inferior_ptid, and target_last_wait_ptid.
4419 * defs.h (ptid_t): Redefine to be a struct rather than an int.
4420 (pid_to_ptid, null_ptid, ptid_equal): Delete these macros.
4421 (PIDGET, TIDGET, MERGEPID): Redefine these macros using the
4422 new ptid accessors and constructor.
4424 * config/i386/tm-i386v42mp.h (PIDGET, TIDGET, LIDGET, MERGEPID,
4425 MKLID, MKTID, ISTID): Provide new definitions for these macros.
4426 The old macros are retained, but disabled via #if 0 in order
4427 to aid in future restructuring. See FIXME.
4429 * arm-linux-nat.c (PIDGET, TIDGET): Delete macro definitions.
4430 * i386-linux-nat.c (PIDGET, TIDGET): Likewise.
4431 * infptrace.c (PIDGET, TIDGET): Likewise.
4432 * lin-lwp.c (PIDGET0, PIDGET, TIDGET, MERGEPID): Likewise.
4433 * lin-thread.c (PIDGET0, PIDGET, TIDGET, MERGEPID): Likewise.
4434 * proc-service.c (MERGEPID): Likewise.
4435 * procfs.c (PIDGET, TIDGET, MERGEPID): Likewise.
4436 * thread-db.c (PIDGET0, PIDGET, TIDGET, MERGEPID): Likewise.
4437 * config/nm-linux.h (PIDGET0, PIDGET, TIDGET, MERGEPID): Likewise.
4438 * config/i386/tm-i386sol2.h (PIDGET0, PIDGET, TIDGET, MERGEPID):
4440 * config/sparc/tm-sun4sol2.h (PIDGET0, PIDGET, TIDGET, MERGEPID):
4443 * lin-lwp.c (THREAD_FLAG): Delete macro definition.
4444 (GET_LWP): Redefine in terms of ptid_get_lwp().
4445 (GET_PID): Redefine in terms of ptid_get_pid().
4446 (is_lwp): Redefine without the need for THREAD_FLAG.
4447 (BUILD_LWP): Redefine in terms of ptid_build().
4448 * lin-thread.c (THREAD_FLAG): Delete macro definition.
4449 (GET_LWP): Redefine in terms of ptid_get_lwp().
4450 (GET_PID): Redefine in terms of ptid_get_pid().
4451 (GET_THREAD): Redefine in terms of ptid_get_tid().
4452 (BUILD_THREAD, BUILD_LWP): Redefine in terms of ptid_build().
4453 (is_lwp, is_thread): Redefine.
4454 (linux_child_wait, check_all_signal_numbers)
4455 (linuxthreads_discard_global_state, attach_thread): Declare these
4456 functions to squash warnings about missing declarations.
4457 * sol-thread.c (THREAD_FLAG): Delete macro definition.
4458 (GET_PID): Redefine in terms of ptid_get_pid().
4459 (GET_LWP): Redefine in terms of ptid_get_lwp().
4460 (GET_THREAD): Redefine in terms of ptid_get_tid().
4461 (BUILD_THREAD, BUILD_LWP): Redefine in terms of ptid_build().
4462 (is_lwp, is_thread): Redefine.
4463 * thread-db.c (THREAD_FLAG): Delete macro definition.
4464 (GET_PID): Redefine in terms of ptid_get_pid().
4465 (GET_LWP): Redefine in terms of ptid_get_lwp().
4466 (GET_THREAD): Redefine in terms of ptid_get_tid().
4467 (BUILD_THREAD, BUILD_LWP): Redefine in terms of ptid_build().
4468 (is_lwp, is_thread): Redefine.
4470 * corelow.c (add_to_thread_list, get_core_register_section):
4471 Eliminate hacks needed to prevent regressions when inferior_ptid
4472 wasn't wide enough to hold the core file thread id in the pid
4473 component of inferior_ptid.
4477 * remote.c (hex2bin): Make first argument const.
4478 Require explicit count, don't accept null-terminated str.
4479 (remote_resume, remote_async_resume): White space fix-up.
4480 (remote_write_bytes): Set nr_bytes to return value of bin2hex.
4484 * symtab.c (lookup_symtab_1): Use lbasename (NAME) instead of
4485 basename (NAME). The FreeBSD basename returns a pointer to a
4486 static buffer, even if it's simply returning a string identical to
4488 (lookup_partial_symtab): Likewise.
4492 * solib.c, solib.h: Add comment for function no_shared_libraries.
4496 * solib.h (no_shared_libraries): Make declaration match definition
4501 * remote.c (remote_write_bytes): Set nr_bytes before returning it.
4502 * solib.h (no_shared_libraries): Declare.
4506 * gdbarch.sh (struct gdbarch_info): Delete field bfd_architecture.
4507 (gdbarch_update_p): Rewrite logic filling in INFO struct. Use
4508 user specified values when available.
4509 * rs6000-tdep.c (rs6000_gdbarch_init): Update. Get the
4510 architecture from info.bfd_arch_info.
4511 * gdbarch.c, gdbarch.h: Regenerate.
4515 * remote-e7000.c (e7000_open): Check for bad baud rate.
4516 * remote-st.c (st2000_open): Ditto.
4520 * thread.c (do_captured_list_thread_ids): Use ui_out_tuple_begin
4521 and ui_out_tuple_end instead of ui_out_list_begin and
4524 * Makefile.in (gnu-v2-abi.o): Add $(demangle_h) to list of
4525 dependencies. Reorder dependencies to match #includes in file,
4526 for easier verification.
4530 * breakpoint.c: Replace ui_out_list_begin, ui_out_list_end and
4531 make_cleanup_ui_out_list_end with ui_out_tuple_begin,
4532 ui_out_tuple_end and make_cleanup_ui_out_tuple_begin_end.
4533 * cli/cli-setshow.c: Ditto.
4534 * printcmd.c: Ditto.
4537 * ui-out.h (enum ui_out_type): Fix tipo - tupple -> tuple.
4538 * ui-out.c (ui_out_list_begin): Delete ``lstid'' parameter.
4539 (ui_out_tuple_begin): New function.
4540 (ui_out_tuple_end): New function.
4541 (ui_out_tuple_begin_end): New function.
4542 (make_cleanup_ui_out_list_begin_end): Replace
4543 make_cleanup_ui_out_list_end function.
4544 * ui-out.h (ui_out_list_begin): Update declaration.
4545 (make_cleanup_ui_out_list_begin_end): Replace
4546 make_cleanup_ui_out_list_end declaration.
4547 (ui_out_tuple_begin, ui_out_tuple_end): Declare.
4548 (ui_out_tuple_begin_end): Declare.
4552 * gnu-v2-abi.c: Don't #include "gdb_regex.h". We don't use it.
4557 * config/pa/tm-hppa.h: Remove trigraph.
4558 * hp-symtab-read.c (hpread_type_translate): Provide return value.
4559 (hpread_read_struct_type): Remove trigraph. Add parameter in
4561 (hpread_read_array_type): Provide return value.
4562 (hpread_type_lookup): Avoid ambiguous `else'. Provide return
4564 * hppa-tdep.c (initialize_hp_cxx_exception_support): Remove
4569 * mips-tdep.c (mips_store_return_value,
4570 mips_extract_return_value): Pass arguments to
4571 return_value_location in the proper order.
4575 * Makefile.in (VERSION): Delete. Moved to file ``version.in''.
4576 (version.c): Depends on file ``version.in''. Extract version
4577 number from ``version.in'' file.
4578 (clean mostlyclean): Update.
4579 * version.in: New file.
4584 * breakpoint.c (set_raw_breakpoint): Add new parameter
4585 representing the breakpoint's type. Adjust all callers.
4586 (create_longjmp_breakpoint, create_temp_exception_breakpoint)
4587 (create_thread_event_breakpoint): Don't test for zero return
4588 value from set_raw_breakpoint(). It can never be zero.
4589 (create_exception_catchpoint, watch_command_1): Move logic
4590 which calculates the breakpoint type prior to the call to
4591 set_raw_breakpoint().
4595 * ser-unix.c (rate_to_code): Issue warning if baud rate is invalid.
4596 (hardwire_setbaudrate): Set errno to EINVAL and return with error
4597 if the conversion of the baud rate to code fails.
4601 * ui-out.h (make_cleanup_ui_out_begin_end): Declare.
4602 * ui-out.c (struct ui_out_end_cleanup_data): Define.
4603 (do_cleanup_end): New function. Replace do_list_end.
4604 (make_cleanup_ui_out_end): New function.
4605 (make_cleanup_ui_out_begin_end): New function.
4606 (make_cleanup_ui_out_list_end): Use make_cleanup_ui_out_end.
4610 * MAINTAINERS: Declare xcoffread.c open to all maintainers,
4615 * proc-api.c (ioctl_with_trace): Fix uninitialized variable.
4619 * MAINTAINERS: Add testsuite subdirectory co-maintainers.
4623 * Makefile.in (mi-main.o): Compile with -Werror.
4627 * remote.c (remote_open_1): Call no_shared_libraries, so that
4628 symbols for shared libraries can be reloaded per session.
4629 (remote_async_open_1): Ditto.
4630 * remote.c (bin2hex, hex2bin): New functions. Factor out these
4631 two conversions which are coded for repeatedly in this module.
4632 (remote_threads_extra_info, remote_wait, remote_async_wait,
4633 store_register_using_P, remote_store_registers, remote_write_bytes,
4634 remote_read_bytes, remote_rcmd): Use bin2hex and hex2bin instead
4635 of coding the conversions inline.
4636 (fromhex): Not exported, change from extern to static.
4640 * arch-utils.c (initialize_current_architecture): Delete obsolete
4641 ``info architecture'' command.
4642 (info_architecture): Delete function.
4646 * TODO (5.1, 5.2): Update.
4650 * MAINTAINERS: Jim Ingham is no longer maintaining Arm related
4655 * Makefile.in (SUBDIR_GDBTK_OBS): Add gdbtk-bp.o, gdbtk-register.o
4657 (SUBDIR_GDBTK_SRCS): Ditto for the sources.
4658 (gdbtk-bp.o): New rule.
4659 (gdbtk-register.o): New rule.
4660 (gdbtk-stack.o): New rule.
4661 (gdbtk-cmds.o): Update dependencies.
4663 (gdbtk-hooks.o): Ditto.
4664 (gdbtk-varobj.o): Ditto.
4668 * varobj.c (c_number_of_children): Fix memory leak. Delete unwanted old
4669 variables, not just unregister them.
4673 * varobj.c (c_number_of_children): Check for target type of void*,
4674 not the target type name. Allow dereferencing char*.
4678 * symfile.c (symbol_file_add_main_1): New static function.
4679 Passes the flags arguments to symbol_file_add() and takes care
4680 of any necessary reinitializations.
4681 (symbol_file_command): Call symbol_file_add_main_1() instead of
4683 (symbol_file_add_main): Ditto.
4687 * lin-lwp.c (lin_lwp_pid_to_str): Revert inadvertent format
4688 string change in 2001-05-03 changes.
4689 (lin_lwp_wait): Revert GET_LWP coercion introduced in 2001-05-03
4694 * lin-lwp.c (lin_lwp_attach): Use PIDGET() to fetch the pid
4695 component from inferior_ptid.
4696 (lin_lwp_detach): Use pid_to_ptid() to convert from a pid to a
4701 * sh3-rom.c (_initialize_sh3_rom): Get rid of specific _WINDOWS
4702 conditional for help with connections through parallel ports,
4703 given that the actual code for downloading through a parallel port
4704 is not conditionalized.
4706 * sh-tdep.c: Remove WIN32_WCE conditional. The wince sh target is
4707 unmaintaned, and probably on its way to obsolescence.
4711 * i386-tdep.c (i386_frame_saved_pc): New function.
4712 * config/i386/tm-i386.h (FRAME_SAVED_PC): Redefine in terms of
4713 i386_frame_saved_pc.
4714 (i386_frame_saved_pc): New prototype.
4716 * i386-tdep.c (i386_register_virtual_type): New function.
4717 (i386_register_convertible): New function.
4718 * config/i386/tm-i386.h (REGISTER_VIRTUAL_TYPE): Redefine in terms
4719 of i386_register_virtual_type.
4720 (REGISTER_CONVERTIBLE): Redefine in terms of
4721 i386_register_convertible.
4722 (i386_register_virtual_type, i386_register_convertible): New
4727 * Makefile.in (mn10300-tdep.o): New rule.
4729 * Makefile.in (gdb_string_h): Define. Use it throughout.
4730 Some rules were already using this, even though it isn't defined.
4732 * Makefile.in (obstack_h, target_h): Define; these are already
4733 used elsewhere, but have been expanding to the empty string.
4734 (memattr_h): Define; needed by target_h.
4736 * mn10300-tdep.c (mn10300_extract_return_value): Mark this as
4737 static. (This was accidentally omitted from the earlier patch.)
4739 * mn10300-tdep.c (mn10300_dwarf2_reg_to_regnum): New function.
4740 (mn10300_gdbarch_init): Register it as the architecture's
4741 dwarf2_reg_to_regnum method.
4743 Correct and expand handling of `movm' instruction, and register
4745 * config/mn10300/tm-mn10300.h (D0_REGNUM, A0_REGNUM, MDRQ_REGNUM,
4746 MCRH_REGNUM, MCRL_REGNUM, MCVF_REGNUM): New definitions.
4747 (enum movm_register_bits): New enum.
4748 * mn10300-tdep.c (set_movm_offsets): Use symbolic names for the
4749 bits, not hex literals. Handle the `other', `exreg0', and
4750 `exother' bits. Correct handling of `exreg1': it saves r4, r5,
4751 r6, and r7, not r2, r3, r4, and r5.
4752 (saved_regs_size): New function.
4753 (mn10300_frame_chain, mn10300_frame_saved_pc): Use it, instead
4754 of computing the same thing inline, incorrectly.
4756 * mn10300-tdep.c (mn10300_gdbarch_init): We do have a
4757 dummy_breakpoint_offset; it's zero.
4759 * mn10300-tdep.c (mn10300_pop_frame): Split the mn10300-specific
4760 stuff out into mn10300_pop_frame_regular, and use
4761 generic_pop_current_frame. This lets us share code, and also
4762 makes this function's prototype match that expected by gdbarch.
4763 Make this function static.
4764 (mn10300_pop_frame_regular): New function.
4765 (mn10300_gdbarch_init): Register mn10300_pop_frame as the
4766 gdbarch's pop_frame method.
4767 * config/mn10300/tm-mn10300.h (POP_FRAME): Delete definition.
4768 (mn10300_pop_frame): Delete declaration.
4770 * mn10300-tdep.c (mn10300_saved_pc_after_call,
4771 mn10300_extract_return_value,
4772 mn10300_extract_struct_value_address, mn10300_store_return_value,
4773 mn10300_use_struct_convention, mn10300_breakpoint_from_pc,
4774 mn10300_frame_chain, mn10300_skip_prologue,
4775 mn10300_push_arguments, mn10300_push_return_address,
4776 mn10300_store_struct_return, mn10300_frame_saved_pc,
4777 mn10300_init_extra_frame_info, mn10300_frame_init_saved_regs):
4778 Make these functions static; they should only be visible to the
4779 outside world as gdbarch methods.
4781 * config/mn10300/tm-mn10300.h (mn10300_find_callers_reg): Delete
4784 * mn10300-tdep.c (mn10300_gdbarch_init): Put the gdbarch methods
4785 in some rational order.
4787 * mn10300-tdep.c (mn10300_gdbarch_init): Rather than using
4788 generic_pc_in_call_dummy, use pc_in_call_dummy_at_entry_point.
4790 Use gdbarch for most target parameters for the MN10300, rather
4791 than the tm-*.h file.
4792 * config/mn10300/tm-mn10300.h (MAX_REGISTER_VIRTUAL_SIZE,
4793 REGISTER_BYTES, FP_REGNUM, BREAKPOINT_FROM_PC,
4794 FUNCTION_START_OFFSET, DECR_PC_AFTER_BREAK, INNER_THAN,
4795 SAVED_PC_AFTER_CALL, INIT_EXTRA_FRAME_INFO, FRAME_INIT_SAVED_REGS,
4796 FRAME_CHAIN, FRAME_CHAIN_VALID, FRAME_SAVED_PC,
4797 EXTRACT_RETURN_VALUE, EXTRACT_STRUCT_VALUE_ADDRESS,
4798 STORE_RETURN_VALUE, STORE_STRUCT_RETURN, SKIP_PROLOGUE,
4799 FRAME_ARGS_SKIP, FRAME_ARGS_ADDRESS, FRAME_LOCALS_ADDRESS,
4800 FRAME_NUM_ARGS, POP_FRAME, USE_GENERIC_DUMMY_FRAMES, CALL_DUMMY,
4801 CALL_DUMMY_START_OFFSET, CALL_DUMMY_BREAKPOINT_OFFSET,
4802 CALL_DUMMY_LOCATION, FIX_CALL_DUMMY, CALL_DUMMY_ADDRESS,
4803 TARGET_READ_FP, PUSH_RETURN_ADDRESS, PUSH_DUMMY_FRAME,
4804 SAVE_DUMMY_FRAME_TOS, PUSH_ARGUMENTS, PC_IN_CALL_DUMMY,
4805 REG_STRUCT_HAS_ADDR, USE_STRUCT_CONVENTION, GET_SAVED_REGISTER):
4806 Delete definitions. We register gdbarch methods for these now.
4807 (struct frame_info, struct type, struct value): Delete forward
4808 declarations of these types; they're no longer necessary, since we
4809 don't have function declarations here any more.
4810 * mn10300-tdep.c: #include "arch-utils.h", to get declarations for
4811 some default gdbarch methods.
4812 (mn10300_store_struct_return): Return void, as expected by
4814 (mn10300_init_extra_frame_info): Take initial `fromleaf' argument,
4815 as expected by gdbarch.
4816 (mn10300_frame_init_saved_regs): Provide dummy definition for
4817 this, as required by gdbarch.
4818 (mn10300_gdbarch_init): Add mn10300_call_dummy_words, as expected
4819 by gdbarch. Register gdbarch methods or values for all the stuff
4820 removed from tm-10300.h, listed above.
4824 * cli-out.c (cli_begin, cli_end): Replace cli_list_begin and
4826 (cli_ui_out_impl): Update.
4828 * ui-out.c (default_begin, default_end): Replace
4829 default_list_begin and default_list_end.
4830 (default_ui_out_impl): Update.
4831 (uo_begin, uo_end): Replace ou_list_begin and uo_list_end.
4832 (ui_out_begin, ui_out_end): Replace ui_out_list_begin and
4834 (ui_out_list_begin, ui_out_list_end): New. Compatibility
4836 (struct ui_out_level): Add field type.
4837 (push_level, pop_level): Update. Add type parameter.
4839 * ui-out.h (enum ui_out_type): Declare.
4840 (ui_out_begin, ui_out_end): Declare.
4841 (ui_out_begin_ftype, ui_out_end_ftype): Replace list_begin_ftype
4843 (struct ui_out_impl): Update.
4847 * ui-out.h (list_begin_ftype, list_end_ftype): Rename argument
4848 ``list_flag'' to ``depth''.
4849 * ui-out.c (default_list_begin, default_list_end): Update.
4850 (uo_list_begin, uo_list_end): Update.
4851 (MAX_UI_OUT_LEVELS): Define.
4852 (struct ui_out_level): Define.
4853 (top-level): Include "gdb_assert.h".
4854 (struct ui_out): Add fields ``level'' and ``levels''. Delete
4855 fields ``list_flag'' and ``field_count''.
4856 (ui_out_new): Update.
4857 (verify_field_proper_position): Update.
4858 (current_level, push_level, pop_level): New functions.
4859 (ui_out_list_begin): Use push_level.
4860 (ui_out_list_end): Use pop_level.
4861 (ui_out_field_int): Use current_level.
4862 (ui_out_field_skip): Ditto.
4863 (ui_out_field_fmt): Ditto.
4867 * language.c (longest_local_hex_string_custom): Strlen test is
4868 inverted -- reverse the sense of the test.
4872 * config/i386/tm-i386v.h (struct frame_info, struct
4873 frame_saved_regs): Remove declarations.
4874 (i386_frame_num_args): Remove prototype.
4878 * MAINTAINERS: I'm no longer actively maintaining the mn10300
4883 * main.c (captured_main): Delete #ifndef _WIN32 conditional for
4888 * inferior.h (save_inferior_ptid): Declare.
4889 * infrun.c (save_inferior_ptid, restore_inferior_ptid): Define.
4891 * hpux-thread.c (save_inferior_ptid, restore_inferior_ptid):
4892 Delete these functions.
4893 * lin-lwp.c (save_inferior_ptid, restore_inferior_ptid): Likewise.
4894 * lin-thread.c (save_inferior_ptid, restore_inferior_ptid): Likewise.
4895 * linux-thread.c (save_inferior_ptid, restore_inferior_ptid):
4897 * proc-service.c (save_inferior_ptid, restore_inferior_ptid):
4899 * sol-thread.c (save_inferior_ptid, restore_inferior_ptid): Likewise.
4900 * thread-db.c (save_inferior_ptid, restore_inferior_ptid): Likewise.
4902 * somsolib.c (reset_inferior_ptid): Delete.
4903 (som_solib_remove_inferior_hook): Use save_inferior_ptid() to
4904 build the cleanup struct.
4906 * breakpoint.c (reattach_breakpoints, detach_breakpoints): Use
4907 a cleanup to save/restore inferior_ptid.
4911 Implement attach/detach for multi-threaded programs on Linux.
4912 * thread-db.c (keep_thread_db): Adjust comment.
4913 (deactivate_target): Removed.
4914 (thread_db_new_objfile): Don't call deactivate_target. Implement
4915 guts of deactivate_target inline instead.
4916 (attach_thread): Call ATTACH_LWP unconditionally if defined.
4917 (thread_db_attach): New function.
4918 (thread_db_detach): Don't call deactivate_target. Do necessary
4919 cleanup inline instead. Set inferior_ptid to LWP corresponding to
4920 the current user-level thread.
4921 (thread_db_kill): Set inferior_ptid to LWP corresponding to the
4922 current user-level thread.
4923 (thread_db_create_inferior): Deactivate target vector if
4924 KEEP_THREAD_DB is zero.
4925 (thread_db_mourn_inferior): Don't call deactivate_target. Do
4926 necessary cleanup inline instead.
4927 (init_thread_db_ops): Initialize to_attach field to
4929 * lin-lwp.c (lin_lwp_mourn_inferior): Remove prototype.
4930 (stop_wait_callback): Add prototype.
4931 (init_lwp_list): Add comment about when to re-initialize the LWP
4933 (lin_lwp_attach_lwp): Only call ptrace for cloned processes.
4934 Avoid adding publicates to the LWP list. Only mark an LWP as
4935 signalled if it doesn't correspond to a cloned process.
4936 (lin_lwp_attach): Add initial process to the LWP list. Make sure
4937 it's stopped and fake a SIGSTOP.
4938 (detach_callback): New function.
4939 (lin_lwp_detach): Implement.
4940 (lin_lwp_create_inferior): Don't re-initialize LWP list here.
4941 Call child_ops.to_create_inferior directly instead of via
4942 target_beneath local.
4943 (lin_lwp_mourn_inferior): Call child_ops.to_mourn_inferior
4944 directly instead of via target_beneath local.
4948 * symtab.c (lookup_symtab_1, lookup_partial_symtab): Use basename
4949 instead of non-portable search for `/'. Use FILENAME_CMP instead
4950 of STREQ, to account for case-insensitive filesystems.
4951 (top-level): #include "filenames.h".
4955 * breakpoint.c (check_duplicates): Use the breakpoint's type, not
4956 its address, to decide whether it's a watchpoint or not. Zero
4957 is a valid code address.
4958 (update_breakpoints_after_exec): Admonishing comments.
4959 * breakpoint.h (struct breakpoint): Doc fixes.
4961 * breakpoint.c (check_duplicates): Take a breakpoint object as an
4962 argument, rather than an address and section. All callers changed.
4966 * defs.h (ptid_t): New typedef.
4967 (pid_to_ptid, null_ptid, minus_one_ptid, ptid_equal): New macros.
