spl: move SPL_OS_BOOT to Kconfig

[J-u-boot.git] / include / configs / smartweb.h

diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h
index e11c016aedb1101430bd5ca0da1ae3b537e80c43..df5fe2163f05285ac41a0c3db2ec9d82045816e4 100644 (file)
--- a/include/configs/smartweb.h
+++ b/include/configs/smartweb.h
@@ -45,15 +45,19 @@
 #define CONFIG_CMDLINE_TAG             /* pass commandline to Kernel */
 #define CONFIG_SETUP_MEMORY_TAGS       /* pass memory defs to kernel */
 #define CONFIG_INITRD_TAG              /* pass initrd param to kernel */
-#define CONFIG_SKIP_LOWLEVEL_INIT      /* U-Boot is loaded by a bootloader */
+#define CONFIG_SKIP_LOWLEVEL_INIT_ONLY /* U-Boot is loaded by a bootloader */
 #define CONFIG_BOARD_EARLY_INIT_F      /* call board_early_init_f() */
-#define CONFIG_DISPLAY_CPUINFO         /* display CPU Info at startup */
+
+/* We set the max number of command args high to avoid HUSH bugs. */
+#define CONFIG_SYS_MAXARGS    32
 
 /* setting board specific options */
-# define CONFIG_MACH_TYPE              MACH_TYPE_SMARTWEB
-#define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_CMDLINE_EDITING
+#define CONFIG_MACH_TYPE               MACH_TYPE_SMARTWEB
 #define CONFIG_AUTO_COMPLETE
+#define CONFIG_ENV_OVERWRITE    1 /* Overwrite ethaddr / serial# */
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_AUTOLOAD "yes"
+#define CONFIG_RESET_TO_RETRY
 
 /* The LED PINs */
 #define CONFIG_RED_LED                 AT91_PIN_PA9
@@ -117,6 +121,7 @@
  *
  */
 #define CONFIG_MACB
+#define CONFIG_PHYLIB
 #define CONFIG_USB_HOST_ETHER
 #define CONFIG_USB_ETHER_ASIX
 #define CONFIG_USB_ETHER_MCS7830
@@ -144,7 +149,6 @@
 
 #if !defined(CONFIG_SPL_BUILD)
 /* USB configuration */
-#define CONFIG_CMD_USB
 #define CONFIG_USB_ATMEL
 #define CONFIG_USB_ATMEL_CLK_SEL_PLLB
 #define CONFIG_USB_OHCI_NEW
@@ -153,41 +157,21 @@
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME  "at91sam9260"
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS     2
 
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_ASIX
-#define CONFIG_USB_ETHER_MCS7830
-
 /* USB DFU support */
 #define CONFIG_CMD_MTDPARTS
 #define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITIONS
 
-#define CONFIG_USB_GADGET
 #define CONFIG_USB_GADGET_AT91
 
 /* DFU class support */
-#define CONFIG_CMD_DFU
-#define CONFIG_USB_FUNCTION_DFU
-#define CONFIG_DFU_NAND
-#define CONFIG_USB_GADGET_DOWNLOAD
-#define CONFIG_USB_GADGET_VBUS_DRAW    2
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE   SZ_1M
 #define DFU_MANIFEST_POLL_TIMEOUT      25000
-
-/* USB DFU IDs */
-#define CONFIG_G_DNL_VENDOR_NUM 0x0908
-#define CONFIG_G_DNL_PRODUCT_NUM 0x02d2
-#define CONFIG_G_DNL_MANUFACTURER "Siemens AG"
-
-#define CONFIG_SYS_CACHELINE_SIZE      0x2000
 #endif
 
 /* General Boot Parameter */
-#define CONFIG_BOOTDELAY               3
 #define CONFIG_BOOTCOMMAND             "run flashboot"
-#define CONFIG_BOOT_RETRY_TIME          30
 #define CONFIG_SYS_CBSIZE              512
-#define CONFIG_SYS_MAXARGS             16
 #define CONFIG_SYS_PBSIZE \
        (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_LONGHELP
@@ -219,30 +203,13 @@
        "mtdparts="MTDPARTS_DEFAULT"\0"
 
 /* Command line & features configuration */
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_LOADS
 
 #define CONFIG_CMD_NAND
-#define CONFIG_CMD_FAT
 
 #ifdef CONFIG_MACB
-# define CONFIG_CMD_PING
-# define CONFIG_CMD_DHCP
 #else
-# undef CONFIG_CMD_BOOTD
-# undef CONFIG_CMD_NET
-# undef CONFIG_CMD_NFS
 #endif /* CONFIG_MACB */
 
-#if !defined(CONFIG_SPL_BUILD)
-/* Enable Device-Tree (FDT) support */
-#define CONFIG_OF_LIBFDT
-#define CONFIG_CMD_FDT
-#define CONFIG_FIT
-#endif
-
 #ifdef CONFIG_SPL_BUILD
 #define CONFIG_SYS_INIT_SP_ADDR                0x301000
 #define CONFIG_SPL_STACK_R
@@ -257,7 +224,6 @@
        (ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE)
 #endif
 
-
 /* Defines for SPL */
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_TEXT_BASE           0x0
@@ -270,13 +236,8 @@
 #define CONFIG_SYS_SPL_MALLOC_SIZE      CONFIG_SYS_MALLOC_LEN
 #define CONFIG_SPL_LDSCRIPT    arch/arm/mach-at91/arm926ejs/u-boot-spl.lds
 
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-
 #define CONFIG_SPL_BOARD_INIT
-#define CONFIG_SPL_GPIO_SUPPORT
 #define CONFIG_SYS_NAND_ENABLE_PIN_SPL (2*32 + 14)
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SYS_USE_NANDFLASH       1
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_BASE
@@ -314,6 +275,5 @@
 #define CONFIG_SYS_THUMB_BUILD
 #define CONFIG_SYS_ICACHE_OFF
 #define CONFIG_SYS_DCACHE_OFF
-#undef CONFIG_SPL_OS_BOOT              /* Not supported by existing map */
 #endif
 #endif /* __CONFIG_H */