ARM: at91: Convert SPL_GENERATE_ATMEL_PMECC_HEADER to Kconfig

[J-u-boot.git] / include / configs / ea20.h

diff --git a/include/configs/ea20.h b/include/configs/ea20.h
index 3f0f731ddf007506325da034f075e9ed58894910..a644e6781666614223dca5656c0b6f2c7490e783 100644 (file)
--- a/include/configs/ea20.h
+++ b/include/configs/ea20.h
@@ -1,11 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
  *
  * Based on davinci_dvevm.h. Original Copyrights follow:
  *
  * Copyright (C) 2007 Sergey Kubushyn <[email protected]>
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -14,7 +13,6 @@
 /*
  * Board
  */
-#define CONFIG_DRIVER_TI_EMAC
 #define CONFIG_USE_SPIFLASH
 #define        CONFIG_SYS_USE_NAND
 #define CONFIG_DRIVER_TI_EMAC_USE_RMII
@@ -29,7 +27,6 @@
 #define CONFIG_SYS_TIMERBASE           DAVINCI_TIMER0_BASE
 #define CONFIG_SYS_HZ_CLOCK            clk_get(DAVINCI_AUXCLK_CLKID)
 #define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_DA8XX_GPIO
 
 /*
  * Memory Info
@@ -45,8 +42,6 @@
 /* memtest will be run on 16MB */
 #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024)
 
-#define CONFIG_NR_DRAM_BANKS   1 /* we have 1 bank of DRAM */
-
 /*
  * Serial Driver info
  */
@@ -54,9 +49,7 @@
 #define CONFIG_SYS_NS16550_REG_SIZE    -4      /* NS16550 register size */
 #define CONFIG_SYS_NS16550_COM1        DAVINCI_UART0_BASE /* Base address of UART0 */
 #define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID)
-#define CONFIG_CONS_INDEX      1               /* use UART0 for console */
 
-#define CONFIG_SPI
 #define CONFIG_SYS_SPI_BASE            DAVINCI_SPI1_BASE
 #define CONFIG_SYS_SPI_CLK             clk_get(DAVINCI_SPI1_CLKID)
 #define CONFIG_SF_DEFAULT_SPEED                30000000
@@ -66,7 +59,6 @@
  * I2C Configuration
  */
 #define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_DAVINCI
 #define CONFIG_SYS_DAVINCI_I2C_SPEED           100000
 #define CONFIG_SYS_DAVINCI_I2C_SLAVE   10 /* Bogus, master-only in U-Boot */
 
@@ -74,8 +66,6 @@
  * Network & Ethernet Configuration
  */
 #ifdef CONFIG_DRIVER_TI_EMAC
-#define CONFIG_MII
-#define CONFIG_BOOTP_DNS
 #define CONFIG_BOOTP_DNS2
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_NET_RETRY_COUNT 10
@@ -102,9 +92,6 @@
 #define CONFIG_SYS_CBSIZE      1024 /* Console I/O Buffer Size */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
 #define CONFIG_SYS_LOAD_ADDR   (PHYS_SDRAM_1 + 0x700000)
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_LONGHELP
 #define CONFIG_MX_CYCLIC
 
 /*
@@ -118,15 +105,8 @@
 #define CONFIG_CLOCKS
 #endif
 
-#ifndef CONFIG_DRIVER_TI_EMAC
-#endif
-
 /* NAND Setup */
 #ifdef CONFIG_SYS_USE_NAND
-#define CONFIG_MTD_DEVICE
-#define CONFIG_MTD_PARTITIONS
-
-#define CONFIG_NAND_DAVINCI
 #define        CONFIG_SYS_NAND_PAGE_2K
 #define CONFIG_SYS_NAND_NO_SUBPAGE
 #define CONFIG_SYS_NAND_CS             2
@@ -137,10 +117,6 @@
 #define CONFIG_SYS_MAX_NAND_DEVICE     1 /* Max number of NAND devices */
 #endif
 
-/* SPI Flash */
-#ifdef CONFIG_USE_SPIFLASH
-#endif
-
 #if !defined(CONFIG_SYS_USE_NAND) && \
        !defined(CONFIG_USE_NOR) && \
        !defined(CONFIG_USE_SPIFLASH)
@@ -156,7 +132,7 @@
  * to update uboot and load kernel
  */
 
-#define CONFIG_HOSTNAME ea20
+#define CONFIG_HOSTNAME "ea20"
 #define        CONFIG_EXTRA_ENV_SETTINGS                               \
        "as=3\0"                                                        \
        "netdev=eth0\0"                                         \
@@ -193,9 +169,9 @@
        "loadaddr=c0000014\0"                                           \
        "memory=32M\0"                                                  \
        "kernel_addr_r=c0700000\0"                                      \
-       "hostname=" __stringify(CONFIG_HOSTNAME) "\0"                   \
-       "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0"            \
-       "ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/image.ext2\0"    \
+       "hostname=" CONFIG_HOSTNAME "\0"                        \
+       "bootfile=" CONFIG_HOSTNAME "/uImage\0"         \
+       "ramdisk_file=" CONFIG_HOSTNAME "/image.ext2\0" \
        "flash_self=run ramargs addip addtty addmtd addmisc addmem;"    \
                        "bootm ${kernel_addr_r}\0"                      \
        "flash_nfs=run nfsargs addip addtty addmtd addmisc addmem;"     \
@@ -224,7 +200,7 @@
        "net_nandrw=tftp ${kernel_addr_r} ${bootfile}; run nandrwargs"  \
                " addip addtty addmtd addmisc addmem;"                  \
                "clrlogo;bootm ${kernel_addr_r}\0"                      \
-       "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0"          \
+       "u-boot=" CONFIG_HOSTNAME "/u-boot.bin\0"               \
        "load_magic=if sf probe 0;then sf "                             \
                "read c0000000 0x10000 0x60000;fi\0"                    \
        "load_nand=ubi part nand0,${as};ubifsmount ubi:rootfs;"         \