Replace:

[binutils.git] / gdb / doc / ChangeLog

2001-06-15  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): GDBARCH is a C
	structure and not macros.
	(Host Definition): Document that much of this chapter is obsolete.
	(Target Architecture Definition): Update list of files that make
	up a target architecture.
	(Coding): Update.

2001-06-28  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Update
	EXTRACT_STRUCT_VALUE_ADDRESS and EXTRACT_STRUCT_VALUE_ADDRESS_P.
	The latter has been changed to a true predicate.

2001-06-17  Eli Zaretskii  <[email protected]>

	* annotate.texi: Add @noindent where needed.  From Dmitry
	Sivachenko <[email protected]>.
	* gdb.texinfo: Indexing fix.  From Dmitry Sivachenko.

2001-06-16  Andrew Cagney  <[email protected]>

	* gdb.texinfo (Protocol): Fix typo.  Extra parenthesis.

2001-06-14  Andrew Cagney  <[email protected]>

	* gdb.texinfo (Remote Protocol): Document that the ``!'' packet
	returns ``OK''.  Document that the ``R'' packet does not reply.

2001-06-13  Michael Snyder  <[email protected]>

	* gdb.texinfo (Protocol): Add doc for new packet "qSymbol:".

2001-06-13  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Signals): Clarify the default setting of signal
	handling.

2001-05-14  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (CLEAR_DEFERRED_STORES): Delete stray @item
	(FRAME_ARGS_ADDRESS_CORRECT): Ditto.

2001-05-12  Andrew Cagney  <[email protected]>

	* Makefile.in (GDBvn.texi): Set GDBVN from ../version.in.

2001-05-10  Eli Zaretskii  <[email protected]>

	* gdbint.texinfo (Clean Design and Portable Implementation):
	Renamed from "Clean Design".
	(Clean Design and Portable Implementation): Document portable
	methods of handling file names, and the associated macros.

2001-04-02  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Tracepoint Actions): Mention the "info scope"
	command and provide a cross-reference to its description.
	(Symbols): Note that "info scope" is useful for trace experiments.

2001-04-01  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Symbols): Document "info scope".
	(Tracepoints): New chapter.
	(Contributors): Update for v5.1.
	<All nodes>: Change "C++" to "C@t{++}".

	* gdbint.texinfo (User Interface): A new section about ui_out
	functions, based on text written by Fernando Nasser.

	* stabs.texinfo: Change Permissions to GFDL.  Update Copyright.

2001-03-26  Eli Zaretskii  <[email protected]>

	* gdb.texinfo: Change Permissions to GFDL.  Update Copyright.

	* gdbint.texinfo: Change Permissions to GFDL.  Update Copyright.

	* gdbgui.texinfo: Change Permissions to GFDL.  Update Copyright.
	Replace "GDB" with "@value{GDBN}".  Fix markup.

	* annotate.texi: Change Permissions to GFDL.  Update Copyright.

	* gdb.texinfo (Output Formats): Mention "info symbol" and provide
	a cross-reference to its description.
	(Symbols): Document "info symbol".

2001-03-21  Eli Zaretskii  <[email protected]>

	* gdbint.texinfo (Algorithms): New section "Watchpoints" and new
	subsection "x86 Watchpoints".
	(Target Architecture Definition): Document the macros
	I386_USE_GENERIC_WATCHPOINTS and TARGET_HAS_HARDWARE_WATCHPOINTS.
	(Native Debugging): Document I386_USE_GENERIC_WATCHPOINTS.

2001-03-20  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Update
	definition of SOFTWARE_SINGLE_STEP_P to include empty parameter
	list.

2001-03-06  Kevin Buettner  <[email protected]>

	* Makefile.in, all-cfg.texi, annotate.texi, gdb.texinfo,
	gdbint.texinfo, refcard.tex: Update/correct copyright notices.

2001-02-21  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Signals): Document "ignore", "noignore", and "all".

2001-02-11  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Environment): Document that `path' does not change
	the value of PATH in GDB's own environment (it did in the past,
	but that was changed on March 15, 1994).  Reported by Doug Evans
	<[email protected]>.

	* gdbint.texinfo: Fix up @itemize lists so that @item is alone on
	its line.  Fix markup of commands and macros.  Add an Index node
	and index entries.

2001-01-23  J.T. Conklin  <[email protected]>

	* gdb.texinfo (Memory region attributes): New manual section.

2001-01-04  Nicholas Duffek  <[email protected]>

	* gdbint.texinfo (POP_FRAME): Document use by return_command.

2000-12-25  Eli Zaretskii  <[email protected]>

	* refcard.tex: Version and copyright fixed.  From Phil Edwards
	<[email protected]>.

Thu Nov 30 16:57:19 2000  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (ECOFF_REG_TO_REGNUM, DWARF_REG_TO_REGNUM,
 	DWARF2_REG_TO_REGNUM): Document.

Mon Nov 20 21:29:35 2000  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Coding): Update current value of
 	--enable-build-warnings.  Mention --enable-gdb-build-warnings.

2000-11-19  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Continuing and Stepping):  Fixed markup and typos,
	as suggested by Dmitry Sivachenko <[email protected]>.

2000-11-10  Christopher Faylor <[email protected]>

	* gdb.texinfo: Document new 'set step-mode' command.

2000-10-16  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Contributors, MIPS Embedded): Minor spelling
	changes from Dmitry Sivachenko <[email protected]>.

2000-09-26  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Hooks): Document the new post-hook functionality.
	From Steven Johnson <[email protected]>.

2000-08-10  Mark Kettenis  <[email protected]>

	* gdbint.texinfo (Overall Structure): Spelling fix.

2000-08-10  Eli Zaretskii  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Document that
	REGISTER_CONVERT_TO_VIRTUAL should only be called on a register
	for which REGISTER_CONVERTIBLE returns a zero value.

2000-07-08  Christopher Faylor <[email protected]>

	* Makefile.in (install-info): Find files to install in either the
	build or source directories (adapted from Makefile.am).

2000-07-07  Nicholas Duffek  <[email protected]>

	* stabs.texinfo: Fix spelling errors.
	(String Field): FILE-NUMBER starts from 0, not 1.

2000-07-05  Eli Zaretskii <[email protected]>

	* refcard.tex: Remove \centerline from the blurb.  Patch from
        Brian Youmans.

2000-06-25  Eli Zaretskii <[email protected]>

	* Makefile.in (install-info): Support installation from outside of
        the source directory.  Reported by Mark Harig
        <[email protected]>.

2000-06-20  J.T. Conklin  <[email protected]>

	* gdb.texinfo: Fix typo, $bpnum is set to last breakpoint number.

Fri May 26 15:55:33 2000  Andrew Cagney  <[email protected]>

	* Makefile.in (pdf, gdbint.pdf, gdb.pdf, stabs.pdf): New targets.
  	Generate using pdftex.
	(PDFTEX): Define.
 	(STAGESTUFF, maintainer-clean realclean): Add *.pdf.
	(gdb.texinfo, gdbint.texinfo, stabs.texinfo): When TeX insert the
 	@contents at the start.

2000-05-24  Eli Zaretskii  <[email protected]>

	* gdb.texinfo: Remove duplicate @syncodeindex.  From Brian
        Youmans.

Wed May 24 21:27:58 2000  Andrew Cagney  <[email protected]>

	From Brian Youmans:
	* gdb.texinfo: Fix ``et al.''.

Tue May 23 22:57:41 2000  Andrew Cagney  <[email protected]>

	* Makefile.in (refcard.dvi): Remove quotes around REFEDITS in for
 	loop.

2000-05-19  Jimmy Guo  <[email protected]>

	* configure: Regenerate.

2000-05-17  Eli Zaretskii  <[email protected]>

	* Makefile.in (install-info): Run install-info on installed Info
	files.

Fri May 12 20:18:04 2000  Andrew Cagney  <[email protected]>

	* gdb.texinfo: Add Stan Shebs, et.al. as authors.  Mention
 	Andrew Cagney.

2000-05-09  Eli Zaretskii  <[email protected]>

	* gdb.texinfo: Proofreading changes from Brian Youmans.

2000-05-01  Nick Duffek  <[email protected]>

	* gdb.texinfo (Command Files): Mention -x, use @enumerate for
	startup sequence, minor edits.

2000-05-01  Eli Zaretskii  <[email protected]>

	* annotate.texi: Remove "@syncodeindex fn cp", it causes grief in
	TeX.

	* gdb.texinfo: Add "@syncodeindex fn cp".  Convert all entries
	"@kindex f" into "@kindex f (foo)", otherwise we get index entries
	like `n' and `s' which look weird.  Convert some of the @kindex to
	@vindex, when they refer to variables, not commands.

Sat Apr 29 17:01:04 2000  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Hints): Do not use @value{GDBN in @nodes.

2000-04-23  Eli Zaretskii  <[email protected]>

	* Makefile.in (GDBMI_DIR): New variable.
	(SET_TEXINPUTS): Add $(GDBMI_DIR).
	(SFILES_DOC): Add $(GDBMI_DIR)/gdbmi.texinfo.
	(gdbmi.texinfo): New target, for texi2roff.
	(gdb.me, gdb.ms, gdb.mm): Depend on gdbmi.texinfo.
	(gdb.info, gdb_toc.html): Add "-I ${GDBMI_DIR}".

	* gdb.texinfo (Top): Add GDB/MI to the main menu and @include
	gdbmi.texinfo.
	(Mode Options): Add xref to GDB/MI docs and remove a FIXME
	comment.

2000-04-17  Elena Zannoni  <[email protected]>

	* gdb.texinfo (Files): Update description of add-symbol-file
 	command.

2000-04-17  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Porting GDB): Don't use @value in the node name, it
	prevents the build (and is generally a Bad Idea).

2000-04-17  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Protocol): Prevent makeinfo from complaining about
	a comma inside @var.
	(Command Files): Index markup changes from Dmitry Sivachenko
	<[email protected]>.

