]> Git Repo - binutils.git/blob - gdb/i386v-nat.c
* elfcode.h (elf_bfd_final_link): If trying to generate a shared
[binutils.git] / gdb / i386v-nat.c
1 /* Intel 386 native support for SYSV systems (pre-SVR4).
2    Copyright (C) 1988, 1989, 1991, 1992, 1994 Free Software Foundation, Inc.
3
4 This file is part of GDB.
5
6 This program is free software; you can redistribute it and/or modify
7 it under the terms of the GNU General Public License as published by
8 the Free Software Foundation; either version 2 of the License, or
9 (at your option) any later version.
10
11 This program is distributed in the hope that it will be useful,
12 but WITHOUT ANY WARRANTY; without even the implied warranty of
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
14 GNU General Public License for more details.
15
16 You should have received a copy of the GNU General Public License
17 along with this program; if not, write to the Free Software
18 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
19
20 #include "defs.h"
21 #include "frame.h"
22 #include "inferior.h"
23 #include "language.h"
24 #include "gdbcore.h"
25
26 #ifdef USG
27 #include <sys/types.h>
28 #endif
29
30 #include <sys/param.h>
31 #include <sys/dir.h>
32 #include <signal.h>
33 #include <sys/user.h>
34 #include <sys/ioctl.h>
35 #include <fcntl.h>
36
37 #ifdef TARGET_CAN_USE_HARDWARE_WATCHPOINT
38 #include <sys/debugreg.h>
39 #endif
40
41 #include <sys/file.h>
42 #include <sys/stat.h>
43
44 #ifndef NO_SYS_REG_H
45 #include <sys/reg.h>
46 #endif
47
48 #include "floatformat.h"
49
50 #include "target.h"
51
52 \f
53 /* this table must line up with REGISTER_NAMES in tm-i386v.h */
54 /* symbols like 'EAX' come from <sys/reg.h> */
55 static int regmap[] = 
56 {
57   EAX, ECX, EDX, EBX,
58   UESP, EBP, ESI, EDI,
59   EIP, EFL, CS, SS,
60   DS, ES, FS, GS,
61 };
62
63 /* blockend is the value of u.u_ar0, and points to the
64  * place where GS is stored
65  */
66
67 int
68 i386_register_u_addr (blockend, regnum)
69      int blockend;
70      int regnum;
71 {
72 #if 0
73   /* this will be needed if fp registers are reinstated */
74   /* for now, you can look at them with 'info float'
75    * sys5 wont let you change them with ptrace anyway
76    */
77   if (regnum >= FP0_REGNUM && regnum <= FP7_REGNUM) 
78     {
79       int ubase, fpstate;
80       struct user u;
81       ubase = blockend + 4 * (SS + 1) - KSTKSZ;
82       fpstate = ubase + ((char *)&u.u_fpstate - (char *)&u);
83       return (fpstate + 0x1c + 10 * (regnum - FP0_REGNUM));
84     } 
85   else
86 #endif
87     return (blockend + 4 * regmap[regnum]);
88   
89 }
90 \f
91 #ifdef TARGET_CAN_USE_HARDWARE_WATCHPOINT
92
93 #if !defined (offsetof)
94 #define offsetof(TYPE, MEMBER) ((unsigned long) &((TYPE *)0)->MEMBER)
95 #endif
96
97 /* Record the value of the debug control register.  */
98 static int debug_control_mirror;
99
100 /* Record which address associates with which register.  */
101 static CORE_ADDR address_lookup[DR_LASTADDR - DR_FIRSTADDR + 1];
102
103 static int
104 i386_insert_nonaligned_watchpoint PARAMS ((int, CORE_ADDR, int, int));
105
106 /* Insert a watchpoint.  */
107
108 int
109 i386_insert_watchpoint (pid, addr, len, rw)
110      int pid;
111      CORE_ADDR addr;
112      int len;
113      int rw;
114 {
115   int i;
116   int read_write_bits, len_bits;
117   int free_debug_register;
118   int register_number;
119   
120   /* Look for a free debug register.  */
121   for (i = DR_FIRSTADDR; i <= DR_LASTADDR; i++)
122     {
123       if (address_lookup[i - DR_FIRSTADDR] == 0)
124         break;
125     }
126
127   /* No more debug registers!  */
128   if (i > DR_LASTADDR)
129     return -1;
130
131   read_write_bits = ((rw & 1) ? DR_RW_READ : 0) | ((rw & 2) ? DR_RW_WRITE : 0);
132
133   if (len == 1)
134     len_bits = DR_LEN_1;
135   else if (len == 2)
136     {
137       if (addr % 2)
138         return i386_insert_nonaligned_watchpoint (pid, addr, len, rw);
139       len_bits = DR_LEN_2;
140     }
141
142   else if (len == 4)
143     {
144       if (addr % 4)
145         return i386_insert_nonaligned_watchpoint (pid, addr, len, rw);
146       len_bits = DR_LEN_4;
147     }
148   else
149     return i386_insert_nonaligned_watchpoint (pid, addr, len, rw);
150   
151   free_debug_register = i;
152   register_number = free_debug_register - DR_FIRSTADDR;
153   debug_control_mirror |=
154     ((read_write_bits | len_bits)
155      << (DR_CONTROL_SHIFT + DR_CONTROL_SIZE * register_number));
156   debug_control_mirror |=
157     (1 << (DR_LOCAL_ENABLE_SHIFT + DR_ENABLE_SIZE * register_number));
158   debug_control_mirror |= DR_LOCAL_SLOWDOWN;
159   debug_control_mirror &= ~DR_CONTROL_RESERVED;
160   
161   ptrace (6, pid, offsetof (struct user, u_debugreg[DR_CONTROL]),
162           debug_control_mirror);
163   ptrace (6, pid, offsetof (struct user, u_debugreg[free_debug_register]),
164           addr);
165
166   /* Record where we came from.  */
167   address_lookup[register_number] = addr;
168   return 0;
169 }
170
171 static int
172 i386_insert_nonaligned_watchpoint (pid, addr, len, rw)
173      int                pid;
174      CORE_ADDR          addr;
175      int                len;
176      int                rw;
177 {
178   int align;
179   int size;
180   int rv;
181
182   static int size_try_array[16] = {
183     1, 1, 1, 1,                 /* trying size one */
184     2, 1, 2, 1,                 /* trying size two */
185     2, 1, 2, 1,                 /* trying size three */
186     4, 1, 2, 1                  /* trying size four */
187   };
188
189   rv = 0;
190   while (len > 0)
191     {
192       align = addr % 4;
193       /* Four is the maximum length for 386.  */
194       size = (len > 4) ? 3 : len - 1;
195       size = size_try_array[size * 4 + align];
196
197       rv = i386_insert_watchpoint (pid, addr, size, rw);
198       if (rv)
199         {
200           i386_remove_watchpoint (pid, addr, size);
201           return rv;
202         }
203       addr += size;
204       len -= size;
205     }
206   return rv;
207 }
208
209 /* Remove a watchpoint.  */
210
211 int
212 i386_remove_watchpoint (pid, addr, len)
213      int pid;
214      CORE_ADDR addr;
215      int len;
216 {
217   int i;
218   int register_number;
219
220   for (i = DR_FIRSTADDR; i <= DR_LASTADDR; i++)
221     {
222       register_number = i - DR_FIRSTADDR;
223       if (address_lookup[register_number] == addr)
224         {
225           debug_control_mirror &=
226             ~(1 << (DR_LOCAL_ENABLE_SHIFT + DR_ENABLE_SIZE * register_number));
227           address_lookup[register_number] = 0;
228         }
229     }
230   ptrace (6, pid, offsetof (struct user, u_debugreg[DR_CONTROL]),
231           debug_control_mirror);
232   ptrace (6, pid, offsetof (struct user, u_debugreg[DR_STATUS]), 0);
233
234   return 0;
235 }
236
237 /* Check if stopped by a watchpoint.  */
238
239 CORE_ADDR
240 i386_stopped_by_watchpoint (pid)
241     int pid;
242 {
243   int i;
244   int status;
245
246   status = ptrace (3, pid, offsetof (struct user, u_debugreg[DR_STATUS]), 0);
247   ptrace (6, pid, offsetof (struct user, u_debugreg[DR_STATUS]), 0);
248
249   for (i = DR_FIRSTADDR; i <= DR_LASTADDR; i++)
250     {
251       if (status & (1 << (i - DR_FIRSTADDR)))
252         return address_lookup[i - DR_FIRSTADDR];
253     }
254
255   return 0;
256 }
257
258 #endif /* TARGET_CAN_USE_HARDWARE_WATCHPOINT */
259
260 #if 0
261 /* using FLOAT_INFO as is would be a problem.  FLOAT_INFO is called
262    via a command xxx and eventually calls ptrace without ever having
263    traversed the target vector.  This would be terribly impolite
264    behaviour for a sun4 hosted remote gdb.
