3 Clean up the D10V port so that GDB and the target program no
4 longer disagree on how big pointers are.
5 * findvar.c (value_from_register): Remove special case code for D10V.
6 * printcmd.c (print_frame_args): Same.
7 * valops.c (value_at, value_fetch_lazy): Same.
8 * values.c (unpack_long): Same.
9 * gdbarch.sh: Changes to effect the following:
10 * gdbarch.h (GDB_TARGET_IS_D10V, D10V_MAKE_DADDR,
11 gdbarch_d10v_make_daddr_ftype, gdbarch_d10v_make_daddr,
12 set_gdbarch_d10v_make_daddr, D10V_MAKE_IADDR,
13 gdbarch_d10v_make_iaddr_ftype, gdbarch_d10v_make_iaddr,
14 set_gdbarch_d10v_make_iaddr, D10V_DADDR_P,
15 gdbarch_d10v_daddr_p_ftype, gdbarch_d10v_daddr_p,
16 set_gdbarch_d10v_daddr_p, D10V_IADDR_P,
17 gdbarch_d10v_iaddr_p_ftype, gdbarch_d10v_iaddr_p,
18 set_gdbarch_d10v_iaddr_p, D10V_CONVERT_DADDR_TO_RAW,
19 gdbarch_d10v_convert_daddr_to_raw_ftype,
20 gdbarch_d10v_convert_daddr_to_raw,
21 set_gdbarch_d10v_convert_daddr_to_raw, D10V_CONVERT_IADDR_TO_RAW,
22 gdbarch_d10v_convert_iaddr_to_raw_ftype,
23 gdbarch_d10v_convert_iaddr_to_raw,
24 set_gdbarch_d10v_convert_iaddr_to_raw): Delete declarations.
25 * gdbarch.c: Delete the corresponding definitions.
26 (struct gdbarch): Delete members d10v_make_daddr,
27 d10v_make_iaddr, d10v_daddr_p, d10v_iaddr_p,
28 d10v_convert_daddr_to_raw, and d10v_convert_iaddr_to_raw.
29 (startup_gdbarch): Remove initializers for the above.
30 (verify_gdbarch, gdbarch_dump): Don't verify or dump them any
32 * d10v-tdep.c (d10v_register_virtual_type): Rather that
33 claiming the stack pointer and PC are 32 bits long (which they
34 aren't), say that the stack pointer is an int16_t, and the
35 program counter is a function pointer. This allows the rest
36 of GDB to make the appropriate conversions between the code
37 pointer format and real addresses.
38 (d10v_register_convertible, d10v_register_convert_to_virtual,
39 d10v_register_convert_to_raw): Delete function; no registers
40 are convertible now, so we use
41 generic_register_convertible_not instead.
42 (d10v_address_to_pointer, d10v_pointer_to_address): New gdbarch
44 (d10v_push_arguments, d10v_extract_return_value): Remove special
45 cases for code and data pointers.
46 (d10v_gdbarch_init): Set gdbarch_ptr_bit to 16, so that GDB and
47 the target agree on how large pointers are. Say that addresses
48 are 32 bits long. Register the address_to_pointer and
49 pointer_to_address conversion functions. Since no registers are
50 convertible now, register generic_register_convertible_not as the
51 gdbarch_register_convertible method instead of
52 d10v_register_convertible. Remove registrations for
53 d10v_register_convert_to_virtual,
54 d10v_register_convert_to_raw, gdbarch_d10v_make_daddr,
55 gdbarch_d10v_make_iaddr, gdbarch_d10v_daddr_p,
56 gdbarch_d10v_iaddr_p, gdbarch_d10v_convert_daddr_to_raw, and
57 gdbarch_d10v_convert_iaddr_to_raw.
59 * printcmd.c (print_scalar_formatted): If we are printing an
60 address, remember that TARGET_ADDR_BIT is not always equal to
63 * valops.c (value_cast): When casting a pointer to an integer,
64 don't convert it to an address.
68 * remote-utils.h (struct serial): Declare as opaque. Remove
69 include of "serial.h".
70 * Makefile.in (remote_utils_h): Update.
72 * monitor.h (struct serial): Declare as opaque. Remove include of
74 (struct monitor_ops): Replace serial_t with `struct serial *'.
75 * monitor.c (monitor_desc): Ditto.
79 * mips-linux-tdep.c: New file.
80 * mips-linux-nat.c: New file.
81 * config/mips/linux.mh: New file.
82 * config/mips/linux.mt: New file.
83 * config/mips/xm-linux.h: New file.
84 * config/mips/nm-linux.h: New file.
85 * config/mips/tm-linux.h: New file.
86 * configure.host: Recognize mips*-*-linux*.
87 * configure.tgt: Likewise.
88 * NEWS: Mention mips*-*-linux* port.
92 * serial.h (struct serial): Rename `struct _serial_t'.
93 * serial.c (XMALLOC): Define.
94 (serial_open): Update. Use XMALLOC.
95 (serial_fdopen): Ditto.
99 * gdbtypes.h (builtin_type_void_data_ptr): Rename
101 * gdbtypes.c (builtin_type_void_data_ptr): Update.
102 (build_gdbtypes): Update.
103 (_initialize_gdbtypes): Update.
104 * values.c (value_as_pointer): Update.
105 * utils.c (host_pointer_to_address): Update.
106 (address_to_host_pointer): Update.
110 * remote-udi.c (udi_wait): Make type, instead of name, of first
115 * ser-mac.c: Make obsolete.
116 * Makefile.in (ser-mac.o): Ditto.
120 * go32-nat.c (go32_get_windows_version, print_mem, go32_sysinfo)
121 (read_memory_region, get_descriptor, display_descriptor)
122 (go32_sldt, go32_sgdt, go32_sidt): New functions.
123 (top-level): Include ctype.h, utsname.h, dos.h, and go32.h. Ifdef
124 away `disable' from dos.h, since breakpoint.h defines an enum
125 member of the same name, and GCC 2.7.2 barfs.
126 (_initialize_go32_nat): Provide new commands dos-sysinfo, dos-ldt,
127 dos-gdt, and dos-idt, all of them in the "info" class
131 * procfs.c (create_procinfo): Allocate space for saved_entryset
133 (destroy_one_procinfo): Free space allocated to saved_entryset
138 * TODO (5.1): Update.
142 * symtab.c (main_name): New function.
143 (set_main_name): New function.
148 * dbxread.c (process_one_symbol): Handle the N_MAIN stab by
150 * blockframe.c (inside_main_func): Use main_name instead of
152 * symtab.c (find_main_psymtab): Ditto.
153 * source.c (select_source_symtab): Ditto.
154 * nlmread.c (nlm_symfile_read): Ditto.
155 * rs6000-tdep.c (skip_prologue): Ditto.
159 * TODO: Convert most items into PRs.
163 * lin-lwp.c (status_to_str): New function.
164 (lin_lwp_wait): Use it to print debug messages where appropriate.
168 * i387-tdep.c (print_i387_value): Fix pointer glitch.
172 * lin-lwp.c (count_events_callback): Fix formatting. Turn check
173 commented with "paranoia" into gdb_assert.
174 (select_event_lwp_callback): Likewise.
175 (cancel_breakpoints_callback): Bail out early if LP is the event
176 LWP. Add comment about backup up breakpoints. Fix formatting and
178 (select_event_lwp): Make solely repsonsible for switching event
179 LWP. Fix formatting and remove bogus "ERROR" debug message.
180 Don't backup breakpoints from here.
181 (lin_lwp_wait): Don't touch LP->status, let select_event_lwp
182 handle that. Only call select_event_lwp if we're not waiting for
183 a specific LWP, i.e. when PID == -1. Backup breakpoints from here.
187 * procfs.c (procfs_resume): Silence noisy warning.
191 * lin-lwp.c: Prevent thread starvation by using a monte carlo
192 method to choose which of several event threads to handle next.
194 (stop_wait_callback): Defer pushback of breakpoint events until
195 later; add SIGTRAP events to the queue of unhandled events.
196 Keep calling waitpid until SIGSTOP retrieved. If more than one
197 non-SIGSTOP event is retrieved, push them back onto the process
199 (count_events_callback, select_singlestep_lwp_callback,
200 select_event_lwp_callback, cancel_breakpoints_callback,
201 select_event_lwp): New functions. Implement monte carlo method
202 for selecting which of several SIGTRAP threads to handle next.
203 Push back the breakpoint event for all threads other than the
205 (lin_lwp_wait): Call select_event_lwp to decide which of several
206 sigtrapped lwps to handle next.
207 (resume_callback): Disable code that attempts to handle
208 step_resume breakpoints. Let core gdb handle this.
212 * gdbtypes.h (builtin_type_void_func_ptr): New builtin type.
213 * gdbtypes.c (builtin_type_void_func_ptr): Define the variable.
214 (build_gdbtypes): Initialize it.
215 (_initialize_gdbtypes): Swap it.
219 * mips-tdep.c (mips32_op): Correct offset.
220 (itype_op): Likewise.
221 (itype_rs): Fix formatting.
222 (itype_immediate): Fix formatting.
223 (jtype_op): Correct offset.
224 (jtype_target): Fix formatting.
225 (rtype_op): Correct offset.
226 (rtype_rs): Fix formatting.
227 (rtype_rt): Likewise.
228 (rtype_rd): Likewise.
229 (rtype_shamt): Likewise.
230 (rtype_funct): Likewise.
232 (mips32_next_pc): Fix formatting and comments. Recognize
233 coprocessor 1 branches. Check the correct field for BLT family
234 branches. Use itype_rt instead of itype_rs for the second register
235 of a BNE or BNEL branch. Move (unreachable) default case.
239 * ui-out.h (struct ui_out_impl): Add field is_mi_like_p.
240 (ui_out_is_mi_like_p): Declare.
241 * ui-out.c (ui_out_is_mi_like_p): Define.
242 (default_ui_out_impl): Initialize is_mi_like_p to zero.
243 * cli-out.c (cli_ui_out_impl): Ditto.
244 * breakpoint.c (print_it_typical): Use ui_out_is_mi_like_p.
245 (watchpoint_check, print_one_breakpoint, mention): Ditto.
246 * infrun.c (print_stop_reason, normal_stop): Ditto.
250 * mips-tdep.c (mips_software_single_step): New function.
251 * config/mips/tm-mips.h: Add prototype for
252 mips_software_single_step.
256 * ppc-linux-nat.c (supply_gregset): Use elf_greg_t instead
258 (fill_gregset): Likewise.
262 * objfiles.c (open_mapped_file): Use lbasename instead of
267 * d10v-tdep.c (d10v_frame_chain, d10v_frame_init_saved_regs,
268 show_regs, d10v_read_pc, d10v_write_pc, d10v_read_sp,
269 d10v_write_sp, d10v_write_fp, d10v_read_fp,
270 d10v_push_return_address): Call the functions d10v_make_daddr,
271 d10v_make_iaddr, d10v_convert_iaddr_to_raw, and
272 d10v_convert_daddr_to_raw, not the global macros D10V_MAKE_DADDR,
273 D10V_MAKE_IADDR, D10V_CONVERT_IADDR_TO_RAW, and
274 D10V_CONVERT_DADDR_TO_RAW.
276 * dwarf2read (dwarf2_build_psymtabs_hard): Doc fix.
280 * config/i386/xm-go32.h (HOST_I386): Removed.
281 * config/i386/xm-linux.h (HOST_I386): Removed.
285 * i387-tdep.c (print_i387_value): Add extra space after final full
290 * TODO (5.1): Update. Doco changes committed.
294 * config/arm/tm-arm.h: Include "floatformat.h".
298 * i387-tdep.c: Include "gdb_assert.h".
299 (print_i387_value): Use extract_floating to extract the FP value
300 from a zero padded local buffer.
304 * TODO: Delete all thread items. The thread code was overhauled.
308 * memattr.c (create_mem_region): Move n to next memory region,
309 to avoid infinite loop.
311 * memattr.h: Add copyright statement.
316 * dwarf2read.c (struct partial_die_info): New member: has_pc_info.
317 (read_partial_die): Delete fourth argument; we return this info in
318 the struct partial_die_info object itself now.
319 (dwarf2_build_psymtabs_hard, scan_partial_symbols): Use the
320 has_pc_info field of the partial die struct, rather than passing a
321 variable by reference to read_partial_die.
323 * dwarf2read.c (dwarf2_build_psymtabs_hard): Remove extraneous
324 code in loop condition.
328 * thread_db (find_new_threads_callback, thread_db_thread_alive,
329 attach_thread): Update comments.
333 * thread-db.c (attach_thread): Check for TD_THR_ZOMBIE in addition
334 to TD_THR_UNKNOWN when looking for defunct zombie threads.
335 (thread_db_thread_alive): Ditto.
336 (find_new_threads_callback): Ditto.
340 * MAINTAINERS: Add myself to the write-after-approval list.
344 * solib-svr4.c: Include "elf/mips.h".
345 (elf_locate_base): Make DT_MIPS_RLD_MAP block unconditional.
349 * dwarf2read.c (read_comp_unit, sibling_die, dump_die,
350 dump_die_list, store_in_ref_table, follow_die_ref): Make these
351 static; they're private functions.
355 * coffread.c (coff_symfile_read): Parse DWARF2 info if present.
359 * TODO: Add import of readline 4.2 as a gdb 5.2 task.
363 * config/djgpp/fnchange.lst: Sort.
367 * config/djgpp/fnchange.lst: Rename mi0-var-block.exp,
368 mi0-var-cmd.exp, mi0-var-child.exp and mi0-var-display.exp.
372 * MAINTAINERS: Add myself to the write-after-approval list.
376 * remote-array.c (SWAP_TARGET_AND_HOST): Delete macro.
377 (get_hex_word): Don't use HOST_BYTE_ORDER.
378 (array_fetch_registers): Add variable ``reg''. Use
379 store_unsigned_integer to byte-swap the register. Delete unused
384 * MAINTAINERS: Add Per Bothner to Java maintainers.
388 * rdi-share/unixcomm.c (SERIAL_PREFIX): Always provide a default.
389 * rdi-share/hostchan.h (__unix): Hack, provide a default value.
390 * rdi-share/host.h (__unix): Hack, define when __NetBSD__.
392 * MAINTAINERS: Update. arm-elf builds.
396 * d10v-tdep.c (d10v_ts2_dmap_register): Doc fix.
398 * d10v-tdep.c (d10v_frame_chain_valid, d10v_use_struct_convention,
399 d10v_breakpoint_from_pc, d10v_register_byte,
400 d10v_register_raw_size, d10v_register_virtual_size,
401 d10v_register_virtual_type, d10v_register_convertible,
402 d10v_register_convert_to_virtual, d10v_register_convert_to_raw,
403 d10v_make_daddr, d10v_make_iaddr, d10v_daddr_p, d10v_iaddr_p,
404 d10v_convert_iaddr_to_raw, d10v_convert_daddr_to_raw,
405 d10v_store_struct_return, d10v_store_return_value,
406 d10v_extract_struct_value_address, d10v_frame_saved_pc,
407 d10v_saved_pc_after_call, d10v_pop_frame, d10v_skip_prologue,
408 d10v_frame_chain, d10v_frame_init_saved_regs,
409 d10v_init_extra_frame_info, d10v_read_pc, d10v_write_pc,
410 d10v_read_sp, d10v_write_sp, d10v_write_fp, d10v_read_fp,
411 d10v_push_return_address, d10v_push_arguments,
412 d10v_extract_return_value): Make these functions static.
416 From Fernando Nasser:
417 * infrun.c (handle_inferior_event): Handle "nexti" inside function
422 * infrun.c (handle_inferior_event): Replace prev_pc test in all
423 calls to bpstat_stop_status (removed in 1999-09-24). This test
424 helps distinguish stepping over a breakpoint trap from stepping
425 thru a jump to the instruction after a breakpoint trap.
426 (handle_inferior_event): Don't bother writing the PC if
427 DECR_PC_AFTER_BREAK is zero (optimization).
428 * breakpoint.c (bpstat_stop_status): Add comment explaining the
429 purpose and usage of the "not_a_breakpoint" argument in computing
430 the breakpoint address.
435 * monitor.c (setmem_resp_delim_pattern): New regexp pattern.
436 (setreg_resp_delim_pattern): Likewise.
437 (setmem_resp_delim_fastmap): New buffer.
438 (setreg_resp_delim_fastmap): Likewise.
439 (monitor_open): Initialize above regexp if they are defined.
440 (monitor_write_memory): Use regexp to check the result of write.
441 (monitor_store_register): Likewise to check result of register set.
446 * coff-solib.c: Include symfile.h and objfiles.h to make
451 * configure.in (--enable-gdbmi): Enable by default.
452 * configure: Regenerate.
458 * solib-osf.c (osf_in_dynsym_resolve_code): Add a comment
459 explaining the consequences of always returning zero. No code
465 * defs.h (enum target_signal): Add TARGET_SIGNAL_REALTIME_65
466 to TARGET_SIGNAL_REALTIME_127.
467 * target.c (struct signals): Add SIG63 to SIG127.
468 (target_signal_from_host): Handle up to 127 signals.
469 (do_target_signal_to_host): Likewise.
473 * remote-sds.c (sds_start_remote): Change type of ``c'' to int
474 from possibly unsigned char.
478 * ser-ocd.c: Delete file.
479 * Makefile.in (ALLDEPFILES): Remove ser-ocd.c
480 (ser-ocd.o): Delete target.
486 * MAINTAINERS (Write After Approval): Sort.
487 (Past Maintainers): Daniel Berlin stepped down as C++ maintainer.
491 * breakpoint.c (breakpoint_1): Always output the breakpoint
492 headings. Leave it to ui-out to decide which
496 * stack.c (print_frame): For ui_out, output a list of arguments.
500 * MAINTAINERS (paper trail): Update.
504 * infrun.c: Eliminate the "thread_step_needed" state variable,
505 and replace it with a relatively simple test in resume.
506 (resume): Replace thread_step_needed logic with a test for
507 stepping, breakpoint_here_p and breakpoints_inserted.
508 Move CANNOT_STEP_BREAKPOINT logic to after thread_step logic.
509 (proceed): Discard thread_step_needed logic.
510 (wait_for_inferior, fetch_inferior_event, handle_inferior_event):
511 Discard thread_step_needed logic.
515 * remote-rdi.c (arm_rdi_wait): Fix return type in prototype.
516 * rdi-share/host.h: Add missing parenthesis in conditional.
520 * configure.in: include nlist.h when checking for member som_addr
522 * configure: regenerate.
526 * cli-out.c (cli_out_new): Initialize new structure member
531 * ui-out.h (ui_out_table_header): Add parameter ``col_name''.
532 (table_header_ftype): Ditto.
533 * cli-out.c (cli_table_header): Update.
534 * ui-out.c (ui_out_table_header): Update.
535 (uo_table_header): Update.
536 (default_table_header): Update.
537 (append_header_to_list): Update.
538 (struct ui_out_header): Add field ``col_name''.
539 (append_header_to_list): Use xstrdup. Initialize col_name.
540 * breakpoint.c (breakpoint_1): Pass COL_NAME to
545 * cli-out.c: Include "gdb_assert.h'.
546 (struct ui_out_data): Add field ``suppress_output.
547 (cli_table_begin): When NR_ROWS is zero, suppress_output.
548 (cli_table_end): Clear suppress_output.
549 (cli_table_body): Check suppress_output.
550 (cli_table_header, cli_begin): Ditto.
551 (cli_end, cli_field_int, cli_field_skip): Ditto.
552 (cli_field_string, cli_field_fmt, cli_spaces): Ditto.
553 (cli_text, cli_message, cli_wrap_hint): Ditto.
554 * breakpoint.c (breakpoint_1): Close the ui_out table before
555 printing the breakpoint not found message.
559 * ui-out.c (ui_out_table_begin): Add parameter ``nr_rows''.
560 (default_table_begin): Ditto.
561 (uo_table_begin): Ditto.
562 * cli-out.c (cli_table_begin): Ditto.
563 * ui-out.h (ui_out_table_begin): Update
564 (table_begin_ftype): Update.
565 * breakpoint.c (breakpoint_1): Pass nr_printable_breakpoints to
570 * breakpoint.c (breakpoint_1): Restructure. Compute the
571 nr_printable_breakpoints. Move the header output to before the
572 main print breakpoints loop.
573 (user_settable_breakpoint): New function.
577 * infrun.c, breakpoint.c: Use strncmp as the "mi" test. Allow,
578 "mi", "mi0" and "mi1".
582 * gdbarch.sh: Generate an error when conflicting macro
583 definitions. Generate an error when both pure multi-arch and
585 * gdbarch.h, gdbarch.c: Regenerate.
586 * defs.h (GDB_MULTI_ARCH_TM): Rewrite definition.
590 * config/sparc/tm-sun4sol2.h (GDB_MULTI_ARCH): Down grade to
591 GDB_MULTI_ARCH_PARTIAL from two.
596 * cli/cli-script.c (free_command_lines): Reset list pointer.
600 * arch-utils.c (init_frame_pc_default): New function
601 * arch-utils.h (init_frame_pc_default): Declare.
602 * gdbarch.sh (INIT_FRAME_PC): Default to init_frame_pc_default and
603 not init_frame_pc_noop.
604 * gdbarch.h, gdbarch.c: Re-generate.
605 * blockframe.c (INIT_FRAME_PC): Delete macro definition.
606 * mips-tdep.c (mips_gdbarch_init): Set init_frame_pc to
611 * gdbarch.c: Regenerate. Out-of-sync with gdbarch.sh.
615 * gdbarch.sh (CANNOT_FETCH_REGISTER): Multi-arch.
616 (CANNOT_STORE_REGISTER): Ditto.
617 * infptrace.c (CANNOT_FETCH_REGISTER): Delete definition.
618 (CANNOT_STORE_REGISTER): Ditto.
619 * regcache.c (CANNOT_STORE_REGISTER): Ditto.
620 * lynx-nat.c (CANNOT_STORE_REGISTER): Ditto.
621 * arch-utils.h (cannot_register_not): Define.
622 * arch-utils.c (cannot_register_not): Declare.
626 * gdbarch.sh: Clarify pre/post default
627 (INIT_FRAME_PC_FIRST, INIT_FRAME_PC): Multiarch.
628 * blockframe.c (get_prev_frame): Remove #ifdef from around
629 INIT_FRAME_PC_FIRST call.
630 * arch-utils.c (init_frame_pc_noop): Define.
631 * arch-utils.h (init_frame_pc_noop): Declare.
632 * config/mips/tm-mips.h (INIT_FRAME_PC_FIRST): Delete.
633 (INIT_FRAME_PC, mips_init_frame_pc_first): Ditto.
634 * mips-tdep.c (mips_init_frame_pc_first): Make static.
635 (mips_gdbarch_init): Initialize init_frame_pc_first.
636 (mips_dump_tdep): Update.
640 * infrun.c (context_switch): New function. Abstract the operation
641 of saving and restoring infrun's state when switching threads.
642 (handle_inferior_event): Normalize the handling of the 'thread hop'
643 event (when the wrong thread hits a thread-specific breakpoint,
644 and we need to solo-step that thread past the breakpoint).
645 Call keep_going, instead of target_resume. Handle the subsequent
646 singlestep-trap as a normal event instead of just resuming.
650 * arch-utils.c (core_addr_identity): New function. Rename
651 default_convert_from_func_ptr_addr.
652 * gdbarch.sh (CONVERT_FROM_FUNC_PTR_ADDR): Update.
653 (ADDR_BITS_REMOVE): Define. Default to core_addr_identity.
654 * defs.h (ADDR_BITS_REMOVE): Delete macro definition.
655 * config/mips/tm-mips.h (ADDR_BITS_REMOVE): Delete definition.
656 * mips-tdep.c (mips_addr_bits_remove): Make static.
657 (mips_gdbarch_init): Initialize addr_bits_remove.
662 * configure.tgt: Add S/390 31 & 64 bit target configuration.
663 * configure.host: Ditto for host.
667 * gdbarch.sh (EXTRACT_STRUCT_VALUE_ADDRESS_P): Delete definition.
668 (EXTRACT_STRUCT_VALUE_ADDRESS): Change to a function with
670 * gdbarch.h, gdbarch.c: Regenerate.
671 * values.c (value_being_returned): Change the reference to
672 EXTRACT_STRUCT_VALUE_ADDRESS_P to a function call.
676 * MAINTAINERS: Add Paul Hilfinger and Joel Brobecker to the
677 Write After Approval list.
681 * remote.c (show_remote_protocol_qSymbol_packet_cmd,
682 set_remote_protocol_qSymbol_packet_cmd): New functions.
683 (init_all_packet_configs, show_remote_cmd): Add qSymbol packet.
684 (remote_check_symbols): New function. Implement qSymbol packet,
685 allowing target to request symbol lookup service from gdb.
686 (remote_open_1, remote_async_open_1): Call remote_check_symbols,
687 allowing symbol lookup from exec_bfd on connection to target.
688 (remote_new_objfile): New function. Catch new objfile notifications
689 from shared library module, and call remote_check_symbols.
690 (_initialize_remote): Hook remote_new_objfile into the shared
691 library notification chain. Add "set remote symbol-lookup" command.
695 * tracepoint.c (trace_command): We now have tracepoint
696 events. Get rid of those ugly hooks.
697 (tracepoint_operation): Likewise.
698 (trace_pass_command): Likewise.
702 * gdbthread.h (struct thread_info): Add new fields:
703 current_line, current_symtab, step_sp, for saved infrun state.
704 * thread.c (save_infrun_state, load_infrun_state): Save and
705 restore current_line, current_symtab, and step_sp.
706 (add_thread): Rather than adding assignments to initialize
707 the new fields, just use memset (tp, 0, sizeof (*tp).
708 This way future new fields will not be overlooked.
709 * infrun.c (handle_inferior_event): Save and restore save_sp,
710 current_line, and current_symtab when switching threads.
714 * MAINTAINERS: Add Andrew Cagney as co-maintainer of
719 * symtab.c (lookup_symtab_1): Replace basename with lbasename.
720 (lookup_partial_symtab, file_matches): Ditto.
721 (make_source_files_completion_list): Ditto.
722 (make_file_symbol_completion_list): Ditto. Make local char*
723 variable ``tail'' constant.
724 (make_source_files_completion_list): Ditto with ``base_name''.
725 * source.c (open_source_file): Use lbasename. Make ``p'' const
730 * config/i386/xm-go32.h (SLASH_P, ROOTED_P, SLASH_CHAR)
731 (SLASH_STRING): Remove unised definitions.
732 * config/i386/xm-cygwin.h: Likewise.
736 * ui-out.c (ui_out_list_begin): Add parameter ``id''.
737 (make_cleanup_ui_out_list_begin_end): Ditto. Open the list.
738 * ui-out.h: Update declarations.
742 * source.c (openp): Make parameters ``path'' and ``string''
744 (openp): Use alloca to safely duplicate ``string''. Make local
745 variables ``p'' and ``p1'' constant. Delete char* casts.
748 * symtab.c (lookup_symtab_1): Make parameter ``name'' constant.
749 (lookup_symtab, lookup_partial_symtab): Ditto.
750 * symtab.h (lookup_symtab, lookup_partial_symtab): Update.
754 * ui-out.h (ui_out_table_begin): Make char* parameters constant.
755 (ui_out_table_header, ui_out_field_int): Ditto.
756 (ui_out_field_core_addr, ui_out_field_string): Ditto.
757 (ui_out_field_stream, ui_out_field_fmt): Ditto.
758 (ui_out_field_skip, ui_out_text, ui_out_message): Ditto.
759 * ui-out.c (ui_out_table_begin, ui_out_table_header): Update.
760 (ui_out_field_core_addr, ui_out_field_stream): Update.
761 (ui_out_field_string, ui_out_field_fmt): Update.
762 (ui_out_text, ui_out_message): Update.
763 (append_header_to_list): Make char* parameters constant.
764 (uo_table_header, uo_table_begin): Ditto.
765 (uo_field_int, uo_field_skip): Ditto.
766 (uo_field_string, uo_field_fmt): Ditto.
767 (uo_text, uo_message): Ditto.
771 * completer.c (gdb_completer_loc_break_characters): New variable.
772 (line_completion_function): If we are completing on locations,
773 back up the start of word pointer past all characters which can
774 appear in a location spec.
775 (location_completer): New function.
777 * completer.h: Add prototype for location_completer.
779 * symtab.c (make_source_files_completion_list)
780 (add_filename_to_list, not_interesting_fname): New functions.
781 (filename_seen): New function, body extracted from
782 output_source_filename.
783 (output_source_filename): Call filename_seen to check if the file
785 (make_symbol_completion_list): If TEXT includes a
786 double-quoted string, return an empty list, not NULL.
787 (make_file_symbol_completion_list): New function, similar to
788 make_symbol_completion_list but with an additional argument
791 * symtab.h (make_file_symbol_completion_list)
792 (make_source_files_completion_list): Add prototypes.
794 * breakpoint.c (_initialize_breakpoint): Make location_completer
795 be the completion function for all commands which set breakpoints
797 (top-level): #include "completer.h".
799 * tracepoint.c (_initialize_tracepoint): Make location_completer
800 be the completion function for the "trace" command.
801 (top-level): #include "completer.h".
803 * printcmd.c (_initialize_printcmd): Make location_completer be
804 the completion function for the "print", "inspect", "call", and
805 "disassemble" commands.
806 (top-level): #include "completer.h".
808 * infcmd.c (_initialize_infcmd): Make location_completer be the
809 completion function for the "go", "jump", and "until" commands.
810 (top-level): #include "completer.h".
814 * gnu-regex.c: Eliminate obsolete check for _MSC_VER.
815 * utils.c (notice_quit): Remove dummy function only used for _MSC_VER.
816 * values.c (unpack_double): Remove obsolete check for _MSC_VER.
820 * ser-e7kpc.c: Ditto. Define WIN32_LEAN_AND_MEAN under _WIN32, for
822 (get_ds_base): Remove _MSC_VER version of this function.
823 * nindy-share/ttyflush.c: Ditto.
824 * rdi-share/host.h: Ditto.
825 * ser-go32.c (dos_readchar): Remove call to obsolete function.
826 * remote-sim.c (gdb_os_poll_quit): Ditto.
827 * remote-e7000.c (expect): Remove obsolete #if 0'ed code.
829 * main.c (captured_main): Eliminate special Cygwin checks.
830 * ser-tcp.c: Remove unneeded __CYGWIN__ guard against system include.
834 * Makefile.in (gdbcmd_h): Add ui_out_h.
835 (breakpoint.o, infcmd.o, main.o, printcmd.o, stack.o): Ditto.
836 (thread.o, top.o): Ditto.
838 * ui-out.h (table_begin_ftype): Make string parameters constant.
839 (table_header_ftype): Ditto.
840 (field_int_ftype): Ditto.
841 (field_skip_ftype): Ditto.
842 (field_string_ftype): Ditto.
843 (field_fmt_ftype): Ditto.
845 (message_ftype): Ditto.
846 * cli-out.c (cli_table_begin): Ditto.
847 (cli_table_header): Ditto.
848 (cli_field_int): Ditto.
849 (cli_field_skip): Ditto.
850 (cli_field_string): Ditto.
851 (cli_field_fmt): Ditto.
853 (cli_message): Ditto.
854 (out_field_fmt): Ditto.
855 * ui-out.c (default_table_begin): Ditto.
856 (default_table_header): Ditto.
857 (default_field_int): Ditto.
858 (default_field_skip): Ditto.
859 (default_field_string): Ditto.
860 (default_field_fmt): Ditto.
861 (default_text): Ditto.
862 (default_message): Ditto.
866 * breakpoint.c (delete_breakpoint): Pass mark_inserted to
867 remove_breakpoint, so that the subsequent test for
868 bpt->inserted will succeed, and duplicates will be fixed up.
872 * dwarf2read.c (set_cu_language): Handle DW_LANG_Java.
876 * tracepoint.c (tracepoint_opertation): Add ui event
878 (trace_pass_command): Ditto.
882 * MAINTAINERS (Write After Approval): Note the entry criteria.
883 (HP/PA): Jeff Law stepped down
887 * gdbarch.sh: Make sure that '[' doesn't interpret interesting
888 variable values as operators.
892 * gdb-events.sh: Fix quote escaping which was obsoleted
897 * gdb-events.sh: Make if statements and tests
898 a little more portable.
899 Don't use shell's echo command to put strings containing
900 escaped characeters into a file -- different flavors of /bin/sh
901 require differnt levels of escaping. Use cat <<EOF instead.
902 Our internal field separator is a colon. Change all
903 commands which assume it is a space.
907 * lin-lwp.c (struct lwp_info): Add member `resumed'.
908 (iterate_over_lwps): Make sure we can handle CALLBACK deleting the
910 (lin_lwp_attach): Mark LWP as resumed to make sure the fake
912 (resume_clear_callback): New function.
913 (resume_set_callback): New function.
914 (lin_lwp_resume): Mark all LWP's that we're going to resume as
915 resumed, and unmark all others.
916 (status_callback): Only report a pending wait status if we pretend
917 that LP has been resumed.
918 (resumed_callback): New function.
919 (lin_lwp_wait): Add assertions to check that LWP's are properly
920 marked as resumed. Partially revert 2001-05-25 patch by Michael
921 Snyder: do not resume all threads. Add comment explaining the
922 problems associated with this bit of code.
926 * MAINTAINTERS: Syd Polk is stepping down from
927 maintaining libgui. I am replacing him.
931 * config/mips/tm-irix6.h: New file.
933 * config/mips/irix6.mh: New file.
935 * config/mips/irix6.mt: New file.
937 * config/mips/xm-irix6.h: New file.
939 * config/mips/nm-irix6.h: New file.
941 * mips-tdep.c (mips_gdbarch_init) <MIPS_ABI_N32>: Set up the
942 disassembler info in tm_print_insn_info as appropriate for the N32
943 ABI. Force N32 ABI to be the default if the CPU is R8000 or
946 * configure.tgt (mips*-sgi-irix6*): Map to irix6.
948 * configure.host (mips*-sgi-irix6*): Ditto.
952 * gnu-v3-abi.c: Include "gdb_assert.h".
953 (build_gdb_vtable_type): Replace abort() with gdb_assert().
957 * cp-abi.h: Rearrange code to put documentation comments above the
958 functions we export. The actual function table itself simply
959 refers to those functions. Minor doc fixes.
961 * gdbarch.sh: Changes to effect the following:
962 * gdbarch.c (initialize_non_multiarch): New function.
963 * gdbarch.h (initialize_non_multiarch): New declaration.
964 * arch-utils.c (initialize_current_architecture): For
965 non-multiarch configurations, call initialize_non_multiarch.
969 * symfile.c (compare_psymbols): Replace PTR with void*. Delete
971 (compare_symbols): Ditto.
975 * arch-utils.c (generic_prepare_to_proceed): Allow for having
976 stopped due to a Ctrl-C as well as breakpoints.
978 * hppa-tdep.c (hppa_prepare_to_proceed): Add FIXME as this may not
979 support thread switches after Ctrl-C.
980 * lin-lwp.c (lin_lwp_prepare_to_proceed): Ditto.
981 * linux-thread.c (linuxthreads_prepare_to_proceed): Ditto.
982 * m3-nat.c (mach3_prepare_to_proceed): Ditto.
986 * gdbarch.sh, gdbarch.c: Revert change of 2001-06-01; all
987 per-architecture data should be registered at initialization time,
988 before any gdbarch objects get used, so the generality is
993 * gdb-events.sh (function_list): Add tracepoint_create,
994 tracepoint_delete, and tracepoint_modify events.
995 * gdb-events.c: Regenerated.
996 * gdb-events.h: Regenerated.
1000 * gdb-events.sh: Update copyrights.
1001 Change free to xfree.
1002 * gdb-events.c: Regenerated.
1003 * gdb-events.h: Regenerated.
1007 * source.c (mod_path, openp): Use #ifdef HAVE_DOS_BASED_FILE_SYSTEM
1008 instead of #if HAVE_DOS_BASED_FILE_SYSTEM.
1009 * completer.c: Ditto.
1010 * cli/cli-cmds.c (cd_command): Ditto.
1014 * mips-tdep.c (show_mipsfpu_command): Remove unused variable msg.
1015 (mips_set_processor_type_command): Remove unused variable j.
1016 (mips_breakpoint_from_pc): Declare breakpoint instruction
1017 sequences as unsigned char, to avoid compiler warnings.
1019 * source.c (mod_path, openp): Use HAVE_DOS_BASED_FILE_SYSTEM
1020 instead of system-specific define's like _WIN32 and __MSDOS__.
1021 Use IS_DIR_SEPARATOR and IS_ABSOLUTE_PATH instead of SLASH_P and
1023 (top-level): #include "filenames.h".
1025 * solib.c (solib_open): Use IS_DIR_SEPARATOR and IS_ABSOLUTE_PATH
1026 instead of SLASH_CHAR, ROOTED_P and SLASH_P.
1027 (top-level): #include "filenames.h".
1029 * defs.h (SLASH_P, SLASH_CHAR, ROOTED_P): Remove definitions.
1030 (SLASH_STRING): Define only for _WIN32.
1032 * completer.c: Use HAVE_DOS_BASED_FILE_SYSTEM instead of
1035 * cli/cli-cmds.c (cd_command): Use IS_DIR_SEPARATOR and
1036 IS_ABSOLUTE_PATH instead of SLASH_P and ROOTED_P. Replace
1037 system-specific ifdefs with HAVE_DOS_BASED_FILE_SYSTEM.
1038 (top-level): #include "filenames.h".
1040 * go32-nat.c (go32_wait): Change the return value to ptid_t.
1042 * config/djgpp/fnchange.lst: Add two new files in the
1043 gdb/testsuite/gdb.c++/ directory to the remapped names.
1045 * config/djgpp/djconfig.sh (lt_cv_sys_max_cmd_len): Set to 12KB.
1049 Expand the gdbarch per-architecture data vector as needed, rather
1050 than requiring that all per-architecture data be registered before
1051 the first gdbarch object is allocated.
1052 * gdbarch.sh: Changes to effect the following:
1053 * gdbarch.c (alloc_gdbarch_data, init_gdbarch_data): Delete
1054 declarations and definitions.
1055 (check_gdbarch_data): New function, and declaration.
1056 (gdbarch_alloc): Don't call alloc_gdbarch_data; leaving the fields
1057 zero is good enough.
1058 (free_gdbarch_data): Tolerate a null data pointer. Free only
1059 those data items gdbarch->data actually has allocated.
1060 (set_gdbarch_data, gdbarch_data): Call check_gdbarch_data.
1061 (gdbarch_update_p): No need to call init_gdbarch_data.
1065 * ia64-tdep.c (is_float_or_hfa_type_recurse): Call check_typedef()
1066 on types that we wish to recurse on.
1067 (slot_alignment_is_next_even): New function.
1068 (ia64_push_arguments): Call slot_alignment_is_next_even() to
1069 examine the type in order to decide if it's necessary to skip
1074 * thread.c (delete_step_resume_breakpoint): New function.
1075 Maintain internal consistency of the thread list while deleting
1076 a step_resume_breakpoint.
1077 * gdbthread.h (delete_step_resume_breakpoint): Export.
1078 * breakpoint.c (bpstat_find_step_resume_breakpoint):
1079 Make thread-aware: don't return a step_resume_breakpoint
1080 for the wrong thread.
1081 * infrun.c (wait_for_inferior): Call delete_step_resume_breakpoint
1082 instead of delete_breakpoint_current_contents.
1083 (fetch_inferior_event): Ditto.
1084 (handle_inferior_event): Call delete_step_resume_breakpoint
1085 instead of delete_breakpoint.
1086 * infrun.c (handle_inferior_event): After singlestepping over a
1087 thread-specific breakpoint, use currently_stepping() to decide
1088 whether to step or continue.
1092 * gnu-v3-abi.c (gnu_v3_abi_ops, vtable_type_gdbarch_data): Make
1093 these static --- there's no reason other files should use these.
1095 * partial-stab.h (case N_FUN: case 'f':, case N_FUN: case 'F':)
1098 * partial-stab.h: New complaint: function_outside_compilation_unit.
1099 (case N_FUN: case 'f':, case N_FUN: case 'F':): If pst is zero,
1100 complain, and don't try to set pst's start address.
1104 * ia64-linux-tdep.c (IA64_LINUX_SIGCONTEXT_OFFSET): Revise to
1105 match the location at which the kernel is placing the sigcontext
1108 * ia64-tdep.c (max_skip_non_prologue_insns): New static global.
1109 (refine_prologue_limit): New function.
1110 (examine_prologue): Further limit number of instructions
1111 scanned by calling refine_prologue_limit(). Revise way in
1112 which the end of prologue address is computed for frameless
1117 * partial-stab.h: Revert previous patch.
1121 * partial-stab.h: Consistently guard against pst being NULL.
1125 * symfile.c (compare_psymbols, compare_symbols): Declare using
1126 PTR, as in the definition.
1127 * minsyms.c (compare_minimal_symbols): Likewise.
1128 * coffread.c (find_targ_sec): Likewise.
1129 * elfread.c (free_elfinfo, elf_locate_sections): Likewise.
1130 * mipsread.c (alphacoff_locate_sections): Likewise.
1131 * mdebugread.c (compare_blocks): Likewise.
1135 * solib.c (update_solib_list): Move target_resize_to_sections()
1136 into solib_map_sections() loop.
1137 (info_sharedlibrary_command): Try bfd_arch_bits_per_address() if
1138 bfd_get_arch_size() fails.
1142 * Makefile.in (osfsolib.c, osfsolib.o): Rename to solib-osf.c and
1144 * config/alpha/alpha-osf1.mh (NATDEPFILES): Replace osfsolib.o
1145 with solib-osf.o and solib.o.
1146 * config/alpha/alpha-osf2.mh: Likewise.
1147 * config/alpha/alpha-osf3.mh: Likewise.
1148 * solib-osf.c: New file, renamed and largely rewritten from
1153 * lin-lwp.c (lin_lwp_attach_lwp): Call stop_wait_callback,
1154 to consume the SIGSTOP generated by PTRACE_ATTACH.
1155 (stop_wait_callback): If a SIGTRAP or a SIGINT event is consumed,
1156 try again to get the SIGSTOP event.
1157 (lin_lwp_wait): Resume all threads when ignoring a signal.
1158 This will insure that newly attached threads get resumed.
1159 * lin-lwp.c (stop_wait_callback): Discard redundant SIGINT events.
1160 * remote.c (remote_write_bytes): Update 'p' packet pointer.
1164 * gnu-v2-abi.c (gnuv2_virtual_fn_field): There's no need to clear
1165 VALUE_POINTED_TO_OFFSET here; if value_cast doesn't return a
1166 useful value, then we should fix that instead.
1170 * solist.h (struct so_list): Document the requirement that
1171 current_sos initialize some fields to 0.
1175 * gnu-nat.c: Include <ctype.h>.
1176 (gnu_pid_to_exec_file): Add PID parameter.
1177 (set_sig_thread_cmd): Use PIDGET on return value from
1179 (proc_string): Use MERGEPID to construct argument to
1184 * breakpoint.c (breakpoint_address_is_meaningful): New function.
1185 (check_duplicates): Don't compare non-meaningful addresses.
1189 * thread-db.c: Allow for defunct zombie threads.
1190 (attach_thread): Do not attempt to attach zombie thread.
1191 (thread_db_thread_alive): Return false for defunct zombie thread.
1192 (find_new_threads_callback): Don't add defunct zombie thread to list.
1196 Add support for the GNU V3 C++ ABI.
1197 (Includes changes by Dan Berlin.)
1199 * gnu-v3-abi.c: New file.
1200 * minsyms.c: #include "value.h" and "cp-abi.h".
1201 (install_minimal_symbols): Check the minimal symbol table for
1202 symbols that look mangled in the V3 style, and select the V3 ABI
1204 * Makefile.in (SFILES): Add gnu-v3-abi.c.
1205 (COMMON_OBS): Add gnu-v3-abi.o.
1206 (gnu-v3-abi.o): Add new rule.
1207 (minsyms.o): Depend on $(cp_abi_h) and $(value_h).
1211 * values.c (value_primitive_field): If we're extracting a base
1212 class, then the type of the result should be the base class being
1213 extracted, not the type of which it is a base class.
1215 * value.h (struct value): Doc fix, and rearrange members to place
1216 them near their explanations.
1220 * remote.c (remote_async_wait): Added new variable fieldsize.
1221 Add fieldsize (return value of hex2bin) to string pointer p.
1225 * m68hc11-tdep.c (m68hc11_pop_frame): Fix stack pointer computation.
1226 (m68hc11_analyze_instruction): Update the pc correctly.
1227 (m68hc11_guess_from_prologue): Take into account the stack correction
1228 for the saving address.
1232 Changes by Jim Ingham:
1234 * values.c (value_change_enclosing_type): New function. If the
1235 new enclosing type is larger than the old one, we need to allocate
1237 * value.h: Add value_change_enclosing_type prototype.
1238 * valops.c (value_cast): Use it.
1239 (value_assign): Use it.
1240 (value_addr): Use it.
1241 (value_ind): Use it.
1242 (value_full_object): Use it.
1246 * values.c (value_static_field): Handle static fields that have a
1251 * blockframe.c (create_new_frame): Zero all the fields via memset,
1252 rather than zeroing them one by one.
1256 * top.c (user_args): Remove unused declaration.
1260 * infcmd.c (do_registers_info): Move alloca outside of loop.
1264 * remote.c (remote_wait): Added new variable fieldsize.
1265 Add fieldsize (return value of hex2bin) to string pointer p.
1269 * sparc-tdep.c (sparc_gdbarch_init): Get the architecture from
1274 * lin-lwp.c (detach_callback, lin_lwp_wait, lin_lwp_pid_to_str):
1275 Adjust format strings for printing LWPs to account for the fact
1276 that the type returned by GET_LWP() is now a long instead of an
1281 * inferior.h (null_ptid, minus_one_ptid): New variable declarations.
1282 (ptid_build, pid_to_ptid, ptid_get_pid, ptid_get_lwp)
1283 (ptid_get_tid, ptid_equal): New function declarations.
1284 * infrun.c (null_ptid, minus_one_ptid): New variables.
1285 (ptid_build, pid_to_ptid, ptid_get_pid, ptid_get_lwp)
1286 (ptid_get_tid, ptid_equal): New functions.
1287 (_initialize_infrun): Initialize null_ptid, minus_one_ptid,
1288 inferior_ptid, and target_last_wait_ptid.
1290 * defs.h (ptid_t): Redefine to be a struct rather than an int.
1291 (pid_to_ptid, null_ptid, ptid_equal): Delete these macros.
1292 (PIDGET, TIDGET, MERGEPID): Redefine these macros using the
1293 new ptid accessors and constructor.
1295 * config/i386/tm-i386v42mp.h (PIDGET, TIDGET, LIDGET, MERGEPID,
1296 MKLID, MKTID, ISTID): Provide new definitions for these macros.
1297 The old macros are retained, but disabled via #if 0 in order
1298 to aid in future restructuring. See FIXME.
1300 * arm-linux-nat.c (PIDGET, TIDGET): Delete macro definitions.
1301 * i386-linux-nat.c (PIDGET, TIDGET): Likewise.
1302 * infptrace.c (PIDGET, TIDGET): Likewise.
1303 * lin-lwp.c (PIDGET0, PIDGET, TIDGET, MERGEPID): Likewise.
1304 * lin-thread.c (PIDGET0, PIDGET, TIDGET, MERGEPID): Likewise.
1305 * proc-service.c (MERGEPID): Likewise.
1306 * procfs.c (PIDGET, TIDGET, MERGEPID): Likewise.
1307 * thread-db.c (PIDGET0, PIDGET, TIDGET, MERGEPID): Likewise.
1308 * config/nm-linux.h (PIDGET0, PIDGET, TIDGET, MERGEPID): Likewise.
1309 * config/i386/tm-i386sol2.h (PIDGET0, PIDGET, TIDGET, MERGEPID):
1311 * config/sparc/tm-sun4sol2.h (PIDGET0, PIDGET, TIDGET, MERGEPID):
1314 * lin-lwp.c (THREAD_FLAG): Delete macro definition.
1315 (GET_LWP): Redefine in terms of ptid_get_lwp().
1316 (GET_PID): Redefine in terms of ptid_get_pid().
1317 (is_lwp): Redefine without the need for THREAD_FLAG.
1318 (BUILD_LWP): Redefine in terms of ptid_build().
1319 * lin-thread.c (THREAD_FLAG): Delete macro definition.
1320 (GET_LWP): Redefine in terms of ptid_get_lwp().
1321 (GET_PID): Redefine in terms of ptid_get_pid().
1322 (GET_THREAD): Redefine in terms of ptid_get_tid().
1323 (BUILD_THREAD, BUILD_LWP): Redefine in terms of ptid_build().
1324 (is_lwp, is_thread): Redefine.
1325 (linux_child_wait, check_all_signal_numbers)
1326 (linuxthreads_discard_global_state, attach_thread): Declare these
1327 functions to squash warnings about missing declarations.
1328 * sol-thread.c (THREAD_FLAG): Delete macro definition.
1329 (GET_PID): Redefine in terms of ptid_get_pid().
1330 (GET_LWP): Redefine in terms of ptid_get_lwp().
1331 (GET_THREAD): Redefine in terms of ptid_get_tid().
1332 (BUILD_THREAD, BUILD_LWP): Redefine in terms of ptid_build().
1333 (is_lwp, is_thread): Redefine.
1334 * thread-db.c (THREAD_FLAG): Delete macro definition.
1335 (GET_PID): Redefine in terms of ptid_get_pid().
1336 (GET_LWP): Redefine in terms of ptid_get_lwp().
1337 (GET_THREAD): Redefine in terms of ptid_get_tid().
1338 (BUILD_THREAD, BUILD_LWP): Redefine in terms of ptid_build().
1339 (is_lwp, is_thread): Redefine.
1341 * corelow.c (add_to_thread_list, get_core_register_section):
1342 Eliminate hacks needed to prevent regressions when inferior_ptid
1343 wasn't wide enough to hold the core file thread id in the pid
1344 component of inferior_ptid.
1348 * remote.c (hex2bin): Make first argument const.
1349 Require explicit count, don't accept null-terminated str.
1350 (remote_resume, remote_async_resume): White space fix-up.
1351 (remote_write_bytes): Set nr_bytes to return value of bin2hex.
1355 * symtab.c (lookup_symtab_1): Use lbasename (NAME) instead of
1356 basename (NAME). The FreeBSD basename returns a pointer to a
1357 static buffer, even if it's simply returning a string identical to
1359 (lookup_partial_symtab): Likewise.
1363 * solib.c, solib.h: Add comment for function no_shared_libraries.
1367 * solib.h (no_shared_libraries): Make declaration match definition
1372 * remote.c (remote_write_bytes): Set nr_bytes before returning it.
1373 * solib.h (no_shared_libraries): Declare.
1377 * gdbarch.sh (struct gdbarch_info): Delete field bfd_architecture.
1378 (gdbarch_update_p): Rewrite logic filling in INFO struct. Use
1379 user specified values when available.
1380 * rs6000-tdep.c (rs6000_gdbarch_init): Update. Get the
1381 architecture from info.bfd_arch_info.
1382 * gdbarch.c, gdbarch.h: Regenerate.
1386 * remote-e7000.c (e7000_open): Check for bad baud rate.
1387 * remote-st.c (st2000_open): Ditto.
1391 * thread.c (do_captured_list_thread_ids): Use ui_out_tuple_begin
1392 and ui_out_tuple_end instead of ui_out_list_begin and
1395 * Makefile.in (gnu-v2-abi.o): Add $(demangle_h) to list of
1396 dependencies. Reorder dependencies to match #includes in file,
1397 for easier verification.
1401 * breakpoint.c: Replace ui_out_list_begin, ui_out_list_end and
1402 make_cleanup_ui_out_list_end with ui_out_tuple_begin,
1403 ui_out_tuple_end and make_cleanup_ui_out_tuple_begin_end.
1404 * cli/cli-setshow.c: Ditto.
1405 * printcmd.c: Ditto.
1408 * ui-out.h (enum ui_out_type): Fix tipo - tupple -> tuple.
1409 * ui-out.c (ui_out_list_begin): Delete ``lstid'' parameter.
1410 (ui_out_tuple_begin): New function.
1411 (ui_out_tuple_end): New function.
1412 (ui_out_tuple_begin_end): New function.
1413 (make_cleanup_ui_out_list_begin_end): Replace
1414 make_cleanup_ui_out_list_end function.
1415 * ui-out.h (ui_out_list_begin): Update declaration.
1416 (make_cleanup_ui_out_list_begin_end): Replace
1417 make_cleanup_ui_out_list_end declaration.
1418 (ui_out_tuple_begin, ui_out_tuple_end): Declare.
1419 (ui_out_tuple_begin_end): Declare.
1423 * gnu-v2-abi.c: Don't #include "gdb_regex.h". We don't use it.
1428 * config/pa/tm-hppa.h: Remove trigraph.
1429 * hp-symtab-read.c (hpread_type_translate): Provide return value.
1430 (hpread_read_struct_type): Remove trigraph. Add parameter in
1432 (hpread_read_array_type): Provide return value.
1433 (hpread_type_lookup): Avoid ambiguous `else'. Provide return
1435 * hppa-tdep.c (initialize_hp_cxx_exception_support): Remove
1440 * mips-tdep.c (mips_store_return_value,
1441 mips_extract_return_value): Pass arguments to
1442 return_value_location in the proper order.
1446 * Makefile.in (VERSION): Delete. Moved to file ``version.in''.
1447 (version.c): Depends on file ``version.in''. Extract version
1448 number from ``version.in'' file.
1449 (clean mostlyclean): Update.
1450 * version.in: New file.
1455 * breakpoint.c (set_raw_breakpoint): Add new parameter
1456 representing the breakpoint's type. Adjust all callers.
1457 (create_longjmp_breakpoint, create_temp_exception_breakpoint)
1458 (create_thread_event_breakpoint): Don't test for zero return
1459 value from set_raw_breakpoint(). It can never be zero.
1460 (create_exception_catchpoint, watch_command_1): Move logic
1461 which calculates the breakpoint type prior to the call to
1462 set_raw_breakpoint().
1466 * ser-unix.c (rate_to_code): Issue warning if baud rate is invalid.
1467 (hardwire_setbaudrate): Set errno to EINVAL and return with error
1468 if the conversion of the baud rate to code fails.
1472 * ui-out.h (make_cleanup_ui_out_begin_end): Declare.
1473 * ui-out.c (struct ui_out_end_cleanup_data): Define.
1474 (do_cleanup_end): New function. Replace do_list_end.
1475 (make_cleanup_ui_out_end): New function.
1476 (make_cleanup_ui_out_begin_end): New function.
1477 (make_cleanup_ui_out_list_end): Use make_cleanup_ui_out_end.
1481 * MAINTAINERS: Declare xcoffread.c open to all maintainers,
1486 * proc-api.c (ioctl_with_trace): Fix uninitialized variable.
1490 * MAINTAINERS: Add testsuite subdirectory co-maintainers.
1494 * Makefile.in (mi-main.o): Compile with -Werror.
1498 * remote.c (remote_open_1): Call no_shared_libraries, so that
1499 symbols for shared libraries can be reloaded per session.
1500 (remote_async_open_1): Ditto.
1501 * remote.c (bin2hex, hex2bin): New functions. Factor out these
1502 two conversions which are coded for repeatedly in this module.
1503 (remote_threads_extra_info, remote_wait, remote_async_wait,
1504 store_register_using_P, remote_store_registers, remote_write_bytes,
1505 remote_read_bytes, remote_rcmd): Use bin2hex and hex2bin instead
1506 of coding the conversions inline.
1507 (fromhex): Not exported, change from extern to static.
1511 * arch-utils.c (initialize_current_architecture): Delete obsolete
1512 ``info architecture'' command.
1513 (info_architecture): Delete function.
1517 * TODO (5.1, 5.2): Update.
1521 * MAINTAINERS: Jim Ingham is no longer maintaining Arm related
1526 * Makefile.in (SUBDIR_GDBTK_OBS): Add gdbtk-bp.o, gdbtk-register.o
1528 (SUBDIR_GDBTK_SRCS): Ditto for the sources.
1529 (gdbtk-bp.o): New rule.
1530 (gdbtk-register.o): New rule.
1531 (gdbtk-stack.o): New rule.
1532 (gdbtk-cmds.o): Update dependencies.
1534 (gdbtk-hooks.o): Ditto.
1535 (gdbtk-varobj.o): Ditto.
1539 * varobj.c (c_number_of_children): Fix memory leak. Delete unwanted old
1540 variables, not just unregister them.
1544 * varobj.c (c_number_of_children): Check for target type of void*,
1545 not the target type name. Allow dereferencing char*.
1549 * symfile.c (symbol_file_add_main_1): New static function.
1550 Passes the flags arguments to symbol_file_add() and takes care
1551 of any necessary reinitializations.
1552 (symbol_file_command): Call symbol_file_add_main_1() instead of
1554 (symbol_file_add_main): Ditto.
1558 * lin-lwp.c (lin_lwp_pid_to_str): Revert inadvertent format
1559 string change in 2001-05-03 changes.
1560 (lin_lwp_wait): Revert GET_LWP coercion introduced in 2001-05-03
1565 * lin-lwp.c (lin_lwp_attach): Use PIDGET() to fetch the pid
1566 component from inferior_ptid.
1567 (lin_lwp_detach): Use pid_to_ptid() to convert from a pid to a
1572 * sh3-rom.c (_initialize_sh3_rom): Get rid of specific _WINDOWS
1573 conditional for help with connections through parallel ports,
1574 given that the actual code for downloading through a parallel port
1575 is not conditionalized.
1577 * sh-tdep.c: Remove WIN32_WCE conditional. The wince sh target is
1578 unmaintaned, and probably on its way to obsolescence.
1582 * i386-tdep.c (i386_frame_saved_pc): New function.
1583 * config/i386/tm-i386.h (FRAME_SAVED_PC): Redefine in terms of
1584 i386_frame_saved_pc.
1585 (i386_frame_saved_pc): New prototype.
1587 * i386-tdep.c (i386_register_virtual_type): New function.
1588 (i386_register_convertible): New function.
1589 * config/i386/tm-i386.h (REGISTER_VIRTUAL_TYPE): Redefine in terms
1590 of i386_register_virtual_type.
1591 (REGISTER_CONVERTIBLE): Redefine in terms of
1592 i386_register_convertible.
1593 (i386_register_virtual_type, i386_register_convertible): New
1598 * Makefile.in (mn10300-tdep.o): New rule.
1600 * Makefile.in (gdb_string_h): Define. Use it throughout.
1601 Some rules were already using this, even though it isn't defined.
1603 * Makefile.in (obstack_h, target_h): Define; these are already
1604 used elsewhere, but have been expanding to the empty string.
1605 (memattr_h): Define; needed by target_h.
1607 * mn10300-tdep.c (mn10300_extract_return_value): Mark this as
1608 static. (This was accidentally omitted from the earlier patch.)
1610 * mn10300-tdep.c (mn10300_dwarf2_reg_to_regnum): New function.
1611 (mn10300_gdbarch_init): Register it as the architecture's
1612 dwarf2_reg_to_regnum method.
1614 Correct and expand handling of `movm' instruction, and register
1616 * config/mn10300/tm-mn10300.h (D0_REGNUM, A0_REGNUM, MDRQ_REGNUM,
1617 MCRH_REGNUM, MCRL_REGNUM, MCVF_REGNUM): New definitions.
1618 (enum movm_register_bits): New enum.
1619 * mn10300-tdep.c (set_movm_offsets): Use symbolic names for the
1620 bits, not hex literals. Handle the `other', `exreg0', and
1621 `exother' bits. Correct handling of `exreg1': it saves r4, r5,
1622 r6, and r7, not r2, r3, r4, and r5.
1623 (saved_regs_size): New function.
1624 (mn10300_frame_chain, mn10300_frame_saved_pc): Use it, instead
1625 of computing the same thing inline, incorrectly.
1627 * mn10300-tdep.c (mn10300_gdbarch_init): We do have a
1628 dummy_breakpoint_offset; it's zero.
1630 * mn10300-tdep.c (mn10300_pop_frame): Split the mn10300-specific
1631 stuff out into mn10300_pop_frame_regular, and use
1632 generic_pop_current_frame. This lets us share code, and also
1633 makes this function's prototype match that expected by gdbarch.
1634 Make this function static.
1635 (mn10300_pop_frame_regular): New function.
1636 (mn10300_gdbarch_init): Register mn10300_pop_frame as the
1637 gdbarch's pop_frame method.
1638 * config/mn10300/tm-mn10300.h (POP_FRAME): Delete definition.
1639 (mn10300_pop_frame): Delete declaration.
1641 * mn10300-tdep.c (mn10300_saved_pc_after_call,
1642 mn10300_extract_return_value,
1643 mn10300_extract_struct_value_address, mn10300_store_return_value,
1644 mn10300_use_struct_convention, mn10300_breakpoint_from_pc,
1645 mn10300_frame_chain, mn10300_skip_prologue,
1646 mn10300_push_arguments, mn10300_push_return_address,
1647 mn10300_store_struct_return, mn10300_frame_saved_pc,
1648 mn10300_init_extra_frame_info, mn10300_frame_init_saved_regs):
1649 Make these functions static; they should only be visible to the
1650 outside world as gdbarch methods.
1652 * config/mn10300/tm-mn10300.h (mn10300_find_callers_reg): Delete
1655 * mn10300-tdep.c (mn10300_gdbarch_init): Put the gdbarch methods
1656 in some rational order.
1658 * mn10300-tdep.c (mn10300_gdbarch_init): Rather than using
1659 generic_pc_in_call_dummy, use pc_in_call_dummy_at_entry_point.
1661 Use gdbarch for most target parameters for the MN10300, rather
1662 than the tm-*.h file.
1663 * config/mn10300/tm-mn10300.h (MAX_REGISTER_VIRTUAL_SIZE,
1664 REGISTER_BYTES, FP_REGNUM, BREAKPOINT_FROM_PC,
1665 FUNCTION_START_OFFSET, DECR_PC_AFTER_BREAK, INNER_THAN,
1666 SAVED_PC_AFTER_CALL, INIT_EXTRA_FRAME_INFO, FRAME_INIT_SAVED_REGS,
1667 FRAME_CHAIN, FRAME_CHAIN_VALID, FRAME_SAVED_PC,
1668 EXTRACT_RETURN_VALUE, EXTRACT_STRUCT_VALUE_ADDRESS,
1669 STORE_RETURN_VALUE, STORE_STRUCT_RETURN, SKIP_PROLOGUE,
1670 FRAME_ARGS_SKIP, FRAME_ARGS_ADDRESS, FRAME_LOCALS_ADDRESS,
1671 FRAME_NUM_ARGS, POP_FRAME, USE_GENERIC_DUMMY_FRAMES, CALL_DUMMY,
1672 CALL_DUMMY_START_OFFSET, CALL_DUMMY_BREAKPOINT_OFFSET,
1673 CALL_DUMMY_LOCATION, FIX_CALL_DUMMY, CALL_DUMMY_ADDRESS,
1674 TARGET_READ_FP, PUSH_RETURN_ADDRESS, PUSH_DUMMY_FRAME,
1675 SAVE_DUMMY_FRAME_TOS, PUSH_ARGUMENTS, PC_IN_CALL_DUMMY,
1676 REG_STRUCT_HAS_ADDR, USE_STRUCT_CONVENTION, GET_SAVED_REGISTER):
1677 Delete definitions. We register gdbarch methods for these now.
1678 (struct frame_info, struct type, struct value): Delete forward
1679 declarations of these types; they're no longer necessary, since we
1680 don't have function declarations here any more.
1681 * mn10300-tdep.c: #include "arch-utils.h", to get declarations for
1682 some default gdbarch methods.
1683 (mn10300_store_struct_return): Return void, as expected by
1685 (mn10300_init_extra_frame_info): Take initial `fromleaf' argument,
1686 as expected by gdbarch.
1687 (mn10300_frame_init_saved_regs): Provide dummy definition for
1688 this, as required by gdbarch.
1689 (mn10300_gdbarch_init): Add mn10300_call_dummy_words, as expected
1690 by gdbarch. Register gdbarch methods or values for all the stuff
1691 removed from tm-10300.h, listed above.
1695 * cli-out.c (cli_begin, cli_end): Replace cli_list_begin and
1697 (cli_ui_out_impl): Update.
1699 * ui-out.c (default_begin, default_end): Replace
1700 default_list_begin and default_list_end.
1701 (default_ui_out_impl): Update.
1702 (uo_begin, uo_end): Replace ou_list_begin and uo_list_end.
1703 (ui_out_begin, ui_out_end): Replace ui_out_list_begin and
1705 (ui_out_list_begin, ui_out_list_end): New. Compatibility
1707 (struct ui_out_level): Add field type.
1708 (push_level, pop_level): Update. Add type parameter.
1710 * ui-out.h (enum ui_out_type): Declare.
1711 (ui_out_begin, ui_out_end): Declare.
1712 (ui_out_begin_ftype, ui_out_end_ftype): Replace list_begin_ftype
1714 (struct ui_out_impl): Update.
1718 * ui-out.h (list_begin_ftype, list_end_ftype): Rename argument
1719 ``list_flag'' to ``depth''.
1720 * ui-out.c (default_list_begin, default_list_end): Update.
1721 (uo_list_begin, uo_list_end): Update.
1722 (MAX_UI_OUT_LEVELS): Define.
1723 (struct ui_out_level): Define.
1724 (top-level): Include "gdb_assert.h".
1725 (struct ui_out): Add fields ``level'' and ``levels''. Delete
1726 fields ``list_flag'' and ``field_count''.
1727 (ui_out_new): Update.
1728 (verify_field_proper_position): Update.
1729 (current_level, push_level, pop_level): New functions.
1730 (ui_out_list_begin): Use push_level.
1731 (ui_out_list_end): Use pop_level.
1732 (ui_out_field_int): Use current_level.
1733 (ui_out_field_skip): Ditto.
1734 (ui_out_field_fmt): Ditto.
1738 * language.c (longest_local_hex_string_custom): Strlen test is
1739 inverted -- reverse the sense of the test.
1743 * config/i386/tm-i386v.h (struct frame_info, struct
1744 frame_saved_regs): Remove declarations.
1745 (i386_frame_num_args): Remove prototype.
1749 * MAINTAINERS: I'm no longer actively maintaining the mn10300
1754 * main.c (captured_main): Delete #ifndef _WIN32 conditional for
1759 * inferior.h (save_inferior_ptid): Declare.
1760 * infrun.c (save_inferior_ptid, restore_inferior_ptid): Define.
1762 * hpux-thread.c (save_inferior_ptid, restore_inferior_ptid):
1763 Delete these functions.
1764 * lin-lwp.c (save_inferior_ptid, restore_inferior_ptid): Likewise.
1765 * lin-thread.c (save_inferior_ptid, restore_inferior_ptid): Likewise.
1766 * linux-thread.c (save_inferior_ptid, restore_inferior_ptid):
1768 * proc-service.c (save_inferior_ptid, restore_inferior_ptid):
1770 * sol-thread.c (save_inferior_ptid, restore_inferior_ptid): Likewise.
1771 * thread-db.c (save_inferior_ptid, restore_inferior_ptid): Likewise.
1773 * somsolib.c (reset_inferior_ptid): Delete.
1774 (som_solib_remove_inferior_hook): Use save_inferior_ptid() to
1775 build the cleanup struct.
1777 * breakpoint.c (reattach_breakpoints, detach_breakpoints): Use
1778 a cleanup to save/restore inferior_ptid.
1782 Implement attach/detach for multi-threaded programs on Linux.
1783 * thread-db.c (keep_thread_db): Adjust comment.
1784 (deactivate_target): Removed.
1785 (thread_db_new_objfile): Don't call deactivate_target. Implement
1786 guts of deactivate_target inline instead.
1787 (attach_thread): Call ATTACH_LWP unconditionally if defined.
1788 (thread_db_attach): New function.
1789 (thread_db_detach): Don't call deactivate_target. Do necessary
1790 cleanup inline instead. Set inferior_ptid to LWP corresponding to
1791 the current user-level thread.
1792 (thread_db_kill): Set inferior_ptid to LWP corresponding to the
1793 current user-level thread.
1794 (thread_db_create_inferior): Deactivate target vector if
1795 KEEP_THREAD_DB is zero.
1796 (thread_db_mourn_inferior): Don't call deactivate_target. Do
1797 necessary cleanup inline instead.
1798 (init_thread_db_ops): Initialize to_attach field to
1800 * lin-lwp.c (lin_lwp_mourn_inferior): Remove prototype.
1801 (stop_wait_callback): Add prototype.
1802 (init_lwp_list): Add comment about when to re-initialize the LWP
1804 (lin_lwp_attach_lwp): Only call ptrace for cloned processes.
1805 Avoid adding publicates to the LWP list. Only mark an LWP as
1806 signalled if it doesn't correspond to a cloned process.
1807 (lin_lwp_attach): Add initial process to the LWP list. Make sure
1808 it's stopped and fake a SIGSTOP.
1809 (detach_callback): New function.
1810 (lin_lwp_detach): Implement.
1811 (lin_lwp_create_inferior): Don't re-initialize LWP list here.
1812 Call child_ops.to_create_inferior directly instead of via
1813 target_beneath local.
1814 (lin_lwp_mourn_inferior): Call child_ops.to_mourn_inferior
1815 directly instead of via target_beneath local.
1819 * symtab.c (lookup_symtab_1, lookup_partial_symtab): Use basename
1820 instead of non-portable search for `/'. Use FILENAME_CMP instead
1821 of STREQ, to account for case-insensitive filesystems.
1822 (top-level): #include "filenames.h".
1826 * breakpoint.c (check_duplicates): Use the breakpoint's type, not
1827 its address, to decide whether it's a watchpoint or not. Zero
1828 is a valid code address.
1829 (update_breakpoints_after_exec): Admonishing comments.
1830 * breakpoint.h (struct breakpoint): Doc fixes.
1832 * breakpoint.c (check_duplicates): Take a breakpoint object as an
1833 argument, rather than an address and section. All callers changed.
1837 * defs.h (ptid_t): New typedef.
1838 (pid_to_ptid, null_ptid, minus_one_ptid, ptid_equal): New macros.
1840 * a68v-nat.c, alphabsd-nat.c, arch-utils.c, arm-linux-nat.c,
1841 blockframe.c, breakpoint.c, breakpoint.h,
1842 config/i386/nm-i386sol2.h, config/i386/tm-i386sco5.h,
1843 config/ia64/nm-linux.h, config/m68k/nm-hp300bsd.h,
1844 config/mips/nm-irix4.h, config/mips/nm-irix5.h,
1845 config/pa/nm-hppah.h, config/pa/tm-hppa.h,
1846 config/rs6000/nm-rs6000.h, config/sparc/nm-sun4sol2.h,
1847 corelow.c, cxux-nat.c, d10v-tdep.c, dink32-rom.c,
1848 dve3900-rom.c, fork-child.c, frame.c, gnu-nat.c, go32-nat.c,
1849 hp300ux-nat.c, hppa-tdep.c, hppab-nat.c, hppah-nat.c,
1850 hpux-thread.c, i386-linux-nat.c, i386aix-nat.c, i386b-nat.c,
1851 i386bsd-nat.c, i386gnu-nat.c, i386mach-nat.c, i386nbsd-nat.c,
1852 infcmd.c, inferior.h, inflow.c, infptrace.c, infrun.c,
1853 inftarg.c, infttrace.c, lin-lwp.c, lin-thread.c,
1854 linux-thread.c, lynx-nat.c, m3-nat.c, m32r-rom.c,
1855 m68knbsd-nat.c, m88k-nat.c, mac-nat.c, mips-nat.c,
1856 mon960-rom.c, monitor.c, ns32knbsd-nat.c, ocd.c, ppc-bdm.c,
1857 ppcnbsd-nat.c, proc-service.c, procfs.c, ptx4-nat.c,
1858 regcache.c, remote-adapt.c, remote-array.c, remote-bug.c,
1859 remote-e7000.c, remote-es.c, remote-mips.c, remote-mm.c,
1860 remote-nindy.c, remote-os9k.c, remote-rdi.c, remote-rdp.c,
1861 remote-sds.c, remote-sim.c, remote-st.c, remote-udi.c,
1862 remote-vx.c, remote.c, rs6000-nat.c, sol-thread.c,
1863 solib-aix5.c, solib-svr4.c, somsolib.c, sparc-nat.c,
1864 standalone.c, sun3-nat.c, sun386-nat.c, symm-nat.c, target.c,
1865 target.h, thread-db.c, thread.c, top.c, ultra3-nat.c,
1866 uw-thread.c, v850ice.c, win32-nat.c, wince.c, xcoffsolib.c
1867 (inferior_pid): Rename to inferior_ptid everywhere - even in
1868 comments and obsolete ports. In cases where this variable
1869 really is supposed to be used as a process id, use PIDGET() to
1870 extract the process id component from inferior_ptid. The
1871 other cases, either involving other variables whose types had
1872 to be changed or functions whose signatures had to changed
1873 are listed separately below.
1875 * arm-linux-nat.c (get_thread_id): Change type of argument
1876 representing a combined process/thread id from ``int'' to
1877 ``ptid_t''. Also change parameter name to ptid.
1878 * breakpoint.h, breakpoint.c (breakpoint_thread_match): Likewise.
1879 * corelow.c (core_file_thread_alive): Likewise.
1880 * d10v-tdep.c (d10v_read_pc, d10v_write_pc): Likewise.
1881 * defs.h (*target_wait_hook): Likewise.
1882 * gdbthread.h (thread_info, delete_thread, pid_to_thread_id)
1883 (find_thread_pid, save_infrun_state, load_infrun_state): Likewise.
1884 * gnu-nat.c (gnu_thread_alive, gnu_pid_to_str, gnu_wait)
1885 (gnu_resume): Likewise.
1886 * go32-nat.c (go32_wait, go32_resume): Likewise.
1887 * h8500-tdep.c (h8500_read_pc, h8500_write_pc): Likewise.
1888 * hppa-tdep.c (target_read_pc, target_write_pc): Likewise.
1889 * hppah-nat.c (child_pid_to_str, hppa_tid_to_str,
1890 (hppa_pid_or_tid_to_str, child_post_startup_inferior)
1891 (child_thread_alive): Likewise.
1892 * hpux-thread.c (hpux_thread_notice_signals, hpux_thread_alive)
1893 (hpux_pid_to_str, hpux_thread_wait, hpux_thread_resume): Likewise.
1894 * i386-linux-nat.c (child_resume): Likewise.
1895 * ia64-linux-nat.c (enable_watchpoints_in_psr, fetch_debug_register)
1896 (store_debug_register, fetch_debug_register_pair)
1897 (store_debug_register_pair, ia64_linux_insert_watchpoint)
1898 (ia64_linux_remove_watchpoint, ia64_linux_stopped_by_watchpoint):
1900 * ia64-tdep.c (ia64_read_pc, ia64_write_pc): Likewise.
1901 * inferior.h (read_pc_pid, generic_target_read_pc, write_pc_pid)
1902 (generic_target_write_pc, ptrace_wait, child_resume)
1903 (get_last_target_status): Likewise.
1904 * infptrace.c (ptrace_wait, child_resume): Likewise.
1905 * inftarg.c (child_wait, child_post_wait, child_thread_live)
1906 (child_pid_to_str): Likewise.
1907 * infttrace.c (ptrace_wait, child_thread_alive, child_resume)
1908 (hppa_pid_or_tid_to_str, child_post_startup_inferior): Likewise.
1909 * lin-lwp.c (add_lwp, delete_lwp, find_lwp_pid, lin_lwp_attach_lwp)
1910 (lin_lwp_resume, lin_lwp_wait, lin_lwp_thread_alive)
1911 (lin_lwp_pid_to_str): Likewise.
1912 * lin-thread.c (thread_db_alive, thread_db_pid_to_str)
1913 (thread_db_resume, thread_db_wait): Likewise.
1914 * linux-thread.c (linuxthreads_thread_alive, linuxthreads_pid_to_str)
1915 (linuxthreads_resume, linuxthreads_wait): Likewise.
1916 * lynx-nat.c (child_wait, child_thread_alive, child_resume)
1917 (child_pid_to_str): Likewise.
1918 * m3-nat.c (mach_really_wait, m3_resume): Likewise.
1919 * mac-nat.c (child_wait, child_resume): Likewise.
1920 * mips-tdep.c (mips_read_pc): Likewise.
1921 * monitor.c (monitor_wait, monitor_resume): Likewise.
1922 * ocd.c, ocd.h (ocd_thread_alive, ocd_resume): Likewise.
1923 * ppc-bdm.c (bdm_ppc_wait): Likewise.
1924 * procfs.c (do_attach, procfs_wait, procfs_resume)
1925 (procfs_notice_signals, procfs_thread_alive, procfs_pid_to_str)
1926 (procfs_set_watchpoint, procfs_stopped_by_watchpoint)
1927 (procfs_find_LDT_entry): Likewise.
1928 * regcache.c (read_register_pid, read_signed_register_pid)
1929 (write_register_pid, generic_target_read_pc, read_pc_pid)
1930 (generic_target_write_pc, write_pc_pid): Likewise.
1931 * regcache.h (read_register_pid, read_signed_register_pid)
1932 (write_register_pid): Likewise.
1933 * remote-adapt.c (adapt_wait, adapt_resume): Likewise.
1934 * remote-array.c (array_wait, array_resume): Likewise.
1935 * remote-bug.c (bug_wait, bug_resume): Likewise.
1936 * remote-e7000.c (e7000_wait, e7000_resume): Likewise.
1937 * remote-eb.c (eb_wait, eb_resume): Likewise.
1938 * remote-es.c (es1800_wait, es1800_resume): Likewise.
1939 * remote-mips.c (mips_wait, mips_resume): Likewise.
1940 * remote-mm.c (mm_wait, mm_resume): Likewise.
1941 * remote-nindy.c (nindy_wait, nindy_resume): Likewise.
1942 * remote-os9k.c (rombug_wait, rombug_resume): Likewise.
1943 * remote-rdi.c (arm_rdi_wait, arm_rdi_resume): Likewise.
1944 * remote-rdp.c (remote_rdp_resume, remote_rdp_wait): Likewise.
1945 * remote-sds.c (sds_wait, sds_resume): Likewise.
1946 * remote-sim.c (gdbsim_wait, gdbsim_resume): Likewise.
1947 * remote-st.c (st2000_wait, st2000_resume): Likewise.
1948 * remote-udi.c (udi_wait, udi_resume): Likewise.
1949 * remote-vx.c (vx_wait, vx_resume): Likewise.
1950 * remote.c (remote_current_thread, remote_resume, remote_wait)
1951 (remote_async_resume, remote_async_wait, remote_cisco_wait)
1952 (remote_thread_alive): Likewise.
1953 * sol-thread.c (thread_to_lwp, lwp_to_thread, sol_thread_resume)
1954 (sol_thread_wait, sol_thread_notice_signals, sol_thread_alive)
1955 (solaris_pid_to_str): Likewise.
1956 * symm-nat.c (child_wait, child_resume): Likewise.
1957 * target.c (debug_to_resume, debug_to_wait, debug_to_post_wait)
1958 (debug_to_notice_signals, debug_to_thread_alive)
1959 (normal_target_post_startup_inferior, normal_pid_to_str)
1960 (debug_to_post_startup_inferior): Likewise.
1961 * target.h (to_resume, to_wait, to_post_wait)
1962 (to_post_startup_inferior, to_notice_signals, to_thread_alive)
1963 (to_pid_to_str [all in struct target_ops]): Likewise.
1964 (child_post_wait, child_thread_alive, normal_pid_to_str): Likewise.
1965 * thread-db.c (thread_from_lwp, lwp_from_thread, thread_db_wait)
1966 (attach_thread, detach_thread, thread_db_resume, check_event)
1967 (thread_db_post_startup_inferior, thread_db_thread_alive)
1968 (thread_db_pid_to_str): Likewise.
1969 * thread.c (add_thread, delete_thread, find_thread_pid)
1970 (pid_to_thread_id, in_thread_list, load_infrun_state)
1971 (save_infrun_state, switch_to_thread, restore_current_thread)
1972 (make_cleanup_restore_current_thread): Likewise.
1973 * top.c (target_wait_hook): Likewise.
1974 * uw-thread.c (dbgpid, thr_to_lwp, lwp_to_thr, add_thread_uw)
1975 (uw_thread_resume, libtrhead_stub, uw_thread_wait, uw_thread_alive)
1976 (uw_thread_pid_to_str): Likewise.
1977 * v850ice.c (v850ice_wait, v850ice_resume): Likewise.
1978 * win32-nat.c (child_wait, child_resume, win32_child_thread_alive)
1979 (cywin_pid_to_str): Likewise.
1980 * wince.c (child_wait, child_resume, win32_child_thread_alive):
1982 * config/nm-linux.h (linuxthreads_pid_to_str): Likewise.
1983 * config/nm-lynx.h (child_wait, lynx_pid_to_str): Likewise.
1984 * config/alpha/nm-linux.h (lin_lwp_attach_lwp): Likewise.
1985 * config/arm/nm-linux.h (lin_lwp_attach_lwp): Likewise.
1986 * config/h8500/tm-h8500.h (h8500_read_pc, h8500_write_pc): Likewise.
1987 * config/i386/nm-i386sol2.h (procfs_stopped_by_watchpoint)
1988 (procfs_set_watchpoint): Likewise.
1989 * config/i386/nm-linux.h (lin_lwp_attach_lwp): Likewise.
1990 * config/i386/nm-ptx4.h (child_wait): Likewise.
1991 * config/i386/nm-symmetry.h (child_wait): Likewise.
1992 * config/i386/tm-cygwin.h (cygwin_pid_to_str): Likewise.
1993 * config/ia64/nm-linux.h (ia64_linux_stopped_by_watchpoint)
1994 (ia64_linux_insert_watchpoint, ia64_linux_remove_watchpoint)
1995 (lin_lwp_attach_lwp): Likewise.
1996 * config/mips/nm-irix4.h, config/mips/nm-irix5.h
1997 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Likewise.
1998 * config/pa/nm-hppah.h (child_pid_to_str, hppa_tid_to_str)
1999 (hppa_pid_or_tid_to_str): Likewise.
2000 * config/pa/tm-hppa.h (target_read_pc, target_write_pc): Likewise.
2001 * config/powerpc/nm-linux.h (lin_lwp_attach_lwp): Likewise.
2002 * config/sparc/nm-sun4sol2.h (procfs_stopped_by_watchpoint)
2003 (procfs_set_watchpoint): Likewise.
2005 * gdbthread.h (thread_id_to_pid): Change return type which
2006 represents a combined process/thread id from ``int'' to
2008 * gnu-nat.c (gnu_wait): Likewise.
2009 * go32-nat.c (go32_wait): Likewise.
2010 * hpux-thread.c (hpux_thread_wait): Likewise.
2011 * inferior.h (procfs_first_available): Likewise.
2012 * inftarg.c (child_wait): Likewise.
2013 * infttrace.c (ptrace_wait): Likewise.
2014 * lin-lwp.c (lin_lwp_wait): Likewise.
2015 * lin-thread.c (thread_db_wait): Likewise.
2016 * linux-thread.c (linuxthreads_wait): Likewise.
2017 * lynx-nat.c (child_wait): Likewise.
2018 * m3-nat.c (mach_really_wait): Likewise.
2019 * mac-nat.c (child_wait): Likewise.
2020 * monitor.c (monitor_wait): Likewise.
2021 * ppc-bdm.c (bdm_ppc_wait): Likewise.
2022 * procfs.c (do_attach, procfs_wait, procfs_first_available): Likewise.
2023 * remote-adapt.c (adapt_wait): Likewise.
2024 * remote-array.c (array_wait): Likewise.
2025 * remote-bug.c (bug_wait): Likewise.
2026 * remote-e7000.c (e7000_wait): Likewise.
2027 * remote-eb.c (eb_wait): Likewise.
2028 * remote-es.c (es1800_wait): Likewise.
2029 * remote-mips.c (mips_wait): Likewise.
2030 * remote-mm.c (mm_wait): Likewise.
2031 * remote-nindy.c (nindy_wait): Likewise.
2032 * remote-os9k (rombug_wait): Likewise.
2033 * remote-rdi.c (arm_rdi_wait): Likewise.
2034 * remote-rdp.c (remote_rdp_wait): Likewise.
2035 * remote-sds.c (sds_wait): Likewise.
2036 * remote-sim.c (gdbsim_wait): Likewise.
2037 * remote-st.c (st2000_wait): Likewise.
2038 * remote-udi.c (udi_wait): Likewise.
2039 * remote-vx.c (vx_wait): Likewise.
2040 * remote.c (remote_wait, remote_async_wait, remote_current_thread)
2041 (remote_cisco_wait): Likewise.
2042 * sol-thread.c (thread_to_lwp, lwp_to_thread, sol_thread_wait):
2044 * symm-nat.c (child_wait): Likewise.
2045 * target.c (debug_to_wait): Likewise.
2046 * target.h (to_wait [in struct target_ops]): Likewise.
2047 * thread.c (thread_id_to_pid): Likewise.
2048 * thread-db.c (thread_from_lwp, lwp_from_thread, thread_db_wait):
2050 * top.c (*target_wait_hook): Likewise.
2051 * uw-thread.c (lwp_to_thr, uw_thread_wait): Likewise.
2052 * v850ice.c (v850ice_wait): Likewise.
2053 * win32-nat.c (child_wait): Likewise.
2054 * wince.c (child_wait): Likewise.
2055 * config/nm-lynx.h (child_wait): Likewise.
2056 * config/i386/nm-ptx4.h (child_wait): Likewise.
2057 * config/i386/nm-symmetry.h (child_wait): Likewise.
2059 * arch-utils.c (generic_prepare_to_proceed): Rename wait_pid
2060 to wait_ptid and change its type from ``int'' to ``ptid_t''.
2061 * breakpoint.c (reattach_breakpoints, detach_breakpoints): Likewise,
2062 but rename saved_inferior_pid to saved_inferior_ptid.
2063 * d10v-tdep.c (d10v_read_pc, d10_write_pc): Likewise, but rename
2064 save_pid to save_ptid.
2065 * gdbthread.h (struct thread_info): Likewise, but rename pid to ptid.
2066 * hppah-nat.c (child_pid_to_exec): Likewise, but rename
2067 saved_inferior_pid to saved_inferior_ptid.
2068 * hpux-thread.c (main_ptid): Likewise, but rename from main_pid.
2069 * infrun.c (previous_inferior_pid [static global]): Likewise,
2070 but rename to previous_inferior_ptid.
2071 (resume): Likewise, but rename resume_pid to resume_ptid.
2072 (struct execution_control_state): Likewise, but rename
2073 pid to ptid, saved_inferior_pid to saved_inferior_ptid,
2074 and waiton_pid to waiton_ptid.
2075 (target_last_wait_pid): Likewise, but rename to
2076 target_last_wait_ptid.
2077 * infttrace.c (saved_real_pid): Likewise, but rename to
2079 (child_pid_to_exec_file): Likewise, but rename saved_inferior_pid
2080 to saved_inferior_ptid.
2081 * lin-lwp.c (struct lwp_info): Likewise, but rename pid to ptid.
2082 (trap_ptid): Likewise, but renamed from trap_pid.
2083 * lin-thread.c (handle_new_thread): Likewise, but rename gdb_pid
2085 * linux-thread.c (detach_thread): Likewise, but rename pid to ptid.
2086 (thread_db_wait): Likewise, but rename ret_pid to retptid.
2087 * procfs.c (procfs_wait): Likewise, for retval whose name
2088 doesn't change. Also, ``temp'' becomes two separate variables,
2089 one named temp_tid (an int) and the other temp_ptid.
2090 (procfs_notice_thread): Likewise (type change) for gdb_threadid
2091 whose name does not change.
2092 * regcache.c (registers_ptid): Likewise, but renamed from
2094 (read_register_pid, read_signed_register_pid, write_register_pid):
2095 Likewise, but rename save_pid to save_ptid.
2096 (read_pc_pid, write_pc_pid): Likewise, but rename saved_inferior_pid
2097 to saved_inferior_ptid.
2098 * remote.c (remote_newthread_step): Likewise, but rename pid to ptid.
2099 * sol-thread.c (struct ps_prochandle): Likewise.
2100 (sol_thread_resume): Likewise, for save_pid which becomes save_ptid.
2101 (sol_thread_wait): Likewise, for rtnval whose name does not
2102 change, and for save_pid which becomes save_ptid.
2103 (solaris_pid_to_str): Likewise for lwp whose name does not change.
2104 (sol_find_new_threads_callback): Likewise, for pid which becomes
2106 * target.h (target_resume, target_wait, target_post_wait)
2107 (target_post_startup_inferior, target_notice_signals)
2108 (target_thread_alive): Likewise.
2109 * thread.c (info_threads_command): Likewise, but rename
2110 current_pid to current_ptid.
2111 (struct current_thread_cleanup): Likewise, but rename field
2112 inferior_pid to inferior_ptid.
2113 * thread-db.c (find_new_threads_callback): Likewise, but rename
2115 * uw-thread.c (thr_to_lwp): Likewise for lid whose name does not
2117 (lwp_to_tr): Likewise fo tid whose name remains unchanged.
2118 (thr_infpid, lwp_infpid, notice_thread, libthread_stub): Likewise,
2119 but rename pid to ptid.
2120 * config/alpha/nm-linux.h (ATTACH_LWP): Likewise.
2121 * config/arm/nm-linux.h (ATTACH_LWP): Likewise.
2122 * config/i386/nm-linux.h (ATTACH_LWP): Likewise.
2123 * config/ia64/nm-linux.h (ATTACH_LWP): Likewise.
2124 * config/pa/nm-hppah.h (target_tid_to_str): Likewise.
2125 * config/powerpc/nm-linux.h (ATTACH_LWP): Likewise.
2127 * arch-utils.c (generic_prepare_to_proceed): Test for the
2128 "zero" ptid by using ptid_equal() to test to see if variable
2129 in question is the same as null_ptid. This replaces a direct
2131 * cxux-nat.c (add_shared_symbol_files): Likewise.
2132 * i386aix-nat.c, i386b-nat.c (i386_float_info): Likewise.
2133 * infcmd.c (run_command): Likewise.
2134 * inflow.c (kill_command): Likewise.
2135 * infttrace.c (call_ttrace): Likewise.
2136 * lin-lwp.c (lin_lwp_prepare_to_proceed): Likewise.
2137 * lin-thread.c (thread_db_kill): Likewise.
2138 * procfs.c (procfs_kill_inferior, procfs_mourn_inferior): Likewise.
2139 * remote-es.c (es1800_kill): Likewise.
2140 * sol-thread.c (sol_thread_create_inferior): Likewise.
2141 * solib.c (locate_base): Likewise.
2142 * target.c (nosupport_runtime): Likewise.
2143 * thread-db.c (thread_db_wait): Likewise.
2144 * top.c (quit_confirm, quit_force): Likewise.
2145 * uw-thread (lwp_infpid, uw_thread_resume): Likewise.
2147 * infrun.c (handle_inferior_event, stop_stepping, normal_stop):
2148 Use ptid_equal to compare value of process/thread ids instead of
2149 ``=='' and ``!='' operators.
2150 lin-lwp.c (delete_lwp, lin_lwp_prepare_to_proceed)
2151 (stop_wait_callback, lin_lwp_wait): Likewise.
2152 * procfs.c (procfs_wait): Likewise.
2153 * regcache.c (read_register_bytes, read_register_gen)
2154 (write_register_gen, read_register, read_register_pid)
2155 (read_signed_register, read_signed_register_pid, write_register)
2156 (write_register_pid, supply_register): Likewise.
2157 * remote-vx.c (vx_resume): Likewise.
2158 * sol-thread.c (sol_thread_wait): Likewise.
2159 * symm-nat.c (kill_inferior): Likewise.
2160 * thread.c (delete_thread, find_thread_pid, pid_to_thread_id)
2161 (in_thread_list, info_threads_command, switch_to_thread)
2162 (restore_current_thread): Likewise.
2163 * uw-thread (libtread_stub): Likewise.
2165 * arm-linux-nat.c (GET_THREAD_ID): Change PID to PTID.
2167 * corelow.c (add_to_thread_list): Convert argument in add_thread()
2169 * gnu-nat.c (inf_validate_procs): Likewise.
2170 * linux-thread.c (stop_thread, update_stop_threads): Likewise.
2171 * remote.c (record_currthread, remote_threads_info): Likewise.
2172 * win32-nat.c (child_add_thread): Likewise.
2174 * hpux-thread.c (save_inferior_pid, restore_inferior_pid): Rename,
2175 respectively, to save_inferior_ptid() and restore_inferior_ptid().
2176 Adjust implementations to operate on ``ptid_t'' instead of ``int''.
2177 * lin-lwp.c (save_inferior_pid, restore_inferior_pid): Likewise.
2178 * lin-thread.c (save_inferior_pid, restore_inferior_pid): Likewise.
2179 * linux-thread.c (save_inferior_pid, restore_inferior_pid): Likewise.
2180 * proc-service.c (save_inferior_pid, restore_inferior_pid): Likewise.
2181 * sol-thread.c (save_inferior_pid, restore_inferior_pid): Likewise.
2182 * thread-db.c (save_inferior_pid, restore_inferior_pid): Likewise.
2184 * infrun.c (RESUME_ALL): New macro representing the -1 ptid
2185 to be passed to target_resume() when all threads should resume.
2186 (resume): Set resume_ptid to RESUME_ALL rather than -1.
2187 (handle_inferior_event): Invoke target_resume() with RESUME_ALL
2189 * irix5-nat.c (solib_create_inferior_hook): Convert -1 to
2190 a ptid_t in target_resume() call.
2191 * osfsolib.c (solib_create_inferior_hook): Likewise.
2192 * solib-svr4.c (solib_create_inferior_hook): Likewise.
2194 * lin-lwp.c (PIDGET, PIDGET0): Rename original PIDGET macro to
2195 PIDGET0. Define new PIDGET macro which uses PIDGET0, the only
2196 difference being that the 0xffff pattern will be interpreted
2198 * lin-thread.c (PIDGET, PIDGET0): Likewise.
2199 * thread-db.c (PIDGET, PIDGET0): Likewise.
2200 * config/nm-linux.h (PIDGET, PIDGET0): Likewise.
2201 * config/i386/tm-i386sol2.h (PIDGET, PIDGET0): Likewise.
2202 * config/i386/tm-i386v42mp.h (PIDGET, PIDGET0): Likewise.
2203 * config/sparc/tm-sun4sol2.h (PIDGET, PIDGET0): Likewise.
2205 * m3-nat.c (init_m3_ops): Fix typo; initialize to_wait field to
2206 mach_really_wait rather than mach_really__wait.
2207 * lin-thread.c (check_for_thread_event): Fix warning; make function
2208 actually return a value.
2210 * gdbarch.sh (TARGET_READ_PC, TARGET_WRITE_PC): Change type of
2211 ``pid'' arguments from ``int'' to ``ptid_t''. Also renamed
2213 * gdbarch.h, gdbarch.c: Regenerated.
2217 * rdi-share/devsw.c: Include <time.h> for struct tm
2221 * config/djgpp/fnchange.lst: Add mappings for the new
2222 opcodes/openrisc-* files.
2226 * lin-lwp.c: Change printf to fprintf_unfiltered.
2227 * Makefile.in: Add rules for thread-db.o, lin-lwp.o, proc-service.o.
2231 * config/rs6000/tm-rs6000.h (IN_SOLIB_RETURN_TRAMPOLINE): Define.
2232 (rs6000_in_solib_return_trampoline): Declare.
2233 * rs6000-tdep.c (rs6000_in_solib_return_trampoline): New
2235 (rs6000_skip_trampoline_code): Skip bigtoc fixup code.
2236 * xcoffread.c (read_xcoff_symtab): Perform the ISFCN function
2237 check after the CSECT check rather than before it. Allocate
2238 separate symtabs for CSECTs whose names begin with '@'.
2239 (scan_xcoff_symtab): Don't ignore symbols beginning with '@'.
2240 Activate the misc_func_recorded mechanism for whose names begin
2245 * ppcnbsd-nat.c (fetch_inferior_registers)
2246 (store_inferior_registers, fetch_core_registers): Changed to use
2247 fpreg[] instead of r_regs[] to access floating point registers.
2251 * sh-tdep.c: Get rid of the function prototypes.
2252 (sh_sh4_build_float_register_type): Move earlier in file.
2253 (fv_reg_base_num): Ditto.
2254 (dr_reg_base_num): Ditto.
2258 * thread-db.c: Revert 2001-04-26 change for debugging output.
2260 * lin-lwp.c: Add set/show debug lin-lwp command. Use this
2261 command to turn extra debugging output on / off.
2265 * buildsym.c (start_subfile): Use FILENAME_CMP instead of STREQ.
2266 (top-level): #include filenames.h.
2268 * dwarf2read.c (dwarf2_start_subfile): Use IS_ABSOLUTE_PATH and
2269 FILENAME_CMP, to DTRT on non-Posix platforms.
2270 (top-level): #include filenames.h.
2275 * gdbtypes.c (check_stub_method): Always initialize ``p''.
2279 * configure.host: Delete romp host.
2284 * TODO: Updates to 5.1. No more targets to obsolete.
2288 (Changes from Kevin Buettner, with minor update by Don Howard.)
2290 * i387-nat.c (i387_supply_fxsave, i387_fill_fxsave, i387_tag): Fix
2291 typos in which hexadecimal constants were really intended to be
2293 (i387_tag): Swap logic regarding zero vs non-zero exponents.
2294 * MAINTAINERS (Misc): Added myself to the write-after-approval
2299 (Changes from Daniel Berlin, with revisions by Jim Blandy.)
2301 Abstract out operations specific to particular C++ ABI's, and
2302 invoke them through a function table. This removes the C++ ABI
2303 dependencies scattered throughout the code, and allows us to
2304 cleanly add support for new C++ ABI's.
2305 * cp-abi.h, cp-abi.h, gnu-v2-abi.c, hpacc-abi.c: New files.
2306 * c-typeprint.c, c-valprint.c, dbxread.c, eval.c, gdbtypes.c,
2307 jv-typeprint.c, linespec.c, symtab.c, typeprint.c, valops.c:
2308 #include "cp-abi.h". These files all use functions now declared
2310 * symtab.h (OPNAME_PREFIX_P, VTBL_PREFIX_P, DESTRUCTOR_PREFIX_P):
2311 Deleted. These services are now provided by functions declared in
2313 * value.h (value_rtti_type, value_virtual_fn_field): Same.
2314 * values.c (value_virtual_fn_field): Same, for this definition.
2315 * valops.c (value_rtti_type): Same.
2316 * c-typeprint.c (c_type_print_base): Use the functions from
2317 "cp-abi.h", instead of the old macros, or hard-coded ABI-specific
2319 * dbxread.c (record_minimal_symbol): Same.
2320 * gdbtypes.c (get_destructor_fn_field, virtual_base_index,
2321 virtual_base_index_skip_primaries): Same.
2322 * jv-typeprint.c (java_type_print_base): Same.
2323 * linespec.c (find_methods, decode_line_1): Same.
2324 * symtab.c (gdb_mangle_name): Same.
2325 * Makefile.in (SFILES): Add the new .c files mentioned above.
2326 (cp_abi_h): New variable.
2327 (COMMON_OBS): Add gnu-v2-abi.o, hpacc-abi.o, and cp-abi.o.
2328 (cp-abi.o, gnu-v2-abi.o, hpacc-abi.o): New targets.
2329 (c-typeprint.o, c-valprint.o, dbxread.o, eval.o, gdbtypes.o,
2330 jv-typeprint.o, symtab.o, linespec.o, typeprint.o, valops.o): Add
2331 dependency on $(cp_abi_h).
2335 * thread-db.c (_initialize_thread_db): Add set/show command
2336 "debug-linux-threads" for debugging output.
2337 * lin-lwp.c (various): Use global "debug_linux_threads to
2338 turn on extra debugging output.
2339 * lin-lwp.c: Minor cleanups in comments.
2340 * target.c (normal_pid_to_str): Get rid of an ancient hack.
2341 * remote.c (remote_pid_to_str): New function for remote target.
2345 * c-typeprint.c (c_type_print_cv_qualifier): Don't print `const'
2346 qualifier on C++ references; all references are innately const.
2350 * event-top.h: Fix formatting.
2354 * source.c (openp): Obsolete #ifdef MPW code.
2355 (open_source_file): Ditto.
2356 * event-top.c (display_gdb_prompt): Ditto.
2357 * utils.c (query): Ditto.
2358 (init_page_info): Ditto.
2359 (init_page_info): Delete #ifndef MPW.
2360 * top.c (gdb_readline): Ditto.
2361 * mac-xdep.c: Obsolete.
2362 * mac-gdb.r: Obsolete.
2363 * config/powerpc/xm-mpw.h: Obsolete.
2364 * config/xm-mpw.h: Obsolete.
2365 * mpw-make.sed: Obsolete.
2366 * mpw-config.in: Obsolete.
2372 * i386-tdep.c (i386_frameless_function_invocation): New function.
2373 * config/i386/tm-i386.h (FRAMELESS_FUNCTION_INVOCATION): Redefine
2374 in terms of i386_frameless_function_invocation. Adjust comment.
2375 (i386_frameless_function_invocation): New prototype.
2379 * top.c (gdb_init): Don't call cli_out_new() to
2380 create global uiout if init_ui_hook is set. uiout will
2381 have to be initialized there.
2385 * arch-utils.c: Include "regcache.h".
2389 * i386-tdep.c (i386_saved_pc_after_call): New function.
2390 * config/i386/tm-i386.h (SAVED_PC_AFTER_CALL): Redefine in terms
2391 of i386_saved_pc_after_call.
2392 (i386_saved_pc_after_call): New prototype.
2396 * i386-nat.c: Fix typo in comment.
2397 * solib.c (no_shared_libraries): New function. Discard all symbols
2398 from shared libraries.
2399 (_initialize_solib): Add command "nosharedlibrary" as complement
2400 to the command "sharedlibrary". Unloads symbols for all solibs.
2404 * configure.host (m68030-sony-*, m68*-isi-*, m68*-sony-*):
2405 * configure.tgt (m68*-rom68k-*, m68*-*bug-*, m68*-monitor-*)
2406 (m68*-est-*, m68*-sony-*, m68*-isi-*):
2407 * Makefile.in (xm-news1000.h, tm-news.h, xm-news.h): Obsolete..
2408 * config/m68k/xm-news.h: Obsolete.
2409 * config/m68k/tm-news.h:
2410 * config/m68k/xm-news1000.h: Obsolete.
2411 * config/m68k/news.mh: Obsolete.
2412 * config/m68k/news.mt: Obsolete.
2413 * config/m68k/nm-news.h: Obsolete.
2414 * config/m68k/news1000.mh: Obsolete.
2415 * news-xdep.c: Obsolete.
2416 * Makefile.in (isi-xdep.o): Obsolete.
2417 (ALLDEPFILES): Delete isi-xdep.c.
2418 (tm-isi.h): Obsolete.
2419 * m68k-tdep.c (altos_skip_prologue): Update comments.
2420 (isi_skip_prologue): Obsolete.
2421 * isi-xdep.c: Obsolete.
2422 * config/m68k/xm-isi.h: Obsolete.
2423 * config/m68k/isi.mh: Obsolete.
2424 * config/m68k/tm-isi.h: Obsolete.
2425 * config/m68k/isi.mt: Obsolete.
2432 * remote.c (remote_open_1): On opening the remote target, activate
2433 the solib_create_inferior_hook, so that it can detect when the
2434 target loads shared libraries.
2435 (remote_async_open_1): Ditto.
2439 * breakpoint.c (print_one_breakpoint): Handle 64-bit addresses.
2440 * tracepoint.c (tracepoints_info): Handle 64-bit addresses.
2441 * testsuite/gdb.trace/deltrace.exp: Allow for 64-bit addresses.
2442 * testsuite/gdb.trace/infotrace.exp: Ditto.
2443 * testsuite/gdb.trace/passcount.exp: Ditto.
2444 * testsuite/gdb.trace/while-stepping.exp: Ditto.
2448 * thread-db.c (check_thread_signals): When looping over all
2449 signals, ignore signal zero.
2450 (disable_thread_signals): Ditto.
2454 * thread.c (do_captured_thread_select): Allow the argument to the
2455 thread command to be an expression rather than a literal integer.
2459 * i386-linux-tdep.c (i386_linux_saved_pc_after_call): Use
2460 read_memory_unsigned_integer instead of read_memory_integer.
2464 * solib-aix5.c (map_index_vs_section_name_okay): New function.
2465 (aix5_relocate_main_executable): Don't use file offsets for
2466 determining corresponding sections and map file entries. Call
2467 map_index_vs_section_name_okay() to do this instead.
2471 * procfs.c (open_with_retry): New function.
2472 (open_procinfo_files, load_syscalls, proc_iterate_over_mappings)
2473 (proc_get_LDT_entry): Call open_with_retry() instead of open().
2477 * ia64-linux-nat.c (ia64_linux_stopped_by_watchpoint): Adjust
2478 comparison against TRAP_HWBKPT constant yet again to account
2479 for the various values used by different kernel versions.
2483 * demangle.c (_initialize_demangler): Use xcalloc on the
2484 demangling_style_names, and make it a null terminated array of
2485 names, to avoid a crash.
2489 * i386-tdep.c (i386_frame_chain): New function.
2490 * config/i386/tm-i386.h (FRAME_CHAIN): Redefine in terms of
2492 (i386_frame_chain): New prototype.
2496 * target.h (target_ops): Removed to_core_file_to_sym_file vector
2498 * corelow.c (core_ops): Updated for above change.
2499 * gnu-nat.c (core_ops): Likewise.
2500 * inftarg.c (child_ops): Likewise.
2501 * monitor.c (monitor_ops): Likewise.
2502 * ppc-bdm.c (bdm_ppc_ops): Likewise.
2503 * remote-adapt.c (adapt_ops): Likewise.
2504 * remote-bug.c (bug_ops): Likewise.
2505 * remote-e7000.c (e7000_ops): Likewise.
2506 * remote-eb.c (eb_ops): Likewise.
2507 * remote-es.c (es1800_ops, es1800_child_ops): Likewise.
2508 * remote-mm.c (mm_ops): Likewise.
2509 * remote-nindy.c (nindy_ops): Likewise.
2510 * remote-nrom.c (nrom_ops): Likewise.
2511 * remote-os9k.c (rombug_ops): Likewise.
2512 * remote-rdp.c (remote_rdp_ops): Likewise.
2513 * remote-sim.c (gdbsim_ops): Likewise.
2514 * remote-st.c (st2000_ops): Likewise.
2515 * v850ice.c (v850ice_ops): Likewise.
2516 * target.c (cleanup_target): Likewise
2517 (update_current_target): Likewise.
2518 (setup_target_debug): Likewise
2519 (debug_to_core_file_to_sym_file): Removed.
2521 * corefile.c (core_file_command) [HPUXHPPA]: Removed code that
2522 sets symbol file from information obtained from the core file.
2523 * corelow.c (core_file_to_sym_file): Removed.
2528 Fixed Insight on Solaris. It was not possible to debug a process
2529 because of EINTR "errors".
2530 * procfs.c: (procfs_wait): if proc_wait_for_stop() fails
2531 with EINTR, retry the call.
2535 * solib-aix5.c (enum maptype): Delete.
2536 (struct lm_info): Add new member ``nmappings''. Make ``mapping''
2537 member a pointer instead of a statically sized array.
2538 (build_so_list_from_mapfile): Dynamically allocate ``mapping''
2540 (aix5_relocate_main_executable, aix5_relocate_section_addresses,
2541 aix5_find_global_pointer): Search for correct mapping to use
2542 based on file offset instead of knowledge of whether the section
2543 is read-only or read/write.
2544 (aix5_find_gate_addresses): Use the first mapping instead of
2545 the (now defunct) MT_READONLY mapping.
2549 * xcoffread.c (scan_xcoff_symtab): Ignore symbols beginning with
2554 * config/i386/fbsd.mh (NATDEPFILES): Add i386-nat.o.
2558 Obsolete i[3456]86-*-sunos* (aka Sun386) host and target.
2559 * config/i386/sun386.mh: Obsolete.
2560 * config/i386/sun386.mt: Obsolete.
2561 * config/i386/xm-sun386.h: Obsolete.
2562 * config/i386/tm-sun386.h: Obsolete.
2563 * config/i386/nm-sun386.h: Obsolete.
2564 * Makefile.in (ALLDEPFILES): Delete sun386-nat.c.
2565 (sun386-nat.o): Target is obsolete.
2566 * sun386-nat.c: Obsolete.
2567 * configure.tgt (i[3456]86-*-sunos*): Obsolete.
2568 * configure.host (i[3456]86-*-sunos*): Obsolete.
2574 * maint.c: Fix typo in comment.
2578 * MAINTAINERS: Swap with Syd Polk as a gdbtk maintainer.
2582 * fork-child.c (fork_inferior, clone_and_follow_inferior):
2583 Document fact that apparent call to vfork() might actually be
2584 a call to fork() instead.
2585 * ser-pipe.c (pipe_open): Likewise.
2589 * printcmd.c (print_frame_args): Use a cleanup to invoke
2590 ui_out_list_end() so that the list count nesting flag will
2591 be decremented properly when an error occurs.
2592 * stack.c (print_frame): Likewise.
2596 * dcache.c (dcache_write_line): Fixed bugs where cache line was
2597 not written to target correctly.
2599 * gdbserver/low-hppabsd.c (read_inferior_memory): Add explicit
2601 * gdbserver/low-nbsd.c: Likewise.
2602 * gdbserver/low-sparc.c: Likewise.
2603 * gdbserver/low-sun3.c: Likewise.
2607 * config/rs6000/nm-rs6000.h (PTRACE_ATTACH): Don't define.
2608 (PTRACE_DETACH): Don't define.
2612 * arch-utils.c (default_prepare_to_proceed)
2613 (generic_prepare_to_proceed): Added new functions.
2614 * arch-utils.h: New function declarations for
2615 default_prepare_to_proceed() and generic_prepare_to_proceed().
2616 * gdbarch.sh: Added PREPARE_TO_PROCEED.
2617 * gdbarch.c: Regenerated.
2618 * gdbarch.h: Regenerated.
2619 * inferior.h: Added get_last_target_status() declaration.
2620 * infrun.c (get_last_target_status): Added new function.
2621 (handle_inferior_event): Saves last pid and waitstatus, which will
2622 get returned by get_last_target_status().
2624 * hppa-tdep.c (prepare_to_proceed): Added comment stating that
2625 prepare_to_proceed() is potentially redundant since
2626 default_prepare_to_proceed() has been added.
2627 * linux-thread.c (prepare_to_proceed): Ditto.
2628 * lin-lwp.c (prepare_to_proceed): Ditto.
2629 * m3-nat.c (prepare_to_proceed): Ditto.
2633 Obsolete powerpcle-*-cygwin* and powerpcle-*-solaris* platforms
2634 and powerpc-*-netware* target.
2635 * configure.host (powerpcle-*-cygwin*, powerpcle-*-solaris*):
2637 * configure.tgt (powerpc-*-netware*, powerpcle-*-cygwin*)
2638 (powerpcle-*-solaris*): Obsolete.
2639 * config/powerpc/tm-cygwin.h: Obsolete.
2640 * config/powerpc/cygwin.mt: Obsolete.
2641 * config/powerpc/xm-cygwin.h: Obsolete.
2642 * config/powerpc/cygwin.mh: Obsolete.
2643 * config/powerpc/nm-solaris.h: Obsolete.
2644 * config/powerpc/xm-solaris.h: Obsolete.
2645 * config/powerpc/tm-solaris.h: Obsolete.
2646 * config/powerpc/solaris.mt: Obsolete.
2647 * config/powerpc/tm-ppc-nw.h: Obsolete.
2648 * config/powerpc/ppc-nw.mt: Obsolete.
2654 * buildsym.c (record_line): Turn off unused addr bits.
2659 * inferior.h: Fix declarations of get_inferior_args and
2660 set_inferior_args, which were missing the trailing 's'.
2664 * monitor.c (monitor_supply_register): Only report an error if we
2665 don't get a valid value.
2669 * README: Don't mention gdba.el.
2674 * top.c (init_main): set prompt if annotation_level>1,
2675 this is necessary when annotation_level is set to 2 via
2676 --annotate=2 command line option.
2680 Obsolete a29k-*-* host and a29k-*-sym1* and a29k-*-kern* targets.
2681 * configure.tgt (a29k-*-sym1*, a29k-*-kern*): Obsolete.
2682 * configure.host (a29k-*-*): Obsolete.
2683 * Makefile.in (ALLDEPFILES): Remove ultra3-nat.c and
2685 (ultra3-nat.o, ultra3-xdep.o): Obsolete.
2686 * config/a29k/tm-ultra3.h: Obsolete.
2687 * config/a29k/ultra3.mt: Obsolete.
2688 * config/a29k/ultra3.mh: Obsolete.
2689 * config/a29k/nm-ultra3.h: Obsolete.
2690 * config/a29k/xm-ultra3.h: Obsolete.
2691 * ultra3-xdep.c: Obsolete.
2692 * ultra3-nat.c: Obsolete.
2693 * config/a29k/a29k-kern.mt: Obsolete.
2699 * main.c: Remove windows.h use.
2700 (gdbtk_test): Use PATH_MAX for home var calculation.
2701 * remote-e7000.c (e7000_parse_device): Accomodate Cygwin as well as
2702 Win32 in colon test.
2703 * ser-tcp.c: Use modern __CYGWIN__ conditional.
2704 * source.c (mod_path): Add __CYGWIN__ conditional to WIN32 test.
2706 * symfile.c (symfile_bfd_open): Ditto.
2710 * main.c (captured_main): For GDBtk, don't use tui_fileopen().
2711 Handle all stream setup in gdbtk_init
2715 * i386-tdep.c (i386_extract_return_value): Don't return the return
2716 value of a void function.
2717 (i386_store_return_value): Likewise.
2721 Obsolete w65-*-* target.
2722 * configure.tgt (w65-*-*): Obsolete.
2723 * config/w65/w65.mt: Obsolete.
2724 * config/w65/tm-w65.h: Obsolete.
2725 * w65-tdep.c: Obsolete.
2726 * NEWS: Update. Fix TiC80 description.
2731 Obsolete tic80-*-* target.
2732 * configure.tgt (tic80-*-*): Obsolete.
2733 * config/tic80/tic80.mt: Obsolete.
2734 * config/tic80/tm-tic80.h: Obsolete.
2735 * tic80-tdep.c: Obsolete.
2741 * remote-mips.c (S_IROTH): Moved definition from here.
2742 * gdb_stat.h (S_IROTH): to here.
2744 * remote.c (remote_protocol_e, remote_protocol_E): Define.
2745 (set_remote_protocol_e_packet_cmd)
2746 (set_remote_protocol_E_packet_cmd)
2747 (show_remote_protocol_e_packet_command)
2748 (show_remote_protocol_E_packet_command): New functions.
2749 (init_all_packet_configs): Initialize remote_protocol_e and
2751 (remote_resume, remote_async_resume): Support e/E command
2753 (show_remote_cmd): Show state of remote_protocol_e and
2755 (_initialize_remote): Add "set remote step-over-range-packet"
2756 and "set remote step-over-range-w-signal-packet" to CLI.
2760 Obsolete ns32k-*-mach3*, ns32k-umax-*, ns32k-utek-sysv* and
2762 * Makefile.in (ALLDEPFILES): Delete umax-xdep.c and ns32km3-nat.c.
2763 (umax-xdep.o, ns32km3-nat.o): Obsolete.
2764 * configure.tgt (ns32k-*-mach3*, ns32k-utek-sysv*, ns32k-utek-*):
2766 * configure.host (ns32k-*-mach3*, ns32k-umax-*, ns32k-utek-sysv*):
2768 * config/ns32k/merlin.mh: Obsolete.
2769 * config/ns32k/merlin.mt: Obsolete.
2770 * config/ns32k/xm-merlin.h: Obsolete.
2771 * config/ns32k/tm-merlin.h: Obsolete.
2772 * config/ns32k/nm-umax.h: Obsolete.
2773 * config/ns32k/umax.mh: Obsolete.
2774 * config/ns32k/umax.mt: Obsolete.
2775 * config/ns32k/xm-umax.h: Obsolete.
2776 * umax-xdep.c: Obsolete.
2777 * config/ns32k/ns32km3.mh: Obsolete.
2778 * config/ns32k/ns32km3.mt: Obsolete.
2779 * config/ns32k/tm-ns32km3.h: Obsolete.
2780 * config/ns32k/xm-ns32km3.h: Obsolete.
2781 * ns32km3-nat.c: Obsolete.
2782 * ns32k-tdep.c (merlin_skip_prologue): Obsolete.
2783 (merlin_frame_num_args): Ditto.
2789 * config/djgpp/fnchange.lst: Tweak due to
2790 expect/example/chesslib.c.
2794 * m88k-tdep.c (examine_prologue): Change type of ``insn'' from
2795 unsigned int to unsigned long. Also, fix format string.
2796 (pop_frame): Fix PC_IN_CALL_DUMMY() call so that it doesn't
2797 use an undeclared variable. Also, delete declaration and
2798 initialization of ``fp'' because it is otherwise unused.
2799 * remote-bug.c (sleep): Delete declaration.
2800 (bug_store_register, bug_write_memory, bug_read_memory)
2801 (bug_insert_breakpoint, bug_remove_breakpoint): Fix sprintf()
2802 format statements and cast certain sprintf() arguments to
2804 (bug_load): Likewise for call to printf_filtered().
2805 * config/m88k/tm-m88k.h (FIX_CALL_DUMMY): Eliminate
2806 assignment to ``pc''. The necessary assignment is done in
2807 hand_function_call() after the invocation of FIX_CALL_DUMMY().
2811 * symtab.c (completion_list_add_name): Remove duplicate string checks,
2812 readline already does this, and it's much faster at it, too.
2816 * go32-nat.c: Minor tweaks, to pacify the ari script.
2820 * i386-tdep.c (i386_extract_struct_value_address): New function.
2821 * config/i386/tm-i386.h (EXTRACT_STRUCT_VALUE_ADDRESS): Redefine
2822 in terms of i386_extract_struct_value_address.
2823 (i386_extract_struct_value_address): New prototype.
2825 * i386-linux-nat.c (i386_linux_dr_get): Change type of return
2826 value to `unsigned long'. Change type of `value' to `unsigned
2828 (i386_linux_dr_set): Change type of second argument to `unsigned
2830 (i386_linux_dr_set_control): Change type of first argument to
2832 (i386_linux_dr_get_status): Change type of return value to
2834 * config/i386/nm-linux.h (i386_linux_dr_set_control,
2835 i386_linux_dr_get_status): Adjust prototypes accordingly.
2839 * ia64-linux-nat.c (ia64_linux_stopped_by_watchpoint): Change
2840 TRAP_HWBKPT constant to match that in the kernel headers for
2845 * i386bsd-nat.c: Include "gdb_assert.h".
2846 [HAVE_PT_GETDBREGS] (DBREG_DRX): Define if not
2848 [HAVE_PT_GETDBREGS] (i386bsd_dr_set, i386bsd_dr_set_control,
2849 i386bsd_dr_set_addr, i386bsd_dr_reset_addr,
2850 i386bsd_dr_get_status): New functions.
2851 * config/i386/nm-fbsd.h [HAVE_PT_GETDBREGS]
2852 (I386_USE_GENERIC_WATCHPOINTS): Define.
2853 Include "i386/nm-i386.h".
2854 (I386_DR_LOW_SET_CONTROL, I386_DR_LOW_SET_ADDR,
2855 I386_DR_LOW_RESET_ADDR, I386_DR_LOW_GET_STATUS): New macros.
2856 (i386bsd_dr_set_control, i386bsd_dr_set_addr,
2857 i386bsd_dr_reset_addr, i386bsd_dr_get_status): New prototypes.
2858 * acconfig.h (HAVE_PT_GETDBREGS): New configure macro.
2859 * configure.in: Cleanup a few comments. Check for PT_GETDBREGS
2861 * config.in, configure: Regenerate.
2863 * i386-nat.c (i386_insert_aligned_watchpoint): Set address
2864 register before enabling it by setting the control register.
2865 (i386_remove_aligned_watchpoint): Reset address register after
2866 disabling it by setting the control register.
2868 * i386-tdep.c (i386_extract_return_value): If the type of the
2869 return value is TYPE_STRUCT and the number of fields is one, call
2870 ourselves with TYPE set tp the type of the first field.
2871 (i386_store_return_value): Likewise.
2872 This fixes a problem with returning structs consisting of a single
2873 `float' or `double' on *BSD.
2877 * lin-lwp.c (lin_lwp_resume): Don't mark LWP as not stopped until
2878 we're absolutely sure we're going to resume it.
2880 * thread-db.c (check_event): Don't report an error if we encounter
2881 a thread creation event for a thread that's already in the thread
2882 list, since that may legitemately happen. Instead only call
2883 attach_thread if it's not already in the thread list.
2887 * config/pa/xm-hppah.h (malloc): Really delete declaration
2888 (MALLOC_INCOMPATIBLE): Really delete macro.
2889 * cli/cli-cmds.c (apropos_command): Use xcalloc.
2893 * configure.in (build_warnings): Add -Wuninitialized.
2894 * configure: Regenerate.
2896 * v850-tdep.c (v850_scan_prologue): Initialize ``insn2''.
2897 * sparc-tdep.c (sparc64_push_arguments): Add default case to
2899 * sh-tdep.c (sh_do_fp_register): Replace ``?:'' printf format
2900 expression with if statement.
2901 * mn10200-tdep.c (mn10200_analyze_prologue): Initialize
2903 * mips-tdep.c (show_mipsfpu_command): Add default case to switch.
2904 (mips_dump_tdep): Fix setting of ef_mips_arch.
2905 * mcore-tdep.c (mcore_analyze_prologue): Initialize ``fp_regnum''.
2906 * dsrec.c (make_srec): Always initialize ``binbuf''.
2907 * monitor.c (monitor_read_memory_single): Do not pass an
2908 uninitialized buffer to monitor_error. Make ``i'' more local.
2912 * MAINTAINERS: Change ns32k target to ,-Werror.
2914 * ns32k-tdep.c: Include "gdbcore.h"
2915 (flip_bytes): Change first argument to void*. Add forward
2917 (sign_extend): Add declaration.
2918 (merlin_frame_num_args): Add final else clause to if-else chain.
2919 (umax_frame_num_args): Ditto.
2920 * config/ns32k/tm-umax.h (ns32k_localcount): Declare.
2921 (flip_bytes): Ditto.
2925 * i386-linux-tdep.c (FRAMELESS_SIGNAL): Moved here from
2926 config/i386/nm-linux.h (including comment).
2927 (i386_linux_frame_chain): New function implementing guts of the
2928 former FRAME_CHAIN macro, but using read_memory_unsigned_integer
2929 instead of read_memory_integer.
2930 (i386_linux_frame_saved_pc): Removed doc pointing to
2931 i386/tm-linux.h for an explanation of FRAMELESS_SIGNAL since that
2932 now lives in this file.
2933 * config/i386/tm-linux.h (FRAMELESS_SIGNAL): Moved to
2934 i386-linux-tdep.c (including comment).
2935 (FRAME_CHAIN): Redefined in terms of i386_linux_frame_chain.
2936 (i386_linux_frame_chain): New prototype.
2938 * gdbserver/low-linux.c [I386_GNULINUX_TARGET]: Cleanup code and
2940 (NUM_FREGS): Redefine to 0.
2941 (NUM_REGS): Redefine as NUM_GREGS.
2942 (i386_register_byte, i386_register_raw_size): Update from
2943 i386-tdep.c. Add comment about their origin.
2944 (regmap, register_u_addr): Take these from i386-linux-nat.c.
2945 (i386_register_u_addr): Removed.
2947 * i386-linux-nat.c (i386_linux_dr_get): Return 0 if ptrace call
2948 fails instead of calling perror_with_name. This should fix
2949 debugging remote i386 targets with a native Linux/x86 GDB. Add
2950 FIXME for this hack.
2954 * arch-utils.c (#include "gdbthread.h"): Removed.
2955 (#include "symfile.h"): Removed.
2956 (XMALLOC): Removed unused macro.
2957 * breakpoint.c (tbreak_command): Removed local declaration.
2958 (awatch_command, do_enable_breakpoint, set_breakpoint_count):
2959 Remove duplicate declarations.
2960 (bpstat_should_step, bpstat_have_active_hw_watchpoints)
2961 (remove_solib_event_breakpoints): Fix indentation botch.
2962 * c-typeprint.c (#include "command.h"): Removed.
2963 (#include "gdbcmd.h"): Removed.
2964 * ch-exp.c (ch_terminal_match_float_literal, parse_expr)
2965 (parse_primval, parse_untyped_expr, parse_opt_untyped_expr):
2966 Removed duplicate declarations.
2967 * ch-typeprint.c (#include "command.h"): Removed.
2968 (#include "gdbcmd.h"): Removed.
2969 * corefile.c (#include "frame.h"): Removed
2970 (#include "symfile.h"): Removed.
2971 (#include "language.h"): Removed.
2972 * dbxread.c (#include "command.h"): Removed.
2973 * environ.c (#include "gdbcore.h"): Removed.
2974 * event-loop.c (#include "top.h"): Removed.
2975 * f-typeprint.c (#include "command.h"): Removed.
2976 (#include "gdbcmd.h"): Removed.
2977 (#include "language.h"): Removed.
2978 (#include "typeprint.h"): Removed.
2979 (#include "frame.h"): Removed.
2980 * gdbtypes.h (print_type_scalar): Removed declaration.
2981 * infcmd.c (#include "completer.h"): Removed.
2982 * language.c (#include "frame.h"): Removed.
2983 * m2-typeprint.c (#include "command.h"): Removed.
2984 (#include "gdbcmd.h"): Removed.
2985 (#include "language.h"): Removed.
2986 * m2-valprint.c (#include "valprint.h"): Removed.
2987 * p-typeprint.c (#include "command.h"): Removed.
2988 (#include "gdbcmd.h"): Removed.
2989 * p-valprint.c (#include "typeprint.h"): Removed.
2990 * parse.c (#include "linespec.h"): Removed.
2991 * regcache.c (#include "frame.h"): Removed.
2992 * remote.c (#include "frame.h"): Removed.
2993 (getpkt_sane): Make static.
2994 * source.c (#include "completer.h"): Removed.
2995 * stack.c (#include "symfile.h"): Removed.
2996 (#include "objfiles.h"): Removed.
2997 * symfile.c (#include "completer.h"): Removed.
2998 * tracepoint.c (#include "completer.h"): Removed.
2999 * values.c (#include "frame.h"): Removed.
3000 * varobj.c (#include "valprint.h"): Removed.
3001 * wrapper.c (#include "frame.h"): Removed.
3003 * memattr.c (create_mem_region): Removed unused variable.
3004 * remote-nrom.c: Removed spurious semicolon after init_nrom_ops.
3008 * remote-rdp.c (rdp_set_command_line): Add missing double quote.
3012 * solib-aix5.c (build_so_lib_from_mapfile): Use xfree() instead
3017 * TODO (Cleanups): Remove the item about converting docs to GFDL.
3021 * ia64-tdep.c (slotN_contents, replace_slotN_contents): Change
3022 type of ``bundle'' from unsigned char * to char *.
3023 (ia64_get_saved_register): Use alloca() to allocate register
3026 * solib-aix5.c (build_so_lib_from_mapfile): Fix xasprintf() usage.
3030 * proc-utils.h (procfs_ctl_t): New typedef.
3031 * proc-api.c (write_with_trace): Change type of ``opcode'' from
3032 long to procfs_ctl_t. Don't assume that the target has defined
3033 BREAKPOINT. Handle case in which PCRESET is the same as PCUNSET.
3034 * proc-events.c (sys/syscall.h, sys/fault.h): Include conditionally.
3035 * procfs.c (sys/fault.h, sys/syscall.h): Include conditionally.
3036 (gdb_sigset_t, gdb_sigaction_t, gdb_siginfo_t, gdb_premptysysset)
3037 (gdb_praddsysset, gdb_prdelsysset, gdb_pr_issyssetmember):
3038 Conditionally define as appropriate for AIX/non-AIX systems. Use
3039 these defines/typedefs as appropriate elsewhere in file.
3040 (struct procinfo): Change type of saved_sigset and saved_sighold
3041 from sigset_t to gdb_sigset_t. Make saved_exitset and
3042 saved_entryset pointer variables. Add two new fields, num_syscalls
3044 (DYNAMIC_SYSCALLS): Define when HAVE_PRSYSENT_T is defined.
3045 (sysset_t_size, sysset_t_alloc): New functions.
3046 (load_syscalls, free_syscalls, find_syscall): New functions for
3047 platforms which define DYNAMIC_SYSCALLS.
3048 (create_procinfo): Call load_syscalls.
3049 (destroy_one_procinfo): Call free_syscalls.
3050 (GDBRESET): Don't define twice.
3051 (proc_modify_flag): Change type of operation code array `arg'
3052 from long to procfs_ctl_t.
3053 (proc_stop_process, proc_wait_for_stop, proc_run_process)
3054 (proc_set_traced_signals, proc_set_traced_faults)
3055 (proc_set_traced_sysentry, proc_set_traced_sysexit)
3056 (proc_set_held_signals, proc_clear_current_fault)
3057 (proc_set_current_signal, proc_clear_current_signal, proc_set_gregs)
3058 (proc_set_fpregs, proc_kill, proc_set_watchpoint): Likewise for `cmd'.
3059 (proc_set_traced_sysentry): Dynamically allocate variable sized
3060 struct gdb_proc_ctl_pcsentry. Also, free it at function exit.
3061 (proc_set_traced_sysexit): Dynamically allocate variable
3062 sized struct gdb_proc_ctl_pcsexit. Also, free it at
3064 (proc_get_traced_sysentry, proc_get_traced_sysexit): Add new code
3065 for reading the sysset_t struct on AIX5.
3066 (procfs_debug_inferior): Don't assume that SYS_exit will be
3067 defined. Add new code for finding certain syscalls on AIX5.
3068 (syscall_is_lwp_exit, syscall_is_exit, syscall_is_exec)
3069 (syscall_is_lwp_create): New functions.
3070 (procfs_wait): Restructured code which checks for certain
3071 system calls to use the new syscall_is_... functions.
3072 (procfs_notice_signals): Account for the fact that saved_entryset
3073 and saved_exitset in struct procinfo are now pointers.
3077 * symtab.c (find_pc_sect_line): Revise method used for finding
3082 * i386-linux-tdep.c (i386_linux_sigtramp_saved_pc,
3083 i386_linux_sigtramp_saved_sp): Make static.
3084 (i386_linux_frame_saved_pc): New function based on the old
3085 FRAME_SAVED_PC macro, but use read_memory_unsigned_integer instead
3086 of read_memory_integer.
3087 * config/i386/tm-linux.h (sigtramp_saved_pc): Remove definition.
3088 (i386_linux_sigtramp_saved_pc): Remove prototype.
3089 (FRAME_SAVED_PC): Redefine in terms of i386_linux_frame_saved_pc.
3090 (i386_linux_frame_saved_pc): New prototype.
3094 * MAINTAINERS: Document m88k as a ``Known problem in 5.1''.
3095 * TODO (GDB 5.1 - Cleanups): Update.
3099 * fork-child.c (clone_and_follow_inferior): Delete #ifdef
3104 * config/i386/tm-symmetry.h (PUSH_ARGUMENTS): #undef.
3106 * i386-tdep.c (i386_push_arguments, i386_store_struct_return): New
3108 * config/i386/tm-i386.h (PUSH_ARGUMENTS): New macro.
3109 (STORE_STRUCT_RETURN): Redefine in terms of
3110 i386_store_struct_return.
3111 (i386_push_arguments, i386_store_struct_return): New prototypes.
3112 * config/i386/tm-i386v.h (STORE_STRUCT_RETURN): Remove. It's
3113 definition was identical to the definition in "i386/tm-i386.h" so
3114 the new definition should suffice too.
3118 * event-loop.c (toplevel) [!HAVE_POLL] [NO_FD_SET]: Remove unused
3119 definitions for SELECT, NBBY, FD_SETSIZE, NFDBITS, and MASK_SIZE.
3121 * config/djgpp/djconfig.sh: Add copyright notice.
3123 * ser-go32.c (rawclock): Remove prototype; include time.h instead.
3124 (ISR, dos_hookirq, isr_t): Convert K&R definition to ANSI C.
3125 (top level) <string.h>: Include gdb_string.h instead.
3126 (dos_noop, dos_raw, dos_noflush_set_tty_state)
3127 (dos_print_tty_state, dos_info): Remove ATTRIBUTE_UNUSED.
3129 * go32-nat.c (go32_create_inferior): Move the declaration of
3130 `environ' to here from the top level.
3131 (top level) <_initialize_go32_nat>: Remove redundant prototype.
3132 <gdb_string.h>: Include it instead of string.h.
3133 (store_register): Call register_buffer instead of accessing
3134 registers[] directly.
3135 (redir_cmdline_delete, redir_cmdline_parse, redir_to_debugger)
3136 (redir_to_debugger, redir_debug_init) [__DJGPP_MINOR__ < 3]: Put
3137 the function names at the start of the line.
3138 (go32_set_dr): Throw internal_error if the argument is not a valid
3139 debug register number.
3140 (go32_open, go32_close, go32_attach, go32_detach, go32_resume)
3141 (go32_wait, go32_xfer_memory, go32_files_info)
3142 (go32_terminal_info): Remove ATTRIBUTE_UNUSED.
3146 * mips-tdep.c (mips_gdbarch_init): Tweak indentation.
3152 * coffread.c: Include "gdb_assert.h".
3153 (coff_symtab_read): Cast the integer s_sclass to a long before
3154 casting it to a pointer.
3160 * coffread.c (coff_symtab_read): Initialize
3161 ``fcn_first_line_addr''. Check that the ``.bf'' always preceeds
3163 * dbxread.c (find_text_range): Initialize ``start'' and ``end''.
3167 * config/sparc/tm-sp64.h (GDB_MULTI_ARCH): Down grade to
3168 GDB_MULTI_ARCH_PARTIAL from two. SOFTWARE_SINGLE_STEP is not
3171 * gdbarch.sh (SOFTWARE_SINGLE_STEP): Add.
3172 * gdbarch.h, gdbarch.c: Re-generate.
3174 * target.h (SOFTWARE_SINGLE_STEP_P)
3175 (SOFTWARE_SINGLE_STEP): Delete macro definitions.
3179 * gdbarch.sh (gdbarch_register_read, gdbarch_register_write): Add.
3180 * gdbarch.h, gdbarch.c: Regenerate.
3182 * regcache.h (regcache_read, regcache_write): Declare.
3183 (registers, register_valid, register_buffer): Add note that these
3184 interfaces are deprecated.
3186 * regcache.c: Include "gdb_assert.h".
3187 (legacy_write_register_gen): Rename write_register_gen.
3188 (legacy_read_register_gen): Rename read_register_gen.
3189 (regcache_read, regcache_write): New function.
3190 (read_register_gen, write_register_gen): New function.
3191 (write_register): Simplify. Use write_register_gen.
3192 (read_register): Ditto using read_register_gen.
3193 (read_signed_register): Ditto.
3194 (read_register_bytes): Ditto!!!!
3195 (supply_register): Add note that CLEANUP_REGISTER_VALUE is being
3196 replaced by gdbarch_register_read.
3198 * TODO (GDB 5.2 - Cleanups): Add list of gdbarch methods to
3203 Fix from Dan Berlin:
3205 * stabsread.c (read_cpp_abbrev): Properly construct the names of
3206 virtual function table pointer fields.
3210 * defs.h (xfree, mcalloc, mmalloc, mrealloc, mfree, xmmalloc,
3211 xmrealloc): Move existing declarations to the one place and
3212 re-order to be consistent.
3213 (xmcalloc, xmfree): Declare.
3214 (xmmalloc, xmrealoc): Assume ISO-C - use size_t and void* in
3217 * utils.c (size_t): Delete #ifdef defining size_t.
3218 (mmalloc, mrealloc, mcalloc, mfree): Re-order.
3219 (mmalloc, mrealloc, mcalloc): Document as only calls in GDB
3220 corresponding malloc, realloc, calloc.
3221 (mfree): Call free directly.
3222 (xmmalloc, xmrealloc): Clean up. Assume ISO-C.
3223 (xmcalloc, xmfree): New functions. Copy old xcalloc and xfree
3224 function bodies to here.
3225 (xcalloc, xfree): Call xmcalloc and xmfree respectfully.
3229 * fork-child.c (fork_inferior): Make ``argv'', ``exec_file'' and
3230 ``shell_file'' static locals.
3232 * jv-lang.c (java_link_class_type): Initialize ``field'' and
3235 * jv-valprint.c (java_value_print): Initialize ``next_element''.
3239 * config/i386/nm-i386.h: Fix formatting and change reference to
3240 i386-tdep.c to i386-nat.c.
3244 * configure.in: Corrected spelling errors.
3245 * configure: Regenerated.
3249 * TODO (GDB 5.1 - Cleanups): Add more targets to obsolete.
3253 * Makefile.in (NTSSTART): Delete.
3255 (kdb): Delete target.
3256 * kdb-start.c, stuff.c: Mark as obsolete.
3261 * config/pa/xm-hppah.h (HPPA_COMPILER_BUG): Delete. GDB only
3262 compiles using an ISO-C compiler.
3263 (MALLOC_INCOMPATIBLE): Ditto.
3264 * linespec.c (decode_line_1): Delete hack to work around
3269 * exec.c (xfer_memory): Always initialize section.
3270 * infrun.c (normal_stop): Always initialize source_flag.
3274 * TODO (Remote Protocol Support): Review. Add notes about ``!'',
3275 non-use of a continue address and typical use of ``q'' packet.
3279 Make DJGPP use the new unified support for hardware
3280 breakpoints and watchpoints on x86 targets:
3282 * config/i386/nm-go32.h <top level>: Don't include nm-i386v.h,
3283 include nm-i386.h instead.
3284 (TARGET_HAS_HARDWARE_WATCHPOINTS, HAVE_CONTINUABLE_WATCHPOINT)
3285 (TARGET_CAN_USE_HARDWARE_WATCHPOINT, STOPPED_BY_WATCHPOINT)
3286 (TARGET_REGION_OK_FOR_HW_WATCHPOINT, DECR_PC_AFTER_HW_BREAK)
3287 (target_stopped_data_address, target_insert_watchpoint)
3288 (target_remove_watchpoint, target_insert_hw_breakpoint)
3289 (target_remove_hw_breakpoint): Don't define.
3290 (I386_USE_GENERIC_WATCHPOINTS, I386_DR_LOW_SET_CONTROL)
3291 (I386_DR_LOW_SET_ADDR, I386_DR_LOW_RESET_ADDR)
3292 (I386_DR_LOW_GET_STATUS): Define to call appropriate go32_*
3293 functions from go32-nat.c.
3295 * config/i386/go32.mh (NATDEPFILES): Add i386-nat.o.
3297 * go32-nat.c <top level>: Remove prototypes for watchpoint-
3298 related functions. Remove definitions of watchpoint-related
3300 (go32_mourn_inferior): Call i386_cleanup_dregs instead of the
3301 private cleanup_dregs function.
3302 (cleanup_dregs, go32_insert_watchpoint)
3303 (go32_insert_aligned_watchpoint, go32_handle_nonaligned_watchpoint)
3304 (go32_remove_watchpoint, go32_remove_aligned_watchpoint)
3305 (go32_region_ok_for_watchpoint, go32_stopped_by_watchpoint)
3306 (go32_remove_hw_breakpoint, go32_insert_hw_breakpoint): Remove.
3307 (go32_set_dr, go32_set_dr7, go32_get_dr6): New functions.
3311 * ia64-tdep.c (fetch_instruction): Warn about slot numbers greater
3312 than two instead of generating an error.
3316 * cp-valprint.c: Reformat to bring into line with GNU coding
3321 Make Linux use the new unified support for hardware breakpoints
3322 and watchpoints on x86 targets.
3323 * i386-linux-nat.c: Doc fixes. Include "gdb_assert.h".
3324 [HAVE_SYS_DEBUGREG_H]: Include <sys/debugreg.h>.
3325 (DR_FIRSTADDR, DR_LASTADDR, DR_STATUS, DR_CONTROL): Define to
3326 appropriate value if not already defined.
3327 (register_u_addr): New function.
3328 (kernel_u_size): New function.
3329 (i386_linux_dr_get, i386_linux_dr_set): New functions.
3330 (i386_linux_dr_set_control, i386_linux_dr_set_addr,
3331 i386_linux_reset_addr, i386_linux_dr_get_status): New functions.
3332 * config/i386/nm-linux.h: Don't include "nm-i386v.h".
3333 (I386_USE_GENERIC_WATCHPOINTS): Define and include "nm-i386.h".
3334 (TARGET_HAS_HARDWARE_WATCHPOINTS,
3335 TARGET_CAN_USE_HARDWARE_WATCHPOINTS, HAVE_CONTINUABLE_WATCHPOINT,
3336 STOPPED_BY_WATCHPOINT, target_insert_watchpoint,
3337 target_remove_watchpoint): Remove macros.
3338 (i386_stopped_by_watchpoint, i386_insert_watchpoint,
3339 i386_remove_watchpoint): Remove prototypes.
3340 (register_u_addr): New prototype.
3341 (REGISTER_U_ADDR): Define in terms of register_u_addr.
3342 (i386_linux_dr_set_control, i386_linux_dr_set_addr,
3343 i386_linux_reset_addr, i386_linux_dr_get_status): New prototypes.
3344 (I386_DR_LOW_SET_CONTROL, I386_DR_LOW_SET_ADDR,
3345 I386_DR_LOW_RESET_ADDR, I386_DR_LOW_GET_STATUS): New macros.
3346 * config/i386/linux.mh (NATDEPFILES): Replace i386v-nat.o with
3351 Fix from Dan Berlin:
3353 * linespec.c (find_methods): Whitespace differences aren't
3354 significant in *un*mangled method names. Use strcmp_iw to compare
3359 * gdbarch.sh: Allow a non- multi-arch target to override a
3361 * gdbarch.h: Regenerate.
3365 * gdbarch.sh: Avoid use of ``!''.
3369 * target.h (enum target_signal): Move definition from here.
3370 * defs.h (enum target_signal): To here.
3372 * config/arc/tm-arc.h (arc_software_single_step): Change type of
3373 first parameter to enum target_signal.
3374 * config/rs6000/tm-rs6000.h (rs6000_software_single_step): Ditto.
3375 * config/sparc/tm-sparc.h (sparc_software_single_step): Ditto.
3376 * rs6000-tdep.c (rs6000_software_single_step): Update.
3380 * frame.h (SIZEOF_FRAME_SAVED_REGS): Report an error if macro
3384 * stabsread.c (define_symbol): A parameter ('R'), a local ('r'),
3385 or a reference ('a') can be in a pseudo register.
3386 * infcmd.c (do_registers_info): Must take into account the pseudo
3387 registers to print their value.
3388 (registers_info): Likewise.
3389 * stack.c (frame_info): Likewise.
3390 * frame.h (SIZEOF_FRAME_SAVED_REGS): Save the pseudo registers.
3394 Unified support for hardware breakpoints and watchpoints on
3397 * config/i386/nm-i386.h: New file.
3399 * config/i386/nm-i386.h: (i386_cleanup_dregs)
3400 (i386_insert_watchpoint, i386_remove_watchpoint)
3401 (i386_region_ok_for_watchpoint, i386_stopped_by_hwbp)
3402 (i386_stopped_data_address, i386_insert_hw_breakpoint)
3403 (i386_remove_hw_breakpoint): Declare prototypes.
3404 [I386_USE_GENERIC_WATCHPOINTS] (TARGET_CAN_USE_HARDWARE_WATCHPOINT):
3405 Define if not already defined.
3406 (TARGET_REGION_OK_FOR_HW_WATCHPOINT, HAVE_CONTINUABLE_WATCHPOINT)
3407 (STOPPED_BY_WATCHPOINT, target_stopped_data_address)
3408 (target_insert_watchpoint, target_remove_watchpoint)
3409 (target_insert_hw_breakpoint, target_remove_hw_breakpoint): Define
3410 to call the appropriate i386_* functions.
3412 * i386-nat.c: New file.
3414 * i386-nat.c (I386_DR_CONTROL_MASK, I386_DR_LOCAL_ENABLE)
3415 (I386_DR_GLOBAL_ENABLE, I386_DR_DISABLE, I386_DR_SET_RW_LEN)
3416 (I386_DR_GET_RW_LEN, I386_DR_WATCH_HIT): New macros.
3417 (dr_mirror, dr_status_mirror, dr_control_mirror, dr_ref_count)
3418 (maint_show_dr): New variables.
3419 (i386_cleanup_dregs, i386_show_dr, i386_length_and_rw_bits)
3420 (i386_insert_aligned_watchpoint, i386_remove_aligned_watchpoint)
3421 (i386_handle_nonaligned_watchpoint, i386_insert_watchpoint)
3422 (i386_remove_watchpoint, i386_region_ok_for_watchpoint)
3423 (i386_stopped_data_address, i386_stopped_by_hwbp)
3424 (i386_insert_hw_breakpoint, i386_remove_hw_breakpoint): New
3426 (_initialize_i386_nat): New function.
3427 [I386_USE_GENERIC_WATCHPOINTS]: Add new maint command
3428 `show-debug-regs', sets maint_show_dr to non-zero value and
3429 activates debugging print-outs in functions which insert, remove,
3430 and test watchpoints and hardware breakpoints.
3432 * Makefile.in (i386-nat.o): New target.
3433 (ALLDEPFILES): Add i386-nat.o.
3437 * i386-tdep.c: Add back _initialize_i386_tdep prototype with
3438 appropriate comment.
3442 * config/alpha/alpha-linux.mh (NATDEPFILES): Use proc-service.o,
3443 thread-db.o, and lin-lwp.o for thread support instead of
3444 linux-thread.o and lin-thread.o.
3445 * config/alpha/nm-linux.h (PREPARE_TO_PROCEED, GET_THREAD_SIGNALS)
3446 (ATTACH_LWP): Define to use the following lin-lwp.c functions...
3447 (lin_lwp_prepare_to_proceed, lin_thread_get_thread_signals)
3448 (lin_lwp_attach_lwp): Declare.
3452 Fix from Dan Berlin:
3454 * Makefile.in: Clean up dependencies on ../include/demangle.h.
3455 (demangle_h): New variable.
3456 (jv-typeprint.o, jv-valprint.o, linespec.o): Use it.
3460 * target.h (SOFTWARE_SINGLE_STEP_P): Add empty parameter list.
3461 * breakpoint.c (bpstat_stop_status): Update.
3462 * infrun.c (handle_inferior_event): Ditto.
3463 * mips-tdep.c (mips_dump_tdep): Ditto.
3464 * infrun.c (resume): Ditto.
3465 * infptrace.c (child_resume): Ditto.
3466 * config/mips/tm-wince.h (SOFTWARE_SINGLE_STEP_P): Ditto.
3467 * config/sh/tm-wince.h (SOFTWARE_SINGLE_STEP_P): Ditto.
3468 * config/sparc/tm-sparc.h (SOFTWARE_SINGLE_STEP_P): Ditto.
3469 * config/powerpc/tm-linux.h (SOFTWARE_SINGLE_STEP_P): Ditto.
3470 * config/arm/tm-wince.h (SOFTWARE_SINGLE_STEP_P): Ditto.
3471 * config/arc/tm-arc.h (SOFTWARE_SINGLE_STEP_P): Ditto.
3472 * config/powerpc/tm-ppc-eabi.h (SOFTWARE_SINGLE_STEP_P): Ditto.
3476 * config/powerpc/tm-linux.h (SOFTWARE_SINGLE_STEP): Replace abort
3477 with internal_error.
3481 Fix from Dan Berlin:
3483 * linespec.c (find_methods): Just call CHECK_TYPEDEF on t, rather
3484 than asking for sym_class's type; that's circuitous. Remove
3485 sym_class, since the last use of it is gone.
3489 * breakpoint.c (print_it_typical) <bp_access_watchpoint> [UI_OUT]:
3490 Correct the order of calls to ui_out_field_string and
3491 ui_out_list_begin when bs->old_val is NULL.
3495 * configure.in (AC_CHECK_HEADERS): Check for existence of nlist.h.
3496 * configure: Regenerate.
3497 * config.in: Regenerate.
3498 * solib-legacy.c (nlist.h): Include if HAVE_NLIST_H is defined.
3502 * config/i386/i386v42mp.mh (NATDEPFILES): List all files on
3503 same line to avoid problems with Unixware 7's make when building
3508 * defs.h (malloc): Move declaration from here.
3509 * utils.c (malloc): To here.
3510 * config/pa/xm-hppah.h (malloc): Delete declaration.
3512 * gnu-nat.c (make_proc): Use xmalloc instead of malloc.
3513 * hp-psymtab-read.c (hpread_call_pxdb): Ditto.
3514 (hpread_quick_traverse): Ditto.
3515 * infttrace.c (create_thread_info): Ditto.
3516 (kill_inferior): Ditto.
3517 * gnu-nat.c (make_inf): Ditto, and don't check return value.
3518 * procfs.c (proc_update_threads): Ditto.
3519 * valprint.c (print_decimal_chars): Ditto.
3520 * gdbtypes.c (cfront_mangle_name): Use xasprintf instead of
3522 * remote-rdp.c (rdp_set_command_line): Ditto.
3526 * defs.h (realloc): Move declaration from here.
3527 * utils.c (realloc): To here.
3528 * config/pa/xm-hppah.h (realloc): Delete declaration.
3529 * lin-thread.c (insert_thread): Use xrealloc instead of realloc.
3530 * symfile.c (add_filename_language): Ditto.
3531 * event-loop.c (create_file_handler): Ditto.
3535 * defs.h (free): Move declaration from here.
3536 * utils.c (free): To here.
3537 (xfree): Document as the only call to free().
3538 * config/pa/xm-hppah.h (free): Delete declaration.
3542 * config/ia64/linux.mh (NATDEPFILES): Add proc-service.o to
3547 * eval.c (evaluate_subexp): Remove #ifdef __STDC__ and ``inline''.
3548 * config/mips/xm-mips.h (offsetof): Define when !GNUC not !STDC.
3549 * cli/cli-cmds.c (init_cli_cmds): Remove #ifdef __STDC__
3553 * TODO: List known problems with TUI.
3557 * MAINTAINERS: Jimmy Guo stepped down as a maintiner (TUI,
3562 * remote.c (remote_cisco_section_offsets): Do not cast result from
3563 bfd_get_section_name.
3564 (compare_sections_command): Ditto.
3565 (remote_cisco_section_offsets): Make ``p'' a const pointer.
3566 (compare_sections_command): Ditto for ``sectname''.
3571 * valops.c (hand_function_call): Simplify computation of the
3572 address of the pushed argument.
3576 * p-exp.y (parse_number): Avoid shift overflow when ``long''.
3577 Code copied from c-exp.y.
3581 * acconfig.h (HAVE_STRUCT_LINK_MAP_WITH_L_MEMBERS)
3582 (HAVE_STRUCT_LINK_MAP_WITH_LM_MEMBERS)
3583 (HAVE_STRUCT_SO_MAP_WITH_SOM_MEMBERS): New configure macros.
3584 * configure.in (HAVE_STRUCT_LINK_MAP32): Move this test out
3585 of the Solaris procfs testing section. Instead, group with...
3586 (HAVE_STRUCT_LINK_MAP_WITH_L_MEMBERS)
3587 (HAVE_STRUCT_LINK_MAP_WITH_LM_MEMBERS)
3588 (HAVE_STRUCT_SO_MAP_WITH_SOM_MEMBERS): New <link.h> tests.
3589 * configure: Regenerate.
3590 * config.in: Regenerate.
3592 * solib-legacy.c (legacy_svr4_fetch_link_map_offsets): Use
3593 new configure macros to choose which (if any) code to
3594 compile in. Added code to explicitly handle *BSD systems;
3595 these systems were previously handled only through macro
3596 redefinition. Also, due to the way the autoconf tests are set
3597 up, this function will no longer return a non-zero value when
3598 GDB is configured as a cross debugger. I.e, cross debuggers
3599 will no longer be able to "accidentally" get the host system's
3604 * config/i386/nbsd.mh (NATDEPFILES): List all files on the same
3605 line to avoid build problem on NetBSD 1.4.
3609 * win32-nat.c (child_attach): check args for NULL before passing
3610 to strtoul. This fixes PR gdb/43.
3614 * i387-nat.h: Doc Fix.
3616 * i386-tdep.c: Fix formatting.
3617 (i386_get_frame_setup, i386_follow_jump, codestream_read,
3618 codestream_seek, codestream_fill, skip_trampoline_code,
3619 gdb_print_insn_i386, _initialize_i386_tdep): Remove redundant
3624 * config/i386/tm-linux.h (TARGET_ANALYZE_FLOATING): Remove. It's
3625 no longer used. Also remove associated FIXME.
3629 * gdbarch.sh: Add classes ``m'' and ``M'' for pure multi-arch. Do
3630 not generate macro wrappers for multi-arch functions or
3632 (class_is_info_p, class_is_predicate_p): Update.
3633 (class_is_function_p, class_is_variable_p): Ditto.
3634 (class_is_multiarch_p): New class function.
3638 * config/h8300/tm-h8300.h (FRAME_ARGS_ADDRESS): Changed to use
3639 h8300_frame_args_address from frame_args_address.
3640 (FRAME_LOCALS_ADDRESS): Changed to use h8300_frame_locals_address
3641 from frame_locals_address.
3642 (PRINT_REGISTER_HOOK): Changed to use h8300_print_register_hook
3643 from print_register_hook.
3644 (h8300_frame_args_address): Declare.
3645 (h8300_frame_find_saved_regs): Declare.
3646 (h8300_frame_locals_address): Declare.
3647 (h8300_frame_saved_pc): Declare.
3648 (h8300_pop_frame): Declare.
3649 (h8300_print_register_hook): Declare.
3650 * h8300-tdep.c (h8300_frame_find_saved_regs): Removed declaration.
3651 (h8300_frame_args_address): Renamed from frame_args_address.
3652 (h8300_frame_locals_address): Renamed from frame_locals_address.
3653 (h8300_pop_frame): Renamed from pop_frame.
3654 (h8300_print_register_hook): Renamed from print_register_hook.
3658 * solib-svr4.c (bfd_lookup_symbol): Change type of
3659 ``storage_needed'' from unsigned int to long in order to
3660 match return type of bfd_get_symtab_upper_bound() and
3661 bfd_get_dynamic_symtab_upper_bound().
3662 * solib-aix5.c (bfd_lookup_symbol): Likewise. Also, eliminate
3663 REASONABLE_LIMIT hack which had been added to work around this
3668 * solib-aix5.c (bfd_lookup_symbol, build_so_list_from_mapfile)
3669 (aix5_relocate_main_executable, aix5_clear_solib): Replace calls
3670 to free() with calls to xfree().
3671 (bfd_lookup_symbol): Eliminate use of PTR.
3672 (build_so_list_from_mapfile): Use xasprintf() instead of sprintf().
3676 * linespec.c (decode_line_1): Remove trailing quote
3677 when parsing double quotes.
3681 * uw-thread.c (read_thr_debug, read_map, read_lwp, thread_iter)
3682 (libthread_stub, libthread_init): Pass NULL for the mem_attrib
3683 argument in the to_xfer_memory calls.
3687 * MAINTAINERS: Fix typo - w65 not w64. Still doesn't build.
3688 * TODO (GDB 5.1 - Cleanups): Add status of targets being obsoleted.
3692 * wince.c (child_xfer_memory): Add attrib parameter.
3693 * symm-nat.c (child_xfer_memory): Ditto.
3694 * mac-nat.c (child_xfer_memory): Ditto.
3695 * infttrace.c (child_xfer_memory): Ditto.
3696 * procfs.c (procfs_xfer_memory): Ditto.
3697 * lin-thread.c (thread_db_xfer_memory): Ditto.
3698 * gnu-nat.c (gnu_xfer_memory): Ditto.
3702 * NEWS: Mention that Harris/CXUX m88k is obsolete.
3706 * config/mips/tm-mips.h: Include "regcache.h" for macros refering
3707 to regcache functions.
3708 * config/m68k/tm-m68k.h: Ditto.
3709 * config/i386/tm-i386v.h: Ditto.
3710 * config/mcore/tm-mcore.h: Ditto.
3711 * config/m88k/tm-m88k.h: Ditto.
3712 * config/m68k/tm-news.h: Ditto.
3713 * config/m68k/tm-linux.h: Ditto.
3714 * config/m68k/tm-delta68.h: Ditto.
3715 * config/m68k/nm-sun3.h: Ditto.
3716 * config/m32r/tm-m32r.h: Ditto.
3717 * config/i386/tm-symmetry.h: Ditto.
3718 * config/i386/tm-sun386.h: Ditto.
3719 * config/i386/tm-i386.h: Ditto.
3720 * config/i386/nm-symmetry.h: Ditto.
3721 * config/i386/nm-sun386.h: Ditto.
3722 * config/i386/nm-ptx4.h: Ditto.
3723 * config/i386/nm-i386mach.h: Ditto.
3724 * config/h8500/tm-h8500.h: Ditto.
3725 * config/h8300/tm-h8300.h: Ditto.
3726 * config/fr30/tm-fr30.h: Ditto.
3727 * config/d30v/tm-d30v.h: Ditto.
3728 * config/arm/tm-arm.h: Ditto.
3729 * config/arc/tm-arc.h: Ditto.
3730 * config/alpha/tm-alpha.h: Ditto.
3731 * config/a29k/tm-vx29k.h: Ditto.
3732 * config/a29k/tm-a29k.h: Ditto.
3733 * config/w65/tm-w65.h: Ditto.
3734 * config/vax/tm-vax.h: Ditto.
3735 * config/v850/tm-v850.h: Ditto.
3736 * config/tic80/tm-tic80.h: Ditto.
3737 * config/sparc/tm-sparclite.h: Ditto.
3738 * config/sparc/tm-sparclet.h: Ditto.
3739 * config/sparc/tm-sparc.h: Ditto.
3740 * config/sparc/nm-sun4sol2.h: Ditto.
3741 * config/sparc/nm-sun4os4.h: Ditto.
3742 * config/sparc/nm-nbsd.h: Ditto.
3743 * config/powerpc/nm-solaris.h: Ditto.
3744 * config/pa/tm-hppao.h: Ditto.
3745 * config/pa/tm-hppa.h: Ditto.
3746 * config/pa/nm-hppab.h: Ditto.
3747 * config/ns32k/tm-umax.h: Ditto.
3748 * config/ns32k/tm-merlin.h: Ditto.
3749 * config/nm-m3.h: Ditto.
3750 * config/nm-gnu.h: Ditto.
3754 * MAINTAINERS: Update list of targets. Mark arm-* and v850-elf as
3755 broken. Mark sh-*, ia64-linux and ns32k-netbsd as buildable.
3756 Specify an m88k target. Include sample GAWK script to generate
3757 target list. Delete non-existant romp target.
3758 * TODO (GDB 5.1 - Cleanups): Update.
3762 * linespec.c (decode_line_1): Skip argptr over a leading
3763 double quote. Prevents alloc of 0 bytes and memcpy of -1 bytes.
3767 * config/djgpp/fnchange.lst (ia64-aix-nat.c): Add entry.
3771 * ui-out.h: Remove #if __STDC__, assume an ISO-C compiler.
3774 * printcmd.c (printf_command): Ditto.
3775 * ch-exp.c (match_integer_literal): Ditto.
3776 * scm-tags.h: Ditto.
3777 * ser-go32.c: Ditto.
3778 * hppa-tdep.c (unwind_command): Ditto.
3779 * defs.h (volatile): Delete macro definition. Assume __STDC__.
3780 * remote-adapt.c (volatile): Ditto.
3781 * remote-eb.c (volatile): Ditto.
3782 * remote-mm.c (volatile): Ditto.
3783 * defs.h (alloca): Assume __STDC__, declare returning void *.
3787 * inferior.h (ARCH_NUM_REGS): Delete definition.
3788 * stack.c (frame_info): Use NUM_REGS, not ARCH_NUM_REGS.
3789 * regcache.c (registers_changed): Ditto.
3790 (registers_fetched): Ditto.
3791 * infptrace.c (fetch_inferior_registers): Ditto.
3792 (store_inferior_registers): Ditto.
3793 * infcmd.c (do_registers_info): Ditto.
3794 (registers_info): Ditto.
3795 * i386-linux-nat.c (old_fetch_inferior_registers): Ditto.
3796 (old_store_inferior_registers): Ditto.
3797 * gdbserver/low-linux.c (register_addr): Ditto.
3798 * gdbserver/low-hppabsd.c (register_addr): Ditto.
3799 * core-aout.c: Don't include "inferior.h".
3800 (fetch_core_registers): Use NUM_REGS not ARCH_NUM_REGS.
3801 (register_addr): Ditto.
3806 * cli/cli-script.c (define_command): Fix setting of post hooks.
3810 * i386-linux-tdep.c: Fix formatting and clarify comments.
3811 (i386_linux_svr4_fetch_link_map_offsets): Use NULL instead of 0
3816 * gnu-nat.c: Include "gdb_assert.h" instead of <assert.h>.
3817 (proc_update_sc): Use gdb_assert instead of assert.
3818 (proc_abort): Ditto.
3819 (inf_set_step_thread): Ditto.
3821 (S_exception_raise_request): Ditto.
3822 (gnu_terminal_init_inferior): Ditto.
3826 * Makefile.in (solib-svr4.o): Depend on solib-svr4.c, not solib.c.
3827 (solib-legacy.o): New makefile target.
3828 * solib-legacy.c: New file.
3829 * solib-svr4.h (SVR4_FETCH_LINK_MAP_OFFSETS): Delete.
3830 (default_svr4_fetch_link_map_offsets): Delete.
3831 (set_solib_svr4_fetch_link_map_offsets): Declare.
3832 (legacy_svr4_fetch_link_map_offsets_hook): Declare.
3833 * solib-svr4.c (elf/common.h): Include.
3834 (link.h): Only include for SunOS shared library support.
3835 (_SYSCALL32): Don't define.
3836 (SVR4_FETCH_LINK_MAP_OFFSETS): Define.
3837 (default_svr4_fetch_link_map_offsets): Made static; added forward
3839 (fetch_link_map_offsets): New static global.
3840 (legacy_svr4_fetch_link_map_offsets_hook): New global variable.
3841 (default_svr4_fetch_link_map_offsets): Rewritten. The guts
3842 of what used to be in this function now reside in
3843 legacy_svr4_fetch_link_map_offsets() in solib-legacy.c.
3844 (open_symbol_file_object): Fix declaration in SunOS section
3846 (set_solib_svr4_fetch_link_map_offsets): New extern function.
3847 (init_fetch_link_map_offsets): New static function.
3848 (_initialize_svr4_solib): Put static global fetch_link_map_offsets
3849 under multiarch control.
3851 * config/alpha/alpha-linux.mt (TDEPFILES): Add solib-legacy.o to
3853 * config/alpha/fbsd.mh (NATDEPFILES): Likewise.
3854 * config/arm/linux.mt (TDEPFILES): Likewise.
3855 * config/i386/fbsd.mh (NATDEPFILES): Likewise.
3856 * config/i386/i386dgux.mh (NATDEPFILES): Likewise.
3857 * config/i386/i386gnu.mh (NATDEPFILES): Likewise.
3858 * config/i386/i386sco5.mh (NATDEPFILES): Likewise.
3859 * config/i386/i386sol2.mt (TDEPFILES): Likewise.
3860 * config/i386/i386v4.mh (NATDEPFILES): Likewise.
3861 * config/i386/i386v42mp.mh (NATDEPFILES): Likewise.
3862 * config/i386/linux.mt (TDEPFILES): Likewise.
3863 * config/i386/nbsd.mh (NATDEPFILES): Likewise.
3864 * config/i386/nbsdelf.mh (NATDEPFILES): Likewise.
3865 * config/i386/ncr3000.mt (TDEPFILES): Likewise.
3866 * config/i386/ptx4.mh (XDEPFILES): Likewise.
3867 * config/i386/sun386.mt (TDEPFILES): Likewise.
3868 * config/ia64/linux.mt (TDEPFILES): Likewise.
3869 * config/m68k/linux.mt (TDEPFILES): Likewise.
3870 * config/m68k/m68kv4.mh (NATDEPFILES): Likewise.
3871 * config/m68k/nbsd.mh (NATDEPFILES): Likewise.
3872 * config/m68k/sun2os4.mt (TDEPFILES): Likewise.
3873 * config/m68k/sun3os4.mt (TDEPFILES): Likewise.
3874 * config/m88k/delta88v4.mh (NATDEPFILES): Likewise.
3875 * config/mips/mipsv4.mh (NATDEPFILES): Likewise.
3876 * config/ns32k/nbsd.mh (NATDEPFILES): Likewise.
3877 * config/powerpc/linux.mt (TDEPFILES): Likewise.
3878 * config/powerpc/nbsd.mh (NATDEPFILES): Likewise.
3879 * config/powerpc/solaris.mh (NATDEPFILES): Likewise.
3880 * config/sh/linux.mt (TDEPFILES): Likewise.
3881 * config/sparc/linux.mt (TDEPFILES): Likewise.
3882 * config/sparc/nbsd.mh (NATDEPFILES): Likewise.
3883 * config/sparc/nbsdelf.mh (NATDEPFILES): Likewise.
3884 * config/sparc/sp64linux.mt (TDEPFILES): Likewise.
3885 * config/sparc/sun4os4.mt (TDEPFILES): Likewise.
3886 * config/sparc/sun4sol2.mh (NATDEPFILES): Likewise.
3890 * utils.c (xmrealloc, xcalloc): Return NULL for zero-sized requests.
3894 * MAINTAINERS (Write After Approval): Update Philip Blundell.
3898 * MAINTAINERS: Add myself to write after approval list.
3902 * i387-tdep.c (print_i387_status_word): Fix printing of Stack
3903 fault flag. It is bit 6 of the x87 FPU status word, not bit 7.
3907 * configure.host (m88*-harris-cxux*): Mark as obsolete.
3908 * configure.tgt: Ditto.
3909 * config/m88k/xm-cxux.h: Ditto.
3910 * config/m88k/tm-cxux.h: Ditto.
3911 * config/m88k/nm-cxux.h: Ditto.
3912 * config/m88k/cxux.mt: Ditto.
3913 * config/m88k/cxux.mh: Ditto.
3917 * Makefile.in: Delete rules for obsolete files.
3921 * stack.c (parse_frame_specification): For one argument case,
3922 handle the situation where the argument is an integer, not an
3923 address -- arguably the most common case. This matters on
3924 targets where pointers and addresses are different.
3928 * TODO: Revise 5.1 list. Delete PARAMS task. Add coding standard
3929 review. Clarify GNU/LINUX/sparc. Move other tasks to 5.2 or
3934 * TODO (GDB 5.1 Known Problems): Document problem of building GDB
3935 with SID on Solaris 8.
3939 * defs.h: Provide prototypes for floatformat_is_negative,
3940 floatformat_is_nan and floatformat_mantissa.
3941 * utils.c: Include "gdb_assert.h".
3942 (floatformat_is_negative): New function.
3943 (floatformat_is_nan): New function.
3944 (floatformat_mantissa): New function.
3945 * valprint.c: Include "floatformat.h".
3946 (print_floating): Get rid of the Linux-specific
3947 TARGET_ANALYZE_FLOATING macro and rewrite NaN detection with the
3948 help these new functions. Print NaN's in a format conforming to
3953 * top.c (init_main): Make `set history file name' complete on file
3958 * Makefile.in (LINTFLAGS): Update to contain all of the macros
3959 which define include paths used when compiling.
3961 * util.c (savestring, msavestring): Change type of length argument.
3962 * defs.h (savestring, msavestring): Update to match.
3964 * symtab.h (decode_line_1): Removed declaration.
3966 * symfile.c (#include <assert.h>): Removed.
3968 * arch-utils.c (#include <ctype.h>): Removed.
3969 * c-typeprint.c: Likewise.
3970 * dbxread.c: Likewise.
3971 * gdbtypes.c: Likewise.
3972 * target.c: Likewise.
3973 * os9kread.c: Likewise.
3975 * c-valprint.c (#include "demangle.h"): Removed.
3976 * ch-typeprint.c: Likewise.
3978 * f-typeprint.c: Likewise.
3979 * f-valprint.c: Likewise.
3980 * m2-typeprint.c: Likewise.
3981 * typeprint.c: Likewise.
3982 * p-typeprint.c: Likewise.
3983 * valarith.c: Likewise.
3984 * valprint.c: Likewise.
3986 * m2-typeprint.c (#include "gdb_string.h"): Removed.
3987 * nlmread.c: Likewise.
3989 * mdebugread.c (#include "gdb-stabs.h"): Removed.
3990 * minsyms.c: Likewise.
3991 * mipsread.c: Likewise.
3992 * nlmread.c: Likewise.
3994 * m2-typeprint.c (#include "obstack.h"): Removed.
3995 * m2-valprint.c: Likewise.
3997 * event-loop.c (#include <setjmp.h>): Removed.
4001 * MAINTAINERS: Remove self from specific maintenance domains
4002 (macos, gdbserver, documentation, testsuite).
4006 * 29k-share/udi/udip2soc.c, Makefile.in, a29k-tdep.c,
4007 a68v-nat.c, abug-rom.c, aclocal.m4, alpha-nat.c, alpha-tdep.c,
4008 annotate.c, annotate.h, arc-tdep.c, arch-utils.c,
4009 arch-utils.h, arm-tdep.c, ax-gdb.c, ax-gdb.h, ax-general.c,
4010 ax.h, bcache.c, bcache.h, blockframe.c, breakpoint.c,
4011 breakpoint.h, buildsym.c, buildsym.h, c-exp.y, c-lang.c,
4012 c-lang.h, c-typeprint.c, c-valprint.c, call-cmds.h, ch-exp.c,
4013 ch-lang.c, ch-lang.h, ch-typeprint.c, ch-valprint.c,
4014 cli/cli-cmds.h, cli/cli-decode.c, cli/cli-decode.h,
4015 cli/cli-script.c, cli/cli-script.h, cli/cli-setshow.h,
4016 cli/cli-utils.h, cli-out.c, cli-out.h, coff-solib.c,
4017 coff-solib.h, coffread.c, command.h, complaints.c,
4018 complaints.h, completer.c, completer.h,
4019 config/a29k/nm-ultra3.h, config/a29k/tm-a29k.h,
4020 config/a29k/tm-ultra3.h, config/a29k/tm-vx29k.h,
4021 config/a29k/xm-ultra3.h, config/alpha/nm-fbsd.h,
4022 config/alpha/nm-linux.h, config/alpha/nm-osf.h,
4023 config/alpha/nm-osf2.h, config/alpha/nm-osf3.h,
4024 config/alpha/tm-alpha.h, config/alpha/tm-alphalinux.h,
4025 config/alpha/xm-alphalinux.h, config/alpha/xm-alphaosf.h,
4026 config/alpha/xm-fbsd.h, config/arc/tm-arc.h,
4027 config/arm/nm-linux.h, config/arm/tm-arm.h,
4028 config/arm/tm-embed.h, config/d10v/tm-d10v.h,
4029 config/d30v/tm-d30v.h, config/fr30/tm-fr30.h,
4030 config/h8300/tm-h8300.h, config/h8500/tm-h8500.h,
4031 config/i386/nm-fbsd.h, config/i386/nm-gnu.h,
4032 config/i386/nm-i386bsd.h, config/i386/nm-i386mach.h,
4033 config/i386/nm-i386sco.h, config/i386/nm-i386sol2.h,
4034 config/i386/nm-i386v.h, config/i386/nm-i386v4.h,
4035 config/i386/nm-i386v42mp.h, config/i386/nm-linux.h,
4036 config/i386/nm-nbsd.h, config/i386/nm-nbsdelf.h,
4037 config/i386/nm-ptx4.h, config/i386/nm-sun386.h,
4038 config/i386/nm-symmetry.h, config/i386/tm-cygwin.h,
4039 config/i386/tm-fbsd.h, config/i386/tm-i386.h,
4040 config/i386/tm-i386aix.h, config/i386/tm-i386bsd.h,
4041 config/i386/tm-i386gnu.h, config/i386/tm-i386lynx.h,
4042 config/i386/tm-i386m3.h, config/i386/tm-i386mk.h,
4043 config/i386/tm-i386nw.h, config/i386/tm-i386os9k.h,
4044 config/i386/tm-i386sco5.h, config/i386/tm-i386sol2.h,
4045 config/i386/tm-i386v.h, config/i386/tm-i386v4.h,
4046 config/i386/tm-i386v42mp.h, config/i386/tm-linux.h,
4047 config/i386/tm-nbsd.h, config/i386/tm-ptx.h,
4048 config/i386/tm-ptx4.h, config/i386/tm-sun386.h,
4049 config/i386/tm-symmetry.h, config/i386/tm-vxworks.h,
4050 config/i386/xm-fbsd.h, config/i386/xm-i386bsd.h,
4051 config/i386/xm-i386gnu.h, config/i386/xm-i386m3.h,
4052 config/i386/xm-i386mach.h, config/i386/xm-i386mk.h,
4053 config/i386/xm-i386sco.h, config/i386/xm-i386v4.h,
4054 config/i386/xm-linux.h, config/i386/xm-nbsd.h,
4055 config/i386/xm-ptx.h, config/i386/xm-ptx4.h,
4056 config/i386/xm-sun386.h, config/i386/xm-symmetry.h,
4057 config/i960/tm-i960.h, config/i960/tm-mon960.h,
4058 config/i960/tm-nindy960.h, config/i960/tm-vx960.h,
4059 config/ia64/nm-aix.h, config/ia64/nm-linux.h,
4060 config/ia64/tm-aix.h, config/ia64/tm-ia64.h,
4061 config/ia64/tm-linux.h, config/ia64/xm-aix.h,
4062 config/ia64/xm-linux.h, config/m68k/nm-apollo68b.h,
4063 config/m68k/nm-delta68.h, config/m68k/nm-dpx2.h,
4064 config/m68k/nm-hp300bsd.h, config/m68k/nm-hp300hpux.h,
4065 config/m68k/nm-linux.h, config/m68k/nm-sun3.h,
4066 config/m68k/tm-apollo68b.h, config/m68k/tm-cisco.h,
4067 config/m68k/tm-dpx2.h, config/m68k/tm-es1800.h,
4068 config/m68k/tm-hp300bsd.h, config/m68k/tm-hp300hpux.h,
4069 config/m68k/tm-isi.h, config/m68k/tm-linux.h,
4070 config/m68k/tm-m68k.h, config/m68k/tm-m68kv4.h,
4071 config/m68k/tm-mac.h, config/m68k/tm-monitor.h,
4072 config/m68k/tm-nbsd.h, config/m68k/tm-news.h,
4073 config/m68k/tm-os68k.h, config/m68k/tm-sun3.h,
4074 config/m68k/tm-vx68.h, config/m68k/xm-3b1.h,
4075 config/m68k/xm-apollo68b.h, config/m68k/xm-dpx2.h,
4076 config/m68k/xm-hp300bsd.h, config/m68k/xm-hp300hpux.h,
4077 config/m68k/xm-linux.h, config/m68k/xm-m68kv4.h,
4078 config/m68k/xm-mpw.h, config/m68k/xm-news.h,
4079 config/m68k/xm-sun2.h, config/m68k/xm-sun3.h,
4080 config/m68k/xm-sun3os4.h, config/m88k/nm-delta88v4.h,
4081 config/m88k/tm-delta88.h, config/m88k/tm-delta88v4.h,
4082 config/m88k/tm-m88k.h, config/m88k/xm-cxux.h,
4083 config/m88k/xm-delta88.h, config/m88k/xm-delta88v4.h,
4084 config/m88k/xm-dgux.h, config/mcore/tm-mcore.h,
4085 config/mips/nm-irix3.h, config/mips/nm-irix4.h,
4086 config/mips/nm-irix5.h, config/mips/nm-mips.h,
4087 config/mips/nm-news-mips.h, config/mips/tm-bigmips.h,
4088 config/mips/tm-embed.h, config/mips/tm-embed64.h,
4089 config/mips/tm-embedl.h, config/mips/tm-embedl64.h,
4090 config/mips/tm-irix3.h, config/mips/tm-irix5.h,
4091 config/mips/tm-mips.h, config/mips/tm-mips64.h,
4092 config/mips/tm-mipsm3.h, config/mips/tm-mipsv4.h,
4093 config/mips/tm-tx39.h, config/mips/tm-tx39l.h,
4094 config/mips/tm-vr4100.h, config/mips/tm-vr4300.h,
4095 config/mips/tm-vr4300el.h, config/mips/tm-vr4xxx.h,
4096 config/mips/tm-vr4xxxel.h, config/mips/tm-vr5000.h,
4097 config/mips/tm-vr5000el.h, config/mips/xm-irix3.h,
4098 config/mips/xm-irix4.h, config/mips/xm-irix5.h,
4099 config/mips/xm-mips.h, config/mips/xm-mipsm3.h,
4100 config/mips/xm-mipsv4.h, config/mips/xm-news-mips.h,
4101 config/mips/xm-riscos.h, config/mn10200/tm-mn10200.h,
4102 config/mn10300/tm-mn10300.h, config/nm-gnu.h,
4103 config/nm-linux.h, config/nm-lynx.h, config/nm-m3.h,
4104 config/nm-sysv4.h, config/none/nm-none.h,
4105 config/none/tm-none.h, config/none/xm-none.h,
4106 config/ns32k/nm-nbsd.h, config/ns32k/nm-umax.h,
4107 config/ns32k/tm-merlin.h, config/ns32k/tm-nbsd.h,
4108 config/ns32k/tm-ns32km3.h, config/ns32k/tm-umax.h,
4109 config/ns32k/xm-merlin.h, config/ns32k/xm-ns32km3.h,
4110 config/pa/nm-hppab.h, config/pa/nm-hppah.h,
4111 config/pa/nm-hppao.h, config/pa/tm-hppa.h,
4112 config/pa/tm-hppa64.h, config/pa/tm-hppah.h,
4113 config/pa/xm-hppab.h, config/pa/xm-hppah.h,
4114 config/powerpc/nm-aix.h, config/powerpc/nm-linux.h,
4115 config/powerpc/nm-macos.h, config/powerpc/nm-nbsd.h,
4116 config/powerpc/tm-cygwin.h, config/powerpc/tm-linux.h,
4117 config/powerpc/tm-macos.h, config/powerpc/tm-ppc-aix.h,
4118 config/powerpc/tm-ppc-eabi.h, config/powerpc/tm-ppc-nw.h,
4119 config/powerpc/tm-ppcle-eabi.h, config/powerpc/tm-solaris.h,
4120 config/powerpc/xm-aix.h, config/powerpc/xm-linux.h,
4121 config/powerpc/xm-mpw.h, config/rs6000/nm-rs6000.h,
4122 config/rs6000/tm-rs6000.h, config/rs6000/tm-rs6000ly.h,
4123 config/rs6000/xm-aix4.h, config/rs6000/xm-rs6000.h,
4124 config/sh/tm-linux.h, config/sh/tm-sh.h, config/sh/tm-wince.h,
4125 config/sparc/nm-linux.h, config/sparc/nm-nbsd.h,
4126 config/sparc/nm-nbsdelf.h, config/sparc/nm-sparclynx.h,
4127 config/sparc/nm-sun4os4.h, config/sparc/nm-sun4sol2.h,
4128 config/sparc/tm-linux.h, config/sparc/tm-sp64.h,
4129 config/sparc/tm-sp64sim.h, config/sparc/tm-sparc.h,
4130 config/sparc/tm-sparclet.h, config/sparc/tm-sparclite.h,
4131 config/sparc/tm-sparclynx.h, config/sparc/tm-spc-em.h,
4132 config/sparc/tm-sun4os4.h, config/sparc/tm-sun4sol2.h,
4133 config/sparc/xm-sun4os4.h, config/sparc/xm-sun4sol2.h,
4134 config/tic80/tm-tic80.h, config/tm-linux.h, config/tm-lynx.h,
4135 config/tm-sysv4.h, config/v850/tm-v850.h, config/vax/tm-vax.h,
4136 config/w65/tm-w65.h, config/xm-aix4.h, config/xm-lynx.h,
4137 config/xm-mpw.h, config/xm-nbsd.h, config/xm-sysv4.h,
4138 config/z8k/tm-z8k.h, configure.in, core-aout.c, core-regset.c,
4139 core-sol2.c, corefile.c, corelow.c, cp-valprint.c,
4140 cpu32bug-rom.c, cxux-nat.c, d10v-tdep.c, d30v-tdep.c,
4141 dbug-rom.c, dbxread.c, dcache.c, dcache.h, defs.h,
4142 delta68-nat.c, demangle.c, dink32-rom.c, dpx2-nat.c, dsrec.c,
4143 dstread.c, dve3900-rom.c, dwarf2read.c, dwarfread.c,
4144 elfread.c, environ.c, environ.h, eval.c, event-loop.c,
4145 event-loop.h, event-top.c, exec.c, expprint.c, f-exp.y,
4146 f-lang.c, f-lang.h, f-typeprint.c, f-valprint.c, findvar.c,
4147 fork-child.c, fr30-tdep.c, frame.c, frame.h, gdb-events.c,
4148 gdb-events.h, gdb-events.sh, gdb-stabs.h, gdb.1, gdb_string.h,
4149 gdb_thread_db.h, gdbcmd.h, gdbcore.h, gdbserver/Makefile.in,
4150 gdbserver/gdbreplay.c, gdbserver/gdbserver.1,
4151 gdbserver/low-hppabsd.c, gdbserver/low-linux.c,
4152 gdbserver/low-lynx.c, gdbserver/low-nbsd.c,
4153 gdbserver/low-sim.c, gdbserver/low-sparc.c,
4154 gdbserver/low-sun3.c, gdbserver/remote-utils.c,
4155 gdbserver/server.c, gdbserver/server.h, gdbserver/utils.c,
4156 gdbthread.h, gdbtypes.c, gdbtypes.h, gnu-nat.c, gnu-nat.h,
4157 gnu-regex.c, gnu-regex.h, h8300-tdep.c, h8500-tdep.c,
4158 hp-psymtab-read.c, hp-symtab-read.c, hp300ux-nat.c,
4159 hppa-tdep.c, hppab-nat.c, hppah-nat.c, hppam3-nat.c, hpread.c,
4160 hpread.h, hpux-thread.c, i386-tdep.c, i386aix-nat.c,
4161 i386b-nat.c, i386gnu-nat.c, i386ly-tdep.c, i386m3-nat.c,
4162 i386mach-nat.c, i386nbsd-nat.c, i386nbsd-tdep.c, i386v-nat.c,
4163 i386v4-nat.c, i387-tdep.c, i960-tdep.c, infcmd.c, inferior.h,
4164 inflow.c, infptrace.c, infrun.c, inftarg.c, infttrace.c,
4165 irix4-nat.c, irix5-nat.c, isi-xdep.c, jv-exp.y, jv-lang.c,
4166 jv-lang.h, jv-typeprint.c, jv-valprint.c, kdb-start.c,
4167 kod-cisco.c, kod.c, language.c, language.h, lin-thread.c,
4168 linespec.c, linespec.h, linux-thread.c, lynx-nat.c, m2-exp.y,
4169 m2-lang.c, m2-lang.h, m2-typeprint.c, m2-valprint.c, m3-nat.c,
4170 m32r-rom.c, m32r-tdep.c, m68k-tdep.c, m68klinux-nat.c,
4171 m68knbsd-nat.c, m88k-nat.c, m88k-tdep.c, mac-nat.c,
4172 mac-xdep.c, main.c, maint.c, mcore-rom.c, mcore-tdep.c,
4173 mdebugread.c, mem-break.c, minimon.h, minsyms.c, mips-nat.c,
4174 mips-tdep.c, mipsm3-nat.c, mipsread.c, mipsv4-nat.c,
4175 mn10200-tdep.c, mn10300-tdep.c, mon960-rom.c, monitor.c,
4176 monitor.h, news-xdep.c, nindy-share/env.h, nindy-tdep.c,
4177 nlm/Makefile.in, nlmread.c, ns32k-tdep.c, ns32km3-nat.c,
4178 ns32knbsd-nat.c, objfiles.c, objfiles.h, ocd.c, ocd.h,
4179 op50-rom.c, os9kread.c, osfsolib.c, p-exp.y, pa64solib.c,
4180 pa64solib.h, parse.c, parser-defs.h, partial-stab.h,
4181 ppc-bdm.c, ppc-linux-nat.c, ppc-linux-tdep.c, ppcbug-rom.c,
4182 ppcnbsd-nat.c, printcmd.c, proc-api.c, proc-events.c,
4183 proc-flags.c, proc-utils.h, proc-why.c, procfs.c, ptx4-nat.c,
4184 rdi-share/Makefile.in, rdi-share/aclocal.m4, regcache.c,
4185 regcache.h, remote-adapt.c, remote-array.c, remote-bug.c,
4186 remote-e7000.c, remote-eb.c, remote-es.c, remote-est.c,
4187 remote-hms.c, remote-mips.c, remote-mm.c, remote-nindy.c,
4188 remote-nrom.c, remote-os9k.c, remote-rdi.c, remote-rdp.c,
4189 remote-sds.c, remote-sim.c, remote-st.c, remote-udi.c,
4190 remote-utils.c, remote-utils.h, remote-vx.c, remote.c,
4191 remote.h, reply_mig_hack.awk, rom68k-rom.c, rs6000-nat.c,
4192 rs6000-tdep.c, scm-exp.c, scm-lang.c, scm-lang.h, scm-tags.h,
4193 scm-valprint.c, ser-e7kpc.c, ser-mac.c, ser-ocd.c, ser-pipe.c,
4194 ser-tcp.c, ser-unix.c, serial.c, serial.h, sh-tdep.c,
4195 sh3-rom.c, sol-thread.c, solib-aix5.c, solib-svr4.c, solib.c,
4196 solib.h, solist.h, somread.c, somsolib.c, somsolib.h,
4197 source.c, sparc-nat.c, sparc-tdep.c, sparcl-tdep.c,
4198 sparclet-rom.c, srec.h, stabsread.c, stabsread.h, stack.c,
4199 standalone.c, stop-gdb.c, stuff.c, sun3-nat.c, sun386-nat.c,
4200 symfile.c, symfile.h, symm-nat.c, symm-tdep.c, symmisc.c,
4201 symtab.c, symtab.h, target.c, target.h, terminal.h, thread.c,
4202 tic80-tdep.c, top.c, top.h, tracepoint.c, tracepoint.h,
4203 typeprint.c, ui-file.c, ui-file.h, ui-out.h, ultra3-nat.c,
4204 ultra3-xdep.c, umax-xdep.c, utils.c, v850-tdep.c, v850ice.c,
4205 valarith.c, valops.c, valprint.c, value.h, values.c, varobj.h,
4206 vax-tdep.c, version.h, vx-share/vxWorks.h, vx-share/xdr_ld.c,
4207 vx-share/xdr_ptrace.c, vx-share/xdr_ptrace.h,
4208 vx-share/xdr_rdb.c, w65-tdep.c, w89k-rom.c, win32-nat.c,
4209 wrapper.c, wrapper.h, xcoffread.c, xcoffsolib.c, xcoffsolib.h,
4210 xmodem.c, xmodem.h, z8k-tdep.c: Update/correct copyright
4215 * acconfig.h (HAVE_PRSYSENT_T, HAVE_PR_SIGSET_T,
4216 HAVE_PR_SIGACTION64_T, HAVE_PR_SIGINFO64_T): New configure
4218 * configure.in (prsysent_t, pr_sigset_t, pr_sigaction64_t,
4219 pr_siginfo64_t): Test for these typedefs in <sys/procfs.h>.
4220 (sys/fault.h, sys/select.h): Test for presence of these
4222 (ia64-*-aix*): Define NEW_PROC_API for this host.
4223 * configure: Regenerate.
4224 * config.in: Regenerate.
4226 * configure.host (ia64-*-aix*): New host.
4227 * configure.tgt (ia64-*-aix*): New target.
4231 * TODO (GDB 5.1 Known Problems): Document z8k as broken.
4235 * wince.c: Change realloc to xrealloc throughout.
4236 (handle_load_dll): Use void * rather than PTR in argument.
4240 * ocd.h (ocd_xfer_memory): Add ``attrib'' parameter.
4241 * ocd.c (ocd_xfer_memory): Ditto.
4242 * ser-ocd.c (ocd_setstopbits): New function. Add to ocd_ops.
4243 * MAINTAINERS: Document powerpc-eabi and powerpcle-eabi as
4244 buildable with ,-Werror.
4246 * Makefile.in (symfile_h): Define.
4247 (mcore-tdep.o): Add $(symfile_h), $(gdbcore_h) and $(inferior_h).
4248 * mcore-tdep.c: Include "symfile.h", "gdbcore.h" and "inferior.h".
4249 * MAINTAINERS: Document mcore-elf and mcore-pe as buildable with
4252 * dsrec.c (make_srec): Fix internal_error fmt arg.
4253 * MAINTAINERS: Document i960-coff as buildable with ,-Werror.
4257 * solib-aix5.c (aix5_relocate_main_executable): Don't use ANOFFSET
4262 * MAINTAINERS (paper trail): Update.
4264 * CONTRIBUTE: Update note on ``Fix PR gdb/4706'' convention.
4269 * mn10200-tdep.c (mn10200_frame_chain): Pass 0 for ``pc''
4270 parameter to mn10200_analyze_prologue.
4272 * config/mn10200/tm-mn10200.h: Include "regcache.h".
4273 * MAINTAINERS: Document that mn10200-elf target is buildable.
4277 * config/ia64/xm-aix.h (GDB_GREGSET_T, GDB_FPREGSET_T): Move defines
4279 * config/ia64/nm-aix.h (GDB_GREGSET_T, GDB_FPREGSET_T): ...to here.
4280 (MONTEREY): Don't define.
4285 * config/mn10300/tm-mn10300.h (E0_REGNUM): Correct to 15.
4289 * sparc-nat.c (sparc-nat.c): Don't include self.
4293 * defs.h (__CYGWIN__): Moved conditional which defines __CYGWIN__
4294 if __CYGWIN32__ is set from here.
4295 * config/i386/xm-cygwin.h: To here.
4296 * config/powerpc/xm-cygwin.h: To here.
4298 * i386-stub.c (handle_exception): Use 'T' response packet.
4302 * m32r-tdep.c: Fix cut and paste error in comment.
4306 * symtab.c (print_msymbol_info): Print addresses by portable method
4307 longest_local_hex_string_custom. Allow for 64-bit addresses.
4311 * gdbtypes.h (builtin_type_f_integer): Removed duplicate declaration.
4312 (MAX_OF_TYPE): Wrap macro definition in parenthesis.
4313 (MIN_OF_TYPE): Likewise.
4315 * memattr.h (mem_access_mode): Removed extraneous trailing comma.
4319 * Makefile.in (os9kread.o): Do not compile with WERROR_CFLAGS.
4320 * os9kread.c (os9k_process_one_symbol): Add assert to detect
4321 ``loses if sizeof (char *) > sizeof (int)''.
4325 * gdb_assert.h: Document pragmatics behind gdb_assert's case.
4329 * Makefile.in (gdbtk-cmds.o): Add $(regcache_h) to dependency
4335 * Makefile.in (regcache_h): Define. Add $(regcache_h) to
4340 * printcmd.c (print_address_numeric): Update comments to refer
4341 to sizeof addr, not sizeof pointer.
4342 (x_command): Remove needless whitespace (shorten long line).
4344 * breakpoint.c (print_one_breakpoint): Formatting clean-up.
4345 (read_memory_nobpt): Ditto.
4346 (ep_is_catchpoint): Ditto.
4347 (ep_is_shlib_catchpoint): Ditto.
4348 (ep_is_exception_catchpoint): Ditto.
4349 (describe_other_breakpoints): Ditto.
4353 * regcache.h (register_valid): Fix comment documenting valid
4358 From Steven Johnson:
4359 * regcache.h: New file.
4361 * value.h (read_register_bytes, read_register_gen)
4362 (write_register_gen, write_register_bytes)
4363 (read_register, read_register_pid)
4364 (read_signed_register, read_signed_register_pid)
4365 (write_register, write_register_pid)
4366 (register_cached, set_register_cached)
4367 (register_changed, register_buffer)
4368 (registers_changed, supply_register): Move declaration from here.
4369 * regcache.h: To here.
4370 * gdbcore.h (registers_fetched): Ditto.
4371 * inferior.h (registers, registers_valid): Ditto.
4373 * regcache.c (generic_target_read_pc, read_pc_pid, read_pc,
4374 generic_target_write_pc, write_pc_pid, write_pc,
4375 generic_target_read_sp, read_sp, generic_target_write_sp,
4376 write_sp, generic_target_read_fp, read_fp,
4377 generic_target_write_fp, write_fp): Add note that these functions
4378 will be moved from this file.
4380 * a29k-tdep.c: Include "regcache.h".
4381 * a68v-nat.c: Ditto.
4382 * abug-rom.c: Ditto.
4383 * alpha-nat.c: Ditto.
4384 * alpha-tdep.c: Ditto.
4385 * alphabsd-nat.c: Ditto.
4386 * arc-tdep.c: Ditto.
4387 * arm-linux-nat.c: Ditto.
4388 * arm-linux-tdep.c: Ditto.
4389 * arm-tdep.c: Ditto.
4390 * blockframe.c: Ditto.
4391 * core-aout.c: Ditto.
4392 * core-sol2.c: Ditto.
4394 * cpu32bug-rom.c: Ditto.
4395 * cxux-nat.c: Ditto.
4396 * d10v-tdep.c: Ditto.
4397 * d30v-tdep.c: Ditto.
4398 * dbug-rom.c: Ditto.
4399 * dink32-rom.c: Ditto.
4400 * dve3900-rom.c: Ditto.
4402 * fr30-tdep.c: Ditto.
4404 * go32-nat.c: Ditto.
4405 * h8300-tdep.c: Ditto.
4406 * h8500-tdep.c: Ditto.
4407 * hp300ux-nat.c: Ditto.
4408 * hppa-tdep.c: Ditto.
4409 * hppab-nat.c: Ditto.
4410 * hppah-nat.c: Ditto.
4411 * hppam3-nat.c: Ditto.
4412 * hpux-thread.c: Ditto.
4413 * i386-linux-nat.c: Ditto.
4414 * i386-linux-tdep.c: Ditto.
4415 * i386-tdep.c: Ditto.
4416 * i386aix-nat.c: Ditto.
4417 * i386b-nat.c: Ditto.
4418 * i386bsd-nat.c: Ditto.
4419 * i386gnu-nat.c: Ditto.
4420 * i386ly-tdep.c: Ditto.
4421 * i386m3-nat.c: Ditto.
4422 * i386mach-nat.c: Ditto.
4423 * i386nbsd-nat.c: Ditto.
4424 * i386v4-nat.c: Ditto.
4425 * i387-nat.c: Ditto.
4426 * i387-tdep.c: Ditto.
4427 * i960-tdep.c: Ditto.
4428 * ia64-aix-nat.c: Ditto.
4429 * ia64-linux-nat.c: Ditto.
4430 * ia64-tdep.c: Ditto.
4431 * infptrace.c: Ditto.
4433 * irix4-nat.c: Ditto.
4434 * irix5-nat.c: Ditto.
4436 * lin-thread.c: Ditto.
4437 * lynx-nat.c: Ditto.
4439 * m32r-rom.c: Ditto.
4440 * m32r-tdep.c: Ditto.
4441 * m68hc11-tdep.c: Ditto.
4442 * m68k-tdep.c: Ditto.
4443 * m68klinux-nat.c: Ditto.
4444 * m68knbsd-nat.c: Ditto.
4445 * m68knbsd-tdep.c: Ditto.
4446 * m88k-nat.c: Ditto.
4447 * m88k-tdep.c: Ditto.
4449 * mcore-rom.c: Ditto.
4450 * mcore-tdep.c: Ditto.
4451 * mi/mi-main.c: Ditto.
4452 * mips-nat.c: Ditto.
4453 * mips-tdep.c: Ditto.
4454 * mipsm3-nat.c: Ditto.
4455 * mipsv4-nat.c: Ditto.
4456 * mn10200-tdep.c: Ditto.
4457 * mn10300-tdep.c: Ditto.
4459 * ns32km3-nat.c: Ditto.
4460 * ns32knbsd-nat.c: Ditto.
4462 * pa64solib.c: Ditto.
4464 * ppc-linux-nat.c: Ditto.
4465 * ppc-linux-tdep.c: Ditto.
4466 * ppcbug-rom.c: Ditto.
4467 * ppcnbsd-nat.c: Ditto.
4468 * ptx4-nat.c: Ditto.
4469 * regcache.c: Ditto.
4470 * remote-adapt.c: Ditto.
4471 * remote-array.c: Ditto.
4472 * remote-bug.c: Ditto.
4473 * remote-e7000.c: Ditto.
4474 * remote-eb.c: Ditto.
4475 * remote-es.c: Ditto.
4476 * remote-est.c: Ditto.
4477 * remote-hms.c: Ditto.
4478 * remote-mips.c: Ditto.
4479 * remote-mm.c: Ditto.
4480 * remote-nindy.c: Ditto.
4481 * remote-os9k.c: Ditto.
4482 * remote-rdi.c: Ditto.
4483 * remote-rdp.c: Ditto.
4484 * remote-sds.c: Ditto.
4485 * remote-sim.c: Ditto.
4486 * remote-st.c: Ditto.
4487 * remote-udi.c: Ditto.
4488 * remote-utils.c: Ditto.
4489 * remote-vx.c: Ditto.
4490 * remote-vx29k.c: Ditto.
4491 * remote-vx68.c: Ditto.
4492 * remote-vx960.c: Ditto.
4493 * remote-vxmips.c: Ditto.
4494 * remote-vxsparc.c: Ditto.
4496 * rom68k-rom.c: Ditto.
4497 * rs6000-nat.c: Ditto.
4498 * rs6000-tdep.c: Ditto.
4501 * sol-thread.c: Ditto.
4502 * solib-svr4.c: Ditto.
4503 * somsolib.c: Ditto.
4504 * sparc-nat.c: Ditto.
4505 * sparc-tdep.c: Ditto.
4506 * sparcl-tdep.c: Ditto.
4507 * sparclet-rom.c: Ditto.
4508 * sun3-nat.c: Ditto.
4509 * sun386-nat.c: Ditto.
4510 * symm-nat.c: Ditto.
4512 * thread-db.c: Ditto.
4514 * tic80-tdep.c: Ditto.
4515 * tracepoint.c: Ditto.
4516 * ultra3-nat.c: Ditto.
4517 * umax-xdep.c: Ditto.
4518 * uw-thread.c: Ditto.
4519 * v850-tdep.c: Ditto.
4522 * w65-tdep.c: Ditto.
4523 * w89k-rom.c: Ditto.
4524 * win32-nat.c: Ditto.
4526 * z8k-tdep.c: Ditto.
4530 * MAINTAINERS: Add Matt Hiller to Write After Approval list.
4534 * mn10300-tdep.c (mn10300_stab_reg_to_regnum): New function.
4535 (mn10300_gdbarch_init): Set appropriate elements of gdbarch to
4536 mn10300_stab_reg_to_regnum.
4540 * symtab.c (search_symbols): Fix off by one error in test for
4545 * config/sparc/sp64linux.mt: New file.
4546 * configure.tgt: Recognize sparc64-*-linux* as a sp64linux target.
4547 * configure.host: Recognize sparc64-*-linux* as a linux host.
4550 * config/sparc/tm-sp64linux.h: New file.
4554 * buildsym.c (push_subfile, pop_subfile): Replace call to abort()
4555 with call to internal_error().
4556 * dbxread.c (process_one_symbol): Likewise.
4557 * exec.c (build_section_table, xfer_memory): Likewise.
4558 * h8500-tdep.c (h8500_register_size, h8500_register_virtual_type):
4560 * hpread.c (hpread_type_translate, hpread_read_array_type)
4561 (hpread_type_lookup): Likewise.
4562 * i386-tdep.c (gdb_print_insn_i386): Likewise.
4563 * i960-tdep.c (mem): Likewise
4564 * inflow.c (set_sigio_trap, clear_sigio_trap): Likewise.
4565 * infptrace.c (child_resume): Likewise.
4566 * infttrace.c (_initialize_infttrace): Likewise.
4567 * language.c (binop_result_type, add_language): Likewise.
4568 * lynx-nat.c (store_inferior_registers): Likewise.
4569 * m3-nat.c (port_chain_insert, m3_trace_me): Likewise.
4570 * mdebugread.c (parse_partial_symbols): Likewise.
4571 * monitor.c (monitor_printf_noecho, monitor_printf)
4572 (monitor_dump_regs): Likewise.
4573 * ocd.c (stu_put_packet): Likewise.
4574 * printcmd.c (decode_format, print_scalar_formatted): Likewise.
4575 * remote-bug.c (bug_open): Likewise.
4576 * remote-e7000.c (fetch_regs_from_dump, e7000_wait): Likewise.
4577 * remote-es.c (es1800_read_bytes): Likewise.
4578 * remote-mips.c (common_breakpoint): Likewise.
4579 * remote-rdp.c (send_rdp): Likewise.
4580 * remote-sds.c (putmessage): Likewise.
4581 * sparc-nat.c (fetch_inferior_registers, store_inferior_registers):
4583 * sparcl-tdep.c (sparclite_download): Likewise.
4584 * symtab.c (lookup_partial_symbol): Likewise.
4585 * target.c (push_target, pop_target, initialize_targets): Likewise.
4586 * utils.c (internal_verror, malloc_botch, wrap_here, decimal2str):
4588 * valprint.c (print_decimal, print_longest, print_longest)
4589 (strcat_longest): Likewise.
4590 * w65-tdep.c (init_frame_pc, w65_push_dummy_frame): Likewise.
4591 * xmodem.c (xmodem_send_packet): Likewise.
4592 * z8k-tdep.c (init_frame_pc, z8k_push_dummy_frame): Likewise.
4593 * config/h8500/tm-h8500.h (STORE_STRUCT_RETURN): Likewise.
4594 * config/mn10200/tm-mn10200.h (EXTRACT_RETURN_VALUE)
4595 (STORE_RETURN_VALUE): Likewise.
4596 * config/ns32k/nm-umax.h (REGISTER_U_ADDR): Likewise.
4597 * config/ns32k/xm-merlin.h (REGISTER_U_ADDR): Likewise.
4598 * config/z8k/tm-z8k.h (STORE_STRUCT_RETURN, STORE_RETURN_VALUE):
4603 * CONTRIBUTE: Document how to cite a problem report.
4604 * TODO: Note need to replace CONTRIBUTE with generated file.
4606 * CONTRIBUTE: Mention that patches do not need to include the
4607 generated files gdbarch.h and gdbarch.c.
4611 * value.h (get_saved_register): Move from here.
4616 * solib.h (in_svr4_dynsym_resolve_code): Delete declaration.
4617 (in_solib_dynsym_resolve_code): Add declaration.
4618 (IN_SOLIB_DYNSYM_RESOLVE_CODE): Changed define to invoke
4619 in_solib_dynsym_resolve_code() rather than
4620 in_svr4_dynsym_resolve_code(). Also, removed the ifdefs
4621 which caused this macro to only be defined when
4622 SVR4_SHARED_LIBS is defined.
4623 * solib.c (in_solib_dynsym_resolve_code): New function.
4624 * solist.h (struct target_so_ops): Add new member
4625 in_dynsym_resolve_code.
4626 * solib-aix5.c (aix5_in_dynsym_resolve_code): Renamed from
4627 in_svr4_dynsym_resolve_code. Also, made static.
4628 (_initialize_aix5_solib): Initialize in_dynsym_resolve_code
4629 member in aix5_so_ops.
4630 * solib-svr4.c (svr4_in_dynsym_resolve_code): Renamed from
4631 in_svr4_dynsym_resolve_code. Also, added second version
4632 of this function which will be used when SVR4_SHARED_LIBS
4634 (_initialize_svr4_solib): Initialize in_dynsym_resolve_code
4635 member in svr4_so_ops.
4637 * ia64-aix-nat.c, ia64-aix-tdep.c, config/ia64/aix.mh,
4638 config/ia64/aix.mt, config/ia64/nm-aix.h, config/ia64/tm-aix.h,
4639 config/ia64/xm-aix.h: New files.
4640 * ia64-tdep.c (_initialize_ia64_tdep): Remove declaration.
4641 (ia64_aix_sigcontext_register_address): New declaration.
4642 (ia64_gdbarch_init): Provide for initialization of
4643 sigcontext_register_address member of struct tdep when
4644 on target is detected to be running AIX.
4645 * config/ia64/linux.mt (TDEPFILES): Add ia64-aix-tdep.o to
4650 * ia64-tdep.c (ia64_frameless_function_invocation): Implement.
4651 * config/ia64/linux.mh (NATDEPFILES): Use thread-db.o and lin-lwp.o
4652 for thread support instead of linux-thread.o and lin-thread.o.
4653 * config/ia64/nm-linux.h (PREPARE_TO_PROCEED, GET_THREAD_SIGNALS,
4654 ATTACH_LWP): Define to use the following lin-lwp.c functions...
4655 (lin_lwp_prepare_to_proceed, lin_thread_get_thread_signals,
4656 lin_lwp_attach_lwp): Declare.
4660 * mips-tdep.c (do_fp_register_row, do_fp_register_row): Fix printf
4665 * solib-aix5.c (solib-svr4.h): Remove include.
4666 (solib_break_names): Delete names which aren't actually
4668 (bkpt_names): Remove.
4669 (aix5_relocate_main_executable, bfd_lookup_symbol): Replace calls
4670 to STREQ() with equivalent calls to strcmp().
4671 (in_svr4_dynsym_resolve_code, enable_break, bfd_lookup_symbol,
4672 aix5_solib_create_inferior_hook): Revise comments.
4673 (enable_break): Remove old ``bkpt_names'' code.
4677 * Makefile.in (SFILES): Add frame.c .
4678 (COMMON_OBS): Add frame.o .
4679 (frame.o): New target.
4681 * frame.c (find_saved_register):
4682 (default_get_saved_register):
4683 (get_saved_register):
4684 (read_relative_register_raw_bytes_for_frame):
4685 (read_relative_register_raw_bytes): Moved to here.
4686 * regcache.c: From here.
4690 * solib-aix5.c: New file.
4694 * solib.c (info_sharedlibrary_command): Don't assume pointers
4695 are the same size of long, call longest_local_hex_string_custom().
4697 * solib-svr4.c (LM_ADDR): LM_ADDR is a signed offset, so
4698 extract_signed_integer() should be called instead of
4703 * MAINTAINERS: Add Martin Hunt to Write After Approval list.
4708 * mips-tdep.c (mips_register_raw_size): If FP_REGISTER_DOUBLE,
4709 then floating point registers are 8 bytes.
4713 * parse.c (write_exp_msymbol): Make the type CORE_ADDR, to
4714 accomodate 64-bit addresses.
4719 * symtab.c (lookup_symbol_aux): Call lookup_symbol_aux, not
4720 lookup_symbol, when trying to find a symbol with a mangled name,
4721 to avoid infinite recursion.
4725 * TODO (5.2): Mention G++ 3.0 ABI. General cleanups.
4729 * arm-tdep.c (check_prologue_cache): Fix off by 1 error.
4730 (save_prologue_cache): Ditto.
4735 * partial-stab.h (switch): Check that pst is not null
4736 before dereferencing it.
4741 * symfile.c (add_symbol_file_command): Always initialize
4742 my_cleanup using a NULL cleanup.
4746 * demangle.c (demangling_style_names): New variable.
4747 (_initialize_demangler): Fill demangling_style_names with the
4748 names of known demangling styles from libiberty_demanglers[]. Use
4749 add_set_enum_cmd instead of add_set_cmd, to get completion on
4750 demangling style names.
4752 * proc-api.c (_initialize_proc_api): Make `procfs-file' use
4753 file-name completion.
4755 * remote-rdi.c (_initialize_remote_rdi): Ditto for `rdilogfile'.
4757 * solib.c (_initialize_solib): Ditto for `solib-search-path' and
4758 `solib-absolute-prefix'.
4760 * tracepoint.c (_initialize_tracepoint): Ditto for
4763 * win32-nat.c (_initialize_inftarg): Ditto for `dll-symbols'.
4765 * cli/cli-cmds.c (init_cli_cmds): Make `shell' and `make' use
4766 file-name completion.
4768 * infcmd.c (_initialize_infcmd): Make the following commands use
4769 the file-name completer: `tty', `args', `path', `paths', and
4774 * go32-nat.c: Include i387-nat.h.
4775 (fetch_register): New function, uses some of the guts of
4776 go32_fetch_registers and calls i387_supply_register.
4777 (go32_fetch_registers): Most of the code moved into
4778 fetch_register. Use i387_supply_fsave.
4779 (store_register): Use i387_fill_fsave instead of custom code.
4780 (go32_store_registers): Use i387_fill_fsave.
4782 * Makefile.in (go32-nat.o): Depend on i387-nat.h.
4784 * config/i386/go32.mh (NATDEPFILES): Add i387-nat.o.
4786 * completer.c (gdb_completer_file_name_break_characters): Remove
4787 slash from file-name break characters.
4788 [__MSDOS__]: Special definition for DOS/Windows file names.
4789 (line_completion_function): When completing on file names, bump
4790 `p' to the first file-name constituent character of `word', before
4791 invoking the completer.
4795 * i387-nat.c: Include "i387-nat.h". Use regnum instead of regno
4796 consistently for parameter names. Fix comments accordingly.
4797 (i387_supply_register): New function.
4798 (i387_supply_fsave): Implement using i387_supply_register.
4799 * i387-nat.h: Use regnum instead of regno consistently for
4800 parameter names. Fix comments accordingly.
4801 (i387_supply_register): New prototype.
4805 * remote.c (build_remote_gdbarch_data): Use new TARGET_ADDR_BIT
4806 instead of TARGET_PTR_BIT (to support Harvard architectures).
4811 * hpux-thread.c (hpux_thread_xfer_memory): Add mem_attrib
4812 argument to parameter list and to call in order to conform to
4813 to_xfer_memory field of struct target_ops.
4817 * somsolib.c (som_solib_add_solib_objfile): Do not use
4818 section relocation feature of syms_from_objfile. Do my own
4819 section relocation, offsetting each section of the som by
4820 either text_addr - text_link_addr or data_start.
4824 * TODO (5.1): Move ``Hardware watchpint problems'' out of 5.1.
4828 * MAINTAINERS (paper trail): Update.
4832 * target.h (target_fetch_registers): Fix comment.
4836 * f-exp.y: Include <ctype.h>.
4837 (parse_number): Ensure that ``i'' is always initialized.
4841 * MAINTAINERS: Add myself to paper trail section.
4845 * configure.in (AC_CHECK_HEADERS): Add sys/file.h.
4846 * configure, config.in: Regenerate.
4847 * corelow.c: Include <sys/file.h> if present.
4851 * inflow.c (terminal_ours_1): Initialize ``osigtou''. Only
4852 declare when have SIGTTOU.
4856 * config/djgpp/fnchange.lst: Add entries for gdb/gdbtk/*/ChangeLog-*.
4860 * MAINTAINERS: Update my email address.
4864 * NEWS: Document that "info symbol" works with COFF debug info and
4867 * minsyms.c (lookup_minimal_symbol_by_pc_section): Don't skip
4868 symbols whose SYMBOL_BFD_SECTION is NULL.
4872 Get rid of AIX specific PC_LOAD_SEGMENT, replace with PC_SOLIB.
4873 * xcoffsolib.c (xcoff_solib_address): Renamed from
4874 pc_load_segment_name. Return NULL if address is not in a shared
4875 library. Cleanup shared library name construction, using xasprintf.
4876 Format shared library member names consistent with format in exec.c.
4877 (solib_info): Format shared library member names consistent with
4879 * config/rs6000/nm-rs6000.h: Replace PC_LOAD_SEGMENT with PC_SOLIB,
4880 using xcoff_solib_address for PC_SOLIB definition.
4881 * stack.c (print_frame): Remove PC_LOAD_SEGMENT code, no longer
4886 * mipsread.c (read_alphacoff_dynamic_symtab): Replace alloca calls
4887 with xmalloc calls and cleanups.
4891 * rs6000-nat.c (child_xfer_memory): Add missing parameter
4892 'struct mem_attrib *' required by 2001-01-23 change.
4896 Updates to "make TAGS":
4897 * Makefile.in (ALLDEPFILES): Remove altos-xdep.c arm-convert.s
4898 arm-xdep.c convex-tdep.c convex-xdep.c pyr-tdep.c pyr-xdep.c
4900 (TAGFILES_NO_SRCDIR): Add $(SUBDIR_CLI_SRCS).
4904 * config/djgpp/fnchange.lst: Remove extraneous "too many dots".
4909 * defs.h (continuation): Remove unused global variable.
4913 * configure.tgt: Remove references to convex, pyramid, altos and
4915 * configure.host: Ditto.
4916 * MAINTAINERS: Ditto.
4919 * tahoe-tdep.c: Delete obsolete file.
4920 * pyr-xdep.c: Ditto.
4921 * pyr-tdep.c: Ditto.
4922 * convex-tdep.c: Ditto.
4923 * convex-xdep.c: Ditto.
4924 * config/tahoe/xm-tahoe.h: Ditto.
4925 * config/tahoe/tm-tahoe.h: Ditto.
4926 * config/tahoe/tahoe.mt: Ditto.
4927 * config/tahoe/tahoe.mh: Ditto.
4928 * config/pyr/xm-pyr.h: Ditto.
4929 * config/pyr/tm-pyr.h: Ditto.
4930 * config/pyr/pyramid.mt: Ditto.
4931 * config/pyr/pyramid.mh: Ditto.
4932 * config/m68k/xm-altos.h: Ditto.
4933 * config/m68k/tm-altos.h: Ditto.
4934 * config/m68k/altos.mt: Ditto.
4935 * config/m68k/altos.mh: Ditto.
4936 * config/convex/xm-convex.h: Ditto.
4937 * config/convex/tm-convex.h: Ditto.
4938 * config/convex/convex.mt: Ditto.
4939 * config/convex/convex.mh: Ditto.
4940 * config/convex/Convex.notes: Ditto.
4941 * config/arm/xm-arm.h: Ditto.
4942 * config/arm/nm-arm.h: Ditto.
4943 * config/arm/arm.mt: Ditto.
4944 * config/arm/arm.mh: Ditto.
4945 * arm-convert.s: Ditto.
4946 * arm-xdep.c: Ditto.
4947 * altos-xdep.c: Ditto.
4951 * defs.h (internal_error, internal_verror): Add __FILE__ and
4953 * utils.c (internal_error, internal_verror): Update.
4955 * v850-tdep.c: Update calls to internal_error.
4961 * symm-nat.c: Ditto.
4962 * sparc-tdep.c: Ditto.
4965 * rs6000-tdep.c: Ditto.
4966 * rs6000-nat.c: Ditto.
4968 * remote-vx.c: Ditto.
4969 * remote-sim.c: Ditto.
4970 * remote-mips.c: Ditto.
4971 * regcache.c: Ditto.
4972 * objfiles.h: Ditto.
4973 * objfiles.c: Ditto.
4974 * mn10300-tdep.c: Ditto.
4975 * mips-tdep.c: Ditto.
4977 * m68k-tdep.c: Ditto.
4979 * language.c: Ditto.
4980 * infptrace.c: Ditto.
4981 * inferior.h: Ditto.
4983 * ia64-tdep.c: Ditto.
4984 * i386-tdep.c: Ditto.
4985 * i386-linux-nat.c: Ditto.
4986 * hppah-nat.c: Ditto.
4987 * go32-nat.c: Ditto.
4991 * event-loop.c: Ditto.
4992 * dwarf2read.c: Ditto.
4994 * d30v-tdep.c: Ditto.
4995 * d10v-tdep.c: Ditto.
4996 * cli/cli-setshow.c: Ditto.
4997 * cli/cli-script.c: Ditto.
4999 * breakpoint.c: Ditto.
5001 * arch-utils.c: Ditto.
5002 * a29k-tdep.c: Ditto.
5003 * gdb_assert.h: Ditto.
5004 * gdbarch.sh: Ditto.
5005 * gdbarch.h, gdbarch.c: Re-generate.
5010 * event-top.h [!STOP_SIGNAL]: #include <signal.h>.
5014 * remote-sim.c (dump_mem): Cleanup printf format argument.
5015 * MAINTAINERS: Update, mn10300-elf now builds.
5019 * event-top.c: Remove duplicate #include <signal.h>.
5023 * sol-thread.c (restore_inferior_pid): Save the PID in a freshly
5025 (save_inferior_pid): Restore the PID from that tempoary
5026 buffer. Delete the buffer.
5027 * utils.c (make_cleanup_close, do_close_cleanup): Ditto for FD.
5031 * MAINTAINERS: Add ``The Obvious Fix Rule''.
5035 * MAINTAINERS: Add Michael Snyder to Solaris/SPARC list.
5039 * gdbarch.sh: Include "gdb_assert.h".
5040 (struct gdbarch): Change ``nr_data'' to unsigned.
5041 (alloc_gdbarch_data, free_gdbarch_data): New functions.
5042 (gdbarch_free): Free the data-pointer vector. Use xfree to delete
5043 architecture vector.
5044 (struct gdbarch_data, struct gdbarch_data_registration): Move init
5045 method to gdbarch_data. Add free method, make index unsigned.
5046 (struct gdbarch_data_registry): Make nr unsigned.
5047 (register_gdbarch_data): Add free parameter. Store in
5049 (init_gdbarch_data): Use set_gdbarch_data.
5050 (set_gdbarch_data): New function.
5052 * gdbarch.h, gdbarch.c: Re-generate.
5056 * ser-unix.c (hardware_print_tty_state) [HAVE_SGTTY]: Call
5057 fprintf_filtered with correct arguments.
5062 * findvar.c: Buffers of size MAX_REGISTER_RAW_SIZE or REGISTER_BYTES
5063 must be allocated dynamically, since these are no longer constants.
5065 * regcache.c: Ditto.
5067 * sol-thread.c: Ditto.
5069 * config/sparc/sun4sol2.mh (MH_CFLAGS): Add -I/usr/include/v9, as a
5070 work-around for a missing Sun header file in solaris for sparc64.
5074 * config/arm/linux.mh (NATDEPFILES): Add proc-service.o,
5075 thread-db.o, lin-lwp.o; remove lin-thread.o, linux-thread.o.
5076 * config/arm/nm-linux.h (PREPARE_TO_PROCEED, ATTACH_LWP,
5077 GET_THREAD_SIGNALS): Define.
5078 * arm-linux-nat.c (fill_gregset): Correct type of argument.
5079 (supply_gregset): Likewise.
5080 (fill_fpregset): Likewise.
5081 (supply_fpregset): Likewise.
5085 * valops.c (value_cast): If casting a scalar to a pointer, do not
5086 issue a message about truncation unless it exceeds the length of
5087 an address, not the length of a pointer. This is because what the
5088 user gives us is an address, not a pointer, and we will ultimately
5089 convert it (via ADDRESS_TO_POINTER) to a pointer, not truncate it
5090 to a pointer. This allows things like "print *(int *)0x01000234"
5091 to work without generating a misleading message on a target having
5092 two byte pointers and four byte addresses.
5096 * win32-nat.c: Change PTR to void * throughout.
5100 * signals.h: Removed.
5101 * event-top.c (#include <signal.h>): Changed from signals.h.
5102 * inflow.c: Likewise.
5103 * mac-xdep.c: Likewise.
5104 * ser-pipe.c: Likewise.
5105 * ser-tcp.c: Likewise.
5106 * standalone.c: Likewise.
5108 * utils.c: Likewise.
5109 * Makefile.in: Removed signals.h from dependencies.
5114 * inferior.h (step_over_calls_kind): Remove trailing comma from
5116 (step_over_calls): Declare as extern rather than global.
5120 * sh-tdep.c: Update copyright.
5121 (sh_extract_return_value): Rewrite.
5122 (sh3e_sh4_extract_return_value): New function.
5123 (sh_gdbarch_init): Initialize gdbarch_extract-return_value to new
5124 version of the function for sh3e and sh4 CPUs.
5128 * hppah-nat.c (child_xfer_memory): Add parameter 'struct mem_attrib *'
5129 to conform with interface change.
5133 * config/djgpp/fnchange.lst: Tweak to make consistent with the
5136 * config/djgpp/djconfig.sh: Use explicit absolute file name when
5139 * ser-go32.c (dos_write) [UART_FIFO_WORKS]: Use outportsb only if
5140 UART_FIFO_WORKS is defined. Otherwise use outportb.
5143 * go32-nat.c (go32_xfer_memory): Make the argument list consistent
5144 with target.h's `to_xfer_memory' member.
5148 * ppc-bdm.c (#include <signal.h>): Removed.
5149 * remote-array.c: Likewise.
5150 * remote-bug.c: Likewise.
5151 * remote-e7000.c: Likewise.
5152 * remote-mips.c: Likewise.
5153 * remote-os9k.c: Likewise.
5154 * remote-st.c: Likewise.
5155 * remote-udi.c: Likewise.
5156 * remote-vx29k.c: Likewise.
5157 * remote-vx68.c: Likewise.
5158 * remote-vx960.c: Likewise.
5159 * remote-vxmips.c: Likewise.
5160 * remote-vxsparc.c: Likewise.
5164 * remote-utils.h (sr_set_device): Changed free() to xfree() where
5165 appropriate. Also changed Copyright to include 2001.
5166 * symtab.h (obstack_chunk_free, SYMBOL_INIT_DEMANGLED_NAME): Likewise.
5167 * value.h (value_free): Likewise.
5168 * gdbarch.sh (gdbarch_free): Likewise.
5169 * gdbarch.c, gdbarch.h: Regenerated.
5173 * cli/cli-cmds.c (apropos_command): Changed occurance of free() to
5174 xfree(). Also changed Copyright to include 2001.
5178 * monitor.c (#include "gdb_wait.h"): Removed.
5180 * ppc-bdm.c: Likewise.
5181 * remote-adapt.c: Likewise.
5182 * remote-array.c: Likewise.
5183 * remote-bug.c: Likewise.
5184 * remote-e7000.c: Likewise.
5185 * remote-eb.c: Likewise.
5186 * remote-es.c: Likewise.
5187 * remote-mips.c: Likewise.
5188 * remote-mm.c: Likewise.
5189 * remote-nindy.c: Likewise.
5190 * remote-os9k.c: Likewise.
5191 * remote-rdi.c: Likewise.
5192 * remote-rdp.c: Likewise.
5193 * remote-sds.c: Likewise.
5194 * remote-sim.c: Likewise.
5195 * remote-st.c: Likewise.
5196 * remote-udi.c: Likewise.
5197 * remote-vx.c: Likewise.
5198 * remote-vx29k.c: Likewise.
5199 * remote-vx68.c: Likewise.
5200 * remote-vx960.c: Likewise.
5201 * remote-vxmips.c: Likewise.
5202 * remote-vxsparc.c: Likewise.
5203 * remote.c: Likewise.
5204 * ser-pipe.c: Likewise.
5205 * ser-unix.c: Likewise.
5206 * Makefile.in: Updated dependencies.
5210 * event-loop.c: Change inclusion of string.h to gdb_string.h and
5211 updated the copyright notice.
5212 * ser-pipe.c: Ditto.
5213 * mi/mi-cmds.c: Ditto.
5214 * mi/mi-console.c: Ditto.
5215 * mi/mi-getopt.c: Ditto.
5216 * mi/mi-parse.c: Ditto.
5220 * MAINTAINERS: Add David Smith to Write After Approval list.
5224 * cli/cli-utils.c (putchar_filtered): Move function from here.
5225 * utils.c (putchar_filtered): To here.
5226 * cli/cli-utils.h (putchar_filtered): Move declaration from here.
5227 * defs.h (putchar_filtered): To here.
5231 * configure.in (AC_CHECK_FUNCS): Replace vfork test with
5232 AC_FUNC_VFORK macro.
5233 * config.in, configure: Re-generate.
5235 * gdb_vfork.h: New file.
5236 * ser-pipe.c (pipe_open): Update. Include "gdb_vfork.h".
5237 * fork-child.c (fork_inferior): Ditto.
5241 * defs.h (strsave): Delete declaration.
5242 * utils.c (strsave): Delete definition.
5243 * TODO (strsave): Update
5245 * mac-xdep.c (tilde_expand): Replace strsave with xstrdup.
5246 * sparcl-tdep.c (sparclite_open): Ditto.
5247 * mips-tdep.c (mips_set_processor_type_command): Ditto.
5248 (_initialize_mips_tdep): Ditto.
5249 * solib.c (solib_open): Ditto.
5250 * symfile.c (add_filename_language): Ditto.
5251 (set_ext_lang_command): Ditto.
5252 * source.c (init_source_path): Ditto.
5254 * sh3-rom.c (sh3_open): Ditto.
5256 * serial.c (serial_open): Ditto.
5257 * remote-mips.c (common_open): Ditto.
5258 * monitor.c (monitor_open): Ditto.
5259 * m32r-rom.c (m32r_upload_command): Ditto.
5260 * infcmd.c (path_command): Ditto.
5261 * f-exp.y (parse_number): Ditto.
5262 * breakpoint.c (create_longjmp_breakpoint): Ditto.
5263 (create_thread_event_breakpoint): Ditto.
5264 * arc-tdep.c (arc_set_cpu_type_command): Ditto.
5265 (_initialize_arc_tdep): Ditto.
5267 Tue Jan 30 15:14:26 2001 Andrew Cagney <cagney@skil>
5269 * cli/cli-script.c (define_command): Check for a bad hook value in
5274 * configure/sh/embed.mt: New file.
5275 * configure/sh/linux.mt: New file.
5276 * configure/sh/sh.mt: Removed.
5277 * configure.tgt (sh-*-hms,sh-*-coff*,sh-*-elf*,sh-*-linux): New targets.
5282 * symtab.c (block_lookup_symbol): Use 'namespace' parameter in
5283 symbol comparisons in binary search.
5287 * win32-nat.c (child_xfer_memory): Add missing argument required by
5292 * ui-out.c (do_list_end): New function.
5293 (make_cleanup_ui_out_list_end): New function.
5294 * ui-out.h: Provide prototype for make_cleanup_ui_out_list_end.
5295 * stack.c (print_frame) [UI_OUT]: Call
5296 make_cleanup_ui_out_list_end to make sure we mark the end of the
5297 list if we do a non-local exit. At the end of the function,
5298 instead of calling ui_out_list_end directly, let do_cleanups
5303 Fix double parsing of filenames passed as command line arguments
5304 to GDB (causes weird handling of escape characters).
5305 Also, remove dependencies on the CLI from libgdb.
5306 * call-cmds.h: Remove declaration of exec_file_command().
5307 * gdbcore.h: Remove declaration of exec_file_command().
5308 Add declarations for exec_open() and exec_file_clear().
5309 * symfile.h: Add declarations for symbol_file_add_main() and
5310 symbol_file_clear().
5311 * exec.c (exec_open): New function. Implements to_open for exec
5313 (exec_file_clear): New function. Makes GDB forget about a previously
5314 specified executable file.
5315 (exec_file_attach): Move parsing of arguments from here ...
5316 (exec_file_command): ... to here.
5317 (init_exec_ops): Use exec_open(), not exec_file_command() to
5318 implement to_open for exec targets.
5319 * symfile.c (symbol_file_add_main): New function. Call symbol_file_add()
5320 with default values. Used when the file name has already been parsed.
5321 (symbol_file_clear): New function. Makes GDB forget about previously
5323 (symbol_file_command): Call the above function instead of inline code.
5324 * main.c: Include "symfile.h" and "gdbcore.h" instead of the deprecated
5326 (captured_main): Call exec_file_attach() and symbol_file_add_main()
5327 instead of exec_file_command() and symbol_file_command().
5328 (captured_main): Add comment.
5329 * corefile.c: Include "symfile.h".
5330 (core_file_command): Call symbol_file_add_main() instead of
5331 symbol_file_command().
5332 (reopen_exec_file): Call exec_open() instead of exec_file_command().
5333 * infcmd.c: Include "symfile.h".
5334 (attach_command): Call symbol_file_add_main() instead of
5335 symbol_file_command().
5336 * infrun.c: Remove comment about the inclusion of "symfile.h",
5337 not any longer appropriate.
5338 (follow_exec): Call symbol_file_add_main() instead of
5339 symbol_file_command().
5340 * remote-es.c: Include "symfile.h".
5341 (es1800_load): Call symbol_file_add_main() instead of
5342 symbol_file_command().
5343 * remote-vx.c: Remove comment about the inclusion of "symfile.h",
5344 not any longer appropriate.
5345 (vx-wait): Call symbol_file_add_main() instead of
5346 symbol_file_command().
5347 * solib-svr4.c (open_symbol_file_object): Call symbol_file_add_main()
5348 instead of symbol_file_command().
5349 * v850ice.c (ice_file): Call exec_open(), exec_file_attach() and
5350 symbol_file_add_main() instead of exec_file_command() and
5351 symbol_file_command().
5352 * Makefile.in: Update dependencies.
5356 * remote-udi.c (udi_open): Change strdup to xstrdup.
5357 * thread.c (thread_apply_all_command): Change strdup to xstrdup.
5358 Update copyright message.
5359 * varobj.c (delete_variable_1): Likewise.
5361 * gdb_string.h: Remove declaration of strdup. Update copyright
5363 * config/xm-mpw.h: Likewise.
5364 * config/i386/xm-i386mach.h: Likewise.
5365 * config/m68k/xm-apollo68b.h: Likewise.
5366 * config/m68k/xm-hp300bsd.h: Likewise.
5367 * config/rs6000/xm-rs6000.h: Likewise.
5368 * config/vax/xm-vaxult.h: Remove declaration of strdup.
5369 * config/vax/xm-vaxult2.h: Likewise.
5373 * MAINTAINERS: Add Jeff Holcomb to Write After Approval list.
5377 * target.c (target_xfer_memory_partial): Return -1 on failure due
5378 to invalid access mode attribute.
5382 * win32-nat.c (_initialize_core_win32): Prototype correctly.
5386 * config/alpha/tm-fbsd.h: Update copyright.
5387 (USE_STRUCT_CONVENTION): Define in terms of
5388 alphabsd_use_struct_convention.
5389 * config/alpha/fbsd.mt (TDEPFILES): Add alphafbsd-tdep.c.
5390 * alphafbsd-tdep.c: New file.
5394 * top.c (print_gdb_version): Update Copyright year.
5398 * dcache.c (dcache_write_line): Fix typo.
5400 * memattr.c (delete_mem_region): Replace free() with xfree().
5401 (mem_number): Add explicit type.
5403 * sol-thread.c (sol_thread_xfer_memory): Add attrib argument.
5404 (rw_common): Likewise.
5408 * infcmd.c (get_inferior_args, set_inferior_args): Accessor functions
5409 for the inferior program arguments.
5410 (run_command, run_no_args_command, init_infcmd)): Use accessor
5411 functions to set the inferior program arguments.
5412 * inferior.h: Add definitions to the accessor functions above.
5416 * dwarf2read.c (read_tag_const_type, read_tag_volatile_type):
5417 Implement these correctly, using make_cv_type.
5421 * exec.c (xfer_memory): Add attrib argument.
5422 * infptrace.c (child_xfer_memory): Likewise.
5423 * lin-lwp.c (lin_lwp_xfer_memory): Likewise.
5424 * monitor.c (monitor_xfer_memory): Likewise.
5425 * remote-adapt.c (adapt_xfer_inferior_memory): Likewise.
5426 * remote-array.c (array_xfer_memory): Likewise.
5427 * remote-bug.c (bug_xfer_memory): Likewise.
5428 * remote-e7000.c (e7000_xfer_inferior_memory): Likewise.
5429 * remote-eb.c (eb_xfer_inferior_memory): Likewise.
5430 * remote-es.c (es1800_xfer_inferior_memory): Likewise.
5431 * remote-mips.c (mips_xfer_memory): Likewise.
5432 * remote-mm.c (mm_xfer_inferior_memory): Likewise.
5433 * remote-nindy.c (nindy_xfer_inferior_memory): Likewise.
5434 * remote-os9k.c (rombug_xfer_inferior_memory): Likewise.
5435 * remote-rdi.c (arm_rdi_xfer_memory): Likewise.
5436 * remote-rdp.c (remote_rdp_xfer_inferior_memory): Likewise.
5437 * remote-sds.c (sds_xfer_memory): Likewise.
5438 * remote-sim.c (gdbsim_xfer_inferior_memory): Likewise.
5439 * remote-st.c (st2000_xfer_inferior_memory): Likewise.
5440 * remote-udi.c (udi_xfer_inferior_memory): Likewise.
5441 * remote-vx.c (vx_xfer_memory): Likewise.
5442 * remote.c (remote_xfer_memory): Likewise.
5443 * target.c (debug_to_xfer_memory, do_xfer_memory): Likewise.
5444 * target.h (child_xfer_memory, do_xfer_memory, xfer_memory): Likewise.
5445 * thread-db.c (thread_db_xfer_memory): Likewise.
5447 * target.h (#include "memattr.h"): Added.
5448 (target_ops.to_xfer_memory): Add attrib argument.
5450 * wince.c (_initialize_inftarg): Removed call to set_dcache_state.
5451 * dcache.h (set_dcache_state): Removed declaration.
5452 * dcache.c (set_dcache_state): Removed definition
5454 * dcache.c: Update module comment, as dcache is now enabled and
5455 disabled with memory region attributes instead of by the global
5456 variable "remotecache". Add comment describing the interaction
5457 between dcache and memory region attributes.
5458 (dcache_xfer_memory): Add comment describing benefits of moving
5459 cache writeback to a higher level.
5460 (dcache_struct): Removed cache_has_stuff field. This was used to
5461 record whether the cache had been accessed in order to invalidate
5462 it when it was disabled. However, this is not needed because the
5463 cache is write through and the code that enables, disables, and
5464 deletes memory regions invalidate the cache. Add comment which
5465 suggests that we could be more selective and only invalidate those
5466 cache lines containing data from those memory regions.
5467 (dcache_invalidate): Updated.
5468 (dcache_xfer_memory): Updated.
5470 (dcache_alloc): Don't abort() if dcache_enabled_p is clear.
5471 (dcache_xfer_memory): Removed code that called do_xfer_memory() to
5472 perform a uncached transfer if dcache_enabled_p was clear. This
5473 function is now only called if caching is enabled for the memory
5475 (dcache_info): Always print cache info.
5477 * target.c (do_xfer_memory): Add attrib argument.
5478 (target_xfer_memory, target_xfer_memory_partial): Break transfer
5479 into chunks defined by memory regions, pass region attributes to
5481 * dcache.c (dcache_read_line, dcache_write_line): Likewise.
5483 * Makefile.in (SFILES): Add memattr.c.
5484 (COMMON_OBS): Add memattr.o.
5485 (dcache.o): Add target.h to dependencies.
5486 * memattr.c: New file.
5487 * memattr.h: Likewise.
5489 * config/m32r/m32r.mt (GDBSERVER_LIBS): Added ../../intl/libintl.a.
5490 * config/mips/vr5000.mt (GDBSERVER_LIBS): Likewise.
5491 * config/tic80/tic80.mt (GDBSERVER_LIBS): Likewise.
5492 * gdbserver/low-sim.c (#include "defs.h"): Removed.
5493 (mygeneric_load): Rename from generic_load.
5495 * gdbserver/low-hppabsd.c (#include "server.h"): Added.
5496 (#include "defs.h"): Removed.
5497 (inferior_pid, perror_with_name): Remove declarations.
5498 * gdbserver/low-linux.c: Likewise.
5499 * gdbserver/low-nbsd.c: Likewise.
5500 * gdbserver/low-sparc.c: Likewise.
5501 * gdbserver/low-sun3.c: Likewise.
5503 * i386-stub.c: Re-indent.
5504 * m68k-stub.c: Re-indent.
5508 * gdbarch.sh (PARM_BOUNDARY): Define.
5509 * gdbarch.c: Regenerate.
5510 * gdbarch.h: Regenerate.
5514 * ns32k-tdep.c: #include "frame.h"
5515 * config/ns32k/tm-umax.h (FRAME_FIND_SAVED_REGS): Restore. It
5516 appears to have been inadvertantly removed sometime in May 1999.
5518 * Revert 2000-11-09 changes where shared library objects were
5519 moved from NATDEPFILES to TDEPFILES on NetBSD targets. While
5520 we'd like to be able to debug dynamically linked executables,
5521 this makes it impossible to build a cross debugger on a many
5524 * config/i386/nbsd.mt: Remove solib.o, solib-svr4.o from TDEPFILES.
5525 * config/i386/nbsdelf.mt: Likewise.
5526 * config/m68k/nbsd.mt: Likewise.
5527 * config/ns32k/nbsd.mt: Likewise.
5528 * config/powerpc/nbsd.mt: Likewise.
5529 * config/sparc/nbsd.mt: Likewise.
5530 * config/sparc/nbsdelf.mt: Likewise.
5531 * config/i386/nbsd.mh: Add solib.o, solib-svr4.o to NATDEPFILES.
5532 * config/i386/nbsdelf.mh: Likewise.
5533 * config/m68k/nbsd.mh: Likewise.
5534 * config/ns32k/nbsd.mh: Likewise.
5535 * config/powerpc/nbsd.mh: Likewise.
5536 * config/sparc/nbsd.mh: Likewise.
5540 * dbxread.c (read_ofile_symtab): Stay with AUTO_DEMANGLING for G++.
5541 (process_one_symbol): Likewise.
5542 * dwarfread.c (handle_producer): Likewise.
5546 * configure.in (build_warnings): Disable -Wuninitialized until GDB
5547 compiles with -Wuninitialized,-Werror.
5548 * configure: Regenerate.
5550 * MAINTAINERS: Add list of buildable targets.
5554 * defs.h (STRCMP): Delete macro.
5556 * objfiles.c (objfile_relocate): Replace STRCMP with call to
5558 * symtab.c (lookup_partial_symbol, lookup_block_symbol): Ditto.
5559 * symfile.c (compare_symbols): Ditto.
5560 * standalone.c (open): Ditto.
5561 * remote-es.c (verify_break): Ditto.
5562 * cli/cli-decode.c (add_cmd, add_show_from_set): Ditto.
5564 * symfile.c (compare_psymbols): Delete comment refering to STRCMP.
5568 * varobj.c (FREEIF): Delete macro.
5569 (varobj_set_value, free_variable): Replace FREEIF with ``xfree''
5574 * arc-tdep.c (arc_cpu_type_table): Add new arc core numbers.
5575 (arc_print_insn): No bfd available, so pass NULL to
5576 arc_get_disassembler.
5580 * symtab.c (lookup_symbol_aux): Call lookup_symbol_aux to lookup
5581 a mangled symbol rather than recursing into lookup_symbol, since
5582 this will just re-unmangle the name & call lookup_symbol_aux -
5583 leading to an infinite recursion.
5587 * infcmd.c (print_return_value): Restore another space lost by
5588 switch to UIOUT. ``$NN='' should be ``$NN =''.
5592 * target.h (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT)
5593 * breakpoint.c (TARGET_REGION_OK_FOR_HW_WATCHPOINT): Wrap macro
5594 definition in parenthesis.
5599 * remote.c (remote_remove_hw_breakpoint): Add 'len' field to Z
5601 (remote_insert_hw_breakpoint): Ditto.
5605 * config/m68k/tm-nbsd.h (USE_STRUCT_CONVENTION): Define.
5606 (BPT_VECTOR, REMOTE_BPT_VECTOR): Change to 0xf.
5607 * config/m68k/nbsd.mt (TDEPFILES): Add m68knbsd-tdep.o.
5608 * m68knbsd-tdep.c: New file.
5610 * i386nbsd-tdep.c: Remove #if 0'd out #includes.
5612 * m68knbsd-nat.c: #include gdbcore.h.
5616 * MAINTAINERS: Add J.T. Conklin to Blanket Write Privs.
5620 * procfs.c (procfs_stopped_by_watchpoint): Don't die if process
5621 goes away -- just return false (ie. not stopped by watchpoint).
5622 * source.c (openp): Fix typo in comment.
5626 * blockframe.c (generic_get_saved_register): Spelling fix.
5627 * frame.h (FRAME_FP): Spelling fix.
5631 * infcmd.c (print_return_value): Restore space lost by switch to
5632 UIOUT. ``$NN='' should be ``$NN =''.
5636 * regcache.c (set_register_cached, register_buffer,
5637 real_register, pseudo_register fetch_register, store_register):
5639 (register_changed, read_relative_register_raw_bytes_for_frame,
5640 registers_changed, registers_fetched, read_register_bytes,
5641 read_register_gen, write_register_gen, read_register,
5642 read_signed_register, write_register, supply_register): Replace
5643 register_valid[] with register_cached() and
5644 set_register_cached().
5645 (read_register_bytes, read_register_gen, write_register_gen,
5646 read_register, read_signed_register, write_register,
5647 supply_register): Replace registers[] with register_buffer().
5648 (read_register_bytes, read_register_gen, read_register,
5649 read_signed_register): Call fetch_register().
5650 (write_register_gen, write_register): Call real_register() and
5652 (write_register_bytes): Call store_register().
5653 * value.h (set_register_cached, register_buffer): Prototype.
5654 * remote.c (remote_fetch_registers): Allocate regs[] with a
5655 run-time size. Replace register_valid[] with
5656 set_register_cached().
5657 (store_register_using_P, remote_store_registers): Replace
5658 registers[] with register_buffer().
5662 * regcache.c: Change "write-back" comment to "write-through".
5663 Change "regno" to "regnum".
5664 (read_register, read_signed_register): Remove "raw" from return
5666 (supply_register): Spelling fix.
5667 * value.h: Change "regno" to "regnum".
5671 * Makefile.in (install-gdbtk): Add .itcl files to the list of files
5676 * mips-tdep.c (mips_coerce_float_to_double): Fix typo in comment.
5680 * valops.c (VALUE_SUBSTRING_START): Delete.
5684 * Makefile.in (SUBDIR_CLI_OBS): Add cli/cli-utils.o.
5685 (SUBDIR_CLI_SRCS): Add cli/cli-utils.c.
5686 (cli_utils_h): New variable.
5687 (cli/cli-utils.o): New rule.
5688 * cli/cli-utils.c: New file.
5689 * cli/cli-utils.h: New file.
5693 * config/i386/tm-i386.h (REGISTER_CONVERT_TO_VIRTUAL,
5694 REGISTER_CONVERT_TO_RAW): Delete trailing semicolon.
5698 * alphabsd-nat.c, i386-linux-nat.c, i386bsd-nat.c: Fix typo in
5703 * sh-tdep.c (sh_default_store_return_value): Allow for small return type.
5704 (sh3e_sh4_store_return_value): Call sh_default_store_return_value for
5706 * sparc-tdep.c (sparc_frame_chain): Fix typo in comment.
5707 Update copyright notice.
5709 For older changes see ChangeLog-2000
5715 version-control: never
projects / binutils.git / blob