4 * config.guess: Recognize i586-pc-beos.
5 * configure.in: Don't build some bits for beos.
10 * configure: If CC is set but CFLAGS is not, and CC is gcc, make
11 CFLAGS default to -O2.
13 * ltmain.sh: Add some hacks to make SunOS --enable-shared work
18 * ltmain.sh: Correct install when using a different shell.
22 * ltconfig, ltmain.sh: Update to libtool 1.2b.
26 * makefile.vms: Update to build binutils/makefile.vms. Add install
32 * configure.in: configure cgen if --enable-cgen-maint.
33 * Makefile.in (ALL_MODULES,CLEAN_MODULES): Add all-cgen.
35 (all-opcodes,all-sim): Depend on all-cgen.
40 * ltconfig: Update to correct AIX handling.
44 * configure.in (noconfigdirs): Add configure pattern for mips tx39
49 * configure.in: Add cygmon and libstub support for mn10200.
53 * Makefile.in (grep): Grep no longer depends on libiberty.
57 * Makefile.in: all-snavigator needs all-libgui.
61 * configure.in: Add cygmon and libstub support for mn10300.
65 * missing: Update to version from automake 1.3.
67 * ltmain.sh: On installation, don't get confused if the same name
68 appears more than once in the list of library names.
72 * config.sub: Accept m68060 and m5200 as CPU names.
76 * configure: Use && rather than using -a in test, because odd
77 strings can confuse test.
78 * configure.in: Likewise.
82 * ltconfig, ltmain.sh: Bring in Visual C++ support.
86 * COPYING.LIB: Update FSF address.
90 * ltconfig, ltmain.sh: Update to libtool 1.2a.
92 * Makefile.in (GASB_SUPPORT_DIRS): Remove intl; already included via
97 * ltconfig, ltmain.sh: Avoid producing a version number if
98 -version-info was not used.
103 * Makefile.in: Add dependencies for boehm-gc to libjava.
108 * configure.in: Add --with-newlib to CONFIG_ARGUMENTS if we are
109 building with newlib.
113 * Makefile.in (EXTRA_GCC_FLAGS): Remove backslash at end;
114 Solaris `make' causes it to continue to next definition.
119 * Makefile.in: Added dependencies to all-target-boehm-gc and
120 all-target-libjava to have them configure during the build.
126 * Makefile.in (install-gdbtk): Call this 'install-gdb' so that
127 the right GUI libraries and files are installed along with GDB.
132 * configure.in: Change alpha to alpha* in several places.
136 * config.sub: Recognize sparc86x.
140 * configure: Set CXXFLAGS from CXXFLAGS, not CFLAGS.
142 start-sanitize-cygnus
145 * Makefile.in: Added standard targets for `flexlm'.
146 Added intermodule dependency for `all-snavigator'.
148 * configure.in: Include `flexlm' as a host library.
153 * ltconfig: Update cygwin32 support.
155 * Makefile.in (GAS_SUPPORT_DIRS): Add intl.
156 (BINUTILS_SUPPORT_DIRS, GASB_SUPPORT_DIRS): Likewise.
157 (GDB_SUPPORT_DIRS): Likewise.
161 * configure.in (target_makefile_frag): If --enable-target-optspace,
162 use -Os to compile target libraries rather than -O2. Default to
163 using -Os for d10v and m32r if --{enable,disable}-target-optspace is
166 * configure.in (target_cflags): Ditto for d30v.
171 * Makefile.in (all-bfd): Depend on all-intl.
172 (all-binutils): Likewise.
174 (all-gprof): Likewise.
180 * Makefile.in (ALL_TARGET_MODULES): Added libjava, boehm-gc.
181 (CONFIGURE_TARGET_MODULES): Likewise.
182 (CHECK_TARGET_MODULES): Likewise.
183 (INSTALL_TARGET_MODULES): Likewise.
184 (CLEAN_TARGET_MODULES): Likewise.
185 (all-target-libjava): New target.
186 (all-target-boehm-gc): Likewise.
187 * configure.in (target_libs): Added libjava, boehm-gc.
192 * configure.in (host_tools): Fix typo, lbtool -> libtool.
196 * Makefile.in (all-bfd): Depend upon all-libiberty.
198 * ltconfig, ltmain.sh: Bring in newer cygwin32 support.
202 * Makefile.in: Add libstub.
204 * configure.in: Ditto. Build libstub for targets that have cygmon
209 * configure.in: Don't set PICFLAG on ix86-cygwin32.
213 * configure.in: Recognise i[3456]96-*-sysv5* as a valid host, and
214 use mh-sysv5 if specified. Support gprof on SCO Open Server.
218 * ltconfig: Add cygwin32 support.
220 * Makefile.in, configure.in: Add libtool as a native only directory
221 to configure and build.
225 * Makefile.in (EXTRA_GCC_FLAGS): XFOO lines shortened.
229 * Makefile.in: add ash make rules
230 * configure.in: add ash to native_only and host_tools lists
235 * Makefile.in: Add libidetcl, like libide.
236 (all-libide): Remove dependencies on all-tcl, all-tk, all-itcl,
238 * configure.IN: Add libidetcl, like libide.
239 * configure (GDB_TK): If enable_ide, add all-libidetcl.
244 * Makefile.in (all-gettext, all-intl): New targets.
245 (ALL_MODULES): Added all-gettext, all-intl.
246 (CROSS_CHECK_MODULES): Added check-gettext, check-intl.
247 (INSTALL_MODULES): Added install-gettext, install-intl.
248 (CLEAN_MODULES): Added clean-gettext, clean-intl.
250 * configure.in (host_tools): Added gettext.
251 (native_only): Likewise.
252 (noconfigdirs) [various cases]: Likewise.
253 (host_libs): Added intl.
258 * configure: Do not disable building gdbtk for cygwin32 hosts.
263 * Makefile.in: Revert yesterday's change.
264 (all-target-winsup): all-target-librx stays out of here.
268 * Makefile.in (TARGET_CONFIGDIRS, ALL_TARGET_MODULES,
269 CONFIGURE_TARGET_MODULES, CHECK_TARGET_MODULES,
270 INSTALL_TARGET_MODULES, CLEAN_TARGET_MODULES, all-target-winsup):
271 Remove references to librx and libg++.
275 * Makefile.in (BASE_FLAGS_TO_PASS): Pass $(lispdir) down to
280 * Makefile.in (CC_FOR_TARGET): Use $(TARGET_SUBDIR) when passing -B
281 for newlib directory.
282 (CXX_FOR_TARGET): Likewise.
286 * ltconfig: Update after libtool/ltconfig.in change for
291 * ltconfig, ltmain.sh: Update to libtool 1.2.
295 * configure.in: Add Thumb-pe target.
298 * Makefile.in - changed sn targets to snavigator
299 * configure.in - changed sn targets to snavigator
303 * config-ml.in: After building symlink tree call make distclean
304 if a Makefile got linked into ${ml_dir}/${ml_libdir}; this happens
305 to be the case for libiberty.
309 * config.sub: Accept alphapca56 and alphaev6 properly.
311 start-sanitize-vr4320
314 * config.sub (mips64vr4320-unknown-elf) : Added.
320 * config.sub (sco5): Fix typo.
324 * Makefile.in (INSTALL_MODULES): Move install-tcl before
326 (install-itcl): Remove dependency on install-tcl.
330 * configure.in: Remove libgloss from noconfigdirs for MN10300.
334 * configure: Don't let builds be done in source tree.
338 * configure.in: Don't build libgui for a cygwin32 target when not on
343 * configure (redirect): Set to null, so default behavior of
344 configure is now --verbose.
348 * ltmain.sh (mkdir): Check that the directory doesn't exist
349 before we exit with error, so that we don't get races during
354 * ltconfig, ltmain.sh: Update from libtool 1.0i.
358 * configure.in (host_tools, native_only): Add libtool.
362 * configure.in: add target-gperf to noconfigdirs for Cygwin32.
363 Fix typo in ming config comment.
367 * ltconfig, ltmain.sh: Update from libtool 1.0h.
371 * config.sub: Add tic30 cases, and map c30 to tic30.
375 * configure.in: Remove expect from noconfigdirs when target
376 is cygwin32. OK to build expect and dejagnu with Canadian
382 * configure.in: Add dvp-elf support.
383 * config.sub: Recognize dvp cpu.
388 * configure.in: Do build expect, dejagnu, and cvssrc for a cygwin32
391 * config.guess: Use ${UNAME_MACHINE} rather than i386 for cygwin32
396 * Makefile.in (BASE_FLAGS_TO_PASS): Remove passing $(local_prefix)
397 here as it is not defined in the toplevel Makefile.
401 * configure (package_makefile_rules_frag): New variable, which names
402 a file with generic rules, ...
403 Change comment to mention we now have FIVE parts.
404 * configure: Undo last change.
408 * config.guess: More accurate determination of HP processor types.
409 * config.sub: More accurate determination of HP processor types.
413 * configure (package_makefile_frag): Move inserting the
414 ${package_makefile_frag} to where it should be according
419 * config.guess: Add support for Linux/ARM.
423 * .cvsignore: Remove *-info and *-install since they match
424 release-info and mpw-install, which we don't want to just ignore.
428 * Makefile.in (FLAGS_TO_PASS): Pass down gcc_include_dir and
429 local_prefix to sub-make invocations.
433 * configure.in: Check makefile fragments in the source
438 * configure.in: check whether host and target makefile
439 fragments exist before adding them to *_makefile_frag
443 * configure.in (target_configdirs): Add cygmon for sparc64-elf.
447 * configure.in: Make sure we only replace RPATH_ENVVAR on
448 lines which begin with RPATH_ENVVAR, i.e. add "^" to the
451 * Makefile.in (BASE_FLAGS_TO_PASS): Pass RRPATH_ENVVAR down
456 * config-ml.in (multi-do): LDFLAGS must include multilib
461 * config.guess: Recognize i[3456]-i586-UnixWare7-sysv5.
465 * config.sub: Add mingw32 support.
466 * configure.in: Likewise.
467 * mh-mingw32: New file.
471 * configure.in: Finalize support for {alpha|powerpc}*-*-linux-gnulibc1
475 * Makefile.in (INSTALL_TARGET): Do install-gcc first.
476 * configure (gxx_include_dir): Provide a definition for subdirs
477 which do not use autoconf.
481 * config.guess: Sync with egcs. Picks up new alpha support,
482 BeOS & some additional linux support.
486 * config.guess: HP 9000/803 is a PA1.1 machine.
488 start-sanitize-vr5400
491 * config.sub (mips64vr5xxx-elf): Handle. Treat as mips64vr5000-elf.
497 * configure.in (host_makefile_frag, target_makefile_frag):
498 Handle multiple config files.
499 (alpha-*-linux*): Treat alpha-*-linux* as alpha-*-linux* and
509 * configure: Only put libide in GDB_TK if --enable-ide.
515 * configure.in (d30v-*-*): Allow configuring of libide, vmake, etc.
520 * Makefile.in: Add libgui directory.
521 (GDB_TK): Add all-libgui.
522 * configure.in: Add libgui directory.
523 * configure: Add all-libgui to GDB_TK.
527 * config-ml.in (multidirs): Add m32r to multilib list.
531 * Makefile.in (all-target-gperf): Change dependency to
532 all-target-libstdc++.
536 Source directory cvs renamed to cvssrc:
537 * configure.in (host_tools): Change cvs to cvssrc.
538 (native_only): Likewise.
539 (noconfigdirs) [various cases]: Likewise.
540 * Makefile.in (ALL_MODULES): Change all-cvs to all-cvssrc.
541 (CROSS_CHECK_MODULES): Change check-cvs to check-cvssrc.
542 (INSTALL_MODULES): Change install-cvs to install-cvssrc.
543 (CLEAN_MODULES): Change clean-cvs to clean-cvssrc.
544 (all-cvssrc): Rename target from all-cvs.
548 * configure.in (noconfigdirs): Add support for Thumb target.
550 * config.sub (maybe_os): Add support for Thumb target.
555 * configure (GDB_TK): add all-libide to dependency list
559 * configure.in (host_libs): Build libide all of the time.
560 (noconfigdirs): Remove libide from all places that set noconfigdirs.
564 * Makefile.in (all-vmake): remove double dependency on all-libide
569 * Makefile.in: Add rules for cygmon.
571 * configure.in: Build cygmon for sparc-elf and sparclite-aout.
575 * Makefile.in, configure, configure.in, ChangeLog: merge with foundry's
580 * ltmain.sh: If mkdir fails, check whether the directory was created
581 anyhow by some other process.
586 * configure.in (d30v-*-*): Configure all directories.
590 * configure.in (d30v-*-*): Configure newlib, libiberty directories
595 * configure.in (d30v-*-*): Configure target-libgloss on the D30V.
600 * include/libiberty.h: Add extern "C" { so it can be used with C++
602 * include/remote-sim.h: Add extern "C" { so it can be used with C++
608 * config.sub: Move tx19 configury to reduce spurious differences
615 * config.sub: Move tx49 configury to reduce spurious differences
622 * configure.in (d30v-*-*): Configure GCC now.
628 * config.sub: Add tx49 configury.
634 * Makefile.in (install-foundry): New target.
639 * configure.in: Remove a "second pass" of tweaking noconfigdirs,
644 * Makefile.in: check-target-libio depends on all-target-libstdc++.
646 start-sanitize-vr5400
649 * config.sub (maybe_os): Add mips64vr5400.
654 * makefile.vms: Fix to work with DEC C.
659 * Makefile.in (all-jstools): Depend on all-tix.
664 * config.sub: Add mips-tx39-elf to marketing names.
668 * ltmain.sh: Handle symlinks in generated script.
672 * configure: Handle autoconf style directory options: --bindir,
673 --datadir, --includedir, --infodir, --libdir, --libexecdir,
674 --mandir, --oldincludedir, --sbindir, --sharedstatedir,
676 * Makefile.in (sbindir, libexecdir, sysconfdir): New variables.
677 (sharedstatedir, localstatedir, oldincludedir): New variables.
678 (BASE_FLAGS_TO_PASS): Pass down bindir, datadir, includedir,
679 infodir, libdir, libexecdir, localstatedir, mandir, oldincludedir,
680 sbindir, sharedstatedir, and sysconfdir.
685 * configure.in (d30v): Remove tcl, tk, expect, gdb, itcl, tix, db,
686 sn, and gnuserv from noconfigdirs.
691 * ltmain.sh: Tweak shell pattern to avoid bug in NetBSD /bin/sh.
696 * configure (tooldir): enable_gdbtk=YES for cygwin32, NO for
697 windows. Consistent with gdb/configure.
702 * config/mt-linux: Define CXXFLAGS to make sure -fvtable-thunks is
704 * configure.in: Name Linux target fragment.
706 * configure: Rewrite so that project Makefile fragment is inserted
707 first and appears last in the resulting Makefile.
711 * Makefile.in (install-itcl): Install tcl first.
715 * config/mh-cygwin32: ok to build split texinfo files
719 * configure.in: remove bison from noconfigdirs for Cygwin32 host
723 * config.guess: Merge with FSF.
727 * config.sub: Add "marketing-names" patch.
730 * config.sub: Add tx19/r1900.
735 * configure.in (*-*-rtems*): Do not build libgloss for rtems.
740 * Makefile.in (GDB_TK): Add all-libide.
745 * ltconfig: Set CONFIG_SHELL in libtool.
746 * ltmain.sh: Use CONFIG_SHELL instead of /bin/sh
750 * Makefile.in (all-sim): Depends on all-readline.
754 * Makefile.in (BISON, YACC): Use $$s.
755 (all-bison): Depend on all-texinfo.
759 * Makefile.in (BISON): Add -L flag.
765 * configure.in (noconfigdirs): Add support for v850e target.
767 * config.sub (maybe_os): Add support for v850e target.
771 * configure.in (noconfigdirs): Add support for v850ea target.
773 * config.sub (maybe_os): Add support for v850ea target.
778 * config.sub: Add mipstx39. Delete r3900.
783 * Makefile.in (all-vmake): Depends on all-tix.
788 * Makefile.in (all-autoconf): Depends on all-texinfo.
792 * config-ml.in ({powerpc,rs6000}*-*-*): Update to current AIX and
797 * configure: Get CFLAGS and CXXFLAGS from Makefile, if possible.
799 * configure: When handling a Canadian Cross, handle YACC as well as
800 BISON. Just set BISON to bison. When setting YACC, prefer bison.
801 * Makefile.in (all-bison): Depend upon all-texinfo.
804 * Makefile.in (all-vmake): Depend upon all-tix.
809 * Makefile.in (BISON): bison, not byacc or bison -y.
810 (YACC): bison -y or byacc or yacc.
811 (various): Add *-bison as appropriate.
812 (taz): No need to mess with BISON anymore.
816 * configure: If OSTYPE matches *win32*, try to find a good value for
822 * Makefile.in, configure.in: Handle jstools like vmake.
827 * Makefile.in (taz): Get the version number from AM_INIT_AUTOMAKE in
828 configure.in if it is present.
832 * Makefile.in (LD_FOR_TARGET): Change ld.new to ld-new.
836 * config.sub: Recognize `arc' cpu.
837 * configure.in: Likewise.
838 * config-ml.in: Likewise.
842 * Makefile.in ($(INSTALL_X11_MODULES)): Depend upon installdirs.
846 * configure: Changed sed delimiter from ':' to '|' when
847 attempting to substitute ${config_shell} for SHELL. On
848 NT ${config_shell} may contain a ':' in it.
852 * Makefile.in (EXTRA_GCC_FLAGS): Fix for non-bash shells.
856 * Makefile.in (AS_FOR_TARGET): Change as.new to as-new.
860 * Makefile.in (NM_FOR_TARGET): Change nm.new to nm-new.
862 * ylwrap: If the program is a relative path, force it to be
867 * configure (tooldir): Set BISON to `bison -y' and not just bison.
871 * Makefile.in (CC_FOR_TARGET): When winsup/Makefile present,
872 correctly specify the target build directory $(TARGET_SUBDIR)/winsup
877 * Makefile.in (EXTRA_GCC_FLAGS): Fix handling of macros with values
883 * Makefile.in (DEVO_SUPPORT): Add ylwrap.
885 * ltmain.sh: Handle /bin/sh at start of install program.
887 * Makefile.in (DEVO_SUPPORT): Add ltconfig, ltmain.sh, and missing.
889 * ltconfig, ltmain.sh: New files, from libtool 1.0.
890 * missing: New file, from automake 1.2.
894 * Makefile.in: Treat tix like tk, putting it in X11_MODULES. Add
895 check-tk to CHECK_X11_MODULES.
899 * config.sub: Merge with FSF.
903 * config.guess: Merge with FSF.
907 * configure: Treat msdosdjgpp like go32.
908 * configure.in: Likewise. Don't remove gprof for go32.
910 * configure: Change Makefile.tem2 to Makefile.tm2.
914 * configure.in (noconfigdirs): For alpha-dec-osf*, don't ignore grep.
918 * install-sh (chmodcmd): Set to null if the DST directory already
919 exists. Same as Nov 11th change.
923 * configure (GDB_TK): Needs itcl and tix.
927 * config.guess: Update from FSF.
931 * Makefile.in (GDB_TK): Depend on itcl and tix.
935 * Makefile.in (INSTALL_PROGRAM_ARGS): New variable.
936 (INSTALL_PROGRAM): Use $(INSTALL_PROGRAM_ARGS).
937 (INSTALL_SCRIPT): New variable.
938 (BASE_FLAGS_TO_PASS): Pass down INSTALL_SCRIPT.
939 * configure.in: If host is *-*-cygwin32*, set INSTALL_PROGRAM_ARGS
941 * install-sh: Add support for -x option.
945 * configure.in, Makefile.in: Treat tix like itcl.
