Platforms can overwrite the weak definition of spl_mmc_boot_mode() to
determine where to load U-Boot proper from.
For most of them this is a trivial decision based on Kconfig variables,
but it might be desirable the probe the actual device to answer this
question.
Pass the pointer to the mmc struct to that function, so implementations
can make use of that.
Compile-tested for all users changed.
Signed-off-by: Andre Przywara <[email protected]>
Reviewed-by: Stefano Babic <[email protected]>
Reviewed-by: Ley Foon Tan <[email protected]> (for SoCFPGA)
Acked-by: Lokesh Vutla <[email protected]> (for OMAP and K3)
Reviewed-by: Simon Glass <[email protected]>
#if defined(CONFIG_SPL_MMC)
/* called from spl_mmc to see type of boot mode for storage (RAW or FAT) */
-u32 spl_mmc_boot_mode(const u32 boot_device)
+u32 spl_mmc_boot_mode(struct mmc *mmc, const u32 boot_device)
{
#if defined(CONFIG_MX7) || defined(CONFIG_IMX8M) || defined(CONFIG_IMX8)
switch (get_boot_device()) {
}
}
-u32 spl_mmc_boot_mode(const u32 boot_device)
+u32 spl_mmc_boot_mode(struct mmc *mmc, const u32 boot_device)
{
switch (boot_device) {
case BOOT_DEVICE_MMC1:
spl_enable_dcache();
}
-u32 spl_mmc_boot_mode(const u32 boot_device)
+u32 spl_mmc_boot_mode(struct mmc *mmc, const u32 boot_device)
{
#if defined(CONFIG_SUPPORT_EMMC_BOOT)
u32 devstat = readl(CTRLMMR_MAIN_DEVSTAT);
spl_enable_dcache();
}
-u32 spl_mmc_boot_mode(const u32 boot_device)
+u32 spl_mmc_boot_mode(struct mmc *mmc, const u32 boot_device)
{
switch (boot_device) {
case BOOT_DEVICE_MMC1:
spl_enable_dcache();
}
-u32 spl_mmc_boot_mode(const u32 boot_device)
+u32 spl_mmc_boot_mode(struct mmc *mmc, const u32 boot_device)
{
switch (boot_device) {
case BOOT_DEVICE_MMC1:
} __packed;
#ifdef CONFIG_SPL_MMC
-u32 spl_mmc_boot_mode(const u32 boot_device)
+u32 spl_mmc_boot_mode(struct mmc *mmc, const u32 boot_device)
{
return MMCSD_MODE_RAW;
}
return gd->arch.omap_boot_device;
}
-u32 spl_mmc_boot_mode(const u32 boot_device)
+u32 spl_mmc_boot_mode(struct mmc *mmc, const u32 boot_device)
{
return gd->arch.omap_boot_mode;
}
return boot_device;
}
-u32 spl_mmc_boot_mode(const u32 boot_device)
+u32 spl_mmc_boot_mode(struct mmc *mmc, const u32 boot_device)
{
return MMCSD_MODE_RAW;
}
}
#ifdef CONFIG_SPL_MMC
-u32 spl_mmc_boot_mode(const u32 boot_device)
+u32 spl_mmc_boot_mode(struct mmc *mmc, const u32 boot_device)
{
#if defined(CONFIG_SPL_FS_FAT) || defined(CONFIG_SPL_FS_EXT4)
return MMCSD_MODE_FS;
}
#ifdef CONFIG_SPL_MMC
-u32 spl_mmc_boot_mode(const u32 boot_device)
+u32 spl_mmc_boot_mode(struct mmc *mmc, const u32 boot_device)
{
#if defined(CONFIG_SPL_FS_FAT) || defined(CONFIG_SPL_FS_EXT4)
return MMCSD_MODE_FS;
return BOOT_DEVICE_MMC1;
}
-u32 spl_mmc_boot_mode(const u32 boot_device)
+u32 spl_mmc_boot_mode(struct mmc *mmc, const u32 boot_device)
{
return MMCSD_MODE_RAW;
}
#include <mmc.h>
#include <spl.h>
-u32 spl_mmc_boot_mode(const u32 boot_device)
+u32 spl_mmc_boot_mode(struct mmc *mmc, const u32 boot_device)
{
- struct mmc *mmc;
-
/*
* work around a bug in the Boot ROM of LD4, Pro4, and sLD8:
*
* Fixup mmc->part_config here because it is used to determine the
* partition which the U-Boot image is read from.
*/
- mmc = find_mmc_device(0);
mmc->part_config &= ~EXT_CSD_BOOT_PART_NUM(PART_ACCESS_MASK);
mmc->part_config |= EXT_CSD_BOOT_PARTITION_ENABLE;
}
#endif
-u32 __weak spl_mmc_boot_mode(const u32 boot_device)
+u32 __weak spl_mmc_boot_mode(struct mmc *mmc, const u32 boot_device)
{
#if defined(CONFIG_SPL_FS_FAT) || defined(CONFIG_SPL_FS_EXT4)
return MMCSD_MODE_FS;
}
}
- boot_mode = spl_mmc_boot_mode(bootdev->boot_device);
+ boot_mode = spl_mmc_boot_mode(mmc, bootdev->boot_device);
err = -EINVAL;
switch (boot_mode) {
case MMCSD_MODE_EMMCBOOT:
#include <asm/global_data.h>
#include <asm/spl.h>
#include <handoff.h>
+#include <mmc.h>
struct blk_desc;
struct image_header;
* Note: It is important to use the boot_device parameter instead of e.g.
* spl_boot_device() as U-Boot is not always loaded from the same device as SPL.
*/
-u32 spl_mmc_boot_mode(const u32 boot_device);
+u32 spl_mmc_boot_mode(struct mmc *mmc, const u32 boot_device);
/**
* spl_mmc_boot_partition() - MMC partition to load U-Boot from.