4969 * a68v-nat.c, alphabsd-nat.c, arch-utils.c, arm-linux-nat.c,
4970 blockframe.c, breakpoint.c, breakpoint.h,
4971 config/i386/nm-i386sol2.h, config/i386/tm-i386sco5.h,
4972 config/ia64/nm-linux.h, config/m68k/nm-hp300bsd.h,
4973 config/mips/nm-irix4.h, config/mips/nm-irix5.h,
4974 config/pa/nm-hppah.h, config/pa/tm-hppa.h,
4975 config/rs6000/nm-rs6000.h, config/sparc/nm-sun4sol2.h,
4976 corelow.c, cxux-nat.c, d10v-tdep.c, dink32-rom.c,
4977 dve3900-rom.c, fork-child.c, frame.c, gnu-nat.c, go32-nat.c,
4978 hp300ux-nat.c, hppa-tdep.c, hppab-nat.c, hppah-nat.c,
4979 hpux-thread.c, i386-linux-nat.c, i386aix-nat.c, i386b-nat.c,
4980 i386bsd-nat.c, i386gnu-nat.c, i386mach-nat.c, i386nbsd-nat.c,
4981 infcmd.c, inferior.h, inflow.c, infptrace.c, infrun.c,
4982 inftarg.c, infttrace.c, lin-lwp.c, lin-thread.c,
4983 linux-thread.c, lynx-nat.c, m3-nat.c, m32r-rom.c,
4984 m68knbsd-nat.c, m88k-nat.c, mac-nat.c, mips-nat.c,
4985 mon960-rom.c, monitor.c, ns32knbsd-nat.c, ocd.c, ppc-bdm.c,
4986 ppcnbsd-nat.c, proc-service.c, procfs.c, ptx4-nat.c,
4987 regcache.c, remote-adapt.c, remote-array.c, remote-bug.c,
4988 remote-e7000.c, remote-es.c, remote-mips.c, remote-mm.c,
4989 remote-nindy.c, remote-os9k.c, remote-rdi.c, remote-rdp.c,
4990 remote-sds.c, remote-sim.c, remote-st.c, remote-udi.c,
4991 remote-vx.c, remote.c, rs6000-nat.c, sol-thread.c,
4992 solib-aix5.c, solib-svr4.c, somsolib.c, sparc-nat.c,
4993 standalone.c, sun3-nat.c, sun386-nat.c, symm-nat.c, target.c,
4994 target.h, thread-db.c, thread.c, top.c, ultra3-nat.c,
4995 uw-thread.c, v850ice.c, win32-nat.c, wince.c, xcoffsolib.c
4996 (inferior_pid): Rename to inferior_ptid everywhere - even in
4997 comments and obsolete ports. In cases where this variable
4998 really is supposed to be used as a process id, use PIDGET() to
4999 extract the process id component from inferior_ptid. The
5000 other cases, either involving other variables whose types had
5001 to be changed or functions whose signatures had to changed
5002 are listed separately below.
5004 * arm-linux-nat.c (get_thread_id): Change type of argument
5005 representing a combined process/thread id from ``int'' to
5006 ``ptid_t''. Also change parameter name to ptid.
5007 * breakpoint.h, breakpoint.c (breakpoint_thread_match): Likewise.
5008 * corelow.c (core_file_thread_alive): Likewise.
5009 * d10v-tdep.c (d10v_read_pc, d10v_write_pc): Likewise.
5010 * defs.h (*target_wait_hook): Likewise.
5011 * gdbthread.h (thread_info, delete_thread, pid_to_thread_id)
5012 (find_thread_pid, save_infrun_state, load_infrun_state): Likewise.
5013 * gnu-nat.c (gnu_thread_alive, gnu_pid_to_str, gnu_wait)
5014 (gnu_resume): Likewise.
5015 * go32-nat.c (go32_wait, go32_resume): Likewise.
5016 * h8500-tdep.c (h8500_read_pc, h8500_write_pc): Likewise.
5017 * hppa-tdep.c (target_read_pc, target_write_pc): Likewise.
5018 * hppah-nat.c (child_pid_to_str, hppa_tid_to_str,
5019 (hppa_pid_or_tid_to_str, child_post_startup_inferior)
5020 (child_thread_alive): Likewise.
5021 * hpux-thread.c (hpux_thread_notice_signals, hpux_thread_alive)
5022 (hpux_pid_to_str, hpux_thread_wait, hpux_thread_resume): Likewise.
5023 * i386-linux-nat.c (child_resume): Likewise.
5024 * ia64-linux-nat.c (enable_watchpoints_in_psr, fetch_debug_register)
5025 (store_debug_register, fetch_debug_register_pair)
5026 (store_debug_register_pair, ia64_linux_insert_watchpoint)
5027 (ia64_linux_remove_watchpoint, ia64_linux_stopped_by_watchpoint):
5029 * ia64-tdep.c (ia64_read_pc, ia64_write_pc): Likewise.
5030 * inferior.h (read_pc_pid, generic_target_read_pc, write_pc_pid)
5031 (generic_target_write_pc, ptrace_wait, child_resume)
5032 (get_last_target_status): Likewise.
5033 * infptrace.c (ptrace_wait, child_resume): Likewise.
5034 * inftarg.c (child_wait, child_post_wait, child_thread_live)
5035 (child_pid_to_str): Likewise.
5036 * infttrace.c (ptrace_wait, child_thread_alive, child_resume)
5037 (hppa_pid_or_tid_to_str, child_post_startup_inferior): Likewise.
5038 * lin-lwp.c (add_lwp, delete_lwp, find_lwp_pid, lin_lwp_attach_lwp)
5039 (lin_lwp_resume, lin_lwp_wait, lin_lwp_thread_alive)
5040 (lin_lwp_pid_to_str): Likewise.
5041 * lin-thread.c (thread_db_alive, thread_db_pid_to_str)
5042 (thread_db_resume, thread_db_wait): Likewise.
5043 * linux-thread.c (linuxthreads_thread_alive, linuxthreads_pid_to_str)
5044 (linuxthreads_resume, linuxthreads_wait): Likewise.
5045 * lynx-nat.c (child_wait, child_thread_alive, child_resume)
5046 (child_pid_to_str): Likewise.
5047 * m3-nat.c (mach_really_wait, m3_resume): Likewise.
5048 * mac-nat.c (child_wait, child_resume): Likewise.
5049 * mips-tdep.c (mips_read_pc): Likewise.
5050 * monitor.c (monitor_wait, monitor_resume): Likewise.
5051 * ocd.c, ocd.h (ocd_thread_alive, ocd_resume): Likewise.
5052 * ppc-bdm.c (bdm_ppc_wait): Likewise.
5053 * procfs.c (do_attach, procfs_wait, procfs_resume)
5054 (procfs_notice_signals, procfs_thread_alive, procfs_pid_to_str)
5055 (procfs_set_watchpoint, procfs_stopped_by_watchpoint)
5056 (procfs_find_LDT_entry): Likewise.
5057 * regcache.c (read_register_pid, read_signed_register_pid)
5058 (write_register_pid, generic_target_read_pc, read_pc_pid)
5059 (generic_target_write_pc, write_pc_pid): Likewise.
5060 * regcache.h (read_register_pid, read_signed_register_pid)
5061 (write_register_pid): Likewise.
5062 * remote-adapt.c (adapt_wait, adapt_resume): Likewise.
5063 * remote-array.c (array_wait, array_resume): Likewise.
5064 * remote-bug.c (bug_wait, bug_resume): Likewise.
5065 * remote-e7000.c (e7000_wait, e7000_resume): Likewise.
5066 * remote-eb.c (eb_wait, eb_resume): Likewise.
5067 * remote-es.c (es1800_wait, es1800_resume): Likewise.
5068 * remote-mips.c (mips_wait, mips_resume): Likewise.
5069 * remote-mm.c (mm_wait, mm_resume): Likewise.
5070 * remote-nindy.c (nindy_wait, nindy_resume): Likewise.
5071 * remote-os9k.c (rombug_wait, rombug_resume): Likewise.
5072 * remote-rdi.c (arm_rdi_wait, arm_rdi_resume): Likewise.
5073 * remote-rdp.c (remote_rdp_resume, remote_rdp_wait): Likewise.
5074 * remote-sds.c (sds_wait, sds_resume): Likewise.
5075 * remote-sim.c (gdbsim_wait, gdbsim_resume): Likewise.
5076 * remote-st.c (st2000_wait, st2000_resume): Likewise.
5077 * remote-udi.c (udi_wait, udi_resume): Likewise.
5078 * remote-vx.c (vx_wait, vx_resume): Likewise.
5079 * remote.c (remote_current_thread, remote_resume, remote_wait)
5080 (remote_async_resume, remote_async_wait, remote_cisco_wait)
5081 (remote_thread_alive): Likewise.
5082 * sol-thread.c (thread_to_lwp, lwp_to_thread, sol_thread_resume)
5083 (sol_thread_wait, sol_thread_notice_signals, sol_thread_alive)
5084 (solaris_pid_to_str): Likewise.
5085 * symm-nat.c (child_wait, child_resume): Likewise.
5086 * target.c (debug_to_resume, debug_to_wait, debug_to_post_wait)
5087 (debug_to_notice_signals, debug_to_thread_alive)
5088 (normal_target_post_startup_inferior, normal_pid_to_str)
5089 (debug_to_post_startup_inferior): Likewise.
5090 * target.h (to_resume, to_wait, to_post_wait)
5091 (to_post_startup_inferior, to_notice_signals, to_thread_alive)
5092 (to_pid_to_str [all in struct target_ops]): Likewise.
5093 (child_post_wait, child_thread_alive, normal_pid_to_str): Likewise.
5094 * thread-db.c (thread_from_lwp, lwp_from_thread, thread_db_wait)
5095 (attach_thread, detach_thread, thread_db_resume, check_event)
5096 (thread_db_post_startup_inferior, thread_db_thread_alive)
5097 (thread_db_pid_to_str): Likewise.
5098 * thread.c (add_thread, delete_thread, find_thread_pid)
5099 (pid_to_thread_id, in_thread_list, load_infrun_state)
5100 (save_infrun_state, switch_to_thread, restore_current_thread)
5101 (make_cleanup_restore_current_thread): Likewise.
5102 * top.c (target_wait_hook): Likewise.
5103 * uw-thread.c (dbgpid, thr_to_lwp, lwp_to_thr, add_thread_uw)
5104 (uw_thread_resume, libtrhead_stub, uw_thread_wait, uw_thread_alive)
5105 (uw_thread_pid_to_str): Likewise.
5106 * v850ice.c (v850ice_wait, v850ice_resume): Likewise.
5107 * win32-nat.c (child_wait, child_resume, win32_child_thread_alive)
5108 (cywin_pid_to_str): Likewise.
5109 * wince.c (child_wait, child_resume, win32_child_thread_alive):
5111 * config/nm-linux.h (linuxthreads_pid_to_str): Likewise.
5112 * config/nm-lynx.h (child_wait, lynx_pid_to_str): Likewise.
5113 * config/alpha/nm-linux.h (lin_lwp_attach_lwp): Likewise.
5114 * config/arm/nm-linux.h (lin_lwp_attach_lwp): Likewise.
5115 * config/h8500/tm-h8500.h (h8500_read_pc, h8500_write_pc): Likewise.
5116 * config/i386/nm-i386sol2.h (procfs_stopped_by_watchpoint)
5117 (procfs_set_watchpoint): Likewise.
5118 * config/i386/nm-linux.h (lin_lwp_attach_lwp): Likewise.
5119 * config/i386/nm-ptx4.h (child_wait): Likewise.
5120 * config/i386/nm-symmetry.h (child_wait): Likewise.
5121 * config/i386/tm-cygwin.h (cygwin_pid_to_str): Likewise.
5122 * config/ia64/nm-linux.h (ia64_linux_stopped_by_watchpoint)
5123 (ia64_linux_insert_watchpoint, ia64_linux_remove_watchpoint)
5124 (lin_lwp_attach_lwp): Likewise.
5125 * config/mips/nm-irix4.h, config/mips/nm-irix5.h
5126 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Likewise.
5127 * config/pa/nm-hppah.h (child_pid_to_str, hppa_tid_to_str)
5128 (hppa_pid_or_tid_to_str): Likewise.
5129 * config/pa/tm-hppa.h (target_read_pc, target_write_pc): Likewise.
5130 * config/powerpc/nm-linux.h (lin_lwp_attach_lwp): Likewise.
5131 * config/sparc/nm-sun4sol2.h (procfs_stopped_by_watchpoint)
5132 (procfs_set_watchpoint): Likewise.
5134 * gdbthread.h (thread_id_to_pid): Change return type which
5135 represents a combined process/thread id from ``int'' to
5137 * gnu-nat.c (gnu_wait): Likewise.
5138 * go32-nat.c (go32_wait): Likewise.
5139 * hpux-thread.c (hpux_thread_wait): Likewise.
5140 * inferior.h (procfs_first_available): Likewise.
5141 * inftarg.c (child_wait): Likewise.
5142 * infttrace.c (ptrace_wait): Likewise.
5143 * lin-lwp.c (lin_lwp_wait): Likewise.
5144 * lin-thread.c (thread_db_wait): Likewise.
5145 * linux-thread.c (linuxthreads_wait): Likewise.
5146 * lynx-nat.c (child_wait): Likewise.
5147 * m3-nat.c (mach_really_wait): Likewise.
5148 * mac-nat.c (child_wait): Likewise.
5149 * monitor.c (monitor_wait): Likewise.
5150 * ppc-bdm.c (bdm_ppc_wait): Likewise.
5151 * procfs.c (do_attach, procfs_wait, procfs_first_available): Likewise.
5152 * remote-adapt.c (adapt_wait): Likewise.
5153 * remote-array.c (array_wait): Likewise.
5154 * remote-bug.c (bug_wait): Likewise.
5155 * remote-e7000.c (e7000_wait): Likewise.
5156 * remote-eb.c (eb_wait): Likewise.
5157 * remote-es.c (es1800_wait): Likewise.
5158 * remote-mips.c (mips_wait): Likewise.
5159 * remote-mm.c (mm_wait): Likewise.
5160 * remote-nindy.c (nindy_wait): Likewise.
5161 * remote-os9k (rombug_wait): Likewise.
5162 * remote-rdi.c (arm_rdi_wait): Likewise.
5163 * remote-rdp.c (remote_rdp_wait): Likewise.
5164 * remote-sds.c (sds_wait): Likewise.
5165 * remote-sim.c (gdbsim_wait): Likewise.
5166 * remote-st.c (st2000_wait): Likewise.
5167 * remote-udi.c (udi_wait): Likewise.
5168 * remote-vx.c (vx_wait): Likewise.
5169 * remote.c (remote_wait, remote_async_wait, remote_current_thread)
5170 (remote_cisco_wait): Likewise.
5171 * sol-thread.c (thread_to_lwp, lwp_to_thread, sol_thread_wait):
5173 * symm-nat.c (child_wait): Likewise.
5174 * target.c (debug_to_wait): Likewise.
5175 * target.h (to_wait [in struct target_ops]): Likewise.
5176 * thread.c (thread_id_to_pid): Likewise.
5177 * thread-db.c (thread_from_lwp, lwp_from_thread, thread_db_wait):
5179 * top.c (*target_wait_hook): Likewise.
5180 * uw-thread.c (lwp_to_thr, uw_thread_wait): Likewise.
5181 * v850ice.c (v850ice_wait): Likewise.
5182 * win32-nat.c (child_wait): Likewise.
5183 * wince.c (child_wait): Likewise.
5184 * config/nm-lynx.h (child_wait): Likewise.
5185 * config/i386/nm-ptx4.h (child_wait): Likewise.
5186 * config/i386/nm-symmetry.h (child_wait): Likewise.
5188 * arch-utils.c (generic_prepare_to_proceed): Rename wait_pid
5189 to wait_ptid and change its type from ``int'' to ``ptid_t''.
5190 * breakpoint.c (reattach_breakpoints, detach_breakpoints): Likewise,
5191 but rename saved_inferior_pid to saved_inferior_ptid.
5192 * d10v-tdep.c (d10v_read_pc, d10_write_pc): Likewise, but rename
5193 save_pid to save_ptid.
5194 * gdbthread.h (struct thread_info): Likewise, but rename pid to ptid.
5195 * hppah-nat.c (child_pid_to_exec): Likewise, but rename
5196 saved_inferior_pid to saved_inferior_ptid.
5197 * hpux-thread.c (main_ptid): Likewise, but rename from main_pid.
5198 * infrun.c (previous_inferior_pid [static global]): Likewise,
5199 but rename to previous_inferior_ptid.
5200 (resume): Likewise, but rename resume_pid to resume_ptid.
5201 (struct execution_control_state): Likewise, but rename
5202 pid to ptid, saved_inferior_pid to saved_inferior_ptid,
5203 and waiton_pid to waiton_ptid.
5204 (target_last_wait_pid): Likewise, but rename to
5205 target_last_wait_ptid.
5206 * infttrace.c (saved_real_pid): Likewise, but rename to
5208 (child_pid_to_exec_file): Likewise, but rename saved_inferior_pid
5209 to saved_inferior_ptid.
5210 * lin-lwp.c (struct lwp_info): Likewise, but rename pid to ptid.
5211 (trap_ptid): Likewise, but renamed from trap_pid.
5212 * lin-thread.c (handle_new_thread): Likewise, but rename gdb_pid
5214 * linux-thread.c (detach_thread): Likewise, but rename pid to ptid.
5215 (thread_db_wait): Likewise, but rename ret_pid to retptid.
5216 * procfs.c (procfs_wait): Likewise, for retval whose name
5217 doesn't change. Also, ``temp'' becomes two separate variables,
5218 one named temp_tid (an int) and the other temp_ptid.
5219 (procfs_notice_thread): Likewise (type change) for gdb_threadid
5220 whose name does not change.
5221 * regcache.c (registers_ptid): Likewise, but renamed from
5223 (read_register_pid, read_signed_register_pid, write_register_pid):
5224 Likewise, but rename save_pid to save_ptid.
5225 (read_pc_pid, write_pc_pid): Likewise, but rename saved_inferior_pid
5226 to saved_inferior_ptid.
5227 * remote.c (remote_newthread_step): Likewise, but rename pid to ptid.
5228 * sol-thread.c (struct ps_prochandle): Likewise.
5229 (sol_thread_resume): Likewise, for save_pid which becomes save_ptid.
5230 (sol_thread_wait): Likewise, for rtnval whose name does not
5231 change, and for save_pid which becomes save_ptid.
5232 (solaris_pid_to_str): Likewise for lwp whose name does not change.
5233 (sol_find_new_threads_callback): Likewise, for pid which becomes
5235 * target.h (target_resume, target_wait, target_post_wait)
5236 (target_post_startup_inferior, target_notice_signals)
5237 (target_thread_alive): Likewise.
5238 * thread.c (info_threads_command): Likewise, but rename
5239 current_pid to current_ptid.
5240 (struct current_thread_cleanup): Likewise, but rename field
5241 inferior_pid to inferior_ptid.
5242 * thread-db.c (find_new_threads_callback): Likewise, but rename
5244 * uw-thread.c (thr_to_lwp): Likewise for lid whose name does not
5246 (lwp_to_tr): Likewise fo tid whose name remains unchanged.
5247 (thr_infpid, lwp_infpid, notice_thread, libthread_stub): Likewise,
5248 but rename pid to ptid.
5249 * config/alpha/nm-linux.h (ATTACH_LWP): Likewise.
5250 * config/arm/nm-linux.h (ATTACH_LWP): Likewise.
5251 * config/i386/nm-linux.h (ATTACH_LWP): Likewise.
5252 * config/ia64/nm-linux.h (ATTACH_LWP): Likewise.
5253 * config/pa/nm-hppah.h (target_tid_to_str): Likewise.
5254 * config/powerpc/nm-linux.h (ATTACH_LWP): Likewise.
5256 * arch-utils.c (generic_prepare_to_proceed): Test for the
5257 "zero" ptid by using ptid_equal() to test to see if variable
5258 in question is the same as null_ptid. This replaces a direct
5260 * cxux-nat.c (add_shared_symbol_files): Likewise.
5261 * i386aix-nat.c, i386b-nat.c (i386_float_info): Likewise.
5262 * infcmd.c (run_command): Likewise.
5263 * inflow.c (kill_command): Likewise.
5264 * infttrace.c (call_ttrace): Likewise.
5265 * lin-lwp.c (lin_lwp_prepare_to_proceed): Likewise.
5266 * lin-thread.c (thread_db_kill): Likewise.
5267 * procfs.c (procfs_kill_inferior, procfs_mourn_inferior): Likewise.
5268 * remote-es.c (es1800_kill): Likewise.
5269 * sol-thread.c (sol_thread_create_inferior): Likewise.
5270 * solib.c (locate_base): Likewise.
5271 * target.c (nosupport_runtime): Likewise.
5272 * thread-db.c (thread_db_wait): Likewise.
5273 * top.c (quit_confirm, quit_force): Likewise.
5274 * uw-thread (lwp_infpid, uw_thread_resume): Likewise.
5276 * infrun.c (handle_inferior_event, stop_stepping, normal_stop):
5277 Use ptid_equal to compare value of process/thread ids instead of
5278 ``=='' and ``!='' operators.
5279 lin-lwp.c (delete_lwp, lin_lwp_prepare_to_proceed)
5280 (stop_wait_callback, lin_lwp_wait): Likewise.
5281 * procfs.c (procfs_wait): Likewise.
5282 * regcache.c (read_register_bytes, read_register_gen)
5283 (write_register_gen, read_register, read_register_pid)
5284 (read_signed_register, read_signed_register_pid, write_register)
5285 (write_register_pid, supply_register): Likewise.
5286 * remote-vx.c (vx_resume): Likewise.
5287 * sol-thread.c (sol_thread_wait): Likewise.
5288 * symm-nat.c (kill_inferior): Likewise.
5289 * thread.c (delete_thread, find_thread_pid, pid_to_thread_id)
5290 (in_thread_list, info_threads_command, switch_to_thread)
5291 (restore_current_thread): Likewise.
5292 * uw-thread (libtread_stub): Likewise.
5294 * arm-linux-nat.c (GET_THREAD_ID): Change PID to PTID.
5296 * corelow.c (add_to_thread_list): Convert argument in add_thread()
5298 * gnu-nat.c (inf_validate_procs): Likewise.
5299 * linux-thread.c (stop_thread, update_stop_threads): Likewise.
5300 * remote.c (record_currthread, remote_threads_info): Likewise.
5301 * win32-nat.c (child_add_thread): Likewise.
5303 * hpux-thread.c (save_inferior_pid, restore_inferior_pid): Rename,
5304 respectively, to save_inferior_ptid() and restore_inferior_ptid().
5305 Adjust implementations to operate on ``ptid_t'' instead of ``int''.
5306 * lin-lwp.c (save_inferior_pid, restore_inferior_pid): Likewise.
5307 * lin-thread.c (save_inferior_pid, restore_inferior_pid): Likewise.
5308 * linux-thread.c (save_inferior_pid, restore_inferior_pid): Likewise.
5309 * proc-service.c (save_inferior_pid, restore_inferior_pid): Likewise.
5310 * sol-thread.c (save_inferior_pid, restore_inferior_pid): Likewise.
5311 * thread-db.c (save_inferior_pid, restore_inferior_pid): Likewise.
5313 * infrun.c (RESUME_ALL): New macro representing the -1 ptid
5314 to be passed to target_resume() when all threads should resume.
5315 (resume): Set resume_ptid to RESUME_ALL rather than -1.
5316 (handle_inferior_event): Invoke target_resume() with RESUME_ALL
5318 * irix5-nat.c (solib_create_inferior_hook): Convert -1 to
5319 a ptid_t in target_resume() call.
5320 * osfsolib.c (solib_create_inferior_hook): Likewise.
5321 * solib-svr4.c (solib_create_inferior_hook): Likewise.
5323 * lin-lwp.c (PIDGET, PIDGET0): Rename original PIDGET macro to
5324 PIDGET0. Define new PIDGET macro which uses PIDGET0, the only
5325 difference being that the 0xffff pattern will be interpreted
5327 * lin-thread.c (PIDGET, PIDGET0): Likewise.
5328 * thread-db.c (PIDGET, PIDGET0): Likewise.
5329 * config/nm-linux.h (PIDGET, PIDGET0): Likewise.
5330 * config/i386/tm-i386sol2.h (PIDGET, PIDGET0): Likewise.
5331 * config/i386/tm-i386v42mp.h (PIDGET, PIDGET0): Likewise.
5332 * config/sparc/tm-sun4sol2.h (PIDGET, PIDGET0): Likewise.
5334 * m3-nat.c (init_m3_ops): Fix typo; initialize to_wait field to
5335 mach_really_wait rather than mach_really__wait.
5336 * lin-thread.c (check_for_thread_event): Fix warning; make function
5337 actually return a value.
5339 * gdbarch.sh (TARGET_READ_PC, TARGET_WRITE_PC): Change type of
5340 ``pid'' arguments from ``int'' to ``ptid_t''. Also renamed
5342 * gdbarch.h, gdbarch.c: Regenerated.
5346 * rdi-share/devsw.c: Include <time.h> for struct tm
5350 * config/djgpp/fnchange.lst: Add mappings for the new
5351 opcodes/openrisc-* files.
5355 * lin-lwp.c: Change printf to fprintf_unfiltered.
5356 * Makefile.in: Add rules for thread-db.o, lin-lwp.o, proc-service.o.
5360 * config/rs6000/tm-rs6000.h (IN_SOLIB_RETURN_TRAMPOLINE): Define.
