4 * configure.in: configure cgen if --enable-cgen-maint.
5 * Makefile.in (ALL_MODULES,CLEAN_MODULES): Add all-cgen.
7 (all-opcodes,all-sim): Depend on all-cgen.
12 * ltconfig: Update to correct AIX handling.
16 * configure.in (noconfigdirs): Add configure pattern for mips tx39
21 * configure.in: Add cygmon and libstub support for mn10200.
25 * Makefile.in (grep): Grep no longer depends on libiberty.
29 * Makefile.in: all-snavigator needs all-libgui.
33 * configure.in: Add cygmon and libstub support for mn10300.
37 * missing: Update to version from automake 1.3.
39 * ltmain.sh: On installation, don't get confused if the same name
40 appears more than once in the list of library names.
44 * config.sub: Accept m68060 and m5200 as CPU names.
48 * configure: Use && rather than using -a in test, because odd
49 strings can confuse test.
50 * configure.in: Likewise.
54 * ltconfig, ltmain.sh: Bring in Visual C++ support.
58 * COPYING.LIB: Update FSF address.
62 * ltconfig, ltmain.sh: Update to libtool 1.2a.
64 * Makefile.in (GASB_SUPPORT_DIRS): Remove intl; already included via
69 * ltconfig, ltmain.sh: Avoid producing a version number if
70 -version-info was not used.
75 * Makefile.in: Add dependencies for boehm-gc to libjava.
80 * configure.in: Add --with-newlib to CONFIG_ARGUMENTS if we are
85 * Makefile.in (EXTRA_GCC_FLAGS): Remove backslash at end;
86 Solaris `make' causes it to continue to next definition.
91 * Makefile.in: Added dependencies to all-target-boehm-gc and
92 all-target-libjava to have them configure during the build.
98 * Makefile.in (install-gdbtk): Call this 'install-gdb' so that
99 the right GUI libraries and files are installed along with GDB.
104 * configure.in: Change alpha to alpha* in several places.
108 * config.sub: Recognize sparc86x.
112 * configure: Set CXXFLAGS from CXXFLAGS, not CFLAGS.
114 start-sanitize-cygnus
117 * Makefile.in: Added standard targets for `flexlm'.
118 Added intermodule dependency for `all-snavigator'.
120 * configure.in: Include `flexlm' as a host library.
125 * ltconfig: Update cygwin32 support.
127 * Makefile.in (GAS_SUPPORT_DIRS): Add intl.
128 (BINUTILS_SUPPORT_DIRS, GASB_SUPPORT_DIRS): Likewise.
129 (GDB_SUPPORT_DIRS): Likewise.
133 * configure.in (target_makefile_frag): If --enable-target-optspace,
134 use -Os to compile target libraries rather than -O2. Default to
135 using -Os for d10v and m32r if --{enable,disable}-target-optspace is
138 * configure.in (target_cflags): Ditto for d30v.
143 * Makefile.in (all-bfd): Depend on all-intl.
144 (all-binutils): Likewise.
146 (all-gprof): Likewise.
152 * Makefile.in (ALL_TARGET_MODULES): Added libjava, boehm-gc.
153 (CONFIGURE_TARGET_MODULES): Likewise.
154 (CHECK_TARGET_MODULES): Likewise.
155 (INSTALL_TARGET_MODULES): Likewise.
156 (CLEAN_TARGET_MODULES): Likewise.
157 (all-target-libjava): New target.
158 (all-target-boehm-gc): Likewise.
159 * configure.in (target_libs): Added libjava, boehm-gc.
164 * configure.in (host_tools): Fix typo, lbtool -> libtool.
168 * Makefile.in (all-bfd): Depend upon all-libiberty.
170 * ltconfig, ltmain.sh: Bring in newer cygwin32 support.
174 * Makefile.in: Add libstub.
176 * configure.in: Ditto. Build libstub for targets that have cygmon
181 * configure.in: Don't set PICFLAG on ix86-cygwin32.
185 * configure.in: Recognise i[3456]96-*-sysv5* as a valid host, and
186 use mh-sysv5 if specified. Support gprof on SCO Open Server.
190 * ltconfig: Add cygwin32 support.
192 * Makefile.in, configure.in: Add libtool as a native only directory
193 to configure and build.
197 * Makefile.in (EXTRA_GCC_FLAGS): XFOO lines shortened.
201 * Makefile.in: add ash make rules
202 * configure.in: add ash to native_only and host_tools lists
207 * Makefile.in: Add libidetcl, like libide.
208 (all-libide): Remove dependencies on all-tcl, all-tk, all-itcl,
210 * configure.IN: Add libidetcl, like libide.
211 * configure (GDB_TK): If enable_ide, add all-libidetcl.
216 * Makefile.in (all-gettext, all-intl): New targets.
217 (ALL_MODULES): Added all-gettext, all-intl.
218 (CROSS_CHECK_MODULES): Added check-gettext, check-intl.
219 (INSTALL_MODULES): Added install-gettext, install-intl.
220 (CLEAN_MODULES): Added clean-gettext, clean-intl.
222 * configure.in (host_tools): Added gettext.
223 (native_only): Likewise.
224 (noconfigdirs) [various cases]: Likewise.
225 (host_libs): Added intl.
230 * configure: Do not disable building gdbtk for cygwin32 hosts.
235 * Makefile.in: Revert yesterday's change.
236 (all-target-winsup): all-target-librx stays out of here.
240 * Makefile.in (TARGET_CONFIGDIRS, ALL_TARGET_MODULES,
241 CONFIGURE_TARGET_MODULES, CHECK_TARGET_MODULES,
242 INSTALL_TARGET_MODULES, CLEAN_TARGET_MODULES, all-target-winsup):
243 Remove references to librx and libg++.
247 * Makefile.in (BASE_FLAGS_TO_PASS): Pass $(lispdir) down to
252 * Makefile.in (CC_FOR_TARGET): Use $(TARGET_SUBDIR) when passing -B
253 for newlib directory.
254 (CXX_FOR_TARGET): Likewise.
258 * ltconfig: Update after libtool/ltconfig.in change for
263 * ltconfig, ltmain.sh: Update to libtool 1.2.
267 * configure.in: Add Thumb-pe target.
270 * Makefile.in - changed sn targets to snavigator
271 * configure.in - changed sn targets to snavigator
275 * config-ml.in: After building symlink tree call make distclean
276 if a Makefile got linked into ${ml_dir}/${ml_libdir}; this happens
277 to be the case for libiberty.
281 * config.sub: Accept alphapca56 and alphaev6 properly.
283 start-sanitize-vr4320
286 * config.sub (mips64vr4320-unknown-elf) : Added.
292 * config.sub (sco5): Fix typo.
296 * Makefile.in (INSTALL_MODULES): Move install-tcl before
298 (install-itcl): Remove dependency on install-tcl.
302 * configure.in: Remove libgloss from noconfigdirs for MN10300.
306 * configure: Don't let builds be done in source tree.
310 * configure.in: Don't build libgui for a cygwin32 target when not on
315 * configure (redirect): Set to null, so default behavior of
316 configure is now --verbose.
320 * ltmain.sh (mkdir): Check that the directory doesn't exist
321 before we exit with error, so that we don't get races during
326 * ltconfig, ltmain.sh: Update from libtool 1.0i.
330 * configure.in (host_tools, native_only): Add libtool.
334 * configure.in: add target-gperf to noconfigdirs for Cygwin32.
335 Fix typo in ming config comment.
339 * ltconfig, ltmain.sh: Update from libtool 1.0h.
343 * config.sub: Add tic30 cases, and map c30 to tic30.
347 * configure.in: Remove expect from noconfigdirs when target
348 is cygwin32. OK to build expect and dejagnu with Canadian
354 * configure.in: Add dvp-elf support.
355 * config.sub: Recognize dvp cpu.
360 * configure.in: Do build expect, dejagnu, and cvssrc for a cygwin32
363 * config.guess: Use ${UNAME_MACHINE} rather than i386 for cygwin32
368 * Makefile.in (BASE_FLAGS_TO_PASS): Remove passing $(local_prefix)
369 here as it is not defined in the toplevel Makefile.
373 * configure (package_makefile_rules_frag): New variable, which names
374 a file with generic rules, ...
375 Change comment to mention we now have FIVE parts.
376 * configure: Undo last change.
380 * config.guess: More accurate determination of HP processor types.
381 * config.sub: More accurate determination of HP processor types.
385 * configure (package_makefile_frag): Move inserting the
386 ${package_makefile_frag} to where it should be according
391 * config.guess: Add support for Linux/ARM.
395 * .cvsignore: Remove *-info and *-install since they match
396 release-info and mpw-install, which we don't want to just ignore.
400 * Makefile.in (FLAGS_TO_PASS): Pass down gcc_include_dir and
401 local_prefix to sub-make invocations.
405 * configure.in: Check makefile fragments in the source
410 * configure.in: check whether host and target makefile
411 fragments exist before adding them to *_makefile_frag
415 * configure.in (target_configdirs): Add cygmon for sparc64-elf.
419 * configure.in: Make sure we only replace RPATH_ENVVAR on
420 lines which begin with RPATH_ENVVAR, i.e. add "^" to the
423 * Makefile.in (BASE_FLAGS_TO_PASS): Pass RRPATH_ENVVAR down
428 * config-ml.in (multi-do): LDFLAGS must include multilib
433 * config.guess: Recognize i[3456]-i586-UnixWare7-sysv5.
437 * config.sub: Add mingw32 support.
438 * configure.in: Likewise.
439 * mh-mingw32: New file.
443 * configure.in: Finalize support for {alpha|powerpc}*-*-linux-gnulibc1
447 * Makefile.in (INSTALL_TARGET): Do install-gcc first.
448 * configure (gxx_include_dir): Provide a definition for subdirs
449 which do not use autoconf.
453 * config.guess: Sync with egcs. Picks up new alpha support,
454 BeOS & some additional linux support.
458 * config.guess: HP 9000/803 is a PA1.1 machine.
460 start-sanitize-vr5400
463 * config.sub (mips64vr5xxx-elf): Handle. Treat as mips64vr5000-elf.
469 * configure.in (host_makefile_frag, target_makefile_frag):
470 Handle multiple config files.
471 (alpha-*-linux*): Treat alpha-*-linux* as alpha-*-linux* and
481 * configure: Only put libide in GDB_TK if --enable-ide.
487 * configure.in (d30v-*-*): Allow configuring of libide, vmake, etc.
492 * Makefile.in: Add libgui directory.
493 (GDB_TK): Add all-libgui.
494 * configure.in: Add libgui directory.
495 * configure: Add all-libgui to GDB_TK.
499 * config-ml.in (multidirs): Add m32r to multilib list.
503 * Makefile.in (all-target-gperf): Change dependency to
504 all-target-libstdc++.
508 Source directory cvs renamed to cvssrc:
509 * configure.in (host_tools): Change cvs to cvssrc.
510 (native_only): Likewise.
511 (noconfigdirs) [various cases]: Likewise.
512 * Makefile.in (ALL_MODULES): Change all-cvs to all-cvssrc.
513 (CROSS_CHECK_MODULES): Change check-cvs to check-cvssrc.
514 (INSTALL_MODULES): Change install-cvs to install-cvssrc.
515 (CLEAN_MODULES): Change clean-cvs to clean-cvssrc.
516 (all-cvssrc): Rename target from all-cvs.
520 * configure.in (noconfigdirs): Add support for Thumb target.
522 * config.sub (maybe_os): Add support for Thumb target.
527 * configure (GDB_TK): add all-libide to dependency list
531 * configure.in (host_libs): Build libide all of the time.
532 (noconfigdirs): Remove libide from all places that set noconfigdirs.
536 * Makefile.in (all-vmake): remove double dependency on all-libide
541 * Makefile.in: Add rules for cygmon.
543 * configure.in: Build cygmon for sparc-elf and sparclite-aout.
547 * Makefile.in, configure, configure.in, ChangeLog: merge with foundry's
552 * ltmain.sh: If mkdir fails, check whether the directory was created
553 anyhow by some other process.
558 * configure.in (d30v-*-*): Configure all directories.
562 * configure.in (d30v-*-*): Configure newlib, libiberty directories
567 * configure.in (d30v-*-*): Configure target-libgloss on the D30V.
572 * include/libiberty.h: Add extern "C" { so it can be used with C++
574 * include/remote-sim.h: Add extern "C" { so it can be used with C++
580 * config.sub: Move tx19 configury to reduce spurious differences
587 * config.sub: Move tx49 configury to reduce spurious differences
594 * configure.in (d30v-*-*): Configure GCC now.
600 * config.sub: Add tx49 configury.
606 * Makefile.in (install-foundry): New target.
611 * configure.in: Remove a "second pass" of tweaking noconfigdirs,
616 * Makefile.in: check-target-libio depends on all-target-libstdc++.
618 start-sanitize-vr5400
621 * config.sub (maybe_os): Add mips64vr5400.
626 * makefile.vms: Fix to work with DEC C.
631 * Makefile.in (all-jstools): Depend on all-tix.
636 * config.sub: Add mips-tx39-elf to marketing names.
640 * ltmain.sh: Handle symlinks in generated script.
644 * configure: Handle autoconf style directory options: --bindir,
645 --datadir, --includedir, --infodir, --libdir, --libexecdir,
646 --mandir, --oldincludedir, --sbindir, --sharedstatedir,
648 * Makefile.in (sbindir, libexecdir, sysconfdir): New variables.
649 (sharedstatedir, localstatedir, oldincludedir): New variables.
650 (BASE_FLAGS_TO_PASS): Pass down bindir, datadir, includedir,
651 infodir, libdir, libexecdir, localstatedir, mandir, oldincludedir,
652 sbindir, sharedstatedir, and sysconfdir.
657 * configure.in (d30v): Remove tcl, tk, expect, gdb, itcl, tix, db,
658 sn, and gnuserv from noconfigdirs.
663 * ltmain.sh: Tweak shell pattern to avoid bug in NetBSD /bin/sh.
668 * configure (tooldir): enable_gdbtk=YES for cygwin32, NO for
669 windows. Consistent with gdb/configure.
674 * config/mt-linux: Define CXXFLAGS to make sure -fvtable-thunks is
676 * configure.in: Name Linux target fragment.
678 * configure: Rewrite so that project Makefile fragment is inserted
679 first and appears last in the resulting Makefile.
683 * Makefile.in (install-itcl): Install tcl first.
687 * config/mh-cygwin32: ok to build split texinfo files
691 * configure.in: remove bison from noconfigdirs for Cygwin32 host
695 * config.guess: Merge with FSF.
699 * config.sub: Add "marketing-names" patch.
702 * config.sub: Add tx19/r1900.
707 * configure.in (*-*-rtems*): Do not build libgloss for rtems.
712 * Makefile.in (GDB_TK): Add all-libide.
717 * ltconfig: Set CONFIG_SHELL in libtool.
718 * ltmain.sh: Use CONFIG_SHELL instead of /bin/sh
722 * Makefile.in (all-sim): Depends on all-readline.
726 * Makefile.in (BISON, YACC): Use $$s.
727 (all-bison): Depend on all-texinfo.
731 * Makefile.in (BISON): Add -L flag.
737 * configure.in (noconfigdirs): Add support for v850e target.
739 * config.sub (maybe_os): Add support for v850e target.
743 * configure.in (noconfigdirs): Add support for v850ea target.
745 * config.sub (maybe_os): Add support for v850ea target.
750 * config.sub: Add mipstx39. Delete r3900.
755 * Makefile.in (all-vmake): Depends on all-tix.
760 * Makefile.in (all-autoconf): Depends on all-texinfo.
764 * config-ml.in ({powerpc,rs6000}*-*-*): Update to current AIX and
769 * configure: Get CFLAGS and CXXFLAGS from Makefile, if possible.
771 * configure: When handling a Canadian Cross, handle YACC as well as
772 BISON. Just set BISON to bison. When setting YACC, prefer bison.
773 * Makefile.in (all-bison): Depend upon all-texinfo.
776 * Makefile.in (all-vmake): Depend upon all-tix.
781 * Makefile.in (BISON): bison, not byacc or bison -y.
782 (YACC): bison -y or byacc or yacc.
783 (various): Add *-bison as appropriate.
784 (taz): No need to mess with BISON anymore.
788 * configure: If OSTYPE matches *win32*, try to find a good value for
794 * Makefile.in, configure.in: Handle jstools like vmake.
799 * Makefile.in (taz): Get the version number from AM_INIT_AUTOMAKE in
800 configure.in if it is present.
804 * Makefile.in (LD_FOR_TARGET): Change ld.new to ld-new.
808 * config.sub: Recognize `arc' cpu.
809 * configure.in: Likewise.
810 * config-ml.in: Likewise.
814 * Makefile.in ($(INSTALL_X11_MODULES)): Depend upon installdirs.
818 * configure: Changed sed delimiter from ':' to '|' when
819 attempting to substitute ${config_shell} for SHELL. On
820 NT ${config_shell} may contain a ':' in it.
824 * Makefile.in (EXTRA_GCC_FLAGS): Fix for non-bash shells.
828 * Makefile.in (AS_FOR_TARGET): Change as.new to as-new.
832 * Makefile.in (NM_FOR_TARGET): Change nm.new to nm-new.
834 * ylwrap: If the program is a relative path, force it to be
839 * configure (tooldir): Set BISON to `bison -y' and not just bison.
843 * Makefile.in (CC_FOR_TARGET): When winsup/Makefile present,
844 correctly specify the target build directory $(TARGET_SUBDIR)/winsup
849 * Makefile.in (EXTRA_GCC_FLAGS): Fix handling of macros with values
855 * Makefile.in (DEVO_SUPPORT): Add ylwrap.
857 * ltmain.sh: Handle /bin/sh at start of install program.
859 * Makefile.in (DEVO_SUPPORT): Add ltconfig, ltmain.sh, and missing.
861 * ltconfig, ltmain.sh: New files, from libtool 1.0.
862 * missing: New file, from automake 1.2.
866 * Makefile.in: Treat tix like tk, putting it in X11_MODULES. Add
867 check-tk to CHECK_X11_MODULES.
871 * config.sub: Merge with FSF.
875 * config.guess: Merge with FSF.
879 * configure: Treat msdosdjgpp like go32.
880 * configure.in: Likewise. Don't remove gprof for go32.
882 * configure: Change Makefile.tem2 to Makefile.tm2.
886 * configure.in (noconfigdirs): For alpha-dec-osf*, don't ignore grep.
890 * install-sh (chmodcmd): Set to null if the DST directory already
891 exists. Same as Nov 11th change.
895 * configure (GDB_TK): Needs itcl and tix.
899 * config.guess: Update from FSF.
903 * Makefile.in (GDB_TK): Depend on itcl and tix.
907 * Makefile.in (INSTALL_PROGRAM_ARGS): New variable.
908 (INSTALL_PROGRAM): Use $(INSTALL_PROGRAM_ARGS).
909 (INSTALL_SCRIPT): New variable.
910 (BASE_FLAGS_TO_PASS): Pass down INSTALL_SCRIPT.
911 * configure.in: If host is *-*-cygwin32*, set INSTALL_PROGRAM_ARGS
913 * install-sh: Add support for -x option.
917 * configure.in, Makefile.in: Treat tix like itcl.
921 * Makefile.in (WINDRES): New variable.
922 (WINDRES_FOR_TARGET): New variable.
923 (BASE_FLAGS_TO_PASS): Add WINDRES_FOR_TARGET.
924 (EXTRA_HOST_FLAGS): Add WINDRES.
925 (EXTRA_TARGET_FLAGS): Add WINDRES.
926 (EXTRA_GCC_FLAGS): Add WINDRES.
927 ($(DO_X)): Pass down WINDRES.
928 ($(CONFIGURE_TARGET_MODULES)): Set WINDRES when configuring.
929 * configure: Treat WINDRES like DLLTOOL, and WINDRES_FOR_TARGET like
934 * configure.in: configure sim before gdb for win32-x-ppc
938 Move gperf into the toplevel, from libg++.
939 * configure.in (target_tools): Add target-gperf.
940 (native_only): Add target-gperf.
941 * Makefile.in (all-target-gperf): New target, depend on
943 (configure-target-gperf): Empty rule.
944 (ALL_TARGET_MODULES): Add all-target-gperf.
945 (CONFIGURE_TARGET_MODULES): Add configure-target-gperf.
946 (CHECK_TARGET_MODULES): Add check-target-gperf.
947 (INSTALL_TARGET_MODULES): Add install-target-gperf.
948 (CLEAN_TARGET_MODULES): Add clean-target-gperf.
952 * config.sub (mn10200): Recognize new basic machine.
956 * configure.in: Don't set ENABLE_MULTILIB, so we'll be passing
957 --enable-multilib down to subdirs; setting TARGET_SUBDIR was enough.
961 * configure.in: If we're building mips-sgi-irix6* native, turn on
962 ENABLE_MULTILIB and set TARGET_SUBDIR.
966 * Makefile.in (all-sn): Depend on all-grep.
970 * configure.in: Use mh-ppcpic and mt-ppcpic for powerpc*-* targets.
972 * configure: Set CFLAGS and CXXFLAGS, and substitute them into
974 * Makefile.in: Add comment for CFLAGS and CXXFLAGS.
976 * Makefile.in (DISTBISONFILES): Remove.
977 (taz): Don't futz with DISTBISONFILES. Change BISON to use
980 * configure.in: Build itl, db, sn, etc., when building for native
983 * Makefile.in (LD): New variable.
984 (EXTRA_HOST_FLAGS): Pass down LD.
989 * Makefile.in (INSTALL): Use $(SHELL) when executing install-sh.
993 * configure.in (targargs): Strip out any supplied --build argument
994 before adding our own. Always add --build.
998 * configure.in (targargs): Pass --build if we're doing
1003 * configure: Use '|' instead of ":" as the seperator in
1004 sed. Otherwise sed chokes on NT path names with drive
1005 designators. Also look for "?:*" as the leading characters in an
1010 * config.sub: Support for r3900.
1014 * configure.in: Use install-sh, not install.sh.
1018 * Makefile.in (taz): Improve check for BISON so it doesn't try to
1023 * Makefile.in (INSTALL_MODULES): Put install-opcodes before
1028 * Makefile.in: Add automake targets.
1029 * configure.in (host_tools): Add automake.
1034 * Makefile.in (all-libide): Depend upon all-ilu.
1039 * configure: Default CXX to c++, not gcc.
1040 * Makefile.in (CXX): Set to c++, not gcc.
1041 (CXX_FOR_TARGET): When cross, transform c++, not gcc.
1046 * Makefile.in: Add ILU targets.
1047 * configure.in (host_tools): Add ILU.
1052 * install-sh: try appending a .exe if source file doesn't
1057 * configure.in: Turn on multilib by default.
1058 (cross_only): Remove target-libiberty.
1060 * Makefile.in (all-gcc): Don't depend on libiberty.
1065 * configure.in (host_tools): Added vmake.
1070 * config.guess: improve algorithm for recognizing Gnu Hurd x86.
1074 * Makefile.in (DEVO_SUPPORT): Add mpw-install.
1075 (DISTBISONFILES): Add ld/Makefile.in
1079 * configure.in: if target is cygwin32 but host isn't cygwin32,
1080 don't configure gdb tcl tk expect, not just gdb.
1084 * configure.in: Added gnuserv everywhere sn appears.
1086 * Makefile.in (ALL_MODULES): Added all-gnuserv.
1087 (CROSS_CHECK_MODULES): Added check-gnuserv.
1088 (INSTALL_MODULES): Added install-gnuserv.
1089 (CLEAN_MODULES): Added clean-gnuserv.
1090 (all-gnuserv): New target.
1095 * configure.in (host_libs): Added libide.
1096 Skip libide, vmake if no X. Also skip these everywhere that sn is
1099 * Makefile.in (ALL_MODULES): Added all-vmake, all-libide.
1100 (CROSS_CHECK_MODULES): Added check-vmake, check-libide.
1101 (INSTALL_MODULES): Added install-vmake, install-libide.
1102 (CLEAN_MODULES): Added clean-vmake, clean-libide.
1103 (all-vmake, all-libide): New targets.
1108 * config.guess: Fixes for MIPS OpenBSD systems.
1112 * Makefile.in (INSTALL_XFORM): Remove.
1113 (BASE_FLAGS_TO_PASS): Remove INSTALL_XFORM.
1115 * mkinstalldirs: New file, copied from automake.
1116 * Makefile.in (installdirs): Rename from install-dirs. Use
1117 mkinstalldirs. Change all users.
1118 (DEVO_SUPPORT): Add mkinstalldirs.
1122 * install-sh: Rename from install.sh.
1123 * Makefile.in (INSTALL): Change install.sh to install-sh.
1124 (DEVO_SUPPORT): Likewise.
1126 * configure: Use ${config_shell} with ${moveifchange}. From Thomas
1131 * config.guess: Recognize OpenBSD systems correctly.
1135 * README, Makefile.in (ETC_SUPPORT): Remove references to
1136 cfg-paper*, configure.{texi,man,info*}._
1140 * Makefile.in (all.normal): Ensure that gcc is built after all
1141 the x11 - ie gdb - targets.
1145 * makefile.vms: Don't run conf-a-gas.
1149 * configure.in (hppa1.1-*-rtems*): New target, like hppa-*-*elf*.
1151 start-sanitize-tic80
1154 * configure.in: Remove noconfigdirs case since gdb also
1155 configures and builds for tic80-coff.
1160 * configure: Set cache_file to config.cache.
1161 * Makefile.in (local-distclean): Remove config.cache.
1165 * COPYING: Update FSF address.
1167 start-sanitize-tic80
1170 * configure.in (tic80-*-*): Remove G++ libraries and libgloss from
1176 * Makefile.in (install-dirs): Don't crash if prefix, and hence
1181 * config.sub: Tweak mn10300 entry.
1185 * configure.in (host_tools): Put sim before gdb, so gdb's
1186 configure.tgt can determine if the simulator was configured.
1190 * config.sub: Move BeOS $os case to be with other Cygnus
1195 * config.sub: Remove misplaced comment that broke Linux.
1199 * config.sub: Add BeOS support.
1203 * Makefile.in (CHECK_X11_MODULES): Don't run check-tk.
1207 * configure.in (noconfigdirs): Remove tcl and tk from
1208 noconfigdirs for cygwin32 builds.
1210 start-sanitize-tic80
1213 * configure.in (tic80-*-*): Remove ld from noconfigdirs.
1218 * Makefile.in (GAS_SUPPORT_DIRS, BINUTILS_SUPPORT_DIRS): Remove
1219 make-all.com, use makefile.vms instead.
1223 * config.sub: Accept -lnews*.
1228 * configure.in (noconfigdirs): Disable target-newlib,
1229 target-examples and target-libiberty for d30v.
1232 start-sanitize-tic80
1235 * configure.in (host_libs): Build itcl after tcl, tk.
1237 * configure.in (host_libs): Added db, itcl.
1238 (host_tools): Added sn.
1239 (noconfigdirs): Added itcl, db, sn in appropriate places.
1240 (native_only): Added sn.
1242 * Makefile.in (all-db, all-sn): New targets.
1243 (ALL_MODULES): Added all-sn.
1244 (CROSS_CHECK_MODULES): Added check-sn.
1245 (INSTALL_MODULES): Added install-sn.
1246 (CLEAN_MODULES): Added clean-sn.
1252 * configure.in (noconfigdirs): Enable ld for d30v.
1255 start-sanitize-tic80
1258 * configure.in (tic80-*-*): Build compiler.
1264 * configure.in (d30v-*): Remove sim directory from list of
1265 unsupported d30v directories
1271 * config.sub, configure.in: Add d30v target cpu.
1276 * makefile.vms: New file.
1277 * make-all.com: Remove.
1281 * Makefile.in (EXTRA_GCC_FLAGS): Add LIBGCC2_DEBUG_CFLAGS.
1283 start-sanitize-r5900
1286 * config.sub, configure.in: add r5900
1291 * Makefile.in (all-itcl): The rule is all-itcl, not all-tcl.
1295 * Makefile.in (ALL_MODULES): Added all-db.
1296 (CROSS_CHECK_MODULES): Addec check-db.
1297 (INSTALL_MODULES): Added install-db.
1298 (CLEAN_MODULES): Added clean-db.
1302 * config.guess: Merge with latest FSF sources.
1306 * Makefile.in (ALL_MODULES): Added all-itcl.
1307 (CROSS_CHECK_MODULES): Added check-itcl.
1308 (INSTALL_MODULES): Added install-itcl.
1309 (CLEAN_MODULES): Added clean-itcl.
1313 * configure.in: build gdb for mn10200
1317 * Makefile.in (all-target-winsup): Depend on all-target-libio.
1319 start-sanitize-tic80
1322 * configure.in (tic80-*-*): Turn off most targets right now.
1327 * Makefile.in (MAKEINFO): Check for the existence of the Makefile,
1328 rather than the makeinfo program.
1329 (do-info): Depend upon all-texinfo.
1333 * configure.in: Remove uses of config/mh-linux.
1335 * config.sub, config.guess: Merge with latest FSF sources.
1337 start-sanitize-tic80
1340 * config.sub (case $basic_machine): Add tic80 entries.
1345 * config.sub, config.guess: Merge with latest FSF sources.
1349 * mpw-build.in: Build ld before gcc, use NewFolderRecursive.
1350 * mpw-config.in: Test for NewFolderRecursive.
1351 * mpw-install: Use symbolic name for startup filename.
1352 * mpw-README: Add various additional details.
1356 * configure.in (mips*-sgi-irix6*): Remove binutils from noconfigdirs.
1360 * configure.in: Do build gcc and the target libraries for
1365 * configure.in: don't avoid building gdb for mn10300 any more
1366 * Makefile.in: double-quote GCC_FOR_TARGET line in EXTRA_GCC_FLAGS
1367 instead of single-quoting it.
1371 * configure.in: Don't use --with-stabs on IRIX 6.
1375 * configure.in (m32r): Build gdb, libg++ now.
1379 * configure.in (mips*-sgi-irix6*): Remove gdb and related
1380 directories from noconfigdirs.
1384 * config.sub (basic_machine): added mips16 configuration
1388 * config.sub: Handle d10v-unknown.
1392 * gcc/depragmaize.c: Handle MSDOS's (non-unix) text files.
1396 * config.sub: Handle v850-unknown.
1400 * Makefile.in: add findutils
1401 * configure.in: add findutils to list of host_tools
1405 * config.sub: Handle mn10200 and mn10300.
1409 * configure.in (d10v-*): Do not build librx.
1413 * configure.in (mn10300): Build everything except gdb & libgloss.
1417 * config.guess: Patch for Dansk Data Elektronik servers,
1420 For ncr, use /bin/uname rather than uname, since GNU uname does not
1423 Patch for MIPS R4000 running System V,
1426 Fix thinko for nextstep.
1431 * config.guess: Guess mips-dec-mach_bsd4.3.
1434 * config.guess (i?86-ncr-sysv*): Emit just enough of the minor
1436 * config.guess (mips-mips-riscos*): Emit just enough of the
1440 * config.guess (sparc-auspex-sunos*): Added.
1441 (f300-fujitsu-*): Added.
1444 * config.guess: Recognize a Tadpole as a sparc.
1448 * config.guess: Don't assume that NextStep version is either 2 or
1449 3. NextStep 4 (aka OpenStep 4) has come out now.
1453 * config.guess: Support Cray T90 that reports itself as "CRAY TS".
1458 * config.sub: Contributions from bug-gnu-utils to:
1459 Support plain "hppa" (no version given) architecture, reported by
1461 OpenBSD like NetBSD.
1462 LynxOs is not a hardware supplier.
1464 * config.guess: Contributions from bug-gnu-utils to add support for:
1465 OpenBSD like NetBSD.
1467 More Pyramid systems.
1468 i[n>4]86 Intel chips.
1469 M680[n>4]0 Motorola chips.
1470 Use unknown instead of lynx for hardware manufacturer.
1474 * install.sh (chmodcmd): Set to null if the DST directory already
1479 * configure.in (powerpc*-{eabi,elf,linux,rtem,sysv,solaris}*): Do
1480 not use mt-ppc target Makefile fragment any more.
1484 * configure.in (*-*-windows): Exclude everything but those dirs
1485 needed to build windows.
1489 * Makefile.in (all-target-winsup): Depend on all-target-librx.
1493 * configure.in: Exclude mmalloc from i386-windows.
1494 * config/mh-windows: Add rules for building MSVC makefiles.
1498 * Undo my previous change.
1502 * Makefile.in (EXTRA_GCC_FLAGS): Pass down GCC_FOR_TARGET
1504 (MAKEOVERRIDES): Define (revert this part of October 18 change).
1508 * Makefile.in (FLAGS_TO_PASS): Add $(HOST_FLAGS) to allow the
1509 host to add it's own flags.
1510 * config/mh-windows (HOST_FLAGS): Set srcroot, which is needed
1511 for MSVC build procedure.
1515 * configure: Handle GCC_FOR_TARGET like CC_FOR_TARGET.
1519 * Makefile.in (CC_FOR_TARGET): Check for xgcc, not Makefile.
1520 (CXX_FOR_TARGET): Likewise.
1521 (GCC_FOR_TARGET): Define.
1522 (BASE_FLAGS_TO_PASS): Remove GCC_FOR_TARGET.
1523 (EXTRA_GCC_FLAGS): Define GCC_FOR_TARGET based on whether
1524 CC_FOR_TARGET was specified on the command line.
1525 (MAKEOVERRIDES): Don't define.
1529 * configure.in (m32r): Fix spelling of libg++ libs.
1533 * config.sub (-apple*): Remove, now redundant.
1537 * configure: Don't get confused by CPU-VENDOR-linux-gnu.
1539 * configure: Rework yesterday's sed script patch.
1541 * config.sub: Merge with FSF.
1545 * config.guess: Merge from FSF.
1548 * config.guess: Use pc instead of unknown, for pc clone systems.
1549 Change linux to linux-gnu.
1552 * config.guess: Avoid non-portable tr syntax.
1556 * test-build.mk (HOLES): Add "xargs" for gdb.
1558 * configure: Avoid hpux10.20 sed bug.
1562 * configure.in config/mh-windows: Add support for windows host
1563 (that is a build done under the Microsoft build environment).
1567 * Makefile.in: Replace all uses of srcroot with s, to shrink
1568 command line lengths.
1571 * configure.in: If configuring for newlib, pass --with-newlib to
1573 * Makefile.in (CC_FOR_TARGET): If winsup/Makefile exists, pass a
1574 -Bnewlib/ and -Lwinsup to gcc.
1575 (CXX_FOR_TARGET): Likewise.
1579 * Makefile.in (ETC_SUPPORT): Add configure.
1583 * configure.in: Use config/mh-dgux386 for i[345]86-dg-dgux
1584 host configuration file.
1588 * configure.in: Break mn10x00 support into separate
1589 mn10200 and mn10300 configurations.
1590 * config.sub: Likewise.
1594 * configure.in: Add lots of stuff to noconfigdirs for
1595 the mn10x00 targets.
1597 * config.sub, configure.in: Add mn10x00 support.
1601 * make-all.com: Call conf-a-gas, not config-a-gas.
1605 * configure.in (noconfigdirs): Don't build libgloss for arm-coff
1610 * mpw-README: Add much more detail for native PowerMac.
1611 * mpw-install: New file.
1612 * mpw-configure: Add --norecursion and --help options.
1613 * mpw-config.in: Translate readme and install files when
1615 * mpw-build.in: Don't always depend on byacc and flex.
1616 (install-only-top): New action.
1620 * configure.in: You can now configure GDB for the v850.
1624 * configure.in (noconfigdirs): Don't configure any C++ dirs
1629 * config.sub: Recognize mips64vr5000.
1633 * configure.in: Use a single line for host_tools and native_only.
1637 * config.sub, configure.in: Add entries for m32r.
1641 * Makefile.in (inet-install): Don't run install-gzip.
1645 * configure.in: Don't config lots of things for *-*-windows*.
1649 * mpw-config.in: Test for mpw-true, true, and null-command scripts.
1650 (host_libs, host_tools): Copy from configure.in.
1651 * mpw-configure: Don't complain about directories not found.
1655 * configure.in (i[345]86): Recognize i686 for pentium pro.
1656 (i[3456]86-*-dgux*): Use config/mh-sysv for the host configuration
1659 * config.guess (i[345]86): Ditto.
1663 * configure.in (noconfigdirs): Removed gdb for D10V.
1667 * configure.in: Remove ld, target-libio, target-libg++, and
1668 target-libstdc++ from noconfigdirs.
1672 * configure: Fix three locations where shell scripts were
1673 being run directly rather than with config_shell.
1677 * configure.in (v850-*-*): Set up initial $noconfigdirs.
1678 * config.sub (basic_machine): Recognize v850.
1682 * mpw-configure: Handle multiple enable/disable options and
1683 pass them down recursively, handle -c and -s flags appropriately
1684 depending on choice of compiler, add escape mechanism for
1685 quoted arguments to gC.
1689 * configure.in (powerpc*-*-*): For eabi, system V.4, Linux, and
1690 solaris targets, use config/mt-ppc to set C{,XX}FLAGS_FOR_TARGETS
1691 so that -mrelocatable-lib and -mno-eabi are used.
1693 * Makefile.in (CONFIGURE_TARGET_MODULES): If target compiler does
1694 not support --print-multi-lib, don't abort.
1698 * config/mh-cygwin32 (CFLAGS): Define _WIN32 to be compatible
1699 with normal Windows compilation environment.
1703 * make-all.com: Run config-a-gas.
1704 * setup.com: Don't copy subdirectory files around.
1708 * configure.in (*-*-ose): Remove exclusion of libgloss for this
1709 target, it now compiles correctly.
1713 * mpw-config.in: Generate Mac include for elf/dwarf2.h.
1717 * configure.in (d10v-*-*): Remove ld from $noconfigdirs.
1721 * configure.in (native_only): Add prms.
1725 * Makefile.in (GAS_SUPPORT_DIRS): Add make-all.com and setup.com.
1726 (BINUTILS_SUPPORT_DIRS): Likewise.
1730 * configure.in (d10v-*-*): Don't configure ld or gdb until the
1731 d10v support is added.
1735 * configure.in (d10v-*-*): New target.
1739 * config.guess (HP 9000/811): Recognize this as a PA1.1
1744 * Makefile.in (do-tar-gz): New target, split out from tail end of
1745 taz target. Run each command separately, don't use pipes.
1750 * mpw-configure: Look for g-mpw-make.sed in config/mpw.
1751 * mpw-build.in: No builds should depend on building byacc or flex,
1752 they are assumed to be installed already.
1756 * Makefile.in (CONFIGURE_TARGET_MODULES): Set r environment
1757 variable that CC_FOR_TARGET needs.
1761 * Makefile.in (CONFIGURE_TARGET_MODULES): Determine if the multlib
1762 options have changed since the last time the subdirectory was
1763 configured, and if it has, reconfigure.
1764 (CLEAN_TARGET_MODULES): Delete multilib.out and tmpmulti.out, which
1765 CONFIGURE_TARGET_MODULES uses to remember the old multilib options.
1769 * Makefile.in (ALL_MODULES,CROSS_CHECK_MODULES,INSTALL_MODULES,
1770 CLEAN_MODULES): Add bash.
1771 (all-bash): New target.
1775 * configure.in (mips-sgi-irix6*): Use mh-irix6 instead of mh-irix5.
1779 * config.sub (basic_machine): Recognize d10v as a valid processor.
1783 * mpw-configure: Add support for --bindir.
1784 * mpw-build.in: Use a GCC-specific build script for GCC actions.
1788 * configure.in: add bash, time, gawk to list of hosttools and things
1789 to only build for native toolchains
1793 * Makefile.in (docdir): Remove.
1797 * Makefile.in (datadir): Set to $(prefix)/share.
1801 * configure.in: build diff and patch for cygwin32-hosted
1806 * config.sub: Accept -rtems*.
1810 * configure.in: enable dosrel for cygwin32-hosted builds,
1811 remove diff from the list of things not buildable
1816 * Makefile.in (TARGET_SUBDIR): Move comment to previous line so we
1821 * configure.in (mips*-sgi-irix6*): Set noconfigdirs appropriately.
1825 * Makefile.in (taz): Handle case where tex3patch didn't even get
1826 checked out. Also, if it was found, put the symlink in a new util
1831 * config.guess (*:Linux:*:*): Add support for PowerPC Linux.
1835 * config.sub: Recognize -openvms.
1836 * configure.in (alpha*-*-*vms*): Set noconfigdirs.
1837 * make-all.com, setup.com: New files.
1841 * Makefile.in (taz): tex3patch moved to texinfo/util.
1845 start-sanitize-gdbtk
1846 * configure: enable_gdbtk=no for cygwin32-hosted toolchains
1848 * configure.in: remove make from disable-if-Can-Cross list
1849 enable gdb if ${host} and ${target} are cygwin32
1853 * config.guess (i?86-ncr-sysv*): Emit minor release numbers.
1854 Recognize the NCR 4850 machine and NCR Pentium-based platforms.
1858 * config.guess: Combine mips-mips-riscos cases, and use cpp to
1859 distinguish sysv/svr4/bsd variants.
1864 * configure.in: Added copyright notice.
1865 * move-if-change: Added copyright notice.
1869 * configure.in (powerpcle-*-solaris*): Until we get shared
1870 libraries working, don't build gdb, sim, make, tcl, tk, or
1875 * config.guess: Merge with FSF:
1878 * config.guess (*:Linux:*:*): Add guess for sparc-unknown-linux.
1881 * config.guess (AViiON:dgux:*:*): Fix typo in recognizing mc88110.
1884 * config.guess: Combine two OSF1 rules.
1886 * config.guess (dgux): Use /usr/bin/uname rather than uname,
1891 * Makefile.in (MAKEDIRS): Removed $(tooldir).
1895 * mpw-README: Document GCCIncludes.
1899 * configure.in (alpha-*-linux*): Set enable_shared to yes.
1903 * mpw-configure: Handle --enable-FOO and --disable-FOO.
1907 * configure.in (*-*-cygwin32): Configure make.
1911 * Makefile.in (inet-install): Quote value of INSTALL_MODULES.
1915 * Makefile.in (all-inet): Depend on all-perl.
1917 * Makefile.in (inet-install): New target.
1919 * Makefile.in (all-inet): Depend on all-tcl.
1920 (all-inet): Depend on all-send-pr.
1924 * configure.in (powerpcle-*-solaris*): Turn off tk and tcl
1929 * configure.in: Don't configure --with-gnu-ld on AIX.
1933 * configure.in (powerpcle-*-solaris*): Turn off gdb temporarily.
1937 * Makefile.in (ALL_MODULES): Added all-inet.
1938 (CROSS_CHECK_MODULES): Added check-inet.
1939 (INSTALL_MODULES): Added install-inet.
1940 (CLEAN_MODULES): Added clean-inet.
1941 (all-indent): New target.
1943 * configure.in (host_tools): Added inet.
1944 (native_only): Added inet.
1945 (noconfigdirs): Added inet.
1949 * configure.in: Don't configure libgloss if we are not configuring
1954 * configure.in: Don't configure libgloss for unsupported
1959 * Makefile.in (CLEAN_MODULES): Add clean-apache.
1963 * Makefile.in (ALL_MODULES): Include all-apache.
1964 (CROSS_CHECK_MODULES): Include check-apache.
1965 (INSTALL_MODULES): Include install-apache.
1966 (all-apache): New target.
1968 * configure.in: Added apache everywhere perl is seen.
1972 * Makefile.in: Add support for clean-{module} and
1973 clean-target-{module} rules.
1977 * configure.in (*-*-ose) do not build libgloss.
1981 * config.guess (prep*:SunOS:5.*:*): Turn into
1982 powerpele-unknown-solaris2.
1986 * configure.in: Permit --enable-shared to specify a list of
1991 * configure.in (host==solaris): Pass only the first word of $CC
1992 to /usr/bin/which when checking if we're using /usr/ccs/bin/cc.
1996 * Makefile.in (BASE_FLAGS_TO_PASS): pass down $(MAKE).
2000 * Makefile.in (ALL_MODULES): Include all-perl.
2001 (CROSS_CHECK_MODULES): Include check-perl.
2002 (INSTALL_MODULES): Include install-perl.
2003 (ALL_X11_MODULES): Include all-guile.
2004 (CHECK_X11_MODULES): Include check-guile.
2005 (INSTALL_X11_MODULES): Include install-guile.
2006 (all-perl): New target.
2007 (all-guile): New target.
2009 * configure.in (host_tools): Include perl and guile.
2010 (native_only): Include perl and guile.
2011 (noconfigdirs): Don't build guile and perl; no ports have been
2016 * configure (--enable-*): Handle quoted option lists such as
2017 --enable-sim-cflags='-g0 -O' better.
2021 * Makefile.in ({,inst}all-target): New rule so we can make and
2022 install all of the target directories easily.
2026 * configure.in: Add missing global flag in sed substitution when
2027 deleting `target-' from ${configdirs}.
2031 * Makefile.in (DO_X): Don't get confused if CC contains `=' in an
2034 * configure.in (mips*-nec-sysvr4*): Use a host_makefile_frag of
2037 * install.sh: Correct misspelling of transformbasename.
2039 * config.guess: Recognize mips-*-sysv*.
2043 * config.sub: Recognize mon960.
2047 * configure: Restore Canadian Cross handling of BISON and LEX,
2048 removed in Feb 20 change.
2053 Mention make install. Remove the old copyright date as well the
2054 clumsy and rather pointless copyright on the README file.
2058 * Makefile.in ($(CONFIGURE_TARGET_MODULES)): If there is a
2059 Makefile after running symlink-tree, then run `make distclean' to
2060 avoid clobbering any generated files in srcdir.
2064 * configure.in (m68k-*-netbsd*): Build everything now.
2068 * Makefile.in (taz): Fix quoting.
2072 * configure.in (sparclet-*-*): Build everything now.
2076 * configure.in (m68k-*-linux*): New host.
2080 * configure: Check for bison before byacc.
2084 * Makefile.in configure: Change the way LEX and BISON/YACC are
2085 set. configure now defines DEFAULT_LEX and DEFAULT_YACC by
2086 searching PATH. These are used as fallbacks by Makefile.in if
2087 flex/bison/byacc aren't in objdir.
2091 * Makefile.in: Make everything which depends upon all-bfd also
2092 depend upon all-opcodes, in case --with-commonbfdlib is used.
2096 * configure.in (host *-*-cygwin32): Don't build gdb if we are
2097 building NT native compilers on Unix.
2101 * configure.in: Don't get CC from the host Makefile fragment if we
2102 can find gcc in PATH, or if this is a Canadian Cross. Move the
2103 Solaris test for /usr/ucb/cc to the post target script, just after
2104 the compiler sanity test.
2108 * config.sub: Merge with FSF.
2112 * Makefile.in (RPATH_ENVVAR): New variable.
2113 (REALLY_SET_LIB_PATH): Use it.
2114 * configure.in: On HP/UX, set RPATH_ENVVAR to SHLIB_PATH.
2118 * config.sub, configure.in: Recognize sparclet cpu.
2122 * config.guess: Support m68k-cbm-sysv4.
2126 * config.guess (*:Linux:*:*): Guess m68k-unknown-linux and
2127 m68k-unknown-linuxaout from linker help string. Put quotes around
2132 * config.guess (powerpc-harris-powerunix): Add guess for port
2137 * config.guess (UNAME_VERSION): Recognize X4.x as an OSF version.
2141 * configure.in: If --enable-shared was used, set SET_LIB_PATH to
2142 $(REALLY_SET_LIB_PATH) in Makefile.
2143 * Makefile.in (SET_LIB_PATH): New variable.
2144 (REALLY_SET_LIB_PATH): New variable.
2145 ($(DO_X)): Use $(SET_LIB_PATH).
2146 (install.all, gcc-no-fixedincludes, $(ALL_MODULES)): Likewise.
2147 ($(NATIVE_CHECK_MODULES), $(CROSS_CHECK_MODULES)): Likewise.
2148 ($(INSTALL_MODULES), $(CONFIGURE_TARGET_MODULES)): Likewise.
2149 ($(ALL_TARGET_MODULES), $(CHECK_TARGET_MODULES)): Likewise.
2150 ($(INSTALL_TARGET_MODULES), $(ALL_X11_MODULES)): Likewise.
2151 ($(CHECK_X11_MODULES), $(INSTALL_X11_MODULES)): Likewise.
2152 (all-gcc, all-bootstrap, check-gcc, install-gcc): Likewise.
2153 (install-dosrel): Likewise.
2154 (all-opcodes): Depend upon all-libiberty.
2158 * config.guess (*:CYGWIN*): New
2162 * Makefile.in (all-target-winsup): All all-target-libiberty.
2166 * configure.in (noconfigdirs): Add missing # in front of comment.
2170 * configure.in: add second pass to things added to noconfigdirs
2171 so *-gm-magic can exclude libgloss properly.
2175 * mpw-configure (extralibs_name, rez_name): Set correctly
2176 for MWC68K compiler.
2178 * mpw-README: Add more info on the necessary build tools.
2182 * configure.in, config.sub: Recognize cygwin32.
2186 * config.guess, config.sub: Recognize A/UX.
2190 * config.sub: Merge with gcc/config.sub.
2194 * mpw-build.in (do-binutils): Add build of stamps.
2198 * config.sub: Add recognition for mips64vr4100*-* targets.
2202 * test-build.mk: Add checking of `hpux9' rather than just `hpux'.
2203 Add creation of gconfigargs with `--enable-shared' turned on.
2204 ($(host)-stamp-stage2-configured): Pass $(gconfigargs).
2205 ($(host)-stamp-stage3-configured): Likewise.
2206 (HOLES): Add chatr and ldd.
2207 (i386-ncr-sysv4.3*): Add use of /usr/ccs/bin in the PATH and HOLE_DIRS.
2211 * configure: Pass --nfp to recursive configures.
2215 * Makefile.in (DLLTOOL): New.
2216 (DLLTOOL_FOR_TARGET): New.
2217 (EXTRA_HOST_FLAGS): Pass down DLLTOOL.
2218 (EXTRA_TARGET_FLAGS): Ditto.
2219 (EXTRA_GCC_FLAGS): Ditto.
2220 (CONFIGURE_TARGET_MODULES): Ditto.
2222 * configure: Add DLLTOOL.
2227 * configure.in (i[345]86-*-sco3.2v5*): Use mh-sysv instead of
2228 mh-sco, since old workarounds no longer needed, and don't
2229 build ld, since libraries have weak symbols in COFF.
2233 * Makefile.in (CONFIGURE_TARGET_MODULES): Add missing ';'.
2237 * configure.in: Make sure that ${CC} can be used to compile an
2240 start-sanitize-gdbtk
2243 * Makefile.in (all-gdb): Depend on $(GDB_TK).
2244 * configure (GDB_TK): Set GDB_TK to either "all-tcl all-tk" or
2245 nothing depending on whether gdbtk is being built.
2250 * Makefile.in (newlib.tar.gz): Delete building of newlib's info files.
2254 * configure.in (noconfigdirs): Put ld or gas in this early, if the
2255 user specifically used --with-gnu-ld=no or --with-gnu-as=no.
2259 * config-ml.in: Add support for
2260 --disable-{softfloat,m68881,m68000,m68020} on m68*-*-*.
2261 Simplify setting of multidirs from --disable-foo.
2265 * Makefile.in (EXTRA_GCC_FLAGS): If any of the make variables
2266 LANGUAGES, BOOT_CFLAGS, STMP_FIXPROTO, LIMITS_H_TEST,
2267 LIBGCC1_TEST, LIBGCC2_CFLAGS, LIBGCC2_INCLUDES, and ENQUIRE are
2268 non-empty, pass them on to the GCC make.
2269 (all-bootstrap): New rule that is like all-gcc, except it executes
2270 the GCC bootstrap rule instead of the GCC all rule.
2274 * config-ml.in (ml_realsrcdir): New, to account for ${subdir}.
2278 * config.guess (AViiON:dgux:*:*): Update from FSF to add pentium
2283 * config.sub (i*86*) Change [345] to [3456]
2287 * configure.in (noconfigdirs): Add gas or ld if --with-gnu-as=no or
2292 * config-ml.in (rs6000*, powerpc*): Add switches to control which
2293 AIX multilibs get built.
2297 * configure.in (i386-win32): Don't build expect if we're not
2298 building the tcl subdir.
2302 * Makefile.in: (configure-target-examples, all-target-examples):
2303 New targets, configure and build example programs.
2307 * mpw-configure: If an mpw-config.in generated a file mk.sed,
2308 use it as input to sedit the generated MPW makefile.
2309 * mpw-README: Add a suggestion about Gestalt.h.
2313 * config.sub: Accept *-*-ieee*.
2317 * Makefile.in (local-distclean): Remove $(TARGET_SUBDIR). From
2322 * configure.in (host==powerpc-pe): Add many directories to noconfigdirs
2323 for powerpc-pe native.
2324 (target==i386-win32): add tcl, make to noconfigdirs if canadian cross.
2325 (target==powerpc-pe): duplicate i386-win32 entry.
2329 * configure.in (noconfigdirs): Exclude target-newlib for all versions
2330 of vxworks, not just vxworks5.1.
2334 * mpw-configure: Add support for exec-prefix.
2338 * config.guess: Recognize HP model 816 machines as having
2343 * configure: Ignore new autoconf configure options.
2347 * config/mt-v810 (CC_FOR_TARGET): Add -ansi flag. NEC compiler
2348 defaults to K&R mode, but doesn't have varargs.h, so we have to
2349 compile in ANSI mode.
2353 * config.guess: Recognize Pentium under SCO.
2358 * configure.in (noconfigdirs): Disable target-libio on v810-*-*.
2359 * config/mt-v810 (CC_FOR_TARGET, AS_FOR_TARGET, AR_FOR_TARGET,
2360 RANLIB_FOR_TARGET): Set as appropriate for NEC v810 toolchain.
2364 * configure.in: Don't configure gas for alpha-dec-osf*.
2368 * configure.in: Default to --with-stabs for some targets for which
2369 it makes sense: mips*-*-*, alpha*-*-osf*, i[345]86*-*-sysv4* and
2370 i[345]86*-*-unixware*.
2374 * config-ml.in: Get list of multidirs using gcc --print-multi-lib
2375 rather than basing it on the target. Simplify handling of options
2376 controlling which directories to configure. Remove extraneous
2377 slash in multi-clean target.
2381 * config-ml.in: Prefix more variables with ml_ so they don't collide
2386 * configure: Don't turn -v into --v.
2390 * configure.in (targargs): Fix typo.
2392 * Makefile.in (DEVO_SUPPORT): Add symlink-tree.
2396 * configure.in: Strip --host and --target options from
2397 CONFIG_ARGUMENTS, and always configure for --host only. Add
2398 --with-cross-host option when building with a cross-compiler.
2399 * configure: Canonicalize the arguments put into config.status by
2400 always using `=' for an option with an argument. Pass a presumed
2401 --host or --target explicitly.
2405 * config.sub: Merge -macos*, -magic*, -pe*, and -win32 cases
2406 into general OS recognition case.
2410 * configure.in (target_configdirs): add target-winsup only
2411 for win32 target systems.
2415 * Makefile.in (all-target-libgloss): Depend upon
2416 configure-target-newlib, since when libgloss is built it looks to
2417 see if the newlib directory exists.
2421 * Makefile.in (DEVO_SUPPORT): Use config-ml.in instead of
2426 * configure: Handle LD and LD_FOR_TARGET when configuring a
2431 * config/mh-i386win32: add LD_FOR_TARGET.
2435 * configure.in (target_libs): add target-winsup.
2436 (target==i386-win32): add patch diff flex make to $noconfigdirs.
2437 (target==ppcle-pe): remove ld from $noconfigdirs.
2441 * Makefile.in (CONFIGURE_TARGET_MODULES): Pass --with-target-subdir.
2442 Preserve relative path names in $srcdir. Build symlink tree if
2443 configuring cross target dir and srcdir=. (= no VPATH support).
2444 (configure-target-libg++): Depend on configure-target-librx.
2445 * cfg-ml-com.in, cfg-ml-pos.in: Deleted.
2446 * config-ml.in: New file.
2447 * symlink-tree: New file.
2448 * configure: Ensure srcdir="." if that's what it is.
2452 * mpw-README: Clarify some phrasing, add notes about CodeWarrior
2453 includes and FLEX_SKELETON setting.
2454 * mpw-configure (--with-gnu-ld): New option, controls whether
2455 to use PPCLink or ld with PowerMac GCC.
2456 * mpw-build.in (all-grez, do-grez, install-grez): New targets.
2457 * mpw-config.in: Configure grez if targeting Mac.
2459 * config.sub: Accept pmac and pmac-mpw as names for PowerMacs,
2460 accept mpw and mac-mpw as names for m68k Macs, change macos7 to
2462 * configure.in: Configure grez resource compiler if targeting Mac.
2463 * Makefile.in (all-grez, install-grez): New targets.
2467 * configure: CXX defaults to gcc, not g++. If we find
2468 gcc in the path, set CC to gcc -O2.
2472 * configure: Default ${build} correctly. Avoid picking up extra
2473 spaces when reading CC and CXX from Makefile. When doing a
2474 Canadian Cross, use plausible default values for numerous
2476 * configure.in: When doing a Canadian Cross, don't try to
2477 configure tools whose configure script can't handle it.
2481 * cfg-ml-com.in (sh-*-*): Add m2 and ml/m2 to multidirs.
2485 * configure: Remove dubious bug reporting address.
2489 * Makefile.in ($(CONFIGURE_TARGET_MODULES)): If subdir has
2490 configure script, run that instead of this directory's configure.
2491 In either case, print a message that we're configuring the sub-dir.
2495 * configure.in: Before checking for the existence of various files,
2496 use sed to filter out "target-".
2500 * Makefile.in (DO_X): Split rule to decrease command line length
2502 (Philippe De Muyter).
2506 * Makefile.in (all-patch): depend on all-libiberty.
2510 * configure.in: If the only directory in target_configdirs which
2511 actually exists is libiberty, then set target_configdirs to empty,
2512 to avoid trying to build a target libiberty in a gas or gdb
2517 * configure.in (host_makefile_frag): Use m68k-sun-sunos* instead
2518 of m68k-sun-* when selecting mh-sun3 to avoid matching NetBSD/sun3
2523 * configure.in (copy_dirs): Use sys-include instead of include
2524 for --with-headers option.
2528 * Makefile.in, configure.in: Make winsup builds work with
2533 * configure.in: Build the linker on AIX.
2537 * Makefile.in (CC_FOR_TARGET, CXX_FOR_TARGET): Add $(TARGET_SUBDIR)
2542 * Makefile.in (all-gcc): Fix typo.
2546 * Makefile.in ($(CHECK_TARGET_MODULES)): Fix typo.
2550 * configure.in: Rename libFOO to target-libFOO, and xiberty
2551 to target-xiberty, to provide more flexibility.
2552 (target_subdir): Define. Create if cross.
2553 Set TARGET_SUBDIR in Makefile to ${target_subdir}.
2554 * Makefile.in: Rename all-libFOO -> all-target-libFOO, all-xiberty
2555 -> all-target-libiberty, configure-libFOO -> configure-target-libFOO,
2556 check-libFOO -> check-target-libFOO, etc.
2557 ($(DO_X)): Iterate over TARGET_CONFIGDIRS after SUBDIRS.
2558 ($(CONFIGURE_TARGET_MODULES), $(CHECK_TARGET_MODULES),
2559 $(ALL_TARGET_MODULES), $(INSTALL_TARGET_MODULES)): Update accordingly.
2560 (configure-target-XXX): Depend on $(ALL_GCC), not all-gcc, to
2561 allow ALL_GCC="" to only configure.
2562 (DEVO_SUPPORT): Add cfg-ml-com.in and cfg-ml-pos.in.
2563 (ETC_SUPPORT, ETC_SUPPORT_PFX): Merge; update 'taz' accordingly.
2564 (LIBGXX_SUPPORT_DIRS): Remove xiberty.
2568 * Makefile.in (taz): Build "info" in etc explicitly.
2572 * configure.in: Make sure that CC is undefined (as opposed to
2573 null) if toplevel/config/mh-{host} doesn't define it. Fixes a
2574 problem with autoconf trying to configure on a host without GCC.
2578 * mpw-configure: Set host alias from choice of host compiler,
2579 only use generic MPW Makefile sed if present, edit a file
2580 named "hacked_Makefile.in" instead of "Makefile.in" if present.
2581 * mpw-README: Add problem notes about CW6 and CW7.
2585 * Makefile.in (taz): Use ";" instead of ";;".
2589 * Makefile.in (taz): Grep for '^diststuff:' or '^info:' in
2590 sub-directory Makefiles, instead of using DISTSTUFFDIRS and
2592 (DISTSTUFFDIRS, DISTDOCDIRS): Removed - no longer used.
2593 (newlib.tar.gz): Don't pass DISTDOCDIRS to recursive make.
2597 * Makefile.in (DISTDOCDIRS): Remove ld gprof bnutils gas libg++ gdb
2598 and gnats, because they are now subsumed by DISTSTUFFDIRS.
2599 Move bfd to DISTSTUFFDIRS.
2603 * Makefile.in (X11_LIB): Removed.
2604 (X11_FLAGS_TO_PASS): pass only X11_EXTRA_CFLAGS and X11_EXTRA_LIBS.
2606 * configure.in (host_makefile_frag): mh-aix & mh-sun removed.
2610 * cfg-ml-com.in (powerpc*): Shorten some of the multilib directory
2615 * cfg-ml-com.in (powerpc*-eabi*): Add mcall-aixdesc varients.
2619 * configure.in (i[345]86-*-win32): Always build newlib.
2620 Don't configure cvs, autoconf or texinfo.
2621 * Makefile.in (LD_FOR_TARGET): New.
2622 (BASE_FLAGS_TO_PASS, EXTRA_TARGET_FLAGS, CONFIGURE_TARGET_MODULES):
2623 Pass down LD_FOR_TARGET.
2627 * winsup: New directory.
2628 * Makefile.in: Build winsup.
2629 * configure.in: Winsup is configured when target is win32.
2630 Can only build win32 target GDB when native.
2634 * config.guess: Recognize HP model 819 machines as having
2639 * configure: Fix sed loop which substitutes for CC and CXX to
2640 avoid bug found in various sed implementations.
2644 * cfg-ml-com.in (powerpc-*-eabisim): Delete separate rule for
2645 simulator. Use standard powerpc-*-eabi*.
2649 * configure.in: Stop putting gas and binutils in noconfigdirs for
2650 powerpc-*-aix* and rs6000-*-*.
2654 * cfg-ml-com.in (powerpc*-*-eabisim*): Add support for building
2655 -mcall-aixdesc libraries.
2661 * config.sub (arm | armel | armeb): Fix shell syntax.
2665 * cfg-ml-com.in ({powerpc,rs6000}-ibm-aix*): Add multilibs for
2666 -msoft-float and -mcpu=common support.
2667 (powerpc*-*-eabisim*): Add support for building -mcall-aix
2672 * configure.in: Allow configuration and build of emacs19 for the alpha.
2676 * configure.in (CC): Get ^CC, not just any old CC, from
2677 ${host_makefile_frag}.
2681 * configure.in (CC): Try to get CC from
2682 ${srcdir}/${host_makefile_frag}, not ${host_makefile_frag}.
2686 * Makefile.in (TARGET_CONFIGDIRS): configure targetdirs
2687 only if it exists in $(srcdir).
2691 * configure: If CC and CXX are not set in the environment, set
2692 them, based on either an existing Makefile or on searching for gcc
2693 in PATH. Substitute for CC and CXX in Makefile.
2694 * configure.in: Remove libm from target_libs. Separate
2695 target_configdirs from configdirs. If CC is not set in
2696 environment, try to get it from a host Makefile fragment. Rewrite
2697 changes of configdirs to use skipdirs instead. A few minor
2698 tweaks. Take directories out of target_configdirs as they are
2699 taken out of configdirs. Remove existing Makefile files from
2700 subdirectories. Substitute for TARGET_CONFIGDIRS and
2701 CONFIG_ARGUMENTS in Makefile.
2702 * Makefile.in (TARGET_CONFIGDIRS): New variable, automatically set
2704 (CONFIG_ARGUMENTS): Likewise.
2705 (CONFIGURE_TARGET_MODULES): New variable.
2706 ($(DO_X)): Loop over TARGET_CONFIGDIRS as well as SUBDIRS.
2707 ($(CONFIGURE_TARGET_MODULES)): New target.
2708 (configure-libg++, configure-libio): New targets.
2709 (all-libg++): Depend upon configure-libg++.
2710 (all-libio): Depend upon configure-libio.
2711 (configure-libgloss, all-libgloss): New targets.
2712 (configure-libstdc++): New target.
2713 (all-libstdc++): Depend upon configure-libstdc++.
2714 (configure-librx, all-librx): New targets.
2715 (configure-newlib): New target.
2716 (all-newlib): Depend upon configure-newlib
2717 (configure-xiberty): New target.
2718 (all-xiberty): Depend upon configure-xiberty.
2722 * configure.in (host i[345]86-*-win32): Expand the
2727 * mpw-configure: Fix sed command file name.
2731 * configure.in (host i[345]86-*-win32): Reduce the
2736 * configure.in: Don't configure ld and gdb for powerpc*-*-winnt*
2737 or powerpc*-*-pe*, since they are not yet supported.
2741 Add PowerMac support and many other enhancements.
2742 * mpw-configure: New option --cc to select compiler to use,
2743 paste options set according to --cc into the generated
2744 Makefile, generate the Makefile by sed'ing the Unix Makefile.in
2745 if mpw-make.sed is present.
2746 * mpw-config.in: Don't test for gC1, test for mpw-touch,
2747 add forward includes for PowerPC include files.
2748 * mpw-build.in: Build using Makefile.PPC if present.
2749 (do-byacc, etc): Remove separate version resource builds.
2750 (do-gas): Build "stamps" before "all".
2751 (do-gcc): Build "stamps-h" and "stamps-c" before "all".
2752 * mpw-README: Update to reflect --cc option, PowerMac support,
2753 and recently-reported compatibility problems.
2757 * cfg-ml-com.in (m68*-*-*): Only build multilibs for
2758 embedded m68k systems (-aout, -coff, -elf, -vxworks).
2759 (--with-multilib-top): Pass to recursive invocations.
2763 * configure.in (noconfigdirs): Disable libg++ and libstdc++ on
2768 * configure.in (noconfigdirs): Disable bfd, binutils, gas, gcc,
2769 gdb, ld and opcodes on v810-*-*.
2773 * config/mh-ncrsvr43: Removed AR_FLAGS
2777 * Makefile.in (DO_X): Change do-realclean to do-maintainer-clean.
2778 (local-maintainer-clean): New target.
2779 (maintainer-clean): New target.
2780 (realclean): Just depend upon maintainer-clean.
2784 * configure.in (noconfigdirs): Disable gdb on m68k-*-netbsd*.
2788 * configure.in: Build ld in mips*-*-bsd* case.
2792 * config.sub: Accept -lites* OS. From Ian Dall.
2796 * config.sub: recognise mips64vr4300 and mips64vr4300el as valid
2801 * configure.in: treat i386-win32 canadian cross the same as
2802 i386-go32 canadian cross.
2806 * cfg-ml-com.in (powerpc*-*-eabisim): Add support for PowerPC
2807 running under the simulator to build a reduced set of libraries.
2808 (powerpc-*-eabiaix): Add fine grained multilib support added to
2809 other powerpc targets yesterday.
2813 * cfg-ml-com.in (powerpc*): Add support for -disable-biendian,
2814 -disable-softfloat, -disable-relocatable, -disable-aix, and
2815 -disable-sysv to control which multilib libraries get built.
2819 * configure: Add Makefile.tem to list of files to remove in trap
2824 * config.guess (*Linux*): Add missing "exit"s.
2825 Also, need specific check for alpha-unknown-linux (uses COFF).
2829 * config.guess: Merge with FSF:
2832 * config.guess (AIX4): More robust release numbering discovery.
2835 * config.guess (i386-sequent-ptx): Properly get version number.
2838 * config.guess (mips:*:4*:UMIPS): New case.
2842 * configure.in (i386-go32 host): Fix typo (deja-gnu -> dejagnu).
2843 (i386-win32 host): Likewise. Don't build readline.
2845 start-sanitize-gdbtk
2848 * Makefile.in (GDBTK_SUPPORT_DIRS): Define and pass as part of
2849 SUPPORT_FILES to submakes.
2854 * Makefile.in (GDB_SUPPORT_DIRS): Add utils.
2855 (DEVO_SUPPORT): Add mpw-README, mpw-build.in, mpw-config.h and
2860 * configure.in (appdirs): Use =, not ==, in test expression when
2861 trying to build the text to print in the warning message for
2866 * cfg-ml-com.in (z8k-*-coff): Add 'std' multilib build.
2870 * config.guess: Recognize lynx-2.3.
2874 * config.sub (z8ksim): Deleted
2875 (z8k-*-coff): New, this is the one true name of the target.
2879 * cfg-ml-pos.in (dotdot): Work around SunOS sed bug.
2883 * config.guess (*:Linux:*:*): First try asking the linker what the
2884 default object file format is (elf, aout, or coff). Then if this
2885 fails, try previous methods.
2889 * configure.in: Don't build newlib for *-*-vxworks5.1.
2893 * configure.in: Don't build newlib for a29k-*-vxworks5.1.
2894 * test-build.mk: Add setting of --with-headers for a29k-vxworks5.1.
2898 * cfg-ml-pos.in (MULTITOP): Trim excess trailing "/.".
2902 * cfg-ml-com.in: New file.
2903 * cfg-ml-pos.in: New file.
2907 * COPYING.NEWLIB: Add HP free copyright to list.
2911 * config.sub: Recognize -eabi* for the system, not just -eabi.
2915 * Makfile.in (DLLTOOL_FOR_TARGET): New name, pass it down.
2916 * config.sub, configure.in (win32): New target and host.
2920 * configure.in: Add i386-pe configuration.
2924 * mpw-build.in (install): Install GDB after LD.
2928 * mpw-config.in (elf/mips.h): Always forward-include, needed
2933 * testsuite: New directory for customer acceptance and whole tool
2938 * configure: If per-host line isn't found, but AC_OUTPUT is found
2939 and a configure script exists, run it instead.
2943 * config.guess: Update from FSF, for alpha-dec-winnt3.5 and Crays.
2947 * configure: Set build_{cpu,vendor,os,alias} to host values when
2948 --build isn't specified.
2952 * Makefile.in (PICFLAG, PICFLAG_FOR_TARGET): New macros.
2953 (FLAGS_TO_PASS): Pass them.
2954 (EXTRA_TARGET_FLAGS): Ditto.
2956 * config/m?-*pic: Define PICFLAG* instead of LIB*FLAGS*.
2960 * Makefile.in (all-libg++): Depend on all-libstdc++.
2964 * configure.in (noconfigdirs): Enable all packages for
2965 i386-unknown-netbsd.
2969 * configure.in (noconfigdirs): Don't configure tk for i386-go32
2970 hosted builds (DOS builds)
2974 Changes for ARM based on patches from Richard Earnshaw:
2975 * config.sub: Handle armeb and armel.
2976 * configure.in: Omit arm linker only for riscix.
2980 * config.guess: Update from FSF.
2984 * config.sub: Recognize powerpcle as the little endian varient of
2985 the PowerPC. Recgonize ppc as a PowerPC variant, and ppcle as a
2986 powerpcle variant. Convert pentium into i586, not i486. Add p5
2987 alias for i586. Map new x86 variants p6, k5, nexgen into i586
2992 * configure.in (hppa*-*-lites*): Treat like hppa*-*-*elf*.
2996 * config.sub: Accept -lites* as a basic system type.
3000 * config.guess (*:Linux:*:*): Check for whether the pre-BFD linker is
3001 installed, and if so return linuxoldld as the system name.
3005 * config.guess: Add hppa1.1-hp-lites support.
3009 * configure.in: Don't build newlib for m68k-vxworks5.1.
3013 * configure.in (mips-sgi-irix6): Use mh-irix5.
3017 * Makefile.in (all-gcc): Depend on all-ld (for libgcc1-test).
3021 * test-build.mk: Enable building of shared libraries on IRIX 5 and
3022 OSF/1. Fix compiler flags.
3023 * build-all.mk: Support Linux and OSF/1 3.0. Fix compiler flags.
3027 * configure.in: Recognize --with-newlib.
3028 (sparc-*-sunos4*): Build sim, dejagnu, expect, tcl if cross target.
3030 start-sanitize-gdbtk
3033 * Makefile.in: move {all,check,install}-gdb from *_MODULES
3034 to *_X11_MODULES due to gdbtk needing X include files et al.
3039 Merge in support for Mac MPW as a host.
3040 (Old change descriptions retained for informational value.)
3042 * mpw-config.in: Add generic include forwards for cpu-specific
3043 include files in aout and elf directories.
3045 * mpw-configure: Added copyright.
3046 * mpw-config.in: Check for presence of required build tools.
3047 (target_libs): Add newlib.
3048 (target_tools): Add examples.
3049 (Read Me): Generate as "Read Me for MPW" instead.
3050 * mpw-build.in: Base sub-builds on all-foo instead of do-foo.
3051 (all-byacc, do-byacc, all-flex, do-flex, do-newlib): New actions.
3052 (do-gas, do-gcc, do-gdb, do-ld): Build Version.r first.
3054 * mpw-configure: Remove subdir-specific makefile hackery,
3055 delete mk.tmp after using it.
3057 * mpw-build.in (all): Display start and end times.
3059 * mpw-configure (host_canonical): Set.
3060 (target_cpu): Always add to makefiles.
3061 (ARCHDEFS, EMUL): Add to makefile only if nonempty.
3062 (TM_FILE, XM_FILE, NM_FILE): No longer add to makefile.
3063 (mpw-mh-mpw): Look for in srcdir and srcroot.
3064 Use sed instead of mpw-edit-prefix to edit prefix definitions.
3066 * mpw-build.in: (install-only): New target.
3068 * mpw-configure (host_alias, target_alias): Rename from hostalias
3069 and targetalias, add into generated Makefile.
3070 (mk.tmp): If present, add into generated Makefile.
3071 * mpw-build.in (all-gas): Build config.h first before gas proper.
3073 * mpw-configure (config.status): Write only if changed.
3074 * mpw-config.in (readline): Configure it (not built, just used for
3077 * mpw-config.in (elf/mips.h): Add a forward include.
3079 * mpw-config.in: Forward-include most .h files in include into
3081 (readline): Don't build.
3082 mpw-build.in (install): Install GDB.
3084 * mpw-configure (prefix, mpw_prefix): Handle it.
3085 * mpw-config.in (mmalloc, readline): Don't configure.
3086 * mpw-build.in (thisscript): Rename to ThisScript.
3087 Use mpw-build instead of BuildProgram everywhere.
3088 (mmalloc, readline): Don't build.
3089 * mpw-README: New file, basic documentation about the MPW port.
3091 * mpw-config.in: Use forward-include to create include files.
3093 * mpw-configure: Add more things to the top of each configured
3094 Makefile, including contents of config/mpw-mh-mpw.
3095 * mpw-config.in (extra-include): Create this directory and fill it
3096 with Posix-like include files when configuring.
3098 * config.sub (apple, mac, mpw): Add various aliases.
3100 * mpw-build.in: New file, top-level build script fragment for MPW.
3101 * mpw-configure: New file, configure script for MPW.
3102 * mpw-config.in: New file, config fragment for MPW.
3106 * configure.in (host_libs): Remove glob, since it is gone from the
3111 * Makefile.in: define empty GDB_NLM_DEPS var.
3113 * configure.in(target_makefile_frag): use config/mt-netware
3114 for netware targets.
3118 * config.sub: Merge in recent FSF changes. Remove linux special
3123 build-all.mk,config/mh-solaris: revert these two changes:
3127 * build-all.mk: Use CC=cc -Xs on Solaris.
3129 Mon Mar 29 19:59:26 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3131 * config/mh-solaris: SunPRO C needs -Xs to be able to get a
3132 working xmakefile for Emacs.
3136 * glob/*: Removed. Schauer's 24 Feb 1994 readline change made us
3138 * Makefile.in: Nuke all references to glob subdirectory.
3142 * configure.in: Fix --enable-shared logic in per-host.
3146 * configure.in (*-hp-hpux[78]*): Use mh-hpux8.
3150 * configure.in (noconfigdirs): Don't build gas on AIX, for
3151 powerpc*-*-aix* as well as for rs6000*-*-aix*.
3155 * configure: Fix --cache-file to work if the file argument is a
3160 * configure: If the --cache-file is used, pass it down to
3161 configure in subdirectories.
3165 * config.sub: add vxworks29k configuration.
3169 * Makefile.in (taz): Do "diststuff" part quietly.
3173 * config.sub: Mini-merge with gcc/config.sub.
3177 * config.guess (IRIX): Sed - to _.
3181 * Makefile.in (source-vault, binary-vault): New targets.
3185 * config.sub: Recognize -eabi as a basic system type.
3189 * configure.in (enable_shared stuff): Fix typo.
3193 * Makefile.in (BASE_FLAGS_TO_PASS): Fix typo in passing LIBCXXFLAGS*.
3197 * Makefile.in (LIBCXXFLAGS_FOR_TARGET): Add -fno-implicit-templates.
3201 * configure.in (rs6000-*-*): Don't build gas.
3205 * Makefile.in: Use /x/x/ instead of /brokensed/brokensed/, to
3206 reduce command line length.
3207 (AS_FOR_TARGET): Check for as.new, not Makefile.
3208 (NM_FOR_TARGET): Check for nm.new, not Makefile.
3212 * config.guess: Merge from FSF.
3216 * configure: Don't use $ when handling program_suffix.
3220 * configure.in: Configure tk for hppa/hpux.
3224 * Makefile.in (LIBGXX_SUPPORT_DIRS): Add libstdc++.
3228 * Makefile.in: Move -fno-implicit-template from CXXFLAGS
3229 to LIBCXXFLAGS. Tests are better run without it.
3233 * Makefile.in (all-ispell): Depend on all-emacs19 instead of all-emacs.
3237 * configure.in (*-*-netware*): Don't configure xiberty.
3241 * configure.in: Remove tk from native_only list.
3245 * build-all.mk: Add mips-ncd-elf target to sun4 targets
3246 for special NCD build.
3250 * Makefile.in (DEVO_SUPPORT): Remove configure.bat and
3251 makeall.bat, they're only useful for binutils snapshots.
3252 (binutils.tar.gz, gas+binutils.tar.gz): Add configure.bat and
3253 makeall.bat to specified SUPPORT_FILES.
3257 * build-all.mk: Add Ericsson targets to sun4 and solaris
3258 hosts. Add BNR's sun4 target to solaris host, so their
3259 build-from-source will be tested in-house first.
3263 * Makefile.in (LIBCFLAGS): New variable.
3264 (CFLAGS_FOR_TARGET): Ditto.
3265 (LIBCFLAGS_FOR_TARGET): Ditto.
3266 (LIBCXXFLAGS): Ditto.
3267 (CXXFLAGS_FOR_TARGET): Ditto.
3268 (LIBCXXFLAGS_FOR_TARGET): Ditto.
3269 (BASE_FLAGS_TO_PASS): Pass them.
3270 (EXTRA_TARGET_FLAGS): Ditto.
3272 * configure.in, config/m[th]-*pic: Support --enable-shared.
3276 * configure.in (target_libs): Include libstdc++ again.
3277 * config.guess: Update from FSF (for FreeBSD).
3281 * Makefile.in (DEVO_SUPPORT): Include configure.bat and
3283 (DISTDOCDIRS): Add `etc'.
3284 (ETC_SUPPORT_PFX): New variable.
3285 (taz): Include anything from etc starting with a word in
3290 * config.sub: Update for recent FSF changes. Remove obsolete
3291 h8300hds entry. Add -windows* and -osx as basic os. Minor
3296 * configure.in (target_libs): Remove libstdc++ for libg++-2.6.1.
3298 * config.guess: Merge with FSF.
3299 * configure.in: Match on i?86-ncr-sysv4.3, not i?86-ncr-sysv43.
3303 * configure: Since the "trap 0" handler will override the exit
3304 status on many systems, only use it for "exit 1", and make it set
3305 a non-zero exit status; reset it before "exit 0". Also, check
3306 exit status of config.sub, and error out if it failed.
3310 * Makefile.in: (ALL_TARGET_MODULES,INSTALL_TARGET_MODULES) Build
3311 and install libgloss.
3315 * Makefile.in (all-binutils): Depend upon all-byacc.
3317 * configure.in: Don't build emacs on Irix 5.
3321 * configure.in (*-*-netware*): Add libio.
3325 * Makefile.in (ALL_TARGET_MODULES): Add libstdc++.
3326 (CHECK_TARGET_MODULES): Ditto.
3327 (INSTALL_TARGET_MODULES): Ditto.
3328 (TARGET_LIBS): Ditto.
3329 (all-libstdc++): Note dependencies.
3333 * Makefile.in (BINUTILS_SUPPORT_DIRS): Add gas.
3337 * Makefile.in (CXXFLAGS): Use -fno-implicit-templates instead of
3338 -fexternal-templates.
3340 * configure.in (target_libs): Add libstdc++.
3341 (noconfigdirs): Add libstdc++ as appropriate.
3345 * config.guess: Update from FSF.
3349 * configure: Use ${config_shell} when running ${configsub}.
3353 * config.sub: No longer recognize h8300h.
3357 * config.sub: Remove extraneous differences between config.sub and
3362 * Makefile.in (DISTSTUFFDIRS): Add gas.
3366 * COPYING.NEWLIB: New file.
3370 * config.guess (HP-UX): Patch from Harlan Stenn
3375 * config.guess (sun4*:SunOS:*:*): Change '-JL' to '_JL'.
3379 * config.sub: Merge nextstep cleanup from FSF.
3383 * configure.in (arm-*-*): Don't configure ld for this target.
3387 * configure.in (*-*-netware): don't configure libg++, libio,
3392 * configure.in (alpha-dec-osf*): Use osf*, not osf1*. Don't
3393 configure ld--it works, but it doesn't support shared libraries.
3397 * config.guess (*-unknown-freebsd*): Get rid of possible
3398 trailing "(Release)" in version string.
3403 * config.guess: Fix i486-ncr-sysv43 -> i486-ncr-sysv4.3.
3404 Fix type: *-next-neststep -> *-next-nextstep.
3406 * config.guess: Merge from FSF:
3410 * config.guess: Recognize powerpc-ibm-aix3.2.5.
3414 * config.guess: Recognize UnixWare 1.1 (UNAME_SYSTEM is SYSTEM_V
3415 instead of UNIX_SV for UnixWare 1.0).
3419 * Makefile.in (all-gdb): Add dependencies on all-gcc and all-ld
3420 to make gdb/nlm/* build after the compiler and linker.
3424 * config.guess (netbsd, freebsd, linux): Accept any machine,
3426 (m68k-atari-sysv4): Relocate to match FSF version.
3428 * config.guess: More merges from the FSF:
3430 Add a space before function call or macro invocation.
3434 * config.guess: Add trap cmd to remove dummy.c and dummy when
3439 * config.guess (dummy.c): Redirect stderr for `hostinfo' command.
3440 (dummy): Redirect stderr from compilation of dummy.c.
3444 * config.guess: Distinguish between NeXTStep 2.1 and 3.x.
3448 * configure: Accept and ignore --cache*, for compatibility with
3453 * config.guess: Merge from FSF:
3457 * config.guess (Pyramid*:OSx*:*:*): New case.
3458 (PATH): Add /.attbin at end for finding uname.
3459 (dummy.c): Handle i860-alliant-bsd. Follow whitespace conventions.
3463 * config.guess (M88*:DolphinOS:*:*): New case.
3467 * config.guess (AViiON:dgux:*:*): Use TARGET_BINARY_INTERFACE
3468 to select whether to use ELF or COFF.
3472 * config.guess: Recognize i860-stardent-sysv and i860-unknown-sysv.
3476 * config.guess: Guess the OS version for HPUX.
3480 * config.guess (UNAME_VERSION): Recognize aix3.2.4 and aix3.2.5.
3484 * configure.in: Recognize --with-headers, --with-libs, and
3486 * Makefile.in (all-xiberty): Depend upon all-ld.
3490 * configure.in: Change i[34]86 to i[345]86.
3494 * configure (version): A few more tweaks to help message.
3498 * Makefile.in: Remove (for now) librx as a host library,
3499 now that we're building it for target.
3508 * configure.in: Also configure librx.
3512 * Makefile.in: Update various rules to reflect that librx
3513 is now needed for libg++.
3517 * config.sub: Accept mips64orion and mips64orionel as a CPU name.
3521 * configure.in: Configure the examples directory.
3525 * configure: Simplify Jun 2 1994 change.
3529 * change CC to /usr/latest/bin/gcc for lynx host builds, since
3530 /bin/gcc isn't good enough to build gcc.
3534 * Makefile.in (GDB_SUPPORT_FILES): Remove
3535 (setup-dirs-gdb, gdb.tar.gz, make-gdb.tar.gz): Remove old rules.
3536 (gdb.tar.gz): Add new rule to use standard distribution building
3541 * configure.in: Warn about use of /usr/ucb/cc on Solaris. From
3550 * configure: Search current dir first in .gdbinit.
3554 * config.sub: Recognize freebsd (merged from gcc config.sub).
3558 * config.sub: Refer to NeXT's operating system as nextstep.
3560 * config.sub (case $basic_machine): Re-order the cases, to match
3561 the order in the FSF version (which is mostly alphabethical).
3562 Merge in some additions and changes from the FSF.
3566 * config.guess: Recognize m68k-atari-sysv4 and m88k-harris-csux7.
3567 * config.sub: Recognize cxux7.
3568 * configure.in: Use mh-cxux for m88k-harris-cxux*.
3572 * config.sub: Fix typo powerpc -> powerpc-*.
3576 * Makefile.in: `all-emacs19' depends on `all-byacc'.
3578 * Makefile.in: Add all-emacs19 and install-emacs19 rules (in
3579 parallel with all-emacs and install-emacs). Top-level command
3580 `make all-emacs19 CC=gcc' now behaves as `make all-emacs CC=gcc'.
3584 * test-build.mk ($(host)-stamp-stage2-installed): Remove
3585 $(relbindir)/make before doing ``make install'', and use
3586 $(GNU_MAKE) while doing it. Avoids problem on SunOS with
3587 installing over running make binary.
3588 ($(host)-stamp-stage3-installed): Likewise.
3592 * config.guess: Recognize Mach.
3596 * configure: Check ${exec_prefixoption}, not ${exec_prefix}, to
3597 see whether --exec-prefix was used.
3601 * README: Explicitly mention libg++/README. (Zoo's idea.)
3605 * Makefile.in: Add all-librx target similar to all-libproc.
3609 * config.guess: Rearrange tests for Alpha-OSF1 to properly deal
3610 with post 1.2 uname bogosity.
3614 * configure: Remove temporary files on receipt of a signal.
3618 * configure: If there is a package_makefile_frag, remove
3619 ${subdir}/Makefile.tem after copying it in.
3623 * build_all.mk: support rs6000 lynx identifies itself as
3624 rs6000-lynx-lynxos2.2.2. Also, use /usr/cygnus/progressive/bin/gcc
3625 since /bin/gcc is too feeble to compile a modern gcc.
3629 * brought devo/test-build.mk update-to-date with progressive/
3630 test-build.mk. Add lynx targets and hppa flag info.
3634 * configure.in: Use mh-ncrsvr43. Patch from
3639 * config.guess (i386-unknown-bsdi): No longer need to
3640 check #if defined(__bsdi__) && defined(__i386__).
3644 * configure: Set program_transform_nameoption correctly.
3648 * brought build-all.mk update-to-date with progressive build-all.mk,
3649 added new targets and hppa info.
3653 * configure: If config.guess result is a prefix of the user
3654 specified target, assume a native build and use the user specified
3655 target as the host alias. Remove SunOS patch suffix removal hack.
3656 * configure.in: Remove SunOS patch suffix removal hack.
3658 * Makefile.in (CROSS_CHECK_MODULES): Remove check-flex, since it's
3659 in NATIVE_CHECK_MODULES.
3663 * Makefile.in: Rename HOST_ONLY to NATIVE.
3664 * configure: Delete SunOs patch suffix from host_canonical
3665 and build_canonical variables that are prepended to Makefiles.
3666 * configure.in: Add comments for easier maintenance.
3670 * Makefile.in: Add all-libproc target similar to all-gui.
3674 * Makefile.in (CHECK_MODULES): split into
3675 HOST_ONLY_CHECK_MODULES and CROSS_CHECK_MODULES.
3679 * config.guess (i386-unknown-bsdi): New system to guess.
3683 * Makefile.in: Add all-gui target (but not yet build by "all").
3687 * config.sub: Move deletion of patch suffix from here...
3688 * configure.in: To here, at Ian's suggestion. The top-
3689 level scripts might need to know of a patch level.
3693 * config.sub: Strip off patch suffix so rtl is recognized
3694 as a sunos4.1.3 machine, even though it's been patched.
3698 * Makefile.in (INSTALL_LAST): Delete.
3699 (INSTALL_DOSREL): New.
3703 * configure.in: Use ld for i[34]86-*-sysv4* and sparc-*-solaris2*.
3704 Don't set use_gnu_ld to no for *-*-sysv4; that only controls
3705 whether we pass down --with-gnu-ld anyhow.
3709 * Makefile.in (INSTALL_LAST): Change operation so it works
3710 on more flavors of make.
3711 * configure.in (go32): Don't build libg++ or libio.
3715 * Makefile.in (Move HOST_PREFIX_1 and friends up so
3716 they can be overriden by templates.
3720 * configure.in (target==go32): Don't build gdb.
3721 * dosrel: New directory.
3725 * configure.in (host==go32): Configure dosrel too.
3726 * Makefile.in (INTALL_TARGET): Call INSTALL_LAST last.
3727 (HOST_CC, HOST_PREFIX, HOST_PREFIX_1): Undefine, they should
3728 be set by incoming names or templates.
3729 (INSTALL_LAST): New rule.
3730 * config/mh-go32: New fragment.
3734 * config.sub (sparclitefrw, sparclitefrwcompat): Don't set the os.
3738 * config/mh-lynxrs6k: Renamed from mh-lynxosrs6k, to make it
3739 unique in 8.3 naming schemes.
3740 * configure.in (appdirs): New variable. Currently empty, but will
3741 be used in gas distribution. If nonempty, lists a set of
3742 directories at least one of which must get configured, or top
3743 level configuration is considered to have failed.
3744 (rs6000-*-lynxos*): Use new file name.
3748 Eliminate XTRAFLAGS.
3749 * Makefile.in (CC_FOR_TARGET): If newlib exists, refer to the
3750 newlib include files using -idirafter, and also use -nostdinc.
3751 (CXX_FOR_TARGET): Likewise.
3752 (XTRAFLAGS): Removed.
3753 (BASE_FLAGS_TO_PASS): Remove XTRAFLAGS_FOR_TARGET.
3754 (EXTRA_HOST_FLAGS): Remove XTRAFLAGS.
3755 (EXTRA_TARGET_FLAGS, EXTRA_GCC_FLAGS): Likewise.
3756 ($(DO_X)): Don't pass down XTRAFLAGS.
3760 * configure.in (mips*-dec-bsd*): New target; do build linker.
3761 (mips*-*-bsd*): New target; don't build linker.
3765 * configure.in: support rs6000-*-lynxos* configuration.
3766 support sunos4 as a cross target.
3768 * config.sub: look for lynx*, not lynx since the OS version may
3769 legitimately be part of the name.
3773 * configure.in (i[34]86-*-sco*): Move to be with other i386
3775 (romp-*-*): New target. Skip various binary utilities.
3776 (vax-*-*): New target. Don't build newlib.
3777 (vax-*-vms): Renamed from *-*-vms. Don't build opcodes or newlib.
3781 * configure.in: Only set host_makefile_frag if config
3786 * install.sh: If $dstdir exists, don't check whether each
3791 * test-build.mk (HOLES): Add sleep; used by rcs/src/conf.sh.
3795 * configure.in (*-*-lynxos*): Don't configure newlib for either
3796 native or cross Lynx.
3800 * config.sub (sparc64-elf): Fix os.
3801 (z8k): Remove duplicate.
3805 * Makefile.in (gcc-no-fixedincludes): Touch gcc/include/fixed, not
3806 gcc/stmp-fixproto, to try to prevent fixproto from being run.
3810 * configure: Make file links cleanly even if Lynx fails on
3811 an NFS symlink (at least fail cleanly).
3815 * test-build.mk (CC): For mips-sgi-irix4, change -XNh1500 to
3820 * configure: Unknown options are fatal again.
3824 * configure: Ignore --x-includes and --x-libraries, for Autoconf
3829 * build-all.mk: Add `clean' target.
3833 * config.guess: Add SINIX support.
3834 * configure.in: Add mips-*-sysv4* support.
3838 * build-all.mk: Document all useful targets.
3839 If canonhost is sparc-sun-solaris2.3, change it to sparc-sun-solaris2.
3840 If canonhost is mips-sgi-irix4.0.5H, change it to mips-sgi-irix4.
3844 * configure: Support --silent, --quiet.
3848 * configure: Support --disable-FEATURE.
3852 * config.guess: Recognize NCR running SVR4.3.
3856 * config.guess: Make BSDI generate i386-unknown-bsd386.
3861 * configure.in (powerpc-*-aix*): Treat like rs6000-*-*.
3865 * configure: Make unrecognized options give nonfatal warnings
3866 instead of fatal errors, and pass them to any subdirectory
3867 configures in case they recognize them.
3868 Make --x equivalent to --with-x.
3872 * configure: Add --enable-* options. Clean up usage message and
3877 * Makefile.in (NM_FOR_TARGET): Build tree version is now nm.new.
3881 * configure.in (hppa*-*-*): Enable binutils.
3885 * config.sub: Recognize cisco.
3889 * Makefile.in (CXXFLAGS): Add -fexternal-templates.
3893 * config.guess: about target *-hitachi-hiuxwe2, don't print more
3894 than one configuration name. Add comment.
3898 * config.guess: about target *-hitachi-hiuxwe2, fixed
3899 machine guessing order. [Hitachi's CPU_IS_HP_MC68K
3900 macro is incorrect.]
3904 * Makefile.in (TAGS): Just build TAGS in each subdirectory, rather
3905 than the "make ls" stuff which used to be here.
3909 * config.guess: Recognize i[34]86-unknown-freebsd.
3914 * configure.in (noconfigdirs for alpha): Remove libg++ and libio.
3918 * config.guess: Check for ptx.
3922 * config.sub: Add os9k checking.
3926 * config.guess: Handle OSF1 running on HPPA processors
3930 * configure: If subdir configure fails, print out a message with
3931 subdirectory name, in case subdir's configure code didn't identify
3936 * configure.in: Remove embedded newlines from configdirs.
3937 Avoid mismatches of substrings. Fix matching strings at end
3940 Fri Feb 11 15:33:33 1994 Stu Grossman (grossman at cygnus.com)
3942 * config.guess: Add Lynx/rs6000 config support.
3946 * configure.in (alpha-dec-osf1*, alpha*-*-*): Build gas.
3950 * configure.in (hppa*-*-osf*): Treat this just like most other
3951 PA configurations (eg no binutils or ld).
3952 (hppa*-*-*elf*): These configurations have binutils and ld.
3960 * configure.in (rs6000-*-*): Build gas.
3964 * Makefile.in: Avoid bug in losing hpux sed.
3968 * Makefile.in, test-build.mk: Remove MUNCH_NM; it was only needed
3969 for GDB and GDB has been fixed to not need it.
3971 Mon Jan 31 18:40:55 1994 Stu Grossman (grossman at cygnus.com)
3973 * config/mh-lynxosrs6k: Account for lack of ranlib!
3977 * config.guess: Recognize vax hosts.
3981 * configure (while loop): Don't use "break 2" inside case
3982 statement -- the case statement isn't an enclosing loop.
3986 * config.guess: Clean up NeXT support, to allow nextstep
3987 on Intel machines. Make OS be nextstep.
3991 * config.guess: Add alternate forms for Convex.
3993 Thu Jan 20 16:13:41 1994 Stu Grossman (grossman at cygnus.com)
3995 * configure: Completely rewrite option processing. Take
3996 advantage of pattern-matching to avoid invoking test frequently.
3997 Also clean up host and target defaulting logic.
4001 * Makefile.in: Replace all occurrances of "rootme" with "r" and
4002 "$${rootme}" with "$$r", to increase the likelihood that the do-*
4003 commands (plus user environment) will fit SCO limits.
4007 * configure.in: Don't issue warnings about directories which are
4008 not being configured if -norecursion is set. Correct test for
4009 --with-gnu-as and --with-gnu-ld to not get confused by substring
4012 * configure.in: Don't build gas for alpha-dec-osf1*.
4014 Tue Jan 4 17:10:19 1994 Stu Grossman (grossman at cygnus.com)
4016 * configure: Back out Per's change of 12/19/1993. It changes the
4017 behavior of configure in unexpected and confusing ways.
4019 Also, use different delim char when calculating
4020 program_transform_name so that the name can contain slashes.
4024 * configure.in, config.sub: Add support for VSTa micro-kernel.
4028 * configure.in: Nuke hacks which were used to get a special
4029 version of GAS for HPPA configurations.
4033 * configure: If only ${target_alias} is given, use that
4034 as the default for ${host_alias}.
4035 * configure: Add missing back-slashes before nested quotes.
4039 * Makefile.in (BASE_FLAGS_TO_PASS): add YACC=$(BISON)
4043 * config.guess: Recognize some Tektronix configurations.
4048 * config.sub: Match any flavor of SH.
4052 * configure.in: Don't try to configure newlib for Alpha.
4056 * configure.in: Don't build ld for Irix 5. Don't build gas,
4057 libg++ or libio for any Alpha target.
4059 * configure.in (mips*-sgi-irix5*): New target; use mh-irix5.
4060 * config/mh-irix5. New file for Irix 5.
4064 * Makefile.in (GZIPPROG): Renamed from GZIP, which gzip uses for
4065 default arguments -- so it tried to compress itself.
4069 * configure.in (notsupp): ensure that a space is always at the end
4070 of the configdirs list, since the grep checks for an explicit space
4074 * configure.in (target i386-sysv4.2): don't build ld, since static
4075 versions of many libraries are not available.
4079 * config.guess: Recognize Apollos (using environment variables).
4080 * configure.in: Don't configure ld, binutils, or gprof for Apollo.
4084 * config.guess: Recognize Sony news mips running newsos.
4088 * Makefile.in (all-cygnus, build-cygnus): "fi else" needs to be
4089 "fi ; else" for bash.
4093 * Makefile.in (BASE_FLAGS_TO_PASS): pass SHELL.
4097 * config.sub: accept unixware as an alias for svr4.2.
4098 Fix some inconsistancies with the gcc version.
4102 * Makefile.in (DISTDOCDIRS): Add gdb.
4106 * Makefile.in (DISTDOCDIRS): Add libg++ and libio.
4110 * Makefile.in (taz): Only build "info" in DISTDOCDIRS.
4111 (DISTDOCDIRS): Don't assume libg++ and gdb folks necessarily want
4116 * config.sub: Accept hiux* as an OS name.
4118 * Makefile.in: Change RUNTEST_FLAGS back to RUNTESTFLAGS per
4119 etc/make-stds.texi. The underscore came from gcc, and dje now
4120 agrees that RUNTESTFLAGS is the correct name.
4124 * install.sh: Remove 'set -e'. It makes any conditionals
4125 in the script useless.
4127 * config.guess: Automatically recognize arm-acorn-riscix
4132 * Makefile.in: Change RUNTESTFLAGS to RUNTEST_FLAGS
4136 * Makefile.in (DISTDOCDIRS): New variable.
4137 (taz): Edit local Makefile.in sooner, instead of proto-toplev
4138 Makefile.in later. Build "info" and "dvi" in DISTDOCDIRS.
4142 * configure.in (hppa target): check the source directory for the
4147 * config.sub: Allow -aout* and -elf*.
4151 * configure.in: Don't build ld on i386-solaris2, same as for
4156 * Makefile.in (taz): Add texinfo/lgpl.texinfo (for libg++).
4160 * configure.in: Configure gdb for alpha.
4164 * Makefile.in (CXXFLAGS): Add -O.
4168 * config.guess: added support for DG Aviion
4172 * configure.in: Produce warning message for subdirectories not
4173 configurable for this host/target combination. Don't try to
4174 configure gdb for vms.
4178 * Makefile.in (taz): Replace "byacc" with "bison -y" in the
4179 appropriate files before making "diststuff".
4180 (DISTBISONFILES): New var: list of files to be edited.
4181 (DISTSTUFFDIRS): Add binutils.
4185 * config.sub: also handle mipsel and mips64el (for little endian mips)
4189 * configure.in: Add * to end of all OS names.
4193 * configure.in: Build newlib for LynxOS native.
4197 * config.guess: Add support for delta 88k running SVR3.
4199 * configure.in: Add comment about HP compiler vs. emacs.
4203 * configure.in: don't build ld on solaris2 (not a viable option
4204 due to bugs in getpwnam & getpwuid)
4208 * configure.in: Accept alpha-dec-osf1*, not just -osf1, since
4209 config.guess will produce a full version number.
4213 * configure.in: Build linker and binutils for alpha-dec-osf1.
4217 * Makefile.in: Remove -O from CXXFLAGS for consistency with CFLAGS,
4218 and gdb/testsuite/Makefile.in.
4222 * configure.in: recognize mips*- instead of mips-
4226 * config.sub: Accept linux*coff and linux*elf as operating
4231 * config.sub: Recognize mips64, and mips3 as an alias for it.
4235 * configure.in: Remove alpha-dec-osf*, no longer necessary now that
4236 gdb knows how to handle OSF/1 shared libraries.
4240 * configure.in: Recognize hppa*-*-hiux* (currently synonym for hpux).
4241 * config.guess: Recognize Hitachi's HIUX.
4242 * config.sub: Recognize h3050r* and hppahitachi.
4243 Remove redundant cases for hp9k[23]*.
4247 * configure.in: default to '--with-gnu-as' and '--with-gnu-ld'
4248 if gas and ld are in the source tree and are in ${configdirs}.
4249 If ${use_gnu_as} or ${use_gnu_ld} are 'no', then don't set the
4250 the --with options (but still pass them down on the command line,
4251 if they were explicitly specified).
4255 * configure: substitute SHELL value in Makefile.in with
4260 * configure.in: Build gas, ld, and binutils for *-*-sysv4* and
4261 *-*-solaris2* targets.
4265 * Makefile.in: define M4, and pass it down to sub-makes;
4266 all-autoconf now depends on all-m4
4270 * Makefile.in ({AR,RANLIB}_FOR_TARGET): make contingent on
4271 presence of {ar,ranlib} instead of a configured directory
4275 * config.guess: Accept 34?? as well as 33?? for NCR.
4279 * configure.in: grab mt-hppa for HPPA targets; use 'gas ' instead
4280 of 'gas' in sed commands, since 'gash' is now in the tree as well.
4284 * configure: grab values for $(CC) and $(CXX) from the
4285 environment, so that someone can do "CC=gcc configure; make" and
4286 have it work right (matching the way that autoconf works now)
4288 * configure.in, Makefile.in: add support for gash, the tcl
4291 * config.guess: add NetBSD variants (hp300, x86)
4295 * install.sh: Support -d option (in the manner of SunOS 4 install,
4296 as it is more deterministic than that of GNU install)
4297 (chmodcmd): Set file to mode 755 by default (should also do default
4298 chgrp and chown, but I don't feel like dealing with that now)
4302 * config.sub: Remove h8300hhms alias.
4306 * configure.in: Match *-*-solaris2* not *-sun-solaris2*.
4310 * Makefile.in (gcc-no-fixedincludes): touch stmp-fixproto as well
4315 * config.sub: recognize m88110-bug-coff.
4319 * Makefile.in (all-libio): all dependencies on the toolchain used
4320 to build this (gcc, gas, ld, etc)
4324 * config.guess: Deal with OSF/1 1.3 on alpha.
4328 * install.sh: add some 'else true' clauses for portability
4330 * configure.in: don't build libio for h8[35]00-*-* targets
4334 * Makefile.in: Add support for new libio.
4338 * install.sh: If one command fails, don't try the rest. Don't try
4339 to remove $dsttmp (via trap) unless we have already created it.
4340 If $src doesn't exist, detect it and exit with an error.
4342 * config.guess: Recognize BSD on hp300.
4346 * config.guess: Map (9000/[34]??:HP-UX:*:*) to m68k-hp-hpux.
4351 * Makefile.in (all-send-pr): depends on all-prms
4355 * config.guess: Fix typo (9000/8??:4.3bsd -> 9000/7??:4.3bsd).
4360 Added test for mips-mips-riscos5.
4364 * configure.in: use mh-hp300 for 68k HP hosts
4368 * configure: add support for CONFIG_SHELL, so that you can use
4369 some alternate shell for evaluating configure scripts
4373 * Makefile.in (make-gdb.tar.gz): Sed bug reporting address
4375 distribution archive.
4376 * Makefile.in (COMPRESS): Remove def.
4377 * Makefile.in (gdb.tar.gz, make-gdb.tar.gz): Renamed from
4378 gdb.tar.Z and make-gdb.tar.Z respectively.
4379 * Makefile.in (make-gdb.tar.gz): Now only build gzip'd archive.
4380 * Makefile.in (make-gdb.tar.gz): Minor changes to move closer
4381 to convergence with 'taz' target in Makefile.in.
4385 * install.sh (dsttmp): use trap to ensure that tmp files go
4386 away on error conditions
4390 * Makefile.in (BASE_FLAGS_TO_PASS): remove LOADLIBES
4394 * Makefile.in (install-dirs): Deal with a prefix like /gnu;
4395 its parent is '/' not ''.
4397 * Makefile.in (DEVO_SUPPORT): Add comments about ChangeLog.
4401 * configure: if ${newsrcdir}/configure doesn't exist, don't assume
4402 that ${newsrcdir}/configure.in does.
4406 * test-build.mk: support for CONFIG_SHELL
4410 * config.sub (netware): Add as a basic system type.
4414 * Makefile.in (Makefile): depend on configure.in. Also drop the
4415 $(srcdir)/ from the dependency on Makefile.in.
4419 * config.sub: Recognize h8300hhms as h8300h-hitachi-hms.
4420 (h8300hhms is temporary until multi-libraries are implemented).
4421 * configure.in: Handle h8300h too.
4425 * config.guess: Recognize dpx/2 as m68k-bull-sysv3.
4429 * configure: Remove extraneous output when guessing host type.
4430 * config.guess: Remove extraneous output when guessing using C
4431 compiler rather than uname, or when guessing fails.
4433 Wed Jul 7 17:58:14 1993 david d `zoo' zuhn (zoo at rtl.cygnus.com)
4435 * Makefile.in: remove all.cross and install.cross targets
4437 * configure: remove CROSS=-DCROSS_COMPILE and ALL=all.cross
4442 * configure.in (target sh): Build gprof.
4444 Thu Jul 1 16:52:56 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4446 * config.sub: change -solaris to -solaris2
4450 * configure.in: Use config/mh-riscos for mips-*-sysv*.
4454 * configure: Correct error message for missing Makefile.in to
4455 print correct directory.
4457 Tue Jun 29 13:52:16 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4459 * install.sh: kludge around 386BSD shell bug
4463 * config.guess: Recognize NeXT.
4464 * config.guess: Recognize i486-ncr-sysv4.
4465 * Makefile.in (taz): rm $(TOOL)-$$VER before linking.
4469 * Makefile.in (MAKEINFOFLAGS): New variable.
4470 (FLAGS_TO_PASS): Pass MAKEINFO as MAKEINFO MAKEINFOFLAGS.
4471 * build-all.mk, test-build.mk: Pass down --no-split as
4472 MAKEINFOFLAGS when hosted on DOS. Compile DOS hosted without -g.
4476 * Makefile.in (DEVO_SUPPORT): Add COPYING COPYING.LIB install.sh.
4480 * Makefile.in (libg++.tar.z): New rule.
4481 * Makefile.in (taz): Replace 'configure -rm' by 'make distclean'.
4482 * Makefile.in (taz): Only do a single chmod.
4484 Fri Jun 18 12:03:10 1993 david d `zoo' zuhn (zoo at majipoor.cygnus.com)
4486 * install.sh: don't use dirname anymore (replaced with sed usage)
4490 * Makefile.in: Change extension for gzip'd files from '.z' to
4491 '.gz' per new FSF standard usage.
4493 Thu Jun 17 16:58:50 1993 david d `zoo' zuhn (zoo at majipoor.cygnus.com)
4495 * configure: put quotes around the final value of program_transform_name
4497 Tue Jun 15 16:48:51 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4499 * Makefile.in: new install.sh support; update install-info rules
4503 * configure.in: Build diff for crosses, but not for go32 host.
4505 * configure.in: Build gprof only for native, and don't build it
4506 for mips-*-*, rs6000-*-*, or i[34]86-*-sco*.
4508 Mon Jun 7 13:12:11 1993 david d `zoo' zuhn (zoo at deneb.cygnus.com)
4510 * configure.in: don't build gas,ld,binutils on for *-*-sysv4
4514 * configure.in (host_tools): Add prms.
4516 Fri Jun 4 13:30:42 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4518 * Makefile.in: install gcc, do installation of $(INSTALL_MODULES)
4519 with $(FLAGS_TO_PASS) on the command line
4521 * config.sub: Recognize lynx and lynxos
4525 * config.sub: Accept -ecoff*, not just -ecoff.
4529 * Makefile.in (taz): Use .gz suffix instead of .z.
4530 (binutils.tar.gz, gas+binutils.tar.gz, gas.tar.gz): Fixed target
4533 Thu Jun 3 00:27:06 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4535 * Makefile.in (vault-install): add an 'else true' (for Ultrix)
4537 Wed Jun 2 18:19:16 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4539 * Makefile.in (install-no-fixedincludes): install gcc last, so
4540 that rebuilds that might happen during 'make install' don't get
4541 bogus gcc include files
4545 Change from Utah for HPPA support:
4546 * config.guess: Recognize hppa1.x-hp-bsd.
4550 * config.guess: Add support for Motorola Delta 68k, up to r3v7.
4553 Tue Jun 1 17:48:42 1993 Rob Savoye (rob at darkstar.cygnus.com)
4555 * config.sub: Add support for rom68k and bug boot monitors.
4559 * Makefile.in: Make all-opcodes depend on all-bfd.
4563 * config.guess: Added special check for i[34]86-univel-sysv4*.
4567 * config.guess: For i[34]86-unknown-sysv4 use UNAME_MACHINE for
4568 the processor rather than assuming i486.
4572 * config.guess: Recognize SunOS6 as Solaris3.
4576 * config.guess: Fix typo. Avoid #elif (not in K&R 1).
4577 Recognize SunOS 5.* only (and not [6-9].*) as being Solaris2.
4581 * build-all.mk (all-cross): New target for Canadian Cross.
4582 Added Q2 go32 targets.
4583 * test-build.mk: Configure go32 cross sparclite-aout and
4584 mips-idt-ecoff -with-gnu-ld. Moved build binary directory from
4585 PARTIAL_HOLE_DIRS to BUILD_HOLES_DIRS.
4587 Mon May 24 15:30:06 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4589 * configure.in: fix Alpha GDB typo; also, don't build DejaGnu for
4590 GO32 hosted toolchains
4592 Mon May 24 14:18:41 1993 Rob Savoye (rob at darkstar.cygnus.com)
4594 * configure: change so "-exec-prefix" gets passed down rather
4595 than "-exec_prefix" so autoconf generated Makefiles get the
4596 exec_prefix set right.
4598 Fri May 21 10:42:25 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4600 * config.guess: get the Solaris2 minor version number
4602 * Makefile.in: add standards.texi and make-stds.texi to ETC_SUPPORT
4606 * config.guess: Recognize some Sequent platforms.
4608 Thu May 20 14:33:48 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4610 * Makefile.in: added the vault-install target
4612 * configure.in: actually use the Sun3 makefile fragment that's in
4613 config, also added the release dir to configdirs
4617 * Makefile.in (taz): Fix modes on stuff in $(TOOL) dir also.
4619 Tue May 18 20:26:41 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4621 * configure.in: remove some program from Alpha targetted toolchains
4625 * Makefile.in (DISTSTUFFDIRS): Renamed from PROTODIRS. Add ld and
4627 (taz): Run "make diststuff" in those directories instead of "make
4628 proto-dir". Look for "VERSION=" only at start of line in subdir
4629 Makefile. Use "gzip -9" for compression.
4630 (TEXINFO_SUPPORT, DIST_SUPPORT, BINUTILS_SUPPORT_DIRS): New vars.
4631 (binutils.tar.z): New target.
4635 * Makefile.in (taz): Include gpl.texinfo.
4639 * Makefile.in (setup-dirs): Merged into "taz" target.
4640 (taz): Only do `proto-dir' stuff if a directory is actually needed
4645 * Makefile.in (MUNCH_NM): New variable, defined to be $(NM).
4646 (FLAGS_TO_PASS): Pass down MUNCH_NM.
4647 (HOST_CC, HOST_PREFIX, HOST_PREFIX_1): New variables.
4648 (EXTRA_GCC_FLAGS): Pass down HOST_* variables.
4649 (gcc-no-fixedincludes): Correct for current gcc Makefile.
4653 * Makefile.in (make-gdb.tar.Z): Add configure, config.guess,
4654 config.sub, and move-if-change to gdb testsuite distribution
4655 archive, so the testsuite can be extracted, configured, and
4656 run separately from the gdb distribution. Blow away the Chill
4657 tests that require a Chill compiled executable, since GNU Chill
4658 is not yet publically available.
4660 Mon May 10 17:22:26 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4662 * test-build.mk: set environment variables in a single command,
4663 instead of a list of assignments and exports
4665 * config.guess: recognize Alpha/OSF1 systems
4669 * configure: Change help message to prefer --options rather than
4674 * config.sub: Convergent Tech. "miniframe" uses m68010, sez
4676 * config.guess: Recognize miniframe.
4678 Sun May 9 17:47:57 1993 Rob Savoye (rob at darkstar.cygnus.com)
4680 * Makefile.in: Use srcroot to find runtest rather than rootme.
4681 Pass RUNTESTFLAGS and EXPECT down in BASE_FLAGS_TO_PASS.
4685 * test-build.mk: Extensive additions to support building on a
4686 machine other than the host.
4690 * configure (tooldir): Fix for i386-aix again.
4694 * configure, Makefile.in: Change definition of $(tooldir)
4699 * config.guess: Recognize i[34]86/SVR4.
4703 * Makefile.in (all-gdb): gdb depends on sim.
4707 * Makefile.in (gdb.tar.Z): Make prototype gdb testsuite directory
4708 at the same time we make the prototype gdb directory.
4709 * Makefile.in (make-gdb.tar.Z): Make the testsuite distribution
4710 files at the same time as the gdb base release distribution.
4714 * Makefile.in (check): Use individual check targets rather than
4720 * config.sub: Use sysv3.2 not sysv32 for canonical OS
4721 for System V release 3.2.
4725 * config.sub: Recognize hppaosf.
4726 * configure.in: Do configure ld/binutils/gas for it.
4730 * configure (tooldir): Alter syntax used to set this, for systems
4731 where "\$" isn't handled right, like i386-aix.
4735 * configure: Pass program-transform-name, not
4736 program_transform_name, to recursive configures.
4740 * Makefile.in (gas+binutils.tar.z): New rule for building snapshots
4745 * config.guess: Recognize AIX3.2 as distinct from 3.1.
4747 Sat Apr 17 17:19:50 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4749 * configure.in: rename m88k-motorola-m88kbcs to m88k-motorola-sysv
4751 * config/mh-delta88: remove extraneous GCC references
4755 * Makefile.in (PRMS): Set back to all-prms.
4759 * test-build.mk: Pass -with-gnu-as for known MIPS native and MIPS
4760 targets, rather than for MIPS hosts.
4762 Fri Apr 9 13:51:06 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4764 * configure.in: add comment for --with-x default values
4766 * config.guess: handle Motorola Delta88 box for SVR3 and SVR4.
4768 * Makefile.in: add check-* targets for each of the directories in
4769 the tree. Add a definition of RUNTEST that will use the one we
4770 just built, if it exists. Pass this down via FLAGS_TO_PASS.
4774 * configure.in: Removed obsolete references to bfd_target and
4775 target_makefile_frag.
4777 * build-all.mk: Set assorted targets for Q2.
4778 * config.sub: Recognize z8k-sim and h8300-hms.
4779 * test-build.mk: Really don't pass host to configure.
4780 (HOLES): Added uname.
4784 * configure: Handle an empty program-prefix, program-suffix or
4785 program-transform-name correctly.
4789 * build-all.mk: -G 8 no longer required for MIPS targets.
4790 * test-build.mk: Don't pass host argument to configure; make it
4795 * Makefile.in (gdb.tar.Z): Fix for building gzip'd distribution.
4796 * Makefile.in (COMPRESS): New macro, like GZIP.
4800 * test-build.mk: Use -with-gnu-as for mips-sgi-irix4 as well.
4802 * build-all.mk: Set GCC to gcc -O -G 8 for MIPS targets, since gcc
4803 with gas currently defaults to -G 0.
4807 * Makefile.in (all-flex): flex depends on byacc.
4809 * build-all.mk: If host not specified, use config.guess. Pass TAG
4810 to test-build.mk as RELEASE_TAG.
4811 * test-build.mk (configargs): New variable containing arguments to
4812 pass to configure. Set to -with-gnu-as on mips-dec-ultrix.
4813 (FLAGS_TO_PASS): Pass down RELEASE_TAG.
4815 * config.guess: Use /bin/uname when checking -X argument on SCO,
4816 to avoid invoking GNU uname which doesn't understand -X.
4818 * test-build.mk: Don't use /usr/unsupported/bin/as on AIX.
4820 * configure.in: Build gas for mips-*-*.
4824 * Makefile.in (all.normal): insert missing backslash.
4828 * build-all.mk, config/mh-irix4: Bump -XNh value to 1500 to match
4831 * Makefile.in: Complete overhaul to merge many almost identical
4836 * Makefile.in (setup-dirs-gdb): Renamed from setup-dirs.
4837 (gdb.tar.Z): Adjusted.
4839 * Makefile.in (setup-dirs, taz): New targets; should be general
4840 enough to adapt for gdb sometime. Build only .z file.
4841 (gas.tar.z): New target.
4845 * build-all.mk: Use CC=cc -Xs on Solaris.
4847 Mon Mar 29 19:59:26 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4849 * config/mh-sun3: cc needs -J to compile cp-parse.c correctly
4851 * config/mh-solaris: SunPRO C needs -Xs to be able to get a
4852 working xmakefile for Emacs.
4857 for handling BISON for FSF releases.
4861 * configure: Actually implement the change zoo just documented.
4863 Wed Mar 24 13:02:44 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
4865 * configure: when using config.guess, only set target_alias when
4866 it's not already been set (ie, on the command line)
4868 Mon Mar 22 23:07:39 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4870 * Makefile.in: add installcheck target, set PRMS to install-prms
4872 Sun Mar 21 16:46:12 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4874 * configure: add support for package_makefile_fragment, handle the
4875 case where a directory has a configure.in file but no Makefile.in
4876 more gracefully (with an actual understandable error message, even);
4877 add support for --without (and add this to the usage message); also
4878 explicitly add a --host=${host_alias} to the command line when
4879 config.guess is used
4883 * configure: Must use both --host and --target in recursive calls.
4887 * Makefile.in: Change deja-gnu to dejagnu.
4891 * configure.in (h8300-*-*, h8500-*-*): Don't build libg++.
4893 Fri Mar 12 18:30:14 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4895 * configure.in: canonicalize all instances to *-*-solaris2*,
4896 also strip out a number of tools to not build for go32 host
4900 * config.guess: add GPL.
4902 * Makefile.in, config.guess, config.sub, configure: bump
4907 * Makefile.in (do-info): Removed obsolete check for existence of
4910 * Makefile.in (MAKEOVERRIDES): Define to be empty.
4912 Wed Mar 10 03:11:56 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4914 * Makefile.in: a couple of 'else true' for decstation,
4917 * configure.in: configure tclX too; don't remove Tk on RS/6000 anymore
4921 * Makefile.in (setup-dirs): change invocation of make to $(MAKE).
4923 Mon Mar 8 14:52:11 1993 Ken Raeburn (raeburn@cambridge)
4925 * config.guess: Recognize i386-ibm-aix (PS/2).
4926 * configure.in: Use config/mh-aix386 file for it.
4930 * Makefile.in (GCC_FOR_TARGET): Eliminated definition; use
4931 CC_FOR_TARGET instead.
4932 (BASE_FLAGS_TO_PASS): Pass GCC_FOR_TARGET=$(CC_FOR_TARGET).
4936 * Makefile.in: Add sim to list of directories sent with gdb
4940 * configure.in: Put back mips-dec-bsd* case.
4945 * configure.in (vax-*-ultrix2*): Add Ultrix 2.2 triplet.
4946 * config.guess: Change 'VAX*:ULTRIX:*:*' to 'VAX*:ULTRIX*:*:*'.
4947 * config/mh-vaxult2: New file.
4949 Tue Mar 2 18:11:03 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4951 * configure.in: remove no-op mips-dec-bsd* in "case $target"
4953 * Makefile.in (dir.info): only run gen-info-dir if it exists,
4954 (install-info): install dir.info only if it exists,
4955 (all-expect, install-expect): pass along X11_FLAGS_TO_PASS
4959 * configure.in: For vms target, skip bfd, ld, binutils. Do build
4960 gas for mips-dec-bsd.
4964 * configure (makesrcdir): If ${srcdir} is relative and not ".",
4965 and ${subdir} is not ".", set makesrcdir based on ${invsubdir}.
4969 * configure.in: Added "dejagnu" to hosttools list.
4973 * config.sub, configure.in, config.guess: Add support
4974 for Bosx, an AIX variant from Bull.
4979 * devo/dejagnu: Initial creation of devo/dejagnu.
4980 Migrated dejagnu testcases and support files for testing software
4981 tools to reside as subdirectories, currently called "testsuite",
4982 within the directory of the software tool. Migrated all programs,
4983 support libraries, etc. beloging to dejagnu proper from
4984 devo/deja-gnu to devo/dejagnu. These files were moved "as is"
4985 with no modifications. The changes to these files which will
4986 allow them to configure, build, and execute properly will be made
4991 * Makefile.in: Change send_pr to send-pr.
4992 * configure.in: Likewise.
4993 * send_pr: Renamed directory to send-pr.
4997 * Makefile.in: Add some extra semi-colons (needed if SHELL=bash).
5001 * README: Update for gdb-4.8 release.
5002 * Makefile.in (gdb.tar.Z): Add texinfo/tex3patch. Build
5003 gdb-xxx.tar.z (gzip'd) file also.
5005 Thu Feb 18 09:16:17 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5007 * Makefile.in: make all-diff depend on all-libiberty
5011 * config.guess: add vax-ultrix in the spirit of mips-ultrix.
5013 Tue Feb 16 05:57:15 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5015 * configure.in, Makefile.in: add hello, tar, gzip, recode, indent
5019 * Makefile.in (DEVO_SUPPORT): Remove etc directory
5020 (ETC_SUPPORT): Only add the files GDB wants from etc/.
5021 (gdb.tar.Z): Use ETC_SUPPORT. Use byacc when building the file.
5023 Thu Feb 11 20:14:28 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5025 * Makefile.in: makeinfo binary is in a new location
5029 * config.sub: Accept -ecoff as an OS.
5031 * Makefile.in: Various changes to eliminate a level of make
5032 recursion and reduce the required command line length.
5033 (BASE_FLAGS_TO_PASS): New variable holding flags passed to all
5035 (EXTRA_HOST_FLAGS, EXTRA_TARGET_FLAGS, EXTRA_GCC_FLAGS): New
5036 variables holding settings for specific sub-makes.
5037 (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS, GCC_FLAGS_TO_PASS): Rewrote
5038 in terms of BASE_FLAGS_TO_PASS.
5039 (TARGET_LIBS): New variable listing directories which use
5040 TARGET_FLAGS_TO_PASS.
5041 (subdir_do): Eliminated.
5042 (do-*): New set of targets to replace subdir_do.
5043 (various): All targets which used subdir_do now depend on do-*.
5044 (local-clean): Renamed from do_clean.
5045 (local-distclean): New target, dependency of distclean and
5047 (install-info): Don't create directories. Depend on dir.info
5048 rather than calling make recursively.
5049 (install-dir.info): Eliminated.
5050 (install-info-dirs): Create all info directories here.
5051 (dir.info): Depend upon do-install-info.
5053 * test-build.mk (HOLES): Added false.
5057 * config.guess: Recognize BSDI and BSDJ (Jolitz 386bsd).
5059 Thu Feb 4 20:49:18 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5061 * Makefile.in (info): remove dependency on all-texinfo. The
5062 problem was really in texinfo/C, not at this level.
5066 * Makefile.in (info): Added dependency on all-texinfo (PR 2112).
5070 * Makefile.in (make-gdb.tar.Z): Change BISON to 'bison -y' for
5075 * configure: Include srcdir in message about target of link not
5076 being found. Don't convert `-' to `_' in `with' options being
5079 Tue Feb 2 18:57:59 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5081 * configure.in: add uudecode to host_tools
5083 * Makefile.in: added {all,install}-uudecode targets, added them to
5084 the appropriate lists
5088 * Makefile.in (all-gcc): Added dependency on all-gas.
5090 * configure.in (mips-*-*): Build ld and binutils.
5094 * configure: check return code from mkdir, print error message and
5099 * Makefile.in (make-gdb.tar.Z): New location for texinfo.tex.
5103 * test-build.mk (HOLES): Added tar, cpio and uudecode.
5107 * config.sub (h8500): Recognize this as a cpu type.
5109 Sat Jan 23 20:32:01 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5111 * configure: source directory missing is no longer a warning
5113 * configure.in: recognize irix[34]* instead of irix[34]
5115 * Makefile.in: define and pass down X11_LIB
5117 * config/mh-sco: define X11_LIB to the mess that SCO ODT requires
5121 * guess-systype: Renamed to ...
5122 * config.guess: ... by popular request.
5123 * configure.in, Makefile.in: Update accordingly.
5128 + Add Convex, Cray/Unicos, and Encore/Multimax support.
5129 + Execute ./dummy instead of assuming . is in PATH.
5133 * guess-systype: New shell script. Attempts to guess the
5134 canonical host name of the executing host.
5135 Only a few hosts are supported so far.
5136 * configure: Call guess-systype if no host is specified.
5140 * Makefile.in (gcc-no-fixedincludes): Made to work with current
5146 * Makefile.in (GCC_FLAGS_TO_PASS): New variable.
5147 (all-gcc, install-gcc, subdir_do): Use it.
5151 * Makefile.in: Rename uninstalled gcc driver from gcc to xgcc.
5155 * Makefile.in: Removed explicit setting of SUBDIRS. SUBDIRS is now
5156 set exclusively by configure, using configure.in .
5158 Wed Jan 6 13:44:11 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5160 * test-build.mk: set $PATH for all builds
5162 * Makefile.in: pass TARGET_FLAGS_TO_PASS for xiberty and libm
5166 * Makefile.in (GCC_FOR_TARGET): Supply a default that matches
5167 the one used in gcc/Makefile.in, so that a null expansion doesn't
5168 override the one needed to build gcc with a native cc.
5173 * configure: Accept -with arguments.
5177 * Makefile.in: added h8300sim
5181 * config/mh-sco: Don't override BISON definition.
5183 * build-all.mk: If canonhost is i386-unknown-sco3.2v4, change it
5184 to i386-sco3.2v4. Set TARGETS and CFLAGS for i386-sco3.2v4.
5185 (all-cygnus, native, build-cygnus): Make
5186 $(canonhost)-stamp-3stage-done, not $(host)....
5187 * test-build.mk (stamp-3stage-compared): Use tail +10c for
5188 i386-sco3.2v4. Added else true to if command.
5192 * config.sub: (from FSF) Sequent uses a BSD-like OS.
5196 * configure.in (i[34]86-*-isc*): added; uses mh-sysv.
5198 Thu Dec 24 17:26:24 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5200 * configure.in: don't remove binutils from Solaris builds
5204 * Makefile.in: get rid of earlier definitions for *clean,
5205 also handle the recursive info rule better
5209 * Makefile.in (mostlyclean, distclean, realclean): Fix to
5210 do more-or-less the right thing.
5214 * Makefile.in: Add lines defining CC and CXX, and use CXX rather
5215 than gcc in definitions of CXX_FOR_BUILD and CXX_FOR_TARGET.
5217 Tue Dec 15 00:34:32 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5219 * Makefile.in: change all $(host_cpu)-$(host_vendor)-$(host_os) to
5222 * configure.in: split the configdirs list into 4 categories (native
5223 v. cross, library v. tool) and handle the cross-only and native-
5224 only in more reasonable (and correct!) way.
5226 Mon Dec 14 17:04:22 1992 Stu Grossman (grossman at cygnus.com)
5228 * configure.in (hppa*-*-*): Don't remove bfd and gdb from
5231 Sun Dec 13 00:37:26 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5233 * Makefile.in: extensive cleanup:: removed all of the explicit
5234 clean-* targets, collapsed many wrappers around subdir_do into
5235 one, added additional targets to satisfy standards.texi, deleted
5236 some old targets, some changes for consistency
5238 Fri Dec 11 20:18:02 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5240 * configure.in: handle some programs as cross-only, and others as
5243 * test-build.mk: handle partial holes in a more generic manner
5245 * Makefile.in: m4 depends on libiberty
5247 Mon Dec 7 06:43:27 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5249 * config/mh-sco: don't default $(CC) to gcc
5251 Thu Dec 3 21:52:11 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5253 * configure.in: add m4, textutils, fileutils, sed, shellutils,
5254 time, wdiff, and find to configdirs
5256 * Makefile.in: all, clean, and install rules for the new programs
5257 added to configure.in
5259 Mon Nov 30 14:54:34 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5261 * configure.in: use mh-sun for all *-sun-* hosts
5263 * config/mh-solaris: rework standard X location to use
5264 $OPENWINHOME, if defined.
5266 * config/mh-sun: handle X11 include locations
5268 * config/mh-decstation: define NeedFunctionPrototypes to 0, to
5269 work around dain-bramaged DECwindows include files
5271 Fri Nov 27 18:35:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5273 * Makefile.in: define flags for X11 include files and library file
5274 locations, pass them down to the programs that need this info
5276 * build-all.mk: added a 'native' target, to 3stage the native toolchain
5278 * config/{mh-hpux,mh-solaris}: define the "standard" locations for
5279 the vendor supplied X11 headers and libraries
5281 Sun Nov 22 18:59:13 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5283 * configure.in: start building libg++ for HP-UX targets
5287 * README: Update references to files moved into etc/.
5291 * config.sub (i386sol2, i486sol2): i[34]86-unknown-solaris2.
5292 * configure.in (i[34]86-*-solaris2*): Use config/mh-sysv4.
5296 * configure: accept dash as well as underscore in long option
5297 names for FSF compatibility.
5301 * config.sub: added -sco3.2v4 support from FSF.
5303 Sun Nov 8 21:14:30 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5305 * configure.in: expand the section that adds or removes
5306 directories from the list of programs to build, to handle native
5307 vs. cross in addition to host v. native
5311 * Makefile.in: Replace C++ in macro names with CXX.
5312 This is less likely to break ...
5314 Sat Nov 7 15:16:58 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5316 * test-build.mk: add -w to GNU_MAKE
5318 Fri Nov 6 23:10:37 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5320 * config.sub: remove 'sparc'-->'sparc-sun' default transformation,
5321 add 'sparc' to list of recognized cpus. This needed to make
5322 'sparc-aout' expand to 'sparc-unknown-aout' instead of 'sparc-sun-aout'.
5323 Delete some redundant ose68 variants. Recognize -wrs as an os,
5324 then changes that into $CPU-wrs-vxworks.
5326 * configure.in: remove most references to gdbtest, regularize
5327 target based program removal
5329 * test-build.mk: import from p3 tree (many fixes and changes)
5333 * Makefile.in: added rules to handle tcl, tk, and expect
5335 * configure.in: handle those directories if they exist
5337 Thu Nov 5 14:35:41 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5339 * config.sub: removed bogus hppabsd and hppahpux names, since
5340 "hppa" is not a valid cpu (hppa1.1 or hppa1.0 are, though)
5342 Thu Oct 29 00:12:41 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5344 * Makefile.in: all-gcc now depends on all-binutils. all-libg++
5345 depends upon all-xiberty
5347 * Makefile.in: changes from p3, including:
5351 * Makefile.in (XTRAFLAGS): include newlib directories if
5352 newlib/Makefile exists, rather than if host != target.
5356 * Makefile.in: added -nostdinc to XTRAFLAGS if we are using gcc
5357 from the same source tree and not building a cross-compiler. This
5358 matters for the libg++ configuration if reconfiguring a tree that
5359 has already been installed.
5363 * Makefile.in: added -I for newlib/targ-include to XTRAFLAGS, to
5364 pick up the machine and system specific header files.
5366 * Makefile.in: added AS_FOR_TARGET, passed down in
5367 TARGET_FLAGS_TO_PASS. Added CC_FOR_BUILD, which is intended to be
5368 the C compiler to use to create programs which are run in the
5369 build environment, set it to default to $(CC), and passed it down
5370 in FLAGS_TO_PASS and TARGET_FLAGS_TO_PASS.
5374 * Makefile.in: add $(host) = $(target) tests back to *_FOR_TARGET.
5375 We need them for unusual native builds, like systems without
5378 * configure: also define $(host_canonical) and
5379 $(target_canonical), which are the full, canonical names for the
5380 given host and target
5384 * Makefile.in: Added separate definitions for C++.
5388 * configure.in (configdirs): Add deja-gnu.
5392 * README: Update for configure.texi and gdb-4.7 release.
5396 * Makefile.in: Move "all" target to top of file.
5397 Previously, first target was ".PHONY" which caused BSD4.4 make
5398 to build .PHONY when make was run without arguments.
5402 * Makefile.in: Add COPYING.LIB to GDB releases, now that there's
5403 Library-copylefted code in libiberty.
5407 * config.sub: Replace m68kmote with plain old m68k.
5411 * Makefile.in: Remove space from blank line, avoid Make complaints.
5415 * config.sub: Complain if no argument is given. Added support for
5416 386bsd as OS and target alias.
5420 * Makefile.in (XTRAFLAGS): include newlib directories if
5421 newlib/Makefile exists, rather than if host != target.
5423 Mon Oct 5 03:00:09 1992 Mark Eichin (eichin at tweedledumber.cygnus.com)
5425 * config.sub: recognize sparclite-wrs-vxworks.
5427 * Makefile.in (install-xiberty): added *-xiberty make rules (from
5428 p3.) Added clean-xiberty to clean.
5430 Thu Oct 1 17:59:19 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5432 * configure.in: use *-*-* instead of nested cases for host and target
5436 * Makefile.in: added -nostdinc to XTRAFLAGS if we are using gcc
5437 from the same source tree and not building a cross-compiler. This
5438 matters for the libg++ configuration if reconfiguring a tree that
5439 has already been installed.
5443 * config.sub (i486v/i486v4): Merge in from FSF version.
5447 * configure: only set PWD if it is already set.
5451 * configure: just set PWD=`pwd` at the top, since Ultrix sh
5452 doesn't have unset and all success paths (and most error paths)
5453 out set it anyway. (Note: should change all uses of ${PWD=`pwd`}
5454 to just ${PWD} to avoid confusion.)
5458 * configure: always set $(tooldir) to $(libdir)/$(target_alias),
5459 even for a native compilation.
5463 Changes to make the gdb.tar.Z rule work better.
5465 * Makefile.in (GDB_SUPPORT_DIRS): Add opcodes.
5466 (DEVO_SUPPORT): Add configure.texi.
5467 (bfd-ilrt.tar.Z): Remove ancient rule.
5471 * Makefile.in: added -I for newlib/targ-include to XTRAFLAGS, to
5472 pick up the machine and system specific header files.
5474 * configure.in, config.sub: added new target m68010-adobe-scout,
5475 with alias of adobe68k. Changed configure.in to check for
5476 -scout before -sco* to avoid a false match.
5478 * Makefile.in: added AS_FOR_TARGET, passed down in
5479 TARGET_FLAGS_TO_PASS. Added CC_FOR_BUILD, which is intended to be
5480 the C compiler to use to create programs which are run in the
5481 build environment, set it to default to $(CC), and passed it down
5482 in FLAGS_TO_PASS and TARGET_FLAGS_TO_PASS.
5486 * Makefile.in: added TARGET_FLAGS_TO_PASS, CC_FOR_TARGET,
5487 AR_FOR_TARGET, RANLIB_FOR_TARGET, NM_FOR_TARGET. Pass
5488 TARGET_FLAGS_TO_PASS, which defines CC, AR, RANLIB and NM as the
5489 FOR_TARGET variants, to newlib and libg++.
5493 * Makefile.in (all-gas, all-gdb): Require all-opcodes to be built
5498 * config.sub: Accept `elf' as an environment.
5502 * Makefile.in (all-opcodes): cd into the right directory
5506 * configure: added -program_transform_name option, used as
5507 argument to sed when installing programs.
5508 configure.texi: added documentation for -program_prefix,
5509 -program_suffix and -program_transform_name.
5513 * config.sub: Accept i486 where i386 ok.
5517 * config.sub: accept we32k
5521 * config.sub, configure.in: accept OSE68000 and OSE68k.
5523 * Makefile.in: don't create all directories for ``make install'';
5524 let the subdirectories create the ones they need.
5526 Tue Aug 11 23:13:17 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5528 * COPYING: new file, GPL v2
5530 Tue Aug 4 01:12:43 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5532 * Makefile.in: use the new gen-info-dir, which needs a template
5533 argument (which also lives in texinfo)
5535 * configure.texi, standards.texi: fix INFO-DIR-ENTRY
5537 Mon Aug 3 15:41:28 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5539 * config/mh-solaris: removed the -xs from CFLAGS (let the people
5540 with Sun's C compiler deal with it themselved)
5544 * config.sub (ncr3000): Change i386 to i486.
5546 Thu Jul 23 00:12:17 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5548 * Makefile.in: add install-rcs, install-grep to
5549 install-no-fixedincludes, removed install-bison and install-libgcc
5553 * configure.in: grab the HPUX makefile fragment if on HPUX
5557 * Makefile.in: eradicate bison spoor (ditto libgcc).
5558 configure.in: recognise m68{k,000}-ericsson-OSE.
5559 es1800 is alias for m68k-ericsson-OSE
5561 Sun Jul 19 17:49:02 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5563 * configure.in: rearrange the parts that remove programs from
5564 configdirs, based now on HOST==TARGET or by canonical triple.
5568 * test-build.mk: recurse explicitly with -f test-build.mk when
5569 appropriate. predicate stage3 and comparison on the existence
5570 of gcc. That is, if gcc isn't around, we aren't three-staging.
5571 On very clean, also remove ...stamp-co. Build in-place before
5576 * Makefile.in, configure.in: add tgas
5580 * Makefile.in: a number of changes merged in from progressive.
5582 * configure.in: add libm.
5584 * .cvsignore: ignore some stuff that comes from test-build.mk.
5586 Wed Jul 8 00:01:30 1992 Stu Grossman (grossman at cygnus.com)
5588 * config/mh-solaris: Use -xs when compiling so that Sun-C puts
5589 a symbol-table into the executable.
5593 * config.sub: Add es1800 (m68k-ericsson-es1800).
5597 * configure: Add program_suffix (parallel to program_prefix)
5598 * Makefile.in: adjust directory-creating script for losing decstation
5602 * configure: Minor $subdir-related fixes.
5606 * configure: fix various problems with propogating
5607 makefile_target_frag in subdirs.
5608 * configure.in: config libgcc if its there
5610 Fri Jun 19 15:19:40 1992 Stu Grossman (grossman at cygnus.com)
5612 * config.sub: HPPA merge.
5616 * config/mh-ncr3000 (INSTALL): Don't use /usr/ucb/install,
5617 it is broken on ncr 3000's.
5619 Sun Jun 14 10:29:19 1992 John Gilmore (gnu at cygnus.com)
5621 * Makefile.in: Replace all-bison with all-byacc in all
5622 dependency lines for other tools (which now use byacc).
5624 Fri Jun 12 22:21:57 1992 John Gilmore (gnu at cygnus.com)
5626 * config.sub: Add sun4sol2 => sparc-sun-solaris2.
5628 Tue Jun 9 17:18:11 1992 Fred Fish (fnf at cygnus.com)
5630 * config/{mh-ncr3000, mh-sysv4}: Add INSTALL.
5634 * Makefile.in: make gprof rules similar to byacc rules (instead of
5635 vestigal $(unsubdir) that didn't work...)
5639 * config.sub: Add support for Linux.
5640 * Makefile.in: Use $(FLAGS_TO_PASS) more consistently
5641 (at least for libg++).
5645 * configure.texi: fix doc for the -nfp option to configure
5649 * Makefile.in (all-binutils): ar needs flex, so depend on all-flex.
5651 Sun May 31 15:04:08 1992 Mark Eichin (eichin at cygnus.com)
5653 * config.sub: changed [^-]+ to [^-][^-]* so that it works under
5654 Sun sed. (BSD 4.3 sed doesn't handle [^-]+ either.)
5655 * configure.in: added solaris* host_makefile_frag hook.
5657 Sun May 31 01:10:34 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5659 * config.sub: changed recognition of m68000 so that various
5660 m68k types can be specified via m680[01234]0
5662 Sat May 30 21:01:06 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5664 * config.sub (basic_machine): fix sed so that '-foo' isn't
5665 completely substituted out while .+'-foo' loses the '-foo'
5669 * config.sub ($os): Add -aout.
5673 * configure: If host_makefile_frag is absolute, don't
5674 prefix ${invsubdir} (relevant to libg++ auto-configure).
5678 * Makefile.in (tooldir): Define it.
5679 (all-ld): Depend on all-flex.
5683 * Makefile.in (check): Fix libg++ special case.
5687 * configure: do not bury `pwd` into config.status, thus do fewer
5690 * configure: print the "Building in" message only when building in
5691 other than "." AND verbose.
5693 * configure: remove -s, rework -v to better accomodate guested
5696 * standards.texi: updated to 3 may, fixed librid <-> libdir typo.
5700 * Makefile.in: macroize flags passed on recursion. remove
5705 * configure: get makesrcdir right for subdirs deeper than 1.
5707 * Makefile.in: pass INSTALL, INSTALL_DATA, INSTALL_PROGRAM on
5712 * Makefile.in: don't print subdir_do or recursion lines.
5716 * standards.texi: added menu item.
5718 * Makefile.in: build and install standards.info.
5720 * standards.texi: new file.
5724 * configure: test for and move config.status pieces from
5729 * config/mh-delta88, config/mh-ncr3000: Replace MINUS_G with
5730 CFLAGS per new configuration strategy.
5731 * configure: Test for existance of files before trying to mv
5732 them, to avoid numerous non-existance messages.
5736 * configure: correct final line of config.status.
5738 * configure: patch from eggert. Avoids a protection problem if
5739 the original Makefile.in is read only.
5741 * configure: use move-if-change from gcc to create config.status.
5742 Some makefiles depend on config.status to tell if a directory
5743 has been reconfigured for a different host. This change
5744 prevents those directories from remaking everything in the case
5745 where the reconfig was only intended to rebuild a Makefile.
5747 * configure: test for config.sub with "config.sub sun4" rather
5748 than "config.sub ${host_alias}". Otherwise we can't tell a bad
5749 host alias from a missing config.sub.
5753 * Makefile.in: explicitly pass CFLAGS on recursion. no longer pass
5754 MINUS_G (this can be done with CFLAGS). Default CFLAGS to -g.
5758 * configure: mkdir ${subdir} as needed.
5762 * Makefile.in,configure.in: added autoconf.
5766 * Makefile.in: no longer pass against on recursion.
5768 * Makefile.in: added .NOEXPORT: so that stray makefile_frag
5769 definitions are not inherited.
5771 * configure: correct makesrcdir when subdir is .
5775 * configure: Add support for 'subdirs' variable, which is
5776 like 'configdirs', except that configure doesn't re-invoke
5777 itself for subdirs, it just creates a Makefile for each subdir.
5778 * configure.texi: Document subdirs.
5780 Mon Apr 13 18:50:16 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5782 * configure.in: added flex to configdirs
5786 * Makefile.in: remove clean-stamps from clean.
5788 Sat Apr 11 03:52:03 1992 John Gilmore (gnu at cygnus.com)
5790 * configure.in: Add gdbtest to configdirs.
5794 * Makefile.in (MINUS_G): Add macro, default to -g, pass on
5796 * configure.in: Recognize new ncr3000 config.
5800 * Makefile.in, configure.in: removed references to gdbm.
5804 * config.sub: Don't canonicalize os value
5805 newsos* to bsd (readline needs to check for newsos).
5806 (This fix was earlier made Jan 31, but got re-broken.)
5808 Mon Apr 6 14:34:08 1992 Stu Grossman (grossman at cygnus.com)
5810 * configure.in: sco is an os, not a vendor!
5812 * configure: Quote $( better. Keep various shells happy.
5816 * Makefile.in: eliminate stamp-files.
5820 * Makefile.in: add send_pr. remove "force" from .stmp-gprof rule.
5821 Supress echoing of all the "if [ -d ... $(MAKE)" lines.
5825 * config.sub: fix iris/iris3.
5829 * configure: re-add -rm.
5833 * Maskefile.in: add .stmp-rcs to all.
5835 * configure.in: remove gas from rs6000 build, use aix host fragment.
5839 * configure: pass down site_option during recursion.
5841 Thu Mar 19 16:49:36 1992 Stu Grossman (grossman at cygnus.com)
5843 * Makefile.in (all.cross): Add .stmp-bfd .stmp-readline.
5847 * configure: Change exec_prefix so that it really defaults to prefix.
5851 * Makefile.in, configure.in: Add support for mmalloc library.
5855 * Makefile.in: add stmp dependencies for a few more things.
5859 * configure: adjusted error message on objdir/srcdir configure
5860 collision, per john's suggestion.
5862 * Makefile.in: add libiberty stmp to all and all.cross.
5866 * Makefile.in: remove force dependencies, add grep to all.
5870 * Makefile.in: drop flex. make stamp files work.
5872 * configure: added test for conflicting configuration in srcdir,
5873 remove trailing slashes from srcdir. Otherwise emacs gdb mode
5874 gets cranky. use relative paths for configure and srcdir
5875 whenever possible. Send some error messages to stderr that were
5880 * Makefile.in: Fix libg++ rule to check for gcc directory
5881 before using gcc/gcc. Also pass XTRAFLAGS.
5883 Thu Mar 5 21:45:07 1992 K. Richard Pixley (rich@sendai)
5885 * Makefile.in: added stmp-files so that directories aren't polled
5886 when they are already built.
5888 * configure.texi: fixed a node pointer problem.
5890 Thu Mar 5 12:05:58 1992 Stu Grossman (grossman at cygnus.com)
5892 * config.sub configure.in config/mh-irix4 gdb/configure.in
5893 gdb/mips-tdep.c gdb/mipsread.c gdb/procfs.c gdb/signame.h
5894 gdb/tm-irix3.h gdb/tm-mips.h gdb/xm-irix4.h gdb/config/mt-irix3
5895 gdb/config/mh-irix4 texinfo/configure.in: Port to SGI Irix-4.x.
5899 * configure: -recurring becomes -silent. corrected help message
5902 * Makefile.in: mkdir $(exec_prefix) and $(tooldir).
5906 * configure: when building Makefile for crosses, replace
5907 tooldir and program_prefix. default srcdir from location of
5908 config.sub. remove "for host in hosts" and "for target in
5913 * Makefile.in: Do not pass bindir or mandir to cvs.
5917 * Makefile.in, configure.in: removed traces of namesubdir,
5918 -subdirs, $(subdir), $(unsubdir), some rcs triggers. Forced
5919 copyrights to '92, changed some from Cygnus to FSF.
5921 * configure.texi: remove most references to multiple hosts,
5922 multiple targets, subdirs, etc.
5924 * configure.man: removed rcsid. reference config.sub not
5927 * Makefile.in: mkdir $(infodir) on install-info.
5929 Wed Feb 19 15:41:13 1992 John Gilmore (gnu at cygnus.com)
5931 * configure.texi: Explain better about .gdbinit and about
5932 the environment that configure.in sections run in.
5934 Fri Feb 7 07:55:00 1992 John Gilmore (gnu at cygnus.com)
5936 * configure.in: Ultrix is only a decstation if it's a MIPS.
5938 Fri Jan 31 21:54:51 1992 John Gilmore (gnu at cygnus.com)
5940 * README: DOC.configure => cfg-paper.texi.
5942 Fri Jan 31 21:48:18 1992 Stu Grossman (grossman at cygnus.com)
5944 * config.sub (near case $os): Don't convert newsos* to bsd!
5946 Fri Jan 31 02:27:32 1992 John Gilmore (gnu at cygnus.com)
5948 * Makefile.in: Reinstall change from gdb-4.3 that reduces
5949 the number of copies of COPYING that go into the GDB tar file.
5951 Thu Jan 30 16:17:30 1992 Stu Grossman (grossman at cygnus.com)
5953 * bfd/configure.in, config/mh-sco, gdb/config/mh-i386sco,
5954 gdb/config/mt-i386v32, gdb/configure.in, readline/configure.in:
5955 Fix SCO configuration stuff.
5957 Tue Jan 28 23:51:07 1992 Per Bothner (bothner at cygnus.com)
5959 * Makefile.in: For libg++, make sure the -I pointing
5960 to the gcc directory goes *after* all the libg++-local -I flags.
5961 Also, move just-gcc dependency from just-libg++ to all-libg++.
5963 Tue Jan 28 12:56:24 1992 Stu Grossman (grossman at cygnus.com)
5965 * configure: Change -x to -f to keep Ultrix /bin/test happy.
5967 Sat Jan 18 17:45:11 1992 Stu Grossman (grossman at cygnus.com)
5969 * Makefile.in (make-gdb.tar.Z): Remove texinfo targets.
5971 Sat Jan 18 17:03:21 1992 Fred Fish (fnf at cygnus.com)
5973 * config.sub: Add stratus configuration frags. Also
5976 Sat Jan 18 15:35:29 1992 Stu Grossman (grossman at cygnus.com)
5978 * Makefile.in (DEV_SUPPORT): add configure.man.
5980 * config.sub(Decode manufacturer-specific): add -none*.
5982 Fri Jan 17 17:58:05 1992 Stu Grossman (grossman at cygnus.com)
5984 * Makefile.in: remove form feeds to make Sun's make happy.
5985 (DEVO_SUPPORT): DOC.configure => cfg-paper.texi.
5987 Sat Jan 4 16:11:44 1992 John Gilmore (gnu at cygnus.com)
5989 * Makefile.in (AR_FLAGS): Make quieter.
5991 Thu Jan 2 22:57:12 1992 John Gilmore (gnu at cygnus.com)
5993 * configure.in: Add libg++.
5994 * configure: When verbose, don't output the command line at each
5995 level; it will be unremarkably the same as the previous version,
5996 which will be the same as what the user typed.
5998 Fri Dec 27 16:26:47 1991 K. Richard Pixley (rich at cygnus.com)
6000 * configure.in, Makefile.in: fix clean-info, add flex. add
6003 * configure: be less sensitive to spaces in Makefile.in. Do not
6004 look for sources in "..". Doing so breaks subdirectories that
6005 might have their own configure. If a subdir has it's own
6006 configure script, use it.
6008 Thu Dec 26 16:30:26 1991 K. Richard Pixley (rich at cygnus.com)
6010 * cfg-paper.texi: some changes suggested by rms.
6012 Thu Dec 26 10:13:36 1991 Fred Fish (fnf at cygnus.com)
6014 * config.sub: Merge in some small additions from the FSF version,
6015 taken from the gcc distribution, to bring the Cygnus and FSF
6016 versions into closer sync.
6018 Fri Dec 20 11:34:18 1991 Fred Fish (fnf at cygnus.com)
6020 * configure.in: Changed svr4 references to sysv4.
6022 Thu Dec 19 15:54:29 1991 K. Richard Pixley (rich at cygnus.com)
6024 * configure: added -V for version number option.
6026 Wed Dec 18 15:39:34 1991 K. Richard Pixley (rich at cygnus.com)
6028 * DOC.configure, cfg-paper.texi: revised, updated, and texinfo'd.
6029 renamed from DOC.configure to cfg-paper.texi.
6031 Mon Dec 16 23:05:19 1991 K. Richard Pixley (rich at rtl.cygnus.com)
6033 * configure, config.subr, config.sub: config.subr is now
6036 Fri Dec 13 01:17:06 1991 K. Richard Pixley (rich at cygnus.com)
6038 * configure.texi: new file, in progress.
6040 * Makefile.in: build info file and install the man page for
6043 * configure.man: new file, first cut.
6045 * configure: find config.subr again now that configuration "none"
6046 has gone. removed all traces of the -ansi option. removed all
6047 traces of the -languages option.
6049 * config.subr: resync from rms.
6051 Wed Dec 11 22:25:20 1991 K. Richard Pixley (rich at rtl.cygnus.com)
6053 * configure, config.sub, config.subr: merge config.sub into
6054 config.subr, call the result config.subr, remove config.sub, use
6057 * Makefile.in: revised install for dir.info.
6059 Tue Dec 10 00:04:35 1991 K. Richard Pixley (rich at rtl.cygnus.com)
6061 * configure.in: add decstation host makefile frag.
6063 * Makefile.in: BISON now bison -y again. also install-gcc on
6064 install. clean-gdbm on clean. infodir belongs in datadir.
6065 Make directories for info install. Build dir.info here then
6068 Mon Dec 9 16:48:33 1991 K. Richard Pixley (rich at rtl.cygnus.com)
6070 * Makefile.in: fix for bad directory tests.
6072 Sat Dec 7 00:17:01 1991 K. Richard Pixley (rich at rtl.cygnus.com)
6074 * configure: \{1,2\} appears to be a sysv'ism. Use a different
6075 regexp. -srcdir relative was being handled incorrectly.
6077 * Makefile.in: unwrapped some for loops so that parallel makes
6078 work again and so one can focus one's attention on a particular
6081 Fri Dec 6 00:22:08 1991 K. Richard Pixley (rich at rtl.cygnus.com)
6083 * configure: added PWD as a stand in for `pwd` (for speed). use
6084 elif wherever possible. make -srcdir work without -objdir.
6085 -objdir= commented out.
6087 Thu Dec 5 22:46:52 1991 K. Richard Pixley (rich at rtl.cygnus.com)
6089 * configure: +options become --options. -subdirs commented out.
6090 added -host, -datadir. Renamed -destdir to -prefix. Comment in
6091 Makefile now at top of generated Makefile. Removed cvs log
6092 entries. added -srcdir. create .gdbinit only if there is one
6095 * Makefile.in: idestdir and ddestdir go away. Added copyrights
6096 and shift gpl to v2. Added ChangeLog if it didn't exist. docdir
6097 and mandir now keyed off datadir by default.
6099 Fri Nov 22 07:38:11 1991 K. Richard Pixley (rich at rtl.cygnus.com)
6101 * Freshly created ChangeLog.
6108 version-control: never