3 * thread-db.c (enable_thread_event_reporting): Correct warning
4 message about getting thread death breakpoint.
7 * i386-tdep.c (i386_extract_return_value): "Fix" comment.
8 (i386_store_return_value): Frob FPU status and tag word to make
9 sure the return value is the only value on the FPU stack.
11 * config/tm-linux.h: Do not include <signal.h>. Instead provide
12 reasonable defaults for REALTIME_LO and REALTIME_HI if they're not
14 * config/nm-linux.h: Include <signal.h>.
15 [__SIGRTMIN] (REALTIME_LO, REALTIME_HI): Define to __SIGRTMIN and
16 (__SIGRTMAX + 1) respectively.
20 * mcore-rom.c: Include "serial.h".
21 * Makefile.in (mcore-rom.o): Depends on "serial.h".
25 * Makefile.in (remote-bug.o): Depends on serial.h.
26 * remote-bug.c: Include "serial.h".
27 * MAINTAINERS: Mark m88k target as buildable.
32 Clean up the D10V port so that GDB and the target program no
33 longer disagree on how big pointers are.
34 * findvar.c (value_from_register): Remove special case code for D10V.
35 * printcmd.c (print_frame_args): Same.
36 * valops.c (value_at, value_fetch_lazy): Same.
37 * values.c (unpack_long): Same.
38 * gdbarch.sh: Changes to effect the following:
39 * gdbarch.h (GDB_TARGET_IS_D10V, D10V_MAKE_DADDR,
40 gdbarch_d10v_make_daddr_ftype, gdbarch_d10v_make_daddr,
41 set_gdbarch_d10v_make_daddr, D10V_MAKE_IADDR,
42 gdbarch_d10v_make_iaddr_ftype, gdbarch_d10v_make_iaddr,
43 set_gdbarch_d10v_make_iaddr, D10V_DADDR_P,
44 gdbarch_d10v_daddr_p_ftype, gdbarch_d10v_daddr_p,
45 set_gdbarch_d10v_daddr_p, D10V_IADDR_P,
46 gdbarch_d10v_iaddr_p_ftype, gdbarch_d10v_iaddr_p,
47 set_gdbarch_d10v_iaddr_p, D10V_CONVERT_DADDR_TO_RAW,
48 gdbarch_d10v_convert_daddr_to_raw_ftype,
49 gdbarch_d10v_convert_daddr_to_raw,
50 set_gdbarch_d10v_convert_daddr_to_raw, D10V_CONVERT_IADDR_TO_RAW,
51 gdbarch_d10v_convert_iaddr_to_raw_ftype,
52 gdbarch_d10v_convert_iaddr_to_raw,
53 set_gdbarch_d10v_convert_iaddr_to_raw): Delete declarations.
54 * gdbarch.c: Delete the corresponding definitions.
55 (struct gdbarch): Delete members d10v_make_daddr,
56 d10v_make_iaddr, d10v_daddr_p, d10v_iaddr_p,
57 d10v_convert_daddr_to_raw, and d10v_convert_iaddr_to_raw.
58 (startup_gdbarch): Remove initializers for the above.
59 (verify_gdbarch, gdbarch_dump): Don't verify or dump them any
61 * d10v-tdep.c (d10v_register_virtual_type): Rather that
62 claiming the stack pointer and PC are 32 bits long (which they
63 aren't), say that the stack pointer is an int16_t, and the
64 program counter is a function pointer. This allows the rest
65 of GDB to make the appropriate conversions between the code
66 pointer format and real addresses.
67 (d10v_register_convertible, d10v_register_convert_to_virtual,
68 d10v_register_convert_to_raw): Delete function; no registers
69 are convertible now, so we use
70 generic_register_convertible_not instead.
71 (d10v_address_to_pointer, d10v_pointer_to_address): New gdbarch
73 (d10v_push_arguments, d10v_extract_return_value): Remove special
74 cases for code and data pointers.
75 (d10v_gdbarch_init): Set gdbarch_ptr_bit to 16, so that GDB and
76 the target agree on how large pointers are. Say that addresses
77 are 32 bits long. Register the address_to_pointer and
78 pointer_to_address conversion functions. Since no registers are
79 convertible now, register generic_register_convertible_not as the
80 gdbarch_register_convertible method instead of
81 d10v_register_convertible. Remove registrations for
82 d10v_register_convert_to_virtual,
83 d10v_register_convert_to_raw, gdbarch_d10v_make_daddr,
84 gdbarch_d10v_make_iaddr, gdbarch_d10v_daddr_p,
85 gdbarch_d10v_iaddr_p, gdbarch_d10v_convert_daddr_to_raw, and
86 gdbarch_d10v_convert_iaddr_to_raw.
88 * printcmd.c (print_scalar_formatted): If we are printing an
89 address, remember that TARGET_ADDR_BIT is not always equal to
92 * valops.c (value_cast): When casting a pointer to an integer,
93 don't convert it to an address.
97 * remote-utils.h (struct serial): Declare as opaque. Remove
98 include of "serial.h".
99 * Makefile.in (remote_utils_h): Update.
101 * monitor.h (struct serial): Declare as opaque. Remove include of
103 (struct monitor_ops): Replace serial_t with `struct serial *'.
104 * monitor.c (monitor_desc): Ditto.
108 * mips-linux-tdep.c: New file.
109 * mips-linux-nat.c: New file.
110 * config/mips/linux.mh: New file.
111 * config/mips/linux.mt: New file.
112 * config/mips/xm-linux.h: New file.
113 * config/mips/nm-linux.h: New file.
114 * config/mips/tm-linux.h: New file.
115 * configure.host: Recognize mips*-*-linux*.
116 * configure.tgt: Likewise.
117 * NEWS: Mention mips*-*-linux* port.
121 * serial.h (struct serial): Rename `struct _serial_t'.
122 * serial.c (XMALLOC): Define.
123 (serial_open): Update. Use XMALLOC.
124 (serial_fdopen): Ditto.
128 * gdbtypes.h (builtin_type_void_data_ptr): Rename
130 * gdbtypes.c (builtin_type_void_data_ptr): Update.
131 (build_gdbtypes): Update.
132 (_initialize_gdbtypes): Update.
133 * values.c (value_as_pointer): Update.
134 * utils.c (host_pointer_to_address): Update.
135 (address_to_host_pointer): Update.
139 * remote-udi.c (udi_wait): Make type, instead of name, of first
144 * ser-mac.c: Make obsolete.
145 * Makefile.in (ser-mac.o): Ditto.
149 * go32-nat.c (go32_get_windows_version, print_mem, go32_sysinfo)
150 (read_memory_region, get_descriptor, display_descriptor)
151 (go32_sldt, go32_sgdt, go32_sidt): New functions.
152 (top-level): Include ctype.h, utsname.h, dos.h, and go32.h. Ifdef
153 away `disable' from dos.h, since breakpoint.h defines an enum
154 member of the same name, and GCC 2.7.2 barfs.
155 (_initialize_go32_nat): Provide new commands dos-sysinfo, dos-ldt,
156 dos-gdt, and dos-idt, all of them in the "info" class
160 * procfs.c (create_procinfo): Allocate space for saved_entryset
162 (destroy_one_procinfo): Free space allocated to saved_entryset
167 * TODO (5.1): Update.
171 * symtab.c (main_name): New function.
172 (set_main_name): New function.
177 * dbxread.c (process_one_symbol): Handle the N_MAIN stab by
179 * blockframe.c (inside_main_func): Use main_name instead of
181 * symtab.c (find_main_psymtab): Ditto.
182 * source.c (select_source_symtab): Ditto.
183 * nlmread.c (nlm_symfile_read): Ditto.
184 * rs6000-tdep.c (skip_prologue): Ditto.
188 * TODO: Convert most items into PRs.
192 * lin-lwp.c (status_to_str): New function.
193 (lin_lwp_wait): Use it to print debug messages where appropriate.
197 * i387-tdep.c (print_i387_value): Fix pointer glitch.
201 * lin-lwp.c (count_events_callback): Fix formatting. Turn check
202 commented with "paranoia" into gdb_assert.
203 (select_event_lwp_callback): Likewise.
204 (cancel_breakpoints_callback): Bail out early if LP is the event
205 LWP. Add comment about backup up breakpoints. Fix formatting and
207 (select_event_lwp): Make solely repsonsible for switching event
208 LWP. Fix formatting and remove bogus "ERROR" debug message.
209 Don't backup breakpoints from here.
210 (lin_lwp_wait): Don't touch LP->status, let select_event_lwp
211 handle that. Only call select_event_lwp if we're not waiting for
212 a specific LWP, i.e. when PID == -1. Backup breakpoints from here.
216 * procfs.c (procfs_resume): Silence noisy warning.
220 * lin-lwp.c: Prevent thread starvation by using a monte carlo
221 method to choose which of several event threads to handle next.
223 (stop_wait_callback): Defer pushback of breakpoint events until
224 later; add SIGTRAP events to the queue of unhandled events.
225 Keep calling waitpid until SIGSTOP retrieved. If more than one
226 non-SIGSTOP event is retrieved, push them back onto the process
228 (count_events_callback, select_singlestep_lwp_callback,
229 select_event_lwp_callback, cancel_breakpoints_callback,
230 select_event_lwp): New functions. Implement monte carlo method
231 for selecting which of several SIGTRAP threads to handle next.
232 Push back the breakpoint event for all threads other than the
234 (lin_lwp_wait): Call select_event_lwp to decide which of several
235 sigtrapped lwps to handle next.
236 (resume_callback): Disable code that attempts to handle
237 step_resume breakpoints. Let core gdb handle this.
241 * gdbtypes.h (builtin_type_void_func_ptr): New builtin type.
242 * gdbtypes.c (builtin_type_void_func_ptr): Define the variable.
243 (build_gdbtypes): Initialize it.
244 (_initialize_gdbtypes): Swap it.
248 * mips-tdep.c (mips32_op): Correct offset.
249 (itype_op): Likewise.
250 (itype_rs): Fix formatting.
251 (itype_immediate): Fix formatting.
252 (jtype_op): Correct offset.
253 (jtype_target): Fix formatting.
254 (rtype_op): Correct offset.
255 (rtype_rs): Fix formatting.
256 (rtype_rt): Likewise.
257 (rtype_rd): Likewise.
258 (rtype_shamt): Likewise.
259 (rtype_funct): Likewise.
261 (mips32_next_pc): Fix formatting and comments. Recognize
262 coprocessor 1 branches. Check the correct field for BLT family
263 branches. Use itype_rt instead of itype_rs for the second register
264 of a BNE or BNEL branch. Move (unreachable) default case.
268 * ui-out.h (struct ui_out_impl): Add field is_mi_like_p.
269 (ui_out_is_mi_like_p): Declare.
270 * ui-out.c (ui_out_is_mi_like_p): Define.
271 (default_ui_out_impl): Initialize is_mi_like_p to zero.
272 * cli-out.c (cli_ui_out_impl): Ditto.
273 * breakpoint.c (print_it_typical): Use ui_out_is_mi_like_p.
274 (watchpoint_check, print_one_breakpoint, mention): Ditto.
275 * infrun.c (print_stop_reason, normal_stop): Ditto.
279 * mips-tdep.c (mips_software_single_step): New function.
280 * config/mips/tm-mips.h: Add prototype for
281 mips_software_single_step.
285 * ppc-linux-nat.c (supply_gregset): Use elf_greg_t instead
287 (fill_gregset): Likewise.
291 * objfiles.c (open_mapped_file): Use lbasename instead of
296 * d10v-tdep.c (d10v_frame_chain, d10v_frame_init_saved_regs,
297 show_regs, d10v_read_pc, d10v_write_pc, d10v_read_sp,
298 d10v_write_sp, d10v_write_fp, d10v_read_fp,
299 d10v_push_return_address): Call the functions d10v_make_daddr,
300 d10v_make_iaddr, d10v_convert_iaddr_to_raw, and
301 d10v_convert_daddr_to_raw, not the global macros D10V_MAKE_DADDR,
302 D10V_MAKE_IADDR, D10V_CONVERT_IADDR_TO_RAW, and
303 D10V_CONVERT_DADDR_TO_RAW.
305 * dwarf2read (dwarf2_build_psymtabs_hard): Doc fix.
309 * config/i386/xm-go32.h (HOST_I386): Removed.
310 * config/i386/xm-linux.h (HOST_I386): Removed.
314 * i387-tdep.c (print_i387_value): Add extra space after final full
319 * TODO (5.1): Update. Doco changes committed.
323 * config/arm/tm-arm.h: Include "floatformat.h".
327 * i387-tdep.c: Include "gdb_assert.h".
328 (print_i387_value): Use extract_floating to extract the FP value
329 from a zero padded local buffer.
333 * TODO: Delete all thread items. The thread code was overhauled.
337 * memattr.c (create_mem_region): Move n to next memory region,
338 to avoid infinite loop.
340 * memattr.h: Add copyright statement.
345 * dwarf2read.c (struct partial_die_info): New member: has_pc_info.
346 (read_partial_die): Delete fourth argument; we return this info in
347 the struct partial_die_info object itself now.
348 (dwarf2_build_psymtabs_hard, scan_partial_symbols): Use the
349 has_pc_info field of the partial die struct, rather than passing a
350 variable by reference to read_partial_die.
352 * dwarf2read.c (dwarf2_build_psymtabs_hard): Remove extraneous
353 code in loop condition.
357 * thread_db (find_new_threads_callback, thread_db_thread_alive,
358 attach_thread): Update comments.
362 * thread-db.c (attach_thread): Check for TD_THR_ZOMBIE in addition
363 to TD_THR_UNKNOWN when looking for defunct zombie threads.
364 (thread_db_thread_alive): Ditto.
365 (find_new_threads_callback): Ditto.
369 * MAINTAINERS: Add myself to the write-after-approval list.
373 * solib-svr4.c: Include "elf/mips.h".
374 (elf_locate_base): Make DT_MIPS_RLD_MAP block unconditional.
378 * dwarf2read.c (read_comp_unit, sibling_die, dump_die,
379 dump_die_list, store_in_ref_table, follow_die_ref): Make these
380 static; they're private functions.
384 * coffread.c (coff_symfile_read): Parse DWARF2 info if present.
388 * TODO: Add import of readline 4.2 as a gdb 5.2 task.
392 * config/djgpp/fnchange.lst: Sort.
396 * config/djgpp/fnchange.lst: Rename mi0-var-block.exp,
397 mi0-var-cmd.exp, mi0-var-child.exp and mi0-var-display.exp.
401 * MAINTAINERS: Add myself to the write-after-approval list.
405 * remote-array.c (SWAP_TARGET_AND_HOST): Delete macro.
406 (get_hex_word): Don't use HOST_BYTE_ORDER.
407 (array_fetch_registers): Add variable ``reg''. Use
408 store_unsigned_integer to byte-swap the register. Delete unused
413 * MAINTAINERS: Add Per Bothner to Java maintainers.
417 * rdi-share/unixcomm.c (SERIAL_PREFIX): Always provide a default.
418 * rdi-share/hostchan.h (__unix): Hack, provide a default value.
419 * rdi-share/host.h (__unix): Hack, define when __NetBSD__.
421 * MAINTAINERS: Update. arm-elf builds.
425 * d10v-tdep.c (d10v_ts2_dmap_register): Doc fix.
427 * d10v-tdep.c (d10v_frame_chain_valid, d10v_use_struct_convention,
428 d10v_breakpoint_from_pc, d10v_register_byte,
429 d10v_register_raw_size, d10v_register_virtual_size,
430 d10v_register_virtual_type, d10v_register_convertible,
431 d10v_register_convert_to_virtual, d10v_register_convert_to_raw,
432 d10v_make_daddr, d10v_make_iaddr, d10v_daddr_p, d10v_iaddr_p,
433 d10v_convert_iaddr_to_raw, d10v_convert_daddr_to_raw,
434 d10v_store_struct_return, d10v_store_return_value,
435 d10v_extract_struct_value_address, d10v_frame_saved_pc,
436 d10v_saved_pc_after_call, d10v_pop_frame, d10v_skip_prologue,
437 d10v_frame_chain, d10v_frame_init_saved_regs,
438 d10v_init_extra_frame_info, d10v_read_pc, d10v_write_pc,
439 d10v_read_sp, d10v_write_sp, d10v_write_fp, d10v_read_fp,
440 d10v_push_return_address, d10v_push_arguments,
441 d10v_extract_return_value): Make these functions static.
445 From Fernando Nasser:
446 * infrun.c (handle_inferior_event): Handle "nexti" inside function
451 * infrun.c (handle_inferior_event): Replace prev_pc test in all
452 calls to bpstat_stop_status (removed in 1999-09-24). This test
453 helps distinguish stepping over a breakpoint trap from stepping
454 thru a jump to the instruction after a breakpoint trap.
455 (handle_inferior_event): Don't bother writing the PC if
456 DECR_PC_AFTER_BREAK is zero (optimization).
457 * breakpoint.c (bpstat_stop_status): Add comment explaining the
458 purpose and usage of the "not_a_breakpoint" argument in computing
459 the breakpoint address.
464 * monitor.c (setmem_resp_delim_pattern): New regexp pattern.
465 (setreg_resp_delim_pattern): Likewise.
466 (setmem_resp_delim_fastmap): New buffer.
467 (setreg_resp_delim_fastmap): Likewise.
468 (monitor_open): Initialize above regexp if they are defined.
469 (monitor_write_memory): Use regexp to check the result of write.
470 (monitor_store_register): Likewise to check result of register set.
475 * coff-solib.c: Include symfile.h and objfiles.h to make
480 * configure.in (--enable-gdbmi): Enable by default.
481 * configure: Regenerate.
487 * solib-osf.c (osf_in_dynsym_resolve_code): Add a comment
488 explaining the consequences of always returning zero. No code
494 * defs.h (enum target_signal): Add TARGET_SIGNAL_REALTIME_65
495 to TARGET_SIGNAL_REALTIME_127.
496 * target.c (struct signals): Add SIG63 to SIG127.
497 (target_signal_from_host): Handle up to 127 signals.
498 (do_target_signal_to_host): Likewise.
502 * remote-sds.c (sds_start_remote): Change type of ``c'' to int
503 from possibly unsigned char.
507 * ser-ocd.c: Delete file.
508 * Makefile.in (ALLDEPFILES): Remove ser-ocd.c
509 (ser-ocd.o): Delete target.
515 * MAINTAINERS (Write After Approval): Sort.
516 (Past Maintainers): Daniel Berlin stepped down as C++ maintainer.
520 * breakpoint.c (breakpoint_1): Always output the breakpoint
521 headings. Leave it to ui-out to decide which
525 * stack.c (print_frame): For ui_out, output a list of arguments.
529 * MAINTAINERS (paper trail): Update.
533 * infrun.c: Eliminate the "thread_step_needed" state variable,
534 and replace it with a relatively simple test in resume.
535 (resume): Replace thread_step_needed logic with a test for
536 stepping, breakpoint_here_p and breakpoints_inserted.
537 Move CANNOT_STEP_BREAKPOINT logic to after thread_step logic.
538 (proceed): Discard thread_step_needed logic.
539 (wait_for_inferior, fetch_inferior_event, handle_inferior_event):
540 Discard thread_step_needed logic.
544 * remote-rdi.c (arm_rdi_wait): Fix return type in prototype.
545 * rdi-share/host.h: Add missing parenthesis in conditional.
549 * configure.in: include nlist.h when checking for member som_addr
551 * configure: regenerate.
555 * cli-out.c (cli_out_new): Initialize new structure member
560 * ui-out.h (ui_out_table_header): Add parameter ``col_name''.
561 (table_header_ftype): Ditto.
562 * cli-out.c (cli_table_header): Update.
563 * ui-out.c (ui_out_table_header): Update.
564 (uo_table_header): Update.
565 (default_table_header): Update.
566 (append_header_to_list): Update.
567 (struct ui_out_header): Add field ``col_name''.
568 (append_header_to_list): Use xstrdup. Initialize col_name.
569 * breakpoint.c (breakpoint_1): Pass COL_NAME to
574 * cli-out.c: Include "gdb_assert.h'.
575 (struct ui_out_data): Add field ``suppress_output.
576 (cli_table_begin): When NR_ROWS is zero, suppress_output.
577 (cli_table_end): Clear suppress_output.
578 (cli_table_body): Check suppress_output.
579 (cli_table_header, cli_begin): Ditto.
580 (cli_end, cli_field_int, cli_field_skip): Ditto.
581 (cli_field_string, cli_field_fmt, cli_spaces): Ditto.
582 (cli_text, cli_message, cli_wrap_hint): Ditto.
583 * breakpoint.c (breakpoint_1): Close the ui_out table before
584 printing the breakpoint not found message.
588 * ui-out.c (ui_out_table_begin): Add parameter ``nr_rows''.
589 (default_table_begin): Ditto.
590 (uo_table_begin): Ditto.
591 * cli-out.c (cli_table_begin): Ditto.
592 * ui-out.h (ui_out_table_begin): Update
593 (table_begin_ftype): Update.
594 * breakpoint.c (breakpoint_1): Pass nr_printable_breakpoints to
599 * breakpoint.c (breakpoint_1): Restructure. Compute the
600 nr_printable_breakpoints. Move the header output to before the
601 main print breakpoints loop.
602 (user_settable_breakpoint): New function.
606 * infrun.c, breakpoint.c: Use strncmp as the "mi" test. Allow,
607 "mi", "mi0" and "mi1".
611 * gdbarch.sh: Generate an error when conflicting macro
612 definitions. Generate an error when both pure multi-arch and
614 * gdbarch.h, gdbarch.c: Regenerate.
615 * defs.h (GDB_MULTI_ARCH_TM): Rewrite definition.
619 * config/sparc/tm-sun4sol2.h (GDB_MULTI_ARCH): Down grade to
620 GDB_MULTI_ARCH_PARTIAL from two.
625 * cli/cli-script.c (free_command_lines): Reset list pointer.
629 * arch-utils.c (init_frame_pc_default): New function
630 * arch-utils.h (init_frame_pc_default): Declare.
631 * gdbarch.sh (INIT_FRAME_PC): Default to init_frame_pc_default and
632 not init_frame_pc_noop.
633 * gdbarch.h, gdbarch.c: Re-generate.
634 * blockframe.c (INIT_FRAME_PC): Delete macro definition.
635 * mips-tdep.c (mips_gdbarch_init): Set init_frame_pc to
640 * gdbarch.c: Regenerate. Out-of-sync with gdbarch.sh.
644 * gdbarch.sh (CANNOT_FETCH_REGISTER): Multi-arch.
645 (CANNOT_STORE_REGISTER): Ditto.
646 * infptrace.c (CANNOT_FETCH_REGISTER): Delete definition.
647 (CANNOT_STORE_REGISTER): Ditto.
648 * regcache.c (CANNOT_STORE_REGISTER): Ditto.
649 * lynx-nat.c (CANNOT_STORE_REGISTER): Ditto.
650 * arch-utils.h (cannot_register_not): Define.
651 * arch-utils.c (cannot_register_not): Declare.
655 * gdbarch.sh: Clarify pre/post default
656 (INIT_FRAME_PC_FIRST, INIT_FRAME_PC): Multiarch.
657 * blockframe.c (get_prev_frame): Remove #ifdef from around
658 INIT_FRAME_PC_FIRST call.
659 * arch-utils.c (init_frame_pc_noop): Define.
660 * arch-utils.h (init_frame_pc_noop): Declare.
661 * config/mips/tm-mips.h (INIT_FRAME_PC_FIRST): Delete.
662 (INIT_FRAME_PC, mips_init_frame_pc_first): Ditto.
663 * mips-tdep.c (mips_init_frame_pc_first): Make static.
664 (mips_gdbarch_init): Initialize init_frame_pc_first.
665 (mips_dump_tdep): Update.
669 * infrun.c (context_switch): New function. Abstract the operation
670 of saving and restoring infrun's state when switching threads.
671 (handle_inferior_event): Normalize the handling of the 'thread hop'
672 event (when the wrong thread hits a thread-specific breakpoint,
673 and we need to solo-step that thread past the breakpoint).
674 Call keep_going, instead of target_resume. Handle the subsequent
675 singlestep-trap as a normal event instead of just resuming.
679 * arch-utils.c (core_addr_identity): New function. Rename
680 default_convert_from_func_ptr_addr.
681 * gdbarch.sh (CONVERT_FROM_FUNC_PTR_ADDR): Update.
682 (ADDR_BITS_REMOVE): Define. Default to core_addr_identity.
683 * defs.h (ADDR_BITS_REMOVE): Delete macro definition.
684 * config/mips/tm-mips.h (ADDR_BITS_REMOVE): Delete definition.
685 * mips-tdep.c (mips_addr_bits_remove): Make static.
686 (mips_gdbarch_init): Initialize addr_bits_remove.
691 * configure.tgt: Add S/390 31 & 64 bit target configuration.
692 * configure.host: Ditto for host.
696 * gdbarch.sh (EXTRACT_STRUCT_VALUE_ADDRESS_P): Delete definition.
697 (EXTRACT_STRUCT_VALUE_ADDRESS): Change to a function with
699 * gdbarch.h, gdbarch.c: Regenerate.
700 * values.c (value_being_returned): Change the reference to
701 EXTRACT_STRUCT_VALUE_ADDRESS_P to a function call.
705 * MAINTAINERS: Add Paul Hilfinger and Joel Brobecker to the
706 Write After Approval list.
710 * remote.c (show_remote_protocol_qSymbol_packet_cmd,
711 set_remote_protocol_qSymbol_packet_cmd): New functions.
712 (init_all_packet_configs, show_remote_cmd): Add qSymbol packet.
713 (remote_check_symbols): New function. Implement qSymbol packet,
714 allowing target to request symbol lookup service from gdb.
715 (remote_open_1, remote_async_open_1): Call remote_check_symbols,
716 allowing symbol lookup from exec_bfd on connection to target.
717 (remote_new_objfile): New function. Catch new objfile notifications
718 from shared library module, and call remote_check_symbols.
719 (_initialize_remote): Hook remote_new_objfile into the shared
720 library notification chain. Add "set remote symbol-lookup" command.
724 * tracepoint.c (trace_command): We now have tracepoint
725 events. Get rid of those ugly hooks.
726 (tracepoint_operation): Likewise.
727 (trace_pass_command): Likewise.
731 * gdbthread.h (struct thread_info): Add new fields:
732 current_line, current_symtab, step_sp, for saved infrun state.
733 * thread.c (save_infrun_state, load_infrun_state): Save and
734 restore current_line, current_symtab, and step_sp.
735 (add_thread): Rather than adding assignments to initialize
736 the new fields, just use memset (tp, 0, sizeof (*tp).
737 This way future new fields will not be overlooked.
738 * infrun.c (handle_inferior_event): Save and restore save_sp,
739 current_line, and current_symtab when switching threads.
743 * MAINTAINERS: Add Andrew Cagney as co-maintainer of
748 * symtab.c (lookup_symtab_1): Replace basename with lbasename.
749 (lookup_partial_symtab, file_matches): Ditto.
750 (make_source_files_completion_list): Ditto.
751 (make_file_symbol_completion_list): Ditto. Make local char*
752 variable ``tail'' constant.
753 (make_source_files_completion_list): Ditto with ``base_name''.
754 * source.c (open_source_file): Use lbasename. Make ``p'' const
759 * config/i386/xm-go32.h (SLASH_P, ROOTED_P, SLASH_CHAR)
760 (SLASH_STRING): Remove unised definitions.
761 * config/i386/xm-cygwin.h: Likewise.
765 * ui-out.c (ui_out_list_begin): Add parameter ``id''.
766 (make_cleanup_ui_out_list_begin_end): Ditto. Open the list.
767 * ui-out.h: Update declarations.
771 * source.c (openp): Make parameters ``path'' and ``string''
773 (openp): Use alloca to safely duplicate ``string''. Make local
774 variables ``p'' and ``p1'' constant. Delete char* casts.
777 * symtab.c (lookup_symtab_1): Make parameter ``name'' constant.
778 (lookup_symtab, lookup_partial_symtab): Ditto.
779 * symtab.h (lookup_symtab, lookup_partial_symtab): Update.
783 * ui-out.h (ui_out_table_begin): Make char* parameters constant.
784 (ui_out_table_header, ui_out_field_int): Ditto.
785 (ui_out_field_core_addr, ui_out_field_string): Ditto.
786 (ui_out_field_stream, ui_out_field_fmt): Ditto.
787 (ui_out_field_skip, ui_out_text, ui_out_message): Ditto.
788 * ui-out.c (ui_out_table_begin, ui_out_table_header): Update.
789 (ui_out_field_core_addr, ui_out_field_stream): Update.
790 (ui_out_field_string, ui_out_field_fmt): Update.
791 (ui_out_text, ui_out_message): Update.
792 (append_header_to_list): Make char* parameters constant.
793 (uo_table_header, uo_table_begin): Ditto.
794 (uo_field_int, uo_field_skip): Ditto.
795 (uo_field_string, uo_field_fmt): Ditto.
796 (uo_text, uo_message): Ditto.
800 * completer.c (gdb_completer_loc_break_characters): New variable.
801 (line_completion_function): If we are completing on locations,
802 back up the start of word pointer past all characters which can
803 appear in a location spec.
804 (location_completer): New function.
806 * completer.h: Add prototype for location_completer.
808 * symtab.c (make_source_files_completion_list)
809 (add_filename_to_list, not_interesting_fname): New functions.
810 (filename_seen): New function, body extracted from
811 output_source_filename.
812 (output_source_filename): Call filename_seen to check if the file
814 (make_symbol_completion_list): If TEXT includes a
815 double-quoted string, return an empty list, not NULL.
816 (make_file_symbol_completion_list): New function, similar to
817 make_symbol_completion_list but with an additional argument
820 * symtab.h (make_file_symbol_completion_list)
821 (make_source_files_completion_list): Add prototypes.
823 * breakpoint.c (_initialize_breakpoint): Make location_completer
824 be the completion function for all commands which set breakpoints
826 (top-level): #include "completer.h".
828 * tracepoint.c (_initialize_tracepoint): Make location_completer
829 be the completion function for the "trace" command.
830 (top-level): #include "completer.h".
832 * printcmd.c (_initialize_printcmd): Make location_completer be
833 the completion function for the "print", "inspect", "call", and
834 "disassemble" commands.
835 (top-level): #include "completer.h".
837 * infcmd.c (_initialize_infcmd): Make location_completer be the
838 completion function for the "go", "jump", and "until" commands.
839 (top-level): #include "completer.h".
843 * gnu-regex.c: Eliminate obsolete check for _MSC_VER.
844 * utils.c (notice_quit): Remove dummy function only used for _MSC_VER.
845 * values.c (unpack_double): Remove obsolete check for _MSC_VER.