5361 (rs6000_in_solib_return_trampoline): Declare.
5362 * rs6000-tdep.c (rs6000_in_solib_return_trampoline): New
5364 (rs6000_skip_trampoline_code): Skip bigtoc fixup code.
5365 * xcoffread.c (read_xcoff_symtab): Perform the ISFCN function
5366 check after the CSECT check rather than before it. Allocate
5367 separate symtabs for CSECTs whose names begin with '@'.
5368 (scan_xcoff_symtab): Don't ignore symbols beginning with '@'.
5369 Activate the misc_func_recorded mechanism for whose names begin
5374 * ppcnbsd-nat.c (fetch_inferior_registers)
5375 (store_inferior_registers, fetch_core_registers): Changed to use
5376 fpreg[] instead of r_regs[] to access floating point registers.
5380 * sh-tdep.c: Get rid of the function prototypes.
5381 (sh_sh4_build_float_register_type): Move earlier in file.
5382 (fv_reg_base_num): Ditto.
5383 (dr_reg_base_num): Ditto.
5387 * thread-db.c: Revert 2001-04-26 change for debugging output.
5389 * lin-lwp.c: Add set/show debug lin-lwp command. Use this
5390 command to turn extra debugging output on / off.
5394 * buildsym.c (start_subfile): Use FILENAME_CMP instead of STREQ.
5395 (top-level): #include filenames.h.
5397 * dwarf2read.c (dwarf2_start_subfile): Use IS_ABSOLUTE_PATH and
5398 FILENAME_CMP, to DTRT on non-Posix platforms.
5399 (top-level): #include filenames.h.
5404 * gdbtypes.c (check_stub_method): Always initialize ``p''.
5408 * configure.host: Delete romp host.
5413 * TODO: Updates to 5.1. No more targets to obsolete.
5417 (Changes from Kevin Buettner, with minor update by Don Howard.)
5419 * i387-nat.c (i387_supply_fxsave, i387_fill_fxsave, i387_tag): Fix
5420 typos in which hexadecimal constants were really intended to be
5422 (i387_tag): Swap logic regarding zero vs non-zero exponents.
5423 * MAINTAINERS (Misc): Added myself to the write-after-approval
5428 (Changes from Daniel Berlin, with revisions by Jim Blandy.)
5430 Abstract out operations specific to particular C++ ABI's, and
5431 invoke them through a function table. This removes the C++ ABI
5432 dependencies scattered throughout the code, and allows us to
5433 cleanly add support for new C++ ABI's.
5434 * cp-abi.h, cp-abi.h, gnu-v2-abi.c, hpacc-abi.c: New files.
5435 * c-typeprint.c, c-valprint.c, dbxread.c, eval.c, gdbtypes.c,
5436 jv-typeprint.c, linespec.c, symtab.c, typeprint.c, valops.c:
5437 #include "cp-abi.h". These files all use functions now declared
5439 * symtab.h (OPNAME_PREFIX_P, VTBL_PREFIX_P, DESTRUCTOR_PREFIX_P):
5440 Deleted. These services are now provided by functions declared in
5442 * value.h (value_rtti_type, value_virtual_fn_field): Same.
5443 * values.c (value_virtual_fn_field): Same, for this definition.
5444 * valops.c (value_rtti_type): Same.
5445 * c-typeprint.c (c_type_print_base): Use the functions from
5446 "cp-abi.h", instead of the old macros, or hard-coded ABI-specific
5448 * dbxread.c (record_minimal_symbol): Same.
5449 * gdbtypes.c (get_destructor_fn_field, virtual_base_index,
5450 virtual_base_index_skip_primaries): Same.
5451 * jv-typeprint.c (java_type_print_base): Same.
5452 * linespec.c (find_methods, decode_line_1): Same.
5453 * symtab.c (gdb_mangle_name): Same.
5454 * Makefile.in (SFILES): Add the new .c files mentioned above.
5455 (cp_abi_h): New variable.
5456 (COMMON_OBS): Add gnu-v2-abi.o, hpacc-abi.o, and cp-abi.o.
5457 (cp-abi.o, gnu-v2-abi.o, hpacc-abi.o): New targets.
5458 (c-typeprint.o, c-valprint.o, dbxread.o, eval.o, gdbtypes.o,
5459 jv-typeprint.o, symtab.o, linespec.o, typeprint.o, valops.o): Add
5460 dependency on $(cp_abi_h).
5464 * thread-db.c (_initialize_thread_db): Add set/show command
5465 "debug-linux-threads" for debugging output.
5466 * lin-lwp.c (various): Use global "debug_linux_threads to
5467 turn on extra debugging output.
5468 * lin-lwp.c: Minor cleanups in comments.
5469 * target.c (normal_pid_to_str): Get rid of an ancient hack.
5470 * remote.c (remote_pid_to_str): New function for remote target.
5474 * c-typeprint.c (c_type_print_cv_qualifier): Don't print `const'
5475 qualifier on C++ references; all references are innately const.
5479 * event-top.h: Fix formatting.
5483 * source.c (openp): Obsolete #ifdef MPW code.
5484 (open_source_file): Ditto.
5485 * event-top.c (display_gdb_prompt): Ditto.
5486 * utils.c (query): Ditto.
5487 (init_page_info): Ditto.
5488 (init_page_info): Delete #ifndef MPW.
5489 * top.c (gdb_readline): Ditto.
5490 * mac-xdep.c: Obsolete.
5491 * mac-gdb.r: Obsolete.
5492 * config/powerpc/xm-mpw.h: Obsolete.
5493 * config/xm-mpw.h: Obsolete.
5494 * mpw-make.sed: Obsolete.
5495 * mpw-config.in: Obsolete.
5501 * i386-tdep.c (i386_frameless_function_invocation): New function.
5502 * config/i386/tm-i386.h (FRAMELESS_FUNCTION_INVOCATION): Redefine
5503 in terms of i386_frameless_function_invocation. Adjust comment.
5504 (i386_frameless_function_invocation): New prototype.
5508 * top.c (gdb_init): Don't call cli_out_new() to
5509 create global uiout if init_ui_hook is set. uiout will
5510 have to be initialized there.
5514 * arch-utils.c: Include "regcache.h".
5518 * i386-tdep.c (i386_saved_pc_after_call): New function.
5519 * config/i386/tm-i386.h (SAVED_PC_AFTER_CALL): Redefine in terms
5520 of i386_saved_pc_after_call.
5521 (i386_saved_pc_after_call): New prototype.
5525 * i386-nat.c: Fix typo in comment.
5526 * solib.c (no_shared_libraries): New function. Discard all symbols
5527 from shared libraries.
5528 (_initialize_solib): Add command "nosharedlibrary" as complement
5529 to the command "sharedlibrary". Unloads symbols for all solibs.
5533 * configure.host (m68030-sony-*, m68*-isi-*, m68*-sony-*):
5534 * configure.tgt (m68*-rom68k-*, m68*-*bug-*, m68*-monitor-*)
5535 (m68*-est-*, m68*-sony-*, m68*-isi-*):
5536 * Makefile.in (xm-news1000.h, tm-news.h, xm-news.h): Obsolete..
5537 * config/m68k/xm-news.h: Obsolete.
5538 * config/m68k/tm-news.h:
5539 * config/m68k/xm-news1000.h: Obsolete.
5540 * config/m68k/news.mh: Obsolete.
5541 * config/m68k/news.mt: Obsolete.
5542 * config/m68k/nm-news.h: Obsolete.
5543 * config/m68k/news1000.mh: Obsolete.
5544 * news-xdep.c: Obsolete.
5545 * Makefile.in (isi-xdep.o): Obsolete.
5546 (ALLDEPFILES): Delete isi-xdep.c.
5547 (tm-isi.h): Obsolete.
5548 * m68k-tdep.c (altos_skip_prologue): Update comments.
5549 (isi_skip_prologue): Obsolete.
5550 * isi-xdep.c: Obsolete.
5551 * config/m68k/xm-isi.h: Obsolete.
5552 * config/m68k/isi.mh: Obsolete.
5553 * config/m68k/tm-isi.h: Obsolete.
5554 * config/m68k/isi.mt: Obsolete.
5561 * remote.c (remote_open_1): On opening the remote target, activate
5562 the solib_create_inferior_hook, so that it can detect when the
5563 target loads shared libraries.
5564 (remote_async_open_1): Ditto.
5568 * breakpoint.c (print_one_breakpoint): Handle 64-bit addresses.
5569 * tracepoint.c (tracepoints_info): Handle 64-bit addresses.
5570 * testsuite/gdb.trace/deltrace.exp: Allow for 64-bit addresses.
5571 * testsuite/gdb.trace/infotrace.exp: Ditto.
5572 * testsuite/gdb.trace/passcount.exp: Ditto.
5573 * testsuite/gdb.trace/while-stepping.exp: Ditto.
5577 * thread-db.c (check_thread_signals): When looping over all
5578 signals, ignore signal zero.
5579 (disable_thread_signals): Ditto.
5583 * thread.c (do_captured_thread_select): Allow the argument to the
5584 thread command to be an expression rather than a literal integer.
5588 * i386-linux-tdep.c (i386_linux_saved_pc_after_call): Use
5589 read_memory_unsigned_integer instead of read_memory_integer.
5593 * solib-aix5.c (map_index_vs_section_name_okay): New function.
5594 (aix5_relocate_main_executable): Don't use file offsets for
5595 determining corresponding sections and map file entries. Call
5596 map_index_vs_section_name_okay() to do this instead.
5600 * procfs.c (open_with_retry): New function.
5601 (open_procinfo_files, load_syscalls, proc_iterate_over_mappings)
5602 (proc_get_LDT_entry): Call open_with_retry() instead of open().
5606 * ia64-linux-nat.c (ia64_linux_stopped_by_watchpoint): Adjust
5607 comparison against TRAP_HWBKPT constant yet again to account
5608 for the various values used by different kernel versions.
5612 * demangle.c (_initialize_demangler): Use xcalloc on the
5613 demangling_style_names, and make it a null terminated array of
5614 names, to avoid a crash.
5618 * i386-tdep.c (i386_frame_chain): New function.
5619 * config/i386/tm-i386.h (FRAME_CHAIN): Redefine in terms of
5621 (i386_frame_chain): New prototype.
5625 * target.h (target_ops): Removed to_core_file_to_sym_file vector
5627 * corelow.c (core_ops): Updated for above change.
5628 * gnu-nat.c (core_ops): Likewise.
5629 * inftarg.c (child_ops): Likewise.
5630 * monitor.c (monitor_ops): Likewise.
5631 * ppc-bdm.c (bdm_ppc_ops): Likewise.
5632 * remote-adapt.c (adapt_ops): Likewise.
5633 * remote-bug.c (bug_ops): Likewise.
5634 * remote-e7000.c (e7000_ops): Likewise.
5635 * remote-eb.c (eb_ops): Likewise.
5636 * remote-es.c (es1800_ops, es1800_child_ops): Likewise.
5637 * remote-mm.c (mm_ops): Likewise.
5638 * remote-nindy.c (nindy_ops): Likewise.
5639 * remote-nrom.c (nrom_ops): Likewise.
5640 * remote-os9k.c (rombug_ops): Likewise.
5641 * remote-rdp.c (remote_rdp_ops): Likewise.
5642 * remote-sim.c (gdbsim_ops): Likewise.
5643 * remote-st.c (st2000_ops): Likewise.
5644 * v850ice.c (v850ice_ops): Likewise.
5645 * target.c (cleanup_target): Likewise
5646 (update_current_target): Likewise.
5647 (setup_target_debug): Likewise
5648 (debug_to_core_file_to_sym_file): Removed.
5650 * corefile.c (core_file_command) [HPUXHPPA]: Removed code that
5651 sets symbol file from information obtained from the core file.
5652 * corelow.c (core_file_to_sym_file): Removed.
5657 Fixed Insight on Solaris. It was not possible to debug a process
5658 because of EINTR "errors".
5659 * procfs.c: (procfs_wait): if proc_wait_for_stop() fails
5660 with EINTR, retry the call.
5664 * solib-aix5.c (enum maptype): Delete.
5665 (struct lm_info): Add new member ``nmappings''. Make ``mapping''
5666 member a pointer instead of a statically sized array.
5667 (build_so_list_from_mapfile): Dynamically allocate ``mapping''
5669 (aix5_relocate_main_executable, aix5_relocate_section_addresses,
5670 aix5_find_global_pointer): Search for correct mapping to use
5671 based on file offset instead of knowledge of whether the section
5672 is read-only or read/write.
5673 (aix5_find_gate_addresses): Use the first mapping instead of
5674 the (now defunct) MT_READONLY mapping.
5678 * xcoffread.c (scan_xcoff_symtab): Ignore symbols beginning with
5683 * config/i386/fbsd.mh (NATDEPFILES): Add i386-nat.o.
5687 Obsolete i[3456]86-*-sunos* (aka Sun386) host and target.
5688 * config/i386/sun386.mh: Obsolete.
5689 * config/i386/sun386.mt: Obsolete.
5690 * config/i386/xm-sun386.h: Obsolete.
5691 * config/i386/tm-sun386.h: Obsolete.
5692 * config/i386/nm-sun386.h: Obsolete.
5693 * Makefile.in (ALLDEPFILES): Delete sun386-nat.c.
5694 (sun386-nat.o): Target is obsolete.
5695 * sun386-nat.c: Obsolete.
5696 * configure.tgt (i[3456]86-*-sunos*): Obsolete.
5697 * configure.host (i[3456]86-*-sunos*): Obsolete.
5703 * maint.c: Fix typo in comment.
5707 * MAINTAINERS: Swap with Syd Polk as a gdbtk maintainer.
5711 * fork-child.c (fork_inferior, clone_and_follow_inferior):
5712 Document fact that apparent call to vfork() might actually be
5713 a call to fork() instead.
5714 * ser-pipe.c (pipe_open): Likewise.
5718 * printcmd.c (print_frame_args): Use a cleanup to invoke
5719 ui_out_list_end() so that the list count nesting flag will
5720 be decremented properly when an error occurs.
5721 * stack.c (print_frame): Likewise.
5725 * dcache.c (dcache_write_line): Fixed bugs where cache line was
5726 not written to target correctly.
5728 * gdbserver/low-hppabsd.c (read_inferior_memory): Add explicit
5730 * gdbserver/low-nbsd.c: Likewise.
5731 * gdbserver/low-sparc.c: Likewise.
5732 * gdbserver/low-sun3.c: Likewise.
5736 * config/rs6000/nm-rs6000.h (PTRACE_ATTACH): Don't define.
5737 (PTRACE_DETACH): Don't define.
5741 * arch-utils.c (default_prepare_to_proceed)
5742 (generic_prepare_to_proceed): Added new functions.
5743 * arch-utils.h: New function declarations for
5744 default_prepare_to_proceed() and generic_prepare_to_proceed().
5745 * gdbarch.sh: Added PREPARE_TO_PROCEED.
5746 * gdbarch.c: Regenerated.
5747 * gdbarch.h: Regenerated.
5748 * inferior.h: Added get_last_target_status() declaration.
5749 * infrun.c (get_last_target_status): Added new function.
5750 (handle_inferior_event): Saves last pid and waitstatus, which will
5751 get returned by get_last_target_status().
5753 * hppa-tdep.c (prepare_to_proceed): Added comment stating that
5754 prepare_to_proceed() is potentially redundant since
5755 default_prepare_to_proceed() has been added.
5756 * linux-thread.c (prepare_to_proceed): Ditto.
5757 * lin-lwp.c (prepare_to_proceed): Ditto.
5758 * m3-nat.c (prepare_to_proceed): Ditto.
5762 Obsolete powerpcle-*-cygwin* and powerpcle-*-solaris* platforms
5763 and powerpc-*-netware* target.
5764 * configure.host (powerpcle-*-cygwin*, powerpcle-*-solaris*):
5766 * configure.tgt (powerpc-*-netware*, powerpcle-*-cygwin*)
5767 (powerpcle-*-solaris*): Obsolete.
5768 * config/powerpc/tm-cygwin.h: Obsolete.
5769 * config/powerpc/cygwin.mt: Obsolete.
5770 * config/powerpc/xm-cygwin.h: Obsolete.
5771 * config/powerpc/cygwin.mh: Obsolete.
5772 * config/powerpc/nm-solaris.h: Obsolete.
5773 * config/powerpc/xm-solaris.h: Obsolete.
5774 * config/powerpc/tm-solaris.h: Obsolete.
5775 * config/powerpc/solaris.mt: Obsolete.
5776 * config/powerpc/tm-ppc-nw.h: Obsolete.
5777 * config/powerpc/ppc-nw.mt: Obsolete.
5783 * buildsym.c (record_line): Turn off unused addr bits.
5788 * inferior.h: Fix declarations of get_inferior_args and
5789 set_inferior_args, which were missing the trailing 's'.
5793 * monitor.c (monitor_supply_register): Only report an error if we
5794 don't get a valid value.
5798 * README: Don't mention gdba.el.
5803 * top.c (init_main): set prompt if annotation_level>1,
5804 this is necessary when annotation_level is set to 2 via
5805 --annotate=2 command line option.
5809 Obsolete a29k-*-* host and a29k-*-sym1* and a29k-*-kern* targets.
5810 * configure.tgt (a29k-*-sym1*, a29k-*-kern*): Obsolete.
5811 * configure.host (a29k-*-*): Obsolete.
5812 * Makefile.in (ALLDEPFILES): Remove ultra3-nat.c and
5814 (ultra3-nat.o, ultra3-xdep.o): Obsolete.
5815 * config/a29k/tm-ultra3.h: Obsolete.
5816 * config/a29k/ultra3.mt: Obsolete.
5817 * config/a29k/ultra3.mh: Obsolete.
5818 * config/a29k/nm-ultra3.h: Obsolete.
5819 * config/a29k/xm-ultra3.h: Obsolete.
5820 * ultra3-xdep.c: Obsolete.
5821 * ultra3-nat.c: Obsolete.
5822 * config/a29k/a29k-kern.mt: Obsolete.
5828 * main.c: Remove windows.h use.
5829 (gdbtk_test): Use PATH_MAX for home var calculation.
5830 * remote-e7000.c (e7000_parse_device): Accomodate Cygwin as well as
5831 Win32 in colon test.
5832 * ser-tcp.c: Use modern __CYGWIN__ conditional.
5833 * source.c (mod_path): Add __CYGWIN__ conditional to WIN32 test.
5835 * symfile.c (symfile_bfd_open): Ditto.
5839 * main.c (captured_main): For GDBtk, don't use tui_fileopen().
5840 Handle all stream setup in gdbtk_init
5844 * i386-tdep.c (i386_extract_return_value): Don't return the return
5845 value of a void function.
5846 (i386_store_return_value): Likewise.
5850 Obsolete w65-*-* target.
5851 * configure.tgt (w65-*-*): Obsolete.
5852 * config/w65/w65.mt: Obsolete.
5853 * config/w65/tm-w65.h: Obsolete.
5854 * w65-tdep.c: Obsolete.
5855 * NEWS: Update. Fix TiC80 description.
5860 Obsolete tic80-*-* target.
5861 * configure.tgt (tic80-*-*): Obsolete.
5862 * config/tic80/tic80.mt: Obsolete.
5863 * config/tic80/tm-tic80.h: Obsolete.
5864 * tic80-tdep.c: Obsolete.
5870 * remote-mips.c (S_IROTH): Moved definition from here.
5871 * gdb_stat.h (S_IROTH): to here.
5873 * remote.c (remote_protocol_e, remote_protocol_E): Define.
5874 (set_remote_protocol_e_packet_cmd)
5875 (set_remote_protocol_E_packet_cmd)
5876 (show_remote_protocol_e_packet_command)
5877 (show_remote_protocol_E_packet_command): New functions.
5878 (init_all_packet_configs): Initialize remote_protocol_e and
5880 (remote_resume, remote_async_resume): Support e/E command
5882 (show_remote_cmd): Show state of remote_protocol_e and
5884 (_initialize_remote): Add "set remote step-over-range-packet"
5885 and "set remote step-over-range-w-signal-packet" to CLI.
5889 Obsolete ns32k-*-mach3*, ns32k-umax-*, ns32k-utek-sysv* and
5891 * Makefile.in (ALLDEPFILES): Delete umax-xdep.c and ns32km3-nat.c.
5892 (umax-xdep.o, ns32km3-nat.o): Obsolete.
5893 * configure.tgt (ns32k-*-mach3*, ns32k-utek-sysv*, ns32k-utek-*):
5895 * configure.host (ns32k-*-mach3*, ns32k-umax-*, ns32k-utek-sysv*):
5897 * config/ns32k/merlin.mh: Obsolete.
5898 * config/ns32k/merlin.mt: Obsolete.
5899 * config/ns32k/xm-merlin.h: Obsolete.
5900 * config/ns32k/tm-merlin.h: Obsolete.
5901 * config/ns32k/nm-umax.h: Obsolete.
5902 * config/ns32k/umax.mh: Obsolete.
5903 * config/ns32k/umax.mt: Obsolete.
5904 * config/ns32k/xm-umax.h: Obsolete.
5905 * umax-xdep.c: Obsolete.
5906 * config/ns32k/ns32km3.mh: Obsolete.
5907 * config/ns32k/ns32km3.mt: Obsolete.
5908 * config/ns32k/tm-ns32km3.h: Obsolete.
5909 * config/ns32k/xm-ns32km3.h: Obsolete.
5910 * ns32km3-nat.c: Obsolete.
5911 * ns32k-tdep.c (merlin_skip_prologue): Obsolete.
5912 (merlin_frame_num_args): Ditto.
5918 * config/djgpp/fnchange.lst: Tweak due to
5919 expect/example/chesslib.c.
5923 * m88k-tdep.c (examine_prologue): Change type of ``insn'' from
5924 unsigned int to unsigned long. Also, fix format string.
5925 (pop_frame): Fix PC_IN_CALL_DUMMY() call so that it doesn't
5926 use an undeclared variable. Also, delete declaration and
5927 initialization of ``fp'' because it is otherwise unused.
5928 * remote-bug.c (sleep): Delete declaration.
5929 (bug_store_register, bug_write_memory, bug_read_memory)
5930 (bug_insert_breakpoint, bug_remove_breakpoint): Fix sprintf()
5931 format statements and cast certain sprintf() arguments to
5933 (bug_load): Likewise for call to printf_filtered().
5934 * config/m88k/tm-m88k.h (FIX_CALL_DUMMY): Eliminate
5935 assignment to ``pc''. The necessary assignment is done in
5936 hand_function_call() after the invocation of FIX_CALL_DUMMY().
5940 * symtab.c (completion_list_add_name): Remove duplicate string checks,
5941 readline already does this, and it's much faster at it, too.
5945 * go32-nat.c: Minor tweaks, to pacify the ari script.
5949 * i386-tdep.c (i386_extract_struct_value_address): New function.
5950 * config/i386/tm-i386.h (EXTRACT_STRUCT_VALUE_ADDRESS): Redefine
5951 in terms of i386_extract_struct_value_address.
5952 (i386_extract_struct_value_address): New prototype.
5954 * i386-linux-nat.c (i386_linux_dr_get): Change type of return
5955 value to `unsigned long'. Change type of `value' to `unsigned
5957 (i386_linux_dr_set): Change type of second argument to `unsigned
5959 (i386_linux_dr_set_control): Change type of first argument to
5961 (i386_linux_dr_get_status): Change type of return value to
5963 * config/i386/nm-linux.h (i386_linux_dr_set_control,
5964 i386_linux_dr_get_status): Adjust prototypes accordingly.
5968 * ia64-linux-nat.c (ia64_linux_stopped_by_watchpoint): Change
5969 TRAP_HWBKPT constant to match that in the kernel headers for
5974 * i386bsd-nat.c: Include "gdb_assert.h".
5975 [HAVE_PT_GETDBREGS] (DBREG_DRX): Define if not
5977 [HAVE_PT_GETDBREGS] (i386bsd_dr_set, i386bsd_dr_set_control,
5978 i386bsd_dr_set_addr, i386bsd_dr_reset_addr,
5979 i386bsd_dr_get_status): New functions.
5980 * config/i386/nm-fbsd.h [HAVE_PT_GETDBREGS]
5981 (I386_USE_GENERIC_WATCHPOINTS): Define.
5982 Include "i386/nm-i386.h".
5983 (I386_DR_LOW_SET_CONTROL, I386_DR_LOW_SET_ADDR,
5984 I386_DR_LOW_RESET_ADDR, I386_DR_LOW_GET_STATUS): New macros.
5985 (i386bsd_dr_set_control, i386bsd_dr_set_addr,
5986 i386bsd_dr_reset_addr, i386bsd_dr_get_status): New prototypes.
5987 * acconfig.h (HAVE_PT_GETDBREGS): New configure macro.
5988 * configure.in: Cleanup a few comments. Check for PT_GETDBREGS
5990 * config.in, configure: Regenerate.
5992 * i386-nat.c (i386_insert_aligned_watchpoint): Set address
5993 register before enabling it by setting the control register.
5994 (i386_remove_aligned_watchpoint): Reset address register after
5995 disabling it by setting the control register.
5997 * i386-tdep.c (i386_extract_return_value): If the type of the
5998 return value is TYPE_STRUCT and the number of fields is one, call
5999 ourselves with TYPE set tp the type of the first field.
6000 (i386_store_return_value): Likewise.
6001 This fixes a problem with returning structs consisting of a single
6002 `float' or `double' on *BSD.
6006 * lin-lwp.c (lin_lwp_resume): Don't mark LWP as not stopped until
6007 we're absolutely sure we're going to resume it.
6009 * thread-db.c (check_event): Don't report an error if we encounter
6010 a thread creation event for a thread that's already in the thread
6011 list, since that may legitemately happen. Instead only call
6012 attach_thread if it's not already in the thread list.
6016 * config/pa/xm-hppah.h (malloc): Really delete declaration
6017 (MALLOC_INCOMPATIBLE): Really delete macro.
6018 * cli/cli-cmds.c (apropos_command): Use xcalloc.
6022 * configure.in (build_warnings): Add -Wuninitialized.
6023 * configure: Regenerate.
6025 * v850-tdep.c (v850_scan_prologue): Initialize ``insn2''.
6026 * sparc-tdep.c (sparc64_push_arguments): Add default case to
6028 * sh-tdep.c (sh_do_fp_register): Replace ``?:'' printf format
6029 expression with if statement.
6030 * mn10200-tdep.c (mn10200_analyze_prologue): Initialize
6032 * mips-tdep.c (show_mipsfpu_command): Add default case to switch.
6033 (mips_dump_tdep): Fix setting of ef_mips_arch.
6034 * mcore-tdep.c (mcore_analyze_prologue): Initialize ``fp_regnum''.
6035 * dsrec.c (make_srec): Always initialize ``binbuf''.
6036 * monitor.c (monitor_read_memory_single): Do not pass an
6037 uninitialized buffer to monitor_error. Make ``i'' more local.
6041 * MAINTAINERS: Change ns32k target to ,-Werror.
6043 * ns32k-tdep.c: Include "gdbcore.h"
6044 (flip_bytes): Change first argument to void*. Add forward
6046 (sign_extend): Add declaration.
6047 (merlin_frame_num_args): Add final else clause to if-else chain.
6048 (umax_frame_num_args): Ditto.
6049 * config/ns32k/tm-umax.h (ns32k_localcount): Declare.
6050 (flip_bytes): Ditto.
6054 * i386-linux-tdep.c (FRAMELESS_SIGNAL): Moved here from
6055 config/i386/nm-linux.h (including comment).
6056 (i386_linux_frame_chain): New function implementing guts of the
6057 former FRAME_CHAIN macro, but using read_memory_unsigned_integer
6058 instead of read_memory_integer.
6059 (i386_linux_frame_saved_pc): Removed doc pointing to
6060 i386/tm-linux.h for an explanation of FRAMELESS_SIGNAL since that
6061 now lives in this file.
6062 * config/i386/tm-linux.h (FRAMELESS_SIGNAL): Moved to
6063 i386-linux-tdep.c (including comment).
6064 (FRAME_CHAIN): Redefined in terms of i386_linux_frame_chain.
6065 (i386_linux_frame_chain): New prototype.
6067 * gdbserver/low-linux.c [I386_GNULINUX_TARGET]: Cleanup code and
6069 (NUM_FREGS): Redefine to 0.
6070 (NUM_REGS): Redefine as NUM_GREGS.
6071 (i386_register_byte, i386_register_raw_size): Update from
6072 i386-tdep.c. Add comment about their origin.
6073 (regmap, register_u_addr): Take these from i386-linux-nat.c.
6074 (i386_register_u_addr): Removed.
6076 * i386-linux-nat.c (i386_linux_dr_get): Return 0 if ptrace call
6077 fails instead of calling perror_with_name. This should fix
6078 debugging remote i386 targets with a native Linux/x86 GDB. Add
6079 FIXME for this hack.
6083 * arch-utils.c (#include "gdbthread.h"): Removed.
6084 (#include "symfile.h"): Removed.
6085 (XMALLOC): Removed unused macro.
6086 * breakpoint.c (tbreak_command): Removed local declaration.
6087 (awatch_command, do_enable_breakpoint, set_breakpoint_count):
6088 Remove duplicate declarations.
6089 (bpstat_should_step, bpstat_have_active_hw_watchpoints)
6090 (remove_solib_event_breakpoints): Fix indentation botch.
6091 * c-typeprint.c (#include "command.h"): Removed.
6092 (#include "gdbcmd.h"): Removed.
6093 * ch-exp.c (ch_terminal_match_float_literal, parse_expr)
6094 (parse_primval, parse_untyped_expr, parse_opt_untyped_expr):
6095 Removed duplicate declarations.
6096 * ch-typeprint.c (#include "command.h"): Removed.
6097 (#include "gdbcmd.h"): Removed.
6098 * corefile.c (#include "frame.h"): Removed
6099 (#include "symfile.h"): Removed.
6100 (#include "language.h"): Removed.
6101 * dbxread.c (#include "command.h"): Removed.
6102 * environ.c (#include "gdbcore.h"): Removed.
6103 * event-loop.c (#include "top.h"): Removed.
6104 * f-typeprint.c (#include "command.h"): Removed.
6105 (#include "gdbcmd.h"): Removed.
6106 (#include "language.h"): Removed.
6107 (#include "typeprint.h"): Removed.
6108 (#include "frame.h"): Removed.
6109 * gdbtypes.h (print_type_scalar): Removed declaration.
6110 * infcmd.c (#include "completer.h"): Removed.
6111 * language.c (#include "frame.h"): Removed.
6112 * m2-typeprint.c (#include "command.h"): Removed.
6113 (#include "gdbcmd.h"): Removed.
6114 (#include "language.h"): Removed.
6115 * m2-valprint.c (#include "valprint.h"): Removed.
6116 * p-typeprint.c (#include "command.h"): Removed.
6117 (#include "gdbcmd.h"): Removed.
6118 * p-valprint.c (#include "typeprint.h"): Removed.
6119 * parse.c (#include "linespec.h"): Removed.
6120 * regcache.c (#include "frame.h"): Removed.
6121 * remote.c (#include "frame.h"): Removed.
6122 (getpkt_sane): Make static.
6123 * source.c (#include "completer.h"): Removed.
6124 * stack.c (#include "symfile.h"): Removed.
6125 (#include "objfiles.h"): Removed.
6126 * symfile.c (#include "completer.h"): Removed.
6127 * tracepoint.c (#include "completer.h"): Removed.
6128 * values.c (#include "frame.h"): Removed.
6129 * varobj.c (#include "valprint.h"): Removed.
6130 * wrapper.c (#include "frame.h"): Removed.
6132 * memattr.c (create_mem_region): Removed unused variable.
6133 * remote-nrom.c: Removed spurious semicolon after init_nrom_ops.
6137 * remote-rdp.c (rdp_set_command_line): Add missing double quote.
6141 * solib-aix5.c (build_so_lib_from_mapfile): Use xfree() instead
6146 * TODO (Cleanups): Remove the item about converting docs to GFDL.
6150 * ia64-tdep.c (slotN_contents, replace_slotN_contents): Change
6151 type of ``bundle'' from unsigned char * to char *.
6152 (ia64_get_saved_register): Use alloca() to allocate register
6155 * solib-aix5.c (build_so_lib_from_mapfile): Fix xasprintf() usage.
6159 * proc-utils.h (procfs_ctl_t): New typedef.
6160 * proc-api.c (write_with_trace): Change type of ``opcode'' from
6161 long to procfs_ctl_t. Don't assume that the target has defined
6162 BREAKPOINT. Handle case in which PCRESET is the same as PCUNSET.
6163 * proc-events.c (sys/syscall.h, sys/fault.h): Include conditionally.
6164 * procfs.c (sys/fault.h, sys/syscall.h): Include conditionally.
6165 (gdb_sigset_t, gdb_sigaction_t, gdb_siginfo_t, gdb_premptysysset)
6166 (gdb_praddsysset, gdb_prdelsysset, gdb_pr_issyssetmember):
6167 Conditionally define as appropriate for AIX/non-AIX systems. Use
6168 these defines/typedefs as appropriate elsewhere in file.
6169 (struct procinfo): Change type of saved_sigset and saved_sighold
6170 from sigset_t to gdb_sigset_t. Make saved_exitset and
6171 saved_entryset pointer variables. Add two new fields, num_syscalls
6173 (DYNAMIC_SYSCALLS): Define when HAVE_PRSYSENT_T is defined.
6174 (sysset_t_size, sysset_t_alloc): New functions.
6175 (load_syscalls, free_syscalls, find_syscall): New functions for
6176 platforms which define DYNAMIC_SYSCALLS.
6177 (create_procinfo): Call load_syscalls.
6178 (destroy_one_procinfo): Call free_syscalls.
6179 (GDBRESET): Don't define twice.
6180 (proc_modify_flag): Change type of operation code array `arg'
6181 from long to procfs_ctl_t.
6182 (proc_stop_process, proc_wait_for_stop, proc_run_process)
6183 (proc_set_traced_signals, proc_set_traced_faults)
6184 (proc_set_traced_sysentry, proc_set_traced_sysexit)
6185 (proc_set_held_signals, proc_clear_current_fault)
6186 (proc_set_current_signal, proc_clear_current_signal, proc_set_gregs)
6187 (proc_set_fpregs, proc_kill, proc_set_watchpoint): Likewise for `cmd'.
6188 (proc_set_traced_sysentry): Dynamically allocate variable sized
6189 struct gdb_proc_ctl_pcsentry. Also, free it at function exit.
6190 (proc_set_traced_sysexit): Dynamically allocate variable
6191 sized struct gdb_proc_ctl_pcsexit. Also, free it at
6193 (proc_get_traced_sysentry, proc_get_traced_sysexit): Add new code
6194 for reading the sysset_t struct on AIX5.
6195 (procfs_debug_inferior): Don't assume that SYS_exit will be
6196 defined. Add new code for finding certain syscalls on AIX5.
6197 (syscall_is_lwp_exit, syscall_is_exit, syscall_is_exec)
6198 (syscall_is_lwp_create): New functions.
6199 (procfs_wait): Restructured code which checks for certain
6200 system calls to use the new syscall_is_... functions.
6201 (procfs_notice_signals): Account for the fact that saved_entryset
6202 and saved_exitset in struct procinfo are now pointers.
6206 * symtab.c (find_pc_sect_line): Revise method used for finding
6211 * i386-linux-tdep.c (i386_linux_sigtramp_saved_pc,
6212 i386_linux_sigtramp_saved_sp): Make static.
6213 (i386_linux_frame_saved_pc): New function based on the old
6214 FRAME_SAVED_PC macro, but use read_memory_unsigned_integer instead
6215 of read_memory_integer.
6216 * config/i386/tm-linux.h (sigtramp_saved_pc): Remove definition.
6217 (i386_linux_sigtramp_saved_pc): Remove prototype.
6218 (FRAME_SAVED_PC): Redefine in terms of i386_linux_frame_saved_pc.
6219 (i386_linux_frame_saved_pc): New prototype.
6223 * MAINTAINERS: Document m88k as a ``Known problem in 5.1''.
6224 * TODO (GDB 5.1 - Cleanups): Update.
6228 * fork-child.c (clone_and_follow_inferior): Delete #ifdef
6233 * config/i386/tm-symmetry.h (PUSH_ARGUMENTS): #undef.
6235 * i386-tdep.c (i386_push_arguments, i386_store_struct_return): New
6237 * config/i386/tm-i386.h (PUSH_ARGUMENTS): New macro.
6238 (STORE_STRUCT_RETURN): Redefine in terms of
6239 i386_store_struct_return.
6240 (i386_push_arguments, i386_store_struct_return): New prototypes.
6241 * config/i386/tm-i386v.h (STORE_STRUCT_RETURN): Remove. It's
6242 definition was identical to the definition in "i386/tm-i386.h" so
6243 the new definition should suffice too.
6247 * event-loop.c (toplevel) [!HAVE_POLL] [NO_FD_SET]: Remove unused
6248 definitions for SELECT, NBBY, FD_SETSIZE, NFDBITS, and MASK_SIZE.
6250 * config/djgpp/djconfig.sh: Add copyright notice.
6252 * ser-go32.c (rawclock): Remove prototype; include time.h instead.
6253 (ISR, dos_hookirq, isr_t): Convert K&R definition to ANSI C.
6254 (top level) <string.h>: Include gdb_string.h instead.
6255 (dos_noop, dos_raw, dos_noflush_set_tty_state)
6256 (dos_print_tty_state, dos_info): Remove ATTRIBUTE_UNUSED.
6258 * go32-nat.c (go32_create_inferior): Move the declaration of
6259 `environ' to here from the top level.
6260 (top level) <_initialize_go32_nat>: Remove redundant prototype.
6261 <gdb_string.h>: Include it instead of string.h.
6262 (store_register): Call register_buffer instead of accessing
6263 registers[] directly.
6264 (redir_cmdline_delete, redir_cmdline_parse, redir_to_debugger)
6265 (redir_to_debugger, redir_debug_init) [__DJGPP_MINOR__ < 3]: Put
6266 the function names at the start of the line.
6267 (go32_set_dr): Throw internal_error if the argument is not a valid
6268 debug register number.
6269 (go32_open, go32_close, go32_attach, go32_detach, go32_resume)
6270 (go32_wait, go32_xfer_memory, go32_files_info)
6271 (go32_terminal_info): Remove ATTRIBUTE_UNUSED.
6275 * mips-tdep.c (mips_gdbarch_init): Tweak indentation.
6281 * coffread.c: Include "gdb_assert.h".
6282 (coff_symtab_read): Cast the integer s_sclass to a long before
6283 casting it to a pointer.
6289 * coffread.c (coff_symtab_read): Initialize
6290 ``fcn_first_line_addr''. Check that the ``.bf'' always preceeds
6292 * dbxread.c (find_text_range): Initialize ``start'' and ``end''.
6296 * config/sparc/tm-sp64.h (GDB_MULTI_ARCH): Down grade to
6297 GDB_MULTI_ARCH_PARTIAL from two. SOFTWARE_SINGLE_STEP is not
6300 * gdbarch.sh (SOFTWARE_SINGLE_STEP): Add.
6301 * gdbarch.h, gdbarch.c: Re-generate.
6303 * target.h (SOFTWARE_SINGLE_STEP_P)
6304 (SOFTWARE_SINGLE_STEP): Delete macro definitions.
6308 * gdbarch.sh (gdbarch_register_read, gdbarch_register_write): Add.
6309 * gdbarch.h, gdbarch.c: Regenerate.
6311 * regcache.h (regcache_read, regcache_write): Declare.
6312 (registers, register_valid, register_buffer): Add note that these
6313 interfaces are deprecated.
6315 * regcache.c: Include "gdb_assert.h".
6316 (legacy_write_register_gen): Rename write_register_gen.
6317 (legacy_read_register_gen): Rename read_register_gen.
6318 (regcache_read, regcache_write): New function.
6319 (read_register_gen, write_register_gen): New function.
6320 (write_register): Simplify. Use write_register_gen.
6321 (read_register): Ditto using read_register_gen.
6322 (read_signed_register): Ditto.
6323 (read_register_bytes): Ditto!!!!
6324 (supply_register): Add note that CLEANUP_REGISTER_VALUE is being
6325 replaced by gdbarch_register_read.
6327 * TODO (GDB 5.2 - Cleanups): Add list of gdbarch methods to
6332 Fix from Dan Berlin:
6334 * stabsread.c (read_cpp_abbrev): Properly construct the names of
6335 virtual function table pointer fields.
6339 * defs.h (xfree, mcalloc, mmalloc, mrealloc, mfree, xmmalloc,
6340 xmrealloc): Move existing declarations to the one place and
6341 re-order to be consistent.
6342 (xmcalloc, xmfree): Declare.
6343 (xmmalloc, xmrealoc): Assume ISO-C - use size_t and void* in
6346 * utils.c (size_t): Delete #ifdef defining size_t.
6347 (mmalloc, mrealloc, mcalloc, mfree): Re-order.
6348 (mmalloc, mrealloc, mcalloc): Document as only calls in GDB
6349 corresponding malloc, realloc, calloc.
6350 (mfree): Call free directly.
6351 (xmmalloc, xmrealloc): Clean up. Assume ISO-C.
6352 (xmcalloc, xmfree): New functions. Copy old xcalloc and xfree
6353 function bodies to here.
6354 (xcalloc, xfree): Call xmcalloc and xmfree respectfully.
6358 * fork-child.c (fork_inferior): Make ``argv'', ``exec_file'' and
6359 ``shell_file'' static locals.
6361 * jv-lang.c (java_link_class_type): Initialize ``field'' and
6364 * jv-valprint.c (java_value_print): Initialize ``next_element''.
6368 * config/i386/nm-i386.h: Fix formatting and change reference to
6369 i386-tdep.c to i386-nat.c.
6373 * configure.in: Corrected spelling errors.
6374 * configure: Regenerated.
6378 * TODO (GDB 5.1 - Cleanups): Add more targets to obsolete.
6382 * Makefile.in (NTSSTART): Delete.
6384 (kdb): Delete target.
6385 * kdb-start.c, stuff.c: Mark as obsolete.
6390 * config/pa/xm-hppah.h (HPPA_COMPILER_BUG): Delete. GDB only
6391 compiles using an ISO-C compiler.
6392 (MALLOC_INCOMPATIBLE): Ditto.
6393 * linespec.c (decode_line_1): Delete hack to work around
6398 * exec.c (xfer_memory): Always initialize section.
6399 * infrun.c (normal_stop): Always initialize source_flag.
6403 * TODO (Remote Protocol Support): Review. Add notes about ``!'',
6404 non-use of a continue address and typical use of ``q'' packet.
6408 Make DJGPP use the new unified support for hardware
6409 breakpoints and watchpoints on x86 targets:
6411 * config/i386/nm-go32.h <top level>: Don't include nm-i386v.h,
6412 include nm-i386.h instead.
6413 (TARGET_HAS_HARDWARE_WATCHPOINTS, HAVE_CONTINUABLE_WATCHPOINT)
6414 (TARGET_CAN_USE_HARDWARE_WATCHPOINT, STOPPED_BY_WATCHPOINT)
6415 (TARGET_REGION_OK_FOR_HW_WATCHPOINT, DECR_PC_AFTER_HW_BREAK)
6416 (target_stopped_data_address, target_insert_watchpoint)
6417 (target_remove_watchpoint, target_insert_hw_breakpoint)
6418 (target_remove_hw_breakpoint): Don't define.
6419 (I386_USE_GENERIC_WATCHPOINTS, I386_DR_LOW_SET_CONTROL)
6420 (I386_DR_LOW_SET_ADDR, I386_DR_LOW_RESET_ADDR)
6421 (I386_DR_LOW_GET_STATUS): Define to call appropriate go32_*
6422 functions from go32-nat.c.
6424 * config/i386/go32.mh (NATDEPFILES): Add i386-nat.o.
6426 * go32-nat.c <top level>: Remove prototypes for watchpoint-
6427 related functions. Remove definitions of watchpoint-related
6429 (go32_mourn_inferior): Call i386_cleanup_dregs instead of the
6430 private cleanup_dregs function.
6431 (cleanup_dregs, go32_insert_watchpoint)
6432 (go32_insert_aligned_watchpoint, go32_handle_nonaligned_watchpoint)
6433 (go32_remove_watchpoint, go32_remove_aligned_watchpoint)
6434 (go32_region_ok_for_watchpoint, go32_stopped_by_watchpoint)
6435 (go32_remove_hw_breakpoint, go32_insert_hw_breakpoint): Remove.
6436 (go32_set_dr, go32_set_dr7, go32_get_dr6): New functions.
6440 * ia64-tdep.c (fetch_instruction): Warn about slot numbers greater
6441 than two instead of generating an error.
6445 * cp-valprint.c: Reformat to bring into line with GNU coding
6450 Make Linux use the new unified support for hardware breakpoints
6451 and watchpoints on x86 targets.
6452 * i386-linux-nat.c: Doc fixes. Include "gdb_assert.h".
6453 [HAVE_SYS_DEBUGREG_H]: Include <sys/debugreg.h>.
6454 (DR_FIRSTADDR, DR_LASTADDR, DR_STATUS, DR_CONTROL): Define to
6455 appropriate value if not already defined.
6456 (register_u_addr): New function.
6457 (kernel_u_size): New function.
6458 (i386_linux_dr_get, i386_linux_dr_set): New functions.
6459 (i386_linux_dr_set_control, i386_linux_dr_set_addr,
6460 i386_linux_reset_addr, i386_linux_dr_get_status): New functions.
6461 * config/i386/nm-linux.h: Don't include "nm-i386v.h".
6462 (I386_USE_GENERIC_WATCHPOINTS): Define and include "nm-i386.h".
6463 (TARGET_HAS_HARDWARE_WATCHPOINTS,
6464 TARGET_CAN_USE_HARDWARE_WATCHPOINTS, HAVE_CONTINUABLE_WATCHPOINT,
6465 STOPPED_BY_WATCHPOINT, target_insert_watchpoint,
6466 target_remove_watchpoint): Remove macros.
6467 (i386_stopped_by_watchpoint, i386_insert_watchpoint,
6468 i386_remove_watchpoint): Remove prototypes.
6469 (register_u_addr): New prototype.
6470 (REGISTER_U_ADDR): Define in terms of register_u_addr.
6471 (i386_linux_dr_set_control, i386_linux_dr_set_addr,
6472 i386_linux_reset_addr, i386_linux_dr_get_status): New prototypes.
6473 (I386_DR_LOW_SET_CONTROL, I386_DR_LOW_SET_ADDR,
6474 I386_DR_LOW_RESET_ADDR, I386_DR_LOW_GET_STATUS): New macros.
6475 * config/i386/linux.mh (NATDEPFILES): Replace i386v-nat.o with
6480 Fix from Dan Berlin:
6482 * linespec.c (find_methods): Whitespace differences aren't
6483 significant in *un*mangled method names. Use strcmp_iw to compare
6488 * gdbarch.sh: Allow a non- multi-arch target to override a
6490 * gdbarch.h: Regenerate.
6494 * gdbarch.sh: Avoid use of ``!''.
6498 * target.h (enum target_signal): Move definition from here.
6499 * defs.h (enum target_signal): To here.
6501 * config/arc/tm-arc.h (arc_software_single_step): Change type of
6502 first parameter to enum target_signal.
6503 * config/rs6000/tm-rs6000.h (rs6000_software_single_step): Ditto.
6504 * config/sparc/tm-sparc.h (sparc_software_single_step): Ditto.
6505 * rs6000-tdep.c (rs6000_software_single_step): Update.
6509 * frame.h (SIZEOF_FRAME_SAVED_REGS): Report an error if macro
6513 * stabsread.c (define_symbol): A parameter ('R'), a local ('r'),
6514 or a reference ('a') can be in a pseudo register.
6515 * infcmd.c (do_registers_info): Must take into account the pseudo
6516 registers to print their value.
6517 (registers_info): Likewise.
6518 * stack.c (frame_info): Likewise.
6519 * frame.h (SIZEOF_FRAME_SAVED_REGS): Save the pseudo registers.
6523 Unified support for hardware breakpoints and watchpoints on
6526 * config/i386/nm-i386.h: New file.
6528 * config/i386/nm-i386.h: (i386_cleanup_dregs)
6529 (i386_insert_watchpoint, i386_remove_watchpoint)
6530 (i386_region_ok_for_watchpoint, i386_stopped_by_hwbp)
6531 (i386_stopped_data_address, i386_insert_hw_breakpoint)
6532 (i386_remove_hw_breakpoint): Declare prototypes.
6533 [I386_USE_GENERIC_WATCHPOINTS] (TARGET_CAN_USE_HARDWARE_WATCHPOINT):
6534 Define if not already defined.
6535 (TARGET_REGION_OK_FOR_HW_WATCHPOINT, HAVE_CONTINUABLE_WATCHPOINT)
6536 (STOPPED_BY_WATCHPOINT, target_stopped_data_address)
6537 (target_insert_watchpoint, target_remove_watchpoint)
6538 (target_insert_hw_breakpoint, target_remove_hw_breakpoint): Define
6539 to call the appropriate i386_* functions.
6541 * i386-nat.c: New file.
6543 * i386-nat.c (I386_DR_CONTROL_MASK, I386_DR_LOCAL_ENABLE)
6544 (I386_DR_GLOBAL_ENABLE, I386_DR_DISABLE, I386_DR_SET_RW_LEN)
6545 (I386_DR_GET_RW_LEN, I386_DR_WATCH_HIT): New macros.
6546 (dr_mirror, dr_status_mirror, dr_control_mirror, dr_ref_count)
6547 (maint_show_dr): New variables.
6548 (i386_cleanup_dregs, i386_show_dr, i386_length_and_rw_bits)
6549 (i386_insert_aligned_watchpoint, i386_remove_aligned_watchpoint)
6550 (i386_handle_nonaligned_watchpoint, i386_insert_watchpoint)
6551 (i386_remove_watchpoint, i386_region_ok_for_watchpoint)
6552 (i386_stopped_data_address, i386_stopped_by_hwbp)
6553 (i386_insert_hw_breakpoint, i386_remove_hw_breakpoint): New
6555 (_initialize_i386_nat): New function.
6556 [I386_USE_GENERIC_WATCHPOINTS]: Add new maint command
6557 `show-debug-regs', sets maint_show_dr to non-zero value and
6558 activates debugging print-outs in functions which insert, remove,
6559 and test watchpoints and hardware breakpoints.
6561 * Makefile.in (i386-nat.o): New target.
6562 (ALLDEPFILES): Add i386-nat.o.
6566 * i386-tdep.c: Add back _initialize_i386_tdep prototype with
6567 appropriate comment.
6571 * config/alpha/alpha-linux.mh (NATDEPFILES): Use proc-service.o,
6572 thread-db.o, and lin-lwp.o for thread support instead of
6573 linux-thread.o and lin-thread.o.
6574 * config/alpha/nm-linux.h (PREPARE_TO_PROCEED, GET_THREAD_SIGNALS)
6575 (ATTACH_LWP): Define to use the following lin-lwp.c functions...
6576 (lin_lwp_prepare_to_proceed, lin_thread_get_thread_signals)
6577 (lin_lwp_attach_lwp): Declare.
6581 Fix from Dan Berlin:
6583 * Makefile.in: Clean up dependencies on ../include/demangle.h.
6584 (demangle_h): New variable.
6585 (jv-typeprint.o, jv-valprint.o, linespec.o): Use it.
6589 * target.h (SOFTWARE_SINGLE_STEP_P): Add empty parameter list.
6590 * breakpoint.c (bpstat_stop_status): Update.
6591 * infrun.c (handle_inferior_event): Ditto.
6592 * mips-tdep.c (mips_dump_tdep): Ditto.
6593 * infrun.c (resume): Ditto.
6594 * infptrace.c (child_resume): Ditto.
6595 * config/mips/tm-wince.h (SOFTWARE_SINGLE_STEP_P): Ditto.
6596 * config/sh/tm-wince.h (SOFTWARE_SINGLE_STEP_P): Ditto.
6597 * config/sparc/tm-sparc.h (SOFTWARE_SINGLE_STEP_P): Ditto.
6598 * config/powerpc/tm-linux.h (SOFTWARE_SINGLE_STEP_P): Ditto.
6599 * config/arm/tm-wince.h (SOFTWARE_SINGLE_STEP_P): Ditto.
6600 * config/arc/tm-arc.h (SOFTWARE_SINGLE_STEP_P): Ditto.
6601 * config/powerpc/tm-ppc-eabi.h (SOFTWARE_SINGLE_STEP_P): Ditto.
6605 * config/powerpc/tm-linux.h (SOFTWARE_SINGLE_STEP): Replace abort
6606 with internal_error.
6610 Fix from Dan Berlin:
6612 * linespec.c (find_methods): Just call CHECK_TYPEDEF on t, rather
6613 than asking for sym_class's type; that's circuitous. Remove
6614 sym_class, since the last use of it is gone.
6618 * breakpoint.c (print_it_typical) <bp_access_watchpoint> [UI_OUT]:
6619 Correct the order of calls to ui_out_field_string and
6620 ui_out_list_begin when bs->old_val is NULL.
6624 * configure.in (AC_CHECK_HEADERS): Check for existence of nlist.h.
6625 * configure: Regenerate.
6626 * config.in: Regenerate.
6627 * solib-legacy.c (nlist.h): Include if HAVE_NLIST_H is defined.
6631 * config/i386/i386v42mp.mh (NATDEPFILES): List all files on
6632 same line to avoid problems with Unixware 7's make when building
6637 * defs.h (malloc): Move declaration from here.
6638 * utils.c (malloc): To here.
6639 * config/pa/xm-hppah.h (malloc): Delete declaration.
6641 * gnu-nat.c (make_proc): Use xmalloc instead of malloc.
6642 * hp-psymtab-read.c (hpread_call_pxdb): Ditto.
6643 (hpread_quick_traverse): Ditto.
6644 * infttrace.c (create_thread_info): Ditto.
6645 (kill_inferior): Ditto.
6646 * gnu-nat.c (make_inf): Ditto, and don't check return value.
6647 * procfs.c (proc_update_threads): Ditto.
6648 * valprint.c (print_decimal_chars): Ditto.
6649 * gdbtypes.c (cfront_mangle_name): Use xasprintf instead of
6651 * remote-rdp.c (rdp_set_command_line): Ditto.
6655 * defs.h (realloc): Move declaration from here.
6656 * utils.c (realloc): To here.
6657 * config/pa/xm-hppah.h (realloc): Delete declaration.
6658 * lin-thread.c (insert_thread): Use xrealloc instead of realloc.
6659 * symfile.c (add_filename_language): Ditto.
6660 * event-loop.c (create_file_handler): Ditto.
6664 * defs.h (free): Move declaration from here.
6665 * utils.c (free): To here.
6666 (xfree): Document as the only call to free().
6667 * config/pa/xm-hppah.h (free): Delete declaration.
6671 * config/ia64/linux.mh (NATDEPFILES): Add proc-service.o to
6676 * eval.c (evaluate_subexp): Remove #ifdef __STDC__ and ``inline''.
6677 * config/mips/xm-mips.h (offsetof): Define when !GNUC not !STDC.
6678 * cli/cli-cmds.c (init_cli_cmds): Remove #ifdef __STDC__
6682 * TODO: List known problems with TUI.
6686 * MAINTAINERS: Jimmy Guo stepped down as a maintiner (TUI,
6691 * remote.c (remote_cisco_section_offsets): Do not cast result from
6692 bfd_get_section_name.
6693 (compare_sections_command): Ditto.
6694 (remote_cisco_section_offsets): Make ``p'' a const pointer.
6695 (compare_sections_command): Ditto for ``sectname''.
6700 * valops.c (hand_function_call): Simplify computation of the
6701 address of the pushed argument.
6705 * p-exp.y (parse_number): Avoid shift overflow when ``long''.
6706 Code copied from c-exp.y.
6710 * acconfig.h (HAVE_STRUCT_LINK_MAP_WITH_L_MEMBERS)
6711 (HAVE_STRUCT_LINK_MAP_WITH_LM_MEMBERS)
6712 (HAVE_STRUCT_SO_MAP_WITH_SOM_MEMBERS): New configure macros.
6713 * configure.in (HAVE_STRUCT_LINK_MAP32): Move this test out
6714 of the Solaris procfs testing section. Instead, group with...
6715 (HAVE_STRUCT_LINK_MAP_WITH_L_MEMBERS)
6716 (HAVE_STRUCT_LINK_MAP_WITH_LM_MEMBERS)
6717 (HAVE_STRUCT_SO_MAP_WITH_SOM_MEMBERS): New <link.h> tests.
6718 * configure: Regenerate.
6719 * config.in: Regenerate.
6721 * solib-legacy.c (legacy_svr4_fetch_link_map_offsets): Use
6722 new configure macros to choose which (if any) code to
6723 compile in. Added code to explicitly handle *BSD systems;
6724 these systems were previously handled only through macro
6725 redefinition. Also, due to the way the autoconf tests are set
6726 up, this function will no longer return a non-zero value when
6727 GDB is configured as a cross debugger. I.e, cross debuggers
6728 will no longer be able to "accidentally" get the host system's
6733 * config/i386/nbsd.mh (NATDEPFILES): List all files on the same
6734 line to avoid build problem on NetBSD 1.4.
6738 * win32-nat.c (child_attach): check args for NULL before passing
6739 to strtoul. This fixes PR gdb/43.
6743 * i387-nat.h: Doc Fix.
6745 * i386-tdep.c: Fix formatting.
6746 (i386_get_frame_setup, i386_follow_jump, codestream_read,
6747 codestream_seek, codestream_fill, skip_trampoline_code,
6748 gdb_print_insn_i386, _initialize_i386_tdep): Remove redundant
6753 * config/i386/tm-linux.h (TARGET_ANALYZE_FLOATING): Remove. It's
6754 no longer used. Also remove associated FIXME.
6758 * gdbarch.sh: Add classes ``m'' and ``M'' for pure multi-arch. Do
6759 not generate macro wrappers for multi-arch functions or
6761 (class_is_info_p, class_is_predicate_p): Update.
6762 (class_is_function_p, class_is_variable_p): Ditto.
6763 (class_is_multiarch_p): New class function.
6767 * config/h8300/tm-h8300.h (FRAME_ARGS_ADDRESS): Changed to use
6768 h8300_frame_args_address from frame_args_address.
6769 (FRAME_LOCALS_ADDRESS): Changed to use h8300_frame_locals_address
6770 from frame_locals_address.
6771 (PRINT_REGISTER_HOOK): Changed to use h8300_print_register_hook
6772 from print_register_hook.
6773 (h8300_frame_args_address): Declare.
6774 (h8300_frame_find_saved_regs): Declare.
6775 (h8300_frame_locals_address): Declare.
6776 (h8300_frame_saved_pc): Declare.
6777 (h8300_pop_frame): Declare.
6778 (h8300_print_register_hook): Declare.
6779 * h8300-tdep.c (h8300_frame_find_saved_regs): Removed declaration.
6780 (h8300_frame_args_address): Renamed from frame_args_address.
6781 (h8300_frame_locals_address): Renamed from frame_locals_address.
6782 (h8300_pop_frame): Renamed from pop_frame.
6783 (h8300_print_register_hook): Renamed from print_register_hook.
6787 * solib-svr4.c (bfd_lookup_symbol): Change type of
6788 ``storage_needed'' from unsigned int to long in order to
6789 match return type of bfd_get_symtab_upper_bound() and
6790 bfd_get_dynamic_symtab_upper_bound().
6791 * solib-aix5.c (bfd_lookup_symbol): Likewise. Also, eliminate
6792 REASONABLE_LIMIT hack which had been added to work around this
6797 * solib-aix5.c (bfd_lookup_symbol, build_so_list_from_mapfile)
6798 (aix5_relocate_main_executable, aix5_clear_solib): Replace calls
6799 to free() with calls to xfree().
6800 (bfd_lookup_symbol): Eliminate use of PTR.
6801 (build_so_list_from_mapfile): Use xasprintf() instead of sprintf().
6805 * linespec.c (decode_line_1): Remove trailing quote
6806 when parsing double quotes.
6810 * uw-thread.c (read_thr_debug, read_map, read_lwp, thread_iter)
6811 (libthread_stub, libthread_init): Pass NULL for the mem_attrib
6812 argument in the to_xfer_memory calls.
6816 * MAINTAINERS: Fix typo - w65 not w64. Still doesn't build.
6817 * TODO (GDB 5.1 - Cleanups): Add status of targets being obsoleted.
6821 * wince.c (child_xfer_memory): Add attrib parameter.
6822 * symm-nat.c (child_xfer_memory): Ditto.
6823 * mac-nat.c (child_xfer_memory): Ditto.
6824 * infttrace.c (child_xfer_memory): Ditto.
6825 * procfs.c (procfs_xfer_memory): Ditto.
6826 * lin-thread.c (thread_db_xfer_memory): Ditto.
6827 * gnu-nat.c (gnu_xfer_memory): Ditto.
6831 * NEWS: Mention that Harris/CXUX m88k is obsolete.
6835 * config/mips/tm-mips.h: Include "regcache.h" for macros refering
6836 to regcache functions.
6837 * config/m68k/tm-m68k.h: Ditto.
6838 * config/i386/tm-i386v.h: Ditto.
6839 * config/mcore/tm-mcore.h: Ditto.
6840 * config/m88k/tm-m88k.h: Ditto.
6841 * config/m68k/tm-news.h: Ditto.
6842 * config/m68k/tm-linux.h: Ditto.
6843 * config/m68k/tm-delta68.h: Ditto.
6844 * config/m68k/nm-sun3.h: Ditto.
6845 * config/m32r/tm-m32r.h: Ditto.
6846 * config/i386/tm-symmetry.h: Ditto.
6847 * config/i386/tm-sun386.h: Ditto.
6848 * config/i386/tm-i386.h: Ditto.
6849 * config/i386/nm-symmetry.h: Ditto.
6850 * config/i386/nm-sun386.h: Ditto.
6851 * config/i386/nm-ptx4.h: Ditto.
6852 * config/i386/nm-i386mach.h: Ditto.
6853 * config/h8500/tm-h8500.h: Ditto.
6854 * config/h8300/tm-h8300.h: Ditto.
6855 * config/fr30/tm-fr30.h: Ditto.
6856 * config/d30v/tm-d30v.h: Ditto.
6857 * config/arm/tm-arm.h: Ditto.
6858 * config/arc/tm-arc.h: Ditto.
6859 * config/alpha/tm-alpha.h: Ditto.
6860 * config/a29k/tm-vx29k.h: Ditto.
6861 * config/a29k/tm-a29k.h: Ditto.
6862 * config/w65/tm-w65.h: Ditto.
6863 * config/vax/tm-vax.h: Ditto.
6864 * config/v850/tm-v850.h: Ditto.
6865 * config/tic80/tm-tic80.h: Ditto.
6866 * config/sparc/tm-sparclite.h: Ditto.
6867 * config/sparc/tm-sparclet.h: Ditto.
6868 * config/sparc/tm-sparc.h: Ditto.
6869 * config/sparc/nm-sun4sol2.h: Ditto.
6870 * config/sparc/nm-sun4os4.h: Ditto.
6871 * config/sparc/nm-nbsd.h: Ditto.
6872 * config/powerpc/nm-solaris.h: Ditto.
6873 * config/pa/tm-hppao.h: Ditto.
6874 * config/pa/tm-hppa.h: Ditto.
6875 * config/pa/nm-hppab.h: Ditto.
6876 * config/ns32k/tm-umax.h: Ditto.
6877 * config/ns32k/tm-merlin.h: Ditto.
6878 * config/nm-m3.h: Ditto.
6879 * config/nm-gnu.h: Ditto.
6883 * MAINTAINERS: Update list of targets. Mark arm-* and v850-elf as
6884 broken. Mark sh-*, ia64-linux and ns32k-netbsd as buildable.
6885 Specify an m88k target. Include sample GAWK script to generate
6886 target list. Delete non-existant romp target.
6887 * TODO (GDB 5.1 - Cleanups): Update.
6891 * linespec.c (decode_line_1): Skip argptr over a leading
6892 double quote. Prevents alloc of 0 bytes and memcpy of -1 bytes.
6896 * config/djgpp/fnchange.lst (ia64-aix-nat.c): Add entry.
6900 * ui-out.h: Remove #if __STDC__, assume an ISO-C compiler.
6903 * printcmd.c (printf_command): Ditto.
6904 * ch-exp.c (match_integer_literal): Ditto.
6905 * scm-tags.h: Ditto.
6906 * ser-go32.c: Ditto.
6907 * hppa-tdep.c (unwind_command): Ditto.
6908 * defs.h (volatile): Delete macro definition. Assume __STDC__.
6909 * remote-adapt.c (volatile): Ditto.
6910 * remote-eb.c (volatile): Ditto.
6911 * remote-mm.c (volatile): Ditto.
6912 * defs.h (alloca): Assume __STDC__, declare returning void *.
6916 * inferior.h (ARCH_NUM_REGS): Delete definition.
6917 * stack.c (frame_info): Use NUM_REGS, not ARCH_NUM_REGS.
6918 * regcache.c (registers_changed): Ditto.
6919 (registers_fetched): Ditto.
6920 * infptrace.c (fetch_inferior_registers): Ditto.
6921 (store_inferior_registers): Ditto.
6922 * infcmd.c (do_registers_info): Ditto.
6923 (registers_info): Ditto.
6924 * i386-linux-nat.c (old_fetch_inferior_registers): Ditto.
6925 (old_store_inferior_registers): Ditto.
6926 * gdbserver/low-linux.c (register_addr): Ditto.
6927 * gdbserver/low-hppabsd.c (register_addr): Ditto.
6928 * core-aout.c: Don't include "inferior.h".
6929 (fetch_core_registers): Use NUM_REGS not ARCH_NUM_REGS.
6930 (register_addr): Ditto.
6935 * cli/cli-script.c (define_command): Fix setting of post hooks.
6939 * i386-linux-tdep.c: Fix formatting and clarify comments.
6940 (i386_linux_svr4_fetch_link_map_offsets): Use NULL instead of 0
6945 * gnu-nat.c: Include "gdb_assert.h" instead of <assert.h>.
6946 (proc_update_sc): Use gdb_assert instead of assert.
6947 (proc_abort): Ditto.
6948 (inf_set_step_thread): Ditto.
6950 (S_exception_raise_request): Ditto.
6951 (gnu_terminal_init_inferior): Ditto.
6955 * Makefile.in (solib-svr4.o): Depend on solib-svr4.c, not solib.c.
6956 (solib-legacy.o): New makefile target.
6957 * solib-legacy.c: New file.
6958 * solib-svr4.h (SVR4_FETCH_LINK_MAP_OFFSETS): Delete.
6959 (default_svr4_fetch_link_map_offsets): Delete.
6960 (set_solib_svr4_fetch_link_map_offsets): Declare.
6961 (legacy_svr4_fetch_link_map_offsets_hook): Declare.
6962 * solib-svr4.c (elf/common.h): Include.
6963 (link.h): Only include for SunOS shared library support.
6964 (_SYSCALL32): Don't define.
6965 (SVR4_FETCH_LINK_MAP_OFFSETS): Define.
6966 (default_svr4_fetch_link_map_offsets): Made static; added forward
6968 (fetch_link_map_offsets): New static global.
6969 (legacy_svr4_fetch_link_map_offsets_hook): New global variable.
6970 (default_svr4_fetch_link_map_offsets): Rewritten. The guts
6971 of what used to be in this function now reside in
6972 legacy_svr4_fetch_link_map_offsets() in solib-legacy.c.
6973 (open_symbol_file_object): Fix declaration in SunOS section
6975 (set_solib_svr4_fetch_link_map_offsets): New extern function.
6976 (init_fetch_link_map_offsets): New static function.
6977 (_initialize_svr4_solib): Put static global fetch_link_map_offsets
6978 under multiarch control.
6980 * config/alpha/alpha-linux.mt (TDEPFILES): Add solib-legacy.o to
6982 * config/alpha/fbsd.mh (NATDEPFILES): Likewise.
6983 * config/arm/linux.mt (TDEPFILES): Likewise.
6984 * config/i386/fbsd.mh (NATDEPFILES): Likewise.
6985 * config/i386/i386dgux.mh (NATDEPFILES): Likewise.
6986 * config/i386/i386gnu.mh (NATDEPFILES): Likewise.
6987 * config/i386/i386sco5.mh (NATDEPFILES): Likewise.
6988 * config/i386/i386sol2.mt (TDEPFILES): Likewise.
6989 * config/i386/i386v4.mh (NATDEPFILES): Likewise.
6990 * config/i386/i386v42mp.mh (NATDEPFILES): Likewise.
6991 * config/i386/linux.mt (TDEPFILES): Likewise.
6992 * config/i386/nbsd.mh (NATDEPFILES): Likewise.
6993 * config/i386/nbsdelf.mh (NATDEPFILES): Likewise.
6994 * config/i386/ncr3000.mt (TDEPFILES): Likewise.
6995 * config/i386/ptx4.mh (XDEPFILES): Likewise.
6996 * config/i386/sun386.mt (TDEPFILES): Likewise.
6997 * config/ia64/linux.mt (TDEPFILES): Likewise.
6998 * config/m68k/linux.mt (TDEPFILES): Likewise.
6999 * config/m68k/m68kv4.mh (NATDEPFILES): Likewise.
7000 * config/m68k/nbsd.mh (NATDEPFILES): Likewise.
7001 * config/m68k/sun2os4.mt (TDEPFILES): Likewise.
7002 * config/m68k/sun3os4.mt (TDEPFILES): Likewise.
7003 * config/m88k/delta88v4.mh (NATDEPFILES): Likewise.
7004 * config/mips/mipsv4.mh (NATDEPFILES): Likewise.
7005 * config/ns32k/nbsd.mh (NATDEPFILES): Likewise.
7006 * config/powerpc/linux.mt (TDEPFILES): Likewise.
7007 * config/powerpc/nbsd.mh (NATDEPFILES): Likewise.
7008 * config/powerpc/solaris.mh (NATDEPFILES): Likewise.
7009 * config/sh/linux.mt (TDEPFILES): Likewise.
7010 * config/sparc/linux.mt (TDEPFILES): Likewise.
7011 * config/sparc/nbsd.mh (NATDEPFILES): Likewise.
7012 * config/sparc/nbsdelf.mh (NATDEPFILES): Likewise.
7013 * config/sparc/sp64linux.mt (TDEPFILES): Likewise.
7014 * config/sparc/sun4os4.mt (TDEPFILES): Likewise.
7015 * config/sparc/sun4sol2.mh (NATDEPFILES): Likewise.
7019 * utils.c (xmrealloc, xcalloc): Return NULL for zero-sized requests.
7023 * MAINTAINERS (Write After Approval): Update Philip Blundell.
7027 * MAINTAINERS: Add myself to write after approval list.
7031 * i387-tdep.c (print_i387_status_word): Fix printing of Stack
7032 fault flag. It is bit 6 of the x87 FPU status word, not bit 7.
7036 * configure.host (m88*-harris-cxux*): Mark as obsolete.
7037 * configure.tgt: Ditto.
7038 * config/m88k/xm-cxux.h: Ditto.
7039 * config/m88k/tm-cxux.h: Ditto.
7040 * config/m88k/nm-cxux.h: Ditto.
7041 * config/m88k/cxux.mt: Ditto.
7042 * config/m88k/cxux.mh: Ditto.
7046 * Makefile.in: Delete rules for obsolete files.
7050 * stack.c (parse_frame_specification): For one argument case,
7051 handle the situation where the argument is an integer, not an
7052 address -- arguably the most common case. This matters on
7053 targets where pointers and addresses are different.
7057 * TODO: Revise 5.1 list. Delete PARAMS task. Add coding standard
7058 review. Clarify GNU/LINUX/sparc. Move other tasks to 5.2 or
7063 * TODO (GDB 5.1 Known Problems): Document problem of building GDB
7064 with SID on Solaris 8.
7068 * defs.h: Provide prototypes for floatformat_is_negative,
7069 floatformat_is_nan and floatformat_mantissa.
7070 * utils.c: Include "gdb_assert.h".
7071 (floatformat_is_negative): New function.
7072 (floatformat_is_nan): New function.
7073 (floatformat_mantissa): New function.
7074 * valprint.c: Include "floatformat.h".
7075 (print_floating): Get rid of the Linux-specific
7076 TARGET_ANALYZE_FLOATING macro and rewrite NaN detection with the
7077 help these new functions. Print NaN's in a format conforming to
7082 * top.c (init_main): Make `set history file name' complete on file
7087 * Makefile.in (LINTFLAGS): Update to contain all of the macros
7088 which define include paths used when compiling.
7090 * util.c (savestring, msavestring): Change type of length argument.
7091 * defs.h (savestring, msavestring): Update to match.
7093 * symtab.h (decode_line_1): Removed declaration.
7095 * symfile.c (#include <assert.h>): Removed.
7097 * arch-utils.c (#include <ctype.h>): Removed.
7098 * c-typeprint.c: Likewise.
7099 * dbxread.c: Likewise.
7100 * gdbtypes.c: Likewise.
7101 * target.c: Likewise.
7102 * os9kread.c: Likewise.
7104 * c-valprint.c (#include "demangle.h"): Removed.
7105 * ch-typeprint.c: Likewise.
7107 * f-typeprint.c: Likewise.
7108 * f-valprint.c: Likewise.
7109 * m2-typeprint.c: Likewise.
7110 * typeprint.c: Likewise.
7111 * p-typeprint.c: Likewise.
7112 * valarith.c: Likewise.
7113 * valprint.c: Likewise.
7115 * m2-typeprint.c (#include "gdb_string.h"): Removed.
7116 * nlmread.c: Likewise.
7118 * mdebugread.c (#include "gdb-stabs.h"): Removed.
7119 * minsyms.c: Likewise.
7120 * mipsread.c: Likewise.
7121 * nlmread.c: Likewise.
7123 * m2-typeprint.c (#include "obstack.h"): Removed.
7124 * m2-valprint.c: Likewise.
7126 * event-loop.c (#include <setjmp.h>): Removed.
7130 * MAINTAINERS: Remove self from specific maintenance domains
7131 (macos, gdbserver, documentation, testsuite).
