3 * Makefile.in (INSTALL_PROGRAM_ARGS): New variable.
4 (INSTALL_PROGRAM): Use $(INSTALL_PROGRAM_ARGS).
5 (INSTALL_SCRIPT): New variable.
6 (BASE_FLAGS_TO_PASS): Pass down INSTALL_SCRIPT.
7 * configure.in: If host is *-*-cygwin32*, set INSTALL_PROGRAM_ARGS
9 * install-sh: Add support for -x option.
13 * configure.in, Makefile.in: Treat tix like itcl.
17 * Makefile.in (WINDRES): New variable.
18 (WINDRES_FOR_TARGET): New variable.
19 (BASE_FLAGS_TO_PASS): Add WINDRES_FOR_TARGET.
20 (EXTRA_HOST_FLAGS): Add WINDRES.
21 (EXTRA_TARGET_FLAGS): Add WINDRES.
22 (EXTRA_GCC_FLAGS): Add WINDRES.
23 ($(DO_X)): Pass down WINDRES.
24 ($(CONFIGURE_TARGET_MODULES)): Set WINDRES when configuring.
25 * configure: Treat WINDRES like DLLTOOL, and WINDRES_FOR_TARGET like
30 * configure.in: configure sim before gdb for win32-x-ppc
34 Move gperf into the toplevel, from libg++.
35 * configure.in (target_tools): Add target-gperf.
36 (native_only): Add target-gperf.
37 * Makefile.in (all-target-gperf): New target, depend on
39 (configure-target-gperf): Empty rule.
40 (ALL_TARGET_MODULES): Add all-target-gperf.
41 (CONFIGURE_TARGET_MODULES): Add configure-target-gperf.
42 (CHECK_TARGET_MODULES): Add check-target-gperf.
43 (INSTALL_TARGET_MODULES): Add install-target-gperf.
44 (CLEAN_TARGET_MODULES): Add clean-target-gperf.
48 * config.sub (mn10200): Recognize new basic machine.
52 * configure.in: Don't set ENABLE_MULTILIB, so we'll be passing
53 --enable-multilib down to subdirs; setting TARGET_SUBDIR was enough.
57 * configure.in: If we're building mips-sgi-irix6* native, turn on
58 ENABLE_MULTILIB and set TARGET_SUBDIR.
62 * Makefile.in (all-sn): Depend on all-grep.
66 * configure.in: Use mh-ppcpic and mt-ppcpic for powerpc*-* targets.
68 * configure: Set CFLAGS and CXXFLAGS, and substitute them into
70 * Makefile.in: Add comment for CFLAGS and CXXFLAGS.
72 * Makefile.in (DISTBISONFILES): Remove.
73 (taz): Don't futz with DISTBISONFILES. Change BISON to use
76 * configure.in: Build itl, db, sn, etc., when building for native
79 * Makefile.in (LD): New variable.
80 (EXTRA_HOST_FLAGS): Pass down LD.
85 * Makefile.in (INSTALL): Use $(SHELL) when executing install-sh.
89 * configure.in (targargs): Strip out any supplied --build argument
90 before adding our own. Always add --build.
94 * configure.in (targargs): Pass --build if we're doing
99 * configure: Use '|' instead of ":" as the seperator in
100 sed. Otherwise sed chokes on NT path names with drive
101 designators. Also look for "?:*" as the leading characters in an
106 * config.sub: Support for r3900.
110 * configure.in: Use install-sh, not install.sh.
114 * Makefile.in (taz): Improve check for BISON so it doesn't try to
119 * Makefile.in (INSTALL_MODULES): Put install-opcodes before
124 * Makefile.in: Add automake targets.
125 * configure.in (host_tools): Add automake.
130 * Makefile.in (all-libide): Depend upon all-ilu.
135 * configure: Default CXX to c++, not gcc.
136 * Makefile.in (CXX): Set to c++, not gcc.
137 (CXX_FOR_TARGET): When cross, transform c++, not gcc.
142 * Makefile.in: Add ILU targets.
143 * configure.in (host_tools): Add ILU.
148 * install-sh: try appending a .exe if source file doesn't
153 * configure.in: Turn on multilib by default.
154 (cross_only): Remove target-libiberty.
156 * Makefile.in (all-gcc): Don't depend on libiberty.
161 * configure.in (host_tools): Added vmake.
166 * config.guess: improve algorithm for recognizing Gnu Hurd x86.
170 * Makefile.in (DEVO_SUPPORT): Add mpw-install.
171 (DISTBISONFILES): Add ld/Makefile.in
175 * configure.in: if target is cygwin32 but host isn't cygwin32,
176 don't configure gdb tcl tk expect, not just gdb.
180 * configure.in: Added gnuserv everywhere sn appears.
182 * Makefile.in (ALL_MODULES): Added all-gnuserv.
183 (CROSS_CHECK_MODULES): Added check-gnuserv.
184 (INSTALL_MODULES): Added install-gnuserv.
185 (CLEAN_MODULES): Added clean-gnuserv.
186 (all-gnuserv): New target.
191 * configure.in (host_libs): Added libide.
192 Skip libide, vmake if no X. Also skip these everywhere that sn is
195 * Makefile.in (ALL_MODULES): Added all-vmake, all-libide.
196 (CROSS_CHECK_MODULES): Added check-vmake, check-libide.
197 (INSTALL_MODULES): Added install-vmake, install-libide.
198 (CLEAN_MODULES): Added clean-vmake, clean-libide.
199 (all-vmake, all-libide): New targets.
204 * config.guess: Fixes for MIPS OpenBSD systems.
208 * Makefile.in (INSTALL_XFORM): Remove.
209 (BASE_FLAGS_TO_PASS): Remove INSTALL_XFORM.
211 * mkinstalldirs: New file, copied from automake.
212 * Makefile.in (installdirs): Rename from install-dirs. Use
213 mkinstalldirs. Change all users.
214 (DEVO_SUPPORT): Add mkinstalldirs.
218 * install-sh: Rename from install.sh.
219 * Makefile.in (INSTALL): Change install.sh to install-sh.
220 (DEVO_SUPPORT): Likewise.
222 * configure: Use ${config_shell} with ${moveifchange}. From Thomas
227 * config.guess: Recognize OpenBSD systems correctly.
231 * README, Makefile.in (ETC_SUPPORT): Remove references to
232 cfg-paper*, configure.{texi,man,info*}._
236 * Makefile.in (all.normal): Ensure that gcc is built after all
237 the x11 - ie gdb - targets.
241 * makefile.vms: Don't run conf-a-gas.
245 * configure.in (hppa1.1-*-rtems*): New target, like hppa-*-*elf*.
250 * configure.in: Remove noconfigdirs case since gdb also
251 configures and builds for tic80-coff.
256 * configure: Set cache_file to config.cache.
257 * Makefile.in (local-distclean): Remove config.cache.
261 * COPYING: Update FSF address.
266 * configure.in (tic80-*-*): Remove G++ libraries and libgloss from
272 * Makefile.in (install-dirs): Don't crash if prefix, and hence
277 * config.sub: Tweak mn10300 entry.
281 * configure.in (host_tools): Put sim before gdb, so gdb's
282 configure.tgt can determine if the simulator was configured.
286 * config.sub: Move BeOS $os case to be with other Cygnus
291 * config.sub: Remove misplaced comment that broke Linux.
295 * config.sub: Add BeOS support.
299 * Makefile.in (CHECK_X11_MODULES): Don't run check-tk.
303 * configure.in (noconfigdirs): Remove tcl and tk from
304 noconfigdirs for cygwin32 builds.
309 * configure.in (tic80-*-*): Remove ld from noconfigdirs.
314 * Makefile.in (GAS_SUPPORT_DIRS, BINUTILS_SUPPORT_DIRS): Remove
315 make-all.com, use makefile.vms instead.
319 * config.sub: Accept -lnews*.
324 * configure.in (noconfigdirs): Disable target-newlib,
325 target-examples and target-libiberty for d30v.
331 * configure.in (host_libs): Build itcl after tcl, tk.
333 * configure.in (host_libs): Added db, itcl.
334 (host_tools): Added sn.
335 (noconfigdirs): Added itcl, db, sn in appropriate places.
336 (native_only): Added sn.
338 * Makefile.in (all-db, all-sn): New targets.
339 (ALL_MODULES): Added all-sn.
340 (CROSS_CHECK_MODULES): Added check-sn.
341 (INSTALL_MODULES): Added install-sn.
342 (CLEAN_MODULES): Added clean-sn.
348 * configure.in (noconfigdirs): Enable ld for d30v.
354 * configure.in (tic80-*-*): Build compiler.
360 * configure.in (d30v-*): Remove sim directory from list of
361 unsupported d30v directories
367 * config.sub, configure.in: Add d30v target cpu.
372 * makefile.vms: New file.
373 * make-all.com: Remove.
377 * Makefile.in (EXTRA_GCC_FLAGS): Add LIBGCC2_DEBUG_CFLAGS.
382 * config.sub, configure.in: add r5900
387 * Makefile.in (all-itcl): The rule is all-itcl, not all-tcl.
391 * Makefile.in (ALL_MODULES): Added all-db.
392 (CROSS_CHECK_MODULES): Addec check-db.
393 (INSTALL_MODULES): Added install-db.
394 (CLEAN_MODULES): Added clean-db.
398 * config.guess: Merge with latest FSF sources.
402 * Makefile.in (ALL_MODULES): Added all-itcl.
403 (CROSS_CHECK_MODULES): Added check-itcl.
404 (INSTALL_MODULES): Added install-itcl.
405 (CLEAN_MODULES): Added clean-itcl.
409 * configure.in: build gdb for mn10200
413 * Makefile.in (all-target-winsup): Depend on all-target-libio.
418 * configure.in (tic80-*-*): Turn off most targets right now.
423 * Makefile.in (MAKEINFO): Check for the existence of the Makefile,
424 rather than the makeinfo program.
425 (do-info): Depend upon all-texinfo.
429 * configure.in: Remove uses of config/mh-linux.
431 * config.sub, config.guess: Merge with latest FSF sources.
436 * config.sub (case $basic_machine): Add tic80 entries.
441 * config.sub, config.guess: Merge with latest FSF sources.
445 * mpw-build.in: Build ld before gcc, use NewFolderRecursive.
446 * mpw-config.in: Test for NewFolderRecursive.
447 * mpw-install: Use symbolic name for startup filename.
448 * mpw-README: Add various additional details.
452 * configure.in (mips*-sgi-irix6*): Remove binutils from noconfigdirs.
456 * configure.in: Do build gcc and the target libraries for
461 * configure.in: don't avoid building gdb for mn10300 any more
462 * Makefile.in: double-quote GCC_FOR_TARGET line in EXTRA_GCC_FLAGS
463 instead of single-quoting it.
467 * configure.in: Don't use --with-stabs on IRIX 6.
471 * configure.in (m32r): Build gdb, libg++ now.
475 * configure.in (mips*-sgi-irix6*): Remove gdb and related
476 directories from noconfigdirs.
480 * config.sub (basic_machine): added mips16 configuration
484 * config.sub: Handle d10v-unknown.
489 * gcc/depragmaize.c: Handle MSDOS's (non-unix) text files.
493 * config.sub: Handle v850-unknown.
498 * Makefile.in: add findutils
499 * configure.in: add findutils to list of host_tools
503 * config.sub: Handle mn10200 and mn10300.
507 * configure.in (d10v-*): Do not build librx.
511 * configure.in (mn10300): Build everything except gdb & libgloss.
515 * config.guess: Patch for Dansk Data Elektronik servers,
518 For ncr, use /bin/uname rather than uname, since GNU uname does not
521 Patch for MIPS R4000 running System V,
524 Fix thinko for nextstep.
529 * config.guess: Guess mips-dec-mach_bsd4.3.
532 * config.guess (i?86-ncr-sysv*): Emit just enough of the minor
534 * config.guess (mips-mips-riscos*): Emit just enough of the
538 * config.guess (sparc-auspex-sunos*): Added.
539 (f300-fujitsu-*): Added.
542 * config.guess: Recognize a Tadpole as a sparc.
546 * config.guess: Don't assume that NextStep version is either 2 or
547 3. NextStep 4 (aka OpenStep 4) has come out now.
551 * config.guess: Support Cray T90 that reports itself as "CRAY TS".
556 * config.sub: Contributions from bug-gnu-utils to:
557 Support plain "hppa" (no version given) architecture, reported by
560 LynxOs is not a hardware supplier.
562 * config.guess: Contributions from bug-gnu-utils to add support for:
565 More Pyramid systems.
566 i[n>4]86 Intel chips.
567 M680[n>4]0 Motorola chips.
568 Use unknown instead of lynx for hardware manufacturer.
572 * install.sh (chmodcmd): Set to null if the DST directory already
577 * configure.in (powerpc*-{eabi,elf,linux,rtem,sysv,solaris}*): Do
578 not use mt-ppc target Makefile fragment any more.
582 * configure.in (*-*-windows): Exclude everything but those dirs
583 needed to build windows.
587 * Makefile.in (all-target-winsup): Depend on all-target-librx.
591 * configure.in: Exclude mmalloc from i386-windows.
592 * config/mh-windows: Add rules for building MSVC makefiles.
596 * Undo my previous change.
600 * Makefile.in (EXTRA_GCC_FLAGS): Pass down GCC_FOR_TARGET
602 (MAKEOVERRIDES): Define (revert this part of October 18 change).
606 * Makefile.in (FLAGS_TO_PASS): Add $(HOST_FLAGS) to allow the
607 host to add it's own flags.
608 * config/mh-windows (HOST_FLAGS): Set srcroot, which is needed
609 for MSVC build procedure.
613 * configure: Handle GCC_FOR_TARGET like CC_FOR_TARGET.
617 * Makefile.in (CC_FOR_TARGET): Check for xgcc, not Makefile.
618 (CXX_FOR_TARGET): Likewise.
619 (GCC_FOR_TARGET): Define.
620 (BASE_FLAGS_TO_PASS): Remove GCC_FOR_TARGET.
621 (EXTRA_GCC_FLAGS): Define GCC_FOR_TARGET based on whether
622 CC_FOR_TARGET was specified on the command line.
623 (MAKEOVERRIDES): Don't define.
627 * configure.in (m32r): Fix spelling of libg++ libs.
631 * config.sub (-apple*): Remove, now redundant.
635 * configure: Don't get confused by CPU-VENDOR-linux-gnu.
637 * configure: Rework yesterday's sed script patch.
639 * config.sub: Merge with FSF.
643 * config.guess: Merge from FSF.
646 * config.guess: Use pc instead of unknown, for pc clone systems.
647 Change linux to linux-gnu.
650 * config.guess: Avoid non-portable tr syntax.
654 * test-build.mk (HOLES): Add "xargs" for gdb.
656 * configure: Avoid hpux10.20 sed bug.
660 * configure.in config/mh-windows: Add support for windows host
661 (that is a build done under the Microsoft build environment).
665 * Makefile.in: Replace all uses of srcroot with s, to shrink
666 command line lengths.
669 * configure.in: If configuring for newlib, pass --with-newlib to
671 * Makefile.in (CC_FOR_TARGET): If winsup/Makefile exists, pass a
672 -Bnewlib/ and -Lwinsup to gcc.
673 (CXX_FOR_TARGET): Likewise.
677 * Makefile.in (ETC_SUPPORT): Add configure.
681 * configure.in: Use config/mh-dgux386 for i[345]86-dg-dgux
682 host configuration file.
686 * configure.in: Break mn10x00 support into separate
687 mn10200 and mn10300 configurations.
688 * config.sub: Likewise.
692 * configure.in: Add lots of stuff to noconfigdirs for
695 * config.sub, configure.in: Add mn10x00 support.
699 * make-all.com: Call conf-a-gas, not config-a-gas.
703 * configure.in (noconfigdirs): Don't build libgloss for arm-coff
708 * mpw-README: Add much more detail for native PowerMac.
709 * mpw-install: New file.
710 * mpw-configure: Add --norecursion and --help options.
711 * mpw-config.in: Translate readme and install files when
713 * mpw-build.in: Don't always depend on byacc and flex.
714 (install-only-top): New action.
719 * configure.in: You can now configure GDB for the v850.
724 * configure.in (noconfigdirs): Don't configure any C++ dirs
729 * config.sub: Recognize mips64vr5000.
733 * configure.in: Use a single line for host_tools and native_only.
737 * config.sub, configure.in: Add entries for m32r.
741 * Makefile.in (inet-install): Don't run install-gzip.
745 * configure.in: Don't config lots of things for *-*-windows*.
749 * mpw-config.in: Test for mpw-true, true, and null-command scripts.
750 (host_libs, host_tools): Copy from configure.in.
751 * mpw-configure: Don't complain about directories not found.
755 * configure.in (i[345]86): Recognize i686 for pentium pro.
756 (i[3456]86-*-dgux*): Use config/mh-sysv for the host configuration
759 * config.guess (i[345]86): Ditto.
763 * configure.in (noconfigdirs): Removed gdb for D10V.
768 * configure.in: Remove ld, target-libio, target-libg++, and
769 target-libstdc++ from noconfigdirs.
774 * configure: Fix three locations where shell scripts were
775 being run directly rather than with config_shell.
780 * configure.in (v850-*-*): Set up initial $noconfigdirs.
781 * config.sub (basic_machine): Recognize v850.
786 * mpw-configure: Handle multiple enable/disable options and
787 pass them down recursively, handle -c and -s flags appropriately
788 depending on choice of compiler, add escape mechanism for
789 quoted arguments to gC.
793 * configure.in (powerpc*-*-*): For eabi, system V.4, Linux, and
794 solaris targets, use config/mt-ppc to set C{,XX}FLAGS_FOR_TARGETS
795 so that -mrelocatable-lib and -mno-eabi are used.
797 * Makefile.in (CONFIGURE_TARGET_MODULES): If target compiler does
798 not support --print-multi-lib, don't abort.
802 * config/mh-cygwin32 (CFLAGS): Define _WIN32 to be compatible
803 with normal Windows compilation environment.
807 * make-all.com: Run config-a-gas.
808 * setup.com: Don't copy subdirectory files around.
812 * configure.in (*-*-ose): Remove exclusion of libgloss for this
813 target, it now compiles correctly.
817 * mpw-config.in: Generate Mac include for elf/dwarf2.h.
821 * configure.in (d10v-*-*): Remove ld from $noconfigdirs.
825 * configure.in (native_only): Add prms.
829 * Makefile.in (GAS_SUPPORT_DIRS): Add make-all.com and setup.com.
830 (BINUTILS_SUPPORT_DIRS): Likewise.
834 * configure.in (d10v-*-*): Don't configure ld or gdb until the
835 d10v support is added.
839 * configure.in (d10v-*-*): New target.
843 * config.guess (HP 9000/811): Recognize this as a PA1.1
848 * Makefile.in (do-tar-gz): New target, split out from tail end of
849 taz target. Run each command separately, don't use pipes.
854 * mpw-configure: Look for g-mpw-make.sed in config/mpw.
855 * mpw-build.in: No builds should depend on building byacc or flex,
856 they are assumed to be installed already.
860 * Makefile.in (CONFIGURE_TARGET_MODULES): Set r environment
861 variable that CC_FOR_TARGET needs.
865 * Makefile.in (CONFIGURE_TARGET_MODULES): Determine if the multlib
866 options have changed since the last time the subdirectory was
867 configured, and if it has, reconfigure.
868 (CLEAN_TARGET_MODULES): Delete multilib.out and tmpmulti.out, which
869 CONFIGURE_TARGET_MODULES uses to remember the old multilib options.
873 * Makefile.in (ALL_MODULES,CROSS_CHECK_MODULES,INSTALL_MODULES,
874 CLEAN_MODULES): Add bash.
875 (all-bash): New target.
879 * configure.in (mips-sgi-irix6*): Use mh-irix6 instead of mh-irix5.
883 * config.sub (basic_machine): Recognize d10v as a valid processor.
887 * mpw-configure: Add support for --bindir.
888 * mpw-build.in: Use a GCC-specific build script for GCC actions.
892 * configure.in: add bash, time, gawk to list of hosttools and things
893 to only build for native toolchains
897 * Makefile.in (docdir): Remove.
901 * Makefile.in (datadir): Set to $(prefix)/share.
905 * configure.in: build diff and patch for cygwin32-hosted
910 * config.sub: Accept -rtems*.
914 * configure.in: enable dosrel for cygwin32-hosted builds,
915 remove diff from the list of things not buildable
920 * Makefile.in (TARGET_SUBDIR): Move comment to previous line so we
925 * configure.in (mips*-sgi-irix6*): Set noconfigdirs appropriately.
929 * Makefile.in (taz): Handle case where tex3patch didn't even get
930 checked out. Also, if it was found, put the symlink in a new util
935 * config.guess (*:Linux:*:*): Add support for PowerPC Linux.
939 * config.sub: Recognize -openvms.
940 * configure.in (alpha*-*-*vms*): Set noconfigdirs.
941 * make-all.com, setup.com: New files.
945 * Makefile.in (taz): tex3patch moved to texinfo/util.
949 * configure: enable_gdbtk=no for cygwin32-hosted toolchains
950 * configure.in: remove make from disable-if-Can-Cross list
951 enable gdb if ${host} and ${target} are cygwin32
955 * config.guess (i?86-ncr-sysv*): Emit minor release numbers.
956 Recognize the NCR 4850 machine and NCR Pentium-based platforms.
960 * config.guess: Combine mips-mips-riscos cases, and use cpp to
961 distinguish sysv/svr4/bsd variants.
966 * configure.in: Added copyright notice.
967 * move-if-change: Added copyright notice.
971 * configure.in (powerpcle-*-solaris*): Until we get shared
972 libraries working, don't build gdb, sim, make, tcl, tk, or
977 * config.guess: Merge with FSF:
980 * config.guess (*:Linux:*:*): Add guess for sparc-unknown-linux.
983 * config.guess (AViiON:dgux:*:*): Fix typo in recognizing mc88110.
986 * config.guess: Combine two OSF1 rules.
988 * config.guess (dgux): Use /usr/bin/uname rather than uname,
993 * Makefile.in (MAKEDIRS): Removed $(tooldir).
997 * mpw-README: Document GCCIncludes.
1001 * configure.in (alpha-*-linux*): Set enable_shared to yes.
1005 * mpw-configure: Handle --enable-FOO and --disable-FOO.
1009 * configure.in (*-*-cygwin32): Configure make.
1013 * Makefile.in (inet-install): Quote value of INSTALL_MODULES.
1017 * Makefile.in (all-inet): Depend on all-perl.
1019 * Makefile.in (inet-install): New target.
1021 * Makefile.in (all-inet): Depend on all-tcl.
1022 (all-inet): Depend on all-send-pr.
1026 * configure.in (powerpcle-*-solaris*): Turn off tk and tcl
1031 * configure.in: Don't configure --with-gnu-ld on AIX.
1035 * configure.in (powerpcle-*-solaris*): Turn off gdb temporarily.
1039 * Makefile.in (ALL_MODULES): Added all-inet.
1040 (CROSS_CHECK_MODULES): Added check-inet.
1041 (INSTALL_MODULES): Added install-inet.
1042 (CLEAN_MODULES): Added clean-inet.
1043 (all-indent): New target.
1045 * configure.in (host_tools): Added inet.
1046 (native_only): Added inet.
1047 (noconfigdirs): Added inet.
1051 * configure.in: Don't configure libgloss if we are not configuring
1056 * configure.in: Don't configure libgloss for unsupported
1061 * Makefile.in (CLEAN_MODULES): Add clean-apache.
1065 * Makefile.in (ALL_MODULES): Include all-apache.
1066 (CROSS_CHECK_MODULES): Include check-apache.
1067 (INSTALL_MODULES): Include install-apache.
1068 (all-apache): New target.
1070 * configure.in: Added apache everywhere perl is seen.
1074 * Makefile.in: Add support for clean-{module} and
1075 clean-target-{module} rules.
1079 * configure.in (*-*-ose) do not build libgloss.
1083 * config.guess (prep*:SunOS:5.*:*): Turn into
1084 powerpele-unknown-solaris2.
1088 * configure.in: Permit --enable-shared to specify a list of
1093 * configure.in (host==solaris): Pass only the first word of $CC
1094 to /usr/bin/which when checking if we're using /usr/ccs/bin/cc.
1098 * Makefile.in (BASE_FLAGS_TO_PASS): pass down $(MAKE).
1102 * Makefile.in (ALL_MODULES): Include all-perl.
1103 (CROSS_CHECK_MODULES): Include check-perl.
1104 (INSTALL_MODULES): Include install-perl.
1105 (ALL_X11_MODULES): Include all-guile.
1106 (CHECK_X11_MODULES): Include check-guile.
1107 (INSTALL_X11_MODULES): Include install-guile.
1108 (all-perl): New target.
1109 (all-guile): New target.
1111 * configure.in (host_tools): Include perl and guile.
1112 (native_only): Include perl and guile.
1113 (noconfigdirs): Don't build guile and perl; no ports have been
1118 * configure (--enable-*): Handle quoted option lists such as
1119 --enable-sim-cflags='-g0 -O' better.
1123 * Makefile.in ({,inst}all-target): New rule so we can make and
1124 install all of the target directories easily.
1128 * configure.in: Add missing global flag in sed substitution when
1129 deleting `target-' from ${configdirs}.
1133 * Makefile.in (DO_X): Don't get confused if CC contains `=' in an
1136 * configure.in (mips*-nec-sysvr4*): Use a host_makefile_frag of
1139 * install.sh: Correct misspelling of transformbasename.
1141 * config.guess: Recognize mips-*-sysv*.
1145 * config.sub: Recognize mon960.
1149 * configure: Restore Canadian Cross handling of BISON and LEX,
1150 removed in Feb 20 change.
1155 Mention make install. Remove the old copyright date as well the
1156 clumsy and rather pointless copyright on the README file.
1160 * Makefile.in ($(CONFIGURE_TARGET_MODULES)): If there is a
1161 Makefile after running symlink-tree, then run `make distclean' to
1162 avoid clobbering any generated files in srcdir.
1166 * configure.in (m68k-*-netbsd*): Build everything now.
1170 * Makefile.in (taz): Fix quoting.
1174 * configure.in (sparclet-*-*): Build everything now.
1178 * configure.in (m68k-*-linux*): New host.
1182 * configure: Check for bison before byacc.
1186 * Makefile.in configure: Change the way LEX and BISON/YACC are
1187 set. configure now defines DEFAULT_LEX and DEFAULT_YACC by
1188 searching PATH. These are used as fallbacks by Makefile.in if
1189 flex/bison/byacc aren't in objdir.
1193 * Makefile.in: Make everything which depends upon all-bfd also
1194 depend upon all-opcodes, in case --with-commonbfdlib is used.
1198 * configure.in (host *-*-cygwin32): Don't build gdb if we are
1199 building NT native compilers on Unix.
1203 * configure.in: Don't get CC from the host Makefile fragment if we
1204 can find gcc in PATH, or if this is a Canadian Cross. Move the
1205 Solaris test for /usr/ucb/cc to the post target script, just after
1206 the compiler sanity test.
1210 * config.sub: Merge with FSF.
1214 * Makefile.in (RPATH_ENVVAR): New variable.
1215 (REALLY_SET_LIB_PATH): Use it.
1216 * configure.in: On HP/UX, set RPATH_ENVVAR to SHLIB_PATH.
1220 * config.sub, configure.in: Recognize sparclet cpu.
1224 * config.guess: Support m68k-cbm-sysv4.
1228 * config.guess (*:Linux:*:*): Guess m68k-unknown-linux and
1229 m68k-unknown-linuxaout from linker help string. Put quotes around
1234 * config.guess (powerpc-harris-powerunix): Add guess for port
1239 * config.guess (UNAME_VERSION): Recognize X4.x as an OSF version.
1243 * configure.in: If --enable-shared was used, set SET_LIB_PATH to
1244 $(REALLY_SET_LIB_PATH) in Makefile.
1245 * Makefile.in (SET_LIB_PATH): New variable.
1246 (REALLY_SET_LIB_PATH): New variable.
1247 ($(DO_X)): Use $(SET_LIB_PATH).
1248 (install.all, gcc-no-fixedincludes, $(ALL_MODULES)): Likewise.
1249 ($(NATIVE_CHECK_MODULES), $(CROSS_CHECK_MODULES)): Likewise.
1250 ($(INSTALL_MODULES), $(CONFIGURE_TARGET_MODULES)): Likewise.
1251 ($(ALL_TARGET_MODULES), $(CHECK_TARGET_MODULES)): Likewise.
1252 ($(INSTALL_TARGET_MODULES), $(ALL_X11_MODULES)): Likewise.
1253 ($(CHECK_X11_MODULES), $(INSTALL_X11_MODULES)): Likewise.
1254 (all-gcc, all-bootstrap, check-gcc, install-gcc): Likewise.
1255 (install-dosrel): Likewise.
1256 (all-opcodes): Depend upon all-libiberty.
1260 * config.guess (*:CYGWIN*): New
1264 * Makefile.in (all-target-winsup): All all-target-libiberty.
1268 * configure.in (noconfigdirs): Add missing # in front of comment.
1272 * configure.in: add second pass to things added to noconfigdirs
1273 so *-gm-magic can exclude libgloss properly.
1277 * mpw-configure (extralibs_name, rez_name): Set correctly
1278 for MWC68K compiler.
1280 * mpw-README: Add more info on the necessary build tools.
1284 * configure.in, config.sub: Recognize cygwin32.
1288 * config.guess, config.sub: Recognize A/UX.
1292 * config.sub: Merge with gcc/config.sub.
1296 * mpw-build.in (do-binutils): Add build of stamps.
1300 * config.sub: Add recognition for mips64vr4100*-* targets.
1304 * test-build.mk: Add checking of `hpux9' rather than just `hpux'.
1305 Add creation of gconfigargs with `--enable-shared' turned on.
1306 ($(host)-stamp-stage2-configured): Pass $(gconfigargs).
1307 ($(host)-stamp-stage3-configured): Likewise.
1308 (HOLES): Add chatr and ldd.
1309 (i386-ncr-sysv4.3*): Add use of /usr/ccs/bin in the PATH and HOLE_DIRS.
1313 * configure: Pass --nfp to recursive configures.
1317 * Makefile.in (DLLTOOL): New.
1318 (DLLTOOL_FOR_TARGET): New.
1319 (EXTRA_HOST_FLAGS): Pass down DLLTOOL.
1320 (EXTRA_TARGET_FLAGS): Ditto.
1321 (EXTRA_GCC_FLAGS): Ditto.
1322 (CONFIGURE_TARGET_MODULES): Ditto.
1324 * configure: Add DLLTOOL.
1329 * configure.in (i[345]86-*-sco3.2v5*): Use mh-sysv instead of
1330 mh-sco, since old workarounds no longer needed, and don't
1331 build ld, since libraries have weak symbols in COFF.
1335 * Makefile.in (CONFIGURE_TARGET_MODULES): Add missing ';'.
1339 * configure.in: Make sure that ${CC} can be used to compile an
1344 * Makefile.in (all-gdb): Depend on $(GDB_TK).
1345 * configure (GDB_TK): Set GDB_TK to either "all-tcl all-tk" or
1346 nothing depending on whether gdbtk is being built.
1350 * Makefile.in (newlib.tar.gz): Delete building of newlib's info files.
1354 * configure.in (noconfigdirs): Put ld or gas in this early, if the
1355 user specifically used --with-gnu-ld=no or --with-gnu-as=no.
1359 * config-ml.in: Add support for
1360 --disable-{softfloat,m68881,m68000,m68020} on m68*-*-*.
1361 Simplify setting of multidirs from --disable-foo.
1365 * Makefile.in (EXTRA_GCC_FLAGS): If any of the make variables
1366 LANGUAGES, BOOT_CFLAGS, STMP_FIXPROTO, LIMITS_H_TEST,
1367 LIBGCC1_TEST, LIBGCC2_CFLAGS, LIBGCC2_INCLUDES, and ENQUIRE are
1368 non-empty, pass them on to the GCC make.
1369 (all-bootstrap): New rule that is like all-gcc, except it executes
1370 the GCC bootstrap rule instead of the GCC all rule.
1374 * config-ml.in (ml_realsrcdir): New, to account for ${subdir}.
1378 * config.guess (AViiON:dgux:*:*): Update from FSF to add pentium
1383 * config.sub (i*86*) Change [345] to [3456]
1387 * configure.in (noconfigdirs): Add gas or ld if --with-gnu-as=no or
1392 * config-ml.in (rs6000*, powerpc*): Add switches to control which
1393 AIX multilibs get built.
1397 * configure.in (i386-win32): Don't build expect if we're not
1398 building the tcl subdir.
1402 * Makefile.in: (configure-target-examples, all-target-examples):
1403 New targets, configure and build example programs.
1407 * mpw-configure: If an mpw-config.in generated a file mk.sed,
1408 use it as input to sedit the generated MPW makefile.
1409 * mpw-README: Add a suggestion about Gestalt.h.
1413 * config.sub: Accept *-*-ieee*.
1417 * Makefile.in (local-distclean): Remove $(TARGET_SUBDIR). From
1422 * configure.in (host==powerpc-pe): Add many directories to noconfigdirs
1423 for powerpc-pe native.
1424 (target==i386-win32): add tcl, make to noconfigdirs if canadian cross.
1425 (target==powerpc-pe): duplicate i386-win32 entry.
1429 * configure.in (noconfigdirs): Exclude target-newlib for all versions
1430 of vxworks, not just vxworks5.1.
1434 * mpw-configure: Add support for exec-prefix.
1438 * config.guess: Recognize HP model 816 machines as having
1443 * configure: Ignore new autoconf configure options.
1447 * config/mt-v810 (CC_FOR_TARGET): Add -ansi flag. NEC compiler
1448 defaults to K&R mode, but doesn't have varargs.h, so we have to
1449 compile in ANSI mode.
1453 * config.guess: Recognize Pentium under SCO.
1458 * configure.in (noconfigdirs): Disable target-libio on v810-*-*.
1459 * config/mt-v810 (CC_FOR_TARGET, AS_FOR_TARGET, AR_FOR_TARGET,
1460 RANLIB_FOR_TARGET): Set as appropriate for NEC v810 toolchain.
1464 * configure.in: Don't configure gas for alpha-dec-osf*.
1468 * configure.in: Default to --with-stabs for some targets for which
1469 it makes sense: mips*-*-*, alpha*-*-osf*, i[345]86*-*-sysv4* and
1470 i[345]86*-*-unixware*.
1474 * config-ml.in: Get list of multidirs using gcc --print-multi-lib
1475 rather than basing it on the target. Simplify handling of options
1476 controlling which directories to configure. Remove extraneous
1477 slash in multi-clean target.
1481 * config-ml.in: Prefix more variables with ml_ so they don't collide
1486 * configure: Don't turn -v into --v.
1490 * configure.in (targargs): Fix typo.
1492 * Makefile.in (DEVO_SUPPORT): Add symlink-tree.
1496 * configure.in: Strip --host and --target options from
1497 CONFIG_ARGUMENTS, and always configure for --host only. Add
1498 --with-cross-host option when building with a cross-compiler.
1499 * configure: Canonicalize the arguments put into config.status by
1500 always using `=' for an option with an argument. Pass a presumed
1501 --host or --target explicitly.
1505 * config.sub: Merge -macos*, -magic*, -pe*, and -win32 cases
1506 into general OS recognition case.
1510 * configure.in (target_configdirs): add target-winsup only
1511 for win32 target systems.
1515 * Makefile.in (all-target-libgloss): Depend upon
1516 configure-target-newlib, since when libgloss is built it looks to
1517 see if the newlib directory exists.
1521 * Makefile.in (DEVO_SUPPORT): Use config-ml.in instead of
1526 * configure: Handle LD and LD_FOR_TARGET when configuring a
1531 * config/mh-i386win32: add LD_FOR_TARGET.
1535 * configure.in (target_libs): add target-winsup.
1536 (target==i386-win32): add patch diff flex make to $noconfigdirs.
1537 (target==ppcle-pe): remove ld from $noconfigdirs.
1541 * Makefile.in (CONFIGURE_TARGET_MODULES): Pass --with-target-subdir.
1542 Preserve relative path names in $srcdir. Build symlink tree if
1543 configuring cross target dir and srcdir=. (= no VPATH support).
1544 (configure-target-libg++): Depend on configure-target-librx.
1545 * cfg-ml-com.in, cfg-ml-pos.in: Deleted.
1546 * config-ml.in: New file.
1547 * symlink-tree: New file.
1548 * configure: Ensure srcdir="." if that's what it is.
1552 * mpw-README: Clarify some phrasing, add notes about CodeWarrior
1553 includes and FLEX_SKELETON setting.
1554 * mpw-configure (--with-gnu-ld): New option, controls whether
1555 to use PPCLink or ld with PowerMac GCC.
1556 * mpw-build.in (all-grez, do-grez, install-grez): New targets.
1557 * mpw-config.in: Configure grez if targeting Mac.
1559 * config.sub: Accept pmac and pmac-mpw as names for PowerMacs,
1560 accept mpw and mac-mpw as names for m68k Macs, change macos7 to
1562 * configure.in: Configure grez resource compiler if targeting Mac.
1563 * Makefile.in (all-grez, install-grez): New targets.
1567 * configure: CXX defaults to gcc, not g++. If we find
1568 gcc in the path, set CC to gcc -O2.
1572 * configure: Default ${build} correctly. Avoid picking up extra
1573 spaces when reading CC and CXX from Makefile. When doing a
1574 Canadian Cross, use plausible default values for numerous
1576 * configure.in: When doing a Canadian Cross, don't try to
1577 configure tools whose configure script can't handle it.
1581 * cfg-ml-com.in (sh-*-*): Add m2 and ml/m2 to multidirs.
1585 * configure: Remove dubious bug reporting address.
1589 * Makefile.in ($(CONFIGURE_TARGET_MODULES)): If subdir has
1590 configure script, run that instead of this directory's configure.
1591 In either case, print a message that we're configuring the sub-dir.
1595 * configure.in: Before checking for the existence of various files,
1596 use sed to filter out "target-".
1600 * Makefile.in (DO_X): Split rule to decrease command line length
1602 (Philippe De Muyter).
1606 * Makefile.in (all-patch): depend on all-libiberty.
1610 * configure.in: If the only directory in target_configdirs which
1611 actually exists is libiberty, then set target_configdirs to empty,
1612 to avoid trying to build a target libiberty in a gas or gdb
1617 * configure.in (host_makefile_frag): Use m68k-sun-sunos* instead
1618 of m68k-sun-* when selecting mh-sun3 to avoid matching NetBSD/sun3
1623 * configure.in (copy_dirs): Use sys-include instead of include
1624 for --with-headers option.
1628 * Makefile.in, configure.in: Make winsup builds work with
1633 * configure.in: Build the linker on AIX.
1637 * Makefile.in (CC_FOR_TARGET, CXX_FOR_TARGET): Add $(TARGET_SUBDIR)
1642 * Makefile.in (all-gcc): Fix typo.
1646 * Makefile.in ($(CHECK_TARGET_MODULES)): Fix typo.
1650 * configure.in: Rename libFOO to target-libFOO, and xiberty
1651 to target-xiberty, to provide more flexibility.
1652 (target_subdir): Define. Create if cross.
1653 Set TARGET_SUBDIR in Makefile to ${target_subdir}.
1654 * Makefile.in: Rename all-libFOO -> all-target-libFOO, all-xiberty
1655 -> all-target-libiberty, configure-libFOO -> configure-target-libFOO,
1656 check-libFOO -> check-target-libFOO, etc.
1657 ($(DO_X)): Iterate over TARGET_CONFIGDIRS after SUBDIRS.
1658 ($(CONFIGURE_TARGET_MODULES), $(CHECK_TARGET_MODULES),
1659 $(ALL_TARGET_MODULES), $(INSTALL_TARGET_MODULES)): Update accordingly.
1660 (configure-target-XXX): Depend on $(ALL_GCC), not all-gcc, to
1661 allow ALL_GCC="" to only configure.
1662 (DEVO_SUPPORT): Add cfg-ml-com.in and cfg-ml-pos.in.
1663 (ETC_SUPPORT, ETC_SUPPORT_PFX): Merge; update 'taz' accordingly.
1664 (LIBGXX_SUPPORT_DIRS): Remove xiberty.
1668 * Makefile.in (taz): Build "info" in etc explicitly.
1672 * configure.in: Make sure that CC is undefined (as opposed to
1673 null) if toplevel/config/mh-{host} doesn't define it. Fixes a
1674 problem with autoconf trying to configure on a host without GCC.
1679 * config.sub: Add `magic' as an OS target for General Magic.
1684 * mpw-configure: Set host alias from choice of host compiler,
1685 only use generic MPW Makefile sed if present, edit a file
1686 named "hacked_Makefile.in" instead of "Makefile.in" if present.
1687 * mpw-README: Add problem notes about CW6 and CW7.
1691 * Makefile.in (taz): Use ";" instead of ";;".
1695 * Makefile.in (taz): Grep for '^diststuff:' or '^info:' in
1696 sub-directory Makefiles, instead of using DISTSTUFFDIRS and
1698 (DISTSTUFFDIRS, DISTDOCDIRS): Removed - no longer used.
1699 (newlib.tar.gz): Don't pass DISTDOCDIRS to recursive make.
1703 * Makefile.in (DISTDOCDIRS): Remove ld gprof bnutils gas libg++ gdb
1704 and gnats, because they are now subsumed by DISTSTUFFDIRS.
1705 Move bfd to DISTSTUFFDIRS.
1709 * Makefile.in (X11_LIB): Removed.
1710 (X11_FLAGS_TO_PASS): pass only X11_EXTRA_CFLAGS and X11_EXTRA_LIBS.
1712 * configure.in (host_makefile_frag): mh-aix & mh-sun removed.
1716 * cfg-ml-com.in (powerpc*): Shorten some of the multilib directory
1721 * cfg-ml-com.in (powerpc*-eabi*): Add mcall-aixdesc varients.
1725 * configure.in (i[345]86-*-win32): Always build newlib.
1726 Don't configure cvs, autoconf or texinfo.
1727 * Makefile.in (LD_FOR_TARGET): New.
1728 (BASE_FLAGS_TO_PASS, EXTRA_TARGET_FLAGS, CONFIGURE_TARGET_MODULES):
1729 Pass down LD_FOR_TARGET.
1733 * winsup: New directory.
1734 * Makefile.in: Build winsup.
1735 * configure.in: Winsup is configured when target is win32.
1736 Can only build win32 target GDB when native.
1740 * config.guess: Recognize HP model 819 machines as having
1745 * configure: Fix sed loop which substitutes for CC and CXX to
1746 avoid bug found in various sed implementations.
1750 * cfg-ml-com.in (powerpc-*-eabisim): Delete separate rule for
1751 simulator. Use standard powerpc-*-eabi*.
1755 * configure.in: Stop putting gas and binutils in noconfigdirs for
1756 powerpc-*-aix* and rs6000-*-*.
1760 * cfg-ml-com.in (powerpc*-*-eabisim*): Add support for building
1761 -mcall-aixdesc libraries.
1767 * config.sub (arm | armel | armeb): Fix shell syntax.
1771 * cfg-ml-com.in ({powerpc,rs6000}-ibm-aix*): Add multilibs for
1772 -msoft-float and -mcpu=common support.
1773 (powerpc*-*-eabisim*): Add support for building -mcall-aix
1778 * configure.in: Allow configuration and build of emacs19 for the alpha.
1782 * configure.in (CC): Get ^CC, not just any old CC, from
1783 ${host_makefile_frag}.
1787 * configure.in (CC): Try to get CC from
1788 ${srcdir}/${host_makefile_frag}, not ${host_makefile_frag}.
1792 * Makefile.in (TARGET_CONFIGDIRS): configure targetdirs
1793 only if it exists in $(srcdir).
1797 * configure: If CC and CXX are not set in the environment, set
1798 them, based on either an existing Makefile or on searching for gcc
1799 in PATH. Substitute for CC and CXX in Makefile.
1800 * configure.in: Remove libm from target_libs. Separate
1801 target_configdirs from configdirs. If CC is not set in
1802 environment, try to get it from a host Makefile fragment. Rewrite
1803 changes of configdirs to use skipdirs instead. A few minor
1804 tweaks. Take directories out of target_configdirs as they are
1805 taken out of configdirs. Remove existing Makefile files from
1806 subdirectories. Substitute for TARGET_CONFIGDIRS and
1807 CONFIG_ARGUMENTS in Makefile.
1808 * Makefile.in (TARGET_CONFIGDIRS): New variable, automatically set
1810 (CONFIG_ARGUMENTS): Likewise.
1811 (CONFIGURE_TARGET_MODULES): New variable.
1812 ($(DO_X)): Loop over TARGET_CONFIGDIRS as well as SUBDIRS.
1813 ($(CONFIGURE_TARGET_MODULES)): New target.
1814 (configure-libg++, configure-libio): New targets.
1815 (all-libg++): Depend upon configure-libg++.
1816 (all-libio): Depend upon configure-libio.
1817 (configure-libgloss, all-libgloss): New targets.
1818 (configure-libstdc++): New target.
1819 (all-libstdc++): Depend upon configure-libstdc++.
1820 (configure-librx, all-librx): New targets.
1821 (configure-newlib): New target.
1822 (all-newlib): Depend upon configure-newlib
1823 (configure-xiberty): New target.
1824 (all-xiberty): Depend upon configure-xiberty.
1828 * configure.in (host i[345]86-*-win32): Expand the
1833 * mpw-configure: Fix sed command file name.
1837 * configure.in (host i[345]86-*-win32): Reduce the
1842 * configure.in: Don't configure ld and gdb for powerpc*-*-winnt*
1843 or powerpc*-*-pe*, since they are not yet supported.
1847 Add PowerMac support and many other enhancements.
1848 * mpw-configure: New option --cc to select compiler to use,
1849 paste options set according to --cc into the generated
1850 Makefile, generate the Makefile by sed'ing the Unix Makefile.in
1851 if mpw-make.sed is present.
1852 * mpw-config.in: Don't test for gC1, test for mpw-touch,
1853 add forward includes for PowerPC include files.
1854 * mpw-build.in: Build using Makefile.PPC if present.
1855 (do-byacc, etc): Remove separate version resource builds.
1856 (do-gas): Build "stamps" before "all".
1857 (do-gcc): Build "stamps-h" and "stamps-c" before "all".
1858 * mpw-README: Update to reflect --cc option, PowerMac support,
1859 and recently-reported compatibility problems.
1863 * cfg-ml-com.in (m68*-*-*): Only build multilibs for
1864 embedded m68k systems (-aout, -coff, -elf, -vxworks).
1865 (--with-multilib-top): Pass to recursive invocations.
1869 * configure.in (noconfigdirs): Disable libg++ and libstdc++ on
1874 * configure.in (noconfigdirs): Disable bfd, binutils, gas, gcc,
1875 gdb, ld and opcodes on v810-*-*.
1879 * config/mh-ncrsvr43: Removed AR_FLAGS
1883 * Makefile.in (DO_X): Change do-realclean to do-maintainer-clean.
1884 (local-maintainer-clean): New target.
1885 (maintainer-clean): New target.
1886 (realclean): Just depend upon maintainer-clean.
1890 * configure.in (noconfigdirs): Disable gdb on m68k-*-netbsd*.
1894 * configure.in: Build ld in mips*-*-bsd* case.
1898 * config.sub: Accept -lites* OS. From Ian Dall.
1902 * config.sub: recognise mips64vr4300 and mips64vr4300el as valid
1907 * configure.in: treat i386-win32 canadian cross the same as
1908 i386-go32 canadian cross.
1912 * cfg-ml-com.in (powerpc*-*-eabisim): Add support for PowerPC
1913 running under the simulator to build a reduced set of libraries.
1914 (powerpc-*-eabiaix): Add fine grained multilib support added to
1915 other powerpc targets yesterday.
1919 * cfg-ml-com.in (powerpc*): Add support for -disable-biendian,
1920 -disable-softfloat, -disable-relocatable, -disable-aix, and
1921 -disable-sysv to control which multilib libraries get built.
1925 * configure: Add Makefile.tem to list of files to remove in trap
1930 * config.guess (*Linux*): Add missing "exit"s.
1931 Also, need specific check for alpha-unknown-linux (uses COFF).
1935 * config.guess: Merge with FSF:
1938 * config.guess (AIX4): More robust release numbering discovery.
1941 * config.guess (i386-sequent-ptx): Properly get version number.
1944 * config.guess (mips:*:4*:UMIPS): New case.
1948 * configure.in (i386-go32 host): Fix typo (deja-gnu -> dejagnu).
1949 (i386-win32 host): Likewise. Don't build readline.
1953 * Makefile.in (GDBTK_SUPPORT_DIRS): Define and pass as part of
1954 SUPPORT_FILES to submakes.
1958 * Makefile.in (GDB_SUPPORT_DIRS): Add utils.
1959 (DEVO_SUPPORT): Add mpw-README, mpw-build.in, mpw-config.h and
1964 * configure.in (appdirs): Use =, not ==, in test expression when
1965 trying to build the text to print in the warning message for
1970 * cfg-ml-com.in (z8k-*-coff): Add 'std' multilib build.
1974 * config.guess: Recognize lynx-2.3.
1978 * config.sub (z8ksim): Deleted
1979 (z8k-*-coff): New, this is the one true name of the target.
1983 * cfg-ml-pos.in (dotdot): Work around SunOS sed bug.
1987 * config.guess (*:Linux:*:*): First try asking the linker what the
1988 default object file format is (elf, aout, or coff). Then if this
1989 fails, try previous methods.
1993 * configure.in: Don't build newlib for *-*-vxworks5.1.
1997 * configure.in: Don't build newlib for a29k-*-vxworks5.1.
1998 * test-build.mk: Add setting of --with-headers for a29k-vxworks5.1.
2002 * cfg-ml-pos.in (MULTITOP): Trim excess trailing "/.".
2006 * cfg-ml-com.in: New file.
2007 * cfg-ml-pos.in: New file.
2011 * COPYING.NEWLIB: Add HP free copyright to list.
2015 * config.sub: Recognize -eabi* for the system, not just -eabi.
2019 * Makfile.in (DLLTOOL_FOR_TARGET): New name, pass it down.
2020 * config.sub, configure.in (win32): New target and host.
2024 * configure.in: Add i386-pe configuration.
2028 * mpw-build.in (install): Install GDB after LD.
2032 * mpw-config.in (elf/mips.h): Always forward-include, needed
2037 * testsuite: New directory for customer acceptance and whole tool
2042 * configure: If per-host line isn't found, but AC_OUTPUT is found
2043 and a configure script exists, run it instead.
2047 * config.guess: Update from FSF, for alpha-dec-winnt3.5 and Crays.
2051 * configure: Set build_{cpu,vendor,os,alias} to host values when
2052 --build isn't specified.
2056 * Makefile.in (PICFLAG, PICFLAG_FOR_TARGET): New macros.
2057 (FLAGS_TO_PASS): Pass them.
2058 (EXTRA_TARGET_FLAGS): Ditto.
2060 * config/m?-*pic: Define PICFLAG* instead of LIB*FLAGS*.
2064 * Makefile.in (all-libg++): Depend on all-libstdc++.
2068 * configure.in (noconfigdirs): Enable all packages for
2069 i386-unknown-netbsd.
2073 * configure.in (noconfigdirs): Don't configure tk for i386-go32
2074 hosted builds (DOS builds)
2078 Changes for ARM based on patches from Richard Earnshaw:
2079 * config.sub: Handle armeb and armel.
2080 * configure.in: Omit arm linker only for riscix.
2084 * config.guess: Update from FSF.
2088 * config.sub: Recognize powerpcle as the little endian varient of
2089 the PowerPC. Recgonize ppc as a PowerPC variant, and ppcle as a
2090 powerpcle variant. Convert pentium into i586, not i486. Add p5
2091 alias for i586. Map new x86 variants p6, k5, nexgen into i586
2096 * configure.in (hppa*-*-lites*): Treat like hppa*-*-*elf*.
2100 * config.sub: Accept -lites* as a basic system type.
2104 * config.guess (*:Linux:*:*): Check for whether the pre-BFD linker is
2105 installed, and if so return linuxoldld as the system name.
2109 * config.guess: Add hppa1.1-hp-lites support.
2113 * configure.in: Don't build newlib for m68k-vxworks5.1.
2117 * configure.in (mips-sgi-irix6): Use mh-irix5.
2121 * Makefile.in (all-gcc): Depend on all-ld (for libgcc1-test).
2125 * test-build.mk: Enable building of shared libraries on IRIX 5 and
2126 OSF/1. Fix compiler flags.
2127 * build-all.mk: Support Linux and OSF/1 3.0. Fix compiler flags.
2131 * configure.in: Recognize --with-newlib.
2132 (sparc-*-sunos4*): Build sim, dejagnu, expect, tcl if cross target.
2136 * Makefile.in: move {all,check,install}-gdb from *_MODULES
2137 to *_X11_MODULES due to gdbtk needing X include files et al.
2141 Merge in support for Mac MPW as a host.
2142 (Old change descriptions retained for informational value.)
2144 * mpw-config.in: Add generic include forwards for cpu-specific
2145 include files in aout and elf directories.
2147 * mpw-configure: Added copyright.
2148 * mpw-config.in: Check for presence of required build tools.
2149 (target_libs): Add newlib.
2150 (target_tools): Add examples.
2151 (Read Me): Generate as "Read Me for MPW" instead.
2152 * mpw-build.in: Base sub-builds on all-foo instead of do-foo.
2153 (all-byacc, do-byacc, all-flex, do-flex, do-newlib): New actions.
2154 (do-gas, do-gcc, do-gdb, do-ld): Build Version.r first.
2156 * mpw-configure: Remove subdir-specific makefile hackery,
2157 delete mk.tmp after using it.
2159 * mpw-build.in (all): Display start and end times.
2161 * mpw-configure (host_canonical): Set.
2162 (target_cpu): Always add to makefiles.
2163 (ARCHDEFS, EMUL): Add to makefile only if nonempty.
2164 (TM_FILE, XM_FILE, NM_FILE): No longer add to makefile.
2165 (mpw-mh-mpw): Look for in srcdir and srcroot.
2166 Use sed instead of mpw-edit-prefix to edit prefix definitions.
2168 * mpw-build.in: (install-only): New target.
2170 * mpw-configure (host_alias, target_alias): Rename from hostalias
2171 and targetalias, add into generated Makefile.
2172 (mk.tmp): If present, add into generated Makefile.
2173 * mpw-build.in (all-gas): Build config.h first before gas proper.
2175 * mpw-configure (config.status): Write only if changed.
2176 * mpw-config.in (readline): Configure it (not built, just used for
2179 * mpw-config.in (elf/mips.h): Add a forward include.
2181 * mpw-config.in: Forward-include most .h files in include into
2183 (readline): Don't build.
2184 mpw-build.in (install): Install GDB.
2186 * mpw-configure (prefix, mpw_prefix): Handle it.
2187 * mpw-config.in (mmalloc, readline): Don't configure.
2188 * mpw-build.in (thisscript): Rename to ThisScript.
2189 Use mpw-build instead of BuildProgram everywhere.
2190 (mmalloc, readline): Don't build.
2191 * mpw-README: New file, basic documentation about the MPW port.
2193 * mpw-config.in: Use forward-include to create include files.
2195 * mpw-configure: Add more things to the top of each configured
2196 Makefile, including contents of config/mpw-mh-mpw.
2197 * mpw-config.in (extra-include): Create this directory and fill it
2198 with Posix-like include files when configuring.
2200 * config.sub (apple, mac, mpw): Add various aliases.
2202 * mpw-build.in: New file, top-level build script fragment for MPW.
2203 * mpw-configure: New file, configure script for MPW.
2204 * mpw-config.in: New file, config fragment for MPW.
2208 * configure.in (host_libs): Remove glob, since it is gone from the
2213 * Makefile.in: define empty GDB_NLM_DEPS var.
2215 * configure.in(target_makefile_frag): use config/mt-netware
2216 for netware targets.
2220 * config.sub: Merge in recent FSF changes. Remove linux special
2225 build-all.mk,config/mh-solaris: revert these two changes:
2229 * build-all.mk: Use CC=cc -Xs on Solaris.
2231 Mon Mar 29 19:59:26 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2233 * config/mh-solaris: SunPRO C needs -Xs to be able to get a
2234 working xmakefile for Emacs.
2238 * glob/*: Removed. Schauer's 24 Feb 1994 readline change made us
2240 * Makefile.in: Nuke all references to glob subdirectory.
2244 * configure.in: Fix --enable-shared logic in per-host.
2248 * configure.in (*-hp-hpux[78]*): Use mh-hpux8.
2252 * configure.in (noconfigdirs): Don't build gas on AIX, for
2253 powerpc*-*-aix* as well as for rs6000*-*-aix*.
2257 * configure: Fix --cache-file to work if the file argument is a
2262 * configure: If the --cache-file is used, pass it down to
2263 configure in subdirectories.
2267 * config.sub: add vxworks29k configuration.
2271 * Makefile.in (taz): Do "diststuff" part quietly.
2275 * config.sub: Mini-merge with gcc/config.sub.
2279 * config.guess (IRIX): Sed - to _.
2283 * Makefile.in (source-vault, binary-vault): New targets.
2287 * config.sub: Recognize -eabi as a basic system type.
2291 * configure.in (enable_shared stuff): Fix typo.
2295 * Makefile.in (BASE_FLAGS_TO_PASS): Fix typo in passing LIBCXXFLAGS*.
2299 * Makefile.in (LIBCXXFLAGS_FOR_TARGET): Add -fno-implicit-templates.
2303 * configure.in (rs6000-*-*): Don't build gas.
2307 * Makefile.in: Use /x/x/ instead of /brokensed/brokensed/, to
2308 reduce command line length.
2309 (AS_FOR_TARGET): Check for as.new, not Makefile.
2310 (NM_FOR_TARGET): Check for nm.new, not Makefile.
2314 * config.guess: Merge from FSF.
2318 * configure: Don't use $ when handling program_suffix.
2322 * configure.in: Configure tk for hppa/hpux.
2326 * Makefile.in (LIBGXX_SUPPORT_DIRS): Add libstdc++.
2330 * Makefile.in: Move -fno-implicit-template from CXXFLAGS
2331 to LIBCXXFLAGS. Tests are better run without it.
2335 * Makefile.in (all-ispell): Depend on all-emacs19 instead of all-emacs.
2339 * configure.in (*-*-netware*): Don't configure xiberty.
2343 * configure.in: Remove tk from native_only list.
2347 * build-all.mk: Add mips-ncd-elf target to sun4 targets
2348 for special NCD build.
2352 * Makefile.in (DEVO_SUPPORT): Remove configure.bat and
2353 makeall.bat, they're only useful for binutils snapshots.
2354 (binutils.tar.gz, gas+binutils.tar.gz): Add configure.bat and
2355 makeall.bat to specified SUPPORT_FILES.
2359 * build-all.mk: Add Ericsson targets to sun4 and solaris
2360 hosts. Add BNR's sun4 target to solaris host, so their
2361 build-from-source will be tested in-house first.
2365 * Makefile.in (LIBCFLAGS): New variable.
2366 (CFLAGS_FOR_TARGET): Ditto.
2367 (LIBCFLAGS_FOR_TARGET): Ditto.
2368 (LIBCXXFLAGS): Ditto.
2369 (CXXFLAGS_FOR_TARGET): Ditto.
2370 (LIBCXXFLAGS_FOR_TARGET): Ditto.
2371 (BASE_FLAGS_TO_PASS): Pass them.
2372 (EXTRA_TARGET_FLAGS): Ditto.
2374 * configure.in, config/m[th]-*pic: Support --enable-shared.
2378 * configure.in (target_libs): Include libstdc++ again.
2379 * config.guess: Update from FSF (for FreeBSD).
2383 * Makefile.in (DEVO_SUPPORT): Include configure.bat and
2385 (DISTDOCDIRS): Add `etc'.
2386 (ETC_SUPPORT_PFX): New variable.
2387 (taz): Include anything from etc starting with a word in
2392 * config.sub: Update for recent FSF changes. Remove obsolete
2393 h8300hds entry. Add -windows* and -osx as basic os. Minor
2398 * configure.in (target_libs): Remove libstdc++ for libg++-2.6.1.
2400 * config.guess: Merge with FSF.
2401 * configure.in: Match on i?86-ncr-sysv4.3, not i?86-ncr-sysv43.
2405 * configure: Since the "trap 0" handler will override the exit
2406 status on many systems, only use it for "exit 1", and make it set
2407 a non-zero exit status; reset it before "exit 0". Also, check
2408 exit status of config.sub, and error out if it failed.
2412 * Makefile.in: (ALL_TARGET_MODULES,INSTALL_TARGET_MODULES) Build
2413 and install libgloss.
2417 * Makefile.in (all-binutils): Depend upon all-byacc.
2419 * configure.in: Don't build emacs on Irix 5.
2423 * configure.in (*-*-netware*): Add libio.
2427 * Makefile.in (ALL_TARGET_MODULES): Add libstdc++.
2428 (CHECK_TARGET_MODULES): Ditto.
2429 (INSTALL_TARGET_MODULES): Ditto.
2430 (TARGET_LIBS): Ditto.
2431 (all-libstdc++): Note dependencies.
2435 * Makefile.in (BINUTILS_SUPPORT_DIRS): Add gas.
2439 * Makefile.in (CXXFLAGS): Use -fno-implicit-templates instead of
2440 -fexternal-templates.
2442 * configure.in (target_libs): Add libstdc++.
2443 (noconfigdirs): Add libstdc++ as appropriate.
2447 * config.guess: Update from FSF.
2451 * configure: Use ${config_shell} when running ${configsub}.
2455 * config.sub: No longer recognize h8300h.
2459 * config.sub: Remove extraneous differences between config.sub and
2464 * Makefile.in (DISTSTUFFDIRS): Add gas.
2468 * COPYING.NEWLIB: New file.
2472 * config.guess (HP-UX): Patch from Harlan Stenn
2477 * config.guess (sun4*:SunOS:*:*): Change '-JL' to '_JL'.
2481 * config.sub: Merge nextstep cleanup from FSF.
2485 * configure.in (arm-*-*): Don't configure ld for this target.
2489 * configure.in (*-*-netware): don't configure libg++, libio,
2494 * configure.in (alpha-dec-osf*): Use osf*, not osf1*. Don't
2495 configure ld--it works, but it doesn't support shared libraries.
2499 * config.guess (*-unknown-freebsd*): Get rid of possible
2500 trailing "(Release)" in version string.
2505 * config.guess: Fix i486-ncr-sysv43 -> i486-ncr-sysv4.3.
2506 Fix type: *-next-neststep -> *-next-nextstep.
2508 * config.guess: Merge from FSF:
2512 * config.guess: Recognize powerpc-ibm-aix3.2.5.
2516 * config.guess: Recognize UnixWare 1.1 (UNAME_SYSTEM is SYSTEM_V
2517 instead of UNIX_SV for UnixWare 1.0).
2521 * Makefile.in (all-gdb): Add dependencies on all-gcc and all-ld
2522 to make gdb/nlm/* build after the compiler and linker.
2526 * config.guess (netbsd, freebsd, linux): Accept any machine,
2528 (m68k-atari-sysv4): Relocate to match FSF version.
2530 * config.guess: More merges from the FSF:
2532 Add a space before function call or macro invocation.
2536 * config.guess: Add trap cmd to remove dummy.c and dummy when
2541 * config.guess (dummy.c): Redirect stderr for `hostinfo' command.
2542 (dummy): Redirect stderr from compilation of dummy.c.
2546 * config.guess: Distinguish between NeXTStep 2.1 and 3.x.
2550 * configure: Accept and ignore --cache*, for compatibility with
2555 * config.guess: Merge from FSF:
2559 * config.guess (Pyramid*:OSx*:*:*): New case.
2560 (PATH): Add /.attbin at end for finding uname.
2561 (dummy.c): Handle i860-alliant-bsd. Follow whitespace conventions.
2565 * config.guess (M88*:DolphinOS:*:*): New case.
2569 * config.guess (AViiON:dgux:*:*): Use TARGET_BINARY_INTERFACE
2570 to select whether to use ELF or COFF.
2574 * config.guess: Recognize i860-stardent-sysv and i860-unknown-sysv.
2578 * config.guess: Guess the OS version for HPUX.
2582 * config.guess (UNAME_VERSION): Recognize aix3.2.4 and aix3.2.5.
2586 * configure.in: Recognize --with-headers, --with-libs, and
2588 * Makefile.in (all-xiberty): Depend upon all-ld.
2592 * configure.in: Change i[34]86 to i[345]86.
2596 * configure (version): A few more tweaks to help message.
2600 * Makefile.in: Remove (for now) librx as a host library,
2601 now that we're building it for target.
2610 * configure.in: Also configure librx.
2614 * Makefile.in: Update various rules to reflect that librx
2615 is now needed for libg++.
2619 * config.sub: Accept mips64orion and mips64orionel as a CPU name.
2623 * configure.in: Configure the examples directory.
2627 * configure: Simplify Jun 2 1994 change.
2631 * change CC to /usr/latest/bin/gcc for lynx host builds, since
2632 /bin/gcc isn't good enough to build gcc.
2636 * Makefile.in (GDB_SUPPORT_FILES): Remove
2637 (setup-dirs-gdb, gdb.tar.gz, make-gdb.tar.gz): Remove old rules.
2638 (gdb.tar.gz): Add new rule to use standard distribution building
2643 * configure.in: Warn about use of /usr/ucb/cc on Solaris. From
2652 * configure: Search current dir first in .gdbinit.
2656 * config.sub: Recognize freebsd (merged from gcc config.sub).
2660 * config.sub: Refer to NeXT's operating system as nextstep.
2662 * config.sub (case $basic_machine): Re-order the cases, to match
2663 the order in the FSF version (which is mostly alphabethical).
2664 Merge in some additions and changes from the FSF.
2668 * config.guess: Recognize m68k-atari-sysv4 and m88k-harris-csux7.
2669 * config.sub: Recognize cxux7.
2670 * configure.in: Use mh-cxux for m88k-harris-cxux*.
2674 * config.sub: Fix typo powerpc -> powerpc-*.
2678 * Makefile.in: `all-emacs19' depends on `all-byacc'.
2680 * Makefile.in: Add all-emacs19 and install-emacs19 rules (in
2681 parallel with all-emacs and install-emacs). Top-level command
2682 `make all-emacs19 CC=gcc' now behaves as `make all-emacs CC=gcc'.
2686 * test-build.mk ($(host)-stamp-stage2-installed): Remove
2687 $(relbindir)/make before doing ``make install'', and use
2688 $(GNU_MAKE) while doing it. Avoids problem on SunOS with
2689 installing over running make binary.
2690 ($(host)-stamp-stage3-installed): Likewise.
2694 * config.guess: Recognize Mach.
2698 * configure: Check ${exec_prefixoption}, not ${exec_prefix}, to
2699 see whether --exec-prefix was used.
2703 * README: Explicitly mention libg++/README. (Zoo's idea.)
2707 * Makefile.in: Add all-librx target similar to all-libproc.
2711 * config.guess: Rearrange tests for Alpha-OSF1 to properly deal
2712 with post 1.2 uname bogosity.
2716 * configure: Remove temporary files on receipt of a signal.
2720 * configure: If there is a package_makefile_frag, remove
2721 ${subdir}/Makefile.tem after copying it in.
2725 * build_all.mk: support rs6000 lynx identifies itself as
2726 rs6000-lynx-lynxos2.2.2. Also, use /usr/cygnus/progressive/bin/gcc
2727 since /bin/gcc is too feeble to compile a modern gcc.
2731 * brought devo/test-build.mk update-to-date with progressive/
2732 test-build.mk. Add lynx targets and hppa flag info.
2736 * configure.in: Use mh-ncrsvr43. Patch from
2741 * config.guess (i386-unknown-bsdi): No longer need to
2742 check #if defined(__bsdi__) && defined(__i386__).
2746 * configure: Set program_transform_nameoption correctly.
2750 * brought build-all.mk update-to-date with progressive build-all.mk,
2751 added new targets and hppa info.
2755 * configure: If config.guess result is a prefix of the user
2756 specified target, assume a native build and use the user specified
2757 target as the host alias. Remove SunOS patch suffix removal hack.
2758 * configure.in: Remove SunOS patch suffix removal hack.
2760 * Makefile.in (CROSS_CHECK_MODULES): Remove check-flex, since it's
2761 in NATIVE_CHECK_MODULES.
2765 * Makefile.in: Rename HOST_ONLY to NATIVE.
2766 * configure: Delete SunOs patch suffix from host_canonical
2767 and build_canonical variables that are prepended to Makefiles.
2768 * configure.in: Add comments for easier maintenance.
2772 * Makefile.in: Add all-libproc target similar to all-gui.
2776 * Makefile.in (CHECK_MODULES): split into
2777 HOST_ONLY_CHECK_MODULES and CROSS_CHECK_MODULES.
2781 * config.guess (i386-unknown-bsdi): New system to guess.
2785 * Makefile.in: Add all-gui target (but not yet build by "all").
2789 * config.sub: Move deletion of patch suffix from here...
2790 * configure.in: To here, at Ian's suggestion. The top-
2791 level scripts might need to know of a patch level.
2795 * config.sub: Strip off patch suffix so rtl is recognized
2796 as a sunos4.1.3 machine, even though it's been patched.
2800 * Makefile.in (INSTALL_LAST): Delete.
2801 (INSTALL_DOSREL): New.
2805 * configure.in: Use ld for i[34]86-*-sysv4* and sparc-*-solaris2*.
2806 Don't set use_gnu_ld to no for *-*-sysv4; that only controls
2807 whether we pass down --with-gnu-ld anyhow.
2811 * Makefile.in (INSTALL_LAST): Change operation so it works
2812 on more flavors of make.
2813 * configure.in (go32): Don't build libg++ or libio.
2817 * Makefile.in (Move HOST_PREFIX_1 and friends up so
2818 they can be overriden by templates.
2822 * configure.in (target==go32): Don't build gdb.
2823 * dosrel: New directory.
2827 * configure.in (host==go32): Configure dosrel too.
2828 * Makefile.in (INTALL_TARGET): Call INSTALL_LAST last.
2829 (HOST_CC, HOST_PREFIX, HOST_PREFIX_1): Undefine, they should
2830 be set by incoming names or templates.
2831 (INSTALL_LAST): New rule.
2832 * config/mh-go32: New fragment.
2836 * config.sub (sparclitefrw, sparclitefrwcompat): Don't set the os.
2840 * config/mh-lynxrs6k: Renamed from mh-lynxosrs6k, to make it
2841 unique in 8.3 naming schemes.
2842 * configure.in (appdirs): New variable. Currently empty, but will
2843 be used in gas distribution. If nonempty, lists a set of
2844 directories at least one of which must get configured, or top
2845 level configuration is considered to have failed.
2846 (rs6000-*-lynxos*): Use new file name.
2850 Eliminate XTRAFLAGS.
2851 * Makefile.in (CC_FOR_TARGET): If newlib exists, refer to the
2852 newlib include files using -idirafter, and also use -nostdinc.
2853 (CXX_FOR_TARGET): Likewise.
2854 (XTRAFLAGS): Removed.
2855 (BASE_FLAGS_TO_PASS): Remove XTRAFLAGS_FOR_TARGET.
2856 (EXTRA_HOST_FLAGS): Remove XTRAFLAGS.
2857 (EXTRA_TARGET_FLAGS, EXTRA_GCC_FLAGS): Likewise.
2858 ($(DO_X)): Don't pass down XTRAFLAGS.
2862 * configure.in (mips*-dec-bsd*): New target; do build linker.
2863 (mips*-*-bsd*): New target; don't build linker.
2867 * configure.in: support rs6000-*-lynxos* configuration.
2868 support sunos4 as a cross target.
2870 * config.sub: look for lynx*, not lynx since the OS version may
2871 legitimately be part of the name.
2875 * configure.in (i[34]86-*-sco*): Move to be with other i386
2877 (romp-*-*): New target. Skip various binary utilities.
2878 (vax-*-*): New target. Don't build newlib.
2879 (vax-*-vms): Renamed from *-*-vms. Don't build opcodes or newlib.
2883 * configure.in: Only set host_makefile_frag if config
2888 * install.sh: If $dstdir exists, don't check whether each
2893 * test-build.mk (HOLES): Add sleep; used by rcs/src/conf.sh.
2897 * configure.in (*-*-lynxos*): Don't configure newlib for either
2898 native or cross Lynx.
2902 * config.sub (sparc64-elf): Fix os.
2903 (z8k): Remove duplicate.
2907 * Makefile.in (gcc-no-fixedincludes): Touch gcc/include/fixed, not
2908 gcc/stmp-fixproto, to try to prevent fixproto from being run.
2912 * configure: Make file links cleanly even if Lynx fails on
2913 an NFS symlink (at least fail cleanly).
2917 * test-build.mk (CC): For mips-sgi-irix4, change -XNh1500 to
2922 * configure: Unknown options are fatal again.
2926 * configure: Ignore --x-includes and --x-libraries, for Autoconf
2931 * build-all.mk: Add `clean' target.
2935 * config.guess: Add SINIX support.
2936 * configure.in: Add mips-*-sysv4* support.
2940 * build-all.mk: Document all useful targets.
2941 If canonhost is sparc-sun-solaris2.3, change it to sparc-sun-solaris2.
2942 If canonhost is mips-sgi-irix4.0.5H, change it to mips-sgi-irix4.
2946 * configure: Support --silent, --quiet.
2950 * configure: Support --disable-FEATURE.
2954 * config.guess: Recognize NCR running SVR4.3.
2958 * config.guess: Make BSDI generate i386-unknown-bsd386.
2963 * configure.in (powerpc-*-aix*): Treat like rs6000-*-*.
2967 * configure: Make unrecognized options give nonfatal warnings
2968 instead of fatal errors, and pass them to any subdirectory
2969 configures in case they recognize them.
2970 Make --x equivalent to --with-x.
2974 * configure: Add --enable-* options. Clean up usage message and
2979 * Makefile.in (NM_FOR_TARGET): Build tree version is now nm.new.
2983 * configure.in (hppa*-*-*): Enable binutils.
2987 * config.sub: Recognize cisco.
2991 * Makefile.in (CXXFLAGS): Add -fexternal-templates.
2995 * config.guess: about target *-hitachi-hiuxwe2, don't print more
2996 than one configuration name. Add comment.
3000 * config.guess: about target *-hitachi-hiuxwe2, fixed
3001 machine guessing order. [Hitachi's CPU_IS_HP_MC68K
3002 macro is incorrect.]
3006 * Makefile.in (TAGS): Just build TAGS in each subdirectory, rather
3007 than the "make ls" stuff which used to be here.
3011 * config.guess: Recognize i[34]86-unknown-freebsd.
3016 * configure.in (noconfigdirs for alpha): Remove libg++ and libio.
3020 * config.guess: Check for ptx.
3024 * config.sub: Add os9k checking.
3028 * config.guess: Handle OSF1 running on HPPA processors
3032 * configure: If subdir configure fails, print out a message with
3033 subdirectory name, in case subdir's configure code didn't identify
3038 * configure.in: Remove embedded newlines from configdirs.
3039 Avoid mismatches of substrings. Fix matching strings at end
3042 Fri Feb 11 15:33:33 1994 Stu Grossman (grossman at cygnus.com)
3044 * config.guess: Add Lynx/rs6000 config support.
3048 * configure.in (alpha-dec-osf1*, alpha*-*-*): Build gas.
3052 * configure.in (hppa*-*-osf*): Treat this just like most other
3053 PA configurations (eg no binutils or ld).
3054 (hppa*-*-*elf*): These configurations have binutils and ld.
3062 * configure.in (rs6000-*-*): Build gas.
3066 * Makefile.in: Avoid bug in losing hpux sed.
3070 * Makefile.in, test-build.mk: Remove MUNCH_NM; it was only needed
3071 for GDB and GDB has been fixed to not need it.
3073 Mon Jan 31 18:40:55 1994 Stu Grossman (grossman at cygnus.com)
3075 * config/mh-lynxosrs6k: Account for lack of ranlib!
3079 * config.guess: Recognize vax hosts.
3083 * configure (while loop): Don't use "break 2" inside case
3084 statement -- the case statement isn't an enclosing loop.
3088 * config.guess: Clean up NeXT support, to allow nextstep
3089 on Intel machines. Make OS be nextstep.
3093 * config.guess: Add alternate forms for Convex.
3095 Thu Jan 20 16:13:41 1994 Stu Grossman (grossman at cygnus.com)
3097 * configure: Completely rewrite option processing. Take
3098 advantage of pattern-matching to avoid invoking test frequently.
3099 Also clean up host and target defaulting logic.
3103 * Makefile.in: Replace all occurrances of "rootme" with "r" and
3104 "$${rootme}" with "$$r", to increase the likelihood that the do-*
3105 commands (plus user environment) will fit SCO limits.
3109 * configure.in: Don't issue warnings about directories which are
3110 not being configured if -norecursion is set. Correct test for
3111 --with-gnu-as and --with-gnu-ld to not get confused by substring
3114 * configure.in: Don't build gas for alpha-dec-osf1*.
3116 Tue Jan 4 17:10:19 1994 Stu Grossman (grossman at cygnus.com)
3118 * configure: Back out Per's change of 12/19/1993. It changes the
3119 behavior of configure in unexpected and confusing ways.
3121 Also, use different delim char when calculating
3122 program_transform_name so that the name can contain slashes.
3126 * configure.in, config.sub: Add support for VSTa micro-kernel.
3130 * configure.in: Nuke hacks which were used to get a special
3131 version of GAS for HPPA configurations.
3135 * configure: If only ${target_alias} is given, use that
3136 as the default for ${host_alias}.
3137 * configure: Add missing back-slashes before nested quotes.
3141 * Makefile.in (BASE_FLAGS_TO_PASS): add YACC=$(BISON)
3145 * config.guess: Recognize some Tektronix configurations.
3150 * config.sub: Match any flavor of SH.
3154 * configure.in: Don't try to configure newlib for Alpha.
3158 * configure.in: Don't build ld for Irix 5. Don't build gas,
3159 libg++ or libio for any Alpha target.
3161 * configure.in (mips*-sgi-irix5*): New target; use mh-irix5.
3162 * config/mh-irix5. New file for Irix 5.
3166 * Makefile.in (GZIPPROG): Renamed from GZIP, which gzip uses for
3167 default arguments -- so it tried to compress itself.
3171 * configure.in (notsupp): ensure that a space is always at the end
3172 of the configdirs list, since the grep checks for an explicit space
3176 * configure.in (target i386-sysv4.2): don't build ld, since static
3177 versions of many libraries are not available.
3181 * config.guess: Recognize Apollos (using environment variables).
3182 * configure.in: Don't configure ld, binutils, or gprof for Apollo.
3186 * config.guess: Recognize Sony news mips running newsos.
3190 * Makefile.in (all-cygnus, build-cygnus): "fi else" needs to be
3191 "fi ; else" for bash.
3195 * Makefile.in (BASE_FLAGS_TO_PASS): pass SHELL.
3199 * config.sub: accept unixware as an alias for svr4.2.
3200 Fix some inconsistancies with the gcc version.
3204 * Makefile.in (DISTDOCDIRS): Add gdb.
3208 * Makefile.in (DISTDOCDIRS): Add libg++ and libio.
3212 * Makefile.in (taz): Only build "info" in DISTDOCDIRS.
3213 (DISTDOCDIRS): Don't assume libg++ and gdb folks necessarily want
3218 * config.sub: Accept hiux* as an OS name.
3220 * Makefile.in: Change RUNTEST_FLAGS back to RUNTESTFLAGS per
3221 etc/make-stds.texi. The underscore came from gcc, and dje now
3222 agrees that RUNTESTFLAGS is the correct name.
3226 * install.sh: Remove 'set -e'. It makes any conditionals
3227 in the script useless.
3229 * config.guess: Automatically recognize arm-acorn-riscix
3234 * Makefile.in: Change RUNTESTFLAGS to RUNTEST_FLAGS
3238 * Makefile.in (DISTDOCDIRS): New variable.
3239 (taz): Edit local Makefile.in sooner, instead of proto-toplev
3240 Makefile.in later. Build "info" and "dvi" in DISTDOCDIRS.
3244 * configure.in (hppa target): check the source directory for the
3249 * config.sub: Allow -aout* and -elf*.
3253 * configure.in: Don't build ld on i386-solaris2, same as for
3258 * Makefile.in (taz): Add texinfo/lgpl.texinfo (for libg++).
3262 * configure.in: Configure gdb for alpha.
3266 * Makefile.in (CXXFLAGS): Add -O.
3270 * config.guess: added support for DG Aviion
3274 * configure.in: Produce warning message for subdirectories not
3275 configurable for this host/target combination. Don't try to
3276 configure gdb for vms.
3280 * Makefile.in (taz): Replace "byacc" with "bison -y" in the
3281 appropriate files before making "diststuff".
3282 (DISTBISONFILES): New var: list of files to be edited.
3283 (DISTSTUFFDIRS): Add binutils.
3287 * config.sub: also handle mipsel and mips64el (for little endian mips)
3291 * configure.in: Add * to end of all OS names.
3295 * configure.in: Build newlib for LynxOS native.
3299 * config.guess: Add support for delta 88k running SVR3.
3301 * configure.in: Add comment about HP compiler vs. emacs.
3305 * configure.in: don't build ld on solaris2 (not a viable option
3306 due to bugs in getpwnam & getpwuid)
3310 * configure.in: Accept alpha-dec-osf1*, not just -osf1, since
3311 config.guess will produce a full version number.
3315 * configure.in: Build linker and binutils for alpha-dec-osf1.
3319 * Makefile.in: Remove -O from CXXFLAGS for consistency with CFLAGS,
3320 and gdb/testsuite/Makefile.in.
3324 * configure.in: recognize mips*- instead of mips-
3328 * config.sub: Accept linux*coff and linux*elf as operating
3333 * config.sub: Recognize mips64, and mips3 as an alias for it.
3337 * configure.in: Remove alpha-dec-osf*, no longer necessary now that
3338 gdb knows how to handle OSF/1 shared libraries.
3342 * configure.in: Recognize hppa*-*-hiux* (currently synonym for hpux).
3343 * config.guess: Recognize Hitachi's HIUX.
3344 * config.sub: Recognize h3050r* and hppahitachi.
3345 Remove redundant cases for hp9k[23]*.
3349 * configure.in: default to '--with-gnu-as' and '--with-gnu-ld'
3350 if gas and ld are in the source tree and are in ${configdirs}.
3351 If ${use_gnu_as} or ${use_gnu_ld} are 'no', then don't set the
3352 the --with options (but still pass them down on the command line,
3353 if they were explicitly specified).
3357 * configure: substitute SHELL value in Makefile.in with
3362 * configure.in: Build gas, ld, and binutils for *-*-sysv4* and
3363 *-*-solaris2* targets.
3367 * Makefile.in: define M4, and pass it down to sub-makes;
3368 all-autoconf now depends on all-m4
3372 * Makefile.in ({AR,RANLIB}_FOR_TARGET): make contingent on
3373 presence of {ar,ranlib} instead of a configured directory
3377 * config.guess: Accept 34?? as well as 33?? for NCR.
3381 * configure.in: grab mt-hppa for HPPA targets; use 'gas ' instead
3382 of 'gas' in sed commands, since 'gash' is now in the tree as well.
3386 * configure: grab values for $(CC) and $(CXX) from the
3387 environment, so that someone can do "CC=gcc configure; make" and
3388 have it work right (matching the way that autoconf works now)
3390 * configure.in, Makefile.in: add support for gash, the tcl
3393 * config.guess: add NetBSD variants (hp300, x86)
3397 * install.sh: Support -d option (in the manner of SunOS 4 install,
3398 as it is more deterministic than that of GNU install)
3399 (chmodcmd): Set file to mode 755 by default (should also do default
3400 chgrp and chown, but I don't feel like dealing with that now)
3404 * config.sub: Remove h8300hhms alias.
3408 * configure.in: Match *-*-solaris2* not *-sun-solaris2*.
3412 * Makefile.in (gcc-no-fixedincludes): touch stmp-fixproto as well
3417 * config.sub: recognize m88110-bug-coff.
3421 * Makefile.in (all-libio): all dependencies on the toolchain used
3422 to build this (gcc, gas, ld, etc)
3426 * config.guess: Deal with OSF/1 1.3 on alpha.
3430 * install.sh: add some 'else true' clauses for portability
3432 * configure.in: don't build libio for h8[35]00-*-* targets
3436 * Makefile.in: Add support for new libio.
3440 * install.sh: If one command fails, don't try the rest. Don't try
3441 to remove $dsttmp (via trap) unless we have already created it.
3442 If $src doesn't exist, detect it and exit with an error.
3444 * config.guess: Recognize BSD on hp300.
3448 * config.guess: Map (9000/[34]??:HP-UX:*:*) to m68k-hp-hpux.
3453 * Makefile.in (all-send-pr): depends on all-prms
3457 * config.guess: Fix typo (9000/8??:4.3bsd -> 9000/7??:4.3bsd).
3462 Added test for mips-mips-riscos5.
3466 * configure.in: use mh-hp300 for 68k HP hosts
3470 * configure: add support for CONFIG_SHELL, so that you can use
3471 some alternate shell for evaluating configure scripts
3475 * Makefile.in (make-gdb.tar.gz): Sed bug reporting address
3477 distribution archive.
3478 * Makefile.in (COMPRESS): Remove def.
3479 * Makefile.in (gdb.tar.gz, make-gdb.tar.gz): Renamed from
3480 gdb.tar.Z and make-gdb.tar.Z respectively.
3481 * Makefile.in (make-gdb.tar.gz): Now only build gzip'd archive.
3482 * Makefile.in (make-gdb.tar.gz): Minor changes to move closer
3483 to convergence with 'taz' target in Makefile.in.
3487 * install.sh (dsttmp): use trap to ensure that tmp files go
3488 away on error conditions
3492 * Makefile.in (BASE_FLAGS_TO_PASS): remove LOADLIBES
3496 * Makefile.in (install-dirs): Deal with a prefix like /gnu;
3497 its parent is '/' not ''.
3499 * Makefile.in (DEVO_SUPPORT): Add comments about ChangeLog.
3503 * configure: if ${newsrcdir}/configure doesn't exist, don't assume
3504 that ${newsrcdir}/configure.in does.
3508 * test-build.mk: support for CONFIG_SHELL
3512 * config.sub (netware): Add as a basic system type.
3516 * Makefile.in (Makefile): depend on configure.in. Also drop the
3517 $(srcdir)/ from the dependency on Makefile.in.
3521 * config.sub: Recognize h8300hhms as h8300h-hitachi-hms.
3522 (h8300hhms is temporary until multi-libraries are implemented).
3523 * configure.in: Handle h8300h too.
3527 * config.guess: Recognize dpx/2 as m68k-bull-sysv3.
3531 * configure: Remove extraneous output when guessing host type.
3532 * config.guess: Remove extraneous output when guessing using C
3533 compiler rather than uname, or when guessing fails.
3535 Wed Jul 7 17:58:14 1993 david d `zoo' zuhn (zoo at rtl.cygnus.com)
3537 * Makefile.in: remove all.cross and install.cross targets
3539 * configure: remove CROSS=-DCROSS_COMPILE and ALL=all.cross
3544 * configure.in (target sh): Build gprof.
3546 Thu Jul 1 16:52:56 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3548 * config.sub: change -solaris to -solaris2
3552 * configure.in: Use config/mh-riscos for mips-*-sysv*.
3556 * configure: Correct error message for missing Makefile.in to
3557 print correct directory.
3559 Tue Jun 29 13:52:16 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3561 * install.sh: kludge around 386BSD shell bug
3565 * config.guess: Recognize NeXT.
3566 * config.guess: Recognize i486-ncr-sysv4.
3567 * Makefile.in (taz): rm $(TOOL)-$$VER before linking.
3571 * Makefile.in (MAKEINFOFLAGS): New variable.
3572 (FLAGS_TO_PASS): Pass MAKEINFO as MAKEINFO MAKEINFOFLAGS.
3573 * build-all.mk, test-build.mk: Pass down --no-split as
3574 MAKEINFOFLAGS when hosted on DOS. Compile DOS hosted without -g.
3578 * Makefile.in (DEVO_SUPPORT): Add COPYING COPYING.LIB install.sh.
3582 * Makefile.in (libg++.tar.z): New rule.
3583 * Makefile.in (taz): Replace 'configure -rm' by 'make distclean'.
3584 * Makefile.in (taz): Only do a single chmod.
3586 Fri Jun 18 12:03:10 1993 david d `zoo' zuhn (zoo at majipoor.cygnus.com)
3588 * install.sh: don't use dirname anymore (replaced with sed usage)
3592 * Makefile.in: Change extension for gzip'd files from '.z' to
3593 '.gz' per new FSF standard usage.
3595 Thu Jun 17 16:58:50 1993 david d `zoo' zuhn (zoo at majipoor.cygnus.com)
3597 * configure: put quotes around the final value of program_transform_name
3599 Tue Jun 15 16:48:51 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3601 * Makefile.in: new install.sh support; update install-info rules
3605 * configure.in: Build diff for crosses, but not for go32 host.
3607 * configure.in: Build gprof only for native, and don't build it
3608 for mips-*-*, rs6000-*-*, or i[34]86-*-sco*.
3610 Mon Jun 7 13:12:11 1993 david d `zoo' zuhn (zoo at deneb.cygnus.com)
3612 * configure.in: don't build gas,ld,binutils on for *-*-sysv4
3616 * configure.in (host_tools): Add prms.
3618 Fri Jun 4 13:30:42 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3620 * Makefile.in: install gcc, do installation of $(INSTALL_MODULES)
3621 with $(FLAGS_TO_PASS) on the command line
3623 * config.sub: Recognize lynx and lynxos
3627 * config.sub: Accept -ecoff*, not just -ecoff.
3631 * Makefile.in (taz): Use .gz suffix instead of .z.
3632 (binutils.tar.gz, gas+binutils.tar.gz, gas.tar.gz): Fixed target
3635 Thu Jun 3 00:27:06 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3637 * Makefile.in (vault-install): add an 'else true' (for Ultrix)
3639 Wed Jun 2 18:19:16 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3641 * Makefile.in (install-no-fixedincludes): install gcc last, so
3642 that rebuilds that might happen during 'make install' don't get
3643 bogus gcc include files
3647 Change from Utah for HPPA support:
3648 * config.guess: Recognize hppa1.x-hp-bsd.
3652 * config.guess: Add support for Motorola Delta 68k, up to r3v7.
3655 Tue Jun 1 17:48:42 1993 Rob Savoye (rob at darkstar.cygnus.com)
3657 * config.sub: Add support for rom68k and bug boot monitors.
3661 * Makefile.in: Make all-opcodes depend on all-bfd.
3665 * config.guess: Added special check for i[34]86-univel-sysv4*.
3669 * config.guess: For i[34]86-unknown-sysv4 use UNAME_MACHINE for
3670 the processor rather than assuming i486.
3674 * config.guess: Recognize SunOS6 as Solaris3.
3678 * config.guess: Fix typo. Avoid #elif (not in K&R 1).
3679 Recognize SunOS 5.* only (and not [6-9].*) as being Solaris2.
3683 * build-all.mk (all-cross): New target for Canadian Cross.
3684 Added Q2 go32 targets.
3685 * test-build.mk: Configure go32 cross sparclite-aout and
3686 mips-idt-ecoff -with-gnu-ld. Moved build binary directory from
3687 PARTIAL_HOLE_DIRS to BUILD_HOLES_DIRS.
3689 Mon May 24 15:30:06 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3691 * configure.in: fix Alpha GDB typo; also, don't build DejaGnu for
3692 GO32 hosted toolchains
3694 Mon May 24 14:18:41 1993 Rob Savoye (rob at darkstar.cygnus.com)
3696 * configure: change so "-exec-prefix" gets passed down rather
3697 than "-exec_prefix" so autoconf generated Makefiles get the
3698 exec_prefix set right.
3700 Fri May 21 10:42:25 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3702 * config.guess: get the Solaris2 minor version number
3704 * Makefile.in: add standards.texi and make-stds.texi to ETC_SUPPORT
3708 * config.guess: Recognize some Sequent platforms.
3710 Thu May 20 14:33:48 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3712 * Makefile.in: added the vault-install target
3714 * configure.in: actually use the Sun3 makefile fragment that's in
3715 config, also added the release dir to configdirs
3719 * Makefile.in (taz): Fix modes on stuff in $(TOOL) dir also.
3721 Tue May 18 20:26:41 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3723 * configure.in: remove some program from Alpha targetted toolchains
3727 * Makefile.in (DISTSTUFFDIRS): Renamed from PROTODIRS. Add ld and
3729 (taz): Run "make diststuff" in those directories instead of "make
3730 proto-dir". Look for "VERSION=" only at start of line in subdir
3731 Makefile. Use "gzip -9" for compression.
3732 (TEXINFO_SUPPORT, DIST_SUPPORT, BINUTILS_SUPPORT_DIRS): New vars.
3733 (binutils.tar.z): New target.
3737 * Makefile.in (taz): Include gpl.texinfo.
3741 * Makefile.in (setup-dirs): Merged into "taz" target.
3742 (taz): Only do `proto-dir' stuff if a directory is actually needed
3747 * Makefile.in (MUNCH_NM): New variable, defined to be $(NM).
3748 (FLAGS_TO_PASS): Pass down MUNCH_NM.
3749 (HOST_CC, HOST_PREFIX, HOST_PREFIX_1): New variables.
3750 (EXTRA_GCC_FLAGS): Pass down HOST_* variables.
3751 (gcc-no-fixedincludes): Correct for current gcc Makefile.
3755 * Makefile.in (make-gdb.tar.Z): Add configure, config.guess,
3756 config.sub, and move-if-change to gdb testsuite distribution
3757 archive, so the testsuite can be extracted, configured, and
3758 run separately from the gdb distribution. Blow away the Chill
3759 tests that require a Chill compiled executable, since GNU Chill
3760 is not yet publically available.
3762 Mon May 10 17:22:26 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3764 * test-build.mk: set environment variables in a single command,
3765 instead of a list of assignments and exports
3767 * config.guess: recognize Alpha/OSF1 systems
3771 * configure: Change help message to prefer --options rather than
3776 * config.sub: Convergent Tech. "miniframe" uses m68010, sez
3778 * config.guess: Recognize miniframe.
3780 Sun May 9 17:47:57 1993 Rob Savoye (rob at darkstar.cygnus.com)
3782 * Makefile.in: Use srcroot to find runtest rather than rootme.
3783 Pass RUNTESTFLAGS and EXPECT down in BASE_FLAGS_TO_PASS.
3787 * test-build.mk: Extensive additions to support building on a
3788 machine other than the host.
3792 * configure (tooldir): Fix for i386-aix again.
3796 * configure, Makefile.in: Change definition of $(tooldir)
3801 * config.guess: Recognize i[34]86/SVR4.
3805 * Makefile.in (all-gdb): gdb depends on sim.
3809 * Makefile.in (gdb.tar.Z): Make prototype gdb testsuite directory
3810 at the same time we make the prototype gdb directory.
3811 * Makefile.in (make-gdb.tar.Z): Make the testsuite distribution
3812 files at the same time as the gdb base release distribution.
3816 * Makefile.in (check): Use individual check targets rather than
3822 * config.sub: Use sysv3.2 not sysv32 for canonical OS
3823 for System V release 3.2.
3827 * config.sub: Recognize hppaosf.
3828 * configure.in: Do configure ld/binutils/gas for it.
3832 * configure (tooldir): Alter syntax used to set this, for systems
3833 where "\$" isn't handled right, like i386-aix.
3837 * configure: Pass program-transform-name, not
3838 program_transform_name, to recursive configures.
3842 * Makefile.in (gas+binutils.tar.z): New rule for building snapshots
3847 * config.guess: Recognize AIX3.2 as distinct from 3.1.
3849 Sat Apr 17 17:19:50 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3851 * configure.in: rename m88k-motorola-m88kbcs to m88k-motorola-sysv
3853 * config/mh-delta88: remove extraneous GCC references
3857 * Makefile.in (PRMS): Set back to all-prms.
3861 * test-build.mk: Pass -with-gnu-as for known MIPS native and MIPS
3862 targets, rather than for MIPS hosts.
3864 Fri Apr 9 13:51:06 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3866 * configure.in: add comment for --with-x default values
3868 * config.guess: handle Motorola Delta88 box for SVR3 and SVR4.
3870 * Makefile.in: add check-* targets for each of the directories in
3871 the tree. Add a definition of RUNTEST that will use the one we
3872 just built, if it exists. Pass this down via FLAGS_TO_PASS.
3876 * configure.in: Removed obsolete references to bfd_target and
3877 target_makefile_frag.
3879 * build-all.mk: Set assorted targets for Q2.
3880 * config.sub: Recognize z8k-sim and h8300-hms.
3881 * test-build.mk: Really don't pass host to configure.
3882 (HOLES): Added uname.
3886 * configure: Handle an empty program-prefix, program-suffix or
3887 program-transform-name correctly.
3891 * build-all.mk: -G 8 no longer required for MIPS targets.
3892 * test-build.mk: Don't pass host argument to configure; make it
3897 * Makefile.in (gdb.tar.Z): Fix for building gzip'd distribution.
3898 * Makefile.in (COMPRESS): New macro, like GZIP.
3902 * test-build.mk: Use -with-gnu-as for mips-sgi-irix4 as well.
3904 * build-all.mk: Set GCC to gcc -O -G 8 for MIPS targets, since gcc
3905 with gas currently defaults to -G 0.
3909 * Makefile.in (all-flex): flex depends on byacc.
3911 * build-all.mk: If host not specified, use config.guess. Pass TAG
3912 to test-build.mk as RELEASE_TAG.
3913 * test-build.mk (configargs): New variable containing arguments to
3914 pass to configure. Set to -with-gnu-as on mips-dec-ultrix.
3915 (FLAGS_TO_PASS): Pass down RELEASE_TAG.
3917 * config.guess: Use /bin/uname when checking -X argument on SCO,
3918 to avoid invoking GNU uname which doesn't understand -X.
3920 * test-build.mk: Don't use /usr/unsupported/bin/as on AIX.
3922 * configure.in: Build gas for mips-*-*.
3926 * Makefile.in (all.normal): insert missing backslash.
3930 * build-all.mk, config/mh-irix4: Bump -XNh value to 1500 to match
3933 * Makefile.in: Complete overhaul to merge many almost identical
3938 * Makefile.in (setup-dirs-gdb): Renamed from setup-dirs.
3939 (gdb.tar.Z): Adjusted.
3941 * Makefile.in (setup-dirs, taz): New targets; should be general
3942 enough to adapt for gdb sometime. Build only .z file.
3943 (gas.tar.z): New target.
3947 * build-all.mk: Use CC=cc -Xs on Solaris.
3949 Mon Mar 29 19:59:26 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3951 * config/mh-sun3: cc needs -J to compile cp-parse.c correctly
3953 * config/mh-solaris: SunPRO C needs -Xs to be able to get a
3954 working xmakefile for Emacs.
3959 for handling BISON for FSF releases.
3963 * configure: Actually implement the change zoo just documented.
3965 Wed Mar 24 13:02:44 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
3967 * configure: when using config.guess, only set target_alias when
3968 it's not already been set (ie, on the command line)
3970 Mon Mar 22 23:07:39 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3972 * Makefile.in: add installcheck target, set PRMS to install-prms
3974 Sun Mar 21 16:46:12 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3976 * configure: add support for package_makefile_fragment, handle the
3977 case where a directory has a configure.in file but no Makefile.in
3978 more gracefully (with an actual understandable error message, even);
3979 add support for --without (and add this to the usage message); also
3980 explicitly add a --host=${host_alias} to the command line when
3981 config.guess is used
3985 * configure: Must use both --host and --target in recursive calls.
3989 * Makefile.in: Change deja-gnu to dejagnu.
3993 * configure.in (h8300-*-*, h8500-*-*): Don't build libg++.
3995 Fri Mar 12 18:30:14 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3997 * configure.in: canonicalize all instances to *-*-solaris2*,
3998 also strip out a number of tools to not build for go32 host
4002 * config.guess: add GPL.
4004 * Makefile.in, config.guess, config.sub, configure: bump
4009 * Makefile.in (do-info): Removed obsolete check for existence of
4012 * Makefile.in (MAKEOVERRIDES): Define to be empty.
4014 Wed Mar 10 03:11:56 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4016 * Makefile.in: a couple of 'else true' for decstation,
4019 * configure.in: configure tclX too; don't remove Tk on RS/6000 anymore
4023 * Makefile.in (setup-dirs): change invocation of make to $(MAKE).
4025 Mon Mar 8 14:52:11 1993 Ken Raeburn (raeburn@cambridge)
4027 * config.guess: Recognize i386-ibm-aix (PS/2).
4028 * configure.in: Use config/mh-aix386 file for it.
4032 * Makefile.in (GCC_FOR_TARGET): Eliminated definition; use
4033 CC_FOR_TARGET instead.
4034 (BASE_FLAGS_TO_PASS): Pass GCC_FOR_TARGET=$(CC_FOR_TARGET).
4038 * Makefile.in: Add sim to list of directories sent with gdb
4042 * configure.in: Put back mips-dec-bsd* case.
4047 * configure.in (vax-*-ultrix2*): Add Ultrix 2.2 triplet.
4048 * config.guess: Change 'VAX*:ULTRIX:*:*' to 'VAX*:ULTRIX*:*:*'.
4049 * config/mh-vaxult2: New file.
4051 Tue Mar 2 18:11:03 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4053 * configure.in: remove no-op mips-dec-bsd* in "case $target"
4055 * Makefile.in (dir.info): only run gen-info-dir if it exists,
4056 (install-info): install dir.info only if it exists,
4057 (all-expect, install-expect): pass along X11_FLAGS_TO_PASS
4061 * configure.in: For vms target, skip bfd, ld, binutils. Do build
4062 gas for mips-dec-bsd.
4066 * configure (makesrcdir): If ${srcdir} is relative and not ".",
4067 and ${subdir} is not ".", set makesrcdir based on ${invsubdir}.
4071 * configure.in: Added "dejagnu" to hosttools list.
4075 * config.sub, configure.in, config.guess: Add support
4076 for Bosx, an AIX variant from Bull.
4081 * devo/dejagnu: Initial creation of devo/dejagnu.
4082 Migrated dejagnu testcases and support files for testing software
4083 tools to reside as subdirectories, currently called "testsuite",
4084 within the directory of the software tool. Migrated all programs,
4085 support libraries, etc. beloging to dejagnu proper from
4086 devo/deja-gnu to devo/dejagnu. These files were moved "as is"
4087 with no modifications. The changes to these files which will
4088 allow them to configure, build, and execute properly will be made
4093 * Makefile.in: Change send_pr to send-pr.
4094 * configure.in: Likewise.
4095 * send_pr: Renamed directory to send-pr.
4099 * Makefile.in: Add some extra semi-colons (needed if SHELL=bash).
4103 * README: Update for gdb-4.8 release.
4104 * Makefile.in (gdb.tar.Z): Add texinfo/tex3patch. Build
4105 gdb-xxx.tar.z (gzip'd) file also.
4107 Thu Feb 18 09:16:17 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4109 * Makefile.in: make all-diff depend on all-libiberty
4113 * config.guess: add vax-ultrix in the spirit of mips-ultrix.
4115 Tue Feb 16 05:57:15 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4117 * configure.in, Makefile.in: add hello, tar, gzip, recode, indent
4121 * Makefile.in (DEVO_SUPPORT): Remove etc directory
4122 (ETC_SUPPORT): Only add the files GDB wants from etc/.
4123 (gdb.tar.Z): Use ETC_SUPPORT. Use byacc when building the file.
4125 Thu Feb 11 20:14:28 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4127 * Makefile.in: makeinfo binary is in a new location
4131 * config.sub: Accept -ecoff as an OS.
4133 * Makefile.in: Various changes to eliminate a level of make
4134 recursion and reduce the required command line length.
4135 (BASE_FLAGS_TO_PASS): New variable holding flags passed to all
4137 (EXTRA_HOST_FLAGS, EXTRA_TARGET_FLAGS, EXTRA_GCC_FLAGS): New
4138 variables holding settings for specific sub-makes.
4139 (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS, GCC_FLAGS_TO_PASS): Rewrote
4140 in terms of BASE_FLAGS_TO_PASS.
4141 (TARGET_LIBS): New variable listing directories which use
4142 TARGET_FLAGS_TO_PASS.
4143 (subdir_do): Eliminated.
4144 (do-*): New set of targets to replace subdir_do.
4145 (various): All targets which used subdir_do now depend on do-*.
4146 (local-clean): Renamed from do_clean.
4147 (local-distclean): New target, dependency of distclean and
4149 (install-info): Don't create directories. Depend on dir.info
4150 rather than calling make recursively.
4151 (install-dir.info): Eliminated.
4152 (install-info-dirs): Create all info directories here.
4153 (dir.info): Depend upon do-install-info.
4155 * test-build.mk (HOLES): Added false.
4159 * config.guess: Recognize BSDI and BSDJ (Jolitz 386bsd).
4161 Thu Feb 4 20:49:18 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4163 * Makefile.in (info): remove dependency on all-texinfo. The
4164 problem was really in texinfo/C, not at this level.
4168 * Makefile.in (info): Added dependency on all-texinfo (PR 2112).
4172 * Makefile.in (make-gdb.tar.Z): Change BISON to 'bison -y' for
4177 * configure: Include srcdir in message about target of link not
4178 being found. Don't convert `-' to `_' in `with' options being
4181 Tue Feb 2 18:57:59 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4183 * configure.in: add uudecode to host_tools
4185 * Makefile.in: added {all,install}-uudecode targets, added them to
4186 the appropriate lists
4190 * Makefile.in (all-gcc): Added dependency on all-gas.
4192 * configure.in (mips-*-*): Build ld and binutils.
4196 * configure: check return code from mkdir, print error message and
4201 * Makefile.in (make-gdb.tar.Z): New location for texinfo.tex.
4205 * test-build.mk (HOLES): Added tar, cpio and uudecode.
4209 * config.sub (h8500): Recognize this as a cpu type.
4211 Sat Jan 23 20:32:01 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4213 * configure: source directory missing is no longer a warning
4215 * configure.in: recognize irix[34]* instead of irix[34]
4217 * Makefile.in: define and pass down X11_LIB
4219 * config/mh-sco: define X11_LIB to the mess that SCO ODT requires
4223 * guess-systype: Renamed to ...
4224 * config.guess: ... by popular request.
4225 * configure.in, Makefile.in: Update accordingly.
4230 + Add Convex, Cray/Unicos, and Encore/Multimax support.
4231 + Execute ./dummy instead of assuming . is in PATH.
4235 * guess-systype: New shell script. Attempts to guess the
4236 canonical host name of the executing host.
4237 Only a few hosts are supported so far.
4238 * configure: Call guess-systype if no host is specified.
4242 * Makefile.in (gcc-no-fixedincludes): Made to work with current
4248 * Makefile.in (GCC_FLAGS_TO_PASS): New variable.
4249 (all-gcc, install-gcc, subdir_do): Use it.
4253 * Makefile.in: Rename uninstalled gcc driver from gcc to xgcc.
4257 * Makefile.in: Removed explicit setting of SUBDIRS. SUBDIRS is now
4258 set exclusively by configure, using configure.in .
4260 Wed Jan 6 13:44:11 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4262 * test-build.mk: set $PATH for all builds
4264 * Makefile.in: pass TARGET_FLAGS_TO_PASS for xiberty and libm
4268 * Makefile.in (GCC_FOR_TARGET): Supply a default that matches
4269 the one used in gcc/Makefile.in, so that a null expansion doesn't
4270 override the one needed to build gcc with a native cc.
4275 * configure: Accept -with arguments.
4279 * Makefile.in: added h8300sim
4283 * config/mh-sco: Don't override BISON definition.
4285 * build-all.mk: If canonhost is i386-unknown-sco3.2v4, change it
4286 to i386-sco3.2v4. Set TARGETS and CFLAGS for i386-sco3.2v4.
4287 (all-cygnus, native, build-cygnus): Make
4288 $(canonhost)-stamp-3stage-done, not $(host)....
4289 * test-build.mk (stamp-3stage-compared): Use tail +10c for
4290 i386-sco3.2v4. Added else true to if command.
4294 * config.sub: (from FSF) Sequent uses a BSD-like OS.
4298 * configure.in (i[34]86-*-isc*): added; uses mh-sysv.
4300 Thu Dec 24 17:26:24 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4302 * configure.in: don't remove binutils from Solaris builds
4306 * Makefile.in: get rid of earlier definitions for *clean,
4307 also handle the recursive info rule better
4311 * Makefile.in (mostlyclean, distclean, realclean): Fix to
4312 do more-or-less the right thing.
4316 * Makefile.in: Add lines defining CC and CXX, and use CXX rather
4317 than gcc in definitions of CXX_FOR_BUILD and CXX_FOR_TARGET.
4319 Tue Dec 15 00:34:32 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4321 * Makefile.in: change all $(host_cpu)-$(host_vendor)-$(host_os) to
4324 * configure.in: split the configdirs list into 4 categories (native
4325 v. cross, library v. tool) and handle the cross-only and native-
4326 only in more reasonable (and correct!) way.
4328 Mon Dec 14 17:04:22 1992 Stu Grossman (grossman at cygnus.com)
4330 * configure.in (hppa*-*-*): Don't remove bfd and gdb from
4333 Sun Dec 13 00:37:26 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4335 * Makefile.in: extensive cleanup:: removed all of the explicit
4336 clean-* targets, collapsed many wrappers around subdir_do into
4337 one, added additional targets to satisfy standards.texi, deleted
4338 some old targets, some changes for consistency
4340 Fri Dec 11 20:18:02 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4342 * configure.in: handle some programs as cross-only, and others as
4345 * test-build.mk: handle partial holes in a more generic manner
4347 * Makefile.in: m4 depends on libiberty
4349 Mon Dec 7 06:43:27 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4351 * config/mh-sco: don't default $(CC) to gcc
4353 Thu Dec 3 21:52:11 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4355 * configure.in: add m4, textutils, fileutils, sed, shellutils,
4356 time, wdiff, and find to configdirs
4358 * Makefile.in: all, clean, and install rules for the new programs
4359 added to configure.in
4361 Mon Nov 30 14:54:34 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4363 * configure.in: use mh-sun for all *-sun-* hosts
4365 * config/mh-solaris: rework standard X location to use
4366 $OPENWINHOME, if defined.
4368 * config/mh-sun: handle X11 include locations
4370 * config/mh-decstation: define NeedFunctionPrototypes to 0, to
4371 work around dain-bramaged DECwindows include files
4373 Fri Nov 27 18:35:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4375 * Makefile.in: define flags for X11 include files and library file
4376 locations, pass them down to the programs that need this info
4378 * build-all.mk: added a 'native' target, to 3stage the native toolchain
4380 * config/{mh-hpux,mh-solaris}: define the "standard" locations for
4381 the vendor supplied X11 headers and libraries
4383 Sun Nov 22 18:59:13 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4385 * configure.in: start building libg++ for HP-UX targets
4389 * README: Update references to files moved into etc/.
4393 * config.sub (i386sol2, i486sol2): i[34]86-unknown-solaris2.
4394 * configure.in (i[34]86-*-solaris2*): Use config/mh-sysv4.
4398 * configure: accept dash as well as underscore in long option
4399 names for FSF compatibility.
4403 * config.sub: added -sco3.2v4 support from FSF.
4405 Sun Nov 8 21:14:30 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4407 * configure.in: expand the section that adds or removes
4408 directories from the list of programs to build, to handle native
4409 vs. cross in addition to host v. native
4413 * Makefile.in: Replace C++ in macro names with CXX.
4414 This is less likely to break ...
4416 Sat Nov 7 15:16:58 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4418 * test-build.mk: add -w to GNU_MAKE
4420 Fri Nov 6 23:10:37 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4422 * config.sub: remove 'sparc'-->'sparc-sun' default transformation,
4423 add 'sparc' to list of recognized cpus. This needed to make
4424 'sparc-aout' expand to 'sparc-unknown-aout' instead of 'sparc-sun-aout'.
4425 Delete some redundant ose68 variants. Recognize -wrs as an os,
4426 then changes that into $CPU-wrs-vxworks.
4428 * configure.in: remove most references to gdbtest, regularize
4429 target based program removal
4431 * test-build.mk: import from p3 tree (many fixes and changes)
4435 * Makefile.in: added rules to handle tcl, tk, and expect
4437 * configure.in: handle those directories if they exist
4439 Thu Nov 5 14:35:41 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4441 * config.sub: removed bogus hppabsd and hppahpux names, since
4442 "hppa" is not a valid cpu (hppa1.1 or hppa1.0 are, though)
4444 Thu Oct 29 00:12:41 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4446 * Makefile.in: all-gcc now depends on all-binutils. all-libg++
4447 depends upon all-xiberty
4449 * Makefile.in: changes from p3, including:
4453 * Makefile.in (XTRAFLAGS): include newlib directories if
4454 newlib/Makefile exists, rather than if host != target.
4458 * Makefile.in: added -nostdinc to XTRAFLAGS if we are using gcc
4459 from the same source tree and not building a cross-compiler. This
4460 matters for the libg++ configuration if reconfiguring a tree that
4461 has already been installed.
4465 * Makefile.in: added -I for newlib/targ-include to XTRAFLAGS, to
4466 pick up the machine and system specific header files.
4468 * Makefile.in: added AS_FOR_TARGET, passed down in
4469 TARGET_FLAGS_TO_PASS. Added CC_FOR_BUILD, which is intended to be
4470 the C compiler to use to create programs which are run in the
4471 build environment, set it to default to $(CC), and passed it down
4472 in FLAGS_TO_PASS and TARGET_FLAGS_TO_PASS.
4476 * Makefile.in: add $(host) = $(target) tests back to *_FOR_TARGET.
4477 We need them for unusual native builds, like systems without
4480 * configure: also define $(host_canonical) and
4481 $(target_canonical), which are the full, canonical names for the
4482 given host and target
4486 * Makefile.in: Added separate definitions for C++.
4490 * configure.in (configdirs): Add deja-gnu.
4494 * README: Update for configure.texi and gdb-4.7 release.
4498 * Makefile.in: Move "all" target to top of file.
4499 Previously, first target was ".PHONY" which caused BSD4.4 make
4500 to build .PHONY when make was run without arguments.
4504 * Makefile.in: Add COPYING.LIB to GDB releases, now that there's
4505 Library-copylefted code in libiberty.
4509 * config.sub: Replace m68kmote with plain old m68k.
4513 * Makefile.in: Remove space from blank line, avoid Make complaints.
4517 * config.sub: Complain if no argument is given. Added support for
4518 386bsd as OS and target alias.
4522 * Makefile.in (XTRAFLAGS): include newlib directories if
4523 newlib/Makefile exists, rather than if host != target.
4525 Mon Oct 5 03:00:09 1992 Mark Eichin (eichin at tweedledumber.cygnus.com)
4527 * config.sub: recognize sparclite-wrs-vxworks.
4529 * Makefile.in (install-xiberty): added *-xiberty make rules (from
4530 p3.) Added clean-xiberty to clean.
4532 Thu Oct 1 17:59:19 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4534 * configure.in: use *-*-* instead of nested cases for host and target
4538 * Makefile.in: added -nostdinc to XTRAFLAGS if we are using gcc
4539 from the same source tree and not building a cross-compiler. This
4540 matters for the libg++ configuration if reconfiguring a tree that
4541 has already been installed.
4545 * config.sub (i486v/i486v4): Merge in from FSF version.
4549 * configure: only set PWD if it is already set.
4553 * configure: just set PWD=`pwd` at the top, since Ultrix sh
4554 doesn't have unset and all success paths (and most error paths)
4555 out set it anyway. (Note: should change all uses of ${PWD=`pwd`}
4556 to just ${PWD} to avoid confusion.)
4560 * configure: always set $(tooldir) to $(libdir)/$(target_alias),
4561 even for a native compilation.
4565 Changes to make the gdb.tar.Z rule work better.
4567 * Makefile.in (GDB_SUPPORT_DIRS): Add opcodes.
4568 (DEVO_SUPPORT): Add configure.texi.
4569 (bfd-ilrt.tar.Z): Remove ancient rule.
4573 * Makefile.in: added -I for newlib/targ-include to XTRAFLAGS, to
4574 pick up the machine and system specific header files.
4576 * configure.in, config.sub: added new target m68010-adobe-scout,
4577 with alias of adobe68k. Changed configure.in to check for
4578 -scout before -sco* to avoid a false match.
4580 * Makefile.in: added AS_FOR_TARGET, passed down in
4581 TARGET_FLAGS_TO_PASS. Added CC_FOR_BUILD, which is intended to be
4582 the C compiler to use to create programs which are run in the
4583 build environment, set it to default to $(CC), and passed it down
4584 in FLAGS_TO_PASS and TARGET_FLAGS_TO_PASS.
4588 * Makefile.in: added TARGET_FLAGS_TO_PASS, CC_FOR_TARGET,
4589 AR_FOR_TARGET, RANLIB_FOR_TARGET, NM_FOR_TARGET. Pass
4590 TARGET_FLAGS_TO_PASS, which defines CC, AR, RANLIB and NM as the
4591 FOR_TARGET variants, to newlib and libg++.
4595 * Makefile.in (all-gas, all-gdb): Require all-opcodes to be built
4600 * config.sub: Accept `elf' as an environment.
4604 * Makefile.in (all-opcodes): cd into the right directory
4608 * configure: added -program_transform_name option, used as
4609 argument to sed when installing programs.
4610 configure.texi: added documentation for -program_prefix,
4611 -program_suffix and -program_transform_name.
4615 * config.sub: Accept i486 where i386 ok.
4619 * config.sub: accept we32k
4623 * config.sub, configure.in: accept OSE68000 and OSE68k.
4625 * Makefile.in: don't create all directories for ``make install'';
4626 let the subdirectories create the ones they need.
4628 Tue Aug 11 23:13:17 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4630 * COPYING: new file, GPL v2
4632 Tue Aug 4 01:12:43 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4634 * Makefile.in: use the new gen-info-dir, which needs a template
4635 argument (which also lives in texinfo)
4637 * configure.texi, standards.texi: fix INFO-DIR-ENTRY
4639 Mon Aug 3 15:41:28 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4641 * config/mh-solaris: removed the -xs from CFLAGS (let the people
4642 with Sun's C compiler deal with it themselved)
4646 * config.sub (ncr3000): Change i386 to i486.
4648 Thu Jul 23 00:12:17 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4650 * Makefile.in: add install-rcs, install-grep to
4651 install-no-fixedincludes, removed install-bison and install-libgcc
4655 * configure.in: grab the HPUX makefile fragment if on HPUX
4659 * Makefile.in: eradicate bison spoor (ditto libgcc).
4660 configure.in: recognise m68{k,000}-ericsson-OSE.
4661 es1800 is alias for m68k-ericsson-OSE
4663 Sun Jul 19 17:49:02 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4665 * configure.in: rearrange the parts that remove programs from
4666 configdirs, based now on HOST==TARGET or by canonical triple.
4670 * test-build.mk: recurse explicitly with -f test-build.mk when
4671 appropriate. predicate stage3 and comparison on the existence
4672 of gcc. That is, if gcc isn't around, we aren't three-staging.
4673 On very clean, also remove ...stamp-co. Build in-place before
4678 * Makefile.in, configure.in: add tgas
4682 * Makefile.in: a number of changes merged in from progressive.
4684 * configure.in: add libm.
4686 * .cvsignore: ignore some stuff that comes from test-build.mk.
4688 Wed Jul 8 00:01:30 1992 Stu Grossman (grossman at cygnus.com)
4690 * config/mh-solaris: Use -xs when compiling so that Sun-C puts
4691 a symbol-table into the executable.
4695 * config.sub: Add es1800 (m68k-ericsson-es1800).
4699 * configure: Add program_suffix (parallel to program_prefix)
4700 * Makefile.in: adjust directory-creating script for losing decstation
4704 * configure: Minor $subdir-related fixes.
4708 * configure: fix various problems with propogating
4709 makefile_target_frag in subdirs.
4710 * configure.in: config libgcc if its there
4712 Fri Jun 19 15:19:40 1992 Stu Grossman (grossman at cygnus.com)
4714 * config.sub: HPPA merge.
4718 * config/mh-ncr3000 (INSTALL): Don't use /usr/ucb/install,
4719 it is broken on ncr 3000's.
4721 Sun Jun 14 10:29:19 1992 John Gilmore (gnu at cygnus.com)
4723 * Makefile.in: Replace all-bison with all-byacc in all
4724 dependency lines for other tools (which now use byacc).
4726 Fri Jun 12 22:21:57 1992 John Gilmore (gnu at cygnus.com)
4728 * config.sub: Add sun4sol2 => sparc-sun-solaris2.
4730 Tue Jun 9 17:18:11 1992 Fred Fish (fnf at cygnus.com)
4732 * config/{mh-ncr3000, mh-sysv4}: Add INSTALL.
4736 * Makefile.in: make gprof rules similar to byacc rules (instead of
4737 vestigal $(unsubdir) that didn't work...)
4741 * config.sub: Add support for Linux.
4742 * Makefile.in: Use $(FLAGS_TO_PASS) more consistently
4743 (at least for libg++).
4747 * configure.texi: fix doc for the -nfp option to configure
4751 * Makefile.in (all-binutils): ar needs flex, so depend on all-flex.
4753 Sun May 31 15:04:08 1992 Mark Eichin (eichin at cygnus.com)
4755 * config.sub: changed [^-]+ to [^-][^-]* so that it works under
4756 Sun sed. (BSD 4.3 sed doesn't handle [^-]+ either.)
4757 * configure.in: added solaris* host_makefile_frag hook.
4759 Sun May 31 01:10:34 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4761 * config.sub: changed recognition of m68000 so that various
4762 m68k types can be specified via m680[01234]0
4764 Sat May 30 21:01:06 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4766 * config.sub (basic_machine): fix sed so that '-foo' isn't
4767 completely substituted out while .+'-foo' loses the '-foo'
4771 * config.sub ($os): Add -aout.
4775 * configure: If host_makefile_frag is absolute, don't
4776 prefix ${invsubdir} (relevant to libg++ auto-configure).
4780 * Makefile.in (tooldir): Define it.
4781 (all-ld): Depend on all-flex.
4785 * Makefile.in (check): Fix libg++ special case.
4789 * configure: do not bury `pwd` into config.status, thus do fewer
4792 * configure: print the "Building in" message only when building in
4793 other than "." AND verbose.
4795 * configure: remove -s, rework -v to better accomodate guested
4798 * standards.texi: updated to 3 may, fixed librid <-> libdir typo.
4802 * Makefile.in: macroize flags passed on recursion. remove
4807 * configure: get makesrcdir right for subdirs deeper than 1.
4809 * Makefile.in: pass INSTALL, INSTALL_DATA, INSTALL_PROGRAM on
4814 * Makefile.in: don't print subdir_do or recursion lines.
4818 * standards.texi: added menu item.
4820 * Makefile.in: build and install standards.info.
4822 * standards.texi: new file.
4826 * configure: test for and move config.status pieces from
4831 * config/mh-delta88, config/mh-ncr3000: Replace MINUS_G with
4832 CFLAGS per new configuration strategy.
4833 * configure: Test for existance of files before trying to mv
4834 them, to avoid numerous non-existance messages.
4838 * configure: correct final line of config.status.
4840 * configure: patch from eggert. Avoids a protection problem if
4841 the original Makefile.in is read only.
4843 * configure: use move-if-change from gcc to create config.status.
4844 Some makefiles depend on config.status to tell if a directory
4845 has been reconfigured for a different host. This change
4846 prevents those directories from remaking everything in the case
4847 where the reconfig was only intended to rebuild a Makefile.
4849 * configure: test for config.sub with "config.sub sun4" rather
4850 than "config.sub ${host_alias}". Otherwise we can't tell a bad
4851 host alias from a missing config.sub.
4855 * Makefile.in: explicitly pass CFLAGS on recursion. no longer pass
4856 MINUS_G (this can be done with CFLAGS). Default CFLAGS to -g.
4860 * configure: mkdir ${subdir} as needed.
4864 * Makefile.in,configure.in: added autoconf.
4868 * Makefile.in: no longer pass against on recursion.
4870 * Makefile.in: added .NOEXPORT: so that stray makefile_frag
4871 definitions are not inherited.
4873 * configure: correct makesrcdir when subdir is .
4877 * configure: Add support for 'subdirs' variable, which is
4878 like 'configdirs', except that configure doesn't re-invoke
4879 itself for subdirs, it just creates a Makefile for each subdir.
4880 * configure.texi: Document subdirs.
4882 Mon Apr 13 18:50:16 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4884 * configure.in: added flex to configdirs
4888 * Makefile.in: remove clean-stamps from clean.
4890 Sat Apr 11 03:52:03 1992 John Gilmore (gnu at cygnus.com)
4892 * configure.in: Add gdbtest to configdirs.
4896 * Makefile.in (MINUS_G): Add macro, default to -g, pass on
4898 * configure.in: Recognize new ncr3000 config.
4902 * Makefile.in, configure.in: removed references to gdbm.
4906 * config.sub: Don't canonicalize os value
4907 newsos* to bsd (readline needs to check for newsos).
4908 (This fix was earlier made Jan 31, but got re-broken.)
4910 Mon Apr 6 14:34:08 1992 Stu Grossman (grossman at cygnus.com)
4912 * configure.in: sco is an os, not a vendor!
4914 * configure: Quote $( better. Keep various shells happy.
4918 * Makefile.in: eliminate stamp-files.
4922 * Makefile.in: add send_pr. remove "force" from .stmp-gprof rule.
4923 Supress echoing of all the "if [ -d ... $(MAKE)" lines.
4927 * config.sub: fix iris/iris3.
4931 * configure: re-add -rm.
4935 * Maskefile.in: add .stmp-rcs to all.
4937 * configure.in: remove gas from rs6000 build, use aix host fragment.
4941 * configure: pass down site_option during recursion.
4943 Thu Mar 19 16:49:36 1992 Stu Grossman (grossman at cygnus.com)
4945 * Makefile.in (all.cross): Add .stmp-bfd .stmp-readline.
4949 * configure: Change exec_prefix so that it really defaults to prefix.
4953 * Makefile.in, configure.in: Add support for mmalloc library.
4957 * Makefile.in: add stmp dependencies for a few more things.
4961 * configure: adjusted error message on objdir/srcdir configure
4962 collision, per john's suggestion.
4964 * Makefile.in: add libiberty stmp to all and all.cross.
4968 * Makefile.in: remove force dependencies, add grep to all.
4972 * Makefile.in: drop flex. make stamp files work.
4974 * configure: added test for conflicting configuration in srcdir,
4975 remove trailing slashes from srcdir. Otherwise emacs gdb mode
4976 gets cranky. use relative paths for configure and srcdir
4977 whenever possible. Send some error messages to stderr that were
4982 * Makefile.in: Fix libg++ rule to check for gcc directory
4983 before using gcc/gcc. Also pass XTRAFLAGS.
4985 Thu Mar 5 21:45:07 1992 K. Richard Pixley (rich@sendai)
4987 * Makefile.in: added stmp-files so that directories aren't polled
4988 when they are already built.
4990 * configure.texi: fixed a node pointer problem.
4992 Thu Mar 5 12:05:58 1992 Stu Grossman (grossman at cygnus.com)
4994 * config.sub configure.in config/mh-irix4 gdb/configure.in
4995 gdb/mips-tdep.c gdb/mipsread.c gdb/procfs.c gdb/signame.h
4996 gdb/tm-irix3.h gdb/tm-mips.h gdb/xm-irix4.h gdb/config/mt-irix3
4997 gdb/config/mh-irix4 texinfo/configure.in: Port to SGI Irix-4.x.
5001 * configure: -recurring becomes -silent. corrected help message
5004 * Makefile.in: mkdir $(exec_prefix) and $(tooldir).
5008 * configure: when building Makefile for crosses, replace
5009 tooldir and program_prefix. default srcdir from location of
5010 config.sub. remove "for host in hosts" and "for target in
5015 * Makefile.in: Do not pass bindir or mandir to cvs.
5019 * Makefile.in, configure.in: removed traces of namesubdir,
5020 -subdirs, $(subdir), $(unsubdir), some rcs triggers. Forced
5021 copyrights to '92, changed some from Cygnus to FSF.
5023 * configure.texi: remove most references to multiple hosts,
5024 multiple targets, subdirs, etc.
5026 * configure.man: removed rcsid. reference config.sub not
5029 * Makefile.in: mkdir $(infodir) on install-info.
5031 Wed Feb 19 15:41:13 1992 John Gilmore (gnu at cygnus.com)
5033 * configure.texi: Explain better about .gdbinit and about
5034 the environment that configure.in sections run in.
5036 Fri Feb 7 07:55:00 1992 John Gilmore (gnu at cygnus.com)
5038 * configure.in: Ultrix is only a decstation if it's a MIPS.
5040 Fri Jan 31 21:54:51 1992 John Gilmore (gnu at cygnus.com)
5042 * README: DOC.configure => cfg-paper.texi.
5044 Fri Jan 31 21:48:18 1992 Stu Grossman (grossman at cygnus.com)
5046 * config.sub (near case $os): Don't convert newsos* to bsd!
5048 Fri Jan 31 02:27:32 1992 John Gilmore (gnu at cygnus.com)
5050 * Makefile.in: Reinstall change from gdb-4.3 that reduces
5051 the number of copies of COPYING that go into the GDB tar file.
5053 Thu Jan 30 16:17:30 1992 Stu Grossman (grossman at cygnus.com)
5055 * bfd/configure.in, config/mh-sco, gdb/config/mh-i386sco,
5056 gdb/config/mt-i386v32, gdb/configure.in, readline/configure.in:
5057 Fix SCO configuration stuff.
5059 Tue Jan 28 23:51:07 1992 Per Bothner (bothner at cygnus.com)
5061 * Makefile.in: For libg++, make sure the -I pointing
5062 to the gcc directory goes *after* all the libg++-local -I flags.
5063 Also, move just-gcc dependency from just-libg++ to all-libg++.
5065 Tue Jan 28 12:56:24 1992 Stu Grossman (grossman at cygnus.com)
5067 * configure: Change -x to -f to keep Ultrix /bin/test happy.
5069 Sat Jan 18 17:45:11 1992 Stu Grossman (grossman at cygnus.com)
5071 * Makefile.in (make-gdb.tar.Z): Remove texinfo targets.
5073 Sat Jan 18 17:03:21 1992 Fred Fish (fnf at cygnus.com)
5075 * config.sub: Add stratus configuration frags. Also
5078 Sat Jan 18 15:35:29 1992 Stu Grossman (grossman at cygnus.com)
5080 * Makefile.in (DEV_SUPPORT): add configure.man.
5082 * config.sub(Decode manufacturer-specific): add -none*.
5084 Fri Jan 17 17:58:05 1992 Stu Grossman (grossman at cygnus.com)
5086 * Makefile.in: remove form feeds to make Sun's make happy.
5087 (DEVO_SUPPORT): DOC.configure => cfg-paper.texi.
5089 Sat Jan 4 16:11:44 1992 John Gilmore (gnu at cygnus.com)
5091 * Makefile.in (AR_FLAGS): Make quieter.
5093 Thu Jan 2 22:57:12 1992 John Gilmore (gnu at cygnus.com)
5095 * configure.in: Add libg++.
5096 * configure: When verbose, don't output the command line at each
5097 level; it will be unremarkably the same as the previous version,
5098 which will be the same as what the user typed.
5100 Fri Dec 27 16:26:47 1991 K. Richard Pixley (rich at cygnus.com)
5102 * configure.in, Makefile.in: fix clean-info, add flex. add
5105 * configure: be less sensitive to spaces in Makefile.in. Do not
5106 look for sources in "..". Doing so breaks subdirectories that
5107 might have their own configure. If a subdir has it's own
5108 configure script, use it.
5110 Thu Dec 26 16:30:26 1991 K. Richard Pixley (rich at cygnus.com)
5112 * cfg-paper.texi: some changes suggested by rms.
5114 Thu Dec 26 10:13:36 1991 Fred Fish (fnf at cygnus.com)
5116 * config.sub: Merge in some small additions from the FSF version,
5117 taken from the gcc distribution, to bring the Cygnus and FSF
5118 versions into closer sync.
5120 Fri Dec 20 11:34:18 1991 Fred Fish (fnf at cygnus.com)
5122 * configure.in: Changed svr4 references to sysv4.
5124 Thu Dec 19 15:54:29 1991 K. Richard Pixley (rich at cygnus.com)
5126 * configure: added -V for version number option.
5128 Wed Dec 18 15:39:34 1991 K. Richard Pixley (rich at cygnus.com)
5130 * DOC.configure, cfg-paper.texi: revised, updated, and texinfo'd.
5131 renamed from DOC.configure to cfg-paper.texi.
5133 Mon Dec 16 23:05:19 1991 K. Richard Pixley (rich at rtl.cygnus.com)
5135 * configure, config.subr, config.sub: config.subr is now
5138 Fri Dec 13 01:17:06 1991 K. Richard Pixley (rich at cygnus.com)
5140 * configure.texi: new file, in progress.
5142 * Makefile.in: build info file and install the man page for
5145 * configure.man: new file, first cut.
5147 * configure: find config.subr again now that configuration "none"
5148 has gone. removed all traces of the -ansi option. removed all
5149 traces of the -languages option.
5151 * config.subr: resync from rms.
5153 Wed Dec 11 22:25:20 1991 K. Richard Pixley (rich at rtl.cygnus.com)
5155 * configure, config.sub, config.subr: merge config.sub into
5156 config.subr, call the result config.subr, remove config.sub, use
5159 * Makefile.in: revised install for dir.info.
5161 Tue Dec 10 00:04:35 1991 K. Richard Pixley (rich at rtl.cygnus.com)
5163 * configure.in: add decstation host makefile frag.
5165 * Makefile.in: BISON now bison -y again. also install-gcc on
5166 install. clean-gdbm on clean. infodir belongs in datadir.
5167 Make directories for info install. Build dir.info here then
5170 Mon Dec 9 16:48:33 1991 K. Richard Pixley (rich at rtl.cygnus.com)
5172 * Makefile.in: fix for bad directory tests.
5174 Sat Dec 7 00:17:01 1991 K. Richard Pixley (rich at rtl.cygnus.com)
5176 * configure: \{1,2\} appears to be a sysv'ism. Use a different
5177 regexp. -srcdir relative was being handled incorrectly.
5179 * Makefile.in: unwrapped some for loops so that parallel makes
5180 work again and so one can focus one's attention on a particular
5183 Fri Dec 6 00:22:08 1991 K. Richard Pixley (rich at rtl.cygnus.com)
5185 * configure: added PWD as a stand in for `pwd` (for speed). use
5186 elif wherever possible. make -srcdir work without -objdir.
5187 -objdir= commented out.
5189 Thu Dec 5 22:46:52 1991 K. Richard Pixley (rich at rtl.cygnus.com)
5191 * configure: +options become --options. -subdirs commented out.
5192 added -host, -datadir. Renamed -destdir to -prefix. Comment in
5193 Makefile now at top of generated Makefile. Removed cvs log
5194 entries. added -srcdir. create .gdbinit only if there is one
5197 * Makefile.in: idestdir and ddestdir go away. Added copyrights
5198 and shift gpl to v2. Added ChangeLog if it didn't exist. docdir
5199 and mandir now keyed off datadir by default.
5201 Fri Nov 22 07:38:11 1991 K. Richard Pixley (rich at rtl.cygnus.com)
5203 * Freshly created ChangeLog.
5210 version-control: never