849 * ser-e7kpc.c: Ditto. Define WIN32_LEAN_AND_MEAN under _WIN32, for
851 (get_ds_base): Remove _MSC_VER version of this function.
852 * nindy-share/ttyflush.c: Ditto.
853 * rdi-share/host.h: Ditto.
854 * ser-go32.c (dos_readchar): Remove call to obsolete function.
855 * remote-sim.c (gdb_os_poll_quit): Ditto.
856 * remote-e7000.c (expect): Remove obsolete #if 0'ed code.
858 * main.c (captured_main): Eliminate special Cygwin checks.
859 * ser-tcp.c: Remove unneeded __CYGWIN__ guard against system include.
863 * Makefile.in (gdbcmd_h): Add ui_out_h.
864 (breakpoint.o, infcmd.o, main.o, printcmd.o, stack.o): Ditto.
865 (thread.o, top.o): Ditto.
867 * ui-out.h (table_begin_ftype): Make string parameters constant.
868 (table_header_ftype): Ditto.
869 (field_int_ftype): Ditto.
870 (field_skip_ftype): Ditto.
871 (field_string_ftype): Ditto.
872 (field_fmt_ftype): Ditto.
874 (message_ftype): Ditto.
875 * cli-out.c (cli_table_begin): Ditto.
876 (cli_table_header): Ditto.
877 (cli_field_int): Ditto.
878 (cli_field_skip): Ditto.
879 (cli_field_string): Ditto.
880 (cli_field_fmt): Ditto.
882 (cli_message): Ditto.
883 (out_field_fmt): Ditto.
884 * ui-out.c (default_table_begin): Ditto.
885 (default_table_header): Ditto.
886 (default_field_int): Ditto.
887 (default_field_skip): Ditto.
888 (default_field_string): Ditto.
889 (default_field_fmt): Ditto.
890 (default_text): Ditto.
891 (default_message): Ditto.
895 * breakpoint.c (delete_breakpoint): Pass mark_inserted to
896 remove_breakpoint, so that the subsequent test for
897 bpt->inserted will succeed, and duplicates will be fixed up.
901 * dwarf2read.c (set_cu_language): Handle DW_LANG_Java.
905 * tracepoint.c (tracepoint_opertation): Add ui event
907 (trace_pass_command): Ditto.
911 * MAINTAINERS (Write After Approval): Note the entry criteria.
912 (HP/PA): Jeff Law stepped down
916 * gdbarch.sh: Make sure that '[' doesn't interpret interesting
917 variable values as operators.
921 * gdb-events.sh: Fix quote escaping which was obsoleted
926 * gdb-events.sh: Make if statements and tests
927 a little more portable.
928 Don't use shell's echo command to put strings containing
929 escaped characeters into a file -- different flavors of /bin/sh
930 require differnt levels of escaping. Use cat <<EOF instead.
931 Our internal field separator is a colon. Change all
932 commands which assume it is a space.
936 * lin-lwp.c (struct lwp_info): Add member `resumed'.
937 (iterate_over_lwps): Make sure we can handle CALLBACK deleting the
939 (lin_lwp_attach): Mark LWP as resumed to make sure the fake
941 (resume_clear_callback): New function.
942 (resume_set_callback): New function.
943 (lin_lwp_resume): Mark all LWP's that we're going to resume as
944 resumed, and unmark all others.
945 (status_callback): Only report a pending wait status if we pretend
946 that LP has been resumed.
947 (resumed_callback): New function.
948 (lin_lwp_wait): Add assertions to check that LWP's are properly
949 marked as resumed. Partially revert 2001-05-25 patch by Michael
950 Snyder: do not resume all threads. Add comment explaining the
951 problems associated with this bit of code.
955 * MAINTAINTERS: Syd Polk is stepping down from
956 maintaining libgui. I am replacing him.
960 * config/mips/tm-irix6.h: New file.
962 * config/mips/irix6.mh: New file.
964 * config/mips/irix6.mt: New file.
966 * config/mips/xm-irix6.h: New file.
968 * config/mips/nm-irix6.h: New file.
970 * mips-tdep.c (mips_gdbarch_init) <MIPS_ABI_N32>: Set up the
971 disassembler info in tm_print_insn_info as appropriate for the N32
972 ABI. Force N32 ABI to be the default if the CPU is R8000 or
975 * configure.tgt (mips*-sgi-irix6*): Map to irix6.
977 * configure.host (mips*-sgi-irix6*): Ditto.
981 * gnu-v3-abi.c: Include "gdb_assert.h".
982 (build_gdb_vtable_type): Replace abort() with gdb_assert().
986 * cp-abi.h: Rearrange code to put documentation comments above the
987 functions we export. The actual function table itself simply
988 refers to those functions. Minor doc fixes.
990 * gdbarch.sh: Changes to effect the following:
991 * gdbarch.c (initialize_non_multiarch): New function.
992 * gdbarch.h (initialize_non_multiarch): New declaration.
993 * arch-utils.c (initialize_current_architecture): For
994 non-multiarch configurations, call initialize_non_multiarch.
998 * symfile.c (compare_psymbols): Replace PTR with void*. Delete
1000 (compare_symbols): Ditto.
1004 * arch-utils.c (generic_prepare_to_proceed): Allow for having
1005 stopped due to a Ctrl-C as well as breakpoints.
1007 * hppa-tdep.c (hppa_prepare_to_proceed): Add FIXME as this may not
1008 support thread switches after Ctrl-C.
1009 * lin-lwp.c (lin_lwp_prepare_to_proceed): Ditto.
1010 * linux-thread.c (linuxthreads_prepare_to_proceed): Ditto.
1011 * m3-nat.c (mach3_prepare_to_proceed): Ditto.
1015 * gdbarch.sh, gdbarch.c: Revert change of 2001-06-01; all
1016 per-architecture data should be registered at initialization time,
1017 before any gdbarch objects get used, so the generality is
1022 * gdb-events.sh (function_list): Add tracepoint_create,
1023 tracepoint_delete, and tracepoint_modify events.
1024 * gdb-events.c: Regenerated.
1025 * gdb-events.h: Regenerated.
1029 * gdb-events.sh: Update copyrights.
1030 Change free to xfree.
1031 * gdb-events.c: Regenerated.
1032 * gdb-events.h: Regenerated.
1036 * source.c (mod_path, openp): Use #ifdef HAVE_DOS_BASED_FILE_SYSTEM
1037 instead of #if HAVE_DOS_BASED_FILE_SYSTEM.
1038 * completer.c: Ditto.
1039 * cli/cli-cmds.c (cd_command): Ditto.
1043 * mips-tdep.c (show_mipsfpu_command): Remove unused variable msg.
1044 (mips_set_processor_type_command): Remove unused variable j.
1045 (mips_breakpoint_from_pc): Declare breakpoint instruction
1046 sequences as unsigned char, to avoid compiler warnings.
1048 * source.c (mod_path, openp): Use HAVE_DOS_BASED_FILE_SYSTEM
1049 instead of system-specific define's like _WIN32 and __MSDOS__.
1050 Use IS_DIR_SEPARATOR and IS_ABSOLUTE_PATH instead of SLASH_P and
1052 (top-level): #include "filenames.h".
1054 * solib.c (solib_open): Use IS_DIR_SEPARATOR and IS_ABSOLUTE_PATH
1055 instead of SLASH_CHAR, ROOTED_P and SLASH_P.
1056 (top-level): #include "filenames.h".
1058 * defs.h (SLASH_P, SLASH_CHAR, ROOTED_P): Remove definitions.
1059 (SLASH_STRING): Define only for _WIN32.
1061 * completer.c: Use HAVE_DOS_BASED_FILE_SYSTEM instead of
1064 * cli/cli-cmds.c (cd_command): Use IS_DIR_SEPARATOR and
1065 IS_ABSOLUTE_PATH instead of SLASH_P and ROOTED_P. Replace
1066 system-specific ifdefs with HAVE_DOS_BASED_FILE_SYSTEM.
1067 (top-level): #include "filenames.h".
1069 * go32-nat.c (go32_wait): Change the return value to ptid_t.
1071 * config/djgpp/fnchange.lst: Add two new files in the
1072 gdb/testsuite/gdb.c++/ directory to the remapped names.
1074 * config/djgpp/djconfig.sh (lt_cv_sys_max_cmd_len): Set to 12KB.
1078 Expand the gdbarch per-architecture data vector as needed, rather
1079 than requiring that all per-architecture data be registered before
1080 the first gdbarch object is allocated.
1081 * gdbarch.sh: Changes to effect the following:
1082 * gdbarch.c (alloc_gdbarch_data, init_gdbarch_data): Delete
1083 declarations and definitions.
1084 (check_gdbarch_data): New function, and declaration.
1085 (gdbarch_alloc): Don't call alloc_gdbarch_data; leaving the fields
1086 zero is good enough.
1087 (free_gdbarch_data): Tolerate a null data pointer. Free only
1088 those data items gdbarch->data actually has allocated.
1089 (set_gdbarch_data, gdbarch_data): Call check_gdbarch_data.
1090 (gdbarch_update_p): No need to call init_gdbarch_data.
1094 * ia64-tdep.c (is_float_or_hfa_type_recurse): Call check_typedef()
1095 on types that we wish to recurse on.
1096 (slot_alignment_is_next_even): New function.
1097 (ia64_push_arguments): Call slot_alignment_is_next_even() to
1098 examine the type in order to decide if it's necessary to skip
1103 * thread.c (delete_step_resume_breakpoint): New function.
1104 Maintain internal consistency of the thread list while deleting
1105 a step_resume_breakpoint.
1106 * gdbthread.h (delete_step_resume_breakpoint): Export.
1107 * breakpoint.c (bpstat_find_step_resume_breakpoint):
1108 Make thread-aware: don't return a step_resume_breakpoint
1109 for the wrong thread.
1110 * infrun.c (wait_for_inferior): Call delete_step_resume_breakpoint
1111 instead of delete_breakpoint_current_contents.
1112 (fetch_inferior_event): Ditto.
1113 (handle_inferior_event): Call delete_step_resume_breakpoint
1114 instead of delete_breakpoint.
1115 * infrun.c (handle_inferior_event): After singlestepping over a
1116 thread-specific breakpoint, use currently_stepping() to decide
1117 whether to step or continue.
1121 * gnu-v3-abi.c (gnu_v3_abi_ops, vtable_type_gdbarch_data): Make
1122 these static --- there's no reason other files should use these.
1124 * partial-stab.h (case N_FUN: case 'f':, case N_FUN: case 'F':)
1127 * partial-stab.h: New complaint: function_outside_compilation_unit.
1128 (case N_FUN: case 'f':, case N_FUN: case 'F':): If pst is zero,
1129 complain, and don't try to set pst's start address.
1133 * ia64-linux-tdep.c (IA64_LINUX_SIGCONTEXT_OFFSET): Revise to
1134 match the location at which the kernel is placing the sigcontext
1137 * ia64-tdep.c (max_skip_non_prologue_insns): New static global.
1138 (refine_prologue_limit): New function.
1139 (examine_prologue): Further limit number of instructions
1140 scanned by calling refine_prologue_limit(). Revise way in
1141 which the end of prologue address is computed for frameless
1146 * partial-stab.h: Revert previous patch.
1150 * partial-stab.h: Consistently guard against pst being NULL.
1154 * symfile.c (compare_psymbols, compare_symbols): Declare using
1155 PTR, as in the definition.
1156 * minsyms.c (compare_minimal_symbols): Likewise.
1157 * coffread.c (find_targ_sec): Likewise.
1158 * elfread.c (free_elfinfo, elf_locate_sections): Likewise.
1159 * mipsread.c (alphacoff_locate_sections): Likewise.
1160 * mdebugread.c (compare_blocks): Likewise.
1164 * solib.c (update_solib_list): Move target_resize_to_sections()
1165 into solib_map_sections() loop.
1166 (info_sharedlibrary_command): Try bfd_arch_bits_per_address() if
1167 bfd_get_arch_size() fails.
1171 * Makefile.in (osfsolib.c, osfsolib.o): Rename to solib-osf.c and
1173 * config/alpha/alpha-osf1.mh (NATDEPFILES): Replace osfsolib.o
1174 with solib-osf.o and solib.o.
1175 * config/alpha/alpha-osf2.mh: Likewise.
1176 * config/alpha/alpha-osf3.mh: Likewise.
1177 * solib-osf.c: New file, renamed and largely rewritten from
1182 * lin-lwp.c (lin_lwp_attach_lwp): Call stop_wait_callback,
1183 to consume the SIGSTOP generated by PTRACE_ATTACH.
1184 (stop_wait_callback): If a SIGTRAP or a SIGINT event is consumed,
1185 try again to get the SIGSTOP event.
1186 (lin_lwp_wait): Resume all threads when ignoring a signal.
1187 This will insure that newly attached threads get resumed.
1188 * lin-lwp.c (stop_wait_callback): Discard redundant SIGINT events.
1189 * remote.c (remote_write_bytes): Update 'p' packet pointer.
1193 * gnu-v2-abi.c (gnuv2_virtual_fn_field): There's no need to clear
1194 VALUE_POINTED_TO_OFFSET here; if value_cast doesn't return a
1195 useful value, then we should fix that instead.
1199 * solist.h (struct so_list): Document the requirement that
1200 current_sos initialize some fields to 0.
1204 * gnu-nat.c: Include <ctype.h>.
1205 (gnu_pid_to_exec_file): Add PID parameter.
1206 (set_sig_thread_cmd): Use PIDGET on return value from
1208 (proc_string): Use MERGEPID to construct argument to
1213 * breakpoint.c (breakpoint_address_is_meaningful): New function.
1214 (check_duplicates): Don't compare non-meaningful addresses.
1218 * thread-db.c: Allow for defunct zombie threads.
1219 (attach_thread): Do not attempt to attach zombie thread.
1220 (thread_db_thread_alive): Return false for defunct zombie thread.
1221 (find_new_threads_callback): Don't add defunct zombie thread to list.
1225 Add support for the GNU V3 C++ ABI.
1226 (Includes changes by Dan Berlin.)
1228 * gnu-v3-abi.c: New file.
1229 * minsyms.c: #include "value.h" and "cp-abi.h".
1230 (install_minimal_symbols): Check the minimal symbol table for
1231 symbols that look mangled in the V3 style, and select the V3 ABI
1233 * Makefile.in (SFILES): Add gnu-v3-abi.c.
1234 (COMMON_OBS): Add gnu-v3-abi.o.
1235 (gnu-v3-abi.o): Add new rule.
1236 (minsyms.o): Depend on $(cp_abi_h) and $(value_h).
1240 * values.c (value_primitive_field): If we're extracting a base
1241 class, then the type of the result should be the base class being
1242 extracted, not the type of which it is a base class.
1244 * value.h (struct value): Doc fix, and rearrange members to place
1245 them near their explanations.
1249 * remote.c (remote_async_wait): Added new variable fieldsize.
1250 Add fieldsize (return value of hex2bin) to string pointer p.
1254 * m68hc11-tdep.c (m68hc11_pop_frame): Fix stack pointer computation.
1255 (m68hc11_analyze_instruction): Update the pc correctly.
1256 (m68hc11_guess_from_prologue): Take into account the stack correction
1257 for the saving address.
1261 Changes by Jim Ingham:
1263 * values.c (value_change_enclosing_type): New function. If the
1264 new enclosing type is larger than the old one, we need to allocate
1266 * value.h: Add value_change_enclosing_type prototype.
1267 * valops.c (value_cast): Use it.
1268 (value_assign): Use it.
1269 (value_addr): Use it.
1270 (value_ind): Use it.
1271 (value_full_object): Use it.
1275 * values.c (value_static_field): Handle static fields that have a
1280 * blockframe.c (create_new_frame): Zero all the fields via memset,
1281 rather than zeroing them one by one.
1285 * top.c (user_args): Remove unused declaration.
1289 * infcmd.c (do_registers_info): Move alloca outside of loop.
1293 * remote.c (remote_wait): Added new variable fieldsize.
1294 Add fieldsize (return value of hex2bin) to string pointer p.
1298 * sparc-tdep.c (sparc_gdbarch_init): Get the architecture from
1303 * lin-lwp.c (detach_callback, lin_lwp_wait, lin_lwp_pid_to_str):
1304 Adjust format strings for printing LWPs to account for the fact
1305 that the type returned by GET_LWP() is now a long instead of an
1310 * inferior.h (null_ptid, minus_one_ptid): New variable declarations.
1311 (ptid_build, pid_to_ptid, ptid_get_pid, ptid_get_lwp)
1312 (ptid_get_tid, ptid_equal): New function declarations.
1313 * infrun.c (null_ptid, minus_one_ptid): New variables.
1314 (ptid_build, pid_to_ptid, ptid_get_pid, ptid_get_lwp)
1315 (ptid_get_tid, ptid_equal): New functions.
1316 (_initialize_infrun): Initialize null_ptid, minus_one_ptid,
1317 inferior_ptid, and target_last_wait_ptid.
1319 * defs.h (ptid_t): Redefine to be a struct rather than an int.
1320 (pid_to_ptid, null_ptid, ptid_equal): Delete these macros.
1321 (PIDGET, TIDGET, MERGEPID): Redefine these macros using the
1322 new ptid accessors and constructor.
1324 * config/i386/tm-i386v42mp.h (PIDGET, TIDGET, LIDGET, MERGEPID,
1325 MKLID, MKTID, ISTID): Provide new definitions for these macros.
1326 The old macros are retained, but disabled via #if 0 in order
1327 to aid in future restructuring. See FIXME.
1329 * arm-linux-nat.c (PIDGET, TIDGET): Delete macro definitions.
1330 * i386-linux-nat.c (PIDGET, TIDGET): Likewise.
1331 * infptrace.c (PIDGET, TIDGET): Likewise.
1332 * lin-lwp.c (PIDGET0, PIDGET, TIDGET, MERGEPID): Likewise.
1333 * lin-thread.c (PIDGET0, PIDGET, TIDGET, MERGEPID): Likewise.
1334 * proc-service.c (MERGEPID): Likewise.
1335 * procfs.c (PIDGET, TIDGET, MERGEPID): Likewise.
1336 * thread-db.c (PIDGET0, PIDGET, TIDGET, MERGEPID): Likewise.
1337 * config/nm-linux.h (PIDGET0, PIDGET, TIDGET, MERGEPID): Likewise.
1338 * config/i386/tm-i386sol2.h (PIDGET0, PIDGET, TIDGET, MERGEPID):
1340 * config/sparc/tm-sun4sol2.h (PIDGET0, PIDGET, TIDGET, MERGEPID):
1343 * lin-lwp.c (THREAD_FLAG): Delete macro definition.
1344 (GET_LWP): Redefine in terms of ptid_get_lwp().
1345 (GET_PID): Redefine in terms of ptid_get_pid().
1346 (is_lwp): Redefine without the need for THREAD_FLAG.
1347 (BUILD_LWP): Redefine in terms of ptid_build().
1348 * lin-thread.c (THREAD_FLAG): Delete macro definition.
1349 (GET_LWP): Redefine in terms of ptid_get_lwp().
1350 (GET_PID): Redefine in terms of ptid_get_pid().
1351 (GET_THREAD): Redefine in terms of ptid_get_tid().
1352 (BUILD_THREAD, BUILD_LWP): Redefine in terms of ptid_build().
1353 (is_lwp, is_thread): Redefine.
1354 (linux_child_wait, check_all_signal_numbers)
1355 (linuxthreads_discard_global_state, attach_thread): Declare these
1356 functions to squash warnings about missing declarations.
1357 * sol-thread.c (THREAD_FLAG): Delete macro definition.
1358 (GET_PID): Redefine in terms of ptid_get_pid().
1359 (GET_LWP): Redefine in terms of ptid_get_lwp().
1360 (GET_THREAD): Redefine in terms of ptid_get_tid().
1361 (BUILD_THREAD, BUILD_LWP): Redefine in terms of ptid_build().
1362 (is_lwp, is_thread): Redefine.
1363 * thread-db.c (THREAD_FLAG): Delete macro definition.
1364 (GET_PID): Redefine in terms of ptid_get_pid().
1365 (GET_LWP): Redefine in terms of ptid_get_lwp().
1366 (GET_THREAD): Redefine in terms of ptid_get_tid().
1367 (BUILD_THREAD, BUILD_LWP): Redefine in terms of ptid_build().
1368 (is_lwp, is_thread): Redefine.
1370 * corelow.c (add_to_thread_list, get_core_register_section):
1371 Eliminate hacks needed to prevent regressions when inferior_ptid
1372 wasn't wide enough to hold the core file thread id in the pid
1373 component of inferior_ptid.
1377 * remote.c (hex2bin): Make first argument const.
1378 Require explicit count, don't accept null-terminated str.
1379 (remote_resume, remote_async_resume): White space fix-up.
1380 (remote_write_bytes): Set nr_bytes to return value of bin2hex.
1384 * symtab.c (lookup_symtab_1): Use lbasename (NAME) instead of
1385 basename (NAME). The FreeBSD basename returns a pointer to a
1386 static buffer, even if it's simply returning a string identical to
1388 (lookup_partial_symtab): Likewise.
1392 * solib.c, solib.h: Add comment for function no_shared_libraries.
1396 * solib.h (no_shared_libraries): Make declaration match definition
1401 * remote.c (remote_write_bytes): Set nr_bytes before returning it.
1402 * solib.h (no_shared_libraries): Declare.
1406 * gdbarch.sh (struct gdbarch_info): Delete field bfd_architecture.
1407 (gdbarch_update_p): Rewrite logic filling in INFO struct. Use
1408 user specified values when available.
1409 * rs6000-tdep.c (rs6000_gdbarch_init): Update. Get the
1410 architecture from info.bfd_arch_info.
1411 * gdbarch.c, gdbarch.h: Regenerate.
1415 * remote-e7000.c (e7000_open): Check for bad baud rate.
1416 * remote-st.c (st2000_open): Ditto.
1420 * thread.c (do_captured_list_thread_ids): Use ui_out_tuple_begin
1421 and ui_out_tuple_end instead of ui_out_list_begin and
1424 * Makefile.in (gnu-v2-abi.o): Add $(demangle_h) to list of
1425 dependencies. Reorder dependencies to match #includes in file,
1426 for easier verification.
1430 * breakpoint.c: Replace ui_out_list_begin, ui_out_list_end and
1431 make_cleanup_ui_out_list_end with ui_out_tuple_begin,
1432 ui_out_tuple_end and make_cleanup_ui_out_tuple_begin_end.
1433 * cli/cli-setshow.c: Ditto.
1434 * printcmd.c: Ditto.
1437 * ui-out.h (enum ui_out_type): Fix tipo - tupple -> tuple.
1438 * ui-out.c (ui_out_list_begin): Delete ``lstid'' parameter.
1439 (ui_out_tuple_begin): New function.
1440 (ui_out_tuple_end): New function.
1441 (ui_out_tuple_begin_end): New function.
1442 (make_cleanup_ui_out_list_begin_end): Replace
1443 make_cleanup_ui_out_list_end function.
1444 * ui-out.h (ui_out_list_begin): Update declaration.
1445 (make_cleanup_ui_out_list_begin_end): Replace
1446 make_cleanup_ui_out_list_end declaration.
1447 (ui_out_tuple_begin, ui_out_tuple_end): Declare.
1448 (ui_out_tuple_begin_end): Declare.
1452 * gnu-v2-abi.c: Don't #include "gdb_regex.h". We don't use it.
1457 * config/pa/tm-hppa.h: Remove trigraph.
1458 * hp-symtab-read.c (hpread_type_translate): Provide return value.
1459 (hpread_read_struct_type): Remove trigraph. Add parameter in
1461 (hpread_read_array_type): Provide return value.
1462 (hpread_type_lookup): Avoid ambiguous `else'. Provide return
1464 * hppa-tdep.c (initialize_hp_cxx_exception_support): Remove
1469 * mips-tdep.c (mips_store_return_value,
1470 mips_extract_return_value): Pass arguments to
1471 return_value_location in the proper order.
1475 * Makefile.in (VERSION): Delete. Moved to file ``version.in''.
1476 (version.c): Depends on file ``version.in''. Extract version
1477 number from ``version.in'' file.
1478 (clean mostlyclean): Update.
1479 * version.in: New file.
1484 * breakpoint.c (set_raw_breakpoint): Add new parameter
1485 representing the breakpoint's type. Adjust all callers.
1486 (create_longjmp_breakpoint, create_temp_exception_breakpoint)
1487 (create_thread_event_breakpoint): Don't test for zero return
1488 value from set_raw_breakpoint(). It can never be zero.
1489 (create_exception_catchpoint, watch_command_1): Move logic
1490 which calculates the breakpoint type prior to the call to
1491 set_raw_breakpoint().
1495 * ser-unix.c (rate_to_code): Issue warning if baud rate is invalid.
1496 (hardwire_setbaudrate): Set errno to EINVAL and return with error
1497 if the conversion of the baud rate to code fails.
1501 * ui-out.h (make_cleanup_ui_out_begin_end): Declare.
1502 * ui-out.c (struct ui_out_end_cleanup_data): Define.
1503 (do_cleanup_end): New function. Replace do_list_end.
1504 (make_cleanup_ui_out_end): New function.
1505 (make_cleanup_ui_out_begin_end): New function.
1506 (make_cleanup_ui_out_list_end): Use make_cleanup_ui_out_end.
1510 * MAINTAINERS: Declare xcoffread.c open to all maintainers,
1515 * proc-api.c (ioctl_with_trace): Fix uninitialized variable.
1519 * MAINTAINERS: Add testsuite subdirectory co-maintainers.
1523 * Makefile.in (mi-main.o): Compile with -Werror.
1527 * remote.c (remote_open_1): Call no_shared_libraries, so that
1528 symbols for shared libraries can be reloaded per session.
1529 (remote_async_open_1): Ditto.
1530 * remote.c (bin2hex, hex2bin): New functions. Factor out these
1531 two conversions which are coded for repeatedly in this module.
1532 (remote_threads_extra_info, remote_wait, remote_async_wait,
1533 store_register_using_P, remote_store_registers, remote_write_bytes,
1534 remote_read_bytes, remote_rcmd): Use bin2hex and hex2bin instead
1535 of coding the conversions inline.
1536 (fromhex): Not exported, change from extern to static.
1540 * arch-utils.c (initialize_current_architecture): Delete obsolete
1541 ``info architecture'' command.
1542 (info_architecture): Delete function.
1546 * TODO (5.1, 5.2): Update.
1550 * MAINTAINERS: Jim Ingham is no longer maintaining Arm related
1555 * Makefile.in (SUBDIR_GDBTK_OBS): Add gdbtk-bp.o, gdbtk-register.o
1557 (SUBDIR_GDBTK_SRCS): Ditto for the sources.
1558 (gdbtk-bp.o): New rule.
1559 (gdbtk-register.o): New rule.
1560 (gdbtk-stack.o): New rule.
1561 (gdbtk-cmds.o): Update dependencies.
1563 (gdbtk-hooks.o): Ditto.
1564 (gdbtk-varobj.o): Ditto.
1568 * varobj.c (c_number_of_children): Fix memory leak. Delete unwanted old
1569 variables, not just unregister them.
1573 * varobj.c (c_number_of_children): Check for target type of void*,
1574 not the target type name. Allow dereferencing char*.
1578 * symfile.c (symbol_file_add_main_1): New static function.
1579 Passes the flags arguments to symbol_file_add() and takes care
1580 of any necessary reinitializations.
1581 (symbol_file_command): Call symbol_file_add_main_1() instead of
1583 (symbol_file_add_main): Ditto.
1587 * lin-lwp.c (lin_lwp_pid_to_str): Revert inadvertent format
1588 string change in 2001-05-03 changes.
1589 (lin_lwp_wait): Revert GET_LWP coercion introduced in 2001-05-03
1594 * lin-lwp.c (lin_lwp_attach): Use PIDGET() to fetch the pid
1595 component from inferior_ptid.
1596 (lin_lwp_detach): Use pid_to_ptid() to convert from a pid to a
1601 * sh3-rom.c (_initialize_sh3_rom): Get rid of specific _WINDOWS
1602 conditional for help with connections through parallel ports,
1603 given that the actual code for downloading through a parallel port
1604 is not conditionalized.
1606 * sh-tdep.c: Remove WIN32_WCE conditional. The wince sh target is
1607 unmaintaned, and probably on its way to obsolescence.
1611 * i386-tdep.c (i386_frame_saved_pc): New function.
1612 * config/i386/tm-i386.h (FRAME_SAVED_PC): Redefine in terms of
1613 i386_frame_saved_pc.
1614 (i386_frame_saved_pc): New prototype.
1616 * i386-tdep.c (i386_register_virtual_type): New function.
1617 (i386_register_convertible): New function.
1618 * config/i386/tm-i386.h (REGISTER_VIRTUAL_TYPE): Redefine in terms
1619 of i386_register_virtual_type.
1620 (REGISTER_CONVERTIBLE): Redefine in terms of
1621 i386_register_convertible.
1622 (i386_register_virtual_type, i386_register_convertible): New
1627 * Makefile.in (mn10300-tdep.o): New rule.
1629 * Makefile.in (gdb_string_h): Define. Use it throughout.
1630 Some rules were already using this, even though it isn't defined.
1632 * Makefile.in (obstack_h, target_h): Define; these are already
1633 used elsewhere, but have been expanding to the empty string.
1634 (memattr_h): Define; needed by target_h.
1636 * mn10300-tdep.c (mn10300_extract_return_value): Mark this as
1637 static. (This was accidentally omitted from the earlier patch.)
1639 * mn10300-tdep.c (mn10300_dwarf2_reg_to_regnum): New function.
1640 (mn10300_gdbarch_init): Register it as the architecture's
1641 dwarf2_reg_to_regnum method.
1643 Correct and expand handling of `movm' instruction, and register
1645 * config/mn10300/tm-mn10300.h (D0_REGNUM, A0_REGNUM, MDRQ_REGNUM,
1646 MCRH_REGNUM, MCRL_REGNUM, MCVF_REGNUM): New definitions.
1647 (enum movm_register_bits): New enum.
1648 * mn10300-tdep.c (set_movm_offsets): Use symbolic names for the
1649 bits, not hex literals. Handle the `other', `exreg0', and
1650 `exother' bits. Correct handling of `exreg1': it saves r4, r5,
1651 r6, and r7, not r2, r3, r4, and r5.
1652 (saved_regs_size): New function.
1653 (mn10300_frame_chain, mn10300_frame_saved_pc): Use it, instead
1654 of computing the same thing inline, incorrectly.
1656 * mn10300-tdep.c (mn10300_gdbarch_init): We do have a
1657 dummy_breakpoint_offset; it's zero.
1659 * mn10300-tdep.c (mn10300_pop_frame): Split the mn10300-specific
1660 stuff out into mn10300_pop_frame_regular, and use
1661 generic_pop_current_frame. This lets us share code, and also
1662 makes this function's prototype match that expected by gdbarch.
