* infrun.c (IN_SOLIB_TRAMPOLINE): Correct comment, trampolines

[binutils.git] / gdb / ChangeLog

Thu Apr  7 17:25:21 1994  Peter Schauer  ([email protected])
                          Jim Kingdon  ([email protected])

        * infrun.c (IN_SOLIB_TRAMPOLINE):  Correct comment, trampolines
        are in the .plt section.
        * minsyms.c (lookup_solib_trampoline_symbol_by_pc,
        find_solib_trampoline_target):  New functions for handling
        stepping into -g compiled shared libraries.
        * symtab.h (lookup_solib_trampoline_symbol_by_pc,
        find_solib_trampoline_target):  Add prototypes.
        * config/tm-sunos.h (IN_SOLIB_TRAMPOLINE, SKIP_TRAMPOLINE_CODE):
        Define to handle stepping into  -g compiled shared libraries.
        * config/tm-sysv4.h (SKIP_TRAMPOLINE_CODE):  Define to handle
        stepping into  -g compiled shared libraries.

Thu Apr  7 17:22:54 1994  Peter Schauer  ([email protected])

        * configure.in:  Add mips-*-sysv4* support.
        * config/mips/mipsv4.mh, config/mips/mipsv4.mt,
        config/mips/tm-mipsv4.h, config/mips/xm-mipsv4.h, mipsv4-nat.c:
        New files for MIPS SVR4 support.
        * Makefile.in:  Update for new mipsv4 files.
        * alpha-tdep.c (heuristic_proc_desc, find_proc_desc):  Use
        read_next_frame_reg to obtain the frame relative stack pointer.
        * mips-tdep.c (heuristic_proc_desc):  Use read_next_frame_reg to
        obtain the frame relative stack pointer.
        * mdebugread.c (parse_partial_symbols, psymtab_to_symtab1):
        Handle stStatic and stStaticProc symbols in stabs-in-ecoff output
        by entering them into the minimal symbol table.
        * printcmd.c (print_scalar_formatted):  Do not try to unpack to
        a long for float formats.
        * solib.c:  Include "elf/mips.h" only if DT_MIPS_RLD_MAP does not
        get defined in <link.h>.
        * solib.c (solib_add):  Add shared library sections to the section
        table of the target before adding the symbols.
        * partial-stab.h:  Relocate static and global functions.
        * dbxread.c (read_dbx_symtab):  Remove unused variable
        end_of_text_address.  Relocate text_addr when passing it
        to end_psymtab.

        For Alpha OSF/1 targets, enable gdb to set breakpoints in shared
        library functions before the executable is run. Retrieve dynamic
        symbols from stripped executables.
        * mipsread.c (read_alphacoff_dynamic_symtab):  New function.
        * mipsread.c (mipscoff_symfile_read):  Use it. Issue warning message
        if no debugging symbols were found.
        * alpha-tdep.c (alpha_skip_prologue):  Silently return the unaltered
        pc if memory at the pc is not accessible and GDB_TARGET_HAS_SHARED_LIBS
        is defined.
        * config/alpha/nm-alpha.h (GDB_TARGET_HAS_SHARED_LIBS):  Define,
        OSF/1 has shared libraries.

Thu Apr  7 15:11:11 1994  Ian Lance Taylor  ([email protected])

        * dbxread.c (read_dbx_dynamic_symtab): Adjust for recent changes
        to BFD handling of dynamic symbols.

Tue Apr  5 15:29:25 1994  Jeffrey A. Law  ([email protected])

        * hppa-tdep.c (hppa_fix_call_dummy): If FUN is a procedure label,
        then gets its real address into FUN and its GOT/DP value into %r19.

        * tm-hppa.h (CALL_DUMMY): Use %r20, not %r19 as a temporary.

        * hppa-tdep.c (frameless_function_invocation): If no unwind
        descriptor was found, then assume this was not a frameless
        function invocation.
        (frame_saved_pc): If the saved PC is in a linker stub, then
        return the return address which the linker stub will return to.

        * xm-hppab.h: Never define USG.
        * xm-hppah.h: Always define USG.

Tue Apr  5 12:58:47 1994  Per Bothner  ([email protected])

        * values.c (unpack_long, value_from_longest),
        valarith.c (value_binop):  Allow TYPE_CODE_RANGE.

Fri Apr  1 14:04:34 1994  Jason Merrill  ([email protected])

        * symfile.c (deduce_language_from_filename): .cpp is a C++ extension.

Fri Apr  1 00:44:00 1994  Peter Schauer  ([email protected])

        For SVR4 targets, enable gdb to set breakpoints in shared
        library functions before the executable is run.
        * elfread.c (elf_symtab_read):  Handle symbols for shared library
        functions.
        * sparc-tdep.c (in_solib_trampoline):  Renamed to in_plt_section
        and moved to objfiles.c.
        * objfiles.c (in_plt_section):  Moved to here from sparc-tdep.
        * config/tm-sysv4.h (IN_SOLIB_TRAMPOLINE):  Use new in_plt_section.
        * config/sparc/tm-sun4sol2.h (IN_SOLIB_TRAMPOLINE):  Removed,
        the new generic definition from tm-sysv4.h works for Solaris.

Wed Mar 30 16:14:27 1994  Ian Lance Taylor  ([email protected])

        * elfread.c (elf_symtab_read): Change storage_needed,
        number_of_symbols and i to long.  Rename get_symtab_upper_bound to
        bfd_get_symtab_upper_bound.  Check for errors from
        bfd_get_symtab_upper_bound and bfd_canonicalize_symtab.
        * nlmread.c (nlm_symtab_read): Same changes.

Wed Mar 30 11:43:29 1994  Jim Kingdon  ([email protected])

        * xcoffread.c (xcoff_next_symbol_text): New function.
        (read_xcoff_symtab): Set next_symbol_text_func to it.
        Move raw_symbol outside of read_xcoff_symtab.

        * remote.c (getpkt): Remove unused "out" label.

Wed Mar 30 09:15:42 1994  Jeffrey A. Law  ([email protected])

        * breakpoint.c (print_it_normal): Allow GDB to notify the user
        about more than one watchpoint being triggered.

Wed Mar 30 08:24:18 1994  Jim Kingdon  ([email protected])

        * config/m68k/tm-dpx2.h: Include tm-m68k.h not nonexistent tm-68k.h.

Wed Mar 30 00:31:49 1994  Peter Schauer  ([email protected])

        * blockframe.c (find_pc_partial_function):  mst_file_text
        symbols do not live in the shared library transfer table.
        * ch-exp.y (decode_integer_value, match_character_literal,
        match_bitstring_literal):  Guard tolower calls with isupper,
        tolower on old BSD systems blindly subtracts a constant.
        * dbxread.c (read_ofile_symtab):  Check for __gnu_compiled_* as
        well when determining the producer of the object file.
        * mdebugread.c (has_opaque_xref):  New function to check for
        cross reference to an opaque aggregate.
        * mdebugread.c (parse_symbol, parse_partial_symbols):  Do not
        enter typedefs to opaque aggregates into the symbol tables.
        * mdebugread.c (parse_external):  Remove skip_procedures argument,
        it has always been 1.  Remove code that handled stProc symbols,
        it was never executed and was wrong, as the index of a
        stProc symbol points to the local symbol table and not to the
        auxiliary symbol info. Update caller.
        * mdebugread.c (parse_partial_symbols):  Do not enter external
        stProc symbols into the partial symbol table, they are already
        entered into the minimal symbol table.
        * config/i386/tm-symmetry.h:  Clean up, it is now only used for Dynix.
        Remove all conditionals and definitions for ptx.
        I386_REGNO_TO_SYMMETRY moved to here from symm-tdep.c.
        Fix addresses of floating point registers in REGISTER_U_ADDR.
        STORE_STRUCT_RETURN now handles cc and gcc conventions.
        FRAME_CHAIN, FRAMELESS_FUNCTION_INVOCATION, FRAME_SAVED_PC,
        IN_SIGTRAMP, SIGCONTEXT_PC_OFFSET defined to make backtracing through
        signal trampoline code work.
        * config/i386/xm-symmetry.h:  Clean up, it is now only used for Dynix.
        Remove all conditionals and definitions for ptx.
        Remove KDB definitions.
        * symm-nat.c (store_inferior_registers):  Fetch registers before
        storing them to obtain valid floating point control registers.
        Store fpu registers.
        * symm-nat.c (print_1167_control_word):  Dynix 3.1.1 defines
        FPA_PCR_CC_C0 and FPA_PCR_CC_C1, avoid duplicate case value.
        * symm-nat.c (fetch_inferior_registers, child_xfer_memory):
        Fix typos.
        * symm-nat.c (child_resume):  Update type of `signal' parameter.
        * symm-tdep.c (I386_REGNO_TO_SYMMETRY):  Moved to tm-symmetry.h.

Tue Mar 29 23:01:33 1994  Jeffrey A. Law  ([email protected])

        * hppa-tdep.c (hppa_fix_call_dummy): Use an alternate method for
        calling import stubs for functions in shared libraries.

Tue Mar 29 21:14:04 1994  Per Bothner  ([email protected])

        * ch-exp.y:  Implement SIZE(mode_name) and SIZE(expression).

        * ch-lang.c (chill_is_varying_struct):  Magic string is
        was "<var_length>" is now "__var_length" (more portable).

Tue Mar 29 19:41:34 1994  Jim Kingdon  ([email protected])

        * remote.c (getpkt): If we get a timeout, actually retry rather
        than just giving up the first time it happens.
        * remote.c: Document sequence numbers.
        (remote_store_registers): Change syntax of 'P' request so that it
        never looks like a sequence number.

Tue Mar 29 16:06:01 1994  Kung Hsu  ([email protected])

        * os9kread.c (record_minimal_symbol): add section_offset to
        relocate minimal symbol table.
        * os9kread.c (read_minimal_symbols): ditto.
        * os9kread.c (os9k_symfile_init): increase size of dbg and stb
        file names.
        * os9kread.c (read_os9k_psymtab): if there's no dbg file, just
        return. Also if file addr is 0 leave it 0, not to relocate.
        * remote-os9k.c (_initialize_remote_os9k): add 'set remotexon',
        'set remotexoff' and 'set remotelog' commands.

Tue Mar 29 12:38:45 1994  Jim Kingdon  ([email protected])

        * remote.c (remote_store_registers): Add 'P' request to set an
        individual register.
        (remote_write_bytes, remote_read_bytes): Use %lx, not %x, to print
        a target address.

Sat Mar 26 07:05:18 1994  Jim Kingdon  ([email protected])

        * config/sparc/tm-sparc.h: Define USE_REGISTER_NOT_ARG.
        * stabsread (define_symbol): If USE_REGISTER_NOT_ARG, go back to
        combining all 'p' and 'r' pairs into a LOC_REGPARM.

        * command.c (do_setshow_command, case var_string): Never add a
        space to the end of the string.
        * NEWS: Document this change.
        * .gdbinit: Add a space to the "set prompt" command.

Fri Mar 25 12:40:41 1994  Jim Kingdon  ([email protected])

        *  m3-nat.c, i386m3-nat.c, config/i386/i386m3.mh: Many minor
        changes to make it compile (it doesn't link yet).

        * buildsym.c (start_subfile, patch_subfile_names), demangle.c
        (set_demangling_style, set_demangling_command): Use savestring not
        strdup.  We were not dealing properly with a NULL return from
        strdup, and were not declaring strdup (the system header may or
        may not have it).

        * valprint.c (val_print): Remove inaccurate comment about what
        types can be stub types.

        * config/i386/ptx.mh (XDEPFILES): Add coredep.o.  Delete infptrace.o.
        * symm-nat.c (child_wait, _initialize_symm_nat, kill_inferior):
        Supply alternate version if ATTACH_DETACH is not defined.
        * ptx4-nat.c, config/i386/{nm-ptx4.h, ptx4.mh, ptx.mt, ptx4.mt,
        tm-ptx.h, tm-ptx4.h, xm-ptx.h, xm-ptx4.h}: New files.
        * configure.in: Recognize i[34]86-sequent-sysv4* host.

Fri Mar 25 10:14:03 1994  Jeffrey A. Law  ([email protected])

        * hppa-tdep.c (skip_prologue): Do nothing if not at the beginning
        of a function.
        (skip_trampoline_code): Rewrite and add support for argument
        relocation stubs stubs, import/export stubs, calls through
        "_sr4export" and cascaded trampolines.

        * hppa-tdep.c (skip_prologue): Return "pc" not zero
        if no unwind descriptor is found.

        * tm-hppa.h (NUM_REGS): Bump to 128 registers.
        (REGISTER_NAMES): Add entries for "right-half" of FP registers.
        (REGISTER_RAW_SIZE, MAX_REGISTER_RAW_SIZE): Do not treat FP regs
        differently.  All registers are four bytes.
        (REGISTER_BYTES, REGISTER_BYTE): Simplify now that all registers are
        the same size.
        (REGISTER_VIRTUAL_TYPE): Use builtin_type_float for all FP regs.

        * hppa-tdep.c (pa_print_fp_reg): Update to print even numbered FP
        registers as both single and double values (fetching 2nd 32bit half
        as necessary).  Annotate each register printed with its precision.

        * paread.c (read_unwind_info): Fix off-by-one error.

Fri Mar 25 08:33:28 1994  Jim Kingdon  ([email protected])

        * main.c (complete_command): Deal with it if arg is NULL.

Thu Mar 24 07:12:09 1994  Jim Kingdon  ([email protected])

        * config/mips/tm-mips.h (SETUP_ARBITRARY_FRAME): Revise comment
        regarding using the PC--using the PC is necessary and all the
        FIXME comments in the world won't make it go away.

        * valops.c (value_at, value_at_lazy): Give error if we dereference
        a pointer to void.
        * gdbtypes.h: Fix comments regarding TYPE_CODE_VOID.
        * stabsread.c: Use 1, not 0, for TYPE_LENGTH of void types.

        * stabsread.c (patch_block_stabs): Add comment about what happens
        if the definition is in another compilation unit from the stab.

        * dbxread.c (end_psymtab): Add comment about empty psymtabs.

Wed Mar 23 07:50:33 1994  Jim Kingdon  ([email protected])

        * main.c (complete_command): New command, from Rick Sladkey
        <[email protected]>.
        (symbol_completion_function): Don't declare rl_point and
        rl_line_buffer; they are now declared in readline.h.
        (show_commands): Don't declare history_base; it is declared in
        history.h.
        * command.c (lookup_cmd): Don't delete trailing whitespace.
        Reverts change of 14 May 1989.

Wed Mar 23 16:14:52 1994  Stu Grossman  (grossman at cygnus.com)

        * minsyms.c (prim_record_minimal_symbol):  Move section deduction
        code from prim_record_minimal_symbol_and_info() to here.  Callers
        of the latter can legitimately supply a section number of -1.

Wed Mar 23 07:50:33 1994  Jim Kingdon  ([email protected])

        * gdbtypes.h, gdbtypes.c: Add comments regarding whether static
        member functions have an element in args for a (nonexistent) this
        pointer.

Tue Mar 22 20:12:53 1994  Jeffrey A. Law  ([email protected])

        * config/pa/tm-hppao.h (NO_PC_SPACE_QUEUE_RESTORE): Define.

        * hppa-tdep.c (hppa_pop_frame): Do not restore the PC space
        queue if NO_PC_SPACE_QUEUE_RESTORE is defined.

        * stabsread.c (REG_STRUCT_HAS_ADDR): Accept additional argument
        for the structure's type.  All callers changed.

        * valops.c (call_function_by_hand): Check REG_STRUCT_HAS_ADDR
        for each structure argument rather than assuming it's either
        true or false for all structure arguments.

        * config/pa/tm-hppa.h (REG_STRUCT_HAS_ADDR): Depend only
        on the length structure passed, not the compiler used.

        * config/sparc/tm-sparc.h (REG_STRUCT_HAS_ADDR): Accept additional
        argument for the structure's type.

Tue Mar 22 15:28:33 1994  Jim Kingdon  ([email protected])

        * values.c (set_internalvar): Don't set var->value until we are
        sure there won't be an error().

        * remote.c (get_offsets): Reinstate comment which was in
        remote_wait about use of SECT_OFF_TEXT and so on.

Mon Mar 21 13:11:30 1994  Peter Schauer  ([email protected])

        * symmisc.c (maintenance_check_symtabs):  New function to check
        consistency of psymtabs and symtabs.
        * symtab.h (maintenance_check_symtabs):  Add prototype.
        * maint.c:  Add new `maint check-symtabs' command.
        * config/i386/tm-i386aix.h, config/i386/tm-sun386.h,
        config/i386/tm-symmetry.h (REGISTER_CONVERT_TO_RAW):  Fix typo.
        * config/i386/tm-symmetry.h:  Make comment inside #if 0 a real
        comment.
        * config/i386/tm-symmetry.h (STORE_STRUCT_RETURN):  Cast argument
        to write_memory to avoid warnings from gcc.
        * config/i386/xm-symmetry.h:  Add missing #endif.
        * config/i386/nm-symmetry.h (NO_PTRACE_H):  Add for Dynix.
        * config/i386/symmetry.mt (TDEPFILES):  Add i386-tdep.o.
        * config/i386/symmetry.mh (NAT_FILE, NATDEPFILES):  Add.

Mon Mar 21 11:50:28 1994  Jeffrey A. Law  ([email protected])

        * hppa-tdep.c (hppa_fix_call_dummy): Use value_ptr.
        (hppa_push_arguments): Likewise.

Mon Mar 21 11:02:51 1994  Stu Grossman  (grossman at cygnus.com)

        * alpha-tdep.c:  Gobs of changes (many imported from mips-tdep) to
        improve remote debugging efficiency.  Also fixed problems with
        doing function calls for programs with no entry points.
        * infcmd.c (run_stack_dummy):  Use CALL_DUMMY_ADDRESS instead of
        entry_point_address.
        * inferior.h (PC_IN_CALL_DUMMY):  ditto.
        * mdebugread.c (parse_symbol, parse_procedure, parse_external,
        parse_lines):  Pass section_offsets info to these routines so that
        we can relocate symbol table entries upon readin.
        * (psymtab_to_symtab_1):  Set symtab->primary to tell
        objfile_relocate to do relocations for our symbols.
        * (ecoff_relocate_efi):  New routine to relocate adr field of PDRs
        (which hang off of the symbol table).
        * Use prim_record_minimal_symbols_and_info instead of
        prim_record_minimal_symbols to supply section info to make minimal
        symbol relocations work.
        * minsyms.c (prim_record_minimal_symbols_and_info):  If section is
        -1, try to deduce it from ms_type.
        * objfiles.c (objfile_relocate):  Use ALL_OBJFILE_SYMTABS where
        appropriate.  Handle relocation of MIPS_EFI symbols special. Also,
        add code to relocate objfile->sections data structure.
        * remote.c (get_offsets):  Use new protocol message to acquire
        section offsets from the target.
        * (remote_wait):  Get rid of relocation stuff.  That's all handled
        by objfile_relocate now.
        * config/alpha/alpha-nw.mt (TM_FILE):  Use tm-alphanw.h.
        * config/alpha/tm-alpha.h:  Define CALL_DUMMY_ADDRESS, and
        VM_MIN_ADDRESS.
        * config/alpha/tm-alphanw.h:  DECR_PC_AFTER_BREAK=0, VM_MIN_ADDRESS=0.

Sun Mar 20 15:21:57 1994  Doug Evans  ([email protected])

        * sparc-tdep.c (sparc_frame_find_save_regs): Use REGISTER_RAW_SIZE
        instead of 4.

start-sanitize-v9
        * sp64-tdep.c (target_ptr_bit, set_target_ptr_bit): Deleted,
        can no longer set this at run time.
        * config/sparc/sp64.mt (SIMFILES): Use remote-sim.o now.
        (TM_CLIBS): Define to -lm, the simulator uses the sqrt() function.
        * config/sparc/tm-sp64.h (FPS_REGNUM, CPS_REGNUM): Define (so
        sparc-tdep.c compiles).
        (TARGET_PTR_BIT): Must be a constant now, fix at 64.
end-sanitize-v9

Sat Mar 19 08:51:12 1994  Jim Kingdon  ([email protected])

        * config/m68k/{cisco.mt,tm-cisco.h}: New files.
        * Makefile.in (ALLPARAM, ALLCONFIG): Add them.
        * configure.in: Recognize m68*-cisco*-*.

        * Makefile.in (TAGS): Use variables directly, rather than using
        find, to locate TM_FILE, XM_FILE, and NAT_FILE.  This is faster
        and means that these filenames no longer need be unique across all
        the config/* directories.
        * configure.in: Put the config/*/ into TM_FILE, etc.

        * m68k-stub.c (computeSignal): Return SIGFPE, not SIGURG, for chk
        and trapv exceptions.

        * target.h (struct section_table), objfiles.h (struct obj_section):
        Change name of field sec_ptr to the_bfd_section.  More mnemonic
        and avoids the (sort of, for the ptx compiler) name clash with
        the name of the typedef.
        * exec.c, xcoffexec.c, sparc-tdep.c, rs6000-nat.c, osfsolib.c,
        solib.c, irix5-nat.c, objfiles.c, remote.c: Change users.

        * utils.c: Include readline.h.
        * Makefile.in (utils.o): Add dependency.

        * remote.c (getpkt): Add support for run-length encoding.

Fri Mar 18 19:11:15 1994  Steve Chamberlain  ([email protected])

        * utils.c (prompt_for_continue): Call readline, not gdb_readline.

Fri Mar 18 10:25:55 1994  Jim Kingdon  ([email protected])

        * dstread.c (record_minimal_symbol): New arg objfile.  Pass it to
        prim_record_minimal_symbol.
        Callers: Pass it.

        * regex.c (EXTEND_BUFFER): Adjust pointers within buffer by
        computing their offset from the start of the old buffer and adding
        to the new buffer, rather than by assuming we can add the
        difference between the old buffer and the new buffer (it might not
        fit in an int).  Merge in cosmetic differences from emacs regex.c
        version of this macro.

Wed Mar 16 15:28:54 1994  Ian Lance Taylor  ([email protected])

        * Makefile.in (install-only): Fix use of program_transform_name.

Wed Mar 16 07:18:43 1994  Jim Kingdon  ([email protected])

        * printcmd.c: Remove "set print fast-symbolic-addr off" command.
        The bug which it worked around was fixed on 25 Feb 94 in coffread.c,
        so I'm nuking the command.
        * symtab.c (find_addr_symbol): Comment out, no longer used.

        * main.c (main): Don't init_source_path for the -cd argument.  Now
        that source_path doesn't contain the current_directory from when
        GDB started up, init_source_path is no longer useful (and is
        harmful because it clobbers a source_path set in $HOME/.gdbinit).

        * TODO: Remove item about line numbers being off.  It is useless
        and confusing without a reproducible test case (it mentions
        proceed(), but I was able to step through proceed without trouble).

Tue Mar 15 13:39:23 1994  Peter Schauer  ([email protected])

        For Sunos 4.x targets, enable gdb to set breakpoints in shared
        library functions before the executable is run. Retrieve dynamic
        symbols from stripped executables.
        * symtab.h (minimal_symbol_type):  Add mst_solib_trampoline type.
        * parse.c (write_exp_msymbol), symmisc.c (dump_msymbols),
        symtab.c (list_symbols):  Handle mst_solib_trampoline.
        * minsyms.c (lookup_minimal_symbol):  Handle mst_solib_trampoline
        for all targets, remove IBM6000_TARGET dependencies.
        * dbxread.c (read_dbx_dynamic_symtab):  New function.
        * dbxread.c (dbx_symfile_read):  Use it.
        * dbxread.c (SET_NAMESTRING):  Set namestring to
        "<bad string table index>" instead of "foo" if the string index is
        corrupt.
        * xcoffread.c (read_xcoff_symtab):  Use mst_solib_trampoline instead
        of mst_unknown.
        * symtab.c (list_symbols):  Take from_tty as parameter and pass it
        to break_command. Handle mst_file_* minimal symbol types.
        * config/i386/tm-i386bsd.h: Give just macro name, not args, to #undef.

Tue Mar 15 11:40:43 1994  Kung Hsu  ([email protected])

        * c-exp.y(yylex): fix potential memory overflow.

Tue Mar 15 10:33:28 1994  Jim Kingdon  ([email protected])

        * environ.c (set_in_environ): Eliminate special handling of PATH and
        GNUTARGET.
        * putenv.c: Removed, conflicts with system declaration of
        putenv on RS/6000 running AIX 3.2.5, and above change makes it
        unnecessary. 
        * Makefile.in: Change accordingly.
        * procfs.c (procfs_create_inferior): Change comment accordingly.

Tue Mar 15 10:05:27 1994  Jim Kingdon  ([email protected])

        * rs6000-tdep.c: Change value to value_ptr.

Sun Mar 13 09:45:51 1994  Jim Kingdon  ([email protected])

        * i386m3-nat.c: Include floatformat.h.
        (get_i387_state): Use memset not bzero.

        * Version 4.12.3.

        * Makefile.in: Enable commented out getopt_h, bfd_h, etc.  Change
        ieee-float.h to floatformat.h.

        * valprint.c (val_print_string): Ignore error if the error
        happened after a terminating '\0'.

        * c-valprint.c (c_val_print): Never add 1 to return value from
        val_print_string; just return what it returns.

        * target.h (enum target_signal): Add TARGET_SIGNAL_FIRST, for
        looping through all of the enums.
        * infrun.c (signals_info): Use it.

Fri Mar 11 08:08:50 1994  Jim Kingdon  ([email protected])

        * main.c (main): When printing warning about bad baud rate, don't
        use warning(); it relies on current_target which isn't set up yet.

        * breakpoint.c (_initialize_breakpoint): Update docstring for
        tbreak to match what the code actually does.  Don't mention tbreak
        in docstrings for "enable once" or "enable breakpoints once".

Thu Mar 10 08:52:38 1994  Jim Kingdon  ([email protected])

        * symfile.h (ADD_PSYMBOL_VT_TO_LIST): Don't put a semicolon after
        while (0).  That defeats the whole purpose of using do . . . while (0).
        * mdebugread.c (parse_partial_symbols): Don't use ?: expression as
        list for ADD_PSYMBOL_TO_LIST; the macro takes its address and
        using a ?: expression as an lvalue is not portable.

        * stabsread.c (define_symbol): If REG_STRUCT_HAS_ADDR, also
        convert a LOC_ARG to a LOC_REF_ARG.  Update code which combines
        'p' and 'r' symbol descriptors into a single symbol to look for a
        LOC_REF_ARG.
        * README, config/sparc/tm-sparc.h: Update comments.

Wed Mar  9 21:43:24 1994  Peter Schauer  ([email protected])

        * mdebugread.c (parse_type):  Do not complain for types with
        an `indexNil' aux index, these are simply undefined types.
        Remove indexNil check from caller of parse_type.
        * mdebugread.c (parse_partial_symbols):  Do not enter
        stGlobal, scCommon symbols into the minimal symbol table, their
        value is the size of the common, not its address.
        Handle scInit, scFini, scPData and scXData sections.
        Use minimal symbol type mst_file_* for stLabel symbols, instead of
        mst_*.
        Enter stProc symbols into the global_psymbols list once, not into
        the static_psymbols_list.
        Get rid of dummy psymtab if it is empty, to allow proper detection
        of stripped executables.
        * mdebugread.c (cross_ref):  Allow cross references to Fortran
        common blocks.

Wed Mar  9 15:23:19 1994  Jim Kingdon  ([email protected])

        * stabsread.c (common_block_end, fix_common_block): Stash the
        struct pending * in the SYMBOL_TYPE, not the SYMBOL_NAMESPACE, so
        as to not assume that a pointer fits in an enum.

Wed Mar  9 18:56:36 1994  Kung Hsu  ([email protected])

        * os9kread.c (fill_sym): check compiler verion number for pre-
        UltraC compiler.
        * os9kread.c (os9k_process_one_symbol): address of symbol is
        relative to section not module.
        * stabsread.c (define_symbol): add symbol type 's' as local
        symbol for os9k.
        * remote-os9k.c: add command 'set monitor_log' to turn on or off
        monitor logging.
        * remote-os9k.c: fix bug in delete breakpoint, single step trace.
        * remote-os9k.c: fix bug in 'set remotebaud' function.
        * remote-os9k.c (rombug_link): minimize checking so to improve
        speed.
        * symfile.c (symbol_file_command): check if failed to link, also make
        the command be able to accept more than one filenames.
        * target.c (target_link): check if failed to link with rombug.
        * config/i386/tm-i386os9k.h : add #define DECR_PC_AFTER_BREAK 0.

Wed Mar  9 15:23:19 1994  Jim Kingdon  ([email protected])

        * remote-es.c (es1800_child_ops): Don't declare it static.

Tue Mar  8 11:42:39 1994  Jim Kingdon  ([email protected])

        * config/i386/tm-i386v4.h: Give just macro name, not args, to #undef.

Tue Mar  8 06:56:13 1994  Jim Kingdon  ([email protected])

        * dbxread.c: New variable lowest_text_address.
        (record_minimal_symbol, read_dbx_symtab): Set it.
        (read_dbx_symtab): Use lowest_text_address + text_size instead of
        end_of_text_address.
        * config/gould/tm-pn.h: Add comment regarding END_OF_TEXT_DEFAULT.

        * dbxread.c (end_psymtab): Remove old and commented out
        capping_global and capping_static.  Fix comments regarding
        N_SO_ADDRESS_MAYBE_MISSING to match the real name of the macro.

        * parser-defs.h: Add "extern" to start of variable declarations so
        we don't end up with commons.
        * parse.c: Define these variables.

        * irix5-nat.c (find_solib): Cast o_path to CORE_ADDR when using it
        as one.

Mon Mar  7 13:00:50 1994  Jim Kingdon  ([email protected])

        * alpha-tdep.c: Change value to value_ptr.

Sun Mar  6 17:36:53 1994  Peter Schauer  ([email protected])

        * solib.c (elf_locate_base):  New function to locate the address
        of the dynamic linker's runtime structure in the dynamic info section.
        * solib.c (locate_base):  Use it instead of iterating over the list
        of mapped address segments.
        * solib.c (look_for_base, bfd_lookup_symbol):  Removed, no longer
        necessary.

Fri Mar  4 09:50:47 1994  Jeffrey A. Law  ([email protected])

        * hppa-tdep.c (pc_in_linker_stub): Move decl to beginning of file.
        (pc_in_interrupt_handler): New function.  Also add PARAM decl.
        (find_proc_framesize): Deal with HPUX setting SAVE_SP bit for
        signal trampoline and interrupt routines.
        (frame_saved_pc): Handle signal trampolines and interrupt routines.
        (frame_chain, frame_chain_valid): Likewise.
        (hppa_frame_find_saved_regs): Likewise.  Also deal with special
        saved regs convention for SP.
        
        * tm-hppa[bho].h: FRAME_FIND_SAVED_PC_IN_SIGTRAMP): Define.
        (FRAME_BASE_BEFORE_SIGTRAMP): Define.
        (FRAME_FIND_SAVED_REGS_IN_SIGTRAMP): Define.

        * tm-hppah.h (IN_SIGTRAMP): Define.

Thu Mar  3 12:41:16 1994  Jim Kingdon  ([email protected])

        * ch-exp.y (match_simple_name_string): Accept '_' as well as an
        alphabetic character as the start of a name.

        * sparclite/Makefile.in (all install): Build and install aload.

        * configure.in: Accept i[34]86-*-*sysv32 because that is what
        config.guess and config.sub produce.

        * mips-tdep.c: Change value to value_ptr.

Wed Mar  2 09:17:55 1994  Jim Kingdon  ([email protected])

        * breakpoint.c, breakpoint.h, c-valprint.c, ch-valprint.c,
        cp-valprint.c, eval.c, expprint.c, findvar.c, language.c,
        objfiles.h, infcmd.c, printcmd.c, stack.c, typeprint.c,
        valarith.c, valops.c, valprint.c, value.h, values.c: Replace
        value with value_ptr.  This is for the ptx compiler.
        * objfiles.h, target.h: Don't declare a "sec_ptr" field using a
        "sec_ptr" typedef.
        * symm-nat.c: Add a bunch of stuff for symmetry's ptrace stuff.
        #if 0 i386_float_info.
        * symm-tdep.c (round): Remove.  Also remove sgttyb.
        * symm-tdep.c: Remove lots of stuff which duplicates stuff from
        i386-tdep.c.  Remove register_addr and ptx_coff_regno_to_gdb.
        * i386-tdep.c (i386_frame_find_saved_regs): Put in
        I386_REGNO_TO_SYMMETRY check in case it is needed for Dynix
        someday.
        * config/i386/nm-symmetry.h: Change KERNEL_U_ADDR.  Move
        stuff from PTRACE_READ_REGS, PTRACE_WRITE_REGS macros to
        symm-nat.c.  Define CHILD_WAIT and declare child_wait().
        * config/i386/tm-symmetry.h: Remove call function stuff; stuff in
        tm-i386v.h is apparently OK.
        * config/i386/xm-symmetry.h [_SEQUENT_]: Define HAVE_TERMIOS not
        HAVE_TERMIO.  Define MEM_FNS_DECLARED, NEED_POSIX_SETPGID, and
        USE_O_NOCTTY.

Wed Mar  2 11:31:08 1994  Peter Schauer  ([email protected])

        * osfsolib.c (xfer_link_map_member): Update to use new
        target_read_string interface.

Wed Mar  2 09:17:55 1994  Jim Kingdon  ([email protected])

        * infrun.c (wait_for_inferior): In checking
        remove_breakpoints_on_following_step, check
        through_sigtramp_breakpoint as well as step_resume_breakpoint.

Tue Mar  1 16:22:56 1994  Jim Kingdon  ([email protected])

        * os9kread.c (os9k_process_one_symbol): Rename
        VARIABLES_INSIDE_BLOCK to OS9K_VARIABLES_INSIDE_BLOCK.
        * symfile.c (symbol_file_command): Check for (CORE_ADDR)-1, not
        (CORE_ADDR)0, from target_link, since that is what it uses.
        Process name at end, not during parsing (like we did before Kung's
        change), so that -readnow and -mapped can appear anywhere.
        Make text_relocation a local variable.
        * config/i386/i386os9k.mt: Fix comment.
        * Makefile.in (ALLDEPFILES): Add remote-os9k.c.
        * os9kread.c: Put "comments" after #endif inside /* */.
        * stabsread.h: Add os9k_stabs variable.
        * stabsread.c (start_stabs), os9kread.c (os9k_process_one_symbol):
        Set it.
        * stabsread.c (define_symbol): If os9k_stabs, put a 'V' symbol
        descriptor in global_symbols not local_symbols.
        (read_type): If os9k_stabs, accept 'c', 'i', and 'b' type
        descriptors.
        (read_type): If os9k_stabs, accept function parameters after 'f'
        type descriptor.
        (read_array_type): If os9k_stabs, don't expect index type and
        expect lower and upper to be separated by ',' not ';'.
        (read_enum_type): If os9k_stabs, read a number before the first
        enumeration constant.
        (os9k_init_type_vector): New function.
        (dbx_lookup_type): Call it when starting new type vector.
        * config/i386/tm-i386os9k.h: Define BELIEVE_PCC_PROMOTION.
        * (os9k_process_one_symbol): Call define_symbol not os9k_define_symbol.
        * os9kstab.c: Removed.
        * Makefile.in: Update accordingly.
        * objfiles.c (objfile_relocate_data): Removed.
        * remote-os9k.c (rombug_wait): Call objfile_relocate
        not objfile_relocate_data.
        * objfiles.h, objfiles.c: Remove find_pc_objfile.
        * remote-os9k.c (rombug_wait): Call find_pc_section not
        find_pc_objfile.
        * main.c (quit_command): Check inferior_pid; revert Kung change.
        * remote-os9k.c (rombug_create_inferior): Set inferior_pid.

Tue Mar  1 14:56:14 1994  Kung Hsu  ([email protected])

        * os9kread.c: New file to read os9000 style symbo table.
        * os9kstab.c: new file to read os9000 style stabs.
        * remote-os9k.c: remote protocol talking to os9000 rombug monitor.
        * objfiles.c (find_pc_objfile): new function to search objfile
        from pc.
        * objfiles.c (objfile_relocate_data): new function to relocate
        data symbols in symbol table.
        * objfiles.h: Add two aux fields in struct objfile to handle
        multiple symbol table files situation like in os9000.
        * symfile.c: Change so 'symbol-file' command can handle multiple
        files. Also call target_link() to get relocation infos.
        * target.c (target_link): new function to get relocation info when
        a symbol file is requested to load.
        * main.c (quit_command): take out 'inferior_pid != 0' condition,
        because in cross mode there's no inferior pid, bit they need to
        be detached.
        Makefile.in: add os9kread.c os9kstab.c and .o's.
        configure.in: add i386os9k target.
        config/i386/i386os9k.mt: new add.
        config/i386/tm-i386os9k.h: new add.

Tue Mar  1 13:16:10 1994  Peter Schauer  ([email protected])

        * config/sparc/tm-sun4sol2.h (IN_SIGTRAMP):  Handle ucbsigvechandler.
        * sparc-tdep.c (sparc_frame_saved_pc):  Handle ucbsigvechandler.

Tue Mar  1 11:54:11 1994  Jim Kingdon  ([email protected])

        * target.c, target.h (target_read_string): Provide error detection to
        caller.  Put string in malloc'd space, so caller need not impose
        arbitrary limits.
        * solib.c (find_solib): Update to use new interface.
        * irix5-nat.c (find_solib): Read o_path from inferior
        (clear_solib): Free storage for o_path.
        * valprint.c (val_print_string): Add comments.

Mon Feb 28 23:54:39 1994  Peter Schauer  ([email protected])

        * symtab.c (decode_line_1):  Handle the case when skip_quoted does not
        advance `p'.

Mon Feb 28 12:40:46 1994  Jim Kingdon  ([email protected])

        * value.h (struct value): Add modifiable field.
        * values.c (allocate_value, record_latest_value, value_copy): Set it.
        (record_latest_value): Don't mess with VALUE_LVAL of value.
        * valops.c (value_assign): Check it.  Reword existing error
        message on not_lval.

        * mips-tdep.c (mips_step_skips_delay), config/mips/tm-mips.h
        (STEP_SKIPS_DELAY): Added.
        * infrun.c (proceed) [STEP_SKIPS_DELAY]: Check for a breakpoint in
        the delay slot.

        * valprint.c (val_print_string): If errcode is set, always print
        an error, regardless of force_ellipsis.  In the non-EIO case,
        just print the error message rather than calling error().  Don't
        access *(bufptr-1) if bufptr points to the start of the buffer.
        When looking for '\0', don't increment bufptr and addr if bufptr
        started out already at limit.  If an error happens on fetching the
        first character, don't print the string.

Sun Feb 27 21:05:06 1994  Jim Kingdon  ([email protected])

        * config/m68k/tm-apollo68b.h: Remove HAVE_68881 define; it is
        obsolete. 

        * i387-tdep.c, i386-tdep.c i386v-nat.c, i386aix-nat.c,
        i386m3-nat.c, config/m68k/tm-m68k.h, i960-tdep.c
        config/i960/tm-i960.h, remote-nindy.c, config/m88k/tm-m88k.h,
        m88k-tdep.c: Use floatformat.h instead of ieee-float.h.
        * sparc-tdep.c: Remove now-obsolete ieee-float.h stuff
        * findvar.c: Update comment regarding ieee-float.h.

Sun Feb 27 21:39:48 1994  Peter Schauer  ([email protected])

        * config/i386/tm-i386v4.h (I386V4_SIGTRAMP_SAVED_PC, IN_SIGTRAMP,
        FRAME_CHAIN, FRAMELESS_FUNCTION_INVOCATION, FRAME_SAVED_PC):
        Define to make backtracing through the various sigtramp handlers
        work.
        * i386-tdep.c (i386v4_sigtramp_saved_pc):  New routine to fetch
        the saved pc from ucontext on the stack for SVR4 signal handling.

Fri Feb 25 09:41:11 1994  Jim Kingdon  ([email protected])

        * remote.c, remote-mon.c, remote-utils.c, remote-utils.h,
        target.h, remote-es.c, remote-nindy.c: Don't set baud rate if
        baud_rate is -1.  Remove sr_get_baud_rate and sr_set_baud_rate;
        just use the global variable itself.  When printing baud rate,
        don't print a baud rate if baud_rate is -1.

        * coffread.c (read_coff_symtab): Pass mst_file_* to
        record_minimal_symbol for C_STAT symbols.  Put C_EXT and C_STAT
        symbols in the minimal symbols regardless of SDB_TYPE.

Thu Feb 24 08:30:33 1994  Jim Kingdon  ([email protected])

        * breakpoint.h (enum bptype): New type bp_through_sigtramp.
        (bpstat_what_main_action): New code BPSTAT_WHAT_THROUGH_SIGTRAMP.
        * breakpoint.c (bpstat_what): Return BPSTAT_WHAT_THROUGH_SIGTRAMP
        if we hit a bp_through_sigtramp breakpoint.  Remove kludge which
        ignored bs->stop for a bp_step_resume breakpoint.
        * infrun.c (wait_for_inferior): Make a through_sigtramp_breakpoint
        which performs one (the check_sigtramp2 one) of the functions
        which had been handled by the step_resume_breakpoint.  For each
        use of the step_resume_breakpoint, make it still use the
        step_resume_breakpoint, use the through_sigtramp_breakpoint, or
        operate on both.
        Deal with BPSTAT_WHAT_THROUGH_SIGTRAMP return from bpstat_what.
        When setting the frame address of the step resume breakpoint, set
        it to the address for frame *before* the call instruction is
        executed, not after.

        * mips-tdep.c (mips_print_register): Print integers using
        print_scalar_formatted rather than duplicating all the
        CC_HAS_LONG_LONG and so on.
        (mips_push_dummy_frame): Use read_register_gen rather than using
        read_register and then putting it back in target format with
        store_unsigned_integer.  If registers are more than 4 bytes, give
        an error rather than have some registers overwrite other
        registers.
        #if 0 unused include of opcode/mips.h.

        * symfile.h: Don't declare arguments for coff_getfilename.

        * defs.h: Revert Kung change regarding FORCE_LONG_LONG.

Thu Feb 24 08:06:52 1994  Jeffrey A. Law  ([email protected])

        * configure.in (hppa*-*-osf*): New configuration.
        * config/pa/hppaosf.mt: New target makefile fragment.
        * config/pa/tm-hppao.h: New target include file.

Thu Feb 24 04:29:19 1994  Peter Schauer  ([email protected])

        * exec.c (print_section_info):  Print entry point for exec_bfd only.
        * ser-unix.c (wait_for):  Fix typo in HAVE_TERMIO case.
        * dwarfread.c:  Remove second inclusion of <sys/types.h>, which
        causes problems if <sys/types.h> has no multiple inclusion protection.

Wed Feb 23 16:28:55 1994  Jeffrey A. Law  ([email protected])

        * tm-hppa.h (CALL_DUMMY): Add two NOP instructions to the end of
        the call dummy to avoid kernel bugs in HPUX, BSD, and OSF1.
        (CALL_DUMMY_LENGTH): Changed accordingly.

Wed Feb 23 16:21:25 1994  Stu Grossman  (grossman at cygnus.com)

        * sparc-stub.c (trap_low):  Make trap handler work for arbitrary
        numbers of register windows.

        * sparclite/hello.c:  Add factorial function for testing.
        * salib.c:  Use macros instead of constants for I/O addresses to
        make 931 support easier.
        * sparclite.h:  Change constraint for LOC to "rJ" to force use of
        register in sta/lda instructions.

Wed Feb 23 10:39:18 1994  Jim Kingdon  ([email protected])

        * dbxread.c (process_one_symbol): Set
        block_address_function_relative for COFF like we do for ELF and SOM.

Sat Feb 19 03:17:32 1994  Peter Schauer  ([email protected])

        * mdebugread.c (new_psymtab):  Pass in section_offsets and set
        them in the pst.
        * mdebugread.c (handle_psymbol_enumerators):  New function to enter
        the enumerators of an ecoff enum into the partial symbol table.
        * mdebugread.c (parse_partial_symbols):  Call it.
        * symfile.c (reread_symbols):  Initialize objfile->*_psymbols.next.
        * symmisc.c (dump_psymtab):  Fix typo, clean up output of section
        offsets. Cast psymtab->read_symtab to PTR before passing it to
        gdb_print_address.
        * i386-tdep.c (i386_skip_prologue):  Skip over instructions that
        set up the global offset table pointer in pic compiled code.
        * config/mips/tm-mips.h (FIX_CALL_DUMMY):  For big endian targets,
        error() on TYPE_CODE_FLT arguments whose size is greater than 8,
        swap all other TYPE_CODE_FLT arguments as mips_push_arguments
        ensures that floats are promoted to doubles before they are pushed
        on the stack.

Fri Feb 18 23:12:59 1994  Stu Grossman  (grossman at cygnus.com)

        * sparclite/Makefile.in, sparclite/salib.c, sparclite/sparclite.h:
        Fixup cache_on and flush_i_cache so that they work for both the
        930 and 932 processors.  Rewrite most low level funcs (uart
        access & cache stuff) to use new ASI access macros in sparclite.h.
        Also make it easy to access second serial port.

Fri Feb 18 22:17:33 1994  Ian Lance Taylor  ([email protected])

        * hp300ux-nat.c: Don't incloude <sys/dir.h>, <sys/ioctl.h>, or
        <sys/stat.h>; not needed.

Fri Feb 18 08:26:29 1994  Jim Kingdon  ([email protected])

        * stack.c (print_frame_info): In "pathological" case, don't
        distrust the line number information.

Fri Feb 18 16:51:14 1994  Kung Hsu  ([email protected])

        * mips-tdep.c (mips_print_register): handle 64 bits register.
        * valprint.c (print_longest): fix a bug in printing 64 bits value.

Fri Feb 18 08:26:29 1994  Jim Kingdon  ([email protected])

        * Version 4.12.2.

        * Makefile.in (install): Do the sed for program_transform_name
        ourselves instead of worrying about INSTALL_XFORM.  This enables
        users to override INSTALL_PROGRAM in the standard way.

        * Makefile.in (c-exp.tab.o, ch-exp.tab.o, m2-exp.tab.o): Don't
        depend on Makefile.in.

        * defs.h, valprint.c: Make longest_to_int a function not a macro.
        Only test against INT_MIN if a LONGEST is bigger than an int.

        * README: Change GhostScript to Ghostscript.

Fri Feb 18 07:30:55 1994  Jim Kingdon  ([email protected])

        * config/rs6000/{tm-rs6000lynx.h,nm-rs6000lynx.h,xm-rs6000lynx.h}:
        Rename to tm-rs6000ly.h, nm-rs6000ly.h, xm-rs6000ly.h for 14
        character file names.
        * Makefile.in (ALLPARAM): Add these files.

        * config/mips/littlemips64.mt: Rename to mipsel64.mt for 14
        character file names.
        * Makefile.in: Add Kung's new mips64 files.

Thu Feb 17 17:25:47 1994  Kung Hsu  ([email protected])

        * configure.in: add mips64-*-elf, mips64-*-ecoff, mips64el-*-elf,
        mips64el-*-ecoff and mips64-big-*.
        * defs.h: get rid of FORCE_LONG_LONG.
        * mips-tdep.c (mips_find_saved_regs): add sd and sdc1 instruction
        parsing. Change register size to be MIPS_REGSIZE.

Thu Feb 17 09:30:22 1994  David J. Mackenzie  ([email protected])

        * corelow.c, exec.c, irix5-nat.c, mipsread.c, objfiles.c, 
        osfsolib.c, rs6000-nat.c, solib.c, symfile.c, utils.c, 
        xcoffexec.c: Use bfd_get_error and bfd_set_error and new error names.

Fri Feb 11 21:47:24 1994  Steve Chamberlain  ([email protected])

        * remote-hms.c (readchar, hms_open, hms_fetch_register): Made more robust.
        (remove_commands, add_commands): Add/remove hms-drain when target
        is connected.

Fri Feb 11 16:11:38 1994  Stu Grossman  (grossman at cygnus.com)

        * configure.in:  Add Lynx/rs6000 support.
        * lynx-nat.c:  Clean up some Sparc stuff.  Clean up ptrace error
        messages.  Add rs6000 support.  Don't try to modify unwritable
        registers.
        * rs6000-nat.c:  Move lots of native dependent stuff (like core
        file support) from rs6000-tdep.c & xcoffexec.c to here.
        * rs6000-tdep.c:  Move native dependent stuff to nat.c.
        * xcoffexec.c:  Move native dependent stuff to nat.c.
        * config/rs6000/nm-rs6000.h:  Move defs of SOLIB_* macros to here
        from tm file.
        * config/rs6000/tm-rs6000.h:  Remove defs of SOLIB_* funcs, cuz they're
        really native.
        * config/rs6000/tm-rs6000lynx.h, config/rs6000/xm-rs6000lynx.h:
        New files to support Lynx/rs6000.

Tue Feb  8 00:32:28 1994  Peter Schauer  ([email protected])

        * README:  Remove note about gcc warnings on alpha, these should be
        gone now.
        * c-exp.y, ch-exp.y, core.c, corelow.c, eval.c, fork-child.c, 
        m2-exp.y, minsyms.c, nlmread.c, parse.c, putenv.c, regex.c
        remote-utils.c, stabsread.c:  Include <string.h>.
        * regex.c:  Include "defs.h", change re_comp argument to const char *.
        * infptrace.c (fetch_register, store_inferior_registers):  Change
        regaddr to type CORE_ADDR.
        * config/alpha/alpha-nw.mt, config/alpha/alpha-osf1.mt (MT_CFLAGS):
        Remove, no longer necessary now that we use bfd_vma for a CORE_ADDR.

Mon Feb  7 09:21:17 1994  Jim Kingdon  ([email protected])

        * symtab.h: Always define BYTE_BITFIELD to nothing.

Mon Feb  7 08:44:17 1994  Jim Kingdon  ([email protected])

        * config/m68k/{m68k-em.mt,tm-m68k-em.h}: Remove; no longer used.
        * configure.in: Remove comment about m68k-em.mt.
        * Makefile.in: Remove references.

Mon Feb  7 08:22:42 1994  Jim Kingdon  ([email protected])

        * defs.h [BFD64]: Use BFD_HOST_64_BIT, not nonexistent
        BFD_HOST_64_TYPE.

Sun Feb  6 06:55:15 1994  Jim Kingdon  ([email protected])

        * target.c (target_preopen): If target_kill doesn't remove the
        target from the stack, use pop_target to do it.

        * coffread.c (process_coff_symbol, case C_TPDEF): Don't set name
        of TYPE_CODE_PTR or TYPE_CODE_FUNC types.  This parallels similar
        changes to stabsread.c from summer 1993.

        * remote-udi.c (udi_files_info): If prog_name is NULL, just skip
        printing the program, rather than passing NULL to printf.
        (udi_detach): Set udi_session_id to -1 so that udi_close doesn't
        try to call UDIDisconnect again.  Print better message.
        (udi_kill): Just call UDIDisconnect ourselves, rather than doing
        it via udi_close.
        (udi_create_inferior): If udi_session_id is negative, open a new
        TIP rather than giving an error.

        * config/mips/mipsm3.mh, config/i386/i386m3.mh,
        config/ns32k/ns32km3.mh: Define NAT_FILE.
        * config/nm-m3.h: Change guard from _OS_MACH3_H_ and _OS_MACH3_H
        (it was inconsistent and namespace-wrong) to NM_M3_H.
        * m3-nat.c (mach_really_wait): Change parameter name to ourstatus.
        (m3_open): New function.
        (m3_ops): Use it.
        * TODO: Update Mach section.

        * Makefile.in: Remove "rapp" stuff; it is superseded by gdbserver.

Sun Feb  6 13:26:21 1994  Per Bothner  ([email protected])

        * printcmd.c (printf_command):  Add missing single-letter
        backslash-escape sequences, and improve error message.

Sun Feb  6 06:55:15 1994  Jim Kingdon  ([email protected])

        * corelow.c (solib_add_stub, core_open): Pass address of from_tty
        rather than trying to shove an int into a pointer and back out
        again.  This avoids compiler warnings.

        * defs.h (alloca): Declare as void *, not char *, on hpux.
        Don't prototype it, just declare the return type.

Sun Feb  6 03:25:41 1994  Peter Schauer  ([email protected])

        * config/i386/tm-sun386.h, config/i386/tm-symmetry.h
        (REGISTER_CONVERT_TO_RAW):  Add missing backslash.

Sat Feb  5 08:03:41 1994  Jim Kingdon  ([email protected])

        * remote-mips.c (mips_fetch_registers): If regno is FP_REGNUM or
        ZERO_REGNUM, just read it as zero without talking to the board.

        * config/i386/tm-i386aix.h (REGISTER_CONVERT_TO_RAW): Add missing
        backslash.
        * i386-tdep.c (i386_extract_return_value): Pass TYPE_LENGTH (type)
        to store_floating, not nonexistent variable len.

        * remote-mips.c (mips_insert_breakpoint, mips_remove_breakpoint):
        New functions.
        (mips_store_word): Change calling convention to return errors, and
        to provide old contents if the caller wants it.
        (mips_xfer_memory): Deal with errors from mips_store_word.
        * config/mips/tm-idt.h, config/mips/tm-idtl.h: Remove BREAKPOINT
        define now that remote-mips.c doesn't use BREAKPOINT.

        * remote-mips.c (mips_create_inferior): Call warning if arguments
        specified, and then execute "set args" command.  Call error, not
        mips_error, if executable file not specified.

        * remote-e7000.c: Replace "snoop" command (e7000_noecho) with
        remote_debug.

        * config/rs6000/tm-rs6000.h (STORE_STRUCT_RETURN): Don't cast
        to unsigned int.

Sat Feb  5 05:27:05 1994  Peter Schauer  ([email protected])

        * value.h (print_longest):  Rename "value" to "val" in prototype
        declaration because some compilers don't like arguments whose
        names are the same as types.
        * remote.c (remote_xfer_memory):  Cast "myaddr" to unsigned char *
        before passing it to remote_*_bytes.

Fri Feb  4 15:53:18 1994  Steve Chamberlain  ([email protected])

        * h8500-tdep.c (saved_pc_after_call): The size of the
        pc is memory model dependent. (segmented_command,
        unsegmented_command, _initialize_h8500_tdep): New commands to
        change memory model.
        * remote-e7000.c (_initialize_remote_e7000): Change name of snoop
        command.
        * remote-hms.c (hms_load): Remove breakpoints when loaded.
        (hms_wait): Use new status structure
        (hms_open): Push the target here. (hms_before_main_loop): Not
        here.  (supply_val, hms_fetch_register, hms_store_register):  Cope
        with H8/500 names too. (hms_fetch_register): Take out REGISTER_TYPE.
        * sh-tdep.c (show_regs, initialize_sh_tdep): New command to print
        all registers in a compact way.

Fri Feb  4 07:41:13 1994  Jim Kingdon  ([email protected])

        * config/rs6000/tm-rs6000.h: Declare rs6000_struct_return_address
        as CORE_ADDR to match definition in rs6000-tdep.c.

Fri Feb  4 01:14:20 1994  Peter Schauer  ([email protected])

        * dwarfread.c (process_dies):  Skip nested TAG_compile_unit DIEs.
        * dwarfread.c (add_partial_symbol):  Do not enter opaque aggregate
        definitions into the psymtab.

Thu Feb  3 12:38:58 1994  Jim Kingdon  ([email protected])

        * m68k-stub.c: Treat mc68332 like mc68020 most places.  Provide
        a special exceptionSize for the 68332.

        * remote-udi.c (udi_attach): If no arguments, print error.

Thu Feb  3 17:34:05 1994  Fred Fish  ([email protected])

        * Makefile.in (VERSION):  Bump to 4.12.1
        * NEWS, README:  Update to match 4.12 release.

Thu Feb  3 12:38:58 1994  Jim Kingdon  ([email protected])

        * command.c (empty_sfunc): New function.
        (add_set_cmd): Use it instead of not_just_help_class_command.
        (not_just_help_class_command): Change calling convention back to
        what it was before yesterday's change.

        * stabsread.c (read_sun_builtin_type): Skip the semicolon at the end
        of the type if present.

Wed Feb  2 11:16:45 1994  Jim Kingdon  ([email protected])

        * printcmd.c (decode_format): Don't blithely set the size for
        an address to 'w'.  Make it 'g' or 'h', depending on TARGET_PTR_BIT.

        * defs.h: Just typedef CORE_ADDR to bfd_vma.  Include bfd.h.
        If BFD64, make a LONGEST a BFD_HOST_64_BIT.
        * defs.h (longest_to_int): Don't depend on CC_HAS_LONG_LONG; instead
        always just check against INT_MIN and INT_MAX (this also fixes things
        if sizeof (long) > sizeof (int), e.g. Alpha).
        * config/pa/tm-hppa.h, config/i386/sun386.h, config/rs6000/tm-rs6000.h:
        Don't define LONGEST or BUILTIN_TYPE_LONGEST.
        * gdbtypes.h: Remove BUILTIN_TYPE_LONGEST and
        BUILTIN_TYPE_UNSIGNED_LONGEST.
        * language.h, c-lang.c, ch-lang.c, m2-lang.c, language.c: Remove
        longest_int and longest_unsigned_int.
        * value.h (struct value): Just align to LONGEST, rather than worrying
        about CC_HAS_LONG_LONG.
        * valarith.c (value_binop): Figure out type ourself based on
        sizeof (LONGEST) rather than relying on BUILTIN_TYPE_LONGEST.  The
        point is that we don't depend on CC_HAS_LONG_LONG anymore.
        * valprint.c (val_print_type_code_int): Just call
        extract_unsigned_integer directly, rather than going through
        unpack_long.
        * printcmd.c (decode_format): Remove code which would sometimes
        change 'g' size to 'w' for integers.  print_scalar_formatted handles
        printing huge integers well enough, thank you.

        * command.c (add_set_cmd, not_just_help_class_command): Change
        to make this the sfunc, not cfunc, since that is how we call it.
        * command.h: Comment difference between sfunc and cfunc.
        * demangle.c (set_demangling_command): Add third arg since that
        is how it is called.
        (_initialize_demangler): Use sfunc, not cfunc, for
        set_demangling_command, since that is how it is called.
        Remove show_demangling_command; it has no effect.

        * command.c (shell_escape): Report errors correctly (with error
        message from strerror).

Wed Feb  2 14:35:41 1994  Ian Lance Taylor  ([email protected])

        * xcoffread.c (read_xcoff_symtab): Change CSECT_LEN to use
        x_scnlen.l rather than x_scnlen to match corresponding change in
        coff/internal.h.

Wed Feb  2 11:16:45 1994  Jim Kingdon  ([email protected])

        * gdbtypes.h, ch-typeprint.c, ch-valprint.c:
        Change comments regarding TYPE_CODE_BOOL.
        * language.c (boolean_type): Always return 1 for TYPE_CODE_BOOL,
        regardless of the language.
        (value_true): Just call value_logical_not regardless of language.
        * coffread.c (coff_read_enum_type), stabsread.c (read_enum_type):
        Remove #if 0'd code which makes some enums TYPE_CODE_BOOL.
        * language.h: Improve comment for la_builtin_type_vector.
        * m2-lang.c (_initialize_m2_language): Don't add any fields to
        builtin_type_m2_bool.

Tue Feb  1 17:13:32 1994  Kevin Buettner ([email protected])

        * config/m88k/{tm-delta88.h,tm-delta88v4.h}, m88k-tdep.c:
        Define IN_SIGTRAMP and backtrace correctly through signal handlers.

Tue Feb  1 22:13:25 1994  Peter Schauer  ([email protected])

        * procfs.c (wait_fd):  Handle EINTR error return from PIOCWSTOP ioctl
        by restarting the ioctl.

Tue Feb  1 16:16:25 1994  Jim Kingdon  ([email protected])

        * target.h (target_wait): Add comment about calling
        return_to_top_level.

Tue Feb  1 12:21:00 1994  Ian Lance Taylor  ([email protected])

        * coffread.c (read_one_sym): bfd_coff_swap_aux_in now takes
        additional arguments.
        * xcoffread.c (read_xcoff_symtab, read_symbol_lineno): Likewise.

Mon Jan 31 16:10:41 1994  Stu Grossman  (grossman at cygnus.com)

        * sparc-stub.c:  Remove unnecessary #include of memory.h.

Mon Jan 31 12:12:34 1994  Jim Kingdon  ([email protected])

        * mips-tdep.c: Remove code which sets saved_regs from
        init_extra_frame_info and put it in new function mips_find_saved_regs.
        (READ_FRAME_REG): Remove macro and replace uses with the expansion.
        * mips-tdep.c, config/mips/tm-mips.h: When examining ->saved_regs,
        check if it is NULL and call mips_find_saved_regs if so.

        * remote-mips.c: Use unfiltered, not filtered, output most places.

        * blockframe.c (get_prev_frame_info): Detect and stop an infinite
        backtrace.  Revise comments.

Mon Jan 31 09:40:33 1994  Peter Schauer  ([email protected])

        * mdebugread.c (parse_procedure):  Remove _sigtramp kludges for
        alpha and irix. The _sigtramp case has to be handled properly
        in the tdep files if we have no ecoff debugging info.
        * alpha-tdep.c (alpha_frame_saved_pc, alpha_frame_chain),
        mips-tdep.c (mips_frame_saved_pc):  Handle signal handler frames
        without PC_REGNUM kludge.
        * mdebugread.c (fixup_sigtramp), mips-tdep.c (read_next_frame_reg):
        Clean up handling of mips sigtramp frames, improve comments.

Sat Jan 29 23:25:57 1994  Jeffrey A. Law  ([email protected])

        * paread.c (read_unwind_info): Fix typo.

        * paread.c (pa_symtab_read): Update the "check_strange_names"
        filter to match GCC's current output.  Filter out section symbols
        (which the HP linker sometimes puts in the wrong place).

Sat Jan 29 07:44:59 1994  Jim Kingdon  ([email protected])

        * serial.h (SERIAL_SET_TTY_STATE): Comment return value.

        * Makefile.in (TAGS): Just echo one line, rather than the whole thing.

        * Makefile.in: Remove all references to sparcly-nat.c.

        * Makefile.in (HFILES_NO_SRCDIR): Include dcache.h remote-utils.h
        remote-sim.h directly, rather than via $(remote_utils_h).  This avoids
        duplicating serial.h and target.h.

        * Makefile.in: Don't set M_INSTALL and M_UNINSTALL.  These variables
        are not used anywhere (a 5 Oct 1993 change removed the uses).

        * config/m68k/monitor.mt (TDEPFILE): Add remote-es.o.
        * config/m68k/es1800.mt: Add comment.
        * remote-es.c: Extensive changes to update to current conventions.

        * ser-unix.c (wait_for, hardwire_readchar) [HAVE_TERMIO, HAVE_TERMIOS]:
        If the timeout is too big to fit in c_cc[VTIME], then do multiple reads
        to achieve the desired timeout.
        * serial.h (serial_t): Add field timeout_remaining.

Fri Jan 28 08:45:02 1994  Jim Kingdon  ([email protected])

        * c-exp.y (yylex): Reenable nested type code.

Fri Jan 28 15:40:33 1994  Jim Kingdon  ([email protected])

        * a29k-tdep.c (examine_tag): Add comment regarding argcount.

        * remote-mips.c (mips_ops): Fix docstring.

        * remote-bug.c (bug_ops): Remove spurious newline from docstring.

        * config/m68k/tm-monitor.h: Changes to bring this into accordance
        with the old tm-m68k-em.h:
        (GDBINIT_FILENAME, DEFAULT_PROMPT): Remove.
        (HAVE_68881): Don't undefine; HAVE_68881 is obsolete.
        (REGISTER_NAMES): Don't muck with it; what tm-m68k.h has is fine.
        Add FIXME regarding GET_LONGJMP_TARGET.

        * remote-udi.c (udi_close, udi_detach, udi_kill): Add comments.
        * infptrace.c (kill_inferior): Add comments.
        * main.c (quit_command): Call target_close after we kill or
        detach.
        * remote-udi.c (udi_close): Don't error() if QUITTING.

Fri Jan 28 11:55:52 1994  Rob Savoye  ([email protected])

        * configure.in: Make m68k-coff and aout add monitor support in
        addition to the standard serial support.

Fri Jan 28 08:45:02 1994  Jim Kingdon  ([email protected])

        * mdebugread.c (psymtab_to_symtab_1): Don't complain on stLabel with
        index indexNil.

Fri Jan 28 10:40:34 1994  Jim Kingdon  ([email protected])

        * config/pa/tm-hppa.h: Define macro SMASH_TEXT_ADDRESS.
        * elfread.c (record_minimal_symbol_and_info),
        dwarfread.c (process_dies), paread.c (pa_symtab_read): Use it.

Thu Jan 27 15:12:23 1994  Jim Kingdon  ([email protected])

        * i386-stub.c: Add ".text" right before "mem_fault:".

        * main.c (baud_rate): Add FIXME comment about printing -1 value.

        * remote-utils.c (usage): Fix message to be accurate and conform
        more closely to normal conventions.

        * remote-utils.c (gr_files_info): Have the exec_bfd test control
        whether to show information about exec_bfd, and not control whether
        to show information about device and speed.

        * remote-utils.c (gr_open): If sr_get_device returns NULL, give
        usage message, don't dump core.

        * remote-bug.c (bug_write_memory): Use alloca, not GCC extension
        for variable size array.
        (bug_fetch_register, bug_store_register): Rename "value" to
        "fpreg_buf" because some compilers don't like variables whose
        names are the same as types.
        (bug_store_register): Use a cast when converting char * to
        unsigned char *.

        * symmisc.c (maintenance_print_symbols): Don't refer to the name
        of the command in error message (the text was referring to the old
        name of the command).

        * symmisc.c (dump_symtab): Fix args to fprintf_filtered.

        * c-typeprint.c (c_type_print_base): Have SHOW == 0 mean to print
        full details on structure elements without names.  This partially
        reverts the changes of 1 Jul 1993 and 31 Aug 1993; I think this aspect
        of those changes was accidental.

        * stack.c (parse_frame_specification): If SETUP_ARBITRARY_FRAME is
        defined, make it an error to specify a single argument which is not
        a frame number.

        * Makefile.in (version.c), main.c (print_gdb_version): Use
        host_alias and target_alias, not host_canonical and
        target_canonical, to print configuration.

Wed Jan 26 10:57:21 1994  Jim Kingdon  ([email protected])

        * parse.c (write_exp_msymbol): Use new type msymbol_addr_type instead
        of builtin_type_long.  It is necessary to get a type which is
        TARGET_PTR_BIT bits in size; builtin_type_long might not be big enough.

        Fix many sins which will come up in 32 bit x 64 bit GDB, and
        various miscellaneous things discovered in the process:
        * printcmd.c, defs.h (print_address_numeric): New function.
        * c-valprint.c (c_val_print), ch-valprint.c (chill_val_print)
        breakpoint.c (describe_other_breakpoints, breakpoint_1, mention),
        cp-valprint.c (cplus_print_value), infcmd.c (jump_command),
        printcmd.c, stack.c, symfile.c, symmisc.c, valprint.c:
        Use it.
        * utils.c, defs.h (gdb_print_address): New function.
        * expprint (dump_expression), gdbtypes.h: Use it.
        * breakpoint.c (describe_other_breakpoints),
        symmisc.c (dump_symtab, print_symbol):
        Use filtered not unfiltered I/O.
        (remove_breakpoints): Remove BREAKPOINT_DEBUG code.  Might as well
        just run gdb under a debugger for this (and it had problems with
        printing addresses, how to print b->shadow, etc.).
        * buildsym.c (make_blockvector), core.c (memory_error),
        exec.c (print_section_info), maint.c (print_section_table),
        mdebugread.c (parse_procedure), solib.c, source.c, symfile.c,
        symmisc.c, symtab.c, valops.c, valprint.c, xcoffexec.c:
        Add comments saying code is broken.  Marked with "FIXME-32x64".
        * dbxread.c (process_one_symbol), partial-stab.h (default),
        remote-vx.c (vx_run_files_info):
        Don't cast int being passed to local_hex_string.
        * symmisc.c (print_symbol): Don't cast long being passed to %lx.
        * symtab.h (general_symbol_info): Add comment about SYMBOL_VALUE
        only being a long.
        * symmisc.c (print_symbol): Print "offset" in message for LOC_ARG
        and LOC_LOCAL.
        * printcmd.c (print_address): Remove #if 0 code with ADDR_BITS_REMOVE.
        * source.c: Include <sys/types.h> regardless of USG.

Tue Jan 25 12:58:26 1994  Peter Schauer  ([email protected])

        * valops.c (value_assign):  Set `type' after coercing toval.
        * c-valprint.c (c_val_print), ch-valprint.c (chill_val_print):
        Use extract_unsigned_integer to get the address of a reference.

Tue Jan 25 11:31:53 1994  Jim Kingdon  ([email protected])

        * stabsread.c (STABS_CONTINUE, error_type), partial-stab.h:
        AIX can use ? instead of \ for continuation.  Deal with it.

        * paread.c (read_unwind_info): Just assign to objfile->obj_private,
        not OBJ_UNWIND_INFO.  Assigning to a cast is a GCC-ism which
        the HP compiler in ANSI mode doesn't like.

        * main.c: When defaulting HAVE_SIGSETMASK based on USG, just do it
        based on USG, rather than defining HAVE_SIGSETMASK to an
        expression containing defined.  Having a macro used in #if expand
        to an expression containing "defined" is undefined according to
        ANSI, and the HP compiler in ANSI mode doesn't do what we wanted
        it to.

Mon Jan 24 20:51:29 1994  John Gilmore  ([email protected])

        * sparc-nat.c (fetch_inferior_registers, store_inferior_registers):
        Clean up the changes of 11 Jan, as recommended by Peter Schauer.

Fri Jan 21 19:10:44 1994  Per Bothner  ([email protected])

        * ch-exp.y (match_string_literal):  Allow a zero-length string.
        * ch-lang.c (chill_printstr):  Don't print zero-length string funny.

Sat Jan 22 17:08:48 1994  Jim Kingdon  ([email protected])

        * i386aix-nat.c (i386_float_info): Reverse order of registers before
        passing them to print_387_status.
        (print_387_status): Don't subtract top from 7 before using it.
        * i387-tdep.c: Remove comment about AIX wanting "top" subtracted
        from 7; the above explains it.

Sat Jan 22 20:25:11 1994  Peter Schauer  ([email protected])

        * mips-tdep.c (init_extra_frame_info):  Use frame relative stack
        pointer value when fixing up the frame at the start of a function.

Sat Jan 22 12:29:13 1994  Stu Grossman  (grossman at cygnus.com)

        * lynx-nat.c (fetch_core_registers):  Load the I & L regs for the
        Sparc from the stack.

Sat Jan 22 08:30:42 1994  Jim Kingdon  ([email protected])

        * remote-mips.c (mips_initialize): Clear mips_initializing via
        cleanup chain, not directly.

        * ser-unix.c (wait_for) [HAVE_TERMIO, HAVE_TERMIOS]: Make a timeout
        of -1 mean forever, like in the HAVE_SGTTY case.  Warn if we are
        munging the timeout due to the limited range of c_cc[VTIME].

        * fork-child.c, inferior.h (fork_inferior): New argument shell_file.
        * procfs.c (procfs_create_inferior), inftarg.c (child_create_inferior),
        m3-nat.c (m3_create_inferior): Pass it.
        * procfs.c: Remove ptrace function.  It was declared in a way which
        conflicted with the prototype in unistd.h on Solaris.

Sat Jan 22 01:37:40 1994  Peter Schauer  ([email protected])

        * sparc-tdep.c (frame_saved_pc):  Get the pc from the saved pc
        in the sigcontext if it is a signal trampoline frame.
        * config/sparc/tm-sun4sol2.h (IN_SIGTRAMP, SIGCONTEXT_PC_OFFSET):
        Define for Solaris2.

Sat Jan 22 00:34:47 1994  Stu Grossman  (grossman at cygnus.com)

        * sparc-tdep.c, lynx-nat.c, config/sparc/tm-sparc.h,
        config/sparc/tm-sparclynx.h:  Move defs of FRAME_SAVED_I0/L0 to
        tm-sparc.h so they can be overridden if necessary.

Fri Jan 21 17:49:28 1994  Stu Grossman  (grossman at cygnus.com)

        * lynx-nat.c:  Add Sparc support.
        * sparcly-nat.c:  Remove.  It's useless.
        * config/sparc/nm-sparclynx.h:  Rewrite.
        * config/sparc/sparclynx.mh (NATDEPFILES):  Replace sparcly-nat.o
        with lynx-nat.o
        * config/sparc/tm-sparclynx.h:  Rewrite.

Fri Jan 21 19:08:48 1994  Ian Lance Taylor  ([email protected])

        * rs6000-pinsn.c: Use the new disassembler in the opcodes
        directory.  Old code was discarded, since the new opcode table has
        a different format.

Fri Jan 21 14:28:30 1994  Fred Fish  ([email protected])

        * Makefile.in (realclean):  Remove info files per make-stds.texi.

Fri Jan 21 12:47:53 1994  Jim Kingdon  ([email protected])

        * dbxread.c (end_psymtab): Only patch psymtab textlow and texthigh
        if N_SO_ADDRESS_MAYBE_MISSING is defined.
        * config/sparc/tm-sun4sol2.h: Define it.

Thu Jan 20 15:04:24 1994  Peter Schauer  ([email protected])

        * printcmd.c (print_address_symbolic):  Unconditionally use msymbol
        if we did not find a symbol.

Fri Jan 21 08:20:18 1994  Jeffrey A. Law  ([email protected])

        * infptrace.c (child_xfer_memory): Only use if CHILD_XFER_MEMORY
        is not defined.

        * hppab-nat.c (call_ptrace): Delete redundant function.
        (kill_inferior, attach, detach, child_resume): Likewise.
        (child_xfer_memory): Likewise.

        * hppah-nat.c (call_ptrace): Delete redundant function.
        (kill_inferior, attach, detach, child_resume): Likewise.

        * config/pa/hppabsd.mh (NATDEPFILES): Add infptrace.o.

        * config/pa/hppahpux.mh (NATDEPFILES): Add infptrace.o.

        * config/pa/nm-hppab.h (FETCH_INFERIOR_REGISTERS): Define.

        * config/pa/nm-hppah.h (FETCH_INFERIOR_REGISTERS): define.
        (CHILD_XFER_MEMORY): Define.
        (PT_*): Define so that generic infptrace.c code can be used.

Fri Jan 21 09:23:33 1994  Jim Kingdon  ([email protected])

        * xcoffread.c (xcoff_symfile_read): Make second parameter a
        struct section_offsets *, not a (nonexistent) struct section_offset *.

        * xcoffread.c (read_xcoff_symtab): Make main_aux just a union
        internal_xcoff_symtab, not an array of one of them.  Change lots of
        "main_aux" to "&main_aux" and so on.

        * coffread.c, xcoffread.c: Include <coff/internal.h>
        before "symfile.h".

Thu Jan 20 17:30:55 1994  Jim Kingdon  ([email protected])

        * coffread.c (coff_getfilename): Make it not static.

        * xcoffread.c (read_xcoff_symtab): complain() not abort().

        * xcoffread.c (struct coff_symbol): Rename c_nsyms to c_naux (removes
        a completely gratuitous difference between xcoffread.c and coffread.c).

Wed Jan 19 15:09:44 1994  Jim Kingdon  ([email protected])

        * infrun.c (wait_for_inferior): Don't set frame for
        step_resume_breakpoint for IN_SIGTRAMP cases.

        * infrun.c (wait_for_inferior), breakpoint.h (struct bpstat_what),
        breakpoint.c (bpstat_what): Move step_resume from its own field of
        the struct bpstat_what into the main_action.  Make it override
        other breakpoints.  This is a conservative change in the sense
        that before the step resume breakpoint was a breakpoint.c
        breakpoint, hitting the step resume breakpoint overrode even
        calling bpstat_stop_status.

Wed Jan 19 12:40:25 1994  Peter Schauer  ([email protected])

        * infrun.c (normal_stop):  Set stop_pc after popping the dummy frame
        in case execution was stopped in the called function.
        * stack.c (print_frame_info, frame_info):  If backtracing through
        a call dummy, handle the starting source line number on a line
        boundary like backtracing through sigtramp.
        * sparc-tdep.c (sparc_frame_find_saved_regs):  Get frame address
        for call dummy frame right.  Remove old test for dummy frame,
        it has been unused at least since gdb-3.5.
        * sparc-tdep.c (sparc_push_dummy_frame):  Set return address register
        of the dummy frame.

Tue Jan 18 16:16:35 1994  Jim Kingdon  ([email protected])

        * infcmd.c (signal_command): Accept 0 as legitimate signal number.

Tue Jan 18 14:09:25 1994  Peter Schauer  ([email protected])

        * infrun.c (signals_info), target.c (target_signal_from_name):
        Use ugly casts to avoid enumvar < enumvar or enumvar++.

Mon Jan 17 22:00:15 1994  Jim Kingdon  ([email protected])

        * ser-unix.c (hardwire_noflush_set_tty_state): Don't muck with ICANON.
        * inflow.c (terminal_ours_1): When discussing how to deal with the
        tty state, make note of query() as well as readline.

        * infrun.c (_initialize_infrun): Add TARGET_SIGNAL_POLL to list of
        signals for which stop and print are cleared by default.

Mon Jan 17 20:00:51 1994  Jeffrey A. Law  ([email protected])

        * config/pa/tm-hppa.h (unwind_table_entry): Use one of the
        reserved fields to hold a stub unwind entry type.  Fix typo.
        (stub_unwind_entry): New structure for raw stub unwind entries.
        (stub_unwind_types): The types of stubs we may encounter.
        (UNWIND_ENTRY_SIZE, STUB_UNWIND_ENTRY_SIZE): New defines.
        * hppa-tdep.c (rp_saved): Use additional information provided
        by linker stub unwind descriptors.
        (frameless_function_invocation): Likewise.
        (frame_chain_valid): Likewise.
        * paread.c (compare_unwind_entries): New function for sorting
        unwind table entries.
        (read_unwind_info): Rewrite to remove dependency on host endianness.
        Read in data from the $UNWIND_END$ subspace which contains linker
        stub unwind descriptors.  Merge that data into the basic unwind
        table.

        * hppab-nat.c (_initialize_kernel_u_addr): Delete unwanted functions.

Mon Jan 17 22:00:15 1994  Jim Kingdon  ([email protected])

        * xcoffread.c (read_xcoff_symtab, case C_FILE): Accept the name
        from either the symbol name or the auxent.
        * coffread.c, symfile.h (coff_getfilename): Renamed from getfilename,
        no longer static.

Mon Jan 17 13:35:01 1994  Fred Fish  ([email protected])

        * Makefile.in (ALLPARAM):  Change irix5.h to nm-irix5.h.

Mon Jan 17 12:35:42 1994  Peter Schauer  ([email protected])

        * README:  Update notes for alpha port.

Mon Jan 17 11:15:57 1994  Jim Kingdon  ([email protected])

        * i960-tdep.c (i960_fault_to_signal): Return TARGET_SIGNAL_ILL
        for operation fault, constraint fault, and type fault.

Sun Jan 16 12:46:01 1994  Jim Kingdon  ([email protected])

        * Makefile.in (init.c): Add comment explaining formatting conventions.

        * c-exp.y (parse_number): Assign to temporary between the right
        shifts, to work around a bug in the SCO compiler.

        * Makefile.in (ALLCONFIG, ALLPARAM, ALLDEPFILES, HFILES_NO_SRCDIR):
        Add various files which were added to GDB recently.

        * xcoffread.c (process_xcoff_symbol): Only change 'V' to 'S' if not
        within_function.

        * Makefile.in: Add mostlyclean target.

Sat Jan 15 10:20:13 1994  Jim Kingdon  ([email protected])

        * Version 4.11.4.

Sat Jan 15 18:27:34 1994  Per Bothner  ([email protected])

        * main.c (show_commands):  Make return type of extern
        history_get be HIST_ENTRY, rather than struct _hist_entry.
        (The latter loses with the upcoming merged readline.)

Sat Jan 15 10:20:13 1994  Jim Kingdon  ([email protected])

        * minsyms.c (prim_record_minimal_symbol_and_info): Make tempstring
        const char *, not char *.

        * symtab.h (struct symbol): Make section short, not unsigned short.

        * symtab.c (lookup_symbol): Add comment about QUIT here.

        * utils.c (fputs_unfiltered): Call fputs, not fputs_maybe_filtered.

        * c-exp.y (parse_number): Check for overflow regardless of range
        checking.  Fix overflow check to use unsigned LONGEST, not
        unsigned int.

        * c-exp.y (parse_number): Make it so that integer constants are
        builtin_type_long_long if builtin_type_long isn't big enough or if
        an "LL" suffix is used.  Properly handle "UL" or "LU" suffixes.

        * c-typeprint.c (c_type_print_varspec_suffix, case TYPE_CODE_FUNC):
        Print our "()" first, then recurse for the target type.

Fri Jan 14 21:55:39 1994  Jim Kingdon  ([email protected])

        * remote-udi.c (udi_create_inferior): Quote empty execfile argument.

        * gdbserver/low-lynx.c: Include <sys/wait.h> not "/usr/include/wait.h".

Fri Jan 14 14:17:06 1994  Jim Kingdon  ([email protected])

        * utils.c (request_quit): Re-establish signal handler regardless
        of USG.

        * config/mips/xm-irix4.h: Define HAVE_TERMIOS.

Fri Jan 14 21:55:39 1994  Jim Kingdon  ([email protected])

        * i960-tdep.c: Include target.h.

Fri Jan 14 17:12:28 1994  Stan Shebs  ([email protected])

        * lynx-nat.c (sys/wait.h): Don't use absolute pathname.

Fri Jan 14 11:06:10 1994  Jim Kingdon  ([email protected])

        * lynx-nat.c (child_wait): Fix thinkos in struct target_waitstatus
        changes (status -> ourstatus; declare status, etc.).
        * config/nm-lynx.h: Fix child_wait prototype and include target.h.

Fri Jan 14 14:17:06 1994  Jim Kingdon  ([email protected])

        * Makefile.in (ALLPARAM): Add config/nm-lynx.h.

Fri Jan 14 11:49:44 1994  Ian Lance Taylor  ([email protected])

        * remote-mips.c (mips_request, mips_wait): Correct prototypes.

Fri Jan 14 11:37:17 1994  Jim Kingdon  ([email protected])

        * config/i386/xm-linux.h: Define HAVE_TERMIOS.

Fri Jan 14 01:04:36 1994  Peter Schauer  ([email protected])

        * config/alpha/tm-alpha.h (CALL_DUMMY):  Improve comment.

Thu Jan 13 10:32:38 1994  Jim Kingdon  ([email protected])

        * remote-vx.c (vx_wait): Only call i960_fault_to_signal if I80960
        is defined.  Otherwise just report TARGET_SIGNAL_UNKNOWN.

        * mips-tdep.c (mips_push_arguments): Byteswap struct_addr before
        writing it.

        Add search to target vector (#if 0'd until after 4.12):
        * target.h (to_search, target_search): Add.
        * gdbcore.h, core.c (generic_search): Add.
        * remote.c (remote_search): Add.
        * a29k-tdep.c (init_frame_info): Use target_search to find traceback
        tag.

        * printcmd.c (print_address_symbolic): If set print fast-symbolic-addr
        is on, call find_pc_function rather than relying just on the minimal
        symbols (probably only matters for symbol readers which don't put
        statics in the minimal symbols, but changing this strikes me as
        not conservative enough).
        Initialize name_location in all cases.
        If no symbol and no msymbol, don't print anything symbolic.

        * a29k-tdep.c (push_dummy_frame): Add comment about saving lr0.

Wed Jan 12 20:53:16 1994  John Gilmore  ([email protected])

        * printcmd.c (print_address_symbolic):  Make it search the
        symtabs for variables as well as functions.  Add `set print
        fast-symbolic-addr' and default it to fast (the old way).
        Print line numbers for data items as well as functions.

        * symtab.c (find_addr_symbol):  Return the symtab and the symbol
        address, if a symbol is found (take two more args pointing to
        where to store these results).

        * symtab.h (find_addr_symbol):  Add prototype.

Wed Jan 12 19:32:11 1994  Jim Kingdon  ([email protected])

        * objfiles.h: Fix comments to reflect the fact that the phrase
        "top of stack" always refers to where the pushing and popping takes
        place, regardless of whether it is at the highest or lowest address.

Wed Jan 12 13:23:37 1994  Peter Schauer  ([email protected])

        * mdebugread.c (parse_symbol):  Do not set TYPE_TAG_NAME for
        compiler generated tag names.
        * mdebugread.c (parse_type):  Handle cross references to qualified
        aggregate types.
        * valops.c (value_struct_elt):  Improve error message if the
        address of a method is requested from an object instance.
        * valops.c (search_struct_method):  Make name_matched non-static
        to get it initialized correctly.
        * config/i386/nm-i386sco.h (CANNOT_STORE_REGISTER):  Define to
        exclude segment register which are not writable on newer SCO versions.

Wed Jan 12 14:44:45 1994  Jim Kingdon  ([email protected])

        * go32-xdep.c: Remove unused function uerror.
        (sigsetmask): Declare return type.  Declare argument (to match the
        way it is called).  Explicitly return 0.

Wed Jan 12 01:44:25 1994  John Gilmore  ([email protected])

        * symtab.h (struct symbol, general_symbol_info, minimal_symbol,
        partial_symbol):  Shrink the storage sizes of symbols, by making
        enums into 1-byte bitfields when compiled __GNUC__, moving all the
        enums and small ints to the end of each struct to improve
        alignment, and switching the section number from int to unsigned
        short.

Wed Jan 12 00:16:26 1994  John Gilmore  ([email protected])

        * symtab.c (find_addr_symbol):  New routine that will find the nearest
        symbol associated with an address.  It does so by exhaustive
        search of the symtabs, so it's slow but complete.

Tue Jan 11 23:57:30 1994  John Gilmore  ([email protected])

        * coffread.c (read_coff_symtab):  Set PC bounds of _globals_ symtab
        to [0,0] rather than [0, end of first source file].  This avoids
        problems with other parts of GDB looking for linetables in the
        _globals_ symtab.  Eliminate variables num_object_files and
        first_object_file_end.

Tue Jan 11 00:53:46 1994  John Gilmore  ([email protected])

        * a29k-tdep.c (init_frame_info):  Cast null arg to examine_tag.
        (pop_frame):  Restore PC2 and LR0 from dummy frames.
        (push_dummy_frame):  Save PC2 and LR0 into dummy frames.
        (setup_arbitrary_frame):  Handle 3 args and set up real frames.
        * config/a29k/tm-a29k.h (FRAME_NUM_ARGS):  Update comments.
        (DUMMY_FRAME_RSIZE):  Add 2 longwords for PC2 and LR0.
        (SETUP_ARBITRARY_FRAME):  Define.

Tue Jan 11 06:59:10 1994  Jim Kingdon  ([email protected])

        * infrun.c, config/mips/tm-irix5.h: Remove #if 0'd AT_FUNCTION_START.

Tue Jan 11 14:27:03 1994  Ian Lance Taylor  ([email protected])

        * remote-udi.c (udi_resume): Correct prototype.

Tue Jan 11 11:10:30 1994  Jeffrey A. Law  ([email protected])

        * config/pa/tm-hppa.h (FRAME_FIND_SAVED_REGS): Call
        hppa_frame_find_saved_regs.
        * hppa-tdep.c (dig_fp_from_stack): Delete function.
        (prologue_inst_adjust_sp): New function.
        (is_branch, inst_saves_gr, inst_saves_fr): New functions.
        (skip_prologue): Completely rewrite to use unwind information.
        (hppa_frame_find_saved_regs): Likewise.

Tue Jan 11 06:59:10 1994  Jim Kingdon  ([email protected])

        * remote-mips.c (mips_wait): Use new function mips_signal_from_protocol
        to convert a signal number with appropriate bounds checking.

        * remote-mips.c (mips_wait): Fix typos (0x177 -> 0177, 0x377 -> 0377).

Tue Jan 11 00:53:46 1994  John Gilmore  ([email protected])

        * stack.c (frame_info):  If FRAME_FIND_SAVED_REGS isn't defined,
        print a newline to end the display anyway.

        * sparc-tdep.c (sparc_pop_frame):  Pop the fsr and csr (float and
        coprocessor status regs) when popping a frame.  This fixes 
        float exceptions that occur after calling inferior functions.

        * sparc-nat.c (fetch_inferior_registers, store_inferior_registers):
        Read and write the fsr (float status register) to/from the child
        process along with the float regs.  Remove Peter Schauer's change
        of May 24 '93, which has higher overhead and doesn't solve the
        real problem (which was that FSR wasn't being set).

Mon Jan 10 23:16:42 1994  John Gilmore  ([email protected])

        * a29k-tdep.c (examine_prologue):  Don't worry if the ASGEQ
        stack overflow check isn't right after the register stack
        adjustment instruction.  Metaware R2.3u compiler moves other
        things in front of it.  This fix isn't perfect but is what's
        running.

Mon Jan 10 20:08:23 1994  Jim Kingdon  ([email protected])

        * c-valprint.c (c_val_print): Treat TYPE_CODE_RANGE like TYPE_CODE_INT.

        * config/alpha/alpha-netware.mt: Rename to alpha-nw.mt for 14
        character filenames.
        * configure.in: Change accordingly.

Mon Jan 10 15:48:36 1994  Tom Lord  ([email protected])

        * m68k-stub.c, sparc-stub.c: removed spurious introduction of 
        _filtered io routines from these two files.

Fri Jan  7 12:42:45 1994  Peter Schauer  ([email protected])

        * config/i386/tm-i386v.h, config/m68k/tm-m68k.h, config/mips/tm-mips.h,
        config/vax/tm-vax.h (CALL_DUMMY_BREAKPOINT_OFFSET):  Define.
        * mdebugread.c (parse_symbol):  Handle enum sh.type produced by
        DEC c89. 
        * mdebugread.c (add_line):  Handle zero linenos produced by DEC c89.

Fri Jan  7 12:55:25 1994  Jim Kingdon  ([email protected])

        * utils.c (print_sys_errmsg): Call gdb_flush (gdb_stdout) before
        printing to gdb_stderr.

        * remote-udi.c (udi_kill): Don't close the connection, just set
        inferior_pid to zero.
        (udi_mourn): Call remove_breakpoints.

        * remote-udi.c: Remove obsolete need_artificial_traps comment.

        * i386b-nat.c (sregmap): If sEAX, etc., not defined, use tEAX, etc.

Thu Jan  6 07:17:53 1994  Jim Kingdon  ([email protected])

        * symtab.c (lookup_symbol): Don't try adding .c to the name.

        * remote-bug.c: At the start of each section, reset srec_frame
        back to 160.

        * target.h: Add TARGET_WAITKIND_LOADED and TARGET_WAITKIND_SPURIOUS.
        * target.c (store_waitstatus): Add CHILD_SPECIAL_WAITSTATUS hook.
        * infrun.c (wait_for_inferior): Replace SIGTRAP_STOP_AFTER_LOAD with
        code which looks for those two waitkinds.  Use switch statement.
        * config/rs6000/tm-rs6000.h: Replace SIGTRAP_STOP_AFTER_LOAD with
        CHILD_SPECIAL_WAITSTATUS.

        * procfs.c (procfs_wait): Fix argument name to match 4 Jan changes.
        * Move target_signal_from_host, target_signal_to_host, and
        store_waitstatus from inftarg.c to target.c.  procfs needs them.
        * target.c: Include "wait.h" and <signal.h>.
        * target.h, infrun.c (proceed), proceed callers: Pass new code
        TARGET_SIGNAL_DEFAULT instead of -1.  This avoids problems with
        enums being treated as unsigned and is cleaner.
        * infrun.c (signals_info): Don't print TARGET_SIGNAL_DEFAULT or
        TARGET_SIGNAL_0.
        * infcmd.c (signal_command), infrun.c (signals_info):
        Don't allow user to specify numeric equivalent of
        TARGET_SIGNAL_DEFAULT.

Tue Jan  4 15:34:36 1994  Stu Grossman  ([email protected])

        * config/alpha/alpha-netware.mt:  New target support for Alpha
        running Netware.
        * configure.in:  Add alpha-*-netware* target.

Tue Jan  4 14:51:35 1994  Stan Shebs  ([email protected])

        * remote-mips.c (mips_wait): Fix ref to TARGET_WAITKIND_STOPPED.

Tue Jan  4 09:47:14 1994  Jim Kingdon  ([email protected])

        * target.h: Add enum target_waitkind, enum target_signal, and
        struct target_waitstatus.  Change status argument to target_wait to
        be struct target_waitstatus * instead of int *.
        * target.h, infrun.c, all targets: Change type of signal arguments
        to resume(), proceed(), and target_resume() from int to enum
        target_signal.
        * All targets (*_wait, *_resume): Change accordingly.
        * infcmd.c (program_info, signal_command), throughout infrun.c, 
        * fork-child.c, solib.c, hppa-tdep.c, osfsolib.c: Use this stuff.
        * convex-xdep.c, convex-tdep.c: Add FIXME's (getting the Convex
        signal code stuff right with the new signals would be non-trivial).
        * inferior.h (stop_signal): Make it enum target_signal not int.
        * target.c, target.h (target_signal_to_string, target_signal_to_name,
        target_signal_from_name): New functions.
        * inftarg.c, target.h (target_signal_to_host, target_signal_from_host,
        store_waitstatus): New functions.
        * procfs.c (procfs_notice_signals): Use them.
        * i960-tdep.c (i960_fault_to_signal): New function, to replace
        print_fault.
        * config/i960/tm-i960.h: Don't define PRINT_RANDOM_SIGNAL.

        * objfiles.c (build_objfile_section_table): Don't abort() if
        objfile->sections is already set.

        * objfiles.c (add_to_objfile_sections): Check SEC_ALLOC not SEC_LOAD
        to match recent change to exec.c.

        * Version 4.11.3.

        * main.c (print_gdb_version): Change year to 1994.

        * ChangeLog, ChangeLog-93: Split ChangeLog at 1994.
        * Makefile.in (NONSRC): Add ChangeLog-93.

Mon Jan  3 11:57:29 1994  Jim Kingdon  ([email protected])

        * stabsread.c (read_type): Allow defining several type numbers
        at once (e.g. "(1,2)=(3,4)="...).

        * stabsread.c (read_enum_type): Use TARGET_INT_BIT not sizeof (int).

        * breakpoint.c (frame_in_dummy): Check PC as well as frame.

Mon Jan  3 02:47:03 1994  Peter Schauer  ([email protected])

        * mdebugread.c (psymtab_to_symtab_1):  Only pass N_STAB symbols
        to process_one_symbol.
        * symtab.c (find_pc_psymbol):  Search global_psymbols as well to
        avoid caching a bad endaddr in find_pc_partial_function.

Sun Jan  2 21:41:17 1994  Jim Kingdon  ([email protected])

        * config/m68k/tm-sun3.h: Don't define BELIEVE_PCC_PROMOTION.

Sat Jan  1 04:35:23 1994  Peter Schauer  ([email protected])

        * infrun.c (wait_for_inferior):  Do not step or step resume past
        the end of a one-line function we just stepped into.

For older changes see ChangeLog-93
\f
Local Variables:
mode: indented-text
left-margin: 8
fill-column: 74
version-control: never
End: