* gdb.fortran/types.exp: Escape brackets in expect patterns

[binutils.git] / gdb / ChangeLog-97

Wed Dec 31 11:43:53 1997  Mark Alexander  <[email protected]>

        * dsrec.c (load_srec): Check remotedebug flag when printing
        debug info.

Wed Dec 31 10:33:15 1997  David Taylor  <[email protected]>

        * breakpoint.c (breakpoint_re_set): add _siglongjmp to list of
        longjmp breakpoints.

Mon Dec 29 21:25:34 1997  Mark Alexander  <[email protected]>

        * dve3900-rom.c: New file to support Densan DVE-R3900/20 board.
        * monitor.c (monitor_debug): Move to utils.c, rename to puts_debug.
        (monitor_write_memory, monitor_read_memory, monitor_insert_breakpoint,
        monitor_remove_breakpoint): Remove useless address bits if current
        monitor has MO_ADDR_BITS_REMOVE flag.
        * monitor.h (MO_ADDR_BITS_REMOVE): Define.
        * utils.c (puts_debug): Formerly monitor_debug from monitor.c;
        move here and make public.  Add better support for carriage returns.
        * defs.h (puts_debug): Declare.
        * dsrec.c (load_srec): Use puts_debug to print remotedebug information.
        Output header record correctly.
        (make_srec): Output a header record instead of a termination record
        if sect is non-NULL (value is ignored), but abfd is NULL.
        * config/mips/tm-tx39.h (DEFAULT_MIPS_TYPE): Remove definition.
        (REGISTER_NAMES): Define to add R3900-specific registers.
        * config/mips/tm-tx39l.h: Ditto.
        * config/mips/tx39.mt (TDEPFILES): Add dve3900-rom.o and support files.
        * config/mips/tx39l.mt: Ditto.

Wed Dec 24 12:48:48 1997  Stan Shebs  <[email protected]>

        * dsrec.c: Cosmetic improvements.
        (make-srec): Change indexing of format and code tables to
        remove confusing empty entries.

Mon Dec 22 21:51:53 1997  Mark Alexander  <[email protected]>

        * remote-mips.c (_initialize_remote_mips): Fix DDB doc string.

start-sanitize-d30v
Sun Dec 21 17:00:06 1997  David Taylor  <[email protected]>

        * d30v-tdep.c (d30v_frame_find_saved_regs): split most of
        function off into d30v_frame_find_saved_regs_offsets;
        (d30v_frame_find_saved_regs_offsets): new function.  Got
        backtrace working when calling from framefull (unoptimized)
        routines (.e.g, main) into frameless (optimized) routines
        (e.g., printf).

Fri Dec 19 09:49:49 1997  David Taylor  <[email protected]>

        * d30v-tdep.c (d30v_frame_chain): test end_of_stack
        (d30v_frame_find_saved_regs): set it.
        * config/d30v/tm-d30v.h: improved FRAME_CHAIN_VALID

end-sanitize-d30v
Thu Dec 18 12:34:28 1997  Andrew Cagney  <[email protected]>

        From Gavin Koch <[email protected]>: mips-tdep.c
        * (mips_push_arguments): For big-endian shorts and char's store at
        * the correct location.

Thu Dec 18 00:26:46 1997  Andrew Cagney  <[email protected]>

        * mdebugread.c (parse_partial_symbols): Delete check that symbols
        for file not already loaded.  Did not work when an include file
        was involved.

Wed Dec 17 10:43:04 1997  Andrew Cagney  <[email protected]>

        * elfread.c (elf_symfile_read): Since the partial symbol table is
        searched last in first, insert mdebug or XCOFF info into the
        partial symbol table before any DWARF2 info.

Thu Dec 18 00:00:48 1997  Andrew Cagney  <[email protected]>

        * symfile.c (init_psymbol_list): Handle init with zero elements.

        * elfread.c (elf_symfile_read): If `mainline', clear psymbol table
        using init_psymbol_list 0.  For build_psymtabs functions, pass
        mainline==0 so that psymbol_list isn't re-initialized.

        * symfile.c (discard_psymtab): New function, correctly unlink an
        empty psymtab from an object file.
        * dbxread.c (end_psymtab): Call discard_psymtab.
        * xcoffread.c (xcoff_end_psymtab): Ditto.
        * hpread.c (hpread_end_psymtab):  Ditto.
        * os9kread.c (os9k_end_psymtab):  Ditto.

Wed Dec 17 10:47:05 1997  Michael Snyder  ([email protected])

        * tracepoint.c (set_raw_tracepoint): initialize addr_string
        to NULL; (trace_actions_command): call readline_begin_hook only
        if from_tty is true.

Tue Dec 16 20:05:48 1997  Mark Alexander  <[email protected]>

        * configure.tgt: Change little-endian tx39 target name to tx39l.
start-sanitize-tx19
        * configure.tgt: Change little-endian tx19 target name to tx19l.
end-sanitize-tx19

Tue Dec 16 11:24:30 1997  Jeffrey A Law  ([email protected])

        * remote-sim.c (gdbsim_open): Use "--architecture" instead of
        ambigious short form.
        
start-sanitize-d30v
Tue Dec 16 10:29:16 1997  David Taylor  <[email protected]>

        * d30v-tdep.c (d30v_frame_chain): don't or in DMEM_START to
        FP_REGNUM value before return; (prologue_find_regs): two sets
        of offsets -- frame pointer and stack pointer, not just one that
        tries to do double duty; (d30v_frame_find_saved_regs): stop once
        we hit pc (in case we're stopped in the middle of the prologue)
        and improve handling of frameless prologues; (d30v_push_arguments):
        *ALL* arguments go on the stack until we run out of args registers,
        force sp to be 8 byte aligned.

        * config/tm-d30v.h (EXTRACT_STRUCT_VALUE_ADDRESS): fix, it's r2,
        not r0; (FRAME_CHAIN_VALID): handle use of external memory;
        (STACK_ALIGN): define.
end-sanitize-d30v

Mon Dec 15 15:13:57 1997  Andrew Cagney  <[email protected]>

        * remote-sim.c (gdbsim_wait): When HAVE_SIGACTION and SA_RESTART
        intall cntrl-c handler with SA_RESTART clear.  On BSD systems this
        stops read syscalls's being restarted.

        * configure.in (configdirs): Check for sigaction.
        * configure: Re-generate.

start-sanitize-tx49
        From Gavin Koch <[email protected]>:
        * config/mips/tx49el.mt : New file.
        * config/mips/tm-tx49.h : New file.
        * config/mips/tm-tx49el.h : New file.
        * configure.tgt: Changed to use the new files for 
        mips64*tx49*-*-elf* and mips64*tx49*el-*-elf*

end-sanitize-tx49
Mon Dec 15 11:38:52 1997  Andrew Cagney  <[email protected]>

        * dwarf2read.c: From change proposed by Gavin Koch.
        (address_significant_size): New static variable.
        (dwarf2_build_psymtabs_hard): Check consistency between
        `address_size' and `address_significant_size'.
        (read_address): MASK out all but the significant bits, as
        determined by `address_significant_size', of any addresses.
        (elf-bfd.h): Include.
        (dwarf2_build_psymtabs_hard): Set `address_significant_size'
        according to the arch_size of the elf object file.

Thu Dec 11 13:40:46 1997  Andrew Cagney  <[email protected]>

        * dwarf2read.c (dwarf_decode_lines): Change type of address to
        CORE_ADDR.

start-sanitize-tic80
Thu Dec 11 22:39:02 1997  Mark Alexander  <[email protected]>

        From change made to branch by Bob Manson <[email protected]>:
        * tic80-tdep.c (tic80_push_arguments): The compiler always
        passes structs by reference.

end-sanitize-tic80
Thu Dec 11 14:28:01 1997  Michael Snyder  ([email protected])

        * tracepoint.c (trace_find_command): don't error if going
        backwards thru the trace buffer in a loop.
        * (struct tracepoint): delete unused field.

start-sanitize-d30v
Wed Dec 10 17:57:00 1997  David Taylor  <[email protected]>

        * d30v-tdep.c : don't bury lots of magic numbers in the code
        instead use defines for the opcodes and opcode masks; update
        to use actual d30v patterns; fix register sizes to be 4 bytes
        not 2 bytes; improve prologue testing now that we have a C
        compiler; fix stack frame handling enough to get backtraces
        working; initial changes to push and pop frames (so that gdb
        can call functions in the inferior).

        * config/d30v/tm-d30v.h: update DMEM_START, IMEM_START, and
        STACK_START; change FR_REGNUM to 61 (was 11).  Reformat comment
        about DUMMY FRAMES so that it is readable.  Fix SAVED_PC_AFTER_FRAME
        macro.
end-sanitize-d30v

Wed Dec 10 17:41:07 1997  Jim Blandy  <[email protected]>

        * ch-valprint.c (chill_val_print): To avoid segfaults, don't print
        a string whose dynamic length is longer than its static length.

Wed Dec 10 15:54:00 1997  Andrew Cagney  <[email protected]>

        * dwarf2read.c (dwarf2_build_psymtabs_hard): Check
        cu_header.length is within dwarf_info_buffer not
        dwarf_abbrev_buffer.
        
Mon Dec  8 14:28:49 1997  Michael Snyder  ([email protected])

        * tracepoint.c (memrange_sortmerge): allow for memranges 
        that overlap.  (collect_pseudocommand etc.) cleanup decls.

Fri Dec  5 09:22:35 1997  Nick Clifton  <[email protected]>

        * config/v850/tm-v850.h (BREAKPOINT): Reverted back to old value...

Thu Dec  4 09:30:22 1997  Nick Clifton  <[email protected]>

        * config/v850/tm-v850.h (BREAKPOINT): Changed to match new value.

Wed Dec  3 12:44:15 1997  Keith Seitz  <[email protected]>

        * tracepoint.c: Add declaration for x_command.

        * printcmd.c (x_command): Remove static declaration.

Wed Dec  3 12:00:42 1997  Michael Snyder  ([email protected])

        * tracepoint.c (finish_tfind_command): call do_display so that
        auto-displays are updated by tfind.  Also, keep track of frame
        and current-function so that tfind behaves like stepping (only
        show the stack frame if we step into a new function or return).

Wed Dec  3 14:14:58 1997  David Taylor  <[email protected]>

        * sol-thread.c: additional support for debugging threaded core
        files on solaris; previously only kernel threads were found --
        user threads generated errors.
        * corelow.c: don't register core_ops as a target if
        coreops_suppress_target is true (set by sol-thread.c).

Tue Dec  2 14:53:09 1997  Michael Snyder  ([email protected])

        * tracepoint.c: make "tdump" command handle literal memranges.

Tue Dec  2 11:34:48 1997  Michael Snyder  ([email protected])

        * tracepoint.c: use "lookup_cmd" to parse actions commands
        (thus allowing unambiguous prefixes and aliases).

Tue Dec  2 10:15:57 1997  Nick Clifton  <[email protected]>

        * configure.tgt: Add support for Thumb target.

Tue Dec  2 10:14:15 1997  Michael Snyder  ([email protected])

        * tracepoint.c: move prototype of validate_actionline(), and
        make it consistent with the function declaration.

Thu Nov 27 09:07:18 1997  Michael Meissner  <[email protected]>

        * Makefile.in (tracepoint_h): New macro for tracepoint.h
        includes.
        (tracepoint.o): Add rule to build.

Wed Nov 26 22:59:04 1997  Jeffrey A Law  ([email protected])

        * remote-sim.c (gdbsim_cntrl_c): Lose ANSI prototype.

        * tracepoint.c (set_raw_tracepoint): fix typo

Wed Nov 26 11:33:09 1997  Keith Seitz  <[email protected]>

        * tracepoint.c (set_raw_tracepoint): Make sure there's a trailing
        slash on the directory name.

        * top.c (get_prompt): New function.
        * top.h: Declare it.

Wed Nov 26 09:59:47 1997  Andrew Cagney  <[email protected]>

        * dwarf2read.c (struct comp_unit_head): Change length and
        abbrev_offset fields to unsigned int.
        (dwarf2_build_psymtabs_hard): Verify length and offset read from
        .debug_info section.

Mon Nov 24 19:36:34 1997  Michael Snyder  ([email protected])

        * tracepoint.c, tracepoint.h: new module, implements tracing,
        which is a new functionality somewhat like breakpoints except
        that a tracepoint stops the inferior only long enough to collect
        and cache selected buffers and memory locations, then allows 
        the inferior to continue; the cached trace data can then be 
        examined later.

Mon Nov 24 14:17:02 1997  Michael Snyder  ([email protected])

        * infcmd.c: export registers_info, for use by other modules.
        * printcmd.c: export output_command, for use by other modules.
        * stack.c: export locals_info and args_info, for use by other modules.
        * remote.c: export getpkt, putpkt, and fromhex for external use.
          Make fromhex case-insensative.  New function "remote_console_output"
          abstracts the acceptance of "O" packets from target.
          Make all "remotedebug" output go to stdout, not stderr.

Mon Nov 24 08:59:28 1997  Andrew Cagney  <[email protected]>

        * valprint.c (print_longest): When CC has long long but printf
        doesn't, print decimal value as three parts.

        * config/i386/tm-fbsd.h: New file.
        * config/i386/fbsd.mt (TM_FILE): Change to tm-fbsd.h.

        * config/i386/nm-fbsd.h (FLOAT_INFO): Move definition from here.
        * config/i386/tm-fbsd.h (FLOAT_INFO): To here.

        * configure.in (PRINTF_HAS_LONG_LONG): Check full functionality of
        %ll format specifier.
        (SCANF_HAS_LONG_DOUBLE): Check the scanf family for support of
        long double using %Lg.
        * acconfig.h: Provide default undef for SCANF_HAS_LONG_DOUBLE.
        * configure: Re-generate.
        
        * c-exp.y (parse_number): Use sscanf %Lg when host has
        SCANF_HAS_LONG_DOUBLE not PRINTF_HAS_LONG_DOUBLE

Sun Nov 23 17:12:58 1997  Andrew Cagney  <[email protected]>

        * printcmd.c (print_insn): Set the machine type if known.

        * i386-tdep.c (_initialize_i386_tdep): Delete "set
        assembly-language" command.  Replaced by generic "set
        architecture". Set initial machine using bfd_lookup_arch.

start-sanitize-vr5400
Sun Nov 23 16:23:37 1997  Andrew Cagney  <[email protected]>

        * configure.tgt (gdb_target): Treat vr5400 as a vr5000.

end-sanitize-vr5400
Fri Nov 21 19:43:23 1997  Jim Blandy  <[email protected]>

        * valops.c (call_function_by_hand): If the function has a
        prototype, convert its arguments as if by assignment.  Otherwise,
        do the usual promotions. 
        * stabsread.c (define_symbol): Set the TYPE_FLAG_PROTOTYPED flag
        on functions' types when we can; all C++ functions should get it,
        and if the Sun-style prototype notation is in the stabs, we can
        notice that.

Fri Nov 21 12:20:16 1997  Ian Lance Taylor  <[email protected]>

        * aclocal.m4 (AM_CYGWIN32, AM_EXEEXT): Remove.  They are already
        defined by the inclusion of ../bfd/aclocal.m4.
        * configure: Rebuild.

Fri Nov 21 10:52:39 1997  Michael Meissner  <[email protected]>

        * Makefile.in (SHELL): Really do the change.

Fri Nov 21 02:19:57 1997  Geoffrey Noer  <[email protected]>

        * Makefile.in: also revert SHELL change until configury
        changes work

Thu Nov 20 16:35:13 1997  Doug Evans  <[email protected]>

        * sparc-tdep.c (sparc_pc_adjust): Don't assume sizeof (long) == 4.

Thu Nov 20 04:11:27 1997  Geoffrey Noer  <[email protected]>

        * aclocal.m4: add EXEEXT setting rule
        * configure.in: call it
        * configure: regenerate
        * Makefile.in: pepper with EXEEXTs in appropriate places,
        set SHELL = @SHELL@ for those lame hosts that don't have a /bin/sh
        For some reason, EXEEXT isn't getting substututed in correctly
        so for now, set EXEEXT to empty string

Mon Nov 17 15:35:06 1997  Doug Evans  <[email protected]>

        * Makefile.in (remote-sim.o): Depend on $(INCLUDE_DIR)/callback.h.

start-sanitize-java     
Fri Nov 14 13:04:34 1997  Jeffrey A Law  ([email protected])

        * jv-exp.y (copy_exp, insert_exp): Avoid ANSI prototypes.

end-sanitize-java       
start-sanitize-d30v
Thu Nov 13 09:47:35 1997  Michael Meissner  <[email protected]>

        * d30v-tdep.c (d30v_print_flags): Function to print the d30v flags
        in a human readable format.
        (print_flags_command): Command wrapper to call d30v_print_flags.
        (d30v_do_registers_info): When printing out all of the registers,
        print out the flag values in a human readable fashion.
        (_initialize_d30v_tdep): Add info flags command to print the
        flags.

        * config/d30v/tm-d30v.h (PSW_*): Add macros for each of the PSW
        bits that are defined.
end-sanitize-d30v

Wed Nov 12 14:58:39 1997  Jeff Holcomb  <[email protected]>

        * symfile.c (generic_load): Handle cancel from the
        ui_load_progress_hook routine.
        * dsrec.c (load_srec): Handle cancel from the
        ui_load_progress_hook routine.

Mon Nov 10 15:13:13 1997  Ian Lance Taylor  <[email protected]>

        * valprint.c (print_longest): The b, h, w, and g format specifiers
        print unsigned values.

Mon Nov 10 02:02:49 1997  Martin M. Hunt  <[email protected]>

        * top.c (quit_confirm): Change exit message.

Tue Nov  4 16:52:50 1997  Geoffrey Noer  <[email protected]>

        * config/i386/cygwin32.mh: because cygwin.dll calls malloc/realloc
        to allocate memory for environ space, gdb cannot use memory
        checks -- set -DNO_MMCHECK

start-sanitize-java     
Tue Nov  4 13:50:59 1997  Jim Blandy  <[email protected]>

        * jv-exp.y (ArrayAccess): Implement Name [ Expression ]; check the
        code to see why this is not trivial.
        (copy_exp, insert_exp): New functions.
        
end-sanitize-java       
Fri Oct 24 17:24:00 1997  Dawn Perchik  <[email protected]>

        * dwarf2read.c (dwarf2_build_psymtabs_hard): Handle the case
        where a compilation unit die has no children (DW_TAG_compile_unit
        has DW_children_no).
        (scan_partial_symbols): Add comment for nesting_level.

start-sanitize-tx49
Wed Oct 29 17:45:43 1997  Gavin Koch  <[email protected]>

        * configure.tgt: Add tx49 configury based on 4300.

end-sanitize-tx49
Wed Oct 29 15:53:24 1997  David Taylor  <[email protected]>

        * solib.c (solib_break_names): add entry for Solaris 2.6 run
        time linker.  From Casper Dik via Peter Schauer.

Tue Oct 28 17:31:47 1997  Martin M. Hunt  <[email protected]>

        * configure.in (configdir): Add  -lcomdlg32 and -ladvapi32
        to WIN32LIBS.

        * configure: Rebuild

Fri Oct 24 16:48:21 1997  David Taylor  <[email protected]>

        * sol-thread.c (sol_find_new_threads_callback,
        sol_find_new_threads): New functions.
        * config/sparc/nm-sun4sol2.h (FIND_NEW_THREADS): New macro, invoke
        sol_find_new_threads.
        * thread.c (info_threads_command): invoke FIND_NEW_THREADS if it
        is defined.

Thu Oct 23 16:16:04 1997  Jeff Law  ([email protected])

        * dbxread.c (process_one_symbol): Put back initialization
        of a variable lost during last change.  Don't perform
        assignment inside conditionals.
        * stabsread.c (symbol_reference_defined): Return -1 for error/not
        found.  All callers changed appropriately.
        (define_symbol): Don't perform assignment inside conditionals.

Wed Oct 22 13:04:52 1997  Jeffrey A Law  ([email protected])

        * mdebugread.c (psymtab_to_symtab_1): Handle new live range stabs
        entries.

        * dbxread.c: More comment cleanups.
        * stabsread.c: Fix various violations of the GNU coding and
        formatting standards.  Update/add comments to make code clearer.
        (resolve_reference): Delete unused function.
        (ref_search_val): Remove function.  It didn't belong in stabsread.c
        (resolve_live_range): No longer returns a value.  Do not add it
        to the live range list until the entire range stab has been parsed.
        (get_substring): Remove duplicate declaration.
        (resolve_symbol_reference): Now static.  Remove unnecessary code
        to deal with cleanups.
        (ref_add): Use xrealloc instea of realloc.
        (process_reference): Reorganize slightly to make clearer.
        * stabsread.h (resolve_symbol_reference): Remove declaration.
        (resolve_reference): Likewise.
        * symtab.c (find_active_alias): New function.
        (lookup_block_symbol): Use find_active_alias.
        * symtab.h (struct range_list): Fix dangling struct live_range
        reference.
        (ref_search_val): Remove decl.

        * symtab.h (struct range_list): Renamed from struct live_range.
        (struct symbol): Remove struct live_range_info substruct.
        Bring the alias list and range list fields up to the toplevel
        as "aliases" and "ranges".
        (SYMBOL_ALIASES, SYMBOL_RANGES): Corresponding changes.
        (SYMBOL_RANGE_START, SYMBOL_RANGE_END, SYMBOL_RANGE_NEXT): Delete.
        * stabsread.c: Corresponding changes.

        * dbxread.c: Fix various violations of the GNU coding and
        formatting standards.  Update/add comments to make code
        clearer.
        (process_later): Use xrealloc instead of realloc.  

        * symtab.c: Include inferior.h.

Tue Oct 21 14:15:26 1997  Per Bothner  <[email protected]>

        * ch-exp.c:  Rename FIELD_NAME to DOT_FIELD_NAME (to avoid conflict).

Fri Oct 17 13:22:02 1997  Stan Shebs  <[email protected]>

        * infcmd.c: Improve grammar of "set args" help.

Thu Oct 16 15:03:58 1997  Michael Meissner  <[email protected]>

        * remote-sds.c (sds_load): Properly declare as static.

Wed Oct 15 10:27:14 1997  Doug Evans  <[email protected]>

        * config/sparc/tm-sparc.h (FIX_CALL_DUMMY): Mask off displacement
        to 30 bits in call insn to handle --enable-64-bit-bfd.
        (STORE_STRUCT_RETURN): Change to handle --enable-64-bit-bfd.

Tue Oct 14 22:13:27 1997  Dawn Perchik  <[email protected]>

        * stabsread.c: Make ref_map entries dynamically allocated.

Thu Oct  9 12:37:57 1997  Frank Ch. Eigler  <[email protected]>

        * printcmd.c (print_address_symbolic, address_info): Mask
        target-specific flag bits from PC, for more aesthetic disassembly.
        * config/mips/tm-mips.h: Added PC masking for MIPS family
        (especially the MIPS16).

Sat Oct  4 18:45:44 1997  Mark Alexander  <[email protected]>

        * remote-mips.c (mips-initialize): Work around flakiness in
        some versions of PMON after loading a program.

start-sanitize-java     
Fri Oct  3 15:49:18 1997  Per Bothner  <[email protected]>

        * c-lang.h, cp-valprint.c (static_field_print):  Make non-static.
        * parse.c, parser-defs.h (length_of_subexp):  Make non-static.
        * jv-exp.y (FieldAccess):  Handle dollar-VARIABLE as primary.
        (ArrayAccess):  Likewise.  Also remove warnings.
        (CastExpression):  Implement (typename) UnaryExpression.
        (push_qualified_expression_name):  Fix small bug.
        * jv-lang.c:  Use TYPE_TAG_NAME, not TYPE_NAME for class names.
        (_initialize_jave_language):  Fix typo (jave -> java).
        (java_language):  Java does *not* have C-style arrays.
        (java_class_from_object):  Make more general (and complicated).
        (java_link_class_type):  Fix typo "super" -> "class".  Handle arrays.
        (java_emit_char, java_printchar):  New function.
        (evaluate_subexp_java case BINOP_SUBSCRIPT):  Handle Java arrays.
        * jv-valprint.c (java_value_print):  Implement printing of Java arrays.
        (java_print_value_fields):  New function.
        (java_val_print):  Better printing of TYPE_CODE_CHAR, TYPE_CODE_STRUCT.

end-sanitize-java       
Fri Oct  3 09:52:26 1997  Mark Alexander  <[email protected]>

        * config/mips/tm-mips.h (MAKE_MSYMBOL_SPECIAL): Force MIPS16
        addresses to be odd.
        (MIPS_FPU_SINGLE_REGSIZE, MIPS_FPU_DOUBLE_REGSIZE): Define.
        * mips-tdep.c (mips_extract_return_value): Doubles aren't
        returned in FP0 if FP registers are single-precision only.
start-sanitize-r5900
        * config/mips/tm-r5900.h (MIPS_LAST_FP_ARG_REGNUM): Redefine
        to disable use of FP registers for function arguments.
end-sanitize-r5900

Mon Sep 29 23:03:03 1997  Mark Alexander  <[email protected]>

        * mips-tdep.c (set_reg_offset): New function.
        (mips16_heuristic_proc_desc): Calculate offsets of registers
        saved by entry pseudo-op after rest of prologue has been read.
        Use set_reg_offset to ignore all but the first save of a given
        register.
        (mips32_heuristic_proc_desc): Initialize frame adjustment value.
        * remote-sim.c (gdbsim_store_register): Don't update registers
        that have a null or empty name.
        * findvar.c (read_register_bytes): Don't fetch registers
        that have a null or empty name.

Tue Sep 30 13:35:54 1997  Andrew Cagney  <[email protected]>

start-sanitize-r5900
        * config/mips/tm-r5900.h (REGISTER_NAMES, NUM_REGS): Overridei
        instead of define.

        * config/mips/tm-r5900.h (REGISTER_NAMES): Define.
        (NUM_REGS): Ditto.

end-sanitize-r5900
        * config/mips/tm-mips.h (NUM_REGS): Define conditionally.
        (REGISTER_NAMES): Ditto.

Fri Sep 26 21:08:22 1997  Keith Seitz  <[email protected]>

        * dsrec.c (load_srec): add ui_load_progress_hook to 
        display some feedback to user

        * symfile.c (generic_load): add ui_load_progress_hook to
        display some feedback to user

Fri Sep 26 17:32:22 1997  Jason Molenda  ([email protected])

        * command.c (add_cmd, add_show_from_set): Insert new commands in
        alphabetical order.

Fri Sep 26 12:22:00 1997  Mark Alexander  <[email protected]>

        * config/mips-tm-mips.h (mips_extra_func_info): New frame_adjust
        member for storing offset of MIPS16 frame pointer from SP.
        * mips-tdep.c: Use RA_REGNUM instead of hardcoded 31 throughout.
        (PROC_FRAME_ADJUST): Define.
        (mips16_heuristic_proc_desc): Store frame pointer adjustment value.
        (get_frame_pointer): Use frame pointer adjustment value when
        calculating frame address.
        * remote-sim.c (gdbsim_fetch_register): Don't fetch registers
        that have a null or empty name.
start-sanitize-tx19
        * config/mips/tm-tx19.h (MIPS_DEFAULT_FPU_TYPE): Define.
        (REGISTER_NAMES): Redefine to eliminate FP registers.
        * config/mips/tm-tx19l.h: Ditto.
end-sanitize-tx19

Fri Sep 26 12:40:51 1997  Jeffrey A Law  ([email protected])

start-sanitize-r5900
        * configure.tgt: Set gdb_target to r5900.
        * config/mips/tm-r5900.h, config/mips/r5900.mt: New files
end-sanitize-r5900
        * mips-tdep.c (_initialize_mips_tdep): Allow target files to
        override default FPU type.

Fri Sep 26 10:33:54 1997  Felix Lee  <[email protected]>

        * configure.tgt (v850-*-*): necmsg.lib instead of v850.lib.

Wed Sep 24 14:02:09 1997  Andrew Cagney  <[email protected]>

        * config/v850/tm-v850.h (BREAKPOINT): Use 1 word DIVH insn with
        RRRRR=0 for simulator breakpoint. Previous breakpoint insn was two
        words.

Thu Sep 18 15:07:46 1997  Andrew Cagney  <[email protected]>

        * ser-e7kpc.c (get_ds_base): Only use under Windows.
        (windows.h): Include when any _WIN32 host.

Wed Sep 24 18:12:47 1997  Stu Grossman  <[email protected]>

        * The following block of changes add support for debugging assembly
        source files.
        * breakpoint.c (resolve_sal_pc):  Prevent crash when pc isn't
        associated with a function.
        * buildsym.c (record_line start_symtab end_symtab):  Don't delete
        symtabs which only have line numbers (but no other debug symbols).
        * dbxread.c (read_dbx_symtab end_psymtab):  Ditto.

        * remote-sim.c:  New functions gdbsim_insert/remove_breakpoint.  Use
        intrinsic simulator breakpoints if available, otherwise do it the
        hard way.
start-sanitize-d30v
        * configure.tgt:  Add d30v.
        * d30v-tdep.c:  New file.
        * config/d30v/d30v.mt, config/d30v/tm-d30v.h:  New files.
end-sanitize-d30v

Tue Sep 23 11:24:13 1997  Stan Shebs  <[email protected]>

        * Makefile.in (ALLCONFIG): Remove, inaccurate and never used.

Tue Sep 23 00:08:18 1997  Peter Schauer  ([email protected])

        * mips-tdep.c (mips_push_arguments):  Tweak alignment of register
        value if the remaining length of a non-integral argument is smaller
        than the register size for big-endian non-EABI mode.

        * rs6000-tdep.c (branch_dest):  Handle return from signal
        handler function via sigreturn kernel call.

Mon Sep 22 15:32:06 1997  Dawn Perchik  <[email protected]>

        * stabsread.h, symtab.h, dbxread.c, symtab.c, stabsread.c:
        Fix prototypes.  Remove function scoped function declarations.

Fri Sep 19 18:51:26 1997  Felix Lee  <[email protected]>

        * config/i386/windows.mh (XDEPFILES): need to list some files
        explicitly, for odd reasons.

start-sanitize-java     
Tue Sep 16 20:00:05 1997  Per Bothner  <[email protected]>

        * jv-exp.y (push_fieldnames):  New, to handle EXP.FIELD1....FIELDN.
        (push_expression_name):  New, to handle expression names.
        (push_qualified_expression_name):  New, for qualified expression names.
        (parse_number):  Fix bugs in parsing of non-decimal integers.
        * jv-lang.h, jv-lang.c (java_demangle_type_signature):  New.
        * jv-lang.c (type_from_class):  Just use name with java_lookup_class.
        (java_link_class_type):  Add dummy "class" field.
        (java_lookup_type):  New.
        (evaluate_subexp_java case STRUCTOP_STRUCT):  Force to address.
        * jv-typeprint.c (java_type_print_base):  Don't print "class" field.
        Use java_demangle_type_signature to print array class types.
        * jv-valprint.c (java_value_print):  Preliminary array support.
        Print pointer as TYPE@HEXADDR, instead of (TYPE)0xHEXADDR.
        (java_val_print):  Move check for object type to java_value_print.
        Check for null.  Print pointer as @HEXADDR, not 0xHEXADDR.

        * valops.c (search_struct_field):  Search basesclasses in
        ascending, not descending order.  Hack to avoid virtual baseclass
        botch for Java interfaces.

end-sanitize-java       
Tue Sep 16 19:56:23 1997  Per Bothner  <[email protected]>

        * util.c (run_cleanup_chain, make_run_cleanup, do_run_cleanups):
        New cleanup clean for cleanups to be run when at each 'run' command.
        * infcmd.c (run_command):  Call do_run_cleanups.

        * solib.c (find_solib):  Register cleanup to call clear_solib
        on a new 'run' command.
        (symbol_add_stub):  First look for existing objfile with same name.

Tue Sep 16 16:00:01 1997  Stan Shebs  <[email protected]>

        * remote-sds.c (sds_load): New function.
        (sds_ops): Use it.
        (sds_open): Don't set inferior_pid yet.
        (sds_kill): Remove contents.
        (sds_create_inferior): Rewrite to work more like monitor
        interfaces.
        (sds_restart): Remove, no longer used.

        * monitor.h (MO_SREC_ACK_PLUS, MO_SREC_ACK_ROTATE): New flags.
        * monitor.c (monitor_wait_srec_ack): Add DINK32-specific ack code.
        * dsrec.c (load_srec): Always write a header S-record.
        * dink32-rom.c (dink32_regnames): Fix the names of float registers.
        (dink32_cmds): Set to use S-record downloading with acks.
        * remote-est.c (est_cmds): Add MO_SREC_ACK_PLUS flag.

Tue Sep 16 10:08:27 1997  Andrew Cagney  <[email protected]>

        * config/v850/tm-v850.h (BREAKPOINT): Set to a truely illegal
        instruction.

        * exec.c (exec_file_command): Call set_architecture_from_file.

Mon Sep 15 13:01:22 1997  Mark Alexander  <[email protected]>

        * dbxread.c (MSYMBOL_SIZE): New macro.
        (end_psymtab): Use MSYMBOL_SIZE to extract size from minimal symbol.
        * elfread.c (elf_symtab_read): If ELF symbol is "special",
        such as a MIPS16 function, mark minimal symbol as special too.
        * mips-tdep.c (pc_is_mips16): New function to check whether
        a function is MIPS16 by looking at the minimal symbol.  Use
        pc_is_mips16 throughout instead of IS_MIPS16_ADDR macro.
        * config/mips/tm-mips.h (SYMBOL_IS_SPECIAL, MAKE_MSYMBOL_SPECIAL,
        MSYMBOL_IS_SPECIAL, MSYMBOL_SIZE): New functions for setting/testing
        "special" MIPS16 bit in ELF and minimal symbols.
        * mdebugread.c (parse_partial_symbols): Don't construct a partial
        symbol table for a file that already has one.
start-sanitize-tx19
        * configure.tgt: Support TX19.
        * config/mips/tm-tx19.h, config/mips/tm-tx19l.h, config/mips/tx19.mt,
        config/mips/tx19l.mt: New files for TX19.
end-sanitize-tx19

Sat Sep 13 08:32:13 1997  Peter Schauer  ([email protected])

        * mdebugread.c (parse_symbol, handle_psymbol_enumerators):  Handle
        yet another variant of enumerator debugging info, used by DU 4.0
        native cc.

