3 * configure.tgt: Mark d10v as pure multi-arch.
4 * config/d10v/tm-d10v.h: Delete file.
5 * config/d10v/d10v.mt (TM_FILE): Delete.
9 * serial.h (typedef serial_t): Delete. Replace all references to
10 serial_t with `struct serial *'.
12 * nindy-share/ttyflush.c: Update.
13 * nindy-share/ttyflush.c: Update.
14 * nindy-share/Onindy.c: Update.
15 * nindy-share/nindy.c: Update.
16 * remote-rdp.c: Update.
17 * remote-sds.c: Update.
18 * remote-st.c: Update.
19 * remote-nindy.c: Update.
20 * remote-mips.c: Update.
21 * remote-e7000.c: Update.
22 * remote-os9k.c: Update.
23 * remote-nrom.c: Update.
24 * remote-es.c: Update.
25 * remote-array.c: Update.
27 * mon960-rom.c: Update.
30 * ser-e7kpc.c: Update.
31 * sparclet-rom.c: Update.
35 * sparcl-tdep.c: Update.
49 * gdbserver/remote-utils.c (remote_open): Set gdbserver as "owner"
51 (input_interrupt): Don't block on read, in case we got redundant
52 SIGIO. Don't gripe about redundant SIGIO.
53 * gdbserver/low-hppabsd.c (mywait): Use waitpid(). Enable SIGIO
54 handler while waiting.
55 * gdbserver/low-linux.c (mywait): Likewise.
56 * gdbserver/low-nbsd.c (mywait): Likewise.
57 * gdbserver/low-sparc.c (mywait): Likewise.
61 * infrun.c (print_stop_reason): Add missing uiout field
62 "reason" for SIGNAL_RECEIVED case.
66 * config/alpha/nm-linux.h (TARGET_ELF64, PSIGNAL_IN_SIGNAL_H):
67 Remove unused macro's.
69 * config/powerpc/nm-linux.h (NO_SYS_REG_H): Remove, it's no longer
74 * go32-nat.c (info_dos_cmdlist): New variable.
75 (go32_info_dos_command): New function.
76 (_initialize_go32_nat): Convert all DOS-specific commands into
77 subcommands of "info dos". Suggested by Andrew Cagney
82 * config/nm-linux.h: Fix comments.
84 * thread-db.c (enable_thread_event_reporting): Correct warning
85 message about getting thread death breakpoint.
88 * i386-tdep.c (i386_extract_return_value): "Fix" comment.
89 (i386_store_return_value): Frob FPU status and tag word to make
90 sure the return value is the only value on the FPU stack.
92 * config/tm-linux.h: Do not include <signal.h>. Instead provide
93 reasonable defaults for REALTIME_LO and REALTIME_HI if they're not
95 * config/nm-linux.h: Include <signal.h>.
96 [__SIGRTMIN] (REALTIME_LO, REALTIME_HI): Define to __SIGRTMIN and
97 (__SIGRTMAX + 1) respectively.
101 * mcore-rom.c: Include "serial.h".
102 * Makefile.in (mcore-rom.o): Depends on "serial.h".
106 * Makefile.in (remote-bug.o): Depends on serial.h.
107 * remote-bug.c: Include "serial.h".
108 * MAINTAINERS: Mark m88k target as buildable.
113 Clean up the D10V port so that GDB and the target program no
114 longer disagree on how big pointers are.
115 * findvar.c (value_from_register): Remove special case code for D10V.
116 * printcmd.c (print_frame_args): Same.
117 * valops.c (value_at, value_fetch_lazy): Same.
118 * values.c (unpack_long): Same.
119 * gdbarch.sh: Changes to effect the following:
120 * gdbarch.h (GDB_TARGET_IS_D10V, D10V_MAKE_DADDR,
121 gdbarch_d10v_make_daddr_ftype, gdbarch_d10v_make_daddr,
122 set_gdbarch_d10v_make_daddr, D10V_MAKE_IADDR,
123 gdbarch_d10v_make_iaddr_ftype, gdbarch_d10v_make_iaddr,
124 set_gdbarch_d10v_make_iaddr, D10V_DADDR_P,
125 gdbarch_d10v_daddr_p_ftype, gdbarch_d10v_daddr_p,
126 set_gdbarch_d10v_daddr_p, D10V_IADDR_P,
127 gdbarch_d10v_iaddr_p_ftype, gdbarch_d10v_iaddr_p,
128 set_gdbarch_d10v_iaddr_p, D10V_CONVERT_DADDR_TO_RAW,
129 gdbarch_d10v_convert_daddr_to_raw_ftype,
130 gdbarch_d10v_convert_daddr_to_raw,
131 set_gdbarch_d10v_convert_daddr_to_raw, D10V_CONVERT_IADDR_TO_RAW,
132 gdbarch_d10v_convert_iaddr_to_raw_ftype,
133 gdbarch_d10v_convert_iaddr_to_raw,
134 set_gdbarch_d10v_convert_iaddr_to_raw): Delete declarations.
135 * gdbarch.c: Delete the corresponding definitions.
136 (struct gdbarch): Delete members d10v_make_daddr,
137 d10v_make_iaddr, d10v_daddr_p, d10v_iaddr_p,
138 d10v_convert_daddr_to_raw, and d10v_convert_iaddr_to_raw.
139 (startup_gdbarch): Remove initializers for the above.
140 (verify_gdbarch, gdbarch_dump): Don't verify or dump them any
142 * d10v-tdep.c (d10v_register_virtual_type): Rather that
143 claiming the stack pointer and PC are 32 bits long (which they
144 aren't), say that the stack pointer is an int16_t, and the
145 program counter is a function pointer. This allows the rest
146 of GDB to make the appropriate conversions between the code
147 pointer format and real addresses.
148 (d10v_register_convertible, d10v_register_convert_to_virtual,
149 d10v_register_convert_to_raw): Delete function; no registers
150 are convertible now, so we use
151 generic_register_convertible_not instead.
152 (d10v_address_to_pointer, d10v_pointer_to_address): New gdbarch
154 (d10v_push_arguments, d10v_extract_return_value): Remove special
155 cases for code and data pointers.
156 (d10v_gdbarch_init): Set gdbarch_ptr_bit to 16, so that GDB and
157 the target agree on how large pointers are. Say that addresses
158 are 32 bits long. Register the address_to_pointer and
159 pointer_to_address conversion functions. Since no registers are
160 convertible now, register generic_register_convertible_not as the
161 gdbarch_register_convertible method instead of
162 d10v_register_convertible. Remove registrations for
163 d10v_register_convert_to_virtual,
164 d10v_register_convert_to_raw, gdbarch_d10v_make_daddr,
165 gdbarch_d10v_make_iaddr, gdbarch_d10v_daddr_p,
166 gdbarch_d10v_iaddr_p, gdbarch_d10v_convert_daddr_to_raw, and
167 gdbarch_d10v_convert_iaddr_to_raw.
169 * printcmd.c (print_scalar_formatted): If we are printing an
170 address, remember that TARGET_ADDR_BIT is not always equal to
173 * valops.c (value_cast): When casting a pointer to an integer,
174 don't convert it to an address.
178 * remote-utils.h (struct serial): Declare as opaque. Remove
179 include of "serial.h".
180 * Makefile.in (remote_utils_h): Update.
182 * monitor.h (struct serial): Declare as opaque. Remove include of
184 (struct monitor_ops): Replace serial_t with `struct serial *'.
185 * monitor.c (monitor_desc): Ditto.
189 * mips-linux-tdep.c: New file.
190 * mips-linux-nat.c: New file.
191 * config/mips/linux.mh: New file.
192 * config/mips/linux.mt: New file.
193 * config/mips/xm-linux.h: New file.
194 * config/mips/nm-linux.h: New file.
195 * config/mips/tm-linux.h: New file.
196 * configure.host: Recognize mips*-*-linux*.
197 * configure.tgt: Likewise.
198 * NEWS: Mention mips*-*-linux* port.
202 * serial.h (struct serial): Rename `struct _serial_t'.
203 * serial.c (XMALLOC): Define.
204 (serial_open): Update. Use XMALLOC.
205 (serial_fdopen): Ditto.
209 * gdbtypes.h (builtin_type_void_data_ptr): Rename
211 * gdbtypes.c (builtin_type_void_data_ptr): Update.
212 (build_gdbtypes): Update.
213 (_initialize_gdbtypes): Update.
214 * values.c (value_as_pointer): Update.
215 * utils.c (host_pointer_to_address): Update.
216 (address_to_host_pointer): Update.
220 * remote-udi.c (udi_wait): Make type, instead of name, of first
225 * ser-mac.c: Make obsolete.
226 * Makefile.in (ser-mac.o): Ditto.
230 * go32-nat.c (go32_get_windows_version, print_mem, go32_sysinfo)
231 (read_memory_region, get_descriptor, display_descriptor)
232 (go32_sldt, go32_sgdt, go32_sidt): New functions.
233 (top-level): Include ctype.h, utsname.h, dos.h, and go32.h. Ifdef
234 away `disable' from dos.h, since breakpoint.h defines an enum
235 member of the same name, and GCC 2.7.2 barfs.
236 (_initialize_go32_nat): Provide new commands dos-sysinfo, dos-ldt,
237 dos-gdt, and dos-idt, all of them in the "info" class
241 * procfs.c (create_procinfo): Allocate space for saved_entryset
243 (destroy_one_procinfo): Free space allocated to saved_entryset
248 * TODO (5.1): Update.
252 * symtab.c (main_name): New function.
253 (set_main_name): New function.
258 * dbxread.c (process_one_symbol): Handle the N_MAIN stab by
260 * blockframe.c (inside_main_func): Use main_name instead of
262 * symtab.c (find_main_psymtab): Ditto.
263 * source.c (select_source_symtab): Ditto.
264 * nlmread.c (nlm_symfile_read): Ditto.
265 * rs6000-tdep.c (skip_prologue): Ditto.
269 * TODO: Convert most items into PRs.
273 * lin-lwp.c (status_to_str): New function.
274 (lin_lwp_wait): Use it to print debug messages where appropriate.
278 * i387-tdep.c (print_i387_value): Fix pointer glitch.
282 * lin-lwp.c (count_events_callback): Fix formatting. Turn check
283 commented with "paranoia" into gdb_assert.
284 (select_event_lwp_callback): Likewise.
285 (cancel_breakpoints_callback): Bail out early if LP is the event
286 LWP. Add comment about backup up breakpoints. Fix formatting and
288 (select_event_lwp): Make solely repsonsible for switching event
289 LWP. Fix formatting and remove bogus "ERROR" debug message.
290 Don't backup breakpoints from here.
291 (lin_lwp_wait): Don't touch LP->status, let select_event_lwp
292 handle that. Only call select_event_lwp if we're not waiting for
293 a specific LWP, i.e. when PID == -1. Backup breakpoints from here.
297 * procfs.c (procfs_resume): Silence noisy warning.
301 * lin-lwp.c: Prevent thread starvation by using a monte carlo
302 method to choose which of several event threads to handle next.
304 (stop_wait_callback): Defer pushback of breakpoint events until
305 later; add SIGTRAP events to the queue of unhandled events.
306 Keep calling waitpid until SIGSTOP retrieved. If more than one
307 non-SIGSTOP event is retrieved, push them back onto the process
309 (count_events_callback, select_singlestep_lwp_callback,
310 select_event_lwp_callback, cancel_breakpoints_callback,
311 select_event_lwp): New functions. Implement monte carlo method
312 for selecting which of several SIGTRAP threads to handle next.
313 Push back the breakpoint event for all threads other than the
315 (lin_lwp_wait): Call select_event_lwp to decide which of several
316 sigtrapped lwps to handle next.
317 (resume_callback): Disable code that attempts to handle
318 step_resume breakpoints. Let core gdb handle this.
322 * gdbtypes.h (builtin_type_void_func_ptr): New builtin type.
323 * gdbtypes.c (builtin_type_void_func_ptr): Define the variable.
324 (build_gdbtypes): Initialize it.
325 (_initialize_gdbtypes): Swap it.
329 * mips-tdep.c (mips32_op): Correct offset.
330 (itype_op): Likewise.
331 (itype_rs): Fix formatting.
332 (itype_immediate): Fix formatting.
333 (jtype_op): Correct offset.
334 (jtype_target): Fix formatting.
335 (rtype_op): Correct offset.
336 (rtype_rs): Fix formatting.
337 (rtype_rt): Likewise.
338 (rtype_rd): Likewise.
339 (rtype_shamt): Likewise.
340 (rtype_funct): Likewise.
342 (mips32_next_pc): Fix formatting and comments. Recognize
343 coprocessor 1 branches. Check the correct field for BLT family
344 branches. Use itype_rt instead of itype_rs for the second register
345 of a BNE or BNEL branch. Move (unreachable) default case.
349 * ui-out.h (struct ui_out_impl): Add field is_mi_like_p.
350 (ui_out_is_mi_like_p): Declare.
351 * ui-out.c (ui_out_is_mi_like_p): Define.
352 (default_ui_out_impl): Initialize is_mi_like_p to zero.
353 * cli-out.c (cli_ui_out_impl): Ditto.
354 * breakpoint.c (print_it_typical): Use ui_out_is_mi_like_p.
355 (watchpoint_check, print_one_breakpoint, mention): Ditto.
356 * infrun.c (print_stop_reason, normal_stop): Ditto.
360 * mips-tdep.c (mips_software_single_step): New function.
361 * config/mips/tm-mips.h: Add prototype for
362 mips_software_single_step.
366 * ppc-linux-nat.c (supply_gregset): Use elf_greg_t instead
368 (fill_gregset): Likewise.
372 * objfiles.c (open_mapped_file): Use lbasename instead of
377 * d10v-tdep.c (d10v_frame_chain, d10v_frame_init_saved_regs,
378 show_regs, d10v_read_pc, d10v_write_pc, d10v_read_sp,
379 d10v_write_sp, d10v_write_fp, d10v_read_fp,
380 d10v_push_return_address): Call the functions d10v_make_daddr,
381 d10v_make_iaddr, d10v_convert_iaddr_to_raw, and
382 d10v_convert_daddr_to_raw, not the global macros D10V_MAKE_DADDR,
383 D10V_MAKE_IADDR, D10V_CONVERT_IADDR_TO_RAW, and
384 D10V_CONVERT_DADDR_TO_RAW.
386 * dwarf2read (dwarf2_build_psymtabs_hard): Doc fix.
390 * config/i386/xm-go32.h (HOST_I386): Removed.
391 * config/i386/xm-linux.h (HOST_I386): Removed.
395 * i387-tdep.c (print_i387_value): Add extra space after final full
400 * TODO (5.1): Update. Doco changes committed.
404 * config/arm/tm-arm.h: Include "floatformat.h".
408 * i387-tdep.c: Include "gdb_assert.h".
409 (print_i387_value): Use extract_floating to extract the FP value
410 from a zero padded local buffer.
414 * TODO: Delete all thread items. The thread code was overhauled.
418 * memattr.c (create_mem_region): Move n to next memory region,
419 to avoid infinite loop.
421 * memattr.h: Add copyright statement.
426 * dwarf2read.c (struct partial_die_info): New member: has_pc_info.
427 (read_partial_die): Delete fourth argument; we return this info in
428 the struct partial_die_info object itself now.
429 (dwarf2_build_psymtabs_hard, scan_partial_symbols): Use the
430 has_pc_info field of the partial die struct, rather than passing a
431 variable by reference to read_partial_die.
433 * dwarf2read.c (dwarf2_build_psymtabs_hard): Remove extraneous
434 code in loop condition.
438 * thread_db (find_new_threads_callback, thread_db_thread_alive,
439 attach_thread): Update comments.
443 * thread-db.c (attach_thread): Check for TD_THR_ZOMBIE in addition
444 to TD_THR_UNKNOWN when looking for defunct zombie threads.
445 (thread_db_thread_alive): Ditto.
446 (find_new_threads_callback): Ditto.
450 * MAINTAINERS: Add myself to the write-after-approval list.
454 * solib-svr4.c: Include "elf/mips.h".
455 (elf_locate_base): Make DT_MIPS_RLD_MAP block unconditional.
459 * dwarf2read.c (read_comp_unit, sibling_die, dump_die,
460 dump_die_list, store_in_ref_table, follow_die_ref): Make these
461 static; they're private functions.
465 * coffread.c (coff_symfile_read): Parse DWARF2 info if present.
469 * TODO: Add import of readline 4.2 as a gdb 5.2 task.
473 * config/djgpp/fnchange.lst: Sort.
477 * config/djgpp/fnchange.lst: Rename mi0-var-block.exp,
478 mi0-var-cmd.exp, mi0-var-child.exp and mi0-var-display.exp.
482 * MAINTAINERS: Add myself to the write-after-approval list.
486 * remote-array.c (SWAP_TARGET_AND_HOST): Delete macro.
487 (get_hex_word): Don't use HOST_BYTE_ORDER.
488 (array_fetch_registers): Add variable ``reg''. Use
489 store_unsigned_integer to byte-swap the register. Delete unused
494 * MAINTAINERS: Add Per Bothner to Java maintainers.
498 * rdi-share/unixcomm.c (SERIAL_PREFIX): Always provide a default.
499 * rdi-share/hostchan.h (__unix): Hack, provide a default value.
500 * rdi-share/host.h (__unix): Hack, define when __NetBSD__.
502 * MAINTAINERS: Update. arm-elf builds.
506 * d10v-tdep.c (d10v_ts2_dmap_register): Doc fix.
508 * d10v-tdep.c (d10v_frame_chain_valid, d10v_use_struct_convention,
509 d10v_breakpoint_from_pc, d10v_register_byte,
510 d10v_register_raw_size, d10v_register_virtual_size,
511 d10v_register_virtual_type, d10v_register_convertible,
512 d10v_register_convert_to_virtual, d10v_register_convert_to_raw,
513 d10v_make_daddr, d10v_make_iaddr, d10v_daddr_p, d10v_iaddr_p,
514 d10v_convert_iaddr_to_raw, d10v_convert_daddr_to_raw,
515 d10v_store_struct_return, d10v_store_return_value,
516 d10v_extract_struct_value_address, d10v_frame_saved_pc,
517 d10v_saved_pc_after_call, d10v_pop_frame, d10v_skip_prologue,
518 d10v_frame_chain, d10v_frame_init_saved_regs,
519 d10v_init_extra_frame_info, d10v_read_pc, d10v_write_pc,
520 d10v_read_sp, d10v_write_sp, d10v_write_fp, d10v_read_fp,
521 d10v_push_return_address, d10v_push_arguments,
522 d10v_extract_return_value): Make these functions static.
526 From Fernando Nasser:
527 * infrun.c (handle_inferior_event): Handle "nexti" inside function
532 * infrun.c (handle_inferior_event): Replace prev_pc test in all
533 calls to bpstat_stop_status (removed in 1999-09-24). This test
534 helps distinguish stepping over a breakpoint trap from stepping
535 thru a jump to the instruction after a breakpoint trap.
536 (handle_inferior_event): Don't bother writing the PC if
537 DECR_PC_AFTER_BREAK is zero (optimization).
538 * breakpoint.c (bpstat_stop_status): Add comment explaining the
539 purpose and usage of the "not_a_breakpoint" argument in computing
540 the breakpoint address.
545 * monitor.c (setmem_resp_delim_pattern): New regexp pattern.
546 (setreg_resp_delim_pattern): Likewise.
547 (setmem_resp_delim_fastmap): New buffer.
548 (setreg_resp_delim_fastmap): Likewise.
549 (monitor_open): Initialize above regexp if they are defined.
550 (monitor_write_memory): Use regexp to check the result of write.
551 (monitor_store_register): Likewise to check result of register set.
556 * coff-solib.c: Include symfile.h and objfiles.h to make
561 * configure.in (--enable-gdbmi): Enable by default.
562 * configure: Regenerate.
568 * solib-osf.c (osf_in_dynsym_resolve_code): Add a comment
569 explaining the consequences of always returning zero. No code
575 * defs.h (enum target_signal): Add TARGET_SIGNAL_REALTIME_65
576 to TARGET_SIGNAL_REALTIME_127.
577 * target.c (struct signals): Add SIG63 to SIG127.
578 (target_signal_from_host): Handle up to 127 signals.
579 (do_target_signal_to_host): Likewise.
583 * remote-sds.c (sds_start_remote): Change type of ``c'' to int
584 from possibly unsigned char.
588 * ser-ocd.c: Delete file.
589 * Makefile.in (ALLDEPFILES): Remove ser-ocd.c
590 (ser-ocd.o): Delete target.
596 * MAINTAINERS (Write After Approval): Sort.
597 (Past Maintainers): Daniel Berlin stepped down as C++ maintainer.
601 * breakpoint.c (breakpoint_1): Always output the breakpoint
602 headings. Leave it to ui-out to decide which
606 * stack.c (print_frame): For ui_out, output a list of arguments.
610 * MAINTAINERS (paper trail): Update.
614 * infrun.c: Eliminate the "thread_step_needed" state variable,
615 and replace it with a relatively simple test in resume.
616 (resume): Replace thread_step_needed logic with a test for
617 stepping, breakpoint_here_p and breakpoints_inserted.
618 Move CANNOT_STEP_BREAKPOINT logic to after thread_step logic.
619 (proceed): Discard thread_step_needed logic.
620 (wait_for_inferior, fetch_inferior_event, handle_inferior_event):
621 Discard thread_step_needed logic.
625 * remote-rdi.c (arm_rdi_wait): Fix return type in prototype.
626 * rdi-share/host.h: Add missing parenthesis in conditional.
630 * configure.in: include nlist.h when checking for member som_addr
632 * configure: regenerate.
636 * cli-out.c (cli_out_new): Initialize new structure member
641 * ui-out.h (ui_out_table_header): Add parameter ``col_name''.
642 (table_header_ftype): Ditto.
643 * cli-out.c (cli_table_header): Update.
644 * ui-out.c (ui_out_table_header): Update.
645 (uo_table_header): Update.
646 (default_table_header): Update.
647 (append_header_to_list): Update.
648 (struct ui_out_header): Add field ``col_name''.
649 (append_header_to_list): Use xstrdup. Initialize col_name.
650 * breakpoint.c (breakpoint_1): Pass COL_NAME to
655 * cli-out.c: Include "gdb_assert.h'.
656 (struct ui_out_data): Add field ``suppress_output.
657 (cli_table_begin): When NR_ROWS is zero, suppress_output.
658 (cli_table_end): Clear suppress_output.
659 (cli_table_body): Check suppress_output.
660 (cli_table_header, cli_begin): Ditto.
661 (cli_end, cli_field_int, cli_field_skip): Ditto.
662 (cli_field_string, cli_field_fmt, cli_spaces): Ditto.
663 (cli_text, cli_message, cli_wrap_hint): Ditto.
664 * breakpoint.c (breakpoint_1): Close the ui_out table before
665 printing the breakpoint not found message.
669 * ui-out.c (ui_out_table_begin): Add parameter ``nr_rows''.
670 (default_table_begin): Ditto.
671 (uo_table_begin): Ditto.
672 * cli-out.c (cli_table_begin): Ditto.
673 * ui-out.h (ui_out_table_begin): Update
674 (table_begin_ftype): Update.
675 * breakpoint.c (breakpoint_1): Pass nr_printable_breakpoints to
680 * breakpoint.c (breakpoint_1): Restructure. Compute the
681 nr_printable_breakpoints. Move the header output to before the
682 main print breakpoints loop.
683 (user_settable_breakpoint): New function.
687 * infrun.c, breakpoint.c: Use strncmp as the "mi" test. Allow,
688 "mi", "mi0" and "mi1".
692 * gdbarch.sh: Generate an error when conflicting macro
693 definitions. Generate an error when both pure multi-arch and
695 * gdbarch.h, gdbarch.c: Regenerate.
696 * defs.h (GDB_MULTI_ARCH_TM): Rewrite definition.
700 * config/sparc/tm-sun4sol2.h (GDB_MULTI_ARCH): Down grade to
701 GDB_MULTI_ARCH_PARTIAL from two.
706 * cli/cli-script.c (free_command_lines): Reset list pointer.
710 * arch-utils.c (init_frame_pc_default): New function
711 * arch-utils.h (init_frame_pc_default): Declare.
712 * gdbarch.sh (INIT_FRAME_PC): Default to init_frame_pc_default and
713 not init_frame_pc_noop.
714 * gdbarch.h, gdbarch.c: Re-generate.
715 * blockframe.c (INIT_FRAME_PC): Delete macro definition.
716 * mips-tdep.c (mips_gdbarch_init): Set init_frame_pc to
721 * gdbarch.c: Regenerate. Out-of-sync with gdbarch.sh.
725 * gdbarch.sh (CANNOT_FETCH_REGISTER): Multi-arch.
726 (CANNOT_STORE_REGISTER): Ditto.
727 * infptrace.c (CANNOT_FETCH_REGISTER): Delete definition.
728 (CANNOT_STORE_REGISTER): Ditto.
729 * regcache.c (CANNOT_STORE_REGISTER): Ditto.
730 * lynx-nat.c (CANNOT_STORE_REGISTER): Ditto.
731 * arch-utils.h (cannot_register_not): Define.
732 * arch-utils.c (cannot_register_not): Declare.
736 * gdbarch.sh: Clarify pre/post default
737 (INIT_FRAME_PC_FIRST, INIT_FRAME_PC): Multiarch.
738 * blockframe.c (get_prev_frame): Remove #ifdef from around
739 INIT_FRAME_PC_FIRST call.
740 * arch-utils.c (init_frame_pc_noop): Define.
741 * arch-utils.h (init_frame_pc_noop): Declare.
742 * config/mips/tm-mips.h (INIT_FRAME_PC_FIRST): Delete.
743 (INIT_FRAME_PC, mips_init_frame_pc_first): Ditto.
744 * mips-tdep.c (mips_init_frame_pc_first): Make static.
745 (mips_gdbarch_init): Initialize init_frame_pc_first.
746 (mips_dump_tdep): Update.
750 * infrun.c (context_switch): New function. Abstract the operation
751 of saving and restoring infrun's state when switching threads.
752 (handle_inferior_event): Normalize the handling of the 'thread hop'
753 event (when the wrong thread hits a thread-specific breakpoint,
754 and we need to solo-step that thread past the breakpoint).
755 Call keep_going, instead of target_resume. Handle the subsequent
756 singlestep-trap as a normal event instead of just resuming.
760 * arch-utils.c (core_addr_identity): New function. Rename
761 default_convert_from_func_ptr_addr.
762 * gdbarch.sh (CONVERT_FROM_FUNC_PTR_ADDR): Update.
763 (ADDR_BITS_REMOVE): Define. Default to core_addr_identity.
764 * defs.h (ADDR_BITS_REMOVE): Delete macro definition.
765 * config/mips/tm-mips.h (ADDR_BITS_REMOVE): Delete definition.
766 * mips-tdep.c (mips_addr_bits_remove): Make static.
767 (mips_gdbarch_init): Initialize addr_bits_remove.
772 * configure.tgt: Add S/390 31 & 64 bit target configuration.
773 * configure.host: Ditto for host.
777 * gdbarch.sh (EXTRACT_STRUCT_VALUE_ADDRESS_P): Delete definition.
778 (EXTRACT_STRUCT_VALUE_ADDRESS): Change to a function with
780 * gdbarch.h, gdbarch.c: Regenerate.
781 * values.c (value_being_returned): Change the reference to
782 EXTRACT_STRUCT_VALUE_ADDRESS_P to a function call.
786 * MAINTAINERS: Add Paul Hilfinger and Joel Brobecker to the
787 Write After Approval list.
791 * remote.c (show_remote_protocol_qSymbol_packet_cmd,
792 set_remote_protocol_qSymbol_packet_cmd): New functions.
793 (init_all_packet_configs, show_remote_cmd): Add qSymbol packet.
794 (remote_check_symbols): New function. Implement qSymbol packet,
795 allowing target to request symbol lookup service from gdb.
796 (remote_open_1, remote_async_open_1): Call remote_check_symbols,
797 allowing symbol lookup from exec_bfd on connection to target.
798 (remote_new_objfile): New function. Catch new objfile notifications
799 from shared library module, and call remote_check_symbols.
800 (_initialize_remote): Hook remote_new_objfile into the shared
801 library notification chain. Add "set remote symbol-lookup" command.
805 * tracepoint.c (trace_command): We now have tracepoint
806 events. Get rid of those ugly hooks.
807 (tracepoint_operation): Likewise.
808 (trace_pass_command): Likewise.
812 * gdbthread.h (struct thread_info): Add new fields:
813 current_line, current_symtab, step_sp, for saved infrun state.
814 * thread.c (save_infrun_state, load_infrun_state): Save and
815 restore current_line, current_symtab, and step_sp.
816 (add_thread): Rather than adding assignments to initialize
817 the new fields, just use memset (tp, 0, sizeof (*tp).
818 This way future new fields will not be overlooked.
819 * infrun.c (handle_inferior_event): Save and restore save_sp,
820 current_line, and current_symtab when switching threads.
824 * MAINTAINERS: Add Andrew Cagney as co-maintainer of
829 * symtab.c (lookup_symtab_1): Replace basename with lbasename.
830 (lookup_partial_symtab, file_matches): Ditto.
831 (make_source_files_completion_list): Ditto.
832 (make_file_symbol_completion_list): Ditto. Make local char*
833 variable ``tail'' constant.
834 (make_source_files_completion_list): Ditto with ``base_name''.
835 * source.c (open_source_file): Use lbasename. Make ``p'' const
840 * config/i386/xm-go32.h (SLASH_P, ROOTED_P, SLASH_CHAR)
841 (SLASH_STRING): Remove unised definitions.
842 * config/i386/xm-cygwin.h: Likewise.
846 * ui-out.c (ui_out_list_begin): Add parameter ``id''.
847 (make_cleanup_ui_out_list_begin_end): Ditto. Open the list.
848 * ui-out.h: Update declarations.
852 * source.c (openp): Make parameters ``path'' and ``string''
854 (openp): Use alloca to safely duplicate ``string''. Make local
855 variables ``p'' and ``p1'' constant. Delete char* casts.
858 * symtab.c (lookup_symtab_1): Make parameter ``name'' constant.
859 (lookup_symtab, lookup_partial_symtab): Ditto.
860 * symtab.h (lookup_symtab, lookup_partial_symtab): Update.
864 * ui-out.h (ui_out_table_begin): Make char* parameters constant.
865 (ui_out_table_header, ui_out_field_int): Ditto.
866 (ui_out_field_core_addr, ui_out_field_string): Ditto.
867 (ui_out_field_stream, ui_out_field_fmt): Ditto.
868 (ui_out_field_skip, ui_out_text, ui_out_message): Ditto.
869 * ui-out.c (ui_out_table_begin, ui_out_table_header): Update.
870 (ui_out_field_core_addr, ui_out_field_stream): Update.
871 (ui_out_field_string, ui_out_field_fmt): Update.
872 (ui_out_text, ui_out_message): Update.
873 (append_header_to_list): Make char* parameters constant.
874 (uo_table_header, uo_table_begin): Ditto.
875 (uo_field_int, uo_field_skip): Ditto.
876 (uo_field_string, uo_field_fmt): Ditto.
877 (uo_text, uo_message): Ditto.
881 * completer.c (gdb_completer_loc_break_characters): New variable.
882 (line_completion_function): If we are completing on locations,
883 back up the start of word pointer past all characters which can
884 appear in a location spec.
885 (location_completer): New function.
887 * completer.h: Add prototype for location_completer.
889 * symtab.c (make_source_files_completion_list)
890 (add_filename_to_list, not_interesting_fname): New functions.
891 (filename_seen): New function, body extracted from
892 output_source_filename.
893 (output_source_filename): Call filename_seen to check if the file
895 (make_symbol_completion_list): If TEXT includes a
896 double-quoted string, return an empty list, not NULL.
897 (make_file_symbol_completion_list): New function, similar to
898 make_symbol_completion_list but with an additional argument
901 * symtab.h (make_file_symbol_completion_list)
902 (make_source_files_completion_list): Add prototypes.
904 * breakpoint.c (_initialize_breakpoint): Make location_completer
905 be the completion function for all commands which set breakpoints
907 (top-level): #include "completer.h".
909 * tracepoint.c (_initialize_tracepoint): Make location_completer
910 be the completion function for the "trace" command.
911 (top-level): #include "completer.h".
913 * printcmd.c (_initialize_printcmd): Make location_completer be
914 the completion function for the "print", "inspect", "call", and
915 "disassemble" commands.
916 (top-level): #include "completer.h".
918 * infcmd.c (_initialize_infcmd): Make location_completer be the
919 completion function for the "go", "jump", and "until" commands.
920 (top-level): #include "completer.h".
924 * gnu-regex.c: Eliminate obsolete check for _MSC_VER.
925 * utils.c (notice_quit): Remove dummy function only used for _MSC_VER.
926 * values.c (unpack_double): Remove obsolete check for _MSC_VER.
930 * ser-e7kpc.c: Ditto. Define WIN32_LEAN_AND_MEAN under _WIN32, for
932 (get_ds_base): Remove _MSC_VER version of this function.
933 * nindy-share/ttyflush.c: Ditto.
934 * rdi-share/host.h: Ditto.
935 * ser-go32.c (dos_readchar): Remove call to obsolete function.
936 * remote-sim.c (gdb_os_poll_quit): Ditto.
937 * remote-e7000.c (expect): Remove obsolete #if 0'ed code.
939 * main.c (captured_main): Eliminate special Cygwin checks.
940 * ser-tcp.c: Remove unneeded __CYGWIN__ guard against system include.
944 * Makefile.in (gdbcmd_h): Add ui_out_h.
945 (breakpoint.o, infcmd.o, main.o, printcmd.o, stack.o): Ditto.
946 (thread.o, top.o): Ditto.
948 * ui-out.h (table_begin_ftype): Make string parameters constant.
949 (table_header_ftype): Ditto.
950 (field_int_ftype): Ditto.
951 (field_skip_ftype): Ditto.
952 (field_string_ftype): Ditto.
953 (field_fmt_ftype): Ditto.
955 (message_ftype): Ditto.
956 * cli-out.c (cli_table_begin): Ditto.
957 (cli_table_header): Ditto.
958 (cli_field_int): Ditto.
959 (cli_field_skip): Ditto.
960 (cli_field_string): Ditto.
961 (cli_field_fmt): Ditto.
963 (cli_message): Ditto.
964 (out_field_fmt): Ditto.
965 * ui-out.c (default_table_begin): Ditto.
966 (default_table_header): Ditto.
967 (default_field_int): Ditto.
968 (default_field_skip): Ditto.
969 (default_field_string): Ditto.
970 (default_field_fmt): Ditto.
971 (default_text): Ditto.
972 (default_message): Ditto.
976 * breakpoint.c (delete_breakpoint): Pass mark_inserted to
977 remove_breakpoint, so that the subsequent test for
978 bpt->inserted will succeed, and duplicates will be fixed up.
982 * dwarf2read.c (set_cu_language): Handle DW_LANG_Java.
986 * tracepoint.c (tracepoint_opertation): Add ui event
988 (trace_pass_command): Ditto.
992 * MAINTAINERS (Write After Approval): Note the entry criteria.
993 (HP/PA): Jeff Law stepped down
997 * gdbarch.sh: Make sure that '[' doesn't interpret interesting
998 variable values as operators.
1002 * gdb-events.sh: Fix quote escaping which was obsoleted
1007 * gdb-events.sh: Make if statements and tests
1008 a little more portable.
1009 Don't use shell's echo command to put strings containing
1010 escaped characeters into a file -- different flavors of /bin/sh
1011 require differnt levels of escaping. Use cat <<EOF instead.
1012 Our internal field separator is a colon. Change all
1013 commands which assume it is a space.
1017 * lin-lwp.c (struct lwp_info): Add member `resumed'.
1018 (iterate_over_lwps): Make sure we can handle CALLBACK deleting the
1019 LWP it's called for.
1020 (lin_lwp_attach): Mark LWP as resumed to make sure the fake
1021 SIGSTOP is reported.
1022 (resume_clear_callback): New function.
1023 (resume_set_callback): New function.
1024 (lin_lwp_resume): Mark all LWP's that we're going to resume as
1025 resumed, and unmark all others.
1026 (status_callback): Only report a pending wait status if we pretend
1027 that LP has been resumed.
1028 (resumed_callback): New function.
1029 (lin_lwp_wait): Add assertions to check that LWP's are properly
1030 marked as resumed. Partially revert 2001-05-25 patch by Michael
1031 Snyder: do not resume all threads. Add comment explaining the
1032 problems associated with this bit of code.
1036 * MAINTAINTERS: Syd Polk is stepping down from
1037 maintaining libgui. I am replacing him.
1041 * config/mips/tm-irix6.h: New file.
1043 * config/mips/irix6.mh: New file.
1045 * config/mips/irix6.mt: New file.
1047 * config/mips/xm-irix6.h: New file.
1049 * config/mips/nm-irix6.h: New file.
1051 * mips-tdep.c (mips_gdbarch_init) <MIPS_ABI_N32>: Set up the
1052 disassembler info in tm_print_insn_info as appropriate for the N32
1053 ABI. Force N32 ABI to be the default if the CPU is R8000 or
1056 * configure.tgt (mips*-sgi-irix6*): Map to irix6.
1058 * configure.host (mips*-sgi-irix6*): Ditto.
1062 * gnu-v3-abi.c: Include "gdb_assert.h".
1063 (build_gdb_vtable_type): Replace abort() with gdb_assert().
1067 * cp-abi.h: Rearrange code to put documentation comments above the
1068 functions we export. The actual function table itself simply
1069 refers to those functions. Minor doc fixes.
1071 * gdbarch.sh: Changes to effect the following:
1072 * gdbarch.c (initialize_non_multiarch): New function.
1073 * gdbarch.h (initialize_non_multiarch): New declaration.
1074 * arch-utils.c (initialize_current_architecture): For
1075 non-multiarch configurations, call initialize_non_multiarch.
1079 * symfile.c (compare_psymbols): Replace PTR with void*. Delete
1081 (compare_symbols): Ditto.
1085 * arch-utils.c (generic_prepare_to_proceed): Allow for having
1086 stopped due to a Ctrl-C as well as breakpoints.
1088 * hppa-tdep.c (hppa_prepare_to_proceed): Add FIXME as this may not
1089 support thread switches after Ctrl-C.
1090 * lin-lwp.c (lin_lwp_prepare_to_proceed): Ditto.
1091 * linux-thread.c (linuxthreads_prepare_to_proceed): Ditto.
1092 * m3-nat.c (mach3_prepare_to_proceed): Ditto.
1096 * gdbarch.sh, gdbarch.c: Revert change of 2001-06-01; all
1097 per-architecture data should be registered at initialization time,
1098 before any gdbarch objects get used, so the generality is
1103 * gdb-events.sh (function_list): Add tracepoint_create,
1104 tracepoint_delete, and tracepoint_modify events.
1105 * gdb-events.c: Regenerated.
1106 * gdb-events.h: Regenerated.
1110 * gdb-events.sh: Update copyrights.
1111 Change free to xfree.
1112 * gdb-events.c: Regenerated.
1113 * gdb-events.h: Regenerated.
1117 * source.c (mod_path, openp): Use #ifdef HAVE_DOS_BASED_FILE_SYSTEM
1118 instead of #if HAVE_DOS_BASED_FILE_SYSTEM.
1119 * completer.c: Ditto.
1120 * cli/cli-cmds.c (cd_command): Ditto.
1124 * mips-tdep.c (show_mipsfpu_command): Remove unused variable msg.
1125 (mips_set_processor_type_command): Remove unused variable j.
1126 (mips_breakpoint_from_pc): Declare breakpoint instruction
1127 sequences as unsigned char, to avoid compiler warnings.
1129 * source.c (mod_path, openp): Use HAVE_DOS_BASED_FILE_SYSTEM
1130 instead of system-specific define's like _WIN32 and __MSDOS__.
1131 Use IS_DIR_SEPARATOR and IS_ABSOLUTE_PATH instead of SLASH_P and
1133 (top-level): #include "filenames.h".
1135 * solib.c (solib_open): Use IS_DIR_SEPARATOR and IS_ABSOLUTE_PATH
1136 instead of SLASH_CHAR, ROOTED_P and SLASH_P.
1137 (top-level): #include "filenames.h".
1139 * defs.h (SLASH_P, SLASH_CHAR, ROOTED_P): Remove definitions.
1140 (SLASH_STRING): Define only for _WIN32.
1142 * completer.c: Use HAVE_DOS_BASED_FILE_SYSTEM instead of
1145 * cli/cli-cmds.c (cd_command): Use IS_DIR_SEPARATOR and
1146 IS_ABSOLUTE_PATH instead of SLASH_P and ROOTED_P. Replace
1147 system-specific ifdefs with HAVE_DOS_BASED_FILE_SYSTEM.
1148 (top-level): #include "filenames.h".
1150 * go32-nat.c (go32_wait): Change the return value to ptid_t.
1152 * config/djgpp/fnchange.lst: Add two new files in the
1153 gdb/testsuite/gdb.c++/ directory to the remapped names.
1155 * config/djgpp/djconfig.sh (lt_cv_sys_max_cmd_len): Set to 12KB.
1159 Expand the gdbarch per-architecture data vector as needed, rather
1160 than requiring that all per-architecture data be registered before
1161 the first gdbarch object is allocated.
1162 * gdbarch.sh: Changes to effect the following:
1163 * gdbarch.c (alloc_gdbarch_data, init_gdbarch_data): Delete
1164 declarations and definitions.
1165 (check_gdbarch_data): New function, and declaration.
1166 (gdbarch_alloc): Don't call alloc_gdbarch_data; leaving the fields
1167 zero is good enough.
1168 (free_gdbarch_data): Tolerate a null data pointer. Free only
1169 those data items gdbarch->data actually has allocated.
1170 (set_gdbarch_data, gdbarch_data): Call check_gdbarch_data.
1171 (gdbarch_update_p): No need to call init_gdbarch_data.
1175 * ia64-tdep.c (is_float_or_hfa_type_recurse): Call check_typedef()
1176 on types that we wish to recurse on.
1177 (slot_alignment_is_next_even): New function.
1178 (ia64_push_arguments): Call slot_alignment_is_next_even() to
1179 examine the type in order to decide if it's necessary to skip
1184 * thread.c (delete_step_resume_breakpoint): New function.
1185 Maintain internal consistency of the thread list while deleting
1186 a step_resume_breakpoint.
1187 * gdbthread.h (delete_step_resume_breakpoint): Export.
1188 * breakpoint.c (bpstat_find_step_resume_breakpoint):
1189 Make thread-aware: don't return a step_resume_breakpoint
1190 for the wrong thread.
1191 * infrun.c (wait_for_inferior): Call delete_step_resume_breakpoint
1192 instead of delete_breakpoint_current_contents.
1193 (fetch_inferior_event): Ditto.
1194 (handle_inferior_event): Call delete_step_resume_breakpoint
1195 instead of delete_breakpoint.
1196 * infrun.c (handle_inferior_event): After singlestepping over a
1197 thread-specific breakpoint, use currently_stepping() to decide
1198 whether to step or continue.
1202 * gnu-v3-abi.c (gnu_v3_abi_ops, vtable_type_gdbarch_data): Make
1203 these static --- there's no reason other files should use these.
1205 * partial-stab.h (case N_FUN: case 'f':, case N_FUN: case 'F':)
1208 * partial-stab.h: New complaint: function_outside_compilation_unit.
1209 (case N_FUN: case 'f':, case N_FUN: case 'F':): If pst is zero,
1210 complain, and don't try to set pst's start address.
1214 * ia64-linux-tdep.c (IA64_LINUX_SIGCONTEXT_OFFSET): Revise to
1215 match the location at which the kernel is placing the sigcontext
1218 * ia64-tdep.c (max_skip_non_prologue_insns): New static global.
1219 (refine_prologue_limit): New function.
1220 (examine_prologue): Further limit number of instructions
1221 scanned by calling refine_prologue_limit(). Revise way in
1222 which the end of prologue address is computed for frameless
1227 * partial-stab.h: Revert previous patch.
1231 * partial-stab.h: Consistently guard against pst being NULL.
1235 * symfile.c (compare_psymbols, compare_symbols): Declare using
1236 PTR, as in the definition.
1237 * minsyms.c (compare_minimal_symbols): Likewise.
1238 * coffread.c (find_targ_sec): Likewise.
1239 * elfread.c (free_elfinfo, elf_locate_sections): Likewise.
1240 * mipsread.c (alphacoff_locate_sections): Likewise.
1241 * mdebugread.c (compare_blocks): Likewise.
1245 * solib.c (update_solib_list): Move target_resize_to_sections()
1246 into solib_map_sections() loop.
1247 (info_sharedlibrary_command): Try bfd_arch_bits_per_address() if
1248 bfd_get_arch_size() fails.
1252 * Makefile.in (osfsolib.c, osfsolib.o): Rename to solib-osf.c and
1254 * config/alpha/alpha-osf1.mh (NATDEPFILES): Replace osfsolib.o
1255 with solib-osf.o and solib.o.
1256 * config/alpha/alpha-osf2.mh: Likewise.
1257 * config/alpha/alpha-osf3.mh: Likewise.
1258 * solib-osf.c: New file, renamed and largely rewritten from
1263 * lin-lwp.c (lin_lwp_attach_lwp): Call stop_wait_callback,
1264 to consume the SIGSTOP generated by PTRACE_ATTACH.
1265 (stop_wait_callback): If a SIGTRAP or a SIGINT event is consumed,
1266 try again to get the SIGSTOP event.
1267 (lin_lwp_wait): Resume all threads when ignoring a signal.
1268 This will insure that newly attached threads get resumed.
1269 * lin-lwp.c (stop_wait_callback): Discard redundant SIGINT events.
1270 * remote.c (remote_write_bytes): Update 'p' packet pointer.
1274 * gnu-v2-abi.c (gnuv2_virtual_fn_field): There's no need to clear
1275 VALUE_POINTED_TO_OFFSET here; if value_cast doesn't return a
1276 useful value, then we should fix that instead.
1280 * solist.h (struct so_list): Document the requirement that
1281 current_sos initialize some fields to 0.
1285 * gnu-nat.c: Include <ctype.h>.
1286 (gnu_pid_to_exec_file): Add PID parameter.
1287 (set_sig_thread_cmd): Use PIDGET on return value from
1289 (proc_string): Use MERGEPID to construct argument to
1294 * breakpoint.c (breakpoint_address_is_meaningful): New function.
1295 (check_duplicates): Don't compare non-meaningful addresses.
1299 * thread-db.c: Allow for defunct zombie threads.
1300 (attach_thread): Do not attempt to attach zombie thread.
1301 (thread_db_thread_alive): Return false for defunct zombie thread.
1302 (find_new_threads_callback): Don't add defunct zombie thread to list.
1306 Add support for the GNU V3 C++ ABI.
1307 (Includes changes by Dan Berlin.)
1309 * gnu-v3-abi.c: New file.
1310 * minsyms.c: #include "value.h" and "cp-abi.h".
1311 (install_minimal_symbols): Check the minimal symbol table for
1312 symbols that look mangled in the V3 style, and select the V3 ABI
1314 * Makefile.in (SFILES): Add gnu-v3-abi.c.
1315 (COMMON_OBS): Add gnu-v3-abi.o.
1316 (gnu-v3-abi.o): Add new rule.
1317 (minsyms.o): Depend on $(cp_abi_h) and $(value_h).
1321 * values.c (value_primitive_field): If we're extracting a base
1322 class, then the type of the result should be the base class being
1323 extracted, not the type of which it is a base class.
1325 * value.h (struct value): Doc fix, and rearrange members to place
1326 them near their explanations.
1330 * remote.c (remote_async_wait): Added new variable fieldsize.
1331 Add fieldsize (return value of hex2bin) to string pointer p.
1335 * m68hc11-tdep.c (m68hc11_pop_frame): Fix stack pointer computation.
1336 (m68hc11_analyze_instruction): Update the pc correctly.
1337 (m68hc11_guess_from_prologue): Take into account the stack correction
1338 for the saving address.
1342 Changes by Jim Ingham:
1344 * values.c (value_change_enclosing_type): New function. If the
1345 new enclosing type is larger than the old one, we need to allocate
1347 * value.h: Add value_change_enclosing_type prototype.
1348 * valops.c (value_cast): Use it.
1349 (value_assign): Use it.
1350 (value_addr): Use it.
1351 (value_ind): Use it.
1352 (value_full_object): Use it.
1356 * values.c (value_static_field): Handle static fields that have a
1361 * blockframe.c (create_new_frame): Zero all the fields via memset,
1362 rather than zeroing them one by one.
1366 * top.c (user_args): Remove unused declaration.
1370 * infcmd.c (do_registers_info): Move alloca outside of loop.
1374 * remote.c (remote_wait): Added new variable fieldsize.
1375 Add fieldsize (return value of hex2bin) to string pointer p.
1379 * sparc-tdep.c (sparc_gdbarch_init): Get the architecture from
1384 * lin-lwp.c (detach_callback, lin_lwp_wait, lin_lwp_pid_to_str):
1385 Adjust format strings for printing LWPs to account for the fact
1386 that the type returned by GET_LWP() is now a long instead of an
1391 * inferior.h (null_ptid, minus_one_ptid): New variable declarations.
1392 (ptid_build, pid_to_ptid, ptid_get_pid, ptid_get_lwp)
1393 (ptid_get_tid, ptid_equal): New function declarations.
1394 * infrun.c (null_ptid, minus_one_ptid): New variables.
1395 (ptid_build, pid_to_ptid, ptid_get_pid, ptid_get_lwp)
1396 (ptid_get_tid, ptid_equal): New functions.
1397 (_initialize_infrun): Initialize null_ptid, minus_one_ptid,
1398 inferior_ptid, and target_last_wait_ptid.
1400 * defs.h (ptid_t): Redefine to be a struct rather than an int.
1401 (pid_to_ptid, null_ptid, ptid_equal): Delete these macros.
1402 (PIDGET, TIDGET, MERGEPID): Redefine these macros using the
1403 new ptid accessors and constructor.
1405 * config/i386/tm-i386v42mp.h (PIDGET, TIDGET, LIDGET, MERGEPID,
1406 MKLID, MKTID, ISTID): Provide new definitions for these macros.
1407 The old macros are retained, but disabled via #if 0 in order
1408 to aid in future restructuring. See FIXME.
1410 * arm-linux-nat.c (PIDGET, TIDGET): Delete macro definitions.
1411 * i386-linux-nat.c (PIDGET, TIDGET): Likewise.
1412 * infptrace.c (PIDGET, TIDGET): Likewise.
1413 * lin-lwp.c (PIDGET0, PIDGET, TIDGET, MERGEPID): Likewise.
1414 * lin-thread.c (PIDGET0, PIDGET, TIDGET, MERGEPID): Likewise.
1415 * proc-service.c (MERGEPID): Likewise.
1416 * procfs.c (PIDGET, TIDGET, MERGEPID): Likewise.
1417 * thread-db.c (PIDGET0, PIDGET, TIDGET, MERGEPID): Likewise.
1418 * config/nm-linux.h (PIDGET0, PIDGET, TIDGET, MERGEPID): Likewise.
1419 * config/i386/tm-i386sol2.h (PIDGET0, PIDGET, TIDGET, MERGEPID):
1421 * config/sparc/tm-sun4sol2.h (PIDGET0, PIDGET, TIDGET, MERGEPID):
1424 * lin-lwp.c (THREAD_FLAG): Delete macro definition.
1425 (GET_LWP): Redefine in terms of ptid_get_lwp().
1426 (GET_PID): Redefine in terms of ptid_get_pid().
1427 (is_lwp): Redefine without the need for THREAD_FLAG.
1428 (BUILD_LWP): Redefine in terms of ptid_build().
1429 * lin-thread.c (THREAD_FLAG): Delete macro definition.
1430 (GET_LWP): Redefine in terms of ptid_get_lwp().
1431 (GET_PID): Redefine in terms of ptid_get_pid().
1432 (GET_THREAD): Redefine in terms of ptid_get_tid().
1433 (BUILD_THREAD, BUILD_LWP): Redefine in terms of ptid_build().
1434 (is_lwp, is_thread): Redefine.
1435 (linux_child_wait, check_all_signal_numbers)
1436 (linuxthreads_discard_global_state, attach_thread): Declare these
1437 functions to squash warnings about missing declarations.
1438 * sol-thread.c (THREAD_FLAG): Delete macro definition.
1439 (GET_PID): Redefine in terms of ptid_get_pid().
1440 (GET_LWP): Redefine in terms of ptid_get_lwp().
1441 (GET_THREAD): Redefine in terms of ptid_get_tid().
1442 (BUILD_THREAD, BUILD_LWP): Redefine in terms of ptid_build().
1443 (is_lwp, is_thread): Redefine.
1444 * thread-db.c (THREAD_FLAG): Delete macro definition.
1445 (GET_PID): Redefine in terms of ptid_get_pid().
1446 (GET_LWP): Redefine in terms of ptid_get_lwp().
1447 (GET_THREAD): Redefine in terms of ptid_get_tid().
1448 (BUILD_THREAD, BUILD_LWP): Redefine in terms of ptid_build().
1449 (is_lwp, is_thread): Redefine.
1451 * corelow.c (add_to_thread_list, get_core_register_section):
1452 Eliminate hacks needed to prevent regressions when inferior_ptid
1453 wasn't wide enough to hold the core file thread id in the pid
1454 component of inferior_ptid.
1458 * remote.c (hex2bin): Make first argument const.
1459 Require explicit count, don't accept null-terminated str.
1460 (remote_resume, remote_async_resume): White space fix-up.
1461 (remote_write_bytes): Set nr_bytes to return value of bin2hex.
1465 * symtab.c (lookup_symtab_1): Use lbasename (NAME) instead of
1466 basename (NAME). The FreeBSD basename returns a pointer to a
1467 static buffer, even if it's simply returning a string identical to
1469 (lookup_partial_symtab): Likewise.
1473 * solib.c, solib.h: Add comment for function no_shared_libraries.
1477 * solib.h (no_shared_libraries): Make declaration match definition
1482 * remote.c (remote_write_bytes): Set nr_bytes before returning it.
1483 * solib.h (no_shared_libraries): Declare.
1487 * gdbarch.sh (struct gdbarch_info): Delete field bfd_architecture.
1488 (gdbarch_update_p): Rewrite logic filling in INFO struct. Use
1489 user specified values when available.
1490 * rs6000-tdep.c (rs6000_gdbarch_init): Update. Get the
1491 architecture from info.bfd_arch_info.
1492 * gdbarch.c, gdbarch.h: Regenerate.
1496 * remote-e7000.c (e7000_open): Check for bad baud rate.
1497 * remote-st.c (st2000_open): Ditto.
1501 * thread.c (do_captured_list_thread_ids): Use ui_out_tuple_begin
1502 and ui_out_tuple_end instead of ui_out_list_begin and
1505 * Makefile.in (gnu-v2-abi.o): Add $(demangle_h) to list of
1506 dependencies. Reorder dependencies to match #includes in file,
1507 for easier verification.
1511 * breakpoint.c: Replace ui_out_list_begin, ui_out_list_end and
1512 make_cleanup_ui_out_list_end with ui_out_tuple_begin,
1513 ui_out_tuple_end and make_cleanup_ui_out_tuple_begin_end.
1514 * cli/cli-setshow.c: Ditto.
1515 * printcmd.c: Ditto.
1518 * ui-out.h (enum ui_out_type): Fix tipo - tupple -> tuple.
1519 * ui-out.c (ui_out_list_begin): Delete ``lstid'' parameter.
1520 (ui_out_tuple_begin): New function.
1521 (ui_out_tuple_end): New function.
1522 (ui_out_tuple_begin_end): New function.
1523 (make_cleanup_ui_out_list_begin_end): Replace
1524 make_cleanup_ui_out_list_end function.
1525 * ui-out.h (ui_out_list_begin): Update declaration.
1526 (make_cleanup_ui_out_list_begin_end): Replace
1527 make_cleanup_ui_out_list_end declaration.
1528 (ui_out_tuple_begin, ui_out_tuple_end): Declare.
1529 (ui_out_tuple_begin_end): Declare.
1533 * gnu-v2-abi.c: Don't #include "gdb_regex.h". We don't use it.
1538 * config/pa/tm-hppa.h: Remove trigraph.
1539 * hp-symtab-read.c (hpread_type_translate): Provide return value.
1540 (hpread_read_struct_type): Remove trigraph. Add parameter in
1542 (hpread_read_array_type): Provide return value.
1543 (hpread_type_lookup): Avoid ambiguous `else'. Provide return
1545 * hppa-tdep.c (initialize_hp_cxx_exception_support): Remove
1550 * mips-tdep.c (mips_store_return_value,
1551 mips_extract_return_value): Pass arguments to
1552 return_value_location in the proper order.
1556 * Makefile.in (VERSION): Delete. Moved to file ``version.in''.
1557 (version.c): Depends on file ``version.in''. Extract version
1558 number from ``version.in'' file.
1559 (clean mostlyclean): Update.
1560 * version.in: New file.
1565 * breakpoint.c (set_raw_breakpoint): Add new parameter
1566 representing the breakpoint's type. Adjust all callers.
1567 (create_longjmp_breakpoint, create_temp_exception_breakpoint)
1568 (create_thread_event_breakpoint): Don't test for zero return
1569 value from set_raw_breakpoint(). It can never be zero.
1570 (create_exception_catchpoint, watch_command_1): Move logic
1571 which calculates the breakpoint type prior to the call to
1572 set_raw_breakpoint().
1576 * ser-unix.c (rate_to_code): Issue warning if baud rate is invalid.
1577 (hardwire_setbaudrate): Set errno to EINVAL and return with error
1578 if the conversion of the baud rate to code fails.
1582 * ui-out.h (make_cleanup_ui_out_begin_end): Declare.
1583 * ui-out.c (struct ui_out_end_cleanup_data): Define.
1584 (do_cleanup_end): New function. Replace do_list_end.
1585 (make_cleanup_ui_out_end): New function.
1586 (make_cleanup_ui_out_begin_end): New function.
1587 (make_cleanup_ui_out_list_end): Use make_cleanup_ui_out_end.
1591 * MAINTAINERS: Declare xcoffread.c open to all maintainers,
1596 * proc-api.c (ioctl_with_trace): Fix uninitialized variable.
1600 * MAINTAINERS: Add testsuite subdirectory co-maintainers.
1604 * Makefile.in (mi-main.o): Compile with -Werror.
1608 * remote.c (remote_open_1): Call no_shared_libraries, so that
1609 symbols for shared libraries can be reloaded per session.
1610 (remote_async_open_1): Ditto.
1611 * remote.c (bin2hex, hex2bin): New functions. Factor out these
1612 two conversions which are coded for repeatedly in this module.
1613 (remote_threads_extra_info, remote_wait, remote_async_wait,
1614 store_register_using_P, remote_store_registers, remote_write_bytes,
1615 remote_read_bytes, remote_rcmd): Use bin2hex and hex2bin instead
1616 of coding the conversions inline.
1617 (fromhex): Not exported, change from extern to static.
1621 * arch-utils.c (initialize_current_architecture): Delete obsolete
1622 ``info architecture'' command.
1623 (info_architecture): Delete function.
1627 * TODO (5.1, 5.2): Update.
1631 * MAINTAINERS: Jim Ingham is no longer maintaining Arm related
1636 * Makefile.in (SUBDIR_GDBTK_OBS): Add gdbtk-bp.o, gdbtk-register.o
1638 (SUBDIR_GDBTK_SRCS): Ditto for the sources.
1639 (gdbtk-bp.o): New rule.
1640 (gdbtk-register.o): New rule.
1641 (gdbtk-stack.o): New rule.
1642 (gdbtk-cmds.o): Update dependencies.
1644 (gdbtk-hooks.o): Ditto.
1645 (gdbtk-varobj.o): Ditto.
1649 * varobj.c (c_number_of_children): Fix memory leak. Delete unwanted old
1650 variables, not just unregister them.
1654 * varobj.c (c_number_of_children): Check for target type of void*,
1655 not the target type name. Allow dereferencing char*.
1659 * symfile.c (symbol_file_add_main_1): New static function.
1660 Passes the flags arguments to symbol_file_add() and takes care
1661 of any necessary reinitializations.
1662 (symbol_file_command): Call symbol_file_add_main_1() instead of
1664 (symbol_file_add_main): Ditto.
1668 * lin-lwp.c (lin_lwp_pid_to_str): Revert inadvertent format
1669 string change in 2001-05-03 changes.
1670 (lin_lwp_wait): Revert GET_LWP coercion introduced in 2001-05-03
1675 * lin-lwp.c (lin_lwp_attach): Use PIDGET() to fetch the pid
1676 component from inferior_ptid.
1677 (lin_lwp_detach): Use pid_to_ptid() to convert from a pid to a
1682 * sh3-rom.c (_initialize_sh3_rom): Get rid of specific _WINDOWS
1683 conditional for help with connections through parallel ports,
1684 given that the actual code for downloading through a parallel port
1685 is not conditionalized.
1687 * sh-tdep.c: Remove WIN32_WCE conditional. The wince sh target is
1688 unmaintaned, and probably on its way to obsolescence.
1692 * i386-tdep.c (i386_frame_saved_pc): New function.
1693 * config/i386/tm-i386.h (FRAME_SAVED_PC): Redefine in terms of
1694 i386_frame_saved_pc.
1695 (i386_frame_saved_pc): New prototype.
1697 * i386-tdep.c (i386_register_virtual_type): New function.
1698 (i386_register_convertible): New function.
1699 * config/i386/tm-i386.h (REGISTER_VIRTUAL_TYPE): Redefine in terms
1700 of i386_register_virtual_type.
1701 (REGISTER_CONVERTIBLE): Redefine in terms of
1702 i386_register_convertible.
1703 (i386_register_virtual_type, i386_register_convertible): New
1708 * Makefile.in (mn10300-tdep.o): New rule.
1710 * Makefile.in (gdb_string_h): Define. Use it throughout.
1711 Some rules were already using this, even though it isn't defined.
1713 * Makefile.in (obstack_h, target_h): Define; these are already
1714 used elsewhere, but have been expanding to the empty string.
1715 (memattr_h): Define; needed by target_h.
1717 * mn10300-tdep.c (mn10300_extract_return_value): Mark this as
1718 static. (This was accidentally omitted from the earlier patch.)
1720 * mn10300-tdep.c (mn10300_dwarf2_reg_to_regnum): New function.
1721 (mn10300_gdbarch_init): Register it as the architecture's
1722 dwarf2_reg_to_regnum method.
1724 Correct and expand handling of `movm' instruction, and register
1726 * config/mn10300/tm-mn10300.h (D0_REGNUM, A0_REGNUM, MDRQ_REGNUM,
1727 MCRH_REGNUM, MCRL_REGNUM, MCVF_REGNUM): New definitions.
1728 (enum movm_register_bits): New enum.
1729 * mn10300-tdep.c (set_movm_offsets): Use symbolic names for the
1730 bits, not hex literals. Handle the `other', `exreg0', and
1731 `exother' bits. Correct handling of `exreg1': it saves r4, r5,
1732 r6, and r7, not r2, r3, r4, and r5.
1733 (saved_regs_size): New function.
1734 (mn10300_frame_chain, mn10300_frame_saved_pc): Use it, instead
1735 of computing the same thing inline, incorrectly.
1737 * mn10300-tdep.c (mn10300_gdbarch_init): We do have a
1738 dummy_breakpoint_offset; it's zero.
1740 * mn10300-tdep.c (mn10300_pop_frame): Split the mn10300-specific
1741 stuff out into mn10300_pop_frame_regular, and use
1742 generic_pop_current_frame. This lets us share code, and also
1743 makes this function's prototype match that expected by gdbarch.
1744 Make this function static.
1745 (mn10300_pop_frame_regular): New function.
1746 (mn10300_gdbarch_init): Register mn10300_pop_frame as the
1747 gdbarch's pop_frame method.
1748 * config/mn10300/tm-mn10300.h (POP_FRAME): Delete definition.
1749 (mn10300_pop_frame): Delete declaration.
1751 * mn10300-tdep.c (mn10300_saved_pc_after_call,
1752 mn10300_extract_return_value,
1753 mn10300_extract_struct_value_address, mn10300_store_return_value,
1754 mn10300_use_struct_convention, mn10300_breakpoint_from_pc,
1755 mn10300_frame_chain, mn10300_skip_prologue,
1756 mn10300_push_arguments, mn10300_push_return_address,
1757 mn10300_store_struct_return, mn10300_frame_saved_pc,
1758 mn10300_init_extra_frame_info, mn10300_frame_init_saved_regs):
1759 Make these functions static; they should only be visible to the
1760 outside world as gdbarch methods.
1762 * config/mn10300/tm-mn10300.h (mn10300_find_callers_reg): Delete
1765 * mn10300-tdep.c (mn10300_gdbarch_init): Put the gdbarch methods
1766 in some rational order.
1768 * mn10300-tdep.c (mn10300_gdbarch_init): Rather than using
1769 generic_pc_in_call_dummy, use pc_in_call_dummy_at_entry_point.
1771 Use gdbarch for most target parameters for the MN10300, rather
1772 than the tm-*.h file.
1773 * config/mn10300/tm-mn10300.h (MAX_REGISTER_VIRTUAL_SIZE,
1774 REGISTER_BYTES, FP_REGNUM, BREAKPOINT_FROM_PC,
1775 FUNCTION_START_OFFSET, DECR_PC_AFTER_BREAK, INNER_THAN,
1776 SAVED_PC_AFTER_CALL, INIT_EXTRA_FRAME_INFO, FRAME_INIT_SAVED_REGS,
1777 FRAME_CHAIN, FRAME_CHAIN_VALID, FRAME_SAVED_PC,
1778 EXTRACT_RETURN_VALUE, EXTRACT_STRUCT_VALUE_ADDRESS,
1779 STORE_RETURN_VALUE, STORE_STRUCT_RETURN, SKIP_PROLOGUE,
1780 FRAME_ARGS_SKIP, FRAME_ARGS_ADDRESS, FRAME_LOCALS_ADDRESS,
1781 FRAME_NUM_ARGS, POP_FRAME, USE_GENERIC_DUMMY_FRAMES, CALL_DUMMY,
1782 CALL_DUMMY_START_OFFSET, CALL_DUMMY_BREAKPOINT_OFFSET,
1783 CALL_DUMMY_LOCATION, FIX_CALL_DUMMY, CALL_DUMMY_ADDRESS,
1784 TARGET_READ_FP, PUSH_RETURN_ADDRESS, PUSH_DUMMY_FRAME,
1785 SAVE_DUMMY_FRAME_TOS, PUSH_ARGUMENTS, PC_IN_CALL_DUMMY,
1786 REG_STRUCT_HAS_ADDR, USE_STRUCT_CONVENTION, GET_SAVED_REGISTER):
1787 Delete definitions. We register gdbarch methods for these now.
1788 (struct frame_info, struct type, struct value): Delete forward
1789 declarations of these types; they're no longer necessary, since we
1790 don't have function declarations here any more.
1791 * mn10300-tdep.c: #include "arch-utils.h", to get declarations for
1792 some default gdbarch methods.
1793 (mn10300_store_struct_return): Return void, as expected by
1795 (mn10300_init_extra_frame_info): Take initial `fromleaf' argument,
1796 as expected by gdbarch.
1797 (mn10300_frame_init_saved_regs): Provide dummy definition for
1798 this, as required by gdbarch.
1799 (mn10300_gdbarch_init): Add mn10300_call_dummy_words, as expected
1800 by gdbarch. Register gdbarch methods or values for all the stuff
1801 removed from tm-10300.h, listed above.
1805 * cli-out.c (cli_begin, cli_end): Replace cli_list_begin and
1807 (cli_ui_out_impl): Update.
1809 * ui-out.c (default_begin, default_end): Replace
1810 default_list_begin and default_list_end.
1811 (default_ui_out_impl): Update.
1812 (uo_begin, uo_end): Replace ou_list_begin and uo_list_end.
1813 (ui_out_begin, ui_out_end): Replace ui_out_list_begin and
1815 (ui_out_list_begin, ui_out_list_end): New. Compatibility
1817 (struct ui_out_level): Add field type.
1818 (push_level, pop_level): Update. Add type parameter.
1820 * ui-out.h (enum ui_out_type): Declare.
1821 (ui_out_begin, ui_out_end): Declare.
1822 (ui_out_begin_ftype, ui_out_end_ftype): Replace list_begin_ftype
1824 (struct ui_out_impl): Update.
1828 * ui-out.h (list_begin_ftype, list_end_ftype): Rename argument
1829 ``list_flag'' to ``depth''.
1830 * ui-out.c (default_list_begin, default_list_end): Update.
1831 (uo_list_begin, uo_list_end): Update.
1832 (MAX_UI_OUT_LEVELS): Define.
1833 (struct ui_out_level): Define.
1834 (top-level): Include "gdb_assert.h".
1835 (struct ui_out): Add fields ``level'' and ``levels''. Delete
1836 fields ``list_flag'' and ``field_count''.
1837 (ui_out_new): Update.
1838 (verify_field_proper_position): Update.
1839 (current_level, push_level, pop_level): New functions.
1840 (ui_out_list_begin): Use push_level.
1841 (ui_out_list_end): Use pop_level.
1842 (ui_out_field_int): Use current_level.
1843 (ui_out_field_skip): Ditto.
1844 (ui_out_field_fmt): Ditto.
1848 * language.c (longest_local_hex_string_custom): Strlen test is
1849 inverted -- reverse the sense of the test.
1853 * config/i386/tm-i386v.h (struct frame_info, struct
1854 frame_saved_regs): Remove declarations.
1855 (i386_frame_num_args): Remove prototype.
1859 * MAINTAINERS: I'm no longer actively maintaining the mn10300
1864 * main.c (captured_main): Delete #ifndef _WIN32 conditional for
1869 * inferior.h (save_inferior_ptid): Declare.
1870 * infrun.c (save_inferior_ptid, restore_inferior_ptid): Define.
1872 * hpux-thread.c (save_inferior_ptid, restore_inferior_ptid):
1873 Delete these functions.
1874 * lin-lwp.c (save_inferior_ptid, restore_inferior_ptid): Likewise.
1875 * lin-thread.c (save_inferior_ptid, restore_inferior_ptid): Likewise.
1876 * linux-thread.c (save_inferior_ptid, restore_inferior_ptid):
1878 * proc-service.c (save_inferior_ptid, restore_inferior_ptid):
1880 * sol-thread.c (save_inferior_ptid, restore_inferior_ptid): Likewise.
1881 * thread-db.c (save_inferior_ptid, restore_inferior_ptid): Likewise.
1883 * somsolib.c (reset_inferior_ptid): Delete.
1884 (som_solib_remove_inferior_hook): Use save_inferior_ptid() to
1885 build the cleanup struct.
1887 * breakpoint.c (reattach_breakpoints, detach_breakpoints): Use
1888 a cleanup to save/restore inferior_ptid.
1892 Implement attach/detach for multi-threaded programs on Linux.
1893 * thread-db.c (keep_thread_db): Adjust comment.
1894 (deactivate_target): Removed.
1895 (thread_db_new_objfile): Don't call deactivate_target. Implement
1896 guts of deactivate_target inline instead.
1897 (attach_thread): Call ATTACH_LWP unconditionally if defined.
1898 (thread_db_attach): New function.
1899 (thread_db_detach): Don't call deactivate_target. Do necessary
1900 cleanup inline instead. Set inferior_ptid to LWP corresponding to
1901 the current user-level thread.
1902 (thread_db_kill): Set inferior_ptid to LWP corresponding to the
1903 current user-level thread.
1904 (thread_db_create_inferior): Deactivate target vector if
1905 KEEP_THREAD_DB is zero.
1906 (thread_db_mourn_inferior): Don't call deactivate_target. Do
1907 necessary cleanup inline instead.
1908 (init_thread_db_ops): Initialize to_attach field to
1910 * lin-lwp.c (lin_lwp_mourn_inferior): Remove prototype.
1911 (stop_wait_callback): Add prototype.
1912 (init_lwp_list): Add comment about when to re-initialize the LWP
1914 (lin_lwp_attach_lwp): Only call ptrace for cloned processes.
1915 Avoid adding publicates to the LWP list. Only mark an LWP as
1916 signalled if it doesn't correspond to a cloned process.
1917 (lin_lwp_attach): Add initial process to the LWP list. Make sure
1918 it's stopped and fake a SIGSTOP.
1919 (detach_callback): New function.
1920 (lin_lwp_detach): Implement.
1921 (lin_lwp_create_inferior): Don't re-initialize LWP list here.
1922 Call child_ops.to_create_inferior directly instead of via
1923 target_beneath local.
1924 (lin_lwp_mourn_inferior): Call child_ops.to_mourn_inferior
1925 directly instead of via target_beneath local.
1929 * symtab.c (lookup_symtab_1, lookup_partial_symtab): Use basename
1930 instead of non-portable search for `/'. Use FILENAME_CMP instead
1931 of STREQ, to account for case-insensitive filesystems.
1932 (top-level): #include "filenames.h".
1936 * breakpoint.c (check_duplicates): Use the breakpoint's type, not
1937 its address, to decide whether it's a watchpoint or not. Zero
1938 is a valid code address.
1939 (update_breakpoints_after_exec): Admonishing comments.
1940 * breakpoint.h (struct breakpoint): Doc fixes.
1942 * breakpoint.c (check_duplicates): Take a breakpoint object as an
1943 argument, rather than an address and section. All callers changed.
1947 * defs.h (ptid_t): New typedef.
1948 (pid_to_ptid, null_ptid, minus_one_ptid, ptid_equal): New macros.
1950 * a68v-nat.c, alphabsd-nat.c, arch-utils.c, arm-linux-nat.c,
1951 blockframe.c, breakpoint.c, breakpoint.h,
1952 config/i386/nm-i386sol2.h, config/i386/tm-i386sco5.h,
1953 config/ia64/nm-linux.h, config/m68k/nm-hp300bsd.h,
1954 config/mips/nm-irix4.h, config/mips/nm-irix5.h,
1955 config/pa/nm-hppah.h, config/pa/tm-hppa.h,
1956 config/rs6000/nm-rs6000.h, config/sparc/nm-sun4sol2.h,
1957 corelow.c, cxux-nat.c, d10v-tdep.c, dink32-rom.c,
1958 dve3900-rom.c, fork-child.c, frame.c, gnu-nat.c, go32-nat.c,
1959 hp300ux-nat.c, hppa-tdep.c, hppab-nat.c, hppah-nat.c,
1960 hpux-thread.c, i386-linux-nat.c, i386aix-nat.c, i386b-nat.c,
1961 i386bsd-nat.c, i386gnu-nat.c, i386mach-nat.c, i386nbsd-nat.c,
1962 infcmd.c, inferior.h, inflow.c, infptrace.c, infrun.c,
1963 inftarg.c, infttrace.c, lin-lwp.c, lin-thread.c,
1964 linux-thread.c, lynx-nat.c, m3-nat.c, m32r-rom.c,
1965 m68knbsd-nat.c, m88k-nat.c, mac-nat.c, mips-nat.c,
1966 mon960-rom.c, monitor.c, ns32knbsd-nat.c, ocd.c, ppc-bdm.c,
1967 ppcnbsd-nat.c, proc-service.c, procfs.c, ptx4-nat.c,
1968 regcache.c, remote-adapt.c, remote-array.c, remote-bug.c,
1969 remote-e7000.c, remote-es.c, remote-mips.c, remote-mm.c,
1970 remote-nindy.c, remote-os9k.c, remote-rdi.c, remote-rdp.c,
1971 remote-sds.c, remote-sim.c, remote-st.c, remote-udi.c,
1972 remote-vx.c, remote.c, rs6000-nat.c, sol-thread.c,
1973 solib-aix5.c, solib-svr4.c, somsolib.c, sparc-nat.c,
1974 standalone.c, sun3-nat.c, sun386-nat.c, symm-nat.c, target.c,
1975 target.h, thread-db.c, thread.c, top.c, ultra3-nat.c,
1976 uw-thread.c, v850ice.c, win32-nat.c, wince.c, xcoffsolib.c
1977 (inferior_pid): Rename to inferior_ptid everywhere - even in
1978 comments and obsolete ports. In cases where this variable
1979 really is supposed to be used as a process id, use PIDGET() to
1980 extract the process id component from inferior_ptid. The
1981 other cases, either involving other variables whose types had
1982 to be changed or functions whose signatures had to changed
1983 are listed separately below.
1985 * arm-linux-nat.c (get_thread_id): Change type of argument
1986 representing a combined process/thread id from ``int'' to
1987 ``ptid_t''. Also change parameter name to ptid.
1988 * breakpoint.h, breakpoint.c (breakpoint_thread_match): Likewise.
1989 * corelow.c (core_file_thread_alive): Likewise.
1990 * d10v-tdep.c (d10v_read_pc, d10v_write_pc): Likewise.
1991 * defs.h (*target_wait_hook): Likewise.
1992 * gdbthread.h (thread_info, delete_thread, pid_to_thread_id)
1993 (find_thread_pid, save_infrun_state, load_infrun_state): Likewise.
1994 * gnu-nat.c (gnu_thread_alive, gnu_pid_to_str, gnu_wait)
1995 (gnu_resume): Likewise.
1996 * go32-nat.c (go32_wait, go32_resume): Likewise.
1997 * h8500-tdep.c (h8500_read_pc, h8500_write_pc): Likewise.
1998 * hppa-tdep.c (target_read_pc, target_write_pc): Likewise.
1999 * hppah-nat.c (child_pid_to_str, hppa_tid_to_str,
2000 (hppa_pid_or_tid_to_str, child_post_startup_inferior)
2001 (child_thread_alive): Likewise.
2002 * hpux-thread.c (hpux_thread_notice_signals, hpux_thread_alive)
2003 (hpux_pid_to_str, hpux_thread_wait, hpux_thread_resume): Likewise.
2004 * i386-linux-nat.c (child_resume): Likewise.
2005 * ia64-linux-nat.c (enable_watchpoints_in_psr, fetch_debug_register)
2006 (store_debug_register, fetch_debug_register_pair)
2007 (store_debug_register_pair, ia64_linux_insert_watchpoint)
2008 (ia64_linux_remove_watchpoint, ia64_linux_stopped_by_watchpoint):
2010 * ia64-tdep.c (ia64_read_pc, ia64_write_pc): Likewise.
2011 * inferior.h (read_pc_pid, generic_target_read_pc, write_pc_pid)
2012 (generic_target_write_pc, ptrace_wait, child_resume)
2013 (get_last_target_status): Likewise.
2014 * infptrace.c (ptrace_wait, child_resume): Likewise.
2015 * inftarg.c (child_wait, child_post_wait, child_thread_live)
2016 (child_pid_to_str): Likewise.
2017 * infttrace.c (ptrace_wait, child_thread_alive, child_resume)
2018 (hppa_pid_or_tid_to_str, child_post_startup_inferior): Likewise.
2019 * lin-lwp.c (add_lwp, delete_lwp, find_lwp_pid, lin_lwp_attach_lwp)
2020 (lin_lwp_resume, lin_lwp_wait, lin_lwp_thread_alive)
2021 (lin_lwp_pid_to_str): Likewise.
2022 * lin-thread.c (thread_db_alive, thread_db_pid_to_str)
2023 (thread_db_resume, thread_db_wait): Likewise.
2024 * linux-thread.c (linuxthreads_thread_alive, linuxthreads_pid_to_str)
2025 (linuxthreads_resume, linuxthreads_wait): Likewise.
2026 * lynx-nat.c (child_wait, child_thread_alive, child_resume)
2027 (child_pid_to_str): Likewise.
2028 * m3-nat.c (mach_really_wait, m3_resume): Likewise.
2029 * mac-nat.c (child_wait, child_resume): Likewise.
2030 * mips-tdep.c (mips_read_pc): Likewise.
2031 * monitor.c (monitor_wait, monitor_resume): Likewise.
2032 * ocd.c, ocd.h (ocd_thread_alive, ocd_resume): Likewise.
2033 * ppc-bdm.c (bdm_ppc_wait): Likewise.
2034 * procfs.c (do_attach, procfs_wait, procfs_resume)
2035 (procfs_notice_signals, procfs_thread_alive, procfs_pid_to_str)
2036 (procfs_set_watchpoint, procfs_stopped_by_watchpoint)
2037 (procfs_find_LDT_entry): Likewise.
2038 * regcache.c (read_register_pid, read_signed_register_pid)
2039 (write_register_pid, generic_target_read_pc, read_pc_pid)
2040 (generic_target_write_pc, write_pc_pid): Likewise.
2041 * regcache.h (read_register_pid, read_signed_register_pid)
2042 (write_register_pid): Likewise.
2043 * remote-adapt.c (adapt_wait, adapt_resume): Likewise.
2044 * remote-array.c (array_wait, array_resume): Likewise.
2045 * remote-bug.c (bug_wait, bug_resume): Likewise.
2046 * remote-e7000.c (e7000_wait, e7000_resume): Likewise.
2047 * remote-eb.c (eb_wait, eb_resume): Likewise.
2048 * remote-es.c (es1800_wait, es1800_resume): Likewise.
2049 * remote-mips.c (mips_wait, mips_resume): Likewise.
2050 * remote-mm.c (mm_wait, mm_resume): Likewise.
2051 * remote-nindy.c (nindy_wait, nindy_resume): Likewise.
2052 * remote-os9k.c (rombug_wait, rombug_resume): Likewise.
2053 * remote-rdi.c (arm_rdi_wait, arm_rdi_resume): Likewise.
2054 * remote-rdp.c (remote_rdp_resume, remote_rdp_wait): Likewise.
2055 * remote-sds.c (sds_wait, sds_resume): Likewise.
2056 * remote-sim.c (gdbsim_wait, gdbsim_resume): Likewise.
2057 * remote-st.c (st2000_wait, st2000_resume): Likewise.
2058 * remote-udi.c (udi_wait, udi_resume): Likewise.
2059 * remote-vx.c (vx_wait, vx_resume): Likewise.
2060 * remote.c (remote_current_thread, remote_resume, remote_wait)
2061 (remote_async_resume, remote_async_wait, remote_cisco_wait)
2062 (remote_thread_alive): Likewise.
2063 * sol-thread.c (thread_to_lwp, lwp_to_thread, sol_thread_resume)
2064 (sol_thread_wait, sol_thread_notice_signals, sol_thread_alive)
2065 (solaris_pid_to_str): Likewise.
2066 * symm-nat.c (child_wait, child_resume): Likewise.
2067 * target.c (debug_to_resume, debug_to_wait, debug_to_post_wait)
2068 (debug_to_notice_signals, debug_to_thread_alive)
2069 (normal_target_post_startup_inferior, normal_pid_to_str)
2070 (debug_to_post_startup_inferior): Likewise.
2071 * target.h (to_resume, to_wait, to_post_wait)
2072 (to_post_startup_inferior, to_notice_signals, to_thread_alive)
2073 (to_pid_to_str [all in struct target_ops]): Likewise.
2074 (child_post_wait, child_thread_alive, normal_pid_to_str): Likewise.
2075 * thread-db.c (thread_from_lwp, lwp_from_thread, thread_db_wait)
2076 (attach_thread, detach_thread, thread_db_resume, check_event)
2077 (thread_db_post_startup_inferior, thread_db_thread_alive)
2078 (thread_db_pid_to_str): Likewise.
2079 * thread.c (add_thread, delete_thread, find_thread_pid)
2080 (pid_to_thread_id, in_thread_list, load_infrun_state)
2081 (save_infrun_state, switch_to_thread, restore_current_thread)
2082 (make_cleanup_restore_current_thread): Likewise.
2083 * top.c (target_wait_hook): Likewise.
2084 * uw-thread.c (dbgpid, thr_to_lwp, lwp_to_thr, add_thread_uw)
2085 (uw_thread_resume, libtrhead_stub, uw_thread_wait, uw_thread_alive)
2086 (uw_thread_pid_to_str): Likewise.
2087 * v850ice.c (v850ice_wait, v850ice_resume): Likewise.
2088 * win32-nat.c (child_wait, child_resume, win32_child_thread_alive)
2089 (cywin_pid_to_str): Likewise.
2090 * wince.c (child_wait, child_resume, win32_child_thread_alive):
2092 * config/nm-linux.h (linuxthreads_pid_to_str): Likewise.
2093 * config/nm-lynx.h (child_wait, lynx_pid_to_str): Likewise.
2094 * config/alpha/nm-linux.h (lin_lwp_attach_lwp): Likewise.
2095 * config/arm/nm-linux.h (lin_lwp_attach_lwp): Likewise.
2096 * config/h8500/tm-h8500.h (h8500_read_pc, h8500_write_pc): Likewise.
2097 * config/i386/nm-i386sol2.h (procfs_stopped_by_watchpoint)
2098 (procfs_set_watchpoint): Likewise.
2099 * config/i386/nm-linux.h (lin_lwp_attach_lwp): Likewise.
2100 * config/i386/nm-ptx4.h (child_wait): Likewise.
2101 * config/i386/nm-symmetry.h (child_wait): Likewise.
2102 * config/i386/tm-cygwin.h (cygwin_pid_to_str): Likewise.
2103 * config/ia64/nm-linux.h (ia64_linux_stopped_by_watchpoint)
2104 (ia64_linux_insert_watchpoint, ia64_linux_remove_watchpoint)
2105 (lin_lwp_attach_lwp): Likewise.
2106 * config/mips/nm-irix4.h, config/mips/nm-irix5.h
2107 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Likewise.
2108 * config/pa/nm-hppah.h (child_pid_to_str, hppa_tid_to_str)
2109 (hppa_pid_or_tid_to_str): Likewise.
2110 * config/pa/tm-hppa.h (target_read_pc, target_write_pc): Likewise.
2111 * config/powerpc/nm-linux.h (lin_lwp_attach_lwp): Likewise.
2112 * config/sparc/nm-sun4sol2.h (procfs_stopped_by_watchpoint)
2113 (procfs_set_watchpoint): Likewise.
2115 * gdbthread.h (thread_id_to_pid): Change return type which
2116 represents a combined process/thread id from ``int'' to
2118 * gnu-nat.c (gnu_wait): Likewise.
2119 * go32-nat.c (go32_wait): Likewise.
2120 * hpux-thread.c (hpux_thread_wait): Likewise.
2121 * inferior.h (procfs_first_available): Likewise.
2122 * inftarg.c (child_wait): Likewise.
2123 * infttrace.c (ptrace_wait): Likewise.
2124 * lin-lwp.c (lin_lwp_wait): Likewise.
2125 * lin-thread.c (thread_db_wait): Likewise.
2126 * linux-thread.c (linuxthreads_wait): Likewise.
2127 * lynx-nat.c (child_wait): Likewise.
2128 * m3-nat.c (mach_really_wait): Likewise.
2129 * mac-nat.c (child_wait): Likewise.
2130 * monitor.c (monitor_wait): Likewise.
2131 * ppc-bdm.c (bdm_ppc_wait): Likewise.
2132 * procfs.c (do_attach, procfs_wait, procfs_first_available): Likewise.
2133 * remote-adapt.c (adapt_wait): Likewise.
2134 * remote-array.c (array_wait): Likewise.
2135 * remote-bug.c (bug_wait): Likewise.
2136 * remote-e7000.c (e7000_wait): Likewise.
2137 * remote-eb.c (eb_wait): Likewise.
2138 * remote-es.c (es1800_wait): Likewise.
2139 * remote-mips.c (mips_wait): Likewise.
2140 * remote-mm.c (mm_wait): Likewise.
2141 * remote-nindy.c (nindy_wait): Likewise.
2142 * remote-os9k (rombug_wait): Likewise.
2143 * remote-rdi.c (arm_rdi_wait): Likewise.
2144 * remote-rdp.c (remote_rdp_wait): Likewise.
2145 * remote-sds.c (sds_wait): Likewise.
2146 * remote-sim.c (gdbsim_wait): Likewise.
2147 * remote-st.c (st2000_wait): Likewise.
2148 * remote-udi.c (udi_wait): Likewise.
2149 * remote-vx.c (vx_wait): Likewise.
2150 * remote.c (remote_wait, remote_async_wait, remote_current_thread)
2151 (remote_cisco_wait): Likewise.
2152 * sol-thread.c (thread_to_lwp, lwp_to_thread, sol_thread_wait):
2154 * symm-nat.c (child_wait): Likewise.
2155 * target.c (debug_to_wait): Likewise.
2156 * target.h (to_wait [in struct target_ops]): Likewise.
2157 * thread.c (thread_id_to_pid): Likewise.
2158 * thread-db.c (thread_from_lwp, lwp_from_thread, thread_db_wait):
2160 * top.c (*target_wait_hook): Likewise.
2161 * uw-thread.c (lwp_to_thr, uw_thread_wait): Likewise.
2162 * v850ice.c (v850ice_wait): Likewise.
2163 * win32-nat.c (child_wait): Likewise.
2164 * wince.c (child_wait): Likewise.
2165 * config/nm-lynx.h (child_wait): Likewise.
2166 * config/i386/nm-ptx4.h (child_wait): Likewise.
2167 * config/i386/nm-symmetry.h (child_wait): Likewise.
2169 * arch-utils.c (generic_prepare_to_proceed): Rename wait_pid
2170 to wait_ptid and change its type from ``int'' to ``ptid_t''.
2171 * breakpoint.c (reattach_breakpoints, detach_breakpoints): Likewise,
2172 but rename saved_inferior_pid to saved_inferior_ptid.
2173 * d10v-tdep.c (d10v_read_pc, d10_write_pc): Likewise, but rename
2174 save_pid to save_ptid.
2175 * gdbthread.h (struct thread_info): Likewise, but rename pid to ptid.
2176 * hppah-nat.c (child_pid_to_exec): Likewise, but rename
2177 saved_inferior_pid to saved_inferior_ptid.
2178 * hpux-thread.c (main_ptid): Likewise, but rename from main_pid.
2179 * infrun.c (previous_inferior_pid [static global]): Likewise,
2180 but rename to previous_inferior_ptid.
2181 (resume): Likewise, but rename resume_pid to resume_ptid.
2182 (struct execution_control_state): Likewise, but rename
2183 pid to ptid, saved_inferior_pid to saved_inferior_ptid,
2184 and waiton_pid to waiton_ptid.
2185 (target_last_wait_pid): Likewise, but rename to
2186 target_last_wait_ptid.
2187 * infttrace.c (saved_real_pid): Likewise, but rename to
2189 (child_pid_to_exec_file): Likewise, but rename saved_inferior_pid
2190 to saved_inferior_ptid.
2191 * lin-lwp.c (struct lwp_info): Likewise, but rename pid to ptid.
2192 (trap_ptid): Likewise, but renamed from trap_pid.
2193 * lin-thread.c (handle_new_thread): Likewise, but rename gdb_pid
2195 * linux-thread.c (detach_thread): Likewise, but rename pid to ptid.
2196 (thread_db_wait): Likewise, but rename ret_pid to retptid.
2197 * procfs.c (procfs_wait): Likewise, for retval whose name
2198 doesn't change. Also, ``temp'' becomes two separate variables,
2199 one named temp_tid (an int) and the other temp_ptid.
2200 (procfs_notice_thread): Likewise (type change) for gdb_threadid
2201 whose name does not change.
2202 * regcache.c (registers_ptid): Likewise, but renamed from
2204 (read_register_pid, read_signed_register_pid, write_register_pid):
2205 Likewise, but rename save_pid to save_ptid.
2206 (read_pc_pid, write_pc_pid): Likewise, but rename saved_inferior_pid
2207 to saved_inferior_ptid.
2208 * remote.c (remote_newthread_step): Likewise, but rename pid to ptid.
2209 * sol-thread.c (struct ps_prochandle): Likewise.
2210 (sol_thread_resume): Likewise, for save_pid which becomes save_ptid.
2211 (sol_thread_wait): Likewise, for rtnval whose name does not
2212 change, and for save_pid which becomes save_ptid.
2213 (solaris_pid_to_str): Likewise for lwp whose name does not change.
2214 (sol_find_new_threads_callback): Likewise, for pid which becomes
2216 * target.h (target_resume, target_wait, target_post_wait)
2217 (target_post_startup_inferior, target_notice_signals)
2218 (target_thread_alive): Likewise.
2219 * thread.c (info_threads_command): Likewise, but rename
2220 current_pid to current_ptid.
2221 (struct current_thread_cleanup): Likewise, but rename field
2222 inferior_pid to inferior_ptid.
2223 * thread-db.c (find_new_threads_callback): Likewise, but rename
2225 * uw-thread.c (thr_to_lwp): Likewise for lid whose name does not
2227 (lwp_to_tr): Likewise fo tid whose name remains unchanged.