1663 Make this function static.
1664 (mn10300_pop_frame_regular): New function.
1665 (mn10300_gdbarch_init): Register mn10300_pop_frame as the
1666 gdbarch's pop_frame method.
1667 * config/mn10300/tm-mn10300.h (POP_FRAME): Delete definition.
1668 (mn10300_pop_frame): Delete declaration.
1670 * mn10300-tdep.c (mn10300_saved_pc_after_call,
1671 mn10300_extract_return_value,
1672 mn10300_extract_struct_value_address, mn10300_store_return_value,
1673 mn10300_use_struct_convention, mn10300_breakpoint_from_pc,
1674 mn10300_frame_chain, mn10300_skip_prologue,
1675 mn10300_push_arguments, mn10300_push_return_address,
1676 mn10300_store_struct_return, mn10300_frame_saved_pc,
1677 mn10300_init_extra_frame_info, mn10300_frame_init_saved_regs):
1678 Make these functions static; they should only be visible to the
1679 outside world as gdbarch methods.
1681 * config/mn10300/tm-mn10300.h (mn10300_find_callers_reg): Delete
1684 * mn10300-tdep.c (mn10300_gdbarch_init): Put the gdbarch methods
1685 in some rational order.
1687 * mn10300-tdep.c (mn10300_gdbarch_init): Rather than using
1688 generic_pc_in_call_dummy, use pc_in_call_dummy_at_entry_point.
1690 Use gdbarch for most target parameters for the MN10300, rather
1691 than the tm-*.h file.
1692 * config/mn10300/tm-mn10300.h (MAX_REGISTER_VIRTUAL_SIZE,
1693 REGISTER_BYTES, FP_REGNUM, BREAKPOINT_FROM_PC,
1694 FUNCTION_START_OFFSET, DECR_PC_AFTER_BREAK, INNER_THAN,
1695 SAVED_PC_AFTER_CALL, INIT_EXTRA_FRAME_INFO, FRAME_INIT_SAVED_REGS,
1696 FRAME_CHAIN, FRAME_CHAIN_VALID, FRAME_SAVED_PC,
1697 EXTRACT_RETURN_VALUE, EXTRACT_STRUCT_VALUE_ADDRESS,
1698 STORE_RETURN_VALUE, STORE_STRUCT_RETURN, SKIP_PROLOGUE,
1699 FRAME_ARGS_SKIP, FRAME_ARGS_ADDRESS, FRAME_LOCALS_ADDRESS,
1700 FRAME_NUM_ARGS, POP_FRAME, USE_GENERIC_DUMMY_FRAMES, CALL_DUMMY,
1701 CALL_DUMMY_START_OFFSET, CALL_DUMMY_BREAKPOINT_OFFSET,
1702 CALL_DUMMY_LOCATION, FIX_CALL_DUMMY, CALL_DUMMY_ADDRESS,
1703 TARGET_READ_FP, PUSH_RETURN_ADDRESS, PUSH_DUMMY_FRAME,
1704 SAVE_DUMMY_FRAME_TOS, PUSH_ARGUMENTS, PC_IN_CALL_DUMMY,
1705 REG_STRUCT_HAS_ADDR, USE_STRUCT_CONVENTION, GET_SAVED_REGISTER):
1706 Delete definitions. We register gdbarch methods for these now.
1707 (struct frame_info, struct type, struct value): Delete forward
1708 declarations of these types; they're no longer necessary, since we
1709 don't have function declarations here any more.
1710 * mn10300-tdep.c: #include "arch-utils.h", to get declarations for
1711 some default gdbarch methods.
1712 (mn10300_store_struct_return): Return void, as expected by
1714 (mn10300_init_extra_frame_info): Take initial `fromleaf' argument,
1715 as expected by gdbarch.
1716 (mn10300_frame_init_saved_regs): Provide dummy definition for
1717 this, as required by gdbarch.
1718 (mn10300_gdbarch_init): Add mn10300_call_dummy_words, as expected
1719 by gdbarch. Register gdbarch methods or values for all the stuff
1720 removed from tm-10300.h, listed above.
1724 * cli-out.c (cli_begin, cli_end): Replace cli_list_begin and
1726 (cli_ui_out_impl): Update.
1728 * ui-out.c (default_begin, default_end): Replace
1729 default_list_begin and default_list_end.
1730 (default_ui_out_impl): Update.
1731 (uo_begin, uo_end): Replace ou_list_begin and uo_list_end.
1732 (ui_out_begin, ui_out_end): Replace ui_out_list_begin and
1734 (ui_out_list_begin, ui_out_list_end): New. Compatibility
1736 (struct ui_out_level): Add field type.
1737 (push_level, pop_level): Update. Add type parameter.
1739 * ui-out.h (enum ui_out_type): Declare.
1740 (ui_out_begin, ui_out_end): Declare.
1741 (ui_out_begin_ftype, ui_out_end_ftype): Replace list_begin_ftype
1743 (struct ui_out_impl): Update.
1747 * ui-out.h (list_begin_ftype, list_end_ftype): Rename argument
1748 ``list_flag'' to ``depth''.
1749 * ui-out.c (default_list_begin, default_list_end): Update.
1750 (uo_list_begin, uo_list_end): Update.
1751 (MAX_UI_OUT_LEVELS): Define.
1752 (struct ui_out_level): Define.
1753 (top-level): Include "gdb_assert.h".
1754 (struct ui_out): Add fields ``level'' and ``levels''. Delete
1755 fields ``list_flag'' and ``field_count''.
1756 (ui_out_new): Update.
1757 (verify_field_proper_position): Update.
1758 (current_level, push_level, pop_level): New functions.
1759 (ui_out_list_begin): Use push_level.
1760 (ui_out_list_end): Use pop_level.
1761 (ui_out_field_int): Use current_level.
1762 (ui_out_field_skip): Ditto.
1763 (ui_out_field_fmt): Ditto.
1767 * language.c (longest_local_hex_string_custom): Strlen test is
1768 inverted -- reverse the sense of the test.
1772 * config/i386/tm-i386v.h (struct frame_info, struct
1773 frame_saved_regs): Remove declarations.
1774 (i386_frame_num_args): Remove prototype.
1778 * MAINTAINERS: I'm no longer actively maintaining the mn10300
1783 * main.c (captured_main): Delete #ifndef _WIN32 conditional for
1788 * inferior.h (save_inferior_ptid): Declare.
1789 * infrun.c (save_inferior_ptid, restore_inferior_ptid): Define.
1791 * hpux-thread.c (save_inferior_ptid, restore_inferior_ptid):
1792 Delete these functions.
1793 * lin-lwp.c (save_inferior_ptid, restore_inferior_ptid): Likewise.
1794 * lin-thread.c (save_inferior_ptid, restore_inferior_ptid): Likewise.
1795 * linux-thread.c (save_inferior_ptid, restore_inferior_ptid):
1797 * proc-service.c (save_inferior_ptid, restore_inferior_ptid):
1799 * sol-thread.c (save_inferior_ptid, restore_inferior_ptid): Likewise.
1800 * thread-db.c (save_inferior_ptid, restore_inferior_ptid): Likewise.
1802 * somsolib.c (reset_inferior_ptid): Delete.
1803 (som_solib_remove_inferior_hook): Use save_inferior_ptid() to
1804 build the cleanup struct.
1806 * breakpoint.c (reattach_breakpoints, detach_breakpoints): Use
1807 a cleanup to save/restore inferior_ptid.
1811 Implement attach/detach for multi-threaded programs on Linux.
1812 * thread-db.c (keep_thread_db): Adjust comment.
1813 (deactivate_target): Removed.
1814 (thread_db_new_objfile): Don't call deactivate_target. Implement
1815 guts of deactivate_target inline instead.
1816 (attach_thread): Call ATTACH_LWP unconditionally if defined.
1817 (thread_db_attach): New function.
1818 (thread_db_detach): Don't call deactivate_target. Do necessary
1819 cleanup inline instead. Set inferior_ptid to LWP corresponding to
1820 the current user-level thread.
1821 (thread_db_kill): Set inferior_ptid to LWP corresponding to the
1822 current user-level thread.
1823 (thread_db_create_inferior): Deactivate target vector if
1824 KEEP_THREAD_DB is zero.
1825 (thread_db_mourn_inferior): Don't call deactivate_target. Do
1826 necessary cleanup inline instead.
1827 (init_thread_db_ops): Initialize to_attach field to
1829 * lin-lwp.c (lin_lwp_mourn_inferior): Remove prototype.
1830 (stop_wait_callback): Add prototype.
1831 (init_lwp_list): Add comment about when to re-initialize the LWP
1833 (lin_lwp_attach_lwp): Only call ptrace for cloned processes.
1834 Avoid adding publicates to the LWP list. Only mark an LWP as
1835 signalled if it doesn't correspond to a cloned process.
1836 (lin_lwp_attach): Add initial process to the LWP list. Make sure
1837 it's stopped and fake a SIGSTOP.
1838 (detach_callback): New function.
1839 (lin_lwp_detach): Implement.
1840 (lin_lwp_create_inferior): Don't re-initialize LWP list here.
1841 Call child_ops.to_create_inferior directly instead of via
1842 target_beneath local.
1843 (lin_lwp_mourn_inferior): Call child_ops.to_mourn_inferior
1844 directly instead of via target_beneath local.
1848 * symtab.c (lookup_symtab_1, lookup_partial_symtab): Use basename
1849 instead of non-portable search for `/'. Use FILENAME_CMP instead
1850 of STREQ, to account for case-insensitive filesystems.
1851 (top-level): #include "filenames.h".
1855 * breakpoint.c (check_duplicates): Use the breakpoint's type, not
1856 its address, to decide whether it's a watchpoint or not. Zero
1857 is a valid code address.
1858 (update_breakpoints_after_exec): Admonishing comments.
1859 * breakpoint.h (struct breakpoint): Doc fixes.
1861 * breakpoint.c (check_duplicates): Take a breakpoint object as an
1862 argument, rather than an address and section. All callers changed.
1866 * defs.h (ptid_t): New typedef.
1867 (pid_to_ptid, null_ptid, minus_one_ptid, ptid_equal): New macros.
1869 * a68v-nat.c, alphabsd-nat.c, arch-utils.c, arm-linux-nat.c,
1870 blockframe.c, breakpoint.c, breakpoint.h,
1871 config/i386/nm-i386sol2.h, config/i386/tm-i386sco5.h,
1872 config/ia64/nm-linux.h, config/m68k/nm-hp300bsd.h,
1873 config/mips/nm-irix4.h, config/mips/nm-irix5.h,
1874 config/pa/nm-hppah.h, config/pa/tm-hppa.h,
1875 config/rs6000/nm-rs6000.h, config/sparc/nm-sun4sol2.h,
1876 corelow.c, cxux-nat.c, d10v-tdep.c, dink32-rom.c,
1877 dve3900-rom.c, fork-child.c, frame.c, gnu-nat.c, go32-nat.c,
1878 hp300ux-nat.c, hppa-tdep.c, hppab-nat.c, hppah-nat.c,
1879 hpux-thread.c, i386-linux-nat.c, i386aix-nat.c, i386b-nat.c,
1880 i386bsd-nat.c, i386gnu-nat.c, i386mach-nat.c, i386nbsd-nat.c,
1881 infcmd.c, inferior.h, inflow.c, infptrace.c, infrun.c,
1882 inftarg.c, infttrace.c, lin-lwp.c, lin-thread.c,
1883 linux-thread.c, lynx-nat.c, m3-nat.c, m32r-rom.c,
1884 m68knbsd-nat.c, m88k-nat.c, mac-nat.c, mips-nat.c,
1885 mon960-rom.c, monitor.c, ns32knbsd-nat.c, ocd.c, ppc-bdm.c,
1886 ppcnbsd-nat.c, proc-service.c, procfs.c, ptx4-nat.c,
1887 regcache.c, remote-adapt.c, remote-array.c, remote-bug.c,
1888 remote-e7000.c, remote-es.c, remote-mips.c, remote-mm.c,
1889 remote-nindy.c, remote-os9k.c, remote-rdi.c, remote-rdp.c,
1890 remote-sds.c, remote-sim.c, remote-st.c, remote-udi.c,
1891 remote-vx.c, remote.c, rs6000-nat.c, sol-thread.c,
1892 solib-aix5.c, solib-svr4.c, somsolib.c, sparc-nat.c,
1893 standalone.c, sun3-nat.c, sun386-nat.c, symm-nat.c, target.c,
1894 target.h, thread-db.c, thread.c, top.c, ultra3-nat.c,
1895 uw-thread.c, v850ice.c, win32-nat.c, wince.c, xcoffsolib.c
1896 (inferior_pid): Rename to inferior_ptid everywhere - even in
1897 comments and obsolete ports. In cases where this variable
1898 really is supposed to be used as a process id, use PIDGET() to
1899 extract the process id component from inferior_ptid. The
1900 other cases, either involving other variables whose types had
1901 to be changed or functions whose signatures had to changed
1902 are listed separately below.
1904 * arm-linux-nat.c (get_thread_id): Change type of argument
1905 representing a combined process/thread id from ``int'' to
1906 ``ptid_t''. Also change parameter name to ptid.
1907 * breakpoint.h, breakpoint.c (breakpoint_thread_match): Likewise.
1908 * corelow.c (core_file_thread_alive): Likewise.
1909 * d10v-tdep.c (d10v_read_pc, d10v_write_pc): Likewise.
1910 * defs.h (*target_wait_hook): Likewise.
1911 * gdbthread.h (thread_info, delete_thread, pid_to_thread_id)
1912 (find_thread_pid, save_infrun_state, load_infrun_state): Likewise.
1913 * gnu-nat.c (gnu_thread_alive, gnu_pid_to_str, gnu_wait)
1914 (gnu_resume): Likewise.
1915 * go32-nat.c (go32_wait, go32_resume): Likewise.
1916 * h8500-tdep.c (h8500_read_pc, h8500_write_pc): Likewise.
1917 * hppa-tdep.c (target_read_pc, target_write_pc): Likewise.
1918 * hppah-nat.c (child_pid_to_str, hppa_tid_to_str,
1919 (hppa_pid_or_tid_to_str, child_post_startup_inferior)
1920 (child_thread_alive): Likewise.
1921 * hpux-thread.c (hpux_thread_notice_signals, hpux_thread_alive)
1922 (hpux_pid_to_str, hpux_thread_wait, hpux_thread_resume): Likewise.
1923 * i386-linux-nat.c (child_resume): Likewise.
1924 * ia64-linux-nat.c (enable_watchpoints_in_psr, fetch_debug_register)
1925 (store_debug_register, fetch_debug_register_pair)
1926 (store_debug_register_pair, ia64_linux_insert_watchpoint)
1927 (ia64_linux_remove_watchpoint, ia64_linux_stopped_by_watchpoint):
1929 * ia64-tdep.c (ia64_read_pc, ia64_write_pc): Likewise.
1930 * inferior.h (read_pc_pid, generic_target_read_pc, write_pc_pid)
1931 (generic_target_write_pc, ptrace_wait, child_resume)
1932 (get_last_target_status): Likewise.
1933 * infptrace.c (ptrace_wait, child_resume): Likewise.
1934 * inftarg.c (child_wait, child_post_wait, child_thread_live)
1935 (child_pid_to_str): Likewise.
1936 * infttrace.c (ptrace_wait, child_thread_alive, child_resume)
1937 (hppa_pid_or_tid_to_str, child_post_startup_inferior): Likewise.
1938 * lin-lwp.c (add_lwp, delete_lwp, find_lwp_pid, lin_lwp_attach_lwp)
1939 (lin_lwp_resume, lin_lwp_wait, lin_lwp_thread_alive)
1940 (lin_lwp_pid_to_str): Likewise.
1941 * lin-thread.c (thread_db_alive, thread_db_pid_to_str)
1942 (thread_db_resume, thread_db_wait): Likewise.
1943 * linux-thread.c (linuxthreads_thread_alive, linuxthreads_pid_to_str)
1944 (linuxthreads_resume, linuxthreads_wait): Likewise.
1945 * lynx-nat.c (child_wait, child_thread_alive, child_resume)
1946 (child_pid_to_str): Likewise.
1947 * m3-nat.c (mach_really_wait, m3_resume): Likewise.
1948 * mac-nat.c (child_wait, child_resume): Likewise.
1949 * mips-tdep.c (mips_read_pc): Likewise.
1950 * monitor.c (monitor_wait, monitor_resume): Likewise.
1951 * ocd.c, ocd.h (ocd_thread_alive, ocd_resume): Likewise.
1952 * ppc-bdm.c (bdm_ppc_wait): Likewise.
1953 * procfs.c (do_attach, procfs_wait, procfs_resume)
1954 (procfs_notice_signals, procfs_thread_alive, procfs_pid_to_str)
1955 (procfs_set_watchpoint, procfs_stopped_by_watchpoint)
1956 (procfs_find_LDT_entry): Likewise.
1957 * regcache.c (read_register_pid, read_signed_register_pid)
1958 (write_register_pid, generic_target_read_pc, read_pc_pid)
1959 (generic_target_write_pc, write_pc_pid): Likewise.
1960 * regcache.h (read_register_pid, read_signed_register_pid)
1961 (write_register_pid): Likewise.
1962 * remote-adapt.c (adapt_wait, adapt_resume): Likewise.
1963 * remote-array.c (array_wait, array_resume): Likewise.
1964 * remote-bug.c (bug_wait, bug_resume): Likewise.
1965 * remote-e7000.c (e7000_wait, e7000_resume): Likewise.
1966 * remote-eb.c (eb_wait, eb_resume): Likewise.
1967 * remote-es.c (es1800_wait, es1800_resume): Likewise.
1968 * remote-mips.c (mips_wait, mips_resume): Likewise.
1969 * remote-mm.c (mm_wait, mm_resume): Likewise.
1970 * remote-nindy.c (nindy_wait, nindy_resume): Likewise.
1971 * remote-os9k.c (rombug_wait, rombug_resume): Likewise.
1972 * remote-rdi.c (arm_rdi_wait, arm_rdi_resume): Likewise.
1973 * remote-rdp.c (remote_rdp_resume, remote_rdp_wait): Likewise.
1974 * remote-sds.c (sds_wait, sds_resume): Likewise.
1975 * remote-sim.c (gdbsim_wait, gdbsim_resume): Likewise.
1976 * remote-st.c (st2000_wait, st2000_resume): Likewise.
1977 * remote-udi.c (udi_wait, udi_resume): Likewise.
1978 * remote-vx.c (vx_wait, vx_resume): Likewise.
1979 * remote.c (remote_current_thread, remote_resume, remote_wait)
1980 (remote_async_resume, remote_async_wait, remote_cisco_wait)
1981 (remote_thread_alive): Likewise.
1982 * sol-thread.c (thread_to_lwp, lwp_to_thread, sol_thread_resume)
1983 (sol_thread_wait, sol_thread_notice_signals, sol_thread_alive)
1984 (solaris_pid_to_str): Likewise.
1985 * symm-nat.c (child_wait, child_resume): Likewise.
1986 * target.c (debug_to_resume, debug_to_wait, debug_to_post_wait)
1987 (debug_to_notice_signals, debug_to_thread_alive)
1988 (normal_target_post_startup_inferior, normal_pid_to_str)
1989 (debug_to_post_startup_inferior): Likewise.
1990 * target.h (to_resume, to_wait, to_post_wait)
1991 (to_post_startup_inferior, to_notice_signals, to_thread_alive)
1992 (to_pid_to_str [all in struct target_ops]): Likewise.
1993 (child_post_wait, child_thread_alive, normal_pid_to_str): Likewise.
1994 * thread-db.c (thread_from_lwp, lwp_from_thread, thread_db_wait)
1995 (attach_thread, detach_thread, thread_db_resume, check_event)
1996 (thread_db_post_startup_inferior, thread_db_thread_alive)
1997 (thread_db_pid_to_str): Likewise.
1998 * thread.c (add_thread, delete_thread, find_thread_pid)
1999 (pid_to_thread_id, in_thread_list, load_infrun_state)
2000 (save_infrun_state, switch_to_thread, restore_current_thread)
2001 (make_cleanup_restore_current_thread): Likewise.
2002 * top.c (target_wait_hook): Likewise.
2003 * uw-thread.c (dbgpid, thr_to_lwp, lwp_to_thr, add_thread_uw)
2004 (uw_thread_resume, libtrhead_stub, uw_thread_wait, uw_thread_alive)
2005 (uw_thread_pid_to_str): Likewise.
2006 * v850ice.c (v850ice_wait, v850ice_resume): Likewise.
2007 * win32-nat.c (child_wait, child_resume, win32_child_thread_alive)
2008 (cywin_pid_to_str): Likewise.
2009 * wince.c (child_wait, child_resume, win32_child_thread_alive):
2011 * config/nm-linux.h (linuxthreads_pid_to_str): Likewise.
2012 * config/nm-lynx.h (child_wait, lynx_pid_to_str): Likewise.
2013 * config/alpha/nm-linux.h (lin_lwp_attach_lwp): Likewise.
2014 * config/arm/nm-linux.h (lin_lwp_attach_lwp): Likewise.
2015 * config/h8500/tm-h8500.h (h8500_read_pc, h8500_write_pc): Likewise.
2016 * config/i386/nm-i386sol2.h (procfs_stopped_by_watchpoint)
2017 (procfs_set_watchpoint): Likewise.
2018 * config/i386/nm-linux.h (lin_lwp_attach_lwp): Likewise.
2019 * config/i386/nm-ptx4.h (child_wait): Likewise.
2020 * config/i386/nm-symmetry.h (child_wait): Likewise.
2021 * config/i386/tm-cygwin.h (cygwin_pid_to_str): Likewise.
2022 * config/ia64/nm-linux.h (ia64_linux_stopped_by_watchpoint)
2023 (ia64_linux_insert_watchpoint, ia64_linux_remove_watchpoint)
2024 (lin_lwp_attach_lwp): Likewise.
2025 * config/mips/nm-irix4.h, config/mips/nm-irix5.h
2026 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Likewise.
2027 * config/pa/nm-hppah.h (child_pid_to_str, hppa_tid_to_str)
2028 (hppa_pid_or_tid_to_str): Likewise.
2029 * config/pa/tm-hppa.h (target_read_pc, target_write_pc): Likewise.
2030 * config/powerpc/nm-linux.h (lin_lwp_attach_lwp): Likewise.
2031 * config/sparc/nm-sun4sol2.h (procfs_stopped_by_watchpoint)
2032 (procfs_set_watchpoint): Likewise.
2034 * gdbthread.h (thread_id_to_pid): Change return type which
2035 represents a combined process/thread id from ``int'' to
2037 * gnu-nat.c (gnu_wait): Likewise.
2038 * go32-nat.c (go32_wait): Likewise.
2039 * hpux-thread.c (hpux_thread_wait): Likewise.
2040 * inferior.h (procfs_first_available): Likewise.
2041 * inftarg.c (child_wait): Likewise.
2042 * infttrace.c (ptrace_wait): Likewise.
2043 * lin-lwp.c (lin_lwp_wait): Likewise.
2044 * lin-thread.c (thread_db_wait): Likewise.
2045 * linux-thread.c (linuxthreads_wait): Likewise.
2046 * lynx-nat.c (child_wait): Likewise.
2047 * m3-nat.c (mach_really_wait): Likewise.
2048 * mac-nat.c (child_wait): Likewise.
2049 * monitor.c (monitor_wait): Likewise.
2050 * ppc-bdm.c (bdm_ppc_wait): Likewise.
2051 * procfs.c (do_attach, procfs_wait, procfs_first_available): Likewise.
2052 * remote-adapt.c (adapt_wait): Likewise.
2053 * remote-array.c (array_wait): Likewise.
2054 * remote-bug.c (bug_wait): Likewise.
2055 * remote-e7000.c (e7000_wait): Likewise.
2056 * remote-eb.c (eb_wait): Likewise.
2057 * remote-es.c (es1800_wait): Likewise.
2058 * remote-mips.c (mips_wait): Likewise.
2059 * remote-mm.c (mm_wait): Likewise.
2060 * remote-nindy.c (nindy_wait): Likewise.
2061 * remote-os9k (rombug_wait): Likewise.
2062 * remote-rdi.c (arm_rdi_wait): Likewise.
2063 * remote-rdp.c (remote_rdp_wait): Likewise.
2064 * remote-sds.c (sds_wait): Likewise.
2065 * remote-sim.c (gdbsim_wait): Likewise.
2066 * remote-st.c (st2000_wait): Likewise.
2067 * remote-udi.c (udi_wait): Likewise.
2068 * remote-vx.c (vx_wait): Likewise.
2069 * remote.c (remote_wait, remote_async_wait, remote_current_thread)
2070 (remote_cisco_wait): Likewise.
2071 * sol-thread.c (thread_to_lwp, lwp_to_thread, sol_thread_wait):
2073 * symm-nat.c (child_wait): Likewise.
2074 * target.c (debug_to_wait): Likewise.
2075 * target.h (to_wait [in struct target_ops]): Likewise.
2076 * thread.c (thread_id_to_pid): Likewise.
2077 * thread-db.c (thread_from_lwp, lwp_from_thread, thread_db_wait):
2079 * top.c (*target_wait_hook): Likewise.
2080 * uw-thread.c (lwp_to_thr, uw_thread_wait): Likewise.
2081 * v850ice.c (v850ice_wait): Likewise.
2082 * win32-nat.c (child_wait): Likewise.
2083 * wince.c (child_wait): Likewise.
2084 * config/nm-lynx.h (child_wait): Likewise.
2085 * config/i386/nm-ptx4.h (child_wait): Likewise.
2086 * config/i386/nm-symmetry.h (child_wait): Likewise.
2088 * arch-utils.c (generic_prepare_to_proceed): Rename wait_pid
2089 to wait_ptid and change its type from ``int'' to ``ptid_t''.
2090 * breakpoint.c (reattach_breakpoints, detach_breakpoints): Likewise,
2091 but rename saved_inferior_pid to saved_inferior_ptid.
2092 * d10v-tdep.c (d10v_read_pc, d10_write_pc): Likewise, but rename
2093 save_pid to save_ptid.
2094 * gdbthread.h (struct thread_info): Likewise, but rename pid to ptid.
2095 * hppah-nat.c (child_pid_to_exec): Likewise, but rename
2096 saved_inferior_pid to saved_inferior_ptid.
2097 * hpux-thread.c (main_ptid): Likewise, but rename from main_pid.
2098 * infrun.c (previous_inferior_pid [static global]): Likewise,
2099 but rename to previous_inferior_ptid.
2100 (resume): Likewise, but rename resume_pid to resume_ptid.
2101 (struct execution_control_state): Likewise, but rename
2102 pid to ptid, saved_inferior_pid to saved_inferior_ptid,
2103 and waiton_pid to waiton_ptid.
2104 (target_last_wait_pid): Likewise, but rename to
2105 target_last_wait_ptid.
2106 * infttrace.c (saved_real_pid): Likewise, but rename to
2108 (child_pid_to_exec_file): Likewise, but rename saved_inferior_pid
2109 to saved_inferior_ptid.
2110 * lin-lwp.c (struct lwp_info): Likewise, but rename pid to ptid.
2111 (trap_ptid): Likewise, but renamed from trap_pid.
2112 * lin-thread.c (handle_new_thread): Likewise, but rename gdb_pid
2114 * linux-thread.c (detach_thread): Likewise, but rename pid to ptid.
2115 (thread_db_wait): Likewise, but rename ret_pid to retptid.
2116 * procfs.c (procfs_wait): Likewise, for retval whose name
2117 doesn't change. Also, ``temp'' becomes two separate variables,
2118 one named temp_tid (an int) and the other temp_ptid.
2119 (procfs_notice_thread): Likewise (type change) for gdb_threadid
2120 whose name does not change.
2121 * regcache.c (registers_ptid): Likewise, but renamed from
2123 (read_register_pid, read_signed_register_pid, write_register_pid):
2124 Likewise, but rename save_pid to save_ptid.
2125 (read_pc_pid, write_pc_pid): Likewise, but rename saved_inferior_pid
2126 to saved_inferior_ptid.
2127 * remote.c (remote_newthread_step): Likewise, but rename pid to ptid.
2128 * sol-thread.c (struct ps_prochandle): Likewise.
2129 (sol_thread_resume): Likewise, for save_pid which becomes save_ptid.
2130 (sol_thread_wait): Likewise, for rtnval whose name does not
2131 change, and for save_pid which becomes save_ptid.
2132 (solaris_pid_to_str): Likewise for lwp whose name does not change.
2133 (sol_find_new_threads_callback): Likewise, for pid which becomes
2135 * target.h (target_resume, target_wait, target_post_wait)
2136 (target_post_startup_inferior, target_notice_signals)
2137 (target_thread_alive): Likewise.
2138 * thread.c (info_threads_command): Likewise, but rename
2139 current_pid to current_ptid.
2140 (struct current_thread_cleanup): Likewise, but rename field
2141 inferior_pid to inferior_ptid.
2142 * thread-db.c (find_new_threads_callback): Likewise, but rename
2144 * uw-thread.c (thr_to_lwp): Likewise for lid whose name does not
2146 (lwp_to_tr): Likewise fo tid whose name remains unchanged.
2147 (thr_infpid, lwp_infpid, notice_thread, libthread_stub): Likewise,
2148 but rename pid to ptid.
2149 * config/alpha/nm-linux.h (ATTACH_LWP): Likewise.
2150 * config/arm/nm-linux.h (ATTACH_LWP): Likewise.
2151 * config/i386/nm-linux.h (ATTACH_LWP): Likewise.
2152 * config/ia64/nm-linux.h (ATTACH_LWP): Likewise.
2153 * config/pa/nm-hppah.h (target_tid_to_str): Likewise.
2154 * config/powerpc/nm-linux.h (ATTACH_LWP): Likewise.
2156 * arch-utils.c (generic_prepare_to_proceed): Test for the
2157 "zero" ptid by using ptid_equal() to test to see if variable
2158 in question is the same as null_ptid. This replaces a direct
2160 * cxux-nat.c (add_shared_symbol_files): Likewise.
2161 * i386aix-nat.c, i386b-nat.c (i386_float_info): Likewise.
2162 * infcmd.c (run_command): Likewise.
2163 * inflow.c (kill_command): Likewise.
2164 * infttrace.c (call_ttrace): Likewise.
2165 * lin-lwp.c (lin_lwp_prepare_to_proceed): Likewise.
2166 * lin-thread.c (thread_db_kill): Likewise.
2167 * procfs.c (procfs_kill_inferior, procfs_mourn_inferior): Likewise.
2168 * remote-es.c (es1800_kill): Likewise.
2169 * sol-thread.c (sol_thread_create_inferior): Likewise.
2170 * solib.c (locate_base): Likewise.
2171 * target.c (nosupport_runtime): Likewise.
2172 * thread-db.c (thread_db_wait): Likewise.
2173 * top.c (quit_confirm, quit_force): Likewise.
2174 * uw-thread (lwp_infpid, uw_thread_resume): Likewise.
2176 * infrun.c (handle_inferior_event, stop_stepping, normal_stop):
2177 Use ptid_equal to compare value of process/thread ids instead of
2178 ``=='' and ``!='' operators.
2179 lin-lwp.c (delete_lwp, lin_lwp_prepare_to_proceed)
2180 (stop_wait_callback, lin_lwp_wait): Likewise.
2181 * procfs.c (procfs_wait): Likewise.
2182 * regcache.c (read_register_bytes, read_register_gen)
2183 (write_register_gen, read_register, read_register_pid)
2184 (read_signed_register, read_signed_register_pid, write_register)
2185 (write_register_pid, supply_register): Likewise.
2186 * remote-vx.c (vx_resume): Likewise.
2187 * sol-thread.c (sol_thread_wait): Likewise.
2188 * symm-nat.c (kill_inferior): Likewise.
2189 * thread.c (delete_thread, find_thread_pid, pid_to_thread_id)
2190 (in_thread_list, info_threads_command, switch_to_thread)
2191 (restore_current_thread): Likewise.
2192 * uw-thread (libtread_stub): Likewise.
2194 * arm-linux-nat.c (GET_THREAD_ID): Change PID to PTID.
2196 * corelow.c (add_to_thread_list): Convert argument in add_thread()
2198 * gnu-nat.c (inf_validate_procs): Likewise.
2199 * linux-thread.c (stop_thread, update_stop_threads): Likewise.
2200 * remote.c (record_currthread, remote_threads_info): Likewise.
2201 * win32-nat.c (child_add_thread): Likewise.
2203 * hpux-thread.c (save_inferior_pid, restore_inferior_pid): Rename,
2204 respectively, to save_inferior_ptid() and restore_inferior_ptid().
2205 Adjust implementations to operate on ``ptid_t'' instead of ``int''.
2206 * lin-lwp.c (save_inferior_pid, restore_inferior_pid): Likewise.
2207 * lin-thread.c (save_inferior_pid, restore_inferior_pid): Likewise.
2208 * linux-thread.c (save_inferior_pid, restore_inferior_pid): Likewise.
2209 * proc-service.c (save_inferior_pid, restore_inferior_pid): Likewise.
2210 * sol-thread.c (save_inferior_pid, restore_inferior_pid): Likewise.
2211 * thread-db.c (save_inferior_pid, restore_inferior_pid): Likewise.
2213 * infrun.c (RESUME_ALL): New macro representing the -1 ptid
2214 to be passed to target_resume() when all threads should resume.
2215 (resume): Set resume_ptid to RESUME_ALL rather than -1.
2216 (handle_inferior_event): Invoke target_resume() with RESUME_ALL
2218 * irix5-nat.c (solib_create_inferior_hook): Convert -1 to
2219 a ptid_t in target_resume() call.
2220 * osfsolib.c (solib_create_inferior_hook): Likewise.
2221 * solib-svr4.c (solib_create_inferior_hook): Likewise.
2223 * lin-lwp.c (PIDGET, PIDGET0): Rename original PIDGET macro to
2224 PIDGET0. Define new PIDGET macro which uses PIDGET0, the only
2225 difference being that the 0xffff pattern will be interpreted
2227 * lin-thread.c (PIDGET, PIDGET0): Likewise.
2228 * thread-db.c (PIDGET, PIDGET0): Likewise.
2229 * config/nm-linux.h (PIDGET, PIDGET0): Likewise.
2230 * config/i386/tm-i386sol2.h (PIDGET, PIDGET0): Likewise.
2231 * config/i386/tm-i386v42mp.h (PIDGET, PIDGET0): Likewise.
2232 * config/sparc/tm-sun4sol2.h (PIDGET, PIDGET0): Likewise.
2234 * m3-nat.c (init_m3_ops): Fix typo; initialize to_wait field to
2235 mach_really_wait rather than mach_really__wait.
2236 * lin-thread.c (check_for_thread_event): Fix warning; make function
2237 actually return a value.
2239 * gdbarch.sh (TARGET_READ_PC, TARGET_WRITE_PC): Change type of
2240 ``pid'' arguments from ``int'' to ``ptid_t''. Also renamed
2242 * gdbarch.h, gdbarch.c: Regenerated.
2246 * rdi-share/devsw.c: Include <time.h> for struct tm
2250 * config/djgpp/fnchange.lst: Add mappings for the new
2251 opcodes/openrisc-* files.
2255 * lin-lwp.c: Change printf to fprintf_unfiltered.
2256 * Makefile.in: Add rules for thread-db.o, lin-lwp.o, proc-service.o.
2260 * config/rs6000/tm-rs6000.h (IN_SOLIB_RETURN_TRAMPOLINE): Define.
2261 (rs6000_in_solib_return_trampoline): Declare.
2262 * rs6000-tdep.c (rs6000_in_solib_return_trampoline): New
2264 (rs6000_skip_trampoline_code): Skip bigtoc fixup code.
2265 * xcoffread.c (read_xcoff_symtab): Perform the ISFCN function
2266 check after the CSECT check rather than before it. Allocate
2267 separate symtabs for CSECTs whose names begin with '@'.
2268 (scan_xcoff_symtab): Don't ignore symbols beginning with '@'.
2269 Activate the misc_func_recorded mechanism for whose names begin
2274 * ppcnbsd-nat.c (fetch_inferior_registers)
2275 (store_inferior_registers, fetch_core_registers): Changed to use
2276 fpreg[] instead of r_regs[] to access floating point registers.
2280 * sh-tdep.c: Get rid of the function prototypes.
2281 (sh_sh4_build_float_register_type): Move earlier in file.
2282 (fv_reg_base_num): Ditto.
2283 (dr_reg_base_num): Ditto.
2287 * thread-db.c: Revert 2001-04-26 change for debugging output.
2289 * lin-lwp.c: Add set/show debug lin-lwp command. Use this
2290 command to turn extra debugging output on / off.
2294 * buildsym.c (start_subfile): Use FILENAME_CMP instead of STREQ.
2295 (top-level): #include filenames.h.
2297 * dwarf2read.c (dwarf2_start_subfile): Use IS_ABSOLUTE_PATH and
2298 FILENAME_CMP, to DTRT on non-Posix platforms.
2299 (top-level): #include filenames.h.
2304 * gdbtypes.c (check_stub_method): Always initialize ``p''.
2308 * configure.host: Delete romp host.
2313 * TODO: Updates to 5.1. No more targets to obsolete.
2317 (Changes from Kevin Buettner, with minor update by Don Howard.)
2319 * i387-nat.c (i387_supply_fxsave, i387_fill_fxsave, i387_tag): Fix
2320 typos in which hexadecimal constants were really intended to be
2322 (i387_tag): Swap logic regarding zero vs non-zero exponents.
2323 * MAINTAINERS (Misc): Added myself to the write-after-approval
2328 (Changes from Daniel Berlin, with revisions by Jim Blandy.)
2330 Abstract out operations specific to particular C++ ABI's, and
2331 invoke them through a function table. This removes the C++ ABI
2332 dependencies scattered throughout the code, and allows us to
2333 cleanly add support for new C++ ABI's.
2334 * cp-abi.h, cp-abi.h, gnu-v2-abi.c, hpacc-abi.c: New files.
2335 * c-typeprint.c, c-valprint.c, dbxread.c, eval.c, gdbtypes.c,
2336 jv-typeprint.c, linespec.c, symtab.c, typeprint.c, valops.c:
2337 #include "cp-abi.h". These files all use functions now declared
2339 * symtab.h (OPNAME_PREFIX_P, VTBL_PREFIX_P, DESTRUCTOR_PREFIX_P):
2340 Deleted. These services are now provided by functions declared in
2342 * value.h (value_rtti_type, value_virtual_fn_field): Same.
2343 * values.c (value_virtual_fn_field): Same, for this definition.
2344 * valops.c (value_rtti_type): Same.
2345 * c-typeprint.c (c_type_print_base): Use the functions from
2346 "cp-abi.h", instead of the old macros, or hard-coded ABI-specific
2348 * dbxread.c (record_minimal_symbol): Same.
2349 * gdbtypes.c (get_destructor_fn_field, virtual_base_index,
2350 virtual_base_index_skip_primaries): Same.
2351 * jv-typeprint.c (java_type_print_base): Same.
2352 * linespec.c (find_methods, decode_line_1): Same.
2353 * symtab.c (gdb_mangle_name): Same.
2354 * Makefile.in (SFILES): Add the new .c files mentioned above.
2355 (cp_abi_h): New variable.
2356 (COMMON_OBS): Add gnu-v2-abi.o, hpacc-abi.o, and cp-abi.o.
2357 (cp-abi.o, gnu-v2-abi.o, hpacc-abi.o): New targets.
2358 (c-typeprint.o, c-valprint.o, dbxread.o, eval.o, gdbtypes.o,
2359 jv-typeprint.o, symtab.o, linespec.o, typeprint.o, valops.o): Add
2360 dependency on $(cp_abi_h).
2364 * thread-db.c (_initialize_thread_db): Add set/show command
2365 "debug-linux-threads" for debugging output.
2366 * lin-lwp.c (various): Use global "debug_linux_threads to
2367 turn on extra debugging output.
2368 * lin-lwp.c: Minor cleanups in comments.
2369 * target.c (normal_pid_to_str): Get rid of an ancient hack.
2370 * remote.c (remote_pid_to_str): New function for remote target.
2374 * c-typeprint.c (c_type_print_cv_qualifier): Don't print `const'
2375 qualifier on C++ references; all references are innately const.
2379 * event-top.h: Fix formatting.
2383 * source.c (openp): Obsolete #ifdef MPW code.
2384 (open_source_file): Ditto.
2385 * event-top.c (display_gdb_prompt): Ditto.
2386 * utils.c (query): Ditto.
2387 (init_page_info): Ditto.
2388 (init_page_info): Delete #ifndef MPW.
2389 * top.c (gdb_readline): Ditto.
2390 * mac-xdep.c: Obsolete.
2391 * mac-gdb.r: Obsolete.
2392 * config/powerpc/xm-mpw.h: Obsolete.
2393 * config/xm-mpw.h: Obsolete.
2394 * mpw-make.sed: Obsolete.
2395 * mpw-config.in: Obsolete.
2401 * i386-tdep.c (i386_frameless_function_invocation): New function.
2402 * config/i386/tm-i386.h (FRAMELESS_FUNCTION_INVOCATION): Redefine
2403 in terms of i386_frameless_function_invocation. Adjust comment.
2404 (i386_frameless_function_invocation): New prototype.
2408 * top.c (gdb_init): Don't call cli_out_new() to
2409 create global uiout if init_ui_hook is set. uiout will
2410 have to be initialized there.
2414 * arch-utils.c: Include "regcache.h".
2418 * i386-tdep.c (i386_saved_pc_after_call): New function.
2419 * config/i386/tm-i386.h (SAVED_PC_AFTER_CALL): Redefine in terms
2420 of i386_saved_pc_after_call.
2421 (i386_saved_pc_after_call): New prototype.
2425 * i386-nat.c: Fix typo in comment.
2426 * solib.c (no_shared_libraries): New function. Discard all symbols
2427 from shared libraries.
2428 (_initialize_solib): Add command "nosharedlibrary" as complement
2429 to the command "sharedlibrary". Unloads symbols for all solibs.
2433 * configure.host (m68030-sony-*, m68*-isi-*, m68*-sony-*):
2434 * configure.tgt (m68*-rom68k-*, m68*-*bug-*, m68*-monitor-*)
2435 (m68*-est-*, m68*-sony-*, m68*-isi-*):
2436 * Makefile.in (xm-news1000.h, tm-news.h, xm-news.h): Obsolete..
2437 * config/m68k/xm-news.h: Obsolete.
2438 * config/m68k/tm-news.h:
2439 * config/m68k/xm-news1000.h: Obsolete.
2440 * config/m68k/news.mh: Obsolete.
2441 * config/m68k/news.mt: Obsolete.
2442 * config/m68k/nm-news.h: Obsolete.
2443 * config/m68k/news1000.mh: Obsolete.
2444 * news-xdep.c: Obsolete.
2445 * Makefile.in (isi-xdep.o): Obsolete.
2446 (ALLDEPFILES): Delete isi-xdep.c.
2447 (tm-isi.h): Obsolete.
2448 * m68k-tdep.c (altos_skip_prologue): Update comments.
2449 (isi_skip_prologue): Obsolete.
2450 * isi-xdep.c: Obsolete.
2451 * config/m68k/xm-isi.h: Obsolete.
2452 * config/m68k/isi.mh: Obsolete.
2453 * config/m68k/tm-isi.h: Obsolete.
2454 * config/m68k/isi.mt: Obsolete.
2461 * remote.c (remote_open_1): On opening the remote target, activate
2462 the solib_create_inferior_hook, so that it can detect when the
2463 target loads shared libraries.
2464 (remote_async_open_1): Ditto.
2468 * breakpoint.c (print_one_breakpoint): Handle 64-bit addresses.
2469 * tracepoint.c (tracepoints_info): Handle 64-bit addresses.
2470 * testsuite/gdb.trace/deltrace.exp: Allow for 64-bit addresses.
2471 * testsuite/gdb.trace/infotrace.exp: Ditto.
2472 * testsuite/gdb.trace/passcount.exp: Ditto.
2473 * testsuite/gdb.trace/while-stepping.exp: Ditto.
2477 * thread-db.c (check_thread_signals): When looping over all
2478 signals, ignore signal zero.
2479 (disable_thread_signals): Ditto.
2483 * thread.c (do_captured_thread_select): Allow the argument to the
2484 thread command to be an expression rather than a literal integer.
2488 * i386-linux-tdep.c (i386_linux_saved_pc_after_call): Use
2489 read_memory_unsigned_integer instead of read_memory_integer.
2493 * solib-aix5.c (map_index_vs_section_name_okay): New function.
2494 (aix5_relocate_main_executable): Don't use file offsets for
2495 determining corresponding sections and map file entries. Call
2496 map_index_vs_section_name_okay() to do this instead.
2500 * procfs.c (open_with_retry): New function.
2501 (open_procinfo_files, load_syscalls, proc_iterate_over_mappings)
2502 (proc_get_LDT_entry): Call open_with_retry() instead of open().
2506 * ia64-linux-nat.c (ia64_linux_stopped_by_watchpoint): Adjust
2507 comparison against TRAP_HWBKPT constant yet again to account
2508 for the various values used by different kernel versions.
2512 * demangle.c (_initialize_demangler): Use xcalloc on the
2513 demangling_style_names, and make it a null terminated array of
2514 names, to avoid a crash.
2518 * i386-tdep.c (i386_frame_chain): New function.
2519 * config/i386/tm-i386.h (FRAME_CHAIN): Redefine in terms of
2521 (i386_frame_chain): New prototype.
2525 * target.h (target_ops): Removed to_core_file_to_sym_file vector
2527 * corelow.c (core_ops): Updated for above change.
2528 * gnu-nat.c (core_ops): Likewise.
2529 * inftarg.c (child_ops): Likewise.
2530 * monitor.c (monitor_ops): Likewise.
2531 * ppc-bdm.c (bdm_ppc_ops): Likewise.
2532 * remote-adapt.c (adapt_ops): Likewise.
2533 * remote-bug.c (bug_ops): Likewise.
2534 * remote-e7000.c (e7000_ops): Likewise.
2535 * remote-eb.c (eb_ops): Likewise.
2536 * remote-es.c (es1800_ops, es1800_child_ops): Likewise.
2537 * remote-mm.c (mm_ops): Likewise.
2538 * remote-nindy.c (nindy_ops): Likewise.
2539 * remote-nrom.c (nrom_ops): Likewise.
2540 * remote-os9k.c (rombug_ops): Likewise.
2541 * remote-rdp.c (remote_rdp_ops): Likewise.
2542 * remote-sim.c (gdbsim_ops): Likewise.
2543 * remote-st.c (st2000_ops): Likewise.
2544 * v850ice.c (v850ice_ops): Likewise.
2545 * target.c (cleanup_target): Likewise
2546 (update_current_target): Likewise.
2547 (setup_target_debug): Likewise
2548 (debug_to_core_file_to_sym_file): Removed.
2550 * corefile.c (core_file_command) [HPUXHPPA]: Removed code that
2551 sets symbol file from information obtained from the core file.
2552 * corelow.c (core_file_to_sym_file): Removed.
2557 Fixed Insight on Solaris. It was not possible to debug a process
2558 because of EINTR "errors".
2559 * procfs.c: (procfs_wait): if proc_wait_for_stop() fails
2560 with EINTR, retry the call.
2564 * solib-aix5.c (enum maptype): Delete.
2565 (struct lm_info): Add new member ``nmappings''. Make ``mapping''
2566 member a pointer instead of a statically sized array.
2567 (build_so_list_from_mapfile): Dynamically allocate ``mapping''
2569 (aix5_relocate_main_executable, aix5_relocate_section_addresses,
2570 aix5_find_global_pointer): Search for correct mapping to use
2571 based on file offset instead of knowledge of whether the section
2572 is read-only or read/write.
2573 (aix5_find_gate_addresses): Use the first mapping instead of
2574 the (now defunct) MT_READONLY mapping.
2578 * xcoffread.c (scan_xcoff_symtab): Ignore symbols beginning with
2583 * config/i386/fbsd.mh (NATDEPFILES): Add i386-nat.o.
2587 Obsolete i[3456]86-*-sunos* (aka Sun386) host and target.
2588 * config/i386/sun386.mh: Obsolete.
2589 * config/i386/sun386.mt: Obsolete.
2590 * config/i386/xm-sun386.h: Obsolete.
2591 * config/i386/tm-sun386.h: Obsolete.
2592 * config/i386/nm-sun386.h: Obsolete.
2593 * Makefile.in (ALLDEPFILES): Delete sun386-nat.c.
2594 (sun386-nat.o): Target is obsolete.
2595 * sun386-nat.c: Obsolete.
2596 * configure.tgt (i[3456]86-*-sunos*): Obsolete.
2597 * configure.host (i[3456]86-*-sunos*): Obsolete.
2603 * maint.c: Fix typo in comment.
2607 * MAINTAINERS: Swap with Syd Polk as a gdbtk maintainer.
2611 * fork-child.c (fork_inferior, clone_and_follow_inferior):
2612 Document fact that apparent call to vfork() might actually be
2613 a call to fork() instead.
2614 * ser-pipe.c (pipe_open): Likewise.
2618 * printcmd.c (print_frame_args): Use a cleanup to invoke
2619 ui_out_list_end() so that the list count nesting flag will
2620 be decremented properly when an error occurs.
2621 * stack.c (print_frame): Likewise.
2625 * dcache.c (dcache_write_line): Fixed bugs where cache line was
2626 not written to target correctly.
2628 * gdbserver/low-hppabsd.c (read_inferior_memory): Add explicit
2630 * gdbserver/low-nbsd.c: Likewise.
2631 * gdbserver/low-sparc.c: Likewise.
2632 * gdbserver/low-sun3.c: Likewise.
2636 * config/rs6000/nm-rs6000.h (PTRACE_ATTACH): Don't define.
2637 (PTRACE_DETACH): Don't define.
2641 * arch-utils.c (default_prepare_to_proceed)
2642 (generic_prepare_to_proceed): Added new functions.
2643 * arch-utils.h: New function declarations for
2644 default_prepare_to_proceed() and generic_prepare_to_proceed().
2645 * gdbarch.sh: Added PREPARE_TO_PROCEED.
2646 * gdbarch.c: Regenerated.
2647 * gdbarch.h: Regenerated.
2648 * inferior.h: Added get_last_target_status() declaration.
2649 * infrun.c (get_last_target_status): Added new function.
2650 (handle_inferior_event): Saves last pid and waitstatus, which will
2651 get returned by get_last_target_status().
2653 * hppa-tdep.c (prepare_to_proceed): Added comment stating that
2654 prepare_to_proceed() is potentially redundant since
2655 default_prepare_to_proceed() has been added.
2656 * linux-thread.c (prepare_to_proceed): Ditto.
2657 * lin-lwp.c (prepare_to_proceed): Ditto.
2658 * m3-nat.c (prepare_to_proceed): Ditto.
2662 Obsolete powerpcle-*-cygwin* and powerpcle-*-solaris* platforms
2663 and powerpc-*-netware* target.
2664 * configure.host (powerpcle-*-cygwin*, powerpcle-*-solaris*):
2666 * configure.tgt (powerpc-*-netware*, powerpcle-*-cygwin*)
2667 (powerpcle-*-solaris*): Obsolete.
2668 * config/powerpc/tm-cygwin.h: Obsolete.
2669 * config/powerpc/cygwin.mt: Obsolete.
2670 * config/powerpc/xm-cygwin.h: Obsolete.
2671 * config/powerpc/cygwin.mh: Obsolete.
2672 * config/powerpc/nm-solaris.h: Obsolete.
2673 * config/powerpc/xm-solaris.h: Obsolete.
2674 * config/powerpc/tm-solaris.h: Obsolete.
2675 * config/powerpc/solaris.mt: Obsolete.
2676 * config/powerpc/tm-ppc-nw.h: Obsolete.
2677 * config/powerpc/ppc-nw.mt: Obsolete.
2683 * buildsym.c (record_line): Turn off unused addr bits.
2688 * inferior.h: Fix declarations of get_inferior_args and
2689 set_inferior_args, which were missing the trailing 's'.
2693 * monitor.c (monitor_supply_register): Only report an error if we
2694 don't get a valid value.
2698 * README: Don't mention gdba.el.
2703 * top.c (init_main): set prompt if annotation_level>1,
2704 this is necessary when annotation_level is set to 2 via
2705 --annotate=2 command line option.
2709 Obsolete a29k-*-* host and a29k-*-sym1* and a29k-*-kern* targets.
2710 * configure.tgt (a29k-*-sym1*, a29k-*-kern*): Obsolete.
2711 * configure.host (a29k-*-*): Obsolete.
2712 * Makefile.in (ALLDEPFILES): Remove ultra3-nat.c and
2714 (ultra3-nat.o, ultra3-xdep.o): Obsolete.
2715 * config/a29k/tm-ultra3.h: Obsolete.
2716 * config/a29k/ultra3.mt: Obsolete.
2717 * config/a29k/ultra3.mh: Obsolete.
2718 * config/a29k/nm-ultra3.h: Obsolete.
2719 * config/a29k/xm-ultra3.h: Obsolete.
2720 * ultra3-xdep.c: Obsolete.
2721 * ultra3-nat.c: Obsolete.
2722 * config/a29k/a29k-kern.mt: Obsolete.
2728 * main.c: Remove windows.h use.
2729 (gdbtk_test): Use PATH_MAX for home var calculation.
2730 * remote-e7000.c (e7000_parse_device): Accomodate Cygwin as well as
2731 Win32 in colon test.
2732 * ser-tcp.c: Use modern __CYGWIN__ conditional.
2733 * source.c (mod_path): Add __CYGWIN__ conditional to WIN32 test.
2735 * symfile.c (symfile_bfd_open): Ditto.
2739 * main.c (captured_main): For GDBtk, don't use tui_fileopen().
2740 Handle all stream setup in gdbtk_init
2744 * i386-tdep.c (i386_extract_return_value): Don't return the return
2745 value of a void function.
2746 (i386_store_return_value): Likewise.
2750 Obsolete w65-*-* target.
2751 * configure.tgt (w65-*-*): Obsolete.
2752 * config/w65/w65.mt: Obsolete.
2753 * config/w65/tm-w65.h: Obsolete.
2754 * w65-tdep.c: Obsolete.
2755 * NEWS: Update. Fix TiC80 description.
2760 Obsolete tic80-*-* target.
2761 * configure.tgt (tic80-*-*): Obsolete.
2762 * config/tic80/tic80.mt: Obsolete.
2763 * config/tic80/tm-tic80.h: Obsolete.
2764 * tic80-tdep.c: Obsolete.
2770 * remote-mips.c (S_IROTH): Moved definition from here.
2771 * gdb_stat.h (S_IROTH): to here.
2773 * remote.c (remote_protocol_e, remote_protocol_E): Define.
2774 (set_remote_protocol_e_packet_cmd)
2775 (set_remote_protocol_E_packet_cmd)
2776 (show_remote_protocol_e_packet_command)
2777 (show_remote_protocol_E_packet_command): New functions.
2778 (init_all_packet_configs): Initialize remote_protocol_e and
2780 (remote_resume, remote_async_resume): Support e/E command
2782 (show_remote_cmd): Show state of remote_protocol_e and
2784 (_initialize_remote): Add "set remote step-over-range-packet"
2785 and "set remote step-over-range-w-signal-packet" to CLI.
2789 Obsolete ns32k-*-mach3*, ns32k-umax-*, ns32k-utek-sysv* and
2791 * Makefile.in (ALLDEPFILES): Delete umax-xdep.c and ns32km3-nat.c.
2792 (umax-xdep.o, ns32km3-nat.o): Obsolete.
2793 * configure.tgt (ns32k-*-mach3*, ns32k-utek-sysv*, ns32k-utek-*):
2795 * configure.host (ns32k-*-mach3*, ns32k-umax-*, ns32k-utek-sysv*):
2797 * config/ns32k/merlin.mh: Obsolete.
2798 * config/ns32k/merlin.mt: Obsolete.
2799 * config/ns32k/xm-merlin.h: Obsolete.
2800 * config/ns32k/tm-merlin.h: Obsolete.
2801 * config/ns32k/nm-umax.h: Obsolete.
2802 * config/ns32k/umax.mh: Obsolete.
2803 * config/ns32k/umax.mt: Obsolete.
2804 * config/ns32k/xm-umax.h: Obsolete.
2805 * umax-xdep.c: Obsolete.
2806 * config/ns32k/ns32km3.mh: Obsolete.
2807 * config/ns32k/ns32km3.mt: Obsolete.
2808 * config/ns32k/tm-ns32km3.h: Obsolete.
2809 * config/ns32k/xm-ns32km3.h: Obsolete.
2810 * ns32km3-nat.c: Obsolete.
2811 * ns32k-tdep.c (merlin_skip_prologue): Obsolete.
2812 (merlin_frame_num_args): Ditto.
2818 * config/djgpp/fnchange.lst: Tweak due to
2819 expect/example/chesslib.c.
2823 * m88k-tdep.c (examine_prologue): Change type of ``insn'' from
2824 unsigned int to unsigned long. Also, fix format string.
2825 (pop_frame): Fix PC_IN_CALL_DUMMY() call so that it doesn't
2826 use an undeclared variable. Also, delete declaration and
2827 initialization of ``fp'' because it is otherwise unused.
2828 * remote-bug.c (sleep): Delete declaration.
2829 (bug_store_register, bug_write_memory, bug_read_memory)
2830 (bug_insert_breakpoint, bug_remove_breakpoint): Fix sprintf()
2831 format statements and cast certain sprintf() arguments to
2833 (bug_load): Likewise for call to printf_filtered().
2834 * config/m88k/tm-m88k.h (FIX_CALL_DUMMY): Eliminate
2835 assignment to ``pc''. The necessary assignment is done in
2836 hand_function_call() after the invocation of FIX_CALL_DUMMY().
2840 * symtab.c (completion_list_add_name): Remove duplicate string checks,
2841 readline already does this, and it's much faster at it, too.
2845 * go32-nat.c: Minor tweaks, to pacify the ari script.
2849 * i386-tdep.c (i386_extract_struct_value_address): New function.
2850 * config/i386/tm-i386.h (EXTRACT_STRUCT_VALUE_ADDRESS): Redefine
2851 in terms of i386_extract_struct_value_address.
2852 (i386_extract_struct_value_address): New prototype.
2854 * i386-linux-nat.c (i386_linux_dr_get): Change type of return
2855 value to `unsigned long'. Change type of `value' to `unsigned
2857 (i386_linux_dr_set): Change type of second argument to `unsigned
2859 (i386_linux_dr_set_control): Change type of first argument to
2861 (i386_linux_dr_get_status): Change type of return value to
2863 * config/i386/nm-linux.h (i386_linux_dr_set_control,
2864 i386_linux_dr_get_status): Adjust prototypes accordingly.
2868 * ia64-linux-nat.c (ia64_linux_stopped_by_watchpoint): Change
2869 TRAP_HWBKPT constant to match that in the kernel headers for
2874 * i386bsd-nat.c: Include "gdb_assert.h".
2875 [HAVE_PT_GETDBREGS] (DBREG_DRX): Define if not
2877 [HAVE_PT_GETDBREGS] (i386bsd_dr_set, i386bsd_dr_set_control,
2878 i386bsd_dr_set_addr, i386bsd_dr_reset_addr,
2879 i386bsd_dr_get_status): New functions.
2880 * config/i386/nm-fbsd.h [HAVE_PT_GETDBREGS]
2881 (I386_USE_GENERIC_WATCHPOINTS): Define.
2882 Include "i386/nm-i386.h".
2883 (I386_DR_LOW_SET_CONTROL, I386_DR_LOW_SET_ADDR,
2884 I386_DR_LOW_RESET_ADDR, I386_DR_LOW_GET_STATUS): New macros.
2885 (i386bsd_dr_set_control, i386bsd_dr_set_addr,
2886 i386bsd_dr_reset_addr, i386bsd_dr_get_status): New prototypes.
2887 * acconfig.h (HAVE_PT_GETDBREGS): New configure macro.
2888 * configure.in: Cleanup a few comments. Check for PT_GETDBREGS
2890 * config.in, configure: Regenerate.
2892 * i386-nat.c (i386_insert_aligned_watchpoint): Set address
2893 register before enabling it by setting the control register.
2894 (i386_remove_aligned_watchpoint): Reset address register after
2895 disabling it by setting the control register.
2897 * i386-tdep.c (i386_extract_return_value): If the type of the
2898 return value is TYPE_STRUCT and the number of fields is one, call
2899 ourselves with TYPE set tp the type of the first field.
2900 (i386_store_return_value): Likewise.
2901 This fixes a problem with returning structs consisting of a single
2902 `float' or `double' on *BSD.
2906 * lin-lwp.c (lin_lwp_resume): Don't mark LWP as not stopped until
2907 we're absolutely sure we're going to resume it.
2909 * thread-db.c (check_event): Don't report an error if we encounter
2910 a thread creation event for a thread that's already in the thread
2911 list, since that may legitemately happen. Instead only call
2912 attach_thread if it's not already in the thread list.
2916 * config/pa/xm-hppah.h (malloc): Really delete declaration
2917 (MALLOC_INCOMPATIBLE): Really delete macro.
2918 * cli/cli-cmds.c (apropos_command): Use xcalloc.
2922 * configure.in (build_warnings): Add -Wuninitialized.
2923 * configure: Regenerate.
2925 * v850-tdep.c (v850_scan_prologue): Initialize ``insn2''.
2926 * sparc-tdep.c (sparc64_push_arguments): Add default case to
2928 * sh-tdep.c (sh_do_fp_register): Replace ``?:'' printf format
2929 expression with if statement.
2930 * mn10200-tdep.c (mn10200_analyze_prologue): Initialize
2932 * mips-tdep.c (show_mipsfpu_command): Add default case to switch.
2933 (mips_dump_tdep): Fix setting of ef_mips_arch.
2934 * mcore-tdep.c (mcore_analyze_prologue): Initialize ``fp_regnum''.
2935 * dsrec.c (make_srec): Always initialize ``binbuf''.
2936 * monitor.c (monitor_read_memory_single): Do not pass an
2937 uninitialized buffer to monitor_error. Make ``i'' more local.
2941 * MAINTAINERS: Change ns32k target to ,-Werror.
2943 * ns32k-tdep.c: Include "gdbcore.h"
2944 (flip_bytes): Change first argument to void*. Add forward
2946 (sign_extend): Add declaration.
2947 (merlin_frame_num_args): Add final else clause to if-else chain.
2948 (umax_frame_num_args): Ditto.
2949 * config/ns32k/tm-umax.h (ns32k_localcount): Declare.
2950 (flip_bytes): Ditto.
2954 * i386-linux-tdep.c (FRAMELESS_SIGNAL): Moved here from
2955 config/i386/nm-linux.h (including comment).
2956 (i386_linux_frame_chain): New function implementing guts of the
2957 former FRAME_CHAIN macro, but using read_memory_unsigned_integer
2958 instead of read_memory_integer.
2959 (i386_linux_frame_saved_pc): Removed doc pointing to
2960 i386/tm-linux.h for an explanation of FRAMELESS_SIGNAL since that
2961 now lives in this file.
2962 * config/i386/tm-linux.h (FRAMELESS_SIGNAL): Moved to
2963 i386-linux-tdep.c (including comment).
2964 (FRAME_CHAIN): Redefined in terms of i386_linux_frame_chain.
2965 (i386_linux_frame_chain): New prototype.
2967 * gdbserver/low-linux.c [I386_GNULINUX_TARGET]: Cleanup code and
2969 (NUM_FREGS): Redefine to 0.
2970 (NUM_REGS): Redefine as NUM_GREGS.
2971 (i386_register_byte, i386_register_raw_size): Update from
2972 i386-tdep.c. Add comment about their origin.
2973 (regmap, register_u_addr): Take these from i386-linux-nat.c.
2974 (i386_register_u_addr): Removed.
2976 * i386-linux-nat.c (i386_linux_dr_get): Return 0 if ptrace call
2977 fails instead of calling perror_with_name. This should fix
2978 debugging remote i386 targets with a native Linux/x86 GDB. Add
2979 FIXME for this hack.
2983 * arch-utils.c (#include "gdbthread.h"): Removed.
2984 (#include "symfile.h"): Removed.
2985 (XMALLOC): Removed unused macro.
2986 * breakpoint.c (tbreak_command): Removed local declaration.
2987 (awatch_command, do_enable_breakpoint, set_breakpoint_count):
2988 Remove duplicate declarations.
2989 (bpstat_should_step, bpstat_have_active_hw_watchpoints)
2990 (remove_solib_event_breakpoints): Fix indentation botch.
2991 * c-typeprint.c (#include "command.h"): Removed.
2992 (#include "gdbcmd.h"): Removed.
2993 * ch-exp.c (ch_terminal_match_float_literal, parse_expr)
2994 (parse_primval, parse_untyped_expr, parse_opt_untyped_expr):
2995 Removed duplicate declarations.
2996 * ch-typeprint.c (#include "command.h"): Removed.
2997 (#include "gdbcmd.h"): Removed.
2998 * corefile.c (#include "frame.h"): Removed
2999 (#include "symfile.h"): Removed.
3000 (#include "language.h"): Removed.
3001 * dbxread.c (#include "command.h"): Removed.
3002 * environ.c (#include "gdbcore.h"): Removed.
3003 * event-loop.c (#include "top.h"): Removed.
3004 * f-typeprint.c (#include "command.h"): Removed.
3005 (#include "gdbcmd.h"): Removed.
3006 (#include "language.h"): Removed.
3007 (#include "typeprint.h"): Removed.
3008 (#include "frame.h"): Removed.
3009 * gdbtypes.h (print_type_scalar): Removed declaration.
3010 * infcmd.c (#include "completer.h"): Removed.
3011 * language.c (#include "frame.h"): Removed.
3012 * m2-typeprint.c (#include "command.h"): Removed.
3013 (#include "gdbcmd.h"): Removed.
3014 (#include "language.h"): Removed.
3015 * m2-valprint.c (#include "valprint.h"): Removed.
3016 * p-typeprint.c (#include "command.h"): Removed.
3017 (#include "gdbcmd.h"): Removed.
3018 * p-valprint.c (#include "typeprint.h"): Removed.
3019 * parse.c (#include "linespec.h"): Removed.
3020 * regcache.c (#include "frame.h"): Removed.
3021 * remote.c (#include "frame.h"): Removed.
3022 (getpkt_sane): Make static.
3023 * source.c (#include "completer.h"): Removed.
3024 * stack.c (#include "symfile.h"): Removed.
3025 (#include "objfiles.h"): Removed.
3026 * symfile.c (#include "completer.h"): Removed.
3027 * tracepoint.c (#include "completer.h"): Removed.
3028 * values.c (#include "frame.h"): Removed.
3029 * varobj.c (#include "valprint.h"): Removed.
3030 * wrapper.c (#include "frame.h"): Removed.
3032 * memattr.c (create_mem_region): Removed unused variable.
3033 * remote-nrom.c: Removed spurious semicolon after init_nrom_ops.
3037 * remote-rdp.c (rdp_set_command_line): Add missing double quote.
3041 * solib-aix5.c (build_so_lib_from_mapfile): Use xfree() instead
3046 * TODO (Cleanups): Remove the item about converting docs to GFDL.
3050 * ia64-tdep.c (slotN_contents, replace_slotN_contents): Change
3051 type of ``bundle'' from unsigned char * to char *.
3052 (ia64_get_saved_register): Use alloca() to allocate register
3055 * solib-aix5.c (build_so_lib_from_mapfile): Fix xasprintf() usage.
3059 * proc-utils.h (procfs_ctl_t): New typedef.
3060 * proc-api.c (write_with_trace): Change type of ``opcode'' from
3061 long to procfs_ctl_t. Don't assume that the target has defined
3062 BREAKPOINT. Handle case in which PCRESET is the same as PCUNSET.
3063 * proc-events.c (sys/syscall.h, sys/fault.h): Include conditionally.
3064 * procfs.c (sys/fault.h, sys/syscall.h): Include conditionally.
3065 (gdb_sigset_t, gdb_sigaction_t, gdb_siginfo_t, gdb_premptysysset)
3066 (gdb_praddsysset, gdb_prdelsysset, gdb_pr_issyssetmember):
3067 Conditionally define as appropriate for AIX/non-AIX systems. Use
3068 these defines/typedefs as appropriate elsewhere in file.
3069 (struct procinfo): Change type of saved_sigset and saved_sighold
3070 from sigset_t to gdb_sigset_t. Make saved_exitset and
3071 saved_entryset pointer variables. Add two new fields, num_syscalls
3073 (DYNAMIC_SYSCALLS): Define when HAVE_PRSYSENT_T is defined.
3074 (sysset_t_size, sysset_t_alloc): New functions.
3075 (load_syscalls, free_syscalls, find_syscall): New functions for
3076 platforms which define DYNAMIC_SYSCALLS.
3077 (create_procinfo): Call load_syscalls.
3078 (destroy_one_procinfo): Call free_syscalls.
3079 (GDBRESET): Don't define twice.
3080 (proc_modify_flag): Change type of operation code array `arg'
3081 from long to procfs_ctl_t.
3082 (proc_stop_process, proc_wait_for_stop, proc_run_process)
3083 (proc_set_traced_signals, proc_set_traced_faults)
3084 (proc_set_traced_sysentry, proc_set_traced_sysexit)
3085 (proc_set_held_signals, proc_clear_current_fault)
3086 (proc_set_current_signal, proc_clear_current_signal, proc_set_gregs)
3087 (proc_set_fpregs, proc_kill, proc_set_watchpoint): Likewise for `cmd'.
3088 (proc_set_traced_sysentry): Dynamically allocate variable sized
3089 struct gdb_proc_ctl_pcsentry. Also, free it at function exit.
3090 (proc_set_traced_sysexit): Dynamically allocate variable
3091 sized struct gdb_proc_ctl_pcsexit. Also, free it at
3093 (proc_get_traced_sysentry, proc_get_traced_sysexit): Add new code
3094 for reading the sysset_t struct on AIX5.
3095 (procfs_debug_inferior): Don't assume that SYS_exit will be
3096 defined. Add new code for finding certain syscalls on AIX5.
3097 (syscall_is_lwp_exit, syscall_is_exit, syscall_is_exec)
3098 (syscall_is_lwp_create): New functions.
3099 (procfs_wait): Restructured code which checks for certain
3100 system calls to use the new syscall_is_... functions.
3101 (procfs_notice_signals): Account for the fact that saved_entryset
3102 and saved_exitset in struct procinfo are now pointers.
3106 * symtab.c (find_pc_sect_line): Revise method used for finding
3111 * i386-linux-tdep.c (i386_linux_sigtramp_saved_pc,
3112 i386_linux_sigtramp_saved_sp): Make static.
3113 (i386_linux_frame_saved_pc): New function based on the old
3114 FRAME_SAVED_PC macro, but use read_memory_unsigned_integer instead
3115 of read_memory_integer.
3116 * config/i386/tm-linux.h (sigtramp_saved_pc): Remove definition.
3117 (i386_linux_sigtramp_saved_pc): Remove prototype.
3118 (FRAME_SAVED_PC): Redefine in terms of i386_linux_frame_saved_pc.
3119 (i386_linux_frame_saved_pc): New prototype.
3123 * MAINTAINERS: Document m88k as a ``Known problem in 5.1''.
3124 * TODO (GDB 5.1 - Cleanups): Update.
3128 * fork-child.c (clone_and_follow_inferior): Delete #ifdef
3133 * config/i386/tm-symmetry.h (PUSH_ARGUMENTS): #undef.
3135 * i386-tdep.c (i386_push_arguments, i386_store_struct_return): New
3137 * config/i386/tm-i386.h (PUSH_ARGUMENTS): New macro.
3138 (STORE_STRUCT_RETURN): Redefine in terms of
3139 i386_store_struct_return.
3140 (i386_push_arguments, i386_store_struct_return): New prototypes.
3141 * config/i386/tm-i386v.h (STORE_STRUCT_RETURN): Remove. It's
3142 definition was identical to the definition in "i386/tm-i386.h" so
3143 the new definition should suffice too.
3147 * event-loop.c (toplevel) [!HAVE_POLL] [NO_FD_SET]: Remove unused
3148 definitions for SELECT, NBBY, FD_SETSIZE, NFDBITS, and MASK_SIZE.
3150 * config/djgpp/djconfig.sh: Add copyright notice.
3152 * ser-go32.c (rawclock): Remove prototype; include time.h instead.
3153 (ISR, dos_hookirq, isr_t): Convert K&R definition to ANSI C.
3154 (top level) <string.h>: Include gdb_string.h instead.
3155 (dos_noop, dos_raw, dos_noflush_set_tty_state)
3156 (dos_print_tty_state, dos_info): Remove ATTRIBUTE_UNUSED.
3158 * go32-nat.c (go32_create_inferior): Move the declaration of
3159 `environ' to here from the top level.
3160 (top level) <_initialize_go32_nat>: Remove redundant prototype.
3161 <gdb_string.h>: Include it instead of string.h.
3162 (store_register): Call register_buffer instead of accessing
3163 registers[] directly.
3164 (redir_cmdline_delete, redir_cmdline_parse, redir_to_debugger)
3165 (redir_to_debugger, redir_debug_init) [__DJGPP_MINOR__ < 3]: Put
3166 the function names at the start of the line.
3167 (go32_set_dr): Throw internal_error if the argument is not a valid
3168 debug register number.
3169 (go32_open, go32_close, go32_attach, go32_detach, go32_resume)
3170 (go32_wait, go32_xfer_memory, go32_files_info)
3171 (go32_terminal_info): Remove ATTRIBUTE_UNUSED.
3175 * mips-tdep.c (mips_gdbarch_init): Tweak indentation.
3181 * coffread.c: Include "gdb_assert.h".
3182 (coff_symtab_read): Cast the integer s_sclass to a long before
3183 casting it to a pointer.
3189 * coffread.c (coff_symtab_read): Initialize
3190 ``fcn_first_line_addr''. Check that the ``.bf'' always preceeds
3192 * dbxread.c (find_text_range): Initialize ``start'' and ``end''.
3196 * config/sparc/tm-sp64.h (GDB_MULTI_ARCH): Down grade to
3197 GDB_MULTI_ARCH_PARTIAL from two. SOFTWARE_SINGLE_STEP is not
3200 * gdbarch.sh (SOFTWARE_SINGLE_STEP): Add.
3201 * gdbarch.h, gdbarch.c: Re-generate.
3203 * target.h (SOFTWARE_SINGLE_STEP_P)
3204 (SOFTWARE_SINGLE_STEP): Delete macro definitions.
3208 * gdbarch.sh (gdbarch_register_read, gdbarch_register_write): Add.
3209 * gdbarch.h, gdbarch.c: Regenerate.
3211 * regcache.h (regcache_read, regcache_write): Declare.
3212 (registers, register_valid, register_buffer): Add note that these
3213 interfaces are deprecated.
3215 * regcache.c: Include "gdb_assert.h".
3216 (legacy_write_register_gen): Rename write_register_gen.
3217 (legacy_read_register_gen): Rename read_register_gen.
3218 (regcache_read, regcache_write): New function.
3219 (read_register_gen, write_register_gen): New function.
3220 (write_register): Simplify. Use write_register_gen.
3221 (read_register): Ditto using read_register_gen.
3222 (read_signed_register): Ditto.
3223 (read_register_bytes): Ditto!!!!
3224 (supply_register): Add note that CLEANUP_REGISTER_VALUE is being
3225 replaced by gdbarch_register_read.
3227 * TODO (GDB 5.2 - Cleanups): Add list of gdbarch methods to
3232 Fix from Dan Berlin:
3234 * stabsread.c (read_cpp_abbrev): Properly construct the names of
3235 virtual function table pointer fields.
3239 * defs.h (xfree, mcalloc, mmalloc, mrealloc, mfree, xmmalloc,
3240 xmrealloc): Move existing declarations to the one place and
3241 re-order to be consistent.
3242 (xmcalloc, xmfree): Declare.
3243 (xmmalloc, xmrealoc): Assume ISO-C - use size_t and void* in
3246 * utils.c (size_t): Delete #ifdef defining size_t.
3247 (mmalloc, mrealloc, mcalloc, mfree): Re-order.
3248 (mmalloc, mrealloc, mcalloc): Document as only calls in GDB
3249 corresponding malloc, realloc, calloc.
3250 (mfree): Call free directly.
3251 (xmmalloc, xmrealloc): Clean up. Assume ISO-C.
3252 (xmcalloc, xmfree): New functions. Copy old xcalloc and xfree
3253 function bodies to here.
3254 (xcalloc, xfree): Call xmcalloc and xmfree respectfully.
3258 * fork-child.c (fork_inferior): Make ``argv'', ``exec_file'' and
3259 ``shell_file'' static locals.
3261 * jv-lang.c (java_link_class_type): Initialize ``field'' and
3264 * jv-valprint.c (java_value_print): Initialize ``next_element''.
3268 * config/i386/nm-i386.h: Fix formatting and change reference to
3269 i386-tdep.c to i386-nat.c.
3273 * configure.in: Corrected spelling errors.
3274 * configure: Regenerated.
3278 * TODO (GDB 5.1 - Cleanups): Add more targets to obsolete.
3282 * Makefile.in (NTSSTART): Delete.
3284 (kdb): Delete target.
3285 * kdb-start.c, stuff.c: Mark as obsolete.
3290 * config/pa/xm-hppah.h (HPPA_COMPILER_BUG): Delete. GDB only
3291 compiles using an ISO-C compiler.
3292 (MALLOC_INCOMPATIBLE): Ditto.
3293 * linespec.c (decode_line_1): Delete hack to work around
3298 * exec.c (xfer_memory): Always initialize section.
3299 * infrun.c (normal_stop): Always initialize source_flag.
3303 * TODO (Remote Protocol Support): Review. Add notes about ``!'',
3304 non-use of a continue address and typical use of ``q'' packet.
3308 Make DJGPP use the new unified support for hardware
3309 breakpoints and watchpoints on x86 targets:
3311 * config/i386/nm-go32.h <top level>: Don't include nm-i386v.h,
3312 include nm-i386.h instead.
3313 (TARGET_HAS_HARDWARE_WATCHPOINTS, HAVE_CONTINUABLE_WATCHPOINT)
3314 (TARGET_CAN_USE_HARDWARE_WATCHPOINT, STOPPED_BY_WATCHPOINT)
3315 (TARGET_REGION_OK_FOR_HW_WATCHPOINT, DECR_PC_AFTER_HW_BREAK)
3316 (target_stopped_data_address, target_insert_watchpoint)
3317 (target_remove_watchpoint, target_insert_hw_breakpoint)
3318 (target_remove_hw_breakpoint): Don't define.
3319 (I386_USE_GENERIC_WATCHPOINTS, I386_DR_LOW_SET_CONTROL)
3320 (I386_DR_LOW_SET_ADDR, I386_DR_LOW_RESET_ADDR)
3321 (I386_DR_LOW_GET_STATUS): Define to call appropriate go32_*
3322 functions from go32-nat.c.
3324 * config/i386/go32.mh (NATDEPFILES): Add i386-nat.o.
3326 * go32-nat.c <top level>: Remove prototypes for watchpoint-
3327 related functions. Remove definitions of watchpoint-related
3329 (go32_mourn_inferior): Call i386_cleanup_dregs instead of the
3330 private cleanup_dregs function.
3331 (cleanup_dregs, go32_insert_watchpoint)
3332 (go32_insert_aligned_watchpoint, go32_handle_nonaligned_watchpoint)
3333 (go32_remove_watchpoint, go32_remove_aligned_watchpoint)
3334 (go32_region_ok_for_watchpoint, go32_stopped_by_watchpoint)
3335 (go32_remove_hw_breakpoint, go32_insert_hw_breakpoint): Remove.
3336 (go32_set_dr, go32_set_dr7, go32_get_dr6): New functions.
3340 * ia64-tdep.c (fetch_instruction): Warn about slot numbers greater
3341 than two instead of generating an error.
3345 * cp-valprint.c: Reformat to bring into line with GNU coding
3350 Make Linux use the new unified support for hardware breakpoints
3351 and watchpoints on x86 targets.
3352 * i386-linux-nat.c: Doc fixes. Include "gdb_assert.h".
3353 [HAVE_SYS_DEBUGREG_H]: Include <sys/debugreg.h>.
3354 (DR_FIRSTADDR, DR_LASTADDR, DR_STATUS, DR_CONTROL): Define to
3355 appropriate value if not already defined.
3356 (register_u_addr): New function.
3357 (kernel_u_size): New function.
3358 (i386_linux_dr_get, i386_linux_dr_set): New functions.
3359 (i386_linux_dr_set_control, i386_linux_dr_set_addr,
3360 i386_linux_reset_addr, i386_linux_dr_get_status): New functions.
3361 * config/i386/nm-linux.h: Don't include "nm-i386v.h".
3362 (I386_USE_GENERIC_WATCHPOINTS): Define and include "nm-i386.h".
3363 (TARGET_HAS_HARDWARE_WATCHPOINTS,
3364 TARGET_CAN_USE_HARDWARE_WATCHPOINTS, HAVE_CONTINUABLE_WATCHPOINT,
3365 STOPPED_BY_WATCHPOINT, target_insert_watchpoint,
3366 target_remove_watchpoint): Remove macros.
3367 (i386_stopped_by_watchpoint, i386_insert_watchpoint,
3368 i386_remove_watchpoint): Remove prototypes.
3369 (register_u_addr): New prototype.
3370 (REGISTER_U_ADDR): Define in terms of register_u_addr.
3371 (i386_linux_dr_set_control, i386_linux_dr_set_addr,
3372 i386_linux_reset_addr, i386_linux_dr_get_status): New prototypes.
3373 (I386_DR_LOW_SET_CONTROL, I386_DR_LOW_SET_ADDR,
3374 I386_DR_LOW_RESET_ADDR, I386_DR_LOW_GET_STATUS): New macros.
3375 * config/i386/linux.mh (NATDEPFILES): Replace i386v-nat.o with
3380 Fix from Dan Berlin:
3382 * linespec.c (find_methods): Whitespace differences aren't
3383 significant in *un*mangled method names. Use strcmp_iw to compare
3388 * gdbarch.sh: Allow a non- multi-arch target to override a
3390 * gdbarch.h: Regenerate.
3394 * gdbarch.sh: Avoid use of ``!''.
3398 * target.h (enum target_signal): Move definition from here.
3399 * defs.h (enum target_signal): To here.
3401 * config/arc/tm-arc.h (arc_software_single_step): Change type of
3402 first parameter to enum target_signal.
3403 * config/rs6000/tm-rs6000.h (rs6000_software_single_step): Ditto.
3404 * config/sparc/tm-sparc.h (sparc_software_single_step): Ditto.
3405 * rs6000-tdep.c (rs6000_software_single_step): Update.
3409 * frame.h (SIZEOF_FRAME_SAVED_REGS): Report an error if macro
3413 * stabsread.c (define_symbol): A parameter ('R'), a local ('r'),
3414 or a reference ('a') can be in a pseudo register.
3415 * infcmd.c (do_registers_info): Must take into account the pseudo
3416 registers to print their value.
3417 (registers_info): Likewise.
3418 * stack.c (frame_info): Likewise.
3419 * frame.h (SIZEOF_FRAME_SAVED_REGS): Save the pseudo registers.
3423 Unified support for hardware breakpoints and watchpoints on
3426 * config/i386/nm-i386.h: New file.
3428 * config/i386/nm-i386.h: (i386_cleanup_dregs)
3429 (i386_insert_watchpoint, i386_remove_watchpoint)
3430 (i386_region_ok_for_watchpoint, i386_stopped_by_hwbp)
3431 (i386_stopped_data_address, i386_insert_hw_breakpoint)
3432 (i386_remove_hw_breakpoint): Declare prototypes.
3433 [I386_USE_GENERIC_WATCHPOINTS] (TARGET_CAN_USE_HARDWARE_WATCHPOINT):
3434 Define if not already defined.
3435 (TARGET_REGION_OK_FOR_HW_WATCHPOINT, HAVE_CONTINUABLE_WATCHPOINT)
3436 (STOPPED_BY_WATCHPOINT, target_stopped_data_address)
3437 (target_insert_watchpoint, target_remove_watchpoint)
3438 (target_insert_hw_breakpoint, target_remove_hw_breakpoint): Define
3439 to call the appropriate i386_* functions.
3441 * i386-nat.c: New file.
3443 * i386-nat.c (I386_DR_CONTROL_MASK, I386_DR_LOCAL_ENABLE)
3444 (I386_DR_GLOBAL_ENABLE, I386_DR_DISABLE, I386_DR_SET_RW_LEN)
3445 (I386_DR_GET_RW_LEN, I386_DR_WATCH_HIT): New macros.
3446 (dr_mirror, dr_status_mirror, dr_control_mirror, dr_ref_count)
3447 (maint_show_dr): New variables.
3448 (i386_cleanup_dregs, i386_show_dr, i386_length_and_rw_bits)
3449 (i386_insert_aligned_watchpoint, i386_remove_aligned_watchpoint)
3450 (i386_handle_nonaligned_watchpoint, i386_insert_watchpoint)
3451 (i386_remove_watchpoint, i386_region_ok_for_watchpoint)
3452 (i386_stopped_data_address, i386_stopped_by_hwbp)
3453 (i386_insert_hw_breakpoint, i386_remove_hw_breakpoint): New
3455 (_initialize_i386_nat): New function.
3456 [I386_USE_GENERIC_WATCHPOINTS]: Add new maint command
3457 `show-debug-regs', sets maint_show_dr to non-zero value and
3458 activates debugging print-outs in functions which insert, remove,
3459 and test watchpoints and hardware breakpoints.
3461 * Makefile.in (i386-nat.o): New target.
3462 (ALLDEPFILES): Add i386-nat.o.
3466 * i386-tdep.c: Add back _initialize_i386_tdep prototype with
3467 appropriate comment.
3471 * config/alpha/alpha-linux.mh (NATDEPFILES): Use proc-service.o,
3472 thread-db.o, and lin-lwp.o for thread support instead of
3473 linux-thread.o and lin-thread.o.
3474 * config/alpha/nm-linux.h (PREPARE_TO_PROCEED, GET_THREAD_SIGNALS)
3475 (ATTACH_LWP): Define to use the following lin-lwp.c functions...
3476 (lin_lwp_prepare_to_proceed, lin_thread_get_thread_signals)
3477 (lin_lwp_attach_lwp): Declare.
3481 Fix from Dan Berlin:
3483 * Makefile.in: Clean up dependencies on ../include/demangle.h.
3484 (demangle_h): New variable.
3485 (jv-typeprint.o, jv-valprint.o, linespec.o): Use it.
3489 * target.h (SOFTWARE_SINGLE_STEP_P): Add empty parameter list.
3490 * breakpoint.c (bpstat_stop_status): Update.
3491 * infrun.c (handle_inferior_event): Ditto.
3492 * mips-tdep.c (mips_dump_tdep): Ditto.
3493 * infrun.c (resume): Ditto.
3494 * infptrace.c (child_resume): Ditto.
3495 * config/mips/tm-wince.h (SOFTWARE_SINGLE_STEP_P): Ditto.
3496 * config/sh/tm-wince.h (SOFTWARE_SINGLE_STEP_P): Ditto.
3497 * config/sparc/tm-sparc.h (SOFTWARE_SINGLE_STEP_P): Ditto.
3498 * config/powerpc/tm-linux.h (SOFTWARE_SINGLE_STEP_P): Ditto.
3499 * config/arm/tm-wince.h (SOFTWARE_SINGLE_STEP_P): Ditto.
3500 * config/arc/tm-arc.h (SOFTWARE_SINGLE_STEP_P): Ditto.
3501 * config/powerpc/tm-ppc-eabi.h (SOFTWARE_SINGLE_STEP_P): Ditto.
3505 * config/powerpc/tm-linux.h (SOFTWARE_SINGLE_STEP): Replace abort
3506 with internal_error.
3510 Fix from Dan Berlin:
3512 * linespec.c (find_methods): Just call CHECK_TYPEDEF on t, rather
3513 than asking for sym_class's type; that's circuitous. Remove
3514 sym_class, since the last use of it is gone.
3518 * breakpoint.c (print_it_typical) <bp_access_watchpoint> [UI_OUT]:
3519 Correct the order of calls to ui_out_field_string and
3520 ui_out_list_begin when bs->old_val is NULL.
3524 * configure.in (AC_CHECK_HEADERS): Check for existence of nlist.h.
3525 * configure: Regenerate.
3526 * config.in: Regenerate.
3527 * solib-legacy.c (nlist.h): Include if HAVE_NLIST_H is defined.
3531 * config/i386/i386v42mp.mh (NATDEPFILES): List all files on
3532 same line to avoid problems with Unixware 7's make when building
3537 * defs.h (malloc): Move declaration from here.
3538 * utils.c (malloc): To here.
3539 * config/pa/xm-hppah.h (malloc): Delete declaration.
3541 * gnu-nat.c (make_proc): Use xmalloc instead of malloc.
3542 * hp-psymtab-read.c (hpread_call_pxdb): Ditto.
3543 (hpread_quick_traverse): Ditto.
3544 * infttrace.c (create_thread_info): Ditto.
3545 (kill_inferior): Ditto.
3546 * gnu-nat.c (make_inf): Ditto, and don't check return value.
3547 * procfs.c (proc_update_threads): Ditto.
3548 * valprint.c (print_decimal_chars): Ditto.
3549 * gdbtypes.c (cfront_mangle_name): Use xasprintf instead of
3551 * remote-rdp.c (rdp_set_command_line): Ditto.
3555 * defs.h (realloc): Move declaration from here.
3556 * utils.c (realloc): To here.
3557 * config/pa/xm-hppah.h (realloc): Delete declaration.
3558 * lin-thread.c (insert_thread): Use xrealloc instead of realloc.
3559 * symfile.c (add_filename_language): Ditto.
3560 * event-loop.c (create_file_handler): Ditto.
3564 * defs.h (free): Move declaration from here.
3565 * utils.c (free): To here.
3566 (xfree): Document as the only call to free().
3567 * config/pa/xm-hppah.h (free): Delete declaration.
3571 * config/ia64/linux.mh (NATDEPFILES): Add proc-service.o to
3576 * eval.c (evaluate_subexp): Remove #ifdef __STDC__ and ``inline''.
3577 * config/mips/xm-mips.h (offsetof): Define when !GNUC not !STDC.
3578 * cli/cli-cmds.c (init_cli_cmds): Remove #ifdef __STDC__
3582 * TODO: List known problems with TUI.
3586 * MAINTAINERS: Jimmy Guo stepped down as a maintiner (TUI,
3591 * remote.c (remote_cisco_section_offsets): Do not cast result from
3592 bfd_get_section_name.
3593 (compare_sections_command): Ditto.
3594 (remote_cisco_section_offsets): Make ``p'' a const pointer.
3595 (compare_sections_command): Ditto for ``sectname''.
3600 * valops.c (hand_function_call): Simplify computation of the
3601 address of the pushed argument.
3605 * p-exp.y (parse_number): Avoid shift overflow when ``long''.
3606 Code copied from c-exp.y.
3610 * acconfig.h (HAVE_STRUCT_LINK_MAP_WITH_L_MEMBERS)
3611 (HAVE_STRUCT_LINK_MAP_WITH_LM_MEMBERS)
3612 (HAVE_STRUCT_SO_MAP_WITH_SOM_MEMBERS): New configure macros.
3613 * configure.in (HAVE_STRUCT_LINK_MAP32): Move this test out
3614 of the Solaris procfs testing section. Instead, group with...
3615 (HAVE_STRUCT_LINK_MAP_WITH_L_MEMBERS)
3616 (HAVE_STRUCT_LINK_MAP_WITH_LM_MEMBERS)
3617 (HAVE_STRUCT_SO_MAP_WITH_SOM_MEMBERS): New <link.h> tests.
3618 * configure: Regenerate.
3619 * config.in: Regenerate.
3621 * solib-legacy.c (legacy_svr4_fetch_link_map_offsets): Use
3622 new configure macros to choose which (if any) code to
3623 compile in. Added code to explicitly handle *BSD systems;
3624 these systems were previously handled only through macro
3625 redefinition. Also, due to the way the autoconf tests are set
3626 up, this function will no longer return a non-zero value when
3627 GDB is configured as a cross debugger. I.e, cross debuggers
3628 will no longer be able to "accidentally" get the host system's
3633 * config/i386/nbsd.mh (NATDEPFILES): List all files on the same
3634 line to avoid build problem on NetBSD 1.4.
3638 * win32-nat.c (child_attach): check args for NULL before passing
3639 to strtoul. This fixes PR gdb/43.
3643 * i387-nat.h: Doc Fix.
3645 * i386-tdep.c: Fix formatting.
3646 (i386_get_frame_setup, i386_follow_jump, codestream_read,
3647 codestream_seek, codestream_fill, skip_trampoline_code,
3648 gdb_print_insn_i386, _initialize_i386_tdep): Remove redundant
3653 * config/i386/tm-linux.h (TARGET_ANALYZE_FLOATING): Remove. It's
3654 no longer used. Also remove associated FIXME.
3658 * gdbarch.sh: Add classes ``m'' and ``M'' for pure multi-arch. Do
3659 not generate macro wrappers for multi-arch functions or
3661 (class_is_info_p, class_is_predicate_p): Update.
3662 (class_is_function_p, class_is_variable_p): Ditto.
3663 (class_is_multiarch_p): New class function.
3667 * config/h8300/tm-h8300.h (FRAME_ARGS_ADDRESS): Changed to use
3668 h8300_frame_args_address from frame_args_address.
3669 (FRAME_LOCALS_ADDRESS): Changed to use h8300_frame_locals_address
3670 from frame_locals_address.
3671 (PRINT_REGISTER_HOOK): Changed to use h8300_print_register_hook
3672 from print_register_hook.
3673 (h8300_frame_args_address): Declare.
3674 (h8300_frame_find_saved_regs): Declare.
3675 (h8300_frame_locals_address): Declare.
3676 (h8300_frame_saved_pc): Declare.
3677 (h8300_pop_frame): Declare.
3678 (h8300_print_register_hook): Declare.
3679 * h8300-tdep.c (h8300_frame_find_saved_regs): Removed declaration.
3680 (h8300_frame_args_address): Renamed from frame_args_address.
3681 (h8300_frame_locals_address): Renamed from frame_locals_address.
3682 (h8300_pop_frame): Renamed from pop_frame.
3683 (h8300_print_register_hook): Renamed from print_register_hook.
3687 * solib-svr4.c (bfd_lookup_symbol): Change type of
3688 ``storage_needed'' from unsigned int to long in order to
3689 match return type of bfd_get_symtab_upper_bound() and
3690 bfd_get_dynamic_symtab_upper_bound().
3691 * solib-aix5.c (bfd_lookup_symbol): Likewise. Also, eliminate
3692 REASONABLE_LIMIT hack which had been added to work around this
3697 * solib-aix5.c (bfd_lookup_symbol, build_so_list_from_mapfile)
3698 (aix5_relocate_main_executable, aix5_clear_solib): Replace calls
3699 to free() with calls to xfree().
3700 (bfd_lookup_symbol): Eliminate use of PTR.
3701 (build_so_list_from_mapfile): Use xasprintf() instead of sprintf().
3705 * linespec.c (decode_line_1): Remove trailing quote
3706 when parsing double quotes.
3710 * uw-thread.c (read_thr_debug, read_map, read_lwp, thread_iter)
3711 (libthread_stub, libthread_init): Pass NULL for the mem_attrib
3712 argument in the to_xfer_memory calls.
3716 * MAINTAINERS: Fix typo - w65 not w64. Still doesn't build.
3717 * TODO (GDB 5.1 - Cleanups): Add status of targets being obsoleted.
3721 * wince.c (child_xfer_memory): Add attrib parameter.
3722 * symm-nat.c (child_xfer_memory): Ditto.
3723 * mac-nat.c (child_xfer_memory): Ditto.
3724 * infttrace.c (child_xfer_memory): Ditto.
3725 * procfs.c (procfs_xfer_memory): Ditto.
3726 * lin-thread.c (thread_db_xfer_memory): Ditto.
3727 * gnu-nat.c (gnu_xfer_memory): Ditto.
3731 * NEWS: Mention that Harris/CXUX m88k is obsolete.
3735 * config/mips/tm-mips.h: Include "regcache.h" for macros refering
3736 to regcache functions.
3737 * config/m68k/tm-m68k.h: Ditto.
3738 * config/i386/tm-i386v.h: Ditto.
3739 * config/mcore/tm-mcore.h: Ditto.
3740 * config/m88k/tm-m88k.h: Ditto.
3741 * config/m68k/tm-news.h: Ditto.
3742 * config/m68k/tm-linux.h: Ditto.
3743 * config/m68k/tm-delta68.h: Ditto.
3744 * config/m68k/nm-sun3.h: Ditto.
3745 * config/m32r/tm-m32r.h: Ditto.
3746 * config/i386/tm-symmetry.h: Ditto.
3747 * config/i386/tm-sun386.h: Ditto.
3748 * config/i386/tm-i386.h: Ditto.
3749 * config/i386/nm-symmetry.h: Ditto.
3750 * config/i386/nm-sun386.h: Ditto.
3751 * config/i386/nm-ptx4.h: Ditto.
3752 * config/i386/nm-i386mach.h: Ditto.
3753 * config/h8500/tm-h8500.h: Ditto.
3754 * config/h8300/tm-h8300.h: Ditto.
3755 * config/fr30/tm-fr30.h: Ditto.
3756 * config/d30v/tm-d30v.h: Ditto.
3757 * config/arm/tm-arm.h: Ditto.
3758 * config/arc/tm-arc.h: Ditto.
3759 * config/alpha/tm-alpha.h: Ditto.
3760 * config/a29k/tm-vx29k.h: Ditto.
3761 * config/a29k/tm-a29k.h: Ditto.
3762 * config/w65/tm-w65.h: Ditto.
3763 * config/vax/tm-vax.h: Ditto.
3764 * config/v850/tm-v850.h: Ditto.
3765 * config/tic80/tm-tic80.h: Ditto.
3766 * config/sparc/tm-sparclite.h: Ditto.
3767 * config/sparc/tm-sparclet.h: Ditto.
3768 * config/sparc/tm-sparc.h: Ditto.
3769 * config/sparc/nm-sun4sol2.h: Ditto.
3770 * config/sparc/nm-sun4os4.h: Ditto.
3771 * config/sparc/nm-nbsd.h: Ditto.
3772 * config/powerpc/nm-solaris.h: Ditto.
3773 * config/pa/tm-hppao.h: Ditto.
3774 * config/pa/tm-hppa.h: Ditto.
3775 * config/pa/nm-hppab.h: Ditto.
3776 * config/ns32k/tm-umax.h: Ditto.
3777 * config/ns32k/tm-merlin.h: Ditto.
3778 * config/nm-m3.h: Ditto.
3779 * config/nm-gnu.h: Ditto.
3783 * MAINTAINERS: Update list of targets. Mark arm-* and v850-elf as
3784 broken. Mark sh-*, ia64-linux and ns32k-netbsd as buildable.
3785 Specify an m88k target. Include sample GAWK script to generate
3786 target list. Delete non-existant romp target.
3787 * TODO (GDB 5.1 - Cleanups): Update.
3791 * linespec.c (decode_line_1): Skip argptr over a leading
3792 double quote. Prevents alloc of 0 bytes and memcpy of -1 bytes.
3796 * config/djgpp/fnchange.lst (ia64-aix-nat.c): Add entry.
3800 * ui-out.h: Remove #if __STDC__, assume an ISO-C compiler.
3803 * printcmd.c (printf_command): Ditto.
3804 * ch-exp.c (match_integer_literal): Ditto.
3805 * scm-tags.h: Ditto.
3806 * ser-go32.c: Ditto.
3807 * hppa-tdep.c (unwind_command): Ditto.
3808 * defs.h (volatile): Delete macro definition. Assume __STDC__.
3809 * remote-adapt.c (volatile): Ditto.
3810 * remote-eb.c (volatile): Ditto.
3811 * remote-mm.c (volatile): Ditto.
3812 * defs.h (alloca): Assume __STDC__, declare returning void *.
3816 * inferior.h (ARCH_NUM_REGS): Delete definition.
3817 * stack.c (frame_info): Use NUM_REGS, not ARCH_NUM_REGS.
3818 * regcache.c (registers_changed): Ditto.
3819 (registers_fetched): Ditto.
3820 * infptrace.c (fetch_inferior_registers): Ditto.
3821 (store_inferior_registers): Ditto.
3822 * infcmd.c (do_registers_info): Ditto.
3823 (registers_info): Ditto.
3824 * i386-linux-nat.c (old_fetch_inferior_registers): Ditto.
3825 (old_store_inferior_registers): Ditto.
3826 * gdbserver/low-linux.c (register_addr): Ditto.
3827 * gdbserver/low-hppabsd.c (register_addr): Ditto.
3828 * core-aout.c: Don't include "inferior.h".
3829 (fetch_core_registers): Use NUM_REGS not ARCH_NUM_REGS.
3830 (register_addr): Ditto.
3835 * cli/cli-script.c (define_command): Fix setting of post hooks.
3839 * i386-linux-tdep.c: Fix formatting and clarify comments.
3840 (i386_linux_svr4_fetch_link_map_offsets): Use NULL instead of 0
3845 * gnu-nat.c: Include "gdb_assert.h" instead of <assert.h>.
3846 (proc_update_sc): Use gdb_assert instead of assert.
3847 (proc_abort): Ditto.
3848 (inf_set_step_thread): Ditto.
3850 (S_exception_raise_request): Ditto.
3851 (gnu_terminal_init_inferior): Ditto.
3855 * Makefile.in (solib-svr4.o): Depend on solib-svr4.c, not solib.c.
3856 (solib-legacy.o): New makefile target.
3857 * solib-legacy.c: New file.
3858 * solib-svr4.h (SVR4_FETCH_LINK_MAP_OFFSETS): Delete.
3859 (default_svr4_fetch_link_map_offsets): Delete.
3860 (set_solib_svr4_fetch_link_map_offsets): Declare.
3861 (legacy_svr4_fetch_link_map_offsets_hook): Declare.
3862 * solib-svr4.c (elf/common.h): Include.
3863 (link.h): Only include for SunOS shared library support.
3864 (_SYSCALL32): Don't define.
3865 (SVR4_FETCH_LINK_MAP_OFFSETS): Define.
3866 (default_svr4_fetch_link_map_offsets): Made static; added forward
3868 (fetch_link_map_offsets): New static global.
3869 (legacy_svr4_fetch_link_map_offsets_hook): New global variable.
3870 (default_svr4_fetch_link_map_offsets): Rewritten. The guts
3871 of what used to be in this function now reside in
3872 legacy_svr4_fetch_link_map_offsets() in solib-legacy.c.
3873 (open_symbol_file_object): Fix declaration in SunOS section
3875 (set_solib_svr4_fetch_link_map_offsets): New extern function.
3876 (init_fetch_link_map_offsets): New static function.
3877 (_initialize_svr4_solib): Put static global fetch_link_map_offsets
3878 under multiarch control.
3880 * config/alpha/alpha-linux.mt (TDEPFILES): Add solib-legacy.o to
3882 * config/alpha/fbsd.mh (NATDEPFILES): Likewise.
3883 * config/arm/linux.mt (TDEPFILES): Likewise.
3884 * config/i386/fbsd.mh (NATDEPFILES): Likewise.
3885 * config/i386/i386dgux.mh (NATDEPFILES): Likewise.
3886 * config/i386/i386gnu.mh (NATDEPFILES): Likewise.
3887 * config/i386/i386sco5.mh (NATDEPFILES): Likewise.
3888 * config/i386/i386sol2.mt (TDEPFILES): Likewise.
3889 * config/i386/i386v4.mh (NATDEPFILES): Likewise.
3890 * config/i386/i386v42mp.mh (NATDEPFILES): Likewise.
3891 * config/i386/linux.mt (TDEPFILES): Likewise.
3892 * config/i386/nbsd.mh (NATDEPFILES): Likewise.
3893 * config/i386/nbsdelf.mh (NATDEPFILES): Likewise.
3894 * config/i386/ncr3000.mt (TDEPFILES): Likewise.
3895 * config/i386/ptx4.mh (XDEPFILES): Likewise.
3896 * config/i386/sun386.mt (TDEPFILES): Likewise.
3897 * config/ia64/linux.mt (TDEPFILES): Likewise.
3898 * config/m68k/linux.mt (TDEPFILES): Likewise.
3899 * config/m68k/m68kv4.mh (NATDEPFILES): Likewise.
3900 * config/m68k/nbsd.mh (NATDEPFILES): Likewise.
3901 * config/m68k/sun2os4.mt (TDEPFILES): Likewise.
3902 * config/m68k/sun3os4.mt (TDEPFILES): Likewise.
3903 * config/m88k/delta88v4.mh (NATDEPFILES): Likewise.
3904 * config/mips/mipsv4.mh (NATDEPFILES): Likewise.
3905 * config/ns32k/nbsd.mh (NATDEPFILES): Likewise.
3906 * config/powerpc/linux.mt (TDEPFILES): Likewise.
3907 * config/powerpc/nbsd.mh (NATDEPFILES): Likewise.
3908 * config/powerpc/solaris.mh (NATDEPFILES): Likewise.
3909 * config/sh/linux.mt (TDEPFILES): Likewise.
3910 * config/sparc/linux.mt (TDEPFILES): Likewise.
3911 * config/sparc/nbsd.mh (NATDEPFILES): Likewise.
3912 * config/sparc/nbsdelf.mh (NATDEPFILES): Likewise.
3913 * config/sparc/sp64linux.mt (TDEPFILES): Likewise.
3914 * config/sparc/sun4os4.mt (TDEPFILES): Likewise.
3915 * config/sparc/sun4sol2.mh (NATDEPFILES): Likewise.
3919 * utils.c (xmrealloc, xcalloc): Return NULL for zero-sized requests.
3923 * MAINTAINERS (Write After Approval): Update Philip Blundell.
3927 * MAINTAINERS: Add myself to write after approval list.
3931 * i387-tdep.c (print_i387_status_word): Fix printing of Stack
3932 fault flag. It is bit 6 of the x87 FPU status word, not bit 7.
3936 * configure.host (m88*-harris-cxux*): Mark as obsolete.
3937 * configure.tgt: Ditto.
3938 * config/m88k/xm-cxux.h: Ditto.
3939 * config/m88k/tm-cxux.h: Ditto.
3940 * config/m88k/nm-cxux.h: Ditto.
3941 * config/m88k/cxux.mt: Ditto.
3942 * config/m88k/cxux.mh: Ditto.
3946 * Makefile.in: Delete rules for obsolete files.
3950 * stack.c (parse_frame_specification): For one argument case,
3951 handle the situation where the argument is an integer, not an
3952 address -- arguably the most common case. This matters on
3953 targets where pointers and addresses are different.
3957 * TODO: Revise 5.1 list. Delete PARAMS task. Add coding standard
3958 review. Clarify GNU/LINUX/sparc. Move other tasks to 5.2 or
3963 * TODO (GDB 5.1 Known Problems): Document problem of building GDB
3964 with SID on Solaris 8.
3968 * defs.h: Provide prototypes for floatformat_is_negative,
3969 floatformat_is_nan and floatformat_mantissa.
3970 * utils.c: Include "gdb_assert.h".
3971 (floatformat_is_negative): New function.
3972 (floatformat_is_nan): New function.
3973 (floatformat_mantissa): New function.
3974 * valprint.c: Include "floatformat.h".
3975 (print_floating): Get rid of the Linux-specific
3976 TARGET_ANALYZE_FLOATING macro and rewrite NaN detection with the
3977 help these new functions. Print NaN's in a format conforming to
3982 * top.c (init_main): Make `set history file name' complete on file
3987 * Makefile.in (LINTFLAGS): Update to contain all of the macros
3988 which define include paths used when compiling.
3990 * util.c (savestring, msavestring): Change type of length argument.
3991 * defs.h (savestring, msavestring): Update to match.
3993 * symtab.h (decode_line_1): Removed declaration.
3995 * symfile.c (#include <assert.h>): Removed.
3997 * arch-utils.c (#include <ctype.h>): Removed.
3998 * c-typeprint.c: Likewise.
3999 * dbxread.c: Likewise.
4000 * gdbtypes.c: Likewise.
4001 * target.c: Likewise.
4002 * os9kread.c: Likewise.
4004 * c-valprint.c (#include "demangle.h"): Removed.
4005 * ch-typeprint.c: Likewise.
4007 * f-typeprint.c: Likewise.
4008 * f-valprint.c: Likewise.
4009 * m2-typeprint.c: Likewise.
4010 * typeprint.c: Likewise.
4011 * p-typeprint.c: Likewise.
4012 * valarith.c: Likewise.
4013 * valprint.c: Likewise.
4015 * m2-typeprint.c (#include "gdb_string.h"): Removed.
4016 * nlmread.c: Likewise.
4018 * mdebugread.c (#include "gdb-stabs.h"): Removed.
4019 * minsyms.c: Likewise.
4020 * mipsread.c: Likewise.
4021 * nlmread.c: Likewise.
4023 * m2-typeprint.c (#include "obstack.h"): Removed.
4024 * m2-valprint.c: Likewise.
4026 * event-loop.c (#include <setjmp.h>): Removed.
4030 * MAINTAINERS: Remove self from specific maintenance domains
4031 (macos, gdbserver, documentation, testsuite).
4035 * 29k-share/udi/udip2soc.c, Makefile.in, a29k-tdep.c,
4036 a68v-nat.c, abug-rom.c, aclocal.m4, alpha-nat.c, alpha-tdep.c,
4037 annotate.c, annotate.h, arc-tdep.c, arch-utils.c,
4038 arch-utils.h, arm-tdep.c, ax-gdb.c, ax-gdb.h, ax-general.c,
4039 ax.h, bcache.c, bcache.h, blockframe.c, breakpoint.c,
4040 breakpoint.h, buildsym.c, buildsym.h, c-exp.y, c-lang.c,
4041 c-lang.h, c-typeprint.c, c-valprint.c, call-cmds.h, ch-exp.c,
4042 ch-lang.c, ch-lang.h, ch-typeprint.c, ch-valprint.c,
4043 cli/cli-cmds.h, cli/cli-decode.c, cli/cli-decode.h,
4044 cli/cli-script.c, cli/cli-script.h, cli/cli-setshow.h,
4045 cli/cli-utils.h, cli-out.c, cli-out.h, coff-solib.c,
4046 coff-solib.h, coffread.c, command.h, complaints.c,
4047 complaints.h, completer.c, completer.h,
4048 config/a29k/nm-ultra3.h, config/a29k/tm-a29k.h,
4049 config/a29k/tm-ultra3.h, config/a29k/tm-vx29k.h,
4050 config/a29k/xm-ultra3.h, config/alpha/nm-fbsd.h,
4051 config/alpha/nm-linux.h, config/alpha/nm-osf.h,
4052 config/alpha/nm-osf2.h, config/alpha/nm-osf3.h,
4053 config/alpha/tm-alpha.h, config/alpha/tm-alphalinux.h,
4054 config/alpha/xm-alphalinux.h, config/alpha/xm-alphaosf.h,
4055 config/alpha/xm-fbsd.h, config/arc/tm-arc.h,
4056 config/arm/nm-linux.h, config/arm/tm-arm.h,
4057 config/arm/tm-embed.h, config/d10v/tm-d10v.h,
4058 config/d30v/tm-d30v.h, config/fr30/tm-fr30.h,
4059 config/h8300/tm-h8300.h, config/h8500/tm-h8500.h,
4060 config/i386/nm-fbsd.h, config/i386/nm-gnu.h,
4061 config/i386/nm-i386bsd.h, config/i386/nm-i386mach.h,
4062 config/i386/nm-i386sco.h, config/i386/nm-i386sol2.h,
4063 config/i386/nm-i386v.h, config/i386/nm-i386v4.h,
4064 config/i386/nm-i386v42mp.h, config/i386/nm-linux.h,
4065 config/i386/nm-nbsd.h, config/i386/nm-nbsdelf.h,
4066 config/i386/nm-ptx4.h, config/i386/nm-sun386.h,
4067 config/i386/nm-symmetry.h, config/i386/tm-cygwin.h,
4068 config/i386/tm-fbsd.h, config/i386/tm-i386.h,
4069 config/i386/tm-i386aix.h, config/i386/tm-i386bsd.h,
4070 config/i386/tm-i386gnu.h, config/i386/tm-i386lynx.h,
4071 config/i386/tm-i386m3.h, config/i386/tm-i386mk.h,
4072 config/i386/tm-i386nw.h, config/i386/tm-i386os9k.h,
4073 config/i386/tm-i386sco5.h, config/i386/tm-i386sol2.h,
4074 config/i386/tm-i386v.h, config/i386/tm-i386v4.h,
4075 config/i386/tm-i386v42mp.h, config/i386/tm-linux.h,
4076 config/i386/tm-nbsd.h, config/i386/tm-ptx.h,
4077 config/i386/tm-ptx4.h, config/i386/tm-sun386.h,
4078 config/i386/tm-symmetry.h, config/i386/tm-vxworks.h,
4079 config/i386/xm-fbsd.h, config/i386/xm-i386bsd.h,
4080 config/i386/xm-i386gnu.h, config/i386/xm-i386m3.h,
4081 config/i386/xm-i386mach.h, config/i386/xm-i386mk.h,
4082 config/i386/xm-i386sco.h, config/i386/xm-i386v4.h,
4083 config/i386/xm-linux.h, config/i386/xm-nbsd.h,
4084 config/i386/xm-ptx.h, config/i386/xm-ptx4.h,
4085 config/i386/xm-sun386.h, config/i386/xm-symmetry.h,
4086 config/i960/tm-i960.h, config/i960/tm-mon960.h,
4087 config/i960/tm-nindy960.h, config/i960/tm-vx960.h,
4088 config/ia64/nm-aix.h, config/ia64/nm-linux.h,
4089 config/ia64/tm-aix.h, config/ia64/tm-ia64.h,
4090 config/ia64/tm-linux.h, config/ia64/xm-aix.h,
4091 config/ia64/xm-linux.h, config/m68k/nm-apollo68b.h,
4092 config/m68k/nm-delta68.h, config/m68k/nm-dpx2.h,
4093 config/m68k/nm-hp300bsd.h, config/m68k/nm-hp300hpux.h,
4094 config/m68k/nm-linux.h, config/m68k/nm-sun3.h,
4095 config/m68k/tm-apollo68b.h, config/m68k/tm-cisco.h,
4096 config/m68k/tm-dpx2.h, config/m68k/tm-es1800.h,
4097 config/m68k/tm-hp300bsd.h, config/m68k/tm-hp300hpux.h,
4098 config/m68k/tm-isi.h, config/m68k/tm-linux.h,
4099 config/m68k/tm-m68k.h, config/m68k/tm-m68kv4.h,
4100 config/m68k/tm-mac.h, config/m68k/tm-monitor.h,
4101 config/m68k/tm-nbsd.h, config/m68k/tm-news.h,
4102 config/m68k/tm-os68k.h, config/m68k/tm-sun3.h,
4103 config/m68k/tm-vx68.h, config/m68k/xm-3b1.h,
4104 config/m68k/xm-apollo68b.h, config/m68k/xm-dpx2.h,
4105 config/m68k/xm-hp300bsd.h, config/m68k/xm-hp300hpux.h,
4106 config/m68k/xm-linux.h, config/m68k/xm-m68kv4.h,
4107 config/m68k/xm-mpw.h, config/m68k/xm-news.h,
4108 config/m68k/xm-sun2.h, config/m68k/xm-sun3.h,
4109 config/m68k/xm-sun3os4.h, config/m88k/nm-delta88v4.h,
4110 config/m88k/tm-delta88.h, config/m88k/tm-delta88v4.h,
4111 config/m88k/tm-m88k.h, config/m88k/xm-cxux.h,
4112 config/m88k/xm-delta88.h, config/m88k/xm-delta88v4.h,
4113 config/m88k/xm-dgux.h, config/mcore/tm-mcore.h,
4114 config/mips/nm-irix3.h, config/mips/nm-irix4.h,
4115 config/mips/nm-irix5.h, config/mips/nm-mips.h,
4116 config/mips/nm-news-mips.h, config/mips/tm-bigmips.h,
4117 config/mips/tm-embed.h, config/mips/tm-embed64.h,
4118 config/mips/tm-embedl.h, config/mips/tm-embedl64.h,
4119 config/mips/tm-irix3.h, config/mips/tm-irix5.h,
4120 config/mips/tm-mips.h, config/mips/tm-mips64.h,
4121 config/mips/tm-mipsm3.h, config/mips/tm-mipsv4.h,
4122 config/mips/tm-tx39.h, config/mips/tm-tx39l.h,
4123 config/mips/tm-vr4100.h, config/mips/tm-vr4300.h,
4124 config/mips/tm-vr4300el.h, config/mips/tm-vr4xxx.h,
4125 config/mips/tm-vr4xxxel.h, config/mips/tm-vr5000.h,
4126 config/mips/tm-vr5000el.h, config/mips/xm-irix3.h,
4127 config/mips/xm-irix4.h, config/mips/xm-irix5.h,
4128 config/mips/xm-mips.h, config/mips/xm-mipsm3.h,
4129 config/mips/xm-mipsv4.h, config/mips/xm-news-mips.h,
4130 config/mips/xm-riscos.h, config/mn10200/tm-mn10200.h,
4131 config/mn10300/tm-mn10300.h, config/nm-gnu.h,
4132 config/nm-linux.h, config/nm-lynx.h, config/nm-m3.h,
4133 config/nm-sysv4.h, config/none/nm-none.h,
4134 config/none/tm-none.h, config/none/xm-none.h,
4135 config/ns32k/nm-nbsd.h, config/ns32k/nm-umax.h,
4136 config/ns32k/tm-merlin.h, config/ns32k/tm-nbsd.h,
4137 config/ns32k/tm-ns32km3.h, config/ns32k/tm-umax.h,
4138 config/ns32k/xm-merlin.h, config/ns32k/xm-ns32km3.h,
4139 config/pa/nm-hppab.h, config/pa/nm-hppah.h,
4140 config/pa/nm-hppao.h, config/pa/tm-hppa.h,
4141 config/pa/tm-hppa64.h, config/pa/tm-hppah.h,
4142 config/pa/xm-hppab.h, config/pa/xm-hppah.h,
4143 config/powerpc/nm-aix.h, config/powerpc/nm-linux.h,
4144 config/powerpc/nm-macos.h, config/powerpc/nm-nbsd.h,
4145 config/powerpc/tm-cygwin.h, config/powerpc/tm-linux.h,
4146 config/powerpc/tm-macos.h, config/powerpc/tm-ppc-aix.h,
4147 config/powerpc/tm-ppc-eabi.h, config/powerpc/tm-ppc-nw.h,
4148 config/powerpc/tm-ppcle-eabi.h, config/powerpc/tm-solaris.h,
4149 config/powerpc/xm-aix.h, config/powerpc/xm-linux.h,
4150 config/powerpc/xm-mpw.h, config/rs6000/nm-rs6000.h,
4151 config/rs6000/tm-rs6000.h, config/rs6000/tm-rs6000ly.h,
4152 config/rs6000/xm-aix4.h, config/rs6000/xm-rs6000.h,
4153 config/sh/tm-linux.h, config/sh/tm-sh.h, config/sh/tm-wince.h,
4154 config/sparc/nm-linux.h, config/sparc/nm-nbsd.h,
4155 config/sparc/nm-nbsdelf.h, config/sparc/nm-sparclynx.h,
4156 config/sparc/nm-sun4os4.h, config/sparc/nm-sun4sol2.h,
4157 config/sparc/tm-linux.h, config/sparc/tm-sp64.h,
4158 config/sparc/tm-sp64sim.h, config/sparc/tm-sparc.h,
4159 config/sparc/tm-sparclet.h, config/sparc/tm-sparclite.h,
4160 config/sparc/tm-sparclynx.h, config/sparc/tm-spc-em.h,
4161 config/sparc/tm-sun4os4.h, config/sparc/tm-sun4sol2.h,
4162 config/sparc/xm-sun4os4.h, config/sparc/xm-sun4sol2.h,
4163 config/tic80/tm-tic80.h, config/tm-linux.h, config/tm-lynx.h,
4164 config/tm-sysv4.h, config/v850/tm-v850.h, config/vax/tm-vax.h,
4165 config/w65/tm-w65.h, config/xm-aix4.h, config/xm-lynx.h,
4166 config/xm-mpw.h, config/xm-nbsd.h, config/xm-sysv4.h,
4167 config/z8k/tm-z8k.h, configure.in, core-aout.c, core-regset.c,
4168 core-sol2.c, corefile.c, corelow.c, cp-valprint.c,
4169 cpu32bug-rom.c, cxux-nat.c, d10v-tdep.c, d30v-tdep.c,
4170 dbug-rom.c, dbxread.c, dcache.c, dcache.h, defs.h,
4171 delta68-nat.c, demangle.c, dink32-rom.c, dpx2-nat.c, dsrec.c,
4172 dstread.c, dve3900-rom.c, dwarf2read.c, dwarfread.c,
4173 elfread.c, environ.c, environ.h, eval.c, event-loop.c,
4174 event-loop.h, event-top.c, exec.c, expprint.c, f-exp.y,
4175 f-lang.c, f-lang.h, f-typeprint.c, f-valprint.c, findvar.c,
4176 fork-child.c, fr30-tdep.c, frame.c, frame.h, gdb-events.c,
4177 gdb-events.h, gdb-events.sh, gdb-stabs.h, gdb.1, gdb_string.h,
4178 gdb_thread_db.h, gdbcmd.h, gdbcore.h, gdbserver/Makefile.in,
4179 gdbserver/gdbreplay.c, gdbserver/gdbserver.1,
4180 gdbserver/low-hppabsd.c, gdbserver/low-linux.c,
4181 gdbserver/low-lynx.c, gdbserver/low-nbsd.c,
4182 gdbserver/low-sim.c, gdbserver/low-sparc.c,
4183 gdbserver/low-sun3.c, gdbserver/remote-utils.c,
4184 gdbserver/server.c, gdbserver/server.h, gdbserver/utils.c,
4185 gdbthread.h, gdbtypes.c, gdbtypes.h, gnu-nat.c, gnu-nat.h,
4186 gnu-regex.c, gnu-regex.h, h8300-tdep.c, h8500-tdep.c,
4187 hp-psymtab-read.c, hp-symtab-read.c, hp300ux-nat.c,
4188 hppa-tdep.c, hppab-nat.c, hppah-nat.c, hppam3-nat.c, hpread.c,
4189 hpread.h, hpux-thread.c, i386-tdep.c, i386aix-nat.c,
4190 i386b-nat.c, i386gnu-nat.c, i386ly-tdep.c, i386m3-nat.c,
4191 i386mach-nat.c, i386nbsd-nat.c, i386nbsd-tdep.c, i386v-nat.c,
4192 i386v4-nat.c, i387-tdep.c, i960-tdep.c, infcmd.c, inferior.h,
4193 inflow.c, infptrace.c, infrun.c, inftarg.c, infttrace.c,
4194 irix4-nat.c, irix5-nat.c, isi-xdep.c, jv-exp.y, jv-lang.c,
4195 jv-lang.h, jv-typeprint.c, jv-valprint.c, kdb-start.c,
4196 kod-cisco.c, kod.c, language.c, language.h, lin-thread.c,
4197 linespec.c, linespec.h, linux-thread.c, lynx-nat.c, m2-exp.y,
4198 m2-lang.c, m2-lang.h, m2-typeprint.c, m2-valprint.c, m3-nat.c,
4199 m32r-rom.c, m32r-tdep.c, m68k-tdep.c, m68klinux-nat.c,
4200 m68knbsd-nat.c, m88k-nat.c, m88k-tdep.c, mac-nat.c,
4201 mac-xdep.c, main.c, maint.c, mcore-rom.c, mcore-tdep.c,
4202 mdebugread.c, mem-break.c, minimon.h, minsyms.c, mips-nat.c,
4203 mips-tdep.c, mipsm3-nat.c, mipsread.c, mipsv4-nat.c,
4204 mn10200-tdep.c, mn10300-tdep.c, mon960-rom.c, monitor.c,
4205 monitor.h, news-xdep.c, nindy-share/env.h, nindy-tdep.c,
4206 nlm/Makefile.in, nlmread.c, ns32k-tdep.c, ns32km3-nat.c,
4207 ns32knbsd-nat.c, objfiles.c, objfiles.h, ocd.c, ocd.h,
4208 op50-rom.c, os9kread.c, osfsolib.c, p-exp.y, pa64solib.c,
4209 pa64solib.h, parse.c, parser-defs.h, partial-stab.h,
4210 ppc-bdm.c, ppc-linux-nat.c, ppc-linux-tdep.c, ppcbug-rom.c,
4211 ppcnbsd-nat.c, printcmd.c, proc-api.c, proc-events.c,
4212 proc-flags.c, proc-utils.h, proc-why.c, procfs.c, ptx4-nat.c,
4213 rdi-share/Makefile.in, rdi-share/aclocal.m4, regcache.c,
4214 regcache.h, remote-adapt.c, remote-array.c, remote-bug.c,
4215 remote-e7000.c, remote-eb.c, remote-es.c, remote-est.c,
4216 remote-hms.c, remote-mips.c, remote-mm.c, remote-nindy.c,
4217 remote-nrom.c, remote-os9k.c, remote-rdi.c, remote-rdp.c,
4218 remote-sds.c, remote-sim.c, remote-st.c, remote-udi.c,
4219 remote-utils.c, remote-utils.h, remote-vx.c, remote.c,
4220 remote.h, reply_mig_hack.awk, rom68k-rom.c, rs6000-nat.c,
4221 rs6000-tdep.c, scm-exp.c, scm-lang.c, scm-lang.h, scm-tags.h,
4222 scm-valprint.c, ser-e7kpc.c, ser-mac.c, ser-ocd.c, ser-pipe.c,
4223 ser-tcp.c, ser-unix.c, serial.c, serial.h, sh-tdep.c,
4224 sh3-rom.c, sol-thread.c, solib-aix5.c, solib-svr4.c, solib.c,
4225 solib.h, solist.h, somread.c, somsolib.c, somsolib.h,
4226 source.c, sparc-nat.c, sparc-tdep.c, sparcl-tdep.c,
4227 sparclet-rom.c, srec.h, stabsread.c, stabsread.h, stack.c,
4228 standalone.c, stop-gdb.c, stuff.c, sun3-nat.c, sun386-nat.c,
4229 symfile.c, symfile.h, symm-nat.c, symm-tdep.c, symmisc.c,
4230 symtab.c, symtab.h, target.c, target.h, terminal.h, thread.c,
4231 tic80-tdep.c, top.c, top.h, tracepoint.c, tracepoint.h,
4232 typeprint.c, ui-file.c, ui-file.h, ui-out.h, ultra3-nat.c,
4233 ultra3-xdep.c, umax-xdep.c, utils.c, v850-tdep.c, v850ice.c,
4234 valarith.c, valops.c, valprint.c, value.h, values.c, varobj.h,
4235 vax-tdep.c, version.h, vx-share/vxWorks.h, vx-share/xdr_ld.c,
4236 vx-share/xdr_ptrace.c, vx-share/xdr_ptrace.h,
4237 vx-share/xdr_rdb.c, w65-tdep.c, w89k-rom.c, win32-nat.c,
4238 wrapper.c, wrapper.h, xcoffread.c, xcoffsolib.c, xcoffsolib.h,
4239 xmodem.c, xmodem.h, z8k-tdep.c: Update/correct copyright
4244 * acconfig.h (HAVE_PRSYSENT_T, HAVE_PR_SIGSET_T,
4245 HAVE_PR_SIGACTION64_T, HAVE_PR_SIGINFO64_T): New configure
4247 * configure.in (prsysent_t, pr_sigset_t, pr_sigaction64_t,
4248 pr_siginfo64_t): Test for these typedefs in <sys/procfs.h>.
4249 (sys/fault.h, sys/select.h): Test for presence of these
4251 (ia64-*-aix*): Define NEW_PROC_API for this host.
4252 * configure: Regenerate.
4253 * config.in: Regenerate.
4255 * configure.host (ia64-*-aix*): New host.
4256 * configure.tgt (ia64-*-aix*): New target.
4260 * TODO (GDB 5.1 Known Problems): Document z8k as broken.
4264 * wince.c: Change realloc to xrealloc throughout.
4265 (handle_load_dll): Use void * rather than PTR in argument.
4269 * ocd.h (ocd_xfer_memory): Add ``attrib'' parameter.
4270 * ocd.c (ocd_xfer_memory): Ditto.
4271 * ser-ocd.c (ocd_setstopbits): New function. Add to ocd_ops.
4272 * MAINTAINERS: Document powerpc-eabi and powerpcle-eabi as
4273 buildable with ,-Werror.
4275 * Makefile.in (symfile_h): Define.
4276 (mcore-tdep.o): Add $(symfile_h), $(gdbcore_h) and $(inferior_h).
4277 * mcore-tdep.c: Include "symfile.h", "gdbcore.h" and "inferior.h".
4278 * MAINTAINERS: Document mcore-elf and mcore-pe as buildable with
4281 * dsrec.c (make_srec): Fix internal_error fmt arg.
4282 * MAINTAINERS: Document i960-coff as buildable with ,-Werror.
4286 * solib-aix5.c (aix5_relocate_main_executable): Don't use ANOFFSET
4291 * MAINTAINERS (paper trail): Update.
4293 * CONTRIBUTE: Update note on ``Fix PR gdb/4706'' convention.
4298 * mn10200-tdep.c (mn10200_frame_chain): Pass 0 for ``pc''
4299 parameter to mn10200_analyze_prologue.
4301 * config/mn10200/tm-mn10200.h: Include "regcache.h".
4302 * MAINTAINERS: Document that mn10200-elf target is buildable.
4306 * config/ia64/xm-aix.h (GDB_GREGSET_T, GDB_FPREGSET_T): Move defines
4308 * config/ia64/nm-aix.h (GDB_GREGSET_T, GDB_FPREGSET_T): ...to here.
4309 (MONTEREY): Don't define.
4314 * config/mn10300/tm-mn10300.h (E0_REGNUM): Correct to 15.
4318 * sparc-nat.c (sparc-nat.c): Don't include self.
4322 * defs.h (__CYGWIN__): Moved conditional which defines __CYGWIN__
4323 if __CYGWIN32__ is set from here.
4324 * config/i386/xm-cygwin.h: To here.
4325 * config/powerpc/xm-cygwin.h: To here.
4327 * i386-stub.c (handle_exception): Use 'T' response packet.
4331 * m32r-tdep.c: Fix cut and paste error in comment.
4335 * symtab.c (print_msymbol_info): Print addresses by portable method
4336 longest_local_hex_string_custom. Allow for 64-bit addresses.
4340 * gdbtypes.h (builtin_type_f_integer): Removed duplicate declaration.
4341 (MAX_OF_TYPE): Wrap macro definition in parenthesis.
4342 (MIN_OF_TYPE): Likewise.
4344 * memattr.h (mem_access_mode): Removed extraneous trailing comma.
4348 * Makefile.in (os9kread.o): Do not compile with WERROR_CFLAGS.
4349 * os9kread.c (os9k_process_one_symbol): Add assert to detect
4350 ``loses if sizeof (char *) > sizeof (int)''.
4354 * gdb_assert.h: Document pragmatics behind gdb_assert's case.
4358 * Makefile.in (gdbtk-cmds.o): Add $(regcache_h) to dependency
4364 * Makefile.in (regcache_h): Define. Add $(regcache_h) to
4369 * printcmd.c (print_address_numeric): Update comments to refer
4370 to sizeof addr, not sizeof pointer.
4371 (x_command): Remove needless whitespace (shorten long line).
4373 * breakpoint.c (print_one_breakpoint): Formatting clean-up.
4374 (read_memory_nobpt): Ditto.
4375 (ep_is_catchpoint): Ditto.
4376 (ep_is_shlib_catchpoint): Ditto.
4377 (ep_is_exception_catchpoint): Ditto.
4378 (describe_other_breakpoints): Ditto.
4382 * regcache.h (register_valid): Fix comment documenting valid
4387 From Steven Johnson:
4388 * regcache.h: New file.
4390 * value.h (read_register_bytes, read_register_gen)
4391 (write_register_gen, write_register_bytes)
4392 (read_register, read_register_pid)
4393 (read_signed_register, read_signed_register_pid)
4394 (write_register, write_register_pid)
4395 (register_cached, set_register_cached)
4396 (register_changed, register_buffer)
4397 (registers_changed, supply_register): Move declaration from here.
4398 * regcache.h: To here.
4399 * gdbcore.h (registers_fetched): Ditto.
4400 * inferior.h (registers, registers_valid): Ditto.
4402 * regcache.c (generic_target_read_pc, read_pc_pid, read_pc,
4403 generic_target_write_pc, write_pc_pid, write_pc,
4404 generic_target_read_sp, read_sp, generic_target_write_sp,
4405 write_sp, generic_target_read_fp, read_fp,
4406 generic_target_write_fp, write_fp): Add note that these functions
4407 will be moved from this file.
4409 * a29k-tdep.c: Include "regcache.h".
4410 * a68v-nat.c: Ditto.
4411 * abug-rom.c: Ditto.
4412 * alpha-nat.c: Ditto.
4413 * alpha-tdep.c: Ditto.
4414 * alphabsd-nat.c: Ditto.
4415 * arc-tdep.c: Ditto.
4416 * arm-linux-nat.c: Ditto.
4417 * arm-linux-tdep.c: Ditto.
4418 * arm-tdep.c: Ditto.
4419 * blockframe.c: Ditto.
4420 * core-aout.c: Ditto.
4421 * core-sol2.c: Ditto.
4423 * cpu32bug-rom.c: Ditto.
4424 * cxux-nat.c: Ditto.
4425 * d10v-tdep.c: Ditto.
4426 * d30v-tdep.c: Ditto.
4427 * dbug-rom.c: Ditto.
4428 * dink32-rom.c: Ditto.
4429 * dve3900-rom.c: Ditto.
4431 * fr30-tdep.c: Ditto.
4433 * go32-nat.c: Ditto.
4434 * h8300-tdep.c: Ditto.
4435 * h8500-tdep.c: Ditto.
4436 * hp300ux-nat.c: Ditto.
4437 * hppa-tdep.c: Ditto.
4438 * hppab-nat.c: Ditto.
4439 * hppah-nat.c: Ditto.
4440 * hppam3-nat.c: Ditto.
4441 * hpux-thread.c: Ditto.
4442 * i386-linux-nat.c: Ditto.
4443 * i386-linux-tdep.c: Ditto.
4444 * i386-tdep.c: Ditto.
4445 * i386aix-nat.c: Ditto.
4446 * i386b-nat.c: Ditto.
4447 * i386bsd-nat.c: Ditto.
4448 * i386gnu-nat.c: Ditto.
4449 * i386ly-tdep.c: Ditto.
4450 * i386m3-nat.c: Ditto.
4451 * i386mach-nat.c: Ditto.
4452 * i386nbsd-nat.c: Ditto.
4453 * i386v4-nat.c: Ditto.
4454 * i387-nat.c: Ditto.
4455 * i387-tdep.c: Ditto.
4456 * i960-tdep.c: Ditto.
4457 * ia64-aix-nat.c: Ditto.
4458 * ia64-linux-nat.c: Ditto.
4459 * ia64-tdep.c: Ditto.
4460 * infptrace.c: Ditto.
4462 * irix4-nat.c: Ditto.
4463 * irix5-nat.c: Ditto.
4465 * lin-thread.c: Ditto.
4466 * lynx-nat.c: Ditto.
4468 * m32r-rom.c: Ditto.
4469 * m32r-tdep.c: Ditto.
4470 * m68hc11-tdep.c: Ditto.
4471 * m68k-tdep.c: Ditto.
4472 * m68klinux-nat.c: Ditto.
4473 * m68knbsd-nat.c: Ditto.
4474 * m68knbsd-tdep.c: Ditto.
4475 * m88k-nat.c: Ditto.
4476 * m88k-tdep.c: Ditto.
4478 * mcore-rom.c: Ditto.
4479 * mcore-tdep.c: Ditto.
4480 * mi/mi-main.c: Ditto.
4481 * mips-nat.c: Ditto.
4482 * mips-tdep.c: Ditto.
4483 * mipsm3-nat.c: Ditto.
4484 * mipsv4-nat.c: Ditto.
4485 * mn10200-tdep.c: Ditto.
4486 * mn10300-tdep.c: Ditto.
4488 * ns32km3-nat.c: Ditto.
4489 * ns32knbsd-nat.c: Ditto.
4491 * pa64solib.c: Ditto.
4493 * ppc-linux-nat.c: Ditto.
4494 * ppc-linux-tdep.c: Ditto.
4495 * ppcbug-rom.c: Ditto.
4496 * ppcnbsd-nat.c: Ditto.
4497 * ptx4-nat.c: Ditto.
4498 * regcache.c: Ditto.
4499 * remote-adapt.c: Ditto.
4500 * remote-array.c: Ditto.
4501 * remote-bug.c: Ditto.
4502 * remote-e7000.c: Ditto.
4503 * remote-eb.c: Ditto.
4504 * remote-es.c: Ditto.
4505 * remote-est.c: Ditto.
4506 * remote-hms.c: Ditto.
4507 * remote-mips.c: Ditto.
4508 * remote-mm.c: Ditto.
4509 * remote-nindy.c: Ditto.
4510 * remote-os9k.c: Ditto.
4511 * remote-rdi.c: Ditto.
4512 * remote-rdp.c: Ditto.
4513 * remote-sds.c: Ditto.
4514 * remote-sim.c: Ditto.
4515 * remote-st.c: Ditto.
4516 * remote-udi.c: Ditto.
4517 * remote-utils.c: Ditto.
4518 * remote-vx.c: Ditto.
4519 * remote-vx29k.c: Ditto.
4520 * remote-vx68.c: Ditto.
4521 * remote-vx960.c: Ditto.
4522 * remote-vxmips.c: Ditto.
4523 * remote-vxsparc.c: Ditto.
4525 * rom68k-rom.c: Ditto.
4526 * rs6000-nat.c: Ditto.
4527 * rs6000-tdep.c: Ditto.
4530 * sol-thread.c: Ditto.
4531 * solib-svr4.c: Ditto.
4532 * somsolib.c: Ditto.
4533 * sparc-nat.c: Ditto.
4534 * sparc-tdep.c: Ditto.
4535 * sparcl-tdep.c: Ditto.
4536 * sparclet-rom.c: Ditto.
4537 * sun3-nat.c: Ditto.
4538 * sun386-nat.c: Ditto.
4539 * symm-nat.c: Ditto.
4541 * thread-db.c: Ditto.
4543 * tic80-tdep.c: Ditto.
4544 * tracepoint.c: Ditto.
4545 * ultra3-nat.c: Ditto.
4546 * umax-xdep.c: Ditto.
4547 * uw-thread.c: Ditto.
4548 * v850-tdep.c: Ditto.
4551 * w65-tdep.c: Ditto.
4552 * w89k-rom.c: Ditto.
4553 * win32-nat.c: Ditto.
4555 * z8k-tdep.c: Ditto.
4559 * MAINTAINERS: Add Matt Hiller to Write After Approval list.
4563 * mn10300-tdep.c (mn10300_stab_reg_to_regnum): New function.
4564 (mn10300_gdbarch_init): Set appropriate elements of gdbarch to
4565 mn10300_stab_reg_to_regnum.
4569 * symtab.c (search_symbols): Fix off by one error in test for
4574 * config/sparc/sp64linux.mt: New file.
4575 * configure.tgt: Recognize sparc64-*-linux* as a sp64linux target.
4576 * configure.host: Recognize sparc64-*-linux* as a linux host.
4579 * config/sparc/tm-sp64linux.h: New file.
4583 * buildsym.c (push_subfile, pop_subfile): Replace call to abort()
4584 with call to internal_error().
4585 * dbxread.c (process_one_symbol): Likewise.
4586 * exec.c (build_section_table, xfer_memory): Likewise.
4587 * h8500-tdep.c (h8500_register_size, h8500_register_virtual_type):
4589 * hpread.c (hpread_type_translate, hpread_read_array_type)
4590 (hpread_type_lookup): Likewise.
4591 * i386-tdep.c (gdb_print_insn_i386): Likewise.
4592 * i960-tdep.c (mem): Likewise
4593 * inflow.c (set_sigio_trap, clear_sigio_trap): Likewise.
4594 * infptrace.c (child_resume): Likewise.
4595 * infttrace.c (_initialize_infttrace): Likewise.
4596 * language.c (binop_result_type, add_language): Likewise.
4597 * lynx-nat.c (store_inferior_registers): Likewise.
4598 * m3-nat.c (port_chain_insert, m3_trace_me): Likewise.
4599 * mdebugread.c (parse_partial_symbols): Likewise.
4600 * monitor.c (monitor_printf_noecho, monitor_printf)
4601 (monitor_dump_regs): Likewise.
4602 * ocd.c (stu_put_packet): Likewise.
4603 * printcmd.c (decode_format, print_scalar_formatted): Likewise.
4604 * remote-bug.c (bug_open): Likewise.
4605 * remote-e7000.c (fetch_regs_from_dump, e7000_wait): Likewise.
4606 * remote-es.c (es1800_read_bytes): Likewise.
4607 * remote-mips.c (common_breakpoint): Likewise.
4608 * remote-rdp.c (send_rdp): Likewise.
4609 * remote-sds.c (putmessage): Likewise.
4610 * sparc-nat.c (fetch_inferior_registers, store_inferior_registers):
4612 * sparcl-tdep.c (sparclite_download): Likewise.
4613 * symtab.c (lookup_partial_symbol): Likewise.
4614 * target.c (push_target, pop_target, initialize_targets): Likewise.
4615 * utils.c (internal_verror, malloc_botch, wrap_here, decimal2str):
4617 * valprint.c (print_decimal, print_longest, print_longest)
4618 (strcat_longest): Likewise.
4619 * w65-tdep.c (init_frame_pc, w65_push_dummy_frame): Likewise.
4620 * xmodem.c (xmodem_send_packet): Likewise.
4621 * z8k-tdep.c (init_frame_pc, z8k_push_dummy_frame): Likewise.
4622 * config/h8500/tm-h8500.h (STORE_STRUCT_RETURN): Likewise.
4623 * config/mn10200/tm-mn10200.h (EXTRACT_RETURN_VALUE)
4624 (STORE_RETURN_VALUE): Likewise.
4625 * config/ns32k/nm-umax.h (REGISTER_U_ADDR): Likewise.
4626 * config/ns32k/xm-merlin.h (REGISTER_U_ADDR): Likewise.
4627 * config/z8k/tm-z8k.h (STORE_STRUCT_RETURN, STORE_RETURN_VALUE):
4632 * CONTRIBUTE: Document how to cite a problem report.
4633 * TODO: Note need to replace CONTRIBUTE with generated file.
4635 * CONTRIBUTE: Mention that patches do not need to include the
4636 generated files gdbarch.h and gdbarch.c.
4640 * value.h (get_saved_register): Move from here.
4645 * solib.h (in_svr4_dynsym_resolve_code): Delete declaration.
4646 (in_solib_dynsym_resolve_code): Add declaration.
4647 (IN_SOLIB_DYNSYM_RESOLVE_CODE): Changed define to invoke
4648 in_solib_dynsym_resolve_code() rather than
4649 in_svr4_dynsym_resolve_code(). Also, removed the ifdefs
4650 which caused this macro to only be defined when
4651 SVR4_SHARED_LIBS is defined.
4652 * solib.c (in_solib_dynsym_resolve_code): New function.
4653 * solist.h (struct target_so_ops): Add new member
4654 in_dynsym_resolve_code.
4655 * solib-aix5.c (aix5_in_dynsym_resolve_code): Renamed from
4656 in_svr4_dynsym_resolve_code. Also, made static.
4657 (_initialize_aix5_solib): Initialize in_dynsym_resolve_code
4658 member in aix5_so_ops.
4659 * solib-svr4.c (svr4_in_dynsym_resolve_code): Renamed from
4660 in_svr4_dynsym_resolve_code. Also, added second version
4661 of this function which will be used when SVR4_SHARED_LIBS
4663 (_initialize_svr4_solib): Initialize in_dynsym_resolve_code
4664 member in svr4_so_ops.
4666 * ia64-aix-nat.c, ia64-aix-tdep.c, config/ia64/aix.mh,
4667 config/ia64/aix.mt, config/ia64/nm-aix.h, config/ia64/tm-aix.h,
4668 config/ia64/xm-aix.h: New files.
4669 * ia64-tdep.c (_initialize_ia64_tdep): Remove declaration.
4670 (ia64_aix_sigcontext_register_address): New declaration.
4671 (ia64_gdbarch_init): Provide for initialization of
4672 sigcontext_register_address member of struct tdep when
4673 on target is detected to be running AIX.
4674 * config/ia64/linux.mt (TDEPFILES): Add ia64-aix-tdep.o to
4679 * ia64-tdep.c (ia64_frameless_function_invocation): Implement.
4680 * config/ia64/linux.mh (NATDEPFILES): Use thread-db.o and lin-lwp.o
4681 for thread support instead of linux-thread.o and lin-thread.o.
4682 * config/ia64/nm-linux.h (PREPARE_TO_PROCEED, GET_THREAD_SIGNALS,
4683 ATTACH_LWP): Define to use the following lin-lwp.c functions...
4684 (lin_lwp_prepare_to_proceed, lin_thread_get_thread_signals,
4685 lin_lwp_attach_lwp): Declare.
4689 * mips-tdep.c (do_fp_register_row, do_fp_register_row): Fix printf
4694 * solib-aix5.c (solib-svr4.h): Remove include.
4695 (solib_break_names): Delete names which aren't actually
4697 (bkpt_names): Remove.
4698 (aix5_relocate_main_executable, bfd_lookup_symbol): Replace calls
4699 to STREQ() with equivalent calls to strcmp().
4700 (in_svr4_dynsym_resolve_code, enable_break, bfd_lookup_symbol,
4701 aix5_solib_create_inferior_hook): Revise comments.
4702 (enable_break): Remove old ``bkpt_names'' code.
4706 * Makefile.in (SFILES): Add frame.c .
4707 (COMMON_OBS): Add frame.o .
4708 (frame.o): New target.
4710 * frame.c (find_saved_register):
4711 (default_get_saved_register):
4712 (get_saved_register):
4713 (read_relative_register_raw_bytes_for_frame):
4714 (read_relative_register_raw_bytes): Moved to here.
4715 * regcache.c: From here.
4719 * solib-aix5.c: New file.
4723 * solib.c (info_sharedlibrary_command): Don't assume pointers
4724 are the same size of long, call longest_local_hex_string_custom().
4726 * solib-svr4.c (LM_ADDR): LM_ADDR is a signed offset, so
4727 extract_signed_integer() should be called instead of
4732 * MAINTAINERS: Add Martin Hunt to Write After Approval list.
4737 * mips-tdep.c (mips_register_raw_size): If FP_REGISTER_DOUBLE,
4738 then floating point registers are 8 bytes.
4742 * parse.c (write_exp_msymbol): Make the type CORE_ADDR, to
4743 accomodate 64-bit addresses.
4748 * symtab.c (lookup_symbol_aux): Call lookup_symbol_aux, not
4749 lookup_symbol, when trying to find a symbol with a mangled name,
4750 to avoid infinite recursion.
4754 * TODO (5.2): Mention G++ 3.0 ABI. General cleanups.
4758 * arm-tdep.c (check_prologue_cache): Fix off by 1 error.
4759 (save_prologue_cache): Ditto.
4764 * partial-stab.h (switch): Check that pst is not null
4765 before dereferencing it.
4770 * symfile.c (add_symbol_file_command): Always initialize
4771 my_cleanup using a NULL cleanup.
4775 * demangle.c (demangling_style_names): New variable.
4776 (_initialize_demangler): Fill demangling_style_names with the
4777 names of known demangling styles from libiberty_demanglers[]. Use
4778 add_set_enum_cmd instead of add_set_cmd, to get completion on
4779 demangling style names.
4781 * proc-api.c (_initialize_proc_api): Make `procfs-file' use
4782 file-name completion.
4784 * remote-rdi.c (_initialize_remote_rdi): Ditto for `rdilogfile'.
4786 * solib.c (_initialize_solib): Ditto for `solib-search-path' and
4787 `solib-absolute-prefix'.
4789 * tracepoint.c (_initialize_tracepoint): Ditto for
4792 * win32-nat.c (_initialize_inftarg): Ditto for `dll-symbols'.
4794 * cli/cli-cmds.c (init_cli_cmds): Make `shell' and `make' use
4795 file-name completion.
4797 * infcmd.c (_initialize_infcmd): Make the following commands use
4798 the file-name completer: `tty', `args', `path', `paths', and
4803 * go32-nat.c: Include i387-nat.h.
4804 (fetch_register): New function, uses some of the guts of
4805 go32_fetch_registers and calls i387_supply_register.
4806 (go32_fetch_registers): Most of the code moved into
4807 fetch_register. Use i387_supply_fsave.
4808 (store_register): Use i387_fill_fsave instead of custom code.
4809 (go32_store_registers): Use i387_fill_fsave.
4811 * Makefile.in (go32-nat.o): Depend on i387-nat.h.
4813 * config/i386/go32.mh (NATDEPFILES): Add i387-nat.o.
4815 * completer.c (gdb_completer_file_name_break_characters): Remove
4816 slash from file-name break characters.
4817 [__MSDOS__]: Special definition for DOS/Windows file names.
4818 (line_completion_function): When completing on file names, bump
4819 `p' to the first file-name constituent character of `word', before
4820 invoking the completer.
4824 * i387-nat.c: Include "i387-nat.h". Use regnum instead of regno
4825 consistently for parameter names. Fix comments accordingly.
4826 (i387_supply_register): New function.
4827 (i387_supply_fsave): Implement using i387_supply_register.
4828 * i387-nat.h: Use regnum instead of regno consistently for
4829 parameter names. Fix comments accordingly.
4830 (i387_supply_register): New prototype.
4834 * remote.c (build_remote_gdbarch_data): Use new TARGET_ADDR_BIT
4835 instead of TARGET_PTR_BIT (to support Harvard architectures).
4840 * hpux-thread.c (hpux_thread_xfer_memory): Add mem_attrib
4841 argument to parameter list and to call in order to conform to
4842 to_xfer_memory field of struct target_ops.
4846 * somsolib.c (som_solib_add_solib_objfile): Do not use
4847 section relocation feature of syms_from_objfile. Do my own
4848 section relocation, offsetting each section of the som by
4849 either text_addr - text_link_addr or data_start.
4853 * TODO (5.1): Move ``Hardware watchpint problems'' out of 5.1.
4857 * MAINTAINERS (paper trail): Update.
4861 * target.h (target_fetch_registers): Fix comment.
4865 * f-exp.y: Include <ctype.h>.
4866 (parse_number): Ensure that ``i'' is always initialized.
4870 * MAINTAINERS: Add myself to paper trail section.
4874 * configure.in (AC_CHECK_HEADERS): Add sys/file.h.
4875 * configure, config.in: Regenerate.
4876 * corelow.c: Include <sys/file.h> if present.
4880 * inflow.c (terminal_ours_1): Initialize ``osigtou''. Only
4881 declare when have SIGTTOU.
4885 * config/djgpp/fnchange.lst: Add entries for gdb/gdbtk/*/ChangeLog-*.
4889 * MAINTAINERS: Update my email address.
4893 * NEWS: Document that "info symbol" works with COFF debug info and
4896 * minsyms.c (lookup_minimal_symbol_by_pc_section): Don't skip
4897 symbols whose SYMBOL_BFD_SECTION is NULL.
4901 Get rid of AIX specific PC_LOAD_SEGMENT, replace with PC_SOLIB.
4902 * xcoffsolib.c (xcoff_solib_address): Renamed from
4903 pc_load_segment_name. Return NULL if address is not in a shared
4904 library. Cleanup shared library name construction, using xasprintf.
4905 Format shared library member names consistent with format in exec.c.
4906 (solib_info): Format shared library member names consistent with
4908 * config/rs6000/nm-rs6000.h: Replace PC_LOAD_SEGMENT with PC_SOLIB,
4909 using xcoff_solib_address for PC_SOLIB definition.
4910 * stack.c (print_frame): Remove PC_LOAD_SEGMENT code, no longer
4915 * mipsread.c (read_alphacoff_dynamic_symtab): Replace alloca calls
4916 with xmalloc calls and cleanups.
4920 * rs6000-nat.c (child_xfer_memory): Add missing parameter
4921 'struct mem_attrib *' required by 2001-01-23 change.
