3 * configure.in: Add support for an x86_64-mingw* target.
7 * configure.in: Use DEV-PHASE to detect the default for --enable-werror.
8 * configure: Regenerate.
12 * Makefile.def (target_modules): Add libgcc.
13 (lang_env_dependencies): Remove default items. Use no_c and no_gcc.
14 * Makefile.tpl (clean-target-libgcc): Delete.
15 (configure-target-[+module+]): Emit --disable-bootstrap dependencies
16 on gcc even for bootstrapped modules. Rewrite handling of
17 lang_env_dependencies to loop over target_modules.
18 * configure.in (target_libraries): Add target-libgcc.
19 * Makefile.in, configure: Regenerated.
26 * configure.in: Reorganize recognition of languages. Add
27 --enable-stage1-languages. Show supported languages for the chosen
28 target rather than all recognized languages.
29 * configure: Regenerate.
33 * Makefile.tpl (GCC_STRAP_TARGETS, all-prebootstrap): Remove.
34 * Makefile.in: Regenerate.
38 * configure.in: Warn that MPFR 2.2.0 is buggy.
39 * configure: Regenerate.
43 * configure.in: When removing Makefiles to force a reconfigure, also
44 remove prev-DIR*/Makefile.
45 * configure: Regenerate.
49 * config.bfd: Recognize fido.
57 * configure.in: Remove "$build" case for powerpc-*-darwin* since
58 it only affects bootstrap and could be tested on "$host" as well.
59 * configure: Regenerate.
60 * config/mh-ppc-darwin: Add to the stage1 cflags here.
65 * Makefile.def (flags_to_pass): Add STAGE1_CHECKING.
66 (bootstrap_stage): Add STAGE1_CHECKING to stage1 configure flags,
67 move here comment from Makefile.tpl.
68 * Makefile.tpl: Move some definitions higher in the file.
69 (STAGE1_CHECKING): New.
70 * configure.in: Add --enable-stage1-checking.
71 * configure: Regenerate.
72 * Makefile.in: Regenerate.
76 * configure.in: Update error message for missing GMP/MPFR.
78 * configure: Regenerate.
82 * configure.in: Update MPFR version in error message.
84 * configure: Regenerate.
88 * configure.in (--with-mpfr-dir, --with-gmp-dir): Remove flags.
89 (--with-mpfr-include, --with-mpfr-lib, --with-gmp-include,
90 --with-gmp-lib): New flags.
92 * configure: Regenerate.
97 * configure.in: Correct x86 darwin support for libjava to powerpc
99 * configure: Regenerate.
103 * configure.in: Handle spu makefile frag.
104 * config/mt-spu: New file.
105 * Makefile.tpl (MAINT): Define
106 (MAINTAINER_MODE_FALSE, MAINTAINER_MODE_TRUE): Define.
107 * configure: Regenerate.
108 * Makefile.in: Regenerate.
112 * config.sub, config.guess: Update from upstream sources.
116 * configure.in: Sync with GCC (spu-*-*).
117 * configure: Sync with GCC.
121 * Makefile.def (dependencies): Add dependency for
122 install-target-libssp and install-target-libgomp on
124 * Makefile.in: Regenerate.
128 * Makefile.tpl (clean-target-libgcc): Test for gcc Makefile presence.
129 (unstage): Test for stage_last presence.
132 * Makefile.tpl (POSTSTAGE1_FLAGS_TO_PASS): Add HOST_SUBDIR in STAGE_PREFIX.
133 * Makefile.in: Regenerate.
137 * Makefile.tpl (clean-stage*): Sync with GCC (clean).
138 * Makefile.in: Sync with GCC.
139 * configure.in: Sync with GCC (mpfr, gmp).
140 * configure: Sync with GCC.
144 * configure.in: Remove target-libgloss from noconfigdirs for
146 * configure: Regenerated.
150 * COPYING.NEWLIB: Add spu license.
151 * COPYING.LIBGLOSS: Ditto.
155 * Makefile.def: Added pdf target handling.
156 * Makefile.tpl: Added pdf target handling.
157 * Makefile.in: Regenerated.
161 * COPYING.NEWLIB: Updated.
162 * COPYING.LIBGLOSS: Ditto.
166 * configure.in (RUNTEST): Look for 'runtest' in the source tree by using
168 * configure: Regenerated.
172 * config.sub, config.guess: Update from upstream sources.
176 * configure.in: Remove redundant handling of mips*-dec-bsd*. Likewise
177 for mipstx39-*-*. Disable libgloss for mips64*-*-linux*.
178 * configure: Regenerate.
182 * configure.in: Never build newlib for a Mingw host.
183 Never build newlib as Mingw target library.
184 Test the existence of winsup/cygwin for building a Cygwin newlib,
185 rather than just winsup.
186 Add winsup/mingw and winsup/w32api paths to FLAGS_FOR_TARGET if
187 building a Mingw target.
188 * configure: Regenerate.
194 * config.sub: Add support for sde as alias of mipsisa32-sde-elf.
202 * configure.in: Add -fkeep-inline-functions to CFLAGS for stage 1
203 if the bootstrap compiler is a GCC version that supports it.
204 * configure: Regenerate.
208 * configure.in: Allow mingw32 and cygwin targets to build cross-gdb.
209 * configure: Regenerated.
213 * Makefile.tpl (configure-stageN-MODULE): Pass --with-build-libsubdir
214 for stages after the first.
218 * Makefile.def: Add dependencies for configure-opcodes
219 on configure-intl and all-opcodes on all-intl.
220 * Makefile.in: Regenerated.
224 * ltconfig: chmod 644 before ranlib during install.
228 * configure.in: Fix thinkos in previous check-in.
229 * configure: Regenerate.
238 * configure.in: Test subdir_requires and give an appropriate
240 * configure: Regenerate.
245 * configure.in: Only enable libgomp on IRIX 6.
246 * configure: Regenerate.
251 * configure.in: Add target-boehm-gc to noconfigdirs depending on
252 whether target-libjava is being configured instead of whether the
253 java front end is enabled.
254 * configure: Regenerate.
258 * include/elf/arm.h: Correct names of R_ARM_LDC_G{0,1,2}
259 to R_ARM_LDC_SB_G{0,1,2} respectively.
263 * Makefile.tpl (POSTSTAGE1_HOST_EXPORTS): Export CFLAGS and LDFLAGS
265 * Makefile.in: Regenerate.
272 * configure.in: Don't enable libgomp on hpux10.
273 * configure: Rebuilt.
283 * configure.in: Remove target-boehm-gc from noconfigdirs where
284 ${libgcj} is specified.
285 * configure: Regenerate.
295 * config-ml.in: Eval option if surrounded by single quotes.
304 * Makefile.def: Add dependencies for libobjc which boehm-gc.
305 * Makefile.in: Regenerate.
306 * configure.in: Add --enable-objc-gc at toplevel and have it
307 enable boehm-gc for Objective-C.
308 Remove target-boehm-gc from libgcj.
309 Add target-boehm-gc to target_libraries.
310 Add target-boehm-gc to noconfigdirs where ${libgcj}
312 Assert that boehm-gc is supported when requested for Objective-C.
313 Only build boehm-gc if needed either for Java or Objective-C.
314 * configure: Regenerate.
319 * Makefile.tpl (configure-[+prefix+][+module+],
320 all-[+prefix+][+module+]): Depend on stage_current if bootstrapping.
321 Remove rule to unstage bootstrapped modules.
322 (stage_current): New.
323 * Makefile.in: Regenerate.
328 * configure.in: Enable libgcj for hppa*-hp-hpux11*.
329 * configure: Rebuilt.
335 * Makefile.def (target_modules): Add libgcc-math target module.
336 * configure.in (target_libraries): Add libgcc-math target library.
337 (--enable-libgcc-math): New configure switch.
338 * Makefile.in: Re-generate.
339 * configure: Re-generate.
343 * config-ml.in: Alter CCASFLAGS to include special
344 multilib options the same as is done for CFLAGS.
348 * Makefile.def: Added dependencies from sim and gdb on intl, and
349 added configure dependencies to everything with an all dependency
351 * gettext.m4: Removed.
352 * src-release (DEVO_SUPPORT): Don't mention gettext.m4.
353 (GDB_SUPPORT_DIRS): Add intl.
354 * Makefile.in: Regenerated.
358 * src-release (DEVO_SUPPORT): Add config.rpath.
362 * Makefile.def (bfd, opcodes): Fix lib_path.
363 * Makefile.tpl (POSTSTAGE1_FLAGS_TO_PASS): Replace ADAC with ADAFLAGS.
364 (restrap): Move under "@if gcc-bootstrap". Fix typo.
365 * Makefile.in: Regenerate.
369 * configure.in: Enable gprof for cross builds.
370 * configure: Regenerate.
374 * src-release (MAKEINFOFLAGS): Define.
375 (do-proto-toplev): Pass MAKEINFOFLAGS to submakes.
379 * config.sub, config.guess: Update from upstream sources.
383 * config.sub, config.guess: Update from upstream sources.
387 * blt, iwidgets, mmalloc: Remove directories.
391 * configure.in: Restore CFLAGS if GMP isn't present.
392 * configure: Regenerate.
396 * configure.in (m32c): Build libstdc++-v3. Pass flags to
397 reference libgloss so that libssp can be built in a combined
399 * configure: Regenerate.
403 * contrib: Remove directory.
407 * Makefile.tpl: Add install-html target.
408 * Makefile.def: Add install-html target.
409 * Makefile.in: Regenerate.
410 * configure.in: Add --with-datarootdir, --with-docdir,
411 and --with-htmldir options.
412 * configure: Regenerate.
417 * configure.in: Require makeinfo 4.4 or higher.
418 * configure: Regenerate.
422 * Makefile.in: Regenerate.
429 * configure.in: Handle --disable-<component> generically.
430 * configure: Regenerate.
434 * Makefile.tpl (BUILD_CONFIGDIRS): Remove.
435 (TARGET_CONFIGDIRS): Remove.
436 * configure.in: Remove AC_SUBST(target_configdirs).
437 * Makefile.in, configure: Regenerated.
443 * ltmain.sh: Don't use "$finalize_rpath" for compile.
449 * Makefile.tpl ([+compare-target+]): Print explanation messages.
451 * Makefile.def (ADAFLAGS, BOOT_ADAFLAGS, LANGUAGES): New flags_to_pass.
452 * Makefile.tpl (BASE_FLAGS_TO_PASS): Support optional flags_to_pass.
453 (EXTRA_GCC_FLAGS): Remove ADAFLAGS, BOOT_ADAFLAGS, LANGUAGES,
454 BUILD_PREFIX, BUILD_PREFIX_1.
455 * configure.in: (BUILD_PREFIX, BUILD_PREFIX_1): Don't substitute.
457 * Makefile.def (bootstrap stage 1): Pass LIBCFLAGS too.
458 * Makefile.tpl (POSTSTAGE1_FLAGS_TO_PASS): Override LIBCFLAGS too.
460 * Makefile.tpl (configure-stage[+id+]-[+prefix+][+module+],
461 all-stage[+id+]-[+prefix+][+module+], : Use $(current_stage) instead
462 of `cat stage_current`. Always provide the `r' and `s' variables.
463 (clean-stage[+id+]-[+prefix+][+module+]): Likewise, and make it into
464 a single shell execution.
465 (configure-[+prefix+][+module+], all-[+prefix+][+module+]): For
466 bootstrapped modules, make the stage1 module if the build was not
467 started yet, else build the current stage.
468 (all-host, all-target): Omit bootstrapped modules (if bootstrapping).
469 (all-build, all-host, all-target, [+make_target+]-host,
470 [+make_target+]-target): Do not use \-continued lines.
471 (target modules): Depend on stage_last, not all-gcc, if bootstrapping.
472 (current_stage, restrap, stage_last): New.
474 * Makefile.in: Regenerate.
475 * configure: Regenerate.
484 * Makefile.def (target_modules): Add libgcc-math target module.
485 * configure.in (target_libraries): Add libgcc-math target library.
486 (--enable-libgcc-math): New configure switch.
487 * Makefile.in: Re-generate.
488 * configure: Re-generate.
489 * libgcc-math: New toplevel directory.
495 * libgomp: New directory.
496 * Makefile.def: Add target_module libgomp.
497 * Makefile.in: Regenerate.
498 * configure.in (target_libraries): Add target-libgomp.
499 * configure: Regenerate.
504 * configure: Regenerate.
508 * configure.in: Set with_gnu_as, with_gnu_ld, with_newlib earlier.
509 Set md_exec_prefix. Use ACX_CHECK_INSTALLED_TARGET_TOOL to find
510 the assembler, linker and binutils.
511 * configure: Regenerate.
515 * config.sub, config.guess: Sync from config repository.
519 * Makefile.tpl (clean-stage[+id+]-[+prefix+][+module+]): Remove
521 * Makefile.in: Rebuilt.
531 * Makefile.def (flags_to_pass): Add STAGE1_CFLAGS and STAGE1_LANGUAGES.
532 * Makefile.tpl (OBJDUMP): New.
533 (EXTRA_HOST_FLAGS): Add it.
534 (EXTRA_GCC_FLAGS): Remove flags already specified in flags_to_pass.
536 * Makefile.tpl (stage[+id+]-start, stage[+id+]-end): Do not try
537 to use symbolic links between directories. Avoid race conditions
538 or make them harmless.
539 * configure.in: Do not try to use symbolic links between directories.
541 * Makefile.def (LEAN): Pass.
542 * Makefile.tpl (LEAN): Define.
543 (stage[+id+]-start): Accept that the previous directory does not
544 exist, if the bootstrap is lean.
545 (stage[+id+]-bubble): Invoke lean bootstrap commands after
546 stage[+id+]-start. Use a makefile variable and an `if' instead of a
547 configure substitution.
548 ([+compare-target+]): Likewise.
549 ([+bootstrap-target+]-lean): New.
550 * configure.in: Remove lean bootstrap support from here.
552 * Makefile.in: Regenerate.
553 * configure: Regenerate.
557 * configure.in: When reconfiguring remove Makefile in
558 all stage directories.
559 * configure: Regenerate.
563 * configure.in: Add support for RDOS target.
564 * configure: Regenerate.
569 * libtool.m4: Synchronize with version in GCC sources.
573 Revert Ada-related part of the previous change.
575 * Makefile.def (ADAFLAGS, BOOT_ADAFLAGS, ADAFLAGS_FOR_TARGET):
577 * Makefile.tpl (BOOT_ADAFLAGS): Do not define.
578 * Makefile.in: Regenerate.
579 * configure.in: Do not include mt-ppc-aix target fragment.
580 * configure: Regenerate.
584 * configure.in: Select appropriate fragments for PowerPC/AIX.
585 * configure: Regenerate.
587 * Makefile.def (flags_to_pass): Add ADAFLAGS, BOOT_ADAFLAGS,
588 BOOT_CFLAGS, BOOT_LDFLAGS.
589 * Makefile.tpl (POSTSTAGE1_FLAGS_TO_PASS): Handle BOOT_ADAFLAGS,
590 BOOT_CFLAGS, BOOT_LDFLAGS.
591 (TARGET_FLAGS_TO_PASS): Handle ADAFLAGS_FOR_TARGET.
592 (stage[+id+]-bubble): Pass flags recursively to the comparison target.
593 (stage): Fail if we cannot complete the work.
594 * Makefile.in: Regenerate.
598 * COPYING.NEWLIB: Update copyright year for default
603 * Makefile.tpl (all, do-[+make_target+], do-check, install,
604 install-host-nogcc): Don't invoke $(stage) at the end.
605 * Makefile.in: Regenerate.
609 * configure.in: Flip the top-level bootstrap switch.
610 * configure: Regenerate.
616 * Makefile.tpl: Throughout the file, use : $(MAKE) along with
617 $(stage) and $(unstage).
618 (EXTRA_TARGET_FLAGS): Correct double-quoting.
619 (all): Remove stray semicolon.
620 (local-distclean): Don't handle multilib.tmp and multilib.out.
621 (install.all): Set $s for consistency.
622 (configure-[+prefix+][+module+]): Instead of [+deps+], handle
623 check_multilibs setting. Always make the install directory.
624 (configure-stage[+id+]-[+prefix+][+module+]): Likewise.
626 (all-stage[+id+]-[+prefix+][+module+]): Correct @if/@endif.
627 ($(TARGET_SUBDIR)/[+module+]/multilib.out): Remove.
628 (stage[+id+]-start, stage[+id+]-end): Stage $(TARGET_SUBDIR).
629 (multilib.out): Remove.
630 * Makefile.in: Regenerated.
634 * config.sub: Replace ms1 arch with mt. Allow ms1 as alias.
635 * configure.in: Replace ms1 arch with mt.
636 * configure: Rebuilt.
644 * config.sub: Replace ms1 arch with mt. Allow ms1 as alias.
645 * configure.in: Replace ms1 arch with mt.
646 * configure: Rebuilt.
654 * configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4,
655 CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove
656 "CONFIGURED_" from the AC_CHECK_PROGS invocation. Move below.
657 Find in-tree tools if available.
658 (EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them.
659 (CONFIGURED_*_FOR_TARGET): Don't set nor substitute.
660 (*_FOR_TARGET): Set them with GCC_TARGET_TOOL.
661 (COMPILER_*_FOR_TARGET): New.
662 * Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs.
663 (BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols.
664 (CONFIGURED_*, USUAL_*): Remove.
665 (BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO,
666 STRIP): Use autoconf substitutions.
667 (COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET,
668 COMPILER_NM_FOR_TARGET): New.
669 (EXTRA_HOST_FLAGS): Pass LIPO and STRIP.
671 (all): Make all-host and all-target in parallel.
672 (do-[+make_target+], do-check, install, [+compare-target+]): Ensure
673 that $$r and $$s are set before invoking a recursive make.
674 (stage[+id+]-bubble): Likewise, and invoke the comparison at the end.
675 ([+bootstrap-target+]): Inline most of the `all' target.
679 * Makefile.tpl (clean-target-libgcc): Invoke clean-target-libgcc
680 from the gcc build directory.
681 * Makefile.in: Regenerate.
685 * Makefile.def: Add new libdecnumber host_module. Make all-gcc
686 depend on all-libdecnumber.
687 * configure.in (host_libs): Include libdecnumber.
688 * Makefile.in: Regenerate.
689 * configure: Likewise.
693 * config.sub, config.guess: Sync from upstream sources.
697 * Makefile.def: Remove gdb dependencies for gdbtk.
698 * Makefile.tpl (CONFIGURE_GDB_TK, INSTALL_GDB_TK): New variables.
699 (configure-gdb, install-gdb): New rules.
700 * configure.in: Set CONFIGURE_GDB_TK and INSTALL_GDB_TK.
701 * Makefile.in, configure: Regenerated.
706 * Makefile.tpl (do-[+make-target+], do-check, install,
707 stage[+id+]-bubble, [+compare-target+]): Ensure $$r and $$s
708 are set before recursing.
709 * Makefile.in: Regenerate.
714 * Makefile.def (gcc) <target>: Fix thinko.
715 * Makefile.in: Regenerate.
719 * configure.in (bfin-*-*): Use test, not brackets, in if statement.
720 * configure: Regenerate.
724 * configure.in (arm-*-linux-gnueabi): Add to noconfigdirs
725 target-libffi, target-qthreads, target-libjava, and
727 * configure: Regenerate.
731 * Makefile.def (flags_to_pass): Add OBJDUMP_FOR_TARGET.
732 * Makefile.tpl (BASE_TARGET_EXPORTS): Add OBJDUMP.
733 (OBJDUMP_FOR_TARGET, CONFIGURED_OBJDUMP_FOR_TARGET)
734 (USUAL_OBJDUMP_FOR_TARGET): New.
735 (EXTRA_TARGET_FLAGS): Add OBJDUMP.
736 * configure.in: Check for $OBJDUMP_FOR_TARGET.
737 * configure, Makefile.in: Regenerated.
741 * Makefile.tpl (all) [gcc-no-bootstrap]: Make prebootstrap packages
742 before other host packages.
748 * configure.in (default_target): Remove.
749 * Makefile.tpl (all): Do not use prerequisites as subroutines
750 (all) [gcc-bootstrap]: Bootstrap gcc first if it was not done yet.
751 (do-[+make_target+], check, install, [+bootstrap_target+]): Do not
752 use prerequisites as subroutines.
753 (check-host, check-target): New.
754 (bootstrap configure & all targets): Do not use stage*-start
755 if the directory layout is already ok.
756 (non-bootstrap configure & all targets): Prepend a $(unstage).
757 (stage[+id+]-bubble): Do that here. Do not use NOTPARALLEL.
758 (NOTPARALLEL): Remove.
759 (unstage, stage variables): New variables.
760 (unstage, stage targets): Simply expand to those variables.
762 * configure: Regenerate.
763 * Makefile.in: Regenerate.
767 * Makefile.def (lang_env_dependencies): Add libmudflap.
768 * Makefile.in: Regenerate.
772 * configure.in (bfin-*-*): Support bfin.
773 * configure: Regenerated.
777 * configure.in (*-*-darwin*): Build bfd, binutils and opcodes.
778 * configure: Regenerated.
782 * Makefile.tpl (BASE_TARGET_EXPORTS): Add LIPO, STRIP.
783 (LIPO_FOR_TARGET): New.
784 (CONFIGURED_LIPO_FOR_TARGET): New.
785 (USUAL_LIPO_FOR_TARGET): New.
786 (STRIP_FOR_TARGET): New.
787 (CONFIGURED_STRIP_FOR_TARGET): New.
788 (USUAL_STRIP_FOR_TARGET): New.
789 * Makefile.def (flags_to_pass): Add LIPO_FOR_TARGET and
791 * configure.in: Set LIPO_FOR_TARGET, STRIP_FOR_TARGET,
792 CONFIGURED_LIPO_FOR_TARGET, CONFIGURED_STRIP_FOR_TARGET.
793 * Makefile.in: Regenerate.
794 * configure: Regenerate.
798 * configure.in (powerpc-*-aix*): Add target-libssp to noconfigdirs.
799 (rs6000-*-aix*): Same.
800 * configure: Regenerate.
804 * configure.in: Recognize f95 in the --enable-languages option,
805 and substitute it for fortran, issuing a warning.
806 * configure: Regenerate.
810 Import from Autoconf sources:
813 * move-if-change: Don't output "$2 is unchanged"; suggested by Ben
814 Elliston. Handle weird characters correctly.
818 * configure.in (*-*-vxworks*): Add target-libstdc++-v3 to noconfigdirs.
819 * configure: Regenerated.
823 * Makefile.def (libssp): Add to lang_env_dependencies.
824 * Makefile.in: Regenerate.
828 * Makefile.tpl: (USUAL_CC_FOR_TARGET): Add missing trailing slash.
829 * Makefile.in: Regenerate.
833 * configure.in: Replace NCN_STRICT_CHECK_TOOL with
834 NCN_STRICT_CHECK_TOOLS, and likewise for NCN_STRICT_CHECK_TARGET_TOOLS.
835 Look for alternate names of the target cc and c++
836 * configure: Regenerate.
840 * configure.in (CC_FOR_TARGET, CXX_FOR_TARGET, GCJ_FOR_TARGET,
841 GCC_FOR_TARGET, RAW_CXX_FOR_TARGET, GFORTRAN_FOR_TARGET): Find
842 them with NCN_STRICT_CHECK_TARGET_TOOL, like the other target
843 tools; remove code to manually set them.
844 (Target tools): Look in the environment for them.
845 * Makefile.tpl (CC_FOR_TARGET, CXX_FOR_TARGET, GCJ_FOR_TARGET,
846 GCC_FOR_TARGET, RAW_CXX_FOR_TARGET, GFORTRAN_FOR_TARGET): Redefine.
847 (AS_FOR_TARGET, LD_FOR_TARGET, NM_FOR_TARGET): Look into gcc
849 (CONFIGURED_CC_FOR_TARGET, CONFIGURED_CXX_FOR_TARGET,
850 CONFIGURED_GCJ_FOR_TARGET, CONFIGURED_GCC_FOR_TARGET,
851 CONFIGURED_GFORTRAN_FOR_TARGET, USUAL_CC_FOR_TARGET,
852 USUAL_CXX_FOR_TARGET, USUAL_GCJ_FOR_TARGET, USUAL_GCC_FOR_TARGET,
853 USUAL_RAW_CXX_FOR_TARGET, USUAL_GFORTRAN_FOR_TARGET): New.
854 (CXX_FOR_TARGET_FOR_RECURSIVE_MAKE,
855 RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE, RECURSE_FLAGS): Delete.
856 * configure: Regenerate.
857 * Makefile.in: Regenerate.
861 * Makefile.tpl (EXTRA_TARGET_FLAGS): Set LDFLAGS=LDFLAGS_FOR_TARGET.
862 * Makefile.def (flags_to_pass): Add LDFLAGS_FOR_TARGET.
863 * Makefile.in: Regenerated.
867 * Makefile.tpl (SYSROOT_CFLAGS_FOR_TARGET): New variable.
868 (CFLAGS_FOR_TARGET): Use it.
869 (CXXFLAGS_FOR_TARGET): Likewise.
870 * Makefile.in: Regenerated.
871 * configure.in (--with-build-sysroot): New option.
872 * configure: Regenerated.
876 * Makefile.tpl: Wrap install between unstage and stage
877 * Makefile.in: Regenerate.
881 * all files: Update FSF address.
885 * configure.in: Add cases for Renesas m32c.
886 * configure: Regenerated.
890 * COPYING, compile, config-ml.in, config.guess,
891 config.sub, install-sh, missing, mkinstalldirs,
892 symlink-tree, ylwrap: Sync from upstream sources.
896 * configure.in: Add toplevel noconfigdir support for tpf.
897 * configure: Regenerate.
901 * Makefile.def (target_modules): Add libssp.
902 * configure.in (target_libraries): Add target-libssp.
903 * configure: Rebuilt.
904 * Makefile.in: Rebuilt.
910 * Makefile.def: Sync with gcc.
911 * Makefile.tpl (POSTSTAGE1_FLAGS_TO_PASS): Fix pasto.
912 * Makefile.in: Regenerate.
916 * Makefile.def (flags_to_pass): Add CFLAGS_FOR_BUILD.
917 * Makefile.tpl (EXTRA_GCC_FLAGS): Don't pass CFLAGS_FOR_BUILD here.
918 * Makefile.in: Regenerated.
922 * configure.in: Add --enable-libssp and --disable-libssp.
923 * configure: Regenerate with autoconf-2.13.
927 * configure.in: Don't build sim or rda when targetting darwin.
928 * configure: Regenerate.
932 * src-release (do-proto-toplev): Remove dejagnu bits.
933 (DEJAGNU_SUPPORT_DIRS): Remove.
934 (dejagnu.tar.bz2, dejagnu.tar): Likewise.
935 (GDBD_SUPPORT_DIRS): Likewise.
936 (gdb+dejagnu.tar.bz2, gdb+dejagnu.tar): Likewise.
937 (INSIGHTD_SUPPORT_DIRS): Likewise.
938 (insight+dejagnu.tar.bz2, insight+dejagnu.tar): Likewise.
942 * setup.com (mpw): Remove unused directive.
946 * Makefile.def (stagefeedback): Come after profile.
947 Define profiledbootstrap target.
948 * Makefile.tpl (profiledbootstrap): Remove.
949 (stageprofile-end): Zap stagefeedback.
950 (stagefeedback-start): Copy all .gcda files, not only GCC's.
951 * Makefile.in: Regenerate.
955 * depcomp: Update from automake CVS. Add 'ia64hp' stanza.
956 In 'cpp' stanza, support '#line' as well as '# '.
960 * configure.in (unsupported_languages): New macro.
961 <mmix-knuth-mmixware>: Set unsupported_languages. Name explicit
962 non-ported target libraries in noconfigdirs.
963 <cris-*, crisv32-*> Ditto, except for non-aout, non-elf,
964 non-linux-gnu. Remove libgcj_ex_libffi.
965 <lang_frag loop>: Set add_this_lang=no if the language is in
966 unsupported_languages.
967 * configure: Regenerate.
971 * configure.in: Fix typo in handling of --with-mpfr-dir.
972 * configure: Regenerate.
976 * config.sub: Add cases for the Renesas m32c. (This patch has been
977 accepted into the master sources.)
983 * configure.in: Set noconfigdirs for ms1.
985 * configure: Regenerate.
989 * Makefile.tpl (stage[+id+]-start): Iterate over target module as well.
990 (Dependencies): Consider target modules for bootstrap dependencies.
991 Make target bootstrap modules depend on each stage's gcc.
992 * Makefile.in: Regenerate.
996 * Makefile.def (configure-gcc): Depend on binutils having been built.
997 (all-gcc): No need to do it here.
998 * Makefile.in: Regenerate.
1002 * configure.in: Rewrite misleading error message when requested
1003 language cannot be built.
1004 * configure: Regenerate.
1008 * ylwrap: Import from Automake 1.9.5.
1012 * configure.in: Always pass --target to target configures as
1013 otherwise rebuilds that do --recheck will fail.
1014 * configure: Rebuilt.
1018 * Makefile.tpl (POSTSTAGE1_HOST_EXPORTS): Rename from
1020 (configure, all): Add bootstrap support.
1021 (Host modules, target modules): Pass post-stage1 flags and exports.
1022 (Top-level bootstrap): Remove bootstrap rules, expanded elsewhere.
1023 * Makefile.in: Regenerate.
1031 * config.sub: Update from master copy.
1035 * configure.in <crisv32-*-*, cris-*-*>: New local variable
1036 libgcj_ex_libffi. Have specific match for *-*-linux*. Separate
1037 matches for "*-*-aout" and "*-*-elf". Don't disable libffi for
1038 "*-*-elf" and "*-*-linux*".
1039 * configure: Regenerate.
1043 * Makefile.tpl (BUILD_CONFIGARGS): Include --with-build-subdir.
1044 (TARGET_CONFIGARGS): Include --with-target-subdir.
1045 (configure, all): New macros. Use them throughout.
1049 * Makefile.tpl: Sync with gcc.
1050 * Makefile.in: Regenerate.
1054 * config/mh-mingw32: Delete.
1055 * configure.in: Don't use it.
1056 * configure: Regenerate.
1060 * Makefile.def (bfd, opcodes, libstdc++-v3, libmudflap): Set lib_path.
1061 * Makefile.tpl (SET_LIB_PATH, REALLY_SET_LIB_PATH): Remove.
1062 (HOST_EXPORTS, STAGE_HOST_EXPORTS, TARGET_EXPORTS): Set $(RPATH_ENVVAR).
1063 (HOST_LIB_PATH): Generate from Makefile.def.
1064 (TARGET_LIB_PATH): Likewise.
1065 (Old bootstrap targets): Include TARGET_LIB_PATH into RPATH_ENVVAR.
1066 * Makefile.in: Regenerate.
1067 * configure.in (set_lib_path, SET_LIB_PATH, SET_GCC_LIB_PATH): Remove.
1068 (RPATH_ENVVAR): Include Darwin case.
1069 * configure: Regenerate.
1073 * configure.in (RPATH_ENVVAR): Set to DYLD_LIBRARY_PATH on Darwin.
1074 * configure: Regenerate.
1078 * Makefile.def: Remove libstdcxx_incdir, libsubdir, gxx_include_dir,
1079 gcc_version, and gcc_version_trigger from set of flags to pass.
1080 * Makefile.tpl: Remove definitions of above variables.
1081 (config.status): Remove dependency on $(gcc_version_trigger).
1082 * Makefile.in: Regenerate.
1083 * configure.in: Do not reference config/gcc-version.m4 nor
1084 config/gxx-include-dir.m4. Do not invoke TL_AC_GCC_VERSION nor
1085 TL_AC_GXX_INCLUDE_DIR. Do not set gcc_version_trigger.
1086 * configure: Regenerate.
1091 * Makefile.tpl (check-[+module+]): Fix shell statement inside if ... fi.
1092 * Makefile.in: Regenerate.
1097 * ltmain.sh: Avoid creating archives with components that have
1098 duplicate basenames.
1103 * Makefile.tpl (HOST target installs): Fix copy and pasto, use install
1105 * Makefile.in: Regenerate.
1114 * Makefile.def (target_modules): Remove "stage", now unnecessary.
1115 * Makefile.tpl (HOST_SUBDIR): New substitution.
1116 (STAGE_HOST_EXPORTS, EXPECT, HOST_LIB_PATH, USUAL_AR_FOR_TARGET,
1117 USUAL_AS_FOR_TARGET, USUAL_DLLTOOL_FOR_TARGET, USUAL_GCC_FOR_TARGET,
1118 USUAL_LD_FOR_TARGET, USUAL_NM_FOR_TARGET, USUAL_OBJDUMP_FOR_TARGET,
1119 USUAL_RANLIB_FOR_TARGET, USUAL_WINDRES_FOR_TARGET): Use it.
1120 (Host modules, Bootstrapped modules): Use it.
1121 (Build modules, Target modules): Do not create symlink trees,
1122 always configure out-of-srcdir.
1123 (distclean): Try removing $(host_subdir) with rm before using rm -rf.
1124 * configure.in (FLAGS_FOR_TARGET, CC_FOR_TARGET, GCJ_FOR_TARGET,
1125 GFORTRAN_FOR_TARGET, CXX_FOR_TARGET, RAW_CXX_FOR_TARGET): Use
1126 $(HOST_SUBDIR). Create a symlink for host_subdir.
1128 * Makefile.in: Regenerate.
1129 * configure: Regenerate.
1131 Merged from libada-gnattools-branch:
1134 * Makefile.def: Add gnattools as a module, depending on target-libada.
1135 * Makefile.in: Regenerate.
1136 * configure.in: Include gnattools in host_tools; disable it if ada
1138 * configure: Regenerate.
1142 * configure: Regenerate.
1146 * configure.in: Allow darwin targeted ports to build tk, itcl and
1152 * configure.in (noconfigdirs) <sparc-*-solaris2.[0-6]>: Add libgcj.
1153 * configure: Regenerate.
1157 * MAINTAINERS: Delete reference to dejagnu/ and mmalloc/ from the
1158 gdb/ section. Update GDB's URL.
1162 * gettext.m4: Only set ENABLE_NLS when gettext is present.
1166 * configure.in (noconfigdirs) <crisv32-*-*>: Match like cris-*-*.
1167 <crisv32-*-*, cris-*-*>: Only disable target-newlib and
1168 target-libgloss when not *-*-elf and *-*-aout.
1169 * configure: Regenerate.
1173 * gettext.m4: Don't use NONE as a default for CATOBJEXT.
1177 * gettext.m4: Only fall back to ../intl/ when it's present.
1181 * install-sh, config.sub: Import from upstream.
1186 * Makefile.def: Pass CPPFLAGS_FOR_TARGET.
1187 * Makefile.tpl: Define target CPPFLAGS on CPPFLAGS_FOR_TARGET.
1188 * Makefile.in: Regenerate.
1192 Revert 2004-12-28 Makefile changes, a better fix will be
1193 applied to mainline and src after GCC 4.0 branches.
1199 * Makefile.def (target_modules): Remove stage parameter,
1200 it is always true now.
1201 * Makefile.tpl (configure-build-[+module+],
1202 configure-target-[+module+]): Always build symlink tree
1203 for the directory and for include. BUILD_SUBDIR and
1204 TARGET_SUBDIR cannot be . anymore.
1205 * Makefile.in: Regenerate.
1209 Revert 2004-12-08 Makefile changes.
1213 * configure.in (sh64-*-*): Reenable gprof.
1214 * configure: Regenerate.
1218 * MAINTAINERS: List 'depcomp' as part of automake.
1222 * Makefile.def (flags_to_pass): Add PICFLAG_FOR_TARGET.
1223 * Makefile.tpl (EXTRA_HOST_FLAGS): Add PICFLAG.
1224 (EXTRA_TARGET_FLAGS): Add PICFLAG.
1225 * Makefile.in: Regenerate.
1229 * Makefile.tpl: Generate normal dependencies if the LHS module is
1231 * Makefile.in: Regenerate.
1235 * configure.in: Include config/gxx-include-dir.m4. Use
1236 TL_AC_GXX_INCLUDE_DIR. Remove some now-redundant AC_SUBSTs.
1237 * configure: Regenerate.
1241 * config.if: Delete.
1242 * configure.in: Set libstdcxx_incdir directly.
1243 * configure: Regenerate.
1244 * MAINTAINERS: Remove mention of config.if.
1245 * src-release (DEVO_SUPPORT): Remove config.if.
1249 * Makefile.tpl (clean-target-libgcc): Add stmp-dirs to list
1250 of things to remove.
1251 * Makefile.in: Regenerate.
1255 * configure.in: Clear gcc_version_trigger if the file doesn't exist.
1256 * configure: Regenerate.
1260 * configure.in: Include config/gcc-version.m4. Use TL_AC_GCC_VERSION
1261 to set gcc_version_trigger. Remove some now-redundant AC_SUBSTs.
1262 * configure: Regenerate.
1266 * configure.in (hppa*-*-linux*): Don't add libgcj to noconfigdirs.
1267 (hppa*64*-*-*): Delete incorrect comment.
1268 * configure: Rebuilt.
1272 * install-sh, compile: Import from automake.
1276 * config.guess, config.sub: Import from savannnah.
1280 * Makefile.def: Add html support.
1281 * Makefile.tpl: Likewise.
1282 * Makefile.in: Regenerate.
1287 * configure.in: Remove all instances of build-fixincludes from
1289 (build_configargs): Supply --target to subdirectories.
1290 * configure: Regenerate.
1292 * Makefile.def: Make gcc install depend on fixincludes install.
1293 * Makefile.in: Regenerate.
1297 * configure.in (noconfigdirs) [mmix-*-*]: Disable
1299 * configure: Regenerate.
1303 * config-ml.in: Pass FCFLAGS for multilibs, handle GFORTRAN
1308 * Makefile.def (host fixincludes): Specify missing targets.
1309 * Makefile.in: Regenerate.
1314 * configure.in: Set up LD_LIBRARY_PATH by default for gcc.
1315 * configure: Regenerated.
1319 * configure.in (arm-*-oabi*, thumb-*-oabi*): Remove.
1320 * configure: Regenerated.
1325 * configure.in (case ${target}): Do not build fixincludes for avr.
1326 * configure: Regenerated.
1330 * configure.in (case ${target}): Do not build fixincludes
1331 on platforms where it is not used.
1332 * configure: Regenerated.
1336 * configure.in: Use an absolute path to install-sh.
1337 * configure: Regenerated.
1341 * src-release (do-djunpack, do-md5sum): Install the generated file
1342 directly into the proto-toplev/ directory.
1346 * src-release (GDB_SUPPORT_DIRS): Remove utils and intl.
1350 * configure.in (*-*-cygwin*): Supress warning if newlib not present.
1351 * configure: Regenerate.
1355 Fix wrong conflict resolution in:
1359 * Makefile.in: Regenerate.
1360 * Makefile.tpl (Autogenerated `all-*' targets): Invoke $(TARGET-*)
1361 in the recursive `make', instead of hardwiring `all'.
1362 (Autogenerated TARGET-* variables): New.
1366 Merged from GCC / libtool upstream:
1368 * ltcf-c.sh (tpf*): Add ld_shlibs=yes.
1369 * ltcf-cxx.sh (tpf*): Likewise.
