1 /* Tracing functionality for remote targets in custom GDB protocol
3 Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
4 Free Software Foundation, Inc.
6 This file is part of GDB.
8 This program is free software; you can redistribute it and/or modify
9 it under the terms of the GNU General Public License as published by
10 the Free Software Foundation; either version 2 of the License, or
11 (at your option) any later version.
13 This program is distributed in the hope that it will be useful,
14 but WITHOUT ANY WARRANTY; without even the implied warranty of
15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 GNU General Public License for more details.
18 You should have received a copy of the GNU General Public License
19 along with this program; if not, write to the Free Software
20 Foundation, Inc., 59 Temple Place - Suite 330,
21 Boston, MA 02111-1307, USA. */
27 #include "expression.h"
32 #include "gdb_string.h"
34 #include "tracepoint.h"
38 #include "completer.h"
39 #include "gdb-events.h"
41 #include "dictionary.h"
46 /* readline include files */
47 #include "readline/readline.h"
48 #include "readline/history.h"
50 /* readline defines this. */
57 /* maximum length of an agent aexpression.
58 this accounts for the fact that packets are limited to 400 bytes
59 (which includes everything -- including the checksum), and assumes
60 the worst case of maximum length for each of the pieces of a
63 NOTE: expressions get mem2hex'ed otherwise this would be twice as
64 large. (400 - 31)/2 == 184 */
65 #define MAX_AGENT_EXPR_LEN 184
68 extern void (*deprecated_readline_begin_hook) (char *, ...);
69 extern char *(*deprecated_readline_hook) (char *);
70 extern void (*deprecated_readline_end_hook) (void);
71 extern void x_command (char *, int);
72 extern int addressprint; /* Print machine addresses? */
74 /* GDB commands implemented in other modules:
77 extern void output_command (char *, int);
82 This module defines the following debugger commands:
83 trace : set a tracepoint on a function, line, or address.
84 info trace : list all debugger-defined tracepoints.
85 delete trace : delete one or more tracepoints.
86 enable trace : enable one or more tracepoints.
87 disable trace : disable one or more tracepoints.
88 actions : specify actions to be taken at a tracepoint.
89 passcount : specify a pass count for a tracepoint.
90 tstart : start a trace experiment.
91 tstop : stop a trace experiment.
92 tstatus : query the status of a trace experiment.
93 tfind : find a trace frame in the trace buffer.
94 tdump : print everything collected at the current tracepoint.
95 save-tracepoints : write tracepoint setup into a file.
97 This module defines the following user-visible debugger variables:
98 $trace_frame : sequence number of trace frame currently being debugged.
99 $trace_line : source line of trace frame currently being debugged.
100 $trace_file : source file of trace frame currently being debugged.
101 $tracepoint : tracepoint number of trace frame currently being debugged.
105 /* ======= Important global variables: ======= */
107 /* Chain of all tracepoints defined. */
108 struct tracepoint *tracepoint_chain;
110 /* Number of last tracepoint made. */
111 static int tracepoint_count;
113 /* Number of last traceframe collected. */
114 static int traceframe_number;
116 /* Tracepoint for last traceframe collected. */
117 static int tracepoint_number;
119 /* Symbol for function for last traceframe collected */
120 static struct symbol *traceframe_fun;
122 /* Symtab and line for last traceframe collected */
123 static struct symtab_and_line traceframe_sal;
125 /* Tracing command lists */
126 static struct cmd_list_element *tfindlist;
128 /* ======= Important command functions: ======= */
129 static void trace_command (char *, int);
130 static void tracepoints_info (char *, int);
131 static void delete_trace_command (char *, int);
132 static void enable_trace_command (char *, int);
133 static void disable_trace_command (char *, int);
134 static void trace_pass_command (char *, int);
135 static void trace_actions_command (char *, int);
136 static void trace_start_command (char *, int);
137 static void trace_stop_command (char *, int);
138 static void trace_status_command (char *, int);
139 static void trace_find_command (char *, int);
140 static void trace_find_pc_command (char *, int);
141 static void trace_find_tracepoint_command (char *, int);
142 static void trace_find_line_command (char *, int);
143 static void trace_find_range_command (char *, int);
144 static void trace_find_outside_command (char *, int);
145 static void tracepoint_save_command (char *, int);
146 static void trace_dump_command (char *, int);
148 /* support routines */
149 static void trace_mention (struct tracepoint *);
151 struct collection_list;
152 static void add_aexpr (struct collection_list *, struct agent_expr *);
153 static unsigned char *mem2hex (unsigned char *, unsigned char *, int);
154 static void add_register (struct collection_list *collection,
156 static struct cleanup *make_cleanup_free_actions (struct tracepoint *t);
157 static void free_actions_list (char **actions_list);
158 static void free_actions_list_cleanup_wrapper (void *);
160 extern void _initialize_tracepoint (void);
162 /* Utility: returns true if "target remote" */
164 target_is_remote (void)
166 if (current_target.to_shortname &&
167 strcmp (current_target.to_shortname, "remote") == 0)
173 /* Utility: generate error from an incoming stub packet. */
175 trace_error (char *buf)
178 return; /* not an error msg */
181 case '1': /* malformed packet error */
182 if (*++buf == '0') /* general case: */
183 error ("tracepoint.c: error in outgoing packet.");
185 error ("tracepoint.c: error in outgoing packet at field #%ld.",
186 strtol (buf, NULL, 16));
188 error ("trace API error 0x%s.", ++buf);
190 error ("Target returns error code '%s'.", buf);
194 /* Utility: wait for reply from stub, while accepting "O" packets */
196 remote_get_noisy_reply (char *buf,
199 do /* loop on reply from remote stub */
201 QUIT; /* allow user to bail out with ^C */
202 getpkt (buf, sizeof_buf, 0);
204 error ("Target does not support this command.");
205 else if (buf[0] == 'E')
207 else if (buf[0] == 'O' &&
209 remote_console_output (buf + 1); /* 'O' message from stub */
211 return buf; /* here's the actual reply */
216 /* Set tracepoint count to NUM. */
218 set_tracepoint_count (int num)
220 tracepoint_count = num;
221 set_internalvar (lookup_internalvar ("tpnum"),
222 value_from_longest (builtin_type_int, (LONGEST) num));
225 /* Set traceframe number to NUM. */
227 set_traceframe_num (int num)
229 traceframe_number = num;
230 set_internalvar (lookup_internalvar ("trace_frame"),
231 value_from_longest (builtin_type_int, (LONGEST) num));
234 /* Set tracepoint number to NUM. */
236 set_tracepoint_num (int num)
238 tracepoint_number = num;
239 set_internalvar (lookup_internalvar ("tracepoint"),
240 value_from_longest (builtin_type_int, (LONGEST) num));
243 /* Set externally visible debug variables for querying/printing
244 the traceframe context (line, function, file) */
247 set_traceframe_context (CORE_ADDR trace_pc)
249 static struct type *func_string, *file_string;
250 static struct type *func_range, *file_range;
251 struct value *func_val;
252 struct value *file_val;
253 static struct type *charstar;
256 if (charstar == (struct type *) NULL)
257 charstar = lookup_pointer_type (builtin_type_char);
259 if (trace_pc == -1) /* cease debugging any trace buffers */
262 traceframe_sal.pc = traceframe_sal.line = 0;
263 traceframe_sal.symtab = NULL;
264 set_internalvar (lookup_internalvar ("trace_func"),
265 value_from_pointer (charstar, (LONGEST) 0));
266 set_internalvar (lookup_internalvar ("trace_file"),
267 value_from_pointer (charstar, (LONGEST) 0));
268 set_internalvar (lookup_internalvar ("trace_line"),
269 value_from_longest (builtin_type_int, (LONGEST) - 1));
273 /* save as globals for internal use */
274 traceframe_sal = find_pc_line (trace_pc, 0);
275 traceframe_fun = find_pc_function (trace_pc);
277 /* save linenumber as "$trace_line", a debugger variable visible to users */
278 set_internalvar (lookup_internalvar ("trace_line"),
279 value_from_longest (builtin_type_int,
280 (LONGEST) traceframe_sal.line));
282 /* save func name as "$trace_func", a debugger variable visible to users */
283 if (traceframe_fun == NULL ||
284 DEPRECATED_SYMBOL_NAME (traceframe_fun) == NULL)
285 set_internalvar (lookup_internalvar ("trace_func"),
286 value_from_pointer (charstar, (LONGEST) 0));
289 len = strlen (DEPRECATED_SYMBOL_NAME (traceframe_fun));
290 func_range = create_range_type (func_range,
291 builtin_type_int, 0, len - 1);
292 func_string = create_array_type (func_string,
293 builtin_type_char, func_range);
294 func_val = allocate_value (func_string);
295 VALUE_TYPE (func_val) = func_string;
296 memcpy (VALUE_CONTENTS_RAW (func_val),
297 DEPRECATED_SYMBOL_NAME (traceframe_fun),
299 func_val->modifiable = 0;
300 set_internalvar (lookup_internalvar ("trace_func"), func_val);
303 /* save file name as "$trace_file", a debugger variable visible to users */
304 if (traceframe_sal.symtab == NULL ||
305 traceframe_sal.symtab->filename == NULL)
306 set_internalvar (lookup_internalvar ("trace_file"),
307 value_from_pointer (charstar, (LONGEST) 0));
310 len = strlen (traceframe_sal.symtab->filename);
311 file_range = create_range_type (file_range,
312 builtin_type_int, 0, len - 1);
313 file_string = create_array_type (file_string,
314 builtin_type_char, file_range);
315 file_val = allocate_value (file_string);
316 VALUE_TYPE (file_val) = file_string;
317 memcpy (VALUE_CONTENTS_RAW (file_val),
318 traceframe_sal.symtab->filename,
320 file_val->modifiable = 0;
321 set_internalvar (lookup_internalvar ("trace_file"), file_val);
325 /* Low level routine to set a tracepoint.
326 Returns the tracepoint object so caller can set other things.
327 Does not set the tracepoint number!
328 Does not print anything.
330 ==> This routine should not be called if there is a chance of later
331 error(); otherwise it leaves a bogus tracepoint on the chain. Validate
332 your arguments BEFORE calling this routine! */
334 static struct tracepoint *
335 set_raw_tracepoint (struct symtab_and_line sal)
337 struct tracepoint *t, *tc;
338 struct cleanup *old_chain;
340 t = (struct tracepoint *) xmalloc (sizeof (struct tracepoint));
341 old_chain = make_cleanup (xfree, t);
342 memset (t, 0, sizeof (*t));
344 if (sal.symtab == NULL)
345 t->source_file = NULL;
347 t->source_file = savestring (sal.symtab->filename,
348 strlen (sal.symtab->filename));
350 t->section = sal.section;
351 t->language = current_language->la_language;
352 t->input_radix = input_radix;
353 t->line_number = sal.line;
358 t->addr_string = NULL;
360 /* Add this tracepoint to the end of the chain
361 so that a list of tracepoints will come out in order
362 of increasing numbers. */
364 tc = tracepoint_chain;
366 tracepoint_chain = t;
373 discard_cleanups (old_chain);
377 /* Set a tracepoint according to ARG (function, linenum or *address) */
379 trace_command (char *arg, int from_tty)
381 char **canonical = (char **) NULL;
382 struct symtabs_and_lines sals;
383 struct symtab_and_line sal;
384 struct tracepoint *t;
385 char *addr_start = 0, *addr_end = 0;
389 error ("trace command requires an argument");
391 if (from_tty && info_verbose)
392 printf_filtered ("TRACE %s\n", arg);
395 sals = decode_line_1 (&arg, 1, (struct symtab *) NULL, 0, &canonical, NULL);
398 return; /* ??? Presumably decode_line_1 has already warned? */
400 /* Resolve all line numbers to PC's */
401 for (i = 0; i < sals.nelts; i++)
402 resolve_sal_pc (&sals.sals[i]);
404 /* Now set all the tracepoints. */
405 for (i = 0; i < sals.nelts; i++)
409 t = set_raw_tracepoint (sal);
410 set_tracepoint_count (tracepoint_count + 1);
411 t->number = tracepoint_count;
413 /* If a canonical line spec is needed use that instead of the
415 if (canonical != (char **) NULL && canonical[i] != NULL)
416 t->addr_string = canonical[i];
418 t->addr_string = savestring (addr_start, addr_end - addr_start);
425 printf_filtered ("Multiple tracepoints were set.\n");
426 printf_filtered ("Use 'delete trace' to delete unwanted tracepoints.\n");
430 /* Tell the user we have just set a tracepoint TP. */
433 trace_mention (struct tracepoint *tp)
435 printf_filtered ("Tracepoint %d", tp->number);
437 if (addressprint || (tp->source_file == NULL))
439 printf_filtered (" at ");
440 print_address_numeric (tp->address, 1, gdb_stdout);
443 printf_filtered (": file %s, line %d.",
444 tp->source_file, tp->line_number);
446 printf_filtered ("\n");
449 /* Print information on tracepoint number TPNUM_EXP, or all if omitted. */
452 tracepoints_info (char *tpnum_exp, int from_tty)
454 struct tracepoint *t;
455 struct action_line *action;
456 int found_a_tracepoint = 0;
457 char wrap_indent[80];
462 tpnum = parse_and_eval_long (tpnum_exp);
465 if (tpnum == -1 || tpnum == t->number)
467 extern int addressprint; /* print machine addresses? */
469 if (!found_a_tracepoint++)
471 printf_filtered ("Num Enb ");
474 if (TARGET_ADDR_BIT <= 32)
475 printf_filtered ("Address ");
477 printf_filtered ("Address ");
479 printf_filtered ("PassC StepC What\n");
481 strcpy (wrap_indent, " ");
484 if (TARGET_ADDR_BIT <= 32)
485 strcat (wrap_indent, " ");
487 strcat (wrap_indent, " ");
490 printf_filtered ("%-3d %-3s ", t->number,
491 t->enabled_p ? "y" : "n");
496 if (TARGET_ADDR_BIT <= 32)
497 tmp = hex_string_custom (t->address & (CORE_ADDR) 0xffffffff,
500 tmp = hex_string_custom (t->address, 16);
502 printf_filtered ("%s ", tmp);
504 printf_filtered ("%-5d %-5ld ", t->pass_count, t->step_count);
508 sym = find_pc_sect_function (t->address, t->section);
511 fputs_filtered ("in ", gdb_stdout);
512 fputs_filtered (SYMBOL_PRINT_NAME (sym), gdb_stdout);
513 wrap_here (wrap_indent);
514 fputs_filtered (" at ", gdb_stdout);
516 fputs_filtered (t->source_file, gdb_stdout);
517 printf_filtered (":%d", t->line_number);
520 print_address_symbolic (t->address, gdb_stdout, demangle, " ");
522 printf_filtered ("\n");
525 printf_filtered (" Actions for tracepoint %d: \n", t->number);
526 for (action = t->actions; action; action = action->next)
528 printf_filtered ("\t%s\n", action->action);
532 if (!found_a_tracepoint)
535 printf_filtered ("No tracepoints.\n");
537 printf_filtered ("No tracepoint number %d.\n", tpnum);
541 /* Optimization: the code to parse an enable, disable, or delete TP command
542 is virtually identical except for whether it performs an enable, disable,
543 or delete. Therefore I've combined them into one function with an opcode.
545 enum tracepoint_opcode
552 /* This function implements enable, disable and delete commands. */
554 tracepoint_operation (struct tracepoint *t, int from_tty,
555 enum tracepoint_opcode opcode)
557 struct tracepoint *t2;
559 if (t == NULL) /* no tracepoint operand */
566 tracepoint_modify_event (t->number);
570 tracepoint_modify_event (t->number);
573 if (tracepoint_chain == t)
574 tracepoint_chain = t->next;
579 tracepoint_delete_event (t2->number);
585 xfree (t->addr_string);
587 xfree (t->source_file);
596 /* Utility: parse a tracepoint number and look it up in the list.
597 If MULTI_P is true, there might be a range of tracepoints in ARG.
598 if OPTIONAL_P is true, then if the argument is missing, the most
599 recent tracepoint (tracepoint_count) is returned. */
601 get_tracepoint_by_number (char **arg, int multi_p, int optional_p)
603 struct tracepoint *t;
605 char *instring = arg == NULL ? NULL : *arg;
607 if (arg == NULL || *arg == NULL || ! **arg)
610 tpnum = tracepoint_count;
612 error_no_arg ("tracepoint number");
615 tpnum = multi_p ? get_number_or_range (arg) : get_number (arg);
619 if (instring && *instring)
620 printf_filtered ("bad tracepoint number at or near '%s'\n", instring);
622 printf_filtered ("Tracepoint argument missing and no previous tracepoint\n");
627 if (t->number == tpnum)
632 /* FIXME: if we are in the middle of a range we don't want to give
633 a message. The current interface to get_number_or_range doesn't
634 allow us to discover this. */
635 printf_unfiltered ("No tracepoint number %d.\n", tpnum);
639 /* Utility: parse a list of tracepoint numbers, and call a func for each. */
641 map_args_over_tracepoints (char *args, int from_tty,
642 enum tracepoint_opcode opcode)
644 struct tracepoint *t, *tmp;
646 if (args == 0 || *args == 0) /* do them all */
647 ALL_TRACEPOINTS_SAFE (t, tmp)
648 tracepoint_operation (t, from_tty, opcode);
652 QUIT; /* give user option to bail out with ^C */
653 t = get_tracepoint_by_number (&args, 1, 0);
654 tracepoint_operation (t, from_tty, opcode);
655 while (*args == ' ' || *args == '\t')
660 /* The 'enable trace' command enables tracepoints. Not supported by all targets. */
662 enable_trace_command (char *args, int from_tty)
665 map_args_over_tracepoints (args, from_tty, enable_op);
668 /* The 'disable trace' command enables tracepoints. Not supported by all targets. */
670 disable_trace_command (char *args, int from_tty)
673 map_args_over_tracepoints (args, from_tty, disable_op);
676 /* Remove a tracepoint (or all if no argument) */
678 delete_trace_command (char *args, int from_tty)
681 if (!args || !*args) /* No args implies all tracepoints; */
682 if (from_tty) /* confirm only if from_tty... */
683 if (tracepoint_chain) /* and if there are tracepoints to delete! */
684 if (!query ("Delete all tracepoints? "))
687 map_args_over_tracepoints (args, from_tty, delete_op);
690 /* Set passcount for tracepoint.
692 First command argument is passcount, second is tracepoint number.
693 If tracepoint number omitted, apply to most recently defined.
694 Also accepts special argument "all". */
697 trace_pass_command (char *args, int from_tty)
699 struct tracepoint *t1 = (struct tracepoint *) -1, *t2;
703 if (args == 0 || *args == 0)
704 error ("passcount command requires an argument (count + optional TP num)");
706 count = strtoul (args, &args, 10); /* count comes first, then TP num */
708 while (*args && isspace ((int) *args))
711 if (*args && strncasecmp (args, "all", 3) == 0)
713 args += 3; /* skip special argument "all" */
716 error ("Junk at end of arguments.");
719 t1 = get_tracepoint_by_number (&args, 1, 1);
726 if (t1 == (struct tracepoint *) -1 || t1 == t2)
728 t2->pass_count = count;
729 tracepoint_modify_event (t2->number);
731 printf_filtered ("Setting tracepoint %d's passcount to %d\n",
735 t1 = get_tracepoint_by_number (&args, 1, 0);
741 /* ACTIONS functions: */
743 /* Prototypes for action-parsing utility commands */
744 static void read_actions (struct tracepoint *);
746 /* The three functions:
747 collect_pseudocommand,
748 while_stepping_pseudocommand, and
749 end_actions_pseudocommand
750 are placeholders for "commands" that are actually ONLY to be used
751 within a tracepoint action list. If the actual function is ever called,
752 it means that somebody issued the "command" at the top level,
753 which is always an error. */
756 end_actions_pseudocommand (char *args, int from_tty)
758 error ("This command cannot be used at the top level.");
762 while_stepping_pseudocommand (char *args, int from_tty)
764 error ("This command can only be used in a tracepoint actions list.");
768 collect_pseudocommand (char *args, int from_tty)
770 error ("This command can only be used in a tracepoint actions list.");
773 /* Enter a list of actions for a tracepoint. */
775 trace_actions_command (char *args, int from_tty)
777 struct tracepoint *t;
779 char *end_msg = "End with a line saying just \"end\".";
781 t = get_tracepoint_by_number (&args, 0, 1);
784 sprintf (tmpbuf, "Enter actions for tracepoint %d, one per line.",
789 if (deprecated_readline_begin_hook)
790 (*deprecated_readline_begin_hook) ("%s %s\n", tmpbuf, end_msg);
791 else if (input_from_terminal_p ())
792 printf_filtered ("%s\n%s\n", tmpbuf, end_msg);
796 t->step_count = 0; /* read_actions may set this */
799 if (deprecated_readline_end_hook)
800 (*deprecated_readline_end_hook) ();
801 /* tracepoints_changed () */
803 /* else just return */
806 /* worker function */
808 read_actions (struct tracepoint *t)
811 char *prompt1 = "> ", *prompt2 = " > ";
812 char *prompt = prompt1;
813 enum actionline_type linetype;
814 extern FILE *instream;
815 struct action_line *next = NULL, *temp;
816 struct cleanup *old_chain;
818 /* Control-C quits instantly if typed while in this loop
819 since it should not wait until the user types a newline. */
821 /* FIXME: kettenis/20010823: Something is wrong here. In this file
822 STOP_SIGNAL is never defined. So this code has been left out, at
823 least for quite a while now. Replacing STOP_SIGNAL with SIGTSTP
824 leads to compilation failures since the variable job_control
825 isn't declared. Leave this alone for now. */
828 signal (STOP_SIGNAL, handle_stop_sig);
830 old_chain = make_cleanup_free_actions (t);
833 /* Make sure that all output has been output. Some machines may let
834 you get away with leaving out some of the gdb_flush, but not all. */
836 gdb_flush (gdb_stdout);
837 gdb_flush (gdb_stderr);
839 if (deprecated_readline_hook && instream == NULL)
840 line = (*deprecated_readline_hook) (prompt);
841 else if (instream == stdin && ISATTY (instream))
843 line = gdb_readline_wrapper (prompt);
844 if (line && *line) /* add it to command history */
848 line = gdb_readline (0);
850 linetype = validate_actionline (&line, t);
851 if (linetype == BADLINE)
852 continue; /* already warned -- collect another line */
854 temp = xmalloc (sizeof (struct action_line));
858 if (next == NULL) /* first action for this tracepoint? */
859 t->actions = next = temp;
866 if (linetype == STEPPING) /* begin "while-stepping" */
868 if (prompt == prompt2)
870 warning ("Already processing 'while-stepping'");
874 prompt = prompt2; /* change prompt for stepping actions */
876 else if (linetype == END)
878 if (prompt == prompt2)
880 prompt = prompt1; /* end of single-stepping actions */
883 { /* end of actions */
884 if (t->actions->next == NULL)
886 /* an "end" all by itself with no other actions means
887 this tracepoint has no actions. Discard empty list. */
896 signal (STOP_SIGNAL, SIG_DFL);
899 discard_cleanups (old_chain);
902 /* worker function */
904 validate_actionline (char **line, struct tracepoint *t)
906 struct cmd_list_element *c;
907 struct expression *exp = NULL;
908 struct cleanup *old_chain = NULL;
911 /* if EOF is typed, *line is NULL */
915 for (p = *line; isspace ((int) *p);)
918 /* symbol lookup etc. */
919 if (*p == '\0') /* empty line: just prompt for another line. */
922 if (*p == '#') /* comment line */
925 c = lookup_cmd (&p, cmdlist, "", -1, 1);
928 warning ("'%s' is not an action that I know, or is ambiguous.", p);
932 if (cmd_cfunc_eq (c, collect_pseudocommand))
934 struct agent_expr *aexpr;
935 struct agent_reqs areqs;
938 { /* repeat over a comma-separated list */
939 QUIT; /* allow user to bail out with ^C */
940 while (isspace ((int) *p))
943 if (*p == '$') /* look for special pseudo-symbols */
945 if ((0 == strncasecmp ("reg", p + 1, 3)) ||
946 (0 == strncasecmp ("arg", p + 1, 3)) ||
947 (0 == strncasecmp ("loc", p + 1, 3)))
952 /* else fall thru, treat p as an expression and parse it! */
954 exp = parse_exp_1 (&p, block_for_pc (t->address), 1);
955 old_chain = make_cleanup (free_current_contents, &exp);
957 if (exp->elts[0].opcode == OP_VAR_VALUE)
959 if (SYMBOL_CLASS (exp->elts[2].symbol) == LOC_CONST)
961 warning ("constant %s (value %ld) will not be collected.",
962 DEPRECATED_SYMBOL_NAME (exp->elts[2].symbol),
963 SYMBOL_VALUE (exp->elts[2].symbol));
966 else if (SYMBOL_CLASS (exp->elts[2].symbol) == LOC_OPTIMIZED_OUT)
968 warning ("%s is optimized away and cannot be collected.",
969 DEPRECATED_SYMBOL_NAME (exp->elts[2].symbol));
974 /* we have something to collect, make sure that the expr to
975 bytecode translator can handle it and that it's not too long */
976 aexpr = gen_trace_for_expr (t->address, exp);
977 make_cleanup_free_agent_expr (aexpr);
979 if (aexpr->len > MAX_AGENT_EXPR_LEN)
980 error ("expression too complicated, try simplifying");
982 ax_reqs (aexpr, &areqs);
983 (void) make_cleanup (xfree, areqs.reg_mask);
985 if (areqs.flaw != agent_flaw_none)
986 error ("malformed expression");
988 if (areqs.min_height < 0)
989 error ("gdb: Internal error: expression has min height < 0");
991 if (areqs.max_height > 20)
992 error ("expression too complicated, try simplifying");
994 do_cleanups (old_chain);
996 while (p && *p++ == ',');
999 else if (cmd_cfunc_eq (c, while_stepping_pseudocommand))
1001 char *steparg; /* in case warning is necessary */
1003 while (isspace ((int) *p))
1008 (t->step_count = strtol (p, &p, 0)) == 0)
1010 warning ("'%s': bad step-count; command ignored.", *line);
1015 else if (cmd_cfunc_eq (c, end_actions_pseudocommand))
1019 warning ("'%s' is not a supported tracepoint action.", *line);
1024 /* worker function */
1026 free_actions (struct tracepoint *t)
1028 struct action_line *line, *next;
1030 for (line = t->actions; line; line = next)
1034 xfree (line->action);
1041 do_free_actions_cleanup (void *t)
1046 static struct cleanup *
1047 make_cleanup_free_actions (struct tracepoint *t)
1049 return make_cleanup (do_free_actions_cleanup, t);
1054 int type; /* 0 for absolute memory range, else basereg number */
1055 bfd_signed_vma start;
1059 struct collection_list
1061 unsigned char regs_mask[8]; /* room for up to 256 regs */
1064 struct memrange *list;
1065 long aexpr_listsize; /* size of array pointed to by expr_list elt */
1066 long next_aexpr_elt;
1067 struct agent_expr **aexpr_list;
1070 tracepoint_list, stepping_list;
1072 /* MEMRANGE functions: */
1074 static int memrange_cmp (const void *, const void *);
1076 /* compare memranges for qsort */
1078 memrange_cmp (const void *va, const void *vb)
1080 const struct memrange *a = va, *b = vb;
1082 if (a->type < b->type)
1084 if (a->type > b->type)
1088 if ((bfd_vma) a->start < (bfd_vma) b->start)
1090 if ((bfd_vma) a->start > (bfd_vma) b->start)
1095 if (a->start < b->start)
1097 if (a->start > b->start)
1103 /* Sort the memrange list using qsort, and merge adjacent memranges */
1105 memrange_sortmerge (struct collection_list *memranges)
1109 qsort (memranges->list, memranges->next_memrange,
1110 sizeof (struct memrange), memrange_cmp);
1111 if (memranges->next_memrange > 0)
1113 for (a = 0, b = 1; b < memranges->next_memrange; b++)
1115 if (memranges->list[a].type == memranges->list[b].type &&
1116 memranges->list[b].start - memranges->list[a].end <=
1119 /* memrange b starts before memrange a ends; merge them. */
1120 if (memranges->list[b].end > memranges->list[a].end)
1121 memranges->list[a].end = memranges->list[b].end;
1122 continue; /* next b, same a */
1126 memcpy (&memranges->list[a], &memranges->list[b],
1127 sizeof (struct memrange));
1129 memranges->next_memrange = a + 1;
1133 /* Add a register to a collection list */
1135 add_register (struct collection_list *collection, unsigned int regno)
1138 printf_filtered ("collect register %d\n", regno);
1139 if (regno > (8 * sizeof (collection->regs_mask)))
1140 error ("Internal: register number %d too large for tracepoint",
1142 collection->regs_mask[regno / 8] |= 1 << (regno % 8);
1145 /* Add a memrange to a collection list */
1147 add_memrange (struct collection_list *memranges, int type, bfd_signed_vma base,
1152 printf_filtered ("(%d,", type);
1154 printf_filtered (",%ld)\n", len);
1157 /* type: 0 == memory, n == basereg */
1158 memranges->list[memranges->next_memrange].type = type;
1159 /* base: addr if memory, offset if reg relative. */
1160 memranges->list[memranges->next_memrange].start = base;
1161 /* len: we actually save end (base + len) for convenience */
1162 memranges->list[memranges->next_memrange].end = base + len;
1163 memranges->next_memrange++;
1164 if (memranges->next_memrange >= memranges->listsize)
1166 memranges->listsize *= 2;
1167 memranges->list = xrealloc (memranges->list,
1168 memranges->listsize);
1171 if (type != -1) /* better collect the base register! */
1172 add_register (memranges, type);
1175 /* Add a symbol to a collection list */
1177 collect_symbol (struct collection_list *collect, struct symbol *sym,
1178 long frame_regno, long frame_offset)
1182 bfd_signed_vma offset;
1184 len = TYPE_LENGTH (check_typedef (SYMBOL_TYPE (sym)));
1185 switch (SYMBOL_CLASS (sym))
1188 printf_filtered ("%s: don't know symbol class %d\n",
1189 DEPRECATED_SYMBOL_NAME (sym), SYMBOL_CLASS (sym));
1192 printf_filtered ("constant %s (value %ld) will not be collected.\n",
1193 DEPRECATED_SYMBOL_NAME (sym), SYMBOL_VALUE (sym));
1196 offset = SYMBOL_VALUE_ADDRESS (sym);
1201 sprintf_vma (tmp, offset);
1202 printf_filtered ("LOC_STATIC %s: collect %ld bytes at %s.\n",
1203 DEPRECATED_SYMBOL_NAME (sym), len, tmp /* address */);
1205 add_memrange (collect, -1, offset, len); /* 0 == memory */
1209 reg = SYMBOL_VALUE (sym);
1211 printf_filtered ("LOC_REG[parm] %s: ", DEPRECATED_SYMBOL_NAME (sym));
1212 add_register (collect, reg);
1213 /* check for doubles stored in two registers */
1214 /* FIXME: how about larger types stored in 3 or more regs? */
1215 if (TYPE_CODE (SYMBOL_TYPE (sym)) == TYPE_CODE_FLT &&
1216 len > register_size (current_gdbarch, reg))
1217 add_register (collect, reg + 1);
1220 printf_filtered ("Sorry, don't know how to do LOC_REF_ARG yet.\n");
1221 printf_filtered (" (will not collect %s)\n",
1222 DEPRECATED_SYMBOL_NAME (sym));
1226 offset = frame_offset + SYMBOL_VALUE (sym);
1229 printf_filtered ("LOC_LOCAL %s: Collect %ld bytes at offset ",
1230 DEPRECATED_SYMBOL_NAME (sym), len);
1231 printf_vma (offset);
1232 printf_filtered (" from frame ptr reg %d\n", reg);
1234 add_memrange (collect, reg, offset, len);
1236 case LOC_REGPARM_ADDR:
1237 reg = SYMBOL_VALUE (sym);
1241 printf_filtered ("LOC_REGPARM_ADDR %s: Collect %ld bytes at offset ",
1242 DEPRECATED_SYMBOL_NAME (sym), len);
1243 printf_vma (offset);
1244 printf_filtered (" from reg %d\n", reg);
1246 add_memrange (collect, reg, offset, len);
1251 offset = frame_offset + SYMBOL_VALUE (sym);
1254 printf_filtered ("LOC_LOCAL %s: Collect %ld bytes at offset ",
1255 DEPRECATED_SYMBOL_NAME (sym), len);
1256 printf_vma (offset);
1257 printf_filtered (" from frame ptr reg %d\n", reg);
1259 add_memrange (collect, reg, offset, len);
1262 case LOC_BASEREG_ARG:
1263 reg = SYMBOL_BASEREG (sym);
1264 offset = SYMBOL_VALUE (sym);
1267 printf_filtered ("LOC_BASEREG %s: collect %ld bytes at offset ",
1268 DEPRECATED_SYMBOL_NAME (sym), len);
1269 printf_vma (offset);
1270 printf_filtered (" from basereg %d\n", reg);
1272 add_memrange (collect, reg, offset, len);
1274 case LOC_UNRESOLVED:
1275 printf_filtered ("Don't know LOC_UNRESOLVED %s\n", DEPRECATED_SYMBOL_NAME (sym));
1277 case LOC_OPTIMIZED_OUT:
1278 printf_filtered ("%s has been optimized out of existence.\n",
1279 DEPRECATED_SYMBOL_NAME (sym));
1284 /* Add all locals (or args) symbols to collection list */
1286 add_local_symbols (struct collection_list *collect, CORE_ADDR pc,
1287 long frame_regno, long frame_offset, int type)
1290 struct block *block;
1291 struct dict_iterator iter;
1294 block = block_for_pc (pc);
1297 QUIT; /* allow user to bail out with ^C */
1298 ALL_BLOCK_SYMBOLS (block, iter, sym)
1300 switch (SYMBOL_CLASS (sym))
1303 warning ("don't know how to trace local symbol %s",
1304 DEPRECATED_SYMBOL_NAME (sym));
1309 if (type == 'L') /* collecting Locals */
1312 collect_symbol (collect, sym, frame_regno, frame_offset);
1319 case LOC_REGPARM_ADDR:
1320 case LOC_BASEREG_ARG:
1321 if (type == 'A') /* collecting Arguments */
1324 collect_symbol (collect, sym, frame_regno, frame_offset);
1328 if (BLOCK_FUNCTION (block))
1331 block = BLOCK_SUPERBLOCK (block);
1334 warning ("No %s found in scope.", type == 'L' ? "locals" : "args");
1337 /* worker function */
1339 clear_collection_list (struct collection_list *list)
1343 list->next_memrange = 0;
1344 for (ndx = 0; ndx < list->next_aexpr_elt; ndx++)
1346 free_agent_expr (list->aexpr_list[ndx]);
1347 list->aexpr_list[ndx] = NULL;
1349 list->next_aexpr_elt = 0;
1350 memset (list->regs_mask, 0, sizeof (list->regs_mask));
1353 /* reduce a collection list to string form (for gdb protocol) */
1355 stringify_collection_list (struct collection_list *list, char *string)
1357 char temp_buf[2048];
1361 char *(*str_list)[];
1365 count = 1 + list->next_memrange + list->next_aexpr_elt + 1;
1366 str_list = (char *(*)[]) xmalloc (count * sizeof (char *));
1368 for (i = sizeof (list->regs_mask) - 1; i > 0; i--)
1369 if (list->regs_mask[i] != 0) /* skip leading zeroes in regs_mask */
1371 if (list->regs_mask[i] != 0) /* prepare to send regs_mask to the stub */
1374 printf_filtered ("\nCollecting registers (mask): 0x");
1379 QUIT; /* allow user to bail out with ^C */
1381 printf_filtered ("%02X", list->regs_mask[i]);
1382 sprintf (end, "%02X", list->regs_mask[i]);
1385 (*str_list)[ndx] = savestring (temp_buf, end - temp_buf);
1389 printf_filtered ("\n");
1390 if (list->next_memrange > 0 && info_verbose)
1391 printf_filtered ("Collecting memranges: \n");
1392 for (i = 0, count = 0, end = temp_buf; i < list->next_memrange; i++)
1394 QUIT; /* allow user to bail out with ^C */
1395 sprintf_vma (tmp2, list->list[i].start);
1398 printf_filtered ("(%d, %s, %ld)\n",
1401 (long) (list->list[i].end - list->list[i].start));
1403 if (count + 27 > MAX_AGENT_EXPR_LEN)
1405 (*str_list)[ndx] = savestring (temp_buf, count);
1411 sprintf (end, "M%X,%s,%lX",
1414 (long) (list->list[i].end - list->list[i].start));
1416 count += strlen (end);
1420 for (i = 0; i < list->next_aexpr_elt; i++)
1422 QUIT; /* allow user to bail out with ^C */
1423 if ((count + 10 + 2 * list->aexpr_list[i]->len) > MAX_AGENT_EXPR_LEN)
1425 (*str_list)[ndx] = savestring (temp_buf, count);
1430 sprintf (end, "X%08X,", list->aexpr_list[i]->len);
1431 end += 10; /* 'X' + 8 hex digits + ',' */
1434 end = mem2hex (list->aexpr_list[i]->buf, end, list->aexpr_list[i]->len);
1435 count += 2 * list->aexpr_list[i]->len;
1440 (*str_list)[ndx] = savestring (temp_buf, count);
1445 (*str_list)[ndx] = NULL;
1454 free_actions_list_cleanup_wrapper (void *al)
1456 free_actions_list (al);
1460 free_actions_list (char **actions_list)
1464 if (actions_list == 0)
1467 for (ndx = 0; actions_list[ndx]; ndx++)
1468 xfree (actions_list[ndx]);
1470 xfree (actions_list);
1473 /* render all actions into gdb protocol */
1475 encode_actions (struct tracepoint *t, char ***tdp_actions,
1476 char ***stepping_actions)
1478 static char tdp_buff[2048], step_buff[2048];
1480 struct expression *exp = NULL;
1481 struct action_line *action;
1483 struct value *tempval;
1484 struct collection_list *collect;
1485 struct cmd_list_element *cmd;
1486 struct agent_expr *aexpr;
1488 LONGEST frame_offset;
1491 clear_collection_list (&tracepoint_list);
1492 clear_collection_list (&stepping_list);
1493 collect = &tracepoint_list;
1495 *tdp_actions = NULL;
1496 *stepping_actions = NULL;
1498 TARGET_VIRTUAL_FRAME_POINTER (t->address, &frame_reg, &frame_offset);
1500 for (action = t->actions; action; action = action->next)
