configs: ls1021a: enable sata configs for all ls1021a defconfigs

[J-u-boot.git] / configs / ls1046ardb_sdcard_defconfig

diff --git a/configs/ls1046ardb_sdcard_defconfig b/configs/ls1046ardb_sdcard_defconfig
index 16cb8f1f006d3062dd99a33c5e1513e3e174dad5..daee64af02697e2a4f041405bdeb561313b61541 100644 (file)
--- a/configs/ls1046ardb_sdcard_defconfig
+++ b/configs/ls1046ardb_sdcard_defconfig
@@ -1,46 +1,64 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS1046ARDB=y
 CONFIG_ARM=y
 CONFIG_TARGET_LS1046ARDB=y

+CONFIG_SYS_TEXT_BASE=0x82000000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y

 CONFIG_FSL_LS_PPA=y
 CONFIG_FSL_LS_PPA=y

-CONFIG_SPL_FSL_LS_PPA=y
-CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb"
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_SPL=y
+CONFIG_AHCI=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_NR_DRAM_BANKS=2

 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL"
 CONFIG_SD_BOOT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL"
 CONFIG_SD_BOOT=y

-CONFIG_ENV_IS_IN_MMC=y

 CONFIG_BOOTDELAY=10
 CONFIG_BOOTDELAY=10

-CONFIG_SPL=y
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
+CONFIG_MISC_INIT_R=y

 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110

-CONFIG_HUSH_PARSER=y
-# CONFIG_CMD_IMLS is not set
+CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_SPL_WATCHDOG_SUPPORT=y

 CONFIG_CMD_GPT=y
 CONFIG_CMD_GPT=y

+CONFIG_CMD_I2C=y

 CONFIG_CMD_MMC=y
 CONFIG_CMD_NAND=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_NAND=y

+CONFIG_CMD_PCI=y

 CONFIG_CMD_SF=y
 CONFIG_CMD_SF=y

-CONFIG_CMD_I2C=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y

 CONFIG_CMD_USB=y
 CONFIG_CMD_USB=y

+CONFIG_CMD_CACHE=y
+CONFIG_MP=y
+CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"

 # CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_OF_CONTROL=y
 # CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_OF_CONTROL=y

+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb"
+CONFIG_ENV_IS_IN_MMC=y

 CONFIG_DM=y
 CONFIG_DM=y

+CONFIG_SATA_CEVA=y

 CONFIG_FSL_CAAM=y
 CONFIG_FSL_CAAM=y

+CONFIG_DM_MMC=y
+CONFIG_FSL_ESDHC=y

 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH=y

-CONFIG_NETDEVICES=y
+CONFIG_PHYLIB=y
+CONFIG_PHY_AQUANTIA=y

 CONFIG_E1000=y
 CONFIG_PCI=y
 CONFIG_DM_PCI=y
 CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCIE_LAYERSCAPE=y
 CONFIG_E1000=y
 CONFIG_PCI=y
 CONFIG_DM_PCI=y
 CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCIE_LAYERSCAPE=y

+CONFIG_DM_SCSI=y

 CONFIG_SYS_NS16550=y
 CONFIG_SYS_NS16550=y

+CONFIG_SPI=y

 CONFIG_DM_SPI=y
 CONFIG_FSL_QSPI=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_DM_SPI=y
 CONFIG_FSL_QSPI=y
 CONFIG_USB=y
 CONFIG_DM_USB=y

-CONFIG_DISTRO_DEFAULTS=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y