* gdb.texinfo (Breakpoint Menus): Delete. Contents moved inside

[binutils.git] / gdb / doc / ChangeLog

2008-04-03  Joel Brobecker  <[email protected]>

	* gdb.texinfo (Breakpoint Menus): Delete. Contents moved inside
	new node "Ambiguous Expressions".  Replace references to this
	node by references to "Ambiguous Expressions" throughout.
	(Ambiguous Expressions): New node.

2008-03-26  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (MIPS Features, PowerPC Features): Add @node.

2008-03-21  Pedro Alves  <[email protected]>

	* gdb.texinfo (Debugging Output): Document
	"set/show debug lin-lwp-async".
	(Maintenance Commands): Document "maint set/show linux-async".

2008-03-21  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (Expressions): Update description of malloced arrays.

2008-03-15  Vladimir Prus  <[email protected]>

	* gdb.texinfo (Thread Commands): Document
	-thread-info.  Remove -thread-list-all-threads.

2008-03-14  Pedro Alves  <[email protected]>
	    Sandra Loosemore  <[email protected]>

	* gdb.texinfo (Library List Format): Update to mention the
	possibility to pass section addresses instead of segment
	addresses.

2008-03-10  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (Starting): Document "set exec-wrapper".
	(Server): Document gdbserver --wrapper.

2008-03-03  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (Set Watchpoints): Mention watchpoints on
	unreadable memory.  Delete obsolete SPARClite reference.

2008-02-28  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (Starting): Mention always-running targets.
	(Target Commands): Add an anchor for load.
	(Connecting): Explain continue instead of run.

2008-02-27  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (Debugging Output): Document "set debug timestamp".

2008-02-26  Nick Roberts  <[email protected]>

	* gdb.texinfo (Set Breaks): Revert description of Enb column of
	breakpoint table.

2008-02-19  Pedro Alves  <[email protected]>

	* gdb.texinfo (vAttach, vRun): Remove requirement of the stub
	killing the inferior when it is already debugging a process.

2008-02-13  Markus Deuling  <[email protected]>

	* gdbint.texinfo (Build Script): New section. Mention new build script
	gdb_buildall.sh.

2008-02-01  Jim Blandy  <[email protected]>

	* gdb.texinfo (Help): Summarize 'info args' correctly.

2008-01-30  Thiago Jung Bauermann  <[email protected]>

	* gdb.texinfo: (Decimal Floating Point): Mention pseudo-registers
	available in PowerPC architecture.
	(Embedded Processors): Change node name of PowerPC item in menu.
	(PowerPC): Rename to...
	(PowerPC Embedded): this.
	(Architectures): Add new PowerPC item in menu.
	(PowerPC): New node.

2008-01-30  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (Multi-Process Mode for gdbserver): Use @kbd for
	commands.

2008-01-30  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (Setting Catchpoints): Mention features
	supported on GNU/Linux.

2008-01-30  Nick Roberts  <[email protected]>

	* gdb.texinfo (GDB/MI File Commands): Describe new output
	field for MI command -file-list-exec-source-file.

2008-01-29  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (Using the `gdbserver' Program): Add security
	warning.  Rearrange into subsections and subsubsections.  Document
	--multi and --debug.  Correct --with-sysroot typo.  Update --attach
	usage.  Make load reference clearer.  Document monitor exit.
	(Remote Configuration): Document set remote exec-file, attach-packet,
	and run-packet.
	(Packets): Document vAttach and vRun.

2008-01-29  Nick Roberts  <[email protected]>

	* gdb.texinfo (Processes): Mention process command.
 	detach-on-follow -> detach-on-fork.

2008-01-28  Daniel Jacobowitz  <[email protected]>

	* gdbint.texinfo (Native Conditionals): Remove
	SHELL_COMMAND_CONCAT and SHELL_FILE.

2008-01-26  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Specify Location): Improve wording.

2008-01-23  Chris Demetriou  <[email protected]>

	* gdb.texinfo (Threads): Document new "set print thread-events"
	and "show print thread-events" commands.

2008-01-19  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Specify Location): New section.
	(Delete Breaks, Edit, Set Breaks): Remove description of
	locations.  Instead, add a reference to "Specify Location".
	(Machine Code, Jumping, Thread Stops, Continuing and Stepping)
	(Symbols): Refer to "Specify Location" for the valid forms of
	linespecs and locations.

2008-01-18  Markus Deuling  <[email protected]>

	* gdbint.texinfo (Target Conditionals): Replace the description of
	BITS_BIG_ENDIAN with a description of gdbarch_bits_big_endian.

2008-01-12  Paul Hilfinger  <[email protected]>

	* gdb.texinfo (C Operators): Remove incorrect parenthetical comment
	about &&var, which is rejected by the expression parser.

2008-01-09  Luis Machado  <[email protected]>

	* gdb.texinfo (Output): Update documentation on using printf with DFP
	types.

2008-01-07  Thiago Jung Bauermann  <[email protected]>

	* gdb.texinfo (C and C++): Add Decimal Floating Point format
	subsubsection.
	(Decimal Floating Point format): New subsubsection.

2008-01-05  Pedro Alves  <[email protected]>

	* gdb.texinfo (File Options): Remove mention of the attempt to
	open a core file with the -p option.  Don't list -c as a valid
	option to attach to a process.

2008-01-05  Pedro Alves  <[email protected]>

	* gdbint.texinfo (Host Conditionals): Remove mention of
	ALIGN_STACK_ON_ENTRY.

2008-01-05  Joel Brobecker  <[email protected]>

	* gdbint.texinfo (Start of New Year Procedure): Add item
	describing how to update the source and documentation copyright
	notices.

2007-12-18  Jim Blandy  <[email protected]>

	* gdb.texinfo (Set Watchpoints): Integrate per-thread
	watchpoint explanation into the main description of the watchpoint
	command; update synopses of 'watch', 'rwatch', and 'awatch'
	commands.

2007-12-18  Vladimir Prus  <[email protected]>

	* gdb.texinfo (Miscellaneous gdb/mi Commands):
	Document 'pending-breakpoints' feature of
	-list-features.

2007-12-17  Luis Machado  <[email protected]>

	* doc/gdb.texinfo: Add new parameter's description.

2007-12-16  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (Overview): Clarify run-length encoding
	example.  Remove the restriction on "+" and "-" characters.

2007-12-15  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Host I/O Packets): Fix xref syntax.

2007-12-14  Vladimir Prus  <[email protected]>
	
	* gdb.texinfo (GDB/MI Breakpoint Commands): Document
	the -f option for -break-insert, remove -r option,
	and clarify specification of location.

2007-11-30  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (Debugging Programs with Multiple Processes): Correct
	formatting.
	(Remote Debugging): Add File Transfer section.
	(Remote Configuration): Document Host I/O packets.
	(GDB/MI): Add GDB/MI File Transfer Commands section.
	(Host I/O Packets): New section in "Remote Protocol".
	(Packets): Add vFile.

2007-11-17  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Set Breaks, Disabling): Clarify behavior of
	breakpoints with multiple locations.
	(Breakpoint Menus): Improve wording.
	(Output): Fix last change.

2007-11-17  Ulrich Weigand  <[email protected]>

	* Makefile.in (Makefile): Do not depend on target_makefile_frag.

2007-11-15  Doug Evans  <[email protected]>

	* gdb.texinfo (Symbols): Update output of "maint info symtabs".

2007-11-15  Vladimir Prus  <[email protected]>

	* gdbint.texinfo (Native Conditionals): Remove
	mention of CLEAR_SOLIB.
	
2007-11-11  Joel Brobecker  <[email protected]>

	* gdb.texinfo (Print Settings): Add documentation for "set/show
	print frame-arguments".

2007-11-05  Luis Machado  <[email protected]>

	* gdb.texinfo (Output): Update printf command's description.

2007-10-30  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (PowerPC): Document "set powerpc vector-abi" and "set
	powerpc soft-float".

2007-10-24  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (Files): Correct formatting.  Mention Expat
	requirement.
	(Requirements for Building GDB): Expand the list of Expat
	uses.
	(Library List Format, Memory Map Format): Mention Expat.
	(Target Descriptions): Update Expat wording.

2007-10-24  Daniel Jacobowitz  <[email protected]>

	* gdbint.texinfo (Register and Memory Data, Target Conditionals):
	Document that gdbarch_convert_register_p should return zero for no-op
	conversions.

2007-10-22  Ulrich Weigand  <[email protected]>

	* gdbint.texi (Compiler Characteristics): Move documentation
	of set_gdbarch_sofun_address_maybe_missing back to ...
	(Target Conditionals): ... here to fix build break.

2007-10-19  Ulrich Weigand  <[email protected]>

	* gdbint.texi (Target Conditionals): Remove documentation of
	SOFUN_ADDRESS_MAYBE_MISSING, replaced by ...
	(Compiler Characteristics): ... documentation of
	set_gdbarch_sofun_address_maybe_missing.

2007-10-17  Daniel Jacobowitz  <[email protected]>

	* gdbint.texinfo (Target Conditionals): Use
	frame_unwind_register_unsigned in examples instead of
	frame_unwind_unsigned_register.

2007-10-15  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (Predefined Target Types): Add int128
	and uint128.
	(Standard Target Features): Add PowerPC features.

2007-10-15  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (Maintenance Commands): Document "maint print c-tdesc".

2007-10-12  Ulrich Weigand  <[email protected]>

	* gdbint.texi (Target Conditionals): Remove documentation
	of and references to DEPRECATED_EXTRACT_STRUCT_VALUE_ADDRESS,
	gdbarch_extract_return_value, and gdbarch_store_return_value.

2007-10-12  Ulrich Weigand  <[email protected]>

	* gdbint.texi (Target Conditionals): Remove documentation of
	and references to DEPRECATED_REG_STRUCT_HAS_ADDR.

2007-10-11  Kazu Hirata  <[email protected]>

	* gdb.texinfo: Mention that inaccessible-by-default is on by
	default.

2007-10-11  Daniel Jacobowitz  <[email protected]>

	* gdbint.texinfo (Target Conditionals): Remove VARIABLES_INSIDE_BLOCK.

2007-09-30  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (Setting Watchpoints): Adjust warning text about
	multi-threaded watchpoints.
	* gdbint.texinfo (Watchpoints): Describe how watchpoints are
	checked.  Describe sticky notification.  Expand description
	of steppable and continuable watchpoints.
	(Watchpoints and Threads): New subsection.

2007-09-28  Vladimir Prus  <[email protected]>

	* gdb.texinfo (Setting Breakpoints): Revise
	documentation for pending breakpoints.  Document
	breakpoints with multiple locations.
	
2007-09-19  Vladimir Prus  <[email protected]>

	* gdb.texinfo (Miscellaneous gdb/mi Commands):
	Document -list-features.
	
2007-09-15  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Output): Spell out which features of C's printf are
	not supported by GDB's printf.
	(Separate Debug Files): More accurate wording regarding build ID
	and a reference to the ld manual rather than the Fedora wiki.

2007-09-04  Daniel Jacobowitz  <[email protected]>
	    Jim Blandy  <[email protected]>

	* gdb.texinfo (Output Formats): Update 'c' description.  Describe 's'.
	(Examining Memory): Update mentions of the 's' format.
	(Automatic Display): Likewise.

2007-09-02  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo: Update the FSF's Back-Cover Text.

2007-09-02  Jan Kratochvil  <[email protected]>
	    Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Separate Debug Files): Cosmetic quoting removal.
	Fixed the ``build ID'' name.  New binaries build instructions for the
	build ID inclusion.  Explain how the commands are specific to the build
	ID vs. debug link.

2007-09-01  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Separate Debug Files): Fix last change.  Add
	indexing for ``build ID'' support.

2007-09-01  Jan Kratochvil  <[email protected]>

	* gdb.texinfo (Separate Debug Files): Included a BUILD ID description.
	Enlisted BUILD ID to the debug file searching example.
	Included a BUILD ID `.note.gnu.build-id' section description.
	Updated/added the debug files splitting instructions for OBJCOPY.

2007-08-31  Vladimir Prus  <[email protected]>

	* gdb.texinfo (Variable Objects): Adjust docs
	for -var-info-expression and document
	-var-info-path-expression.

2007-08-20  Jim Blandy  <[email protected]>

	* gdb.texinfo (Top): Dedicate manual to the memory of Fred Fish.
	(title page): Include the dedication in the printed manual, as a
	separate page after the copyright notice.
	
	* gdb.texinfo (The F Reply Packet): Avoid confusing texi2html:
	don't break a @var across a line.

2007-07-25  Maciej W. Rozycki  <[email protected]>

	* Makefile.in (MAKEHTMLFLAGS): Also search the current directory
	for include files.

2007-07-12  Nick Roberts  <[email protected]>

	* gdb.texinfo (Server Prefix): New node.  Adapt from existing node
        in annotate.texinfo.
        (Command History): Link to new node.

2007-07-05  Markus Deuling  <[email protected]>

	* gdbint.texinfo (PC_LOAD_SEGMENT): Remove description.

2007-07-05  Eli Zaretskii  <[email protected]>

	* gdbint.texinfo (Target Conditionals): Fix last change.

2007-07-03  Markus Deuling  <[email protected]>

	* gdb.texinfo: Replace following macros by their appropriate gdbarch
	routines:
	(TARGET_CHAR_SIGNED, CALL_DUMMY_LOCATION, CANNOT_FETCH_REGISTER)
	(CANNOT_STORE_REGISTER, GET_LONGJMP_TARGET, POINTER_TO_ADDRESS)
	(ADDRESS_TO_POINTER, INNER_THAN, FRAME_NUM_ARGS)
	(HAVE_NONSTEPPABLE_WATCHPOINT, TARGET_SHORT_BIT, TARGET_INT_BIT)
	(TARGET_LONG_BIT, TARGET_LONG_LONG_BIT, TARGET_FLOAT_BIT)
	(TARGET_DOUBLE_BIT, TARGET_LONG_DOUBLE_BIT, TARGET_PTR_BIT
	(TARGET_ADDR_BIT, SP_REGNUM, PC_REGNUM, PS_REGNUM, FP0_REGNUM)
	(STAB_REG_TO_REGNUM, ECOFF_REG_TO_REGNUM, DWARF_REG_TO_REGNUM)
	(SDB_REG_TO_REGNUM, DWARF2_REG_TO_REGNUM, BELIEVE_PCC_PROMOTION)
	(CONVERT_REGISTER_P, REGISTER_TO_VALUE, VALUE_TO_REGISTER)
	(POINTER_TO_ADDRESS, ADDRESS_TO_POINTER, EXTRACT_RETURN_VALUE)
	(STORE_RETURN_VALUE, SKIP_PROLOGUE, MEMORY_INSERT_BREAKPOINT)
	(BREAKPOINT_FROM_PC, MEMORY_REMOVE_BREAKPOINT, DECR_PC_AFTER_BREAK)
	(ADDR_BITS_REMOVE, TARGET_PRINT_INSN, SKIP_TRAMPOLINE_CODE)
	(IN_SOLIB_RETURN_TRAMPOLINE, NAME_OF_MALLOC, ADDRESS_CLASS_TYPE_FLAGS)
	(ADDRESS_CLASS_TYPE_FLAGS_TO_NAME, ADDRESS_CLASS_TYPE_FLAGS_P).
	(ADDRESS_CLASS_NAME_to_TYPE_FLAGS, ADJUST_BREAKPOINT_ADDRESS)
	(PRINT_FLOAT_INFO, PRINT_VECTOR_INFO, INTEGER_TO_ADDRESS)
	(SKIP_PERMANENT_BREAKPOINT, TARGET_VIRTUAL_FRAME_POINTER)
	(SOFTWARE_SINGLE_STEP_P)

	(push_dummy_call, stabs_argument_has_addr, unwind_sp, unwind_pc)
	(print_registers_info, push_dummy_code, unwind_dummy_id): Rework

	(REGISTER_CONVERT_TO_TYPE, END_OF_TEXT_DEFAULT, GDB_MULTI_ARCH)
	(GDB_TARGET_IS_HPPA, DEPRECATED_GET_SAVED_REGISTER)
	(SYMBOLS_CAN_START_WITH_DOLLAR, DEPRECATED_INIT_EXTRA_FRAME_INFO)
	(DEPRECATED_INIT_FRAME_PC, DEPRECATED_SIGTRAMP_START)
	(IN_SOLIB_CALL_TRAMPOLINE, NO_HIF_SUPPORT, REGISTER_CONVERTIBLE)
	(DEPRECATED_REGISTER_RAW_SIZE, PARM_BOUNDARY, DEPRECATED_STACK_ALIGN)
	(PROLOGUE_FIRSTLINE_OVERLAP, DEPRECATED_POP_FRAME, STEP_SKIPS_DELAY)
	(TARGET_COMPLEX_BIT, TARGET_DOUBLE_COMPLEX_BIT)
	(OS9K_VARIABLES_INSIDE_BLOCK, KERNEL_U_ADDR, KERNEL_U_ADDR_HPUX)
	(REGISTER_U_ADDR, U_REGS_OFFSET, DEBUG_PTRACE): Remove description.

	(Converting an existing Target Architecture to Multi-arch): Remove
	 section.

	(gdbarch_unwind_pc, gdbarch_unwind_sp): Renew code example.
	(gdbarch_addr_bits_remove): Add code example.

	* gdb.texinfo: Replace REGISTER_NAME by gdbarch_register_name.

2007-07-02  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (Remote Configuration): Document library-info-packet.
	Add other missing entries.  Adjust the table size to fit.
	(Stop Reply Packets): Use @itemize instead of @enumerate.  Document
	stop reasons including the new "library" event.
	(General Query Packets): Adjust table widths for qSupported.  Mention
	qXfer:libraries:read reply to qSupported and document the new packet.
	(Library List Format): New section.

2007-07-01  Jan Kratochvil  <[email protected]>

	* gdb.texinfo (Attach): Fixed GDB exit inferior detachment.

2007-06-28  Michael Snyder  <msnyder@svkmacdonelllnx>

	* gdbint.texinfo (Table, Tuple and List Functions) Fix typo.

2007-06-25  Nick Roberts  <[email protected]>

	* gdbint.texinfo (Register and Memory Data): Break sections
	into nodes and add a menu.

2007-06-21  Maciej W. Rozycki  <[email protected]>

	* gdb.texinfo (Examining Memory): Document the new behaviour.

2007-06-21  Vladimir Prus  <[email protected]>

	* gdb.texinfo (Standard Target Features): Document
	m68k features.

2007-06-18  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (General Query Packets): Document qOffsets changes.

2007-06-13  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (Target Description Format): Add version attribute
	for <target>.

2007-06-13  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (MIPS Features): Document org.gnu.gdb.mips.linux.

2007-06-13  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (MIPS Features): New subsection.

2007-06-12  Ulrich Weigand  <[email protected]>
	    Markus Deuling  <[email protected]>

	* gdb.texinfo (General Query Packets): Document qXfer:spu:read
	and qXfer:spu:write packets and mention them under qSupported.

2007-06-12  Ulrich Weigand  <[email protected]>
	    Markus Deuling  <[email protected]>

	* gdb.texinfo (Architectures): Add new SPU section to document
	Cell Broadband Engine SPU architecture specific commands.

2007-06-09  Vladimir Prus  <[email protected]>

	* gdb.texinfo (GDB/MI Variable Objects): Editorial
	comments.

2007-06-07  Nick Roberts  <[email protected]>

	* gdb.texinfo (Emacs): Describe GDB under Emacs 22.1.

2007-05-29  Jim Blandy  <[email protected]>

	* gdb.texinfo (Overview): Doc fix.

2007-05-22  Maciej W. Rozycki  <[email protected]>

	* gdb.texinfo (Remote Configuration): Document "set/show
	remoteflow".

2007-05-16  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (MIPS): Remove documentation for set mips
	saved-gpreg-size, show mips saved-gpreg-size, and set mips
	stack-arg-size.

2007-05-14  Bob Wilson  <[email protected]>
	
	* all-cfg.texi (GDBTUI): New.
	* gdb.texinfo (Mode Options): Use GDBTUI variable.
	(TUI, TUI Overview, TUI Keys, TUI Single Key Mode, TUI Commands)
	(TUI Configuration): Edit to improve clarity and fix problems of
	both style and content.
	
2007-05-11  Ulrich Weigand  <[email protected]>

	* observer.texi (GDB Observers): New observer "new_objfile".

2007-05-08  Ulrich Weigand  <[email protected]>

	* gdbint.texinfo (Native Conditionals): Remove USE_PROC_FS.

2007-04-14  Vladimir Prus  <[email protected]>

	* gdb.texinfo (GDB/MI Variable Objects): Document
	frozen variables objects.
	
2007-04-13  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (Memory): Reference Remote Debugging chapter.
	(Character Sets, Caching Data of Remote Targets): Likewise.
	(Targets): Delete Remote node.  Move its text...
	(Debugging Remote Programs): ...to here.  Delete description
	of the "remote" command.
	(Remote configuration): Delete description of "set remotedevice"
	and "show remotedevice".
	(Embedded Processors): Delete H8/300, H8/500, and SH nodes.

2007-04-11  Bob Wilson  <[email protected]>

        * gdb.texinfo (Contributors, Continuing and Stepping)
        (Fortran Defaults, HPPA, TUI, TUI Commands, Configure Options)
        (General Query Packets, File-I/O Remote Protocol Extension)
        (Protocol Basics, The F Reply Packet, Write)
        (Protocol-specific Representation of Datatypes, Memory Transfer):
        Fix hyphenation, punctuation and grammar problems.
        (Cygwin Native): Likewise.  Also fix misuse of @pxref and use
        'section' instead of 'subsection' in the text.
        (Non-debug DLL Symbols): Avoid 'subsubsection' in the text.
        (i386): Remove period from section name.
	(Installing GDB, Requirements, Running Configure,  Separate Objdir)
	(Config Names, Configure Options): Use @file{configure}.

2007-04-11  Daniel Jacobowitz  <[email protected]>

	* gdbint.texinfo (Writing Tests): Mention gdb_test_multiple
	and tab expansion.

2007-04-10  Daniel Jacobowitz  <[email protected]>

	* gdbint.texinfo (SOM): Correct location of the SOM reader.

2007-04-02  Bob Wilson  <[email protected]>
	
	* gdb.texinfo: Consistently capitalize all significant words in
	node names, chapter titles, section titles, and headings.  Update
	cross references to match.
	(Starting and Stopping Trace Experiment): Make node name plural.
	(Breakpoint related warnings): Hyphenate "Breakpoint-related".
	
2007-03-30  Pedro Alves  <[email protected]>

	* gdb.texinfo (WinCE): Delete obsolete subsection.

2007-03-30  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (M68K): Remove obsolete ROM monitors.
	* gdbint.texinfo (DWARF 1): Delete section and other dwarfread.c
	references.

2007-03-30  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (Startup): Delete references to some alternate
	names for .gdbinit.
	(Thread): Remove LynxOS reference.
	(Tandem ST2000): Delete target-specific documentation.
	* gdbint.texinfo (Symbol Handling): Remove mention of NLM.
	(Target Architecture Definition): Remove mention of GDB_OSABI_NETWARE
	and GDB_OSABI_LYNXOS.

2007-03-29  Ulrich Weigand  <[email protected]>

	* gdbint.texi (Native Conditionals): Remove PTRACE_ARG3_TYPE.

2007-03-27  Ulrich Weigand  <[email protected]>

	* gdbint.texinfo (Target Conditionals): Remove mention of
	DEPRECATED_REMOTE_BREAKPOINT, DEPRECATED_BIG_REMOTE_BREAKPOINT,
	and DEPRECATED_LITTLE_REMOTE_BREAKPOINT.

2007-03-27  Brooks Moses  <[email protected]>

	* Makefile.in: Add "pdfdir" installation
	directory, PDFTEX macro, support for "install-pdf" target,
	and rules for making a pdf version of refcard.texi.
	* refcard.tex: Specify paper size for PDF output.

2007-03-26  Bob Wilson  <[email protected]>
	
	* gdb.texinfo (Omissions from Ada, Additions to Ada): Wrap long lines.
	
2007-03-26  Bob Wilson  <[email protected]>
	
	* gdb.texinfo (Invoking GDB): Use @value{GDBP}.
	(Source Path, Character Sets, Macros, Define)
	(GDB/MI Result Records, GDB/MI Simple Examples)
	(GDB/MI Program Execution, GDB/MI File Commands)
	(Maintenance Commands, Packets, File-I/O Overview): Use @value{GDBN}.
	(Bug Reporting): Use @value{GCC}.
	
2007-03-26  Bob Wilson  <[email protected]>
	
	* gdb.texinfo (Help): Fix formatting of examples.
	(Variables): Use @ifnotinfo instead of @iftex.
	(Non-debug DLL symbols): Use @ref instead of @pxref.
	(Sparclet File): Use @samp instead of quotes.
	
2007-03-26  Bob Wilson  <[email protected]>

	* gdb.texinfo (Variables, C): Update cross reference to GCC docs.

2007-03-26  Bob Wilson  <[email protected]>

	* gdb.texinfo (Top): Move TUI and Annotations menu entries to match
	the order of the nodes.
	(C Operators, C Constants, Debugging C): Remove extra menus.
	(Method Names in Commands): Do not specify next/prev/up nodes.
	
2007-03-26  Bob Wilson  <[email protected]>

	* gdb.texinfo (File Options): Add missing parenthesis.
	(Breakpoints, Special Fortran commands, PowerPC): Fix typos.

2007-02-26  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (Monitor commands for gdbserver): New subsection.

2007-02-26  Daniel Jacobowitz  <[email protected]>

	* src/gdb/doc/gdb.texinfo (Standard Target Features): Mention
	case insensitivity.
	(ARM Features): Describe org.gnu.gdb.xscale.iwmmxt.

2007-02-18  Nick Roberts  <[email protected]>

	* gdb.texinfo (Top): Put Appendix A after numbered sections.
	(Files): Add section name to argument list for pxref.
	(Non-debug DLL symbols): Don't use `see' for pxref.
	(Embedded Processors): Fix typo.
	(GDB/MI Breakpoint Commands): Execution commands generate
	*stopped not ^done.

2007-02-13  Nick Roberts  <[email protected]>

	* gdb.texinfo (GDB/MI Variable Objects): Describe meanings of
	values for in_scope.  Mention that only root variables can be
	updated.
	(GDB/MI Development and Front Ends): Explain new values may be
	added to existing fields.

2007-02-08  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (-target-disconnect): Use @smallexample.
	(Requirements): Add anchor for Expat.  Update description.
	(Target Descriptions): Mention Expat.
	(Target Description Format): Document new elements.  Use
	@smallexample.
	(Predefined Target Types, Standard Target Features): New sections.
	* doc/gdbint.texinfo (Target Descriptions): New section.

2007-02-07  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (Target Description Format): Add section on XInclude.

2006-02-03  Nick Roberts  <[email protected]>

	* gdb.texinfo (GDB/MI Miscellaneous Commands): Describe the new
	command -enable-timings.

2007-02-02  Markus Deuling  <[email protected]>  (tiny change)

        * gdbint.texinfo (Operation System ABI Variant Handling): Update
	descriptions for new/deleted elements in gdb_osabi.  Add missing
	description for function generic_elf_osabi_sniff_abi_tag_sections.

2007-01-29  Joel Brobecker  <[email protected]>

	* gdb.texinfo (Maintenance Commands): Add documentation for
	the new "maint print target-stack" command.

2007-01-26  Jan Kratochvil <[email protected]>
	    Eli Zaretskii  <[email protected]>

	* gdb.texinfo: Describe CHAR array vs. string identification rules.

2007-01-26  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Compilation, Files, Bootstrapping, Bug Reporting):
	Use @value{NGCC} instead of @value{GCC}.

2007-01-20  Ralf Wildenhues  <[email protected]>  (tiny change)

	* agentexpr.texi: Fix typos.
	* annotate.texinfo: Likewise.
	* gdb.texinfo: Likewise.
	* gdbint.texinfo: Likewise.
	* observer.texi: Likewise.
	* stabs.texinfo: Likewise.

2007-01-20  Markus Deuling  <[email protected]>  (tiny change)

	* gdbint.texinfo (Support Libraries): Remove mmalloc
	entry.  Describe readline library.

2007-01-09  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (Target Descriptions): New section.
	(General Query Packets): Add QPassSignals anchor.  Mention
	qXfer:features:read under qSupported.  Expand mentions of
	qXfer:memory-map:read and QPassSignals.  Document
	qXfer:features:read.

2007-01-08  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (Commands to specify files): Describe
	"set sysroot" and "show sysroot".
	(Using the `gdbserver' program): Lowercase argument
	to @var.  Expand description of setting up GDB on the
	host.

2007-01-05  Joel Brobecker  <[email protected]>

	* gdb.texinfo (Set Catchpoints): Add documentation for the new
	catch exception, catch exception unhandled, and catch assert
	commands.

2007-01-04  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (Debugging Output): Document "set debug xml"
	and "show debug xml".

2007-01-04  Daniel Jacobowitz  <[email protected]>

	* gdbint.texinfo (Compiler Warnings): Update for -Wall use.

2007-01-01  Joel Brobecker  <[email protected]>

	* gdbint.texinfo (Start of New Year Procedure): Add missing item.

2006-12-08  Vladimir Prus  <[email protected]>

	* gdb.texinfo (GDB/MI Variable Objects): Wrap historical
	note in @ignore, to be removed later if nobody complains.

2006-12-04  Nick Roberts  <[email protected]>

	* gdb.texinfo (GDB/MI Variable Objects): Describe -c option
	of -var-delete.

2006-11-22  Vladimir Prus  <[email protected]>
        
	* gdb.texinfo (Setting breakpoints): Document
        automatic software/hardware breakpoint usage and
        the "set breakpoint auto-hw" command.

2006-11-21  Vladimir Prus  <[email protected]>

	* gdb.texinfo (Memory Access Checking): New.

2006-11-16  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (Remote configuration): Mention
	"pass-signals-packet".
	(General Query Packets): Document QPassSignals.  Fix
	a typo.

2006-11-14  Maxim Grigoriev  <[email protected]>

	* gdb.texinfo (Contributors): Add contributors of Xtensa port.

2006-11-14  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (Remote configuration): Rewrite documentation for
	packet configuration commands.
	(OS Information): Adjust reference to qXfer:auxv:read.
	(General Query Packets): Remove references to read-aux-vector-packet
	and set remote get-thread-local-storage-address.

2006-11-10  Daniel Jacobowitz  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Add new
	Initializing a New Architecture section.

2006-10-31  David Taylor  <[email protected]>

	* stabs.texinfo (Macro define and undefine): New node describing
	stabs for #define and #undef.

2006-10-27  Andreas Schwab  <[email protected]>

	* gdb.texinfo (Processes): Rename "detach-fork" to "detach fork".

2006-10-21  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Breakpoints, Set Watchpoints): Elaborate and
	clarify on the possible meanings of ``expression'' watched by
	watchpoints.  Add indexing.
	(Prompting, Errors, Invalidation, Annotations for Running)
	(Source Annotations): Fix index entries by adding "annotation" to
	them, to discriminate from index entries that point to the more
	general topic descriptions.

2006-10-17  Daniel Jacobowitz  <[email protected]>

	* gdbint.texinfo (Target Vector Definition): Move most
	content into Existing Targets.  Add a menu.
	(Existing Targets): New section, moved from Target Vector
	Definition.  Use @subsection.
	(Managing Execution State): New section.

2006-10-16  Bob Wilson  <[email protected]>

	* gdb.texinfo (ST2000): Use Ctrl- instead of C-.

2006-10-15  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Sample Session, Invocation, Quitting GDB)
	(Command Syntax, Signals, Backtrace, Connecting)
	(Remote configuration, Renesas Boards, Console I/O): Fix last
	change: use Ctrl- instead of C-, except wrt Emacs.
	(File-I/O Examples): Put Ctrl-c in @kbd.
	(Cygwin Native, File-I/O Overview, The Ctrl-C message)
	(Console I/O): Use @samp with Ctrl-.
	(Signals, Set Breaks, Set Watchpoints): Document optional
	arguments to `info signals'  `handle', `info breakpoints', and
	`info watchpoints'.

2006-10-14  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Backtrace): Fix last change.

2006-10-14  Nick Roberts  <[email protected]>

	* gdb.texinfo (Backtrace): Order correctly and add other cases.

2006-10-10  Bob Wilson  <[email protected]>

	* gdb.texinfo (Command Syntax, Connecting, Remote configuration)
	(Renesas Boards, ST2000, TUI Keys, TUI Single Key Mode)
	(TUI Commands, Emacs, Console I/O): Fix @key and @kbd usage.

2006-09-21  Vladimir Prus  <[email protected]>
	    Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (Packets): Document vFlashErase,
	vFlashWrite and vFlashDone packets.
	(General Query Packets): Document qXfer:memory-map:read.
	Add a new feature for qXfer:memory-map:read.
	(Memory map format): New section.
	(Target Commands): Mention that gdb can write flash.

2006-09-21  Vladimir Prus  <[email protected]>
	    Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (Memory Region Attributes): Mention target-supplied
	memory regions and "mem auto".

2006-09-21  Nathan Sidwell  <[email protected]>

	* gdbint.texinfo (Array Containers): New section.

2006-09-17  Vladimir Prus  <[email protected]>

	* gdb.texinfo (GDB/MI Stack Manipulation): Mention that
	-stack-list-arguments HIGH_FRAME argument can be larger then the
	actual number of frames.

2006-09-07  Vladimir Prus  <[email protected]>

	* gdb.texinfo (GDB/MI Stack Manipulation): Mention that
        -stack-list-locals HIGH_FRAME argument can be larger then the
        actual number of frames.

2006-09-02  Bob Wilson  <[email protected]>

	* gdb.texinfo (Packets, Stop Reply Packets, General Query Packets,
	Register Packet Format, Tracepoint Packets): Fix spelling errors.

2006-09-02  Eli Zaretskii  <[email protected]>

	* gdbint.texinfo (Overall Structure): New section "Source Tree
	Structure".

2006-08-17  Jim Blandy  <[email protected]>

	* gdb.texinfo (Stop Reply Packets): Note similarity of 'S' and 'T'
	responses.

2006-08-08  Joel Brobecker  <[email protected]>

	* gdb.texinfo (Source Path): Add documentation for new
	substitute-path commands.

2006-08-08  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (Installing GDB): Update menu.  Move text to...
	(Running Configure): ...here.
	(Requirements): New node.  Mention expat.

2006-08-08  Vladimir Prus  <[email protected]>

	* gdb.texinfo (Target Commands): Remove 
	'set download-write-size' and 'show download-write-size'.

2006-08-01  Daniel Jacobowitz  <[email protected]>

	* stabs.texinfo (Member Type Descriptor): Correct example for
	pointer to member types.

2006-07-21  Andrew Stubbs  <[email protected]>

	* gdb.texinfo (Optional warnings and messages): Add
	'set/show trace-commands'.
	(Command files): Add '-v' to source command.

2006-07-12  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (OS Information): Update qPart reference to
	qXfer.
	(Remote configuration): Likewise.
	(Overview): Move @cindex to the start of a paragraph.  Talk
	about binary data encoding.
	(Packets): Refer to the overview for the details of the X
	packet encoding.
	(General Query Packets): Remove qPart description.  Add qXfer
	description.  Add an anchor to qSupported.  Correct feature
	table title.  Add a new feature for qXfer:auxv:read.
	(Interrupts): Add a missing parenthesis.

2006-07-05  Daniel Jacobowitz  <[email protected]>

	* doc/gdb.texinfo (KOD): Remove node.
	(GDB/MI Kod Commands): Remove commented out node.

2006-07-01  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (GDB/MI Output Syntax, GDB/MI Simple Examples)
	(GDB/MI Breakpoint Commands, GDB/MI Program Context)
	(GDB/MI Thread Commands, GDB/MI Program Execution)
	(GDB/MI Stack Manipulation, GDB/MI Variable Objects)
	(GDB/MI Data Manipulation, GDB/MI Symbol Query)
	(GDB/MI File Commands, GDB/MI Target Manipulation)
	(GDB/MI Miscellaneous Commands): Change (@value{GDBP})->(gdb),
	since the MI prompt is hard-wired into the code.

2006-07-01  Nick Roberts  <[email protected]>

	* gdb.texinfo (GDB/MI Compatibility with CLI): Qualify more carefully.
	(GDB/MI Simple Examples): Use @subheading for "A Bad Command".
	(GDB/MI Data Manipulation): Remove description of unimplemented
	display related commands as variable objects perform this function
	and are superior: -display-delete, -display-disable,
	-display-enable, -display-insert and -display-list.  Move
	-environment-cd, -environment-directory, -environment-path
	and -environment-pwd to "Program Context".
	(GDB/MI Program Control): Rename to "Program Execution".  Move
	-exec-arguments -exec-abort to...
	(GDB/MI Program Context): ...here.  New node split from "Data
	 Manipulation".

2006-06-21  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (Remote configuration): Document set / show
	remote supported-packets.
	(General Query Packets): Document qSupported packet.

2006-06-10  Sandra Loosemore <[email protected]>

	* gdb.texinfo (File-I/O overview): Copy edit for grammar, spelling,
	and font markup.
	(Protocol basics): Likewise.
	(The F request packet): Likewise.
	(The F reply packet): Likewise.
	(Memory transfer): Move this node to be a subsubsection of
	"Protocol specific representation of datatypes".
	(The Ctrl-C message): More copy editing.
	(Console I/O): Likewise.
	(The isatty call): Delete this node, and merge its content into
	the "isatty" node.  Fixed references elsewhere.
	(The system call): Delete this node, and merge its content into
	the "system" node.  Fixed references elsewhere.
	(open): Reformat to use @table, and add appropriate font markup.
	(close): Likewise.
	(read): Likewise.
	(write): Likewise.
	(lseek): Likewise.
	(rename): Likewise.
	(unlink): Likewise.
	(stat/fstat): Likewise.
	(gettimeofday): Likewise.
	(isatty): Likewise.
	(system): Likewise, plus minor changes to fix confusing wording.
	(Integral datatypes): Fix font markup.
	(Pointer values): Likewise.
	(struct stat): Fix markup to use @table, plus minor copy editing.
	(struct timeval): Fix font markup, plus minor copy editing.
	(Constants): Minor copy editing.
	(Errno values): Add font markup.
	(File-I/O Examples): Likewise.

2006-06-10  Nick Roberts  <[email protected]>

	* gdb.texinfo (GDB/MI): Remove duplicate acknowledgements.
	(GDB/MI Simple Examples): Move node up one level.  Use real
	examples.
	(GDB/MI Compatibility with CLI): Update.
	(GDB/MI Result Records): Add "connected" and "exit" result
	classes.
	(GDB/MI Stream Records): Clarify target output.
	(GDB/MI Command Description Format): Modify example description.
	(GDB/MI Breakpoint Table Commands): Rename to...
	(GDB/MI Breakpoint Commands): ...this
	(GDB/MI Breakpoint Commands): Add optional thread field.
	(GDB/MI Program Control): Add an introduction.  Move "Program
	termination" examples into exec-run description.
	(GDB/MI File Commands): Mention similar CLI commands.
	(GDB/MI Miscellaneous Commands): Move to end.  Mention "show version"
	is similar to "-gdb-version".

2006-06-09  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Symbols): Fix "(gdb)"=>"(@value{GDBP})".

2006-06-02  Nick Roberts  <[email protected]>

	* gdb.texinfo (GDB/MI Development and Front Ends): Use
	sourceware.org for mailing lists.
	(GDB/MI File Commands): New node split from Program Control.

2006-06-01  Nick Roberts  <[email protected]>

	* gdb.texinfo (GDB/MI Development and Front Ends): New node.

2006-05-22  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Cygwin Native): Fix last change.

2006-05-22  Christopher Faylor  <[email protected]>

	* gdb.texinfo (Cygwin Native): Document set/show cygwin-exceptions.

2006-05-15  Nick Roberts  <[email protected]>

	* gdbint.texinfo (Algorithms): Correct spelling and punctuation.
	(Releasing GDB, Testsuite): Remove details for including DejaGnu.

2006-05-14  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (General Query Packets): Recommend not starting
	new packets with qC and clarify.

2006-05-13  Gaius Mulley  <[email protected]>

	* gdb.texinfo (M2 Types): New section.

2006-05-10  Daniel Jacobowitz  <[email protected]>

	* agentexpr.texi: Add a copyright and license notice.
	* observer.texi: Likewise, with GPL clause for function prototypes.
	Remove trailing whitespace.

2006-05-05  Jim Blandy  <[email protected]>

	* gdb.texinfo (General Query Packets): Document conventions for
	terminating packet names, and their violations.

2006-05-05  Daniel Jacobowitz  <[email protected]>

	* Makefile.in (GDB_DOC_SOURCE_INCLUDES): Update for readline 5.1.
	* gdb.texinfo: Likewise.

2006-05-05  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (Remote Configuration): Remove "set remotedebug"
	and "show remotedebug".
	(Debugging Output): Add additional index entries.

2006-04-27  Michael Snyder  <[email protected]>

	* gdb.texinfo (delete-fork): Command renamed to "delete fork".

2006-04-22  Andrew Cagney  <[email protected]>

	* gdb.texinfo (Contributors): Credit frame unwinder contributors.
	* gdbint.texinfo (Algorithms): Fix errors in frame documentation.

2006-04-18  Daniel Jacobowitz  <[email protected]>

	* gdbint.texinfo (x86 Watchpoints, Target Conditionals): Update insert
	and remove breakpoint prototypes.
	(Watchpoints): Move description of target_insert_hw_breakpoint and
	target_remove_hw_breakpoint ...
	(Breakpoints): ... to here.  Document target_insert_breakpoint and
	target_remove_breakpoint.

2006-04-17  Jim Blandy  <[email protected]>

	* gdb.texinfo (Packets): Note that 'addr' arguments to s, S, c,
	and C packets are optional.

2006-04-14  Frederic Riss  <[email protected]>

	* gdb.texinfo (Specifying source directories): Update the description
	of the source file search to reflect the fact that the source path
	always contains at least $cdir and $cwd.

2006-03-31  Michael Snyder  <[email protected]>

	* gdb.texinfo: Update copyright dates.

2006-03-31  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Overview): Add an index entry to "empty response".

2006-03-28  Jim Blandy  <[email protected]>

	* gdbint.texinfo (Prologue Analysis): New section.

2006-03-07  Jim Blandy  <[email protected]>

	* gdb.texinfo (Connecting): Document 'target remote pipe'.

	* gdb.texinfo (Target Commands): Update text describing how to
	specify a target.  Refer to the detailed section on remote
	debugging, not the brief mention.

	* gdb.texinfo (Connecting): Organize the different 'target remote'
	connection methods into a table.  Add a 'target remote' index
	entry. (!!!)

2006-02-17  Fred Fish  <[email protected]>

	* gdb.texinfo (Symbols): Update descriptions of 'whatis' and
	'ptype' commands to reflect the fact that the only significant
	difference between them is that ptype prints the complete type
	description instead of just the name.

2006-02-13  Wu Zhou  <[email protected]>

	* gdbint.texinfo (Watchpoints): Delete
	TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT.

2006-02-10  Nick Roberts  <[email protected]>

	* gdb.texinfo (GDB/MI Breakpoint Table Commands): Add fullname and
	times fields where needed.  Fix typos.  Update general form given
	for output of -break-insert.
	(GDB/MI): Abbreviate some unnecessarily long fullnames.

2006-02-06  Daniel Jacobowitz  <[email protected]>

	* gdbint.texinfo (Symbol Handling): Add a section
	on memory management.

2006-02-06  Vladimir Prus  <[email protected]>

	* gdb.texinfo (Breakpoint table commands): Document the fullname
	field in -break-list output.

2006-02-03  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Cygwin Native): Fix typos.  Clarify the types of
	debugging information produced by the various "set debug..."
	options.

2006-02-01  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (Files): Remove obsolete bits from the description
	of "symbol-file".

2006-01-25  Jim Blandy  <[email protected]>

	* gdbint.texinfo (Testsuite): Explain how to run selected tests.

2006-01-24  Jim Blandy  <[email protected]>

	* gdbint.texinfo (Frames): Document the basics of GDB's register
	unwinding model, and explain the existence of the "sentinel" frame.

2006-01-23  Andrew Stubbs  <[email protected]>

	* gdb.texinfo (Choosing files): Mention that -directory is used
	for script files.
	(Specifying source directories): Likewise.
	(Command files): Explain how script files are found.

2006-01-21  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Backtrace): Describe how to get backtrace of all
	the threads in a multi-threaded program.
	(Threads): The threadno argument of "thread apply" can be a range
	of numbers.

2006-01-18  Jim Blandy  <[email protected]>

	* gdbint.texinfo (Coding): Add entry for -Wno-pointer-sign to list
	of warning flags.

2006-01-13  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Sequences): Improve menu annotations.
	(Define): Add index entries for arguments of user-defined
	commands.  Move the description of flow-control commands...
	(Command Files): ...to here.  Document loop_break and
	loop_continue.
	(Define, Command Files): Document `end' and add index entries for
	it.

2006-01-04  Michael Snyder  <[email protected]>

	* gdb.texinfo: Add documentation for linux-fork.
	* gdbint.texinfo: Add internal documentation for checkpoints. 

2006-01-02  Paul N. Hilfinger  <[email protected]>

	* gdb.texinfo (Omissions from Ada): Document that there is now
	limited aggregate support.

2005-12-28  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Registers): Describe how to refer to SSE and MMX
	registers and the likes.

2005-12-24  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Target Commands, Bug Reporting, File Options)
	(Symbols): Fix usage of "e.g.".
	(Memory Region Attributes): Fix usage of "etc."

	* gdbint.texinfo (libgdb, Symbol Handling, Native Debugging)
	(Coding): Fix usage of "e.g.".

2005-12-23  Eli Zaretskii  <[email protected]>

	* stabs.texinfo: 
	* refcard.tex: 
	* gpl.texi:
	* gdbint.texinfo: 
	* gdb.texinfo: 
	* gdb-cfg.texi: 
	* fdl.texi:
	* annotate.texinfo: 
	* all-cfg.texi: 
	* Makefile.in: Add (C) after Copyright.  Update the FSF
	address.

2005-12-03  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Connecting): Explain that `monitor' is a way to
	extend GDB with commands for external monitor.

2005-12-02  Andrew Stubbs  <[email protected]>

	* gdb.texinfo (Convenience variables): Add init-if-undefined command.

2005-11-25  Joel Brobecker  <[email protected]>

	* gdbint.texinfo (Start of New Year Procedure): New chapter.

2005-11-21  Jim Blandy  <[email protected]>

	* gdb.texinfo (Tracepoint Packets): Document restrictions on
	placement of 'R' actions in tracepoint action packets; document
	dependence of 'X' and 'M' actions on a preceding 'R' action for
	their registers.

2005-11-19  Jim Blandy  <[email protected]>

	* gdb.texinfo (Tracepoint Packets): New node.
	(General Query Packets): Add entries for the tracepoint packets,
	referring to the "Tracepoint Packets" node.
	(Tracepoints): Add reference to "Tracepoint Packets".
	
2005-11-18  Kevin Buettner  <[email protected]>

	* gdb.texinfo (set remotebreak): Add anchor.
	(X packet): Likewise.
	(Remote Protocol): Add new section `Interrupts' and new index
	entry `interrupts (remote protocol)'.

2005-11-18  Jim Blandy  <[email protected]>

	* gdb.texinfo (Packets): Move information out of 'q' and 'Q'
	entries into the General Query Packets section.  Add a
	cross-reference to that section.  Drop description of replies, as
	these are covered in the descriptions of each packet.
	(General Query Packets): Add introductory text.  Explain naming
	conventions, and how the end of a name is recognized.

2005-11-17  Kevin Buettner  <[email protected]>

	* gdb.texinfo (Remote configuration): Fix typo in description of
	"set remotebreak" command.

2005-11-16  Jim Blandy  <[email protected]>

	* gdb.texinfo (Packets, Stop Reply Packets)
	(General Query Packets): Various formatting cleanups.
	- Use @samp for packet contents.
	- Drop summaries from packet @item lines; the same information appears
	  immediately below in the description.
	- Delete paragraph breaks after packet @item commands, so that the
	  description appears directly to the right of the packet prototype
	  in the printed manual, if it fits.
	- Place spaces in packet prototypes between @vars and non-@var
	  letters, and explain that they're just for formatting.
	- Use @dots{} instead of '...'.
	- Fix uses of @code where @var was needed.
	- Replace "deprecated" markers with English text spelling out the
	  packet's status and the preferred alternatives.
	- Remove "(reserved)" markers on 'A' and 'I' packets; it's unclear
	  what this ever meant.
	- Remove "(draft)" markers on 'i' packets; nobody has commented on
	  this for a long time.
	- Remove "(draft)" markers on 'z' and 'Z' packets; these have been
	  implemented several times, and have been in use for years.

2005-11-15  Jim Blandy  <[email protected]>

	* gdb.texinfo (Packets): Add index entries for 'm' packet
	disclaimers.
	
	* gdb.texinfo (Packets): Clarify lack of restrictions on behavior
	of stub when processing an 'm' packet.

	* gdb.texinfo (Packets): Mention that packets beginning with
	letters are reserved once, at the top, instead of actually listing
	them all and saying "reserved".

2005-11-15  Andrew Stubbs  <[email protected]>

	* gdb.texinfo (User-defined commands): Add $argc. Add missing 'end'.
	Change @var{$arg0 to @code{$arg0.

2005-11-14  Wu Zhou  <[email protected]>

	* gdb.texinfo (Fortran): Add some words about Fortran debugging.

2005-11-12  Jim Blandy  <[email protected]>

	* gdb.texinfo (General Query Packets): Put packets in alphabetical
	order.  Remove extraneous 'z'.

2005-11-07  Andrew Stubbs  <[email protected]>

	* gdb.texinfo (Choosing files): Add --eval-command.

2005-11-04  Andrew Stubbs  <[email protected]>

	* gdb.texinfo (Choosing modes): Add --return-child-result.


2005-11-01  Andrew Stubbs  <[email protected]>

	* gdb.texinfo (Choosing modes): Add --batch-silent.

2005-10-28  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (GDB/MI Variable Objects): Fix @pxref usage under
	"The -var-update Command".

2005-10-03  Joel Brobecker  <[email protected]>

	* gdb.texinfo (Print Settings): Add documentation for set/show
	print array-indexes.

2005-09-17  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (Contributors): Thank Andrew Cagney for releases
	6.2 and 6.3.

2005-08-27  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (File Options): Don't document --mapped, it's gone
	since 19-Jan-2004.
	(Files): Likewise.
	(Variables, Symbols): Document the "<incomplete type>" message and
	its reasons.