2000-04-16  Eli Zaretskii  <[email protected]>

	* Makefile.in (LN_S): Define.
	(gdb-cfg.texi, gdb.dvi, links2roff, inc-hist.texinfo): Don't
	invoke "ln -s" unless it is known to work.

	* configure.in (AC_PROG_LN_S): Add.

2000-04-14  Jim Blandy  <[email protected]>

	* gdbint.texinfo (Pointers Are Not Always Addresses): New manual
	section.
	(Target Conditionals): Document ADDRESS_TO_POINTER,
	POINTER_TO_ADDRESS.

2000-04-11  Daniel Berlin  <[email protected]>

	* gdbint.texinfo: Replaced GDB with @value{GDBN}, @include
	gdb-cfg.texi to get the value.

2000-04-10  Jim Blandy  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Fix
	cross-references.

2000-04-08  Jim Blandy  <[email protected]>

	* gdbint.texinfo (Using Different Register and Memory Data
	Representations): New section.
	(REGISTER_CONVERTIBLE, REGISTER_RAW_SIZE, REGISTER_VIRTUAL_SIZE,
 	REGISTER_VIRTUAL_TYPE, REGISTER_CONVERT_TO_VIRTUAL,
 	REGISTER_CONVERT_TO_RAW): Document.

Mon Apr  3 19:16:32 2000  Andrew Cagney  <[email protected]>

	* gdb.texinfo (Protocol): Deprecate the sequence-id.  Add cindex
 	for acknowledgments.

Tue Mar 28 18:28:45 2000  Andrew Cagney  <[email protected]>

	* gdb.texinfo (Protocol): Replace ``qfThreadExtraInfo'' with
 	qThreadExtraInfo.

2000-03-28  J.T. Conklin  <[email protected]> 

	* gdb.texinfo: Clarify which remote debug protocol commands are 
	required and which are optional. 

Tue Mar 28 16:06:22 2000  Andrew Cagney  <[email protected]>

	* gdb.texinfo: Revert remainder of Fri Mar 24 18:06:34 2000 Andrew
 	Cagney <[email protected]>.  Move @chapter and @node entries
 	back to annotate.texi, rluser.texinfo and inc-hist.texinfo.
	* annotate.texi: Update.

2000-03-28  Stan Shebs  <[email protected]>

	* gdb.texinfo: Update dates, bump to Eighth Edition (note
	expectation of additional changes before release), update
	ISBN, add copy of top-level menu for @ifhtml, remove explicit
	node links, rephrase and/or shorten lines to fix formatting
	problem in both regular and @smallbook formats.
	* annotate.texi: Shorten lines in example, use smallexample
	consistently everywhere.
	* Makefile.in: Add comment about texinfo 4.0 html generation.
	(SFILES_INCLUDED): Add annotate.texi.

2000-03-27  Daniel Berlin  <[email protected]>

        * gdb.texinfo (Debugging Output): Added new section, documenting
        the "set/show debug" commands.

Fri Mar 24 18:06:34 2000  Andrew Cagney  <[email protected]>

	* annotate.texi (Annotations): When GDBN omit @chapter and @node
 	entry.

	* gdb.texinfo: Check for @ifinfo instead of @ifnottex.
	(rluser.texinfo, inc-hist.texinfo, annotate.texi): Add local
 	@chapter and @node entries.
	
	* gdb.texinfo: Link all top-level nodes.
	
Fri Mar 24 17:56:48 2000  Andrew Cagney  <[email protected]>

	* Makefile.in (install-info): Create $(infodir) before installing
 	files.

2000-03-23  Fernando Nasser  <[email protected]>

	From David Whedon <[email protected]>
        * gdbint.texinfo : Added paragraphs about command deprecation.

2000-03-22  Daniel Berlin  <[email protected]>

      * gdb.texinfo: Add documentation for the apropos command.

2000-03-20  Michael Snyder  <[email protected]>

	* gdb.texinfo: Add new queries ThreadInfo and ThreadExtraInfo.

2000-03-20  Michael Snyder  <[email protected]>

	* gdb.texinfo: Add white space to prevent overprinting in 
	two places.

2000-03-17  Stan Shebs  <[email protected]>

	* gdb.texinfo: Many minor changes from Dmitry Sivachenko
	<[email protected]>, also clarification of allowed content for
	string constants.

2000-03-16  Eli Zaretskii <[email protected]>

	* gdb.texinfo (main menu): Add Annotations.
	(File Options): Add @cindex entries for each command-line option.
	Document --epoch, --annotate, --async, --interpreter, --write,
	--statistics, and --version.

	* annotate.texi: Convert to a chapter.  Use @value{GDBN} instead
	of GDB.

2000-02-23  Jim Blandy  <[email protected]>

	* gdbint.texinfo (FUNCTION_START_OFFSET): Document.

2000-02-22  Jim Blandy  <[email protected]>

	* gdbint.texinfo: Document COERCE_FLOAT_TO_DOUBLE --- the new form.

2000-02-15  Jason Molenda  ([email protected])

	* Makefile.in (diststuff): New target.

2000-02-15  Kevin Buettner  <[email protected]>

	* agentexpr.texi: Fix wording regarding Intel's IA-64
	architecture.  [From Jim Wilson.]

2000-01-16  Tom Tromey  <[email protected]>

	* gdb.texinfo (Breakpoints): Mention breakpoint ranges.
	(Delete Breaks): Mention range arguments.
	(Disabling): Likewise.

2000-01-05  Dmitry Sivachenko <[email protected]>

	* gdb.texinfo:  Wrap "ASCII" in @sc{}; clarify a few sentences.

Wed Dec  8 19:53:08 1999  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (FRAME_CHAIN_VALID): Add the generic frame-chain
 	valid functions.

1999-11-05  Stan Shebs  <[email protected]>

	* gdb.texinfo: Clarify regular expressions used in rbreak.

1999-10-15  Kevin Buettner  <[email protected]>

	* gdbint.texinfo (MEMORY_INSERT_BREAKPOINT,
	MEMORY_REMOVE_BREAKPOINT):  Document.

Thu Oct 14 21:17:17 1999  Andrew Cagney  <[email protected]>

	* gdb.texinfo (remote): Document how GDB ignores the qOffsets BSS
 	offset re-using the DATA offset instead.

1999-10-11  Jim Kingdon  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Add PARM_BOUNDARY.

1999-10-05  Stan Shebs  <[email protected]>

	From Dmitry Sivachenko <[email protected]>:
	* gdb.texinfo: Use GDBP and GDBN everywhere, fix a couple other
	typos.

	* gdb.texinfo: Various minor wording and formatting improvements,
	mentions of additional command-line options.

1999-09-30  Fred Fish  <[email protected]>

	* gdb.texinfo:  Document additional forms of specifying section
	names and addresses for the add-symbol-file command.

1999-09-14  Michael Snyder  <[email protected]>

	* gdbint.texinfo: Fix typo, add the word "have".

1999-09-14  Jim Blandy  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Document the
	SKIP_PERMANENT_BREAKPOINT macro.

1999-09-07  Stan Shebs  <[email protected]>

	* gdb.texinfo: Fiks speling errers.

	* gdb.texinfo: Fix uses of @multitable.

	From Eli Zaretskii  <[email protected]>:
	* gdb.texinfo: Include details specific to DOS host, clarify
 	some confusing language, fix @ref/@xref/@pxref usages, add
	comments about using with optimization, add more indexing,
	fix info about disassembly-flavor.

Tue Sep  7 09:11:24 1999  Kevin Buettner  <[email protected]>

	* gdbint.texinfo (IN_SOLIB_DYNSYM_RESOLVE_CODE,
	SKIP_SOLIB_RESOLVER): Define.

Fri Sep  3 18:05:14 1999  Andrew Cagney  <[email protected]>

	* gdb.texinfo (Protocol): Review.  Add tables describing ``q'' and
 	``g'' packets.

1999-08-30  Stan Shebs  <[email protected]>

	* gdb.texinfo: Create a new "Configurations" chapter with
 	platform-specific info, inline remote.texi and move sections of it
 	into the new chapter, move bits about info proc, heuristic search,
	and register stack into the new chapter.
	* remote.texi: Remove, now part of gdb.texinfo.
	* Makefile.in (SFILES_INCLUDED): Remove ref to remote.texi.

1999-08-27  Jason Molenda  ([email protected])

	* gdbint.texinfo (GDB_TARGET_IS_SUN3, GDB_TARGET_IS_SUN386,
	GDB_TARGET_IS_MACH386): These kludges have gone away.

Wed Aug 25 10:47:03 1999  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Target Architecture Definition): Mention
 	TDEPLIBS.

1999-08-20  Stan Shebs  <[email protected]>

	* gdb.texinfo: Remove remaining "HPPA" conditionals, rewrite
	surrounding text to fit HP-UX bits into general info.
	(HPPA-cfg.texi): Remove, no longer useful.

	* gdb.texinfo: Remove explicit links from @node lines, remove
	HP-added "Detailed Node Listing" from main menu which confuses
	things.

	From Dmitry Sivachenko <[email protected]>:
	* gdb.texinfo: Use @value{GDBN} instead of plain GDB, fix grouping
 	in description of `set environment'.

1999-08-17  Stan Shebs  <[email protected]>

	* gdbint.texinfo: Update coding standard to allow pure ANSI/ISO C.

1999-08-12  Ben Elliston  <[email protected]>

	* gdbint.texinfo (Breakpoint Handling): Add missing words.

1999-08-10  Eli Zaretskii  <[email protected]>

	* gdb.texinfo (Set Watchpoints): Explain some subtleties about
 	watch, awatch, and rwatch.  Explain why the latter two cannot be
 	set as software watchpoints.  Document that watchpoints for local
 	variables are deleted when the debuggee terminates.

Wed Aug 11 13:18:14 1999  Andrew Cagney  <[email protected]>

	* remote.texi (Protocol): Further clarification of the "qRcmd"
 	packet.  Allow E.. response packet.  "qRcmd" packet is no longer
 	reserved.