Tue Sep  9 20:47:23 1997  Felix Lee  <[email protected]>

        * config/i386/windows.mh (XDEPFILES): reduce to libwingdb.a.
        otherwise link command line is too long.

Tue Sep  9 17:41:41 1997  Jeffrey A Law  ([email protected])

        * symtab.c, dbxread.c, stabsread.c: Fix up ANSI-C isms.  Fix
        some formatting problems.

Mon Sep  8 16:45:51 1997  Stu Grossman  <[email protected]>

        * ser-e7kpc.c:  Don't include w32sut.h.  We no longer use the UT
        mechanism.  Remove prototypes for dos_async_* functions.  They don't
        exist anymore.

Mon Sep  8 12:48:50 1997  Ian Lance Taylor  <[email protected]>

        * top.c (quit_confirm, quit_force): New functions, broken out of
        quit_command.
        (quit_command): Just call quit_confirm and quit_force.
        * top.h (quit_confirm, quit_force): Declare.

Sun Sep  7 17:26:30 1997  Dawn Perchik  <[email protected]>

        * dbxread.c, buildsym.c, symtab.c, stabsread.c: Add support for 
        reading stabs extensions for live range information.
        * stabsread.h, partial-stab.h: Add prototypes for new functions.
        * symtab.h: Add structure for storing live range information.

Wed Sep  3 16:39:39 1997  Andrew Cagney  <[email protected]>

        * top.c (set_arch): New function, update target_architecture.
        
        * defs.h, top.c (set_architecture_from_arch_mach): Replace
        set_architecture, takes the arch and machine as arguments.

        * sh3-rom.c (sh3e_open): Update.
        (sh3_open): Ditto.

Tue Sep  2 12:00:46 1997  Andrew Cagney  <[email protected]>

        * remote-e7000.c (e7000_fetch_registers): Fix typo, stray paren.
        (e7000_wait): Ditto.

Mon Sep  1 11:21:03 1997  Andrew Cagney  <[email protected]>

        * top.c (init_main): Add ``set processor'' as an alias for ``set
        architecture''.

Sat Aug 30 13:44:48 1997  Bob Manson  <[email protected]>

        * config/sparc/sparclite.mt: Removed simulator references (erc32
        has been disabled).

Thu Aug 28 10:20:04 1997  Andrew Cagney  <[email protected]>

        * remote-e7000.c (e7000_fetch_registers): Check
        target_architecture instead of sh_processor_type.
        (e7000_wait): Ditto.

        * config/sh/tm-sh.h (sh_set_processor_type): Delete prototype.

        * sh3-rom.c (sh3_open): Call set_architecture not
        sh_set_processor_type.
        (sh3e_open): Ditto.

        * sh-tdep.c (sh_show_processor_type_command): Delete.
        (sh_set_processor_type_command): Delete.
        (sh_target_architecture_hook): Rename from sh_set_processor_type,
        use AP to determine architecture.
        (sh_show_regs): Use bfd_mach_sh* types.

        * remote-sim.c (gdbsim_open): Pass --arch=XXX to simulator when
        architecture was specified explicitly.

        * defs.h (target_architecture, target_architecture_auto,
        set_architecture, set_architecture_from_file): Declare.
        (target_architecture_hook): Allow targets to be notified of set
        arch commands.
        
        * top.c (init_main): Add set/show/info architecture commands.
        (set_architecture, show_architecture, info_architecture): New
        functions, parse same.
        (set_architecture_from_file): New function, determine arch from
        BFD.
        
Tue Aug 26 17:13:43 1997  Andrew Cagney  <[email protected]>

        * remote-sim.c (gdbsim_open): Only pass endianness to sim_open
        when set explicitly.  Prepend endianness arg so that it can be
        overridden.

        * defs.h, top.c (target_byte_order_auto): Make global when
        byteorder is selectable.

Tue Aug 26 15:19:56 1997  Andrew Cagney  <[email protected]>

        * remote-sim.c (gdbsim_create_inferior): Pass exec_bfd into
        sim_create_inferior.
        (gdbsim_create_inferior): Pass -1 to proceed, sim_create_inferior
        has already set the PC.
        (gdbsim_create_inferior): Allow exec_file to be NULL, make "No
        exec file" a warning.  Ditto for "No program loaded".

Mon Aug 25 17:08:01 1997  Geoffrey Noer  <[email protected]>

        * ocd.c: revert Sun change -- enable log file handling

Mon Aug 25 12:21:46 1997  Andrew Cagney  <[email protected]>

        * remote-sim.c (gdbsim_open): Pass exec_bfd to sim_open call.

Sun Aug 24 21:16:59 1997  Geoffrey Noer  <[email protected]>

        * ocd.c: comment out sections that create and flush wigglers.log
        log file when using the wiggler.

Thu Aug 21 16:18:08 1997  Geoffrey Noer  <[email protected]>

        * config/powerpc/ppc-eabi.mt:
        * config/powerpc/ppc-sim.mt:
        * config/powerpc/ppcle-eabi.mt:
        * config/powerpc/ppcle-sim.mt: ser-ocd.c needs to be before
        other ocd-related files in TDEPFILES

Thu Aug 21 14:56:04 1997  Geoffrey Noer  <[email protected]>

        * ppc-bdm.c (bdm_ppc_wait): stop printfing ecr, der
        * ocd.c: initialize remote_timeout
        (ocd_wait): while looping, call ocd_do_command with OCD_AYT 
        (ocd_get_packet): remove find_packet goto.  If there isn't
        an 0x55 at the start, something is quite wrong so error out
        instead of advancing in the packet and trying again.  If checksum
        is invalid, print error message instead of trying again.
        * ser-ocd.c (ocd_readchar): error if we attempt to read past
        the end of the from_wiggler_buffer.


Wed Aug 20 14:08:39 1997  Stan Shebs  <[email protected]>

        * dink32-rom.c: Don't use "mf" command to fill, is too picky
        about alignment.


Tue Aug 19 08:41:36 1997  Fred Fish  <[email protected]>

        * objfiles.c (objfile_relocate): Add call to breakpoint_re_set
        after relocations are complete.
        * remote-vx.c (vx_add_symbols): Remove call to breakpoint_re_set,
        this is now done in objfile_relocate.

Mon Aug 18 17:29:54 1997  Ian Lance Taylor  <[email protected]>

        * win32-nat.c (handle_exception): Return a value indicating
        whether the exception was handled.  Don't handle random exceptions
        the first time around, so that structured exception handling
        works.
        (child_wait): Check the return value of handle_exception.  Set the
        continue_status argument to ContinueDebugEvent accordingly.

start-sanitize-v850e
Mon Aug 18 11:14:15 1997  Nick Clifton  <[email protected]>

        * configure.tgt: Add support for v850ea target.
end-sanitize-v850e

Sun Aug 17 20:31:57 1997  Michael Snyder  ([email protected])

        * m32r-stub.c: fix typo

Sun Aug 17 17:33:34 1997  Stan Shebs  <[email protected]>

        * remote-sds.c: Remove unused remnants of remote.c.
        (tob64): Return the result length.
        (sds_interrupt): Send a stop message.
        (sds_wait): Add debug output for signal interpretation, flag
        that signal was due to a trap.
        (sds_fetch_registers): Fill the registers array correctly for
        PowerPC.
        (sds_store_registers): Get the right values from registers array.
        (putmessage): Tweak length handling so checksum comes out right.
        (sds_insert_breakpoint, sds_remove_breakpoint): Do correctly.

Fri Aug 15 20:53:13 1997  Ian Lance Taylor  <[email protected]>

        * Makefile.in (init.c): Don't use xargs.

Fri Aug 15 13:59:37 1997  Peter Schauer  ([email protected])

        * infrun.c (wait_for_inferior):  Add the symbols for any
        newly loaded objects upon a TARGET_WAITKIND_LOADED event.

        Rewrite code which determines the TOC address for calling functions
        in the inferior under AIX.
        * rs6000-nat.c (find_toc_address):  New function to determine
        the required TOC address from a function address.
        (_initialize_core_rs6000):  Set up find_toc_address_hook to point
        to find_toc_address.
        (xcoff_relocate_symtab, xcoff_relocate_core):  Remove
        add_text_to_loadinfo calls.
        (exec_one_dummy_insn):  Change pid and status to int to get rid of
        compiler warnings.
        (xcoff_relocate_symtab):  Cast ldi to `int *' when passing it to
        ptrace to get rid of compiler warnings.
        * rs6000-tdep.c:  Add definition for find_toc_address_hook.
        (rs6000_fix_call_dummy):  If find_toc_address_hook is non zero,
        patch TOC address load code in the call dummy with the value
        returned from find_toc_address_hook.
        (struct loadinfo, loadinfo, loadinfolen,
        loadinfotextindex, xcoff_init_loadinfo, free_loadinfo,
        xcoff_add_toc_to_loadinfo, add_text_to_loadinfo, find_toc_address):
        Remove.
        (_initialize_rs6000_tdep):  Remove initialization of
        coff_add_toc_to_loadinfo_hook and xcoff_init_loadinfo_hook.
        * xcoffread.c (coff_add_toc_to_loadinfo_hook,
        xcoff_init_loadinfo_hook):  Remove.
        (struct coff_symfile_info):  Add toc_offset field.
        (scan_xcoff_symtab):  Record toc_offset value in toc_offset field
        instead of calling xcoff_add_toc_to_loadinfo_hook.
        (get_toc_offset):  New function to return the value of the
        toc_offset field for an object file.
        (xcoff_initial_scan):  Remove call of xcoff_init_loadinfo_hook.
        * xcoffsolib.h (add_text_to_loadinfo):  Remove declaration.
        * config/rs6000/tm-rs6000.h:  Add declarations for
        find_toc_address_hook and get_toc_offset.

Wed Aug 13 19:31:28 1997  Stan Shebs  <[email protected]>

        * remote-sds.c: New file, interface to SDS-compatible monitors.
        * Makefile.in (remote-sds.o): Add build rule.
        * config/powerpc/ppc-eabi.mt, config/powerpc/ppc-sim.mt
        (TDEPFILES): Add remote-sds.o.

Tue Aug 12 14:37:18 1997  Geoffrey Noer  <[email protected]>

        * ocd.c (ocd_wait): loop until we're in BDM mode instead of
        assuming control has returned to GDB.

Mon Aug 11 19:16:04 1997  Stan Shebs  <[email protected]>

        * dink32-rom.c: New file, support for DINK32 monitor.
        * Makefile.in (dink32-rom.o): Add build rule.
        * config/powerpc/ppc-eabi.mt, config/powerpc/ppc-sim.mt
        (TDEPFILES): Add dink32-rom.o.
        * monitor.h (MO_32_REGS_PAIRED, MO_SETREG_INTERACTIVE,
        MO_SETMEM_INTERACTIVE, MO_GETMEM_16_BOUNDARY,
        MO_CLR_BREAK_1_BASED): New monitor interface flags.
        * monitor.c: Use them.
        (monitor_store_register): Use setreg.term if defined.
        (monitor_insert_breakpoint, monitor_remove_breakpoint): Notice
        if set_break and clr_break fields are empty.

Mon Aug 11 16:22:36 1997  Geoffrey Noer  <[email protected]>

        * ocd.c (ocd_insert_breakpoint, ocd_remove_breakpoint): Macro
        BDM_BREAKPOINT already has braces around it, remove erroneous ones.
        * ser-ocd.c (ocd_write): Conditionalize on _WIN32 instead of
        __CYGWIN32__.
        * config/powerpc/tm-ppc-eabi.h: Remove BDM_NUM_REGS, BDM_REGMAP
        * ppc-bdm.c: move BDM_NUM_REGS, BDM_REGMAP here from tm.h file,
        fill in doc fields of bdm_ppc_ops.
        (bdm_ppc_fetch_registers): Don't ask for invalid registers such
        as the MQ or floating point regs not present on ppc 8xx boards.
        (bdm_ppc_store_registers): Don't write those same invalid registers.
        * config/i386/cygwin32.mh: Stop including ocd.o ser-ocd.o.
        * config/powerpc/ppc-eabi.mt:
        * config/powerpc/ppcle-eabi.mt:
        * config/powerpc/ppc-sim.mt:
        * config/powerpc/ppcle-sim.mt: Include ser-ocd.o.

Mon Aug 11 16:08:52 1997  Fred Fish  <[email protected]>

        * frame.h (enum lval_type): Conditionalize on __GNUC__
        instead of __STDC__.

Sun Aug 10 19:08:26 1997  Jeffrey A Law  ([email protected])

        * utils.c (error): Fix return type for !ANSI_PROTOTYPES.

Sun Aug 10 16:49:09 1997  Geoffrey Noer  <[email protected]>

        * ocd.c: move ocd_write_bytes proto to ocd.h since it is used
        by ppc-bdm.c, use OCD_LOG_FILE to help debugging, define
        BDM_BREAKPOINT if not defined in tm.h
        (ocd_error): add new error cases
        (ocd_start_remote): send the OCD_INIT command before
        OCD_AYT and OCD_GET_VERSION calls, 80 was correct speed after all
        (ocd_write_bytes): no longer static
        (ocd_insert_breakpoint): no longer static
        (ocd_remove_breakpoint): new
        * ocd.h: add protos for ocd_write_bytes, ocd_insert_breakpoint,
        and ocd_remove_breakpoint
        * ppc-bdm.c: change bdm_ppc_ops so we call ocd_insert_breakpoint
        and ocd_remove_breakpoint instead of memory_insert_breakpoint
        and memory_remove_breakpoint.
        (bdm_ppc_open): after calling ocd_open, modify DER
        register so interrupts will drop us into debugging mode, finally
        disable the watchdog timer on the board so we don't leave BDM
        mode unexpectedly.

Sat Aug  9 01:50:14 1997  Peter Schauer  ([email protected])

        * values.c (value_primitive_field):  Account for offset when
        extracting the value of a bitfield.
        From Paul Hilfinger <[email protected]>.

Fri Aug  8 21:35:44 1997  Mark Alexander  <[email protected]>

start-sanitize-tic80
        * config/tic80/tic80.mt:
        (GDBSERVER-DEPFILES, GDBSERVER_LIBS): Define for gdbserver.
        (SIM): Remove -lm to prevent make errors.
        * configure.tgt: add gdbserver to configdirs for tic80.
end-sanitize-tic80
        * gdbserver/utils.c (error): Change prototype to match defs.h.
        * gdbserver/low-sim.c: Change simulator calls to use new interface.
        * remote.c (remote_write_bytes): Include '$' at start of packet
        and checksum at end of packet in overhead calculation.

Fri Aug  8 15:59:24 1997  Ian Lance Taylor  <[email protected]>

        * ser-ocd.c: If _WIN32, include <windows.h>.
        (dll_do_command): New static variable if _WIN32.
        (ocd_open): Set dll_do_command if _WIN32.
        (ocd_write): Use dll_do_command rather than do_command.
        * config/i386/cygwin32.mh (XDEPFILES): Remove libwigglers.a.
        (BDM_DLLNAME, BDM_LIBNAME, BDM_DEFFILE): Don't define.
        ($(BDM_LIBNAME)): Remove target.
        * wigglers.def: Remove.

        * config/i386/cygwin32.mh ($(BDM_LIBNAME)): Rename target from
        libwigglers.def.
        (libwigglers.a): Remove target.

Fri Aug  8 13:11:01 1997  Mike Meissner  <[email protected]>

        * config/powerpc/ppc{,le}-{eabi,sim}.mt (TDEPFILES): Make sure
        ppc-bdm.o and ocd.o are used for all powerpc-eabi targets.

Thu Aug  7 19:40:52 1997  Geoffrey Noer  <[email protected]>

        Changes to OCD support to support wiggler box as well as
        target boxes:
        * ocd.c: change speed in init command to 0 from 80,
        add (temporary) logging commands to help debugging,
        (ocd_open): if "target ocd wiggler lpt" then use special
        ser-ocd.c serial interface which communicates with Wigglers.dll,
        otherwise ("target ocd <foo>") do as we did before
        (ocd_get_packet): add OCD_LOG_FILE and OCD_SET_CONNECTION to
        switch of known commands of len 0
        * ocd.h: add OCD_LOG_FILE
        * serial.c (serial_open): do serial_interface_lookup on ocd
        in the case of ocd
        * ser-ocd.c: add buffer to contain responses from sending a
        command to the Wigglers.dll.
        (ocd_readchar): return curr char from buffer and increment ptr
        (ocd_write): send buffer to Wigglers.dll, storing response in
        return buffer and initializing curr location ptr to start of
        buffer.

Thu Aug  7 13:39:31 1997  Geoffrey Noer  <[email protected]>

        * ocd.h: add OCD_SET_CONNECTION
        * ocd.c: rename "do_command" to "ocd_do_command" 

Thu Aug  7 13:09:17 1997  Geoffrey Noer  <[email protected]>

        Nomenclature change.  BDM is a specific type of OCD
        (On Chip Debugging).  Wiggler is the parallel port box controlled
        by Wigglers.dll.  The faster target box from Macraigor Systems
        is not a wiggler.  
        * ocd.c:
        * ocd.h:
        * ppc-bdm.c:
        * ser-ocd.c:
        Replace all instances of "wiggler_" with "ocd_" and change most other
        instances of "wiggler" to "ocd" or "ocd device" depending on context.
        * config/m68k/monitor.mt: remove remote-wiggler.o from TDEPFILES
        until OCD with that target is supported again.

Wed Aug  6 16:15:31 1997  Geoffrey Noer  <[email protected]>

        * Makefile.in: add DLLTOOL = @DLLTOOL@, pass on DLLTOOL to
        sub makes, change clean rule to also remove *.a to remove
        libwigglers.a, in dependencies: add ppc-bdm.o ocd.o ser-ocd.o and
        remove remote-wiggler.o
        * configure.in: add DLLTOOL support
        * configure: regenerate
        * wigglers.def: new file for imports for wigglers.dll
        * ser-ocd.c: new file which is layer between ocd.c and either the
        wigglers.dll or the target box, only stub so far
        * config/powerpc/ppc-eabi.mt: add ppc-bdm.o to TDEPFILES
        * config/powerpc/ppc-sim.mt: add ppc-bdm.o to TDEPFILES
        * config/i386/cygwin32.mh: add ocd.o ser-ocd.o libwigglers.a
        to XDEPFILES, add rules to build libwigglers.a

        checking in changes of Stu Grossman  <[email protected]>:
        * remote-wiggler.c: delete
        * ocd.c: new, was remote-wiggler.c
        always include sys/types.h, include ocd.h, move WIGGLER
        commands and many wiggler prototypes to ocd.h, make wiggler_desc
        static, stop making local wiggler functions static,
        define write_mem_command for wiggler_write_bytes
        (wiggler_start_remote): stop hardcoding the target type,
        instead set and use a target_type variable.
        (wiggler_open): add new target_type and ops args
        (wiggler_wait): now no longer takes pid and target_status as args,
        stop trying to set target_status struct, remove BGND insn
        checks
        (read_bdm_registers): renamed to wiggler_read_bdm_registers     
        (wiggler_read_bdm_registers): numregs arg changed to reglen arg,
        remove pktlen check, set reglen instead of numregs 
        (dump_all_bdm_regs): delete
        (wiggler_fetch_registers): delete
        (wiggler_prepare_to_store): now just an empty function
        (wiggler_store_registers): delete
        (wiggler_read_bdm_register): new
        (wiggler_write_bdm_registers): new
        (wiggler_write_bdm_register): new
        (wiggler_write_bytes): use write_mem_command variable instead of
        WIGGLER_WRITE_MEM
        (get_packet): renamed to wiggler_get_packet, change refs throughout
        (put_packet): renamed to wiggler_put_packet, change refs throughout
        (wiggler_get_packet): add break to default case of switch,
        change length of WIGGLER_GET_VERSION len to 10 from 4 to match
        specs
        (wiggler_mourn): unpush_target with current_ops, not &wiggler_ops
        (flash_xfer_memory): delete
        (noop_store_registers): new placeholder replacement for
        target_store_registers() which prevents generic_load from trying to
        set up the PC.
        (bdm_update_flash_command): add store_registers_tmp variable,
        make handling of wiggler_ops more generic -- define wiggler_ops
        in a target-specific file instead (such as ppc-bdm.c in the case
        of the ppc), use current_target to deal with registers again
        making this file less target-specific.
        (bdm_read_register_command): new
        (_initialize_remote_wiggler): stop doing add_target (&wiggler_ops),
        comment out add_cmd ("read-register", ...)
        * ocd.h: new, contains common wiggler prototypes, command definitions
        * ppc-bdm.c: file for ppc-specific OCD code, including target_ops
        structure for ppc bdm
        (bdm_ppc_open): new
        (bdm_ppc_wait): new
        (bdm_ppc_fetch_registers): new
        (bdm_ppc_store_registers_: new
        (_initialize_bdm_ppc): new
        * config/powerpc/tm-ppc-eabi.h: add necessary CPU32 BDM defines

start-sanitize-tic80
Tue Aug  5 23:56:14 1997  Mark Alexander  <[email protected]>

        * tic80-tdep.c (tic80_init_extra_frame_info): Allow zero
        as a valid SP-relative offset of a saved register.
        
end-sanitize-tic80
Wed Aug  6 00:24:08 1997  Jeffrey A Law  ([email protected])

        * hpread.c (hpread_read_struct_type): Use accessor macros rather
        than directly mucking around with data structures.

Tue Aug  5 13:37:14 1997  Per Bothner  <[email protected]>

        * gdbtypes.h:  Re-interpret struct field.  Suppport address of static.
        Add a bunch of macros.
        * coffread.c, dwarf2read.c, dwarfread.c, mdebugread.c, stabsread.c:
        Update to use new macros.
        * coffread.c, hpread.c, stabsread.c:  Remove bugus TYPE_FIELD_VALUE.
        * value.h, values.c (value_static_field):  New function.
        * cp-valprint.c, valops.c:  Modify to use value_static_field.
start-sanitize-java     

        * jv-lang.c (get_java_utf8_name):  Re-write so it works with
        implied (missing) data field, as defined by cc1java.
        (java_link_class_type):  Type length and field offset (in interior)
        now includes object header.  Get static fields working.
        * jv-lang.h (JAVA_OBJECT_SIZE):  Update for change in Kaffe.
        * jv-typeprint.c (java_type_print_derivation_info,
        java_type_print_base):  New functions, for better Java output.
        * jv-valprint.c:  Start to support Java-specific output.

end-sanitize-java       
Sun Aug  3 08:18:09 1997  Peter Schauer  ([email protected])

        * c-valprint.c (c_val_print):  Use extract_address to retrieve
        the address of the virtual function.
        From Peter Bloecher ([email protected]).

        * eval.c (evaluate_subexp_standard), valarith.c (value_x_unop):
        Handle C++ operator *.

Fri Aug  1 15:21:44 1997  Ian Lance Taylor  <[email protected]>

        * configure.in: Check for cygwin32 environment.  Define and
        substitute WIN32LIBS and WIN32LDAPP.  Always set configdir to
        unix; setting it to win was for an old Tcl/Tk configuration
        scheme.
        * Makefile.in (TK_CFLAGS): Add @TK_BUILD_INCLUDES@.
        (WIN32LDAPP, WIN32LIBS): Define.
        (CLIBS): Add $(WIN32LIBS).
        (gdb): Use $(WIN32LDAPP).
        * configure: Rebuild.

start-sanitize-java     
Thu Jul 31 15:40:19 1997  Per Bothner  <[email protected]>

        * symtab.h (SYMBOL_INIT_LANGUAGE_SPECIFIC, SYMBOL_INIT_DEMANGLED_NAME,
        SYMBOL_DEMANGLED_NAME):  Add demangling support for Java.
        * utils.c (fprintf_symbol_filtered):  Handle language_java.

        * symtab.c (decode_line_1):  Handle Java-style package.class.method.

Wed Jul 30 14:04:18 1997  Per Bothner  <[email protected]>

        * java-*:  Renamed to jv-*, to make fit within 14 characters.
        * jv-lang.h (java_type_print):  Added declaration.
        * jv-typeprint.c:  New file.  Provides java_print_type.
        * jv-lang.c (java_link_class_type):  New function.
        (java_language_defn):  Replace c_print_type by java_print_type.
        * Makefile.in:  Update accordingly.

end-sanitize-java       
Tue Jul 29 10:12:44 1997  Felix Lee  <[email protected]>

        * Makefile.in (init.c): except some mswin files do need to be
        scanned.  oh well.

Mon Jul 28 14:04:39 1997  Felix Lee  <[email protected]>

        * Makefile.in (init.c): don't try to scan mswin for _initialize
        funcs.  (generates misleading error message because files have
        .cpp suffix, not .c suffix)

Mon Jul 28 13:27:21 1997  Felix Lee  <[email protected]>

        * ser-e7kpc.c: <w32sut.h> -> "mswin/w32sut.h"

Mon Jul 28 02:54:31 1997  Peter Schauer  ([email protected])

        * xcoffread.c (coff_getfilename):  Do not strip directory component
        of filename.

Fri Jul 25 15:16:15 1997  Felix Lee  <[email protected]>

        * mon960-rom.c: removed unused #includes; no ioctl.h in Windows.
        * nindy-share/ttyflush.c: find sleep() for _MSC_VER.
        * remote-array.c: #include <ctype.h> for isascii().
        * utils.c (notice_quit,pollquit): cleanup.  _WIN32 -> _MSC_VER.

Fri Jul 25 16:48:18 1997  Jeffrey A Law  ([email protected])

        * top.c (execute_command): Force cleanup of alloca areas.
        * findvar.c (registers_changed): Likewise.

Fri Jul 25 15:37:15 1997  Stu Grossman  <[email protected]>

        * v850ice.c:  Include <windows.h>.  Support new v850 DLL interface.
        * Add defs for target status.

Tue Jul 22 12:11:48 1997  Michael Snyder  ([email protected])

        * config/mips/tm-mips64.h: longs, long longs, and pointers
        are all 64 bits on EABI mips targets.

Thu Jul 17 11:38:46 1997  Michael Snyder  ([email protected])

        * partial-stab.h (case N_BINCL): detect missing partial symtab.
        * dbxread.c: Add a complaint for N_BINCL without a corresponding
        partial symtab.  Remove earlier change of 5/27/97.

Wed Jul 16 10:38:03 1997  Michael Snyder  ([email protected])

        * sol-thread.c (sol_thread_[store, fetch]_registers): if 
        inferior_pid is an LWP rather than a Solaris thread, let
        procfs handle the request.
        (rw_common, sol_thread_xfer_memory): procfs_xfer_memory will
        only work if inferior_pid points to an LWP (rather than a 
        Solaris thread).  Use procfs_first_available to find a good LWP.
        (info_solthreads): added a maintenance command to list all 
        known Solaris threads and their attributes.
        * mips-tdep.c (mips_do_registers_info): Completely changed the
        output format to be neat and columnar.  Added the helper funcs
        do_fp_register_row and do_gp_register_row.  Also small mods to
        mips_print_register, which is still used to print a single reg.

Mon Jul 14 18:02:53 1997  Michael Snyder  ([email protected])

        * procfs.c (wait_fd): Handle an fd that has "hung up" or 
        otherwise terminated (Solaris threads).

Thu Jul 10 00:02:41 1997  Martin M. Hunt  <[email protected]>

        * defs.h (init_ui_hook): Change prototype to accept one arg.
        * main.c (gdb_init): Change prototype to accept one arg.
        * top.c (gdb_init): Accepts one argument which it uses to
        call (*init_ui_hook).

Fri Jul  4 14:49:33 1997  Ian Lance Taylor  <[email protected]>

        * source.c (OPEN_MODE, FDOPEN_MODE): Define; value depends upon
        whether CRLF_SOURCE_FILES is defined.
        (open_source_file): Use OPEN_MODE with open and openp.
        (print_source_lines): Use FDOPEN_MODE with fdopen.  If
        CRLF_SOURCE_FILES is defined, ignore \r characters.
        (forward_search_command): Use FDOPEN_MODE with fdopen.
        (reverse_search_command): Likewise.
        * config/i386/xm-cygwin32.h (CRLF_SOURCE_FILES): Define.
        (LSEEK_NOT_LINEAR): Don't define.

Thu Jul  3 17:41:46 1997  Michael Snyder  ([email protected])

        * mips-tdep.c (mips_extract_return_value): align 4-byte float
        return values within the 8-byte FP register.

Thu Jul  3 13:48:11 1997  Michael Snyder  ([email protected])

        * mips-tdep.c (mips_push_arguments): don't left-adjust 32-bit
        integers in 64-bit register parameters before function calls.

Mon Jun 30 17:54:51 1997  Michael Snyder  ([email protected])

        * mips-tdep.c (mips_push_arguments): special-case handling for
        odd-sized struct parameters passed in registers / on stack.

Mon Jun 30 15:30:38 1997  Michael Snyder  ([email protected])

        * mips-tdep.c (mips_push_arguments): tweak alignment of small
        structs passed in registers for little-endian non-EABI mode.

Mon Jun 30 13:05:39 1997  Michael Snyder  ([email protected])

        * breakpoint.c (frame_in_dummy): use generic dummy if available.
          (check_duplicates, clear_command): compare sections only if
          doing overlay debugging.

Fri Jun 27 23:03:53 1997  Fred Fish  <[email protected]>

        * buildsym.h (struct subfile): Add debugformat member.
        (record_debugformat): Declare global function.
        * buildsym.c (start_subfile): Initialize debugformat member
        to NULL.
        (record_debugformat): New function to record the format.
        (end_symtab): Copy format into symtab debugformat member.
        (end_symtab): Free subfile debugformat member.
        * symmisc.c (free_symtab): Free debugformat when freeing
        symtab.
        * symfile.c (allocate_symtab): Initialize the new debugformat
        member for new symtabs.
        * symtab.h (struct symtab): Add debugformat member.
        * source.c (source_info): Print the debug format.

        * os9kread.c (os9k_process_one_symbol): Call record_debugformat
        with "OS9".
        * hpread.c (hpread_expand_symtab): Call record_debugformat
        with "HP".
        (hpread_process_one_debug_symbol): Ditto.
        * dbxread.c (process_one_symbol): Call record_debugformat
        with "stabs".
        * coffread.c (coff_start_symtab): Call record_debugformat
        with "COFF".
        * xcoffread.c (read_xcoff_symtab): Call record_debugformat
        with "XCOFF".
        * dwarfread.c (read_file_scope): Call record_debugformat
        with "DWARF 1".
        * dwarf2read.c (read_file_scope): Call record_debugformat
        with "DWARF 2".
        * dstread.c (dst_end_symtab): Set debugformat to be
        "Apollo DST".
        * mdebugread.c (new_symtab): Set debugformat to be "ECOFF".

Fri Jun 27 21:05:45 1997  Michael Snyder  ([email protected])

        * mips-tdep.c (mips_push_arguments): handle alignment of
        integer and struct args on stack for mips64 big-endian.

Fri Jun 27 19:19:12 1997  Michael Snyder  ([email protected])

        * config/mips/tm-mips.h (USE_STRUCT_CONVENTION): MIPS_EABI returns
        structs in a register wherever possible.
        * mips-tdep.c (mips_extract_return_value): handle structs.
        (mips_store_return_value): handle values smaller than MIPS_REGSIZE
        (including structs, if gdb ever allows it).

Fri Jun 20 17:58:34 1997  Fred Fish  <[email protected]>

        * sh-tdep.c (sh_skip_prologue): Also recognize fmov insns.
        (sh_frame_find_saved_regs): Recognize fmov insns and adjust
        stack push count accordingly.
        * sh-tdep.c (IS_FMOV, FPSCR_SZ): New defines

Thu Jun 19 08:18:48 1997  Mark Alexander  <[email protected]>

        * utils.c (floatformat_from_doublest): Improve test for infinity.

Wed Jun 18 13:47:52 1997  Fred Fish  <[email protected]>

        * dwarfread.c (isreg, optimized_out, offreg, basereg): Move
        global variables into the struct dieinfo structure.
        (locval): Pass pointer to a dieinfo struct rather than a
        pointer to the raw location information.  Change prototype.
        Set isreg, optimized_out, offreg and basereg as appropriate.
        (struct_type): Call locval with dieinfo struct pointer.
        (new_symbol): Ditto.
        (new_symbol): Call locval and save location before testing
        the values of the new dieinfo struct flags, set by locval.

Tue Jun 17 13:30:12 1997  Peter Schauer  ([email protected])

        * procfs.c (proc_set_exec_trap, procfs_init_inferior, procfs_wait,
        unconditionally_kill_inferior):  Undo Oct 26 1996 and Apr 26 1997
        changes to trace PRFS_STOPTERM and handle PR_DEAD.
        These changes tried to work around a problem with an early DU 4.0
        release, but they trigger subtle timing dependent kernel bugs
        in older OSF/1 releases.

Tue Jun 17 06:52:47 1997  Fred Fish  <[email protected]>

        * dwarfread.c (new_symbol): Use SYMBOL_VALUE_ADDRESS, instead of
        SYMBOL_VALUE, to set the value of LOC_STATIC symbols.

Mon Jun 16 18:38:28 1997  Mark Alexander  <[email protected]>

        * infrun.c (wait_for_inferior): Mark registers as invalid when
        stepping over an instruction that triggered a watchpoint.
        * remote-mips.c: Numerous changes to support hardware breakpoints
        and watchpoints on LSI MiniRISC and TinyRISC boards.
        * mips-tdep.c: Move MIPS16-related macros to config/mips/tm-mips.h.
        (mips_breakpoint_from_pc): Account for different breakpoint
        instructions used by PMON and IDT monitor.
        * config/mips/tm-embed.h: Enable hardware breakpoints on embedded
        MIPS targets.
        * config/mips/tm-mips.h: Define breakpoint instructions for
        PMON and IDT monitor.  Move MIPS16-related macros here from
        mips-tdep.c.
        
Fri Jun 13 13:44:47 1997  Michael Snyder  ([email protected])

        * config/mips/tm-tx39[l].h, tx39[l].mt: change r3900 target to tx39.

Fri Jun 13 14:14:10 1997  Jeffrey A Law  ([email protected])

        * mn10300-tdep.c (mn10300_analyze_prologue): Fix some comments.
        Add missing return statements after finding an "add imm{16,32},sp"
        instruction.
        (mn10300_frame_chain): Add in size of our register save area to find
        our caller's frame if our caller does not have a frame pointer.

Fri Jun 13 12:55:49 1997  Doug Evans  <[email protected]>

        * symfile.c (generic_load): Check return code of target_write_memory.

Fri Jun 13 10:28:09 1997  Fred Fish  <[email protected]>

        * config/i386/nm-linux.h: Enable prototypes that were #ifdef out.
        * config/tm-sysv4.h (in_plt_section): Add prototype.

        * maint.c (maintenance_translate_address): Avoid assignment
        inside if, per GNU coding standards.
        * symfile.c (simple_read_overlay_table): Avoid assignments inside if, 
        per GNU coding standards.

        * monitor.c (parse_register_dump): Is really a void function.
        Add prototype.
        (monitor_read_memory): Remove unused variable "name".
        (monitor_read_memory): Remove unused variable "regbuf".
        (monitor_open): Remove unused variable "i".
        (get_hex_word): Apparently unused, #if away for now.
        (from_hex): Ditto.

        * i386v4-nat.c (supply_fpregset): Remove unused variable "regi".
        (fill_fpregset): Remove unused variables "regi", "to", "from" and
        "registers".

        * remote-e7000.c (ctype.h): Include.
        (e7000_insert_breakpoint): #if away unused arg used by unused expr.
        * frame.h (generic_get_saved_register): Add prototype.
        (enum lval_type): Add partial forward decl.
        * dsrec.c (make_srec): Remove unused variable "type_code".
        * remote-sim.c (gdbsim_wait): Handle sim_running and sim_polling
        cases by just ignoring them.
        (command.h): Include.

start-sanitize-java
        * java-exp.y (parse_number): Remove unused variable "unsigned_p".
        * java-lang.c (gdbcore.h): Include for prototypes.
        (type_from_class): Remove unused variable "ftype".
        (type_from_class): Remove unused variable "name_length".
        (evaluate_subexp_java): Add default case to handle remaining
        enumerations.
        * java-valprint.c (c-lang.h): Include for prototypes.

end-sanitize-java
        * symfile.c (simple_read_overlay_region_table): #if away
        unused function.
        (simple_free_overlay_region_table): Ditto.
        (overlay_is_mapped): Add default case to switch.
        (simple_read_overlay_region_table): Ditto.
        (simple_read_overlay_region_table): Add prototype.

        * symtab.c (fixup_symbol_section): Remove unused msym variable.
        (fixup_psymbol_section): Ditto.
        (find_pc_sect_symtab): Make distance a CORE_ADDR.

        * utils.c: Add comment about t_addr being either unsigned long or
        unsigned long long.
        (paddr): Change formats to match actual types args are cast to.
        (preg): Ditto.
        (paddr_nz): Ditto.
        (preg_nz): Ditto.

        * defs.h (perror_with_name): Is a NORETURN function.
        * utils.c (perror_with_name): Is a NORETURN function.
        (error): Is NORETURN independently of ANSI_PROTOTYPES.

        * symtab.c (fixup_symbol_section): Remove prototype.
        * symtab.h: (fixup_symbol_section): Add prototype.
        * m32r-rom.c (report_transfer_performance): Add prototype.
        * sparclet-rom.c: Ditto.
        * dsrec.c: Ditto.

        * c-exp.y (parse_number): Cast args to float* or double* as
        appropriate for conversion format.
start-sanitize-java
        * java-exp.y (parse_number): Ditto.
end-sanitize-java

        * Makefile.in (c-exp.tab.c): Remove #line lines that refer
        to nonexistant y.tab.c file.
start-sanitize-java
        (java-exp.tab.c): Ditto.
end-sanitize-java
        (f-exp.tab.c): Ditto.
        (m2-exp.tab.c): Ditto.

        * sh-tdep.c (symfile.h): Include.
        (gdb_string.h): Include.
        (sh_fix_call_dummy): Ifdef away, currently unused.
        * config/sh/tm-sh.h (pop_frame): Add prototype.
        * config/sh/tm-sh.h (sh_set_processor_type): Add prototype.

Sat Jun  7 02:34:19 1997  Peter Schauer  ([email protected])

        * eval.c (evaluate_subexp_for_sizeof):  Handle dereferencing
        of non-pointer values.

        * symtab.c (gdb_mangle_name):  Improve mangling of nested types,
        their physical names already include the class name.

        * valops.c (value_cast):  Handle upcast of a class pointer.

        From Andreas Schwab ([email protected]):
        * corelow.c (get_core_registers):  Make secname big enough.

Fri Jun  6 14:43:23 1997  Keith Seitz  <[email protected]>

        * config/sh/tm-sh.h: add define for FPSCR_REGNUM
        * sh-tdep.c (sh_show_regs): print out all registers for
        the current processor
        
Fri Jun  6 13:01:55 1997  Andrew Cagney  <[email protected]>

        * remote-sim.c (gdbsim_kill): Remove call to depreciated function
        sim_kill.

Thu Jun  5 11:39:03 1997  Ian Lance Taylor  <[email protected]>

        Fixes for recent correction to PE format:
        * coffread.c (pe_file): New static variable.
        (struct find_targ_sec_arg): Change resultp from pointer to int to
        pointer to pointer to asection.
        (find_targ_sec): Just store the section in args->resultp, not the
        section offset value.
        (cs_to_section): Compute the section offset value from the
        section.
        (cs_section_address): New static function.
        (coff_symfile_read): Set pe_file.
        (read_one_sym): When reading a PE file, adjust the symbol value to
        include the section address if the symbol has an appropriate
        storage class.

Tue Jun  3 16:24:46 1997  Michael Snyder  ([email protected])

        * configure.tgt: add mipsr3900-elf target
        * config/mips/r3900.mt r3900l.mt tm-r3900.h tm-r3900l.h: ditto

Tue May 27 10:34:11 1997  Michael Snyder  <[email protected]>

        * dbxread.c: Check malloc's return for null, prevent segv.

Fri May 23 14:45:02 1997  Bob Manson  <[email protected]>

        * infcmd.c (jump_command): Don't try to dereference sfn if it's
        NULL.

Fri May 23 13:51:57 1997  Andrew Cagney  <[email protected]>

        * top.c (init_cmd_lists): Always initialize endianlist.
        (init_main): Always define endian commands.
        (set_endian_big): Issue warning if endian not selectable.
        (set_endian_little): Ditto.
        (set_endian_auto): Ditto.

Thu May 22 11:53:21 1997  Andrew Cagney  <[email protected]>

        * remote-sim.c (simulator_command): Restrict access to the
        simulator to periods when the simulator is open.

Wed May 21 16:03:25 1997  Michael Snyder  <[email protected]>

        * procfs.c (init_procinfo): new function, abstracts some code
        shared by create_procinfo and do_attach; 
        (procfs_set_inferior_syscall_traps): new function, abstracts
        some code needed by procfs_init_inferior, do_attach, and 
        procfs_lwp_creation_handler; (procfs_first_available): new
        function, find any LWP that's runnable; (procfs_thread_alive):
        replace stub function with real implementation; 
        (procfs_lwp_creation_handler): fix bug starting new child 
        threads; (info_proc): bug fixes and enhancements for the 
        "INFO PROCESSES" command; (close_procinfo_file): call new
        function "delete_thread" to cleanup GDB's thread database;
        (proc_init_failed): add new argument "kill", to control whether
        process is killed (so this function can be shared by 
        create_procinfo and do_attach); (procfs_exit_handler): handle
        exit from an attached process, and cleanup procinfo handles
        when the process exits; (procfs_resume, procfs_wait): cleanup
        after a thread when it exits; (do_attach, do_detach): handle
        attached processes with multiple threads; plus some general 
        improvements in the diagnostic output.
        * sol-thread.c (sol_thread_alive): replace stub with real
        implementation; (thread_to_lwp, lwp_to_thread): enhance to 
        handle threads that may have exited; (sol_thread_attach): add
        startup setup stuff; (sol_thread_detach): add unpush_target
        call; (sol_thread_mourn_inferior): add unpush_target call;
        (sol_thread_wait, sol_thread_resume): enhance to deal with
        thread exit cleanly; (sol_thread_new_objfile, 
        sol_thread_pid_to_str): detect unsuccessful startup and 
        don't crash; plus some general cleanup.
        * thread.c (delete_thread): new function, allows targets to 
        notify gdb when a thread is no longer valid.
        * infrun.c (wait_for_inferior): don't try to detect a new
        thread on receiving a TARGET_EXITED event.
        
Tue May 20 09:32:02 1997  Andrew Cagney  <[email protected]>

        * remote-sim.c (gdbsim_open): Pass callback struct.
        (init_callbacks): Remove call to sim_set_callbacks.

Thu May 15 07:56:50 1997  Peter Schauer  ([email protected])

        * config/rs6000/tm-rs6000.h (SIG_FRAME_LR_OFFSET):  Define.
        * rs6000-tdep.c (frameless_function_invocation):  Mark frames
        with a zero PC as frameless to improve backtraces from core dumps
        caused by dereferencing a NULL function pointer.
        (frameless_function_invocation, frame_saved_pc, rs6000_frame_chain):
        Handle frameless functions interrupted by a signal.

        * sparc-tdep.c (sparc_init_extra_frame_info, sparc_frame_saved_pc):
        Handle frameless functions interrupted by a signal.

Wed May 14 08:58:55 1997  Jeffrey A Law  ([email protected])

        * mn10200-tdep.c (mn10200_analyze_prologue): Update prologue comments
        to reflect current reality.  Gross attempt at handling out of
        line prologues.

        * mn10200-tdep.c (mn10200_skip_prologue): Don't look at the debug
        symbols to find the end of the prologue.
        * mn10300-tdep.c (mn10300_skip_prologue): Likewise.

start-sanitize-tic80
Wed May 14 12:04:49 1997  Andrew Cagney  <[email protected]>

        * config/tic80/tm-tic80.h (NUM_REGS): 38 not 37.

end-sanitize-tic80
start-sanitize-tic80
Mon May 12 11:35:04 1997  Mark Alexander  <[email protected]>

        * tic80-tdep.c, config/tic80/tm-tic80.h: First cut at getting
        basic C80 features working.

end-sanitize-tic80
Thu May  8 08:42:47 1997  Andrew Cagney  <[email protected]>

        * configure.in (AC_TYPE_SIGNAL): Add
        * configure: Re-generate.
        * remote-sim.c: Signal returns RETSIGTYPE.
        
Wed May  7 20:05:07 1997  Andrew Cagney  <[email protected]>

        * target.h (target_stop): Drop argument so it can be tested for
        NULL.

Sat May  3 20:51:48 1997  Mark Alexander  <[email protected]>

        * utils.c (floatformat_from_doublest): Handle infinity properly.

Thu May  1 11:44:46 1997  Michael Snyder  <[email protected]>

        * Finalize merge from Hurd folk.  
            Mon Oct 30 16:41:04 1995  Miles Bader  <[email protected]>
            * thread.c (thread_apply_command, thread_apply_all_command,
            thread_command): Make sure TP is alive.
            (thread_alive): New function.
            Tue Nov 14 14:31:03 1995  Miles Bader  <[email protected]>
            * infrun.c (sig_print_info): Deal better with long signal names.
            Wed Nov 22 15:23:35 1995  Miles Bader  <[email protected]>
            * thread.c (thread_id_to_pid): New function.
            Fri Dec  1 13:25:25 1995  Miles Bader  <[email protected]>
            * gnu-nat.c: (set_thread_cmd_list, show_thread_cmd_list,
            set_thread_default_cmd_list, show_thread_default_cmd_list): 
            New variables.  (set_thread_cmd, show_thread_cmd, 
            set_thread_default_cmd, show_thread_default_cmd): New functions.
            Fri Apr 18 15:20:16 1997  Miles Bader  <[email protected]>
            * gnu-nat.c (inf_startup): remove TASK parameter. 
            (inf_set_task): replace with new function (inf_set_pid).  
          * gdbthread.h: Add extern decl for thread_cmd_list.
        
Thu May  1 02:28:21 1997  Peter Schauer  ([email protected])

        * printcmd.c (disassemble_command):  Adjust low function bound
        by FUNCTION_START_OFFSET.

start-sanitize-tic80
Wed Apr 30 15:23:02 1997  Andrew Cagney  <[email protected]>

        * config/tic80/tm-tic80.h (BREAKPOINT): Set it to trap 73.

end-sanitize-tic80
Mon Apr 28 21:25:32 1997  Michael Snyder  <[email protected]>

        * Makefile.in: Add rule for gnu-nat.o and i386gnu-nat.o (Gnu Hurd)
        * config/i386/i386gnu.mh: remove rules for [i386]gnu-nat.o, now 
        in Makefile.in (as for other targets); add NATDEPFILE corelow.o to 
        satisfy symbol dependancy in solib.c (core_ops).
        * target.[ch] conditionalize Mach-specific signals so that they
        won't show up in non-Mach gdb's!
        * thread.c: change name of static function "thread_switch" to 
        "switch_to_thread", to avoid conflict with Mach global symbol; 
        move thread_cmd_list to global scope so targets can add their 
        own thread commands.
        * infrun.c: sig_print_info: allow for long signal names.
        * gnu-nat.[ch]: tidying up comments.
        * gnu-nat.c: remove calls to prune_threads and renumber_threads; 
        gnu_wait must not return -1 when inferior exits; 
        attach_to_child will modify inferior_pid in a way that allows
        fork_inferior to remain unchanged; remove extra arg from 
        startup_inferior; move Mach thread commands here from thread.c.

Mon Apr 28 18:21:20 1997  Michael Snyder  <[email protected]>

        * symtab.c: decode_line_1, replace the assignment to 
        values.sals[0].pc which I accidentally left out on 4/3/97.

Mon Apr 28 17:27:40 1997  Michael Snyder  <[email protected]>

        * c-exp.y: make parse_number reject "123DEADBEEF".
        (fix by Bob Manson).
start-sanitize-java
        * java-exp.y: Ditto.
end-sanitize-java
        * top.c: change "to enable to enable" to "to enable" in a couple
        of help strings.

Mon Apr 28 09:01:59 1997  Mark Alexander  <[email protected]>

        * breakpoint.c (remove_breakpoint): Pass correct type to
        target_remove_watchpoint.
        * target.h: Improve comment for target_{remove,insert}_breakpoint.

Sat Apr 26 03:38:02 1997  Peter Schauer  ([email protected])

        * alpha-tdep.c (heuristic_proc_desc):  Increase search limit
        for return address register, handle `ret' instruction.

        * corelow.c (get_core_registers):  Initialize cf.

        * procfs.c:  Minor changes to make pre-ANSI compilers happy.
        (procfs_notice_signals):  Copy traced signal set back to
        pi->prrun.pr_trace.
        (unconditionally_kill_inferior):  If PR_DEAD is defined,
        rerun inferior after killing it.

Fri Apr 25 00:10:18 1997  Jeffrey A Law  ([email protected])

        * config/mn10300/tm-mn10300.h (EXTRACT_STRUCT_VALUE_ADDRESS): The
        structure value address is found in $a0 now.
        * config/mn10200/tm-mn10200.h (EXTRACT_STRUCT_VALUE_ADDRESS): Likewise.

Thu Apr 24 13:31:10 1997  Jeffrey A Law  ([email protected])

        * config/mn10300/tm-mn10300.h (STORE_RETURN_VALUE): Pointers are
        returned in $a0.
        (EXTRACT_RETURN_VALUE): Likewise.

        * mn10300-tdep.c (mn10300_analyze_prologue): Check for a return
        insn at "pc", not "fi->pc".

start-sanitize-tic80
Thu Apr 24 16:11:47 1997  Andrew Cagney  <[email protected]>

        * config/tic80/tm-tic80.h (NUM_REGS): Four 64bit accumulators.
        (REGISTER_BYTE, REGISTER_RAW_SIZE, REGISTER_SIZE,
        MAX_REGISTER_RAW_SIZE, REGISTER_VIRTUAL_TYPE): Adjust.
        (NPC_REGNUM): Tic80 has a delay slot.
        (R0_REGNUM, Rn_REGNUM, An_REGNUM): For sim, provide base/bound for
        register blocks.

end-sanitize-tic80
Wed Apr 23 11:18:45 1997  Jeffrey A Law  ([email protected])

        * config/mn10200/tm-mn10200.h (STORE_RETURN_VALUE): Pointers are
        returned in $a0.
        (EXTRACT_RETURN_VALUE): Likewise.

Tue Apr 22 11:58:15 1997  Fred Fish  <[email protected]>

        * config/arm/tm-arm.h (TARGET_DOUBLE_FORMAT): Define to use
        floatformat_ieee_double_littlebyte_bigword for little endian
        target byte order.
        * utils.c (floatformat_to_doublest): Create local preswapped
        copy of input for floatformat_littlebyte_bigword formats.
        (get_field, put_field): Treat floatformat_littlebyte_bigword
        the same as floatformat_little.
        (floatformat_from_doublest): Postswap output words for
        the floatformat_littlebyte_bigwords format.

start-sanitize-tic80
Mon Apr 21 22:44:47 1997  Andrew Cagney  <[email protected]>

        * config/tic80/tic80.mt (SIM): Link in simulator.

end-sanitize-tic80
Tue Apr 22 09:02:10 1997  Stu Grossman  ([email protected])

        * config/alpha/alpha-osf3.mh config/i386/{i386gnu linux}.mh
        config/mips/{embed embed64 embedl embedl64 vr4300 vr4300el vr5000
        vr5000el}.mt config/powerpc/{aix aix4}.mh config/rs6000/{aix
        aix4}.mh config/sh/sh.mt config/sparc/sp64sim.mt:
        config/v850/v850.mt:
        Remove -lm.  That's now handled by configure.

        * Makefile.in (maintainer-clean):  Add distclean to dependencies.
        Remove duplicate rm's of files.

Mon Apr 21 09:49:25 1997  Stu Grossman  ([email protected])

        * remote-pa.c:  Remove.  It's broken and no longer necessary.

start-sanitize-java
        Sat Apr 19 11:56:10 1997  Per Bothner  <[email protected]>

        * java-exp.y:  Combine TRUE and FALSE into BOOLEAN_LITERAL.
        (Avoids name clash with broken AIX header files.)

end-sanitize-java
Sat Apr 19 01:49:37 1997  Peter Schauer  ([email protected])

        * serial.c (serial_log_command):  Fix fputs_unfiltered calls.

        * config/powerpc/tm-ppc-aix4.h, config/rs6000/tm-rs6000-aix4.h
        (DONT_RELOCATE_SYMFILE_OBJFILE):  Removed.
        * xcoffsolib.h (struct vmap):  Add new members tvma, toffs and dvma,
        remove tadj.
        * exec.c (bfdsec_to_vmap):  Initialize new vmap members, initialize
        tstart and dstart with section VMA.
        * rs6000-nat.c (vmap_symtab):  Relocate relative to the VMA in the
        object file.
        (vmap_ldinfo, xcoff_relocate_core):  Adjust tstart by section offset
        of the text section, remove DONT_RELOCATE_SYMFILE_OBJFILE hack.
        (vmap_exec):  Relocate relative to the VMA in the object file,
        relocate .bss section as well.
        (xcoff_relocate_core):  No longer adjust section addresses by VMA.
        * rs6000-tdep.c (find_toc_address):  Change type of tocbase
        to CORE_ADDR.
        * xcoffread.c (secnum_to_bfd_section):  New routine to get
        BFD section from CS section number.
        (scan_xcoff_symtab):  Make toc_offset section relative.

        * symtab.c (total_number_of_methods):  Avoid core dump if
        baseclass type is still undefined.

Fri Apr 18 17:25:10 1997  Stu Grossman  ([email protected])

        * Makefile.in (SUBDIRS):  Add mswin so that make cleanup cleans up
        that directory.
        * defs.h utils.c (error warning):  Make message be const.
        * main.c (fputs_unfiltered):  Only send gdb_stdout and gdb_stderr
        to hook.  Otherwise send it to fputs.
        * monitor.c monitor.h (monitor_get_dev_name):  New function.  Does
        the obvious.
        * remote-e7000.c:  Remove debugify stuff.  Change printf, fprintf
        to _filtered forms to make output appear in GUIs.  Replace all
        uses of SERIAL_READCHAR with readchar, which has better error
        checking.
        * (e7000_parse_device):  Add prototype.
        (readchar):  Improve doc.  Handle random serial errors.
        (expect):  Disable notice_quit code.  It's busted.  Remove
        serial error handling (it's now handled in readchar).  Remove
        remote_debug echoing.  That's handled in readchar as well.
        (e7000_parse_device):  Remove serial_flag arg.  It's not
        necessary.
        (e7000_open):  Split into two pieces.  Second part is
        e7000_start_remote, and is error protected.  Now, when we connect
        to the target, we setup the initial frame and registers so that
        the user gets an immediate indication of where the target is.
        (gch):  Remove debug output.  That's handled by readchar.
        (e7000_read_inferior_memory):  Handle errors better.
        (_initialize_remote_e7000):  Get rid of `<xxx>' things from
        command names.  They show up when doing completion and confuse
        things horribly.
        * ser-e7kpc.c: Get rid of the DLL's since we can access the device
        directly from Win32s and Win95.  Get rid of debugify crud.
        * serial.c:  Remove debugify cruft.
        * (serial_logchar serial_log_command serial_write serial_readchar
        serial_send_break serial_close):  Merge common functionality into
        serial_logchar.  Clean up rest of routines.
        * sparclet-rom.c:  Disembowel.  Leave only download routine.
        Download routine now switches to remote target automatically.
        * top.c (disconnect):  Only define if SIGHUP is defined.  Cleans
        up MSVC/Win32 problem.
        * utils.c (gdb_flush):  Don't call hook unless it's for gdb_stdout
        or gdb_stderr.
        * config/sh/tm-sh.h:  Define TARGET_SH for WinGDB.
        * config/sparc/tm-sparclet.h:  Remove override for prompt.

Fri Apr 18 13:38:19 1997  Doug Evans  <[email protected]>

        * remote-sim.c (gdbsim_open): Only pass -E to sim_open if
        TARGET_BYTE ORDER_SELECTABLE.

Fri Apr 18 16:52:41 1997  Andrew Cagney  <[email protected]>

        * remote-sim.c (init_callbacks): Initialize poll_quit and magic
        fields of gdb_callback.
        (gdbsim_stop): Add gdbsim_stop to list of supported client
        operations.
        (gdbsim_wait, gdbsim_resume): Move call to sim_resume into
        sim_wait where gdb is in a position to handle a long running
        function.
        (gdbsim_cntrl_c): New function.  Wrap the sim_resume call in a
        SIGINT handler.
        (gdb_os_poll_quit): New function. Check for a quit pending on the
        console.

Thu Apr 17 14:30:04 1997  Per Bothner  <[email protected]>

        * objfiles.c (allocate_objfile):  Allow NULL bfd argument.
start-sanitize-java
        * defs.h (enum language):  Add language_java.
        * java-exp.y, java-lang.c, java-lang.h, java-valprint.c:  New files.
        * Makefile.in:  Update for new files.
        * symfile.c (deduce_language_from_filename):  Recognize .java.
end-sanitize-java

Thu Apr 17 02:20:23 1997  Doug Evans  <[email protected]>

        * m32r-stub.c (stash_registers): Rewrite.
        (restore_registers): Renamed to restore_and_return.
        (cleanup_stash): New function.
        (process_exception): New function.
        (_catchException*): Rewrite.

        * remote-sim.c (gdbsim_load): Update call to sim_load.
        (gdbsim_create_inferior): No longer pass start_address to
        sim_create_inferior.
        (gdbsim_open): Pass endian indicator as arg.

Tue Apr 15 15:31:09 1997  Stan Shebs  <[email protected]>

        * remote.c (get_offsets): Don't use scanf for interpreting
        response to qOffsets.

Tue Apr 15 14:51:04 1997  Ian Lance Taylor  <[email protected]>

        * gdbserver/Makefile.in (INSTALL_XFORM): Remove.
        (INSTALL_XFORM1): Remove.
        (install-only): Use $(program_transform_name) directly, rather
        than using $(INSTALL_XFORM) and $(INSTALL_XFORM1).
        (uninstall): Transform name.

Mon Apr 14 17:06:27 1997  Mark Alexander  <[email protected]>

        * remote-mips.c (mips_load): Ensure that PC gets updated
        after a load on LSI target.

Mon Apr 14 15:54:51 1997  Geoffrey Noer  <[email protected]>

        * procfs.c (notice_signals): fix typo

Mon Apr 14 16:25:10 1997  Ian Lance Taylor  <[email protected]>

        * gdbserver/Makefile.in (INSTALL): Change install.sh to
        install-sh.

Mon Apr 14 11:55:27 1997  Geoffrey Noer  <[email protected]>

        * config/i386/cygwin32.mh: remove -lkernel32 from XM_CLIBS
        since gcc automatically includes it

Thu Apr 10 13:20:53 1997  Geoffrey Noer  <[email protected]>

        * procfs.c: Substantial (but incomplete) changes to support
        sysv4.2mp procfs as implemented in UnixWare 2.1.  The procinfo
        struct now has substructs like struct flt_ctl instead of
        just a fltset_t and has a ctl_fd, status_fd, as_fd, and
        map_fd instead of a single fd.  Non-sysv4.2mp procfs models
        still have the structs and multiple fds, but don't use the
        entire struct and the four fds all point to the same thing.
        We use PROCFS_USE_READ_WRITE to decide whether to talk to
        procfs with reads/writes or use ioctl instead.  We use
        HAVE_MULTIPLE_PROC_FDS to determine whether procfs really has
        multiple fds or not.  PROC_NAME_FMT is split out into
        CTL_PROC_NAME_FMT, AS_PROC_NAME_FMT, MAP_PROC_NAME_FMT, 
        STATUS_PROC_NAME_FMT.
        
        (procfs_notice_signals): now a necessary wrapper around
        (notice_signals): which are the new guts for noticing signals
        (open_proc_file): gets a new flag arg used in sysv4.2mp to
        determine whether or not to attempt to open the ctl_fd.
        (procfs_read_status): new local function, reads procfs status
        (procfs_write_pcwstop): new local function, writes a PCWSTOP
        (procfs_write_pckill): new local function, writes a PCKILL
        (unconditionally_kill_inferior): remove signo since we now
        just call procfs_write_pckill().
        (procfs_xfer_memory): call lseek with SEEK_SET rather than 0    
        (proc_iterate_over_mappings): the whole function is ifdefed
        on UNIXWARE to keep things readable.
        
        Expanded the syscall_table to include new potential sysv4.2mp
        members.  Note that all ifdefs of UNIXWARE should be eliminated
        if possible or renamed to describe what's being selected for a
        bit better.  Sysv4.2mp and IRIX both have SYS_sproc so the
        IRIX specific code now also checks it's not UNIXWARE.

        * config/i386/tm-i386v42mp.h: also define HAVE_PSTATUS_T,
        HAVE_NO_PRRUN_T, PROCFS_USE_READ_WRITE, and UNIXWARE
        * config/mips/nm-irix4.h: set CTL_PROC_NAME_FMT et al to
        "/debug/%d" as PROC_NAME_FMT used to be

Wed Apr  9 11:36:14 1997  Jeffrey A Law  ([email protected])

        * mn10300-tdep.c: Almost completely rewritten based on mn10200
        port.
        * config/mn10300/tm-mn10300.h: Likewise.

Tue Apr  8 10:45:24 1997  Stu Grossman  ([email protected])

        * config/pa/{hppabsd.mt hppahpux.mt hppaosf.mt}:  Remove
        remote-pa.o from TDEPFILES.  Nobody uses it, and besides, it's a
        lousy out-of-date clone of remote.c.

Fri Apr  4 08:21:21 1997  Stu Grossman  ([email protected])

        * remote.c:  Fix problems realized while showering.
        * (hexnumlen):  Add prototype.  Use max, not min.
        * (remote_write_bytes remote_read_bytes):  Fix max packet size
        calculations to properly account for packet overhead.  Also handle
        (probably rare) case where remote_register_buf_size isn't set.

        * remote.c:  Fix doc for `C' and `S' commands to indicate full
        address.
        * (remote_ops extended_remote_ops remote_desc remote_write_size):
        Make static.
        * (remote_fetch_registers remote_write_bytes remote_read_bytes):
        Record size of response to fetch registers command, use this to
        limit size of memory read and write commands.
        * (push_remote_target):  New function to make it possible to have
        another target switch to the remote target.
        * target.h:  Add prototype for push_remote_target.
        * sh-tdep.c (sh_frame_find_saved_regs):  Fix sign extension bugs
        for hosts which default to unsigned chars (such as SGI's).
        * (_initialize_sh_tdep):  Don't set remote_write_size.  It's now
        handled automatically in remote.c.

Thu Apr  3 15:10:30 1997  Michael Snyder  <[email protected]>

        * blockframe.c: blockvector_for_pc_sect(), block_for_pc_sect(), 
        find_pc_sect_function(), find_pc_sect_partial_function(): new 
        functions for debugging overlays; pc without section is ambiguous.
        * breakpoint.[ch]: add section pointer to breakpoint struct;
        add section argument to check_duplicates(); check section as well
        as pc in [breakpoint_here_p(), breakpoint_inserted_here_p(),
        breakpoint_thread_match(), bpstat_stop_status()];  
        add section argument to describe_other_breakpoints(); 
        use INIT_SAL() macro to zero-out new sal structures; 
        make resolve_sal_pc() fix up the sal's section as well as its pc; 
        match on section + pc in clear_command() and delete_breakpoint(); 
        account for overlay sections in insert_breakpoints(), 
        remove_breakpoint() and breakpoint_re_set_one();
        all this to support overlays where a PC is not unique.
        * exec.c: change xfer_memory() to handle overlay sections.
        * findvar.c: change read_var_value() to handle overlay sections.
        * frame.h: declaration for block_for_pc_sect() [blockframe.c].
        * infcmd.c: jump_command() warns against jumping into an overlay
        that's not in memory.  Also use INIT_SAL() to initialize sals.
        * infrun.c: wait_for_inferior() sets a flag to invalidate cached
        overlay state information; Also use INIT_SAL() to init sals.
        * m32r-rom.c: modify load routines to use LMA instead of VMA.
        * m32r-stub.c: mask exit value down to 8 bits; screen out any
        memory read/writes in the range 600000 to a00000, and ff680000
        to ff800000 (hangs because nothing is mapped there); fix strcpy().
        * maint.c: maintenance command "translate-address" supports overlays.
        * minsyms.c: lookup_minimal_symbol_by_pc_sect() supports overlays.
        * objfiles.[ch]: add ovly_mapped field to the obj_section struct;
        this constitutes gdb's internal overlay mapping table.  Add macro
        ALL_OBJSECTIONS() to loop thru the obj_structs and look at overlays.
        Add function find_pc_sect_section().
        * printcmd.c: modify print_address_symbolic() with overlay smarts;
        modify address_info() with overlay smarts; add function sym_info() 
        to support the INFO SYMBOL command (translate address to symbol(s));
        modify disassemble_command() to work on unmapped overlays.
        * source.c: use INIT_SAL() to initialize sals.
        * symfile.[ch]: change generic_load() to use section's LMA address
        instead of VMA address, for overlay sections.
        Add numerous functions for finding a PC's section / overlay, 
        translating between VMA and LMA address ranges, determining if an
        overlay section is mapped, etc.  Add several user commands for
        overlay debugging.  Add support for a "generic" form of automatically
        reading overlay mapping info from the inferior (based on the default
        (simple) overlay manager which Cygnus provides as an example).
        * symtab.[ch]: add functions find_pc_sect_symtab(), 
        find_pc_sect_psymtab(), find_pc_sect_psymbol(), find_pc_sect_line()
        for lookup; modify lookup_symbol and decode_line_1() to use them;
        modify find_function_start_sal() to account for overlay sections;
        add macro INIT_SAL() for initializing struct symtab_and_line.
        * target.c: fix a comment in the declaration of target_ops.

Thu Apr  3 10:31:12 1997  Mark Alexander  <[email protected]>

        * mips-tdep.c (mips_in_call_stub, mips_in_return_stub,
        mips_skip_stub, mips_ignore_helper): New functions for dealing
        with MIPS16 call/return thunks.
        (mips_init_frame_pc_first): New function to implement
        INIT_FRAME_PC_FIRST macro; includes code from old macro plus
        new code to skip over MIPS16 thunks.
        (mips_frame_chain): Skip over MIPS16 thunks.
        * config/mips/tm-mips.h (mips_in_call_stub, mips_in_return_stub,
        mips_skip_stub, mips_ignore_helper): Declare.
        (IN_SOLIB_CALL_TRAMPOLINE, IN_SOLIB_RETURN_TRAMPOLINE,
        SKIP_TRAMPOLINE_CODE, IGNORE_HELPER_CALL): New macros that invoke
        the above functions.
        (INIT_FRAME_PC_FIRST): Change to invoke mips_init_frame_pc.
        (mips_init_frame_pc): Declare.
        * infrun.c (wait_for_inferior): Use new IGNORE_HELPER_CALL macro
        to decide if certain library function calls should be ignored.

Wed Apr  2 14:16:51 1997  Doug Evans  <[email protected]>

        * remote-sim.c (gdbsim_open): Check return code from sim_open.
        Update call to sim_open (new arg SIM_OPEN_DEBUG).

Mon Mar 31 14:55:53 1997  Ian Lance Taylor  <[email protected]>

        * gdbinit.in: New file.
        * .gdbinit: Remove.
        * configure.in: Generate .gdbinit from gdbinit.in.
        * configure: Rebuild.

start-sanitize-tic80
Sun Mar 30 12:28:24 1997  Fred Fish  <[email protected]>

        * config/tic80/tic80.mt: Disable using the simulator
        until it is ready.

end-sanitize-tic80
Sat Mar 29 13:57:20 1997  Fred Fish  <[email protected]>

        * COPYING: Install new version of file from FSF.
        * copying.c (show_copying_command): Update FSF address.

Fri Mar 28 18:33:41 1997  Ian Lance Taylor  <[email protected]>

        * Makefile.in (distclean): Remove .gdbinit.

start-sanitize-tic80
Fri Mar 28 15:37:30 1997  Fred Fish  <[email protected]>

        * config/tic80/tm-tic80.h (NAMES_HAVE_UNDERSCORE): Define.

end-sanitize-tic80
Fri Mar 28 15:38:04 1997  Mike Meissner  <[email protected]>

        * remote-sim.c (gdb_os_{,e}vprintf_filtered): Change stdarg type
        to va_list from void *, since va_list might not be a pointer
        type.

Thu Mar 27 14:21:46 1997  Mark Alexander  <[email protected]>

        * remote-mips.c: Clean up comment and extraneous semicolon
        for mips_monitor_prompt variable.

Thu Mar 27 12:46:58 1997  Mark Alexander  <[email protected]>

        * remote-mips.c: Add `set monitor-prompt' command.

Wed Mar 26 06:47:44 1997  Mark Alexander  <[email protected]>

        Fix from Peter Schauer:
        * mdebugread.c (parse_procedure): Set address of procedure to
        block start; this fixes problems with shared libraries introduced
        by change of Mar 21.

Mon Mar 24 19:43:16 1997  Geoffrey Noer  <[email protected]>

        * symtab.c (find_pc_symtab): change to support the case
        where the objfile is reordered and contains both coff and
        stabs debugging info (continue on if a psymtab isn't found).

Sun Mar 23 16:19:20 1997  Mark Alexander  <[email protected]>

        Fixes from Peter Schauer:
        * config/mips/tm-mips.h (REGISTER_CONVERT_TO_TYPE,
        REGISTER_CONVERT_FROM_TYPE): Swap words if target, not host,
        is big-endian and if registers are 32 bits.
        * mips-tdep.c (mips_print_register, mips_extract_return_value,
        mips_store_return_value): Fix floating-point word-order problems on
        little-endian targets introduced by changes of Mar 21.

Sun Mar 23 15:43:27 1997  Stan Shebs  <[email protected]>

        * remote.c (target_resume_hook, target_wait_loop_hook): New
        globals.
        (remote_resume, remote_wait): Use them.
        * d10v-tdep.c: Set the above hooks.
        (tracesource): New GDB variable, controls source display in
        traces.
        (display_trace): Find and display source line if requested.
        (trace_info): Mention empty trace buffer if appropriate.
        (tdisassemble_command): Robustify argument handling.

        * configure.host: Remove extra bogus Linux case.

Sat Mar 22 16:41:35 1997  Fred Fish  <[email protected]>

        * remote-sim.c (simulator_command): Add comment about dealing with
        NULL or empty args.
start-sanitize-tic80
        * Makefile.in (tic80-tdep.o): Add target.
        * configure.tgt: Add tic80 case.
        * tic80-tdep.c: New file.
        * config/tic80/{tic80.mt, tm-tic80.h}: New files.
end-sanitize-tic80

Sat Mar 22 02:48:11 1997  Peter Schauer  ([email protected])

        * c-exp.y (yylex):  Handle nested template parameter lists.
        * symtab.c (decode_line_2):  Fix test for valid choice number.

Fri Mar 21 19:10:05 1997  Mark Alexander  <[email protected]>

        * mips-tdep.c (mips_push_arguments): On non-EABI architectures,
        copy first two floating point arguments to general registers, so that
        MIPS16 functions will receive the arguments correctly.
        (mips_print_register): Print double registers correctly on
        little-endian hosts.
        (mips_extract_return_value): Return double values correctly
        on little-endian hosts.

        * mdebugread.c (parse_procedure): Adjust address of procedure relative
        to address in file descriptor record; this accounts for constant
        strings that may precede functions in the text section.  Remove
        now-useless lowest_pdr_addr from argument list and all calls.

Fri Mar 21 15:36:25 1997  Michael Meissner  <[email protected]>

        * configure.tgt (powerpc*-{eabi,linux,sysv,elf}*): Determine
        whether the simulator will be built by whether the Makefile in the
        simulator directory was built.

        * configure.in (--enable-sim-powerpc): Delete switch.
        * configure: Regenerate.

Thu Mar 20 20:52:04 1997  Jeffrey A Law  ([email protected])

        * mn10200-tdep.c (mn10200_analyze_prologue): Look for save of "a1"
        in the prologue too.

        * remote-sim.c (gdb_os_vprintf_filtered): Fix to work with non-ANSI
        compilers.
        (gdb_os_evprintf_filtered): Similarly.
        
Wed Mar 19 16:13:22 1997  Geoffrey Noer  <[email protected]>

        New UnixWare 2.1 configuration
        * config/i386/i386v42mp.mt: new
        * config/i386/i386v42mp.mh: new
        * config/i386/tm-i386v42mp.h: new
        * config/i386/nm-i386v42mp.h: new
        * configure.tgt: added new entries
        * configure.host: added new entries

Mon Mar 17 17:52:00 1997  J.T. Conklin  <[email protected]>

        * dsrec.c (load_srec): Print leading zeroes when printing section
        addresses.

Mon Mar 17 15:00:16 1997  Andrew Cagney  <[email protected]>

        * remote-sim.h: Delete - moved to ../include/remote-sim.h.
        
        * Makefile.in (remote_utils_h): Update path to remote-sim.h.

Fri Mar  7 20:55:28 1997  Andrew Cagney  <[email protected]>

        * remote-sim.c (flush_stdout, write_stderr, flush_stderr,
        vprintf_filtered, evprintf_filtered): Callbacks that accept
        varargs.
        
Sat Mar 15 00:50:46 1997  Peter Schauer  ([email protected])

        * breakpoint.c (insert_breakpoints, watchpoint_check,
        bpstat_stop_status):  Do not disable watchpoints going out of scope.
        (insert_breakpoints):  Make sure that the current frame is valid
        before calling find_frame_addr_in_frame_chain.

        * top.c (setup_user_args):  Handle quotes and backslashes.
        (print_gdb_version):  Update copyright year.

Fri Mar 14 15:44:03 1997  Ian Lance Taylor  <[email protected]>

        * Makefile.in (elfread.o): Depend upon elf-bfd.h and elf/mips.h.

Thu Mar 13 22:51:00 1997  Dawn Perchik  <[email protected]>

        * utils.c (pollquit, notice_quit): If _WIN32, limit test for
        cntl-C to wingdb.
        (initialize_utils): If _WIN32, don't call ScreenRows and ScreenCols 
        except under wingdb.  (Contributed by Martin Hunt).

Thu Mar 13 12:40:49 1997  Tom Tromey  <[email protected]>

        * configure: Regenerated.
        * configure.in: Run AC_CONFIG_AUX_DIR before AC_CANONICAL_SYSTEM.

Thu Mar 13 11:00:22 1997  Doug Evans  <[email protected]>

        * remote-sim.h (sim_state, SIM_DESC): New types.
        (sim_open): Return a `descriptor' as result.
        (*): New argument of descriptor result from sim_open.
        * remote-sim.c (gdbsim_desc): Renamed from gdbsim_open_p.
        (gdbsim_open): Record result of sim_open in gdbsim_desc.
        Pass argv list to sim_open, argv[0] = pseudo program name.
        (*): Pass gdbsim_desc to sim_foo fns.

Wed Mar 12 14:40:06 1997  Tom Tromey  <[email protected]>

        * config.in: Regenerated.

        * acconfig.h (START_INFERIOR_TRAPS_EXPECTED, sys_quotactl,
        HAVE_HPUX_THREAD_SUPPORT): Define.

Tue Mar 11 07:25:27 1997  Mark Alexander  <[email protected]>

        First cut at supporting simulators in gdbserver:

        * configure, configure.in: Allow gdbserver to be configured
        for cross-target environments.
        * gdbserver/Makefile.in: Add simulator support.
        * gdbserver/configure.in: Eliminate assumption that host == target.
        Simplify using gdb/configure.tgt and gdb/configure.host.
        Fix other minor configuration errors.
        * gdbserver/low-sparc.c: Fix compile error.
        * gdbserver/remote-utils.c: Eliminate assumption that registers
        and addresses are four bytes.  Fix minor compile errors and warnings.
        * gdbserver/server.c: Rewrite numerous instances of identical code
        for starting inferior processes to call new function start_inferior.
        Eliminate assumption that registers and addresses are four bytes.
        * gdbserver/server.h: Add missing prototypes to eliminate compiler
        warnings.
        * gdbserver/low-sim.c: New file to mate gdbserver with simulators.
        * config/mips/vr5000.mt: Add Vr5000 simulator support to gdbserver.
        * config/i386/linux.mh: Eliminate gdbserver support as a first step
        in moving such support from host to target makefile fragments.
        * config/i386/linux.mt: Move gdbserver support here from linux.mh.

Mon Mar 10 12:27:47 1997  Michael Snyder  <[email protected]>

        * symtab.h (INIT_SAL): New macro to initialize symtab_and_line, 
        to insure consistant initialization of unused fields to zero.
        * symtab.c: replace initializations of sals with new macro INIT_SAL.
        * breakpoint.c: ditto.
        * infrun.c: ditto.
        * infcmd.c: ditto.
        * source.c: add call to INIT_SAL macro.

Sat Mar  8 00:16:37 1997  Peter Schauer  ([email protected])

        * sparc-tdep.c (isbranch):  Always handle v9 branch instructions,
        they might get used on 32 bit targets as well.

Wed Mar  5 19:34:09 1997  Bob Manson  <[email protected]>

        * remote-mips.c (mips_exit_debug): Some IDT boards don't
        send the full exit string.

Wed Mar  5 12:59:27 1997  Jeffrey A Law  ([email protected])

        * mn10200-tdep.c (mn10200_push_arguments): Handle new calling
        conventions.
        (mn10200_store_struct_return): Likewise.

Tue Mar  4 10:31:02 1997  Mark Alexander  <[email protected]>

        * mips-tdep.c (mips_fetch_instruction): New function; replace
        common code throughout with calls to it.
        (mips_find_saved_regs): Examine MIPS16 entry instruction to determine
        correct saved addresses of $s0 and $s1.
        (mips_find_saved_regs, mips16_heuristic_proc_desc):  Use MIPS_REGSIZE
        instead of hardcoded 4.
        (mips16_skip_prologue): Handle extended instructions correctly.

Mon Mar  3 12:29:20 1997  Doug Evans  <[email protected]>

        * defs.h (LONGEST): Move #ifndef LONGEST to outside.
        Try BFD_HOST_64_BIT if ! CC_HAS_LONG_LONG.

Thu Feb 27 18:54:11 1997  Mark Alexander  <[email protected]>

        * mips-tdep.c (IS_MIPS16_ADDR, MAKE_MIPS16_ADDR, UNMAKE_MIPS16_ADDR):
        New macros for testing, setting, and clearing bit 0 of addresses.
        Change numerous bits of code where bit 0 was being manipulated
        to use these macros.

Thu Feb 27 14:12:41 1997  Mark Alexander  <[email protected]>

        * remote-mips.c: Put back the form feeds.

Thu Feb 27 12:04:24 1997  Mark Alexander  <[email protected]>

        * remote-mips.c: Remove form feeds (^L) from source.
        (mips_initialize): LSI PMON doesn't support 'set regsize' command.
        (pmon_wait): Don't need to exit and re-enter debug mode on LSI
        PMON after a continue; it causes target program misbehavior.
        (mips_fetch_register): Don't fetch unsupported registers; this
        cuts down on wasted serial traffic.

Thu Feb 27 09:38:16 1997  Stu Grossman  ([email protected])

        * configure.in configure (HPUX/OSF thread support):  Enable this
        only when running GCC, since HP's thread header files use ANSI C
        which is not supported by their default compiler.

        * configure.host (i[3456]86-*-windows):  Disable long long
        support for WinGDB.  Add mswin to configdirs.
        * configure.in configure:  Move calls to configure.host and
        configure.tgt to the top of configure.in to allow them to set
        config variables before they are referenced.

Tue Feb 25 20:21:52 1997  Stan Shebs  <[email protected]>

        * configure.tgt (mips*-*-lnews*): New target.

Mon Feb 24 16:35:00 1997  Jeffrey A Law  ([email protected])

        * mn10200-tdep.c (mn10200_analyze_prologue): Don't fix fi->frame
        if we're not the innermost frame.  Fix minor typos.

Sat Feb 22 03:39:50 1997  Peter Schauer  ([email protected])

        * stabsread.c (read_type):  Fix handling of template names
        with template parameters containing `::'.

        * valops.c (search_struct_field, search_struct_method):
        Pass correct valaddr parameter to baseclass_offset.
        Prevent gdb crashes by making sure that the virtual base pointer
        from an user object still points to accessible memory.

Tue Feb 18 13:36:34 1997  Mark Alexander  <[email protected]>

        * maint.c: Eliminate -Wall warnings by including some header files.

Tue Feb 18 13:06:30 1997  Mark Alexander  <[email protected]>

        * remote-sim.c (init_callbacks): Undo previous change.

Tue Feb 18 11:13:00 1997  Dawn Perchik  <[email protected]>

        * maint.c: Fix dereference of pointer.
        * remote-sim.c: Fix reference of structure member "last_error".
        * debugify.c: Include config.h to get ANSI definitions.

Sat Feb 15 17:43:46 1997  Stu Grossman  ([email protected])

        * remote-vx.c (vx_attach): Remove code added by kung.  It made no
        sense.

Fri Feb 14 13:00:07 1997  Ian Lance Taylor  <[email protected]>

        * main.c (print_gdb_help): Make static to match declaration.

Thu Feb 13 18:18:18 1997  Dawn Perchik  <[email protected]>

        * remote-e7000.c, ser-e7kpc.c, serial.c: Remove // comments.

Wed Feb 12 15:58:00 1997  Dawn Perchik  <[email protected]>

        * debugify.c, debugify.h: Make safe for non-ansi compilers.

Wed Feb 12 15:30:00 1997  Dawn Perchik  <[email protected]>

        * defs.h: Fix prototypes for new cleanup functions.

Wed Feb 12 15:08:47 1997  Dawn Perchik  <[email protected]>

        * debugify.c, debugify.h: Fix for general gnu use.  Remove C++ 
        comment, add PARAMS, add license info and fix indentation.

Wed Feb 12 14:42:47 1997  Dawn Perchik  <[email protected]>

        * debugify.c, debugify.h: New files.  Provide common macros
        for writing debug info to a log file or stdio.

Wed Feb 12 02:44:39 1997  Dawn Perchik  <[email protected]>

        * c-valprint.c (c_val_print): Fix printing for arrays defined
        with 0 length.

Tue Feb 11 22:24:39 1997  Dawn Perchik  <[email protected]>

        * defs.h: Fix cntl-C to read from the Windows message queue.
        Add prototypes for make_final_cleanup (and the other cleanup
        routines.
        * remote-e7000.c: Fix sync code to timeout if unable to sync.
        Change sync code to report status while trying to sync-up 
        with hardware.  Add debugging output and document.
        * ser-e7kpc.c: Swap order of len & offset to match implementation.
        Add debugging output and document.
        * serial.c: Add debugging output.
        * top.c: Add call to do_final_cleanups.
        Remove conditionals preventing Win32 from getting SIGQUIT.
        * utils.c: (*_cleanup): Modify cleanup routines to accept a cleanup
        chain as a parameter.  Extract this generic code from the cleanup 
        routines into separate funtions (*_my_cleanup).  Keep old 
        functionality by passing "cleanup_chain" to the new funtions.  
        Define the cleanup chain "final_cleanup_chain" to be a cleanup 
        chain which will be executed only when gdb exits.  Add functions 
        (*_final_cleanup) to match the original (*_cleanup) functions.
        (pollquit, quit, notice_quit): Fix to read cntl-C from the 
        Windows message queue.

Tue Feb 11 15:36:31 1997  Doug Evans  <[email protected]>

        * m32r-rom.c: #include <sys/types.h>.
        #ifdef out new load support if wingdb.
        * m32r/tm-m32r.h (TARGET_M32R): Define, for wingdb.

Tue Feb 11 12:28:09 1997  Jeffrey A Law  ([email protected])


        * config/mn10200/tm-mn10200.h (STORE_STRUCT_RETURN): Fix.
        * mn10200-tdep.c (mn10200_store_struct_return): New function.

        * config/mn10200/tm-mn10200.h (EXTRACT_RETURN_VALUE): Fix case when
        extracting a return value from a register pair.

        * mn10200-tdep.c (mn10200_push_arguments): Stack only needs to
        be two byte aligned.  Round argument sizes up to two byte boundary.
        Write out args in two byte hunks.
        (mn10200_push_return_address): Implement.
        * config/mn10200/tm-mn10200.h (EXTRACT_RETURN_VALUE): Abort for
        structures > 8 bytes (temporary).
        (STORE_RETURN_VALUE): Likewise.
        (CALL_DUMMY): No longer undefine.
        (USE_STRUCT_CONVENTION): Use for args > 8 bytes.
        (REG_STRUCT_HAS_ADDR): Define.
        
start-sanitize-r5900
Fri Feb 07 09:04:37 1997  Gavin Koch  <[email protected]>
        
        * configure.tgt: added r5900.
        
end-sanitize-r5900
Mon Feb 10 18:35:55 1997  Mark Alexander  <[email protected]>

        * mips-tdep.c (non_heuristic_proc_desc): New function.
        (find_proc_desc): Move non-heuristic proc search code into separate
        function.
        (gdb_print_insn_mips): Use non-heuristic method to find procedure
        descriptor, to avoid prologue examination when disassembling.
        * remote-mips.c: Add support for new "lsi" target (LSI MiniRISC
        aka MicroMeteor board).
        (mips_exit_debug): Prevent protocol reinitialization if an error
        occurs while exiting debug mode.

Mon Feb 10 16:11:57 1997  Jeffrey A Law  ([email protected])

        * mn10200-tdep.c: Remove lots of debugging printfs, update/improve
        comments, formatting, etc.  Plus other minor fixes for problems
        I found during my first pass over the mn10200 port.
        (mn10200_analyze_prologue): New function.
        (mn10200_frame_chain, mn10200_init_extra_frame_info): Use it.
        * config/mn10200/tm-mn10200.h: Lots of updates/improvements to
        comments, formatting, etc.  Minor fixes for problems I found during
        my first pass over the mn10200 port.
        (TARGET_*_BIT): Define appropriately for ints, long longs, doubles and
        pointers.
        (REGISTER_VIRTUAL_TYPE): Define as a long.
        (EXTRACT_RETURN_VALUE): Rework to deal with long ints living
        in register pairs.
        (STORE_RETURN_VALUE): Similarly.

        * blockframe.c (generic_get_saved_regs): Remove unused variable
        "addr".
        * breakpoint.c (frame_in_dummy): Move struct breakpoint *b decl
        inside #ifdef CALL_DUMMY.
        (watch_command_1): Initialize target_resources_ok.
        * command.c (do_setshow_command): Provide dummy initialization
        for "match".
        * valops.c (find_function_addr): Move function & prototype inside
        #ifdef CALL_DUMMY.
        (value_arg_coerce): Similarly.
        (value_of_variable): Provide dummy initialization of "frame".

Mon Feb 10 07:54:26 1997  Fred Fish  <[email protected]>

        * xcoffread.c (RECORD_MINIMAL_SYMBOL): Add NULL asection* parameter
        to prim_record_minimal_symbol_and_info call that was missed in Jan 3
        change.
        (scan_xcoff_symtab): Ditto.

Sun Feb 09 09:23:26 1997  Mark Alexander  <[email protected]>

        * remote-mips.c (common_breakpoint): Prevent 64-bit addresses
        from being sent to 32-bit targets by masking off upper bits.
        * mips-tdep.c (heuristic_proc_start): Mask off upper 32 bits
        of PC on 32-bit targets.
        (mips16_heuristic_proc_desc): Recognize 'addiu s1,sp,n' as a
        frame setup instruction.
        (mips32_heuristic_proc_desc): Fix warning found by gcc -Wall.
        (mips16_skip_prologue): Recognize 'addiu s1,sp,n' as a valid
        prologue instruction.  Fix warnings and bugs found by gcc -Wall.
        * buildsym.c (finish_block): Improve handling of overlapping blocks;
        fixes problem on MIPS16 printing function arguments.

Sat Feb  8 01:14:43 1997  Peter Schauer  ([email protected])

        * dwarf2read.c (dwarf2_linkage_name):  New function to get
        the linkage name of a die from DW_AT_MIPS_linkage_name or
        DW_AT_name.
        (read_func_scope, dwarf2_add_field, dwarf2_add_member_fn,
        new_symbol):  Use it instead of accessing DW_AT_name.
        (read_partial_die):  Use DW_AT_MIPS_linkage name as name of the
        partial die if present.
        (dwarf2_add_member_fn):  Make a copy of physname on the type obstack.

Fri Feb  7 10:06:22 1997  Jeffrey A Law  ([email protected])

        * blockframe.c (generic_frame_chain_valid): If the new frame
        is not INNER_THAN the old frame, then it's not valid.

Tue Feb 04 09:04:37 1997  Mark Alexander  <[email protected]>

        * mips-tdep.c (mips16_get_imm): Fix calculation of extended immediate.
        (mips16_heuristic_proc_desc): Recognize jal(x) instruction.

Mon Feb 03 17:57:58 1997  Mark Alexander  <[email protected]>

        * mips-tdep.c (mips16_decode_reg_save): Distinguish between
        sd and sw instructions correctly.
        (heuristic_proc_start): Add support for MIPS16.
        (mips16_get_imm, mips16_heuristic_proc_desc,
        mips32_heuristic_proc_desc): New helper functions for
        heuristic_proc_desc.
        (heuristic_proc_desc): Rewrite and reorganize to support MIPS16.
        (mips_push_arguments): Don't align small arguments in EABI.
        (mips32_skip_prologue): Attempt to shrink code size a little.

Mon Feb  3 11:06:05 1997  Michael Snyder  <[email protected]>

        * m32r-stub.c: New -- remote protocol support for M32R cpu.
        * m32r-rom.c:  Several experiments with improved download time.

Fri Jan 31 08:26:39 1997  Mark Alexander  <[email protected]>

        * mips-tdep.c (MIPS16_INSTLEN): Define.
        (mips_find_saved_regs): Replace hardcoded 2's with MIPS16_INSTLEN.
        (heuristic_proc_start): Recognize 'entry' pseudo-op as a start
        of function on MIPS16.
        (mips32_skip_prologue, mips16_skip_prologue): New helper functions
        for mips_skip_prologue.
        (mips_skip_prologue): Recognize both 16- and 32-bit prologues.

Wed Jan 29 12:45:54 1997  Michael Meissner  <[email protected]>

        * config/powerpc/ppc{,le}-sim.mt (SIM): Remove the library
        ../sim/common/libcommon.a.

Tue Jan 28 15:54:13 1997  Michael Snyder  <[email protected]>

        * blockframe.c: fix a null pointer ref in generic_get_saved_register

Tue Jan 28 15:39:50 1997  Geoffrey Noer  <[email protected]>

        * mn10200-tdep.c (mn10200_frame_chain): Get basic backtracing
        working.

Mon Jan 27 14:31:52 1997  Mark Alexander  <[email protected]>

First set of changes for mips16:
        * config/mips/tm-mips.h (MIPS16_BIG_BREAKPOINT,
        MIPS16_LITTLE_BREAKPOINT, BREAKPOINT_FROM_PC): Define.
        (ABOUT_TO_RETURN): Call new function mips_about_to_return.
        (mips_breakpoint_from_pc, mips_about_to_return): Declare.
        * mem-break.c (memory_breakpoint_from_pc): New function.
        (memory_insert_breakpoint, memory_remove_breakpoint): Use
        memory_breakpoint_from_pc to determine breakpoint contents and size.
        * target.h (memory_breakpoint_from_pc): Declare.
        * monitor.c (monitor_insert_breakpoint): Use memory_breakpoint_from_pc
        to determine size of breakpoint instruction.
        * mips-tdep.c (mips32_decode_reg_save, mips16_decode_reg_save):
        New helper functions for mips_find_saved_regs.
        (mips_find_saved_regs): Recognize mips16 prologues.
        (mips_addr_bits_remove): Strip off upper 32 bits of address
        when target CPU is 32 bits but CORE_ADDR is 64 bits.
        (mips_step_skips_delay): No branch delay slot on mips16.
        (gdb_print_insn_mips): Disassemble mips16 code.
        (mips_breakpoint_from_pc, mips_about_to_return): New functions.

Mon Jan 27 10:34:03 1997  Jeffrey A Law  ([email protected])

        * tm-mn10200.h (NUM_REGS): Decrease to 12.
        (REGISTER_NAMES): Elimination registers not found on the mn10200.
        (PC_REGNUM, MDR_REGNUM, PSW_REGNUM): Corresponding changes.
        (LIR_REGNUM, LAR_REGNUM): Delete.  They don't exist on the mn10200.

Sat Jan 25 00:07:59 1997  Peter Schauer  ([email protected])

        * dwarf2read.c:  Replace integral tag, name and form fields in
        internal structure definitions with the corresponding enumeration
        types from dwarf2.h. Add default cases to switches on enumerations
        where appropriate.
        Make quoting of string arguments in complaint messages consistent.
        Check for NULL returns from DW_STRING.
        (struct partial_die_info):  Add sibling and has_type fields, remove
        unused value field.
        (DW_*):  Move access macro definitions near the definition of the
        attribute structure.
        (struct field_info):  New structure to pass information about fields
        and member functions between die processing routines.
        (dwarf2_build_psymtabs_hard):  Set cu_header_offset.
        (scan_partial_symbols):  Do not enter DW_TAG_subprogram dies into
        the partial symbol table if the DW_AT_*_pc attributes are missing.
        Add file scope base type definitions to the partial symbol table.
        Skip over child dies if the die has a sibling attribute.
        (add_partial_symbol):  Enter global variables with type attributes
        and without location descriptors into the partial symbol table.
        Store value of DW_TAG_variable dies in the partial symbol table.
        Do not enter global variables into the minimal symbol table.
        Add base type definitions to the partial symbol table.
        (psymtab_to_symtab_1):  Use dwarf2_get_pc_bounds to determine highpc.
        (process_die):  Move check for DW_AT_low_pc to read_func_scope.
        Add a typedef symbol for base type definitions to the symbol table.
        Ignore DW_TAG_inlined_subroutine tags for now.
        (read_file_scope):  Use dwarf2_get_pc_bounds to determine pc bounds.
        (read_func_scope, read_lexical_block_scope):  Use dwarf2_get_pc_bounds
        to determine pc bounds, ignore dies with invalid bounds.
        (dwarf2_get_pc_bounds):  New routine to extract and validate the
        DW_AT_*_pc attributes of a die.
        (dwarf2_add_field, dwarf2_attach_fields_to_type, skip_member_fn_name,
        dwarf2_add_member_fn, dwarf2_attach_fn_fields_to_type):
        New functions to handle fields and member functions.
        (read_structure_scope):  Rewritten to use them.
        (read_array_type):  Renamed from dwarf_read_array_type.
        Default upper array bound to describe an array with unspecified
        length.
        Create array types in backwards order, as dwarf2 puts out the array
        dimensions from left to right.
        (read_subroutine_type):  Handle DW_TAG_unspecified_parameters,
        DW_AT_artificial and DW_AT_prototyped.
        (read_base_type):  Make an unsigned type for DW_ATE_boolean.
        Pass objfile to dwarf_base_type.
        (read_partial_die):  Use read_attribute to read in the attributes.
        Handle DW_AT_sibling and DW_AT_type.
        Follow references when determining DW_AT_name and DW_AT_external
        attributes of the die.
        Validate DW_AT_*_pc attributes.
        (read_full_die):  Use read_attribute to read in the attributes.
        (read_attribute):  New function to read an attribute described
        by an abbreviated attribute.
        (new_symbol):  Relocate symbol value for DW_TAG_label with baseaddr.
        Do not set SYMBOL_VALUE_ADDRESS for DW_TAG_subprogram,
        SYMBOL_BLOCK_VALUE for the symbol will be set later by finish_block.
        Change symbol class for global variables with a zero valued location
        descriptor to LOC_UNRESOLVED.
        Handle DW_AT_const_value attributes for DW_TAG_variable,
        DW_TAG_formal_parameter and DW_TAG_enumerator.
        Build a typedef symbol for DW_TAG_base_type.
        (dwarf2_const_value):  New routine to copy a constant value from an
        attribute to a symbol.
        (dwarf_base_type):  Use passed in objfile, not current_objfile
        when calling dwarf2_fundamental_type.
        (dump_die):  Use DW_* accessor macros to access values of attributes.
        (decode_locdesc):  Handle DW_OP_plus_uconst.

Wed Jan 22 01:31:16 1997  Geoffrey Noer  <[email protected]>

        * mn10200-tdep.c: New file.
        * config/mn10200/tm-mn10200.h: New, REGISTER_SIZE is 24 bits not 32,
        SP_REGNUM and FP_REGNUM are different, also no lar or lir.
        * config/mn10200/mn10200.mt: New file.
        * configure.tgt: add mn10200 entry.

Tue Jan 21 18:32:23 1997  Stu Grossman  ([email protected])

        * configure.in configure:  Check if host has libdl if doing
        Solaris threads.

Tue Jan 21 17:03:26 1997  Geoffrey Noer  <[email protected]>

        * mn10300-tdep.c: Wrote/fixed implementations of
        mn10300_frame_chain, mn10300_init_extra_frame_info,
        mn10300_frame_saved_pc
        * config/mn10300/tm-mn10300.h: Redefine INIT_EXTRA_FRAME_INFO
        and INIT_FRAME_PC macros.

Tue Jan 21 17:01:20 1997  Stu Grossman  ([email protected])

        * configure.in configure:  Check if host has libm.  Make sure we
        are using gcc when using the -export-dynamic option.  Fixes a
        problem with building under Solaris/SunPro cc.

Mon Jan 20 13:52:13 1997  Mark Alexander  <[email protected]>

        * config/mips/{embed,embed64,embedl,embedl64}.mt:
        Link in simulator on MIPS embedded targets.

Sat Jan 18 02:31:29 1997  Peter Schauer  ([email protected])

        * blockframe.c (frameless_look_for_prologue):  Mark frames
        with a zero PC as frameless to improve backtraces from core dumps
        caused by dereferencing a NULL function pointer.

Thu Jan 16 14:10:41 1997  Geoffrey Noer  <[email protected]>

        * config/mn10300/tm-mn10300.h: fix BREAKPOINT definition.

Tue Jan 14 16:01:06 1997  Geoffrey Noer  <[email protected]>

        * mn10300-tdep.c: made a lot more generic, ripping out code
        from copied target (no more mn10300_scan_prologue,
        init_extra_frame_info, and mn10300_fix_call_dummy calls)
        * config/mn10300/tm-mn10300.h: undefine INIT_EXTRA_FRAME_INFO
        and INIT_FRAME_PC macros

Thu Jan  9 11:44:40 1997  Michael Snyder  <[email protected]>

        * sparc-tdep.c (sparc_frame_find_saved_regs): Don't use 
        FP_REGISTER_BYTES to compute offsets into the saved frame, 
        since it fails for SPARC targets configured without any
        FP regs.  Instead, use DUMMY_STACK_REG_BUF_SIZE.  

Mon Jan  6 11:15:14 1997  Stu Grossman  ([email protected])

        * symtab.c (fixup_symbol_section):  Handle NULL symbols without
        crashing.

Fri Jan  3 12:08:16 1997  Stu Grossman  ([email protected])

        * Makefile.in configure configure.in:  Remove ENABLE_CLIBS,
        ENABLE_OBS, and THREAD_DB_OBS.  These are consolidated into LIBS
        and CONFIG_OBS.
        * configure configure.in:  Clean up test cases around thread support.
        * configure.tgt (v850-*-*):  Include v850ice.o and v850.lib if
        host is Windows.
        * c-valprint.c ch-valprint.c cp-valprint.c eval.c expprint.c
        printcmd.c valops.c value.h values.c:  Add bfd_section arg to
        value_at and value_at_lazy.
        * coffread.c dbxread.c elfread.c mdebugread.c minsyms.c symtab.h:
        Add bfd_section arg to prim_record_minimal_symbol_and_info.
        * corefile.c gdbcore.h printcmd.c valops.c:  Use read_memory_section
        instead of read_memory.  It takes a bfd_section arg.
        * coffread.c dbxread.c elfread.c gdb-stabs.h objfiles.h:  Remove
        unnecessary cast for assignment of struct dbx_symfile_info.
        Struct objfile now uses a real pointer instead of PTR for this
        element.
        * dbxread.c (dbx_symfile_init): Stash bfd section pointers for
        text, data and bss into dbx_symfile_info.
        * exec.c (xfer_memory):  Handle transfers for user-specified
        sections.
        * findvar.c (read_var_value locate_var_value):  Copy bfd section
        from the symbol to the value.
        * gdb-stabs.h:  Add section pointers for text, data and bss
        sections.
        * maint.c (translate address command):  Add test code for overlay
        address translation.
        * printcmd.c (do_examine do_one_display):  Now takes a bfd section
        arg.
        * (print_formatted x_command):  Record current section along with
        current address for repeated commands.
        * sparc-nat.c (fetch_inferior_registers):  Change
        target_xfer_memory to target_{read write}_memory to allow changes
        to target_xfer_memory interface for section info.
        * symmisc.c (dump_msymbols print_symbol):  Print section
        assocaited with symbol.
        * symtab.c (fixup_symbol_section):  New routine to
        add section info to symbols returned by lookup_symbol.
        * symtab.h (struct general_symbol_info):  Add bfd section to
        symbols.
        * target.c target.h (target_xfer_memory):  Add bfd section to
        args.
        * (target_read_memory_section):  New routine to read data from a
        specific section.
        * (target_memory_bfd_section):  New global variable to pass bfd
        section in to targets.
        * valarith.c (value_add value_addr value_array):  Preserve bfd
        section when computing new value.
        * value.h (struct value):  Add bfd section to values.
        * values.c (allocate_value value_copy):  Initialize/preserve bfd
        section.
        * (unpack_double):  Clean up _MSC_VER conditionals to remove
        duplicate code.
        * v850ice.c:  New module to support communication with NEC's
        PC-based ICE.
        * config/v850/tm-v850.h (REGISTER_NAMES):  Replace sp, gp, fp, and
        ep names with rxx names.  sp and fp are renamed via a different
        mechanism.

Fri Jan  3 14:20:05 1997  Geoffrey Noer  <[email protected]>

        * mn10300-tdep.c (mn10300_push_arguments): rewrote,
        also removed code elsewhere that made use of RP_REGNUM.
        * config/mn10300/tm-mn10300.h: ripped out RP_REGNUM, V0_REGNUM,
        ARG0_REGNUM, ARGLAST_REGNUM (all not appropriate for mn10300
        arch.), redefined SAVED_PC_AFTER_CALL, EXTRACT_RETURN_VALUE,
        EXTRACT_STRUCT_VALUE_ADDRESS, STORE_RETURN_VALUE.

For older changes see ChangeLog-96
\f
Local Variables:
mode: indented-text
left-margin: 8
fill-column: 74
version-control: never
End: