#define __IMX8M_EVK_H
#include <linux/sizes.h>
+#include <linux/stringify.h>
#include <asm/arch/imx-regs.h>
+#define CONFIG_SYS_BOOTM_LEN (32 * SZ_1M)
+
#define CONFIG_SPL_MAX_SIZE (124 * 1024)
#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300
-#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#ifdef CONFIG_SPL_BUILD
/*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
-#define CONFIG_SPL_WATCHDOG_SUPPORT
-#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
-#define CONFIG_SPL_POWER_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_WATCHDOG
+#define CONFIG_SPL_DRIVERS_MISC
+#define CONFIG_SPL_POWER
+#define CONFIG_SPL_I2C
#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds"
#define CONFIG_SPL_STACK 0x187FF0
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT
-#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_GPIO
+#define CONFIG_SPL_MMC
#define CONFIG_SPL_BSS_START_ADDR 0x00180000
#define CONFIG_SPL_BSS_MAX_SIZE 0x2000 /* 8 KB */
#define CONFIG_SYS_SPL_MALLOC_START 0x42200000
#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
#undef CONFIG_DM_MMC
-#undef CONFIG_DM_PMIC
-#undef CONFIG_DM_PMIC_PFUZE100
-
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
#define CONFIG_POWER_PFUZE100
#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
#endif
#define CONFIG_REMAKE_ELF
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
-
-#undef CONFIG_CMD_EXPORTENV
-#undef CONFIG_CMD_IMPORTENV
-#undef CONFIG_CMD_IMLS
-
-#undef CONFIG_CMD_CRC32
-
/* ENET Config */
/* ENET1 */
#if defined(CONFIG_CMD_NET)
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
#define CONFIG_MII
#define CONFIG_ETHPRIME "FEC"
#define CONFIG_PHY_GIGE
#define IMX_FEC_BASE 0x30BE0000
+#endif
+
+#ifndef CONFIG_SPL_BUILD
+#define BOOT_TARGET_DEVICES(func) \
+ func(MMC, mmc, 0) \
+ func(MMC, mmc, 1) \
+ func(DHCP, dhcp, na)
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_ATHEROS
+#include <config_distro_bootcmd.h>
#endif
-#define CONFIG_MFG_ENV_SETTINGS \
- "mfgtool_args=setenv bootargs console=${console},${baudrate} " \
- "rdinit=/linuxrc " \
- "g_mass_storage.stall=0 g_mass_storage.removable=1 " \
- "g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\
- "g_mass_storage.iSerialNumber=\"\" "\
- "clk_ignore_unused "\
- "\0" \
- "initrd_addr=0x43800000\0" \
- "initrd_high=0xffffffff\0" \
- "bootcmd_mfg=run mfgtool_args;booti ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \
/* Initial environment variables */
#define CONFIG_EXTRA_ENV_SETTINGS \
- CONFIG_MFG_ENV_SETTINGS \
- "script=boot.scr\0" \
+ BOOTENV \
+ "scriptaddr=0x43500000\0" \
+ "kernel_addr_r=0x40880000\0" \
"image=Image\0" \
- "console=ttymxc0,115200 earlycon=ec_imx6q,0x30860000,115200\0" \
+ "console=ttymxc0,115200\0" \
"fdt_addr=0x43000000\0" \
- "fdt_high=0xffffffffffffffff\0" \
"boot_fdt=try\0" \
"fdt_file=imx8mq-evk.dtb\0" \
"initrd_addr=0x43800000\0" \
- "initrd_high=0xffffffffffffffff\0" \
- "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
+ "bootm_size=0x10000000\0" \
"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
- "mmcautodetect=yes\0" \
- "mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \
- "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
- "bootscript=echo Running bootscript from mmc ...; " \
- "source\0" \
- "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
- "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
- "mmcboot=echo Booting from mmc ...; " \
- "run mmcargs; " \
- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
- "if run loadfdt; then " \
- "booti ${loadaddr} - ${fdt_addr}; " \
- "else " \
- "echo WARN: Cannot load the DT; " \
- "fi; " \
- "else " \
- "echo wait for boot; " \
- "fi;\0" \
- "netargs=setenv bootargs console=${console} " \
- "root=/dev/nfs " \
- "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
- "netboot=echo Booting from net ...; " \
- "run netargs; " \
- "if test ${ip_dyn} = yes; then " \
- "setenv get_cmd dhcp; " \
- "else " \
- "setenv get_cmd tftp; " \
- "fi; " \
- "${get_cmd} ${loadaddr} ${image}; " \
- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
- "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
- "booti ${loadaddr} - ${fdt_addr}; " \
- "else " \
- "echo WARN: Cannot load the DT; " \
- "fi; " \
- "else " \
- "booti; " \
- "fi;\0"
-
-#define CONFIG_BOOTCOMMAND \
- "mmc dev ${mmcdev}; if mmc rescan; then " \
- "if run loadbootscript; then " \
- "run bootscript; " \
- "else " \
- "if run loadimage; then " \
- "run mmcboot; " \
- "else run netboot; " \
- "fi; " \
- "fi; " \
- "else booti ${loadaddr} - ${fdt_addr}; fi"
/* Link Definitions */
-#define CONFIG_LOADADDR 0x40480000
-
-#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
#define CONFIG_SYS_INIT_RAM_SIZE 0x80000
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_SYS_MMC_ENV_DEV 1 /* USDHC2 */
#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN ((CONFIG_ENV_SIZE + (2 * 1024)) * 1024)
-
#define CONFIG_SYS_SDRAM_BASE 0x40000000
#define PHYS_SDRAM 0x40000000
#define PHYS_SDRAM_SIZE 0xC0000000 /* 3GB DDR */
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \
- (PHYS_SDRAM_SIZE >> 1))
-
-#define CONFIG_BAUDRATE 115200
-
-#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART1_BASE_ADDR
/* Monitor Command Prompt */
#undef CONFIG_SYS_PROMPT
#define CONFIG_SYS_PROMPT "u-boot=> "
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#define CONFIG_SYS_CBSIZE 1024
#define CONFIG_SYS_MAXARGS 64
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#define CONFIG_IMX_BOOTAUX
-#define CONFIG_CMD_MMC
-
#define CONFIG_SYS_FSL_USDHC_NUM 2
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
#define CONFIG_MXC_GPIO
-#define CONFIG_CMD_FUSE
-
-/* I2C Configs */
-#define CONFIG_SYS_I2C_SPEED 100000
-
#define CONFIG_OF_SYSTEM_SETUP
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_DM_PMIC
-#endif
-
#endif
projects / J-u-boot.git / blobdiff