1999-08-10  Elena Zannoni  <[email protected]>

	* Makefile.in: Rename inc-hist.texi to inc-hist.texinfo. 
	* gdb.texinfo: Ditto. 

1999-08-06  Tom Tromey  <[email protected]>

	* gdb.texinfo (KOD): New node.

Fri Aug  6 17:05:48 1999  Andrew Cagney  <[email protected]>

	* remote.texi (Rcmd): Fix minor formatting typos.

Thu Aug  5 17:57:41 1999  Andrew Cagney  <[email protected]>

	* remote.texi (protocol qRcmd): Allow ``OK'' and ``O...'' response
 	packets.

1999-07-14  Jim Blandy  <[email protected]>

	* gdbint.texinfo (PREPARE_TO_PROCEED, ADDR_BITS_REMOVE): Doc
	fixes.

Tue Jun 29 11:43:55 1999  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (SAVE_DUMMY_FRAME_TOS): Define.

Fri Jun 25 11:47:06 1999  Andrew Cagney  <[email protected]>

	* remote.texi (Communication Protocol): ``v'' is in use. Fix
 	numerous formatting errors.  Clarify ``i''.  Mark ``i'', ``Z'',
 	``z'' and ``qRcmd'' as draft instead of reserved.  Identify
 	packets that are not supported on all hosts. Expand examples.
  	Spell check.

1999-06-24  Jason Molenda  ([email protected])

	* Makefile.in: Recognize html, install-html.  Add targets
	to build HTML versions of documentation via texi2html.

Thu Jun 24 15:59:03 1999  Stan Shebs  <[email protected]>

	* gdbint.texinfo (Testsuite): New chapter, information about the
 	testsuite.

Fri Jun 25 02:40:34 1999  Andrew Cagney  <[email protected]>

	* remote.texi (Communication Protocol): Rewrite.

Thu Jun 24 16:59:54 1999  Andrew Cagney  <[email protected]>

	* stabs.texinfo: Fix uses of xref.

Thu Jun 17 17:23:25 1999  Stan Shebs  <[email protected]>

	* gdbint.texinfo: Add an anti-printf exhortation, and update the
	info about patch submission.

Mon Jun  7 15:49:40 1999  Stan Shebs  <[email protected]>

	From Per Bothner  <[email protected]>:
	* gdb.texinfo: Document Chill support.

Fri Jun  4 16:58:22 1999  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (SP_REGNUM, FP_REGNUM, PC_REGNUM): Add reference
 	to corresponding TARGET_READ_reg TARGET_WRITE_reg macros.
  	Document that the value should be greater-than or equal-to zero.
  	(NO_STD_REGS): Document. Deprecate.

Tue Jun  1 15:04:15 1999  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (TARGET_COMPLEX_BIT, TARGET_DOUBLE_COMPLEX_BIT):
 	Document that these are not used.

Thu May 27 09:28:15 1999  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (EXTRACT_STRUCT_VALUE_ADDRESS_P): Document.

Mon May 24 10:07:39 1999  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (FRAME_NUM_ARGS): Update definition.  Parameter
 	numargs was dropped.

Thu May 20 12:26:59 1999  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (FRAMELESS_FUNCTION_INVOCATION): Update.

Tue Apr 27 19:14:20 1999  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (SKIP_PROLOGUE, SKIP_PROLOGUE_FRAMELESS_P):
 	Update.

Thu Apr 22 13:07:37 1999  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (USE_GENERIC_DUMMY_FRAMES): Document.
	(GET_SAVED_REGISTER): Update, not just the a29k uses this.

Wed Apr 21 13:59:01 1999  Dave Brolley  <[email protected]>

	* gdbint.texinfo: Fix typos: $ -> @.

Tue Apr 20 11:59:38 1999  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (REGISTER_NAMES, BREAKPOINT, BIG_BREAKPOINT,
 	LITTLE_BREAKPOINT, LITTLE_REMOTE_BREAKPOINT,
 	BIG_REMOTE_BREAKPOINT): Deprecate in favor of REGISTER_NAME and
 	BREAKPOINT_FROM_PC.
	
Mon Apr 12 16:00:44 1999  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (CALL_DUMMY_STACK_ADJUST_P,
 	CALL_DUMMY_STACK_ADJUST): Document.

Thu Apr  8 17:23:15 1999  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (CALL_DUMMY_P, CALL_DUMMY_WORDS,
 	SIZEOF_CALL_DUMMY_WORDS, CALL_DUMMY): Define.

1999-04-02  Stan Shebs  <[email protected]>

	* gdbint.texinfo (MAINTENANCE_CMDS): Remove ref, since it no
	longer exists.

Tue Mar  9 19:25:11 1999  Stan Shebs  <[email protected]>

	* gdb.texinfo, remote.texi, all-cfg.texi, HPPA-cfg.texi: Remove
 	nearly all @ifset/@ifclear conditionals; nobody uses them, and
 	they make the manual source incomprehensible.
	* h8-cfg.texi: Remove, hasn't been used in years.

Thu Feb 11 18:00:59 1999  Stan Shebs  <[email protected]>

	* gdb.texinfo: Update the credits.

Mon Feb  8 17:33:57 1999  Stan Shebs  <[email protected]>

	* gdb.texinfo: Fix mistakes noticed in printout of last
	draft, add Alpha to discussion of heuristic fence post.

Fri Feb  5 17:20:00 1999  Stan Shebs  <[email protected]>

	* gdb.texinfo, remote.texi: Many changes; update to Seventh
 	Edition, merge some HP changes into mainline, describe some
 	previously undocumented features, describe more of the target
 	commands available, eliminate obsolete section on renamed
 	commands.
	* all-cfg.texi, HPPA-cfg.texi: Remove some obsolete conditionals.

Wed Jan 20 17:47:45 1999  Stan Shebs  <[email protected]>

	* gdb.texinfo: Make many HPPA conditionals unconditional,
	including catchpoint description, since now on for all configs.
	* all-cfg.texi: @clear HPPA, since is mainly for very HP-specific
	specializations.

Thu Jan 14 17:10:12 1999  Stan Shebs  <[email protected]>

	* Makefile.in (GDBvn.texi): Fix match expression to work with
	current format of VERSION in gdb/Makefile.in.
	* gdb.texinfo: Fix node ref to match new readline.

Wed Jan 13 10:38:40 1999  Edith Epstein  <[email protected]>

	* gdb.texinfo: Changes made as part of a project to merge in 
	  changes made by HP. Documentation makes extensive use of 
	  @ifclear HPPA and @ifset HPPA. The HP manual omits doumentation
	  on remote debugging. There are differences in documentation
 	  (HP vs.  non-HP) on C++ support (aCC vs. gnu gcc++). Also,
	  the HP manual discusses catchpoints, hardware watchpoints, and
	  some HPUX specific limitations for shared library support.
	  
	  There are also a number of @node changes.

1999-01-12  Jason Molenda  ([email protected])

	* gdbint.texinfo (Formatting): Disambiguate a sentence.
	(C Usage): Same.

Wed Jan  6 11:55:34 1999  David Taylor  <[email protected]>

	The following changes were made by Edith Epstein
 	<[email protected]> as part of a project to merge in changes
 	made by HP.
	
	* HPPA-cfg.texi: new file.

	* all-cfg.texi: set HPPA for HP PA-RISC targets.

	* refcard.tex: change documentation about catch.
	  removed info catch.

Mon Jan  4 18:29:18 1999  Stan Shebs  <[email protected]>

	* gdbint.texinfo: Expand on GDB's coding standards,
	specify the use of arg names with prototypes.

1998-12-14  J.T. Conklin  <[email protected]>

	* gdb.texinfo: Fix tipo.

Sun Dec 13 10:27:59 1998  Andrew Cagney  <[email protected]>

	* gdbint.texinfo: Document TARGET_BYTE_ORDER_DEFAULT and
 	TARGET_BYTE_ORDER_SELECTABLE_P.

Thu Dec 10 16:07:09 1998  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (FRAME_FIND_SAVED_REGS): Document.

1998-12-09  Jim Blandy  <[email protected]>

	* agentexpr.texi: New file.

Wed Dec  9 21:13:57 1998  Andrew Cagney  <cagney@chook>

	* gdbint.texinfo (REGISTER_NAME): Replace REGISTER_NAMES.

1998-12-03  J.T. Conklin  <[email protected]>

	* remote.texi: Changed wording that implied that the GDB remote
	protocol caches register values instead of GDB itself.

Tue Dec  1 17:45:43 1998  Stan Shebs  <[email protected]>

	* gdbint.texinfo: Add some info about symbol readers.
	(CHILL_PRODUCER, etc): Comment out descriptions, not useful.
	(IN_SOLIB_CALL_TRAMPOLINE): Rename info from IN_SOLIB_TRAMPOLINE.
	(IN_SOLIB_RETURN_TRAMPOLINE): Describe.
	(KERNEL_DEBUGGING, MIPSEL): No info about these, remove.

Mon Nov 30 11:32:21 1998  Andrew Cagney  <cagney@chook>

	* gdbint.texinfo (FRAME_CHAIN_VALID_ALTERNATE): 

Sat Nov 28 13:45:53 1998  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (INNER_THAN): Update, now takes parameters.

Fri Nov 27 12:39:45 1998  Andrew Cagney  <cagney@chook>

	* gdbint.texinfo (NO_SINGLE_STEP): Replace with
 	SOFTWARE_SINGLE_STEP_P and SOFTWARE_SINGLE_STEP.

Wed Oct 14 10:02:40 1998  Andrew Cagney  <[email protected]>

	* gdbint.texinfo: Fix minor typos.

Wed Sep 30 18:03:19 1998  Stan Shebs  <[email protected]>

	* gdbint.texinfo: Complete overhaul.  Group descriptions more
	logically, add more info on generic algorithms, remove much
	obsolete and/or wrong material.

Fri Jul 24 17:51:38 1998  Ian Lance Taylor  <[email protected]>

	* stabs.texinfo (Method Type Descriptor): Expand and correct.

Mon May  4 10:37:12 1998  Brian Youmans ([email protected])

	* refcard.tex:  Copyright, address updates.

Tue Apr 21 18:09:56 1998  Stan Shebs  <[email protected]>

	* gdb.texinfo (EDITION, DATE): Update and change to use ordinals
	for the edition instead of confusing GDB-version-like numbers.

Mon Apr 13 14:05:00 1998  Fred Fish  <[email protected]>

	* gdb.texinfo (hbreak, watch): Fix typo, "date" -> "data".

Thu Apr  2 16:52:44 1998  Jason Molenda  ([email protected])

        * LRS: Reformat a bit to keep text under 80 columns.

Thu Apr  2 16:10:36 1998  Stan Shebs  <[email protected]>

	* gdb.texinfo: Add some credits, mention bug monitor.
	* remote.texi: Mention mips monitor targets.
	* gdbint.texinfo: Describe SP_REGNUM, STEP_SKIPS_DELAY.
	
Mon Feb  2 17:13:03 1998  Stan Shebs  <[email protected]>

	* gdbint.texinfo: Remove obsolete mentions of pinsn.c and opcode.h
 	files, finish sorting of host vs target vs native macros, describe
 	some more of them.

Tue Jan 13 16:44:50 1998  Fred Fish  <[email protected]>

	* gdbint.texinfo (Host Conditionals): Document change from
	using NO_MMALLOC to it's inverse, USE_MMALLOC.

Mon Nov 24 13:55:21 1997  Andrew Cagney  <[email protected]>

	* gdbint.texinfo (Host Conditionals): Document
 	PRINTF_HAS_LONG_DOUBLE, SCANF_HAS_LONG_DOUBLE, HAVE_LONG_DOUBLE.

Fri Jul  4 14:52:31 1997  Ian Lance Taylor  <[email protected]>

	* gdbint.texinfo (Host Conditionals): Add CRLF_SOURCE_LINES.
	Document LSEEK_NOT_LINEAR.

Tue Mar 25 14:44:09 1997  Ian Lance Taylor  <[email protected]>

	* stabs.texinfo (Stab Section Basics): Make it clear that only
	some versions of the GNU linker remove the leading N_UNDF symbol.

Thu Feb 27 17:45:19 1997  Ian Lance Taylor  <[email protected]>

	* stabs.texinfo (String Field): Document type number pairs here,
	instead of in the Sun specific section.
	(Include Files): The GNU linker supports the N_BINCL
	optimization.  Clarify the N_BINCL value, and what it is used
	for.
	(Procedures): Document N_FUN with an empty string to mark the end
	of a function.
	(Typedefs): Mention that Sun compilers may use N_GSYM for a type.
	(Sun Differences): Remove this node, as the information is now
	elsewhere in the main document.
	(Stab Section Basics): Mention that the GNU linker may optimize
	stabs and remove the leading N_UNDF symbol.

Mon Dec  9 12:23:32 1996  Roland Pesch  <[email protected]>

	* gdb.texinfo, refcard.tex: Restore author credit

Wed Oct  2 22:01:36 1996  Fred Fish  <[email protected]>

	* gdbint.texinfo (SIGTRAMP_START, SIGTRAMP_END): Update
	documentation to account for START and END macros taking
	one arg.

Thu Aug 22 17:59:03 1996  Fred Fish  <[email protected]>

	From: Eberhard Mattes <[email protected]>
	* gdb.texinfo (Frames): Fix typo.

Tue Jul 23 10:06:20 1996  Fred Fish  <[email protected]>

	* gdbint.texinfo (NO_SINGLE_STEP): Document that single_step takes
	a target_signal as arg type, not a pid.

Fri Jul 12 11:10:05 1996  Stu Grossman  ([email protected])

	* gdb.texinfo:  Document `set assembly-language'.

Thu Jul 11 13:50:28 1996  Stan Shebs  <[email protected]>

	* remote.texi: Update list of stubs in the GDB distribution.

Fri Jul  5 15:38:54 1996  Fred Fish  <[email protected]>

	* gdbint.texinfo (NO_MMCHECK): Renamed from NO_MMALLOC_CHECK.
  	Also document that some systems can use mmalloc but must define
 	this if their C runtime allocates memory that is later freed.
	(MMCHECK_FORCE): Document new macro.
	
Fri Jun 28 22:17:10 1996  Dawn Perchik  <[email protected]>

	* remote.texi: Add documentation for target Sparclet.

Mon Jun 24 18:12:22 1996  Jason Molenda  ([email protected])

	* Makefile.in (srcdir, VPATH, prefix, infodir, INSTALL, 
	INSTALL_PROGRAM, INSTALL_DATA): Use autoconf set values.
	* configure.in: Rewritten for autoconf.
	* configure: New.

Mon Jun 17 10:43:41 1996  Fred Fish  <[email protected]>

	* Makefile.in (DVIPS): New define, set to dvips.
	(dvi): Add stabs.dvi.
	(ps): New target.
	(all-doc): Depend on info, dvi, and ps targets.
	(STAGESTUFF): Add *.ps and *.dvi files.
	(clean-info, clean-dvi): Remove.
	(mostlyclean): Does not depend upon clean-info or clean-dvi,
	rules completely rewritten.
	(maintainer-clean): Remove clean-info and clean-dvi
	dependencies and put their actions in the rules.
	(gdb.ps): New target
	(gdb.dvi, gdbgui.dvi, gdbint.dvi, stabs.dvi): Remove 
	intermediate TeX files, whether they have 2 or 3 character
	extensions.
	(gdbint.ps): Add target and rules.
	(gdb-internals): Delete unused target.
	(Makefile): Depends upon config.status also.

Sat Mar 30 15:46:58 1996  Fred Fish  <[email protected]>

	* gdbint.texinfo (CC_HAS_LONG_LONG): Clarify when/how this is
	set.

Sat Mar 16 15:10:20 1996  Fred Fish  <[email protected]>

	From Peter Schauer <[email protected]>
	* gdb.texinfo (Expressions): Fix erroneous array constant example.

Sat Mar 16 13:28:45 1996  Fred Fish  <[email protected]>

	* gdb.texinfo: Add missing "@bullet" to some "@itemize" commands.

Sat Feb 10 03:28:36 1996  Peter Schauer  ([email protected])

	* gdb.texinfo (Print settings):  Document
	`set/show print static-members' commands.

Wed Jan 10 14:16:37 1996  Fred Fish  <[email protected]>

	* gdbint.texinfo (Native): Document name change, coredep.c to
	core-aout.c.

Wed Dec 13 12:35:28 1995  Ian Lance Taylor  <[email protected]>

	* stabs.texinfo (Include Files): Document the values the SunOS4
	linker creates for N_BINCL/N_EINCL/N_EXCL stabs.

Fri Dec  8 21:08:44 1995  Fred Fish  <[email protected]>

	* gdbint.texinfo (Releases): Change gdb.tar.Z to gdb.tar.gz.
	Fix typo.

Fri Dec  1 11:07:50 1995  Fred Fish  <[email protected]>

	* gdbint.texinfo (Releases): Make "gdb.tar.gz" rather than
	"gdb.tar.Z".

Wed Sep 20 13:14:10 1995  Ian Lance Taylor  <[email protected]>

	* Makefile.in (maintainer-clean): New target, synonym for
	realclean.

Thu Aug  3 10:45:37 1995  Fred Fish  <[email protected]>

	* Update all FSF addresses except those in COPYING* files.

Wed Jul 19 18:43:03 1995  Stan Shebs  <[email protected]>

	From Richard Earnshaw ([email protected]):
	* gdb.texinfo (convenience variables): Document $_exitcode.
	(quit): Document optional expression to use as exit code.

Thu Jun 22 21:27:33 1995  Victoria Mixon  <[email protected]>

	* gdb.texinfo, remote.texi: Brought up to date with various
	GDB changes.

Tue Jun 20 14:35:38 1995  Stan Shebs  <[email protected]>

	* gdb.texinfo: Update dates and versions, fix comments about
	hardware watchpoints in future releases and about the
	sharedlibrary command.

Mon May  8 09:30:36 1995  Jim Kingdon  ([email protected])

	* stabs.texinfo: Remove node `XCOFF differences'.  Describe value of
	C_FUN stab.  Other cleanups.

Wed Apr 19 07:02:19 1995  Jim Kingdon  ([email protected])

	* remote.texi (Bootstrapping): Clarify that flush_i_cache is only
	for the sparc stub.

Tue Apr 11 11:41:49 1995  Jim Kingdon  ([email protected])

	* annotate.texi: Clarify which addresses have differing formats
	depending on the language and which do not.

Tue Mar 28 16:56:22 1995  J.T. Conklin  <[email protected]>

	* remote.texi (NetWare): Changed example to use BOARD= instead of
	  NODE= argument to reflect correspoding change to gdbserve.nlm.

Fri Mar 17 06:47:02 1995  Jim Kingdon  ([email protected])

	* stabs.texinfo (Negative Type Numbers): Mention the fact that
	GDB, as well as AIX dbx, supports the size type attribute.

Thu Mar 16 12:11:32 1995  Jim Kingdon  ([email protected])

	* stabs.texinfo (Negative Type Numbers): Document types -31 to -34.

Mon Mar 13 16:49:13 1995  Per Bothner  <[email protected]>

	* gdb.texinfo (Define):  Document $arg0... arguments to commands,
	and new 'if' and 'while' commands.

Fri Feb 17 15:24:35 1995  Per Bothner  <[email protected]>

	* gdb.texinfo (Artificial arrays):  Note use of coerce-to-array-type.

Wed Feb 15 11:59:18 1995  J.T. Conklin  <[email protected]>

	* all-cfg.texi: New flag, GDBSERVE, for NetWare's gdbserve.nlm.
	* remote.texi (NetWare): New node, how to use gdbserve.nlm on
	  NetWare targets.  Mostly stolen from the Server node.

Fri Feb 10 20:20:08 1995  Jim Kingdon  ([email protected])

	* gdb.texinfo (Setting): Talk about the language of a source file
	versus the working language.  The old documentation did not match
	what GDB did.

Wed Feb  1 20:26:36 1995  Jim Kingdon  ([email protected])

	* stabs.texinfo (Source Files): Document N_SO used to mark the end
	of a source file.

Mon Jan 23 14:23:37 1995  Jim Kingdon  ([email protected])

	* gdb.texinfo (Processes): New node.

Tue Jan 17 14:09:03 1995  Ian Lance Taylor  <[email protected]>

	* remote.texi: Update documentation of set/show mipsfpu.

Fri Jan  6 17:17:28 1995  Stan Shebs  <[email protected]>

	* gdbgui.texinfo: New file, manual for GUI (gdbtk) users.
	* Makefile.in (gdbgui.dvi, gdbgui.info): New actions.

Sun Sep  4 16:47:21 1994  Stan Shebs  ([email protected])

	* gdbint.texinfo: Removed mentions of some incorrectly placed and
	obsolete conditionals, described some others.

Mon Aug  1 15:42:39 1994  Jim Kingdon  ([email protected])

	* gdbint.texinfo: Remove references to BROKEN_LARGE_ALLOCA and
	SET_STACK_LIMIT_HUGE; they were removed from GDB 14 May 1994.

Mon Aug  1 15:12:02 1994  Stan Shebs  ([email protected])

	* gdbint.texinfo: Put regex conditionals in their own table.

Tue Jul 26 18:32:52 1994  Stan Shebs  ([email protected])

	* gdbint.texinfo: Removed mentions of many obsolete conditionals,
	described or fixed the descriptions of many others.

Sun Jul 17 14:14:03 1994  Stan Shebs  ([email protected])

	* gdb.texinfo: Add some more credits.
	* gdbint.texinfo: Capitalize GDB consistently, describe some
	macros and remove some.

Thu Jul 14 18:43:17 1994  Stan Shebs  ([email protected])

	* gdbint.texinfo: Removed mentions of many incorrectly placed and
	obsolete conditionals, described some others.

Tue Jul 12 12:23:15 1994  Peter Schauer  ([email protected])

	* gdb.texinfo (help targets):  Changed to `help target', which
	is the correct gdb command.

Wed Jun 22 18:00:51 1994  Jim Kingdon  ([email protected])

	* annotate.texi (TODO): New node, for keeping track of annotations
	suggested but not yet implemented.

Wed Jun  1 16:10:45 1994  Jim Kingdon  ([email protected])

	* stabs.texinfo (Statics): Value of xcoff C_BSTAT points to
	another symbol, it is not the address itself.

Thu May  5 20:23:36 1994  Stan Shebs  ([email protected])

	* stabs.texinfo (Stab Section Basics): Add comment about alignment
	of stabs-in-coff sections.

Wed May  4 06:26:11 1994  Jim Kingdon  ([email protected])

	* annotate.texi: Change edition to 0.5 and date to May 1994.
	Add index.
	(Frames): New node, for frame annotation.
	(Displays): New node, for display annotation.

	* remote.texi (MIPS Remote): Say that set timeout doesn't apply
	when waiting for your program to stop.

Fri Apr 29 18:24:46 1994  Jim Kingdon  ([email protected])

	* annotate.texi (Breakpoint Info): Document annotation of header
	fields and record annotation.

Thu Apr 28 07:44:28 1994  Jim Kingdon  ([email protected])

	* annotate.texi: New file, to document annotations.

Thu Apr 21 14:20:51 1994  Jim Kingdon  ([email protected])

	* Makefile.in (clean): Don't remove GDBvn.texi (apparently on Jan
	16 I meant to make this change but did not).  Do remove gdb-cfg.texi.

Wed Apr 20 11:22:48 1994  Jim Kingdon  ([email protected])

	* stabs.texinfo (Stab Section Basics): Say what is in .stab
	section, and say n_strx field is compilation unit relative.
	* stabs.texinfo: Don't use @code for a.out when it is the name of
	an object file format.

Wed Apr 13 20:29:54 1994  Jim Kingdon  ([email protected])

	* gdb.texinfo: Refer to file names, not path names, per rms
	convention.
	(Arguments): Fix typo.

Thu Mar 24 08:09:12 1994  Jim Kingdon  ([email protected])

	* stabs.texinfo (Global Variables): Talk about stabs in files
	where variables are referenced, but not defined.

Wed Mar 23 07:16:36 1994  Jim Kingdon  ([email protected])

	* stabs.texinfo: Move stuff on @ and # type descriptors from node
	Cplusplus to new nodes Member Type Descriptor and Method Type
	Descriptor.  Re-write stuff for #.

Wed Mar 16 08:20:19 1994  Jim Kingdon  ([email protected])

	* gdb.texinfo (Print Settings): Don't document "set print
	fast-symbolic-addr off".  The bug which it worked around was fixed
	on 25 Feb 94 in coffread.c, so I'm nuking the command.

	* stabs.texinfo (Alternate Entry Points): New node, rewritten from
	N_ENTRY node.

	* stabs.texinfo (Type Descriptors): Add 'Y' type descriptor.

Tue Mar 15 08:43:02 1994  Jim Kingdon  ([email protected])

	* gdbint.texinfo (Host Conditionals, Target Conditionals): Remove
	references to ieee-float.c.

Fri Mar 11 08:09:40 1994  Jim Kingdon  ([email protected])

	* gdb.texinfo (Set Breaks): Update documentation for tbreak to
	match what the code actually does.

Wed Mar  9 19:43:05 1994  Jim Kingdon  ([email protected])

	* stabs.texinfo (Symbol Descriptors): Add OS9000 symbol descriptor s.

Tue Mar  1 17:04:43 1994  Jim Kingdon  ([email protected])

	* stabs.texinfo (Type Descriptors): Add OS9000 type descriptors c,
	i, and b.

Wed Feb 23 10:44:18 1994  Jim Kingdon  ([email protected])

	* stabs.texinfo: Document N_RBRAC as function relative for COFF as
	well as for ELF and SOM.  Unify the descriptions of ELF and SOM
	as "stabs in sections" rather than just saying "ELF and SOM".
	Also make that stuff apply to COFF.

Fri Feb 18 08:25:58 1994  Jim Kingdon  ([email protected])

	* gdb.texinfo (Formatting Documentation): Change GhostScript to
	Ghostscript.

Fri Feb  4 06:31:31 1994  Jim Kingdon  ([email protected])

	* gdb.texinfo (Continuing and Stepping): When talking about "step"
	versus functions without line numbers, also mention stepping into
	them as well as "step" when you are in them.  Tell the user how to
	deal with the situation.  Add comment about "debugging information".

Thu Feb  3 11:39:59 1994  Jim Kingdon  ([email protected])

	* stabs.texinfo (Enumerations): Document restriction on where
	enumeration types can appear and still win with GDB.

Wed Feb  2 11:29:17 1994  Jim Kingdon  ([email protected])

	* stabs.texinfo (Negative Type Numbers): Document format for type
	-16.

Thu Jan 27 16:53:56 1994  Jim Kingdon  ([email protected])

	* gdb.texinfo (Selection, Frame Info): Update information about
	arbitrary frame specficiations.

Wed Jan 26 15:31:57 1994  Roland H. Pesch  ([email protected])

	* gdb.texinfo, remote.texi: general editing pass prior to Net release

Tue Jan 25 12:12:04 1994  Jim Kingdon  ([email protected])

	* stabs.texinfo (String Field): Discuss continuing stabs with ?.

Wed Jan 19 06:39:24 1994  David J. Mackenzie  ([email protected])

	* stabs.texinfo (Non-Stab Symbol Types): Mention N_SET* | N_EXT.

Sun Jan 16 12:43:32 1994  Jim Kingdon  ([email protected])

	* stabs.texinfo: Re-do stuff about C_BSTAT and move from XCOFF
	Differences node to Statics node.
	(Statics): Discuss XCOFF use of V symbol descriptor.

	* Makefile.in: Remove refcard.dvi and GDBvn.texi in realclean,
	not clean.

Wed Jan 12 21:29:54 1994  John Gilmore  ([email protected])

	* gdb.texinfo (Print Settings): Document `set print
	fast-symbolic-addr' and improve the doc for some other
	`set print's.

Mon Jan  3 17:23:07 1994  Jim Kingdon  ([email protected])

	* stabs.texinfo (String Field): Talk about defining several type
	numbers at once.
	Fix lint regarding changing node ELF Transformations to
	ELF and SOM Transformations.

Fri Dec 31 00:42:43 1993  John Gilmore  ([email protected])

	* stabs.texinfo:  Insert Peter Kessler's name as inventor (I think).

Tue Dec 28 09:30:40 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Cross-References): `::' is for nested types only
	within <>.
	(Structures): Document static members.

Mon Dec 27 13:55:04 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo: Document S type attribute.

Sun Dec 26 20:46:36 1993  Jeffrey A. Law  ([email protected])

	* stabs.texinfo: Add notes about stabs-in-som where appropriate.

Fri Dec  3 19:13:19 1993  John Gilmore  ([email protected])

	* gdbint.texinfo:  Fix a few typos.

Sun Nov 28 18:06:25 1993  Roland H. Pesch  ([email protected])

	* gdb.texinfo, remote.texi: formatting improvements

	* gdb.texinfo (New Features): mention threads.
	(Summary, C): fix xrefs in newly contributed text.
	(Threads): index entries, clarifications, example
	(passim): minor typos fixed, phrasing improvements

	* remote.texi (Bootstrapping): rephrase text on ^C and add index
	entries; (Server): explain use of gdbserver w/real-time systems,
	add example of conflicting TCP port; (MIPS Remote) break up
	running text into table, highlighting commands, and add example.
	
Wed Nov 24 14:15:56 1993  Roland H. Pesch  ([email protected])

	* refcard.tex: avoid bad linebreaks even when REFEDITS=psrc.sed

Fri Nov 12 16:10:58 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Nested Symbols): New node.
	(String Field, Symbol Descriptors, Cross-References): Refer to it.

Thu Nov 11 13:26:45 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Stabs in ELF): Clarify how Bbss.bss work with respect
	to picking which Bbss.bss symbol to use, and (because there seems to
	be no good way of doing it) re-write some of the text to make it
	sound like Bbss.bss isn't such a great idea after all (as currently
	designed).

	* gdb.texinfo (C): In addition to saying people have to use g++ for
	good results, say they have to use stabs.  Specifically say cfront
	doesn't work well.
	(Summary): Merge in information on Modula-2, Pascal, and Chill from
	the gdb README.  Add xrefs to places where the support for the various
	languages is described in detail.

Mon Nov  8 11:47:34 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo: Clean up stuff about visibility and virtual
	characters.

	* stabs.texinfo (N_M2C): Cite Sun doc.

Fri Nov  5 16:27:27 1993  Roland H. Pesch  ([email protected])

	* gdb.texinfo: updates re threads.
	* remote.texinfo: avoid index entries starting with digits.

Tue Nov  2 09:08:37 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Enumerations): Talk about large, negative and
	octal values.  Clean up cross reference to type attributes.
	(String Field): Say that GDB 4.11 supports size attribute.

Sun Oct 31 13:31:10 1993  Jim Kingdon  ([email protected])

	* remote.texi (VxWorks Remote): Clarify that rebuilding VxWorks kernel
	is a mandatory step.  Make the stuff about that more concise.

Wed Oct 27 00:25:46 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Class Names): New node.

	* gdb.texinfo (Command Files): Explain order of init file reading.

	* remote.texi (Bootstrapping): Talk about getting the serial driver
	to deal with ^C sent by gdb to stop the remote system.

Mon Oct 25 03:25:41 1993  Tom Lord  ([email protected])

	* libgdb.texinfo (I/O): incorporated better phrasing from rich.

	* libgdb.texinfo (Defining Commands): made the DOC arg
	to gdb_define_app_command a char * instead of char **
	per a suggestion from kingdon.

	* libgdb.texinfo: total rewrite from a different starting
	premise.

Wed Oct 20 18:07:44 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Local Variable Parameters): Re-write paragraph on
	floats passed as doubles (to improve clarity).

Tue Oct 19 14:21:18 1993  Roland H. Pesch  ([email protected])

	* gdb.texinfo (Source Path): index entries for $cwd, $pdir

	* a4rc.sed: update to work with Andreas Vogel papersize params

	* refcard.tex: use Andreas Vogel simplifications of papersize
	params; remove useless version info; update copyright date.

Tue Oct 19 10:46:22 1993  Jim Kingdon  ([email protected])

	* gdb.texinfo (Symbols): Add class NAME to doc for ptype.

Tue Oct 12 09:11:45 1993  Jim Kingdon  ([email protected])

	* gdb.texinfo (Files): Say what address the load command loads it at.

	* stabs.texinfo (Common Blocks): Minor cleanups.

	* stabs.texinfo: Update ld stabs in elf relocation to reflect the fact
	that Sun has backed away from the linker kludge and thus the relevant
	issue is changes to the SunPRO tools, not the Solaris linker.

	* stabs.texinfo (Traditional Integer Types): Clean up description
	of octal bounds a little bit.  Document extra leading zeroes.

Thu Oct  7 16:15:37 1993  Jim Kingdon  ([email protected])

	* gdb.texinfo (Signaling): Update for symbolic symbol names
	and add a section explaining the difference between the GDB
	signal command and the shell kill utility.

Wed Oct  6 13:23:01 1993  Tom Lord  ([email protected])

	* libgdb.texinfo: added `@' to braces that were unescaped.

Mon Oct  4 10:42:18 1993  Tom Lord  ([email protected])

	* libgdb.texinfo: new file.  Spec for the gdb library.

Sun Oct  3 15:26:56 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Include Files): Fix typo (start -> end).

Thu Sep 30 18:24:56 1993  Roland H. Pesch  ([email protected])

	* gdb.texinfo, remote.texi: assorted small improvements, mostly
	from Melissa at FSF's editing pass.

Thu Sep 30 11:54:38 1993  Jim Kingdon  ([email protected])

	* gdb.texinfo: Remove stuff about ar and 14 character filenames.
	I believe this was fixed by the 13 Sep 89 change to print_frame_info.
	Also, modern versions of ar like BSD 4.4 or SVR4 don't have this bug.

Wed Sep 22 21:22:11 1993  Jim Kingdon  ([email protected])

	* remote.texi (Bootstrapping): Discuss 386 call gates.

Sat Sep 18 17:10:44 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Based Variables): New node.

Thu Sep 16 17:48:55 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Negative Type Numbers): Re-write discussions of
	names, sizes, and formats to suggest how not to lose.

Sat Sep 11 09:35:11 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Methods): Fix typo.

Fri Sep 10 06:34:20 1993  David J. Mackenzie  ([email protected])

	* gdb.texinfo: Fix a few typos.

Wed Sep  8 09:11:52 1993  Jim Kingdon  ([email protected])

	* gdb.texinfo: Clarify how well it works with Fortran.

	* stabs.texinfo (Stabs In ELF, Statics, ELF Transformations):
	More on relocating stabs in ELF files.

Tue Sep  7 13:45:02 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Stabs In ELF): Talk about N_FUN value.

Mon Sep  6 19:23:18 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Local Variable Parameters): Talk about nameless
	parameters on VAX.

Fri Sep  3 17:06:08 1993  Roland H. Pesch  ([email protected])

	* gdb.texinfo: @up/@down -> @raisesections/@lowersections

Fri Sep  3 12:04:15 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo: Make info author notice match the TeX author notice.

Tue Aug 31 13:21:06 1993  David J. Mackenzie  ([email protected])

	* stabs.texinfo: Initial-caps all words in node names and
	non-trivial words in section names.

Mon Aug 30 11:13:16 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo: Many minor cleanups.

	* stabs.texinfo: Remove @deffn except from Expanded Reference node.

Sat Aug 28 12:08:09 1993  David J. MacKenzie  ([email protected])

	* stabs.texinfo: Remove full description of big example.
	It's not really helpful; just use pieces of it where appropriate.
	Add more Texinfo formatting directives (@samp, etc.).
	Use @deffn to define stab types.
	Eliminate some wordiness.  Break up some nodes.
	Add an (alphabetized) index of symbol types.
	Use consistent capitalization style in node and section names.

Thu Aug 26 06:36:31 1993  Fred Fish  ([email protected])

	* gdb.texinfo:  Change typo "Two two" to "The two".

Sun Aug 22 12:15:18 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (XCOFF-differences): Remove references to
	non-existent types N_DECL and N_RPSYM.

	* stabs.texinfo (String Field): Say that type attributes bug is
	fixed in GDB 4.10, since it is.

	* stabs.texinfo: Clean up djm cleanups, and more cleanups of my own.

Sat Aug 21 04:32:28 1993  David MacKenzie  ([email protected])

	* stabs.texinfo: Formatting cleanups.

Fri Aug 20 20:49:53 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo: When explaining the n_type of a stab, standardize
	how we do it ('#' as a comment indicator, "36 is N_FUN" as text,
	no tabs, use @r).
	(Global Variables): Clean up.

Tue Aug 17 15:57:27 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Stack Variables): Re-write.

Mon Aug 16 21:20:08 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Stabs-in-elf): Talk about getting the start
	addresses of a source file.  Also revise formatting.
	Change "object module" or "object file" to "source file".
	Various: Miscellaneous cleanups.

Thu Aug 12 15:11:51 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo: Point to mangling info in gcc's gpcompare.texi.

Tue Aug 10 16:57:49 1993  Stan Shebs  ([email protected])

	* gdbint.texinfo: Removed many nonsensical machine-collected
	host and target conditionals, described some of the remainder.

Tue Aug 10 13:28:30 1993  Jim Kingdon  ([email protected])

	* gdbint.texinfo (Getting Started): Use @itemize, not @table.

	* gdbint.texinfo (Top): Add name to @top line, and re-write the
	paragraph which follows.

	* gdbint.texinfo (Host): Use @code not @samp for Makefile
	variables.  Looks better and avoids overful hbox.

Fri Jul 30 18:26:21 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Procedures): Improve stuff on nested functions.

Thu Jul 29 15:10:58 1993  Roland H. Pesch  ([email protected])

	* remote.texi: (MIPS Remote) clearer doc for set/show timeout,
	retransmit-timeout

Thu Jul 29 13:16:09 1993  Jim Kingdon  ([email protected])

	* gdbint.texinfo: Update statement about `some ancient Unix
	systems, like Ultrix 4.0' to Ultrix 4.2.

Wed Jul 28 15:26:53 1993  Roland H. Pesch  (pesch@el_bosque.cygnus.com)

	* h8-cfg.texi, all-cfg.texi: new flag GDBSERVER

	* Makefile.in: depend on remote.texi rather than gdbinv-s.texi

	* remote.texi: (Server) New node on gdbserver.  (Remote Serial,
	ST2000 Remote, MIPS Remote): mention `host:port' syntax for TCP.

	* remote.texi: new name for former gdbinv-s.texi

	* gdb.texinfo: use remote.texi rather than gdbinv-s.texi

Wed Jul 28 08:26:24 1993  Ian Lance Taylor  ([email protected])

	* gdbinv-s.texi: Documented timeout and retransmit-timeout
	variables for MIPS remote debugging protocol.

Mon Jul 26 13:00:09 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Negative Type Numbers): FORTRAN LOGICAL fix.

Tue Jul 20 16:30:41 1993  Jim Kingdon  ([email protected])

	* Makefile.in (refcard.dvi): Use srcdir where necessary.

Mon Jul 19 12:02:50 1993  Roland H. Pesch  ([email protected])

	* gdb.texinfo: repair conditional bugs in text markup

Fri Jul 16 18:57:50 1993  Roland H. Pesch  ([email protected])

	* gdb.texinfo, all-cfg.texi, h8-cfg.texi: introduce MOD2 switch
	to select Modula-2 material.

Thu Jul 15 13:15:01 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo: Cleanups regarding statics.

	* gdbinv-s.texi (Bootstrapping): Document exceptionHandler.
	(Debug Session): Mention exceptionHandler.  Add xref to Bootstrapping.

Mon Jul 12 13:37:02 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo: N_MAIN is sometimes used for C.

Fri Jul  9 09:47:02 1993  Peter Schauer  ([email protected])

	* gdbint.texinfo (Host, Target Conditionals): Remove TM_FILE_OVERRIDE.

Tue Jul  6 12:41:28 1993  John Gilmore  ([email protected])

	* gdbint.texinfo (Target Conditionals): Remove NO_TYPEDEFS,
	removed from the code by Kingdon. 

Tue Jul  6 12:24:34 1993  Jim Kingdon  ([email protected])

	* gdb.texinfo (Break Commands): Remove stuff about flushing terminal
	input when evaluating breakpoint conditions; the bug has been fixed.

	* gdb.texinfo (Continuing and Stepping): Argument to "continue"
	sets the ignore count to N-1, not to N.

Thu Jul  1 14:57:42 1993  Roland H. Pesch  ([email protected])

	* refcard.tex (\hoffset): correct longstanding error to match
	  intended offset; avoids cutting off edge on some printers

Wed Jun 30 18:23:06 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Parameters): Say that order of stabs is significant.

Fri Jun 25 21:34:52 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Common Blocks): Say what Sun FORTRAN does.

Fri Jun 25 16:15:10 1993  Roland H. Pesch  ([email protected])

	* Makefile.in: (REFEDITS) new var to control whether PS or CM
	fonts and whether US or A4 paper for GDB refcard; (refcard.dvi)
	collect sed edits if any, apply to refcard before formatting;
	(refcard.ps) stop implying PS fonts if PS output requested;
	(lrefcard.ps) delete extra target for variant PS fonts

	* refcard.tex: parametrize papersize dependent info, collect
	  in easily replaced spot

	* a4rc.sed: new file, edits to refcard for A4 paper

Fri Jun 25 14:21:46 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Negative Type Numbers): Type -16 is 4 bytes.

Wed Jun 23 15:02:50 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Negative Type Numbers): Minor character cleanups.

Tue Jun 22 16:31:52 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo: Express disapproval of 'D' symbol descriptor
	politely rather than rudely.

Fri Jun 18 19:42:09 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo: Document common blocks.

Fri Jun 18 12:12:57 1993  Fred Fish  ([email protected])

	* stabs.texinfo:  Add some basic info about stabs-in-elf.

Fri Jun 18 13:57:09 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Top): Minor cleanup.

Mon Jun 14 16:16:51 1993  david d `zoo' zuhn  (zoo at rtl.cygnus.com)

	* Makefile.in (install-info): remove parentdir support

Tue Jun 15 18:11:39 1993  Roland H. Pesch  ([email protected])

	* gdb.texinfo (Copying): delete this node and references to it;
	RMS says this manual need not carry GPL. (passim): Improvements
	from last round at FSF, largely due to Ian Taylor review, and
	minor formatting improvements.

	* gdbinv-s.texi (passim): Improvements from last round at FSF,
	largely due to Ian Taylor review. (Debug Session): minor edits to
	new text.

Sun Jun 13 12:52:39 1993  Jim Kingdon  ([email protected])

	* Makefile.in (realclean): Remove info and dvi files too.

Sat Jun 12 16:09:22 1993  Jim Kingdon  ([email protected])

	* {all,h8}-config.texi: Rename to *-cfg.texi for 14 char filenames.
	* Makefile.in: Change accordingly.  gdb-config.texi -> gdb-cfg.texi.
	* gdb.texinfo: Change accordingly.

	* stabs.texinfo: Clean up N_{L,R}BRAC.  Discuss what addresses of
	N_{L,R}BRAC,N_SLINE are relative to.

Fri Jun 11 15:15:55 1993  Jim Kingdon  ([email protected])

	* Makefile.in (GDBvn.texi): Update atomically.

Wed Jun  9 10:58:16 1993  Jim Kingdon  ([email protected])

	* gdbinv-s.texi (Debug Session): Document exceptionHook.

Tue Jun  8 13:42:04 1993  Jim Kingdon  ([email protected])

	* gdb.texinfo (Print Settings): Move all stuff relating to symbolic
	addresses together.  Also motivate the set print symbol-filename
	command and suggest other solutions.

Tue Jun  1 22:46:43 1993  Fred Fish  ([email protected])

	* gdb.texinfo (set print elements):  Note that the number of
	elements is set to unlimited by "set print elements 0".

Mon May 31 08:06:55 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Builtin Type Descriptors): Try to clarify what
	NF_LDOUBLE means.
	(Stab Types): Include Solaris stab types.
	(Procedures): Document Solaris extensions.

Thu May 27 06:20:42 1993  Peter Schauer  ([email protected])

	* gdb.texinfo:  Add `set print symbol-filename' doc.

Wed May 26 00:26:42 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Arrays): Talk about type definition vs. type
	information.

	* stabs.texinfo (Builtin Type Descriptors): Talk about omitting
	the trailing semicolon.

Tue May 25 14:49:42 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Line Numbers, Source Files): Re-write these two nodes
	and merge in other parts of the document addressing these subjects.
	gdbint.texinfo (XCOFF): Remove info which is now in stabs.texinfo.

	* stabs.texinfo (Subranges, Arrays): Try to explain about the semicolon
	at the end of a range type.

	* stabs.texinfo (Subranges): "A offset" and "T offset" are not
	AIX extensions.

Mon May 24 09:00:33 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Stabs Format):  Misc fixes.

Sat May 22 10:40:56 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Constants):  Allow an `e' constant to be non-enum.
	(Traditional builtin types): Document convex convention for long long.
	(Negative builtin types): Discuss type names, and misc fixes.

Fri May 21 11:20:31 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Builtin Type Descriptors): Document the floating
	point types used with @samp{R} type descriptor.
	(Symbol Descriptors): Describe how to handle conflict between
	different meanings of @samp{P} symbol descriptor.

Thu May 20 13:35:10 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo: Remove node Quick Reference and put its children
	directly under the main menu.

	* stabs.texinfo: Many more changes to bring it into line with
	AIX documentation and reality.  I think it now has all the
	information from the AIX documentation, except that I burned
	out when I got to variant records (Pascal and Modula-2) and
	all the COBOL types.  Oh well, we can add them later when we're
	worrying more about those languages.

	* stabs.texinfo (Automatic variables): Talk about what it means
	to omit the symbol descriptor.

Tue May 18 17:59:18 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Parameters): Add "(sometimes)" when describing
	gcc2 behavior with promoted args.

Fri May 14 21:35:29 1993  Roland H. Pesch  ([email protected])

	* gdb.texinfo: include readline appendices in info version of manual

Fri May  7 11:56:18 1993  Roland H. Pesch  ([email protected])

	* gdbinv-s.texi (Remote Serial): describe new ^C behavior in
	target remote.

	* gdb.texinfo (Machine Code): more index entries for disassemble

Fri May  7 10:12:30 1993  Fred Fish  ([email protected])

	* Clarify the intended use of the gdb-testers and gdb-patches
	mailing lists, and shrink gzip comment.

Thu May  6 16:39:50 1993  Roland H. Pesch  ([email protected])

	* gdb.texinfo (Shell Commands): do not mention SHELL env var in
	DOSHOST configuration of manual.

	* gdb.texinfo (MIPS Stack): new node.

	* all-config.texi (MIPS) new switch.

	* gdbinv-s.texi (Nindy Options) Remove two instances of future
	tense; (MIPS Remote) new node.

	* gdb.texinfo (passim) rephrases to work around makeinfo @value
	bug; (Environment) less passive, other small cleanups in text about
	.cshrc/.bashrc; (Invoking GDB) new MIPS Remote menu entry;
	(Remote) new MIPS Remote menu entry.

Thu Apr 29 09:36:25 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo: Many changes to include information from the
	AIX documentation.

	* gdb.texinfo (Environment): Mention pitfall with .cshrc.

Tue Apr 27 14:02:57 1993  Jim Kingdon  ([email protected])

	* gdbint.texinfo (new node Debugging GDB, elsewhere):
	Move a bunch of information from ../README.
	(Getting Started): New node.

Fri Apr 23 17:21:13 1993  Roland H. Pesch  ([email protected])

	* gdbinv-s.texi, gdb.texinfo: include Hitachi SH target

	* gdb.texinfo: advance manual revision dates to present

	* gdbinv-s.texi, gdb.texinfo, all-config.texi, h8-config.texi:
	stop using silly Roman numerals in @set variable names

Fri Apr 23 07:30:01 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Parameters): Keep trying to get this right.

Wed Apr 21 15:18:47 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Parameters): More on "local parameters".

Mon Apr 19 08:00:51 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Parameters): Re-do "local parameters" section.

Sun Apr 18 09:47:45 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo (Symbol descriptors): Re-do using @table and @xref.
	(Parameters): Rewrite.
	(xcoff-differences, Sun-differences): Minor changes.

Thu Apr 15 02:35:24 1993  John Gilmore  ([email protected])

	* stabs.texinfo:  Minor cleanup.

Wed Apr 14 17:31:00 1993  Jim Kingdon  ([email protected])

	* gdbint.texinfo: Minor xcoff stuff.

Wed Apr  7 14:11:07 1993  Fred Fish  ([email protected])

	* gdbint.texinfo:  Update for new config directory structure.
	Add info about internal type data structures.

Mon Apr  5 09:06:30 1993  Ian Lance Taylor  ([email protected])

	* Makefile.in (SFILES_INCLUDED): gdb-config.texi is no longer in
	$(srcdir).
	(gdb-config.texi): Depend on file in $(srcdir).

Fri Apr  2 16:55:13 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo: Fixes about N_SO.

Fri Mar 26 18:00:35 1993  Roland H. Pesch  ([email protected])

	* gdb.texinfo: include list of nonstandard init file names

	* *-config.texi: new switch GENERIC for text that applies *only*
	to (usual) multiple-target version of manual

	* gdb.texinfo, gdbinv-s.texi: Update conditional markup to correct
	h8 config

	* gdb.texinfo: depend on latest fixed makeinfo, use conditionals
	in menus (rather than conditionally selected multiple alternative
	menus).

	* Makefile.in: define and use DOC_CONFIG var to select
	configuration for GDB user manual.

	* gdb-config.texi: delete from repository, generate from Makefile.

	* all-config.texi: normal `generic' configuration file, formerly
	stored as gdb-config.texi

Wed Mar 24 14:03:19 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)

	* Makefile.in: add dvi target to build all .dvi files

Tue Mar 23 16:03:24 1993  Roland H. Pesch  ([email protected])

	* gdb.texinfo, gdvinv-s.texinfo: formatting improvements.

Fri Mar 19 21:46:50 1993  John Gilmore  ([email protected])

	* gdbint.texinfo:  Doc NO_MMALLOC and NO_MMALLOC_CHECK as
	host conditionals.
	* stabs.texinfo:  More array fixes inspired by Jim's.

Fri Mar 19 10:23:34 1993  Jim Kingdon  ([email protected])

	* stabs.texinfo: Fixes re arrays and continuations.

	* gdbint.texinfo: Add XCOFF node.

Mon Mar  8 15:52:18 1993  John Gilmore  ([email protected])

	* gdb.texinfo:  Add `set print max-symbolic-offset' doc.

Sun Feb 21 17:09:38 1993  Per Bothner  ([email protected])

	* stabs.texinfo:  Fix for array types to mention lower bounds.

Thu Feb 18 01:19:49 1993  John Gilmore  ([email protected])

	* gdbint.texinfo:  Update PTRACE_ARG3_TYPE doc, pull PT_*.

Wed Feb 17 08:15:24 1993  John Gilmore  ([email protected])

	* gdbint.texinfo:  Remove SET_STACK_LIMIT_HUGE from target defines.

Thu Feb 11 10:38:40 1993  John Gilmore  ([email protected])

	* gdbint.texinfo:  Fix thinko (NM_FILE => NAT_FILE).  Found
	by Michael Ben-Gershon <[email protected]>.

Wed Feb 10 23:59:19 1993  John Gilmore  ([email protected])

	* gdbint.texinfo:  Eliminate IBM6000_HOST, document IBM6000_TARGET.

Tue Feb  9 18:26:21 1993  Roland H. Pesch  ([email protected])

	* gdb.texinfo, gdbinv-s.texi: misc updates

Sat Feb  6 10:25:47 1993  John Gilmore  ([email protected])

	* gdbint.texinfo:  Brief documentation for longjmp support,
	from an email msg by Stu.

Fri Feb  5 14:10:15 1993  John Gilmore  ([email protected])

	* stabs.texinfo:  Fix description of floating point "range"
	types (which really define basic types).  Reported by Jim Meehan,
	<[email protected]>.

	* gdbint.texinfo:  Remove COFF_NO_LONG_FILE_NAMES define, now gone.

Thu Feb  4 13:56:46 1993  Ian Lance Taylor  ([email protected])

	* gdbint.texinfo: Slightly expand section on supporting a new
	object file format.

Thu Feb  4 01:49:04 1993  John Gilmore  ([email protected])

	* Makefile.in (refcard.ps, lrefcard.ps):  Remove psref.tex
	intermediate file.

Tue Feb  2 12:18:06 1993  Roland H. Pesch  ([email protected])

	* gdb.texinfo, gdbinv-s.texi: miscellaneous stylistic cleanups

Mon Feb  1 15:35:47 1993  Roland H. Pesch  ([email protected])

	* gdbinv-s.texi: z8000 simulator target name is just "sim"

	* gdbinv-s.texi:  Mention that Z8000 simulator can simulate Z8001
	as well as Z8002.

Sat Nov 28 06:51:35 1992  John Gilmore  ([email protected])

	* gdbint.texinfo:  Add sections on clean design and on how to send
	in changes.

Mon Nov  9 23:57:02 1992  John Gilmore  ([email protected])

	* gdbint.texinfo:  Add how to declare the result of make_cleanup.

Mon Oct 26 11:09:47 1992  John Gilmore  ([email protected])

	* gdb.texinfo:  Fix typo, reported by Karl Berry.

Fri Oct 23 00:41:21 1992  John Gilmore  ([email protected])

	* gdb.texinfo:  Add opcodes dir to GDB distribution description.

Sat Oct 10 18:04:58 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

	* gdbint.texinfo: fixed a stray email address (needs @@),
	added @table @code to node "Native Conditionals"

Tue Sep 22 00:34:15 1992  John Gilmore  ([email protected])

	* gdbint.texinfo:  Describe coding style of GDB.

Mon Sep 21 19:32:16 1992  John Gilmore  ([email protected])

	* stabs.texinfo:  Minor wording changes.

Tue Sep 15 02:57:09 1992  John Gilmore  ([email protected])

	* gdbint.texinfo:  Improve release doc slightly.

Fri Sep 11 01:34:25 1992  John Gilmore  ([email protected])

	* gdbint.texinfo:  Improve doc of GDB config macros.

Wed Sep  9 16:52:06 1992  John Gilmore  ([email protected])

	* stabs.texinfo:  Remove Bothner's changes for C++ nested types.
	These will be reinserted when examined.

Mon Aug 24 01:17:55 1992  John Gilmore  ([email protected])

	* gdbint.texinfo:  Make a start at documenting all the #if macros
	in GDB.  At least list them all, and start separating them into
	host-specific and target-specific.

Tue Aug 18 15:59:13 1992  Roland H. Pesch  ([email protected])

	* gdbinv-s.m4.in: refrain from using @cartouche for just a few
	examples (not consistent w others).  
	gdb.texinfo: issue disclaimer paragraph on cmdline options only
	for generic vn of doc

Tue Aug 18 14:53:27 1992  Ian Lance Taylor  ([email protected])

	* Makefile.in: always create installation directories.

Tue Aug 18 14:11:50 1992  Roland H. Pesch  ([email protected])

	* gdb.texinfo: in h8 config, do not describe searching commands.

Mon Aug 17 18:07:59 1992  Roland H. Pesch  ([email protected])

	* gdb.texinfo, none.m4, h8.m4, gdbinv-s.m4.in: improve H8/300
	  conditionals; introduce a few generic switches that may be
	  useful for other cross-dev or dos-hosted configs.

	* gdb.texinfo: fix typo in "info reg" description

Sun Aug 16 01:16:18 1992  John Gilmore  ([email protected])

	* stabs.texinfo:  Minor updates from running TeX over it.
	* Makefile.in (stabs.dvi, stabs.ps):  Add.

Sat Aug 15 20:52:24 1992  Per Bothner  ([email protected])

	* stabs.texinfo:  Stabs documentation, written by Julia Menapace.
	First pass at converting it to texinfo.

Sat Aug 15 03:14:59 1992  John Gilmore  ([email protected])

	* gdb.texinfo, refcard.tex:  Document mult args on `info reg'.
	* Makefile.in (refcard.ps, lrefcard.ps):  Add missing $(srdir).

Fri Aug 14 21:08:47 1992  John Gilmore  ([email protected])

	* gdbint.texinfo:  Add section on partial symbol tables.

Sat Jun 20 16:31:10 1992  John Gilmore  (gnu at cygnus.com)

	* gdb.texinfo:  document `set remotedebug' and `set
	rstack_high_address'.

Thu May 14 17:09:48 1992  Roland H. Pesch  ([email protected])

	* gdb.texinfo: slight expansion of new text on reading info files
	* gdbinv-s.m4.in: correct and expand info on cross-debugging
	H8/300 from DOS.

Tue May 12 12:22:47 1992  John Gilmore  (gnu at cygnus.com)

	* gdb.texinfo:  `info user' => `show user'.  Noticed by David Taylor.

Mon May 11 19:06:27 1992  John Gilmore  (gnu at cygnus.com)

	* gdb.texinfo:  Say how to read the `info' files.

Tue May  5 12:11:38 1992  K. Richard Pixley  ([email protected])

	* Makefile.in: gm4 -> m4.

Fri Apr 10 17:50:43 1992  John Gilmore  (gnu at rtl.cygnus.com)

	* gdb.texinfo:  Update for GDB-4.5.  Move `Formatting
	Documentation' ahead of `Installing GDB' to match README.
	Update shared library doc, -readnow and -mapped, and directory
	structure (add glob and mmalloc).  Update configure doc.	

Tue Mar 24 23:28:38 1992  K. Richard Pixley  ([email protected])

	* Makefile.in: remove $(srcdir) from gdb.info rule.

Sat Mar  7 18:44:50 1992  K. Richard Pixley  ([email protected])

	* Makefile.in: commented out gdb-all.texinfo rule.  This is
	  temporary.

Wed Feb 26 18:04:40 1992  K. Richard Pixley  ([email protected])

	* Makefile.in, configure.in: removed traces of namesubdir,
	  -subdirs, $(subdir), $(unsubdir), some rcs triggers.  Forced
	  copyrights to '92, changed some from Cygnus to FSF.

Fri Dec 13 09:47:31 1991  John Gilmore  (gnu at cygnus.com)

	* gdb.texinfo:  Improve how we ask for bug reports.

Tue Dec 10 04:07:21 1991  K. Richard Pixley  (rich at rtl.cygnus.com)

	* Makefile.in: infodir belongs in datadir.

Fri Dec  6 23:57:34 1991  K. Richard Pixley  (rich at rtl.cygnus.com)

	* Makefile.in: remove spaces following hyphens, bsd make can't
	  cope.  install using INSTALL_DATA.  added clean-info.  added
	  standards.text support. 

Thu Dec  5 22:46:12 1991  K. Richard Pixley  (rich at rtl.cygnus.com)

	* Makefile.in: idestdir and ddestdir go away.  Added copyrights
	  and shift gpl to v2.  Added ChangeLog if it didn't exist. docdir
	  and mandir now keyed off datadir by default.

\f
Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
End: