configs: visionfive2: Enable MULTI_DTB_FIT for JH7110 based board DT

[J-u-boot.git] / configs / socfpga_de10_nano_defconfig

diff --git a/configs/socfpga_de10_nano_defconfig b/configs/socfpga_de10_nano_defconfig
index 53c4ff5ffd28c3005a74b6b8c64e3c15067bc027..703af3f9c214c3d67b17d492710ab23479c209dd 100644 (file)
--- a/configs/socfpga_de10_nano_defconfig
+++ b/configs/socfpga_de10_nano_defconfig
@@ -2,17 +2,19 @@ CONFIG_ARM=y
 CONFIG_SYS_L2_PL310=y
 CONFIG_ARCH_SOCFPGA=y
 CONFIG_SYS_MALLOC_LEN=0x4000000
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0x4400
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_de10_nano"
+CONFIG_DM_RESET=y
+CONFIG_SPL_STACK=0x0
 CONFIG_SPL_TEXT_BASE=0xFFFF0000
 CONFIG_TARGET_SOCFPGA_TERASIC_DE10_NANO=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000
-CONFIG_FIT=y
 CONFIG_TIMESTAMP=y
+CONFIG_FIT=y
+CONFIG_DISTRO_DEFAULTS=y
 # CONFIG_USE_BOOTCOMMAND is not set
 CONFIG_DEFAULT_FDT_FILE="socfpga_cyclone5_de10_nano.dtb"
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
@@ -24,14 +26,12 @@ CONFIG_CLOCKS=y
 CONFIG_SPL_PAD_TO=0x10000
 CONFIG_SPL_NO_BSS_LIMIT=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_STACK=0x0
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000
 CONFIG_SYS_MAXARGS=32
 CONFIG_CMD_ASKENV=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_DFU=y
-# CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
@@ -51,14 +51,13 @@ CONFIG_SYS_DFU_DATA_BUF_SIZE=0x1000000
 CONFIG_DWAPB_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_DW=y
+CONFIG_SYS_MMC_MAX_BLK_COUNT=256
 CONFIG_MMC_DW=y
-CONFIG_MTD=y
 CONFIG_SPI_FLASH_MTD=y
 CONFIG_PHY_MICREL=y
 CONFIG_PHY_MICREL_KSZ90X1=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_MII=y
-CONFIG_DM_RESET=y
 CONFIG_SPI=y
 CONFIG_CADENCE_QSPI=y
 CONFIG_DESIGNWARE_SPI=y
@@ -71,3 +70,4 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
 CONFIG_USB_GADGET_DWC2_OTG=y
 CONFIG_USB_GADGET_DOWNLOAD=y
 # CONFIG_SPL_WDT is not set
+CONFIG_SYS_TIMER_COUNTS_DOWN=y