949 * Makefile.in (WINDRES): New variable.
950 (WINDRES_FOR_TARGET): New variable.
951 (BASE_FLAGS_TO_PASS): Add WINDRES_FOR_TARGET.
952 (EXTRA_HOST_FLAGS): Add WINDRES.
953 (EXTRA_TARGET_FLAGS): Add WINDRES.
954 (EXTRA_GCC_FLAGS): Add WINDRES.
955 ($(DO_X)): Pass down WINDRES.
956 ($(CONFIGURE_TARGET_MODULES)): Set WINDRES when configuring.
957 * configure: Treat WINDRES like DLLTOOL, and WINDRES_FOR_TARGET like
962 * configure.in: configure sim before gdb for win32-x-ppc
966 Move gperf into the toplevel, from libg++.
967 * configure.in (target_tools): Add target-gperf.
968 (native_only): Add target-gperf.
969 * Makefile.in (all-target-gperf): New target, depend on
971 (configure-target-gperf): Empty rule.
972 (ALL_TARGET_MODULES): Add all-target-gperf.
973 (CONFIGURE_TARGET_MODULES): Add configure-target-gperf.
974 (CHECK_TARGET_MODULES): Add check-target-gperf.
975 (INSTALL_TARGET_MODULES): Add install-target-gperf.
976 (CLEAN_TARGET_MODULES): Add clean-target-gperf.
980 * config.sub (mn10200): Recognize new basic machine.
984 * configure.in: Don't set ENABLE_MULTILIB, so we'll be passing
985 --enable-multilib down to subdirs; setting TARGET_SUBDIR was enough.
989 * configure.in: If we're building mips-sgi-irix6* native, turn on
990 ENABLE_MULTILIB and set TARGET_SUBDIR.
994 * Makefile.in (all-sn): Depend on all-grep.
998 * configure.in: Use mh-ppcpic and mt-ppcpic for powerpc*-* targets.
1000 * configure: Set CFLAGS and CXXFLAGS, and substitute them into
1002 * Makefile.in: Add comment for CFLAGS and CXXFLAGS.
1004 * Makefile.in (DISTBISONFILES): Remove.
1005 (taz): Don't futz with DISTBISONFILES. Change BISON to use
1008 * configure.in: Build itl, db, sn, etc., when building for native
1011 * Makefile.in (LD): New variable.
1012 (EXTRA_HOST_FLAGS): Pass down LD.
1013 ($(DO_X)): Likewise.
1017 * Makefile.in (INSTALL): Use $(SHELL) when executing install-sh.
1021 * configure.in (targargs): Strip out any supplied --build argument
1022 before adding our own. Always add --build.
1026 * configure.in (targargs): Pass --build if we're doing
1031 * configure: Use '|' instead of ":" as the seperator in
1032 sed. Otherwise sed chokes on NT path names with drive
1033 designators. Also look for "?:*" as the leading characters in an
1038 * config.sub: Support for r3900.
1042 * configure.in: Use install-sh, not install.sh.
1046 * Makefile.in (taz): Improve check for BISON so it doesn't try to
1051 * Makefile.in (INSTALL_MODULES): Put install-opcodes before
1056 * Makefile.in: Add automake targets.
1057 * configure.in (host_tools): Add automake.
1062 * Makefile.in (all-libide): Depend upon all-ilu.
1067 * configure: Default CXX to c++, not gcc.
1068 * Makefile.in (CXX): Set to c++, not gcc.
1069 (CXX_FOR_TARGET): When cross, transform c++, not gcc.
1074 * Makefile.in: Add ILU targets.
1075 * configure.in (host_tools): Add ILU.
1080 * install-sh: try appending a .exe if source file doesn't
1085 * configure.in: Turn on multilib by default.
1086 (cross_only): Remove target-libiberty.
1088 * Makefile.in (all-gcc): Don't depend on libiberty.
1093 * configure.in (host_tools): Added vmake.
1098 * config.guess: improve algorithm for recognizing Gnu Hurd x86.
1102 * Makefile.in (DEVO_SUPPORT): Add mpw-install.
1103 (DISTBISONFILES): Add ld/Makefile.in
1107 * configure.in: if target is cygwin32 but host isn't cygwin32,
1108 don't configure gdb tcl tk expect, not just gdb.
1112 * configure.in: Added gnuserv everywhere sn appears.
1114 * Makefile.in (ALL_MODULES): Added all-gnuserv.
1115 (CROSS_CHECK_MODULES): Added check-gnuserv.
1116 (INSTALL_MODULES): Added install-gnuserv.
1117 (CLEAN_MODULES): Added clean-gnuserv.
1118 (all-gnuserv): New target.
1123 * configure.in (host_libs): Added libide.
1124 Skip libide, vmake if no X. Also skip these everywhere that sn is
1127 * Makefile.in (ALL_MODULES): Added all-vmake, all-libide.
1128 (CROSS_CHECK_MODULES): Added check-vmake, check-libide.
1129 (INSTALL_MODULES): Added install-vmake, install-libide.
1130 (CLEAN_MODULES): Added clean-vmake, clean-libide.
1131 (all-vmake, all-libide): New targets.
1136 * config.guess: Fixes for MIPS OpenBSD systems.
1140 * Makefile.in (INSTALL_XFORM): Remove.
1141 (BASE_FLAGS_TO_PASS): Remove INSTALL_XFORM.
1143 * mkinstalldirs: New file, copied from automake.
1144 * Makefile.in (installdirs): Rename from install-dirs. Use
1145 mkinstalldirs. Change all users.
1146 (DEVO_SUPPORT): Add mkinstalldirs.
1150 * install-sh: Rename from install.sh.
1151 * Makefile.in (INSTALL): Change install.sh to install-sh.
1152 (DEVO_SUPPORT): Likewise.
1154 * configure: Use ${config_shell} with ${moveifchange}. From Thomas
1159 * config.guess: Recognize OpenBSD systems correctly.
1163 * README, Makefile.in (ETC_SUPPORT): Remove references to
1164 cfg-paper*, configure.{texi,man,info*}._
1168 * Makefile.in (all.normal): Ensure that gcc is built after all
1169 the x11 - ie gdb - targets.
1173 * makefile.vms: Don't run conf-a-gas.
1177 * configure.in (hppa1.1-*-rtems*): New target, like hppa-*-*elf*.
1179 start-sanitize-tic80
1182 * configure.in: Remove noconfigdirs case since gdb also
1183 configures and builds for tic80-coff.
1188 * configure: Set cache_file to config.cache.
1189 * Makefile.in (local-distclean): Remove config.cache.
1193 * COPYING: Update FSF address.
1195 start-sanitize-tic80
1198 * configure.in (tic80-*-*): Remove G++ libraries and libgloss from
1204 * Makefile.in (install-dirs): Don't crash if prefix, and hence
1209 * config.sub: Tweak mn10300 entry.
1213 * configure.in (host_tools): Put sim before gdb, so gdb's
1214 configure.tgt can determine if the simulator was configured.
1218 * config.sub: Move BeOS $os case to be with other Cygnus
1223 * config.sub: Remove misplaced comment that broke Linux.
1227 * config.sub: Add BeOS support.
1231 * Makefile.in (CHECK_X11_MODULES): Don't run check-tk.
1235 * configure.in (noconfigdirs): Remove tcl and tk from
1236 noconfigdirs for cygwin32 builds.
1238 start-sanitize-tic80
1241 * configure.in (tic80-*-*): Remove ld from noconfigdirs.
1246 * Makefile.in (GAS_SUPPORT_DIRS, BINUTILS_SUPPORT_DIRS): Remove
1247 make-all.com, use makefile.vms instead.
1251 * config.sub: Accept -lnews*.
1256 * configure.in (noconfigdirs): Disable target-newlib,
1257 target-examples and target-libiberty for d30v.
1260 start-sanitize-tic80
1263 * configure.in (host_libs): Build itcl after tcl, tk.
1265 * configure.in (host_libs): Added db, itcl.
1266 (host_tools): Added sn.
1267 (noconfigdirs): Added itcl, db, sn in appropriate places.
1268 (native_only): Added sn.
1270 * Makefile.in (all-db, all-sn): New targets.
1271 (ALL_MODULES): Added all-sn.
1272 (CROSS_CHECK_MODULES): Added check-sn.
1273 (INSTALL_MODULES): Added install-sn.
1274 (CLEAN_MODULES): Added clean-sn.
1280 * configure.in (noconfigdirs): Enable ld for d30v.
1283 start-sanitize-tic80
1286 * configure.in (tic80-*-*): Build compiler.
1292 * configure.in (d30v-*): Remove sim directory from list of
1293 unsupported d30v directories
1299 * config.sub, configure.in: Add d30v target cpu.
1304 * makefile.vms: New file.
1305 * make-all.com: Remove.
1309 * Makefile.in (EXTRA_GCC_FLAGS): Add LIBGCC2_DEBUG_CFLAGS.
1311 start-sanitize-r5900
1314 * config.sub, configure.in: add r5900
1319 * Makefile.in (all-itcl): The rule is all-itcl, not all-tcl.
1323 * Makefile.in (ALL_MODULES): Added all-db.
1324 (CROSS_CHECK_MODULES): Addec check-db.
1325 (INSTALL_MODULES): Added install-db.
1326 (CLEAN_MODULES): Added clean-db.
1330 * config.guess: Merge with latest FSF sources.
1334 * Makefile.in (ALL_MODULES): Added all-itcl.
1335 (CROSS_CHECK_MODULES): Added check-itcl.
1336 (INSTALL_MODULES): Added install-itcl.
1337 (CLEAN_MODULES): Added clean-itcl.
1341 * configure.in: build gdb for mn10200
1345 * Makefile.in (all-target-winsup): Depend on all-target-libio.
1347 start-sanitize-tic80
1350 * configure.in (tic80-*-*): Turn off most targets right now.
1355 * Makefile.in (MAKEINFO): Check for the existence of the Makefile,
1356 rather than the makeinfo program.
1357 (do-info): Depend upon all-texinfo.
1361 * configure.in: Remove uses of config/mh-linux.
1363 * config.sub, config.guess: Merge with latest FSF sources.
1365 start-sanitize-tic80
1368 * config.sub (case $basic_machine): Add tic80 entries.
1373 * config.sub, config.guess: Merge with latest FSF sources.
1377 * mpw-build.in: Build ld before gcc, use NewFolderRecursive.
1378 * mpw-config.in: Test for NewFolderRecursive.
1379 * mpw-install: Use symbolic name for startup filename.
1380 * mpw-README: Add various additional details.
1384 * configure.in (mips*-sgi-irix6*): Remove binutils from noconfigdirs.
1388 * configure.in: Do build gcc and the target libraries for
1393 * configure.in: don't avoid building gdb for mn10300 any more
1394 * Makefile.in: double-quote GCC_FOR_TARGET line in EXTRA_GCC_FLAGS
1395 instead of single-quoting it.
1399 * configure.in: Don't use --with-stabs on IRIX 6.
1403 * configure.in (m32r): Build gdb, libg++ now.
1407 * configure.in (mips*-sgi-irix6*): Remove gdb and related
1408 directories from noconfigdirs.
1412 * config.sub (basic_machine): added mips16 configuration
1416 * config.sub: Handle d10v-unknown.
1420 * gcc/depragmaize.c: Handle MSDOS's (non-unix) text files.
1424 * config.sub: Handle v850-unknown.
1428 * Makefile.in: add findutils
1429 * configure.in: add findutils to list of host_tools
1433 * config.sub: Handle mn10200 and mn10300.
1437 * configure.in (d10v-*): Do not build librx.
1441 * configure.in (mn10300): Build everything except gdb & libgloss.
1445 * config.guess: Patch for Dansk Data Elektronik servers,
1448 For ncr, use /bin/uname rather than uname, since GNU uname does not
1451 Patch for MIPS R4000 running System V,
1454 Fix thinko for nextstep.
1459 * config.guess: Guess mips-dec-mach_bsd4.3.
1462 * config.guess (i?86-ncr-sysv*): Emit just enough of the minor
1464 * config.guess (mips-mips-riscos*): Emit just enough of the
1468 * config.guess (sparc-auspex-sunos*): Added.
1469 (f300-fujitsu-*): Added.
1472 * config.guess: Recognize a Tadpole as a sparc.
1476 * config.guess: Don't assume that NextStep version is either 2 or
1477 3. NextStep 4 (aka OpenStep 4) has come out now.
1481 * config.guess: Support Cray T90 that reports itself as "CRAY TS".
1486 * config.sub: Contributions from bug-gnu-utils to:
1487 Support plain "hppa" (no version given) architecture, reported by
1489 OpenBSD like NetBSD.
1490 LynxOs is not a hardware supplier.
1492 * config.guess: Contributions from bug-gnu-utils to add support for:
1493 OpenBSD like NetBSD.
1495 More Pyramid systems.
1496 i[n>4]86 Intel chips.
1497 M680[n>4]0 Motorola chips.
1498 Use unknown instead of lynx for hardware manufacturer.
1502 * install.sh (chmodcmd): Set to null if the DST directory already
1507 * configure.in (powerpc*-{eabi,elf,linux,rtem,sysv,solaris}*): Do
1508 not use mt-ppc target Makefile fragment any more.
1512 * configure.in (*-*-windows): Exclude everything but those dirs
1513 needed to build windows.
1517 * Makefile.in (all-target-winsup): Depend on all-target-librx.
1521 * configure.in: Exclude mmalloc from i386-windows.
1522 * config/mh-windows: Add rules for building MSVC makefiles.
1526 * Undo my previous change.
1530 * Makefile.in (EXTRA_GCC_FLAGS): Pass down GCC_FOR_TARGET
1532 (MAKEOVERRIDES): Define (revert this part of October 18 change).
1536 * Makefile.in (FLAGS_TO_PASS): Add $(HOST_FLAGS) to allow the
1537 host to add it's own flags.
1538 * config/mh-windows (HOST_FLAGS): Set srcroot, which is needed
1539 for MSVC build procedure.
1543 * configure: Handle GCC_FOR_TARGET like CC_FOR_TARGET.
1547 * Makefile.in (CC_FOR_TARGET): Check for xgcc, not Makefile.
1548 (CXX_FOR_TARGET): Likewise.
1549 (GCC_FOR_TARGET): Define.
1550 (BASE_FLAGS_TO_PASS): Remove GCC_FOR_TARGET.
1551 (EXTRA_GCC_FLAGS): Define GCC_FOR_TARGET based on whether
1552 CC_FOR_TARGET was specified on the command line.
1553 (MAKEOVERRIDES): Don't define.
1557 * configure.in (m32r): Fix spelling of libg++ libs.
1561 * config.sub (-apple*): Remove, now redundant.
1565 * configure: Don't get confused by CPU-VENDOR-linux-gnu.
1567 * configure: Rework yesterday's sed script patch.
1569 * config.sub: Merge with FSF.
1573 * config.guess: Merge from FSF.
1576 * config.guess: Use pc instead of unknown, for pc clone systems.
1577 Change linux to linux-gnu.
1580 * config.guess: Avoid non-portable tr syntax.
1584 * test-build.mk (HOLES): Add "xargs" for gdb.
1586 * configure: Avoid hpux10.20 sed bug.
1590 * configure.in config/mh-windows: Add support for windows host
1591 (that is a build done under the Microsoft build environment).
1595 * Makefile.in: Replace all uses of srcroot with s, to shrink
1596 command line lengths.
1599 * configure.in: If configuring for newlib, pass --with-newlib to
1601 * Makefile.in (CC_FOR_TARGET): If winsup/Makefile exists, pass a
1602 -Bnewlib/ and -Lwinsup to gcc.
1603 (CXX_FOR_TARGET): Likewise.
1607 * Makefile.in (ETC_SUPPORT): Add configure.
1611 * configure.in: Use config/mh-dgux386 for i[345]86-dg-dgux
1612 host configuration file.
1616 * configure.in: Break mn10x00 support into separate
1617 mn10200 and mn10300 configurations.
1618 * config.sub: Likewise.
1622 * configure.in: Add lots of stuff to noconfigdirs for
1623 the mn10x00 targets.
1625 * config.sub, configure.in: Add mn10x00 support.
1629 * make-all.com: Call conf-a-gas, not config-a-gas.
1633 * configure.in (noconfigdirs): Don't build libgloss for arm-coff
1638 * mpw-README: Add much more detail for native PowerMac.
1639 * mpw-install: New file.
1640 * mpw-configure: Add --norecursion and --help options.
1641 * mpw-config.in: Translate readme and install files when
1643 * mpw-build.in: Don't always depend on byacc and flex.
1644 (install-only-top): New action.
1648 * configure.in: You can now configure GDB for the v850.
1652 * configure.in (noconfigdirs): Don't configure any C++ dirs
1657 * config.sub: Recognize mips64vr5000.
1661 * configure.in: Use a single line for host_tools and native_only.
1665 * config.sub, configure.in: Add entries for m32r.
1669 * Makefile.in (inet-install): Don't run install-gzip.
1673 * configure.in: Don't config lots of things for *-*-windows*.
1677 * mpw-config.in: Test for mpw-true, true, and null-command scripts.
1678 (host_libs, host_tools): Copy from configure.in.
1679 * mpw-configure: Don't complain about directories not found.
1683 * configure.in (i[345]86): Recognize i686 for pentium pro.
1684 (i[3456]86-*-dgux*): Use config/mh-sysv for the host configuration
1687 * config.guess (i[345]86): Ditto.
1691 * configure.in (noconfigdirs): Removed gdb for D10V.
1695 * configure.in: Remove ld, target-libio, target-libg++, and
1696 target-libstdc++ from noconfigdirs.
1700 * configure: Fix three locations where shell scripts were
1701 being run directly rather than with config_shell.
1705 * configure.in (v850-*-*): Set up initial $noconfigdirs.
1706 * config.sub (basic_machine): Recognize v850.
1710 * mpw-configure: Handle multiple enable/disable options and
1711 pass them down recursively, handle -c and -s flags appropriately
1712 depending on choice of compiler, add escape mechanism for
1713 quoted arguments to gC.
1717 * configure.in (powerpc*-*-*): For eabi, system V.4, Linux, and
1718 solaris targets, use config/mt-ppc to set C{,XX}FLAGS_FOR_TARGETS
1719 so that -mrelocatable-lib and -mno-eabi are used.
1721 * Makefile.in (CONFIGURE_TARGET_MODULES): If target compiler does
1722 not support --print-multi-lib, don't abort.
1726 * config/mh-cygwin32 (CFLAGS): Define _WIN32 to be compatible
1727 with normal Windows compilation environment.
1731 * make-all.com: Run config-a-gas.
1732 * setup.com: Don't copy subdirectory files around.
1736 * configure.in (*-*-ose): Remove exclusion of libgloss for this
1737 target, it now compiles correctly.
1741 * mpw-config.in: Generate Mac include for elf/dwarf2.h.
1745 * configure.in (d10v-*-*): Remove ld from $noconfigdirs.
1749 * configure.in (native_only): Add prms.
1753 * Makefile.in (GAS_SUPPORT_DIRS): Add make-all.com and setup.com.
1754 (BINUTILS_SUPPORT_DIRS): Likewise.
1758 * configure.in (d10v-*-*): Don't configure ld or gdb until the
1759 d10v support is added.
1763 * configure.in (d10v-*-*): New target.
1767 * config.guess (HP 9000/811): Recognize this as a PA1.1
1772 * Makefile.in (do-tar-gz): New target, split out from tail end of
1773 taz target. Run each command separately, don't use pipes.
1778 * mpw-configure: Look for g-mpw-make.sed in config/mpw.
1779 * mpw-build.in: No builds should depend on building byacc or flex,
1780 they are assumed to be installed already.
1784 * Makefile.in (CONFIGURE_TARGET_MODULES): Set r environment
1785 variable that CC_FOR_TARGET needs.
1789 * Makefile.in (CONFIGURE_TARGET_MODULES): Determine if the multlib
1790 options have changed since the last time the subdirectory was
1791 configured, and if it has, reconfigure.
1792 (CLEAN_TARGET_MODULES): Delete multilib.out and tmpmulti.out, which
1793 CONFIGURE_TARGET_MODULES uses to remember the old multilib options.
1797 * Makefile.in (ALL_MODULES,CROSS_CHECK_MODULES,INSTALL_MODULES,
1798 CLEAN_MODULES): Add bash.
1799 (all-bash): New target.
1803 * configure.in (mips-sgi-irix6*): Use mh-irix6 instead of mh-irix5.
1807 * config.sub (basic_machine): Recognize d10v as a valid processor.
1811 * mpw-configure: Add support for --bindir.
1812 * mpw-build.in: Use a GCC-specific build script for GCC actions.
1816 * configure.in: add bash, time, gawk to list of hosttools and things
1817 to only build for native toolchains
1821 * Makefile.in (docdir): Remove.
1825 * Makefile.in (datadir): Set to $(prefix)/share.
1829 * configure.in: build diff and patch for cygwin32-hosted
1834 * config.sub: Accept -rtems*.
1838 * configure.in: enable dosrel for cygwin32-hosted builds,
1839 remove diff from the list of things not buildable
1844 * Makefile.in (TARGET_SUBDIR): Move comment to previous line so we
1849 * configure.in (mips*-sgi-irix6*): Set noconfigdirs appropriately.
1853 * Makefile.in (taz): Handle case where tex3patch didn't even get
1854 checked out. Also, if it was found, put the symlink in a new util
1859 * config.guess (*:Linux:*:*): Add support for PowerPC Linux.
1863 * config.sub: Recognize -openvms.
1864 * configure.in (alpha*-*-*vms*): Set noconfigdirs.
1865 * make-all.com, setup.com: New files.
1869 * Makefile.in (taz): tex3patch moved to texinfo/util.
1873 start-sanitize-gdbtk
1874 * configure: enable_gdbtk=no for cygwin32-hosted toolchains
1876 * configure.in: remove make from disable-if-Can-Cross list
1877 enable gdb if ${host} and ${target} are cygwin32
1881 * config.guess (i?86-ncr-sysv*): Emit minor release numbers.
1882 Recognize the NCR 4850 machine and NCR Pentium-based platforms.
1886 * config.guess: Combine mips-mips-riscos cases, and use cpp to
1887 distinguish sysv/svr4/bsd variants.
1892 * configure.in: Added copyright notice.
1893 * move-if-change: Added copyright notice.
1897 * configure.in (powerpcle-*-solaris*): Until we get shared
1898 libraries working, don't build gdb, sim, make, tcl, tk, or
1903 * config.guess: Merge with FSF:
1906 * config.guess (*:Linux:*:*): Add guess for sparc-unknown-linux.
1909 * config.guess (AViiON:dgux:*:*): Fix typo in recognizing mc88110.
1912 * config.guess: Combine two OSF1 rules.
1914 * config.guess (dgux): Use /usr/bin/uname rather than uname,
1919 * Makefile.in (MAKEDIRS): Removed $(tooldir).
1923 * mpw-README: Document GCCIncludes.
1927 * configure.in (alpha-*-linux*): Set enable_shared to yes.
1931 * mpw-configure: Handle --enable-FOO and --disable-FOO.
1935 * configure.in (*-*-cygwin32): Configure make.
1939 * Makefile.in (inet-install): Quote value of INSTALL_MODULES.
1943 * Makefile.in (all-inet): Depend on all-perl.
1945 * Makefile.in (inet-install): New target.
1947 * Makefile.in (all-inet): Depend on all-tcl.
1948 (all-inet): Depend on all-send-pr.
1952 * configure.in (powerpcle-*-solaris*): Turn off tk and tcl
1957 * configure.in: Don't configure --with-gnu-ld on AIX.
1961 * configure.in (powerpcle-*-solaris*): Turn off gdb temporarily.
1965 * Makefile.in (ALL_MODULES): Added all-inet.
1966 (CROSS_CHECK_MODULES): Added check-inet.
1967 (INSTALL_MODULES): Added install-inet.
1968 (CLEAN_MODULES): Added clean-inet.
1969 (all-indent): New target.
1971 * configure.in (host_tools): Added inet.
1972 (native_only): Added inet.
1973 (noconfigdirs): Added inet.
1977 * configure.in: Don't configure libgloss if we are not configuring
1982 * configure.in: Don't configure libgloss for unsupported
1987 * Makefile.in (CLEAN_MODULES): Add clean-apache.
1991 * Makefile.in (ALL_MODULES): Include all-apache.
1992 (CROSS_CHECK_MODULES): Include check-apache.
1993 (INSTALL_MODULES): Include install-apache.
1994 (all-apache): New target.
1996 * configure.in: Added apache everywhere perl is seen.
2000 * Makefile.in: Add support for clean-{module} and
2001 clean-target-{module} rules.
2005 * configure.in (*-*-ose) do not build libgloss.
2009 * config.guess (prep*:SunOS:5.*:*): Turn into
2010 powerpele-unknown-solaris2.
2014 * configure.in: Permit --enable-shared to specify a list of
2019 * configure.in (host==solaris): Pass only the first word of $CC
2020 to /usr/bin/which when checking if we're using /usr/ccs/bin/cc.
2024 * Makefile.in (BASE_FLAGS_TO_PASS): pass down $(MAKE).
2028 * Makefile.in (ALL_MODULES): Include all-perl.
2029 (CROSS_CHECK_MODULES): Include check-perl.
2030 (INSTALL_MODULES): Include install-perl.
2031 (ALL_X11_MODULES): Include all-guile.
2032 (CHECK_X11_MODULES): Include check-guile.
2033 (INSTALL_X11_MODULES): Include install-guile.
2034 (all-perl): New target.
2035 (all-guile): New target.
2037 * configure.in (host_tools): Include perl and guile.
2038 (native_only): Include perl and guile.
2039 (noconfigdirs): Don't build guile and perl; no ports have been
2044 * configure (--enable-*): Handle quoted option lists such as
2045 --enable-sim-cflags='-g0 -O' better.
2049 * Makefile.in ({,inst}all-target): New rule so we can make and
2050 install all of the target directories easily.
2054 * configure.in: Add missing global flag in sed substitution when
2055 deleting `target-' from ${configdirs}.
2059 * Makefile.in (DO_X): Don't get confused if CC contains `=' in an
2062 * configure.in (mips*-nec-sysvr4*): Use a host_makefile_frag of
2065 * install.sh: Correct misspelling of transformbasename.
2067 * config.guess: Recognize mips-*-sysv*.
2071 * config.sub: Recognize mon960.
2075 * configure: Restore Canadian Cross handling of BISON and LEX,
2076 removed in Feb 20 change.
2081 Mention make install. Remove the old copyright date as well the
2082 clumsy and rather pointless copyright on the README file.
2086 * Makefile.in ($(CONFIGURE_TARGET_MODULES)): If there is a
2087 Makefile after running symlink-tree, then run `make distclean' to
2088 avoid clobbering any generated files in srcdir.
2092 * configure.in (m68k-*-netbsd*): Build everything now.
2096 * Makefile.in (taz): Fix quoting.
2100 * configure.in (sparclet-*-*): Build everything now.
2104 * configure.in (m68k-*-linux*): New host.
2108 * configure: Check for bison before byacc.
2112 * Makefile.in configure: Change the way LEX and BISON/YACC are
2113 set. configure now defines DEFAULT_LEX and DEFAULT_YACC by
2114 searching PATH. These are used as fallbacks by Makefile.in if
2115 flex/bison/byacc aren't in objdir.
2119 * Makefile.in: Make everything which depends upon all-bfd also
2120 depend upon all-opcodes, in case --with-commonbfdlib is used.
2124 * configure.in (host *-*-cygwin32): Don't build gdb if we are
2125 building NT native compilers on Unix.
2129 * configure.in: Don't get CC from the host Makefile fragment if we
2130 can find gcc in PATH, or if this is a Canadian Cross. Move the
2131 Solaris test for /usr/ucb/cc to the post target script, just after
2132 the compiler sanity test.
2136 * config.sub: Merge with FSF.
2140 * Makefile.in (RPATH_ENVVAR): New variable.
2141 (REALLY_SET_LIB_PATH): Use it.
2142 * configure.in: On HP/UX, set RPATH_ENVVAR to SHLIB_PATH.
2146 * config.sub, configure.in: Recognize sparclet cpu.
2150 * config.guess: Support m68k-cbm-sysv4.
2154 * config.guess (*:Linux:*:*): Guess m68k-unknown-linux and
2155 m68k-unknown-linuxaout from linker help string. Put quotes around
2160 * config.guess (powerpc-harris-powerunix): Add guess for port
2165 * config.guess (UNAME_VERSION): Recognize X4.x as an OSF version.
2169 * configure.in: If --enable-shared was used, set SET_LIB_PATH to
2170 $(REALLY_SET_LIB_PATH) in Makefile.
2171 * Makefile.in (SET_LIB_PATH): New variable.
2172 (REALLY_SET_LIB_PATH): New variable.
2173 ($(DO_X)): Use $(SET_LIB_PATH).
2174 (install.all, gcc-no-fixedincludes, $(ALL_MODULES)): Likewise.
2175 ($(NATIVE_CHECK_MODULES), $(CROSS_CHECK_MODULES)): Likewise.
2176 ($(INSTALL_MODULES), $(CONFIGURE_TARGET_MODULES)): Likewise.
2177 ($(ALL_TARGET_MODULES), $(CHECK_TARGET_MODULES)): Likewise.
2178 ($(INSTALL_TARGET_MODULES), $(ALL_X11_MODULES)): Likewise.
2179 ($(CHECK_X11_MODULES), $(INSTALL_X11_MODULES)): Likewise.
2180 (all-gcc, all-bootstrap, check-gcc, install-gcc): Likewise.
2181 (install-dosrel): Likewise.
2182 (all-opcodes): Depend upon all-libiberty.
2186 * config.guess (*:CYGWIN*): New
2190 * Makefile.in (all-target-winsup): All all-target-libiberty.
2194 * configure.in (noconfigdirs): Add missing # in front of comment.
2198 * configure.in: add second pass to things added to noconfigdirs
2199 so *-gm-magic can exclude libgloss properly.
2203 * mpw-configure (extralibs_name, rez_name): Set correctly
2204 for MWC68K compiler.
2206 * mpw-README: Add more info on the necessary build tools.
2210 * configure.in, config.sub: Recognize cygwin32.
2214 * config.guess, config.sub: Recognize A/UX.
2218 * config.sub: Merge with gcc/config.sub.
2222 * mpw-build.in (do-binutils): Add build of stamps.
2226 * config.sub: Add recognition for mips64vr4100*-* targets.
2230 * test-build.mk: Add checking of `hpux9' rather than just `hpux'.
2231 Add creation of gconfigargs with `--enable-shared' turned on.
2232 ($(host)-stamp-stage2-configured): Pass $(gconfigargs).
2233 ($(host)-stamp-stage3-configured): Likewise.
2234 (HOLES): Add chatr and ldd.
2235 (i386-ncr-sysv4.3*): Add use of /usr/ccs/bin in the PATH and HOLE_DIRS.
2239 * configure: Pass --nfp to recursive configures.
2243 * Makefile.in (DLLTOOL): New.
2244 (DLLTOOL_FOR_TARGET): New.
2245 (EXTRA_HOST_FLAGS): Pass down DLLTOOL.
2246 (EXTRA_TARGET_FLAGS): Ditto.
2247 (EXTRA_GCC_FLAGS): Ditto.
2248 (CONFIGURE_TARGET_MODULES): Ditto.
2250 * configure: Add DLLTOOL.
2255 * configure.in (i[345]86-*-sco3.2v5*): Use mh-sysv instead of
2256 mh-sco, since old workarounds no longer needed, and don't
2257 build ld, since libraries have weak symbols in COFF.
2261 * Makefile.in (CONFIGURE_TARGET_MODULES): Add missing ';'.
2265 * configure.in: Make sure that ${CC} can be used to compile an
2268 start-sanitize-gdbtk
2271 * Makefile.in (all-gdb): Depend on $(GDB_TK).
2272 * configure (GDB_TK): Set GDB_TK to either "all-tcl all-tk" or
2273 nothing depending on whether gdbtk is being built.
2278 * Makefile.in (newlib.tar.gz): Delete building of newlib's info files.
2282 * configure.in (noconfigdirs): Put ld or gas in this early, if the
2283 user specifically used --with-gnu-ld=no or --with-gnu-as=no.
2287 * config-ml.in: Add support for
2288 --disable-{softfloat,m68881,m68000,m68020} on m68*-*-*.
2289 Simplify setting of multidirs from --disable-foo.
2293 * Makefile.in (EXTRA_GCC_FLAGS): If any of the make variables
2294 LANGUAGES, BOOT_CFLAGS, STMP_FIXPROTO, LIMITS_H_TEST,
2295 LIBGCC1_TEST, LIBGCC2_CFLAGS, LIBGCC2_INCLUDES, and ENQUIRE are
2296 non-empty, pass them on to the GCC make.
2297 (all-bootstrap): New rule that is like all-gcc, except it executes
2298 the GCC bootstrap rule instead of the GCC all rule.
2302 * config-ml.in (ml_realsrcdir): New, to account for ${subdir}.
2306 * config.guess (AViiON:dgux:*:*): Update from FSF to add pentium
2311 * config.sub (i*86*) Change [345] to [3456]
2315 * configure.in (noconfigdirs): Add gas or ld if --with-gnu-as=no or
2320 * config-ml.in (rs6000*, powerpc*): Add switches to control which
2321 AIX multilibs get built.
2325 * configure.in (i386-win32): Don't build expect if we're not
2326 building the tcl subdir.
2330 * Makefile.in: (configure-target-examples, all-target-examples):
2331 New targets, configure and build example programs.
2335 * mpw-configure: If an mpw-config.in generated a file mk.sed,
2336 use it as input to sedit the generated MPW makefile.
2337 * mpw-README: Add a suggestion about Gestalt.h.
2341 * config.sub: Accept *-*-ieee*.
2345 * Makefile.in (local-distclean): Remove $(TARGET_SUBDIR). From
2350 * configure.in (host==powerpc-pe): Add many directories to noconfigdirs
2351 for powerpc-pe native.
2352 (target==i386-win32): add tcl, make to noconfigdirs if canadian cross.
2353 (target==powerpc-pe): duplicate i386-win32 entry.
2357 * configure.in (noconfigdirs): Exclude target-newlib for all versions
2358 of vxworks, not just vxworks5.1.
2362 * mpw-configure: Add support for exec-prefix.
2366 * config.guess: Recognize HP model 816 machines as having
2371 * configure: Ignore new autoconf configure options.
2375 * config/mt-v810 (CC_FOR_TARGET): Add -ansi flag. NEC compiler
2376 defaults to K&R mode, but doesn't have varargs.h, so we have to
2377 compile in ANSI mode.
2381 * config.guess: Recognize Pentium under SCO.
2386 * configure.in (noconfigdirs): Disable target-libio on v810-*-*.
2387 * config/mt-v810 (CC_FOR_TARGET, AS_FOR_TARGET, AR_FOR_TARGET,
2388 RANLIB_FOR_TARGET): Set as appropriate for NEC v810 toolchain.
2392 * configure.in: Don't configure gas for alpha-dec-osf*.
2396 * configure.in: Default to --with-stabs for some targets for which
2397 it makes sense: mips*-*-*, alpha*-*-osf*, i[345]86*-*-sysv4* and
2398 i[345]86*-*-unixware*.
2402 * config-ml.in: Get list of multidirs using gcc --print-multi-lib
2403 rather than basing it on the target. Simplify handling of options
2404 controlling which directories to configure. Remove extraneous
2405 slash in multi-clean target.
2409 * config-ml.in: Prefix more variables with ml_ so they don't collide
2414 * configure: Don't turn -v into --v.
2418 * configure.in (targargs): Fix typo.
2420 * Makefile.in (DEVO_SUPPORT): Add symlink-tree.
2424 * configure.in: Strip --host and --target options from
2425 CONFIG_ARGUMENTS, and always configure for --host only. Add
2426 --with-cross-host option when building with a cross-compiler.
2427 * configure: Canonicalize the arguments put into config.status by
2428 always using `=' for an option with an argument. Pass a presumed
2429 --host or --target explicitly.
2433 * config.sub: Merge -macos*, -magic*, -pe*, and -win32 cases
2434 into general OS recognition case.
2438 * configure.in (target_configdirs): add target-winsup only
2439 for win32 target systems.
2443 * Makefile.in (all-target-libgloss): Depend upon
2444 configure-target-newlib, since when libgloss is built it looks to
2445 see if the newlib directory exists.
2449 * Makefile.in (DEVO_SUPPORT): Use config-ml.in instead of
2454 * configure: Handle LD and LD_FOR_TARGET when configuring a
2459 * config/mh-i386win32: add LD_FOR_TARGET.
2463 * configure.in (target_libs): add target-winsup.
2464 (target==i386-win32): add patch diff flex make to $noconfigdirs.
2465 (target==ppcle-pe): remove ld from $noconfigdirs.
2469 * Makefile.in (CONFIGURE_TARGET_MODULES): Pass --with-target-subdir.
2470 Preserve relative path names in $srcdir. Build symlink tree if
2471 configuring cross target dir and srcdir=. (= no VPATH support).
2472 (configure-target-libg++): Depend on configure-target-librx.
2473 * cfg-ml-com.in, cfg-ml-pos.in: Deleted.
2474 * config-ml.in: New file.
2475 * symlink-tree: New file.
2476 * configure: Ensure srcdir="." if that's what it is.
2480 * mpw-README: Clarify some phrasing, add notes about CodeWarrior
2481 includes and FLEX_SKELETON setting.
2482 * mpw-configure (--with-gnu-ld): New option, controls whether
2483 to use PPCLink or ld with PowerMac GCC.
2484 * mpw-build.in (all-grez, do-grez, install-grez): New targets.
2485 * mpw-config.in: Configure grez if targeting Mac.
2487 * config.sub: Accept pmac and pmac-mpw as names for PowerMacs,
2488 accept mpw and mac-mpw as names for m68k Macs, change macos7 to
2490 * configure.in: Configure grez resource compiler if targeting Mac.
2491 * Makefile.in (all-grez, install-grez): New targets.
2495 * configure: CXX defaults to gcc, not g++. If we find
2496 gcc in the path, set CC to gcc -O2.
2500 * configure: Default ${build} correctly. Avoid picking up extra
2501 spaces when reading CC and CXX from Makefile. When doing a
2502 Canadian Cross, use plausible default values for numerous
2504 * configure.in: When doing a Canadian Cross, don't try to
2505 configure tools whose configure script can't handle it.
2509 * cfg-ml-com.in (sh-*-*): Add m2 and ml/m2 to multidirs.
2513 * configure: Remove dubious bug reporting address.
2517 * Makefile.in ($(CONFIGURE_TARGET_MODULES)): If subdir has
2518 configure script, run that instead of this directory's configure.
2519 In either case, print a message that we're configuring the sub-dir.
2523 * configure.in: Before checking for the existence of various files,
2524 use sed to filter out "target-".
2528 * Makefile.in (DO_X): Split rule to decrease command line length
2530 (Philippe De Muyter).
2534 * Makefile.in (all-patch): depend on all-libiberty.
2538 * configure.in: If the only directory in target_configdirs which
2539 actually exists is libiberty, then set target_configdirs to empty,
2540 to avoid trying to build a target libiberty in a gas or gdb
2545 * configure.in (host_makefile_frag): Use m68k-sun-sunos* instead
2546 of m68k-sun-* when selecting mh-sun3 to avoid matching NetBSD/sun3
2551 * configure.in (copy_dirs): Use sys-include instead of include
2552 for --with-headers option.
2556 * Makefile.in, configure.in: Make winsup builds work with
2561 * configure.in: Build the linker on AIX.
2565 * Makefile.in (CC_FOR_TARGET, CXX_FOR_TARGET): Add $(TARGET_SUBDIR)
2570 * Makefile.in (all-gcc): Fix typo.
2574 * Makefile.in ($(CHECK_TARGET_MODULES)): Fix typo.
2578 * configure.in: Rename libFOO to target-libFOO, and xiberty
2579 to target-xiberty, to provide more flexibility.
2580 (target_subdir): Define. Create if cross.
2581 Set TARGET_SUBDIR in Makefile to ${target_subdir}.
2582 * Makefile.in: Rename all-libFOO -> all-target-libFOO, all-xiberty
2583 -> all-target-libiberty, configure-libFOO -> configure-target-libFOO,
2584 check-libFOO -> check-target-libFOO, etc.
2585 ($(DO_X)): Iterate over TARGET_CONFIGDIRS after SUBDIRS.
2586 ($(CONFIGURE_TARGET_MODULES), $(CHECK_TARGET_MODULES),
2587 $(ALL_TARGET_MODULES), $(INSTALL_TARGET_MODULES)): Update accordingly.
2588 (configure-target-XXX): Depend on $(ALL_GCC), not all-gcc, to
2589 allow ALL_GCC="" to only configure.
2590 (DEVO_SUPPORT): Add cfg-ml-com.in and cfg-ml-pos.in.
2591 (ETC_SUPPORT, ETC_SUPPORT_PFX): Merge; update 'taz' accordingly.
2592 (LIBGXX_SUPPORT_DIRS): Remove xiberty.
2596 * Makefile.in (taz): Build "info" in etc explicitly.
2600 * configure.in: Make sure that CC is undefined (as opposed to
2601 null) if toplevel/config/mh-{host} doesn't define it. Fixes a
2602 problem with autoconf trying to configure on a host without GCC.
2606 * mpw-configure: Set host alias from choice of host compiler,
2607 only use generic MPW Makefile sed if present, edit a file
2608 named "hacked_Makefile.in" instead of "Makefile.in" if present.
2609 * mpw-README: Add problem notes about CW6 and CW7.
2613 * Makefile.in (taz): Use ";" instead of ";;".
2617 * Makefile.in (taz): Grep for '^diststuff:' or '^info:' in
2618 sub-directory Makefiles, instead of using DISTSTUFFDIRS and
2620 (DISTSTUFFDIRS, DISTDOCDIRS): Removed - no longer used.
2621 (newlib.tar.gz): Don't pass DISTDOCDIRS to recursive make.
2625 * Makefile.in (DISTDOCDIRS): Remove ld gprof bnutils gas libg++ gdb
2626 and gnats, because they are now subsumed by DISTSTUFFDIRS.
2627 Move bfd to DISTSTUFFDIRS.
2631 * Makefile.in (X11_LIB): Removed.
2632 (X11_FLAGS_TO_PASS): pass only X11_EXTRA_CFLAGS and X11_EXTRA_LIBS.
2634 * configure.in (host_makefile_frag): mh-aix & mh-sun removed.
2638 * cfg-ml-com.in (powerpc*): Shorten some of the multilib directory
2643 * cfg-ml-com.in (powerpc*-eabi*): Add mcall-aixdesc varients.
2647 * configure.in (i[345]86-*-win32): Always build newlib.
2648 Don't configure cvs, autoconf or texinfo.
2649 * Makefile.in (LD_FOR_TARGET): New.
2650 (BASE_FLAGS_TO_PASS, EXTRA_TARGET_FLAGS, CONFIGURE_TARGET_MODULES):
2651 Pass down LD_FOR_TARGET.
2655 * winsup: New directory.
2656 * Makefile.in: Build winsup.
2657 * configure.in: Winsup is configured when target is win32.
2658 Can only build win32 target GDB when native.
2662 * config.guess: Recognize HP model 819 machines as having
2667 * configure: Fix sed loop which substitutes for CC and CXX to
2668 avoid bug found in various sed implementations.
2672 * cfg-ml-com.in (powerpc-*-eabisim): Delete separate rule for
2673 simulator. Use standard powerpc-*-eabi*.
2677 * configure.in: Stop putting gas and binutils in noconfigdirs for
2678 powerpc-*-aix* and rs6000-*-*.
2682 * cfg-ml-com.in (powerpc*-*-eabisim*): Add support for building
2683 -mcall-aixdesc libraries.
2689 * config.sub (arm | armel | armeb): Fix shell syntax.
2693 * cfg-ml-com.in ({powerpc,rs6000}-ibm-aix*): Add multilibs for
2694 -msoft-float and -mcpu=common support.
2695 (powerpc*-*-eabisim*): Add support for building -mcall-aix
2700 * configure.in: Allow configuration and build of emacs19 for the alpha.
2704 * configure.in (CC): Get ^CC, not just any old CC, from
2705 ${host_makefile_frag}.
2709 * configure.in (CC): Try to get CC from
2710 ${srcdir}/${host_makefile_frag}, not ${host_makefile_frag}.
2714 * Makefile.in (TARGET_CONFIGDIRS): configure targetdirs
2715 only if it exists in $(srcdir).
2719 * configure: If CC and CXX are not set in the environment, set
2720 them, based on either an existing Makefile or on searching for gcc
2721 in PATH. Substitute for CC and CXX in Makefile.
2722 * configure.in: Remove libm from target_libs. Separate
2723 target_configdirs from configdirs. If CC is not set in
2724 environment, try to get it from a host Makefile fragment. Rewrite
2725 changes of configdirs to use skipdirs instead. A few minor
2726 tweaks. Take directories out of target_configdirs as they are
2727 taken out of configdirs. Remove existing Makefile files from
2728 subdirectories. Substitute for TARGET_CONFIGDIRS and
2729 CONFIG_ARGUMENTS in Makefile.
2730 * Makefile.in (TARGET_CONFIGDIRS): New variable, automatically set
2732 (CONFIG_ARGUMENTS): Likewise.
2733 (CONFIGURE_TARGET_MODULES): New variable.
2734 ($(DO_X)): Loop over TARGET_CONFIGDIRS as well as SUBDIRS.
2735 ($(CONFIGURE_TARGET_MODULES)): New target.
2736 (configure-libg++, configure-libio): New targets.
2737 (all-libg++): Depend upon configure-libg++.
2738 (all-libio): Depend upon configure-libio.
2739 (configure-libgloss, all-libgloss): New targets.
2740 (configure-libstdc++): New target.
2741 (all-libstdc++): Depend upon configure-libstdc++.
2742 (configure-librx, all-librx): New targets.
2743 (configure-newlib): New target.
2744 (all-newlib): Depend upon configure-newlib
2745 (configure-xiberty): New target.
2746 (all-xiberty): Depend upon configure-xiberty.
2750 * configure.in (host i[345]86-*-win32): Expand the
2755 * mpw-configure: Fix sed command file name.
2759 * configure.in (host i[345]86-*-win32): Reduce the
2764 * configure.in: Don't configure ld and gdb for powerpc*-*-winnt*
2765 or powerpc*-*-pe*, since they are not yet supported.
2769 Add PowerMac support and many other enhancements.
2770 * mpw-configure: New option --cc to select compiler to use,
2771 paste options set according to --cc into the generated
2772 Makefile, generate the Makefile by sed'ing the Unix Makefile.in
2773 if mpw-make.sed is present.
2774 * mpw-config.in: Don't test for gC1, test for mpw-touch,
2775 add forward includes for PowerPC include files.
2776 * mpw-build.in: Build using Makefile.PPC if present.
2777 (do-byacc, etc): Remove separate version resource builds.
2778 (do-gas): Build "stamps" before "all".
2779 (do-gcc): Build "stamps-h" and "stamps-c" before "all".
2780 * mpw-README: Update to reflect --cc option, PowerMac support,
2781 and recently-reported compatibility problems.
2785 * cfg-ml-com.in (m68*-*-*): Only build multilibs for
2786 embedded m68k systems (-aout, -coff, -elf, -vxworks).
2787 (--with-multilib-top): Pass to recursive invocations.
2791 * configure.in (noconfigdirs): Disable libg++ and libstdc++ on
2796 * configure.in (noconfigdirs): Disable bfd, binutils, gas, gcc,
2797 gdb, ld and opcodes on v810-*-*.
2801 * config/mh-ncrsvr43: Removed AR_FLAGS
2805 * Makefile.in (DO_X): Change do-realclean to do-maintainer-clean.
2806 (local-maintainer-clean): New target.
2807 (maintainer-clean): New target.
2808 (realclean): Just depend upon maintainer-clean.
2812 * configure.in (noconfigdirs): Disable gdb on m68k-*-netbsd*.
2816 * configure.in: Build ld in mips*-*-bsd* case.
2820 * config.sub: Accept -lites* OS. From Ian Dall.
2824 * config.sub: recognise mips64vr4300 and mips64vr4300el as valid
2829 * configure.in: treat i386-win32 canadian cross the same as
2830 i386-go32 canadian cross.
2834 * cfg-ml-com.in (powerpc*-*-eabisim): Add support for PowerPC
2835 running under the simulator to build a reduced set of libraries.
2836 (powerpc-*-eabiaix): Add fine grained multilib support added to
2837 other powerpc targets yesterday.
2841 * cfg-ml-com.in (powerpc*): Add support for -disable-biendian,
2842 -disable-softfloat, -disable-relocatable, -disable-aix, and
2843 -disable-sysv to control which multilib libraries get built.
2847 * configure: Add Makefile.tem to list of files to remove in trap
2852 * config.guess (*Linux*): Add missing "exit"s.
2853 Also, need specific check for alpha-unknown-linux (uses COFF).
2857 * config.guess: Merge with FSF:
2860 * config.guess (AIX4): More robust release numbering discovery.
2863 * config.guess (i386-sequent-ptx): Properly get version number.
2866 * config.guess (mips:*:4*:UMIPS): New case.
2870 * configure.in (i386-go32 host): Fix typo (deja-gnu -> dejagnu).
2871 (i386-win32 host): Likewise. Don't build readline.
2873 start-sanitize-gdbtk
2876 * Makefile.in (GDBTK_SUPPORT_DIRS): Define and pass as part of
2877 SUPPORT_FILES to submakes.
2882 * Makefile.in (GDB_SUPPORT_DIRS): Add utils.
2883 (DEVO_SUPPORT): Add mpw-README, mpw-build.in, mpw-config.h and
2888 * configure.in (appdirs): Use =, not ==, in test expression when
2889 trying to build the text to print in the warning message for
2894 * cfg-ml-com.in (z8k-*-coff): Add 'std' multilib build.
2898 * config.guess: Recognize lynx-2.3.
2902 * config.sub (z8ksim): Deleted
2903 (z8k-*-coff): New, this is the one true name of the target.
2907 * cfg-ml-pos.in (dotdot): Work around SunOS sed bug.
2911 * config.guess (*:Linux:*:*): First try asking the linker what the
2912 default object file format is (elf, aout, or coff). Then if this
2913 fails, try previous methods.
2917 * configure.in: Don't build newlib for *-*-vxworks5.1.
2921 * configure.in: Don't build newlib for a29k-*-vxworks5.1.
2922 * test-build.mk: Add setting of --with-headers for a29k-vxworks5.1.
2926 * cfg-ml-pos.in (MULTITOP): Trim excess trailing "/.".
2930 * cfg-ml-com.in: New file.
2931 * cfg-ml-pos.in: New file.
2935 * COPYING.NEWLIB: Add HP free copyright to list.
2939 * config.sub: Recognize -eabi* for the system, not just -eabi.
2943 * Makfile.in (DLLTOOL_FOR_TARGET): New name, pass it down.
2944 * config.sub, configure.in (win32): New target and host.
2948 * configure.in: Add i386-pe configuration.
2952 * mpw-build.in (install): Install GDB after LD.
2956 * mpw-config.in (elf/mips.h): Always forward-include, needed
2961 * testsuite: New directory for customer acceptance and whole tool
2966 * configure: If per-host line isn't found, but AC_OUTPUT is found
2967 and a configure script exists, run it instead.
2971 * config.guess: Update from FSF, for alpha-dec-winnt3.5 and Crays.
2975 * configure: Set build_{cpu,vendor,os,alias} to host values when
2976 --build isn't specified.
2980 * Makefile.in (PICFLAG, PICFLAG_FOR_TARGET): New macros.
2981 (FLAGS_TO_PASS): Pass them.
2982 (EXTRA_TARGET_FLAGS): Ditto.
2984 * config/m?-*pic: Define PICFLAG* instead of LIB*FLAGS*.
2988 * Makefile.in (all-libg++): Depend on all-libstdc++.
2992 * configure.in (noconfigdirs): Enable all packages for
2993 i386-unknown-netbsd.
2997 * configure.in (noconfigdirs): Don't configure tk for i386-go32
2998 hosted builds (DOS builds)
3002 Changes for ARM based on patches from Richard Earnshaw:
3003 * config.sub: Handle armeb and armel.
3004 * configure.in: Omit arm linker only for riscix.
3008 * config.guess: Update from FSF.
3012 * config.sub: Recognize powerpcle as the little endian varient of
3013 the PowerPC. Recgonize ppc as a PowerPC variant, and ppcle as a
3014 powerpcle variant. Convert pentium into i586, not i486. Add p5
3015 alias for i586. Map new x86 variants p6, k5, nexgen into i586
3020 * configure.in (hppa*-*-lites*): Treat like hppa*-*-*elf*.
3024 * config.sub: Accept -lites* as a basic system type.
3028 * config.guess (*:Linux:*:*): Check for whether the pre-BFD linker is
3029 installed, and if so return linuxoldld as the system name.
3033 * config.guess: Add hppa1.1-hp-lites support.
3037 * configure.in: Don't build newlib for m68k-vxworks5.1.
3041 * configure.in (mips-sgi-irix6): Use mh-irix5.
3045 * Makefile.in (all-gcc): Depend on all-ld (for libgcc1-test).
3049 * test-build.mk: Enable building of shared libraries on IRIX 5 and
3050 OSF/1. Fix compiler flags.
3051 * build-all.mk: Support Linux and OSF/1 3.0. Fix compiler flags.
3055 * configure.in: Recognize --with-newlib.
3056 (sparc-*-sunos4*): Build sim, dejagnu, expect, tcl if cross target.
3058 start-sanitize-gdbtk
3061 * Makefile.in: move {all,check,install}-gdb from *_MODULES
3062 to *_X11_MODULES due to gdbtk needing X include files et al.
3067 Merge in support for Mac MPW as a host.
3068 (Old change descriptions retained for informational value.)
3070 * mpw-config.in: Add generic include forwards for cpu-specific
3071 include files in aout and elf directories.
3073 * mpw-configure: Added copyright.
3074 * mpw-config.in: Check for presence of required build tools.
3075 (target_libs): Add newlib.
3076 (target_tools): Add examples.
3077 (Read Me): Generate as "Read Me for MPW" instead.
3078 * mpw-build.in: Base sub-builds on all-foo instead of do-foo.
3079 (all-byacc, do-byacc, all-flex, do-flex, do-newlib): New actions.
3080 (do-gas, do-gcc, do-gdb, do-ld): Build Version.r first.
3082 * mpw-configure: Remove subdir-specific makefile hackery,
3083 delete mk.tmp after using it.
3085 * mpw-build.in (all): Display start and end times.
3087 * mpw-configure (host_canonical): Set.
3088 (target_cpu): Always add to makefiles.
3089 (ARCHDEFS, EMUL): Add to makefile only if nonempty.
3090 (TM_FILE, XM_FILE, NM_FILE): No longer add to makefile.
3091 (mpw-mh-mpw): Look for in srcdir and srcroot.
3092 Use sed instead of mpw-edit-prefix to edit prefix definitions.
3094 * mpw-build.in: (install-only): New target.
3096 * mpw-configure (host_alias, target_alias): Rename from hostalias
3097 and targetalias, add into generated Makefile.
3098 (mk.tmp): If present, add into generated Makefile.
3099 * mpw-build.in (all-gas): Build config.h first before gas proper.
3101 * mpw-configure (config.status): Write only if changed.
3102 * mpw-config.in (readline): Configure it (not built, just used for
3105 * mpw-config.in (elf/mips.h): Add a forward include.
3107 * mpw-config.in: Forward-include most .h files in include into
3109 (readline): Don't build.
3110 mpw-build.in (install): Install GDB.
3112 * mpw-configure (prefix, mpw_prefix): Handle it.
3113 * mpw-config.in (mmalloc, readline): Don't configure.
3114 * mpw-build.in (thisscript): Rename to ThisScript.
3115 Use mpw-build instead of BuildProgram everywhere.
3116 (mmalloc, readline): Don't build.
3117 * mpw-README: New file, basic documentation about the MPW port.
3119 * mpw-config.in: Use forward-include to create include files.
3121 * mpw-configure: Add more things to the top of each configured
3122 Makefile, including contents of config/mpw-mh-mpw.
3123 * mpw-config.in (extra-include): Create this directory and fill it
3124 with Posix-like include files when configuring.
3126 * config.sub (apple, mac, mpw): Add various aliases.
3128 * mpw-build.in: New file, top-level build script fragment for MPW.
3129 * mpw-configure: New file, configure script for MPW.
3130 * mpw-config.in: New file, config fragment for MPW.
3134 * configure.in (host_libs): Remove glob, since it is gone from the
3139 * Makefile.in: define empty GDB_NLM_DEPS var.
3141 * configure.in(target_makefile_frag): use config/mt-netware
3142 for netware targets.
3146 * config.sub: Merge in recent FSF changes. Remove linux special
3151 build-all.mk,config/mh-solaris: revert these two changes:
3155 * build-all.mk: Use CC=cc -Xs on Solaris.
3157 Mon Mar 29 19:59:26 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3159 * config/mh-solaris: SunPRO C needs -Xs to be able to get a
3160 working xmakefile for Emacs.
3164 * glob/*: Removed. Schauer's 24 Feb 1994 readline change made us
3166 * Makefile.in: Nuke all references to glob subdirectory.
3170 * configure.in: Fix --enable-shared logic in per-host.
3174 * configure.in (*-hp-hpux[78]*): Use mh-hpux8.
3178 * configure.in (noconfigdirs): Don't build gas on AIX, for
3179 powerpc*-*-aix* as well as for rs6000*-*-aix*.
3183 * configure: Fix --cache-file to work if the file argument is a
3188 * configure: If the --cache-file is used, pass it down to
3189 configure in subdirectories.
3193 * config.sub: add vxworks29k configuration.
3197 * Makefile.in (taz): Do "diststuff" part quietly.
3201 * config.sub: Mini-merge with gcc/config.sub.
3205 * config.guess (IRIX): Sed - to _.
3209 * Makefile.in (source-vault, binary-vault): New targets.
3213 * config.sub: Recognize -eabi as a basic system type.
3217 * configure.in (enable_shared stuff): Fix typo.
3221 * Makefile.in (BASE_FLAGS_TO_PASS): Fix typo in passing LIBCXXFLAGS*.
3225 * Makefile.in (LIBCXXFLAGS_FOR_TARGET): Add -fno-implicit-templates.
3229 * configure.in (rs6000-*-*): Don't build gas.
3233 * Makefile.in: Use /x/x/ instead of /brokensed/brokensed/, to
3234 reduce command line length.
3235 (AS_FOR_TARGET): Check for as.new, not Makefile.
3236 (NM_FOR_TARGET): Check for nm.new, not Makefile.
3240 * config.guess: Merge from FSF.
3244 * configure: Don't use $ when handling program_suffix.
3248 * configure.in: Configure tk for hppa/hpux.
3252 * Makefile.in (LIBGXX_SUPPORT_DIRS): Add libstdc++.
3256 * Makefile.in: Move -fno-implicit-template from CXXFLAGS
3257 to LIBCXXFLAGS. Tests are better run without it.
3261 * Makefile.in (all-ispell): Depend on all-emacs19 instead of all-emacs.
3265 * configure.in (*-*-netware*): Don't configure xiberty.
3269 * configure.in: Remove tk from native_only list.
3273 * build-all.mk: Add mips-ncd-elf target to sun4 targets
3274 for special NCD build.
3278 * Makefile.in (DEVO_SUPPORT): Remove configure.bat and
3279 makeall.bat, they're only useful for binutils snapshots.
3280 (binutils.tar.gz, gas+binutils.tar.gz): Add configure.bat and
3281 makeall.bat to specified SUPPORT_FILES.
3285 * build-all.mk: Add Ericsson targets to sun4 and solaris
3286 hosts. Add BNR's sun4 target to solaris host, so their
3287 build-from-source will be tested in-house first.
3291 * Makefile.in (LIBCFLAGS): New variable.
3292 (CFLAGS_FOR_TARGET): Ditto.
3293 (LIBCFLAGS_FOR_TARGET): Ditto.
3294 (LIBCXXFLAGS): Ditto.
3295 (CXXFLAGS_FOR_TARGET): Ditto.
3296 (LIBCXXFLAGS_FOR_TARGET): Ditto.
3297 (BASE_FLAGS_TO_PASS): Pass them.
3298 (EXTRA_TARGET_FLAGS): Ditto.
3300 * configure.in, config/m[th]-*pic: Support --enable-shared.
3304 * configure.in (target_libs): Include libstdc++ again.
3305 * config.guess: Update from FSF (for FreeBSD).
3309 * Makefile.in (DEVO_SUPPORT): Include configure.bat and
3311 (DISTDOCDIRS): Add `etc'.
3312 (ETC_SUPPORT_PFX): New variable.
3313 (taz): Include anything from etc starting with a word in
3318 * config.sub: Update for recent FSF changes. Remove obsolete
3319 h8300hds entry. Add -windows* and -osx as basic os. Minor
3324 * configure.in (target_libs): Remove libstdc++ for libg++-2.6.1.
3326 * config.guess: Merge with FSF.
3327 * configure.in: Match on i?86-ncr-sysv4.3, not i?86-ncr-sysv43.
3331 * configure: Since the "trap 0" handler will override the exit
3332 status on many systems, only use it for "exit 1", and make it set
3333 a non-zero exit status; reset it before "exit 0". Also, check
3334 exit status of config.sub, and error out if it failed.
3338 * Makefile.in: (ALL_TARGET_MODULES,INSTALL_TARGET_MODULES) Build
3339 and install libgloss.
3343 * Makefile.in (all-binutils): Depend upon all-byacc.
3345 * configure.in: Don't build emacs on Irix 5.
3349 * configure.in (*-*-netware*): Add libio.
3353 * Makefile.in (ALL_TARGET_MODULES): Add libstdc++.
3354 (CHECK_TARGET_MODULES): Ditto.
3355 (INSTALL_TARGET_MODULES): Ditto.
3356 (TARGET_LIBS): Ditto.
3357 (all-libstdc++): Note dependencies.
3361 * Makefile.in (BINUTILS_SUPPORT_DIRS): Add gas.
3365 * Makefile.in (CXXFLAGS): Use -fno-implicit-templates instead of
3366 -fexternal-templates.
3368 * configure.in (target_libs): Add libstdc++.
3369 (noconfigdirs): Add libstdc++ as appropriate.
3373 * config.guess: Update from FSF.
3377 * configure: Use ${config_shell} when running ${configsub}.
3381 * config.sub: No longer recognize h8300h.
3385 * config.sub: Remove extraneous differences between config.sub and
3390 * Makefile.in (DISTSTUFFDIRS): Add gas.
3394 * COPYING.NEWLIB: New file.
3398 * config.guess (HP-UX): Patch from Harlan Stenn
3403 * config.guess (sun4*:SunOS:*:*): Change '-JL' to '_JL'.
3407 * config.sub: Merge nextstep cleanup from FSF.
3411 * configure.in (arm-*-*): Don't configure ld for this target.
3415 * configure.in (*-*-netware): don't configure libg++, libio,
3420 * configure.in (alpha-dec-osf*): Use osf*, not osf1*. Don't
3421 configure ld--it works, but it doesn't support shared libraries.
3425 * config.guess (*-unknown-freebsd*): Get rid of possible
3426 trailing "(Release)" in version string.
3431 * config.guess: Fix i486-ncr-sysv43 -> i486-ncr-sysv4.3.
3432 Fix type: *-next-neststep -> *-next-nextstep.
3434 * config.guess: Merge from FSF:
3438 * config.guess: Recognize powerpc-ibm-aix3.2.5.
3442 * config.guess: Recognize UnixWare 1.1 (UNAME_SYSTEM is SYSTEM_V
3443 instead of UNIX_SV for UnixWare 1.0).
3447 * Makefile.in (all-gdb): Add dependencies on all-gcc and all-ld
3448 to make gdb/nlm/* build after the compiler and linker.
3452 * config.guess (netbsd, freebsd, linux): Accept any machine,
3454 (m68k-atari-sysv4): Relocate to match FSF version.
3456 * config.guess: More merges from the FSF:
3458 Add a space before function call or macro invocation.
3462 * config.guess: Add trap cmd to remove dummy.c and dummy when
3467 * config.guess (dummy.c): Redirect stderr for `hostinfo' command.
3468 (dummy): Redirect stderr from compilation of dummy.c.
3472 * config.guess: Distinguish between NeXTStep 2.1 and 3.x.
3476 * configure: Accept and ignore --cache*, for compatibility with
3481 * config.guess: Merge from FSF:
3485 * config.guess (Pyramid*:OSx*:*:*): New case.
3486 (PATH): Add /.attbin at end for finding uname.
3487 (dummy.c): Handle i860-alliant-bsd. Follow whitespace conventions.
3491 * config.guess (M88*:DolphinOS:*:*): New case.
3495 * config.guess (AViiON:dgux:*:*): Use TARGET_BINARY_INTERFACE
3496 to select whether to use ELF or COFF.
3500 * config.guess: Recognize i860-stardent-sysv and i860-unknown-sysv.
3504 * config.guess: Guess the OS version for HPUX.
3508 * config.guess (UNAME_VERSION): Recognize aix3.2.4 and aix3.2.5.
3512 * configure.in: Recognize --with-headers, --with-libs, and
3514 * Makefile.in (all-xiberty): Depend upon all-ld.
3518 * configure.in: Change i[34]86 to i[345]86.
3522 * configure (version): A few more tweaks to help message.
3526 * Makefile.in: Remove (for now) librx as a host library,
3527 now that we're building it for target.
3536 * configure.in: Also configure librx.
3540 * Makefile.in: Update various rules to reflect that librx
3541 is now needed for libg++.
3545 * config.sub: Accept mips64orion and mips64orionel as a CPU name.
3549 * configure.in: Configure the examples directory.
3553 * configure: Simplify Jun 2 1994 change.
3557 * change CC to /usr/latest/bin/gcc for lynx host builds, since
3558 /bin/gcc isn't good enough to build gcc.
3562 * Makefile.in (GDB_SUPPORT_FILES): Remove
3563 (setup-dirs-gdb, gdb.tar.gz, make-gdb.tar.gz): Remove old rules.
3564 (gdb.tar.gz): Add new rule to use standard distribution building
3569 * configure.in: Warn about use of /usr/ucb/cc on Solaris. From
3578 * configure: Search current dir first in .gdbinit.
3582 * config.sub: Recognize freebsd (merged from gcc config.sub).
3586 * config.sub: Refer to NeXT's operating system as nextstep.
3588 * config.sub (case $basic_machine): Re-order the cases, to match
3589 the order in the FSF version (which is mostly alphabethical).
3590 Merge in some additions and changes from the FSF.
3594 * config.guess: Recognize m68k-atari-sysv4 and m88k-harris-csux7.
3595 * config.sub: Recognize cxux7.
3596 * configure.in: Use mh-cxux for m88k-harris-cxux*.
3600 * config.sub: Fix typo powerpc -> powerpc-*.
3604 * Makefile.in: `all-emacs19' depends on `all-byacc'.
3606 * Makefile.in: Add all-emacs19 and install-emacs19 rules (in
3607 parallel with all-emacs and install-emacs). Top-level command
3608 `make all-emacs19 CC=gcc' now behaves as `make all-emacs CC=gcc'.
3612 * test-build.mk ($(host)-stamp-stage2-installed): Remove
3613 $(relbindir)/make before doing ``make install'', and use
3614 $(GNU_MAKE) while doing it. Avoids problem on SunOS with
3615 installing over running make binary.
3616 ($(host)-stamp-stage3-installed): Likewise.
3620 * config.guess: Recognize Mach.
3624 * configure: Check ${exec_prefixoption}, not ${exec_prefix}, to
3625 see whether --exec-prefix was used.
3629 * README: Explicitly mention libg++/README. (Zoo's idea.)
3633 * Makefile.in: Add all-librx target similar to all-libproc.
3637 * config.guess: Rearrange tests for Alpha-OSF1 to properly deal
3638 with post 1.2 uname bogosity.
3642 * configure: Remove temporary files on receipt of a signal.
3646 * configure: If there is a package_makefile_frag, remove
3647 ${subdir}/Makefile.tem after copying it in.
3651 * build_all.mk: support rs6000 lynx identifies itself as
3652 rs6000-lynx-lynxos2.2.2. Also, use /usr/cygnus/progressive/bin/gcc
3653 since /bin/gcc is too feeble to compile a modern gcc.
3657 * brought devo/test-build.mk update-to-date with progressive/
3658 test-build.mk. Add lynx targets and hppa flag info.
3662 * configure.in: Use mh-ncrsvr43. Patch from
3667 * config.guess (i386-unknown-bsdi): No longer need to
3668 check #if defined(__bsdi__) && defined(__i386__).
3672 * configure: Set program_transform_nameoption correctly.
3676 * brought build-all.mk update-to-date with progressive build-all.mk,
3677 added new targets and hppa info.
3681 * configure: If config.guess result is a prefix of the user
3682 specified target, assume a native build and use the user specified
3683 target as the host alias. Remove SunOS patch suffix removal hack.
3684 * configure.in: Remove SunOS patch suffix removal hack.
3686 * Makefile.in (CROSS_CHECK_MODULES): Remove check-flex, since it's
3687 in NATIVE_CHECK_MODULES.
3691 * Makefile.in: Rename HOST_ONLY to NATIVE.
3692 * configure: Delete SunOs patch suffix from host_canonical
3693 and build_canonical variables that are prepended to Makefiles.
3694 * configure.in: Add comments for easier maintenance.
3698 * Makefile.in: Add all-libproc target similar to all-gui.
3702 * Makefile.in (CHECK_MODULES): split into
3703 HOST_ONLY_CHECK_MODULES and CROSS_CHECK_MODULES.
3707 * config.guess (i386-unknown-bsdi): New system to guess.
3711 * Makefile.in: Add all-gui target (but not yet build by "all").
3715 * config.sub: Move deletion of patch suffix from here...
3716 * configure.in: To here, at Ian's suggestion. The top-
3717 level scripts might need to know of a patch level.
3721 * config.sub: Strip off patch suffix so rtl is recognized
3722 as a sunos4.1.3 machine, even though it's been patched.
3726 * Makefile.in (INSTALL_LAST): Delete.
3727 (INSTALL_DOSREL): New.
3731 * configure.in: Use ld for i[34]86-*-sysv4* and sparc-*-solaris2*.
3732 Don't set use_gnu_ld to no for *-*-sysv4; that only controls
3733 whether we pass down --with-gnu-ld anyhow.
3737 * Makefile.in (INSTALL_LAST): Change operation so it works
3738 on more flavors of make.
3739 * configure.in (go32): Don't build libg++ or libio.
3743 * Makefile.in (Move HOST_PREFIX_1 and friends up so
3744 they can be overriden by templates.
3748 * configure.in (target==go32): Don't build gdb.
3749 * dosrel: New directory.
3753 * configure.in (host==go32): Configure dosrel too.
3754 * Makefile.in (INTALL_TARGET): Call INSTALL_LAST last.
3755 (HOST_CC, HOST_PREFIX, HOST_PREFIX_1): Undefine, they should
3756 be set by incoming names or templates.
3757 (INSTALL_LAST): New rule.
3758 * config/mh-go32: New fragment.
3762 * config.sub (sparclitefrw, sparclitefrwcompat): Don't set the os.
3766 * config/mh-lynxrs6k: Renamed from mh-lynxosrs6k, to make it
3767 unique in 8.3 naming schemes.
3768 * configure.in (appdirs): New variable. Currently empty, but will
3769 be used in gas distribution. If nonempty, lists a set of
3770 directories at least one of which must get configured, or top
3771 level configuration is considered to have failed.
3772 (rs6000-*-lynxos*): Use new file name.
3776 Eliminate XTRAFLAGS.
3777 * Makefile.in (CC_FOR_TARGET): If newlib exists, refer to the
3778 newlib include files using -idirafter, and also use -nostdinc.
3779 (CXX_FOR_TARGET): Likewise.
3780 (XTRAFLAGS): Removed.
3781 (BASE_FLAGS_TO_PASS): Remove XTRAFLAGS_FOR_TARGET.
3782 (EXTRA_HOST_FLAGS): Remove XTRAFLAGS.
3783 (EXTRA_TARGET_FLAGS, EXTRA_GCC_FLAGS): Likewise.
3784 ($(DO_X)): Don't pass down XTRAFLAGS.
3788 * configure.in (mips*-dec-bsd*): New target; do build linker.
3789 (mips*-*-bsd*): New target; don't build linker.
3793 * configure.in: support rs6000-*-lynxos* configuration.
3794 support sunos4 as a cross target.
3796 * config.sub: look for lynx*, not lynx since the OS version may
3797 legitimately be part of the name.
3801 * configure.in (i[34]86-*-sco*): Move to be with other i386
3803 (romp-*-*): New target. Skip various binary utilities.
3804 (vax-*-*): New target. Don't build newlib.
3805 (vax-*-vms): Renamed from *-*-vms. Don't build opcodes or newlib.
3809 * configure.in: Only set host_makefile_frag if config
3814 * install.sh: If $dstdir exists, don't check whether each
3819 * test-build.mk (HOLES): Add sleep; used by rcs/src/conf.sh.
3823 * configure.in (*-*-lynxos*): Don't configure newlib for either
3824 native or cross Lynx.
3828 * config.sub (sparc64-elf): Fix os.
3829 (z8k): Remove duplicate.
3833 * Makefile.in (gcc-no-fixedincludes): Touch gcc/include/fixed, not
3834 gcc/stmp-fixproto, to try to prevent fixproto from being run.
3838 * configure: Make file links cleanly even if Lynx fails on
3839 an NFS symlink (at least fail cleanly).
3843 * test-build.mk (CC): For mips-sgi-irix4, change -XNh1500 to
3848 * configure: Unknown options are fatal again.
3852 * configure: Ignore --x-includes and --x-libraries, for Autoconf
3857 * build-all.mk: Add `clean' target.
3861 * config.guess: Add SINIX support.
3862 * configure.in: Add mips-*-sysv4* support.
3866 * build-all.mk: Document all useful targets.
3867 If canonhost is sparc-sun-solaris2.3, change it to sparc-sun-solaris2.
3868 If canonhost is mips-sgi-irix4.0.5H, change it to mips-sgi-irix4.
3872 * configure: Support --silent, --quiet.
3876 * configure: Support --disable-FEATURE.
3880 * config.guess: Recognize NCR running SVR4.3.
3884 * config.guess: Make BSDI generate i386-unknown-bsd386.
3889 * configure.in (powerpc-*-aix*): Treat like rs6000-*-*.
3893 * configure: Make unrecognized options give nonfatal warnings
3894 instead of fatal errors, and pass them to any subdirectory
3895 configures in case they recognize them.
3896 Make --x equivalent to --with-x.
3900 * configure: Add --enable-* options. Clean up usage message and
3905 * Makefile.in (NM_FOR_TARGET): Build tree version is now nm.new.
3909 * configure.in (hppa*-*-*): Enable binutils.
3913 * config.sub: Recognize cisco.
3917 * Makefile.in (CXXFLAGS): Add -fexternal-templates.
3921 * config.guess: about target *-hitachi-hiuxwe2, don't print more
3922 than one configuration name. Add comment.
3926 * config.guess: about target *-hitachi-hiuxwe2, fixed
3927 machine guessing order. [Hitachi's CPU_IS_HP_MC68K
3928 macro is incorrect.]
3932 * Makefile.in (TAGS): Just build TAGS in each subdirectory, rather
3933 than the "make ls" stuff which used to be here.
3937 * config.guess: Recognize i[34]86-unknown-freebsd.
3942 * configure.in (noconfigdirs for alpha): Remove libg++ and libio.
3946 * config.guess: Check for ptx.
3950 * config.sub: Add os9k checking.
3954 * config.guess: Handle OSF1 running on HPPA processors
3958 * configure: If subdir configure fails, print out a message with
3959 subdirectory name, in case subdir's configure code didn't identify
3964 * configure.in: Remove embedded newlines from configdirs.
3965 Avoid mismatches of substrings. Fix matching strings at end
3968 Fri Feb 11 15:33:33 1994 Stu Grossman (grossman at cygnus.com)
3970 * config.guess: Add Lynx/rs6000 config support.
3974 * configure.in (alpha-dec-osf1*, alpha*-*-*): Build gas.
3978 * configure.in (hppa*-*-osf*): Treat this just like most other
3979 PA configurations (eg no binutils or ld).
3980 (hppa*-*-*elf*): These configurations have binutils and ld.
3988 * configure.in (rs6000-*-*): Build gas.
3992 * Makefile.in: Avoid bug in losing hpux sed.
3996 * Makefile.in, test-build.mk: Remove MUNCH_NM; it was only needed
3997 for GDB and GDB has been fixed to not need it.
3999 Mon Jan 31 18:40:55 1994 Stu Grossman (grossman at cygnus.com)
4001 * config/mh-lynxosrs6k: Account for lack of ranlib!
4005 * config.guess: Recognize vax hosts.
4009 * configure (while loop): Don't use "break 2" inside case
4010 statement -- the case statement isn't an enclosing loop.
4014 * config.guess: Clean up NeXT support, to allow nextstep
4015 on Intel machines. Make OS be nextstep.
4019 * config.guess: Add alternate forms for Convex.
4021 Thu Jan 20 16:13:41 1994 Stu Grossman (grossman at cygnus.com)
4023 * configure: Completely rewrite option processing. Take
4024 advantage of pattern-matching to avoid invoking test frequently.
4025 Also clean up host and target defaulting logic.
4029 * Makefile.in: Replace all occurrances of "rootme" with "r" and
4030 "$${rootme}" with "$$r", to increase the likelihood that the do-*
4031 commands (plus user environment) will fit SCO limits.
4035 * configure.in: Don't issue warnings about directories which are
4036 not being configured if -norecursion is set. Correct test for
4037 --with-gnu-as and --with-gnu-ld to not get confused by substring
4040 * configure.in: Don't build gas for alpha-dec-osf1*.
4042 Tue Jan 4 17:10:19 1994 Stu Grossman (grossman at cygnus.com)
4044 * configure: Back out Per's change of 12/19/1993. It changes the
4045 behavior of configure in unexpected and confusing ways.
4047 Also, use different delim char when calculating
4048 program_transform_name so that the name can contain slashes.
4052 * configure.in, config.sub: Add support for VSTa micro-kernel.
4056 * configure.in: Nuke hacks which were used to get a special
4057 version of GAS for HPPA configurations.
4061 * configure: If only ${target_alias} is given, use that
4062 as the default for ${host_alias}.
4063 * configure: Add missing back-slashes before nested quotes.
4067 * Makefile.in (BASE_FLAGS_TO_PASS): add YACC=$(BISON)
4071 * config.guess: Recognize some Tektronix configurations.
4076 * config.sub: Match any flavor of SH.
4080 * configure.in: Don't try to configure newlib for Alpha.
4084 * configure.in: Don't build ld for Irix 5. Don't build gas,
4085 libg++ or libio for any Alpha target.
4087 * configure.in (mips*-sgi-irix5*): New target; use mh-irix5.
4088 * config/mh-irix5. New file for Irix 5.
4092 * Makefile.in (GZIPPROG): Renamed from GZIP, which gzip uses for
4093 default arguments -- so it tried to compress itself.
4097 * configure.in (notsupp): ensure that a space is always at the end
4098 of the configdirs list, since the grep checks for an explicit space
4102 * configure.in (target i386-sysv4.2): don't build ld, since static
4103 versions of many libraries are not available.
4107 * config.guess: Recognize Apollos (using environment variables).
4108 * configure.in: Don't configure ld, binutils, or gprof for Apollo.
4112 * config.guess: Recognize Sony news mips running newsos.
4116 * Makefile.in (all-cygnus, build-cygnus): "fi else" needs to be
4117 "fi ; else" for bash.
4121 * Makefile.in (BASE_FLAGS_TO_PASS): pass SHELL.
4125 * config.sub: accept unixware as an alias for svr4.2.
4126 Fix some inconsistancies with the gcc version.
4130 * Makefile.in (DISTDOCDIRS): Add gdb.
4134 * Makefile.in (DISTDOCDIRS): Add libg++ and libio.
4138 * Makefile.in (taz): Only build "info" in DISTDOCDIRS.
4139 (DISTDOCDIRS): Don't assume libg++ and gdb folks necessarily want
4144 * config.sub: Accept hiux* as an OS name.
4146 * Makefile.in: Change RUNTEST_FLAGS back to RUNTESTFLAGS per
4147 etc/make-stds.texi. The underscore came from gcc, and dje now
4148 agrees that RUNTESTFLAGS is the correct name.
4152 * install.sh: Remove 'set -e'. It makes any conditionals
4153 in the script useless.
4155 * config.guess: Automatically recognize arm-acorn-riscix
4160 * Makefile.in: Change RUNTESTFLAGS to RUNTEST_FLAGS
4164 * Makefile.in (DISTDOCDIRS): New variable.
4165 (taz): Edit local Makefile.in sooner, instead of proto-toplev
4166 Makefile.in later. Build "info" and "dvi" in DISTDOCDIRS.
4170 * configure.in (hppa target): check the source directory for the
4175 * config.sub: Allow -aout* and -elf*.
4179 * configure.in: Don't build ld on i386-solaris2, same as for
4184 * Makefile.in (taz): Add texinfo/lgpl.texinfo (for libg++).
4188 * configure.in: Configure gdb for alpha.
4192 * Makefile.in (CXXFLAGS): Add -O.
4196 * config.guess: added support for DG Aviion
4200 * configure.in: Produce warning message for subdirectories not
4201 configurable for this host/target combination. Don't try to
4202 configure gdb for vms.
4206 * Makefile.in (taz): Replace "byacc" with "bison -y" in the
4207 appropriate files before making "diststuff".
4208 (DISTBISONFILES): New var: list of files to be edited.
4209 (DISTSTUFFDIRS): Add binutils.
4213 * config.sub: also handle mipsel and mips64el (for little endian mips)
4217 * configure.in: Add * to end of all OS names.
4221 * configure.in: Build newlib for LynxOS native.
4225 * config.guess: Add support for delta 88k running SVR3.
4227 * configure.in: Add comment about HP compiler vs. emacs.
4231 * configure.in: don't build ld on solaris2 (not a viable option
4232 due to bugs in getpwnam & getpwuid)
4236 * configure.in: Accept alpha-dec-osf1*, not just -osf1, since
4237 config.guess will produce a full version number.
4241 * configure.in: Build linker and binutils for alpha-dec-osf1.
4245 * Makefile.in: Remove -O from CXXFLAGS for consistency with CFLAGS,
4246 and gdb/testsuite/Makefile.in.
4250 * configure.in: recognize mips*- instead of mips-
4254 * config.sub: Accept linux*coff and linux*elf as operating
4259 * config.sub: Recognize mips64, and mips3 as an alias for it.
4263 * configure.in: Remove alpha-dec-osf*, no longer necessary now that
4264 gdb knows how to handle OSF/1 shared libraries.
4268 * configure.in: Recognize hppa*-*-hiux* (currently synonym for hpux).
4269 * config.guess: Recognize Hitachi's HIUX.
4270 * config.sub: Recognize h3050r* and hppahitachi.
4271 Remove redundant cases for hp9k[23]*.
4275 * configure.in: default to '--with-gnu-as' and '--with-gnu-ld'
4276 if gas and ld are in the source tree and are in ${configdirs}.
4277 If ${use_gnu_as} or ${use_gnu_ld} are 'no', then don't set the
4278 the --with options (but still pass them down on the command line,
4279 if they were explicitly specified).
4283 * configure: substitute SHELL value in Makefile.in with
4288 * configure.in: Build gas, ld, and binutils for *-*-sysv4* and
4289 *-*-solaris2* targets.
4293 * Makefile.in: define M4, and pass it down to sub-makes;
4294 all-autoconf now depends on all-m4
4298 * Makefile.in ({AR,RANLIB}_FOR_TARGET): make contingent on
4299 presence of {ar,ranlib} instead of a configured directory
4303 * config.guess: Accept 34?? as well as 33?? for NCR.
4307 * configure.in: grab mt-hppa for HPPA targets; use 'gas ' instead
4308 of 'gas' in sed commands, since 'gash' is now in the tree as well.
4312 * configure: grab values for $(CC) and $(CXX) from the
4313 environment, so that someone can do "CC=gcc configure; make" and
4314 have it work right (matching the way that autoconf works now)
4316 * configure.in, Makefile.in: add support for gash, the tcl
4319 * config.guess: add NetBSD variants (hp300, x86)
4323 * install.sh: Support -d option (in the manner of SunOS 4 install,
4324 as it is more deterministic than that of GNU install)
4325 (chmodcmd): Set file to mode 755 by default (should also do default
4326 chgrp and chown, but I don't feel like dealing with that now)
4330 * config.sub: Remove h8300hhms alias.
4334 * configure.in: Match *-*-solaris2* not *-sun-solaris2*.
4338 * Makefile.in (gcc-no-fixedincludes): touch stmp-fixproto as well
4343 * config.sub: recognize m88110-bug-coff.
4347 * Makefile.in (all-libio): all dependencies on the toolchain used
4348 to build this (gcc, gas, ld, etc)
4352 * config.guess: Deal with OSF/1 1.3 on alpha.
4356 * install.sh: add some 'else true' clauses for portability
4358 * configure.in: don't build libio for h8[35]00-*-* targets
4362 * Makefile.in: Add support for new libio.
4366 * install.sh: If one command fails, don't try the rest. Don't try
4367 to remove $dsttmp (via trap) unless we have already created it.
4368 If $src doesn't exist, detect it and exit with an error.
4370 * config.guess: Recognize BSD on hp300.
4374 * config.guess: Map (9000/[34]??:HP-UX:*:*) to m68k-hp-hpux.
4379 * Makefile.in (all-send-pr): depends on all-prms
4383 * config.guess: Fix typo (9000/8??:4.3bsd -> 9000/7??:4.3bsd).
4388 Added test for mips-mips-riscos5.
4392 * configure.in: use mh-hp300 for 68k HP hosts
4396 * configure: add support for CONFIG_SHELL, so that you can use
4397 some alternate shell for evaluating configure scripts
4401 * Makefile.in (make-gdb.tar.gz): Sed bug reporting address
4403 distribution archive.
4404 * Makefile.in (COMPRESS): Remove def.
4405 * Makefile.in (gdb.tar.gz, make-gdb.tar.gz): Renamed from
4406 gdb.tar.Z and make-gdb.tar.Z respectively.
4407 * Makefile.in (make-gdb.tar.gz): Now only build gzip'd archive.
4408 * Makefile.in (make-gdb.tar.gz): Minor changes to move closer
4409 to convergence with 'taz' target in Makefile.in.
4413 * install.sh (dsttmp): use trap to ensure that tmp files go
4414 away on error conditions
4418 * Makefile.in (BASE_FLAGS_TO_PASS): remove LOADLIBES
4422 * Makefile.in (install-dirs): Deal with a prefix like /gnu;
4423 its parent is '/' not ''.
4425 * Makefile.in (DEVO_SUPPORT): Add comments about ChangeLog.
4429 * configure: if ${newsrcdir}/configure doesn't exist, don't assume
4430 that ${newsrcdir}/configure.in does.
4434 * test-build.mk: support for CONFIG_SHELL
4438 * config.sub (netware): Add as a basic system type.
4442 * Makefile.in (Makefile): depend on configure.in. Also drop the
4443 $(srcdir)/ from the dependency on Makefile.in.
4447 * config.sub: Recognize h8300hhms as h8300h-hitachi-hms.
4448 (h8300hhms is temporary until multi-libraries are implemented).
4449 * configure.in: Handle h8300h too.
4453 * config.guess: Recognize dpx/2 as m68k-bull-sysv3.
4457 * configure: Remove extraneous output when guessing host type.
4458 * config.guess: Remove extraneous output when guessing using C
4459 compiler rather than uname, or when guessing fails.
4461 Wed Jul 7 17:58:14 1993 david d `zoo' zuhn (zoo at rtl.cygnus.com)
4463 * Makefile.in: remove all.cross and install.cross targets
4465 * configure: remove CROSS=-DCROSS_COMPILE and ALL=all.cross
4470 * configure.in (target sh): Build gprof.
4472 Thu Jul 1 16:52:56 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4474 * config.sub: change -solaris to -solaris2
4478 * configure.in: Use config/mh-riscos for mips-*-sysv*.
4482 * configure: Correct error message for missing Makefile.in to
4483 print correct directory.
4485 Tue Jun 29 13:52:16 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4487 * install.sh: kludge around 386BSD shell bug
4491 * config.guess: Recognize NeXT.
4492 * config.guess: Recognize i486-ncr-sysv4.
4493 * Makefile.in (taz): rm $(TOOL)-$$VER before linking.
4497 * Makefile.in (MAKEINFOFLAGS): New variable.
4498 (FLAGS_TO_PASS): Pass MAKEINFO as MAKEINFO MAKEINFOFLAGS.
4499 * build-all.mk, test-build.mk: Pass down --no-split as
4500 MAKEINFOFLAGS when hosted on DOS. Compile DOS hosted without -g.
4504 * Makefile.in (DEVO_SUPPORT): Add COPYING COPYING.LIB install.sh.
4508 * Makefile.in (libg++.tar.z): New rule.
4509 * Makefile.in (taz): Replace 'configure -rm' by 'make distclean'.
4510 * Makefile.in (taz): Only do a single chmod.
4512 Fri Jun 18 12:03:10 1993 david d `zoo' zuhn (zoo at majipoor.cygnus.com)
4514 * install.sh: don't use dirname anymore (replaced with sed usage)
4518 * Makefile.in: Change extension for gzip'd files from '.z' to
4519 '.gz' per new FSF standard usage.
4521 Thu Jun 17 16:58:50 1993 david d `zoo' zuhn (zoo at majipoor.cygnus.com)
4523 * configure: put quotes around the final value of program_transform_name
4525 Tue Jun 15 16:48:51 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4527 * Makefile.in: new install.sh support; update install-info rules
4531 * configure.in: Build diff for crosses, but not for go32 host.
4533 * configure.in: Build gprof only for native, and don't build it
4534 for mips-*-*, rs6000-*-*, or i[34]86-*-sco*.
4536 Mon Jun 7 13:12:11 1993 david d `zoo' zuhn (zoo at deneb.cygnus.com)
4538 * configure.in: don't build gas,ld,binutils on for *-*-sysv4
4542 * configure.in (host_tools): Add prms.
4544 Fri Jun 4 13:30:42 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4546 * Makefile.in: install gcc, do installation of $(INSTALL_MODULES)
4547 with $(FLAGS_TO_PASS) on the command line
4549 * config.sub: Recognize lynx and lynxos
4553 * config.sub: Accept -ecoff*, not just -ecoff.
4557 * Makefile.in (taz): Use .gz suffix instead of .z.
4558 (binutils.tar.gz, gas+binutils.tar.gz, gas.tar.gz): Fixed target
4561 Thu Jun 3 00:27:06 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4563 * Makefile.in (vault-install): add an 'else true' (for Ultrix)
4565 Wed Jun 2 18:19:16 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4567 * Makefile.in (install-no-fixedincludes): install gcc last, so
4568 that rebuilds that might happen during 'make install' don't get
4569 bogus gcc include files
4573 Change from Utah for HPPA support:
4574 * config.guess: Recognize hppa1.x-hp-bsd.
4578 * config.guess: Add support for Motorola Delta 68k, up to r3v7.
4581 Tue Jun 1 17:48:42 1993 Rob Savoye (rob at darkstar.cygnus.com)
4583 * config.sub: Add support for rom68k and bug boot monitors.
4587 * Makefile.in: Make all-opcodes depend on all-bfd.
4591 * config.guess: Added special check for i[34]86-univel-sysv4*.
4595 * config.guess: For i[34]86-unknown-sysv4 use UNAME_MACHINE for
4596 the processor rather than assuming i486.
4600 * config.guess: Recognize SunOS6 as Solaris3.
4604 * config.guess: Fix typo. Avoid #elif (not in K&R 1).
4605 Recognize SunOS 5.* only (and not [6-9].*) as being Solaris2.
4609 * build-all.mk (all-cross): New target for Canadian Cross.
4610 Added Q2 go32 targets.
4611 * test-build.mk: Configure go32 cross sparclite-aout and
4612 mips-idt-ecoff -with-gnu-ld. Moved build binary directory from
4613 PARTIAL_HOLE_DIRS to BUILD_HOLES_DIRS.
4615 Mon May 24 15:30:06 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4617 * configure.in: fix Alpha GDB typo; also, don't build DejaGnu for
4618 GO32 hosted toolchains
4620 Mon May 24 14:18:41 1993 Rob Savoye (rob at darkstar.cygnus.com)
4622 * configure: change so "-exec-prefix" gets passed down rather
4623 than "-exec_prefix" so autoconf generated Makefiles get the
4624 exec_prefix set right.
4626 Fri May 21 10:42:25 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4628 * config.guess: get the Solaris2 minor version number
4630 * Makefile.in: add standards.texi and make-stds.texi to ETC_SUPPORT
4634 * config.guess: Recognize some Sequent platforms.
4636 Thu May 20 14:33:48 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4638 * Makefile.in: added the vault-install target
4640 * configure.in: actually use the Sun3 makefile fragment that's in
4641 config, also added the release dir to configdirs
4645 * Makefile.in (taz): Fix modes on stuff in $(TOOL) dir also.
4647 Tue May 18 20:26:41 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4649 * configure.in: remove some program from Alpha targetted toolchains
4653 * Makefile.in (DISTSTUFFDIRS): Renamed from PROTODIRS. Add ld and
4655 (taz): Run "make diststuff" in those directories instead of "make
4656 proto-dir". Look for "VERSION=" only at start of line in subdir
4657 Makefile. Use "gzip -9" for compression.
4658 (TEXINFO_SUPPORT, DIST_SUPPORT, BINUTILS_SUPPORT_DIRS): New vars.
4659 (binutils.tar.z): New target.
4663 * Makefile.in (taz): Include gpl.texinfo.
4667 * Makefile.in (setup-dirs): Merged into "taz" target.
4668 (taz): Only do `proto-dir' stuff if a directory is actually needed
4673 * Makefile.in (MUNCH_NM): New variable, defined to be $(NM).
4674 (FLAGS_TO_PASS): Pass down MUNCH_NM.
4675 (HOST_CC, HOST_PREFIX, HOST_PREFIX_1): New variables.
4676 (EXTRA_GCC_FLAGS): Pass down HOST_* variables.
4677 (gcc-no-fixedincludes): Correct for current gcc Makefile.
4681 * Makefile.in (make-gdb.tar.Z): Add configure, config.guess,
4682 config.sub, and move-if-change to gdb testsuite distribution
4683 archive, so the testsuite can be extracted, configured, and
4684 run separately from the gdb distribution. Blow away the Chill
4685 tests that require a Chill compiled executable, since GNU Chill
4686 is not yet publically available.
4688 Mon May 10 17:22:26 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4690 * test-build.mk: set environment variables in a single command,
4691 instead of a list of assignments and exports
4693 * config.guess: recognize Alpha/OSF1 systems
4697 * configure: Change help message to prefer --options rather than
4702 * config.sub: Convergent Tech. "miniframe" uses m68010, sez
4704 * config.guess: Recognize miniframe.
4706 Sun May 9 17:47:57 1993 Rob Savoye (rob at darkstar.cygnus.com)
4708 * Makefile.in: Use srcroot to find runtest rather than rootme.
4709 Pass RUNTESTFLAGS and EXPECT down in BASE_FLAGS_TO_PASS.
4713 * test-build.mk: Extensive additions to support building on a
4714 machine other than the host.
4718 * configure (tooldir): Fix for i386-aix again.
4722 * configure, Makefile.in: Change definition of $(tooldir)
4727 * config.guess: Recognize i[34]86/SVR4.
4731 * Makefile.in (all-gdb): gdb depends on sim.
4735 * Makefile.in (gdb.tar.Z): Make prototype gdb testsuite directory
4736 at the same time we make the prototype gdb directory.
4737 * Makefile.in (make-gdb.tar.Z): Make the testsuite distribution
4738 files at the same time as the gdb base release distribution.
4742 * Makefile.in (check): Use individual check targets rather than
4748 * config.sub: Use sysv3.2 not sysv32 for canonical OS
4749 for System V release 3.2.
4753 * config.sub: Recognize hppaosf.
4754 * configure.in: Do configure ld/binutils/gas for it.
4758 * configure (tooldir): Alter syntax used to set this, for systems
4759 where "\$" isn't handled right, like i386-aix.
4763 * configure: Pass program-transform-name, not
4764 program_transform_name, to recursive configures.
4768 * Makefile.in (gas+binutils.tar.z): New rule for building snapshots
4773 * config.guess: Recognize AIX3.2 as distinct from 3.1.
4775 Sat Apr 17 17:19:50 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4777 * configure.in: rename m88k-motorola-m88kbcs to m88k-motorola-sysv
4779 * config/mh-delta88: remove extraneous GCC references
4783 * Makefile.in (PRMS): Set back to all-prms.
4787 * test-build.mk: Pass -with-gnu-as for known MIPS native and MIPS
4788 targets, rather than for MIPS hosts.
4790 Fri Apr 9 13:51:06 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4792 * configure.in: add comment for --with-x default values
4794 * config.guess: handle Motorola Delta88 box for SVR3 and SVR4.
4796 * Makefile.in: add check-* targets for each of the directories in
4797 the tree. Add a definition of RUNTEST that will use the one we
4798 just built, if it exists. Pass this down via FLAGS_TO_PASS.
4802 * configure.in: Removed obsolete references to bfd_target and
4803 target_makefile_frag.
4805 * build-all.mk: Set assorted targets for Q2.
4806 * config.sub: Recognize z8k-sim and h8300-hms.
4807 * test-build.mk: Really don't pass host to configure.
4808 (HOLES): Added uname.
4812 * configure: Handle an empty program-prefix, program-suffix or
4813 program-transform-name correctly.
4817 * build-all.mk: -G 8 no longer required for MIPS targets.
4818 * test-build.mk: Don't pass host argument to configure; make it
4823 * Makefile.in (gdb.tar.Z): Fix for building gzip'd distribution.
4824 * Makefile.in (COMPRESS): New macro, like GZIP.
4828 * test-build.mk: Use -with-gnu-as for mips-sgi-irix4 as well.
4830 * build-all.mk: Set GCC to gcc -O -G 8 for MIPS targets, since gcc
4831 with gas currently defaults to -G 0.
4835 * Makefile.in (all-flex): flex depends on byacc.
4837 * build-all.mk: If host not specified, use config.guess. Pass TAG
4838 to test-build.mk as RELEASE_TAG.
4839 * test-build.mk (configargs): New variable containing arguments to
4840 pass to configure. Set to -with-gnu-as on mips-dec-ultrix.
4841 (FLAGS_TO_PASS): Pass down RELEASE_TAG.
4843 * config.guess: Use /bin/uname when checking -X argument on SCO,
4844 to avoid invoking GNU uname which doesn't understand -X.
4846 * test-build.mk: Don't use /usr/unsupported/bin/as on AIX.
4848 * configure.in: Build gas for mips-*-*.
4852 * Makefile.in (all.normal): insert missing backslash.
4856 * build-all.mk, config/mh-irix4: Bump -XNh value to 1500 to match
4859 * Makefile.in: Complete overhaul to merge many almost identical
4864 * Makefile.in (setup-dirs-gdb): Renamed from setup-dirs.
4865 (gdb.tar.Z): Adjusted.
4867 * Makefile.in (setup-dirs, taz): New targets; should be general
4868 enough to adapt for gdb sometime. Build only .z file.
4869 (gas.tar.z): New target.
4873 * build-all.mk: Use CC=cc -Xs on Solaris.
4875 Mon Mar 29 19:59:26 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4877 * config/mh-sun3: cc needs -J to compile cp-parse.c correctly
4879 * config/mh-solaris: SunPRO C needs -Xs to be able to get a
4880 working xmakefile for Emacs.
4885 for handling BISON for FSF releases.
4889 * configure: Actually implement the change zoo just documented.
4891 Wed Mar 24 13:02:44 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
4893 * configure: when using config.guess, only set target_alias when
4894 it's not already been set (ie, on the command line)
4896 Mon Mar 22 23:07:39 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4898 * Makefile.in: add installcheck target, set PRMS to install-prms
4900 Sun Mar 21 16:46:12 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4902 * configure: add support for package_makefile_fragment, handle the
4903 case where a directory has a configure.in file but no Makefile.in
4904 more gracefully (with an actual understandable error message, even);
4905 add support for --without (and add this to the usage message); also
4906 explicitly add a --host=${host_alias} to the command line when
4907 config.guess is used
4911 * configure: Must use both --host and --target in recursive calls.
4915 * Makefile.in: Change deja-gnu to dejagnu.
4919 * configure.in (h8300-*-*, h8500-*-*): Don't build libg++.
4921 Fri Mar 12 18:30:14 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4923 * configure.in: canonicalize all instances to *-*-solaris2*,
4924 also strip out a number of tools to not build for go32 host
4928 * config.guess: add GPL.
4930 * Makefile.in, config.guess, config.sub, configure: bump
4935 * Makefile.in (do-info): Removed obsolete check for existence of
4938 * Makefile.in (MAKEOVERRIDES): Define to be empty.
4940 Wed Mar 10 03:11:56 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4942 * Makefile.in: a couple of 'else true' for decstation,
4945 * configure.in: configure tclX too; don't remove Tk on RS/6000 anymore
4949 * Makefile.in (setup-dirs): change invocation of make to $(MAKE).
4951 Mon Mar 8 14:52:11 1993 Ken Raeburn (raeburn@cambridge)
4953 * config.guess: Recognize i386-ibm-aix (PS/2).
4954 * configure.in: Use config/mh-aix386 file for it.
4958 * Makefile.in (GCC_FOR_TARGET): Eliminated definition; use
4959 CC_FOR_TARGET instead.
4960 (BASE_FLAGS_TO_PASS): Pass GCC_FOR_TARGET=$(CC_FOR_TARGET).
4964 * Makefile.in: Add sim to list of directories sent with gdb
4968 * configure.in: Put back mips-dec-bsd* case.
4973 * configure.in (vax-*-ultrix2*): Add Ultrix 2.2 triplet.
4974 * config.guess: Change 'VAX*:ULTRIX:*:*' to 'VAX*:ULTRIX*:*:*'.
4975 * config/mh-vaxult2: New file.
4977 Tue Mar 2 18:11:03 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4979 * configure.in: remove no-op mips-dec-bsd* in "case $target"
4981 * Makefile.in (dir.info): only run gen-info-dir if it exists,
4982 (install-info): install dir.info only if it exists,
4983 (all-expect, install-expect): pass along X11_FLAGS_TO_PASS
4987 * configure.in: For vms target, skip bfd, ld, binutils. Do build
4988 gas for mips-dec-bsd.
4992 * configure (makesrcdir): If ${srcdir} is relative and not ".",
4993 and ${subdir} is not ".", set makesrcdir based on ${invsubdir}.
4997 * configure.in: Added "dejagnu" to hosttools list.
5001 * config.sub, configure.in, config.guess: Add support
5002 for Bosx, an AIX variant from Bull.
5007 * devo/dejagnu: Initial creation of devo/dejagnu.
5008 Migrated dejagnu testcases and support files for testing software
5009 tools to reside as subdirectories, currently called "testsuite",
5010 within the directory of the software tool. Migrated all programs,
5011 support libraries, etc. beloging to dejagnu proper from
5012 devo/deja-gnu to devo/dejagnu. These files were moved "as is"
5013 with no modifications. The changes to these files which will
5014 allow them to configure, build, and execute properly will be made
5019 * Makefile.in: Change send_pr to send-pr.
5020 * configure.in: Likewise.
5021 * send_pr: Renamed directory to send-pr.
5025 * Makefile.in: Add some extra semi-colons (needed if SHELL=bash).
5029 * README: Update for gdb-4.8 release.
5030 * Makefile.in (gdb.tar.Z): Add texinfo/tex3patch. Build
5031 gdb-xxx.tar.z (gzip'd) file also.
5033 Thu Feb 18 09:16:17 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5035 * Makefile.in: make all-diff depend on all-libiberty
5039 * config.guess: add vax-ultrix in the spirit of mips-ultrix.
5041 Tue Feb 16 05:57:15 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5043 * configure.in, Makefile.in: add hello, tar, gzip, recode, indent
5047 * Makefile.in (DEVO_SUPPORT): Remove etc directory
5048 (ETC_SUPPORT): Only add the files GDB wants from etc/.
5049 (gdb.tar.Z): Use ETC_SUPPORT. Use byacc when building the file.
5051 Thu Feb 11 20:14:28 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5053 * Makefile.in: makeinfo binary is in a new location
5057 * config.sub: Accept -ecoff as an OS.
5059 * Makefile.in: Various changes to eliminate a level of make
5060 recursion and reduce the required command line length.
5061 (BASE_FLAGS_TO_PASS): New variable holding flags passed to all
5063 (EXTRA_HOST_FLAGS, EXTRA_TARGET_FLAGS, EXTRA_GCC_FLAGS): New
5064 variables holding settings for specific sub-makes.
5065 (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS, GCC_FLAGS_TO_PASS): Rewrote
5066 in terms of BASE_FLAGS_TO_PASS.
5067 (TARGET_LIBS): New variable listing directories which use
5068 TARGET_FLAGS_TO_PASS.
5069 (subdir_do): Eliminated.
5070 (do-*): New set of targets to replace subdir_do.
5071 (various): All targets which used subdir_do now depend on do-*.
5072 (local-clean): Renamed from do_clean.
5073 (local-distclean): New target, dependency of distclean and
5075 (install-info): Don't create directories. Depend on dir.info
5076 rather than calling make recursively.
5077 (install-dir.info): Eliminated.
5078 (install-info-dirs): Create all info directories here.
5079 (dir.info): Depend upon do-install-info.
5081 * test-build.mk (HOLES): Added false.
5085 * config.guess: Recognize BSDI and BSDJ (Jolitz 386bsd).
5087 Thu Feb 4 20:49:18 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5089 * Makefile.in (info): remove dependency on all-texinfo. The
5090 problem was really in texinfo/C, not at this level.
5094 * Makefile.in (info): Added dependency on all-texinfo (PR 2112).
5098 * Makefile.in (make-gdb.tar.Z): Change BISON to 'bison -y' for
5103 * configure: Include srcdir in message about target of link not
5104 being found. Don't convert `-' to `_' in `with' options being
5107 Tue Feb 2 18:57:59 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5109 * configure.in: add uudecode to host_tools
5111 * Makefile.in: added {all,install}-uudecode targets, added them to
5112 the appropriate lists
5116 * Makefile.in (all-gcc): Added dependency on all-gas.
5118 * configure.in (mips-*-*): Build ld and binutils.
5122 * configure: check return code from mkdir, print error message and
5127 * Makefile.in (make-gdb.tar.Z): New location for texinfo.tex.
5131 * test-build.mk (HOLES): Added tar, cpio and uudecode.
5135 * config.sub (h8500): Recognize this as a cpu type.
5137 Sat Jan 23 20:32:01 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5139 * configure: source directory missing is no longer a warning
5141 * configure.in: recognize irix[34]* instead of irix[34]
5143 * Makefile.in: define and pass down X11_LIB
5145 * config/mh-sco: define X11_LIB to the mess that SCO ODT requires
5149 * guess-systype: Renamed to ...
5150 * config.guess: ... by popular request.
5151 * configure.in, Makefile.in: Update accordingly.
5156 + Add Convex, Cray/Unicos, and Encore/Multimax support.
5157 + Execute ./dummy instead of assuming . is in PATH.
5161 * guess-systype: New shell script. Attempts to guess the
5162 canonical host name of the executing host.
5163 Only a few hosts are supported so far.
5164 * configure: Call guess-systype if no host is specified.
5168 * Makefile.in (gcc-no-fixedincludes): Made to work with current
5174 * Makefile.in (GCC_FLAGS_TO_PASS): New variable.
5175 (all-gcc, install-gcc, subdir_do): Use it.
5179 * Makefile.in: Rename uninstalled gcc driver from gcc to xgcc.
5183 * Makefile.in: Removed explicit setting of SUBDIRS. SUBDIRS is now
5184 set exclusively by configure, using configure.in .
5186 Wed Jan 6 13:44:11 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5188 * test-build.mk: set $PATH for all builds
5190 * Makefile.in: pass TARGET_FLAGS_TO_PASS for xiberty and libm
5194 * Makefile.in (GCC_FOR_TARGET): Supply a default that matches
5195 the one used in gcc/Makefile.in, so that a null expansion doesn't
5196 override the one needed to build gcc with a native cc.
5201 * configure: Accept -with arguments.
5205 * Makefile.in: added h8300sim
5209 * config/mh-sco: Don't override BISON definition.
5211 * build-all.mk: If canonhost is i386-unknown-sco3.2v4, change it
5212 to i386-sco3.2v4. Set TARGETS and CFLAGS for i386-sco3.2v4.
5213 (all-cygnus, native, build-cygnus): Make
5214 $(canonhost)-stamp-3stage-done, not $(host)....
5215 * test-build.mk (stamp-3stage-compared): Use tail +10c for
5216 i386-sco3.2v4. Added else true to if command.
5220 * config.sub: (from FSF) Sequent uses a BSD-like OS.
5224 * configure.in (i[34]86-*-isc*): added; uses mh-sysv.
5226 Thu Dec 24 17:26:24 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5228 * configure.in: don't remove binutils from Solaris builds
5232 * Makefile.in: get rid of earlier definitions for *clean,
5233 also handle the recursive info rule better
5237 * Makefile.in (mostlyclean, distclean, realclean): Fix to
5238 do more-or-less the right thing.
5242 * Makefile.in: Add lines defining CC and CXX, and use CXX rather
5243 than gcc in definitions of CXX_FOR_BUILD and CXX_FOR_TARGET.
5245 Tue Dec 15 00:34:32 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5247 * Makefile.in: change all $(host_cpu)-$(host_vendor)-$(host_os) to
5250 * configure.in: split the configdirs list into 4 categories (native
5251 v. cross, library v. tool) and handle the cross-only and native-
5252 only in more reasonable (and correct!) way.
5254 Mon Dec 14 17:04:22 1992 Stu Grossman (grossman at cygnus.com)
5256 * configure.in (hppa*-*-*): Don't remove bfd and gdb from
5259 Sun Dec 13 00:37:26 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5261 * Makefile.in: extensive cleanup:: removed all of the explicit
5262 clean-* targets, collapsed many wrappers around subdir_do into
5263 one, added additional targets to satisfy standards.texi, deleted
5264 some old targets, some changes for consistency
5266 Fri Dec 11 20:18:02 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5268 * configure.in: handle some programs as cross-only, and others as
5271 * test-build.mk: handle partial holes in a more generic manner
5273 * Makefile.in: m4 depends on libiberty
5275 Mon Dec 7 06:43:27 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5277 * config/mh-sco: don't default $(CC) to gcc
5279 Thu Dec 3 21:52:11 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5281 * configure.in: add m4, textutils, fileutils, sed, shellutils,
5282 time, wdiff, and find to configdirs
5284 * Makefile.in: all, clean, and install rules for the new programs
5285 added to configure.in
5287 Mon Nov 30 14:54:34 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5289 * configure.in: use mh-sun for all *-sun-* hosts
5291 * config/mh-solaris: rework standard X location to use
5292 $OPENWINHOME, if defined.
5294 * config/mh-sun: handle X11 include locations
5296 * config/mh-decstation: define NeedFunctionPrototypes to 0, to
5297 work around dain-bramaged DECwindows include files
5299 Fri Nov 27 18:35:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5301 * Makefile.in: define flags for X11 include files and library file
5302 locations, pass them down to the programs that need this info
5304 * build-all.mk: added a 'native' target, to 3stage the native toolchain
5306 * config/{mh-hpux,mh-solaris}: define the "standard" locations for
5307 the vendor supplied X11 headers and libraries
5309 Sun Nov 22 18:59:13 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5311 * configure.in: start building libg++ for HP-UX targets
5315 * README: Update references to files moved into etc/.
5319 * config.sub (i386sol2, i486sol2): i[34]86-unknown-solaris2.
5320 * configure.in (i[34]86-*-solaris2*): Use config/mh-sysv4.
5324 * configure: accept dash as well as underscore in long option
5325 names for FSF compatibility.
5329 * config.sub: added -sco3.2v4 support from FSF.
5331 Sun Nov 8 21:14:30 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5333 * configure.in: expand the section that adds or removes
5334 directories from the list of programs to build, to handle native
5335 vs. cross in addition to host v. native
5339 * Makefile.in: Replace C++ in macro names with CXX.
5340 This is less likely to break ...
5342 Sat Nov 7 15:16:58 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5344 * test-build.mk: add -w to GNU_MAKE
5346 Fri Nov 6 23:10:37 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5348 * config.sub: remove 'sparc'-->'sparc-sun' default transformation,
5349 add 'sparc' to list of recognized cpus. This needed to make
5350 'sparc-aout' expand to 'sparc-unknown-aout' instead of 'sparc-sun-aout'.
5351 Delete some redundant ose68 variants. Recognize -wrs as an os,
5352 then changes that into $CPU-wrs-vxworks.
5354 * configure.in: remove most references to gdbtest, regularize
5355 target based program removal
5357 * test-build.mk: import from p3 tree (many fixes and changes)
5361 * Makefile.in: added rules to handle tcl, tk, and expect
5363 * configure.in: handle those directories if they exist
5365 Thu Nov 5 14:35:41 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5367 * config.sub: removed bogus hppabsd and hppahpux names, since
5368 "hppa" is not a valid cpu (hppa1.1 or hppa1.0 are, though)
5370 Thu Oct 29 00:12:41 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5372 * Makefile.in: all-gcc now depends on all-binutils. all-libg++
5373 depends upon all-xiberty
5375 * Makefile.in: changes from p3, including:
5379 * Makefile.in (XTRAFLAGS): include newlib directories if
5380 newlib/Makefile exists, rather than if host != target.
5384 * Makefile.in: added -nostdinc to XTRAFLAGS if we are using gcc
5385 from the same source tree and not building a cross-compiler. This
5386 matters for the libg++ configuration if reconfiguring a tree that
5387 has already been installed.
5391 * Makefile.in: added -I for newlib/targ-include to XTRAFLAGS, to
5392 pick up the machine and system specific header files.
5394 * Makefile.in: added AS_FOR_TARGET, passed down in
5395 TARGET_FLAGS_TO_PASS. Added CC_FOR_BUILD, which is intended to be
5396 the C compiler to use to create programs which are run in the
5397 build environment, set it to default to $(CC), and passed it down
5398 in FLAGS_TO_PASS and TARGET_FLAGS_TO_PASS.
5402 * Makefile.in: add $(host) = $(target) tests back to *_FOR_TARGET.
5403 We need them for unusual native builds, like systems without
5406 * configure: also define $(host_canonical) and
5407 $(target_canonical), which are the full, canonical names for the
5408 given host and target
5412 * Makefile.in: Added separate definitions for C++.
5416 * configure.in (configdirs): Add deja-gnu.
5420 * README: Update for configure.texi and gdb-4.7 release.
5424 * Makefile.in: Move "all" target to top of file.
5425 Previously, first target was ".PHONY" which caused BSD4.4 make
5426 to build .PHONY when make was run without arguments.
5430 * Makefile.in: Add COPYING.LIB to GDB releases, now that there's
5431 Library-copylefted code in libiberty.
5435 * config.sub: Replace m68kmote with plain old m68k.
5439 * Makefile.in: Remove space from blank line, avoid Make complaints.
5443 * config.sub: Complain if no argument is given. Added support for
5444 386bsd as OS and target alias.
5448 * Makefile.in (XTRAFLAGS): include newlib directories if
5449 newlib/Makefile exists, rather than if host != target.
5451 Mon Oct 5 03:00:09 1992 Mark Eichin (eichin at tweedledumber.cygnus.com)
5453 * config.sub: recognize sparclite-wrs-vxworks.
5455 * Makefile.in (install-xiberty): added *-xiberty make rules (from
5456 p3.) Added clean-xiberty to clean.
5458 Thu Oct 1 17:59:19 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5460 * configure.in: use *-*-* instead of nested cases for host and target
5464 * Makefile.in: added -nostdinc to XTRAFLAGS if we are using gcc
5465 from the same source tree and not building a cross-compiler. This
5466 matters for the libg++ configuration if reconfiguring a tree that
5467 has already been installed.
5471 * config.sub (i486v/i486v4): Merge in from FSF version.
5475 * configure: only set PWD if it is already set.
5479 * configure: just set PWD=`pwd` at the top, since Ultrix sh
5480 doesn't have unset and all success paths (and most error paths)
5481 out set it anyway. (Note: should change all uses of ${PWD=`pwd`}
5482 to just ${PWD} to avoid confusion.)
5486 * configure: always set $(tooldir) to $(libdir)/$(target_alias),
5487 even for a native compilation.
5491 Changes to make the gdb.tar.Z rule work better.
5493 * Makefile.in (GDB_SUPPORT_DIRS): Add opcodes.
5494 (DEVO_SUPPORT): Add configure.texi.
5495 (bfd-ilrt.tar.Z): Remove ancient rule.
5499 * Makefile.in: added -I for newlib/targ-include to XTRAFLAGS, to
5500 pick up the machine and system specific header files.
5502 * configure.in, config.sub: added new target m68010-adobe-scout,
5503 with alias of adobe68k. Changed configure.in to check for
5504 -scout before -sco* to avoid a false match.
5506 * Makefile.in: added AS_FOR_TARGET, passed down in
5507 TARGET_FLAGS_TO_PASS. Added CC_FOR_BUILD, which is intended to be
5508 the C compiler to use to create programs which are run in the
5509 build environment, set it to default to $(CC), and passed it down
5510 in FLAGS_TO_PASS and TARGET_FLAGS_TO_PASS.
5514 * Makefile.in: added TARGET_FLAGS_TO_PASS, CC_FOR_TARGET,
5515 AR_FOR_TARGET, RANLIB_FOR_TARGET, NM_FOR_TARGET. Pass
5516 TARGET_FLAGS_TO_PASS, which defines CC, AR, RANLIB and NM as the
5517 FOR_TARGET variants, to newlib and libg++.
5521 * Makefile.in (all-gas, all-gdb): Require all-opcodes to be built
5526 * config.sub: Accept `elf' as an environment.
5530 * Makefile.in (all-opcodes): cd into the right directory
5534 * configure: added -program_transform_name option, used as
5535 argument to sed when installing programs.
5536 configure.texi: added documentation for -program_prefix,
5537 -program_suffix and -program_transform_name.
5541 * config.sub: Accept i486 where i386 ok.
5545 * config.sub: accept we32k
5549 * config.sub, configure.in: accept OSE68000 and OSE68k.
5551 * Makefile.in: don't create all directories for ``make install'';
5552 let the subdirectories create the ones they need.
5554 Tue Aug 11 23:13:17 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5556 * COPYING: new file, GPL v2
5558 Tue Aug 4 01:12:43 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5560 * Makefile.in: use the new gen-info-dir, which needs a template
5561 argument (which also lives in texinfo)
5563 * configure.texi, standards.texi: fix INFO-DIR-ENTRY
5565 Mon Aug 3 15:41:28 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5567 * config/mh-solaris: removed the -xs from CFLAGS (let the people
5568 with Sun's C compiler deal with it themselved)
5572 * config.sub (ncr3000): Change i386 to i486.
5574 Thu Jul 23 00:12:17 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5576 * Makefile.in: add install-rcs, install-grep to
5577 install-no-fixedincludes, removed install-bison and install-libgcc
5581 * configure.in: grab the HPUX makefile fragment if on HPUX
5585 * Makefile.in: eradicate bison spoor (ditto libgcc).
5586 configure.in: recognise m68{k,000}-ericsson-OSE.
5587 es1800 is alias for m68k-ericsson-OSE
5589 Sun Jul 19 17:49:02 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5591 * configure.in: rearrange the parts that remove programs from
5592 configdirs, based now on HOST==TARGET or by canonical triple.
5596 * test-build.mk: recurse explicitly with -f test-build.mk when
5597 appropriate. predicate stage3 and comparison on the existence
5598 of gcc. That is, if gcc isn't around, we aren't three-staging.
5599 On very clean, also remove ...stamp-co. Build in-place before
5604 * Makefile.in, configure.in: add tgas
5608 * Makefile.in: a number of changes merged in from progressive.
5610 * configure.in: add libm.
5612 * .cvsignore: ignore some stuff that comes from test-build.mk.
5614 Wed Jul 8 00:01:30 1992 Stu Grossman (grossman at cygnus.com)
5616 * config/mh-solaris: Use -xs when compiling so that Sun-C puts
5617 a symbol-table into the executable.
5621 * config.sub: Add es1800 (m68k-ericsson-es1800).
5625 * configure: Add program_suffix (parallel to program_prefix)
5626 * Makefile.in: adjust directory-creating script for losing decstation
5630 * configure: Minor $subdir-related fixes.
5634 * configure: fix various problems with propogating
5635 makefile_target_frag in subdirs.
5636 * configure.in: config libgcc if its there
5638 Fri Jun 19 15:19:40 1992 Stu Grossman (grossman at cygnus.com)
5640 * config.sub: HPPA merge.
5644 * config/mh-ncr3000 (INSTALL): Don't use /usr/ucb/install,
5645 it is broken on ncr 3000's.
5647 Sun Jun 14 10:29:19 1992 John Gilmore (gnu at cygnus.com)
5649 * Makefile.in: Replace all-bison with all-byacc in all
5650 dependency lines for other tools (which now use byacc).
5652 Fri Jun 12 22:21:57 1992 John Gilmore (gnu at cygnus.com)
5654 * config.sub: Add sun4sol2 => sparc-sun-solaris2.
5656 Tue Jun 9 17:18:11 1992 Fred Fish (fnf at cygnus.com)
5658 * config/{mh-ncr3000, mh-sysv4}: Add INSTALL.
5662 * Makefile.in: make gprof rules similar to byacc rules (instead of
5663 vestigal $(unsubdir) that didn't work...)
5667 * config.sub: Add support for Linux.
5668 * Makefile.in: Use $(FLAGS_TO_PASS) more consistently
5669 (at least for libg++).
5673 * configure.texi: fix doc for the -nfp option to configure
5677 * Makefile.in (all-binutils): ar needs flex, so depend on all-flex.
5679 Sun May 31 15:04:08 1992 Mark Eichin (eichin at cygnus.com)
5681 * config.sub: changed [^-]+ to [^-][^-]* so that it works under
5682 Sun sed. (BSD 4.3 sed doesn't handle [^-]+ either.)
5683 * configure.in: added solaris* host_makefile_frag hook.
5685 Sun May 31 01:10:34 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5687 * config.sub: changed recognition of m68000 so that various
5688 m68k types can be specified via m680[01234]0
5690 Sat May 30 21:01:06 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5692 * config.sub (basic_machine): fix sed so that '-foo' isn't
5693 completely substituted out while .+'-foo' loses the '-foo'
5697 * config.sub ($os): Add -aout.
5701 * configure: If host_makefile_frag is absolute, don't
5702 prefix ${invsubdir} (relevant to libg++ auto-configure).
5706 * Makefile.in (tooldir): Define it.
5707 (all-ld): Depend on all-flex.
5711 * Makefile.in (check): Fix libg++ special case.
5715 * configure: do not bury `pwd` into config.status, thus do fewer
5718 * configure: print the "Building in" message only when building in
5719 other than "." AND verbose.
5721 * configure: remove -s, rework -v to better accomodate guested
5724 * standards.texi: updated to 3 may, fixed librid <-> libdir typo.
5728 * Makefile.in: macroize flags passed on recursion. remove
5733 * configure: get makesrcdir right for subdirs deeper than 1.
5735 * Makefile.in: pass INSTALL, INSTALL_DATA, INSTALL_PROGRAM on
5740 * Makefile.in: don't print subdir_do or recursion lines.
5744 * standards.texi: added menu item.
5746 * Makefile.in: build and install standards.info.
5748 * standards.texi: new file.
5752 * configure: test for and move config.status pieces from
5757 * config/mh-delta88, config/mh-ncr3000: Replace MINUS_G with
5758 CFLAGS per new configuration strategy.
5759 * configure: Test for existance of files before trying to mv
5760 them, to avoid numerous non-existance messages.
5764 * configure: correct final line of config.status.
5766 * configure: patch from eggert. Avoids a protection problem if
5767 the original Makefile.in is read only.
5769 * configure: use move-if-change from gcc to create config.status.
5770 Some makefiles depend on config.status to tell if a directory
5771 has been reconfigured for a different host. This change
5772 prevents those directories from remaking everything in the case
5773 where the reconfig was only intended to rebuild a Makefile.
5775 * configure: test for config.sub with "config.sub sun4" rather
5776 than "config.sub ${host_alias}". Otherwise we can't tell a bad
5777 host alias from a missing config.sub.
5781 * Makefile.in: explicitly pass CFLAGS on recursion. no longer pass
5782 MINUS_G (this can be done with CFLAGS). Default CFLAGS to -g.
5786 * configure: mkdir ${subdir} as needed.
5790 * Makefile.in,configure.in: added autoconf.
5794 * Makefile.in: no longer pass against on recursion.
5796 * Makefile.in: added .NOEXPORT: so that stray makefile_frag
5797 definitions are not inherited.
5799 * configure: correct makesrcdir when subdir is .
5803 * configure: Add support for 'subdirs' variable, which is
5804 like 'configdirs', except that configure doesn't re-invoke
5805 itself for subdirs, it just creates a Makefile for each subdir.
5806 * configure.texi: Document subdirs.
5808 Mon Apr 13 18:50:16 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5810 * configure.in: added flex to configdirs
5814 * Makefile.in: remove clean-stamps from clean.
5816 Sat Apr 11 03:52:03 1992 John Gilmore (gnu at cygnus.com)
5818 * configure.in: Add gdbtest to configdirs.
5822 * Makefile.in (MINUS_G): Add macro, default to -g, pass on
5824 * configure.in: Recognize new ncr3000 config.
5828 * Makefile.in, configure.in: removed references to gdbm.
5832 * config.sub: Don't canonicalize os value
5833 newsos* to bsd (readline needs to check for newsos).
5834 (This fix was earlier made Jan 31, but got re-broken.)
5836 Mon Apr 6 14:34:08 1992 Stu Grossman (grossman at cygnus.com)
5838 * configure.in: sco is an os, not a vendor!
5840 * configure: Quote $( better. Keep various shells happy.
5844 * Makefile.in: eliminate stamp-files.
5848 * Makefile.in: add send_pr. remove "force" from .stmp-gprof rule.
5849 Supress echoing of all the "if [ -d ... $(MAKE)" lines.
5853 * config.sub: fix iris/iris3.
5857 * configure: re-add -rm.
5861 * Maskefile.in: add .stmp-rcs to all.
5863 * configure.in: remove gas from rs6000 build, use aix host fragment.
5867 * configure: pass down site_option during recursion.
5869 Thu Mar 19 16:49:36 1992 Stu Grossman (grossman at cygnus.com)
5871 * Makefile.in (all.cross): Add .stmp-bfd .stmp-readline.
5875 * configure: Change exec_prefix so that it really defaults to prefix.
5879 * Makefile.in, configure.in: Add support for mmalloc library.
5883 * Makefile.in: add stmp dependencies for a few more things.
5887 * configure: adjusted error message on objdir/srcdir configure
5888 collision, per john's suggestion.
5890 * Makefile.in: add libiberty stmp to all and all.cross.
5894 * Makefile.in: remove force dependencies, add grep to all.
5898 * Makefile.in: drop flex. make stamp files work.
5900 * configure: added test for conflicting configuration in srcdir,
5901 remove trailing slashes from srcdir. Otherwise emacs gdb mode
5902 gets cranky. use relative paths for configure and srcdir
5903 whenever possible. Send some error messages to stderr that were
5908 * Makefile.in: Fix libg++ rule to check for gcc directory
5909 before using gcc/gcc. Also pass XTRAFLAGS.
5911 Thu Mar 5 21:45:07 1992 K. Richard Pixley (rich@sendai)
5913 * Makefile.in: added stmp-files so that directories aren't polled
5914 when they are already built.
5916 * configure.texi: fixed a node pointer problem.
5918 Thu Mar 5 12:05:58 1992 Stu Grossman (grossman at cygnus.com)
5920 * config.sub configure.in config/mh-irix4 gdb/configure.in
5921 gdb/mips-tdep.c gdb/mipsread.c gdb/procfs.c gdb/signame.h
5922 gdb/tm-irix3.h gdb/tm-mips.h gdb/xm-irix4.h gdb/config/mt-irix3
5923 gdb/config/mh-irix4 texinfo/configure.in: Port to SGI Irix-4.x.
5927 * configure: -recurring becomes -silent. corrected help message
5930 * Makefile.in: mkdir $(exec_prefix) and $(tooldir).
5934 * configure: when building Makefile for crosses, replace
5935 tooldir and program_prefix. default srcdir from location of
5936 config.sub. remove "for host in hosts" and "for target in
5941 * Makefile.in: Do not pass bindir or mandir to cvs.
5945 * Makefile.in, configure.in: removed traces of namesubdir,
5946 -subdirs, $(subdir), $(unsubdir), some rcs triggers. Forced
5947 copyrights to '92, changed some from Cygnus to FSF.
5949 * configure.texi: remove most references to multiple hosts,
5950 multiple targets, subdirs, etc.
5952 * configure.man: removed rcsid. reference config.sub not
5955 * Makefile.in: mkdir $(infodir) on install-info.
5957 Wed Feb 19 15:41:13 1992 John Gilmore (gnu at cygnus.com)
5959 * configure.texi: Explain better about .gdbinit and about
5960 the environment that configure.in sections run in.
5962 Fri Feb 7 07:55:00 1992 John Gilmore (gnu at cygnus.com)
5964 * configure.in: Ultrix is only a decstation if it's a MIPS.
5966 Fri Jan 31 21:54:51 1992 John Gilmore (gnu at cygnus.com)
5968 * README: DOC.configure => cfg-paper.texi.
5970 Fri Jan 31 21:48:18 1992 Stu Grossman (grossman at cygnus.com)
5972 * config.sub (near case $os): Don't convert newsos* to bsd!
5974 Fri Jan 31 02:27:32 1992 John Gilmore (gnu at cygnus.com)
5976 * Makefile.in: Reinstall change from gdb-4.3 that reduces
5977 the number of copies of COPYING that go into the GDB tar file.
5979 Thu Jan 30 16:17:30 1992 Stu Grossman (grossman at cygnus.com)
5981 * bfd/configure.in, config/mh-sco, gdb/config/mh-i386sco,
5982 gdb/config/mt-i386v32, gdb/configure.in, readline/configure.in:
5983 Fix SCO configuration stuff.
5985 Tue Jan 28 23:51:07 1992 Per Bothner (bothner at cygnus.com)
5987 * Makefile.in: For libg++, make sure the -I pointing
5988 to the gcc directory goes *after* all the libg++-local -I flags.
5989 Also, move just-gcc dependency from just-libg++ to all-libg++.
5991 Tue Jan 28 12:56:24 1992 Stu Grossman (grossman at cygnus.com)
5993 * configure: Change -x to -f to keep Ultrix /bin/test happy.
5995 Sat Jan 18 17:45:11 1992 Stu Grossman (grossman at cygnus.com)
5997 * Makefile.in (make-gdb.tar.Z): Remove texinfo targets.
5999 Sat Jan 18 17:03:21 1992 Fred Fish (fnf at cygnus.com)
6001 * config.sub: Add stratus configuration frags. Also
6004 Sat Jan 18 15:35:29 1992 Stu Grossman (grossman at cygnus.com)
6006 * Makefile.in (DEV_SUPPORT): add configure.man.
6008 * config.sub(Decode manufacturer-specific): add -none*.
6010 Fri Jan 17 17:58:05 1992 Stu Grossman (grossman at cygnus.com)
6012 * Makefile.in: remove form feeds to make Sun's make happy.
6013 (DEVO_SUPPORT): DOC.configure => cfg-paper.texi.
6015 Sat Jan 4 16:11:44 1992 John Gilmore (gnu at cygnus.com)
6017 * Makefile.in (AR_FLAGS): Make quieter.
6019 Thu Jan 2 22:57:12 1992 John Gilmore (gnu at cygnus.com)
6021 * configure.in: Add libg++.
6022 * configure: When verbose, don't output the command line at each
6023 level; it will be unremarkably the same as the previous version,
6024 which will be the same as what the user typed.
6026 Fri Dec 27 16:26:47 1991 K. Richard Pixley (rich at cygnus.com)
6028 * configure.in, Makefile.in: fix clean-info, add flex. add
6031 * configure: be less sensitive to spaces in Makefile.in. Do not
6032 look for sources in "..". Doing so breaks subdirectories that
6033 might have their own configure. If a subdir has it's own
6034 configure script, use it.
6036 Thu Dec 26 16:30:26 1991 K. Richard Pixley (rich at cygnus.com)
6038 * cfg-paper.texi: some changes suggested by rms.
6040 Thu Dec 26 10:13:36 1991 Fred Fish (fnf at cygnus.com)
6042 * config.sub: Merge in some small additions from the FSF version,
6043 taken from the gcc distribution, to bring the Cygnus and FSF
6044 versions into closer sync.
6046 Fri Dec 20 11:34:18 1991 Fred Fish (fnf at cygnus.com)
6048 * configure.in: Changed svr4 references to sysv4.
6050 Thu Dec 19 15:54:29 1991 K. Richard Pixley (rich at cygnus.com)
6052 * configure: added -V for version number option.
6054 Wed Dec 18 15:39:34 1991 K. Richard Pixley (rich at cygnus.com)
6056 * DOC.configure, cfg-paper.texi: revised, updated, and texinfo'd.
6057 renamed from DOC.configure to cfg-paper.texi.
6059 Mon Dec 16 23:05:19 1991 K. Richard Pixley (rich at rtl.cygnus.com)
6061 * configure, config.subr, config.sub: config.subr is now
6064 Fri Dec 13 01:17:06 1991 K. Richard Pixley (rich at cygnus.com)
6066 * configure.texi: new file, in progress.
6068 * Makefile.in: build info file and install the man page for
6071 * configure.man: new file, first cut.
6073 * configure: find config.subr again now that configuration "none"
6074 has gone. removed all traces of the -ansi option. removed all
6075 traces of the -languages option.
6077 * config.subr: resync from rms.
6079 Wed Dec 11 22:25:20 1991 K. Richard Pixley (rich at rtl.cygnus.com)
6081 * configure, config.sub, config.subr: merge config.sub into
6082 config.subr, call the result config.subr, remove config.sub, use
6085 * Makefile.in: revised install for dir.info.
6087 Tue Dec 10 00:04:35 1991 K. Richard Pixley (rich at rtl.cygnus.com)
6089 * configure.in: add decstation host makefile frag.
6091 * Makefile.in: BISON now bison -y again. also install-gcc on
6092 install. clean-gdbm on clean. infodir belongs in datadir.
6093 Make directories for info install. Build dir.info here then
6096 Mon Dec 9 16:48:33 1991 K. Richard Pixley (rich at rtl.cygnus.com)
6098 * Makefile.in: fix for bad directory tests.
6100 Sat Dec 7 00:17:01 1991 K. Richard Pixley (rich at rtl.cygnus.com)
6102 * configure: \{1,2\} appears to be a sysv'ism. Use a different
6103 regexp. -srcdir relative was being handled incorrectly.
6105 * Makefile.in: unwrapped some for loops so that parallel makes
6106 work again and so one can focus one's attention on a particular
6109 Fri Dec 6 00:22:08 1991 K. Richard Pixley (rich at rtl.cygnus.com)
6111 * configure: added PWD as a stand in for `pwd` (for speed). use
6112 elif wherever possible. make -srcdir work without -objdir.
6113 -objdir= commented out.
6115 Thu Dec 5 22:46:52 1991 K. Richard Pixley (rich at rtl.cygnus.com)
6117 * configure: +options become --options. -subdirs commented out.
6118 added -host, -datadir. Renamed -destdir to -prefix. Comment in
6119 Makefile now at top of generated Makefile. Removed cvs log
6120 entries. added -srcdir. create .gdbinit only if there is one
6123 * Makefile.in: idestdir and ddestdir go away. Added copyrights
6124 and shift gpl to v2. Added ChangeLog if it didn't exist. docdir
6125 and mandir now keyed off datadir by default.
6127 Fri Nov 22 07:38:11 1991 K. Richard Pixley (rich at rtl.cygnus.com)
6129 * Freshly created ChangeLog.
6136 version-control: never