3 * Makefile.in: Regenerate.
4 * configure: Regenerate.
6 * Makefile.def (bootstrap-stage): Rename extra_*_flags to
8 * Makefile.tpl (configure-[+module+], all-[+module+]): Exit
9 for bootstrapped modules if toplevel bootstrap is going.
10 (GCC bootstrap): Generate per-stage targets for all bootstrapped
11 modules. Adjust for changes in Makefile.def. Enable several
12 rules even in non-bootstrap mode, just to avoid peppering the
13 template with unnecessary "@if/@endif gcc-bootstrap" pairs.
14 (stage-[+prev+]-bubble): Remove.
16 * Makefile.def (Dependencies): Depend on all-build-bison,
17 all-build-flex, all-build-byacc, all-build-texinfo, rather
18 than the host variations.
19 * Makefile.tpl (BUILD_DIR_PREFIX): Remove. Replace throughout
21 (BISON): Update for recent Bisons.
23 (cross): Depend on all-build.
24 (all): Do not depend on all-build.
25 (prebootstrap): Remove.
26 (dep-kind): Accept separate prefixes for MODULE and ON variables.
27 (Prebootstrap dependencies): Add them to the per-stage targets
28 and to all-prebootstrap.
29 * configure.in (build_configdirs): Always enable build_tools.
30 (BUILD_DIR_PREFIX): Remove.
32 * Makefile.def (gcc): Add target variable.
33 (gdb, expect, guile, tk, tix): Replace with_x with extra_make_flags.
34 * Makefile.tpl (Autogenerated `all-*' targets): Invoke $(TARGET-*)
35 in the recursive `make', instead of hardwiring `all'.
36 (Autogenerated TARGET-* variables): New.
40 * configure.in: In noconfigdirs check, match GNU/k*BSD with GNU/Linux
42 * configure: Regenerate.
46 * Makefile.def, configure.in, src-release: Remove useless, bogus
48 * Makefile.in, configure: Regenerate.
50 * src-release: Stop distributing mmalloc with gdb (which doesn't
52 * Makefile.def: GDB doesn't depend on mmalloc anymore.
53 * Makefile.in: Regenerate.
57 * configure.in (arm*-*-eabi*): New target.
58 * configure: Regenerate.
62 * configure.in: Turn mt-linux into mt-gnu. Use mt-gnu and enable
63 libmudflap for all GNU-based systems (with Glibc).
64 * configure: Regenerate.
68 * Makefile.def (bfd, opcodes, gcc, zlib): Mark as bootstrap module.
69 (bison, byacc, flex, texinfo): Do not mark as bootstrap module.
70 (Dependencies): New section.
71 * Makefile.tpl (Dependencies): Generate from Makefile.def.
72 (configure-target-[+module+]): Depend on maybe-all-gcc
73 (all-prebootstrap): New name of all-bootstrap. Changed throughout.
74 (toplevel profiledbootstrap): Fix dependencies.
75 * Makefile.in: Regenerate.
79 * configure.in (arm*-*-symbianelf*): Add ${libgcj} and
80 target-libiberty to noconfigdirs.
84 * configure.in: Check for MPFR as well as GMP.
85 * configure: Regenerate.
89 * Makefile.def (host-modules): Add gcc.
90 * Makefile.in: Regenerate.
91 * Makefile.tpl (sorry): New rule.
92 (configure-host, all-host, [+make_target+]-host, do-check,
93 install-host): Do not add gcc as a special case.
94 (host modules): Add a small special-casing for gcc. Export
95 extra_make_flags through the environment.
96 (maybe-configure-gcc, configure-gcc, maybe-all-gcc, all-gcc,
97 maybe-check-gcc, check-gcc, maybe-install-gcc, install-gcc,
98 other recursive targets for gcc): Remove.
100 (all, do-[+make_target+], do-check): Wrap between unstage and stage.
101 (stage, unstage): New rules.
102 (stage[+id+]-start, stage[+id+]-end, [+compare-target+],
103 distclean-stage[+id+]): Use stage_current.
104 ([+bootstrap-target+], profiledbootstrap): Do not invoke manually
105 the stage*-start rules.
113 Add patches from libtool CVS.
114 * libtool.m4: Add kfreebsd*-gnu and knetbsd*-gnu.
115 * ltconfig: Likewise.
116 * ltcf-c.sh: Likewise.
117 * ltcf-cxx.sh: Likewise.
118 * ltcf-gcj.sh: Likewise.
122 * configure.in: Add noconfigdirs for crx-*-*.
123 * configure: Regenerate.
131 * configure.in: Build libmudflap by default on FreeBSD.
132 * configure: Regenerated.
136 * configure.in: Do not build libmudflap by default on non-GNU/Linux
138 * configure: Regenerated.
143 * Makefile.tpl (profiledbootstrap): Build runtime libraries with
144 feedback based compiler.
145 * Makefile.in: Rebuilt.
149 * configure.in: Do not prepend $srcdir to /dev/null in
151 * configure: Regenerate.
155 * Makefile.def (host_modules): Set bootstrap=true for flex.
156 * Makefile.tpl (all-gcc): Depend on texinfo and flex.
157 * Makefile.in: Rebuilt.
161 * Makefile.def (build_modules): Add bison, byacc, flex,
163 (flags_to_pass): Add FLEX.
164 * Makefile.tpl (BUILD_DIR_PREFIX, BASE_EXPORTS): New.
165 (BUILD_EXPORTS, HOST_EXPORTS, BASE_TARGET_EXPORTS): Include it.
166 (DEFAULT_YACC, USUAL_YACC, DEFAULT_LEX, USUAL_LEX, DEFAULT_M4,
167 DEFAULT_MAKEINFO): Remove.
168 (CONFIGURED_YACC, CONFIGURED_FLEX, CONFIGURED_BISON,
169 CONFIGURED_LEX, CONFIGURED_M4, CONFIGURED_MAKEINFO): Substitute.
170 (YACC, FLEX, BISON, LEX, M4, MAKEINFO): Define to look into
171 objdir or else use configured tool.
174 (Build module dependencies): Add.
175 * Makefile.in: Regenerate.
176 * configure.in: Better support for multiple build modules,
177 matching what is done for host/target modules. Do not look
178 for "plausible" locations of build tools if Canadian cross.
179 Use autoconf's AC_PROG_CC to find a C compiler. Define
180 BUILD_DIR_PREFIX. Look for flex, makeinfo and m4.
181 * configure: Regenerate.
185 * Makefile.tpl (HOST_EXPORTS): Fix pasto.
186 * Makefile.in: Regenerate.
190 * Makefile.tpl (configure-build-[+module+],
191 configure-[+module+], configure-target-[+module+]): Pass
192 [+extra_configure_args+].
193 (all-build-[+module+], all-[+module+], check-[+module+],
194 install-[+module+], [+make_target+]-[+module+],
195 all-target-[+module+], check-target-[+module+],
196 install-target-[+module+], [+make_target+]-target-[+module+]):
197 Pass [+extra_make_args+].
198 (HOST_EXPORTS): Include the former GCC_HOST_EXPORTS.
199 (GCC_HOST_EXPORTS): Remove.
200 (configure-gcc, all-gcc, GCC_STRAP_TARGETS, profiledbootstrap,
201 cross, check-gcc, check-gcc-c++, install-gcc,
202 gcc-no-fixedincludes, [+make_target+]-gcc, stage[+id+]-bubble):
203 Replace GCC_HOST_EXPORTS with HOST_EXPORTS.
204 * Makefile.in: Regenerate.
208 * configure.in: Check for srcdir/winsup rather than build directory
210 * configure: Regenerate.
214 * configure.in: Don't build Cygwin native newlib if winsup
215 directory is missing. Emit warning instead.
216 * configure: Regenerate.
220 * Makefile.tpl (touch-stage[+id+]): New.
221 (restage[+prev+]): Depend on touch-stage[+id+].
223 * Makefile.tpl (RECURSE_FLAGS_TO_PASS): New.
226 * Makefile.def: Add profile and feedback bootstrap stages.
227 Remove next field from bootstrap stages.
228 * Makefile.tpl (LN, LN_S): Substitute.
229 (stageN-start, stageN-end): Use double-colon rules, to
230 provide a hook for additional setup commands.
231 (distclean-stageN-gcc, restageN): Create dependencies from
232 [+prev+], not from [+next+].
233 (stageN-bubble): Add commands for successive stages from
234 [+prev+], using double-colon rules.
235 (all-stageN-gcc): Fix typo.
236 (stagefeedback-start, profiledbootstrap): New.
237 * Makefile.in: Regenerate.
238 * configure.in: Call ACX_PROG_LN.
239 * configure: Regenerate.
243 * configure.in: Fix --enable-bootstrap breakage introduced in trees
245 * configure: Regenerate.
249 * Makefile.tpl: Fix typo.
250 * Makefile.in: Regenerate.
254 * configure.in: Remove new- prefix from toplevel
256 * configure: Regenerate.
260 Merge this patch from the gcc tree:
265 * config-ml.in: Pass FFLAGS and ADAFLAGS for multilibs, handle F77
270 * Makefile.tpl (all.normal): Rename to all.
271 (all): Replace with a rule to pick the default
272 target from configure.
273 (all-gcc, configure-gcc): Use conditionals to
274 do nothing when toplevel bootstrap is going on.
275 (GCC directory bootstrap) [gcc-bootstrap]: Disable.
276 (Toplevel bootstrap) [gcc-no-bootstrap]: Disable.
277 * configure.in: Support --enable-bootstrap.
279 * Makefile.def: Remove new- prefix from toplevel
281 * Makefile.tpl: Likewise.
283 * Makefile.def: Add bootstrap_stage 4. Add bootstrap2
286 * Makefile.tpl (Toplevel bootstrap): Pass $(BASE_FLAGS_TO_PASS)
287 $(RECURSE_FLAGS) to recursive invocation of make.
289 * Makefile.in: Regenerate.
290 * configure: Regenerate.
294 * configure.in: Fix sed invocation for GFORTRAN_FOR_TARGET.
295 * configure: Regenerate.
299 * Makefile.tpl (BUILD_EXPORTS, HOST_EXPORTS, GCC_HOST_EXPORTS)
300 (STAGE_HOST_EXPORTS, BASE_TARGET_EXPORTS, RAW_CXX_TARGET_EXPORTS)
301 (NORMAL_TARGET_EXPORTS): New macros. Use them in all the recursive
303 * Makefile.in: Regenerate.
307 * configure.in: Test the ability to symlink directories.
308 * configure: Regenerate.
310 * Makefile.def (bootstrap-stage): New definitions.
311 * Makefile.tpl (configure-stage1-gcc,
312 configure-stage2-gcc, configure-stage3-gcc,
313 all-stage1-gcc, all-stage2-gcc, all-stage3-gcc,
314 new-bootstrap, new-cleanstrap, new-restage1, new-restage2,
315 new-restage3, compare): Autogenerate, see Makefile.in
316 entry for behavioral changes.
317 (distclean-stage1, new-stage1-start, new-stage1-end,
318 new-stage1-bubble, distclean-stage2, new-stage2-start,
319 new-stage2-end, new-stage2-bubble, distclean-stage3,
320 new-stage3-start, new-stage3-end): New autogenerated targets.
321 (objext, prebootstrap, BOOT_CFLAGS,
322 POSTSTAGE1_FLAGS_TO_PASS): Move above the autogenerated
325 * Makefile.in: Regenerate.
326 (distclean-stage1, new-stage1-start, new-stage1-end,
327 new-stage1-bubble, distclean-stage2, new-stage2-start,
328 new-stage2-end, new-stage2-bubble, distclean-stage3,
329 new-stage3-start, new-stage3-end): New targets.
330 (all-stage1-gcc): Move prebootstrap dependency from here...
331 (configure-stage1-gcc): ...to here.
332 (new-bootstrap): Use bubble targets.
333 (new-cleanstrap, new-restage1, new-restage2, new-restage3):
334 Use per-stage distclean targets.
335 (configure-stage1-gcc, configure-stage2-gcc,
336 configure-stage3-gcc, all-stage1-gcc,
337 all-stage2-gcc, all-stage3-gcc, new-bootstrap):
338 Use new-stageN-start to prepare the tree.
342 * Makefile.def (host_modules): add libcpp.
343 * Makefile.tpl: Add dependencies on and for libcpp.
344 * Makefile.in: Regenerate.
345 * configure.in: Add libcpp host module.
346 * configure: Regenerate.
350 * Makefile.def, Makefile.tpl, configure.in: Remove all mention
352 * configure, Makefile.in: Regenerate.
356 Merge from tree-ssa-20020619-branch.
358 * Makefile.def: Add libbanshee, libmudflap and libgfortran.
359 * Makefile.tpl (BUILD_CONFIGDIRS): Add libbanshee.
360 (HOST_GMPLIBS): Define.
361 (HOST_GMPINC): Define.
362 (TARGET_LIB_PATH): Add libmudflap.
363 (GFORTRAN_FOR_TARGET): Define.
364 (configure-build*): Export GFORTRAN.
365 (configure-gcc): Export GMPLIBS and GMPINC.
366 (all-gcc): Add maybe-all-libbanshee.
367 (configure-target-libgfortran): Define.
368 * Makefile.in: Regenerate.
369 * configure.in (host_libs): Add libbanshee.
370 (target_libraries): Add target-libmudflap and target-libgfortran.
371 Add --with-libbanshee.
372 Handle --disable-libmudflap.
373 (*-*-freebsd*): Use with_gmp.
374 Add $(libgcj) to noconfigdirs.
375 * configure: Regenerate.
377 * MAINTAINERS: Add tree-ssa maintainers.
381 * config/acx.m4: Fix fastcompare support for new-bootstrap.
382 * configure: Regenerate.
389 * Makefile.def (flags_to_pass): Remove *dir variables that
390 are passed to the modules via TOPLEVEL_CONFIGURE_ARGUMENTS,
391 as well as prefix and exec_prefix.
392 * Makefile.in: Regenerate.
396 * Makefile.def (host_modules): Mark with the bootstrap
397 flag packages on which gcc depends.
398 * Makefile.tpl (all-bootstrap): Use it.
399 * Makefile.in: Regenerate.
403 * Makefile.def (flags_to_pass): Remove *dir variables that
404 are passed to the modules via TOPLEVEL_CONFIGURE_ARGUMENTS,
405 as well as prefix and exec_prefix.
406 * Makefile.in: Regenerate.
410 * configure.in: Invoke ACX_PROG_CMP_IGNORE_INITIAL.
411 * configure: Regenerate.
412 * config/acx.m4: Mutuate ACX_PROG_CMP_IGNORE_INITIAL from gcc.
413 * gcc/Makefile.tpl (compare): Use the result of the test.
414 * gcc/Makefile.in: Regenerate.
418 * Makefile.tpl (all-stage1-gcc, all-stage2-gcc, all-stage3-gcc):
419 Always relocate gcc and prev-gcc to the original names, even
421 (new-cleanstrap, new-restage1, new-restage2, new-restage3):
426 * configure.in (mips*-*-irix5*): Enable ld.
427 * configure: Regenerate.
431 * Makefile.tpl (configure-[+module+], configure-gcc,
432 configure-stage1-gcc, configure-stage2-gcc, configure-stage3-gcc):
433 Set and export LDFLAGS.
434 * Makefile.in: Regenerate.
439 * Makefile.tpl: If we don't have built-in-tree target tools,
440 use the ones found by configure rather than hacking around with
441 program_transform_name.
442 * configure.in: Give Makefile.tpl the information necessary
444 * Makefile.in: Regenerate.
445 * configure: Regenerate.
450 * configure.in: When computing baseargs, strip *all* copies of
451 offending options. Also, don't match/substitute the trailing space,
452 so that this actually works when two similar options are separated by
454 * configure: Regenerate.
458 * configure.in (powerpc-*-aix*): Remove target-libada from noconfigdirs.
459 (rs6000-*-aix*): Same.
460 * configure: Regenerate.
464 Remove MPW support, no longer used.
465 * mpw-README, mpw-build.in, mpw-config.in, mpw-configure,
466 mpw-install: Remove files.
467 * src-release (DEVO_SUPPORT): Remove names of removed files.
468 * MAINTAINERS: Likewise.
472 * Makefile.tpl (top level bootstrap support): Remove now-unneeded
473 STRICT_WARN, WARN_CFLAGS flags passed down to make.
474 * Makefile.in: Regenerate.
476 * configure.in (top level bootstrap support): Rework --enable-werror
477 to set @stage2_werror_flag@.
478 * configure: Regenerate.
479 * Makefile.tpl (top level bootstrap support): Pass
480 @stage2_werror_flag@ down to configure in stages 2 and 3.
481 * Makefile.in: Regenerate.
485 * Makefile.tpl (new-bootstrap): Set CC and CC_FOR_BUILD in configure
486 for stages 2 and 3 as well as in make. As a consequence, remove
487 OUTPUT_OPTION (now detected by configure) from the flags passed down
489 * Makefile.in: Regenerate.
491 * Makefile.tpl (new-bootstrap): Fix typo.
492 * Makefile.in: Regenerate.
496 * Makefile.tpl: Rearrange by moving recursive_targets rules
497 into their proper sections.
498 * Makefile.tpl (top level bootstrap support): Move disabling
499 of coverage flags from 'make' to 'configure'; improve comments.
500 * Makefile.in: Regenerate.
502 * Makefile.tpl (experimental top level bootstrap) Move stage1
503 language setting from all- target to configure- target; disable
504 intermodule optimization in stage 1; prevent gratuitous rebuilds
506 * Makefile.in: Regenerate.
507 * configure.in: Comma-separate stage 1 language list for top
509 * configure: Regenerate.
511 * Makefile.tpl: Clean up experimental top level bootstrap support:
512 note known problems; set CONFIG_SHELL; don't set BUILD_CC; relocate
513 prev-gcc in configure- targets as well as all- targets.
514 * Makefile.in: Regenerate.
518 * configure.in: Remove symbolic link section.
519 * configure: Regenerate.
520 * Makefile.tpl (links): Remove.
521 * Makefile.in: Regenerate.
526 * configure.in (DEFAULT_YACC, DEFAULT_M4, DEFAULT_LEX):
527 Set with AC_CHECK_PROGS.
528 * configure.in: Fix comment typo from last patch.
529 * configure: Regenerate.
533 * Makefile.tpl: Introduce experimental top level bootstrap support.
534 * Makefile.in: Regenerate.
535 * configure.in: Introduce support for top level bootstrap.
536 * configure: Regenerate.
542 * configure.in: Cope with shells that do not support unquoted ^
543 * configure: Regenerate.
549 * configure.in: Cope with shell that do not support nesting
550 quotes inside quoted backquote substitutions.
551 * configure: Regenerate.
556 * configure.in: Fix escaping of $.
557 * configure: Regenerate.
561 * configure: Regenerate.
566 Move language detection to the top level.
567 * configure.in: Find default values for the tools as
568 soon as possible. Disable ada if GNAT is not found.
569 Emit error message about missing languages. Expand
570 --enable-languages=all for the gcc subdirectory.
574 * configure.in (mips64*-*-linux*): Override mips*-*-linux* case
576 * configure: Regenerated.
581 * Makefile.tpl: Guard XFOO sed statements better.
582 * Makefile.tpl: Add dependency for configure-target-libada.
583 * Makefile.in: Regenerate (incidentally fixes broken
584 commit when libada-branch was merged).
588 * src-release (CVS_NAMES): Define.
589 (do-tar, do-tar): Prune $(CVS_NAMES).
593 * texinfo/texinfo.tex: Update from version 2003-02-03.16 to
599 * mkinstalldirs, install-sh: Import from automake CVS HEAD.
603 * config.guess: Update from version 2003-06-12 to 2004-02-16.
604 * config.sub: Update from version 2003-06-13 to 2004-02-16.
608 * configure.in (powerpc-*-aix*): Add target-libada to noconfigdirs.
609 (rs6000-*-aix*): Same.
610 * configure: Regenerate.
614 * configure.in (host): Add in missing $noconfigdirs to defines.
615 * configure: Regenerate.
620 PR ada/6637, PR ada/5911
621 Merge with libada-branch:
622 * configure.in, Makefile.tpl, Makefile.def: Add target-libada,
623 with appropriate dependencies. Add --enable-libada configure switch.
624 * configure, Makefile.in: Regenerate.
628 * configure.in: Don't pass --with-stabs on IRIX 5 either.
629 * configure: Regenerate.
633 * COPYING.NEWLIB: Update Red Hat license to 2004.
637 * Makefile.def (target_modules) [libiberty]: Don't stage.
638 * Makefile.in: Rebuilt.
642 * COPYING.NEWLIB: Update to include copyrights for new
647 * src-release: Update copyright year.
648 (do-proto-toplev): Configure using i686-pc-linux-gnu.
649 (NEWLIB_SUPPORT_DIRS): Delete macro.
650 (newlib.tar.bz2): Delete rule.
654 * Makefile.def (target_modules) [libtermcap, libiberty, zlib]: Stage.
655 * Makefile.tpl (configure-target-[+module+]): Support stage.
656 * Makefile.in: Rebuilt.
660 * gettext.m4: Quote names of macros to be defined by AC_DEFUN
665 * configure.in: Use ./config.cache, not config.cache.
666 * configure: Regenerate.
667 * Makefile.tpl: Special-casing not needed for GCC any more.
668 * Makefile.in: Regenerate.
670 * configure.in: Don't share a cache file for host dirs.
671 * configure: Regenerate.
673 * config-ml.in: Don't mess with the cache file.
677 * Makefile.tpl: Make GCC use a separate config.cache.
678 * Makefile.in: Regenerate.
680 PR bootstrap/11932, PR bootstrap/11933
681 (I don't know if it will fix either of them, but it relates
683 * configure.in: Don't use shared config.cache for target
685 * configure: Regenerate.
689 * configure.in (ia64*-*-hpux*): Disable building java libraries.
690 * configure: Regenerated.
694 * configure.in (*-*-uclinux): Exclude newlib, libgloss and rda.
695 * configure: Regenerated.
699 Port change over from GCC:
701 * Makefile.tpl (BASE_FLAGS_TO_PASS): Pass along CONFIG_SHELL.
702 (configure-build-[+module+], configure-[+module+]): Likewise.
703 (configure-target-[+module+], configure-gcc, config.status): Likewise.
704 * Makefile.in: Regenerate.
708 * configure.in (raw_libstdcxx_flags): Remove the leading space.
709 * configure: Regenerate.
713 * COPYING.NEWLIB: Add license info for long long routines added to
718 * Makefile.tpl (EXTRA_GCC_FLAGS): Pass BOOT_ADAFLAGS.
719 * Makefile.in: Regenerate.
723 * configure.in (*-*-vxworks): Add target-libiberty to noconfdirs.
724 * configure: Regenerate.
728 * Makefile.tpl: Make GCC_FLAGS_TO_PASS a superset of
730 * Makefile.in: Regenerate.
734 * configure.in: Allow explicit specification of CFLAGS_FOR_BUILD.
736 * Makefile.tpl: Use CFLAGS_FOR_BUILD computed by configure
737 * Makefile.in: Rebuilt
741 * ltconfig (sys_lib_search_path_spec): Fix a typo for HPUX.
745 * config-ml.in: Use ac_configure_args directly instead of
746 ml_arguments. Only set ml_norecursion if --no[-]recursion is
751 * config-ml.in: Propagate INSTALL variables.
755 * configure.in: Pass a computed --program-transform-name
757 * configure: Regenerated.
761 * Makefile.tpl: Don't pass down obsolete ENQUIRE variable.
762 * Makefile.in: Regenerate.
764 * Makefile.tpl: Don't pass (unused) DLLTOOL or WINDRES to gcc.
765 * Makefile.in: Regenerate.
769 * configure.in (TOPLEVEL_CONFIGURE_ARGUMENTS, baseargs): Fix
771 * configure: Regenerated.
776 * src-release (do-proto-topleve): Remove junk files
777 intl/config.cache, intl/config.status,
778 intl/config.h, intl/stamp-h.
782 * src-release (dejagnu.tar): New target.
783 (dejagnu.tar.bz2): Recursively call "gdb-taz" rule.
784 (do-djunpack): Use $(PACKAGE) for the package name.
788 * configure: Regenerate.
792 * configure.in: Match GNU/KFreeBSD with new kfreebsd*-gnu triplet.
796 * configure.in: Ensure arguments to sed are properly spaced.
797 * configure: Regenerate.
803 * install-sh: Update to newer upstream versions (associated with
805 * missing: Likewise, plus $1Help2man -> $1 typo fix.
809 * configure.in: Set RAW_CXX_FOR_TARGET if unset.
810 * configure: Regenerated.
814 * configure.in: Use newline instead of semicolon when assuming
815 shell arguments in a for loop.
816 * configure: Regenerated.
821 * configure.in: When testing with_libs and with_headers, treat
823 * configure: Regenerate.
825 * configure.in (TOPLEVEL_CONFIGURE_ARGUMENTS): Quote properly for
827 (baseargs): Likewise.
828 * configure: Regenerate.
832 * configure.in: Disable libgcj for darwin not on powerpc.
833 * configure: Rebuild.
837 * src-release (do-proto-toplev): Remove junk files
838 dejagnu/example/calc/config.status,
839 dejagnu/example/calc/config.log.
843 * config-ml.in, symlink-tree: Add license.
850 * Makefile.tpl (check, check-c++): Express dependencies using
851 dependencies rather than commands.
852 * Makefile.in: Regenerate.
855 * Makefile.tpl (libsubdir): Use gcc instead of gcc-lib.
856 * Makefile.in: Update.
860 * configure.in (noconfigdirs): Do not add GDB when m32r-*-*.
865 * configure.in: Enable libgcj for darwin.
866 * configure: Rebuild.
870 * mkinstalldirs: Import autoconf 2.57 / automake 1.7 version.
874 * Makefile.tpl: Use 'mkinstalldirs' rather than 'mkdir' when
875 creating target and build subdirs to build all parent dirs as needed.
876 * Makefile.in: Rebuild.
877 * configure.in: Don't build dirs explicitly here.
878 * configure: Rebuild.
882 * Makefile.tpl (all-make): Depend on intl.
883 * Makefile.in: Rebuilt.
887 * config.if: Remove unused libc_interface determination.
891 * Makefile.in: Regenerate, correctly this time.
895 * Makefile.tpl: Set INSTALL and friends using autoconf. Remove
896 unused INSTALL_PROGRAM_ARGS.
897 * configure.in: Use AC_PROG_INSTALL.
898 * Makefile.in: Regenerate.
899 * configure: Regenerate.
903 * configure: Rebuilt.
905 * configure.in (noconfigdirs) [am33_2.0-*-linux*]: Don't build
908 * configure.in (am33_2.0-*-linux*): Added.
912 * configure.in: Add ${libgcj} to noconfigdirs for xtensa-*-* targets.
913 * configure: Regenerate.
917 * config-ml.in: Replace PWD with PWD_COMMAND.
918 * Makefile.tpl: Likewise.
919 * Makefile.in: Regenerated.
923 * configure.in: Clean up config-lang.in handling. Delete
924 useless assignment to "subdirs".
925 * configure: Regenerate.
929 * configure.in: Rename 'target_libs' to 'target_libraries'.
930 Remove useless reference to 'target_libs'.
931 * configure: Regenerate.
935 * Makefile.tpl: Add maybe-configure-itcl to configure-gdb.
936 * Makefile.in: Regenerate.
940 * Makefile.def: Introduce flags_to_pass.
941 * Makefile.tpl: Generate BASE_FLAGS_TO_PASS using it.
942 * Makefile.in: Regenerate.
946 * configure.in (noconfigdirs) <cris-*-*>: Disable target-newlib
948 <d30v-*-*, fr30-*-*, i960-*-*, m32r-*-*>: Disable gdb.
949 <h8300*-*-*>: Disable libf2c and ${libgcj}.
950 * configure: Regenerate.
954 * configure.in: Update testsuite_flags to new location.
955 * configure. Regenerate.
959 * Makefile.tpl: Remove BUILD_CC stuff.
960 * Makefile.in: Regenerate.
964 * config.guess: Update to 2003-06-12 version.
965 * config.sub: Update to 2003-06-13 version.
969 * MAINTAINERS: Add myself as MIPS co-maintainer.
973 * config.guess: Update to 2003-06-06 version.
974 * config.sub: Update to 2003-06-06 version.
978 * configure.in: Don't pass --with-stabs for mips*-sgi-irix6*o32.
979 * configure. Regenerate.
983 * configure.in: Disable serial configure by default.
984 * configure: Regenerate.
985 * Makefile.tpl: Abolish .NOTPARALLEL.
986 * Makefile.in: Regenerate.
988 * Makefile.tpl: Replace {build,host,target}_canonical by
990 * Makefile.in: Regenerate.
992 * Makefile.tpl: Fix stupid pasto.
993 * Makefile.in: Regenerate.
997 * Makefile.tpl: Remove bogus conditional.
998 * Makefile.in: Regenerate.
1002 * Makefile.tpl: Make 'recursive targets' using autogen rather
1003 than shell loop. Remove duplicate 'clean' targets and false
1005 * Makefile.def: Add systematic dependencies to 'recursive' targets.
1006 Add systematic method of specifying missing targets in subdirs.
1007 Add copyright boilerplate.
1008 * Makefile.in: Regenerate.
1009 * configure.in: Add 'recursive targets' to maybe list.
1010 * configure: Regenerate.
1012 * Makefile.tpl: Rename [+target+] to [+make_target+].
1013 * Makefile.def: Rename 'target' to 'make_target'.
1017 * README-maintainer-mode: Update URL for locating blessed config
1022 * ltconfig: Import this patch and modify for use with current
1023 version of ltconfig:
1027 * libtool.m4 (AC_LIBTOOL_SYS_DYNAMIC_LINKER): Add support for
1032 * Makefile.tpl: Make maybe-check-gcc .PHONY.
1033 * Makefile.in: Regenerate.
1037 * COPYING.NEWLIB: Add license info for newlib/libc/sys/linux/stdlib.
1041 * Makefile.tpl (configure-target-libiberty): Depend only on gcc, not
1043 * Makefile.in: Regenerate.
1047 * Makefile.tpl: Add missing empty maybe-check-gcc target.
1048 * Makefile.in: Regenerate.
1052 * configure.in: Use curly braces in the definition of tooldir.
1053 * configure: Regenerate.
1057 * configure.in: Switch more things to use maybe dependencies.
1058 * Makefile.tpl: Switch more things to use maybe dependencies.
1059 Factor out common code from autogen IF statements.
1060 * configure: Regenerate.
1061 * Makefile.in: Regenerate.
1065 * configure.in: Accept i[3456789]86 for machine type.
1066 * configure: Regenerate.
1070 * configure.in: Switch more things to use maybe dependencies.
1071 Rearrange a little. Use GCC_TOPLEV_SUBDIRS.
1072 * configure: Regenerate.
1073 * Makefile.tpl: Switch more things to use maybe dependencies.
1074 * Makefile.in: Regenerate.
1078 * Makefile.tpl (install-opcodes): Define.
1079 * Makefile.in: Rebuild.
1083 * config.guess: Update to 2003-05-09 version.
1084 * config.sub: Update to 2003-05-09 version.
1088 * configure.in: Correct sed script so that options in quotes are not
1090 * configure: Rebuild.
1094 * configure.in (FLAGS_FOR_TARGET): Remove $$s/newlib/libc/sys/cygwin
1095 and $$s/newlib/libc/sys/cygwin32 include paths.
1100 * config-ml.in: Restored from gcc repository.
1104 * Makefile.tpl: Require "makeinfo" from texinfo 4.2 or later.
1105 * Makefile.in: Regenerate.
1109 * src-release (DEVO_SUPPORT): Add src-release, Makefile.tpl,
1114 * Makefile.tpl: Clean $(BUILD_SUBDIR).
1115 * Makefile.in: Regenerated.
1119 * Makefile.tpl (MAKEINFOFLAGS): Default to --split-size=5000000.
1120 * Makefile.in: Regenerate.
1124 * configure.in (powerpc64*-*-linux*): Remove.
1125 * configure: Rebuilt.
1129 * Makefile.tpl (GCC_STRAP_TARGETS): New variable containing all the
1130 previous bootstrap targets, plus bubblestrap, quickstrap, cleanstrap,
1132 * Makefile.in: Regenerate.
1136 * configure.in (arm-*-netbsdelf*): Enable building java libraries.
1137 * configure: Regenerated.
1141 * libtool.m4 (lt_cv_deplibs_check_method): Use pass_all on mips*.
1142 * */configure: Rebuilt.
1146 * Makefile.tpl: Move .NOEXPORT, MAKEOVERRIDES back down.
1147 * Makefile.in: Regenerate.
1151 * Makefile.in: Regenerate with correct Makefile.def.
1155 * Makefile.tpl: Move .NOEXPORT, MAKEOVERRIDES up. Delete unused
1157 * Makefile.in: Regenerate.
1158 * configure.in: Clean up gxx_include_dir logic.
1159 * configure: Regenerate.
1163 * configure.in (gxx_include_dir): Fix typo.
1164 * configure: Regenerated.
1168 * texinfo/texinfo.tex: Import version 2003-02-03.16.
1172 * configure.in: Include $(build_tooldir)/sys-include in
1174 * configure: Regenerated.
1178 * Makefile.tpl: Reindent.
1179 * Makefile.in: Regenerate.
1180 * configure.in: Reindent. Don't set unused variables.
1181 * configure: Regenerate.
1183 * Makefile.tpl: Always pass down RANLIB.
1184 * Makefile.in: Regenerate.
1186 * Makefile.tpl: Don't set unused enable_shared, enable_threads macros.
1187 * Makefile.in: Regenerate.
1188 * configure.in: Remove unused logic relating to --enable-shared
1189 and --enable-threads. Remove bogus comments. Remove redundant
1191 * configure: Regenerate.
1193 * configure.in: Replace ${libstdcxx_version} by its value.
1194 Remove reference to mh-dgux.
1195 * configure: Regenerate.
1199 * Makefile.tpl: Rearrange.
1200 * Makefile.in: Regenerate.
1204 * configure: Remove site-file supprot - it is obsolete.
1208 * configure.in: Add support for kaOS as cross build target system.
1209 * configure: Regenerated.
1213 * Makefile.tpl: Add definition of CPPFLAGS to pass into
1214 configure-target-* as some target builds may require additional
1215 flags for preprocessor tests.
1216 * Makefile.in: Regenerated.
1220 * libtool.m4 (LD): Append -melf* option to LD on IRIX with GNU ld.
1221 * ltconfig: Handle it.
1222 * ltcf-cxx.sh: Use with_gnu_ld passed as a shell variable instead of
1227 * ltcf-cxx.sh: Replace $linker_flags with $compiler_flags wherever
1228 it is used as argument to $CC.
1229 * ltcf-gcj.sh: Likewise.
1233 * configure.in: Introduce --enable-maintainer-mode.
1234 * configure: Rebuilt.
1235 * Makefile.tpl (Makefile.in, configure): Enable dependencies only
1236 for maintainer mode.
1237 * Makefile.in: Rebuilt.
1241 * configure: Regenerate using autoconf 2.13.
1245 * config.guess: Import latest version.
1246 * config.sub: Import latest version.
1250 * Makefile.tpl (check-c++): Allow parallelism.
1254 * configure: Regenerate using autoconf 000227.
1258 * configure.in (*-*-darwin*): Rename from powerpc*-*-darwin*,
1259 don't configure target-libobjc.
1260 * configure: Regenerate.
1264 * Makefile.tpl (RANLIB): Define.
1265 * Makefile.in: Regenerate.
1269 * Makefile.def: Remove "snavigator", "grep", and "db" modules.
1270 * Makefile.tpl: Remove "all-snavigator" and "all-grep".
1271 * Makefile.in: Regenerated.
1272 * configure.in: Remove all traces of snavigator, db, and grep.
1273 * configure: Regenerated.
1277 * Makefile.tpl (all-sid): Add libiberty/bfd/opcodes dependencies.
1278 * Makefile.in: Regenerated.
1282 * config.if: Copy from GCC.
1286 * configure.in: Revert 24Jan change.
1287 * configure: Regenerate.
1291 * configure.in: Revert previous change.
1292 * configure: Regenerate.
1296 * configure.in: Make rda native-only.
1297 * configure: Regenerate.
1301 * configure.in: Add missing \.
1302 * configure: Rebuilt.
1306 * configure.in (baseargs): Avoid using \| in sed regular
1308 * configure: Rebuilt.
1312 * configure.in (baseargs): Remove all supported forms of
1313 --cache-file, --srcdir, --host, --build and --target options
1314 from argument lists.
1315 * configure: Rebuilt.
1319 * configure.in (noconfigdirs): Don't skip gas on IRIX 6.
1320 * configure: Rebuilt.
1324 * configure.in: Substitute TOPLEVEL_CONFIGURE_ARGUMENTS.
1325 * Makefile.tpl: Pass TOPLEVEL_CONFIGURE_ARGUMENTS to gcc.
1326 * Makefile.in: Regenerate.
1327 * configure: Regenerate.
1331 * Makefile.tpl (BASE_FLAGS_TO_PASS): Also pass DESTDIR.
1332 (install-info, dir.info): Prepend $(DESTDIR) to $(infodir).
1333 * Makefile.in: Regenerate.
1337 * configure.in: Remove Makefile in build, host and target modules
1338 unless configure was run with --no-recursion.
1339 * configure: Rebuilt.
1343 * config.guess: Update to 2003-01-03 version.
1344 * config.sub: Update to 2003-01-03 version.
1348 * configure: Regenerate with proper autoconf 2.13.
1352 * configure.in: Add AC_PREREQ for consistency.
1353 * configure: Regenerate.
1357 * configure.in (GDB_TK): Add tcl directories conditional on
1358 gdb/gdbtk directory being present.
1359 * configure: Regenerate.
1363 * configure.in (LD): Improve test for gcc. Try to set LD to the ld used
1364 by gcc if LD is not defined and we are not doing a Canadian Cross.
1365 * configure: Rebuilt.
1369 * src-release (ETC_SUPPORT): Add fdl.texi and texi2pod.pl.
1373 * Makefile.in: Rebuilt.
1374 * Makefile.def (target_modules) [libffi]: Allow installation.
1378 * configure.in: Fix use of $program_transform_name.
1379 * configure: Regenerated.
1383 * configure.in (baseargs): Don't remove first configure argument.
1384 * configure: Regenerated.
1388 * Makefile.tpl (local-distclean): Don't remove...
1389 (multilib.ts): ... this. Moved into...
1390 (multilib.out): ... this. Don't use sub-make.
1391 ($(BUILD_SUBDIR)/[+module+]/Makefile, [+module+]/Makefile,
1392 $(TARGET_SUBDIR)/[+module+]/Makefile, gcc/Makefile): Moved into...
1393 (configure-build-[+module+], configure-[+module+],
1394 configure-target-[+module+], configure-gcc): ... these. Test
1395 for Makefile existence. Drop config.status from dependencies.
1396 * Makefile.in: Rebuilt.
1397 * configure.in: Move gcc-version-trigger to the end of
1398 ac_configure_args. Add comments to maybedep.tmp and
1399 serdep.tmp. Introduce --disable-serial-configure. Remove
1400 nonopt from baseargs, matching and removing corresponding
1401 whitespace while at it.
1402 * configure: Rebuilt.
1406 * configure.in (host_configargs): Replace reference to
1407 no-longer-defined buildopts with --build=${build_alias}.
1408 * configure: Rebuilt.
1412 * Makefile.tpl ($(NOTPARALLEL)): Move to the end. Bring uses of
1413 program_transform_name to standard idiom.
1414 (AUTOGEN, AUTOCONF): Define.
1415 (Makefile.in): Use $(AUTOGEN).
1416 (Makefile): Depend on config.status, and use autoconf-style rule to
1417 build it. Move original commands to...
1418 (config.status): ... this new target.
1419 (configure): Add $(srcdir). Depend on config/acx.m4. Use
1421 * Makefile.in: Rebuilt.
1425 * Makefile.tpl: Fix dramatic bustage due to change in
1426 program_transform_name.
1427 * Makefile.in: Regenerate.
1429 * configure.in: Remove unnecessary PATH setting.
1430 * configure: Regnerate.
1432 * configure.in: Don't default to unprefixed tools unless
1433 the native tools will work.
1434 * configure: Regenerate.
1436 * configure.in: Convert to autoconf script. Blow away lots
1437 of now-redundant Makefile fragments.
1438 * configure: Generate using Autoconf.
1439 * Makefile.tpl: Rewrite to reflect autoconfiscation.
1440 * Makefile.in: Regenerate.
1444 * configure: Remove unneeded 'export's. Make CC_FOR_TARGET,
1445 CXX_FOR_TARGET, GCJ_FOR_TARGET substituted in configure.in only.
1447 * ChangeLog: Move a couple of entries from here to winsup/cygwin,
1452 * Makefile.tpl (multilib.out): Fix missing space.
1453 * Makefile.in: Regenerate.
1457 * Makefile.tpl: Use shared multilib.out. Use move-if-change for it.
1458 Convert (cd foo; make) to (cd foo && make). Clean up multilib.out.
1459 * Makefile.in: Regenerate.
1460 * configure.in: Remove unnecessary leftovers.
1464 * configure.in (extra_ranlibflags_for_target): New variable.
1465 (*-*-darwin): Add -c to ranlib commands.
1466 * configure (tooldir): Handle extra_ranlibflags_for_target.
1470 * COPYING.NEWLIB: Updated.
1471 * COPYING.LIBGLOSS: Ditto.
1475 * Makefile.tpl: Revert HJL's change.
1476 * Makefile.in: Regenerated.
1477 * configure.in: Put build_prefix before $(BUILD_SUBDIR) here, and
1482 * Makefile.tpl, configure.in: Substitute libstdcxx_incdir.
1483 * Makefile.in: Regenerate.
1487 * Makefile.tpl: Add @build_prefix@ before $(BUILD_SUBDIR).
1488 * Makefile.in: Regenerated.
1490 * configure.in (build_prefix): New. Substitute.
1494 * Makefile.tpl: Don't let real targets depend on phony targets.
1495 * Makefile.in: Regenerate.
1497 * Makefile.tpl (do-info): Depend on maybe-all-texinfo, not all-texinfo.
1498 * Makefile.in: Regenerate.
1502 * Makefile.tpl (all-gcc): Use 'make quickstrap' if there was a
1503 previous 'make bootstrap'.
1504 * Makefile.in: Regenerate.
1508 * configure.in (noconfigdirs) [mmix-*-*]: Disable libgloss and gdb.
1512 * Makefile.tpl (check-gcc-c++): Renamed from check-c++. Don't run
1514 (check-c++): Just depend on it and check-target-libstdc++-v3.
1515 * Makefile.in: Regenerate.
1519 * configure.in, Makefile.tpl, Makefile.def: Remove tclX.
1520 * Makefile.in: Regenerate.
1524 * COPYING.NEWLIB: Update list of alternate Regent of California
1525 licenses and discuss official revoking of advertising clause.
1526 * COPYING.LIBGLOSS: Ditto.
1530 * Makefile.tpl (configure-target-rda): Depend on $(ALL_GCC_C).
1531 * Makefile.in: Rebuilt.
1535 * configure: Fix bug put in by gremlins.
1537 * Makefile.tpl: Substitute more autoconfily.
1538 * configure: Substitute more autoconfily.
1539 * Makefile.in: Regenerate.
1543 * Makefile.tpl (all-sim): Depend on maybe-configure-gdb.
1544 * Makefile.in (all-sim): Ditto.
1548 * Makefile.tpl: Change configure dependencies to not have real
1549 targets depend on phony targets.
1553 * configure.in: Revert unintentional change.
1555 * src-release: Configure host subdirs.
1557 * Makefile.tpl: Change dependency for */multilib.out so that
1558 it works when gcc isn't in the tree.
1560 * configure.in: Substitute more.
1561 * configure: Run subconfigures from the Makefile.
1562 * Makefile.tpl: Run subconfigures from the Makefile; add a few
1563 convenience targets. Make sure gcc isn't rebuilt after bootstrap.
1567 * Makefile.tpl: Add targets for configuring host subdirs in Makefile,
1568 and corresponding dependencies.
1569 * Makefile.in: Regenerate.
1571 * configure.in (host_tools): Order binutils, gas and ld for
1572 convenience in running the testsuites.
1574 * Makefile.tpl: Introduce rules to serialize subconfigure runs.
1575 * Makefile.in: Regenerate.
1576 * configure.in: Introduce rules to serialize subconfigure runs.
1578 * configure.in: Introduce BASE_CC_FOR_TARGET.
1579 * Makefile.tpl: Reorganize and comment. Introduce HOST_CONFIGARGS.
1580 Realize configure-build-* targets. Realize configure-target-* targets.
1581 * Makefile.in: Regenerate.
1585 * configure: Move gcc_version_trigger stuff from here...
1586 * configure.in: ...to here.
1588 * configure.in: Separate subconfigure options added by this file from
1589 options given by the user. Add machinery to put args for host
1590 subconfigures into the Makefile.
1592 * Makefile.tpl: Remove 'vault' targets.
1593 * Makefile.tpl: Reorder and comment dependencies.
1594 * Makefile.in: Regenerate.
1598 * configure.in: Move host-specific darwin noconfigdirs into
1599 the host-specific section.
1603 * Makefile.tpl: Restore bkorb's style patch, accidentally lost
1605 * Makefile.in: Regenerate.
1607 (finishing slow-motion replay)
1608 * configure: Remove skip-this-dir support.
1609 * Makefile.tpl: Remove skip-this-dir support.
1611 * Makefile.tpl: Remove leftover support for non-autoconfiscated
1613 * Makefile.in: Regenerate.
1615 * Makefile.tpl: Strip out useless setting of 'dir'.
1616 * Makefile.in: Regenerate.
1620 (finishing slow-motion replay)
1621 * configure.in: Fix deeply stupid bug.
1623 * configure.in: Introduce RAW_CXX_FOR_TARGET and simplify embedded
1624 shell code in CXX_FOR_TARGET
1625 * Makefile.def: Introduce raw_cxx.
1626 * Makefile.tpl: Use raw_cxx to select between CXX_FOR_TARGET and
1628 * Makefile.in: Regenerate.
1632 (finishing slow-motion replay)
1633 * Makefile.tpl: Remove unnecessary ifs.
1634 * Makefile.in: Regenerate.
1636 * Makefile.tpl: Implement soft dependency machinery. Maybe-ize
1637 dependencies. Maybe-ize build-libiberty. Create dummy install
1638 targets for 'no_install' modules.
1639 * configure: Move GDB_TK substitution to configure.in. Move
1640 build_modules stuff to configure.in.
1641 * configure.in: Implement soft dependency machinery. Maybe-ize
1642 GDB_TK, rearrange slightly. Move build_modules stuff from configure.
1643 * Makefile.in: Regenerate.
1647 (continuing slow-motion replay)
1648 * Makefile.tpl: Make all-target, install-target behave similarly
1649 to all, install (only hitting configured targets). Eliminate
1650 unused macro defintions.
1652 * Makefile.tpl: Add all-gcc: all-build-libiberty dependency when
1655 * Makefile.tpl: Add all-gcc: all-libiberty dependency.
1657 * ltcf-c.sh, ltcf-gcj.sh, Makefile.tpl: Correct BUILD/HOST confusion.
1659 * configure.in: Produce lists of subdir targets we're actually
1660 configuring. Remove references to "dosrel".
1661 * Makefile.tpl: Let configure set which subdir targets are hit.
1662 Remove install-cross; clean up install; remove ALL. Remove
1663 references to "dosrel". Remove "EXTRA_TARGET_HOST" hackery.
1664 Autogenerate host module targets. Remove empty dependency lines
1665 and redundant dependency; rearrange slightly.
1666 * Makefile.def: Add host-side libtermcap, utils.
1668 * Makefile.in: Regenerate.
1672 (Continuing slow-motion replay)
1673 * Makefile.def: Add list of recursive targets to autogenerate.
1675 * Makefile.tpl: Autogenerate do-* targets. Autogenerate *-target-*
1676 targets. Autogenerate *-build-* targets.
1677 * Makefile.in: Regenerate.
1681 (Continuing slow-motion replay)
1682 * configure: More autoconf-style substitutions.
1683 * Makefile.tpl: More autoconf-style substitutions.
1684 * Makefile.in: Regenerate.
1688 (Continuing slow-motion replay)
1689 * configure: Substitute more variables in a more autoconf-friendly
1690 way. Simplify slightly.
1691 * Makefile.tpl: Make more variables substitutable in an
1692 autoconf-friendly way.
1693 * Makefile.in: Regenerate.
1697 (Continuing slow-motion replay)
1698 * configure.in (v810*): Remove special setting of tools.
1700 * configure: Add support for extra required flags for ar or nm.
1701 * configure.in (aix4.3+): Use above support for target-specific
1702 issues, rather than using config/mt-aix43.
1706 (Starting slow-motion replay merge from gcc 3.4 b-i-b branch)
1707 * configure: Remove 'removing', which doesn't work. Replace $subdir
1708 with . everywhere. Replace $subdirs with ''. Replace $makesrcdir
1709 with $srcdir. Reformat indentation. Substitute some variables
1710 formerly hard-coded in the Makefile for build=host.
1711 * Makefile.tpl: Autogenerate more; make more autoconf-friendly.
1712 * Makefile.def: Autogenerate more.
1713 * Makefile.in: Regenerate.
1717 * Makefile.tpl: syntactic cleanup
1721 * Makefile.def (host_modules): Add rda.
1722 * Makefile.in: Regenerate.
1723 * configure.in (target_tool): Add target-rda to list.
1727 * Makefile.tpl (bootstrap): Add bubblestrap, quickstrap, cleanstrap,
1728 and restrap targets to this rule.
1729 * Makefile.in: Regenerate.
1733 * configure.in (i[3456]86-*-linux*): Add check to disable
1734 ${libgcj} for glibc1.
1738 * configure.in: Add tic4x target.
1742 * Makefile.tpl: Make SET_LIB_PATH substitution more autoconfy.
1743 * Makefile.tpl: Make RPATH_ENVVAR substitution more autoconfy.
1744 * configure.in: Make SET_LIB_PATH substitution more autoconfy.
1745 * configure.in: Make RPATH_ENVVAR substitution more autoconfy.
1746 * Makefile.in: Regenerate.
1750 * Makefile.tpl: Eliminate reference to all-gui, all-libproc.
1751 * Makefile.in: Regenerate.
1753 * Makefile.def: Remove order dependency comments.
1754 * Makefile.tpl: Add explicit install-install dependencies.
1755 * Makefile.in: Regenerate.
1757 * Makefile.tpl: Remove material now in src-release. (Finally!)
1758 * Makefile.in: Regenerate.
1760 * configure: Restore my original patch by syncing with gcc version.
1762 * Bring following over from gcc:
1766 * configure.in (s390*-*-linux*): Enable libgcj.
1770 * Makefile.in: Regenerate. This really ought to fix things. :sigh:
1774 * configure: Move stray lines back to where they belong.
1778 * Makefile.tpl: Insert configure-target target, for src-release.
1780 * configure: Finish reverting change which Andrew Cagney started
1781 reverting. Should fix bustage.
1783 * src-release (BINUTILS_SUPPORT_DIRS): Add cpu directory.
1784 * src-release: New file. Contains material for making net
1785 releases for gdb, binutils, et al., formerly in Makefile.in.
1789 * cpu: New top level directory. Intended to hold input files for
1790 CGEN which have FSF copyright assignment.
1791 * Makefile.in (BINUTILS_SUPPORT_DIRS): Add cpu directory.
1795 Revert below (note that src does not contain Makefile.tpl):
1796 * Makefile.tpl: Make subsituted variables more autoconfy.
1797 * Makefile.in: Regenerate.
1801 * configure: Revert accidentally applied changes.
1803 * Makefile.tpl: Make more autoconf-friendly.
1804 * Makefile.in: Regenerate.
1805 * configure: Make substitution more autoconf-like.
1809 * configure.in (arm-*-coff, strongarm-*-coff, xscale-*-coff): Use a
1810 single entry to handle all these.
1811 (arm-*-elf, strongarm-*-elf, xscale-*-elf): Likewise. Also enable
1812 libjava on arm-*-elf.
1816 * configure.in (powerpc-*-darwin*): Don't configure BFD, TK, or the
1817 things that depend on them.
1821 * Makefile.tpl: Make subsituted variables more autoconfy.
1822 * Makefile.in: Regenerate.
1823 * configure: Make seds more autoconfy.
1827 * Makefile.tpl: Rewrite substituted lines to look autoconfy.
1828 * Makefile.in: Regenerate.
1829 * configure.in: Rewrite sed statements to look autoconfy.
1831 * Makefile.tpl: Autogenerate *-target-* lists, dependencies of
1832 all-target-foo on configure-target-foo.
1833 * Makefile.def: Ditto.
1834 * Makefile.in: Rebuild.
1838 * Makefile.def: New file.
1839 * Makefile.tpl: New file.
1840 * Makefile.in: Generate from Makefile.tpl with 'autogen Makefile.def'.
1842 * configure.in: Minor rearrangement. Simplify tests.
1846 * configure.in (with_headers): Skip copy if value is "yes".
1847 (with_libs): Likewise.
1851 * configure.in (*-*-netbsd*): Use noconfigdirs, not skipdirs.
1852 * configure.in (sh*-*-pe*): Ditto.
1853 * configure.in (mips*-*-pe*): Ditto.
1854 * configure.in (*arm-wince-pe): Ditto.
1856 * configure.in: Rearrange.
1860 * Import these changes from the config master repository:
1864 * config.sub: Add tic4x target.
1868 * config.guess: Detect NSR-D machines for nsr-tandem-nsk.
1873 * COPYING.NEWLIB: More updates.
1877 * COPYING.NEWLIB: Update.
1881 * texinfo/texinfo.tex: Import version 2002-06-04.06.
1883 * config.guess: Import version 2002-08-23.
1884 * config.sub: Import version 2002-08-22.
1888 * Makefile.in (GCC_FOR_TARGET): Prepend STAGE_CC_WRAPPER.
1889 * configure.in (CC_FOR_TARGET, GCJ_FOR_TARGET, CXX_FOR_TARGET,
1890 CXX_FOR_TARGET_FOR_RECURSIVE_MAKE): Likewise.
1894 * configure.in (hppa*-*-openbsd*): Treat like hppa*-*-*elf*.
1898 * configure.in (mips*-*-linux*): Don't skip target-libffi.
1902 * configure.in: Move generic linux case to end. Copy generic
1903 linux noconfigdirs to mips*-*-linux* entry and new
1904 powerpc64*-*-linux* entry. Add target-libffi for the latter.
1908 * MAINTAINERS: Clarify on config.guess and config.sub, and add
1909 one instance of them which was missed to the list to update.
1913 * config.guess: Update to 2002-07-09 version.
1914 * config.sub: Update to 2002-07-03 version.
1918 * configure.in: Remove two redundant tests.
1922 * configure.in (mips*-*-irix6*o32): Enable stabs.
1926 * configure.in: Don't build grez.
1927 * Makefile.in: Ditto.
1929 * Makefile.in: Remove references to bsp, cygmon, libstub.
1930 * configure.in: Ditto.
1932 * configure.in: Remove leftover reference to gdbtest.
1936 * configure.in (gxx_include_dir): Change to match versioned
1937 C++ headers if --enable-version-specific-runtime-libs is used.
1941 * ltcf-cxx.sh (hpux*): Modify to support ia64-*-hpux*.
1945 * configure.in: Make --without-x work.
1949 * contrib: New directory. Created to contain a copy of the
1950 texi2pod.pl script so that it is in the same place as the version in
1951 the FSF GCC sources.
1955 * configure.in: Rearrange target Makefile fragment collection.
1957 * Makefile.in: Don't try to build gdbtest, tgas, ispell, inet, or
1959 * configure.in: Ditto.
1963 * Makefile.in: Eliminate 'apache' targets.
1964 * configure.in: Eliminate 'apache' targets.
1966 * configure.in: Eliminate redundant tests. Reorganize.
1968 * Makefile.in: Eliminate last reference to LIBGCC1_TEST.
1970 * config-ml.in: Eliminate references to Cygnus configure.
1972 * Makefile.in: Eliminate references to building emacs.
1976 * configure.in: Add support for ip2k.
1980 * configure.in (host_tools): Remove cgen.
1982 * Makefile.in (all-cgen): Remove; runs from its source directory.
1983 (check-cgen, install-cgen, clean-cgen): Likewise.
1984 (all-opcodes): No not depend on all-cgen.
1985 (all-sim): Likewise.
1989 * configure.in: Fix AIX configury bug.
1993 * configure.in: Replace ${topsrcdir} with ${srcdir}.
1995 * configure.in: Move definition of libstdcxx_flags right above
1996 usage, rather than way earlier.
1998 * configure.in: Pull definition of is_cross_compiler earlier.
2000 * configure.in: Rearrange a little.
2002 * configure.in: Remove references to librx.
2003 * Makefile.in: Remove references to librx.
2007 * configure.in: Eliminate ${gasdir} variable.
2011 * configure.in: Add support for frv.
2012 * config.sub: Add support for frv.
2016 * Makefile.in (CFLAGS_FOR_TARGET): Add -O2.
2020 * configure.in (vax-*-netbsd*): Re-enable gas.
2024 * Makefile.in: Replace HOST_PREFIX, HOST_PREFIX_1 with BUILD_PREFIX,
2025 BUILD_PREFIX_1, to correct nomenclature.
2026 * configure: Likewise.
2028 * Makefile.in: Eliminate version-specific references to tcl8.1, tk8.1.
2029 * configure.in: Eliminate version-specific references to tcl8.1, tk8.1.
2033 * config-ml.in: Propogate DESTDIR also.
2037 * configure.in (vax-*-netbsd*): Don't build gas for this
2042 * configure.in (noconfigdirs): Don't compile libiberty, libstdcxx
2047 * config.sub: Add DLX target.
2051 * config.guess: Update to 2002-05-22 version.
2052 * config.sub: Likewise.
2056 * Makefile.in: Allow for PWDCMD to override hardcoded pwd.
2057 * config-ml.in: Likewise.
2058 * configure: Likewise.
2059 * configure.in: Likewise.
2063 * configure.in: Simplify makefile fragment collection.
2065 * configure.in: Remove code to build emacs.
2067 * configure.in : Remove --srcdir argument from targargs and buildargs
2068 (it's always overridden in the Makefile anyway). Rearrange a bit.
2070 * configure: Move some logic to configure.in.
2071 * configure.in: Move some logic from configure.
2075 * COPYING.LIBGLOSS: New file.
2079 * Makefile.in: Honour DESTDIR.
2083 * configure.in (noconfigdirs): Don't disable libgcj on
2084 sparc64-*-solaris* and sparcv9-*-solaris*.
2088 * configure.in: Revert 2002-04-18's patch; fixed in libjava.
2092 * configure.in (FLAGS_FOR_TARGET): Do not add
2093 -B$$r/$(TARGET_SUBDIR)/newlib/ when compiling newlib natively
2094 on i[3456]86-*-linux*.
2098 * configure.in (noconfigdirs): Replace [ ] with test.
2100 * configure.in (noconfigdirs): Do not add target-newlib if
2101 target == i[3456]86-*-linux*, and host == target.
2105 * config.guess: Updated to 2002-04-26's version.
2106 * config.sub: Updated to 2002-04-26's version.
2110 * configure.in: delete reference to absent file
2112 * configure.in: replace '[' with 'test'
2114 * configure.in: Eliminate references to gash.
2115 * Makefile.in: Eliminate references to gash.
2117 * configure.in: remove useless references to 'pic' makefile fragments.
2119 * configure.in: (*-*-windows*) Finish removing.
2121 * configure.in: Eliminate redundant test for libgui.
2125 * configure.in (h8300*-*-rtems*): Disable libf2c and libgcj.
2126 (sparc-*-elf*, sparc64-*-elf*): Disable libgcj.
2130 * configure.in: remove references to dead files
2134 * configure.in: Disallow configuring libgcj when it is already
2135 installed and we're using Solaris 2.8 linker. Do enable libgcj on
2136 Solaris 2.8 by default. For PR libgcj/6158.
2140 * configure.in: Move default CC setting out of config/mh-* fragments
2145 * configure.in: don't even try to configure or make a subdirectory
2146 if there's no configure script for it.
2150 * MAINTAINERS: Remove chill maintainers.
2151 * Makefile.in (CHILLFLAGS): Remove.
2152 (CHILL_LIB): Remove.
2153 (TARGET_CONFIGDIRS): Remove libchill.
2154 (CHILL_FOR_TARGET): Remove.
2155 (BASE_FLAGS_TO_PASS): Don't pass CHILLFLAGS, CHILL_FOR_TARGET, or
2157 (CONFIGURE_TARGET_MODULES): Remove configure-target-libchill.
2158 (CHECK_TARGET_MODULES): Likewise.
2159 (INSTALL_TARGET_MODULES): Likewise.
2160 (CLEAN_TARGET_MODULES): Likewise.
2161 (configure-target-libchill): Remove.
2162 (all-target-libchill): Remove.
2163 * configure.in (target_libs): Remove target-libchill.
2164 Do not compute CHILL_FOR_TARGET.
2165 * libchill: Remove directory.
2169 * Makefile.in, configure.in, configure: Sync with gcc, entries
2174 * configure.in: Add FLAGS_FOR_TARGET to GCJ_FOR_TARGET.
2175 Fixes PR libgcj/6068.
2179 * configure.in (i*86-*-netbsdelf*): Don't disable libgcj.
2183 * configure.in (alpha*-dec-osf*): Enable libgcj.
2187 Fix for: PR bootstrap/3591, target/5676
2188 * configure.in (mcore-pe): Disable the configuration of
2189 libstdc++-v3 since exceptions are not supported.
2193 * configure.in: Enable libgcj for xscale-elf target.
2197 * configure.in (libstdcxx_flags): Don't add libstdc++-v3 flags for
2199 (CXX_FOR_TARGET): Explain why -shared-libgcc here.
2203 * configure.in (CXX_FOR_TARGET): Add -shared-libgcc for
2204 libstdc++-v3 and libjava.
2208 * gcc/Makefile.in: Removed libstdc++-v3 dependancy for libjava and
2213 * config.guess: Updated to 2002-01-30's version.
2214 * config.sub: Updated to 2002-02-01's version.
2215 Contribute sh64-elf.
2217 * configure.in: Added sh64-*-*.
2221 * Makefile.in (all-fastjar): Also depend on all-libiberty.
2222 (all-target-fastjar): Also depend on all-target-libiberty.
2226 * configure, configure.in: Use temp file for long sed commands.
2230 * configure.in (noconfigdirs) [h8300*-*-*, h8500-*-*]: Disable
2235 * configure.in (noconfigdirs) [mmix-*-*]: Disable libgcj.
2239 * configure.in (noconfigdirs) [cris-*-*]: Disable libgcj.
2243 * configure: Handle temporary files securely using mkdir.
2247 * configure.in (*-*-linux*): Disable configuration of target-newlib
2248 and target-libgloss.
2252 * Makefile.in (EXTRA_TARGET_FLAGS): Pass RANLIB_FOR_TARGET for
2257 * Makefile.in (check-c++): Add missing semicolon.
2261 * configure.in (sh-*-linux*): New.
2265 * configure.in (noconfigdirs): Don't compile libiberty, libstdcxx
2266 and libgcj on m68hc11/m68hc12.
2270 * Makefile (CFLAGS_FOR_BUILD): New.
2271 (EXTRA_GCC_FLAGS): Add CFLAGS_FOR_BUILD.
2275 * configure.in (libstdcxx_flags): Do not try to execute
2276 libstdc++-v3/testsuite_flags until it exists.
2280 * configure.in (libstdcxx_flags): Remove reference to libstdc++.INC.
2284 * ltcf-cxx.sh: Add -nostdlib to IRIX 6 archive_cmds.
2288 * configure.in: Move *-chorusos target case to the proper switch.
2293 * Makefile.in (STAGE1_CFLAGS): Pass down.
2297 * config.guess: Add hppa64-linux support. Note for next import that
2298 this is already in the master file.
2299 * configure.in: Likewise. Accept `parisc' alias for `hppa'.
2303 * Makefile.in (DO_X): Do not backslash single-quotes in
2304 backquotes (two places).
2308 * Makefile.in (DO_X): Quote nested quotes.
2312 * Makefile.in (DO_X): Use double quotes for quoting
2313 "RANLIB=$${RANLIB}".
2317 * configure.in: Only use `lang_requires' for languages athat are
2322 * configure.in: Allow config-lang.in to set `lang_requires' to list
2323 of other required languages.
2327 * Makefile.in: Remove RANLIB definition. Use RANLIB
2328 in RANLIB_FOR_TARGET, EXTRA_HOST_FLAGS, EXTRA_TARGET_FLAGS,
2329 EXTRA_GCC_FLAGS, $(DO_X) targets only when the RANLIB is set.
2334 * Makefile.in (check-c++): Use tabs, not spaces.
2338 * Makefile.in (check-c++): New rule.
2340 * configure.in (target_libs): Remove libg++.
2341 (noconfigdirs): Remove libg++.
2342 (noconfigdirs): Same.
2343 (noconfigdirs): Same.
2344 (noconfigdirs): Same.
2346 * config-ml.in: Remove libg++ references.
2348 * Makefile.in (TARGET_CONFIGDIRS): Remove libio, libstdc++, libg++.
2349 (ALL_TARGET_MODULES): Same.
2350 (configure-target-libg++): Remove.
2351 (all-target-libg++): Remove.
2352 (configure-target-libio): Remove.
2353 (all-target-libio): Remove.
2354 (check-target-libio): Remove.
2356 (libg++.tar.bz2): Remove.
2357 (all-target-cygmon): Remove libio.
2358 (all-target-libstdc++): Remove.
2359 (configure-target-libstdc++): Remove.
2360 (TARGET_LIB_PATH): Remove libstdc++.
2361 (ALL_GCC_CXX): Remove libstdc++.
2362 (all-target-gperf): Correct.
2366 * configure: Introduce GCJ_FOR_TARGET.
2367 * configure.in: Ditto.
2368 * Makefile.in: Ditto.
2372 * configure.in: for *-chorusos, don't config target-newlib and
2377 Remove V2 C++ library.
2378 * configure.in: Remove --enable-libstdcxx_v3 support.
2382 * configure.in (target_makefile_frag) [alpha*-*]: Use mt-alphaieee.
2386 * configure.in: Allow libgcj to be built on Sparc Solaris.
2390 * configure.in: Enable libgcj on several additional platforms.
2394 * configure.in: Enable libgcj for linux targets.