7135 * 29k-share/udi/udip2soc.c, Makefile.in, a29k-tdep.c,
7136 a68v-nat.c, abug-rom.c, aclocal.m4, alpha-nat.c, alpha-tdep.c,
7137 annotate.c, annotate.h, arc-tdep.c, arch-utils.c,
7138 arch-utils.h, arm-tdep.c, ax-gdb.c, ax-gdb.h, ax-general.c,
7139 ax.h, bcache.c, bcache.h, blockframe.c, breakpoint.c,
7140 breakpoint.h, buildsym.c, buildsym.h, c-exp.y, c-lang.c,
7141 c-lang.h, c-typeprint.c, c-valprint.c, call-cmds.h, ch-exp.c,
7142 ch-lang.c, ch-lang.h, ch-typeprint.c, ch-valprint.c,
7143 cli/cli-cmds.h, cli/cli-decode.c, cli/cli-decode.h,
7144 cli/cli-script.c, cli/cli-script.h, cli/cli-setshow.h,
7145 cli/cli-utils.h, cli-out.c, cli-out.h, coff-solib.c,
7146 coff-solib.h, coffread.c, command.h, complaints.c,
7147 complaints.h, completer.c, completer.h,
7148 config/a29k/nm-ultra3.h, config/a29k/tm-a29k.h,
7149 config/a29k/tm-ultra3.h, config/a29k/tm-vx29k.h,
7150 config/a29k/xm-ultra3.h, config/alpha/nm-fbsd.h,
7151 config/alpha/nm-linux.h, config/alpha/nm-osf.h,
7152 config/alpha/nm-osf2.h, config/alpha/nm-osf3.h,
7153 config/alpha/tm-alpha.h, config/alpha/tm-alphalinux.h,
7154 config/alpha/xm-alphalinux.h, config/alpha/xm-alphaosf.h,
7155 config/alpha/xm-fbsd.h, config/arc/tm-arc.h,
7156 config/arm/nm-linux.h, config/arm/tm-arm.h,
7157 config/arm/tm-embed.h, config/d10v/tm-d10v.h,
7158 config/d30v/tm-d30v.h, config/fr30/tm-fr30.h,
7159 config/h8300/tm-h8300.h, config/h8500/tm-h8500.h,
7160 config/i386/nm-fbsd.h, config/i386/nm-gnu.h,
7161 config/i386/nm-i386bsd.h, config/i386/nm-i386mach.h,
7162 config/i386/nm-i386sco.h, config/i386/nm-i386sol2.h,
7163 config/i386/nm-i386v.h, config/i386/nm-i386v4.h,
7164 config/i386/nm-i386v42mp.h, config/i386/nm-linux.h,
7165 config/i386/nm-nbsd.h, config/i386/nm-nbsdelf.h,
7166 config/i386/nm-ptx4.h, config/i386/nm-sun386.h,
7167 config/i386/nm-symmetry.h, config/i386/tm-cygwin.h,
7168 config/i386/tm-fbsd.h, config/i386/tm-i386.h,
7169 config/i386/tm-i386aix.h, config/i386/tm-i386bsd.h,
7170 config/i386/tm-i386gnu.h, config/i386/tm-i386lynx.h,
7171 config/i386/tm-i386m3.h, config/i386/tm-i386mk.h,
7172 config/i386/tm-i386nw.h, config/i386/tm-i386os9k.h,
7173 config/i386/tm-i386sco5.h, config/i386/tm-i386sol2.h,
7174 config/i386/tm-i386v.h, config/i386/tm-i386v4.h,
7175 config/i386/tm-i386v42mp.h, config/i386/tm-linux.h,
7176 config/i386/tm-nbsd.h, config/i386/tm-ptx.h,
7177 config/i386/tm-ptx4.h, config/i386/tm-sun386.h,
7178 config/i386/tm-symmetry.h, config/i386/tm-vxworks.h,
7179 config/i386/xm-fbsd.h, config/i386/xm-i386bsd.h,
7180 config/i386/xm-i386gnu.h, config/i386/xm-i386m3.h,
7181 config/i386/xm-i386mach.h, config/i386/xm-i386mk.h,
7182 config/i386/xm-i386sco.h, config/i386/xm-i386v4.h,
7183 config/i386/xm-linux.h, config/i386/xm-nbsd.h,
7184 config/i386/xm-ptx.h, config/i386/xm-ptx4.h,
7185 config/i386/xm-sun386.h, config/i386/xm-symmetry.h,
7186 config/i960/tm-i960.h, config/i960/tm-mon960.h,
7187 config/i960/tm-nindy960.h, config/i960/tm-vx960.h,
7188 config/ia64/nm-aix.h, config/ia64/nm-linux.h,
7189 config/ia64/tm-aix.h, config/ia64/tm-ia64.h,
7190 config/ia64/tm-linux.h, config/ia64/xm-aix.h,
7191 config/ia64/xm-linux.h, config/m68k/nm-apollo68b.h,
7192 config/m68k/nm-delta68.h, config/m68k/nm-dpx2.h,
7193 config/m68k/nm-hp300bsd.h, config/m68k/nm-hp300hpux.h,
7194 config/m68k/nm-linux.h, config/m68k/nm-sun3.h,
7195 config/m68k/tm-apollo68b.h, config/m68k/tm-cisco.h,
7196 config/m68k/tm-dpx2.h, config/m68k/tm-es1800.h,
7197 config/m68k/tm-hp300bsd.h, config/m68k/tm-hp300hpux.h,
7198 config/m68k/tm-isi.h, config/m68k/tm-linux.h,
7199 config/m68k/tm-m68k.h, config/m68k/tm-m68kv4.h,
7200 config/m68k/tm-mac.h, config/m68k/tm-monitor.h,
7201 config/m68k/tm-nbsd.h, config/m68k/tm-news.h,
7202 config/m68k/tm-os68k.h, config/m68k/tm-sun3.h,
7203 config/m68k/tm-vx68.h, config/m68k/xm-3b1.h,
7204 config/m68k/xm-apollo68b.h, config/m68k/xm-dpx2.h,
7205 config/m68k/xm-hp300bsd.h, config/m68k/xm-hp300hpux.h,
7206 config/m68k/xm-linux.h, config/m68k/xm-m68kv4.h,
7207 config/m68k/xm-mpw.h, config/m68k/xm-news.h,
7208 config/m68k/xm-sun2.h, config/m68k/xm-sun3.h,
7209 config/m68k/xm-sun3os4.h, config/m88k/nm-delta88v4.h,
7210 config/m88k/tm-delta88.h, config/m88k/tm-delta88v4.h,
7211 config/m88k/tm-m88k.h, config/m88k/xm-cxux.h,
7212 config/m88k/xm-delta88.h, config/m88k/xm-delta88v4.h,
7213 config/m88k/xm-dgux.h, config/mcore/tm-mcore.h,
7214 config/mips/nm-irix3.h, config/mips/nm-irix4.h,
7215 config/mips/nm-irix5.h, config/mips/nm-mips.h,
7216 config/mips/nm-news-mips.h, config/mips/tm-bigmips.h,
7217 config/mips/tm-embed.h, config/mips/tm-embed64.h,
7218 config/mips/tm-embedl.h, config/mips/tm-embedl64.h,
7219 config/mips/tm-irix3.h, config/mips/tm-irix5.h,
7220 config/mips/tm-mips.h, config/mips/tm-mips64.h,
7221 config/mips/tm-mipsm3.h, config/mips/tm-mipsv4.h,
7222 config/mips/tm-tx39.h, config/mips/tm-tx39l.h,
7223 config/mips/tm-vr4100.h, config/mips/tm-vr4300.h,
7224 config/mips/tm-vr4300el.h, config/mips/tm-vr4xxx.h,
7225 config/mips/tm-vr4xxxel.h, config/mips/tm-vr5000.h,
7226 config/mips/tm-vr5000el.h, config/mips/xm-irix3.h,
7227 config/mips/xm-irix4.h, config/mips/xm-irix5.h,
7228 config/mips/xm-mips.h, config/mips/xm-mipsm3.h,
7229 config/mips/xm-mipsv4.h, config/mips/xm-news-mips.h,
7230 config/mips/xm-riscos.h, config/mn10200/tm-mn10200.h,
7231 config/mn10300/tm-mn10300.h, config/nm-gnu.h,
7232 config/nm-linux.h, config/nm-lynx.h, config/nm-m3.h,
7233 config/nm-sysv4.h, config/none/nm-none.h,
7234 config/none/tm-none.h, config/none/xm-none.h,
7235 config/ns32k/nm-nbsd.h, config/ns32k/nm-umax.h,
7236 config/ns32k/tm-merlin.h, config/ns32k/tm-nbsd.h,
7237 config/ns32k/tm-ns32km3.h, config/ns32k/tm-umax.h,
7238 config/ns32k/xm-merlin.h, config/ns32k/xm-ns32km3.h,
7239 config/pa/nm-hppab.h, config/pa/nm-hppah.h,
7240 config/pa/nm-hppao.h, config/pa/tm-hppa.h,
7241 config/pa/tm-hppa64.h, config/pa/tm-hppah.h,
7242 config/pa/xm-hppab.h, config/pa/xm-hppah.h,
7243 config/powerpc/nm-aix.h, config/powerpc/nm-linux.h,
7244 config/powerpc/nm-macos.h, config/powerpc/nm-nbsd.h,
7245 config/powerpc/tm-cygwin.h, config/powerpc/tm-linux.h,
7246 config/powerpc/tm-macos.h, config/powerpc/tm-ppc-aix.h,
7247 config/powerpc/tm-ppc-eabi.h, config/powerpc/tm-ppc-nw.h,
7248 config/powerpc/tm-ppcle-eabi.h, config/powerpc/tm-solaris.h,
7249 config/powerpc/xm-aix.h, config/powerpc/xm-linux.h,
7250 config/powerpc/xm-mpw.h, config/rs6000/nm-rs6000.h,
7251 config/rs6000/tm-rs6000.h, config/rs6000/tm-rs6000ly.h,
7252 config/rs6000/xm-aix4.h, config/rs6000/xm-rs6000.h,
7253 config/sh/tm-linux.h, config/sh/tm-sh.h, config/sh/tm-wince.h,
7254 config/sparc/nm-linux.h, config/sparc/nm-nbsd.h,
7255 config/sparc/nm-nbsdelf.h, config/sparc/nm-sparclynx.h,
7256 config/sparc/nm-sun4os4.h, config/sparc/nm-sun4sol2.h,
7257 config/sparc/tm-linux.h, config/sparc/tm-sp64.h,
7258 config/sparc/tm-sp64sim.h, config/sparc/tm-sparc.h,
7259 config/sparc/tm-sparclet.h, config/sparc/tm-sparclite.h,
7260 config/sparc/tm-sparclynx.h, config/sparc/tm-spc-em.h,
7261 config/sparc/tm-sun4os4.h, config/sparc/tm-sun4sol2.h,
7262 config/sparc/xm-sun4os4.h, config/sparc/xm-sun4sol2.h,
7263 config/tic80/tm-tic80.h, config/tm-linux.h, config/tm-lynx.h,
7264 config/tm-sysv4.h, config/v850/tm-v850.h, config/vax/tm-vax.h,
7265 config/w65/tm-w65.h, config/xm-aix4.h, config/xm-lynx.h,
7266 config/xm-mpw.h, config/xm-nbsd.h, config/xm-sysv4.h,
7267 config/z8k/tm-z8k.h, configure.in, core-aout.c, core-regset.c,
7268 core-sol2.c, corefile.c, corelow.c, cp-valprint.c,
7269 cpu32bug-rom.c, cxux-nat.c, d10v-tdep.c, d30v-tdep.c,
7270 dbug-rom.c, dbxread.c, dcache.c, dcache.h, defs.h,
7271 delta68-nat.c, demangle.c, dink32-rom.c, dpx2-nat.c, dsrec.c,
7272 dstread.c, dve3900-rom.c, dwarf2read.c, dwarfread.c,
7273 elfread.c, environ.c, environ.h, eval.c, event-loop.c,
7274 event-loop.h, event-top.c, exec.c, expprint.c, f-exp.y,
7275 f-lang.c, f-lang.h, f-typeprint.c, f-valprint.c, findvar.c,
7276 fork-child.c, fr30-tdep.c, frame.c, frame.h, gdb-events.c,
7277 gdb-events.h, gdb-events.sh, gdb-stabs.h, gdb.1, gdb_string.h,
7278 gdb_thread_db.h, gdbcmd.h, gdbcore.h, gdbserver/Makefile.in,
7279 gdbserver/gdbreplay.c, gdbserver/gdbserver.1,
7280 gdbserver/low-hppabsd.c, gdbserver/low-linux.c,
7281 gdbserver/low-lynx.c, gdbserver/low-nbsd.c,
7282 gdbserver/low-sim.c, gdbserver/low-sparc.c,
7283 gdbserver/low-sun3.c, gdbserver/remote-utils.c,
7284 gdbserver/server.c, gdbserver/server.h, gdbserver/utils.c,
7285 gdbthread.h, gdbtypes.c, gdbtypes.h, gnu-nat.c, gnu-nat.h,
7286 gnu-regex.c, gnu-regex.h, h8300-tdep.c, h8500-tdep.c,
7287 hp-psymtab-read.c, hp-symtab-read.c, hp300ux-nat.c,
7288 hppa-tdep.c, hppab-nat.c, hppah-nat.c, hppam3-nat.c, hpread.c,
7289 hpread.h, hpux-thread.c, i386-tdep.c, i386aix-nat.c,
7290 i386b-nat.c, i386gnu-nat.c, i386ly-tdep.c, i386m3-nat.c,
7291 i386mach-nat.c, i386nbsd-nat.c, i386nbsd-tdep.c, i386v-nat.c,
7292 i386v4-nat.c, i387-tdep.c, i960-tdep.c, infcmd.c, inferior.h,
7293 inflow.c, infptrace.c, infrun.c, inftarg.c, infttrace.c,
7294 irix4-nat.c, irix5-nat.c, isi-xdep.c, jv-exp.y, jv-lang.c,
7295 jv-lang.h, jv-typeprint.c, jv-valprint.c, kdb-start.c,
7296 kod-cisco.c, kod.c, language.c, language.h, lin-thread.c,
7297 linespec.c, linespec.h, linux-thread.c, lynx-nat.c, m2-exp.y,
7298 m2-lang.c, m2-lang.h, m2-typeprint.c, m2-valprint.c, m3-nat.c,
7299 m32r-rom.c, m32r-tdep.c, m68k-tdep.c, m68klinux-nat.c,
7300 m68knbsd-nat.c, m88k-nat.c, m88k-tdep.c, mac-nat.c,
7301 mac-xdep.c, main.c, maint.c, mcore-rom.c, mcore-tdep.c,
7302 mdebugread.c, mem-break.c, minimon.h, minsyms.c, mips-nat.c,
7303 mips-tdep.c, mipsm3-nat.c, mipsread.c, mipsv4-nat.c,
7304 mn10200-tdep.c, mn10300-tdep.c, mon960-rom.c, monitor.c,
7305 monitor.h, news-xdep.c, nindy-share/env.h, nindy-tdep.c,
7306 nlm/Makefile.in, nlmread.c, ns32k-tdep.c, ns32km3-nat.c,
7307 ns32knbsd-nat.c, objfiles.c, objfiles.h, ocd.c, ocd.h,
7308 op50-rom.c, os9kread.c, osfsolib.c, p-exp.y, pa64solib.c,
7309 pa64solib.h, parse.c, parser-defs.h, partial-stab.h,
7310 ppc-bdm.c, ppc-linux-nat.c, ppc-linux-tdep.c, ppcbug-rom.c,
7311 ppcnbsd-nat.c, printcmd.c, proc-api.c, proc-events.c,
7312 proc-flags.c, proc-utils.h, proc-why.c, procfs.c, ptx4-nat.c,
7313 rdi-share/Makefile.in, rdi-share/aclocal.m4, regcache.c,
7314 regcache.h, remote-adapt.c, remote-array.c, remote-bug.c,
7315 remote-e7000.c, remote-eb.c, remote-es.c, remote-est.c,
7316 remote-hms.c, remote-mips.c, remote-mm.c, remote-nindy.c,
7317 remote-nrom.c, remote-os9k.c, remote-rdi.c, remote-rdp.c,
7318 remote-sds.c, remote-sim.c, remote-st.c, remote-udi.c,
7319 remote-utils.c, remote-utils.h, remote-vx.c, remote.c,
7320 remote.h, reply_mig_hack.awk, rom68k-rom.c, rs6000-nat.c,
7321 rs6000-tdep.c, scm-exp.c, scm-lang.c, scm-lang.h, scm-tags.h,
7322 scm-valprint.c, ser-e7kpc.c, ser-mac.c, ser-ocd.c, ser-pipe.c,
7323 ser-tcp.c, ser-unix.c, serial.c, serial.h, sh-tdep.c,
7324 sh3-rom.c, sol-thread.c, solib-aix5.c, solib-svr4.c, solib.c,
7325 solib.h, solist.h, somread.c, somsolib.c, somsolib.h,
7326 source.c, sparc-nat.c, sparc-tdep.c, sparcl-tdep.c,
7327 sparclet-rom.c, srec.h, stabsread.c, stabsread.h, stack.c,
7328 standalone.c, stop-gdb.c, stuff.c, sun3-nat.c, sun386-nat.c,
7329 symfile.c, symfile.h, symm-nat.c, symm-tdep.c, symmisc.c,
7330 symtab.c, symtab.h, target.c, target.h, terminal.h, thread.c,
7331 tic80-tdep.c, top.c, top.h, tracepoint.c, tracepoint.h,
7332 typeprint.c, ui-file.c, ui-file.h, ui-out.h, ultra3-nat.c,
7333 ultra3-xdep.c, umax-xdep.c, utils.c, v850-tdep.c, v850ice.c,
7334 valarith.c, valops.c, valprint.c, value.h, values.c, varobj.h,
7335 vax-tdep.c, version.h, vx-share/vxWorks.h, vx-share/xdr_ld.c,
7336 vx-share/xdr_ptrace.c, vx-share/xdr_ptrace.h,
7337 vx-share/xdr_rdb.c, w65-tdep.c, w89k-rom.c, win32-nat.c,
7338 wrapper.c, wrapper.h, xcoffread.c, xcoffsolib.c, xcoffsolib.h,
7339 xmodem.c, xmodem.h, z8k-tdep.c: Update/correct copyright
7344 * acconfig.h (HAVE_PRSYSENT_T, HAVE_PR_SIGSET_T,
7345 HAVE_PR_SIGACTION64_T, HAVE_PR_SIGINFO64_T): New configure
7347 * configure.in (prsysent_t, pr_sigset_t, pr_sigaction64_t,
7348 pr_siginfo64_t): Test for these typedefs in <sys/procfs.h>.
7349 (sys/fault.h, sys/select.h): Test for presence of these
7351 (ia64-*-aix*): Define NEW_PROC_API for this host.
7352 * configure: Regenerate.
7353 * config.in: Regenerate.
7355 * configure.host (ia64-*-aix*): New host.
7356 * configure.tgt (ia64-*-aix*): New target.
7360 * TODO (GDB 5.1 Known Problems): Document z8k as broken.
7364 * wince.c: Change realloc to xrealloc throughout.
7365 (handle_load_dll): Use void * rather than PTR in argument.
7369 * ocd.h (ocd_xfer_memory): Add ``attrib'' parameter.
7370 * ocd.c (ocd_xfer_memory): Ditto.
7371 * ser-ocd.c (ocd_setstopbits): New function. Add to ocd_ops.
7372 * MAINTAINERS: Document powerpc-eabi and powerpcle-eabi as
7373 buildable with ,-Werror.
7375 * Makefile.in (symfile_h): Define.
7376 (mcore-tdep.o): Add $(symfile_h), $(gdbcore_h) and $(inferior_h).
7377 * mcore-tdep.c: Include "symfile.h", "gdbcore.h" and "inferior.h".
7378 * MAINTAINERS: Document mcore-elf and mcore-pe as buildable with
7381 * dsrec.c (make_srec): Fix internal_error fmt arg.
7382 * MAINTAINERS: Document i960-coff as buildable with ,-Werror.
7386 * solib-aix5.c (aix5_relocate_main_executable): Don't use ANOFFSET
7391 * MAINTAINERS (paper trail): Update.
7393 * CONTRIBUTE: Update note on ``Fix PR gdb/4706'' convention.
7398 * mn10200-tdep.c (mn10200_frame_chain): Pass 0 for ``pc''
7399 parameter to mn10200_analyze_prologue.
7401 * config/mn10200/tm-mn10200.h: Include "regcache.h".
7402 * MAINTAINERS: Document that mn10200-elf target is buildable.
7406 * config/ia64/xm-aix.h (GDB_GREGSET_T, GDB_FPREGSET_T): Move defines
7408 * config/ia64/nm-aix.h (GDB_GREGSET_T, GDB_FPREGSET_T): ...to here.
7409 (MONTEREY): Don't define.
7414 * config/mn10300/tm-mn10300.h (E0_REGNUM): Correct to 15.
7418 * sparc-nat.c (sparc-nat.c): Don't include self.
7422 * defs.h (__CYGWIN__): Moved conditional which defines __CYGWIN__
7423 if __CYGWIN32__ is set from here.
7424 * config/i386/xm-cygwin.h: To here.
7425 * config/powerpc/xm-cygwin.h: To here.
7427 * i386-stub.c (handle_exception): Use 'T' response packet.
7431 * m32r-tdep.c: Fix cut and paste error in comment.
7435 * symtab.c (print_msymbol_info): Print addresses by portable method
7436 longest_local_hex_string_custom. Allow for 64-bit addresses.
7440 * gdbtypes.h (builtin_type_f_integer): Removed duplicate declaration.
7441 (MAX_OF_TYPE): Wrap macro definition in parenthesis.
7442 (MIN_OF_TYPE): Likewise.
7444 * memattr.h (mem_access_mode): Removed extraneous trailing comma.
7448 * Makefile.in (os9kread.o): Do not compile with WERROR_CFLAGS.
7449 * os9kread.c (os9k_process_one_symbol): Add assert to detect
7450 ``loses if sizeof (char *) > sizeof (int)''.
7454 * gdb_assert.h: Document pragmatics behind gdb_assert's case.
7458 * Makefile.in (gdbtk-cmds.o): Add $(regcache_h) to dependency
7464 * Makefile.in (regcache_h): Define. Add $(regcache_h) to
7469 * printcmd.c (print_address_numeric): Update comments to refer
7470 to sizeof addr, not sizeof pointer.
7471 (x_command): Remove needless whitespace (shorten long line).
7473 * breakpoint.c (print_one_breakpoint): Formatting clean-up.
7474 (read_memory_nobpt): Ditto.
7475 (ep_is_catchpoint): Ditto.
7476 (ep_is_shlib_catchpoint): Ditto.
7477 (ep_is_exception_catchpoint): Ditto.
7478 (describe_other_breakpoints): Ditto.
7482 * regcache.h (register_valid): Fix comment documenting valid
7487 From Steven Johnson:
7488 * regcache.h: New file.
7490 * value.h (read_register_bytes, read_register_gen)
7491 (write_register_gen, write_register_bytes)
7492 (read_register, read_register_pid)
7493 (read_signed_register, read_signed_register_pid)
7494 (write_register, write_register_pid)
7495 (register_cached, set_register_cached)
7496 (register_changed, register_buffer)
7497 (registers_changed, supply_register): Move declaration from here.
7498 * regcache.h: To here.
7499 * gdbcore.h (registers_fetched): Ditto.
7500 * inferior.h (registers, registers_valid): Ditto.
7502 * regcache.c (generic_target_read_pc, read_pc_pid, read_pc,
7503 generic_target_write_pc, write_pc_pid, write_pc,
7504 generic_target_read_sp, read_sp, generic_target_write_sp,
7505 write_sp, generic_target_read_fp, read_fp,
7506 generic_target_write_fp, write_fp): Add note that these functions
7507 will be moved from this file.
7509 * a29k-tdep.c: Include "regcache.h".
7510 * a68v-nat.c: Ditto.
7511 * abug-rom.c: Ditto.
7512 * alpha-nat.c: Ditto.
7513 * alpha-tdep.c: Ditto.
7514 * alphabsd-nat.c: Ditto.
7515 * arc-tdep.c: Ditto.
7516 * arm-linux-nat.c: Ditto.
7517 * arm-linux-tdep.c: Ditto.
7518 * arm-tdep.c: Ditto.
7519 * blockframe.c: Ditto.
7520 * core-aout.c: Ditto.
7521 * core-sol2.c: Ditto.
7523 * cpu32bug-rom.c: Ditto.
7524 * cxux-nat.c: Ditto.
7525 * d10v-tdep.c: Ditto.
7526 * d30v-tdep.c: Ditto.
7527 * dbug-rom.c: Ditto.
7528 * dink32-rom.c: Ditto.
7529 * dve3900-rom.c: Ditto.
7531 * fr30-tdep.c: Ditto.
7533 * go32-nat.c: Ditto.
7534 * h8300-tdep.c: Ditto.
7535 * h8500-tdep.c: Ditto.
7536 * hp300ux-nat.c: Ditto.
7537 * hppa-tdep.c: Ditto.
7538 * hppab-nat.c: Ditto.
7539 * hppah-nat.c: Ditto.
7540 * hppam3-nat.c: Ditto.
7541 * hpux-thread.c: Ditto.
7542 * i386-linux-nat.c: Ditto.
7543 * i386-linux-tdep.c: Ditto.
7544 * i386-tdep.c: Ditto.
7545 * i386aix-nat.c: Ditto.
7546 * i386b-nat.c: Ditto.
7547 * i386bsd-nat.c: Ditto.
7548 * i386gnu-nat.c: Ditto.
7549 * i386ly-tdep.c: Ditto.
7550 * i386m3-nat.c: Ditto.
7551 * i386mach-nat.c: Ditto.
7552 * i386nbsd-nat.c: Ditto.
7553 * i386v4-nat.c: Ditto.
7554 * i387-nat.c: Ditto.
7555 * i387-tdep.c: Ditto.
7556 * i960-tdep.c: Ditto.
7557 * ia64-aix-nat.c: Ditto.
7558 * ia64-linux-nat.c: Ditto.
7559 * ia64-tdep.c: Ditto.
7560 * infptrace.c: Ditto.
7562 * irix4-nat.c: Ditto.
7563 * irix5-nat.c: Ditto.
7565 * lin-thread.c: Ditto.
7566 * lynx-nat.c: Ditto.
7568 * m32r-rom.c: Ditto.
7569 * m32r-tdep.c: Ditto.
7570 * m68hc11-tdep.c: Ditto.
7571 * m68k-tdep.c: Ditto.
7572 * m68klinux-nat.c: Ditto.
7573 * m68knbsd-nat.c: Ditto.
7574 * m68knbsd-tdep.c: Ditto.
7575 * m88k-nat.c: Ditto.
7576 * m88k-tdep.c: Ditto.
7578 * mcore-rom.c: Ditto.
7579 * mcore-tdep.c: Ditto.
7580 * mi/mi-main.c: Ditto.
7581 * mips-nat.c: Ditto.
7582 * mips-tdep.c: Ditto.
7583 * mipsm3-nat.c: Ditto.
7584 * mipsv4-nat.c: Ditto.
7585 * mn10200-tdep.c: Ditto.
7586 * mn10300-tdep.c: Ditto.
7588 * ns32km3-nat.c: Ditto.
7589 * ns32knbsd-nat.c: Ditto.
7591 * pa64solib.c: Ditto.
7593 * ppc-linux-nat.c: Ditto.
7594 * ppc-linux-tdep.c: Ditto.
7595 * ppcbug-rom.c: Ditto.
7596 * ppcnbsd-nat.c: Ditto.
7597 * ptx4-nat.c: Ditto.
7598 * regcache.c: Ditto.
7599 * remote-adapt.c: Ditto.
7600 * remote-array.c: Ditto.
7601 * remote-bug.c: Ditto.
7602 * remote-e7000.c: Ditto.
7603 * remote-eb.c: Ditto.
7604 * remote-es.c: Ditto.
7605 * remote-est.c: Ditto.
7606 * remote-hms.c: Ditto.
7607 * remote-mips.c: Ditto.
7608 * remote-mm.c: Ditto.
7609 * remote-nindy.c: Ditto.
7610 * remote-os9k.c: Ditto.
7611 * remote-rdi.c: Ditto.
7612 * remote-rdp.c: Ditto.
7613 * remote-sds.c: Ditto.
7614 * remote-sim.c: Ditto.
7615 * remote-st.c: Ditto.
7616 * remote-udi.c: Ditto.
7617 * remote-utils.c: Ditto.
7618 * remote-vx.c: Ditto.
7619 * remote-vx29k.c: Ditto.
7620 * remote-vx68.c: Ditto.
7621 * remote-vx960.c: Ditto.
7622 * remote-vxmips.c: Ditto.
7623 * remote-vxsparc.c: Ditto.
7625 * rom68k-rom.c: Ditto.
7626 * rs6000-nat.c: Ditto.
7627 * rs6000-tdep.c: Ditto.
7630 * sol-thread.c: Ditto.
7631 * solib-svr4.c: Ditto.
7632 * somsolib.c: Ditto.
7633 * sparc-nat.c: Ditto.
7634 * sparc-tdep.c: Ditto.
7635 * sparcl-tdep.c: Ditto.
7636 * sparclet-rom.c: Ditto.
7637 * sun3-nat.c: Ditto.
7638 * sun386-nat.c: Ditto.
7639 * symm-nat.c: Ditto.
7641 * thread-db.c: Ditto.
7643 * tic80-tdep.c: Ditto.
7644 * tracepoint.c: Ditto.
7645 * ultra3-nat.c: Ditto.
7646 * umax-xdep.c: Ditto.
7647 * uw-thread.c: Ditto.
7648 * v850-tdep.c: Ditto.
7651 * w65-tdep.c: Ditto.
7652 * w89k-rom.c: Ditto.
7653 * win32-nat.c: Ditto.
7655 * z8k-tdep.c: Ditto.
7659 * MAINTAINERS: Add Matt Hiller to Write After Approval list.
7663 * mn10300-tdep.c (mn10300_stab_reg_to_regnum): New function.
7664 (mn10300_gdbarch_init): Set appropriate elements of gdbarch to
7665 mn10300_stab_reg_to_regnum.
7669 * symtab.c (search_symbols): Fix off by one error in test for
7674 * config/sparc/sp64linux.mt: New file.
7675 * configure.tgt: Recognize sparc64-*-linux* as a sp64linux target.
7676 * configure.host: Recognize sparc64-*-linux* as a linux host.
7679 * config/sparc/tm-sp64linux.h: New file.
7683 * buildsym.c (push_subfile, pop_subfile): Replace call to abort()
7684 with call to internal_error().
7685 * dbxread.c (process_one_symbol): Likewise.
7686 * exec.c (build_section_table, xfer_memory): Likewise.
7687 * h8500-tdep.c (h8500_register_size, h8500_register_virtual_type):
7689 * hpread.c (hpread_type_translate, hpread_read_array_type)
7690 (hpread_type_lookup): Likewise.
7691 * i386-tdep.c (gdb_print_insn_i386): Likewise.
7692 * i960-tdep.c (mem): Likewise
7693 * inflow.c (set_sigio_trap, clear_sigio_trap): Likewise.
7694 * infptrace.c (child_resume): Likewise.
7695 * infttrace.c (_initialize_infttrace): Likewise.
7696 * language.c (binop_result_type, add_language): Likewise.
7697 * lynx-nat.c (store_inferior_registers): Likewise.
7698 * m3-nat.c (port_chain_insert, m3_trace_me): Likewise.
7699 * mdebugread.c (parse_partial_symbols): Likewise.
7700 * monitor.c (monitor_printf_noecho, monitor_printf)
7701 (monitor_dump_regs): Likewise.
7702 * ocd.c (stu_put_packet): Likewise.
7703 * printcmd.c (decode_format, print_scalar_formatted): Likewise.
7704 * remote-bug.c (bug_open): Likewise.
7705 * remote-e7000.c (fetch_regs_from_dump, e7000_wait): Likewise.
7706 * remote-es.c (es1800_read_bytes): Likewise.
7707 * remote-mips.c (common_breakpoint): Likewise.
7708 * remote-rdp.c (send_rdp): Likewise.
7709 * remote-sds.c (putmessage): Likewise.
7710 * sparc-nat.c (fetch_inferior_registers, store_inferior_registers):
7712 * sparcl-tdep.c (sparclite_download): Likewise.
7713 * symtab.c (lookup_partial_symbol): Likewise.
7714 * target.c (push_target, pop_target, initialize_targets): Likewise.
7715 * utils.c (internal_verror, malloc_botch, wrap_here, decimal2str):
7717 * valprint.c (print_decimal, print_longest, print_longest)
7718 (strcat_longest): Likewise.
7719 * w65-tdep.c (init_frame_pc, w65_push_dummy_frame): Likewise.
7720 * xmodem.c (xmodem_send_packet): Likewise.
7721 * z8k-tdep.c (init_frame_pc, z8k_push_dummy_frame): Likewise.
7722 * config/h8500/tm-h8500.h (STORE_STRUCT_RETURN): Likewise.
7723 * config/mn10200/tm-mn10200.h (EXTRACT_RETURN_VALUE)
7724 (STORE_RETURN_VALUE): Likewise.
7725 * config/ns32k/nm-umax.h (REGISTER_U_ADDR): Likewise.
7726 * config/ns32k/xm-merlin.h (REGISTER_U_ADDR): Likewise.
7727 * config/z8k/tm-z8k.h (STORE_STRUCT_RETURN, STORE_RETURN_VALUE):
7732 * CONTRIBUTE: Document how to cite a problem report.
7733 * TODO: Note need to replace CONTRIBUTE with generated file.
7735 * CONTRIBUTE: Mention that patches do not need to include the
7736 generated files gdbarch.h and gdbarch.c.
7740 * value.h (get_saved_register): Move from here.
7745 * solib.h (in_svr4_dynsym_resolve_code): Delete declaration.
7746 (in_solib_dynsym_resolve_code): Add declaration.
7747 (IN_SOLIB_DYNSYM_RESOLVE_CODE): Changed define to invoke
7748 in_solib_dynsym_resolve_code() rather than
7749 in_svr4_dynsym_resolve_code(). Also, removed the ifdefs
7750 which caused this macro to only be defined when
7751 SVR4_SHARED_LIBS is defined.
7752 * solib.c (in_solib_dynsym_resolve_code): New function.
7753 * solist.h (struct target_so_ops): Add new member
7754 in_dynsym_resolve_code.
7755 * solib-aix5.c (aix5_in_dynsym_resolve_code): Renamed from
7756 in_svr4_dynsym_resolve_code. Also, made static.
7757 (_initialize_aix5_solib): Initialize in_dynsym_resolve_code
7758 member in aix5_so_ops.
7759 * solib-svr4.c (svr4_in_dynsym_resolve_code): Renamed from
7760 in_svr4_dynsym_resolve_code. Also, added second version
7761 of this function which will be used when SVR4_SHARED_LIBS
7763 (_initialize_svr4_solib): Initialize in_dynsym_resolve_code
7764 member in svr4_so_ops.
7766 * ia64-aix-nat.c, ia64-aix-tdep.c, config/ia64/aix.mh,
7767 config/ia64/aix.mt, config/ia64/nm-aix.h, config/ia64/tm-aix.h,
7768 config/ia64/xm-aix.h: New files.
7769 * ia64-tdep.c (_initialize_ia64_tdep): Remove declaration.
7770 (ia64_aix_sigcontext_register_address): New declaration.
7771 (ia64_gdbarch_init): Provide for initialization of
7772 sigcontext_register_address member of struct tdep when
7773 on target is detected to be running AIX.
7774 * config/ia64/linux.mt (TDEPFILES): Add ia64-aix-tdep.o to
7779 * ia64-tdep.c (ia64_frameless_function_invocation): Implement.
7780 * config/ia64/linux.mh (NATDEPFILES): Use thread-db.o and lin-lwp.o
7781 for thread support instead of linux-thread.o and lin-thread.o.
7782 * config/ia64/nm-linux.h (PREPARE_TO_PROCEED, GET_THREAD_SIGNALS,
7783 ATTACH_LWP): Define to use the following lin-lwp.c functions...
7784 (lin_lwp_prepare_to_proceed, lin_thread_get_thread_signals,
7785 lin_lwp_attach_lwp): Declare.
7789 * mips-tdep.c (do_fp_register_row, do_fp_register_row): Fix printf
7794 * solib-aix5.c (solib-svr4.h): Remove include.
7795 (solib_break_names): Delete names which aren't actually
7797 (bkpt_names): Remove.
7798 (aix5_relocate_main_executable, bfd_lookup_symbol): Replace calls
7799 to STREQ() with equivalent calls to strcmp().
7800 (in_svr4_dynsym_resolve_code, enable_break, bfd_lookup_symbol,
7801 aix5_solib_create_inferior_hook): Revise comments.
7802 (enable_break): Remove old ``bkpt_names'' code.
7806 * Makefile.in (SFILES): Add frame.c .
7807 (COMMON_OBS): Add frame.o .
7808 (frame.o): New target.
7810 * frame.c (find_saved_register):
7811 (default_get_saved_register):
7812 (get_saved_register):
7813 (read_relative_register_raw_bytes_for_frame):
7814 (read_relative_register_raw_bytes): Moved to here.
7815 * regcache.c: From here.
7819 * solib-aix5.c: New file.
7823 * solib.c (info_sharedlibrary_command): Don't assume pointers
7824 are the same size of long, call longest_local_hex_string_custom().
7826 * solib-svr4.c (LM_ADDR): LM_ADDR is a signed offset, so
7827 extract_signed_integer() should be called instead of
7832 * MAINTAINERS: Add Martin Hunt to Write After Approval list.
7837 * mips-tdep.c (mips_register_raw_size): If FP_REGISTER_DOUBLE,
7838 then floating point registers are 8 bytes.
7842 * parse.c (write_exp_msymbol): Make the type CORE_ADDR, to
7843 accomodate 64-bit addresses.
7848 * symtab.c (lookup_symbol_aux): Call lookup_symbol_aux, not
7849 lookup_symbol, when trying to find a symbol with a mangled name,
7850 to avoid infinite recursion.
7854 * TODO (5.2): Mention G++ 3.0 ABI. General cleanups.
7858 * arm-tdep.c (check_prologue_cache): Fix off by 1 error.
7859 (save_prologue_cache): Ditto.
7864 * partial-stab.h (switch): Check that pst is not null
7865 before dereferencing it.
7870 * symfile.c (add_symbol_file_command): Always initialize
7871 my_cleanup using a NULL cleanup.
7875 * demangle.c (demangling_style_names): New variable.
7876 (_initialize_demangler): Fill demangling_style_names with the
7877 names of known demangling styles from libiberty_demanglers[]. Use
7878 add_set_enum_cmd instead of add_set_cmd, to get completion on
7879 demangling style names.
7881 * proc-api.c (_initialize_proc_api): Make `procfs-file' use
7882 file-name completion.
7884 * remote-rdi.c (_initialize_remote_rdi): Ditto for `rdilogfile'.
7886 * solib.c (_initialize_solib): Ditto for `solib-search-path' and
7887 `solib-absolute-prefix'.
7889 * tracepoint.c (_initialize_tracepoint): Ditto for
7892 * win32-nat.c (_initialize_inftarg): Ditto for `dll-symbols'.
7894 * cli/cli-cmds.c (init_cli_cmds): Make `shell' and `make' use
7895 file-name completion.
7897 * infcmd.c (_initialize_infcmd): Make the following commands use
7898 the file-name completer: `tty', `args', `path', `paths', and
7903 * go32-nat.c: Include i387-nat.h.
7904 (fetch_register): New function, uses some of the guts of
7905 go32_fetch_registers and calls i387_supply_register.
7906 (go32_fetch_registers): Most of the code moved into
7907 fetch_register. Use i387_supply_fsave.
7908 (store_register): Use i387_fill_fsave instead of custom code.
7909 (go32_store_registers): Use i387_fill_fsave.
7911 * Makefile.in (go32-nat.o): Depend on i387-nat.h.
7913 * config/i386/go32.mh (NATDEPFILES): Add i387-nat.o.
7915 * completer.c (gdb_completer_file_name_break_characters): Remove
7916 slash from file-name break characters.
7917 [__MSDOS__]: Special definition for DOS/Windows file names.
7918 (line_completion_function): When completing on file names, bump
7919 `p' to the first file-name constituent character of `word', before
7920 invoking the completer.
7924 * i387-nat.c: Include "i387-nat.h". Use regnum instead of regno
7925 consistently for parameter names. Fix comments accordingly.
7926 (i387_supply_register): New function.
7927 (i387_supply_fsave): Implement using i387_supply_register.
7928 * i387-nat.h: Use regnum instead of regno consistently for
7929 parameter names. Fix comments accordingly.
7930 (i387_supply_register): New prototype.
7934 * remote.c (build_remote_gdbarch_data): Use new TARGET_ADDR_BIT
7935 instead of TARGET_PTR_BIT (to support Harvard architectures).
7940 * hpux-thread.c (hpux_thread_xfer_memory): Add mem_attrib
7941 argument to parameter list and to call in order to conform to
7942 to_xfer_memory field of struct target_ops.
7946 * somsolib.c (som_solib_add_solib_objfile): Do not use
7947 section relocation feature of syms_from_objfile. Do my own
7948 section relocation, offsetting each section of the som by
7949 either text_addr - text_link_addr or data_start.
7953 * TODO (5.1): Move ``Hardware watchpint problems'' out of 5.1.
7957 * MAINTAINERS (paper trail): Update.
7961 * target.h (target_fetch_registers): Fix comment.
7965 * f-exp.y: Include <ctype.h>.
7966 (parse_number): Ensure that ``i'' is always initialized.
7970 * MAINTAINERS: Add myself to paper trail section.
7974 * configure.in (AC_CHECK_HEADERS): Add sys/file.h.
7975 * configure, config.in: Regenerate.
7976 * corelow.c: Include <sys/file.h> if present.
7980 * inflow.c (terminal_ours_1): Initialize ``osigtou''. Only
7981 declare when have SIGTTOU.
7985 * config/djgpp/fnchange.lst: Add entries for gdb/gdbtk/*/ChangeLog-*.
7989 * MAINTAINERS: Update my email address.
7993 * NEWS: Document that "info symbol" works with COFF debug info and
7996 * minsyms.c (lookup_minimal_symbol_by_pc_section): Don't skip
7997 symbols whose SYMBOL_BFD_SECTION is NULL.
8001 Get rid of AIX specific PC_LOAD_SEGMENT, replace with PC_SOLIB.
8002 * xcoffsolib.c (xcoff_solib_address): Renamed from
8003 pc_load_segment_name. Return NULL if address is not in a shared
8004 library. Cleanup shared library name construction, using xasprintf.
8005 Format shared library member names consistent with format in exec.c.
8006 (solib_info): Format shared library member names consistent with
8008 * config/rs6000/nm-rs6000.h: Replace PC_LOAD_SEGMENT with PC_SOLIB,
8009 using xcoff_solib_address for PC_SOLIB definition.
8010 * stack.c (print_frame): Remove PC_LOAD_SEGMENT code, no longer
8015 * mipsread.c (read_alphacoff_dynamic_symtab): Replace alloca calls
8016 with xmalloc calls and cleanups.
8020 * rs6000-nat.c (child_xfer_memory): Add missing parameter
8021 'struct mem_attrib *' required by 2001-01-23 change.
8025 Updates to "make TAGS":
8026 * Makefile.in (ALLDEPFILES): Remove altos-xdep.c arm-convert.s
8027 arm-xdep.c convex-tdep.c convex-xdep.c pyr-tdep.c pyr-xdep.c
8029 (TAGFILES_NO_SRCDIR): Add $(SUBDIR_CLI_SRCS).
8033 * config/djgpp/fnchange.lst: Remove extraneous "too many dots".
8038 * defs.h (continuation): Remove unused global variable.
8042 * configure.tgt: Remove references to convex, pyramid, altos and
8044 * configure.host: Ditto.
8045 * MAINTAINERS: Ditto.
8048 * tahoe-tdep.c: Delete obsolete file.
8049 * pyr-xdep.c: Ditto.
8050 * pyr-tdep.c: Ditto.
8051 * convex-tdep.c: Ditto.
8052 * convex-xdep.c: Ditto.
8053 * config/tahoe/xm-tahoe.h: Ditto.
8054 * config/tahoe/tm-tahoe.h: Ditto.
8055 * config/tahoe/tahoe.mt: Ditto.
8056 * config/tahoe/tahoe.mh: Ditto.
8057 * config/pyr/xm-pyr.h: Ditto.
8058 * config/pyr/tm-pyr.h: Ditto.
8059 * config/pyr/pyramid.mt: Ditto.
8060 * config/pyr/pyramid.mh: Ditto.
8061 * config/m68k/xm-altos.h: Ditto.
8062 * config/m68k/tm-altos.h: Ditto.
8063 * config/m68k/altos.mt: Ditto.
8064 * config/m68k/altos.mh: Ditto.
8065 * config/convex/xm-convex.h: Ditto.
8066 * config/convex/tm-convex.h: Ditto.
8067 * config/convex/convex.mt: Ditto.
8068 * config/convex/convex.mh: Ditto.
8069 * config/convex/Convex.notes: Ditto.
8070 * config/arm/xm-arm.h: Ditto.
8071 * config/arm/nm-arm.h: Ditto.
8072 * config/arm/arm.mt: Ditto.
8073 * config/arm/arm.mh: Ditto.
8074 * arm-convert.s: Ditto.
8075 * arm-xdep.c: Ditto.
8076 * altos-xdep.c: Ditto.
8080 * defs.h (internal_error, internal_verror): Add __FILE__ and
8082 * utils.c (internal_error, internal_verror): Update.
8084 * v850-tdep.c: Update calls to internal_error.
8090 * symm-nat.c: Ditto.
8091 * sparc-tdep.c: Ditto.
8094 * rs6000-tdep.c: Ditto.
8095 * rs6000-nat.c: Ditto.
8097 * remote-vx.c: Ditto.
8098 * remote-sim.c: Ditto.
8099 * remote-mips.c: Ditto.
8100 * regcache.c: Ditto.
8101 * objfiles.h: Ditto.
8102 * objfiles.c: Ditto.
8103 * mn10300-tdep.c: Ditto.
8104 * mips-tdep.c: Ditto.
8106 * m68k-tdep.c: Ditto.
8108 * language.c: Ditto.
8109 * infptrace.c: Ditto.
8110 * inferior.h: Ditto.
8112 * ia64-tdep.c: Ditto.
8113 * i386-tdep.c: Ditto.
8114 * i386-linux-nat.c: Ditto.
8115 * hppah-nat.c: Ditto.
8116 * go32-nat.c: Ditto.
8120 * event-loop.c: Ditto.
8121 * dwarf2read.c: Ditto.
8123 * d30v-tdep.c: Ditto.
8124 * d10v-tdep.c: Ditto.
8125 * cli/cli-setshow.c: Ditto.
8126 * cli/cli-script.c: Ditto.
8128 * breakpoint.c: Ditto.
8130 * arch-utils.c: Ditto.
8131 * a29k-tdep.c: Ditto.
8132 * gdb_assert.h: Ditto.
8133 * gdbarch.sh: Ditto.
8134 * gdbarch.h, gdbarch.c: Re-generate.
8139 * event-top.h [!STOP_SIGNAL]: #include <signal.h>.
8143 * remote-sim.c (dump_mem): Cleanup printf format argument.
8144 * MAINTAINERS: Update, mn10300-elf now builds.
8148 * event-top.c: Remove duplicate #include <signal.h>.
8152 * sol-thread.c (restore_inferior_pid): Save the PID in a freshly
8154 (save_inferior_pid): Restore the PID from that tempoary
8155 buffer. Delete the buffer.
8156 * utils.c (make_cleanup_close, do_close_cleanup): Ditto for FD.
8160 * MAINTAINERS: Add ``The Obvious Fix Rule''.
8164 * MAINTAINERS: Add Michael Snyder to Solaris/SPARC list.
8168 * gdbarch.sh: Include "gdb_assert.h".
8169 (struct gdbarch): Change ``nr_data'' to unsigned.
8170 (alloc_gdbarch_data, free_gdbarch_data): New functions.
8171 (gdbarch_free): Free the data-pointer vector. Use xfree to delete
8172 architecture vector.
8173 (struct gdbarch_data, struct gdbarch_data_registration): Move init
8174 method to gdbarch_data. Add free method, make index unsigned.
8175 (struct gdbarch_data_registry): Make nr unsigned.
8176 (register_gdbarch_data): Add free parameter. Store in
8178 (init_gdbarch_data): Use set_gdbarch_data.
8179 (set_gdbarch_data): New function.
8181 * gdbarch.h, gdbarch.c: Re-generate.
8185 * ser-unix.c (hardware_print_tty_state) [HAVE_SGTTY]: Call
8186 fprintf_filtered with correct arguments.
8191 * findvar.c: Buffers of size MAX_REGISTER_RAW_SIZE or REGISTER_BYTES
8192 must be allocated dynamically, since these are no longer constants.
8194 * regcache.c: Ditto.
8196 * sol-thread.c: Ditto.
8198 * config/sparc/sun4sol2.mh (MH_CFLAGS): Add -I/usr/include/v9, as a
8199 work-around for a missing Sun header file in solaris for sparc64.
8203 * config/arm/linux.mh (NATDEPFILES): Add proc-service.o,
8204 thread-db.o, lin-lwp.o; remove lin-thread.o, linux-thread.o.
8205 * config/arm/nm-linux.h (PREPARE_TO_PROCEED, ATTACH_LWP,
8206 GET_THREAD_SIGNALS): Define.
8207 * arm-linux-nat.c (fill_gregset): Correct type of argument.
8208 (supply_gregset): Likewise.
8209 (fill_fpregset): Likewise.
8210 (supply_fpregset): Likewise.
8214 * valops.c (value_cast): If casting a scalar to a pointer, do not
8215 issue a message about truncation unless it exceeds the length of
8216 an address, not the length of a pointer. This is because what the
8217 user gives us is an address, not a pointer, and we will ultimately
8218 convert it (via ADDRESS_TO_POINTER) to a pointer, not truncate it
8219 to a pointer. This allows things like "print *(int *)0x01000234"
8220 to work without generating a misleading message on a target having
8221 two byte pointers and four byte addresses.
8225 * win32-nat.c: Change PTR to void * throughout.
8229 * signals.h: Removed.
8230 * event-top.c (#include <signal.h>): Changed from signals.h.
8231 * inflow.c: Likewise.
8232 * mac-xdep.c: Likewise.
8233 * ser-pipe.c: Likewise.
8234 * ser-tcp.c: Likewise.
8235 * standalone.c: Likewise.
8237 * utils.c: Likewise.
8238 * Makefile.in: Removed signals.h from dependencies.
8243 * inferior.h (step_over_calls_kind): Remove trailing comma from
8245 (step_over_calls): Declare as extern rather than global.
8249 * sh-tdep.c: Update copyright.
8250 (sh_extract_return_value): Rewrite.
8251 (sh3e_sh4_extract_return_value): New function.
8252 (sh_gdbarch_init): Initialize gdbarch_extract-return_value to new
8253 version of the function for sh3e and sh4 CPUs.
8257 * hppah-nat.c (child_xfer_memory): Add parameter 'struct mem_attrib *'
8258 to conform with interface change.
8262 * config/djgpp/fnchange.lst: Tweak to make consistent with the
8265 * config/djgpp/djconfig.sh: Use explicit absolute file name when
8268 * ser-go32.c (dos_write) [UART_FIFO_WORKS]: Use outportsb only if
8269 UART_FIFO_WORKS is defined. Otherwise use outportb.
8272 * go32-nat.c (go32_xfer_memory): Make the argument list consistent
8273 with target.h's `to_xfer_memory' member.
8277 * ppc-bdm.c (#include <signal.h>): Removed.
8278 * remote-array.c: Likewise.
8279 * remote-bug.c: Likewise.
8280 * remote-e7000.c: Likewise.
8281 * remote-mips.c: Likewise.
8282 * remote-os9k.c: Likewise.
8283 * remote-st.c: Likewise.
8284 * remote-udi.c: Likewise.
8285 * remote-vx29k.c: Likewise.
8286 * remote-vx68.c: Likewise.
8287 * remote-vx960.c: Likewise.
8288 * remote-vxmips.c: Likewise.
8289 * remote-vxsparc.c: Likewise.
8293 * remote-utils.h (sr_set_device): Changed free() to xfree() where
8294 appropriate. Also changed Copyright to include 2001.
8295 * symtab.h (obstack_chunk_free, SYMBOL_INIT_DEMANGLED_NAME): Likewise.
8296 * value.h (value_free): Likewise.
8297 * gdbarch.sh (gdbarch_free): Likewise.
8298 * gdbarch.c, gdbarch.h: Regenerated.
8302 * cli/cli-cmds.c (apropos_command): Changed occurance of free() to
8303 xfree(). Also changed Copyright to include 2001.
8307 * monitor.c (#include "gdb_wait.h"): Removed.
8309 * ppc-bdm.c: Likewise.
8310 * remote-adapt.c: Likewise.
8311 * remote-array.c: Likewise.
8312 * remote-bug.c: Likewise.
8313 * remote-e7000.c: Likewise.
8314 * remote-eb.c: Likewise.
8315 * remote-es.c: Likewise.
8316 * remote-mips.c: Likewise.
8317 * remote-mm.c: Likewise.
8318 * remote-nindy.c: Likewise.
8319 * remote-os9k.c: Likewise.
8320 * remote-rdi.c: Likewise.
8321 * remote-rdp.c: Likewise.
8322 * remote-sds.c: Likewise.
8323 * remote-sim.c: Likewise.
8324 * remote-st.c: Likewise.
8325 * remote-udi.c: Likewise.
8326 * remote-vx.c: Likewise.
8327 * remote-vx29k.c: Likewise.
8328 * remote-vx68.c: Likewise.
8329 * remote-vx960.c: Likewise.
8330 * remote-vxmips.c: Likewise.
8331 * remote-vxsparc.c: Likewise.
8332 * remote.c: Likewise.
8333 * ser-pipe.c: Likewise.
8334 * ser-unix.c: Likewise.
8335 * Makefile.in: Updated dependencies.
8339 * event-loop.c: Change inclusion of string.h to gdb_string.h and
8340 updated the copyright notice.
8341 * ser-pipe.c: Ditto.
8342 * mi/mi-cmds.c: Ditto.
8343 * mi/mi-console.c: Ditto.
8344 * mi/mi-getopt.c: Ditto.
8345 * mi/mi-parse.c: Ditto.
8349 * MAINTAINERS: Add David Smith to Write After Approval list.
8353 * cli/cli-utils.c (putchar_filtered): Move function from here.
8354 * utils.c (putchar_filtered): To here.
8355 * cli/cli-utils.h (putchar_filtered): Move declaration from here.
8356 * defs.h (putchar_filtered): To here.
8360 * configure.in (AC_CHECK_FUNCS): Replace vfork test with
8361 AC_FUNC_VFORK macro.
8362 * config.in, configure: Re-generate.
8364 * gdb_vfork.h: New file.
8365 * ser-pipe.c (pipe_open): Update. Include "gdb_vfork.h".
8366 * fork-child.c (fork_inferior): Ditto.
8370 * defs.h (strsave): Delete declaration.
8371 * utils.c (strsave): Delete definition.
8372 * TODO (strsave): Update
8374 * mac-xdep.c (tilde_expand): Replace strsave with xstrdup.
8375 * sparcl-tdep.c (sparclite_open): Ditto.
8376 * mips-tdep.c (mips_set_processor_type_command): Ditto.
8377 (_initialize_mips_tdep): Ditto.
8378 * solib.c (solib_open): Ditto.
8379 * symfile.c (add_filename_language): Ditto.
8380 (set_ext_lang_command): Ditto.
8381 * source.c (init_source_path): Ditto.
8383 * sh3-rom.c (sh3_open): Ditto.
8385 * serial.c (serial_open): Ditto.
8386 * remote-mips.c (common_open): Ditto.
8387 * monitor.c (monitor_open): Ditto.
8388 * m32r-rom.c (m32r_upload_command): Ditto.
8389 * infcmd.c (path_command): Ditto.
8390 * f-exp.y (parse_number): Ditto.
8391 * breakpoint.c (create_longjmp_breakpoint): Ditto.
8392 (create_thread_event_breakpoint): Ditto.
8393 * arc-tdep.c (arc_set_cpu_type_command): Ditto.
8394 (_initialize_arc_tdep): Ditto.
8396 Tue Jan 30 15:14:26 2001 Andrew Cagney <cagney@skil>
8398 * cli/cli-script.c (define_command): Check for a bad hook value in
8403 * configure/sh/embed.mt: New file.
8404 * configure/sh/linux.mt: New file.
8405 * configure/sh/sh.mt: Removed.
8406 * configure.tgt (sh-*-hms,sh-*-coff*,sh-*-elf*,sh-*-linux): New targets.
8411 * symtab.c (lookup_block_symbol): Use 'namespace' parameter in
8412 symbol comparisons in binary search.
8416 * win32-nat.c (child_xfer_memory): Add missing argument required by
8421 * ui-out.c (do_list_end): New function.
8422 (make_cleanup_ui_out_list_end): New function.
8423 * ui-out.h: Provide prototype for make_cleanup_ui_out_list_end.
8424 * stack.c (print_frame) [UI_OUT]: Call
8425 make_cleanup_ui_out_list_end to make sure we mark the end of the
8426 list if we do a non-local exit. At the end of the function,
8427 instead of calling ui_out_list_end directly, let do_cleanups
8432 Fix double parsing of filenames passed as command line arguments
8433 to GDB (causes weird handling of escape characters).
8434 Also, remove dependencies on the CLI from libgdb.
8435 * call-cmds.h: Remove declaration of exec_file_command().
8436 * gdbcore.h: Remove declaration of exec_file_command().
8437 Add declarations for exec_open() and exec_file_clear().
8438 * symfile.h: Add declarations for symbol_file_add_main() and
8439 symbol_file_clear().
8440 * exec.c (exec_open): New function. Implements to_open for exec
8442 (exec_file_clear): New function. Makes GDB forget about a previously
8443 specified executable file.
8444 (exec_file_attach): Move parsing of arguments from here ...
8445 (exec_file_command): ... to here.
8446 (init_exec_ops): Use exec_open(), not exec_file_command() to
8447 implement to_open for exec targets.
8448 * symfile.c (symbol_file_add_main): New function. Call symbol_file_add()
8449 with default values. Used when the file name has already been parsed.
8450 (symbol_file_clear): New function. Makes GDB forget about previously
8452 (symbol_file_command): Call the above function instead of inline code.
8453 * main.c: Include "symfile.h" and "gdbcore.h" instead of the deprecated
8455 (captured_main): Call exec_file_attach() and symbol_file_add_main()
8456 instead of exec_file_command() and symbol_file_command().
8457 (captured_main): Add comment.
8458 * corefile.c: Include "symfile.h".
8459 (core_file_command): Call symbol_file_add_main() instead of
8460 symbol_file_command().
8461 (reopen_exec_file): Call exec_open() instead of exec_file_command().
8462 * infcmd.c: Include "symfile.h".
8463 (attach_command): Call symbol_file_add_main() instead of
8464 symbol_file_command().
8465 * infrun.c: Remove comment about the inclusion of "symfile.h",
8466 not any longer appropriate.
8467 (follow_exec): Call symbol_file_add_main() instead of
8468 symbol_file_command().
8469 * remote-es.c: Include "symfile.h".
8470 (es1800_load): Call symbol_file_add_main() instead of
8471 symbol_file_command().
8472 * remote-vx.c: Remove comment about the inclusion of "symfile.h",
8473 not any longer appropriate.
8474 (vx-wait): Call symbol_file_add_main() instead of
8475 symbol_file_command().
8476 * solib-svr4.c (open_symbol_file_object): Call symbol_file_add_main()
8477 instead of symbol_file_command().
8478 * v850ice.c (ice_file): Call exec_open(), exec_file_attach() and
8479 symbol_file_add_main() instead of exec_file_command() and
8480 symbol_file_command().
8481 * Makefile.in: Update dependencies.
8485 * remote-udi.c (udi_open): Change strdup to xstrdup.
8486 * thread.c (thread_apply_all_command): Change strdup to xstrdup.
8487 Update copyright message.
8488 * varobj.c (delete_variable_1): Likewise.
8490 * gdb_string.h: Remove declaration of strdup. Update copyright
8492 * config/xm-mpw.h: Likewise.
8493 * config/i386/xm-i386mach.h: Likewise.
8494 * config/m68k/xm-apollo68b.h: Likewise.
8495 * config/m68k/xm-hp300bsd.h: Likewise.
8496 * config/rs6000/xm-rs6000.h: Likewise.
8497 * config/vax/xm-vaxult.h: Remove declaration of strdup.
8498 * config/vax/xm-vaxult2.h: Likewise.
8502 * MAINTAINERS: Add Jeff Holcomb to Write After Approval list.
8506 * target.c (target_xfer_memory_partial): Return -1 on failure due
8507 to invalid access mode attribute.
8511 * win32-nat.c (_initialize_core_win32): Prototype correctly.
8515 * config/alpha/tm-fbsd.h: Update copyright.
8516 (USE_STRUCT_CONVENTION): Define in terms of
8517 alphabsd_use_struct_convention.
8518 * config/alpha/fbsd.mt (TDEPFILES): Add alphafbsd-tdep.c.
8519 * alphafbsd-tdep.c: New file.
8523 * top.c (print_gdb_version): Update Copyright year.
8527 * dcache.c (dcache_write_line): Fix typo.
8529 * memattr.c (delete_mem_region): Replace free() with xfree().
8530 (mem_number): Add explicit type.
8532 * sol-thread.c (sol_thread_xfer_memory): Add attrib argument.
8533 (rw_common): Likewise.
8537 * infcmd.c (get_inferior_args, set_inferior_args): Accessor functions
8538 for the inferior program arguments.
8539 (run_command, run_no_args_command, init_infcmd)): Use accessor
8540 functions to set the inferior program arguments.
8541 * inferior.h: Add definitions to the accessor functions above.
8545 * dwarf2read.c (read_tag_const_type, read_tag_volatile_type):
8546 Implement these correctly, using make_cv_type.
8550 * exec.c (xfer_memory): Add attrib argument.
8551 * infptrace.c (child_xfer_memory): Likewise.
8552 * lin-lwp.c (lin_lwp_xfer_memory): Likewise.
8553 * monitor.c (monitor_xfer_memory): Likewise.
8554 * remote-adapt.c (adapt_xfer_inferior_memory): Likewise.
8555 * remote-array.c (array_xfer_memory): Likewise.
8556 * remote-bug.c (bug_xfer_memory): Likewise.
8557 * remote-e7000.c (e7000_xfer_inferior_memory): Likewise.
8558 * remote-eb.c (eb_xfer_inferior_memory): Likewise.
8559 * remote-es.c (es1800_xfer_inferior_memory): Likewise.
8560 * remote-mips.c (mips_xfer_memory): Likewise.
8561 * remote-mm.c (mm_xfer_inferior_memory): Likewise.
8562 * remote-nindy.c (nindy_xfer_inferior_memory): Likewise.
8563 * remote-os9k.c (rombug_xfer_inferior_memory): Likewise.
8564 * remote-rdi.c (arm_rdi_xfer_memory): Likewise.
8565 * remote-rdp.c (remote_rdp_xfer_inferior_memory): Likewise.
8566 * remote-sds.c (sds_xfer_memory): Likewise.
8567 * remote-sim.c (gdbsim_xfer_inferior_memory): Likewise.
8568 * remote-st.c (st2000_xfer_inferior_memory): Likewise.
8569 * remote-udi.c (udi_xfer_inferior_memory): Likewise.
8570 * remote-vx.c (vx_xfer_memory): Likewise.
8571 * remote.c (remote_xfer_memory): Likewise.
8572 * target.c (debug_to_xfer_memory, do_xfer_memory): Likewise.
8573 * target.h (child_xfer_memory, do_xfer_memory, xfer_memory): Likewise.
8574 * thread-db.c (thread_db_xfer_memory): Likewise.
8576 * target.h (#include "memattr.h"): Added.
8577 (target_ops.to_xfer_memory): Add attrib argument.
8579 * wince.c (_initialize_inftarg): Removed call to set_dcache_state.
8580 * dcache.h (set_dcache_state): Removed declaration.
8581 * dcache.c (set_dcache_state): Removed definition
8583 * dcache.c: Update module comment, as dcache is now enabled and
8584 disabled with memory region attributes instead of by the global
8585 variable "remotecache". Add comment describing the interaction
8586 between dcache and memory region attributes.
8587 (dcache_xfer_memory): Add comment describing benefits of moving
8588 cache writeback to a higher level.
8589 (dcache_struct): Removed cache_has_stuff field. This was used to
8590 record whether the cache had been accessed in order to invalidate
8591 it when it was disabled. However, this is not needed because the
8592 cache is write through and the code that enables, disables, and
8593 deletes memory regions invalidate the cache. Add comment which
8594 suggests that we could be more selective and only invalidate those
8595 cache lines containing data from those memory regions.
8596 (dcache_invalidate): Updated.
8597 (dcache_xfer_memory): Updated.
8599 (dcache_alloc): Don't abort() if dcache_enabled_p is clear.
8600 (dcache_xfer_memory): Removed code that called do_xfer_memory() to
8601 perform a uncached transfer if dcache_enabled_p was clear. This
8602 function is now only called if caching is enabled for the memory
8604 (dcache_info): Always print cache info.
8606 * target.c (do_xfer_memory): Add attrib argument.
8607 (target_xfer_memory, target_xfer_memory_partial): Break transfer
8608 into chunks defined by memory regions, pass region attributes to
8610 * dcache.c (dcache_read_line, dcache_write_line): Likewise.
8612 * Makefile.in (SFILES): Add memattr.c.
8613 (COMMON_OBS): Add memattr.o.
8614 (dcache.o): Add target.h to dependencies.
8615 * memattr.c: New file.
8616 * memattr.h: Likewise.
8618 * config/m32r/m32r.mt (GDBSERVER_LIBS): Added ../../intl/libintl.a.
8619 * config/mips/vr5000.mt (GDBSERVER_LIBS): Likewise.
8620 * config/tic80/tic80.mt (GDBSERVER_LIBS): Likewise.
8621 * gdbserver/low-sim.c (#include "defs.h"): Removed.
8622 (mygeneric_load): Rename from generic_load.
8624 * gdbserver/low-hppabsd.c (#include "server.h"): Added.
8625 (#include "defs.h"): Removed.
8626 (inferior_pid, perror_with_name): Remove declarations.
8627 * gdbserver/low-linux.c: Likewise.
8628 * gdbserver/low-nbsd.c: Likewise.
8629 * gdbserver/low-sparc.c: Likewise.
8630 * gdbserver/low-sun3.c: Likewise.
8632 * i386-stub.c: Re-indent.
8633 * m68k-stub.c: Re-indent.
8637 * gdbarch.sh (PARM_BOUNDARY): Define.
8638 * gdbarch.c: Regenerate.
8639 * gdbarch.h: Regenerate.
8643 * ns32k-tdep.c: #include "frame.h"
8644 * config/ns32k/tm-umax.h (FRAME_FIND_SAVED_REGS): Restore. It
8645 appears to have been inadvertantly removed sometime in May 1999.
8647 * Revert 2000-11-09 changes where shared library objects were
8648 moved from NATDEPFILES to TDEPFILES on NetBSD targets. While
8649 we'd like to be able to debug dynamically linked executables,
8650 this makes it impossible to build a cross debugger on a many
8653 * config/i386/nbsd.mt: Remove solib.o, solib-svr4.o from TDEPFILES.
8654 * config/i386/nbsdelf.mt: Likewise.
8655 * config/m68k/nbsd.mt: Likewise.
8656 * config/ns32k/nbsd.mt: Likewise.
8657 * config/powerpc/nbsd.mt: Likewise.
8658 * config/sparc/nbsd.mt: Likewise.
8659 * config/sparc/nbsdelf.mt: Likewise.
8660 * config/i386/nbsd.mh: Add solib.o, solib-svr4.o to NATDEPFILES.
8661 * config/i386/nbsdelf.mh: Likewise.
8662 * config/m68k/nbsd.mh: Likewise.
8663 * config/ns32k/nbsd.mh: Likewise.
8664 * config/powerpc/nbsd.mh: Likewise.
8665 * config/sparc/nbsd.mh: Likewise.
8669 * dbxread.c (read_ofile_symtab): Stay with AUTO_DEMANGLING for G++.
8670 (process_one_symbol): Likewise.
8671 * dwarfread.c (handle_producer): Likewise.
8675 * configure.in (build_warnings): Disable -Wuninitialized until GDB
8676 compiles with -Wuninitialized,-Werror.
8677 * configure: Regenerate.
8679 * MAINTAINERS: Add list of buildable targets.
8683 * defs.h (STRCMP): Delete macro.
8685 * objfiles.c (objfile_relocate): Replace STRCMP with call to
8687 * symtab.c (lookup_partial_symbol, lookup_block_symbol): Ditto.
8688 * symfile.c (compare_symbols): Ditto.
8689 * standalone.c (open): Ditto.
8690 * remote-es.c (verify_break): Ditto.
8691 * cli/cli-decode.c (add_cmd, add_show_from_set): Ditto.
8693 * symfile.c (compare_psymbols): Delete comment refering to STRCMP.
8697 * varobj.c (FREEIF): Delete macro.
8698 (varobj_set_value, free_variable): Replace FREEIF with ``xfree''
8703 * arc-tdep.c (arc_cpu_type_table): Add new arc core numbers.
8704 (arc_print_insn): No bfd available, so pass NULL to
8705 arc_get_disassembler.
8709 * symtab.c (lookup_symbol_aux): Call lookup_symbol_aux to lookup
8710 a mangled symbol rather than recursing into lookup_symbol, since
8711 this will just re-unmangle the name & call lookup_symbol_aux -
8712 leading to an infinite recursion.
8716 * infcmd.c (print_return_value): Restore another space lost by
8717 switch to UIOUT. ``$NN='' should be ``$NN =''.
8721 * target.h (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT)
8722 * breakpoint.c (TARGET_REGION_OK_FOR_HW_WATCHPOINT): Wrap macro
8723 definition in parenthesis.
8728 * remote.c (remote_remove_hw_breakpoint): Add 'len' field to Z
8730 (remote_insert_hw_breakpoint): Ditto.
8734 * config/m68k/tm-nbsd.h (USE_STRUCT_CONVENTION): Define.
8735 (BPT_VECTOR, REMOTE_BPT_VECTOR): Change to 0xf.
8736 * config/m68k/nbsd.mt (TDEPFILES): Add m68knbsd-tdep.o.
8737 * m68knbsd-tdep.c: New file.
8739 * i386nbsd-tdep.c: Remove #if 0'd out #includes.
8741 * m68knbsd-nat.c: #include gdbcore.h.
8745 * MAINTAINERS: Add J.T. Conklin to Blanket Write Privs.
8749 * procfs.c (procfs_stopped_by_watchpoint): Don't die if process
8750 goes away -- just return false (ie. not stopped by watchpoint).
8751 * source.c (openp): Fix typo in comment.
8755 * blockframe.c (generic_get_saved_register): Spelling fix.
8756 * frame.h (FRAME_FP): Spelling fix.
8760 * infcmd.c (print_return_value): Restore space lost by switch to
8761 UIOUT. ``$NN='' should be ``$NN =''.
8765 * regcache.c (set_register_cached, register_buffer,
8766 real_register, pseudo_register fetch_register, store_register):
8768 (register_changed, read_relative_register_raw_bytes_for_frame,
8769 registers_changed, registers_fetched, read_register_bytes,
8770 read_register_gen, write_register_gen, read_register,
8771 read_signed_register, write_register, supply_register): Replace
8772 register_valid[] with register_cached() and
8773 set_register_cached().
8774 (read_register_bytes, read_register_gen, write_register_gen,
8775 read_register, read_signed_register, write_register,
8776 supply_register): Replace registers[] with register_buffer().
8777 (read_register_bytes, read_register_gen, read_register,
8778 read_signed_register): Call fetch_register().
8779 (write_register_gen, write_register): Call real_register() and
8781 (write_register_bytes): Call store_register().
8782 * value.h (set_register_cached, register_buffer): Prototype.
8783 * remote.c (remote_fetch_registers): Allocate regs[] with a
8784 run-time size. Replace register_valid[] with
8785 set_register_cached().
8786 (store_register_using_P, remote_store_registers): Replace
8787 registers[] with register_buffer().
8791 * regcache.c: Change "write-back" comment to "write-through".
8792 Change "regno" to "regnum".
8793 (read_register, read_signed_register): Remove "raw" from return
8795 (supply_register): Spelling fix.
8796 * value.h: Change "regno" to "regnum".
8800 * Makefile.in (install-gdbtk): Add .itcl files to the list of files
8805 * mips-tdep.c (mips_coerce_float_to_double): Fix typo in comment.
8809 * valops.c (VALUE_SUBSTRING_START): Delete.
8813 * Makefile.in (SUBDIR_CLI_OBS): Add cli/cli-utils.o.
8814 (SUBDIR_CLI_SRCS): Add cli/cli-utils.c.
8815 (cli_utils_h): New variable.
8816 (cli/cli-utils.o): New rule.
8817 * cli/cli-utils.c: New file.
8818 * cli/cli-utils.h: New file.
8822 * config/i386/tm-i386.h (REGISTER_CONVERT_TO_VIRTUAL,
8823 REGISTER_CONVERT_TO_RAW): Delete trailing semicolon.
8827 * alphabsd-nat.c, i386-linux-nat.c, i386bsd-nat.c: Fix typo in
8832 * sh-tdep.c (sh_default_store_return_value): Allow for small return type.
8833 (sh3e_sh4_store_return_value): Call sh_default_store_return_value for
8835 * sparc-tdep.c (sparc_frame_chain): Fix typo in comment.
8836 Update copyright notice.
8838 For older changes see ChangeLog-2000
8844 version-control: never
projects / binutils.git / blob