2005-08-01  Fred Fish  <[email protected]>

	* gdb.texinfo (SETUP_ARBITRARY_FRAME): Remove obsolete reference.

2005-07-15  Nick Roberts  <[email protected]>

	* gdb.texinfo (GDB/MI Variable Objects): Describe print-values
	option for -var-list-children and -var-update.
	(GDB/MI Stack Manipulation): Simplify description of
	print-values option for -stack-list-locals.
	(GDB/MI Command Description Format): Clarify.
	(Mode Options): Spelling of superseded.

2005-07-12  Bob Rossi  <[email protected]>

	* gdb.texinfo (GDB/MI Miscellaneous Commands): Fix -inferior-tty-show
	corresponding GDB command comment.

2005-07-06  Bob Rossi  <[email protected]>

	* gdb.texinfo (GDB/MI Miscellaneous Commands): Add -inferior-tty-set
	and -inferior-tty-show.
	(Input/Output): Document "set/show inferior-tty" and tty alias.

2005-07-02  Nathan J. Williams  <[email protected]>

	* gdb.texinfo (Packets): Change description of 'D' packet to note
	that GDB does wait for a response.

2005-06-22  Nick Roberts  <[email protected]>

	* gdb.texinfo (History) Rename "Command History".
	(Command History): Move node "Server Prefix" from section on
	Annotations here.

2005-06-19  Nick Roberts  <[email protected]>

	* gdb.texinfo (GDB/MI Stack Manipulation):
	Re-instate -stack-info-frame with example.  Say that it gets
	info on selected frame, not current frame.

2005-06-18  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Server): Clarify that `file' should be used before
	connecting to the server.
	(Files): Add an xref to the above description.
	(Output Formats): More detailed description of the `c' format.
	(Memory): List explicitly all the formats supported by `x'.
	(Threads): Add an @cindex entry for "thread apply".
	(Files): Document the possibility of loading unlinked object
	files.  Add more indexing for solib-absolute-prefix and
	--with-sysroot.
	(Machine Code): Document possible problems with locations in
	shared libraries.
	(Backtrace): Document that free-standing environments do not need
	to have a `main' function.

2005-06-18  Nick Roberts  <[email protected]>

	* gdb.texinfo (GDB/MI Stack Manipulation): Remove reference to
	-stack-info-frame.

2005-06-07  Andrew Cagney  <[email protected]>

	* gdb.texinfo (Contributors): Note the original multi-arch
	contributors.

2005-06-03  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Registers): Add index entries for the standard
	registers.
	(Frames): Add cross-reference from frame pointer description to
	the Registers node.
	(Annotations Overview): Fix the reference to GDB name.

2005-06-01  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Set Watchpoints): Remove @vindex entry for
	can-use-hw-watchpoints.

2005-05-28  Bob Rossi  <[email protected]>

	* gdb.texinfo (GDB/MI Out-of-band Records): Add bullet enumerating
	the possible reasons why an exec async record would be returned to FE.

2005-05-26  Andrew Cagney  <[email protected]>

	* gdb.texinfo: Note that Elena Zannoni, Fernando Nasser, and
	Andrew Cagney implemented the original GDB/MI.

2005-05-23  Orjan Friberg  <[email protected]>

	* gdb.texinfo (CRIS): Update the cris-version and cris-dwarf2-cfi
	documentation.  Add documentation for cris-mode.

2005-05-20  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Numbers): Explain the example and make the wording
	more acurate.

2005-05-17  Daniel Jacobowitz  <[email protected]>
	    Dennis Brueni  <[email protected]>

	* gdb.texinfo (GDB/MI Breakpoint Table Commands)
	(GDB/MI Data Manipulation, GDB/MI Program Control)
	(GDB/MI Stack Manipulation): Update examples to include the fullname
	attribute in stack frames.

2005-05-12  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Startup): Fix last change.  Treat gdb.ini like we
	do with other non-standard names of init files.

2005-05-11  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Command Files): Move the description of the startup
	from here...
	(Startup): ...to this new subsection of the Invocation chapter.
	Rearrange the description of init files more logically and add a
	cross-reference to "Command Files".  Document the special gdbinit
	name for CISCO 68k.  Expand the description of what GDB does
	during startup.
	(History): Add index entry for HISTSIZE.

2005-05-02  Mark Kettenis  <[email protected]>

	* gdb.texinfo (Files): Remove documentation for auto-solib-limit.

2005-05-02  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (SVR4 Process Information, The isatty call)
	(The system call): Don't use foo(N) notation for man pages and
	functions.
	(Compilation, DJGPP Native): Improve wording.

2005-04-27  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Backtrace): Describe backtraces with arguments that
	were optimized away.

2005-04-22  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Remote configuration): Document "set/show
	get-thread-local-storage-address".  Add cross-reference to the
	description of the qGetTLSAddr packet.
	(General Query Packets): Mention "set remote
	get-thread-local-storage-address" and add a reference to its
	description.

2005-04-19  Nick Roberts  <[email protected]>

	* gdb.texinfo (Backtrace): Describe 'bt full'.

2005-04-17  Nick Roberts  <[email protected]>

	* gdb.texinfo (Mode Options): Fix typo.
	(GDB/MI): Describe how to invoke GDB/MI.

2005-04-16  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (OS Information): Renamed from Auxiliary Vector; all
	references changed.  Add description of "info udot".
	(Files): Document "set/show stop-on-solib-events".
	(M32R/D): Document "set/show download-path", "set/show
	board-address", "set/show server-address", "upload", "tload".
	Document "sdireset", "sdistatus", "debug_chaos", "use_debug_dma",
	"use_mon_code", "use_ib_break", "use_dbt_break".
	(Maintenance Commands): Improve indexing.
	(Target Commands): Document "set/show hash", "set/show debug
	monitor".
	(SVR4 Process Information): Document "info pidlist" and "info
	meminfo".  Document "set/show procfs-tarce" and "set/show
	procfs-file".  Document "proc-trace-*" and "proc-untrace-*".
	(Symbols, The Print Command with Objective-C): Improve indexing.
	(Objective-C): Add references to "info classes" and "info
	selectors".
	(Debugging Output): Improve wording.  Document "set/show debug
	solib-frv".  Fix "set/show debugvarobj".
	(Set Breaks): Add index entry for "hardware breakpoints".
	(Renesas ICE): Document "e7000", "ftplogin", "ftpload", "drain",
	and "set/show usehardbreakpoints".
	(MIPS Embedded): Document "se/show syn-garbage-limit", "set/show
	monitor-prompt", "set/show monitor-warnings", "pmon".
	(ARM): Document "rdilogfile", "rdilogenable", "set/show
	rdiromatzero", "set/show rdiheartbeat".
	(PowerPC): Document SDS-specific commands "set/show sdstimeout",
	"sds".
	(Embedded Processors): Document the "sim" command.
	(Remote): Document the "remote" command.
	(DJGPP Native): Document the "info serial" command.
	(Threads): Document "maint info sol-threads".
	(Files): Document "nosharedlibrary", "add-symbol-file-from-memory".
	(Set Breaks): Improve indexing.
	(Command Syntax): Add a reference to dont-repeat.
	(Define): Document "dont-repeat".
	(TUI Commands): Document "tabset".
	(WinCE): New subsection.  Document "set/show remotedirectory",
	"set/show remoteupload", "set/show remoteaddhost".

2005-04-15  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Hurd Native): New subsection, documents
	Hurd-specific commands.
	(Maintenance Commands): Add cross-reference to "Debugging Output".
	(Debugging Output): Document "set/show debug lin-lwp".
	(MIPS): Improve documentation of heuristic-fence-post.  Document
	"set/show mips abi", "set/show mips saved-gpreg-size", "set/show
	mips stack-arg-size", "set/show mips mask-address", "set/show mips
	remote-mips64-transfers-32bit-regs", "set/show debug mips".
	(ARM): Document ARM-specific commands.
	(AVR): New section.  Document "info io_registers".
	(CRIS): New section.  Document "set/show cris-version" and
	"set/show cris-dwarf2-cfi".
	(HPPA): New section.  Document "set/show debug hppa" and "maint
	print unwind".
	(Neutrino): New subsection.  Document "set/show debug nto-debug".
	(Super-H): New section.  Document the "regs" command.
	(Debugging Output): Document "set/show debug aix-thread".

2005-04-09  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Print Settings): Document "set/show print
	pascal_static-members", "set print repeats", "show print
	null-stop".  Improve indexing.  Fix documentation of "set print
	union".
	(Pascal): New section.
	(Supported languages): Rename from "Support"; all references
	updated.  Add a menu item for Pascal.
	(Numbers): Document "set radix.
	(Screen Size): Document "set/show pagination".
	(MIPS Embedded): Remove "set processor" documentation.
	(Remote configuration): Document "set/show X/P/Z-packet",
	"set/show read-aux-vector-packet", "set/show remote
	symbol-lookup-packet", "set/show remote verbose-resume-packet",
	"set/show remoteaddresssize", "set/show remotebaud", "set/show
	remotedebug", "set/show remotebreak", "set/show remotedevice",
	"set/show remotelogfile".
	(Auxiliary Vector): Add reference to the description of the
	read-aux-vector-packet setting.
	(Set Watchpoints): Add a cross-reference to "set remote
	hardware-breakpoint-limit".
	(General Query Packets): Add indexing of requests and
	cross-references to related commands in "Remote configuration".
	(File-I/O Overview, The system call): Fix wording and typos.
	(Thread Stops): Add index entries.
	(Continuing and Stepping): Document "show step-mode".
	(i386): New node.  Document "set/show struct-convention".
	(Files): Document "show trust-readonly-sections".
	(Calling): Document "set/show unwindonsignal".
	(Messages/Warnings): Add index entries.
	(Maintenance Commands): Document "set/show watchdog".
	(Annotations Overview): Document "show annotate".
	(Set Watchpoints): Add index entries.
	(Symbols): Fix doc of case-sensitive.
	(ABI): Document "show coerce-float-to-double".
	(Convenience Vars, Help): Improve indexing.
	(Machine Code): Document "show disassembly-flavor".
	(Debugging C plus plus): Document "show overload-resolution".
	(Value History, Signaling): Add index entries.

2005-04-08  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Show): Move @kindex entries to their proper places.
	(Processes): Fix wording.
	(History, List, Logging output, Define, Symbols, Print Settings):
	Improve indexing.

2005-04-03  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Targets): Document "set/show architecture".  Remove
	redundant index entry for "target" command.
	(Backtrace): Add index entries.
	(Symbols, Fortran): Document the "set case-sensitive" command.
	(DJGPP Native): Document "set com1base", "set com1irq", etc.
	(Print Settings): Add index entry for "set demangle-style".
	(Target Commands): Document "set download-write-size".
	(Debugging Output): Document "set exec-done-display".

2005-04-02  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Files): Fix the name and documentation of
	add-shared-symbol-files.  Document its alias assf.  Update the
	list of OSs where GDB supports shared libraries.  Fix markup.
	(Continuing and Stepping): Add reference to @var{location} in the
	text.
	(Dump/Restore Files): Fix reference to @{filename}.
	(Help): Fix wording.
	(Attach): Ditto.
	(Set Watchpoints): Ditto.
	(Backtrace): Remove redundant index entries.  Improve index
	entries.
	(Delete Breaks): Fix wording.
	(Memory): Document the compare-sections command.
	(Memory Region Attributes): Improve wording.
	(Disabling): Improve wording.
	(Fortran): New subsection.  Document the "info common" command.
	(Help): Document aliases "info copying" and "info warranty".
	(Caching Remote Data): New section.  Document the "set/show
	remotecache" and "info dcache" commands.
	(Show): Fix wording of the documentation of the "set
	extension-language" command.
	(Signals): Add index entry for "info handle".
	(Memory Region Attributes): Fix punctuation.
	(Symbols): Change the arg name to "location" and refer to it in
	the text.  Fix wording of "info types" doc.
	(Threads): Fix usage of @enumerate @item's.
	(Listing Tracepoints): Add index entry for "info tp".
	(Set Watchpoints): Add xref to "info break" description.
	(Macros): Add an index entry for "macro exp1".  Document the
	"macro list" command.
	(Maintenance Commands): Document "flushregs", "maint agent",
	"maint check-symtabs", "maint cplus", "maint demangle", "maint
	deprecate", "maint undeprecate", "maint dump-me", "maint packet",
	"maint print architecture", "maint print objfiles", "maint print
	statistics", "maint print type", "maint show-debug-regs", "maint
	space", "maint time", and "maint translate-address".
	(Connecting): Document the "monitor" command.
	(Annotations Overview): Describe the "set annotate" command.

2005-04-01  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Set Watchpoints): Document can-use-hw-watchpoints.
	Rearrange index entries and improve wording about support for
	hardware watchpoints.

2005-03-10  Bob Rossi  <[email protected]>

	* gdb.texinfo: Update copyright

2005-02-09  Theodore A. Roth  <[email protected]>

	* gdb.texinfo (General Query Packets): Fix texinfo compile warning and
	error.

2005-02-03  Kevin Buettner  <[email protected]>

	* gdb.texinfo (General Query Packets): Document qGetTLSAddr packet.

2005-01-17  Michael Snyder  <[email protected]>

	* gdb.texinfo: Fix spelling, infinte  ->  infinite.

2005-01-08  Mark Kettenis  <[email protected]>

	* observer.texi (GDB Observers): Document "solib_loaded".

2005-01-07  Andrew Cagney  <[email protected]>

	* configure.ac: Rename configure.in, require autoconf 2.59.
	* configure: Re-generate.

	* configure.in: Replace configdirs with multiple references to
	AC_CONFIG_SUBDIRS.
	* configure: Re-generate.
	
2005-01-04  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Versions and Branches): Make the date (YYYYMMDD)
	part of the version number.

2004-12-24  Mark Kettenis  <[email protected]>

	* gdbint.texinfo (Algorithms): Remove description of
	TARGET_DISABLE_HW_WATCHPOINTS and TARGET_ENABLE_HW_WATCHPOINTS.

2004-12-07  Jim Blandy  <[email protected]>

	* gdb.texinfo (General Query Packets): Specify that thread ID's in
	the 'qC' and 'qThreadInfo' packets are unsigned hexidecimal
	numbers.

2004-12-07  Andreas Schwab  <[email protected]>

	* gdb.texinfo (Mode Options): Document -l option.

2004-12-04  Eli Zaretskii  <[email protected]>

	* gdbint.texinfo (Algorithms): More accurate description of
	STOPPED_BY_WATCHPOINT.  Point out that target_stopped_data_address
	is not needed unless data-read and data-access watchpoints are
	supported.  Add a description of how GDB checks whether the
	inferior stopped because a watchpoint was hit.

2004-11-23  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Files): Add cross-reference to description of
	-readnow command-line switch.

2004-11-10  Randolph Chung  <[email protected]>

	* gdb.texinfo: Document set/show backtrace past-entry commands.
	Rearrange index entries for set/show backtrace past-main.

2004-11-10  Jon Beniston <[email protected]>

	Committed by Andrew Cagney  <[email protected]>.
        * gdb.texinfo (Remote Serial Protocol): Further describe 
        binary transfer escaping mechanism .

2004-11-08  Randolph Chung  <[email protected]>

	* gdb.texinfo (inferior_debugging info): Document "set debug infrun"
	and "show debug infrun".  Add index entries.

2004-10-23  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (SVR4 Process Information): Document subcommands of
	"info proc" that are already implemented.  Add index entries.
	(Working Directory): Add a cross-reference to "info proc" command.
	(Files): Add a tip for decreasing memory used for symtabs from
	shared libraries.
	(Starting): Fix whitespace; make "elaboration" stand out where it
	is first used, and add an index entry for the term.
	(Calling): Expand and elaborate text.  Add "print".  Add the
	description of problems with weak aliases.
	(Core File Generation): New section.

2004-10-12  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Versions and Branches): New chapter.
	(Releasing GDB): Delete "Versions and Branches" section.
	(Top): Add "Versions and Branches".

2004-10-08  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Editing, History): Add cross-references to the
	included Readline and History user documentation.  Remove
	references to the symbol have-readline-appendices which is unused
	and undefined.
	(History): Fix indexing.

2004-10-08  Jeff Johnston  <[email protected]>

	* gdbint.texinfo (target_stopped_data_address): Update to
	new prototype.
	(i386_stopped_data_address): Update prototype and description.
	(i386_stopped_by_watchpoint): New function and description.

2004-10-03  Paul N. Hilfinger  <[email protected]>

	* gdb.texinfo (Filenames): Add Ada suffixes.
	(Ada) New section.

2004-09-27  Andrew Cagney  <[email protected]>
	    Robert Picco  <[email protected]>

	* gdb.texinfo (Packets): Document the "p" packet.

2004-09-21  Jason Molenda  ([email protected])

	* gdb.texinfo (Paths and Names of the Source Files): Document the
	meaning of values in the 'desc' field of a SO stab.

2004-09-20  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (Maintenance Commands): Document "maint set dwarf2
	max-cache-age" and "maint show dwarf2 max-cache-age".

2004-09-16  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Set Breaks): Add index entry for setting
	breakpoints on overloaded C++ functions that are not members of
	any classes.  Add an example and an index entry for setting
	breakpoints on all program functions.
	(Character Sets, Macros, Overlay Commands)
	(Non-debug DLL symbols, GDB/MI Output Syntax)
	(Annotations Overview, Maintenance Commands, File-I/O Overview):
	Use "(@value{GDBP})" instead of a literal "(gdb)".

2004-09-12  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Native Debugging): Delete description of
	FILES_INFO_HOOK.

2004-09-11  Paul Hilfinger  <[email protected]>

	* gdbint.texinfo (User Interface): Change local_hex_string_custom 
	to hex_string_custom (not historically correct, but more 
	understandable, given the current code).

2004-09-03  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Native Debugging): Delete SVR4_SHARED_LIBS.

2004-09-01  Jeff Johnston  <[email protected]>

	* observer.texi (solib_unloaded): New observer.

2004-08-24  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Add missing
	comma.

2004-08-20  Michael Chastain  <[email protected]>

	* (Using the Testsuite): build != host is supported,
	but some test scripts do not support build != host.

2004-08-14  Mark Kettenis  <[email protected]>

	* gdbint.texinfo (Host Definition): Delete description of
	FCLOSE_PROVIDED and GETENV_PROVIDED.

2004-08-05  Mark Kettenis  <[email protected]>

	* gdbint.texinfo (Host Definition): Delete description of
	NO_SYS_FILE.
	(Native Debugging): Delete description of KERNEL_U_ADDR_BSD and
	PTRACE_FP_BUG.

2004-08-05  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Delete
	reference to deprecated_read_fp.

2004-08-02  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Delete
	description of DEPRECATED_REGISTER_BYTES.

2004-07-30  Baurjan Ismagulov  <[email protected]>

	* gdb.texinfo (Source Path): Document the new behavior of
	searching for the source files.

2004-07-17  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Edit): Fix markup of EDITOR and improve wording.
	(Search, Expressions, Arrays, Variables, Data, Machine Code)
	(Auto Display): Improve indexing.

2004-07-16  Andrew Cagney  <[email protected]>

	* gdb.texinfo (Mode Options): Delete documentation on "-async" and
	"-noasync".

2004-07-09  Eli Zaretskii  <[email protected]>

	* gdb.texinfo: Fix @kindex entries so that multiple commands that
	have the same prefix have only their prefix in the index.

2004-07-03  Mark Kettenis  <[email protected]>

	* gdb.texinfo (BSD libkvm Interface): New node (section)
	(Native): Add it to the menu.

2004-07-01  Mark Kettenis  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Remove
	PCC_SOL_BROKEN.

2004-06-24  Mark Kettenis  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Remove
	SUN_FIXED_LBRAC_BUG.

2004-06-26  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Coding): Replace xasprintf with xstrprintf.

2004-06-20  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Deprecate
	USE_STRUCT_CONVENTION.

2004-06-19  Michael Chastain  <[email protected]>

	gdb.texinfo (Bug Reporting): Mention session recording,
	with the script command or Emacs.

2004-06-18  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Deprecate
	FUNCTION_START_OFFSET.

2004-06-14  Andrew Cagney  <[email protected]>

	Based on changes from Karl Berry.
	* gdb.texinfo: Do not use @sc in a direntry.
	* stabs.texinfo: Change @dircateogry to "Software development".
	* gdbint.texinfo, gdb.texinfo, annotate.texinfo: Ditto.

2004-06-13  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Delete
	description of RETURN_VALUE_ON_STACK.

2004-06-09  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Native Debugging): Restore "@table @code"
	deleted by previous patch.

2004-06-08  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Native Debugging): Delete documentation on
	ATTACH_DETACH.

2004-06-06  Randolph Chung  <[email protected]>

	* gdb.texinfo (push_dummy_call): Use @code{struct value}.

2004-06-06  Randolph Chung  <[email protected]>

	* gdb.texinfo (push_dummy_call): Update argument list to match 
	the new push_dummy_call method signature.  Describe the function
	argument.

2004-05-24  Joel Brobecker  <[email protected]>

	* gdb.texinfo (Starting): Document new start command.

2004-05-21  Andrew Cagney  <[email protected]>

	* observer.texi (GDB Observers): Document "inferior_created".

2004-05-08  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Delete
	description of DO_DEFERRED_STORES.

	* gdbint.texinfo (Target Architecture Definition): Delete
	references to DEPRECATED_FIX_CALL_DUMMY.

	* gdbint.texinfo (Target Architecture Definition): Delete
	description of DEPRECATED_CALL_DUMMY_WORDS,
	DEPRECATED_SIZEOF_CALL_DUMMY_WORDS, and CALL_DUMMY.

	* gdbint.texinfo (Target Architecture Definition): Delete
	description of DEPRECATED_PUSH_DUMMY_FRAME.

	* gdbint.texinfo (Target Architecture Definition): Delete
	reference to DEPRECATED_CALL_DUMMY_BREAKPOINT_OFFSET.

2004-05-07  Andrew Cagney  <[email protected]>

	* observer.texi (GDB Observers): Add "Debugging" section.  Include
	cross reference to "set/show debug observer".
	* gdb.texinfo (Debugging Output): Document "set/show debug
	observer".

2004-05-01  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Delete
	description of DEPRECATED_PC_IN_SIGTRAMP.

2004-04-30  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Delete
	documentation for BELIEVE_PCC_PROMOTION_TYPE, no longer defined.

2004-04-30  Orjan Friberg  <[email protected]>

	* observer.texi (GDB Observers): Correct spelling.

2004-04-26  Orjan Friberg  <[email protected]>

	* observer.texi (GDB Observers): Add target_changed event.

2004-04-08  Andrew Cagney  <[email protected]>

	* observer.texi (GDB Observers): Rework, provide generic observer
	definitions and then a list of observable events.

2004-04-04  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Host Definition): Delete reference to
	NO_SIGINTERRUPT.

2004-04-02  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Delete
	reference to DEPRECATED_CALL_DUMMY_LENGTH.

2004-03-28  Stephane Carrez  <[email protected]>

	* gdb.texinfo (TUI Commands): Document tui reg commands.

2004-03-26  Andrew Cagney  <[email protected]>

	* gdb.texinfo (TUI): Delete reference to --enable-tui.  Mention
	"gdbtui".
	(Mode Options): Mention "gdbtui".  Use "Text" not "Terminal".
	(Contributors): Mention both Text and Terminal User Interface.

2004-03-23  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Deprecate
	references to SIGTRAMP_START and SIGTRAMP_END.

2004-03-23  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Deprecate
	references to PC_IN_SIGTRAMP.

2004-03-19  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Delete
	reference to GDB_TARGET_IS_HPPA.

2004-03-18  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Coding): Update section on gdbarch_data,
	describe pre_init and post_init.

2004-03-09  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (Debugging Output): Document values for "set debug
	target".

2004-02-28  Andrew Cagney  <[email protected]>

	* gdb.texinfo (Contributors): Mention GDB 6.1 release engineer.

2004-02-26  Jeff Johnston  <[email protected]>

	* gdb.texinfo (breakpoints): Add information about the
	new "set breakpoint pending" and "show breakpoint pending"
	commands.

2004-02-26  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Coding): Document use of gdbarch_obstack_zalloc
	in Per-architecture module data section.

2004-02-25  Roland McGrath  <[email protected]>

	* gdb.texinfo (General Query Packets): Document qPart:... packets.

2004-02-24  Andrew Cagney  <[email protected]>

	* annotate.texinfo: Wrap fdl.texi include in raise/lower sections.
	* gdb.texinfo, gdbint.texinfo, stabs.texinfo: Ditto.
	* fdl.texi: Import Version 1.2, November 2002.

2004-02-17  Andrew Cagney  <[email protected]>

	* gdb.texinfo (Mode Options): Note that "mi1" is deprecated.

2004-02-16  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Deprecate
	FRAMELESS_FUNCTION_INVOCATION.

2004-02-16  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Coding): Mention -Wunused-function.

2004-02-14  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Delete
	description of DEPRECATED_CALL_DUMMY_STACK_ADJUST.

2004-02-12  Elena Zannoni  <[email protected]>

	* gdb.texinfo: Properly quote the name "C++".
	* gdbint.texinfo: Ditto.
	* stabs.texinfo: Ditto.

2004-02-11  Elena Zannoni  <[email protected]>

	* gdbint.texinfo (Support Libraries): Add doco about obstacks and
	minimal information about libiberty.

2004-02-06  Michael Chastain  <[email protected]>

	* gdb.texinfo (Auxiliary Vector): Fix thinko with @value{GDBN}.

