kmp204x: Add support for the unit LEDs

The unit LEDs are managed by the QRIO CPLD. This patch adds support for
accessing these LEDs in the QRIO.

The LEDs then are set to a correct boot state:
- UNIT-LED is red
- BOOT-LED is on.

Signed-off-by: Stefan Bigler <[email protected]>
Signed-off-by: Valentin Longchamp <[email protected]>

diff --git a/board/keymile/kmp204x/kmp204x.c b/board/keymile/kmp204x/kmp204x.c
index 95a19cdb2c1869c880e850b25648339530010c85..5fceedd7c35bdf3022e19fb2d1efef206695f7e7 100644 (file)
--- a/board/keymile/kmp204x/kmp204x.c
+++ b/board/keymile/kmp204x/kmp204x.c
@@ -113,6 +113,9 @@ int board_early_init_r(void)
        if (ret)
                printf("error triggering PCIe FPGA config\n");
 
+       /* enable the Unit LED (red) & Boot LED (on) */
+       qrio_set_leds();
+
        return ret;
 }
 

diff --git a/board/keymile/kmp204x/kmp204x.h b/board/keymile/kmp204x/kmp204x.h
index 0267596e4e5eef26eabafa211a06d95e94a25334..34de27eafe4f4ee2f6aa8a37122111f0167979c5 100644 (file)
--- a/board/keymile/kmp204x/kmp204x.h
+++ b/board/keymile/kmp204x/kmp204x.h
@@ -21,5 +21,6 @@ void qrio_gpio_direction_input(u8 port_off, u8 gpio_nr);
 
 void qrio_prst(u8 bit, bool en, bool wden);
 void qrio_prstcfg(u8 bit, u8 mode);
+void qrio_set_leds(void);
 
 void pci_of_setup(void *blob, bd_t *bd);

diff --git a/board/keymile/kmp204x/qrio.c b/board/keymile/kmp204x/qrio.c
index 49f9aa2546242d421d45d5ec47af1ab05f38260d..86df2c7ca98a12beb0a82418c928c2841b75381c 100644 (file)
--- a/board/keymile/kmp204x/qrio.c
+++ b/board/keymile/kmp204x/qrio.c
@@ -144,3 +144,18 @@ void qrio_prstcfg(u8 bit, u8 mode)
 
        out_be32(qrio_base + PRSTCFG_OFF, prstcfg);
 }
+
+#define CTRLH_OFF              0x02
+#define CTRLH_WRL_BOOT         0x01
+#define CTRLH_WRL_UNITRUN      0x02
+
+void qrio_set_leds(void)
+{
+       u8 ctrlh;
+       void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
+
+       /* set UNIT LED to RED and BOOT LED to ON */
+       ctrlh = in_8(qrio_base + CTRLH_OFF);
+       ctrlh |= (CTRLH_WRL_BOOT | CTRLH_WRL_UNITRUN);
+       out_8(qrio_base + CTRLH_OFF, ctrlh);
+}