1502 QUIT; /* allow user to bail out with ^C */
1503 action_exp = action->action;
1504 while (isspace ((int) *action_exp))
1507 if (*action_exp == '#') /* comment line */
1510 cmd = lookup_cmd (&action_exp, cmdlist, "", -1, 1);
1512 error ("Bad action list item: %s", action_exp);
1514 if (cmd_cfunc_eq (cmd, collect_pseudocommand))
1517 { /* repeat over a comma-separated list */
1518 QUIT; /* allow user to bail out with ^C */
1519 while (isspace ((int) *action_exp))
1522 if (0 == strncasecmp ("$reg", action_exp, 4))
1524 for (i = 0; i < NUM_REGS; i++)
1525 add_register (collect, i);
1526 action_exp = strchr (action_exp, ','); /* more? */
1528 else if (0 == strncasecmp ("$arg", action_exp, 4))
1530 add_local_symbols (collect,
1535 action_exp = strchr (action_exp, ','); /* more? */
1537 else if (0 == strncasecmp ("$loc", action_exp, 4))
1539 add_local_symbols (collect,
1544 action_exp = strchr (action_exp, ','); /* more? */
1548 unsigned long addr, len;
1549 struct cleanup *old_chain = NULL;
1550 struct cleanup *old_chain1 = NULL;
1551 struct agent_reqs areqs;
1553 exp = parse_exp_1 (&action_exp,
1554 block_for_pc (t->address), 1);
1555 old_chain = make_cleanup (free_current_contents, &exp);
1557 switch (exp->elts[0].opcode)
1560 i = exp->elts[1].longconst;
1562 printf_filtered ("OP_REGISTER: ");
1563 add_register (collect, i);
1567 /* safe because we know it's a simple expression */
1568 tempval = evaluate_expression (exp);
1569 addr = VALUE_ADDRESS (tempval) + VALUE_OFFSET (tempval);
1570 len = TYPE_LENGTH (check_typedef (exp->elts[1].type));
1571 add_memrange (collect, -1, addr, len);
1575 collect_symbol (collect,
1576 exp->elts[2].symbol,
1581 default: /* full-fledged expression */
1582 aexpr = gen_trace_for_expr (t->address, exp);
1584 old_chain1 = make_cleanup_free_agent_expr (aexpr);
1586 ax_reqs (aexpr, &areqs);
1587 if (areqs.flaw != agent_flaw_none)
1588 error ("malformed expression");
1590 if (areqs.min_height < 0)
1591 error ("gdb: Internal error: expression has min height < 0");
1592 if (areqs.max_height > 20)
1593 error ("expression too complicated, try simplifying");
1595 discard_cleanups (old_chain1);
1596 add_aexpr (collect, aexpr);
1598 /* take care of the registers */
1599 if (areqs.reg_mask_len > 0)
1604 for (ndx1 = 0; ndx1 < areqs.reg_mask_len; ndx1++)
1606 QUIT; /* allow user to bail out with ^C */
1607 if (areqs.reg_mask[ndx1] != 0)
1609 /* assume chars have 8 bits */
1610 for (ndx2 = 0; ndx2 < 8; ndx2++)
1611 if (areqs.reg_mask[ndx1] & (1 << ndx2))
1612 /* it's used -- record it */
1613 add_register (collect, ndx1 * 8 + ndx2);
1619 do_cleanups (old_chain);
1622 while (action_exp && *action_exp++ == ',');
1624 else if (cmd_cfunc_eq (cmd, while_stepping_pseudocommand))
1626 collect = &stepping_list;
1628 else if (cmd_cfunc_eq (cmd, end_actions_pseudocommand))
1630 if (collect == &stepping_list) /* end stepping actions */
1631 collect = &tracepoint_list;
1633 break; /* end tracepoint actions */
1636 memrange_sortmerge (&tracepoint_list);
1637 memrange_sortmerge (&stepping_list);
1639 *tdp_actions = stringify_collection_list (&tracepoint_list, tdp_buff);
1640 *stepping_actions = stringify_collection_list (&stepping_list, step_buff);
1644 add_aexpr (struct collection_list *collect, struct agent_expr *aexpr)
1646 if (collect->next_aexpr_elt >= collect->aexpr_listsize)
1648 collect->aexpr_list =
1649 xrealloc (collect->aexpr_list,
1650 2 * collect->aexpr_listsize * sizeof (struct agent_expr *));
1651 collect->aexpr_listsize *= 2;
1653 collect->aexpr_list[collect->next_aexpr_elt] = aexpr;
1654 collect->next_aexpr_elt++;
1657 static char target_buf[2048];
1659 /* Set "transparent" memory ranges
1661 Allow trace mechanism to treat text-like sections
1662 (and perhaps all read-only sections) transparently,
1663 i.e. don't reject memory requests from these address ranges
1664 just because they haven't been collected. */
1667 remote_set_transparent_ranges (void)
1669 extern bfd *exec_bfd;
1676 return; /* no information to give. */
1678 strcpy (target_buf, "QTro");
1679 for (s = exec_bfd->sections; s; s = s->next)
1681 char tmp1[40], tmp2[40];
1683 if ((s->flags & SEC_LOAD) == 0 ||
1684 /* (s->flags & SEC_CODE) == 0 || */
1685 (s->flags & SEC_READONLY) == 0)
1690 size = bfd_get_section_size (s);
1691 sprintf_vma (tmp1, lma);
1692 sprintf_vma (tmp2, lma + size);
1693 sprintf (target_buf + strlen (target_buf),
1694 ":%s,%s", tmp1, tmp2);
1698 putpkt (target_buf);
1699 getpkt (target_buf, sizeof (target_buf), 0);
1705 Tell target to clear any previous trace experiment.
1706 Walk the list of tracepoints, and send them (and their actions)
1707 to the target. If no errors,
1708 Tell target to start a new trace experiment. */
1711 trace_start_command (char *args, int from_tty)
1712 { /* STUB_COMM MOSTLY_IMPLEMENTED */
1713 struct tracepoint *t;
1716 char **stepping_actions;
1718 struct cleanup *old_chain = NULL;
1720 dont_repeat (); /* like "run", dangerous to repeat accidentally */
1722 if (target_is_remote ())
1725 remote_get_noisy_reply (target_buf, sizeof (target_buf));
1726 if (strcmp (target_buf, "OK"))
1727 error ("Target does not support this command.");
1733 sprintf_vma (tmp, t->address);
1734 sprintf (buf, "QTDP:%x:%s:%c:%lx:%x", t->number, tmp, /* address */
1735 t->enabled_p ? 'E' : 'D',
1736 t->step_count, t->pass_count);
1741 remote_get_noisy_reply (target_buf, sizeof (target_buf));
1742 if (strcmp (target_buf, "OK"))
1743 error ("Target does not support tracepoints.");
1747 encode_actions (t, &tdp_actions, &stepping_actions);
1748 old_chain = make_cleanup (free_actions_list_cleanup_wrapper,
1750 (void) make_cleanup (free_actions_list_cleanup_wrapper,
1753 /* do_single_steps (t); */
1756 for (ndx = 0; tdp_actions[ndx]; ndx++)
1758 QUIT; /* allow user to bail out with ^C */
1759 sprintf (buf, "QTDP:-%x:%s:%s%c",
1760 t->number, tmp, /* address */
1762 ((tdp_actions[ndx + 1] || stepping_actions)
1765 remote_get_noisy_reply (target_buf, sizeof (target_buf));
1766 if (strcmp (target_buf, "OK"))
1767 error ("Error on target while setting tracepoints.");
1770 if (stepping_actions)
1772 for (ndx = 0; stepping_actions[ndx]; ndx++)
1774 QUIT; /* allow user to bail out with ^C */
1775 sprintf (buf, "QTDP:-%x:%s:%s%s%s",
1776 t->number, tmp, /* address */
1777 ((ndx == 0) ? "S" : ""),
1778 stepping_actions[ndx],
1779 (stepping_actions[ndx + 1] ? "-" : ""));
1781 remote_get_noisy_reply (target_buf, sizeof (target_buf));
1782 if (strcmp (target_buf, "OK"))
1783 error ("Error on target while setting tracepoints.");
1787 do_cleanups (old_chain);
1790 /* Tell target to treat text-like sections as transparent */
1791 remote_set_transparent_ranges ();
1792 /* Now insert traps and begin collecting data */
1794 remote_get_noisy_reply (target_buf, sizeof (target_buf));
1795 if (strcmp (target_buf, "OK"))
1796 error ("Bogus reply from target: %s", target_buf);
1797 set_traceframe_num (-1); /* all old traceframes invalidated */
1798 set_tracepoint_num (-1);
1799 set_traceframe_context (-1);
1800 trace_running_p = 1;
1801 if (deprecated_trace_start_stop_hook)
1802 deprecated_trace_start_stop_hook (1, from_tty);
1806 error ("Trace can only be run on remote targets.");
1811 trace_stop_command (char *args, int from_tty)
1812 { /* STUB_COMM IS_IMPLEMENTED */
1813 if (target_is_remote ())
1816 remote_get_noisy_reply (target_buf, sizeof (target_buf));
1817 if (strcmp (target_buf, "OK"))
1818 error ("Bogus reply from target: %s", target_buf);
1819 trace_running_p = 0;
1820 if (deprecated_trace_start_stop_hook)
1821 deprecated_trace_start_stop_hook (0, from_tty);
1824 error ("Trace can only be run on remote targets.");
1827 unsigned long trace_running_p;
1829 /* tstatus command */
1831 trace_status_command (char *args, int from_tty)
1832 { /* STUB_COMM IS_IMPLEMENTED */
1833 if (target_is_remote ())
1835 putpkt ("qTStatus");
1836 remote_get_noisy_reply (target_buf, sizeof (target_buf));
1838 if (target_buf[0] != 'T' ||
1839 (target_buf[1] != '0' && target_buf[1] != '1'))
1840 error ("Bogus reply from target: %s", target_buf);
1842 /* exported for use by the GUI */
1843 trace_running_p = (target_buf[1] == '1');
1846 error ("Trace can only be run on remote targets.");
1849 /* Worker function for the various flavors of the tfind command */
1851 finish_tfind_command (char *msg,
1855 int target_frameno = -1, target_tracept = -1;
1856 CORE_ADDR old_frame_addr;
1857 struct symbol *old_func;
1860 old_frame_addr = get_frame_base (get_current_frame ());
1861 old_func = find_pc_function (read_pc ());
1864 reply = remote_get_noisy_reply (msg, sizeof_msg);
1866 while (reply && *reply)
1870 if ((target_frameno = (int) strtol (++reply, &reply, 16)) == -1)
1872 /* A request for a non-existant trace frame has failed.
1873 Our response will be different, depending on FROM_TTY:
1875 If FROM_TTY is true, meaning that this command was
1876 typed interactively by the user, then give an error
1877 and DO NOT change the state of traceframe_number etc.
1879 However if FROM_TTY is false, meaning that we're either
1880 in a script, a loop, or a user-defined command, then
1881 DON'T give an error, but DO change the state of
1882 traceframe_number etc. to invalid.
1884 The rationalle is that if you typed the command, you
1885 might just have committed a typo or something, and you'd
1886 like to NOT lose your current debugging state. However
1887 if you're in a user-defined command or especially in a
1888 loop, then you need a way to detect that the command
1889 failed WITHOUT aborting. This allows you to write
1890 scripts that search thru the trace buffer until the end,
1891 and then continue on to do something else. */
1894 error ("Target failed to find requested trace frame.");
1898 printf_filtered ("End of trace buffer.\n");
1899 /* The following will not recurse, since it's special-cased */
1900 trace_find_command ("-1", from_tty);
1901 reply = NULL; /* break out of loop,
1902 (avoid recursive nonsense) */
1907 if ((target_tracept = (int) strtol (++reply, &reply, 16)) == -1)
1908 error ("Target failed to find requested trace frame.");
1910 case 'O': /* "OK"? */
1911 if (reply[1] == 'K' && reply[2] == '\0')
1914 error ("Bogus reply from target: %s", reply);
1917 error ("Bogus reply from target: %s", reply);
1920 flush_cached_frames ();
1921 registers_changed ();
1922 select_frame (get_current_frame ());
1923 set_traceframe_num (target_frameno);
1924 set_tracepoint_num (target_tracept);
1925 if (target_frameno == -1)
1926 set_traceframe_context (-1);
1928 set_traceframe_context (read_pc ());
1932 enum print_what print_what;
1934 /* NOTE: in immitation of the step command, try to determine
1935 whether we have made a transition from one function to another.
1936 If so, we'll print the "stack frame" (ie. the new function and
1937 it's arguments) -- otherwise we'll just show the new source line.
1939 This determination is made by checking (1) whether the current
1940 function has changed, and (2) whether the current FP has changed.
1941 Hack: if the FP wasn't collected, either at the current or the
1942 previous frame, assume that the FP has NOT changed. */
1944 if (old_func == find_pc_function (read_pc ()) &&
1945 (old_frame_addr == 0 ||
1946 get_frame_base (get_current_frame ()) == 0 ||
1947 old_frame_addr == get_frame_base (get_current_frame ())))
1948 print_what = SRC_LINE;
1950 print_what = SRC_AND_LOC;
1952 print_stack_frame (get_selected_frame (NULL), 1, print_what);
1957 /* trace_find_command takes a trace frame number n,
1958 sends "QTFrame:<n>" to the target,
1959 and accepts a reply that may contain several optional pieces
1960 of information: a frame number, a tracepoint number, and an
1961 indication of whether this is a trap frame or a stepping frame.
1963 The minimal response is just "OK" (which indicates that the
1964 target does not give us a frame number or a tracepoint number).
1965 Instead of that, the target may send us a string containing
1967 F<hexnum> (gives the selected frame number)
1968 T<hexnum> (gives the selected tracepoint number)
1973 trace_find_command (char *args, int from_tty)
1974 { /* STUB_COMM PART_IMPLEMENTED */
1975 /* this should only be called with a numeric argument */
1978 if (target_is_remote ())
1980 if (deprecated_trace_find_hook)
1981 deprecated_trace_find_hook (args, from_tty);
1983 if (args == 0 || *args == 0)
1984 { /* TFIND with no args means find NEXT trace frame. */
1985 if (traceframe_number == -1)
1986 frameno = 0; /* "next" is first one */
1988 frameno = traceframe_number + 1;
1990 else if (0 == strcmp (args, "-"))
1992 if (traceframe_number == -1)
1993 error ("not debugging trace buffer");
1994 else if (from_tty && traceframe_number == 0)
1995 error ("already at start of trace buffer");
1997 frameno = traceframe_number - 1;
2000 frameno = parse_and_eval_long (args);
2003 error ("invalid input (%d is less than zero)", frameno);
2005 sprintf (target_buf, "QTFrame:%x", frameno);
2006 finish_tfind_command (target_buf, sizeof (target_buf), from_tty);
2009 error ("Trace can only be run on remote targets.");
2014 trace_find_end_command (char *args, int from_tty)
2016 trace_find_command ("-1", from_tty);
2021 trace_find_none_command (char *args, int from_tty)
2023 trace_find_command ("-1", from_tty);
2028 trace_find_start_command (char *args, int from_tty)
2030 trace_find_command ("0", from_tty);
2033 /* tfind pc command */
2035 trace_find_pc_command (char *args, int from_tty)
2036 { /* STUB_COMM PART_IMPLEMENTED */
2040 if (target_is_remote ())
2042 if (args == 0 || *args == 0)
2043 pc = read_pc (); /* default is current pc */
2045 pc = parse_and_eval_address (args);
2047 sprintf_vma (tmp, pc);
2048 sprintf (target_buf, "QTFrame:pc:%s", tmp);
2049 finish_tfind_command (target_buf, sizeof (target_buf), from_tty);
2052 error ("Trace can only be run on remote targets.");
2055 /* tfind tracepoint command */
2057 trace_find_tracepoint_command (char *args, int from_tty)
2058 { /* STUB_COMM PART_IMPLEMENTED */
2061 if (target_is_remote ())
2063 if (args == 0 || *args == 0)
2065 if (tracepoint_number == -1)
2066 error ("No current tracepoint -- please supply an argument.");
2068 tdp = tracepoint_number; /* default is current TDP */
2071 tdp = parse_and_eval_long (args);
2073 sprintf (target_buf, "QTFrame:tdp:%x", tdp);
2074 finish_tfind_command (target_buf, sizeof (target_buf), from_tty);
2077 error ("Trace can only be run on remote targets.");
2080 /* TFIND LINE command:
2082 This command will take a sourceline for argument, just like BREAK
2083 or TRACE (ie. anything that "decode_line_1" can handle).
2085 With no argument, this command will find the next trace frame
2086 corresponding to a source line OTHER THAN THE CURRENT ONE. */
2089 trace_find_line_command (char *args, int from_tty)
2090 { /* STUB_COMM PART_IMPLEMENTED */
2091 static CORE_ADDR start_pc, end_pc;
2092 struct symtabs_and_lines sals;
2093 struct symtab_and_line sal;
2094 struct cleanup *old_chain;
2095 char startpc_str[40], endpc_str[40];
2097 if (target_is_remote ())
2099 if (args == 0 || *args == 0)
2101 sal = find_pc_line (get_frame_pc (get_current_frame ()), 0);
2103 sals.sals = (struct symtab_and_line *)
2104 xmalloc (sizeof (struct symtab_and_line));
2109 sals = decode_line_spec (args, 1);
2113 old_chain = make_cleanup (xfree, sals.sals);
2114 if (sal.symtab == 0)
2116 printf_filtered ("TFIND: No line number information available");
2119 /* This is useful for "info line *0x7f34". If we can't tell the
2120 user about a source line, at least let them have the symbolic
2122 printf_filtered (" for address ");
2124 print_address (sal.pc, gdb_stdout);
2125 printf_filtered (";\n -- will attempt to find by PC. \n");
2129 printf_filtered (".\n");
2130 return; /* no line, no PC; what can we do? */
2133 else if (sal.line > 0
2134 && find_line_pc_range (sal, &start_pc, &end_pc))
2136 if (start_pc == end_pc)
2138 printf_filtered ("Line %d of \"%s\"",
2139 sal.line, sal.symtab->filename);
2141 printf_filtered (" is at address ");
2142 print_address (start_pc, gdb_stdout);
2144 printf_filtered (" but contains no code.\n");
2145 sal = find_pc_line (start_pc, 0);
2147 find_line_pc_range (sal, &start_pc, &end_pc) &&
2149 printf_filtered ("Attempting to find line %d instead.\n",
2152 error ("Cannot find a good line.");
2156 /* Is there any case in which we get here, and have an address
2157 which the user would want to see? If we have debugging symbols
2158 and no line numbers? */
2159 error ("Line number %d is out of range for \"%s\".\n",
2160 sal.line, sal.symtab->filename);
2162 sprintf_vma (startpc_str, start_pc);
2163 sprintf_vma (endpc_str, end_pc - 1);
2164 if (args && *args) /* find within range of stated line */
2165 sprintf (target_buf, "QTFrame:range:%s:%s", startpc_str, endpc_str);
2166 else /* find OUTSIDE OF range of CURRENT line */
2167 sprintf (target_buf, "QTFrame:outside:%s:%s", startpc_str, endpc_str);
2168 finish_tfind_command (target_buf, sizeof (target_buf), from_tty);
2169 do_cleanups (old_chain);
2172 error ("Trace can only be run on remote targets.");
2175 /* tfind range command */
2177 trace_find_range_command (char *args, int from_tty)
2179 static CORE_ADDR start, stop;
2180 char start_str[40], stop_str[40];
2183 if (target_is_remote ())
2185 if (args == 0 || *args == 0)
2186 { /* XXX FIXME: what should default behavior be? */
2187 printf_filtered ("Usage: tfind range <startaddr>,<endaddr>\n");
2191 if (0 != (tmp = strchr (args, ',')))
2193 *tmp++ = '\0'; /* terminate start address */
2194 while (isspace ((int) *tmp))
2196 start = parse_and_eval_address (args);
2197 stop = parse_and_eval_address (tmp);
2200 { /* no explicit end address? */
2201 start = parse_and_eval_address (args);
2202 stop = start + 1; /* ??? */
2205 sprintf_vma (start_str, start);
2206 sprintf_vma (stop_str, stop);
2207 sprintf (target_buf, "QTFrame:range:%s:%s", start_str, stop_str);
2208 finish_tfind_command (target_buf, sizeof (target_buf), from_tty);
2211 error ("Trace can only be run on remote targets.");
2214 /* tfind outside command */
2216 trace_find_outside_command (char *args, int from_tty)
2218 CORE_ADDR start, stop;
2219 char start_str[40], stop_str[40];
2222 if (target_is_remote ())
2224 if (args == 0 || *args == 0)
2225 { /* XXX FIXME: what should default behavior be? */
2226 printf_filtered ("Usage: tfind outside <startaddr>,<endaddr>\n");
2230 if (0 != (tmp = strchr (args, ',')))
2232 *tmp++ = '\0'; /* terminate start address */
2233 while (isspace ((int) *tmp))
2235 start = parse_and_eval_address (args);
2236 stop = parse_and_eval_address (tmp);
2239 { /* no explicit end address? */
2240 start = parse_and_eval_address (args);
2241 stop = start + 1; /* ??? */
2244 sprintf_vma (start_str, start);
2245 sprintf_vma (stop_str, stop);
2246 sprintf (target_buf, "QTFrame:outside:%s:%s", start_str, stop_str);
2247 finish_tfind_command (target_buf, sizeof (target_buf), from_tty);
2250 error ("Trace can only be run on remote targets.");
2253 /* save-tracepoints command */
2255 tracepoint_save_command (char *args, int from_tty)
2257 struct tracepoint *tp;
2258 struct action_line *line;
2260 char *i1 = " ", *i2 = " ";
2261 char *indent, *actionline, *pathname;
2264 if (args == 0 || *args == 0)
2265 error ("Argument required (file name in which to save tracepoints");
2267 if (tracepoint_chain == 0)
2269 warning ("save-tracepoints: no tracepoints to save.\n");
2273 pathname = tilde_expand (args);
2274 if (!(fp = fopen (pathname, "w")))
2275 error ("Unable to open file '%s' for saving tracepoints (%s)",
2276 args, safe_strerror (errno));
2279 ALL_TRACEPOINTS (tp)
2281 if (tp->addr_string)
2282 fprintf (fp, "trace %s\n", tp->addr_string);
2285 sprintf_vma (tmp, tp->address);
2286 fprintf (fp, "trace *0x%s\n", tmp);
2290 fprintf (fp, " passcount %d\n", tp->pass_count);
2294 fprintf (fp, " actions\n");
2296 for (line = tp->actions; line; line = line->next)
2298 struct cmd_list_element *cmd;
2300 QUIT; /* allow user to bail out with ^C */
2301 actionline = line->action;
2302 while (isspace ((int) *actionline))
2305 fprintf (fp, "%s%s\n", indent, actionline);
2306 if (*actionline != '#') /* skip for comment lines */
2308 cmd = lookup_cmd (&actionline, cmdlist, "", -1, 1);
2310 error ("Bad action list item: %s", actionline);
2311 if (cmd_cfunc_eq (cmd, while_stepping_pseudocommand))
2313 else if (cmd_cfunc_eq (cmd, end_actions_pseudocommand))
2321 printf_filtered ("Tracepoints saved to file '%s'.\n", args);
2325 /* info scope command: list the locals for a scope. */
2327 scope_info (char *args, int from_tty)
2329 struct symtabs_and_lines sals;
2331 struct minimal_symbol *msym;
2332 struct block *block;
2333 char **canonical, *symname, *save_args = args;
2334 struct dict_iterator iter;
2337 if (args == 0 || *args == 0)
2338 error ("requires an argument (function, line or *addr) to define a scope");
2340 sals = decode_line_1 (&args, 1, NULL, 0, &canonical, NULL);
2341 if (sals.nelts == 0)
2342 return; /* presumably decode_line_1 has already warned */
2344 /* Resolve line numbers to PC */
2345 resolve_sal_pc (&sals.sals[0]);
2346 block = block_for_pc (sals.sals[0].pc);
2350 QUIT; /* allow user to bail out with ^C */
2351 ALL_BLOCK_SYMBOLS (block, iter, sym)
2353 QUIT; /* allow user to bail out with ^C */
2355 printf_filtered ("Scope for %s:\n", save_args);
2358 symname = DEPRECATED_SYMBOL_NAME (sym);
2359 if (symname == NULL || *symname == '\0')
2360 continue; /* probably botched, certainly useless */
2362 printf_filtered ("Symbol %s is ", symname);
2363 switch (SYMBOL_CLASS (sym))
2366 case LOC_UNDEF: /* messed up symbol? */
2367 printf_filtered ("a bogus symbol, class %d.\n",
2368 SYMBOL_CLASS (sym));
2369 count--; /* don't count this one */
2372 printf_filtered ("a constant with value %ld (0x%lx)",
2373 SYMBOL_VALUE (sym), SYMBOL_VALUE (sym));
2375 case LOC_CONST_BYTES:
2376 printf_filtered ("constant bytes: ");
2377 if (SYMBOL_TYPE (sym))
2378 for (j = 0; j < TYPE_LENGTH (SYMBOL_TYPE (sym)); j++)
2379 fprintf_filtered (gdb_stdout, " %02x",
2380 (unsigned) SYMBOL_VALUE_BYTES (sym)[j]);
2383 printf_filtered ("in static storage at address ");
2384 print_address_numeric (SYMBOL_VALUE_ADDRESS (sym),
2388 printf_filtered ("a local variable in register $%s",
2389 REGISTER_NAME (SYMBOL_VALUE (sym)));
2393 printf_filtered ("an argument at stack/frame offset %ld",
2394 SYMBOL_VALUE (sym));
2397 printf_filtered ("a local variable at frame offset %ld",
2398 SYMBOL_VALUE (sym));
2401 printf_filtered ("a reference argument at offset %ld",
2402 SYMBOL_VALUE (sym));
2405 printf_filtered ("an argument in register $%s",
2406 REGISTER_NAME (SYMBOL_VALUE (sym)));
2408 case LOC_REGPARM_ADDR:
2409 printf_filtered ("the address of an argument, in register $%s",
2410 REGISTER_NAME (SYMBOL_VALUE (sym)));
2413 printf_filtered ("a typedef.\n");
2416 printf_filtered ("a label at address ");
2417 print_address_numeric (SYMBOL_VALUE_ADDRESS (sym),
2421 printf_filtered ("a function at address ");
2422 print_address_numeric (BLOCK_START (SYMBOL_BLOCK_VALUE (sym)),
2426 printf_filtered ("a variable at offset %ld from register $%s",
2428 REGISTER_NAME (SYMBOL_BASEREG (sym)));
2430 case LOC_BASEREG_ARG:
2431 printf_filtered ("an argument at offset %ld from register $%s",
2433 REGISTER_NAME (SYMBOL_BASEREG (sym)));
2435 case LOC_UNRESOLVED:
2436 msym = lookup_minimal_symbol (DEPRECATED_SYMBOL_NAME (sym),
2439 printf_filtered ("Unresolved Static");
2442 printf_filtered ("static storage at address ");
2443 print_address_numeric (SYMBOL_VALUE_ADDRESS (msym), 1,
2447 case LOC_OPTIMIZED_OUT:
2448 printf_filtered ("optimized out.\n");
2450 case LOC_HP_THREAD_LOCAL_STATIC:
2451 printf_filtered ("HP thread local static ");
2454 printf_filtered ("extern (local indirect) at address ");
2455 print_address_numeric (SYMBOL_VALUE_ADDRESS (sym),
2459 case LOC_COMPUTED_ARG:
2460 SYMBOL_OPS (sym)->describe_location (sym, gdb_stdout);
2463 if (SYMBOL_TYPE (sym))
2464 printf_filtered (", length %d.\n",
2465 TYPE_LENGTH (check_typedef (SYMBOL_TYPE (sym))));
2467 if (BLOCK_FUNCTION (block))
2470 block = BLOCK_SUPERBLOCK (block);
2473 printf_filtered ("Scope for %s contains no locals or arguments.\n",
2477 /* worker function (cleanup) */
2479 replace_comma (void *data)
2487 trace_dump_command (char *args, int from_tty)
2489 struct tracepoint *t;
2490 struct action_line *action;
2491 char *action_exp, *next_comma;
2492 struct cleanup *old_cleanups;
2493 int stepping_actions = 0;
2494 int stepping_frame = 0;
2496 if (!target_is_remote ())
2498 error ("Trace can only be run on remote targets.");
2502 if (tracepoint_number == -1)
2504 warning ("No current trace frame.");
2509 if (t->number == tracepoint_number)
2513 error ("No known tracepoint matches 'current' tracepoint #%d.",
2516 old_cleanups = make_cleanup (null_cleanup, NULL);
2518 printf_filtered ("Data collected at tracepoint %d, trace frame %d:\n",
2519 tracepoint_number, traceframe_number);
2521 /* The current frame is a trap frame if the frame PC is equal
2522 to the tracepoint PC. If not, then the current frame was
2523 collected during single-stepping. */
2525 stepping_frame = (t->address != (read_pc () - DECR_PC_AFTER_BREAK));
2527 for (action = t->actions; action; action = action->next)
2529 struct cmd_list_element *cmd;
2531 QUIT; /* allow user to bail out with ^C */
2532 action_exp = action->action;
2533 while (isspace ((int) *action_exp))
2536 /* The collection actions to be done while stepping are
2537 bracketed by the commands "while-stepping" and "end". */
2539 if (*action_exp == '#') /* comment line */
2542 cmd = lookup_cmd (&action_exp, cmdlist, "", -1, 1);
2544 error ("Bad action list item: %s", action_exp);
2546 if (cmd_cfunc_eq (cmd, while_stepping_pseudocommand))
2547 stepping_actions = 1;
2548 else if (cmd_cfunc_eq (cmd, end_actions_pseudocommand))
2549 stepping_actions = 0;
2550 else if (cmd_cfunc_eq (cmd, collect_pseudocommand))
2552 /* Display the collected data.
2553 For the trap frame, display only what was collected at the trap.
2554 Likewise for stepping frames, display only what was collected
2555 while stepping. This means that the two boolean variables,
2556 STEPPING_FRAME and STEPPING_ACTIONS should be equal. */
2557 if (stepping_frame == stepping_actions)
2560 { /* repeat over a comma-separated list */
2561 QUIT; /* allow user to bail out with ^C */
2562 if (*action_exp == ',')
2564 while (isspace ((int) *action_exp))
2567 next_comma = strchr (action_exp, ',');
2569 if (0 == strncasecmp (action_exp, "$reg", 4))
2570 registers_info (NULL, from_tty);
2571 else if (0 == strncasecmp (action_exp, "$loc", 4))
2572 locals_info (NULL, from_tty);
2573 else if (0 == strncasecmp (action_exp, "$arg", 4))
2574 args_info (NULL, from_tty);
2579 make_cleanup (replace_comma, next_comma);
2582 printf_filtered ("%s = ", action_exp);
2583 output_command (action_exp, from_tty);
2584 printf_filtered ("\n");
2588 action_exp = next_comma;
2590 while (action_exp && *action_exp == ',');
2594 discard_cleanups (old_cleanups);
2597 /* Convert the memory pointed to by mem into hex, placing result in buf.
2598 * Return a pointer to the last char put in buf (null)
2599 * "stolen" from sparc-stub.c
2602 static const char hexchars[] = "0123456789abcdef";
2604 static unsigned char *
2605 mem2hex (unsigned char *mem, unsigned char *buf, int count)
2613 *buf++ = hexchars[ch >> 4];
2614 *buf++ = hexchars[ch & 0xf];
2623 get_traceframe_number (void)
2625 return traceframe_number;
2629 /* module initialization */
2631 _initialize_tracepoint (void)
2633 struct cmd_list_element *c;
2635 tracepoint_chain = 0;
2636 tracepoint_count = 0;
2637 traceframe_number = -1;
2638 tracepoint_number = -1;
2640 set_internalvar (lookup_internalvar ("tpnum"),
2641 value_from_longest (builtin_type_int, (LONGEST) 0));
2642 set_internalvar (lookup_internalvar ("trace_frame"),
2643 value_from_longest (builtin_type_int, (LONGEST) - 1));
2645 if (tracepoint_list.list == NULL)
2647 tracepoint_list.listsize = 128;
2648 tracepoint_list.list = xmalloc
2649 (tracepoint_list.listsize * sizeof (struct memrange));
2651 if (tracepoint_list.aexpr_list == NULL)
2653 tracepoint_list.aexpr_listsize = 128;
2654 tracepoint_list.aexpr_list = xmalloc
2655 (tracepoint_list.aexpr_listsize * sizeof (struct agent_expr *));
2658 if (stepping_list.list == NULL)
2660 stepping_list.listsize = 128;
2661 stepping_list.list = xmalloc
2662 (stepping_list.listsize * sizeof (struct memrange));
2665 if (stepping_list.aexpr_list == NULL)
2667 stepping_list.aexpr_listsize = 128;
2668 stepping_list.aexpr_list = xmalloc
2669 (stepping_list.aexpr_listsize * sizeof (struct agent_expr *));
2672 add_info ("scope", scope_info,
2673 "List the variables local to a scope");
2675 add_cmd ("tracepoints", class_trace, NULL,
2676 "Tracing of program execution without stopping the program.",
2679 add_info ("tracepoints", tracepoints_info,
2680 "Status of tracepoints, or tracepoint number NUMBER.\n\
2681 Convenience variable \"$tpnum\" contains the number of the\n\
2682 last tracepoint set.");
2684 add_info_alias ("tp", "tracepoints", 1);
2686 c = add_com ("save-tracepoints", class_trace, tracepoint_save_command,
2687 "Save current tracepoint definitions as a script.\n\
2688 Use the 'source' command in another debug session to restore them.");
2689 set_cmd_completer (c, filename_completer);
2691 add_com ("tdump", class_trace, trace_dump_command,
2692 "Print everything collected at the current tracepoint.");
2694 add_prefix_cmd ("tfind", class_trace, trace_find_command,
2695 "Select a trace frame;\n\
2696 No argument means forward by one frame; '-' meand backward by one frame.",
2697 &tfindlist, "tfind ", 1, &cmdlist);
2699 add_cmd ("outside", class_trace, trace_find_outside_command,
2700 "Select a trace frame whose PC is outside the given \
2701 range.\nUsage: tfind outside addr1, addr2",
2704 add_cmd ("range", class_trace, trace_find_range_command,
2705 "Select a trace frame whose PC is in the given range.\n\
2706 Usage: tfind range addr1,addr2",
2709 add_cmd ("line", class_trace, trace_find_line_command,
2710 "Select a trace frame by source line.\n\
2711 Argument can be a line number (with optional source file), \n\
2712 a function name, or '*' followed by an address.\n\
2713 Default argument is 'the next source line that was traced'.",
2716 add_cmd ("tracepoint", class_trace, trace_find_tracepoint_command,
2717 "Select a trace frame by tracepoint number.\n\
2718 Default is the tracepoint for the current trace frame.",
2721 add_cmd ("pc", class_trace, trace_find_pc_command,
2722 "Select a trace frame by PC.\n\
2723 Default is the current PC, or the PC of the current trace frame.",
2726 add_cmd ("end", class_trace, trace_find_end_command,
2727 "Synonym for 'none'.\n\
2728 De-select any trace frame and resume 'live' debugging.",
2731 add_cmd ("none", class_trace, trace_find_none_command,
2732 "De-select any trace frame and resume 'live' debugging.",
2735 add_cmd ("start", class_trace, trace_find_start_command,
2736 "Select the first trace frame in the trace buffer.",
2739 add_com ("tstatus", class_trace, trace_status_command,
2740 "Display the status of the current trace data collection.");
2742 add_com ("tstop", class_trace, trace_stop_command,
2743 "Stop trace data collection.");
2745 add_com ("tstart", class_trace, trace_start_command,
2746 "Start trace data collection.");
2748 add_com ("passcount", class_trace, trace_pass_command,
2749 "Set the passcount for a tracepoint.\n\
2750 The trace will end when the tracepoint has been passed 'count' times.\n\
2751 Usage: passcount COUNT TPNUM, where TPNUM may also be \"all\";\n\
2752 if TPNUM is omitted, passcount refers to the last tracepoint defined.");
2754 add_com ("end", class_trace, end_actions_pseudocommand,
2755 "Ends a list of commands or actions.\n\
2756 Several GDB commands allow you to enter a list of commands or actions.\n\
2757 Entering \"end\" on a line by itself is the normal way to terminate\n\
2759 Note: the \"end\" command cannot be used at the gdb prompt.");
2761 add_com ("while-stepping", class_trace, while_stepping_pseudocommand,
2762 "Specify single-stepping behavior at a tracepoint.\n\
2763 Argument is number of instructions to trace in single-step mode\n\
2764 following the tracepoint. This command is normally followed by\n\
2765 one or more \"collect\" commands, to specify what to collect\n\
2766 while single-stepping.\n\n\
2767 Note: this command can only be used in a tracepoint \"actions\" list.");
2769 add_com_alias ("ws", "while-stepping", class_alias, 0);
2770 add_com_alias ("stepping", "while-stepping", class_alias, 0);
2772 add_com ("collect", class_trace, collect_pseudocommand,
2773 "Specify one or more data items to be collected at a tracepoint.\n\
2774 Accepts a comma-separated list of (one or more) expressions. GDB will\n\
2775 collect all data (variables, registers) referenced by that expression.\n\
2776 Also accepts the following special arguments:\n\
2777 $regs -- all registers.\n\
2778 $args -- all function arguments.\n\
2779 $locals -- all variables local to the block/function scope.\n\
2780 Note: this command can only be used in a tracepoint \"actions\" list.");
2782 add_com ("actions", class_trace, trace_actions_command,
2783 "Specify the actions to be taken at a tracepoint.\n\
2784 Tracepoint actions may include collecting of specified data, \n\
2785 single-stepping, or enabling/disabling other tracepoints, \n\
2786 depending on target's capabilities.");
2788 add_cmd ("tracepoints", class_trace, delete_trace_command,
2789 "Delete specified tracepoints.\n\
2790 Arguments are tracepoint numbers, separated by spaces.\n\
2791 No argument means delete all tracepoints.",
2794 add_cmd ("tracepoints", class_trace, disable_trace_command,
2795 "Disable specified tracepoints.\n\
2796 Arguments are tracepoint numbers, separated by spaces.\n\
2797 No argument means disable all tracepoints.",
2800 add_cmd ("tracepoints", class_trace, enable_trace_command,
2801 "Enable specified tracepoints.\n\
2802 Arguments are tracepoint numbers, separated by spaces.\n\
2803 No argument means enable all tracepoints.",
2806 c = add_com ("trace", class_trace, trace_command,
2807 "Set a tracepoint at a specified line or function or address.\n\
2808 Argument may be a line number, function name, or '*' plus an address.\n\
2809 For a line number or function, trace at the start of its code.\n\
2810 If an address is specified, trace at that exact address.\n\n\
2811 Do \"help tracepoints\" for info on other tracepoint commands.");
2812 set_cmd_completer (c, location_completer);
2814 add_com_alias ("tp", "trace", class_alias, 0);
2815 add_com_alias ("tr", "trace", class_alias, 1);
2816 add_com_alias ("tra", "trace", class_alias, 1);
2817 add_com_alias ("trac", "trace", class_alias, 1);