Convert CONFIG_SYS_LOAD_ADDR to Kconfig

[J-u-boot.git] / configs / pm9g45_defconfig

diff --git a/configs/pm9g45_defconfig b/configs/pm9g45_defconfig
index 2a59ff38a814ad7fafc87549506ca1a70ea06652..7fbf806021ed942cb2cbf35fd17bb469e1b8af23 100644 (file)
--- a/configs/pm9g45_defconfig
+++ b/configs/pm9g45_defconfig
@@ -2,24 +2,59 @@ CONFIG_ARM=y
 CONFIG_ARCH_AT91=y
 CONFIG_SYS_TEXT_BASE=0x73f00000
 CONFIG_TARGET_PM9G45=y
-CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G45"
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="at91sam9m10g45ek"
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_BASE=0xffffee00
+CONFIG_DEBUG_UART_CLOCK=132000000
+CONFIG_ENV_OFFSET_REDUND=0x100000
+CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
+CONFIG_NAND_BOOT=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="fbcon=rotate:3 console=tty0 console=ttyS0,115200 root=/dev/mtdblock4 mtdparts=atmel_nand:128k(bootstrap)ro,256k(uboot)ro,1664k(env),2M(linux)ro,-(root) rw rootfstype=jffs2"
-# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 # CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot> "
+# CONFIG_CMD_BDI is not set
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_IMI is not set
 # CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_LOADS is not set
+CONFIG_CMD_MMC=y
 CONFIG_CMD_NAND=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_JFFS2=y
+CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
 CONFIG_ENV_IS_IN_NAND=y
-# CONFIG_MMC is not set
+CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM=y
+CONFIG_CLK=y
+CONFIG_CLK_AT91=y
+CONFIG_AT91_GPIO=y
+CONFIG_GENERIC_ATMEL_MCI=y
+CONFIG_MTD=y
+# CONFIG_SYS_NAND_USE_FLASH_BBT is not set
+CONFIG_NAND_ATMEL=y
+CONFIG_DM_ETH=y
+CONFIG_MACB=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_AT91=y
+CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_ATMEL_USART=y
+CONFIG_TIMER=y
+CONFIG_ATMEL_PIT_TIMER=y
 CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y