1370 * ltconfig (tpf*): Add TPF OS configuration support.
1374 * configure.in: Enable target-libgloss for crx-*-*.
1375 * configure: Regenerate.
1379 * configure.in (--without-headers): Add missing double quotes.
1380 * configure: Regenerate.
1384 * ylwrap: Revert to previous version.
1389 * Makefile.tpl (REALLY_SET_LIB_PATH): Add @SET_GCC_LIB_PATH@.
1390 (HOST_EXPORTS]): Add @SET_GCC_LIB_PATH@. Set and export
1391 SET_GCC_LIB_PATH_CMD.
1392 (BASE_TARGET_EXPORTS): Likewise.
1393 * Makefile.in: Regenerated.
1395 * configure.in (SET_GCC_LIB_PATH): Set and substitute.
1396 * configure: Regenerated.
1400 * config.guess: New upstream version
1401 * compile, depcomp, install-sh, ylwrap: Likewise.
1405 * config/mh-x86omitfp: New host makefile fragment. Add
1406 -fomit-frame-pointer to the default BOOT_CFLAGS.
1407 * configure.in: Use it to speed up bootstrap on some IA-32 hosts.
1408 * configure: Regenerate.
1413 * configure.in (*-*-darwin*): Renable libobjc.
1414 * configure: Regenerate.
1418 * Makefile.def: Remove libbanshee.
1419 * Makefile.tpl: Ditto.
1420 * configure.in: Ditto.
1421 * Makefile.in: Regen.
1426 * missing: Import latest version from master repository.
1430 * config.sub: Import latest version from master repository.
1431 * config.guess: Likewise.
1432 This includes these changes:
1436 * config.sub: Handle crisv32, alias etraxfs.
1437 * config.guess (crisv32:Linux:*:*): Handle.
1441 * config.guess (*:OpenBSD:*:*): Remove defunct MIPS machines.
1442 (sgi:OpenBSD:*:*): Emit mips64, not mipseb.
1446 * config.guess (*:Darwin:*:*): If uname -p reports "unknown",
1447 assume the processor is a powerpc. This is because coreutils
1448 uname (at least versions 4.5.7 through 5.2.1) outputs "unknown"
1449 in this case, due to a MacOS X bug that causes
1450 sysctl ((int[]) {CTL_HW, HW_MACHINE_ARCH}, 2, buffer, &bufsize, 0, 0)
1451 to return a negative number.
1452 Problem reported by Petter Reinholdtsen in:
1453 http://lists.gnu.org/archive/html/bug-gnu-utils/2003-02/msg00201.html
1457 * config.guess (S7501:*:4.0:3.0): Handle NCR System V UNIX machine.
1461 * config.guess: Update copyright years.
1462 * config.sub: Likewise.
1466 * config.guess (*:FreeBSD:*:*): Remove check for glibc (unneeded
1467 since GNU/kFreeBSD systems match *:GNU/*:*:* instead).
1471 * config.guess (*:*VMS:*:*): New entry. Replaces
1472 Alpha:OpenVMS:*. Recognize and advertise all VMS flavors as dec
1478 * config.sub: Likewise.
1483 * config.sub: Correctly handle mmix-knuth and mmix-knuth-mmixware.
1487 * config.guess (pegasos:OpenBSD:*:*): Remove.
1492 * config.guess (M68*:*:R3V[5678]:*): Detect R3V8.
1496 * config.guess (luna88k:OpenBSD:*:*): New.
1500 * config.guess (m32r*:Linux:*:*): New case.
1501 * config.sub: Handle m32rle.
1506 * config.sub: Handle sparcv8.
1511 * config.guess: Version suffixes are equally significant on Tru64
1512 V4.* and V5.*, so do not ignore them on V5.*. Handle a version
1513 prefix of "P" (patched kernel).
1517 * config.sub: Add support for National Semiconductor CRX target.
1521 * configure.in: Remove target-libstdc++-v3 from noconfigdirs for
1522 *-*-netware, but add target-libmudflap.
1523 Consolidate *-*-netware targets (of which really only i?86 exists)
1524 into a single entry.
1525 * configure: Likewise.
1529 * Makefile.tpl (sorry): Remove.
1530 (clean-stage[+id+], clean-stage[+id+]-module): New targets.
1531 (cleanstrap targets): Depend on distclean, not distclean-stage1.
1532 (do-clean): Clean per-stage directories too.
1533 (do-distclean): Run distclean-stage1 too.
1534 (.NOTPARALLEL): Enable during toplevel bootstrap.
1535 (stage[+id+]-bubble): Enable parallel execution during
1536 the recursive invocation.
1537 * Makefile.in: Regenerate.
1539 Sync from gcc (moving the Makefile.in change to Makefile.tpl):
1543 * Makefile.in: Move BOOT_CFLAGS above host makefile fragment include.
1544 * configure.in: add test for powerpc-*-darwin* to specify makefile frag
1545 * configure: regenerate
1546 * config/mh-ppc-darwin: create file, override BOOT_CFLAGS for
1551 * Makefile.tpl: Move BOOT_CFLAGS above host makefile fragment
1553 * configure.in: Fix indentation.
1554 * configure: Regenerate.
1558 * Makefile.def (build_modules): Add fixincludes.
1559 (dependencies): Make gcc depend on fixincludes.
1560 * configure.in (build_tools): Add fixincludes.
1561 (build_configdirs): Always include build_libs.
1562 * Makefile.in: Regenerate.
1563 * configure: Regenerate.
1567 * Makefile.def (bootstrap stages): Add 'lean' parameter.
1568 * Makefile.tpl (configure-stageN-*, all-stageN-*): Turned into
1569 phony targets; do not generate timestamp files.
1570 (distclean-stageN): Remove references to their timestamp files.
1571 (restageN, touch-stageN): Remove.
1572 (stageN-bubble): Rewritten.
1573 (compare): Support lean bootstraps.
1574 * Makefile.in: Regenerate.
1576 * configure.in: Only warn when bootstrapping but
1577 build != host or build != target. Support lean bootstraps.
1578 * configure: Regenerate.
1583 * configure.in: Give a better error message if GMP/MPFR are missing
1584 and a language needing them has been requested.
1585 * configure: Regenerated.
1589 * configure.in: Print a list of available language front-ends if
1590 a requested one is missing. Tidy stray tab characters.
1591 * configure: Regenerated.
1595 * Makefile.in: Regenerate.
1596 * configure: Regenerate.
1598 * Makefile.def (bootstrap-stage): Rename extra_*_flags to
1600 * Makefile.tpl (configure-[+module+], all-[+module+]): Exit
1601 for bootstrapped modules if toplevel bootstrap is going.
1602 (GCC bootstrap): Generate per-stage targets for all bootstrapped
1603 modules. Adjust for changes in Makefile.def. Enable several
1604 rules even in non-bootstrap mode, just to avoid peppering the
1605 template with unnecessary "@if/@endif gcc-bootstrap" pairs.
1606 (stage-[+prev+]-bubble): Remove.
1608 * Makefile.def (Dependencies): Depend on all-build-bison,
1609 all-build-flex, all-build-byacc, all-build-texinfo, rather
1610 than the host variations.
1611 * Makefile.tpl (BUILD_DIR_PREFIX): Remove. Replace throughout
1613 (BISON): Update for recent Bisons.
1615 (cross): Depend on all-build.
1616 (all): Do not depend on all-build.
1617 (prebootstrap): Remove.
1618 (dep-kind): Accept separate prefixes for MODULE and ON variables.
1619 (Prebootstrap dependencies): Add them to the per-stage targets
1620 and to all-prebootstrap.
1621 * configure.in (build_configdirs): Always enable build_tools.
1622 (BUILD_DIR_PREFIX): Remove.
1624 * Makefile.def (gcc): Add target variable.
1625 (gdb, expect, guile, tk, tix): Replace with_x with extra_make_flags.
1626 * Makefile.tpl (Autogenerated `all-*' targets): Invoke $(TARGET-*)
1627 in the recursive `make', instead of hardwiring `all'.
1628 (Autogenerated TARGET-* variables): New.
1632 * configure.in: In noconfigdirs check, match GNU/k*BSD with GNU/Linux
1633 (instead of FreeBSD).
1634 * configure: Regenerate.
1638 * Makefile.def, configure.in, src-release: Remove useless, bogus
1640 * Makefile.in, configure: Regenerate.
1642 * src-release: Stop distributing mmalloc with gdb (which doesn't
1644 * Makefile.def: GDB doesn't depend on mmalloc anymore.
1645 * Makefile.in: Regenerate.
1649 * configure.in (arm*-*-eabi*): New target.
1650 * configure: Regenerate.
1654 * configure.in: Turn mt-linux into mt-gnu. Use mt-gnu and enable
1655 libmudflap for all GNU-based systems (with Glibc).
1656 * configure: Regenerate.
1660 * Makefile.def (bfd, opcodes, gcc, zlib): Mark as bootstrap module.
1661 (bison, byacc, flex, texinfo): Do not mark as bootstrap module.
1662 (Dependencies): New section.
1663 * Makefile.tpl (Dependencies): Generate from Makefile.def.
1664 (configure-target-[+module+]): Depend on maybe-all-gcc
1665 (all-prebootstrap): New name of all-bootstrap. Changed throughout.
1666 (toplevel profiledbootstrap): Fix dependencies.
1667 * Makefile.in: Regenerate.
1671 * configure.in (arm*-*-symbianelf*): Add ${libgcj} and
1672 target-libiberty to noconfigdirs.
1676 * configure.in: Check for MPFR as well as GMP.
1677 * configure: Regenerate.
1681 * Makefile.def (host-modules): Add gcc.
1682 * Makefile.in: Regenerate.
1683 * Makefile.tpl (sorry): New rule.
1684 (configure-host, all-host, [+make_target+]-host, do-check,
1685 install-host): Do not add gcc as a special case.
1686 (host modules): Add a small special-casing for gcc. Export
1687 extra_make_flags through the environment.
1688 (maybe-configure-gcc, configure-gcc, maybe-all-gcc, all-gcc,
1689 maybe-check-gcc, check-gcc, maybe-install-gcc, install-gcc,
1690 other recursive targets for gcc): Remove.
1692 (all, do-[+make_target+], do-check): Wrap between unstage and stage.
1693 (stage, unstage): New rules.
1694 (stage[+id+]-start, stage[+id+]-end, [+compare-target+],
1695 distclean-stage[+id+]): Use stage_current.
1696 ([+bootstrap-target+], profiledbootstrap): Do not invoke manually
1697 the stage*-start rules.
1705 Add patches from libtool CVS.
1706 * libtool.m4: Add kfreebsd*-gnu and knetbsd*-gnu.
1707 * ltconfig: Likewise.
1708 * ltcf-c.sh: Likewise.
1709 * ltcf-cxx.sh: Likewise.
1710 * ltcf-gcj.sh: Likewise.
1714 * configure.in: Add noconfigdirs for crx-*-*.
1715 * configure: Regenerate.
1723 * configure.in: Build libmudflap by default on FreeBSD.
1724 * configure: Regenerated.
1728 * configure.in: Do not build libmudflap by default on non-GNU/Linux
1730 * configure: Regenerated.
1735 * Makefile.tpl (profiledbootstrap): Build runtime libraries with
1736 feedback based compiler.
1737 * Makefile.in: Rebuilt.
1741 * configure.in: Do not prepend $srcdir to /dev/null in
1743 * configure: Regenerate.
1747 * Makefile.def (host_modules): Set bootstrap=true for flex.
1748 * Makefile.tpl (all-gcc): Depend on texinfo and flex.
1749 * Makefile.in: Rebuilt.
1753 * Makefile.def (build_modules): Add bison, byacc, flex,
1755 (flags_to_pass): Add FLEX.
1756 * Makefile.tpl (BUILD_DIR_PREFIX, BASE_EXPORTS): New.
1757 (BUILD_EXPORTS, HOST_EXPORTS, BASE_TARGET_EXPORTS): Include it.
1758 (DEFAULT_YACC, USUAL_YACC, DEFAULT_LEX, USUAL_LEX, DEFAULT_M4,
1759 DEFAULT_MAKEINFO): Remove.
1760 (CONFIGURED_YACC, CONFIGURED_FLEX, CONFIGURED_BISON,
1761 CONFIGURED_LEX, CONFIGURED_M4, CONFIGURED_MAKEINFO): Substitute.
1762 (YACC, FLEX, BISON, LEX, M4, MAKEINFO): Define to look into
1763 objdir or else use configured tool.
1765 (all): Depend on it.
1766 (Build module dependencies): Add.
1767 * Makefile.in: Regenerate.
1768 * configure.in: Better support for multiple build modules,
1769 matching what is done for host/target modules. Do not look
1770 for "plausible" locations of build tools if Canadian cross.
1771 Use autoconf's AC_PROG_CC to find a C compiler. Define
1772 BUILD_DIR_PREFIX. Look for flex, makeinfo and m4.
1773 * configure: Regenerate.
1777 * Makefile.tpl (HOST_EXPORTS): Fix pasto.
1778 * Makefile.in: Regenerate.
1782 * Makefile.tpl (configure-build-[+module+],
1783 configure-[+module+], configure-target-[+module+]): Pass
1784 [+extra_configure_args+].
1785 (all-build-[+module+], all-[+module+], check-[+module+],
1786 install-[+module+], [+make_target+]-[+module+],
1787 all-target-[+module+], check-target-[+module+],
1788 install-target-[+module+], [+make_target+]-target-[+module+]):
1789 Pass [+extra_make_args+].
1790 (HOST_EXPORTS): Include the former GCC_HOST_EXPORTS.
1791 (GCC_HOST_EXPORTS): Remove.
1792 (configure-gcc, all-gcc, GCC_STRAP_TARGETS, profiledbootstrap,
1793 cross, check-gcc, check-gcc-c++, install-gcc,
1794 gcc-no-fixedincludes, [+make_target+]-gcc, stage[+id+]-bubble):
1795 Replace GCC_HOST_EXPORTS with HOST_EXPORTS.
1796 * Makefile.in: Regenerate.
1800 * configure.in: Check for srcdir/winsup rather than build directory
1802 * configure: Regenerate.
1806 * configure.in: Don't build Cygwin native newlib if winsup
1807 directory is missing. Emit warning instead.
1808 * configure: Regenerate.
1812 * Makefile.tpl (touch-stage[+id+]): New.
1813 (restage[+prev+]): Depend on touch-stage[+id+].
1815 * Makefile.tpl (RECURSE_FLAGS_TO_PASS): New.
1818 * Makefile.def: Add profile and feedback bootstrap stages.
1819 Remove next field from bootstrap stages.
1820 * Makefile.tpl (LN, LN_S): Substitute.
1821 (stageN-start, stageN-end): Use double-colon rules, to
1822 provide a hook for additional setup commands.
1823 (distclean-stageN-gcc, restageN): Create dependencies from
1824 [+prev+], not from [+next+].
1825 (stageN-bubble): Add commands for successive stages from
1826 [+prev+], using double-colon rules.
1827 (all-stageN-gcc): Fix typo.
1828 (stagefeedback-start, profiledbootstrap): New.
1829 * Makefile.in: Regenerate.
1830 * configure.in: Call ACX_PROG_LN.
1831 * configure: Regenerate.
1835 * configure.in: Fix --enable-bootstrap breakage introduced in trees
1837 * configure: Regenerate.
1841 * Makefile.tpl: Fix typo.
1842 * Makefile.in: Regenerate.
1846 * configure.in: Remove new- prefix from toplevel
1848 * configure: Regenerate.
1852 Merge this patch from the gcc tree:
1857 * config-ml.in: Pass FFLAGS and ADAFLAGS for multilibs, handle F77
1862 * Makefile.tpl (all.normal): Rename to all.
1863 (all): Replace with a rule to pick the default
1864 target from configure.
1865 (all-gcc, configure-gcc): Use conditionals to
1866 do nothing when toplevel bootstrap is going on.
1867 (GCC directory bootstrap) [gcc-bootstrap]: Disable.
1868 (Toplevel bootstrap) [gcc-no-bootstrap]: Disable.
1869 * configure.in: Support --enable-bootstrap.
1871 * Makefile.def: Remove new- prefix from toplevel
1873 * Makefile.tpl: Likewise.
1875 * Makefile.def: Add bootstrap_stage 4. Add bootstrap2
1878 * Makefile.tpl (Toplevel bootstrap): Pass $(BASE_FLAGS_TO_PASS)
1879 $(RECURSE_FLAGS) to recursive invocation of make.
1881 * Makefile.in: Regenerate.
1882 * configure: Regenerate.
1886 * configure.in: Fix sed invocation for GFORTRAN_FOR_TARGET.
1887 * configure: Regenerate.
1891 * Makefile.tpl (BUILD_EXPORTS, HOST_EXPORTS, GCC_HOST_EXPORTS)
1892 (STAGE_HOST_EXPORTS, BASE_TARGET_EXPORTS, RAW_CXX_TARGET_EXPORTS)
1893 (NORMAL_TARGET_EXPORTS): New macros. Use them in all the recursive
1895 * Makefile.in: Regenerate.
1899 * configure.in: Test the ability to symlink directories.
1900 * configure: Regenerate.
1902 * Makefile.def (bootstrap-stage): New definitions.
1903 * Makefile.tpl (configure-stage1-gcc,
1904 configure-stage2-gcc, configure-stage3-gcc,
1905 all-stage1-gcc, all-stage2-gcc, all-stage3-gcc,
1906 new-bootstrap, new-cleanstrap, new-restage1, new-restage2,
1907 new-restage3, compare): Autogenerate, see Makefile.in
1908 entry for behavioral changes.
1909 (distclean-stage1, new-stage1-start, new-stage1-end,
1910 new-stage1-bubble, distclean-stage2, new-stage2-start,
1911 new-stage2-end, new-stage2-bubble, distclean-stage3,
1912 new-stage3-start, new-stage3-end): New autogenerated targets.
1913 (objext, prebootstrap, BOOT_CFLAGS,
1914 POSTSTAGE1_FLAGS_TO_PASS): Move above the autogenerated
1917 * Makefile.in: Regenerate.
1918 (distclean-stage1, new-stage1-start, new-stage1-end,
1919 new-stage1-bubble, distclean-stage2, new-stage2-start,
1920 new-stage2-end, new-stage2-bubble, distclean-stage3,
1921 new-stage3-start, new-stage3-end): New targets.
1922 (all-stage1-gcc): Move prebootstrap dependency from here...
1923 (configure-stage1-gcc): ...to here.
1924 (new-bootstrap): Use bubble targets.
1925 (new-cleanstrap, new-restage1, new-restage2, new-restage3):
1926 Use per-stage distclean targets.
1927 (configure-stage1-gcc, configure-stage2-gcc,
1928 configure-stage3-gcc, all-stage1-gcc,
1929 all-stage2-gcc, all-stage3-gcc, new-bootstrap):
1930 Use new-stageN-start to prepare the tree.
1934 * Makefile.def (host_modules): add libcpp.
1935 * Makefile.tpl: Add dependencies on and for libcpp.
1936 * Makefile.in: Regenerate.
1937 * configure.in: Add libcpp host module.
1938 * configure: Regenerate.
1942 * Makefile.def, Makefile.tpl, configure.in: Remove all mention
1944 * configure, Makefile.in: Regenerate.
1948 Merge from tree-ssa-20020619-branch.
1950 * Makefile.def: Add libbanshee, libmudflap and libgfortran.
1951 * Makefile.tpl (BUILD_CONFIGDIRS): Add libbanshee.
1952 (HOST_GMPLIBS): Define.
1953 (HOST_GMPINC): Define.
1954 (TARGET_LIB_PATH): Add libmudflap.
1955 (GFORTRAN_FOR_TARGET): Define.
1956 (configure-build*): Export GFORTRAN.
1957 (configure-gcc): Export GMPLIBS and GMPINC.
1958 (all-gcc): Add maybe-all-libbanshee.
1959 (configure-target-libgfortran): Define.
1960 * Makefile.in: Regenerate.
1961 * configure.in (host_libs): Add libbanshee.
1962 (target_libraries): Add target-libmudflap and target-libgfortran.
1963 Add --with-libbanshee.
1964 Handle --disable-libmudflap.
1965 (*-*-freebsd*): Use with_gmp.
1966 Add $(libgcj) to noconfigdirs.
1967 * configure: Regenerate.
1968 * depcomp: New file.
1969 * MAINTAINERS: Add tree-ssa maintainers.
1973 * config/acx.m4: Fix fastcompare support for new-bootstrap.
1974 * configure: Regenerate.
1981 * Makefile.def (flags_to_pass): Remove *dir variables that
1982 are passed to the modules via TOPLEVEL_CONFIGURE_ARGUMENTS,
1983 as well as prefix and exec_prefix.
1984 * Makefile.in: Regenerate.
1988 * Makefile.def (host_modules): Mark with the bootstrap
1989 flag packages on which gcc depends.
1990 * Makefile.tpl (all-bootstrap): Use it.
1991 * Makefile.in: Regenerate.
1995 * Makefile.def (flags_to_pass): Remove *dir variables that
1996 are passed to the modules via TOPLEVEL_CONFIGURE_ARGUMENTS,
1997 as well as prefix and exec_prefix.
1998 * Makefile.in: Regenerate.
2002 * configure.in: Invoke ACX_PROG_CMP_IGNORE_INITIAL.
2003 * configure: Regenerate.
2004 * config/acx.m4: Mutuate ACX_PROG_CMP_IGNORE_INITIAL from gcc.
2005 * gcc/Makefile.tpl (compare): Use the result of the test.
2006 * gcc/Makefile.in: Regenerate.
2010 * Makefile.tpl (all-stage1-gcc, all-stage2-gcc, all-stage3-gcc):
2011 Always relocate gcc and prev-gcc to the original names, even
2013 (new-cleanstrap, new-restage1, new-restage2, new-restage3):
2018 * configure.in (mips*-*-irix5*): Enable ld.
2019 * configure: Regenerate.
2023 * Makefile.tpl (configure-[+module+], configure-gcc,
2024 configure-stage1-gcc, configure-stage2-gcc, configure-stage3-gcc):
2025 Set and export LDFLAGS.
2026 * Makefile.in: Regenerate.
2031 * Makefile.tpl: If we don't have built-in-tree target tools,
2032 use the ones found by configure rather than hacking around with
2033 program_transform_name.
2034 * configure.in: Give Makefile.tpl the information necessary
2036 * Makefile.in: Regenerate.
2037 * configure: Regenerate.
2042 * configure.in: When computing baseargs, strip *all* copies of
2043 offending options. Also, don't match/substitute the trailing space,
2044 so that this actually works when two similar options are separated by
2046 * configure: Regenerate.
2050 * configure.in (powerpc-*-aix*): Remove target-libada from noconfigdirs.
2051 (rs6000-*-aix*): Same.
2052 * configure: Regenerate.
2056 Remove MPW support, no longer used.
2057 * mpw-README, mpw-build.in, mpw-config.in, mpw-configure,
2058 mpw-install: Remove files.
2059 * src-release (DEVO_SUPPORT): Remove names of removed files.
2060 * MAINTAINERS: Likewise.
2064 * Makefile.tpl (top level bootstrap support): Remove now-unneeded
2065 STRICT_WARN, WARN_CFLAGS flags passed down to make.
2066 * Makefile.in: Regenerate.
2068 * configure.in (top level bootstrap support): Rework --enable-werror
2069 to set @stage2_werror_flag@.
2070 * configure: Regenerate.
2071 * Makefile.tpl (top level bootstrap support): Pass
2072 @stage2_werror_flag@ down to configure in stages 2 and 3.
2073 * Makefile.in: Regenerate.
2077 * Makefile.tpl (new-bootstrap): Set CC and CC_FOR_BUILD in configure
2078 for stages 2 and 3 as well as in make. As a consequence, remove
2079 OUTPUT_OPTION (now detected by configure) from the flags passed down
2081 * Makefile.in: Regenerate.
2083 * Makefile.tpl (new-bootstrap): Fix typo.
2084 * Makefile.in: Regenerate.
2088 * Makefile.tpl: Rearrange by moving recursive_targets rules
2089 into their proper sections.
2090 * Makefile.tpl (top level bootstrap support): Move disabling
2091 of coverage flags from 'make' to 'configure'; improve comments.
2092 * Makefile.in: Regenerate.
2094 * Makefile.tpl (experimental top level bootstrap) Move stage1
2095 language setting from all- target to configure- target; disable
2096 intermodule optimization in stage 1; prevent gratuitous rebuilds
2098 * Makefile.in: Regenerate.
2099 * configure.in: Comma-separate stage 1 language list for top
2101 * configure: Regenerate.
2103 * Makefile.tpl: Clean up experimental top level bootstrap support:
2104 note known problems; set CONFIG_SHELL; don't set BUILD_CC; relocate
2105 prev-gcc in configure- targets as well as all- targets.
2106 * Makefile.in: Regenerate.
2110 * configure.in: Remove symbolic link section.
2111 * configure: Regenerate.
2112 * Makefile.tpl (links): Remove.
2113 * Makefile.in: Regenerate.
2118 * configure.in (DEFAULT_YACC, DEFAULT_M4, DEFAULT_LEX):
2119 Set with AC_CHECK_PROGS.
2120 * configure.in: Fix comment typo from last patch.
2121 * configure: Regenerate.
2125 * Makefile.tpl: Introduce experimental top level bootstrap support.
2126 * Makefile.in: Regenerate.
2127 * configure.in: Introduce support for top level bootstrap.
2128 * configure: Regenerate.
2134 * configure.in: Cope with shells that do not support unquoted ^
2135 * configure: Regenerate.
2141 * configure.in: Cope with shell that do not support nesting
2142 quotes inside quoted backquote substitutions.
2143 * configure: Regenerate.
2148 * configure.in: Fix escaping of $.
2149 * configure: Regenerate.
2153 * configure: Regenerate.
2158 Move language detection to the top level.
2159 * configure.in: Find default values for the tools as
2160 soon as possible. Disable ada if GNAT is not found.
2161 Emit error message about missing languages. Expand
2162 --enable-languages=all for the gcc subdirectory.
2166 * configure.in (mips64*-*-linux*): Override mips*-*-linux* case
2168 * configure: Regenerated.
2173 * Makefile.tpl: Guard XFOO sed statements better.
2174 * Makefile.tpl: Add dependency for configure-target-libada.
2175 * Makefile.in: Regenerate (incidentally fixes broken
2176 commit when libada-branch was merged).
2180 * src-release (CVS_NAMES): Define.
2181 (do-tar, do-tar): Prune $(CVS_NAMES).
2185 * texinfo/texinfo.tex: Update from version 2003-02-03.16 to
2191 * mkinstalldirs, install-sh: Import from automake CVS HEAD.
2195 * config.guess: Update from version 2003-06-12 to 2004-02-16.
2196 * config.sub: Update from version 2003-06-13 to 2004-02-16.
2200 * configure.in (powerpc-*-aix*): Add target-libada to noconfigdirs.
2201 (rs6000-*-aix*): Same.
2202 * configure: Regenerate.
2206 * configure.in (host): Add in missing $noconfigdirs to defines.
2207 * configure: Regenerate.
2212 PR ada/6637, PR ada/5911
2213 Merge with libada-branch:
2214 * configure.in, Makefile.tpl, Makefile.def: Add target-libada,
2215 with appropriate dependencies. Add --enable-libada configure switch.
2216 * configure, Makefile.in: Regenerate.
2220 * configure.in: Don't pass --with-stabs on IRIX 5 either.
2221 * configure: Regenerate.
2225 * COPYING.NEWLIB: Update Red Hat license to 2004.
2229 * Makefile.def (target_modules) [libiberty]: Don't stage.
2230 * Makefile.in: Rebuilt.
2234 * COPYING.NEWLIB: Update to include copyrights for new
2239 * src-release: Update copyright year.
2240 (do-proto-toplev): Configure using i686-pc-linux-gnu.
2241 (NEWLIB_SUPPORT_DIRS): Delete macro.
2242 (newlib.tar.bz2): Delete rule.
2246 * Makefile.def (target_modules) [libtermcap, libiberty, zlib]: Stage.
2247 * Makefile.tpl (configure-target-[+module+]): Support stage.
2248 * Makefile.in: Rebuilt.
2252 * gettext.m4: Quote names of macros to be defined by AC_DEFUN
2257 * configure.in: Use ./config.cache, not config.cache.
2258 * configure: Regenerate.
2259 * Makefile.tpl: Special-casing not needed for GCC any more.
2260 * Makefile.in: Regenerate.
2262 * configure.in: Don't share a cache file for host dirs.
2263 * configure: Regenerate.
2265 * config-ml.in: Don't mess with the cache file.
2269 * Makefile.tpl: Make GCC use a separate config.cache.
2270 * Makefile.in: Regenerate.
2272 PR bootstrap/11932, PR bootstrap/11933
2273 (I don't know if it will fix either of them, but it relates
2275 * configure.in: Don't use shared config.cache for target
2277 * configure: Regenerate.
2281 * configure.in (ia64*-*-hpux*): Disable building java libraries.
2282 * configure: Regenerated.
2286 * configure.in (*-*-uclinux): Exclude newlib, libgloss and rda.
2287 * configure: Regenerated.
2291 Port change over from GCC:
2293 * Makefile.tpl (BASE_FLAGS_TO_PASS): Pass along CONFIG_SHELL.
2294 (configure-build-[+module+], configure-[+module+]): Likewise.
2295 (configure-target-[+module+], configure-gcc, config.status): Likewise.
2296 * Makefile.in: Regenerate.
2300 * configure.in (raw_libstdcxx_flags): Remove the leading space.
2301 * configure: Regenerate.
2305 * COPYING.NEWLIB: Add license info for long long routines added to
2310 * Makefile.tpl (EXTRA_GCC_FLAGS): Pass BOOT_ADAFLAGS.
2311 * Makefile.in: Regenerate.
2315 * configure.in (*-*-vxworks): Add target-libiberty to noconfdirs.
2316 * configure: Regenerate.
2320 * Makefile.tpl: Make GCC_FLAGS_TO_PASS a superset of
2322 * Makefile.in: Regenerate.
2326 * configure.in: Allow explicit specification of CFLAGS_FOR_BUILD.
2327 * configure: Rebuilt
2328 * Makefile.tpl: Use CFLAGS_FOR_BUILD computed by configure
2329 * Makefile.in: Rebuilt
2333 * ltconfig (sys_lib_search_path_spec): Fix a typo for HPUX.
2337 * config-ml.in: Use ac_configure_args directly instead of
2338 ml_arguments. Only set ml_norecursion if --no[-]recursion is
2343 * config-ml.in: Propagate INSTALL variables.
2347 * configure.in: Pass a computed --program-transform-name
2349 * configure: Regenerated.
2353 * Makefile.tpl: Don't pass down obsolete ENQUIRE variable.
2354 * Makefile.in: Regenerate.
2356 * Makefile.tpl: Don't pass (unused) DLLTOOL or WINDRES to gcc.
2357 * Makefile.in: Regenerate.
2361 * configure.in (TOPLEVEL_CONFIGURE_ARGUMENTS, baseargs): Fix
2363 * configure: Regenerated.
2368 * src-release (do-proto-topleve): Remove junk files
2369 intl/config.cache, intl/config.status,
2370 intl/config.h, intl/stamp-h.
2374 * src-release (dejagnu.tar): New target.
2375 (dejagnu.tar.bz2): Recursively call "gdb-taz" rule.
2376 (do-djunpack): Use $(PACKAGE) for the package name.
2380 * configure: Regenerate.
2384 * configure.in: Match GNU/KFreeBSD with new kfreebsd*-gnu triplet.
2388 * configure.in: Ensure arguments to sed are properly spaced.
2389 * configure: Regenerate.
2395 * install-sh: Update to newer upstream versions (associated with
2397 * missing: Likewise, plus $1Help2man -> $1 typo fix.
2401 * configure.in: Set RAW_CXX_FOR_TARGET if unset.
2402 * configure: Regenerated.
2406 * configure.in: Use newline instead of semicolon when assuming
2407 shell arguments in a for loop.
2408 * configure: Regenerated.
2413 * configure.in: When testing with_libs and with_headers, treat
2415 * configure: Regenerate.
2417 * configure.in (TOPLEVEL_CONFIGURE_ARGUMENTS): Quote properly for
2419 (baseargs): Likewise.
2420 * configure: Regenerate.
2424 * configure.in: Disable libgcj for darwin not on powerpc.
2425 * configure: Rebuild.
2429 * src-release (do-proto-toplev): Remove junk files
2430 dejagnu/example/calc/config.status,
2431 dejagnu/example/calc/config.log.
2435 * config-ml.in, symlink-tree: Add license.
2442 * Makefile.tpl (check, check-c++): Express dependencies using
2443 dependencies rather than commands.
2444 * Makefile.in: Regenerate.
2447 * Makefile.tpl (libsubdir): Use gcc instead of gcc-lib.
2448 * Makefile.in: Update.
2452 * configure.in (noconfigdirs): Do not add GDB when m32r-*-*.
2457 * configure.in: Enable libgcj for darwin.
2458 * configure: Rebuild.
2462 * mkinstalldirs: Import autoconf 2.57 / automake 1.7 version.
2466 * Makefile.tpl: Use 'mkinstalldirs' rather than 'mkdir' when
2467 creating target and build subdirs to build all parent dirs as needed.
2468 * Makefile.in: Rebuild.
2469 * configure.in: Don't build dirs explicitly here.
2470 * configure: Rebuild.
2474 * Makefile.tpl (all-make): Depend on intl.
2475 * Makefile.in: Rebuilt.
2479 * config.if: Remove unused libc_interface determination.
2483 * Makefile.in: Regenerate, correctly this time.
2487 * Makefile.tpl: Set INSTALL and friends using autoconf. Remove
2488 unused INSTALL_PROGRAM_ARGS.
2489 * configure.in: Use AC_PROG_INSTALL.
2490 * Makefile.in: Regenerate.
2491 * configure: Regenerate.
2495 * configure: Rebuilt.
2497 * configure.in (noconfigdirs) [am33_2.0-*-linux*]: Don't build
2498 newlib nor libgloss.
2500 * configure.in (am33_2.0-*-linux*): Added.
2504 * configure.in: Add ${libgcj} to noconfigdirs for xtensa-*-* targets.
2505 * configure: Regenerate.
2509 * config-ml.in: Replace PWD with PWD_COMMAND.
2510 * Makefile.tpl: Likewise.
2511 * Makefile.in: Regenerated.
2515 * configure.in: Clean up config-lang.in handling. Delete
2516 useless assignment to "subdirs".
2517 * configure: Regenerate.
2521 * configure.in: Rename 'target_libs' to 'target_libraries'.
2522 Remove useless reference to 'target_libs'.
2523 * configure: Regenerate.
2527 * Makefile.tpl: Add maybe-configure-itcl to configure-gdb.
2528 * Makefile.in: Regenerate.
2532 * Makefile.def: Introduce flags_to_pass.
2533 * Makefile.tpl: Generate BASE_FLAGS_TO_PASS using it.
2534 * Makefile.in: Regenerate.
2538 * configure.in (noconfigdirs) <cris-*-*>: Disable target-newlib
2539 and target-libgloss.
2540 <d30v-*-*, fr30-*-*, i960-*-*, m32r-*-*>: Disable gdb.
2541 <h8300*-*-*>: Disable libf2c and ${libgcj}.
2542 * configure: Regenerate.
2546 * configure.in: Update testsuite_flags to new location.
2547 * configure. Regenerate.
2551 * Makefile.tpl: Remove BUILD_CC stuff.
2552 * Makefile.in: Regenerate.
2556 * config.guess: Update to 2003-06-12 version.
2557 * config.sub: Update to 2003-06-13 version.
2561 * MAINTAINERS: Add myself as MIPS co-maintainer.
2565 * config.guess: Update to 2003-06-06 version.
2566 * config.sub: Update to 2003-06-06 version.
2570 * configure.in: Don't pass --with-stabs for mips*-sgi-irix6*o32.
2571 * configure. Regenerate.
2575 * configure.in: Disable serial configure by default.
2576 * configure: Regenerate.
2577 * Makefile.tpl: Abolish .NOTPARALLEL.
2578 * Makefile.in: Regenerate.
2580 * Makefile.tpl: Replace {build,host,target}_canonical by
2581 {build,host,target}.
2582 * Makefile.in: Regenerate.
2584 * Makefile.tpl: Fix stupid pasto.
2585 * Makefile.in: Regenerate.
2589 * Makefile.tpl: Remove bogus conditional.
2590 * Makefile.in: Regenerate.
2594 * Makefile.tpl: Make 'recursive targets' using autogen rather
2595 than shell loop. Remove duplicate 'clean' targets and false
2597 * Makefile.def: Add systematic dependencies to 'recursive' targets.
2598 Add systematic method of specifying missing targets in subdirs.
2599 Add copyright boilerplate.
2600 * Makefile.in: Regenerate.
2601 * configure.in: Add 'recursive targets' to maybe list.
2602 * configure: Regenerate.
2604 * Makefile.tpl: Rename [+target+] to [+make_target+].
2605 * Makefile.def: Rename 'target' to 'make_target'.
2609 * README-maintainer-mode: Update URL for locating blessed config
2614 * ltconfig: Import this patch and modify for use with current
2615 version of ltconfig:
2619 * libtool.m4 (AC_LIBTOOL_SYS_DYNAMIC_LINKER): Add support for
2624 * Makefile.tpl: Make maybe-check-gcc .PHONY.
2625 * Makefile.in: Regenerate.
2629 * COPYING.NEWLIB: Add license info for newlib/libc/sys/linux/stdlib.
2633 * Makefile.tpl (configure-target-libiberty): Depend only on gcc, not
2635 * Makefile.in: Regenerate.
2639 * Makefile.tpl: Add missing empty maybe-check-gcc target.
2640 * Makefile.in: Regenerate.
2644 * configure.in: Use curly braces in the definition of tooldir.
2645 * configure: Regenerate.
2649 * configure.in: Switch more things to use maybe dependencies.
2650 * Makefile.tpl: Switch more things to use maybe dependencies.
2651 Factor out common code from autogen IF statements.
2652 * configure: Regenerate.
2653 * Makefile.in: Regenerate.
2657 * configure.in: Accept i[3456789]86 for machine type.
2658 * configure: Regenerate.
2662 * configure.in: Switch more things to use maybe dependencies.
2663 Rearrange a little. Use GCC_TOPLEV_SUBDIRS.
2664 * configure: Regenerate.
2665 * Makefile.tpl: Switch more things to use maybe dependencies.
2666 * Makefile.in: Regenerate.
2670 * Makefile.tpl (install-opcodes): Define.
2671 * Makefile.in: Rebuild.
2675 * config.guess: Update to 2003-05-09 version.
2676 * config.sub: Update to 2003-05-09 version.
2680 * configure.in: Correct sed script so that options in quotes are not
2682 * configure: Rebuild.
2686 * configure.in (FLAGS_FOR_TARGET): Remove $$s/newlib/libc/sys/cygwin
2687 and $$s/newlib/libc/sys/cygwin32 include paths.
2692 * config-ml.in: Restored from gcc repository.
2696 * Makefile.tpl: Require "makeinfo" from texinfo 4.2 or later.
2697 * Makefile.in: Regenerate.
2701 * src-release (DEVO_SUPPORT): Add src-release, Makefile.tpl,
2706 * Makefile.tpl: Clean $(BUILD_SUBDIR).
