3 * doc/as.texinfo (Section): Document 's' flag for COFF version.
7 * config/obj-coff.c (obj_coff_section): Handle 's' (shared)
12 * configure.in: Define and substitute GDBINIT. Change AC_OUTPUT
13 line to crate ${GDBINIT} rather than .gdbinit.
14 * configure, Makefile.in, doc/Makefile.in: Rebuild.
18 * config/tc-hppa.c (pa_ip, case '?'): Add missing break.
22 * config/tc-hppa.c (pa_ip): Add 64 bit condition completers.
26 * config/tc-sparc.h (tc_fix_adjustable): Fix check for PIC local
27 non-adjustable symbols.
31 * config/tc-hppa.c (pa_ip): Change condition args to have '?' prefix.
35 * config/tc-sh.c (md_assemble): Call as_bad when there are excess
40 * config/te-interix.h: New file.
41 * configure.in (i386-*-interix*): New target.
46 * config/tc-hppa.c (pa_chk_field_selector): Allow 3 byte
47 selectors for ELF too.
48 (selector_table): Add "ltp" and "rtp" selectors.
52 * config/tc-i386.c (i386_operand): No need to change
53 operand_string pointer in segment reg case before goto
54 do_memory_reference. Initialise displacement_string_start and
55 displacement_string_end after do_memory_reference label.
56 (i386_index_check): Add operand_string param, and print error
57 message on failure here.
58 (i386_intel_memory_operand): Instead of here.
59 (i386_operand): And here.
60 (INFER_ADDR_PREFIX): Enable.
62 * doc/c-i386.texi (i386-16bit): Document .code16gcc.
64 * config/tc-i386.h (DefaultSize): Define. Renumber following
65 opcode_modifier defines.
68 * config/tc-i386.c (stackop_size): New variable.
69 (set_16bit_code_flag): Clear it here.
70 (set_16bit_gcc_code_flag): New function.
71 (md_pseudo_table): Add "code16gcc" entry.
72 (md_assemble): Set i.suffix for insns with DefaultSize modifier.
76 * config/obj-coff.c (coff_frob_symbol): Always update set_end with
77 next_set_end even if the end symbol is being discarded.
79 * gasp.c: Add ATTRIBUTE_UNUSED as needed for non-BFD_ASSEMBLER.
80 * output-file.c, symbols.c, config/tc-i386.c: Likewise.
81 * config/obj-coff.c: Likewise.
82 (seg_info_type): Remove.
83 (seg_info_off_by_4): Change to array of segT.
84 (s_get_segment): Adjust accordingly.
85 (obj_pseudo_table): Fully initialize sentinel entry.
87 * config/tc-mips.c (append_insn): Correct INSN_SYNC test. From
92 * config/tc-i386.c (f16_3): New. Fixes 16 bit 3 byte nop.
96 * config/tc-i386.c: Indentation and white space changes.
97 (i386_index_check): New function. Add INFER_ADDR_PREFIX code, but
98 don't enable it by default.
99 (i386_intel_operand): Remove redundant prototype.
100 Move check on number of memory operands, and i.mem_operands++
101 (i386_intel_memory_operand): To here.
102 Remove i386_immediate code from here. Remove special case code
103 for input and output using (%dx). Remove base/index checks and
104 call i386_index_check instead. Save initial operand_string
105 argument for error message.
106 (i386_operand): Remove redundant prototype. Move base/index
107 checks to i386_index_check.
108 (i386_displacement): Move intel mode check for non-zero
110 (i386_intel_memory_operand): To here.
114 * config/tc-sparc.c (md_longopts): Add --no-undeclared-regs option.
115 (sparc_ip): Warn if %g2 or %g3 register is used and not covered
116 by .register pseudo-op if -64 and --no-undeclared-regs.
117 (s_register, sparc_adjust_symtab): New functions.
118 * config/tc-sparc.h (tc_adjust_symtab, sparc_adjust_symtab):
119 Declare sparc_adjust_symtab as tc_adjust_symtab.
120 * doc/c-sparc.texi: Add description of #ignore special literal
121 for .register pseudo-op.
125 * config/tc-arm.c (tc_gen_reloc): Record the vtable entry in
126 the relocation's section offset.
130 * write.c (fixup_segment): Fix generic error check overflow test.
132 * config/tc-i386.c (pe): Change %d to %ld, %x to %lx, and cast
133 X_add_number to long.
137 * config/tc-hppa.c (pa_ip): Add 'J' and 'K' code
142 * config/tc-sparc.h (tc_fix_adjustable): Don't adjust GOT, PLT, or
147 * config/te-go32.h (COFF_LONG_SECTION_NAMES): Define.
149 * configure.bat: Remove; obsolete.
150 * config/go32.cfg: Likewise.
154 * configure.in (i386-*-vxworks*): New target.
155 * configure: Rebuild.
159 * doc/c-sparc.texi: Document .register and .nword pseudo-ops.
163 * config/tc-sparc.c (sparc_ip): Allow OLO10 relocations
165 (output_insn): Put OLO10's secondary addend into tc_fix_data.
166 (md_apply_fix3): Handle BFD_RELOC_SPARC_OLO10.
167 (tc_gen_reloc): Return two relocs for OLO10, LO10 and SPARC13.
168 * config/tc-sparc.h (RELOC_EXPANSION_POSSIBLE,
169 MAX_RELOC_EXPANSION): Define.
170 (TC_FIX_TYPE, TC_INIT_FIX_DATA, TC_FIX_DATA_PRINT): Likewise.
174 * config/tc-i386.c (intel_float_operand): Add prototype, make static.
175 (md_assemble): Localize *exp variable to if (fake_zero_displacement)
176 block. Print a warning if an 8-bit or 16-bit constant
177 displacement or immediate is truncated on output.
178 (i386_immediate): Ensure Imm16 is always legal for a 16-bit mode
180 (i386_operand): Disallow immediate jump absolute operand.
184 * configure.in: Bump version number to 2.9.5.
185 * configure: Rebuild.
187 * dwarf2dbg.c (dwarf2_gen_line_info): Don't assume that long long
192 * config/tc-hppa.c (md_pseudo_table): Add ".dword" pseudo-op.
193 (cons_fix_new_hppa): Derive size of fixup from size of the object.
197 * symbols.c (dollar_label_name): Prepend LOCAL_LABEL_PREFIX if it
199 * config/tc-arm.h (LOCAL_LABEL_PREFIX): Define to '.' for ELF.
201 * config/tc-arm.c (md_begin): Set F_SOFTFLOAT in the output file
202 if -mno-fpu was given.
203 (tc_gen_reloc): Fix typo. Delete bogus code related to GOTPC
205 (cons_fix_new_arm): Remove misleading comments.
209 * write.c (cvt_frag_to_fill): Use frag file and line in rs_org
211 (relax_segment): Likewise. After giving a rs_org error, convert
212 the frag to rs_align to avoid cascading errors.
216 * config/tc-m68k.c: Add some ATTRIBUTE_UNUSED.
220 * Many files: Changes to avoid gcc warnings: Add ATTRIBUTE_UNUSED
221 as appropriate. Fill in structure initializations. Add variable
222 initializations. Add casts.
223 * dwarf2dbg.c (print_stats): Change i to size_t.
224 * listing.c (listing_listing): Change list_line to unsigned int.
228 * config/tc-ppc.h (tc_fix_adjustable) [OBJ_ELF]: Call S_IS_LOCAL
229 rather than checking for \001 and \002 in symbol name.
230 * config/tc-sparc.h (tc_fix_adjustable) [OBJ_ELF]: Likewise.
234 * configure.in (hppa*-linux-gnu*): New target.
235 * configure: Rebuilt.
239 * doc/c-arm.texi (ARM Directives): Document .thumb_set directive.
243 * config/tc-v850.c (v850_comm): Use symbol_get_obj() rather than
244 accessing symbolP directly.
248 * config/tc-hppa.h (tc_frob_symbol): Always punt "$global$" symbol
253 * config/tc-arm.c (ARM_EXT_V5): Define.
254 (ARM_ARCH_V5, ARM_ARCH_V5T): Define.
255 (md_begin): Detect ARM v5 architectures.
256 (md_parse_option): Accept arm v5 specification.
257 (md_show_usage): Documment -marmv5 switch.
259 * doc/c-arm.texi: Document -marmv5 command line option.
261 * config/tc-arm.c (do_adrl): New function. Implement ADRL pseudo
263 (validate_immediate_twopart): New function. Determine if a
264 constant can be computed by two ADD instructions.
265 (output_inst): Remove its command line parameter - it was never
267 (md_apply_fix3): Support BFD_RELOC_ARM_ADRL_IMMEDIATE, used to
268 implememt the ADRL pseudo op.
269 (tc_gen_reloc): Generate a suitable error message if an ADRL
270 instruction tries to generate a real reloc.
272 * doc/c-arm.texi: Document NOP, ADR and ADRL pseudo ops.
276 * config/tc-hppa.c (pa_ip): Convert the opcode and all completers
281 * subsegs.c (subseg_text_p): Use 1/0 instead of true/false for
282 non BFD_ASSEMBLER case.
286 * config/obj-coff.c (obj_coff_section): Mark writable sections as
291 * dwarf2dbg.c (dwarf2_gen_line_info): Don't call
292 out_end_sequence() when the address decreases due to a new frag.
293 (gen_dir_list): Set ls.file[i].dir to j + 1 (not j) because file
294 numbering starts with 1.
298 * config/tc-mcore.c (md_pseudo_table): Add .comm for ELF and allow
300 (mcore_s_text): Call obj_elf_text for ELF target.
301 (mcore_s_data): Call obj_elf_data for ELF target.
302 (mcore_s_section): No longer ELF specific. Call obj_coff_section
304 (mcore_s_bss): New function: Dump literal table before changing
306 (mcore_s_comm): New function: Dump literal table before changing
309 * config/obj-elf.c (obj_elf_common, obj_elf_data, obj_elf_text):
310 No longer static functions.
311 * config/obj-elf.h (obj_elf_common, obj_elf_data, obj_elf_text):
312 Provide prototypes for these functions.
316 * subsegs.c (subseg_text_p): Rewrite non BFD_ASSEMBLER case to use
317 a list of names, to try obj_segment_name, and to try abbreviated
318 names when using COFF without long section names.
320 * config/tc-alpha.c: More use of symbol accessor functions.
321 * config/tc-arc.c: Likewise.
322 * config/tc-d30v.c: Likewise.
323 * config/tc-fr30.c: Likewise.
324 * config/tc-i860.c: Likewise.
325 * config/tc-m88k.c: Likewise.
326 * config/tc-mcore.c: Likewise.
327 * config/tc-ns32k.c: Likewise.
328 * config/tc-sparc.c: Likewise.
329 * config/tc-v850.c: Likewise.
331 * config/tc-arc.c (get_arc_exp_reloc_type): Change uses of
332 sy_value with appropriate accessor functions.
333 * config/tc-arm.c (md_apply_fix3): Likewise.
334 * config/tc-d10v.c (AT_WORD_P): Likewise.
335 * config/tc-v850.c (reg_name_search): Likewise.
337 * config/obj-ecoff.c (obj_ecoff_set_ext): Change uses of bsym to
338 use symbol_get_bfdsym instead.
339 * config/tc-ppc.c (md_assemble): Likewise.
340 * config/tc-v850.c (v850_comm): Likewise.
344 * config/tc-arc.c (tc_gen_reloc): Use symbol_get_bfdsym to get at
345 the symbol, rather than accessing the bsym member.
346 * config/tc-d10v.c (tc_gen_reloc): Likewise.
347 * config/tc-d30v.c (tc_gen_reloc): Likewise.
348 * config/tc-mcore.c (tc_gen_reloc): Likewise.
349 * config/tc-mn10200.c (tc_gen_reloc): Likewise.
350 * config/tc-mn10300.c (tc_gen_reloc): Likewise.
351 * config/tc-ns32k.c (tc_gen_reloc): Likewise.
352 * config/tc-tic30.c (tc_gen_reloc): Likewise.
353 * config/tc-v850.c (tc_gen_reloc): Likewise.
357 * tc-hppa.c (elf_hppa_reloc_type): Renamed from elf32_hppa_reloc_type.
358 (hppa_gen_reloc_type): Conditionalize on BFD64.
359 (tc_gen_reloc): Re-enable ELF relocations.
360 * tc-hppa.h (TARGET_FORMAT): Handle elf64-hppa format.
364 * config/tc-arm.c (ldst_extend): Add parentheses to avoid
366 (do_ldst): Move assignment out of if condition.
367 (md_apply_fix3): Add casts to avoid printf format warnings. Add
368 parentheses to avoid warning.
372 * config/tc-arm.c (arm_adjust_symtab): Use symbol_get_bfdsym()
373 macro to get at the BFD symbol associated with a GAS symbol.
377 * config/tc-ppc.c: Update for symbol handling changes.
378 * config/obj-coff.c: Likewise.
382 * tc-hppa.c: General cleanups of ELF support. No more spaces
383 and subspaces for ELF.
384 (GDB_DEBUG_SPACE_NAME): Delete definition for ELF.
385 (GDB_STRINGS_SUBSPACE_NAME): Likewise.
386 (GDB_SYMBOLS_SUBSPACE_NAME): Likewise
387 (UNWIND_SECTION_NAME): Likewise.
388 (space/subspace related structures): Conditionalize definitions
390 (space/subspace directives and support routines): Conditionalize
391 definitions and references/uses on OBJ_SOM.
392 (label_symbol_struct): For ELF, track the symbol's segment. For
394 (pa_define_label, pa_undefine_label, pa_get_label): Corresponding
396 (USE_ALIASES): Kill for both SOM & ELF.
397 (pa_def_subspaces, pa_def_spaces): Corresponding changes.
398 (pa_space, pa_subspace): Corresponding changes.
399 (pa_spaces_begin): Corresponding chagnes.
400 (md_begin): Do not muck around with space/subspace stuff for
402 (md_apply_fix): Temporarily disable argument relocation stuff
404 (tc_gen_reloc): Temporarily disable relocation generation for
406 (pa_build_unwind_subspace): Similarly.
410 * config/tc-arm.c (thumb_set): New pseudo op.
411 (text, data, section): Override these pseudo ops with ARM
413 (s_thumb_set): New function: Perform the same as a .set pseudo
414 op, but also mark the alias'ed symbol as being a Thumb
416 (arm_s_text): New function: Perform the same as the .text
417 pseudo op, but dump the literal pool before changing
419 (arm_s_data): New function: Perform the same as the .data
420 pseudo op, but dump the literal pool before changing
422 (arm_s_section): New function: Perform the same as the
423 .section pseudo op, but dump the literal pool before changing
425 (arm_cleanup): Do not reset the current section before dumping
430 * config/tc-m32r.c (md_longopts): Fix OPTION_WARN_UNMATCHED and
431 OPTION_NO_WARN_UNMATCHED entries.
432 (md_parse_option): Generate a warning message if an unrecognised
433 option is encountered.
435 * config/tc-d10v.c (do_not_ignore_hash): New variable.
436 (get_operands): When parsing an expression after an '@' symbol
437 has been detected, do not ignore '#' symbols.
438 (md_operand): Only ignore '#' symbols if do_not_ignore_hash is
444 * configure.in (ppc-*-vxworks*): New target.
445 * configure: Rebuild.
449 * config/tc-arm.c (tc_gen_reloc): Fix handling of GOTPC relocs.
453 * write.c (adjust_reloc_syms): Rather than never reducing reloc
454 which refer to symbols in linkonce sections, permit reducing the
455 relocs if the symbol is local.
459 * subsegs.c (subseg_text_p): New function.
460 * as.h (subseg_text_p): Declare.
461 * read.c (do_align): Use subseg_text_p to set the default fill.
462 * write.c (subsegs_finish): Likewise.
463 * config/obj-coff.c (write_object_file): Likewise.
464 * config/tc-i386.h (md_maybe_text): Don't define.
465 (md_do_align): Use subseg_text_p to set the default fill.
466 * config/tc-m32r.c (m32r_do_align): Likewise.
467 * config/tc-sh.c (sh_do_align): Likewise.
468 * config/tc-sparc.h (md_do_align): Likewise.
472 * configure.in: (i[3456]86-*-freebsd*): Now defaults to ELF.
473 * configure: Rebuild.
477 * dwarf2dbg.c: Include elf/dwarf2.h with "", not <>.
478 * Makefile.am: Rebuild dependencies.
479 * Makefile.in: Rebuild.
481 * config/tc-i386.c (i386_immediate): Remove unused label
484 * struc-symbol.h: Put local_symbol code in ifdef BFD_ASSEMBLER.
485 * symbols.c: Likewise.
486 * config/obj-aout.c (obj_crawl_symbol_chain): Refer directly to
487 sy_next field when taking address, rather than symbol_next.
489 * dwarf2dbg.c: Change bfd_vma to addressT and bfd_signed_vma to
491 (out_set_addr): Don't use BYTES_PER_ADDRESS. Instead, get the
492 value from the output file architecture.
493 (dwarf2_gen_line_info): Ifdef BFD_ASSEMBLER specific code.
494 * dwarf2dbg.h: Change bfd_vma to addressT.
498 * dwarf2dbg.h: Use PARAMS in function declarations.
502 * write.c (fixup_segment): Don't add symbol value for i960 ELF.
503 * config/tc-i960.c (s_leafproc): Don't call tc_set_bal_of_cal if
505 (md_apply_fix): Simplify BFD_ASSEMBLER handling.
509 * config/tc-i386.c (md_apply_fix3): Add default case to switch.
511 * config/tc-sparc.c (md_pseudo_table): Remove pushsection and
514 * config/tc-sparc.c (sparc_ip): Add default case to reloc switch.
516 * read.c (read_a_source_file): Only declare inescape if
519 * itbl-ops.c (itbl_disassemble): Change sprintf format strings to
521 (find_entry_byval): Add parens to avoid warning.
523 * as.c: If HAVE_ITBL_CPU, include "itbl-ops.h".
525 * symbols.c (resolve_symbol_value): Don't permit subtraction of
530 * config/tc-sparc.c (sparc_ip): Don't use side-effect expression
533 * config/tc-sparc.c (synthetize_setuw, synthetize_setsw,
534 synthetize_setx): New functions.
535 (md_assemble): Broken the special cases into the above
536 functions. Make compiler happy if sizeof(bfd_vma)==4.
537 Fix sethi generated from set/setuw. If instructions have a relloc,
538 always clear the fields to be relocated in the opcode.
539 (sparc_ip): Remove special_case global variable.
544 * itbl-ops.c (itbl_get_reg_val): Add pval parameter. Return
545 indication of success rather than a value.
546 (itbl_get_val): Likewise.
547 (itbl_get_field): Use strcspn. Change delimiters to include
549 * itbl-ops.h (itbl_get_reg_val): Update declaration.
550 (itbl_get_val): Likewise.
551 * config/tc-mips.c (mips_ip): Update call to itbl_get_reg_val.
553 * symbols.c (copy_symbol_attributes): Convert local symbols to
558 * config/tc-arm.c (md_parse_option): Add support for ARM920 and
563 * config/tc-sparc.c (md_assemble): Fix up setx, support setsw.
564 Optimize set if sizeof(bfd_vma) == 64.
565 (sparc_ip): Fix sethi - without %hi() it should generate
566 R_SPARC_22 reloc, not R_SPARC_HI22.
567 (tc_gen_reloc): Handle BFD_RELOC_SPARC22.
571 * config/tc-sparc.c (md_begin): Handle native wordsize aliases.
572 (s_ncons): New function.
573 (native_op_table): New table.
574 (sparc_ip): Be more strict on %hi() etc.; prepare assembler for
575 R_SPARC_OLO10 handling.
579 * expr.h (struct expressionS): Revert last change; widen X_op.
580 * config/tc-alpha.c (md_begin): Check the field is wide enough.
584 * Makefile.am (TARGET_CPU_CFILES): Add config/tc-fr30.c.
585 (TARGET_CPU_HFILES): Add config/tc-fr30.h.
586 (TARG_ENV_HFILES): Add config/te-epoc-pe.h.
587 * Makefile.in: Regenerated.
589 * config/obj-elf.c (obj_elf_common): In MRI mode if called as
590 `common' pass on to s_mri_common.
591 (elf_pseudo_table): Pass 1 to obj_elf_common for `common'.
595 * config/obj-elf.c (obj_elf_section): Don't free the return
596 value of demand_copy_C_string.
600 * dwarf2dbg.c (dwarf2_gen_line_info): Mirror the section symbol
601 creation logic from obj_elf_create_section.
603 * config/obj-elf.c (elf_pseudo_tab): Add pushsection/popsection.
604 (section_stack): New.
605 (special_sections): Make const.
606 (obj_elf_section): Gut and rewrite parsing.
607 (obj_elf_change_section): New function broken out of obj_elf_section.
608 (obj_elf_parse_section_letters): Likewise.
609 (obj_elf_section_word): Likewise.
610 (obj_elf_section_type): Likewise.
611 (obj_elf_previous): Treat as a toggle.
612 (obj_elf_popsection): New.
613 * config/tc-ppc.c (ppc_section_word): Take str+len not ptr_str.
614 (ppc_section_type): Likewise.
615 * config/tc-ppc.h: Likewise.
617 * expr.h (struct expressionS): Don't make X_op a bitfield.
618 * config/tc-alpha.c: Update for symbol handling changes.
619 (md_apply_fix) [case GPREL]: Use now_seg instead of absolute_section.
620 (load_expression, emit_ir_load, emit_loadstore, emit_jsrjmp): Likewise.
624 * dwarf2dbg.c (*): Convert to K&R + prototypes.
625 (dwarf2_gen_line_info): Kill unused variables.
626 (dwarf2_finish): Likewise.
627 (dwarf2_where): Likewise.
628 (dwarf2_directive_file): If we've only got a string,
629 hand off to s_app_file.
630 * ecoff.c: Move the include of ecoff.h.
631 * symbols.h (S_IS_FUNCTION): Prototype.
633 * read.c (LEX_HASH): Supply a default.
635 (s_globl): Update `c' after skipping whitespace.
636 * read.h (LEX_END_NAME, is_name_ender): New.
637 * expr.c (get_symbol_end): Respect it.
641 * config/tc-hppa.c (md_begin): Convert local symbol dummy_symbol
643 (tc_gen_reloc): Still need bfd_abs_symbol in some relocs.
645 * config/tc-hppa.c: Update for symbol handling changes.
649 * cgen.c: Update for symbol handling changes.
650 * config/tc-m32r.c: Likewise.
652 * config/tc-hppa.h: Update for symbol handling changes.
653 * config/tc-hppa.c: Likewise.
655 * config/tc-arm.h: Update for symbol handling changes.
656 * config/tc-arm.c: Likewise.
657 (symbol_make_empty): Remove. Just use symbol_create.
659 * symbols.c (symbol_set_tc): Correct name.
661 * Makefile.am: Rebuild dependencies.
662 ($(OBJS)): Don't depend upon struc-symbol.h.
663 (.dep1, .tcdep, .objdep): Create itbl-parse.h.
664 * dep-in.sed: Don't remove struc-symbol.h.
665 * Makefile.in: Rebuild.
667 * doc/internals.texi (Symbols): Describe changes in symbol
672 * dwarf2dbg.c (dwarf2_gen_line_info): Use section_symbol
673 instead of doing the work by hand.
677 * dwarf2dbg.c (INITIAL_STATE): New macro encapsulating initial
678 state of line state-machine.
679 (struct ls): Collect DWARF2 line state-machine state in new member
680 SM. Add member EMPTY_SEQUENCE to keep track if a code sequence
681 resulted in any DWARF2 directives.
682 (reset_state_machine): New function.
683 (out_end_sequence): Ditto.
684 (dwarf2_gen_line_info): When switching sections or switching to a
685 lower text address, call out_end_sequence() first to terminate the
686 previous code sequence as code sequences MUST have monotonically
687 increasing addresses.
688 (dwarf2_finish): Call out_end_sequence() instead of open coding it.
692 * as.c (parse_args): Add option -gdwarf2 to allow requesting
693 DWARF2 debug info (line information only, at this point).
694 * as.h: Update comment about supported debug formats.
695 * dwarf2dbg.c, dwarf2dbg.h: New files.
696 * Makefile.am (GAS_CFILES, HFILES, GENERIC_OBJS): Add them.
698 * expr.c (operand): Don't use [ for parens if we want an index op.
699 (op_encoding): Switch [ into O_index, if desired.
700 (op_rank): Renumber with O_index on bottom.
701 (expr): If O_index, match closing bracket.
702 * expr.h (O_index): New.
704 * read.c (read_a_source_file): Conditionally allow matched "
705 in lines passed to md_assemble.
707 * config/obj-elf.c (elf_pseudo_table): Add `common'.
711 Add support for storing local symbols in a small structure to save
712 memory when assembling large files.
713 * as.h: Don't include struc-symbol.h.
714 (symbolS): Add typedef.
715 * symbols.c: Include struc-symbol.h.
716 (local_hash): New static variable.
717 (save_symbol_name): New static function, from symbol_create.
718 (symbol_create): Call save_symbol_name.
719 (local_symbol_count): New static variable.
720 (local_symbol_conversion_count): Likewise.
721 (LOCAL_SYMBOL_CHECK): Define.
722 (local_symbol_make): New static function.
723 (local_symbol_convert): New static function.
724 (colon): Handle local symbols. Create local symbol for local
726 (symbol_table_insert): Handle local symbols.
727 (symbol_find_or_make): Create local symbol for local label name.
728 (symbol_find_base): Check for local symbol.
729 (symbol_append, symbol_insert): Check for local symbols.
730 (symbol_clear_list_pointers, symbol_remove): Likewise.
731 (verify_symbol_chain): Likewise.
732 (copy_symbol_attributes): Likewise.
733 (resolve_symbol_value): Handle local symbols.
734 (resolve_local_symbol): New static function.
735 (resolve_local_symbol_values): New function.
736 (S_GET_VALUE, S_SET_VALUE): Handle local symbols.
737 (S_IS_FUNCTION, S_IS_EXTERNAL, S_IS_WEAK, S_IS_COMMON): Likewise.
738 (S_IS_DEFINED, S_IS_DEBUG, S_IS_LOCAL, S_GET_NAME): Likewise.
739 (S_GET_SEGMENT, S_SET_SEGMENT, S_SET_EXTERNAL): Likewise.
740 (S_CLEAR_EXTERNAL, S_SET_WEAK, S_SET_NAME): Likewise.
741 (symbol_previous, symbol_next): New functions.
742 (symbol_get_value_expression): Likewise.
743 (symbol_set_value_expression): Likewise.
744 (symbol_set_frag, symbol_get_frag): Likewise.
745 (symbol_mark_used, symbol_clear_used, symbol_used_p): Likewise.
746 (symbol_mark_used_in_reloc): Likewise.
747 (symbol_clear_used_in_reloc, symbol_used_in_reloc_p): Likewise.
748 (symbol_mark_mri_common, symbol_clear_mri_common): Likewise.
749 (symbol_mri_common_p): Likewise.
750 (symbol_mark_written, symbol_clear_written): Likewise.
751 (symbol_written_p): Likewise.
752 (symbol_mark_resolved, symbol_resolved_p): Likewise.
753 (symbol_section_p, symbol_equated_p): Likewise.
754 (symbol_constant_p): Likewise.
755 (symbol_get_bfdsym, symbol_set_bfdsym): Likewise.
756 (symbol_get_obj, symbol_set_obj): Likewise.
757 (symbol_get_tc, symbol_set_tc): Likewise.
758 (symbol_begin): Initialize local_hash.
759 (print_symbol_value_1): Handle local symbols.
760 (symbol_print_statistics): Print local symbol statistics.
761 * symbols.h: Include "struc-symbol.h" if not BFD_ASSEMBLER.
762 Declare new symbols.c functions. Move many declarations here from
764 (SYMBOLS_NEED_BACKPOINTERS): Define if needed.
765 * struc-symbol.h (SYMBOLS_NEED_BACKPOINTERS): Don't set.
766 (struct symbol): Move bsym to make it clearly the first field.
767 Remove TARGET_SYMBOL_FIELDS.
768 (symbolS): Don't typedef.
769 (struct broken_word): Remove.
770 (N_TYPE_seg, seg_N_TYPE): Move to symbol.h.
771 (SEGMENT_TO_SYMBOL_TYPE, N_REGISTER): Likewise.
772 (symbol_clear_list_pointers): Likewise.
773 (symbol_insert, symbol_remove): Likewise.
774 (symbol_previous, symbol_append): Likewise.
775 (verify_symbol_chain, verify_symbol_chain_2): Likewise.
776 (struct local_symbol): Define.
777 (local_symbol_converted_p, local_symbol_mark_converted): Define.
778 (local_symbol_resolved_p, local_symbol_mark_resolved): Define.
779 (local_symbol_get_frag, local_symbol_set_frag): Define.
780 (local_symbol_get_real_symbol): Define.
781 (local_symbol_set_real_symbol): Define.
783 * write.c (write_object_file): Call resolve_local_symbol_values.
784 * config/obj-ecoff.h (OBJ_SYMFIELD_TYPE): Define.
785 (TARGET_SYMBOL_FIELDS): Don't define.
786 * config/obj-elf.h (OBJ_SYMFIELD_TYPE): Add local field. If
787 ECOFF_DEBUGGING, add ECOFF fields.
788 (ELF_TARGET_SYMBOL_FIELDS, TARGET_SYMBOL_FIELDS): Don't define.
789 * config/obj-multi.h (struct elf_obj_sy): Add local field. If
790 ECOFF_DEBUGGING, add ECOFF fields.
791 (ELF_TARGET_SYMBOL_FIELDS, TARGET_SYMBOL_FIELDS): Don't define.
792 (ECOFF_DEBUG_TARGET_SYMBOL_FIELDS): Don't define.
793 * config/tc-mcore.h: Don't include struc-symbol.h.
794 (TARGET_SYMBOL_FIELDS): Don't define.
795 (struct mcore_tc_sy): Define.
796 (TC_SYMFIELD_TYPE): Define.
797 * Many files: Use symbolS instead of struct symbol. Use new
798 accessor functions rather than referring to symbolS fields
801 * read.c (s_mri_common): Don't add in value of line_label.
803 * config/tc-mips.c (md_apply_fix): Correct parenthesization when
804 checking for SEC_LINK_ONCE.
806 * config/tc-sh.h (sh_fix_adjustable): Declare.
808 * app.c (input_buffer): New static variable.
809 (app_push): Save saved_input in allocated buffer.
810 (app_pop): Restored saved_input.
811 (do_scrub_chars): Change get parameter to take char * and int as
812 arguments. Change GET macro to pass input_buffer to get
813 function. Don't save input into allocated buffer.
814 * as.h (do_scrub_chars): Update declaration.
815 * input-file.c (input_file_get): Change to take char * and int.
816 Read data into passed in buffer. Remove static buffer.
817 * read.c (scrub_from_string): Change to take char * and int. Copy
818 data into passed in buffer.
820 * hash.h: Neaten. Declare hash_traverse.
821 * hash.c: Complete rewrite based on BFD hashing code.
822 * gasp.c (chunksize): New variable.
823 * macro.c (macro_expand_body): Call hash_jam with NULL rather than
828 * config/tc-arm.c (md_apply_fix3): Add pipeline offset into reloc
829 addend unless the target uses an old ABI.
833 -Wchar-subscripts cleanup
834 * listing.c (listing_newline): Use unsigned char variable, so
835 calls to isascii,iscntrl are correct.
836 * atof-generic.c (atof_generic): Cast arg to isdigit, et. al. with
838 * ecoff.c (ecoff_directive_ent,ecoff_stab): Ditto.
839 * config/obj-elf.c (obj_elf_vtable_inherit): Ditto.
840 * config/tc-mips.c (mips_ip,mips16_ip): Ditto.
841 (my_getSmallExpression,get_number,s_mips_ent): Ditto.
845 * config/tc-m68k.c (m68k_ip): Check for disallowed index register
847 (arch_coldfire_p): New #define.
848 (m68k_ip, m68k_init_after_args): Use arch_coldfire_p.
852 * config/tc-m68k.c (install_operand): Add places `n', `o'.
854 * config/tc-m68k.c (m68k_ip): Add formats `E', `G', `H'.
855 (install_operand): Add place `N'.
856 (init_table): Add registers ACC, MACSR, MASK.
858 * config/m68k-parse.h (m68k_register): Add ACC, MACSR, MASK.
860 * config/tc-m68k.c: Change mcf5200 --> mcf.
861 (archs): Add mcf5206e, mcf5307.
862 (m68k_ip): Add format `u'.
863 (install_operand): Add place `m', `M', `h'.
864 (init_table): Add upper/lower registers.
866 * config/m68k-parse.h (m68k_register): Add upper/lower registers.
870 * config/tc-i960.c: Several minor changes to add ELF and
871 BFD_ASSEMBLER support.
872 * config/tc-i960.h: Likewise.
873 * configure.in (i960-*-elf*): New target.
874 * aclocal.m4, configure: Rebuild.
878 * config/tc-i386.c (md_apply_fix3): Only do 1999-05-17 fx_pcrel
879 reloc changes when defined(BFD_ASSEMBLER).
883 * config/tc-i386.c (tc_gen_reloc): Remove F and MAP macros.
885 * write.c (write_print_statistics): Output to file, not stderr.
887 * expr.c (generic_bignum_to_int32,64): Prototype.
889 * read.c (s_lcomm_internal, sizeof_sleb128, sizeof_uleb128,
890 output_sleb128, output_uleb128, output_big_sleb128,
891 output_big_uleb128, output_big_leb128): Prototype.
892 (output_big_sleb128, output_big_uleb128): Make inline.
893 (output_big_leb128): Remove inline
896 * config/tc-i386.c (md_apply_fix3): Convert BFD_RELOC_16 with
897 fx_pcrel set to BFD_RELOC_16_PCREL. Similarly for BFD_RELOC_8.
898 Handle BFD_RELOC_16_PCREL and BFD_RELOC_8_PCREL. Return changed
899 value for correct overflow check in write.c:fixup_segment.
900 * write.c (fixup_segment): Move bitfield overflow checks to after
901 the md_apply_fix call.
902 * config/obj-coff.c (fixup_segment): Likewise.
903 * doc/internals.texi (CPU backend): Mention md_apply_fix modifying
904 valueT *val argument.
908 * config/atof-ieee.c (gen_to_words): Correctly round a
909 denormalized number. Fix off-by-one in range checking for
910 exponent in a denormal.
914 * config/tc-mcore.c (parse_reg): Accept 'sp' as a valid register
919 * configure.in (i386-*-rtemself*, sh-*-rtemself*): New targets.
923 * config/tc-i386.h (InvMem): New flag. Add to AnyMem.
924 (ReverseRegRegmem): Remove.
925 (ImmExt): New flag. Renumber some of the opcode_modifier bits.
926 * config/tc-i386.c (md_assemble): Test for PIII SIMD and AMD
927 3DNow! via ImmExt opcode_modifier. Remove ReverseRegRegmem
931 * config/tc-i386.h (RegXMM): New for P/III.
932 * config/tc-i386.c: Add support for P/III.
936 * config/tc-ppc.c (md_parse_option): Recognize -mppc64bridge.
937 (md_begin): Allow ppc32 insns in ppc64bridge mode.
938 (ppc_insert_operand): Accept SIGNOPT in ppc64 mode.
942 * config/tc-i386.c (i386_immediate): Skip whitespace before
943 complaining about junk after expression.
944 (i386_displacement): Likewise.
948 * symbols.c (symbol_find_base): Use memcpy instead of strcpy.
949 Don't copy before downcaseing.
953 * tc-m68k.c: Include elf/m68k.h.
954 (m68k_elf_final_processing): New routine.
955 * tc-m68k.h (elf_tc_final_processing m68k_elf_final_processing):
960 * config/tc-hppa.c (md_apply_fix): Handle 22 bit fmt insn like a
965 * config/tc-mcore.c (mcore_s_section): Dump literals before
970 * config/tc-mcore.c (md_apply_fix3): Insert reloc addend into insn
975 * config/tc-fr30.h (TC_FIX_TYPE): Delete, cgen fields moved to write.h.
976 (TC_INIT_FIX_DATA): Delete.
977 * config/tc-m32r.h (TC_FIX_TYPE): Delete, cgen fields moved to write.h.
978 (TC_INIT_FIX_DATA): Delete.
979 * write.h (struct fix): New member fx_cgen, ifdef USING_CGEN.
980 * write.c (fix_new_internal): Initialize fx_cgen member.
981 * cgen.c (gas_cgen_record_fixup,gas_cgen_record_fixup_exp): Update.
982 (gas_cgen_md_apply_fix3): Update.
983 * config/tc-m32r.c (md_cgen_lookup_reloc): Update.
984 (md_cgen_record_fixup_exp): Update.
985 (FX_OPINFO_R_TYPE): Update.
987 * frags.c (frag_var,frag_variant): Initialize fr_cgen here.
988 * config/tc-fr30.h (TC_FRAG_INIT): Delete.
989 * config/tc-m32r.h (TC_FRAG_INIT): Delete.
990 * frags.h (struct frag): Make opindex, opinfo ints.
992 * config/tc-fr30.c (FX_OPINFO_R_TYPE): Delete, unused.
996 * aclocal.m4, configure: Updated for new version of libtool.
1000 * config/tc-mcore.c (md_apply_fix3): Renamed function from
1002 (md_apply_fix3): Do not fix up absolute relocations against
1005 * config/tc-mcore.h (MD_APPLY_FIX3): Define.
1009 * config/tc-mcore.c (md_pseudo_table): Add intercepts for section
1010 changes and data-in-text directives.
1011 (mcore_cons): New function: intercept cons() operations.
1012 (mcore_float_cons): New function: intercept float_cons()
1014 (mcore_stringer): New function: intercept stringer() operations.
1018 * obj.h (struct format_ops): Change generate_asm_lineno field to
1020 * config/obj-ecoff.h (OBJ_GENERATE_ASM_LINENO): Don't define.
1022 * config/tc-alpha.c (find_opcode_match): Add default case to
1024 (find_macro_match): Likewise.
1025 (load_expression): Parenthesize && within ||.
1027 * config/tc-alpha.h (TC_RELOC_RTSYM_LOC_FIXUP): Define.
1031 * config/tc-mcore.c (md_pseudo_table): Add overrides for .bss
1032 .text .data .section pseudo ops.
1033 (mcore_s_section): New function. Dump lits before changing secs.
1034 (mcore_s_text): New function. Dump lits before changing secs.
1035 (mcore_s_data): New function. Dump lits before changing secs.
1039 * config/tc-mips.c (mips_32bitmode): New.
1040 (md_begin): Set mips_32bitmode if needed.
1041 (mips_elf_final_processing): Don't set EF_MIPS_ARCH.
1042 Set EF_MIPS_32BITMODE.
1046 * config/obj-coff.c (c_section_symbol): Fix typo in previous
1051 * config/tc-mcore.h (LOCAL_LABELS_FB): Define to 1.
1055 * tc-hppa.c (pa_get_absolute_exression): Try to handle "5 %r3"
1056 expressions correctly.
1061 * config/tc-mips.c (mips_elf_final_processing): Set EF_MIPS_ARCH.
1065 * tc-hppa.c (pa_ip, case '3'): New case for PA2.0 fmpyfadd
1066 and fmpynfadd instructions.
1070 * as.h (environ): Declare it, if needed.
1071 * as.c (dump_statistics): Don't declare environ.
1072 * configure.in (environ): Detect declaration.
1073 * configure, config.in: Rebuild
1075 * config/tc-i386.c (i386_immediate): Accept @GOT relocations.
1076 (i386_displacement): Allocate enough space for replacement buffer.
1077 Clean up replacement buffer initialization.
1081 * subsegs.c (section_symbol): Don't create a new symbol if one
1082 already exists; instead, use the existing one, but set its segment
1083 and frag data if it hasn't already been defined.
1084 * config/obj-coff.c (c_section_symbol): Likewise.
1088 * tc-alpha.c (load_expression): Call as_bad instead of abort.
1092 * config/tc-mcore.c: New File: Support routines for MCore
1094 * config/tc-mcore.h: New File: Definitions for MCore assembler.
1095 * config/obj-coff.c: Add support for mcore-pe target.
1097 * Makefile.am: Add support for MCore targets.
1098 * Makefile.in: Regenerate.
1099 * configure.in: Add support for MCore targets.
1100 * configure: Regenerate.
1102 * doc/all.texi: Set MCORE.
1103 * doc/as.texinfo: Document MCore specific command line options.
1105 * write.h: Prevent multiple inclusion.
1109 * asintl.h (LC_MESSAGES): Never define.
1110 * as.c (main): Don't pass LC_MESSAGES to setlocale if the system
1112 * gasp.c (main): Don't pass LC_MESSAGES to setlocale if the system
1115 * Makefile.am (m68k-parse.c): If configuring in the source
1116 directory, copy m68k-parse.y into the local directory before
1117 running ylwrap, to remove spurious differences when generating
1119 * Makefile.in: Rebuild.
1121 * config/tc-sparc.h (md_do_align): Just allocate the number of
1122 bytes necessary, rather than always allocating 1024.
1126 * listing.c (listing_newline): Add cast to avoid warning.
1127 * read.c (generate_lineno_debug): Add cases to switch. Reindent.
1128 * config/tc-i386.c (i386_scale): Add return value.
1129 (build_displacement_string): Remove unused local temp_disp2.
1130 (i386_intel_memory_operand): Add parentheses to avoid warning.
1131 (i386_intel_operand): Remove unused local end_of_operand_string.
1132 (i386_operand): Remove unused local operand_modifier.
1133 (i386_operand): Add parens to avoid warning.
1137 * configure.in: Add mips*-*-vxworks* target; have it define
1139 * configure, config.in: Rebuild.
1143 * configure.in (emulations): Add support for arm-epoc-pe.
1144 * configure: Regenerate.
1145 * config/te-epoc-pe.h: New file. Define macros specific to
1147 * config/tc-arm.h: Select epoc-pe-arm target format if configured
1148 for arm-epoc-pe target.
1152 * tc-mips.c (md_apply_fix): Adjust value for linkonce sections.
1156 * tc-hppa.c (pa_parse_nonneg_cmpsub_cmpltr): Clean up code to
1157 detect ",n" without a condition.
1158 (pa_parse_neg_cmpsub_cmpltr): Likewise.
1163 * tc-hppa.c (pa_ip, case '~'): The condition for a branch on bit
1164 instruction is encoded with one bit.
1169 * doc/internals.texi (CPU backend): Mention that
1170 line_separator_chars should not include newline. From thi
1175 * config/tc-fr30.c (md_begin): Update call to fr30_cgen_cpu_open.
1176 * config/tc-m32r.c (md_begin): Update call to m32r_cgen_cpu_open.
1180 * tc-alpha.c (md_assemble): Allow '6' in an opcode.
1184 * tc-hppa.c (pa_ip, case 'a'): Do not call pa_parse_..._cmpsub_cmpltr.
1189 * tc-hppa.c (pa_ip, case 'd'): Do not allow ",n".
1193 * app.c (do_scrub_begin): Change '-' back to a symbol char
1194 so we can use multiple opcodes on a line again.
1196 * config/tc-d30v.c: By default, warn if a symbol has
1197 the same name as a register. Plus some minor
1198 updates from the branch.
1202 * config/tc-d30v.c (md_apply_fix3): Handle BFD_RELOC_8,
1203 BFD_RELOC_16 and BFD_RELOC_64.
1207 * expr.c (expr): Add missing else.
1211 * config/tc-arm.c (md_apply_fix3): Improve error message.
1215 * Makefile.am (CPU_TYPES): Add fr30.
1216 (cgen.o): Add $(CGEN_CPU_PREFIX)-desc.h dependency.
1217 (fr30,m32r dependencies): Update.
1218 * Makefile.in: Rebuild.
1220 * cgen.c (gas_cgen_record_fixup): Update use of operand->type.
1221 (gas_cgen_record_fixup_exp): Ditto.
1222 (gas_cgen_finish_insn): Call cgen_operand_lookup_by_num.
1223 (gas_cgen_md_apply_fix3): Ditto. Update call to set_vma_operand.
1224 * config/tc-fr30.c (md_begin): Update call to fr30_cgen_cpu_open.
1225 (md_cgen_lookup_reloc): Update use of operand->type.
1226 * config/tc-m32r.c (md_begin): Update call to fr30_cgen_cpu_open.
1227 (md_convert_frag): Call cgen_operand_lookup_by_num.
1228 (md_cgen_lookup_reloc): Update use of operand->type.
1229 (m32r_cgen_record_fixup_exp): Ditto.
1233 * config/tc-mips.c (md_show_usage): Fix message.
1237 * doc/c-arm.texi (ARM Syntax): Document new command line switches
1238 and LDR reg,=<expr> instruction.
1240 * config/tc-arm.c: Add support for -mcpu=arm810, -mcpu=arm9 and
1245 * doc/c-arm.texi (ARM-Chars): Fix typo in use of '@'.
1249 This patch was created by: Scott Bambrough
1253 Special cased '@' character. The '@' character is used as the
1254 ARM assembler comment character, as a special character
1255 and in ELF .symver pseudo-op's, and as a special character in
1256 .type and .section pseudo-ops.
1257 (symver_pseudo): New static variable.
1258 (symver_state): New static variable.
1259 (struct app_save): Add field 'symver_state'.
1260 (app_push): Save global symver_state int struct app_save.
1261 (app_pop): Restore global symver_state from struct app_save.
1262 (do_scrub_chars): Special case handling of '@' character in
1265 * configure.in: Modified to recognize armv* uname syntax from ARM
1267 * configure: Regenerated.
1269 * config/obj-elf.c (obj_elf_section): Allow '%' as well as '@' as
1270 a prefix to the section's type.
1271 (obj_elf_type): Allow '%' as well as '@' and '#' as prefixes to
1272 the type's typename.
1274 * config/tc-arm.h: Add support for PIC generation:
1275 (pic_code): New boolean.
1276 (obj_relocate_extern): Define.
1277 (TC_RELOC_RTSYM_LOC_FIXUP): Define
1278 (TC_CONS_FIX_NEW): Define.
1279 (tc_fix_adjustable): Define.
1280 (GLOBAL_OFFSET_TABLE_NAME): Define.
1282 * config/tc-arm.c: Add support for PIC generation:
1283 (line_seperator_chars): Allow ';' as a seperator for Linux.
1284 (is_immediate_prefix): New macro.
1285 (arm_parse_reloc): New function.
1286 (s_arm_elf_cons): New function.
1287 (do_branch): Special case for BFD_RELOC_ARM_PLT32.
1288 (md_undefined_symbol): Special case handling for the Global Offset
1290 (md_apply_fix3): Handle PIC relocs.
1291 (tc_gen_reloc): Handle PIC relocs.
1292 (md_parse_option): Add support for '-k' command line switch to
1293 enable PIC generation.
1294 (cons_fix_new_arm): New function.
1295 (s_arm_elf_cons): New function.
1299 * configure.in: Add comments for uses of AC_DEFINE.
1300 * acinclude.m4: Likewise.
1301 * acconfig.h: Remove.
1302 * aclocal.m4: Rebuild.
1303 * configure: Rebuild.
1304 * Makefile.in: Rebuild.
1305 * config.in: Rebuild.
1309 * config/tc-mips.c (mips_ip: case 'o'): Fix assertion failure for
1310 non-constant offset from a base register.
1314 * config/tc-alpha.c (md_show_usage): Put \ before newline in
1319 * config/tc-alpha.c (cpu_types): Enable EV6 PALcode with -m21264.
1320 (emit_insn): Look for pc-relative and no-overflow specifiers on
1321 internal relocation types.
1325 * doc/c-mips.texi (MIPS Opts): Updated list of -mNNNN and
1328 * config/tc-mips.c: Remove all the mips_NNNN variables; just use
1330 (mips_4650, mips_4010, mips_4100): Variables removed.
1331 (hilo_interlocks, gpr_interlocks, append_insn, macro_build, macro,
1332 macro2, mips16_macro, mips_ip): Test mips_cpu, not the mips_NNNN
1334 (md_begin): Don't bother initializing the mips_NNNN variables;
1335 mips_cpu is set, and that's good enough now.
1336 (md_parse_option): Have the -mNNNN options set mips_cpu instead of
1337 the mips_NNNN variable. The -no-mNNNN flags are now no-ops.
1338 (show): New function, to handle wrapping in the CPU lists.
1339 (md_show_usage): Update lists of -mcpu and -mNNNN switches.
1343 * config/tc-i386.c (i386_intel_operand): Ignore `SHORT' rather
1344 than treat as an immediate specifier.
1348 * config/tc-i386.c: Prototype many functions.
1349 (set_intel_syntax): Accept `prefix'/`noprefix' specifiers.
1350 (i386_immediate): Remove unused second argument.
1351 (i386_intel_operand): Fix i386_is_reg typo.
1352 (i386_operand): Use allow_naked_reg.
1353 (output_invalid): Make operand int for K&R.
1357 * Makefile.am (EXTRA_as_new_SOURCES): Uncomment--fixed by automake
1359 * Makefile.in: Rebuild.
1363 * Makefile.am (DISTCLEANFILES): Change cgen-opc.h to cgen-desc.h.
1365 (EXTRA_as_new_SOURCES): Comment out.
1366 (.tcdep): <arch>-opc.h renamed to <arch>-desc.h.
1367 * Makefile.in: Rebuild.
1368 * doc/Makefile.in: Rebuild.
1369 * configure.in: Require autoconf 2.13. Redo using_cgen handling.
1370 Delete call to AM_CYGWIN32. Replace AM_EXEEXT with AC_EXEEXT.
1371 (AC_OUTPUT): <arch>-opc.h renamed to <arch>-desc.h.
1372 * configure: Rebuild.
1373 * aclocal.m4: Rebuild.
1374 * config.in: Rebuild.
1375 * cgen.c: Include cgen-desc.h, not cgen-opc.h.
1376 (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
1377 (gas_cgen_cpu_desc): Renamed from gas_cgen_opcode_desc.
1378 CGEN_INSN_ATTR renamed to CGEN_INSN_ATTR_VALUE.
1379 CGEN_OPERAND_ATTR renamed to CGEN_OPERAND_ATTR_VALUE.
1380 (gas_cgen_record_fixup): Remove unnecessary != 0 test.
1381 (gas_cgen_record_fixup_exp): Ditto.
1382 (gas_cgen_finish_insn): Ditto. Refer to operand table via cpu
1383 descriptor, not global variable.
1384 (gas_cgen_md_apply_fix3): Refer to operand_table via cpu
1385 descriptor, not global variable. Refer to insert_operand handler
1386 via cpu descriptor, not global function.
1387 * cgen.h (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
1388 * config/tc-fr30.c: Include opcodes/fr30-desc.h.
1389 (*): gas_cgen_opcode_desc renamed to gas_cgen_cpu_desc.
1390 CGEN_INSN_ATTR renamed to CGEN_INSN_ATTR_VALUE.
1391 Update call to CGEN_OPERAND_TYPE,CGEN_INSN_OPERANDS.
1392 * config/tc-m32r.c: Ditto.
1393 (assemble_two_insns): Update calls to cgen_lookup_get_insn_operands.
1394 (md_assemble): Ditto.
1395 (md_convert_frag): Update call to CGEN_OPERAND_ENTRY.
1399 * config/tc-arm.c (md_apply_fix3): Fix handling of label1 - label2
1400 relocations for ELF targets.
1404 * configure.in: Add support for StrongARM target.
1405 * configure: Regenerate.
1409 * config/tc-arm.h: Tidy OBJ_ELF and OBJ_COFF definitions.
1411 * config/tc-arm.c (md_apply_fix3): Fix BFD_RELOC_ARM_PCREL_BRANCH
1416 * config/tc-alpha.c (md_show_usage): Document pca56 and ev6 options.
1420 * config/tc-i386.h (LONG_DOUBLE_MNEM_SUFFIX): Define.
1421 (INTEL_DWORD_MNEM_SUFFIX): Define.
1424 (DWORD_PTR): Define.
1425 (XWORD_PTR): Define.
1427 (OFFSET_FLAT): Define.
1429 (NONE_FOUND): Define.
1432 * config/tc-i386.c (set_intel_syntax): New routine.
1433 (intel_syntax): Declare.
1434 (allow_naked_reg): Declare.
1435 (md_pseudo_table): Support .intel_syntax and .att_syntax.
1436 (intel_float_operand): New routine.
1437 (md_assemble): Handle INTEL_DWORD_MNEM_SUFFIX.
1438 Handle brackets as well as parens. Call i386_intel_operand for
1439 intel syntax. Reverse operands if appropriate. Handle new
1440 suffixes. Handle movzx and movsx.
1441 (i386_is_reg): New routine.
1442 (i386_immediate): New routine.
1443 (i386_scale): New routine.
1444 (i386_displacement): New routine.
1445 (i386_operand_modifier): New routine.
1446 (build_displacement_string): New routine.
1447 (i386_parse_seg): New routine.
1448 (i386_intel_memory_operand): New routine.
1449 (i386_intel_operand): New routine.
1450 (i386_operand): Call i386_displacement, i386_immediate,
1451 i386_scale, etc. instead of handling inline.
1452 (parse_register): Handle registers without prefix.
1456 * configure: Regenerate.
1457 * configure.in (arm-*-oabi): New.
1458 (thumb-*-oabi): New.
1459 * config/tc-arm.c (target_oabi): Declare.
1460 (md_apply_fix3): Support REL relocs.
1461 (md_parse_option): Handle -oabi.
1462 (elf32_arm_target_format): New routine.
1463 (md_longopts): Add OPTION_OABI.
1464 * config/tc-arm.h: Redefine TARGET_FORMAT.
1469 * write.c (write_relocs): Handle out of range error.
1471 * config/tc-fr30.c (fr30_fix_adjustable): New function.
1472 (fr30_force_relocation): Default to 0.
1474 * config/tc-fr30.h (obj_fix_adjustable): Define.
1475 (TC_FORCE_RELOCATION): Define.
1477 * cgen.c (gas_cgen_md_apply_fix3): Do not apply fixes to VTABLE
1482 * config/tc-d30v.c (write_2_short): Do not generate a sequential
1483 merge of two instructions if the left instruciton kills the right.
1487 * Makefile.in: Regenerate.
1488 * configure.in: Redo test for using cgen.
1489 * configure: Regenerate.
1493 * config/obj-coff.h (obj_adjust_symtab): Prevent accidental
1494 redefinition of this macro.
1498 * config/tc-mips.c (mips_frob_file): Disable "Unmatched %hi reloc"
1503 * config/tc-mips.c (append_insn): For mips16, insert a nop between
1504 a read of HI or LO and an immediatly following branch.
1508 * config/tc-mips.c (md_begin): Another correction to the setting of
1513 * config/tc-mips.c (md_begin): Correct type-o in setting of mips_eabi64.
1517 * config/tc-m32r.c (md_assemble): Emit a NOP after a relaxable 16
1518 bit insn when optimizing, so that parallelised instructions will
1519 start on a 32 bit boundary.
1523 * config/tc-mips.c (mips_eabi64): New.
1524 (md_begin): Set mips_eabi64.
1525 (mips_elf_final_processing): Use it.
1529 * config/tc-mips.c (mips_elf_final_processing):
1530 Correct setting of ABI in e_flags.
1534 * config/tc-fr30.c (md_assemble): Warn about invalid instructions in delay slots.
1538 * config/tc-mips.c (md_begin,md_parse_option): Handle vr4111.
1542 * cgen.c (gas_cgen_md_apply_fix3): Mark as an error, rather than a
1543 warning, values that don't fit in the field.
1547 * config/tc-mips.c (mips_abi_string): New.
1548 (md_parse_option,md_longopts): Add mabi.
1549 (mips_elf_final_processing): Set e_flags based on mabi flag.
1553 * config/tc-mips.c (md_parse_option): Handle vr4111.
1557 * config/tc-h8300.c (build_bytes): Change message given if the
1558 instruction requires H8/300H mode and we're not in Hmode, to
1559 suggest that it may be the operand modes that are the problem, not
1560 necessarily the opcode.
1564 * config/tc-fr30.c: Add line separator character.
1568 * configure.in (hppa-*-mpeix*): New target.
1569 * config/obj-som.h (obj_som_compiler): Declare.
1570 * config/obj-som.c (compiler_seen): New static variable.
1571 (obj_som_compiler): New function.
1572 * config/tc-hppa.c: Update tc_data uses for change to bfd/som.h.
1573 (md_pseudo_table): Add "compiler" if OBJ_SOM.
1574 (pa_type_args): Set hppa_priv_level.
1575 (pa_compiler): New static function if OBJ_SOM.
1576 * configure: Rebuild.
1580 * read.c (output_leb128): Don't mark as inline.
1584 * config/tc-ppc.c (ppc_vbyte): Prototype and new function for
1585 AIX .vbyte unaligned data support.
1586 (md_pseudo_table): Add 'vbyte' to list of valid pseudos.
1587 (ppc_elf_validate_fix): Add eh_frame to list of ELF relocatable
1592 * config/tc-d30v.c (md_assemble, do_assemble): Improve erroneous
1597 * config/tc-arm.c (elf32_arm_force_relocation): Check for
1598 BFD_RELOC_ARM_PCREL_BRANCH.
1602 * configure.in: Define TARGET_BYTES_{BIG,LITTLE}_ENDIAN after
1603 checking the target type.
1604 (mips-dec-bsd*): Set endian to little.
1605 * configure: Rebuild.
1607 COFF weak symbol support, based on patches from Mark Elbrecht
1609 * config/obj-coff.h (S_IS_WEAK): Define if not BFD_ASSEMBLER.
1610 * config/obj-coff.c (obj_coff_weak): New static function.
1611 (obj_coff_endef) [both versions]: Handle weak symbols.
1612 (coff_frob_symbol): Likewise.
1613 (yank_symbols): Likewise.
1614 (obj_pseudo_table): Add "weak".
1616 * configure.in (m68k-*-gnu*): New target. From Aymeric Vincent
1618 * aclocal.m4: Rebuild with current tools.
1619 * configure: Rebuild.
1621 * config/tc-alpha.c (emit_ldgp): Give an error message rather than
1622 an assertion failure for a case we can't handle when OBJ_ECOFF.
1624 * expr.c (operator): And with 0xff to avoid problems with signed
1629 * config/tc-fr30.c (md_cgen_lookup_reloc): Generate
1630 BFD_RELOC_FR30_48 instead of BFD_RELOC_FR30_32.
1634 * config/tc-fr30.c (md_cgen_lookup_reloc): Enable relocs for
1639 * config/tc-fr30.c (md_pcrel_from_section): Restore previous calculation
1644 * config/tc-fr30.c (md_pcrel_from_section): Fix calculation of
1649 * config/tc-d10v.c (md_assemble): Make static 'etype' have file
1651 (d10v_cleanup): Only generate previous insn if a multiline insn is
1656 * config/tc-fr30.c (md_cgen_lookup_reloc): Add support for
1661 * config/tc-arm.c (md_parse_option): Add support for -marm7xxx and
1662 -marm6xxx command line switches.
1666 * Makefile.am (DEP): Use $(srcdir)/../mkdep.
1667 (itbl-ops.o): Delete duplicate dependencies.
1668 Rebuild dependencies.
1669 Add fr30 dependencies.
1670 * Makefile.in: Rebuild.
1674 * config/tc-fr30.c (md_cgen_lookup_reloc): Updated to match latest
1676 * listing.c: Ignore line terminator characters found inside
1681 * po/gas.pot: Regenerated.
1685 * config/tc-fr30.c (fr30_is_colon_insn): New name for
1686 fr30_is_label_start(). Also checks for delay slot insns.
1688 * config/tc-fr30.c (fr30_is_label_start): New function: Handle
1689 FR30 instructions which contain a colon in the mnemonic.
1691 * config/tc-fr30.h (TC_START_LABEL): Define this macro.
1695 * config/tc-fr30.c: Removed currently superflous code.
1699 * config/tc-fr30.h: New file.
1700 * config/tc-fr30.c: Tweaking so that it will compile.
1704 * config/tc-d10v.h (obj_fix_adjustable): Define.
1705 (TC_FORCE_RELOCATION): Define.
1706 (d10v_force_relocation): Declare.
1707 * config/tc-d10v.c (tc_gen_reloc): Handle Vtable relocs.
1708 (md_apply_fix3): Handle Vtable relocs.
1709 (d10v_fix_adjustable): New.
1710 (d10v_force_relocation): New.
1714 * config/tc-d30v.c: Change default behaviour to ignore potential
1715 conflicts between register name and symbol names.
1719 * configure.in: Add fr30-*-*.
1720 * config/tc-fr30.c: New file.
1721 * Makefile.in: Regenerated.
1722 * config.in: Regenerated.
1723 * configure: Regenerated.
1724 * doc/Makefile.in: Regenerated.
1725 * po/gas.pot: Regenerated.
1729 * config/tc-m32r.c (assemble_two_insns): Ensure both insns
1734 * app.c (do_scrub_begin): Set characters above 127 to be symbol
1736 (do_scrub_chars): Add some casts to unsigned char to avoid
1737 unwanted sign extension.
1738 * read.c (lex_type): Set characters about 127 to be symbol
1740 * config/tc-i386.c (md_begin): Set identifier_chars and
1741 operand_chars for values above 127.
1745 * configure.in: detect cygwin* instead of cygwin32*
1746 * configure: regenerate
1750 * listing.c: Add support for producing a listing from piped
1755 * config/tc-mips.c (hilo_interlocks): Remove mips_3900.
1756 (append_insn): Account for the tx39's multiply behavior.
1760 * config/tc-m32r.c (assemble_two_insns): Rename assemble_two_insns
1761 from assemble_parallel_insns. Add support for '->' to indicate
1762 explicitly serializing the instructions.
1763 (md_assemble): Ditto.
1767 * config/tc-sh.c (sh_fix_adjustable): Adjust EXTERN and
1772 * cgen.c (gas_cgen_md_apply_fix3): Revert last change.
1776 * config/tc-mips.c : support frame and regmask/fregmask when
1777 MIPS_STABS_ELF is specified.
1781 * config/tc-sh.c (sh_fix_adjustable): Only include if OBJ_ELF.
1782 (md_apply_fix): Don't return 1 for VTABLE relocs.
1783 * config/tc-sh.h (obj_fix_adjustable): Define only if OBJ_ELF.
1787 * doc/c-i386.texi: Replace occurences of "opcode" with
1788 "instruction mnemonic", "instruction", or "mnemonic" when
1789 referring to the name of an instruction. Use "opcode" when
1790 referring to the sequence of machine bytes.
1792 * config/tc-i386.c (opcode_chars): Rename to mnemonic_chars.
1793 (is_opcode_char): Rename to is_mnemonic_char.
1794 (md_assemble and i386_operand): Correct error messages from
1795 "opcode" to "instruction mnemonic"
1796 Rename throughout opcode[] -> mnemonic[], opp -> mnem_p,
1797 MAX_OPCODE_SIZE -> MAX_MNEM_SIZE,
1798 DWORD_OPCODE_SUFFIX -> DWORD_MNEM_SUFFIX,
1799 WORD_OPCODE_SUFFIX -> WORD_MNEM_SUFFIX,
1800 BYTE_OPCODE_SUFFIX -> BYTE_MNEM_SUFFIX,
1801 SHORT_OPCODE_SUFFIX -> SHORT_MNEM_SUFFIX
1802 LONG_OPCODE_SUFFIX -> LONG_MNEM_SUFFIX
1804 * config/tc-i386.h (*_MNEM_SUFFIX): Rename from *_OPCODE_SUFFIX.
1806 * config/tc-i386.c (i386_operand): Check for garbage after
1811 * config/tc-i386.c (md_apply_fix3): Change handling of PCREL reloc
1812 for BFD_ASSEMBLER to only change value when COFF if TE_PE.
1816 * config/tc-sh.h (obj_fix_adjustable): Define.
1817 * config/tc-sh.c (sh_force_relocation): Handle VT relocs.
1818 (md_apply_fix): Likewise.
1819 (tc_gen_reloc): Likewise.
1820 (sh_fix_adjustable): New.
1824 * cgen.c (gas_cgen_finish_insn): Update handling of CGEN_INT_INSN_P.
1825 * cgen.h (gas_cgen_finish_insn): Update prototype.
1826 * config/tc-m32r.c (m32r_insn): CGEN_INT_INSN -> CGEN_INT_INSN_P.
1827 cgen_insn_t -> CGEN_INSN_INT.
1828 (make_parallel): Update handling of CGEN_INT_INSN_P.
1829 (assemble_parallel_insn): Ditto.
1830 (target_make_parallel): New function.
1831 (md_assemble): Use it.
1835 * config/tc-m32r.c (m32r_force_relocation): Fix typo.
1839 * config/tc-sh.c (md_assemble): Make sure the entire opcode is
1840 converted into lower case.
1844 * cgen.c (gas_cgen_md_apply_fix3): Handle VTABLE relocs.
1845 (gas_cgen_tc_gen_reloc): Likewise.
1846 * config/tc-m32r.h (obj_fix_adjustable): Define.
1847 * config/tc-m32r.c (m32r_fix_adjustable): New.
1848 (m32r_force_relocation): Handle VTABLE relocs.
1852 * doc/c-arm.texi (ARM Directives): Document .ltorn directive.
1856 * config/tc-m32r.c (assemble_parallel_insn): Convert second opcode
1857 to lower case before parsing.
1859 * config/tc-d30v.c (parallel_ok): Ignore conflicts when explicitly
1860 parallel insns modift buts in the PSW as a side effect.
1864 * config/tc-d30v.c (find_format): Test for missing flag and
1867 (md_apply_fix3): Fix error messages to avoid
1868 assumption about presence of a symbol.
1870 (parallel_ok): Disallow parallel instructions that both modify the
1873 (find_format): Generate a warning if an odd numbered register is
1874 used as the first register in a mutli-register instruction.
1878 * config/tc-d30v.c (md_apply_fix3): Do not assume that bad
1879 relocations are always associated with a symbol.
1883 * tc-sparc.h (TC_FORCE_RELOCATION): Define.
1884 (elf32_sparc_force_relocation): Declare.
1885 * tc-sparc.c (md_apply_fix3): Handle vtable relocs.
1886 (tc_gen_reloc): Handle vtable relocs.
1887 (elf32_sparc_force_relocation): New.
1891 * symbols.c (S_IS_FUNCTION): New.
1892 * config/tc-v850.h (obj_fix_adjustable): Define.
1893 (TC_FORCE_RELOCATION): Define.
1894 (v850_force_relocation): Declare.
1895 * config/tc-v850.c (tc_gen_reloc): Use offset instead
1896 of fx_addnumber for VTABLE reloc addends.
1897 (md_apply_fix3): Handle VTABLE relocs.
1898 (v850_fix_adjustable): New.
1899 (v850_force_relocation): New.
1903 * tc-hppa.c (fp_operand_format): Add some additional formats.
1904 (pa_ip): Do not automatically promote into pa2.0 mode.
1905 (pa_level): Handle ".level 2.0".
1909 * config/tc-i386.c (md_assemble): Handle AMD_3DNOW_OPCODE.
1910 * config/tc-i386.h (template.extension_opcode): Change to
1911 unsigned int to allow full range of 8-bit opcode suffixes.
1912 (None): Redefine as 0xffff.
1915 * doc/c-i386.texi (i386-SIMD): New section.
1919 * read.c (discard_rest_of_line): New function.
1920 * read.h: Declare it.
1921 * config/tc-alpha.c (s_alpha_mask, s_alpha_frame): Use it.
1925 * config/tc-d10v.c (find_symbol_matching_register): New function.
1926 (find_opcode): Cope with the case where a register name matches
1931 * config/tc-v850.c (md_pcrel_from): Rename to
1932 v850_pcrel_from_section.
1933 (v850_pcrel_from_section): Do not resolves symbols in other
1936 * config/tc-v850.h (MD_PCREL_FROM_SECTION): Define.
1940 * config/tc-d10v.c (find_opcode): Generate an error if a register
1941 is supplied for an operand that should not be a register.
1945 * config/tc-d30v.c (write_2_short): But do allow delayed branch
1946 instructions to have another instruction in the right bin.
1950 * config/tc-d30v.c (write_2_short): Do not allow instructions in
1951 the right container if the left container holds a branch
1956 * config/tc-d30v.c (reg_name_search): Only warn if a name matches
1957 both a register name and symbol name.
1958 (find_format): Allow correct parsing of MVTSYS and MVFSYS insns.
1962 * config/tc-d30v.c (write_2_short): Implement EITHER_BUT_PREFER_MU
1963 execution unit class.
1965 (reg_name_search): If a name matches a register and a symbol,
1966 prefer the register.
1967 (find_format): Disallow flag registers when a general purpose
1968 register is required.
1969 If a number is required, but a register has been given, check to
1970 see if a symbol with the same name as the register exists, and if
1971 so, use that symbol.
1975 * config/obj-elf.h (ECOFF_DEBUGGING): Add missing parens.
1979 * config/tc-d30v.c (find_format): Do not accept flag registers as
1980 general purpose registers.
1981 (find_format): If an immediate value is expected at a given place
1982 in a format, but a register name has been provided instead, check
1983 to see if that register name matches the name of a predefined
1984 symbol and if it does, then use the symbol instead.
1985 (reg_name_search): If a register name matches a symbol name,
1986 prefer the register name to the symbol name.
1990 * config/tc-m32r.c (m32r_do_align): After inserting NOPs, reset
1991 the previous insn to empty.
1995 * config/tc-ppc.c (md_apply_fix3): Do not break string into two
1996 pieces, forcing the use of an ANSI compiler.
2000 * config/tc-m68k.h (TC_FORCE_RELOCATION): New macro. Force vtable
2002 * config/tc-m68k.c (md_apply_fix_2): Do nothing for vtable relocs.
2006 * config/obj-elf.c (obj_elf_vtable_inherit): Handle arm
2008 (obj_elf_vtable_entry): Likewise.
2009 * config/tc-arm.h: Define TC_FORCE_RELOCATION for OBJ_ELF.
2010 * config/tc-arm.c (md_apply_fix3): Handle VTABLE relocations.
2011 (tc_gen_reloc): Likewise.
2012 (arm_fix_adjustable): Likewise.
2013 (elf32_arm_force_relocation): New.
2014 (armelf_frob_symbol): Remove coff-style symbol support.
2018 * config/tc-i386.c (i386_operand): Fix typo in last patch.
2022 * config/tc-arm.c (arm_adjust_symtab): Move #ifdef
2023 OBJ_COFF so that routine is defined for a.out format.
2027 * config/tc-i386.c (i386_operand): Detect non-segment registers
2028 used as segment prefixes.
2032 * ehopt.c (check_eh_frame): Check the size of the FDE, and don't
2033 optimize across FDE boundaries.
2035 * config/obj-coff.c (obj_coff_section): Preserve any link once
2036 flags when setting the section flags.
2040 * config/tc-arm.h (obj_adjust_symtab): Fixed typo.
2041 * config/tc-arm.c (armelf_adjust_symtab): Reformatted.
2045 * config/tc-sparc.c (in_signed_range): Sign extend 32-bit words
2050 * frags.c (frag_grow): Include the size of the frag struct in the
2053 * subsegs.c (subseg_set_rest): Adjust the seginfo frchain start
2054 if the new subseg comes before the old.
2058 * config/tc-sparc.c (sparc_ip): Allow all digits in an instruction
2059 to handle edge8 and edge16.
2063 * config/obj-elf.c (obj_elf_vtable_inherit): Print error message
2064 before we clobber the symbol involved.
2068 * config/tc-arm.c: Remove OBJ_ELF definitions for
2069 S_GET_STORAGE_CLASS and S_SET_STORAGE_CLASS. Only
2070 use arm_adjust_symtab for OBJ_COFF.
2071 (armelf_adjust_symtab): New Routine.
2072 * config/tc-arm.h: Define obj_adjust_symtab to
2073 armelf_adjust_symtab for OBJ_ELF.
2077 * configure.in: Make all i386-elf targets use bfd_gas.
2078 * config/tc-i386.c (tc_i386_force_relocation): New.
2079 (tc_i386_fix_adjustable): Don't fix vtable relocs.
2080 (md_apply_fix3): Likewise.
2081 (tc_gen_reloc): Handle them.
2082 * config/tc-i386.h (TC_FORCE_RELOCATION): Always define, calling
2083 tc_i386_force_relocation.
2087 * config/tc-arm.c (md_show_usage): Improve formatting of --help output.
2091 * config/tc-d30v.c (md_assemble): Copy previous opcode over
2092 current opcode after writing the first insturction of a reverse
2097 * read.h (generate_lineno_debug): Add prototype.
2098 * read.c (generate_lineno_debug): Make non-static.
2102 * config/tc-i386.c (md_assemble): Only warn for address/data size
2107 * config/tc-arm.c (arm_fix_adjustable): Do not adjust relocations
2108 against Thumb function names, as the linker needs this information.
2112 * expr.c (operand): Check also that there is no advance in operand
2113 after atof_generic in order to decide "is it label 0f or floating
2118 * config/tc-m32r.c: Replace double dash prefix to M32R specific
2119 command line options with a single dash.
2120 * doc/c-m32r.texi: Replace double dash prefix with a single dash.
2124 * tc-arm.h: Define obj_fix_adjustable for OBJ_ELF.
2125 * tc-arm.c (arm_fix_adjustable): New routine.
2129 * read.c (s_align, s_comm, s_mri_common, s_fail, s_globl, s_space,
2130 s_float_space, s_struct, cons_worker): Move ignore_rest_of_line or
2131 demand_empty_rest_of_line before mri_comment_end.
2132 (equals): Check garbage after expression before
2133 mri_comment_end in MRI mode.
2137 * config/tc-mips.c (macro): Correct M_SGE_I/M_SGEUI_I case for a
2138 small immediate constant to use the constant itself rather than
2143 * config/tc-hppa.c (pa_enter): Call as_bad rather than abort.
2144 (pa_leave): Likewise.
2148 * config/tc-i386.c (md_assemble): Emit a warning for stand-alone
2150 (i386_operand): Fix an error message.
2154 * doc/c-arm.texi (ARM Directives): Document .req directive.
2156 * config/tc-arm.c (reg_required_here): Display erroneous string if
2157 the register name could not be decoded.
2158 Do not set inst.instruction if the sift is -1.
2162 * config/tc-alpha.c (tc_gen_reloc): Bias WEAK symbols just as
2167 * config/tc-d30v.c (d30v_align): Always perform alignment request,
2168 even if it is belived to be unnecessary.
2172 config/tc-i386.c (i386_operand): Size immediate constants by
2173 suffix (erroneously removed as part of July 7 change).
2177 * config/obj-elf.h: Check for redefinition of obj_frob_symbol.
2178 * config/tc-arm.c: Define S_GET_STORAGE_CLASS and S_SET_STORAGE_CLASS.
2179 (armelf_frob_symbol): New Routine.
2180 * config/tc-arm.h: Define obj_frob_symbol if OBJ_ELF.
2184 * config/tc-alpha.c (alpha_fix_adjustable): Don't adjust weak syms.
2188 * config/tc-arm.c (md_begin): Set BFD private flags depending upon
2189 command line switches passed to assembler.
2193 * cgen.h (GAS_CGEN_MAX_FIXUPS): GAS_ prepended, all uses updated.
2194 (gas_cgen_opcode_desc): Declare.
2195 (gas_cgen_parse_operand): Declare.
2196 (*): Prepend gas_ to gas specific fns to denote them as such.
2198 * cgen.c (gas_cgen_opcode_desc): New global
2199 (gas_cgen_init_parse): Renamed from cgen_asm_init_parse.
2200 (queue_fixup): Renamed from cgen_queue_fixup.
2201 (*): Prepend gas_ to gas specific fns to denote them as such.
2203 (gas_cgen_md_apply_fix3): Update call to insert_operand.
2204 (gas_cgen_finish_insn): Renamed from cgen_asm_finish_insn.
2205 * config/tc-m32r.c (md_begin): Remove use of CGEN_SYM.
2206 Open opcode table and initialize it.
2207 (make_parallel): Use gas_cgen_opcode_desc.
2208 (assemble_parallel_insn): Ditto. Remove use of CGEN_SYM.
2209 (md_assemble): Ditto.
2213 * as.h (debug_info_type): Add entries for unspecified and dwarf*.
2214 * ecoff.c (ecoff_generate_asm_lineno): Take no arguments; call
2215 as_where ourselves. Provide a stub for !ECOFF_DEBUGGING.
2216 * ecoff.h: Move ECOFF_DEBUGGING protection inside GAS_ECOFF_H.
2217 Move ecoff_generate_asm_lineno outside ECOFF_DEBUGGING protection.
2218 * read.c (generate_lineno_debug): Tidy ECOFF bits. Use
2219 DEBUG_UNSPECIFIED rather than DEBUG_NONE for initial test.
2220 * config/obj-elf.h (ECOFF_DEBUGGING) [TC_ALPHA]: Define to a variable.
2221 (SEPARATE_STAB_SECTIONS): Conditionalize on value of ECOFF_DEBUGGING.
2222 (INIT_STAB_SECTION): Likewise.
2223 (OBJ_PROCESS_STAB): Likewise.
2225 * config/tc-alpha.c (md_longopts): New options -mdebug/-no-mdebug.
2226 (md_parse_option): Watch for them.
2227 (alpha_cur_ent_sym, alpha_flag_mdebug): New variables.
2228 (md_begin): Kill neverdef code.
2229 (s_alpha_ent, s_alpha_end, s_alpha_mask, s_alpha_frame): New.
2230 (s_alpha_prologue): Watch alpha_cur_ent_sym.
2231 (s_alpha_coff_wrapper): New.
2232 (md_pseudo_table): Trap all ECOFF pseudos.
2236 Start of changes to remove mdebug section from mips*-elf
2237 Based on MIPS_STAB_ELF definition
2238 * acconfig.h: undef if not configured
2239 * config.in: undef if not configured
2240 * config/mips-elf.h: only set ECOFF debugging if not stabs-in-elf
2241 * config/tc-mips.c (s_ent): set BSF_FUNCTION
2242 * stabs.c (s_stab_generic): flush frag
2246 * configure.in: (arm-*-elf): Handle.
2247 (thumb-*-elf): Handle.
2248 * configure: Regenerate.
2249 * read.c (stringer): Fix typo in comment.
2250 * write.c (fixup_segment): Don't add symbol value to addend if
2252 * config/tc-arm.c (md_section_align): Don't align dwarf debug
2254 (tc_gen_reloc): Always set the reloc addend to fixp->fx_offset
2259 * config/tc-d30v.c ({cur,prev}_left_kills_right_p): New variables.
2260 (write_2_short): Emit warning if new flag is set.
2261 (do_assemble): Set flags if left instruction is one of special
2262 "right-instruction-killer" type.
2266 * config/tc-sparc.c (md_number_to_chars, cons_fix_new_sparc):
2267 Always output words in debug_info section as big endian.
2268 (sparc_target_format): Choose correct bfd target.
2269 (md_apply_fix3): Rename BFD_RELOC_SPARC_32LE to BFD_RELOC_SPARC_REV32.
2273 * config/tc-mn10300.c (md_assemble): Fix "errmsg" initialization
2274 to work with internationalization code. Issue an error when two
2275 operands match that are not allowed to match.
2279 * configure.in (install_tooldir): Allow target to specify whether
2280 it wants to be installed in $(tooldir)/bin.
2281 * configure: Regenerate.
2282 * Makefile.am (install-exec-local): Set install-exec-tooldir
2283 dependency via configure.
2284 * Makefile.in: Regenerate.
2288 * Makefile.am (install-exec-local): Split into two ...
2289 (install-exec-bindir,install-exec-tooldir): New rules.
2290 * Makefile.in: Regenerate.
2294 * Makefile.am (install-exec-local): Don't remove the file before
2295 checking whether $(bindir) == $(tooldir)/bin. From Maciej
2297 * Makefile.in: Rebuild.
2301 * cgen.c: Include libiberty.h.
2302 (cgen_md_apply_fix3): Update call to md_cgen_lookup_reloc.
2303 (cgen_tc_gen_reloc): Use xmalloc, not bfd_alloc.
2304 * cgen.h (cgen_md_apply_fix3,cgen_tc_gen_reloc): Declare.
2305 (md_cgen_lookup_reloc)): Declare.
2306 (md_cgen_record_fixup_exp): Declare.
2307 * config/tc-m32r.h (md_pcrel_from_section): Declare.
2308 (m32r_relax_frag): Declare.
2309 (cgen_md_apply_fix3): Decls moved to cgen.h.
2310 (cgen_record_fixup_exp,cgen_tc_gen_reloc): Ditto.
2311 (m32r_cgen_record_fixup_exp): Delete decl.
2312 * config/tc-m32r.c (m32r_cpu_desc): #if 0 out.
2313 (assemble_nop): Delete.
2314 (expand_debug_syms): Delete unused `exp'.
2315 (md_cgen_lookup_reloc): Renamed from CGEN_SYM (lookup_reloc).
2316 Add default case for -Wall.
2317 (m32r_cgen_record_fixup_exp): Add default case for -Wall.
2318 (md_atof): Delete unused wordP.
2322 * config/tc-mn10300.c (md_assemble): Make sure "errmsg" has a non-NULL
2327 * doc/as.texinfo: Add documentation for .end, .exitm, .fail,
2328 .ifc, .ifeqs, .ifge, .ifgt, .ifle, .iflt, .ifnc, .ifne, .ifnes,
2329 .print, .purgem, and .struct. Remove documentation for
2334 * cgen.c (cgen_md_apply_fix3): set_operand renamed to set_vma_operand.
2335 Update call to insert_operand.
2339 * config/tc-m32r.c (ms_show_usage): Formatting changes.
2343 * config/tc-i386.c (md_assemble): Don't get confused by trailing
2344 whitespace after a prefix operator.
2348 * configure.in (i386-*-beos{pe,elf,}*): Recognize.
2352 * config/tc-sparc.c (log2): New static function.
2353 (s_reserve): Use log2 to convert alignment before calling
2355 (s_common): Use log2 to convert alignment before calling
2356 record_alignment and frag_align.
2357 (sparc_cons_align): Use log2.
2361 * config/tc-sparc.c (s_reserve): Set symbol size if OBJ_ELF.
2362 (s_common): Likewise.
2364 * config/tc-sparc.c (sparc_handle_align): Reindent a bit. Correct
2365 initialization of waddr.
2366 (sparc_elf_final_processing): Add default case to switch.
2370 * doc/c-i386.texi: Fix a typo. Use the term 80-bit real rather
2371 than temporary real.
2375 * write.c (subsegs_finish): Don't align the segments if there were
2378 * config/obj-coff.c (c_symbol_merge): Correct number of bytes when
2379 copying aux information.
2381 * expr.c (make_expr_symbol): Catch attempts to turn an O_big
2382 expression into a symbol.
2386 * config/tc-i386.c (mode_from_disp_size): Change arg and return
2387 type to unsigned int.
2388 (md_assemble): Change type used to store offsets from unsigned
2390 (i386_operand): Switch error check to only call RESTORE_END_STRING
2391 once after parse_register.
2395 * config/tc-v850.c (md_show_usage): Changed format to match that
2398 * as.c (show_usage): Changed format to match that of gcc, ld, etc.
2402 * config/tc-m68k.c (tc_m68k_fix_adjustable): Don't adjust vtable
2404 (md_apply_fix_2): Force the symbol of the vtable reloc to be
2409 * doc/Makefile.am (MAINTAINERCLEANFILES): Define.
2410 * doc/Makefile.in: Rebuild.
2414 * config/tc-mips.c (mips_ip, case 'i' and 'j'): Mask off high bits
2415 for %lo expressions.
2416 (mips_ip, case 'u'): Move range check after code to mask
2417 off bits in %hi/%lo expressions. Mask off high bits for
2422 * doc/Makefile.am (gasver.texi): New target.
2423 (as.info, as.dvi): Depends upon gasver.texi.
2424 * doc/as.texinfo: Include gasver.texi. Mention version number on
2425 title page and in top node.
2426 * doc/Makefile.in: Rebuild.
2430 * listing.c (listing_listing): For EDICT_LIST, skip all lines up to
2431 but not including the line containing the edict.
2432 * listing.h (LISTING_EOF): New.
2433 * input-scrub.c (input_scrub_next_buffer): Call it.
2437 * config/tc-i386.c (i386_operand): Don't set the size of an
2438 immediate address based solely on the suffix and the mode.
2440 * config/tc-i386.c (md_assemble): Add assertion to make sure
2441 overlap2 does not set Imm.
2443 * config/tc-i386.c (space_chars): Remove. The scrubber converts
2444 sequences of whitespace to a single space.
2445 (is_space_chars): Just compare with space.
2446 (md_begin): Don't initialize space_chars.
2447 (md_assemble): Just skip a single whitespace character.
2448 (i386_operand): Rewrite base-index parsing to use new
2449 parse_register, and to skip white space. Skip white space in a
2450 number of other places too. Don't give error message if
2451 parse_register fails.
2452 (parse_register): Change reg_string parameter to be non-const.
2453 Add end_op parameter. Skip white space after the `%', and return
2454 end of register string. Give error message here rather than
2460 * expr.c (op_encoding): Make const.
2461 (expr_set_precedence): New function.
2462 (expr_begin): Don't set operator rankings, just call
2463 expr_set_precedence.
2464 * expr.h (expr_set_precedence): Declare.
2465 * read.c (s_mri): Call expr_set_precedence.
2469 * doc/as.texinfo (Statements): Remove paragraph discussing
2470 continuing lines with a backslash. This hasn't worked for years,
2475 * obj-vms.c: Add C++ support with ctors/dtors sections. Add weak
2477 (Ctors_Symbols, Dtors_Symbols): New symbol chains.
2478 (ps_CTORS, ps_DTORS): New section types.
2479 (vms_fixup_xtors_section): New function
2480 (Ctors_Psect, Dtors_Psect): Define.
2481 (IS_GXX_XTOR): Define
2482 (global_symbol_directory): Change check of gxx_bug_fixed to 0.
2483 Filter static constructors/destructors and add to
2484 Ctors_Symbols/Dtors_Symbols chain.
2485 (vms_write_object_file): Write Ctors_Symbols/Dtors_Symbols to
2486 appropriate section.
2488 * tc-alpha.h (TARGET_FORMAT): Rename "evax-alpha" to "vms-alpha".
2489 * makefile.vms: Merge vax/vms support.
2493 * config/obj-elf.c (obj_elf_vtable_inherit, obj_elf_vtable_entry): New.
2494 (elf_pseudo_table): Add them.
2495 * config/tc-mips.c (mips_force_relocation): Force vtable relocs.
2496 (md_apply_fix): Accept them.
2497 (mips_fix_adjustable): Don't adjust them.
2498 (tc_gen_reloc): Mung BFD_RELOC_VTABLE_ENTRY for Rel.
2499 * config/tc-ppc.c (md_apply_fix3): Accept vtable relocs.
2500 * config/tc-ppc.h (TC_FORCE_RELOCATION_SECTION): Force vtable relocs.
2501 (tc_fix_adjustable): Don't adjust them.
2505 * Makefile.am (CGEN_CPU_PREFIX): New variable.
2507 * Makefile.in: Regenerate.
2508 * configure.in: AC_SUBST cgen_cpu_prefix.
2509 * configure: Regenerate.
2513 * config/tc-sh (COND_JUMP_DELAY, COND12_DELAY_LENGTH): Define.
2514 Changed all users of COND12_DELAY.
2518 * config/tc-mn10300.c (set_arch_mach): New function.
2519 (md_pseudo_table): Add pseudo-ops to set the current machine type.
2520 (md_begin): Default to mn10300 mode.
2521 (md_assemble): Only accept instructions for the core mn10300
2522 chip and the active machine type.
2526 * subsegs.h (segment_info_type): Give the struct a name.
2527 * config/tc-h8300.h (tc_reloc_mangle): Add prototype.
2528 * config/tc-h8500.h (tc_reloc_mangle): Declare.
2529 * config/tc-sh.h (sh_coff_reloc_mangle): Add prototype.
2530 * config/tc-w65.h (tc_reloc_mangle): Declare.
2531 * config/tc-z8k.h (tc_reloc_mangle): Declare.
2535 * config/tc-v850.c (v850_comm): Restore old section
2536 after common processing.
2540 * config/obj-vms.c (Create_VMS_Object_File): Force binary file.
2544 * config/tc-h8300.c (do_a_fix_imm, build_bytes): Replace cast to
2545 char with code that explicitly sign-extends.
2549 * config/tc-v850.c (md_begin): Restore text section as the current
2550 section after creating call table sections.
2551 * config/obj-coff.h (SYM_AUXINFO): New macro to conceal ugly
2554 * config/obj-coff.c (c_symbol_merge): Replace complex expresion
2555 with call to macro SYM_AUXINFO.
2559 * Makefile.am (install-exec-local): Don't let EXEEXT interfere
2560 with the program transform name.
2561 * Makefile.in: Rebuild.
2565 * config/obj-coff.c (c_symbol_merge): Fix copying of auxiliary
2570 * config/tc-i386.c (i386_operand): Be prepared for a space between
2571 the open parenthesis and the start of the register operand,
2572 because of the June 16 change.
2576 * config/tc-sh.c (md_apply_fix): Handle weak symbols correctly if
2581 * config/tc-d30v.c (d30v_align): Always perform alignment request,
2582 even if it is belived to be unnecessary.
2586 * write.c (adjust_reloc_syms): Never adjust relocs against weak
2588 * config/tc-mips.c (md_apply_fix): Adjust accordingly.
2592 * config/tc-mn10300.c (mn10300_insert_operand): Do not hardcode the
2593 shift amount for a repeated operand. The shift amount for the
2594 repeated copy comes from the size of the operand.
2598 * config/tc-h8300.c (get_operand): Fix typos in ldm/stm support.
2602 * config/tc-mips.c (md_show_usage): Fix -mipsN usage.
2606 * app.c (do_scrub_begin): If tc_symbol_chars is defined, treat all
2607 characters in it as LEX_IS_SYMBOL_COMPONENT.
2608 * config/tc-i386.h (tc_symbol_chars): Define.
2609 (extra_symbol_chars): Declare.
2610 * config/tc-i386.c (extra_symbol_chars): Define.
2611 (comment_chars): Don't use '/' as comment start if TE_LINUX.
2612 (line_comment_chars): Set to '/' if TE_LINUX.
2613 * doc/c-i386.texi (i386-prefixes): Update.
2614 * doc/internals.texi (CPU backend): Document tc_symbol_chars.
2618 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
2619 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
2623 * config/tc-d10v.c (md_apply_fix3): Checking displacement
2624 constraint in instructions REP & REPI.
2628 * config/tc-d30v.c (md_apply_fix3): Catch BFD_RELOC_8,
2629 BFD_RELOC_16, BFD_RELOC_64 and issue appropriate error messages.
2631 (check_range): If the operand is shifted, then shift the number
2632 before checking its range.
2634 * write.c (adjust_reloc_syms): Add more checks for NULL pointers.
2636 * config/tc-v850.c (v850_comm): Set SEC_COMMON bit on special
2641 * config/tc-v850.c (v850_comm): Create special sections as needed.
2645 * config/tc-d10v.c (write_2_short): Addition of swapping
2646 instructions for sequential and reverse sequential order when
2647 given order is not possible.
2651 * Makefile.am: Rebuild dependencies.
2652 (DEP_INCLUDES): Fix reference to intl build directory.
2653 * Makefile.in: Rebuild.
2657 * doc/c-i386.texi: Update 16 bit documentation.
2659 * config/tc-i386.h: Change Data16 to Size16, Data32 to Size32,
2660 IgnoreDataSize to IgnoreSize as they are used for address size as
2662 * config/tc-i386.c: Likewise. Add code to reject addr32/data32 in
2663 32-bit mode, similarly addr16/data16 and variants.
2667 * config/tc-d30v.c (md_assemble): Fix handling of reverse
2668 sequential word multiply instructions.
2670 (do_assemble): Add extra command line argument, to allow mul32
2671 attribute to be preserved across parallel insns.
2672 (md_assemble): Insert NOPs between explicitly parallel insns which
2673 contain an 32 bit multiply and a 16 multiply.
2677 * config/tc-i386.c: REPNE renamed to REPNE_PREFIX_OPCODE, and
2680 * config/tc-i386.c (reloc): Add braces.
2682 * config/tc-i386.c (struct _i386_insn): Rename bi to sib to be
2683 consistent with Intel naming.
2684 * config/tc-i386.h (base_index_byte): Rename to sib_byte. Don't
2685 use bitfields in sib_byte.
2686 (modrm_byte): Don't use bitfields here either.
2688 * config/tc-i386.c (current_templates): Add const.
2689 (parse_register): Add const to return, param, and char *s.
2690 (i386_operand): Add const to reg_entry *r.
2691 * config/tc-i386.h (templates): Add const to start, end.
2693 Inspired by code for 16 bit gas support from Martynas Kunigelis
2695 * config/tc-i386.c (md_assemble): Add full support for 16 bit
2696 modrm, and Jump, JumpByte, JumpDword, JumpInterSegment insns.
2697 (uses_mem_addrmode): Remove.
2698 (md_estimate_size_before_relax): Add support here too.
2699 (md_relax_table): Rewrite interface to md_relax for 16 bit
2701 (BYTE, WORD, DWORD, UNKNOWN_SIZE): Remove.
2702 (opcode_suffix_to_type): Remove.
2703 (CODE16, SMALL, SMALL16, BIG, BIG16): Define.
2704 (SIZE_FROM_RELAX_STATE): Modify to suit above.
2705 (md_convert_frag): Likewise.
2706 (i386_operand): Add support for 16 bit base/index regs,
2707 immediates, and displacements. Remove some unnecessary casts, and
2708 localise end_of_operand_string, displacement_string_start,
2709 displacement_string_end variables. Add GCC_ASM_O_HACK.
2710 * config/tc-i386.h (NO_BASE_REGISTER_16): Define.
2712 * config/tc-i386.c (prefix_hash): Remove.
2713 (md_begin): Rewrite without obstacks. Remove prefix hash table
2714 handling. Rewrite lexical table handling.
2715 (i386_print_statistics): Don't print prefix statistics.
2716 (md_assemble): Rewrite instruction parser so that line is not
2717 converted to lower case. Don't do a hash_find for prefixes,
2718 instead recognise them via opcode modifier.
2719 (expecting_operand, paren_not_balanced): Localise variables.
2720 * config/tc-i386.h (IsPrefix): Define.
2721 (prefix_entry): Remove.
2723 * config/tc-i386.h (PREFIX_SEPERATOR): Don't define.
2724 * config/tc-i386.c (PREFIX_SEPARATOR): Define here instead, using
2725 '\\' in case where comment_chars contains '/'.
2727 * config/tc-i386.c (MATCH): Ensure given operand and template
2728 match for JumpAbsolute. Makes e.g. `ljmp table(%ebx)' invalid;
2729 you must write `ljmp *table(%ebx)'.
2732 * config/tc-i386.c (BFD_RELOC_16, BFD_RELOC_16_PCREL): Define
2733 as 0 ifndef BFD_ASSEMBLER.
2734 (md_assemble): Allow immediate operands without suffix or
2735 other reg operand to default in size to the current code size.
2739 * config/tc-v850.c (md_begin): Restore creation of
2740 .call_table_text and .call_table_data sections.
2744 * config/tc-d30v.c (md_assemble): Set execution type to unknown
2745 after emitting a word of noops.
2749 * config/tc-i386.c (mode_from_disp_size): Disp16 is mode 2.
2750 (i386_operand): Simplify checks for valid base/index combinations.
2751 Disallow `in 4(%dx),%al'.
2753 * config/tc-i386.c (struct _i386_insn): Make regs, base_reg, and
2755 (add_prefix): Change parameter from char to int.
2757 * config/tc-i386.h (Ugh): Define opcode modifier.
2758 * config/tc-i386.c (md_assemble): Print warnings for Ugh insns.
2760 * config/tc-i386.c (md_assemble): Rewrite MATCH and
2761 CONSISTENT_REGISTER_MATCH macros to check register types more
2762 thoroughly. Check for illegal suffix/operand combinations
2763 when matching insns with operands. Handle new `s' suffix, and
2764 associated FloatMF opcode modifier for float insns with memory
2766 * config/tc-i386.h (FloatMF): Define new opcode modifier.
2767 (No_sSuf, No_bSuf, No_wSuf, No_lSuf): Likewise.
2768 (SHORT_OPCODE_SUFFIX, LONG_OPCODE_SUFFIX): Define.
2769 * config/tc-i386.c: Rename WORD_PREFIX_OPCODE to
2770 DATA_PREFIX_OPCODE throughout.
2772 * config/tc-i386.c (REGISTER_WARNINGS): Define.
2773 (md_assemble): Rewrite suffix/register operand checking code to be
2774 more thorough. Remove Abs8,16,32. Change occurrences of Mem to
2775 AnyMem, the better to grep.
2777 (i386_operand): Don't set Mem bits in i.types[this_operand] when
2778 given a memory operand. Don't set Abs bits either.
2779 (type_names): Remove Mem*, Abs*.
2780 * config/tc-i386.h (Mem8, Mem16, Mem32, Abs8, Abs16, Abs32): Don't
2781 define opcode_modifiers as these cases are handled by Disp8,
2782 Disp16, Disp32 and suffix checks.
2783 (COMES_IN_BOTH_DIRECTIONS): Remove.
2784 (FloatR): Define. It's OK to share the bit with ReverseRegRegmem.
2786 * config/tc-i386.c (md_assemble): Don't emit operand size prefix
2787 if IgnoreDataSize modifier given. Remove ShortformW modifier
2788 test. Add test for ShortForm in W base_opcode modification.
2789 Merge Seg2ShortForm and Seg3ShortForm code.
2790 * config/tc-i386.h (ShortFormW): Remove.
2791 (IgnoreDataSize): Define.
2795 * config/tc-d30v.c (md_assemble): Store previous segment state
2796 with previous instruction.
2800 * config/tc-i386.c (SCALE1_WHEN_NO_INDEX): Define.
2801 (ebp, esp): Remove static variables.
2802 (MATCH): Remove test for InOutPortReg.
2803 (i386_operand): Properly handle InOutPortReg here instead.
2804 Disallows `inb (%dx,2)', `inb %es:(%dx)' and `mov (%dx),%ax'
2805 (md_assemble): Simplify and correct modrm and sib generation.
2806 (i386_operand): Add warning for scale without index.
2807 Rewrite checks for valid base/index combinations.
2809 * config/tc-i386.c (END_STRING_AND_SAVE): Protect arguments of
2810 macros and enclose in do while(0).
2811 (RESTORE_END_STRING): Likewise.
2812 (md_assemble): Add one to printed operand number so we start
2813 from 1 not 0. Add some more gettext invocations.
2814 (i386_operand): Fix `%%s' -> `%%%s'. Inc printed operand
2817 * config/tc-i386.h (WAIT_PREFIX, LOCKREP_PREFIX, ADDR_PREFIX,
2818 DATA_PREFIX, SEG_PREFIX): Define.
2819 * config/tc-i386.c (struct _i386_insn): Remove wait_prefix field.
2820 (check_prefix): Remove function.
2821 (add_prefix): New function. Add prefix to i.prefix as well as
2823 (md_assemble): Changes for add_prefix. Remove hack for wait
2824 prefix, instead always output prefixes in fixed order. Test
2825 for jcxz/loop when selecting between word & dword operations,
2826 and add address size prefix rather than operand size prefix.
2827 Remove operand -> address size hack when emitting jcxz/loop.
2828 (i386_operand): Remove O_Absent check as it's done in expr.
2832 * configure.in: Recognize m5200 as a cpu_type of m68k.
2833 * aclocal.m4: Rebuild with current libtool.
2834 * configure: Rebuild.
2838 * config/tc-m68k.c (md_estimate_size_before_relax): Add more calls
2839 to relaxable_symbol to prevent references to external symbol from
2844 * config/tc-m68k.c (relaxable_symbol): If TARGET_OS is "elf", all
2845 symbols are relaxable.
2849 * config/tc-v850.c (md_begin): Don't create special
2850 sections by default.
2854 * config/tc-mips.c (macro): For div and udiv, close the
2855 reorder block as soon as possible.
2860 * macro.c (macro_mri_mode): New function.
2861 * macro.h (macro_mri_mode): Declare.
2862 * read.c (s_mri): Call macro_mri_mode when switching in and out of
2867 * config/tc-alpha.c (s_alpha_comm): Allow alignment parameter in
2870 * config/tc-alpha.c (s_alpha_comm): Defer restoring character
2871 until after xstrdup in OBJ_EVAX case.
2875 * config/tc-vax.c (md_create_short_jump): Fix off by two bug in
2876 offset calculation. Also, use VAX_BRW from vax-inst.h instead
2877 of hardcoded magic number.
2878 (md_create_long_jump): Use VAX_JMP and VAX_ABSOLUTE_MODE macros.
2882 * read.c (do_s_func): New function.
2884 * read.h (do_s_func): Add prototype.
2888 * config/tc-m32r.c (m32r_do_align): Only fill code sections with
2889 nops if fill pattern not specified.
2894 * config/te-go32.h (TE_GO32): Define.
2895 * config/tc-i386.h (LOCAL_LABEL): Don't define if TE_GO32.
2899 Implement .func/.endfunc pseudo-ops.
2900 * read.h (stabs_generate_asm_func,stabs_generate_asm_endfunc): Declare.
2902 * read.c (potable): Add .func,.endfunc.
2903 (s_func): New function.
2904 * stabs.c (stabs_generate_asm_func,stabs_generate_asm_endfunc): New
2906 (in_doc_func_p,current_function_label): New static globals.
2907 (stabs_generate_asm_lineno): Emit function relative stabs if in .func.
2911 * config/tc-a29k.h (WORKING_DOT_WORD): Define.
2912 * config/tc-alpha.h (WORKING_DOT_WORD): Define.
2913 * config/tc-arm.h (WORKING_DOT_WORD): Define.
2914 * config/tc-h8300.h (WORKING_DOT_WORD): Define.
2915 * config/tc-h8500.h (WORKING_DOT_WORD): Define.
2916 * config/tc-hppa.h (WORKING_DOT_WORD): Define.
2917 * config/tc-i860.h (WORKING_DOT_WORD): Define.
2918 * config/tc-i960.h (WORKING_DOT_WORD): Define.
2919 * config/tc-tic30.h (WORKING_DOT_WORD): Define.
2920 * config/tc-w65.h (WORKING_DOT_WORD): Define.
2921 * config/tc-z8k.h (WORKING_DOT_WORD): Define.
2922 * config/tc-a29k.c: Don't define md_short_jump_size,
2923 md_long_jump_size, md_create_short_jump or md_create_long_jump.
2924 * config/tc-alpha.c: Likewise.
2925 * config/tc-alpha.h: Likewise.
2926 * config/tc-arm.c: Likewise.
2927 * config/tc-h8300.c: Likewise.
2928 * config/tc-h8500.c: Likewise.
2929 * config/tc-hppa.c: Likewise.
2930 * config/tc-i860.c: Likewise.
2931 * config/tc-i960.c: Likewise.
2932 * config/tc-ppc.c: Likewise.
2933 * config/tc-sh.c: Likewise.
2934 * config/tc-sparc.h: Likewise.
2935 * config/tc-tic30.c: Likewise.
2936 * config/tc-w65.c: Likewise.
2937 * config/tc-z8k.c: Likewise.
2941 * config/tc-vax.c (_): Delete this macro used for placeholder
2942 values in vax_operand_width_size; it conflicts with the _() macro
2943 used for internationalization.
2947 * symbols.c (symbol_find_base): Fix case insensitive symbol name
2951 * struc-symbol.h (struct broken_word): Add seg and subseg fields.
2952 * read.c (emit_expr): Initialize seg and subseg fields of a new
2954 * write.c (write_object_file): Switch to the appropriate segment
2955 and subsegment when processing a broken word.
2957 * config/tc-m68k.c (mri_assemble): New static function.
2958 (build_mri_control_operand): Call mri_assemble rather than
2960 (s_mri_else, s_mri_break, s_mri_next, s_mri_for): Likewise.
2961 (s_mri_endf, s_mri_endw): Likewise.
2965 * read.c (s_org): Call md_flush_pending_output if it is defined.
2967 * config/tc-sparc.c (md_show_usage): Add \n\ to new string.
2971 * config/tc-sparc.c (OPTION_LITTLE_ENDIAN_DATA): New.
2972 (md_parse_option): Add for same.
2973 (sparc_md_end): Set bfd_mach_sparc_sparclite_le.
2974 (md_apply_fix3, tc_gen_reloc): Allow BFD_RELOC_SPARC_32LE.
2975 (cons_fix_new_sparc): Added to create BFD_RELOC_SPARC_32LE.
2977 * config/tc-sparc.h (cons_fix_new_sparc): Added.
2981 * config/tc-arm.c (find_real_start): Relax definition of local
2986 * config/tc-d30v.c (d30v_align): Apply address adjustment to all
2987 symbols at the given address, not just the last one specified.
2991 * config/tc-sparc.c (sparc_handle_align): Use number_to_chars_bigendian
2992 or number_to_chars_littleendian to write data.
2996 * config/tc-v850.c (md_assemble): Remove artificially created
2997 register name symbols.
3001 * write.c (fixup_segment): Change "segment" to "section" in
3006 * write.c (fixup_segment): Change sym1-sym2 message again.
3010 * write.c (fixup_segment): Improve error message for sym1-sym2
3011 errors when sym1 is in a different segment from sym2.
3015 * config/tc-m32r.c (warn_unmatched_high): New static local.
3016 (OPTION_WARN_PARALLEL): Rename from OPTION_WARN.
3017 (OPTION_NO_WARN_PARALLEL): Rename from OPTION_NO_WARN.
3018 (md_longopts): Recognize --{no-,}warn-unmatched-high.
3019 (md_parse_option): Likewise.
3020 (md_show_usage): Likewise.
3021 (m32r_frob_file): Likewise.
3023 * read.c (generate_file_debug,generate_lineno_debug): New functions.
3024 (read_a_source_file): Call them.
3025 * read.h (stabs_generate_asm_file): Declare.
3026 * stabs.c (stabs_generate_asm_file): New function.
3027 (generate_asm_file): New function.
3028 (stabs_generate_asm_lineno): Move file name handling into
3033 * config/tc-d30v.c (cur_mul32_p, prev_mul32_p): Make static.
3034 (d30v_current_align, d30v_current_align_seg): New variables.
3035 (d30v_last_label): New variable.
3036 (d30v_align, s_d30v_align, s_d30v_text): New functions.
3037 (s_d30v_data, s_d30v_section): Likewise.
3038 (md_pseudo_table): Call them.
3039 (md_begin): Initialize d30v_current_align_seg.
3040 (md_assemble): Call d30v_align when needed by known current alignment.
3041 (d30v_frob_label, d30v_cons_align): New functions.
3042 * config/tc-d30v.h (md_do_align): Remove.
3043 (tc_frob_label): Call d30v_frob_label.
3044 (md_cons_align): New.
3046 * config/tc-d30v.c (find_format): Convert complex expressions to
3047 expression symbols before processing. Clean up code formatting.
3051 * po/Make-in (install-info): New target.
3055 * config/tc-mn10200.c (md_assemble): Handle "bra" just like "jmp"
3057 * config/tc-mn10300.c (md_assemble): Likewise.
3061 * Makefile.am: Update with `make dep-am'.
3062 (HFILES): Add cgen.h.
3063 (cgen.o): Depend on cgen.h.
3064 * Makefile.in: Regenerate.
3066 * cgen.c (cgen_md_apply_fix3): Don't pass newline to as_warn_where.
3070 * gasp.c (grab_label): Permit a label to be a preprocessor
3071 variable by permitting a label to start with a backslash.
3075 * config/tc-mips.c (validate_mips_insn): Removed hack
3076 for previously inaccessible bitfields in some INSN_TRAP
3081 * config/tc-d30v.c (do_assemble): Abort with error message
3082 if opcode operands do not match.
3086 * config/tc-mips.c (macro_build, validate_mips_insn): Implement
3087 'q' operand format for 20-bit "break"/"sdbbp" instructions.
3088 (mips_ip): Truncate overflowed "break" 'c' operand. Implement
3089 similar new 'q' operand.
3093 * cgen.c (cgen_asm_finish_insn): Fix typo.
3098 * cgen.c: Include it.
3099 (MAX_FIXUPS): Renamed to CGEN_MAX_FIXUPS.
3100 (cgen_asm_finish_insn): Result is now void. New arg `result'.
3101 All callers updated.
3102 * config/tc-m32r.c: Include cgen.h.
3103 (m23r_insn): New members num_fixups,fixups.
3107 * config/tc-hppa.c (md_apply_fix): Slightly rework some code
3108 to avoid compiler warning.
3112 * makefile.vms: Run dec c with /nodebug. Pass CC value when
3115 * makefile.vms (OBJS): Add ehopt.obj
3119 * doc/c-vax.texi: Correct and extend vax/vms documentation.
3123 * config/tc-d30v.c (do_assemble): Accept a new parameter requesting
3124 a short format insn.
3125 (md_assemble): Set it for explicitly packed insns.
3129 * config/obj-coff.c (c_symbol_merge): Do not take address of
3130 native fields when performing the memcpy.
3134 * config/tc-mips.c (macro,macro2): Implement
3135 M_DMULO_I, M_MULO_I, M_DMULOU_I, and M_MULOU_I.
3139 * config/tc-m68k.h (TC_RELOC_RTSYM_LOC_FIXUP): Changed to keep
3140 relocations against globally visible symbols.
3141 * config/tc-m68k.c (relaxable_symbol): New macro.
3142 (m68k_ip, md_estimate_size_before_relax): Use it.
3143 (tc_m68k_fix_adjustable): Also handle weak symbols.
3147 * config/tc-i386.h (TC_RELOC_RTSYM_LOC_FIXUP): Keep relocs for all
3148 references to externally visible symbols.
3149 * config/tc-i386.c (md_apply_fix3): When OBJ_ELF, don't add the
3150 values in twice for a PC relative reloc if the symbol is
3153 * config/tc-sparc.h (tc_fix_adjustable) [OBJ_AOUT]: When PIC,
3154 don't adjust a PC relative reloc against an externally visible
3156 * config/tc-sparc.c (md_apply_fix3): When generating a.out PIC,
3157 for a PC relative fixup against an externally visible defined
3158 symbol, arrange to store object file and addend values as though
3159 the symbol were not defined.
3160 (tc_gen_reloc): Likewise.
3164 * read.c (sizeof_leb128): Referenced externally by write.c so
3169 * config/tc-m32r.c ({,expand_}debug_sym): New functions to record
3170 and expand a 'debug' symbol associated with the next instruction
3171 that does not cause a short instruction to be filled with a NOP.
3172 (md_pseudo_table): Add support for .debugsym.
3173 (assemble_parallel_insn): Add calls to expand_debug_sym as
3175 (md_assemble): Ditto.
3179 * as.c (main): Conditionally call setlocale.
3180 * gasp.c (main): Likewise.
3181 * asintl.h: Include <locale.h> if HAVE_LOCALE_H.
3182 (LC_MESSAGES): Now can be defined even when ENABLE_NLS.
3186 * config/tc-d30v.c (md_show_usage): Correct gettext typo.
3190 * config/tc-hppa.c: Change all calls to bzero to use memset.
3191 (pa_ip): Add cast to avoid warning.
3192 (tc_gen_reloc, md_apply_fix): Likewise.
3193 (pa_find_space_by_number): Likewise.
3194 (hppa_force_relocation): Likewise.
3195 (pa_block): Change i to unsigned int.
3196 * config/obj-som.h (obj_som_copyright): Declare.
3200 * ecoff.c (ecoff_build_lineno): Do not use dummy first_lineno
3201 for line numbers for assembly source.
3205 * configure.in: Change version number to 2.9.4
3206 * configure: Rebuild.
3210 * cgen.c (cgen_asm_finish_insn): New arg relax_p. All callers updated.
3214 * ecoff.h: Change symbolS in function declaration to struct
3219 * config/tc-sh.c (parse_reg): Add casts to avoid warnings.
3220 (md_convert_frag): Fix i18n typo.
3224 * ecoff.c (ecoff_get_cur_proc_sym): New function.
3225 * ecoff.h: Protoype it.
3226 * config/tc-alpha.c [ELF] (s_alpha_prologue): New function.
3227 [EVAX] (s_alpha_prologue): Delete.
3228 (md_pseudo_table): Update.
3232 * config/tc-i960.c (md_assemble): Change bp_error_msg from static
3233 array to local pointer.
3234 (get_args, parse_expr): Add casts to avoid warnings.
3238 * read.c (s_set): Cast xmalloc return value to fragS *.
3239 * config/tc-m68k.c (m68k_ip): Function made static to match
3240 previous forward declaration.
3241 (insert_reg, init_regtable, md_convert_frag_1): Likewise.
3245 * config/tc-v850.c: Add internationalisation macros to error
3248 * config/tc-m32r.c (can_make_parallel): Add internationalisation
3249 macros to error strings.
3253 * config/tc-ppc.c (ppc_fix_adjustable): Correct test of whether a
3254 reloc is in the TOC csect.
3255 (md_apply_fix3): Correct gettext typo.
3259 * config/tc-arm.c (find_real_start): Ignore symbols starting with
3260 .L - they are local labels and the branches are not really
3261 function calls but rather far jumps.
3265 * po/Make-in (MKINSTALLDIRS): Don't look in $(top_srcdir).
3269 * config/tc-i386.c (md_assemble): Print operand number rather than
3270 using ordinal_names.
3271 (i386_operand): Likewise.
3275 * Makefile.am (INTLLIBS): Define to work around apparent automake
3277 All Makefiles: Regenerated.
3279 * Many files: Added gettext invocations around user-visible
3281 * acconfig.h (ENABLE_NLS, HAVE_CATGETS, HAVE_GETTEXT, HAVE_STPCPY,
3282 HAVE_LC_MESSAGES): Define.
3283 * dep-in.sed: Added asintl.h.
3284 * po/Make-in: New file.
3285 * gasp.c (main): Call setlocale, bindtextdomain, and textdomain.
3287 * read.c (Z_): Renamed from `_'.
3288 * Makefile.am (SUBDIRS): Added po.
3289 (POTFILES): new macro.
3290 (po/POTFILES.in): New target.
3291 ($(OBJS)): Added asintl.h.
3293 (INCLUDES): Added -DLOCALEDIR, -I$(top_srcdir)/../intl.
3294 (as_new_LDADD): Added $(INTLLIBS).
3295 (as_new_DEPENDENCIES): Added $(INTLDEPS).
3296 (gasp_new_LDADD): Added $(INTLLIBS).
3297 (gasp_new_DEPENDENCIES): New macro.
3298 * configure, aclocal.m4: Rebuilt.
3299 * configure.in: Call CY_GNU_GETTEXT. Generate po/Makefile.in and
3301 (ALL_LINGUAS): Define.
3302 * macro.c: Include "asintl.h".
3303 * as.c (main): Call setlocale, bindtextdomain, and textdomain.
3304 * as.h: Include "asintl.h".
3305 * config/tc-i386.c (ordinal_names): Removed.
3306 (md_assemble): Changed error text to avoid ordinal_names.
3307 (i386_operand): Likewise.
3308 (reloc): Added as_bad to avoid i18n problems.
3309 (tc_gen_reloc): Likewise.
3310 * config/tc-arm.c (bad_args): Now a #define.
3312 * config/obj-vms.c (VMS_stab_parse): Changed type of
3314 (global_symbol_directory): Unified strings to avoid i18n
3316 * config/tc-m68k.c (get_reloc_code): Added some as_bad calls to
3317 avoid i18n problems.
3318 * config/tc-ns32k.c (reloc): Added as_bad to avoid i18n problems.
3319 * config/tc-ppc.c (md_apply_fix3): Added as_bad_where to avoid
3321 * config/tc-sh.c (md_convert_frag): Added as_bad to avoid i18n
3323 * config/tc-v850.c (md_assemble): Changed C++ comment into C
3325 * config/tc-vax.c (md_assemble): Added as_warn to avoid i18n
3327 * as.c (print_version_id): Added an fprintf to avoid i18n
3329 * cond.c (cond_finish_check): Added as_bad call to avoid i18n
3331 * expr.c (expr): Added as_warn call to avoid i18n problems.
3332 * messages.c (as_assert): Changed code to avoid i18n problems.
3333 (as_abort): Likewise.
3334 * read.c (pseudo_set): Added as_bad call to avoid i18n problems.
3335 (s_space): Likewise.
3336 * po/Make-in, po/POTFILES.in, po/gas.pot: New files.
3340 * config/tc-i386.c (check_prefix): New static function, split out
3342 (struct _i386_insn): Add wait_prefix field.
3343 (md_assemble): Remove wait_prefix local variable. Use
3344 check_prefix when adding a prefix.
3346 * config/tc-i386.c (current_templates): New static variable.
3347 (md_assemble): Remove current_templates local variable.
3348 (md_assemble, i386_operand): Improve error and warning messages in
3349 many places. Add RESTORE_END_STRING in many places before error
3350 return. Clarify some comments.
3352 * config/tc-i386.c (struct _i386_insn): Change seg field to a two
3354 (md_assemble): Parse string instruction operands, looking for
3355 segment override prefixes. Check for invalid segment prefixes on
3357 (i386_operand): i.seg[] and max mem_operand changes for string
3359 * config/tc-i386.h (EsSeg): Define.
3361 * config/tc-i386.h (regKludge): Define.
3362 (iclrKludge, imulKludge): Don't define.
3363 * config/tc-i386.c (md_assemble): Merge imulKludge and iclrKludge
3364 code. Move ReverseRegRegmem fudges into Modrm case. Reorder
3365 opcode_modifier checks to look for more common cases first. Add
3366 default_seg for IsString case.
3370 * configure.in: Call AM_PROG_LEX rather than AC_PROG_LEX and
3372 * configure: Rebuild with new automake and libtool.
3373 * aclocal.m4, Makefile.in: Likewise.
3375 * doc/Makefile.am (as.dvi): New target.
3376 * doc/Makefile.in: Rebuild.
3380 * configure.in: Added sparc86x support.
3382 * configure: Rebuild.
3384 * config/tc-sparc.c (lookup_arch): Added arch_type to struct
3386 (md_parse_option): Warn if -EL is not supported for this architecture.
3388 * config/tc-sparc.h (SPARC_BIENDIAN) Always define.
3392 * config/tc-mips.c (mips_ip): Note when we use get match on
3393 the full instruction name.
3397 * symbols.c (resolve_symbol_value) [O_symbol]: Also store the symbol
3398 back into the expression to handle add/sub simplification correctly.
3402 * config/tc-mips.c (hilo_interlocks): Remove 4300.
3406 * config/tc-arm.c (do_msr): Support undocumented 'msr cpsr_flg,
3411 * symbols.c (max_indent_level): New global.
3412 (print_symbol_value_1): Use it.
3413 * expr.h (expr_build_dot): Declare.
3414 * expr.c (expr_build_dot): New function.
3418 * symbols.c (print_binary): New function.
3419 (print_expr_1): Call it.
3423 * config/tc-m68k.c (m68k_ip, case "#B"): Install the offset of the
3424 operand in the opcode.
3428 * config/tc-i386.h: Reorder operand flags and opcode modifier
3429 flags for clarity. Remove unused definitions: Unknown,
3430 ImmUnknown, DispUnknown, NoModrm.
3431 * config/tc-i386.c (type_names): Add missing Debug type.
3432 (md_assemble): Better duplicate prefix checking. Quicker string
3433 instruction check via new opcode_modifier flag.
3437 * doc/as.texinfo (Invoking): Clarify -Wa example.
3441 * config/tc-mips.c (mips_pseudo_table): Add weakext entry.
3442 (s_mips_weakext): Define.
3443 * ecoff.c (ecoff_directive_weakext): Don't define if defined(TC_MIPS).
3444 * config/obj-ecoff.c (obj_pseudo_table): Don't add weakext if
3449 * config/tc-mn10200.c (tc_gen_reloc): The difference of two symbols
3450 is an error if the value can not be computed at assembly time.
3451 * config/tc-mn10300.c (tc_gen-reloc): Likewise.
3455 * gasp.c (main): Set next field of new include_path structure to
3458 * read.c (s_mri_sect): Call as_bad rather than abort for an
3459 unsupported MRI target.
3463 * config/tc-arm.c (arm_validate_fix): New function. Determine if
3464 the destination of a branch instruction should be altered.
3465 (find_real_start): New function: Locate the real, Thumb coded
3466 start of a Thumb function.
3467 (do_t_branch23): Alter the destination of branches to Thumb
3470 * config/tc-arm.h: Define TC_VALIDATE_FIX.
3474 * config/tc-arm.c (decode_shift): Handle addressing mode 2 w/rrx
3479 * doc/as.texinfo: Use @itemx for a secondary item in a table.
3480 * doc/c-hppa.texi: Likewise.
3484 * Makefile.am: Rebuild dependencies.
3485 * Makefile.in: Rebuild.
3487 * Makefile.am (DEP_INCLUDES): New variable.
3488 (.dep1): Change to work when srcdir is not an absolute path.
3489 (.tcdep, .objdep, .dep2, dep.sed): Likewise.
3490 * Makefile.in: Rebuild.
3494 * config/tc-i386.h, config/tc-i386.c: Revert March 24
3495 LinearAddress patch.
3497 * configure.in: Set version to 2.9.1.
3498 * configure: Rebuild.
3500 * Branched binutils 2.9.
3504 * config/tc-i386.h (FWait): Define.
3505 * config/tc-i386.c (md_assemble): Emit fwait prefix before any
3506 other prefixes. Check FWait flag in opcode table to see which
3507 instructions require an fwait prefix.
3511 * stabs.c (get_stab_string_offset): Always create a stab string
3516 Fix some gcc -Wall warnings:
3517 * atof-generic.c (atof_generic): Add casts to avoid warnings.
3518 * ehopt.c (eh_frame_code_alignment): Likewise.
3519 * expr.c (integer_constant, operand): Likewise.
3520 * frags.c (frag_align): Likewise.
3521 * gasp.c (level_0, change_base, doinstr): Likewise.
3522 * hash.c (hash_ask): Likewise.
3523 * listing.c (listing_page, calc_hex, print_lines): Likewise.
3524 (debugging_pseudo): Likewise.
3525 * macro.c (define_macro, check_macro): Likewise.
3526 * read.c (read_a_source_file, s_align, s_float_space): Likewise.
3527 (ignore_rest_of_line, float_cons): Likewise.
3528 * symbols.c (decode_local_label_name): Likewise.
3529 * write.c (record_alignment, cvs_frag_to_fill): Likewise.
3530 (fixup_segment, number_to_chars_bigendian): Likewise.
3531 (number_to_chars_littleendian): Likewise.
3532 * config/atof-ieee.c (gen_to_words): Likewise.
3533 * config/tc-sparc.c (md_begin, md_assemble): Likewise.
3534 (sparc_ip, parse_keyword_arg, s_common): Likewise.
3535 * read.c (output_big_sleb128): Initialize locals to avoid
3537 (output_big_uleb128, equals): Likewise.
3538 * atof-generic.c (atof_generic): Change number_of_digits_* locals
3539 to unsigned int. Change zeros to unsigned int.
3540 * cond.c (s_if): Add return to default case.
3541 * frags.c (frag_now_fix): Change return type to addressT.
3542 * frags.h (frag_now_fix): Update declaration.
3543 * listing.c (file_info_struct): Change linenum to unsigned int.
3544 (struct list_info_struct): Change hll_line to unsigned int.
3545 (print_source): Update format string.
3546 * read.c (emit_expr): Change scan to unsigned int, and don't
3547 bother to initialize it.
3548 * symbols.c (dollar_label_count): Change to unsigned long.
3549 * write.c (adjust_reloc_syms): Remove unused label reduce_fixup.
3550 * config/tc-sparc.c (sparc_memory_model): Only define if OBJ_ELF.
3551 * config/tc-sparc.c (tc_gen_reloc): Add return to default case.
3555 * config/tc-m68k.c (m68k_ip): Check legal addressing modes for
3556 mcf5200 just as we do for m68000.
3557 (m68k_init_after_args): Likewise.
3558 (md_estimate_size_before_relax): Likewise.
3562 * config/tc-v850.c (md_assemble): Store relocation addend in
3563 fixup instead of instruction.
3567 * config/tc-i386.c (md_assemble): Swap template arguments to
3568 CONSISTENT_REGISTER_MATCH macro in reverse direction test.
3569 This macro is currently symmetric, so passing them the wrong
3570 way didn't cause any problem, but may if the macro is changed
3572 After copying template to i.tm, use i.tm. rather than t-> to
3573 access fields, and make t a const*
3574 Move i.tm.operand_types[] swap to immediately after the copy.
3578 * expr.h (expr_build_uconstant): Add prototype.
3579 (expr_build_unary,expr_build_binary): Add prototypes.
3580 * expr.c (expr_build_uconstant): New function.
3581 (expr_build_unary,expr_build_binary): New functions.
3585 * gasp.c (IS*): Cast argument to unsigned char, not unsigned int.
3586 * macro.c (macro_expand_body): Increase buffer size.
3587 * messages.c (as_warn): Likewise.
3588 (as_warn_where, as_bad, as_bad_where): Likewise.
3593 * Makefile.am (DISTSTUFF): New variable.
3594 (diststuff): New target.
3595 * Makefile.in: Rebuild.
3599 * config/tc-m32r.h (md_cleanup, md_elf_section_change_hook): Call
3600 m32r_elf_section_change_hook.
3602 * config/tc-m32r.c (m32r_elf_section_change_hook): New function to
3603 emit a nop if a section ends with a 16 bit instruction.
3607 * config/obj-coff.c (obj_coff_bss): Compile unconditionally. Call
3608 s_lcomm rather than obj_coff_lcomm.
3609 (obj_pseudo_table): Compile .bss pseudo-op unconditionally.
3613 * config/tc-i386.h (LinearAddress): Define.
3614 * config/tc-i386.c (md_assemble): If LinearAddress is set for the
3615 instruction, don't use a default segment.
3619 * configure.in: (sh*-*-rtems*): Switched from ELF to COFF.
3620 * configure: Rebuild.
3624 * aclocal.m4, configure: Rebuild with libtool 1.2.
3628 * config/tc-arm.c (md_apply_fix3): fix code to test the range of
3629 PC relative branches. Patch courtesy of Jonathan Walton.
3634 * configure.in (emulations): Add thumb-pe target.
3636 * configure (emulations): Add thumb-pe target.
3640 * itbl-lex.l (yywrap): Don't define if already defined as a
3645 * depend.c (quote_string_for_make): New function.
3646 (wrap_output): Use it.
3650 * config/obj-elf.c (obj_elf_section): Set bss flag in seg_info
3651 structure if type is SHT_NOBITS. [Bug fix courtesy of rth]
3655 * config/tc-alpha.c (md_shortopts, md_longopts, md_parse_option):
3656 Recognize -GN and -relax.
3657 (md_begin): Initialize gp size from -G switch.
3658 (alpha_force_relocation): Always force if -relax.
3659 (alpha_align): Take a new argument that will specify when to
3660 emit an R_ALPHA_ALIGN relocation (though we don't do that now).
3661 Change all callers. Emit nop alignment padding as nop+unop pair.
3665 * config/obj-elf.c [TC_ALPHA]: Include <elf/alpha.h>.
3666 * config/tc-alpha.h (ELF_TC_SPECIAL_SECTIONS): New.
3670 * config/tc-d30v.c (write_2_short): Delayed jsr instructions don't
3671 require padding to the next long word boundary.
3675 * cgen.c: #include symcat.h.
3676 * config/tc-m32r.c: Likewise.
3680 * config/tc-mips.c (mips_ip, case 'P'): Make 'P' arguments be
3681 absolute expressions instead of '$' prefixed register names.
3685 * read.c (s_set): Record file and line info for symbols when -as.
3686 (pseudo_set): Don't overwrite that dummy fragment.
3690 * config/tc-ppc.c (md_pseudo_table): Add "section".
3691 (ppc_named_section): New static function.
3695 * tc-ppc.c (ppc_biei): Cache the last symbol we inserted
3696 so we don't have to scan the entire list.
3700 * config/tc-d30v.c (parallel_ok): For the explicitly parallel
3701 case, allow the parallel instructions to modify the same flag
3706 * listing.c (list_symbol_table): Categorize symbols by
3707 undefined_section rather than sy_frag->line == NULL.
3711 * Makefile.am (install-exec-local): Install properly when ln
3712 fails or tooldir == prefix.
3716 * cgen.c (cgen_md_apply_fix3): Delete call to validate_operand.
3717 Test result of insert_operand for error.
3721 * Makefile.am (AUTOMAKE_OPTIONS): Add cygnus.
3722 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
3723 * doc/Makefile.am (AUTOMAKE_OPTIONS): Define.
3724 * doc/Makefile.in: Rebuild.
3728 * config/tc-mips.c (macro_build): Handle operand type 'C'.
3729 (macro): Fix handling of M_COP[0-3].
3734 * macro.c (ISSEP): Only treat '<' and '>' as separator characters
3735 if macro_alternate or macro_mri.
3736 (getstring): Remove support for byte constants between < and >.
3737 (get_any_string): '<' only starts a string if macro_alternate or
3739 (macro_expand_body): Permit keyword parameters following
3740 positional parameters.
3743 * configure.in (alpha*-*-netbsd*): New target.
3744 * config/te-nbsd.h (LOCAL_LABELS_FB): Define.
3745 * configure: Rebuild.
3747 * as.h (flag_warn_suppress_instructionswap): Move from here...
3748 * config/tc-d10v.c (flag_warn_suppress_instructionswap): ...to
3749 here, and make static.
3751 * ehopt.c (eh_frame_code_alignment): Only use seg_info if
3752 BFD_ASSEMBLER or MANY_SEGMENTS.
3754 * as.c (show_usage): Update bug-gnu-utils address.
3755 * gasp.c (show_usage): Likewise.
3756 * doc/as.texinfo (Bug Reporting): Likewise.
3760 * config/tc-mips.c (load_address): Don't use mips III or mips IV
3761 insns regardless of the size of a pointer if we're in mips I or
3763 (macro, macro2, s_cprestore, s_cpadd): Likewise.
3767 Fix rac to accept only a0:
3768 * tc-d10v.c (parallel_ok, find_opcode):
3769 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
3770 Introduce OPERAND_GPR.
3774 * read.c (s_fill): Handle non-constant repeat counts by creating
3775 an rs_space fragment.
3779 * config/tc-i386.c (i386_operand): Change error added Jan 2 1998
3780 from as_bad to as_warn.
3784 * as.c: (perform_an_assembly_pass): Use [TEXT|DATA|BSS]_SECTION_NAME
3785 * as.h: Define default values of [TEXT|DATA|BSS]_SECTION_NAME
3786 * config/obj-elf.c (elf_begin): Use [TEXT|DATA|BSS]_SECTION_NAME
3790 * ehopt.c (eh_frame_code_alignment): If not BFD_ASSEMBLER, use
3791 seg_fix_rotP rather than fix_root from seg_info.
3795 * expr.c: Add support for 0x1_2_3_4 bignums.
3799 * configure.in: Change -linux* to -linux-gnu*.
3800 * configure: Rebuild.
3802 * app.c (do_scrub_begin): Treat \r as whitespace.
3806 * Makefile.am: Update dependencies.
3807 * Makefile.in: Rebuild.
3811 * configure, aclocal.m4: Rebuild with new libtool.
3815 * config/tc-mips.c (md_begin): If mips_cpu is set, then use it as
3816 the argument to bfd_set_arch_mach.
3817 (load_address): Use bfd_arch_bits_per_address to determine the
3818 bit size of an address instead of looking at the isa level.
3819 (macro, macro2, s_cprestore, s_cpadd): Likewise.
3823 * config/tc-v850.c (md_parse_option): Add -mv850any command line option.
3827 * ehopt.c: New file.
3828 * as.h (enum _relax_state): Add rs_cfa.
3829 (check_eh_frame, eh_frame_estimate_size_before_relax): Declare.
3830 (eh_frame_relax_frag, eh_frame_convert_frag): Declare.
3831 * read.c (emit_expr): Call check_eh_frame.
3832 * write.c (cvt_frag_to_fill): Handle rs_cfa.
3833 (relax_segment): Likewise.
3834 * Makefile.am: Rebuild dependencies.
3835 (GAS_CFILES): Add ehopt.c.
3836 (GENERIC_OBJS): Add ehopt.o.
3837 * doc/internals.texi (Frags): Document rs_cfa.
3839 * as.c (show_usage): Mention --traditional-format.
3840 (parse_args): Accept --traditional-format.
3841 * as.h (flag_traditional_format): Declare.
3842 * output-file.c (output_file_create): If flag_traditional_format,
3843 set BFD_TRADITIONAL_FORMAT on stdoutput.
3844 * doc/as.texinfo, doc/as.1: Document --traditional-format.
3846 * config/tc-mips.c (append_insn): Make sure that if we have a
3847 fixup for an unmatched %hi reloc, it does not associated with a
3850 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
3851 * doc/Makefile.in: Likewise.
3855 * config/tc-m32r.c (check_for_side_effects): New function.
3856 (can_make_parallel): Add checks for instruction side effects
3857 clashing with the other instruction.
3858 (assemble_parallel_insn): Improve warning messages. Return error
3859 message from non-swapped instruction order.
3863 * config/tc-arm.c: Rename arm_after_pass_hook() to arm_cleanup().
3865 * config/tc-arm.h: Replace md_after_pass_hook definition with a
3866 md_cleanup definition. This moves the forced literal output to
3867 the end of the source pass, and avoids macro's inserting literals
3868 into the code immediately after the macro expansion.
3872 * config/tc-sparc.h (tc_fix_adjustable) [OBJ_ELF]: A reloc against
3873 a gas internal symbol is adjustable.
3874 * config/tc-ppc.h (tc_fix_adjustable): Likewise.
3876 * as.h: If gcc version greater than 2.6, use `__format__' and
3877 `__printf__' in function attributes, rather than `format' and
3882 * config/tc-sparc.c: Only include elf/sparc.h if OBJ_ELF.
3886 Add tms320c30 support:
3887 * config/tc-tic30.h: New file.
3888 * config/tc-tic30.c: New file.
3889 * config/obj-coff.h: If TC_TIC30, include coff/tic30.h and define
3890 TARGET_FORMAT as "coff-tic30".
3891 * configure.in (tic30-*-*aout*, tic30-*-*coff*): New targets.
3892 * Makefile.am: Rebuild dependencies.
3893 (CPU_TYPES): Add tic30.
3894 (CPU_OBJ_VALID): tic30-aout is valid.
3895 (TARGET_CPU_CFILES): Add config/tc-tic30.c.
3896 (TARGET_CPU_HFILES): Add config/tc-tic30.h.
3897 * configure, Makefile.in: Rebuild.
3901 * config/tc-v850.c (md_assemble): Improvements to error messages.
3905 * config/tc-ppc.c (md_apply_fix3): Change BFD_RELOC_HI16 and
3906 BFD_RELOC_HI16_S to store the high bits of any value.
3908 * config/tc-ppc.h (tc_fix_adjustable): Undo change of Fri Jun 27.
3909 (TC_RELOC_RTSYM_LOC_FIXUP): Don't let the
3910 assembler calculate relocations to any external symbol at all.
3911 * config/tc-ppc.c (md_apply_fix3) [OBJ_ELF]: Correct bugs
3912 involving generation of pc-relative relocs.
3913 (md_pcrel_from_section) [OBJ_ELF]: The job this code used to do
3914 has been moved to md_apply_fix3.
3916 * config/tc-ppc.c (md_apply_fix3): Fix test for too-far branch.
3917 (ppc_elf_suffix): Warn about 'identifier+constant@got' syntax,
3918 which actually means (the address of identifier's GOT entry) +
3919 constant, which is not particularly useful.
3923 * read.h (include_dirs): Declare.
3924 (include_dir_count,include_dir_maxlen): Declare.
3928 * configure.in: Correct check for shared opcodes library.
3929 * configure: Rebuild.
3931 * listing.c (buffer_line): If we can't open the file, set at_end.
3932 (listing_print): Remove unused local variable fi.
3934 * config/m68k-parse.y (reglistpair): Handle register list in
3937 * config/vms-conf.h: Don't undef VERSION.
3941 * Makefile.am (CONFIG_OBJS): New variable, containing part of old
3943 (GENERIC_OBJS): New variable, with the rest of the old OBJS
3945 (OBJS): Now just $(CONFIG_OBJS) and $(GENERIC_OBJS).
3946 ($(srcdir)/make-gas.com): Rename from make-gas.com.
3947 (stamp-mk.com): Replace $(OBJS) with $(GENERIC_OBJS).
3948 (EXTRA_DIST): Define.
3949 * vmsconf.sh: Handle {targ-cpu, obj-format, atof-targ} modules
3950 explicitly rather than via the list of object files.
3951 (gcc-as.opt): New file created when make-gas.com is run.
3952 * config-gas.com: Create {targ-cpu.h, obj-format.h, targ-env.h,
3953 itbl-cpu.h} to #include appropriate file rather than copying that
3955 * config/vms-conf.h: Synchronize with current config.in.
3956 * Makefile.in: Rebuild.
3960 * config/tc-d30v.c (do_assemble): Added flag_explicitly_parallel.
3961 (parallel_ok): Relaxed parallel subinstruction dependency check.
3965 * as.h (flag_warn_suppress_instructionswap): added new flag.
3966 * tc-d10v.c (md_parse_option,md_longopts): added "--nowarnswap"
3967 command line argument.
3968 * tc-d10v.c (write_2_short): emit "Swapping instructions"
3969 warning only if flag_warn_suppress_instructionswap is false.
3973 * configure.in (i386-*-mingw32*): New target.
3974 * configure: Rebuild.
3978 * symbols.c (resolve_symbol_value): Don't set the segment if it
3979 hasn't changed, and this is OBJ_AOUT without BFD_ASSEMBLER.
3981 * config/obj-aout.h (S_IS_LOCAL): Correct typo--pass argument to
3986 as.h (unlink): Reverse 13-Feb-97 change; use of unlink vs remove
3987 depends upon HAVE_{UNLINK,REMOVE} values rather than host
3992 * config/obj-coff.h (RESOLVE_SYMBOL_REDEFINITION): Define.
3996 * config/tc-v850.c (v850_insert_operand): Display instruction when
3997 an error is encountered.
4001 * configure.in (i386-*-sco3.2v5*): Defaults to ELF now.
4002 (i386-*-sco3.2v5*coff): New target.
4003 (i386-*-sco3.2*): New target.
4004 * configure: Rebuild.
4008 * config/tc-v850.c: Tidy error message production.
4012 * config/tc-arm.c (md_apply_fix3): Add new variable newimm to hold
4013 validate_immediate return value in the right type for comparisons
4018 * listing.c (MAX_BYTES): Use listing variables not constants.
4019 (data_buffer): No longer an array, but a pointer.
4020 (calc_hex): sizeof(data_buffer) -> MAX_BYTES.
4021 (listing_listing): Allocate data_buffer.
4025 * as.c (parse_args): Add --listing-lhs-width, --listing-lhs-width2,
4026 --listing-rhs-width, --listing-cont-lines.
4027 (show_usage): Update.
4028 * listing.c (listing_lhs_width, listing_lhs_width_second): New vars.
4029 (listing_lhs_cont_lines, listing_rhs_width): New vars.
4030 (print_lines): Use the variables instead of the constants.
4031 (listing_listing): Likewise.
4032 * listing.h: Declare the new vars.
4036 * as.c (parse_args): Add --keep-locals alias for -L.
4037 Add --strip-local-absolute.
4038 (show_usage): Update.
4039 * as.h (flag_strip_local_absolute): New flag.
4040 * symbols.c (S_IS_LOCAL): Use it.
4041 * config/obj-aout.h (S_IS_LOCAL): Likewise.
4042 * config/obj-bout.h (S_IS_LOCAL): Likewise.
4043 * config/obj-coff.h (S_IS_LOCAL): Likewise.
4047 * config/tc-m32r.c: Detect if explicitly parallel instructions
4048 might have an io conflict and issue a warning message.
4052 * cgen.c (cgen_save_fixups, cgen_restore_fixups,
4053 cgen_swap_fixups): Functions to save, restore and swap the fixup
4054 chain with a backup copy.
4055 (cgen_asm_finish_insn): Returns address of constructed insn.
4059 * listing.c (file_info_struct): Remove FILE, add POS.
4060 (last_open_file_info, last_open_file): New; a one entry FILE* cache.
4061 (file_info): Don't open the file.
4062 (buffer_line): Check for the file in the last_open cache, updating
4064 (print_source): Don't reference file_info->file.
4065 (listing_listing): Likewise.
4066 (listing_print): Close the file in the cache, if any.
4070 * read.c (dwarf_file_string): New file static variable.
4071 (emit_expr): Look for constant sequence that leads up to a file
4072 name in DWARF debugging output.
4073 (stringer): Use dwarf_file_string to decide whether to accept a
4074 string as a file name.
4078 * tc-m68k.c (m68k_ip): Remove absl->reglst MRI hack.
4079 (crack_operand): Add reg->reglst MRI hack.
4080 (r_seg): Put reglst symbols in reg_section.
4081 (m68k_frob_symbol): Frob reglst symbols into absolute_section.
4085 * tc-sh.c (get_specific): Handle SGR & DBR.
4089 * tc-h8300.c (parse_reg): Take the length of the symbol into
4090 account when attempting to match a register name.
4091 * tc-h8500.c (parse_reg): Likewise.
4095 * cgen.c: Formatting changes to improve readability.
4099 * config/tc-mips.c (macro): Rework division code to avoid unfilled
4104 Based on a patch from Jim Wilson
4105 * config/tc-d30v.c (do_assemble): Remove non-ansi default case.
4106 (tc_gen_reloc): Handle cross section PC relative relocs
4111 * config/tc-mips.c (mips_ip): Don't test pinfo flags if INSN_MACRO.
4115 * cgen.c: #include setjmp.h. Clean up pass over `struct foo' usage.
4116 (expr_jmp_buf): New static local.
4117 (cgen_parse_operand): Allow use of longjmp in parsing to handle errors.
4118 (cgen_md_operand): New function.
4119 * tc-m32r.c: Clean up pass over `struct foo' usage.
4120 (md_estimate_size_before_relax): Use CGEN_INSN_MNEMONIC.
4124 * symbols.c (S_SET_SEGMENT): Don't set the segment for section syms.
4125 (S_IS_EXTERNAL, S_IS_LOCAL): Correct parenthetication.
4129 * config/tc-i386.c (i386_operand): Give an error if there are
4130 unrecognized characters after an expression.
4132 For older changes see ChangeLog-9697