3 * configure.in: Use mt-aix43 to handle *_TARGET defs,
8 * config.sub: Add support for configuring for pj.
12 * config.sub (maybe_os): Add support for configuring for fr30.
16 * configure.in: Do not configure or build ld for AIX
17 platforms. ld is known to be broken on these platforms.
21 * Makefile.in (LDFLAGS): Define.
25 * configure.in (i[3456]-*-mingw32*): Don't put gprof in
27 (*-*-cygwin*): Likewise.
32 * Makefile.in (GAS_SUPPORT_DIRS): Add mkdep.
33 (BINUTILS_SUPPORT_DIRS): Add mkdep.
36 * configure (tmpfile): Change cONf$$ to cNf$$ to avoid an overly
37 long file name when using DJGPP on MS-DOS.
41 * Makefile.in (check-target-libio): Remove all-target-libstdc++
42 dependency as this causes "make check" to globally "make all"
46 * Makefile.in (binutils.tar.bz2): Don't pass makeall.bat and
47 configure.bat in SUPPORT_FILES.
48 (gas+binutils.tar.bz2): Likewise.
50 * makeall.bat: Remove; obsolete.
55 * configure.bat: Remove; obsolete.
59 * configure: Add -W -Wall to the default CFLAGS when compiling with
64 * configure.in: Build ld, binutils & gas for hppa*-*-linux-gnu*.
68 * configure.in: Build ld on IRIX6.
72 * Makefile.in: Change distribution targets to use bzip2 instead of
74 (TEXINFO_SUPPORT): Set to just texinfo/texinfo.tex.
75 (taz): Don't use texinfo/gpl.texinfo or texinfo/lgpl.texinfo.
79 * config.sub: Add mcore target.
83 * config.guess (ppc-*-linux-gnu): Also use ld emul elf32ppclinux.
87 * config.sub: Updated to match latest EGCS version.
91 * ltmain.sh: [mode link] Always use CC given by ltconfig.
95 * ltconfig, ltmain.sh: Update to libtool 1.2f.
99 * configure.in (noconfigdirs): Don't build libstub for arm-elf targets.
100 (noconfigdirs): Don't build any bsp stuff for for arm-oabi targets.
101 Bad merge removed these two changes.
105 * configure.in (i?86-*-beos*): Do config gperf; don't config
106 gdb, newlib, or libgloss.
110 * config.sub: Add support for mcore targets.
114 * configure.in (d30v-*): Use config/mt-d30v as makefile fragment,
115 not mt-ospace, in order to shut up assembler warning about using
116 symbols that are named the same as registers.
120 * Makefile.in (all-target-cygmon): Added all-target-bsp to the
121 dependency list for all-target-cygmon.
125 * config-ml.in: Check $host, not $target, for selective multilibs.
126 (arm-*-*): Allow disabling of biendian, h/w fp, 26 bit apcs,
127 thumb interworking, and underscore prefix multilibs.
131 * missing: Update to version from current automake.
135 * configure (gxx_include_dir): Removed.
137 * configure.in (gxx_include_dir): Handle it.
138 * Makefile.in: Likewise.
142 * config.sub (mips64vr4111,mips64vr4111el) Add.
146 * config.guess: Correct typo for detecting ELF on FreeBSD.
150 * config/mh-go32: Delete.
151 * config/mh-djgpp: New. Renamed from mh-go32.
152 * configure.in (pc-msdosdjgpp): Set host_makefile_frag to
157 * Makefile.in (all-target-bsp): Added all-gcc all-binutils and
158 all-target-newlib to dependency list for all-target-bsp.
162 * config.sub: Add i386-uwin support.
163 * config.guess: Likewise.
167 * configure.in: cleanup, add mh-*pic handling for arm, special
172 * configure.in (noconfigdirs): Removed target-libgloss so libnosys.a
177 * configure.in: Added bsp support to arm-*-coff and arm-*-elf
182 * config.sub: Rename CYGNUS LOCAL to EGCS LOCAL
186 * config.sub: Check for "cygwin*" rather than "cygwin32*"
190 * config.sub: Fix typo in arm recognition.
194 * configure.in (noconfigdirs): Changed target_configdirs to
195 include target-bsp only for m68k-*-elf* and m68k-*-coff*
196 rather than m68k-*-* since it is not known to work on
197 m68k-aout. Ditto for arm-*-*oabi.
201 * configure.in (*-*-windows*): Remove, no longer used.
202 * config/mh-windows: Ditto.
206 * config.guess: Automatically recognise ELF on FreeBSD. From Niall
207 Smart and improved by Andrew Cagney.
211 * config.guess: Recognize openbsd-*-hppa.
215 * Makefile.in (REALLY_SET_LIB_PATH): Append $$$(RPATH_ENVVAR)
216 only if it is not empty.
222 * config.guess: Modified to recognize uname's armv* syntax.
224 * config.sub: Modified to recognize uname's armv* syntax.
228 * configure.in: Added target-bsp for sparclite.
232 * config.sub: Recognize alphapca5[67] and up to alphaev8.
236 * configure.in: Add support for strongarm port.
237 * config.sub: Add support for strongarm target.
241 * configure.in (*-*-cygwin32*): Use config/mh-cygwin instead of
242 the old name config/mh-cygwin32.
247 * configure.in: Do build ld for ix86 Solaris.
251 * Makefile.in (EXTRA_GCC_FLAGS): Set AR to $AR instead of
252 $AR_FOR_TARGET. Likewise for RANLIB.
256 * config.sub (oabi): Recognize.
257 * configure.in (arm-*-oabi): Handle.
261 * config.guess: Improve detection of i686 on UnixWare 7.
265 * config.guess: Add support for i386-pc-interix.
266 * config.sub: Likewise.
267 * configure.in: Likewise.
268 * config/mh-interix: New file.
272 * Makefile.in: Remove unneeded all-target-libio from
273 from all-target-winsup target since it is now unneeded.
274 Add all-target-libtermcap in its place since it is now
279 * configure.in: makefile stub for cygwin target is probably
280 unnecessary. Remove it for now.
281 * config/mt-cygwin: Remove.
285 * configure.in: libtermcap.a should be built when cygwin is the
286 target as well as the host.
287 * config.guess: Allow mixed case in cygwin uname output.
288 * Makefile.in: Add libtermcap target.
289 * config/mt-cygwin: New file. libtermcap target info.
293 * configure.in: Add cygmon for x86-coff and x86-elf. Configure
294 cygmon for all sparclite targets, regardless of object format.
298 * configure.in: Added target-bsp for several target architectures.
300 * Makefile.in: Added rules for bsp.
304 * config.sub: Clean up handling of hppa2.0.
308 * config.guess: Use C code to identify more HP machines.
312 * config.sub: Handle hppa2.0.
316 * config.guess: Improve detection of hppa2.0 processors.
320 * config.guess: Recognize FreeBSD using ELF automatically.
324 * configure (skip-this-dir): Add handling for new shell script, which
325 might be created by a sub-directory's configure to indicate, this particular
326 directory is "unwanted".
327 * Makefile.in ($(CONFIGURE_TARGET_MODULES)): Likewise.
332 * ltconfig: import from libtool, after changing libtool to
333 account for the cygwin name change.
337 * Makefile.in: CC_FOR_TARGET and CXX_FOR_TARGET should also
338 include newlib/libc/sys/cygwin and newlib/libc/sys/cygwin32.
342 * configure.in: Add libtermcap to list of cygwin dependencies.
346 * Makefile.in: modify CC_FOR_TARGET and CXX_FOR_TARGET so that
347 they include winsup/include when it's a cygwin target.
351 * configure.in (host_tools): Added zip.
352 * Makefile.in (all-target-libjava): Depend on all-zip.
353 (all-zip): New target.
354 (ALL_MODULES): Added all-zip.
355 (NATIVE_CHECK_MODULES): Added check-zip.
356 (INSTALL_MODULES): Added install-zip.
357 (CLEAN_MODULES): Added clean-zip.
361 * Makefile.in: lose "32" from comment about cygwin.
365 * configure.in: Use -Os to build target libraries for the fr30.
369 * config.sub: Add fr30.
373 * configure.in: drop "32" from config/mh-cygwin32. Check
374 cygwin* instead of cygwin32*.
375 * config.sub: Check cygwin* instead of cygwin32*.
379 * Makefile.in configure.in: Add the ability to use tcl8.1 and tk8.1
384 * config.if (cxx_interface, libstdcxx_interface): Do not try to set
385 these if the appropriate directories and files to not exist.
389 * Makefile.in (DEVO_SUPPORT): Add config.if.
393 * config.sub: Bring back lost sparcv9.
397 * config.sub: Add support for i[34567]86-pc-udk.
398 * configure.in: Likewise.
402 * Makefile.in: add bzip2 package building bits for user
404 * configure.in: ditto
408 * configure.in (target_subdir): Remove duplicate line.
412 * Makefile.in (all-automake): fix dependencies.
416 * configure.in: Minor cleanups for building in the $(target_alias)
421 * Makefile.in (bootstrap): Set r and s before make all. Use
422 BASE_FLAGS_TO_PASS in make all.
427 * Makefile.in (bootstrap): Pass TARGET_FLAGS_TO_PASS to `make all'.
432 * config.sub: Fix typo in last change.
436 * config.sub: Add support for C4x target.
437 * configure.in: Likewise.
441 * config.sub: Recognize sparcv9 just like sparc64.
445 * config.guess: Match "Pent II" or "PentII" for OpenServer.
449 * config.guess: Correctly identify Pentium II sco boxes.
451 * config.guess: Fix "tr" code. From Weiwen Liu.
455 * configure.in: Do not assume x86-svr4 or x86-unixware can handle
460 * Makefile.in (TARGET_CONFIGDIRS): Add libchill.
461 (ALL_TARGET_MODULES): Add all-target-libchill.
462 (CONFIGURE_TARGET_MODULES, CHECK_TARGET_MODULES): Similarly.
463 (INSTALL_TARGET_MODULES, CLEAN_TARGET_MODULES): Similarly.
464 (all-target-libchill): Add dependencies.
465 * configure.in (target_libs): Add libchill.
469 * config.guess: Avoid assumptions about "tr" behaves when
470 LANG is set to something other than English.
474 * configure (gxx_include_dir): Changed to
475 '${prefix}/include/g++'-${libstdcxx_interface}.
477 * config.if: New to determine the interfaces.
481 * config.guess: Detect and handle MPE/IX.
482 * config.sub: Deal with MPE/IX.
486 * configure.in: Use mh-aix43.
490 * configure: Fix --without/--disable cases for gxx-include-dir.
494 * mdata-sh: Imported. Needed for automake support.
498 * Makefile.in (taz): Try "chmod -R og=u ." before
499 "chmod og=u `find . -print`".
503 * configure.in: Add arm-elf and thumb-elf support.
507 * Makefile.in: Undo previous patch.
511 * Makefile.in (INSTALL_TARGET): Move EXTRA_TARGET_HOST_INSTALL_MODULES
513 (install-no-fixedincludes): and here
514 (INSTALL_MODULES): ... from here.
518 * config.sub: Merge with FSF.
520 * config.guess: Merge with FSF.
524 * configure (extraconfigdirs): New variable.
525 (SUBDIRS): Add extraconfigdirs and recurse on them too.
526 * Makefile.in (all): Move higher in file.
527 (EXTRA_TARGET_HOST_ALL_MODULES): New variable.
528 (EXTRA_TARGET_HOST_{INSTALL,CHECK}_MODULES): New variables.
529 (ALL_MODULES): Add EXTRA_TARGET_HOST_ALL_MODULES.
530 (CROSS_CHECK_MODULES): Add EXTRA_TARGET_HOST_CHECK_MODULES.
531 (INSTALL_MODULES): Add EXTRA_TARGET_HOST_INSTALL_MODULES.
535 * Makefile.in (all-target-libjava): Depend on all-gcc and
537 (configure-target-libjava): Depend on $(ALL_GCC).
541 * config.guess: (*-pc-sco3.2v5) Add detection for Pentium II.
542 (*-pc-unixware7) Add detection for Pentium II, Pentium Pro.
546 * ylwrap: Change absolute path checks to check for DOS style path
549 * ylwrap: Don't use a full path name if the source file is in the
552 * config-ml.in: Default to being verbose, to match Feb 18 change to
557 Brought over from egcs:
561 * configure.in (target_subdir): Set to ${target_alias} instead
566 * configure.in (target_subdir): Set to libraries if enable_multilib.
570 * Makefile.in ($(CONFIGURE_TARGET_MODULES)): If there are any
571 multilibs, force reconfiguration the first time we create
572 multilib.out in a subdirectory, in case TARGET_SUBDIR is `.'.
576 * configure.in: Strip any --no option from CONFIG_ARGUMENTS, to
577 avoid confusion with --no-recursion.
581 * configure.in: Win32 hosts shouldn't use install -x
582 * install-sh: remove -x option, and special .exe-handling
587 * config.guess: Recognize i586-pc-beos.
588 * configure.in: Don't build some bits for beos.
592 * configure: If CC is set but CFLAGS is not, and CC is gcc, make
593 CFLAGS default to -O2.
595 * ltmain.sh: Add some hacks to make SunOS --enable-shared work
600 * ltmain.sh: Correct install when using a different shell.
604 * ltconfig, ltmain.sh: Update to libtool 1.2b.
608 * makefile.vms: Update to build binutils/makefile.vms. Add install
613 * ltconfig: Update to correct AIX handling.
617 * Makefile.in (BASE_FLAGS_TO_PASS): Add TARGET_SUBDIR.
619 * configure.in (target_subdir): Set to ${target_alias} instead
624 * Makefile.in (BASE_FLAGS_TO_PASS): Add gcc_version_trigger.
625 (Makefile): Depend on $(gcc_version_trigger).
627 * configure (gcc_version): Change default initializer to empty
629 (gcc_version_trigger): New variable; pass this variable down
630 to subdir configures to enable them checking gcc's version
631 themselves. Emit make macros for both gcc_version vars.
632 (topsrcdir): Initialize reliably.
633 (recursion line): Remove --with-gcc-version=${gcc_version}.
637 * configure (enable_version_specific_runtime_libs): Implement new flag
638 --enable-version-specific-runtime-libs which installs C++ runtime stuff
639 in $(libsubdir); emit definition in each generated Makefile.
640 (gxx_include_dir): Initialize depending on
641 $enable_version_specific_runtime_libs.
645 * configure (gcc_version): Initialize properly depending on
646 how and where configure is started.
647 (recursion line): Pass a --with-gcc-version=${gcc_version}
648 to configures in subdirs.
652 * configure.in (noconfigdirs): Add configure pattern for mips tx39
657 * configure.in: Add cygmon and libstub support for mn10200.
661 * configure (gcc_version): Add new variable describing the
662 particular gcc version we're building.
663 * Makefile.in (libsubdir): Add new macro for the directory
664 in which the compiler finds executables, libraries, etc.
665 (BASE_FLAGS_TO_PASS): Pass down gcc_version, target_alias
670 * Makefile.in (local-clean): remove *.log
671 (warning.log): built with warn_summary from build.log
672 (mail-report.log): run test_summary
673 (mail-report-with-warnings.log): run test_summary including
674 warning.log in the report
678 * config.guess: Detection of Pentium II for *-sco-3.2v5*.
682 * Makefile.in (grep): Grep no longer depends on libiberty.
686 * Makefile.in: all-snavigator needs all-libgui.
690 * configure.in: Add cygmon and libstub support for mn10300.
694 * missing: Update to version from automake 1.3.
696 * ltmain.sh: On installation, don't get confused if the same name
697 appears more than once in the list of library names.
701 * config.sub: Accept m68060 and m5200 as CPU names.
705 * configure: Use && rather than using -a in test, because odd
706 strings can confuse test.
707 * configure.in: Likewise.
711 * ltconfig, ltmain.sh: Bring in Visual C++ support.
715 * Makefile.in (boostrap2-lean, bootstrap3-lean,
716 bootstrap4-lean): new targets
720 * COPYING.LIB: Update FSF address.
724 * ltconfig, ltmain.sh: Update to libtool 1.2a.
726 * Makefile.in (GASB_SUPPORT_DIRS): Remove intl; already included via
731 * ltconfig, ltmain.sh: Avoid producing a version number if
732 -version-info was not used.
736 * configure.in: Add --with-newlib to CONFIG_ARGUMENTS if we are
737 building with newlib.
741 * Makefile.in (EXTRA_GCC_FLAGS): Remove backslash at end;
742 Solaris `make' causes it to continue to next definition.
746 * configure.in: Change alpha to alpha* in several places.
750 * config.sub: Recognize sparc86x.
754 * configure.in (--enable-target-optspace): Remove debug echo.
758 * configure: Set CXXFLAGS from CXXFLAGS, not CFLAGS.
762 * ltconfig: Update cygwin32 support.
764 * Makefile.in (GAS_SUPPORT_DIRS): Add intl.
765 (BINUTILS_SUPPORT_DIRS, GASB_SUPPORT_DIRS): Likewise.
766 (GDB_SUPPORT_DIRS): Likewise.
770 * configure.in (target_makefile_frag): If --enable-target-optspace,
771 use -Os to compile target libraries rather than -O2. Default to
772 using -Os for d10v and m32r if --{enable,disable}-target-optspace is
774 * configure.in (target_cflags): Ditto for d30v.
778 * Makefile.in (all-bfd): Depend on all-intl.
779 (all-binutils): Likewise.
781 (all-gprof): Likewise.
787 * configure.in (host_tools): Fix typo, lbtool -> libtool.
791 * Makefile.in (all-bfd): Depend upon all-libiberty.
793 * ltconfig, ltmain.sh: Bring in newer cygwin32 support.
797 * Makefile.in: Add libstub.
799 * configure.in: Ditto. Build libstub for targets that have cygmon
804 * configure.in: Don't set PICFLAG on ix86-cygwin32.
808 * configure.in: Recognise i[3456]96-*-sysv5* as a valid host, and
809 use mh-sysv5 if specified. Support gprof on SCO Open Server.
813 * configure: Define DEFAULT_M4 by searching PATH.
814 * Makfile.in: Use DEFAULT_M4.
818 * ltconfig: Add cygwin32 support.
820 * Makefile.in, configure.in: Add libtool as a native only directory
821 to configure and build.
825 * Makefile.in (EXTRA_GCC_FLAGS): XFOO lines shortened.
829 * Makefile.in: add ash make rules
830 * configure.in: add ash to native_only and host_tools lists
834 * Makefile.in (all-gettext, all-intl): New targets.
835 (ALL_MODULES): Added all-gettext, all-intl.
836 (CROSS_CHECK_MODULES): Added check-gettext, check-intl.
837 (INSTALL_MODULES): Added install-gettext, install-intl.
838 (CLEAN_MODULES): Added clean-gettext, clean-intl.
840 * configure.in (host_tools): Added gettext.
841 (native_only): Likewise.
842 (noconfigdirs) [various cases]: Likewise.
843 (host_libs): Added intl.
847 * Makefile.in: Revert yesterday's change.
848 (all-target-winsup): all-target-librx stays out of here.
852 * Makefile.in (TARGET_CONFIGDIRS, ALL_TARGET_MODULES,
853 CONFIGURE_TARGET_MODULES, CHECK_TARGET_MODULES,
854 INSTALL_TARGET_MODULES, CLEAN_TARGET_MODULES, all-target-winsup):
855 Remove references to librx and libg++.
859 * Makefile.in (BASE_FLAGS_TO_PASS): Pass $(lispdir) down to
864 * Makefile.in (CC_FOR_TARGET): Use $(TARGET_SUBDIR) when passing -B
865 for newlib directory.
866 (CXX_FOR_TARGET): Likewise.
870 * ltconfig: Update after libtool/ltconfig.in change for
875 * ltconfig, ltmain.sh: Update to libtool 1.2.
879 * Makefile.in (install-gcc): Don't specify LANGUAGES here.
880 (install-gcc-cross): Instead, override LANGUAGES here.
884 * Makefile.in ($(CONFIGURE_TARGET_MODULES)): Set CONFIG_SITE to a
885 non-existent file since /dev/null loses with bash 2.0/autoconf 2.12.
889 * configure.in: Add Thumb-pe target.
892 * Makefile.in - changed sn targets to snavigator
893 * configure.in - changed sn targets to snavigator
897 * config-ml.in: After building symlink tree call make distclean
898 if a Makefile got linked into ${ml_dir}/${ml_libdir}; this happens
899 to be the case for libiberty.
903 * configure: When making link, also check the current
904 directory. The configure scripts may create one.
908 * config.sub: Accept alphapca56 and alphaev6 properly.
912 * configure.in: Revert 3 Jan change for powerpc-linux-gnulibc1.
917 * config.sub (sco5): Fix typo.
921 * Makefile.in (INSTALL_MODULES): Move install-tcl before
923 (install-itcl): Remove dependency on install-tcl.
927 * configure.in: Remove libgloss from noconfigdirs for MN10300.
931 * configure: Don't let builds be done in source tree.
935 * configure.in: Don't build libgui for a cygwin32 target when not on
940 * configure (redirect): Set to null, so default behavior of
941 configure is now --verbose.
945 * Makefile.in ($(CONFIGURE_TARGET_MODULES)): Run configure with
946 CONFIG_SITE=/dev/null to forestall lossage with site configuration.
950 * Makefile.in (BASE_FLAGS_TO_PASS, EXTRA_TARGET_FLAGS): Really add
951 this change to sync Makefile.in with its ChangeLog entries.
955 * ltmain.sh (mkdir): Check that the directory doesn't exist
956 before we exit with error, so that we don't get races during
961 * ltconfig, ltmain.sh: Update from libtool 1.0i.
965 * Makefile.in (BASE_FLAGS_TO_PASS): Don't pass PICFLAG and
967 (EXTRA_TARGET_FLAGS): Don't pass PICFLAG_FOR_TARGET.
969 * configure: Emit a definition for the new macro enable_shared
972 * config/mh-sparcpic (PICFLAG): Define to properly according
973 to current multilib configuration.
974 * config/mt-sparcpic (PICFLAG_FOR_TARGET): Define to properly
975 according to current multilib configuration.
979 * configure.in (host_tools, native_only): Add libtool.
983 * configure.in: add target-gperf to noconfigdirs for Cygwin32.
984 Fix typo in ming config comment.
988 * ltconfig, ltmain.sh: Update from libtool 1.0h.
992 * config.sub: Add tic30 cases, and map c30 to tic30.
996 * configure.in: Remove expect from noconfigdirs when target
997 is cygwin32. OK to build expect and dejagnu with Canadian
1002 * configure.in: Do build expect, dejagnu, and cvssrc for a cygwin32
1005 * config.guess: Use ${UNAME_MACHINE} rather than i386 for cygwin32
1010 * Makefile.in (BASE_FLAGS_TO_PASS): Remove passing $(local_prefix)
1011 here as it is not defined in the toplevel Makefile.
1015 * configure (package_makefile_rules_frag): New variable, which names
1016 a file with generic rules, ...
1017 Change comment to mention we now have FIVE parts.
1018 * configure: Undo last change.
1022 * config.guess: More accurate determination of HP processor types.
1023 * config.sub: More accurate determination of HP processor types.
1027 * configure (package_makefile_frag): Move inserting the
1028 ${package_makefile_frag} to where it should be according
1033 * config.guess: Add support for Linux/ARM.
1037 * .cvsignore: Remove *-info and *-install since they match
1038 release-info and mpw-install, which we don't want to just ignore.
1042 * configure.in: Revert 3 Jan change for alpha-linux-gnulibc1.
1046 * Makefile.in (FLAGS_TO_PASS): Pass down gcc_include_dir and
1047 local_prefix to sub-make invocations.
1051 * configure.in: Check makefile fragments in the source
1056 * configure.in: check whether host and target makefile
1057 fragments exist before adding them to *_makefile_frag
1061 * configure.in (target_configdirs): Add cygmon for sparc64-elf.
1065 * configure.in: Make sure we only replace RPATH_ENVVAR on
1066 lines which begin with RPATH_ENVVAR, i.e. add "^" to the
1069 * Makefile.in (BASE_FLAGS_TO_PASS): Pass RRPATH_ENVVAR down
1074 * config-ml.in (multi-do): LDFLAGS must include multilib
1079 * config.guess: Recognize i[3456]-i586-UnixWare7-sysv5.
1083 * config.sub: Add mingw32 support.
1084 * configure.in: Likewise.
1085 * mh-mingw32: New file.
1089 * configure.in: Finalize support for {alpha|powerpc}*-*-linux-gnulibc1
1093 * Makefile.in (INSTALL_TARGET): Do install-gcc first.
1094 * configure (gxx_include_dir): Provide a definition for subdirs
1095 which do not use autoconf.
1099 * config.guess: Sync with egcs. Picks up new alpha support,
1100 BeOS & some additional linux support.
1104 * config.guess: HP 9000/803 is a PA1.1 machine.
1109 * configure.in (host_makefile_frag, target_makefile_frag):
1110 Handle multiple config files.
1111 (alpha-*-linux*): Treat alpha-*-linux* as alpha-*-linux* and
1120 * configure.in (d30v-*-*): Allow configuring of libide, vmake, etc.
1124 * Makefile.in: Add libgui directory.
1125 (GDB_TK): Add all-libgui.
1126 * configure.in: Add libgui directory.
1127 * configure: Add all-libgui to GDB_TK.
1131 * config-ml.in (multidirs): Add m32r to multilib list.
1135 * Makefile.in (all-target-gperf): Change dependency to
1136 all-target-libstdc++.
1140 * config.guess: Add BeOS support.
1144 Source directory cvs renamed to cvssrc:
1145 * configure.in (host_tools): Change cvs to cvssrc.
1146 (native_only): Likewise.
1147 (noconfigdirs) [various cases]: Likewise.
1148 * Makefile.in (ALL_MODULES): Change all-cvs to all-cvssrc.
1149 (CROSS_CHECK_MODULES): Change check-cvs to check-cvssrc.
1150 (INSTALL_MODULES): Change install-cvs to install-cvssrc.
1151 (CLEAN_MODULES): Change clean-cvs to clean-cvssrc.
1152 (all-cvssrc): Rename target from all-cvs.
1156 * configure (gxx_include_dir): Fix thinko.
1160 * Makefile.in (INSTALL_TARGET_CROSS): Define.
1161 (install-cross, install-gcc-cross): New targets.
1165 * configure.in (noconfigdirs): Add support for Thumb target.
1167 * config.sub (maybe_os): Add support for Thumb target.
1171 * Makefile.in: Add rules for cygmon.
1173 * configure.in: Build cygmon for sparc-elf and sparclite-aout.
1177 * Makefile.in (INSTALL_TARGET): Do install-gcc first.
1178 * configure (gxx_include_dir): Provide a definition for subdirs
1179 which do not use autoconf.
1183 * Makefile.in, configure, configure.in, ChangeLog: merge with foundry's
1189 * config.guess (powerpc*-*-linux): Handle glibc2 beta release
1190 found on RedHat Linux systems.
1194 * config.guess (alpha stuff): Merge with FSF to avoid incorrect
1199 * configure.in (i[3456]86-ncr-sysv4.3*): Tweak.
1203 * ltmain.sh: If mkdir fails, check whether the directory was created
1204 anyhow by some other process.
1208 * configure.in (d30v-*-*): Configure all directories.
1212 * configure.in (d30v-*-*): Configure newlib, libiberty directories
1217 * configure.in (d30v-*-*): Configure target-libgloss on the D30V.
1221 * include/libiberty.h: Add extern "C" { so it can be used with C++
1223 * include/remote-sim.h: Add extern "C" { so it can be used with C++
1228 * configure.in (d30v-*-*): Configure GCC now.
1232 * configure.in: Remove a "second pass" of tweaking noconfigdirs,
1233 is no longer needed.
1237 * Makefile.in: check-target-libio depends on all-target-libstdc++.
1241 * Makefile.in (bootstrap-lean): Combined with `normal' bootstrap
1242 targets using "$@" to provide support for similar but not identical
1243 targets without having to duplicate code.
1247 * makefile.vms: Fix to work with DEC C.
1251 * config.sub: Add mips-tx39-elf to marketing names.
1255 * ltmain.sh: Handle symlinks in generated script.
1259 * configure: Handle autoconf style directory options: --bindir,
1260 --datadir, --includedir, --infodir, --libdir, --libexecdir,
1261 --mandir, --oldincludedir, --sbindir, --sharedstatedir,
1263 * Makefile.in (sbindir, libexecdir, sysconfdir): New variables.
1264 (sharedstatedir, localstatedir, oldincludedir): New variables.
1265 (BASE_FLAGS_TO_PASS): Pass down bindir, datadir, includedir,
1266 infodir, libdir, libexecdir, localstatedir, mandir, oldincludedir,
1267 sbindir, sharedstatedir, and sysconfdir.
1271 * Makefile.in (bootstrap-lean): New target.
1275 * configure.in (d30v): Remove tcl, tk, expect, gdb, itcl, tix, db,
1276 sn, and gnuserv from noconfigdirs.
1280 * ltmain.sh: Tweak shell pattern to avoid bug in NetBSD /bin/sh.
1284 * Makefile.in (cross): New target.
1289 * Makefile.in (bootstrap2, bootstrap3): New targets.
1290 (all-bootstrap): Remove outdated and confusing target.
1291 (bootstrap, bootstrap2, bootstrap3): Don't pass BOOT_CFLAGS down.
1296 * config/mt-linux: Define CXXFLAGS to make sure -fvtable-thunks is
1298 * configure.in: Name Linux target fragment.
1300 * configure: Rewrite so that project Makefile fragment is inserted
1301 first and appears last in the resulting Makefile.
1305 * Makefile.in (install-itcl): Install tcl first.
1309 * config/mh-cygwin32: ok to build split texinfo files
1313 * configure.in: remove bison from noconfigdirs for Cygwin32 host
1317 * Makefile.in (local-distclean): Also remove mh-frag mt-frag.
1319 * configure.in (skipdirs): Add target-librx for Linux.
1320 (alpha-*-linux*): Use config/mh-elfalphapic and config/mt-elfalphapic.
1324 * Makefile.in (bootstrap): New target.
1328 * config.sub: Accept 'amigados' for backward compatability.
1332 * config.guess: Merge with FSF.
1336 * config.sub: Add "marketing-names" patch.
1340 * configure.in (*-*-rtems*): Do not build libgloss for rtems.
1344 * config.sub: Handle v850-elf.
1348 * ltconfig: Set CONFIG_SHELL in libtool.
1349 * ltmain.sh: Use CONFIG_SHELL instead of /bin/sh
1353 * configure.in (target_subdir): Set to libraries if enable_multilib.
1357 * config.guess: Update from gcc directory.
1361 * Makefile.in (all-sim): Depends on all-readline.
1365 * Makefile.in (BISON, YACC): Use $$s.
1366 (all-bison): Depend on all-texinfo.
1370 * Makefile.in (BISON): Add -L flag.
1375 * configure.in (noconfigdirs): Add support for v850e target.
1377 * config.sub (maybe_os): Add support for v850e target.
1381 * configure.in (noconfigdirs): Add support for v850ea target.
1383 * config.sub (maybe_os): Add support for v850ea target.
1387 * config.sub: Add mipstx39. Delete r3900.
1391 * Makefile.in (all-autoconf): Depends on all-texinfo.
1395 * config-ml.in ({powerpc,rs6000}*-*-*): Update to current AIX and
1400 * configure: Get CFLAGS and CXXFLAGS from Makefile, if possible.
1402 * configure: When handling a Canadian Cross, handle YACC as well as
1403 BISON. Just set BISON to bison. When setting YACC, prefer bison.
1404 * Makefile.in (all-bison): Depend upon all-texinfo.
1408 * Makefile.in (BISON): bison, not byacc or bison -y.
1409 (YACC): bison -y or byacc or yacc.
1410 (various): Add *-bison as appropriate.
1411 (taz): No need to mess with BISON anymore.
1415 * configure: If OSTYPE matches *win32*, try to find a good value for
1420 * Makefile.in (taz): Get the version number from AM_INIT_AUTOMAKE in
1421 configure.in if it is present.
1425 * Makefile.in (LD_FOR_TARGET): Change ld.new to ld-new.
1429 * config.sub: Recognize `arc' cpu.
1430 * configure.in: Likewise.
1431 * config-ml.in: Likewise.
1435 * Makefile.in ($(INSTALL_X11_MODULES)): Depend upon installdirs.
1439 * configure: Changed sed delimiter from ':' to '|' when
1440 attempting to substitute ${config_shell} for SHELL. On
1441 NT ${config_shell} may contain a ':' in it.
1445 * Makefile.in (EXTRA_GCC_FLAGS): Fix for non-bash shells.
1449 * Makefile.in (AS_FOR_TARGET): Change as.new to as-new.
1453 * Makefile.in (NM_FOR_TARGET): Change nm.new to nm-new.
1455 * ylwrap: If the program is a relative path, force it to be
1460 * configure (tooldir): Set BISON to `bison -y' and not just bison.
1464 * Makefile.in (CC_FOR_TARGET): When winsup/Makefile present,
1465 correctly specify the target build directory $(TARGET_SUBDIR)/winsup
1470 * Makefile.in (EXTRA_GCC_FLAGS): Fix handling of macros with values
1471 separated by spaces.
1476 * Makefile.in (DEVO_SUPPORT): Add ylwrap.
1478 * ltmain.sh: Handle /bin/sh at start of install program.
1480 * Makefile.in (DEVO_SUPPORT): Add ltconfig, ltmain.sh, and missing.
1482 * ltconfig, ltmain.sh: New files, from libtool 1.0.
1483 * missing: New file, from automake 1.2.
1487 * Makefile.in: Treat tix like tk, putting it in X11_MODULES. Add
1488 check-tk to CHECK_X11_MODULES.
1492 * config.sub: Merge with FSF.
1496 * config.guess: Merge with FSF.
1500 * configure: Treat msdosdjgpp like go32.
1501 * configure.in: Likewise. Don't remove gprof for go32.
1503 * configure: Change Makefile.tem2 to Makefile.tm2.
1507 * configure.in (noconfigdirs): For alpha-dec-osf*, don't ignore grep.
1511 * install-sh (chmodcmd): Set to null if the DST directory already
1512 exists. Same as Nov 11th change.
1516 * configure (GDB_TK): Needs itcl and tix.
1520 * config.guess: Update from FSF.
1524 * Makefile.in (GDB_TK): Depend on itcl and tix.
1528 * Makefile.in (INSTALL_PROGRAM_ARGS): New variable.
1529 (INSTALL_PROGRAM): Use $(INSTALL_PROGRAM_ARGS).
1530 (INSTALL_SCRIPT): New variable.
1531 (BASE_FLAGS_TO_PASS): Pass down INSTALL_SCRIPT.
1532 * configure.in: If host is *-*-cygwin32*, set INSTALL_PROGRAM_ARGS
1534 * install-sh: Add support for -x option.
1538 * configure.in, Makefile.in: Treat tix like itcl.
1542 * Makefile.in (WINDRES): New variable.
1543 (WINDRES_FOR_TARGET): New variable.
1544 (BASE_FLAGS_TO_PASS): Add WINDRES_FOR_TARGET.
1545 (EXTRA_HOST_FLAGS): Add WINDRES.
1546 (EXTRA_TARGET_FLAGS): Add WINDRES.
1547 (EXTRA_GCC_FLAGS): Add WINDRES.
1548 ($(DO_X)): Pass down WINDRES.
1549 ($(CONFIGURE_TARGET_MODULES)): Set WINDRES when configuring.
1550 * configure: Treat WINDRES like DLLTOOL, and WINDRES_FOR_TARGET like
1555 * configure.in: configure sim before gdb for win32-x-ppc
1559 Move gperf into the toplevel, from libg++.
1560 * configure.in (target_tools): Add target-gperf.
1561 (native_only): Add target-gperf.
1562 * Makefile.in (all-target-gperf): New target, depend on
1564 (configure-target-gperf): Empty rule.
1565 (ALL_TARGET_MODULES): Add all-target-gperf.
1566 (CONFIGURE_TARGET_MODULES): Add configure-target-gperf.
1567 (CHECK_TARGET_MODULES): Add check-target-gperf.
1568 (INSTALL_TARGET_MODULES): Add install-target-gperf.
1569 (CLEAN_TARGET_MODULES): Add clean-target-gperf.
1573 * config.sub (mn10200): Recognize new basic machine.
1577 * configure.in: Don't set ENABLE_MULTILIB, so we'll be passing
1578 --enable-multilib down to subdirs; setting TARGET_SUBDIR was enough.
1582 * configure.in: If we're building mips-sgi-irix6* native, turn on
1583 ENABLE_MULTILIB and set TARGET_SUBDIR.
1587 * Makefile.in (all-sn): Depend on all-grep.
1591 * configure.in: Use mh-ppcpic and mt-ppcpic for powerpc*-* targets.
1593 * configure: Set CFLAGS and CXXFLAGS, and substitute them into
1595 * Makefile.in: Add comment for CFLAGS and CXXFLAGS.
1597 * Makefile.in (DISTBISONFILES): Remove.
1598 (taz): Don't futz with DISTBISONFILES. Change BISON to use
1601 * configure.in: Build itl, db, sn, etc., when building for native
1604 * Makefile.in (LD): New variable.
1605 (EXTRA_HOST_FLAGS): Pass down LD.
1606 ($(DO_X)): Likewise.
1610 * Makefile.in (INSTALL): Use $(SHELL) when executing install-sh.
1614 * configure.in (targargs): Strip out any supplied --build argument
1615 before adding our own. Always add --build.
1619 * configure.in (targargs): Pass --build if we're doing
1624 * configure: Use '|' instead of ":" as the seperator in
1625 sed. Otherwise sed chokes on NT path names with drive
1626 designators. Also look for "?:*" as the leading characters in an
1631 * config.sub: Support for r3900.
1635 * configure.in: Use install-sh, not install.sh.
1639 * Makefile.in (taz): Improve check for BISON so it doesn't try to
1644 * Makefile.in (INSTALL_MODULES): Put install-opcodes before
1649 * Makefile.in: Add automake targets.
1650 * configure.in (host_tools): Add automake.
1654 * configure: Default CXX to c++, not gcc.
1655 * Makefile.in (CXX): Set to c++, not gcc.
1656 (CXX_FOR_TARGET): When cross, transform c++, not gcc.
1660 * install-sh: try appending a .exe if source file doesn't
1665 * configure.in: Turn on multilib by default.
1666 (cross_only): Remove target-libiberty.
1668 * Makefile.in (all-gcc): Don't depend on libiberty.
1672 * config.guess: improve algorithm for recognizing Gnu Hurd x86.
1676 * Makefile.in (DEVO_SUPPORT): Add mpw-install.
1677 (DISTBISONFILES): Add ld/Makefile.in
1681 * configure.in: if target is cygwin32 but host isn't cygwin32,
1682 don't configure gdb tcl tk expect, not just gdb.
1686 * configure.in: Added gnuserv everywhere sn appears.
1688 * Makefile.in (ALL_MODULES): Added all-gnuserv.
1689 (CROSS_CHECK_MODULES): Added check-gnuserv.
1690 (INSTALL_MODULES): Added install-gnuserv.
1691 (CLEAN_MODULES): Added clean-gnuserv.
1692 (all-gnuserv): New target.
1696 * config.guess: Fixes for MIPS OpenBSD systems.
1700 * Makefile.in (INSTALL_XFORM): Remove.
1701 (BASE_FLAGS_TO_PASS): Remove INSTALL_XFORM.
1703 * mkinstalldirs: New file, copied from automake.
1704 * Makefile.in (installdirs): Rename from install-dirs. Use
1705 mkinstalldirs. Change all users.
1706 (DEVO_SUPPORT): Add mkinstalldirs.
1710 * install-sh: Rename from install.sh.
1711 * Makefile.in (INSTALL): Change install.sh to install-sh.
1712 (DEVO_SUPPORT): Likewise.
1714 * configure: Use ${config_shell} with ${moveifchange}. From Thomas
1719 * config.guess: Recognize OpenBSD systems correctly.
1723 * README, Makefile.in (ETC_SUPPORT): Remove references to
1724 cfg-paper*, configure.{texi,man,info*}._
1728 * Makefile.in (all.normal): Ensure that gcc is built after all
1729 the x11 - ie gdb - targets.
1733 * makefile.vms: Don't run conf-a-gas.
1737 * configure.in (hppa1.1-*-rtems*): New target, like hppa-*-*elf*.
1741 * configure.in: Remove noconfigdirs case since gdb also
1742 configures and builds for tic80-coff.
1746 * configure: Set cache_file to config.cache.
1747 * Makefile.in (local-distclean): Remove config.cache.
1751 * COPYING: Update FSF address.
1755 * configure.in (tic80-*-*): Remove G++ libraries and libgloss from
1760 * Makefile.in (install-dirs): Don't crash if prefix, and hence
1765 * config.sub: Tweak mn10300 entry.
1769 * configure.in (host_tools): Put sim before gdb, so gdb's
1770 configure.tgt can determine if the simulator was configured.
1774 * config.sub: Move BeOS $os case to be with other Cygnus
1779 * config.sub: Remove misplaced comment that broke Linux.
1783 * config.sub: Add BeOS support.
1787 * Makefile.in (CHECK_X11_MODULES): Don't run check-tk.
1791 * configure.in (noconfigdirs): Remove tcl and tk from
1792 noconfigdirs for cygwin32 builds.
1796 * configure.in (tic80-*-*): Remove ld from noconfigdirs.
1800 * Makefile.in (GAS_SUPPORT_DIRS, BINUTILS_SUPPORT_DIRS): Remove
1801 make-all.com, use makefile.vms instead.
1805 * config.sub: Accept -lnews*.
1809 * configure.in (noconfigdirs): Disable target-newlib,
1810 target-examples and target-libiberty for d30v.
1814 * configure.in (noconfigdirs): Enable ld for d30v.
1818 * configure.in (tic80-*-*): Build compiler.
1822 * configure.in (d30v-*): Remove sim directory from list of
1823 unsupported d30v directories
1827 * config.sub, configure.in: Add d30v target cpu.
1831 * makefile.vms: New file.
1832 * make-all.com: Remove.
1836 * Makefile.in (EXTRA_GCC_FLAGS): Add LIBGCC2_DEBUG_CFLAGS.
1840 * Makefile.in (all-itcl): The rule is all-itcl, not all-tcl.
1844 * Makefile.in (ALL_MODULES): Added all-db.
1845 (CROSS_CHECK_MODULES): Addec check-db.
1846 (INSTALL_MODULES): Added install-db.
1847 (CLEAN_MODULES): Added clean-db.
1851 * config.guess: Merge with latest FSF sources.
1855 * Makefile.in (ALL_MODULES): Added all-itcl.
1856 (CROSS_CHECK_MODULES): Added check-itcl.
1857 (INSTALL_MODULES): Added install-itcl.
1858 (CLEAN_MODULES): Added clean-itcl.
1862 * configure.in: build gdb for mn10200
1866 * Makefile.in (all-target-winsup): Depend on all-target-libio.
1870 * configure.in (tic80-*-*): Turn off most targets right now.
1874 * Makefile.in (MAKEINFO): Check for the existence of the Makefile,
1875 rather than the makeinfo program.
1876 (do-info): Depend upon all-texinfo.
1880 * configure.in: Remove uses of config/mh-linux.
1882 * config.sub, config.guess: Merge with latest FSF sources.
1886 * config.sub (case $basic_machine): Add tic80 entries.
1890 * config.sub, config.guess: Merge with latest FSF sources.
1894 * mpw-build.in: Build ld before gcc, use NewFolderRecursive.
1895 * mpw-config.in: Test for NewFolderRecursive.
1896 * mpw-install: Use symbolic name for startup filename.
1897 * mpw-README: Add various additional details.
1901 * configure.in (mips*-sgi-irix6*): Remove binutils from noconfigdirs.
1905 * configure.in: Do build gcc and the target libraries for
1910 * configure.in: don't avoid building gdb for mn10300 any more
1911 * Makefile.in: double-quote GCC_FOR_TARGET line in EXTRA_GCC_FLAGS
1912 instead of single-quoting it.
1916 * configure.in: Don't use --with-stabs on IRIX 6.
1920 * configure.in (m32r): Build gdb, libg++ now.
1924 * configure.in (mips*-sgi-irix6*): Remove gdb and related
1925 directories from noconfigdirs.
1929 * config.sub (basic_machine): added mips16 configuration
1933 * config.sub: Handle d10v-unknown.
1937 * config.sub: Handle v850-unknown.
1941 * Makefile.in: add findutils
1942 * configure.in: add findutils to list of host_tools
1946 * config.sub: Handle mn10200 and mn10300.
1950 * configure.in (d10v-*): Do not build librx.
1954 * configure.in (mn10300): Build everything except gdb & libgloss.
1958 * config.guess: Patch for Dansk Data Elektronik servers,
1961 For ncr, use /bin/uname rather than uname, since GNU uname does not
1964 Patch for MIPS R4000 running System V,
1967 Fix thinko for nextstep.
1972 * config.guess: Guess mips-dec-mach_bsd4.3.
1975 * config.guess (i?86-ncr-sysv*): Emit just enough of the minor
1977 * config.guess (mips-mips-riscos*): Emit just enough of the
1981 * config.guess (sparc-auspex-sunos*): Added.
1982 (f300-fujitsu-*): Added.
1985 * config.guess: Recognize a Tadpole as a sparc.
1989 * config.guess: Don't assume that NextStep version is either 2 or
1990 3. NextStep 4 (aka OpenStep 4) has come out now.
1994 * config.guess: Support Cray T90 that reports itself as "CRAY TS".
1999 * config.sub: Contributions from bug-gnu-utils to:
2000 Support plain "hppa" (no version given) architecture, reported by
2002 OpenBSD like NetBSD.
2003 LynxOs is not a hardware supplier.
2005 * config.guess: Contributions from bug-gnu-utils to add support for:
2006 OpenBSD like NetBSD.
2008 More Pyramid systems.
2009 i[n>4]86 Intel chips.
2010 M680[n>4]0 Motorola chips.
2011 Use unknown instead of lynx for hardware manufacturer.
2015 * install.sh (chmodcmd): Set to null if the DST directory already
2020 * configure.in (powerpc*-{eabi,elf,linux,rtem,sysv,solaris}*): Do
2021 not use mt-ppc target Makefile fragment any more.
2025 * configure.in (*-*-windows): Exclude everything but those dirs
2026 needed to build windows.
2030 * Makefile.in (all-target-winsup): Depend on all-target-librx.
2034 * configure.in: Exclude mmalloc from i386-windows.
2035 * config/mh-windows: Add rules for building MSVC makefiles.
2039 * Undo my previous change.
2043 * Makefile.in (EXTRA_GCC_FLAGS): Pass down GCC_FOR_TARGET
2045 (MAKEOVERRIDES): Define (revert this part of October 18 change).
2049 * Makefile.in (FLAGS_TO_PASS): Add $(HOST_FLAGS) to allow the
2050 host to add it's own flags.
2051 * config/mh-windows (HOST_FLAGS): Set srcroot, which is needed
2052 for MSVC build procedure.
2056 * configure: Handle GCC_FOR_TARGET like CC_FOR_TARGET.
2060 * Makefile.in (CC_FOR_TARGET): Check for xgcc, not Makefile.
2061 (CXX_FOR_TARGET): Likewise.
2062 (GCC_FOR_TARGET): Define.
2063 (BASE_FLAGS_TO_PASS): Remove GCC_FOR_TARGET.
2064 (EXTRA_GCC_FLAGS): Define GCC_FOR_TARGET based on whether
2065 CC_FOR_TARGET was specified on the command line.
2066 (MAKEOVERRIDES): Don't define.
2070 * configure.in (m32r): Fix spelling of libg++ libs.
2074 * config.sub (-apple*): Remove, now redundant.
2078 * configure: Don't get confused by CPU-VENDOR-linux-gnu.
2080 * configure: Rework yesterday's sed script patch.
2082 * config.sub: Merge with FSF.
2086 * config.guess: Merge from FSF.
2089 * config.guess: Use pc instead of unknown, for pc clone systems.
2090 Change linux to linux-gnu.
2093 * config.guess: Avoid non-portable tr syntax.
2097 * test-build.mk (HOLES): Add "xargs" for gdb.
2099 * configure: Avoid hpux10.20 sed bug.
2103 * configure.in config/mh-windows: Add support for windows host
2104 (that is a build done under the Microsoft build environment).
2108 * Makefile.in: Replace all uses of srcroot with s, to shrink
2109 command line lengths.
2112 * configure.in: If configuring for newlib, pass --with-newlib to
2114 * Makefile.in (CC_FOR_TARGET): If winsup/Makefile exists, pass a
2115 -Bnewlib/ and -Lwinsup to gcc.
2116 (CXX_FOR_TARGET): Likewise.
2120 * Makefile.in (ETC_SUPPORT): Add configure.
2124 * configure.in: Use config/mh-dgux386 for i[345]86-dg-dgux
2125 host configuration file.
2129 * configure.in: Break mn10x00 support into separate
2130 mn10200 and mn10300 configurations.
2131 * config.sub: Likewise.
2135 * configure.in: Add lots of stuff to noconfigdirs for
2136 the mn10x00 targets.
2138 * config.sub, configure.in: Add mn10x00 support.
2142 * make-all.com: Call conf-a-gas, not config-a-gas.
2146 * configure.in (noconfigdirs): Don't build libgloss for arm-coff
2151 * mpw-README: Add much more detail for native PowerMac.
2152 * mpw-install: New file.
2153 * mpw-configure: Add --norecursion and --help options.
2154 * mpw-config.in: Translate readme and install files when
2156 * mpw-build.in: Don't always depend on byacc and flex.
2157 (install-only-top): New action.
2161 * configure.in: You can now configure GDB for the v850.
2165 * configure.in (noconfigdirs): Don't configure any C++ dirs
2170 * config.sub: Recognize mips64vr5000.
2174 * configure.in: Use a single line for host_tools and native_only.
2178 * config.sub, configure.in: Add entries for m32r.
2182 * Makefile.in (inet-install): Don't run install-gzip.
2186 * configure.in: Don't config lots of things for *-*-windows*.
2190 * mpw-config.in: Test for mpw-true, true, and null-command scripts.
2191 (host_libs, host_tools): Copy from configure.in.
2192 * mpw-configure: Don't complain about directories not found.
2196 * configure.in (i[345]86): Recognize i686 for pentium pro.
2197 (i[3456]86-*-dgux*): Use config/mh-sysv for the host configuration
2200 * config.guess (i[345]86): Ditto.
2204 * configure.in (noconfigdirs): Removed gdb for D10V.
2208 * configure.in: Remove ld, target-libio, target-libg++, and
2209 target-libstdc++ from noconfigdirs.
2213 * configure: Fix three locations where shell scripts were
2214 being run directly rather than with config_shell.
2218 * configure.in (v850-*-*): Set up initial $noconfigdirs.
2219 * config.sub (basic_machine): Recognize v850.
2223 * mpw-configure: Handle multiple enable/disable options and
2224 pass them down recursively, handle -c and -s flags appropriately
2225 depending on choice of compiler, add escape mechanism for
2226 quoted arguments to gC.
2230 * configure.in (powerpc*-*-*): For eabi, system V.4, Linux, and
2231 solaris targets, use config/mt-ppc to set C{,XX}FLAGS_FOR_TARGETS
2232 so that -mrelocatable-lib and -mno-eabi are used.
2234 * Makefile.in (CONFIGURE_TARGET_MODULES): If target compiler does
2235 not support --print-multi-lib, don't abort.
2239 * config/mh-cygwin32 (CFLAGS): Define _WIN32 to be compatible
2240 with normal Windows compilation environment.
2244 * make-all.com: Run config-a-gas.
2245 * setup.com: Don't copy subdirectory files around.
2249 * configure.in (*-*-ose): Remove exclusion of libgloss for this
2250 target, it now compiles correctly.
2254 * mpw-config.in: Generate Mac include for elf/dwarf2.h.
2258 * configure.in (d10v-*-*): Remove ld from $noconfigdirs.
2262 * configure.in (native_only): Add prms.
2266 * Makefile.in (GAS_SUPPORT_DIRS): Add make-all.com and setup.com.
2267 (BINUTILS_SUPPORT_DIRS): Likewise.
2271 * configure.in (d10v-*-*): Don't configure ld or gdb until the
2272 d10v support is added.
2276 * configure.in (d10v-*-*): New target.
2280 * config.guess (HP 9000/811): Recognize this as a PA1.1
2285 * Makefile.in (do-tar-gz): New target, split out from tail end of
2286 taz target. Run each command separately, don't use pipes.
2291 * mpw-configure: Look for g-mpw-make.sed in config/mpw.
2292 * mpw-build.in: No builds should depend on building byacc or flex,
2293 they are assumed to be installed already.
2297 * Makefile.in (CONFIGURE_TARGET_MODULES): Set r environment
2298 variable that CC_FOR_TARGET needs.
2302 * Makefile.in (CONFIGURE_TARGET_MODULES): Determine if the multlib
2303 options have changed since the last time the subdirectory was
2304 configured, and if it has, reconfigure.
2305 (CLEAN_TARGET_MODULES): Delete multilib.out and tmpmulti.out, which
2306 CONFIGURE_TARGET_MODULES uses to remember the old multilib options.
2310 * Makefile.in (ALL_MODULES,CROSS_CHECK_MODULES,INSTALL_MODULES,
2311 CLEAN_MODULES): Add bash.
2312 (all-bash): New target.
2316 * configure.in (mips-sgi-irix6*): Use mh-irix6 instead of mh-irix5.
2320 * config.sub (basic_machine): Recognize d10v as a valid processor.
2324 * mpw-configure: Add support for --bindir.
2325 * mpw-build.in: Use a GCC-specific build script for GCC actions.
2329 * configure.in: add bash, time, gawk to list of hosttools and things
2330 to only build for native toolchains
2334 * Makefile.in (docdir): Remove.
2338 * Makefile.in (datadir): Set to $(prefix)/share.
2342 * configure.in: build diff and patch for cygwin32-hosted
2347 * config.sub: Accept -rtems*.
2351 * configure.in: enable dosrel for cygwin32-hosted builds,
2352 remove diff from the list of things not buildable
2357 * Makefile.in (TARGET_SUBDIR): Move comment to previous line so we
2362 * configure.in (mips*-sgi-irix6*): Set noconfigdirs appropriately.
2366 * Makefile.in (taz): Handle case where tex3patch didn't even get
2367 checked out. Also, if it was found, put the symlink in a new util
2372 * config.guess (*:Linux:*:*): Add support for PowerPC Linux.
2376 * config.sub: Recognize -openvms.
2377 * configure.in (alpha*-*-*vms*): Set noconfigdirs.
2378 * make-all.com, setup.com: New files.
2382 * Makefile.in (taz): tex3patch moved to texinfo/util.
2386 * configure.in: remove make from disable-if-Can-Cross list
2387 enable gdb if ${host} and ${target} are cygwin32
2391 * config.guess (i?86-ncr-sysv*): Emit minor release numbers.
2392 Recognize the NCR 4850 machine and NCR Pentium-based platforms.
2396 * config.guess: Combine mips-mips-riscos cases, and use cpp to
2397 distinguish sysv/svr4/bsd variants.
2402 * configure.in: Added copyright notice.
2403 * move-if-change: Added copyright notice.
2407 * configure.in (powerpcle-*-solaris*): Until we get shared
2408 libraries working, don't build gdb, sim, make, tcl, tk, or
2413 * config.guess: Merge with FSF:
2416 * config.guess (*:Linux:*:*): Add guess for sparc-unknown-linux.
2419 * config.guess (AViiON:dgux:*:*): Fix typo in recognizing mc88110.
2422 * config.guess: Combine two OSF1 rules.
2424 * config.guess (dgux): Use /usr/bin/uname rather than uname,
2429 * Makefile.in (MAKEDIRS): Removed $(tooldir).
2433 * mpw-README: Document GCCIncludes.
2437 * configure.in (alpha-*-linux*): Set enable_shared to yes.
2441 * mpw-configure: Handle --enable-FOO and --disable-FOO.
2445 * configure.in (*-*-cygwin32): Configure make.
2449 * Makefile.in (inet-install): Quote value of INSTALL_MODULES.
2453 * Makefile.in (all-inet): Depend on all-perl.
2455 * Makefile.in (inet-install): New target.
2457 * Makefile.in (all-inet): Depend on all-tcl.
2458 (all-inet): Depend on all-send-pr.
2462 * configure.in (powerpcle-*-solaris*): Turn off tk and tcl
2467 * configure.in: Don't configure --with-gnu-ld on AIX.
2471 * configure.in (powerpcle-*-solaris*): Turn off gdb temporarily.
2475 * Makefile.in (ALL_MODULES): Added all-inet.
2476 (CROSS_CHECK_MODULES): Added check-inet.
2477 (INSTALL_MODULES): Added install-inet.
2478 (CLEAN_MODULES): Added clean-inet.
2479 (all-indent): New target.
2481 * configure.in (host_tools): Added inet.
2482 (native_only): Added inet.
2483 (noconfigdirs): Added inet.
2487 * configure.in: Don't configure libgloss if we are not configuring
2492 * configure.in: Don't configure libgloss for unsupported
2497 * Makefile.in (CLEAN_MODULES): Add clean-apache.
2501 * Makefile.in (ALL_MODULES): Include all-apache.
2502 (CROSS_CHECK_MODULES): Include check-apache.
2503 (INSTALL_MODULES): Include install-apache.
2504 (all-apache): New target.
2506 * configure.in: Added apache everywhere perl is seen.
2510 * Makefile.in: Add support for clean-{module} and
2511 clean-target-{module} rules.
2515 * configure.in (*-*-ose) do not build libgloss.
2519 * config.guess (prep*:SunOS:5.*:*): Turn into
2520 powerpele-unknown-solaris2.
2524 * configure.in: Permit --enable-shared to specify a list of
2529 * configure.in (host==solaris): Pass only the first word of $CC
2530 to /usr/bin/which when checking if we're using /usr/ccs/bin/cc.
2534 * Makefile.in (BASE_FLAGS_TO_PASS): pass down $(MAKE).
2538 * Makefile.in (ALL_MODULES): Include all-perl.
2539 (CROSS_CHECK_MODULES): Include check-perl.
2540 (INSTALL_MODULES): Include install-perl.
2541 (ALL_X11_MODULES): Include all-guile.
2542 (CHECK_X11_MODULES): Include check-guile.
2543 (INSTALL_X11_MODULES): Include install-guile.
2544 (all-perl): New target.
2545 (all-guile): New target.
2547 * configure.in (host_tools): Include perl and guile.
2548 (native_only): Include perl and guile.
2549 (noconfigdirs): Don't build guile and perl; no ports have been
2554 * configure (--enable-*): Handle quoted option lists such as
2555 --enable-sim-cflags='-g0 -O' better.
2559 * Makefile.in ({,inst}all-target): New rule so we can make and
2560 install all of the target directories easily.
2564 * configure.in: Add missing global flag in sed substitution when
2565 deleting `target-' from ${configdirs}.
2569 * Makefile.in (DO_X): Don't get confused if CC contains `=' in an
2572 * configure.in (mips*-nec-sysvr4*): Use a host_makefile_frag of
2575 * install.sh: Correct misspelling of transformbasename.
2577 * config.guess: Recognize mips-*-sysv*.
2581 * config.sub: Recognize mon960.
2585 * configure: Restore Canadian Cross handling of BISON and LEX,
2586 removed in Feb 20 change.
2591 Mention make install. Remove the old copyright date as well the
2592 clumsy and rather pointless copyright on the README file.
2596 * Makefile.in ($(CONFIGURE_TARGET_MODULES)): If there is a
2597 Makefile after running symlink-tree, then run `make distclean' to
2598 avoid clobbering any generated files in srcdir.
2602 * configure.in (m68k-*-netbsd*): Build everything now.
2606 * Makefile.in (taz): Fix quoting.
2610 * configure.in (sparclet-*-*): Build everything now.
2614 * configure.in (m68k-*-linux*): New host.
2618 * configure: Check for bison before byacc.
2622 * Makefile.in configure: Change the way LEX and BISON/YACC are
2623 set. configure now defines DEFAULT_LEX and DEFAULT_YACC by
2624 searching PATH. These are used as fallbacks by Makefile.in if
2625 flex/bison/byacc aren't in objdir.
2629 * Makefile.in: Make everything which depends upon all-bfd also
2630 depend upon all-opcodes, in case --with-commonbfdlib is used.
2634 * configure.in (host *-*-cygwin32): Don't build gdb if we are
2635 building NT native compilers on Unix.
2639 * configure.in: Don't get CC from the host Makefile fragment if we
2640 can find gcc in PATH, or if this is a Canadian Cross. Move the
2641 Solaris test for /usr/ucb/cc to the post target script, just after
2642 the compiler sanity test.
2646 * config.sub: Merge with FSF.
2650 * Makefile.in (RPATH_ENVVAR): New variable.
2651 (REALLY_SET_LIB_PATH): Use it.
2652 * configure.in: On HP/UX, set RPATH_ENVVAR to SHLIB_PATH.
2656 * config.sub, configure.in: Recognize sparclet cpu.
2660 * config.guess: Support m68k-cbm-sysv4.
2664 * config.guess (*:Linux:*:*): Guess m68k-unknown-linux and
2665 m68k-unknown-linuxaout from linker help string. Put quotes around
2670 * config.guess (powerpc-harris-powerunix): Add guess for port
2675 * config.guess (UNAME_VERSION): Recognize X4.x as an OSF version.
2679 * configure.in: If --enable-shared was used, set SET_LIB_PATH to
2680 $(REALLY_SET_LIB_PATH) in Makefile.
2681 * Makefile.in (SET_LIB_PATH): New variable.
2682 (REALLY_SET_LIB_PATH): New variable.
2683 ($(DO_X)): Use $(SET_LIB_PATH).
2684 (install.all, gcc-no-fixedincludes, $(ALL_MODULES)): Likewise.
2685 ($(NATIVE_CHECK_MODULES), $(CROSS_CHECK_MODULES)): Likewise.
2686 ($(INSTALL_MODULES), $(CONFIGURE_TARGET_MODULES)): Likewise.
2687 ($(ALL_TARGET_MODULES), $(CHECK_TARGET_MODULES)): Likewise.
2688 ($(INSTALL_TARGET_MODULES), $(ALL_X11_MODULES)): Likewise.
2689 ($(CHECK_X11_MODULES), $(INSTALL_X11_MODULES)): Likewise.
2690 (all-gcc, all-bootstrap, check-gcc, install-gcc): Likewise.
2691 (install-dosrel): Likewise.
2692 (all-opcodes): Depend upon all-libiberty.
2696 * config.guess (*:CYGWIN*): New
2700 * Makefile.in (all-target-winsup): All all-target-libiberty.
2704 * configure.in (noconfigdirs): Add missing # in front of comment.
2708 * configure.in: add second pass to things added to noconfigdirs
2709 so *-gm-magic can exclude libgloss properly.
2713 * mpw-configure (extralibs_name, rez_name): Set correctly
2714 for MWC68K compiler.
2716 * mpw-README: Add more info on the necessary build tools.
2720 * configure.in, config.sub: Recognize cygwin32.
2724 * config.guess, config.sub: Recognize A/UX.
2728 * config.sub: Merge with gcc/config.sub.
2732 * mpw-build.in (do-binutils): Add build of stamps.
2736 * config.sub: Add recognition for mips64vr4100*-* targets.
2740 * test-build.mk: Add checking of `hpux9' rather than just `hpux'.
2741 Add creation of gconfigargs with `--enable-shared' turned on.
2742 ($(host)-stamp-stage2-configured): Pass $(gconfigargs).
2743 ($(host)-stamp-stage3-configured): Likewise.
2744 (HOLES): Add chatr and ldd.
2745 (i386-ncr-sysv4.3*): Add use of /usr/ccs/bin in the PATH and HOLE_DIRS.
2749 * configure: Pass --nfp to recursive configures.
2753 * Makefile.in (DLLTOOL): New.
2754 (DLLTOOL_FOR_TARGET): New.
2755 (EXTRA_HOST_FLAGS): Pass down DLLTOOL.
2756 (EXTRA_TARGET_FLAGS): Ditto.
2757 (EXTRA_GCC_FLAGS): Ditto.
2758 (CONFIGURE_TARGET_MODULES): Ditto.
2760 * configure: Add DLLTOOL.
2765 * configure.in (i[345]86-*-sco3.2v5*): Use mh-sysv instead of
2766 mh-sco, since old workarounds no longer needed, and don't
2767 build ld, since libraries have weak symbols in COFF.
2771 * Makefile.in (CONFIGURE_TARGET_MODULES): Add missing ';'.
2775 * configure.in: Make sure that ${CC} can be used to compile an
2780 * Makefile.in (newlib.tar.gz): Delete building of newlib's info files.
2784 * configure.in (noconfigdirs): Put ld or gas in this early, if the
2785 user specifically used --with-gnu-ld=no or --with-gnu-as=no.
2789 * config-ml.in: Add support for
2790 --disable-{softfloat,m68881,m68000,m68020} on m68*-*-*.
2791 Simplify setting of multidirs from --disable-foo.
2795 * Makefile.in (EXTRA_GCC_FLAGS): If any of the make variables
2796 LANGUAGES, BOOT_CFLAGS, STMP_FIXPROTO, LIMITS_H_TEST,
2797 LIBGCC1_TEST, LIBGCC2_CFLAGS, LIBGCC2_INCLUDES, and ENQUIRE are
2798 non-empty, pass them on to the GCC make.
2799 (all-bootstrap): New rule that is like all-gcc, except it executes
2800 the GCC bootstrap rule instead of the GCC all rule.
2804 * config-ml.in (ml_realsrcdir): New, to account for ${subdir}.
2808 * config.guess (AViiON:dgux:*:*): Update from FSF to add pentium
2813 * config.sub (i*86*) Change [345] to [3456]
2817 * configure.in (noconfigdirs): Add gas or ld if --with-gnu-as=no or
2822 * config-ml.in (rs6000*, powerpc*): Add switches to control which
2823 AIX multilibs get built.
2827 * configure.in (i386-win32): Don't build expect if we're not
2828 building the tcl subdir.
2832 * Makefile.in: (configure-target-examples, all-target-examples):
2833 New targets, configure and build example programs.
2837 * mpw-configure: If an mpw-config.in generated a file mk.sed,
2838 use it as input to sedit the generated MPW makefile.
2839 * mpw-README: Add a suggestion about Gestalt.h.
2843 * config.sub: Accept *-*-ieee*.
2847 * Makefile.in (local-distclean): Remove $(TARGET_SUBDIR). From
2852 * configure.in (host==powerpc-pe): Add many directories to noconfigdirs
2853 for powerpc-pe native.
2854 (target==i386-win32): add tcl, make to noconfigdirs if canadian cross.
2855 (target==powerpc-pe): duplicate i386-win32 entry.
2859 * configure.in (noconfigdirs): Exclude target-newlib for all versions
2860 of vxworks, not just vxworks5.1.
2864 * mpw-configure: Add support for exec-prefix.
2868 * config.guess: Recognize HP model 816 machines as having
2873 * configure: Ignore new autoconf configure options.
2877 * config/mt-v810 (CC_FOR_TARGET): Add -ansi flag. NEC compiler
2878 defaults to K&R mode, but doesn't have varargs.h, so we have to
2879 compile in ANSI mode.
2883 * config.guess: Recognize Pentium under SCO.
2888 * configure.in (noconfigdirs): Disable target-libio on v810-*-*.
2889 * config/mt-v810 (CC_FOR_TARGET, AS_FOR_TARGET, AR_FOR_TARGET,
2890 RANLIB_FOR_TARGET): Set as appropriate for NEC v810 toolchain.
2894 * configure.in: Don't configure gas for alpha-dec-osf*.
2898 * configure.in: Default to --with-stabs for some targets for which
2899 it makes sense: mips*-*-*, alpha*-*-osf*, i[345]86*-*-sysv4* and
2900 i[345]86*-*-unixware*.
2904 * config-ml.in: Get list of multidirs using gcc --print-multi-lib
2905 rather than basing it on the target. Simplify handling of options
2906 controlling which directories to configure. Remove extraneous
2907 slash in multi-clean target.
2911 * config-ml.in: Prefix more variables with ml_ so they don't collide
2916 * configure: Don't turn -v into --v.
2920 * configure.in (targargs): Fix typo.
2922 * Makefile.in (DEVO_SUPPORT): Add symlink-tree.
2926 * configure.in: Strip --host and --target options from
2927 CONFIG_ARGUMENTS, and always configure for --host only. Add
2928 --with-cross-host option when building with a cross-compiler.
2929 * configure: Canonicalize the arguments put into config.status by
2930 always using `=' for an option with an argument. Pass a presumed
2931 --host or --target explicitly.
2935 * config.sub: Merge -macos*, -magic*, -pe*, and -win32 cases
2936 into general OS recognition case.
2940 * configure.in (target_configdirs): add target-winsup only
2941 for win32 target systems.
2945 * Makefile.in (all-target-libgloss): Depend upon
2946 configure-target-newlib, since when libgloss is built it looks to
2947 see if the newlib directory exists.
2951 * Makefile.in (DEVO_SUPPORT): Use config-ml.in instead of
2956 * configure: Handle LD and LD_FOR_TARGET when configuring a
2961 * config/mh-i386win32: add LD_FOR_TARGET.
2965 * configure.in (target_libs): add target-winsup.
2966 (target==i386-win32): add patch diff flex make to $noconfigdirs.
2967 (target==ppcle-pe): remove ld from $noconfigdirs.
2971 * Makefile.in (CONFIGURE_TARGET_MODULES): Pass --with-target-subdir.
2972 Preserve relative path names in $srcdir. Build symlink tree if
2973 configuring cross target dir and srcdir=. (= no VPATH support).
2974 (configure-target-libg++): Depend on configure-target-librx.
2975 * cfg-ml-com.in, cfg-ml-pos.in: Deleted.
2976 * config-ml.in: New file.
2977 * symlink-tree: New file.
2978 * configure: Ensure srcdir="." if that's what it is.
2982 * mpw-README: Clarify some phrasing, add notes about CodeWarrior
2983 includes and FLEX_SKELETON setting.
2984 * mpw-configure (--with-gnu-ld): New option, controls whether
2985 to use PPCLink or ld with PowerMac GCC.
2986 * mpw-build.in (all-grez, do-grez, install-grez): New targets.
2987 * mpw-config.in: Configure grez if targeting Mac.
2989 * config.sub: Accept pmac and pmac-mpw as names for PowerMacs,
2990 accept mpw and mac-mpw as names for m68k Macs, change macos7 to
2992 * configure.in: Configure grez resource compiler if targeting Mac.
2993 * Makefile.in (all-grez, install-grez): New targets.
2997 * configure: CXX defaults to gcc, not g++. If we find
2998 gcc in the path, set CC to gcc -O2.
3002 * configure: Default ${build} correctly. Avoid picking up extra
3003 spaces when reading CC and CXX from Makefile. When doing a
3004 Canadian Cross, use plausible default values for numerous
3006 * configure.in: When doing a Canadian Cross, don't try to
3007 configure tools whose configure script can't handle it.
3011 * cfg-ml-com.in (sh-*-*): Add m2 and ml/m2 to multidirs.
3015 * configure: Remove dubious bug reporting address.
3019 * Makefile.in ($(CONFIGURE_TARGET_MODULES)): If subdir has
3020 configure script, run that instead of this directory's configure.
3021 In either case, print a message that we're configuring the sub-dir.
3025 * configure.in: Before checking for the existence of various files,
3026 use sed to filter out "target-".
3030 * Makefile.in (DO_X): Split rule to decrease command line length
3032 (Philippe De Muyter).
3036 * Makefile.in (all-patch): depend on all-libiberty.
3040 * configure.in: If the only directory in target_configdirs which
3041 actually exists is libiberty, then set target_configdirs to empty,
3042 to avoid trying to build a target libiberty in a gas or gdb
3047 * configure.in (host_makefile_frag): Use m68k-sun-sunos* instead
3048 of m68k-sun-* when selecting mh-sun3 to avoid matching NetBSD/sun3
3053 * configure.in (copy_dirs): Use sys-include instead of include
3054 for --with-headers option.
3058 * Makefile.in, configure.in: Make winsup builds work with
3063 * configure.in: Build the linker on AIX.
3067 * Makefile.in (CC_FOR_TARGET, CXX_FOR_TARGET): Add $(TARGET_SUBDIR)
3072 * Makefile.in (all-gcc): Fix typo.
3076 * Makefile.in ($(CHECK_TARGET_MODULES)): Fix typo.
3080 * configure.in: Rename libFOO to target-libFOO, and xiberty
3081 to target-xiberty, to provide more flexibility.
3082 (target_subdir): Define. Create if cross.
3083 Set TARGET_SUBDIR in Makefile to ${target_subdir}.
3084 * Makefile.in: Rename all-libFOO -> all-target-libFOO, all-xiberty
3085 -> all-target-libiberty, configure-libFOO -> configure-target-libFOO,
3086 check-libFOO -> check-target-libFOO, etc.
3087 ($(DO_X)): Iterate over TARGET_CONFIGDIRS after SUBDIRS.
3088 ($(CONFIGURE_TARGET_MODULES), $(CHECK_TARGET_MODULES),
3089 $(ALL_TARGET_MODULES), $(INSTALL_TARGET_MODULES)): Update accordingly.
3090 (configure-target-XXX): Depend on $(ALL_GCC), not all-gcc, to
3091 allow ALL_GCC="" to only configure.
3092 (DEVO_SUPPORT): Add cfg-ml-com.in and cfg-ml-pos.in.
3093 (ETC_SUPPORT, ETC_SUPPORT_PFX): Merge; update 'taz' accordingly.
3094 (LIBGXX_SUPPORT_DIRS): Remove xiberty.
3098 * Makefile.in (taz): Build "info" in etc explicitly.
3102 * configure.in: Make sure that CC is undefined (as opposed to
3103 null) if toplevel/config/mh-{host} doesn't define it. Fixes a
3104 problem with autoconf trying to configure on a host without GCC.
3108 * mpw-configure: Set host alias from choice of host compiler,
3109 only use generic MPW Makefile sed if present, edit a file
3110 named "hacked_Makefile.in" instead of "Makefile.in" if present.
3111 * mpw-README: Add problem notes about CW6 and CW7.
3115 * Makefile.in (taz): Use ";" instead of ";;".
3119 * Makefile.in (taz): Grep for '^diststuff:' or '^info:' in
3120 sub-directory Makefiles, instead of using DISTSTUFFDIRS and
3122 (DISTSTUFFDIRS, DISTDOCDIRS): Removed - no longer used.
3123 (newlib.tar.gz): Don't pass DISTDOCDIRS to recursive make.
3127 * Makefile.in (DISTDOCDIRS): Remove ld gprof bnutils gas libg++ gdb
3128 and gnats, because they are now subsumed by DISTSTUFFDIRS.
3129 Move bfd to DISTSTUFFDIRS.
3133 * Makefile.in (X11_LIB): Removed.
3134 (X11_FLAGS_TO_PASS): pass only X11_EXTRA_CFLAGS and X11_EXTRA_LIBS.
3136 * configure.in (host_makefile_frag): mh-aix & mh-sun removed.
3140 * cfg-ml-com.in (powerpc*): Shorten some of the multilib directory
3145 * cfg-ml-com.in (powerpc*-eabi*): Add mcall-aixdesc varients.
3149 * configure.in (i[345]86-*-win32): Always build newlib.
3150 Don't configure cvs, autoconf or texinfo.
3151 * Makefile.in (LD_FOR_TARGET): New.
3152 (BASE_FLAGS_TO_PASS, EXTRA_TARGET_FLAGS, CONFIGURE_TARGET_MODULES):
3153 Pass down LD_FOR_TARGET.
3157 * winsup: New directory.
3158 * Makefile.in: Build winsup.
3159 * configure.in: Winsup is configured when target is win32.
3160 Can only build win32 target GDB when native.
3164 * config.guess: Recognize HP model 819 machines as having
3169 * configure: Fix sed loop which substitutes for CC and CXX to
3170 avoid bug found in various sed implementations.
3174 * cfg-ml-com.in (powerpc-*-eabisim): Delete separate rule for
3175 simulator. Use standard powerpc-*-eabi*.
3179 * configure.in: Stop putting gas and binutils in noconfigdirs for
3180 powerpc-*-aix* and rs6000-*-*.
3184 * cfg-ml-com.in (powerpc*-*-eabisim*): Add support for building
3185 -mcall-aixdesc libraries.
3191 * config.sub (arm | armel | armeb): Fix shell syntax.
3195 * cfg-ml-com.in ({powerpc,rs6000}-ibm-aix*): Add multilibs for
3196 -msoft-float and -mcpu=common support.
3197 (powerpc*-*-eabisim*): Add support for building -mcall-aix
3202 * configure.in: Allow configuration and build of emacs19 for the alpha.
3206 * configure.in (CC): Get ^CC, not just any old CC, from
3207 ${host_makefile_frag}.
3211 * configure.in (CC): Try to get CC from
3212 ${srcdir}/${host_makefile_frag}, not ${host_makefile_frag}.
3216 * Makefile.in (TARGET_CONFIGDIRS): configure targetdirs
3217 only if it exists in $(srcdir).
3221 * configure: If CC and CXX are not set in the environment, set
3222 them, based on either an existing Makefile or on searching for gcc
3223 in PATH. Substitute for CC and CXX in Makefile.
3224 * configure.in: Remove libm from target_libs. Separate
3225 target_configdirs from configdirs. If CC is not set in
3226 environment, try to get it from a host Makefile fragment. Rewrite
3227 changes of configdirs to use skipdirs instead. A few minor
3228 tweaks. Take directories out of target_configdirs as they are
3229 taken out of configdirs. Remove existing Makefile files from
3230 subdirectories. Substitute for TARGET_CONFIGDIRS and
3231 CONFIG_ARGUMENTS in Makefile.
3232 * Makefile.in (TARGET_CONFIGDIRS): New variable, automatically set
3234 (CONFIG_ARGUMENTS): Likewise.
3235 (CONFIGURE_TARGET_MODULES): New variable.
3236 ($(DO_X)): Loop over TARGET_CONFIGDIRS as well as SUBDIRS.
3237 ($(CONFIGURE_TARGET_MODULES)): New target.
3238 (configure-libg++, configure-libio): New targets.
3239 (all-libg++): Depend upon configure-libg++.
3240 (all-libio): Depend upon configure-libio.
3241 (configure-libgloss, all-libgloss): New targets.
3242 (configure-libstdc++): New target.
3243 (all-libstdc++): Depend upon configure-libstdc++.
3244 (configure-librx, all-librx): New targets.
3245 (configure-newlib): New target.
3246 (all-newlib): Depend upon configure-newlib
3247 (configure-xiberty): New target.
3248 (all-xiberty): Depend upon configure-xiberty.
3252 * configure.in (host i[345]86-*-win32): Expand the
3257 * mpw-configure: Fix sed command file name.
3261 * configure.in (host i[345]86-*-win32): Reduce the
3266 * configure.in: Don't configure ld and gdb for powerpc*-*-winnt*
3267 or powerpc*-*-pe*, since they are not yet supported.
3271 Add PowerMac support and many other enhancements.
3272 * mpw-configure: New option --cc to select compiler to use,
3273 paste options set according to --cc into the generated
3274 Makefile, generate the Makefile by sed'ing the Unix Makefile.in
3275 if mpw-make.sed is present.
3276 * mpw-config.in: Don't test for gC1, test for mpw-touch,
3277 add forward includes for PowerPC include files.
3278 * mpw-build.in: Build using Makefile.PPC if present.
3279 (do-byacc, etc): Remove separate version resource builds.
3280 (do-gas): Build "stamps" before "all".
3281 (do-gcc): Build "stamps-h" and "stamps-c" before "all".
3282 * mpw-README: Update to reflect --cc option, PowerMac support,
3283 and recently-reported compatibility problems.
3287 * cfg-ml-com.in (m68*-*-*): Only build multilibs for
3288 embedded m68k systems (-aout, -coff, -elf, -vxworks).
3289 (--with-multilib-top): Pass to recursive invocations.
3293 * configure.in (noconfigdirs): Disable libg++ and libstdc++ on
3298 * configure.in (noconfigdirs): Disable bfd, binutils, gas, gcc,
3299 gdb, ld and opcodes on v810-*-*.
3303 * config/mh-ncrsvr43: Removed AR_FLAGS
3307 * Makefile.in (DO_X): Change do-realclean to do-maintainer-clean.
3308 (local-maintainer-clean): New target.
3309 (maintainer-clean): New target.
3310 (realclean): Just depend upon maintainer-clean.
3314 * configure.in (noconfigdirs): Disable gdb on m68k-*-netbsd*.
3318 * configure.in: Build ld in mips*-*-bsd* case.
3322 * config.sub: Accept -lites* OS. From Ian Dall.
3326 * config.sub: recognise mips64vr4300 and mips64vr4300el as valid
3331 * configure.in: treat i386-win32 canadian cross the same as
3332 i386-go32 canadian cross.
3336 * cfg-ml-com.in (powerpc*-*-eabisim): Add support for PowerPC
3337 running under the simulator to build a reduced set of libraries.
3338 (powerpc-*-eabiaix): Add fine grained multilib support added to
3339 other powerpc targets yesterday.
3343 * cfg-ml-com.in (powerpc*): Add support for -disable-biendian,
3344 -disable-softfloat, -disable-relocatable, -disable-aix, and
3345 -disable-sysv to control which multilib libraries get built.
3349 * configure: Add Makefile.tem to list of files to remove in trap
3354 * config.guess (*Linux*): Add missing "exit"s.
3355 Also, need specific check for alpha-unknown-linux (uses COFF).
3359 * config.guess: Merge with FSF:
3362 * config.guess (AIX4): More robust release numbering discovery.
3365 * config.guess (i386-sequent-ptx): Properly get version number.
3368 * config.guess (mips:*:4*:UMIPS): New case.
3372 * configure.in (i386-go32 host): Fix typo (deja-gnu -> dejagnu).
3373 (i386-win32 host): Likewise. Don't build readline.
3377 * Makefile.in (GDB_SUPPORT_DIRS): Add utils.
3378 (DEVO_SUPPORT): Add mpw-README, mpw-build.in, mpw-config.h and
3383 * configure.in (appdirs): Use =, not ==, in test expression when
3384 trying to build the text to print in the warning message for
3389 * cfg-ml-com.in (z8k-*-coff): Add 'std' multilib build.
3393 * config.guess: Recognize lynx-2.3.
3397 * config.sub (z8ksim): Deleted
3398 (z8k-*-coff): New, this is the one true name of the target.
3402 * cfg-ml-pos.in (dotdot): Work around SunOS sed bug.
3406 * config.guess (*:Linux:*:*): First try asking the linker what the
3407 default object file format is (elf, aout, or coff). Then if this
3408 fails, try previous methods.
3412 * configure.in: Don't build newlib for *-*-vxworks5.1.
3416 * configure.in: Don't build newlib for a29k-*-vxworks5.1.
3417 * test-build.mk: Add setting of --with-headers for a29k-vxworks5.1.
3421 * cfg-ml-pos.in (MULTITOP): Trim excess trailing "/.".
3425 * cfg-ml-com.in: New file.
3426 * cfg-ml-pos.in: New file.
3430 * COPYING.NEWLIB: Add HP free copyright to list.
3434 * config.sub: Recognize -eabi* for the system, not just -eabi.
3438 * Makfile.in (DLLTOOL_FOR_TARGET): New name, pass it down.
3439 * config.sub, configure.in (win32): New target and host.
3443 * configure.in: Add i386-pe configuration.
3447 * mpw-build.in (install): Install GDB after LD.
3451 * mpw-config.in (elf/mips.h): Always forward-include, needed
3456 * testsuite: New directory for customer acceptance and whole tool
3461 * configure: If per-host line isn't found, but AC_OUTPUT is found
3462 and a configure script exists, run it instead.
3466 * config.guess: Update from FSF, for alpha-dec-winnt3.5 and Crays.
3470 * configure: Set build_{cpu,vendor,os,alias} to host values when
3471 --build isn't specified.
3475 * Makefile.in (PICFLAG, PICFLAG_FOR_TARGET): New macros.
3476 (FLAGS_TO_PASS): Pass them.
3477 (EXTRA_TARGET_FLAGS): Ditto.
3479 * config/m?-*pic: Define PICFLAG* instead of LIB*FLAGS*.
3483 * Makefile.in (all-libg++): Depend on all-libstdc++.
3487 * configure.in (noconfigdirs): Enable all packages for
3488 i386-unknown-netbsd.
3492 * configure.in (noconfigdirs): Don't configure tk for i386-go32
3493 hosted builds (DOS builds)
3497 Changes for ARM based on patches from Richard Earnshaw:
3498 * config.sub: Handle armeb and armel.
3499 * configure.in: Omit arm linker only for riscix.
3503 * config.guess: Update from FSF.
3507 * config.sub: Recognize powerpcle as the little endian varient of
3508 the PowerPC. Recgonize ppc as a PowerPC variant, and ppcle as a
3509 powerpcle variant. Convert pentium into i586, not i486. Add p5
3510 alias for i586. Map new x86 variants p6, k5, nexgen into i586
3515 * configure.in (hppa*-*-lites*): Treat like hppa*-*-*elf*.
3519 * config.sub: Accept -lites* as a basic system type.
3523 * config.guess (*:Linux:*:*): Check for whether the pre-BFD linker is
3524 installed, and if so return linuxoldld as the system name.
3528 * config.guess: Add hppa1.1-hp-lites support.
3532 * configure.in: Don't build newlib for m68k-vxworks5.1.
3536 * configure.in (mips-sgi-irix6): Use mh-irix5.
3540 * Makefile.in (all-gcc): Depend on all-ld (for libgcc1-test).
3544 * test-build.mk: Enable building of shared libraries on IRIX 5 and
3545 OSF/1. Fix compiler flags.
3546 * build-all.mk: Support Linux and OSF/1 3.0. Fix compiler flags.
3550 * configure.in: Recognize --with-newlib.
3551 (sparc-*-sunos4*): Build sim, dejagnu, expect, tcl if cross target.
3555 Merge in support for Mac MPW as a host.
3556 (Old change descriptions retained for informational value.)
3558 * mpw-config.in: Add generic include forwards for cpu-specific
3559 include files in aout and elf directories.
3561 * mpw-configure: Added copyright.
3562 * mpw-config.in: Check for presence of required build tools.
3563 (target_libs): Add newlib.
3564 (target_tools): Add examples.
3565 (Read Me): Generate as "Read Me for MPW" instead.
3566 * mpw-build.in: Base sub-builds on all-foo instead of do-foo.
3567 (all-byacc, do-byacc, all-flex, do-flex, do-newlib): New actions.
3568 (do-gas, do-gcc, do-gdb, do-ld): Build Version.r first.
3570 * mpw-configure: Remove subdir-specific makefile hackery,
3571 delete mk.tmp after using it.
3573 * mpw-build.in (all): Display start and end times.
3575 * mpw-configure (host_canonical): Set.
3576 (target_cpu): Always add to makefiles.
3577 (ARCHDEFS, EMUL): Add to makefile only if nonempty.
3578 (TM_FILE, XM_FILE, NM_FILE): No longer add to makefile.
3579 (mpw-mh-mpw): Look for in srcdir and srcroot.
3580 Use sed instead of mpw-edit-prefix to edit prefix definitions.
3582 * mpw-build.in: (install-only): New target.
3584 * mpw-configure (host_alias, target_alias): Rename from hostalias
3585 and targetalias, add into generated Makefile.
3586 (mk.tmp): If present, add into generated Makefile.
3587 * mpw-build.in (all-gas): Build config.h first before gas proper.
3589 * mpw-configure (config.status): Write only if changed.
3590 * mpw-config.in (readline): Configure it (not built, just used for
3593 * mpw-config.in (elf/mips.h): Add a forward include.
3595 * mpw-config.in: Forward-include most .h files in include into
3597 (readline): Don't build.
3598 mpw-build.in (install): Install GDB.
3600 * mpw-configure (prefix, mpw_prefix): Handle it.
3601 * mpw-config.in (mmalloc, readline): Don't configure.
3602 * mpw-build.in (thisscript): Rename to ThisScript.
3603 Use mpw-build instead of BuildProgram everywhere.
3604 (mmalloc, readline): Don't build.
3605 * mpw-README: New file, basic documentation about the MPW port.
3607 * mpw-config.in: Use forward-include to create include files.
3609 * mpw-configure: Add more things to the top of each configured
3610 Makefile, including contents of config/mpw-mh-mpw.
3611 * mpw-config.in (extra-include): Create this directory and fill it
3612 with Posix-like include files when configuring.
3614 * config.sub (apple, mac, mpw): Add various aliases.
3616 * mpw-build.in: New file, top-level build script fragment for MPW.
3617 * mpw-configure: New file, configure script for MPW.
3618 * mpw-config.in: New file, config fragment for MPW.
3622 * configure.in (host_libs): Remove glob, since it is gone from the
3627 * Makefile.in: define empty GDB_NLM_DEPS var.
3629 * configure.in(target_makefile_frag): use config/mt-netware
3630 for netware targets.
3634 * config.sub: Merge in recent FSF changes. Remove linux special
3639 build-all.mk,config/mh-solaris: revert these two changes:
3643 * build-all.mk: Use CC=cc -Xs on Solaris.
3645 Mon Mar 29 19:59:26 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3647 * config/mh-solaris: SunPRO C needs -Xs to be able to get a
3648 working xmakefile for Emacs.
3652 * glob/*: Removed. Schauer's 24 Feb 1994 readline change made us
3654 * Makefile.in: Nuke all references to glob subdirectory.
3658 * configure.in: Fix --enable-shared logic in per-host.
3662 * configure.in (*-hp-hpux[78]*): Use mh-hpux8.
3666 * configure.in (noconfigdirs): Don't build gas on AIX, for
3667 powerpc*-*-aix* as well as for rs6000*-*-aix*.
3671 * configure: Fix --cache-file to work if the file argument is a
3676 * configure: If the --cache-file is used, pass it down to
3677 configure in subdirectories.
3681 * config.sub: add vxworks29k configuration.
3685 * Makefile.in (taz): Do "diststuff" part quietly.
3689 * config.sub: Mini-merge with gcc/config.sub.
3693 * config.guess (IRIX): Sed - to _.
3697 * Makefile.in (source-vault, binary-vault): New targets.
3701 * config.sub: Recognize -eabi as a basic system type.
3705 * configure.in (enable_shared stuff): Fix typo.
3709 * Makefile.in (BASE_FLAGS_TO_PASS): Fix typo in passing LIBCXXFLAGS*.
3713 * Makefile.in (LIBCXXFLAGS_FOR_TARGET): Add -fno-implicit-templates.
3717 * configure.in (rs6000-*-*): Don't build gas.
3721 * Makefile.in: Use /x/x/ instead of /brokensed/brokensed/, to
3722 reduce command line length.
3723 (AS_FOR_TARGET): Check for as.new, not Makefile.
3724 (NM_FOR_TARGET): Check for nm.new, not Makefile.
3728 * config.guess: Merge from FSF.
3732 * configure: Don't use $ when handling program_suffix.
3736 * configure.in: Configure tk for hppa/hpux.
3740 * Makefile.in (LIBGXX_SUPPORT_DIRS): Add libstdc++.
3744 * Makefile.in: Move -fno-implicit-template from CXXFLAGS
3745 to LIBCXXFLAGS. Tests are better run without it.
3749 * Makefile.in (all-ispell): Depend on all-emacs19 instead of all-emacs.
3753 * configure.in (*-*-netware*): Don't configure xiberty.
3757 * configure.in: Remove tk from native_only list.
3761 * build-all.mk: Add mips-ncd-elf target to sun4 targets
3762 for special NCD build.
3766 * Makefile.in (DEVO_SUPPORT): Remove configure.bat and
3767 makeall.bat, they're only useful for binutils snapshots.
3768 (binutils.tar.gz, gas+binutils.tar.gz): Add configure.bat and
3769 makeall.bat to specified SUPPORT_FILES.
3773 * build-all.mk: Add Ericsson targets to sun4 and solaris
3774 hosts. Add BNR's sun4 target to solaris host, so their
3775 build-from-source will be tested in-house first.
3779 * Makefile.in (LIBCFLAGS): New variable.
3780 (CFLAGS_FOR_TARGET): Ditto.
3781 (LIBCFLAGS_FOR_TARGET): Ditto.
3782 (LIBCXXFLAGS): Ditto.
3783 (CXXFLAGS_FOR_TARGET): Ditto.
3784 (LIBCXXFLAGS_FOR_TARGET): Ditto.
3785 (BASE_FLAGS_TO_PASS): Pass them.
3786 (EXTRA_TARGET_FLAGS): Ditto.
3788 * configure.in, config/m[th]-*pic: Support --enable-shared.
3792 * configure.in (target_libs): Include libstdc++ again.
3793 * config.guess: Update from FSF (for FreeBSD).
3797 * Makefile.in (DEVO_SUPPORT): Include configure.bat and
3799 (DISTDOCDIRS): Add `etc'.
3800 (ETC_SUPPORT_PFX): New variable.
3801 (taz): Include anything from etc starting with a word in
3806 * config.sub: Update for recent FSF changes. Remove obsolete
3807 h8300hds entry. Add -windows* and -osx as basic os. Minor
3812 * configure.in (target_libs): Remove libstdc++ for libg++-2.6.1.
3814 * config.guess: Merge with FSF.
3815 * configure.in: Match on i?86-ncr-sysv4.3, not i?86-ncr-sysv43.
3819 * configure: Since the "trap 0" handler will override the exit
3820 status on many systems, only use it for "exit 1", and make it set
3821 a non-zero exit status; reset it before "exit 0". Also, check
3822 exit status of config.sub, and error out if it failed.
3826 * Makefile.in: (ALL_TARGET_MODULES,INSTALL_TARGET_MODULES) Build
3827 and install libgloss.
3831 * Makefile.in (all-binutils): Depend upon all-byacc.
3833 * configure.in: Don't build emacs on Irix 5.
3837 * configure.in (*-*-netware*): Add libio.
3841 * Makefile.in (ALL_TARGET_MODULES): Add libstdc++.
3842 (CHECK_TARGET_MODULES): Ditto.
3843 (INSTALL_TARGET_MODULES): Ditto.
3844 (TARGET_LIBS): Ditto.
3845 (all-libstdc++): Note dependencies.
3849 * Makefile.in (BINUTILS_SUPPORT_DIRS): Add gas.
3853 * Makefile.in (CXXFLAGS): Use -fno-implicit-templates instead of
3854 -fexternal-templates.
3856 * configure.in (target_libs): Add libstdc++.
3857 (noconfigdirs): Add libstdc++ as appropriate.
3861 * config.guess: Update from FSF.
3865 * configure: Use ${config_shell} when running ${configsub}.
3869 * config.sub: No longer recognize h8300h.
3873 * config.sub: Remove extraneous differences between config.sub and
3878 * Makefile.in (DISTSTUFFDIRS): Add gas.
3882 * COPYING.NEWLIB: New file.
3886 * config.guess (HP-UX): Patch from Harlan Stenn
3891 * config.guess (sun4*:SunOS:*:*): Change '-JL' to '_JL'.
3895 * config.sub: Merge nextstep cleanup from FSF.
3899 * configure.in (arm-*-*): Don't configure ld for this target.
3903 * configure.in (*-*-netware): don't configure libg++, libio,
3908 * configure.in (alpha-dec-osf*): Use osf*, not osf1*. Don't
3909 configure ld--it works, but it doesn't support shared libraries.
3913 * config.guess (*-unknown-freebsd*): Get rid of possible
3914 trailing "(Release)" in version string.
3919 * config.guess: Fix i486-ncr-sysv43 -> i486-ncr-sysv4.3.
3920 Fix type: *-next-neststep -> *-next-nextstep.
3922 * config.guess: Merge from FSF:
3926 * config.guess: Recognize powerpc-ibm-aix3.2.5.
3930 * config.guess: Recognize UnixWare 1.1 (UNAME_SYSTEM is SYSTEM_V
3931 instead of UNIX_SV for UnixWare 1.0).
3935 * Makefile.in (all-gdb): Add dependencies on all-gcc and all-ld
3936 to make gdb/nlm/* build after the compiler and linker.
3940 * config.guess (netbsd, freebsd, linux): Accept any machine,
3942 (m68k-atari-sysv4): Relocate to match FSF version.
3944 * config.guess: More merges from the FSF:
3946 Add a space before function call or macro invocation.
3950 * config.guess: Add trap cmd to remove dummy.c and dummy when
3955 * config.guess (dummy.c): Redirect stderr for `hostinfo' command.
3956 (dummy): Redirect stderr from compilation of dummy.c.
3960 * config.guess: Distinguish between NeXTStep 2.1 and 3.x.
3964 * configure: Accept and ignore --cache*, for compatibility with
3969 * config.guess: Merge from FSF:
3973 * config.guess (Pyramid*:OSx*:*:*): New case.
3974 (PATH): Add /.attbin at end for finding uname.
3975 (dummy.c): Handle i860-alliant-bsd. Follow whitespace conventions.
3979 * config.guess (M88*:DolphinOS:*:*): New case.
3983 * config.guess (AViiON:dgux:*:*): Use TARGET_BINARY_INTERFACE
3984 to select whether to use ELF or COFF.
3988 * config.guess: Recognize i860-stardent-sysv and i860-unknown-sysv.
3992 * config.guess: Guess the OS version for HPUX.
3996 * config.guess (UNAME_VERSION): Recognize aix3.2.4 and aix3.2.5.
4000 * configure.in: Recognize --with-headers, --with-libs, and
4002 * Makefile.in (all-xiberty): Depend upon all-ld.
4006 * configure.in: Change i[34]86 to i[345]86.
4010 * configure (version): A few more tweaks to help message.
4014 * Makefile.in: Remove (for now) librx as a host library,
4015 now that we're building it for target.
4024 * configure.in: Also configure librx.
4028 * Makefile.in: Update various rules to reflect that librx
4029 is now needed for libg++.
4033 * config.sub: Accept mips64orion and mips64orionel as a CPU name.
4037 * configure.in: Configure the examples directory.
4041 * configure: Simplify Jun 2 1994 change.
4045 * change CC to /usr/latest/bin/gcc for lynx host builds, since
4046 /bin/gcc isn't good enough to build gcc.
4050 * Makefile.in (GDB_SUPPORT_FILES): Remove
4051 (setup-dirs-gdb, gdb.tar.gz, make-gdb.tar.gz): Remove old rules.
4052 (gdb.tar.gz): Add new rule to use standard distribution building
4057 * configure.in: Warn about use of /usr/ucb/cc on Solaris. From
4066 * configure: Search current dir first in .gdbinit.
4070 * config.sub: Recognize freebsd (merged from gcc config.sub).
4074 * config.sub: Refer to NeXT's operating system as nextstep.
4076 * config.sub (case $basic_machine): Re-order the cases, to match
4077 the order in the FSF version (which is mostly alphabethical).
4078 Merge in some additions and changes from the FSF.
4082 * config.guess: Recognize m68k-atari-sysv4 and m88k-harris-csux7.
4083 * config.sub: Recognize cxux7.
4084 * configure.in: Use mh-cxux for m88k-harris-cxux*.
4088 * config.sub: Fix typo powerpc -> powerpc-*.
4092 * Makefile.in: `all-emacs19' depends on `all-byacc'.
4094 * Makefile.in: Add all-emacs19 and install-emacs19 rules (in
4095 parallel with all-emacs and install-emacs). Top-level command
4096 `make all-emacs19 CC=gcc' now behaves as `make all-emacs CC=gcc'.
4100 * test-build.mk ($(host)-stamp-stage2-installed): Remove
4101 $(relbindir)/make before doing ``make install'', and use
4102 $(GNU_MAKE) while doing it. Avoids problem on SunOS with
4103 installing over running make binary.
4104 ($(host)-stamp-stage3-installed): Likewise.
4108 * config.guess: Recognize Mach.
4112 * configure: Check ${exec_prefixoption}, not ${exec_prefix}, to
4113 see whether --exec-prefix was used.
4117 * README: Explicitly mention libg++/README. (Zoo's idea.)
4121 * Makefile.in: Add all-librx target similar to all-libproc.
4125 * config.guess: Rearrange tests for Alpha-OSF1 to properly deal
4126 with post 1.2 uname bogosity.
4130 * configure: Remove temporary files on receipt of a signal.
4134 * configure: If there is a package_makefile_frag, remove
4135 ${subdir}/Makefile.tem after copying it in.
4139 * build_all.mk: support rs6000 lynx identifies itself as
4140 rs6000-lynx-lynxos2.2.2. Also, use /usr/cygnus/progressive/bin/gcc
4141 since /bin/gcc is too feeble to compile a modern gcc.
4145 * brought devo/test-build.mk update-to-date with progressive/
4146 test-build.mk. Add lynx targets and hppa flag info.
4150 * configure.in: Use mh-ncrsvr43. Patch from
4155 * config.guess (i386-unknown-bsdi): No longer need to
4156 check #if defined(__bsdi__) && defined(__i386__).
4160 * configure: Set program_transform_nameoption correctly.
4164 * brought build-all.mk update-to-date with progressive build-all.mk,
4165 added new targets and hppa info.
4169 * configure: If config.guess result is a prefix of the user
4170 specified target, assume a native build and use the user specified
4171 target as the host alias. Remove SunOS patch suffix removal hack.
4172 * configure.in: Remove SunOS patch suffix removal hack.
4174 * Makefile.in (CROSS_CHECK_MODULES): Remove check-flex, since it's
4175 in NATIVE_CHECK_MODULES.
4179 * Makefile.in: Rename HOST_ONLY to NATIVE.
4180 * configure: Delete SunOs patch suffix from host_canonical
4181 and build_canonical variables that are prepended to Makefiles.
4182 * configure.in: Add comments for easier maintenance.
4186 * Makefile.in: Add all-libproc target similar to all-gui.
4190 * Makefile.in (CHECK_MODULES): split into
4191 HOST_ONLY_CHECK_MODULES and CROSS_CHECK_MODULES.
4195 * config.guess (i386-unknown-bsdi): New system to guess.
4199 * Makefile.in: Add all-gui target (but not yet build by "all").
4203 * config.sub: Move deletion of patch suffix from here...
4204 * configure.in: To here, at Ian's suggestion. The top-
4205 level scripts might need to know of a patch level.
4209 * config.sub: Strip off patch suffix so rtl is recognized
4210 as a sunos4.1.3 machine, even though it's been patched.
4214 * Makefile.in (INSTALL_LAST): Delete.
4215 (INSTALL_DOSREL): New.
4219 * configure.in: Use ld for i[34]86-*-sysv4* and sparc-*-solaris2*.
4220 Don't set use_gnu_ld to no for *-*-sysv4; that only controls
4221 whether we pass down --with-gnu-ld anyhow.
4225 * Makefile.in (INSTALL_LAST): Change operation so it works
4226 on more flavors of make.
4227 * configure.in (go32): Don't build libg++ or libio.
4231 * Makefile.in (Move HOST_PREFIX_1 and friends up so
4232 they can be overriden by templates.
4236 * configure.in (target==go32): Don't build gdb.
4237 * dosrel: New directory.
4241 * configure.in (host==go32): Configure dosrel too.
4242 * Makefile.in (INTALL_TARGET): Call INSTALL_LAST last.
4243 (HOST_CC, HOST_PREFIX, HOST_PREFIX_1): Undefine, they should
4244 be set by incoming names or templates.
4245 (INSTALL_LAST): New rule.
4246 * config/mh-go32: New fragment.
4250 * config.sub (sparclitefrw, sparclitefrwcompat): Don't set the os.
4254 * config/mh-lynxrs6k: Renamed from mh-lynxosrs6k, to make it
4255 unique in 8.3 naming schemes.
4256 * configure.in (appdirs): New variable. Currently empty, but will
4257 be used in gas distribution. If nonempty, lists a set of
4258 directories at least one of which must get configured, or top
4259 level configuration is considered to have failed.
4260 (rs6000-*-lynxos*): Use new file name.
4264 Eliminate XTRAFLAGS.
4265 * Makefile.in (CC_FOR_TARGET): If newlib exists, refer to the
4266 newlib include files using -idirafter, and also use -nostdinc.
4267 (CXX_FOR_TARGET): Likewise.
4268 (XTRAFLAGS): Removed.
4269 (BASE_FLAGS_TO_PASS): Remove XTRAFLAGS_FOR_TARGET.
4270 (EXTRA_HOST_FLAGS): Remove XTRAFLAGS.
4271 (EXTRA_TARGET_FLAGS, EXTRA_GCC_FLAGS): Likewise.
4272 ($(DO_X)): Don't pass down XTRAFLAGS.
4276 * configure.in (mips*-dec-bsd*): New target; do build linker.
4277 (mips*-*-bsd*): New target; don't build linker.
4281 * configure.in: support rs6000-*-lynxos* configuration.
4282 support sunos4 as a cross target.
4284 * config.sub: look for lynx*, not lynx since the OS version may
4285 legitimately be part of the name.
4289 * configure.in (i[34]86-*-sco*): Move to be with other i386
4291 (romp-*-*): New target. Skip various binary utilities.
4292 (vax-*-*): New target. Don't build newlib.
4293 (vax-*-vms): Renamed from *-*-vms. Don't build opcodes or newlib.
4297 * configure.in: Only set host_makefile_frag if config
4302 * install.sh: If $dstdir exists, don't check whether each
4307 * test-build.mk (HOLES): Add sleep; used by rcs/src/conf.sh.
4311 * configure.in (*-*-lynxos*): Don't configure newlib for either
4312 native or cross Lynx.
4316 * config.sub (sparc64-elf): Fix os.
4317 (z8k): Remove duplicate.
4321 * Makefile.in (gcc-no-fixedincludes): Touch gcc/include/fixed, not
4322 gcc/stmp-fixproto, to try to prevent fixproto from being run.
4326 * configure: Make file links cleanly even if Lynx fails on
4327 an NFS symlink (at least fail cleanly).
4331 * test-build.mk (CC): For mips-sgi-irix4, change -XNh1500 to
4336 * configure: Unknown options are fatal again.
4340 * configure: Ignore --x-includes and --x-libraries, for Autoconf
4345 * build-all.mk: Add `clean' target.
4349 * config.guess: Add SINIX support.
4350 * configure.in: Add mips-*-sysv4* support.
4354 * build-all.mk: Document all useful targets.
4355 If canonhost is sparc-sun-solaris2.3, change it to sparc-sun-solaris2.
4356 If canonhost is mips-sgi-irix4.0.5H, change it to mips-sgi-irix4.
4360 * configure: Support --silent, --quiet.
4364 * configure: Support --disable-FEATURE.
4368 * config.guess: Recognize NCR running SVR4.3.
4372 * config.guess: Make BSDI generate i386-unknown-bsd386.
4377 * configure.in (powerpc-*-aix*): Treat like rs6000-*-*.
4381 * configure: Make unrecognized options give nonfatal warnings
4382 instead of fatal errors, and pass them to any subdirectory
4383 configures in case they recognize them.
4384 Make --x equivalent to --with-x.
4388 * configure: Add --enable-* options. Clean up usage message and
4393 * Makefile.in (NM_FOR_TARGET): Build tree version is now nm.new.
4397 * configure.in (hppa*-*-*): Enable binutils.
4401 * config.sub: Recognize cisco.
4405 * Makefile.in (CXXFLAGS): Add -fexternal-templates.
4409 * config.guess: about target *-hitachi-hiuxwe2, don't print more
4410 than one configuration name. Add comment.
4414 * config.guess: about target *-hitachi-hiuxwe2, fixed
4415 machine guessing order. [Hitachi's CPU_IS_HP_MC68K
4416 macro is incorrect.]
4420 * Makefile.in (TAGS): Just build TAGS in each subdirectory, rather
4421 than the "make ls" stuff which used to be here.
4425 * config.guess: Recognize i[34]86-unknown-freebsd.
4430 * configure.in (noconfigdirs for alpha): Remove libg++ and libio.
4434 * config.guess: Check for ptx.
4438 * config.sub: Add os9k checking.
4442 * config.guess: Handle OSF1 running on HPPA processors
4446 * configure: If subdir configure fails, print out a message with
4447 subdirectory name, in case subdir's configure code didn't identify
4452 * configure.in: Remove embedded newlines from configdirs.
4453 Avoid mismatches of substrings. Fix matching strings at end
4456 Fri Feb 11 15:33:33 1994 Stu Grossman (grossman at cygnus.com)
4458 * config.guess: Add Lynx/rs6000 config support.
4462 * configure.in (alpha-dec-osf1*, alpha*-*-*): Build gas.
4466 * configure.in (hppa*-*-osf*): Treat this just like most other
4467 PA configurations (eg no binutils or ld).
4468 (hppa*-*-*elf*): These configurations have binutils and ld.
4476 * configure.in (rs6000-*-*): Build gas.
4480 * Makefile.in: Avoid bug in losing hpux sed.
4484 * Makefile.in, test-build.mk: Remove MUNCH_NM; it was only needed
4485 for GDB and GDB has been fixed to not need it.
4487 Mon Jan 31 18:40:55 1994 Stu Grossman (grossman at cygnus.com)
4489 * config/mh-lynxosrs6k: Account for lack of ranlib!
4493 * config.guess: Recognize vax hosts.
4497 * configure (while loop): Don't use "break 2" inside case
4498 statement -- the case statement isn't an enclosing loop.
4502 * config.guess: Clean up NeXT support, to allow nextstep
4503 on Intel machines. Make OS be nextstep.
4507 * config.guess: Add alternate forms for Convex.
4509 Thu Jan 20 16:13:41 1994 Stu Grossman (grossman at cygnus.com)
4511 * configure: Completely rewrite option processing. Take
4512 advantage of pattern-matching to avoid invoking test frequently.
4513 Also clean up host and target defaulting logic.
4517 * Makefile.in: Replace all occurrances of "rootme" with "r" and
4518 "$${rootme}" with "$$r", to increase the likelihood that the do-*
4519 commands (plus user environment) will fit SCO limits.
4523 * configure.in: Don't issue warnings about directories which are
4524 not being configured if -norecursion is set. Correct test for
4525 --with-gnu-as and --with-gnu-ld to not get confused by substring
4528 * configure.in: Don't build gas for alpha-dec-osf1*.
4530 Tue Jan 4 17:10:19 1994 Stu Grossman (grossman at cygnus.com)
4532 * configure: Back out Per's change of 12/19/1993. It changes the
4533 behavior of configure in unexpected and confusing ways.
4535 Also, use different delim char when calculating
4536 program_transform_name so that the name can contain slashes.
4540 * configure.in, config.sub: Add support for VSTa micro-kernel.
4544 * configure.in: Nuke hacks which were used to get a special
4545 version of GAS for HPPA configurations.
4549 * configure: If only ${target_alias} is given, use that
4550 as the default for ${host_alias}.
4551 * configure: Add missing back-slashes before nested quotes.
4555 * Makefile.in (BASE_FLAGS_TO_PASS): add YACC=$(BISON)
4559 * config.guess: Recognize some Tektronix configurations.
4564 * config.sub: Match any flavor of SH.
4568 * configure.in: Don't try to configure newlib for Alpha.
4572 * configure.in: Don't build ld for Irix 5. Don't build gas,
4573 libg++ or libio for any Alpha target.
4575 * configure.in (mips*-sgi-irix5*): New target; use mh-irix5.
4576 * config/mh-irix5. New file for Irix 5.
4580 * Makefile.in (GZIPPROG): Renamed from GZIP, which gzip uses for
4581 default arguments -- so it tried to compress itself.
4585 * configure.in (notsupp): ensure that a space is always at the end
4586 of the configdirs list, since the grep checks for an explicit space
4590 * configure.in (target i386-sysv4.2): don't build ld, since static
4591 versions of many libraries are not available.
4595 * config.guess: Recognize Apollos (using environment variables).
4596 * configure.in: Don't configure ld, binutils, or gprof for Apollo.
4600 * config.guess: Recognize Sony news mips running newsos.
4604 * Makefile.in (all-cygnus, build-cygnus): "fi else" needs to be
4605 "fi ; else" for bash.
4609 * Makefile.in (BASE_FLAGS_TO_PASS): pass SHELL.
4613 * config.sub: accept unixware as an alias for svr4.2.
4614 Fix some inconsistancies with the gcc version.
4618 * Makefile.in (DISTDOCDIRS): Add gdb.
4622 * Makefile.in (DISTDOCDIRS): Add libg++ and libio.
4626 * Makefile.in (taz): Only build "info" in DISTDOCDIRS.
4627 (DISTDOCDIRS): Don't assume libg++ and gdb folks necessarily want
4632 * config.sub: Accept hiux* as an OS name.
4634 * Makefile.in: Change RUNTEST_FLAGS back to RUNTESTFLAGS per
4635 etc/make-stds.texi. The underscore came from gcc, and dje now
4636 agrees that RUNTESTFLAGS is the correct name.
4640 * install.sh: Remove 'set -e'. It makes any conditionals
4641 in the script useless.
4643 * config.guess: Automatically recognize arm-acorn-riscix
4648 * Makefile.in: Change RUNTESTFLAGS to RUNTEST_FLAGS
4652 * Makefile.in (DISTDOCDIRS): New variable.
4653 (taz): Edit local Makefile.in sooner, instead of proto-toplev
4654 Makefile.in later. Build "info" and "dvi" in DISTDOCDIRS.
4658 * configure.in (hppa target): check the source directory for the
4663 * config.sub: Allow -aout* and -elf*.
4667 * configure.in: Don't build ld on i386-solaris2, same as for
4672 * Makefile.in (taz): Add texinfo/lgpl.texinfo (for libg++).
4676 * configure.in: Configure gdb for alpha.
4680 * Makefile.in (CXXFLAGS): Add -O.
4684 * config.guess: added support for DG Aviion
4688 * configure.in: Produce warning message for subdirectories not
4689 configurable for this host/target combination. Don't try to
4690 configure gdb for vms.
4694 * Makefile.in (taz): Replace "byacc" with "bison -y" in the
4695 appropriate files before making "diststuff".
4696 (DISTBISONFILES): New var: list of files to be edited.
4697 (DISTSTUFFDIRS): Add binutils.
4701 * config.sub: also handle mipsel and mips64el (for little endian mips)
4705 * configure.in: Add * to end of all OS names.
4709 * configure.in: Build newlib for LynxOS native.
4713 * config.guess: Add support for delta 88k running SVR3.
4715 * configure.in: Add comment about HP compiler vs. emacs.
4719 * configure.in: don't build ld on solaris2 (not a viable option
4720 due to bugs in getpwnam & getpwuid)
4724 * configure.in: Accept alpha-dec-osf1*, not just -osf1, since
4725 config.guess will produce a full version number.
4729 * configure.in: Build linker and binutils for alpha-dec-osf1.
4733 * Makefile.in: Remove -O from CXXFLAGS for consistency with CFLAGS,
4734 and gdb/testsuite/Makefile.in.
4738 * configure.in: recognize mips*- instead of mips-
4742 * config.sub: Accept linux*coff and linux*elf as operating
4747 * config.sub: Recognize mips64, and mips3 as an alias for it.
4751 * configure.in: Remove alpha-dec-osf*, no longer necessary now that
4752 gdb knows how to handle OSF/1 shared libraries.
4756 * configure.in: Recognize hppa*-*-hiux* (currently synonym for hpux).
4757 * config.guess: Recognize Hitachi's HIUX.
4758 * config.sub: Recognize h3050r* and hppahitachi.
4759 Remove redundant cases for hp9k[23]*.
4763 * configure.in: default to '--with-gnu-as' and '--with-gnu-ld'
4764 if gas and ld are in the source tree and are in ${configdirs}.
4765 If ${use_gnu_as} or ${use_gnu_ld} are 'no', then don't set the
4766 the --with options (but still pass them down on the command line,
4767 if they were explicitly specified).
4771 * configure: substitute SHELL value in Makefile.in with
4776 * configure.in: Build gas, ld, and binutils for *-*-sysv4* and
4777 *-*-solaris2* targets.
4781 * Makefile.in: define M4, and pass it down to sub-makes;
4782 all-autoconf now depends on all-m4
4786 * Makefile.in ({AR,RANLIB}_FOR_TARGET): make contingent on
4787 presence of {ar,ranlib} instead of a configured directory
4791 * config.guess: Accept 34?? as well as 33?? for NCR.
4795 * configure.in: grab mt-hppa for HPPA targets; use 'gas ' instead
4796 of 'gas' in sed commands, since 'gash' is now in the tree as well.
4800 * configure: grab values for $(CC) and $(CXX) from the
4801 environment, so that someone can do "CC=gcc configure; make" and
4802 have it work right (matching the way that autoconf works now)
4804 * configure.in, Makefile.in: add support for gash, the tcl
4807 * config.guess: add NetBSD variants (hp300, x86)
4811 * install.sh: Support -d option (in the manner of SunOS 4 install,
4812 as it is more deterministic than that of GNU install)
4813 (chmodcmd): Set file to mode 755 by default (should also do default
4814 chgrp and chown, but I don't feel like dealing with that now)
4818 * config.sub: Remove h8300hhms alias.
4822 * configure.in: Match *-*-solaris2* not *-sun-solaris2*.
4826 * Makefile.in (gcc-no-fixedincludes): touch stmp-fixproto as well
4831 * config.sub: recognize m88110-bug-coff.
4835 * Makefile.in (all-libio): all dependencies on the toolchain used
4836 to build this (gcc, gas, ld, etc)
4840 * config.guess: Deal with OSF/1 1.3 on alpha.
4844 * install.sh: add some 'else true' clauses for portability
4846 * configure.in: don't build libio for h8[35]00-*-* targets
4850 * Makefile.in: Add support for new libio.
4854 * install.sh: If one command fails, don't try the rest. Don't try
4855 to remove $dsttmp (via trap) unless we have already created it.
4856 If $src doesn't exist, detect it and exit with an error.
4858 * config.guess: Recognize BSD on hp300.
4862 * config.guess: Map (9000/[34]??:HP-UX:*:*) to m68k-hp-hpux.
4867 * Makefile.in (all-send-pr): depends on all-prms
4871 * config.guess: Fix typo (9000/8??:4.3bsd -> 9000/7??:4.3bsd).
4876 Added test for mips-mips-riscos5.
4880 * configure.in: use mh-hp300 for 68k HP hosts
4884 * configure: add support for CONFIG_SHELL, so that you can use
4885 some alternate shell for evaluating configure scripts
4889 * Makefile.in (make-gdb.tar.gz): Sed bug reporting address
4891 distribution archive.
4892 * Makefile.in (COMPRESS): Remove def.
4893 * Makefile.in (gdb.tar.gz, make-gdb.tar.gz): Renamed from
4894 gdb.tar.Z and make-gdb.tar.Z respectively.
4895 * Makefile.in (make-gdb.tar.gz): Now only build gzip'd archive.
4896 * Makefile.in (make-gdb.tar.gz): Minor changes to move closer
4897 to convergence with 'taz' target in Makefile.in.
4901 * install.sh (dsttmp): use trap to ensure that tmp files go
4902 away on error conditions
4906 * Makefile.in (BASE_FLAGS_TO_PASS): remove LOADLIBES
4910 * Makefile.in (install-dirs): Deal with a prefix like /gnu;
4911 its parent is '/' not ''.
4913 * Makefile.in (DEVO_SUPPORT): Add comments about ChangeLog.
4917 * configure: if ${newsrcdir}/configure doesn't exist, don't assume
4918 that ${newsrcdir}/configure.in does.
4922 * test-build.mk: support for CONFIG_SHELL
4926 * config.sub (netware): Add as a basic system type.
4930 * Makefile.in (Makefile): depend on configure.in. Also drop the
4931 $(srcdir)/ from the dependency on Makefile.in.
4935 * config.sub: Recognize h8300hhms as h8300h-hitachi-hms.
4936 (h8300hhms is temporary until multi-libraries are implemented).
4937 * configure.in: Handle h8300h too.
4941 * config.guess: Recognize dpx/2 as m68k-bull-sysv3.
4945 * configure: Remove extraneous output when guessing host type.
4946 * config.guess: Remove extraneous output when guessing using C
4947 compiler rather than uname, or when guessing fails.
4949 Wed Jul 7 17:58:14 1993 david d `zoo' zuhn (zoo at rtl.cygnus.com)
4951 * Makefile.in: remove all.cross and install.cross targets
4953 * configure: remove CROSS=-DCROSS_COMPILE and ALL=all.cross
4958 * configure.in (target sh): Build gprof.
4960 Thu Jul 1 16:52:56 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4962 * config.sub: change -solaris to -solaris2
4966 * configure.in: Use config/mh-riscos for mips-*-sysv*.
4970 * configure: Correct error message for missing Makefile.in to
4971 print correct directory.
4973 Tue Jun 29 13:52:16 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4975 * install.sh: kludge around 386BSD shell bug
4979 * config.guess: Recognize NeXT.
4980 * config.guess: Recognize i486-ncr-sysv4.
4981 * Makefile.in (taz): rm $(TOOL)-$$VER before linking.
4985 * Makefile.in (MAKEINFOFLAGS): New variable.
4986 (FLAGS_TO_PASS): Pass MAKEINFO as MAKEINFO MAKEINFOFLAGS.
4987 * build-all.mk, test-build.mk: Pass down --no-split as
4988 MAKEINFOFLAGS when hosted on DOS. Compile DOS hosted without -g.
4992 * Makefile.in (DEVO_SUPPORT): Add COPYING COPYING.LIB install.sh.
4996 * Makefile.in (libg++.tar.z): New rule.
4997 * Makefile.in (taz): Replace 'configure -rm' by 'make distclean'.
4998 * Makefile.in (taz): Only do a single chmod.
5000 Fri Jun 18 12:03:10 1993 david d `zoo' zuhn (zoo at majipoor.cygnus.com)
5002 * install.sh: don't use dirname anymore (replaced with sed usage)
5006 * Makefile.in: Change extension for gzip'd files from '.z' to
5007 '.gz' per new FSF standard usage.
5009 Thu Jun 17 16:58:50 1993 david d `zoo' zuhn (zoo at majipoor.cygnus.com)
5011 * configure: put quotes around the final value of program_transform_name
5013 Tue Jun 15 16:48:51 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5015 * Makefile.in: new install.sh support; update install-info rules
5019 * configure.in: Build diff for crosses, but not for go32 host.
5021 * configure.in: Build gprof only for native, and don't build it
5022 for mips-*-*, rs6000-*-*, or i[34]86-*-sco*.
5024 Mon Jun 7 13:12:11 1993 david d `zoo' zuhn (zoo at deneb.cygnus.com)
5026 * configure.in: don't build gas,ld,binutils on for *-*-sysv4
5030 * configure.in (host_tools): Add prms.
5032 Fri Jun 4 13:30:42 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5034 * Makefile.in: install gcc, do installation of $(INSTALL_MODULES)
5035 with $(FLAGS_TO_PASS) on the command line
5037 * config.sub: Recognize lynx and lynxos
5041 * config.sub: Accept -ecoff*, not just -ecoff.
5045 * Makefile.in (taz): Use .gz suffix instead of .z.
5046 (binutils.tar.gz, gas+binutils.tar.gz, gas.tar.gz): Fixed target
5049 Thu Jun 3 00:27:06 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5051 * Makefile.in (vault-install): add an 'else true' (for Ultrix)
5053 Wed Jun 2 18:19:16 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5055 * Makefile.in (install-no-fixedincludes): install gcc last, so
5056 that rebuilds that might happen during 'make install' don't get
5057 bogus gcc include files
5061 Change from Utah for HPPA support:
5062 * config.guess: Recognize hppa1.x-hp-bsd.
5066 * config.guess: Add support for Motorola Delta 68k, up to r3v7.
5069 Tue Jun 1 17:48:42 1993 Rob Savoye (rob at darkstar.cygnus.com)
5071 * config.sub: Add support for rom68k and bug boot monitors.
5075 * Makefile.in: Make all-opcodes depend on all-bfd.
5079 * config.guess: Added special check for i[34]86-univel-sysv4*.
5083 * config.guess: For i[34]86-unknown-sysv4 use UNAME_MACHINE for
5084 the processor rather than assuming i486.
5088 * config.guess: Recognize SunOS6 as Solaris3.
5092 * config.guess: Fix typo. Avoid #elif (not in K&R 1).
5093 Recognize SunOS 5.* only (and not [6-9].*) as being Solaris2.
5097 * build-all.mk (all-cross): New target for Canadian Cross.
5098 Added Q2 go32 targets.
5099 * test-build.mk: Configure go32 cross sparclite-aout and
5100 mips-idt-ecoff -with-gnu-ld. Moved build binary directory from
5101 PARTIAL_HOLE_DIRS to BUILD_HOLES_DIRS.
5103 Mon May 24 15:30:06 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5105 * configure.in: fix Alpha GDB typo; also, don't build DejaGnu for
5106 GO32 hosted toolchains
5108 Mon May 24 14:18:41 1993 Rob Savoye (rob at darkstar.cygnus.com)
5110 * configure: change so "-exec-prefix" gets passed down rather
5111 than "-exec_prefix" so autoconf generated Makefiles get the
5112 exec_prefix set right.
5114 Fri May 21 10:42:25 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5116 * config.guess: get the Solaris2 minor version number
5118 * Makefile.in: add standards.texi and make-stds.texi to ETC_SUPPORT
5122 * config.guess: Recognize some Sequent platforms.
5124 Thu May 20 14:33:48 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5126 * Makefile.in: added the vault-install target
5128 * configure.in: actually use the Sun3 makefile fragment that's in
5129 config, also added the release dir to configdirs
5133 * Makefile.in (taz): Fix modes on stuff in $(TOOL) dir also.
5135 Tue May 18 20:26:41 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5137 * configure.in: remove some program from Alpha targetted toolchains
5141 * Makefile.in (DISTSTUFFDIRS): Renamed from PROTODIRS. Add ld and
5143 (taz): Run "make diststuff" in those directories instead of "make
5144 proto-dir". Look for "VERSION=" only at start of line in subdir
5145 Makefile. Use "gzip -9" for compression.
5146 (TEXINFO_SUPPORT, DIST_SUPPORT, BINUTILS_SUPPORT_DIRS): New vars.
5147 (binutils.tar.z): New target.
5151 * Makefile.in (taz): Include gpl.texinfo.
5155 * Makefile.in (setup-dirs): Merged into "taz" target.
5156 (taz): Only do `proto-dir' stuff if a directory is actually needed
5161 * Makefile.in (MUNCH_NM): New variable, defined to be $(NM).
5162 (FLAGS_TO_PASS): Pass down MUNCH_NM.
5163 (HOST_CC, HOST_PREFIX, HOST_PREFIX_1): New variables.
5164 (EXTRA_GCC_FLAGS): Pass down HOST_* variables.
5165 (gcc-no-fixedincludes): Correct for current gcc Makefile.
5169 * Makefile.in (make-gdb.tar.Z): Add configure, config.guess,
5170 config.sub, and move-if-change to gdb testsuite distribution
5171 archive, so the testsuite can be extracted, configured, and
5172 run separately from the gdb distribution. Blow away the Chill
5173 tests that require a Chill compiled executable, since GNU Chill
5174 is not yet publically available.
5176 Mon May 10 17:22:26 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5178 * test-build.mk: set environment variables in a single command,
5179 instead of a list of assignments and exports
5181 * config.guess: recognize Alpha/OSF1 systems
5185 * configure: Change help message to prefer --options rather than
5190 * config.sub: Convergent Tech. "miniframe" uses m68010, sez
5192 * config.guess: Recognize miniframe.
5194 Sun May 9 17:47:57 1993 Rob Savoye (rob at darkstar.cygnus.com)
5196 * Makefile.in: Use srcroot to find runtest rather than rootme.
5197 Pass RUNTESTFLAGS and EXPECT down in BASE_FLAGS_TO_PASS.
5201 * test-build.mk: Extensive additions to support building on a
5202 machine other than the host.
5206 * configure (tooldir): Fix for i386-aix again.
5210 * configure, Makefile.in: Change definition of $(tooldir)
5215 * config.guess: Recognize i[34]86/SVR4.
5219 * Makefile.in (all-gdb): gdb depends on sim.
5223 * Makefile.in (gdb.tar.Z): Make prototype gdb testsuite directory
5224 at the same time we make the prototype gdb directory.
5225 * Makefile.in (make-gdb.tar.Z): Make the testsuite distribution
5226 files at the same time as the gdb base release distribution.
5230 * Makefile.in (check): Use individual check targets rather than
5236 * config.sub: Use sysv3.2 not sysv32 for canonical OS
5237 for System V release 3.2.
5241 * config.sub: Recognize hppaosf.
5242 * configure.in: Do configure ld/binutils/gas for it.
5246 * configure (tooldir): Alter syntax used to set this, for systems
5247 where "\$" isn't handled right, like i386-aix.
5251 * configure: Pass program-transform-name, not
5252 program_transform_name, to recursive configures.
5256 * Makefile.in (gas+binutils.tar.z): New rule for building snapshots
5261 * config.guess: Recognize AIX3.2 as distinct from 3.1.
5263 Sat Apr 17 17:19:50 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5265 * configure.in: rename m88k-motorola-m88kbcs to m88k-motorola-sysv
5267 * config/mh-delta88: remove extraneous GCC references
5271 * Makefile.in (PRMS): Set back to all-prms.
5275 * test-build.mk: Pass -with-gnu-as for known MIPS native and MIPS
5276 targets, rather than for MIPS hosts.
5278 Fri Apr 9 13:51:06 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5280 * configure.in: add comment for --with-x default values
5282 * config.guess: handle Motorola Delta88 box for SVR3 and SVR4.
5284 * Makefile.in: add check-* targets for each of the directories in
5285 the tree. Add a definition of RUNTEST that will use the one we
5286 just built, if it exists. Pass this down via FLAGS_TO_PASS.
5290 * configure.in: Removed obsolete references to bfd_target and
5291 target_makefile_frag.
5293 * build-all.mk: Set assorted targets for Q2.
5294 * config.sub: Recognize z8k-sim and h8300-hms.
5295 * test-build.mk: Really don't pass host to configure.
5296 (HOLES): Added uname.
5300 * configure: Handle an empty program-prefix, program-suffix or
5301 program-transform-name correctly.
5305 * build-all.mk: -G 8 no longer required for MIPS targets.
5306 * test-build.mk: Don't pass host argument to configure; make it
5311 * Makefile.in (gdb.tar.Z): Fix for building gzip'd distribution.
5312 * Makefile.in (COMPRESS): New macro, like GZIP.
5316 * test-build.mk: Use -with-gnu-as for mips-sgi-irix4 as well.
5318 * build-all.mk: Set GCC to gcc -O -G 8 for MIPS targets, since gcc
5319 with gas currently defaults to -G 0.
5323 * Makefile.in (all-flex): flex depends on byacc.
5325 * build-all.mk: If host not specified, use config.guess. Pass TAG
5326 to test-build.mk as RELEASE_TAG.
5327 * test-build.mk (configargs): New variable containing arguments to
5328 pass to configure. Set to -with-gnu-as on mips-dec-ultrix.
5329 (FLAGS_TO_PASS): Pass down RELEASE_TAG.
5331 * config.guess: Use /bin/uname when checking -X argument on SCO,
5332 to avoid invoking GNU uname which doesn't understand -X.
5334 * test-build.mk: Don't use /usr/unsupported/bin/as on AIX.
5336 * configure.in: Build gas for mips-*-*.
5340 * Makefile.in (all.normal): insert missing backslash.
5344 * build-all.mk, config/mh-irix4: Bump -XNh value to 1500 to match
5347 * Makefile.in: Complete overhaul to merge many almost identical
5352 * Makefile.in (setup-dirs-gdb): Renamed from setup-dirs.
5353 (gdb.tar.Z): Adjusted.
5355 * Makefile.in (setup-dirs, taz): New targets; should be general
5356 enough to adapt for gdb sometime. Build only .z file.
5357 (gas.tar.z): New target.
5361 * build-all.mk: Use CC=cc -Xs on Solaris.
5363 Mon Mar 29 19:59:26 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5365 * config/mh-sun3: cc needs -J to compile cp-parse.c correctly
5367 * config/mh-solaris: SunPRO C needs -Xs to be able to get a
5368 working xmakefile for Emacs.
5373 for handling BISON for FSF releases.
5377 * configure: Actually implement the change zoo just documented.
5379 Wed Mar 24 13:02:44 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5381 * configure: when using config.guess, only set target_alias when
5382 it's not already been set (ie, on the command line)
5384 Mon Mar 22 23:07:39 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5386 * Makefile.in: add installcheck target, set PRMS to install-prms
5388 Sun Mar 21 16:46:12 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5390 * configure: add support for package_makefile_fragment, handle the
5391 case where a directory has a configure.in file but no Makefile.in
5392 more gracefully (with an actual understandable error message, even);
5393 add support for --without (and add this to the usage message); also
5394 explicitly add a --host=${host_alias} to the command line when
5395 config.guess is used
5399 * configure: Must use both --host and --target in recursive calls.
5403 * Makefile.in: Change deja-gnu to dejagnu.
5407 * configure.in (h8300-*-*, h8500-*-*): Don't build libg++.
5409 Fri Mar 12 18:30:14 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5411 * configure.in: canonicalize all instances to *-*-solaris2*,
5412 also strip out a number of tools to not build for go32 host
5416 * config.guess: add GPL.
5418 * Makefile.in, config.guess, config.sub, configure: bump
5423 * Makefile.in (do-info): Removed obsolete check for existence of
5426 * Makefile.in (MAKEOVERRIDES): Define to be empty.
5428 Wed Mar 10 03:11:56 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5430 * Makefile.in: a couple of 'else true' for decstation,
5433 * configure.in: configure tclX too; don't remove Tk on RS/6000 anymore
5437 * Makefile.in (setup-dirs): change invocation of make to $(MAKE).
5439 Mon Mar 8 14:52:11 1993 Ken Raeburn (raeburn@cambridge)
5441 * config.guess: Recognize i386-ibm-aix (PS/2).
5442 * configure.in: Use config/mh-aix386 file for it.
5446 * Makefile.in (GCC_FOR_TARGET): Eliminated definition; use
5447 CC_FOR_TARGET instead.
5448 (BASE_FLAGS_TO_PASS): Pass GCC_FOR_TARGET=$(CC_FOR_TARGET).
5452 * Makefile.in: Add sim to list of directories sent with gdb
5456 * configure.in: Put back mips-dec-bsd* case.
5461 * configure.in (vax-*-ultrix2*): Add Ultrix 2.2 triplet.
5462 * config.guess: Change 'VAX*:ULTRIX:*:*' to 'VAX*:ULTRIX*:*:*'.
5463 * config/mh-vaxult2: New file.
5465 Tue Mar 2 18:11:03 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5467 * configure.in: remove no-op mips-dec-bsd* in "case $target"
5469 * Makefile.in (dir.info): only run gen-info-dir if it exists,
5470 (install-info): install dir.info only if it exists,
5471 (all-expect, install-expect): pass along X11_FLAGS_TO_PASS
5475 * configure.in: For vms target, skip bfd, ld, binutils. Do build
5476 gas for mips-dec-bsd.
5480 * configure (makesrcdir): If ${srcdir} is relative and not ".",
5481 and ${subdir} is not ".", set makesrcdir based on ${invsubdir}.
5485 * configure.in: Added "dejagnu" to hosttools list.
5489 * config.sub, configure.in, config.guess: Add support
5490 for Bosx, an AIX variant from Bull.
5495 * devo/dejagnu: Initial creation of devo/dejagnu.
5496 Migrated dejagnu testcases and support files for testing software
5497 tools to reside as subdirectories, currently called "testsuite",
5498 within the directory of the software tool. Migrated all programs,
5499 support libraries, etc. beloging to dejagnu proper from
5500 devo/deja-gnu to devo/dejagnu. These files were moved "as is"
5501 with no modifications. The changes to these files which will
5502 allow them to configure, build, and execute properly will be made
5507 * Makefile.in: Change send_pr to send-pr.
5508 * configure.in: Likewise.
5509 * send_pr: Renamed directory to send-pr.
5513 * Makefile.in: Add some extra semi-colons (needed if SHELL=bash).
5517 * README: Update for gdb-4.8 release.
5518 * Makefile.in (gdb.tar.Z): Add texinfo/tex3patch. Build
5519 gdb-xxx.tar.z (gzip'd) file also.
5521 Thu Feb 18 09:16:17 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5523 * Makefile.in: make all-diff depend on all-libiberty
5527 * config.guess: add vax-ultrix in the spirit of mips-ultrix.
5529 Tue Feb 16 05:57:15 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5531 * configure.in, Makefile.in: add hello, tar, gzip, recode, indent
5535 * Makefile.in (DEVO_SUPPORT): Remove etc directory
5536 (ETC_SUPPORT): Only add the files GDB wants from etc/.
5537 (gdb.tar.Z): Use ETC_SUPPORT. Use byacc when building the file.
5539 Thu Feb 11 20:14:28 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5541 * Makefile.in: makeinfo binary is in a new location
5545 * config.sub: Accept -ecoff as an OS.
5547 * Makefile.in: Various changes to eliminate a level of make
5548 recursion and reduce the required command line length.
5549 (BASE_FLAGS_TO_PASS): New variable holding flags passed to all
5551 (EXTRA_HOST_FLAGS, EXTRA_TARGET_FLAGS, EXTRA_GCC_FLAGS): New
5552 variables holding settings for specific sub-makes.
5553 (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS, GCC_FLAGS_TO_PASS): Rewrote
5554 in terms of BASE_FLAGS_TO_PASS.
5555 (TARGET_LIBS): New variable listing directories which use
5556 TARGET_FLAGS_TO_PASS.
5557 (subdir_do): Eliminated.
5558 (do-*): New set of targets to replace subdir_do.
5559 (various): All targets which used subdir_do now depend on do-*.
5560 (local-clean): Renamed from do_clean.
5561 (local-distclean): New target, dependency of distclean and
5563 (install-info): Don't create directories. Depend on dir.info
5564 rather than calling make recursively.
5565 (install-dir.info): Eliminated.
5566 (install-info-dirs): Create all info directories here.
5567 (dir.info): Depend upon do-install-info.
5569 * test-build.mk (HOLES): Added false.
5573 * config.guess: Recognize BSDI and BSDJ (Jolitz 386bsd).
5575 Thu Feb 4 20:49:18 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5577 * Makefile.in (info): remove dependency on all-texinfo. The
5578 problem was really in texinfo/C, not at this level.
5582 * Makefile.in (info): Added dependency on all-texinfo (PR 2112).
5586 * Makefile.in (make-gdb.tar.Z): Change BISON to 'bison -y' for
5591 * configure: Include srcdir in message about target of link not
5592 being found. Don't convert `-' to `_' in `with' options being
5595 Tue Feb 2 18:57:59 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5597 * configure.in: add uudecode to host_tools
5599 * Makefile.in: added {all,install}-uudecode targets, added them to
5600 the appropriate lists
5604 * Makefile.in (all-gcc): Added dependency on all-gas.
5606 * configure.in (mips-*-*): Build ld and binutils.
5610 * configure: check return code from mkdir, print error message and
5615 * Makefile.in (make-gdb.tar.Z): New location for texinfo.tex.
5619 * test-build.mk (HOLES): Added tar, cpio and uudecode.
5623 * config.sub (h8500): Recognize this as a cpu type.
5625 Sat Jan 23 20:32:01 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5627 * configure: source directory missing is no longer a warning
5629 * configure.in: recognize irix[34]* instead of irix[34]
5631 * Makefile.in: define and pass down X11_LIB
5633 * config/mh-sco: define X11_LIB to the mess that SCO ODT requires
5637 * guess-systype: Renamed to ...
5638 * config.guess: ... by popular request.
5639 * configure.in, Makefile.in: Update accordingly.
5644 + Add Convex, Cray/Unicos, and Encore/Multimax support.
5645 + Execute ./dummy instead of assuming . is in PATH.
5649 * guess-systype: New shell script. Attempts to guess the
5650 canonical host name of the executing host.
5651 Only a few hosts are supported so far.
5652 * configure: Call guess-systype if no host is specified.
5656 * Makefile.in (gcc-no-fixedincludes): Made to work with current
5662 * Makefile.in (GCC_FLAGS_TO_PASS): New variable.
5663 (all-gcc, install-gcc, subdir_do): Use it.
5667 * Makefile.in: Rename uninstalled gcc driver from gcc to xgcc.
5671 * Makefile.in: Removed explicit setting of SUBDIRS. SUBDIRS is now
5672 set exclusively by configure, using configure.in .
5674 Wed Jan 6 13:44:11 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5676 * test-build.mk: set $PATH for all builds
5678 * Makefile.in: pass TARGET_FLAGS_TO_PASS for xiberty and libm
5682 * Makefile.in (GCC_FOR_TARGET): Supply a default that matches
5683 the one used in gcc/Makefile.in, so that a null expansion doesn't
5684 override the one needed to build gcc with a native cc.
5689 * configure: Accept -with arguments.
5693 * Makefile.in: added h8300sim
5697 * config/mh-sco: Don't override BISON definition.
5699 * build-all.mk: If canonhost is i386-unknown-sco3.2v4, change it
5700 to i386-sco3.2v4. Set TARGETS and CFLAGS for i386-sco3.2v4.
5701 (all-cygnus, native, build-cygnus): Make
5702 $(canonhost)-stamp-3stage-done, not $(host)....
5703 * test-build.mk (stamp-3stage-compared): Use tail +10c for
5704 i386-sco3.2v4. Added else true to if command.
5708 * config.sub: (from FSF) Sequent uses a BSD-like OS.
5712 * configure.in (i[34]86-*-isc*): added; uses mh-sysv.
5714 Thu Dec 24 17:26:24 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5716 * configure.in: don't remove binutils from Solaris builds
5720 * Makefile.in: get rid of earlier definitions for *clean,
5721 also handle the recursive info rule better
5725 * Makefile.in (mostlyclean, distclean, realclean): Fix to
5726 do more-or-less the right thing.
5730 * Makefile.in: Add lines defining CC and CXX, and use CXX rather
5731 than gcc in definitions of CXX_FOR_BUILD and CXX_FOR_TARGET.
5733 Tue Dec 15 00:34:32 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5735 * Makefile.in: change all $(host_cpu)-$(host_vendor)-$(host_os) to
5738 * configure.in: split the configdirs list into 4 categories (native
5739 v. cross, library v. tool) and handle the cross-only and native-
5740 only in more reasonable (and correct!) way.
5742 Mon Dec 14 17:04:22 1992 Stu Grossman (grossman at cygnus.com)
5744 * configure.in (hppa*-*-*): Don't remove bfd and gdb from
5747 Sun Dec 13 00:37:26 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5749 * Makefile.in: extensive cleanup:: removed all of the explicit
5750 clean-* targets, collapsed many wrappers around subdir_do into
5751 one, added additional targets to satisfy standards.texi, deleted
5752 some old targets, some changes for consistency
5754 Fri Dec 11 20:18:02 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5756 * configure.in: handle some programs as cross-only, and others as
5759 * test-build.mk: handle partial holes in a more generic manner
5761 * Makefile.in: m4 depends on libiberty
5763 Mon Dec 7 06:43:27 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5765 * config/mh-sco: don't default $(CC) to gcc
5767 Thu Dec 3 21:52:11 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5769 * configure.in: add m4, textutils, fileutils, sed, shellutils,
5770 time, wdiff, and find to configdirs
5772 * Makefile.in: all, clean, and install rules for the new programs
5773 added to configure.in
5775 Mon Nov 30 14:54:34 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5777 * configure.in: use mh-sun for all *-sun-* hosts
5779 * config/mh-solaris: rework standard X location to use
5780 $OPENWINHOME, if defined.
5782 * config/mh-sun: handle X11 include locations
5784 * config/mh-decstation: define NeedFunctionPrototypes to 0, to
5785 work around dain-bramaged DECwindows include files
5787 Fri Nov 27 18:35:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5789 * Makefile.in: define flags for X11 include files and library file
5790 locations, pass them down to the programs that need this info
5792 * build-all.mk: added a 'native' target, to 3stage the native toolchain
5794 * config/{mh-hpux,mh-solaris}: define the "standard" locations for
5795 the vendor supplied X11 headers and libraries
5797 Sun Nov 22 18:59:13 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5799 * configure.in: start building libg++ for HP-UX targets
5803 * README: Update references to files moved into etc/.
5807 * config.sub (i386sol2, i486sol2): i[34]86-unknown-solaris2.
5808 * configure.in (i[34]86-*-solaris2*): Use config/mh-sysv4.
5812 * configure: accept dash as well as underscore in long option
5813 names for FSF compatibility.
5817 * config.sub: added -sco3.2v4 support from FSF.
5819 Sun Nov 8 21:14:30 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5821 * configure.in: expand the section that adds or removes
5822 directories from the list of programs to build, to handle native
5823 vs. cross in addition to host v. native
5827 * Makefile.in: Replace C++ in macro names with CXX.
5828 This is less likely to break ...
5830 Sat Nov 7 15:16:58 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5832 * test-build.mk: add -w to GNU_MAKE
5834 Fri Nov 6 23:10:37 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5836 * config.sub: remove 'sparc'-->'sparc-sun' default transformation,
5837 add 'sparc' to list of recognized cpus. This needed to make
5838 'sparc-aout' expand to 'sparc-unknown-aout' instead of 'sparc-sun-aout'.
5839 Delete some redundant ose68 variants. Recognize -wrs as an os,
5840 then changes that into $CPU-wrs-vxworks.
5842 * configure.in: remove most references to gdbtest, regularize
5843 target based program removal
5845 * test-build.mk: import from p3 tree (many fixes and changes)
5849 * Makefile.in: added rules to handle tcl, tk, and expect
5851 * configure.in: handle those directories if they exist
5853 Thu Nov 5 14:35:41 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5855 * config.sub: removed bogus hppabsd and hppahpux names, since
5856 "hppa" is not a valid cpu (hppa1.1 or hppa1.0 are, though)
5858 Thu Oct 29 00:12:41 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5860 * Makefile.in: all-gcc now depends on all-binutils. all-libg++
5861 depends upon all-xiberty
5863 * Makefile.in: changes from p3, including:
5867 * Makefile.in (XTRAFLAGS): include newlib directories if
5868 newlib/Makefile exists, rather than if host != target.
5872 * Makefile.in: added -nostdinc to XTRAFLAGS if we are using gcc
5873 from the same source tree and not building a cross-compiler. This
5874 matters for the libg++ configuration if reconfiguring a tree that
5875 has already been installed.
5879 * Makefile.in: added -I for newlib/targ-include to XTRAFLAGS, to
5880 pick up the machine and system specific header files.
5882 * Makefile.in: added AS_FOR_TARGET, passed down in
5883 TARGET_FLAGS_TO_PASS. Added CC_FOR_BUILD, which is intended to be
5884 the C compiler to use to create programs which are run in the
5885 build environment, set it to default to $(CC), and passed it down
5886 in FLAGS_TO_PASS and TARGET_FLAGS_TO_PASS.
5890 * Makefile.in: add $(host) = $(target) tests back to *_FOR_TARGET.
5891 We need them for unusual native builds, like systems without
5894 * configure: also define $(host_canonical) and
5895 $(target_canonical), which are the full, canonical names for the
5896 given host and target
5900 * Makefile.in: Added separate definitions for C++.
5904 * configure.in (configdirs): Add deja-gnu.
5908 * README: Update for configure.texi and gdb-4.7 release.
5912 * Makefile.in: Move "all" target to top of file.
5913 Previously, first target was ".PHONY" which caused BSD4.4 make
5914 to build .PHONY when make was run without arguments.
5918 * Makefile.in: Add COPYING.LIB to GDB releases, now that there's
5919 Library-copylefted code in libiberty.
5923 * config.sub: Replace m68kmote with plain old m68k.
5927 * Makefile.in: Remove space from blank line, avoid Make complaints.
5931 * config.sub: Complain if no argument is given. Added support for
5932 386bsd as OS and target alias.
5936 * Makefile.in (XTRAFLAGS): include newlib directories if
5937 newlib/Makefile exists, rather than if host != target.
5939 Mon Oct 5 03:00:09 1992 Mark Eichin (eichin at tweedledumber.cygnus.com)
5941 * config.sub: recognize sparclite-wrs-vxworks.
5943 * Makefile.in (install-xiberty): added *-xiberty make rules (from
5944 p3.) Added clean-xiberty to clean.
5946 Thu Oct 1 17:59:19 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5948 * configure.in: use *-*-* instead of nested cases for host and target
5952 * Makefile.in: added -nostdinc to XTRAFLAGS if we are using gcc
5953 from the same source tree and not building a cross-compiler. This
5954 matters for the libg++ configuration if reconfiguring a tree that
5955 has already been installed.
5959 * config.sub (i486v/i486v4): Merge in from FSF version.
5963 * configure: only set PWD if it is already set.
5967 * configure: just set PWD=`pwd` at the top, since Ultrix sh
5968 doesn't have unset and all success paths (and most error paths)
5969 out set it anyway. (Note: should change all uses of ${PWD=`pwd`}
5970 to just ${PWD} to avoid confusion.)
5974 * configure: always set $(tooldir) to $(libdir)/$(target_alias),
5975 even for a native compilation.
5979 Changes to make the gdb.tar.Z rule work better.
5981 * Makefile.in (GDB_SUPPORT_DIRS): Add opcodes.
5982 (DEVO_SUPPORT): Add configure.texi.
5983 (bfd-ilrt.tar.Z): Remove ancient rule.
5987 * Makefile.in: added -I for newlib/targ-include to XTRAFLAGS, to
5988 pick up the machine and system specific header files.
5990 * configure.in, config.sub: added new target m68010-adobe-scout,
5991 with alias of adobe68k. Changed configure.in to check for
5992 -scout before -sco* to avoid a false match.
5994 * Makefile.in: added AS_FOR_TARGET, passed down in
5995 TARGET_FLAGS_TO_PASS. Added CC_FOR_BUILD, which is intended to be
5996 the C compiler to use to create programs which are run in the
5997 build environment, set it to default to $(CC), and passed it down
5998 in FLAGS_TO_PASS and TARGET_FLAGS_TO_PASS.
6002 * Makefile.in: added TARGET_FLAGS_TO_PASS, CC_FOR_TARGET,
6003 AR_FOR_TARGET, RANLIB_FOR_TARGET, NM_FOR_TARGET. Pass
6004 TARGET_FLAGS_TO_PASS, which defines CC, AR, RANLIB and NM as the
6005 FOR_TARGET variants, to newlib and libg++.
6009 * Makefile.in (all-gas, all-gdb): Require all-opcodes to be built
6014 * config.sub: Accept `elf' as an environment.
6018 * Makefile.in (all-opcodes): cd into the right directory
6022 * configure: added -program_transform_name option, used as
6023 argument to sed when installing programs.
6024 configure.texi: added documentation for -program_prefix,
6025 -program_suffix and -program_transform_name.
6029 * config.sub: Accept i486 where i386 ok.
6033 * config.sub: accept we32k
6037 * config.sub, configure.in: accept OSE68000 and OSE68k.
6039 * Makefile.in: don't create all directories for ``make install'';
6040 let the subdirectories create the ones they need.
6042 Tue Aug 11 23:13:17 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
6044 * COPYING: new file, GPL v2
6046 Tue Aug 4 01:12:43 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
6048 * Makefile.in: use the new gen-info-dir, which needs a template
6049 argument (which also lives in texinfo)
6051 * configure.texi, standards.texi: fix INFO-DIR-ENTRY
6053 Mon Aug 3 15:41:28 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
6055 * config/mh-solaris: removed the -xs from CFLAGS (let the people
6056 with Sun's C compiler deal with it themselved)
6060 * config.sub (ncr3000): Change i386 to i486.
6062 Thu Jul 23 00:12:17 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
6064 * Makefile.in: add install-rcs, install-grep to
6065 install-no-fixedincludes, removed install-bison and install-libgcc
6069 * configure.in: grab the HPUX makefile fragment if on HPUX
6073 * Makefile.in: eradicate bison spoor (ditto libgcc).
6074 configure.in: recognise m68{k,000}-ericsson-OSE.
6075 es1800 is alias for m68k-ericsson-OSE
6077 Sun Jul 19 17:49:02 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
6079 * configure.in: rearrange the parts that remove programs from
6080 configdirs, based now on HOST==TARGET or by canonical triple.
6084 * test-build.mk: recurse explicitly with -f test-build.mk when
6085 appropriate. predicate stage3 and comparison on the existence
6086 of gcc. That is, if gcc isn't around, we aren't three-staging.
6087 On very clean, also remove ...stamp-co. Build in-place before
6092 * Makefile.in, configure.in: add tgas
6096 * Makefile.in: a number of changes merged in from progressive.
6098 * configure.in: add libm.
6100 * .cvsignore: ignore some stuff that comes from test-build.mk.
6102 Wed Jul 8 00:01:30 1992 Stu Grossman (grossman at cygnus.com)
6104 * config/mh-solaris: Use -xs when compiling so that Sun-C puts
6105 a symbol-table into the executable.
6109 * config.sub: Add es1800 (m68k-ericsson-es1800).
6113 * configure: Add program_suffix (parallel to program_prefix)
6114 * Makefile.in: adjust directory-creating script for losing decstation
6118 * configure: Minor $subdir-related fixes.
6122 * configure: fix various problems with propogating
6123 makefile_target_frag in subdirs.
6124 * configure.in: config libgcc if its there
6126 Fri Jun 19 15:19:40 1992 Stu Grossman (grossman at cygnus.com)
6128 * config.sub: HPPA merge.
6132 * config/mh-ncr3000 (INSTALL): Don't use /usr/ucb/install,
6133 it is broken on ncr 3000's.
6135 Sun Jun 14 10:29:19 1992 John Gilmore (gnu at cygnus.com)
6137 * Makefile.in: Replace all-bison with all-byacc in all
6138 dependency lines for other tools (which now use byacc).
6140 Fri Jun 12 22:21:57 1992 John Gilmore (gnu at cygnus.com)
6142 * config.sub: Add sun4sol2 => sparc-sun-solaris2.
6144 Tue Jun 9 17:18:11 1992 Fred Fish (fnf at cygnus.com)
6146 * config/{mh-ncr3000, mh-sysv4}: Add INSTALL.
6150 * Makefile.in: make gprof rules similar to byacc rules (instead of
6151 vestigal $(unsubdir) that didn't work...)
6155 * config.sub: Add support for Linux.
6156 * Makefile.in: Use $(FLAGS_TO_PASS) more consistently
6157 (at least for libg++).
6161 * configure.texi: fix doc for the -nfp option to configure
6165 * Makefile.in (all-binutils): ar needs flex, so depend on all-flex.
6167 Sun May 31 15:04:08 1992 Mark Eichin (eichin at cygnus.com)
6169 * config.sub: changed [^-]+ to [^-][^-]* so that it works under
6170 Sun sed. (BSD 4.3 sed doesn't handle [^-]+ either.)
6171 * configure.in: added solaris* host_makefile_frag hook.
6173 Sun May 31 01:10:34 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
6175 * config.sub: changed recognition of m68000 so that various
6176 m68k types can be specified via m680[01234]0
6178 Sat May 30 21:01:06 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
6180 * config.sub (basic_machine): fix sed so that '-foo' isn't
6181 completely substituted out while .+'-foo' loses the '-foo'
6185 * config.sub ($os): Add -aout.
6189 * configure: If host_makefile_frag is absolute, don't
6190 prefix ${invsubdir} (relevant to libg++ auto-configure).
6194 * Makefile.in (tooldir): Define it.
6195 (all-ld): Depend on all-flex.
6199 * Makefile.in (check): Fix libg++ special case.
6203 * configure: do not bury `pwd` into config.status, thus do fewer
6206 * configure: print the "Building in" message only when building in
6207 other than "." AND verbose.
6209 * configure: remove -s, rework -v to better accomodate guested
6212 * standards.texi: updated to 3 may, fixed librid <-> libdir typo.
6216 * Makefile.in: macroize flags passed on recursion. remove
6221 * configure: get makesrcdir right for subdirs deeper than 1.
6223 * Makefile.in: pass INSTALL, INSTALL_DATA, INSTALL_PROGRAM on
6228 * Makefile.in: don't print subdir_do or recursion lines.
6232 * standards.texi: added menu item.
6234 * Makefile.in: build and install standards.info.
6236 * standards.texi: new file.
6240 * configure: test for and move config.status pieces from
6245 * config/mh-delta88, config/mh-ncr3000: Replace MINUS_G with
6246 CFLAGS per new configuration strategy.
6247 * configure: Test for existance of files before trying to mv
6248 them, to avoid numerous non-existance messages.
6252 * configure: correct final line of config.status.
6254 * configure: patch from eggert. Avoids a protection problem if
6255 the original Makefile.in is read only.
6257 * configure: use move-if-change from gcc to create config.status.
6258 Some makefiles depend on config.status to tell if a directory
6259 has been reconfigured for a different host. This change
6260 prevents those directories from remaking everything in the case
6261 where the reconfig was only intended to rebuild a Makefile.
6263 * configure: test for config.sub with "config.sub sun4" rather
6264 than "config.sub ${host_alias}". Otherwise we can't tell a bad
6265 host alias from a missing config.sub.
6269 * Makefile.in: explicitly pass CFLAGS on recursion. no longer pass
6270 MINUS_G (this can be done with CFLAGS). Default CFLAGS to -g.
6274 * configure: mkdir ${subdir} as needed.
6278 * Makefile.in,configure.in: added autoconf.
6282 * Makefile.in: no longer pass against on recursion.
6284 * Makefile.in: added .NOEXPORT: so that stray makefile_frag
6285 definitions are not inherited.
6287 * configure: correct makesrcdir when subdir is .
6291 * configure: Add support for 'subdirs' variable, which is
6292 like 'configdirs', except that configure doesn't re-invoke
6293 itself for subdirs, it just creates a Makefile for each subdir.
6294 * configure.texi: Document subdirs.
6296 Mon Apr 13 18:50:16 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
6298 * configure.in: added flex to configdirs
6302 * Makefile.in: remove clean-stamps from clean.
6304 Sat Apr 11 03:52:03 1992 John Gilmore (gnu at cygnus.com)
6306 * configure.in: Add gdbtest to configdirs.
6310 * Makefile.in (MINUS_G): Add macro, default to -g, pass on
6312 * configure.in: Recognize new ncr3000 config.
6316 * Makefile.in, configure.in: removed references to gdbm.
6320 * config.sub: Don't canonicalize os value
6321 newsos* to bsd (readline needs to check for newsos).
6322 (This fix was earlier made Jan 31, but got re-broken.)
6324 Mon Apr 6 14:34:08 1992 Stu Grossman (grossman at cygnus.com)
6326 * configure.in: sco is an os, not a vendor!
6328 * configure: Quote $( better. Keep various shells happy.
6332 * Makefile.in: eliminate stamp-files.
6336 * Makefile.in: add send_pr. remove "force" from .stmp-gprof rule.
6337 Supress echoing of all the "if [ -d ... $(MAKE)" lines.
6341 * config.sub: fix iris/iris3.
6345 * configure: re-add -rm.
6349 * Maskefile.in: add .stmp-rcs to all.
6351 * configure.in: remove gas from rs6000 build, use aix host fragment.
6355 * configure: pass down site_option during recursion.
6357 Thu Mar 19 16:49:36 1992 Stu Grossman (grossman at cygnus.com)
6359 * Makefile.in (all.cross): Add .stmp-bfd .stmp-readline.
6363 * configure: Change exec_prefix so that it really defaults to prefix.
6367 * Makefile.in, configure.in: Add support for mmalloc library.
6371 * Makefile.in: add stmp dependencies for a few more things.
6375 * configure: adjusted error message on objdir/srcdir configure
6376 collision, per john's suggestion.
6378 * Makefile.in: add libiberty stmp to all and all.cross.
6382 * Makefile.in: remove force dependencies, add grep to all.
6386 * Makefile.in: drop flex. make stamp files work.
6388 * configure: added test for conflicting configuration in srcdir,
6389 remove trailing slashes from srcdir. Otherwise emacs gdb mode
6390 gets cranky. use relative paths for configure and srcdir
6391 whenever possible. Send some error messages to stderr that were
6396 * Makefile.in: Fix libg++ rule to check for gcc directory
6397 before using gcc/gcc. Also pass XTRAFLAGS.
6399 Thu Mar 5 21:45:07 1992 K. Richard Pixley (rich@sendai)
6401 * Makefile.in: added stmp-files so that directories aren't polled
6402 when they are already built.
6404 * configure.texi: fixed a node pointer problem.
6406 Thu Mar 5 12:05:58 1992 Stu Grossman (grossman at cygnus.com)
6408 * config.sub configure.in config/mh-irix4 gdb/configure.in
6409 gdb/mips-tdep.c gdb/mipsread.c gdb/procfs.c gdb/signame.h
6410 gdb/tm-irix3.h gdb/tm-mips.h gdb/xm-irix4.h gdb/config/mt-irix3
6411 gdb/config/mh-irix4 texinfo/configure.in: Port to SGI Irix-4.x.
6415 * configure: -recurring becomes -silent. corrected help message
6418 * Makefile.in: mkdir $(exec_prefix) and $(tooldir).
6422 * configure: when building Makefile for crosses, replace
6423 tooldir and program_prefix. default srcdir from location of
6424 config.sub. remove "for host in hosts" and "for target in
6429 * Makefile.in: Do not pass bindir or mandir to cvs.
6433 * Makefile.in, configure.in: removed traces of namesubdir,
6434 -subdirs, $(subdir), $(unsubdir), some rcs triggers. Forced
6435 copyrights to '92, changed some from Cygnus to FSF.
6437 * configure.texi: remove most references to multiple hosts,
6438 multiple targets, subdirs, etc.
6440 * configure.man: removed rcsid. reference config.sub not
6443 * Makefile.in: mkdir $(infodir) on install-info.
6445 Wed Feb 19 15:41:13 1992 John Gilmore (gnu at cygnus.com)
6447 * configure.texi: Explain better about .gdbinit and about
6448 the environment that configure.in sections run in.
6450 Fri Feb 7 07:55:00 1992 John Gilmore (gnu at cygnus.com)
6452 * configure.in: Ultrix is only a decstation if it's a MIPS.
6454 Fri Jan 31 21:54:51 1992 John Gilmore (gnu at cygnus.com)
6456 * README: DOC.configure => cfg-paper.texi.
6458 Fri Jan 31 21:48:18 1992 Stu Grossman (grossman at cygnus.com)
6460 * config.sub (near case $os): Don't convert newsos* to bsd!
6462 Fri Jan 31 02:27:32 1992 John Gilmore (gnu at cygnus.com)
6464 * Makefile.in: Reinstall change from gdb-4.3 that reduces
6465 the number of copies of COPYING that go into the GDB tar file.
6467 Thu Jan 30 16:17:30 1992 Stu Grossman (grossman at cygnus.com)
6469 * bfd/configure.in, config/mh-sco, gdb/config/mh-i386sco,
6470 gdb/config/mt-i386v32, gdb/configure.in, readline/configure.in:
6471 Fix SCO configuration stuff.
6473 Tue Jan 28 23:51:07 1992 Per Bothner (bothner at cygnus.com)
6475 * Makefile.in: For libg++, make sure the -I pointing
6476 to the gcc directory goes *after* all the libg++-local -I flags.
6477 Also, move just-gcc dependency from just-libg++ to all-libg++.
6479 Tue Jan 28 12:56:24 1992 Stu Grossman (grossman at cygnus.com)
6481 * configure: Change -x to -f to keep Ultrix /bin/test happy.
6483 Sat Jan 18 17:45:11 1992 Stu Grossman (grossman at cygnus.com)
6485 * Makefile.in (make-gdb.tar.Z): Remove texinfo targets.
6487 Sat Jan 18 17:03:21 1992 Fred Fish (fnf at cygnus.com)
6489 * config.sub: Add stratus configuration frags. Also
6492 Sat Jan 18 15:35:29 1992 Stu Grossman (grossman at cygnus.com)
6494 * Makefile.in (DEV_SUPPORT): add configure.man.
6496 * config.sub(Decode manufacturer-specific): add -none*.
6498 Fri Jan 17 17:58:05 1992 Stu Grossman (grossman at cygnus.com)
6500 * Makefile.in: remove form feeds to make Sun's make happy.
6501 (DEVO_SUPPORT): DOC.configure => cfg-paper.texi.
6503 Sat Jan 4 16:11:44 1992 John Gilmore (gnu at cygnus.com)
6505 * Makefile.in (AR_FLAGS): Make quieter.
6507 Thu Jan 2 22:57:12 1992 John Gilmore (gnu at cygnus.com)
6509 * configure.in: Add libg++.
6510 * configure: When verbose, don't output the command line at each
6511 level; it will be unremarkably the same as the previous version,
6512 which will be the same as what the user typed.
6514 Fri Dec 27 16:26:47 1991 K. Richard Pixley (rich at cygnus.com)
6516 * configure.in, Makefile.in: fix clean-info, add flex. add
6519 * configure: be less sensitive to spaces in Makefile.in. Do not
6520 look for sources in "..". Doing so breaks subdirectories that
6521 might have their own configure. If a subdir has it's own
6522 configure script, use it.
6524 Thu Dec 26 16:30:26 1991 K. Richard Pixley (rich at cygnus.com)
6526 * cfg-paper.texi: some changes suggested by rms.
6528 Thu Dec 26 10:13:36 1991 Fred Fish (fnf at cygnus.com)
6530 * config.sub: Merge in some small additions from the FSF version,
6531 taken from the gcc distribution, to bring the Cygnus and FSF
6532 versions into closer sync.
6534 Fri Dec 20 11:34:18 1991 Fred Fish (fnf at cygnus.com)
6536 * configure.in: Changed svr4 references to sysv4.
6538 Thu Dec 19 15:54:29 1991 K. Richard Pixley (rich at cygnus.com)
6540 * configure: added -V for version number option.
6542 Wed Dec 18 15:39:34 1991 K. Richard Pixley (rich at cygnus.com)
6544 * DOC.configure, cfg-paper.texi: revised, updated, and texinfo'd.
6545 renamed from DOC.configure to cfg-paper.texi.
6547 Mon Dec 16 23:05:19 1991 K. Richard Pixley (rich at rtl.cygnus.com)
6549 * configure, config.subr, config.sub: config.subr is now
6552 Fri Dec 13 01:17:06 1991 K. Richard Pixley (rich at cygnus.com)
6554 * configure.texi: new file, in progress.
6556 * Makefile.in: build info file and install the man page for
6559 * configure.man: new file, first cut.
6561 * configure: find config.subr again now that configuration "none"
6562 has gone. removed all traces of the -ansi option. removed all
6563 traces of the -languages option.
6565 * config.subr: resync from rms.
6567 Wed Dec 11 22:25:20 1991 K. Richard Pixley (rich at rtl.cygnus.com)
6569 * configure, config.sub, config.subr: merge config.sub into
6570 config.subr, call the result config.subr, remove config.sub, use
6573 * Makefile.in: revised install for dir.info.
6575 Tue Dec 10 00:04:35 1991 K. Richard Pixley (rich at rtl.cygnus.com)
6577 * configure.in: add decstation host makefile frag.
6579 * Makefile.in: BISON now bison -y again. also install-gcc on
6580 install. clean-gdbm on clean. infodir belongs in datadir.
6581 Make directories for info install. Build dir.info here then
6584 Mon Dec 9 16:48:33 1991 K. Richard Pixley (rich at rtl.cygnus.com)
6586 * Makefile.in: fix for bad directory tests.
6588 Sat Dec 7 00:17:01 1991 K. Richard Pixley (rich at rtl.cygnus.com)
6590 * configure: \{1,2\} appears to be a sysv'ism. Use a different
6591 regexp. -srcdir relative was being handled incorrectly.
6593 * Makefile.in: unwrapped some for loops so that parallel makes
6594 work again and so one can focus one's attention on a particular
6597 Fri Dec 6 00:22:08 1991 K. Richard Pixley (rich at rtl.cygnus.com)
6599 * configure: added PWD as a stand in for `pwd` (for speed). use
6600 elif wherever possible. make -srcdir work without -objdir.
6601 -objdir= commented out.
6603 Thu Dec 5 22:46:52 1991 K. Richard Pixley (rich at rtl.cygnus.com)
6605 * configure: +options become --options. -subdirs commented out.
6606 added -host, -datadir. Renamed -destdir to -prefix. Comment in
6607 Makefile now at top of generated Makefile. Removed cvs log
6608 entries. added -srcdir. create .gdbinit only if there is one
6611 * Makefile.in: idestdir and ddestdir go away. Added copyrights
6612 and shift gpl to v2. Added ChangeLog if it didn't exist. docdir
6613 and mandir now keyed off datadir by default.
6615 Fri Nov 22 07:38:11 1991 K. Richard Pixley (rich at rtl.cygnus.com)
6617 * Freshly created ChangeLog.
6624 version-control: never