2707 * Makefile.in: Regenerated.
2711 * Makefile.tpl (MAKEINFOFLAGS): Default to --split-size=5000000.
2712 * Makefile.in: Regenerate.
2716 * configure.in (powerpc64*-*-linux*): Remove.
2717 * configure: Rebuilt.
2721 * Makefile.tpl (GCC_STRAP_TARGETS): New variable containing all the
2722 previous bootstrap targets, plus bubblestrap, quickstrap, cleanstrap,
2724 * Makefile.in: Regenerate.
2728 * configure.in (arm-*-netbsdelf*): Enable building java libraries.
2729 * configure: Regenerated.
2733 * libtool.m4 (lt_cv_deplibs_check_method): Use pass_all on mips*.
2734 * */configure: Rebuilt.
2738 * Makefile.tpl: Move .NOEXPORT, MAKEOVERRIDES back down.
2739 * Makefile.in: Regenerate.
2743 * Makefile.in: Regenerate with correct Makefile.def.
2747 * Makefile.tpl: Move .NOEXPORT, MAKEOVERRIDES up. Delete unused
2749 * Makefile.in: Regenerate.
2750 * configure.in: Clean up gxx_include_dir logic.
2751 * configure: Regenerate.
2755 * configure.in (gxx_include_dir): Fix typo.
2756 * configure: Regenerated.
2760 * texinfo/texinfo.tex: Import version 2003-02-03.16.
2764 * configure.in: Include $(build_tooldir)/sys-include in
2766 * configure: Regenerated.
2770 * Makefile.tpl: Reindent.
2771 * Makefile.in: Regenerate.
2772 * configure.in: Reindent. Don't set unused variables.
2773 * configure: Regenerate.
2775 * Makefile.tpl: Always pass down RANLIB.
2776 * Makefile.in: Regenerate.
2778 * Makefile.tpl: Don't set unused enable_shared, enable_threads macros.
2779 * Makefile.in: Regenerate.
2780 * configure.in: Remove unused logic relating to --enable-shared
2781 and --enable-threads. Remove bogus comments. Remove redundant
2783 * configure: Regenerate.
2785 * configure.in: Replace ${libstdcxx_version} by its value.
2786 Remove reference to mh-dgux.
2787 * configure: Regenerate.
2791 * Makefile.tpl: Rearrange.
2792 * Makefile.in: Regenerate.
2796 * configure: Remove site-file supprot - it is obsolete.
2800 * configure.in: Add support for kaOS as cross build target system.
2801 * configure: Regenerated.
2805 * Makefile.tpl: Add definition of CPPFLAGS to pass into
2806 configure-target-* as some target builds may require additional
2807 flags for preprocessor tests.
2808 * Makefile.in: Regenerated.
2812 * libtool.m4 (LD): Append -melf* option to LD on IRIX with GNU ld.
2813 * ltconfig: Handle it.
2814 * ltcf-cxx.sh: Use with_gnu_ld passed as a shell variable instead of
2819 * ltcf-cxx.sh: Replace $linker_flags with $compiler_flags wherever
2820 it is used as argument to $CC.
2821 * ltcf-gcj.sh: Likewise.
2825 * configure.in: Introduce --enable-maintainer-mode.
2826 * configure: Rebuilt.
2827 * Makefile.tpl (Makefile.in, configure): Enable dependencies only
2828 for maintainer mode.
2829 * Makefile.in: Rebuilt.
2833 * configure: Regenerate using autoconf 2.13.
2837 * config.guess: Import latest version.
2838 * config.sub: Import latest version.
2842 * Makefile.tpl (check-c++): Allow parallelism.
2846 * configure: Regenerate using autoconf 000227.
2850 * configure.in (*-*-darwin*): Rename from powerpc*-*-darwin*,
2851 don't configure target-libobjc.
2852 * configure: Regenerate.
2856 * Makefile.tpl (RANLIB): Define.
2857 * Makefile.in: Regenerate.
2861 * Makefile.def: Remove "snavigator", "grep", and "db" modules.
2862 * Makefile.tpl: Remove "all-snavigator" and "all-grep".
2863 * Makefile.in: Regenerated.
2864 * configure.in: Remove all traces of snavigator, db, and grep.
2865 * configure: Regenerated.
2869 * Makefile.tpl (all-sid): Add libiberty/bfd/opcodes dependencies.
2870 * Makefile.in: Regenerated.
2874 * config.if: Copy from GCC.
2878 * configure.in: Revert 24Jan change.
2879 * configure: Regenerate.
2883 * configure.in: Revert previous change.
2884 * configure: Regenerate.
2888 * configure.in: Make rda native-only.
2889 * configure: Regenerate.
2893 * configure.in: Add missing \.
2894 * configure: Rebuilt.
2898 * configure.in (baseargs): Avoid using \| in sed regular
2900 * configure: Rebuilt.
2904 * configure.in (baseargs): Remove all supported forms of
2905 --cache-file, --srcdir, --host, --build and --target options
2906 from argument lists.
2907 * configure: Rebuilt.
2911 * configure.in (noconfigdirs): Don't skip gas on IRIX 6.
2912 * configure: Rebuilt.
2916 * configure.in: Substitute TOPLEVEL_CONFIGURE_ARGUMENTS.
2917 * Makefile.tpl: Pass TOPLEVEL_CONFIGURE_ARGUMENTS to gcc.
2918 * Makefile.in: Regenerate.
2919 * configure: Regenerate.
2923 * Makefile.tpl (BASE_FLAGS_TO_PASS): Also pass DESTDIR.
2924 (install-info, dir.info): Prepend $(DESTDIR) to $(infodir).
2925 * Makefile.in: Regenerate.
2929 * configure.in: Remove Makefile in build, host and target modules
2930 unless configure was run with --no-recursion.
2931 * configure: Rebuilt.
2935 * config.guess: Update to 2003-01-03 version.
2936 * config.sub: Update to 2003-01-03 version.
2940 * configure: Regenerate with proper autoconf 2.13.
2944 * configure.in: Add AC_PREREQ for consistency.
2945 * configure: Regenerate.
2949 * configure.in (GDB_TK): Add tcl directories conditional on
2950 gdb/gdbtk directory being present.
2951 * configure: Regenerate.
2955 * configure.in (LD): Improve test for gcc. Try to set LD to the ld used
2956 by gcc if LD is not defined and we are not doing a Canadian Cross.
2957 * configure: Rebuilt.
2961 * src-release (ETC_SUPPORT): Add fdl.texi and texi2pod.pl.
2965 * Makefile.in: Rebuilt.
2966 * Makefile.def (target_modules) [libffi]: Allow installation.
2970 * configure.in: Fix use of $program_transform_name.
2971 * configure: Regenerated.
2975 * configure.in (baseargs): Don't remove first configure argument.
2976 * configure: Regenerated.
2980 * Makefile.tpl (local-distclean): Don't remove...
2981 (multilib.ts): ... this. Moved into...
2982 (multilib.out): ... this. Don't use sub-make.
2983 ($(BUILD_SUBDIR)/[+module+]/Makefile, [+module+]/Makefile,
2984 $(TARGET_SUBDIR)/[+module+]/Makefile, gcc/Makefile): Moved into...
2985 (configure-build-[+module+], configure-[+module+],
2986 configure-target-[+module+], configure-gcc): ... these. Test
2987 for Makefile existence. Drop config.status from dependencies.
2988 * Makefile.in: Rebuilt.
2989 * configure.in: Move gcc-version-trigger to the end of
2990 ac_configure_args. Add comments to maybedep.tmp and
2991 serdep.tmp. Introduce --disable-serial-configure. Remove
2992 nonopt from baseargs, matching and removing corresponding
2993 whitespace while at it.
2994 * configure: Rebuilt.
2998 * configure.in (host_configargs): Replace reference to
2999 no-longer-defined buildopts with --build=${build_alias}.
3000 * configure: Rebuilt.
3004 * Makefile.tpl ($(NOTPARALLEL)): Move to the end. Bring uses of
3005 program_transform_name to standard idiom.
3006 (AUTOGEN, AUTOCONF): Define.
3007 (Makefile.in): Use $(AUTOGEN).
3008 (Makefile): Depend on config.status, and use autoconf-style rule to
3009 build it. Move original commands to...
3010 (config.status): ... this new target.
3011 (configure): Add $(srcdir). Depend on config/acx.m4. Use
3013 * Makefile.in: Rebuilt.
3017 * Makefile.tpl: Fix dramatic bustage due to change in
3018 program_transform_name.
3019 * Makefile.in: Regenerate.
3021 * configure.in: Remove unnecessary PATH setting.
3022 * configure: Regnerate.
3024 * configure.in: Don't default to unprefixed tools unless
3025 the native tools will work.
3026 * configure: Regenerate.
3028 * configure.in: Convert to autoconf script. Blow away lots
3029 of now-redundant Makefile fragments.
3030 * configure: Generate using Autoconf.
3031 * Makefile.tpl: Rewrite to reflect autoconfiscation.
3032 * Makefile.in: Regenerate.
3036 * configure: Remove unneeded 'export's. Make CC_FOR_TARGET,
3037 CXX_FOR_TARGET, GCJ_FOR_TARGET substituted in configure.in only.
3039 * ChangeLog: Move a couple of entries from here to winsup/cygwin,
3044 * Makefile.tpl (multilib.out): Fix missing space.
3045 * Makefile.in: Regenerate.
3049 * Makefile.tpl: Use shared multilib.out. Use move-if-change for it.
3050 Convert (cd foo; make) to (cd foo && make). Clean up multilib.out.
3051 * Makefile.in: Regenerate.
3052 * configure.in: Remove unnecessary leftovers.
3056 * configure.in (extra_ranlibflags_for_target): New variable.
3057 (*-*-darwin): Add -c to ranlib commands.
3058 * configure (tooldir): Handle extra_ranlibflags_for_target.
3062 * COPYING.NEWLIB: Updated.
3063 * COPYING.LIBGLOSS: Ditto.
3067 * Makefile.tpl: Revert HJL's change.
3068 * Makefile.in: Regenerated.
3069 * configure.in: Put build_prefix before $(BUILD_SUBDIR) here, and
3074 * Makefile.tpl, configure.in: Substitute libstdcxx_incdir.
3075 * Makefile.in: Regenerate.
3079 * Makefile.tpl: Add @build_prefix@ before $(BUILD_SUBDIR).
3080 * Makefile.in: Regenerated.
3082 * configure.in (build_prefix): New. Substitute.
3086 * Makefile.tpl: Don't let real targets depend on phony targets.
3087 * Makefile.in: Regenerate.
3089 * Makefile.tpl (do-info): Depend on maybe-all-texinfo, not all-texinfo.
3090 * Makefile.in: Regenerate.
3094 * Makefile.tpl (all-gcc): Use 'make quickstrap' if there was a
3095 previous 'make bootstrap'.
3096 * Makefile.in: Regenerate.
3100 * configure.in (noconfigdirs) [mmix-*-*]: Disable libgloss and gdb.
3104 * Makefile.tpl (check-gcc-c++): Renamed from check-c++. Don't run
3106 (check-c++): Just depend on it and check-target-libstdc++-v3.
3107 * Makefile.in: Regenerate.
3111 * configure.in, Makefile.tpl, Makefile.def: Remove tclX.
3112 * Makefile.in: Regenerate.
3116 * COPYING.NEWLIB: Update list of alternate Regent of California
3117 licenses and discuss official revoking of advertising clause.
3118 * COPYING.LIBGLOSS: Ditto.
3122 * Makefile.tpl (configure-target-rda): Depend on $(ALL_GCC_C).
3123 * Makefile.in: Rebuilt.
3127 * configure: Fix bug put in by gremlins.
3129 * Makefile.tpl: Substitute more autoconfily.
3130 * configure: Substitute more autoconfily.
3131 * Makefile.in: Regenerate.
3135 * Makefile.tpl (all-sim): Depend on maybe-configure-gdb.
3136 * Makefile.in (all-sim): Ditto.
3140 * Makefile.tpl: Change configure dependencies to not have real
3141 targets depend on phony targets.
3145 * configure.in: Revert unintentional change.
3147 * src-release: Configure host subdirs.
3149 * Makefile.tpl: Change dependency for */multilib.out so that
3150 it works when gcc isn't in the tree.
3152 * configure.in: Substitute more.
3153 * configure: Run subconfigures from the Makefile.
3154 * Makefile.tpl: Run subconfigures from the Makefile; add a few
3155 convenience targets. Make sure gcc isn't rebuilt after bootstrap.
3159 * Makefile.tpl: Add targets for configuring host subdirs in Makefile,
3160 and corresponding dependencies.
3161 * Makefile.in: Regenerate.
3163 * configure.in (host_tools): Order binutils, gas and ld for
3164 convenience in running the testsuites.
3166 * Makefile.tpl: Introduce rules to serialize subconfigure runs.
3167 * Makefile.in: Regenerate.
3168 * configure.in: Introduce rules to serialize subconfigure runs.
3170 * configure.in: Introduce BASE_CC_FOR_TARGET.
3171 * Makefile.tpl: Reorganize and comment. Introduce HOST_CONFIGARGS.
3172 Realize configure-build-* targets. Realize configure-target-* targets.
3173 * Makefile.in: Regenerate.
3177 * configure: Move gcc_version_trigger stuff from here...
3178 * configure.in: ...to here.
3180 * configure.in: Separate subconfigure options added by this file from
3181 options given by the user. Add machinery to put args for host
3182 subconfigures into the Makefile.
3184 * Makefile.tpl: Remove 'vault' targets.
3185 * Makefile.tpl: Reorder and comment dependencies.
3186 * Makefile.in: Regenerate.
3190 * configure.in: Move host-specific darwin noconfigdirs into
3191 the host-specific section.
3195 * Makefile.tpl: Restore bkorb's style patch, accidentally lost
3197 * Makefile.in: Regenerate.
3199 (finishing slow-motion replay)
3200 * configure: Remove skip-this-dir support.
3201 * Makefile.tpl: Remove skip-this-dir support.
3203 * Makefile.tpl: Remove leftover support for non-autoconfiscated
3205 * Makefile.in: Regenerate.
3207 * Makefile.tpl: Strip out useless setting of 'dir'.
3208 * Makefile.in: Regenerate.
3212 (finishing slow-motion replay)
3213 * configure.in: Fix deeply stupid bug.
3215 * configure.in: Introduce RAW_CXX_FOR_TARGET and simplify embedded
3216 shell code in CXX_FOR_TARGET
3217 * Makefile.def: Introduce raw_cxx.
3218 * Makefile.tpl: Use raw_cxx to select between CXX_FOR_TARGET and
3220 * Makefile.in: Regenerate.
3224 (finishing slow-motion replay)
3225 * Makefile.tpl: Remove unnecessary ifs.
3226 * Makefile.in: Regenerate.
3228 * Makefile.tpl: Implement soft dependency machinery. Maybe-ize
3229 dependencies. Maybe-ize build-libiberty. Create dummy install
3230 targets for 'no_install' modules.
3231 * configure: Move GDB_TK substitution to configure.in. Move
3232 build_modules stuff to configure.in.
3233 * configure.in: Implement soft dependency machinery. Maybe-ize
3234 GDB_TK, rearrange slightly. Move build_modules stuff from configure.
3235 * Makefile.in: Regenerate.
3239 (continuing slow-motion replay)
3240 * Makefile.tpl: Make all-target, install-target behave similarly
3241 to all, install (only hitting configured targets). Eliminate
3242 unused macro defintions.
3244 * Makefile.tpl: Add all-gcc: all-build-libiberty dependency when
3247 * Makefile.tpl: Add all-gcc: all-libiberty dependency.
3249 * ltcf-c.sh, ltcf-gcj.sh, Makefile.tpl: Correct BUILD/HOST confusion.
3251 * configure.in: Produce lists of subdir targets we're actually
3252 configuring. Remove references to "dosrel".
3253 * Makefile.tpl: Let configure set which subdir targets are hit.
3254 Remove install-cross; clean up install; remove ALL. Remove
3255 references to "dosrel". Remove "EXTRA_TARGET_HOST" hackery.
3256 Autogenerate host module targets. Remove empty dependency lines
3257 and redundant dependency; rearrange slightly.
3258 * Makefile.def: Add host-side libtermcap, utils.
3260 * Makefile.in: Regenerate.
3264 (Continuing slow-motion replay)
3265 * Makefile.def: Add list of recursive targets to autogenerate.
3267 * Makefile.tpl: Autogenerate do-* targets. Autogenerate *-target-*
3268 targets. Autogenerate *-build-* targets.
3269 * Makefile.in: Regenerate.
3273 (Continuing slow-motion replay)
3274 * configure: More autoconf-style substitutions.
3275 * Makefile.tpl: More autoconf-style substitutions.
3276 * Makefile.in: Regenerate.
3280 (Continuing slow-motion replay)
3281 * configure: Substitute more variables in a more autoconf-friendly
3282 way. Simplify slightly.
3283 * Makefile.tpl: Make more variables substitutable in an
3284 autoconf-friendly way.
3285 * Makefile.in: Regenerate.
3289 (Continuing slow-motion replay)
3290 * configure.in (v810*): Remove special setting of tools.
3292 * configure: Add support for extra required flags for ar or nm.
3293 * configure.in (aix4.3+): Use above support for target-specific
3294 issues, rather than using config/mt-aix43.
3298 (Starting slow-motion replay merge from gcc 3.4 b-i-b branch)
3299 * configure: Remove 'removing', which doesn't work. Replace $subdir
3300 with . everywhere. Replace $subdirs with ''. Replace $makesrcdir
3301 with $srcdir. Reformat indentation. Substitute some variables
3302 formerly hard-coded in the Makefile for build=host.
3303 * Makefile.tpl: Autogenerate more; make more autoconf-friendly.
3304 * Makefile.def: Autogenerate more.
3305 * Makefile.in: Regenerate.
3309 * Makefile.tpl: syntactic cleanup
3313 * Makefile.def (host_modules): Add rda.
3314 * Makefile.in: Regenerate.
3315 * configure.in (target_tool): Add target-rda to list.
3319 * Makefile.tpl (bootstrap): Add bubblestrap, quickstrap, cleanstrap,
3320 and restrap targets to this rule.
3321 * Makefile.in: Regenerate.
3325 * configure.in (i[3456]86-*-linux*): Add check to disable
3326 ${libgcj} for glibc1.
3330 * configure.in: Add tic4x target.
3334 * Makefile.tpl: Make SET_LIB_PATH substitution more autoconfy.
3335 * Makefile.tpl: Make RPATH_ENVVAR substitution more autoconfy.
3336 * configure.in: Make SET_LIB_PATH substitution more autoconfy.
3337 * configure.in: Make RPATH_ENVVAR substitution more autoconfy.
3338 * Makefile.in: Regenerate.
3342 * Makefile.tpl: Eliminate reference to all-gui, all-libproc.
3343 * Makefile.in: Regenerate.
3345 * Makefile.def: Remove order dependency comments.
3346 * Makefile.tpl: Add explicit install-install dependencies.
3347 * Makefile.in: Regenerate.
3349 * Makefile.tpl: Remove material now in src-release. (Finally!)
3350 * Makefile.in: Regenerate.
3352 * configure: Restore my original patch by syncing with gcc version.
3354 * Bring following over from gcc:
3358 * configure.in (s390*-*-linux*): Enable libgcj.
3362 * Makefile.in: Regenerate. This really ought to fix things. :sigh:
3366 * configure: Move stray lines back to where they belong.
3370 * Makefile.tpl: Insert configure-target target, for src-release.
3372 * configure: Finish reverting change which Andrew Cagney started
3373 reverting. Should fix bustage.
3375 * src-release (BINUTILS_SUPPORT_DIRS): Add cpu directory.
3376 * src-release: New file. Contains material for making net
3377 releases for gdb, binutils, et al., formerly in Makefile.in.
3381 * cpu: New top level directory. Intended to hold input files for
3382 CGEN which have FSF copyright assignment.
3383 * Makefile.in (BINUTILS_SUPPORT_DIRS): Add cpu directory.
3387 Revert below (note that src does not contain Makefile.tpl):
3388 * Makefile.tpl: Make subsituted variables more autoconfy.
3389 * Makefile.in: Regenerate.
3393 * configure: Revert accidentally applied changes.
3395 * Makefile.tpl: Make more autoconf-friendly.
3396 * Makefile.in: Regenerate.
3397 * configure: Make substitution more autoconf-like.
3401 * configure.in (arm-*-coff, strongarm-*-coff, xscale-*-coff): Use a
3402 single entry to handle all these.
3403 (arm-*-elf, strongarm-*-elf, xscale-*-elf): Likewise. Also enable
3404 libjava on arm-*-elf.
3408 * configure.in (powerpc-*-darwin*): Don't configure BFD, TK, or the
3409 things that depend on them.
3413 * Makefile.tpl: Make subsituted variables more autoconfy.
3414 * Makefile.in: Regenerate.
3415 * configure: Make seds more autoconfy.
3419 * Makefile.tpl: Rewrite substituted lines to look autoconfy.
3420 * Makefile.in: Regenerate.
3421 * configure.in: Rewrite sed statements to look autoconfy.
3423 * Makefile.tpl: Autogenerate *-target-* lists, dependencies of
3424 all-target-foo on configure-target-foo.
3425 * Makefile.def: Ditto.
3426 * Makefile.in: Rebuild.
3430 * Makefile.def: New file.
3431 * Makefile.tpl: New file.
3432 * Makefile.in: Generate from Makefile.tpl with 'autogen Makefile.def'.
3434 * configure.in: Minor rearrangement. Simplify tests.
3438 * configure.in (with_headers): Skip copy if value is "yes".
3439 (with_libs): Likewise.
3443 * configure.in (*-*-netbsd*): Use noconfigdirs, not skipdirs.
3444 * configure.in (sh*-*-pe*): Ditto.
3445 * configure.in (mips*-*-pe*): Ditto.
3446 * configure.in (*arm-wince-pe): Ditto.
3448 * configure.in: Rearrange.
3452 * Import these changes from the config master repository:
3456 * config.sub: Add tic4x target.
3460 * config.guess: Detect NSR-D machines for nsr-tandem-nsk.
3465 * COPYING.NEWLIB: More updates.
3469 * COPYING.NEWLIB: Update.
3473 * texinfo/texinfo.tex: Import version 2002-06-04.06.
3475 * config.guess: Import version 2002-08-23.
3476 * config.sub: Import version 2002-08-22.
3480 * Makefile.in (GCC_FOR_TARGET): Prepend STAGE_CC_WRAPPER.
3481 * configure.in (CC_FOR_TARGET, GCJ_FOR_TARGET, CXX_FOR_TARGET,
3482 CXX_FOR_TARGET_FOR_RECURSIVE_MAKE): Likewise.
3486 * configure.in (hppa*-*-openbsd*): Treat like hppa*-*-*elf*.
3490 * configure.in (mips*-*-linux*): Don't skip target-libffi.
3494 * configure.in: Move generic linux case to end. Copy generic
3495 linux noconfigdirs to mips*-*-linux* entry and new
3496 powerpc64*-*-linux* entry. Add target-libffi for the latter.
3500 * MAINTAINERS: Clarify on config.guess and config.sub, and add
3501 one instance of them which was missed to the list to update.
3505 * config.guess: Update to 2002-07-09 version.
3506 * config.sub: Update to 2002-07-03 version.
3510 * configure.in: Remove two redundant tests.
3514 * configure.in (mips*-*-irix6*o32): Enable stabs.
3518 * configure.in: Don't build grez.
3519 * Makefile.in: Ditto.
3521 * Makefile.in: Remove references to bsp, cygmon, libstub.
3522 * configure.in: Ditto.
3524 * configure.in: Remove leftover reference to gdbtest.
3528 * configure.in (gxx_include_dir): Change to match versioned
3529 C++ headers if --enable-version-specific-runtime-libs is used.
3533 * ltcf-cxx.sh (hpux*): Modify to support ia64-*-hpux*.
3537 * configure.in: Make --without-x work.
3541 * contrib: New directory. Created to contain a copy of the
3542 texi2pod.pl script so that it is in the same place as the version in
3543 the FSF GCC sources.
3547 * configure.in: Rearrange target Makefile fragment collection.
3549 * Makefile.in: Don't try to build gdbtest, tgas, ispell, inet, or
3551 * configure.in: Ditto.
3555 * Makefile.in: Eliminate 'apache' targets.
3556 * configure.in: Eliminate 'apache' targets.
3558 * configure.in: Eliminate redundant tests. Reorganize.
3560 * Makefile.in: Eliminate last reference to LIBGCC1_TEST.
3562 * config-ml.in: Eliminate references to Cygnus configure.
3564 * Makefile.in: Eliminate references to building emacs.
3568 * configure.in: Add support for ip2k.
3572 * configure.in (host_tools): Remove cgen.
3574 * Makefile.in (all-cgen): Remove; runs from its source directory.
3575 (check-cgen, install-cgen, clean-cgen): Likewise.
3576 (all-opcodes): No not depend on all-cgen.
3577 (all-sim): Likewise.
3581 * configure.in: Fix AIX configury bug.
3585 * configure.in: Replace ${topsrcdir} with ${srcdir}.
3587 * configure.in: Move definition of libstdcxx_flags right above
3588 usage, rather than way earlier.
3590 * configure.in: Pull definition of is_cross_compiler earlier.
3592 * configure.in: Rearrange a little.
3594 * configure.in: Remove references to librx.
3595 * Makefile.in: Remove references to librx.
3599 * configure.in: Eliminate ${gasdir} variable.
3603 * configure.in: Add support for frv.
3604 * config.sub: Add support for frv.
3608 * Makefile.in (CFLAGS_FOR_TARGET): Add -O2.
3612 * configure.in (vax-*-netbsd*): Re-enable gas.
3616 * Makefile.in: Replace HOST_PREFIX, HOST_PREFIX_1 with BUILD_PREFIX,
3617 BUILD_PREFIX_1, to correct nomenclature.
3618 * configure: Likewise.
3620 * Makefile.in: Eliminate version-specific references to tcl8.1, tk8.1.
3621 * configure.in: Eliminate version-specific references to tcl8.1, tk8.1.
3625 * config-ml.in: Propogate DESTDIR also.
3629 * configure.in (vax-*-netbsd*): Don't build gas for this
3634 * configure.in (noconfigdirs): Don't compile libiberty, libstdcxx
3639 * config.sub: Add DLX target.
3643 * config.guess: Update to 2002-05-22 version.
3644 * config.sub: Likewise.
3648 * Makefile.in: Allow for PWDCMD to override hardcoded pwd.
3649 * config-ml.in: Likewise.
3650 * configure: Likewise.
3651 * configure.in: Likewise.
3655 * configure.in: Simplify makefile fragment collection.
3657 * configure.in: Remove code to build emacs.
3659 * configure.in : Remove --srcdir argument from targargs and buildargs
3660 (it's always overridden in the Makefile anyway). Rearrange a bit.
3662 * configure: Move some logic to configure.in.
3663 * configure.in: Move some logic from configure.
3667 * COPYING.LIBGLOSS: New file.
3671 * Makefile.in: Honour DESTDIR.
3675 * configure.in (noconfigdirs): Don't disable libgcj on
3676 sparc64-*-solaris* and sparcv9-*-solaris*.
3680 * configure.in: Revert 2002-04-18's patch; fixed in libjava.
3684 * configure.in (FLAGS_FOR_TARGET): Do not add
3685 -B$$r/$(TARGET_SUBDIR)/newlib/ when compiling newlib natively
3686 on i[3456]86-*-linux*.
3690 * configure.in (noconfigdirs): Replace [ ] with test.
3692 * configure.in (noconfigdirs): Do not add target-newlib if
3693 target == i[3456]86-*-linux*, and host == target.
3697 * config.guess: Updated to 2002-04-26's version.
3698 * config.sub: Updated to 2002-04-26's version.
3702 * configure.in: delete reference to absent file
3704 * configure.in: replace '[' with 'test'
3706 * configure.in: Eliminate references to gash.
3707 * Makefile.in: Eliminate references to gash.
3709 * configure.in: remove useless references to 'pic' makefile fragments.
3711 * configure.in: (*-*-windows*) Finish removing.
3713 * configure.in: Eliminate redundant test for libgui.
3717 * configure.in (h8300*-*-rtems*): Disable libf2c and libgcj.
3718 (sparc-*-elf*, sparc64-*-elf*): Disable libgcj.
3722 * configure.in: remove references to dead files
3726 * configure.in: Disallow configuring libgcj when it is already
3727 installed and we're using Solaris 2.8 linker. Do enable libgcj on
3728 Solaris 2.8 by default. For PR libgcj/6158.
3732 * configure.in: Move default CC setting out of config/mh-* fragments
3737 * configure.in: don't even try to configure or make a subdirectory
3738 if there's no configure script for it.
3742 * MAINTAINERS: Remove chill maintainers.
3743 * Makefile.in (CHILLFLAGS): Remove.
3744 (CHILL_LIB): Remove.
3745 (TARGET_CONFIGDIRS): Remove libchill.
3746 (CHILL_FOR_TARGET): Remove.
3747 (BASE_FLAGS_TO_PASS): Don't pass CHILLFLAGS, CHILL_FOR_TARGET, or
3749 (CONFIGURE_TARGET_MODULES): Remove configure-target-libchill.
3750 (CHECK_TARGET_MODULES): Likewise.
3751 (INSTALL_TARGET_MODULES): Likewise.
3752 (CLEAN_TARGET_MODULES): Likewise.
3753 (configure-target-libchill): Remove.
3754 (all-target-libchill): Remove.
3755 * configure.in (target_libs): Remove target-libchill.
3756 Do not compute CHILL_FOR_TARGET.
3757 * libchill: Remove directory.
3761 * Makefile.in, configure.in, configure: Sync with gcc, entries
3766 * configure.in: Add FLAGS_FOR_TARGET to GCJ_FOR_TARGET.
3767 Fixes PR libgcj/6068.
3771 * configure.in (i*86-*-netbsdelf*): Don't disable libgcj.
3775 * configure.in (alpha*-dec-osf*): Enable libgcj.
3779 Fix for: PR bootstrap/3591, target/5676
3780 * configure.in (mcore-pe): Disable the configuration of
3781 libstdc++-v3 since exceptions are not supported.
3785 * configure.in: Enable libgcj for xscale-elf target.
3789 * configure.in (libstdcxx_flags): Don't add libstdc++-v3 flags for
3791 (CXX_FOR_TARGET): Explain why -shared-libgcc here.
3795 * configure.in (CXX_FOR_TARGET): Add -shared-libgcc for
3796 libstdc++-v3 and libjava.
3800 * gcc/Makefile.in: Removed libstdc++-v3 dependancy for libjava and
3805 * config.guess: Updated to 2002-01-30's version.
3806 * config.sub: Updated to 2002-02-01's version.
3807 Contribute sh64-elf.
3809 * configure.in: Added sh64-*-*.
3813 * Makefile.in (all-fastjar): Also depend on all-libiberty.
3814 (all-target-fastjar): Also depend on all-target-libiberty.
3818 * configure, configure.in: Use temp file for long sed commands.
3822 * configure.in (noconfigdirs) [h8300*-*-*, h8500-*-*]: Disable
3827 * configure.in (noconfigdirs) [mmix-*-*]: Disable libgcj.
3831 * configure.in (noconfigdirs) [cris-*-*]: Disable libgcj.
3835 * configure: Handle temporary files securely using mkdir.
3839 * configure.in (*-*-linux*): Disable configuration of target-newlib
3840 and target-libgloss.
3844 * Makefile.in (EXTRA_TARGET_FLAGS): Pass RANLIB_FOR_TARGET for
3849 * Makefile.in (check-c++): Add missing semicolon.
3853 * configure.in (sh-*-linux*): New.
3857 * configure.in (noconfigdirs): Don't compile libiberty, libstdcxx
3858 and libgcj on m68hc11/m68hc12.
3862 * Makefile (CFLAGS_FOR_BUILD): New.
3863 (EXTRA_GCC_FLAGS): Add CFLAGS_FOR_BUILD.
3867 * configure.in (libstdcxx_flags): Do not try to execute
3868 libstdc++-v3/testsuite_flags until it exists.
3872 * configure.in (libstdcxx_flags): Remove reference to libstdc++.INC.
3876 * ltcf-cxx.sh: Add -nostdlib to IRIX 6 archive_cmds.
3880 * configure.in: Move *-chorusos target case to the proper switch.
3885 * Makefile.in (STAGE1_CFLAGS): Pass down.
3889 * config.guess: Add hppa64-linux support. Note for next import that
3890 this is already in the master file.
3891 * configure.in: Likewise. Accept `parisc' alias for `hppa'.
3895 * Makefile.in (DO_X): Do not backslash single-quotes in
3896 backquotes (two places).
3900 * Makefile.in (DO_X): Quote nested quotes.
3904 * Makefile.in (DO_X): Use double quotes for quoting
3905 "RANLIB=$${RANLIB}".
3909 * configure.in: Only use `lang_requires' for languages athat are
3914 * configure.in: Allow config-lang.in to set `lang_requires' to list
3915 of other required languages.
3919 * Makefile.in: Remove RANLIB definition. Use RANLIB
3920 in RANLIB_FOR_TARGET, EXTRA_HOST_FLAGS, EXTRA_TARGET_FLAGS,
3921 EXTRA_GCC_FLAGS, $(DO_X) targets only when the RANLIB is set.
3926 * Makefile.in (check-c++): Use tabs, not spaces.
3930 * Makefile.in (check-c++): New rule.
3932 * configure.in (target_libs): Remove libg++.
3933 (noconfigdirs): Remove libg++.
3934 (noconfigdirs): Same.
3935 (noconfigdirs): Same.
3936 (noconfigdirs): Same.
3938 * config-ml.in: Remove libg++ references.
3940 * Makefile.in (TARGET_CONFIGDIRS): Remove libio, libstdc++, libg++.
3941 (ALL_TARGET_MODULES): Same.
3942 (configure-target-libg++): Remove.
3943 (all-target-libg++): Remove.
3944 (configure-target-libio): Remove.
3945 (all-target-libio): Remove.
3946 (check-target-libio): Remove.
3948 (libg++.tar.bz2): Remove.
3949 (all-target-cygmon): Remove libio.
3950 (all-target-libstdc++): Remove.
3951 (configure-target-libstdc++): Remove.
3952 (TARGET_LIB_PATH): Remove libstdc++.
3953 (ALL_GCC_CXX): Remove libstdc++.
3954 (all-target-gperf): Correct.
3958 * configure: Introduce GCJ_FOR_TARGET.
3959 * configure.in: Ditto.
3960 * Makefile.in: Ditto.
3964 * configure.in: for *-chorusos, don't config target-newlib and
3969 Remove V2 C++ library.
3970 * configure.in: Remove --enable-libstdcxx_v3 support.
3974 * configure.in (target_makefile_frag) [alpha*-*]: Use mt-alphaieee.
3978 * configure.in: Allow libgcj to be built on Sparc Solaris.
3982 * configure.in: Enable libgcj on several additional platforms.
3986 * configure.in: Enable libgcj for linux targets.
3990 * Makefile.in (CONFIGURE_TARGET_MODULES): Pass back configuration
3991 failures of subdirectories.
3995 * configure: handle DOS-style absolute paths.
3999 * configure.in: remove supported directories from $noconfigdirs for DJGPP.
4003 * Makefile.in (BASE_FLAGS_TO_PASS): Alphabetize.
4004 (libstdcxx_incdir): Pass down.
4005 * config.if: Remove expired bits for cxx_interface, add stub.
4006 (libstdcxx_incdir): Add variable for g++ include directory.
4007 * configure.in (gxx_include_dir): Use it.
4011 * configure.in: Handle lang_dirs.
4015 * configure.in: Disable libgcj for any target not specifically
4016 listed. Disable libgcj for x86 and Alpha Linux until compatible
4021 * Makefile.in (local-distclean): Also remove fastjar.
4025 * configure.in: Define libgcj. Disable libgcj target libraries for
4030 * configure.in (target_libs): Revert 2000-12-08 patch.
4031 (noconfigdirs): Added target-libjava.
4035 * Makefile.in: handle DOS-style absolute paths.
4039 * Makefile.in (TARGET_CONFIGDIRS): Wrong place. Removed note about
4041 * configure.in (target_libs): Removed `target-libjava'.
4045 * Makefile.in (TARGET_CONFIGDIRS): Added note about libjava.
4046 (ALL_MODULES): Added fastjar.
4047 (NATIVE_CHECK_MODULES, INSTALL_MODULES, CLEAN_MODULES): Likewise.
4048 (all-target-libjava): all-fastjar replaces all-zip.
4049 (all-fastjar): Added.
4050 (configure-target-fastjar, all-target-fastjar): Likewise.
4051 * configure.in (host_tools): Added fastjar.
4055 * Makefile.in (local-distclean): Remove leftover built files.
4059 * configure.in (enable_libstdcxx_v3): Fix typo,
4060 libstd++ -> libstdc++.
4064 * configure: Provide the original toplevel configure arguments
4065 (including $0) to subprocesses in the environment rather than
4066 through gcc/configargs.h.
4070 * configure: Turn on libstdc++ V3 by default.
4074 * configure (gcc/configargs.h): Only create if there is a build GCC
4079 * configure: Save configure arguments to gcc/configargs.h.
4083 * Makefile.in (bootstrap): avoid recursion if subdir missing
4085 (do-proto-toplev): ditto
4089 * configure.in: Do not build byacc for hppa64. Provide paths to the
4090 X11 libraries for hppa64.
4094 * Makefile.in (all-gcc): Depend on all-zlib.
4095 (CLEAN_MODULES): Add clean-zlib.
4096 (ALL_MODULES): Add all-zlib.
4097 * configure.in (host_libs): Add zlib.
4101 * configure.in (FLAGS_FOR_TARGET): Use $target_configdirs and
4102 $targargs to tell whether newlib is going to be built.
4104 * configure.in [disable-libstdcxx-v3] (libstdcxx_flags): Search
4105 $$r/TARGET_SUBDIR/libio for _G_config.h.
4109 * configure.in (libstdcxx_flags): Remove -isystem $$s/libio/stdio.
4111 * configure: Make enable_threads and enable_shared defaults
4112 explicit. Substitute enable_threads into generated Makefiles.
4113 * configure.in: Accept *-*-linux* not just *-*-linux-gnu*.
4114 * libtool.m4: Accept *-*-linux* not just *-*-linux-gnu*.
4118 * configure.in: Re-enable all references to libg++ and librx.
4122 * configure.in: Add *-*-freebsd* configurations.
4126 * Makefile.in (do-tar-bz2): Delete rule. Replace with ...
4127 (do-tar, do-bz2): New rules.
4128 (taz): Update. Replace do-tar-bz2 with do-tar and do-bz2.
4129 (gdb-tar): New rule.
4130 (gdb-taz): Rewrite. Use gdb-tar and do-bz2.
4131 (insight_dejagnu.tar): New rule.
4132 (insight.tar): New rule.
4133 (gdb+dejagnu.tar): New rule.
4134 (gdb.tar): New rule.
4138 * MAINTAINERS: Update dejagnu/
4142 * ltmain.sh (relink_command): Fix typo in previous change.
4146 * ltmain.sh (taglist): Initialized. Don't let `CC' tag out of it.