2398 * Makefile.in (CONFIGURE_TARGET_MODULES): Pass back configuration
2399 failures of subdirectories.
2403 * configure: handle DOS-style absolute paths.
2407 * configure.in: remove supported directories from $noconfigdirs for DJGPP.
2411 * Makefile.in (BASE_FLAGS_TO_PASS): Alphabetize.
2412 (libstdcxx_incdir): Pass down.
2413 * config.if: Remove expired bits for cxx_interface, add stub.
2414 (libstdcxx_incdir): Add variable for g++ include directory.
2415 * configure.in (gxx_include_dir): Use it.
2419 * configure.in: Handle lang_dirs.
2423 * configure.in: Disable libgcj for any target not specifically
2424 listed. Disable libgcj for x86 and Alpha Linux until compatible
2429 * Makefile.in (local-distclean): Also remove fastjar.
2433 * configure.in: Define libgcj. Disable libgcj target libraries for
2438 * configure.in (target_libs): Revert 2000-12-08 patch.
2439 (noconfigdirs): Added target-libjava.
2443 * Makefile.in: handle DOS-style absolute paths.
2447 * Makefile.in (TARGET_CONFIGDIRS): Wrong place. Removed note about
2449 * configure.in (target_libs): Removed `target-libjava'.
2453 * Makefile.in (TARGET_CONFIGDIRS): Added note about libjava.
2454 (ALL_MODULES): Added fastjar.
2455 (NATIVE_CHECK_MODULES, INSTALL_MODULES, CLEAN_MODULES): Likewise.
2456 (all-target-libjava): all-fastjar replaces all-zip.
2457 (all-fastjar): Added.
2458 (configure-target-fastjar, all-target-fastjar): Likewise.
2459 * configure.in (host_tools): Added fastjar.
2463 * Makefile.in (local-distclean): Remove leftover built files.
2467 * configure.in (enable_libstdcxx_v3): Fix typo,
2468 libstd++ -> libstdc++.
2472 * configure: Provide the original toplevel configure arguments
2473 (including $0) to subprocesses in the environment rather than
2474 through gcc/configargs.h.
2478 * configure: Turn on libstdc++ V3 by default.
2482 * configure (gcc/configargs.h): Only create if there is a build GCC
2487 * configure: Save configure arguments to gcc/configargs.h.
2491 * Makefile.in (bootstrap): avoid recursion if subdir missing
2493 (do-proto-toplev): ditto
2497 * configure.in: Do not build byacc for hppa64. Provide paths to the
2498 X11 libraries for hppa64.
2502 * Makefile.in (all-gcc): Depend on all-zlib.
2503 (CLEAN_MODULES): Add clean-zlib.
2504 (ALL_MODULES): Add all-zlib.
2505 * configure.in (host_libs): Add zlib.
2509 * configure.in (FLAGS_FOR_TARGET): Use $target_configdirs and
2510 $targargs to tell whether newlib is going to be built.
2512 * configure.in [disable-libstdcxx-v3] (libstdcxx_flags): Search
2513 $$r/TARGET_SUBDIR/libio for _G_config.h.
2517 * configure.in (libstdcxx_flags): Remove -isystem $$s/libio/stdio.
2519 * configure: Make enable_threads and enable_shared defaults
2520 explicit. Substitute enable_threads into generated Makefiles.
2521 * configure.in: Accept *-*-linux* not just *-*-linux-gnu*.
2522 * libtool.m4: Accept *-*-linux* not just *-*-linux-gnu*.
2526 * configure.in: Re-enable all references to libg++ and librx.
2530 * configure.in: Add *-*-freebsd* configurations.
2534 * Makefile.in (do-tar-bz2): Delete rule. Replace with ...
2535 (do-tar, do-bz2): New rules.
2536 (taz): Update. Replace do-tar-bz2 with do-tar and do-bz2.
2537 (gdb-tar): New rule.
2538 (gdb-taz): Rewrite. Use gdb-tar and do-bz2.
2539 (insight_dejagnu.tar): New rule.
2540 (insight.tar): New rule.
2541 (gdb+dejagnu.tar): New rule.
2542 (gdb.tar): New rule.
2546 * MAINTAINERS: Update dejagnu/
2550 * ltmain.sh (relink_command): Fix typo in previous change.
2554 * ltmain.sh (taglist): Initialized. Don't let `CC' tag out of it.
2555 (relink_command): Added --tag flags.
2556 (mode=install): If relinking fails; error out.
2560 * Makefile.in (NOTPARALLEL): New. Use it instead of explicit
2562 (do-check): Rename from check.
2563 (check): Allow parallel check.
2567 * Makefile.in (.NOTPARALLEL): Add fake tag.
2571 * configure.in: Enable gprof for mips*-*-linux*.
2575 * configure.in (libstdcxx_flags): Don't add libstdc++-v3 flags for
2577 (CXX_FOR_TARGET): Add -shared-libgcc for libstdc++-v3 and libjava.
2581 * texinfo/texinfo.tex: Update to version 2002-02-14.08.
2585 * config.guess: Import from master sources, rev 1.232.
2586 * config.sub: Import from master sources, rev 1.246.
2590 * Makefile.in (MAKEINFO): Don't assume makeinfo will be built just
2591 because its Makefile is there; test for the executable instead.
2595 Contribute sh64-elf.
2597 * configure.in: Added sh64-*-*.
2601 * COPYING.NEWLIB: Remove advertising clause from
2602 Berkeley and Red Hat licenses.
2606 * Makefile.in: Add all-tix to deps for all-snavigator
2607 so that tix is built when building snavigator.
2611 * config.guess: Import from master sources, rev 1.229.
2612 * config.sub: Import from master sources, rev 1.240.
2617 * libtool.m4 (HPUX_IA64_MODE): Set to 32 or 64 based on ABI.
2618 (lt_cv_deplibs_check_method, lt_cv_file_magic_cmd,
2619 lt_cv_file_magic_test_file): Set to appropriate values for HP-UX
2621 * ltcf-c.sh (archive_cmds, hardcode_*): Ditto.
2622 * ltconfig (shlibpath_*, dynamic_linker, library_names_spec,
2623 soname_spec, sys_lib_search_path_spec): Ditto.
2627 * configure.in (*-*-netbsd*): New. Skip target-newlib,
2628 target-libiberty, and target-libgloss. Skip Java-related
2629 libraries if not supported for NetBSD on target CPU.
2633 * configure.in: Import StrongARM and XScale target_configdirs from
2638 * config.guess: Import from master sources, rev 1.225.
2639 * config.sub: Import from master sources, rev 1.238.
2641 * MAINTAINERS: Updated notes on config.guess and config.sub.
2645 * configure.in (ia64*-*-hpux*): New target for IA64 HP-UX,
2646 ld and gdb are not supported.
2650 * Change reference to Cygnus Solutions to be Red Hat.
2654 * COPYING.NEWLIB: Update generic copyright date.
2658 * configure.in: Remove target-bsp and target-cygmon from arm builds.
2659 Allow target-libgloss to be built for arm, strongarm, and xscale.
2663 * MAINTAINERS: Update URL for config.* scripts.
2667 * config.sub: Import latest version.
2668 * config.guess: Likewise.
2672 * configure.in (FLAGS_FOR_TARGET): Remove -nostdinc and -isystem
2673 options for i[3456]86-pc-linux* native builds.
2677 * MAINTAINERS: gcc adopts symlink-tree, refer more to
2680 Import this patch from gcc:
2684 * symlink-tree: handle DOS-style absolute paths.
2689 When build != host, create libiberty for the build machine.
2691 * Makefile.in (TARGET_CONFIGARGS, BUILD_CONFIGARGS): Replace
2693 (ALL_BUILD_MODULES_LIST, BUILD_CONFIGDIRS, BUILD_SUBDIR):
2695 (ALL_BUILD_MODULES, CONFIGURE_BUILD_MODULES): New variables
2697 (all.normal): Depend on ALL_BUILD_MODULES.
2698 (CONFIGURE_TARGET_MODULES rule): Use TARGET_CONFIGARGS.
2699 (all-build-libiberty): Depend on configure-build-libiberty.
2701 * configure: Calculate and substitute proper value for
2703 * configure.in: Create the build subdirectory.
2704 Calculate and substitute TARGET_CONFIGARGS (formerly
2705 CONFIG_ARGUMENTS); also BUILD_SUBDIR and BUILD_CONFIGARGS (new).
2709 * config.sub: Update to version 1.232 on subversion.
2713 * Makefile.in (do-proto-toplev): Use msgfmt to generate .gmo
2714 files from .po files for a distribution.
2718 * COPYING.NEWLIB: Mention preserved notice in specific parts.
2722 Merged from net gcc:
2724 * ltcf-c.sh: Use $objext, not $ac_objext.
2726 * ltcf-cxx.sh: Add support for GNU.
2728 * ltcf-c.sh: Don't disable shared libraries for AIX5/IA64. Preserve
2729 default settings if using GNU tools with that configuration.
2730 * ltcf-cxx.sh: Ditto.
2731 * ltcf-gcj.sh: Ditto.
2733 * ltconfig: Set max_cmd_len to a maximum of 512Kb, as it seems some
2734 HPUX 11.0 systems have trouble with 1MB. Mark as gcc-local.
2735 * ltmain.sh: Mark as gcc-local.
2739 * Makefile.in (all-bison): Revert 2001-10-24.
2740 Don't depend on texinfo.
2744 * COPYING.NEWLIB: Add BSD-style license/copyright blurb for my work.
2748 * configure.in (--enable-languages): Be more permissive about
2749 syntax. Check for empty lists better. Warn about $LANGUAGES.
2753 * Makefile.in (MAKEINFO): Use "missing" for makeinfo older than 4.0.
2757 Makefile.in (all-bison): Don't depend on texinfo.
2761 * gettext.m4: Test po/POTFILES.in exists before trying to read.
2765 * Makefile.in (configure-target-gperf): Depend on $(ALL_GCC_CXX).
2769 * config.sub, config.guess: Import latest from subversions.
2773 * Makefile.in (AS_FOR_TARGET, LD_FOR_TARGET,
2774 DLLTOOL_FOR_TARGET, WINDRES_FOR_TARGET, AR_FOR_TARGET,
2775 RANLIB_FOR_TARGET, NM_FOR_TARGET): Don't use double quotes to
2776 avoid quotes nesting problems.
2777 (NATIVE_CHECK_MODULES): Ditto, just for consistency.
2778 (DO_X): Export only variables that are set.
2782 * configure.in (sparc-sun-solaris2*): Don't use /usr/bin/which on
2783 Solaris when testing for the /usr/ucb/cc compiler; it has incorrect
2784 semantics. Use the shell built-in "type" command instead.
2788 * config.sub: Reverted the earlier change, this version is not the
2793 * config.sub: Change machine triplets from mipsel*-* to mips*el-*.
2794 Add support for mips64.
2798 * configure.in: Enable libstdc++-v3 for h8300 targets.
2803 * config.sub: Add support for mipsisa32.
2807 * config.sub, config.guess: Import latest from subversions.
2811 * config.sub, config.guess: Import latest from subversions.
2815 * MAINTAINERS: Clarify libiberty merge rules and procedures.
2819 * Makefile.in: Revert 2001-06-17.
2820 (VER): If AM_INIT_AUTOMAKE uses BFD_VERSION, get version from bfd/.
2824 * Makefile.in (gas.tar.bz2): Pass TOOL=bfd PACKAGE=gas to make.
2825 (gas+binutils.tar.bz2): Likewise.
2826 (binutils.tar.bz2): Pass TOOL=bfd PACKAGE=binutils to make.
2830 * Makefile.in (VER): When present, extract the version number from
2831 the file version.in.
2835 * Makefile.in (AS_FOR_TARGET, LD_FOR_TARGET, NM_FOR_TARGET): If
2836 gcc/xgcc is built, use -print-prog-name to find out the program
2841 * ltcf-c.sh (archive_cmds, archive_expsym_cmds) [solaris,
2842 with_gcc]: Use `gcc -shared' to build a shared library.
2846 * ltcf-c.sh (archive_cmd) [hpux, with_gcc]: Use gcc to link shared
2851 * ltcf-cxx.sh (osf3/osf4/osf5): Support creation of C++ shared
2852 libraries when using g++ with native linker.
2856 * ltconfig, ltmain.sh: Upgrade to libtool 1.4a 1.641.2.256.
2860 * configure.in : enable ld for aix
2864 * ltcf-cxx.sh (allow_undefined_flag, no_undefined_flag)
2865 [aix4*|aix5*]: Prepend blank.
2869 * ltconfig, ltmain.sh, libtool.m4, ltcf-c.sh, ltcf-cxx.sh,
2870 ltcf-gcj.sh: Upgraded to libtool 1.4a 1.641.2.254. Rebuilt a number
2871 of subdir/configure scripts to use the new libtool.m4.
2875 * config.if (libc_interface): Set to -libc6.2- for cross
2876 compiling to Linux/glibc 2.2.
2880 * configure.in (noconfigdirs) [*-cygwin*, *-mingw*, *-beos]: Disable
2885 * configure.in (noconfigdirs): Don't reset it from scratch in the
2886 target case; only append to it.
2890 * configure.in (noconfigdirs) [hppa*-*-*, mips*-*-irix6*,
2891 sparc-*-solaris2.8]: Disable ${libgcj}.
2895 * configure.in (libgcj_saved): Copy from $libgcj.
2896 (libgcj): Zero out if --enable-libgcj; add to noconfigdirs is
2901 * ltconfig, ltmain.sh, ltcf-cxx.sh: Upgraded to libtool 1.4a
2906 * ltconfig, ltmain.sh, libtool.m4, ltcf-c.sh, ltcf-cxx.sh,
2907 ltcf-gcj.sh: Upgraded to libtool 1.4a 1.641.2.226.
2911 * Makefile.in (CXX_FOR_TARGET_FOR_RECURSIVE_MAKE, RECURSE_FLAGS):
2913 (bootstrap, cross): Use RECURSE_FLAGS.
2914 * configure.in: Subst CXX_FOR_TARGET_FOR_RECURSIVE_MAKE.
2918 * configure.in (CXX_FOR_TARGET): Use xgcc for libstdc++-v3.
2922 * README-maintainer-mode: Add note about inability to use "make
2923 distclean" in maintainer mode.
2929 * ltcf-c.sh: Clear ac_cv_prog_cc_pic for DJGPP. Do not add
2930 '-DPIC' to ac_cv_prog_cc_pic for DJGPP.
2931 * ltcf-cxx.sh: Likewise.
2932 * ltcf-gcj.sh: Likewise.
2936 * config.sub, config.guess: Import latest from subversions.
2940 * ltconfig, ltmain.sh, libtool.m4, ltcf-c.sh, ltcf-cxx.sh,
2941 ltcf-gcj.sh: Upgraded to libtool 1.4a 1.641.2.198.
2945 * Makefile.in: all-m4 depends on all-texinfo.
2949 * Makefile.in (ALL_GCC, ALL_GCC_C, ALL_GCC_CXX): Set before use.
2953 * COPYING.NEWLIB: Remove DJ Delorie's address because it is no
2958 * configure.in (noconfigdirs): Allow configuration of texinfo
2963 * config.guess: Add linux target for S/390.
2964 * config.sub: Likewise.
2965 * configure.in: Likewise.
2969 * configure: Output host type to stdout, not stderr.
2973 * config.guess: Import from subversions.gnu.org (revision 1.181).
2974 * config.sub: Import from subversions.gnu.org (revision 1.199).
2978 * config.guess: Handle hppa64-linux systems.
2982 * ltcf-cxx.sh (ac_cv_prog_cc_pic_works, ac_cv_prog_cc_static_works):
2983 Don't unset, it's non-portable and no longer necessary, set to empty
2988 * ltconfig: Shell portability fix for the tagname validity check.
2992 * ltcf-cxx.sh: Use parentheses around eval $ac_compile.
2996 * ltcf-c.sh (ld_shlibs) [aix5*]: Disable on unknown CPU types.
2997 * ltcf-cxx.sh, ltcf-gcj.sh: Likewise.
3001 * ltmain.sh (TAG disable-shared, TAG disable-static): Make sure we
3002 keep at least one of build_libtool_libs or build_old_libs set to
3007 * ltcf-gcj.sh (lt_simple_link_test_code): Remove stray `(0)'.
3008 * libtool.m4 (_AC_LIBTOOL_GCJ): Pass $CPPFLAGS on.
3012 * Makefile.in (ETC_SUPPORT): Also add configbuild.* and configdev.*.
3016 * Makefile.in (ETC_SUPPORT): Add configure.texi and associated info
3021 * COPYING.NEWLIB: Put into source repository.
3025 * configure.in (host_tools): Add sid.
3026 Always configure cgen.
3027 * Makefile.in (all-sid): New target.
3028 (check-sid, clean-sid, install-sid): Likewise.
3032 * config.sub, config.guess: Update from subversions.
3036 * configure.in: Disable language-specific target libraries for
3037 languages that aren't enabled.
3041 * configure.in (xscale-elf): Add target.
3042 (xscale-coff): Add target.
3043 (c4x, c5x, tic54x): Move after ARM targets.
3047 * ltcf-gcj.sh: Added file, required by 2000-11-18 merge.
3051 * ltcf-cxx.sh: Added file, required by 2000-11-18 merge.
3055 * Makefile.in: Merge with GCC and libgcj.
3056 (ALL_GCC_C, ALL_GCC_CXX): New macros. Use them as dependencies of
3057 configure-target-<library> when their configure scripts need the C
3058 or C++ library to have already been built to work properly.
3059 (do_proto_toplev): Set them to an empty string.
3063 * Makefile.in (HOST_LIB_PATH, TARGET_LIB_PATH): New macros.
3064 (REALLY_SET_LIB_PATH): Use them.
3068 * config.sub: Add support for Sun Chorus
3072 * config.sub: Add support for the *-storm-chaos OS.
3076 * configure.in (noconfigdirs): Don't compile some
3077 of the libraries for 68HC11 & 68hc12 targets.
3081 * ltconfig, ltmain.sh, libtool.m4: Updated from libtool
3082 multi-language branch, to work around Solaris' /bin/sh bug. Rebuilt
3083 all affected `configure' scripts.
3087 * Makefile.in (DEVO_SUPPORT): Added gettext.m4, libtool.m4 and
3092 * config.sub, config.guess: Update from subversions.
3096 * Makefile.in (all-zlib): Added dummy target.
3098 * ltconfig, ltmain.sh, libtool.m4, ltcf-c.sh: Updated from libtool
3099 multi-language branch.
3103 * Makefile.in (all-bootstrap): Added all-texinfo and all-zlib.
3104 (bootstrap*): Depend on all-bootstrap.
3108 * configure.in (FLAGS_FOR_TARGET): Use -nostdinc even for Canadian
3109 crosses, but add gcc/include to the header search path for them.
3113 * ltconfig, ltmain.sh: Updated from libtool multi-language branch.
3114 * libtool.m4, ltcf-c.sh: Copied from libtool multi-language branch.
3115 * gettext.m4: New file, extracted from aclocal.m4.
3119 * config-ml.in (CC, CXX): Avoid trailing whitespace.
3120 (LD_LIBRARY_PATH, SHLIB_PATH): Adjust for multilibs and export to
3125 * Makefile.in (ALL_MODULES): Add all-cgen.
3126 (CROSS_CHECK_MODULES,INSTALL_MODULES,CLEAN_MODULES): Similarily.
3127 (all-cgen): New target.
3128 (all-opcodes,all-sim): Depend on all-cgen.
3129 * configure.in (host_tools): Add cgen.
3130 Only configure cgen if --enable-cgen-maint.
3134 * config-ml.in (CC, CXX): Don't introduce a leading space.
3138 * configure.in (libstdcxx_flags): Use
3139 libstdc++-v3/src/libstdc++.INC.
3143 * configure.in (libstdcxx_flags): Use libstdc++-v3/src/INCLUDES.
3147 * configure.in (CC_FOR_TARGET, CHILL_FOR_TARGET,
3148 CXX_FOR_TARGET): Add -B$$r/gcc/ here.
3149 (FLAGS_FOR_TARGET): Not here.
3150 (CHILL_FOR_TARGET, CXX_FOR_TARGET): Don't check the list of languages.
3154 * configure.in (FLAGS_FOR_TARGET): invert test for xgcc, should mean
3155 "if we're also building gcc, and it's a gcc that will run on the
3156 build machine, we want to use its includes instead of the system's
3161 * configure.in (libstdcxx_flags): Don't use `"'.
3163 * config-ml.in: Adjust multilib search paths to the
3164 appropriate multilib tree.
3168 * configure.in (CHILL_FOR_TARGET, CXX_FOR_TARGET): Convert blanks to
3169 commas in $LANGUAGES.
3173 * configure.in (qCXX_FOR_TARGET): Use echo instead of expr.
3177 * configure.in (qCXX_FOR_TARGET): Quote `&' characters in
3178 CXX_FOR_TARGET for sed.
3182 * configure.in (CC_FOR_TARGET, CHILL_FOR_TARGET, CXX_FOR_TARGET):
3183 Do not override if already set in the environment or in configure.
3184 Don't duplicate $(FLAGS_FOR_TARGET) if it already appears in them.
3185 (FLAGS_FOR_TARGET): Don't use host directories on Canadian crosses.
3189 * Makefile.in (FLAGS_FOR_TARGET): New macro.
3190 (GCC_FOR_TARGET): Use it.
3191 (CC_FOR_TARGET, CXX_FOR_TARGET, CHILL_FOR_TARGET): Now defined...
3192 * configure.in: ... here.
3193 (FLAGS_FOR_TARGET): Define. Add ld build dir to -L path.
3194 (libstdcxx_flags): Define and append to CXX_FOR_TARGET.
3198 * Makefile.in (configure-target-libf2c): Depend on $(ALL_GCC).
3199 (configure-target-libchill, configure-target-libobjc): Likewise.
3201 * configure.in: Use the same cache file for all target libs.
3202 * config-ml.in: But different cache files per multilib variant.
3206 * configure (topsrcdir): Don't use dirname.
3210 * configure.in: Remove all references to libg++ and librx.
3212 * configure, configure.in, Makefile.in: Unify gcc and binutils.
3216 * config.sub: Update to subversions version 2000-07-06.
3220 * configure.in (host_makefile_frag): Use mh-ia64pic on IA-64 hosts.
3221 (target_makefile_frag): Use mt-ia64pic on IA-64 targets.
3225 * symlink-tree: Check number of arguments.
3229 * texinfo/texinfo.tex: Update to version 2000-05-28.15.
3233 * Makefile.in (CXX_FOR_TARGET): Add libstdc++ to the library
3234 search path for a g++ extracted from the build tree. This
3235 will allow link tests run by configure scripts in
3236 subdirectories to succeed.
3240 * ltconfig: Add support for mips-dde-sysv4.2MP
3244 * ltconfig: Check for host_os beeing one of `cygwin', `mingw' or
3245 `os2'. Force ac_cv_exeext to be ".exe" in that case.
3249 * configure.in (noconfigdirs): Set noconfigdirs for tic54x target.
3250 * config.sub: Add tic54x target.
3254 * README-maintainer-mode: New file: Contains notes on using
3255 --enable-maintainer-mode with binutils.
3259 * texinfo/texinfo.tex: Update. Version from makeinfo 4.0.
3263 * config.sub: Import CVS version 1.167 Tue May 30 09:00:07 2000.
3264 * config.guess: Import CVS version 1.148 Tue May 30 09:00:06 2000
3268 * Makefile.in (CC_FOR_TARGET): Make sure as/ld in the gcc
3269 directory are used if they exist. Make sure
3270 $(build_tooldir)/include is searched for header files,
3271 $(build_tooldir)/lib/ for library files.
3272 (GCC_FOR_TARGET): Likewise.
3273 (CXX_FOR_TARGET): Likewise.
3277 * configure.in (hppa*64*-*-*): Do build ld for this configuration.
3281 * Makefile.in (configure-target-libiberty): Depend on
3282 configure-target-newlib.
3286 * configure.in, Makefile.in: Merge all libffi-related
3287 configury stuff from the libgcj tree.
3292 * Makefile.in (do-tar-bz2, do-md5sum): Skip CVS directories.
3297 * Makefile.in (do-djunpack): New target. Update djunpack.bat with
3298 current version information. Add to proto-toplev directory.
3299 (gdb-taz): Build do-djunpack.
3303 * configure.in: Special case powerpc*-*-aix* target_makefile_frag.
3307 * ltmain.sh: Preserve in relink_command any environment
3308 variables that may affect the linker behavior.
3312 * config.sub (basic_machine): Recognize hppa64 as a valid cpu type.
3316 * configure.in (ia64*-*-elf*): Add gdb and friends to noconfigdirs.
3320 * djunpack.bat: Change the Sed script to replace @V@ in fnchange.lst
3321 with the version name.
3329 * djunpack.bat: New file.
3333 * Makefile.in (taz, gdb-taz, gas.tar.bz2, binutils.tar.bz2,
3334 gas+binutils.tar.bz2, libg++.tar.bz2, gnats.tar.bz2, gdb.tar.bz2,
3335 dejagnu.tar.bz2, gdb+dejagnu.tar.bz2, insight.tar.bz2,
3336 insight+dejagnu.tar.bz2, newlib.tar.bz2): Pass MD5PROG to sub-make.
3340 * config.sub (case $basic_machine): Change default for "ibm-*"
3345 * Makefile.in (gdb-taz): New target. GDB specific archive.
3346 (do-md5sum): New target.
3348 (PACKAGE): Default to TOOL.
3349 (VER): Default to a shell script.
3350 (taz): Rewrite target. Move real work to do-proto-toplev. Include
3351 md5 checksum generation.
3352 (do-proto-toplev): New target. Create $(PACKAGE)-$(VER) link.
3353 (do-tar-bz2): Delete creation of $(PACKAGE)-$(VER) link.
3354 (gdb.tar.bz2, dejagnu.tar.bz2, gdb+dejagnu.tar.bz2,
3355 insight.tar.bz2): Use gdb-taz to create archive.
3359 * configure (warn_cflags): Delete.
3364 * configure.in (enable_libstdcxx_v3): Add.
3365 (target_libs): Add bits here to switch between libstdc++-v2 and
3367 * config.if: And this file too.
3368 * Makefile.in: Add libstdc++-v3 targets.
3372 * config.sub (d30v): Add d30v as a basic machine type.
3376 * configure.in: -linux-gnu*, not -linux-gnu.
3380 * Makefile.in (taz): Set PACKAGE to TOOL when not defined.
3381 (do-tar-bz2): Replace TOOL with PACKAGE.
3382 (gdb.tar.bz2): Remove GDBTK from GDB package.
3383 (gdb+dejagnu.tar.bz2, insight.tar.bz2, insight+dejagnu.tar.bz2,
3384 dejagnu.tar.bz2): New packages.
3388 * configure.in: Add entry for mips*-*-linux*, move catch all
3389 *-*-*linux* entry below this one.
3393 * ltconfig, ltmain.sh: Update to libtool 1.3.4.
3397 * config.sub: Support an OS of "wince".
3401 * config.guess, config.sub: Updated to match config's 2000-02-15
3406 * config.sub: Add support for Linux/IBM 370.
3407 * configure.in: Likewise.
3411 * configure.in: Add mips-pe, sh-pe and arm-wince-pe targets.
3415 * config.guess: Guess "cygwin" rather than "cygwin32".
3419 * configure (gcc_version): When setting, narrow search to
3420 lines containing `version_string'.
3424 * config.sub: Add support for avr target.
3428 * config.sub: Add mmix-knuth-mmixware.
3432 * Makefile.in (CC_FOR_TARGET): Add new winsup directory
3433 structure stuff to -L library search.
3434 (CXX_FOR_TARGET): Ditto.
3435 (CROSS_CHECK_MODULES): Fix spelling mistake.
3439 * Makefile.in (CXX_FOR_TARGET): Use g++, not xgcc, to invoke
3444 * configure.in: Don't build some bits for beos.
3448 * Makefile.in (CC_FOR_TARGET): Use newlib libraries as well
3453 * configure.in: Use mt-aix43 to handle *_TARGET defs,
3458 * config.guess (alpha-osf, alpha-linux): Detect ev67.
3459 * config.sub: Accept alphaev[78], alphaev8.
3463 * config.guess, config.sub: Update from autoconf.
3467 * config-ml.in (sparc*-*-*): Disable sparcv9 support if the
3468 necessary libraries are missing.
3472 * configure: Fix quoting inside arguments of eval.
3476 * config-ml.in: Allow suppression of some ARM multilibs.
3480 * config.guess: Add OS/390 match pattern.
3481 * config.sub: Add mvs, openedition targets.
3482 * configure.in (i370-ibm-opened*): New.
3486 * config.sub: Add support for configuring for pj.
3490 * config.sub (maybe_os): Add support for configuring for fr30.
3494 * configure.in: Do not configure or build ld for AIX
3495 platforms. ld is known to be broken on these platforms.
3499 * config-ml.in: Pass compiler flag corresponding to multidirs to
3504 * Makefile.in (LDFLAGS): Define.
3508 * configure.in (i[3456]-*-mingw32*): Don't put gprof in
3510 (*-*-cygwin*): Likewise.
3515 * Makefile.in (GAS_SUPPORT_DIRS): Add mkdep.
3516 (BINUTILS_SUPPORT_DIRS): Add mkdep.
3519 * configure (tmpfile): Change cONf$$ to cNf$$ to avoid an overly
3520 long file name when using DJGPP on MS-DOS.
3524 * config.sub (vxworks case): Use os=-vxworks, not os=vxworks.
3528 * Makefile.in (check-target-libio): Remove all-target-libstdc++
3529 dependency as this causes "make check" to globally "make all"
3533 * configure.in (target_libs): Added target-zlib.
3534 * Makefile.in (ALL_TARGET_MODULES): Added zlib.
3535 (CONFIGURE_TARGET_MODULES): Likewise.
3536 (CHECK_TARGET_MODULES): Likewise.
3537 (INSTALL_TARGET_MODULES): Likewise.
3538 (CLEAN_TARGET_MODULES): Likewise.
3539 (configure-target-zlib): New target.
3540 (all-target-zlib): Likewise.
3541 (all-target-libjava): Depend on all-target-zlib.
3542 (configure-target-libjava): Depend on configure-target-zlib.
3544 * Makefile.in (configure-target-libjava): Depend on
3545 configure-target-newlib.
3546 (configure-target-boehm-gc): New target.
3547 (configure-target-qthreads): New target.
3549 * configure.in (target_libs): Added target-qthreads.
3550 * Makefile.in (ALL_TARGET_MODULES): Added qthreads.
3551 (CONFIGURE_TARGET_MODULES): Likewise.
3552 (CHECK_TARGET_MODULES): Likewise.
3553 (INSTALL_TARGET_MODULES): Likewise.
3554 (CLEAN_TARGET_MODULES): Likewise.
3555 (all-target-qthreads): New target.
3556 (configure-target-libjava): Depend on configure-target-qthreads.
3557 (all-target-libjava): Depend on all-target-qthreads.
3559 * Makefile.in (ALL_TARGET_MODULES): Added libjava, boehm-gc.
3560 (CONFIGURE_TARGET_MODULES): Likewise.
3561 (CHECK_TARGET_MODULES): Likewise.
3562 (INSTALL_TARGET_MODULES): Likewise.
3563 (CLEAN_TARGET_MODULES): Likewise.
3564 (all-target-libjava): New target.
3565 (all-target-boehm-gc): Likewise.
3566 * configure.in (target_libs): Added libjava, boehm-gc.
3570 * Makefile.in (binutils.tar.bz2): Don't pass makeall.bat and
3571 configure.bat in SUPPORT_FILES.
3572 (gas+binutils.tar.bz2): Likewise.
3574 * makeall.bat: Remove; obsolete.
3579 * configure.bat: Remove; obsolete.
3583 * configure: Add -W -Wall to the default CFLAGS when compiling with
3588 * configure.in: Build ld, binutils & gas for hppa*-*-linux-gnu*.
3592 * configure.in: Build ld on IRIX6.
3596 * Makefile.in: Change distribution targets to use bzip2 instead of
3598 (TEXINFO_SUPPORT): Set to just texinfo/texinfo.tex.
3599 (taz): Don't use texinfo/gpl.texinfo or texinfo/lgpl.texinfo.
3603 * config.sub: Add mcore target.
3607 * config.guess (ppc-*-linux-gnu): Also use ld emul elf32ppclinux.
3611 * config.guess (dummy): Changed to $dummy.
3615 * config.sub: Tidied up case statements.
3619 * config.guess: Handle NEC UX/4800. Contributed by Jiro Takabatake
3622 * config.guess: Merge with FSF version. Future changes will be
3623 more accurately recorded in this ChangeLog.
3624 * config.sub: Likewise.
3628 * Makefile.in (GCC_FOR_TARGET): Add -I$(build_tooldir)/include.
3632 * ltmain.sh: [mode link] Always use CC given by ltconfig.
3636 * ltconfig, ltmain.sh: Update to libtool 1.2f.
3640 * configure.in (noconfigdirs): Don't build libstub for arm-elf targets.
3641 (noconfigdirs): Don't build any bsp stuff for for arm-oabi targets.
3642 Bad merge removed these two changes.
3647 * config.guess (interix Alpha): Add.
3651 * configure.in (i?86-*-beos*): Do config gperf; don't config
3652 gdb, newlib, or libgloss.
3656 * config-ml.in: On mips*-*-*, if multidirs contains mabi=64, try to
3657 link a trivial program with -mabi=64. If it fails, remove mabi=64
3662 * config.sub: Set basic_machine to i586 when target_alias = k6-*.
3666 * config.sub: Add support for mcore targets.
3670 * configure.in (d30v-*): Use config/mt-d30v as makefile fragment,
3671 not mt-ospace, in order to shut up assembler warning about using
3672 symbols that are named the same as registers.
3676 * Makefile.in (all-target-cygmon): Added all-target-bsp to the
3677 dependency list for all-target-cygmon.
3681 * config-ml.in: Check $host, not $target, for selective multilibs.
3682 (arm-*-*): Allow disabling of biendian, h/w fp, 26 bit apcs,
3683 thumb interworking, and underscore prefix multilibs.
3687 * missing: Update to version from current automake.
3691 * configure (gxx_include_dir): Removed.
3693 * configure.in (gxx_include_dir): Handle it.
3694 * Makefile.in: Likewise.
3698 * config.sub (mips64vr4111,mips64vr4111el) Add.
3702 * config.guess: Correct typo for detecting ELF on FreeBSD.
3706 * configure.in (pc-msdosdjgpp): Set host_makefile_frag to
3711 * Makefile.in (all-target-bsp): Added all-gcc all-binutils and
3712 all-target-newlib to dependency list for all-target-bsp.
3716 * config.sub: Add i386-uwin support.
3717 * config.guess: Likewise.
3721 * configure.in: cleanup, add mh-*pic handling for arm, special
3722 case powerpc*-*-aix*
3726 * configure.in (noconfigdirs): Removed target-libgloss so libnosys.a
3731 * configure.in: Added bsp support to arm-*-coff and arm-*-elf
3736 * config.sub: Rename CYGNUS LOCAL to EGCS LOCAL
3740 * config.sub: Check for "cygwin*" rather than "cygwin32*"
3744 * config.sub: Fix typo in arm recognition.
3748 * configure.in (noconfigdirs): Changed target_configdirs to
3749 include target-bsp only for m68k-*-elf* and m68k-*-coff*
3750 rather than m68k-*-* since it is not known to work on
3751 m68k-aout. Ditto for arm-*-*oabi.
3755 * configure.in (*-*-windows*): Remove, no longer used.
3759 * config.guess: Automatically recognise ELF on FreeBSD. From Niall
3760 Smart and improved by Andrew Cagney.
3764 * config.guess: Recognize openbsd-*-hppa.
3768 * Makefile.in (REALLY_SET_LIB_PATH): Append $$$(RPATH_ENVVAR)
3769 only if it is not empty.
3775 * config.guess: Modified to recognize uname's armv* syntax.
3777 * config.sub: Modified to recognize uname's armv* syntax.
3781 * configure.in: Added target-bsp for sparclite.
3785 * config.sub: Recognize alphapca5[67] and up to alphaev8.
3789 * configure.in: Add support for strongarm port.
3790 * config.sub: Add support for strongarm target.
3794 * configure.in (*-*-cygwin32*): Use config/mh-cygwin instead of
3795 the old name config/mh-cygwin32.
3800 * configure.in: Do build ld for ix86 Solaris.
3804 * Makefile.in (EXTRA_GCC_FLAGS): Set AR to $AR instead of
3805 $AR_FOR_TARGET. Likewise for RANLIB.
3809 * config.sub (oabi): Recognize.
3810 * configure.in (arm-*-oabi): Handle.
3814 * config.guess: Improve detection of i686 on UnixWare 7.
3818 * config.guess: Add support for i386-pc-interix.
3819 * config.sub: Likewise.
3820 * configure.in: Likewise.
3824 * Makefile.in: Remove unneeded all-target-libio from
3825 from all-target-winsup target since it is now unneeded.
3826 Add all-target-libtermcap in its place since it is now
3831 * configure.in: makefile stub for cygwin target is probably
3832 unnecessary. Remove it for now.
3836 * configure.in: libtermcap.a should be built when cygwin is the
3837 target as well as the host.
3838 * config.guess: Allow mixed case in cygwin uname output.
3839 * Makefile.in: Add libtermcap target.
3843 * config.sub: Clean up handling of hppa2.0.
3847 * config.guess: Use C code to identify more HP machines.
3851 * config.sub: Handle hppa2.0.
3855 * configure.in: Add cygmon for x86-coff and x86-elf. Configure
3856 cygmon for all sparclite targets, regardless of object format.
3860 * configure.in: Added target-bsp for several target architectures.
3862 * Makefile.in: Added rules for bsp.
3866 * config.guess: Improve detection of hppa2.0 processors.
3870 * config.guess: Recognize FreeBSD using ELF automatically.
3874 * configure (skip-this-dir): Add handling for new shell script, which
3875 might be created by a sub-directory's configure to indicate, this particular
3876 directory is "unwanted".
3877 * Makefile.in ($(CONFIGURE_TARGET_MODULES)): Likewise.
3881 * ltconfig: import from libtool, after changing libtool to
3882 account for the cygwin name change.
3886 * Makefile.in: CC_FOR_TARGET and CXX_FOR_TARGET should also
3887 include newlib/libc/sys/cygwin and newlib/libc/sys/cygwin32.
3891 * configure.in: Add libtermcap to list of cygwin dependencies.
3895 * Makefile.in: modify CC_FOR_TARGET and CXX_FOR_TARGET so that
3896 they include winsup/include when it's a cygwin target.
3900 * configure.in (host_tools): Added zip.
3901 * Makefile.in (all-target-libjava): Depend on all-zip.
3902 (all-zip): New target.
3903 (ALL_MODULES): Added all-zip.
3904 (NATIVE_CHECK_MODULES): Added check-zip.
3905 (INSTALL_MODULES): Added install-zip.
3906 (CLEAN_MODULES): Added clean-zip.
3910 * Makefile.in: lose "32" from comment about cygwin.
3914 * configure.in: Use -Os to build target libraries for the fr30.
3918 * config.sub: Add fr30.
3922 * configure.in: drop "32" from config/mh-cygwin32. Check
3923 cygwin* instead of cygwin32*.
3924 * config.sub: Check cygwin* instead of cygwin32*.
3928 * config.guess: Match any version of Unixware7.
3932 * Makefile.in configure.in: Add the ability to use tcl8.1 and tk8.1
3937 * config.if (cxx_interface, libstdcxx_interface): Do not try to set
3938 these if the appropriate directories and files to not exist.
3942 * Makefile.in (DEVO_SUPPORT): Add config.if.
3946 * configure: Add pattern to replace "build_tooldir"'s
3947 definition in the generated Makefile with "tooldir"'s
3952 * config.sub: Bring back lost sparcv9.
3954 * Makefile.in (all-snvavigator): Remove all-flexlm dependency.
3958 * Makefile.in (CHILL_FOR_TARGET): Mirror recent changes to
3959 CC_FOR_TARGET and friends.
3963 * Makefile.in (build_tooldir): New variable, same as tooldir.
3964 (CC_FOR_TARGET, GCC_FOR_TARGET, CXX_FOR_TARGET): Add
3965 -B$(build_tooldir)/bin/.
3966 (BASE_FLAGS_TO_PASS): Pass build_tooldir down.
3970 * config.sub: Add support for i[34567]86-pc-udk.
3971 * configure.in: Likewise.
3975 * Makefile.in: add bzip2 package building bits for user
3977 * configure.in: ditto
3981 * Makefile.in (TARGET_CONFIGDIRS): Add libobjc.
3982 (ALL_TARGET_MODULES): Add all-target-libobjc.
3983 (CONFIGURE_TARGET_MODULES, CHECK_TARGET_MODULES): Similarly.
3984 (INSTALL_TARGET_MODULES, CLEAN_TARGET_MODULES): Similarly.
3985 (all-target-libchill): Add dependencies.
3986 * configure.in (target_libs): Add libchill.
3990 * configure.in (target_subdir): Remove duplicate line.
3994 * Makefile.in (all-automake): fix dependencies.
3998 * configure.in: Minor cleanups for building in the $(target_alias)
4003 * Makefile.in (bootstrap): Set r and s before make all. Use
4004 BASE_FLAGS_TO_PASS in make all.
4009 * Makefile.in (bootstrap): Pass TARGET_FLAGS_TO_PASS to `make all'.
4013 * config.sub: Fix typo in last change.
4017 * config.sub: Add support for C4x target.
4018 * configure.in: Likewise.
4022 * config.sub: Recognize sparcv9 just like sparc64.
4026 * config.guess: Match "Pent II" or "PentII" for OpenServer.
4030 * config.guess: Correctly identify Pentium II sco boxes.
4032 * config.guess: Fix "tr" code. From Weiwen Liu.
4036 * configure.in: Do not assume x86-svr4 or x86-unixware can handle
4041 * Makefile.in (TARGET_CONFIGDIRS): Add libchill.
4042 (ALL_TARGET_MODULES): Add all-target-libchill.
4043 (CONFIGURE_TARGET_MODULES, CHECK_TARGET_MODULES): Similarly.
4044 (INSTALL_TARGET_MODULES, CLEAN_TARGET_MODULES): Similarly.
4045 (all-target-libchill): Add dependencies.
4046 * configure.in (target_libs): Add libchill.
4050 * config.guess: Avoid assumptions about "tr" behaves when
4051 LANG is set to something other than English.
4055 * configure (gxx_include_dir): Changed to
4056 '${prefix}/include/g++'-${libstdcxx_interface}.
4058 * config.if: New to determine the interfaces.
4062 * config.guess: Detect and handle MPE/IX.
4063 * config.sub: Deal with MPE/IX.
4067 * configure.in: Use mh-aix43.
4071 * configure: Fix --without/--disable cases for gxx-include-dir.
4075 * mdata-sh: Imported. Needed for automake support.
4079 * Makefile.in (taz): Try "chmod -R og=u ." before
4080 "chmod og=u `find . -print`".
4084 * configure.in: Add arm-elf and thumb-elf support.
4088 * Makefile.in: Undo previous patch.
4092 * Makefile.in (INSTALL_TARGET): Move EXTRA_TARGET_HOST_INSTALL_MODULES
4094 (install-no-fixedincludes): and here
4095 (INSTALL_MODULES): ... from here.
4099 * config.sub: Merge with FSF.
4101 * config.guess: Merge with FSF.
4105 * configure (extraconfigdirs): New variable.
4106 (SUBDIRS): Add extraconfigdirs and recurse on them too.
4107 * Makefile.in (all): Move higher in file.
4108 (EXTRA_TARGET_HOST_ALL_MODULES): New variable.
4109 (EXTRA_TARGET_HOST_{INSTALL,CHECK}_MODULES): New variables.
4110 (ALL_MODULES): Add EXTRA_TARGET_HOST_ALL_MODULES.
4111 (CROSS_CHECK_MODULES): Add EXTRA_TARGET_HOST_CHECK_MODULES.
4112 (INSTALL_MODULES): Add EXTRA_TARGET_HOST_INSTALL_MODULES.
4116 * Makefile.in (all-target-libjava): Depend on all-gcc and
4118 (configure-target-libjava): Depend on $(ALL_GCC).
4122 * config.guess: (*-pc-sco3.2v5) Add detection for Pentium II.
4123 (*-pc-unixware7) Add detection for Pentium II, Pentium Pro.
4127 * ylwrap: Change absolute path checks to check for DOS style path
4130 * ylwrap: Don't use a full path name if the source file is in the
4133 * config-ml.in: Default to being verbose, to match Feb 18 change to
4138 Brought over from egcs:
4142 * configure.in (target_subdir): Set to ${target_alias} instead
4147 * configure.in (target_subdir): Set to libraries if enable_multilib.
4151 * Makefile.in ($(CONFIGURE_TARGET_MODULES)): If there are any
4152 multilibs, force reconfiguration the first time we create
4153 multilib.out in a subdirectory, in case TARGET_SUBDIR is `.'.
4157 * configure.in: Strip any --no option from CONFIG_ARGUMENTS, to
4158 avoid confusion with --no-recursion.
4162 * configure.in: Win32 hosts shouldn't use install -x
4163 * install-sh: remove -x option, and special .exe-handling
4168 * config.guess: Recognize i586-pc-beos.
4169 * configure.in: Don't build some bits for beos.
4173 * configure: If CC is set but CFLAGS is not, and CC is gcc, make
4174 CFLAGS default to -O2.
4176 * ltmain.sh: Add some hacks to make SunOS --enable-shared work
4181 * ltmain.sh: Correct install when using a different shell.
4185 * ltconfig, ltmain.sh: Update to libtool 1.2b.
4189 * makefile.vms: Update to build binutils/makefile.vms. Add install
4194 * ltconfig: Update to correct AIX handling.
4198 * Makefile.in (BASE_FLAGS_TO_PASS): Add TARGET_SUBDIR.
4200 * configure.in (target_subdir): Set to ${target_alias} instead
4205 * Makefile.in (BASE_FLAGS_TO_PASS): Add gcc_version_trigger.
4206 (Makefile): Depend on $(gcc_version_trigger).
4208 * configure (gcc_version): Change default initializer to empty
4210 (gcc_version_trigger): New variable; pass this variable down
4211 to subdir configures to enable them checking gcc's version
4212 themselves. Emit make macros for both gcc_version vars.
4213 (topsrcdir): Initialize reliably.
4214 (recursion line): Remove --with-gcc-version=${gcc_version}.
4218 * configure (enable_version_specific_runtime_libs): Implement new flag
4219 --enable-version-specific-runtime-libs which installs C++ runtime stuff
4220 in $(libsubdir); emit definition in each generated Makefile.
4221 (gxx_include_dir): Initialize depending on
4222 $enable_version_specific_runtime_libs.
4226 * configure (gcc_version): Initialize properly depending on
4227 how and where configure is started.
4228 (recursion line): Pass a --with-gcc-version=${gcc_version}
4229 to configures in subdirs.
4233 * configure.in (noconfigdirs): Add configure pattern for mips tx39
4238 * configure.in: Add cygmon and libstub support for mn10200.
4242 * configure (gcc_version): Add new variable describing the
4243 particular gcc version we're building.
4244 * Makefile.in (libsubdir): Add new macro for the directory
4245 in which the compiler finds executables, libraries, etc.
4246 (BASE_FLAGS_TO_PASS): Pass down gcc_version, target_alias
4251 * Makefile.in (local-clean): Remove *.log.
4252 (warning.log): Built with warn_summary from build.log.
4253 (mail-report.log): Run test_summary.
4254 (mail-report-with-warnings.log): Run test_summary including
4255 warning.log in the report.
4259 * config.guess: Detection of Pentium II for *-sco-3.2v5*.
4263 * Makefile.in (grep): Grep no longer depends on libiberty.
4267 * Makefile.in: all-snavigator needs all-libgui.
4271 * configure.in: Add cygmon and libstub support for mn10300.
4275 * missing: Update to version from automake 1.3.
4277 * ltmain.sh: On installation, don't get confused if the same name
4278 appears more than once in the list of library names.
4282 * config.sub: Accept m68060 and m5200 as CPU names.
4286 * configure: Use && rather than using -a in test, because odd
4287 strings can confuse test.
4288 * configure.in: Likewise.
4292 * ltconfig, ltmain.sh: Bring in Visual C++ support.
4296 * Makefile.in (boostrap2-lean, bootstrap3-lean,
4297 bootstrap4-lean): New targets.
4301 * mpw-* Delete. Not used.
4305 * COPYING.LIB: Update FSF address.
4309 * ltconfig, ltmain.sh: Update to libtool 1.2a.
4311 * Makefile.in (GASB_SUPPORT_DIRS): Remove intl; already included via
4316 * ltconfig, ltmain.sh: Avoid producing a version number if
4317 -version-info was not used.
4321 * configure.in: Add --with-newlib to CONFIG_ARGUMENTS if we are
4322 building with newlib.
4326 * Makefile.in (EXTRA_GCC_FLAGS): Remove backslash at end;
4327 Solaris `make' causes it to continue to next definition.
4331 * Makefile.in (install-gdbtk): Call this 'install-gdb' so that
4332 the right GUI libraries and files are installed along with GDB.
4336 * configure.in: Change alpha to alpha* in several places.
4340 * config.sub: Recognize sparc86x.
4344 * configure.in (--enable-target-optspace): Remove debug echo.
4348 * configure: Set CXXFLAGS from CXXFLAGS, not CFLAGS.
4352 * ltconfig: Update cygwin32 support.
4354 * Makefile.in (GAS_SUPPORT_DIRS): Add intl.
4355 (BINUTILS_SUPPORT_DIRS, GASB_SUPPORT_DIRS): Likewise.
4356 (GDB_SUPPORT_DIRS): Likewise.
4360 * configure.in (target_makefile_frag): If --enable-target-optspace,
4361 use -Os to compile target libraries rather than -O2. Default to
4362 using -Os for d10v and m32r if --{enable,disable}-target-optspace is
4364 * configure.in (target_cflags): Ditto for d30v.
4368 * Makefile.in (all-bfd): Depend on all-intl.
4369 (all-binutils): Likewise.
4370 (all-gas): Likewise.
4371 (all-gprof): Likewise.
4376 * configure.in (host_tools): Fix typo, lbtool -> libtool.
4380 * Makefile.in (all-bfd): Depend upon all-libiberty.
4382 * ltconfig, ltmain.sh: Bring in newer cygwin32 support.
4386 * Makefile.in: Add libstub.
4388 * configure.in: Ditto. Build libstub for targets that have cygmon
4393 * configure.in: Don't set PICFLAG on ix86-cygwin32.
4397 * configure.in: Recognise i[3456]96-*-sysv5* as a valid host, and
4398 use mh-sysv5 if specified. Support gprof on SCO Open Server.
4402 * configure: Define DEFAULT_M4 by searching PATH.
4403 * Makfile.in: Use DEFAULT_M4.
4407 * ltconfig: Add cygwin32 support.
4409 * Makefile.in, configure.in: Add libtool as a native only directory
4410 to configure and build.
4414 * Makefile.in (INSTALL_MODULES): Remove texinfo.
4418 * Makefile.in (EXTRA_GCC_FLAGS): XFOO lines shortened.
4422 * Makefile.in: add ash make rules
4423 * configure.in: add ash to native_only and host_tools lists
4427 * Makefile.in (all-gettext, all-intl): New targets.
4428 (ALL_MODULES): Added all-gettext, all-intl.
4429 (CROSS_CHECK_MODULES): Added check-gettext, check-intl.
4430 (INSTALL_MODULES): Added install-gettext, install-intl.
4431 (CLEAN_MODULES): Added clean-gettext, clean-intl.
4433 * configure.in (host_tools): Added gettext.
4434 (native_only): Likewise.
4435 (noconfigdirs) [various cases]: Likewise.
4436 (host_libs): Added intl.
4440 * configure: Do not disable building gdbtk for cygwin32 hosts.
4444 * configure.in: Add thumb-coff target.
4445 * config.sub: Add thumb-coff target.
4449 * Makefile.in: Revert yesterday's change.
4450 (all-target-winsup): all-target-librx stays out of here.
4454 * Makefile.in (TARGET_CONFIGDIRS, ALL_TARGET_MODULES,
4455 CONFIGURE_TARGET_MODULES, CHECK_TARGET_MODULES,
4456 INSTALL_TARGET_MODULES, CLEAN_TARGET_MODULES, all-target-winsup):
4457 Remove references to librx and libg++.
4461 * Makefile.in (BASE_FLAGS_TO_PASS): Pass $(lispdir) down to
4466 * Makefile.in (CC_FOR_TARGET): Use $(TARGET_SUBDIR) when passing -B
4467 for newlib directory.
4468 (CXX_FOR_TARGET): Likewise.
4472 * ltconfig: Update after libtool/ltconfig.in change for
4477 * ltconfig, ltmain.sh: Update to libtool 1.2.
4481 * Makefile.in (install-gcc): Don't specify LANGUAGES here.
4482 (install-gcc-cross): Instead, override LANGUAGES here.
4486 * Makefile.in ($(CONFIGURE_TARGET_MODULES)): Set CONFIG_SITE to a
4487 non-existent file since /dev/null loses with bash 2.0/autoconf 2.12.
4491 * configure.in: Add Thumb-pe target.
4495 * Makefile.in - changed sn targets to snavigator
4496 * configure.in - changed sn targets to snavigator
4500 * config-ml.in: After building symlink tree call make distclean
4501 if a Makefile got linked into ${ml_dir}/${ml_libdir}; this happens
4502 to be the case for libiberty.
4506 * configure: When making link, also check the current
4507 directory. The configure scripts may create one.
4511 * config.sub: Accept alphapca56 and alphaev6 properly.
4515 * configure.in: Revert 3 Jan change for powerpc-linux-gnulibc1.
4519 * config.sub (sco5): Fix typo.
4523 * Makefile.in (INSTALL_MODULES): Move install-tcl before
4525 (install-itcl): Remove dependency on install-tcl.
4529 * configure.in: Remove libgloss from noconfigdirs for MN10300.
4533 * configure.in: Don't build libgui for a cygwin32 target when not on
4538 * configure (redirect): Set to null, so default behavior of
4539 configure is now --verbose.
4543 * Makefile.in ($(CONFIGURE_TARGET_MODULES)): Run configure with
4544 CONFIG_SITE=/dev/null to forestall lossage with site configuration.
4548 * Makefile.in (BASE_FLAGS_TO_PASS, EXTRA_TARGET_FLAGS): Really add
4549 this change to sync Makefile.in with its ChangeLog entries.
4553 * ltmain.sh (mkdir): Check that the directory doesn't exist
4554 before we exit with error, so that we don't get races during
4559 * ltconfig, ltmain.sh: Update from libtool 1.0i.
4563 * Makefile.in (BASE_FLAGS_TO_PASS): Don't pass PICFLAG and
4565 (EXTRA_TARGET_FLAGS): Don't pass PICFLAG_FOR_TARGET.
4567 * configure: Emit a definition for the new macro enable_shared
4572 * configure.in (host_tools, native_only): Add libtool.
4576 * configure.in: add target-gperf to noconfigdirs for Cygwin32.
4577 Fix typo in ming config comment.
4581 * ltconfig, ltmain.sh: Update from libtool 1.0h.
4585 * config.sub: Add tic30 cases, and map c30 to tic30.
4589 * Makefile.in (TARGET_CONFIGDIRS): Add libf2c.
4590 (ALL_TARGET_MODULES, CONFIGURE_TARGET_MODULES): Similarly
4591 (CHECK_TARGET_MODULES, INSTALL_TARGET_MODULES): Similarly
4592 (CLEAN_TARGET_MODULES): Similarly
4593 (all-target-libf2c): Add dependences.
4594 * configure.in (target_libs): Add libf2c.
4598 * configure.in: Remove expect from noconfigdirs when target
4599 is cygwin32. OK to build expect and dejagnu with Canadian
4604 * configure.in: Do build expect, dejagnu, and cvssrc for a cygwin32
4607 * config.guess: Use ${UNAME_MACHINE} rather than i386 for cygwin32
4612 * Makefile.in (BASE_FLAGS_TO_PASS): Remove passing $(local_prefix)
4613 here as it is not defined in the toplevel Makefile.
4617 * configure (package_makefile_rules_frag): New variable, which names
4618 a file with generic rules, ...
4619 Change comment to mention we now have FIVE parts.
4620 * configure: Undo last change.
4624 * config.guess: More accurate determination of HP processor types.
4625 * config.sub: More accurate determination of HP processor types.
4629 * configure (package_makefile_frag): Move inserting the
4630 ${package_makefile_frag} to where it should be according
4635 * config.guess: Add support for Linux/ARM.
4639 * .cvsignore: Remove *-info and *-install since they match
4640 release-info and mpw-install, which we don't want to just ignore.
4644 * configure.in: Revert 3 Jan change for alpha-linux-gnulibc1.
4648 * Makefile.in (FLAGS_TO_PASS): Pass down gcc_include_dir and
4649 local_prefix to sub-make invocations.
4653 * configure.in: Check makefile fragments in the source
4658 * configure.in: Check whether host and target makefile
4659 fragments exist before adding them to *_makefile_frag.
4663 * configure.in (target_configdirs): Add cygmon for sparc64-elf.
4667 * configure.in: Make sure we only replace RPATH_ENVVAR on
4668 lines which begin with RPATH_ENVVAR, i.e. add "^" to the
4671 * Makefile.in (BASE_FLAGS_TO_PASS): Pass RRPATH_ENVVAR down
4676 * config-ml.in (multi-do): LDFLAGS must include multilib
4681 * config.guess: Recognize i[3456]-i586-UnixWare7-sysv5.
4685 * config.sub: Add mingw32 support.
4686 * configure.in: Likewise.
4690 * configure.in: Finalize support for {alpha|powerpc}*-*-linux-gnulibc1
4694 * Makefile.in (INSTALL_TARGET): Do install-gcc first.
4695 * configure (gxx_include_dir): Provide a definition for subdirs
4696 which do not use autoconf.
4700 * config.guess: Sync with egcs. Picks up new alpha support,
4701 BeOS & some additional linux support.
4705 * config.guess: HP 9000/803 is a PA1.1 machine.
4709 * configure.in: It's alpha*-...
4713 * configure.in (host_makefile_frag, target_makefile_frag):
4714 Handle multiple config files.
4715 (alpha-*-linux*): Treat alpha-*-linux* as alpha-*-linux* and
4724 * configure.in (d30v-*-*): Allow configuring of libide, vmake, etc.
4728 * Makefile.in: Add libgui directory.
4729 (GDB_TK): Add all-libgui.
4730 * configure.in: Add libgui directory.
4731 * configure: Add all-libgui to GDB_TK.
4735 * config-ml.in (multidirs): Add m32r to multilib list.
4739 * Makefile.in (all-target-gperf): Change dependency to
4740 all-target-libstdc++.
4744 * config.guess: Add BeOS support.
4748 Source directory cvs renamed to cvssrc:
4749 * configure.in (host_tools): Change cvs to cvssrc.
4750 (native_only): Likewise.
4751 (noconfigdirs) [various cases]: Likewise.
4752 * Makefile.in (ALL_MODULES): Change all-cvs to all-cvssrc.
4753 (CROSS_CHECK_MODULES): Change check-cvs to check-cvssrc.
4754 (INSTALL_MODULES): Change install-cvs to install-cvssrc.
4755 (CLEAN_MODULES): Change clean-cvs to clean-cvssrc.
4756 (all-cvssrc): Rename target from all-cvs.
4760 * configure (gxx_include_dir): Fix thinko.
4764 * Makefile.in (INSTALL_TARGET_CROSS): Define.
4765 (install-cross, install-gcc-cross): New targets.
4769 * configure.in (noconfigdirs): Add support for Thumb target.
4771 * config.sub (maybe_os): Add support for Thumb target.
4775 * Makefile.in: Add rules for cygmon.
4777 * configure.in: Build cygmon for sparc-elf and sparclite-aout.
4781 * Makefile.in (INSTALL_TARGET): Do install-gcc first.
4782 * configure (gxx_include_dir): Provide a definition for subdirs
4783 which do not use autoconf.
4787 * Makefile.in, configure, configure.in, ChangeLog: merge with foundry's
4793 * config.guess (powerpc*-*-linux): Handle glibc2 beta release
4794 found on RedHat Linux systems.
4798 * config.guess (alpha stuff): Merge with FSF to avoid incorrect
4803 * configure.in (i[3456]86-ncr-sysv4.3*): Tweak.
4807 * ltmain.sh: If mkdir fails, check whether the directory was created
4808 anyhow by some other process.
4812 * configure.in (d30v-*-*): Configure all directories.
4816 * configure.in (d30v-*-*): Configure newlib, libiberty directories
4821 * configure.in (d30v-*-*): Configure target-libgloss on the D30V.
4825 * include/libiberty.h: Add extern "C" { so it can be used with C++
4827 * include/remote-sim.h: Add extern "C" { so it can be used with C++
4832 * configure.in (d30v-*-*): Configure GCC now.
4836 * configure.in: Remove a "second pass" of tweaking noconfigdirs,
4837 is no longer needed.
4841 * Makefile.in: check-target-libio depends on all-target-libstdc++.
4845 * Makefile.in (bootstrap-lean): Combined with `normal' bootstrap
4846 targets using "$@" to provide support for similar but not identical
4847 targets without having to duplicate code.
4851 * makefile.vms: Fix to work with DEC C.
4855 * config.sub: Add mips-tx39-elf to marketing names.
4859 * ltmain.sh: Handle symlinks in generated script.
4863 * configure: Handle autoconf style directory options: --bindir,
4864 --datadir, --includedir, --infodir, --libdir, --libexecdir,
4865 --mandir, --oldincludedir, --sbindir, --sharedstatedir,
4867 * Makefile.in (sbindir, libexecdir, sysconfdir): New variables.
4868 (sharedstatedir, localstatedir, oldincludedir): New variables.
4869 (BASE_FLAGS_TO_PASS): Pass down bindir, datadir, includedir,
4870 infodir, libdir, libexecdir, localstatedir, mandir, oldincludedir,
4871 sbindir, sharedstatedir, and sysconfdir.
4875 * Makefile.in (bootstrap-lean): New target.
4879 * configure.in (d30v): Remove tcl, tk, expect, gdb, itcl, tix, db,
4880 sn, and gnuserv from noconfigdirs.
4884 * ltmain.sh: Tweak shell pattern to avoid bug in NetBSD /bin/sh.
4888 * Makefile.in (cross): New target.
4893 * Makefile.in (bootstrap2, bootstrap3): New targets.
4894 (all-bootstrap): Remove outdated and confusing target.
4895 (bootstrap, bootstrap2, bootstrap3): Don't pass BOOT_CFLAGS down.
4899 * configure (tooldir): enable_gdbtk=YES for cygwin32, NO for
4900 windows. Consistent with gdb/configure.
4904 * configure.in: Name Linux target fragment.
4906 * configure: Rewrite so that project Makefile fragment is inserted
4907 first and appears last in the resulting Makefile.
4911 * Makefile.in (install-itcl): Install tcl first.
4915 * configure.in: remove bison from noconfigdirs for Cygwin32 host
4919 * Makefile.in (local-distclean): Also remove mh-frag mt-frag.
4921 * configure.in (skipdirs): Add target-librx for Linux.
4922 (alpha-*-linux*): Use config/mh-elfalphapic and config/mt-elfalphapic.
4926 * Makefile.in (bootstrap): New target.
4930 * config.sub: Accept 'amigados' for backward compatability.
4934 * config.guess: Merge with FSF.
4938 * config.sub: Change 'amigados' to 'amigaos' to match current usage.
4942 * config.sub: Add "marketing-names" patch.
4946 * configure.in (*-*-rtems*): Do not build libgloss for rtems.
4950 * config.sub: Handle v850-elf.
4954 * .cvsignore (*-install): Remove.
4958 * ltconfig: Set CONFIG_SHELL in libtool.
4959 * ltmain.sh: Use CONFIG_SHELL instead of /bin/sh
4963 * configure.in (target_subdir): Set to libraries if enable_multilib.
4967 * config.guess: Update from gcc directory.
4971 * Makefile.in (all-sim): Depends on all-readline.
4975 * Makefile.in (BISON, YACC): Use $$s.
4976 (all-bison): Depend on all-texinfo.
4980 * Makefile.in (BISON): Add -L flag.
4985 * configure.in (noconfigdirs): Add support for v850e target.
4987 * config.sub (maybe_os): Add support for v850e target.
4991 * configure.in (noconfigdirs): Add support for v850ea target.
4993 * config.sub (maybe_os): Add support for v850ea target.
4997 * config.sub: Add mipstx39. Delete r3900.
5001 * Makefile.in (all-autoconf): Depends on all-texinfo.
5005 * config-ml.in ({powerpc,rs6000}*-*-*): Update to current AIX and
5010 * configure: Get CFLAGS and CXXFLAGS from Makefile, if possible.
5012 * configure: When handling a Canadian Cross, handle YACC as well as
5013 BISON. Just set BISON to bison. When setting YACC, prefer bison.
5014 * Makefile.in (all-bison): Depend upon all-texinfo.
5018 * Makefile.in (BISON): bison, not byacc or bison -y.
5019 (YACC): bison -y or byacc or yacc.
5020 (various): Add *-bison as appropriate.
5021 (taz): No need to mess with BISON anymore.
5025 * configure: If OSTYPE matches *win32*, try to find a good value for
5030 * Makefile.in (taz): Get the version number from AM_INIT_AUTOMAKE in
5031 configure.in if it is present.
5035 * Makefile.in (LD_FOR_TARGET): Change ld.new to ld-new.
5039 * config.sub: Recognize `arc' cpu.
5040 * configure.in: Likewise.
5041 * config-ml.in: Likewise.
5045 * Makefile.in ($(INSTALL_X11_MODULES)): Depend upon installdirs.
5049 * configure: Changed sed delimiter from ':' to '|' when
5050 attempting to substitute ${config_shell} for SHELL. On
5051 NT ${config_shell} may contain a ':' in it.
5055 * Makefile.in (EXTRA_GCC_FLAGS): Fix for non-bash shells.
5059 * Makefile.in (AS_FOR_TARGET): Change as.new to as-new.
5063 * Makefile.in (NM_FOR_TARGET): Change nm.new to nm-new.
5065 * ylwrap: If the program is a relative path, force it to be
5070 * configure (tooldir): Set BISON to `bison -y' and not just bison.
5074 * Makefile.in (CC_FOR_TARGET): When winsup/Makefile present,
5075 correctly specify the target build directory $(TARGET_SUBDIR)/winsup
5080 * Makefile.in (EXTRA_GCC_FLAGS): Fix handling of macros with values
5081 separated by spaces.
5086 * Makefile.in (DEVO_SUPPORT): Add ylwrap.
5088 * ltmain.sh: Handle /bin/sh at start of install program.
5090 * Makefile.in (DEVO_SUPPORT): Add ltconfig, ltmain.sh, and missing.
5092 * ltconfig, ltmain.sh: New files, from libtool 1.0.
5093 * missing: New file, from automake 1.2.
5097 * Makefile.in: Treat tix like tk, putting it in X11_MODULES. Add
5098 check-tk to CHECK_X11_MODULES.
5102 * config.sub: Merge with FSF.
5106 * config.guess: Merge with FSF.
5110 * configure: Treat msdosdjgpp like go32.
5111 * configure.in: Likewise. Don't remove gprof for go32.
5113 * configure: Change Makefile.tem2 to Makefile.tm2.
5117 * configure.in (noconfigdirs): For alpha-dec-osf*, don't ignore grep.
5121 * install-sh (chmodcmd): Set to null if the DST directory already
5122 exists. Same as Nov 11th change.
5126 * configure (GDB_TK): Needs itcl and tix.
5130 * config.guess: Update from FSF.
5134 * Makefile.in (GDB_TK): Depend on itcl and tix.
5138 * Makefile.in (INSTALL_PROGRAM_ARGS): New variable.
5139 (INSTALL_PROGRAM): Use $(INSTALL_PROGRAM_ARGS).
5140 (INSTALL_SCRIPT): New variable.
5141 (BASE_FLAGS_TO_PASS): Pass down INSTALL_SCRIPT.
5142 * configure.in: If host is *-*-cygwin32*, set INSTALL_PROGRAM_ARGS
5144 * install-sh: Add support for -x option.
5148 * configure.in, Makefile.in: Treat tix like itcl.
5152 * Makefile.in (WINDRES): New variable.
5153 (WINDRES_FOR_TARGET): New variable.
5154 (BASE_FLAGS_TO_PASS): Add WINDRES_FOR_TARGET.
5155 (EXTRA_HOST_FLAGS): Add WINDRES.
5156 (EXTRA_TARGET_FLAGS): Add WINDRES.
5157 (EXTRA_GCC_FLAGS): Add WINDRES.
5158 ($(DO_X)): Pass down WINDRES.
5159 ($(CONFIGURE_TARGET_MODULES)): Set WINDRES when configuring.
5160 * configure: Treat WINDRES like DLLTOOL, and WINDRES_FOR_TARGET like
5165 * configure.in: configure sim before gdb for win32-x-ppc
5169 Move gperf into the toplevel, from libg++.
5170 * configure.in (target_tools): Add target-gperf.
5171 (native_only): Add target-gperf.
5172 * Makefile.in (all-target-gperf): New target, depend on
5174 (configure-target-gperf): Empty rule.
5175 (ALL_TARGET_MODULES): Add all-target-gperf.
5176 (CONFIGURE_TARGET_MODULES): Add configure-target-gperf.
5177 (CHECK_TARGET_MODULES): Add check-target-gperf.
5178 (INSTALL_TARGET_MODULES): Add install-target-gperf.
5179 (CLEAN_TARGET_MODULES): Add clean-target-gperf.
5183 * config.sub (mn10200): Recognize new basic machine.
5187 * configure.in: Don't set ENABLE_MULTILIB, so we'll be passing
5188 --enable-multilib down to subdirs; setting TARGET_SUBDIR was enough.
5192 * configure.in: If we're building mips-sgi-irix6* native, turn on
5193 ENABLE_MULTILIB and set TARGET_SUBDIR.
5197 * Makefile.in (all-sn): Depend on all-grep.
5201 * configure.in: Use mh-ppcpic and mt-ppcpic for powerpc*-* targets.
5203 * configure: Set CFLAGS and CXXFLAGS, and substitute them into
5205 * Makefile.in: Add comment for CFLAGS and CXXFLAGS.
5207 * Makefile.in (DISTBISONFILES): Remove.
5208 (taz): Don't futz with DISTBISONFILES. Change BISON to use
5211 * configure.in: Build itl, db, sn, etc., when building for native
5214 * Makefile.in (LD): New variable.
5215 (EXTRA_HOST_FLAGS): Pass down LD.
5216 ($(DO_X)): Likewise.
5220 * Makefile.in (INSTALL): Use $(SHELL) when executing install-sh.
5224 * configure.in (targargs): Strip out any supplied --build argument
5225 before adding our own. Always add --build.
5229 * configure.in (targargs): Pass --build if we're doing
5234 * configure: Use '|' instead of ":" as the separator in
5235 sed. Otherwise sed chokes on NT path names with drive
5236 designators. Also look for "?:*" as the leading characters in an
5241 * config.sub: Support for r3900.
5245 * configure.in: Use install-sh, not install.sh.
5249 * Makefile.in (taz): Improve check for BISON so it doesn't try to
5254 * Makefile.in (INSTALL_MODULES): Put install-opcodes before
5259 * Makefile.in: Add automake targets.
5260 * configure.in (host_tools): Add automake.
5264 * configure: Default CXX to c++, not gcc.
5265 * Makefile.in (CXX): Set to c++, not gcc.
5266 (CXX_FOR_TARGET): When cross, transform c++, not gcc.
5270 * install-sh: try appending a .exe if source file doesn't
5275 * configure.in: Turn on multilib by default.
5276 (cross_only): Remove target-libiberty.
5278 * Makefile.in (all-gcc): Don't depend on libiberty.
5282 * config.guess: improve algorithm for recognizing Gnu Hurd x86.
5286 * Makefile.in (DEVO_SUPPORT): Add mpw-install.
5287 (DISTBISONFILES): Add ld/Makefile.in
5291 * configure.in: if target is cygwin32 but host isn't cygwin32,
5292 don't configure gdb tcl tk expect, not just gdb.
5296 * configure.in: Added gnuserv everywhere sn appears.
5298 * Makefile.in (ALL_MODULES): Added all-gnuserv.
5299 (CROSS_CHECK_MODULES): Added check-gnuserv.
5300 (INSTALL_MODULES): Added install-gnuserv.
5301 (CLEAN_MODULES): Added clean-gnuserv.
5302 (all-gnuserv): New target.
5306 * config.guess: Fixes for MIPS OpenBSD systems.
5310 * Makefile.in (INSTALL_XFORM): Remove.
5311 (BASE_FLAGS_TO_PASS): Remove INSTALL_XFORM.
5313 * mkinstalldirs: New file, copied from automake.
5314 * Makefile.in (installdirs): Rename from install-dirs. Use
5315 mkinstalldirs. Change all users.
5316 (DEVO_SUPPORT): Add mkinstalldirs.
5320 * install-sh: Rename from install.sh.
5321 * Makefile.in (INSTALL): Change install.sh to install-sh.
5322 (DEVO_SUPPORT): Likewise.
5324 * configure: Use ${config_shell} with ${moveifchange}. From Thomas
5329 * config.guess: Recognize OpenBSD systems correctly.
5333 * README, Makefile.in (ETC_SUPPORT): Remove references to
5334 cfg-paper*, configure.{texi,man,info*}._
5338 * Makefile.in (all.normal): Ensure that gcc is built after all
5339 the x11 - ie gdb - targets.
5343 * makefile.vms: Don't run conf-a-gas.
5347 * configure.in (hppa1.1-*-rtems*): New target, like hppa-*-*elf*.
5351 * configure.in: Remove noconfigdirs case since gdb also
5352 configures and builds for tic80-coff.
5356 * configure: Set cache_file to config.cache.
5357 * Makefile.in (local-distclean): Remove config.cache.
5361 * COPYING: Update FSF address.
5365 * configure.in (tic80-*-*): Remove G++ libraries and libgloss from
5370 * Makefile.in (install-dirs): Don't crash if prefix, and hence
5375 * config.sub: Tweak mn10300 entry.
5379 * configure.in (host_tools): Put sim before gdb, so gdb's
5380 configure.tgt can determine if the simulator was configured.
5384 * config.sub: Move BeOS $os case to be with other Cygnus
5389 * config.sub: Remove misplaced comment that broke Linux.
5393 * config.sub: Add BeOS support.
5397 * Makefile.in (CHECK_X11_MODULES): Don't run check-tk.
5401 * configure.in (noconfigdirs): Remove tcl and tk from
5402 noconfigdirs for cygwin32 builds.
5406 * configure.in (tic80-*-*): Remove ld from noconfigdirs.
5410 * Makefile.in (GAS_SUPPORT_DIRS, BINUTILS_SUPPORT_DIRS): Remove
5411 make-all.com, use makefile.vms instead.
5415 * config.sub: Accept -lnews*.
5419 * configure.in (noconfigdirs): Disable target-newlib,
5420 target-examples and target-libiberty for d30v.
5424 * configure.in (noconfigdirs): Enable ld for d30v.
5428 * configure.in (tic80-*-*): Build compiler.
5432 * configure.in (d30v-*): Remove sim directory from list of
5433 unsupported d30v directories
5437 * config.sub, configure.in: Add d30v target cpu.
5441 * makefile.vms: New file.
5442 * make-all.com: Remove.
5446 * Makefile.in (EXTRA_GCC_FLAGS): Add LIBGCC2_DEBUG_CFLAGS.
5450 * Makefile.in (all-itcl): The rule is all-itcl, not all-tcl.
5454 * Makefile.in (ALL_MODULES): Added all-db.
5455 (CROSS_CHECK_MODULES): Addec check-db.
5456 (INSTALL_MODULES): Added install-db.
5457 (CLEAN_MODULES): Added clean-db.
5461 * config.guess: Merge with latest FSF sources.
5465 * Makefile.in (ALL_MODULES): Added all-itcl.
5466 (CROSS_CHECK_MODULES): Added check-itcl.
5467 (INSTALL_MODULES): Added install-itcl.
5468 (CLEAN_MODULES): Added clean-itcl.
5472 * configure.in: build gdb for mn10200
5476 * Makefile.in (all-target-winsup): Depend on all-target-libio.
5480 * configure.in (tic80-*-*): Turn off most targets right now.
5484 * Makefile.in (MAKEINFO): Check for the existence of the Makefile,
5485 rather than the makeinfo program.
5486 (do-info): Depend upon all-texinfo.
5490 * configure.in: Remove uses of config/mh-linux.
5492 * config.sub, config.guess: Merge with latest FSF sources.
5496 * config.sub (case $basic_machine): Add tic80 entries.
5500 * config.sub, config.guess: Merge with latest FSF sources.
5504 * mpw-build.in: Build ld before gcc, use NewFolderRecursive.
5505 * mpw-config.in: Test for NewFolderRecursive.
5506 * mpw-install: Use symbolic name for startup filename.
5507 * mpw-README: Add various additional details.
5511 * configure.in (mips*-sgi-irix6*): Remove binutils from noconfigdirs.
5515 * configure.in: Do build gcc and the target libraries for
5520 * configure.in: don't avoid building gdb for mn10300 any more
5521 * Makefile.in: double-quote GCC_FOR_TARGET line in EXTRA_GCC_FLAGS
5522 instead of single-quoting it.
5526 * configure.in: Don't use --with-stabs on IRIX 6.
5530 * configure.in (m32r): Build gdb, libg++ now.
5534 * configure.in (mips*-sgi-irix6*): Remove gdb and related
5535 directories from noconfigdirs.
5539 * config.sub (basic_machine): added mips16 configuration
5543 * config.sub: Handle d10v-unknown.
5547 * config.sub: Handle v850-unknown.
5551 * Makefile.in: add findutils
5552 * configure.in: add findutils to list of host_tools
5556 * config.sub: Handle mn10200 and mn10300.
5560 * configure.in (d10v-*): Do not build librx.
5564 * configure.in (mn10300): Build everything except gdb & libgloss.
5568 * config.guess: Patch for Dansk Data Elektronik servers,
5571 For ncr, use /bin/uname rather than uname, since GNU uname does not
5574 Patch for MIPS R4000 running System V,
5577 Fix thinko for nextstep.
5582 * config.guess: Guess mips-dec-mach_bsd4.3.
5585 * config.guess (i?86-ncr-sysv*): Emit just enough of the minor
5587 * config.guess (mips-mips-riscos*): Emit just enough of the
5591 * config.guess (sparc-auspex-sunos*): Added.
5592 (f300-fujitsu-*): Added.
5595 * config.guess: Recognize a Tadpole as a sparc.
5599 * config.guess: Don't assume that NextStep version is either 2 or
5600 3. NextStep 4 (aka OpenStep 4) has come out now.
5604 * config.guess: Support Cray T90 that reports itself as "CRAY TS".
5609 * config.sub: Contributions from bug-gnu-utils to:
5610 Support plain "hppa" (no version given) architecture, reported by
5612 OpenBSD like NetBSD.
5613 LynxOs is not a hardware supplier.
5615 * config.guess: Contributions from bug-gnu-utils to add support for:
5616 OpenBSD like NetBSD.
5618 More Pyramid systems.
5619 i[n>4]86 Intel chips.
5620 M680[n>4]0 Motorola chips.
5621 Use unknown instead of lynx for hardware manufacturer.
5625 * install.sh (chmodcmd): Set to null if the DST directory already
5630 * configure.in (powerpc*-{eabi,elf,linux,rtem,sysv,solaris}*): Do
5631 not use mt-ppc target Makefile fragment any more.
5635 * configure.in (*-*-windows): Exclude everything but those dirs
5636 needed to build windows.
5640 * Makefile.in (all-target-winsup): Depend on all-target-librx.
5644 * configure.in: Exclude mmalloc from i386-windows.
5648 * Undo my previous change.
5652 * Makefile.in (EXTRA_GCC_FLAGS): Pass down GCC_FOR_TARGET
5654 (MAKEOVERRIDES): Define (revert this part of October 18 change).
5658 * Makefile.in (FLAGS_TO_PASS): Add $(HOST_FLAGS) to allow the
5659 host to add it's own flags.
5663 * configure: Handle GCC_FOR_TARGET like CC_FOR_TARGET.
5667 * Makefile.in (CC_FOR_TARGET): Check for xgcc, not Makefile.
5668 (CXX_FOR_TARGET): Likewise.
5669 (GCC_FOR_TARGET): Define.
5670 (BASE_FLAGS_TO_PASS): Remove GCC_FOR_TARGET.
5671 (EXTRA_GCC_FLAGS): Define GCC_FOR_TARGET based on whether
5672 CC_FOR_TARGET was specified on the command line.
5673 (MAKEOVERRIDES): Don't define.
5677 * configure.in (m32r): Fix spelling of libg++ libs.
5681 * config.sub (-apple*): Remove, now redundant.
5685 * configure: Don't get confused by CPU-VENDOR-linux-gnu.
5687 * configure: Rework yesterday's sed script patch.
5689 * config.sub: Merge with FSF.
5693 * config.guess: Merge from FSF.
5696 * config.guess: Use pc instead of unknown, for pc clone systems.
5697 Change linux to linux-gnu.
5700 * config.guess: Avoid non-portable tr syntax.
5704 * test-build.mk (HOLES): Add "xargs" for gdb.
5706 * configure: Avoid hpux10.20 sed bug.
5710 * configure.in: Add support for windows host
5711 (that is a build done under the Microsoft build environment).
5715 * Makefile.in: Replace all uses of srcroot with s, to shrink
5716 command line lengths.
5719 * configure.in: If configuring for newlib, pass --with-newlib to
5721 * Makefile.in (CC_FOR_TARGET): If winsup/Makefile exists, pass a
5722 -Bnewlib/ and -Lwinsup to gcc.
5723 (CXX_FOR_TARGET): Likewise.
5727 * Makefile.in (ETC_SUPPORT): Add configure.
5731 * configure.in: Use config/mh-dgux386 for i[345]86-dg-dgux
5732 host configuration file.
5736 * configure.in: Break mn10x00 support into separate
5737 mn10200 and mn10300 configurations.
5738 * config.sub: Likewise.
5742 * configure.in: Add lots of stuff to noconfigdirs for
5743 the mn10x00 targets.
5745 * config.sub, configure.in: Add mn10x00 support.
5749 * make-all.com: Call conf-a-gas, not config-a-gas.
5753 * configure.in (noconfigdirs): Don't build libgloss for arm-coff
5758 * mpw-README: Add much more detail for native PowerMac.
5759 * mpw-install: New file.
5760 * mpw-configure: Add --norecursion and --help options.
5761 * mpw-config.in: Translate readme and install files when
5763 * mpw-build.in: Don't always depend on byacc and flex.
5764 (install-only-top): New action.
5768 * configure.in: You can now configure GDB for the v850.
5772 * configure.in (noconfigdirs): Don't configure any C++ dirs
5777 * config.sub: Recognize mips64vr5000.
5781 * configure.in: Use a single line for host_tools and native_only.
5785 * config.sub, configure.in: Add entries for m32r.
5789 * Makefile.in (inet-install): Don't run install-gzip.
5793 * configure.in: Don't config lots of things for *-*-windows*.
5797 * mpw-config.in: Test for mpw-true, true, and null-command scripts.
5798 (host_libs, host_tools): Copy from configure.in.
5799 * mpw-configure: Don't complain about directories not found.
5803 * configure.in (i[345]86): Recognize i686 for pentium pro.
5804 (i[3456]86-*-dgux*): Use config/mh-sysv for the host configuration
5807 * config.guess (i[345]86): Ditto.
5811 * configure.in (noconfigdirs): Removed gdb for D10V.
5815 * configure.in: Remove ld, target-libio, target-libg++, and
5816 target-libstdc++ from noconfigdirs.
5820 * configure: Fix three locations where shell scripts were
5821 being run directly rather than with config_shell.
5825 * configure.in (v850-*-*): Set up initial $noconfigdirs.
5826 * config.sub (basic_machine): Recognize v850.
5830 * mpw-configure: Handle multiple enable/disable options and
5831 pass them down recursively, handle -c and -s flags appropriately
5832 depending on choice of compiler, add escape mechanism for
5833 quoted arguments to gC.
5837 * configure.in (powerpc*-*-*): For eabi, system V.4, Linux, and
5838 solaris targets, use config/mt-ppc to set C{,XX}FLAGS_FOR_TARGETS
5839 so that -mrelocatable-lib and -mno-eabi are used.
5841 * Makefile.in (CONFIGURE_TARGET_MODULES): If target compiler does
5842 not support --print-multi-lib, don't abort.
5846 * make-all.com: Run config-a-gas.
5847 * setup.com: Don't copy subdirectory files around.
5851 * configure.in (*-*-ose): Remove exclusion of libgloss for this
5852 target, it now compiles correctly.
5856 * mpw-config.in: Generate Mac include for elf/dwarf2.h.
5860 * configure.in (d10v-*-*): Remove ld from $noconfigdirs.
5864 * configure.in (native_only): Add prms.
5868 * Makefile.in (GAS_SUPPORT_DIRS): Add make-all.com and setup.com.
5869 (BINUTILS_SUPPORT_DIRS): Likewise.
5873 * configure.in (d10v-*-*): Don't configure ld or gdb until the
5874 d10v support is added.
5878 * configure.in (d10v-*-*): New target.
5882 * config.guess (HP 9000/811): Recognize this as a PA1.1
5887 * Makefile.in (do-tar-gz): New target, split out from tail end of
5888 taz target. Run each command separately, don't use pipes.
5893 * mpw-configure: Look for g-mpw-make.sed in config/mpw.
5894 * mpw-build.in: No builds should depend on building byacc or flex,
5895 they are assumed to be installed already.
5899 * Makefile.in (CONFIGURE_TARGET_MODULES): Set r environment
5900 variable that CC_FOR_TARGET needs.
5904 * Makefile.in (CONFIGURE_TARGET_MODULES): Determine if the multlib
5905 options have changed since the last time the subdirectory was
5906 configured, and if it has, reconfigure.
5907 (CLEAN_TARGET_MODULES): Delete multilib.out and tmpmulti.out, which
5908 CONFIGURE_TARGET_MODULES uses to remember the old multilib options.
5912 * Makefile.in (ALL_MODULES,CROSS_CHECK_MODULES,INSTALL_MODULES,
5913 CLEAN_MODULES): Add bash.
5914 (all-bash): New target.
5918 * configure.in (mips-sgi-irix6*): Use mh-irix6 instead of mh-irix5.
5922 * config.sub (basic_machine): Recognize d10v as a valid processor.
5926 * mpw-configure: Add support for --bindir.
5927 * mpw-build.in: Use a GCC-specific build script for GCC actions.
5931 * configure.in: add bash, time, gawk to list of hosttools and things
5932 to only build for native toolchains
5936 * Makefile.in (docdir): Remove.
5940 * Makefile.in (datadir): Set to $(prefix)/share.
5944 * configure.in: build diff and patch for cygwin32-hosted
5949 * config.sub: Accept -rtems*.
5953 * configure.in: enable dosrel for cygwin32-hosted builds,
5954 remove diff from the list of things not buildable
5959 * Makefile.in (TARGET_SUBDIR): Move comment to previous line so we
5964 * configure.in (mips*-sgi-irix6*): Set noconfigdirs appropriately.
5968 * Makefile.in (taz): Handle case where tex3patch didn't even get
5969 checked out. Also, if it was found, put the symlink in a new util
5974 * config.guess (*:Linux:*:*): Add support for PowerPC Linux.
5978 * config.sub: Recognize -openvms.
5979 * configure.in (alpha*-*-*vms*): Set noconfigdirs.
5980 * make-all.com, setup.com: New files.
5984 * Makefile.in (taz): tex3patch moved to texinfo/util.
5988 * configure: enable_gdbtk=no for cygwin32-hosted toolchains
5989 * configure.in: remove make from disable-if-Can-Cross list
5990 enable gdb if ${host} and ${target} are cygwin32
5994 * config.guess (i?86-ncr-sysv*): Emit minor release numbers.
5995 Recognize the NCR 4850 machine and NCR Pentium-based platforms.
5999 * config.guess: Combine mips-mips-riscos cases, and use cpp to
6000 distinguish sysv/svr4/bsd variants.
6005 * configure.in: Added copyright notice.
6006 * move-if-change: Added copyright notice.
6010 * configure.in (powerpcle-*-solaris*): Until we get shared
6011 libraries working, don't build gdb, sim, make, tcl, tk, or
6016 * config.guess: Merge with FSF:
6019 * config.guess (*:Linux:*:*): Add guess for sparc-unknown-linux.
6022 * config.guess (AViiON:dgux:*:*): Fix typo in recognizing mc88110.
6025 * config.guess: Combine two OSF1 rules.
6027 * config.guess (dgux): Use /usr/bin/uname rather than uname,
6032 * Makefile.in (MAKEDIRS): Removed $(tooldir).
6036 * mpw-README: Document GCCIncludes.
6040 * configure.in (alpha-*-linux*): Set enable_shared to yes.
6044 * mpw-configure: Handle --enable-FOO and --disable-FOO.
6048 * configure.in (*-*-cygwin32): Configure make.
6052 * Makefile.in (inet-install): Quote value of INSTALL_MODULES.
6056 * Makefile.in (all-inet): Depend on all-perl.
6058 * Makefile.in (inet-install): New target.
6060 * Makefile.in (all-inet): Depend on all-tcl.
6061 (all-inet): Depend on all-send-pr.
6065 * configure.in (powerpcle-*-solaris*): Turn off tk and tcl
6070 * configure.in: Don't configure --with-gnu-ld on AIX.
6074 * configure.in (powerpcle-*-solaris*): Turn off gdb temporarily.
6078 * Makefile.in (ALL_MODULES): Added all-inet.
6079 (CROSS_CHECK_MODULES): Added check-inet.
6080 (INSTALL_MODULES): Added install-inet.
6081 (CLEAN_MODULES): Added clean-inet.
6082 (all-indent): New target.
6084 * configure.in (host_tools): Added inet.
6085 (native_only): Added inet.
6086 (noconfigdirs): Added inet.
6090 * configure.in: Don't configure libgloss if we are not configuring
6095 * configure.in: Don't configure libgloss for unsupported
6100 * Makefile.in (CLEAN_MODULES): Add clean-apache.
6104 * Makefile.in (ALL_MODULES): Include all-apache.
6105 (CROSS_CHECK_MODULES): Include check-apache.
6106 (INSTALL_MODULES): Include install-apache.
6107 (all-apache): New target.
6109 * configure.in: Added apache everywhere perl is seen.
6113 * Makefile.in: Add support for clean-{module} and
6114 clean-target-{module} rules.
6118 * configure.in (*-*-ose) do not build libgloss.
6122 * config.guess (prep*:SunOS:5.*:*): Turn into
6123 powerpele-unknown-solaris2.
6127 * configure.in: Permit --enable-shared to specify a list of
6132 * configure.in (host==solaris): Pass only the first word of $CC
6133 to /usr/bin/which when checking if we're using /usr/ccs/bin/cc.
6137 * Makefile.in (BASE_FLAGS_TO_PASS): pass down $(MAKE).
6141 * Makefile.in (ALL_MODULES): Include all-perl.
6142 (CROSS_CHECK_MODULES): Include check-perl.
6143 (INSTALL_MODULES): Include install-perl.
6144 (ALL_X11_MODULES): Include all-guile.
6145 (CHECK_X11_MODULES): Include check-guile.
6146 (INSTALL_X11_MODULES): Include install-guile.
6147 (all-perl): New target.
6148 (all-guile): New target.
6150 * configure.in (host_tools): Include perl and guile.
6151 (native_only): Include perl and guile.
6152 (noconfigdirs): Don't build guile and perl; no ports have been
6157 * configure (--enable-*): Handle quoted option lists such as
6158 --enable-sim-cflags='-g0 -O' better.
6162 * Makefile.in ({,inst}all-target): New rule so we can make and
6163 install all of the target directories easily.
6167 * configure.in: Add missing global flag in sed substitution when
6168 deleting `target-' from ${configdirs}.
6172 * Makefile.in (DO_X): Don't get confused if CC contains `=' in an
6175 * configure.in (mips*-nec-sysvr4*): Use a host_makefile_frag of
6178 * install.sh: Correct misspelling of transformbasename.
6180 * config.guess: Recognize mips-*-sysv*.
6184 * config.sub: Recognize mon960.
6188 * configure: Restore Canadian Cross handling of BISON and LEX,
6189 removed in Feb 20 change.
6194 Mention make install. Remove the old copyright date as well the
6195 clumsy and rather pointless copyright on the README file.
6199 * Makefile.in ($(CONFIGURE_TARGET_MODULES)): If there is a
6200 Makefile after running symlink-tree, then run `make distclean' to
6201 avoid clobbering any generated files in srcdir.
6205 * configure.in (m68k-*-netbsd*): Build everything now.
6209 * Makefile.in (taz): Fix quoting.
6213 * configure.in (sparclet-*-*): Build everything now.
6217 * configure.in (m68k-*-linux*): New host.
6221 * configure: Check for bison before byacc.
6225 * Makefile.in configure: Change the way LEX and BISON/YACC are
6226 set. configure now defines DEFAULT_LEX and DEFAULT_YACC by
6227 searching PATH. These are used as fallbacks by Makefile.in if
6228 flex/bison/byacc aren't in objdir.
6232 * Makefile.in: Make everything which depends upon all-bfd also
6233 depend upon all-opcodes, in case --with-commonbfdlib is used.
6237 * configure.in (host *-*-cygwin32): Don't build gdb if we are
6238 building NT native compilers on Unix.
6242 * configure.in: Don't get CC from the host Makefile fragment if we
6243 can find gcc in PATH, or if this is a Canadian Cross. Move the
6244 Solaris test for /usr/ucb/cc to the post target script, just after
6245 the compiler sanity test.
6249 * config.sub: Merge with FSF.
6253 * Makefile.in (RPATH_ENVVAR): New variable.
6254 (REALLY_SET_LIB_PATH): Use it.
6255 * configure.in: On HP/UX, set RPATH_ENVVAR to SHLIB_PATH.
6259 * config.sub, configure.in: Recognize sparclet cpu.
6263 * config.guess: Support m68k-cbm-sysv4.
6267 * config.guess (*:Linux:*:*): Guess m68k-unknown-linux and
6268 m68k-unknown-linuxaout from linker help string. Put quotes around
6273 * config.guess (powerpc-harris-powerunix): Add guess for port
6278 * config.guess (UNAME_VERSION): Recognize X4.x as an OSF version.
6282 * configure.in: If --enable-shared was used, set SET_LIB_PATH to
6283 $(REALLY_SET_LIB_PATH) in Makefile.
6284 * Makefile.in (SET_LIB_PATH): New variable.
6285 (REALLY_SET_LIB_PATH): New variable.
6286 ($(DO_X)): Use $(SET_LIB_PATH).
6287 (install.all, gcc-no-fixedincludes, $(ALL_MODULES)): Likewise.
6288 ($(NATIVE_CHECK_MODULES), $(CROSS_CHECK_MODULES)): Likewise.
6289 ($(INSTALL_MODULES), $(CONFIGURE_TARGET_MODULES)): Likewise.
6290 ($(ALL_TARGET_MODULES), $(CHECK_TARGET_MODULES)): Likewise.
6291 ($(INSTALL_TARGET_MODULES), $(ALL_X11_MODULES)): Likewise.
6292 ($(CHECK_X11_MODULES), $(INSTALL_X11_MODULES)): Likewise.
6293 (all-gcc, all-bootstrap, check-gcc, install-gcc): Likewise.
6294 (install-dosrel): Likewise.
6295 (all-opcodes): Depend upon all-libiberty.
6299 * config.guess (*:CYGWIN*): New
6303 * Makefile.in (all-target-winsup): All all-target-libiberty.
6307 * configure.in (noconfigdirs): Add missing # in front of comment.
6311 * configure.in: add second pass to things added to noconfigdirs
6312 so *-gm-magic can exclude libgloss properly.
6316 * mpw-configure (extralibs_name, rez_name): Set correctly
6317 for MWC68K compiler.
6319 * mpw-README: Add more info on the necessary build tools.
6323 * configure.in, config.sub: Recognize cygwin32.
6327 * config.guess, config.sub: Recognize A/UX.
6331 * config.sub: Merge with gcc/config.sub.
6335 * mpw-build.in (do-binutils): Add build of stamps.
6339 * config.sub: Add recognition for mips64vr4100*-* targets.
6343 * test-build.mk: Add checking of `hpux9' rather than just `hpux'.
6344 Add creation of gconfigargs with `--enable-shared' turned on.
6345 ($(host)-stamp-stage2-configured): Pass $(gconfigargs).
6346 ($(host)-stamp-stage3-configured): Likewise.
6347 (HOLES): Add chatr and ldd.
6348 (i386-ncr-sysv4.3*): Add use of /usr/ccs/bin in the PATH and HOLE_DIRS.
6352 * configure: Pass --nfp to recursive configures.
6356 * Makefile.in (DLLTOOL): New.
6357 (DLLTOOL_FOR_TARGET): New.
6358 (EXTRA_HOST_FLAGS): Pass down DLLTOOL.
6359 (EXTRA_TARGET_FLAGS): Ditto.
6360 (EXTRA_GCC_FLAGS): Ditto.
6361 (CONFIGURE_TARGET_MODULES): Ditto.
6363 * configure: Add DLLTOOL.
6368 * configure.in (i[345]86-*-sco3.2v5*): Use mh-sysv instead of
6369 mh-sco, since old workarounds no longer needed, and don't
6370 build ld, since libraries have weak symbols in COFF.
6374 * Makefile.in (CONFIGURE_TARGET_MODULES): Add missing ';'.
6378 * configure.in: Make sure that ${CC} can be used to compile an
6383 * Makefile.in (all-gdb): Depend on $(GDB_TK).
6384 * configure (GDB_TK): Set GDB_TK to either "all-tcl all-tk" or
6385 nothing depending on whether gdbtk is being built.
6389 * Makefile.in (newlib.tar.gz): Delete building of newlib's info files.
6393 * configure.in (noconfigdirs): Put ld or gas in this early, if the
6394 user specifically used --with-gnu-ld=no or --with-gnu-as=no.
6398 * config-ml.in: Add support for
6399 --disable-{softfloat,m68881,m68000,m68020} on m68*-*-*.
6400 Simplify setting of multidirs from --disable-foo.
6404 * Makefile.in (EXTRA_GCC_FLAGS): If any of the make variables
6405 LANGUAGES, BOOT_CFLAGS, STMP_FIXPROTO, LIMITS_H_TEST,
6406 LIBGCC1_TEST, LIBGCC2_CFLAGS, LIBGCC2_INCLUDES, and ENQUIRE are
6407 non-empty, pass them on to the GCC make.
6408 (all-bootstrap): New rule that is like all-gcc, except it executes
6409 the GCC bootstrap rule instead of the GCC all rule.
6413 * config-ml.in (ml_realsrcdir): New, to account for ${subdir}.
6417 * config.guess (AViiON:dgux:*:*): Update from FSF to add pentium
6422 * config.sub (i*86*) Change [345] to [3456]
6426 * configure.in (noconfigdirs): Add gas or ld if --with-gnu-as=no or
6431 * config-ml.in (rs6000*, powerpc*): Add switches to control which
6432 AIX multilibs get built.
6436 * configure.in (i386-win32): Don't build expect if we're not
6437 building the tcl subdir.
6441 * Makefile.in: (configure-target-examples, all-target-examples):
6442 New targets, configure and build example programs.
6446 * mpw-configure: If an mpw-config.in generated a file mk.sed,
6447 use it as input to sedit the generated MPW makefile.
6448 * mpw-README: Add a suggestion about Gestalt.h.
6452 * config.sub: Accept *-*-ieee*.
6456 * Makefile.in (local-distclean): Remove $(TARGET_SUBDIR). From
6461 * configure.in (host==powerpc-pe): Add many directories to noconfigdirs
6462 for powerpc-pe native.
6463 (target==i386-win32): add tcl, make to noconfigdirs if canadian cross.
6464 (target==powerpc-pe): duplicate i386-win32 entry.
6468 * configure.in (noconfigdirs): Exclude target-newlib for all versions
6469 of vxworks, not just vxworks5.1.
6473 * mpw-configure: Add support for exec-prefix.
6477 * config.guess: Recognize HP model 816 machines as having
6482 * configure: Ignore new autoconf configure options.
6486 * config.guess: Recognize Pentium under SCO.
6491 * configure.in (noconfigdirs): Disable target-libio on v810-*-*.
6495 * configure.in: Don't configure gas for alpha-dec-osf*.
6499 * configure.in: Default to --with-stabs for some targets for which
6500 it makes sense: mips*-*-*, alpha*-*-osf*, i[345]86*-*-sysv4* and
6501 i[345]86*-*-unixware*.
6505 * config-ml.in: Get list of multidirs using gcc --print-multi-lib
6506 rather than basing it on the target. Simplify handling of options
6507 controlling which directories to configure. Remove extraneous
6508 slash in multi-clean target.
6512 * config-ml.in: Prefix more variables with ml_ so they don't collide
6517 * configure: Don't turn -v into --v.
6521 * configure.in (targargs): Fix typo.
6523 * Makefile.in (DEVO_SUPPORT): Add symlink-tree.
6527 * configure.in: Strip --host and --target options from
6528 CONFIG_ARGUMENTS, and always configure for --host only. Add
6529 --with-cross-host option when building with a cross-compiler.
6530 * configure: Canonicalize the arguments put into config.status by
6531 always using `=' for an option with an argument. Pass a presumed
6532 --host or --target explicitly.
6536 * config.sub: Merge -macos*, -magic*, -pe*, and -win32 cases
6537 into general OS recognition case.
6541 * configure.in (target_configdirs): add target-winsup only
6542 for win32 target systems.
6546 * Makefile.in (all-target-libgloss): Depend upon
6547 configure-target-newlib, since when libgloss is built it looks to
6548 see if the newlib directory exists.
6552 * Makefile.in (DEVO_SUPPORT): Use config-ml.in instead of
6557 * configure: Handle LD and LD_FOR_TARGET when configuring a
6562 * configure.in (target_libs): add target-winsup.
6563 (target==i386-win32): add patch diff flex make to $noconfigdirs.
6564 (target==ppcle-pe): remove ld from $noconfigdirs.
6568 * Makefile.in (CONFIGURE_TARGET_MODULES): Pass --with-target-subdir.
6569 Preserve relative path names in $srcdir. Build symlink tree if
6570 configuring cross target dir and srcdir=. (= no VPATH support).
6571 (configure-target-libg++): Depend on configure-target-librx.
6572 * cfg-ml-com.in, cfg-ml-pos.in: Deleted.
6573 * config-ml.in: New file.
6574 * symlink-tree: New file.
6575 * configure: Ensure srcdir="." if that's what it is.
6579 * mpw-README: Clarify some phrasing, add notes about CodeWarrior
6580 includes and FLEX_SKELETON setting.
6581 * mpw-configure (--with-gnu-ld): New option, controls whether
6582 to use PPCLink or ld with PowerMac GCC.
6583 * mpw-build.in (all-grez, do-grez, install-grez): New targets.
6584 * mpw-config.in: Configure grez if targeting Mac.
6586 * config.sub: Accept pmac and pmac-mpw as names for PowerMacs,
6587 accept mpw and mac-mpw as names for m68k Macs, change macos7 to
6589 * configure.in: Configure grez resource compiler if targeting Mac.
6590 * Makefile.in (all-grez, install-grez): New targets.
6594 * configure: CXX defaults to gcc, not g++. If we find
6595 gcc in the path, set CC to gcc -O2.
6599 * configure: Default ${build} correctly. Avoid picking up extra
6600 spaces when reading CC and CXX from Makefile. When doing a
6601 Canadian Cross, use plausible default values for numerous
6603 * configure.in: When doing a Canadian Cross, don't try to
6604 configure tools whose configure script can't handle it.
6608 * cfg-ml-com.in (sh-*-*): Add m2 and ml/m2 to multidirs.
6612 * configure: Remove dubious bug reporting address.
6616 * Makefile.in ($(CONFIGURE_TARGET_MODULES)): If subdir has
6617 configure script, run that instead of this directory's configure.
6618 In either case, print a message that we're configuring the sub-dir.
6622 * configure.in: Before checking for the existence of various files,
6623 use sed to filter out "target-".
6627 * Makefile.in (DO_X): Split rule to decrease command line length
6629 (Philippe De Muyter).
6633 * Makefile.in (all-patch): depend on all-libiberty.
6637 * configure.in: If the only directory in target_configdirs which
6638 actually exists is libiberty, then set target_configdirs to empty,
6639 to avoid trying to build a target libiberty in a gas or gdb
6644 * configure.in (host_makefile_frag): Use m68k-sun-sunos* instead
6645 of m68k-sun-* when selecting mh-sun3 to avoid matching NetBSD/sun3
6650 * configure.in (copy_dirs): Use sys-include instead of include
6651 for --with-headers option.
6655 * Makefile.in, configure.in: Make winsup builds work with
6660 * configure.in: Build the linker on AIX.
6664 * Makefile.in (CC_FOR_TARGET, CXX_FOR_TARGET): Add $(TARGET_SUBDIR)
6669 * Makefile.in (all-gcc): Fix typo.
6673 * Makefile.in ($(CHECK_TARGET_MODULES)): Fix typo.
6677 * configure.in: Rename libFOO to target-libFOO, and xiberty
6678 to target-xiberty, to provide more flexibility.
6679 (target_subdir): Define. Create if cross.
6680 Set TARGET_SUBDIR in Makefile to ${target_subdir}.
6681 * Makefile.in: Rename all-libFOO -> all-target-libFOO, all-xiberty
6682 -> all-target-libiberty, configure-libFOO -> configure-target-libFOO,
6683 check-libFOO -> check-target-libFOO, etc.
6684 ($(DO_X)): Iterate over TARGET_CONFIGDIRS after SUBDIRS.
6685 ($(CONFIGURE_TARGET_MODULES), $(CHECK_TARGET_MODULES),
6686 $(ALL_TARGET_MODULES), $(INSTALL_TARGET_MODULES)): Update accordingly.
6687 (configure-target-XXX): Depend on $(ALL_GCC), not all-gcc, to
6688 allow ALL_GCC="" to only configure.
6689 (DEVO_SUPPORT): Add cfg-ml-com.in and cfg-ml-pos.in.
6690 (ETC_SUPPORT, ETC_SUPPORT_PFX): Merge; update 'taz' accordingly.
6691 (LIBGXX_SUPPORT_DIRS): Remove xiberty.
6695 * Makefile.in (taz): Build "info" in etc explicitly.
6699 * configure.in: Make sure that CC is undefined (as opposed to
6700 null) if toplevel/config/mh-{host} doesn't define it. Fixes a
6701 problem with autoconf trying to configure on a host without GCC.
6705 * mpw-configure: Set host alias from choice of host compiler,
6706 only use generic MPW Makefile sed if present, edit a file
6707 named "hacked_Makefile.in" instead of "Makefile.in" if present.
6708 * mpw-README: Add problem notes about CW6 and CW7.
6712 * Makefile.in (taz): Use ";" instead of ";;".
6716 * Makefile.in (taz): Grep for '^diststuff:' or '^info:' in
6717 sub-directory Makefiles, instead of using DISTSTUFFDIRS and
6719 (DISTSTUFFDIRS, DISTDOCDIRS): Removed - no longer used.
6720 (newlib.tar.gz): Don't pass DISTDOCDIRS to recursive make.
6724 * Makefile.in (DISTDOCDIRS): Remove ld gprof bnutils gas libg++ gdb
6725 and gnats, because they are now subsumed by DISTSTUFFDIRS.
6726 Move bfd to DISTSTUFFDIRS.
6730 * Makefile.in (X11_LIB): Removed.
6731 (X11_FLAGS_TO_PASS): pass only X11_EXTRA_CFLAGS and X11_EXTRA_LIBS.
6733 * configure.in (host_makefile_frag): mh-aix & mh-sun removed.
6737 * cfg-ml-com.in (powerpc*): Shorten some of the multilib directory
6742 * cfg-ml-com.in (powerpc*-eabi*): Add mcall-aixdesc varients.
6746 * configure.in (i[345]86-*-win32): Always build newlib.
6747 Don't configure cvs, autoconf or texinfo.
6748 * Makefile.in (LD_FOR_TARGET): New.
6749 (BASE_FLAGS_TO_PASS, EXTRA_TARGET_FLAGS, CONFIGURE_TARGET_MODULES):
6750 Pass down LD_FOR_TARGET.
6754 * winsup: New directory.
6755 * Makefile.in: Build winsup.
6756 * configure.in: Winsup is configured when target is win32.
6757 Can only build win32 target GDB when native.
6761 * config.guess: Recognize HP model 819 machines as having
6766 * configure: Fix sed loop which substitutes for CC and CXX to
6767 avoid bug found in various sed implementations.
6771 * cfg-ml-com.in (powerpc-*-eabisim): Delete separate rule for
6772 simulator. Use standard powerpc-*-eabi*.
6776 * configure.in: Stop putting gas and binutils in noconfigdirs for
6777 powerpc-*-aix* and rs6000-*-*.
6781 * cfg-ml-com.in (powerpc*-*-eabisim*): Add support for building
6782 -mcall-aixdesc libraries.
6788 * config.sub (arm | armel | armeb): Fix shell syntax.
6792 * cfg-ml-com.in ({powerpc,rs6000}-ibm-aix*): Add multilibs for
6793 -msoft-float and -mcpu=common support.
6794 (powerpc*-*-eabisim*): Add support for building -mcall-aix
6799 * configure.in: Allow configuration and build of emacs19 for the alpha.
6803 * configure.in (CC): Get ^CC, not just any old CC, from
6804 ${host_makefile_frag}.
6808 * configure.in (CC): Try to get CC from
6809 ${srcdir}/${host_makefile_frag}, not ${host_makefile_frag}.
6813 * Makefile.in (TARGET_CONFIGDIRS): configure targetdirs
6814 only if it exists in $(srcdir).
6818 * configure: If CC and CXX are not set in the environment, set
6819 them, based on either an existing Makefile or on searching for gcc
6820 in PATH. Substitute for CC and CXX in Makefile.
6821 * configure.in: Remove libm from target_libs. Separate
6822 target_configdirs from configdirs. If CC is not set in
6823 environment, try to get it from a host Makefile fragment. Rewrite
6824 changes of configdirs to use skipdirs instead. A few minor
6825 tweaks. Take directories out of target_configdirs as they are
6826 taken out of configdirs. Remove existing Makefile files from
6827 subdirectories. Substitute for TARGET_CONFIGDIRS and
6828 CONFIG_ARGUMENTS in Makefile.
6829 * Makefile.in (TARGET_CONFIGDIRS): New variable, automatically set
6831 (CONFIG_ARGUMENTS): Likewise.
6832 (CONFIGURE_TARGET_MODULES): New variable.
6833 ($(DO_X)): Loop over TARGET_CONFIGDIRS as well as SUBDIRS.
6834 ($(CONFIGURE_TARGET_MODULES)): New target.
6835 (configure-libg++, configure-libio): New targets.
6836 (all-libg++): Depend upon configure-libg++.
6837 (all-libio): Depend upon configure-libio.
6838 (configure-libgloss, all-libgloss): New targets.
6839 (configure-libstdc++): New target.
6840 (all-libstdc++): Depend upon configure-libstdc++.
6841 (configure-librx, all-librx): New targets.
6842 (configure-newlib): New target.
6843 (all-newlib): Depend upon configure-newlib
6844 (configure-xiberty): New target.
6845 (all-xiberty): Depend upon configure-xiberty.
6849 * configure.in (host i[345]86-*-win32): Expand the
6854 * mpw-configure: Fix sed command file name.
6858 * configure.in (host i[345]86-*-win32): Reduce the
6863 * configure.in: Don't configure ld and gdb for powerpc*-*-winnt*
6864 or powerpc*-*-pe*, since they are not yet supported.
6868 Add PowerMac support and many other enhancements.
6869 * mpw-configure: New option --cc to select compiler to use,
6870 paste options set according to --cc into the generated
6871 Makefile, generate the Makefile by sed'ing the Unix Makefile.in
6872 if mpw-make.sed is present.
6873 * mpw-config.in: Don't test for gC1, test for mpw-touch,
6874 add forward includes for PowerPC include files.
6875 * mpw-build.in: Build using Makefile.PPC if present.
6876 (do-byacc, etc): Remove separate version resource builds.
6877 (do-gas): Build "stamps" before "all".
6878 (do-gcc): Build "stamps-h" and "stamps-c" before "all".
6879 * mpw-README: Update to reflect --cc option, PowerMac support,
6880 and recently-reported compatibility problems.
6884 * cfg-ml-com.in (m68*-*-*): Only build multilibs for
6885 embedded m68k systems (-aout, -coff, -elf, -vxworks).
6886 (--with-multilib-top): Pass to recursive invocations.
6890 * configure.in (noconfigdirs): Disable libg++ and libstdc++ on
6895 * configure.in (noconfigdirs): Disable bfd, binutils, gas, gcc,
6896 gdb, ld and opcodes on v810-*-*.
6900 * Makefile.in (DO_X): Change do-realclean to do-maintainer-clean.
6901 (local-maintainer-clean): New target.
6902 (maintainer-clean): New target.
6903 (realclean): Just depend upon maintainer-clean.
6907 * configure.in (noconfigdirs): Disable gdb on m68k-*-netbsd*.
6911 * configure.in: Build ld in mips*-*-bsd* case.
6915 * config.sub: Accept -lites* OS. From Ian Dall.
6919 * config.sub: recognise mips64vr4300 and mips64vr4300el as valid
6924 * configure.in: treat i386-win32 canadian cross the same as
6925 i386-go32 canadian cross.
6929 * cfg-ml-com.in (powerpc*-*-eabisim): Add support for PowerPC
6930 running under the simulator to build a reduced set of libraries.
6931 (powerpc-*-eabiaix): Add fine grained multilib support added to
6932 other powerpc targets yesterday.
6936 * cfg-ml-com.in (powerpc*): Add support for -disable-biendian,
6937 -disable-softfloat, -disable-relocatable, -disable-aix, and
6938 -disable-sysv to control which multilib libraries get built.
6942 * configure: Add Makefile.tem to list of files to remove in trap
6947 * config.guess (*Linux*): Add missing "exit"s.
6948 Also, need specific check for alpha-unknown-linux (uses COFF).
6952 * config.guess: Merge with FSF:
6955 * config.guess (AIX4): More robust release numbering discovery.
6958 * config.guess (i386-sequent-ptx): Properly get version number.
6961 * config.guess (mips:*:4*:UMIPS): New case.
6965 * configure.in (i386-go32 host): Fix typo (deja-gnu -> dejagnu).
6966 (i386-win32 host): Likewise. Don't build readline.
6970 * Makefile.in (GDBTK_SUPPORT_DIRS): Define and pass as part of
6971 SUPPORT_FILES to submakes.
6975 * Makefile.in (GDB_SUPPORT_DIRS): Add utils.
6976 (DEVO_SUPPORT): Add mpw-README, mpw-build.in, mpw-config.h and
6981 * configure.in (appdirs): Use =, not ==, in test expression when
6982 trying to build the text to print in the warning message for
6987 * cfg-ml-com.in (z8k-*-coff): Add 'std' multilib build.
6991 * config.guess: Recognize lynx-2.3.
6995 * config.sub (z8ksim): Deleted
6996 (z8k-*-coff): New, this is the one true name of the target.
7000 * cfg-ml-pos.in (dotdot): Work around SunOS sed bug.
7004 * config.guess (*:Linux:*:*): First try asking the linker what the
7005 default object file format is (elf, aout, or coff). Then if this
7006 fails, try previous methods.
7010 * configure.in: Don't build newlib for *-*-vxworks5.1.
7014 * configure.in: Don't build newlib for a29k-*-vxworks5.1.
7015 * test-build.mk: Add setting of --with-headers for a29k-vxworks5.1.
7019 * cfg-ml-pos.in (MULTITOP): Trim excess trailing "/.".
7023 * cfg-ml-com.in: New file.
7024 * cfg-ml-pos.in: New file.
7028 * COPYING.NEWLIB: Add HP free copyright to list.
7032 * config.sub: Recognize -eabi* for the system, not just -eabi.
7036 * Makfile.in (DLLTOOL_FOR_TARGET): New name, pass it down.
7037 * config.sub, configure.in (win32): New target and host.
7041 * configure.in: Add i386-pe configuration.
7045 * mpw-build.in (install): Install GDB after LD.
7049 * mpw-config.in (elf/mips.h): Always forward-include, needed
7054 * testsuite: New directory for customer acceptance and whole tool
7059 * configure: If per-host line isn't found, but AC_OUTPUT is found
7060 and a configure script exists, run it instead.
7064 * config.guess: Update from FSF, for alpha-dec-winnt3.5 and Crays.
7068 * configure: Set build_{cpu,vendor,os,alias} to host values when
7069 --build isn't specified.
7073 * Makefile.in (PICFLAG, PICFLAG_FOR_TARGET): New macros.
7074 (FLAGS_TO_PASS): Pass them.
7075 (EXTRA_TARGET_FLAGS): Ditto.
7079 * Makefile.in (all-libg++): Depend on all-libstdc++.
7083 * configure.in (noconfigdirs): Enable all packages for
7084 i386-unknown-netbsd.
7088 * configure.in (noconfigdirs): Don't configure tk for i386-go32
7089 hosted builds (DOS builds)
7093 Changes for ARM based on patches from Richard Earnshaw:
7094 * config.sub: Handle armeb and armel.
7095 * configure.in: Omit arm linker only for riscix.
7099 * config.guess: Update from FSF.
7103 * config.sub: Recognize powerpcle as the little endian varient of
7104 the PowerPC. Recgonize ppc as a PowerPC variant, and ppcle as a
7105 powerpcle variant. Convert pentium into i586, not i486. Add p5
7106 alias for i586. Map new x86 variants p6, k5, nexgen into i586
7111 * configure.in (hppa*-*-lites*): Treat like hppa*-*-*elf*.
7115 * config.sub: Accept -lites* as a basic system type.
7119 * config.guess (*:Linux:*:*): Check for whether the pre-BFD linker is
7120 installed, and if so return linuxoldld as the system name.
7124 * config.guess: Add hppa1.1-hp-lites support.
7128 * configure.in: Don't build newlib for m68k-vxworks5.1.
7132 * configure.in (mips-sgi-irix6): Use mh-irix5.
7136 * Makefile.in (all-gcc): Depend on all-ld (for libgcc1-test).
7140 * test-build.mk: Enable building of shared libraries on IRIX 5 and
7141 OSF/1. Fix compiler flags.
7142 * build-all.mk: Support Linux and OSF/1 3.0. Fix compiler flags.
7146 * configure.in: Recognize --with-newlib.
7147 (sparc-*-sunos4*): Build sim, dejagnu, expect, tcl if cross target.
7151 * Makefile.in: move {all,check,install}-gdb from *_MODULES
7152 to *_X11_MODULES due to gdbtk needing X include files et al.
7156 Merge in support for Mac MPW as a host.
7157 (Old change descriptions retained for informational value.)
7159 * mpw-config.in: Add generic include forwards for cpu-specific
7160 include files in aout and elf directories.
7162 * mpw-configure: Added copyright.
7163 * mpw-config.in: Check for presence of required build tools.
7164 (target_libs): Add newlib.
7165 (target_tools): Add examples.
7166 (Read Me): Generate as "Read Me for MPW" instead.
7167 * mpw-build.in: Base sub-builds on all-foo instead of do-foo.
7168 (all-byacc, do-byacc, all-flex, do-flex, do-newlib): New actions.
7169 (do-gas, do-gcc, do-gdb, do-ld): Build Version.r first.
7171 * mpw-configure: Remove subdir-specific makefile hackery,
7172 delete mk.tmp after using it.
7174 * mpw-build.in (all): Display start and end times.
7176 * mpw-configure (host_canonical): Set.
7177 (target_cpu): Always add to makefiles.
7178 (ARCHDEFS, EMUL): Add to makefile only if nonempty.
7179 (TM_FILE, XM_FILE, NM_FILE): No longer add to makefile.
7180 (mpw-mh-mpw): Look for in srcdir and srcroot.
7181 Use sed instead of mpw-edit-prefix to edit prefix definitions.
7183 * mpw-build.in: (install-only): New target.
7185 * mpw-configure (host_alias, target_alias): Rename from hostalias
7186 and targetalias, add into generated Makefile.
7187 (mk.tmp): If present, add into generated Makefile.
7188 * mpw-build.in (all-gas): Build config.h first before gas proper.
7190 * mpw-configure (config.status): Write only if changed.
7191 * mpw-config.in (readline): Configure it (not built, just used for
7194 * mpw-config.in (elf/mips.h): Add a forward include.
7196 * mpw-config.in: Forward-include most .h files in include into
7198 (readline): Don't build.
7199 mpw-build.in (install): Install GDB.
7201 * mpw-configure (prefix, mpw_prefix): Handle it.
7202 * mpw-config.in (mmalloc, readline): Don't configure.
7203 * mpw-build.in (thisscript): Rename to ThisScript.
7204 Use mpw-build instead of BuildProgram everywhere.
7205 (mmalloc, readline): Don't build.
7206 * mpw-README: New file, basic documentation about the MPW port.
7208 * mpw-config.in: Use forward-include to create include files.
7210 * mpw-configure: Add more things to the top of each configured
7211 Makefile, including contents of config/mpw-mh-mpw.
7212 * mpw-config.in (extra-include): Create this directory and fill it
7213 with Posix-like include files when configuring.
7215 * config.sub (apple, mac, mpw): Add various aliases.
7217 * mpw-build.in: New file, top-level build script fragment for MPW.
7218 * mpw-configure: New file, configure script for MPW.
7219 * mpw-config.in: New file, config fragment for MPW.
7223 * configure.in (host_libs): Remove glob, since it is gone from the
7228 * Makefile.in: define empty GDB_NLM_DEPS var.
7230 * configure.in(target_makefile_frag): use config/mt-netware
7231 for netware targets.
7235 * config.sub: Merge in recent FSF changes. Remove linux special
7244 * build-all.mk: Use CC=cc -Xs on Solaris.
7248 * glob/*: Removed. Schauer's 24 Feb 1994 readline change made us
7250 * Makefile.in: Nuke all references to glob subdirectory.
7254 * configure.in: Fix --enable-shared logic in per-host.
7258 * configure.in (*-hp-hpux[78]*): Use mh-hpux8.
7262 * configure.in (noconfigdirs): Don't build gas on AIX, for
7263 powerpc*-*-aix* as well as for rs6000*-*-aix*.
7267 * configure: Fix --cache-file to work if the file argument is a
7272 * configure: If the --cache-file is used, pass it down to
7273 configure in subdirectories.
7277 * config.sub: add vxworks29k configuration.
7281 * Makefile.in (taz): Do "diststuff" part quietly.
7285 * config.sub: Mini-merge with gcc/config.sub.
7289 * config.guess (IRIX): Sed - to _.
7293 * Makefile.in (source-vault, binary-vault): New targets.
7297 * config.sub: Recognize -eabi as a basic system type.
7301 * configure.in (enable_shared stuff): Fix typo.
7305 * Makefile.in (BASE_FLAGS_TO_PASS): Fix typo in passing LIBCXXFLAGS*.
7309 * Makefile.in (LIBCXXFLAGS_FOR_TARGET): Add -fno-implicit-templates.
7313 * configure.in (rs6000-*-*): Don't build gas.
7317 * Makefile.in: Use /x/x/ instead of /brokensed/brokensed/, to
7318 reduce command line length.
7319 (AS_FOR_TARGET): Check for as.new, not Makefile.
7320 (NM_FOR_TARGET): Check for nm.new, not Makefile.
7324 * config.guess: Merge from FSF.
7328 * configure: Don't use $ when handling program_suffix.
7332 * configure.in: Configure tk for hppa/hpux.
7336 * Makefile.in (LIBGXX_SUPPORT_DIRS): Add libstdc++.
7340 * Makefile.in: Move -fno-implicit-template from CXXFLAGS
7341 to LIBCXXFLAGS. Tests are better run without it.
7345 * Makefile.in (all-ispell): Depend on all-emacs19 instead of all-emacs.
7349 * configure.in (*-*-netware*): Don't configure xiberty.
7353 * configure.in: Remove tk from native_only list.
7357 * build-all.mk: Add mips-ncd-elf target to sun4 targets
7358 for special NCD build.
7362 * Makefile.in (DEVO_SUPPORT): Remove configure.bat and
7363 makeall.bat, they're only useful for binutils snapshots.
7364 (binutils.tar.gz, gas+binutils.tar.gz): Add configure.bat and
7365 makeall.bat to specified SUPPORT_FILES.
7369 * build-all.mk: Add Ericsson targets to sun4 and solaris
7370 hosts. Add BNR's sun4 target to solaris host, so their
7371 build-from-source will be tested in-house first.
7375 * Makefile.in (LIBCFLAGS): New variable.
7376 (CFLAGS_FOR_TARGET): Ditto.
7377 (LIBCFLAGS_FOR_TARGET): Ditto.
7378 (LIBCXXFLAGS): Ditto.
7379 (CXXFLAGS_FOR_TARGET): Ditto.
7380 (LIBCXXFLAGS_FOR_TARGET): Ditto.
7381 (BASE_FLAGS_TO_PASS): Pass them.
7382 (EXTRA_TARGET_FLAGS): Ditto.
7384 * configure.in: Support --enable-shared.
7388 * configure.in (target_libs): Include libstdc++ again.
7389 * config.guess: Update from FSF (for FreeBSD).
7393 * Makefile.in (DEVO_SUPPORT): Include configure.bat and
7395 (DISTDOCDIRS): Add `etc'.
7396 (ETC_SUPPORT_PFX): New variable.
7397 (taz): Include anything from etc starting with a word in
7402 * config.sub: Update for recent FSF changes. Remove obsolete
7403 h8300hds entry. Add -windows* and -osx as basic os. Minor
7408 * configure.in (target_libs): Remove libstdc++ for libg++-2.6.1.
7410 * config.guess: Merge with FSF.
7411 * configure.in: Match on i?86-ncr-sysv4.3, not i?86-ncr-sysv43.
7415 * configure: Since the "trap 0" handler will override the exit
7416 status on many systems, only use it for "exit 1", and make it set
7417 a non-zero exit status; reset it before "exit 0". Also, check
7418 exit status of config.sub, and error out if it failed.
7422 * Makefile.in: (ALL_TARGET_MODULES,INSTALL_TARGET_MODULES) Build
7423 and install libgloss.
7427 * Makefile.in (all-binutils): Depend upon all-byacc.
7429 * configure.in: Don't build emacs on Irix 5.
7433 * configure.in (*-*-netware*): Add libio.
7437 * Makefile.in (ALL_TARGET_MODULES): Add libstdc++.
7438 (CHECK_TARGET_MODULES): Ditto.
7439 (INSTALL_TARGET_MODULES): Ditto.
7440 (TARGET_LIBS): Ditto.
7441 (all-libstdc++): Note dependencies.
7445 * Makefile.in (BINUTILS_SUPPORT_DIRS): Add gas.
7449 * Makefile.in (CXXFLAGS): Use -fno-implicit-templates instead of
7450 -fexternal-templates.
7452 * configure.in (target_libs): Add libstdc++.
7453 (noconfigdirs): Add libstdc++ as appropriate.
7457 * config.guess: Update from FSF.
7461 * configure: Use ${config_shell} when running ${configsub}.
7465 * config.sub: No longer recognize h8300h.
7469 * config.sub: Remove extraneous differences between config.sub and
7474 * Makefile.in (DISTSTUFFDIRS): Add gas.
7478 * COPYING.NEWLIB: New file.
7482 * config.guess (HP-UX): Patch from Harlan Stenn
7487 * config.guess (sun4*:SunOS:*:*): Change '-JL' to '_JL'.
7491 * config.sub: Merge nextstep cleanup from FSF.
7495 * configure.in (arm-*-*): Don't configure ld for this target.
7499 * configure.in (*-*-netware): don't configure libg++, libio,
7504 * configure.in (alpha-dec-osf*): Use osf*, not osf1*. Don't
7505 configure ld--it works, but it doesn't support shared libraries.
7509 * config.guess (*-unknown-freebsd*): Get rid of possible
7510 trailing "(Release)" in version string.
7515 * config.guess: Fix i486-ncr-sysv43 -> i486-ncr-sysv4.3.
7516 Fix type: *-next-neststep -> *-next-nextstep.
7518 * config.guess: Merge from FSF:
7522 * config.guess: Recognize powerpc-ibm-aix3.2.5.
7526 * config.guess: Recognize UnixWare 1.1 (UNAME_SYSTEM is SYSTEM_V
7527 instead of UNIX_SV for UnixWare 1.0).
7531 * Makefile.in (all-gdb): Add dependencies on all-gcc and all-ld
7532 to make gdb/nlm/* build after the compiler and linker.
7536 * config.guess (netbsd, freebsd, linux): Accept any machine,
7538 (m68k-atari-sysv4): Relocate to match FSF version.
7540 * config.guess: More merges from the FSF:
7542 Add a space before function call or macro invocation.
7546 * config.guess: Add trap cmd to remove dummy.c and dummy when
7551 * config.guess (dummy.c): Redirect stderr for `hostinfo' command.
7552 (dummy): Redirect stderr from compilation of dummy.c.
7556 * config.guess: Distinguish between NeXTStep 2.1 and 3.x.
7560 * configure: Accept and ignore --cache*, for compatibility with
7565 * config.guess: Merge from FSF:
7569 * config.guess (Pyramid*:OSx*:*:*): New case.
7570 (PATH): Add /.attbin at end for finding uname.
7571 (dummy.c): Handle i860-alliant-bsd. Follow whitespace conventions.
7575 * config.guess (M88*:DolphinOS:*:*): New case.
7579 * config.guess (AViiON:dgux:*:*): Use TARGET_BINARY_INTERFACE
7580 to select whether to use ELF or COFF.
7584 * config.guess: Recognize i860-stardent-sysv and i860-unknown-sysv.
7588 * config.guess: Guess the OS version for HPUX.
7592 * config.guess (UNAME_VERSION): Recognize aix3.2.4 and aix3.2.5.
7596 * configure.in: Recognize --with-headers, --with-libs, and
7598 * Makefile.in (all-xiberty): Depend upon all-ld.
7602 * configure.in: Change i[34]86 to i[345]86.
7606 * configure (version): A few more tweaks to help message.
7610 * Makefile.in: Remove (for now) librx as a host library,
7611 now that we're building it for target.
7620 * configure.in: Also configure librx.
7624 * Makefile.in: Update various rules to reflect that librx
7625 is now needed for libg++.
7629 * config.sub: Accept mips64orion and mips64orionel as a CPU name.
7633 * configure.in: Configure the examples directory.
7637 * configure: Simplify Jun 2 1994 change.
7641 * change CC to /usr/latest/bin/gcc for lynx host builds, since
7642 /bin/gcc isn't good enough to build gcc.
7646 * Makefile.in (GDB_SUPPORT_FILES): Remove
7647 (setup-dirs-gdb, gdb.tar.gz, make-gdb.tar.gz): Remove old rules.
7648 (gdb.tar.gz): Add new rule to use standard distribution building
7653 * configure.in: Warn about use of /usr/ucb/cc on Solaris. From
7662 * configure: Search current dir first in .gdbinit.
7666 * config.sub: Recognize freebsd (merged from gcc config.sub).
7670 * config.sub: Refer to NeXT's operating system as nextstep.
7672 * config.sub (case $basic_machine): Re-order the cases, to match
7673 the order in the FSF version (which is mostly alphabethical).
7674 Merge in some additions and changes from the FSF.
7678 * config.guess: Recognize m68k-atari-sysv4 and m88k-harris-csux7.
7679 * config.sub: Recognize cxux7.
7680 * configure.in: Use mh-cxux for m88k-harris-cxux*.
7684 * config.sub: Fix typo powerpc -> powerpc-*.
7688 * Makefile.in: `all-emacs19' depends on `all-byacc'.
7690 * Makefile.in: Add all-emacs19 and install-emacs19 rules (in
7691 parallel with all-emacs and install-emacs). Top-level command
7692 `make all-emacs19 CC=gcc' now behaves as `make all-emacs CC=gcc'.
7696 * test-build.mk ($(host)-stamp-stage2-installed): Remove
7697 $(relbindir)/make before doing ``make install'', and use
7698 $(GNU_MAKE) while doing it. Avoids problem on SunOS with
7699 installing over running make binary.
7700 ($(host)-stamp-stage3-installed): Likewise.
7704 * config.guess: Recognize Mach.
7708 * configure: Check ${exec_prefixoption}, not ${exec_prefix}, to
7709 see whether --exec-prefix was used.
7713 * README: Explicitly mention libg++/README. (Zoo's idea.)
7717 * Makefile.in: Add all-librx target similar to all-libproc.
7721 * config.guess: Rearrange tests for Alpha-OSF1 to properly deal
7722 with post 1.2 uname bogosity.
7726 * configure: Remove temporary files on receipt of a signal.
7730 * configure: If there is a package_makefile_frag, remove
7731 ${subdir}/Makefile.tem after copying it in.
7735 * build_all.mk: support rs6000 lynx identifies itself as
7736 rs6000-lynx-lynxos2.2.2. Also, use /usr/cygnus/progressive/bin/gcc
7737 since /bin/gcc is too feeble to compile a modern gcc.
7741 * brought devo/test-build.mk update-to-date with progressive/
7742 test-build.mk. Add lynx targets and hppa flag info.
7746 * configure.in: Use mh-ncrsvr43. Patch from
7751 * config.guess (i386-unknown-bsdi): No longer need to
7752 check #if defined(__bsdi__) && defined(__i386__).
7756 * configure: Set program_transform_nameoption correctly.
7760 * brought build-all.mk update-to-date with progressive build-all.mk,
7761 added new targets and hppa info.
7765 * configure: If config.guess result is a prefix of the user
7766 specified target, assume a native build and use the user specified
7767 target as the host alias. Remove SunOS patch suffix removal hack.
7768 * configure.in: Remove SunOS patch suffix removal hack.
7770 * Makefile.in (CROSS_CHECK_MODULES): Remove check-flex, since it's
7771 in NATIVE_CHECK_MODULES.
7775 * Makefile.in: Rename HOST_ONLY to NATIVE.
7776 * configure: Delete SunOs patch suffix from host_canonical
7777 and build_canonical variables that are prepended to Makefiles.
7778 * configure.in: Add comments for easier maintenance.
7782 * Makefile.in: Add all-libproc target similar to all-gui.
7786 * Makefile.in (CHECK_MODULES): split into
7787 HOST_ONLY_CHECK_MODULES and CROSS_CHECK_MODULES.
7791 * config.guess (i386-unknown-bsdi): New system to guess.
7795 * Makefile.in: Add all-gui target (but not yet build by "all").
7799 * config.sub: Move deletion of patch suffix from here...
7800 * configure.in: To here, at Ian's suggestion. The top-
7801 level scripts might need to know of a patch level.
7805 * config.sub: Strip off patch suffix so rtl is recognized
7806 as a sunos4.1.3 machine, even though it's been patched.
7810 * Makefile.in (INSTALL_LAST): Delete.
7811 (INSTALL_DOSREL): New.
7815 * configure.in: Use ld for i[34]86-*-sysv4* and sparc-*-solaris2*.
7816 Don't set use_gnu_ld to no for *-*-sysv4; that only controls
7817 whether we pass down --with-gnu-ld anyhow.
7821 * Makefile.in (INSTALL_LAST): Change operation so it works
7822 on more flavors of make.
7823 * configure.in (go32): Don't build libg++ or libio.
7827 * Makefile.in (Move HOST_PREFIX_1 and friends up so
7828 they can be overriden by templates.
7832 * configure.in (target==go32): Don't build gdb.
7833 * dosrel: New directory.
7837 * configure.in (host==go32): Configure dosrel too.
7838 * Makefile.in (INTALL_TARGET): Call INSTALL_LAST last.
7839 (HOST_CC, HOST_PREFIX, HOST_PREFIX_1): Undefine, they should
7840 be set by incoming names or templates.
7841 (INSTALL_LAST): New rule.
7845 * config.sub (sparclitefrw, sparclitefrwcompat): Don't set the os.
7849 * configure.in (appdirs): New variable. Currently empty, but will
7850 be used in gas distribution. If nonempty, lists a set of
7851 directories at least one of which must get configured, or top
7852 level configuration is considered to have failed.
7853 (rs6000-*-lynxos*): Use new file name.
7857 Eliminate XTRAFLAGS.
7858 * Makefile.in (CC_FOR_TARGET): If newlib exists, refer to the
7859 newlib include files using -idirafter, and also use -nostdinc.
7860 (CXX_FOR_TARGET): Likewise.
7861 (XTRAFLAGS): Removed.
7862 (BASE_FLAGS_TO_PASS): Remove XTRAFLAGS_FOR_TARGET.
7863 (EXTRA_HOST_FLAGS): Remove XTRAFLAGS.
7864 (EXTRA_TARGET_FLAGS, EXTRA_GCC_FLAGS): Likewise.
7865 ($(DO_X)): Don't pass down XTRAFLAGS.
7869 * configure.in (mips*-dec-bsd*): New target; do build linker.
7870 (mips*-*-bsd*): New target; don't build linker.
7874 * configure.in: support rs6000-*-lynxos* configuration.
7875 support sunos4 as a cross target.
7877 * config.sub: look for lynx*, not lynx since the OS version may
7878 legitimately be part of the name.
7882 * configure.in (i[34]86-*-sco*): Move to be with other i386
7884 (romp-*-*): New target. Skip various binary utilities.
7885 (vax-*-*): New target. Don't build newlib.
7886 (vax-*-vms): Renamed from *-*-vms. Don't build opcodes or newlib.
7890 * configure.in: Only set host_makefile_frag if config
7895 * install.sh: If $dstdir exists, don't check whether each
7900 * test-build.mk (HOLES): Add sleep; used by rcs/src/conf.sh.
7904 * configure.in (*-*-lynxos*): Don't configure newlib for either
7905 native or cross Lynx.
7909 * config.sub (sparc64-elf): Fix os.
7910 (z8k): Remove duplicate.
7914 * Makefile.in (gcc-no-fixedincludes): Touch gcc/include/fixed, not
7915 gcc/stmp-fixproto, to try to prevent fixproto from being run.
7919 * configure: Make file links cleanly even if Lynx fails on
7920 an NFS symlink (at least fail cleanly).
7924 * test-build.mk (CC): For mips-sgi-irix4, change -XNh1500 to
7929 * configure: Unknown options are fatal again.
7933 * configure: Ignore --x-includes and --x-libraries, for Autoconf
7938 * build-all.mk: Add `clean' target.
7942 * config.guess: Add SINIX support.
7943 * configure.in: Add mips-*-sysv4* support.
7947 * build-all.mk: Document all useful targets.
7948 If canonhost is sparc-sun-solaris2.3, change it to sparc-sun-solaris2.
7949 If canonhost is mips-sgi-irix4.0.5H, change it to mips-sgi-irix4.
7953 * configure: Support --silent, --quiet.
7957 * configure: Support --disable-FEATURE.
7961 * config.guess: Recognize NCR running SVR4.3.
7965 * config.guess: Make BSDI generate i386-unknown-bsd386.
7970 * configure.in (powerpc-*-aix*): Treat like rs6000-*-*.
7974 * configure: Make unrecognized options give nonfatal warnings
7975 instead of fatal errors, and pass them to any subdirectory
7976 configures in case they recognize them.
7977 Make --x equivalent to --with-x.
7981 * configure: Add --enable-* options. Clean up usage message and
7986 * Makefile.in (NM_FOR_TARGET): Build tree version is now nm.new.
7990 * configure.in (hppa*-*-*): Enable binutils.
7994 * config.sub: Recognize cisco.
7998 * Makefile.in (CXXFLAGS): Add -fexternal-templates.
8002 * config.guess: about target *-hitachi-hiuxwe2, don't print more
8003 than one configuration name. Add comment.
8007 * config.guess: about target *-hitachi-hiuxwe2, fixed
8008 machine guessing order. [Hitachi's CPU_IS_HP_MC68K
8009 macro is incorrect.]
8013 * Makefile.in (TAGS): Just build TAGS in each subdirectory, rather
8014 than the "make ls" stuff which used to be here.
8018 * config.guess: Recognize i[34]86-unknown-freebsd.
8023 * configure.in (noconfigdirs for alpha): Remove libg++ and libio.
8027 * config.guess: Check for ptx.
8031 * config.sub: Add os9k checking.
8035 * config.guess: Handle OSF1 running on HPPA processors
8039 * configure: If subdir configure fails, print out a message with
8040 subdirectory name, in case subdir's configure code didn't identify
8045 * configure.in: Remove embedded newlines from configdirs.
8046 Avoid mismatches of substrings. Fix matching strings at end
8049 Fri Feb 11 15:33:33 1994 Stu Grossman (grossman at cygnus.com)
8051 * config.guess: Add Lynx/rs6000 config support.
8055 * configure.in (alpha-dec-osf1*, alpha*-*-*): Build gas.
8059 * configure.in (hppa*-*-osf*): Treat this just like most other
8060 PA configurations (eg no binutils or ld).
8061 (hppa*-*-*elf*): These configurations have binutils and ld.
8069 * configure.in (rs6000-*-*): Build gas.
8073 * Makefile.in: Avoid bug in losing hpux sed.
8077 * Makefile.in, test-build.mk: Remove MUNCH_NM; it was only needed
8078 for GDB and GDB has been fixed to not need it.
8082 * config.guess: Recognize vax hosts.
8086 * configure (while loop): Don't use "break 2" inside case
8087 statement -- the case statement isn't an enclosing loop.
8091 * config.guess: Clean up NeXT support, to allow nextstep
8092 on Intel machines. Make OS be nextstep.
8096 * config.guess: Add alternate forms for Convex.
8098 Thu Jan 20 16:13:41 1994 Stu Grossman (grossman at cygnus.com)
8100 * configure: Completely rewrite option processing. Take
8101 advantage of pattern-matching to avoid invoking test frequently.
8102 Also clean up host and target defaulting logic.
8106 * Makefile.in: Replace all occurrances of "rootme" with "r" and
8107 "$${rootme}" with "$$r", to increase the likelihood that the do-*
8108 commands (plus user environment) will fit SCO limits.
8112 * configure.in: Don't issue warnings about directories which are
8113 not being configured if -norecursion is set. Correct test for
8114 --with-gnu-as and --with-gnu-ld to not get confused by substring
8117 * configure.in: Don't build gas for alpha-dec-osf1*.
8119 Tue Jan 4 17:10:19 1994 Stu Grossman (grossman at cygnus.com)
8121 * configure: Back out Per's change of 12/19/1993. It changes the
8122 behavior of configure in unexpected and confusing ways.
8124 Also, use different delim char when calculating
8125 program_transform_name so that the name can contain slashes.
8129 * configure.in, config.sub: Add support for VSTa micro-kernel.
8133 * configure.in: Nuke hacks which were used to get a special
8134 version of GAS for HPPA configurations.
8138 * configure: If only ${target_alias} is given, use that
8139 as the default for ${host_alias}.
8140 * configure: Add missing back-slashes before nested quotes.
8144 * Makefile.in (BASE_FLAGS_TO_PASS): add YACC=$(BISON)
8148 * config.guess: Recognize some Tektronix configurations.
8153 * config.sub: Match any flavor of SH.
8157 * configure.in: Don't try to configure newlib for Alpha.
8161 * configure.in: Don't build ld for Irix 5. Don't build gas,
8162 libg++ or libio for any Alpha target.
8164 * configure.in (mips*-sgi-irix5*): New target; use mh-irix5.
8168 * Makefile.in (GZIPPROG): Renamed from GZIP, which gzip uses for
8169 default arguments -- so it tried to compress itself.
8173 * configure.in (notsupp): ensure that a space is always at the end
8174 of the configdirs list, since the grep checks for an explicit space
8178 * configure.in (target i386-sysv4.2): don't build ld, since static
8179 versions of many libraries are not available.
8183 * config.guess: Recognize Apollos (using environment variables).
8184 * configure.in: Don't configure ld, binutils, or gprof for Apollo.
8188 * config.guess: Recognize Sony news mips running newsos.
8192 * Makefile.in (all-cygnus, build-cygnus): "fi else" needs to be
8193 "fi ; else" for bash.
8197 * Makefile.in (BASE_FLAGS_TO_PASS): pass SHELL.
8201 * config.sub: accept unixware as an alias for svr4.2.
8202 Fix some inconsistancies with the gcc version.
8206 * Makefile.in (DISTDOCDIRS): Add gdb.
8210 * Makefile.in (DISTDOCDIRS): Add libg++ and libio.
8214 * Makefile.in (taz): Only build "info" in DISTDOCDIRS.
8215 (DISTDOCDIRS): Don't assume libg++ and gdb folks necessarily want
8220 * config.sub: Accept hiux* as an OS name.
8222 * Makefile.in: Change RUNTEST_FLAGS back to RUNTESTFLAGS per
8223 etc/make-stds.texi. The underscore came from gcc, and dje now
8224 agrees that RUNTESTFLAGS is the correct name.
8228 * install.sh: Remove 'set -e'. It makes any conditionals
8229 in the script useless.
8231 * config.guess: Automatically recognize arm-acorn-riscix
8236 * Makefile.in: Change RUNTESTFLAGS to RUNTEST_FLAGS
8240 * Makefile.in (DISTDOCDIRS): New variable.
8241 (taz): Edit local Makefile.in sooner, instead of proto-toplev
8242 Makefile.in later. Build "info" and "dvi" in DISTDOCDIRS.
8246 * configure.in (hppa target): check the source directory for the
8251 * config.sub: Allow -aout* and -elf*.
8255 * configure.in: Don't build ld on i386-solaris2, same as for
8260 * Makefile.in (taz): Add texinfo/lgpl.texinfo (for libg++).
8264 * configure.in: Configure gdb for alpha.
8268 * Makefile.in (CXXFLAGS): Add -O.
8272 * config.guess: added support for DG Aviion
8276 * configure.in: Produce warning message for subdirectories not
8277 configurable for this host/target combination. Don't try to
8278 configure gdb for vms.
8282 * Makefile.in (taz): Replace "byacc" with "bison -y" in the
8283 appropriate files before making "diststuff".
8284 (DISTBISONFILES): New var: list of files to be edited.
8285 (DISTSTUFFDIRS): Add binutils.
8289 * config.sub: also handle mipsel and mips64el (for little endian mips)
8293 * configure.in: Add * to end of all OS names.
8297 * configure.in: Build newlib for LynxOS native.
8301 * config.guess: Add support for delta 88k running SVR3.
8303 * configure.in: Add comment about HP compiler vs. emacs.
8307 * configure.in: don't build ld on solaris2 (not a viable option
8308 due to bugs in getpwnam & getpwuid)
8312 * configure.in: Accept alpha-dec-osf1*, not just -osf1, since
8313 config.guess will produce a full version number.
8317 * configure.in: Build linker and binutils for alpha-dec-osf1.
8321 * Makefile.in: Remove -O from CXXFLAGS for consistency with CFLAGS,
8322 and gdb/testsuite/Makefile.in.
8326 * configure.in: recognize mips*- instead of mips-
8330 * config.sub: Accept linux*coff and linux*elf as operating
8335 * config.sub: Recognize mips64, and mips3 as an alias for it.
8339 * configure.in: Remove alpha-dec-osf*, no longer necessary now that
8340 gdb knows how to handle OSF/1 shared libraries.
8344 * configure.in: Recognize hppa*-*-hiux* (currently synonym for hpux).
8345 * config.guess: Recognize Hitachi's HIUX.
8346 * config.sub: Recognize h3050r* and hppahitachi.
8347 Remove redundant cases for hp9k[23]*.
8351 * configure.in: default to '--with-gnu-as' and '--with-gnu-ld'
8352 if gas and ld are in the source tree and are in ${configdirs}.
8353 If ${use_gnu_as} or ${use_gnu_ld} are 'no', then don't set the
8354 --with options (but still pass them down on the command line,
8355 if they were explicitly specified).
8359 * configure: substitute SHELL value in Makefile.in with
8364 * configure.in: Build gas, ld, and binutils for *-*-sysv4* and
8365 *-*-solaris2* targets.
8369 * Makefile.in: define M4, and pass it down to sub-makes;
8370 all-autoconf now depends on all-m4
8374 * Makefile.in ({AR,RANLIB}_FOR_TARGET): make contingent on
8375 presence of {ar,ranlib} instead of a configured directory
8379 * config.guess: Accept 34?? as well as 33?? for NCR.
8383 * configure.in: grab mt-hppa for HPPA targets; use 'gas ' instead
8384 of 'gas' in sed commands, since 'gash' is now in the tree as well.
8388 * configure: grab values for $(CC) and $(CXX) from the
8389 environment, so that someone can do "CC=gcc configure; make" and
8390 have it work right (matching the way that autoconf works now)
8392 * configure.in, Makefile.in: add support for gash, the tcl
8395 * config.guess: add NetBSD variants (hp300, x86)
8399 * install.sh: Support -d option (in the manner of SunOS 4 install,
8400 as it is more deterministic than that of GNU install)
8401 (chmodcmd): Set file to mode 755 by default (should also do default
8402 chgrp and chown, but I don't feel like dealing with that now)
8406 * config.sub: Remove h8300hhms alias.
8410 * configure.in: Match *-*-solaris2* not *-sun-solaris2*.
8414 * Makefile.in (gcc-no-fixedincludes): touch stmp-fixproto as well
8419 * config.sub: recognize m88110-bug-coff.
8423 * Makefile.in (all-libio): all dependencies on the toolchain used
8424 to build this (gcc, gas, ld, etc)
8428 * config.guess: Deal with OSF/1 1.3 on alpha.
8432 * install.sh: add some 'else true' clauses for portability
8434 * configure.in: don't build libio for h8[35]00-*-* targets
8438 * Makefile.in: Add support for new libio.
8442 * install.sh: If one command fails, don't try the rest. Don't try
8443 to remove $dsttmp (via trap) unless we have already created it.
8444 If $src doesn't exist, detect it and exit with an error.
8446 * config.guess: Recognize BSD on hp300.
8450 * config.guess: Map (9000/[34]??:HP-UX:*:*) to m68k-hp-hpux.
8455 * Makefile.in (all-send-pr): depends on all-prms
8459 * config.guess: Fix typo (9000/8??:4.3bsd -> 9000/7??:4.3bsd).
8464 Added test for mips-mips-riscos5.
8468 * configure.in: use mh-hp300 for 68k HP hosts
8472 * configure: add support for CONFIG_SHELL, so that you can use
8473 some alternate shell for evaluating configure scripts
8477 * Makefile.in (make-gdb.tar.gz): Sed bug reporting address
8479 distribution archive.
8480 * Makefile.in (COMPRESS): Remove def.
8481 * Makefile.in (gdb.tar.gz, make-gdb.tar.gz): Renamed from
8482 gdb.tar.Z and make-gdb.tar.Z respectively.
8483 * Makefile.in (make-gdb.tar.gz): Now only build gzip'd archive.
8484 * Makefile.in (make-gdb.tar.gz): Minor changes to move closer
8485 to convergence with 'taz' target in Makefile.in.
8489 * install.sh (dsttmp): use trap to ensure that tmp files go
8490 away on error conditions
8494 * Makefile.in (BASE_FLAGS_TO_PASS): remove LOADLIBES
8498 * Makefile.in (install-dirs): Deal with a prefix like /gnu;
8499 its parent is '/' not ''.
8501 * Makefile.in (DEVO_SUPPORT): Add comments about ChangeLog.
8505 * configure: if ${newsrcdir}/configure doesn't exist, don't assume
8506 that ${newsrcdir}/configure.in does.
8510 * test-build.mk: support for CONFIG_SHELL
8514 * config.sub (netware): Add as a basic system type.
8518 * Makefile.in (Makefile): depend on configure.in. Also drop the
8519 $(srcdir)/ from the dependency on Makefile.in.
8523 * config.sub: Recognize h8300hhms as h8300h-hitachi-hms.
8524 (h8300hhms is temporary until multi-libraries are implemented).
8525 * configure.in: Handle h8300h too.
8529 * config.guess: Recognize dpx/2 as m68k-bull-sysv3.
8533 * configure: Remove extraneous output when guessing host type.
8534 * config.guess: Remove extraneous output when guessing using C
8535 compiler rather than uname, or when guessing fails.
8537 Wed Jul 7 17:58:14 1993 david d `zoo' zuhn (zoo at rtl.cygnus.com)
8539 * Makefile.in: remove all.cross and install.cross targets
8541 * configure: remove CROSS=-DCROSS_COMPILE and ALL=all.cross
8546 * configure.in (target sh): Build gprof.
8548 Thu Jul 1 16:52:56 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8550 * config.sub: change -solaris to -solaris2
8554 * configure.in: Use config/mh-riscos for mips-*-sysv*.
8558 * configure: Correct error message for missing Makefile.in to
8559 print correct directory.
8561 Tue Jun 29 13:52:16 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8563 * install.sh: kludge around 386BSD shell bug
8567 * config.guess: Recognize NeXT.
8568 * config.guess: Recognize i486-ncr-sysv4.
8569 * Makefile.in (taz): rm $(TOOL)-$$VER before linking.
8573 * Makefile.in (MAKEINFOFLAGS): New variable.
8574 (FLAGS_TO_PASS): Pass MAKEINFO as MAKEINFO MAKEINFOFLAGS.
8575 * build-all.mk, test-build.mk: Pass down --no-split as
8576 MAKEINFOFLAGS when hosted on DOS. Compile DOS hosted without -g.
8580 * Makefile.in (DEVO_SUPPORT): Add COPYING COPYING.LIB install.sh.
8584 * Makefile.in (libg++.tar.z): New rule.
8585 * Makefile.in (taz): Replace 'configure -rm' by 'make distclean'.
8586 * Makefile.in (taz): Only do a single chmod.
8588 Fri Jun 18 12:03:10 1993 david d `zoo' zuhn (zoo at majipoor.cygnus.com)
8590 * install.sh: don't use dirname anymore (replaced with sed usage)
8594 * Makefile.in: Change extension for gzip'd files from '.z' to
8595 '.gz' per new FSF standard usage.
8597 Thu Jun 17 16:58:50 1993 david d `zoo' zuhn (zoo at majipoor.cygnus.com)
8599 * configure: put quotes around the final value of program_transform_name
8601 Tue Jun 15 16:48:51 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8603 * Makefile.in: new install.sh support; update install-info rules
8607 * configure.in: Build diff for crosses, but not for go32 host.
8609 * configure.in: Build gprof only for native, and don't build it
8610 for mips-*-*, rs6000-*-*, or i[34]86-*-sco*.
8612 Mon Jun 7 13:12:11 1993 david d `zoo' zuhn (zoo at deneb.cygnus.com)
8614 * configure.in: don't build gas,ld,binutils on for *-*-sysv4
8618 * configure.in (host_tools): Add prms.
8620 Fri Jun 4 13:30:42 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8622 * Makefile.in: install gcc, do installation of $(INSTALL_MODULES)
8623 with $(FLAGS_TO_PASS) on the command line
8625 * config.sub: Recognize lynx and lynxos
8629 * config.sub: Accept -ecoff*, not just -ecoff.
8633 * Makefile.in (taz): Use .gz suffix instead of .z.
8634 (binutils.tar.gz, gas+binutils.tar.gz, gas.tar.gz): Fixed target
8637 Thu Jun 3 00:27:06 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8639 * Makefile.in (vault-install): add an 'else true' (for Ultrix)
8641 Wed Jun 2 18:19:16 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8643 * Makefile.in (install-no-fixedincludes): install gcc last, so
8644 that rebuilds that might happen during 'make install' don't get
8645 bogus gcc include files
8649 Change from Utah for HPPA support:
8650 * config.guess: Recognize hppa1.x-hp-bsd.
8654 * config.guess: Add support for Motorola Delta 68k, up to r3v7.
8657 Tue Jun 1 17:48:42 1993 Rob Savoye (rob at darkstar.cygnus.com)
8659 * config.sub: Add support for rom68k and bug boot monitors.
8663 * Makefile.in: Make all-opcodes depend on all-bfd.
8667 * config.guess: Added special check for i[34]86-univel-sysv4*.
8671 * config.guess: For i[34]86-unknown-sysv4 use UNAME_MACHINE for
8672 the processor rather than assuming i486.
8676 * config.guess: Recognize SunOS6 as Solaris3.
8680 * config.guess: Fix typo. Avoid #elif (not in K&R 1).
8681 Recognize SunOS 5.* only (and not [6-9].*) as being Solaris2.
8685 * build-all.mk (all-cross): New target for Canadian Cross.
8686 Added Q2 go32 targets.
8687 * test-build.mk: Configure go32 cross sparclite-aout and
8688 mips-idt-ecoff -with-gnu-ld. Moved build binary directory from
8689 PARTIAL_HOLE_DIRS to BUILD_HOLES_DIRS.
8691 Mon May 24 15:30:06 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8693 * configure.in: fix Alpha GDB typo; also, don't build DejaGnu for
8694 GO32 hosted toolchains
8696 Mon May 24 14:18:41 1993 Rob Savoye (rob at darkstar.cygnus.com)
8698 * configure: change so "-exec-prefix" gets passed down rather
8699 than "-exec_prefix" so autoconf generated Makefiles get the
8700 exec_prefix set right.
8702 Fri May 21 10:42:25 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8704 * config.guess: get the Solaris2 minor version number
8706 * Makefile.in: add standards.texi and make-stds.texi to ETC_SUPPORT
8710 * config.guess: Recognize some Sequent platforms.
8712 Thu May 20 14:33:48 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8714 * Makefile.in: added the vault-install target
8716 * configure.in: actually use the Sun3 makefile fragment that's in
8717 config, also added the release dir to configdirs
8721 * Makefile.in (taz): Fix modes on stuff in $(TOOL) dir also.
8723 Tue May 18 20:26:41 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8725 * configure.in: remove some program from Alpha targetted toolchains
8729 * Makefile.in (DISTSTUFFDIRS): Renamed from PROTODIRS. Add ld and
8731 (taz): Run "make diststuff" in those directories instead of "make
8732 proto-dir". Look for "VERSION=" only at start of line in subdir
8733 Makefile. Use "gzip -9" for compression.
8734 (TEXINFO_SUPPORT, DIST_SUPPORT, BINUTILS_SUPPORT_DIRS): New vars.
8735 (binutils.tar.z): New target.
8739 * Makefile.in (taz): Include gpl.texinfo.
8743 * Makefile.in (setup-dirs): Merged into "taz" target.
8744 (taz): Only do `proto-dir' stuff if a directory is actually needed
8749 * Makefile.in (MUNCH_NM): New variable, defined to be $(NM).
8750 (FLAGS_TO_PASS): Pass down MUNCH_NM.
8751 (HOST_CC, HOST_PREFIX, HOST_PREFIX_1): New variables.
8752 (EXTRA_GCC_FLAGS): Pass down HOST_* variables.
8753 (gcc-no-fixedincludes): Correct for current gcc Makefile.
8757 * Makefile.in (make-gdb.tar.Z): Add configure, config.guess,
8758 config.sub, and move-if-change to gdb testsuite distribution
8759 archive, so the testsuite can be extracted, configured, and
8760 run separately from the gdb distribution. Blow away the Chill
8761 tests that require a Chill compiled executable, since GNU Chill
8762 is not yet publically available.
8764 Mon May 10 17:22:26 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8766 * test-build.mk: set environment variables in a single command,
8767 instead of a list of assignments and exports
8769 * config.guess: recognize Alpha/OSF1 systems
8773 * configure: Change help message to prefer --options rather than
8778 * config.sub: Convergent Tech. "miniframe" uses m68010, sez
8780 * config.guess: Recognize miniframe.
8782 Sun May 9 17:47:57 1993 Rob Savoye (rob at darkstar.cygnus.com)
8784 * Makefile.in: Use srcroot to find runtest rather than rootme.
8785 Pass RUNTESTFLAGS and EXPECT down in BASE_FLAGS_TO_PASS.
8789 * test-build.mk: Extensive additions to support building on a
8790 machine other than the host.
8794 * configure (tooldir): Fix for i386-aix again.
8798 * configure, Makefile.in: Change definition of $(tooldir)
8803 * config.guess: Recognize i[34]86/SVR4.
8807 * Makefile.in (all-gdb): gdb depends on sim.
8811 * Makefile.in (gdb.tar.Z): Make prototype gdb testsuite directory
8812 at the same time we make the prototype gdb directory.
8813 * Makefile.in (make-gdb.tar.Z): Make the testsuite distribution
8814 files at the same time as the gdb base release distribution.
8818 * Makefile.in (check): Use individual check targets rather than
8824 * config.sub: Use sysv3.2 not sysv32 for canonical OS
8825 for System V release 3.2.
8829 * config.sub: Recognize hppaosf.
8830 * configure.in: Do configure ld/binutils/gas for it.
8834 * configure (tooldir): Alter syntax used to set this, for systems
8835 where "\$" isn't handled right, like i386-aix.
8839 * configure: Pass program-transform-name, not
8840 program_transform_name, to recursive configures.
8844 * Makefile.in (gas+binutils.tar.z): New rule for building snapshots
8849 * config.guess: Recognize AIX3.2 as distinct from 3.1.
8851 Sat Apr 17 17:19:50 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8853 * configure.in: rename m88k-motorola-m88kbcs to m88k-motorola-sysv
8857 * Makefile.in (PRMS): Set back to all-prms.
8861 * test-build.mk: Pass -with-gnu-as for known MIPS native and MIPS
8862 targets, rather than for MIPS hosts.
8864 Fri Apr 9 13:51:06 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8866 * configure.in: add comment for --with-x default values
8868 * config.guess: handle Motorola Delta88 box for SVR3 and SVR4.
8870 * Makefile.in: add check-* targets for each of the directories in
8871 the tree. Add a definition of RUNTEST that will use the one we
8872 just built, if it exists. Pass this down via FLAGS_TO_PASS.
8876 * configure.in: Removed obsolete references to bfd_target and
8877 target_makefile_frag.
8879 * build-all.mk: Set assorted targets for Q2.
8880 * config.sub: Recognize z8k-sim and h8300-hms.
8881 * test-build.mk: Really don't pass host to configure.
8882 (HOLES): Added uname.
8886 * configure: Handle an empty program-prefix, program-suffix or
8887 program-transform-name correctly.
8891 * build-all.mk: -G 8 no longer required for MIPS targets.
8892 * test-build.mk: Don't pass host argument to configure; make it
8897 * Makefile.in (gdb.tar.Z): Fix for building gzip'd distribution.
8898 * Makefile.in (COMPRESS): New macro, like GZIP.
8902 * test-build.mk: Use -with-gnu-as for mips-sgi-irix4 as well.
8904 * build-all.mk: Set GCC to gcc -O -G 8 for MIPS targets, since gcc
8905 with gas currently defaults to -G 0.
8909 * Makefile.in (all-flex): flex depends on byacc.
8911 * build-all.mk: If host not specified, use config.guess. Pass TAG
8912 to test-build.mk as RELEASE_TAG.
8913 * test-build.mk (configargs): New variable containing arguments to
8914 pass to configure. Set to -with-gnu-as on mips-dec-ultrix.
8915 (FLAGS_TO_PASS): Pass down RELEASE_TAG.
8917 * config.guess: Use /bin/uname when checking -X argument on SCO,
8918 to avoid invoking GNU uname which doesn't understand -X.
8920 * test-build.mk: Don't use /usr/unsupported/bin/as on AIX.
8922 * configure.in: Build gas for mips-*-*.
8926 * Makefile.in (all.normal): insert missing backslash.
8930 * build-all.mk: Bump -XNh value to 1500 to match gcc requirements.
8932 * Makefile.in: Complete overhaul to merge many almost identical
8937 * Makefile.in (setup-dirs-gdb): Renamed from setup-dirs.
8938 (gdb.tar.Z): Adjusted.
8940 * Makefile.in (setup-dirs, taz): New targets; should be general
8941 enough to adapt for gdb sometime. Build only .z file.
8942 (gas.tar.z): New target.
8946 * build-all.mk: Use CC=cc -Xs on Solaris.
8951 for handling BISON for FSF releases.
8955 * configure: Actually implement the change zoo just documented.
8957 Wed Mar 24 13:02:44 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
8959 * configure: when using config.guess, only set target_alias when
8960 it's not already been set (ie, on the command line)
8962 Mon Mar 22 23:07:39 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8964 * Makefile.in: add installcheck target, set PRMS to install-prms
8966 Sun Mar 21 16:46:12 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8968 * configure: add support for package_makefile_fragment, handle the
8969 case where a directory has a configure.in file but no Makefile.in
8970 more gracefully (with an actual understandable error message, even);
8971 add support for --without (and add this to the usage message); also
8972 explicitly add a --host=${host_alias} to the command line when
8973 config.guess is used
8977 * configure: Must use both --host and --target in recursive calls.
8981 * Makefile.in: Change deja-gnu to dejagnu.
8985 * configure.in (h8300-*-*, h8500-*-*): Don't build libg++.
8987 Fri Mar 12 18:30:14 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
8989 * configure.in: canonicalize all instances to *-*-solaris2*,
8990 also strip out a number of tools to not build for go32 host
8994 * config.guess: add GPL.
8996 * Makefile.in, config.guess, config.sub, configure: bump
9001 * Makefile.in (do-info): Removed obsolete check for existence of
9004 * Makefile.in (MAKEOVERRIDES): Define to be empty.
9006 Wed Mar 10 03:11:56 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
9008 * Makefile.in: a couple of 'else true' for decstation,
9011 * configure.in: configure tclX too; don't remove Tk on RS/6000 anymore
9015 * Makefile.in (setup-dirs): change invocation of make to $(MAKE).
9017 Mon Mar 8 14:52:11 1993 Ken Raeburn (raeburn@cambridge)
9019 * config.guess: Recognize i386-ibm-aix (PS/2).
9020 * configure.in: Use config/mh-aix386 file for it.
9024 * Makefile.in (GCC_FOR_TARGET): Eliminated definition; use
9025 CC_FOR_TARGET instead.
9026 (BASE_FLAGS_TO_PASS): Pass GCC_FOR_TARGET=$(CC_FOR_TARGET).
9030 * Makefile.in: Add sim to list of directories sent with gdb
9034 * configure.in: Put back mips-dec-bsd* case.
9039 * configure.in (vax-*-ultrix2*): Add Ultrix 2.2 triplet.
9040 * config.guess: Change 'VAX*:ULTRIX:*:*' to 'VAX*:ULTRIX*:*:*'.
9042 Tue Mar 2 18:11:03 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
9044 * configure.in: remove no-op mips-dec-bsd* in "case $target"
9046 * Makefile.in (dir.info): only run gen-info-dir if it exists,
9047 (install-info): install dir.info only if it exists,
9048 (all-expect, install-expect): pass along X11_FLAGS_TO_PASS
9052 * configure.in: For vms target, skip bfd, ld, binutils. Do build
9053 gas for mips-dec-bsd.
9057 * configure (makesrcdir): If ${srcdir} is relative and not ".",
9058 and ${subdir} is not ".", set makesrcdir based on ${invsubdir}.
9062 * configure.in: Added "dejagnu" to hosttools list.
9066 * config.sub, configure.in, config.guess: Add support
9067 for Bosx, an AIX variant from Bull.
9072 * devo/dejagnu: Initial creation of devo/dejagnu.
9073 Migrated dejagnu testcases and support files for testing software
9074 tools to reside as subdirectories, currently called "testsuite",
9075 within the directory of the software tool. Migrated all programs,
9076 support libraries, etc. beloging to dejagnu proper from
9077 devo/deja-gnu to devo/dejagnu. These files were moved "as is"
9078 with no modifications. The changes to these files which will
9079 allow them to configure, build, and execute properly will be made
9084 * Makefile.in: Change send_pr to send-pr.
9085 * configure.in: Likewise.
9086 * send_pr: Renamed directory to send-pr.
9090 * Makefile.in: Add some extra semi-colons (needed if SHELL=bash).
9094 * README: Update for gdb-4.8 release.
9095 * Makefile.in (gdb.tar.Z): Add texinfo/tex3patch. Build
9096 gdb-xxx.tar.z (gzip'd) file also.
9098 Thu Feb 18 09:16:17 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
9100 * Makefile.in: make all-diff depend on all-libiberty
9104 * config.guess: add vax-ultrix in the spirit of mips-ultrix.
9106 Tue Feb 16 05:57:15 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
9108 * configure.in, Makefile.in: add hello, tar, gzip, recode, indent
9112 * Makefile.in (DEVO_SUPPORT): Remove etc directory
9113 (ETC_SUPPORT): Only add the files GDB wants from etc/.
9114 (gdb.tar.Z): Use ETC_SUPPORT. Use byacc when building the file.
9116 Thu Feb 11 20:14:28 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
9118 * Makefile.in: makeinfo binary is in a new location
9122 * config.sub: Accept -ecoff as an OS.
9124 * Makefile.in: Various changes to eliminate a level of make
9125 recursion and reduce the required command line length.
9126 (BASE_FLAGS_TO_PASS): New variable holding flags passed to all
9128 (EXTRA_HOST_FLAGS, EXTRA_TARGET_FLAGS, EXTRA_GCC_FLAGS): New
9129 variables holding settings for specific sub-makes.
9130 (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS, GCC_FLAGS_TO_PASS): Rewrote
9131 in terms of BASE_FLAGS_TO_PASS.
9132 (TARGET_LIBS): New variable listing directories which use
9133 TARGET_FLAGS_TO_PASS.
9134 (subdir_do): Eliminated.
9135 (do-*): New set of targets to replace subdir_do.
9136 (various): All targets which used subdir_do now depend on do-*.
9137 (local-clean): Renamed from do_clean.
9138 (local-distclean): New target, dependency of distclean and
9140 (install-info): Don't create directories. Depend on dir.info
9141 rather than calling make recursively.
9142 (install-dir.info): Eliminated.
9143 (install-info-dirs): Create all info directories here.
9144 (dir.info): Depend upon do-install-info.
9146 * test-build.mk (HOLES): Added false.
9150 * config.guess: Recognize BSDI and BSDJ (Jolitz 386bsd).
9152 Thu Feb 4 20:49:18 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
9154 * Makefile.in (info): remove dependency on all-texinfo. The
9155 problem was really in texinfo/C, not at this level.
9159 * Makefile.in (info): Added dependency on all-texinfo (PR 2112).
9163 * Makefile.in (make-gdb.tar.Z): Change BISON to 'bison -y' for
9168 * configure: Include srcdir in message about target of link not
9169 being found. Don't convert `-' to `_' in `with' options being
9172 Tue Feb 2 18:57:59 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
9174 * configure.in: add uudecode to host_tools
9176 * Makefile.in: added {all,install}-uudecode targets, added them to
9177 the appropriate lists
9181 * Makefile.in (all-gcc): Added dependency on all-gas.
9183 * configure.in (mips-*-*): Build ld and binutils.
9187 * configure: check return code from mkdir, print error message and
9192 * Makefile.in (make-gdb.tar.Z): New location for texinfo.tex.
9196 * test-build.mk (HOLES): Added tar, cpio and uudecode.
9200 * config.sub (h8500): Recognize this as a cpu type.
9202 Sat Jan 23 20:32:01 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
9204 * configure: source directory missing is no longer a warning
9206 * configure.in: recognize irix[34]* instead of irix[34]
9208 * Makefile.in: define and pass down X11_LIB
9212 * guess-systype: Renamed to ...
9213 * config.guess: ... by popular request.
9214 * configure.in, Makefile.in: Update accordingly.
9219 + Add Convex, Cray/Unicos, and Encore/Multimax support.
9220 + Execute ./dummy instead of assuming . is in PATH.
9224 * guess-systype: New shell script. Attempts to guess the
9225 canonical host name of the executing host.
9226 Only a few hosts are supported so far.
9227 * configure: Call guess-systype if no host is specified.
9231 * Makefile.in (gcc-no-fixedincludes): Made to work with current
9237 * Makefile.in (GCC_FLAGS_TO_PASS): New variable.
9238 (all-gcc, install-gcc, subdir_do): Use it.
9242 * Makefile.in: Rename uninstalled gcc driver from gcc to xgcc.
9246 * Makefile.in: Removed explicit setting of SUBDIRS. SUBDIRS is now
9247 set exclusively by configure, using configure.in .
9249 Wed Jan 6 13:44:11 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
9251 * test-build.mk: set $PATH for all builds
9253 * Makefile.in: pass TARGET_FLAGS_TO_PASS for xiberty and libm
9257 * Makefile.in (GCC_FOR_TARGET): Supply a default that matches
9258 the one used in gcc/Makefile.in, so that a null expansion doesn't
9259 override the one needed to build gcc with a native cc.
9264 * configure: Accept -with arguments.
9268 * Makefile.in: added h8300sim
9272 * build-all.mk: If canonhost is i386-unknown-sco3.2v4, change it
9273 to i386-sco3.2v4. Set TARGETS and CFLAGS for i386-sco3.2v4.
9274 (all-cygnus, native, build-cygnus): Make
9275 $(canonhost)-stamp-3stage-done, not $(host)....
9276 * test-build.mk (stamp-3stage-compared): Use tail +10c for
9277 i386-sco3.2v4. Added else true to if command.
9281 * config.sub: (from FSF) Sequent uses a BSD-like OS.
9285 * configure.in (i[34]86-*-isc*): added; uses mh-sysv.
9287 Thu Dec 24 17:26:24 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
9289 * configure.in: don't remove binutils from Solaris builds
9293 * Makefile.in: get rid of earlier definitions for *clean,
9294 also handle the recursive info rule better
9298 * Makefile.in (mostlyclean, distclean, realclean): Fix to
9299 do more-or-less the right thing.
9303 * Makefile.in: Add lines defining CC and CXX, and use CXX rather
9304 than gcc in definitions of CXX_FOR_BUILD and CXX_FOR_TARGET.
9306 Tue Dec 15 00:34:32 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
9308 * Makefile.in: change all $(host_cpu)-$(host_vendor)-$(host_os) to
9311 * configure.in: split the configdirs list into 4 categories (native
9312 v. cross, library v. tool) and handle the cross-only and native-
9313 only in more reasonable (and correct!) way.
9315 Mon Dec 14 17:04:22 1992 Stu Grossman (grossman at cygnus.com)
9317 * configure.in (hppa*-*-*): Don't remove bfd and gdb from
9320 Sun Dec 13 00:37:26 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
9322 * Makefile.in: extensive cleanup:: removed all of the explicit
9323 clean-* targets, collapsed many wrappers around subdir_do into
9324 one, added additional targets to satisfy standards.texi, deleted
9325 some old targets, some changes for consistency
9327 Fri Dec 11 20:18:02 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
9329 * configure.in: handle some programs as cross-only, and others as
9332 * test-build.mk: handle partial holes in a more generic manner
9334 * Makefile.in: m4 depends on libiberty
9336 Thu Dec 3 21:52:11 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
9338 * configure.in: add m4, textutils, fileutils, sed, shellutils,
9339 time, wdiff, and find to configdirs
9341 * Makefile.in: all, clean, and install rules for the new programs
9342 added to configure.in
9344 Mon Nov 30 14:54:34 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
9346 * configure.in: use mh-sun for all *-sun-* hosts
9348 Fri Nov 27 18:35:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
9350 * Makefile.in: define flags for X11 include files and library file
9351 locations, pass them down to the programs that need this info
9353 * build-all.mk: added a 'native' target, to 3stage the native toolchain
9355 Sun Nov 22 18:59:13 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
9357 * configure.in: start building libg++ for HP-UX targets
9361 * README: Update references to files moved into etc/.
9365 * config.sub (i386sol2, i486sol2): i[34]86-unknown-solaris2.
9366 * configure.in (i[34]86-*-solaris2*): Use config/mh-sysv4.
9370 * configure: accept dash as well as underscore in long option
9371 names for FSF compatibility.
9375 * config.sub: added -sco3.2v4 support from FSF.
9377 Sun Nov 8 21:14:30 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
9379 * configure.in: expand the section that adds or removes
9380 directories from the list of programs to build, to handle native
9381 vs. cross in addition to host v. native
9385 * Makefile.in: Replace C++ in macro names with CXX.
9386 This is less likely to break ...
9388 Sat Nov 7 15:16:58 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
9390 * test-build.mk: add -w to GNU_MAKE
9392 Fri Nov 6 23:10:37 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
9394 * config.sub: remove 'sparc'-->'sparc-sun' default transformation,
9395 add 'sparc' to list of recognized cpus. This needed to make
9396 'sparc-aout' expand to 'sparc-unknown-aout' instead of 'sparc-sun-aout'.
9397 Delete some redundant ose68 variants. Recognize -wrs as an os,
9398 then changes that into $CPU-wrs-vxworks.
9400 * configure.in: remove most references to gdbtest, regularize
9401 target based program removal
9403 * test-build.mk: import from p3 tree (many fixes and changes)
9407 * Makefile.in: added rules to handle tcl, tk, and expect
9409 * configure.in: handle those directories if they exist
9411 Thu Nov 5 14:35:41 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
9413 * config.sub: removed bogus hppabsd and hppahpux names, since
9414 "hppa" is not a valid cpu (hppa1.1 or hppa1.0 are, though)
9416 Thu Oct 29 00:12:41 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
9418 * Makefile.in: all-gcc now depends on all-binutils. all-libg++
9419 depends upon all-xiberty
9421 * Makefile.in: changes from p3, including:
9425 * Makefile.in (XTRAFLAGS): include newlib directories if
9426 newlib/Makefile exists, rather than if host != target.
9430 * Makefile.in: added -nostdinc to XTRAFLAGS if we are using gcc
9431 from the same source tree and not building a cross-compiler. This
9432 matters for the libg++ configuration if reconfiguring a tree that
9433 has already been installed.
9437 * Makefile.in: added -I for newlib/targ-include to XTRAFLAGS, to
9438 pick up the machine and system specific header files.
9440 * Makefile.in: added AS_FOR_TARGET, passed down in
9441 TARGET_FLAGS_TO_PASS. Added CC_FOR_BUILD, which is intended to be
9442 the C compiler to use to create programs which are run in the
9443 build environment, set it to default to $(CC), and passed it down
9444 in FLAGS_TO_PASS and TARGET_FLAGS_TO_PASS.
9448 * Makefile.in: add $(host) = $(target) tests back to *_FOR_TARGET.
9449 We need them for unusual native builds, like systems without
9452 * configure: also define $(host_canonical) and
9453 $(target_canonical), which are the full, canonical names for the
9454 given host and target
9458 * Makefile.in: Added separate definitions for C++.
9462 * configure.in (configdirs): Add deja-gnu.
9466 * README: Update for configure.texi and gdb-4.7 release.
9470 * Makefile.in: Move "all" target to top of file.
9471 Previously, first target was ".PHONY" which caused BSD4.4 make
9472 to build .PHONY when make was run without arguments.
9476 * Makefile.in: Add COPYING.LIB to GDB releases, now that there's
9477 Library-copylefted code in libiberty.
9481 * config.sub: Replace m68kmote with plain old m68k.
9485 * Makefile.in: Remove space from blank line, avoid Make complaints.
9489 * config.sub: Complain if no argument is given. Added support for
9490 386bsd as OS and target alias.
9494 * Makefile.in (XTRAFLAGS): include newlib directories if
9495 newlib/Makefile exists, rather than if host != target.
9497 Mon Oct 5 03:00:09 1992 Mark Eichin (eichin at tweedledumber.cygnus.com)
9499 * config.sub: recognize sparclite-wrs-vxworks.
9501 * Makefile.in (install-xiberty): added *-xiberty make rules (from
9502 p3.) Added clean-xiberty to clean.
9504 Thu Oct 1 17:59:19 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
9506 * configure.in: use *-*-* instead of nested cases for host and target
9510 * Makefile.in: added -nostdinc to XTRAFLAGS if we are using gcc
9511 from the same source tree and not building a cross-compiler. This
9512 matters for the libg++ configuration if reconfiguring a tree that
9513 has already been installed.
9517 * config.sub (i486v/i486v4): Merge in from FSF version.
9521 * configure: only set PWD if it is already set.
9525 * configure: just set PWD=`pwd` at the top, since Ultrix sh
9526 doesn't have unset and all success paths (and most error paths)
9527 out set it anyway. (Note: should change all uses of ${PWD=`pwd`}
9528 to just ${PWD} to avoid confusion.)
9532 * configure: always set $(tooldir) to $(libdir)/$(target_alias),
9533 even for a native compilation.
9537 Changes to make the gdb.tar.Z rule work better.
9539 * Makefile.in (GDB_SUPPORT_DIRS): Add opcodes.
9540 (DEVO_SUPPORT): Add configure.texi.
9541 (bfd-ilrt.tar.Z): Remove ancient rule.
9545 * Makefile.in: added -I for newlib/targ-include to XTRAFLAGS, to
9546 pick up the machine and system specific header files.
9548 * configure.in, config.sub: added new target m68010-adobe-scout,
9549 with alias of adobe68k. Changed configure.in to check for
9550 -scout before -sco* to avoid a false match.
9552 * Makefile.in: added AS_FOR_TARGET, passed down in
9553 TARGET_FLAGS_TO_PASS. Added CC_FOR_BUILD, which is intended to be
9554 the C compiler to use to create programs which are run in the
9555 build environment, set it to default to $(CC), and passed it down
9556 in FLAGS_TO_PASS and TARGET_FLAGS_TO_PASS.
9560 * Makefile.in: added TARGET_FLAGS_TO_PASS, CC_FOR_TARGET,
9561 AR_FOR_TARGET, RANLIB_FOR_TARGET, NM_FOR_TARGET. Pass
9562 TARGET_FLAGS_TO_PASS, which defines CC, AR, RANLIB and NM as the
9563 FOR_TARGET variants, to newlib and libg++.
9567 * Makefile.in (all-gas, all-gdb): Require all-opcodes to be built
9572 * config.sub: Accept `elf' as an environment.
9576 * Makefile.in (all-opcodes): cd into the right directory
9580 * configure: added -program_transform_name option, used as
9581 argument to sed when installing programs.
9582 configure.texi: added documentation for -program_prefix,
9583 -program_suffix and -program_transform_name.
9587 * config.sub: Accept i486 where i386 ok.
9591 * config.sub: accept we32k
9595 * config.sub, configure.in: accept OSE68000 and OSE68k.
9597 * Makefile.in: don't create all directories for ``make install'';
9598 let the subdirectories create the ones they need.
9600 Tue Aug 11 23:13:17 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
9602 * COPYING: new file, GPL v2
9604 Tue Aug 4 01:12:43 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
9606 * Makefile.in: use the new gen-info-dir, which needs a template
9607 argument (which also lives in texinfo)
9609 * configure.texi, standards.texi: fix INFO-DIR-ENTRY
9613 * config.sub (ncr3000): Change i386 to i486.
9615 Thu Jul 23 00:12:17 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
9617 * Makefile.in: add install-rcs, install-grep to
9618 install-no-fixedincludes, removed install-bison and install-libgcc
9622 * configure.in: grab the HPUX makefile fragment if on HPUX
9626 * Makefile.in: eradicate bison spoor (ditto libgcc).
9627 configure.in: recognise m68{k,000}-ericsson-OSE.
9628 es1800 is alias for m68k-ericsson-OSE
9630 Sun Jul 19 17:49:02 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
9632 * configure.in: rearrange the parts that remove programs from
9633 configdirs, based now on HOST==TARGET or by canonical triple.
9637 * test-build.mk: recurse explicitly with -f test-build.mk when
9638 appropriate. predicate stage3 and comparison on the existence
9639 of gcc. That is, if gcc isn't around, we aren't three-staging.
9640 On very clean, also remove ...stamp-co. Build in-place before
9645 * Makefile.in, configure.in: add tgas
9649 * Makefile.in: a number of changes merged in from progressive.
9651 * configure.in: add libm.
9653 * .cvsignore: ignore some stuff that comes from test-build.mk.
9657 * config.sub: Add es1800 (m68k-ericsson-es1800).
9661 * configure: Add program_suffix (parallel to program_prefix)
9662 * Makefile.in: adjust directory-creating script for losing decstation
9666 * configure: Minor $subdir-related fixes.
9670 * configure: fix various problems with propogating
9671 makefile_target_frag in subdirs.
9672 * configure.in: config libgcc if its there
9674 Fri Jun 19 15:19:40 1992 Stu Grossman (grossman at cygnus.com)
9676 * config.sub: HPPA merge.
9678 Sun Jun 14 10:29:19 1992 John Gilmore (gnu at cygnus.com)
9680 * Makefile.in: Replace all-bison with all-byacc in all
9681 dependency lines for other tools (which now use byacc).
9683 Fri Jun 12 22:21:57 1992 John Gilmore (gnu at cygnus.com)
9685 * config.sub: Add sun4sol2 => sparc-sun-solaris2.
9689 * Makefile.in: make gprof rules similar to byacc rules (instead of
9690 vestigal $(unsubdir) that didn't work...)
9694 * config.sub: Add support for Linux.
9695 * Makefile.in: Use $(FLAGS_TO_PASS) more consistently
9696 (at least for libg++).
9700 * configure.texi: fix doc for the -nfp option to configure
9704 * Makefile.in (all-binutils): ar needs flex, so depend on all-flex.
9706 Sun May 31 15:04:08 1992 Mark Eichin (eichin at cygnus.com)
9708 * config.sub: changed [^-]+ to [^-][^-]* so that it works under
9709 Sun sed. (BSD 4.3 sed doesn't handle [^-]+ either.)
9710 * configure.in: added solaris* host_makefile_frag hook.
9712 Sun May 31 01:10:34 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
9714 * config.sub: changed recognition of m68000 so that various
9715 m68k types can be specified via m680[01234]0
9717 Sat May 30 21:01:06 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
9719 * config.sub (basic_machine): fix sed so that '-foo' isn't
9720 completely substituted out while .+'-foo' loses the '-foo'
9724 * config.sub ($os): Add -aout.
9728 * configure: If host_makefile_frag is absolute, don't
9729 prefix ${invsubdir} (relevant to libg++ auto-configure).
9733 * Makefile.in (tooldir): Define it.
9734 (all-ld): Depend on all-flex.
9738 * Makefile.in (check): Fix libg++ special case.
9742 * configure: do not bury `pwd` into config.status, thus do fewer
9745 * configure: print the "Building in" message only when building in
9746 other than "." AND verbose.
9748 * configure: remove -s, rework -v to better accomodate guested
9751 * standards.texi: updated to 3 may, fixed librid <-> libdir typo.
9755 * Makefile.in: macroize flags passed on recursion. remove
9760 * configure: get makesrcdir right for subdirs deeper than 1.
9762 * Makefile.in: pass INSTALL, INSTALL_DATA, INSTALL_PROGRAM on
9767 * Makefile.in: don't print subdir_do or recursion lines.
9771 * standards.texi: added menu item.
9773 * Makefile.in: build and install standards.info.
9775 * standards.texi: new file.
9779 * configure: test for and move config.status pieces from
9784 * configure: Test for existance of files before trying to mv
9785 them, to avoid numerous non-existance messages.
9789 * configure: correct final line of config.status.
9791 * configure: patch from eggert. Avoids a protection problem if
9792 the original Makefile.in is read only.
9794 * configure: use move-if-change from gcc to create config.status.
9795 Some makefiles depend on config.status to tell if a directory
9796 has been reconfigured for a different host. This change
9797 prevents those directories from remaking everything in the case
9798 where the reconfig was only intended to rebuild a Makefile.
9800 * configure: test for config.sub with "config.sub sun4" rather
9801 than "config.sub ${host_alias}". Otherwise we can't tell a bad
9802 host alias from a missing config.sub.
9806 * Makefile.in: explicitly pass CFLAGS on recursion. no longer pass
9807 MINUS_G (this can be done with CFLAGS). Default CFLAGS to -g.
9811 * configure: mkdir ${subdir} as needed.
9815 * Makefile.in,configure.in: added autoconf.
9819 * Makefile.in: no longer pass against on recursion.
9821 * Makefile.in: added .NOEXPORT: so that stray makefile_frag
9822 definitions are not inherited.
9824 * configure: correct makesrcdir when subdir is .
9828 * configure: Add support for 'subdirs' variable, which is
9829 like 'configdirs', except that configure doesn't re-invoke
9830 itself for subdirs, it just creates a Makefile for each subdir.
9831 * configure.texi: Document subdirs.
9833 Mon Apr 13 18:50:16 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
9835 * configure.in: added flex to configdirs
9839 * Makefile.in: remove clean-stamps from clean.
9841 Sat Apr 11 03:52:03 1992 John Gilmore (gnu at cygnus.com)
9843 * configure.in: Add gdbtest to configdirs.
9847 * Makefile.in (MINUS_G): Add macro, default to -g, pass on
9849 * configure.in: Recognize new ncr3000 config.
9853 * Makefile.in, configure.in: removed references to gdbm.
9857 * config.sub: Don't canonicalize os value
9858 newsos* to bsd (readline needs to check for newsos).
9859 (This fix was earlier made Jan 31, but got re-broken.)
9861 Mon Apr 6 14:34:08 1992 Stu Grossman (grossman at cygnus.com)
9863 * configure.in: sco is an os, not a vendor!
9865 * configure: Quote $( better. Keep various shells happy.
9869 * Makefile.in: eliminate stamp-files.
9873 * Makefile.in: add send_pr. remove "force" from .stmp-gprof rule.
9874 Supress echoing of all the "if [ -d ... $(MAKE)" lines.
9878 * config.sub: fix iris/iris3.
9882 * configure: re-add -rm.
9886 * Maskefile.in: add .stmp-rcs to all.
9888 * configure.in: remove gas from rs6000 build, use aix host fragment.
9892 * configure: pass down site_option during recursion.
9894 Thu Mar 19 16:49:36 1992 Stu Grossman (grossman at cygnus.com)
9896 * Makefile.in (all.cross): Add .stmp-bfd .stmp-readline.
9900 * configure: Change exec_prefix so that it really defaults to prefix.
9904 * Makefile.in, configure.in: Add support for mmalloc library.
9908 * Makefile.in: add stmp dependencies for a few more things.
9912 * configure: adjusted error message on objdir/srcdir configure
9913 collision, per john's suggestion.
9915 * Makefile.in: add libiberty stmp to all and all.cross.
9919 * Makefile.in: remove force dependencies, add grep to all.
9923 * Makefile.in: drop flex. make stamp files work.
9925 * configure: added test for conflicting configuration in srcdir,
9926 remove trailing slashes from srcdir. Otherwise emacs gdb mode
9927 gets cranky. use relative paths for configure and srcdir
9928 whenever possible. Send some error messages to stderr that were
9933 * Makefile.in: Fix libg++ rule to check for gcc directory
9934 before using gcc/gcc. Also pass XTRAFLAGS.
9936 Thu Mar 5 21:45:07 1992 K. Richard Pixley (rich@sendai)
9938 * Makefile.in: added stmp-files so that directories aren't polled
9939 when they are already built.
9941 * configure.texi: fixed a node pointer problem.
9943 Thu Mar 5 12:05:58 1992 Stu Grossman (grossman at cygnus.com)
9945 * config.sub configure.in gdb/configure.in
9946 gdb/mips-tdep.c gdb/mipsread.c gdb/procfs.c gdb/signame.h
9947 gdb/tm-irix3.h gdb/tm-mips.h gdb/xm-irix4.h gdb/config/mt-irix3
9948 gdb/config/mh-irix4 texinfo/configure.in: Port to SGI Irix-4.x.
9952 * configure: -recurring becomes -silent. corrected help message
9955 * Makefile.in: mkdir $(exec_prefix) and $(tooldir).
9959 * configure: when building Makefile for crosses, replace
9960 tooldir and program_prefix. default srcdir from location of
9961 config.sub. remove "for host in hosts" and "for target in
9966 * Makefile.in: Do not pass bindir or mandir to cvs.
9970 * Makefile.in, configure.in: removed traces of namesubdir,
9971 -subdirs, $(subdir), $(unsubdir), some rcs triggers. Forced
9972 copyrights to '92, changed some from Cygnus to FSF.
9974 * configure.texi: remove most references to multiple hosts,
9975 multiple targets, subdirs, etc.
9977 * configure.man: removed rcsid. reference config.sub not
9980 * Makefile.in: mkdir $(infodir) on install-info.
9982 Wed Feb 19 15:41:13 1992 John Gilmore (gnu at cygnus.com)
9984 * configure.texi: Explain better about .gdbinit and about
9985 the environment that configure.in sections run in.
9987 Fri Feb 7 07:55:00 1992 John Gilmore (gnu at cygnus.com)
9989 * configure.in: Ultrix is only a decstation if it's a MIPS.
9991 Fri Jan 31 21:54:51 1992 John Gilmore (gnu at cygnus.com)
9993 * README: DOC.configure => cfg-paper.texi.
9995 Fri Jan 31 21:48:18 1992 Stu Grossman (grossman at cygnus.com)
9997 * config.sub (near case $os): Don't convert newsos* to bsd!
9999 Fri Jan 31 02:27:32 1992 John Gilmore (gnu at cygnus.com)
10001 * Makefile.in: Reinstall change from gdb-4.3 that reduces
10002 the number of copies of COPYING that go into the GDB tar file.
10004 Thu Jan 30 16:17:30 1992 Stu Grossman (grossman at cygnus.com)
10006 * bfd/configure.in, gdb/config/mh-i386sco,
10007 gdb/config/mt-i386v32, gdb/configure.in, readline/configure.in:
10008 Fix SCO configuration stuff.
10010 Tue Jan 28 23:51:07 1992 Per Bothner (bothner at cygnus.com)
10012 * Makefile.in: For libg++, make sure the -I pointing
10013 to the gcc directory goes *after* all the libg++-local -I flags.
10014 Also, move just-gcc dependency from just-libg++ to all-libg++.
10016 Tue Jan 28 12:56:24 1992 Stu Grossman (grossman at cygnus.com)
10018 * configure: Change -x to -f to keep Ultrix /bin/test happy.
10020 Sat Jan 18 17:45:11 1992 Stu Grossman (grossman at cygnus.com)
10022 * Makefile.in (make-gdb.tar.Z): Remove texinfo targets.
10024 Sat Jan 18 17:03:21 1992 Fred Fish (fnf at cygnus.com)
10026 * config.sub: Add stratus configuration frags. Also
10029 Sat Jan 18 15:35:29 1992 Stu Grossman (grossman at cygnus.com)
10031 * Makefile.in (DEV_SUPPORT): add configure.man.
10033 * config.sub(Decode manufacturer-specific): add -none*.
10035 Fri Jan 17 17:58:05 1992 Stu Grossman (grossman at cygnus.com)
10037 * Makefile.in: remove form feeds to make Sun's make happy.
10038 (DEVO_SUPPORT): DOC.configure => cfg-paper.texi.
10040 Sat Jan 4 16:11:44 1992 John Gilmore (gnu at cygnus.com)
10042 * Makefile.in (AR_FLAGS): Make quieter.
10044 Thu Jan 2 22:57:12 1992 John Gilmore (gnu at cygnus.com)
10046 * configure.in: Add libg++.
10047 * configure: When verbose, don't output the command line at each
10048 level; it will be unremarkably the same as the previous version,
10049 which will be the same as what the user typed.
10051 Fri Dec 27 16:26:47 1991 K. Richard Pixley (rich at cygnus.com)
10053 * configure.in, Makefile.in: fix clean-info, add flex. add
10056 * configure: be less sensitive to spaces in Makefile.in. Do not
10057 look for sources in "..". Doing so breaks subdirectories that
10058 might have their own configure. If a subdir has it's own
10059 configure script, use it.
10061 Thu Dec 26 16:30:26 1991 K. Richard Pixley (rich at cygnus.com)
10063 * cfg-paper.texi: some changes suggested by rms.
10065 Thu Dec 26 10:13:36 1991 Fred Fish (fnf at cygnus.com)
10067 * config.sub: Merge in some small additions from the FSF version,
10068 taken from the gcc distribution, to bring the Cygnus and FSF
10069 versions into closer sync.
10071 Fri Dec 20 11:34:18 1991 Fred Fish (fnf at cygnus.com)
10073 * configure.in: Changed svr4 references to sysv4.
10075 Thu Dec 19 15:54:29 1991 K. Richard Pixley (rich at cygnus.com)
10077 * configure: added -V for version number option.
10079 Wed Dec 18 15:39:34 1991 K. Richard Pixley (rich at cygnus.com)
10081 * DOC.configure, cfg-paper.texi: revised, updated, and texinfo'd.
10082 renamed from DOC.configure to cfg-paper.texi.
10084 Mon Dec 16 23:05:19 1991 K. Richard Pixley (rich at rtl.cygnus.com)
10086 * configure, config.subr, config.sub: config.subr is now
10089 Fri Dec 13 01:17:06 1991 K. Richard Pixley (rich at cygnus.com)
10091 * configure.texi: new file, in progress.
10093 * Makefile.in: build info file and install the man page for
10096 * configure.man: new file, first cut.
10098 * configure: find config.subr again now that configuration "none"
10099 has gone. removed all traces of the -ansi option. removed all
10100 traces of the -languages option.
10102 * config.subr: resync from rms.
10104 1991-12-11 K. Richard Pixley (rich at rtl.cygnus.com)
10106 * configure, config.sub, config.subr: merge config.sub into
10107 config.subr, call the result config.subr, remove config.sub, use
10110 * Makefile.in: revised install for dir.info.
10112 1991-12-10 K. Richard Pixley (rich at rtl.cygnus.com)
10114 * configure.in: add decstation host makefile frag.
10116 * Makefile.in: BISON now bison -y again. also install-gcc on
10117 install. clean-gdbm on clean. infodir belongs in datadir.
10118 Make directories for info install. Build dir.info here then
10121 1991-12-09 K. Richard Pixley (rich at rtl.cygnus.com)
10123 * Makefile.in: fix for bad directory tests.
10125 1991-12-07 K. Richard Pixley (rich at rtl.cygnus.com)
10127 * configure: \{1,2\} appears to be a sysv'ism. Use a different
10128 regexp. -srcdir relative was being handled incorrectly.
10130 * Makefile.in: unwrapped some for loops so that parallel makes
10131 work again and so one can focus one's attention on a particular
10134 1991-12-06 K. Richard Pixley (rich at rtl.cygnus.com)
10136 * configure: added PWD as a stand in for `pwd` (for speed). use
10137 elif wherever possible. make -srcdir work without -objdir.
10138 -objdir= commented out.
10140 1991-12-05 K. Richard Pixley (rich at rtl.cygnus.com)
10142 * configure: +options become --options. -subdirs commented out.
10143 added -host, -datadir. Renamed -destdir to -prefix. Comment in
10144 Makefile now at top of generated Makefile. Removed cvs log
10145 entries. added -srcdir. create .gdbinit only if there is one
10148 * Makefile.in: idestdir and ddestdir go away. Added copyrights
10149 and shift gpl to v2. Added ChangeLog if it didn't exist. docdir
10150 and mandir now keyed off datadir by default.
10152 1991-11-22 K. Richard Pixley (rich at rtl.cygnus.com)
10154 * Freshly created ChangeLog.
10161 version-control: never