Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze

[J-u-boot.git] / drivers / block / sil680.c

diff --git a/drivers/block/sil680.c b/drivers/block/sil680.c
index a6143df4c063df9333f42304d67f8359ff82ffad..3ca64b980d42e81c6ac290a92def9aa41462c911 100644 (file)
--- a/drivers/block/sil680.c
+++ b/drivers/block/sil680.c
@@ -2,24 +2,7 @@
  * (C) Copyright 2007
  * Gary Jennejohn, DENX Software Engineering, [email protected].
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 /* sil680.c - ide support functions for the Sil0680A controller */
 
@@ -27,39 +10,38 @@
  * The following parameters must be defined in the configuration file
  * of the target board:
  *
- * #define CFG_IDE_SIL680
+ * #define CONFIG_IDE_SIL680
  *
  * #define CONFIG_PCI_PNP
  * NOTE it may also be necessary to define this if the default of 8 is
  * incorrect for the target board (e.g. the sequoia board requires 0).
- * #define CFG_PCI_CACHE_LINE_SIZE     0
+ * #define CONFIG_SYS_PCI_CACHE_LINE_SIZE      0
  *
  * #define CONFIG_CMD_IDE
  * #undef  CONFIG_IDE_8xx_DIRECT
  * #undef  CONFIG_IDE_LED
  * #undef  CONFIG_IDE_RESET
  * #define CONFIG_IDE_PREINIT
- * #define CFG_IDE_MAXBUS              2 - modify to suit
- * #define CFG_IDE_MAXDEVICE   (CFG_IDE_MAXBUS*2) - modify to suit
- * #define CFG_ATA_BASE_ADDR   0
- * #define CFG_ATA_IDE0_OFFSET 0
- * #define CFG_ATA_IDE1_OFFSET 0
- * #define CFG_ATA_DATA_OFFSET 0
- * #define CFG_ATA_REG_OFFSET  0
- * #define CFG_ATA_ALT_OFFSET  0x0004
+ * #define CONFIG_SYS_IDE_MAXBUS               2 - modify to suit
+ * #define CONFIG_SYS_IDE_MAXDEVICE    (CONFIG_SYS_IDE_MAXBUS*2) - modify to suit
+ * #define CONFIG_SYS_ATA_BASE_ADDR    0
+ * #define CONFIG_SYS_ATA_IDE0_OFFSET  0
+ * #define CONFIG_SYS_ATA_IDE1_OFFSET  0
+ * #define CONFIG_SYS_ATA_DATA_OFFSET  0
+ * #define CONFIG_SYS_ATA_REG_OFFSET   0
+ * #define CONFIG_SYS_ATA_ALT_OFFSET   0x0004
  *
  * The mapping for PCI IO-space.
  * NOTE this is the value for the sequoia board. Modify to suit.
- * #define CFG_PCI0_IO_SPACE   0xE8000000
+ * #define CONFIG_SYS_PCI0_IO_SPACE   0xE8000000
  */
 
 #include <common.h>
-#if defined(CFG_IDE_SIL680)
 #include <ata.h>
 #include <ide.h>
 #include <pci.h>
 
-extern ulong ide_bus_offset[CFG_IDE_MAXBUS];
+extern ulong ide_bus_offset[CONFIG_SYS_IDE_MAXBUS];
 
 int ide_preinit (void)
 {
@@ -68,7 +50,7 @@ int ide_preinit (void)
        int l;
 
        status = 1;
-       for (l = 0; l < CFG_IDE_MAXBUS; l++) {
+       for (l = 0; l < CONFIG_SYS_IDE_MAXBUS; l++) {
                ide_bus_offset[l] = -ATA_STATUS;
        }
        devbusfn = pci_find_device (0x1095, 0x0680, 0);
@@ -78,11 +60,11 @@ int ide_preinit (void)
                pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_0,
                                       (u32 *) &ide_bus_offset[0]);
                ide_bus_offset[0] &= 0xfffffff8;
-               ide_bus_offset[0] += CFG_PCI0_IO_SPACE;
+               ide_bus_offset[0] += CONFIG_SYS_PCI0_IO_SPACE;
                pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_2,
                                       (u32 *) &ide_bus_offset[1]);
                ide_bus_offset[1] &= 0xfffffff8;
-               ide_bus_offset[1] += CFG_PCI0_IO_SPACE;
+               ide_bus_offset[1] += CONFIG_SYS_PCI0_IO_SPACE;
                /* init various things - taken from the Linux driver */
                /* set PIO mode */
                pci_write_config_byte(devbusfn, 0x80, 0x00);
@@ -106,5 +88,3 @@ int ide_preinit (void)
 void ide_set_reset (int flag) {
        return;
 }
-
-#endif /* CFG_IDE_SIL680 */