4147 (relink_command): Added --tag flags.
4148 (mode=install): If relinking fails; error out.
4152 * Makefile.in (NOTPARALLEL): New. Use it instead of explicit
4154 (do-check): Rename from check.
4155 (check): Allow parallel check.
4159 * Makefile.in (.NOTPARALLEL): Add fake tag.
4163 * configure.in: Enable gprof for mips*-*-linux*.
4167 * configure.in (libstdcxx_flags): Don't add libstdc++-v3 flags for
4169 (CXX_FOR_TARGET): Add -shared-libgcc for libstdc++-v3 and libjava.
4173 * texinfo/texinfo.tex: Update to version 2002-02-14.08.
4177 * config.guess: Import from master sources, rev 1.232.
4178 * config.sub: Import from master sources, rev 1.246.
4182 * Makefile.in (MAKEINFO): Don't assume makeinfo will be built just
4183 because its Makefile is there; test for the executable instead.
4187 Contribute sh64-elf.
4189 * configure.in: Added sh64-*-*.
4193 * COPYING.NEWLIB: Remove advertising clause from
4194 Berkeley and Red Hat licenses.
4198 * Makefile.in: Add all-tix to deps for all-snavigator
4199 so that tix is built when building snavigator.
4203 * config.guess: Import from master sources, rev 1.229.
4204 * config.sub: Import from master sources, rev 1.240.
4209 * libtool.m4 (HPUX_IA64_MODE): Set to 32 or 64 based on ABI.
4210 (lt_cv_deplibs_check_method, lt_cv_file_magic_cmd,
4211 lt_cv_file_magic_test_file): Set to appropriate values for HP-UX
4213 * ltcf-c.sh (archive_cmds, hardcode_*): Ditto.
4214 * ltconfig (shlibpath_*, dynamic_linker, library_names_spec,
4215 soname_spec, sys_lib_search_path_spec): Ditto.
4219 * configure.in (*-*-netbsd*): New. Skip target-newlib,
4220 target-libiberty, and target-libgloss. Skip Java-related
4221 libraries if not supported for NetBSD on target CPU.
4225 * configure.in: Import StrongARM and XScale target_configdirs from
4230 * config.guess: Import from master sources, rev 1.225.
4231 * config.sub: Import from master sources, rev 1.238.
4233 * MAINTAINERS: Updated notes on config.guess and config.sub.
4237 * configure.in (ia64*-*-hpux*): New target for IA64 HP-UX,
4238 ld and gdb are not supported.
4242 * Change reference to Cygnus Solutions to be Red Hat.
4246 * COPYING.NEWLIB: Update generic copyright date.
4250 * configure.in: Remove target-bsp and target-cygmon from arm builds.
4251 Allow target-libgloss to be built for arm, strongarm, and xscale.
4255 * MAINTAINERS: Update URL for config.* scripts.
4259 * config.sub: Import latest version.
4260 * config.guess: Likewise.
4264 * configure.in (FLAGS_FOR_TARGET): Remove -nostdinc and -isystem
4265 options for i[3456]86-pc-linux* native builds.
4269 * MAINTAINERS: gcc adopts symlink-tree, refer more to
4272 Import this patch from gcc:
4276 * symlink-tree: handle DOS-style absolute paths.
4281 When build != host, create libiberty for the build machine.
4283 * Makefile.in (TARGET_CONFIGARGS, BUILD_CONFIGARGS): Replace
4285 (ALL_BUILD_MODULES_LIST, BUILD_CONFIGDIRS, BUILD_SUBDIR):
4287 (ALL_BUILD_MODULES, CONFIGURE_BUILD_MODULES): New variables
4289 (all.normal): Depend on ALL_BUILD_MODULES.
4290 (CONFIGURE_TARGET_MODULES rule): Use TARGET_CONFIGARGS.
4291 (all-build-libiberty): Depend on configure-build-libiberty.
4293 * configure: Calculate and substitute proper value for
4295 * configure.in: Create the build subdirectory.
4296 Calculate and substitute TARGET_CONFIGARGS (formerly
4297 CONFIG_ARGUMENTS); also BUILD_SUBDIR and BUILD_CONFIGARGS (new).
4301 * config.sub: Update to version 1.232 on subversion.
4305 * Makefile.in (do-proto-toplev): Use msgfmt to generate .gmo
4306 files from .po files for a distribution.
4310 * COPYING.NEWLIB: Mention preserved notice in specific parts.
4314 Merged from net gcc:
4316 * ltcf-c.sh: Use $objext, not $ac_objext.
4318 * ltcf-cxx.sh: Add support for GNU.
4320 * ltcf-c.sh: Don't disable shared libraries for AIX5/IA64. Preserve
4321 default settings if using GNU tools with that configuration.
4322 * ltcf-cxx.sh: Ditto.
4323 * ltcf-gcj.sh: Ditto.
4325 * ltconfig: Set max_cmd_len to a maximum of 512Kb, as it seems some
4326 HPUX 11.0 systems have trouble with 1MB. Mark as gcc-local.
4327 * ltmain.sh: Mark as gcc-local.
4331 * Makefile.in (all-bison): Revert 2001-10-24.
4332 Don't depend on texinfo.
4336 * COPYING.NEWLIB: Add BSD-style license/copyright blurb for my work.
4340 * configure.in (--enable-languages): Be more permissive about
4341 syntax. Check for empty lists better. Warn about $LANGUAGES.
4345 * Makefile.in (MAKEINFO): Use "missing" for makeinfo older than 4.0.
4349 Makefile.in (all-bison): Don't depend on texinfo.
4353 * gettext.m4: Test po/POTFILES.in exists before trying to read.
4357 * Makefile.in (configure-target-gperf): Depend on $(ALL_GCC_CXX).
4361 * config.sub, config.guess: Import latest from subversions.
4365 * Makefile.in (AS_FOR_TARGET, LD_FOR_TARGET,
4366 DLLTOOL_FOR_TARGET, WINDRES_FOR_TARGET, AR_FOR_TARGET,
4367 RANLIB_FOR_TARGET, NM_FOR_TARGET): Don't use double quotes to
4368 avoid quotes nesting problems.
4369 (NATIVE_CHECK_MODULES): Ditto, just for consistency.
4370 (DO_X): Export only variables that are set.
4374 * configure.in (sparc-sun-solaris2*): Don't use /usr/bin/which on
4375 Solaris when testing for the /usr/ucb/cc compiler; it has incorrect
4376 semantics. Use the shell built-in "type" command instead.
4380 * config.sub: Reverted the earlier change, this version is not the
4385 * config.sub: Change machine triplets from mipsel*-* to mips*el-*.
4386 Add support for mips64.
4390 * configure.in: Enable libstdc++-v3 for h8300 targets.
4395 * config.sub: Add support for mipsisa32.
4399 * config.sub, config.guess: Import latest from subversions.
4403 * config.sub, config.guess: Import latest from subversions.
4407 * MAINTAINERS: Clarify libiberty merge rules and procedures.
4411 * Makefile.in: Revert 2001-06-17.
4412 (VER): If AM_INIT_AUTOMAKE uses BFD_VERSION, get version from bfd/.
4416 * Makefile.in (gas.tar.bz2): Pass TOOL=bfd PACKAGE=gas to make.
4417 (gas+binutils.tar.bz2): Likewise.
4418 (binutils.tar.bz2): Pass TOOL=bfd PACKAGE=binutils to make.
4422 * Makefile.in (VER): When present, extract the version number from
4423 the file version.in.
4427 * Makefile.in (AS_FOR_TARGET, LD_FOR_TARGET, NM_FOR_TARGET): If
4428 gcc/xgcc is built, use -print-prog-name to find out the program
4433 * ltcf-c.sh (archive_cmds, archive_expsym_cmds) [solaris,
4434 with_gcc]: Use `gcc -shared' to build a shared library.
4438 * ltcf-c.sh (archive_cmd) [hpux, with_gcc]: Use gcc to link shared
4443 * ltcf-cxx.sh (osf3/osf4/osf5): Support creation of C++ shared
4444 libraries when using g++ with native linker.
4448 * ltconfig, ltmain.sh: Upgrade to libtool 1.4a 1.641.2.256.
4452 * configure.in : enable ld for aix
4456 * ltcf-cxx.sh (allow_undefined_flag, no_undefined_flag)
4457 [aix4*|aix5*]: Prepend blank.
4461 * ltconfig, ltmain.sh, libtool.m4, ltcf-c.sh, ltcf-cxx.sh,
4462 ltcf-gcj.sh: Upgraded to libtool 1.4a 1.641.2.254. Rebuilt a number
4463 of subdir/configure scripts to use the new libtool.m4.
4467 * config.if (libc_interface): Set to -libc6.2- for cross
4468 compiling to Linux/glibc 2.2.
4472 * configure.in (noconfigdirs) [*-cygwin*, *-mingw*, *-beos]: Disable
4477 * configure.in (noconfigdirs): Don't reset it from scratch in the
4478 target case; only append to it.
4482 * configure.in (noconfigdirs) [hppa*-*-*, mips*-*-irix6*,
4483 sparc-*-solaris2.8]: Disable ${libgcj}.
4487 * configure.in (libgcj_saved): Copy from $libgcj.
4488 (libgcj): Zero out if --enable-libgcj; add to noconfigdirs is
4493 * ltconfig, ltmain.sh, ltcf-cxx.sh: Upgraded to libtool 1.4a
4498 * ltconfig, ltmain.sh, libtool.m4, ltcf-c.sh, ltcf-cxx.sh,
4499 ltcf-gcj.sh: Upgraded to libtool 1.4a 1.641.2.226.
4503 * Makefile.in (CXX_FOR_TARGET_FOR_RECURSIVE_MAKE, RECURSE_FLAGS):
4505 (bootstrap, cross): Use RECURSE_FLAGS.
4506 * configure.in: Subst CXX_FOR_TARGET_FOR_RECURSIVE_MAKE.
4510 * configure.in (CXX_FOR_TARGET): Use xgcc for libstdc++-v3.
4514 * README-maintainer-mode: Add note about inability to use "make
4515 distclean" in maintainer mode.
4521 * ltcf-c.sh: Clear ac_cv_prog_cc_pic for DJGPP. Do not add
4522 '-DPIC' to ac_cv_prog_cc_pic for DJGPP.
4523 * ltcf-cxx.sh: Likewise.
4524 * ltcf-gcj.sh: Likewise.
4528 * config.sub, config.guess: Import latest from subversions.
4532 * ltconfig, ltmain.sh, libtool.m4, ltcf-c.sh, ltcf-cxx.sh,
4533 ltcf-gcj.sh: Upgraded to libtool 1.4a 1.641.2.198.
4537 * Makefile.in: all-m4 depends on all-texinfo.
4541 * Makefile.in (ALL_GCC, ALL_GCC_C, ALL_GCC_CXX): Set before use.
4545 * COPYING.NEWLIB: Remove DJ Delorie's address because it is no
4550 * configure.in (noconfigdirs): Allow configuration of texinfo
4555 * config.guess: Add linux target for S/390.
4556 * config.sub: Likewise.
4557 * configure.in: Likewise.
4561 * configure: Output host type to stdout, not stderr.
4565 * config.guess: Import from subversions.gnu.org (revision 1.181).
4566 * config.sub: Import from subversions.gnu.org (revision 1.199).
4570 * config.guess: Handle hppa64-linux systems.
4574 * ltcf-cxx.sh (ac_cv_prog_cc_pic_works, ac_cv_prog_cc_static_works):
4575 Don't unset, it's non-portable and no longer necessary, set to empty
4580 * ltconfig: Shell portability fix for the tagname validity check.
4584 * ltcf-cxx.sh: Use parentheses around eval $ac_compile.
4588 * ltcf-c.sh (ld_shlibs) [aix5*]: Disable on unknown CPU types.
4589 * ltcf-cxx.sh, ltcf-gcj.sh: Likewise.
4593 * ltmain.sh (TAG disable-shared, TAG disable-static): Make sure we
4594 keep at least one of build_libtool_libs or build_old_libs set to
4599 * ltcf-gcj.sh (lt_simple_link_test_code): Remove stray `(0)'.
4600 * libtool.m4 (_AC_LIBTOOL_GCJ): Pass $CPPFLAGS on.
4604 * Makefile.in (ETC_SUPPORT): Also add configbuild.* and configdev.*.
4608 * Makefile.in (ETC_SUPPORT): Add configure.texi and associated info
4613 * COPYING.NEWLIB: Put into source repository.
4617 * configure.in (host_tools): Add sid.
4618 Always configure cgen.
4619 * Makefile.in (all-sid): New target.
4620 (check-sid, clean-sid, install-sid): Likewise.
4624 * config.sub, config.guess: Update from subversions.
4628 * configure.in: Disable language-specific target libraries for
4629 languages that aren't enabled.
4633 * configure.in (xscale-elf): Add target.
4634 (xscale-coff): Add target.
4635 (c4x, c5x, tic54x): Move after ARM targets.
4639 * ltcf-gcj.sh: Added file, required by 2000-11-18 merge.
4643 * ltcf-cxx.sh: Added file, required by 2000-11-18 merge.
4647 * Makefile.in: Merge with GCC and libgcj.
4648 (ALL_GCC_C, ALL_GCC_CXX): New macros. Use them as dependencies of
4649 configure-target-<library> when their configure scripts need the C
4650 or C++ library to have already been built to work properly.
4651 (do_proto_toplev): Set them to an empty string.
4655 * Makefile.in (HOST_LIB_PATH, TARGET_LIB_PATH): New macros.
4656 (REALLY_SET_LIB_PATH): Use them.
4660 * config.sub: Add support for Sun Chorus
4664 * config.sub: Add support for the *-storm-chaos OS.
4668 * configure.in (noconfigdirs): Don't compile some
4669 of the libraries for 68HC11 & 68hc12 targets.
4673 * ltconfig, ltmain.sh, libtool.m4: Updated from libtool
4674 multi-language branch, to work around Solaris' /bin/sh bug. Rebuilt
4675 all affected `configure' scripts.
4679 * Makefile.in (DEVO_SUPPORT): Added gettext.m4, libtool.m4 and
4684 * config.sub, config.guess: Update from subversions.
4688 * Makefile.in (all-zlib): Added dummy target.
4690 * ltconfig, ltmain.sh, libtool.m4, ltcf-c.sh: Updated from libtool
4691 multi-language branch.
4695 * Makefile.in (all-bootstrap): Added all-texinfo and all-zlib.
4696 (bootstrap*): Depend on all-bootstrap.
4700 * configure.in (FLAGS_FOR_TARGET): Use -nostdinc even for Canadian
4701 crosses, but add gcc/include to the header search path for them.
4705 * ltconfig, ltmain.sh: Updated from libtool multi-language branch.
4706 * libtool.m4, ltcf-c.sh: Copied from libtool multi-language branch.
4707 * gettext.m4: New file, extracted from aclocal.m4.
4711 * config-ml.in (CC, CXX): Avoid trailing whitespace.
4712 (LD_LIBRARY_PATH, SHLIB_PATH): Adjust for multilibs and export to
4717 * Makefile.in (ALL_MODULES): Add all-cgen.
4718 (CROSS_CHECK_MODULES,INSTALL_MODULES,CLEAN_MODULES): Similarily.
4719 (all-cgen): New target.
4720 (all-opcodes,all-sim): Depend on all-cgen.
4721 * configure.in (host_tools): Add cgen.
4722 Only configure cgen if --enable-cgen-maint.
4726 * config-ml.in (CC, CXX): Don't introduce a leading space.
4730 * configure.in (libstdcxx_flags): Use
4731 libstdc++-v3/src/libstdc++.INC.
4735 * configure.in (libstdcxx_flags): Use libstdc++-v3/src/INCLUDES.
4739 * configure.in (CC_FOR_TARGET, CHILL_FOR_TARGET,
4740 CXX_FOR_TARGET): Add -B$$r/gcc/ here.
4741 (FLAGS_FOR_TARGET): Not here.
4742 (CHILL_FOR_TARGET, CXX_FOR_TARGET): Don't check the list of languages.
4746 * configure.in (FLAGS_FOR_TARGET): invert test for xgcc, should mean
4747 "if we're also building gcc, and it's a gcc that will run on the
4748 build machine, we want to use its includes instead of the system's
4753 * configure.in (libstdcxx_flags): Don't use `"'.
4755 * config-ml.in: Adjust multilib search paths to the
4756 appropriate multilib tree.
4760 * configure.in (CHILL_FOR_TARGET, CXX_FOR_TARGET): Convert blanks to
4761 commas in $LANGUAGES.
4765 * configure.in (qCXX_FOR_TARGET): Use echo instead of expr.
4769 * configure.in (qCXX_FOR_TARGET): Quote `&' characters in
4770 CXX_FOR_TARGET for sed.
4774 * configure.in (CC_FOR_TARGET, CHILL_FOR_TARGET, CXX_FOR_TARGET):
4775 Do not override if already set in the environment or in configure.
4776 Don't duplicate $(FLAGS_FOR_TARGET) if it already appears in them.
4777 (FLAGS_FOR_TARGET): Don't use host directories on Canadian crosses.
4781 * Makefile.in (FLAGS_FOR_TARGET): New macro.
4782 (GCC_FOR_TARGET): Use it.
4783 (CC_FOR_TARGET, CXX_FOR_TARGET, CHILL_FOR_TARGET): Now defined...
4784 * configure.in: ... here.
4785 (FLAGS_FOR_TARGET): Define. Add ld build dir to -L path.
4786 (libstdcxx_flags): Define and append to CXX_FOR_TARGET.
4790 * Makefile.in (configure-target-libf2c): Depend on $(ALL_GCC).
4791 (configure-target-libchill, configure-target-libobjc): Likewise.
4793 * configure.in: Use the same cache file for all target libs.
4794 * config-ml.in: But different cache files per multilib variant.
4798 * configure (topsrcdir): Don't use dirname.
4802 * configure.in: Remove all references to libg++ and librx.
4804 * configure, configure.in, Makefile.in: Unify gcc and binutils.
4808 * config.sub: Update to subversions version 2000-07-06.
4812 * configure.in (host_makefile_frag): Use mh-ia64pic on IA-64 hosts.
4813 (target_makefile_frag): Use mt-ia64pic on IA-64 targets.
4817 * symlink-tree: Check number of arguments.
4821 * texinfo/texinfo.tex: Update to version 2000-05-28.15.
4825 * Makefile.in (CXX_FOR_TARGET): Add libstdc++ to the library
4826 search path for a g++ extracted from the build tree. This
4827 will allow link tests run by configure scripts in
4828 subdirectories to succeed.
4832 * ltconfig: Add support for mips-dde-sysv4.2MP
4836 * ltconfig: Check for host_os beeing one of `cygwin', `mingw' or
4837 `os2'. Force ac_cv_exeext to be ".exe" in that case.
4841 * configure.in (noconfigdirs): Set noconfigdirs for tic54x target.
4842 * config.sub: Add tic54x target.
4846 * README-maintainer-mode: New file: Contains notes on using
4847 --enable-maintainer-mode with binutils.
4851 * texinfo/texinfo.tex: Update. Version from makeinfo 4.0.
4855 * config.sub: Import CVS version 1.167 Tue May 30 09:00:07 2000.
4856 * config.guess: Import CVS version 1.148 Tue May 30 09:00:06 2000
4860 * Makefile.in (CC_FOR_TARGET): Make sure as/ld in the gcc
4861 directory are used if they exist. Make sure
4862 $(build_tooldir)/include is searched for header files,
4863 $(build_tooldir)/lib/ for library files.
4864 (GCC_FOR_TARGET): Likewise.
4865 (CXX_FOR_TARGET): Likewise.
4869 * configure.in (hppa*64*-*-*): Do build ld for this configuration.
4873 * Makefile.in (configure-target-libiberty): Depend on
4874 configure-target-newlib.
4878 * configure.in, Makefile.in: Merge all libffi-related
4879 configury stuff from the libgcj tree.
4884 * Makefile.in (do-tar-bz2, do-md5sum): Skip CVS directories.
4889 * Makefile.in (do-djunpack): New target. Update djunpack.bat with
4890 current version information. Add to proto-toplev directory.
4891 (gdb-taz): Build do-djunpack.
4895 * configure.in: Special case powerpc*-*-aix* target_makefile_frag.
4899 * ltmain.sh: Preserve in relink_command any environment
4900 variables that may affect the linker behavior.
4904 * config.sub (basic_machine): Recognize hppa64 as a valid cpu type.
4908 * configure.in (ia64*-*-elf*): Add gdb and friends to noconfigdirs.
4912 * djunpack.bat: Change the Sed script to replace @V@ in fnchange.lst
4913 with the version name.
4921 * djunpack.bat: New file.
4925 * Makefile.in (taz, gdb-taz, gas.tar.bz2, binutils.tar.bz2,
4926 gas+binutils.tar.bz2, libg++.tar.bz2, gnats.tar.bz2, gdb.tar.bz2,
4927 dejagnu.tar.bz2, gdb+dejagnu.tar.bz2, insight.tar.bz2,
4928 insight+dejagnu.tar.bz2, newlib.tar.bz2): Pass MD5PROG to sub-make.
4932 * config.sub (case $basic_machine): Change default for "ibm-*"
4937 * Makefile.in (gdb-taz): New target. GDB specific archive.
4938 (do-md5sum): New target.
4940 (PACKAGE): Default to TOOL.
4941 (VER): Default to a shell script.
4942 (taz): Rewrite target. Move real work to do-proto-toplev. Include
4943 md5 checksum generation.
4944 (do-proto-toplev): New target. Create $(PACKAGE)-$(VER) link.
4945 (do-tar-bz2): Delete creation of $(PACKAGE)-$(VER) link.
4946 (gdb.tar.bz2, dejagnu.tar.bz2, gdb+dejagnu.tar.bz2,
4947 insight.tar.bz2): Use gdb-taz to create archive.
4951 * configure (warn_cflags): Delete.
4956 * configure.in (enable_libstdcxx_v3): Add.
4957 (target_libs): Add bits here to switch between libstdc++-v2 and
4959 * config.if: And this file too.
4960 * Makefile.in: Add libstdc++-v3 targets.
4964 * config.sub (d30v): Add d30v as a basic machine type.
4968 * configure.in: -linux-gnu*, not -linux-gnu.
4972 * Makefile.in (taz): Set PACKAGE to TOOL when not defined.
4973 (do-tar-bz2): Replace TOOL with PACKAGE.
4974 (gdb.tar.bz2): Remove GDBTK from GDB package.
4975 (gdb+dejagnu.tar.bz2, insight.tar.bz2, insight+dejagnu.tar.bz2,
4976 dejagnu.tar.bz2): New packages.
4980 * configure.in: Add entry for mips*-*-linux*, move catch all
4981 *-*-*linux* entry below this one.
4985 * ltconfig, ltmain.sh: Update to libtool 1.3.4.
4989 * config.sub: Support an OS of "wince".
4993 * config.guess, config.sub: Updated to match config's 2000-02-15
4998 * config.sub: Add support for Linux/IBM 370.
4999 * configure.in: Likewise.
5003 * configure.in: Add mips-pe, sh-pe and arm-wince-pe targets.
5007 * config.guess: Guess "cygwin" rather than "cygwin32".
5011 * configure (gcc_version): When setting, narrow search to
5012 lines containing `version_string'.
5016 * config.sub: Add support for avr target.
5020 * config.sub: Add mmix-knuth-mmixware.
5024 * Makefile.in (CC_FOR_TARGET): Add new winsup directory
5025 structure stuff to -L library search.
5026 (CXX_FOR_TARGET): Ditto.
5027 (CROSS_CHECK_MODULES): Fix spelling mistake.
5031 * Makefile.in (CXX_FOR_TARGET): Use g++, not xgcc, to invoke
5036 * configure.in: Don't build some bits for beos.
5040 * Makefile.in (CC_FOR_TARGET): Use newlib libraries as well
5045 * configure.in: Use mt-aix43 to handle *_TARGET defs,
5050 * config.guess (alpha-osf, alpha-linux): Detect ev67.
5051 * config.sub: Accept alphaev[78], alphaev8.
5055 * config.guess, config.sub: Update from autoconf.
5059 * config-ml.in (sparc*-*-*): Disable sparcv9 support if the
5060 necessary libraries are missing.
5064 * configure: Fix quoting inside arguments of eval.
5068 * config-ml.in: Allow suppression of some ARM multilibs.
5072 * config.guess: Add OS/390 match pattern.
5073 * config.sub: Add mvs, openedition targets.
5074 * configure.in (i370-ibm-opened*): New.
5078 * config.sub: Add support for configuring for pj.
5082 * config.sub (maybe_os): Add support for configuring for fr30.
5086 * configure.in: Do not configure or build ld for AIX
5087 platforms. ld is known to be broken on these platforms.
5091 * config-ml.in: Pass compiler flag corresponding to multidirs to
5096 * Makefile.in (LDFLAGS): Define.
5100 * configure.in (i[3456]-*-mingw32*): Don't put gprof in
5102 (*-*-cygwin*): Likewise.
5107 * Makefile.in (GAS_SUPPORT_DIRS): Add mkdep.
5108 (BINUTILS_SUPPORT_DIRS): Add mkdep.
5111 * configure (tmpfile): Change cONf$$ to cNf$$ to avoid an overly
5112 long file name when using DJGPP on MS-DOS.
5116 * config.sub (vxworks case): Use os=-vxworks, not os=vxworks.
5120 * Makefile.in (check-target-libio): Remove all-target-libstdc++
5121 dependency as this causes "make check" to globally "make all"
5125 * configure.in (target_libs): Added target-zlib.
5126 * Makefile.in (ALL_TARGET_MODULES): Added zlib.
5127 (CONFIGURE_TARGET_MODULES): Likewise.
5128 (CHECK_TARGET_MODULES): Likewise.
5129 (INSTALL_TARGET_MODULES): Likewise.
5130 (CLEAN_TARGET_MODULES): Likewise.
5131 (configure-target-zlib): New target.
5132 (all-target-zlib): Likewise.
5133 (all-target-libjava): Depend on all-target-zlib.
5134 (configure-target-libjava): Depend on configure-target-zlib.
5136 * Makefile.in (configure-target-libjava): Depend on
5137 configure-target-newlib.
5138 (configure-target-boehm-gc): New target.
5139 (configure-target-qthreads): New target.
5141 * configure.in (target_libs): Added target-qthreads.
5142 * Makefile.in (ALL_TARGET_MODULES): Added qthreads.
5143 (CONFIGURE_TARGET_MODULES): Likewise.
5144 (CHECK_TARGET_MODULES): Likewise.
5145 (INSTALL_TARGET_MODULES): Likewise.
5146 (CLEAN_TARGET_MODULES): Likewise.
5147 (all-target-qthreads): New target.
5148 (configure-target-libjava): Depend on configure-target-qthreads.
5149 (all-target-libjava): Depend on all-target-qthreads.
5151 * Makefile.in (ALL_TARGET_MODULES): Added libjava, boehm-gc.
5152 (CONFIGURE_TARGET_MODULES): Likewise.
5153 (CHECK_TARGET_MODULES): Likewise.
5154 (INSTALL_TARGET_MODULES): Likewise.
5155 (CLEAN_TARGET_MODULES): Likewise.
5156 (all-target-libjava): New target.
5157 (all-target-boehm-gc): Likewise.
5158 * configure.in (target_libs): Added libjava, boehm-gc.
5162 * Makefile.in (binutils.tar.bz2): Don't pass makeall.bat and
5163 configure.bat in SUPPORT_FILES.
5164 (gas+binutils.tar.bz2): Likewise.
5166 * makeall.bat: Remove; obsolete.
5171 * configure.bat: Remove; obsolete.
5175 * configure: Add -W -Wall to the default CFLAGS when compiling with
5180 * configure.in: Build ld, binutils & gas for hppa*-*-linux-gnu*.
5184 * configure.in: Build ld on IRIX6.
5188 * Makefile.in: Change distribution targets to use bzip2 instead of
5190 (TEXINFO_SUPPORT): Set to just texinfo/texinfo.tex.
5191 (taz): Don't use texinfo/gpl.texinfo or texinfo/lgpl.texinfo.
5195 * config.sub: Add mcore target.
5199 * config.guess (ppc-*-linux-gnu): Also use ld emul elf32ppclinux.
5203 * config.guess (dummy): Changed to $dummy.
5207 * config.sub: Tidied up case statements.
5211 * config.guess: Handle NEC UX/4800. Contributed by Jiro Takabatake
5214 * config.guess: Merge with FSF version. Future changes will be
5215 more accurately recorded in this ChangeLog.
5216 * config.sub: Likewise.
5220 * Makefile.in (GCC_FOR_TARGET): Add -I$(build_tooldir)/include.
5224 * ltmain.sh: [mode link] Always use CC given by ltconfig.
5228 * ltconfig, ltmain.sh: Update to libtool 1.2f.
5232 * configure.in (noconfigdirs): Don't build libstub for arm-elf targets.
5233 (noconfigdirs): Don't build any bsp stuff for for arm-oabi targets.
5234 Bad merge removed these two changes.
5239 * config.guess (interix Alpha): Add.
5243 * configure.in (i?86-*-beos*): Do config gperf; don't config
5244 gdb, newlib, or libgloss.
5248 * config-ml.in: On mips*-*-*, if multidirs contains mabi=64, try to
5249 link a trivial program with -mabi=64. If it fails, remove mabi=64
5254 * config.sub: Set basic_machine to i586 when target_alias = k6-*.
5258 * config.sub: Add support for mcore targets.
5262 * configure.in (d30v-*): Use config/mt-d30v as makefile fragment,
5263 not mt-ospace, in order to shut up assembler warning about using
5264 symbols that are named the same as registers.
5268 * Makefile.in (all-target-cygmon): Added all-target-bsp to the
5269 dependency list for all-target-cygmon.
5273 * config-ml.in: Check $host, not $target, for selective multilibs.
5274 (arm-*-*): Allow disabling of biendian, h/w fp, 26 bit apcs,
5275 thumb interworking, and underscore prefix multilibs.
5279 * missing: Update to version from current automake.
5283 * configure (gxx_include_dir): Removed.
5285 * configure.in (gxx_include_dir): Handle it.
5286 * Makefile.in: Likewise.
5290 * config.sub (mips64vr4111,mips64vr4111el) Add.
5294 * config.guess: Correct typo for detecting ELF on FreeBSD.
5298 * configure.in (pc-msdosdjgpp): Set host_makefile_frag to
5303 * Makefile.in (all-target-bsp): Added all-gcc all-binutils and
5304 all-target-newlib to dependency list for all-target-bsp.
5308 * config.sub: Add i386-uwin support.
5309 * config.guess: Likewise.
5313 * configure.in: cleanup, add mh-*pic handling for arm, special
5314 case powerpc*-*-aix*
5318 * configure.in (noconfigdirs): Removed target-libgloss so libnosys.a
5323 * configure.in: Added bsp support to arm-*-coff and arm-*-elf
5328 * config.sub: Rename CYGNUS LOCAL to EGCS LOCAL
5332 * config.sub: Check for "cygwin*" rather than "cygwin32*"
5336 * config.sub: Fix typo in arm recognition.
5340 * configure.in (noconfigdirs): Changed target_configdirs to
5341 include target-bsp only for m68k-*-elf* and m68k-*-coff*
5342 rather than m68k-*-* since it is not known to work on
5343 m68k-aout. Ditto for arm-*-*oabi.
5347 * configure.in (*-*-windows*): Remove, no longer used.
5351 * config.guess: Automatically recognise ELF on FreeBSD. From Niall
5352 Smart and improved by Andrew Cagney.
5356 * config.guess: Recognize openbsd-*-hppa.
5360 * Makefile.in (REALLY_SET_LIB_PATH): Append $$$(RPATH_ENVVAR)
5361 only if it is not empty.
5367 * config.guess: Modified to recognize uname's armv* syntax.
5369 * config.sub: Modified to recognize uname's armv* syntax.
5373 * configure.in: Added target-bsp for sparclite.
5377 * config.sub: Recognize alphapca5[67] and up to alphaev8.
5381 * configure.in: Add support for strongarm port.
5382 * config.sub: Add support for strongarm target.
5386 * configure.in (*-*-cygwin32*): Use config/mh-cygwin instead of
5387 the old name config/mh-cygwin32.
5392 * configure.in: Do build ld for ix86 Solaris.
5396 * Makefile.in (EXTRA_GCC_FLAGS): Set AR to $AR instead of
5397 $AR_FOR_TARGET. Likewise for RANLIB.
5401 * config.sub (oabi): Recognize.
5402 * configure.in (arm-*-oabi): Handle.
5406 * config.guess: Improve detection of i686 on UnixWare 7.
5410 * config.guess: Add support for i386-pc-interix.
5411 * config.sub: Likewise.
5412 * configure.in: Likewise.
5416 * Makefile.in: Remove unneeded all-target-libio from
5417 from all-target-winsup target since it is now unneeded.
5418 Add all-target-libtermcap in its place since it is now
5423 * configure.in: makefile stub for cygwin target is probably
5424 unnecessary. Remove it for now.
5428 * configure.in: libtermcap.a should be built when cygwin is the
5429 target as well as the host.
5430 * config.guess: Allow mixed case in cygwin uname output.
5431 * Makefile.in: Add libtermcap target.
5435 * config.sub: Clean up handling of hppa2.0.
5439 * config.guess: Use C code to identify more HP machines.
5443 * config.sub: Handle hppa2.0.
5447 * configure.in: Add cygmon for x86-coff and x86-elf. Configure
5448 cygmon for all sparclite targets, regardless of object format.
5452 * configure.in: Added target-bsp for several target architectures.
5454 * Makefile.in: Added rules for bsp.
5458 * config.guess: Improve detection of hppa2.0 processors.
5462 * config.guess: Recognize FreeBSD using ELF automatically.
5466 * configure (skip-this-dir): Add handling for new shell script, which
5467 might be created by a sub-directory's configure to indicate, this particular
5468 directory is "unwanted".
5469 * Makefile.in ($(CONFIGURE_TARGET_MODULES)): Likewise.
5473 * ltconfig: import from libtool, after changing libtool to
5474 account for the cygwin name change.
5478 * Makefile.in: CC_FOR_TARGET and CXX_FOR_TARGET should also
5479 include newlib/libc/sys/cygwin and newlib/libc/sys/cygwin32.
5483 * configure.in: Add libtermcap to list of cygwin dependencies.
5487 * Makefile.in: modify CC_FOR_TARGET and CXX_FOR_TARGET so that
5488 they include winsup/include when it's a cygwin target.
5492 * configure.in (host_tools): Added zip.
5493 * Makefile.in (all-target-libjava): Depend on all-zip.
5494 (all-zip): New target.
5495 (ALL_MODULES): Added all-zip.
5496 (NATIVE_CHECK_MODULES): Added check-zip.
5497 (INSTALL_MODULES): Added install-zip.
5498 (CLEAN_MODULES): Added clean-zip.
5502 * Makefile.in: lose "32" from comment about cygwin.
5506 * configure.in: Use -Os to build target libraries for the fr30.
5510 * config.sub: Add fr30.
5514 * configure.in: drop "32" from config/mh-cygwin32. Check
5515 cygwin* instead of cygwin32*.
5516 * config.sub: Check cygwin* instead of cygwin32*.
5520 * config.guess: Match any version of Unixware7.
5524 * Makefile.in configure.in: Add the ability to use tcl8.1 and tk8.1
5529 * config.if (cxx_interface, libstdcxx_interface): Do not try to set
5530 these if the appropriate directories and files to not exist.
5534 * Makefile.in (DEVO_SUPPORT): Add config.if.
5538 * configure: Add pattern to replace "build_tooldir"'s
5539 definition in the generated Makefile with "tooldir"'s
5544 * config.sub: Bring back lost sparcv9.
5546 * Makefile.in (all-snvavigator): Remove all-flexlm dependency.
5550 * Makefile.in (CHILL_FOR_TARGET): Mirror recent changes to
5551 CC_FOR_TARGET and friends.
5555 * Makefile.in (build_tooldir): New variable, same as tooldir.
5556 (CC_FOR_TARGET, GCC_FOR_TARGET, CXX_FOR_TARGET): Add
5557 -B$(build_tooldir)/bin/.
5558 (BASE_FLAGS_TO_PASS): Pass build_tooldir down.
5562 * config.sub: Add support for i[34567]86-pc-udk.
5563 * configure.in: Likewise.
5567 * Makefile.in: add bzip2 package building bits for user
5569 * configure.in: ditto
5573 * Makefile.in (TARGET_CONFIGDIRS): Add libobjc.
5574 (ALL_TARGET_MODULES): Add all-target-libobjc.
5575 (CONFIGURE_TARGET_MODULES, CHECK_TARGET_MODULES): Similarly.
5576 (INSTALL_TARGET_MODULES, CLEAN_TARGET_MODULES): Similarly.
5577 (all-target-libchill): Add dependencies.
5578 * configure.in (target_libs): Add libchill.
5582 * configure.in (target_subdir): Remove duplicate line.
5586 * Makefile.in (all-automake): fix dependencies.
5590 * configure.in: Minor cleanups for building in the $(target_alias)
5595 * Makefile.in (bootstrap): Set r and s before make all. Use
5596 BASE_FLAGS_TO_PASS in make all.
5601 * Makefile.in (bootstrap): Pass TARGET_FLAGS_TO_PASS to `make all'.
5605 * config.sub: Fix typo in last change.
5609 * config.sub: Add support for C4x target.
5610 * configure.in: Likewise.
5614 * config.sub: Recognize sparcv9 just like sparc64.
5618 * config.guess: Match "Pent II" or "PentII" for OpenServer.
5622 * config.guess: Correctly identify Pentium II sco boxes.
5624 * config.guess: Fix "tr" code. From Weiwen Liu.
5628 * configure.in: Do not assume x86-svr4 or x86-unixware can handle
5633 * Makefile.in (TARGET_CONFIGDIRS): Add libchill.
5634 (ALL_TARGET_MODULES): Add all-target-libchill.
5635 (CONFIGURE_TARGET_MODULES, CHECK_TARGET_MODULES): Similarly.
5636 (INSTALL_TARGET_MODULES, CLEAN_TARGET_MODULES): Similarly.
5637 (all-target-libchill): Add dependencies.
5638 * configure.in (target_libs): Add libchill.
5642 * config.guess: Avoid assumptions about "tr" behaves when
5643 LANG is set to something other than English.
5647 * configure (gxx_include_dir): Changed to
5648 '${prefix}/include/g++'-${libstdcxx_interface}.
5650 * config.if: New to determine the interfaces.
5654 * config.guess: Detect and handle MPE/IX.
5655 * config.sub: Deal with MPE/IX.
5659 * configure.in: Use mh-aix43.
5663 * configure: Fix --without/--disable cases for gxx-include-dir.
5667 * mdata-sh: Imported. Needed for automake support.
5671 * Makefile.in (taz): Try "chmod -R og=u ." before
5672 "chmod og=u `find . -print`".
5676 * configure.in: Add arm-elf and thumb-elf support.
5680 * Makefile.in: Undo previous patch.
5684 * Makefile.in (INSTALL_TARGET): Move EXTRA_TARGET_HOST_INSTALL_MODULES
5686 (install-no-fixedincludes): and here
5687 (INSTALL_MODULES): ... from here.
5691 * config.sub: Merge with FSF.