2228 (thr_infpid, lwp_infpid, notice_thread, libthread_stub): Likewise,
2229 but rename pid to ptid.
2230 * config/alpha/nm-linux.h (ATTACH_LWP): Likewise.
2231 * config/arm/nm-linux.h (ATTACH_LWP): Likewise.
2232 * config/i386/nm-linux.h (ATTACH_LWP): Likewise.
2233 * config/ia64/nm-linux.h (ATTACH_LWP): Likewise.
2234 * config/pa/nm-hppah.h (target_tid_to_str): Likewise.
2235 * config/powerpc/nm-linux.h (ATTACH_LWP): Likewise.
2237 * arch-utils.c (generic_prepare_to_proceed): Test for the
2238 "zero" ptid by using ptid_equal() to test to see if variable
2239 in question is the same as null_ptid. This replaces a direct
2241 * cxux-nat.c (add_shared_symbol_files): Likewise.
2242 * i386aix-nat.c, i386b-nat.c (i386_float_info): Likewise.
2243 * infcmd.c (run_command): Likewise.
2244 * inflow.c (kill_command): Likewise.
2245 * infttrace.c (call_ttrace): Likewise.
2246 * lin-lwp.c (lin_lwp_prepare_to_proceed): Likewise.
2247 * lin-thread.c (thread_db_kill): Likewise.
2248 * procfs.c (procfs_kill_inferior, procfs_mourn_inferior): Likewise.
2249 * remote-es.c (es1800_kill): Likewise.
2250 * sol-thread.c (sol_thread_create_inferior): Likewise.
2251 * solib.c (locate_base): Likewise.
2252 * target.c (nosupport_runtime): Likewise.
2253 * thread-db.c (thread_db_wait): Likewise.
2254 * top.c (quit_confirm, quit_force): Likewise.
2255 * uw-thread (lwp_infpid, uw_thread_resume): Likewise.
2257 * infrun.c (handle_inferior_event, stop_stepping, normal_stop):
2258 Use ptid_equal to compare value of process/thread ids instead of
2259 ``=='' and ``!='' operators.
2260 lin-lwp.c (delete_lwp, lin_lwp_prepare_to_proceed)
2261 (stop_wait_callback, lin_lwp_wait): Likewise.
2262 * procfs.c (procfs_wait): Likewise.
2263 * regcache.c (read_register_bytes, read_register_gen)
2264 (write_register_gen, read_register, read_register_pid)
2265 (read_signed_register, read_signed_register_pid, write_register)
2266 (write_register_pid, supply_register): Likewise.
2267 * remote-vx.c (vx_resume): Likewise.
2268 * sol-thread.c (sol_thread_wait): Likewise.
2269 * symm-nat.c (kill_inferior): Likewise.
2270 * thread.c (delete_thread, find_thread_pid, pid_to_thread_id)
2271 (in_thread_list, info_threads_command, switch_to_thread)
2272 (restore_current_thread): Likewise.
2273 * uw-thread (libtread_stub): Likewise.
2275 * arm-linux-nat.c (GET_THREAD_ID): Change PID to PTID.
2277 * corelow.c (add_to_thread_list): Convert argument in add_thread()
2279 * gnu-nat.c (inf_validate_procs): Likewise.
2280 * linux-thread.c (stop_thread, update_stop_threads): Likewise.
2281 * remote.c (record_currthread, remote_threads_info): Likewise.
2282 * win32-nat.c (child_add_thread): Likewise.
2284 * hpux-thread.c (save_inferior_pid, restore_inferior_pid): Rename,
2285 respectively, to save_inferior_ptid() and restore_inferior_ptid().
2286 Adjust implementations to operate on ``ptid_t'' instead of ``int''.
2287 * lin-lwp.c (save_inferior_pid, restore_inferior_pid): Likewise.
2288 * lin-thread.c (save_inferior_pid, restore_inferior_pid): Likewise.
2289 * linux-thread.c (save_inferior_pid, restore_inferior_pid): Likewise.
2290 * proc-service.c (save_inferior_pid, restore_inferior_pid): Likewise.
2291 * sol-thread.c (save_inferior_pid, restore_inferior_pid): Likewise.
2292 * thread-db.c (save_inferior_pid, restore_inferior_pid): Likewise.
2294 * infrun.c (RESUME_ALL): New macro representing the -1 ptid
2295 to be passed to target_resume() when all threads should resume.
2296 (resume): Set resume_ptid to RESUME_ALL rather than -1.
2297 (handle_inferior_event): Invoke target_resume() with RESUME_ALL
2299 * irix5-nat.c (solib_create_inferior_hook): Convert -1 to
2300 a ptid_t in target_resume() call.
2301 * osfsolib.c (solib_create_inferior_hook): Likewise.
2302 * solib-svr4.c (solib_create_inferior_hook): Likewise.
2304 * lin-lwp.c (PIDGET, PIDGET0): Rename original PIDGET macro to
2305 PIDGET0. Define new PIDGET macro which uses PIDGET0, the only
2306 difference being that the 0xffff pattern will be interpreted
2308 * lin-thread.c (PIDGET, PIDGET0): Likewise.
2309 * thread-db.c (PIDGET, PIDGET0): Likewise.
2310 * config/nm-linux.h (PIDGET, PIDGET0): Likewise.
2311 * config/i386/tm-i386sol2.h (PIDGET, PIDGET0): Likewise.
2312 * config/i386/tm-i386v42mp.h (PIDGET, PIDGET0): Likewise.
2313 * config/sparc/tm-sun4sol2.h (PIDGET, PIDGET0): Likewise.
2315 * m3-nat.c (init_m3_ops): Fix typo; initialize to_wait field to
2316 mach_really_wait rather than mach_really__wait.
2317 * lin-thread.c (check_for_thread_event): Fix warning; make function
2318 actually return a value.
2320 * gdbarch.sh (TARGET_READ_PC, TARGET_WRITE_PC): Change type of
2321 ``pid'' arguments from ``int'' to ``ptid_t''. Also renamed
2323 * gdbarch.h, gdbarch.c: Regenerated.
2327 * rdi-share/devsw.c: Include <time.h> for struct tm
2331 * config/djgpp/fnchange.lst: Add mappings for the new
2332 opcodes/openrisc-* files.
2336 * lin-lwp.c: Change printf to fprintf_unfiltered.
2337 * Makefile.in: Add rules for thread-db.o, lin-lwp.o, proc-service.o.
2341 * config/rs6000/tm-rs6000.h (IN_SOLIB_RETURN_TRAMPOLINE): Define.
2342 (rs6000_in_solib_return_trampoline): Declare.
2343 * rs6000-tdep.c (rs6000_in_solib_return_trampoline): New
2345 (rs6000_skip_trampoline_code): Skip bigtoc fixup code.
2346 * xcoffread.c (read_xcoff_symtab): Perform the ISFCN function
2347 check after the CSECT check rather than before it. Allocate
2348 separate symtabs for CSECTs whose names begin with '@'.
2349 (scan_xcoff_symtab): Don't ignore symbols beginning with '@'.
2350 Activate the misc_func_recorded mechanism for whose names begin
2355 * ppcnbsd-nat.c (fetch_inferior_registers)
2356 (store_inferior_registers, fetch_core_registers): Changed to use
2357 fpreg[] instead of r_regs[] to access floating point registers.
2361 * sh-tdep.c: Get rid of the function prototypes.
2362 (sh_sh4_build_float_register_type): Move earlier in file.
2363 (fv_reg_base_num): Ditto.
2364 (dr_reg_base_num): Ditto.
2368 * thread-db.c: Revert 2001-04-26 change for debugging output.
2370 * lin-lwp.c: Add set/show debug lin-lwp command. Use this
2371 command to turn extra debugging output on / off.
2375 * buildsym.c (start_subfile): Use FILENAME_CMP instead of STREQ.
2376 (top-level): #include filenames.h.
2378 * dwarf2read.c (dwarf2_start_subfile): Use IS_ABSOLUTE_PATH and
2379 FILENAME_CMP, to DTRT on non-Posix platforms.
2380 (top-level): #include filenames.h.
2385 * gdbtypes.c (check_stub_method): Always initialize ``p''.
2389 * configure.host: Delete romp host.
2394 * TODO: Updates to 5.1. No more targets to obsolete.
2398 (Changes from Kevin Buettner, with minor update by Don Howard.)
2400 * i387-nat.c (i387_supply_fxsave, i387_fill_fxsave, i387_tag): Fix
2401 typos in which hexadecimal constants were really intended to be
2403 (i387_tag): Swap logic regarding zero vs non-zero exponents.
2404 * MAINTAINERS (Misc): Added myself to the write-after-approval
2409 (Changes from Daniel Berlin, with revisions by Jim Blandy.)
2411 Abstract out operations specific to particular C++ ABI's, and
2412 invoke them through a function table. This removes the C++ ABI
2413 dependencies scattered throughout the code, and allows us to
2414 cleanly add support for new C++ ABI's.
2415 * cp-abi.h, cp-abi.h, gnu-v2-abi.c, hpacc-abi.c: New files.
2416 * c-typeprint.c, c-valprint.c, dbxread.c, eval.c, gdbtypes.c,
2417 jv-typeprint.c, linespec.c, symtab.c, typeprint.c, valops.c:
2418 #include "cp-abi.h". These files all use functions now declared
2420 * symtab.h (OPNAME_PREFIX_P, VTBL_PREFIX_P, DESTRUCTOR_PREFIX_P):
2421 Deleted. These services are now provided by functions declared in
2423 * value.h (value_rtti_type, value_virtual_fn_field): Same.
2424 * values.c (value_virtual_fn_field): Same, for this definition.
2425 * valops.c (value_rtti_type): Same.
2426 * c-typeprint.c (c_type_print_base): Use the functions from
2427 "cp-abi.h", instead of the old macros, or hard-coded ABI-specific
2429 * dbxread.c (record_minimal_symbol): Same.
2430 * gdbtypes.c (get_destructor_fn_field, virtual_base_index,
2431 virtual_base_index_skip_primaries): Same.
2432 * jv-typeprint.c (java_type_print_base): Same.
2433 * linespec.c (find_methods, decode_line_1): Same.
2434 * symtab.c (gdb_mangle_name): Same.
2435 * Makefile.in (SFILES): Add the new .c files mentioned above.
2436 (cp_abi_h): New variable.
2437 (COMMON_OBS): Add gnu-v2-abi.o, hpacc-abi.o, and cp-abi.o.
2438 (cp-abi.o, gnu-v2-abi.o, hpacc-abi.o): New targets.
2439 (c-typeprint.o, c-valprint.o, dbxread.o, eval.o, gdbtypes.o,
2440 jv-typeprint.o, symtab.o, linespec.o, typeprint.o, valops.o): Add
2441 dependency on $(cp_abi_h).
2445 * thread-db.c (_initialize_thread_db): Add set/show command
2446 "debug-linux-threads" for debugging output.
2447 * lin-lwp.c (various): Use global "debug_linux_threads to
2448 turn on extra debugging output.
2449 * lin-lwp.c: Minor cleanups in comments.
2450 * target.c (normal_pid_to_str): Get rid of an ancient hack.
2451 * remote.c (remote_pid_to_str): New function for remote target.
2455 * c-typeprint.c (c_type_print_cv_qualifier): Don't print `const'
2456 qualifier on C++ references; all references are innately const.
2460 * event-top.h: Fix formatting.
2464 * source.c (openp): Obsolete #ifdef MPW code.
2465 (open_source_file): Ditto.
2466 * event-top.c (display_gdb_prompt): Ditto.
2467 * utils.c (query): Ditto.
2468 (init_page_info): Ditto.
2469 (init_page_info): Delete #ifndef MPW.
2470 * top.c (gdb_readline): Ditto.
2471 * mac-xdep.c: Obsolete.
2472 * mac-gdb.r: Obsolete.
2473 * config/powerpc/xm-mpw.h: Obsolete.
2474 * config/xm-mpw.h: Obsolete.
2475 * mpw-make.sed: Obsolete.
2476 * mpw-config.in: Obsolete.
2482 * i386-tdep.c (i386_frameless_function_invocation): New function.
2483 * config/i386/tm-i386.h (FRAMELESS_FUNCTION_INVOCATION): Redefine
2484 in terms of i386_frameless_function_invocation. Adjust comment.
2485 (i386_frameless_function_invocation): New prototype.
2489 * top.c (gdb_init): Don't call cli_out_new() to
2490 create global uiout if init_ui_hook is set. uiout will
2491 have to be initialized there.
2495 * arch-utils.c: Include "regcache.h".
2499 * i386-tdep.c (i386_saved_pc_after_call): New function.
2500 * config/i386/tm-i386.h (SAVED_PC_AFTER_CALL): Redefine in terms
2501 of i386_saved_pc_after_call.
2502 (i386_saved_pc_after_call): New prototype.
2506 * i386-nat.c: Fix typo in comment.
2507 * solib.c (no_shared_libraries): New function. Discard all symbols
2508 from shared libraries.
2509 (_initialize_solib): Add command "nosharedlibrary" as complement
2510 to the command "sharedlibrary". Unloads symbols for all solibs.
2514 * configure.host (m68030-sony-*, m68*-isi-*, m68*-sony-*):
2515 * configure.tgt (m68*-rom68k-*, m68*-*bug-*, m68*-monitor-*)
2516 (m68*-est-*, m68*-sony-*, m68*-isi-*):
2517 * Makefile.in (xm-news1000.h, tm-news.h, xm-news.h): Obsolete..
2518 * config/m68k/xm-news.h: Obsolete.
2519 * config/m68k/tm-news.h:
2520 * config/m68k/xm-news1000.h: Obsolete.
2521 * config/m68k/news.mh: Obsolete.
2522 * config/m68k/news.mt: Obsolete.
2523 * config/m68k/nm-news.h: Obsolete.
2524 * config/m68k/news1000.mh: Obsolete.
2525 * news-xdep.c: Obsolete.
2526 * Makefile.in (isi-xdep.o): Obsolete.
2527 (ALLDEPFILES): Delete isi-xdep.c.
2528 (tm-isi.h): Obsolete.
2529 * m68k-tdep.c (altos_skip_prologue): Update comments.
2530 (isi_skip_prologue): Obsolete.
2531 * isi-xdep.c: Obsolete.
2532 * config/m68k/xm-isi.h: Obsolete.
2533 * config/m68k/isi.mh: Obsolete.
2534 * config/m68k/tm-isi.h: Obsolete.
2535 * config/m68k/isi.mt: Obsolete.
2542 * remote.c (remote_open_1): On opening the remote target, activate
2543 the solib_create_inferior_hook, so that it can detect when the
2544 target loads shared libraries.
2545 (remote_async_open_1): Ditto.
2549 * breakpoint.c (print_one_breakpoint): Handle 64-bit addresses.
2550 * tracepoint.c (tracepoints_info): Handle 64-bit addresses.
2551 * testsuite/gdb.trace/deltrace.exp: Allow for 64-bit addresses.
2552 * testsuite/gdb.trace/infotrace.exp: Ditto.
2553 * testsuite/gdb.trace/passcount.exp: Ditto.
2554 * testsuite/gdb.trace/while-stepping.exp: Ditto.
2558 * thread-db.c (check_thread_signals): When looping over all
2559 signals, ignore signal zero.
2560 (disable_thread_signals): Ditto.
2564 * thread.c (do_captured_thread_select): Allow the argument to the
2565 thread command to be an expression rather than a literal integer.
2569 * i386-linux-tdep.c (i386_linux_saved_pc_after_call): Use
2570 read_memory_unsigned_integer instead of read_memory_integer.
2574 * solib-aix5.c (map_index_vs_section_name_okay): New function.
2575 (aix5_relocate_main_executable): Don't use file offsets for
2576 determining corresponding sections and map file entries. Call
2577 map_index_vs_section_name_okay() to do this instead.
2581 * procfs.c (open_with_retry): New function.
2582 (open_procinfo_files, load_syscalls, proc_iterate_over_mappings)
2583 (proc_get_LDT_entry): Call open_with_retry() instead of open().
2587 * ia64-linux-nat.c (ia64_linux_stopped_by_watchpoint): Adjust
2588 comparison against TRAP_HWBKPT constant yet again to account
2589 for the various values used by different kernel versions.
2593 * demangle.c (_initialize_demangler): Use xcalloc on the
2594 demangling_style_names, and make it a null terminated array of
2595 names, to avoid a crash.
2599 * i386-tdep.c (i386_frame_chain): New function.
2600 * config/i386/tm-i386.h (FRAME_CHAIN): Redefine in terms of
2602 (i386_frame_chain): New prototype.
2606 * target.h (target_ops): Removed to_core_file_to_sym_file vector
2608 * corelow.c (core_ops): Updated for above change.
2609 * gnu-nat.c (core_ops): Likewise.
2610 * inftarg.c (child_ops): Likewise.
2611 * monitor.c (monitor_ops): Likewise.
2612 * ppc-bdm.c (bdm_ppc_ops): Likewise.
2613 * remote-adapt.c (adapt_ops): Likewise.
2614 * remote-bug.c (bug_ops): Likewise.
2615 * remote-e7000.c (e7000_ops): Likewise.
2616 * remote-eb.c (eb_ops): Likewise.
2617 * remote-es.c (es1800_ops, es1800_child_ops): Likewise.
2618 * remote-mm.c (mm_ops): Likewise.
2619 * remote-nindy.c (nindy_ops): Likewise.
2620 * remote-nrom.c (nrom_ops): Likewise.
2621 * remote-os9k.c (rombug_ops): Likewise.
2622 * remote-rdp.c (remote_rdp_ops): Likewise.
2623 * remote-sim.c (gdbsim_ops): Likewise.
2624 * remote-st.c (st2000_ops): Likewise.
2625 * v850ice.c (v850ice_ops): Likewise.
2626 * target.c (cleanup_target): Likewise
2627 (update_current_target): Likewise.
2628 (setup_target_debug): Likewise
2629 (debug_to_core_file_to_sym_file): Removed.
2631 * corefile.c (core_file_command) [HPUXHPPA]: Removed code that
2632 sets symbol file from information obtained from the core file.
2633 * corelow.c (core_file_to_sym_file): Removed.
2638 Fixed Insight on Solaris. It was not possible to debug a process
2639 because of EINTR "errors".
2640 * procfs.c: (procfs_wait): if proc_wait_for_stop() fails
2641 with EINTR, retry the call.
2645 * solib-aix5.c (enum maptype): Delete.
2646 (struct lm_info): Add new member ``nmappings''. Make ``mapping''
2647 member a pointer instead of a statically sized array.
2648 (build_so_list_from_mapfile): Dynamically allocate ``mapping''
2650 (aix5_relocate_main_executable, aix5_relocate_section_addresses,
2651 aix5_find_global_pointer): Search for correct mapping to use
2652 based on file offset instead of knowledge of whether the section
2653 is read-only or read/write.
2654 (aix5_find_gate_addresses): Use the first mapping instead of
2655 the (now defunct) MT_READONLY mapping.
2659 * xcoffread.c (scan_xcoff_symtab): Ignore symbols beginning with
2664 * config/i386/fbsd.mh (NATDEPFILES): Add i386-nat.o.
2668 Obsolete i[3456]86-*-sunos* (aka Sun386) host and target.
2669 * config/i386/sun386.mh: Obsolete.
2670 * config/i386/sun386.mt: Obsolete.
2671 * config/i386/xm-sun386.h: Obsolete.
2672 * config/i386/tm-sun386.h: Obsolete.
2673 * config/i386/nm-sun386.h: Obsolete.
2674 * Makefile.in (ALLDEPFILES): Delete sun386-nat.c.
2675 (sun386-nat.o): Target is obsolete.
2676 * sun386-nat.c: Obsolete.
2677 * configure.tgt (i[3456]86-*-sunos*): Obsolete.
2678 * configure.host (i[3456]86-*-sunos*): Obsolete.
2684 * maint.c: Fix typo in comment.
2688 * MAINTAINERS: Swap with Syd Polk as a gdbtk maintainer.
2692 * fork-child.c (fork_inferior, clone_and_follow_inferior):
2693 Document fact that apparent call to vfork() might actually be
2694 a call to fork() instead.
2695 * ser-pipe.c (pipe_open): Likewise.
2699 * printcmd.c (print_frame_args): Use a cleanup to invoke
2700 ui_out_list_end() so that the list count nesting flag will
2701 be decremented properly when an error occurs.
2702 * stack.c (print_frame): Likewise.
2706 * dcache.c (dcache_write_line): Fixed bugs where cache line was
2707 not written to target correctly.
2709 * gdbserver/low-hppabsd.c (read_inferior_memory): Add explicit
2711 * gdbserver/low-nbsd.c: Likewise.
2712 * gdbserver/low-sparc.c: Likewise.
2713 * gdbserver/low-sun3.c: Likewise.
2717 * config/rs6000/nm-rs6000.h (PTRACE_ATTACH): Don't define.
2718 (PTRACE_DETACH): Don't define.
2722 * arch-utils.c (default_prepare_to_proceed)
2723 (generic_prepare_to_proceed): Added new functions.
2724 * arch-utils.h: New function declarations for
2725 default_prepare_to_proceed() and generic_prepare_to_proceed().
2726 * gdbarch.sh: Added PREPARE_TO_PROCEED.
2727 * gdbarch.c: Regenerated.
2728 * gdbarch.h: Regenerated.
2729 * inferior.h: Added get_last_target_status() declaration.
2730 * infrun.c (get_last_target_status): Added new function.
2731 (handle_inferior_event): Saves last pid and waitstatus, which will
2732 get returned by get_last_target_status().
2734 * hppa-tdep.c (prepare_to_proceed): Added comment stating that
2735 prepare_to_proceed() is potentially redundant since
2736 default_prepare_to_proceed() has been added.
2737 * linux-thread.c (prepare_to_proceed): Ditto.
2738 * lin-lwp.c (prepare_to_proceed): Ditto.
2739 * m3-nat.c (prepare_to_proceed): Ditto.
2743 Obsolete powerpcle-*-cygwin* and powerpcle-*-solaris* platforms
2744 and powerpc-*-netware* target.
2745 * configure.host (powerpcle-*-cygwin*, powerpcle-*-solaris*):
2747 * configure.tgt (powerpc-*-netware*, powerpcle-*-cygwin*)
2748 (powerpcle-*-solaris*): Obsolete.
2749 * config/powerpc/tm-cygwin.h: Obsolete.
2750 * config/powerpc/cygwin.mt: Obsolete.
2751 * config/powerpc/xm-cygwin.h: Obsolete.
2752 * config/powerpc/cygwin.mh: Obsolete.
2753 * config/powerpc/nm-solaris.h: Obsolete.
2754 * config/powerpc/xm-solaris.h: Obsolete.
2755 * config/powerpc/tm-solaris.h: Obsolete.
2756 * config/powerpc/solaris.mt: Obsolete.
2757 * config/powerpc/tm-ppc-nw.h: Obsolete.
2758 * config/powerpc/ppc-nw.mt: Obsolete.
2764 * buildsym.c (record_line): Turn off unused addr bits.
2769 * inferior.h: Fix declarations of get_inferior_args and
2770 set_inferior_args, which were missing the trailing 's'.
2774 * monitor.c (monitor_supply_register): Only report an error if we
2775 don't get a valid value.
2779 * README: Don't mention gdba.el.
2784 * top.c (init_main): set prompt if annotation_level>1,
2785 this is necessary when annotation_level is set to 2 via
2786 --annotate=2 command line option.
2790 Obsolete a29k-*-* host and a29k-*-sym1* and a29k-*-kern* targets.
2791 * configure.tgt (a29k-*-sym1*, a29k-*-kern*): Obsolete.
2792 * configure.host (a29k-*-*): Obsolete.
2793 * Makefile.in (ALLDEPFILES): Remove ultra3-nat.c and
2795 (ultra3-nat.o, ultra3-xdep.o): Obsolete.
2796 * config/a29k/tm-ultra3.h: Obsolete.
2797 * config/a29k/ultra3.mt: Obsolete.
2798 * config/a29k/ultra3.mh: Obsolete.
2799 * config/a29k/nm-ultra3.h: Obsolete.
2800 * config/a29k/xm-ultra3.h: Obsolete.
2801 * ultra3-xdep.c: Obsolete.
2802 * ultra3-nat.c: Obsolete.
2803 * config/a29k/a29k-kern.mt: Obsolete.
2809 * main.c: Remove windows.h use.
2810 (gdbtk_test): Use PATH_MAX for home var calculation.
2811 * remote-e7000.c (e7000_parse_device): Accomodate Cygwin as well as
2812 Win32 in colon test.
2813 * ser-tcp.c: Use modern __CYGWIN__ conditional.
2814 * source.c (mod_path): Add __CYGWIN__ conditional to WIN32 test.
2816 * symfile.c (symfile_bfd_open): Ditto.
2820 * main.c (captured_main): For GDBtk, don't use tui_fileopen().
2821 Handle all stream setup in gdbtk_init
2825 * i386-tdep.c (i386_extract_return_value): Don't return the return
2826 value of a void function.
2827 (i386_store_return_value): Likewise.
2831 Obsolete w65-*-* target.
2832 * configure.tgt (w65-*-*): Obsolete.
2833 * config/w65/w65.mt: Obsolete.
2834 * config/w65/tm-w65.h: Obsolete.
2835 * w65-tdep.c: Obsolete.
2836 * NEWS: Update. Fix TiC80 description.
2841 Obsolete tic80-*-* target.
2842 * configure.tgt (tic80-*-*): Obsolete.
2843 * config/tic80/tic80.mt: Obsolete.
2844 * config/tic80/tm-tic80.h: Obsolete.
2845 * tic80-tdep.c: Obsolete.
2851 * remote-mips.c (S_IROTH): Moved definition from here.
2852 * gdb_stat.h (S_IROTH): to here.
2854 * remote.c (remote_protocol_e, remote_protocol_E): Define.
2855 (set_remote_protocol_e_packet_cmd)
2856 (set_remote_protocol_E_packet_cmd)
2857 (show_remote_protocol_e_packet_command)
2858 (show_remote_protocol_E_packet_command): New functions.
2859 (init_all_packet_configs): Initialize remote_protocol_e and
2861 (remote_resume, remote_async_resume): Support e/E command
2863 (show_remote_cmd): Show state of remote_protocol_e and
2865 (_initialize_remote): Add "set remote step-over-range-packet"
2866 and "set remote step-over-range-w-signal-packet" to CLI.
2870 Obsolete ns32k-*-mach3*, ns32k-umax-*, ns32k-utek-sysv* and
2872 * Makefile.in (ALLDEPFILES): Delete umax-xdep.c and ns32km3-nat.c.
2873 (umax-xdep.o, ns32km3-nat.o): Obsolete.
2874 * configure.tgt (ns32k-*-mach3*, ns32k-utek-sysv*, ns32k-utek-*):
2876 * configure.host (ns32k-*-mach3*, ns32k-umax-*, ns32k-utek-sysv*):
2878 * config/ns32k/merlin.mh: Obsolete.
2879 * config/ns32k/merlin.mt: Obsolete.
2880 * config/ns32k/xm-merlin.h: Obsolete.
2881 * config/ns32k/tm-merlin.h: Obsolete.
2882 * config/ns32k/nm-umax.h: Obsolete.
2883 * config/ns32k/umax.mh: Obsolete.
2884 * config/ns32k/umax.mt: Obsolete.
2885 * config/ns32k/xm-umax.h: Obsolete.
2886 * umax-xdep.c: Obsolete.
2887 * config/ns32k/ns32km3.mh: Obsolete.
2888 * config/ns32k/ns32km3.mt: Obsolete.
2889 * config/ns32k/tm-ns32km3.h: Obsolete.
2890 * config/ns32k/xm-ns32km3.h: Obsolete.
2891 * ns32km3-nat.c: Obsolete.
2892 * ns32k-tdep.c (merlin_skip_prologue): Obsolete.
2893 (merlin_frame_num_args): Ditto.
2899 * config/djgpp/fnchange.lst: Tweak due to
2900 expect/example/chesslib.c.
2904 * m88k-tdep.c (examine_prologue): Change type of ``insn'' from
2905 unsigned int to unsigned long. Also, fix format string.
2906 (pop_frame): Fix PC_IN_CALL_DUMMY() call so that it doesn't
2907 use an undeclared variable. Also, delete declaration and
2908 initialization of ``fp'' because it is otherwise unused.
2909 * remote-bug.c (sleep): Delete declaration.
2910 (bug_store_register, bug_write_memory, bug_read_memory)
2911 (bug_insert_breakpoint, bug_remove_breakpoint): Fix sprintf()
2912 format statements and cast certain sprintf() arguments to
2914 (bug_load): Likewise for call to printf_filtered().
2915 * config/m88k/tm-m88k.h (FIX_CALL_DUMMY): Eliminate
2916 assignment to ``pc''. The necessary assignment is done in
2917 hand_function_call() after the invocation of FIX_CALL_DUMMY().
2921 * symtab.c (completion_list_add_name): Remove duplicate string checks,
2922 readline already does this, and it's much faster at it, too.
2926 * go32-nat.c: Minor tweaks, to pacify the ari script.
2930 * i386-tdep.c (i386_extract_struct_value_address): New function.
2931 * config/i386/tm-i386.h (EXTRACT_STRUCT_VALUE_ADDRESS): Redefine
2932 in terms of i386_extract_struct_value_address.
2933 (i386_extract_struct_value_address): New prototype.
2935 * i386-linux-nat.c (i386_linux_dr_get): Change type of return
2936 value to `unsigned long'. Change type of `value' to `unsigned
2938 (i386_linux_dr_set): Change type of second argument to `unsigned
2940 (i386_linux_dr_set_control): Change type of first argument to
2942 (i386_linux_dr_get_status): Change type of return value to
2944 * config/i386/nm-linux.h (i386_linux_dr_set_control,
2945 i386_linux_dr_get_status): Adjust prototypes accordingly.
2949 * ia64-linux-nat.c (ia64_linux_stopped_by_watchpoint): Change
2950 TRAP_HWBKPT constant to match that in the kernel headers for
2955 * i386bsd-nat.c: Include "gdb_assert.h".
2956 [HAVE_PT_GETDBREGS] (DBREG_DRX): Define if not
2958 [HAVE_PT_GETDBREGS] (i386bsd_dr_set, i386bsd_dr_set_control,
2959 i386bsd_dr_set_addr, i386bsd_dr_reset_addr,
2960 i386bsd_dr_get_status): New functions.
2961 * config/i386/nm-fbsd.h [HAVE_PT_GETDBREGS]
2962 (I386_USE_GENERIC_WATCHPOINTS): Define.
2963 Include "i386/nm-i386.h".
2964 (I386_DR_LOW_SET_CONTROL, I386_DR_LOW_SET_ADDR,
2965 I386_DR_LOW_RESET_ADDR, I386_DR_LOW_GET_STATUS): New macros.
2966 (i386bsd_dr_set_control, i386bsd_dr_set_addr,
2967 i386bsd_dr_reset_addr, i386bsd_dr_get_status): New prototypes.
2968 * acconfig.h (HAVE_PT_GETDBREGS): New configure macro.
2969 * configure.in: Cleanup a few comments. Check for PT_GETDBREGS
2971 * config.in, configure: Regenerate.
2973 * i386-nat.c (i386_insert_aligned_watchpoint): Set address
2974 register before enabling it by setting the control register.
2975 (i386_remove_aligned_watchpoint): Reset address register after
2976 disabling it by setting the control register.
2978 * i386-tdep.c (i386_extract_return_value): If the type of the
2979 return value is TYPE_STRUCT and the number of fields is one, call
2980 ourselves with TYPE set tp the type of the first field.
2981 (i386_store_return_value): Likewise.
2982 This fixes a problem with returning structs consisting of a single
2983 `float' or `double' on *BSD.
2987 * lin-lwp.c (lin_lwp_resume): Don't mark LWP as not stopped until
2988 we're absolutely sure we're going to resume it.
2990 * thread-db.c (check_event): Don't report an error if we encounter
2991 a thread creation event for a thread that's already in the thread
2992 list, since that may legitemately happen. Instead only call
2993 attach_thread if it's not already in the thread list.
2997 * config/pa/xm-hppah.h (malloc): Really delete declaration
2998 (MALLOC_INCOMPATIBLE): Really delete macro.
2999 * cli/cli-cmds.c (apropos_command): Use xcalloc.
3003 * configure.in (build_warnings): Add -Wuninitialized.
3004 * configure: Regenerate.
3006 * v850-tdep.c (v850_scan_prologue): Initialize ``insn2''.
3007 * sparc-tdep.c (sparc64_push_arguments): Add default case to
3009 * sh-tdep.c (sh_do_fp_register): Replace ``?:'' printf format
3010 expression with if statement.
3011 * mn10200-tdep.c (mn10200_analyze_prologue): Initialize
3013 * mips-tdep.c (show_mipsfpu_command): Add default case to switch.
3014 (mips_dump_tdep): Fix setting of ef_mips_arch.
3015 * mcore-tdep.c (mcore_analyze_prologue): Initialize ``fp_regnum''.
3016 * dsrec.c (make_srec): Always initialize ``binbuf''.
3017 * monitor.c (monitor_read_memory_single): Do not pass an
3018 uninitialized buffer to monitor_error. Make ``i'' more local.
3022 * MAINTAINERS: Change ns32k target to ,-Werror.
3024 * ns32k-tdep.c: Include "gdbcore.h"
3025 (flip_bytes): Change first argument to void*. Add forward
3027 (sign_extend): Add declaration.
3028 (merlin_frame_num_args): Add final else clause to if-else chain.
3029 (umax_frame_num_args): Ditto.
3030 * config/ns32k/tm-umax.h (ns32k_localcount): Declare.
3031 (flip_bytes): Ditto.
3035 * i386-linux-tdep.c (FRAMELESS_SIGNAL): Moved here from
3036 config/i386/nm-linux.h (including comment).
3037 (i386_linux_frame_chain): New function implementing guts of the
3038 former FRAME_CHAIN macro, but using read_memory_unsigned_integer
3039 instead of read_memory_integer.
3040 (i386_linux_frame_saved_pc): Removed doc pointing to
3041 i386/tm-linux.h for an explanation of FRAMELESS_SIGNAL since that
3042 now lives in this file.
3043 * config/i386/tm-linux.h (FRAMELESS_SIGNAL): Moved to
3044 i386-linux-tdep.c (including comment).
3045 (FRAME_CHAIN): Redefined in terms of i386_linux_frame_chain.
3046 (i386_linux_frame_chain): New prototype.
3048 * gdbserver/low-linux.c [I386_GNULINUX_TARGET]: Cleanup code and
3050 (NUM_FREGS): Redefine to 0.
3051 (NUM_REGS): Redefine as NUM_GREGS.
3052 (i386_register_byte, i386_register_raw_size): Update from
3053 i386-tdep.c. Add comment about their origin.
3054 (regmap, register_u_addr): Take these from i386-linux-nat.c.
3055 (i386_register_u_addr): Removed.
3057 * i386-linux-nat.c (i386_linux_dr_get): Return 0 if ptrace call
3058 fails instead of calling perror_with_name. This should fix
3059 debugging remote i386 targets with a native Linux/x86 GDB. Add
3060 FIXME for this hack.
3064 * arch-utils.c (#include "gdbthread.h"): Removed.
3065 (#include "symfile.h"): Removed.
3066 (XMALLOC): Removed unused macro.
3067 * breakpoint.c (tbreak_command): Removed local declaration.
3068 (awatch_command, do_enable_breakpoint, set_breakpoint_count):
3069 Remove duplicate declarations.
3070 (bpstat_should_step, bpstat_have_active_hw_watchpoints)
3071 (remove_solib_event_breakpoints): Fix indentation botch.
3072 * c-typeprint.c (#include "command.h"): Removed.
3073 (#include "gdbcmd.h"): Removed.
3074 * ch-exp.c (ch_terminal_match_float_literal, parse_expr)
3075 (parse_primval, parse_untyped_expr, parse_opt_untyped_expr):
3076 Removed duplicate declarations.
3077 * ch-typeprint.c (#include "command.h"): Removed.
3078 (#include "gdbcmd.h"): Removed.
3079 * corefile.c (#include "frame.h"): Removed
3080 (#include "symfile.h"): Removed.
3081 (#include "language.h"): Removed.
3082 * dbxread.c (#include "command.h"): Removed.
3083 * environ.c (#include "gdbcore.h"): Removed.
3084 * event-loop.c (#include "top.h"): Removed.
3085 * f-typeprint.c (#include "command.h"): Removed.
3086 (#include "gdbcmd.h"): Removed.
3087 (#include "language.h"): Removed.
3088 (#include "typeprint.h"): Removed.
3089 (#include "frame.h"): Removed.
3090 * gdbtypes.h (print_type_scalar): Removed declaration.
3091 * infcmd.c (#include "completer.h"): Removed.
3092 * language.c (#include "frame.h"): Removed.
3093 * m2-typeprint.c (#include "command.h"): Removed.
3094 (#include "gdbcmd.h"): Removed.
3095 (#include "language.h"): Removed.
3096 * m2-valprint.c (#include "valprint.h"): Removed.
3097 * p-typeprint.c (#include "command.h"): Removed.
3098 (#include "gdbcmd.h"): Removed.
3099 * p-valprint.c (#include "typeprint.h"): Removed.
3100 * parse.c (#include "linespec.h"): Removed.
3101 * regcache.c (#include "frame.h"): Removed.
3102 * remote.c (#include "frame.h"): Removed.
3103 (getpkt_sane): Make static.
3104 * source.c (#include "completer.h"): Removed.
3105 * stack.c (#include "symfile.h"): Removed.
3106 (#include "objfiles.h"): Removed.
3107 * symfile.c (#include "completer.h"): Removed.
3108 * tracepoint.c (#include "completer.h"): Removed.
3109 * values.c (#include "frame.h"): Removed.
3110 * varobj.c (#include "valprint.h"): Removed.
3111 * wrapper.c (#include "frame.h"): Removed.
3113 * memattr.c (create_mem_region): Removed unused variable.
3114 * remote-nrom.c: Removed spurious semicolon after init_nrom_ops.
3118 * remote-rdp.c (rdp_set_command_line): Add missing double quote.
3122 * solib-aix5.c (build_so_lib_from_mapfile): Use xfree() instead
3127 * TODO (Cleanups): Remove the item about converting docs to GFDL.
3131 * ia64-tdep.c (slotN_contents, replace_slotN_contents): Change
3132 type of ``bundle'' from unsigned char * to char *.
3133 (ia64_get_saved_register): Use alloca() to allocate register
3136 * solib-aix5.c (build_so_lib_from_mapfile): Fix xasprintf() usage.
3140 * proc-utils.h (procfs_ctl_t): New typedef.
3141 * proc-api.c (write_with_trace): Change type of ``opcode'' from
3142 long to procfs_ctl_t. Don't assume that the target has defined
3143 BREAKPOINT. Handle case in which PCRESET is the same as PCUNSET.
3144 * proc-events.c (sys/syscall.h, sys/fault.h): Include conditionally.
3145 * procfs.c (sys/fault.h, sys/syscall.h): Include conditionally.
3146 (gdb_sigset_t, gdb_sigaction_t, gdb_siginfo_t, gdb_premptysysset)
3147 (gdb_praddsysset, gdb_prdelsysset, gdb_pr_issyssetmember):
3148 Conditionally define as appropriate for AIX/non-AIX systems. Use
3149 these defines/typedefs as appropriate elsewhere in file.
3150 (struct procinfo): Change type of saved_sigset and saved_sighold
3151 from sigset_t to gdb_sigset_t. Make saved_exitset and
3152 saved_entryset pointer variables. Add two new fields, num_syscalls
3154 (DYNAMIC_SYSCALLS): Define when HAVE_PRSYSENT_T is defined.
3155 (sysset_t_size, sysset_t_alloc): New functions.
3156 (load_syscalls, free_syscalls, find_syscall): New functions for
3157 platforms which define DYNAMIC_SYSCALLS.
3158 (create_procinfo): Call load_syscalls.
3159 (destroy_one_procinfo): Call free_syscalls.
3160 (GDBRESET): Don't define twice.
3161 (proc_modify_flag): Change type of operation code array `arg'
3162 from long to procfs_ctl_t.
3163 (proc_stop_process, proc_wait_for_stop, proc_run_process)
3164 (proc_set_traced_signals, proc_set_traced_faults)
3165 (proc_set_traced_sysentry, proc_set_traced_sysexit)
3166 (proc_set_held_signals, proc_clear_current_fault)
3167 (proc_set_current_signal, proc_clear_current_signal, proc_set_gregs)
3168 (proc_set_fpregs, proc_kill, proc_set_watchpoint): Likewise for `cmd'.
3169 (proc_set_traced_sysentry): Dynamically allocate variable sized
3170 struct gdb_proc_ctl_pcsentry. Also, free it at function exit.
3171 (proc_set_traced_sysexit): Dynamically allocate variable
3172 sized struct gdb_proc_ctl_pcsexit. Also, free it at
3174 (proc_get_traced_sysentry, proc_get_traced_sysexit): Add new code
3175 for reading the sysset_t struct on AIX5.
3176 (procfs_debug_inferior): Don't assume that SYS_exit will be
3177 defined. Add new code for finding certain syscalls on AIX5.
3178 (syscall_is_lwp_exit, syscall_is_exit, syscall_is_exec)
3179 (syscall_is_lwp_create): New functions.
3180 (procfs_wait): Restructured code which checks for certain
3181 system calls to use the new syscall_is_... functions.
3182 (procfs_notice_signals): Account for the fact that saved_entryset
3183 and saved_exitset in struct procinfo are now pointers.
3187 * symtab.c (find_pc_sect_line): Revise method used for finding
3192 * i386-linux-tdep.c (i386_linux_sigtramp_saved_pc,
3193 i386_linux_sigtramp_saved_sp): Make static.
3194 (i386_linux_frame_saved_pc): New function based on the old
3195 FRAME_SAVED_PC macro, but use read_memory_unsigned_integer instead
3196 of read_memory_integer.
3197 * config/i386/tm-linux.h (sigtramp_saved_pc): Remove definition.
3198 (i386_linux_sigtramp_saved_pc): Remove prototype.
3199 (FRAME_SAVED_PC): Redefine in terms of i386_linux_frame_saved_pc.
3200 (i386_linux_frame_saved_pc): New prototype.
3204 * MAINTAINERS: Document m88k as a ``Known problem in 5.1''.
3205 * TODO (GDB 5.1 - Cleanups): Update.
3209 * fork-child.c (clone_and_follow_inferior): Delete #ifdef
3214 * config/i386/tm-symmetry.h (PUSH_ARGUMENTS): #undef.
3216 * i386-tdep.c (i386_push_arguments, i386_store_struct_return): New
3218 * config/i386/tm-i386.h (PUSH_ARGUMENTS): New macro.
3219 (STORE_STRUCT_RETURN): Redefine in terms of
3220 i386_store_struct_return.
3221 (i386_push_arguments, i386_store_struct_return): New prototypes.
3222 * config/i386/tm-i386v.h (STORE_STRUCT_RETURN): Remove. It's
3223 definition was identical to the definition in "i386/tm-i386.h" so
3224 the new definition should suffice too.
3228 * event-loop.c (toplevel) [!HAVE_POLL] [NO_FD_SET]: Remove unused
3229 definitions for SELECT, NBBY, FD_SETSIZE, NFDBITS, and MASK_SIZE.
3231 * config/djgpp/djconfig.sh: Add copyright notice.
3233 * ser-go32.c (rawclock): Remove prototype; include time.h instead.
3234 (ISR, dos_hookirq, isr_t): Convert K&R definition to ANSI C.
3235 (top level) <string.h>: Include gdb_string.h instead.
3236 (dos_noop, dos_raw, dos_noflush_set_tty_state)
3237 (dos_print_tty_state, dos_info): Remove ATTRIBUTE_UNUSED.
3239 * go32-nat.c (go32_create_inferior): Move the declaration of
3240 `environ' to here from the top level.
3241 (top level) <_initialize_go32_nat>: Remove redundant prototype.
3242 <gdb_string.h>: Include it instead of string.h.
3243 (store_register): Call register_buffer instead of accessing
3244 registers[] directly.
3245 (redir_cmdline_delete, redir_cmdline_parse, redir_to_debugger)
3246 (redir_to_debugger, redir_debug_init) [__DJGPP_MINOR__ < 3]: Put
3247 the function names at the start of the line.
3248 (go32_set_dr): Throw internal_error if the argument is not a valid
3249 debug register number.
3250 (go32_open, go32_close, go32_attach, go32_detach, go32_resume)
3251 (go32_wait, go32_xfer_memory, go32_files_info)
3252 (go32_terminal_info): Remove ATTRIBUTE_UNUSED.
3256 * mips-tdep.c (mips_gdbarch_init): Tweak indentation.
3262 * coffread.c: Include "gdb_assert.h".
3263 (coff_symtab_read): Cast the integer s_sclass to a long before
3264 casting it to a pointer.
3270 * coffread.c (coff_symtab_read): Initialize
3271 ``fcn_first_line_addr''. Check that the ``.bf'' always preceeds
3273 * dbxread.c (find_text_range): Initialize ``start'' and ``end''.
3277 * config/sparc/tm-sp64.h (GDB_MULTI_ARCH): Down grade to
3278 GDB_MULTI_ARCH_PARTIAL from two. SOFTWARE_SINGLE_STEP is not
3281 * gdbarch.sh (SOFTWARE_SINGLE_STEP): Add.
3282 * gdbarch.h, gdbarch.c: Re-generate.
3284 * target.h (SOFTWARE_SINGLE_STEP_P)
3285 (SOFTWARE_SINGLE_STEP): Delete macro definitions.
3289 * gdbarch.sh (gdbarch_register_read, gdbarch_register_write): Add.
3290 * gdbarch.h, gdbarch.c: Regenerate.
3292 * regcache.h (regcache_read, regcache_write): Declare.
3293 (registers, register_valid, register_buffer): Add note that these
3294 interfaces are deprecated.
3296 * regcache.c: Include "gdb_assert.h".
3297 (legacy_write_register_gen): Rename write_register_gen.
3298 (legacy_read_register_gen): Rename read_register_gen.
3299 (regcache_read, regcache_write): New function.
3300 (read_register_gen, write_register_gen): New function.
3301 (write_register): Simplify. Use write_register_gen.
3302 (read_register): Ditto using read_register_gen.
3303 (read_signed_register): Ditto.
3304 (read_register_bytes): Ditto!!!!
3305 (supply_register): Add note that CLEANUP_REGISTER_VALUE is being
3306 replaced by gdbarch_register_read.
3308 * TODO (GDB 5.2 - Cleanups): Add list of gdbarch methods to
3313 Fix from Dan Berlin:
3315 * stabsread.c (read_cpp_abbrev): Properly construct the names of
3316 virtual function table pointer fields.
3320 * defs.h (xfree, mcalloc, mmalloc, mrealloc, mfree, xmmalloc,
3321 xmrealloc): Move existing declarations to the one place and
3322 re-order to be consistent.
3323 (xmcalloc, xmfree): Declare.
3324 (xmmalloc, xmrealoc): Assume ISO-C - use size_t and void* in
3327 * utils.c (size_t): Delete #ifdef defining size_t.
3328 (mmalloc, mrealloc, mcalloc, mfree): Re-order.
3329 (mmalloc, mrealloc, mcalloc): Document as only calls in GDB
3330 corresponding malloc, realloc, calloc.
3331 (mfree): Call free directly.
3332 (xmmalloc, xmrealloc): Clean up. Assume ISO-C.
3333 (xmcalloc, xmfree): New functions. Copy old xcalloc and xfree
3334 function bodies to here.
3335 (xcalloc, xfree): Call xmcalloc and xmfree respectfully.
3339 * fork-child.c (fork_inferior): Make ``argv'', ``exec_file'' and
3340 ``shell_file'' static locals.
3342 * jv-lang.c (java_link_class_type): Initialize ``field'' and
3345 * jv-valprint.c (java_value_print): Initialize ``next_element''.
3349 * config/i386/nm-i386.h: Fix formatting and change reference to
3350 i386-tdep.c to i386-nat.c.
3354 * configure.in: Corrected spelling errors.
3355 * configure: Regenerated.
3359 * TODO (GDB 5.1 - Cleanups): Add more targets to obsolete.
3363 * Makefile.in (NTSSTART): Delete.
3365 (kdb): Delete target.
3366 * kdb-start.c, stuff.c: Mark as obsolete.
3371 * config/pa/xm-hppah.h (HPPA_COMPILER_BUG): Delete. GDB only
3372 compiles using an ISO-C compiler.
3373 (MALLOC_INCOMPATIBLE): Ditto.
3374 * linespec.c (decode_line_1): Delete hack to work around
3379 * exec.c (xfer_memory): Always initialize section.
3380 * infrun.c (normal_stop): Always initialize source_flag.
3384 * TODO (Remote Protocol Support): Review. Add notes about ``!'',
3385 non-use of a continue address and typical use of ``q'' packet.
3389 Make DJGPP use the new unified support for hardware
3390 breakpoints and watchpoints on x86 targets:
3392 * config/i386/nm-go32.h <top level>: Don't include nm-i386v.h,
3393 include nm-i386.h instead.
3394 (TARGET_HAS_HARDWARE_WATCHPOINTS, HAVE_CONTINUABLE_WATCHPOINT)
3395 (TARGET_CAN_USE_HARDWARE_WATCHPOINT, STOPPED_BY_WATCHPOINT)
3396 (TARGET_REGION_OK_FOR_HW_WATCHPOINT, DECR_PC_AFTER_HW_BREAK)
3397 (target_stopped_data_address, target_insert_watchpoint)
3398 (target_remove_watchpoint, target_insert_hw_breakpoint)
3399 (target_remove_hw_breakpoint): Don't define.
3400 (I386_USE_GENERIC_WATCHPOINTS, I386_DR_LOW_SET_CONTROL)
3401 (I386_DR_LOW_SET_ADDR, I386_DR_LOW_RESET_ADDR)
3402 (I386_DR_LOW_GET_STATUS): Define to call appropriate go32_*
3403 functions from go32-nat.c.
3405 * config/i386/go32.mh (NATDEPFILES): Add i386-nat.o.
3407 * go32-nat.c <top level>: Remove prototypes for watchpoint-
3408 related functions. Remove definitions of watchpoint-related
3410 (go32_mourn_inferior): Call i386_cleanup_dregs instead of the
3411 private cleanup_dregs function.
3412 (cleanup_dregs, go32_insert_watchpoint)
3413 (go32_insert_aligned_watchpoint, go32_handle_nonaligned_watchpoint)
3414 (go32_remove_watchpoint, go32_remove_aligned_watchpoint)
3415 (go32_region_ok_for_watchpoint, go32_stopped_by_watchpoint)
3416 (go32_remove_hw_breakpoint, go32_insert_hw_breakpoint): Remove.
3417 (go32_set_dr, go32_set_dr7, go32_get_dr6): New functions.
3421 * ia64-tdep.c (fetch_instruction): Warn about slot numbers greater
3422 than two instead of generating an error.
3426 * cp-valprint.c: Reformat to bring into line with GNU coding
3431 Make Linux use the new unified support for hardware breakpoints
3432 and watchpoints on x86 targets.
3433 * i386-linux-nat.c: Doc fixes. Include "gdb_assert.h".
3434 [HAVE_SYS_DEBUGREG_H]: Include <sys/debugreg.h>.
3435 (DR_FIRSTADDR, DR_LASTADDR, DR_STATUS, DR_CONTROL): Define to
3436 appropriate value if not already defined.
3437 (register_u_addr): New function.
3438 (kernel_u_size): New function.
3439 (i386_linux_dr_get, i386_linux_dr_set): New functions.
3440 (i386_linux_dr_set_control, i386_linux_dr_set_addr,
3441 i386_linux_reset_addr, i386_linux_dr_get_status): New functions.
3442 * config/i386/nm-linux.h: Don't include "nm-i386v.h".
3443 (I386_USE_GENERIC_WATCHPOINTS): Define and include "nm-i386.h".
3444 (TARGET_HAS_HARDWARE_WATCHPOINTS,
3445 TARGET_CAN_USE_HARDWARE_WATCHPOINTS, HAVE_CONTINUABLE_WATCHPOINT,
3446 STOPPED_BY_WATCHPOINT, target_insert_watchpoint,
3447 target_remove_watchpoint): Remove macros.
3448 (i386_stopped_by_watchpoint, i386_insert_watchpoint,
3449 i386_remove_watchpoint): Remove prototypes.
3450 (register_u_addr): New prototype.
3451 (REGISTER_U_ADDR): Define in terms of register_u_addr.
3452 (i386_linux_dr_set_control, i386_linux_dr_set_addr,
3453 i386_linux_reset_addr, i386_linux_dr_get_status): New prototypes.
3454 (I386_DR_LOW_SET_CONTROL, I386_DR_LOW_SET_ADDR,
3455 I386_DR_LOW_RESET_ADDR, I386_DR_LOW_GET_STATUS): New macros.
3456 * config/i386/linux.mh (NATDEPFILES): Replace i386v-nat.o with
3461 Fix from Dan Berlin:
3463 * linespec.c (find_methods): Whitespace differences aren't
3464 significant in *un*mangled method names. Use strcmp_iw to compare
3469 * gdbarch.sh: Allow a non- multi-arch target to override a
3471 * gdbarch.h: Regenerate.
3475 * gdbarch.sh: Avoid use of ``!''.
3479 * target.h (enum target_signal): Move definition from here.
3480 * defs.h (enum target_signal): To here.
3482 * config/arc/tm-arc.h (arc_software_single_step): Change type of
3483 first parameter to enum target_signal.
3484 * config/rs6000/tm-rs6000.h (rs6000_software_single_step): Ditto.
3485 * config/sparc/tm-sparc.h (sparc_software_single_step): Ditto.
3486 * rs6000-tdep.c (rs6000_software_single_step): Update.
3490 * frame.h (SIZEOF_FRAME_SAVED_REGS): Report an error if macro
3494 * stabsread.c (define_symbol): A parameter ('R'), a local ('r'),
3495 or a reference ('a') can be in a pseudo register.
3496 * infcmd.c (do_registers_info): Must take into account the pseudo
3497 registers to print their value.
3498 (registers_info): Likewise.
3499 * stack.c (frame_info): Likewise.
3500 * frame.h (SIZEOF_FRAME_SAVED_REGS): Save the pseudo registers.
3504 Unified support for hardware breakpoints and watchpoints on
3507 * config/i386/nm-i386.h: New file.
3509 * config/i386/nm-i386.h: (i386_cleanup_dregs)
3510 (i386_insert_watchpoint, i386_remove_watchpoint)
3511 (i386_region_ok_for_watchpoint, i386_stopped_by_hwbp)
3512 (i386_stopped_data_address, i386_insert_hw_breakpoint)
3513 (i386_remove_hw_breakpoint): Declare prototypes.
3514 [I386_USE_GENERIC_WATCHPOINTS] (TARGET_CAN_USE_HARDWARE_WATCHPOINT):
3515 Define if not already defined.
3516 (TARGET_REGION_OK_FOR_HW_WATCHPOINT, HAVE_CONTINUABLE_WATCHPOINT)
3517 (STOPPED_BY_WATCHPOINT, target_stopped_data_address)
3518 (target_insert_watchpoint, target_remove_watchpoint)
3519 (target_insert_hw_breakpoint, target_remove_hw_breakpoint): Define
3520 to call the appropriate i386_* functions.
3522 * i386-nat.c: New file.
3524 * i386-nat.c (I386_DR_CONTROL_MASK, I386_DR_LOCAL_ENABLE)
3525 (I386_DR_GLOBAL_ENABLE, I386_DR_DISABLE, I386_DR_SET_RW_LEN)
3526 (I386_DR_GET_RW_LEN, I386_DR_WATCH_HIT): New macros.
3527 (dr_mirror, dr_status_mirror, dr_control_mirror, dr_ref_count)
3528 (maint_show_dr): New variables.
3529 (i386_cleanup_dregs, i386_show_dr, i386_length_and_rw_bits)
3530 (i386_insert_aligned_watchpoint, i386_remove_aligned_watchpoint)
3531 (i386_handle_nonaligned_watchpoint, i386_insert_watchpoint)
3532 (i386_remove_watchpoint, i386_region_ok_for_watchpoint)
3533 (i386_stopped_data_address, i386_stopped_by_hwbp)
3534 (i386_insert_hw_breakpoint, i386_remove_hw_breakpoint): New
3536 (_initialize_i386_nat): New function.
3537 [I386_USE_GENERIC_WATCHPOINTS]: Add new maint command
3538 `show-debug-regs', sets maint_show_dr to non-zero value and
3539 activates debugging print-outs in functions which insert, remove,
3540 and test watchpoints and hardware breakpoints.
3542 * Makefile.in (i386-nat.o): New target.
3543 (ALLDEPFILES): Add i386-nat.o.
3547 * i386-tdep.c: Add back _initialize_i386_tdep prototype with
3548 appropriate comment.
3552 * config/alpha/alpha-linux.mh (NATDEPFILES): Use proc-service.o,
3553 thread-db.o, and lin-lwp.o for thread support instead of
3554 linux-thread.o and lin-thread.o.
3555 * config/alpha/nm-linux.h (PREPARE_TO_PROCEED, GET_THREAD_SIGNALS)
3556 (ATTACH_LWP): Define to use the following lin-lwp.c functions...
3557 (lin_lwp_prepare_to_proceed, lin_thread_get_thread_signals)
3558 (lin_lwp_attach_lwp): Declare.
3562 Fix from Dan Berlin:
3564 * Makefile.in: Clean up dependencies on ../include/demangle.h.
3565 (demangle_h): New variable.
3566 (jv-typeprint.o, jv-valprint.o, linespec.o): Use it.
3570 * target.h (SOFTWARE_SINGLE_STEP_P): Add empty parameter list.
3571 * breakpoint.c (bpstat_stop_status): Update.
3572 * infrun.c (handle_inferior_event): Ditto.
3573 * mips-tdep.c (mips_dump_tdep): Ditto.
3574 * infrun.c (resume): Ditto.
3575 * infptrace.c (child_resume): Ditto.
3576 * config/mips/tm-wince.h (SOFTWARE_SINGLE_STEP_P): Ditto.
3577 * config/sh/tm-wince.h (SOFTWARE_SINGLE_STEP_P): Ditto.
3578 * config/sparc/tm-sparc.h (SOFTWARE_SINGLE_STEP_P): Ditto.
3579 * config/powerpc/tm-linux.h (SOFTWARE_SINGLE_STEP_P): Ditto.
3580 * config/arm/tm-wince.h (SOFTWARE_SINGLE_STEP_P): Ditto.
3581 * config/arc/tm-arc.h (SOFTWARE_SINGLE_STEP_P): Ditto.
3582 * config/powerpc/tm-ppc-eabi.h (SOFTWARE_SINGLE_STEP_P): Ditto.
3586 * config/powerpc/tm-linux.h (SOFTWARE_SINGLE_STEP): Replace abort
3587 with internal_error.
3591 Fix from Dan Berlin:
3593 * linespec.c (find_methods): Just call CHECK_TYPEDEF on t, rather
3594 than asking for sym_class's type; that's circuitous. Remove
3595 sym_class, since the last use of it is gone.
3599 * breakpoint.c (print_it_typical) <bp_access_watchpoint> [UI_OUT]:
3600 Correct the order of calls to ui_out_field_string and
3601 ui_out_list_begin when bs->old_val is NULL.
3605 * configure.in (AC_CHECK_HEADERS): Check for existence of nlist.h.
3606 * configure: Regenerate.
3607 * config.in: Regenerate.
3608 * solib-legacy.c (nlist.h): Include if HAVE_NLIST_H is defined.
3612 * config/i386/i386v42mp.mh (NATDEPFILES): List all files on
3613 same line to avoid problems with Unixware 7's make when building
3618 * defs.h (malloc): Move declaration from here.
3619 * utils.c (malloc): To here.
3620 * config/pa/xm-hppah.h (malloc): Delete declaration.
3622 * gnu-nat.c (make_proc): Use xmalloc instead of malloc.
3623 * hp-psymtab-read.c (hpread_call_pxdb): Ditto.
3624 (hpread_quick_traverse): Ditto.
3625 * infttrace.c (create_thread_info): Ditto.
3626 (kill_inferior): Ditto.
3627 * gnu-nat.c (make_inf): Ditto, and don't check return value.
3628 * procfs.c (proc_update_threads): Ditto.
3629 * valprint.c (print_decimal_chars): Ditto.
3630 * gdbtypes.c (cfront_mangle_name): Use xasprintf instead of
3632 * remote-rdp.c (rdp_set_command_line): Ditto.
3636 * defs.h (realloc): Move declaration from here.
3637 * utils.c (realloc): To here.
3638 * config/pa/xm-hppah.h (realloc): Delete declaration.
3639 * lin-thread.c (insert_thread): Use xrealloc instead of realloc.
3640 * symfile.c (add_filename_language): Ditto.
3641 * event-loop.c (create_file_handler): Ditto.
3645 * defs.h (free): Move declaration from here.
3646 * utils.c (free): To here.
3647 (xfree): Document as the only call to free().
3648 * config/pa/xm-hppah.h (free): Delete declaration.
3652 * config/ia64/linux.mh (NATDEPFILES): Add proc-service.o to
3657 * eval.c (evaluate_subexp): Remove #ifdef __STDC__ and ``inline''.
3658 * config/mips/xm-mips.h (offsetof): Define when !GNUC not !STDC.
3659 * cli/cli-cmds.c (init_cli_cmds): Remove #ifdef __STDC__
3663 * TODO: List known problems with TUI.
3667 * MAINTAINERS: Jimmy Guo stepped down as a maintiner (TUI,
3672 * remote.c (remote_cisco_section_offsets): Do not cast result from
3673 bfd_get_section_name.
3674 (compare_sections_command): Ditto.
3675 (remote_cisco_section_offsets): Make ``p'' a const pointer.
3676 (compare_sections_command): Ditto for ``sectname''.
3681 * valops.c (hand_function_call): Simplify computation of the
3682 address of the pushed argument.
3686 * p-exp.y (parse_number): Avoid shift overflow when ``long''.
3687 Code copied from c-exp.y.
3691 * acconfig.h (HAVE_STRUCT_LINK_MAP_WITH_L_MEMBERS)
3692 (HAVE_STRUCT_LINK_MAP_WITH_LM_MEMBERS)
3693 (HAVE_STRUCT_SO_MAP_WITH_SOM_MEMBERS): New configure macros.
3694 * configure.in (HAVE_STRUCT_LINK_MAP32): Move this test out
3695 of the Solaris procfs testing section. Instead, group with...
3696 (HAVE_STRUCT_LINK_MAP_WITH_L_MEMBERS)
3697 (HAVE_STRUCT_LINK_MAP_WITH_LM_MEMBERS)
3698 (HAVE_STRUCT_SO_MAP_WITH_SOM_MEMBERS): New <link.h> tests.
3699 * configure: Regenerate.
3700 * config.in: Regenerate.
3702 * solib-legacy.c (legacy_svr4_fetch_link_map_offsets): Use
3703 new configure macros to choose which (if any) code to
3704 compile in. Added code to explicitly handle *BSD systems;
3705 these systems were previously handled only through macro
3706 redefinition. Also, due to the way the autoconf tests are set
3707 up, this function will no longer return a non-zero value when
3708 GDB is configured as a cross debugger. I.e, cross debuggers
3709 will no longer be able to "accidentally" get the host system's
3714 * config/i386/nbsd.mh (NATDEPFILES): List all files on the same
3715 line to avoid build problem on NetBSD 1.4.
3719 * win32-nat.c (child_attach): check args for NULL before passing
3720 to strtoul. This fixes PR gdb/43.
3724 * i387-nat.h: Doc Fix.
3726 * i386-tdep.c: Fix formatting.
3727 (i386_get_frame_setup, i386_follow_jump, codestream_read,
3728 codestream_seek, codestream_fill, skip_trampoline_code,
3729 gdb_print_insn_i386, _initialize_i386_tdep): Remove redundant
3734 * config/i386/tm-linux.h (TARGET_ANALYZE_FLOATING): Remove. It's
3735 no longer used. Also remove associated FIXME.
3739 * gdbarch.sh: Add classes ``m'' and ``M'' for pure multi-arch. Do
3740 not generate macro wrappers for multi-arch functions or
3742 (class_is_info_p, class_is_predicate_p): Update.
3743 (class_is_function_p, class_is_variable_p): Ditto.
3744 (class_is_multiarch_p): New class function.
3748 * config/h8300/tm-h8300.h (FRAME_ARGS_ADDRESS): Changed to use
3749 h8300_frame_args_address from frame_args_address.
3750 (FRAME_LOCALS_ADDRESS): Changed to use h8300_frame_locals_address
3751 from frame_locals_address.
3752 (PRINT_REGISTER_HOOK): Changed to use h8300_print_register_hook
3753 from print_register_hook.
3754 (h8300_frame_args_address): Declare.
3755 (h8300_frame_find_saved_regs): Declare.
3756 (h8300_frame_locals_address): Declare.
3757 (h8300_frame_saved_pc): Declare.
3758 (h8300_pop_frame): Declare.
3759 (h8300_print_register_hook): Declare.
3760 * h8300-tdep.c (h8300_frame_find_saved_regs): Removed declaration.
3761 (h8300_frame_args_address): Renamed from frame_args_address.
3762 (h8300_frame_locals_address): Renamed from frame_locals_address.
3763 (h8300_pop_frame): Renamed from pop_frame.
3764 (h8300_print_register_hook): Renamed from print_register_hook.
3768 * solib-svr4.c (bfd_lookup_symbol): Change type of
3769 ``storage_needed'' from unsigned int to long in order to
3770 match return type of bfd_get_symtab_upper_bound() and
3771 bfd_get_dynamic_symtab_upper_bound().
3772 * solib-aix5.c (bfd_lookup_symbol): Likewise. Also, eliminate
3773 REASONABLE_LIMIT hack which had been added to work around this
3778 * solib-aix5.c (bfd_lookup_symbol, build_so_list_from_mapfile)
3779 (aix5_relocate_main_executable, aix5_clear_solib): Replace calls
3780 to free() with calls to xfree().
3781 (bfd_lookup_symbol): Eliminate use of PTR.
3782 (build_so_list_from_mapfile): Use xasprintf() instead of sprintf().
3786 * linespec.c (decode_line_1): Remove trailing quote
3787 when parsing double quotes.
3791 * uw-thread.c (read_thr_debug, read_map, read_lwp, thread_iter)
3792 (libthread_stub, libthread_init): Pass NULL for the mem_attrib
3793 argument in the to_xfer_memory calls.
3797 * MAINTAINERS: Fix typo - w65 not w64. Still doesn't build.
3798 * TODO (GDB 5.1 - Cleanups): Add status of targets being obsoleted.
3802 * wince.c (child_xfer_memory): Add attrib parameter.
3803 * symm-nat.c (child_xfer_memory): Ditto.
3804 * mac-nat.c (child_xfer_memory): Ditto.
3805 * infttrace.c (child_xfer_memory): Ditto.
3806 * procfs.c (procfs_xfer_memory): Ditto.
3807 * lin-thread.c (thread_db_xfer_memory): Ditto.
3808 * gnu-nat.c (gnu_xfer_memory): Ditto.
3812 * NEWS: Mention that Harris/CXUX m88k is obsolete.
3816 * config/mips/tm-mips.h: Include "regcache.h" for macros refering
3817 to regcache functions.
3818 * config/m68k/tm-m68k.h: Ditto.
3819 * config/i386/tm-i386v.h: Ditto.
3820 * config/mcore/tm-mcore.h: Ditto.
3821 * config/m88k/tm-m88k.h: Ditto.
3822 * config/m68k/tm-news.h: Ditto.
3823 * config/m68k/tm-linux.h: Ditto.
3824 * config/m68k/tm-delta68.h: Ditto.
3825 * config/m68k/nm-sun3.h: Ditto.
3826 * config/m32r/tm-m32r.h: Ditto.
3827 * config/i386/tm-symmetry.h: Ditto.
3828 * config/i386/tm-sun386.h: Ditto.
3829 * config/i386/tm-i386.h: Ditto.
3830 * config/i386/nm-symmetry.h: Ditto.
3831 * config/i386/nm-sun386.h: Ditto.
3832 * config/i386/nm-ptx4.h: Ditto.
3833 * config/i386/nm-i386mach.h: Ditto.
3834 * config/h8500/tm-h8500.h: Ditto.
3835 * config/h8300/tm-h8300.h: Ditto.
3836 * config/fr30/tm-fr30.h: Ditto.
3837 * config/d30v/tm-d30v.h: Ditto.
3838 * config/arm/tm-arm.h: Ditto.
3839 * config/arc/tm-arc.h: Ditto.
3840 * config/alpha/tm-alpha.h: Ditto.
3841 * config/a29k/tm-vx29k.h: Ditto.
3842 * config/a29k/tm-a29k.h: Ditto.
3843 * config/w65/tm-w65.h: Ditto.
3844 * config/vax/tm-vax.h: Ditto.
3845 * config/v850/tm-v850.h: Ditto.
3846 * config/tic80/tm-tic80.h: Ditto.
3847 * config/sparc/tm-sparclite.h: Ditto.
3848 * config/sparc/tm-sparclet.h: Ditto.
3849 * config/sparc/tm-sparc.h: Ditto.
3850 * config/sparc/nm-sun4sol2.h: Ditto.
3851 * config/sparc/nm-sun4os4.h: Ditto.
3852 * config/sparc/nm-nbsd.h: Ditto.
3853 * config/powerpc/nm-solaris.h: Ditto.
3854 * config/pa/tm-hppao.h: Ditto.
3855 * config/pa/tm-hppa.h: Ditto.
3856 * config/pa/nm-hppab.h: Ditto.
3857 * config/ns32k/tm-umax.h: Ditto.
3858 * config/ns32k/tm-merlin.h: Ditto.
3859 * config/nm-m3.h: Ditto.
3860 * config/nm-gnu.h: Ditto.
3864 * MAINTAINERS: Update list of targets. Mark arm-* and v850-elf as
3865 broken. Mark sh-*, ia64-linux and ns32k-netbsd as buildable.
3866 Specify an m88k target. Include sample GAWK script to generate
3867 target list. Delete non-existant romp target.
3868 * TODO (GDB 5.1 - Cleanups): Update.
3872 * linespec.c (decode_line_1): Skip argptr over a leading
3873 double quote. Prevents alloc of 0 bytes and memcpy of -1 bytes.
3877 * config/djgpp/fnchange.lst (ia64-aix-nat.c): Add entry.
3881 * ui-out.h: Remove #if __STDC__, assume an ISO-C compiler.
3884 * printcmd.c (printf_command): Ditto.
3885 * ch-exp.c (match_integer_literal): Ditto.
3886 * scm-tags.h: Ditto.
3887 * ser-go32.c: Ditto.
3888 * hppa-tdep.c (unwind_command): Ditto.
3889 * defs.h (volatile): Delete macro definition. Assume __STDC__.
3890 * remote-adapt.c (volatile): Ditto.
3891 * remote-eb.c (volatile): Ditto.
3892 * remote-mm.c (volatile): Ditto.
3893 * defs.h (alloca): Assume __STDC__, declare returning void *.
3897 * inferior.h (ARCH_NUM_REGS): Delete definition.
3898 * stack.c (frame_info): Use NUM_REGS, not ARCH_NUM_REGS.
3899 * regcache.c (registers_changed): Ditto.
3900 (registers_fetched): Ditto.
3901 * infptrace.c (fetch_inferior_registers): Ditto.
3902 (store_inferior_registers): Ditto.
3903 * infcmd.c (do_registers_info): Ditto.
3904 (registers_info): Ditto.
3905 * i386-linux-nat.c (old_fetch_inferior_registers): Ditto.
3906 (old_store_inferior_registers): Ditto.
3907 * gdbserver/low-linux.c (register_addr): Ditto.
3908 * gdbserver/low-hppabsd.c (register_addr): Ditto.
3909 * core-aout.c: Don't include "inferior.h".
3910 (fetch_core_registers): Use NUM_REGS not ARCH_NUM_REGS.
3911 (register_addr): Ditto.
3916 * cli/cli-script.c (define_command): Fix setting of post hooks.
3920 * i386-linux-tdep.c: Fix formatting and clarify comments.
3921 (i386_linux_svr4_fetch_link_map_offsets): Use NULL instead of 0
3926 * gnu-nat.c: Include "gdb_assert.h" instead of <assert.h>.
3927 (proc_update_sc): Use gdb_assert instead of assert.
3928 (proc_abort): Ditto.
3929 (inf_set_step_thread): Ditto.
3931 (S_exception_raise_request): Ditto.
3932 (gnu_terminal_init_inferior): Ditto.
3936 * Makefile.in (solib-svr4.o): Depend on solib-svr4.c, not solib.c.
3937 (solib-legacy.o): New makefile target.
3938 * solib-legacy.c: New file.
3939 * solib-svr4.h (SVR4_FETCH_LINK_MAP_OFFSETS): Delete.
3940 (default_svr4_fetch_link_map_offsets): Delete.
3941 (set_solib_svr4_fetch_link_map_offsets): Declare.
3942 (legacy_svr4_fetch_link_map_offsets_hook): Declare.
3943 * solib-svr4.c (elf/common.h): Include.
3944 (link.h): Only include for SunOS shared library support.
3945 (_SYSCALL32): Don't define.
3946 (SVR4_FETCH_LINK_MAP_OFFSETS): Define.
3947 (default_svr4_fetch_link_map_offsets): Made static; added forward
3949 (fetch_link_map_offsets): New static global.
3950 (legacy_svr4_fetch_link_map_offsets_hook): New global variable.
3951 (default_svr4_fetch_link_map_offsets): Rewritten. The guts
3952 of what used to be in this function now reside in
3953 legacy_svr4_fetch_link_map_offsets() in solib-legacy.c.
3954 (open_symbol_file_object): Fix declaration in SunOS section
3956 (set_solib_svr4_fetch_link_map_offsets): New extern function.
3957 (init_fetch_link_map_offsets): New static function.
3958 (_initialize_svr4_solib): Put static global fetch_link_map_offsets
3959 under multiarch control.
3961 * config/alpha/alpha-linux.mt (TDEPFILES): Add solib-legacy.o to
3963 * config/alpha/fbsd.mh (NATDEPFILES): Likewise.
3964 * config/arm/linux.mt (TDEPFILES): Likewise.
3965 * config/i386/fbsd.mh (NATDEPFILES): Likewise.
3966 * config/i386/i386dgux.mh (NATDEPFILES): Likewise.
3967 * config/i386/i386gnu.mh (NATDEPFILES): Likewise.
3968 * config/i386/i386sco5.mh (NATDEPFILES): Likewise.
3969 * config/i386/i386sol2.mt (TDEPFILES): Likewise.
3970 * config/i386/i386v4.mh (NATDEPFILES): Likewise.
3971 * config/i386/i386v42mp.mh (NATDEPFILES): Likewise.
3972 * config/i386/linux.mt (TDEPFILES): Likewise.
3973 * config/i386/nbsd.mh (NATDEPFILES): Likewise.
3974 * config/i386/nbsdelf.mh (NATDEPFILES): Likewise.
3975 * config/i386/ncr3000.mt (TDEPFILES): Likewise.
3976 * config/i386/ptx4.mh (XDEPFILES): Likewise.
3977 * config/i386/sun386.mt (TDEPFILES): Likewise.
3978 * config/ia64/linux.mt (TDEPFILES): Likewise.
3979 * config/m68k/linux.mt (TDEPFILES): Likewise.
3980 * config/m68k/m68kv4.mh (NATDEPFILES): Likewise.
3981 * config/m68k/nbsd.mh (NATDEPFILES): Likewise.
3982 * config/m68k/sun2os4.mt (TDEPFILES): Likewise.
3983 * config/m68k/sun3os4.mt (TDEPFILES): Likewise.
3984 * config/m88k/delta88v4.mh (NATDEPFILES): Likewise.
3985 * config/mips/mipsv4.mh (NATDEPFILES): Likewise.
3986 * config/ns32k/nbsd.mh (NATDEPFILES): Likewise.
3987 * config/powerpc/linux.mt (TDEPFILES): Likewise.
3988 * config/powerpc/nbsd.mh (NATDEPFILES): Likewise.
3989 * config/powerpc/solaris.mh (NATDEPFILES): Likewise.
3990 * config/sh/linux.mt (TDEPFILES): Likewise.
3991 * config/sparc/linux.mt (TDEPFILES): Likewise.
3992 * config/sparc/nbsd.mh (NATDEPFILES): Likewise.
3993 * config/sparc/nbsdelf.mh (NATDEPFILES): Likewise.
3994 * config/sparc/sp64linux.mt (TDEPFILES): Likewise.
3995 * config/sparc/sun4os4.mt (TDEPFILES): Likewise.
3996 * config/sparc/sun4sol2.mh (NATDEPFILES): Likewise.
4000 * utils.c (xmrealloc, xcalloc): Return NULL for zero-sized requests.
4004 * MAINTAINERS (Write After Approval): Update Philip Blundell.
4008 * MAINTAINERS: Add myself to write after approval list.
4012 * i387-tdep.c (print_i387_status_word): Fix printing of Stack
4013 fault flag. It is bit 6 of the x87 FPU status word, not bit 7.
4017 * configure.host (m88*-harris-cxux*): Mark as obsolete.
4018 * configure.tgt: Ditto.
4019 * config/m88k/xm-cxux.h: Ditto.
4020 * config/m88k/tm-cxux.h: Ditto.
4021 * config/m88k/nm-cxux.h: Ditto.
4022 * config/m88k/cxux.mt: Ditto.
4023 * config/m88k/cxux.mh: Ditto.
4027 * Makefile.in: Delete rules for obsolete files.
4031 * stack.c (parse_frame_specification): For one argument case,
4032 handle the situation where the argument is an integer, not an
4033 address -- arguably the most common case. This matters on
4034 targets where pointers and addresses are different.
4038 * TODO: Revise 5.1 list. Delete PARAMS task. Add coding standard
4039 review. Clarify GNU/LINUX/sparc. Move other tasks to 5.2 or
4044 * TODO (GDB 5.1 Known Problems): Document problem of building GDB
4045 with SID on Solaris 8.
4049 * defs.h: Provide prototypes for floatformat_is_negative,
4050 floatformat_is_nan and floatformat_mantissa.
4051 * utils.c: Include "gdb_assert.h".
4052 (floatformat_is_negative): New function.
4053 (floatformat_is_nan): New function.
4054 (floatformat_mantissa): New function.
4055 * valprint.c: Include "floatformat.h".
4056 (print_floating): Get rid of the Linux-specific
4057 TARGET_ANALYZE_FLOATING macro and rewrite NaN detection with the
4058 help these new functions. Print NaN's in a format conforming to
4063 * top.c (init_main): Make `set history file name' complete on file
4068 * Makefile.in (LINTFLAGS): Update to contain all of the macros
4069 which define include paths used when compiling.
4071 * util.c (savestring, msavestring): Change type of length argument.
4072 * defs.h (savestring, msavestring): Update to match.
4074 * symtab.h (decode_line_1): Removed declaration.
4076 * symfile.c (#include <assert.h>): Removed.
4078 * arch-utils.c (#include <ctype.h>): Removed.
4079 * c-typeprint.c: Likewise.
4080 * dbxread.c: Likewise.
4081 * gdbtypes.c: Likewise.
4082 * target.c: Likewise.
4083 * os9kread.c: Likewise.
4085 * c-valprint.c (#include "demangle.h"): Removed.
4086 * ch-typeprint.c: Likewise.
4088 * f-typeprint.c: Likewise.
4089 * f-valprint.c: Likewise.
4090 * m2-typeprint.c: Likewise.
4091 * typeprint.c: Likewise.
4092 * p-typeprint.c: Likewise.
4093 * valarith.c: Likewise.
4094 * valprint.c: Likewise.
4096 * m2-typeprint.c (#include "gdb_string.h"): Removed.
4097 * nlmread.c: Likewise.
4099 * mdebugread.c (#include "gdb-stabs.h"): Removed.
4100 * minsyms.c: Likewise.
4101 * mipsread.c: Likewise.
4102 * nlmread.c: Likewise.
4104 * m2-typeprint.c (#include "obstack.h"): Removed.
4105 * m2-valprint.c: Likewise.
4107 * event-loop.c (#include <setjmp.h>): Removed.
4111 * MAINTAINERS: Remove self from specific maintenance domains
4112 (macos, gdbserver, documentation, testsuite).
4116 * 29k-share/udi/udip2soc.c, Makefile.in, a29k-tdep.c,
4117 a68v-nat.c, abug-rom.c, aclocal.m4, alpha-nat.c, alpha-tdep.c,
4118 annotate.c, annotate.h, arc-tdep.c, arch-utils.c,
4119 arch-utils.h, arm-tdep.c, ax-gdb.c, ax-gdb.h, ax-general.c,
4120 ax.h, bcache.c, bcache.h, blockframe.c, breakpoint.c,
4121 breakpoint.h, buildsym.c, buildsym.h, c-exp.y, c-lang.c,
4122 c-lang.h, c-typeprint.c, c-valprint.c, call-cmds.h, ch-exp.c,
4123 ch-lang.c, ch-lang.h, ch-typeprint.c, ch-valprint.c,
4124 cli/cli-cmds.h, cli/cli-decode.c, cli/cli-decode.h,
4125 cli/cli-script.c, cli/cli-script.h, cli/cli-setshow.h,
4126 cli/cli-utils.h, cli-out.c, cli-out.h, coff-solib.c,
4127 coff-solib.h, coffread.c, command.h, complaints.c,
4128 complaints.h, completer.c, completer.h,
4129 config/a29k/nm-ultra3.h, config/a29k/tm-a29k.h,
4130 config/a29k/tm-ultra3.h, config/a29k/tm-vx29k.h,
4131 config/a29k/xm-ultra3.h, config/alpha/nm-fbsd.h,
4132 config/alpha/nm-linux.h, config/alpha/nm-osf.h,
4133 config/alpha/nm-osf2.h, config/alpha/nm-osf3.h,
4134 config/alpha/tm-alpha.h, config/alpha/tm-alphalinux.h,
4135 config/alpha/xm-alphalinux.h, config/alpha/xm-alphaosf.h,
4136 config/alpha/xm-fbsd.h, config/arc/tm-arc.h,
4137 config/arm/nm-linux.h, config/arm/tm-arm.h,
4138 config/arm/tm-embed.h, config/d10v/tm-d10v.h,
4139 config/d30v/tm-d30v.h, config/fr30/tm-fr30.h,
4140 config/h8300/tm-h8300.h, config/h8500/tm-h8500.h,
4141 config/i386/nm-fbsd.h, config/i386/nm-gnu.h,
4142 config/i386/nm-i386bsd.h, config/i386/nm-i386mach.h,
4143 config/i386/nm-i386sco.h, config/i386/nm-i386sol2.h,
4144 config/i386/nm-i386v.h, config/i386/nm-i386v4.h,
4145 config/i386/nm-i386v42mp.h, config/i386/nm-linux.h,
4146 config/i386/nm-nbsd.h, config/i386/nm-nbsdelf.h,
4147 config/i386/nm-ptx4.h, config/i386/nm-sun386.h,
4148 config/i386/nm-symmetry.h, config/i386/tm-cygwin.h,
4149 config/i386/tm-fbsd.h, config/i386/tm-i386.h,
4150 config/i386/tm-i386aix.h, config/i386/tm-i386bsd.h,
4151 config/i386/tm-i386gnu.h, config/i386/tm-i386lynx.h,
4152 config/i386/tm-i386m3.h, config/i386/tm-i386mk.h,
4153 config/i386/tm-i386nw.h, config/i386/tm-i386os9k.h,
4154 config/i386/tm-i386sco5.h, config/i386/tm-i386sol2.h,
4155 config/i386/tm-i386v.h, config/i386/tm-i386v4.h,
4156 config/i386/tm-i386v42mp.h, config/i386/tm-linux.h,
4157 config/i386/tm-nbsd.h, config/i386/tm-ptx.h,
4158 config/i386/tm-ptx4.h, config/i386/tm-sun386.h,
4159 config/i386/tm-symmetry.h, config/i386/tm-vxworks.h,
4160 config/i386/xm-fbsd.h, config/i386/xm-i386bsd.h,
4161 config/i386/xm-i386gnu.h, config/i386/xm-i386m3.h,
4162 config/i386/xm-i386mach.h, config/i386/xm-i386mk.h,
4163 config/i386/xm-i386sco.h, config/i386/xm-i386v4.h,
4164 config/i386/xm-linux.h, config/i386/xm-nbsd.h,
4165 config/i386/xm-ptx.h, config/i386/xm-ptx4.h,
4166 config/i386/xm-sun386.h, config/i386/xm-symmetry.h,
4167 config/i960/tm-i960.h, config/i960/tm-mon960.h,
4168 config/i960/tm-nindy960.h, config/i960/tm-vx960.h,
4169 config/ia64/nm-aix.h, config/ia64/nm-linux.h,
4170 config/ia64/tm-aix.h, config/ia64/tm-ia64.h,
4171 config/ia64/tm-linux.h, config/ia64/xm-aix.h,
4172 config/ia64/xm-linux.h, config/m68k/nm-apollo68b.h,
4173 config/m68k/nm-delta68.h, config/m68k/nm-dpx2.h,
4174 config/m68k/nm-hp300bsd.h, config/m68k/nm-hp300hpux.h,
4175 config/m68k/nm-linux.h, config/m68k/nm-sun3.h,
4176 config/m68k/tm-apollo68b.h, config/m68k/tm-cisco.h,
4177 config/m68k/tm-dpx2.h, config/m68k/tm-es1800.h,
4178 config/m68k/tm-hp300bsd.h, config/m68k/tm-hp300hpux.h,
4179 config/m68k/tm-isi.h, config/m68k/tm-linux.h,
4180 config/m68k/tm-m68k.h, config/m68k/tm-m68kv4.h,
4181 config/m68k/tm-mac.h, config/m68k/tm-monitor.h,
4182 config/m68k/tm-nbsd.h, config/m68k/tm-news.h,
4183 config/m68k/tm-os68k.h, config/m68k/tm-sun3.h,
4184 config/m68k/tm-vx68.h, config/m68k/xm-3b1.h,
4185 config/m68k/xm-apollo68b.h, config/m68k/xm-dpx2.h,
4186 config/m68k/xm-hp300bsd.h, config/m68k/xm-hp300hpux.h,
4187 config/m68k/xm-linux.h, config/m68k/xm-m68kv4.h,
4188 config/m68k/xm-mpw.h, config/m68k/xm-news.h,
4189 config/m68k/xm-sun2.h, config/m68k/xm-sun3.h,
4190 config/m68k/xm-sun3os4.h, config/m88k/nm-delta88v4.h,
4191 config/m88k/tm-delta88.h, config/m88k/tm-delta88v4.h,
4192 config/m88k/tm-m88k.h, config/m88k/xm-cxux.h,
4193 config/m88k/xm-delta88.h, config/m88k/xm-delta88v4.h,
4194 config/m88k/xm-dgux.h, config/mcore/tm-mcore.h,
4195 config/mips/nm-irix3.h, config/mips/nm-irix4.h,
4196 config/mips/nm-irix5.h, config/mips/nm-mips.h,
4197 config/mips/nm-news-mips.h, config/mips/tm-bigmips.h,
4198 config/mips/tm-embed.h, config/mips/tm-embed64.h,
4199 config/mips/tm-embedl.h, config/mips/tm-embedl64.h,
4200 config/mips/tm-irix3.h, config/mips/tm-irix5.h,
4201 config/mips/tm-mips.h, config/mips/tm-mips64.h,
4202 config/mips/tm-mipsm3.h, config/mips/tm-mipsv4.h,
4203 config/mips/tm-tx39.h, config/mips/tm-tx39l.h,
4204 config/mips/tm-vr4100.h, config/mips/tm-vr4300.h,
4205 config/mips/tm-vr4300el.h, config/mips/tm-vr4xxx.h,
4206 config/mips/tm-vr4xxxel.h, config/mips/tm-vr5000.h,
4207 config/mips/tm-vr5000el.h, config/mips/xm-irix3.h,
4208 config/mips/xm-irix4.h, config/mips/xm-irix5.h,
4209 config/mips/xm-mips.h, config/mips/xm-mipsm3.h,
4210 config/mips/xm-mipsv4.h, config/mips/xm-news-mips.h,
4211 config/mips/xm-riscos.h, config/mn10200/tm-mn10200.h,
4212 config/mn10300/tm-mn10300.h, config/nm-gnu.h,
4213 config/nm-linux.h, config/nm-lynx.h, config/nm-m3.h,
4214 config/nm-sysv4.h, config/none/nm-none.h,
4215 config/none/tm-none.h, config/none/xm-none.h,
4216 config/ns32k/nm-nbsd.h, config/ns32k/nm-umax.h,
4217 config/ns32k/tm-merlin.h, config/ns32k/tm-nbsd.h,
4218 config/ns32k/tm-ns32km3.h, config/ns32k/tm-umax.h,
4219 config/ns32k/xm-merlin.h, config/ns32k/xm-ns32km3.h,
4220 config/pa/nm-hppab.h, config/pa/nm-hppah.h,
4221 config/pa/nm-hppao.h, config/pa/tm-hppa.h,
4222 config/pa/tm-hppa64.h, config/pa/tm-hppah.h,
4223 config/pa/xm-hppab.h, config/pa/xm-hppah.h,
4224 config/powerpc/nm-aix.h, config/powerpc/nm-linux.h,
4225 config/powerpc/nm-macos.h, config/powerpc/nm-nbsd.h,
4226 config/powerpc/tm-cygwin.h, config/powerpc/tm-linux.h,
4227 config/powerpc/tm-macos.h, config/powerpc/tm-ppc-aix.h,
4228 config/powerpc/tm-ppc-eabi.h, config/powerpc/tm-ppc-nw.h,
4229 config/powerpc/tm-ppcle-eabi.h, config/powerpc/tm-solaris.h,
4230 config/powerpc/xm-aix.h, config/powerpc/xm-linux.h,
4231 config/powerpc/xm-mpw.h, config/rs6000/nm-rs6000.h,
4232 config/rs6000/tm-rs6000.h, config/rs6000/tm-rs6000ly.h,
4233 config/rs6000/xm-aix4.h, config/rs6000/xm-rs6000.h,
4234 config/sh/tm-linux.h, config/sh/tm-sh.h, config/sh/tm-wince.h,
4235 config/sparc/nm-linux.h, config/sparc/nm-nbsd.h,
4236 config/sparc/nm-nbsdelf.h, config/sparc/nm-sparclynx.h,
4237 config/sparc/nm-sun4os4.h, config/sparc/nm-sun4sol2.h,
4238 config/sparc/tm-linux.h, config/sparc/tm-sp64.h,
4239 config/sparc/tm-sp64sim.h, config/sparc/tm-sparc.h,
4240 config/sparc/tm-sparclet.h, config/sparc/tm-sparclite.h,
4241 config/sparc/tm-sparclynx.h, config/sparc/tm-spc-em.h,
4242 config/sparc/tm-sun4os4.h, config/sparc/tm-sun4sol2.h,
4243 config/sparc/xm-sun4os4.h, config/sparc/xm-sun4sol2.h,
4244 config/tic80/tm-tic80.h, config/tm-linux.h, config/tm-lynx.h,
4245 config/tm-sysv4.h, config/v850/tm-v850.h, config/vax/tm-vax.h,
4246 config/w65/tm-w65.h, config/xm-aix4.h, config/xm-lynx.h,
4247 config/xm-mpw.h, config/xm-nbsd.h, config/xm-sysv4.h,
4248 config/z8k/tm-z8k.h, configure.in, core-aout.c, core-regset.c,
4249 core-sol2.c, corefile.c, corelow.c, cp-valprint.c,
4250 cpu32bug-rom.c, cxux-nat.c, d10v-tdep.c, d30v-tdep.c,
4251 dbug-rom.c, dbxread.c, dcache.c, dcache.h, defs.h,
4252 delta68-nat.c, demangle.c, dink32-rom.c, dpx2-nat.c, dsrec.c,
4253 dstread.c, dve3900-rom.c, dwarf2read.c, dwarfread.c,
4254 elfread.c, environ.c, environ.h, eval.c, event-loop.c,
4255 event-loop.h, event-top.c, exec.c, expprint.c, f-exp.y,
4256 f-lang.c, f-lang.h, f-typeprint.c, f-valprint.c, findvar.c,
4257 fork-child.c, fr30-tdep.c, frame.c, frame.h, gdb-events.c,
4258 gdb-events.h, gdb-events.sh, gdb-stabs.h, gdb.1, gdb_string.h,
4259 gdb_thread_db.h, gdbcmd.h, gdbcore.h, gdbserver/Makefile.in,
4260 gdbserver/gdbreplay.c, gdbserver/gdbserver.1,
4261 gdbserver/low-hppabsd.c, gdbserver/low-linux.c,
4262 gdbserver/low-lynx.c, gdbserver/low-nbsd.c,
4263 gdbserver/low-sim.c, gdbserver/low-sparc.c,
4264 gdbserver/low-sun3.c, gdbserver/remote-utils.c,
4265 gdbserver/server.c, gdbserver/server.h, gdbserver/utils.c,
4266 gdbthread.h, gdbtypes.c, gdbtypes.h, gnu-nat.c, gnu-nat.h,
4267 gnu-regex.c, gnu-regex.h, h8300-tdep.c, h8500-tdep.c,
4268 hp-psymtab-read.c, hp-symtab-read.c, hp300ux-nat.c,
4269 hppa-tdep.c, hppab-nat.c, hppah-nat.c, hppam3-nat.c, hpread.c,
4270 hpread.h, hpux-thread.c, i386-tdep.c, i386aix-nat.c,
4271 i386b-nat.c, i386gnu-nat.c, i386ly-tdep.c, i386m3-nat.c,
4272 i386mach-nat.c, i386nbsd-nat.c, i386nbsd-tdep.c, i386v-nat.c,
4273 i386v4-nat.c, i387-tdep.c, i960-tdep.c, infcmd.c, inferior.h,
4274 inflow.c, infptrace.c, infrun.c, inftarg.c, infttrace.c,
4275 irix4-nat.c, irix5-nat.c, isi-xdep.c, jv-exp.y, jv-lang.c,
4276 jv-lang.h, jv-typeprint.c, jv-valprint.c, kdb-start.c,
4277 kod-cisco.c, kod.c, language.c, language.h, lin-thread.c,
4278 linespec.c, linespec.h, linux-thread.c, lynx-nat.c, m2-exp.y,
4279 m2-lang.c, m2-lang.h, m2-typeprint.c, m2-valprint.c, m3-nat.c,
4280 m32r-rom.c, m32r-tdep.c, m68k-tdep.c, m68klinux-nat.c,
4281 m68knbsd-nat.c, m88k-nat.c, m88k-tdep.c, mac-nat.c,
4282 mac-xdep.c, main.c, maint.c, mcore-rom.c, mcore-tdep.c,
4283 mdebugread.c, mem-break.c, minimon.h, minsyms.c, mips-nat.c,
4284 mips-tdep.c, mipsm3-nat.c, mipsread.c, mipsv4-nat.c,
4285 mn10200-tdep.c, mn10300-tdep.c, mon960-rom.c, monitor.c,
4286 monitor.h, news-xdep.c, nindy-share/env.h, nindy-tdep.c,
4287 nlm/Makefile.in, nlmread.c, ns32k-tdep.c, ns32km3-nat.c,
4288 ns32knbsd-nat.c, objfiles.c, objfiles.h, ocd.c, ocd.h,
4289 op50-rom.c, os9kread.c, osfsolib.c, p-exp.y, pa64solib.c,
4290 pa64solib.h, parse.c, parser-defs.h, partial-stab.h,
4291 ppc-bdm.c, ppc-linux-nat.c, ppc-linux-tdep.c, ppcbug-rom.c,
4292 ppcnbsd-nat.c, printcmd.c, proc-api.c, proc-events.c,
4293 proc-flags.c, proc-utils.h, proc-why.c, procfs.c, ptx4-nat.c,
4294 rdi-share/Makefile.in, rdi-share/aclocal.m4, regcache.c,
4295 regcache.h, remote-adapt.c, remote-array.c, remote-bug.c,
4296 remote-e7000.c, remote-eb.c, remote-es.c, remote-est.c,
4297 remote-hms.c, remote-mips.c, remote-mm.c, remote-nindy.c,
4298 remote-nrom.c, remote-os9k.c, remote-rdi.c, remote-rdp.c,
4299 remote-sds.c, remote-sim.c, remote-st.c, remote-udi.c,
4300 remote-utils.c, remote-utils.h, remote-vx.c, remote.c,
4301 remote.h, reply_mig_hack.awk, rom68k-rom.c, rs6000-nat.c,
4302 rs6000-tdep.c, scm-exp.c, scm-lang.c, scm-lang.h, scm-tags.h,
4303 scm-valprint.c, ser-e7kpc.c, ser-mac.c, ser-ocd.c, ser-pipe.c,
4304 ser-tcp.c, ser-unix.c, serial.c, serial.h, sh-tdep.c,
4305 sh3-rom.c, sol-thread.c, solib-aix5.c, solib-svr4.c, solib.c,
4306 solib.h, solist.h, somread.c, somsolib.c, somsolib.h,
4307 source.c, sparc-nat.c, sparc-tdep.c, sparcl-tdep.c,
4308 sparclet-rom.c, srec.h, stabsread.c, stabsread.h, stack.c,
4309 standalone.c, stop-gdb.c, stuff.c, sun3-nat.c, sun386-nat.c,
4310 symfile.c, symfile.h, symm-nat.c, symm-tdep.c, symmisc.c,
4311 symtab.c, symtab.h, target.c, target.h, terminal.h, thread.c,
4312 tic80-tdep.c, top.c, top.h, tracepoint.c, tracepoint.h,
4313 typeprint.c, ui-file.c, ui-file.h, ui-out.h, ultra3-nat.c,
4314 ultra3-xdep.c, umax-xdep.c, utils.c, v850-tdep.c, v850ice.c,
4315 valarith.c, valops.c, valprint.c, value.h, values.c, varobj.h,
4316 vax-tdep.c, version.h, vx-share/vxWorks.h, vx-share/xdr_ld.c,
4317 vx-share/xdr_ptrace.c, vx-share/xdr_ptrace.h,
4318 vx-share/xdr_rdb.c, w65-tdep.c, w89k-rom.c, win32-nat.c,
4319 wrapper.c, wrapper.h, xcoffread.c, xcoffsolib.c, xcoffsolib.h,
4320 xmodem.c, xmodem.h, z8k-tdep.c: Update/correct copyright
4325 * acconfig.h (HAVE_PRSYSENT_T, HAVE_PR_SIGSET_T,
4326 HAVE_PR_SIGACTION64_T, HAVE_PR_SIGINFO64_T): New configure
4328 * configure.in (prsysent_t, pr_sigset_t, pr_sigaction64_t,
4329 pr_siginfo64_t): Test for these typedefs in <sys/procfs.h>.
4330 (sys/fault.h, sys/select.h): Test for presence of these
4332 (ia64-*-aix*): Define NEW_PROC_API for this host.
4333 * configure: Regenerate.
4334 * config.in: Regenerate.
4336 * configure.host (ia64-*-aix*): New host.
4337 * configure.tgt (ia64-*-aix*): New target.
4341 * TODO (GDB 5.1 Known Problems): Document z8k as broken.
4345 * wince.c: Change realloc to xrealloc throughout.
4346 (handle_load_dll): Use void * rather than PTR in argument.
4350 * ocd.h (ocd_xfer_memory): Add ``attrib'' parameter.
4351 * ocd.c (ocd_xfer_memory): Ditto.
4352 * ser-ocd.c (ocd_setstopbits): New function. Add to ocd_ops.
4353 * MAINTAINERS: Document powerpc-eabi and powerpcle-eabi as
4354 buildable with ,-Werror.
4356 * Makefile.in (symfile_h): Define.
4357 (mcore-tdep.o): Add $(symfile_h), $(gdbcore_h) and $(inferior_h).
4358 * mcore-tdep.c: Include "symfile.h", "gdbcore.h" and "inferior.h".
4359 * MAINTAINERS: Document mcore-elf and mcore-pe as buildable with
4362 * dsrec.c (make_srec): Fix internal_error fmt arg.
4363 * MAINTAINERS: Document i960-coff as buildable with ,-Werror.
4367 * solib-aix5.c (aix5_relocate_main_executable): Don't use ANOFFSET
4372 * MAINTAINERS (paper trail): Update.
4374 * CONTRIBUTE: Update note on ``Fix PR gdb/4706'' convention.
4379 * mn10200-tdep.c (mn10200_frame_chain): Pass 0 for ``pc''
4380 parameter to mn10200_analyze_prologue.
4382 * config/mn10200/tm-mn10200.h: Include "regcache.h".
4383 * MAINTAINERS: Document that mn10200-elf target is buildable.
4387 * config/ia64/xm-aix.h (GDB_GREGSET_T, GDB_FPREGSET_T): Move defines
4389 * config/ia64/nm-aix.h (GDB_GREGSET_T, GDB_FPREGSET_T): ...to here.
4390 (MONTEREY): Don't define.
4395 * config/mn10300/tm-mn10300.h (E0_REGNUM): Correct to 15.
4399 * sparc-nat.c (sparc-nat.c): Don't include self.
4403 * defs.h (__CYGWIN__): Moved conditional which defines __CYGWIN__
4404 if __CYGWIN32__ is set from here.
4405 * config/i386/xm-cygwin.h: To here.
4406 * config/powerpc/xm-cygwin.h: To here.
4408 * i386-stub.c (handle_exception): Use 'T' response packet.
4412 * m32r-tdep.c: Fix cut and paste error in comment.
4416 * symtab.c (print_msymbol_info): Print addresses by portable method
4417 longest_local_hex_string_custom. Allow for 64-bit addresses.
4421 * gdbtypes.h (builtin_type_f_integer): Removed duplicate declaration.
4422 (MAX_OF_TYPE): Wrap macro definition in parenthesis.
4423 (MIN_OF_TYPE): Likewise.
4425 * memattr.h (mem_access_mode): Removed extraneous trailing comma.
4429 * Makefile.in (os9kread.o): Do not compile with WERROR_CFLAGS.
4430 * os9kread.c (os9k_process_one_symbol): Add assert to detect
4431 ``loses if sizeof (char *) > sizeof (int)''.
4435 * gdb_assert.h: Document pragmatics behind gdb_assert's case.
4439 * Makefile.in (gdbtk-cmds.o): Add $(regcache_h) to dependency
4445 * Makefile.in (regcache_h): Define. Add $(regcache_h) to
4450 * printcmd.c (print_address_numeric): Update comments to refer
4451 to sizeof addr, not sizeof pointer.
4452 (x_command): Remove needless whitespace (shorten long line).
4454 * breakpoint.c (print_one_breakpoint): Formatting clean-up.
4455 (read_memory_nobpt): Ditto.
4456 (ep_is_catchpoint): Ditto.
4457 (ep_is_shlib_catchpoint): Ditto.
4458 (ep_is_exception_catchpoint): Ditto.
4459 (describe_other_breakpoints): Ditto.
4463 * regcache.h (register_valid): Fix comment documenting valid
4468 From Steven Johnson:
4469 * regcache.h: New file.
4471 * value.h (read_register_bytes, read_register_gen)
4472 (write_register_gen, write_register_bytes)
4473 (read_register, read_register_pid)
4474 (read_signed_register, read_signed_register_pid)
4475 (write_register, write_register_pid)
4476 (register_cached, set_register_cached)
4477 (register_changed, register_buffer)
4478 (registers_changed, supply_register): Move declaration from here.
4479 * regcache.h: To here.
4480 * gdbcore.h (registers_fetched): Ditto.
4481 * inferior.h (registers, registers_valid): Ditto.
4483 * regcache.c (generic_target_read_pc, read_pc_pid, read_pc,
4484 generic_target_write_pc, write_pc_pid, write_pc,
4485 generic_target_read_sp, read_sp, generic_target_write_sp,
4486 write_sp, generic_target_read_fp, read_fp,
4487 generic_target_write_fp, write_fp): Add note that these functions
4488 will be moved from this file.
4490 * a29k-tdep.c: Include "regcache.h".
4491 * a68v-nat.c: Ditto.
4492 * abug-rom.c: Ditto.
4493 * alpha-nat.c: Ditto.
4494 * alpha-tdep.c: Ditto.
4495 * alphabsd-nat.c: Ditto.
4496 * arc-tdep.c: Ditto.
4497 * arm-linux-nat.c: Ditto.
4498 * arm-linux-tdep.c: Ditto.
4499 * arm-tdep.c: Ditto.
4500 * blockframe.c: Ditto.
4501 * core-aout.c: Ditto.
4502 * core-sol2.c: Ditto.
4504 * cpu32bug-rom.c: Ditto.
4505 * cxux-nat.c: Ditto.
4506 * d10v-tdep.c: Ditto.
4507 * d30v-tdep.c: Ditto.
4508 * dbug-rom.c: Ditto.
4509 * dink32-rom.c: Ditto.
4510 * dve3900-rom.c: Ditto.
4512 * fr30-tdep.c: Ditto.
4514 * go32-nat.c: Ditto.
4515 * h8300-tdep.c: Ditto.
4516 * h8500-tdep.c: Ditto.
4517 * hp300ux-nat.c: Ditto.
4518 * hppa-tdep.c: Ditto.
4519 * hppab-nat.c: Ditto.
4520 * hppah-nat.c: Ditto.
4521 * hppam3-nat.c: Ditto.
4522 * hpux-thread.c: Ditto.
4523 * i386-linux-nat.c: Ditto.
4524 * i386-linux-tdep.c: Ditto.
4525 * i386-tdep.c: Ditto.
4526 * i386aix-nat.c: Ditto.
4527 * i386b-nat.c: Ditto.
4528 * i386bsd-nat.c: Ditto.
4529 * i386gnu-nat.c: Ditto.
4530 * i386ly-tdep.c: Ditto.
4531 * i386m3-nat.c: Ditto.
4532 * i386mach-nat.c: Ditto.
4533 * i386nbsd-nat.c: Ditto.
4534 * i386v4-nat.c: Ditto.
4535 * i387-nat.c: Ditto.
4536 * i387-tdep.c: Ditto.
4537 * i960-tdep.c: Ditto.
4538 * ia64-aix-nat.c: Ditto.
4539 * ia64-linux-nat.c: Ditto.
4540 * ia64-tdep.c: Ditto.
4541 * infptrace.c: Ditto.
4543 * irix4-nat.c: Ditto.
4544 * irix5-nat.c: Ditto.
4546 * lin-thread.c: Ditto.
4547 * lynx-nat.c: Ditto.
4549 * m32r-rom.c: Ditto.
4550 * m32r-tdep.c: Ditto.
4551 * m68hc11-tdep.c: Ditto.
4552 * m68k-tdep.c: Ditto.
4553 * m68klinux-nat.c: Ditto.
4554 * m68knbsd-nat.c: Ditto.
4555 * m68knbsd-tdep.c: Ditto.
4556 * m88k-nat.c: Ditto.
4557 * m88k-tdep.c: Ditto.
4559 * mcore-rom.c: Ditto.
4560 * mcore-tdep.c: Ditto.
4561 * mi/mi-main.c: Ditto.
4562 * mips-nat.c: Ditto.
4563 * mips-tdep.c: Ditto.
4564 * mipsm3-nat.c: Ditto.
4565 * mipsv4-nat.c: Ditto.
4566 * mn10200-tdep.c: Ditto.
4567 * mn10300-tdep.c: Ditto.
4569 * ns32km3-nat.c: Ditto.
4570 * ns32knbsd-nat.c: Ditto.
4572 * pa64solib.c: Ditto.
4574 * ppc-linux-nat.c: Ditto.
4575 * ppc-linux-tdep.c: Ditto.
4576 * ppcbug-rom.c: Ditto.
4577 * ppcnbsd-nat.c: Ditto.
4578 * ptx4-nat.c: Ditto.
4579 * regcache.c: Ditto.
4580 * remote-adapt.c: Ditto.
4581 * remote-array.c: Ditto.
4582 * remote-bug.c: Ditto.
4583 * remote-e7000.c: Ditto.
4584 * remote-eb.c: Ditto.
4585 * remote-es.c: Ditto.
4586 * remote-est.c: Ditto.
4587 * remote-hms.c: Ditto.
4588 * remote-mips.c: Ditto.
4589 * remote-mm.c: Ditto.
4590 * remote-nindy.c: Ditto.
4591 * remote-os9k.c: Ditto.
4592 * remote-rdi.c: Ditto.
4593 * remote-rdp.c: Ditto.
4594 * remote-sds.c: Ditto.
4595 * remote-sim.c: Ditto.
4596 * remote-st.c: Ditto.
4597 * remote-udi.c: Ditto.
4598 * remote-utils.c: Ditto.
4599 * remote-vx.c: Ditto.
4600 * remote-vx29k.c: Ditto.
4601 * remote-vx68.c: Ditto.
4602 * remote-vx960.c: Ditto.
4603 * remote-vxmips.c: Ditto.
4604 * remote-vxsparc.c: Ditto.
4606 * rom68k-rom.c: Ditto.
4607 * rs6000-nat.c: Ditto.
4608 * rs6000-tdep.c: Ditto.
4611 * sol-thread.c: Ditto.
4612 * solib-svr4.c: Ditto.
4613 * somsolib.c: Ditto.
4614 * sparc-nat.c: Ditto.
4615 * sparc-tdep.c: Ditto.
4616 * sparcl-tdep.c: Ditto.
4617 * sparclet-rom.c: Ditto.
4618 * sun3-nat.c: Ditto.
4619 * sun386-nat.c: Ditto.
4620 * symm-nat.c: Ditto.
4622 * thread-db.c: Ditto.
4624 * tic80-tdep.c: Ditto.
4625 * tracepoint.c: Ditto.
4626 * ultra3-nat.c: Ditto.
4627 * umax-xdep.c: Ditto.
4628 * uw-thread.c: Ditto.
4629 * v850-tdep.c: Ditto.
4632 * w65-tdep.c: Ditto.
4633 * w89k-rom.c: Ditto.
4634 * win32-nat.c: Ditto.
4636 * z8k-tdep.c: Ditto.
4640 * MAINTAINERS: Add Matt Hiller to Write After Approval list.
4644 * mn10300-tdep.c (mn10300_stab_reg_to_regnum): New function.
4645 (mn10300_gdbarch_init): Set appropriate elements of gdbarch to
4646 mn10300_stab_reg_to_regnum.
4650 * symtab.c (search_symbols): Fix off by one error in test for
4655 * config/sparc/sp64linux.mt: New file.
4656 * configure.tgt: Recognize sparc64-*-linux* as a sp64linux target.
4657 * configure.host: Recognize sparc64-*-linux* as a linux host.
4660 * config/sparc/tm-sp64linux.h: New file.
4664 * buildsym.c (push_subfile, pop_subfile): Replace call to abort()
4665 with call to internal_error().
4666 * dbxread.c (process_one_symbol): Likewise.
4667 * exec.c (build_section_table, xfer_memory): Likewise.
4668 * h8500-tdep.c (h8500_register_size, h8500_register_virtual_type):
4670 * hpread.c (hpread_type_translate, hpread_read_array_type)
4671 (hpread_type_lookup): Likewise.
4672 * i386-tdep.c (gdb_print_insn_i386): Likewise.
4673 * i960-tdep.c (mem): Likewise
4674 * inflow.c (set_sigio_trap, clear_sigio_trap): Likewise.
4675 * infptrace.c (child_resume): Likewise.
4676 * infttrace.c (_initialize_infttrace): Likewise.
4677 * language.c (binop_result_type, add_language): Likewise.
4678 * lynx-nat.c (store_inferior_registers): Likewise.
4679 * m3-nat.c (port_chain_insert, m3_trace_me): Likewise.
4680 * mdebugread.c (parse_partial_symbols): Likewise.
4681 * monitor.c (monitor_printf_noecho, monitor_printf)
4682 (monitor_dump_regs): Likewise.
4683 * ocd.c (stu_put_packet): Likewise.
4684 * printcmd.c (decode_format, print_scalar_formatted): Likewise.
4685 * remote-bug.c (bug_open): Likewise.
4686 * remote-e7000.c (fetch_regs_from_dump, e7000_wait): Likewise.
4687 * remote-es.c (es1800_read_bytes): Likewise.
4688 * remote-mips.c (common_breakpoint): Likewise.
4689 * remote-rdp.c (send_rdp): Likewise.
4690 * remote-sds.c (putmessage): Likewise.
4691 * sparc-nat.c (fetch_inferior_registers, store_inferior_registers):
4693 * sparcl-tdep.c (sparclite_download): Likewise.
4694 * symtab.c (lookup_partial_symbol): Likewise.
4695 * target.c (push_target, pop_target, initialize_targets): Likewise.
4696 * utils.c (internal_verror, malloc_botch, wrap_here, decimal2str):
4698 * valprint.c (print_decimal, print_longest, print_longest)
4699 (strcat_longest): Likewise.
4700 * w65-tdep.c (init_frame_pc, w65_push_dummy_frame): Likewise.
4701 * xmodem.c (xmodem_send_packet): Likewise.
4702 * z8k-tdep.c (init_frame_pc, z8k_push_dummy_frame): Likewise.
4703 * config/h8500/tm-h8500.h (STORE_STRUCT_RETURN): Likewise.
4704 * config/mn10200/tm-mn10200.h (EXTRACT_RETURN_VALUE)
4705 (STORE_RETURN_VALUE): Likewise.
4706 * config/ns32k/nm-umax.h (REGISTER_U_ADDR): Likewise.
4707 * config/ns32k/xm-merlin.h (REGISTER_U_ADDR): Likewise.
4708 * config/z8k/tm-z8k.h (STORE_STRUCT_RETURN, STORE_RETURN_VALUE):
4713 * CONTRIBUTE: Document how to cite a problem report.
4714 * TODO: Note need to replace CONTRIBUTE with generated file.
4716 * CONTRIBUTE: Mention that patches do not need to include the
4717 generated files gdbarch.h and gdbarch.c.
4721 * value.h (get_saved_register): Move from here.
4726 * solib.h (in_svr4_dynsym_resolve_code): Delete declaration.
4727 (in_solib_dynsym_resolve_code): Add declaration.
4728 (IN_SOLIB_DYNSYM_RESOLVE_CODE): Changed define to invoke
4729 in_solib_dynsym_resolve_code() rather than
4730 in_svr4_dynsym_resolve_code(). Also, removed the ifdefs
4731 which caused this macro to only be defined when
4732 SVR4_SHARED_LIBS is defined.
4733 * solib.c (in_solib_dynsym_resolve_code): New function.
4734 * solist.h (struct target_so_ops): Add new member
4735 in_dynsym_resolve_code.
4736 * solib-aix5.c (aix5_in_dynsym_resolve_code): Renamed from
4737 in_svr4_dynsym_resolve_code. Also, made static.
4738 (_initialize_aix5_solib): Initialize in_dynsym_resolve_code
4739 member in aix5_so_ops.
4740 * solib-svr4.c (svr4_in_dynsym_resolve_code): Renamed from
4741 in_svr4_dynsym_resolve_code. Also, added second version
4742 of this function which will be used when SVR4_SHARED_LIBS
4744 (_initialize_svr4_solib): Initialize in_dynsym_resolve_code
4745 member in svr4_so_ops.
4747 * ia64-aix-nat.c, ia64-aix-tdep.c, config/ia64/aix.mh,
4748 config/ia64/aix.mt, config/ia64/nm-aix.h, config/ia64/tm-aix.h,
4749 config/ia64/xm-aix.h: New files.
4750 * ia64-tdep.c (_initialize_ia64_tdep): Remove declaration.
4751 (ia64_aix_sigcontext_register_address): New declaration.
4752 (ia64_gdbarch_init): Provide for initialization of
4753 sigcontext_register_address member of struct tdep when
4754 on target is detected to be running AIX.
4755 * config/ia64/linux.mt (TDEPFILES): Add ia64-aix-tdep.o to
4760 * ia64-tdep.c (ia64_frameless_function_invocation): Implement.
4761 * config/ia64/linux.mh (NATDEPFILES): Use thread-db.o and lin-lwp.o
4762 for thread support instead of linux-thread.o and lin-thread.o.
4763 * config/ia64/nm-linux.h (PREPARE_TO_PROCEED, GET_THREAD_SIGNALS,
4764 ATTACH_LWP): Define to use the following lin-lwp.c functions...
4765 (lin_lwp_prepare_to_proceed, lin_thread_get_thread_signals,
4766 lin_lwp_attach_lwp): Declare.
4770 * mips-tdep.c (do_fp_register_row, do_fp_register_row): Fix printf
4775 * solib-aix5.c (solib-svr4.h): Remove include.
4776 (solib_break_names): Delete names which aren't actually
4778 (bkpt_names): Remove.
4779 (aix5_relocate_main_executable, bfd_lookup_symbol): Replace calls
4780 to STREQ() with equivalent calls to strcmp().
4781 (in_svr4_dynsym_resolve_code, enable_break, bfd_lookup_symbol,
4782 aix5_solib_create_inferior_hook): Revise comments.
4783 (enable_break): Remove old ``bkpt_names'' code.
4787 * Makefile.in (SFILES): Add frame.c .
4788 (COMMON_OBS): Add frame.o .
4789 (frame.o): New target.
4791 * frame.c (find_saved_register):
4792 (default_get_saved_register):
4793 (get_saved_register):
4794 (read_relative_register_raw_bytes_for_frame):
4795 (read_relative_register_raw_bytes): Moved to here.
4796 * regcache.c: From here.
4800 * solib-aix5.c: New file.
4804 * solib.c (info_sharedlibrary_command): Don't assume pointers
4805 are the same size of long, call longest_local_hex_string_custom().
4807 * solib-svr4.c (LM_ADDR): LM_ADDR is a signed offset, so
4808 extract_signed_integer() should be called instead of
4813 * MAINTAINERS: Add Martin Hunt to Write After Approval list.
4818 * mips-tdep.c (mips_register_raw_size): If FP_REGISTER_DOUBLE,
4819 then floating point registers are 8 bytes.
4823 * parse.c (write_exp_msymbol): Make the type CORE_ADDR, to
4824 accomodate 64-bit addresses.
4829 * symtab.c (lookup_symbol_aux): Call lookup_symbol_aux, not
4830 lookup_symbol, when trying to find a symbol with a mangled name,
4831 to avoid infinite recursion.
4835 * TODO (5.2): Mention G++ 3.0 ABI. General cleanups.
4839 * arm-tdep.c (check_prologue_cache): Fix off by 1 error.
4840 (save_prologue_cache): Ditto.
4845 * partial-stab.h (switch): Check that pst is not null
4846 before dereferencing it.
4851 * symfile.c (add_symbol_file_command): Always initialize
4852 my_cleanup using a NULL cleanup.
4856 * demangle.c (demangling_style_names): New variable.
4857 (_initialize_demangler): Fill demangling_style_names with the
4858 names of known demangling styles from libiberty_demanglers[]. Use
4859 add_set_enum_cmd instead of add_set_cmd, to get completion on
4860 demangling style names.
4862 * proc-api.c (_initialize_proc_api): Make `procfs-file' use
4863 file-name completion.
4865 * remote-rdi.c (_initialize_remote_rdi): Ditto for `rdilogfile'.
4867 * solib.c (_initialize_solib): Ditto for `solib-search-path' and
4868 `solib-absolute-prefix'.
4870 * tracepoint.c (_initialize_tracepoint): Ditto for
4873 * win32-nat.c (_initialize_inftarg): Ditto for `dll-symbols'.
4875 * cli/cli-cmds.c (init_cli_cmds): Make `shell' and `make' use
4876 file-name completion.
4878 * infcmd.c (_initialize_infcmd): Make the following commands use
4879 the file-name completer: `tty', `args', `path', `paths', and
4884 * go32-nat.c: Include i387-nat.h.
4885 (fetch_register): New function, uses some of the guts of
4886 go32_fetch_registers and calls i387_supply_register.
4887 (go32_fetch_registers): Most of the code moved into
4888 fetch_register. Use i387_supply_fsave.
4889 (store_register): Use i387_fill_fsave instead of custom code.
4890 (go32_store_registers): Use i387_fill_fsave.
4892 * Makefile.in (go32-nat.o): Depend on i387-nat.h.
4894 * config/i386/go32.mh (NATDEPFILES): Add i387-nat.o.
4896 * completer.c (gdb_completer_file_name_break_characters): Remove
4897 slash from file-name break characters.
4898 [__MSDOS__]: Special definition for DOS/Windows file names.
4899 (line_completion_function): When completing on file names, bump
4900 `p' to the first file-name constituent character of `word', before
4901 invoking the completer.
4905 * i387-nat.c: Include "i387-nat.h". Use regnum instead of regno
4906 consistently for parameter names. Fix comments accordingly.
4907 (i387_supply_register): New function.
4908 (i387_supply_fsave): Implement using i387_supply_register.
4909 * i387-nat.h: Use regnum instead of regno consistently for
4910 parameter names. Fix comments accordingly.
4911 (i387_supply_register): New prototype.
4915 * remote.c (build_remote_gdbarch_data): Use new TARGET_ADDR_BIT
4916 instead of TARGET_PTR_BIT (to support Harvard architectures).
4921 * hpux-thread.c (hpux_thread_xfer_memory): Add mem_attrib
4922 argument to parameter list and to call in order to conform to
4923 to_xfer_memory field of struct target_ops.
4927 * somsolib.c (som_solib_add_solib_objfile): Do not use
4928 section relocation feature of syms_from_objfile. Do my own
4929 section relocation, offsetting each section of the som by
4930 either text_addr - text_link_addr or data_start.
4934 * TODO (5.1): Move ``Hardware watchpint problems'' out of 5.1.
4938 * MAINTAINERS (paper trail): Update.
4942 * target.h (target_fetch_registers): Fix comment.
4946 * f-exp.y: Include <ctype.h>.
4947 (parse_number): Ensure that ``i'' is always initialized.
4951 * MAINTAINERS: Add myself to paper trail section.
4955 * configure.in (AC_CHECK_HEADERS): Add sys/file.h.
4956 * configure, config.in: Regenerate.
4957 * corelow.c: Include <sys/file.h> if present.
4961 * inflow.c (terminal_ours_1): Initialize ``osigtou''. Only
4962 declare when have SIGTTOU.
4966 * config/djgpp/fnchange.lst: Add entries for gdb/gdbtk/*/ChangeLog-*.
4970 * MAINTAINERS: Update my email address.
4974 * NEWS: Document that "info symbol" works with COFF debug info and
4977 * minsyms.c (lookup_minimal_symbol_by_pc_section): Don't skip
4978 symbols whose SYMBOL_BFD_SECTION is NULL.
4982 Get rid of AIX specific PC_LOAD_SEGMENT, replace with PC_SOLIB.
4983 * xcoffsolib.c (xcoff_solib_address): Renamed from
4984 pc_load_segment_name. Return NULL if address is not in a shared
4985 library. Cleanup shared library name construction, using xasprintf.
4986 Format shared library member names consistent with format in exec.c.
4987 (solib_info): Format shared library member names consistent with
4989 * config/rs6000/nm-rs6000.h: Replace PC_LOAD_SEGMENT with PC_SOLIB,
4990 using xcoff_solib_address for PC_SOLIB definition.
4991 * stack.c (print_frame): Remove PC_LOAD_SEGMENT code, no longer
4996 * mipsread.c (read_alphacoff_dynamic_symtab): Replace alloca calls
4997 with xmalloc calls and cleanups.
5001 * rs6000-nat.c (child_xfer_memory): Add missing parameter
5002 'struct mem_attrib *' required by 2001-01-23 change.
5006 Updates to "make TAGS":
5007 * Makefile.in (ALLDEPFILES): Remove altos-xdep.c arm-convert.s
5008 arm-xdep.c convex-tdep.c convex-xdep.c pyr-tdep.c pyr-xdep.c
5010 (TAGFILES_NO_SRCDIR): Add $(SUBDIR_CLI_SRCS).
5014 * config/djgpp/fnchange.lst: Remove extraneous "too many dots".
5019 * defs.h (continuation): Remove unused global variable.
5023 * configure.tgt: Remove references to convex, pyramid, altos and
5025 * configure.host: Ditto.
5026 * MAINTAINERS: Ditto.
5029 * tahoe-tdep.c: Delete obsolete file.
5030 * pyr-xdep.c: Ditto.
5031 * pyr-tdep.c: Ditto.
5032 * convex-tdep.c: Ditto.
5033 * convex-xdep.c: Ditto.
5034 * config/tahoe/xm-tahoe.h: Ditto.
5035 * config/tahoe/tm-tahoe.h: Ditto.
5036 * config/tahoe/tahoe.mt: Ditto.
5037 * config/tahoe/tahoe.mh: Ditto.
5038 * config/pyr/xm-pyr.h: Ditto.
5039 * config/pyr/tm-pyr.h: Ditto.
5040 * config/pyr/pyramid.mt: Ditto.
5041 * config/pyr/pyramid.mh: Ditto.
5042 * config/m68k/xm-altos.h: Ditto.
5043 * config/m68k/tm-altos.h: Ditto.
5044 * config/m68k/altos.mt: Ditto.
5045 * config/m68k/altos.mh: Ditto.
5046 * config/convex/xm-convex.h: Ditto.
5047 * config/convex/tm-convex.h: Ditto.
5048 * config/convex/convex.mt: Ditto.
5049 * config/convex/convex.mh: Ditto.
5050 * config/convex/Convex.notes: Ditto.
5051 * config/arm/xm-arm.h: Ditto.
5052 * config/arm/nm-arm.h: Ditto.
5053 * config/arm/arm.mt: Ditto.
5054 * config/arm/arm.mh: Ditto.
5055 * arm-convert.s: Ditto.
5056 * arm-xdep.c: Ditto.
5057 * altos-xdep.c: Ditto.
5061 * defs.h (internal_error, internal_verror): Add __FILE__ and
5063 * utils.c (internal_error, internal_verror): Update.
5065 * v850-tdep.c: Update calls to internal_error.
5071 * symm-nat.c: Ditto.
5072 * sparc-tdep.c: Ditto.
5075 * rs6000-tdep.c: Ditto.
5076 * rs6000-nat.c: Ditto.
5078 * remote-vx.c: Ditto.
5079 * remote-sim.c: Ditto.
5080 * remote-mips.c: Ditto.
5081 * regcache.c: Ditto.
5082 * objfiles.h: Ditto.
5083 * objfiles.c: Ditto.
5084 * mn10300-tdep.c: Ditto.
5085 * mips-tdep.c: Ditto.
5087 * m68k-tdep.c: Ditto.
5089 * language.c: Ditto.
5090 * infptrace.c: Ditto.
5091 * inferior.h: Ditto.
5093 * ia64-tdep.c: Ditto.
5094 * i386-tdep.c: Ditto.
5095 * i386-linux-nat.c: Ditto.
5096 * hppah-nat.c: Ditto.
5097 * go32-nat.c: Ditto.
5101 * event-loop.c: Ditto.
5102 * dwarf2read.c: Ditto.
5104 * d30v-tdep.c: Ditto.
5105 * d10v-tdep.c: Ditto.
5106 * cli/cli-setshow.c: Ditto.
5107 * cli/cli-script.c: Ditto.
5109 * breakpoint.c: Ditto.
5111 * arch-utils.c: Ditto.
5112 * a29k-tdep.c: Ditto.
5113 * gdb_assert.h: Ditto.
5114 * gdbarch.sh: Ditto.
5115 * gdbarch.h, gdbarch.c: Re-generate.
5120 * event-top.h [!STOP_SIGNAL]: #include <signal.h>.
5124 * remote-sim.c (dump_mem): Cleanup printf format argument.
5125 * MAINTAINERS: Update, mn10300-elf now builds.
5129 * event-top.c: Remove duplicate #include <signal.h>.
5133 * sol-thread.c (restore_inferior_pid): Save the PID in a freshly
5135 (save_inferior_pid): Restore the PID from that tempoary
5136 buffer. Delete the buffer.
5137 * utils.c (make_cleanup_close, do_close_cleanup): Ditto for FD.
5141 * MAINTAINERS: Add ``The Obvious Fix Rule''.
5145 * MAINTAINERS: Add Michael Snyder to Solaris/SPARC list.
5149 * gdbarch.sh: Include "gdb_assert.h".
5150 (struct gdbarch): Change ``nr_data'' to unsigned.
5151 (alloc_gdbarch_data, free_gdbarch_data): New functions.
5152 (gdbarch_free): Free the data-pointer vector. Use xfree to delete
5153 architecture vector.
5154 (struct gdbarch_data, struct gdbarch_data_registration): Move init
5155 method to gdbarch_data. Add free method, make index unsigned.
5156 (struct gdbarch_data_registry): Make nr unsigned.
5157 (register_gdbarch_data): Add free parameter. Store in
5159 (init_gdbarch_data): Use set_gdbarch_data.
5160 (set_gdbarch_data): New function.
5162 * gdbarch.h, gdbarch.c: Re-generate.
5166 * ser-unix.c (hardware_print_tty_state) [HAVE_SGTTY]: Call
5167 fprintf_filtered with correct arguments.
5172 * findvar.c: Buffers of size MAX_REGISTER_RAW_SIZE or REGISTER_BYTES
5173 must be allocated dynamically, since these are no longer constants.
5175 * regcache.c: Ditto.
5177 * sol-thread.c: Ditto.
5179 * config/sparc/sun4sol2.mh (MH_CFLAGS): Add -I/usr/include/v9, as a
5180 work-around for a missing Sun header file in solaris for sparc64.
5184 * config/arm/linux.mh (NATDEPFILES): Add proc-service.o,
5185 thread-db.o, lin-lwp.o; remove lin-thread.o, linux-thread.o.
5186 * config/arm/nm-linux.h (PREPARE_TO_PROCEED, ATTACH_LWP,
5187 GET_THREAD_SIGNALS): Define.
5188 * arm-linux-nat.c (fill_gregset): Correct type of argument.
5189 (supply_gregset): Likewise.
5190 (fill_fpregset): Likewise.
5191 (supply_fpregset): Likewise.
5195 * valops.c (value_cast): If casting a scalar to a pointer, do not
5196 issue a message about truncation unless it exceeds the length of
5197 an address, not the length of a pointer. This is because what the
5198 user gives us is an address, not a pointer, and we will ultimately
5199 convert it (via ADDRESS_TO_POINTER) to a pointer, not truncate it
5200 to a pointer. This allows things like "print *(int *)0x01000234"
5201 to work without generating a misleading message on a target having
5202 two byte pointers and four byte addresses.
5206 * win32-nat.c: Change PTR to void * throughout.
5210 * signals.h: Removed.
5211 * event-top.c (#include <signal.h>): Changed from signals.h.
5212 * inflow.c: Likewise.
5213 * mac-xdep.c: Likewise.
5214 * ser-pipe.c: Likewise.
5215 * ser-tcp.c: Likewise.
5216 * standalone.c: Likewise.
5218 * utils.c: Likewise.
5219 * Makefile.in: Removed signals.h from dependencies.
5224 * inferior.h (step_over_calls_kind): Remove trailing comma from
5226 (step_over_calls): Declare as extern rather than global.
5230 * sh-tdep.c: Update copyright.
5231 (sh_extract_return_value): Rewrite.
5232 (sh3e_sh4_extract_return_value): New function.
5233 (sh_gdbarch_init): Initialize gdbarch_extract-return_value to new
5234 version of the function for sh3e and sh4 CPUs.
5238 * hppah-nat.c (child_xfer_memory): Add parameter 'struct mem_attrib *'
5239 to conform with interface change.
5243 * config/djgpp/fnchange.lst: Tweak to make consistent with the
5246 * config/djgpp/djconfig.sh: Use explicit absolute file name when
5249 * ser-go32.c (dos_write) [UART_FIFO_WORKS]: Use outportsb only if
5250 UART_FIFO_WORKS is defined. Otherwise use outportb.
5253 * go32-nat.c (go32_xfer_memory): Make the argument list consistent
5254 with target.h's `to_xfer_memory' member.
5258 * ppc-bdm.c (#include <signal.h>): Removed.
5259 * remote-array.c: Likewise.
5260 * remote-bug.c: Likewise.
5261 * remote-e7000.c: Likewise.
5262 * remote-mips.c: Likewise.
5263 * remote-os9k.c: Likewise.
5264 * remote-st.c: Likewise.
5265 * remote-udi.c: Likewise.
5266 * remote-vx29k.c: Likewise.
5267 * remote-vx68.c: Likewise.
5268 * remote-vx960.c: Likewise.
5269 * remote-vxmips.c: Likewise.
5270 * remote-vxsparc.c: Likewise.
5274 * remote-utils.h (sr_set_device): Changed free() to xfree() where
5275 appropriate. Also changed Copyright to include 2001.
5276 * symtab.h (obstack_chunk_free, SYMBOL_INIT_DEMANGLED_NAME): Likewise.
5277 * value.h (value_free): Likewise.
5278 * gdbarch.sh (gdbarch_free): Likewise.
5279 * gdbarch.c, gdbarch.h: Regenerated.
5283 * cli/cli-cmds.c (apropos_command): Changed occurance of free() to
5284 xfree(). Also changed Copyright to include 2001.
5288 * monitor.c (#include "gdb_wait.h"): Removed.
5290 * ppc-bdm.c: Likewise.
5291 * remote-adapt.c: Likewise.
5292 * remote-array.c: Likewise.
5293 * remote-bug.c: Likewise.
5294 * remote-e7000.c: Likewise.
5295 * remote-eb.c: Likewise.
5296 * remote-es.c: Likewise.
5297 * remote-mips.c: Likewise.
5298 * remote-mm.c: Likewise.
5299 * remote-nindy.c: Likewise.
5300 * remote-os9k.c: Likewise.
5301 * remote-rdi.c: Likewise.
5302 * remote-rdp.c: Likewise.
5303 * remote-sds.c: Likewise.
5304 * remote-sim.c: Likewise.
5305 * remote-st.c: Likewise.
5306 * remote-udi.c: Likewise.
5307 * remote-vx.c: Likewise.
5308 * remote-vx29k.c: Likewise.
5309 * remote-vx68.c: Likewise.
5310 * remote-vx960.c: Likewise.
5311 * remote-vxmips.c: Likewise.
5312 * remote-vxsparc.c: Likewise.
5313 * remote.c: Likewise.
5314 * ser-pipe.c: Likewise.
5315 * ser-unix.c: Likewise.
5316 * Makefile.in: Updated dependencies.
5320 * event-loop.c: Change inclusion of string.h to gdb_string.h and
5321 updated the copyright notice.
5322 * ser-pipe.c: Ditto.
5323 * mi/mi-cmds.c: Ditto.
5324 * mi/mi-console.c: Ditto.
5325 * mi/mi-getopt.c: Ditto.
5326 * mi/mi-parse.c: Ditto.
5330 * MAINTAINERS: Add David Smith to Write After Approval list.
5334 * cli/cli-utils.c (putchar_filtered): Move function from here.
5335 * utils.c (putchar_filtered): To here.
5336 * cli/cli-utils.h (putchar_filtered): Move declaration from here.
5337 * defs.h (putchar_filtered): To here.
5341 * configure.in (AC_CHECK_FUNCS): Replace vfork test with
5342 AC_FUNC_VFORK macro.
5343 * config.in, configure: Re-generate.
5345 * gdb_vfork.h: New file.
5346 * ser-pipe.c (pipe_open): Update. Include "gdb_vfork.h".
5347 * fork-child.c (fork_inferior): Ditto.
5351 * defs.h (strsave): Delete declaration.
5352 * utils.c (strsave): Delete definition.
5353 * TODO (strsave): Update
5355 * mac-xdep.c (tilde_expand): Replace strsave with xstrdup.
5356 * sparcl-tdep.c (sparclite_open): Ditto.
5357 * mips-tdep.c (mips_set_processor_type_command): Ditto.
5358 (_initialize_mips_tdep): Ditto.
5359 * solib.c (solib_open): Ditto.
5360 * symfile.c (add_filename_language): Ditto.
5361 (set_ext_lang_command): Ditto.
5362 * source.c (init_source_path): Ditto.
5364 * sh3-rom.c (sh3_open): Ditto.
5366 * serial.c (serial_open): Ditto.
5367 * remote-mips.c (common_open): Ditto.
5368 * monitor.c (monitor_open): Ditto.
5369 * m32r-rom.c (m32r_upload_command): Ditto.
5370 * infcmd.c (path_command): Ditto.
5371 * f-exp.y (parse_number): Ditto.
5372 * breakpoint.c (create_longjmp_breakpoint): Ditto.
5373 (create_thread_event_breakpoint): Ditto.
5374 * arc-tdep.c (arc_set_cpu_type_command): Ditto.
5375 (_initialize_arc_tdep): Ditto.
5377 Tue Jan 30 15:14:26 2001 Andrew Cagney <cagney@skil>
5379 * cli/cli-script.c (define_command): Check for a bad hook value in
5384 * configure/sh/embed.mt: New file.
5385 * configure/sh/linux.mt: New file.
5386 * configure/sh/sh.mt: Removed.
5387 * configure.tgt (sh-*-hms,sh-*-coff*,sh-*-elf*,sh-*-linux): New targets.
5392 * symtab.c (block_lookup_symbol): Use 'namespace' parameter in
5393 symbol comparisons in binary search.
5397 * win32-nat.c (child_xfer_memory): Add missing argument required by
5402 * ui-out.c (do_list_end): New function.
5403 (make_cleanup_ui_out_list_end): New function.
5404 * ui-out.h: Provide prototype for make_cleanup_ui_out_list_end.
5405 * stack.c (print_frame) [UI_OUT]: Call
5406 make_cleanup_ui_out_list_end to make sure we mark the end of the
5407 list if we do a non-local exit. At the end of the function,
5408 instead of calling ui_out_list_end directly, let do_cleanups
5413 Fix double parsing of filenames passed as command line arguments
5414 to GDB (causes weird handling of escape characters).
5415 Also, remove dependencies on the CLI from libgdb.
5416 * call-cmds.h: Remove declaration of exec_file_command().
5417 * gdbcore.h: Remove declaration of exec_file_command().
5418 Add declarations for exec_open() and exec_file_clear().
5419 * symfile.h: Add declarations for symbol_file_add_main() and
5420 symbol_file_clear().
5421 * exec.c (exec_open): New function. Implements to_open for exec
5423 (exec_file_clear): New function. Makes GDB forget about a previously
5424 specified executable file.
5425 (exec_file_attach): Move parsing of arguments from here ...
5426 (exec_file_command): ... to here.
5427 (init_exec_ops): Use exec_open(), not exec_file_command() to
5428 implement to_open for exec targets.
5429 * symfile.c (symbol_file_add_main): New function. Call symbol_file_add()
5430 with default values. Used when the file name has already been parsed.
5431 (symbol_file_clear): New function. Makes GDB forget about previously
5433 (symbol_file_command): Call the above function instead of inline code.
5434 * main.c: Include "symfile.h" and "gdbcore.h" instead of the deprecated
5436 (captured_main): Call exec_file_attach() and symbol_file_add_main()
5437 instead of exec_file_command() and symbol_file_command().
5438 (captured_main): Add comment.
5439 * corefile.c: Include "symfile.h".
5440 (core_file_command): Call symbol_file_add_main() instead of
5441 symbol_file_command().
5442 (reopen_exec_file): Call exec_open() instead of exec_file_command().
5443 * infcmd.c: Include "symfile.h".
5444 (attach_command): Call symbol_file_add_main() instead of
5445 symbol_file_command().
5446 * infrun.c: Remove comment about the inclusion of "symfile.h",
5447 not any longer appropriate.
5448 (follow_exec): Call symbol_file_add_main() instead of
5449 symbol_file_command().
5450 * remote-es.c: Include "symfile.h".
5451 (es1800_load): Call symbol_file_add_main() instead of
5452 symbol_file_command().
5453 * remote-vx.c: Remove comment about the inclusion of "symfile.h",
5454 not any longer appropriate.
5455 (vx-wait): Call symbol_file_add_main() instead of
5456 symbol_file_command().
5457 * solib-svr4.c (open_symbol_file_object): Call symbol_file_add_main()
5458 instead of symbol_file_command().
5459 * v850ice.c (ice_file): Call exec_open(), exec_file_attach() and
5460 symbol_file_add_main() instead of exec_file_command() and
5461 symbol_file_command().
5462 * Makefile.in: Update dependencies.
5466 * remote-udi.c (udi_open): Change strdup to xstrdup.
5467 * thread.c (thread_apply_all_command): Change strdup to xstrdup.
5468 Update copyright message.
5469 * varobj.c (delete_variable_1): Likewise.
5471 * gdb_string.h: Remove declaration of strdup. Update copyright
5473 * config/xm-mpw.h: Likewise.
5474 * config/i386/xm-i386mach.h: Likewise.
5475 * config/m68k/xm-apollo68b.h: Likewise.
5476 * config/m68k/xm-hp300bsd.h: Likewise.
5477 * config/rs6000/xm-rs6000.h: Likewise.
5478 * config/vax/xm-vaxult.h: Remove declaration of strdup.
5479 * config/vax/xm-vaxult2.h: Likewise.
5483 * MAINTAINERS: Add Jeff Holcomb to Write After Approval list.
5487 * target.c (target_xfer_memory_partial): Return -1 on failure due
5488 to invalid access mode attribute.
5492 * win32-nat.c (_initialize_core_win32): Prototype correctly.
5496 * config/alpha/tm-fbsd.h: Update copyright.
5497 (USE_STRUCT_CONVENTION): Define in terms of
5498 alphabsd_use_struct_convention.
5499 * config/alpha/fbsd.mt (TDEPFILES): Add alphafbsd-tdep.c.
5500 * alphafbsd-tdep.c: New file.
5504 * top.c (print_gdb_version): Update Copyright year.
5508 * dcache.c (dcache_write_line): Fix typo.
5510 * memattr.c (delete_mem_region): Replace free() with xfree().
5511 (mem_number): Add explicit type.
5513 * sol-thread.c (sol_thread_xfer_memory): Add attrib argument.
5514 (rw_common): Likewise.
5518 * infcmd.c (get_inferior_args, set_inferior_args): Accessor functions
5519 for the inferior program arguments.
5520 (run_command, run_no_args_command, init_infcmd)): Use accessor
5521 functions to set the inferior program arguments.
5522 * inferior.h: Add definitions to the accessor functions above.
5526 * dwarf2read.c (read_tag_const_type, read_tag_volatile_type):
5527 Implement these correctly, using make_cv_type.
5531 * exec.c (xfer_memory): Add attrib argument.
5532 * infptrace.c (child_xfer_memory): Likewise.
5533 * lin-lwp.c (lin_lwp_xfer_memory): Likewise.
5534 * monitor.c (monitor_xfer_memory): Likewise.
5535 * remote-adapt.c (adapt_xfer_inferior_memory): Likewise.
5536 * remote-array.c (array_xfer_memory): Likewise.
5537 * remote-bug.c (bug_xfer_memory): Likewise.
5538 * remote-e7000.c (e7000_xfer_inferior_memory): Likewise.
5539 * remote-eb.c (eb_xfer_inferior_memory): Likewise.
5540 * remote-es.c (es1800_xfer_inferior_memory): Likewise.
5541 * remote-mips.c (mips_xfer_memory): Likewise.
5542 * remote-mm.c (mm_xfer_inferior_memory): Likewise.
5543 * remote-nindy.c (nindy_xfer_inferior_memory): Likewise.
5544 * remote-os9k.c (rombug_xfer_inferior_memory): Likewise.
5545 * remote-rdi.c (arm_rdi_xfer_memory): Likewise.
5546 * remote-rdp.c (remote_rdp_xfer_inferior_memory): Likewise.
5547 * remote-sds.c (sds_xfer_memory): Likewise.
5548 * remote-sim.c (gdbsim_xfer_inferior_memory): Likewise.
5549 * remote-st.c (st2000_xfer_inferior_memory): Likewise.
5550 * remote-udi.c (udi_xfer_inferior_memory): Likewise.
5551 * remote-vx.c (vx_xfer_memory): Likewise.
5552 * remote.c (remote_xfer_memory): Likewise.
5553 * target.c (debug_to_xfer_memory, do_xfer_memory): Likewise.
5554 * target.h (child_xfer_memory, do_xfer_memory, xfer_memory): Likewise.
5555 * thread-db.c (thread_db_xfer_memory): Likewise.
5557 * target.h (#include "memattr.h"): Added.
5558 (target_ops.to_xfer_memory): Add attrib argument.
5560 * wince.c (_initialize_inftarg): Removed call to set_dcache_state.
5561 * dcache.h (set_dcache_state): Removed declaration.
5562 * dcache.c (set_dcache_state): Removed definition
5564 * dcache.c: Update module comment, as dcache is now enabled and
5565 disabled with memory region attributes instead of by the global
5566 variable "remotecache". Add comment describing the interaction
5567 between dcache and memory region attributes.
5568 (dcache_xfer_memory): Add comment describing benefits of moving
5569 cache writeback to a higher level.
5570 (dcache_struct): Removed cache_has_stuff field. This was used to
5571 record whether the cache had been accessed in order to invalidate
5572 it when it was disabled. However, this is not needed because the
5573 cache is write through and the code that enables, disables, and
5574 deletes memory regions invalidate the cache. Add comment which
5575 suggests that we could be more selective and only invalidate those
5576 cache lines containing data from those memory regions.
5577 (dcache_invalidate): Updated.
5578 (dcache_xfer_memory): Updated.
5580 (dcache_alloc): Don't abort() if dcache_enabled_p is clear.
5581 (dcache_xfer_memory): Removed code that called do_xfer_memory() to
5582 perform a uncached transfer if dcache_enabled_p was clear. This
5583 function is now only called if caching is enabled for the memory
5585 (dcache_info): Always print cache info.
5587 * target.c (do_xfer_memory): Add attrib argument.
5588 (target_xfer_memory, target_xfer_memory_partial): Break transfer
5589 into chunks defined by memory regions, pass region attributes to
5591 * dcache.c (dcache_read_line, dcache_write_line): Likewise.
5593 * Makefile.in (SFILES): Add memattr.c.
5594 (COMMON_OBS): Add memattr.o.
5595 (dcache.o): Add target.h to dependencies.
5596 * memattr.c: New file.
5597 * memattr.h: Likewise.
5599 * config/m32r/m32r.mt (GDBSERVER_LIBS): Added ../../intl/libintl.a.
5600 * config/mips/vr5000.mt (GDBSERVER_LIBS): Likewise.
5601 * config/tic80/tic80.mt (GDBSERVER_LIBS): Likewise.
5602 * gdbserver/low-sim.c (#include "defs.h"): Removed.
5603 (mygeneric_load): Rename from generic_load.
5605 * gdbserver/low-hppabsd.c (#include "server.h"): Added.
5606 (#include "defs.h"): Removed.
5607 (inferior_pid, perror_with_name): Remove declarations.
5608 * gdbserver/low-linux.c: Likewise.
5609 * gdbserver/low-nbsd.c: Likewise.
5610 * gdbserver/low-sparc.c: Likewise.
5611 * gdbserver/low-sun3.c: Likewise.
5613 * i386-stub.c: Re-indent.
5614 * m68k-stub.c: Re-indent.
5618 * gdbarch.sh (PARM_BOUNDARY): Define.
5619 * gdbarch.c: Regenerate.
5620 * gdbarch.h: Regenerate.
5624 * ns32k-tdep.c: #include "frame.h"
5625 * config/ns32k/tm-umax.h (FRAME_FIND_SAVED_REGS): Restore. It
5626 appears to have been inadvertantly removed sometime in May 1999.
5628 * Revert 2000-11-09 changes where shared library objects were
5629 moved from NATDEPFILES to TDEPFILES on NetBSD targets. While
5630 we'd like to be able to debug dynamically linked executables,
5631 this makes it impossible to build a cross debugger on a many
5634 * config/i386/nbsd.mt: Remove solib.o, solib-svr4.o from TDEPFILES.
5635 * config/i386/nbsdelf.mt: Likewise.
5636 * config/m68k/nbsd.mt: Likewise.
5637 * config/ns32k/nbsd.mt: Likewise.
5638 * config/powerpc/nbsd.mt: Likewise.
5639 * config/sparc/nbsd.mt: Likewise.
5640 * config/sparc/nbsdelf.mt: Likewise.
5641 * config/i386/nbsd.mh: Add solib.o, solib-svr4.o to NATDEPFILES.
5642 * config/i386/nbsdelf.mh: Likewise.
5643 * config/m68k/nbsd.mh: Likewise.
5644 * config/ns32k/nbsd.mh: Likewise.
5645 * config/powerpc/nbsd.mh: Likewise.
5646 * config/sparc/nbsd.mh: Likewise.
5650 * dbxread.c (read_ofile_symtab): Stay with AUTO_DEMANGLING for G++.
5651 (process_one_symbol): Likewise.
5652 * dwarfread.c (handle_producer): Likewise.
5656 * configure.in (build_warnings): Disable -Wuninitialized until GDB
5657 compiles with -Wuninitialized,-Werror.
5658 * configure: Regenerate.
5660 * MAINTAINERS: Add list of buildable targets.
5664 * defs.h (STRCMP): Delete macro.
5666 * objfiles.c (objfile_relocate): Replace STRCMP with call to
5668 * symtab.c (lookup_partial_symbol, lookup_block_symbol): Ditto.
5669 * symfile.c (compare_symbols): Ditto.
5670 * standalone.c (open): Ditto.
5671 * remote-es.c (verify_break): Ditto.
5672 * cli/cli-decode.c (add_cmd, add_show_from_set): Ditto.
5674 * symfile.c (compare_psymbols): Delete comment refering to STRCMP.
5678 * varobj.c (FREEIF): Delete macro.
5679 (varobj_set_value, free_variable): Replace FREEIF with ``xfree''
5684 * arc-tdep.c (arc_cpu_type_table): Add new arc core numbers.
5685 (arc_print_insn): No bfd available, so pass NULL to
5686 arc_get_disassembler.
5690 * symtab.c (lookup_symbol_aux): Call lookup_symbol_aux to lookup
5691 a mangled symbol rather than recursing into lookup_symbol, since
5692 this will just re-unmangle the name & call lookup_symbol_aux -
5693 leading to an infinite recursion.
5697 * infcmd.c (print_return_value): Restore another space lost by
5698 switch to UIOUT. ``$NN='' should be ``$NN =''.
5702 * target.h (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT)
5703 * breakpoint.c (TARGET_REGION_OK_FOR_HW_WATCHPOINT): Wrap macro
5704 definition in parenthesis.
5709 * remote.c (remote_remove_hw_breakpoint): Add 'len' field to Z
5711 (remote_insert_hw_breakpoint): Ditto.
5715 * config/m68k/tm-nbsd.h (USE_STRUCT_CONVENTION): Define.
5716 (BPT_VECTOR, REMOTE_BPT_VECTOR): Change to 0xf.
5717 * config/m68k/nbsd.mt (TDEPFILES): Add m68knbsd-tdep.o.
5718 * m68knbsd-tdep.c: New file.
5720 * i386nbsd-tdep.c: Remove #if 0'd out #includes.
5722 * m68knbsd-nat.c: #include gdbcore.h.
5726 * MAINTAINERS: Add J.T. Conklin to Blanket Write Privs.
5730 * procfs.c (procfs_stopped_by_watchpoint): Don't die if process
5731 goes away -- just return false (ie. not stopped by watchpoint).
5732 * source.c (openp): Fix typo in comment.
5736 * blockframe.c (generic_get_saved_register): Spelling fix.
5737 * frame.h (FRAME_FP): Spelling fix.
5741 * infcmd.c (print_return_value): Restore space lost by switch to
5742 UIOUT. ``$NN='' should be ``$NN =''.
5746 * regcache.c (set_register_cached, register_buffer,
5747 real_register, pseudo_register fetch_register, store_register):
5749 (register_changed, read_relative_register_raw_bytes_for_frame,
5750 registers_changed, registers_fetched, read_register_bytes,
5751 read_register_gen, write_register_gen, read_register,
5752 read_signed_register, write_register, supply_register): Replace
5753 register_valid[] with register_cached() and
5754 set_register_cached().
5755 (read_register_bytes, read_register_gen, write_register_gen,
5756 read_register, read_signed_register, write_register,
5757 supply_register): Replace registers[] with register_buffer().
5758 (read_register_bytes, read_register_gen, read_register,
5759 read_signed_register): Call fetch_register().
5760 (write_register_gen, write_register): Call real_register() and
5762 (write_register_bytes): Call store_register().
5763 * value.h (set_register_cached, register_buffer): Prototype.
5764 * remote.c (remote_fetch_registers): Allocate regs[] with a
5765 run-time size. Replace register_valid[] with
5766 set_register_cached().
5767 (store_register_using_P, remote_store_registers): Replace
5768 registers[] with register_buffer().
5772 * regcache.c: Change "write-back" comment to "write-through".
5773 Change "regno" to "regnum".
5774 (read_register, read_signed_register): Remove "raw" from return
5776 (supply_register): Spelling fix.
5777 * value.h: Change "regno" to "regnum".
5781 * Makefile.in (install-gdbtk): Add .itcl files to the list of files
5786 * mips-tdep.c (mips_coerce_float_to_double): Fix typo in comment.
5790 * valops.c (VALUE_SUBSTRING_START): Delete.
5794 * Makefile.in (SUBDIR_CLI_OBS): Add cli/cli-utils.o.
5795 (SUBDIR_CLI_SRCS): Add cli/cli-utils.c.
5796 (cli_utils_h): New variable.
5797 (cli/cli-utils.o): New rule.
5798 * cli/cli-utils.c: New file.
5799 * cli/cli-utils.h: New file.
5803 * config/i386/tm-i386.h (REGISTER_CONVERT_TO_VIRTUAL,
5804 REGISTER_CONVERT_TO_RAW): Delete trailing semicolon.
5808 * alphabsd-nat.c, i386-linux-nat.c, i386bsd-nat.c: Fix typo in
5813 * sh-tdep.c (sh_default_store_return_value): Allow for small return type.
5814 (sh3e_sh4_store_return_value): Call sh_default_store_return_value for
5816 * sparc-tdep.c (sparc_frame_chain): Fix typo in comment.
5817 Update copyright notice.
5819 For older changes see ChangeLog-2000
5825 version-control: never
projects / binutils.git / blob