3 * cli/cli-decode.c (add_cmd): Initialize pre_show_hook in
8 * remote.c (struct packet_reg): Add field in_g_packet.
9 (struct remote_state): Rename field g_packet to regs;
10 (free_remote_state): Update.
11 (init_remote_state): Add pseudo-registers to table. Initialize
12 in_g_packet. Drop sentinal from table.
13 (packet_reg_from_regnum, packet_reg_from_pnum): Update.
14 (remote_fetch_registers): Handle registers not in the g-packet.
15 (remote_store_registers): Ditto.
19 * gdbarch.sh (TARGET_CHAR_SIGNED): Do not specify the print
24 * s390-tdep.c (s390_pop_frame_regular): Make sure the saved_regs
25 array is actually set before we try to use it.
27 * s390-tdep.c (s390_frame_saved_pc_nofix): If we get the saved PC
28 out of the return address register, cache that in the frame's
29 extra info, just as if we'd gotten it from the saved regs array;
30 that way, it's not a lie to set the saved_pc_valid flag.
32 * s390-tdep.c (s390_get_frame_info): Give orig_sp a reasonable
33 value, even when fextra_info->stack_bought can't be trusted,
35 * s390-tdep.c (s390_readinstruction): Don't call
36 info->read_memory_func to read zero bytes. Some targets'
37 xfer_memory functions can't cope with that.
39 * gdbarch.sh (TARGET_CHAR_SIGNED): New macro.
40 * gdbarch.c, gdbarch.h: Regenerated.
41 * gdbtypes.c (build_gdbtypes): If TARGET_CHAR_SIGNED is zero,
42 set the TYPE_FLAG_UNSIGNED bit on the type.
43 * s390-tdep.c (s390_gdbarch_init): On the S/390, characters
44 are unsigned by default.
45 * rs6000-tdep.c (rs6000_gdbarch_init): Same for PowerPC and
50 * corefile.c (do_captured_read_memory_integer,
51 safe_read_memory_integer): New functions.
52 * gdbcore.h (safe_read_memory_integer): Export.
53 * arm-tdep.c (arm_scan_prologue): Use safe_read_memory_integer,
54 to read the frame value, to capture calls to error().
58 * s390-tdep.c (s390_register_name): S390_LAST_REGNUM is, in fact,
59 the last register number, not one greater than the last register
62 * s390-tdep.c (s390_register_virtual_type): Replace clever but
63 incorrect range comparison with correct, legible equivalent.
65 * s390-tdep.c (s390_register_raw_size): Replace unnecessarily
66 obscure range comparison with legible equivalent.
70 * config/pa/tm-hppa.h (STORE_RETURN_VALUE): Use hppa_store_return_value.
71 (EXTRACT_RETURN_VALUE): Similarly.
72 * hppa-tdep.c (hppa_store_return_value): New function.
73 (hppa_extract_return_value): New function.
75 * infttrace.c (child_acknowledge_created_inferior): Pass
76 correct argument to add_thread.
77 (update_thread_state_after_attach): Likewise.
81 * config/arm/tm-arm.h: Properly define SOFTWARE_SINGLE_STEP_P.
82 Always define SOFTWARE_SINGLE_STEP.
83 * config/arm/tm-embed.h: Properly define SOFTWARE_SINGLE_STEP_P.
84 * arm-tdep.c (arm_get_next_pc, thumb_get_next_pc, bitcount,
85 shifted_reg_val): Always compile these functions.
86 (arm_software_single_step): Fix second argument in function calls.
90 * arch-utils.h (gdbarch_info_init): Declare.
91 * arch-utils.c: Include "arch-utils.h".
92 (gdbarch_info_init): Define.
93 (set_endian, set_architecture, set_gdbarch_from_file)
94 (initialize_current_architecture): Use gdbarch_info_init.
95 * rs6000-nat.c (set_host_arch): Ditto.
96 * cris-tdep.c (cris_version_update, cris_mode_update)
97 (cris_abi_update): Ditto.
101 * c-lang.c (c_emit_char): Print ASCII 11 as '\v', to match
102 ISO C, and our parser. Print ASCII 0 as '\0', since that's what
103 people are used to seeing.
107 * c-lang.c (c_printstr, c_builtin_types, cplus_builtin_types):
110 * Makefile.in (c-exp.tab.o): Delete duplicate build rule. Fix
111 dependency list on remaining build rule.
115 * ser-tcp.c (tcp_open): Disable Nagle algorithm which
116 improves performance in some cases.
120 * armbsd-nat.c: Remove file, renamed to armnbsd-nat.c.
121 * armnbsd-nat.c: New file, renamed from armbsd-nat.c.
122 * Makefile.in: Rename armbsd-nat.c to armnbsd-nat.c.
123 * config/arm/nbsd.mh: Likewise.
127 * NEWS: Note new target XStormy16.
128 * MAINTAINERS: Add -Werror to XStormy16.
133 * arm-tdep.c (arm_software_single_step): New function. Implements
134 software single-stepping for ARM targets.
135 (arm_get_next_pc, thumb_get_next_pc, bitcount, shifted_reg_val): Only
136 needed for software single-stepping.
137 * config/arm/tm-arm.h: Activate SOFTWARE_SINGLE_STEP_P.
142 * config/arm/nbsd.mh, config/arm/nbsd.mt, config/arm/tm-nbsd.h,
143 config/arm/nm-nbsd.h, config/arm/xm-nbsd.h: New files.
144 * armbsd-nat.c: New file.
145 * Makefile.in: Build it.
146 * configure.host, configure.tgt: Support NetBSD/arm.
150 * MAINTAINERS: Add myself as XStormy16 maintainer.
154 * config/rs6000/tm-rs6000.h (solib.h): Conditionally include.
158 * gdbarch.c: Re-generate.
162 * MAINTAINERS: Remove powerpcle-eabi and rs6000-ibm-aix3.2 from
167 * defs.h (LITTLE_ENDIAN): Delete definition.
168 * arch-utils.c, cris-tdep.c, d10v-tdep.c, defs.h, gdbarch.c,
169 gdbarch.sh, remote-rdp.c, remote-sim.c, sh-tdep.c, sparc-tdep.c,
170 config/alpha/tm-alpha.h, config/arm/tm-arm.h,
171 config/i386/tm-i386.h, config/i960/tm-i960.h,
172 config/ia64/tm-ia64.h, config/mcore/tm-mcore.h,
173 config/mips/tm-wince.h, config/mn10200/tm-mn10200.h,
174 config/ns32k/tm-umax.h, config/powerpc/tm-ppcle-eabi.h,
175 config/sh/tm-wince.h, config/v850/tm-v850.h, config/vax/tm-vax.h,
176 doc/gdbint.texinfo: Replace LITTLE_ENDIAN with BFD_ENDIAN_LITTLE.
180 * ui-out.c (struct ui_out_table): Add field entry_level.
181 (verify_field): New function.
182 (verify_field_proper_position): Delete function.
183 (verify_field_alignment): Delete function.
184 (ui_out_field_int): Update to use verify_field.
185 (ui_out_field_skip): Ditto.
186 (ui_out_field_string): Ditto.
187 (ui_out_field_fmt): Ditto.
188 (ui_out_table_begin): Initialize table.entry_level.
189 (ui_out_table_end): Clear table.entry_level.
190 (ui_out_begin): Call verify_field before pushing the new tuple or
191 list onto the stack. Use table.entry_level.
195 * config/djgpp/fnchange.lst: Add entries for opcodes/xstormy16-* files.
199 * arch-utils.c (generic_register_virtual_size): Return TYPE_LENGTH
204 * cli/cli-script.c (print_command_lines): Remove extra
205 "if", "else", "while", and "end" from show user output.
209 * i387-nat.c (i387_fill_fxsave): Change type of ``val'' from char
210 to short so that we don't memcpy() beyond the end of this buffer.
211 Also, change shift value used in computing val to account for the
212 fact that only eight bits are used.
216 * Makefile.in: Add support for xstormy16.
217 * configure.tgt: Ditto.
218 * xstormy16-tdep.c: New file.
219 * config/xstormy16/xstormy16.mt: New file.
223 * MAINTAINERS (write-after-approval): Add myself.
227 * Makefile.in (c-exp.tab.o): Add missing dependencies.
229 * Makefile.in (c_lang_h): New variable. Use it in dependency
230 lists, instead of `c-lang.h' itself.
234 * c-typeprint.c (c_type_print_base): Use type flags access macros
236 * ch-typeprint.c (chill_type_print_base): Ditto.
237 * ch-valprint.c (chill_val_print): Ditto.
238 * d10v-tdep.c (d10v_pointer_to_address): Ditto.
239 * dwarf2read.c (dwarf2_add_member_fn): Ditto.
240 * dwarfread.c (read_structure_scope): Ditto.
241 * gdbtypes.c (create_range_type): Dittol
242 (create_set_type): Ditto.
243 (check_typedef): Ditto.
244 * jv-typeprint.c (java_type_print_base): Ditto.
245 * p-typeprint.c (pascal_type_print_base): Ditto
246 * p-valprint.c (pascal_val_print): Ditto.
247 * stabsread.c (read_cfront_member_functions): Ditto.
248 (read_member_functions): Ditto.
249 (cleanup_undefined_types): Ditto.
250 * valprint.c (val_print): Ditto.
252 * valops.c (hand_function_call): Remove is_prototyped
253 variable and just use type flag test macro directly.
257 * gdbtypes.c (print_bound_type): New function.
258 (recursive_dump_type): Print type struct code values
259 TYPE_CODE_BITSTRING, TYPE_CODE_COMPLEX, TYPE_CODE_TEMPLATE,
260 and TYPE_CODE_TEMPLATE_ARG.
261 (recursive_dump_type): Print type struct members
262 upper_bound_type, lower_bound_type, cv_type, and as_type.
263 Also always print the tagname member, even when it is NULL.
267 * d10v-tdep.c (d10v_register_virtual_size): Delete.
268 (d10v_gdbarch_init): Use generic_register_virtual_size.
269 * rs6000-tdep.c (rs6000_register_virtual_size): Delete.
270 (rs6000_gdbarch_init): Use generic_register_virtual_size.
271 * x86-64-tdep.c (x86_64_register_virtual_size): Delete.
272 (i386_gdbarch_init): Use generic_register_virtual_size.
276 * values.c: Include "gdb_assert.h".
277 (value_fn_field): Rearange to avoid -Wuninitialized warning.
281 * values.c (value_fn_field): Add physname variable. Use a minimal
282 symbol if we don't find a full symbol. Remove setting of the new
283 value's type since that was already done by allocate_value().
284 Remove obsolete commented out error call since callees need to
285 handle a NULL return, which is possible result not an error.
286 * eval.c (evaluate_subexp_standard): Move check for inlined
287 functions to precede attempt to dereference a NULL argvec[0].
291 * arm-linux-tdep.c (skip_hurd_resolver): Use NULL rather than
292 zero in args to lookup_minimal_symbol.
293 * linespec.c (decode_line_1): Ditto.
294 * i386-linux-tdep.c (skip_hurd_resolver): Ditto.
295 * minsyms.c (find_stab_function_addr): Ditto.
296 * symfile.c (simple_read_overlay_table): Ditto.
297 (simple_read_overlay_region_table): Ditto.
301 * arch-utils.c (generic_register_virtual_size): New function.
302 * arch-utils.h: Export generic version of register_virtual_size.
303 * gdbarch.sh (REGISTER_VIRTUAL_SIZE): Use new function as default.
304 * gdbarch.c: Regenerate.
308 * gdbtypes.c (TYPE_FLAG_UNSIGNED, TYPE_FLAG_STUB): Use
309 TYPE_UNSIGNED and TYPE_NOSIGN to determine when to print these
310 rather than testing the bits directly.
311 (TYPE_FLAG_NOSIGN, TYPE_FLAG_TARGET_STUB, TYPE_FLAG_STATIC,
312 TYPE_FLAG_CONST, TYPE_FLAG_VOLATILE, TYPE_FLAG_PROTOTYPED,
313 TYPE_FLAG_INCOMPLETE, TYPE_FLAG_CODE_SPACE, TYPE_FLAG_DATA_SPACE,
314 TYPE_FLAG_VARARGS): Test for and print these bits as well.
318 * gdbtypes.c (build_gdbtypes): For builtin_type_char, pass
319 TYPE_FLAG_NOSIGN to init_type() rather than setting it after the
324 * gdbtypes.h (TYPE_UNSIGNED, TYPE_NOSIGN, TYPE_CONST,
325 TYPE_VOLATILE, TYPE_INCOMPLETE): Move macros that test the
326 bits to location in file where the bits are defined.
327 (TYPE_STUB, TYPE_TARGET_STUB, TYPE_STATIC, TYPE_PROTOTYPED,
328 TYPE_CODE_SPACE, TYPE_DATA_SPACE): New test macros.
332 * gdbtypes.c (allocate_stub_method): Replace hand crafted type
333 initialization with call to the init_type() function.
337 * arch-utils.c (generic_register_raw_size): New function.
338 * gdbarch.sh (REGISTER_RAW_SIZE): Use generic_register_raw_size as
340 * gdbarch.c: Regenerate.
341 * arch-utils.h (generic_register_raw_size): Declare.
343 * config/mips/tm-mips.h (REGISTER_RAW_SIZE): Delete macro.
344 * mips-tdep.c (mips_register_raw_size): Make function static.
345 (mips_gdbarch_init): Initialize register_raw_size.
349 * dwarf2read.c (read_typedef): Replace hand crafted type
350 initialization with a call to the init_type() function, which
351 is how the rest of gdb creates types.
355 * mdebugread.c (cross_ref): Pass TYPE_FLAG_STUB to init_type()
356 rather than setting it after the type is created.
360 * config/rs6000/tm-rs6000.h (STAB_REG_TO_REGNUM): Remove
361 definition, it is now multiarched.
362 * ppc-tdep.h (struct gdbarch_tdep): Move from rs6000-tdep.c. Add
363 fields for special register numbers.
364 * rs6000-tdep.c (rs6000_gdbarch_init): Initialize new tdep special
366 (rs6000_saved_pc_after_call): Use gdbarch_tdep registers fields
367 instead of hardcoded macros.
368 (branch_dest, rs6000_pop_frame, rs6000_fix_call_dummy,
369 ppc_push_return_address, rs6000_frame_saved_pc,
370 frame_get_saved_regs, rs6000_frame_chain,
371 rs6000_store_return_value): Ditto.
372 (rs6000_stab_reg_to_regnum): New function.
373 * ppcnbsd-nat.c (fetch_inferior_registers,
374 store_inferior_registers, fetch_core_registers): Ditto.
375 * ppc-linux-tdep.c (ppc_linux_in_sigtramp,
376 ppc_linux_frame_init_saved_regs): Ditto.
377 * ppc-linux-nat.c (ppc_register_u_addr, supply_gregset,
378 fill_gregset): Ditto.
379 * ppc-bdm.c (bdm_ppc_fetch_registers, bdm_ppc_store_registers):
384 * c-lang.c (c_create_fundamental_type): For FT_CHAR, pass
385 TYPE_FLAG_NOSIGN to init_type() rather than setting it after the
390 * dwarf2read.c (TYPE_FLAG_VARARGS): Remove from here.
391 * gdbtypes.h (TYPE_FLAG_VARARGS): Add here and change value to
392 not collide with other flag bits.
396 * dwarf2read.c (read_base_type): Rename is_unsigned to type_flags.
397 For unsigned types set TYPE_FLAG_UNSIGNED and pass it to
402 * Makefile.in (cp-valprint.o): Add dependency on $(cp_abi_h).
406 * config/s390/s390.mh: Don't use the linux-thread.o module;
407 thread-db.o, lin-lwp.o, and proc-service.o should work just fine.
411 * PROBLEMS: New file.
412 * README: Move known problems to PROBLEMS file.
416 * stabsread.c (read_member_functions): Skip member functions which
417 are duplicates of the callable constructor/destructor.
421 * s390-tdep.c (s390_store_return_value): Don't convert float
422 values to double format when returning them; just return them in
423 the first half of the FP register, as the ABI specifies.
427 * valops.c (hand_function_call): Check for method arguments in
428 TYPE_ARG_TYPES(), not in TYPE_FIELD ().
432 * cp-valprint.c (cp_print_value): Preserve offset if
433 the virtual base is outside of this object.
437 * gdbtypes.c (finish_cv_type): New function.
438 (check_typedef): Remove ``register'' keyword from argument.
439 Preserve const and volatile attributes across filling in
441 * gdbtypes.h (finish_cv_type): Add prototype.
443 * hp-symtab-read.c (hpread_read_struct_type): Call finish_cv_type.
444 * stabsread.c (read_struct_type): Likewise.
445 * dwarf2read.c (read_structure_scope): Likewise. Remove redundant
446 assignment to die->type.
450 * printcmd.c (print_scalar_formatted): Compare the length of the
451 value against the lengths of the target's floating-point types,
452 not the host's. Add support for `long double'.
456 * configure.in: Check for sys/filio.h
457 * configure: Rebuild.
458 * config.in: Add HAVE_SYS_FILIO_H
459 * ser-tcp.c: Conditionally include sys/filio.h.
463 * ui-out.c (ui_out_table_begin): Initialize body_flag.
464 (struct ui_out_table): New structure. Move table fields to here.
465 Rename headercurr to headernext.
466 (struct ui_out): Remove table specific fields. Add field table.
467 (ui_out_table_begin, ui_out_table_body, ui_out_table_end): Update.
468 (ui_out_table_header, ui_out_begin): Update.
469 (verify_field_proper_position, verify_field_alignment): Update.
470 (ui_out_new, clear_header_list, append_header_to_list): Update.
471 (get_next_header): Rename get_curr_header. Update comments and
476 * regcache.c (XCALLOC): Delete macro that should not have been
481 * dwarf2cfi.c: New file.
482 * dwarf2cfi.h: New file.
483 * dwarf2read.c (dwarf_frame_offset, dwarf_frame_size): New variables.
484 (dwarf_eh_frame_offset, dwarf_eh_frame_size): New variables.
485 (dwarf2_read_section): Change to non static.
486 (dwarf2_locate_sections): Add .debug_frame and .eh_frame section
488 (FRAME_SECTION, EH_FRAME_SECTION): New define.
489 * elfread.c (elf_symfile_read): Add call of frame informations build.
490 * frame.h (frame_info): Add pointer to unwind_context.
491 * symfile.h (dwarf2_build_frame_info): Add declaration.
492 * gdbarch.sh (DWARF2_BUILD_FRAME_INFO): Add.
493 * gdbarch.h, gdbarch.c: Regenerate.
494 * Makefile.in: Add dwarf2cfi_h, dwarf2cfi.o
495 * x86-64-tdep.c (i386_gdbarch_init): Initialize target vector to
496 use debug frame info.
500 * defs.h: Do not include "mmalloc.h".
501 (mcalloc, mmalloc, mrealloc, mfree): Delete declaration.
502 * objfiles.c: Include "mmalloc.h".
503 * utils.c: Include "mmalloc.h".
504 (mmalloc, mfree, mrealloc, mmalloc): Make static, change PTR to
509 * regcache.c (store_register, fetch_register): Only use
510 fetch/store pseudo-register when function is present. Assume
511 target can handle all registers.
512 (registers_changed): Simplify invalidate loop.
513 (registers_fetched): Add comments.
514 (register_buffer): Add regnum range assertion. Remove code
516 (build_regcache): Make space for pseudo-registers when computing
517 sizeof_registers. Initialize register_offset.
519 * gdbarch.sh (FETCH_PSEUDO_REGISTER): Change to a function with
521 (STORE_PSEUDO_REGISTER): Ditto.
522 * gdbarch.h, gdbarch.c: Re-generate.
526 * config/s390/nm-linux.h: Watchpoints are either continuable or
527 steppable, not both. The S/390 has continuable watchpoints, so
528 delete the #definition of HAVE_STEPPABLE_WATCHPOINT.
532 * go32-nat.c (go32_fetch_registers): Remove call to register_buffer
533 (which is now a static function in regcache.c)
534 and use regcache_collect instead.
538 * target.c (cleanup_target): Do not initialize to_query to
543 * s390-tdep.c (s390_get_frame_info): Recognize argument register
544 spills that use the `stm' instruction.
545 (is_arg_reg): New function.
549 * gdbserver/low-linux.c (arm_register_u_addr): Added.
550 (initialize_arch): Added for ARM target.
551 * config/arm/nm-linux.h (U_REGS_OFFSET): Defined.
552 (REGISTER_U_ADDR): Defined.
553 * config/arm/tm-linux.h (ARM_GNULINUX_TARGET): Defined.
557 * arm-tdep.c (arm_skip_prologue): Always skip prologue by scanning
558 the prologue if source is assembler.
562 * MAINTAINERS (write-after-approval): Add self.
564 * d10v-tdep.c (d10v_gdbarch_init): Change size of long long to 8 bytes.
567 * d10v-tdep.c (d10v_frame_chain_valid): Check if the caller's PC
568 is in the entry function.
569 (d10v_use_struct_convention): Store multi-field struct and union
570 return values on the stack.
574 * s390-tdep.c (s390_get_frame_info): Recognize spills of reg
575 arguments into their stack slots.
577 * s390-tdep.c (s390_get_frame_info): More doc fixes.
579 * s390-tdep.c (s390_get_frame_info): Doc fixes.
583 * cris-tdep.c (cris_regnums): Add DCCR_REGNUM for completeness.
584 (cris_examine): Add comment about solib prologue parsing.
585 (bdap_prefix): Read offset with correct signedness and size.
586 (move_to_preg_op): Don't rely on register numbering for register size.
587 (none_reg_mode_move_from_preg_op): Ditto.
591 * solib.c (solib_open): Make path relative if search for absolute path
592 failed. If search for relative path in solib_search_path failed, fall
593 back to search for basename only.
597 * serial.h: Add a note to serial_open.
599 * ser-tcp.c (tcp_open): Rewrite to use a non-blocking connect.
600 Allow UI and CLI to abort connect. Instead of trying 15 times
601 with very long timeouts, just try one connect with a maximum timeout
606 * config/powerpc/tm-macos.h (solib.h): Include.
607 * config/powerpc/tm-ppc-eabi.h (solib.h): Include.
611 * symtab.c (search_symbols): Make sure alloca size is big enough.
615 * MAINTAINERS: Prune m68k targets down to just m68k-elf.
619 * s390-tdep.c (s390_get_frame_info): Don't used fextra_info to set
620 orig_sp if it's not initialized.
624 * findvar.c (locate_var_value): Specify in which register a register
629 * win32-nat.c (mappings): Correct position of XMM registers,
630 based on FXSAVE instruction structure.
634 * jv-lang.c (get_java_class_symtab): Use xmmalloc instead of
637 * coffread.c, dbxread.c, elfread.c, hp-psymtab-read.c, hpread.c,
638 nlmread.c, objfiles.c, os9kread.c, somread.c, source.c, symfile.c,
639 symmisc.c, xcoffread.c: Use xmfree instead of mfree.
641 * jv-lang.c (add_class_symtab_symbol): Use xmrealloc instead of
646 * i386-tdep.c (i386go32_frame_saved_pc): New function.
647 * config/i386/tm-go32.h (i386go32_frame_saved_pc): Declare.
648 (FRAME_SAVED_PC): Redefine to i386go32_frame_saved_pc.
652 * defs.h: Update comment on HOST_BYTE_ORDER.
653 * config/xm-aix4.h: Delete definition of HOST_BYTE_ORDER.
654 * config/xm-nbsd.h, config/alpha/xm-alphalinux.h: Ditto.
655 * config/alpha/xm-alphaosf.h, config/alpha/xm-fbsd.h: Ditto.
656 * config/arm/xm-linux.h, config/i386/xm-cygwin.h: Ditto.
657 * config/i386/xm-i386bsd.h, config/i386/xm-i386gnu.h: Ditto.
658 * config/i386/xm-i386lynx.h, config/i386/xm-i386m3.h: Ditto.
659 * config/i386/xm-i386mach.h, config/i386/xm-i386v.h: Ditto.
660 * config/i386/xm-ptx.h, config/i386/xm-symmetry.h: Ditto.
661 * config/ia64/xm-aix.h, config/ia64/xm-linux.h: Ditto.
662 * config/m68k/xm-3b1.h, config/m68k/xm-apollo68b.h: Ditto.
663 * config/m68k/xm-apollo68v.h, config/m68k/xm-delta68.h: Ditto.
664 * config/m68k/xm-dpx2.h, config/m68k/xm-hp300bsd.h: Ditto.
665 * config/m68k/xm-hp300hpux.h, config/m68k/xm-m68k.h: Ditto.
666 * config/m68k/xm-m68klynx.h, config/m68k/xm-sun2.h: Ditto.
667 * config/m68k/xm-sun3.h, config/m88k/xm-dgux.h: Ditto.
668 * config/m88k/xm-m88k.h, config/mips/xm-irix3.h: Ditto.
669 * config/mips/xm-irix5.h, config/mips/xm-linux.h: Ditto.
670 * config/mips/xm-mips.h, config/mips/xm-mipsm3.h: Ditto.
671 * config/mips/xm-mipsv4.h, config/mips/xm-news-mips.h: Ditto.
672 * config/mips/xm-riscos.h, config/pa/xm-hppab.h: Ditto.
673 * config/pa/xm-hppah.h, config/powerpc/xm-linux.h: Ditto.
674 * config/romp/xm-rtbsd.h, config/rs6000/xm-rs6000.h: Ditto.
675 * config/rs6000/xm-rs6000ly.h, config/s390/xm-linux.h: Ditto.
676 * config/sparc/xm-sparc.h, config/sparc/xm-sparclynx.h: Ditto.
677 * config/vax/xm-vax.h: Ditto.
679 * config/a29k/tm-vx29k.h: Add #error as file depends on
681 * config/a29k/tm-a29k.h: Ditto.
682 * MAINTAINERS (a29k-amd-udi): Document as broken.
686 * Makefile.in (tm-news.h, tm-isi.h, xm-news1000.h): Delete.
687 (ALLDEPFILES): Delete news-xdep.c.
688 (news-xdep.o): Delete.
689 (isi-xdep.o): Delete.
690 * configure.tgt: Delete m68*-isi-*, m68*-sony-*, m68*-rom68k-*,
691 m68*-*bug-*, m68*-monitor-* and m68*-est-* targets.
692 * configure.host: Delete m68030-sony-*, m68*-isi-* and m68*-sony-*
694 * m68k-tdep.c (isi_skip_prologue): Delete function.
695 * news-xdep.c: Delete file.
696 * isi-xdep.c: Delete file.
697 * config/m68k/isi.mh: Delete file.
698 * config/m68k/isi.mt: Delete file.
699 * config/m68k/news.mh: Delete file.
700 * config/m68k/news.mt: Delete file.
701 * config/m68k/news1000.mh: Delete file.
702 * config/m68k/nm-news.h: Delete file.
703 * config/m68k/tm-isi.h: Delete file.
704 * config/m68k/tm-news.h: Delete file.
705 * config/m68k/xm-isi.h: Delete file.
706 * config/m68k/xm-news.h: Delete file.
707 * config/m68k/xm-news1000.h: Delete file.
709 * kdb-start.c: Delete file.
710 * stuff.c: Delete file.
712 * NEWS: Note that a29k-nyu-sym1 and a29k-*-kern* were deleted.
713 * configure.host: Delete a29k-*-* host.
714 * configure.tgt: Delete a29k-*-kern* and a29k-*-sym1* targets.
715 * config/a29k/a29k-kern.mt: Delete file.
716 * config/a29k/nm-ultra3.h: Delete file.
717 * config/a29k/tm-ultra3.h: Delete file.
718 * config/a29k/ultra3.mh: Delete file.
719 * config/a29k/ultra3.mt: Delete file.
720 * config/a29k/xm-ultra3.h: Delete file.
722 * NEWS: Note that i[3456]86-*-sunos* was deleted.
723 * Makefile.in (sun386-nat.o): Delete.
724 * configure.tgt: Delete i[3456]86-*-sunos* target.
725 * configure.host: Delete i[3456]86-*-sunos* host.
726 * sun386-nat.c: Delete.file.
727 * config/i386/nm-sun386.h: Delete file.
728 * config/i386/sun386.mh: Delete file.
729 * config/i386/sun386.mt: Delete file.
730 * config/i386/tm-sun386.h: Delete file.
731 * config/i386/xm-sun386.h: Delete file.
733 * NEWS: Note that ns32k-*-mach3*, ns32k-umax-*, ns32k-utek-sysv*
734 and ns32k-utek-* were deleted.
735 * Makefile.in (ultra3-nat.o, ultra3-xdep.o): Delete.
736 (umax-xdep.o, ns32km3-nat.o): Delete.
737 * configure.tgt: Delete ns32k-*-mach3*, ns32k-utek-sysv* and
738 ns32k-utek-* targets.
739 * configure.host: Delete ns32k-*-mach3*, ns32k-umax-* and
740 ns32k-utek-sysv* hosts.
741 * ultra3-nat.c: Delete file.
742 * ultra3-xdep.c: Delete file.
743 * umax-xdep.o: Delete file.
744 * ns32km3-nat: Delete file.
745 * config/ns32k/merlin.mh: Delete file.
746 * config/ns32k/merlin.mt: Delete file.
747 * config/ns32k/nm-umax.h: Delete file.
748 * config/ns32k/ns32km3.mh: Delete file.
749 * config/ns32k/ns32km3.mt: Delete file.
750 * config/ns32k/tm-merlin.h: Delete file.
751 * config/ns32k/tm-ns32km3.h: Delete file.
752 * config/ns32k/umax.mh: Delete file.
753 * config/ns32k/umax.mt: Delete file.
754 * config/ns32k/xm-merlin.h: Delete file.
755 * config/ns32k/xm-ns32km3.h: Delete file.
756 * config/ns32k/xm-umax.h: Delete file.
758 * NEWS: Note that m88*-harris-cxux* was deleted.
759 * configure.host: Delete m88*-harris-cxux* host.
760 * configure.tgt: Delete m88*-harris-cxux* target.
761 * config/m88k/cxux.mh: Delete file.
762 * config/m88k/cxux.mt: Delete file.
763 * config/m88k/nm-cxux.h: Delete file.
764 * config/m88k/tm-cxux.h: Delete file.
765 * config/m88k/xm-cxux.h: Delete file.
767 * NEWS: Note that powerpc-*-netware*, powerpcle-*-cygwin* and
768 powerpcle-*-solaris* were deleted.
769 * configure.host: Delete powerpcle-*-cygwin* and
770 powerpcle-*-solaris* hosts.
771 * configure.tgt: Delete powerpc-*-netware*, powerpcle-*-cygwin*
772 and powerpcle-*-solaris* targets.
773 * config/powerpc/cygwin.mh: Delete file.
774 * config/powerpc/cygwin.mt: Delete file.
775 * config/powerpc/nm-solaris.h: Delete.file.
776 * config/powerpc/ppc-nw.mt: Delete file.
777 * config/powerpc/solaris.mh: Delete file.
778 * config/powerpc/solaris.mt: Delete file.
779 * config/powerpc/tm-cygwin.h: Delete file.
780 * config/powerpc/tm-ppc-nw.h: Delete file.
781 * config/powerpc/tm-solaris.h: Delete file.
782 * config/powerpc/xm-cygwin.h: Delete file.
783 * config/powerpc/xm-mpw.h: Delete file.
784 * config/powerpc/xm-solaris.h: Delete file.
786 * NEWS, MAINTAINERS: Note that w65-*-* was deleted.
787 * configure.tgt: Delete w65-*-*.
788 * Makefile.in (w65-tdep.o): Delete.
789 * config/w65/tm-w65.h: Delete file.
790 * config/w65/w65.mt: Delete file.
791 * w65-tdep.c: Delete file.
793 * NEWS: Mention deleted tic80-*-*.
794 * configure.tgt: Delete tic80-*-*.
795 * Makefile.in (tic80-tdep.o): Delete.
796 * config/tic80/tic80.mt: Delete.
797 * config/tic80/tm-tic80.h: Delete.
798 * tic80-tdep.c: Delete.
799 * MAINTAINERS: Note that tic80 was deleted.
803 * ppc-linux-tdep.c (solib-svr4.h): Include.
804 (ppc_linux_svr4_fetch_link_map_offsets): New function.
805 * ppc-tdep.h (ppc_linux_svr4_fetch_link_map_offsets): Declare.
806 * rs6000-tdep.c (solib-svr4.h): Include.
807 (rs6000_gdbarch_init): Set up ppc_linux_svr4_fetch_link_map_offsets()
808 as the link map offsets fetcher.
810 * config/powerpc/aix.mt (TDEPFILES): Add solib-svr4.o.
811 * config/powerpc/macos.mt (TDEPFILES): Likewise.
812 * config/powerpc/nbsd.mt (TDEPFILES): Likewise.
813 * config/powerpc/ppc-eabi.mt (TDEPFILES): Likewise.
814 * config/powerpc/ppc-sim.mt (TDEPFILES): Likewise.
815 * config/powerpc/ppcle-eabi.mt (TDEPFILES): Likewise.
816 * config/powerpc/ppcle-sim.mt (TDEPFILES): Likewise.
817 * config/powerpc/vxworks.mt (TDEPFILES): Likewise.
818 * config/rs6000/aix4.mt (TDEPFILES): Likewise.
819 * config/rs6000/rs6000.mt (TDEPFILES): Likewise.
820 * config/rs6000/rs6000lynx.mt (TDEPFILES): Likewise.
825 * arm-tdep.c (solib-svr4.h): Include.
826 (arm_linux_svr4_fetch_link_map_offsets): New function.
827 * config/arm/tm-linux.h (SVR4_FETCH_LINK_MAP_OFFSETS): Define.
828 (arm_linux_svr4_fetch_link_map_offsets): Declare.
832 * values.c (value_primitive_field): Add embedded_offset to the
833 address of structure members.
834 * gnu-v3-abi.c (gnuv3_rtti_type): Cast to base type before
835 attempting to access vtable pointer. Set using_enc_p if we cast.
836 (gnuv3_virtual_fn_field): Call value_cast with structure rather than
837 structure pointer. Cast to base type before attempting to access
842 * Makefile.in (ppc-linux-nat.o): Add dependency on ppc-tdep.h.
844 * ppc-tdep.h (PPC_GPLAST_REGNUM): Define.
846 * ppc-linux-nat.c: Include ppc-tdep.h.
847 (ppc_register_u_addr): Don't use the static array regmap[],
848 dynamically define the mapping instead.
849 (supply_gregset): Ditto.
850 (fill_gregset): Ditto.
851 (COPY_REG): Delete macro defintion.
852 (regmap): Delete array.
856 Tighten up GDB's support for returning structs by value.
857 * s390-tdep.c (s390_use_struct_convention): New function.
858 (s390_gdbarch_init): Register it as the S/390's
859 USE_STRUCT_CONVENTION method. Register
860 generic_cannot_extract_struct_value_address as our
861 EXTRACT_STRUCT_VALUE_ADDRESS method.
862 * arch-utils.c (generic_cannot_extract_struct_value_address): New
864 * arch-utils.h: Add corresponding prototype.
866 * values.c (value_being_returned): Make error message a proper
871 * dwarf2read.c (read_attribute_value): New function to handle
873 (read_attribute): uses read_attribute_value
877 * s390-tdep.c (s390_frame_saved_pc_nofix): If the prologue didn't
878 save the return address register, assume that the return address
883 * MAINTAINERS: Clarify obvious fix a little (as suggested by Eli
888 * mn10300-tdep.c (mn10300_analyze_prologue): Doc fixes.
892 * s390-tdep.c: Get frame chains and saved pc values properly from
894 (s390_frame_saved_pc_nofix): if `*fi' is a dummy frame, get the
895 saved PC from the dummy frame's registers.
896 (s390_frame_chain): Same for the saved SP.
897 (s390_gdbarch_init): Register `generic_save_dummy_frame_tos' as
898 the `SAVE_DUMMY_FRAME_TOS' method, so the dummy frame's `top' gets
901 * s390-tdep.c (s390_frame_chain): Remember that the SP's element
902 of the frame's saved_regs array is special.
904 * s390-tdep.c (register_names): Call the general-purpose registers
905 `r0' -- `r15', and the floating-point registers `f0' -- `f15', to
906 match the assembly language.
910 * config/i386/tm-cygwin.h: Define HAVE_SSE_REGS if
911 HAVE_CONTEXT_EXTENDED_REGISTERS is defined.
912 * win32-nat.c: Define CONTEXT_DEBUGGER_DR that will also include
913 extended registers if HAVE_SSE_REGS is defined.
914 (mappings array): Add offset of extended registers.
915 (thread_rec): Use new CONTEXT_DEBUGGER_DR macro.
920 * event-loop.c (start_event_loop): Call
921 after_char_processing_hook.
922 * event-top.h (after_char_processing_hook): Declare.
923 * event-top.c (rl_callback_read_char_wrapper): Call
924 after_char_processing_hook.
925 (after_char_processing_hook): New global.
926 * top.c (operate_saved_history): New global.
927 (gdb_rl_operate_and_get_next): New function.
928 (init_main): Add the operate-and-get-next defun.
929 (gdb_rl_operate_and_get_next_completion): New function.
933 * NEWS: Update for --args.
934 * infcmd.c (construct_inferior_arguments): Moved from ...
935 * fork-child.c: ... here.
939 * symtab.c (find_pc_sect_line): Revert change of 2001-11-13; add
940 comment explaining that hand-written assembly code can have line
941 number info but no debug info for an enclosing function.
945 * sparc-nat.c (fetch_inferior_registers): Don't rely
946 on CORE_ADDR being 32-bit.
947 (store_inferior_registers): Likewise.
951 * config/djgpp/config.sed: Fix an error in etc/ at "make install"
952 time on non-LFN systems where standards*.inf* expands to nothing.
954 * go32-nat.c (save_npx): Avoid a warning from GCC 3.x.
959 * win32-nat.c (struct so_stuff): Add objfile *objfile field needed to
960 be able to remove the DLL when unloaded. Remove unused last field.
961 (handle_unload_dll): New function to handle unloading of DLL.
962 (solib_symbols_add): Change return type to struct objfile *.
963 (get_child_debug_event): Call handle_unload_dll function.
967 * win32-nat.c (_initialize_check_for_gdb_ini): New function.
968 * config/i386/xm-cygwin.h: Remove obsolete handling of __CYGWIN32__.
969 (GDBINIT_FILENAME): Remove.
973 Add x86 OpenBSD native configuration.
974 * config/i386/obsd.mt, config/i386/tm-obsd.h, config/i386/obsd.mh,
975 config/i386/nm-obsd.h: New files.
976 * configure.host (i[3456]86-*-openbsd*): New host.
977 * configure.tgt (i[3456]86-*-openbsd*): New target.
982 * GDB 5.1 was released.
986 Fix for PR gdb/209, PR gdb/156:
987 * gdbarch.c, gdbarch.h: Rebuilt.
988 * gdbarch.sh: Added `construct_inferior_arguments'.
989 * cli/cli-decode.h (cmd_list_element): Added pre_show_hook.
991 * cli/cli-setshow.c (do_setshow_command): Call the pre_show_hook.
992 * infcmd.c (_initialize_infcmd): Set sfunc on `set args' command.
993 (inferior_argc, inferior_argv): New globals.
994 (notice_args_set): New function.
995 (set_inferior_args): Clear inferior_argc and inferior_argv.
996 (set_inferior_args_vector): New function.
997 (get_inferior_args): Handle inferior argument vector.
998 (run_command): Use get_inferior_args().
999 (notice_args_read): New function.
1000 (_initialize_infcmd): Don't call set_inferior_args.
1001 * command.h: Typo fix.
1002 (cmd_list_element): Added pre_show_hook.
1003 * main.c (captured_main): Added --args option.
1004 (print_gdb_help): Document --args.
1005 * inferior.h (construct_inferior_arguments): Declare.
1006 (set_inferior_args_vector): Likewise.
1007 * fork-child.c (construct_inferior_arguments): New function.
1011 * lin-lwp.c (lin_lwp_attach_lwp): Make sure SIGCHLD is in set of
1014 * lin-lwp.c (lin_lwp_attach_lwp): Mark main thread as stopped.
1018 * target.h (TARGET_RANGE_PROFITABLE_FOR_HW_WATCHPOINT): Delete
1019 default definition; this is never used.
1023 * varobj.c (c_value_of_child): Release memory for "name" when
1025 (c_type_of_child): Likewise.
1026 (cplus_value_of_child): Isolate the use of name_of_child to
1027 one case that needs it.
1028 Release memory for "name" when finished using it.
1032 * top.c (gdb_init): Call init_ui_hook before initializing
1037 * config/powerpc/nm-linux.h (ppc_register_u_addr): Add extern
1042 * ppc-linux-nat.c (COPY_REG): Use regcache_collect instead of
1043 accessing registers[].
1044 (fill_fpregset): Ditto.
1048 * infptrace.c (fetch_register): Dynamically allocate buffer for
1050 (store_register): Use regcache_collect, instead of accessing the
1051 register buffer directly.
1055 * mips-tdep.c (find_proc_desc): Add cur_frame argument. Pass
1056 cur_frame to heuristic_proc_desc.
1057 (heuristic_proc_desc): Add cur_frame argument. Do not read SP
1059 (after_prologue): Pass cur_frame == 0 to find_proc_desc.
1060 (mips_frame_chain): Pass cur_frame == 1 to find_proc_desc.
1061 (mips_init_extra_frame_info): Likewise.
1065 * defs.h (return_to_top_level): Comment.
1069 * remote.c (remote_open_1, remote_async_open_1): Use ISO C string
1070 concatenation for error parameter.
1071 (remote_cisco_open): Ditto.
1075 * varobj.c (c_value_of_child): Use the wrapper function,
1076 gdb_value_struct_elt.
1077 (cplus_value_of_child): Likewise.
1081 * i386-tdep.c (i386_gdbarch_init): Initialize num_regs.
1082 * config/i386/tm-i386.h (NUM_REGS): Delete.
1086 * i386-linux-nat.c (fill_gregset): Fix botched regcache_collect()
1087 conversion for I386_LINUX_ORIG_EAX_REGNUM.
1091 * config/i386/embed.mt (TM_FILE): Set to tm-i386.h.
1092 * config/i386/tm-embed.h: Delete.
1096 * Makefile.in (distclean): Explicitly delete Makefile et.al. in
1097 gdbserver sub directory.
1101 * README: Mention need for alloca(). Mention problems with
1102 alpha-dec-osf4.0e. Clarify that comments refer to GDB 5.1.
1106 * i386-linux-nat.c (fill_gregset): Use regcache_collect() instead
1107 of accessing registers[] directly.
1111 * i386-linux-nat.c (fill_gregset): Don't invoke read_register_gen()
1112 when fetching ORIG_EAX.
1116 * arm-linux-nat.c: Don't include <asm/ptrace.h>.
1117 (fetch_register): Use elf_gregset_t instead of struct pt_regs.
1118 (fetch_regs): Likewise.
1119 (store_register): Likewise.
1120 (store_regs): Likewise.
1124 * sparc-linux-nat.c (fill_gregset): Replace read_register_gen
1125 with regcache_collect.
1126 (fill_fpregset): Likewise.
1130 * Makefile.in: Add mips-linux-nat.c, mips-linux-tdep.c,
1131 and sparc-linux-nat.c to ALLDEPFILES. Add dependencies.
1132 * config/sparc/linux.mh: Add sparc-linux-nat.o to NATDEPFILES.
1133 * sparc-linux-nat.c: New file, from Mark Kettenis.
1137 * dwarf2read.c (dwarf_str_buffer): New.
1138 (struct dwarf2_pinfo): Add dwarf_str_buffer and dwarf_str_size.
1139 (DWARF_STR_BUFFER, DWARF_STR_SIZE): Define.
1140 (dwarf2_has_info): Clear dwarf_str_offset.
1141 (dwarf2_build_psymtabs): Read .debug_str section if present.
1142 (dwarf2_build_psymtabs_hard): Save DWARF_STR_BUFFER and
1144 (psymtab_to_symtab_1): Restore DWARF_STR_BUFFER and DWARF_STR_SIZE.
1145 (read_attribute): Handle DW_FORM_strp.
1146 (read_n_bytes, read_string): Remove HOST_CHAR_BIT != 8
1148 (read_indirect_string): New.
1149 (dump_die): Handle DW_FORM_strp.
1153 * s390-tdep.c: Tweak argument-passing to match GCC bugs.
1154 (is_float_singleton, is_struct_like, is_float_like): New
1155 functions, that isolate the weirdness.
1156 (is_double_or_float, is_simple_arg, pass_by_copy_ref,
1157 is_double_arg): Use is_struct_like and is_float_like, rather than
1158 testing the type codes ourselves.
1159 (s390_push_arguments): When passing args on the stack, align each
1160 on to a four-byte boundary, regardless of what the type itself
1165 * Makefile.in (os9kread.o): Replace $< with autoconf-approved
1168 (z8k-tdep.o): Ditto.
1172 * MAINTAINERS (write-after-approval): Add self.
1176 * s390-tdep.c (is_simple_arg): Structs and unions exactly eight
1177 bytes long should be handled as DOUBLE_ARGs; don't recognize them
1182 * remote.c (struct packet_reg): Declare.
1183 (struct remote_state): Add fields sizeof_g_packet and g_packet.
1184 (init_remote_state): Initialize sizeof_g_packet and g_packet.
1185 (free_remote_state): Free g_packet.
1186 (packet_reg_from_pnum, packet_reg_by_regnum): New functions.
1187 (remote_wait): Use above instead of gdbarch methods
1188 REGISTER_RAW_SIZE and REGISTER_BYTES.
1189 (remote_async_wait): Ditto.
1190 (remote_fetch_registers, remote_store_registers): Ditto.
1191 (store_register_using_P): Ditto.
1195 * remote.c (_initialize_remote): Don't multi-arch swap tty_input.
1200 * utils.c (phex_nz): For default case, set str to phex_nz return
1206 * TODO (register_buffer): Delete.
1207 * regcache.c (register_buffer): Make static.
1208 (regcache_collect): New function.
1209 * regcache.h (register_buffer): Delete declaration.
1210 (regcache_collect): Declare.
1211 * remote.c (store_register_using_P): Rewrite using
1213 (remote_store_registers): Ditto.
1214 * go32-nat.c (store_register): Ditto.
1218 * remote.c (struct remote_state): Declare.
1219 (get_remote_state): New function.
1220 (init_remote_state): New function.
1221 (remote_gdbarch_data_handle): New global.
1222 (build_remote_packet_sizes): Delete function, moved to
1224 (register_remote_packet_sizes): Delete function.
1225 (actual_register_packet_size, remote_packet_size): Moved to
1226 ``struct remote_state''.
1227 (PBUFSIZE): Delete. Replaced by rs->remote_packet_size.
1228 (free_remote_state): New function.
1229 (get_memory_packet_size, get_memory_read_packet_size)
1230 (set_thread, remote_unpack_thread_info_response)
1231 (remote_get_threadinfo, parse_threadlist_response)
1232 (remote_get_threadlist, remote_current_thread)
1233 (remote_threads_info, remote_threads_extra_info)
1234 (extended_remote_restart, get_offsets)
1235 (get_offsets, remote_check_symbols, remote_open_1)
1236 (remote_async_open_1, remote_detach, remote_async_detach)
1237 (remote_resume, remote_async_resume, remote_wait)
1238 (remote_async_wait, remote_fetch_registers)
1239 (store_register_using_P, remote_store_registers)
1240 (check_binary_download, putpkt_binary)
1241 (remote_insert_breakpoint, remote_remove_breakpoint)
1242 (remote_insert_watchpoint, remote_remove_watchpoint)
1243 (remote_insert_hw_breakpoint, remote_remove_hw_breakpoint)
1244 (compare_sections_command, remote_query)
1245 (remote_rcmd, remote_rcmd, packet_command)
1246 (remote_info_process): Update.
1250 * remote.c: Include "gdb_assert.h".
1251 (tty_input): Wire buffer to 400 bytes.
1252 (readsocket): Check tty_input doesn't overflow.
1253 (build_remote_gdbarch_data, _initialize_remote): Don't multi-arch
1258 * d10v-tdep.c (d10v_pointer_to_address): Use new type flag
1259 TYPE_FLAG_CODE_SPACE to recognize a pointer that has been cast
1260 into the instruction address space.
1261 * Makefile.in (doublest.o): Add dependency on gdbtypes.h.
1264 Add address space identifiers to expression language for types.
1265 * c-exp.y (space_identifier, cv_with_space_id,
1266 const_or_volatile_or_space_identifier_noopt,
1267 const_or_volatile_or_space_identifier): New terminals.
1268 (ptype): Accept const_or_volatile_or_space_identifier.
1269 (typebase): Accept const_or_volatile_or_space_identifier.
1270 * c-typeprint.c (c_type_print_cv_qualifier): Rename to
1271 c_type_print_modifier. Handle address space modified types.
1272 * gdbtypes.h (TYPE_FLAG_CODE_SPACE, TYPE_FLAG_DATA_SPACE):
1274 (struct type): Add new field as_type for addr-space qualified types.
1275 (TYPE_AS_TYPE): New macro, retrieves the chain of types that are
1276 identical to this one except for address-space qualification.
1277 * gdbtypes.c (alloc_type): Initialize new field 'as_type'.
1278 (address_space_name_to_int): New function.
1279 (address_space_int_to_name): New function.
1280 (make_type_with_address_space): New function.
1281 (make_cv_type): Handle as_type field of new struct type object.
1282 * parse.c (check_type_stack_depth): New function.
1283 (push_type_address_space): New function.
1284 (follow_types): Handle types with address-space qualifier.
1285 * parser-defs.h (enum type_pieces): Add enum tp_space_identifier.
1289 * s390-tdep.c (s390_pop_frame_regular): On the S/390, the frame
1290 pointer and the SP are often the same, so we can't pop the frame
1291 by setting the SP to the FP; we need to get the old SP from
1294 * s390-tdep.c (s390_extract_return_value): Returned `float' values
1295 can simply be copied bitwise from the registers into the value
1298 * s390-tdep.c (s390_get_frame_info): Initialize SP's element of
1299 the frame's saved_regs array correctly.
1301 * symfile.c (simple_read_overlay_table): Make sure we can find
1302 both `_novlys' and `_ovly_table' before we try anything else;
1303 print a helpful error message.
1304 (simple_overlay_update): No need to print error message here.
1308 * Makefile.in (doublest.o): Add dependency on gdbtypes.h.
1312 * arm-tdep.c (arm_register_type): New function.
1313 (arm_register_convertible): Delete.
1314 (arm_register_convert_to_virtual): Delete.
1315 (arm_register_convert_to_raw): Delete.
1316 * config/arm/tm-arm.h (REGISTER_CONVERTIBLE): Delete.
1317 (REGISTER_CONVERT_TO_VIRTUAL): Delete.
1318 (REGISTER_CONVERT_TO_RAW): Delete.
1319 (REGISTER_VIRTUAL_TYPE): Redefine as call to arm_register_type.
1320 (arm_register_type): Declare.
1325 * gdbtypes.h (builtin_type_int128, builtin_type_uint128): Declare.
1326 * gdbtypes.c (_initialize_gdbtypes, build_gdbtypes): Initialize
1331 * s390-tdep.c: Rewrite inferior function call code. This may
1332 break zSeries support; that should be fixed soon.
1333 #include "gdb_assert.h".
1334 (is_integer_like, is_pointer_like, is_simple_arg,
1335 pass_by_copy_ref, extend_simple_arg, is_double_arg, round_up,
1336 round_down, alignment_of): New functions.
1337 (s390_push_arguments): Rewritten to handle passing large arguments
1338 by value, and to make more readable.
1340 * s390-tdep.c (s390_pop_frame): Call generic_pop_current_frame, to
1341 interact correctly with generic dummy frames.
1342 (s390_pop_frame_regular): Move the guts of the frame-popping code
1343 to here, to be called by generic_pop_current_frame. Use the
1344 frame's saved_regs array; this works for `return' as well as
1345 inferior function calls.
1347 * s390-tdep.c (s390_gdbarch_init): Register the function
1348 `standard_coerce_float_to_double', since GCC for the S/390 follows
1349 the standard rules for passing floats.
1351 * valops.c (default_coerce_float_to_double,
1352 standard_coerce_float_to_double): Doc fixes.
1354 Patch from Peter Schauer:
1356 * symtab.c (find_pc_sect_line): If we can't find the function
1357 containing PC, we certainly won't have line number information for
1358 that location, so return zero immediately.
1362 * config/i960/tm-nindy960.h (REGISTER_CONVERTIBLE)
1363 (REGISTER_CONVERT_TO_RAW, REGISTER_CONVERT_TO_VIRTUAL): Delete
1365 * i960-tdep.c (i960_register_type): New function.
1366 * config/i960/tm-i960.h (REGISTER_CONVERTIBLE): Delete.
1367 (REGISTER_CONVERT_TO_VIRTUAL): Delete.
1368 (REGISTER_CONVERT_TO_RAW): Delete.
1369 (REGISTER_VIRTUAL_TYPE): Update. Call i960_register_type.
1373 * m88k-tdep.c (m88k_register_type): New function.
1374 * config/m88k/tm-m88k.h (REGISTER_CONVERTIBLE): Delete.
1375 (REGISTER_CONVERT_TO_VIRTUAL): Delete.
1376 (REGISTER_CONVERT_TO_RAW): Delete.
1377 (m88k_register_type): Declare.
1378 (REGISTER_VIRTUAL_TYPE): Update. Call m88k_register_type.
1382 * i386-tdep.h (FPU_REG_RAW_SIZE): Define unconditionally.
1383 * i387-nat.c, i387-tdep.c: Unconditionally include "i386-tdep.h".
1384 * config/i386/tm-i386.h (FPU_REG_RAW_SIZE): Removed.
1385 (SIZEOF_FPU_REGS): Don't use FPU_REG_RAW_SIZE here.
1390 * eval.c (evaluate_subexp_standard): Fix memory leak: use alloca
1395 * corefile.c (write_memory_unsigned_integer,
1396 write_memory_signed_integer): New functions.
1397 (write_memory): Move to be with other write_memory_* functions.
1398 * gdbcore.h (write_memory_unsigned_integer,
1399 write_memory_signed_integer): New declarations.
1403 * dwarf2read.c (dwarf_decode_lines): Properly deal with
1404 unknown standard opcodes.
1408 * README (alpha-dec-osf5.1): Mention -DUSE_LDR_ROUTINES.
1409 (sparcv9-sun-solars2.8): Mention problem with 64 bit GCC 3.0.x.
1410 (i586-sco-sysv5uw7.1.1): Mention problem with threads.
1415 * breakpoint.c (breakpoint_re_set_one): Don't discard SHLIB
1416 breakpoints when they fail.
1420 * printcmd.c, valprint.c, language.c, linespec.c, infcmd.c,
1421 gnu-nat.c, findvar.c, expprint.c, typeprint.c, stack.c, top.c:
1422 Replace value_ptr with struct value.
1426 * c-valprint.c, ch-lang.c, ch-valprint.c, cp-valprint.c,
1427 p-valprint.c, scm-exp.c, scm-lang.c, scm-valprint.c: Replace
1428 value_ptr with struct value.
1432 * eval.c: Replace most occurances of value_ptr with struct value.
1436 * s390-tdep.c: Don't use a call dummy.
1437 (s390_fix_call_dummy, s390_pc_in_call_dummy): Delete.
1438 (s390_push_return_address): Put the address of the inferior call
1440 (s390_gdbarch_init):
1441 - Provide trivial definition of s390_call_dummy_words; register it
1442 with the gdbarch appropriately.
1443 - Delete S390x_call_dummy_words.
1444 - Gather inferior-call-related settings into a group.
1445 - Use generic dummy frames.
1446 - Put the inferior call breakpoint at the entry point.
1447 - Use generic gdbarch methods: pc_in_call_dummy_at_entry_point,
1448 generic_push_dummy_frame, generic_fix_call_dummy.
1449 - There is a call dummy breakpoint offset; it's zero.
1451 * s390-tdep.c: (s390_push_arguments): Write a back chain pointer
1452 into the dummy frame, to help us get backtraces.
1454 * values.c (value_as_address): If VAL is a function or method,
1455 just return its address; don't let COERCE_ARRAY convert its
1456 address to a pointer, and then have unpack_long convert it back to
1461 * p-lang.c (is_pascal_string_type): New function to determine if a
1462 type is a string type.
1463 * p-lang.h: Add prototype for is_pascal_string_type.
1464 * p-valprint.c (pascal_val_print) : Use is_pascal_string_type function
1465 to display strings nicely.
1469 * p-exp.y (yylex): Only change case of expression if symbol is found.
1470 Also check for GPC standard name form.
1474 * gdb_indent.sh: New file.
1478 * s390-tdep.c (s390_get_frame_info): Initialize got_load_addr and
1479 got_load_len, to placate compiler.
1483 * i386-tdep.c (i386_gdbarch_init): Fix typo.
1487 * s390-tdep.c (s390_gdbarch_init): Use func_frame_chain_valid, not
1488 file_frame_chain_valid.
1490 * s390-tdep.c (s390_get_frame_info): If the prologue loads r12
1491 from the constant pool, but doesn't add in the constant pool's
1492 address to it, then this function probably isn't using r12 as a
1493 GOT pointer, and that load probably wasn't part of the prologue.
1495 * s390-tdep.c (s390_gdbarch_init): Use the default
1496 prepare_to_proceed function established by config/nm-linux.h;
1497 don't try to set it to linuxthreads_prepare_to_proceed.
1501 * i386-tdep.c: Include "i386-tdep.h".
1503 (i386_gdbarch_init): New function.
1504 (_initialize_i386_tdep): Register bfd_arch_i386.
1505 * config/i386/tm-i386.h (GDB_MULTI_ARCH): Define as
1506 GDB_MULTI_ARCH_PARTIAL.
1507 * i386-tdep.h: When partially multi-arch, conditionally define
1512 * i386-tdep.c (set_disassembly_flavor): Delete function.
1513 (set_disassembly_flavor_sfunc): Delete function.
1517 * dbxread.c (set_namestring): New function, replacing the
1518 SET_NAMESTRING macro.
1519 (SET_NAMESTRING, CUR_SYMBOL_TYPE, CUR_SYMBOL_VALUE,
1520 CUR_SYMBOL_STRX, DBXREAD_ONLY, START_PSYMTAB, END_PSYMTAB): Delete
1522 (read_dbx_symtab): Don't include partial-stab.h any more. Don't
1523 reuse code in partial-stab.h, include the code directly, instead.
1525 * Makefile.in (dbxread.o): Remove dependency on partial-stab.h.
1526 (HFILES_NO_SRCDIR): Remove partial-stab.h.
1528 * partial-stab.h: Remove file.
1532 * gdbarch.sh: For multi-arch functions, check there is a
1533 predefault and use it as the static default.
1534 * gdbarch.c: Re-generate.
1538 * config/i386/tm-linux.h (I386_LINUX_ORIG_EAX_REGNUM): Define in
1539 terms of NUM_GREGS, NUM_FREGS and NUM_SSE_REGS instead of
1540 hardcoding the register number.
1544 * gdbarch.sh (USE_STRUCT_CONVENTION): Default to
1545 generic_use_struct_convention.
1546 * gdbarch.h, gdbarch.c: Regenerate.
1547 * values.c (USE_STRUCT_CONVENTION): Delete definition, moved to
1552 * gdbarch.sh (PC_IN_CALL_DUMMY): Require a value.
1553 * gdbarch.c: Regenerate.
1557 * complaints.c (info_verbose): Remove unneeded decl, is in defs.h.
1559 * dwarf2read.c: Ditto.
1560 * dwarfread.c: Ditto.
1564 * mdebugread.c: Ditto.
1565 * os9kread.c: Ditto.
1568 * tracepoint.c: Ditto.
1572 * MAINTAINERS: Update Andrew Cagney's responsibilities. Mention
1573 David Taylor and Nick Duffek in past maintainers.
1577 * mdebugread.c (CUR_SYMBOL_TYPE, CUR_SYMBOL_VALUE, START_PSYMTAB,
1578 END_PSYMTAB, SET_NAMESTRING, HANDLE_RBRAC): Delete definitions.
1579 (parse_partial_symbols): Don't include partial-stab.h any
1580 more. Don't reuse code in partial-stab.h, include the code
1581 directly, instead. Simplify code from partial-stab.h eliminating
1582 ifdef DBXREAD_ONLY code.
1584 * Makefile.in (mdebugread.o): Remove dependency on partial-stab.h.
1588 * s390-nat.c: #include "regcache.h", to get declaration for
1589 `supply_register'. (The last change already added the dependency
1590 of s390-nat.o on regcache.h. Oops.)
1592 * Makefile.in (ALLDEPFILES): Add s390-tdep.c and s390-nat.c.
1593 (s390-tdep.o, s390-nat.o): New rules.
1595 * s390-nat.c (s390_register_u_addr): Pass proper arguments to
1600 * gdbarch.sh (CALL_DUMMY_LOCATION): Require a value.
1601 * gdbarch.c: Regenerate.
1605 * blockframe.c (get_prev_frame): Replace #ifdef
1606 INIT_EXTRA_FRAME_INFO with run-time test.
1610 * gdbarch.sh (push_return_address): Change to a function with
1612 * gdbarch.h, gdbarch.c: Re-generate.
1613 * valops.c (hand_function_call): Replace #ifdef
1614 PUSH_RETURN_ADDRESS with run-time test of PUSH_RETURN_ADDRESS_P.
1618 * arch-utils.c (generic_in_function_epilogue_p): New function.
1619 * arch-utils.h (generic_in_function_epilogue_p): Declare extern.
1620 * breakpoint.c (watchpoint_check): Add test whether the pc is
1621 currently in the epilogue of a function.
1622 * gdbarch.c: Autogenerated from gdbarch.sh.
1624 * gdbarch.sh (function_list): Add `in_function_epilogue_p' definition.
1628 * config/s390/s390.mh (NATDEPFILES): Don't split this across
1629 several lines with backslashes; the `sed' command in
1630 configure.in's AC_OUTPUT clause that comments out the NATDEPFILES
1631 assignment doesn't handle lines extended with backslashes.
1633 * configure.in (AC_OUTPUT): Handle assignments to NATDEPFILES
1634 using `+=' as well as `='.
1635 * configure: Regenerated.
1639 * gdbarch.sh (init_extra_frame_info): Change to a function with
1641 * gdbarch.h, gdbarch.c: Re-generate.
1642 * blockframe.c (create_new_frame): Replace #ifdef
1643 INIT_EXTRA_FRAME_INFO with run-time test of
1644 INIT_EXTRA_FRAME_INFO_P.
1648 * gdbarch.sh (verify_gdbarch): Use a mem_file to accumulate all
1649 error messages. Print in a single batch.
1650 * gdbarch.c: Re-generate.
1654 * i386-linux-nat.c (GETREGS_SUPPLIES, supply_gregset,
1655 fill_gregset): Add support for "orig_eax" register.
1657 Add support for "orig_eax" pseudo register on Linux/x86.
1658 * i386-linux-tdep.c: Include "inferior.h".
1659 (i386_linux_register_name, i386_linux_register_byte,
1660 i386_linux_register_raw_size): New functions.
1661 (i386_linux_write_pc): New function.
1662 * config/i386/tm-linux.h (I386_LINUX_ORIG_EAX_REGNUM): New define.
1663 (NUM_REGS, MAX_NUM_REGS, REGISTER_BYTES, REGISTER_NAME,
1664 REGISTER_BYTE, REGISTER_RAW_SIZE): Define to deal with additional
1666 (i386_linux_register_name, i386_linux_register_byte,
1667 i386_linux_register_raw_size): New prototypes.
1668 (TARGET_WRITE_PC): New define.
1669 (i386_linux_write_pc): New prototype.
1671 * i386-tdep.c (i386_register_offset): Renamed from
1672 i386_register_byte. Made static.
1673 (i386_register_size): Renamed from i386_register_raw_size. Made
1675 (i386_register_virtual_size): Removed.
1676 (i386_register_byte, i386_register_raw_size,
1677 i386_register_virtual_size): New functions.
1678 (_initialize_i386_tdep): Initialize i386_register_offset instead
1679 of i386_register_byte. Remove code to initialize
1680 i386_register_virtual_size.
1681 * config/i386/tm-i386.h (REGISTER_BYTE): Redefine to use
1682 i386_register_byte function.
1683 (REGISTER_RAW_SIZE): Redefine to use i386_register_raw_size
1685 (REGISTER_VIRTUAL_SIZE): Redefine to use
1686 i386_register_virtual_size function.
1687 (i386_register_byte, i386_register_raw_size,
1688 i386_register_virtual_size): New functions.
1690 * Makefile.in (ALLDEPFILES): Add i387-nat.c.
1691 (i387-nat.o): Add dependencies.
1695 * README: Mention problem with alpha-dec-osf5.1.
1699 * utils.c (internal_verror): Restore calls to abort().
1704 * MAINTAINERS: Update my entry.
1708 * symtab.c (operator_chars): Allow '*' and '[' to be quoted in
1709 operator names, to avoid regexp expansion.
1710 (search_symbols): Alloca buffer is too small, may get clobbered.
1714 * coff-solib.c (coff_solib_add): Add new readsyms arg.
1715 * irix5-nat.c (solib_add): Ditto.
1716 * osfsolib.c (solib_add): Ditto.
1717 * pa64solib.c (pa64_solib_add): Ditto.
1718 * pa64solib.c (add_to_solist): Ditto.
1719 * pa64solib.c (read_dld_descriptor): Ditto.
1720 * solib.c (solib_add): Ditto.
1721 * somsolib.c (som_solib_add): Ditto.
1722 * win32-nat.c (child_solib_add): Ditto.
1723 * xcoffsolib.c (solib_add): Ditto.
1725 * coff-solib.h (coff_solib_add): Add new readsyms arg to prototype.
1726 * pa64solib.c (add_to_solist): Ditto.
1727 * pa64solib.c (read_dld_descriptor): Ditto.
1728 * pa64solib.h (pa64_solib_add): Ditto.
1729 * solib.h (solib_add): Ditto.
1730 * somsolib.h (som_solib_add): Ditto.
1731 * config/i386/tm-cygwin.h (child_solib_add): Ditto.
1733 * coff-solib.c (coff_solib_add): If readsyms is zero don't read
1734 symbols but do any other needed work for shared libs.
1735 * irix5-nat.c: Ditto.
1736 * osfsolib.c (solib_add): Ditto.
1737 * solib.c (solib_add): Ditto.
1738 * win32-nat.c (child_solib_add): Ditto.
1739 * xcoffsolib.c (solib_add): Ditto.
1741 * irix5-nat.c (sharedlibrary_command): Pass 1 as readsyms to
1742 solib_add to force reading of shared library symbols.
1743 * osfsolib.c (sharedlibrary_command;): Ditto.
1744 * pa64solib.c (pa64_solib_sharedlibrary_command): Ditto.
1745 * solib.c (sharedlibrary_command): Ditto.
1746 * somsolib.c (som_solib_sharedlibrary_command): Ditto.
1747 * xcoffsolib.c (sharedlibrary_command): Ditto.
1749 * coff-solib.c (coff_solib_create_inferior_hook): Call solib_add
1750 unconditionally with auto_solib_add.
1751 * irix5-nat.c (solib_create_inferior_hook): Ditto.
1752 * osfsolib.c (solib_create_inferior_hook): Ditto.
1753 * solib.c (solib_create_inferior_hook): Ditto.
1754 * solib-osf.c (osf_solib_create_inferior_hook): Ditto.
1755 * solib-svr4.c (enable_break): Ditto.
1756 * solib-sunos.c (sunos_solib_create_inferior_hook): Ditto.
1758 * corelow.c (solib_add_stub): Add auto_solib_add to args passed
1760 * sol-thread.c (sol_thread_attach): Ditto.
1761 * config/rs6000/nm-rs6000.h (SOLIB_ADD): Ditto.
1763 * infcmd.c (attach_command): Remove auto_solib_add decl.
1764 Call SOLIB_ADD directly with auto_solib_add.
1765 * infrun.c (handle_inferior_event): Ditto.
1767 * coff-solib.h (SOLIB_ADD): Add readsyms arg.
1768 * pa64solib.h (SOLIB_ADD): Ditto.
1769 * solib.h (SOLIB_ADD): Ditto.
1770 * somsolib.h (SOLIB_ADD): Ditto.
1771 * config/i386/tm-cygwin.h (SOLIB_ADD): Ditto.
1773 * fork-child.c (clone_and_follow_inferior): Remove unused
1774 auto_solib_add decl.
1776 * pa64solib.c (pa64_solib_add): Call add_to_solist with readsyms.
1777 (read_dld_descriptor): Ditto.
1778 (pa64_solib_add): Call read_dld_descriptor with readsyms.
1779 (pa64_solib_in_dynamic_linker): Ditto.
1781 * corelow.c (symfile.h): Need this for auto_solib_add declaration.
1782 * sol-thread.c (symfile.h): Ditto.
1786 * s390-nat.c (s390_remove_watchpoint): Use xfree.
1787 (s390_insert_watchpoint): Use xmalloc.
1791 * varobj.c: Replace value_ptr with ``struct value *''.
1795 * varobj.c: Re-indent.
1799 * x86-64-tdep.c (value_push, x86_64_push_arguments): Replace
1800 ``value_ptr'' with ``struct value *''.
1801 * s390-tdep.c (s390_push_arguments): Ditto.
1805 * ppc-tdep.h: Add #ifndef wrapper. Replace value_ptr with
1807 (struct frame_info, struct value): Add opaque declarations.
1811 * arch-utils.c (generic_in_solib_call_trampoline): New function.
1812 * arch-utils.h (generic_in_solib_call_trampoline): Extern declaration.
1813 * gdbarch.c: Regenerated from gdbarch.sh.
1815 * gdbarch.sh (function_list): Add `IN_SOLIB_CALL_TRAMPOLINE' definition.
1816 * infrun.c (IN_SOLIB_CALL_TRAMPOLINE): Remove macro.
1821 * s390-tdep.c: (s390_gdbarch_init): Don't initialize
1822 find_solib_trampoline_target.
1826 * remote-vx.c (net_wait): Fix typo from PIDGET change.
1830 * config/i386/tm-i386.h (REGISTER_NAMES): Remove.
1831 (REGISTER_NAME): New define.
1832 (i386_register_name): New prototype.
1833 * i386-tdep.c (i386_register_names): New variable.
1834 (i386_register_name): New function.
1835 * config/i386/tm-i386os9k.h, config/i386/tm-ptx.h,
1836 config/i386/tm-symmetry.h: Undefine REGISTER_NAME instead of
1841 * win32-nat.c (register_loaded_dll): Attempt to ensure that the case of
1842 the loaded DLL matches the on-disk case since the debugging API does
1843 not seem to ensure this. Calculate max name length here.
1844 (handle_load_dll): Move max name length calculation to
1845 register_loaded_dll.
1849 * arm-linux-nat.c: Include <asm/ptrace.h> explicitly.
1853 * wrapper.h (gdb_value_struct_elt): New function.
1854 * wrapper.c (gdb_value_struct_elt): Ditto.
1855 (do_captured_value_struct_elt): Ditto.
1859 * README, NEWS: Update for 5.1.
1863 * configure.in (WERROR_CFLAGS): Use AC_TRY_COMPILE to test the
1865 * configure: Re-generate.
1869 * somsolib.c (som_solib_add): A megabyte is 1024*1024 bytes.
1870 * pa64solib.c (add_to_solist): Ditto.
1871 * win32-nat.c (_initialize_inftarg): Remove unnecessary
1872 initialization of auto_solib_add, it defaults to 1.
1876 * symfile.c (auto_solib_add): Update comment to note that
1877 this variable is now just used as a boolean to control shlib
1878 autoloading, and clarify when it is used.
1879 * symfile.h (auto_solib_add): Ditto.
1881 * symfile.c (auto_solib_limit): New variable that holds the
1882 autoloading threshold instead of overloading auto_solib_add.
1883 * symfile.h (auto_solib_limit): Ditto.
1885 * irix5-nat.c (_initialize_solib): Change auto-solib-add
1886 variable from var_zinteger to var_boolean and update help.
1887 * osfsolib.c (_initialize_solib): Ditto.
1888 * pa64solib.c (_initialize_pa64_solib): Ditto.
1889 * solib.c (_initialize_solib): Ditto.
1890 * somsolib.c (_initialize_som_solib): Ditto.
1891 * xcoffsolib.c (_initialize_solib): Ditto.
1893 * pa64solib.c (pa64_solib_total_st_size): Update comment to
1894 note that the new auto_solib_limit variable is used instead
1895 of overloading auto_solib_add variable.
1896 (_initialize_pa64_solib): Ditto.
1897 * somsolib.c (som_solib_total_st_size): Ditto.
1898 (_initialize_som_solib): Ditto.
1900 * pa64solib.c (_initialize_pa64_solib): Add new set/show
1901 commands for auto-solib-limit variable.
1902 * somsolib.c (_initialize_som_solib): Ditto
1904 * pa64solib.c (add_to_solist): Check that auto_solib_add is
1905 set and use auto_solib_limit as the threshold size instead
1907 * somsolib.c (som_solib_add): Ditto, and also change warning
1908 text about size threshold exceeded.
1912 * config/i386/tm-i386v.h: Don't include "regcache.h".
1913 (EXTRACT_RETURN_VALUE, STORE_RETURN_VALUE, FRAME_CHAIN,
1914 FRAMELESS_FUNCTION_INVOCATION, FRAME_SAVED_PC, FRAME_NUM_ARGS):
1915 Remove macros. The versions from "tm-i386.h" should work fine
1916 (and in most cases even better).
1920 * i386-tdep.c (i386_extract_return_value): Use
1921 convert_typed_floating to extract floating-point value from
1923 (i386_store_return_value): Use convert_typed_floating to store
1924 floating-point return balue in register buffer
1925 (i386_register_virtual_type): Change type of floating-point
1926 registers to builtin_type_i387_ext.
1927 (i386_register_convert_to_virtual): Use convert_typed_floating to
1929 (i386_register_convert_to_raw): Likewise.
1933 * doublest.h (convert_typed_floating): New prototype.
1934 * doublest.c (convert_typed_floating): New function.
1938 * doublest.c: Improve comments a bit.
1939 (floatformat_from_length): New function.
1940 (NAN): Define to 0.0 if not already defined.
1941 (extract_floating): Rewrite to use floatformat_from_length. Warn
1942 instead of error if LEN doesn't match a known floating-point type,
1943 and return NaN (or 0.0 if NaN isn't available) in that case.
1944 (store_floating): Likewise, but zero out the target byte-stream if
1945 LEN doesn't match a known floating-point type.
1946 (extract_typed_floating): Reformat a bit.
1947 (store_typed_floating): Reformat a bit. Add comment about zeroing
1948 out padding in the target buffer.
1949 * doublest.h (extract_floating, store_floating): Fix comment about
1950 deprecation of these functions. Add parameter names to prototypes.
1954 * i387-tdep.c (print_i387_value): Use extract_typed_floating to
1955 convert RAW to a DOUBLEST instead of extract_floating.
1957 * gdbtypes.c (_initialize_gdbtypes): Set floating-point type for
1958 builtin_type_i387_ext to floatformat_i387_ext.
1962 * arm-linux-nat.c (fill_gregset): Do not check register_valid[].
1963 (fill_fpregset): Likewise.
1967 * cris-tdep.c (constraint): Loop through the whole cris_spec_regs
1968 struct, not just the NUM_SPECREGS first entries.
1969 (bdap_prefix): Read PC before autoincrement.
1973 * win32-nat.c (DebugSetProcessKillOnExit): New static function
1974 pointer to Windows' DebugSetProcessKillOnExit() function.
1975 (DebugActiveProcessStop): Ditto for DebugActiveProcessStop().
1976 (has_detach_ability): New function.
1977 (child_attach): If system has detach ability, enable it.
1978 (child_detach): If system has detach ability, actually
1979 detach from process.
1980 Change tty output to Linux format.
1984 Isolate STABS readers' use of the `textlow' and `texthigh' fields
1985 of `struct partial_symtab' to only a few locations. This change
1986 is not supposed to affect the way the values are computed, only
1989 * dbxread.c (struct symloc): Add `textlow' and `texthigh' fields
1990 to the reader-specific structure.
1991 * mdebugread.c (struct symloc): Same.
1992 * dbxread.c (TEXTLOW, TEXTHIGH): New accessor macros.
1993 * mdebugread.c (TEXTLOW, TEXTHIGH): Same.
1994 * dbxread.c (dbx_symfile_read): After we've built all our partial
1995 symbol tables, set each partial symtab's `textlow' and `texthigh'
1996 fields from our reader-specific structure.
1997 * mdebugread.c (mdebug_build_psymtabs): Same.
1998 * dbxread.c (start_psymtab): Initialize the reader-specific
1999 structure's `textlow' and `texthigh' from the new psymtab's.
2000 * mdebugread.c (parse_partial_symbols, new_psymtab): Same.
2001 * dbxread.c (read_dbx_symtab, end_psymtab, read_ofile_symtab): Use
2002 the reader-specific `textlow' and `texthigh', not the generic
2004 * mdebugread.c (parse_lines, parse_partial_symbols,
2005 psymtab_to_symtab_1): Same.
2006 * partial-stab.h: Same.
2010 * hp-psymtab-read.c, hppah-nat.c, hppa-tdep.c: Fix -Wformat
2015 * somsolib.c (som_solib_add): Use core_addr_to_host_pointer.
2016 (som_solib_desire_dynamic_linker_symbols): Compare integers with
2018 * hp-psymtab-read.c (hpread_call_pxdb): Make parameter constant.
2022 * top.c (print_gdb_version): Do not print ``(MI_OUT)''. MI
2023 interface is always enabled.
2027 * Makefile.in: Replace top.h with $(top_h). Replace expression.h
2028 with $(expression_h). Replace command.h with $(command_h).
2029 (language_h): Define. Replace language.h with $(language_h).
2030 Replace call-cmds.h with $(call_cmds_h). Replace varobj.h with
2032 (wrapper_h, valprint_h, objfiles_h, complaints_h): Ditto.
2033 (serial_h, hpread_h, buildsym_h, stabsread_h): Ditto.
2034 (xcoffsolib_h, gdb_stabs_h, linespec_h): Ditto.
2035 (bcache_h, gdb_events_h, monitor_h): Ditto.
2036 (ser_unix_h, source_h): Ditto.
2037 (varobj_h): Update list.
2039 * call-cmds.h: Add CALL_CMDS_H macro wrapper.
2040 * solist.h: Add SOLIST_H macro wrapper.
2041 * monitor.h: Add MONITOR_H macro wrapper.
2042 * typeprint.h: Add TYPEPRINT_H macro wrapper.
2043 * xcoffsolib.h: Add XCOFFSOLIB_H macro wrapper.
2044 * valprint.h: Add VALPRINT_H macro wrapper.
2045 * top.h: Add TOP_H macro wrapper.
2049 * config/a29k/tm-vx29k.h, i386-tdep.c: Include "value.h".
2050 * arm-tdep.c, exec.c, ia64-tdep.c, infrun.c: Ditto.
2051 * ppc-linux-tdep.c, remote-es.c, remote.c: Ditto.
2052 * rs6000-tdep.c, s390-tdep.c, x86-64-tdep.c: Ditto.
2053 * Makefile.in (arm-tdep.o, exec.o, i386-tdep.o, ia64-tdep.o)
2054 (infrun.o, ppc-linux-tdep.o, remote.o, rs6000-tdep.o)
2055 (x86-64-tdep.o): Update dependencies.
2056 * gdbarch.sh [!GDB_MULTI_ARCH]: Include "value.h".
2057 * gdbarch.h, gdbarch.c: Re-generate.
2061 * infptrace.c (child_xfer_memory): Fix a few coding standards
2066 * config/djgpp/README: Fix a typo and tweak for GDB 5.1.
2070 * jv-lang.h: Add #ifndef JV_LANG_H wrapper.
2071 (struct value): Add opaque declaration. Replace value_ptr with
2073 * jv-valprint.c, jv-lang.c: Replace value_ptr with equivalent
2076 * wrapper.h (struct value): Add opaque declaration. Replace
2077 value_ptr with ``struct value *''.
2078 * wrapper.c: Replace value_ptr with ``struct value *''.
2079 * breakpoint.h, breakpoint.c: Ditto.
2080 * cp-abi.h, hpacc-abi.c, gnu-v2-abi.c, cp-abi.c: Ditto.
2084 * alpha-nat.c: Include <alpha/coreregs.h> instead of
2086 (fetch_osf_core_registers): Define core_reg_mapping in a way that
2087 works on OSF5 as well as previous OSF versions.
2091 * win32-nat.c (handle_load_dll): Avoid strlwr'ing loaded DLLs or cygwin
2092 may not be able to read them in certain situations.
2096 * config/powerpc/nbsd.mt (SIM_OBS, SIM): Define.
2097 * config/powerpc/linux.mt (SIM, SIM_OBS): Ditto
2101 * README: Mention problems with HP/UX.
2107 * utils.c (core_addr_to_string): New function for conversion of
2108 CORE_ADDR to string.
2109 (string_to_core_addr): New function to convert from string to
2111 * defs.h: Added extern statements for the above.
2115 * symtab.c (lookup_block_symbol): Break out of linear search
2116 if we're past the range of possible matches.
2120 * win32-nat.c (safe_symbol_file_add_stub): Improve logic for avoiding
2121 load of already loaded DLL.
2122 (register_loaded_dll): Convert loaded DLL name to "posix" format or it
2123 will confuse subsequent opening of the filename due to dos paths.
2124 (dll_symbol_command): Pass from_tty parameter to safe_symbol_file_add.
2128 * symtab.c (lookup_block_symbol): Update comment.
2132 * value.h (value_as_address): Rename value_as_pointer.
2133 * eval.c, findvar.c, gnu-v2-abi.c, gnu-v3-abi.c, jv-lang.c,
2134 jv-valprint.c, printcmd.c, stack.c, top.c, valarith.c, valops.c,
2139 * valarith.c (value_sub): Don't pass a raw type to
2140 value_from_pointer, it has to go through check_typedef first.
2144 * gdbarch.sh (fallbackdefault): Set to one when predefault is
2146 * gdbarch.h: Regenerate.
2150 * mips-tdep.c (mips_integer_to_address): New function.
2151 (mips_gdbarch_init): Initialize pointer_to_address,
2152 address_to_pointer and integer_to_address.
2154 * config/mips/tm-mips.h (POINTER_TO_ADDRESS): Delete
2155 (ADDRESS_TO_POINTER): Delete.
2157 * d10v-tdep.c (d10v_integer_to_address): New function.
2158 (d10v_gdbarch_init): Initialize integer_to_address.
2160 * values.c (value_as_pointer): Use INTEGER_TO_ADDRESS when
2163 * gdbarch.sh (INTEGER_TO_ADDRESS): New predicate and function.
2164 * gdbarch.h, gdbarch.c: Regenerate.
2168 * config/s390/nm-linux.h: Don't include <signal.h>.
2169 (lin_lwp_attach_lwp, ATTACH_LWP, lin_thread_get_thread_signals,
2170 GET_THREAD_SIGNAL): Remove.
2172 * config/nm-linux.h (struct objfile): Remove forward declaration.
2173 (linuxthreads_new_objfile): Remove prototype.
2174 (linuxthreads_pid_to_str): Remove prototype.
2175 (PREPARE_TO_PROCEED): Redefine in terms of
2176 lin_lwp_prepare_to_proceed.
2177 (struct target_waitstatus): Forward declaration.
2178 (child_wait): New prototype.
2179 (CHILD_WAIT): Define.
2180 (lin_lwp_attach_lwp, ATTACH_LWP, lin_thread_get_thread_signals,
2181 GET_THREAD_SIGNAL): Moved here from arch-specific files.
2182 * config/alpha/nm-linux.h, config/arm/nm-linux.h,
2183 config/ia64/nm-linux.h, config/mips/nm-linux.h,
2184 config/powerpc/nm-linux.h: Don't include <signal.h>.
2185 (lin_lwp_attach_lwp, ATTACH_LWP, lin_thread_get_thread_signals,
2186 GET_THREAD_SIGNAL): Remove.
2187 * config/i386/nm-linux.h: Likewise.
2188 (struct target_waitstatus, child_wait, CHILD_WAIT): Remove.
2189 * config/m68k/linux.mh, config/sparc/linux.mh (NATDEPFILES):
2190 Remove linux-thread.o. Add proc-service.o, thread-db.o and
2192 (LOADLIBES): New variable.
2194 * sparc-nat.c (fetch_core_registers): Remove redundant prototype.
2196 * proc-service.c (BUILD_LWP): Redefine in terms of ptid_build.
2198 Fix attaching to cloned processes. This fixes PR gdb/61.
2199 * lin-lwp.c (struct lwp_info): Add new member `cloned'.
2200 (is_cloned) Removed.
2201 (lin_lwp_attach_lwp): Don't call stop_wait_callback. Instead call
2202 waitpid explicitly. Mark the LWP as cloned if waitpid fails and
2203 retry with __WCLONE flag.
2204 (lin_lwp_attach): Likewise. Warn if attaching to a cloned process.
2205 (detach_callback): Replace use of is_cloned with explicit check on
2206 LWP id and process id.
2207 (stop_wait_callback): Replace use of is_cloned with check if LWP
2208 is marked as cloned.
2209 [CHILD_WAIT] (child_wait): New function.
2210 (lin_lwp_wait): Replace use of is_cloned with check if LWP is
2211 marked as cloned. Mark newly detected LWPs as cloned if detected
2212 by waitpid with __WCLONE flag.
2213 (kill_wait_callback): Replace use of is_cloned with check if LWP
2214 is marked as cloned.
2215 * config/i386/nm-linux.h (struct target_waitstatus): Add forward
2217 (child_wait): Add prototype.
2218 (CHILD_WAIT): Define.
2222 S/390 31 & 64 bit target and GNU/Linux native support.
2224 * s390-nat.c, s390-tdep.c: New file.
2225 * config/s390/nm-linux.h, config/s390/s390.mh: New file.
2226 * config/s390/s390.mt, config/s390/s390x.mt: New file.
2227 * config/s390/tm-linux.h, config/s390/tm-s390.h: New file.
2228 * config/s390/xm-linux.h: New file.
2230 * MAINTAINERS: Update.
2235 * gdbarch.sh: Fixed CALL_DUMMY_BREAKPOINT_OFFSET to check
2236 CALL_DUMMY_BREAKPOINT_OFFSET_P.
2237 * gdbarch.c: Regenerate.
2241 * thread-db.c: Fix a few formatting mistakes.
2245 * win32-nat.c (safe_symbol_file_add_stub): Properly initialize linked
2246 list pointer to beginning rather than one beyond beginning.
2250 * symtab.h (struct block): (ALL_BLOCK_SYMBOLS): New macro.
2252 * symtab.c (find_pc_sect_symtab): Use ALL_BLOCK_SYMBOLS.
2253 (make_symbol_completion_list): Likewise.
2254 (make_symbol_overload_list): Likewise.
2255 * buildsym.c (finish_block): Likewise.
2256 * breakpoint.c (get_catch_sals): Likewise.
2257 * mdebugread.c (mylookup_symbol): Likewise.
2258 * objfiles.c (objfile_relocate): Likewise.
2259 * printcmd.c (print_frame_args): Likewise.
2260 * stack.c (print_block_frame_locals): Likewise.
2261 (print_block_frame_labels): Likewise.
2262 (print_frame_arg_vars): Likewise.
2263 * symmisc.c (dump_symtab): Likewise.
2264 * tracepoint.c (add_local_symbols): Likewise.
2265 (scope_info): Likewise.
2269 * minsyms.c (msymbol_hash): Use better hash function.
2270 (msymbol_hash_iw): Likewise. Terminate loop at '(' properly.
2272 * objfiles.h: Increase MINIMAL_SYMBOL_HASH_SIZE to match modern
2277 * printcmd.c (print_frame_args): Move symbol iteration explicitly
2278 inside the func != NULL block.
2282 * MAINTAINERS (Misc): Add Ian Roxborough as tcl/, tk/ and itcl/
2287 * config/i386/tm-cygwin.h: Include tm-i386.h instead of tm-i386v.h.
2288 This fixes errors in "long long" handling for 'finish' and 'return'
2293 * win32-nat.c (safe_symbol_file_add_stub): Avoid adding a shared
2294 library if it has already been loaded.
2295 (safe_symbol_file_add_cleanup): Don't mess with stderr or we won't see
2297 (safe_symbol_file_add): Ditto.
2298 (solib_symbols_add): Make static. Accept 'from_tty' parameter. Pass
2299 it to safe_symbol_file_add.
2300 (core_dll_symbols_add): Accomodate extra solib_symbols_add parameter.
2301 (child_solib_add): Ditto.
2303 * win32-nat.c (handle_exception): Don't print "first chance"
2305 (get_child_debug_event): Continue from exceptions if !handle_exception.
2309 * symtab.c (lookup_symtab): Removed.
2310 (lookup_symtab_1): Renamed to lookup_symtab.
2314 * win32-nat.c (get_child_debug_event): Close file handles created after
2315 process creation and DLL load.
2316 (child_create_inferior): Close unneeded process/thread handle after
2321 * mn10300-tdep.c (mn10300_analyze_prologue): Doc fixes.
2325 * varobj.c (cplus_value_of_child): Deal with a failure
2326 to dereference a pointer object.
2330 * hpux-thread.c: rewrite find_active_thread() and find_tcb()
2331 to use ptid_t, instead of overloading the thread and the pid
2332 into the same 32-bit value. Make associated necessary adaptations.
2333 Also remove unused variable cached_active_thread.
2337 * MAINTAINERS (powerpc, SCO/Unixware, Solaris/x86): Remove my
2342 * config/alpha/tm-fbsd.h (FRAME_CHAIN_VALID): Define.
2346 * main.c (enable_external_editor): Don't declare.
2347 (captured_main): Don't set enable_external_editor.
2351 * Makefile.in (ALLDEPFILES): Add solib-svr4.c and solib-sunos.c
2353 (solib-sunos.o): Add dependencies.
2354 (solib-svr4.o): Revise dependencies.
2355 * solib-svr4.c: Remove SunOS shared library support.
2356 * solib-sunos.c: New file, created from solib-svr4.c, which still
2357 contains SunOS shared library support, but no SVR4 support.
2359 * config/i386/nbsd.mh (NATDEPFILES): Remove solib-svr4.o and
2360 solib-legacy.o from this list. Add solib-sunos.o.
2361 * config/i386/sun386.mt (TDEPFILES): Likewise.
2362 * config/m68k/nbsd.mh (NATDEPFILES): Likewise.
2363 * config/m68k/sun2os4.mt (TDEPFILES): Likewise.
2364 * config/m68k/sun3os4.mt (TDEPFILES): Likewise.
2365 * config/ns32k/nbsd.mh (NATDEPFILES): Likewise.
2366 * config/sparc/nbsd.mh (NATDEPFILES): Likewise.
2367 * config/sparc/sun4os4.mt (TDEPFILES): Likewise.
2371 * Makefile.in (mipsread.o): Remove old dependency on partial-stab.h.
2375 * xcoffread.c (N_UNDF, N_ABS, N_TEXT, N_DATA, N_BSS, N_COMM, N_FN,
2376 N_EXT, N_INDR, N_SETA, N_SETT, N_SETD, N_SETB, N_SETV,
2377 CUR_SYMBOL_TYPE, CUR_SYMBOL_VALUE, START_PSYMTAB, END_PSYMTAB,
2378 SET_NAMESTRING): Delete definitions.
2379 Don't include language.h any more.
2380 Don't include partial-stab.h any more.
2381 (scan_xcoff_symtab): Don't jump through hoops to reuse code in
2382 partial-stab.h, include the code directly, instead.
2384 * Makefile.in (xcoffread.o): Remove dependency on partial-stab.h.
2388 * infcmd.c (do_registers_info): Delete code dumping large
2389 registers. Handled by val_print.
2393 * gdbarch.sh (gdbarch_alloc): Name the new architecture
2394 ``current_gdbarch'' so that it, and not the identically named
2395 global is refered to by macros.
2396 * gdbarch.c: Regenerate.
2400 * cli/cli-decode.c (add_set_boolean_cmd): Define.
2401 * cli/cli-decode.h (add_set_boolean_cmd): Declare.
2402 * command.h (add_set_boolean_cmd): Ditto.
2403 * remote.c (_initialize_remote): Use add_set_boolean_cmd for "set
2408 * gdbarch.sh (gdbarch_dump): Sort output.
2409 * gdbarch.c: Regenerate.
2413 * rs6000-tdep.c (rs6000_gdbarch_init): Don't use the previous
2414 architecture to infer the wordsize. Previous architecture may not
2419 * infttrace.c (kill_inferior): Issue a TT_PROC_EXIT request rather
2420 than a TT_PROC_STOP request to kill the inferior and its child
2421 processes. Otherwise, the inferior is not killed on HPUX 11.0.
2422 Removed the code that detaches the child processes since we just
2427 * serial.c (serial_set_cmdlist, serial_show_cmdlist): New
2429 (serial_set_cmd, serial_show_cmd): New functions.
2430 (_initialize_serial): Add "set/show serial" command.
2434 * CONTRIBUTE: Update.
2438 * solib-svr4.h (set_solib_svr4_fetch_link_map_offsets): Add
2439 argument ``gdbarch''.
2440 * solib-svr4.c (SVR4_FETCH_LINK_MAP_OFFSETS): Change default value.
2441 (default_svr4_fetch_link_map_offsets): Rename to
2442 legacy_fetch_link_map_offsets().
2443 (svr4_fetch_link_map_offsets): New function.
2444 (fetch_link_map_offsets, fetch_link_map_offsets_init): Deleted.
2445 (fetch_link_map_offsets_gdbarch_data): New static global.
2446 (set_solib_svr4_fetch_link_map_offsets): Add argument ``gdbarch''.
2447 Revise to invoke set_gdbarch_data().
2448 (init_fetch_link_map_offsets): Change return type and add an
2449 argument so that it may be used as a gdbarch_data initializer.
2450 (_initialize_svr4_solib): Eliminate use of gdbarch swap mechanism.
2451 Use gdbarch data mechanism instead.
2455 * x86-64-linux-tdep.c (LINUX_SIGINFO_SIZE): Add.
2456 (x86_64_linux_sigcontext_addr): Replace `sizeof (struct siginfo)'
2457 by LINUX_SIGINFO_SIZE.
2461 * maint.c (maintenance_set_cmdlist, maintenance_show_cmdlist): New
2463 (maintenance_set_profile_cmd): New function.
2464 (maintenance_show_cmd, maintenance_set_cmd): New functions.
2465 (_initialize_maint_cmds): Add "maintenance set" and "maintenance
2466 show" and, commented out, "maintenance set/show profile" commands.
2470 * findvar.c (read_var_value): For LOC_INDIRECT and LOC_REF_ARG
2471 convert the pointer into a CORE_ADDRs.
2475 * doublest.h (store_floating, extract_floating): Add comment
2476 indicating these functions are deprecated.
2477 (extract_typed_floating, store_typed_floating): Declare.
2478 * doublest.c: Include "gdbtypes.h".
2479 (extract_typed_floating, store_typed_floating): Define.
2481 * stabsread.c (define_symbol): Use store_typed_floating.
2482 * valarith.c (value_binop): Ditto.
2483 * values.c (unpack_long): Use extract_typed_floating.
2484 (unpack_double): Ditto.
2488 * cris-tdep.c (reg_mode_add_sub_cmp_and_or_move_op): Fetch operand1
2489 from correct register.
2493 * x86-64-linux-tdep.c (STRUCT_OFFSET): Removed.
2497 * config/i386/x86-64linux.mh: New file.
2498 * config/i386/x86-64linux.mt: New file.
2499 * config/i386/nm-x86_64.h: New file.
2500 * x86-64-linux-tdep.c: New file.
2501 * x86-64-linux-nat.c: New file.
2502 * x86-64-tdep.c: New file.
2503 * x86-64-tdep.h: New file.
2504 * i386-tdep.h: New file.
2505 * i387-nat.c: Include i386-tdep.h when multiarch.
2506 * i387-tdep.c: Ditto.
2507 * config/djgpp/fnchange.lst: Add entries for x86_64-linux-tdep.c
2508 and x86_64-linux-nat.c
2509 * Makefile.in: Add x86_64-linux-tdep.o, x86_64-tdep.o,
2510 x86_64-linux-tdep.o, x86_64-nat.o, update dependencies.
2514 * MAINTAINERS: Add myself to the write-after-approval list.
2515 * i386-nat.c (TARGET_HAS_DR_LEN_8, DR_LEN_8): Declare.
2516 (i386_length_and_rw_bits, i386_handle_nonaligned_watchpoint,
2517 i386_insert_watchpoint, i386_remove_watchpoint): Add support for
2518 8-byte wide watchpoints.
2519 (i386_show_dr): Debug message format string change.
2523 * c-exp.y (typebase): Accept (signed long long) as a type expr.
2527 better parsing of const and volatile type expressions.
2528 * c-exp.y (const_and_volatile, const_or_volatile_noopt,
2529 const_or_volatile): New non-terminals.
2530 (ptype): Use new rule for const_or_volatile.
2531 (typebase): Use new rule for const_or_volatile_noopt.
2532 * parser-defs.h (enum type_pieces): New values tp_const, tp_volatile.
2533 * parse.c (follow_types): Handle tp_const and tp_volatile on the
2534 type stack: call make_cv_type to create new const/volatile type.
2538 * solib-svr4.c (fetch_link_map_offsets): Add comment.
2539 (fetch_link_map_offsets_init): New static global.
2540 (set_solib_svr4_fetch_link_map_offsets, init_fetch_link_map_offsets):
2541 Revise implementation to use ``fetch_link_map_offsets_init''
2542 instead of ``fetch_link_map_offsets''.
2546 * coffread.c: Replace all occurrences of bfd_read with bfd_bread.
2547 * dbxread.c: Likewise.
2548 * dwarf2read.c: Likewise.
2549 * dwarfread.c: Likewise.
2550 * somread.c: Likewise.
2551 * ultra3-nat.c: Likewise.
2552 * xcoffread.c: Likewise.
2556 * cris-tdep.c (cris_get_signed_offset): Change return type to an
2557 explicitly signed char.
2559 * config/mcore/tm-mcore.h (mcore_virtual_frame_pointer): Update
2560 function signature to match recent tracepoint.c:encode_actions
2562 * mcore-tdep.c (mcore_virtual_frame_pointer): Ditto.
2566 * thread.c (do_captured_thread_select): Add uiout parameter.
2567 (do_captured_list_thread_ids): Ditto.
2568 * breakpoint.c (do_captured_breakpoint_query): Ditto.
2570 * breakpoint.c (gdb_breakpoint_query): Update. Use
2572 * thread.c (gdb_list_thread_ids): Ditto.
2573 (gdb_thread_select): Ditto.
2574 (thread_command): Pass uiout to gdb_thread_select.
2576 * gdb.h (gdb_breakpoint_query): Add parameter ui_out.
2577 (gdb_thread_select, gdb_list_thread_ids): Ditto.
2582 * solib.c (clear_solib): Call `remove_target_sections' to fix
2583 stale pointers in `struct target_ops'.
2584 * irix5-nat.c (clear_solib): Likewise.
2585 * osfsolib.c (clear_solib): Likewise.
2589 * monitor.c (monitor_load): Don't delete symtab users, or reset
2592 * monitor.c (monitor_load): Fix indentation.
2596 * printcmd.c (print_scalar_formatted): Compare the length of the
2597 value against the lengths of the target's floating-point types,
2598 not the host's. Add support for `long double'.
2600 * printcmd.c (print_scalar_formatted): Fix indentation.
2604 * rom68k-rom.c (init_rom68k_cmds): Set the flag indicating that
2605 programs running on the board can produce output.
2609 * NEWS: "ANS/ISO C" -> "ISO C".
2610 * MAINTAINERS (write-after-approval): Update my entry.
2614 * config/xm-aix4.h (MEM_FNS_DECLARED): Removed.
2616 * config/arm/xm-linux.h, config/ia64/xm-linux.h,
2617 config/m68k/xm-linux.h, config/mips/xm-linux.h,
2618 config/powerpc/xm-linux.h, config/sparc/xm-linux.h: Remove
2619 redundant inclusion of <unistd.h>.
2621 * gdbtypes.h (struct block): Add forward declaration.
2625 * defs.h (enum return_reason): Renumber so that all values are
2627 (RETURN_MASK): Negate reason.
2628 (catch_exception_ftype): Declare.
2629 (catch_exceptions): Declare.
2630 * top.c (catcher): New function, based on catch_errors. Add in
2631 parameter func_uiout and out parameters func_val, func_caught and
2632 func_cleanup. Change type of func to catch_exceptions_ftype.
2634 (struct catch_errors_args): Define.
2635 (do_catch_errors): New function.
2636 (catch_errors): Rewrite, use do_catch_errors and catcher.
2637 (catch_exceptions): New function, use catcher.
2641 Correctly parse register values provided by the monitor.
2642 * rom68k-rom.c: #include "value.h".
2643 (is_hex_digit, hex_digit_value, is_whitespace,
2644 rom68k_supply_one_register): New static functions.
2645 (rom68k_supply_register): Call rom68k_supply_one_register, instead
2646 of monitor_supply_register; the latter was incorrectly parsing
2648 * Makefile.in (rom68k-rom.o): Note that this now #includes value.h.
2652 * config/rs6000/xm-rs6000.h (setpgrp): Remove macro. GDB defaults
2653 to using setpgid if available now.
2658 * configure.in: Use ITCL_LIB_FULL_PATH and
2659 ITK_LIB_FULL_PATH to set Itcl and Itk dependancies
2661 * configure: Regenerated.
2665 * dbxread.c (process_one_symbol): Don't use error result from
2666 find_stab_function_addr().
2667 * partial-stab.h (case 'F'): Likewise.
2669 * partial-stab.h (case 'f'): Make SOFUN_ADDRESS_MAYBE_MISSING
2670 code match that used for case 'F'. This fixes the divergence
2671 that was introduced by my 1999-09-14 changes to partial-stab.h.
2675 * gdbarch.sh: Move include of dis-asm.h so it is generated earlier
2677 (TARGET_PRINT_INSN): Multiarch.
2678 * gdbarch.h: Regenerate.
2679 * gdbarch.c: Regenerate.
2681 * arch-utils.c (legacy_print_insn): New function.
2682 * arch-utils.h (legacy_print_insn): Export.
2684 * cris-tdep.c (cris_delayed_get_disassembler): Use
2685 TARGET_PRINT_INSN, instead of tm_print_insn.
2686 * d10v-tdep.c (print_insn): Ditto.
2687 * d30v-tdep.c (print_insn): Ditto.
2688 * m32r-tdep.c (dump_insn): Ditto.
2689 * v850-tdep.c (v850_scan_prologue): Ditto.
2690 * mcore-tdep.c (mcore_dump_insn): Ditto.
2691 * sh-tdep.c (sh_gdbarch_init): Set print_insn gdbarch field.
2695 * gdbtypes.h (struct type): Doc fix.
2700 * dbxread.c (free_header_files): Make global.
2701 (init_header_files): Likewise.
2702 * stabsread.h (free_header_files): Add prototype.
2703 (init_header_files): Likewise.
2704 * mdebugread.c (mdebug_build_psymtabs): Initialize
2705 properly before using the stabs debug reader.
2710 * dbxread.c (dbx_symfile_read): Only reinitialize
2711 the psymbol list if mainline or if both static
2712 and global lists are empty.
2713 * dwarf2read.c (dwarf2_build_psymtabs): Likewise.
2714 * dwarfread.c (dwarf_build_psymtabs): Likewise.
2715 * xcoffread.c (xcoff_initial_scan): Likewise.
2716 * os9kread.c (os9k_symfile_read): Likewise.
2721 * mdebugread.c (psymtab_to_symtab_1): Handle N_SO stabs without
2726 Make GDB use libiberty regex implementation.
2727 * gdb_regex.h: Normalize protection against multiple inclusion.
2728 Include "xregex.h" instead of "gnu-regex.h".
2729 * cli/cli-cmds.c: Include "gdb_regex.h" instead of "gnu-regex.h".
2730 * cli/cli-decode.c: Likewise.
2731 * Makefile.in (REGEX): Remove.
2732 (GDB_CFLAGS): Remove reference to gnu-regex.h in comment.
2733 (ADD_FILES, ADD_DEPS): Remove $(REGEX).
2735 (TAGFILES_NO_SRCDIR): Remove $(POSSLIBS).
2736 (irix5-nat.o, solib.o, solib-svr4.o, source.o, symtab.o,
2737 xcoffsolib.o, cli-decode.o, cli-cmd.o): Replace gnu-regex.h with
2738 gdb_regex.h in list of dependencies.
2739 (gnu-regex.o): Remove rule.
2740 * gnu-regex.c, gnu-regex.h: Remove files.
2744 * c-valprint.c (c_val_print): Second call to check_typedef ()
2745 is no longer necessary.
2749 * ia64-tdep.c (examine_prologue): Don't let a branch unit nop
2750 terminate the prologue scan.
2754 * symfile.c (sections_overlap): New function.
2755 (map_overlay_command): Call sections_overlap, instead of using
2756 incorrect logic to recognize overlapping sections.
2758 * symfile.c (load_command): Invalidate the overlay cache.
2762 * config/i386/xm-i386.h (HOST_BYTE_ORDER): Removed.
2767 * solib-svr4.c (enable_break): Check the inferior link map
2768 before assuming the inferior PC is at the start of the dynamic
2773 * frame.h (struct frame_info): Fix documentation on fields
2774 saved_regs, next and prev.
2778 * event-top.c (async_stop_sig) [HAVE_SIGPROCMASK]: Some
2779 gratuitious whitespace changes.
2780 [!HAVE_SIGPROCMASK]: Call sigsetmask if HAVE_SIGSETMASK is defined.
2781 * top.c: Remove redundant logic to define HAVE_SIGSETMASK.
2782 (sigsetmask) Don't define macro.
2783 (stop_sig) [HAVE_SIGPROCMASK]: Add bit of code snatched from
2784 async_stop_sig from event-top.c.
2785 [!HAVE_SIGPROCMASK]: Call sigsetmask if HAVE_SIGSETMASK is
2787 * configure.in (AC_CHECK_FUNCS): Put functions in alphabetical
2788 order. Add sigsetmask.
2789 (AC_FUNC_VFORK, AC_FUNC_ALLOCA): Reorder such that they're in
2791 * config/xm-aix4.h, config/alpha/xm-alphalinux.h,
2792 config/i386/xm-cygwin.h, config/rs6000/xm-rs6000.h
2793 (HAVE_SIGSETMASK): Remove.
2794 * aclocal.m4, config.in, configure: Regenerated.
2799 * config/powerpc/nbsd.mh (XM_FILE): Delete.
2803 * doublest.h (HOST_FLOAT_FORMAT): Delete macro.
2804 (HOST_DOUBLE_FORMAT): Delete macro.
2808 * config/xm-lynx.h, config/xm-nbsd.h, config/xm-sysv4.h,
2809 config/i386/xm-i386aix.h, config/m68k/xm-dpx2.h: Remove redundant
2810 inclusion of <limits.h>.
2814 * regcache.c (read_register_bytes): When REGISTER_NAME indicates
2815 that a register should be ignored, supply a value for the register
2816 from the raw registers[] buffer.
2820 * go32-nat.c (go32_create_inferior): Use xfree instead of free.
2821 * config/djgpp/fnchange.lst: Add entries for i386bsd-tdep.c and
2826 * gdbtypes.h (builtin_type_ieee_single_big)
2827 (builtin_type_ieee_single_little, builtin_type_ieee_double_big)
2828 (builtin_type_ieee_double_little)
2829 (builtin_type_ieee_double_littlebyte_bigword)
2830 (builtin_type_i387_ext, builtin_type_m68881_ext)
2831 (builtin_type_i960_ext, builtin_type_m88110_ext)
2832 (builtin_type_m88110_harris_ext, builtin_type_arm_ext_big)
2833 (builtin_type_arm_ext_littlebyte_bigword)
2834 (builtin_type_ia64_spill_big, builtin_type_ia64_spill_little)
2835 (builtin_type_ia64_quad_big)
2836 (builtin_type_ia64_quad_little): Declare.
2837 * gdbtypes.c (builtin_type_ieee_single_big)
2838 (builtin_type_ieee_single_little, builtin_type_ieee_double_big)
2839 (builtin_type_ieee_double_little)
2840 (builtin_type_ieee_double_littlebyte_bigword)
2841 (builtin_type_i387_ext, builtin_type_m68881_ext)
2842 (builtin_type_i960_ext, builtin_type_m88110_ext)
2843 (builtin_type_m88110_harris_ext, builtin_type_arm_ext_big)
2844 (builtin_type_arm_ext_littlebyte_bigword)
2845 (builtin_type_ia64_spill_big, builtin_type_ia64_spill_little)
2846 (builtin_type_ia64_quad_big)
2847 (builtin_type_ia64_quad_little): Define.
2848 (_initialize_gdbtypes): Initialize builtin floatformat types.
2852 * tracepoint.c (read_actions): Add FIXME for code depending on
2857 * remote-mips.c (pmon_load_fast): Add ui_load_progress_hook
2859 (mips_load_srec): Ditto.
2863 * gdbtypes.c (build_gdbtypes): Initialize TYPE_FLOATFORMAT field
2864 of builtin_type_float, builtin_type_double and
2865 builtin_type_long_double.
2866 (recursive_dump_type): Print the floatformat name.
2867 * gdbtypes.h (struct type): Add type_specific field floatformat.
2868 (TYPE_FLOATFORMAT): Define
2872 * printcmd.c (print_insn): Use the given stream for
2877 * arm-tdep.c (convert_from_extended, convert_to_extended): Delete
2878 assembler version of function.
2879 (convert_from_extended, convert_to_extended): Rewrite. Use
2880 floatformat_to_doublest, floatformat_from_doublest,
2881 floatformat_arm_ext_big, floatformat_arm_ext_littlebyte_bigword.
2882 (arm_push_arguments): Use extract_floating and store_floating to
2883 perform floating point conversions.
2884 (SWAP_TARGET_AND_HOST): Delete macro.
2885 * arm-linux-tdep.c (arm_linux_push_arguments): Use
2886 extract_floating and store_floating to perform floating point
2891 * gdbtypes.h (struct type): Clarify meaning of field ``length''.
2895 * varobj.c (varobj_update): Change first parameter to
2896 pointer to struct varobj*. This function can delete
2897 varobjs, so we need to give callers the new varobj
2899 (value_of_root): Update "var", too, if "var_handle"
2901 * varobj.h (varobj_update): Likewise.
2905 * Makefile.in (varobj_h): Define.
2906 (mi-cmd-var.o): Depends on varobj_h.
2907 (gdbtk-varobj.o): Change varobj.h to $(varobj_h).
2911 * configure.in (GDBTK_SRC_DIR): We must have autoconf
2912 give us the absolute path to the source directory.
2913 * configure: Regenerated.
2914 * Makefile.in (GDBTK_SRC_DIR): Add variable so that
2915 autoconf can substitue it in for us.
2916 (gdbtk.o): Pass in GDBTK_SRC_DIR instead of srcdir. We
2917 really do need an absolute pathname.
2921 * Makefile.in (GDBTK_VERSION): Set a version number.
2922 (GDBTK_LIBRARY): New variable to point to location where
2923 gdbtk will install its tcl library. Changed all refereneces
2924 to $(datadir)/insight1.0 to $(GDBTK_LIBRARY).
2925 (SUBDIR_GDBTK_ALL): Remove "all-gdbtk". No longer needed.
2926 (SUBDIR_GDBTK_CLEAN): Remove "clean-gdbtk". No longer needed.
2927 (all-gdbtk): Remove.
2928 (install-gdbtk): Remove.
2929 (gdbtk.o): Pass srcdir to file when compiling.
2933 * Makefile.in: Changed all references to the install directory
2934 "gdbtcl" to read "insight1.0".
2938 * arch-utils.c (generic_skip_trampoline_code): New function.
2939 * arch-utils.h (generic_skip_trampoline_code): Declare external.
2940 * gdbarch.c: Regeberated from gdbarch.sh.
2942 * gdbarch.sh (SKIP_TRAMPOLINE_CODE): Multi-arch.
2943 * infrun.c: Remove default setting of SKIP_TRAMPOLINE_CODE macro.
2948 * partial-stab.h: valu should be a CORE_ADDR.
2952 * dbxread.c (SWAP_SYMBOL): Removed.
2953 (INTERNALIZE_SYMBOL): Check sign extended vma.
2957 * top.c (SIGSETJMP): Protect env argument with parentheses.
2958 (SIGLONGJMP): Protect env argument with parentheses.
2962 * config/mn10300/mn10300.mt (TM_FILE): Delete.
2963 * configure.tgt: Add mn10300 to list of mulit-arch targets.
2964 * config/mn10300/tm-mn10300.h: Delete file. Move contents ...
2965 * mn10300-tdep.c: To here.
2969 * config/i386/tm-symmetry.h (REGISTER_CONVERT_TO_VIRTUAL): Make
2970 val a DOUBLEST. Use floatformat_to_doublest.
2971 (REGISTER_CONVERT_TO_RAW): Ditto. Use foatformat_from_doublest.
2972 * config/m88k/tm-m88k.h (REGISTER_CONVERT_TO_VIRTUAL): Ditto.
2973 (REGISTER_CONVERT_TO_RAW): Ditto.
2977 * config/mn10300/tm-mn10300.h (PC_REGNUM, SP_REGNUM): Delete.
2978 * mn10300-tdep.c (mn10300_gdbarch_init): Initialize pc_regnum and
2983 * doublest.c (convert_doublest_to_floatformat): Rename
2984 floatformat_from_doublest. Make static.
2985 (convert_floatformat_to_doublest): Rename floatformat_to_doublest.
2987 (floatformat_to_doublest): New function.
2988 (floatformat_from_doublest): New function.
2989 (host_float_format, host_double_format, host_long_double_format):
2990 New static variables.
2991 (store_floating, extract_floating): Always use
2992 floatformat_to_doublest and floatformat_from_doublest.
2993 * doublest.h (HOST_LONG_DOUBLE_FORMAT): Delete macro.
2997 * config/mn10300/tm-mn10300.h (INIT_FRAME_PC): Delete.
2998 * mn10300-tdep.c (mn10300_gdbarch_init): Initialize init_frame_pc.
3002 * target.h (TARGET_VIRTUAL_FRAME_POINTER): Delete, multi-arched.
3003 * gdbarch.sh (TARGET_VIRTUAL_FRAME_POINTER): Add.
3004 * gdbarch.h, gdbarch.c: Regenerate.
3006 * arch-utils.h (legacy_virtual_frame_pointer): Declare.
3007 * arch-utils.c: Include "gdb_assert.h".
3008 (legacy_virtual_frame_pointer): Define.
3009 * Makefile.in (arch-utils.o): Depends on gdb_assert.h.
3011 * tracepoint.c (encode_actions): Make frame_reg an int. Make
3012 frame_offset a LONGEST.
3013 * ax-gdb.c (gen_frame_args_address): Ditto.
3014 (gen_frame_locals_address): Ditto.
3015 * mn10300-tdep.c (mn10300_gdbarch_init): Initialize
3016 virtual_frame_pointer.
3017 (mn10300_virtual_frame_pointer): Make static. Update parameter
3018 list to match function signature.
3019 * config/mn10300/tm-mn10300.h (TARGET_VIRTUAL_FRAME_POINTER): Delete.
3023 * gdb-events.sh: Add architecture_changed event.
3024 * gdbarch.sh: Include gdb-event.h.
3025 (gdbarch_update_p): Notify UIs when architecture changes.
3026 * gdb-events.h: Regenerated.
3027 * gdb-events.c: Regenerated.
3028 * gdbarch.c: Regenerated.
3032 * regcache.c (legacy_write_register_gen): Don't 'optimize out'
3033 a write_register to a pseudo-reg. Target_store_pseudo_register
3034 needs to get called, because these regs may be computed and may
3039 * gdb-events.sh: Deal with event notifications with no
3044 * remote.c (read_frame): Correct off-by-one error in condition.
3048 * stabsread.c (read_type): Add support for const and volatile
3053 * core-regset.c (fetch_core_registers): Remove HAVE_GREGSET_T
3054 and HAVE_FPREGSET_T checks. Use gdb_gregset_t and gdb_fpregset_t.
3058 * defs.h (SLASH_STRING): If not defined, set
3059 to "/", regardless of _WIN32, __CYGWIN__, or
3064 * cli/cli-decode.h: Include "gdb_regex.h" instead of
3071 * config/i386/xm-go32.h: Include xm-i386.h.
3072 (HOST_BYTE_ORDER, HOST_LONG_DOUBLE_FORMAT): Remove definitions.
3076 The following changes avoid polluting global namespace with the
3077 `enable' and `disable' identifiers, because some platforms define
3078 in their system headers symbols with global scope that go by those
3081 * breakpoint.h (enum enable_state): Rename from `enum enable'.
3082 Also rename all the enum members to have the "bp_" prefix.
3083 (struct breakpoint): Rename the `enable' member to `enable_state'.
3084 (enum bpdisp): Rename all members to have the "disp_" prefix.
3086 * breakpoint.c: All users of `enum enable' and `enum bpdisp'
3088 (args_for_catchpoint_enable): Rename the `enable' member to
3089 `enable_p'. All users changed.
3091 * tracepoint.h (enum enable): Remove.
3092 (struct tracepoint): The member `enabled' is now `int enabled_p'.
3094 * tracepoint.c: All users of the `enabled' member changed.
3096 * printcmd.c (struct display): The `status' member is now an int.
3098 * memattr.h (struct mem_region): Rename the `status' member to
3100 (enum enable): Remove.
3102 * memattr.c: Change all users of the `status' member of struct
3103 mem_region to use `enabled_p' instead.
3105 * infcmd.c (run_stack_dummy): Use disp_del instead of del.
3107 * go32-nat.c: Remove the kludgey work-around for conflicts between
3108 <dos.h> and "breakpoint.h".
3112 * MAINTAINERS: Add myself to the write-after-approval list.
3113 * ser-tcp.c (tcp_open): Use `localhost' as default host if no
3118 * doublest.h (store_floating, floatformat_to_doublest): Make IN
3119 paramter a const void pointer.
3120 (floatformat_from_doublest): Make IN const, Make OUT a void
3122 * doublest.c (floatformat_to_doublest): Update.
3123 (floatformat_from_doublest): Update.
3124 (extract_floating): Update.
3128 * defs.h (HOST_FLOAT_FORMAT, HOST_DOUBLE_FORMAT)
3129 (HOST_FLOAT_FORMAT, HOST_DOUBLE_FORMAT)
3130 (HOST_LONG_DOUBLE_FORMAT, DOUBLEST)
3131 (floatformat_to_doublest, floatformat_from_doublest)
3132 (floatformat_is_negative, floatformat_is_nan)
3133 (floatformat_mantissa, store_floating)
3134 (extract_floating): Move declaration from here.
3135 * doublest.h: To here. New file.
3136 * utils.c (get_field, floatformat_to_doublest, put_field)
3137 (ldfrexp, floatformat_from_doublest, floatformat_is_negative)
3138 (floatformat_is_nan, floatformat_mantissa)
3139 (FLOATFORMAT_CHAR_BIT): Move from here.
3140 * doublest.c: To here. New file.
3141 * findvar.c (store_floating, extract_floating): Move from here.
3142 * doublest.c: To here.
3143 * Makefile.in (SFILES): Add doublest.c.
3144 (COMMON_OBS): Add doublest.o.
3145 (doublest.o): Specify dependencies.
3146 (doublest_h): Define.
3148 * config/m88k/tm-m88k.h: Include "doublest.h".
3149 * config/i960/tm-i960.h: Ditto.
3150 * config/i386/tm-symmetry.h: Ditto.
3151 * rs6000-tdep.c, valarith.c: Ditto.
3152 * valprint.c, stabsread.c, sh-tdep.c: Ditto.
3153 * ia64-tdep.c, i387-tdep.c, i386-tdep.c: Ditto.
3154 * values.c, arm-tdep.c, arm-linux-tdep.c: Ditto.
3155 * alpha-tdep.c, ax.h, expression.h: Ditto.
3156 * sh-tdep.c, parse.c, top.c, value.h: Ditto.
3158 * Makefile.in (arm-tdep.o): Add $(doublest_h).
3159 (i386-tdep.o, i387-tdep.o, ia64-tdep.o): Ditto.
3160 (rs6000-tdep.o, stabsread.o, valarith.o): Ditto.
3161 (values.o, valprint.o, arm-linux-tdep.o): Ditto.
3162 (alpha-tdep.o, ax_h, parse.o, top.o, value_h): Ditto.
3163 (parser_defs_h): Ditto.
3164 (expression_h): Add $(doublest_h) and $(symtab_h).
3168 * Makefile.in: Sort header definitions.
3169 (parser_defs_h, dis_asm_h, annotate_h, gdbthread_h): Define.
3170 Replace parser-defs.h with $(parser_defs_h). Replace $(dis-asm_h)
3171 and $(dis-asm.h) with $(dis_asm_h). Replace annotate.h with
3172 $(annotate_h). Replace target.h with $(target_h). Replace
3173 gdbthread.h with $(gdb_thread_h). Replace symfile.h with $(symfile_h).
3177 * config/i386/xm-i386.h: New file.
3178 * config/i386/xm-fbsd.h: Removed.
3179 * config/i386/xm-linux.h: Removed.
3180 * config/i386/fbsd.mh: Reorganize a bit.
3181 (XM_FILE): Set to xm-i386.h instead of xm-fbsd.h.
3182 * config/i386/linux.mh (XM_FILE): Set to xm-i386.h insread of
3187 * dwarf2read.c (dwarf2_build_psymtabs_hard): Doc fix.
3191 * configure.in: Only invoke AC_FUNC_SETPGRP if not cross-compiling.
3192 Check for SETPGRP_VOID separately if cross-compiling and ISO C
3193 headers are available.
3197 * config/i386/tm-i386sol2.h (STAB_REG_TO_REGNUM): Redefine to call
3198 i386_dwarf_reg_to_regnum.
3200 * i386-tdep.c (i386_register_convert_to_virtual): Replace
3201 assertion with a warning if we're asked to convert towards a
3202 non-floating-point type. Zero out the the buffer where the data
3203 is supposed to be stored in that case.
3207 * config/djgpp/djconfig.sh: Unset CDPATH.
3209 * go32-nat.c (get_cr3): Temporary disable support for page tables
3210 in UMBs, as it is incomplete.
3212 Support for stepping through longjmp in DJGPP programs:
3214 * config/i386/tm-go32.h (JB_ELEMENT_SIZE, JB_PC): New macros.
3215 (GET_LONGJMP_TARGET): Define to call get_longjmp_target.
3216 (get_longjmp_target): Add prototype.
3220 Fix some PID/TPID fallout for HP/UX.
3222 * infttrace.c (ptrace_wait): Match external declaration,
3223 and match target_post_wait declaration.
3227 * MAINTAINERS: Add Orjan Friberg as cris target maintainer.
3228 (cris): Set --enable-gdb-build-warnings flag to -w.
3233 * config/m68k/tm-m68k.h (TARGET_LONG_DOUBLE_FORMAT): Define.
3234 (TARGET_LONG_DOUBLE_BIT): Define.
3235 (REGISTER_VIRTUAL_SIZE): Return 12 for floating point registers.
3236 (MAX_REGISTER_VIRTUAL_SIZE): Increase to 12.
3237 (REGISTER_VIRTUAL_TYPE): Return builtin_type_long_double for
3238 floating point registers.
3239 (REGISTER_CONVERTIBLE, REGISTER_CONVERT_TO_VIRTUAL)
3240 (REGISTER_CONVERT_TO_RAW): Remove.
3241 * config/m68k/xm-linux.h (HOST_LONG_DOUBLE_FORMAT): Define.
3245 * thread.c, breakpoint.c: Include "gdb.h".
3246 * Makefile.in (gdb_h): Define.
3247 (HFILES_NO_SRCDIR): Add gdb.h.
3248 (mi-cmd-break.o, mi-main.o, thread.o)
3249 (breakpoint.o): Add dependency on $(gdb_h).
3251 * defs.h (enum gdb_rc, gdb_breakpoint_query)
3252 (gdb_breakpoint, gdb_thread_select)
3253 (gdb_list_thread_ids): Move declaration from here ...
3254 * gdb.h: To here. New file.
3258 * Makefile.in (SUBDIR_TUI_OBS): Add tui-out.o, tui-hooks.o.
3259 (SUBDIR_TUI_SRCS): Add tui-out.c tui-hooks.c
3261 (tui-out.o): Define dependencies.
3262 (tui-hooks.o): Likewise.
3266 * MAINTAINERS: Update e-mail address of active @cygnus.com
3267 maintainers to @redhat.com.
3271 * README (Known bugs): Delete section.
3272 (Kernel debugging): Delete section.
3273 (Languages other than C): Delete section.
3274 (Host/target specific installation notes) New section.
3278 * config/i386/tm-i386.h (STAB_REG_TO_REGNUM, SDB_REG_TO_REGNUM,
3279 DWARF_REG_TO_REGNUM, DWARF2_REG_TO_REGNUM): New defines.
3280 (i386_stab_reg_to_regnum, i386_dwarf_reg_to_regnum): New
3282 * config/i386/tm-fbsd.h, config/i386/tm-i386gnu.h,
3283 config/i386/tm-linux.h (STAB_REG_TO_REGNUM): Redefine to call
3284 i386_dwarf_reg_to_regnum.
3285 * i386-tdep.c (i386_stab_reg_to_regnum, i386_dwarf_reg_to_regnum):
3288 * i386-tdep.c: Include "gdb_assert.h"
3289 (i386_register_convert_to_virtual): Fix such that it can handle
3290 conversion to any floating-point type. Assert that we are dealing
3291 with a floating-point first.
3292 (i386_register_convert_to_raw): Assert that TYPE is a
3293 floating-point type with length 12.
3297 * configure.in: Added dependency of gdb on tcl/tk libraries.
3298 * Makefile.in: Likewise.
3299 * configure: Regenerated with the above using autoconf.
3303 * sh-tdep.c (sh_gdbarch_init): Use SH_DEFAULT_NUM_REGS instead of
3305 (SH_DEFAULT_NUM_REGS): Define.
3309 * go32-nat.c (read_memory_region): Make sure the segment limit was
3310 indeed set, to work around a Windows 2000 bug.
3314 * infptrace.c (child_xfer_memory): Add cast to CORE_ADDR.
3315 * infttrace.c (child_xfer_memory): Likewise.
3316 * symm-nat.c (child_xfer_memory): Likewise.
3317 * gdbserver/low-hppabsd.c (read_inferior_memory): Likewise.
3318 (write_inferior_memory): Likewise.
3319 * gdbserver/low-linux.c (read_inferior_memory): Likewise.
3320 (write_inferior_memory): Likewise.
3321 * gdbserver/low-lynx.c (read_inferior_memory): Likewise.
3322 (write_inferior_memory): Likewise.
3323 * gdbserver/low-nbsd.c (read_inferior_memory): Likewise.
3324 (write_inferior_memory): Likewise.
3325 * gdbserver/low-sparc.c (read_inferior_memory): Likewise.
3326 (write_inferior_memory): Likewise.
3327 * gdbserver/low-sun3.c (read_inferior_memory): Likewise.
3328 (write_inferior_memory): Likewise.
3332 * README: Mention how to make gdb.pdf.
3338 * MAINTAINERS (Stephen P. Smith): Added to write after approval
3343 * mips-tdep.c (mips_push_arguments): Add comment explaining
3344 problem with LE o32 GCC.
3348 * config/powerpc/aix.mh (MH_LDFLAGS): Don't set these, the Gnu linker
3349 doesn't understand them.
3353 * memattr.c (mem_info_command): Reformat output to look more like
3354 'info break' output.
3355 (_initialize_mem): Improve help.
3359 * configure.in (AC_CHECK_FUNCS): Add setpggrp.
3360 (AC_FUNC_SETPGRP): Add.
3361 * aclocal.m4, configure, config.in: Regenerated.
3362 * inflow.c (gdb_setpgid): Get rid of NEED_POSIX_SETPGID and
3363 SETPGRP_ARGS. Always use setpgid if it is available, fall back on
3364 setpgrp if it isn't. Use SETPGRP_VOID (defined by autoconf) to
3365 distinguish between the two setpgrp flavours.
3366 * config/xm-sysv4.h, config/arm/xm-linux.h,
3367 config/i386/xm-i386aix.h, config/i386/xm-sco.h,
3368 config/i386/xm-linux.h, config/i386/xm-ptx.h,
3369 config/m68k/xm-linux.h, config/powerpc/xm-linux.h,
3370 config/sparc/xm-linux.h, config/sparc/xm-sun4sol2.h,
3371 config/ia64/xm-linux.h (NEED_POSIX_SETPGID): Remove.
3372 * config/rs6000/xm-rs6000.h (SETPGRP_ARGS): Remove.
3376 * go32-nat.c (read_memory_region): Set the granularity bit of the
3377 allocated segment according to its size, and adjust the limit to
3378 be page-aligned if the segment is page-granular.
3380 * (get_cr3, get_pde, get_pte, display_ptable_entry, go32_pde)
3381 (display_page_table, go32_pte, go32_pte_for_address): New functions.
3382 (_initialize_go32_nat): Initialize and document them.
3386 * i386gnu-nat.c: Include "i387-nat.h".
3387 (struct env387): Removed.
3388 (reg_offset): Fix comment.
3389 (fetch_fpregs): Use FCTRL_REGNUM and FOP_REGNUM instead of
3390 FIRST_FPU_CONTROL_REGNUM and LAST_FPU_CONTROL_REGNUM. Rewrite to
3391 use i387_supply_fsave.
3392 (gnu_fetch_registers): Remove spurious whitespace.
3393 (convert_to_env387): Remove.
3394 (store_fpregs): Add argument regno. Use i387_fill_fsave instead
3395 of convert_to_env387.
3396 (gnu_store_registers): Remove spurious whitespace. Pass REGNO to
3398 * config/i386/i386gnu.mt (TDEPFILES): Add i387-tdep.o.
3399 * config/i386/i386gnu.mh (XDEPFILES): Remove i387-tdep.o.
3400 (NATDEPFILES): Add i387-nat.o.
3404 * Makefile.in (ALLDEPFILES): Add m68hc11-tdep.c.
3405 (m68hc11-tdep.o): Define dependencies.
3409 * m68hc11-tdep.c (m68hc11_gdbarch_init): Define int at 16-bits.
3413 * utils.c (init_page_info): Use tui_get_command_dimension.
3414 * printcmd.c (disassemble_command): Simplify tui specific code,
3415 use tui_is_window_visible, tui_show_assembly.
3419 * i386bsd-nat.c: Do not include <sys/sysctl.h>.
3420 (_initialize_i386bsd_nat) [KERN_PS_STRINGS]: Move FreeBSD-specific
3422 * i386fbsd-nat.c: ... here. New file.
3423 * config/i386/fbsd.mh (NATDEPFILES): Add i386-fbsd.o.
3424 * config/i386/nm-fbsd.h (CHILD_RESUME): Define.
3425 * Makefile.in (ALLDEPFILES): Add i386fbsd-nat.c.
3426 (i386fbsd-nat.o): Add dependencies.
3430 * signals.c: New file.
3431 * Makefile.in: Add signals.o.
3432 * target.c (struct signals, target_signal_to_name)
3433 (target_signal_from_name, target_signal_from_host)
3434 (do_target_signal_to_host, target_signal_to_host_p)
3435 (target_signal_to_host, target_signal_from_command): Move to
3437 (initialize_targets): Move check of struct signals to...
3438 * signals.c (_initialize_signals): Here.
3442 * MAINTAINERS: Add Michael Chastain as C++ testsuite maintainer.
3447 * configure.tgt (i*86-*-pe*): New target.
3452 * infttrace.c (child_thread_alive): Fix gdb_tid typo.
3453 * somsolib.c (no_shared_libraries): Provide stub.
3454 * xcoffsolib.c (no_shared_libraries): Provide stub.
3458 * Makefile.in (COMMON_OBS): Remove tui-file.o.
3459 (SUBDIR_TUI_OBS): Add it here.
3460 (SUBDIR_TUI_SRCS): Move tui-file.c and tui-file.h here.
3461 (main.o): Remove dependency with tui-file.h.
3465 * Makefile.in (tui-file.o): Update dependencies.
3469 * top.c (catch_errors): Convert PTR to void * in parameters list.
3470 (quit_cover): Ditto.
3474 * source.c (find_source_lines): Remove tui test, must be replaced
3475 by appropriate warning hook.
3476 (print_source_lines): Remove tui hacks, must be replaced by cli.
3477 (forward_search_command): Remove tui hacks, can be replaced by
3478 appropriate calls to identify_source_line when tui scrolls.
3479 (reverse_search_command): Likewise.
3483 * remote.c (init_remote_ops, init_remote_cisco_ops,
3484 init_remote_async_ops): Set to_pid_to_str and
3485 to_extra_thread_info correctly and in the same order as declared
3490 * remote.c: Revert below. Included more than intended.
3494 * remote.c (init_remote_ops, init_remote_cisco_ops,
3495 init_remote_async_ops): Set to_pid_to_str and
3496 to_extra_thread_info correctly and in the same order as declared
3501 * findvar.c (read_var_value): Apply value_as_pointer() to
3502 addresses retrieved from the target for LOC_BASEREG and
3503 LOC_BASEREG_ARG variables.
3507 * NEWS: New target CRIS.
3511 * top.c (show_commands): Remove extern decl of history_get, it's
3512 already in readline/history.h.
3516 * top.c (is_complete_command, init_cmd_lists, init_cli_cmds,
3517 execute_user_command, do_setshow_command, get_prompt, init_proc,
3518 serial_log_command): Remove extern declarations. Include
3519 cli/cli-cmds.h, cli/cli-script.h, cli/cli-setshow.h, serial.h.
3520 * gdbcmd.h (execute_user_command): Remove declaration, it's already
3521 in cli/cli-script.h.
3522 * command.h (do_setshow_command): Remove declaration, it's already
3523 in cli/cli-setshow.h.
3524 * infrun.c: Include "cli/cli-script.h" for execute_user_command.
3525 * Makefile.in (infrun.o): Update dependencies.
3527 * cli/cli-setshow.h: Add comment for do_setshow_command.
3531 * cli/cli-cmds.c (shell_escape) [GLOBAL_CURDIR]: Condition the
3532 call to chdir on this symbol rather than on __DJGPP__.
3533 (CANT_FORK) [__MSDOS__]: Move from here...
3534 * defs.h (CANT_FORK) [__MSDOS__]: ...to here.
3535 (GLOBAL_CURDIR) [__MSDOS__]: Define.
3539 * configure.tgt: Recognise the CRIS architecture.
3540 * config/cris/cris.mt: New file for CRIS target.
3541 * cris-tdep.c: New file for CRIS target.
3545 * top.c (quit_cover, float_handler): Move definition up before use.
3546 (gdb_init): Move to end of file, to avoid calls to not yet defined
3552 * serial.h (SERIAL_ASYNC): Delete.
3553 (DEPRECATED_SERIAL_FD): Delete.
3554 (SERIAL_DEBUG): Delete.
3555 (SERIAL_DEBUG_P): Delete.
3556 (SERIAL_DRAIN_OUTPUT): Delete.
3557 (SERIAL_FLUSH_OUTPUT): Delete.
3558 (SERIAL_FLUSH_INPUT): Delete.
3559 (SERIAL_SEND_BREAK): Delete.
3560 (SERIAL_RAW): Delete.
3561 (SERIAL_GET_TTY_STATE): Delete.
3562 (SERIAL_SET_TTY_STATE): Delete.
3563 (SERIAL_PRINT_TTY_STATE): Delete.
3564 (SERIAL_NOFLUSH_SET_TTY_STATE): Delete.
3565 (SERIAL_SETBAUDRATE): Delete.
3566 (SERIAL_SETSTOPBITS): Delete.
3567 (SERIAL_CAN_ASYNC_P): Delete.
3568 (SERIAL_IS_ASYNC_P): Delete.
3569 (SERIAL_UN_FDOPEN): Delete.
3570 (SERIAL_READCHAR): Delete.
3571 (SERIAL_CLOSE): Delete.
3572 (SERIAL_FDOPEN): Delete.
3573 (SERIAL_OPEN): Delete.
3574 * ser-unix.c: Update.
3575 * sparclet-rom.c: Update.
3576 * remote-bug.c: Update.
3579 * nindy-share/ttyflush.c: Update.
3580 * nindy-share/Onindy.c: Update.
3583 * remote-nindy.c: Update.
3585 * sparcl-tdep.c: Update.
3586 * sh3-rom.c: Update.
3588 * remote-utils.c: Update.
3589 * remote-st.c: Update.
3590 * remote-sds.c: Update.
3591 * remote-rdp.c: Update.
3592 * remote-os9k.c: Update.
3593 * remote-nrom.c: Update.
3594 * remote-mips.c: Update.
3595 * remote-es.c: Update.
3596 * remote-e7000.c: Update.
3597 * remote-array.c: Update.
3599 * nindy-share/nindy.c: Update.
3600 * monitor.c: Update.
3604 * mn10200-tdep.c: Replace value_ptr with ``struct value *''.
3605 * mcore-tdep.c: Ditto.
3606 * sparc-tdep.c: Ditto.
3608 * rs6000-tdep.c: Ditto.
3609 * ppc-linux-tdep.c: Ditto.
3610 * m68hc11-tdep.c: Ditto.
3611 * ia64-tdep.c: Ditto.
3612 * i386-tdep.c: Ditto.
3613 * arm-linux-tdep.c: Ditto.
3614 * hppa-tdep.c: Ditto.
3615 * h8500-tdep.c: Ditto.
3616 * fr30-tdep.c: Ditto.
3617 * arm-tdep.c: Ditto.
3618 * alpha-tdep.c: Ditto.
3619 * d30v-tdep.c: Ditto.
3620 * d10v-tdep.c: Ditto.
3621 * m32r-tdep.c: Ditto.
3622 * mips-tdep.c: Ditto.
3623 * v850-tdep.c: Ditto.
3627 * top.c (readline_line_completion_function, noop_completer): Move
3629 * completer.c (readline_line_completion_function, noop_completer):
3631 * gdbcmd.h (readline_line_completion_function, noop_completer):
3632 Move declarations from here...
3633 * completer.h (readline_line_completion_function, noop_completer):
3635 * corefile.c: Include completer.h.
3638 * Makefile.in: Update dependencies.
3642 * go32-nat.c (go32_create_inferior): Support command lines longer
3643 than 126 characters.
3647 * NEWS: New target 68HC11/68HC12.
3651 * utils.c (query): Remove tui hacks; tui must use the query_hook.
3652 * top.c (command_loop): Remove tui insert_mode hacks; don't call
3653 tuiCleanUp because this must be made with atexit by tui.
3654 * symfile.c (symbol_file_command): Remove call to TUIDO
3655 * stack.c (show_and_print_stack_frame_stub): Remove tui check;
3656 not necessary when using the selected frame hooks.
3657 (print_stack_frame_stub): Likewise.
3658 (print_frame_info_base): Likewise.
3659 (print_frame_info): Likewise.
3660 (up_silently_command): Likewise.
3661 (down_silently_command): Likewise.
3662 (show_stack_frame): Likewise for TUIDO.
3663 (select_frame): Likewise.
3664 (select_and_print_frame): Likewise.
3665 (stack_publish_stopped_with_no_frame): Remove.
3666 (select_and_maybe_print_frame): Remove.
3667 * main.c (captured_main): Remove tui_fileopen and tuiInit; tui
3668 must use the initialize ui hook.
3669 * infrun.c (normal_stop): Remove call to TUIDO; tui must use the
3670 selected frame hooks.
3671 * event-top.c (command_handler): Remove tui insert_mode hack.
3672 * defs.h: Remove TUIDO; Only include tui.h.
3673 * breakpoint.c (mention): Remove calls to TUIDO.
3674 (delete_breakpoint): Remove tui hacks; tui must install
3675 the breakpoint hooks.
3679 * config/i386/xm-linux.h (KERNEL_U_ADDR): Move from here...
3680 * config/i386/nm-linux.h: ...to here. Change comments about user
3683 * config/i386/xm-linux.h (HAVE_TERMIOS): Really remove.
3685 * Makefile.in (ALLDEPFILES): Add i386bsd-nat.c and i386bsd-tdep.c
3686 (i386bsd-tdep.o, i386bsd-nat.o): New targets.
3690 * remote-e7000.c (fetch_regs_from_dump): If register set is null,
3691 generate an internal error.
3692 (e7000_fetch_registers): Initialize variable 'wanted'.
3693 (e7000_wait): Initialize variable 'wanted_nopc'.
3694 (e7000_store_register): Fix sprintf compiler warnings.
3695 (sub2_from_pc): Ditto.
3696 (e7000_open): Close the descriptor, not the name.
3697 (e7000_load): Fix compiler warnings.
3698 (sub2_from_pc): Ditto.
3699 * Makefile.in (remote-e7000.o): Can now compile with -Werror.
3703 * i386bsd-nat.c: Include <signal.h>, <stddef.h> and
3705 (store_inferior_registers): Wrap long line.
3706 (i386bsd_dr_get_status): Fix typo in comment.
3707 (_initialize_i386bsd_nat): New function. * i386bsd-tdep.c: New
3708 file. * config/i386/tm-fbsd.h (IN_SIGTRAMP): New define.
3709 (i386bsd_in_sigtramp): New prototype.
3710 (SIGTRAMP_START, SIGTRAMP_END): Redefine in terms...
3711 (i386bsd_sigtramp_start, i386bsd_sigtramp_end): ...these new
3712 (external) variables.
3713 (SIGCONTEXT_PC_OFFSET): Removed.
3714 (FRAME_SAVED_PC): New define.
3715 (i386bsd_frame_saved_pc): New function. * config/i386/fbsd.mt
3716 (TDEPFILES): Add i386bsd-tdep.o.
3720 * mips-linux-tdep.c (_initialize_mips_linux_tdep): Use ISO C
3725 * lin-lwp.c (lin_lwp_wait): Avoid check for resumed LWPs if there
3726 are no registered LWPs yet.
3730 * config/i386/nm-linux.h (CANNOT_FETCH_REGISTER): Call the right
3732 (CANNOT_STORE_REGISTER): Likewise.
3736 * remote-rdp.c: Include "serial.h"
3740 * gdbserver/remote-utils.c (remote_open): Set VMIN to 1
3741 in HAVE_TERMIO/HAVE_TERMIOS cases.
3745 * lin-lwp.c (stop_wait_callback): Add support for flushing
3746 signals. Use that in favour of the old code to get rid of
3747 superfluous SIGINTs.
3748 (lin_lwp_wait): Use the new support in stop_wait_callback to
3749 flush all but one SIGINT.
3751 * i386-tdep.c (i386_extract_return_value): Undo 2001-07-11 changes
3753 (i386_store_return_value): Improve comments about storing
3754 floating-point return values.
3756 * config/arm/xm-linux.h, config/i386/xm-linux.h,
3757 config/m68k/xm-linux.h, config/powerpc/xm-linux.h,
3758 config/sparc/xm-linux.h, config/ia64/xm-linux.h (HAVE_TERMIOS):
3759 Removed. Taken care of by autoconf and terminal.h.
3763 * mips-tdep.c (mips_type_needs_double_align): New function.
3764 (mips_push_arguments): Align o32 structs to even argument
3765 registers if necessary.
3769 * config/djgpp/fnchange.lst: Add entries for
3770 mips-linux-nat.c and mips-linux-tdep.c.
3774 * config/powerpc/xm-linux.h: Fix corrupted file.
3776 * configure.in: Add check for sigsetjmp.
3777 * config/m68k/xm-linux.h (HAVE_SIGSETJMP): Removed.
3778 * config/xm-sysv4.h (HAVE_SIGSETJMP): Removed.
3779 * configure, config.in: Regenerated.
3783 * config/sh/tm-sh.h (struct gdbarch_tdep): Add
3784 FLOAT_ARGLAST_REGNUM, RETURN_REGNUM, ARG0_REGNUM, ARGLAST_REGNUM,
3787 * sh-tdep.c (sh_skip_prologue_hard_way): Rename from
3788 skip_prologue_hard_way().
3789 (skip_prologue_hard_way): Make it a function pointer.
3790 (sh_print_register): Use function pointer do_pseudo_register,
3791 instead of sh_do_pseudo_register.
3792 (sh_do_registers_info): Ditto.
3793 (sh_gdbarch_init): Initialize do_pseudo_register.
3794 (IS_MOV_TO_R14): Rename from IS_MOV_R14.
3795 (skip_prologue_hard_way): Update.
3796 (sh_gdbarch_init): Move setting of frame_chain,
3797 get_saved_register, init_extra_frame_info, push_arguments,
3798 extract_return_value, pop_frame, store_struct_return,
3799 extract_struct_value_address, use_struct_convention,
3800 init_extra_frame_info to before target specific settings.
3801 (sh_gdbarch_init): Initialize new tdep fields
3802 FLOAT_ARGLAST_REGNUM, RETURN_REGNUM, ARG0_REGNUM, ARGLAST_REGNUM,
3804 (sh_push_arguments): Use new gdbarch_tdep fields
3805 {ARG0,ARGLAST}_REGNUM.
3806 (sh_saved_pc_after_call, sh_nofp_frame_init_saved_regs,
3807 sh_init_extra_frame_info, sh_push_return_address,
3808 sh_generic_show_regs, sh3_show_regs, sh3e_show_regs,
3809 sh3_dsp_show_regs, sh4_show_regs, sh_dsp_show_regs): Update to use
3810 gdbarch_tdep->PR_REGNUM.
3811 (dr_reg_base_num, fv_reg_base_num): Move to earlier in the file.
3815 * config/mips/tm-linux.h: Include "tm-linux.h" instead of copying
3816 from it. Move definitions of REALTIME_LO and REALTIME_HI above
3821 * MAINTAINERS: List myself for MIPS/Linux
3826 * gdbserver/remote-utils.c (remote_open): Only
3827 check for F_SETOWN if we had F_SETFL and FASYNC.
3833 * config/m68k/linux.mh: Remove core-regset.o.
3834 * m68klinux-nat.c: Fix comment.
3835 (supply_gregset): Change argument to elf_gregset_t *.
3836 (supply_fpregset): Change argument to elf_fpregset_t *.
3837 (fetch_core_registers): New function.
3838 (linux_elf_core_fns): Define.
3839 (_initialize_m68k_linux_nat): New function.
3843 * configure.tgt: Mark d10v as pure multi-arch.
3844 * config/d10v/tm-d10v.h: Delete file.
3845 * config/d10v/d10v.mt (TM_FILE): Delete.
3849 * serial.h (typedef serial_t): Delete. Replace all references to
3850 serial_t with `struct serial *'.
3852 * nindy-share/ttyflush.c: Update.
3853 * nindy-share/ttyflush.c: Update.
3854 * nindy-share/Onindy.c: Update.
3855 * nindy-share/nindy.c: Update.
3856 * remote-rdp.c: Update.
3857 * remote-sds.c: Update.
3858 * remote-st.c: Update.
3859 * remote-nindy.c: Update.
3860 * remote-mips.c: Update.
3861 * remote-e7000.c: Update.
3862 * remote-os9k.c: Update.
3863 * remote-nrom.c: Update.
3864 * remote-es.c: Update.
3865 * remote-array.c: Update.
3867 * mon960-rom.c: Update.
3870 * ser-e7kpc.c: Update.
3871 * sparclet-rom.c: Update.
3873 * ser-tcp.c: Update.
3874 * ser-go32.c: Update.
3875 * sparcl-tdep.c: Update.
3876 * w89k-rom.c: Update.
3878 * sh3-rom.c: Update.
3880 * ser-pipe.c: Update.
3881 * ser-unix.c: Update.
3882 * ser-unix.h: Update.
3889 * gdbserver/remote-utils.c (remote_open): Set gdbserver as "owner"
3891 (input_interrupt): Don't block on read, in case we got redundant
3892 SIGIO. Don't gripe about redundant SIGIO.
3893 * gdbserver/low-hppabsd.c (mywait): Use waitpid(). Enable SIGIO
3894 handler while waiting.
3895 * gdbserver/low-linux.c (mywait): Likewise.
3896 * gdbserver/low-nbsd.c (mywait): Likewise.
3897 * gdbserver/low-sparc.c (mywait): Likewise.
3901 * infrun.c (print_stop_reason): Add missing uiout field
3902 "reason" for SIGNAL_RECEIVED case.
3906 * config/alpha/nm-linux.h (TARGET_ELF64, PSIGNAL_IN_SIGNAL_H):
3907 Remove unused macro's.
3909 * config/powerpc/nm-linux.h (NO_SYS_REG_H): Remove, it's no longer
3914 * go32-nat.c (info_dos_cmdlist): New variable.
3915 (go32_info_dos_command): New function.
3916 (_initialize_go32_nat): Convert all DOS-specific commands into
3917 subcommands of "info dos". Suggested by Andrew Cagney
3922 * config/nm-linux.h: Fix comments.
3924 * thread-db.c (enable_thread_event_reporting): Correct warning
3925 message about getting thread death breakpoint.
3928 * i386-tdep.c (i386_extract_return_value): "Fix" comment.
3929 (i386_store_return_value): Frob FPU status and tag word to make
3930 sure the return value is the only value on the FPU stack.
3932 * config/tm-linux.h: Do not include <signal.h>. Instead provide
3933 reasonable defaults for REALTIME_LO and REALTIME_HI if they're not
3935 * config/nm-linux.h: Include <signal.h>.
3936 [__SIGRTMIN] (REALTIME_LO, REALTIME_HI): Define to __SIGRTMIN and
3937 (__SIGRTMAX + 1) respectively.
3941 * mcore-rom.c: Include "serial.h".
3942 * Makefile.in (mcore-rom.o): Depends on "serial.h".
3946 * Makefile.in (remote-bug.o): Depends on serial.h.
3947 * remote-bug.c: Include "serial.h".
3948 * MAINTAINERS: Mark m88k target as buildable.
3953 Clean up the D10V port so that GDB and the target program no
3954 longer disagree on how big pointers are.
3955 * findvar.c (value_from_register): Remove special case code for D10V.
3956 * printcmd.c (print_frame_args): Same.
3957 * valops.c (value_at, value_fetch_lazy): Same.
3958 * values.c (unpack_long): Same.
3959 * gdbarch.sh: Changes to effect the following:
3960 * gdbarch.h (GDB_TARGET_IS_D10V, D10V_MAKE_DADDR,
3961 gdbarch_d10v_make_daddr_ftype, gdbarch_d10v_make_daddr,
3962 set_gdbarch_d10v_make_daddr, D10V_MAKE_IADDR,
3963 gdbarch_d10v_make_iaddr_ftype, gdbarch_d10v_make_iaddr,
3964 set_gdbarch_d10v_make_iaddr, D10V_DADDR_P,
3965 gdbarch_d10v_daddr_p_ftype, gdbarch_d10v_daddr_p,
3966 set_gdbarch_d10v_daddr_p, D10V_IADDR_P,
3967 gdbarch_d10v_iaddr_p_ftype, gdbarch_d10v_iaddr_p,
3968 set_gdbarch_d10v_iaddr_p, D10V_CONVERT_DADDR_TO_RAW,
3969 gdbarch_d10v_convert_daddr_to_raw_ftype,
3970 gdbarch_d10v_convert_daddr_to_raw,
3971 set_gdbarch_d10v_convert_daddr_to_raw, D10V_CONVERT_IADDR_TO_RAW,
3972 gdbarch_d10v_convert_iaddr_to_raw_ftype,
3973 gdbarch_d10v_convert_iaddr_to_raw,
3974 set_gdbarch_d10v_convert_iaddr_to_raw): Delete declarations.
3975 * gdbarch.c: Delete the corresponding definitions.
3976 (struct gdbarch): Delete members d10v_make_daddr,
3977 d10v_make_iaddr, d10v_daddr_p, d10v_iaddr_p,
3978 d10v_convert_daddr_to_raw, and d10v_convert_iaddr_to_raw.
3979 (startup_gdbarch): Remove initializers for the above.
3980 (verify_gdbarch, gdbarch_dump): Don't verify or dump them any
3982 * d10v-tdep.c (d10v_register_virtual_type): Rather that
3983 claiming the stack pointer and PC are 32 bits long (which they
3984 aren't), say that the stack pointer is an int16_t, and the
3985 program counter is a function pointer. This allows the rest
3986 of GDB to make the appropriate conversions between the code
3987 pointer format and real addresses.
3988 (d10v_register_convertible, d10v_register_convert_to_virtual,
3989 d10v_register_convert_to_raw): Delete function; no registers
3990 are convertible now, so we use
3991 generic_register_convertible_not instead.
3992 (d10v_address_to_pointer, d10v_pointer_to_address): New gdbarch
3994 (d10v_push_arguments, d10v_extract_return_value): Remove special
3995 cases for code and data pointers.
3996 (d10v_gdbarch_init): Set gdbarch_ptr_bit to 16, so that GDB and
3997 the target agree on how large pointers are. Say that addresses
3998 are 32 bits long. Register the address_to_pointer and
3999 pointer_to_address conversion functions. Since no registers are
4000 convertible now, register generic_register_convertible_not as the
4001 gdbarch_register_convertible method instead of
4002 d10v_register_convertible. Remove registrations for
4003 d10v_register_convert_to_virtual,
4004 d10v_register_convert_to_raw, gdbarch_d10v_make_daddr,
4005 gdbarch_d10v_make_iaddr, gdbarch_d10v_daddr_p,
4006 gdbarch_d10v_iaddr_p, gdbarch_d10v_convert_daddr_to_raw, and
4007 gdbarch_d10v_convert_iaddr_to_raw.
4009 * printcmd.c (print_scalar_formatted): If we are printing an
4010 address, remember that TARGET_ADDR_BIT is not always equal to
4013 * valops.c (value_cast): When casting a pointer to an integer,
4014 don't convert it to an address.
4018 * remote-utils.h (struct serial): Declare as opaque. Remove
4019 include of "serial.h".
4020 * Makefile.in (remote_utils_h): Update.
4022 * monitor.h (struct serial): Declare as opaque. Remove include of
4024 (struct monitor_ops): Replace serial_t with `struct serial *'.
4025 * monitor.c (monitor_desc): Ditto.
4029 * mips-linux-tdep.c: New file.
4030 * mips-linux-nat.c: New file.
4031 * config/mips/linux.mh: New file.
4032 * config/mips/linux.mt: New file.
4033 * config/mips/xm-linux.h: New file.
4034 * config/mips/nm-linux.h: New file.
4035 * config/mips/tm-linux.h: New file.
4036 * configure.host: Recognize mips*-*-linux*.
4037 * configure.tgt: Likewise.
4038 * NEWS: Mention mips*-*-linux* port.
4042 * serial.h (struct serial): Rename `struct _serial_t'.
4043 * serial.c (XMALLOC): Define.
4044 (serial_open): Update. Use XMALLOC.
4045 (serial_fdopen): Ditto.
4049 * gdbtypes.h (builtin_type_void_data_ptr): Rename
4051 * gdbtypes.c (builtin_type_void_data_ptr): Update.
4052 (build_gdbtypes): Update.
4053 (_initialize_gdbtypes): Update.
4054 * values.c (value_as_pointer): Update.
4055 * utils.c (host_pointer_to_address): Update.
4056 (address_to_host_pointer): Update.
4060 * remote-udi.c (udi_wait): Make type, instead of name, of first
4065 * ser-mac.c: Make obsolete.
4066 * Makefile.in (ser-mac.o): Ditto.
4070 * go32-nat.c (go32_get_windows_version, print_mem, go32_sysinfo)
4071 (read_memory_region, get_descriptor, display_descriptor)
4072 (go32_sldt, go32_sgdt, go32_sidt): New functions.
4073 (top-level): Include ctype.h, utsname.h, dos.h, and go32.h. Ifdef
4074 away `disable' from dos.h, since breakpoint.h defines an enum
4075 member of the same name, and GCC 2.7.2 barfs.
4076 (_initialize_go32_nat): Provide new commands dos-sysinfo, dos-ldt,
4077 dos-gdt, and dos-idt, all of them in the "info" class
4081 * procfs.c (create_procinfo): Allocate space for saved_entryset
4083 (destroy_one_procinfo): Free space allocated to saved_entryset
4088 * TODO (5.1): Update.
4092 * symtab.c (main_name): New function.
4093 (set_main_name): New function.
4094 * symtab.h: Declare.
4098 * dbxread.c (process_one_symbol): Handle the N_MAIN stab by
4100 * blockframe.c (inside_main_func): Use main_name instead of
4102 * symtab.c (find_main_psymtab): Ditto.
4103 * source.c (select_source_symtab): Ditto.
4104 * nlmread.c (nlm_symfile_read): Ditto.
4105 * rs6000-tdep.c (skip_prologue): Ditto.
4109 * TODO: Convert most items into PRs.
4113 * lin-lwp.c (status_to_str): New function.
4114 (lin_lwp_wait): Use it to print debug messages where appropriate.
4118 * i387-tdep.c (print_i387_value): Fix pointer glitch.
4122 * lin-lwp.c (count_events_callback): Fix formatting. Turn check
4123 commented with "paranoia" into gdb_assert.
4124 (select_event_lwp_callback): Likewise.
4125 (cancel_breakpoints_callback): Bail out early if LP is the event
4126 LWP. Add comment about backup up breakpoints. Fix formatting and
4128 (select_event_lwp): Make solely repsonsible for switching event
4129 LWP. Fix formatting and remove bogus "ERROR" debug message.
4130 Don't backup breakpoints from here.
4131 (lin_lwp_wait): Don't touch LP->status, let select_event_lwp
4132 handle that. Only call select_event_lwp if we're not waiting for
4133 a specific LWP, i.e. when PID == -1. Backup breakpoints from here.
4137 * procfs.c (procfs_resume): Silence noisy warning.
4141 * lin-lwp.c: Prevent thread starvation by using a monte carlo
4142 method to choose which of several event threads to handle next.
4144 (stop_wait_callback): Defer pushback of breakpoint events until
4145 later; add SIGTRAP events to the queue of unhandled events.
4146 Keep calling waitpid until SIGSTOP retrieved. If more than one
4147 non-SIGSTOP event is retrieved, push them back onto the process
4149 (count_events_callback, select_singlestep_lwp_callback,
4150 select_event_lwp_callback, cancel_breakpoints_callback,
4151 select_event_lwp): New functions. Implement monte carlo method
4152 for selecting which of several SIGTRAP threads to handle next.
4153 Push back the breakpoint event for all threads other than the
4155 (lin_lwp_wait): Call select_event_lwp to decide which of several
4156 sigtrapped lwps to handle next.
4157 (resume_callback): Disable code that attempts to handle
4158 step_resume breakpoints. Let core gdb handle this.
4162 * gdbtypes.h (builtin_type_void_func_ptr): New builtin type.
4163 * gdbtypes.c (builtin_type_void_func_ptr): Define the variable.
4164 (build_gdbtypes): Initialize it.
4165 (_initialize_gdbtypes): Swap it.
4169 * mips-tdep.c (mips32_op): Correct offset.
4170 (itype_op): Likewise.
4171 (itype_rs): Fix formatting.
4172 (itype_immediate): Fix formatting.
4173 (jtype_op): Correct offset.
4174 (jtype_target): Fix formatting.
4175 (rtype_op): Correct offset.
4176 (rtype_rs): Fix formatting.
4177 (rtype_rt): Likewise.
4178 (rtype_rd): Likewise.
4179 (rtype_shamt): Likewise.
4180 (rtype_funct): Likewise.
4182 (mips32_next_pc): Fix formatting and comments. Recognize
4183 coprocessor 1 branches. Check the correct field for BLT family
4184 branches. Use itype_rt instead of itype_rs for the second register
4185 of a BNE or BNEL branch. Move (unreachable) default case.
4189 * ui-out.h (struct ui_out_impl): Add field is_mi_like_p.
4190 (ui_out_is_mi_like_p): Declare.
4191 * ui-out.c (ui_out_is_mi_like_p): Define.
4192 (default_ui_out_impl): Initialize is_mi_like_p to zero.
4193 * cli-out.c (cli_ui_out_impl): Ditto.
4194 * breakpoint.c (print_it_typical): Use ui_out_is_mi_like_p.
4195 (watchpoint_check, print_one_breakpoint, mention): Ditto.
4196 * infrun.c (print_stop_reason, normal_stop): Ditto.
4200 * mips-tdep.c (mips_software_single_step): New function.
4201 * config/mips/tm-mips.h: Add prototype for
4202 mips_software_single_step.
4206 * ppc-linux-nat.c (supply_gregset): Use elf_greg_t instead
4208 (fill_gregset): Likewise.
4212 * objfiles.c (open_mapped_file): Use lbasename instead of
4217 * d10v-tdep.c (d10v_frame_chain, d10v_frame_init_saved_regs,
4218 show_regs, d10v_read_pc, d10v_write_pc, d10v_read_sp,
4219 d10v_write_sp, d10v_write_fp, d10v_read_fp,
4220 d10v_push_return_address): Call the functions d10v_make_daddr,
4221 d10v_make_iaddr, d10v_convert_iaddr_to_raw, and
4222 d10v_convert_daddr_to_raw, not the global macros D10V_MAKE_DADDR,
4223 D10V_MAKE_IADDR, D10V_CONVERT_IADDR_TO_RAW, and
4224 D10V_CONVERT_DADDR_TO_RAW.
4226 * dwarf2read (dwarf2_build_psymtabs_hard): Doc fix.
4230 * config/i386/xm-go32.h (HOST_I386): Removed.
4231 * config/i386/xm-linux.h (HOST_I386): Removed.
4235 * i387-tdep.c (print_i387_value): Add extra space after final full
4240 * TODO (5.1): Update. Doco changes committed.
4244 * config/arm/tm-arm.h: Include "floatformat.h".
4248 * i387-tdep.c: Include "gdb_assert.h".
4249 (print_i387_value): Use extract_floating to extract the FP value
4250 from a zero padded local buffer.
4254 * TODO: Delete all thread items. The thread code was overhauled.
4258 * memattr.c (create_mem_region): Move n to next memory region,
4259 to avoid infinite loop.
4261 * memattr.h: Add copyright statement.
4266 * dwarf2read.c (struct partial_die_info): New member: has_pc_info.
4267 (read_partial_die): Delete fourth argument; we return this info in
4268 the struct partial_die_info object itself now.
4269 (dwarf2_build_psymtabs_hard, scan_partial_symbols): Use the
4270 has_pc_info field of the partial die struct, rather than passing a
4271 variable by reference to read_partial_die.
4273 * dwarf2read.c (dwarf2_build_psymtabs_hard): Remove extraneous
4274 code in loop condition.
4278 * thread_db (find_new_threads_callback, thread_db_thread_alive,
4279 attach_thread): Update comments.
4283 * thread-db.c (attach_thread): Check for TD_THR_ZOMBIE in addition
4284 to TD_THR_UNKNOWN when looking for defunct zombie threads.
4285 (thread_db_thread_alive): Ditto.
4286 (find_new_threads_callback): Ditto.
4290 * MAINTAINERS: Add myself to the write-after-approval list.
4294 * solib-svr4.c: Include "elf/mips.h".
4295 (elf_locate_base): Make DT_MIPS_RLD_MAP block unconditional.
4299 * dwarf2read.c (read_comp_unit, sibling_die, dump_die,
4300 dump_die_list, store_in_ref_table, follow_die_ref): Make these
4301 static; they're private functions.
4305 * coffread.c (coff_symfile_read): Parse DWARF2 info if present.
4309 * TODO: Add import of readline 4.2 as a gdb 5.2 task.
4313 * config/djgpp/fnchange.lst: Sort.
4317 * config/djgpp/fnchange.lst: Rename mi0-var-block.exp,
4318 mi0-var-cmd.exp, mi0-var-child.exp and mi0-var-display.exp.
4322 * MAINTAINERS: Add myself to the write-after-approval list.
4326 * remote-array.c (SWAP_TARGET_AND_HOST): Delete macro.
4327 (get_hex_word): Don't use HOST_BYTE_ORDER.
4328 (array_fetch_registers): Add variable ``reg''. Use
4329 store_unsigned_integer to byte-swap the register. Delete unused
4334 * MAINTAINERS: Add Per Bothner to Java maintainers.
4338 * rdi-share/unixcomm.c (SERIAL_PREFIX): Always provide a default.
4339 * rdi-share/hostchan.h (__unix): Hack, provide a default value.
4340 * rdi-share/host.h (__unix): Hack, define when __NetBSD__.
4342 * MAINTAINERS: Update. arm-elf builds.
4346 * d10v-tdep.c (d10v_ts2_dmap_register): Doc fix.
4348 * d10v-tdep.c (d10v_frame_chain_valid, d10v_use_struct_convention,
4349 d10v_breakpoint_from_pc, d10v_register_byte,
4350 d10v_register_raw_size, d10v_register_virtual_size,
4351 d10v_register_virtual_type, d10v_register_convertible,
4352 d10v_register_convert_to_virtual, d10v_register_convert_to_raw,
4353 d10v_make_daddr, d10v_make_iaddr, d10v_daddr_p, d10v_iaddr_p,
4354 d10v_convert_iaddr_to_raw, d10v_convert_daddr_to_raw,
4355 d10v_store_struct_return, d10v_store_return_value,
4356 d10v_extract_struct_value_address, d10v_frame_saved_pc,
4357 d10v_saved_pc_after_call, d10v_pop_frame, d10v_skip_prologue,
4358 d10v_frame_chain, d10v_frame_init_saved_regs,
4359 d10v_init_extra_frame_info, d10v_read_pc, d10v_write_pc,
4360 d10v_read_sp, d10v_write_sp, d10v_write_fp, d10v_read_fp,
4361 d10v_push_return_address, d10v_push_arguments,
4362 d10v_extract_return_value): Make these functions static.
4366 From Fernando Nasser:
4367 * infrun.c (handle_inferior_event): Handle "nexti" inside function
4372 * infrun.c (handle_inferior_event): Replace prev_pc test in all
4373 calls to bpstat_stop_status (removed in 1999-09-24). This test
4374 helps distinguish stepping over a breakpoint trap from stepping
4375 thru a jump to the instruction after a breakpoint trap.
4376 (handle_inferior_event): Don't bother writing the PC if
4377 DECR_PC_AFTER_BREAK is zero (optimization).
4378 * breakpoint.c (bpstat_stop_status): Add comment explaining the
4379 purpose and usage of the "not_a_breakpoint" argument in computing
4380 the breakpoint address.
4385 * monitor.c (setmem_resp_delim_pattern): New regexp pattern.
4386 (setreg_resp_delim_pattern): Likewise.
4387 (setmem_resp_delim_fastmap): New buffer.
4388 (setreg_resp_delim_fastmap): Likewise.
4389 (monitor_open): Initialize above regexp if they are defined.
4390 (monitor_write_memory): Use regexp to check the result of write.
4391 (monitor_store_register): Likewise to check result of register set.
4396 * coff-solib.c: Include symfile.h and objfiles.h to make
4397 OBJF_SHARED visible.
4401 * configure.in (--enable-gdbmi): Enable by default.
4402 * configure: Regenerate.
4408 * solib-osf.c (osf_in_dynsym_resolve_code): Add a comment
4409 explaining the consequences of always returning zero. No code
4415 * defs.h (enum target_signal): Add TARGET_SIGNAL_REALTIME_65
4416 to TARGET_SIGNAL_REALTIME_127.
4417 * target.c (struct signals): Add SIG63 to SIG127.
4418 (target_signal_from_host): Handle up to 127 signals.
4419 (do_target_signal_to_host): Likewise.
4423 * remote-sds.c (sds_start_remote): Change type of ``c'' to int
4424 from possibly unsigned char.
4428 * ser-ocd.c: Delete file.
4429 * Makefile.in (ALLDEPFILES): Remove ser-ocd.c
4430 (ser-ocd.o): Delete target.
4436 * MAINTAINERS (Write After Approval): Sort.
4437 (Past Maintainers): Daniel Berlin stepped down as C++ maintainer.
4441 * breakpoint.c (breakpoint_1): Always output the breakpoint
4442 headings. Leave it to ui-out to decide which
4446 * stack.c (print_frame): For ui_out, output a list of arguments.
4450 * MAINTAINERS (paper trail): Update.
4454 * infrun.c: Eliminate the "thread_step_needed" state variable,
4455 and replace it with a relatively simple test in resume.
4456 (resume): Replace thread_step_needed logic with a test for
4457 stepping, breakpoint_here_p and breakpoints_inserted.
4458 Move CANNOT_STEP_BREAKPOINT logic to after thread_step logic.
4459 (proceed): Discard thread_step_needed logic.
4460 (wait_for_inferior, fetch_inferior_event, handle_inferior_event):
4461 Discard thread_step_needed logic.
4465 * remote-rdi.c (arm_rdi_wait): Fix return type in prototype.
4466 * rdi-share/host.h: Add missing parenthesis in conditional.
4470 * configure.in: include nlist.h when checking for member som_addr
4472 * configure: regenerate.
4476 * cli-out.c (cli_out_new): Initialize new structure member
4481 * ui-out.h (ui_out_table_header): Add parameter ``col_name''.
4482 (table_header_ftype): Ditto.
4483 * cli-out.c (cli_table_header): Update.
4484 * ui-out.c (ui_out_table_header): Update.
4485 (uo_table_header): Update.
4486 (default_table_header): Update.
4487 (append_header_to_list): Update.
4488 (struct ui_out_header): Add field ``col_name''.
4489 (append_header_to_list): Use xstrdup. Initialize col_name.
4490 * breakpoint.c (breakpoint_1): Pass COL_NAME to
4491 ui_out_table_header.
4495 * cli-out.c: Include "gdb_assert.h'.
4496 (struct ui_out_data): Add field ``suppress_output.
4497 (cli_table_begin): When NR_ROWS is zero, suppress_output.
4498 (cli_table_end): Clear suppress_output.
4499 (cli_table_body): Check suppress_output.
4500 (cli_table_header, cli_begin): Ditto.
4501 (cli_end, cli_field_int, cli_field_skip): Ditto.
4502 (cli_field_string, cli_field_fmt, cli_spaces): Ditto.
4503 (cli_text, cli_message, cli_wrap_hint): Ditto.
4504 * breakpoint.c (breakpoint_1): Close the ui_out table before
4505 printing the breakpoint not found message.
4509 * ui-out.c (ui_out_table_begin): Add parameter ``nr_rows''.
4510 (default_table_begin): Ditto.
4511 (uo_table_begin): Ditto.
4512 * cli-out.c (cli_table_begin): Ditto.
4513 * ui-out.h (ui_out_table_begin): Update
4514 (table_begin_ftype): Update.
4515 * breakpoint.c (breakpoint_1): Pass nr_printable_breakpoints to
4520 * breakpoint.c (breakpoint_1): Restructure. Compute the
4521 nr_printable_breakpoints. Move the header output to before the
4522 main print breakpoints loop.
4523 (user_settable_breakpoint): New function.
4527 * infrun.c, breakpoint.c: Use strncmp as the "mi" test. Allow,
4528 "mi", "mi0" and "mi1".
4532 * gdbarch.sh: Generate an error when conflicting macro
4533 definitions. Generate an error when both pure multi-arch and
4535 * gdbarch.h, gdbarch.c: Regenerate.
4536 * defs.h (GDB_MULTI_ARCH_TM): Rewrite definition.
4540 * config/sparc/tm-sun4sol2.h (GDB_MULTI_ARCH): Down grade to
4541 GDB_MULTI_ARCH_PARTIAL from two.
4546 * cli/cli-script.c (free_command_lines): Reset list pointer.
4550 * arch-utils.c (init_frame_pc_default): New function
4551 * arch-utils.h (init_frame_pc_default): Declare.
4552 * gdbarch.sh (INIT_FRAME_PC): Default to init_frame_pc_default and
4553 not init_frame_pc_noop.
4554 * gdbarch.h, gdbarch.c: Re-generate.
4555 * blockframe.c (INIT_FRAME_PC): Delete macro definition.
4556 * mips-tdep.c (mips_gdbarch_init): Set init_frame_pc to
4561 * gdbarch.c: Regenerate. Out-of-sync with gdbarch.sh.
4565 * gdbarch.sh (CANNOT_FETCH_REGISTER): Multi-arch.
4566 (CANNOT_STORE_REGISTER): Ditto.
4567 * infptrace.c (CANNOT_FETCH_REGISTER): Delete definition.
4568 (CANNOT_STORE_REGISTER): Ditto.
4569 * regcache.c (CANNOT_STORE_REGISTER): Ditto.
4570 * lynx-nat.c (CANNOT_STORE_REGISTER): Ditto.
4571 * arch-utils.h (cannot_register_not): Define.
4572 * arch-utils.c (cannot_register_not): Declare.
4576 * gdbarch.sh: Clarify pre/post default
4577 (INIT_FRAME_PC_FIRST, INIT_FRAME_PC): Multiarch.
4578 * blockframe.c (get_prev_frame): Remove #ifdef from around
4579 INIT_FRAME_PC_FIRST call.
4580 * arch-utils.c (init_frame_pc_noop): Define.
4581 * arch-utils.h (init_frame_pc_noop): Declare.
4582 * config/mips/tm-mips.h (INIT_FRAME_PC_FIRST): Delete.
4583 (INIT_FRAME_PC, mips_init_frame_pc_first): Ditto.
4584 * mips-tdep.c (mips_init_frame_pc_first): Make static.
4585 (mips_gdbarch_init): Initialize init_frame_pc_first.
4586 (mips_dump_tdep): Update.
4590 * infrun.c (context_switch): New function. Abstract the operation
4591 of saving and restoring infrun's state when switching threads.
4592 (handle_inferior_event): Normalize the handling of the 'thread hop'
4593 event (when the wrong thread hits a thread-specific breakpoint,
4594 and we need to solo-step that thread past the breakpoint).
4595 Call keep_going, instead of target_resume. Handle the subsequent
4596 singlestep-trap as a normal event instead of just resuming.
4600 * arch-utils.c (core_addr_identity): New function. Rename
4601 default_convert_from_func_ptr_addr.
4602 * gdbarch.sh (CONVERT_FROM_FUNC_PTR_ADDR): Update.
4603 (ADDR_BITS_REMOVE): Define. Default to core_addr_identity.
4604 * defs.h (ADDR_BITS_REMOVE): Delete macro definition.
4605 * config/mips/tm-mips.h (ADDR_BITS_REMOVE): Delete definition.
4606 * mips-tdep.c (mips_addr_bits_remove): Make static.
4607 (mips_gdbarch_init): Initialize addr_bits_remove.
4612 * configure.tgt: Add S/390 31 & 64 bit target configuration.
4613 * configure.host: Ditto for host.
4617 * gdbarch.sh (EXTRACT_STRUCT_VALUE_ADDRESS_P): Delete definition.
4618 (EXTRACT_STRUCT_VALUE_ADDRESS): Change to a function with
4620 * gdbarch.h, gdbarch.c: Regenerate.
4621 * values.c (value_being_returned): Change the reference to
4622 EXTRACT_STRUCT_VALUE_ADDRESS_P to a function call.
4626 * MAINTAINERS: Add Paul Hilfinger and Joel Brobecker to the
4627 Write After Approval list.
4631 * remote.c (show_remote_protocol_qSymbol_packet_cmd,
4632 set_remote_protocol_qSymbol_packet_cmd): New functions.
4633 (init_all_packet_configs, show_remote_cmd): Add qSymbol packet.
4634 (remote_check_symbols): New function. Implement qSymbol packet,
4635 allowing target to request symbol lookup service from gdb.
4636 (remote_open_1, remote_async_open_1): Call remote_check_symbols,
4637 allowing symbol lookup from exec_bfd on connection to target.
4638 (remote_new_objfile): New function. Catch new objfile notifications
4639 from shared library module, and call remote_check_symbols.
4640 (_initialize_remote): Hook remote_new_objfile into the shared
4641 library notification chain. Add "set remote symbol-lookup" command.
4645 * tracepoint.c (trace_command): We now have tracepoint
4646 events. Get rid of those ugly hooks.
4647 (tracepoint_operation): Likewise.
4648 (trace_pass_command): Likewise.
4652 * gdbthread.h (struct thread_info): Add new fields:
4653 current_line, current_symtab, step_sp, for saved infrun state.
4654 * thread.c (save_infrun_state, load_infrun_state): Save and
4655 restore current_line, current_symtab, and step_sp.
4656 (add_thread): Rather than adding assignments to initialize
4657 the new fields, just use memset (tp, 0, sizeof (*tp).
4658 This way future new fields will not be overlooked.
4659 * infrun.c (handle_inferior_event): Save and restore save_sp,
4660 current_line, and current_symtab when switching threads.
4664 * MAINTAINERS: Add Andrew Cagney as co-maintainer of
4669 * symtab.c (lookup_symtab_1): Replace basename with lbasename.
4670 (lookup_partial_symtab, file_matches): Ditto.
4671 (make_source_files_completion_list): Ditto.
4672 (make_file_symbol_completion_list): Ditto. Make local char*
4673 variable ``tail'' constant.
4674 (make_source_files_completion_list): Ditto with ``base_name''.
4675 * source.c (open_source_file): Use lbasename. Make ``p'' const
4680 * config/i386/xm-go32.h (SLASH_P, ROOTED_P, SLASH_CHAR)
4681 (SLASH_STRING): Remove unused definitions.
4682 * config/i386/xm-cygwin.h: Likewise.
4686 * ui-out.c (ui_out_list_begin): Add parameter ``id''.
4687 (make_cleanup_ui_out_list_begin_end): Ditto. Open the list.
4688 * ui-out.h: Update declarations.
4692 * source.c (openp): Make parameters ``path'' and ``string''
4694 (openp): Use alloca to safely duplicate ``string''. Make local
4695 variables ``p'' and ``p1'' constant. Delete char* casts.
4698 * symtab.c (lookup_symtab_1): Make parameter ``name'' constant.
4699 (lookup_symtab, lookup_partial_symtab): Ditto.
4700 * symtab.h (lookup_symtab, lookup_partial_symtab): Update.
4704 * ui-out.h (ui_out_table_begin): Make char* parameters constant.
4705 (ui_out_table_header, ui_out_field_int): Ditto.
4706 (ui_out_field_core_addr, ui_out_field_string): Ditto.
4707 (ui_out_field_stream, ui_out_field_fmt): Ditto.
4708 (ui_out_field_skip, ui_out_text, ui_out_message): Ditto.
4709 * ui-out.c (ui_out_table_begin, ui_out_table_header): Update.
4710 (ui_out_field_core_addr, ui_out_field_stream): Update.
4711 (ui_out_field_string, ui_out_field_fmt): Update.
4712 (ui_out_text, ui_out_message): Update.
4713 (append_header_to_list): Make char* parameters constant.
4714 (uo_table_header, uo_table_begin): Ditto.
4715 (uo_field_int, uo_field_skip): Ditto.
4716 (uo_field_string, uo_field_fmt): Ditto.
4717 (uo_text, uo_message): Ditto.
4721 * completer.c (gdb_completer_loc_break_characters): New variable.
4722 (line_completion_function): If we are completing on locations,
4723 back up the start of word pointer past all characters which can
4724 appear in a location spec.
4725 (location_completer): New function.
4727 * completer.h: Add prototype for location_completer.
4729 * symtab.c (make_source_files_completion_list)
4730 (add_filename_to_list, not_interesting_fname): New functions.
4731 (filename_seen): New function, body extracted from
4732 output_source_filename.
4733 (output_source_filename): Call filename_seen to check if the file
4734 was already printed.
4735 (make_symbol_completion_list): If TEXT includes a
4736 double-quoted string, return an empty list, not NULL.
4737 (make_file_symbol_completion_list): New function, similar to
4738 make_symbol_completion_list but with an additional argument
4741 * symtab.h (make_file_symbol_completion_list)
4742 (make_source_files_completion_list): Add prototypes.
4744 * breakpoint.c (_initialize_breakpoint): Make location_completer
4745 be the completion function for all commands which set breakpoints
4747 (top-level): #include "completer.h".
4749 * tracepoint.c (_initialize_tracepoint): Make location_completer
4750 be the completion function for the "trace" command.
4751 (top-level): #include "completer.h".
4753 * printcmd.c (_initialize_printcmd): Make location_completer be
4754 the completion function for the "print", "inspect", "call", and
4755 "disassemble" commands.
4756 (top-level): #include "completer.h".
4758 * infcmd.c (_initialize_infcmd): Make location_completer be the
4759 completion function for the "go", "jump", and "until" commands.
4760 (top-level): #include "completer.h".
4764 * gnu-regex.c: Eliminate obsolete check for _MSC_VER.
4765 * utils.c (notice_quit): Remove dummy function only used for _MSC_VER.
4766 * values.c (unpack_double): Remove obsolete check for _MSC_VER.
4768 * m32r-rom.c: Ditto.
4770 * ser-e7kpc.c: Ditto. Define WIN32_LEAN_AND_MEAN under _WIN32, for
4772 (get_ds_base): Remove _MSC_VER version of this function.
4773 * nindy-share/ttyflush.c: Ditto.
4774 * rdi-share/host.h: Ditto.
4775 * ser-go32.c (dos_readchar): Remove call to obsolete function.
4776 * remote-sim.c (gdb_os_poll_quit): Ditto.
4777 * remote-e7000.c (expect): Remove obsolete #if 0'ed code.
4779 * main.c (captured_main): Eliminate special Cygwin checks.
4780 * ser-tcp.c: Remove unneeded __CYGWIN__ guard against system include.
4784 * Makefile.in (gdbcmd_h): Add ui_out_h.
4785 (breakpoint.o, infcmd.o, main.o, printcmd.o, stack.o): Ditto.
4786 (thread.o, top.o): Ditto.
4788 * ui-out.h (table_begin_ftype): Make string parameters constant.
4789 (table_header_ftype): Ditto.
4790 (field_int_ftype): Ditto.
4791 (field_skip_ftype): Ditto.
4792 (field_string_ftype): Ditto.
4793 (field_fmt_ftype): Ditto.
4794 (text_ftype): Ditto.
4795 (message_ftype): Ditto.
4796 * cli-out.c (cli_table_begin): Ditto.
4797 (cli_table_header): Ditto.
4798 (cli_field_int): Ditto.
4799 (cli_field_skip): Ditto.
4800 (cli_field_string): Ditto.
4801 (cli_field_fmt): Ditto.
4803 (cli_message): Ditto.
4804 (out_field_fmt): Ditto.
4805 * ui-out.c (default_table_begin): Ditto.
4806 (default_table_header): Ditto.
4807 (default_field_int): Ditto.
4808 (default_field_skip): Ditto.
4809 (default_field_string): Ditto.
4810 (default_field_fmt): Ditto.
4811 (default_text): Ditto.
4812 (default_message): Ditto.
4816 * breakpoint.c (delete_breakpoint): Pass mark_inserted to
4817 remove_breakpoint, so that the subsequent test for
4818 bpt->inserted will succeed, and duplicates will be fixed up.
4822 * dwarf2read.c (set_cu_language): Handle DW_LANG_Java.
4826 * tracepoint.c (tracepoint_opertation): Add ui event
4828 (trace_pass_command): Ditto.
4832 * MAINTAINERS (Write After Approval): Note the entry criteria.
4833 (HP/PA): Jeff Law stepped down
4837 * gdbarch.sh: Make sure that '[' doesn't interpret interesting
4838 variable values as operators.
4842 * gdb-events.sh: Fix quote escaping which was obsoleted
4847 * gdb-events.sh: Make if statements and tests
4848 a little more portable.
4849 Don't use shell's echo command to put strings containing
4850 escaped characeters into a file -- different flavors of /bin/sh
4851 require differnt levels of escaping. Use cat <<EOF instead.
4852 Our internal field separator is a colon. Change all
4853 commands which assume it is a space.
4857 * lin-lwp.c (struct lwp_info): Add member `resumed'.
4858 (iterate_over_lwps): Make sure we can handle CALLBACK deleting the
4859 LWP it's called for.
4860 (lin_lwp_attach): Mark LWP as resumed to make sure the fake
4861 SIGSTOP is reported.
4862 (resume_clear_callback): New function.
4863 (resume_set_callback): New function.
4864 (lin_lwp_resume): Mark all LWP's that we're going to resume as
4865 resumed, and unmark all others.
4866 (status_callback): Only report a pending wait status if we pretend
4867 that LP has been resumed.
4868 (resumed_callback): New function.
4869 (lin_lwp_wait): Add assertions to check that LWP's are properly
4870 marked as resumed. Partially revert 2001-05-25 patch by Michael
4871 Snyder: do not resume all threads. Add comment explaining the
4872 problems associated with this bit of code.
4876 * MAINTAINTERS: Syd Polk is stepping down from
4877 maintaining libgui. I am replacing him.
4881 * config/mips/tm-irix6.h: New file.
4883 * config/mips/irix6.mh: New file.
4885 * config/mips/irix6.mt: New file.
4887 * config/mips/xm-irix6.h: New file.
4889 * config/mips/nm-irix6.h: New file.
4891 * mips-tdep.c (mips_gdbarch_init) <MIPS_ABI_N32>: Set up the
4892 disassembler info in tm_print_insn_info as appropriate for the N32
4893 ABI. Force N32 ABI to be the default if the CPU is R8000 or
4896 * configure.tgt (mips*-sgi-irix6*): Map to irix6.
4898 * configure.host (mips*-sgi-irix6*): Ditto.
4902 * gnu-v3-abi.c: Include "gdb_assert.h".
4903 (build_gdb_vtable_type): Replace abort() with gdb_assert().
4907 * cp-abi.h: Rearrange code to put documentation comments above the
4908 functions we export. The actual function table itself simply
4909 refers to those functions. Minor doc fixes.
4911 * gdbarch.sh: Changes to effect the following:
4912 * gdbarch.c (initialize_non_multiarch): New function.
4913 * gdbarch.h (initialize_non_multiarch): New declaration.
4914 * arch-utils.c (initialize_current_architecture): For
4915 non-multiarch configurations, call initialize_non_multiarch.
4919 * symfile.c (compare_psymbols): Replace PTR with void*. Delete
4921 (compare_symbols): Ditto.
4925 * arch-utils.c (generic_prepare_to_proceed): Allow for having
4926 stopped due to a Ctrl-C as well as breakpoints.
4928 * hppa-tdep.c (hppa_prepare_to_proceed): Add FIXME as this may not
4929 support thread switches after Ctrl-C.
4930 * lin-lwp.c (lin_lwp_prepare_to_proceed): Ditto.
4931 * linux-thread.c (linuxthreads_prepare_to_proceed): Ditto.
4932 * m3-nat.c (mach3_prepare_to_proceed): Ditto.
4936 * gdbarch.sh, gdbarch.c: Revert change of 2001-06-01; all
4937 per-architecture data should be registered at initialization time,
4938 before any gdbarch objects get used, so the generality is
4943 * gdb-events.sh (function_list): Add tracepoint_create,
4944 tracepoint_delete, and tracepoint_modify events.
4945 * gdb-events.c: Regenerated.
4946 * gdb-events.h: Regenerated.
4950 * gdb-events.sh: Update copyrights.
4951 Change free to xfree.
4952 * gdb-events.c: Regenerated.
4953 * gdb-events.h: Regenerated.
4957 * source.c (mod_path, openp): Use #ifdef HAVE_DOS_BASED_FILE_SYSTEM
4958 instead of #if HAVE_DOS_BASED_FILE_SYSTEM.
4959 * completer.c: Ditto.
4960 * cli/cli-cmds.c (cd_command): Ditto.
4964 * mips-tdep.c (show_mipsfpu_command): Remove unused variable msg.
4965 (mips_set_processor_type_command): Remove unused variable j.
4966 (mips_breakpoint_from_pc): Declare breakpoint instruction
4967 sequences as unsigned char, to avoid compiler warnings.
4969 * source.c (mod_path, openp): Use HAVE_DOS_BASED_FILE_SYSTEM
4970 instead of system-specific define's like _WIN32 and __MSDOS__.
4971 Use IS_DIR_SEPARATOR and IS_ABSOLUTE_PATH instead of SLASH_P and
4973 (top-level): #include "filenames.h".
4975 * solib.c (solib_open): Use IS_DIR_SEPARATOR and IS_ABSOLUTE_PATH
4976 instead of SLASH_CHAR, ROOTED_P and SLASH_P.
4977 (top-level): #include "filenames.h".
4979 * defs.h (SLASH_P, SLASH_CHAR, ROOTED_P): Remove definitions.
4980 (SLASH_STRING): Define only for _WIN32.
4982 * completer.c: Use HAVE_DOS_BASED_FILE_SYSTEM instead of
4985 * cli/cli-cmds.c (cd_command): Use IS_DIR_SEPARATOR and
4986 IS_ABSOLUTE_PATH instead of SLASH_P and ROOTED_P. Replace
4987 system-specific ifdefs with HAVE_DOS_BASED_FILE_SYSTEM.
4988 (top-level): #include "filenames.h".
4990 * go32-nat.c (go32_wait): Change the return value to ptid_t.
4992 * config/djgpp/fnchange.lst: Add two new files in the
4993 gdb/testsuite/gdb.c++/ directory to the remapped names.
4995 * config/djgpp/djconfig.sh (lt_cv_sys_max_cmd_len): Set to 12KB.
4999 Expand the gdbarch per-architecture data vector as needed, rather
5000 than requiring that all per-architecture data be registered before
5001 the first gdbarch object is allocated.
5002 * gdbarch.sh: Changes to effect the following:
5003 * gdbarch.c (alloc_gdbarch_data, init_gdbarch_data): Delete
5004 declarations and definitions.
5005 (check_gdbarch_data): New function, and declaration.
5006 (gdbarch_alloc): Don't call alloc_gdbarch_data; leaving the fields
5007 zero is good enough.
5008 (free_gdbarch_data): Tolerate a null data pointer. Free only
5009 those data items gdbarch->data actually has allocated.
5010 (set_gdbarch_data, gdbarch_data): Call check_gdbarch_data.
5011 (gdbarch_update_p): No need to call init_gdbarch_data.
5015 * ia64-tdep.c (is_float_or_hfa_type_recurse): Call check_typedef()
5016 on types that we wish to recurse on.
5017 (slot_alignment_is_next_even): New function.
5018 (ia64_push_arguments): Call slot_alignment_is_next_even() to
5019 examine the type in order to decide if it's necessary to skip
5024 * thread.c (delete_step_resume_breakpoint): New function.
5025 Maintain internal consistency of the thread list while deleting
5026 a step_resume_breakpoint.
5027 * gdbthread.h (delete_step_resume_breakpoint): Export.
5028 * breakpoint.c (bpstat_find_step_resume_breakpoint):
5029 Make thread-aware: don't return a step_resume_breakpoint
5030 for the wrong thread.
5031 * infrun.c (wait_for_inferior): Call delete_step_resume_breakpoint
5032 instead of delete_breakpoint_current_contents.
5033 (fetch_inferior_event): Ditto.
5034 (handle_inferior_event): Call delete_step_resume_breakpoint
5035 instead of delete_breakpoint.
5036 * infrun.c (handle_inferior_event): After singlestepping over a
5037 thread-specific breakpoint, use currently_stepping() to decide
5038 whether to step or continue.
5042 * gnu-v3-abi.c (gnu_v3_abi_ops, vtable_type_gdbarch_data): Make
5043 these static --- there's no reason other files should use these.
5045 * partial-stab.h (case N_FUN: case 'f':, case N_FUN: case 'F':)
5048 * partial-stab.h: New complaint: function_outside_compilation_unit.
5049 (case N_FUN: case 'f':, case N_FUN: case 'F':): If pst is zero,
5050 complain, and don't try to set pst's start address.
5054 * ia64-linux-tdep.c (IA64_LINUX_SIGCONTEXT_OFFSET): Revise to
5055 match the location at which the kernel is placing the sigcontext
5058 * ia64-tdep.c (max_skip_non_prologue_insns): New static global.
5059 (refine_prologue_limit): New function.
5060 (examine_prologue): Further limit number of instructions
5061 scanned by calling refine_prologue_limit(). Revise way in
5062 which the end of prologue address is computed for frameless
5067 * partial-stab.h: Revert previous patch.
5071 * partial-stab.h: Consistently guard against pst being NULL.
5075 * symfile.c (compare_psymbols, compare_symbols): Declare using
5076 PTR, as in the definition.
5077 * minsyms.c (compare_minimal_symbols): Likewise.
5078 * coffread.c (find_targ_sec): Likewise.
5079 * elfread.c (free_elfinfo, elf_locate_sections): Likewise.
5080 * mipsread.c (alphacoff_locate_sections): Likewise.
5081 * mdebugread.c (compare_blocks): Likewise.
5085 * solib.c (update_solib_list): Move target_resize_to_sections()
5086 into solib_map_sections() loop.
5087 (info_sharedlibrary_command): Try bfd_arch_bits_per_address() if
5088 bfd_get_arch_size() fails.
5092 * Makefile.in (osfsolib.c, osfsolib.o): Rename to solib-osf.c and
5094 * config/alpha/alpha-osf1.mh (NATDEPFILES): Replace osfsolib.o
5095 with solib-osf.o and solib.o.
5096 * config/alpha/alpha-osf2.mh: Likewise.
5097 * config/alpha/alpha-osf3.mh: Likewise.
5098 * solib-osf.c: New file, renamed and largely rewritten from
5103 * lin-lwp.c (lin_lwp_attach_lwp): Call stop_wait_callback,
5104 to consume the SIGSTOP generated by PTRACE_ATTACH.
5105 (stop_wait_callback): If a SIGTRAP or a SIGINT event is consumed,
5106 try again to get the SIGSTOP event.
5107 (lin_lwp_wait): Resume all threads when ignoring a signal.
5108 This will insure that newly attached threads get resumed.
5109 * lin-lwp.c (stop_wait_callback): Discard redundant SIGINT events.
5110 * remote.c (remote_write_bytes): Update 'p' packet pointer.
5114 * gnu-v2-abi.c (gnuv2_virtual_fn_field): There's no need to clear
5115 VALUE_POINTED_TO_OFFSET here; if value_cast doesn't return a
5116 useful value, then we should fix that instead.
5120 * solist.h (struct so_list): Document the requirement that
5121 current_sos initialize some fields to 0.
5125 * gnu-nat.c: Include <ctype.h>.
5126 (gnu_pid_to_exec_file): Add PID parameter.
5127 (set_sig_thread_cmd): Use PIDGET on return value from
5129 (proc_string): Use MERGEPID to construct argument to
5134 * breakpoint.c (breakpoint_address_is_meaningful): New function.
5135 (check_duplicates): Don't compare non-meaningful addresses.
5139 * thread-db.c: Allow for defunct zombie threads.
5140 (attach_thread): Do not attempt to attach zombie thread.
5141 (thread_db_thread_alive): Return false for defunct zombie thread.
5142 (find_new_threads_callback): Don't add defunct zombie thread to list.
5146 Add support for the GNU V3 C++ ABI.
5147 (Includes changes by Dan Berlin.)
5149 * gnu-v3-abi.c: New file.
5150 * minsyms.c: #include "value.h" and "cp-abi.h".
5151 (install_minimal_symbols): Check the minimal symbol table for
5152 symbols that look mangled in the V3 style, and select the V3 ABI
5154 * Makefile.in (SFILES): Add gnu-v3-abi.c.
5155 (COMMON_OBS): Add gnu-v3-abi.o.
5156 (gnu-v3-abi.o): Add new rule.
5157 (minsyms.o): Depend on $(cp_abi_h) and $(value_h).
5161 * values.c (value_primitive_field): If we're extracting a base
5162 class, then the type of the result should be the base class being
5163 extracted, not the type of which it is a base class.
5165 * value.h (struct value): Doc fix, and rearrange members to place
5166 them near their explanations.
5170 * remote.c (remote_async_wait): Added new variable fieldsize.
5171 Add fieldsize (return value of hex2bin) to string pointer p.
5175 * m68hc11-tdep.c (m68hc11_pop_frame): Fix stack pointer computation.
5176 (m68hc11_analyze_instruction): Update the pc correctly.
5177 (m68hc11_guess_from_prologue): Take into account the stack correction
5178 for the saving address.
5182 Changes by Jim Ingham:
5184 * values.c (value_change_enclosing_type): New function. If the
5185 new enclosing type is larger than the old one, we need to allocate
5187 * value.h: Add value_change_enclosing_type prototype.
5188 * valops.c (value_cast): Use it.
5189 (value_assign): Use it.
5190 (value_addr): Use it.
5191 (value_ind): Use it.
5192 (value_full_object): Use it.
5196 * values.c (value_static_field): Handle static fields that have a
5201 * blockframe.c (create_new_frame): Zero all the fields via memset,
5202 rather than zeroing them one by one.
5206 * top.c (user_args): Remove unused declaration.
5210 * infcmd.c (do_registers_info): Move alloca outside of loop.
5214 * remote.c (remote_wait): Added new variable fieldsize.
5215 Add fieldsize (return value of hex2bin) to string pointer p.
5219 * sparc-tdep.c (sparc_gdbarch_init): Get the architecture from
5224 * lin-lwp.c (detach_callback, lin_lwp_wait, lin_lwp_pid_to_str):
5225 Adjust format strings for printing LWPs to account for the fact
5226 that the type returned by GET_LWP() is now a long instead of an
5231 * inferior.h (null_ptid, minus_one_ptid): New variable declarations.
5232 (ptid_build, pid_to_ptid, ptid_get_pid, ptid_get_lwp)
5233 (ptid_get_tid, ptid_equal): New function declarations.