5693 * config.guess: Merge with FSF.
5697 * configure (extraconfigdirs): New variable.
5698 (SUBDIRS): Add extraconfigdirs and recurse on them too.
5699 * Makefile.in (all): Move higher in file.
5700 (EXTRA_TARGET_HOST_ALL_MODULES): New variable.
5701 (EXTRA_TARGET_HOST_{INSTALL,CHECK}_MODULES): New variables.
5702 (ALL_MODULES): Add EXTRA_TARGET_HOST_ALL_MODULES.
5703 (CROSS_CHECK_MODULES): Add EXTRA_TARGET_HOST_CHECK_MODULES.
5704 (INSTALL_MODULES): Add EXTRA_TARGET_HOST_INSTALL_MODULES.
5708 * Makefile.in (all-target-libjava): Depend on all-gcc and
5710 (configure-target-libjava): Depend on $(ALL_GCC).
5714 * config.guess: (*-pc-sco3.2v5) Add detection for Pentium II.
5715 (*-pc-unixware7) Add detection for Pentium II, Pentium Pro.
5719 * ylwrap: Change absolute path checks to check for DOS style path
5722 * ylwrap: Don't use a full path name if the source file is in the
5725 * config-ml.in: Default to being verbose, to match Feb 18 change to
5730 Brought over from egcs:
5734 * configure.in (target_subdir): Set to ${target_alias} instead
5739 * configure.in (target_subdir): Set to libraries if enable_multilib.
5743 * Makefile.in ($(CONFIGURE_TARGET_MODULES)): If there are any
5744 multilibs, force reconfiguration the first time we create
5745 multilib.out in a subdirectory, in case TARGET_SUBDIR is `.'.
5749 * configure.in: Strip any --no option from CONFIG_ARGUMENTS, to
5750 avoid confusion with --no-recursion.
5754 * configure.in: Win32 hosts shouldn't use install -x
5755 * install-sh: remove -x option, and special .exe-handling
5760 * config.guess: Recognize i586-pc-beos.
5761 * configure.in: Don't build some bits for beos.
5765 * configure: If CC is set but CFLAGS is not, and CC is gcc, make
5766 CFLAGS default to -O2.
5768 * ltmain.sh: Add some hacks to make SunOS --enable-shared work
5773 * ltmain.sh: Correct install when using a different shell.
5777 * ltconfig, ltmain.sh: Update to libtool 1.2b.
5781 * makefile.vms: Update to build binutils/makefile.vms. Add install
5786 * ltconfig: Update to correct AIX handling.
5790 * Makefile.in (BASE_FLAGS_TO_PASS): Add TARGET_SUBDIR.
5792 * configure.in (target_subdir): Set to ${target_alias} instead
5797 * Makefile.in (BASE_FLAGS_TO_PASS): Add gcc_version_trigger.
5798 (Makefile): Depend on $(gcc_version_trigger).
5800 * configure (gcc_version): Change default initializer to empty
5802 (gcc_version_trigger): New variable; pass this variable down
5803 to subdir configures to enable them checking gcc's version
5804 themselves. Emit make macros for both gcc_version vars.
5805 (topsrcdir): Initialize reliably.
5806 (recursion line): Remove --with-gcc-version=${gcc_version}.
5810 * configure (enable_version_specific_runtime_libs): Implement new flag
5811 --enable-version-specific-runtime-libs which installs C++ runtime stuff
5812 in $(libsubdir); emit definition in each generated Makefile.
5813 (gxx_include_dir): Initialize depending on
5814 $enable_version_specific_runtime_libs.
5818 * configure (gcc_version): Initialize properly depending on
5819 how and where configure is started.
5820 (recursion line): Pass a --with-gcc-version=${gcc_version}
5821 to configures in subdirs.
5825 * configure.in (noconfigdirs): Add configure pattern for mips tx39
5830 * configure.in: Add cygmon and libstub support for mn10200.
5834 * configure (gcc_version): Add new variable describing the
5835 particular gcc version we're building.
5836 * Makefile.in (libsubdir): Add new macro for the directory
5837 in which the compiler finds executables, libraries, etc.
5838 (BASE_FLAGS_TO_PASS): Pass down gcc_version, target_alias
5843 * Makefile.in (local-clean): Remove *.log.
5844 (warning.log): Built with warn_summary from build.log.
5845 (mail-report.log): Run test_summary.
5846 (mail-report-with-warnings.log): Run test_summary including
5847 warning.log in the report.
5851 * config.guess: Detection of Pentium II for *-sco-3.2v5*.
5855 * Makefile.in (grep): Grep no longer depends on libiberty.
5859 * Makefile.in: all-snavigator needs all-libgui.
5863 * configure.in: Add cygmon and libstub support for mn10300.
5867 * missing: Update to version from automake 1.3.
5869 * ltmain.sh: On installation, don't get confused if the same name
5870 appears more than once in the list of library names.
5874 * config.sub: Accept m68060 and m5200 as CPU names.
5878 * configure: Use && rather than using -a in test, because odd
5879 strings can confuse test.
5880 * configure.in: Likewise.
5884 * ltconfig, ltmain.sh: Bring in Visual C++ support.
5888 * Makefile.in (boostrap2-lean, bootstrap3-lean,
5889 bootstrap4-lean): New targets.
5893 * mpw-* Delete. Not used.
5897 * COPYING.LIB: Update FSF address.
5901 * ltconfig, ltmain.sh: Update to libtool 1.2a.
5903 * Makefile.in (GASB_SUPPORT_DIRS): Remove intl; already included via
5908 * ltconfig, ltmain.sh: Avoid producing a version number if
5909 -version-info was not used.
5913 * configure.in: Add --with-newlib to CONFIG_ARGUMENTS if we are
5914 building with newlib.
5918 * Makefile.in (EXTRA_GCC_FLAGS): Remove backslash at end;
5919 Solaris `make' causes it to continue to next definition.
5923 * Makefile.in (install-gdbtk): Call this 'install-gdb' so that
5924 the right GUI libraries and files are installed along with GDB.
5928 * configure.in: Change alpha to alpha* in several places.
5932 * config.sub: Recognize sparc86x.
5936 * configure.in (--enable-target-optspace): Remove debug echo.
5940 * configure: Set CXXFLAGS from CXXFLAGS, not CFLAGS.
5944 * ltconfig: Update cygwin32 support.
5946 * Makefile.in (GAS_SUPPORT_DIRS): Add intl.
5947 (BINUTILS_SUPPORT_DIRS, GASB_SUPPORT_DIRS): Likewise.
5948 (GDB_SUPPORT_DIRS): Likewise.
5952 * configure.in (target_makefile_frag): If --enable-target-optspace,
5953 use -Os to compile target libraries rather than -O2. Default to
5954 using -Os for d10v and m32r if --{enable,disable}-target-optspace is
5956 * configure.in (target_cflags): Ditto for d30v.
5960 * Makefile.in (all-bfd): Depend on all-intl.
5961 (all-binutils): Likewise.
5962 (all-gas): Likewise.
5963 (all-gprof): Likewise.
5968 * configure.in (host_tools): Fix typo, lbtool -> libtool.
5972 * Makefile.in (all-bfd): Depend upon all-libiberty.
5974 * ltconfig, ltmain.sh: Bring in newer cygwin32 support.
5978 * Makefile.in: Add libstub.
5980 * configure.in: Ditto. Build libstub for targets that have cygmon
5985 * configure.in: Don't set PICFLAG on ix86-cygwin32.
5989 * configure.in: Recognise i[3456]96-*-sysv5* as a valid host, and
5990 use mh-sysv5 if specified. Support gprof on SCO Open Server.
5994 * configure: Define DEFAULT_M4 by searching PATH.
5995 * Makfile.in: Use DEFAULT_M4.
5999 * ltconfig: Add cygwin32 support.
6001 * Makefile.in, configure.in: Add libtool as a native only directory
6002 to configure and build.
6006 * Makefile.in (INSTALL_MODULES): Remove texinfo.
6010 * Makefile.in (EXTRA_GCC_FLAGS): XFOO lines shortened.
6014 * Makefile.in: add ash make rules
6015 * configure.in: add ash to native_only and host_tools lists
6019 * Makefile.in (all-gettext, all-intl): New targets.
6020 (ALL_MODULES): Added all-gettext, all-intl.
6021 (CROSS_CHECK_MODULES): Added check-gettext, check-intl.
6022 (INSTALL_MODULES): Added install-gettext, install-intl.
6023 (CLEAN_MODULES): Added clean-gettext, clean-intl.
6025 * configure.in (host_tools): Added gettext.
6026 (native_only): Likewise.
6027 (noconfigdirs) [various cases]: Likewise.
6028 (host_libs): Added intl.
6032 * configure: Do not disable building gdbtk for cygwin32 hosts.
6036 * configure.in: Add thumb-coff target.
6037 * config.sub: Add thumb-coff target.
6041 * Makefile.in: Revert yesterday's change.
6042 (all-target-winsup): all-target-librx stays out of here.
6046 * Makefile.in (TARGET_CONFIGDIRS, ALL_TARGET_MODULES,
6047 CONFIGURE_TARGET_MODULES, CHECK_TARGET_MODULES,
6048 INSTALL_TARGET_MODULES, CLEAN_TARGET_MODULES, all-target-winsup):
6049 Remove references to librx and libg++.
6053 * Makefile.in (BASE_FLAGS_TO_PASS): Pass $(lispdir) down to
6058 * Makefile.in (CC_FOR_TARGET): Use $(TARGET_SUBDIR) when passing -B
6059 for newlib directory.
6060 (CXX_FOR_TARGET): Likewise.
6064 * ltconfig: Update after libtool/ltconfig.in change for
6069 * ltconfig, ltmain.sh: Update to libtool 1.2.
6073 * Makefile.in (install-gcc): Don't specify LANGUAGES here.
6074 (install-gcc-cross): Instead, override LANGUAGES here.
6078 * Makefile.in ($(CONFIGURE_TARGET_MODULES)): Set CONFIG_SITE to a
6079 non-existent file since /dev/null loses with bash 2.0/autoconf 2.12.
6083 * configure.in: Add Thumb-pe target.
6087 * Makefile.in - changed sn targets to snavigator
6088 * configure.in - changed sn targets to snavigator
6092 * config-ml.in: After building symlink tree call make distclean
6093 if a Makefile got linked into ${ml_dir}/${ml_libdir}; this happens
6094 to be the case for libiberty.
6098 * configure: When making link, also check the current
6099 directory. The configure scripts may create one.
6103 * config.sub: Accept alphapca56 and alphaev6 properly.
6107 * configure.in: Revert 3 Jan change for powerpc-linux-gnulibc1.
6111 * config.sub (sco5): Fix typo.
6115 * Makefile.in (INSTALL_MODULES): Move install-tcl before
6117 (install-itcl): Remove dependency on install-tcl.
6121 * configure.in: Remove libgloss from noconfigdirs for MN10300.
6125 * configure.in: Don't build libgui for a cygwin32 target when not on
6130 * configure (redirect): Set to null, so default behavior of
6131 configure is now --verbose.
6135 * Makefile.in ($(CONFIGURE_TARGET_MODULES)): Run configure with
6136 CONFIG_SITE=/dev/null to forestall lossage with site configuration.
6140 * Makefile.in (BASE_FLAGS_TO_PASS, EXTRA_TARGET_FLAGS): Really add
6141 this change to sync Makefile.in with its ChangeLog entries.
6145 * ltmain.sh (mkdir): Check that the directory doesn't exist
6146 before we exit with error, so that we don't get races during
6151 * ltconfig, ltmain.sh: Update from libtool 1.0i.
6155 * Makefile.in (BASE_FLAGS_TO_PASS): Don't pass PICFLAG and
6157 (EXTRA_TARGET_FLAGS): Don't pass PICFLAG_FOR_TARGET.
6159 * configure: Emit a definition for the new macro enable_shared
6164 * configure.in (host_tools, native_only): Add libtool.
6168 * configure.in: add target-gperf to noconfigdirs for Cygwin32.
6169 Fix typo in ming config comment.
6173 * ltconfig, ltmain.sh: Update from libtool 1.0h.
6177 * config.sub: Add tic30 cases, and map c30 to tic30.
6181 * Makefile.in (TARGET_CONFIGDIRS): Add libf2c.
6182 (ALL_TARGET_MODULES, CONFIGURE_TARGET_MODULES): Similarly
6183 (CHECK_TARGET_MODULES, INSTALL_TARGET_MODULES): Similarly
6184 (CLEAN_TARGET_MODULES): Similarly
6185 (all-target-libf2c): Add dependences.
6186 * configure.in (target_libs): Add libf2c.
6190 * configure.in: Remove expect from noconfigdirs when target
6191 is cygwin32. OK to build expect and dejagnu with Canadian
6196 * configure.in: Do build expect, dejagnu, and cvssrc for a cygwin32
6199 * config.guess: Use ${UNAME_MACHINE} rather than i386 for cygwin32
6204 * Makefile.in (BASE_FLAGS_TO_PASS): Remove passing $(local_prefix)
6205 here as it is not defined in the toplevel Makefile.
6209 * configure (package_makefile_rules_frag): New variable, which names
6210 a file with generic rules, ...
6211 Change comment to mention we now have FIVE parts.
6212 * configure: Undo last change.
6216 * config.guess: More accurate determination of HP processor types.
6217 * config.sub: More accurate determination of HP processor types.
6221 * configure (package_makefile_frag): Move inserting the
6222 ${package_makefile_frag} to where it should be according
6227 * config.guess: Add support for Linux/ARM.
6231 * .cvsignore: Remove *-info and *-install since they match
6232 release-info and mpw-install, which we don't want to just ignore.
6236 * configure.in: Revert 3 Jan change for alpha-linux-gnulibc1.
6240 * Makefile.in (FLAGS_TO_PASS): Pass down gcc_include_dir and
6241 local_prefix to sub-make invocations.
6245 * configure.in: Check makefile fragments in the source
6250 * configure.in: Check whether host and target makefile
6251 fragments exist before adding them to *_makefile_frag.
6255 * configure.in (target_configdirs): Add cygmon for sparc64-elf.
6259 * configure.in: Make sure we only replace RPATH_ENVVAR on
6260 lines which begin with RPATH_ENVVAR, i.e. add "^" to the
6263 * Makefile.in (BASE_FLAGS_TO_PASS): Pass RRPATH_ENVVAR down
6268 * config-ml.in (multi-do): LDFLAGS must include multilib
6273 * config.guess: Recognize i[3456]-i586-UnixWare7-sysv5.
6277 * config.sub: Add mingw32 support.
6278 * configure.in: Likewise.
6282 * configure.in: Finalize support for {alpha|powerpc}*-*-linux-gnulibc1
6286 * Makefile.in (INSTALL_TARGET): Do install-gcc first.
6287 * configure (gxx_include_dir): Provide a definition for subdirs
6288 which do not use autoconf.
6292 * config.guess: Sync with egcs. Picks up new alpha support,
6293 BeOS & some additional linux support.
6297 * config.guess: HP 9000/803 is a PA1.1 machine.
6301 * configure.in: It's alpha*-...
6305 * configure.in (host_makefile_frag, target_makefile_frag):
6306 Handle multiple config files.
6307 (alpha-*-linux*): Treat alpha-*-linux* as alpha-*-linux* and
6316 * configure.in (d30v-*-*): Allow configuring of libide, vmake, etc.
6320 * Makefile.in: Add libgui directory.
6321 (GDB_TK): Add all-libgui.
6322 * configure.in: Add libgui directory.
6323 * configure: Add all-libgui to GDB_TK.
6327 * config-ml.in (multidirs): Add m32r to multilib list.
6331 * Makefile.in (all-target-gperf): Change dependency to
6332 all-target-libstdc++.
6336 * config.guess: Add BeOS support.
6340 Source directory cvs renamed to cvssrc:
6341 * configure.in (host_tools): Change cvs to cvssrc.
6342 (native_only): Likewise.
6343 (noconfigdirs) [various cases]: Likewise.
6344 * Makefile.in (ALL_MODULES): Change all-cvs to all-cvssrc.
6345 (CROSS_CHECK_MODULES): Change check-cvs to check-cvssrc.
6346 (INSTALL_MODULES): Change install-cvs to install-cvssrc.
6347 (CLEAN_MODULES): Change clean-cvs to clean-cvssrc.
6348 (all-cvssrc): Rename target from all-cvs.
6352 * configure (gxx_include_dir): Fix thinko.
6356 * Makefile.in (INSTALL_TARGET_CROSS): Define.
6357 (install-cross, install-gcc-cross): New targets.
6361 * configure.in (noconfigdirs): Add support for Thumb target.
6363 * config.sub (maybe_os): Add support for Thumb target.
6367 * Makefile.in: Add rules for cygmon.
6369 * configure.in: Build cygmon for sparc-elf and sparclite-aout.
6373 * Makefile.in (INSTALL_TARGET): Do install-gcc first.
6374 * configure (gxx_include_dir): Provide a definition for subdirs
6375 which do not use autoconf.
6379 * Makefile.in, configure, configure.in, ChangeLog: merge with foundry's
6385 * config.guess (powerpc*-*-linux): Handle glibc2 beta release
6386 found on RedHat Linux systems.
6390 * config.guess (alpha stuff): Merge with FSF to avoid incorrect
6395 * configure.in (i[3456]86-ncr-sysv4.3*): Tweak.
6399 * ltmain.sh: If mkdir fails, check whether the directory was created
6400 anyhow by some other process.
6404 * configure.in (d30v-*-*): Configure all directories.
6408 * configure.in (d30v-*-*): Configure newlib, libiberty directories
6413 * configure.in (d30v-*-*): Configure target-libgloss on the D30V.
6417 * include/libiberty.h: Add extern "C" { so it can be used with C++
6419 * include/remote-sim.h: Add extern "C" { so it can be used with C++
6424 * configure.in (d30v-*-*): Configure GCC now.
6428 * configure.in: Remove a "second pass" of tweaking noconfigdirs,
6429 is no longer needed.
6433 * Makefile.in: check-target-libio depends on all-target-libstdc++.
6437 * Makefile.in (bootstrap-lean): Combined with `normal' bootstrap
6438 targets using "$@" to provide support for similar but not identical
6439 targets without having to duplicate code.
6443 * makefile.vms: Fix to work with DEC C.
6447 * config.sub: Add mips-tx39-elf to marketing names.
6451 * ltmain.sh: Handle symlinks in generated script.
6455 * configure: Handle autoconf style directory options: --bindir,
6456 --datadir, --includedir, --infodir, --libdir, --libexecdir,
6457 --mandir, --oldincludedir, --sbindir, --sharedstatedir,
6459 * Makefile.in (sbindir, libexecdir, sysconfdir): New variables.
6460 (sharedstatedir, localstatedir, oldincludedir): New variables.
6461 (BASE_FLAGS_TO_PASS): Pass down bindir, datadir, includedir,
6462 infodir, libdir, libexecdir, localstatedir, mandir, oldincludedir,
6463 sbindir, sharedstatedir, and sysconfdir.
6467 * Makefile.in (bootstrap-lean): New target.
6471 * configure.in (d30v): Remove tcl, tk, expect, gdb, itcl, tix, db,
6472 sn, and gnuserv from noconfigdirs.
6476 * ltmain.sh: Tweak shell pattern to avoid bug in NetBSD /bin/sh.
6480 * Makefile.in (cross): New target.
6485 * Makefile.in (bootstrap2, bootstrap3): New targets.
6486 (all-bootstrap): Remove outdated and confusing target.
6487 (bootstrap, bootstrap2, bootstrap3): Don't pass BOOT_CFLAGS down.
6491 * configure (tooldir): enable_gdbtk=YES for cygwin32, NO for
6492 windows. Consistent with gdb/configure.
6496 * configure.in: Name Linux target fragment.
6498 * configure: Rewrite so that project Makefile fragment is inserted
6499 first and appears last in the resulting Makefile.
6503 * Makefile.in (install-itcl): Install tcl first.
6507 * configure.in: remove bison from noconfigdirs for Cygwin32 host
6511 * Makefile.in (local-distclean): Also remove mh-frag mt-frag.
6513 * configure.in (skipdirs): Add target-librx for Linux.
6514 (alpha-*-linux*): Use config/mh-elfalphapic and config/mt-elfalphapic.
6518 * Makefile.in (bootstrap): New target.
6522 * config.sub: Accept 'amigados' for backward compatability.
6526 * config.guess: Merge with FSF.
6530 * config.sub: Change 'amigados' to 'amigaos' to match current usage.
6534 * config.sub: Add "marketing-names" patch.
6538 * configure.in (*-*-rtems*): Do not build libgloss for rtems.
6542 * config.sub: Handle v850-elf.
6546 * .cvsignore (*-install): Remove.
6550 * ltconfig: Set CONFIG_SHELL in libtool.
6551 * ltmain.sh: Use CONFIG_SHELL instead of /bin/sh
6555 * configure.in (target_subdir): Set to libraries if enable_multilib.
6559 * config.guess: Update from gcc directory.
6563 * Makefile.in (all-sim): Depends on all-readline.
6567 * Makefile.in (BISON, YACC): Use $$s.
6568 (all-bison): Depend on all-texinfo.
6572 * Makefile.in (BISON): Add -L flag.
6577 * configure.in (noconfigdirs): Add support for v850e target.
6579 * config.sub (maybe_os): Add support for v850e target.
6583 * configure.in (noconfigdirs): Add support for v850ea target.
6585 * config.sub (maybe_os): Add support for v850ea target.
6589 * config.sub: Add mipstx39. Delete r3900.
6593 * Makefile.in (all-autoconf): Depends on all-texinfo.
6597 * config-ml.in ({powerpc,rs6000}*-*-*): Update to current AIX and
6602 * configure: Get CFLAGS and CXXFLAGS from Makefile, if possible.
6604 * configure: When handling a Canadian Cross, handle YACC as well as
6605 BISON. Just set BISON to bison. When setting YACC, prefer bison.
6606 * Makefile.in (all-bison): Depend upon all-texinfo.
6610 * Makefile.in (BISON): bison, not byacc or bison -y.
6611 (YACC): bison -y or byacc or yacc.
6612 (various): Add *-bison as appropriate.
6613 (taz): No need to mess with BISON anymore.
6617 * configure: If OSTYPE matches *win32*, try to find a good value for
6622 * Makefile.in (taz): Get the version number from AM_INIT_AUTOMAKE in
6623 configure.in if it is present.
6627 * Makefile.in (LD_FOR_TARGET): Change ld.new to ld-new.
6631 * config.sub: Recognize `arc' cpu.
6632 * configure.in: Likewise.
6633 * config-ml.in: Likewise.
6637 * Makefile.in ($(INSTALL_X11_MODULES)): Depend upon installdirs.
6641 * configure: Changed sed delimiter from ':' to '|' when
6642 attempting to substitute ${config_shell} for SHELL. On
6643 NT ${config_shell} may contain a ':' in it.
6647 * Makefile.in (EXTRA_GCC_FLAGS): Fix for non-bash shells.
6651 * Makefile.in (AS_FOR_TARGET): Change as.new to as-new.
6655 * Makefile.in (NM_FOR_TARGET): Change nm.new to nm-new.
6657 * ylwrap: If the program is a relative path, force it to be
6662 * configure (tooldir): Set BISON to `bison -y' and not just bison.
6666 * Makefile.in (CC_FOR_TARGET): When winsup/Makefile present,
6667 correctly specify the target build directory $(TARGET_SUBDIR)/winsup
6672 * Makefile.in (EXTRA_GCC_FLAGS): Fix handling of macros with values
6673 separated by spaces.
6678 * Makefile.in (DEVO_SUPPORT): Add ylwrap.
6680 * ltmain.sh: Handle /bin/sh at start of install program.
6682 * Makefile.in (DEVO_SUPPORT): Add ltconfig, ltmain.sh, and missing.
6684 * ltconfig, ltmain.sh: New files, from libtool 1.0.
6685 * missing: New file, from automake 1.2.
6689 * Makefile.in: Treat tix like tk, putting it in X11_MODULES. Add
6690 check-tk to CHECK_X11_MODULES.
6694 * config.sub: Merge with FSF.
6698 * config.guess: Merge with FSF.
6702 * configure: Treat msdosdjgpp like go32.
6703 * configure.in: Likewise. Don't remove gprof for go32.
6705 * configure: Change Makefile.tem2 to Makefile.tm2.
6709 * configure.in (noconfigdirs): For alpha-dec-osf*, don't ignore grep.
6713 * install-sh (chmodcmd): Set to null if the DST directory already
6714 exists. Same as Nov 11th change.
6718 * configure (GDB_TK): Needs itcl and tix.
6722 * config.guess: Update from FSF.
6726 * Makefile.in (GDB_TK): Depend on itcl and tix.
6730 * Makefile.in (INSTALL_PROGRAM_ARGS): New variable.
6731 (INSTALL_PROGRAM): Use $(INSTALL_PROGRAM_ARGS).
6732 (INSTALL_SCRIPT): New variable.
6733 (BASE_FLAGS_TO_PASS): Pass down INSTALL_SCRIPT.
6734 * configure.in: If host is *-*-cygwin32*, set INSTALL_PROGRAM_ARGS
6736 * install-sh: Add support for -x option.
6740 * configure.in, Makefile.in: Treat tix like itcl.
6744 * Makefile.in (WINDRES): New variable.
6745 (WINDRES_FOR_TARGET): New variable.
6746 (BASE_FLAGS_TO_PASS): Add WINDRES_FOR_TARGET.
6747 (EXTRA_HOST_FLAGS): Add WINDRES.
6748 (EXTRA_TARGET_FLAGS): Add WINDRES.
6749 (EXTRA_GCC_FLAGS): Add WINDRES.
6750 ($(DO_X)): Pass down WINDRES.
6751 ($(CONFIGURE_TARGET_MODULES)): Set WINDRES when configuring.
6752 * configure: Treat WINDRES like DLLTOOL, and WINDRES_FOR_TARGET like
6757 * configure.in: configure sim before gdb for win32-x-ppc
6761 Move gperf into the toplevel, from libg++.
6762 * configure.in (target_tools): Add target-gperf.
6763 (native_only): Add target-gperf.
6764 * Makefile.in (all-target-gperf): New target, depend on
6766 (configure-target-gperf): Empty rule.
6767 (ALL_TARGET_MODULES): Add all-target-gperf.
6768 (CONFIGURE_TARGET_MODULES): Add configure-target-gperf.
6769 (CHECK_TARGET_MODULES): Add check-target-gperf.
6770 (INSTALL_TARGET_MODULES): Add install-target-gperf.
6771 (CLEAN_TARGET_MODULES): Add clean-target-gperf.
6775 * config.sub (mn10200): Recognize new basic machine.
6779 * configure.in: Don't set ENABLE_MULTILIB, so we'll be passing
6780 --enable-multilib down to subdirs; setting TARGET_SUBDIR was enough.
6784 * configure.in: If we're building mips-sgi-irix6* native, turn on
6785 ENABLE_MULTILIB and set TARGET_SUBDIR.
6789 * Makefile.in (all-sn): Depend on all-grep.
6793 * configure.in: Use mh-ppcpic and mt-ppcpic for powerpc*-* targets.
6795 * configure: Set CFLAGS and CXXFLAGS, and substitute them into
6797 * Makefile.in: Add comment for CFLAGS and CXXFLAGS.
6799 * Makefile.in (DISTBISONFILES): Remove.
6800 (taz): Don't futz with DISTBISONFILES. Change BISON to use
6803 * configure.in: Build itl, db, sn, etc., when building for native
6806 * Makefile.in (LD): New variable.
6807 (EXTRA_HOST_FLAGS): Pass down LD.
6808 ($(DO_X)): Likewise.
6812 * Makefile.in (INSTALL): Use $(SHELL) when executing install-sh.
6816 * configure.in (targargs): Strip out any supplied --build argument
6817 before adding our own. Always add --build.
6821 * configure.in (targargs): Pass --build if we're doing
6826 * configure: Use '|' instead of ":" as the separator in
6827 sed. Otherwise sed chokes on NT path names with drive
6828 designators. Also look for "?:*" as the leading characters in an
6833 * config.sub: Support for r3900.
6837 * configure.in: Use install-sh, not install.sh.
6841 * Makefile.in (taz): Improve check for BISON so it doesn't try to
6846 * Makefile.in (INSTALL_MODULES): Put install-opcodes before
6851 * Makefile.in: Add automake targets.
6852 * configure.in (host_tools): Add automake.
6856 * configure: Default CXX to c++, not gcc.
6857 * Makefile.in (CXX): Set to c++, not gcc.
6858 (CXX_FOR_TARGET): When cross, transform c++, not gcc.
6862 * install-sh: try appending a .exe if source file doesn't
6867 * configure.in: Turn on multilib by default.
6868 (cross_only): Remove target-libiberty.
6870 * Makefile.in (all-gcc): Don't depend on libiberty.
6874 * config.guess: improve algorithm for recognizing Gnu Hurd x86.
6878 * Makefile.in (DEVO_SUPPORT): Add mpw-install.
6879 (DISTBISONFILES): Add ld/Makefile.in
6883 * configure.in: if target is cygwin32 but host isn't cygwin32,
6884 don't configure gdb tcl tk expect, not just gdb.
6888 * configure.in: Added gnuserv everywhere sn appears.
6890 * Makefile.in (ALL_MODULES): Added all-gnuserv.
6891 (CROSS_CHECK_MODULES): Added check-gnuserv.
6892 (INSTALL_MODULES): Added install-gnuserv.
6893 (CLEAN_MODULES): Added clean-gnuserv.
6894 (all-gnuserv): New target.
6898 * config.guess: Fixes for MIPS OpenBSD systems.
6902 * Makefile.in (INSTALL_XFORM): Remove.
6903 (BASE_FLAGS_TO_PASS): Remove INSTALL_XFORM.
6905 * mkinstalldirs: New file, copied from automake.
6906 * Makefile.in (installdirs): Rename from install-dirs. Use
6907 mkinstalldirs. Change all users.
6908 (DEVO_SUPPORT): Add mkinstalldirs.
6912 * install-sh: Rename from install.sh.
6913 * Makefile.in (INSTALL): Change install.sh to install-sh.
6914 (DEVO_SUPPORT): Likewise.
6916 * configure: Use ${config_shell} with ${moveifchange}. From Thomas
6921 * config.guess: Recognize OpenBSD systems correctly.
6925 * README, Makefile.in (ETC_SUPPORT): Remove references to
6926 cfg-paper*, configure.{texi,man,info*}._
6930 * Makefile.in (all.normal): Ensure that gcc is built after all
6931 the x11 - ie gdb - targets.
6935 * makefile.vms: Don't run conf-a-gas.
6939 * configure.in (hppa1.1-*-rtems*): New target, like hppa-*-*elf*.
6943 * configure.in: Remove noconfigdirs case since gdb also
6944 configures and builds for tic80-coff.
6948 * configure: Set cache_file to config.cache.
6949 * Makefile.in (local-distclean): Remove config.cache.
6953 * COPYING: Update FSF address.
6957 * configure.in (tic80-*-*): Remove G++ libraries and libgloss from
6962 * Makefile.in (install-dirs): Don't crash if prefix, and hence
6967 * config.sub: Tweak mn10300 entry.
6971 * configure.in (host_tools): Put sim before gdb, so gdb's
6972 configure.tgt can determine if the simulator was configured.
6976 * config.sub: Move BeOS $os case to be with other Cygnus
6981 * config.sub: Remove misplaced comment that broke Linux.
6985 * config.sub: Add BeOS support.
6989 * Makefile.in (CHECK_X11_MODULES): Don't run check-tk.
6993 * configure.in (noconfigdirs): Remove tcl and tk from
6994 noconfigdirs for cygwin32 builds.
6998 * configure.in (tic80-*-*): Remove ld from noconfigdirs.
7002 * Makefile.in (GAS_SUPPORT_DIRS, BINUTILS_SUPPORT_DIRS): Remove
7003 make-all.com, use makefile.vms instead.
7007 * config.sub: Accept -lnews*.
7011 * configure.in (noconfigdirs): Disable target-newlib,
7012 target-examples and target-libiberty for d30v.
7016 * configure.in (noconfigdirs): Enable ld for d30v.
7020 * configure.in (tic80-*-*): Build compiler.
7024 * configure.in (d30v-*): Remove sim directory from list of
7025 unsupported d30v directories
7029 * config.sub, configure.in: Add d30v target cpu.
7033 * makefile.vms: New file.
7034 * make-all.com: Remove.
7038 * Makefile.in (EXTRA_GCC_FLAGS): Add LIBGCC2_DEBUG_CFLAGS.
7042 * Makefile.in (all-itcl): The rule is all-itcl, not all-tcl.
7046 * Makefile.in (ALL_MODULES): Added all-db.
7047 (CROSS_CHECK_MODULES): Addec check-db.
7048 (INSTALL_MODULES): Added install-db.
7049 (CLEAN_MODULES): Added clean-db.
7053 * config.guess: Merge with latest FSF sources.
7057 * Makefile.in (ALL_MODULES): Added all-itcl.
7058 (CROSS_CHECK_MODULES): Added check-itcl.
7059 (INSTALL_MODULES): Added install-itcl.
7060 (CLEAN_MODULES): Added clean-itcl.
7064 * configure.in: build gdb for mn10200
7068 * Makefile.in (all-target-winsup): Depend on all-target-libio.
7072 * configure.in (tic80-*-*): Turn off most targets right now.
7076 * Makefile.in (MAKEINFO): Check for the existence of the Makefile,
7077 rather than the makeinfo program.
7078 (do-info): Depend upon all-texinfo.
7082 * configure.in: Remove uses of config/mh-linux.
7084 * config.sub, config.guess: Merge with latest FSF sources.
7088 * config.sub (case $basic_machine): Add tic80 entries.
7092 * config.sub, config.guess: Merge with latest FSF sources.
7096 * mpw-build.in: Build ld before gcc, use NewFolderRecursive.
7097 * mpw-config.in: Test for NewFolderRecursive.
7098 * mpw-install: Use symbolic name for startup filename.
7099 * mpw-README: Add various additional details.
7103 * configure.in (mips*-sgi-irix6*): Remove binutils from noconfigdirs.
7107 * configure.in: Do build gcc and the target libraries for
7112 * configure.in: don't avoid building gdb for mn10300 any more
7113 * Makefile.in: double-quote GCC_FOR_TARGET line in EXTRA_GCC_FLAGS
7114 instead of single-quoting it.
7118 * configure.in: Don't use --with-stabs on IRIX 6.
7122 * configure.in (m32r): Build gdb, libg++ now.
7126 * configure.in (mips*-sgi-irix6*): Remove gdb and related
7127 directories from noconfigdirs.
7131 * config.sub (basic_machine): added mips16 configuration
7135 * config.sub: Handle d10v-unknown.
7139 * config.sub: Handle v850-unknown.
7143 * Makefile.in: add findutils
7144 * configure.in: add findutils to list of host_tools
7148 * config.sub: Handle mn10200 and mn10300.
7152 * configure.in (d10v-*): Do not build librx.
7156 * configure.in (mn10300): Build everything except gdb & libgloss.
7160 * config.guess: Patch for Dansk Data Elektronik servers,
7163 For ncr, use /bin/uname rather than uname, since GNU uname does not
7166 Patch for MIPS R4000 running System V,
7169 Fix thinko for nextstep.
7174 * config.guess: Guess mips-dec-mach_bsd4.3.
7177 * config.guess (i?86-ncr-sysv*): Emit just enough of the minor
7179 * config.guess (mips-mips-riscos*): Emit just enough of the
7183 * config.guess (sparc-auspex-sunos*): Added.
7184 (f300-fujitsu-*): Added.
7187 * config.guess: Recognize a Tadpole as a sparc.
7191 * config.guess: Don't assume that NextStep version is either 2 or
7192 3. NextStep 4 (aka OpenStep 4) has come out now.
7196 * config.guess: Support Cray T90 that reports itself as "CRAY TS".
7201 * config.sub: Contributions from bug-gnu-utils to:
7202 Support plain "hppa" (no version given) architecture, reported by
7204 OpenBSD like NetBSD.
7205 LynxOs is not a hardware supplier.
7207 * config.guess: Contributions from bug-gnu-utils to add support for:
7208 OpenBSD like NetBSD.
7210 More Pyramid systems.
7211 i[n>4]86 Intel chips.
7212 M680[n>4]0 Motorola chips.
7213 Use unknown instead of lynx for hardware manufacturer.
7217 * install.sh (chmodcmd): Set to null if the DST directory already
7222 * configure.in (powerpc*-{eabi,elf,linux,rtem,sysv,solaris}*): Do
7223 not use mt-ppc target Makefile fragment any more.
7227 * configure.in (*-*-windows): Exclude everything but those dirs
7228 needed to build windows.
7232 * Makefile.in (all-target-winsup): Depend on all-target-librx.
7236 * configure.in: Exclude mmalloc from i386-windows.
7240 * Undo my previous change.
7244 * Makefile.in (EXTRA_GCC_FLAGS): Pass down GCC_FOR_TARGET
7246 (MAKEOVERRIDES): Define (revert this part of October 18 change).
7250 * Makefile.in (FLAGS_TO_PASS): Add $(HOST_FLAGS) to allow the
7251 host to add it's own flags.
7255 * configure: Handle GCC_FOR_TARGET like CC_FOR_TARGET.
7259 * Makefile.in (CC_FOR_TARGET): Check for xgcc, not Makefile.
7260 (CXX_FOR_TARGET): Likewise.
7261 (GCC_FOR_TARGET): Define.
7262 (BASE_FLAGS_TO_PASS): Remove GCC_FOR_TARGET.
7263 (EXTRA_GCC_FLAGS): Define GCC_FOR_TARGET based on whether
7264 CC_FOR_TARGET was specified on the command line.
7265 (MAKEOVERRIDES): Don't define.
7269 * configure.in (m32r): Fix spelling of libg++ libs.
7273 * config.sub (-apple*): Remove, now redundant.
7277 * configure: Don't get confused by CPU-VENDOR-linux-gnu.
7279 * configure: Rework yesterday's sed script patch.
7281 * config.sub: Merge with FSF.
7285 * config.guess: Merge from FSF.
7288 * config.guess: Use pc instead of unknown, for pc clone systems.
7289 Change linux to linux-gnu.
7292 * config.guess: Avoid non-portable tr syntax.
7296 * test-build.mk (HOLES): Add "xargs" for gdb.
7298 * configure: Avoid hpux10.20 sed bug.
7302 * configure.in: Add support for windows host
7303 (that is a build done under the Microsoft build environment).
7307 * Makefile.in: Replace all uses of srcroot with s, to shrink
7308 command line lengths.
7311 * configure.in: If configuring for newlib, pass --with-newlib to
7313 * Makefile.in (CC_FOR_TARGET): If winsup/Makefile exists, pass a
7314 -Bnewlib/ and -Lwinsup to gcc.
7315 (CXX_FOR_TARGET): Likewise.
7319 * Makefile.in (ETC_SUPPORT): Add configure.
7323 * configure.in: Use config/mh-dgux386 for i[345]86-dg-dgux
7324 host configuration file.
7328 * configure.in: Break mn10x00 support into separate
7329 mn10200 and mn10300 configurations.
7330 * config.sub: Likewise.
7334 * configure.in: Add lots of stuff to noconfigdirs for
7335 the mn10x00 targets.
7337 * config.sub, configure.in: Add mn10x00 support.
7341 * make-all.com: Call conf-a-gas, not config-a-gas.
7345 * configure.in (noconfigdirs): Don't build libgloss for arm-coff
7350 * mpw-README: Add much more detail for native PowerMac.
7351 * mpw-install: New file.
7352 * mpw-configure: Add --norecursion and --help options.
7353 * mpw-config.in: Translate readme and install files when
7355 * mpw-build.in: Don't always depend on byacc and flex.
7356 (install-only-top): New action.
7360 * configure.in: You can now configure GDB for the v850.
7364 * configure.in (noconfigdirs): Don't configure any C++ dirs
7369 * config.sub: Recognize mips64vr5000.
7373 * configure.in: Use a single line for host_tools and native_only.
7377 * config.sub, configure.in: Add entries for m32r.
7381 * Makefile.in (inet-install): Don't run install-gzip.
7385 * configure.in: Don't config lots of things for *-*-windows*.
7389 * mpw-config.in: Test for mpw-true, true, and null-command scripts.
7390 (host_libs, host_tools): Copy from configure.in.
7391 * mpw-configure: Don't complain about directories not found.
7395 * configure.in (i[345]86): Recognize i686 for pentium pro.
7396 (i[3456]86-*-dgux*): Use config/mh-sysv for the host configuration
7399 * config.guess (i[345]86): Ditto.
7403 * configure.in (noconfigdirs): Removed gdb for D10V.
7407 * configure.in: Remove ld, target-libio, target-libg++, and
7408 target-libstdc++ from noconfigdirs.
7412 * configure: Fix three locations where shell scripts were
7413 being run directly rather than with config_shell.
7417 * configure.in (v850-*-*): Set up initial $noconfigdirs.
7418 * config.sub (basic_machine): Recognize v850.
7422 * mpw-configure: Handle multiple enable/disable options and
7423 pass them down recursively, handle -c and -s flags appropriately
7424 depending on choice of compiler, add escape mechanism for
7425 quoted arguments to gC.
7429 * configure.in (powerpc*-*-*): For eabi, system V.4, Linux, and
7430 solaris targets, use config/mt-ppc to set C{,XX}FLAGS_FOR_TARGETS
7431 so that -mrelocatable-lib and -mno-eabi are used.
7433 * Makefile.in (CONFIGURE_TARGET_MODULES): If target compiler does
7434 not support --print-multi-lib, don't abort.
7438 * make-all.com: Run config-a-gas.
7439 * setup.com: Don't copy subdirectory files around.
7443 * configure.in (*-*-ose): Remove exclusion of libgloss for this
7444 target, it now compiles correctly.
7448 * mpw-config.in: Generate Mac include for elf/dwarf2.h.
7452 * configure.in (d10v-*-*): Remove ld from $noconfigdirs.
7456 * configure.in (native_only): Add prms.
7460 * Makefile.in (GAS_SUPPORT_DIRS): Add make-all.com and setup.com.
7461 (BINUTILS_SUPPORT_DIRS): Likewise.
7465 * configure.in (d10v-*-*): Don't configure ld or gdb until the
7466 d10v support is added.
7470 * configure.in (d10v-*-*): New target.
7474 * config.guess (HP 9000/811): Recognize this as a PA1.1
7479 * Makefile.in (do-tar-gz): New target, split out from tail end of
7480 taz target. Run each command separately, don't use pipes.
7485 * mpw-configure: Look for g-mpw-make.sed in config/mpw.
7486 * mpw-build.in: No builds should depend on building byacc or flex,
7487 they are assumed to be installed already.
7491 * Makefile.in (CONFIGURE_TARGET_MODULES): Set r environment
7492 variable that CC_FOR_TARGET needs.
7496 * Makefile.in (CONFIGURE_TARGET_MODULES): Determine if the multlib
7497 options have changed since the last time the subdirectory was
7498 configured, and if it has, reconfigure.
7499 (CLEAN_TARGET_MODULES): Delete multilib.out and tmpmulti.out, which
7500 CONFIGURE_TARGET_MODULES uses to remember the old multilib options.
7504 * Makefile.in (ALL_MODULES,CROSS_CHECK_MODULES,INSTALL_MODULES,
7505 CLEAN_MODULES): Add bash.
7506 (all-bash): New target.
7510 * configure.in (mips-sgi-irix6*): Use mh-irix6 instead of mh-irix5.
7514 * config.sub (basic_machine): Recognize d10v as a valid processor.
7518 * mpw-configure: Add support for --bindir.
7519 * mpw-build.in: Use a GCC-specific build script for GCC actions.
7523 * configure.in: add bash, time, gawk to list of hosttools and things
7524 to only build for native toolchains
7528 * Makefile.in (docdir): Remove.
7532 * Makefile.in (datadir): Set to $(prefix)/share.
7536 * configure.in: build diff and patch for cygwin32-hosted
7541 * config.sub: Accept -rtems*.
7545 * configure.in: enable dosrel for cygwin32-hosted builds,
7546 remove diff from the list of things not buildable
7551 * Makefile.in (TARGET_SUBDIR): Move comment to previous line so we
7556 * configure.in (mips*-sgi-irix6*): Set noconfigdirs appropriately.
7560 * Makefile.in (taz): Handle case where tex3patch didn't even get
7561 checked out. Also, if it was found, put the symlink in a new util
7566 * config.guess (*:Linux:*:*): Add support for PowerPC Linux.
7570 * config.sub: Recognize -openvms.
7571 * configure.in (alpha*-*-*vms*): Set noconfigdirs.
7572 * make-all.com, setup.com: New files.
7576 * Makefile.in (taz): tex3patch moved to texinfo/util.
7580 * configure: enable_gdbtk=no for cygwin32-hosted toolchains
7581 * configure.in: remove make from disable-if-Can-Cross list
7582 enable gdb if ${host} and ${target} are cygwin32
7586 * config.guess (i?86-ncr-sysv*): Emit minor release numbers.
7587 Recognize the NCR 4850 machine and NCR Pentium-based platforms.
7591 * config.guess: Combine mips-mips-riscos cases, and use cpp to
7592 distinguish sysv/svr4/bsd variants.
7597 * configure.in: Added copyright notice.
7598 * move-if-change: Added copyright notice.
7602 * configure.in (powerpcle-*-solaris*): Until we get shared
7603 libraries working, don't build gdb, sim, make, tcl, tk, or
7608 * config.guess: Merge with FSF:
7611 * config.guess (*:Linux:*:*): Add guess for sparc-unknown-linux.
7614 * config.guess (AViiON:dgux:*:*): Fix typo in recognizing mc88110.
7617 * config.guess: Combine two OSF1 rules.
7619 * config.guess (dgux): Use /usr/bin/uname rather than uname,
7624 * Makefile.in (MAKEDIRS): Removed $(tooldir).
7628 * mpw-README: Document GCCIncludes.
7632 * configure.in (alpha-*-linux*): Set enable_shared to yes.
7636 * mpw-configure: Handle --enable-FOO and --disable-FOO.
7640 * configure.in (*-*-cygwin32): Configure make.
7644 * Makefile.in (inet-install): Quote value of INSTALL_MODULES.
7648 * Makefile.in (all-inet): Depend on all-perl.
7650 * Makefile.in (inet-install): New target.
7652 * Makefile.in (all-inet): Depend on all-tcl.
7653 (all-inet): Depend on all-send-pr.
7657 * configure.in (powerpcle-*-solaris*): Turn off tk and tcl
7662 * configure.in: Don't configure --with-gnu-ld on AIX.
7666 * configure.in (powerpcle-*-solaris*): Turn off gdb temporarily.
7670 * Makefile.in (ALL_MODULES): Added all-inet.
7671 (CROSS_CHECK_MODULES): Added check-inet.
7672 (INSTALL_MODULES): Added install-inet.
7673 (CLEAN_MODULES): Added clean-inet.
7674 (all-indent): New target.
7676 * configure.in (host_tools): Added inet.
7677 (native_only): Added inet.
7678 (noconfigdirs): Added inet.
7682 * configure.in: Don't configure libgloss if we are not configuring
7687 * configure.in: Don't configure libgloss for unsupported
7692 * Makefile.in (CLEAN_MODULES): Add clean-apache.
7696 * Makefile.in (ALL_MODULES): Include all-apache.
7697 (CROSS_CHECK_MODULES): Include check-apache.
7698 (INSTALL_MODULES): Include install-apache.
7699 (all-apache): New target.
7701 * configure.in: Added apache everywhere perl is seen.
7705 * Makefile.in: Add support for clean-{module} and
7706 clean-target-{module} rules.
7710 * configure.in (*-*-ose) do not build libgloss.
7714 * config.guess (prep*:SunOS:5.*:*): Turn into
7715 powerpele-unknown-solaris2.
7719 * configure.in: Permit --enable-shared to specify a list of
7724 * configure.in (host==solaris): Pass only the first word of $CC
7725 to /usr/bin/which when checking if we're using /usr/ccs/bin/cc.
7729 * Makefile.in (BASE_FLAGS_TO_PASS): pass down $(MAKE).
7733 * Makefile.in (ALL_MODULES): Include all-perl.
7734 (CROSS_CHECK_MODULES): Include check-perl.
7735 (INSTALL_MODULES): Include install-perl.
7736 (ALL_X11_MODULES): Include all-guile.
7737 (CHECK_X11_MODULES): Include check-guile.
7738 (INSTALL_X11_MODULES): Include install-guile.
7739 (all-perl): New target.
7740 (all-guile): New target.
7742 * configure.in (host_tools): Include perl and guile.
7743 (native_only): Include perl and guile.
7744 (noconfigdirs): Don't build guile and perl; no ports have been
7749 * configure (--enable-*): Handle quoted option lists such as
7750 --enable-sim-cflags='-g0 -O' better.
7754 * Makefile.in ({,inst}all-target): New rule so we can make and
7755 install all of the target directories easily.
7759 * configure.in: Add missing global flag in sed substitution when
7760 deleting `target-' from ${configdirs}.
7764 * Makefile.in (DO_X): Don't get confused if CC contains `=' in an
7767 * configure.in (mips*-nec-sysvr4*): Use a host_makefile_frag of
7770 * install.sh: Correct misspelling of transformbasename.
7772 * config.guess: Recognize mips-*-sysv*.
7776 * config.sub: Recognize mon960.
7780 * configure: Restore Canadian Cross handling of BISON and LEX,
7781 removed in Feb 20 change.
7786 Mention make install. Remove the old copyright date as well the
7787 clumsy and rather pointless copyright on the README file.
7791 * Makefile.in ($(CONFIGURE_TARGET_MODULES)): If there is a
7792 Makefile after running symlink-tree, then run `make distclean' to
7793 avoid clobbering any generated files in srcdir.
7797 * configure.in (m68k-*-netbsd*): Build everything now.
7801 * Makefile.in (taz): Fix quoting.
7805 * configure.in (sparclet-*-*): Build everything now.
7809 * configure.in (m68k-*-linux*): New host.
7813 * configure: Check for bison before byacc.
7817 * Makefile.in configure: Change the way LEX and BISON/YACC are
7818 set. configure now defines DEFAULT_LEX and DEFAULT_YACC by
7819 searching PATH. These are used as fallbacks by Makefile.in if
7820 flex/bison/byacc aren't in objdir.
7824 * Makefile.in: Make everything which depends upon all-bfd also
7825 depend upon all-opcodes, in case --with-commonbfdlib is used.
7829 * configure.in (host *-*-cygwin32): Don't build gdb if we are
7830 building NT native compilers on Unix.
7834 * configure.in: Don't get CC from the host Makefile fragment if we
7835 can find gcc in PATH, or if this is a Canadian Cross. Move the
7836 Solaris test for /usr/ucb/cc to the post target script, just after
7837 the compiler sanity test.
7841 * config.sub: Merge with FSF.
7845 * Makefile.in (RPATH_ENVVAR): New variable.
7846 (REALLY_SET_LIB_PATH): Use it.
7847 * configure.in: On HP/UX, set RPATH_ENVVAR to SHLIB_PATH.
7851 * config.sub, configure.in: Recognize sparclet cpu.
7855 * config.guess: Support m68k-cbm-sysv4.
7859 * config.guess (*:Linux:*:*): Guess m68k-unknown-linux and
7860 m68k-unknown-linuxaout from linker help string. Put quotes around
7865 * config.guess (powerpc-harris-powerunix): Add guess for port
7870 * config.guess (UNAME_VERSION): Recognize X4.x as an OSF version.
7874 * configure.in: If --enable-shared was used, set SET_LIB_PATH to
7875 $(REALLY_SET_LIB_PATH) in Makefile.
7876 * Makefile.in (SET_LIB_PATH): New variable.
7877 (REALLY_SET_LIB_PATH): New variable.
7878 ($(DO_X)): Use $(SET_LIB_PATH).
7879 (install.all, gcc-no-fixedincludes, $(ALL_MODULES)): Likewise.
7880 ($(NATIVE_CHECK_MODULES), $(CROSS_CHECK_MODULES)): Likewise.
7881 ($(INSTALL_MODULES), $(CONFIGURE_TARGET_MODULES)): Likewise.
7882 ($(ALL_TARGET_MODULES), $(CHECK_TARGET_MODULES)): Likewise.
7883 ($(INSTALL_TARGET_MODULES), $(ALL_X11_MODULES)): Likewise.
7884 ($(CHECK_X11_MODULES), $(INSTALL_X11_MODULES)): Likewise.
7885 (all-gcc, all-bootstrap, check-gcc, install-gcc): Likewise.
7886 (install-dosrel): Likewise.
7887 (all-opcodes): Depend upon all-libiberty.
7891 * config.guess (*:CYGWIN*): New
7895 * Makefile.in (all-target-winsup): All all-target-libiberty.
7899 * configure.in (noconfigdirs): Add missing # in front of comment.
7903 * configure.in: add second pass to things added to noconfigdirs
7904 so *-gm-magic can exclude libgloss properly.
7908 * mpw-configure (extralibs_name, rez_name): Set correctly
7909 for MWC68K compiler.
7911 * mpw-README: Add more info on the necessary build tools.
7915 * configure.in, config.sub: Recognize cygwin32.
7919 * config.guess, config.sub: Recognize A/UX.
7923 * config.sub: Merge with gcc/config.sub.
7927 * mpw-build.in (do-binutils): Add build of stamps.
7931 * config.sub: Add recognition for mips64vr4100*-* targets.
7935 * test-build.mk: Add checking of `hpux9' rather than just `hpux'.
7936 Add creation of gconfigargs with `--enable-shared' turned on.
7937 ($(host)-stamp-stage2-configured): Pass $(gconfigargs).
7938 ($(host)-stamp-stage3-configured): Likewise.
7939 (HOLES): Add chatr and ldd.
7940 (i386-ncr-sysv4.3*): Add use of /usr/ccs/bin in the PATH and HOLE_DIRS.
7944 * configure: Pass --nfp to recursive configures.
7948 * Makefile.in (DLLTOOL): New.
7949 (DLLTOOL_FOR_TARGET): New.
7950 (EXTRA_HOST_FLAGS): Pass down DLLTOOL.
7951 (EXTRA_TARGET_FLAGS): Ditto.
7952 (EXTRA_GCC_FLAGS): Ditto.
7953 (CONFIGURE_TARGET_MODULES): Ditto.
7955 * configure: Add DLLTOOL.
7960 * configure.in (i[345]86-*-sco3.2v5*): Use mh-sysv instead of
7961 mh-sco, since old workarounds no longer needed, and don't
7962 build ld, since libraries have weak symbols in COFF.
7966 * Makefile.in (CONFIGURE_TARGET_MODULES): Add missing ';'.
7970 * configure.in: Make sure that ${CC} can be used to compile an
7975 * Makefile.in (all-gdb): Depend on $(GDB_TK).
7976 * configure (GDB_TK): Set GDB_TK to either "all-tcl all-tk" or
7977 nothing depending on whether gdbtk is being built.
7981 * Makefile.in (newlib.tar.gz): Delete building of newlib's info files.
7985 * configure.in (noconfigdirs): Put ld or gas in this early, if the
7986 user specifically used --with-gnu-ld=no or --with-gnu-as=no.
7990 * config-ml.in: Add support for
7991 --disable-{softfloat,m68881,m68000,m68020} on m68*-*-*.
7992 Simplify setting of multidirs from --disable-foo.
7996 * Makefile.in (EXTRA_GCC_FLAGS): If any of the make variables
7997 LANGUAGES, BOOT_CFLAGS, STMP_FIXPROTO, LIMITS_H_TEST,
7998 LIBGCC1_TEST, LIBGCC2_CFLAGS, LIBGCC2_INCLUDES, and ENQUIRE are
7999 non-empty, pass them on to the GCC make.
8000 (all-bootstrap): New rule that is like all-gcc, except it executes
8001 the GCC bootstrap rule instead of the GCC all rule.
8005 * config-ml.in (ml_realsrcdir): New, to account for ${subdir}.
8009 * config.guess (AViiON:dgux:*:*): Update from FSF to add pentium
8014 * config.sub (i*86*) Change [345] to [3456]
8018 * configure.in (noconfigdirs): Add gas or ld if --with-gnu-as=no or
8023 * config-ml.in (rs6000*, powerpc*): Add switches to control which
8024 AIX multilibs get built.
8028 * configure.in (i386-win32): Don't build expect if we're not
8029 building the tcl subdir.
8033 * Makefile.in: (configure-target-examples, all-target-examples):
8034 New targets, configure and build example programs.
8038 * mpw-configure: If an mpw-config.in generated a file mk.sed,
8039 use it as input to sedit the generated MPW makefile.
8040 * mpw-README: Add a suggestion about Gestalt.h.
8044 * config.sub: Accept *-*-ieee*.
8048 * Makefile.in (local-distclean): Remove $(TARGET_SUBDIR). From
8053 * configure.in (host==powerpc-pe): Add many directories to noconfigdirs
8054 for powerpc-pe native.
8055 (target==i386-win32): add tcl, make to noconfigdirs if canadian cross.
8056 (target==powerpc-pe): duplicate i386-win32 entry.
8060 * configure.in (noconfigdirs): Exclude target-newlib for all versions
8061 of vxworks, not just vxworks5.1.
8065 * mpw-configure: Add support for exec-prefix.
8069 * config.guess: Recognize HP model 816 machines as having
8074 * configure: Ignore new autoconf configure options.
8078 * config.guess: Recognize Pentium under SCO.
8083 * configure.in (noconfigdirs): Disable target-libio on v810-*-*.
8087 * configure.in: Don't configure gas for alpha-dec-osf*.
8091 * configure.in: Default to --with-stabs for some targets for which
8092 it makes sense: mips*-*-*, alpha*-*-osf*, i[345]86*-*-sysv4* and
8093 i[345]86*-*-unixware*.
8097 * config-ml.in: Get list of multidirs using gcc --print-multi-lib
8098 rather than basing it on the target. Simplify handling of options
8099 controlling which directories to configure. Remove extraneous
8100 slash in multi-clean target.
8104 * config-ml.in: Prefix more variables with ml_ so they don't collide
8109 * configure: Don't turn -v into --v.
8113 * configure.in (targargs): Fix typo.
8115 * Makefile.in (DEVO_SUPPORT): Add symlink-tree.
8119 * configure.in: Strip --host and --target options from
8120 CONFIG_ARGUMENTS, and always configure for --host only. Add
8121 --with-cross-host option when building with a cross-compiler.
8122 * configure: Canonicalize the arguments put into config.status by
8123 always using `=' for an option with an argument. Pass a presumed
8124 --host or --target explicitly.
8128 * config.sub: Merge -macos*, -magic*, -pe*, and -win32 cases
8129 into general OS recognition case.
8133 * configure.in (target_configdirs): add target-winsup only
8134 for win32 target systems.
8138 * Makefile.in (all-target-libgloss): Depend upon
8139 configure-target-newlib, since when libgloss is built it looks to
8140 see if the newlib directory exists.
8144 * Makefile.in (DEVO_SUPPORT): Use config-ml.in instead of
8149 * configure: Handle LD and LD_FOR_TARGET when configuring a
8154 * configure.in (target_libs): add target-winsup.
8155 (target==i386-win32): add patch diff flex make to $noconfigdirs.
8156 (target==ppcle-pe): remove ld from $noconfigdirs.
8160 * Makefile.in (CONFIGURE_TARGET_MODULES): Pass --with-target-subdir.
8161 Preserve relative path names in $srcdir. Build symlink tree if
8162 configuring cross target dir and srcdir=. (= no VPATH support).
8163 (configure-target-libg++): Depend on configure-target-librx.
8164 * cfg-ml-com.in, cfg-ml-pos.in: Deleted.
8165 * config-ml.in: New file.
8166 * symlink-tree: New file.
8167 * configure: Ensure srcdir="." if that's what it is.
8171 * mpw-README: Clarify some phrasing, add notes about CodeWarrior
8172 includes and FLEX_SKELETON setting.
8173 * mpw-configure (--with-gnu-ld): New option, controls whether
8174 to use PPCLink or ld with PowerMac GCC.
8175 * mpw-build.in (all-grez, do-grez, install-grez): New targets.
8176 * mpw-config.in: Configure grez if targeting Mac.
8178 * config.sub: Accept pmac and pmac-mpw as names for PowerMacs,
8179 accept mpw and mac-mpw as names for m68k Macs, change macos7 to
8181 * configure.in: Configure grez resource compiler if targeting Mac.
8182 * Makefile.in (all-grez, install-grez): New targets.
8186 * configure: CXX defaults to gcc, not g++. If we find
8187 gcc in the path, set CC to gcc -O2.
8191 * configure: Default ${build} correctly. Avoid picking up extra
8192 spaces when reading CC and CXX from Makefile. When doing a
8193 Canadian Cross, use plausible default values for numerous
8195 * configure.in: When doing a Canadian Cross, don't try to
8196 configure tools whose configure script can't handle it.
8200 * cfg-ml-com.in (sh-*-*): Add m2 and ml/m2 to multidirs.
8204 * configure: Remove dubious bug reporting address.
8208 * Makefile.in ($(CONFIGURE_TARGET_MODULES)): If subdir has
8209 configure script, run that instead of this directory's configure.
8210 In either case, print a message that we're configuring the sub-dir.
8214 * configure.in: Before checking for the existence of various files,
8215 use sed to filter out "target-".
8219 * Makefile.in (DO_X): Split rule to decrease command line length
8221 (Philippe De Muyter).
8225 * Makefile.in (all-patch): depend on all-libiberty.
8229 * configure.in: If the only directory in target_configdirs which
8230 actually exists is libiberty, then set target_configdirs to empty,
8231 to avoid trying to build a target libiberty in a gas or gdb
8236 * configure.in (host_makefile_frag): Use m68k-sun-sunos* instead
8237 of m68k-sun-* when selecting mh-sun3 to avoid matching NetBSD/sun3
8242 * configure.in (copy_dirs): Use sys-include instead of include
8243 for --with-headers option.
8247 * Makefile.in, configure.in: Make winsup builds work with
8252 * configure.in: Build the linker on AIX.
8256 * Makefile.in (CC_FOR_TARGET, CXX_FOR_TARGET): Add $(TARGET_SUBDIR)
8261 * Makefile.in (all-gcc): Fix typo.
8265 * Makefile.in ($(CHECK_TARGET_MODULES)): Fix typo.
8269 * configure.in: Rename libFOO to target-libFOO, and xiberty
8270 to target-xiberty, to provide more flexibility.
8271 (target_subdir): Define. Create if cross.
8272 Set TARGET_SUBDIR in Makefile to ${target_subdir}.
8273 * Makefile.in: Rename all-libFOO -> all-target-libFOO, all-xiberty
8274 -> all-target-libiberty, configure-libFOO -> configure-target-libFOO,
8275 check-libFOO -> check-target-libFOO, etc.
8276 ($(DO_X)): Iterate over TARGET_CONFIGDIRS after SUBDIRS.
8277 ($(CONFIGURE_TARGET_MODULES), $(CHECK_TARGET_MODULES),
8278 $(ALL_TARGET_MODULES), $(INSTALL_TARGET_MODULES)): Update accordingly.
8279 (configure-target-XXX): Depend on $(ALL_GCC), not all-gcc, to
8280 allow ALL_GCC="" to only configure.
8281 (DEVO_SUPPORT): Add cfg-ml-com.in and cfg-ml-pos.in.
8282 (ETC_SUPPORT, ETC_SUPPORT_PFX): Merge; update 'taz' accordingly.
8283 (LIBGXX_SUPPORT_DIRS): Remove xiberty.
8287 * Makefile.in (taz): Build "info" in etc explicitly.
8291 * configure.in: Make sure that CC is undefined (as opposed to
8292 null) if toplevel/config/mh-{host} doesn't define it. Fixes a
8293 problem with autoconf trying to configure on a host without GCC.
8297 * mpw-configure: Set host alias from choice of host compiler,
8298 only use generic MPW Makefile sed if present, edit a file
8299 named "hacked_Makefile.in" instead of "Makefile.in" if present.
8300 * mpw-README: Add problem notes about CW6 and CW7.
8304 * Makefile.in (taz): Use ";" instead of ";;".
8308 * Makefile.in (taz): Grep for '^diststuff:' or '^info:' in
8309 sub-directory Makefiles, instead of using DISTSTUFFDIRS and
8311 (DISTSTUFFDIRS, DISTDOCDIRS): Removed - no longer used.
8312 (newlib.tar.gz): Don't pass DISTDOCDIRS to recursive make.
8316 * Makefile.in (DISTDOCDIRS): Remove ld gprof bnutils gas libg++ gdb
8317 and gnats, because they are now subsumed by DISTSTUFFDIRS.
8318 Move bfd to DISTSTUFFDIRS.
8322 * Makefile.in (X11_LIB): Removed.
8323 (X11_FLAGS_TO_PASS): pass only X11_EXTRA_CFLAGS and X11_EXTRA_LIBS.
8325 * configure.in (host_makefile_frag): mh-aix & mh-sun removed.
8329 * cfg-ml-com.in (powerpc*): Shorten some of the multilib directory
8334 * cfg-ml-com.in (powerpc*-eabi*): Add mcall-aixdesc varients.
8338 * configure.in (i[345]86-*-win32): Always build newlib.
8339 Don't configure cvs, autoconf or texinfo.
8340 * Makefile.in (LD_FOR_TARGET): New.
8341 (BASE_FLAGS_TO_PASS, EXTRA_TARGET_FLAGS, CONFIGURE_TARGET_MODULES):
8342 Pass down LD_FOR_TARGET.
8346 * winsup: New directory.
8347 * Makefile.in: Build winsup.
8348 * configure.in: Winsup is configured when target is win32.
8349 Can only build win32 target GDB when native.
8353 * config.guess: Recognize HP model 819 machines as having
8358 * configure: Fix sed loop which substitutes for CC and CXX to
8359 avoid bug found in various sed implementations.
8363 * cfg-ml-com.in (powerpc-*-eabisim): Delete separate rule for
8364 simulator. Use standard powerpc-*-eabi*.
8368 * configure.in: Stop putting gas and binutils in noconfigdirs for
8369 powerpc-*-aix* and rs6000-*-*.
8373 * cfg-ml-com.in (powerpc*-*-eabisim*): Add support for building
8374 -mcall-aixdesc libraries.
8380 * config.sub (arm | armel | armeb): Fix shell syntax.
8384 * cfg-ml-com.in ({powerpc,rs6000}-ibm-aix*): Add multilibs for
8385 -msoft-float and -mcpu=common support.
8386 (powerpc*-*-eabisim*): Add support for building -mcall-aix
8391 * configure.in: Allow configuration and build of emacs19 for the alpha.
8395 * configure.in (CC): Get ^CC, not just any old CC, from
8396 ${host_makefile_frag}.
8400 * configure.in (CC): Try to get CC from
8401 ${srcdir}/${host_makefile_frag}, not ${host_makefile_frag}.
8405 * Makefile.in (TARGET_CONFIGDIRS): configure targetdirs
8406 only if it exists in $(srcdir).
8410 * configure: If CC and CXX are not set in the environment, set
8411 them, based on either an existing Makefile or on searching for gcc
8412 in PATH. Substitute for CC and CXX in Makefile.
8413 * configure.in: Remove libm from target_libs. Separate
8414 target_configdirs from configdirs. If CC is not set in
8415 environment, try to get it from a host Makefile fragment. Rewrite
8416 changes of configdirs to use skipdirs instead. A few minor
8417 tweaks. Take directories out of target_configdirs as they are
8418 taken out of configdirs. Remove existing Makefile files from
8419 subdirectories. Substitute for TARGET_CONFIGDIRS and
8420 CONFIG_ARGUMENTS in Makefile.
8421 * Makefile.in (TARGET_CONFIGDIRS): New variable, automatically set
8423 (CONFIG_ARGUMENTS): Likewise.
8424 (CONFIGURE_TARGET_MODULES): New variable.
8425 ($(DO_X)): Loop over TARGET_CONFIGDIRS as well as SUBDIRS.
8426 ($(CONFIGURE_TARGET_MODULES)): New target.
8427 (configure-libg++, configure-libio): New targets.
8428 (all-libg++): Depend upon configure-libg++.
8429 (all-libio): Depend upon configure-libio.
8430 (configure-libgloss, all-libgloss): New targets.
8431 (configure-libstdc++): New target.
8432 (all-libstdc++): Depend upon configure-libstdc++.
8433 (configure-librx, all-librx): New targets.
8434 (configure-newlib): New target.
8435 (all-newlib): Depend upon configure-newlib
8436 (configure-xiberty): New target.
8437 (all-xiberty): Depend upon configure-xiberty.
8441 * configure.in (host i[345]86-*-win32): Expand the
8446 * mpw-configure: Fix sed command file name.
8450 * configure.in (host i[345]86-*-win32): Reduce the
8455 * configure.in: Don't configure ld and gdb for powerpc*-*-winnt*
8456 or powerpc*-*-pe*, since they are not yet supported.
8460 Add PowerMac support and many other enhancements.
8461 * mpw-configure: New option --cc to select compiler to use,
8462 paste options set according to --cc into the generated
8463 Makefile, generate the Makefile by sed'ing the Unix Makefile.in
8464 if mpw-make.sed is present.
8465 * mpw-config.in: Don't test for gC1, test for mpw-touch,
8466 add forward includes for PowerPC include files.
8467 * mpw-build.in: Build using Makefile.PPC if present.
8468 (do-byacc, etc): Remove separate version resource builds.
8469 (do-gas): Build "stamps" before "all".
8470 (do-gcc): Build "stamps-h" and "stamps-c" before "all".
8471 * mpw-README: Update to reflect --cc option, PowerMac support,
8472 and recently-reported compatibility problems.
8476 * cfg-ml-com.in (m68*-*-*): Only build multilibs for
8477 embedded m68k systems (-aout, -coff, -elf, -vxworks).
8478 (--with-multilib-top): Pass to recursive invocations.
8482 * configure.in (noconfigdirs): Disable libg++ and libstdc++ on
8487 * configure.in (noconfigdirs): Disable bfd, binutils, gas, gcc,
8488 gdb, ld and opcodes on v810-*-*.
8492 * Makefile.in (DO_X): Change do-realclean to do-maintainer-clean.
8493 (local-maintainer-clean): New target.
8494 (maintainer-clean): New target.
8495 (realclean): Just depend upon maintainer-clean.
8499 * configure.in (noconfigdirs): Disable gdb on m68k-*-netbsd*.
8503 * configure.in: Build ld in mips*-*-bsd* case.
8507 * config.sub: Accept -lites* OS. From Ian Dall.
8511 * config.sub: recognise mips64vr4300 and mips64vr4300el as valid
8516 * configure.in: treat i386-win32 canadian cross the same as
8517 i386-go32 canadian cross.
8521 * cfg-ml-com.in (powerpc*-*-eabisim): Add support for PowerPC
8522 running under the simulator to build a reduced set of libraries.
8523 (powerpc-*-eabiaix): Add fine grained multilib support added to
8524 other powerpc targets yesterday.
8528 * cfg-ml-com.in (powerpc*): Add support for -disable-biendian,
8529 -disable-softfloat, -disable-relocatable, -disable-aix, and
8530 -disable-sysv to control which multilib libraries get built.
8534 * configure: Add Makefile.tem to list of files to remove in trap
8539 * config.guess (*Linux*): Add missing "exit"s.
8540 Also, need specific check for alpha-unknown-linux (uses COFF).
8544 * config.guess: Merge with FSF:
8547 * config.guess (AIX4): More robust release numbering discovery.
8550 * config.guess (i386-sequent-ptx): Properly get version number.
8553 * config.guess (mips:*:4*:UMIPS): New case.
8557 * configure.in (i386-go32 host): Fix typo (deja-gnu -> dejagnu).
8558 (i386-win32 host): Likewise. Don't build readline.
8562 * Makefile.in (GDBTK_SUPPORT_DIRS): Define and pass as part of
8563 SUPPORT_FILES to submakes.
8567 * Makefile.in (GDB_SUPPORT_DIRS): Add utils.
8568 (DEVO_SUPPORT): Add mpw-README, mpw-build.in, mpw-config.h and
8573 * configure.in (appdirs): Use =, not ==, in test expression when
8574 trying to build the text to print in the warning message for
8579 * cfg-ml-com.in (z8k-*-coff): Add 'std' multilib build.
8583 * config.guess: Recognize lynx-2.3.
8587 * config.sub (z8ksim): Deleted
8588 (z8k-*-coff): New, this is the one true name of the target.
8592 * cfg-ml-pos.in (dotdot): Work around SunOS sed bug.
8596 * config.guess (*:Linux:*:*): First try asking the linker what the
8597 default object file format is (elf, aout, or coff). Then if this
8598 fails, try previous methods.
8602 * configure.in: Don't build newlib for *-*-vxworks5.1.
8606 * configure.in: Don't build newlib for a29k-*-vxworks5.1.
8607 * test-build.mk: Add setting of --with-headers for a29k-vxworks5.1.
8611 * cfg-ml-pos.in (MULTITOP): Trim excess trailing "/.".
8615 * cfg-ml-com.in: New file.
8616 * cfg-ml-pos.in: New file.
8620 * COPYING.NEWLIB: Add HP free copyright to list.
8624 * config.sub: Recognize -eabi* for the system, not just -eabi.
8628 * Makfile.in (DLLTOOL_FOR_TARGET): New name, pass it down.
8629 * config.sub, configure.in (win32): New target and host.
8633 * configure.in: Add i386-pe configuration.
8637 * mpw-build.in (install): Install GDB after LD.
8641 * mpw-config.in (elf/mips.h): Always forward-include, needed
8646 * testsuite: New directory for customer acceptance and whole tool
8651 * configure: If per-host line isn't found, but AC_OUTPUT is found
8652 and a configure script exists, run it instead.
8656 * config.guess: Update from FSF, for alpha-dec-winnt3.5 and Crays.
8660 * configure: Set build_{cpu,vendor,os,alias} to host values when
8661 --build isn't specified.
8665 * Makefile.in (PICFLAG, PICFLAG_FOR_TARGET): New macros.
8666 (FLAGS_TO_PASS): Pass them.
8667 (EXTRA_TARGET_FLAGS): Ditto.
8671 * Makefile.in (all-libg++): Depend on all-libstdc++.
8675 * configure.in (noconfigdirs): Enable all packages for
8676 i386-unknown-netbsd.
8680 * configure.in (noconfigdirs): Don't configure tk for i386-go32
8681 hosted builds (DOS builds)
8685 Changes for ARM based on patches from Richard Earnshaw:
8686 * config.sub: Handle armeb and armel.
8687 * configure.in: Omit arm linker only for riscix.
8691 * config.guess: Update from FSF.
8695 * config.sub: Recognize powerpcle as the little endian varient of
8696 the PowerPC. Recgonize ppc as a PowerPC variant, and ppcle as a
8697 powerpcle variant. Convert pentium into i586, not i486. Add p5
8698 alias for i586. Map new x86 variants p6, k5, nexgen into i586
8703 * configure.in (hppa*-*-lites*): Treat like hppa*-*-*elf*.
8707 * config.sub: Accept -lites* as a basic system type.
8711 * config.guess (*:Linux:*:*): Check for whether the pre-BFD linker is
8712 installed, and if so return linuxoldld as the system name.
8716 * config.guess: Add hppa1.1-hp-lites support.
8720 * configure.in: Don't build newlib for m68k-vxworks5.1.
8724 * configure.in (mips-sgi-irix6): Use mh-irix5.
8728 * Makefile.in (all-gcc): Depend on all-ld (for libgcc1-test).
8732 * test-build.mk: Enable building of shared libraries on IRIX 5 and
8733 OSF/1. Fix compiler flags.
8734 * build-all.mk: Support Linux and OSF/1 3.0. Fix compiler flags.
8738 * configure.in: Recognize --with-newlib.
8739 (sparc-*-sunos4*): Build sim, dejagnu, expect, tcl if cross target.
8743 * Makefile.in: move {all,check,install}-gdb from *_MODULES
8744 to *_X11_MODULES due to gdbtk needing X include files et al.
8748 Merge in support for Mac MPW as a host.
8749 (Old change descriptions retained for informational value.)
8751 * mpw-config.in: Add generic include forwards for cpu-specific
8752 include files in aout and elf directories.
8754 * mpw-configure: Added copyright.
8755 * mpw-config.in: Check for presence of required build tools.
8756 (target_libs): Add newlib.
8757 (target_tools): Add examples.
8758 (Read Me): Generate as "Read Me for MPW" instead.
8759 * mpw-build.in: Base sub-builds on all-foo instead of do-foo.
8760 (all-byacc, do-byacc, all-flex, do-flex, do-newlib): New actions.
8761 (do-gas, do-gcc, do-gdb, do-ld): Build Version.r first.
8763 * mpw-configure: Remove subdir-specific makefile hackery,
8764 delete mk.tmp after using it.
8766 * mpw-build.in (all): Display start and end times.
8768 * mpw-configure (host_canonical): Set.
8769 (target_cpu): Always add to makefiles.
8770 (ARCHDEFS, EMUL): Add to makefile only if nonempty.
8771 (TM_FILE, XM_FILE, NM_FILE): No longer add to makefile.
8772 (mpw-mh-mpw): Look for in srcdir and srcroot.
8773 Use sed instead of mpw-edit-prefix to edit prefix definitions.
8775 * mpw-build.in: (install-only): New target.
8777 * mpw-configure (host_alias, target_alias): Rename from hostalias
8778 and targetalias, add into generated Makefile.
8779 (mk.tmp): If present, add into generated Makefile.
8780 * mpw-build.in (all-gas): Build config.h first before gas proper.
8782 * mpw-configure (config.status): Write only if changed.
8783 * mpw-config.in (readline): Configure it (not built, just used for
8786 * mpw-config.in (elf/mips.h): Add a forward include.
8788 * mpw-config.in: Forward-include most .h files in include into
8790 (readline): Don't build.
8791 mpw-build.in (install): Install GDB.
8793 * mpw-configure (prefix, mpw_prefix): Handle it.
8794 * mpw-config.in (mmalloc, readline): Don't configure.
8795 * mpw-build.in (thisscript): Rename to ThisScript.
8796 Use mpw-build instead of BuildProgram everywhere.
8797 (mmalloc, readline): Don't build.
8798 * mpw-README: New file, basic documentation about the MPW port.
8800 * mpw-config.in: Use forward-include to create include files.
8802 * mpw-configure: Add more things to the top of each configured
8803 Makefile, including contents of config/mpw-mh-mpw.
8804 * mpw-config.in (extra-include): Create this directory and fill it
8805 with Posix-like include files when configuring.
8807 * config.sub (apple, mac, mpw): Add various aliases.
8809 * mpw-build.in: New file, top-level build script fragment for MPW.
8810 * mpw-configure: New file, configure script for MPW.
8811 * mpw-config.in: New file, config fragment for MPW.
8815 * configure.in (host_libs): Remove glob, since it is gone from the
8820 * Makefile.in: define empty GDB_NLM_DEPS var.
8822 * configure.in(target_makefile_frag): use config/mt-netware
8823 for netware targets.
8827 * config.sub: Merge in recent FSF changes. Remove linux special
8836 * build-all.mk: Use CC=cc -Xs on Solaris.
8840 * glob/*: Removed. Schauer's 24 Feb 1994 readline change made us
8842 * Makefile.in: Nuke all references to glob subdirectory.
8846 * configure.in: Fix --enable-shared logic in per-host.
8850 * configure.in (*-hp-hpux[78]*): Use mh-hpux8.
8854 * configure.in (noconfigdirs): Don't build gas on AIX, for
8855 powerpc*-*-aix* as well as for rs6000*-*-aix*.
8859 * configure: Fix --cache-file to work if the file argument is a
8864 * configure: If the --cache-file is used, pass it down to
8865 configure in subdirectories.
8869 * config.sub: add vxworks29k configuration.
8873 * Makefile.in (taz): Do "diststuff" part quietly.
8877 * config.sub: Mini-merge with gcc/config.sub.
8881 * config.guess (IRIX): Sed - to _.
8885 * Makefile.in (source-vault, binary-vault): New targets.
8889 * config.sub: Recognize -eabi as a basic system type.
8893 * configure.in (enable_shared stuff): Fix typo.
8897 * Makefile.in (BASE_FLAGS_TO_PASS): Fix typo in passing LIBCXXFLAGS*.
8901 * Makefile.in (LIBCXXFLAGS_FOR_TARGET): Add -fno-implicit-templates.
8905 * configure.in (rs6000-*-*): Don't build gas.
8909 * Makefile.in: Use /x/x/ instead of /brokensed/brokensed/, to
8910 reduce command line length.
8911 (AS_FOR_TARGET): Check for as.new, not Makefile.
8912 (NM_FOR_TARGET): Check for nm.new, not Makefile.
8916 * config.guess: Merge from FSF.
8920 * configure: Don't use $ when handling program_suffix.
8924 * configure.in: Configure tk for hppa/hpux.
8928 * Makefile.in (LIBGXX_SUPPORT_DIRS): Add libstdc++.
8932 * Makefile.in: Move -fno-implicit-template from CXXFLAGS
8933 to LIBCXXFLAGS. Tests are better run without it.
8937 * Makefile.in (all-ispell): Depend on all-emacs19 instead of all-emacs.
8941 * configure.in (*-*-netware*): Don't configure xiberty.
8945 * configure.in: Remove tk from native_only list.
8949 * build-all.mk: Add mips-ncd-elf target to sun4 targets
8950 for special NCD build.
8954 * Makefile.in (DEVO_SUPPORT): Remove configure.bat and
8955 makeall.bat, they're only useful for binutils snapshots.
8956 (binutils.tar.gz, gas+binutils.tar.gz): Add configure.bat and
8957 makeall.bat to specified SUPPORT_FILES.
8961 * build-all.mk: Add Ericsson targets to sun4 and solaris
8962 hosts. Add BNR's sun4 target to solaris host, so their
8963 build-from-source will be tested in-house first.
8967 * Makefile.in (LIBCFLAGS): New variable.
8968 (CFLAGS_FOR_TARGET): Ditto.
8969 (LIBCFLAGS_FOR_TARGET): Ditto.
8970 (LIBCXXFLAGS): Ditto.
8971 (CXXFLAGS_FOR_TARGET): Ditto.
8972 (LIBCXXFLAGS_FOR_TARGET): Ditto.
8973 (BASE_FLAGS_TO_PASS): Pass them.
8974 (EXTRA_TARGET_FLAGS): Ditto.
8976 * configure.in: Support --enable-shared.
8980 * configure.in (target_libs): Include libstdc++ again.
8981 * config.guess: Update from FSF (for FreeBSD).
8985 * Makefile.in (DEVO_SUPPORT): Include configure.bat and
8987 (DISTDOCDIRS): Add `etc'.
8988 (ETC_SUPPORT_PFX): New variable.
8989 (taz): Include anything from etc starting with a word in
8994 * config.sub: Update for recent FSF changes. Remove obsolete
8995 h8300hds entry. Add -windows* and -osx as basic os. Minor
9000 * configure.in (target_libs): Remove libstdc++ for libg++-2.6.1.
9002 * config.guess: Merge with FSF.
9003 * configure.in: Match on i?86-ncr-sysv4.3, not i?86-ncr-sysv43.
9007 * configure: Since the "trap 0" handler will override the exit
9008 status on many systems, only use it for "exit 1", and make it set
9009 a non-zero exit status; reset it before "exit 0". Also, check
9010 exit status of config.sub, and error out if it failed.
9014 * Makefile.in: (ALL_TARGET_MODULES,INSTALL_TARGET_MODULES) Build
9015 and install libgloss.
9019 * Makefile.in (all-binutils): Depend upon all-byacc.
9021 * configure.in: Don't build emacs on Irix 5.
9025 * configure.in (*-*-netware*): Add libio.
9029 * Makefile.in (ALL_TARGET_MODULES): Add libstdc++.
9030 (CHECK_TARGET_MODULES): Ditto.
9031 (INSTALL_TARGET_MODULES): Ditto.
9032 (TARGET_LIBS): Ditto.
9033 (all-libstdc++): Note dependencies.
9037 * Makefile.in (BINUTILS_SUPPORT_DIRS): Add gas.
9041 * Makefile.in (CXXFLAGS): Use -fno-implicit-templates instead of
9042 -fexternal-templates.
9044 * configure.in (target_libs): Add libstdc++.
9045 (noconfigdirs): Add libstdc++ as appropriate.
9049 * config.guess: Update from FSF.
9053 * configure: Use ${config_shell} when running ${configsub}.
9057 * config.sub: No longer recognize h8300h.
9061 * config.sub: Remove extraneous differences between config.sub and
9066 * Makefile.in (DISTSTUFFDIRS): Add gas.
9070 * COPYING.NEWLIB: New file.
9074 * config.guess (HP-UX): Patch from Harlan Stenn
9079 * config.guess (sun4*:SunOS:*:*): Change '-JL' to '_JL'.
9083 * config.sub: Merge nextstep cleanup from FSF.
9087 * configure.in (arm-*-*): Don't configure ld for this target.
9091 * configure.in (*-*-netware): don't configure libg++, libio,
9096 * configure.in (alpha-dec-osf*): Use osf*, not osf1*. Don't
9097 configure ld--it works, but it doesn't support shared libraries.
9101 * config.guess (*-unknown-freebsd*): Get rid of possible
9102 trailing "(Release)" in version string.
9107 * config.guess: Fix i486-ncr-sysv43 -> i486-ncr-sysv4.3.
9108 Fix type: *-next-neststep -> *-next-nextstep.
9110 * config.guess: Merge from FSF:
9114 * config.guess: Recognize powerpc-ibm-aix3.2.5.
9118 * config.guess: Recognize UnixWare 1.1 (UNAME_SYSTEM is SYSTEM_V
9119 instead of UNIX_SV for UnixWare 1.0).
9123 * Makefile.in (all-gdb): Add dependencies on all-gcc and all-ld
9124 to make gdb/nlm/* build after the compiler and linker.
9128 * config.guess (netbsd, freebsd, linux): Accept any machine,
9130 (m68k-atari-sysv4): Relocate to match FSF version.
9132 * config.guess: More merges from the FSF:
9134 Add a space before function call or macro invocation.
9138 * config.guess: Add trap cmd to remove dummy.c and dummy when
9143 * config.guess (dummy.c): Redirect stderr for `hostinfo' command.
9144 (dummy): Redirect stderr from compilation of dummy.c.
9148 * config.guess: Distinguish between NeXTStep 2.1 and 3.x.
9152 * configure: Accept and ignore --cache*, for compatibility with
9157 * config.guess: Merge from FSF:
9161 * config.guess (Pyramid*:OSx*:*:*): New case.
9162 (PATH): Add /.attbin at end for finding uname.
9163 (dummy.c): Handle i860-alliant-bsd. Follow whitespace conventions.
9167 * config.guess (M88*:DolphinOS:*:*): New case.
9171 * config.guess (AViiON:dgux:*:*): Use TARGET_BINARY_INTERFACE
9172 to select whether to use ELF or COFF.
9176 * config.guess: Recognize i860-stardent-sysv and i860-unknown-sysv.
9180 * config.guess: Guess the OS version for HPUX.
9184 * config.guess (UNAME_VERSION): Recognize aix3.2.4 and aix3.2.5.
9188 * configure.in: Recognize --with-headers, --with-libs, and
9190 * Makefile.in (all-xiberty): Depend upon all-ld.
9194 * configure.in: Change i[34]86 to i[345]86.
9198 * configure (version): A few more tweaks to help message.
9202 * Makefile.in: Remove (for now) librx as a host library,
9203 now that we're building it for target.
9212 * configure.in: Also configure librx.
9216 * Makefile.in: Update various rules to reflect that librx
9217 is now needed for libg++.
9221 * config.sub: Accept mips64orion and mips64orionel as a CPU name.
9225 * configure.in: Configure the examples directory.
9229 * configure: Simplify Jun 2 1994 change.
9233 * change CC to /usr/latest/bin/gcc for lynx host builds, since
9234 /bin/gcc isn't good enough to build gcc.
9238 * Makefile.in (GDB_SUPPORT_FILES): Remove
9239 (setup-dirs-gdb, gdb.tar.gz, make-gdb.tar.gz): Remove old rules.
9240 (gdb.tar.gz): Add new rule to use standard distribution building
9245 * configure.in: Warn about use of /usr/ucb/cc on Solaris. From
9254 * configure: Search current dir first in .gdbinit.
9258 * config.sub: Recognize freebsd (merged from gcc config.sub).
9262 * config.sub: Refer to NeXT's operating system as nextstep.
9264 * config.sub (case $basic_machine): Re-order the cases, to match
9265 the order in the FSF version (which is mostly alphabethical).
9266 Merge in some additions and changes from the FSF.
9270 * config.guess: Recognize m68k-atari-sysv4 and m88k-harris-csux7.
9271 * config.sub: Recognize cxux7.
9272 * configure.in: Use mh-cxux for m88k-harris-cxux*.
9276 * config.sub: Fix typo powerpc -> powerpc-*.
9280 * Makefile.in: `all-emacs19' depends on `all-byacc'.
9282 * Makefile.in: Add all-emacs19 and install-emacs19 rules (in
9283 parallel with all-emacs and install-emacs). Top-level command
9284 `make all-emacs19 CC=gcc' now behaves as `make all-emacs CC=gcc'.
9288 * test-build.mk ($(host)-stamp-stage2-installed): Remove
9289 $(relbindir)/make before doing ``make install'', and use
9290 $(GNU_MAKE) while doing it. Avoids problem on SunOS with
9291 installing over running make binary.
9292 ($(host)-stamp-stage3-installed): Likewise.
9296 * config.guess: Recognize Mach.
9300 * configure: Check ${exec_prefixoption}, not ${exec_prefix}, to
9301 see whether --exec-prefix was used.
9305 * README: Explicitly mention libg++/README. (Zoo's idea.)
9309 * Makefile.in: Add all-librx target similar to all-libproc.
9313 * config.guess: Rearrange tests for Alpha-OSF1 to properly deal
9314 with post 1.2 uname bogosity.
9318 * configure: Remove temporary files on receipt of a signal.
9322 * configure: If there is a package_makefile_frag, remove
9323 ${subdir}/Makefile.tem after copying it in.
9327 * build_all.mk: support rs6000 lynx identifies itself as
9328 rs6000-lynx-lynxos2.2.2. Also, use /usr/cygnus/progressive/bin/gcc
9329 since /bin/gcc is too feeble to compile a modern gcc.
9333 * brought devo/test-build.mk update-to-date with progressive/
9334 test-build.mk. Add lynx targets and hppa flag info.
9338 * configure.in: Use mh-ncrsvr43. Patch from
9343 * config.guess (i386-unknown-bsdi): No longer need to
9344 check #if defined(__bsdi__) && defined(__i386__).
9348 * configure: Set program_transform_nameoption correctly.
9352 * brought build-all.mk update-to-date with progressive build-all.mk,
9353 added new targets and hppa info.
9357 * configure: If config.guess result is a prefix of the user
9358 specified target, assume a native build and use the user specified
9359 target as the host alias. Remove SunOS patch suffix removal hack.
9360 * configure.in: Remove SunOS patch suffix removal hack.
9362 * Makefile.in (CROSS_CHECK_MODULES): Remove check-flex, since it's
9363 in NATIVE_CHECK_MODULES.
9367 * Makefile.in: Rename HOST_ONLY to NATIVE.
9368 * configure: Delete SunOs patch suffix from host_canonical
9369 and build_canonical variables that are prepended to Makefiles.
9370 * configure.in: Add comments for easier maintenance.
9374 * Makefile.in: Add all-libproc target similar to all-gui.
9378 * Makefile.in (CHECK_MODULES): split into
9379 HOST_ONLY_CHECK_MODULES and CROSS_CHECK_MODULES.
9383 * config.guess (i386-unknown-bsdi): New system to guess.
9387 * Makefile.in: Add all-gui target (but not yet build by "all").
9391 * config.sub: Move deletion of patch suffix from here...
9392 * configure.in: To here, at Ian's suggestion. The top-
9393 level scripts might need to know of a patch level.
9397 * config.sub: Strip off patch suffix so rtl is recognized
9398 as a sunos4.1.3 machine, even though it's been patched.
9402 * Makefile.in (INSTALL_LAST): Delete.
9403 (INSTALL_DOSREL): New.
9407 * configure.in: Use ld for i[34]86-*-sysv4* and sparc-*-solaris2*.
9408 Don't set use_gnu_ld to no for *-*-sysv4; that only controls
9409 whether we pass down --with-gnu-ld anyhow.
9413 * Makefile.in (INSTALL_LAST): Change operation so it works
9414 on more flavors of make.
9415 * configure.in (go32): Don't build libg++ or libio.
9419 * Makefile.in (Move HOST_PREFIX_1 and friends up so
9420 they can be overriden by templates.
9424 * configure.in (target==go32): Don't build gdb.
9425 * dosrel: New directory.
9429 * configure.in (host==go32): Configure dosrel too.
9430 * Makefile.in (INTALL_TARGET): Call INSTALL_LAST last.
9431 (HOST_CC, HOST_PREFIX, HOST_PREFIX_1): Undefine, they should
9432 be set by incoming names or templates.
9433 (INSTALL_LAST): New rule.
9437 * config.sub (sparclitefrw, sparclitefrwcompat): Don't set the os.
9441 * configure.in (appdirs): New variable. Currently empty, but will
9442 be used in gas distribution. If nonempty, lists a set of
9443 directories at least one of which must get configured, or top
9444 level configuration is considered to have failed.
9445 (rs6000-*-lynxos*): Use new file name.
9449 Eliminate XTRAFLAGS.
9450 * Makefile.in (CC_FOR_TARGET): If newlib exists, refer to the
9451 newlib include files using -idirafter, and also use -nostdinc.
9452 (CXX_FOR_TARGET): Likewise.
9453 (XTRAFLAGS): Removed.
9454 (BASE_FLAGS_TO_PASS): Remove XTRAFLAGS_FOR_TARGET.
9455 (EXTRA_HOST_FLAGS): Remove XTRAFLAGS.
9456 (EXTRA_TARGET_FLAGS, EXTRA_GCC_FLAGS): Likewise.
9457 ($(DO_X)): Don't pass down XTRAFLAGS.
9461 * configure.in (mips*-dec-bsd*): New target; do build linker.
9462 (mips*-*-bsd*): New target; don't build linker.
9466 * configure.in: support rs6000-*-lynxos* configuration.
9467 support sunos4 as a cross target.
9469 * config.sub: look for lynx*, not lynx since the OS version may
9470 legitimately be part of the name.
9474 * configure.in (i[34]86-*-sco*): Move to be with other i386
9476 (romp-*-*): New target. Skip various binary utilities.
9477 (vax-*-*): New target. Don't build newlib.
9478 (vax-*-vms): Renamed from *-*-vms. Don't build opcodes or newlib.
9482 * configure.in: Only set host_makefile_frag if config
9487 * install.sh: If $dstdir exists, don't check whether each
9492 * test-build.mk (HOLES): Add sleep; used by rcs/src/conf.sh.
9496 * configure.in (*-*-lynxos*): Don't configure newlib for either
9497 native or cross Lynx.
9501 * config.sub (sparc64-elf): Fix os.
9502 (z8k): Remove duplicate.
9506 * Makefile.in (gcc-no-fixedincludes): Touch gcc/include/fixed, not
9507 gcc/stmp-fixproto, to try to prevent fixproto from being run.
9511 * configure: Make file links cleanly even if Lynx fails on
9512 an NFS symlink (at least fail cleanly).
9516 * test-build.mk (CC): For mips-sgi-irix4, change -XNh1500 to
9521 * configure: Unknown options are fatal again.
9525 * configure: Ignore --x-includes and --x-libraries, for Autoconf
9530 * build-all.mk: Add `clean' target.
9534 * config.guess: Add SINIX support.
9535 * configure.in: Add mips-*-sysv4* support.
9539 * build-all.mk: Document all useful targets.
9540 If canonhost is sparc-sun-solaris2.3, change it to sparc-sun-solaris2.
9541 If canonhost is mips-sgi-irix4.0.5H, change it to mips-sgi-irix4.
9545 * configure: Support --silent, --quiet.
9549 * configure: Support --disable-FEATURE.
9553 * config.guess: Recognize NCR running SVR4.3.
9557 * config.guess: Make BSDI generate i386-unknown-bsd386.
9562 * configure.in (powerpc-*-aix*): Treat like rs6000-*-*.
9566 * configure: Make unrecognized options give nonfatal warnings
9567 instead of fatal errors, and pass them to any subdirectory
9568 configures in case they recognize them.
9569 Make --x equivalent to --with-x.
9573 * configure: Add --enable-* options. Clean up usage message and
9578 * Makefile.in (NM_FOR_TARGET): Build tree version is now nm.new.
9582 * configure.in (hppa*-*-*): Enable binutils.
9586 * config.sub: Recognize cisco.
9590 * Makefile.in (CXXFLAGS): Add -fexternal-templates.
9594 * config.guess: about target *-hitachi-hiuxwe2, don't print more
9595 than one configuration name. Add comment.
9599 * config.guess: about target *-hitachi-hiuxwe2, fixed
9600 machine guessing order. [Hitachi's CPU_IS_HP_MC68K
9601 macro is incorrect.]
9605 * Makefile.in (TAGS): Just build TAGS in each subdirectory, rather
9606 than the "make ls" stuff which used to be here.
9610 * config.guess: Recognize i[34]86-unknown-freebsd.
9615 * configure.in (noconfigdirs for alpha): Remove libg++ and libio.
9619 * config.guess: Check for ptx.
9623 * config.sub: Add os9k checking.
9627 * config.guess: Handle OSF1 running on HPPA processors
9631 * configure: If subdir configure fails, print out a message with
9632 subdirectory name, in case subdir's configure code didn't identify
9637 * configure.in: Remove embedded newlines from configdirs.
9638 Avoid mismatches of substrings. Fix matching strings at end
9641 Fri Feb 11 15:33:33 1994 Stu Grossman (grossman at cygnus.com)
9643 * config.guess: Add Lynx/rs6000 config support.
9647 * configure.in (alpha-dec-osf1*, alpha*-*-*): Build gas.
9651 * configure.in (hppa*-*-osf*): Treat this just like most other
9652 PA configurations (eg no binutils or ld).
9653 (hppa*-*-*elf*): These configurations have binutils and ld.
9661 * configure.in (rs6000-*-*): Build gas.
9665 * Makefile.in: Avoid bug in losing hpux sed.
9669 * Makefile.in, test-build.mk: Remove MUNCH_NM; it was only needed
9670 for GDB and GDB has been fixed to not need it.
9674 * config.guess: Recognize vax hosts.
9678 * configure (while loop): Don't use "break 2" inside case
9679 statement -- the case statement isn't an enclosing loop.
9683 * config.guess: Clean up NeXT support, to allow nextstep
9684 on Intel machines. Make OS be nextstep.
9688 * config.guess: Add alternate forms for Convex.
9690 Thu Jan 20 16:13:41 1994 Stu Grossman (grossman at cygnus.com)
9692 * configure: Completely rewrite option processing. Take
9693 advantage of pattern-matching to avoid invoking test frequently.
9694 Also clean up host and target defaulting logic.
9698 * Makefile.in: Replace all occurrances of "rootme" with "r" and
9699 "$${rootme}" with "$$r", to increase the likelihood that the do-*
9700 commands (plus user environment) will fit SCO limits.
9704 * configure.in: Don't issue warnings about directories which are
9705 not being configured if -norecursion is set. Correct test for
9706 --with-gnu-as and --with-gnu-ld to not get confused by substring
9709 * configure.in: Don't build gas for alpha-dec-osf1*.
9711 Tue Jan 4 17:10:19 1994 Stu Grossman (grossman at cygnus.com)
9713 * configure: Back out Per's change of 12/19/1993. It changes the
9714 behavior of configure in unexpected and confusing ways.
9716 Also, use different delim char when calculating
9717 program_transform_name so that the name can contain slashes.
9721 * configure.in, config.sub: Add support for VSTa micro-kernel.
9725 * configure.in: Nuke hacks which were used to get a special
9726 version of GAS for HPPA configurations.
9730 * configure: If only ${target_alias} is given, use that
9731 as the default for ${host_alias}.
9732 * configure: Add missing back-slashes before nested quotes.
9736 * Makefile.in (BASE_FLAGS_TO_PASS): add YACC=$(BISON)
9740 * config.guess: Recognize some Tektronix configurations.
9745 * config.sub: Match any flavor of SH.
9749 * configure.in: Don't try to configure newlib for Alpha.
9753 * configure.in: Don't build ld for Irix 5. Don't build gas,
9754 libg++ or libio for any Alpha target.
9756 * configure.in (mips*-sgi-irix5*): New target; use mh-irix5.
9760 * Makefile.in (GZIPPROG): Renamed from GZIP, which gzip uses for
9761 default arguments -- so it tried to compress itself.
9765 * configure.in (notsupp): ensure that a space is always at the end
9766 of the configdirs list, since the grep checks for an explicit space
9770 * configure.in (target i386-sysv4.2): don't build ld, since static
9771 versions of many libraries are not available.
9775 * config.guess: Recognize Apollos (using environment variables).
9776 * configure.in: Don't configure ld, binutils, or gprof for Apollo.
9780 * config.guess: Recognize Sony news mips running newsos.
9784 * Makefile.in (all-cygnus, build-cygnus): "fi else" needs to be
9785 "fi ; else" for bash.
9789 * Makefile.in (BASE_FLAGS_TO_PASS): pass SHELL.
9793 * config.sub: accept unixware as an alias for svr4.2.
9794 Fix some inconsistancies with the gcc version.
9798 * Makefile.in (DISTDOCDIRS): Add gdb.
9802 * Makefile.in (DISTDOCDIRS): Add libg++ and libio.
9806 * Makefile.in (taz): Only build "info" in DISTDOCDIRS.
9807 (DISTDOCDIRS): Don't assume libg++ and gdb folks necessarily want
9812 * config.sub: Accept hiux* as an OS name.
9814 * Makefile.in: Change RUNTEST_FLAGS back to RUNTESTFLAGS per
9815 etc/make-stds.texi. The underscore came from gcc, and dje now
9816 agrees that RUNTESTFLAGS is the correct name.
9820 * install.sh: Remove 'set -e'. It makes any conditionals
9821 in the script useless.
9823 * config.guess: Automatically recognize arm-acorn-riscix
9828 * Makefile.in: Change RUNTESTFLAGS to RUNTEST_FLAGS
9832 * Makefile.in (DISTDOCDIRS): New variable.
9833 (taz): Edit local Makefile.in sooner, instead of proto-toplev
9834 Makefile.in later. Build "info" and "dvi" in DISTDOCDIRS.
9838 * configure.in (hppa target): check the source directory for the
9843 * config.sub: Allow -aout* and -elf*.
9847 * configure.in: Don't build ld on i386-solaris2, same as for
9852 * Makefile.in (taz): Add texinfo/lgpl.texinfo (for libg++).
9856 * configure.in: Configure gdb for alpha.
9860 * Makefile.in (CXXFLAGS): Add -O.
9864 * config.guess: added support for DG Aviion
9868 * configure.in: Produce warning message for subdirectories not
9869 configurable for this host/target combination. Don't try to
9870 configure gdb for vms.
9874 * Makefile.in (taz): Replace "byacc" with "bison -y" in the
9875 appropriate files before making "diststuff".
9876 (DISTBISONFILES): New var: list of files to be edited.
9877 (DISTSTUFFDIRS): Add binutils.
9881 * config.sub: also handle mipsel and mips64el (for little endian mips)
9885 * configure.in: Add * to end of all OS names.
9889 * configure.in: Build newlib for LynxOS native.
9893 * config.guess: Add support for delta 88k running SVR3.
9895 * configure.in: Add comment about HP compiler vs. emacs.
9899 * configure.in: don't build ld on solaris2 (not a viable option
9900 due to bugs in getpwnam & getpwuid)
9904 * configure.in: Accept alpha-dec-osf1*, not just -osf1, since
9905 config.guess will produce a full version number.
9909 * configure.in: Build linker and binutils for alpha-dec-osf1.
9913 * Makefile.in: Remove -O from CXXFLAGS for consistency with CFLAGS,
9914 and gdb/testsuite/Makefile.in.
9918 * configure.in: recognize mips*- instead of mips-
9922 * config.sub: Accept linux*coff and linux*elf as operating
9927 * config.sub: Recognize mips64, and mips3 as an alias for it.
9931 * configure.in: Remove alpha-dec-osf*, no longer necessary now that
9932 gdb knows how to handle OSF/1 shared libraries.
9936 * configure.in: Recognize hppa*-*-hiux* (currently synonym for hpux).
9937 * config.guess: Recognize Hitachi's HIUX.
9938 * config.sub: Recognize h3050r* and hppahitachi.
9939 Remove redundant cases for hp9k[23]*.
9943 * configure.in: default to '--with-gnu-as' and '--with-gnu-ld'
9944 if gas and ld are in the source tree and are in ${configdirs}.
9945 If ${use_gnu_as} or ${use_gnu_ld} are 'no', then don't set the
9946 --with options (but still pass them down on the command line,
9947 if they were explicitly specified).
9951 * configure: substitute SHELL value in Makefile.in with
9956 * configure.in: Build gas, ld, and binutils for *-*-sysv4* and
9957 *-*-solaris2* targets.
9961 * Makefile.in: define M4, and pass it down to sub-makes;
9962 all-autoconf now depends on all-m4
9966 * Makefile.in ({AR,RANLIB}_FOR_TARGET): make contingent on
9967 presence of {ar,ranlib} instead of a configured directory
9971 * config.guess: Accept 34?? as well as 33?? for NCR.
9975 * configure.in: grab mt-hppa for HPPA targets; use 'gas ' instead
9976 of 'gas' in sed commands, since 'gash' is now in the tree as well.
9980 * configure: grab values for $(CC) and $(CXX) from the
9981 environment, so that someone can do "CC=gcc configure; make" and
9982 have it work right (matching the way that autoconf works now)
9984 * configure.in, Makefile.in: add support for gash, the tcl
9987 * config.guess: add NetBSD variants (hp300, x86)
9991 * install.sh: Support -d option (in the manner of SunOS 4 install,
9992 as it is more deterministic than that of GNU install)
9993 (chmodcmd): Set file to mode 755 by default (should also do default
9994 chgrp and chown, but I don't feel like dealing with that now)
9998 * config.sub: Remove h8300hhms alias.
10002 * configure.in: Match *-*-solaris2* not *-sun-solaris2*.
10006 * Makefile.in (gcc-no-fixedincludes): touch stmp-fixproto as well
10011 * config.sub: recognize m88110-bug-coff.
10015 * Makefile.in (all-libio): all dependencies on the toolchain used
10016 to build this (gcc, gas, ld, etc)
10020 * config.guess: Deal with OSF/1 1.3 on alpha.
10024 * install.sh: add some 'else true' clauses for portability
10026 * configure.in: don't build libio for h8[35]00-*-* targets
10030 * Makefile.in: Add support for new libio.
10034 * install.sh: If one command fails, don't try the rest. Don't try
10035 to remove $dsttmp (via trap) unless we have already created it.
10036 If $src doesn't exist, detect it and exit with an error.
10038 * config.guess: Recognize BSD on hp300.
10042 * config.guess: Map (9000/[34]??:HP-UX:*:*) to m68k-hp-hpux.
10047 * Makefile.in (all-send-pr): depends on all-prms
10051 * config.guess: Fix typo (9000/8??:4.3bsd -> 9000/7??:4.3bsd).
10056 Added test for mips-mips-riscos5.
10060 * configure.in: use mh-hp300 for 68k HP hosts
10064 * configure: add support for CONFIG_SHELL, so that you can use
10065 some alternate shell for evaluating configure scripts
10069 * Makefile.in (make-gdb.tar.gz): Sed bug reporting address
10071 distribution archive.
10072 * Makefile.in (COMPRESS): Remove def.
10073 * Makefile.in (gdb.tar.gz, make-gdb.tar.gz): Renamed from
10074 gdb.tar.Z and make-gdb.tar.Z respectively.
10075 * Makefile.in (make-gdb.tar.gz): Now only build gzip'd archive.
10076 * Makefile.in (make-gdb.tar.gz): Minor changes to move closer
10077 to convergence with 'taz' target in Makefile.in.
10081 * install.sh (dsttmp): use trap to ensure that tmp files go
10082 away on error conditions
10086 * Makefile.in (BASE_FLAGS_TO_PASS): remove LOADLIBES
10090 * Makefile.in (install-dirs): Deal with a prefix like /gnu;
10091 its parent is '/' not ''.
10093 * Makefile.in (DEVO_SUPPORT): Add comments about ChangeLog.
10097 * configure: if ${newsrcdir}/configure doesn't exist, don't assume
10098 that ${newsrcdir}/configure.in does.
10102 * test-build.mk: support for CONFIG_SHELL
10106 * config.sub (netware): Add as a basic system type.
10110 * Makefile.in (Makefile): depend on configure.in. Also drop the
10111 $(srcdir)/ from the dependency on Makefile.in.
10115 * config.sub: Recognize h8300hhms as h8300h-hitachi-hms.
10116 (h8300hhms is temporary until multi-libraries are implemented).
10117 * configure.in: Handle h8300h too.
10121 * config.guess: Recognize dpx/2 as m68k-bull-sysv3.
10125 * configure: Remove extraneous output when guessing host type.
10126 * config.guess: Remove extraneous output when guessing using C
10127 compiler rather than uname, or when guessing fails.
10129 Wed Jul 7 17:58:14 1993 david d `zoo' zuhn (zoo at rtl.cygnus.com)
10131 * Makefile.in: remove all.cross and install.cross targets
10133 * configure: remove CROSS=-DCROSS_COMPILE and ALL=all.cross
10138 * configure.in (target sh): Build gprof.
10140 Thu Jul 1 16:52:56 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
10142 * config.sub: change -solaris to -solaris2
10146 * configure.in: Use config/mh-riscos for mips-*-sysv*.
10150 * configure: Correct error message for missing Makefile.in to
10151 print correct directory.
10153 Tue Jun 29 13:52:16 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
10155 * install.sh: kludge around 386BSD shell bug
10159 * config.guess: Recognize NeXT.
10160 * config.guess: Recognize i486-ncr-sysv4.
10161 * Makefile.in (taz): rm $(TOOL)-$$VER before linking.
10165 * Makefile.in (MAKEINFOFLAGS): New variable.
10166 (FLAGS_TO_PASS): Pass MAKEINFO as MAKEINFO MAKEINFOFLAGS.
10167 * build-all.mk, test-build.mk: Pass down --no-split as
10168 MAKEINFOFLAGS when hosted on DOS. Compile DOS hosted without -g.
10172 * Makefile.in (DEVO_SUPPORT): Add COPYING COPYING.LIB install.sh.
10176 * Makefile.in (libg++.tar.z): New rule.
10177 * Makefile.in (taz): Replace 'configure -rm' by 'make distclean'.
10178 * Makefile.in (taz): Only do a single chmod.
10180 Fri Jun 18 12:03:10 1993 david d `zoo' zuhn (zoo at majipoor.cygnus.com)
10182 * install.sh: don't use dirname anymore (replaced with sed usage)
10186 * Makefile.in: Change extension for gzip'd files from '.z' to
10187 '.gz' per new FSF standard usage.
10189 Thu Jun 17 16:58:50 1993 david d `zoo' zuhn (zoo at majipoor.cygnus.com)
10191 * configure: put quotes around the final value of program_transform_name
10193 Tue Jun 15 16:48:51 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
10195 * Makefile.in: new install.sh support; update install-info rules
10199 * configure.in: Build diff for crosses, but not for go32 host.
10201 * configure.in: Build gprof only for native, and don't build it
10202 for mips-*-*, rs6000-*-*, or i[34]86-*-sco*.
10204 Mon Jun 7 13:12:11 1993 david d `zoo' zuhn (zoo at deneb.cygnus.com)
10206 * configure.in: don't build gas,ld,binutils on for *-*-sysv4
10210 * configure.in (host_tools): Add prms.
10212 Fri Jun 4 13:30:42 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
10214 * Makefile.in: install gcc, do installation of $(INSTALL_MODULES)
10215 with $(FLAGS_TO_PASS) on the command line
10217 * config.sub: Recognize lynx and lynxos
10221 * config.sub: Accept -ecoff*, not just -ecoff.
10225 * Makefile.in (taz): Use .gz suffix instead of .z.
10226 (binutils.tar.gz, gas+binutils.tar.gz, gas.tar.gz): Fixed target
10229 Thu Jun 3 00:27:06 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
10231 * Makefile.in (vault-install): add an 'else true' (for Ultrix)
10233 Wed Jun 2 18:19:16 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
10235 * Makefile.in (install-no-fixedincludes): install gcc last, so
10236 that rebuilds that might happen during 'make install' don't get
10237 bogus gcc include files
10241 Change from Utah for HPPA support:
10242 * config.guess: Recognize hppa1.x-hp-bsd.
10246 * config.guess: Add support for Motorola Delta 68k, up to r3v7.
10249 Tue Jun 1 17:48:42 1993 Rob Savoye (rob at darkstar.cygnus.com)
10251 * config.sub: Add support for rom68k and bug boot monitors.
10255 * Makefile.in: Make all-opcodes depend on all-bfd.
10259 * config.guess: Added special check for i[34]86-univel-sysv4*.
10263 * config.guess: For i[34]86-unknown-sysv4 use UNAME_MACHINE for
10264 the processor rather than assuming i486.
10268 * config.guess: Recognize SunOS6 as Solaris3.
10272 * config.guess: Fix typo. Avoid #elif (not in K&R 1).
10273 Recognize SunOS 5.* only (and not [6-9].*) as being Solaris2.
10277 * build-all.mk (all-cross): New target for Canadian Cross.
10278 Added Q2 go32 targets.
10279 * test-build.mk: Configure go32 cross sparclite-aout and
10280 mips-idt-ecoff -with-gnu-ld. Moved build binary directory from
10281 PARTIAL_HOLE_DIRS to BUILD_HOLES_DIRS.
10283 Mon May 24 15:30:06 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
10285 * configure.in: fix Alpha GDB typo; also, don't build DejaGnu for
10286 GO32 hosted toolchains
10288 Mon May 24 14:18:41 1993 Rob Savoye (rob at darkstar.cygnus.com)
10290 * configure: change so "-exec-prefix" gets passed down rather
10291 than "-exec_prefix" so autoconf generated Makefiles get the
10292 exec_prefix set right.
10294 Fri May 21 10:42:25 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
10296 * config.guess: get the Solaris2 minor version number
10298 * Makefile.in: add standards.texi and make-stds.texi to ETC_SUPPORT
10302 * config.guess: Recognize some Sequent platforms.
10304 Thu May 20 14:33:48 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
10306 * Makefile.in: added the vault-install target
10308 * configure.in: actually use the Sun3 makefile fragment that's in
10309 config, also added the release dir to configdirs
10313 * Makefile.in (taz): Fix modes on stuff in $(TOOL) dir also.
10315 Tue May 18 20:26:41 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
10317 * configure.in: remove some program from Alpha targetted toolchains
10321 * Makefile.in (DISTSTUFFDIRS): Renamed from PROTODIRS. Add ld and
10323 (taz): Run "make diststuff" in those directories instead of "make
10324 proto-dir". Look for "VERSION=" only at start of line in subdir
10325 Makefile. Use "gzip -9" for compression.
10326 (TEXINFO_SUPPORT, DIST_SUPPORT, BINUTILS_SUPPORT_DIRS): New vars.
10327 (binutils.tar.z): New target.
10331 * Makefile.in (taz): Include gpl.texinfo.
10335 * Makefile.in (setup-dirs): Merged into "taz" target.
10336 (taz): Only do `proto-dir' stuff if a directory is actually needed
10341 * Makefile.in (MUNCH_NM): New variable, defined to be $(NM).
10342 (FLAGS_TO_PASS): Pass down MUNCH_NM.
10343 (HOST_CC, HOST_PREFIX, HOST_PREFIX_1): New variables.
10344 (EXTRA_GCC_FLAGS): Pass down HOST_* variables.
10345 (gcc-no-fixedincludes): Correct for current gcc Makefile.
10349 * Makefile.in (make-gdb.tar.Z): Add configure, config.guess,
10350 config.sub, and move-if-change to gdb testsuite distribution
10351 archive, so the testsuite can be extracted, configured, and
10352 run separately from the gdb distribution. Blow away the Chill
10353 tests that require a Chill compiled executable, since GNU Chill
10354 is not yet publically available.
10356 Mon May 10 17:22:26 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
10358 * test-build.mk: set environment variables in a single command,
10359 instead of a list of assignments and exports
10361 * config.guess: recognize Alpha/OSF1 systems
10365 * configure: Change help message to prefer --options rather than
10370 * config.sub: Convergent Tech. "miniframe" uses m68010, sez
10372 * config.guess: Recognize miniframe.
10374 Sun May 9 17:47:57 1993 Rob Savoye (rob at darkstar.cygnus.com)
10376 * Makefile.in: Use srcroot to find runtest rather than rootme.
10377 Pass RUNTESTFLAGS and EXPECT down in BASE_FLAGS_TO_PASS.
10381 * test-build.mk: Extensive additions to support building on a
10382 machine other than the host.
10386 * configure (tooldir): Fix for i386-aix again.
10390 * configure, Makefile.in: Change definition of $(tooldir)
10395 * config.guess: Recognize i[34]86/SVR4.
10399 * Makefile.in (all-gdb): gdb depends on sim.
10403 * Makefile.in (gdb.tar.Z): Make prototype gdb testsuite directory
10404 at the same time we make the prototype gdb directory.
10405 * Makefile.in (make-gdb.tar.Z): Make the testsuite distribution
10406 files at the same time as the gdb base release distribution.
10410 * Makefile.in (check): Use individual check targets rather than
10412 (check-gcc): Added.
10416 * config.sub: Use sysv3.2 not sysv32 for canonical OS
10417 for System V release 3.2.
10421 * config.sub: Recognize hppaosf.
10422 * configure.in: Do configure ld/binutils/gas for it.
10426 * configure (tooldir): Alter syntax used to set this, for systems
10427 where "\$" isn't handled right, like i386-aix.
10431 * configure: Pass program-transform-name, not
10432 program_transform_name, to recursive configures.
10436 * Makefile.in (gas+binutils.tar.z): New rule for building snapshots
10437 of gas+ld+binutils.
10441 * config.guess: Recognize AIX3.2 as distinct from 3.1.
10443 Sat Apr 17 17:19:50 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
10445 * configure.in: rename m88k-motorola-m88kbcs to m88k-motorola-sysv
10449 * Makefile.in (PRMS): Set back to all-prms.
10453 * test-build.mk: Pass -with-gnu-as for known MIPS native and MIPS
10454 targets, rather than for MIPS hosts.
10456 Fri Apr 9 13:51:06 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
10458 * configure.in: add comment for --with-x default values
10460 * config.guess: handle Motorola Delta88 box for SVR3 and SVR4.
10462 * Makefile.in: add check-* targets for each of the directories in
10463 the tree. Add a definition of RUNTEST that will use the one we
10464 just built, if it exists. Pass this down via FLAGS_TO_PASS.
10468 * configure.in: Removed obsolete references to bfd_target and
10469 target_makefile_frag.
10471 * build-all.mk: Set assorted targets for Q2.
10472 * config.sub: Recognize z8k-sim and h8300-hms.
10473 * test-build.mk: Really don't pass host to configure.
10474 (HOLES): Added uname.
10478 * configure: Handle an empty program-prefix, program-suffix or
10479 program-transform-name correctly.
10483 * build-all.mk: -G 8 no longer required for MIPS targets.
10484 * test-build.mk: Don't pass host argument to configure; make it
10489 * Makefile.in (gdb.tar.Z): Fix for building gzip'd distribution.
10490 * Makefile.in (COMPRESS): New macro, like GZIP.
10494 * test-build.mk: Use -with-gnu-as for mips-sgi-irix4 as well.
10496 * build-all.mk: Set GCC to gcc -O -G 8 for MIPS targets, since gcc
10497 with gas currently defaults to -G 0.
10501 * Makefile.in (all-flex): flex depends on byacc.
10503 * build-all.mk: If host not specified, use config.guess. Pass TAG
10504 to test-build.mk as RELEASE_TAG.
10505 * test-build.mk (configargs): New variable containing arguments to
10506 pass to configure. Set to -with-gnu-as on mips-dec-ultrix.
10507 (FLAGS_TO_PASS): Pass down RELEASE_TAG.
10509 * config.guess: Use /bin/uname when checking -X argument on SCO,
10510 to avoid invoking GNU uname which doesn't understand -X.
10512 * test-build.mk: Don't use /usr/unsupported/bin/as on AIX.
10514 * configure.in: Build gas for mips-*-*.
10518 * Makefile.in (all.normal): insert missing backslash.
10522 * build-all.mk: Bump -XNh value to 1500 to match gcc requirements.
10524 * Makefile.in: Complete overhaul to merge many almost identical
10529 * Makefile.in (setup-dirs-gdb): Renamed from setup-dirs.
10530 (gdb.tar.Z): Adjusted.
10532 * Makefile.in (setup-dirs, taz): New targets; should be general
10533 enough to adapt for gdb sometime. Build only .z file.
10534 (gas.tar.z): New target.
10538 * build-all.mk: Use CC=cc -Xs on Solaris.
10543 for handling BISON for FSF releases.
10547 * configure: Actually implement the change zoo just documented.
10549 Wed Mar 24 13:02:44 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
10551 * configure: when using config.guess, only set target_alias when
10552 it's not already been set (ie, on the command line)
10554 Mon Mar 22 23:07:39 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
10556 * Makefile.in: add installcheck target, set PRMS to install-prms
10558 Sun Mar 21 16:46:12 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
10560 * configure: add support for package_makefile_fragment, handle the
10561 case where a directory has a configure.in file but no Makefile.in
10562 more gracefully (with an actual understandable error message, even);
10563 add support for --without (and add this to the usage message); also
10564 explicitly add a --host=${host_alias} to the command line when
10565 config.guess is used
10569 * configure: Must use both --host and --target in recursive calls.
10573 * Makefile.in: Change deja-gnu to dejagnu.
10577 * configure.in (h8300-*-*, h8500-*-*): Don't build libg++.
10579 Fri Mar 12 18:30:14 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
10581 * configure.in: canonicalize all instances to *-*-solaris2*,
10582 also strip out a number of tools to not build for go32 host
10586 * config.guess: add GPL.
10588 * Makefile.in, config.guess, config.sub, configure: bump
10593 * Makefile.in (do-info): Removed obsolete check for existence of
10596 * Makefile.in (MAKEOVERRIDES): Define to be empty.
10598 Wed Mar 10 03:11:56 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
10600 * Makefile.in: a couple of 'else true' for decstation,
10603 * configure.in: configure tclX too; don't remove Tk on RS/6000 anymore
10607 * Makefile.in (setup-dirs): change invocation of make to $(MAKE).
10609 Mon Mar 8 14:52:11 1993 Ken Raeburn (raeburn@cambridge)
10611 * config.guess: Recognize i386-ibm-aix (PS/2).
10612 * configure.in: Use config/mh-aix386 file for it.
10616 * Makefile.in (GCC_FOR_TARGET): Eliminated definition; use
10617 CC_FOR_TARGET instead.
10618 (BASE_FLAGS_TO_PASS): Pass GCC_FOR_TARGET=$(CC_FOR_TARGET).
10622 * Makefile.in: Add sim to list of directories sent with gdb
10626 * configure.in: Put back mips-dec-bsd* case.
10631 * configure.in (vax-*-ultrix2*): Add Ultrix 2.2 triplet.
10632 * config.guess: Change 'VAX*:ULTRIX:*:*' to 'VAX*:ULTRIX*:*:*'.
10634 Tue Mar 2 18:11:03 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
10636 * configure.in: remove no-op mips-dec-bsd* in "case $target"
10638 * Makefile.in (dir.info): only run gen-info-dir if it exists,
10639 (install-info): install dir.info only if it exists,
10640 (all-expect, install-expect): pass along X11_FLAGS_TO_PASS
10644 * configure.in: For vms target, skip bfd, ld, binutils. Do build
10645 gas for mips-dec-bsd.
10649 * configure (makesrcdir): If ${srcdir} is relative and not ".",
10650 and ${subdir} is not ".", set makesrcdir based on ${invsubdir}.
10654 * configure.in: Added "dejagnu" to hosttools list.
10658 * config.sub, configure.in, config.guess: Add support
10659 for Bosx, an AIX variant from Bull.
10664 * devo/dejagnu: Initial creation of devo/dejagnu.
10665 Migrated dejagnu testcases and support files for testing software
10666 tools to reside as subdirectories, currently called "testsuite",
10667 within the directory of the software tool. Migrated all programs,
10668 support libraries, etc. beloging to dejagnu proper from
10669 devo/deja-gnu to devo/dejagnu. These files were moved "as is"
10670 with no modifications. The changes to these files which will
10671 allow them to configure, build, and execute properly will be made
10672 in a future update.
10676 * Makefile.in: Change send_pr to send-pr.
10677 * configure.in: Likewise.
10678 * send_pr: Renamed directory to send-pr.
10682 * Makefile.in: Add some extra semi-colons (needed if SHELL=bash).
10686 * README: Update for gdb-4.8 release.
10687 * Makefile.in (gdb.tar.Z): Add texinfo/tex3patch. Build
10688 gdb-xxx.tar.z (gzip'd) file also.
10690 Thu Feb 18 09:16:17 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
10692 * Makefile.in: make all-diff depend on all-libiberty
10696 * config.guess: add vax-ultrix in the spirit of mips-ultrix.
10698 Tue Feb 16 05:57:15 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
10700 * configure.in, Makefile.in: add hello, tar, gzip, recode, indent
10704 * Makefile.in (DEVO_SUPPORT): Remove etc directory
10705 (ETC_SUPPORT): Only add the files GDB wants from etc/.
10706 (gdb.tar.Z): Use ETC_SUPPORT. Use byacc when building the file.
10708 Thu Feb 11 20:14:28 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
10710 * Makefile.in: makeinfo binary is in a new location
10714 * config.sub: Accept -ecoff as an OS.
10716 * Makefile.in: Various changes to eliminate a level of make
10717 recursion and reduce the required command line length.
10718 (BASE_FLAGS_TO_PASS): New variable holding flags passed to all
10720 (EXTRA_HOST_FLAGS, EXTRA_TARGET_FLAGS, EXTRA_GCC_FLAGS): New
10721 variables holding settings for specific sub-makes.
10722 (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS, GCC_FLAGS_TO_PASS): Rewrote
10723 in terms of BASE_FLAGS_TO_PASS.
10724 (TARGET_LIBS): New variable listing directories which use
10725 TARGET_FLAGS_TO_PASS.
10726 (subdir_do): Eliminated.
10727 (do-*): New set of targets to replace subdir_do.
10728 (various): All targets which used subdir_do now depend on do-*.
10729 (local-clean): Renamed from do_clean.
10730 (local-distclean): New target, dependency of distclean and
10732 (install-info): Don't create directories. Depend on dir.info
10733 rather than calling make recursively.
10734 (install-dir.info): Eliminated.
10735 (install-info-dirs): Create all info directories here.
10736 (dir.info): Depend upon do-install-info.
10738 * test-build.mk (HOLES): Added false.
10742 * config.guess: Recognize BSDI and BSDJ (Jolitz 386bsd).
10744 Thu Feb 4 20:49:18 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
10746 * Makefile.in (info): remove dependency on all-texinfo. The
10747 problem was really in texinfo/C, not at this level.
10751 * Makefile.in (info): Added dependency on all-texinfo (PR 2112).
10755 * Makefile.in (make-gdb.tar.Z): Change BISON to 'bison -y' for
10760 * configure: Include srcdir in message about target of link not
10761 being found. Don't convert `-' to `_' in `with' options being
10764 Tue Feb 2 18:57:59 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
10766 * configure.in: add uudecode to host_tools
10768 * Makefile.in: added {all,install}-uudecode targets, added them to
10769 the appropriate lists
10773 * Makefile.in (all-gcc): Added dependency on all-gas.
10775 * configure.in (mips-*-*): Build ld and binutils.
10779 * configure: check return code from mkdir, print error message and
10784 * Makefile.in (make-gdb.tar.Z): New location for texinfo.tex.
10788 * test-build.mk (HOLES): Added tar, cpio and uudecode.
10792 * config.sub (h8500): Recognize this as a cpu type.
10794 Sat Jan 23 20:32:01 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
10796 * configure: source directory missing is no longer a warning
10798 * configure.in: recognize irix[34]* instead of irix[34]
10800 * Makefile.in: define and pass down X11_LIB
10804 * guess-systype: Renamed to ...
10805 * config.guess: ... by popular request.
10806 * configure.in, Makefile.in: Update accordingly.
10811 + Add Convex, Cray/Unicos, and Encore/Multimax support.
10812 + Execute ./dummy instead of assuming . is in PATH.
10816 * guess-systype: New shell script. Attempts to guess the
10817 canonical host name of the executing host.
10818 Only a few hosts are supported so far.
10819 * configure: Call guess-systype if no host is specified.
10823 * Makefile.in (gcc-no-fixedincludes): Made to work with current
10829 * Makefile.in (GCC_FLAGS_TO_PASS): New variable.
10830 (all-gcc, install-gcc, subdir_do): Use it.
10834 * Makefile.in: Rename uninstalled gcc driver from gcc to xgcc.
10838 * Makefile.in: Removed explicit setting of SUBDIRS. SUBDIRS is now
10839 set exclusively by configure, using configure.in .
10841 Wed Jan 6 13:44:11 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
10843 * test-build.mk: set $PATH for all builds
10845 * Makefile.in: pass TARGET_FLAGS_TO_PASS for xiberty and libm
10849 * Makefile.in (GCC_FOR_TARGET): Supply a default that matches
10850 the one used in gcc/Makefile.in, so that a null expansion doesn't
10851 override the one needed to build gcc with a native cc.
10856 * configure: Accept -with arguments.
10860 * Makefile.in: added h8300sim
10864 * build-all.mk: If canonhost is i386-unknown-sco3.2v4, change it
10865 to i386-sco3.2v4. Set TARGETS and CFLAGS for i386-sco3.2v4.
10866 (all-cygnus, native, build-cygnus): Make
10867 $(canonhost)-stamp-3stage-done, not $(host)....
10868 * test-build.mk (stamp-3stage-compared): Use tail +10c for
10869 i386-sco3.2v4. Added else true to if command.
10873 * config.sub: (from FSF) Sequent uses a BSD-like OS.
10877 * configure.in (i[34]86-*-isc*): added; uses mh-sysv.
10879 Thu Dec 24 17:26:24 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
10881 * configure.in: don't remove binutils from Solaris builds
10885 * Makefile.in: get rid of earlier definitions for *clean,
10886 also handle the recursive info rule better
10890 * Makefile.in (mostlyclean, distclean, realclean): Fix to
10891 do more-or-less the right thing.
10895 * Makefile.in: Add lines defining CC and CXX, and use CXX rather
10896 than gcc in definitions of CXX_FOR_BUILD and CXX_FOR_TARGET.
10898 Tue Dec 15 00:34:32 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
10900 * Makefile.in: change all $(host_cpu)-$(host_vendor)-$(host_os) to
10903 * configure.in: split the configdirs list into 4 categories (native
10904 v. cross, library v. tool) and handle the cross-only and native-
10905 only in more reasonable (and correct!) way.
10907 Mon Dec 14 17:04:22 1992 Stu Grossman (grossman at cygnus.com)
10909 * configure.in (hppa*-*-*): Don't remove bfd and gdb from
10910 configdirs anymore.
10912 Sun Dec 13 00:37:26 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
10914 * Makefile.in: extensive cleanup:: removed all of the explicit
10915 clean-* targets, collapsed many wrappers around subdir_do into
10916 one, added additional targets to satisfy standards.texi, deleted
10917 some old targets, some changes for consistency
10919 Fri Dec 11 20:18:02 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
10921 * configure.in: handle some programs as cross-only, and others as
10924 * test-build.mk: handle partial holes in a more generic manner
10926 * Makefile.in: m4 depends on libiberty
10928 Thu Dec 3 21:52:11 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
10930 * configure.in: add m4, textutils, fileutils, sed, shellutils,
10931 time, wdiff, and find to configdirs
10933 * Makefile.in: all, clean, and install rules for the new programs
10934 added to configure.in
10936 Mon Nov 30 14:54:34 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
10938 * configure.in: use mh-sun for all *-sun-* hosts
10940 Fri Nov 27 18:35:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
10942 * Makefile.in: define flags for X11 include files and library file
10943 locations, pass them down to the programs that need this info
10945 * build-all.mk: added a 'native' target, to 3stage the native toolchain
10947 Sun Nov 22 18:59:13 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
10949 * configure.in: start building libg++ for HP-UX targets
10953 * README: Update references to files moved into etc/.
10957 * config.sub (i386sol2, i486sol2): i[34]86-unknown-solaris2.
10958 * configure.in (i[34]86-*-solaris2*): Use config/mh-sysv4.
10962 * configure: accept dash as well as underscore in long option
10963 names for FSF compatibility.
10967 * config.sub: added -sco3.2v4 support from FSF.
10969 Sun Nov 8 21:14:30 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
10971 * configure.in: expand the section that adds or removes
10972 directories from the list of programs to build, to handle native
10973 vs. cross in addition to host v. native
10977 * Makefile.in: Replace C++ in macro names with CXX.
10978 This is less likely to break ...
10980 Sat Nov 7 15:16:58 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
10982 * test-build.mk: add -w to GNU_MAKE
10984 Fri Nov 6 23:10:37 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
10986 * config.sub: remove 'sparc'-->'sparc-sun' default transformation,
10987 add 'sparc' to list of recognized cpus. This needed to make
10988 'sparc-aout' expand to 'sparc-unknown-aout' instead of 'sparc-sun-aout'.
10989 Delete some redundant ose68 variants. Recognize -wrs as an os,
10990 then changes that into $CPU-wrs-vxworks.
10992 * configure.in: remove most references to gdbtest, regularize
10993 target based program removal
10995 * test-build.mk: import from p3 tree (many fixes and changes)
10999 * Makefile.in: added rules to handle tcl, tk, and expect
11001 * configure.in: handle those directories if they exist
11003 Thu Nov 5 14:35:41 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
11005 * config.sub: removed bogus hppabsd and hppahpux names, since
11006 "hppa" is not a valid cpu (hppa1.1 or hppa1.0 are, though)
11008 Thu Oct 29 00:12:41 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
11010 * Makefile.in: all-gcc now depends on all-binutils. all-libg++
11011 depends upon all-xiberty
11013 * Makefile.in: changes from p3, including:
11017 * Makefile.in (XTRAFLAGS): include newlib directories if
11018 newlib/Makefile exists, rather than if host != target.
11022 * Makefile.in: added -nostdinc to XTRAFLAGS if we are using gcc
11023 from the same source tree and not building a cross-compiler. This
11024 matters for the libg++ configuration if reconfiguring a tree that
11025 has already been installed.
11029 * Makefile.in: added -I for newlib/targ-include to XTRAFLAGS, to
11030 pick up the machine and system specific header files.
11032 * Makefile.in: added AS_FOR_TARGET, passed down in
11033 TARGET_FLAGS_TO_PASS. Added CC_FOR_BUILD, which is intended to be
11034 the C compiler to use to create programs which are run in the
11035 build environment, set it to default to $(CC), and passed it down
11036 in FLAGS_TO_PASS and TARGET_FLAGS_TO_PASS.
11040 * Makefile.in: add $(host) = $(target) tests back to *_FOR_TARGET.
11041 We need them for unusual native builds, like systems without
11044 * configure: also define $(host_canonical) and
11045 $(target_canonical), which are the full, canonical names for the
11046 given host and target
11050 * Makefile.in: Added separate definitions for C++.
11054 * configure.in (configdirs): Add deja-gnu.
11058 * README: Update for configure.texi and gdb-4.7 release.
11062 * Makefile.in: Move "all" target to top of file.
11063 Previously, first target was ".PHONY" which caused BSD4.4 make
11064 to build .PHONY when make was run without arguments.
11068 * Makefile.in: Add COPYING.LIB to GDB releases, now that there's
11069 Library-copylefted code in libiberty.
11073 * config.sub: Replace m68kmote with plain old m68k.
11077 * Makefile.in: Remove space from blank line, avoid Make complaints.
11081 * config.sub: Complain if no argument is given. Added support for
11082 386bsd as OS and target alias.
11086 * Makefile.in (XTRAFLAGS): include newlib directories if
11087 newlib/Makefile exists, rather than if host != target.
11089 Mon Oct 5 03:00:09 1992 Mark Eichin (eichin at tweedledumber.cygnus.com)
11091 * config.sub: recognize sparclite-wrs-vxworks.
11093 * Makefile.in (install-xiberty): added *-xiberty make rules (from
11094 p3.) Added clean-xiberty to clean.
11096 Thu Oct 1 17:59:19 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
11098 * configure.in: use *-*-* instead of nested cases for host and target
11102 * Makefile.in: added -nostdinc to XTRAFLAGS if we are using gcc
11103 from the same source tree and not building a cross-compiler. This
11104 matters for the libg++ configuration if reconfiguring a tree that
11105 has already been installed.
11109 * config.sub (i486v/i486v4): Merge in from FSF version.
11113 * configure: only set PWD if it is already set.
11117 * configure: just set PWD=`pwd` at the top, since Ultrix sh
11118 doesn't have unset and all success paths (and most error paths)
11119 out set it anyway. (Note: should change all uses of ${PWD=`pwd`}
11120 to just ${PWD} to avoid confusion.)
11124 * configure: always set $(tooldir) to $(libdir)/$(target_alias),
11125 even for a native compilation.
11129 Changes to make the gdb.tar.Z rule work better.
11131 * Makefile.in (GDB_SUPPORT_DIRS): Add opcodes.
11132 (DEVO_SUPPORT): Add configure.texi.
11133 (bfd-ilrt.tar.Z): Remove ancient rule.
11137 * Makefile.in: added -I for newlib/targ-include to XTRAFLAGS, to
11138 pick up the machine and system specific header files.
11140 * configure.in, config.sub: added new target m68010-adobe-scout,
11141 with alias of adobe68k. Changed configure.in to check for
11142 -scout before -sco* to avoid a false match.
11144 * Makefile.in: added AS_FOR_TARGET, passed down in
11145 TARGET_FLAGS_TO_PASS. Added CC_FOR_BUILD, which is intended to be
11146 the C compiler to use to create programs which are run in the
11147 build environment, set it to default to $(CC), and passed it down
11148 in FLAGS_TO_PASS and TARGET_FLAGS_TO_PASS.
11152 * Makefile.in: added TARGET_FLAGS_TO_PASS, CC_FOR_TARGET,
11153 AR_FOR_TARGET, RANLIB_FOR_TARGET, NM_FOR_TARGET. Pass
11154 TARGET_FLAGS_TO_PASS, which defines CC, AR, RANLIB and NM as the
11155 FOR_TARGET variants, to newlib and libg++.
11159 * Makefile.in (all-gas, all-gdb): Require all-opcodes to be built
11164 * config.sub: Accept `elf' as an environment.
11168 * Makefile.in (all-opcodes): cd into the right directory
11172 * configure: added -program_transform_name option, used as
11173 argument to sed when installing programs.
11174 configure.texi: added documentation for -program_prefix,
11175 -program_suffix and -program_transform_name.
11179 * config.sub: Accept i486 where i386 ok.
11183 * config.sub: accept we32k
11187 * config.sub, configure.in: accept OSE68000 and OSE68k.
11189 * Makefile.in: don't create all directories for ``make install'';
11190 let the subdirectories create the ones they need.
11192 Tue Aug 11 23:13:17 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
11194 * COPYING: new file, GPL v2
11196 Tue Aug 4 01:12:43 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
11198 * Makefile.in: use the new gen-info-dir, which needs a template
11199 argument (which also lives in texinfo)
11201 * configure.texi, standards.texi: fix INFO-DIR-ENTRY
11205 * config.sub (ncr3000): Change i386 to i486.
11207 Thu Jul 23 00:12:17 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
11209 * Makefile.in: add install-rcs, install-grep to
11210 install-no-fixedincludes, removed install-bison and install-libgcc
11214 * configure.in: grab the HPUX makefile fragment if on HPUX
11218 * Makefile.in: eradicate bison spoor (ditto libgcc).
11219 configure.in: recognise m68{k,000}-ericsson-OSE.
11220 es1800 is alias for m68k-ericsson-OSE
11222 Sun Jul 19 17:49:02 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
11224 * configure.in: rearrange the parts that remove programs from
11225 configdirs, based now on HOST==TARGET or by canonical triple.
11229 * test-build.mk: recurse explicitly with -f test-build.mk when
11230 appropriate. predicate stage3 and comparison on the existence
11231 of gcc. That is, if gcc isn't around, we aren't three-staging.
11232 On very clean, also remove ...stamp-co. Build in-place before
11233 doing other builds.
11237 * Makefile.in, configure.in: add tgas
11241 * Makefile.in: a number of changes merged in from progressive.
11243 * configure.in: add libm.
11245 * .cvsignore: ignore some stuff that comes from test-build.mk.
11249 * config.sub: Add es1800 (m68k-ericsson-es1800).
11253 * configure: Add program_suffix (parallel to program_prefix)
11254 * Makefile.in: adjust directory-creating script for losing decstation
11258 * configure: Minor $subdir-related fixes.
11262 * configure: fix various problems with propogating
11263 makefile_target_frag in subdirs.
11264 * configure.in: config libgcc if its there
11266 Fri Jun 19 15:19:40 1992 Stu Grossman (grossman at cygnus.com)
11268 * config.sub: HPPA merge.
11270 Sun Jun 14 10:29:19 1992 John Gilmore (gnu at cygnus.com)
11272 * Makefile.in: Replace all-bison with all-byacc in all
11273 dependency lines for other tools (which now use byacc).
11275 Fri Jun 12 22:21:57 1992 John Gilmore (gnu at cygnus.com)
11277 * config.sub: Add sun4sol2 => sparc-sun-solaris2.
11281 * Makefile.in: make gprof rules similar to byacc rules (instead of
11282 vestigal $(unsubdir) that didn't work...)
11286 * config.sub: Add support for Linux.
11287 * Makefile.in: Use $(FLAGS_TO_PASS) more consistently
11288 (at least for libg++).
11292 * configure.texi: fix doc for the -nfp option to configure
11296 * Makefile.in (all-binutils): ar needs flex, so depend on all-flex.
11298 Sun May 31 15:04:08 1992 Mark Eichin (eichin at cygnus.com)
11300 * config.sub: changed [^-]+ to [^-][^-]* so that it works under
11301 Sun sed. (BSD 4.3 sed doesn't handle [^-]+ either.)
11302 * configure.in: added solaris* host_makefile_frag hook.
11304 Sun May 31 01:10:34 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
11306 * config.sub: changed recognition of m68000 so that various
11307 m68k types can be specified via m680[01234]0
11309 Sat May 30 21:01:06 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
11311 * config.sub (basic_machine): fix sed so that '-foo' isn't
11312 completely substituted out while .+'-foo' loses the '-foo'
11316 * config.sub ($os): Add -aout.
11320 * configure: If host_makefile_frag is absolute, don't
11321 prefix ${invsubdir} (relevant to libg++ auto-configure).
11325 * Makefile.in (tooldir): Define it.
11326 (all-ld): Depend on all-flex.
11330 * Makefile.in (check): Fix libg++ special case.
11334 * configure: do not bury `pwd` into config.status, thus do fewer
11337 * configure: print the "Building in" message only when building in
11338 other than "." AND verbose.
11340 * configure: remove -s, rework -v to better accomodate guested
11343 * standards.texi: updated to 3 may, fixed librid <-> libdir typo.
11347 * Makefile.in: macroize flags passed on recursion. remove
11352 * configure: get makesrcdir right for subdirs deeper than 1.
11354 * Makefile.in: pass INSTALL, INSTALL_DATA, INSTALL_PROGRAM on
11359 * Makefile.in: don't print subdir_do or recursion lines.
11363 * standards.texi: added menu item.
11365 * Makefile.in: build and install standards.info.
11367 * standards.texi: new file.
11371 * configure: test for and move config.status pieces from
11376 * configure: Test for existance of files before trying to mv
11377 them, to avoid numerous non-existance messages.
11381 * configure: correct final line of config.status.
11383 * configure: patch from eggert. Avoids a protection problem if
11384 the original Makefile.in is read only.
11386 * configure: use move-if-change from gcc to create config.status.
11387 Some makefiles depend on config.status to tell if a directory
11388 has been reconfigured for a different host. This change
11389 prevents those directories from remaking everything in the case
11390 where the reconfig was only intended to rebuild a Makefile.
11392 * configure: test for config.sub with "config.sub sun4" rather
11393 than "config.sub ${host_alias}". Otherwise we can't tell a bad
11394 host alias from a missing config.sub.
11398 * Makefile.in: explicitly pass CFLAGS on recursion. no longer pass
11399 MINUS_G (this can be done with CFLAGS). Default CFLAGS to -g.
11403 * configure: mkdir ${subdir} as needed.
11407 * Makefile.in,configure.in: added autoconf.
11411 * Makefile.in: no longer pass against on recursion.
11413 * Makefile.in: added .NOEXPORT: so that stray makefile_frag
11414 definitions are not inherited.
11416 * configure: correct makesrcdir when subdir is .
11420 * configure: Add support for 'subdirs' variable, which is
11421 like 'configdirs', except that configure doesn't re-invoke
11422 itself for subdirs, it just creates a Makefile for each subdir.
11423 * configure.texi: Document subdirs.
11425 Mon Apr 13 18:50:16 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
11427 * configure.in: added flex to configdirs
11431 * Makefile.in: remove clean-stamps from clean.
11433 Sat Apr 11 03:52:03 1992 John Gilmore (gnu at cygnus.com)
11435 * configure.in: Add gdbtest to configdirs.
11439 * Makefile.in (MINUS_G): Add macro, default to -g, pass on
11440 to recursive makes.
11441 * configure.in: Recognize new ncr3000 config.
11445 * Makefile.in, configure.in: removed references to gdbm.
11449 * config.sub: Don't canonicalize os value
11450 newsos* to bsd (readline needs to check for newsos).
11451 (This fix was earlier made Jan 31, but got re-broken.)
11453 Mon Apr 6 14:34:08 1992 Stu Grossman (grossman at cygnus.com)
11455 * configure.in: sco is an os, not a vendor!
11457 * configure: Quote $( better. Keep various shells happy.
11461 * Makefile.in: eliminate stamp-files.
11465 * Makefile.in: add send_pr. remove "force" from .stmp-gprof rule.
11466 Supress echoing of all the "if [ -d ... $(MAKE)" lines.
11470 * config.sub: fix iris/iris3.
11474 * configure: re-add -rm.
11478 * Maskefile.in: add .stmp-rcs to all.
11480 * configure.in: remove gas from rs6000 build, use aix host fragment.
11484 * configure: pass down site_option during recursion.
11486 Thu Mar 19 16:49:36 1992 Stu Grossman (grossman at cygnus.com)
11488 * Makefile.in (all.cross): Add .stmp-bfd .stmp-readline.
11492 * configure: Change exec_prefix so that it really defaults to prefix.
11496 * Makefile.in, configure.in: Add support for mmalloc library.
11500 * Makefile.in: add stmp dependencies for a few more things.
11504 * configure: adjusted error message on objdir/srcdir configure
11505 collision, per john's suggestion.
11507 * Makefile.in: add libiberty stmp to all and all.cross.
11511 * Makefile.in: remove force dependencies, add grep to all.
11515 * Makefile.in: drop flex. make stamp files work.
11517 * configure: added test for conflicting configuration in srcdir,
11518 remove trailing slashes from srcdir. Otherwise emacs gdb mode
11519 gets cranky. use relative paths for configure and srcdir
11520 whenever possible. Send some error messages to stderr that were
11525 * Makefile.in: Fix libg++ rule to check for gcc directory
11526 before using gcc/gcc. Also pass XTRAFLAGS.
11528 Thu Mar 5 21:45:07 1992 K. Richard Pixley (rich@sendai)
11530 * Makefile.in: added stmp-files so that directories aren't polled
11531 when they are already built.
11533 * configure.texi: fixed a node pointer problem.
11535 Thu Mar 5 12:05:58 1992 Stu Grossman (grossman at cygnus.com)
11537 * config.sub configure.in gdb/configure.in
11538 gdb/mips-tdep.c gdb/mipsread.c gdb/procfs.c gdb/signame.h
11539 gdb/tm-irix3.h gdb/tm-mips.h gdb/xm-irix4.h gdb/config/mt-irix3
11540 gdb/config/mh-irix4 texinfo/configure.in: Port to SGI Irix-4.x.
11544 * configure: -recurring becomes -silent. corrected help message
11547 * Makefile.in: mkdir $(exec_prefix) and $(tooldir).
11551 * configure: when building Makefile for crosses, replace
11552 tooldir and program_prefix. default srcdir from location of
11553 config.sub. remove "for host in hosts" and "for target in
11558 * Makefile.in: Do not pass bindir or mandir to cvs.
11562 * Makefile.in, configure.in: removed traces of namesubdir,
11563 -subdirs, $(subdir), $(unsubdir), some rcs triggers. Forced
11564 copyrights to '92, changed some from Cygnus to FSF.
11566 * configure.texi: remove most references to multiple hosts,
11567 multiple targets, subdirs, etc.
11569 * configure.man: removed rcsid. reference config.sub not
11572 * Makefile.in: mkdir $(infodir) on install-info.
11574 Wed Feb 19 15:41:13 1992 John Gilmore (gnu at cygnus.com)
11576 * configure.texi: Explain better about .gdbinit and about
11577 the environment that configure.in sections run in.
11579 Fri Feb 7 07:55:00 1992 John Gilmore (gnu at cygnus.com)
11581 * configure.in: Ultrix is only a decstation if it's a MIPS.
11583 Fri Jan 31 21:54:51 1992 John Gilmore (gnu at cygnus.com)
11585 * README: DOC.configure => cfg-paper.texi.
11587 Fri Jan 31 21:48:18 1992 Stu Grossman (grossman at cygnus.com)
11589 * config.sub (near case $os): Don't convert newsos* to bsd!
11591 Fri Jan 31 02:27:32 1992 John Gilmore (gnu at cygnus.com)
11593 * Makefile.in: Reinstall change from gdb-4.3 that reduces
11594 the number of copies of COPYING that go into the GDB tar file.
11596 Thu Jan 30 16:17:30 1992 Stu Grossman (grossman at cygnus.com)
11598 * bfd/configure.in, gdb/config/mh-i386sco,
11599 gdb/config/mt-i386v32, gdb/configure.in, readline/configure.in:
11600 Fix SCO configuration stuff.
11602 Tue Jan 28 23:51:07 1992 Per Bothner (bothner at cygnus.com)
11604 * Makefile.in: For libg++, make sure the -I pointing
11605 to the gcc directory goes *after* all the libg++-local -I flags.
11606 Also, move just-gcc dependency from just-libg++ to all-libg++.
11608 Tue Jan 28 12:56:24 1992 Stu Grossman (grossman at cygnus.com)
11610 * configure: Change -x to -f to keep Ultrix /bin/test happy.
11612 Sat Jan 18 17:45:11 1992 Stu Grossman (grossman at cygnus.com)
11614 * Makefile.in (make-gdb.tar.Z): Remove texinfo targets.
11616 Sat Jan 18 17:03:21 1992 Fred Fish (fnf at cygnus.com)
11618 * config.sub: Add stratus configuration frags. Also
11621 Sat Jan 18 15:35:29 1992 Stu Grossman (grossman at cygnus.com)
11623 * Makefile.in (DEV_SUPPORT): add configure.man.
11625 * config.sub(Decode manufacturer-specific): add -none*.
11627 Fri Jan 17 17:58:05 1992 Stu Grossman (grossman at cygnus.com)
11629 * Makefile.in: remove form feeds to make Sun's make happy.
11630 (DEVO_SUPPORT): DOC.configure => cfg-paper.texi.
11632 Sat Jan 4 16:11:44 1992 John Gilmore (gnu at cygnus.com)
11634 * Makefile.in (AR_FLAGS): Make quieter.
11636 Thu Jan 2 22:57:12 1992 John Gilmore (gnu at cygnus.com)
11638 * configure.in: Add libg++.
11639 * configure: When verbose, don't output the command line at each
11640 level; it will be unremarkably the same as the previous version,
11641 which will be the same as what the user typed.
11643 Fri Dec 27 16:26:47 1991 K. Richard Pixley (rich at cygnus.com)
11645 * configure.in, Makefile.in: fix clean-info, add flex. add
11648 * configure: be less sensitive to spaces in Makefile.in. Do not
11649 look for sources in "..". Doing so breaks subdirectories that
11650 might have their own configure. If a subdir has it's own
11651 configure script, use it.
11653 Thu Dec 26 16:30:26 1991 K. Richard Pixley (rich at cygnus.com)
11655 * cfg-paper.texi: some changes suggested by rms.
11657 Thu Dec 26 10:13:36 1991 Fred Fish (fnf at cygnus.com)
11659 * config.sub: Merge in some small additions from the FSF version,
11660 taken from the gcc distribution, to bring the Cygnus and FSF
11661 versions into closer sync.
11663 Fri Dec 20 11:34:18 1991 Fred Fish (fnf at cygnus.com)
11665 * configure.in: Changed svr4 references to sysv4.
11667 Thu Dec 19 15:54:29 1991 K. Richard Pixley (rich at cygnus.com)
11669 * configure: added -V for version number option.
11671 Wed Dec 18 15:39:34 1991 K. Richard Pixley (rich at cygnus.com)
11673 * DOC.configure, cfg-paper.texi: revised, updated, and texinfo'd.
11674 renamed from DOC.configure to cfg-paper.texi.
11676 Mon Dec 16 23:05:19 1991 K. Richard Pixley (rich at rtl.cygnus.com)
11678 * configure, config.subr, config.sub: config.subr is now
11681 Fri Dec 13 01:17:06 1991 K. Richard Pixley (rich at cygnus.com)
11683 * configure.texi: new file, in progress.
11685 * Makefile.in: build info file and install the man page for
11688 * configure.man: new file, first cut.
11690 * configure: find config.subr again now that configuration "none"
11691 has gone. removed all traces of the -ansi option. removed all
11692 traces of the -languages option.
11694 * config.subr: resync from rms.
11696 1991-12-11 K. Richard Pixley (rich at rtl.cygnus.com)
11698 * configure, config.sub, config.subr: merge config.sub into
11699 config.subr, call the result config.subr, remove config.sub, use
11702 * Makefile.in: revised install for dir.info.
11704 1991-12-10 K. Richard Pixley (rich at rtl.cygnus.com)
11706 * configure.in: add decstation host makefile frag.
11708 * Makefile.in: BISON now bison -y again. also install-gcc on
11709 install. clean-gdbm on clean. infodir belongs in datadir.
11710 Make directories for info install. Build dir.info here then
11713 1991-12-09 K. Richard Pixley (rich at rtl.cygnus.com)
11715 * Makefile.in: fix for bad directory tests.
11717 1991-12-07 K. Richard Pixley (rich at rtl.cygnus.com)
11719 * configure: \{1,2\} appears to be a sysv'ism. Use a different
11720 regexp. -srcdir relative was being handled incorrectly.
11722 * Makefile.in: unwrapped some for loops so that parallel makes
11723 work again and so one can focus one's attention on a particular
11726 1991-12-06 K. Richard Pixley (rich at rtl.cygnus.com)
11728 * configure: added PWD as a stand in for `pwd` (for speed). use
11729 elif wherever possible. make -srcdir work without -objdir.
11730 -objdir= commented out.
11732 1991-12-05 K. Richard Pixley (rich at rtl.cygnus.com)
11734 * configure: +options become --options. -subdirs commented out.
11735 added -host, -datadir. Renamed -destdir to -prefix. Comment in
11736 Makefile now at top of generated Makefile. Removed cvs log
11737 entries. added -srcdir. create .gdbinit only if there is one
11740 * Makefile.in: idestdir and ddestdir go away. Added copyrights
11741 and shift gpl to v2. Added ChangeLog if it didn't exist. docdir
11742 and mandir now keyed off datadir by default.
11744 1991-11-22 K. Richard Pixley (rich at rtl.cygnus.com)
11746 * Freshly created ChangeLog.
11753 version-control: never