configs: stm32mp1: Restore boot SPL from sdcard for Engicam i.Core STM32MP1 C.TOUCH 2.0

[J-u-boot.git] / configs / imx8mn_evk_defconfig

diff --git a/configs/imx8mn_evk_defconfig b/configs/imx8mn_evk_defconfig
index 2402e9e8bfb13ac0cf178206725b167ab483dc54..43860fe3f56f9a178bbf83dbedb6a2ca0bba19fe 100644 (file)
--- a/configs/imx8mn_evk_defconfig
+++ b/configs/imx8mn_evk_defconfig
@@ -9,23 +9,23 @@ CONFIG_ENV_SIZE=0x1000
 CONFIG_ENV_OFFSET=0x400000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="freescale/imx8mn-evk"
-CONFIG_SPL_TEXT_BASE=0x912000
 CONFIG_TARGET_IMX8MN_EVK=y
 CONFIG_SYS_MONITOR_LEN=524288
 CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL_STACK=0x980000
+CONFIG_SPL_TEXT_BASE=0x912000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x950000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0x42000000
 CONFIG_SPL=y
 CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
-CONFIG_SYS_LOAD_ADDR=0x42000000
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_DEFAULT_FDT_FILE="imx8mn-evk.dtb"
@@ -44,12 +44,13 @@ CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
+CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
 CONFIG_SPL_WATCHDOG=y
 CONFIG_SYS_PROMPT="u-boot=> "
+CONFIG_CMD_CPU=y
 # CONFIG_CMD_EXPORTENV is not set
 # CONFIG_CMD_IMPORTENV is not set
 CONFIG_CMD_ERASEENV=y
@@ -71,6 +72,8 @@ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 CONFIG_SPL_DM=y
 CONFIG_SPL_CLK_IMX8MN=y
 CONFIG_CLK_IMX8MN=y
+CONFIG_CPU=y
+CONFIG_CPU_IMX=y
 CONFIG_MXC_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_SUPPORT_EMMC_BOOT=y