5234 * infrun.c (null_ptid, minus_one_ptid): New variables.
5235 (ptid_build, pid_to_ptid, ptid_get_pid, ptid_get_lwp)
5236 (ptid_get_tid, ptid_equal): New functions.
5237 (_initialize_infrun): Initialize null_ptid, minus_one_ptid,
5238 inferior_ptid, and target_last_wait_ptid.
5240 * defs.h (ptid_t): Redefine to be a struct rather than an int.
5241 (pid_to_ptid, null_ptid, ptid_equal): Delete these macros.
5242 (PIDGET, TIDGET, MERGEPID): Redefine these macros using the
5243 new ptid accessors and constructor.
5245 * config/i386/tm-i386v42mp.h (PIDGET, TIDGET, LIDGET, MERGEPID,
5246 MKLID, MKTID, ISTID): Provide new definitions for these macros.
5247 The old macros are retained, but disabled via #if 0 in order
5248 to aid in future restructuring. See FIXME.
5250 * arm-linux-nat.c (PIDGET, TIDGET): Delete macro definitions.
5251 * i386-linux-nat.c (PIDGET, TIDGET): Likewise.
5252 * infptrace.c (PIDGET, TIDGET): Likewise.
5253 * lin-lwp.c (PIDGET0, PIDGET, TIDGET, MERGEPID): Likewise.
5254 * lin-thread.c (PIDGET0, PIDGET, TIDGET, MERGEPID): Likewise.
5255 * proc-service.c (MERGEPID): Likewise.
5256 * procfs.c (PIDGET, TIDGET, MERGEPID): Likewise.
5257 * thread-db.c (PIDGET0, PIDGET, TIDGET, MERGEPID): Likewise.
5258 * config/nm-linux.h (PIDGET0, PIDGET, TIDGET, MERGEPID): Likewise.
5259 * config/i386/tm-i386sol2.h (PIDGET0, PIDGET, TIDGET, MERGEPID):
5261 * config/sparc/tm-sun4sol2.h (PIDGET0, PIDGET, TIDGET, MERGEPID):
5264 * lin-lwp.c (THREAD_FLAG): Delete macro definition.
5265 (GET_LWP): Redefine in terms of ptid_get_lwp().
5266 (GET_PID): Redefine in terms of ptid_get_pid().
5267 (is_lwp): Redefine without the need for THREAD_FLAG.
5268 (BUILD_LWP): Redefine in terms of ptid_build().
5269 * lin-thread.c (THREAD_FLAG): Delete macro definition.
5270 (GET_LWP): Redefine in terms of ptid_get_lwp().
5271 (GET_PID): Redefine in terms of ptid_get_pid().
5272 (GET_THREAD): Redefine in terms of ptid_get_tid().
5273 (BUILD_THREAD, BUILD_LWP): Redefine in terms of ptid_build().
5274 (is_lwp, is_thread): Redefine.
5275 (linux_child_wait, check_all_signal_numbers)
5276 (linuxthreads_discard_global_state, attach_thread): Declare these
5277 functions to squash warnings about missing declarations.
5278 * sol-thread.c (THREAD_FLAG): Delete macro definition.
5279 (GET_PID): Redefine in terms of ptid_get_pid().
5280 (GET_LWP): Redefine in terms of ptid_get_lwp().
5281 (GET_THREAD): Redefine in terms of ptid_get_tid().
5282 (BUILD_THREAD, BUILD_LWP): Redefine in terms of ptid_build().
5283 (is_lwp, is_thread): Redefine.
5284 * thread-db.c (THREAD_FLAG): Delete macro definition.
5285 (GET_PID): Redefine in terms of ptid_get_pid().
5286 (GET_LWP): Redefine in terms of ptid_get_lwp().
5287 (GET_THREAD): Redefine in terms of ptid_get_tid().
5288 (BUILD_THREAD, BUILD_LWP): Redefine in terms of ptid_build().
5289 (is_lwp, is_thread): Redefine.
5291 * corelow.c (add_to_thread_list, get_core_register_section):
5292 Eliminate hacks needed to prevent regressions when inferior_ptid
5293 wasn't wide enough to hold the core file thread id in the pid
5294 component of inferior_ptid.
5298 * remote.c (hex2bin): Make first argument const.
5299 Require explicit count, don't accept null-terminated str.
5300 (remote_resume, remote_async_resume): White space fix-up.
5301 (remote_write_bytes): Set nr_bytes to return value of bin2hex.
5305 * symtab.c (lookup_symtab_1): Use lbasename (NAME) instead of
5306 basename (NAME). The FreeBSD basename returns a pointer to a
5307 static buffer, even if it's simply returning a string identical to
5309 (lookup_partial_symtab): Likewise.
5313 * solib.c, solib.h: Add comment for function no_shared_libraries.
5317 * solib.h (no_shared_libraries): Make declaration match definition
5322 * remote.c (remote_write_bytes): Set nr_bytes before returning it.
5323 * solib.h (no_shared_libraries): Declare.
5327 * gdbarch.sh (struct gdbarch_info): Delete field bfd_architecture.
5328 (gdbarch_update_p): Rewrite logic filling in INFO struct. Use
5329 user specified values when available.
5330 * rs6000-tdep.c (rs6000_gdbarch_init): Update. Get the
5331 architecture from info.bfd_arch_info.
5332 * gdbarch.c, gdbarch.h: Regenerate.
5336 * remote-e7000.c (e7000_open): Check for bad baud rate.
5337 * remote-st.c (st2000_open): Ditto.
5341 * thread.c (do_captured_list_thread_ids): Use ui_out_tuple_begin
5342 and ui_out_tuple_end instead of ui_out_list_begin and
5345 * Makefile.in (gnu-v2-abi.o): Add $(demangle_h) to list of
5346 dependencies. Reorder dependencies to match #includes in file,
5347 for easier verification.
5351 * breakpoint.c: Replace ui_out_list_begin, ui_out_list_end and
5352 make_cleanup_ui_out_list_end with ui_out_tuple_begin,
5353 ui_out_tuple_end and make_cleanup_ui_out_tuple_begin_end.
5354 * cli/cli-setshow.c: Ditto.
5355 * printcmd.c: Ditto.
5358 * ui-out.h (enum ui_out_type): Fix tipo - tupple -> tuple.
5359 * ui-out.c (ui_out_list_begin): Delete ``lstid'' parameter.
5360 (ui_out_tuple_begin): New function.
5361 (ui_out_tuple_end): New function.
5362 (ui_out_tuple_begin_end): New function.
5363 (make_cleanup_ui_out_list_begin_end): Replace
5364 make_cleanup_ui_out_list_end function.
5365 * ui-out.h (ui_out_list_begin): Update declaration.
5366 (make_cleanup_ui_out_list_begin_end): Replace
5367 make_cleanup_ui_out_list_end declaration.
5368 (ui_out_tuple_begin, ui_out_tuple_end): Declare.
5369 (ui_out_tuple_begin_end): Declare.
5373 * gnu-v2-abi.c: Don't #include "gdb_regex.h". We don't use it.
5378 * config/pa/tm-hppa.h: Remove trigraph.
5379 * hp-symtab-read.c (hpread_type_translate): Provide return value.
5380 (hpread_read_struct_type): Remove trigraph. Add parameter in
5382 (hpread_read_array_type): Provide return value.
5383 (hpread_type_lookup): Avoid ambiguous `else'. Provide return
5385 * hppa-tdep.c (initialize_hp_cxx_exception_support): Remove
5390 * mips-tdep.c (mips_store_return_value,
5391 mips_extract_return_value): Pass arguments to
5392 return_value_location in the proper order.
5396 * Makefile.in (VERSION): Delete. Moved to file ``version.in''.
5397 (version.c): Depends on file ``version.in''. Extract version
5398 number from ``version.in'' file.
5399 (clean mostlyclean): Update.
5400 * version.in: New file.
5405 * breakpoint.c (set_raw_breakpoint): Add new parameter
5406 representing the breakpoint's type. Adjust all callers.
5407 (create_longjmp_breakpoint, create_temp_exception_breakpoint)
5408 (create_thread_event_breakpoint): Don't test for zero return
5409 value from set_raw_breakpoint(). It can never be zero.
5410 (create_exception_catchpoint, watch_command_1): Move logic
5411 which calculates the breakpoint type prior to the call to
5412 set_raw_breakpoint().
5416 * ser-unix.c (rate_to_code): Issue warning if baud rate is invalid.
5417 (hardwire_setbaudrate): Set errno to EINVAL and return with error
5418 if the conversion of the baud rate to code fails.
5422 * ui-out.h (make_cleanup_ui_out_begin_end): Declare.
5423 * ui-out.c (struct ui_out_end_cleanup_data): Define.
5424 (do_cleanup_end): New function. Replace do_list_end.
5425 (make_cleanup_ui_out_end): New function.
5426 (make_cleanup_ui_out_begin_end): New function.
5427 (make_cleanup_ui_out_list_end): Use make_cleanup_ui_out_end.
5431 * MAINTAINERS: Declare xcoffread.c open to all maintainers,
5436 * proc-api.c (ioctl_with_trace): Fix uninitialized variable.
5440 * MAINTAINERS: Add testsuite subdirectory co-maintainers.
5444 * Makefile.in (mi-main.o): Compile with -Werror.
5448 * remote.c (remote_open_1): Call no_shared_libraries, so that
5449 symbols for shared libraries can be reloaded per session.
5450 (remote_async_open_1): Ditto.
5451 * remote.c (bin2hex, hex2bin): New functions. Factor out these
5452 two conversions which are coded for repeatedly in this module.
5453 (remote_threads_extra_info, remote_wait, remote_async_wait,
5454 store_register_using_P, remote_store_registers, remote_write_bytes,
5455 remote_read_bytes, remote_rcmd): Use bin2hex and hex2bin instead
5456 of coding the conversions inline.
5457 (fromhex): Not exported, change from extern to static.
5461 * arch-utils.c (initialize_current_architecture): Delete obsolete
5462 ``info architecture'' command.
5463 (info_architecture): Delete function.
5467 * TODO (5.1, 5.2): Update.
5471 * MAINTAINERS: Jim Ingham is no longer maintaining Arm related
5476 * Makefile.in (SUBDIR_GDBTK_OBS): Add gdbtk-bp.o, gdbtk-register.o
5478 (SUBDIR_GDBTK_SRCS): Ditto for the sources.
5479 (gdbtk-bp.o): New rule.
5480 (gdbtk-register.o): New rule.
5481 (gdbtk-stack.o): New rule.
5482 (gdbtk-cmds.o): Update dependencies.
5484 (gdbtk-hooks.o): Ditto.
5485 (gdbtk-varobj.o): Ditto.
5489 * varobj.c (c_number_of_children): Fix memory leak. Delete unwanted old
5490 variables, not just unregister them.
5494 * varobj.c (c_number_of_children): Check for target type of void*,
5495 not the target type name. Allow dereferencing char*.
5499 * symfile.c (symbol_file_add_main_1): New static function.
5500 Passes the flags arguments to symbol_file_add() and takes care
5501 of any necessary reinitializations.
5502 (symbol_file_command): Call symbol_file_add_main_1() instead of
5504 (symbol_file_add_main): Ditto.
5508 * lin-lwp.c (lin_lwp_pid_to_str): Revert inadvertent format
5509 string change in 2001-05-03 changes.
5510 (lin_lwp_wait): Revert GET_LWP coercion introduced in 2001-05-03
5515 * lin-lwp.c (lin_lwp_attach): Use PIDGET() to fetch the pid
5516 component from inferior_ptid.
5517 (lin_lwp_detach): Use pid_to_ptid() to convert from a pid to a
5522 * sh3-rom.c (_initialize_sh3_rom): Get rid of specific _WINDOWS
5523 conditional for help with connections through parallel ports,
5524 given that the actual code for downloading through a parallel port
5525 is not conditionalized.
5527 * sh-tdep.c: Remove WIN32_WCE conditional. The wince sh target is
5528 unmaintaned, and probably on its way to obsolescence.
5532 * i386-tdep.c (i386_frame_saved_pc): New function.
5533 * config/i386/tm-i386.h (FRAME_SAVED_PC): Redefine in terms of
5534 i386_frame_saved_pc.
5535 (i386_frame_saved_pc): New prototype.
5537 * i386-tdep.c (i386_register_virtual_type): New function.
5538 (i386_register_convertible): New function.
5539 * config/i386/tm-i386.h (REGISTER_VIRTUAL_TYPE): Redefine in terms
5540 of i386_register_virtual_type.
5541 (REGISTER_CONVERTIBLE): Redefine in terms of
5542 i386_register_convertible.
5543 (i386_register_virtual_type, i386_register_convertible): New
5548 * Makefile.in (mn10300-tdep.o): New rule.
5550 * Makefile.in (gdb_string_h): Define. Use it throughout.
5551 Some rules were already using this, even though it isn't defined.
5553 * Makefile.in (obstack_h, target_h): Define; these are already
5554 used elsewhere, but have been expanding to the empty string.
5555 (memattr_h): Define; needed by target_h.
5557 * mn10300-tdep.c (mn10300_extract_return_value): Mark this as
5558 static. (This was accidentally omitted from the earlier patch.)
5560 * mn10300-tdep.c (mn10300_dwarf2_reg_to_regnum): New function.
5561 (mn10300_gdbarch_init): Register it as the architecture's
5562 dwarf2_reg_to_regnum method.
5564 Correct and expand handling of `movm' instruction, and register
5566 * config/mn10300/tm-mn10300.h (D0_REGNUM, A0_REGNUM, MDRQ_REGNUM,
5567 MCRH_REGNUM, MCRL_REGNUM, MCVF_REGNUM): New definitions.
5568 (enum movm_register_bits): New enum.
5569 * mn10300-tdep.c (set_movm_offsets): Use symbolic names for the
5570 bits, not hex literals. Handle the `other', `exreg0', and
5571 `exother' bits. Correct handling of `exreg1': it saves r4, r5,
5572 r6, and r7, not r2, r3, r4, and r5.
5573 (saved_regs_size): New function.
5574 (mn10300_frame_chain, mn10300_frame_saved_pc): Use it, instead
5575 of computing the same thing inline, incorrectly.
5577 * mn10300-tdep.c (mn10300_gdbarch_init): We do have a
5578 dummy_breakpoint_offset; it's zero.
5580 * mn10300-tdep.c (mn10300_pop_frame): Split the mn10300-specific
5581 stuff out into mn10300_pop_frame_regular, and use
5582 generic_pop_current_frame. This lets us share code, and also
5583 makes this function's prototype match that expected by gdbarch.
5584 Make this function static.
5585 (mn10300_pop_frame_regular): New function.
5586 (mn10300_gdbarch_init): Register mn10300_pop_frame as the
5587 gdbarch's pop_frame method.
5588 * config/mn10300/tm-mn10300.h (POP_FRAME): Delete definition.
5589 (mn10300_pop_frame): Delete declaration.
5591 * mn10300-tdep.c (mn10300_saved_pc_after_call,
5592 mn10300_extract_return_value,
5593 mn10300_extract_struct_value_address, mn10300_store_return_value,
5594 mn10300_use_struct_convention, mn10300_breakpoint_from_pc,
5595 mn10300_frame_chain, mn10300_skip_prologue,
5596 mn10300_push_arguments, mn10300_push_return_address,
5597 mn10300_store_struct_return, mn10300_frame_saved_pc,
5598 mn10300_init_extra_frame_info, mn10300_frame_init_saved_regs):
5599 Make these functions static; they should only be visible to the
5600 outside world as gdbarch methods.
5602 * config/mn10300/tm-mn10300.h (mn10300_find_callers_reg): Delete
5605 * mn10300-tdep.c (mn10300_gdbarch_init): Put the gdbarch methods
5606 in some rational order.
5608 * mn10300-tdep.c (mn10300_gdbarch_init): Rather than using
5609 generic_pc_in_call_dummy, use pc_in_call_dummy_at_entry_point.
5611 Use gdbarch for most target parameters for the MN10300, rather
5612 than the tm-*.h file.
5613 * config/mn10300/tm-mn10300.h (MAX_REGISTER_VIRTUAL_SIZE,
5614 REGISTER_BYTES, FP_REGNUM, BREAKPOINT_FROM_PC,
5615 FUNCTION_START_OFFSET, DECR_PC_AFTER_BREAK, INNER_THAN,
5616 SAVED_PC_AFTER_CALL, INIT_EXTRA_FRAME_INFO, FRAME_INIT_SAVED_REGS,
5617 FRAME_CHAIN, FRAME_CHAIN_VALID, FRAME_SAVED_PC,
5618 EXTRACT_RETURN_VALUE, EXTRACT_STRUCT_VALUE_ADDRESS,
5619 STORE_RETURN_VALUE, STORE_STRUCT_RETURN, SKIP_PROLOGUE,
5620 FRAME_ARGS_SKIP, FRAME_ARGS_ADDRESS, FRAME_LOCALS_ADDRESS,
5621 FRAME_NUM_ARGS, POP_FRAME, USE_GENERIC_DUMMY_FRAMES, CALL_DUMMY,
5622 CALL_DUMMY_START_OFFSET, CALL_DUMMY_BREAKPOINT_OFFSET,
5623 CALL_DUMMY_LOCATION, FIX_CALL_DUMMY, CALL_DUMMY_ADDRESS,
5624 TARGET_READ_FP, PUSH_RETURN_ADDRESS, PUSH_DUMMY_FRAME,
5625 SAVE_DUMMY_FRAME_TOS, PUSH_ARGUMENTS, PC_IN_CALL_DUMMY,
5626 REG_STRUCT_HAS_ADDR, USE_STRUCT_CONVENTION, GET_SAVED_REGISTER):
5627 Delete definitions. We register gdbarch methods for these now.
5628 (struct frame_info, struct type, struct value): Delete forward
5629 declarations of these types; they're no longer necessary, since we
5630 don't have function declarations here any more.
5631 * mn10300-tdep.c: #include "arch-utils.h", to get declarations for
5632 some default gdbarch methods.
5633 (mn10300_store_struct_return): Return void, as expected by
5635 (mn10300_init_extra_frame_info): Take initial `fromleaf' argument,
5636 as expected by gdbarch.
5637 (mn10300_frame_init_saved_regs): Provide dummy definition for
5638 this, as required by gdbarch.
5639 (mn10300_gdbarch_init): Add mn10300_call_dummy_words, as expected
5640 by gdbarch. Register gdbarch methods or values for all the stuff
5641 removed from tm-10300.h, listed above.
5645 * cli-out.c (cli_begin, cli_end): Replace cli_list_begin and
5647 (cli_ui_out_impl): Update.
5649 * ui-out.c (default_begin, default_end): Replace
5650 default_list_begin and default_list_end.
5651 (default_ui_out_impl): Update.
5652 (uo_begin, uo_end): Replace ou_list_begin and uo_list_end.
5653 (ui_out_begin, ui_out_end): Replace ui_out_list_begin and
5655 (ui_out_list_begin, ui_out_list_end): New. Compatibility
5657 (struct ui_out_level): Add field type.
5658 (push_level, pop_level): Update. Add type parameter.
5660 * ui-out.h (enum ui_out_type): Declare.
5661 (ui_out_begin, ui_out_end): Declare.
5662 (ui_out_begin_ftype, ui_out_end_ftype): Replace list_begin_ftype
5664 (struct ui_out_impl): Update.
5668 * ui-out.h (list_begin_ftype, list_end_ftype): Rename argument
5669 ``list_flag'' to ``depth''.
5670 * ui-out.c (default_list_begin, default_list_end): Update.
5671 (uo_list_begin, uo_list_end): Update.
5672 (MAX_UI_OUT_LEVELS): Define.
5673 (struct ui_out_level): Define.
5674 (top-level): Include "gdb_assert.h".
5675 (struct ui_out): Add fields ``level'' and ``levels''. Delete
5676 fields ``list_flag'' and ``field_count''.
5677 (ui_out_new): Update.
5678 (verify_field_proper_position): Update.
5679 (current_level, push_level, pop_level): New functions.
5680 (ui_out_list_begin): Use push_level.
5681 (ui_out_list_end): Use pop_level.
5682 (ui_out_field_int): Use current_level.
5683 (ui_out_field_skip): Ditto.
5684 (ui_out_field_fmt): Ditto.
5688 * language.c (longest_local_hex_string_custom): Strlen test is
5689 inverted -- reverse the sense of the test.
5693 * config/i386/tm-i386v.h (struct frame_info, struct
5694 frame_saved_regs): Remove declarations.
5695 (i386_frame_num_args): Remove prototype.
5699 * MAINTAINERS: I'm no longer actively maintaining the mn10300
5704 * main.c (captured_main): Delete #ifndef _WIN32 conditional for
5709 * inferior.h (save_inferior_ptid): Declare.
5710 * infrun.c (save_inferior_ptid, restore_inferior_ptid): Define.
5712 * hpux-thread.c (save_inferior_ptid, restore_inferior_ptid):
5713 Delete these functions.
5714 * lin-lwp.c (save_inferior_ptid, restore_inferior_ptid): Likewise.
5715 * lin-thread.c (save_inferior_ptid, restore_inferior_ptid): Likewise.
5716 * linux-thread.c (save_inferior_ptid, restore_inferior_ptid):
5718 * proc-service.c (save_inferior_ptid, restore_inferior_ptid):
5720 * sol-thread.c (save_inferior_ptid, restore_inferior_ptid): Likewise.
5721 * thread-db.c (save_inferior_ptid, restore_inferior_ptid): Likewise.
5723 * somsolib.c (reset_inferior_ptid): Delete.
5724 (som_solib_remove_inferior_hook): Use save_inferior_ptid() to
5725 build the cleanup struct.
5727 * breakpoint.c (reattach_breakpoints, detach_breakpoints): Use
5728 a cleanup to save/restore inferior_ptid.
5732 Implement attach/detach for multi-threaded programs on Linux.
5733 * thread-db.c (keep_thread_db): Adjust comment.
5734 (deactivate_target): Removed.
5735 (thread_db_new_objfile): Don't call deactivate_target. Implement
5736 guts of deactivate_target inline instead.
5737 (attach_thread): Call ATTACH_LWP unconditionally if defined.
5738 (thread_db_attach): New function.
5739 (thread_db_detach): Don't call deactivate_target. Do necessary
5740 cleanup inline instead. Set inferior_ptid to LWP corresponding to
5741 the current user-level thread.
5742 (thread_db_kill): Set inferior_ptid to LWP corresponding to the
5743 current user-level thread.
5744 (thread_db_create_inferior): Deactivate target vector if
5745 KEEP_THREAD_DB is zero.
5746 (thread_db_mourn_inferior): Don't call deactivate_target. Do
5747 necessary cleanup inline instead.
5748 (init_thread_db_ops): Initialize to_attach field to
5750 * lin-lwp.c (lin_lwp_mourn_inferior): Remove prototype.
5751 (stop_wait_callback): Add prototype.
5752 (init_lwp_list): Add comment about when to re-initialize the LWP
5754 (lin_lwp_attach_lwp): Only call ptrace for cloned processes.
5755 Avoid adding publicates to the LWP list. Only mark an LWP as
5756 signalled if it doesn't correspond to a cloned process.
5757 (lin_lwp_attach): Add initial process to the LWP list. Make sure
5758 it's stopped and fake a SIGSTOP.
5759 (detach_callback): New function.
5760 (lin_lwp_detach): Implement.
5761 (lin_lwp_create_inferior): Don't re-initialize LWP list here.
5762 Call child_ops.to_create_inferior directly instead of via
5763 target_beneath local.
5764 (lin_lwp_mourn_inferior): Call child_ops.to_mourn_inferior
5765 directly instead of via target_beneath local.
5769 * symtab.c (lookup_symtab_1, lookup_partial_symtab): Use basename
5770 instead of non-portable search for `/'. Use FILENAME_CMP instead
5771 of STREQ, to account for case-insensitive filesystems.
5772 (top-level): #include "filenames.h".
5776 * breakpoint.c (check_duplicates): Use the breakpoint's type, not
5777 its address, to decide whether it's a watchpoint or not. Zero
5778 is a valid code address.
5779 (update_breakpoints_after_exec): Admonishing comments.
5780 * breakpoint.h (struct breakpoint): Doc fixes.
5782 * breakpoint.c (check_duplicates): Take a breakpoint object as an
5783 argument, rather than an address and section. All callers changed.
5787 * defs.h (ptid_t): New typedef.
5788 (pid_to_ptid, null_ptid, minus_one_ptid, ptid_equal): New macros.
5790 * a68v-nat.c, alphabsd-nat.c, arch-utils.c, arm-linux-nat.c,
5791 blockframe.c, breakpoint.c, breakpoint.h,
5792 config/i386/nm-i386sol2.h, config/i386/tm-i386sco5.h,
5793 config/ia64/nm-linux.h, config/m68k/nm-hp300bsd.h,
5794 config/mips/nm-irix4.h, config/mips/nm-irix5.h,
5795 config/pa/nm-hppah.h, config/pa/tm-hppa.h,
5796 config/rs6000/nm-rs6000.h, config/sparc/nm-sun4sol2.h,
5797 corelow.c, cxux-nat.c, d10v-tdep.c, dink32-rom.c,
5798 dve3900-rom.c, fork-child.c, frame.c, gnu-nat.c, go32-nat.c,
5799 hp300ux-nat.c, hppa-tdep.c, hppab-nat.c, hppah-nat.c,
5800 hpux-thread.c, i386-linux-nat.c, i386aix-nat.c, i386b-nat.c,
5801 i386bsd-nat.c, i386gnu-nat.c, i386mach-nat.c, i386nbsd-nat.c,
5802 infcmd.c, inferior.h, inflow.c, infptrace.c, infrun.c,
5803 inftarg.c, infttrace.c, lin-lwp.c, lin-thread.c,
5804 linux-thread.c, lynx-nat.c, m3-nat.c, m32r-rom.c,
5805 m68knbsd-nat.c, m88k-nat.c, mac-nat.c, mips-nat.c,
5806 mon960-rom.c, monitor.c, ns32knbsd-nat.c, ocd.c, ppc-bdm.c,
5807 ppcnbsd-nat.c, proc-service.c, procfs.c, ptx4-nat.c,
5808 regcache.c, remote-adapt.c, remote-array.c, remote-bug.c,
5809 remote-e7000.c, remote-es.c, remote-mips.c, remote-mm.c,
5810 remote-nindy.c, remote-os9k.c, remote-rdi.c, remote-rdp.c,
5811 remote-sds.c, remote-sim.c, remote-st.c, remote-udi.c,
5812 remote-vx.c, remote.c, rs6000-nat.c, sol-thread.c,
5813 solib-aix5.c, solib-svr4.c, somsolib.c, sparc-nat.c,
5814 standalone.c, sun3-nat.c, sun386-nat.c, symm-nat.c, target.c,
5815 target.h, thread-db.c, thread.c, top.c, ultra3-nat.c,
5816 uw-thread.c, v850ice.c, win32-nat.c, wince.c, xcoffsolib.c
5817 (inferior_pid): Rename to inferior_ptid everywhere - even in
5818 comments and obsolete ports. In cases where this variable
5819 really is supposed to be used as a process id, use PIDGET() to
5820 extract the process id component from inferior_ptid. The
5821 other cases, either involving other variables whose types had
5822 to be changed or functions whose signatures had to changed
5823 are listed separately below.
5825 * arm-linux-nat.c (get_thread_id): Change type of argument
5826 representing a combined process/thread id from ``int'' to
5827 ``ptid_t''. Also change parameter name to ptid.
5828 * breakpoint.h, breakpoint.c (breakpoint_thread_match): Likewise.
5829 * corelow.c (core_file_thread_alive): Likewise.
5830 * d10v-tdep.c (d10v_read_pc, d10v_write_pc): Likewise.
5831 * defs.h (*target_wait_hook): Likewise.
5832 * gdbthread.h (thread_info, delete_thread, pid_to_thread_id)
5833 (find_thread_pid, save_infrun_state, load_infrun_state): Likewise.
5834 * gnu-nat.c (gnu_thread_alive, gnu_pid_to_str, gnu_wait)
5835 (gnu_resume): Likewise.
5836 * go32-nat.c (go32_wait, go32_resume): Likewise.
5837 * h8500-tdep.c (h8500_read_pc, h8500_write_pc): Likewise.
5838 * hppa-tdep.c (target_read_pc, target_write_pc): Likewise.
5839 * hppah-nat.c (child_pid_to_str, hppa_tid_to_str,
5840 (hppa_pid_or_tid_to_str, child_post_startup_inferior)
5841 (child_thread_alive): Likewise.
5842 * hpux-thread.c (hpux_thread_notice_signals, hpux_thread_alive)
5843 (hpux_pid_to_str, hpux_thread_wait, hpux_thread_resume): Likewise.
5844 * i386-linux-nat.c (child_resume): Likewise.
5845 * ia64-linux-nat.c (enable_watchpoints_in_psr, fetch_debug_register)
5846 (store_debug_register, fetch_debug_register_pair)
5847 (store_debug_register_pair, ia64_linux_insert_watchpoint)
5848 (ia64_linux_remove_watchpoint, ia64_linux_stopped_by_watchpoint):
5850 * ia64-tdep.c (ia64_read_pc, ia64_write_pc): Likewise.
5851 * inferior.h (read_pc_pid, generic_target_read_pc, write_pc_pid)
5852 (generic_target_write_pc, ptrace_wait, child_resume)
5853 (get_last_target_status): Likewise.
5854 * infptrace.c (ptrace_wait, child_resume): Likewise.
5855 * inftarg.c (child_wait, child_post_wait, child_thread_live)
5856 (child_pid_to_str): Likewise.
5857 * infttrace.c (ptrace_wait, child_thread_alive, child_resume)
5858 (hppa_pid_or_tid_to_str, child_post_startup_inferior): Likewise.
5859 * lin-lwp.c (add_lwp, delete_lwp, find_lwp_pid, lin_lwp_attach_lwp)
5860 (lin_lwp_resume, lin_lwp_wait, lin_lwp_thread_alive)
5861 (lin_lwp_pid_to_str): Likewise.
5862 * lin-thread.c (thread_db_alive, thread_db_pid_to_str)
5863 (thread_db_resume, thread_db_wait): Likewise.
5864 * linux-thread.c (linuxthreads_thread_alive, linuxthreads_pid_to_str)
5865 (linuxthreads_resume, linuxthreads_wait): Likewise.
5866 * lynx-nat.c (child_wait, child_thread_alive, child_resume)
5867 (child_pid_to_str): Likewise.
5868 * m3-nat.c (mach_really_wait, m3_resume): Likewise.
5869 * mac-nat.c (child_wait, child_resume): Likewise.
5870 * mips-tdep.c (mips_read_pc): Likewise.
5871 * monitor.c (monitor_wait, monitor_resume): Likewise.
5872 * ocd.c, ocd.h (ocd_thread_alive, ocd_resume): Likewise.
5873 * ppc-bdm.c (bdm_ppc_wait): Likewise.
5874 * procfs.c (do_attach, procfs_wait, procfs_resume)
5875 (procfs_notice_signals, procfs_thread_alive, procfs_pid_to_str)
5876 (procfs_set_watchpoint, procfs_stopped_by_watchpoint)
5877 (procfs_find_LDT_entry): Likewise.
5878 * regcache.c (read_register_pid, read_signed_register_pid)
5879 (write_register_pid, generic_target_read_pc, read_pc_pid)
5880 (generic_target_write_pc, write_pc_pid): Likewise.
5881 * regcache.h (read_register_pid, read_signed_register_pid)
5882 (write_register_pid): Likewise.
5883 * remote-adapt.c (adapt_wait, adapt_resume): Likewise.
5884 * remote-array.c (array_wait, array_resume): Likewise.
5885 * remote-bug.c (bug_wait, bug_resume): Likewise.
5886 * remote-e7000.c (e7000_wait, e7000_resume): Likewise.
5887 * remote-eb.c (eb_wait, eb_resume): Likewise.
5888 * remote-es.c (es1800_wait, es1800_resume): Likewise.
5889 * remote-mips.c (mips_wait, mips_resume): Likewise.
5890 * remote-mm.c (mm_wait, mm_resume): Likewise.
5891 * remote-nindy.c (nindy_wait, nindy_resume): Likewise.
5892 * remote-os9k.c (rombug_wait, rombug_resume): Likewise.
5893 * remote-rdi.c (arm_rdi_wait, arm_rdi_resume): Likewise.
5894 * remote-rdp.c (remote_rdp_resume, remote_rdp_wait): Likewise.
5895 * remote-sds.c (sds_wait, sds_resume): Likewise.
5896 * remote-sim.c (gdbsim_wait, gdbsim_resume): Likewise.
5897 * remote-st.c (st2000_wait, st2000_resume): Likewise.
5898 * remote-udi.c (udi_wait, udi_resume): Likewise.
5899 * remote-vx.c (vx_wait, vx_resume): Likewise.
5900 * remote.c (remote_current_thread, remote_resume, remote_wait)
5901 (remote_async_resume, remote_async_wait, remote_cisco_wait)
5902 (remote_thread_alive): Likewise.
5903 * sol-thread.c (thread_to_lwp, lwp_to_thread, sol_thread_resume)
5904 (sol_thread_wait, sol_thread_notice_signals, sol_thread_alive)
5905 (solaris_pid_to_str): Likewise.
5906 * symm-nat.c (child_wait, child_resume): Likewise.
5907 * target.c (debug_to_resume, debug_to_wait, debug_to_post_wait)
5908 (debug_to_notice_signals, debug_to_thread_alive)
5909 (normal_target_post_startup_inferior, normal_pid_to_str)
5910 (debug_to_post_startup_inferior): Likewise.
5911 * target.h (to_resume, to_wait, to_post_wait)
5912 (to_post_startup_inferior, to_notice_signals, to_thread_alive)
5913 (to_pid_to_str [all in struct target_ops]): Likewise.
5914 (child_post_wait, child_thread_alive, normal_pid_to_str): Likewise.
5915 * thread-db.c (thread_from_lwp, lwp_from_thread, thread_db_wait)
5916 (attach_thread, detach_thread, thread_db_resume, check_event)
5917 (thread_db_post_startup_inferior, thread_db_thread_alive)
5918 (thread_db_pid_to_str): Likewise.
5919 * thread.c (add_thread, delete_thread, find_thread_pid)
5920 (pid_to_thread_id, in_thread_list, load_infrun_state)
5921 (save_infrun_state, switch_to_thread, restore_current_thread)
5922 (make_cleanup_restore_current_thread): Likewise.
5923 * top.c (target_wait_hook): Likewise.
5924 * uw-thread.c (dbgpid, thr_to_lwp, lwp_to_thr, add_thread_uw)
5925 (uw_thread_resume, libtrhead_stub, uw_thread_wait, uw_thread_alive)
5926 (uw_thread_pid_to_str): Likewise.
5927 * v850ice.c (v850ice_wait, v850ice_resume): Likewise.
5928 * win32-nat.c (child_wait, child_resume, win32_child_thread_alive)
5929 (cywin_pid_to_str): Likewise.
5930 * wince.c (child_wait, child_resume, win32_child_thread_alive):
5932 * config/nm-linux.h (linuxthreads_pid_to_str): Likewise.
5933 * config/nm-lynx.h (child_wait, lynx_pid_to_str): Likewise.
5934 * config/alpha/nm-linux.h (lin_lwp_attach_lwp): Likewise.
5935 * config/arm/nm-linux.h (lin_lwp_attach_lwp): Likewise.
5936 * config/h8500/tm-h8500.h (h8500_read_pc, h8500_write_pc): Likewise.
5937 * config/i386/nm-i386sol2.h (procfs_stopped_by_watchpoint)
5938 (procfs_set_watchpoint): Likewise.
5939 * config/i386/nm-linux.h (lin_lwp_attach_lwp): Likewise.
5940 * config/i386/nm-ptx4.h (child_wait): Likewise.
5941 * config/i386/nm-symmetry.h (child_wait): Likewise.
5942 * config/i386/tm-cygwin.h (cygwin_pid_to_str): Likewise.
5943 * config/ia64/nm-linux.h (ia64_linux_stopped_by_watchpoint)
5944 (ia64_linux_insert_watchpoint, ia64_linux_remove_watchpoint)
5945 (lin_lwp_attach_lwp): Likewise.
5946 * config/mips/nm-irix4.h, config/mips/nm-irix5.h
5947 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Likewise.
5948 * config/pa/nm-hppah.h (child_pid_to_str, hppa_tid_to_str)
5949 (hppa_pid_or_tid_to_str): Likewise.
5950 * config/pa/tm-hppa.h (target_read_pc, target_write_pc): Likewise.
5951 * config/powerpc/nm-linux.h (lin_lwp_attach_lwp): Likewise.
5952 * config/sparc/nm-sun4sol2.h (procfs_stopped_by_watchpoint)
5953 (procfs_set_watchpoint): Likewise.
5955 * gdbthread.h (thread_id_to_pid): Change return type which
5956 represents a combined process/thread id from ``int'' to
5958 * gnu-nat.c (gnu_wait): Likewise.
5959 * go32-nat.c (go32_wait): Likewise.
5960 * hpux-thread.c (hpux_thread_wait): Likewise.
5961 * inferior.h (procfs_first_available): Likewise.
5962 * inftarg.c (child_wait): Likewise.
5963 * infttrace.c (ptrace_wait): Likewise.
5964 * lin-lwp.c (lin_lwp_wait): Likewise.
5965 * lin-thread.c (thread_db_wait): Likewise.
5966 * linux-thread.c (linuxthreads_wait): Likewise.
5967 * lynx-nat.c (child_wait): Likewise.
5968 * m3-nat.c (mach_really_wait): Likewise.
5969 * mac-nat.c (child_wait): Likewise.
5970 * monitor.c (monitor_wait): Likewise.
5971 * ppc-bdm.c (bdm_ppc_wait): Likewise.
5972 * procfs.c (do_attach, procfs_wait, procfs_first_available): Likewise.
5973 * remote-adapt.c (adapt_wait): Likewise.
5974 * remote-array.c (array_wait): Likewise.
5975 * remote-bug.c (bug_wait): Likewise.
5976 * remote-e7000.c (e7000_wait): Likewise.
5977 * remote-eb.c (eb_wait): Likewise.
5978 * remote-es.c (es1800_wait): Likewise.
5979 * remote-mips.c (mips_wait): Likewise.
5980 * remote-mm.c (mm_wait): Likewise.
5981 * remote-nindy.c (nindy_wait): Likewise.
5982 * remote-os9k (rombug_wait): Likewise.
5983 * remote-rdi.c (arm_rdi_wait): Likewise.
5984 * remote-rdp.c (remote_rdp_wait): Likewise.
5985 * remote-sds.c (sds_wait): Likewise.
5986 * remote-sim.c (gdbsim_wait): Likewise.
5987 * remote-st.c (st2000_wait): Likewise.
5988 * remote-udi.c (udi_wait): Likewise.
5989 * remote-vx.c (vx_wait): Likewise.
5990 * remote.c (remote_wait, remote_async_wait, remote_current_thread)
5991 (remote_cisco_wait): Likewise.
5992 * sol-thread.c (thread_to_lwp, lwp_to_thread, sol_thread_wait):
5994 * symm-nat.c (child_wait): Likewise.
5995 * target.c (debug_to_wait): Likewise.
5996 * target.h (to_wait [in struct target_ops]): Likewise.
5997 * thread.c (thread_id_to_pid): Likewise.
5998 * thread-db.c (thread_from_lwp, lwp_from_thread, thread_db_wait):
6000 * top.c (*target_wait_hook): Likewise.
6001 * uw-thread.c (lwp_to_thr, uw_thread_wait): Likewise.
6002 * v850ice.c (v850ice_wait): Likewise.
6003 * win32-nat.c (child_wait): Likewise.
6004 * wince.c (child_wait): Likewise.
6005 * config/nm-lynx.h (child_wait): Likewise.
6006 * config/i386/nm-ptx4.h (child_wait): Likewise.
6007 * config/i386/nm-symmetry.h (child_wait): Likewise.
6009 * arch-utils.c (generic_prepare_to_proceed): Rename wait_pid
6010 to wait_ptid and change its type from ``int'' to ``ptid_t''.
6011 * breakpoint.c (reattach_breakpoints, detach_breakpoints): Likewise,
6012 but rename saved_inferior_pid to saved_inferior_ptid.
6013 * d10v-tdep.c (d10v_read_pc, d10_write_pc): Likewise, but rename
6014 save_pid to save_ptid.
6015 * gdbthread.h (struct thread_info): Likewise, but rename pid to ptid.
6016 * hppah-nat.c (child_pid_to_exec): Likewise, but rename
6017 saved_inferior_pid to saved_inferior_ptid.
6018 * hpux-thread.c (main_ptid): Likewise, but rename from main_pid.
6019 * infrun.c (previous_inferior_pid [static global]): Likewise,
6020 but rename to previous_inferior_ptid.
6021 (resume): Likewise, but rename resume_pid to resume_ptid.
6022 (struct execution_control_state): Likewise, but rename
6023 pid to ptid, saved_inferior_pid to saved_inferior_ptid,
6024 and waiton_pid to waiton_ptid.
6025 (target_last_wait_pid): Likewise, but rename to
6026 target_last_wait_ptid.
6027 * infttrace.c (saved_real_pid): Likewise, but rename to
6029 (child_pid_to_exec_file): Likewise, but rename saved_inferior_pid
6030 to saved_inferior_ptid.
6031 * lin-lwp.c (struct lwp_info): Likewise, but rename pid to ptid.
6032 (trap_ptid): Likewise, but renamed from trap_pid.
6033 * lin-thread.c (handle_new_thread): Likewise, but rename gdb_pid
6035 * linux-thread.c (detach_thread): Likewise, but rename pid to ptid.
6036 (thread_db_wait): Likewise, but rename ret_pid to retptid.
6037 * procfs.c (procfs_wait): Likewise, for retval whose name
6038 doesn't change. Also, ``temp'' becomes two separate variables,
6039 one named temp_tid (an int) and the other temp_ptid.
6040 (procfs_notice_thread): Likewise (type change) for gdb_threadid
6041 whose name does not change.
6042 * regcache.c (registers_ptid): Likewise, but renamed from
6044 (read_register_pid, read_signed_register_pid, write_register_pid):
6045 Likewise, but rename save_pid to save_ptid.
6046 (read_pc_pid, write_pc_pid): Likewise, but rename saved_inferior_pid
6047 to saved_inferior_ptid.
6048 * remote.c (remote_newthread_step): Likewise, but rename pid to ptid.
6049 * sol-thread.c (struct ps_prochandle): Likewise.
6050 (sol_thread_resume): Likewise, for save_pid which becomes save_ptid.
6051 (sol_thread_wait): Likewise, for rtnval whose name does not
6052 change, and for save_pid which becomes save_ptid.
6053 (solaris_pid_to_str): Likewise for lwp whose name does not change.
6054 (sol_find_new_threads_callback): Likewise, for pid which becomes
6056 * target.h (target_resume, target_wait, target_post_wait)
6057 (target_post_startup_inferior, target_notice_signals)
6058 (target_thread_alive): Likewise.
6059 * thread.c (info_threads_command): Likewise, but rename
6060 current_pid to current_ptid.
6061 (struct current_thread_cleanup): Likewise, but rename field
6062 inferior_pid to inferior_ptid.
6063 * thread-db.c (find_new_threads_callback): Likewise, but rename
6065 * uw-thread.c (thr_to_lwp): Likewise for lid whose name does not
6067 (lwp_to_tr): Likewise fo tid whose name remains unchanged.
6068 (thr_infpid, lwp_infpid, notice_thread, libthread_stub): Likewise,
6069 but rename pid to ptid.
6070 * config/alpha/nm-linux.h (ATTACH_LWP): Likewise.
6071 * config/arm/nm-linux.h (ATTACH_LWP): Likewise.
6072 * config/i386/nm-linux.h (ATTACH_LWP): Likewise.
6073 * config/ia64/nm-linux.h (ATTACH_LWP): Likewise.
6074 * config/pa/nm-hppah.h (target_tid_to_str): Likewise.
6075 * config/powerpc/nm-linux.h (ATTACH_LWP): Likewise.
6077 * arch-utils.c (generic_prepare_to_proceed): Test for the
6078 "zero" ptid by using ptid_equal() to test to see if variable
6079 in question is the same as null_ptid. This replaces a direct
6081 * cxux-nat.c (add_shared_symbol_files): Likewise.
6082 * i386aix-nat.c, i386b-nat.c (i386_float_info): Likewise.
6083 * infcmd.c (run_command): Likewise.
6084 * inflow.c (kill_command): Likewise.
6085 * infttrace.c (call_ttrace): Likewise.
6086 * lin-lwp.c (lin_lwp_prepare_to_proceed): Likewise.
6087 * lin-thread.c (thread_db_kill): Likewise.
6088 * procfs.c (procfs_kill_inferior, procfs_mourn_inferior): Likewise.
6089 * remote-es.c (es1800_kill): Likewise.
6090 * sol-thread.c (sol_thread_create_inferior): Likewise.
6091 * solib.c (locate_base): Likewise.
6092 * target.c (nosupport_runtime): Likewise.
6093 * thread-db.c (thread_db_wait): Likewise.
6094 * top.c (quit_confirm, quit_force): Likewise.
6095 * uw-thread (lwp_infpid, uw_thread_resume): Likewise.
6097 * infrun.c (handle_inferior_event, stop_stepping, normal_stop):
6098 Use ptid_equal to compare value of process/thread ids instead of
6099 ``=='' and ``!='' operators.
6100 lin-lwp.c (delete_lwp, lin_lwp_prepare_to_proceed)
6101 (stop_wait_callback, lin_lwp_wait): Likewise.
6102 * procfs.c (procfs_wait): Likewise.
6103 * regcache.c (read_register_bytes, read_register_gen)
6104 (write_register_gen, read_register, read_register_pid)
6105 (read_signed_register, read_signed_register_pid, write_register)
6106 (write_register_pid, supply_register): Likewise.
6107 * remote-vx.c (vx_resume): Likewise.
6108 * sol-thread.c (sol_thread_wait): Likewise.
6109 * symm-nat.c (kill_inferior): Likewise.
6110 * thread.c (delete_thread, find_thread_pid, pid_to_thread_id)
6111 (in_thread_list, info_threads_command, switch_to_thread)
6112 (restore_current_thread): Likewise.
6113 * uw-thread (libtread_stub): Likewise.
6115 * arm-linux-nat.c (GET_THREAD_ID): Change PID to PTID.
6117 * corelow.c (add_to_thread_list): Convert argument in add_thread()
6119 * gnu-nat.c (inf_validate_procs): Likewise.
6120 * linux-thread.c (stop_thread, update_stop_threads): Likewise.
6121 * remote.c (record_currthread, remote_threads_info): Likewise.
6122 * win32-nat.c (child_add_thread): Likewise.
6124 * hpux-thread.c (save_inferior_pid, restore_inferior_pid): Rename,
6125 respectively, to save_inferior_ptid() and restore_inferior_ptid().
6126 Adjust implementations to operate on ``ptid_t'' instead of ``int''.
6127 * lin-lwp.c (save_inferior_pid, restore_inferior_pid): Likewise.
6128 * lin-thread.c (save_inferior_pid, restore_inferior_pid): Likewise.
6129 * linux-thread.c (save_inferior_pid, restore_inferior_pid): Likewise.
6130 * proc-service.c (save_inferior_pid, restore_inferior_pid): Likewise.
6131 * sol-thread.c (save_inferior_pid, restore_inferior_pid): Likewise.
6132 * thread-db.c (save_inferior_pid, restore_inferior_pid): Likewise.
6134 * infrun.c (RESUME_ALL): New macro representing the -1 ptid
6135 to be passed to target_resume() when all threads should resume.
6136 (resume): Set resume_ptid to RESUME_ALL rather than -1.
6137 (handle_inferior_event): Invoke target_resume() with RESUME_ALL
6139 * irix5-nat.c (solib_create_inferior_hook): Convert -1 to
6140 a ptid_t in target_resume() call.
6141 * osfsolib.c (solib_create_inferior_hook): Likewise.
6142 * solib-svr4.c (solib_create_inferior_hook): Likewise.
6144 * lin-lwp.c (PIDGET, PIDGET0): Rename original PIDGET macro to
6145 PIDGET0. Define new PIDGET macro which uses PIDGET0, the only
6146 difference being that the 0xffff pattern will be interpreted
6148 * lin-thread.c (PIDGET, PIDGET0): Likewise.
6149 * thread-db.c (PIDGET, PIDGET0): Likewise.
6150 * config/nm-linux.h (PIDGET, PIDGET0): Likewise.
6151 * config/i386/tm-i386sol2.h (PIDGET, PIDGET0): Likewise.
6152 * config/i386/tm-i386v42mp.h (PIDGET, PIDGET0): Likewise.
6153 * config/sparc/tm-sun4sol2.h (PIDGET, PIDGET0): Likewise.
6155 * m3-nat.c (init_m3_ops): Fix typo; initialize to_wait field to
6156 mach_really_wait rather than mach_really__wait.
6157 * lin-thread.c (check_for_thread_event): Fix warning; make function
6158 actually return a value.
6160 * gdbarch.sh (TARGET_READ_PC, TARGET_WRITE_PC): Change type of
6161 ``pid'' arguments from ``int'' to ``ptid_t''. Also renamed
6163 * gdbarch.h, gdbarch.c: Regenerated.
6167 * rdi-share/devsw.c: Include <time.h> for struct tm
6171 * config/djgpp/fnchange.lst: Add mappings for the new
6172 opcodes/openrisc-* files.
6176 * lin-lwp.c: Change printf to fprintf_unfiltered.
6177 * Makefile.in: Add rules for thread-db.o, lin-lwp.o, proc-service.o.
6181 * config/rs6000/tm-rs6000.h (IN_SOLIB_RETURN_TRAMPOLINE): Define.
6182 (rs6000_in_solib_return_trampoline): Declare.
6183 * rs6000-tdep.c (rs6000_in_solib_return_trampoline): New
6185 (rs6000_skip_trampoline_code): Skip bigtoc fixup code.
6186 * xcoffread.c (read_xcoff_symtab): Perform the ISFCN function
6187 check after the CSECT check rather than before it. Allocate
6188 separate symtabs for CSECTs whose names begin with '@'.
6189 (scan_xcoff_symtab): Don't ignore symbols beginning with '@'.
6190 Activate the misc_func_recorded mechanism for whose names begin
6195 * ppcnbsd-nat.c (fetch_inferior_registers)
6196 (store_inferior_registers, fetch_core_registers): Changed to use
6197 fpreg[] instead of r_regs[] to access floating point registers.
6201 * sh-tdep.c: Get rid of the function prototypes.
6202 (sh_sh4_build_float_register_type): Move earlier in file.
6203 (fv_reg_base_num): Ditto.
6204 (dr_reg_base_num): Ditto.
6208 * thread-db.c: Revert 2001-04-26 change for debugging output.
6210 * lin-lwp.c: Add set/show debug lin-lwp command. Use this
6211 command to turn extra debugging output on / off.
6215 * buildsym.c (start_subfile): Use FILENAME_CMP instead of STREQ.
6216 (top-level): #include filenames.h.
6218 * dwarf2read.c (dwarf2_start_subfile): Use IS_ABSOLUTE_PATH and
6219 FILENAME_CMP, to DTRT on non-Posix platforms.
6220 (top-level): #include filenames.h.
6225 * gdbtypes.c (check_stub_method): Always initialize ``p''.
6229 * configure.host: Delete romp host.
6234 * TODO: Updates to 5.1. No more targets to obsolete.
6238 (Changes from Kevin Buettner, with minor update by Don Howard.)
6240 * i387-nat.c (i387_supply_fxsave, i387_fill_fxsave, i387_tag): Fix
6241 typos in which hexadecimal constants were really intended to be
6243 (i387_tag): Swap logic regarding zero vs non-zero exponents.
6244 * MAINTAINERS (Misc): Added myself to the write-after-approval
6249 (Changes from Daniel Berlin, with revisions by Jim Blandy.)
6251 Abstract out operations specific to particular C++ ABI's, and
6252 invoke them through a function table. This removes the C++ ABI
6253 dependencies scattered throughout the code, and allows us to
6254 cleanly add support for new C++ ABI's.
6255 * cp-abi.h, cp-abi.h, gnu-v2-abi.c, hpacc-abi.c: New files.
6256 * c-typeprint.c, c-valprint.c, dbxread.c, eval.c, gdbtypes.c,
6257 jv-typeprint.c, linespec.c, symtab.c, typeprint.c, valops.c:
6258 #include "cp-abi.h". These files all use functions now declared
6260 * symtab.h (OPNAME_PREFIX_P, VTBL_PREFIX_P, DESTRUCTOR_PREFIX_P):
6261 Deleted. These services are now provided by functions declared in
6263 * value.h (value_rtti_type, value_virtual_fn_field): Same.
6264 * values.c (value_virtual_fn_field): Same, for this definition.
6265 * valops.c (value_rtti_type): Same.
6266 * c-typeprint.c (c_type_print_base): Use the functions from
6267 "cp-abi.h", instead of the old macros, or hard-coded ABI-specific
6269 * dbxread.c (record_minimal_symbol): Same.
6270 * gdbtypes.c (get_destructor_fn_field, virtual_base_index,
6271 virtual_base_index_skip_primaries): Same.
6272 * jv-typeprint.c (java_type_print_base): Same.
6273 * linespec.c (find_methods, decode_line_1): Same.
6274 * symtab.c (gdb_mangle_name): Same.
6275 * Makefile.in (SFILES): Add the new .c files mentioned above.
6276 (cp_abi_h): New variable.
6277 (COMMON_OBS): Add gnu-v2-abi.o, hpacc-abi.o, and cp-abi.o.
6278 (cp-abi.o, gnu-v2-abi.o, hpacc-abi.o): New targets.
6279 (c-typeprint.o, c-valprint.o, dbxread.o, eval.o, gdbtypes.o,
6280 jv-typeprint.o, symtab.o, linespec.o, typeprint.o, valops.o): Add
6281 dependency on $(cp_abi_h).
6285 * thread-db.c (_initialize_thread_db): Add set/show command
6286 "debug-linux-threads" for debugging output.
6287 * lin-lwp.c (various): Use global "debug_linux_threads to
6288 turn on extra debugging output.
6289 * lin-lwp.c: Minor cleanups in comments.
6290 * target.c (normal_pid_to_str): Get rid of an ancient hack.
6291 * remote.c (remote_pid_to_str): New function for remote target.
6295 * c-typeprint.c (c_type_print_cv_qualifier): Don't print `const'
6296 qualifier on C++ references; all references are innately const.
6300 * event-top.h: Fix formatting.
6304 * source.c (openp): Obsolete #ifdef MPW code.
6305 (open_source_file): Ditto.
6306 * event-top.c (display_gdb_prompt): Ditto.
6307 * utils.c (query): Ditto.
6308 (init_page_info): Ditto.
6309 (init_page_info): Delete #ifndef MPW.
6310 * top.c (gdb_readline): Ditto.
6311 * mac-xdep.c: Obsolete.
6312 * mac-gdb.r: Obsolete.
6313 * config/powerpc/xm-mpw.h: Obsolete.
6314 * config/xm-mpw.h: Obsolete.
6315 * mpw-make.sed: Obsolete.
6316 * mpw-config.in: Obsolete.
6322 * i386-tdep.c (i386_frameless_function_invocation): New function.
6323 * config/i386/tm-i386.h (FRAMELESS_FUNCTION_INVOCATION): Redefine
6324 in terms of i386_frameless_function_invocation. Adjust comment.
6325 (i386_frameless_function_invocation): New prototype.
6329 * top.c (gdb_init): Don't call cli_out_new() to
6330 create global uiout if init_ui_hook is set. uiout will
6331 have to be initialized there.
6335 * arch-utils.c: Include "regcache.h".
6339 * i386-tdep.c (i386_saved_pc_after_call): New function.
6340 * config/i386/tm-i386.h (SAVED_PC_AFTER_CALL): Redefine in terms
6341 of i386_saved_pc_after_call.
6342 (i386_saved_pc_after_call): New prototype.
6346 * i386-nat.c: Fix typo in comment.
6347 * solib.c (no_shared_libraries): New function. Discard all symbols
6348 from shared libraries.
6349 (_initialize_solib): Add command "nosharedlibrary" as complement
6350 to the command "sharedlibrary". Unloads symbols for all solibs.
6354 * configure.host (m68030-sony-*, m68*-isi-*, m68*-sony-*):
6355 * configure.tgt (m68*-rom68k-*, m68*-*bug-*, m68*-monitor-*)
6356 (m68*-est-*, m68*-sony-*, m68*-isi-*):
6357 * Makefile.in (xm-news1000.h, tm-news.h, xm-news.h): Obsolete..
6358 * config/m68k/xm-news.h: Obsolete.
6359 * config/m68k/tm-news.h:
6360 * config/m68k/xm-news1000.h: Obsolete.
6361 * config/m68k/news.mh: Obsolete.
6362 * config/m68k/news.mt: Obsolete.
6363 * config/m68k/nm-news.h: Obsolete.
6364 * config/m68k/news1000.mh: Obsolete.
6365 * news-xdep.c: Obsolete.
6366 * Makefile.in (isi-xdep.o): Obsolete.
6367 (ALLDEPFILES): Delete isi-xdep.c.
6368 (tm-isi.h): Obsolete.
6369 * m68k-tdep.c (altos_skip_prologue): Update comments.
6370 (isi_skip_prologue): Obsolete.
6371 * isi-xdep.c: Obsolete.
6372 * config/m68k/xm-isi.h: Obsolete.
6373 * config/m68k/isi.mh: Obsolete.
6374 * config/m68k/tm-isi.h: Obsolete.
6375 * config/m68k/isi.mt: Obsolete.
6382 * remote.c (remote_open_1): On opening the remote target, activate
6383 the solib_create_inferior_hook, so that it can detect when the
6384 target loads shared libraries.
6385 (remote_async_open_1): Ditto.
6389 * breakpoint.c (print_one_breakpoint): Handle 64-bit addresses.
6390 * tracepoint.c (tracepoints_info): Handle 64-bit addresses.
6391 * testsuite/gdb.trace/deltrace.exp: Allow for 64-bit addresses.
6392 * testsuite/gdb.trace/infotrace.exp: Ditto.
6393 * testsuite/gdb.trace/passcount.exp: Ditto.
6394 * testsuite/gdb.trace/while-stepping.exp: Ditto.
6398 * thread-db.c (check_thread_signals): When looping over all
6399 signals, ignore signal zero.
6400 (disable_thread_signals): Ditto.
6404 * thread.c (do_captured_thread_select): Allow the argument to the
6405 thread command to be an expression rather than a literal integer.
6409 * i386-linux-tdep.c (i386_linux_saved_pc_after_call): Use
6410 read_memory_unsigned_integer instead of read_memory_integer.
6414 * solib-aix5.c (map_index_vs_section_name_okay): New function.
6415 (aix5_relocate_main_executable): Don't use file offsets for
6416 determining corresponding sections and map file entries. Call
6417 map_index_vs_section_name_okay() to do this instead.
6421 * procfs.c (open_with_retry): New function.
6422 (open_procinfo_files, load_syscalls, proc_iterate_over_mappings)
6423 (proc_get_LDT_entry): Call open_with_retry() instead of open().
6427 * ia64-linux-nat.c (ia64_linux_stopped_by_watchpoint): Adjust
6428 comparison against TRAP_HWBKPT constant yet again to account
6429 for the various values used by different kernel versions.
6433 * demangle.c (_initialize_demangler): Use xcalloc on the
6434 demangling_style_names, and make it a null terminated array of
6435 names, to avoid a crash.
6439 * i386-tdep.c (i386_frame_chain): New function.
6440 * config/i386/tm-i386.h (FRAME_CHAIN): Redefine in terms of
6442 (i386_frame_chain): New prototype.
6446 * target.h (target_ops): Removed to_core_file_to_sym_file vector
6448 * corelow.c (core_ops): Updated for above change.
6449 * gnu-nat.c (core_ops): Likewise.
6450 * inftarg.c (child_ops): Likewise.
6451 * monitor.c (monitor_ops): Likewise.
6452 * ppc-bdm.c (bdm_ppc_ops): Likewise.
6453 * remote-adapt.c (adapt_ops): Likewise.
6454 * remote-bug.c (bug_ops): Likewise.
6455 * remote-e7000.c (e7000_ops): Likewise.
6456 * remote-eb.c (eb_ops): Likewise.
6457 * remote-es.c (es1800_ops, es1800_child_ops): Likewise.
6458 * remote-mm.c (mm_ops): Likewise.
6459 * remote-nindy.c (nindy_ops): Likewise.
6460 * remote-nrom.c (nrom_ops): Likewise.
6461 * remote-os9k.c (rombug_ops): Likewise.
6462 * remote-rdp.c (remote_rdp_ops): Likewise.
6463 * remote-sim.c (gdbsim_ops): Likewise.
6464 * remote-st.c (st2000_ops): Likewise.
6465 * v850ice.c (v850ice_ops): Likewise.
6466 * target.c (cleanup_target): Likewise
6467 (update_current_target): Likewise.
6468 (setup_target_debug): Likewise
6469 (debug_to_core_file_to_sym_file): Removed.
6471 * corefile.c (core_file_command) [HPUXHPPA]: Removed code that
6472 sets symbol file from information obtained from the core file.
6473 * corelow.c (core_file_to_sym_file): Removed.
6478 Fixed Insight on Solaris. It was not possible to debug a process
6479 because of EINTR "errors".
6480 * procfs.c: (procfs_wait): if proc_wait_for_stop() fails
6481 with EINTR, retry the call.
6485 * solib-aix5.c (enum maptype): Delete.
6486 (struct lm_info): Add new member ``nmappings''. Make ``mapping''
6487 member a pointer instead of a statically sized array.
6488 (build_so_list_from_mapfile): Dynamically allocate ``mapping''
6490 (aix5_relocate_main_executable, aix5_relocate_section_addresses,
6491 aix5_find_global_pointer): Search for correct mapping to use
6492 based on file offset instead of knowledge of whether the section
6493 is read-only or read/write.
6494 (aix5_find_gate_addresses): Use the first mapping instead of
6495 the (now defunct) MT_READONLY mapping.
6499 * xcoffread.c (scan_xcoff_symtab): Ignore symbols beginning with
6504 * config/i386/fbsd.mh (NATDEPFILES): Add i386-nat.o.
6508 Obsolete i[3456]86-*-sunos* (aka Sun386) host and target.
6509 * config/i386/sun386.mh: Obsolete.
6510 * config/i386/sun386.mt: Obsolete.
6511 * config/i386/xm-sun386.h: Obsolete.
6512 * config/i386/tm-sun386.h: Obsolete.
6513 * config/i386/nm-sun386.h: Obsolete.
6514 * Makefile.in (ALLDEPFILES): Delete sun386-nat.c.
6515 (sun386-nat.o): Target is obsolete.
6516 * sun386-nat.c: Obsolete.
6517 * configure.tgt (i[3456]86-*-sunos*): Obsolete.
6518 * configure.host (i[3456]86-*-sunos*): Obsolete.
6524 * maint.c: Fix typo in comment.
6528 * MAINTAINERS: Swap with Syd Polk as a gdbtk maintainer.
6532 * fork-child.c (fork_inferior, clone_and_follow_inferior):
6533 Document fact that apparent call to vfork() might actually be
6534 a call to fork() instead.
6535 * ser-pipe.c (pipe_open): Likewise.
6539 * printcmd.c (print_frame_args): Use a cleanup to invoke
6540 ui_out_list_end() so that the list count nesting flag will
6541 be decremented properly when an error occurs.
6542 * stack.c (print_frame): Likewise.
6546 * dcache.c (dcache_write_line): Fixed bugs where cache line was
6547 not written to target correctly.
6549 * gdbserver/low-hppabsd.c (read_inferior_memory): Add explicit
6551 * gdbserver/low-nbsd.c: Likewise.
6552 * gdbserver/low-sparc.c: Likewise.
6553 * gdbserver/low-sun3.c: Likewise.
6557 * config/rs6000/nm-rs6000.h (PTRACE_ATTACH): Don't define.
6558 (PTRACE_DETACH): Don't define.
6562 * arch-utils.c (default_prepare_to_proceed)
6563 (generic_prepare_to_proceed): Added new functions.
6564 * arch-utils.h: New function declarations for
6565 default_prepare_to_proceed() and generic_prepare_to_proceed().
6566 * gdbarch.sh: Added PREPARE_TO_PROCEED.
6567 * gdbarch.c: Regenerated.
6568 * gdbarch.h: Regenerated.
6569 * inferior.h: Added get_last_target_status() declaration.
6570 * infrun.c (get_last_target_status): Added new function.
6571 (handle_inferior_event): Saves last pid and waitstatus, which will
6572 get returned by get_last_target_status().
6574 * hppa-tdep.c (prepare_to_proceed): Added comment stating that
6575 prepare_to_proceed() is potentially redundant since
6576 default_prepare_to_proceed() has been added.
6577 * linux-thread.c (prepare_to_proceed): Ditto.
6578 * lin-lwp.c (prepare_to_proceed): Ditto.
6579 * m3-nat.c (prepare_to_proceed): Ditto.
6583 Obsolete powerpcle-*-cygwin* and powerpcle-*-solaris* platforms
6584 and powerpc-*-netware* target.
6585 * configure.host (powerpcle-*-cygwin*, powerpcle-*-solaris*):
6587 * configure.tgt (powerpc-*-netware*, powerpcle-*-cygwin*)
6588 (powerpcle-*-solaris*): Obsolete.
6589 * config/powerpc/tm-cygwin.h: Obsolete.
6590 * config/powerpc/cygwin.mt: Obsolete.
6591 * config/powerpc/xm-cygwin.h: Obsolete.
6592 * config/powerpc/cygwin.mh: Obsolete.
6593 * config/powerpc/nm-solaris.h: Obsolete.
6594 * config/powerpc/xm-solaris.h: Obsolete.
6595 * config/powerpc/tm-solaris.h: Obsolete.
6596 * config/powerpc/solaris.mt: Obsolete.
6597 * config/powerpc/tm-ppc-nw.h: Obsolete.
6598 * config/powerpc/ppc-nw.mt: Obsolete.
6604 * buildsym.c (record_line): Turn off unused addr bits.
6609 * inferior.h: Fix declarations of get_inferior_args and
6610 set_inferior_args, which were missing the trailing 's'.
6614 * monitor.c (monitor_supply_register): Only report an error if we
6615 don't get a valid value.
6619 * README: Don't mention gdba.el.
6624 * top.c (init_main): set prompt if annotation_level>1,
6625 this is necessary when annotation_level is set to 2 via
6626 --annotate=2 command line option.
6630 Obsolete a29k-*-* host and a29k-*-sym1* and a29k-*-kern* targets.
6631 * configure.tgt (a29k-*-sym1*, a29k-*-kern*): Obsolete.
6632 * configure.host (a29k-*-*): Obsolete.
6633 * Makefile.in (ALLDEPFILES): Remove ultra3-nat.c and
6635 (ultra3-nat.o, ultra3-xdep.o): Obsolete.
6636 * config/a29k/tm-ultra3.h: Obsolete.
6637 * config/a29k/ultra3.mt: Obsolete.
6638 * config/a29k/ultra3.mh: Obsolete.
6639 * config/a29k/nm-ultra3.h: Obsolete.
6640 * config/a29k/xm-ultra3.h: Obsolete.
6641 * ultra3-xdep.c: Obsolete.
6642 * ultra3-nat.c: Obsolete.
6643 * config/a29k/a29k-kern.mt: Obsolete.
6649 * main.c: Remove windows.h use.
6650 (gdbtk_test): Use PATH_MAX for home var calculation.
6651 * remote-e7000.c (e7000_parse_device): Accomodate Cygwin as well as
6652 Win32 in colon test.
6653 * ser-tcp.c: Use modern __CYGWIN__ conditional.
6654 * source.c (mod_path): Add __CYGWIN__ conditional to WIN32 test.
6656 * symfile.c (symfile_bfd_open): Ditto.
6660 * main.c (captured_main): For GDBtk, don't use tui_fileopen().
6661 Handle all stream setup in gdbtk_init
6665 * i386-tdep.c (i386_extract_return_value): Don't return the return
6666 value of a void function.
6667 (i386_store_return_value): Likewise.
6671 Obsolete w65-*-* target.
6672 * configure.tgt (w65-*-*): Obsolete.
6673 * config/w65/w65.mt: Obsolete.
6674 * config/w65/tm-w65.h: Obsolete.
6675 * w65-tdep.c: Obsolete.
6676 * NEWS: Update. Fix TiC80 description.
6681 Obsolete tic80-*-* target.
6682 * configure.tgt (tic80-*-*): Obsolete.
6683 * config/tic80/tic80.mt: Obsolete.
6684 * config/tic80/tm-tic80.h: Obsolete.
6685 * tic80-tdep.c: Obsolete.
6691 * remote-mips.c (S_IROTH): Moved definition from here.
6692 * gdb_stat.h (S_IROTH): to here.
6694 * remote.c (remote_protocol_e, remote_protocol_E): Define.
6695 (set_remote_protocol_e_packet_cmd)
6696 (set_remote_protocol_E_packet_cmd)
6697 (show_remote_protocol_e_packet_command)
6698 (show_remote_protocol_E_packet_command): New functions.
6699 (init_all_packet_configs): Initialize remote_protocol_e and
6701 (remote_resume, remote_async_resume): Support e/E command
6703 (show_remote_cmd): Show state of remote_protocol_e and
6705 (_initialize_remote): Add "set remote step-over-range-packet"
6706 and "set remote step-over-range-w-signal-packet" to CLI.
6710 Obsolete ns32k-*-mach3*, ns32k-umax-*, ns32k-utek-sysv* and
6712 * Makefile.in (ALLDEPFILES): Delete umax-xdep.c and ns32km3-nat.c.
6713 (umax-xdep.o, ns32km3-nat.o): Obsolete.
6714 * configure.tgt (ns32k-*-mach3*, ns32k-utek-sysv*, ns32k-utek-*):
6716 * configure.host (ns32k-*-mach3*, ns32k-umax-*, ns32k-utek-sysv*):
6718 * config/ns32k/merlin.mh: Obsolete.
6719 * config/ns32k/merlin.mt: Obsolete.
6720 * config/ns32k/xm-merlin.h: Obsolete.
6721 * config/ns32k/tm-merlin.h: Obsolete.
6722 * config/ns32k/nm-umax.h: Obsolete.
6723 * config/ns32k/umax.mh: Obsolete.
6724 * config/ns32k/umax.mt: Obsolete.
6725 * config/ns32k/xm-umax.h: Obsolete.
6726 * umax-xdep.c: Obsolete.
6727 * config/ns32k/ns32km3.mh: Obsolete.
6728 * config/ns32k/ns32km3.mt: Obsolete.
6729 * config/ns32k/tm-ns32km3.h: Obsolete.
6730 * config/ns32k/xm-ns32km3.h: Obsolete.
6731 * ns32km3-nat.c: Obsolete.
6732 * ns32k-tdep.c (merlin_skip_prologue): Obsolete.
6733 (merlin_frame_num_args): Ditto.
6739 * config/djgpp/fnchange.lst: Tweak due to
6740 expect/example/chesslib.c.
6744 * m88k-tdep.c (examine_prologue): Change type of ``insn'' from
6745 unsigned int to unsigned long. Also, fix format string.
6746 (pop_frame): Fix PC_IN_CALL_DUMMY() call so that it doesn't
6747 use an undeclared variable. Also, delete declaration and
6748 initialization of ``fp'' because it is otherwise unused.
6749 * remote-bug.c (sleep): Delete declaration.
6750 (bug_store_register, bug_write_memory, bug_read_memory)
6751 (bug_insert_breakpoint, bug_remove_breakpoint): Fix sprintf()
6752 format statements and cast certain sprintf() arguments to
6754 (bug_load): Likewise for call to printf_filtered().
6755 * config/m88k/tm-m88k.h (FIX_CALL_DUMMY): Eliminate
6756 assignment to ``pc''. The necessary assignment is done in
6757 hand_function_call() after the invocation of FIX_CALL_DUMMY().
6761 * symtab.c (completion_list_add_name): Remove duplicate string checks,
6762 readline already does this, and it's much faster at it, too.
6766 * go32-nat.c: Minor tweaks, to pacify the ari script.
6770 * i386-tdep.c (i386_extract_struct_value_address): New function.
6771 * config/i386/tm-i386.h (EXTRACT_STRUCT_VALUE_ADDRESS): Redefine
6772 in terms of i386_extract_struct_value_address.
6773 (i386_extract_struct_value_address): New prototype.
6775 * i386-linux-nat.c (i386_linux_dr_get): Change type of return
6776 value to `unsigned long'. Change type of `value' to `unsigned
6778 (i386_linux_dr_set): Change type of second argument to `unsigned
6780 (i386_linux_dr_set_control): Change type of first argument to
6782 (i386_linux_dr_get_status): Change type of return value to
6784 * config/i386/nm-linux.h (i386_linux_dr_set_control,
6785 i386_linux_dr_get_status): Adjust prototypes accordingly.
6789 * ia64-linux-nat.c (ia64_linux_stopped_by_watchpoint): Change
6790 TRAP_HWBKPT constant to match that in the kernel headers for
6795 * i386bsd-nat.c: Include "gdb_assert.h".
6796 [HAVE_PT_GETDBREGS] (DBREG_DRX): Define if not
6798 [HAVE_PT_GETDBREGS] (i386bsd_dr_set, i386bsd_dr_set_control,
6799 i386bsd_dr_set_addr, i386bsd_dr_reset_addr,
6800 i386bsd_dr_get_status): New functions.
6801 * config/i386/nm-fbsd.h [HAVE_PT_GETDBREGS]
6802 (I386_USE_GENERIC_WATCHPOINTS): Define.
6803 Include "i386/nm-i386.h".
6804 (I386_DR_LOW_SET_CONTROL, I386_DR_LOW_SET_ADDR,
6805 I386_DR_LOW_RESET_ADDR, I386_DR_LOW_GET_STATUS): New macros.
6806 (i386bsd_dr_set_control, i386bsd_dr_set_addr,
6807 i386bsd_dr_reset_addr, i386bsd_dr_get_status): New prototypes.
6808 * acconfig.h (HAVE_PT_GETDBREGS): New configure macro.
6809 * configure.in: Cleanup a few comments. Check for PT_GETDBREGS
6811 * config.in, configure: Regenerate.
6813 * i386-nat.c (i386_insert_aligned_watchpoint): Set address
6814 register before enabling it by setting the control register.
6815 (i386_remove_aligned_watchpoint): Reset address register after
6816 disabling it by setting the control register.
6818 * i386-tdep.c (i386_extract_return_value): If the type of the
6819 return value is TYPE_STRUCT and the number of fields is one, call
6820 ourselves with TYPE set tp the type of the first field.
6821 (i386_store_return_value): Likewise.
6822 This fixes a problem with returning structs consisting of a single
6823 `float' or `double' on *BSD.
6827 * lin-lwp.c (lin_lwp_resume): Don't mark LWP as not stopped until
6828 we're absolutely sure we're going to resume it.
6830 * thread-db.c (check_event): Don't report an error if we encounter
6831 a thread creation event for a thread that's already in the thread
6832 list, since that may legitemately happen. Instead only call
6833 attach_thread if it's not already in the thread list.
6837 * config/pa/xm-hppah.h (malloc): Really delete declaration
6838 (MALLOC_INCOMPATIBLE): Really delete macro.
6839 * cli/cli-cmds.c (apropos_command): Use xcalloc.
6843 * configure.in (build_warnings): Add -Wuninitialized.
6844 * configure: Regenerate.
6846 * v850-tdep.c (v850_scan_prologue): Initialize ``insn2''.
6847 * sparc-tdep.c (sparc64_push_arguments): Add default case to
6849 * sh-tdep.c (sh_do_fp_register): Replace ``?:'' printf format
6850 expression with if statement.
6851 * mn10200-tdep.c (mn10200_analyze_prologue): Initialize
6853 * mips-tdep.c (show_mipsfpu_command): Add default case to switch.
6854 (mips_dump_tdep): Fix setting of ef_mips_arch.
6855 * mcore-tdep.c (mcore_analyze_prologue): Initialize ``fp_regnum''.
6856 * dsrec.c (make_srec): Always initialize ``binbuf''.
6857 * monitor.c (monitor_read_memory_single): Do not pass an
6858 uninitialized buffer to monitor_error. Make ``i'' more local.
6862 * MAINTAINERS: Change ns32k target to ,-Werror.
6864 * ns32k-tdep.c: Include "gdbcore.h"
6865 (flip_bytes): Change first argument to void*. Add forward
6867 (sign_extend): Add declaration.
6868 (merlin_frame_num_args): Add final else clause to if-else chain.
6869 (umax_frame_num_args): Ditto.
6870 * config/ns32k/tm-umax.h (ns32k_localcount): Declare.
6871 (flip_bytes): Ditto.
6875 * i386-linux-tdep.c (FRAMELESS_SIGNAL): Moved here from
6876 config/i386/nm-linux.h (including comment).
6877 (i386_linux_frame_chain): New function implementing guts of the
6878 former FRAME_CHAIN macro, but using read_memory_unsigned_integer
6879 instead of read_memory_integer.
6880 (i386_linux_frame_saved_pc): Removed doc pointing to
6881 i386/tm-linux.h for an explanation of FRAMELESS_SIGNAL since that
6882 now lives in this file.
6883 * config/i386/tm-linux.h (FRAMELESS_SIGNAL): Moved to
6884 i386-linux-tdep.c (including comment).
6885 (FRAME_CHAIN): Redefined in terms of i386_linux_frame_chain.
6886 (i386_linux_frame_chain): New prototype.
6888 * gdbserver/low-linux.c [I386_GNULINUX_TARGET]: Cleanup code and
6890 (NUM_FREGS): Redefine to 0.
6891 (NUM_REGS): Redefine as NUM_GREGS.
6892 (i386_register_byte, i386_register_raw_size): Update from
6893 i386-tdep.c. Add comment about their origin.
6894 (regmap, register_u_addr): Take these from i386-linux-nat.c.
6895 (i386_register_u_addr): Removed.
6897 * i386-linux-nat.c (i386_linux_dr_get): Return 0 if ptrace call
6898 fails instead of calling perror_with_name. This should fix
6899 debugging remote i386 targets with a native Linux/x86 GDB. Add
6900 FIXME for this hack.
6904 * arch-utils.c (#include "gdbthread.h"): Removed.
6905 (#include "symfile.h"): Removed.
6906 (XMALLOC): Removed unused macro.
6907 * breakpoint.c (tbreak_command): Removed local declaration.
6908 (awatch_command, do_enable_breakpoint, set_breakpoint_count):
6909 Remove duplicate declarations.
6910 (bpstat_should_step, bpstat_have_active_hw_watchpoints)
6911 (remove_solib_event_breakpoints): Fix indentation botch.
6912 * c-typeprint.c (#include "command.h"): Removed.
6913 (#include "gdbcmd.h"): Removed.
6914 * ch-exp.c (ch_terminal_match_float_literal, parse_expr)
6915 (parse_primval, parse_untyped_expr, parse_opt_untyped_expr):
6916 Removed duplicate declarations.
6917 * ch-typeprint.c (#include "command.h"): Removed.
6918 (#include "gdbcmd.h"): Removed.
6919 * corefile.c (#include "frame.h"): Removed
6920 (#include "symfile.h"): Removed.
6921 (#include "language.h"): Removed.
6922 * dbxread.c (#include "command.h"): Removed.
6923 * environ.c (#include "gdbcore.h"): Removed.
6924 * event-loop.c (#include "top.h"): Removed.
6925 * f-typeprint.c (#include "command.h"): Removed.
6926 (#include "gdbcmd.h"): Removed.
6927 (#include "language.h"): Removed.
6928 (#include "typeprint.h"): Removed.
6929 (#include "frame.h"): Removed.
6930 * gdbtypes.h (print_type_scalar): Removed declaration.
6931 * infcmd.c (#include "completer.h"): Removed.
6932 * language.c (#include "frame.h"): Removed.
6933 * m2-typeprint.c (#include "command.h"): Removed.
6934 (#include "gdbcmd.h"): Removed.
6935 (#include "language.h"): Removed.
6936 * m2-valprint.c (#include "valprint.h"): Removed.
6937 * p-typeprint.c (#include "command.h"): Removed.
6938 (#include "gdbcmd.h"): Removed.
6939 * p-valprint.c (#include "typeprint.h"): Removed.
6940 * parse.c (#include "linespec.h"): Removed.
6941 * regcache.c (#include "frame.h"): Removed.
6942 * remote.c (#include "frame.h"): Removed.
6943 (getpkt_sane): Make static.
6944 * source.c (#include "completer.h"): Removed.
6945 * stack.c (#include "symfile.h"): Removed.
6946 (#include "objfiles.h"): Removed.
6947 * symfile.c (#include "completer.h"): Removed.
6948 * tracepoint.c (#include "completer.h"): Removed.
6949 * values.c (#include "frame.h"): Removed.
6950 * varobj.c (#include "valprint.h"): Removed.
6951 * wrapper.c (#include "frame.h"): Removed.
6953 * memattr.c (create_mem_region): Removed unused variable.
6954 * remote-nrom.c: Removed spurious semicolon after init_nrom_ops.
6958 * remote-rdp.c (rdp_set_command_line): Add missing double quote.
6962 * solib-aix5.c (build_so_lib_from_mapfile): Use xfree() instead
6967 * TODO (Cleanups): Remove the item about converting docs to GFDL.
6971 * ia64-tdep.c (slotN_contents, replace_slotN_contents): Change
6972 type of ``bundle'' from unsigned char * to char *.
6973 (ia64_get_saved_register): Use alloca() to allocate register
6976 * solib-aix5.c (build_so_lib_from_mapfile): Fix xasprintf() usage.
6980 * proc-utils.h (procfs_ctl_t): New typedef.
6981 * proc-api.c (write_with_trace): Change type of ``opcode'' from
6982 long to procfs_ctl_t. Don't assume that the target has defined
6983 BREAKPOINT. Handle case in which PCRESET is the same as PCUNSET.
6984 * proc-events.c (sys/syscall.h, sys/fault.h): Include conditionally.
6985 * procfs.c (sys/fault.h, sys/syscall.h): Include conditionally.
6986 (gdb_sigset_t, gdb_sigaction_t, gdb_siginfo_t, gdb_premptysysset)
6987 (gdb_praddsysset, gdb_prdelsysset, gdb_pr_issyssetmember):
6988 Conditionally define as appropriate for AIX/non-AIX systems. Use
6989 these defines/typedefs as appropriate elsewhere in file.
6990 (struct procinfo): Change type of saved_sigset and saved_sighold
6991 from sigset_t to gdb_sigset_t. Make saved_exitset and
6992 saved_entryset pointer variables. Add two new fields, num_syscalls
6994 (DYNAMIC_SYSCALLS): Define when HAVE_PRSYSENT_T is defined.
6995 (sysset_t_size, sysset_t_alloc): New functions.
6996 (load_syscalls, free_syscalls, find_syscall): New functions for
6997 platforms which define DYNAMIC_SYSCALLS.
6998 (create_procinfo): Call load_syscalls.
6999 (destroy_one_procinfo): Call free_syscalls.
7000 (GDBRESET): Don't define twice.
7001 (proc_modify_flag): Change type of operation code array `arg'
7002 from long to procfs_ctl_t.
7003 (proc_stop_process, proc_wait_for_stop, proc_run_process)
7004 (proc_set_traced_signals, proc_set_traced_faults)
7005 (proc_set_traced_sysentry, proc_set_traced_sysexit)
7006 (proc_set_held_signals, proc_clear_current_fault)
7007 (proc_set_current_signal, proc_clear_current_signal, proc_set_gregs)
7008 (proc_set_fpregs, proc_kill, proc_set_watchpoint): Likewise for `cmd'.
7009 (proc_set_traced_sysentry): Dynamically allocate variable sized
7010 struct gdb_proc_ctl_pcsentry. Also, free it at function exit.
7011 (proc_set_traced_sysexit): Dynamically allocate variable
7012 sized struct gdb_proc_ctl_pcsexit. Also, free it at
7014 (proc_get_traced_sysentry, proc_get_traced_sysexit): Add new code
7015 for reading the sysset_t struct on AIX5.
7016 (procfs_debug_inferior): Don't assume that SYS_exit will be
7017 defined. Add new code for finding certain syscalls on AIX5.
7018 (syscall_is_lwp_exit, syscall_is_exit, syscall_is_exec)
7019 (syscall_is_lwp_create): New functions.
7020 (procfs_wait): Restructured code which checks for certain
7021 system calls to use the new syscall_is_... functions.
7022 (procfs_notice_signals): Account for the fact that saved_entryset
7023 and saved_exitset in struct procinfo are now pointers.
7027 * symtab.c (find_pc_sect_line): Revise method used for finding
7032 * i386-linux-tdep.c (i386_linux_sigtramp_saved_pc,
7033 i386_linux_sigtramp_saved_sp): Make static.
7034 (i386_linux_frame_saved_pc): New function based on the old
7035 FRAME_SAVED_PC macro, but use read_memory_unsigned_integer instead
7036 of read_memory_integer.
7037 * config/i386/tm-linux.h (sigtramp_saved_pc): Remove definition.
7038 (i386_linux_sigtramp_saved_pc): Remove prototype.
7039 (FRAME_SAVED_PC): Redefine in terms of i386_linux_frame_saved_pc.
7040 (i386_linux_frame_saved_pc): New prototype.
7044 * MAINTAINERS: Document m88k as a ``Known problem in 5.1''.
7045 * TODO (GDB 5.1 - Cleanups): Update.
7049 * fork-child.c (clone_and_follow_inferior): Delete #ifdef
7054 * config/i386/tm-symmetry.h (PUSH_ARGUMENTS): #undef.
7056 * i386-tdep.c (i386_push_arguments, i386_store_struct_return): New
7058 * config/i386/tm-i386.h (PUSH_ARGUMENTS): New macro.
7059 (STORE_STRUCT_RETURN): Redefine in terms of
7060 i386_store_struct_return.
7061 (i386_push_arguments, i386_store_struct_return): New prototypes.
7062 * config/i386/tm-i386v.h (STORE_STRUCT_RETURN): Remove. It's
7063 definition was identical to the definition in "i386/tm-i386.h" so
7064 the new definition should suffice too.
7068 * event-loop.c (toplevel) [!HAVE_POLL] [NO_FD_SET]: Remove unused
7069 definitions for SELECT, NBBY, FD_SETSIZE, NFDBITS, and MASK_SIZE.
7071 * config/djgpp/djconfig.sh: Add copyright notice.
7073 * ser-go32.c (rawclock): Remove prototype; include time.h instead.
7074 (ISR, dos_hookirq, isr_t): Convert K&R definition to ANSI C.
7075 (top level) <string.h>: Include gdb_string.h instead.
7076 (dos_noop, dos_raw, dos_noflush_set_tty_state)
7077 (dos_print_tty_state, dos_info): Remove ATTRIBUTE_UNUSED.
7079 * go32-nat.c (go32_create_inferior): Move the declaration of
7080 `environ' to here from the top level.
7081 (top level) <_initialize_go32_nat>: Remove redundant prototype.
7082 <gdb_string.h>: Include it instead of string.h.
7083 (store_register): Call register_buffer instead of accessing
7084 registers[] directly.
7085 (redir_cmdline_delete, redir_cmdline_parse, redir_to_debugger)
7086 (redir_to_debugger, redir_debug_init) [__DJGPP_MINOR__ < 3]: Put
7087 the function names at the start of the line.
7088 (go32_set_dr): Throw internal_error if the argument is not a valid
7089 debug register number.
7090 (go32_open, go32_close, go32_attach, go32_detach, go32_resume)
7091 (go32_wait, go32_xfer_memory, go32_files_info)
7092 (go32_terminal_info): Remove ATTRIBUTE_UNUSED.
7096 * mips-tdep.c (mips_gdbarch_init): Tweak indentation.
7102 * coffread.c: Include "gdb_assert.h".
7103 (coff_symtab_read): Cast the integer s_sclass to a long before
7104 casting it to a pointer.
7110 * coffread.c (coff_symtab_read): Initialize
7111 ``fcn_first_line_addr''. Check that the ``.bf'' always preceeds
7113 * dbxread.c (find_text_range): Initialize ``start'' and ``end''.
7117 * config/sparc/tm-sp64.h (GDB_MULTI_ARCH): Down grade to
7118 GDB_MULTI_ARCH_PARTIAL from two. SOFTWARE_SINGLE_STEP is not
7121 * gdbarch.sh (SOFTWARE_SINGLE_STEP): Add.
7122 * gdbarch.h, gdbarch.c: Re-generate.
7124 * target.h (SOFTWARE_SINGLE_STEP_P)
7125 (SOFTWARE_SINGLE_STEP): Delete macro definitions.
7129 * gdbarch.sh (gdbarch_register_read, gdbarch_register_write): Add.
7130 * gdbarch.h, gdbarch.c: Regenerate.
7132 * regcache.h (regcache_read, regcache_write): Declare.
7133 (registers, register_valid, register_buffer): Add note that these
7134 interfaces are deprecated.
7136 * regcache.c: Include "gdb_assert.h".
7137 (legacy_write_register_gen): Rename write_register_gen.
7138 (legacy_read_register_gen): Rename read_register_gen.
7139 (regcache_read, regcache_write): New function.
7140 (read_register_gen, write_register_gen): New function.
7141 (write_register): Simplify. Use write_register_gen.
7142 (read_register): Ditto using read_register_gen.
7143 (read_signed_register): Ditto.
7144 (read_register_bytes): Ditto!!!!
7145 (supply_register): Add note that CLEANUP_REGISTER_VALUE is being
7146 replaced by gdbarch_register_read.
7148 * TODO (GDB 5.2 - Cleanups): Add list of gdbarch methods to
7153 Fix from Dan Berlin:
7155 * stabsread.c (read_cpp_abbrev): Properly construct the names of
7156 virtual function table pointer fields.
7160 * defs.h (xfree, mcalloc, mmalloc, mrealloc, mfree, xmmalloc,
7161 xmrealloc): Move existing declarations to the one place and
7162 re-order to be consistent.
7163 (xmcalloc, xmfree): Declare.
7164 (xmmalloc, xmrealoc): Assume ISO-C - use size_t and void* in
7167 * utils.c (size_t): Delete #ifdef defining size_t.
7168 (mmalloc, mrealloc, mcalloc, mfree): Re-order.
7169 (mmalloc, mrealloc, mcalloc): Document as only calls in GDB
7170 corresponding malloc, realloc, calloc.
7171 (mfree): Call free directly.
7172 (xmmalloc, xmrealloc): Clean up. Assume ISO-C.
7173 (xmcalloc, xmfree): New functions. Copy old xcalloc and xfree
7174 function bodies to here.
7175 (xcalloc, xfree): Call xmcalloc and xmfree respectfully.
7179 * fork-child.c (fork_inferior): Make ``argv'', ``exec_file'' and
7180 ``shell_file'' static locals.
7182 * jv-lang.c (java_link_class_type): Initialize ``field'' and
7185 * jv-valprint.c (java_value_print): Initialize ``next_element''.
7189 * config/i386/nm-i386.h: Fix formatting and change reference to
7190 i386-tdep.c to i386-nat.c.
7194 * configure.in: Corrected spelling errors.
7195 * configure: Regenerated.
7199 * TODO (GDB 5.1 - Cleanups): Add more targets to obsolete.
7203 * Makefile.in (NTSSTART): Delete.
7205 (kdb): Delete target.
7206 * kdb-start.c, stuff.c: Mark as obsolete.
7211 * config/pa/xm-hppah.h (HPPA_COMPILER_BUG): Delete. GDB only
7212 compiles using an ISO-C compiler.
7213 (MALLOC_INCOMPATIBLE): Ditto.
7214 * linespec.c (decode_line_1): Delete hack to work around
7219 * exec.c (xfer_memory): Always initialize section.
7220 * infrun.c (normal_stop): Always initialize source_flag.
7224 * TODO (Remote Protocol Support): Review. Add notes about ``!'',
7225 non-use of a continue address and typical use of ``q'' packet.
7229 Make DJGPP use the new unified support for hardware
7230 breakpoints and watchpoints on x86 targets:
7232 * config/i386/nm-go32.h <top level>: Don't include nm-i386v.h,
7233 include nm-i386.h instead.
7234 (TARGET_HAS_HARDWARE_WATCHPOINTS, HAVE_CONTINUABLE_WATCHPOINT)
7235 (TARGET_CAN_USE_HARDWARE_WATCHPOINT, STOPPED_BY_WATCHPOINT)
7236 (TARGET_REGION_OK_FOR_HW_WATCHPOINT, DECR_PC_AFTER_HW_BREAK)
7237 (target_stopped_data_address, target_insert_watchpoint)
7238 (target_remove_watchpoint, target_insert_hw_breakpoint)
7239 (target_remove_hw_breakpoint): Don't define.
7240 (I386_USE_GENERIC_WATCHPOINTS, I386_DR_LOW_SET_CONTROL)
7241 (I386_DR_LOW_SET_ADDR, I386_DR_LOW_RESET_ADDR)
7242 (I386_DR_LOW_GET_STATUS): Define to call appropriate go32_*
7243 functions from go32-nat.c.
7245 * config/i386/go32.mh (NATDEPFILES): Add i386-nat.o.
7247 * go32-nat.c <top level>: Remove prototypes for watchpoint-
7248 related functions. Remove definitions of watchpoint-related
7250 (go32_mourn_inferior): Call i386_cleanup_dregs instead of the
7251 private cleanup_dregs function.
7252 (cleanup_dregs, go32_insert_watchpoint)
7253 (go32_insert_aligned_watchpoint, go32_handle_nonaligned_watchpoint)
7254 (go32_remove_watchpoint, go32_remove_aligned_watchpoint)
7255 (go32_region_ok_for_watchpoint, go32_stopped_by_watchpoint)
7256 (go32_remove_hw_breakpoint, go32_insert_hw_breakpoint): Remove.
7257 (go32_set_dr, go32_set_dr7, go32_get_dr6): New functions.
7261 * ia64-tdep.c (fetch_instruction): Warn about slot numbers greater
7262 than two instead of generating an error.
7266 * cp-valprint.c: Reformat to bring into line with GNU coding
7271 Make Linux use the new unified support for hardware breakpoints
7272 and watchpoints on x86 targets.
7273 * i386-linux-nat.c: Doc fixes. Include "gdb_assert.h".
7274 [HAVE_SYS_DEBUGREG_H]: Include <sys/debugreg.h>.
7275 (DR_FIRSTADDR, DR_LASTADDR, DR_STATUS, DR_CONTROL): Define to
7276 appropriate value if not already defined.
7277 (register_u_addr): New function.
7278 (kernel_u_size): New function.
7279 (i386_linux_dr_get, i386_linux_dr_set): New functions.
7280 (i386_linux_dr_set_control, i386_linux_dr_set_addr,
7281 i386_linux_reset_addr, i386_linux_dr_get_status): New functions.
7282 * config/i386/nm-linux.h: Don't include "nm-i386v.h".
7283 (I386_USE_GENERIC_WATCHPOINTS): Define and include "nm-i386.h".
7284 (TARGET_HAS_HARDWARE_WATCHPOINTS,
7285 TARGET_CAN_USE_HARDWARE_WATCHPOINTS, HAVE_CONTINUABLE_WATCHPOINT,
7286 STOPPED_BY_WATCHPOINT, target_insert_watchpoint,
7287 target_remove_watchpoint): Remove macros.
7288 (i386_stopped_by_watchpoint, i386_insert_watchpoint,
7289 i386_remove_watchpoint): Remove prototypes.
7290 (register_u_addr): New prototype.
7291 (REGISTER_U_ADDR): Define in terms of register_u_addr.
7292 (i386_linux_dr_set_control, i386_linux_dr_set_addr,
7293 i386_linux_reset_addr, i386_linux_dr_get_status): New prototypes.
7294 (I386_DR_LOW_SET_CONTROL, I386_DR_LOW_SET_ADDR,
7295 I386_DR_LOW_RESET_ADDR, I386_DR_LOW_GET_STATUS): New macros.
7296 * config/i386/linux.mh (NATDEPFILES): Replace i386v-nat.o with
7301 Fix from Dan Berlin:
7303 * linespec.c (find_methods): Whitespace differences aren't
7304 significant in *un*mangled method names. Use strcmp_iw to compare
7309 * gdbarch.sh: Allow a non- multi-arch target to override a
7311 * gdbarch.h: Regenerate.
7315 * gdbarch.sh: Avoid use of ``!''.
7319 * target.h (enum target_signal): Move definition from here.
7320 * defs.h (enum target_signal): To here.
7322 * config/arc/tm-arc.h (arc_software_single_step): Change type of
7323 first parameter to enum target_signal.
7324 * config/rs6000/tm-rs6000.h (rs6000_software_single_step): Ditto.
7325 * config/sparc/tm-sparc.h (sparc_software_single_step): Ditto.
7326 * rs6000-tdep.c (rs6000_software_single_step): Update.
7330 * frame.h (SIZEOF_FRAME_SAVED_REGS): Report an error if macro
7334 * stabsread.c (define_symbol): A parameter ('R'), a local ('r'),
7335 or a reference ('a') can be in a pseudo register.
7336 * infcmd.c (do_registers_info): Must take into account the pseudo
7337 registers to print their value.
7338 (registers_info): Likewise.
7339 * stack.c (frame_info): Likewise.
7340 * frame.h (SIZEOF_FRAME_SAVED_REGS): Save the pseudo registers.
7344 Unified support for hardware breakpoints and watchpoints on
7347 * config/i386/nm-i386.h: New file.
7349 * config/i386/nm-i386.h: (i386_cleanup_dregs)
7350 (i386_insert_watchpoint, i386_remove_watchpoint)
7351 (i386_region_ok_for_watchpoint, i386_stopped_by_hwbp)
7352 (i386_stopped_data_address, i386_insert_hw_breakpoint)
7353 (i386_remove_hw_breakpoint): Declare prototypes.
7354 [I386_USE_GENERIC_WATCHPOINTS] (TARGET_CAN_USE_HARDWARE_WATCHPOINT):
7355 Define if not already defined.
7356 (TARGET_REGION_OK_FOR_HW_WATCHPOINT, HAVE_CONTINUABLE_WATCHPOINT)
7357 (STOPPED_BY_WATCHPOINT, target_stopped_data_address)
7358 (target_insert_watchpoint, target_remove_watchpoint)
7359 (target_insert_hw_breakpoint, target_remove_hw_breakpoint): Define
7360 to call the appropriate i386_* functions.
7362 * i386-nat.c: New file.
7364 * i386-nat.c (I386_DR_CONTROL_MASK, I386_DR_LOCAL_ENABLE)
7365 (I386_DR_GLOBAL_ENABLE, I386_DR_DISABLE, I386_DR_SET_RW_LEN)
7366 (I386_DR_GET_RW_LEN, I386_DR_WATCH_HIT): New macros.
7367 (dr_mirror, dr_status_mirror, dr_control_mirror, dr_ref_count)
7368 (maint_show_dr): New variables.
7369 (i386_cleanup_dregs, i386_show_dr, i386_length_and_rw_bits)
7370 (i386_insert_aligned_watchpoint, i386_remove_aligned_watchpoint)
7371 (i386_handle_nonaligned_watchpoint, i386_insert_watchpoint)
7372 (i386_remove_watchpoint, i386_region_ok_for_watchpoint)
7373 (i386_stopped_data_address, i386_stopped_by_hwbp)
7374 (i386_insert_hw_breakpoint, i386_remove_hw_breakpoint): New
7376 (_initialize_i386_nat): New function.
7377 [I386_USE_GENERIC_WATCHPOINTS]: Add new maint command
7378 `show-debug-regs', sets maint_show_dr to non-zero value and
7379 activates debugging print-outs in functions which insert, remove,
7380 and test watchpoints and hardware breakpoints.
7382 * Makefile.in (i386-nat.o): New target.
7383 (ALLDEPFILES): Add i386-nat.o.
7387 * i386-tdep.c: Add back _initialize_i386_tdep prototype with
7388 appropriate comment.
7392 * config/alpha/alpha-linux.mh (NATDEPFILES): Use proc-service.o,
7393 thread-db.o, and lin-lwp.o for thread support instead of
7394 linux-thread.o and lin-thread.o.
7395 * config/alpha/nm-linux.h (PREPARE_TO_PROCEED, GET_THREAD_SIGNALS)
7396 (ATTACH_LWP): Define to use the following lin-lwp.c functions...
7397 (lin_lwp_prepare_to_proceed, lin_thread_get_thread_signals)
7398 (lin_lwp_attach_lwp): Declare.
7402 Fix from Dan Berlin:
7404 * Makefile.in: Clean up dependencies on ../include/demangle.h.
7405 (demangle_h): New variable.
7406 (jv-typeprint.o, jv-valprint.o, linespec.o): Use it.
7410 * target.h (SOFTWARE_SINGLE_STEP_P): Add empty parameter list.
7411 * breakpoint.c (bpstat_stop_status): Update.
7412 * infrun.c (handle_inferior_event): Ditto.
7413 * mips-tdep.c (mips_dump_tdep): Ditto.
7414 * infrun.c (resume): Ditto.
7415 * infptrace.c (child_resume): Ditto.
7416 * config/mips/tm-wince.h (SOFTWARE_SINGLE_STEP_P): Ditto.
7417 * config/sh/tm-wince.h (SOFTWARE_SINGLE_STEP_P): Ditto.
7418 * config/sparc/tm-sparc.h (SOFTWARE_SINGLE_STEP_P): Ditto.
7419 * config/powerpc/tm-linux.h (SOFTWARE_SINGLE_STEP_P): Ditto.
7420 * config/arm/tm-wince.h (SOFTWARE_SINGLE_STEP_P): Ditto.
7421 * config/arc/tm-arc.h (SOFTWARE_SINGLE_STEP_P): Ditto.
7422 * config/powerpc/tm-ppc-eabi.h (SOFTWARE_SINGLE_STEP_P): Ditto.
7426 * config/powerpc/tm-linux.h (SOFTWARE_SINGLE_STEP): Replace abort
7427 with internal_error.
7431 Fix from Dan Berlin:
7433 * linespec.c (find_methods): Just call CHECK_TYPEDEF on t, rather
7434 than asking for sym_class's type; that's circuitous. Remove
7435 sym_class, since the last use of it is gone.
7439 * breakpoint.c (print_it_typical) <bp_access_watchpoint> [UI_OUT]:
7440 Correct the order of calls to ui_out_field_string and
7441 ui_out_list_begin when bs->old_val is NULL.
7445 * configure.in (AC_CHECK_HEADERS): Check for existence of nlist.h.
7446 * configure: Regenerate.
7447 * config.in: Regenerate.
7448 * solib-legacy.c (nlist.h): Include if HAVE_NLIST_H is defined.
7452 * config/i386/i386v42mp.mh (NATDEPFILES): List all files on
7453 same line to avoid problems with Unixware 7's make when building
7458 * defs.h (malloc): Move declaration from here.
7459 * utils.c (malloc): To here.
7460 * config/pa/xm-hppah.h (malloc): Delete declaration.
7462 * gnu-nat.c (make_proc): Use xmalloc instead of malloc.
7463 * hp-psymtab-read.c (hpread_call_pxdb): Ditto.
7464 (hpread_quick_traverse): Ditto.
7465 * infttrace.c (create_thread_info): Ditto.
7466 (kill_inferior): Ditto.
7467 * gnu-nat.c (make_inf): Ditto, and don't check return value.
7468 * procfs.c (proc_update_threads): Ditto.
7469 * valprint.c (print_decimal_chars): Ditto.
7470 * gdbtypes.c (cfront_mangle_name): Use xasprintf instead of
7472 * remote-rdp.c (rdp_set_command_line): Ditto.
7476 * defs.h (realloc): Move declaration from here.
7477 * utils.c (realloc): To here.
7478 * config/pa/xm-hppah.h (realloc): Delete declaration.
7479 * lin-thread.c (insert_thread): Use xrealloc instead of realloc.
7480 * symfile.c (add_filename_language): Ditto.
7481 * event-loop.c (create_file_handler): Ditto.
7485 * defs.h (free): Move declaration from here.
7486 * utils.c (free): To here.
7487 (xfree): Document as the only call to free().
7488 * config/pa/xm-hppah.h (free): Delete declaration.
7492 * config/ia64/linux.mh (NATDEPFILES): Add proc-service.o to
7497 * eval.c (evaluate_subexp): Remove #ifdef __STDC__ and ``inline''.
7498 * config/mips/xm-mips.h (offsetof): Define when !GNUC not !STDC.
7499 * cli/cli-cmds.c (init_cli_cmds): Remove #ifdef __STDC__
7503 * TODO: List known problems with TUI.
7507 * MAINTAINERS: Jimmy Guo stepped down as a maintiner (TUI,
7512 * remote.c (remote_cisco_section_offsets): Do not cast result from
7513 bfd_get_section_name.
7514 (compare_sections_command): Ditto.
7515 (remote_cisco_section_offsets): Make ``p'' a const pointer.
7516 (compare_sections_command): Ditto for ``sectname''.
7521 * valops.c (hand_function_call): Simplify computation of the
7522 address of the pushed argument.
7526 * p-exp.y (parse_number): Avoid shift overflow when ``long''.
7527 Code copied from c-exp.y.
7531 * acconfig.h (HAVE_STRUCT_LINK_MAP_WITH_L_MEMBERS)
7532 (HAVE_STRUCT_LINK_MAP_WITH_LM_MEMBERS)
7533 (HAVE_STRUCT_SO_MAP_WITH_SOM_MEMBERS): New configure macros.
7534 * configure.in (HAVE_STRUCT_LINK_MAP32): Move this test out
7535 of the Solaris procfs testing section. Instead, group with...
7536 (HAVE_STRUCT_LINK_MAP_WITH_L_MEMBERS)
7537 (HAVE_STRUCT_LINK_MAP_WITH_LM_MEMBERS)
7538 (HAVE_STRUCT_SO_MAP_WITH_SOM_MEMBERS): New <link.h> tests.
7539 * configure: Regenerate.
7540 * config.in: Regenerate.
7542 * solib-legacy.c (legacy_svr4_fetch_link_map_offsets): Use
7543 new configure macros to choose which (if any) code to
7544 compile in. Added code to explicitly handle *BSD systems;
7545 these systems were previously handled only through macro
7546 redefinition. Also, due to the way the autoconf tests are set
7547 up, this function will no longer return a non-zero value when
7548 GDB is configured as a cross debugger. I.e, cross debuggers
7549 will no longer be able to "accidentally" get the host system's
7554 * config/i386/nbsd.mh (NATDEPFILES): List all files on the same
7555 line to avoid build problem on NetBSD 1.4.
7559 * win32-nat.c (child_attach): check args for NULL before passing
7560 to strtoul. This fixes PR gdb/43.
7564 * i387-nat.h: Doc Fix.
7566 * i386-tdep.c: Fix formatting.
7567 (i386_get_frame_setup, i386_follow_jump, codestream_read,
7568 codestream_seek, codestream_fill, skip_trampoline_code,
7569 gdb_print_insn_i386, _initialize_i386_tdep): Remove redundant
7574 * config/i386/tm-linux.h (TARGET_ANALYZE_FLOATING): Remove. It's
7575 no longer used. Also remove associated FIXME.
7579 * gdbarch.sh: Add classes ``m'' and ``M'' for pure multi-arch. Do
7580 not generate macro wrappers for multi-arch functions or
7582 (class_is_info_p, class_is_predicate_p): Update.
7583 (class_is_function_p, class_is_variable_p): Ditto.
7584 (class_is_multiarch_p): New class function.
7588 * config/h8300/tm-h8300.h (FRAME_ARGS_ADDRESS): Changed to use
7589 h8300_frame_args_address from frame_args_address.
7590 (FRAME_LOCALS_ADDRESS): Changed to use h8300_frame_locals_address
7591 from frame_locals_address.
7592 (PRINT_REGISTER_HOOK): Changed to use h8300_print_register_hook
7593 from print_register_hook.
7594 (h8300_frame_args_address): Declare.
7595 (h8300_frame_find_saved_regs): Declare.
7596 (h8300_frame_locals_address): Declare.
7597 (h8300_frame_saved_pc): Declare.
7598 (h8300_pop_frame): Declare.
7599 (h8300_print_register_hook): Declare.
7600 * h8300-tdep.c (h8300_frame_find_saved_regs): Removed declaration.
7601 (h8300_frame_args_address): Renamed from frame_args_address.
7602 (h8300_frame_locals_address): Renamed from frame_locals_address.
7603 (h8300_pop_frame): Renamed from pop_frame.
7604 (h8300_print_register_hook): Renamed from print_register_hook.
7608 * solib-svr4.c (bfd_lookup_symbol): Change type of
7609 ``storage_needed'' from unsigned int to long in order to
7610 match return type of bfd_get_symtab_upper_bound() and
7611 bfd_get_dynamic_symtab_upper_bound().
7612 * solib-aix5.c (bfd_lookup_symbol): Likewise. Also, eliminate
7613 REASONABLE_LIMIT hack which had been added to work around this
7618 * solib-aix5.c (bfd_lookup_symbol, build_so_list_from_mapfile)
7619 (aix5_relocate_main_executable, aix5_clear_solib): Replace calls
7620 to free() with calls to xfree().
7621 (bfd_lookup_symbol): Eliminate use of PTR.
7622 (build_so_list_from_mapfile): Use xasprintf() instead of sprintf().
7626 * linespec.c (decode_line_1): Remove trailing quote
7627 when parsing double quotes.
7631 * uw-thread.c (read_thr_debug, read_map, read_lwp, thread_iter)
7632 (libthread_stub, libthread_init): Pass NULL for the mem_attrib
7633 argument in the to_xfer_memory calls.
7637 * MAINTAINERS: Fix typo - w65 not w64. Still doesn't build.
7638 * TODO (GDB 5.1 - Cleanups): Add status of targets being obsoleted.
7642 * wince.c (child_xfer_memory): Add attrib parameter.
7643 * symm-nat.c (child_xfer_memory): Ditto.
7644 * mac-nat.c (child_xfer_memory): Ditto.
7645 * infttrace.c (child_xfer_memory): Ditto.
7646 * procfs.c (procfs_xfer_memory): Ditto.
7647 * lin-thread.c (thread_db_xfer_memory): Ditto.
7648 * gnu-nat.c (gnu_xfer_memory): Ditto.
7652 * NEWS: Mention that Harris/CXUX m88k is obsolete.
7656 * config/mips/tm-mips.h: Include "regcache.h" for macros refering
7657 to regcache functions.
7658 * config/m68k/tm-m68k.h: Ditto.
7659 * config/i386/tm-i386v.h: Ditto.
7660 * config/mcore/tm-mcore.h: Ditto.
7661 * config/m88k/tm-m88k.h: Ditto.
7662 * config/m68k/tm-news.h: Ditto.
7663 * config/m68k/tm-linux.h: Ditto.
7664 * config/m68k/tm-delta68.h: Ditto.
7665 * config/m68k/nm-sun3.h: Ditto.
7666 * config/m32r/tm-m32r.h: Ditto.
7667 * config/i386/tm-symmetry.h: Ditto.
7668 * config/i386/tm-sun386.h: Ditto.
7669 * config/i386/tm-i386.h: Ditto.
7670 * config/i386/nm-symmetry.h: Ditto.
7671 * config/i386/nm-sun386.h: Ditto.
7672 * config/i386/nm-ptx4.h: Ditto.
7673 * config/i386/nm-i386mach.h: Ditto.
7674 * config/h8500/tm-h8500.h: Ditto.
7675 * config/h8300/tm-h8300.h: Ditto.
7676 * config/fr30/tm-fr30.h: Ditto.
7677 * config/d30v/tm-d30v.h: Ditto.
7678 * config/arm/tm-arm.h: Ditto.
7679 * config/arc/tm-arc.h: Ditto.
7680 * config/alpha/tm-alpha.h: Ditto.
7681 * config/a29k/tm-vx29k.h: Ditto.
7682 * config/a29k/tm-a29k.h: Ditto.
7683 * config/w65/tm-w65.h: Ditto.
7684 * config/vax/tm-vax.h: Ditto.
7685 * config/v850/tm-v850.h: Ditto.
7686 * config/tic80/tm-tic80.h: Ditto.
7687 * config/sparc/tm-sparclite.h: Ditto.
7688 * config/sparc/tm-sparclet.h: Ditto.
7689 * config/sparc/tm-sparc.h: Ditto.
7690 * config/sparc/nm-sun4sol2.h: Ditto.
7691 * config/sparc/nm-sun4os4.h: Ditto.
7692 * config/sparc/nm-nbsd.h: Ditto.
7693 * config/powerpc/nm-solaris.h: Ditto.
7694 * config/pa/tm-hppao.h: Ditto.
7695 * config/pa/tm-hppa.h: Ditto.
7696 * config/pa/nm-hppab.h: Ditto.
7697 * config/ns32k/tm-umax.h: Ditto.
7698 * config/ns32k/tm-merlin.h: Ditto.
7699 * config/nm-m3.h: Ditto.
7700 * config/nm-gnu.h: Ditto.
7704 * MAINTAINERS: Update list of targets. Mark arm-* and v850-elf as
7705 broken. Mark sh-*, ia64-linux and ns32k-netbsd as buildable.
7706 Specify an m88k target. Include sample GAWK script to generate
7707 target list. Delete non-existant romp target.
7708 * TODO (GDB 5.1 - Cleanups): Update.
7712 * linespec.c (decode_line_1): Skip argptr over a leading
7713 double quote. Prevents alloc of 0 bytes and memcpy of -1 bytes.
7717 * config/djgpp/fnchange.lst (ia64-aix-nat.c): Add entry.
7721 * ui-out.h: Remove #if __STDC__, assume an ISO-C compiler.
7724 * printcmd.c (printf_command): Ditto.
7725 * ch-exp.c (match_integer_literal): Ditto.
7726 * scm-tags.h: Ditto.
7727 * ser-go32.c: Ditto.
7728 * hppa-tdep.c (unwind_command): Ditto.
7729 * defs.h (volatile): Delete macro definition. Assume __STDC__.
7730 * remote-adapt.c (volatile): Ditto.
7731 * remote-eb.c (volatile): Ditto.
7732 * remote-mm.c (volatile): Ditto.
7733 * defs.h (alloca): Assume __STDC__, declare returning void *.
7737 * inferior.h (ARCH_NUM_REGS): Delete definition.
7738 * stack.c (frame_info): Use NUM_REGS, not ARCH_NUM_REGS.
7739 * regcache.c (registers_changed): Ditto.
7740 (registers_fetched): Ditto.
7741 * infptrace.c (fetch_inferior_registers): Ditto.
7742 (store_inferior_registers): Ditto.
7743 * infcmd.c (do_registers_info): Ditto.
7744 (registers_info): Ditto.
7745 * i386-linux-nat.c (old_fetch_inferior_registers): Ditto.
7746 (old_store_inferior_registers): Ditto.
7747 * gdbserver/low-linux.c (register_addr): Ditto.
7748 * gdbserver/low-hppabsd.c (register_addr): Ditto.
7749 * core-aout.c: Don't include "inferior.h".
7750 (fetch_core_registers): Use NUM_REGS not ARCH_NUM_REGS.
7751 (register_addr): Ditto.
7756 * cli/cli-script.c (define_command): Fix setting of post hooks.
7760 * i386-linux-tdep.c: Fix formatting and clarify comments.
7761 (i386_linux_svr4_fetch_link_map_offsets): Use NULL instead of 0
7766 * gnu-nat.c: Include "gdb_assert.h" instead of <assert.h>.
7767 (proc_update_sc): Use gdb_assert instead of assert.
7768 (proc_abort): Ditto.
7769 (inf_set_step_thread): Ditto.
7771 (S_exception_raise_request): Ditto.
7772 (gnu_terminal_init_inferior): Ditto.
7776 * Makefile.in (solib-svr4.o): Depend on solib-svr4.c, not solib.c.
7777 (solib-legacy.o): New makefile target.
7778 * solib-legacy.c: New file.
7779 * solib-svr4.h (SVR4_FETCH_LINK_MAP_OFFSETS): Delete.
7780 (default_svr4_fetch_link_map_offsets): Delete.
7781 (set_solib_svr4_fetch_link_map_offsets): Declare.
7782 (legacy_svr4_fetch_link_map_offsets_hook): Declare.
7783 * solib-svr4.c (elf/common.h): Include.
7784 (link.h): Only include for SunOS shared library support.
7785 (_SYSCALL32): Don't define.
7786 (SVR4_FETCH_LINK_MAP_OFFSETS): Define.
7787 (default_svr4_fetch_link_map_offsets): Made static; added forward
7789 (fetch_link_map_offsets): New static global.
7790 (legacy_svr4_fetch_link_map_offsets_hook): New global variable.
7791 (default_svr4_fetch_link_map_offsets): Rewritten. The guts
7792 of what used to be in this function now reside in
7793 legacy_svr4_fetch_link_map_offsets() in solib-legacy.c.
7794 (open_symbol_file_object): Fix declaration in SunOS section
7796 (set_solib_svr4_fetch_link_map_offsets): New extern function.
7797 (init_fetch_link_map_offsets): New static function.
7798 (_initialize_svr4_solib): Put static global fetch_link_map_offsets
7799 under multiarch control.
7801 * config/alpha/alpha-linux.mt (TDEPFILES): Add solib-legacy.o to
7803 * config/alpha/fbsd.mh (NATDEPFILES): Likewise.
7804 * config/arm/linux.mt (TDEPFILES): Likewise.
7805 * config/i386/fbsd.mh (NATDEPFILES): Likewise.
7806 * config/i386/i386dgux.mh (NATDEPFILES): Likewise.
7807 * config/i386/i386gnu.mh (NATDEPFILES): Likewise.
7808 * config/i386/i386sco5.mh (NATDEPFILES): Likewise.
7809 * config/i386/i386sol2.mt (TDEPFILES): Likewise.
7810 * config/i386/i386v4.mh (NATDEPFILES): Likewise.
7811 * config/i386/i386v42mp.mh (NATDEPFILES): Likewise.
7812 * config/i386/linux.mt (TDEPFILES): Likewise.
7813 * config/i386/nbsd.mh (NATDEPFILES): Likewise.
7814 * config/i386/nbsdelf.mh (NATDEPFILES): Likewise.
7815 * config/i386/ncr3000.mt (TDEPFILES): Likewise.
7816 * config/i386/ptx4.mh (XDEPFILES): Likewise.
7817 * config/i386/sun386.mt (TDEPFILES): Likewise.
7818 * config/ia64/linux.mt (TDEPFILES): Likewise.
7819 * config/m68k/linux.mt (TDEPFILES): Likewise.
7820 * config/m68k/m68kv4.mh (NATDEPFILES): Likewise.
7821 * config/m68k/nbsd.mh (NATDEPFILES): Likewise.
7822 * config/m68k/sun2os4.mt (TDEPFILES): Likewise.
7823 * config/m68k/sun3os4.mt (TDEPFILES): Likewise.
7824 * config/m88k/delta88v4.mh (NATDEPFILES): Likewise.
7825 * config/mips/mipsv4.mh (NATDEPFILES): Likewise.
7826 * config/ns32k/nbsd.mh (NATDEPFILES): Likewise.
7827 * config/powerpc/linux.mt (TDEPFILES): Likewise.
7828 * config/powerpc/nbsd.mh (NATDEPFILES): Likewise.
7829 * config/powerpc/solaris.mh (NATDEPFILES): Likewise.
7830 * config/sh/linux.mt (TDEPFILES): Likewise.
7831 * config/sparc/linux.mt (TDEPFILES): Likewise.
7832 * config/sparc/nbsd.mh (NATDEPFILES): Likewise.
7833 * config/sparc/nbsdelf.mh (NATDEPFILES): Likewise.
7834 * config/sparc/sp64linux.mt (TDEPFILES): Likewise.
7835 * config/sparc/sun4os4.mt (TDEPFILES): Likewise.
7836 * config/sparc/sun4sol2.mh (NATDEPFILES): Likewise.
7840 * utils.c (xmrealloc, xcalloc): Return NULL for zero-sized requests.
7844 * MAINTAINERS (Write After Approval): Update Philip Blundell.
7848 * MAINTAINERS: Add myself to write after approval list.
7852 * i387-tdep.c (print_i387_status_word): Fix printing of Stack
7853 fault flag. It is bit 6 of the x87 FPU status word, not bit 7.
7857 * configure.host (m88*-harris-cxux*): Mark as obsolete.
7858 * configure.tgt: Ditto.
7859 * config/m88k/xm-cxux.h: Ditto.
7860 * config/m88k/tm-cxux.h: Ditto.
7861 * config/m88k/nm-cxux.h: Ditto.
7862 * config/m88k/cxux.mt: Ditto.
7863 * config/m88k/cxux.mh: Ditto.
7867 * Makefile.in: Delete rules for obsolete files.
7871 * stack.c (parse_frame_specification): For one argument case,
7872 handle the situation where the argument is an integer, not an
7873 address -- arguably the most common case. This matters on
7874 targets where pointers and addresses are different.
7878 * TODO: Revise 5.1 list. Delete PARAMS task. Add coding standard
7879 review. Clarify GNU/LINUX/sparc. Move other tasks to 5.2 or
7884 * TODO (GDB 5.1 Known Problems): Document problem of building GDB
7885 with SID on Solaris 8.
7889 * defs.h: Provide prototypes for floatformat_is_negative,
7890 floatformat_is_nan and floatformat_mantissa.
7891 * utils.c: Include "gdb_assert.h".
7892 (floatformat_is_negative): New function.
7893 (floatformat_is_nan): New function.
7894 (floatformat_mantissa): New function.
7895 * valprint.c: Include "floatformat.h".
7896 (print_floating): Get rid of the Linux-specific
7897 TARGET_ANALYZE_FLOATING macro and rewrite NaN detection with the
7898 help these new functions. Print NaN's in a format conforming to
7903 * top.c (init_main): Make `set history file name' complete on file
7908 * Makefile.in (LINTFLAGS): Update to contain all of the macros
7909 which define include paths used when compiling.
7911 * util.c (savestring, msavestring): Change type of length argument.
7912 * defs.h (savestring, msavestring): Update to match.
7914 * symtab.h (decode_line_1): Removed declaration.
7916 * symfile.c (#include <assert.h>): Removed.
7918 * arch-utils.c (#include <ctype.h>): Removed.
7919 * c-typeprint.c: Likewise.
7920 * dbxread.c: Likewise.
7921 * gdbtypes.c: Likewise.
7922 * target.c: Likewise.
7923 * os9kread.c: Likewise.
7925 * c-valprint.c (#include "demangle.h"): Removed.
7926 * ch-typeprint.c: Likewise.
7928 * f-typeprint.c: Likewise.
7929 * f-valprint.c: Likewise.
7930 * m2-typeprint.c: Likewise.
7931 * typeprint.c: Likewise.
7932 * p-typeprint.c: Likewise.
7933 * valarith.c: Likewise.
7934 * valprint.c: Likewise.
7936 * m2-typeprint.c (#include "gdb_string.h"): Removed.
7937 * nlmread.c: Likewise.
7939 * mdebugread.c (#include "gdb-stabs.h"): Removed.
7940 * minsyms.c: Likewise.
7941 * mipsread.c: Likewise.
7942 * nlmread.c: Likewise.
7944 * m2-typeprint.c (#include "obstack.h"): Removed.
7945 * m2-valprint.c: Likewise.
7947 * event-loop.c (#include <setjmp.h>): Removed.
7951 * MAINTAINERS: Remove self from specific maintenance domains
7952 (macos, gdbserver, documentation, testsuite).
7956 * 29k-share/udi/udip2soc.c, Makefile.in, a29k-tdep.c,
7957 a68v-nat.c, abug-rom.c, aclocal.m4, alpha-nat.c, alpha-tdep.c,
7958 annotate.c, annotate.h, arc-tdep.c, arch-utils.c,
7959 arch-utils.h, arm-tdep.c, ax-gdb.c, ax-gdb.h, ax-general.c,
7960 ax.h, bcache.c, bcache.h, blockframe.c, breakpoint.c,
7961 breakpoint.h, buildsym.c, buildsym.h, c-exp.y, c-lang.c,
7962 c-lang.h, c-typeprint.c, c-valprint.c, call-cmds.h, ch-exp.c,
7963 ch-lang.c, ch-lang.h, ch-typeprint.c, ch-valprint.c,
7964 cli/cli-cmds.h, cli/cli-decode.c, cli/cli-decode.h,
7965 cli/cli-script.c, cli/cli-script.h, cli/cli-setshow.h,
7966 cli/cli-utils.h, cli-out.c, cli-out.h, coff-solib.c,
7967 coff-solib.h, coffread.c, command.h, complaints.c,
7968 complaints.h, completer.c, completer.h,
7969 config/a29k/nm-ultra3.h, config/a29k/tm-a29k.h,
7970 config/a29k/tm-ultra3.h, config/a29k/tm-vx29k.h,
7971 config/a29k/xm-ultra3.h, config/alpha/nm-fbsd.h,
7972 config/alpha/nm-linux.h, config/alpha/nm-osf.h,
7973 config/alpha/nm-osf2.h, config/alpha/nm-osf3.h,
7974 config/alpha/tm-alpha.h, config/alpha/tm-alphalinux.h,
7975 config/alpha/xm-alphalinux.h, config/alpha/xm-alphaosf.h,
7976 config/alpha/xm-fbsd.h, config/arc/tm-arc.h,
7977 config/arm/nm-linux.h, config/arm/tm-arm.h,
7978 config/arm/tm-embed.h, config/d10v/tm-d10v.h,
7979 config/d30v/tm-d30v.h, config/fr30/tm-fr30.h,
7980 config/h8300/tm-h8300.h, config/h8500/tm-h8500.h,
7981 config/i386/nm-fbsd.h, config/i386/nm-gnu.h,
7982 config/i386/nm-i386bsd.h, config/i386/nm-i386mach.h,
7983 config/i386/nm-i386sco.h, config/i386/nm-i386sol2.h,
7984 config/i386/nm-i386v.h, config/i386/nm-i386v4.h,
7985 config/i386/nm-i386v42mp.h, config/i386/nm-linux.h,
7986 config/i386/nm-nbsd.h, config/i386/nm-nbsdelf.h,
7987 config/i386/nm-ptx4.h, config/i386/nm-sun386.h,
7988 config/i386/nm-symmetry.h, config/i386/tm-cygwin.h,
7989 config/i386/tm-fbsd.h, config/i386/tm-i386.h,
7990 config/i386/tm-i386aix.h, config/i386/tm-i386bsd.h,
7991 config/i386/tm-i386gnu.h, config/i386/tm-i386lynx.h,
7992 config/i386/tm-i386m3.h, config/i386/tm-i386mk.h,
7993 config/i386/tm-i386nw.h, config/i386/tm-i386os9k.h,
7994 config/i386/tm-i386sco5.h, config/i386/tm-i386sol2.h,
7995 config/i386/tm-i386v.h, config/i386/tm-i386v4.h,
7996 config/i386/tm-i386v42mp.h, config/i386/tm-linux.h,
7997 config/i386/tm-nbsd.h, config/i386/tm-ptx.h,
7998 config/i386/tm-ptx4.h, config/i386/tm-sun386.h,
7999 config/i386/tm-symmetry.h, config/i386/tm-vxworks.h,
8000 config/i386/xm-fbsd.h, config/i386/xm-i386bsd.h,
8001 config/i386/xm-i386gnu.h, config/i386/xm-i386m3.h,
8002 config/i386/xm-i386mach.h, config/i386/xm-i386mk.h,
8003 config/i386/xm-i386sco.h, config/i386/xm-i386v4.h,
8004 config/i386/xm-linux.h, config/i386/xm-nbsd.h,
8005 config/i386/xm-ptx.h, config/i386/xm-ptx4.h,
8006 config/i386/xm-sun386.h, config/i386/xm-symmetry.h,
8007 config/i960/tm-i960.h, config/i960/tm-mon960.h,
8008 config/i960/tm-nindy960.h, config/i960/tm-vx960.h,
8009 config/ia64/nm-aix.h, config/ia64/nm-linux.h,
8010 config/ia64/tm-aix.h, config/ia64/tm-ia64.h,
8011 config/ia64/tm-linux.h, config/ia64/xm-aix.h,
8012 config/ia64/xm-linux.h, config/m68k/nm-apollo68b.h,
8013 config/m68k/nm-delta68.h, config/m68k/nm-dpx2.h,
8014 config/m68k/nm-hp300bsd.h, config/m68k/nm-hp300hpux.h,
8015 config/m68k/nm-linux.h, config/m68k/nm-sun3.h,
8016 config/m68k/tm-apollo68b.h, config/m68k/tm-cisco.h,
8017 config/m68k/tm-dpx2.h, config/m68k/tm-es1800.h,
8018 config/m68k/tm-hp300bsd.h, config/m68k/tm-hp300hpux.h,
8019 config/m68k/tm-isi.h, config/m68k/tm-linux.h,
8020 config/m68k/tm-m68k.h, config/m68k/tm-m68kv4.h,
8021 config/m68k/tm-mac.h, config/m68k/tm-monitor.h,
8022 config/m68k/tm-nbsd.h, config/m68k/tm-news.h,
8023 config/m68k/tm-os68k.h, config/m68k/tm-sun3.h,
8024 config/m68k/tm-vx68.h, config/m68k/xm-3b1.h,
8025 config/m68k/xm-apollo68b.h, config/m68k/xm-dpx2.h,
8026 config/m68k/xm-hp300bsd.h, config/m68k/xm-hp300hpux.h,
8027 config/m68k/xm-linux.h, config/m68k/xm-m68kv4.h,
8028 config/m68k/xm-mpw.h, config/m68k/xm-news.h,
8029 config/m68k/xm-sun2.h, config/m68k/xm-sun3.h,
8030 config/m68k/xm-sun3os4.h, config/m88k/nm-delta88v4.h,
8031 config/m88k/tm-delta88.h, config/m88k/tm-delta88v4.h,
8032 config/m88k/tm-m88k.h, config/m88k/xm-cxux.h,
8033 config/m88k/xm-delta88.h, config/m88k/xm-delta88v4.h,
8034 config/m88k/xm-dgux.h, config/mcore/tm-mcore.h,
8035 config/mips/nm-irix3.h, config/mips/nm-irix4.h,
8036 config/mips/nm-irix5.h, config/mips/nm-mips.h,
8037 config/mips/nm-news-mips.h, config/mips/tm-bigmips.h,
8038 config/mips/tm-embed.h, config/mips/tm-embed64.h,
8039 config/mips/tm-embedl.h, config/mips/tm-embedl64.h,
8040 config/mips/tm-irix3.h, config/mips/tm-irix5.h,
8041 config/mips/tm-mips.h, config/mips/tm-mips64.h,
8042 config/mips/tm-mipsm3.h, config/mips/tm-mipsv4.h,
8043 config/mips/tm-tx39.h, config/mips/tm-tx39l.h,
8044 config/mips/tm-vr4100.h, config/mips/tm-vr4300.h,
8045 config/mips/tm-vr4300el.h, config/mips/tm-vr4xxx.h,
8046 config/mips/tm-vr4xxxel.h, config/mips/tm-vr5000.h,
8047 config/mips/tm-vr5000el.h, config/mips/xm-irix3.h,
8048 config/mips/xm-irix4.h, config/mips/xm-irix5.h,
8049 config/mips/xm-mips.h, config/mips/xm-mipsm3.h,
8050 config/mips/xm-mipsv4.h, config/mips/xm-news-mips.h,
8051 config/mips/xm-riscos.h, config/mn10200/tm-mn10200.h,
8052 config/mn10300/tm-mn10300.h, config/nm-gnu.h,
8053 config/nm-linux.h, config/nm-lynx.h, config/nm-m3.h,
8054 config/nm-sysv4.h, config/none/nm-none.h,
8055 config/none/tm-none.h, config/none/xm-none.h,
8056 config/ns32k/nm-nbsd.h, config/ns32k/nm-umax.h,
8057 config/ns32k/tm-merlin.h, config/ns32k/tm-nbsd.h,
8058 config/ns32k/tm-ns32km3.h, config/ns32k/tm-umax.h,
8059 config/ns32k/xm-merlin.h, config/ns32k/xm-ns32km3.h,
8060 config/pa/nm-hppab.h, config/pa/nm-hppah.h,
8061 config/pa/nm-hppao.h, config/pa/tm-hppa.h,
8062 config/pa/tm-hppa64.h, config/pa/tm-hppah.h,
8063 config/pa/xm-hppab.h, config/pa/xm-hppah.h,
8064 config/powerpc/nm-aix.h, config/powerpc/nm-linux.h,
8065 config/powerpc/nm-macos.h, config/powerpc/nm-nbsd.h,
8066 config/powerpc/tm-cygwin.h, config/powerpc/tm-linux.h,
8067 config/powerpc/tm-macos.h, config/powerpc/tm-ppc-aix.h,
8068 config/powerpc/tm-ppc-eabi.h, config/powerpc/tm-ppc-nw.h,
8069 config/powerpc/tm-ppcle-eabi.h, config/powerpc/tm-solaris.h,
8070 config/powerpc/xm-aix.h, config/powerpc/xm-linux.h,
8071 config/powerpc/xm-mpw.h, config/rs6000/nm-rs6000.h,
8072 config/rs6000/tm-rs6000.h, config/rs6000/tm-rs6000ly.h,
8073 config/rs6000/xm-aix4.h, config/rs6000/xm-rs6000.h,
8074 config/sh/tm-linux.h, config/sh/tm-sh.h, config/sh/tm-wince.h,
8075 config/sparc/nm-linux.h, config/sparc/nm-nbsd.h,
8076 config/sparc/nm-nbsdelf.h, config/sparc/nm-sparclynx.h,
8077 config/sparc/nm-sun4os4.h, config/sparc/nm-sun4sol2.h,
8078 config/sparc/tm-linux.h, config/sparc/tm-sp64.h,
8079 config/sparc/tm-sp64sim.h, config/sparc/tm-sparc.h,
8080 config/sparc/tm-sparclet.h, config/sparc/tm-sparclite.h,
8081 config/sparc/tm-sparclynx.h, config/sparc/tm-spc-em.h,
8082 config/sparc/tm-sun4os4.h, config/sparc/tm-sun4sol2.h,
8083 config/sparc/xm-sun4os4.h, config/sparc/xm-sun4sol2.h,
8084 config/tic80/tm-tic80.h, config/tm-linux.h, config/tm-lynx.h,
8085 config/tm-sysv4.h, config/v850/tm-v850.h, config/vax/tm-vax.h,
8086 config/w65/tm-w65.h, config/xm-aix4.h, config/xm-lynx.h,
8087 config/xm-mpw.h, config/xm-nbsd.h, config/xm-sysv4.h,
8088 config/z8k/tm-z8k.h, configure.in, core-aout.c, core-regset.c,
8089 core-sol2.c, corefile.c, corelow.c, cp-valprint.c,
8090 cpu32bug-rom.c, cxux-nat.c, d10v-tdep.c, d30v-tdep.c,
8091 dbug-rom.c, dbxread.c, dcache.c, dcache.h, defs.h,
8092 delta68-nat.c, demangle.c, dink32-rom.c, dpx2-nat.c, dsrec.c,
8093 dstread.c, dve3900-rom.c, dwarf2read.c, dwarfread.c,
8094 elfread.c, environ.c, environ.h, eval.c, event-loop.c,
8095 event-loop.h, event-top.c, exec.c, expprint.c, f-exp.y,
8096 f-lang.c, f-lang.h, f-typeprint.c, f-valprint.c, findvar.c,
8097 fork-child.c, fr30-tdep.c, frame.c, frame.h, gdb-events.c,
8098 gdb-events.h, gdb-events.sh, gdb-stabs.h, gdb.1, gdb_string.h,
8099 gdb_thread_db.h, gdbcmd.h, gdbcore.h, gdbserver/Makefile.in,
8100 gdbserver/gdbreplay.c, gdbserver/gdbserver.1,
8101 gdbserver/low-hppabsd.c, gdbserver/low-linux.c,
8102 gdbserver/low-lynx.c, gdbserver/low-nbsd.c,
8103 gdbserver/low-sim.c, gdbserver/low-sparc.c,
8104 gdbserver/low-sun3.c, gdbserver/remote-utils.c,
8105 gdbserver/server.c, gdbserver/server.h, gdbserver/utils.c,
8106 gdbthread.h, gdbtypes.c, gdbtypes.h, gnu-nat.c, gnu-nat.h,
8107 gnu-regex.c, gnu-regex.h, h8300-tdep.c, h8500-tdep.c,
8108 hp-psymtab-read.c, hp-symtab-read.c, hp300ux-nat.c,
8109 hppa-tdep.c, hppab-nat.c, hppah-nat.c, hppam3-nat.c, hpread.c,
8110 hpread.h, hpux-thread.c, i386-tdep.c, i386aix-nat.c,
8111 i386b-nat.c, i386gnu-nat.c, i386ly-tdep.c, i386m3-nat.c,
8112 i386mach-nat.c, i386nbsd-nat.c, i386nbsd-tdep.c, i386v-nat.c,
8113 i386v4-nat.c, i387-tdep.c, i960-tdep.c, infcmd.c, inferior.h,
8114 inflow.c, infptrace.c, infrun.c, inftarg.c, infttrace.c,
8115 irix4-nat.c, irix5-nat.c, isi-xdep.c, jv-exp.y, jv-lang.c,
8116 jv-lang.h, jv-typeprint.c, jv-valprint.c, kdb-start.c,
8117 kod-cisco.c, kod.c, language.c, language.h, lin-thread.c,
8118 linespec.c, linespec.h, linux-thread.c, lynx-nat.c, m2-exp.y,
8119 m2-lang.c, m2-lang.h, m2-typeprint.c, m2-valprint.c, m3-nat.c,
8120 m32r-rom.c, m32r-tdep.c, m68k-tdep.c, m68klinux-nat.c,
8121 m68knbsd-nat.c, m88k-nat.c, m88k-tdep.c, mac-nat.c,
8122 mac-xdep.c, main.c, maint.c, mcore-rom.c, mcore-tdep.c,
8123 mdebugread.c, mem-break.c, minimon.h, minsyms.c, mips-nat.c,
8124 mips-tdep.c, mipsm3-nat.c, mipsread.c, mipsv4-nat.c,
8125 mn10200-tdep.c, mn10300-tdep.c, mon960-rom.c, monitor.c,
8126 monitor.h, news-xdep.c, nindy-share/env.h, nindy-tdep.c,
8127 nlm/Makefile.in, nlmread.c, ns32k-tdep.c, ns32km3-nat.c,
8128 ns32knbsd-nat.c, objfiles.c, objfiles.h, ocd.c, ocd.h,
8129 op50-rom.c, os9kread.c, osfsolib.c, p-exp.y, pa64solib.c,
8130 pa64solib.h, parse.c, parser-defs.h, partial-stab.h,
8131 ppc-bdm.c, ppc-linux-nat.c, ppc-linux-tdep.c, ppcbug-rom.c,
8132 ppcnbsd-nat.c, printcmd.c, proc-api.c, proc-events.c,
8133 proc-flags.c, proc-utils.h, proc-why.c, procfs.c, ptx4-nat.c,
8134 rdi-share/Makefile.in, rdi-share/aclocal.m4, regcache.c,
8135 regcache.h, remote-adapt.c, remote-array.c, remote-bug.c,
8136 remote-e7000.c, remote-eb.c, remote-es.c, remote-est.c,
8137 remote-hms.c, remote-mips.c, remote-mm.c, remote-nindy.c,
8138 remote-nrom.c, remote-os9k.c, remote-rdi.c, remote-rdp.c,
8139 remote-sds.c, remote-sim.c, remote-st.c, remote-udi.c,
8140 remote-utils.c, remote-utils.h, remote-vx.c, remote.c,
8141 remote.h, reply_mig_hack.awk, rom68k-rom.c, rs6000-nat.c,
8142 rs6000-tdep.c, scm-exp.c, scm-lang.c, scm-lang.h, scm-tags.h,
8143 scm-valprint.c, ser-e7kpc.c, ser-mac.c, ser-ocd.c, ser-pipe.c,
8144 ser-tcp.c, ser-unix.c, serial.c, serial.h, sh-tdep.c,
8145 sh3-rom.c, sol-thread.c, solib-aix5.c, solib-svr4.c, solib.c,
8146 solib.h, solist.h, somread.c, somsolib.c, somsolib.h,
8147 source.c, sparc-nat.c, sparc-tdep.c, sparcl-tdep.c,
8148 sparclet-rom.c, srec.h, stabsread.c, stabsread.h, stack.c,
8149 standalone.c, stop-gdb.c, stuff.c, sun3-nat.c, sun386-nat.c,
8150 symfile.c, symfile.h, symm-nat.c, symm-tdep.c, symmisc.c,
8151 symtab.c, symtab.h, target.c, target.h, terminal.h, thread.c,
8152 tic80-tdep.c, top.c, top.h, tracepoint.c, tracepoint.h,
8153 typeprint.c, ui-file.c, ui-file.h, ui-out.h, ultra3-nat.c,
8154 ultra3-xdep.c, umax-xdep.c, utils.c, v850-tdep.c, v850ice.c,
8155 valarith.c, valops.c, valprint.c, value.h, values.c, varobj.h,
8156 vax-tdep.c, version.h, vx-share/vxWorks.h, vx-share/xdr_ld.c,
8157 vx-share/xdr_ptrace.c, vx-share/xdr_ptrace.h,
8158 vx-share/xdr_rdb.c, w65-tdep.c, w89k-rom.c, win32-nat.c,
8159 wrapper.c, wrapper.h, xcoffread.c, xcoffsolib.c, xcoffsolib.h,
8160 xmodem.c, xmodem.h, z8k-tdep.c: Update/correct copyright
8165 * acconfig.h (HAVE_PRSYSENT_T, HAVE_PR_SIGSET_T,
8166 HAVE_PR_SIGACTION64_T, HAVE_PR_SIGINFO64_T): New configure
8168 * configure.in (prsysent_t, pr_sigset_t, pr_sigaction64_t,
8169 pr_siginfo64_t): Test for these typedefs in <sys/procfs.h>.
8170 (sys/fault.h, sys/select.h): Test for presence of these
8172 (ia64-*-aix*): Define NEW_PROC_API for this host.
8173 * configure: Regenerate.
8174 * config.in: Regenerate.
8176 * configure.host (ia64-*-aix*): New host.
8177 * configure.tgt (ia64-*-aix*): New target.
8181 * TODO (GDB 5.1 Known Problems): Document z8k as broken.
8185 * wince.c: Change realloc to xrealloc throughout.
8186 (handle_load_dll): Use void * rather than PTR in argument.
8190 * ocd.h (ocd_xfer_memory): Add ``attrib'' parameter.
8191 * ocd.c (ocd_xfer_memory): Ditto.
8192 * ser-ocd.c (ocd_setstopbits): New function. Add to ocd_ops.
8193 * MAINTAINERS: Document powerpc-eabi and powerpcle-eabi as
8194 buildable with ,-Werror.
8196 * Makefile.in (symfile_h): Define.
8197 (mcore-tdep.o): Add $(symfile_h), $(gdbcore_h) and $(inferior_h).
8198 * mcore-tdep.c: Include "symfile.h", "gdbcore.h" and "inferior.h".
8199 * MAINTAINERS: Document mcore-elf and mcore-pe as buildable with
8202 * dsrec.c (make_srec): Fix internal_error fmt arg.
8203 * MAINTAINERS: Document i960-coff as buildable with ,-Werror.
8207 * solib-aix5.c (aix5_relocate_main_executable): Don't use ANOFFSET
8212 * MAINTAINERS (paper trail): Update.
8214 * CONTRIBUTE: Update note on ``Fix PR gdb/4706'' convention.
8219 * mn10200-tdep.c (mn10200_frame_chain): Pass 0 for ``pc''
8220 parameter to mn10200_analyze_prologue.
8222 * config/mn10200/tm-mn10200.h: Include "regcache.h".
8223 * MAINTAINERS: Document that mn10200-elf target is buildable.
8227 * config/ia64/xm-aix.h (GDB_GREGSET_T, GDB_FPREGSET_T): Move defines
8229 * config/ia64/nm-aix.h (GDB_GREGSET_T, GDB_FPREGSET_T): ...to here.
8230 (MONTEREY): Don't define.
8235 * config/mn10300/tm-mn10300.h (E0_REGNUM): Correct to 15.
8239 * sparc-nat.c (sparc-nat.c): Don't include self.
8243 * defs.h (__CYGWIN__): Moved conditional which defines __CYGWIN__
8244 if __CYGWIN32__ is set from here.
8245 * config/i386/xm-cygwin.h: To here.
8246 * config/powerpc/xm-cygwin.h: To here.
8248 * i386-stub.c (handle_exception): Use 'T' response packet.
8252 * m32r-tdep.c: Fix cut and paste error in comment.
8256 * symtab.c (print_msymbol_info): Print addresses by portable method
8257 longest_local_hex_string_custom. Allow for 64-bit addresses.
8261 * gdbtypes.h (builtin_type_f_integer): Removed duplicate declaration.
8262 (MAX_OF_TYPE): Wrap macro definition in parenthesis.
8263 (MIN_OF_TYPE): Likewise.
8265 * memattr.h (mem_access_mode): Removed extraneous trailing comma.
8269 * Makefile.in (os9kread.o): Do not compile with WERROR_CFLAGS.
8270 * os9kread.c (os9k_process_one_symbol): Add assert to detect
8271 ``loses if sizeof (char *) > sizeof (int)''.
8275 * gdb_assert.h: Document pragmatics behind gdb_assert's case.
8279 * Makefile.in (gdbtk-cmds.o): Add $(regcache_h) to dependency
8285 * Makefile.in (regcache_h): Define. Add $(regcache_h) to
8290 * printcmd.c (print_address_numeric): Update comments to refer
8291 to sizeof addr, not sizeof pointer.
8292 (x_command): Remove needless whitespace (shorten long line).
8294 * breakpoint.c (print_one_breakpoint): Formatting clean-up.
8295 (read_memory_nobpt): Ditto.
8296 (ep_is_catchpoint): Ditto.
8297 (ep_is_shlib_catchpoint): Ditto.
8298 (ep_is_exception_catchpoint): Ditto.
8299 (describe_other_breakpoints): Ditto.
8303 * regcache.h (register_valid): Fix comment documenting valid
8308 From Steven Johnson:
8309 * regcache.h: New file.
8311 * value.h (read_register_bytes, read_register_gen)
8312 (write_register_gen, write_register_bytes)
8313 (read_register, read_register_pid)
8314 (read_signed_register, read_signed_register_pid)
8315 (write_register, write_register_pid)
8316 (register_cached, set_register_cached)
8317 (register_changed, register_buffer)
8318 (registers_changed, supply_register): Move declaration from here.
8319 * regcache.h: To here.
8320 * gdbcore.h (registers_fetched): Ditto.
8321 * inferior.h (registers, registers_valid): Ditto.
8323 * regcache.c (generic_target_read_pc, read_pc_pid, read_pc,
8324 generic_target_write_pc, write_pc_pid, write_pc,
8325 generic_target_read_sp, read_sp, generic_target_write_sp,
8326 write_sp, generic_target_read_fp, read_fp,
8327 generic_target_write_fp, write_fp): Add note that these functions
8328 will be moved from this file.
8330 * a29k-tdep.c: Include "regcache.h".
8331 * a68v-nat.c: Ditto.
8332 * abug-rom.c: Ditto.
8333 * alpha-nat.c: Ditto.
8334 * alpha-tdep.c: Ditto.
8335 * alphabsd-nat.c: Ditto.
8336 * arc-tdep.c: Ditto.
8337 * arm-linux-nat.c: Ditto.
8338 * arm-linux-tdep.c: Ditto.
8339 * arm-tdep.c: Ditto.
8340 * blockframe.c: Ditto.
8341 * core-aout.c: Ditto.
8342 * core-sol2.c: Ditto.
8344 * cpu32bug-rom.c: Ditto.
8345 * cxux-nat.c: Ditto.
8346 * d10v-tdep.c: Ditto.
8347 * d30v-tdep.c: Ditto.
8348 * dbug-rom.c: Ditto.
8349 * dink32-rom.c: Ditto.
8350 * dve3900-rom.c: Ditto.
8352 * fr30-tdep.c: Ditto.
8354 * go32-nat.c: Ditto.
8355 * h8300-tdep.c: Ditto.
8356 * h8500-tdep.c: Ditto.
8357 * hp300ux-nat.c: Ditto.
8358 * hppa-tdep.c: Ditto.
8359 * hppab-nat.c: Ditto.
8360 * hppah-nat.c: Ditto.
8361 * hppam3-nat.c: Ditto.
8362 * hpux-thread.c: Ditto.
8363 * i386-linux-nat.c: Ditto.
8364 * i386-linux-tdep.c: Ditto.
8365 * i386-tdep.c: Ditto.
8366 * i386aix-nat.c: Ditto.
8367 * i386b-nat.c: Ditto.
8368 * i386bsd-nat.c: Ditto.
8369 * i386gnu-nat.c: Ditto.
8370 * i386ly-tdep.c: Ditto.
8371 * i386m3-nat.c: Ditto.
8372 * i386mach-nat.c: Ditto.
8373 * i386nbsd-nat.c: Ditto.
8374 * i386v4-nat.c: Ditto.
8375 * i387-nat.c: Ditto.
8376 * i387-tdep.c: Ditto.
8377 * i960-tdep.c: Ditto.
8378 * ia64-aix-nat.c: Ditto.
8379 * ia64-linux-nat.c: Ditto.
8380 * ia64-tdep.c: Ditto.
8381 * infptrace.c: Ditto.
8383 * irix4-nat.c: Ditto.
8384 * irix5-nat.c: Ditto.
8386 * lin-thread.c: Ditto.
8387 * lynx-nat.c: Ditto.
8389 * m32r-rom.c: Ditto.
8390 * m32r-tdep.c: Ditto.
8391 * m68hc11-tdep.c: Ditto.
8392 * m68k-tdep.c: Ditto.
8393 * m68klinux-nat.c: Ditto.
8394 * m68knbsd-nat.c: Ditto.
8395 * m68knbsd-tdep.c: Ditto.
8396 * m88k-nat.c: Ditto.
8397 * m88k-tdep.c: Ditto.
8399 * mcore-rom.c: Ditto.
8400 * mcore-tdep.c: Ditto.
8401 * mi/mi-main.c: Ditto.
8402 * mips-nat.c: Ditto.
8403 * mips-tdep.c: Ditto.
8404 * mipsm3-nat.c: Ditto.
8405 * mipsv4-nat.c: Ditto.
8406 * mn10200-tdep.c: Ditto.
8407 * mn10300-tdep.c: Ditto.
8409 * ns32km3-nat.c: Ditto.
8410 * ns32knbsd-nat.c: Ditto.
8412 * pa64solib.c: Ditto.
8414 * ppc-linux-nat.c: Ditto.
8415 * ppc-linux-tdep.c: Ditto.
8416 * ppcbug-rom.c: Ditto.
8417 * ppcnbsd-nat.c: Ditto.
8418 * ptx4-nat.c: Ditto.
8419 * regcache.c: Ditto.
8420 * remote-adapt.c: Ditto.
8421 * remote-array.c: Ditto.
8422 * remote-bug.c: Ditto.
8423 * remote-e7000.c: Ditto.
8424 * remote-eb.c: Ditto.
8425 * remote-es.c: Ditto.
8426 * remote-est.c: Ditto.
8427 * remote-hms.c: Ditto.
8428 * remote-mips.c: Ditto.
8429 * remote-mm.c: Ditto.
8430 * remote-nindy.c: Ditto.
8431 * remote-os9k.c: Ditto.
8432 * remote-rdi.c: Ditto.
8433 * remote-rdp.c: Ditto.
8434 * remote-sds.c: Ditto.
8435 * remote-sim.c: Ditto.
8436 * remote-st.c: Ditto.
8437 * remote-udi.c: Ditto.
8438 * remote-utils.c: Ditto.
8439 * remote-vx.c: Ditto.
8440 * remote-vx29k.c: Ditto.
8441 * remote-vx68.c: Ditto.
8442 * remote-vx960.c: Ditto.
8443 * remote-vxmips.c: Ditto.
8444 * remote-vxsparc.c: Ditto.
8446 * rom68k-rom.c: Ditto.
8447 * rs6000-nat.c: Ditto.
8448 * rs6000-tdep.c: Ditto.
8451 * sol-thread.c: Ditto.
8452 * solib-svr4.c: Ditto.
8453 * somsolib.c: Ditto.
8454 * sparc-nat.c: Ditto.
8455 * sparc-tdep.c: Ditto.
8456 * sparcl-tdep.c: Ditto.
8457 * sparclet-rom.c: Ditto.
8458 * sun3-nat.c: Ditto.
8459 * sun386-nat.c: Ditto.
8460 * symm-nat.c: Ditto.
8462 * thread-db.c: Ditto.
8464 * tic80-tdep.c: Ditto.
8465 * tracepoint.c: Ditto.
8466 * ultra3-nat.c: Ditto.
8467 * umax-xdep.c: Ditto.
8468 * uw-thread.c: Ditto.
8469 * v850-tdep.c: Ditto.
8472 * w65-tdep.c: Ditto.
8473 * w89k-rom.c: Ditto.
8474 * win32-nat.c: Ditto.
8476 * z8k-tdep.c: Ditto.
8480 * MAINTAINERS: Add Matt Hiller to Write After Approval list.
8484 * mn10300-tdep.c (mn10300_stab_reg_to_regnum): New function.
8485 (mn10300_gdbarch_init): Set appropriate elements of gdbarch to
8486 mn10300_stab_reg_to_regnum.
8490 * symtab.c (search_symbols): Fix off by one error in test for
8495 * config/sparc/sp64linux.mt: New file.
8496 * configure.tgt: Recognize sparc64-*-linux* as a sp64linux target.
8497 * configure.host: Recognize sparc64-*-linux* as a linux host.
8500 * config/sparc/tm-sp64linux.h: New file.
8504 * buildsym.c (push_subfile, pop_subfile): Replace call to abort()
8505 with call to internal_error().
8506 * dbxread.c (process_one_symbol): Likewise.
8507 * exec.c (build_section_table, xfer_memory): Likewise.
8508 * h8500-tdep.c (h8500_register_size, h8500_register_virtual_type):
8510 * hpread.c (hpread_type_translate, hpread_read_array_type)
8511 (hpread_type_lookup): Likewise.
8512 * i386-tdep.c (gdb_print_insn_i386): Likewise.
8513 * i960-tdep.c (mem): Likewise
8514 * inflow.c (set_sigio_trap, clear_sigio_trap): Likewise.
8515 * infptrace.c (child_resume): Likewise.
8516 * infttrace.c (_initialize_infttrace): Likewise.
8517 * language.c (binop_result_type, add_language): Likewise.
8518 * lynx-nat.c (store_inferior_registers): Likewise.
8519 * m3-nat.c (port_chain_insert, m3_trace_me): Likewise.
8520 * mdebugread.c (parse_partial_symbols): Likewise.
8521 * monitor.c (monitor_printf_noecho, monitor_printf)
8522 (monitor_dump_regs): Likewise.
8523 * ocd.c (stu_put_packet): Likewise.
8524 * printcmd.c (decode_format, print_scalar_formatted): Likewise.
8525 * remote-bug.c (bug_open): Likewise.
8526 * remote-e7000.c (fetch_regs_from_dump, e7000_wait): Likewise.
8527 * remote-es.c (es1800_read_bytes): Likewise.
8528 * remote-mips.c (common_breakpoint): Likewise.
8529 * remote-rdp.c (send_rdp): Likewise.
8530 * remote-sds.c (putmessage): Likewise.
8531 * sparc-nat.c (fetch_inferior_registers, store_inferior_registers):
8533 * sparcl-tdep.c (sparclite_download): Likewise.
8534 * symtab.c (lookup_partial_symbol): Likewise.
8535 * target.c (push_target, pop_target, initialize_targets): Likewise.
8536 * utils.c (internal_verror, malloc_botch, wrap_here, decimal2str):
8538 * valprint.c (print_decimal, print_longest, print_longest)
8539 (strcat_longest): Likewise.
8540 * w65-tdep.c (init_frame_pc, w65_push_dummy_frame): Likewise.
8541 * xmodem.c (xmodem_send_packet): Likewise.
8542 * z8k-tdep.c (init_frame_pc, z8k_push_dummy_frame): Likewise.
8543 * config/h8500/tm-h8500.h (STORE_STRUCT_RETURN): Likewise.
8544 * config/mn10200/tm-mn10200.h (EXTRACT_RETURN_VALUE)
8545 (STORE_RETURN_VALUE): Likewise.
8546 * config/ns32k/nm-umax.h (REGISTER_U_ADDR): Likewise.
8547 * config/ns32k/xm-merlin.h (REGISTER_U_ADDR): Likewise.
8548 * config/z8k/tm-z8k.h (STORE_STRUCT_RETURN, STORE_RETURN_VALUE):
8553 * CONTRIBUTE: Document how to cite a problem report.
8554 * TODO: Note need to replace CONTRIBUTE with generated file.
8556 * CONTRIBUTE: Mention that patches do not need to include the
8557 generated files gdbarch.h and gdbarch.c.
8561 * value.h (get_saved_register): Move from here.
8566 * solib.h (in_svr4_dynsym_resolve_code): Delete declaration.
8567 (in_solib_dynsym_resolve_code): Add declaration.
8568 (IN_SOLIB_DYNSYM_RESOLVE_CODE): Changed define to invoke
8569 in_solib_dynsym_resolve_code() rather than
8570 in_svr4_dynsym_resolve_code(). Also, removed the ifdefs
8571 which caused this macro to only be defined when
8572 SVR4_SHARED_LIBS is defined.
8573 * solib.c (in_solib_dynsym_resolve_code): New function.
8574 * solist.h (struct target_so_ops): Add new member
8575 in_dynsym_resolve_code.
8576 * solib-aix5.c (aix5_in_dynsym_resolve_code): Renamed from
8577 in_svr4_dynsym_resolve_code. Also, made static.
8578 (_initialize_aix5_solib): Initialize in_dynsym_resolve_code
8579 member in aix5_so_ops.
8580 * solib-svr4.c (svr4_in_dynsym_resolve_code): Renamed from
8581 in_svr4_dynsym_resolve_code. Also, added second version
8582 of this function which will be used when SVR4_SHARED_LIBS
8584 (_initialize_svr4_solib): Initialize in_dynsym_resolve_code
8585 member in svr4_so_ops.
8587 * ia64-aix-nat.c, ia64-aix-tdep.c, config/ia64/aix.mh,
8588 config/ia64/aix.mt, config/ia64/nm-aix.h, config/ia64/tm-aix.h,
8589 config/ia64/xm-aix.h: New files.
8590 * ia64-tdep.c (_initialize_ia64_tdep): Remove declaration.
8591 (ia64_aix_sigcontext_register_address): New declaration.
8592 (ia64_gdbarch_init): Provide for initialization of
8593 sigcontext_register_address member of struct tdep when
8594 on target is detected to be running AIX.
8595 * config/ia64/linux.mt (TDEPFILES): Add ia64-aix-tdep.o to
8600 * ia64-tdep.c (ia64_frameless_function_invocation): Implement.
8601 * config/ia64/linux.mh (NATDEPFILES): Use thread-db.o and lin-lwp.o
8602 for thread support instead of linux-thread.o and lin-thread.o.
8603 * config/ia64/nm-linux.h (PREPARE_TO_PROCEED, GET_THREAD_SIGNALS,
8604 ATTACH_LWP): Define to use the following lin-lwp.c functions...
8605 (lin_lwp_prepare_to_proceed, lin_thread_get_thread_signals,
8606 lin_lwp_attach_lwp): Declare.
8610 * mips-tdep.c (do_fp_register_row, do_fp_register_row): Fix printf
8615 * solib-aix5.c (solib-svr4.h): Remove include.
8616 (solib_break_names): Delete names which aren't actually
8618 (bkpt_names): Remove.
8619 (aix5_relocate_main_executable, bfd_lookup_symbol): Replace calls
8620 to STREQ() with equivalent calls to strcmp().
8621 (in_svr4_dynsym_resolve_code, enable_break, bfd_lookup_symbol,
8622 aix5_solib_create_inferior_hook): Revise comments.
8623 (enable_break): Remove old ``bkpt_names'' code.
8627 * Makefile.in (SFILES): Add frame.c .
8628 (COMMON_OBS): Add frame.o .
8629 (frame.o): New target.
8631 * frame.c (find_saved_register):
8632 (default_get_saved_register):
8633 (get_saved_register):
8634 (read_relative_register_raw_bytes_for_frame):
8635 (read_relative_register_raw_bytes): Moved to here.
8636 * regcache.c: From here.
8640 * solib-aix5.c: New file.
8644 * solib.c (info_sharedlibrary_command): Don't assume pointers
8645 are the same size of long, call longest_local_hex_string_custom().
8647 * solib-svr4.c (LM_ADDR): LM_ADDR is a signed offset, so
8648 extract_signed_integer() should be called instead of
8653 * MAINTAINERS: Add Martin Hunt to Write After Approval list.
8658 * mips-tdep.c (mips_register_raw_size): If FP_REGISTER_DOUBLE,
8659 then floating point registers are 8 bytes.
8663 * parse.c (write_exp_msymbol): Make the type CORE_ADDR, to
8664 accomodate 64-bit addresses.
8669 * symtab.c (lookup_symbol_aux): Call lookup_symbol_aux, not
8670 lookup_symbol, when trying to find a symbol with a mangled name,
8671 to avoid infinite recursion.
8675 * TODO (5.2): Mention G++ 3.0 ABI. General cleanups.
8679 * arm-tdep.c (check_prologue_cache): Fix off by 1 error.
8680 (save_prologue_cache): Ditto.
8685 * partial-stab.h (switch): Check that pst is not null
8686 before dereferencing it.
8691 * symfile.c (add_symbol_file_command): Always initialize
8692 my_cleanup using a NULL cleanup.
8696 * demangle.c (demangling_style_names): New variable.
8697 (_initialize_demangler): Fill demangling_style_names with the
8698 names of known demangling styles from libiberty_demanglers[]. Use
8699 add_set_enum_cmd instead of add_set_cmd, to get completion on
8700 demangling style names.
8702 * proc-api.c (_initialize_proc_api): Make `procfs-file' use
8703 file-name completion.
8705 * remote-rdi.c (_initialize_remote_rdi): Ditto for `rdilogfile'.
8707 * solib.c (_initialize_solib): Ditto for `solib-search-path' and
8708 `solib-absolute-prefix'.
8710 * tracepoint.c (_initialize_tracepoint): Ditto for
8713 * win32-nat.c (_initialize_inftarg): Ditto for `dll-symbols'.
8715 * cli/cli-cmds.c (init_cli_cmds): Make `shell' and `make' use
8716 file-name completion.
8718 * infcmd.c (_initialize_infcmd): Make the following commands use
8719 the file-name completer: `tty', `args', `path', `paths', and
8724 * go32-nat.c: Include i387-nat.h.
8725 (fetch_register): New function, uses some of the guts of
8726 go32_fetch_registers and calls i387_supply_register.
8727 (go32_fetch_registers): Most of the code moved into
8728 fetch_register. Use i387_supply_fsave.
8729 (store_register): Use i387_fill_fsave instead of custom code.
8730 (go32_store_registers): Use i387_fill_fsave.
8732 * Makefile.in (go32-nat.o): Depend on i387-nat.h.
8734 * config/i386/go32.mh (NATDEPFILES): Add i387-nat.o.
8736 * completer.c (gdb_completer_file_name_break_characters): Remove
8737 slash from file-name break characters.
8738 [__MSDOS__]: Special definition for DOS/Windows file names.
8739 (line_completion_function): When completing on file names, bump
8740 `p' to the first file-name constituent character of `word', before
8741 invoking the completer.
8745 * i387-nat.c: Include "i387-nat.h". Use regnum instead of regno
8746 consistently for parameter names. Fix comments accordingly.
8747 (i387_supply_register): New function.
8748 (i387_supply_fsave): Implement using i387_supply_register.
8749 * i387-nat.h: Use regnum instead of regno consistently for
8750 parameter names. Fix comments accordingly.
8751 (i387_supply_register): New prototype.
8755 * remote.c (build_remote_gdbarch_data): Use new TARGET_ADDR_BIT
8756 instead of TARGET_PTR_BIT (to support Harvard architectures).
8761 * hpux-thread.c (hpux_thread_xfer_memory): Add mem_attrib
8762 argument to parameter list and to call in order to conform to
8763 to_xfer_memory field of struct target_ops.
8767 * somsolib.c (som_solib_add_solib_objfile): Do not use
8768 section relocation feature of syms_from_objfile. Do my own
8769 section relocation, offsetting each section of the som by
8770 either text_addr - text_link_addr or data_start.
8774 * TODO (5.1): Move ``Hardware watchpint problems'' out of 5.1.
8778 * MAINTAINERS (paper trail): Update.
8782 * target.h (target_fetch_registers): Fix comment.
8786 * f-exp.y: Include <ctype.h>.
8787 (parse_number): Ensure that ``i'' is always initialized.
8791 * MAINTAINERS: Add myself to paper trail section.
8795 * configure.in (AC_CHECK_HEADERS): Add sys/file.h.
8796 * configure, config.in: Regenerate.
8797 * corelow.c: Include <sys/file.h> if present.
8801 * inflow.c (terminal_ours_1): Initialize ``osigtou''. Only
8802 declare when have SIGTTOU.
8806 * config/djgpp/fnchange.lst: Add entries for gdb/gdbtk/*/ChangeLog-*.
8810 * MAINTAINERS: Update my email address.
8814 * NEWS: Document that "info symbol" works with COFF debug info and
8817 * minsyms.c (lookup_minimal_symbol_by_pc_section): Don't skip
8818 symbols whose SYMBOL_BFD_SECTION is NULL.
8822 Get rid of AIX specific PC_LOAD_SEGMENT, replace with PC_SOLIB.
8823 * xcoffsolib.c (xcoff_solib_address): Renamed from
8824 pc_load_segment_name. Return NULL if address is not in a shared
8825 library. Cleanup shared library name construction, using xasprintf.
8826 Format shared library member names consistent with format in exec.c.
8827 (solib_info): Format shared library member names consistent with
8829 * config/rs6000/nm-rs6000.h: Replace PC_LOAD_SEGMENT with PC_SOLIB,
8830 using xcoff_solib_address for PC_SOLIB definition.
8831 * stack.c (print_frame): Remove PC_LOAD_SEGMENT code, no longer
8836 * mipsread.c (read_alphacoff_dynamic_symtab): Replace alloca calls
8837 with xmalloc calls and cleanups.
8841 * rs6000-nat.c (child_xfer_memory): Add missing parameter
8842 'struct mem_attrib *' required by 2001-01-23 change.
8846 Updates to "make TAGS":
8847 * Makefile.in (ALLDEPFILES): Remove altos-xdep.c arm-convert.s
8848 arm-xdep.c convex-tdep.c convex-xdep.c pyr-tdep.c pyr-xdep.c
8850 (TAGFILES_NO_SRCDIR): Add $(SUBDIR_CLI_SRCS).
8854 * config/djgpp/fnchange.lst: Remove extraneous "too many dots".
8859 * defs.h (continuation): Remove unused global variable.
8863 * configure.tgt: Remove references to convex, pyramid, altos and
8865 * configure.host: Ditto.
8866 * MAINTAINERS: Ditto.
8869 * tahoe-tdep.c: Delete obsolete file.
8870 * pyr-xdep.c: Ditto.
8871 * pyr-tdep.c: Ditto.
8872 * convex-tdep.c: Ditto.
8873 * convex-xdep.c: Ditto.
8874 * config/tahoe/xm-tahoe.h: Ditto.
8875 * config/tahoe/tm-tahoe.h: Ditto.
8876 * config/tahoe/tahoe.mt: Ditto.
8877 * config/tahoe/tahoe.mh: Ditto.
8878 * config/pyr/xm-pyr.h: Ditto.
8879 * config/pyr/tm-pyr.h: Ditto.
8880 * config/pyr/pyramid.mt: Ditto.
8881 * config/pyr/pyramid.mh: Ditto.
8882 * config/m68k/xm-altos.h: Ditto.
8883 * config/m68k/tm-altos.h: Ditto.
8884 * config/m68k/altos.mt: Ditto.
8885 * config/m68k/altos.mh: Ditto.
8886 * config/convex/xm-convex.h: Ditto.
8887 * config/convex/tm-convex.h: Ditto.
8888 * config/convex/convex.mt: Ditto.
8889 * config/convex/convex.mh: Ditto.
8890 * config/convex/Convex.notes: Ditto.
8891 * config/arm/xm-arm.h: Ditto.
8892 * config/arm/nm-arm.h: Ditto.
8893 * config/arm/arm.mt: Ditto.
8894 * config/arm/arm.mh: Ditto.
8895 * arm-convert.s: Ditto.
8896 * arm-xdep.c: Ditto.
8897 * altos-xdep.c: Ditto.
8901 * defs.h (internal_error, internal_verror): Add __FILE__ and
8903 * utils.c (internal_error, internal_verror): Update.
8905 * v850-tdep.c: Update calls to internal_error.
8911 * symm-nat.c: Ditto.
8912 * sparc-tdep.c: Ditto.
8915 * rs6000-tdep.c: Ditto.
8916 * rs6000-nat.c: Ditto.
8918 * remote-vx.c: Ditto.
8919 * remote-sim.c: Ditto.
8920 * remote-mips.c: Ditto.
8921 * regcache.c: Ditto.
8922 * objfiles.h: Ditto.
8923 * objfiles.c: Ditto.
8924 * mn10300-tdep.c: Ditto.
8925 * mips-tdep.c: Ditto.
8927 * m68k-tdep.c: Ditto.
8929 * language.c: Ditto.
8930 * infptrace.c: Ditto.
8931 * inferior.h: Ditto.
8933 * ia64-tdep.c: Ditto.
8934 * i386-tdep.c: Ditto.
8935 * i386-linux-nat.c: Ditto.
8936 * hppah-nat.c: Ditto.
8937 * go32-nat.c: Ditto.
8941 * event-loop.c: Ditto.
8942 * dwarf2read.c: Ditto.
8944 * d30v-tdep.c: Ditto.
8945 * d10v-tdep.c: Ditto.
8946 * cli/cli-setshow.c: Ditto.
8947 * cli/cli-script.c: Ditto.
8949 * breakpoint.c: Ditto.
8951 * arch-utils.c: Ditto.
8952 * a29k-tdep.c: Ditto.
8953 * gdb_assert.h: Ditto.
8954 * gdbarch.sh: Ditto.
8955 * gdbarch.h, gdbarch.c: Re-generate.
8960 * event-top.h [!STOP_SIGNAL]: #include <signal.h>.
8964 * remote-sim.c (dump_mem): Cleanup printf format argument.
8965 * MAINTAINERS: Update, mn10300-elf now builds.
8969 * event-top.c: Remove duplicate #include <signal.h>.
8973 * sol-thread.c (restore_inferior_pid): Save the PID in a freshly
8975 (save_inferior_pid): Restore the PID from that tempoary
8976 buffer. Delete the buffer.
8977 * utils.c (make_cleanup_close, do_close_cleanup): Ditto for FD.
8981 * MAINTAINERS: Add ``The Obvious Fix Rule''.
8985 * MAINTAINERS: Add Michael Snyder to Solaris/SPARC list.
8989 * gdbarch.sh: Include "gdb_assert.h".
8990 (struct gdbarch): Change ``nr_data'' to unsigned.
8991 (alloc_gdbarch_data, free_gdbarch_data): New functions.
8992 (gdbarch_free): Free the data-pointer vector. Use xfree to delete
8993 architecture vector.
8994 (struct gdbarch_data, struct gdbarch_data_registration): Move init
8995 method to gdbarch_data. Add free method, make index unsigned.
8996 (struct gdbarch_data_registry): Make nr unsigned.
8997 (register_gdbarch_data): Add free parameter. Store in
8999 (init_gdbarch_data): Use set_gdbarch_data.
9000 (set_gdbarch_data): New function.
9002 * gdbarch.h, gdbarch.c: Re-generate.
9006 * ser-unix.c (hardware_print_tty_state) [HAVE_SGTTY]: Call
9007 fprintf_filtered with correct arguments.
9012 * findvar.c: Buffers of size MAX_REGISTER_RAW_SIZE or REGISTER_BYTES
9013 must be allocated dynamically, since these are no longer constants.
9015 * regcache.c: Ditto.
9017 * sol-thread.c: Ditto.
9019 * config/sparc/sun4sol2.mh (MH_CFLAGS): Add -I/usr/include/v9, as a
9020 work-around for a missing Sun header file in solaris for sparc64.
9024 * config/arm/linux.mh (NATDEPFILES): Add proc-service.o,
9025 thread-db.o, lin-lwp.o; remove lin-thread.o, linux-thread.o.
9026 * config/arm/nm-linux.h (PREPARE_TO_PROCEED, ATTACH_LWP,
9027 GET_THREAD_SIGNALS): Define.
9028 * arm-linux-nat.c (fill_gregset): Correct type of argument.
9029 (supply_gregset): Likewise.
9030 (fill_fpregset): Likewise.
9031 (supply_fpregset): Likewise.
9035 * valops.c (value_cast): If casting a scalar to a pointer, do not
9036 issue a message about truncation unless it exceeds the length of
9037 an address, not the length of a pointer. This is because what the
9038 user gives us is an address, not a pointer, and we will ultimately
9039 convert it (via ADDRESS_TO_POINTER) to a pointer, not truncate it
9040 to a pointer. This allows things like "print *(int *)0x01000234"
9041 to work without generating a misleading message on a target having
9042 two byte pointers and four byte addresses.
9046 * win32-nat.c: Change PTR to void * throughout.
9050 * signals.h: Removed.
9051 * event-top.c (#include <signal.h>): Changed from signals.h.
9052 * inflow.c: Likewise.
9053 * mac-xdep.c: Likewise.
9054 * ser-pipe.c: Likewise.
9055 * ser-tcp.c: Likewise.
9056 * standalone.c: Likewise.
9058 * utils.c: Likewise.
9059 * Makefile.in: Removed signals.h from dependencies.
9064 * inferior.h (step_over_calls_kind): Remove trailing comma from
9066 (step_over_calls): Declare as extern rather than global.
9070 * sh-tdep.c: Update copyright.
9071 (sh_extract_return_value): Rewrite.
9072 (sh3e_sh4_extract_return_value): New function.
9073 (sh_gdbarch_init): Initialize gdbarch_extract-return_value to new
9074 version of the function for sh3e and sh4 CPUs.
9078 * hppah-nat.c (child_xfer_memory): Add parameter 'struct mem_attrib *'
9079 to conform with interface change.
9083 * config/djgpp/fnchange.lst: Tweak to make consistent with the
9086 * config/djgpp/djconfig.sh: Use explicit absolute file name when
9089 * ser-go32.c (dos_write) [UART_FIFO_WORKS]: Use outportsb only if
9090 UART_FIFO_WORKS is defined. Otherwise use outportb.
9093 * go32-nat.c (go32_xfer_memory): Make the argument list consistent
9094 with target.h's `to_xfer_memory' member.
9098 * ppc-bdm.c (#include <signal.h>): Removed.
9099 * remote-array.c: Likewise.
9100 * remote-bug.c: Likewise.
9101 * remote-e7000.c: Likewise.
9102 * remote-mips.c: Likewise.
9103 * remote-os9k.c: Likewise.
9104 * remote-st.c: Likewise.
9105 * remote-udi.c: Likewise.
9106 * remote-vx29k.c: Likewise.
9107 * remote-vx68.c: Likewise.
9108 * remote-vx960.c: Likewise.
9109 * remote-vxmips.c: Likewise.
9110 * remote-vxsparc.c: Likewise.
9114 * remote-utils.h (sr_set_device): Changed free() to xfree() where
9115 appropriate. Also changed Copyright to include 2001.
9116 * symtab.h (obstack_chunk_free, SYMBOL_INIT_DEMANGLED_NAME): Likewise.
9117 * value.h (value_free): Likewise.
9118 * gdbarch.sh (gdbarch_free): Likewise.
9119 * gdbarch.c, gdbarch.h: Regenerated.
9123 * cli/cli-cmds.c (apropos_command): Changed occurance of free() to
9124 xfree(). Also changed Copyright to include 2001.
9128 * monitor.c (#include "gdb_wait.h"): Removed.
9130 * ppc-bdm.c: Likewise.
9131 * remote-adapt.c: Likewise.
9132 * remote-array.c: Likewise.
9133 * remote-bug.c: Likewise.
9134 * remote-e7000.c: Likewise.
9135 * remote-eb.c: Likewise.
9136 * remote-es.c: Likewise.
9137 * remote-mips.c: Likewise.
9138 * remote-mm.c: Likewise.
9139 * remote-nindy.c: Likewise.
9140 * remote-os9k.c: Likewise.
9141 * remote-rdi.c: Likewise.
9142 * remote-rdp.c: Likewise.
9143 * remote-sds.c: Likewise.
9144 * remote-sim.c: Likewise.
9145 * remote-st.c: Likewise.
9146 * remote-udi.c: Likewise.
9147 * remote-vx.c: Likewise.
9148 * remote-vx29k.c: Likewise.
9149 * remote-vx68.c: Likewise.
9150 * remote-vx960.c: Likewise.
9151 * remote-vxmips.c: Likewise.
9152 * remote-vxsparc.c: Likewise.
9153 * remote.c: Likewise.
9154 * ser-pipe.c: Likewise.
9155 * ser-unix.c: Likewise.
9156 * Makefile.in: Updated dependencies.
9160 * event-loop.c: Change inclusion of string.h to gdb_string.h and
9161 updated the copyright notice.
9162 * ser-pipe.c: Ditto.
9163 * mi/mi-cmds.c: Ditto.
9164 * mi/mi-console.c: Ditto.
9165 * mi/mi-getopt.c: Ditto.
9166 * mi/mi-parse.c: Ditto.
9170 * MAINTAINERS: Add David Smith to Write After Approval list.
9174 * cli/cli-utils.c (putchar_filtered): Move function from here.
9175 * utils.c (putchar_filtered): To here.
9176 * cli/cli-utils.h (putchar_filtered): Move declaration from here.
9177 * defs.h (putchar_filtered): To here.
9181 * configure.in (AC_CHECK_FUNCS): Replace vfork test with
9182 AC_FUNC_VFORK macro.
9183 * config.in, configure: Re-generate.
9185 * gdb_vfork.h: New file.
9186 * ser-pipe.c (pipe_open): Update. Include "gdb_vfork.h".
9187 * fork-child.c (fork_inferior): Ditto.
9191 * defs.h (strsave): Delete declaration.
9192 * utils.c (strsave): Delete definition.
9193 * TODO (strsave): Update
9195 * mac-xdep.c (tilde_expand): Replace strsave with xstrdup.
9196 * sparcl-tdep.c (sparclite_open): Ditto.
9197 * mips-tdep.c (mips_set_processor_type_command): Ditto.
9198 (_initialize_mips_tdep): Ditto.
9199 * solib.c (solib_open): Ditto.
9200 * symfile.c (add_filename_language): Ditto.
9201 (set_ext_lang_command): Ditto.
9202 * source.c (init_source_path): Ditto.
9204 * sh3-rom.c (sh3_open): Ditto.
9206 * serial.c (serial_open): Ditto.
9207 * remote-mips.c (common_open): Ditto.
9208 * monitor.c (monitor_open): Ditto.
9209 * m32r-rom.c (m32r_upload_command): Ditto.
9210 * infcmd.c (path_command): Ditto.
9211 * f-exp.y (parse_number): Ditto.
9212 * breakpoint.c (create_longjmp_breakpoint): Ditto.
9213 (create_thread_event_breakpoint): Ditto.
9214 * arc-tdep.c (arc_set_cpu_type_command): Ditto.
9215 (_initialize_arc_tdep): Ditto.
9217 Tue Jan 30 15:14:26 2001 Andrew Cagney <cagney@skil>
9219 * cli/cli-script.c (define_command): Check for a bad hook value in
9224 * configure/sh/embed.mt: New file.
9225 * configure/sh/linux.mt: New file.
9226 * configure/sh/sh.mt: Removed.
9227 * configure.tgt (sh-*-hms,sh-*-coff*,sh-*-elf*,sh-*-linux): New targets.
9232 * symtab.c (lookup_block_symbol): Use 'namespace' parameter in
9233 symbol comparisons in binary search.
9237 * win32-nat.c (child_xfer_memory): Add missing argument required by
9242 * ui-out.c (do_list_end): New function.
9243 (make_cleanup_ui_out_list_end): New function.
9244 * ui-out.h: Provide prototype for make_cleanup_ui_out_list_end.
9245 * stack.c (print_frame) [UI_OUT]: Call
9246 make_cleanup_ui_out_list_end to make sure we mark the end of the
9247 list if we do a non-local exit. At the end of the function,
9248 instead of calling ui_out_list_end directly, let do_cleanups
9253 Fix double parsing of filenames passed as command line arguments
9254 to GDB (causes weird handling of escape characters).
9255 Also, remove dependencies on the CLI from libgdb.
9256 * call-cmds.h: Remove declaration of exec_file_command().
9257 * gdbcore.h: Remove declaration of exec_file_command().
9258 Add declarations for exec_open() and exec_file_clear().
9259 * symfile.h: Add declarations for symbol_file_add_main() and
9260 symbol_file_clear().
9261 * exec.c (exec_open): New function. Implements to_open for exec
9263 (exec_file_clear): New function. Makes GDB forget about a previously
9264 specified executable file.
9265 (exec_file_attach): Move parsing of arguments from here ...
9266 (exec_file_command): ... to here.
9267 (init_exec_ops): Use exec_open(), not exec_file_command() to
9268 implement to_open for exec targets.
9269 * symfile.c (symbol_file_add_main): New function. Call symbol_file_add()
9270 with default values. Used when the file name has already been parsed.
9271 (symbol_file_clear): New function. Makes GDB forget about previously
9273 (symbol_file_command): Call the above function instead of inline code.
9274 * main.c: Include "symfile.h" and "gdbcore.h" instead of the deprecated
9276 (captured_main): Call exec_file_attach() and symbol_file_add_main()
9277 instead of exec_file_command() and symbol_file_command().
9278 (captured_main): Add comment.
9279 * corefile.c: Include "symfile.h".
9280 (core_file_command): Call symbol_file_add_main() instead of
9281 symbol_file_command().
9282 (reopen_exec_file): Call exec_open() instead of exec_file_command().
9283 * infcmd.c: Include "symfile.h".
9284 (attach_command): Call symbol_file_add_main() instead of
9285 symbol_file_command().
9286 * infrun.c: Remove comment about the inclusion of "symfile.h",
9287 not any longer appropriate.
9288 (follow_exec): Call symbol_file_add_main() instead of
9289 symbol_file_command().
9290 * remote-es.c: Include "symfile.h".
9291 (es1800_load): Call symbol_file_add_main() instead of
9292 symbol_file_command().
9293 * remote-vx.c: Remove comment about the inclusion of "symfile.h",
9294 not any longer appropriate.
9295 (vx-wait): Call symbol_file_add_main() instead of
9296 symbol_file_command().
9297 * solib-svr4.c (open_symbol_file_object): Call symbol_file_add_main()
9298 instead of symbol_file_command().
9299 * v850ice.c (ice_file): Call exec_open(), exec_file_attach() and
9300 symbol_file_add_main() instead of exec_file_command() and
9301 symbol_file_command().
9302 * Makefile.in: Update dependencies.
9306 * remote-udi.c (udi_open): Change strdup to xstrdup.
9307 * thread.c (thread_apply_all_command): Change strdup to xstrdup.
9308 Update copyright message.
9309 * varobj.c (delete_variable_1): Likewise.
9311 * gdb_string.h: Remove declaration of strdup. Update copyright
9313 * config/xm-mpw.h: Likewise.
9314 * config/i386/xm-i386mach.h: Likewise.
9315 * config/m68k/xm-apollo68b.h: Likewise.
9316 * config/m68k/xm-hp300bsd.h: Likewise.
9317 * config/rs6000/xm-rs6000.h: Likewise.
9318 * config/vax/xm-vaxult.h: Remove declaration of strdup.
9319 * config/vax/xm-vaxult2.h: Likewise.
9323 * MAINTAINERS: Add Jeff Holcomb to Write After Approval list.
9327 * target.c (target_xfer_memory_partial): Return -1 on failure due
9328 to invalid access mode attribute.
9332 * win32-nat.c (_initialize_core_win32): Prototype correctly.
9336 * config/alpha/tm-fbsd.h: Update copyright.
9337 (USE_STRUCT_CONVENTION): Define in terms of
9338 alphabsd_use_struct_convention.
9339 * config/alpha/fbsd.mt (TDEPFILES): Add alphafbsd-tdep.c.
9340 * alphafbsd-tdep.c: New file.
9344 * top.c (print_gdb_version): Update Copyright year.
9348 * dcache.c (dcache_write_line): Fix typo.
9350 * memattr.c (delete_mem_region): Replace free() with xfree().
9351 (mem_number): Add explicit type.
9353 * sol-thread.c (sol_thread_xfer_memory): Add attrib argument.
9354 (rw_common): Likewise.
9358 * infcmd.c (get_inferior_args, set_inferior_args): Accessor functions
9359 for the inferior program arguments.
9360 (run_command, run_no_args_command, init_infcmd)): Use accessor
9361 functions to set the inferior program arguments.
9362 * inferior.h: Add definitions to the accessor functions above.
9366 * dwarf2read.c (read_tag_const_type, read_tag_volatile_type):
9367 Implement these correctly, using make_cv_type.
9371 * exec.c (xfer_memory): Add attrib argument.
9372 * infptrace.c (child_xfer_memory): Likewise.
9373 * lin-lwp.c (lin_lwp_xfer_memory): Likewise.
9374 * monitor.c (monitor_xfer_memory): Likewise.
9375 * remote-adapt.c (adapt_xfer_inferior_memory): Likewise.
9376 * remote-array.c (array_xfer_memory): Likewise.
9377 * remote-bug.c (bug_xfer_memory): Likewise.
9378 * remote-e7000.c (e7000_xfer_inferior_memory): Likewise.
9379 * remote-eb.c (eb_xfer_inferior_memory): Likewise.
9380 * remote-es.c (es1800_xfer_inferior_memory): Likewise.
9381 * remote-mips.c (mips_xfer_memory): Likewise.
9382 * remote-mm.c (mm_xfer_inferior_memory): Likewise.
9383 * remote-nindy.c (nindy_xfer_inferior_memory): Likewise.
9384 * remote-os9k.c (rombug_xfer_inferior_memory): Likewise.
9385 * remote-rdi.c (arm_rdi_xfer_memory): Likewise.
9386 * remote-rdp.c (remote_rdp_xfer_inferior_memory): Likewise.
9387 * remote-sds.c (sds_xfer_memory): Likewise.
9388 * remote-sim.c (gdbsim_xfer_inferior_memory): Likewise.
9389 * remote-st.c (st2000_xfer_inferior_memory): Likewise.
9390 * remote-udi.c (udi_xfer_inferior_memory): Likewise.
9391 * remote-vx.c (vx_xfer_memory): Likewise.
9392 * remote.c (remote_xfer_memory): Likewise.
9393 * target.c (debug_to_xfer_memory, do_xfer_memory): Likewise.
9394 * target.h (child_xfer_memory, do_xfer_memory, xfer_memory): Likewise.
9395 * thread-db.c (thread_db_xfer_memory): Likewise.
9397 * target.h (#include "memattr.h"): Added.
9398 (target_ops.to_xfer_memory): Add attrib argument.
9400 * wince.c (_initialize_inftarg): Removed call to set_dcache_state.
9401 * dcache.h (set_dcache_state): Removed declaration.
9402 * dcache.c (set_dcache_state): Removed definition
9404 * dcache.c: Update module comment, as dcache is now enabled and
9405 disabled with memory region attributes instead of by the global
9406 variable "remotecache". Add comment describing the interaction
9407 between dcache and memory region attributes.
9408 (dcache_xfer_memory): Add comment describing benefits of moving
9409 cache writeback to a higher level.
9410 (dcache_struct): Removed cache_has_stuff field. This was used to
9411 record whether the cache had been accessed in order to invalidate
9412 it when it was disabled. However, this is not needed because the
9413 cache is write through and the code that enables, disables, and
9414 deletes memory regions invalidate the cache. Add comment which
9415 suggests that we could be more selective and only invalidate those
9416 cache lines containing data from those memory regions.
9417 (dcache_invalidate): Updated.
9418 (dcache_xfer_memory): Updated.
9420 (dcache_alloc): Don't abort() if dcache_enabled_p is clear.
9421 (dcache_xfer_memory): Removed code that called do_xfer_memory() to
9422 perform a uncached transfer if dcache_enabled_p was clear. This
9423 function is now only called if caching is enabled for the memory
9425 (dcache_info): Always print cache info.
9427 * target.c (do_xfer_memory): Add attrib argument.
9428 (target_xfer_memory, target_xfer_memory_partial): Break transfer
9429 into chunks defined by memory regions, pass region attributes to
9431 * dcache.c (dcache_read_line, dcache_write_line): Likewise.
9433 * Makefile.in (SFILES): Add memattr.c.
9434 (COMMON_OBS): Add memattr.o.
9435 (dcache.o): Add target.h to dependencies.
9436 * memattr.c: New file.
9437 * memattr.h: Likewise.
9439 * config/m32r/m32r.mt (GDBSERVER_LIBS): Added ../../intl/libintl.a.
9440 * config/mips/vr5000.mt (GDBSERVER_LIBS): Likewise.
9441 * config/tic80/tic80.mt (GDBSERVER_LIBS): Likewise.
9442 * gdbserver/low-sim.c (#include "defs.h"): Removed.
9443 (mygeneric_load): Rename from generic_load.
9445 * gdbserver/low-hppabsd.c (#include "server.h"): Added.
9446 (#include "defs.h"): Removed.
9447 (inferior_pid, perror_with_name): Remove declarations.
9448 * gdbserver/low-linux.c: Likewise.
9449 * gdbserver/low-nbsd.c: Likewise.
9450 * gdbserver/low-sparc.c: Likewise.
9451 * gdbserver/low-sun3.c: Likewise.
9453 * i386-stub.c: Re-indent.
9454 * m68k-stub.c: Re-indent.
9458 * gdbarch.sh (PARM_BOUNDARY): Define.
9459 * gdbarch.c: Regenerate.
9460 * gdbarch.h: Regenerate.
9464 * ns32k-tdep.c: #include "frame.h"
9465 * config/ns32k/tm-umax.h (FRAME_FIND_SAVED_REGS): Restore. It
9466 appears to have been inadvertantly removed sometime in May 1999.
9468 * Revert 2000-11-09 changes where shared library objects were
9469 moved from NATDEPFILES to TDEPFILES on NetBSD targets. While
9470 we'd like to be able to debug dynamically linked executables,
9471 this makes it impossible to build a cross debugger on a many
9474 * config/i386/nbsd.mt: Remove solib.o, solib-svr4.o from TDEPFILES.
9475 * config/i386/nbsdelf.mt: Likewise.
9476 * config/m68k/nbsd.mt: Likewise.
9477 * config/ns32k/nbsd.mt: Likewise.
9478 * config/powerpc/nbsd.mt: Likewise.
9479 * config/sparc/nbsd.mt: Likewise.
9480 * config/sparc/nbsdelf.mt: Likewise.
9481 * config/i386/nbsd.mh: Add solib.o, solib-svr4.o to NATDEPFILES.
9482 * config/i386/nbsdelf.mh: Likewise.
9483 * config/m68k/nbsd.mh: Likewise.
9484 * config/ns32k/nbsd.mh: Likewise.
9485 * config/powerpc/nbsd.mh: Likewise.
9486 * config/sparc/nbsd.mh: Likewise.
9490 * dbxread.c (read_ofile_symtab): Stay with AUTO_DEMANGLING for G++.
9491 (process_one_symbol): Likewise.
9492 * dwarfread.c (handle_producer): Likewise.
9496 * configure.in (build_warnings): Disable -Wuninitialized until GDB
9497 compiles with -Wuninitialized,-Werror.
9498 * configure: Regenerate.
9500 * MAINTAINERS: Add list of buildable targets.
9504 * defs.h (STRCMP): Delete macro.
9506 * objfiles.c (objfile_relocate): Replace STRCMP with call to
9508 * symtab.c (lookup_partial_symbol, lookup_block_symbol): Ditto.
9509 * symfile.c (compare_symbols): Ditto.
9510 * standalone.c (open): Ditto.
9511 * remote-es.c (verify_break): Ditto.
9512 * cli/cli-decode.c (add_cmd, add_show_from_set): Ditto.
9514 * symfile.c (compare_psymbols): Delete comment refering to STRCMP.
9518 * varobj.c (FREEIF): Delete macro.
9519 (varobj_set_value, free_variable): Replace FREEIF with ``xfree''
9524 * arc-tdep.c (arc_cpu_type_table): Add new arc core numbers.
9525 (arc_print_insn): No bfd available, so pass NULL to
9526 arc_get_disassembler.
9530 * symtab.c (lookup_symbol_aux): Call lookup_symbol_aux to lookup
9531 a mangled symbol rather than recursing into lookup_symbol, since
9532 this will just re-unmangle the name & call lookup_symbol_aux -
9533 leading to an infinite recursion.
9537 * infcmd.c (print_return_value): Restore another space lost by
9538 switch to UIOUT. ``$NN='' should be ``$NN =''.
9542 * target.h (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT)
9543 * breakpoint.c (TARGET_REGION_OK_FOR_HW_WATCHPOINT): Wrap macro
9544 definition in parenthesis.
9549 * remote.c (remote_remove_hw_breakpoint): Add 'len' field to Z
9551 (remote_insert_hw_breakpoint): Ditto.
9555 * config/m68k/tm-nbsd.h (USE_STRUCT_CONVENTION): Define.
9556 (BPT_VECTOR, REMOTE_BPT_VECTOR): Change to 0xf.
9557 * config/m68k/nbsd.mt (TDEPFILES): Add m68knbsd-tdep.o.
9558 * m68knbsd-tdep.c: New file.
9560 * i386nbsd-tdep.c: Remove #if 0'd out #includes.
9562 * m68knbsd-nat.c: #include gdbcore.h.
9566 * MAINTAINERS: Add J.T. Conklin to Blanket Write Privs.
9570 * procfs.c (procfs_stopped_by_watchpoint): Don't die if process
9571 goes away -- just return false (ie. not stopped by watchpoint).
9572 * source.c (openp): Fix typo in comment.
9576 * blockframe.c (generic_get_saved_register): Spelling fix.
9577 * frame.h (FRAME_FP): Spelling fix.
9581 * infcmd.c (print_return_value): Restore space lost by switch to
9582 UIOUT. ``$NN='' should be ``$NN =''.
9586 * regcache.c (set_register_cached, register_buffer,
9587 real_register, pseudo_register fetch_register, store_register):
9589 (register_changed, read_relative_register_raw_bytes_for_frame,
9590 registers_changed, registers_fetched, read_register_bytes,
9591 read_register_gen, write_register_gen, read_register,
9592 read_signed_register, write_register, supply_register): Replace
9593 register_valid[] with register_cached() and
9594 set_register_cached().
9595 (read_register_bytes, read_register_gen, write_register_gen,
9596 read_register, read_signed_register, write_register,
9597 supply_register): Replace registers[] with register_buffer().
9598 (read_register_bytes, read_register_gen, read_register,
9599 read_signed_register): Call fetch_register().
9600 (write_register_gen, write_register): Call real_register() and
9602 (write_register_bytes): Call store_register().
9603 * value.h (set_register_cached, register_buffer): Prototype.
9604 * remote.c (remote_fetch_registers): Allocate regs[] with a
9605 run-time size. Replace register_valid[] with
9606 set_register_cached().
9607 (store_register_using_P, remote_store_registers): Replace
9608 registers[] with register_buffer().
9612 * regcache.c: Change "write-back" comment to "write-through".
9613 Change "regno" to "regnum".
9614 (read_register, read_signed_register): Remove "raw" from return
9616 (supply_register): Spelling fix.
9617 * value.h: Change "regno" to "regnum".
9621 * Makefile.in (install-gdbtk): Add .itcl files to the list of files
9626 * mips-tdep.c (mips_coerce_float_to_double): Fix typo in comment.
9630 * valops.c (VALUE_SUBSTRING_START): Delete.
9634 * Makefile.in (SUBDIR_CLI_OBS): Add cli/cli-utils.o.
9635 (SUBDIR_CLI_SRCS): Add cli/cli-utils.c.
9636 (cli_utils_h): New variable.
9637 (cli/cli-utils.o): New rule.
9638 * cli/cli-utils.c: New file.
9639 * cli/cli-utils.h: New file.
9643 * config/i386/tm-i386.h (REGISTER_CONVERT_TO_VIRTUAL,
9644 REGISTER_CONVERT_TO_RAW): Delete trailing semicolon.
9648 * alphabsd-nat.c, i386-linux-nat.c, i386bsd-nat.c: Fix typo in
9653 * sh-tdep.c (sh_default_store_return_value): Allow for small return type.
9654 (sh3e_sh4_store_return_value): Call sh_default_store_return_value for
9656 * sparc-tdep.c (sparc_frame_chain): Fix typo in comment.
9657 Update copyright notice.
9659 For older changes see ChangeLog-2000
9665 version-control: never
projects / binutils.git / blob