4925 Updates to "make TAGS":
4926 * Makefile.in (ALLDEPFILES): Remove altos-xdep.c arm-convert.s
4927 arm-xdep.c convex-tdep.c convex-xdep.c pyr-tdep.c pyr-xdep.c
4929 (TAGFILES_NO_SRCDIR): Add $(SUBDIR_CLI_SRCS).
4933 * config/djgpp/fnchange.lst: Remove extraneous "too many dots".
4938 * defs.h (continuation): Remove unused global variable.
4942 * configure.tgt: Remove references to convex, pyramid, altos and
4944 * configure.host: Ditto.
4945 * MAINTAINERS: Ditto.
4948 * tahoe-tdep.c: Delete obsolete file.
4949 * pyr-xdep.c: Ditto.
4950 * pyr-tdep.c: Ditto.
4951 * convex-tdep.c: Ditto.
4952 * convex-xdep.c: Ditto.
4953 * config/tahoe/xm-tahoe.h: Ditto.
4954 * config/tahoe/tm-tahoe.h: Ditto.
4955 * config/tahoe/tahoe.mt: Ditto.
4956 * config/tahoe/tahoe.mh: Ditto.
4957 * config/pyr/xm-pyr.h: Ditto.
4958 * config/pyr/tm-pyr.h: Ditto.
4959 * config/pyr/pyramid.mt: Ditto.
4960 * config/pyr/pyramid.mh: Ditto.
4961 * config/m68k/xm-altos.h: Ditto.
4962 * config/m68k/tm-altos.h: Ditto.
4963 * config/m68k/altos.mt: Ditto.
4964 * config/m68k/altos.mh: Ditto.
4965 * config/convex/xm-convex.h: Ditto.
4966 * config/convex/tm-convex.h: Ditto.
4967 * config/convex/convex.mt: Ditto.
4968 * config/convex/convex.mh: Ditto.
4969 * config/convex/Convex.notes: Ditto.
4970 * config/arm/xm-arm.h: Ditto.
4971 * config/arm/nm-arm.h: Ditto.
4972 * config/arm/arm.mt: Ditto.
4973 * config/arm/arm.mh: Ditto.
4974 * arm-convert.s: Ditto.
4975 * arm-xdep.c: Ditto.
4976 * altos-xdep.c: Ditto.
4980 * defs.h (internal_error, internal_verror): Add __FILE__ and
4982 * utils.c (internal_error, internal_verror): Update.
4984 * v850-tdep.c: Update calls to internal_error.
4990 * symm-nat.c: Ditto.
4991 * sparc-tdep.c: Ditto.
4994 * rs6000-tdep.c: Ditto.
4995 * rs6000-nat.c: Ditto.
4997 * remote-vx.c: Ditto.
4998 * remote-sim.c: Ditto.
4999 * remote-mips.c: Ditto.
5000 * regcache.c: Ditto.
5001 * objfiles.h: Ditto.
5002 * objfiles.c: Ditto.
5003 * mn10300-tdep.c: Ditto.
5004 * mips-tdep.c: Ditto.
5006 * m68k-tdep.c: Ditto.
5008 * language.c: Ditto.
5009 * infptrace.c: Ditto.
5010 * inferior.h: Ditto.
5012 * ia64-tdep.c: Ditto.
5013 * i386-tdep.c: Ditto.
5014 * i386-linux-nat.c: Ditto.
5015 * hppah-nat.c: Ditto.
5016 * go32-nat.c: Ditto.
5020 * event-loop.c: Ditto.
5021 * dwarf2read.c: Ditto.
5023 * d30v-tdep.c: Ditto.
5024 * d10v-tdep.c: Ditto.
5025 * cli/cli-setshow.c: Ditto.
5026 * cli/cli-script.c: Ditto.
5028 * breakpoint.c: Ditto.
5030 * arch-utils.c: Ditto.
5031 * a29k-tdep.c: Ditto.
5032 * gdb_assert.h: Ditto.
5033 * gdbarch.sh: Ditto.
5034 * gdbarch.h, gdbarch.c: Re-generate.
5039 * event-top.h [!STOP_SIGNAL]: #include <signal.h>.
5043 * remote-sim.c (dump_mem): Cleanup printf format argument.
5044 * MAINTAINERS: Update, mn10300-elf now builds.
5048 * event-top.c: Remove duplicate #include <signal.h>.
5052 * sol-thread.c (restore_inferior_pid): Save the PID in a freshly
5054 (save_inferior_pid): Restore the PID from that tempoary
5055 buffer. Delete the buffer.
5056 * utils.c (make_cleanup_close, do_close_cleanup): Ditto for FD.
5060 * MAINTAINERS: Add ``The Obvious Fix Rule''.
5064 * MAINTAINERS: Add Michael Snyder to Solaris/SPARC list.
5068 * gdbarch.sh: Include "gdb_assert.h".
5069 (struct gdbarch): Change ``nr_data'' to unsigned.
5070 (alloc_gdbarch_data, free_gdbarch_data): New functions.
5071 (gdbarch_free): Free the data-pointer vector. Use xfree to delete
5072 architecture vector.
5073 (struct gdbarch_data, struct gdbarch_data_registration): Move init
5074 method to gdbarch_data. Add free method, make index unsigned.
5075 (struct gdbarch_data_registry): Make nr unsigned.
5076 (register_gdbarch_data): Add free parameter. Store in
5078 (init_gdbarch_data): Use set_gdbarch_data.
5079 (set_gdbarch_data): New function.
5081 * gdbarch.h, gdbarch.c: Re-generate.
5085 * ser-unix.c (hardware_print_tty_state) [HAVE_SGTTY]: Call
5086 fprintf_filtered with correct arguments.
5091 * findvar.c: Buffers of size MAX_REGISTER_RAW_SIZE or REGISTER_BYTES
5092 must be allocated dynamically, since these are no longer constants.
5094 * regcache.c: Ditto.
5096 * sol-thread.c: Ditto.
5098 * config/sparc/sun4sol2.mh (MH_CFLAGS): Add -I/usr/include/v9, as a
5099 work-around for a missing Sun header file in solaris for sparc64.
5103 * config/arm/linux.mh (NATDEPFILES): Add proc-service.o,
5104 thread-db.o, lin-lwp.o; remove lin-thread.o, linux-thread.o.
5105 * config/arm/nm-linux.h (PREPARE_TO_PROCEED, ATTACH_LWP,
5106 GET_THREAD_SIGNALS): Define.
5107 * arm-linux-nat.c (fill_gregset): Correct type of argument.
5108 (supply_gregset): Likewise.
5109 (fill_fpregset): Likewise.
5110 (supply_fpregset): Likewise.
5114 * valops.c (value_cast): If casting a scalar to a pointer, do not
5115 issue a message about truncation unless it exceeds the length of
5116 an address, not the length of a pointer. This is because what the
5117 user gives us is an address, not a pointer, and we will ultimately
5118 convert it (via ADDRESS_TO_POINTER) to a pointer, not truncate it
5119 to a pointer. This allows things like "print *(int *)0x01000234"
5120 to work without generating a misleading message on a target having
5121 two byte pointers and four byte addresses.
5125 * win32-nat.c: Change PTR to void * throughout.
5129 * signals.h: Removed.
5130 * event-top.c (#include <signal.h>): Changed from signals.h.
5131 * inflow.c: Likewise.
5132 * mac-xdep.c: Likewise.
5133 * ser-pipe.c: Likewise.
5134 * ser-tcp.c: Likewise.
5135 * standalone.c: Likewise.
5137 * utils.c: Likewise.
5138 * Makefile.in: Removed signals.h from dependencies.
5143 * inferior.h (step_over_calls_kind): Remove trailing comma from
5145 (step_over_calls): Declare as extern rather than global.
5149 * sh-tdep.c: Update copyright.
5150 (sh_extract_return_value): Rewrite.
5151 (sh3e_sh4_extract_return_value): New function.
5152 (sh_gdbarch_init): Initialize gdbarch_extract-return_value to new
5153 version of the function for sh3e and sh4 CPUs.
5157 * hppah-nat.c (child_xfer_memory): Add parameter 'struct mem_attrib *'
5158 to conform with interface change.
5162 * config/djgpp/fnchange.lst: Tweak to make consistent with the
5165 * config/djgpp/djconfig.sh: Use explicit absolute file name when
5168 * ser-go32.c (dos_write) [UART_FIFO_WORKS]: Use outportsb only if
5169 UART_FIFO_WORKS is defined. Otherwise use outportb.
5172 * go32-nat.c (go32_xfer_memory): Make the argument list consistent
5173 with target.h's `to_xfer_memory' member.
5177 * ppc-bdm.c (#include <signal.h>): Removed.
5178 * remote-array.c: Likewise.
5179 * remote-bug.c: Likewise.
5180 * remote-e7000.c: Likewise.
5181 * remote-mips.c: Likewise.
5182 * remote-os9k.c: Likewise.
5183 * remote-st.c: Likewise.
5184 * remote-udi.c: Likewise.
5185 * remote-vx29k.c: Likewise.
5186 * remote-vx68.c: Likewise.
5187 * remote-vx960.c: Likewise.
5188 * remote-vxmips.c: Likewise.
5189 * remote-vxsparc.c: Likewise.
5193 * remote-utils.h (sr_set_device): Changed free() to xfree() where
5194 appropriate. Also changed Copyright to include 2001.
5195 * symtab.h (obstack_chunk_free, SYMBOL_INIT_DEMANGLED_NAME): Likewise.
5196 * value.h (value_free): Likewise.
5197 * gdbarch.sh (gdbarch_free): Likewise.
5198 * gdbarch.c, gdbarch.h: Regenerated.
5202 * cli/cli-cmds.c (apropos_command): Changed occurance of free() to
5203 xfree(). Also changed Copyright to include 2001.
5207 * monitor.c (#include "gdb_wait.h"): Removed.
5209 * ppc-bdm.c: Likewise.
5210 * remote-adapt.c: Likewise.
5211 * remote-array.c: Likewise.
5212 * remote-bug.c: Likewise.
5213 * remote-e7000.c: Likewise.
5214 * remote-eb.c: Likewise.
5215 * remote-es.c: Likewise.
5216 * remote-mips.c: Likewise.
5217 * remote-mm.c: Likewise.
5218 * remote-nindy.c: Likewise.
5219 * remote-os9k.c: Likewise.
5220 * remote-rdi.c: Likewise.
5221 * remote-rdp.c: Likewise.
5222 * remote-sds.c: Likewise.
5223 * remote-sim.c: Likewise.
5224 * remote-st.c: Likewise.
5225 * remote-udi.c: Likewise.
5226 * remote-vx.c: Likewise.
5227 * remote-vx29k.c: Likewise.
5228 * remote-vx68.c: Likewise.
5229 * remote-vx960.c: Likewise.
5230 * remote-vxmips.c: Likewise.
5231 * remote-vxsparc.c: Likewise.
5232 * remote.c: Likewise.
5233 * ser-pipe.c: Likewise.
5234 * ser-unix.c: Likewise.
5235 * Makefile.in: Updated dependencies.
5239 * event-loop.c: Change inclusion of string.h to gdb_string.h and
5240 updated the copyright notice.
5241 * ser-pipe.c: Ditto.
5242 * mi/mi-cmds.c: Ditto.
5243 * mi/mi-console.c: Ditto.
5244 * mi/mi-getopt.c: Ditto.
5245 * mi/mi-parse.c: Ditto.
5249 * MAINTAINERS: Add David Smith to Write After Approval list.
5253 * cli/cli-utils.c (putchar_filtered): Move function from here.
5254 * utils.c (putchar_filtered): To here.
5255 * cli/cli-utils.h (putchar_filtered): Move declaration from here.
5256 * defs.h (putchar_filtered): To here.
5260 * configure.in (AC_CHECK_FUNCS): Replace vfork test with
5261 AC_FUNC_VFORK macro.
5262 * config.in, configure: Re-generate.
5264 * gdb_vfork.h: New file.
5265 * ser-pipe.c (pipe_open): Update. Include "gdb_vfork.h".
5266 * fork-child.c (fork_inferior): Ditto.
5270 * defs.h (strsave): Delete declaration.
5271 * utils.c (strsave): Delete definition.
5272 * TODO (strsave): Update
5274 * mac-xdep.c (tilde_expand): Replace strsave with xstrdup.
5275 * sparcl-tdep.c (sparclite_open): Ditto.
5276 * mips-tdep.c (mips_set_processor_type_command): Ditto.
5277 (_initialize_mips_tdep): Ditto.
5278 * solib.c (solib_open): Ditto.
5279 * symfile.c (add_filename_language): Ditto.
5280 (set_ext_lang_command): Ditto.
5281 * source.c (init_source_path): Ditto.
5283 * sh3-rom.c (sh3_open): Ditto.
5285 * serial.c (serial_open): Ditto.
5286 * remote-mips.c (common_open): Ditto.
5287 * monitor.c (monitor_open): Ditto.
5288 * m32r-rom.c (m32r_upload_command): Ditto.
5289 * infcmd.c (path_command): Ditto.
5290 * f-exp.y (parse_number): Ditto.
5291 * breakpoint.c (create_longjmp_breakpoint): Ditto.
5292 (create_thread_event_breakpoint): Ditto.
5293 * arc-tdep.c (arc_set_cpu_type_command): Ditto.
5294 (_initialize_arc_tdep): Ditto.
5296 Tue Jan 30 15:14:26 2001 Andrew Cagney <cagney@skil>
5298 * cli/cli-script.c (define_command): Check for a bad hook value in
5303 * configure/sh/embed.mt: New file.
5304 * configure/sh/linux.mt: New file.
5305 * configure/sh/sh.mt: Removed.
5306 * configure.tgt (sh-*-hms,sh-*-coff*,sh-*-elf*,sh-*-linux): New targets.
5311 * symtab.c (block_lookup_symbol): Use 'namespace' parameter in
5312 symbol comparisons in binary search.
5316 * win32-nat.c (child_xfer_memory): Add missing argument required by
5321 * ui-out.c (do_list_end): New function.
5322 (make_cleanup_ui_out_list_end): New function.
5323 * ui-out.h: Provide prototype for make_cleanup_ui_out_list_end.
5324 * stack.c (print_frame) [UI_OUT]: Call
5325 make_cleanup_ui_out_list_end to make sure we mark the end of the
5326 list if we do a non-local exit. At the end of the function,
5327 instead of calling ui_out_list_end directly, let do_cleanups
5332 Fix double parsing of filenames passed as command line arguments
5333 to GDB (causes weird handling of escape characters).
5334 Also, remove dependencies on the CLI from libgdb.
5335 * call-cmds.h: Remove declaration of exec_file_command().
5336 * gdbcore.h: Remove declaration of exec_file_command().
5337 Add declarations for exec_open() and exec_file_clear().
5338 * symfile.h: Add declarations for symbol_file_add_main() and
5339 symbol_file_clear().
5340 * exec.c (exec_open): New function. Implements to_open for exec
5342 (exec_file_clear): New function. Makes GDB forget about a previously
5343 specified executable file.
5344 (exec_file_attach): Move parsing of arguments from here ...
5345 (exec_file_command): ... to here.
5346 (init_exec_ops): Use exec_open(), not exec_file_command() to
5347 implement to_open for exec targets.
5348 * symfile.c (symbol_file_add_main): New function. Call symbol_file_add()
5349 with default values. Used when the file name has already been parsed.
5350 (symbol_file_clear): New function. Makes GDB forget about previously
5352 (symbol_file_command): Call the above function instead of inline code.
5353 * main.c: Include "symfile.h" and "gdbcore.h" instead of the deprecated
5355 (captured_main): Call exec_file_attach() and symbol_file_add_main()
5356 instead of exec_file_command() and symbol_file_command().
5357 (captured_main): Add comment.
5358 * corefile.c: Include "symfile.h".
5359 (core_file_command): Call symbol_file_add_main() instead of
5360 symbol_file_command().
5361 (reopen_exec_file): Call exec_open() instead of exec_file_command().
5362 * infcmd.c: Include "symfile.h".
5363 (attach_command): Call symbol_file_add_main() instead of
5364 symbol_file_command().
5365 * infrun.c: Remove comment about the inclusion of "symfile.h",
5366 not any longer appropriate.
5367 (follow_exec): Call symbol_file_add_main() instead of
5368 symbol_file_command().
5369 * remote-es.c: Include "symfile.h".
5370 (es1800_load): Call symbol_file_add_main() instead of
5371 symbol_file_command().
5372 * remote-vx.c: Remove comment about the inclusion of "symfile.h",
5373 not any longer appropriate.
5374 (vx-wait): Call symbol_file_add_main() instead of
5375 symbol_file_command().
5376 * solib-svr4.c (open_symbol_file_object): Call symbol_file_add_main()
5377 instead of symbol_file_command().
5378 * v850ice.c (ice_file): Call exec_open(), exec_file_attach() and
5379 symbol_file_add_main() instead of exec_file_command() and
5380 symbol_file_command().
5381 * Makefile.in: Update dependencies.
5385 * remote-udi.c (udi_open): Change strdup to xstrdup.
5386 * thread.c (thread_apply_all_command): Change strdup to xstrdup.
5387 Update copyright message.
5388 * varobj.c (delete_variable_1): Likewise.
5390 * gdb_string.h: Remove declaration of strdup. Update copyright
5392 * config/xm-mpw.h: Likewise.
5393 * config/i386/xm-i386mach.h: Likewise.
5394 * config/m68k/xm-apollo68b.h: Likewise.
5395 * config/m68k/xm-hp300bsd.h: Likewise.
5396 * config/rs6000/xm-rs6000.h: Likewise.
5397 * config/vax/xm-vaxult.h: Remove declaration of strdup.
5398 * config/vax/xm-vaxult2.h: Likewise.
5402 * MAINTAINERS: Add Jeff Holcomb to Write After Approval list.
5406 * target.c (target_xfer_memory_partial): Return -1 on failure due
5407 to invalid access mode attribute.
5411 * win32-nat.c (_initialize_core_win32): Prototype correctly.
5415 * config/alpha/tm-fbsd.h: Update copyright.
5416 (USE_STRUCT_CONVENTION): Define in terms of
5417 alphabsd_use_struct_convention.
5418 * config/alpha/fbsd.mt (TDEPFILES): Add alphafbsd-tdep.c.
5419 * alphafbsd-tdep.c: New file.
5423 * top.c (print_gdb_version): Update Copyright year.
5427 * dcache.c (dcache_write_line): Fix typo.
5429 * memattr.c (delete_mem_region): Replace free() with xfree().
5430 (mem_number): Add explicit type.
5432 * sol-thread.c (sol_thread_xfer_memory): Add attrib argument.
5433 (rw_common): Likewise.
5437 * infcmd.c (get_inferior_args, set_inferior_args): Accessor functions
5438 for the inferior program arguments.
5439 (run_command, run_no_args_command, init_infcmd)): Use accessor
5440 functions to set the inferior program arguments.
5441 * inferior.h: Add definitions to the accessor functions above.
5445 * dwarf2read.c (read_tag_const_type, read_tag_volatile_type):
5446 Implement these correctly, using make_cv_type.
5450 * exec.c (xfer_memory): Add attrib argument.
5451 * infptrace.c (child_xfer_memory): Likewise.
5452 * lin-lwp.c (lin_lwp_xfer_memory): Likewise.
5453 * monitor.c (monitor_xfer_memory): Likewise.
5454 * remote-adapt.c (adapt_xfer_inferior_memory): Likewise.
5455 * remote-array.c (array_xfer_memory): Likewise.
5456 * remote-bug.c (bug_xfer_memory): Likewise.
5457 * remote-e7000.c (e7000_xfer_inferior_memory): Likewise.
5458 * remote-eb.c (eb_xfer_inferior_memory): Likewise.
5459 * remote-es.c (es1800_xfer_inferior_memory): Likewise.
5460 * remote-mips.c (mips_xfer_memory): Likewise.
5461 * remote-mm.c (mm_xfer_inferior_memory): Likewise.
5462 * remote-nindy.c (nindy_xfer_inferior_memory): Likewise.
5463 * remote-os9k.c (rombug_xfer_inferior_memory): Likewise.
5464 * remote-rdi.c (arm_rdi_xfer_memory): Likewise.
5465 * remote-rdp.c (remote_rdp_xfer_inferior_memory): Likewise.
5466 * remote-sds.c (sds_xfer_memory): Likewise.
5467 * remote-sim.c (gdbsim_xfer_inferior_memory): Likewise.
5468 * remote-st.c (st2000_xfer_inferior_memory): Likewise.
5469 * remote-udi.c (udi_xfer_inferior_memory): Likewise.
5470 * remote-vx.c (vx_xfer_memory): Likewise.
5471 * remote.c (remote_xfer_memory): Likewise.
5472 * target.c (debug_to_xfer_memory, do_xfer_memory): Likewise.
5473 * target.h (child_xfer_memory, do_xfer_memory, xfer_memory): Likewise.
5474 * thread-db.c (thread_db_xfer_memory): Likewise.
5476 * target.h (#include "memattr.h"): Added.
5477 (target_ops.to_xfer_memory): Add attrib argument.
5479 * wince.c (_initialize_inftarg): Removed call to set_dcache_state.
5480 * dcache.h (set_dcache_state): Removed declaration.
5481 * dcache.c (set_dcache_state): Removed definition
5483 * dcache.c: Update module comment, as dcache is now enabled and
5484 disabled with memory region attributes instead of by the global
5485 variable "remotecache". Add comment describing the interaction
5486 between dcache and memory region attributes.
5487 (dcache_xfer_memory): Add comment describing benefits of moving
5488 cache writeback to a higher level.
5489 (dcache_struct): Removed cache_has_stuff field. This was used to
5490 record whether the cache had been accessed in order to invalidate
5491 it when it was disabled. However, this is not needed because the
5492 cache is write through and the code that enables, disables, and
5493 deletes memory regions invalidate the cache. Add comment which
5494 suggests that we could be more selective and only invalidate those
5495 cache lines containing data from those memory regions.
5496 (dcache_invalidate): Updated.
5497 (dcache_xfer_memory): Updated.
5499 (dcache_alloc): Don't abort() if dcache_enabled_p is clear.
5500 (dcache_xfer_memory): Removed code that called do_xfer_memory() to
5501 perform a uncached transfer if dcache_enabled_p was clear. This
5502 function is now only called if caching is enabled for the memory
5504 (dcache_info): Always print cache info.
5506 * target.c (do_xfer_memory): Add attrib argument.
5507 (target_xfer_memory, target_xfer_memory_partial): Break transfer
5508 into chunks defined by memory regions, pass region attributes to
5510 * dcache.c (dcache_read_line, dcache_write_line): Likewise.
5512 * Makefile.in (SFILES): Add memattr.c.
5513 (COMMON_OBS): Add memattr.o.
5514 (dcache.o): Add target.h to dependencies.
5515 * memattr.c: New file.
5516 * memattr.h: Likewise.
5518 * config/m32r/m32r.mt (GDBSERVER_LIBS): Added ../../intl/libintl.a.
5519 * config/mips/vr5000.mt (GDBSERVER_LIBS): Likewise.
5520 * config/tic80/tic80.mt (GDBSERVER_LIBS): Likewise.
5521 * gdbserver/low-sim.c (#include "defs.h"): Removed.
5522 (mygeneric_load): Rename from generic_load.
5524 * gdbserver/low-hppabsd.c (#include "server.h"): Added.
5525 (#include "defs.h"): Removed.
5526 (inferior_pid, perror_with_name): Remove declarations.
5527 * gdbserver/low-linux.c: Likewise.
5528 * gdbserver/low-nbsd.c: Likewise.
5529 * gdbserver/low-sparc.c: Likewise.
5530 * gdbserver/low-sun3.c: Likewise.
5532 * i386-stub.c: Re-indent.
5533 * m68k-stub.c: Re-indent.
5537 * gdbarch.sh (PARM_BOUNDARY): Define.
5538 * gdbarch.c: Regenerate.
5539 * gdbarch.h: Regenerate.
5543 * ns32k-tdep.c: #include "frame.h"
5544 * config/ns32k/tm-umax.h (FRAME_FIND_SAVED_REGS): Restore. It
5545 appears to have been inadvertantly removed sometime in May 1999.
5547 * Revert 2000-11-09 changes where shared library objects were
5548 moved from NATDEPFILES to TDEPFILES on NetBSD targets. While
5549 we'd like to be able to debug dynamically linked executables,
5550 this makes it impossible to build a cross debugger on a many
5553 * config/i386/nbsd.mt: Remove solib.o, solib-svr4.o from TDEPFILES.
5554 * config/i386/nbsdelf.mt: Likewise.
5555 * config/m68k/nbsd.mt: Likewise.
5556 * config/ns32k/nbsd.mt: Likewise.
5557 * config/powerpc/nbsd.mt: Likewise.
5558 * config/sparc/nbsd.mt: Likewise.
5559 * config/sparc/nbsdelf.mt: Likewise.
5560 * config/i386/nbsd.mh: Add solib.o, solib-svr4.o to NATDEPFILES.
5561 * config/i386/nbsdelf.mh: Likewise.
5562 * config/m68k/nbsd.mh: Likewise.
5563 * config/ns32k/nbsd.mh: Likewise.
5564 * config/powerpc/nbsd.mh: Likewise.
5565 * config/sparc/nbsd.mh: Likewise.
5569 * dbxread.c (read_ofile_symtab): Stay with AUTO_DEMANGLING for G++.
5570 (process_one_symbol): Likewise.
5571 * dwarfread.c (handle_producer): Likewise.
5575 * configure.in (build_warnings): Disable -Wuninitialized until GDB
5576 compiles with -Wuninitialized,-Werror.
5577 * configure: Regenerate.
5579 * MAINTAINERS: Add list of buildable targets.
5583 * defs.h (STRCMP): Delete macro.
5585 * objfiles.c (objfile_relocate): Replace STRCMP with call to
5587 * symtab.c (lookup_partial_symbol, lookup_block_symbol): Ditto.
5588 * symfile.c (compare_symbols): Ditto.
5589 * standalone.c (open): Ditto.
5590 * remote-es.c (verify_break): Ditto.
5591 * cli/cli-decode.c (add_cmd, add_show_from_set): Ditto.
5593 * symfile.c (compare_psymbols): Delete comment refering to STRCMP.
5597 * varobj.c (FREEIF): Delete macro.
5598 (varobj_set_value, free_variable): Replace FREEIF with ``xfree''
5603 * arc-tdep.c (arc_cpu_type_table): Add new arc core numbers.
5604 (arc_print_insn): No bfd available, so pass NULL to
5605 arc_get_disassembler.
5609 * symtab.c (lookup_symbol_aux): Call lookup_symbol_aux to lookup
5610 a mangled symbol rather than recursing into lookup_symbol, since
5611 this will just re-unmangle the name & call lookup_symbol_aux -
5612 leading to an infinite recursion.
5616 * infcmd.c (print_return_value): Restore another space lost by
5617 switch to UIOUT. ``$NN='' should be ``$NN =''.
5621 * target.h (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT)
5622 * breakpoint.c (TARGET_REGION_OK_FOR_HW_WATCHPOINT): Wrap macro
5623 definition in parenthesis.
5628 * remote.c (remote_remove_hw_breakpoint): Add 'len' field to Z
5630 (remote_insert_hw_breakpoint): Ditto.
5634 * config/m68k/tm-nbsd.h (USE_STRUCT_CONVENTION): Define.
5635 (BPT_VECTOR, REMOTE_BPT_VECTOR): Change to 0xf.
5636 * config/m68k/nbsd.mt (TDEPFILES): Add m68knbsd-tdep.o.
5637 * m68knbsd-tdep.c: New file.
5639 * i386nbsd-tdep.c: Remove #if 0'd out #includes.
5641 * m68knbsd-nat.c: #include gdbcore.h.
5645 * MAINTAINERS: Add J.T. Conklin to Blanket Write Privs.
5649 * procfs.c (procfs_stopped_by_watchpoint): Don't die if process
5650 goes away -- just return false (ie. not stopped by watchpoint).
5651 * source.c (openp): Fix typo in comment.
5655 * blockframe.c (generic_get_saved_register): Spelling fix.
5656 * frame.h (FRAME_FP): Spelling fix.
5660 * infcmd.c (print_return_value): Restore space lost by switch to
5661 UIOUT. ``$NN='' should be ``$NN =''.
5665 * regcache.c (set_register_cached, register_buffer,
5666 real_register, pseudo_register fetch_register, store_register):
5668 (register_changed, read_relative_register_raw_bytes_for_frame,
5669 registers_changed, registers_fetched, read_register_bytes,
5670 read_register_gen, write_register_gen, read_register,
5671 read_signed_register, write_register, supply_register): Replace
5672 register_valid[] with register_cached() and
5673 set_register_cached().
5674 (read_register_bytes, read_register_gen, write_register_gen,
5675 read_register, read_signed_register, write_register,
5676 supply_register): Replace registers[] with register_buffer().
5677 (read_register_bytes, read_register_gen, read_register,
5678 read_signed_register): Call fetch_register().
5679 (write_register_gen, write_register): Call real_register() and
5681 (write_register_bytes): Call store_register().
5682 * value.h (set_register_cached, register_buffer): Prototype.
5683 * remote.c (remote_fetch_registers): Allocate regs[] with a
5684 run-time size. Replace register_valid[] with
5685 set_register_cached().
5686 (store_register_using_P, remote_store_registers): Replace
5687 registers[] with register_buffer().
5691 * regcache.c: Change "write-back" comment to "write-through".
5692 Change "regno" to "regnum".
5693 (read_register, read_signed_register): Remove "raw" from return
5695 (supply_register): Spelling fix.
5696 * value.h: Change "regno" to "regnum".
5700 * Makefile.in (install-gdbtk): Add .itcl files to the list of files
5705 * mips-tdep.c (mips_coerce_float_to_double): Fix typo in comment.
5709 * valops.c (VALUE_SUBSTRING_START): Delete.
5713 * Makefile.in (SUBDIR_CLI_OBS): Add cli/cli-utils.o.
5714 (SUBDIR_CLI_SRCS): Add cli/cli-utils.c.
5715 (cli_utils_h): New variable.
5716 (cli/cli-utils.o): New rule.
5717 * cli/cli-utils.c: New file.
5718 * cli/cli-utils.h: New file.
5722 * config/i386/tm-i386.h (REGISTER_CONVERT_TO_VIRTUAL,
5723 REGISTER_CONVERT_TO_RAW): Delete trailing semicolon.
5727 * alphabsd-nat.c, i386-linux-nat.c, i386bsd-nat.c: Fix typo in
5732 * sh-tdep.c (sh_default_store_return_value): Allow for small return type.
5733 (sh3e_sh4_store_return_value): Call sh_default_store_return_value for
5735 * sparc-tdep.c (sparc_frame_chain): Fix typo in comment.
5736 Update copyright notice.
5738 For older changes see ChangeLog-2000
5744 version-control: never
projects / binutils.git / blob