265
266    A fix might be to move this code into the "info registers" command.
267    [email protected] 15 Sept 92. */
268 i386_float_info ()
269 {
270   struct user u; /* just for address computations */
271   int i;
272   /* fpstate defined in <sys/user.h> */
273   struct fpstate *fpstatep;
274   char buf[sizeof (struct fpstate) + 2 * sizeof (int)];
275   unsigned int uaddr;
276   char fpvalid = 0;
277   unsigned int rounded_addr;
278   unsigned int rounded_size;
279   extern int corechan;
280   int skip;
281   
282   uaddr = (char *)&u.u_fpvalid - (char *)&u;
283   if (target_has_execution)
284     {
285       unsigned int data;
286       unsigned int mask;
287       
288       rounded_addr = uaddr & -sizeof (int);
289       data = ptrace (3, inferior_pid, (PTRACE_ARG3_TYPE) rounded_addr, 0);
290       mask = 0xff << ((uaddr - rounded_addr) * 8);
291       
292       fpvalid = ((data & mask) != 0);
293     } 
294 #if 0
295   else 
296     {
297       if (lseek (corechan, uaddr, 0) < 0)
298         perror ("seek on core file");
299       if (myread (corechan, &fpvalid, 1) < 0) 
300         perror ("read on core file");
301       
302     }
303 #endif  /* no core support yet */
304   
305   if (fpvalid == 0) 
306     {
307       printf_unfiltered ("no floating point status saved\n");
308       return;
309     }
310   
311   uaddr = (char *)&U_FPSTATE(u) - (char *)&u;
312   if (target_has_execution)
313     {
314       int *ip;
315       
316       rounded_addr = uaddr & -sizeof (int);
317       rounded_size = (((uaddr + sizeof (struct fpstate)) - uaddr) +
318                       sizeof (int) - 1) / sizeof (int);
319       skip = uaddr - rounded_addr;
320       
321       ip = (int *)buf;
322       for (i = 0; i < rounded_size; i++) 
323         {
324           *ip++ = ptrace (3, inferior_pid, (PTRACE_ARG3_TYPE) rounded_addr, 0);
325           rounded_addr += sizeof (int);
326         }
327     } 
328 #if 0
329   else 
330     {
331       if (lseek (corechan, uaddr, 0) < 0)
332         perror_with_name ("seek on core file");
333       if (myread (corechan, buf, sizeof (struct fpstate)) < 0) 
334         perror_with_name ("read from core file");
335       skip = 0;
336     }
337 #endif  /* 0 */ 
338
339   fpstatep = (struct fpstate *)(buf + skip);
340   print_387_status (fpstatep->status, (struct env387 *)fpstatep->state);
341 }
342
343 #endif /* never */
This page took 0.041365 seconds and 4 git commands to generate.