2004-02-04  Roland McGrath  <[email protected]>

	* gdb.texinfo (Auxiliary Vector): New node (section).
	(Data): Add it to the menu.

2004-02-02  Jeff Johnston  <[email protected]>

	* gdb.texinfo (Breakpoints): Add information about pending
	breakpoint support.

2004-01-26  Andrew Cagney  <[email protected]>

	* gdb.texinfo (Overview): Delete references to the cisco protocol
	including the "N" response.

2004-01-26  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Rename
	EXTRACT_STRUCT_VALUE_ADDRESS to
	DEPRECATED_EXTRACT_STRUCT_VALUE_ADDRESS.

2004-01-24  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (KOD): Document "show os".  Add index entries for
	"set/show os" and "info cisco" commands.

2004-01-21  Eli Zaretskii  <[email protected]>

	* Makefile.in (install-info): Prepend $(DESTDIR) to $(infodir).

2004-01-19  Michael Chastain  <[email protected]>

	* gdbint.texinfo: Delete USE_MMALLOC, NO_MMCHECK, MMCHECK_FORCE,
	MMAP_BASE_ADDRESS, MMAP_INCREMENT.

2004-01-19  Nick Roberts  <[email protected]>

	* gdb.texinfo (GDB/MI Stack Manipulation): Describe extension to
	-stack-list-locals.
	(GDB/MI Variable Objects): Describe extension to
	-var-list-children.

2004-01-17  Daniel Jacobowitz  <[email protected]>

	* gdbint.texinfo (DECR_PC_AFTER_HW_BREAK): Don't document.

2004-01-17  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Delete
	documentation on DEPRECATED_NPC_REGNUM.

2004-01-13  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo: Update copyright year.  Mention that set
	follow-fork-mode is supported on GNU/Linux.  Remove documentation of
	"set follow-fork-mode ask".

2004-01-13  Andrew Cagney  <[email protected]>

	* gdbint.texinfo: Update copyright year.
	(Coding): Add -Wunused-label to list of -Werror warnings.

2004-01-08  Jason Molenda  <[email protected]>
            Eli Zaretskii  <[email protected]>

	* gdb.texinfo: Update copyright.
	(Objective-C): "methodName" typeo fixed.  Add @code/@var markup
	around names, as appropriate.  Minor syntax cleanup of
	_NSPrintForDebugger explanation.  Two spaces after periods.
	GDBN used instead of lit. "gdb".  Index entries added for
	print-object and _NSPrintForDebugger.  @noindent added in one spot.

2003-11-11  Elena Zannoni  <[email protected]>

	* stabs.texinfo: Add dircategory and direntry commands.
	* annotate.texinfo: Ditto.

2003-11-10  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Replace the
	return_value method's "inval" and "outval" parameters with
	"readbuf" and "writebuf".

2003-10-28  Jim Blandy  <[email protected]>

	* gdb.texinfo (The F request packet, The F reply packet): Renamed
	from "The `F' request packet" and "The `F' reply packet", to make
	texi2dvi happy.
	(File-I/O remote protocol extension): Update menu entries, too.

2003-10-26  Michael Chastain  <[email protected]>

	* gdb.texinfo (Thread Stops): Document the issue with
	premature return from system calls in multi-threaded programs.

2003-10-24  Andrew Cagney  <[email protected]>

	* annotate.texinfo: Fix "fortunatly"[sic].

2003-10-23  Kei Sakamoto  <[email protected]>

	* gdb.texinfo (Contributors to GDB): Replace "Renesas"
	with "Hitachi" and "Mitsubishi".

2003-10-20  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Document
	gdbarch_return_value.  Add cross references from
	USE_STRUCT_CONVENTION, EXTRACT_RETURN_VALUE, and
	STORE_RETURN_VALUE, and from/to EXTRACT_STRUCT_VALUE_ADDRESS.

2003-10-18  Mark Kettenis  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Document
	regset_from_core_section.

2003-10-16  Kei Sakamot Sakamoto  <[email protected]>

	* gdb.texinfo (M32R/D): Mention m32rsdi target.

2003-10-15  Kevin Buettner  <[email protected]>

	From Anthony Green  <[email protected]>:
        * gdb.texinfo (Breakpoints related warnings): Insert into menu.

2003-10-14  Kevin Buettner  <[email protected]>

 	* gdb.texinfo (Breakpoint related warnings): New node.
 	* gdbint.texinfo (ADJUST_BREAKPOINT_ADDRESS): Document.

2003-10-13  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (Remote Protocol): Document v and vCont.

2003-10-10  Kei Sakamoto  <[email protected]>

	* gdb.texinfo: Replace "Hitachi" and "Mitsubishi" with "Renesas".
	* gdbint.texinfo: Ditto.

2003-10-09  Andrew Cagney  <[email protected]>

	From 2003-09-18 David Anderson <[email protected]>:
	* gdb.texinfo (GDB/MI Symbol Query): Replace "comamnd" with
	"command".

2003-10-03  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Deprecate
	IBM6000_TARGET.  Mention that it implies an RS/6000 system and not
	just target.

2003-10-02  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Rename
	REGISTER_RAW_SIZE to DEPRECATED_REGISTER_RAW_SIZE.
	* gdb.texinfo (Packets, Stop Reply Packets): Ditto.
	* gdbint.texinfo (Target Architecture Definition): Rename

2003-09-30  Andrew Cagney  <[email protected]>

	REGISTER_VIRTUAL_SIZE to DEPRECATED_REGISTER_VIRTUAL_SIZE.
	(Target Architecture Definition):

	* gdbint.texinfo (Target Architecture Definition): Rename
	REGISTER_VIRTUAL_TYPE to DEPRECATED_REGISTER_VIRTUAL_TYPE.

2003-09-29  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Delete
	documentation for NEED_TEXT_START_END.

	* gdbint.texinfo (Target Architecture Definition): Rename
	NPC_REGNUM to DEPRECATED_NPC_REGNUM.  Add cross reference to
	TARGET_WRITE_PC.

2003-09-22  Michael Chastain  <[email protected]>

	* gdbint.texinfo (Testsuite Organization): Change gdb.c++ to gdb.cp.

2003-09-21  Anthony Green  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Fix typos.

2003-09-21  Mark Kettenis  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Document
	stabs_argument_has_addr.

2003-09-18  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Delete
	documentation on REGISTER_NAMES.

2003-09-13  Mark Kettenis  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Replace
	REG_STRUCT_HAS_ADDR with DEPRECATED_REG_STRUCT_HAS_ADDR.

2003-09-11  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Replace
	STACK_ALIGN with DEPRECATED_STACK_ALIGN.

2003-08-18  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Document
	"frame_red_zone_size".

2003-08-09  Andrew Cagney  <[email protected]>

	* gdb.texinfo (Backtrace): Replace "set/show backtrace-below-main"
	with "set/show backtrace past-main" and "set/show backtrace
	limit".

2003-08-08  H.J. Lu  <[email protected]>

	* Makefile.in (install-info): Support DESTDIR.
	(install-html): Likewise.

2003-08-07  Andrew Cagney  <[email protected]>

	Patch from Nick Roberts.
	* gdb.texinfo (Using GDB under GNU Emacs): Fix/update key
	bindings.  Remove description of send-gdb-command.

2003-08-07  Andrew Cagney  <[email protected]>

	* gdb.texinfo (Mode Options): Mention that "mi2" was included in
	GDB 6.0.

2003-08-06  Andrew Cagney  <[email protected]>

	* gdb.texinfo (Mode Options): Mention that level three is the
	highest available and that level 2 is deprecated.
	(Annotations Overview): Mention annotation levels. Cross reference
	to "Limitations of the Annotation Interface" in annotate.texi.
	(TODO, Value Annotations, Frame Annotations): Delete section.
	(Displays, Breakpoint Info): Delete.

2003-08-04  Andrew Cagney  <[email protected]>

	* agentexpr.texi: Delete @bye.
	* Makefile.in (STABS_DOC_SOURCE_INCLUDES): Add "fdl.texi"
	(stabs.info): Add $(srcdir) to include search path.
	(html): Depend on "annotate_toc.html", and not "annotate.html".
	* stabs.texinfo: Ditto.  Include "fdl.texi".
	* gdbint.texinfo: Update copyright statement's list of invariant
	sections.

2003-07-28  Andrew Cagney  <[email protected]>

	* Makefile.in (INFO_DEPS): Add annotate.info.
	(dvi, ps, html, pdf): Add annotate.
	(ANNOTATE_DOC_SOURCE_INCLUDES): New macro.
	(ANNOTATE_DOC_BUILD_INCLUDES): New macro.
	(ANNOTATE_DOC_FILES): New macro.
	(ANNOTATE_TEX_TMPS): New macro.
	(annotate.info, annotate_toc.html): Specify dependencies.
	(annotate.ps, annotate.pdf, annotate.dvi): Ditto.
	* annotate.texinfo: Rename annotate.texi.  Get building.  Add
	"Migrating to GDB/MI" and "Limitations of the Annotation
	Interface" chapters.  Mention why it is not part of the user
	guide.  Update copyright notice.  Include "fdl.texi".

2003-07-26  Stephane Carrez  <[email protected]>

	* gdb.texinfo (TUI Keys): Document C-x o key to switch active window.

2003-07-24  Daniel Jacobowitz  <[email protected]>

	* gdbint.texinfo (libgdb components): Correct a GDB to GDBN.

2003-07-24  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (Server): Mention pidof.

2003-07-22  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Coding): Add -Wformat-nonliteral to -Werror
	list.

2003-06-28  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (Logging output): New chapter.

2003-06-24  Joel Brobecker  <[email protected]>

	* gdb.texinfo (Unsupported languages): New section.
	(Languages): Add link to new section.

2003-06-22  Andrew Cagney  <[email protected]>

	* gdb.texinfo (Contributors): Mention 6.0 release engineer.

2003-06-22  Daniel Jacobowitz  <[email protected]>

	* gdbint.texinfo (Coding): Clarify use of gdb_XXX.h headers.

2003-06-22  Daniel Jacobowitz  <[email protected]>

	* Makefile.in (SFILES_INCLUDED): Add agentexpr.texi.
	* agentexpr.texi: Retitle section, and change it to an appendix.
	Comment out texinfo initialization.  Factor a @var{} into two
	pieces to prevent makeinfo warnings.
	* gdb.texinfo: Add Agent Expressions appendix.

2003-06-19  Daniel Jacobowitz  <[email protected]>

	* gdbint.texinfo (Native Conditionals): Remove PREPARE_TO_PROCEED.

2003-06-18  Daniel Jacobowitz  <[email protected]>

        * gdb.texinfo (Remote Debugging): New section "Connecting to a
	remote target".  Document the "detach" and "disconnect" commands.
	(Server, Netware, Debug Session): Reference "Connecting to a
	remote target".
	(GDB/MI Target Manipulation): Document "-target-disconnect".

2003-06-13  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Deprecate
	REMOTE_BREAKPOINT, LITTLE_REMOTE_BREAKPOINT, and
	BIG_REMOTE_BREAKPOINT.  Cross reference BREAKPOINT_FROM_PC.

2003-06-09  Jim Blandy  <[email protected]>

	* gdb.texinfo (Separate Debug Files): Remove extra semicolon.

2003-06-08  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Delete
	documentation on FRAME_ARGS_ADDRESS_CORRECT.

2003-06-08  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Document
	"unwind_sp".  Cross reference "unwind_sp" and TARGET_READ_SP.

2003-06-07  Adam Fedor  <[email protected]>

	* gdb.texinfo: Add Objective-C documentation.

2003-06-01  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Add "func_addr"
	parameter to "push_dummy_call".  Rename "dummy_addr" to "bp_addr".

2003-05-21  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Delete
	references to "extract_address" and "store_address".

2003-05-16  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Replace
	REGISTER_BYTES with DEPRECATED_REGISTER_BYTES.  Fix typo,
	DEPRECATED_REGISTER_SIZE instead of REGISTER_BYTE.

2003-05-14  Theodore A. Roth  <[email protected]>

	* gdbint.texinfo (Breakpoint Handling): Correct a double negative.

2003-05-10  H.J. Lu <[email protected]>

	* Makefile.in (gdb-cfg.texi): Replace $$LN_S with $(LN_S).
	(gdb.dvi): Likewise.
	(gdb.pdf): Likewise.
	(links2roff): Likewise.

2003-05-08  Jim Blandy  <[email protected]>

	* gdb.texinfo (Dump/Restore Files): Update documentation for
	'dump', 'append', and 'restore': note that format argument is
	optional; simplify presentation of the command variants; and be
	more precise about the formats.

2003-05-07  Jim Blandy  <[email protected]>

	* gdb.texinfo (Symbols): Update documentation: 'maint list
	symtabs' and 'maint list psymtabs' have been renamed 'maint info
	symtabs' and 'maint info psymtabs'.

2003-05-05  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Make
	CALL_DUMMY_WORDS, SIZEOF_CALL_DUMMY_WORDS, CALL_DUMMY_LENGTH,
	FIX_CALL_DUMMY, CALL_DUMMY_BREAKPOINT_OFFSET and
	CALL_DUMMY_BREAKPOINT_OFFSET deprecated.

2003-05-04  Andrew Cagney  <[email protected]>

	* gdb.texinfo (Maintenance Commands): Document "maint print
	dummy-frames".

2003-05-04  Andrew Cagney  <[email protected]>

	* gdb.texinfo (GDB/MI Symbol Query): Use @{ and @}.

2003-05-03  J. Brobecker  <[email protected]>

	Thierry Schneider  <[email protected]>
	* gdb.texinfo (section GDB/MI Symbol Query): Add documentation
	for new MI command.

2003-05-03  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Document
	push_dummy_code.  Add cross references.

2003-05-02  Elena Zannoni  <[email protected]>

	* gdb.texinfo (Character Sets): Update to reflect new behavior of
	set/show charsets commands.

2003-04-28  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Replace
	read_fp, TARGET_READ_FP and FP_REGNUM, with deprecated_read_fp,
	DEPRECATED_TARGET_READ_FP and DEPRECATED_REGNUM.

2003-04-28  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Rename
	"tm_print_insn" to "deprecated_tm_print_insn".

2003-04-09  Jim Blandy  <[email protected]>

	* gdb.texinfo (Symbols): Document 'maint list symtabs' and 'maint
	list psymtabs'.

2003-04-08  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Delete
	references to EXTRA_FRAME_INFO.

2003-04-08  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Delete
	PRINT_TYPELESS_INTEGER.

2003-04-02  J. Brobecker  <[email protected]>

	* observer.texi (GDB Observers): Adjust the documentation for the
	normal_stop notification to better describe reality. Fix a couple
	of minor typos.

2003-04-02  Bob Rossi  <[email protected]>

	* gdb.texinfo (GDB/MI Program Control): Add
	'-file-list-exec-source-file'

2003-03-31  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Delete
	references to CALL_DUMMY_P.

2003-03-30  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Remove
	reference to TARGET_WRITE_SP.

2003-03-27  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Remove
	references to write_sp.

2003-03-27  Andrew Cagney  <[email protected]>

	* gdb.texinfo (GDB/MI Variable Objects): Replace @include with
	chapter body.  Use @smallexample instead of @example.
	(Annotations): Ditto.
	* Makefile.in (GDB_DOC_SOURCE_INCLUDES): Remove gdbmi.texinfo and
	annotate.texi.

2003-03-26  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Replace
	PUSH_ARGUMENTS with push_dummy_call, add gdbarch, regcache and
	dummy_addr parameters.

2003-03-25  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Delete
	reference to CALL_DUMMY_STACK_ADJUST_P.  Rename
	CALL_DUMMY_STACK_ADJUST to DEPRECATED_CALL_DUMMY_STACK_ADJUST.
	Add reference to PUSH_ARGUMENTS.

2003-03-23  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Algorithms, Target Architecture Definition):
	Deprecate FRAME_CHAIN and FRAME_CHAIN_VALID.

2003-03-18  J. Brobecker  <[email protected]>

	* gdbint.texinfo (Algorithms): Add new section describing the
	Observer paradigm.
	(Top): Add menu entry to new observer appendix.
	* observer.texi: New file.
	* Makefile.in (GDBINT_DOC_SOURCE_INCLUDES): Add dependency on
	new observer.texi file.

2003-03-17  Andrew Cagney  <[email protected]>

	* gdb.texinfo (DATE): Delete.  Remove date from titles.  Mention
	that GNU Press update the manual version number.

2003-03-12  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Delete
	references to get_saved_register.  Rename GET_SAVED_REGISTER to
	DEPRECATED_GET_SAVED_REGISTER.

2003-03-13  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Replace
	POP_FRAME with DEPRECATED_POP_FRAME.  Update description.

2003-03-12  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Rename
	FRAME_SAVED_PC to DEPRECATED_FRAME_SAVED_PC.

2003-03-10  Corinna Vinschen  <[email protected]>

	* gdb.texinfo: Add File-I/O documentation.

2003-03-10  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Cross reference
	FRAME_SAVED_PC to unwind_pc.  Document unwind_pc.

2003-03-07  Andrew Cagney  <[email protected]>

	* gdb.texinfo (Debugging Output): Mention the "set/show debug
	frame" command.

2003-03-05  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Document
	unwind_dummy_id.  Cross reference unwind_dummy_id and
	SAVE_DUMMY_FRAME_TOS.

2003-03-05  James Ingham <[email protected]>
	    Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (Configuring the current ABI): Document "set cp-abi"
	and "show cp-abi".

2003-03-03  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Document
	register_type.

2003-03-03  Andrew Cagney  <[email protected]>

	* stabs.texinfo (Structures): Use @samp and separate @var's
	instead of a single @var containing a comma separated list.
	(Unions): Ditto.

2003-03-02  Daniel Jacobowitz  <[email protected]>

	* Makefile.in (distclean): Remove config.log.

2003-03-01  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Rename
	FRAME_INIT_SAVED_REGS to DEPRECATED_FRAME_INIT_SAVED_REGS.

2003-03-01  Andrew Cagney  <[email protected]>

	* gdbint.texinfo: Rename INIT_EXTRA_FRAME_INFO to
	DEPRECATED_INIT_EXTRA_FRAME_INFO.

2003-02-23  Raoul Gough  <[email protected]>

	* gdb.texinfo (Cygwin Native): Links to Non-debug DLL symbols.
	(Non-debug DLL symbols): New node, describing the minimal symbols
	loaded from DLLs without real debugging symbols.

2003-02-20  Andrew Cagney  <[email protected]>

	* gdb.texinfo (Set Breaks): Add cross reference to "set remote
	hardware-breakpoint-limit".
	(Set Watchpoints): Add cross reference to "set remote
	hardware-watchpoint-limit".
	(Remote configuration options): New section.

2003-02-04  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Delete
	descrption of IS_TRAPPED_INTERNALVAR.

	From Keith Seitz <[email protected]>:
	* gdb.texinfo (Interpreters): New chapter.  Refer the command-line
	option "-i"/"--interpreter" to this chapter.  Include index
	entries.

2003-02-04  David Carlton  <[email protected]>

	* gdb.texinfo (C@t{++}): Recommend DWARF 2, then stabs+.
	(Variables): Recommend stabs+ and DWARF 2.
	(C plus plus expressions): Correct info about
	compiler versions, debug formats.
	(Contributors): Change 'DWARF2' to 'DWARF 2'.
	PR symtab/874.

2003-02-01  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Delete
	description of ADDITIONAL_OPTIONS, ADDITIONAL_OPTION_CASES,
	ADDITIONAL_OPTION_HANDLER, and ADDITIONAL_OPTION_HELP, and
	BEFORE_MAIN_LOOP_HOOK, and DBX_PARM_SYMBOL_CLASS along with
	references to nindy and i960.
	* gdb.texinfo (i960): Delete all references to i960 and nindy.

2003-02-01  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Delete
	FLOAT_INFO.

2003-01-30  Andrew Cagney  <[email protected]>

	* stabs.texinfo (Member Type Descriptor): Clarify description of
	`@'.  Suggested by Ben Hutchings.

2003-01-29  Andrew Cagney  <[email protected]>

	* gdb.texinfo (M68K): Delete reference to es1800.

2003-01-29  Andrew Cagney  <[email protected]>

	* gdb.texinfo (Maintenance Commands): Document `maint print
	reggroups' and `maint print register-groups'.
	* gdbint.texinfo (Target Architecture Definition): Document
	register_reggroup_p.

2003-01-23  Jim Blandy  <[email protected]>

	* gdb.texinfo (Separate Debug Files): New section.

2003-01-22  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (Maintenance Commands): Add "maint set profile"
	and "maint show profile".

2003-01-16  Michael Chastain  <[email protected]>

	* gdb.texinfo (Installing GDB): Warn against
	".../gdb-VERSION/gdb/configure".
	(Separate Objdir): Likewise.

2003-01-15  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Delete
	definition of PRINT_REGISTER_HOOK.

2003-01-15  Elena Zannoni  <[email protected]>

	(OpenRISC 1000): Fix formatting of command names.

2003-01-15  Elena Zannoni  <[email protected]>

	* gdb.texinfo (Continuing and Stepping): Add new command
	'advance'. Clarify behavior of 'until'.

2003-01-13  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (Files): Document solib-absolute-prefix and
	solib-search-path.

2003-01-09  Michael Chastain  <[email protected]>

	* gdbint.texinfo (Configuring @value{GDBN} for Release): Delete.
	(Create a Release): Add new instructions for new @file{src-release}.
	Document existing instructions for @file{Makefile.in} as
	being for @value{GDBN} 5.3.1 or earlier.

2003-01-09  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Mention
	frame_saved_regs_zalloc and frame_extra_info_zalloc as the way to
	allocate memory.

2003-01-04  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (Controlling GDB): Add @kindex for
	"show osabi".
	(Backtraces): Add @kindex's for backtrace-below-main.

2003-01-04  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (Controlling GDB): Document "set osabi".

2003-01-04  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (Backtraces): Document "set backtrace-below-main".
	* gdbint.texinfo (FRAME_CHAIN_VALID): Update documentation.

2003-01-04  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (Controlling GDB): Add ABI section.  Document
	"set coerce-float-to-double".
	* gdbint.texinfo (COERCE_FLOAT_TO_DOUBLE): Remove documentation.

2003-01-02  Andrew Cagney  <[email protected]>

	* stabs.texinfo: Remove obsolete text.
	* gdbint.texinfo: Ditto.
	* gdb.texinfo: Ditto.

2002-12-22  Mark Kettenis  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Update
	description of gdbarch_register_osabi.

2002-12-20  Kazu Hirata  <[email protected]>

	* agentexpr.texi: Fix typos.
	* annotate.texi: Likewise.
	* fdl.texi: Likewise.

2002-12-10  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Algorithms): Replace INIT_FRAME_PC with
	DEPRECATED_INIT_FRAME_PC.

2002-12-01  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Delete
	PC_IN_CALL_DUMMY.

2002-11-28  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Host Definition): Delete documentation on
	USE_GENERIC_DUMMY_FRAMES.

2002-11-26  Elena Zannoni  <[email protected]>

        Fix PR gdb/723 and PR gdb/245.
	* Makefile.in (install-info): Run the install-info command as part
	of the post install steps only.
	(uninstall-info): New target.
	(uninstall): New target.

2002-11-22  Elena Zannoni  <[email protected]>

	* Makefile.in (install): Make install do some real work.

2002-11-19  Andrew Cagney  <[email protected]>

	Fix POSIX problem reported by Paul Eggert.
	* Makefile.in (GDBvn.texi): Use `sed q' instead of `head -1'.
	Fix PR gdb/527.

2002-10-26  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Delete
	definition of DO_REGISTERS_INFO.

2002-10-18  Kevin Buettner  <[email protected]>

	* gdbint.texinfo (Address Classes): Fix problems with insertion
	of ``{'' and ``}'' in example.

2002-10-17  Kevin Buettner  <[email protected]>

	* gdbint.texinfo (Address Classes): New section.
	(Target Conditionals): Document ADDRESS_CLASS_NAME_TO_TYPE_FLAGS,
	ADDRESS_CLASS_NAME_TO_TYPE_FLAGS_P, ADDRESS_CLASS_TYPE_FLAGS,
	ADDRESS_CLASS_TYPE_FLAGS_P, ADDRESS_CLASS_TYPE_FLAGS_TO_NAME, and
	ADDRESS_CLASS_TYPE_FLAGS_TO_NAME_P.

2002-10-11  Klee Dienes  <[email protected]>

	* gdb.texinfo (Registers): Mention vector registers as well as
	floating registers in the documentation for 'info registers' and
	'info all-registers'.

2002-10-11  Daniel Jacobowitz  <[email protected]>

	* gdbint.texinfo (CPLUS_MARKER): Remove item.

2002-10-03  Jeff Johnston  <[email protected]>

	* gdbint.texinfo (Item Output Functions): Add new ui_out_field_fmt_int
	interface definition.

2002-10-03  Marko Mlinar   <[email protected]>

	* gdb.texinfo (Target Commands): Add or1k target specific
	commands.
	* gdb.texinfo (Contributors): Add myself to the contributors list.

2002-10-01  Andrew Cagney  <[email protected]>

	* gdb.texinfo (Mode Options): Update --interpreter option.  "mi2"
	and "mi1" instead of "mi1" and "mi0".

2002-09-29  Hans-Peter Nilsson  <[email protected]>

	* gdb.texinfo (Packets): Fix typos "alligned".
	Correct z3/Z3 description.  Correct z4/Z4 title.

2002-09-27  Andrew Cagney  <[email protected]>

	* all-cfg.texi: Use @sc for GDB and GCC.  Update copyright.

2002-09-25  Kevin Buettner  <[email protected]>

	* gdb.texinfo: Use GNU/Linux instead of Linux.

2002-09-25  Andrew Cagney  <[email protected]>

	* gdb.texinfo (Packets): Replace @samp{} with ``an empty string''.

2002-09-24  Andrew Cagney  <[email protected]>

	* gdb.texinfo: Replace @example with @smallexample.

2002-09-20  Kevin Buettner  <[email protected]>

	From Eli Zaretskii  <[email protected]>:
	* gdb.texinfo (Character Sets): Use @smallexample instead of
	@example.  Use GNU/Linux instead of Linux.

2002-09-20  Jim Blandy  <[email protected]>

	* gdb.texinfo: Add character set documentation.

2002-09-19  Andrew Cagney  <[email protected]>

	* gdb.texinfo (Packets): Revise `z' and `Z' packet documentation.
	(Packets): Add cross reference from `b' packet to `z' packets.

2002-09-19  Andrew Cagney  <[email protected]>

	* gdb.texinfo (Maintenance Commands): Document ``maint
	internal-error'' and ``maint internal-warning''.

	* gdbint.texinfo (Target Architecture Definition): Revise
	description of STACK_ALIGN.  Add description of FRAME_ALIGN.

2002-09-19  Joel Brobecker  <[email protected]>

	* gdbint.texinfo (Target Conditionals): Document the new
	NAME_OF_MALLOC macro.

2002-09-05  Andrew Cagney  <[email protected]>

	* gdb.texinfo (Contributors): Mention 5.2 and 5.3 release
	engineer.

2002-09-02  Stephane Carrez  <[email protected]>

	* gdb.texinfo (TUI Overview): Document status line fields.

2002-09-02  Stephane Carrez  <[email protected]>

	* gdb.texinfo (TUI Commands): Document info win command.

2002-09-01  Stephane Carrez  <[email protected]>

	* gdb.texinfo (TUI Overview): Document breakpoint markers.

2002-09-01  Stephane Carrez  <[email protected]>

	* gdb.texinfo (TUI Single Key Mode): Document new SingleKey mode.
	(TUI Keys): Likewise.

2002-08-25  Andrew Cagney  <[email protected]>

	* gdb.texinfo (Examples): Use ``->'' for a packet send and ``<-''
	for a packet receive.

2002-08-25  Andrew Cagney  <[email protected]>

	* Makefile.in (clean): Move to end of file.
	(distclean, maintainer-clean, realclean): Ditto.
	(mostlyclean): Move rule to end of file.  Use GDB_TEX_TMPS,
	GDBINT_TEX_TMPS, STABS_TEX_TMPS.
	(gdb.dvi, gdb.pdf): Do not cleanup TeX temp files after texi2dvi.
	(gdbint.dvi, gdbint.pdf, stabs.dvi, stabs.pdf): Ditto.

2002-08-24  Andrew Cagney  <[email protected]>

	* Makefile.in (GDBINT_TEX_TMPS): Define.
	(gdbint.dvi, gdbint.pdf): Use
	(GDB_TEX_TMPS): Define.
	(gdb.dvi, gdb.pdf): Use.
	(STABS_TEX_TMPS): Define.
	(stabs.dvi, stabs.pdf): Use.
	(GDB_DOC_SOURCE_INCLUDES): New macros.
	(GDB_DOC_BUILD_INCLUDES, GDB_DOC_FILES): New macros.
	(GDBINT_DOC_FILES_INCLUDES): New macros.
	(GDBINT_DOC_BUILD_INCLUDES): New macros.
	(GDBINT_DOC_FILES, STABS_DOC_SOURCE_INCLUDES): New macros.
	(STABS_DOC_BUILD_INCLUDES, STABS_DOC_FILES): New macros.
	(SFILES_DOC, SFILES_INCLUDED, SFILES_LOCAL): Delete macros.
	(links2roff): Replace SFILES_INCLUDED with
	GDB_DOC_SOURCE_INCLUDES.
	(gdb.dvi, gdb_toc.html, gdb.pdf, gdb.info): Update dependencies.
	(gdb.me, gdb.mm, gdb.ms): Update dependencies.
	(gdbint.dvi, gdbint_toc.html, gdbint.pdf, gdbint.info): Update
	dependencies.
	(stabs.info, stabs_toc.html, stabs.pdf, stabs.dvi): Update
	dependencies.
	(gdbmi.texinfo): Delete rule.
	(inc-hist.texinfo): Delete rule.
	(rluser.texinfo): Delete rule.

2002-08-23  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Update
	STORE_RETURN_VALUE, mention regcache.

2002-08-21  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Document
	print_registers_info.  Note that DO_REGISTERS_INFO is deprecated.

2002-08-19  Andrew Cagney  <[email protected]>

	* gdb.texinfo (Remote Protocol): Reformat.  Use cross references.
	Fix minor typos.  Add index entries.

2002-08-18  Andrew Cagney  <[email protected]>

	* gdb.texinfo (Data): Add ``Vector Unit'' to menu.

2002-08-15  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Document
	PRINT_VECTOR_INFO.
	* gdb.texinfo (Vector Unit): Document "info vectors" command.

2002-08-13  Andrew Cagney  <[email protected]>

	* gdb.texinfo (Maintenance Commands): Document "maint print
	registers", "maint print raw-registers" and "maint print
	cooked-registers".

2002-08-08  Grace Sainsbury  <[email protected]>

	From Mark Salter:
	* gdb.texinfo (Protocol): Document T packet extension to
	allow watchpoint address reporting.

2002-08-03  Andrew Cagney  <[email protected]>

	* gdb.texinfo (Dump/Restore Files): Move `[]' to outside of @var.

2002-08-01  Andrew Cagney  <[email protected]>

	* stabs.texinfo, gdb.texinfo, gdbint.texinfo: Obsolete references
	to CHILL.

2002-08-01  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Coding): Revise section "Include Files".

2002-07-24  Andrew Cagney  <[email protected]>

	* gdbint.texinfo: Obsolete references to m88k.
	* gdb.texinfo: Ditto.

2002-07-10  Joel Brobecker  <[email protected]>

	* gdbint.texinfo (Create a release candiate): Add the location
	where the proper version of autoconf can be retrieved.

2002-07-09  Don Howard  <[email protected]>

	* gdb.texinfo (Command Files): Further describe the behavior of
	sourced command files.

2002-06-27  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (User Interface): ISO C rather than ISO-C.
	(Coding): Clarify ISO C version that GDB assumes.

2002-06-26  Tom Tromey  <[email protected]>

	* gdbint.texinfo (User Interface): Mention add_setshow_cmd and
	add_setshow_cmd_full.

2002-06-25  Don Howard  <[email protected]>

	* gdb.texinfo (Memory Region Attributes): Document new behavior
	for 'mem' command.

2002-06-11  Jim Blandy  <[email protected]>

	* gdb.texinfo (Symbols): Update documentation for `info source'
	command.

	* gdb.texinfo (Macros): Call the command `info macro', not
	`show macro'.

2002-06-09  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Coding): Add section ``Per-architecture module
	data''.

2002-06-09  Mark Kettenis  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Document
	GDB_OSABI_GO32 and GDB_OSABI_NETWARE.

2002-06-08  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Releasing GDB): Fix typos in @itemize @bullet
	lists.

2002-06-08  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Releasing GDB): Revise the section ``Cut the
	Branch''.

2002-06-01  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Add section
	``Converting an existing Target Architecture to Multi-arch''.

2002-05-30  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Releasing GDB): Rename ``Obsoleting any code''
	to ``Obsoleting code''.  Revise.

2002-05-17  Jim Blandy  <[email protected]>

	* gdb.texinfo (C Preprocessor Macros): New chapter.
	Include it in the main menu.
	(Contributors): Credit Jim Blandy with macro support.
	(Compilation): Explain how to get macro information into the
	executable.
	(Expressions): Note that preprocessor macros are expanded.

2002-05-14  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo (Debug Session): Document new `udp:' and `tcp:'
	options for `target remote'.

2002-05-13  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Delete
	documentation on NNPC_REGNUM.

2002-05-11  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Document
	REGISTER_TO_VALUE and VALUE_TO_REGISTER and CONVERT_REGISTER_P.
	(Target Architecture Definition): Revise section `Using Different
	Register and Memory Data Representations'.  Add section `Raw and
	Virtual Register Representations'.

2002-05-11  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Mention
	defaults for REGISTER_VIRTUAL_SIZE and REGISTER_RAW_SIZE.
	(Target Architecture Definition): Mention same.  Add references to
	web pages.

2002-05-08  Michael Snyder  <[email protected]>

	* stabs.texinfo (Attributes): Document new "vector" attribute.

2002-05-04  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Releasing GDB): Revise `Create a Release'.

2002-05-04  Andrew Cagney  <[email protected]>

	* gdb.texinfo: Delete obsolete references to a29k.

2002-04-24  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Replace
	IN_SIGTRAMP with PC_IN_SIGTRAMP.

2002-04-24  David S. Miller  <[email protected]>

	* gdbint.texinfo (REGISTER_IN_WINDOW): Delete definition.

2002-04-21  David S. Miller  <[email protected]>

	* gdbint.texinfo (SKIP_PROLOGUE_FRAMELESS_P): Delete definition.

2002-04-21  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Delete
	definition of HAVE_REGISTER_WINDOWS.

2002-04-19  Eli Zaretskii  <[email protected]>

	* gdbint.texinfo (Releasing GDB, Coding): Fix typos.  Reported by
	"Theodore A. Roth" <[email protected]>.

2002-04-15  Don Howard  <[email protected]>

	From Eli Zaretskii <[email protected]>
	* gdb.texinfo (show max-user-call-depth): Correct formatting.
	Provide a better explaination of this feature.

2002-04-14  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Remove
	FRAME_CHAIN_COMBINE.

2002-04-12  Michael Chastain  <[email protected]>

	* gdbint.texinfo (Obsolete Conditionals): Remove reference to
	REG_STACK_SEGMENT.

2002-04-09  Michael Chastain  <[email protected]>

	* gdbint.texinfo (Obsolete Conditionals): Remove references to
	PYRAMID_* macros.

2002-04-07  Andrew Cagney  <[email protected]>

	* gdb.texinfo (Bug Reporting): Document that the web is the
	prefered way of submitting bug reports.
	(Bug Reporting): Delete the s-mail address as the last resort.

2002-04-05  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Delete
	references to TARGET_WRITE_FP and write_fp.

2002-03-27  Michael Snyder  <[email protected]>

	* gdb.texinfo: Document new commands dump, append, and restore.

2002-03-27  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Releasing GDB): Revise the section `Before the
	Branch'.

2002-03-18  Andrew Cagney  <[email protected]>

	* gdb.texinfo: Change all examples to @smallexample.
	* gdbint.texinfo: Ditto.

2002-03-18  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Releasing GDB): Add section ``Versions and
	Branches''.

2002-03-18  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Releasing GDB): Add the section``Branch Commit
	Policy''.

2002-03-04  Fred Fish  <[email protected]>

	* gdbint.texinfo: Fix a bunch of typos (alsways, mirrorred,
	expresson, suports, dependant, trhe, perhaphs, situtations,
	explictily, taged, oportunity, unfortunatly).

2002-02-24  Andrew Cagney  <[email protected]>

	* Makefile.in (gdb.info): Add explicit path to gdb.texinfo.
	Remove reference to 3.12.

2002-02-23  Andrew Cagney  <[email protected]>

	* gdbint.texinfo: Include fdl.texi.
	(Top): Add GNU Free Documentation License.
	* Makefile.in (SFILES_INCLUDED): Add gpl.texi.
	(gdbint.dvi, gdbint.pdf, gdbint.info): Add dependency on fdl.texi.
	(gdbint_toc.html): Add dependency on gdb-cfg.texi and fdl.texi.
	(gdbint.info): Add srcdir to include path.
	* gdb.texinfo: Include gpl.texi.
	(Top): Add Copying.
	* gpl.texi: New file.

2002-02-23  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Debugging GDB): Remove references to cygnus.com.

2002-02-19  Pierre Muller  <[email protected]>

	* gdb.texinfo: Document Cygwin native specific commands.

2002-02-15  Daniel Jacobowitz  <[email protected]>

	* gdb.texinfo: Document gdbserver ``--attach'' command.

2002-02-07  Michael Snyder  <[email protected]>

	* gdb.texinfo (overlays): Change @var(_ovly_debug_event)
	to @code(_ovly_debug_event).

2002-02-07  Andrew Cagney  <[email protected]>

	* gdb.texinfo (How Overlays Work): Shrink the overlay diagram.

2002-02-06  Michael Snyder  <[email protected]>

	* gdb.texinfo (overlays): Mention new magic symbol
	'_ovly_debug_event', which allows GDB to keep better track
	of overlays.

2002-02-03  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Memory Region Attributes): Fix the wording.
	Suggested by Dmitry Sivachenko.

	* (<many nodes>): Fix the spelling and punctuation of "i.e.".

2002-02-01  Michael Snyder  <[email protected]>

	* gdb.texinfo (set trust-readonly): Change value{gdbn} to value{GDBN}.

2002-01-30  Michael Snyder  <[email protected]>

	* gdb.texinfo: (remote protocol): Gramatical fix-up.
	(set trust-readonly-sections): Document.

2002-01-29  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Releasing GDB): Revise and update.

2002-01-28  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Delete
	description of TARGET_BYTE_ORDER_DEFAULT.

2002-01-27  Eli Zaretskii  <[email protected]>

	* gdb.texinfo: Fix typos and markup.  From Dmitry Sivachenko
	<[email protected]>.

2002-01-23  Andrew Cagney  <[email protected]>

	* libgdb.texinfo: Delete file.

2002-01-22  Andrew Cagney  <[email protected]>

	* gdb.texinfo: Remove makeinfo 3.12 hacks.
	* gdbint.texinfo: Ditto.

Tue Jan 22 11:57:38 2002  Andrew Cagney  <[email protected]>

	* gdb.texinfo: Fix typo ``Remove' -> ``Remote''.

2002-01-22  Andrew Cagney  <[email protected]>

	* Makefile.in: Update copyright.
	(TEXI2DVI): Define.
	(gdb.dvi, gdb.pdf, stabs.dvi, stabs.pdf): Use TEXI2DVI.
	(gdbint.dvi, gdbint.pdf): Use TEXI2DVI.  Add dependency on
	gdb-cfg.texi.
	(TEXINDEX, PDFTEX): Delete makefile variables.

2002-01-22  Andrew Cagney  <[email protected]>

	* gdb.texinfo (Protocol): Move section to appendix.

2002-01-21  Andrew Cagney  <[email protected]>

	* gdb.texinfo (Remote Debugging): Create a menu.
	(Top): Add ``Remote Debugging'' to menu.

2002-01-21  Andrew Cagney  <[email protected]>

	* gdb.texinfo (Remote): Move the sub-section ``The GDB remote
	serial protocol'' from here.
	(Remote Debugging): To here.  New chapter.

2002-01-20  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Delete
	description of TARGET_BYTE_ORDER_SELECTABLE_P.

2002-01-20  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Host Definition): Revise.  xm-xyz.h and xyz.mh
	are no longer needed.
	(Porting GDB): Add maintainer note about configure.host.

2002-01-20  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Remove
	definition of IEEE_FLOAT.

2002-01-20  Eli Zaretskii  <[email protected]>

	* gdb.texinfo: Beautify copyright years; fix a typo.
	(DJGPP Native): Fix overfull hboxes in examples.  From Brian Youmans
	<[email protected]>

2002-01-19  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Host Definition): Remove references to
	MALLOC_INCOMPATIBLE.

2002-01-17  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Host Definition): Remove references to XDEPFILES
	and xyz-xdep.o.

2002-01-17  Andrew Cagney  <[email protected]>

	* gdb.texinfo 	(Maintenance Commands): Add appendix.
	(Set Breaks): Copy ``maint info breakpoint'' doco to
	``Maintenance Commands'' appendix.  Add reference.

2002-01-17  Andrew Cagney  <[email protected]>

	* fdl.texi: Remove next/prev from @node.

2002-01-17  Eli Zaretskii  <[email protected]>

	* gdb.texinfo: @include fdl.texi.  Fixes for overfull hboxes and
	for monstrous @multitable (from Brian Youmans).

	* fdl.texi: New file.

	* Makefile.in (SFILES_INCLUDED): Add fdl.texi.

2002-01-15  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Releasing GDB): New chapter.

2002-01-14  Andrew Cagney  <[email protected]>

	* gdb.texinfo (Embedded Processors, Calling program functions):
	Obsolete references to a29k.

2002-01-13  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Coding): Review Cleanups section.  Examples
	examples.  Document that a code-block should do or discard its
	cleanups before exit.

2002-01-11  Michael Snyder  <[email protected]>

	* gdb.texinfo (Choosing files): Change @samp to @file.

2002-01-05  Michael Snyder  <[email protected]>

	* gdb.texinfo (--pid): Document new command line option (attach).

2002-01-07  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Tracepoints): Clarify that tracepoints need support
	in the stub.

2002-01-04  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Replace
	BIG_ENDIAN with BFD_ENDIAN_BIG.

2002-01-03  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Replace
	value_ptr with struct value pointer.

2002-01-02  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Free Software): Fix wording.

2001-12-31  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Free Software): New section ``Free Software Needs
	Free Documentation''.

2001-12-30  Eli Zaretskii  <[email protected]>

	* stabs.texinfo:
	* gdb.texinfo:
	* gdbint.texinfo:
	* libgdb.texinfo:
	* annotate.texi: Fix the application of GFDL in the Copyright notice.

2001-12-29  Michael Snyder  <[email protected]>

	* gdb.texinfo (maint info sections): Fix typo.

2001-12-26  Michael Snyder  <[email protected]>

	* gdb.texinfo (maint info sections): Document.

	* gdb.texinfo (info proc): Comment out documentation for
	'info proc' sub-options that are currently not implemented.

2001-12-20  Jim Blandy  <[email protected]>

	* gdbint.texinfo (TARGET_CHAR_SIGNED): Document.

2001-12-15  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Replace
	LITTLE_ENDIAN with BFD_ENDIAN_LITTLE.

2001-12-01  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Host Definition): Delete documentation on
	HOST_BYTE_ORDER.

2001-11-30  Jim Blandy  <[email protected]>

	* gdb.texinfo (Overlays): New chapter, documenting GDB's
        overlay support.  Add to top-level menu.

2001-11-26  Tom Tromey  <[email protected]>

	* gdb.texinfo (Command Syntax): Document C-o binding.

2001-07-26  Christopher Faylor  <[email protected]>

	* gdb.texinfo (Options): Eliminate attempt to explain .gdbinit/gdb.ini
	use since it is described in the referenced section.

	From Eli Zaretskii <[email protected]>
	* gdb.texinfo (Command Files): Reword to make gdb.ini requirement
	clearer when using DJGPP.

2001-11-24  Christopher Faylor  <[email protected]>

	* gdb.texinfo (File Options): Change description of -nx and gdb.ini to
	specifically refer to MS-DOS.
	(command files): Mention gdb.ini is only used on MS-DOS.

2001-11-21  Tom Tromey  <[email protected]>

	* gdb.texinfo (Invoking GDB): Document --args.
	(Mode Options): Likewise.

2001-11-21  Jim Blandy  <[email protected]>

	* gdbint.texinfo (TARGET_RANGE_PROFITABLE_FOR_HW_WATCHPOINT):
 	Delete documentation; this macro has been removed from the
 	sources.

2001-11-13  Jim Blandy  <[email protected]>

	* gdbint.texinfo (COERCE_FLOAT_TO_DOUBLE): Clarify.

2001-11-06  Corinna Vinschen  <[email protected]>

	* gdb.texinfo (gdbarch_in_function_epilogue_p): Add documentation.

2001-11-05  Michael Snyder  <[email protected]>

	* gdb.texinfo (info functions): Document use of backslash to
	quote regexp chars in function names such as "operator*()".

2001-11-01  Fred Fish  <[email protected]>

	* gdbint.texinfo (SOLIB_ADD): Document additional new
	"readsyms" arg.

2001-10-30  Don Howard  <[email protected]>

	* gdb.texinfo: (Command Files) Added documentation for the
	behavior of gdb with input redirected from a file.

2001-10-28  Fred Fish  <[email protected]>

	* gdb.texinfo (auto-solib-add): Change docs to match
	implementation change.
	(auto-solib-limit): Add docs for new variable.

2001-10-15  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Function
	value_as_pointer renamed to value_as_address.

2001-10-15  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Default
	POINTER_TO_ADDRESS functions assume unsigned addresses.
	(INTEGER_TO_ADDRESS): Document.  Derive pragmatics section from a
	posting by Jim Blandy.

2001-10-12  Jim Blandy  <[email protected]>

	* Makefile.in (MAKEHTMLFLAGS): Remove -glossary; the most recent
	version of texi2html (1.64) doesn't support this flag any more.

2001-09-08  Mark Kettenis  <[email protected]>

	* gdbint.texinfo (Host Definition): Remove description of
	MEM_FNS_DECLARED.

	* gdbint.texinfo (Host Definition): Remove description of R_OK.

	* gdbint.texinfo (Host Definition): Remove description of
	HAVE_SIGSETMASK.

2001-09-04  Elena Zannoni  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Add
	explanation of TARGET_PRINT_INSN macro.

2001-08-30  Jim Blandy  <[email protected]>

	* gdb.texinfo (`add-symbol-file'): Correct synopsis.
	Explain what it means to load relocatable files.

2001-08-28  Jim Blandy  <[email protected]>

	* gdbint.texinfo: Bring the HTML `top' menu into sync with the
	info `top' menu.

Wed Aug 15 10:47:28 2001  Christopher Faylor <[email protected]>

	* gdbint.texinfo: Add a cautionary note about macro use.

2001-08-02  Corinna Vinschen  <[email protected]>

	* gdb.texinfo: Explain omitting the hostname in the
	`target remote' command.

2001-07-30  Daniel Jacobowitz  <[email protected]>

	* gdbint.texinfo: Remove extraneous START-INFO-DIR-ENTRY
	and END-INFO-DIR-ENTRY.

2001-07-28  Stephane Carrez  <[email protected]>

	* gdb.texinfo (TUI Configuration): Rename tui configuration variables.

2001-07-25  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (libgdb): Rewrite.

2001-07-26  Eli Zaretskii  <[email protected]>

	* Makefile.in (gdbgui.dvi, gdb-gui, gdbgui.info): Targets deleted.

2001-07-24  Stephane Carrez  <[email protected]>

	* gdb.texinfo (TUI): New chapter, document the TUI.
	(Mode Options): Document the -tui option.

2001-07-23  Mark Kettenis  <[email protected]>

	* gdbint.texinfo (Host Definition): Remove description of
	NEED_POSIX_SETPGID.

2001-07-23  Eli Zaretskii  <[email protected]>

	* gdb.tex (DJGPP Native): New node, with descriptions of
	DJGPP-specific commands.

2001-07-19  John R. Moore  <[email protected]>

	* gdbint.texinfo: Three misspellings.

2001-07-06  Andrew Cagney  <[email protected]>

	* Makefile.in (refcard.dvi): Rewrite to avoid problems with empty
	`test` expressions on bash.  Problem reported by Colin Walters.

2001-07-04  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (User Interface): Update ui-out documentation to
	refelect recent UI/MI updates.

2001-07-04  Andrew Cagney  <[email protected]>

	* gdb.texinfo (Mode Options): Mention the mi0 and mi1
	interpreters.

2001-06-15  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): GDBARCH is a C
	structure and not macros.
	(Host Definition): Document that much of this chapter is obsolete.
	(Target Architecture Definition): Update list of files that make
	up a target architecture.
	(Coding): Update.

2001-06-28  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Update
	EXTRACT_STRUCT_VALUE_ADDRESS and EXTRACT_STRUCT_VALUE_ADDRESS_P.
	The latter has been changed to a true predicate.

2001-06-17  Eli Zaretskii  <[email protected]>

	* annotate.texi: Add @noindent where needed.  From Dmitry
	Sivachenko <[email protected]>.
	* gdb.texinfo: Indexing fix.  From Dmitry Sivachenko.

2001-06-16  Andrew Cagney  <[email protected]>

	* gdb.texinfo (Protocol): Fix typo.  Extra parenthesis.

2001-06-14  Andrew Cagney  <[email protected]>

	* gdb.texinfo (Remote Protocol): Document that the ``!'' packet
	returns ``OK''.  Document that the ``R'' packet does not reply.

2001-06-13  Michael Snyder  <[email protected]>

	* gdb.texinfo (Protocol): Add doc for new packet "qSymbol:".

2001-06-13  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Signals): Clarify the default setting of signal
	handling.

2001-05-14  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (CLEAR_DEFERRED_STORES): Delete stray @item
	(FRAME_ARGS_ADDRESS_CORRECT): Ditto.

2001-05-12  Andrew Cagney  <[email protected]>

	* Makefile.in (GDBvn.texi): Set GDBVN from ../version.in.

2001-05-10  Eli Zaretskii  <[email protected]>

	* gdbint.texinfo (Clean Design and Portable Implementation):
	Renamed from "Clean Design".
	(Clean Design and Portable Implementation): Document portable
	methods of handling file names, and the associated macros.

2001-04-02  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Tracepoint Actions): Mention the "info scope"
	command and provide a cross-reference to its description.
	(Symbols): Note that "info scope" is useful for trace experiments.

2001-04-01  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Symbols): Document "info scope".
	(Tracepoints): New chapter.
	(Contributors): Update for v5.1.
	<All nodes>: Change "C++" to "C@t{++}".

	* gdbint.texinfo (User Interface): A new section about ui_out
	functions, based on text written by Fernando Nasser.

	* stabs.texinfo: Change Permissions to GFDL.  Update Copyright.

2001-03-26  Eli Zaretskii  <[email protected]>

	* gdb.texinfo: Change Permissions to GFDL.  Update Copyright.

	* gdbint.texinfo: Change Permissions to GFDL.  Update Copyright.

	* gdbgui.texinfo: Change Permissions to GFDL.  Update Copyright.
	Replace "GDB" with "@value{GDBN}".  Fix markup.

	* annotate.texi: Change Permissions to GFDL.  Update Copyright.

	* gdb.texinfo (Output Formats): Mention "info symbol" and provide
	a cross-reference to its description.
	(Symbols): Document "info symbol".

2001-03-21  Eli Zaretskii  <[email protected]>

	* gdbint.texinfo (Algorithms): New section "Watchpoints" and new
	subsection "x86 Watchpoints".
	(Target Architecture Definition): Document the macros
	I386_USE_GENERIC_WATCHPOINTS and TARGET_HAS_HARDWARE_WATCHPOINTS.
	(Native Debugging): Document I386_USE_GENERIC_WATCHPOINTS.

2001-03-20  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Update
	definition of SOFTWARE_SINGLE_STEP_P to include empty parameter
	list.

2001-03-06  Kevin Buettner  <[email protected]>

	* Makefile.in, all-cfg.texi, annotate.texi, gdb.texinfo,
	gdbint.texinfo, refcard.tex: Update/correct copyright notices.

2001-02-21  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Signals): Document "ignore", "noignore", and "all".

2001-02-11  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Environment): Document that `path' does not change
	the value of PATH in GDB's own environment (it did in the past,
	but that was changed on March 15, 1994).  Reported by Doug Evans
	<[email protected]>.

	* gdbint.texinfo: Fix up @itemize lists so that @item is alone on
	its line.  Fix markup of commands and macros.  Add an Index node
	and index entries.

2001-01-23  J.T. Conklin  <[email protected]>

	* gdb.texinfo (Memory region attributes): New manual section.

2001-01-04  Nicholas Duffek  <[email protected]>

	* gdbint.texinfo (POP_FRAME): Document use by return_command.

2000-12-25  Eli Zaretskii  <[email protected]>

	* refcard.tex: Version and copyright fixed.  From Phil Edwards
	<[email protected]>.

Thu Nov 30 16:57:19 2000  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (ECOFF_REG_TO_REGNUM, DWARF_REG_TO_REGNUM,
 	DWARF2_REG_TO_REGNUM): Document.

Mon Nov 20 21:29:35 2000  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Coding): Update current value of
 	--enable-build-warnings.  Mention --enable-gdb-build-warnings.

2000-11-19  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Continuing and Stepping):  Fixed markup and typos,
	as suggested by Dmitry Sivachenko <[email protected]>.

2000-11-10  Christopher Faylor <[email protected]>

	* gdb.texinfo: Document new 'set step-mode' command.

2000-10-16  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Contributors, MIPS Embedded): Minor spelling
	changes from Dmitry Sivachenko <[email protected]>.

2000-09-26  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Hooks): Document the new post-hook functionality.
	From Steven Johnson <[email protected]>.

2000-08-10  Mark Kettenis  <[email protected]>

	* gdbint.texinfo (Overall Structure): Spelling fix.

2000-08-10  Eli Zaretskii  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Document that
	REGISTER_CONVERT_TO_VIRTUAL should only be called on a register
	for which REGISTER_CONVERTIBLE returns a zero value.

2000-07-08  Christopher Faylor <[email protected]>

	* Makefile.in (install-info): Find files to install in either the
	build or source directories (adapted from Makefile.am).

2000-07-07  Nicholas Duffek  <[email protected]>

	* stabs.texinfo: Fix spelling errors.
	(String Field): FILE-NUMBER starts from 0, not 1.

2000-07-05  Eli Zaretskii <[email protected]>

	* refcard.tex: Remove \centerline from the blurb.  Patch from
        Brian Youmans.

2000-06-25  Eli Zaretskii <[email protected]>

	* Makefile.in (install-info): Support installation from outside of
        the source directory.  Reported by Mark Harig
        <[email protected]>.

2000-06-20  J.T. Conklin  <[email protected]>

	* gdb.texinfo: Fix typo, $bpnum is set to last breakpoint number.

Fri May 26 15:55:33 2000  Andrew Cagney  <[email protected]>

	* Makefile.in (pdf, gdbint.pdf, gdb.pdf, stabs.pdf): New targets.
  	Generate using pdftex.
	(PDFTEX): Define.
 	(STAGESTUFF, maintainer-clean realclean): Add *.pdf.
	(gdb.texinfo, gdbint.texinfo, stabs.texinfo): When TeX insert the
 	@contents at the start.

2000-05-24  Eli Zaretskii  <[email protected]>

	* gdb.texinfo: Remove duplicate @syncodeindex.  From Brian
        Youmans.

Wed May 24 21:27:58 2000  Andrew Cagney  <[email protected]>

	From Brian Youmans:
	* gdb.texinfo: Fix ``et al.''.

Tue May 23 22:57:41 2000  Andrew Cagney  <[email protected]>

	* Makefile.in (refcard.dvi): Remove quotes around REFEDITS in for
 	loop.

2000-05-19  Jimmy Guo  <[email protected]>

	* configure: Regenerate.

2000-05-17  Eli Zaretskii  <[email protected]>

	* Makefile.in (install-info): Run install-info on installed Info
	files.

Fri May 12 20:18:04 2000  Andrew Cagney  <[email protected]>

	* gdb.texinfo: Add Stan Shebs, et.al. as authors.  Mention
 	Andrew Cagney.

2000-05-09  Eli Zaretskii  <[email protected]>

	* gdb.texinfo: Proofreading changes from Brian Youmans.

2000-05-01  Nick Duffek  <[email protected]>

	* gdb.texinfo (Command Files): Mention -x, use @enumerate for
	startup sequence, minor edits.

2000-05-01  Eli Zaretskii  <[email protected]>

	* annotate.texi: Remove "@syncodeindex fn cp", it causes grief in
	TeX.

	* gdb.texinfo: Add "@syncodeindex fn cp".  Convert all entries
	"@kindex f" into "@kindex f (foo)", otherwise we get index entries
	like `n' and `s' which look weird.  Convert some of the @kindex to
	@vindex, when they refer to variables, not commands.

Sat Apr 29 17:01:04 2000  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Hints): Do not use @value{GDBN in @nodes.

2000-04-23  Eli Zaretskii  <[email protected]>

	* Makefile.in (GDBMI_DIR): New variable.
	(SET_TEXINPUTS): Add $(GDBMI_DIR).
	(SFILES_DOC): Add $(GDBMI_DIR)/gdbmi.texinfo.
	(gdbmi.texinfo): New target, for texi2roff.
	(gdb.me, gdb.ms, gdb.mm): Depend on gdbmi.texinfo.
	(gdb.info, gdb_toc.html): Add "-I ${GDBMI_DIR}".

	* gdb.texinfo (Top): Add GDB/MI to the main menu and @include
	gdbmi.texinfo.
	(Mode Options): Add xref to GDB/MI docs and remove a FIXME
	comment.

2000-04-17  Elena Zannoni  <[email protected]>

	* gdb.texinfo (Files): Update description of add-symbol-file
 	command.

2000-04-17  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Porting GDB): Don't use @value in the node name, it
	prevents the build (and is generally a Bad Idea).

2000-04-17  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Protocol): Prevent makeinfo from complaining about
	a comma inside @var.
	(Command Files): Index markup changes from Dmitry Sivachenko
	<[email protected]>.

2000-04-16  Eli Zaretskii  <[email protected]>

	* Makefile.in (LN_S): Define.
	(gdb-cfg.texi, gdb.dvi, links2roff, inc-hist.texinfo): Don't
	invoke "ln -s" unless it is known to work.

	* configure.in (AC_PROG_LN_S): Add.

2000-04-14  Jim Blandy  <[email protected]>

	* gdbint.texinfo (Pointers Are Not Always Addresses): New manual
	section.
	(Target Conditionals): Document ADDRESS_TO_POINTER,
	POINTER_TO_ADDRESS.

2000-04-11  Daniel Berlin  <[email protected]>

	* gdbint.texinfo: Replaced GDB with @value{GDBN}, @include
	gdb-cfg.texi to get the value.

2000-04-10  Jim Blandy  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Fix
	cross-references.

2000-04-08  Jim Blandy  <[email protected]>

	* gdbint.texinfo (Using Different Register and Memory Data
	Representations): New section.
	(REGISTER_CONVERTIBLE, REGISTER_RAW_SIZE, REGISTER_VIRTUAL_SIZE,
 	REGISTER_VIRTUAL_TYPE, REGISTER_CONVERT_TO_VIRTUAL,
 	REGISTER_CONVERT_TO_RAW): Document.

Mon Apr  3 19:16:32 2000  Andrew Cagney  <[email protected]>

	* gdb.texinfo (Protocol): Deprecate the sequence-id.  Add cindex
 	for acknowledgments.

Tue Mar 28 18:28:45 2000  Andrew Cagney  <[email protected]>

	* gdb.texinfo (Protocol): Replace ``qfThreadExtraInfo'' with
 	qThreadExtraInfo.

2000-03-28  J.T. Conklin  <[email protected]>

	* gdb.texinfo: Clarify which remote debug protocol commands are
	required and which are optional.

Tue Mar 28 16:06:22 2000  Andrew Cagney  <[email protected]>

	* gdb.texinfo: Revert remainder of Fri Mar 24 18:06:34 2000 Andrew
 	Cagney <[email protected]>.  Move @chapter and @node entries
 	back to annotate.texi, rluser.texinfo and inc-hist.texinfo.
	* annotate.texi: Update.

2000-03-28  Stan Shebs  <[email protected]>

	* gdb.texinfo: Update dates, bump to Eighth Edition (note
	expectation of additional changes before release), update
	ISBN, add copy of top-level menu for @ifhtml, remove explicit
	node links, rephrase and/or shorten lines to fix formatting
	problem in both regular and @smallbook formats.
	* annotate.texi: Shorten lines in example, use smallexample
	consistently everywhere.
	* Makefile.in: Add comment about texinfo 4.0 html generation.
	(SFILES_INCLUDED): Add annotate.texi.

2000-03-27  Daniel Berlin  <[email protected]>

        * gdb.texinfo (Debugging Output): Added new section, documenting
        the "set/show debug" commands.

Fri Mar 24 18:06:34 2000  Andrew Cagney  <[email protected]>

	* annotate.texi (Annotations): When GDBN omit @chapter and @node
 	entry.

	* gdb.texinfo: Check for @ifinfo instead of @ifnottex.
	(rluser.texinfo, inc-hist.texinfo, annotate.texi): Add local
 	@chapter and @node entries.

	* gdb.texinfo: Link all top-level nodes.

Fri Mar 24 17:56:48 2000  Andrew Cagney  <[email protected]>

	* Makefile.in (install-info): Create $(infodir) before installing
 	files.

2000-03-23  Fernando Nasser  <[email protected]>

	From David Whedon <[email protected]>
        * gdbint.texinfo : Added paragraphs about command deprecation.

2000-03-22  Daniel Berlin  <[email protected]>

      * gdb.texinfo: Add documentation for the apropos command.

2000-03-20  Michael Snyder  <[email protected]>

	* gdb.texinfo: Add new queries ThreadInfo and ThreadExtraInfo.

2000-03-20  Michael Snyder  <[email protected]>

	* gdb.texinfo: Add white space to prevent overprinting in
	two places.

2000-03-17  Stan Shebs  <[email protected]>

	* gdb.texinfo: Many minor changes from Dmitry Sivachenko
	<[email protected]>, also clarification of allowed content for
	string constants.

2000-03-16  Eli Zaretskii <[email protected]>

	* gdb.texinfo (main menu): Add Annotations.
	(File Options): Add @cindex entries for each command-line option.
	Document --epoch, --annotate, --async, --interpreter, --write,
	--statistics, and --version.

	* annotate.texi: Convert to a chapter.  Use @value{GDBN} instead
	of GDB.

2000-02-23  Jim Blandy  <[email protected]>

	* gdbint.texinfo (FUNCTION_START_OFFSET): Document.

2000-02-22  Jim Blandy  <[email protected]>

	* gdbint.texinfo: Document COERCE_FLOAT_TO_DOUBLE --- the new form.

2000-02-15  Jason Molenda  ([email protected])

	* Makefile.in (diststuff): New target.

2000-02-15  Kevin Buettner  <[email protected]>

	* agentexpr.texi: Fix wording regarding Intel's IA-64
	architecture.  [From Jim Wilson.]

2000-01-16  Tom Tromey  <[email protected]>

	* gdb.texinfo (Breakpoints): Mention breakpoint ranges.
	(Delete Breaks): Mention range arguments.
	(Disabling): Likewise.

2000-01-05  Dmitry Sivachenko <[email protected]>

	* gdb.texinfo:  Wrap "ASCII" in @sc{}; clarify a few sentences.

Wed Dec  8 19:53:08 1999  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (FRAME_CHAIN_VALID): Add the generic frame-chain
 	valid functions.

1999-11-05  Stan Shebs  <[email protected]>

	* gdb.texinfo: Clarify regular expressions used in rbreak.

1999-10-15  Kevin Buettner  <[email protected]>

	* gdbint.texinfo (MEMORY_INSERT_BREAKPOINT,
	MEMORY_REMOVE_BREAKPOINT):  Document.

Thu Oct 14 21:17:17 1999  Andrew Cagney  <[email protected]>

	* gdb.texinfo (remote): Document how GDB ignores the qOffsets BSS
 	offset re-using the DATA offset instead.

1999-10-11  Jim Kingdon  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Add PARM_BOUNDARY.

1999-10-05  Stan Shebs  <[email protected]>

	From Dmitry Sivachenko <[email protected]>:
	* gdb.texinfo: Use GDBP and GDBN everywhere, fix a couple other
	typos.

	* gdb.texinfo: Various minor wording and formatting improvements,
	mentions of additional command-line options.

1999-09-30  Fred Fish  <[email protected]>

	* gdb.texinfo:  Document additional forms of specifying section
	names and addresses for the add-symbol-file command.

1999-09-14  Michael Snyder  <[email protected]>

	* gdbint.texinfo: Fix typo, add the word "have".

1999-09-14  Jim Blandy  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Document the
	SKIP_PERMANENT_BREAKPOINT macro.

1999-09-07  Stan Shebs  <[email protected]>

	* gdb.texinfo: Fiks speling errers.

	* gdb.texinfo: Fix uses of @multitable.

	From Eli Zaretskii  <[email protected]>:
	* gdb.texinfo: Include details specific to DOS host, clarify
 	some confusing language, fix @ref/@xref/@pxref usages, add
	comments about using with optimization, add more indexing,
	fix info about disassembly-flavor.

Tue Sep  7 09:11:24 1999  Kevin Buettner  <[email protected]>

	* gdbint.texinfo (IN_SOLIB_DYNSYM_RESOLVE_CODE,
	SKIP_SOLIB_RESOLVER): Define.

Fri Sep  3 18:05:14 1999  Andrew Cagney  <[email protected]>

	* gdb.texinfo (Protocol): Review.  Add tables describing ``q'' and
 	``g'' packets.

1999-08-30  Stan Shebs  <[email protected]>

	* gdb.texinfo: Create a new "Configurations" chapter with
 	platform-specific info, inline remote.texi and move sections of it
 	into the new chapter, move bits about info proc, heuristic search,
	and register stack into the new chapter.
	* remote.texi: Remove, now part of gdb.texinfo.
	* Makefile.in (SFILES_INCLUDED): Remove ref to remote.texi.

1999-08-27  Jason Molenda  ([email protected])

	* gdbint.texinfo (GDB_TARGET_IS_SUN3, GDB_TARGET_IS_SUN386,
	GDB_TARGET_IS_MACH386): These kludges have gone away.

Wed Aug 25 10:47:03 1999  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Mention
 	TDEPLIBS.

1999-08-20  Stan Shebs  <[email protected]>

	* gdb.texinfo: Remove remaining "HPPA" conditionals, rewrite
	surrounding text to fit HP-UX bits into general info.
	(HPPA-cfg.texi): Remove, no longer useful.

	* gdb.texinfo: Remove explicit links from @node lines, remove
	HP-added "Detailed Node Listing" from main menu which confuses
	things.

	From Dmitry Sivachenko <[email protected]>:
	* gdb.texinfo: Use @value{GDBN} instead of plain GDB, fix grouping
 	in description of `set environment'.

1999-08-17  Stan Shebs  <[email protected]>

	* gdbint.texinfo: Update coding standard to allow pure ANSI/ISO C.

1999-08-12  Ben Elliston  <[email protected]>

	* gdbint.texinfo (Breakpoint Handling): Add missing words.

1999-08-10  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Set Watchpoints): Explain some subtleties about
 	watch, awatch, and rwatch.  Explain why the latter two cannot be
 	set as software watchpoints.  Document that watchpoints for local
 	variables are deleted when the debuggee terminates.

Wed Aug 11 13:18:14 1999  Andrew Cagney  <[email protected]>

	* remote.texi (Protocol): Further clarification of the "qRcmd"
 	packet.  Allow E.. response packet.  "qRcmd" packet is no longer
 	reserved.

1999-08-10  Elena Zannoni  <[email protected]>

	* Makefile.in: Rename inc-hist.texi to inc-hist.texinfo.
	* gdb.texinfo: Ditto.

1999-08-06  Tom Tromey  <[email protected]>

	* gdb.texinfo (KOD): New node.

Fri Aug  6 17:05:48 1999  Andrew Cagney  <[email protected]>

	* remote.texi (Rcmd): Fix minor formatting typos.

Thu Aug  5 17:57:41 1999  Andrew Cagney  <[email protected]>

	* remote.texi (protocol qRcmd): Allow ``OK'' and ``O...'' response
 	packets.

1999-07-14  Jim Blandy  <[email protected]>

	* gdbint.texinfo (PREPARE_TO_PROCEED, ADDR_BITS_REMOVE): Doc
	fixes.

Tue Jun 29 11:43:55 1999  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (SAVE_DUMMY_FRAME_TOS): Define.

Fri Jun 25 11:47:06 1999  Andrew Cagney  <[email protected]>

	* remote.texi (Communication Protocol): ``v'' is in use. Fix
 	numerous formatting errors.  Clarify ``i''.  Mark ``i'', ``Z'',
 	``z'' and ``qRcmd'' as draft instead of reserved.  Identify
 	packets that are not supported on all hosts. Expand examples.
  	Spell check.

1999-06-24  Jason Molenda  ([email protected])

	* Makefile.in: Recognize html, install-html.  Add targets
	to build HTML versions of documentation via texi2html.

Thu Jun 24 15:59:03 1999  Stan Shebs  <[email protected]>

	* gdbint.texinfo (Testsuite): New chapter, information about the
 	testsuite.

Fri Jun 25 02:40:34 1999  Andrew Cagney  <[email protected]>

	* remote.texi (Communication Protocol): Rewrite.

Thu Jun 24 16:59:54 1999  Andrew Cagney  <[email protected]>

	* stabs.texinfo: Fix uses of xref.

Thu Jun 17 17:23:25 1999  Stan Shebs  <[email protected]>

	* gdbint.texinfo: Add an anti-printf exhortation, and update the
	info about patch submission.

Mon Jun  7 15:49:40 1999  Stan Shebs  <[email protected]>

	From Per Bothner  <[email protected]>:
	* gdb.texinfo: Document Chill support.

Fri Jun  4 16:58:22 1999  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (SP_REGNUM, FP_REGNUM, PC_REGNUM): Add reference
 	to corresponding TARGET_READ_reg TARGET_WRITE_reg macros.
  	Document that the value should be greater-than or equal-to zero.
  	(NO_STD_REGS): Document. Deprecate.

Tue Jun  1 15:04:15 1999  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (TARGET_COMPLEX_BIT, TARGET_DOUBLE_COMPLEX_BIT):
 	Document that these are not used.

Thu May 27 09:28:15 1999  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (EXTRACT_STRUCT_VALUE_ADDRESS_P): Document.

Mon May 24 10:07:39 1999  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (FRAME_NUM_ARGS): Update definition.  Parameter
 	numargs was dropped.

Thu May 20 12:26:59 1999  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (FRAMELESS_FUNCTION_INVOCATION): Update.

Tue Apr 27 19:14:20 1999  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (SKIP_PROLOGUE, SKIP_PROLOGUE_FRAMELESS_P):
 	Update.

Thu Apr 22 13:07:37 1999  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (USE_GENERIC_DUMMY_FRAMES): Document.
	(GET_SAVED_REGISTER): Update, not just the a29k uses this.

Wed Apr 21 13:59:01 1999  Dave Brolley  <[email protected]>

	* gdbint.texinfo: Fix typos: $ -> @.

Tue Apr 20 11:59:38 1999  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (REGISTER_NAMES, BREAKPOINT, BIG_BREAKPOINT,
 	LITTLE_BREAKPOINT, LITTLE_REMOTE_BREAKPOINT,
 	BIG_REMOTE_BREAKPOINT): Deprecate in favor of REGISTER_NAME and
 	BREAKPOINT_FROM_PC.

Mon Apr 12 16:00:44 1999  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (CALL_DUMMY_STACK_ADJUST_P,
 	CALL_DUMMY_STACK_ADJUST): Document.

Thu Apr  8 17:23:15 1999  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (CALL_DUMMY_P, CALL_DUMMY_WORDS,
 	SIZEOF_CALL_DUMMY_WORDS, CALL_DUMMY): Define.

1999-04-02  Stan Shebs  <[email protected]>

	* gdbint.texinfo (MAINTENANCE_CMDS): Remove ref, since it no
	longer exists.

Tue Mar  9 19:25:11 1999  Stan Shebs  <[email protected]>

	* gdb.texinfo, remote.texi, all-cfg.texi, HPPA-cfg.texi: Remove
 	nearly all @ifset/@ifclear conditionals; nobody uses them, and
 	they make the manual source incomprehensible.
	* h8-cfg.texi: Remove, hasn't been used in years.

Thu Feb 11 18:00:59 1999  Stan Shebs  <[email protected]>

	* gdb.texinfo: Update the credits.

Mon Feb  8 17:33:57 1999  Stan Shebs  <[email protected]>

	* gdb.texinfo: Fix mistakes noticed in printout of last
	draft, add Alpha to discussion of heuristic fence post.

Fri Feb  5 17:20:00 1999  Stan Shebs  <[email protected]>

	* gdb.texinfo, remote.texi: Many changes; update to Seventh
 	Edition, merge some HP changes into mainline, describe some
 	previously undocumented features, describe more of the target
 	commands available, eliminate obsolete section on renamed
 	commands.
	* all-cfg.texi, HPPA-cfg.texi: Remove some obsolete conditionals.

Wed Jan 20 17:47:45 1999  Stan Shebs  <[email protected]>

	* gdb.texinfo: Make many HPPA conditionals unconditional,
	including catchpoint description, since now on for all configs.
	* all-cfg.texi: @clear HPPA, since is mainly for very HP-specific
	specializations.

Thu Jan 14 17:10:12 1999  Stan Shebs  <[email protected]>

	* Makefile.in (GDBvn.texi): Fix match expression to work with
	current format of VERSION in gdb/Makefile.in.
	* gdb.texinfo: Fix node ref to match new readline.

Wed Jan 13 10:38:40 1999  Edith Epstein  <[email protected]>

	* gdb.texinfo: Changes made as part of a project to merge in
	  changes made by HP. Documentation makes extensive use of
	  @ifclear HPPA and @ifset HPPA. The HP manual omits doumentation
	  on remote debugging. There are differences in documentation
 	  (HP vs.  non-HP) on C++ support (aCC vs. gnu gcc++). Also,
	  the HP manual discusses catchpoints, hardware watchpoints, and
	  some HPUX specific limitations for shared library support.

	  There are also a number of @node changes.

1999-01-12  Jason Molenda  ([email protected])

	* gdbint.texinfo (Formatting): Disambiguate a sentence.
	(C Usage): Same.

Wed Jan  6 11:55:34 1999  David Taylor  <[email protected]>

	The following changes were made by Edith Epstein
 	<[email protected]> as part of a project to merge in changes
 	made by HP.

	* HPPA-cfg.texi: new file.

	* all-cfg.texi: set HPPA for HP PA-RISC targets.

	* refcard.tex: change documentation about catch.
	  removed info catch.

Mon Jan  4 18:29:18 1999  Stan Shebs  <[email protected]>

	* gdbint.texinfo: Expand on GDB's coding standards,
	specify the use of arg names with prototypes.

1998-12-14  J.T. Conklin  <[email protected]>

	* gdb.texinfo: Fix tipo.

Sun Dec 13 10:27:59 1998  Andrew Cagney  <[email protected]>

	* gdbint.texinfo: Document TARGET_BYTE_ORDER_DEFAULT and
 	TARGET_BYTE_ORDER_SELECTABLE_P.

Thu Dec 10 16:07:09 1998  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (FRAME_FIND_SAVED_REGS): Document.

1998-12-09  Jim Blandy  <[email protected]>

	* agentexpr.texi: New file.

Wed Dec  9 21:13:57 1998  Andrew Cagney  <cagney@chook>

	* gdbint.texinfo (REGISTER_NAME): Replace REGISTER_NAMES.

1998-12-03  J.T. Conklin  <[email protected]>

	* remote.texi: Changed wording that implied that the GDB remote
	protocol caches register values instead of GDB itself.

Tue Dec  1 17:45:43 1998  Stan Shebs  <[email protected]>

	* gdbint.texinfo: Add some info about symbol readers.
	(CHILL_PRODUCER, etc): Comment out descriptions, not useful.
	(IN_SOLIB_CALL_TRAMPOLINE): Rename info from IN_SOLIB_TRAMPOLINE.
	(IN_SOLIB_RETURN_TRAMPOLINE): Describe.
	(KERNEL_DEBUGGING, MIPSEL): No info about these, remove.

Mon Nov 30 11:32:21 1998  Andrew Cagney  <cagney@chook>

	* gdbint.texinfo (FRAME_CHAIN_VALID_ALTERNATE):

Sat Nov 28 13:45:53 1998  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (INNER_THAN): Update, now takes parameters.

Fri Nov 27 12:39:45 1998  Andrew Cagney  <cagney@chook>

	* gdbint.texinfo (NO_SINGLE_STEP): Replace with
 	SOFTWARE_SINGLE_STEP_P and SOFTWARE_SINGLE_STEP.

Wed Oct 14 10:02:40 1998  Andrew Cagney  <[email protected]>

	* gdbint.texinfo: Fix minor typos.

Wed Sep 30 18:03:19 1998  Stan Shebs  <[email protected]>

	* gdbint.texinfo: Complete overhaul.  Group descriptions more
	logically, add more info on generic algorithms, remove much
	obsolete and/or wrong material.

Fri Jul 24 17:51:38 1998  Ian Lance Taylor  <[email protected]>

	* stabs.texinfo (Method Type Descriptor): Expand and correct.

Mon May  4 10:37:12 1998  Brian Youmans ([email protected])

	* refcard.tex:  Copyright, address updates.

Tue Apr 21 18:09:56 1998  Stan Shebs  <[email protected]>

	* gdb.texinfo (EDITION, DATE): Update and change to use ordinals
	for the edition instead of confusing GDB-version-like numbers.

Mon Apr 13 14:05:00 1998  Fred Fish  <[email protected]>

	* gdb.texinfo (hbreak, watch): Fix typo, "date" -> "data".

Thu Apr  2 16:52:44 1998  Jason Molenda  ([email protected])

        * LRS: Reformat a bit to keep text under 80 columns.

Thu Apr  2 16:10:36 1998  Stan Shebs  <[email protected]>

	* gdb.texinfo: Add some credits, mention bug monitor.
	* remote.texi: Mention mips monitor targets.
	* gdbint.texinfo: Describe SP_REGNUM, STEP_SKIPS_DELAY.

Mon Feb  2 17:13:03 1998  Stan Shebs  <[email protected]>

	* gdbint.texinfo: Remove obsolete mentions of pinsn.c and opcode.h
 	files, finish sorting of host vs target vs native macros, describe
 	some more of them.

Tue Jan 13 16:44:50 1998  Fred Fish  <[email protected]>

	* gdbint.texinfo (Host Conditionals): Document change from
	using NO_MMALLOC to it's inverse, USE_MMALLOC.

Mon Nov 24 13:55:21 1997  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Host Conditionals): Document
 	PRINTF_HAS_LONG_DOUBLE, SCANF_HAS_LONG_DOUBLE, HAVE_LONG_DOUBLE.

Fri Jul  4 14:52:31 1997  Ian Lance Taylor  <[email protected]>

	* gdbint.texinfo (Host Conditionals): Add CRLF_SOURCE_LINES.
	Document LSEEK_NOT_LINEAR.

Tue Mar 25 14:44:09 1997  Ian Lance Taylor  <[email protected]>

	* stabs.texinfo (Stab Section Basics): Make it clear that only
	some versions of the GNU linker remove the leading N_UNDF symbol.

Thu Feb 27 17:45:19 1997  Ian Lance Taylor  <[email protected]>

	* stabs.texinfo (String Field): Document type number pairs here,
	instead of in the Sun specific section.
	(Include Files): The GNU linker supports the N_BINCL
	optimization.  Clarify the N_BINCL value, and what it is used
	for.
	(Procedures): Document N_FUN with an empty string to mark the end
	of a function.
	(Typedefs): Mention that Sun compilers may use N_GSYM for a type.
	(Sun Differences): Remove this node, as the information is now
	elsewhere in the main document.
	(Stab Section Basics): Mention that the GNU linker may optimize
	stabs and remove the leading N_UNDF symbol.

Mon Dec  9 12:23:32 1996  Roland Pesch  <[email protected]>

	* gdb.texinfo, refcard.tex: Restore author credit

Wed Oct  2 22:01:36 1996  Fred Fish  <[email protected]>

	* gdbint.texinfo (SIGTRAMP_START, SIGTRAMP_END): Update
	documentation to account for START and END macros taking
	one arg.

Thu Aug 22 17:59:03 1996  Fred Fish  <[email protected]>

	From: Eberhard Mattes <[email protected]>
	* gdb.texinfo (Frames): Fix typo.

Tue Jul 23 10:06:20 1996  Fred Fish  <[email protected]>

	* gdbint.texinfo (NO_SINGLE_STEP): Document that single_step takes
	a target_signal as arg type, not a pid.

Fri Jul 12 11:10:05 1996  Stu Grossman  ([email protected])

	* gdb.texinfo:  Document `set assembly-language'.

Thu Jul 11 13:50:28 1996  Stan Shebs  <[email protected]>

	* remote.texi: Update list of stubs in the GDB distribution.

Fri Jul  5 15:38:54 1996  Fred Fish  <[email protected]>

	* gdbint.texinfo (NO_MMCHECK): Renamed from NO_MMALLOC_CHECK.
  	Also document that some systems can use mmalloc but must define
 	this if their C runtime allocates memory that is later freed.
	(MMCHECK_FORCE): Document new macro.

Fri Jun 28 22:17:10 1996  Dawn Perchik  <[email protected]>

	* remote.texi: Add documentation for target Sparclet.

Mon Jun 24 18:12:22 1996  Jason Molenda  ([email protected])

	* Makefile.in (srcdir, VPATH, prefix, infodir, INSTALL,
	INSTALL_PROGRAM, INSTALL_DATA): Use autoconf set values.
	* configure.in: Rewritten for autoconf.
	* configure: New.

Mon Jun 17 10:43:41 1996  Fred Fish  <[email protected]>

	* Makefile.in (DVIPS): New define, set to dvips.
	(dvi): Add stabs.dvi.
	(ps): New target.
	(all-doc): Depend on info, dvi, and ps targets.
	(STAGESTUFF): Add *.ps and *.dvi files.
	(clean-info, clean-dvi): Remove.
	(mostlyclean): Does not depend upon clean-info or clean-dvi,
	rules completely rewritten.
	(maintainer-clean): Remove clean-info and clean-dvi
	dependencies and put their actions in the rules.
	(gdb.ps): New target
	(gdb.dvi, gdbgui.dvi, gdbint.dvi, stabs.dvi): Remove
	intermediate TeX files, whether they have 2 or 3 character
	extensions.
	(gdbint.ps): Add target and rules.
	(gdb-internals): Delete unused target.
	(Makefile): Depends upon config.status also.

Sat Mar 30 15:46:58 1996  Fred Fish  <[email protected]>

	* gdbint.texinfo (CC_HAS_LONG_LONG): Clarify when/how this is
	set.

Sat Mar 16 15:10:20 1996  Fred Fish  <[email protected]>

	From Peter Schauer <[email protected]>
	* gdb.texinfo (Expressions): Fix erroneous array constant example.

Sat Mar 16 13:28:45 1996  Fred Fish  <[email protected]>

	* gdb.texinfo: Add missing "@bullet" to some "@itemize" commands.

Sat Feb 10 03:28:36 1996  Peter Schauer  ([email protected])

	* gdb.texinfo (Print settings):  Document
	`set/show print static-members' commands.

Wed Jan 10 14:16:37 1996  Fred Fish  <[email protected]>

	* gdbint.texinfo (Native): Document name change, coredep.c to
	core-aout.c.

Wed Dec 13 12:35:28 1995  Ian Lance Taylor  <[email protected]>

	* stabs.texinfo (Include Files): Document the values the SunOS4
	linker creates for N_BINCL/N_EINCL/N_EXCL stabs.

Fri Dec  8 21:08:44 1995  Fred Fish  <[email protected]>

	* gdbint.texinfo (Releases): Change gdb.tar.Z to gdb.tar.gz.
	Fix typo.

Fri Dec  1 11:07:50 1995  Fred Fish  <[email protected]>

	* gdbint.texinfo (Releases): Make "gdb.tar.gz" rather than
	"gdb.tar.Z".

Wed Sep 20 13:14:10 1995  Ian Lance Taylor  <[email protected]>

	* Makefile.in (maintainer-clean): New target, synonym for
	realclean.

Thu Aug  3 10:45:37 1995  Fred Fish  <[email protected]>

	* Update all FSF addresses except those in COPYING* files.

Wed Jul 19 18:43:03 1995  Stan Shebs  <[email protected]>

	From Richard Earnshaw ([email protected]):
	* gdb.texinfo (convenience variables): Document $_exitcode.
	(quit): Document optional expression to use as exit code.

Thu Jun 22 21:27:33 1995  Victoria Mixon  <[email protected]>

	* gdb.texinfo, remote.texi: Brought up to date with various
	GDB changes.

Tue Jun 20 14:35:38 1995  Stan Shebs  <[email protected]>

	* gdb.texinfo: Update dates and versions, fix comments about
	hardware watchpoints in future releases and about the
	sharedlibrary command.

Mon May  8 09:30:36 1995  Jim Kingdon  ([email protected])

	* stabs.texinfo: Remove node `XCOFF differences'.  Describe value of
	C_FUN stab.  Other cleanups.

Wed Apr 19 07:02:19 1995  Jim Kingdon  ([email protected])

	* remote.texi (Bootstrapping): Clarify that flush_i_cache is only
	for the sparc stub.

Tue Apr 11 11:41:49 1995  Jim Kingdon  ([email protected])

	* annotate.texi: Clarify which addresses have differing formats
	depending on the language and which do not.

Tue Mar 28 16:56:22 1995  J.T. Conklin  <[email protected]>

	* remote.texi (NetWare): Changed example to use BOARD= instead of
	  NODE= argument to reflect correspoding change to gdbserve.nlm.

Fri Mar 17 06:47:02 1995  Jim Kingdon  ([email protected])

	* stabs.texinfo (Negative Type Numbers): Mention the fact that
	GDB, as well as AIX dbx, supports the size type attribute.

Thu Mar 16 12:11:32 1995  Jim Kingdon  ([email protected])

	* stabs.texinfo (Negative Type Numbers): Document types -31 to -34.

Mon Mar 13 16:49:13 1995  Per Bothner  <[email protected]>

	* gdb.texinfo (Define):  Document $arg0... arguments to commands,
	and new 'if' and 'while' commands.

Fri Feb 17 15:24:35 1995  Per Bothner  <[email protected]>

	* gdb.texinfo (Artificial arrays):  Note use of coerce-to-array-type.

Wed Feb 15 11:59:18 1995  J.T. Conklin  <[email protected]>

	* all-cfg.texi: New flag, GDBSERVE, for NetWare's gdbserve.nlm.
	* remote.texi (NetWare): New node, how to use gdbserve.nlm on
	  NetWare targets.  Mostly stolen from the Server node.

Fri Feb 10 20:20:08 1995  Jim Kingdon  ([email protected])

	* gdb.texinfo (Setting): Talk about the language of a source file
	versus the working language.  The old documentation did not match
	what GDB did.

Wed Feb  1 20:26:36 1995  Jim Kingdon  ([email protected])

	* stabs.texinfo (Source Files): Document N_SO used to mark the end
	of a source file.

Mon Jan 23 14:23:37 1995  Jim Kingdon  ([email protected])

	* gdb.texinfo (Processes): New node.

Tue Jan 17 14:09:03 1995  Ian Lance Taylor  <[email protected]>

	* remote.texi: Update documentation of set/show mipsfpu.

Fri Jan  6 17:17:28 1995  Stan Shebs  <[email protected]>

	* gdbgui.texinfo: New file, manual for GUI (gdbtk) users.
	* Makefile.in (gdbgui.dvi, gdbgui.info): New actions.

Sun Sep  4 16:47:21 1994  Stan Shebs  ([email protected])

	* gdbint.texinfo: Removed mentions of some incorrectly placed and
	obsolete conditionals, described some others.

Mon Aug  1 15:42:39 1994  Jim Kingdon  ([email protected])

	* gdbint.texinfo: Remove references to BROKEN_LARGE_ALLOCA and
	SET_STACK_LIMIT_HUGE; they were removed from GDB 14 May 1994.

Mon Aug  1 15:12:02 1994  Stan Shebs  ([email protected])

	* gdbint.texinfo: Put regex conditionals in their own table.

Tue Jul 26 18:32:52 1994  Stan Shebs  ([email protected])

	* gdbint.texinfo: Removed mentions of many obsolete conditionals,
	described or fixed the descriptions of many others.

Sun Jul 17 14:14:03 1994  Stan Shebs  ([email protected])

	* gdb.texinfo: Add some more credits.
	* gdbint.texinfo: Capitalize GDB consistently, describe some
	macros and remove some.

Thu Jul 14 18:43:17 1994  Stan Shebs  ([email protected])

	* gdbint.texinfo: Removed mentions of many incorrectly placed and
	obsolete conditionals, described some others.

Tue Jul 12 12:23:15 1994  Peter Schauer  ([email protected])

	* gdb.texinfo (help targets):  Changed to `help target', which
	is the correct gdb command.

Wed Jun 22 18:00:51 1994  Jim Kingdon  ([email protected])

	* annotate.texi (TODO): New node, for keeping track of annotations
	suggested but not yet implemented.

Wed Jun  1 16:10:45 1994  Jim Kingdon  ([email protected])

	* stabs.texinfo (Statics): Value of xcoff C_BSTAT points to
	another symbol, it is not the address itself.

Thu May  5 20:23:36 1994  Stan Shebs  ([email protected])

	* stabs.texinfo (Stab Section Basics): Add comment about alignment
	of stabs-in-coff sections.

Wed May  4 06:26:11 1994  Jim Kingdon  ([email protected])

	* annotate.texi: Change edition to 0.5 and date to May 1994.
	Add index.
	(Frames): New node, for frame annotation.
	(Displays): New node, for display annotation.

	* remote.texi (MIPS Remote): Say that set timeout doesn't apply
	when waiting for your program to stop.

Fri Apr 29 18:24:46 1994  Jim Kingdon  ([email protected])

	* annotate.texi (Breakpoint Info): Document annotation of header
	fields and record annotation.

Thu Apr 28 07:44:28 1994  Jim Kingdon  ([email protected])

	* annotate.texi: New file, to document annotations.

Thu Apr 21 14:20:51 1994  Jim Kingdon  ([email protected])

	* Makefile.in (clean): Don't remove GDBvn.texi (apparently on Jan
	16 I meant to make this change but did not).  Do remove gdb-cfg.texi.

Wed Apr 20 11:22:48 1994  Jim Kingdon  ([email protected])

	* stabs.texinfo (Stab Section Basics): Say what is in .stab
	section, and say n_strx field is compilation unit relative.
	* stabs.texinfo: Don't use @code for a.out when it is the name of
	an object file format.

Wed Apr 13 20:29:54 1994  Jim Kingdon  ([email protected])

	* gdb.texinfo: Refer to file names, not path names, per rms
	convention.
	(Arguments): Fix typo.

Thu Mar 24 08:09:12 1994  Jim Kingdon  ([email protected])

	* stabs.texinfo (Global Variables): Talk about stabs in files
	where variables are referenced, but not defined.

Wed Mar 23 07:16:36 1994  Jim Kingdon  ([email protected])

	* stabs.texinfo: Move stuff on @ and # type descriptors from node
	Cplusplus to new nodes Member Type Descriptor and Method Type
	Descriptor.  Re-write stuff for #.

Wed Mar 16 08:20:19 1994  Jim Kingdon  ([email protected])

	* gdb.texinfo (Print Settings): Don't document "set print
	fast-symbolic-addr off".  The bug which it worked around was fixed
	on 25 Feb 94 in coffread.c, so I'm nuking the command.

	* stabs.texinfo (Alternate Entry Points): New node, rewritten from
	N_ENTRY node.

	* stabs.texinfo (Type Descriptors): Add 'Y' type descriptor.

Tue Mar 15 08:43:02 1994  Jim Kingdon  ([email protected])

	* gdbint.texinfo (Host Conditionals, Target Conditionals): Remove
	references to ieee-float.c.

Fri Mar 11 08:09:40 1994  Jim Kingdon  ([email protected])

	* gdb.texinfo (Set Breaks): Update documentation for tbreak to
	match what the code actually does.

Wed Mar  9 19:43:05 1994  Jim Kingdon  ([email protected])

	* stabs.texinfo (Symbol Descriptors): Add OS9000 symbol descriptor s.

Tue Mar  1 17:04:43 1994  Jim Kingdon  ([email protected])

	* stabs.texinfo (Type Descriptors): Add OS9000 type descriptors c,
	i, and b.

Wed Feb 23 10:44:18 1994  Jim Kingdon  ([email protected])

	* stabs.texinfo: Document N_RBRAC as function relative for COFF as
	well as for ELF and SOM.  Unify the descriptions of ELF and SOM
	as "stabs in sections" rather than just saying "ELF and SOM".
	Also make that stuff apply to COFF.

Fri Feb 18 08:25:58 1994  Jim Kingdon  ([email protected])

	* gdb.texinfo (Formatting Documentation): Change GhostScript to
	Ghostscript.

Fri Feb  4 06:31:31 1994  Jim Kingdon  ([email protected])

	* gdb.texinfo (Continuing and Stepping): When talking about "step"
	versus functions without line numbers, also mention stepping into
	them as well as "step" when you are in them.  Tell the user how to
	deal with the situation.  Add comment about "debugging information".

Thu Feb  3 11:39:59 1994  Jim Kingdon  ([email protected])

	* stabs.texinfo (Enumerations): Document restriction on where
	enumeration types can appear and still win with GDB.

Wed Feb  2 11:29:17 1994  Jim Kingdon  ([email protected])

	* stabs.texinfo (Negative Type Numbers): Document format for type
	-16.

Thu Jan 27 16:53:56 1994  Jim Kingdon  ([email protected])

	* gdb.texinfo (Selection, Frame Info): Update information about
	arbitrary frame specficiations.

Wed Jan 26 15:31:57 1994  Roland H. Pesch  ([email protected])

	* gdb.texinfo, remote.texi: general editing pass prior to Net release

Tue Jan 25 12:12:04 1994  Jim Kingdon  ([email protected])

	* stabs.texinfo (String Field): Discuss continuing stabs with ?.

Wed Jan 19 06:39:24 1994  David J. Mackenzie  ([email protected])

	* stabs.texinfo (Non-Stab Symbol Types): Mention N_SET* | N_EXT.

Sun Jan 16 12:43:32 1994  Jim Kingdon  ([email protected])

	* stabs.texinfo: Re-do stuff about C_BSTAT and move from XCOFF
	Differences node to Statics node.
	(Statics): Discuss XCOFF use of V symbol descriptor.

	* Makefile.in: Remove refcard.dvi and GDBvn.texi in realclean,
	not clean.

Wed Jan 12 21:29:54 1994  John Gilmore  ([email protected])

	* gdb.texinfo (Print Settings): Document `set print
	fast-symbolic-addr' and improve the doc for some other
	`set print's.

Mon Jan  3 17:23:07 1994  Jim Kingdon  ([email protected])

	* stabs.texinfo (String Field): Talk about defining several type
	numbers at once.
	Fix lint regarding changing node ELF Transformations to
	ELF and SOM Transformations.

Fri Dec 31 00:42:43 1993  John Gilmore  ([email protected])

	* stabs.texinfo:  Insert Peter Kessler's name as inventor (I think).

Tue Dec 28 09:30:40 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Cross-References): `::' is for nested types only
	within <>.
	(Structures): Document static members.

Mon Dec 27 13:55:04 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo: Document S type attribute.

Sun Dec 26 20:46:36 1993  Jeffrey A. Law  ([email protected])

	* stabs.texinfo: Add notes about stabs-in-som where appropriate.

Fri Dec  3 19:13:19 1993  John Gilmore  ([email protected])

	* gdbint.texinfo:  Fix a few typos.

Sun Nov 28 18:06:25 1993  Roland H. Pesch  ([email protected])

	* gdb.texinfo, remote.texi: formatting improvements

	* gdb.texinfo (New Features): mention threads.
	(Summary, C): fix xrefs in newly contributed text.
	(Threads): index entries, clarifications, example
	(passim): minor typos fixed, phrasing improvements

	* remote.texi (Bootstrapping): rephrase text on ^C and add index
	entries; (Server): explain use of gdbserver w/real-time systems,
	add example of conflicting TCP port; (MIPS Remote) break up
	running text into table, highlighting commands, and add example.

Wed Nov 24 14:15:56 1993  Roland H. Pesch  ([email protected])

	* refcard.tex: avoid bad linebreaks even when REFEDITS=psrc.sed

Fri Nov 12 16:10:58 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Nested Symbols): New node.
	(String Field, Symbol Descriptors, Cross-References): Refer to it.

Thu Nov 11 13:26:45 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Stabs in ELF): Clarify how Bbss.bss work with respect
	to picking which Bbss.bss symbol to use, and (because there seems to
	be no good way of doing it) re-write some of the text to make it
	sound like Bbss.bss isn't such a great idea after all (as currently
	designed).

	* gdb.texinfo (C): In addition to saying people have to use g++ for
	good results, say they have to use stabs.  Specifically say cfront
	doesn't work well.
	(Summary): Merge in information on Modula-2, Pascal, and Chill from
	the gdb README.  Add xrefs to places where the support for the various
	languages is described in detail.

Mon Nov  8 11:47:34 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo: Clean up stuff about visibility and virtual
	characters.

	* stabs.texinfo (N_M2C): Cite Sun doc.

Fri Nov  5 16:27:27 1993  Roland H. Pesch  ([email protected])

	* gdb.texinfo: updates re threads.
	* remote.texinfo: avoid index entries starting with digits.

Tue Nov  2 09:08:37 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Enumerations): Talk about large, negative and
	octal values.  Clean up cross reference to type attributes.
	(String Field): Say that GDB 4.11 supports size attribute.

Sun Oct 31 13:31:10 1993  Jim Kingdon  ([email protected])

	* remote.texi (VxWorks Remote): Clarify that rebuilding VxWorks kernel
	is a mandatory step.  Make the stuff about that more concise.

Wed Oct 27 00:25:46 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Class Names): New node.

	* gdb.texinfo (Command Files): Explain order of init file reading.

	* remote.texi (Bootstrapping): Talk about getting the serial driver
	to deal with ^C sent by gdb to stop the remote system.

Mon Oct 25 03:25:41 1993  Tom Lord  ([email protected])

	* libgdb.texinfo (I/O): incorporated better phrasing from rich.

	* libgdb.texinfo (Defining Commands): made the DOC arg
	to gdb_define_app_command a char * instead of char **
	per a suggestion from kingdon.

	* libgdb.texinfo: total rewrite from a different starting
	premise.

Wed Oct 20 18:07:44 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Local Variable Parameters): Re-write paragraph on
	floats passed as doubles (to improve clarity).

Tue Oct 19 14:21:18 1993  Roland H. Pesch  ([email protected])

	* gdb.texinfo (Source Path): index entries for $cwd, $pdir

	* a4rc.sed: update to work with Andreas Vogel papersize params

	* refcard.tex: use Andreas Vogel simplifications of papersize
	params; remove useless version info; update copyright date.

Tue Oct 19 10:46:22 1993  Jim Kingdon  ([email protected])

	* gdb.texinfo (Symbols): Add class NAME to doc for ptype.

Tue Oct 12 09:11:45 1993  Jim Kingdon  ([email protected])

	* gdb.texinfo (Files): Say what address the load command loads it at.

	* stabs.texinfo (Common Blocks): Minor cleanups.

	* stabs.texinfo: Update ld stabs in elf relocation to reflect the fact
	that Sun has backed away from the linker kludge and thus the relevant
	issue is changes to the SunPRO tools, not the Solaris linker.

	* stabs.texinfo (Traditional Integer Types): Clean up description
	of octal bounds a little bit.  Document extra leading zeroes.

Thu Oct  7 16:15:37 1993  Jim Kingdon  ([email protected])

	* gdb.texinfo (Signaling): Update for symbolic symbol names
	and add a section explaining the difference between the GDB
	signal command and the shell kill utility.

Wed Oct  6 13:23:01 1993  Tom Lord  ([email protected])

	* libgdb.texinfo: added `@' to braces that were unescaped.

Mon Oct  4 10:42:18 1993  Tom Lord  ([email protected])

	* libgdb.texinfo: new file.  Spec for the gdb library.

Sun Oct  3 15:26:56 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Include Files): Fix typo (start -> end).

Thu Sep 30 18:24:56 1993  Roland H. Pesch  ([email protected])

	* gdb.texinfo, remote.texi: assorted small improvements, mostly
	from Melissa at FSF's editing pass.

Thu Sep 30 11:54:38 1993  Jim Kingdon  ([email protected])

	* gdb.texinfo: Remove stuff about ar and 14 character filenames.
	I believe this was fixed by the 13 Sep 89 change to print_frame_info.
	Also, modern versions of ar like BSD 4.4 or SVR4 don't have this bug.

Wed Sep 22 21:22:11 1993  Jim Kingdon  ([email protected])

	* remote.texi (Bootstrapping): Discuss 386 call gates.

Sat Sep 18 17:10:44 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Based Variables): New node.

Thu Sep 16 17:48:55 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Negative Type Numbers): Re-write discussions of
	names, sizes, and formats to suggest how not to lose.

Sat Sep 11 09:35:11 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Methods): Fix typo.

Fri Sep 10 06:34:20 1993  David J. Mackenzie  ([email protected])

	* gdb.texinfo: Fix a few typos.

Wed Sep  8 09:11:52 1993  Jim Kingdon  ([email protected])

	* gdb.texinfo: Clarify how well it works with Fortran.

	* stabs.texinfo (Stabs In ELF, Statics, ELF Transformations):
	More on relocating stabs in ELF files.

Tue Sep  7 13:45:02 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Stabs In ELF): Talk about N_FUN value.

Mon Sep  6 19:23:18 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Local Variable Parameters): Talk about nameless
	parameters on VAX.

Fri Sep  3 17:06:08 1993  Roland H. Pesch  ([email protected])

	* gdb.texinfo: @up/@down -> @raisesections/@lowersections

Fri Sep  3 12:04:15 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo: Make info author notice match the TeX author notice.

Tue Aug 31 13:21:06 1993  David J. Mackenzie  ([email protected])

	* stabs.texinfo: Initial-caps all words in node names and
	non-trivial words in section names.

Mon Aug 30 11:13:16 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo: Many minor cleanups.

	* stabs.texinfo: Remove @deffn except from Expanded Reference node.

Sat Aug 28 12:08:09 1993  David J. MacKenzie  ([email protected])

	* stabs.texinfo: Remove full description of big example.
	It's not really helpful; just use pieces of it where appropriate.
	Add more Texinfo formatting directives (@samp, etc.).
	Use @deffn to define stab types.
	Eliminate some wordiness.  Break up some nodes.
	Add an (alphabetized) index of symbol types.
	Use consistent capitalization style in node and section names.

Thu Aug 26 06:36:31 1993  Fred Fish  ([email protected])

	* gdb.texinfo:  Change typo "Two two" to "The two".

Sun Aug 22 12:15:18 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (XCOFF-differences): Remove references to
	non-existent types N_DECL and N_RPSYM.

	* stabs.texinfo (String Field): Say that type attributes bug is
	fixed in GDB 4.10, since it is.

	* stabs.texinfo: Clean up djm cleanups, and more cleanups of my own.

Sat Aug 21 04:32:28 1993  David MacKenzie  ([email protected])

	* stabs.texinfo: Formatting cleanups.

Fri Aug 20 20:49:53 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo: When explaining the n_type of a stab, standardize
	how we do it ('#' as a comment indicator, "36 is N_FUN" as text,
	no tabs, use @r).
	(Global Variables): Clean up.

Tue Aug 17 15:57:27 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Stack Variables): Re-write.

Mon Aug 16 21:20:08 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Stabs-in-elf): Talk about getting the start
	addresses of a source file.  Also revise formatting.
	Change "object module" or "object file" to "source file".
	Various: Miscellaneous cleanups.

Thu Aug 12 15:11:51 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo: Point to mangling info in gcc's gpcompare.texi.

Tue Aug 10 16:57:49 1993  Stan Shebs  ([email protected])

	* gdbint.texinfo: Removed many nonsensical machine-collected
	host and target conditionals, described some of the remainder.

Tue Aug 10 13:28:30 1993  Jim Kingdon  ([email protected])

	* gdbint.texinfo (Getting Started): Use @itemize, not @table.

	* gdbint.texinfo (Top): Add name to @top line, and re-write the
	paragraph which follows.

	* gdbint.texinfo (Host): Use @code not @samp for Makefile
	variables.  Looks better and avoids overful hbox.

Fri Jul 30 18:26:21 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Procedures): Improve stuff on nested functions.

Thu Jul 29 15:10:58 1993  Roland H. Pesch  ([email protected])

	* remote.texi: (MIPS Remote) clearer doc for set/show timeout,
	retransmit-timeout

Thu Jul 29 13:16:09 1993  Jim Kingdon  ([email protected])

	* gdbint.texinfo: Update statement about `some ancient Unix
	systems, like Ultrix 4.0' to Ultrix 4.2.

Wed Jul 28 15:26:53 1993  Roland H. Pesch  (pesch@el_bosque.cygnus.com)

	* h8-cfg.texi, all-cfg.texi: new flag GDBSERVER

	* Makefile.in: depend on remote.texi rather than gdbinv-s.texi

	* remote.texi: (Server) New node on gdbserver.  (Remote Serial,
	ST2000 Remote, MIPS Remote): mention `host:port' syntax for TCP.

	* remote.texi: new name for former gdbinv-s.texi

	* gdb.texinfo: use remote.texi rather than gdbinv-s.texi

Wed Jul 28 08:26:24 1993  Ian Lance Taylor  ([email protected])

	* gdbinv-s.texi: Documented timeout and retransmit-timeout
	variables for MIPS remote debugging protocol.

Mon Jul 26 13:00:09 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Negative Type Numbers): FORTRAN LOGICAL fix.

Tue Jul 20 16:30:41 1993  Jim Kingdon  ([email protected])

	* Makefile.in (refcard.dvi): Use srcdir where necessary.

Mon Jul 19 12:02:50 1993  Roland H. Pesch  ([email protected])

	* gdb.texinfo: repair conditional bugs in text markup

Fri Jul 16 18:57:50 1993  Roland H. Pesch  ([email protected])

	* gdb.texinfo, all-cfg.texi, h8-cfg.texi: introduce MOD2 switch
	to select Modula-2 material.

Thu Jul 15 13:15:01 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo: Cleanups regarding statics.

	* gdbinv-s.texi (Bootstrapping): Document exceptionHandler.
	(Debug Session): Mention exceptionHandler.  Add xref to Bootstrapping.

Mon Jul 12 13:37:02 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo: N_MAIN is sometimes used for C.

Fri Jul  9 09:47:02 1993  Peter Schauer  ([email protected])

	* gdbint.texinfo (Host, Target Conditionals): Remove TM_FILE_OVERRIDE.

Tue Jul  6 12:41:28 1993  John Gilmore  ([email protected])

	* gdbint.texinfo (Target Conditionals): Remove NO_TYPEDEFS,
	removed from the code by Kingdon.

Tue Jul  6 12:24:34 1993  Jim Kingdon  ([email protected])

	* gdb.texinfo (Break Commands): Remove stuff about flushing terminal
	input when evaluating breakpoint conditions; the bug has been fixed.

	* gdb.texinfo (Continuing and Stepping): Argument to "continue"
	sets the ignore count to N-1, not to N.

Thu Jul  1 14:57:42 1993  Roland H. Pesch  ([email protected])

	* refcard.tex (\hoffset): correct longstanding error to match
	  intended offset; avoids cutting off edge on some printers

Wed Jun 30 18:23:06 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Parameters): Say that order of stabs is significant.

Fri Jun 25 21:34:52 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Common Blocks): Say what Sun FORTRAN does.

Fri Jun 25 16:15:10 1993  Roland H. Pesch  ([email protected])

	* Makefile.in: (REFEDITS) new var to control whether PS or CM
	fonts and whether US or A4 paper for GDB refcard; (refcard.dvi)
	collect sed edits if any, apply to refcard before formatting;
	(refcard.ps) stop implying PS fonts if PS output requested;
	(lrefcard.ps) delete extra target for variant PS fonts

	* refcard.tex: parametrize papersize dependent info, collect
	  in easily replaced spot

	* a4rc.sed: new file, edits to refcard for A4 paper

Fri Jun 25 14:21:46 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Negative Type Numbers): Type -16 is 4 bytes.

Wed Jun 23 15:02:50 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Negative Type Numbers): Minor character cleanups.

Tue Jun 22 16:31:52 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo: Express disapproval of 'D' symbol descriptor
	politely rather than rudely.

Fri Jun 18 19:42:09 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo: Document common blocks.

Fri Jun 18 12:12:57 1993  Fred Fish  ([email protected])

	* stabs.texinfo:  Add some basic info about stabs-in-elf.

Fri Jun 18 13:57:09 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Top): Minor cleanup.

Mon Jun 14 16:16:51 1993  david d `zoo' zuhn  (zoo at rtl.cygnus.com)

	* Makefile.in (install-info): remove parentdir support

Tue Jun 15 18:11:39 1993  Roland H. Pesch  ([email protected])

	* gdb.texinfo (Copying): delete this node and references to it;
	RMS says this manual need not carry GPL. (passim): Improvements
	from last round at FSF, largely due to Ian Taylor review, and
	minor formatting improvements.

	* gdbinv-s.texi (passim): Improvements from last round at FSF,
	largely due to Ian Taylor review. (Debug Session): minor edits to
	new text.

Sun Jun 13 12:52:39 1993  Jim Kingdon  ([email protected])

	* Makefile.in (realclean): Remove info and dvi files too.

Sat Jun 12 16:09:22 1993  Jim Kingdon  ([email protected])

	* {all,h8}-config.texi: Rename to *-cfg.texi for 14 char filenames.
	* Makefile.in: Change accordingly.  gdb-config.texi -> gdb-cfg.texi.
	* gdb.texinfo: Change accordingly.

	* stabs.texinfo: Clean up N_{L,R}BRAC.  Discuss what addresses of
	N_{L,R}BRAC,N_SLINE are relative to.

Fri Jun 11 15:15:55 1993  Jim Kingdon  ([email protected])

	* Makefile.in (GDBvn.texi): Update atomically.

Wed Jun  9 10:58:16 1993  Jim Kingdon  ([email protected])

	* gdbinv-s.texi (Debug Session): Document exceptionHook.

Tue Jun  8 13:42:04 1993  Jim Kingdon  ([email protected])

	* gdb.texinfo (Print Settings): Move all stuff relating to symbolic
	addresses together.  Also motivate the set print symbol-filename
	command and suggest other solutions.

Tue Jun  1 22:46:43 1993  Fred Fish  ([email protected])

	* gdb.texinfo (set print elements):  Note that the number of
	elements is set to unlimited by "set print elements 0".

Mon May 31 08:06:55 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Builtin Type Descriptors): Try to clarify what
	NF_LDOUBLE means.
	(Stab Types): Include Solaris stab types.
	(Procedures): Document Solaris extensions.

Thu May 27 06:20:42 1993  Peter Schauer  ([email protected])

	* gdb.texinfo:  Add `set print symbol-filename' doc.

Wed May 26 00:26:42 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Arrays): Talk about type definition vs. type
	information.

	* stabs.texinfo (Builtin Type Descriptors): Talk about omitting
	the trailing semicolon.

Tue May 25 14:49:42 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Line Numbers, Source Files): Re-write these two nodes
	and merge in other parts of the document addressing these subjects.
	gdbint.texinfo (XCOFF): Remove info which is now in stabs.texinfo.

	* stabs.texinfo (Subranges, Arrays): Try to explain about the semicolon
	at the end of a range type.

	* stabs.texinfo (Subranges): "A offset" and "T offset" are not
	AIX extensions.

Mon May 24 09:00:33 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Stabs Format):  Misc fixes.

Sat May 22 10:40:56 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Constants):  Allow an `e' constant to be non-enum.
	(Traditional builtin types): Document convex convention for long long.
	(Negative builtin types): Discuss type names, and misc fixes.

Fri May 21 11:20:31 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Builtin Type Descriptors): Document the floating
	point types used with @samp{R} type descriptor.
	(Symbol Descriptors): Describe how to handle conflict between
	different meanings of @samp{P} symbol descriptor.

Thu May 20 13:35:10 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo: Remove node Quick Reference and put its children
	directly under the main menu.

	* stabs.texinfo: Many more changes to bring it into line with
	AIX documentation and reality.  I think it now has all the
	information from the AIX documentation, except that I burned
	out when I got to variant records (Pascal and Modula-2) and
	all the COBOL types.  Oh well, we can add them later when we're
	worrying more about those languages.

	* stabs.texinfo (Automatic variables): Talk about what it means
	to omit the symbol descriptor.

Tue May 18 17:59:18 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Parameters): Add "(sometimes)" when describing
	gcc2 behavior with promoted args.

Fri May 14 21:35:29 1993  Roland H. Pesch  ([email protected])

	* gdb.texinfo: include readline appendices in info version of manual

Fri May  7 11:56:18 1993  Roland H. Pesch  ([email protected])

	* gdbinv-s.texi (Remote Serial): describe new ^C behavior in
	target remote.

	* gdb.texinfo (Machine Code): more index entries for disassemble

Fri May  7 10:12:30 1993  Fred Fish  ([email protected])

	* Clarify the intended use of the gdb-testers and gdb-patches
	mailing lists, and shrink gzip comment.

Thu May  6 16:39:50 1993  Roland H. Pesch  ([email protected])

	* gdb.texinfo (Shell Commands): do not mention SHELL env var in
	DOSHOST configuration of manual.

	* gdb.texinfo (MIPS Stack): new node.

	* all-config.texi (MIPS) new switch.

	* gdbinv-s.texi (Nindy Options) Remove two instances of future
	tense; (MIPS Remote) new node.

	* gdb.texinfo (passim) rephrases to work around makeinfo @value
	bug; (Environment) less passive, other small cleanups in text about
	.cshrc/.bashrc; (Invoking GDB) new MIPS Remote menu entry;
	(Remote) new MIPS Remote menu entry.

Thu Apr 29 09:36:25 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo: Many changes to include information from the
	AIX documentation.

	* gdb.texinfo (Environment): Mention pitfall with .cshrc.

Tue Apr 27 14:02:57 1993  Jim Kingdon  ([email protected])

	* gdbint.texinfo (new node Debugging GDB, elsewhere):
	Move a bunch of information from ../README.
	(Getting Started): New node.

Fri Apr 23 17:21:13 1993  Roland H. Pesch  ([email protected])

	* gdbinv-s.texi, gdb.texinfo: include Hitachi SH target

	* gdb.texinfo: advance manual revision dates to present

	* gdbinv-s.texi, gdb.texinfo, all-config.texi, h8-config.texi:
	stop using silly Roman numerals in @set variable names

Fri Apr 23 07:30:01 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Parameters): Keep trying to get this right.

Wed Apr 21 15:18:47 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Parameters): More on "local parameters".

Mon Apr 19 08:00:51 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Parameters): Re-do "local parameters" section.

Sun Apr 18 09:47:45 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Symbol descriptors): Re-do using @table and @xref.
	(Parameters): Rewrite.
	(xcoff-differences, Sun-differences): Minor changes.

Thu Apr 15 02:35:24 1993  John Gilmore  ([email protected])

	* stabs.texinfo:  Minor cleanup.

Wed Apr 14 17:31:00 1993  Jim Kingdon  ([email protected])

	* gdbint.texinfo: Minor xcoff stuff.

Wed Apr  7 14:11:07 1993  Fred Fish  ([email protected])

	* gdbint.texinfo:  Update for new config directory structure.
	Add info about internal type data structures.

Mon Apr  5 09:06:30 1993  Ian Lance Taylor  ([email protected])

	* Makefile.in (SFILES_INCLUDED): gdb-config.texi is no longer in
	$(srcdir).
	(gdb-config.texi): Depend on file in $(srcdir).

Fri Apr  2 16:55:13 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo: Fixes about N_SO.

Fri Mar 26 18:00:35 1993  Roland H. Pesch  ([email protected])

	* gdb.texinfo: include list of nonstandard init file names

	* *-config.texi: new switch GENERIC for text that applies *only*
	to (usual) multiple-target version of manual

	* gdb.texinfo, gdbinv-s.texi: Update conditional markup to correct
	h8 config

	* gdb.texinfo: depend on latest fixed makeinfo, use conditionals
	in menus (rather than conditionally selected multiple alternative
	menus).

	* Makefile.in: define and use DOC_CONFIG var to select
	configuration for GDB user manual.

	* gdb-config.texi: delete from repository, generate from Makefile.

	* all-config.texi: normal `generic' configuration file, formerly
	stored as gdb-config.texi

Wed Mar 24 14:03:19 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)

	* Makefile.in: add dvi target to build all .dvi files

Tue Mar 23 16:03:24 1993  Roland H. Pesch  ([email protected])

	* gdb.texinfo, gdvinv-s.texinfo: formatting improvements.

Fri Mar 19 21:46:50 1993  John Gilmore  ([email protected])

	* gdbint.texinfo:  Doc NO_MMALLOC and NO_MMALLOC_CHECK as
	host conditionals.
	* stabs.texinfo:  More array fixes inspired by Jim's.

Fri Mar 19 10:23:34 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo: Fixes re arrays and continuations.

	* gdbint.texinfo: Add XCOFF node.

Mon Mar  8 15:52:18 1993  John Gilmore  ([email protected])

	* gdb.texinfo:  Add `set print max-symbolic-offset' doc.

Sun Feb 21 17:09:38 1993  Per Bothner  ([email protected])

	* stabs.texinfo:  Fix for array types to mention lower bounds.

Thu Feb 18 01:19:49 1993  John Gilmore  ([email protected])

	* gdbint.texinfo:  Update PTRACE_ARG3_TYPE doc, pull PT_*.

Wed Feb 17 08:15:24 1993  John Gilmore  ([email protected])

	* gdbint.texinfo:  Remove SET_STACK_LIMIT_HUGE from target defines.

Thu Feb 11 10:38:40 1993  John Gilmore  ([email protected])

	* gdbint.texinfo:  Fix thinko (NM_FILE => NAT_FILE).  Found
	by Michael Ben-Gershon <[email protected]>.

Wed Feb 10 23:59:19 1993  John Gilmore  ([email protected])

	* gdbint.texinfo:  Eliminate IBM6000_HOST, document IBM6000_TARGET.

Tue Feb  9 18:26:21 1993  Roland H. Pesch  ([email protected])

	* gdb.texinfo, gdbinv-s.texi: misc updates

Sat Feb  6 10:25:47 1993  John Gilmore  ([email protected])

	* gdbint.texinfo:  Brief documentation for longjmp support,
	from an email msg by Stu.

Fri Feb  5 14:10:15 1993  John Gilmore  ([email protected])

	* stabs.texinfo:  Fix description of floating point "range"
	types (which really define basic types).  Reported by Jim Meehan,
	<[email protected]>.

	* gdbint.texinfo:  Remove COFF_NO_LONG_FILE_NAMES define, now gone.

Thu Feb  4 13:56:46 1993  Ian Lance Taylor  ([email protected])

	* gdbint.texinfo: Slightly expand section on supporting a new
	object file format.

Thu Feb  4 01:49:04 1993  John Gilmore  ([email protected])

	* Makefile.in (refcard.ps, lrefcard.ps):  Remove psref.tex
	intermediate file.

Tue Feb  2 12:18:06 1993  Roland H. Pesch  ([email protected])

	* gdb.texinfo, gdbinv-s.texi: miscellaneous stylistic cleanups

Mon Feb  1 15:35:47 1993  Roland H. Pesch  ([email protected])

	* gdbinv-s.texi: z8000 simulator target name is just "sim"

	* gdbinv-s.texi:  Mention that Z8000 simulator can simulate Z8001
	as well as Z8002.

Sat Nov 28 06:51:35 1992  John Gilmore  ([email protected])

	* gdbint.texinfo:  Add sections on clean design and on how to send
	in changes.

Mon Nov  9 23:57:02 1992  John Gilmore  ([email protected])

	* gdbint.texinfo:  Add how to declare the result of make_cleanup.

Mon Oct 26 11:09:47 1992  John Gilmore  ([email protected])

	* gdb.texinfo:  Fix typo, reported by Karl Berry.

Fri Oct 23 00:41:21 1992  John Gilmore  ([email protected])

	* gdb.texinfo:  Add opcodes dir to GDB distribution description.

Sat Oct 10 18:04:58 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

	* gdbint.texinfo: fixed a stray email address (needs @@),
	added @table @code to node "Native Conditionals"

Tue Sep 22 00:34:15 1992  John Gilmore  ([email protected])

	* gdbint.texinfo:  Describe coding style of GDB.

Mon Sep 21 19:32:16 1992  John Gilmore  ([email protected])

	* stabs.texinfo:  Minor wording changes.

Tue Sep 15 02:57:09 1992  John Gilmore  ([email protected])

	* gdbint.texinfo:  Improve release doc slightly.

Fri Sep 11 01:34:25 1992  John Gilmore  ([email protected])

	* gdbint.texinfo:  Improve doc of GDB config macros.

Wed Sep  9 16:52:06 1992  John Gilmore  ([email protected])

	* stabs.texinfo:  Remove Bothner's changes for C++ nested types.
	These will be reinserted when examined.

Mon Aug 24 01:17:55 1992  John Gilmore  ([email protected])

	* gdbint.texinfo:  Make a start at documenting all the #if macros
	in GDB.  At least list them all, and start separating them into
	host-specific and target-specific.

Tue Aug 18 15:59:13 1992  Roland H. Pesch  ([email protected])

	* gdbinv-s.m4.in: refrain from using @cartouche for just a few
	examples (not consistent w others).
	gdb.texinfo: issue disclaimer paragraph on cmdline options only
	for generic vn of doc

Tue Aug 18 14:53:27 1992  Ian Lance Taylor  ([email protected])

	* Makefile.in: always create installation directories.

Tue Aug 18 14:11:50 1992  Roland H. Pesch  ([email protected])

	* gdb.texinfo: in h8 config, do not describe searching commands.

Mon Aug 17 18:07:59 1992  Roland H. Pesch  ([email protected])

	* gdb.texinfo, none.m4, h8.m4, gdbinv-s.m4.in: improve H8/300
	  conditionals; introduce a few generic switches that may be
	  useful for other cross-dev or dos-hosted configs.

	* gdb.texinfo: fix typo in "info reg" description

Sun Aug 16 01:16:18 1992  John Gilmore  ([email protected])

	* stabs.texinfo:  Minor updates from running TeX over it.
	* Makefile.in (stabs.dvi, stabs.ps):  Add.

Sat Aug 15 20:52:24 1992  Per Bothner  ([email protected])

	* stabs.texinfo:  Stabs documentation, written by Julia Menapace.
	First pass at converting it to texinfo.

Sat Aug 15 03:14:59 1992  John Gilmore  ([email protected])

	* gdb.texinfo, refcard.tex:  Document mult args on `info reg'.
	* Makefile.in (refcard.ps, lrefcard.ps):  Add missing $(srdir).

Fri Aug 14 21:08:47 1992  John Gilmore  ([email protected])

	* gdbint.texinfo:  Add section on partial symbol tables.

Sat Jun 20 16:31:10 1992  John Gilmore  (gnu at cygnus.com)

	* gdb.texinfo:  document `set remotedebug' and `set
	rstack_high_address'.

Thu May 14 17:09:48 1992  Roland H. Pesch  ([email protected])

	* gdb.texinfo: slight expansion of new text on reading info files
	* gdbinv-s.m4.in: correct and expand info on cross-debugging
	H8/300 from DOS.

Tue May 12 12:22:47 1992  John Gilmore  (gnu at cygnus.com)

	* gdb.texinfo:  `info user' => `show user'.  Noticed by David Taylor.

Mon May 11 19:06:27 1992  John Gilmore  (gnu at cygnus.com)

	* gdb.texinfo:  Say how to read the `info' files.

Tue May  5 12:11:38 1992  K. Richard Pixley  ([email protected])

	* Makefile.in: gm4 -> m4.

Fri Apr 10 17:50:43 1992  John Gilmore  (gnu at rtl.cygnus.com)

	* gdb.texinfo:  Update for GDB-4.5.  Move `Formatting
	Documentation' ahead of `Installing GDB' to match README.
	Update shared library doc, -readnow and -mapped, and directory
	structure (add glob and mmalloc).  Update configure doc.

Tue Mar 24 23:28:38 1992  K. Richard Pixley  ([email protected])

	* Makefile.in: remove $(srcdir) from gdb.info rule.

Sat Mar  7 18:44:50 1992  K. Richard Pixley  ([email protected])

	* Makefile.in: commented out gdb-all.texinfo rule.  This is
	  temporary.

Wed Feb 26 18:04:40 1992  K. Richard Pixley  ([email protected])

	* Makefile.in, configure.in: removed traces of namesubdir,
	  -subdirs, $(subdir), $(unsubdir), some rcs triggers.  Forced
	  copyrights to '92, changed some from Cygnus to FSF.

Fri Dec 13 09:47:31 1991  John Gilmore  (gnu at cygnus.com)

	* gdb.texinfo:  Improve how we ask for bug reports.

Tue Dec 10 04:07:21 1991  K. Richard Pixley  (rich at rtl.cygnus.com)

	* Makefile.in: infodir belongs in datadir.

Fri Dec  6 23:57:34 1991  K. Richard Pixley  (rich at rtl.cygnus.com)

	* Makefile.in: remove spaces following hyphens, bsd make can't
	  cope.  install using INSTALL_DATA.  added clean-info.  added
	  standards.text support.

Thu Dec  5 22:46:12 1991  K. Richard Pixley  (rich at rtl.cygnus.com)

	* Makefile.in: idestdir and ddestdir go away.  Added copyrights
	  and shift gpl to v2.  Added ChangeLog if it didn't exist. docdir
	  and mandir now keyed off datadir by default.

\f
Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
End: